Turboexpander/Compressor Data Sheet Si Units: Operating Conditions Normal Case Case A Case B EXP Comp EXP Comp EXP Comp

JOB NO.
ITEM NO.
PURCHASE ORDER NO.

SPECIFICATION NO.
TURBOEXPANDER/COMPRESSOR
DATA SHEET
SI UNITS
1 APPLICABLE TO:
PROPOSAL
PURCHASE
REVISION NO.
PAGE
OF
BY
AS-BUILT
2 SERVICE
NO. REQUIRED
3 MANUFACTURER
4 NOTE:
DATE
1
MODEL
INFORMATION TO BE COMPLETED:
BY PURCHASER
BY MANUFACTURER
EITHER, BUT BY VENDOR IF NOT BY PURCHASER
OPERATING CONDITIONS
NORMAL CASE
7
(ALL DATA ON PER UNIT BASIS)
EXP
CASE A
COMP
EXP
CASE B
COMP
EXP
COMP
9 INLET CONDITIONS:
10
MMm3/day (m3/h): (1.03 BAR & 0C DRY)
11
WEIGHT FLOW, kg/HR (EXP: WET / DRY; COMP: WET / DRY)
12
PRESSURE (BAR abs)
13
TEMPERATURE (C)
14
MOLECULAR WEIGHT
15
16
17 DISCHARGE CONDITIONS:
18
PRESSURE (BAR abs)
19
TEMPERATURE (C)
20
WEIGHT PERCENT LIQUID (%)
21
GAS kW
22
SPEED (RPM)
23
ADIABATIC/POLYTROPIC EFFICIENCY (Exp/Comp, %)
24
25
26
GUARANTEE CASE (check one case)
27
28 VARIABLE INLET GUIDE VANE PROCESS CONTROL SIGNAL SOURCE:
29
TYPE:
30
ELECTRONIC
RANGE:
MA
PNEUMATIC
BARG
31
32
33
34
35 CASING CONNECTIONS:
36
37
FLANGED
SIZE
CONNECTION
38
NPS/RATING
FACING
POSITION
MATING FLG
GAS
OR
& GASKET
VELOCITY
STUDDED
BY VENDOR
m/SEC.
39 EXPANDER INLET
40 EXPANDER DISCHARGE
41
42 COMPRESSOR INLET
43 COMPRESSOR DISCHARGE
44 REMARKS:
45
46
47
48
49
319679146.xlsx, page 1
Page 1 of 6, Date Printed: 05/30/2016
JOB NO.
TURBOEXPANDER / COMPRESSOR
DATA SHEET
SI UNITS
PAGE
DATE
OF
BY
OPERATING CONDITIONS (Continued)
1
NORMAL
2 GAS ANALYSIS:
3
ITEM NO.
REVISION NO.
MOL %
EXP
WT %
CASE A
COMP
EXP
CASE B
COMP
EXP
SEAL
COMP
REMARKS:
GAS
MW
5 HELIUM
4.000
6 HYDROGEN
2.016
7 NITROGEN
28.016
8 WATER VAPOR
18.016
9 CARBON DIOXIDE
44.010
10 HYDROGEN SULFIDE
34.076
11 METHANE
16.042
12 ETHYLENE
28.052
13 ETHANE
30.068
14 PROPYLENE
42.078
15 PROPANE
44.094
16 I-BUTANE
58.120
17 n-BUTANE
58.120
18 I-PENTANE
72.146
19 n-PENTANE
72.146
20 HEXANE PLUS
21
22
23
24
25 TOTAL
26 AVG. MOL. WT.
27 SITE DATA
28
APPLICABLE SPECIFICATIONS:
ELEVATION
BAROMETER
BARA
VENDOR STANDARD
29
RANGE OF AMBIENT TEMPS:
30
NORMAL
API 617, 7TH EDITION
31
MAXIMUM
NOISE SPECIFICATIONS:
32
MINIMUM
VENDOR STANDARD
OTHER:
33 LOCATION:
PURCHASER SPECIFICATION
34
INDOOR
OUTDOOR
GRADE
35
HEATED
UNDER ROOF
MEZZANINE
36
UNHEATED
PARTIAL SIDES
37
AREA CLASSIFICATION
38
CLASS
GROUP
39
ZONE
GROUP
40 UNUSUAL CONDITIONS:
41
WINTERIZATION REQ'D.
42
OTHER
43
SEE SPECIFICATION
ACOUSTIC COVERING:
YES
NO
PAINTING:
NEC
IEC
DIV.
OTHER
TEMP CLASS
DUST
VENDOR STANDARD
SHIPPING PREPARATION:
FUMES
TROPICALIZATION REQ'D.
DOMESTIC PACKING
EXPORT PACKING (MIL-P 116J METHOD II)
SPECIAL:
DELIVERY:
44 REMARKS:
FCA FACTORY
45
OTHER:
FOB SITE (DOMESTIC ONLY)
46
47
SPARE ROTATING ASSEMBLY:
48
WOODEN SHIPPING CONTAINER
49
METAL SHIPPING CONTAINER W/ PURGE PROVISION
319679146.xlsx, page 2
JOB NO.
DATA SHEET
SI UNITS
ITEM NO.
REVISION NO.
PAGE
DATE
OF
BY
CONSTRUCTION FEATURES
1
2
SPEEDS:
MAX. CONT.
IMPELLERS:
TIP SPEEDS:
RPM
TRIP
RPM
EXP
EXPANDER
m/SEC @ MCS
TYPE (OPEN, ENCLOSED)
COMPRESSOR
m/SEC @ MCS
TYPE FABRICATION
LATERAL CRITICAL SPEEDS (DAMPED)
FIRST CRITICAL
EXPANDER WHEEL MATERIAL

