Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 114 views

    79 fc222

    Uploaded by

    jorgeroa111
    The document describes fault code 222 for an ambient air pressure sensor circuit with low voltage detected. The fault causes engine power output to be derated by 15%. The sensor location depends on the engine model. Technicians should check the actual and reported air pressure readings and verify if a sensor is required for calibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    79 fc222

    Uploaded by

    jorgeroa111
    114 views2 pages
    The document describes fault code 222 for an ambient air pressure sensor circuit with low voltage detected. The fault causes engine power output to be derated by 15%. The sensor location depends on the engine model. Technicians should check the actual and reported air pressure readings and verify if a sensor is required for calibration.

    Original Title

    79-fc222

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes fault code 222 for an ambient air pressure sensor circuit with low voltage detected. The fault causes engine power output to be derated by 15%. The sensor location depends on the engine model. Technicians should check the actual and reported air pressure readings and verify if a sensor is required for calibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    114 views2 pages

    79 fc222

    Uploaded by

    jorgeroa111
    The document describes fault code 222 for an ambient air pressure sensor circuit with low voltage detected. The fault causes engine power output to be derated by 15%. The sensor location depends on the engine model. Technicians should check the actual and reported air pressure readings and verify if a sensor is required for calibration.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    File: 79-fc222

    Page 1 of 2

    Fault Code 222


    Ambient Air Pressure Sensor Circuit
    CODES
    Fault Code: 222
    PID(P), SID(S): P108
    SPN: 108
    FMI: 4
    Lamp: Yellow
    SRT: 00-095

    REASON
    Low voltage detected at the
    ambient air pressure sensor signal
    pin 27 of the sensor harness
    connector.

    EFFECT
    Engine power output derated by 15%.

    Ambient Air Pressure Sensor Circuit


    Circuit Description:
    The ambient air pressure sensor monitors atmospheric pressure and passes information to the electronic control module
    (ECM) through the sensor harness.
    Component Location:
    M11 - The ambient air pressure sensor is located on the engine block above the fuel supply pump.
    N14 - The ambient air pressure sensor is located on the engine block to the right of the ECM.
    Shop Talk:
    Monitor the ambient air pressure reading with a service tool to confirm that the pressure reading matches the actual air
    pressure.
    For active Fault Code 222 after a recalibration, verify an ambient air pressure sensor is part of the Control Parts List
    (CPL). If not, recalibrate with a calibration without save and restore that does not require an ambient air pressure sensor,
    or install an ambient air pressure sensor.

    Refer to Troubleshooting Fault Code t05-222

    2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A.


    All Rights Reserved.

    Printed from QuickServe Online.


    Last Modified: 02-Mar-2011

    File: 79-fc222

    2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A.


    All Rights Reserved.

    Page 2 of 2

    Printed from QuickServe Online.


    Last Modified: 02-Mar-2011

    You might also like