Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31K views

    Laser Printer 6 Steps

    Uploaded by

    Moe B. Us
    Remember the line "Charlie Can Walk Dance & Talk French". The first letters are in the order of the 6 steps.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Laser Printer 6 Steps

    Uploaded by

    Moe B. Us
    31K views2 pages
    Remember the line "Charlie Can Walk Dance & Talk French". The first letters are in the order of the 6 steps.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Remember the line "Charlie Can Walk Dance & Talk French". The first letters are in the order of the 6 steps.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    31K views2 pages

    Laser Printer 6 Steps

    Uploaded by

    Moe B. Us
    Remember the line "Charlie Can Walk Dance & Talk French". The first letters are in the order of the 6 steps.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    Remember the line "Charlie Can Walk Dance & Talk French".

    The first letters are in the order of the 6 steps.

    1. Cleaning: Excess toner is scraped from the photoelectric drum.


    2. Conditioning: A uniform -600 volt charge is placed on the photoelectric drum by the primary corona.
    3. Writing: Laser diodes write an invisible electric image on the photoelectric drum by causing the drum surface
    to be less negative wherever the laser beam hits.
    4. Developing: This is where the transfer roller places the toner on the drum. The toner sticks to the areas that
    have had the electric charge lessened due to the laser beam.
    5. Transfer: The secondary corona uses a positive charge to attract the toner from the drum to the paper. The
    paper gets charged by corona too.
    6. Fusing: The toner is then melted into the paper.

    1. Cleaning

    During the first stage of the image formation process, a photosensitive drum's surface is prepared to hold an
    image through a physical and electrical cleaning process. Before a new image is formed on the drum, leftover
    toner from the previous image must be removed. This is accomplished by a rubber-cleaning blade which scrapes
    toner off the drum into a debris cavity. The drum is also electrostatically cleaned by erase lamps which illuminate
    the drum's photosensitive material to neutralize any electrical charges that remain on the drum.

    2. Conditioning

    After the photosensitive drum has been physically and electrically cleaned, it must be conditioned. The
    conditioning process consists of the application of a uniform negative charge on the surface of the photosensitive
    drum by the primary corona wire. A high negative voltage is applied to the primary corona wire by the high
    voltage power supply. Negative charges from the wire migrate to the surface of the drum. The primary corona
    grid is positioned between the primary corona and the drum's surface to regulate the voltage applied to the drum
    so that a uniform negative charge is applied.

    3. Writing

    After rotating past the conditioning station, the drum has a uniform high negative charge on its surface. At the
    writing station, a sweeping laser beam is used to discharge this potential in selected areas by focusing laser light
    on selected portions of the photosensitive drum. This creates what is known as an electrostatic image. This image
    is later developed into a visible image. Portions of the drum not exposed to the laser still have a high negative
    charge.

    4. Developing

    At the developing station, the invisible electrostatic image is developed into a visible image on the photosensitive
    drum when toner from a developer cylinder is transferred to discharged areas on the drum. The toner particles
    acquire a negative charge from the developer cylinder which is connected a negative DC power supply. This
    electrostatic charge causes the toner particles to be attracted to the areas of the drum which have been exposed
    to the laser light and repelled to the areas not exposed. An AC potential is applied to the developer cylinder to
    assist the attraction of the toner from the developer cylinder to the photosensitive drum.

    5. Transfer

    At the transfer station, the toner image on the photosensitive drum is transferred to the paper. A corona wire is
    positioned behind the paper so that the paper, which is traveling the same speed as the drum's surface is
    rotating, contacts the drum. This corona produces a positive charge on the paper. Because the positive charges
    on the paper are stronger, they pull the negatively charged toner particles off the drum and on to the paper. As
    the paper and drum advance, a row of metal teeth with a high negative charge called the static charge eliminator
    weakens the attractive force between the negatively charged drum and the positively charged paper. This helps
    separate the photosensitive drum and paper.

    6. Fusing
    Until the paper reaches the fusing station the toner is held on the paper only by gravity and weak electrostatic
    forces. At the fusing station, toner is melted and forced into the paper by pressure and heat of the fusing roller to
    produce a permanent image. The heat of the fusing roller is maintained by a high intensity lamp inside the fusing
    roller. At this point the finished print is ejected and the process is restarted from stage one.

    You might also like