YIELD STRENGTH (MPa)
MAX
UNDAMPED CRITICAL SPEED MAP
HARDNESS:
BNH / RC
RPM
BENDING MODE
COMPLETE ROTORDYNAMIC ANALYSIS
COMPRESSOR WHEEL MATERIAL
10
MAX
11
HARDNESS:
BNH / RC
12
CASINGS:
13
MODEL
14
EXP
15
CASING SPLIT
16
MATERIAL
BRG HSG
ASTM A-351 CF8
18
ASTM A-352 LC3
19
ASTM A-352 LCC
20
ASTM A-216 WCB
(TYP)
MIN
(TYP)
(TYP)
COMP
MATERIAL
SHAFT END:
21
TAPERED
CYLINDRICAL
22
DESIGN PRES, PSIG
23
MAX DESIGN TEMP, C
24
MIN. DESIGN TEMP, C
25
VISUAL INSPECTION
26
CHARPY TESTING
27
MAGNETIC PARTICLE
28
LIQUID PENETRANT
SINGLE PORT BUFFERED LABYRINTH
29
CRITICAL AREA X-RAY
DOUBLE PORT BUFFERED LABYRINTH
SHAFT HARDNESS (BNH)(Rc)
SHAFT SEALS:
30
TRIPLE PORT BUFFERED LABYRINTH

BLEED PRESSURE:
31
HYDROTEST PRESS
1.5 X DESIGN
CASING LEAK TEST
1.0 X DESIGN
33
34
MIN
(TYP)
SHAFT:
17
32
COMP
DIAMETER (mm)
BARG
DRY GAS SEAL:

TYPE BUFFER GAS
35
100% NITROGEN
36
NITROGEN / HELIUM MIX (90 / 10)
37
100% HELIUM
TYPE:
BARG
MAX SUPPLY PRESS.
40
MIN SUPPLY TEMP.
41
MAX SUPPLY TEMP.
42
NORMAL FLOW
nm3/min @
BAR P
MAX FLOW
nm3/min @
BAR P
39
LEAK TEST PERFORMED FOLLOWING
SEAL GAS REQUIREMENTS :

MIN. SUPPLY PRESS.
38
NOTE:
BARG
BUFFER GAS SUPPLY PRESSURE

OTHER
HYDROTEST USING SOAP BUBBLE METHOD
43
44
NOTE: PURCHASER TO SUPPLY SEAL GAS
45
COMPOSITION ON SHEET 2.
46
47
48
49
319679146.xlsx, page 3
JOB NO.
DATA SHEET
SI UNITS
ITEM NO.
REVISION NO.
PAGE
DATE
OF
BY
CONSTRUCTION FEATURES (CONTINUED)
1
2 BEARINGS:
3 RADIAL:
4
THRUST:
TYPE:
TYPE:
SLEEVE BEARING
TAPERED LAND THRUST BEARING
TILTING PAD BEARING
TILTING PAD THRUST BEARING
ACTIVE MAGNETIC BEARING
ACTIVE MAGNETIC THRUST BEARING
OTHER
OTHER
MATERIAL:
MANUFACTURER
10
ALUMINUM (BABBITTED)
LUBRICATION:
11
BRASS / BRONZE(BABBITTED)
THRUST COLLAR / DISK:
12
CARBON STEEL (BABBITTED)
VIBRATION DETECTORS:
13
OTHER
14
SHAFT DIA. (mm)
15
MANUFACTURER
TYPE:
INDUCTIVE
MODEL
TYPE
NO. PER JOURNAL BEARING
THERMOCOUPLES
19
RESISTANCE TEMP DETECTORS
21
EDDY CURRENT
TYPE:
TOTAL NO.
IF REQ'D, OSCILLATOR-DEMODULATORS SUPPLIED BY:
RESISTANCE MAT'L
OHMS
VENDOR
MODEL
PURCHASER
MODEL
MACHINE VIBRATION PROTECTION LOGIC DEVICE:
LOCATION / QTY
22
SINGLE DUAL ELEMENT (MAIN & SPARE)
23
TEMPERATURE PROTECTION LOGIC DEVICE:
PER BRG
VIBRATION MONITOR
DCS
PLC
OTHER
24
TEMPERATURE MONITOR
DCS
LOGIC DEVICE PROVIDED BY:
25
PLC
OTHER
LOCATION OF VIBRATION PROTECTION LOGIC DEVICE:
26
LOGIC DEVICE SUPPLIED BY:
VENDOR
27
LOCATION OF TEMPERATURE PROTECTION LOGIC DEVICE:
28
LOCAL CONTROL PANEL
REMOTE CONTROL PANEL
29
MAIN CONTROL ROOM
OTHER
30
PURCH
VENDOR
LOCAL CONTROL PANEL
VIBRATION AMPLITUDE DISPLAY

VIBRATION MONITOR
BEARING TEMPERATURE DISPLAY TYPE:
MODEL
ALPHANUMERIC DISPLAY
TEMPERATURE MONITOR
32
ALPHANUMERIC DISPLAY
OTHER
33
MMI / VDU
DISPLAY DEVICE PROVIDED BY:
34
PURCHASER
LOCATION OF DISPLAY DEVICE:
36
MODEL
MMI / VDU
OTHER
VENDOR
PURCH
37
LOCATION OF TEMPERATURE DISPLAY DEVICE:
38
LOCAL CONTROL PANEL
39
MAIN CONTROL ROOM
OTHER
YES
UPS SUPPLIED BY:

LOCAL PANEL
MAIN CONTROL ROOM
43
TYPE:
44
QUANTITY
ELECTROMAGNETIC
VENDOR
PURCHASER
EDDY CURRENT
REMOTE PANEL
CABLE LENGTH FROM MACHINE SKID

m
TO CONTROL CABINET:
45
49
NO
LOCATION OF CONTROL CABINET:
42 SPEED PROBES:
48
MAGNETIC BEARING CONTROL CABINET, IF REQUIRED
41
47
PURCH
MAIN CONTROL ROOM

KEY PHASOR
40
46
VENDOR
LOCAL CONTROL PANEL
DISPLAY DEVICE PROVIDED BY:
PURCH
MAIN CONTROL ROOM
31
35
N/A
SEPARATE
LOCATION AND QUANTITY:
18
20
DIRECTED
INTEGRAL
MFR
16 BEARING TEMPERATURE DEVICES:

17
FLOODED
POWER AND SIGNAL CABLES:

MACHINE PROTECTION LOGIC DEVICE:
SWITCH
SPEED MONITOR
MODBUS
LOCATION OF SPEED DISPLAY:

LOCAL PANEL
319679146.xlsx, page 4
SUPPLIED BY PURCHASER
REMOTE DISPLAY
SUPPLIED BY VENDOR
COMUNICATION PROTOCOL
POWER CONSUMPTION:
OTHER:
kW
JOB NO.
DATA SHEET
SI UNITS
1
ITEM NO.
REVISION NO.
PAGE
OTHER CONNECTIONS
DATE
OF
BY
ALLOWABLE PIPING FORCES AND MOMENTS:

NO.
2 SERVICE:
SIZE
TYPE
1.85 X NEMA SM23
3 LUBE-OIL INLET
3 X NEMA SM23
4 LUBE OIL OUTLET
OTHER:
5 SEAL GAS INLET
CASING DRAINS:
6 SEAL GAS OUTLET
PLUGGED
FLANGED AND VALVED
7 CASING DRAINS, EXP / COMP
FLANGED
FLANGED, VALVED, AND MANIFOLDED
8 INTERMEDIATE BLEED
9 THRUST PRESSURES
10 WHEEL PRESSURES, EX / COM
11 BEARING HOUSING PRES
12
13
14
15
ACCESSORIES
16
17
18
EXPANDER INLET TRIP VALVE:

TYPE:
19
BUTTERFLY VALVE
20
OTHER:
21
DESIGN PRESSURE:
22
MATERIAL:
23
SIZE:
RATING:
BARG
STAINLESS STEEL
ALLOWABLE PRESSURE DROP:
DESIGN TEMPERATURE (MIN / MAX)
LOW TEMP CARBON STEEL
24
TRIP VALVE SUPPLIED BY:
25
INLET SCREENS AND PIPE SPOOLS:
26
INLET SCREENS:
CARBON STEEL
VENDOR
EXP
OTHER:
COMP
INLET SPOOLS FOR INLET SCREENS:
EXP
TYPE: (CONE, BASKET, OTHER)
SIZE
28
SIZE (DIA. IN mm)
RATING
29
MESH SIZE
FACING
30
PRESSURE DROP (BAR)
DESIGN PRESSURE:
31
MATERIAL:
DESIGN TEMPERATURE (MIN/MAX)
33
STAINLESS STEEL
OTHER
COMP
BARG
MATERIAL:
STAINLESS STEEL
34
35
PURCHASER
27
32
BAR
INLET SCREENS SUPPLIED BY:
36
VENDOR
LOW TEMP CARBON STEEL
PURCHASER
CARBON STEEL
37
OTHER:
SPOOL CONSTRUCTION:
38
39
SLIP-ON / SOCKETWELD
40
SOCKETWELD
WELDNECK / BUTTWELD
41
42
PIPE SPECIFICATION:
43
44
COMPRESSOR ANTI-SURGE SYSTEM
45
CONTROLLER:
46
RECYCLE VALVE
47
PID CONTROLLER
TYPE:
DESIGN PRESSURE:
BARG
NOISE LIMIT:
VENDOR STD
INLET FLOW DEVICE
49
COMP. INLET FLOW TRANSMITTER
SPECIAL:
TYPE:
48
319679146.xlsx, page 5
OTHER:
MTL:
BY:
COMP. DIFF. PRESSURE TRANSMITTER
JOB NO.
DATA SHEET
SI UNITS
PAGE
1 SHOP INSPECTION AND TESTS:
DATE
OF
BY
UTILITY CONDITIONS:
REQ'D
ITEM NO.
REVISION NO.
3 CLEANLINESS
OBSRV
WTNS
INSTRUMENT AIR FOR GUIDE VANE ACTUATOR:

MAX PRESS
BARG
MIN PRESS
BARG
4 HYDROSTATIC
5 LOW SPEED BALANCE (ISO 1940 G2.5)
6 IMPELLER OVERSPEED (115% OF MCS)
7 IMPELLER RESONANCE TEST
8 MECHANICAL RUN
9
10
MAIN
SPARE
CONTRACT PROBES
MISCELLANEOUS:
SHOP PROBES
RECOMMENDED STRAIGHT RUN OF PIPE DIAMETERS
11 VARY LUBE & SEAL OIL PRESSURES

12 AND TEMPERATURES
AT EXPANDER DISCHARGE:
AT COMPRESSOR INLET:
13 POLAR FORM VIB DATA
VENDOR TO REVIEW & COMMENT ON PURCHASER'S
14 TAPE RECORD VIB DATA
PIPING & FOUNDATION
15 TAPE DATA TO PURCHASER
VENDOR TO REVIEW & COMMENT ON PURCHASER'S
16 PERFORMANCE TEST (AIR)
CONTROL SYSTEMS
17 COMPLETE UNIT TEST

18 HE/N2 CASING LEAK TEST
19 SOUND LEVEL TEST
20 FULL POWER TEST
21
WEIGHTS (kg):
22
EXP / COMP UNIT
kg
23
MAINTENANCE (SPARE ROTATING ASSY)
kg
24
TOTAL MACHINERY SKID WEIGHT:
kg
25
TOTAL SUPPORT SYSTEM SKID WT. (IF SEPARATE):
kg
26
27
28
SPACE REQUIREMENTS (m):
29
MACHINERY SKID:
30
SUPPORT SYSTEM SKID:
31
32
33
34
35
36
37
38 REMARKS:
39
40
41
42
43
44
45
46
47
48
49
319679146.xlsx, page 6

Turboexpander/Compressor Data Sheet Si Units: Operating Conditions Normal Case Case A Case B EXP Comp EXP Comp EXP Comp

Uploaded by

Copyright:

Available Formats

Turboexpander/Compressor Data Sheet Si Units: Operating Conditions Normal Case Case A Case B EXP Comp EXP Comp EXP Comp

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Turboexpander/Compressor Data Sheet Si Units: Operating Conditions Normal Case Case A Case B EXP Comp EXP Comp EXP Comp

Uploaded by

Copyright:

Available Formats

JOB NO.

PURCHASE ORDER NO.

EITHER, BUT BY VENDOR IF NOT BY PURCHASER

MMm3/day (m3/h): (1.03 BAR & 0C DRY)

WEIGHT FLOW, kg/HR (EXP: WET / DRY; COMP: WET / DRY)

PRESSURE (BAR abs)

PRESSURE (BAR abs)

WEIGHT PERCENT LIQUID (%)

ADIABATIC/POLYTROPIC EFFICIENCY (Exp/Comp, %)

GUARANTEE CASE (check one case)

Page 1 of 6, Date Printed: 05/30/2016

OPERATING CONDITIONS (Continued)

RANGE OF AMBIENT TEMPS:

API 617, 7TH EDITION

FOB SITE (DOMESTIC ONLY)

SPARE ROTATING ASSEMBLY:

WOODEN SHIPPING CONTAINER

METAL SHIPPING CONTAINER W/ PURGE PROVISION

Page 2 of 6, Date Printed: 05/30/2016

TYPE (OPEN, ENCLOSED)

LATERAL CRITICAL SPEEDS (DAMPED)

EXPANDER WHEEL MATERIAL

UNDAMPED CRITICAL SPEED MAP

COMPLETE ROTORDYNAMIC ANALYSIS

COMPRESSOR WHEEL MATERIAL

YIELD STRENGTH (MPa)

ASTM A-351 CF8

ASTM A-352 LC3

ASTM A-352 LCC

ASTM A-216 WCB

YIELD STRENGTH (MPa)

DESIGN PRES, PSIG

MAX DESIGN TEMP, C

MIN. DESIGN TEMP, C

SINGLE PORT BUFFERED LABYRINTH

CRITICAL AREA X-RAY

DOUBLE PORT BUFFERED LABYRINTH

SHAFT HARDNESS (BNH)(Rc)

TRIPLE PORT BUFFERED LABYRINTH

CASING LEAK TEST

DRY GAS SEAL:

NITROGEN / HELIUM MIX (90 / 10)

MAX SUPPLY PRESS.

MIN SUPPLY TEMP.

MAX SUPPLY TEMP.

LEAK TEST PERFORMED FOLLOWING

SEAL GAS REQUIREMENTS :

BUFFER GAS SUPPLY PRESSURE

HYDROTEST USING SOAP BUBBLE METHOD

NOTE: PURCHASER TO SUPPLY SEAL GAS

Page 3 of 6, Date Printed: 05/30/2016

CONSTRUCTION FEATURES (CONTINUED)

TAPERED LAND THRUST BEARING

TILTING PAD BEARING

TILTING PAD THRUST BEARING

ACTIVE MAGNETIC BEARING

ACTIVE MAGNETIC THRUST BEARING

THRUST COLLAR / DISK: