BIJU PATNAIK UNIVERSITY OF TECHNOLOGY

MECHANICAL ENGINEERING

3rd Semester 4th Semester

Theory Contact Hrs. Credit

Theory Contact Hrs. Credit
L-T-P
L-T-P
BSCM1210 Mathematics - IV 3- 1-0 4
BSCM1205 Mathematics - III 3-1-0 4

PCME4204 Kinematics & 3- 1- 0 4

PCME4201 Fluid Mechanics & 3-1-0 4
Dynamics of Machines
Hydraulic Machine
PCME4202 Mechanics of Solids 3-0-0 3
PCME4205 Engg.Thermodynamics 3- 0- 0 3

PCME4203 Introduction to Physical 3-1-0 4

PCME4206 Basic Manufacturing 3- 0- 0 3
Metallurgy & Engg Materials
Processes

HSSM3204 Engineering Economics 3-0-0 3

HSSM3205Organizational Behaviour 3- 0- 0 3
& Costing
OR
OR
HSSM3204 Engg. Economics & Costing
HSSM3205 Organizational Behaviour

Free Elective-I (any one) 3-0-0 3

BECS2208 Data Base 3-0-0 3
BEEE2215 Energy Conversion Techniques/
Management Systems
PCCE4205 Surveying
(DBMS)
BECS2212 C++ & Object Oriented Programming/
BEEC2216 Analog and Digital Electronics
Theory Credits 21 Theory Credits 20

Practicals/Sessionals Contact Hrs. Credit Practicals/Sessionals Contact Hrs. Credit

PCME7201 Machine Drawing 0-0-3 2 PCME7204 Material Testing 0- 0- 3 2

& Hydraulic Machines Lab
BECS7208 Data Base Management 0-0-3 2
System Lab. PCME7203 Machine Shop and 0- 0- 3 2
PCME7202 Mechanical Engg. Lab 0-0-3 2 Fabrication Practice
OR OR
PCME7203 Machine Shop and PCME7202 Mechanical Engineering Lab
Fabrication Practice
HSSM7203 Communication & Interpersonal 0- 0- 3 2
Skills for Corporate Readiness
Practical/Sessional Credits 6
Practical/Sessional Credits 6
Total Credits 27 Total Credits 26
 BSCM1205 Mathematics - III
Module-I (18 hours)

Partial differential equation of first order, Linear partial differential equation, Non-linear partial
differential equation, Homogenous and non-homogeneous partial differential equation with
constant co-efficient, Cauchy type, Monge’s method, Second order partial differential equation
The vibrating string, the wave equation and its solution, the heat equation and its solution, Two
dimensional wave equation and its solution, Laplace equation in polar, cylindrical and spherical
coordinates, potential.

Module-II (12 hours)

Complex Analysis:
Analytic function, Cauchy-Riemann equations, Laplace equation, Conformal mapping,
Complex integration: Line integral in the complex plane, Cauchy’s integral theorem, Cauchy’s
integral formula, Derivatives of analytic functions

Module –III (10 hours)

Power Series, Taylor’s series, Laurent’s series, Singularities and zeros, Residue integration
method, evaluation of real integrals.

Text books:
1. E. Kreyszig,” Advanced Engineering Mathematics:, Eighth Edition, Wiley India
Reading Chapters: 11,12(except 12.10),13,14,15
2. B.V. Ramana, “ Higher Engineering Mathematics”, McGraw Hill Education, 2008
Reading chapter: 18

Reference books:

1. E.B. Saff, A.D.Snider, “ Fundamental of Complex Analysis”, Third Edition, Pearson

Education, New Delhi
P. V. O’Neil, “Advanced Engineering Mathematics”, CENGAGE Learning, New Delhi
 PCME4201 Fluid Mechanics and Hydraulic Machines
Module I (13 Lectures)
Introduction : Scope of fluid mechanics and its development as a science
Physical property of Fluid: Density, specific gravity, specific weight, specific volume, surface
tension and capillarity, viscosity, compressibility and bulk modulus, Fluid classification.
Fluid statics: Pressure, Pascal’s Law, Pressure variation for incompressible fluid, atmospheric
pressure, absolute pressure, gauge pressure and vacuum pressure, manometer.

Hydrostatic process on submerged surface, force on a horizontal submerged plane surface,

force on a vertical submerged plane surface.
Buoyancy and floatation, Archimedes’ principle, stability of immersed and floating bodies,
determination of metacentric height.

Fluid kinematics : Introduction, description of fluid flow, classification of fluid flow. Reynold’s
number, Acceleration of fluid particles, flow rate and continuity equation, differential equation of
continuity,
Mathematical definitions of irrotational and rotational motion. Circulation, potential function and
stream function. Flow net

Module II (12 Lectures)

Fluid dynamics : Introduction, Euler’s equation along a streamline, energy equation, Bernoulli’s equation
and its application to siphon, venturimeter, orificemeter, pitot tube.
Flow in pipes and ducts: Loss due to friction, Minor energy losses in pipes Hydraulic Gradient Line (HGL),
Total Energy Line (TEL), Power transmission in the fluid flow in pipes, fluid flow in pipes in series and
parallel. Flow through nozzles.

Module III (15 Lectures)

Hydraulic turbine: Classification, Impulse and Reaction turbine; Tangential, Radial and axial turbine.
Impulse turbine, Pelton wheel, bucket dimensions, number of buckets in pelton wheel, efficiency and
performance curves.
Reaction Turbines: Francis turbine and Kaplan turbine, velocity triangle and efficiencies, performance
curve. Function of draft tube and casing cavitation
Centrifugal Pump: constructional features, vane shape, velocity triangles, Efficiencies, Multi stage
centrifugal pumps, Pump Characteristic, NPSH and Cavitation.
Positive displacement pumps: Reciprocating Pump, Working principle, Discharge, work done and power
requirement, Slip, Indicator diagram
Text Books
1. Fluid Mechanics and Hydraulic Machines, Modi & Seth
2. Introduction to Fluid Mechanics and Fluid Machines by S.K. Som and G. Biswas, TMH
3. Fluid Mechanics, A.K.Jain, Khanna Publishers
Reference Books:
1. Fluid Mechanics by A.K. Mohanty, PHI
2. Introduction to Fluid Mechanics by Fox, McDonald, Willey Publications
3. Fluid Mechanics by Kundu, Elsevier
4. An Introduction to Fluid Dynamics by G.K.Batchelor, Cambridge University Press
5. Engineering Fluid Mechanics by Garde et. al., Scitech
6. First course in Fluid Mechanics by Narasimhan, University press
7. Fluid Mechanics by J.F.Douglas, J.M.Gasiorek, J.A.Swaffield and L.B.Jack, Pearson Education
 PCME4202 Mechanics of Solids

MODULE - I (14 Lectures)

1. Load, Stress, Principle of St.Venant, Principle of Superposition, Strain, Hooke’s law, Modulus of Elasticity,
Stress-Strain Diagrams, Working Stress, Factor of safety, Strain energy in tension and compression,
Resilience, Impact loads,
Analysis of Axially Loaded Members : Composite bars in tension and compression - temperature stresses in
composite rods, Statically indeterminate problems.
Shear stress, Complimentary shear stress, Shear strain, Modulus of rigidity, Poisson’s ratio, Bulk Modulus,
Relationship between elastic constants.
2. Members in Biaxial State of Stress :
Stresses in thin cylinders, thin spherical shells under internal pressure - wire winding of thin cylinders.
Analysis of Biaxial Stress. Plane stress, Principal stress, Principal plane, Mohr’s Circle for Biaxial Stress.
3. Strain Deformation :
Two dimensional state of strain, Mohr’s circle for strain, Principal strains and principal axes of strain
measurements, Calculation of principal stresses from principal strains.

MODULE - II (13 Lectures)

4. Shear Force and Bending Moment for Simple Beams :
Shear force and bending moment. Types of load and Types of support. Support reactions, Relationship
between bending moment and shear force, Point of inflection. Shear Force and Bending Moment diagrams.

5. Simple Bending of Beams :

Theory of simple bending of initially straight beams, Bending stresses, Shear stresses in bending,
Distribution of normal and shear stress, beams of two materials, Composite beams.
6. Deflection of Beams :
Differential equation of the elastic line, Slope and deflection of beams by integration method and area -
moment method.

MODULE - III (12 Lectures)

7. Theory of Columns:
Eccentric loading of a short strut, Long columns, Euler’s column formula, Lateral buckling, Critical Load,
Slenderness ratio
8. Torsion in solid and hollow circular shafts, Twisting moment, Strain energy in shear and torsion, strength of
solid and hollow circular shafts. Stresses due to combined bending and torsion, Strength of shafts in
combined bending and twisting.
9. Close - Coiled helical springs.

TEXT BOOKS
1. Elements of Strength of Materials by S.P.Timoshenko and D.H.Young, Affiliated East-West Press
2. Strength of Materials by G. H. Ryder, Macmillan Press
3. Strength of Materials by James M. Gere and Barry J. Goodno, Cengage Learning
REFERENCE BOOKS
1. Mechanics of Materials by Beer and Johnston, Tata McGraw Hill
2. Mechanics of Materials by R.C.Hibbeler, Pearson Education
3. Mechanics of Materials by William F.Riley, Leroy D.Sturges and Don H.Morris, Wiley
Student Edition
4. Mechanics of Materials by James M. Gere, Thomson Learning
5. Engineering Machanics of Solids by Egor P. Popov, Prentice Hall of India
6. Strength of Materials by S.S.Rattan, Tata Mc Graw Hill
7. Strength of Materials by R.Subramaniam, Oxford University Press
8. Strength of Materials by Sadhu Singh, Khanna Publishers

PCME4203 Introduction to Physical Metallurgy and

Engineering Materials
MODULE-I (16 Lectures)
Classification of Engineering Materials, Engineering properties of materials. Characteristic property of
metals, bonding in solids, primary bonds like ionic, covalent and metallic bond, crystal systems,
common crystal structure of metals, representations of planes and directions in crystals, atomic
packing in crystals, calculation of packing density, voids in common crystal structures and
imperfections crystals.

Concept of plastic deformation of metals, critical resolve shear stress, dislocation theory, deformation
by slip and twin, plastic deformation in polycrystalline metals, yield point phenomenon and related
effects, concept of cold working preferred orientation. Annealing ; recovery; recrystalization and grain
growth; hot working.

MODULE-II (16 Lectures)

Concept of alloy formation, types of alloys, solid solutions, factors governing solids solubility
viz. size factor, valency factor, crystal structure factor and chemical affinity factor; order-disorder
transformation.

Binary phase diagrams a) Isomorphism system, (b) Eutectic system, (c) Peritectic system,
(d)Eutectoid system and (e) Peritectoid system. Allotropic transformation. Lever rule and its
application, Interpretation of solidification behaviors and microstructure of different alloys belonging to
those systems, Effect of non-equilibrium cooling, coring and homogenization.
Iron-cementite and iron-graphite phase diagrams, microstructure and properties of different alloys
(alloy steels; stainless steel, tool steel, HSS, high strength low alloy steel) types of cast iron, their
microstructures and typical uses. Specification of steel.

T.T.T. diagram: concept of heat treatment of steels i.e. annealing, normalizing, hardening and
tempering; microstructural effects brought about by these processes and their influences on
mechanical properties; factor affecting hardenability.

MODULE-III (12 Lectures)

 Optical properties of Materials: Scattering, Refraction, Theory of Refraction and absorption, Atomic
Theory of optical properties. Lasers, Optical fibres- Principle, structure, application of optical fibres.
Plastic-: Thermosetting and thermoplastics.
Ceramics: Types, structure, Mechanical properties, application
Composite Materials: Agglomerated Materials: Cermets .Reinforced Materials: Reinforced Concrete.
Glass fiber reinforced plastics, Carbon fibre reinforced plastics, fibre reinforced plastics, Laminated
plastic sheets. Tefnol, Properties of composites, Metal matrix composites, manufacturing procedure
for fiber reinforced composite.
Introduction to Nano-materials

Text Books:
1. Engineering Physical Metallurgy and Heat Treatment by Y.Lakhtin, Mir Publisher, Moscow.
2. Introduction to Physical Metallurgy by Avner, Tata McGraw Hill
3. Materials Science and Engineering by W.D.Callister, Wiley and Sons Inc.
Reference Books
1. Elements of Material Science and Engineering, L.H.Van Vlack, Addison Wesley
2. Physical Metallurgy: Principles and Practice by Ragahvan, PHI
3. The Science and Engineering of Materials by Donald R. Askeland and Pradeep P Phule, Thomson
Learning (India Edition)
4. Materials Science and Engineering by V.Raghavan, Prentice Hall of India Pvt.Ltd.
5. Essentials of Material Science and Engineering by Donald R. Askeland and Pradeep P Phule, Thomson
Learning
6. Processes and Material of manufacture by Lindberg, PHI.
7. Elements of Materials Science & Engineering by Van Vlack, Pearson
8. Mechanical Metallurgy by Dieter, Tata MacGraw Hill
9. Materials Science and Metallurgy By Daniel Yesudian, Scitech
10. Material Science and Metallurgy by C.K.Dutta, Dhanpat Rai
11. Materials Science and Metallurgy by R.B.Choudhary, Khanna Publishers
12. Principles of Engineering Metallurgy by L.Krishna Reddy, New Age International
13. Material Science and Processes by S.K.Hazra Chowdhury, Indian Book distributing Co.
14. Engineering Materials, Properties and Selection by Kenneth G. Budinski and Michael K. Budinski,
Prentice Hall of India
15. Materials Science by M.S. Vijaya , G.Rangarajan, TMH
16. Materials Science by V. Rajendra, A. Marikani, , TMH

HSSM3204 Engineering Economics & Costing

Module-I: (12 hours)

Engineering Economics – Nature and scope, General concepts on micro & macro economics.
The Theory of demand, Demand function, Law of demand and its exceptions, Elasticity of
demand, Law of supply and elasticity of supply. Determination of equilibrium price under perfect
competition (Simple numerical problems to be solved). Theory of production, Law of variable
proportion, Law of returns to scale.

Module-II: (12 hours)

Time value of money – Simple and compound interest, Cash flow diagram, Principle of
economic equivalence. Evaluation of engineering projects – Present worth method, Future worth
method, Annual worth method, internal rate of return method, Cost-benefit analysis in public
projects. Depreciation policy, Depreciation of capital assets, Causes of depreciation, Straight line
method and declining balance method.

Module-III: (12 hours)

Cost concepts, Elements of costs, Preparation of cost sheet, Segregation of costs into fixed and
variable costs. Break-even analysis-Linear approach. (Simple numerical problems to be solved)
Banking: Meaning and functions of commercial banks; functions of Reserve Bank of India.
Overview of Indian Financial system.

Text Books:

1. Riggs, Bedworth and Randhwa, “Engineering Economics”, McGraw Hill Education

India.
2. M.D. Mithani, Principles of Economics.

Reference Books :
1. Sasmita Mishra, “Engineering Economics & Costing “, PHI
2. Sullivan and Wicks, “ Engineering Economy”, Pearson
3. R.Paneer Seelvan, “ Engineering Economics”, PHI
4. Gupta, “ Managerial Economics”, TMH
5. Lal and Srivastav, “ Cost Accounting”, TMH

HSSM 3205 Organizational Behaviour

Module I :
The study of Organizational Behaviour : Defination and Meaning, Why Study OB
Learning – Nature of Learning, How Learning occurs, Learning and OB.
Foundations of Individual Behaviour : Personality – Meaning and Defination, Determinants of
Personality, Personality Traits, Personality and OB.
Perception – Meaning and Definition, Perceptual Process, Importance of Perception in OB. Motivation –
Nature and Importance, Herzberg’s Two Factor Theory, Maslow’s Need Hierarchy Theory, Alderfer’s
ERG Theory, Evaluations.
Module II :
Organizational Behaviour Process : Communication – Importance, Types, Gateways and Barriers to
Communication, Communication as a tool for improving Interpersonal Effectiveness, Groups in
Organizations – Nature, Types, Why do people join groups, Group Cohesiveness and Group Decision-
making Managerial Implications, Effective Team Building. Leadership-Leadership & Management,
Theories of Leadership-Trait theory, Leader Behaviour theory, Contingency Theory, Leadership and
Followership, How to be an effective Leader, Confict-Nature of Conflict and Conflict Resolution. An
Introduction to Transactional Analysis (TA).
Module-III :
Organization : Organizational Culture – Meaning and Definition, Culture and Organizational
Effectiveness. Introduction to Human Resource Management-Selection, Orientation, Training and
Development, Performance Appraisal, Incentives Organizational Change – Importance of Change,
Planned Change and OB techniques. International Organisational Behaviour – Trends in International
Business, Cultural Differences and Similarities, Individual and Interpersonal Behaviour in Global
Perspective.
Text Books :
1. Keith Davis, Organisational Behaviour, McGraw-Hill.
2. K.Aswathappa, Organisational Behaviour, Himalaya Publishing House.
Reference Books :
1. Stephen P. Robbins, Organisational Behaviour, Prentice Hall of India
2. Pradip N. Khandelwal, Organizational Behaviour, McGraw-Hill, New Delhi.
3. Uma Sekaran, “Organizational Behaviour”, TATA McGraw-Hill, New Delhi.
4. Steven L McShane, Mary Ann Von Glinow, Radha R Sharma” Organizational
Behaviour” , TATA McGraw- Hill.
5. D.K. Bhattachayya, “Organizational Behaviour”, Oxford University Press
6. K.B.L.Srivastava & A.K.Samantaray, “Organizational Behaviour” India Tech

BECS2208 Database Management System

Module I : (10 hours)

Database System Architecture - Data Abstraction, Data Independence, Data Definitions and Data Manipulation
Languages. Data models - Entity Relationship(ER), Mapping ER Model to Relational Model, Network .Relational and
Object Oriented Data Models, Integrity Constraints and Data Manipulation Operations.

Module II : (12 hours)

Relation Query Languages, Relational Algebra and Relational Calculus, SQL.
Relational Database Design: Domain and Data dependency, Armstrong's Axioms, Normal Forms, Dependency
Preservation, Lossless design.
Query Processing Strategy.

Module III: (10 hours)

Transaction processing: Recovery and Concurrency Control. Locking and Timestamp based Schedulers.
Database Recovery System: Types of Data Base failure & Types of Database Recovery, Recovery techniques

Text Books:
1. Database System Concepts by Sudarshan, Korth (McGraw-Hill Education )
2. Fundamentals of Database System By Elmasari & Navathe- Pearson Education
References Books:
(1) An introduction to Database System – Bipin Desai, Galgotia Publications
(2) Database System: concept, Design & Application by S.K.Singh (Pearson Education)
(3) Database management system by leon &leon (Vikas publishing House).
(4) Fundamentals of Database Management System – Gillenson, Wiley India
(5) Database Modeling and Design: Logical Design by Toby J. Teorey, Sam S. Lightstone, and Tom
Nadeau, “”, 4th Edition, 2005, Elsevier India Publications, New Delhi
 PCME7201 Machine Drawing
Orthographic and Sectional drawing of Machine components: (Any seven)
Screw threads, Screwed fastenings, Turn Buckle, Keys, Cotter joints and Knuckle joints; Pulley;
Flanged coupling, Pedestal Bearing or Plummer Block.
Fundamentals of AutoCAD (Two classes)
1. Dimension & annotations
2. Use of Layers
3. Working with constraint in dimension
4. Creating assembly
5. Axi-symmetrical parts
6. Creating surface features
7. Working with bill of material
Drawing of the following using AUTOCAD: (Any two)
1. Projection of solids
2. Nut & bolt and Fasteners
3. Cotter joint
4. Expansion joint
5. Shaft coupling
Text Books:
1. Machine Drawing by N.D.Bhatt, V.M.Panchal, Charotar Publishing House.
2. Machine Drawing by N.D.Junarkar, Pearson Education
3. Machine Drawing with AutoCAD by Goutam Pohit and Goutam Ghosh, Pearson
Education
4. Machine Drawing includes AutoCAD by Ajeet Singh, Tata MacGraw Hill

Reference Books:
1. Machine Drawing by K.L.Narayana, P.Kannaiah, K.Venkata Reddy, New Age
International
2. Engineering Drawing and Graphics using AUTOCAD by T.Jayapoovan, Vikas Publishing
3. Engineering Drawing by N.D.Bhatt, Charotar
4. Engineering Drawing and Graphics + AutoCAD by K.Venugopal, New Age International

BECS7208 Database Managements System Lab

1. Use of SQL syntax: insertion, deletion, join, updation using SQL. (1 class)
2. Programs on join statements and SQL queries including where clause. (1 class)
3. Programs on procedures and functions. (1 class)
4. Programs on database triggers. (1 class)
5. Programs on packages. (1 class)
6. Programs on data recovery using check point technique. (1 class)
7. Concurrency control problem using lock operations. (1 class)
8. Programs on ODBC using either VB or VC++. (1 class)
9. Programs on JDBC. (1 class)
10. Programs on embedded SQL using C / C++ as host language. (1 class)
 PCME7202 Mechanical Engineering Lab
Group A
1. Determination of equilibrium of coplanar forces.
2. Determination of Moment of Inertia of Flywheel
3. Determination of tensile strength of materials by Universal Testing Machine.
Group B
4. Determination of Metacentric Height and application to stability of floating bodies.
5. Verification of Bernoulli’s Theorem and its application to Venturimeter.
6. Determination of Cv and Cd of Orifices.
Group C
7. Calibration of Bourdon Tube Pressure gauge and measurement of pressure using manometers.
8. Study of Cut-Sections of 2 stroke and 4 stroke Diesel Engine.
9. Study of Cut-Sections of 2 stroke and 4 stroke Petrol Engine.

PCME7203 Machine Shop and Fabrication Practice

1. A job on lathe with taper turning, thread cutting, knurling and groove cutting
2. Gear cutting (with index head) on milling m/c
3. Working with shaper, planer and slotting m/c
4. Working with surface/ cylindrical grinding
5. TIG/ MIG welding, gas cutting
 BSCM1210 Mathematics – IV

Module-I (20 hours)

Numerical methods:
Approximation and round of errors, Truncation error and Taylor’s series
Roots of equation: The bisection method, the false-position method, fixed point iteration, the
Newton-Raphson method, Muller’s method
Linear algebraic equation: LU decomposition, the matrix inverse, Gauss-Seidel method
Interpolation: Newton divided difference interpolation, Lagrange Interpolation, Newton’s forward
and backward interpolation.
Numerical integration: The trapezoidal rule, The Simpson’s rules, Gauss quadrature
Ordinary differential equation: Euler’s method, Improvement of Euler’s method, Runge-Kutta
methods

Module-II (10 Hours)

Probability:
Probability, Random variables, Probability distributions, Mean and variance of distribution,
Binomial, Poisson and Hypergeometric distributions, Normal distribution, Distribution of several
random variables.

Module-III (10 Hours)

Mathematical Statistics:
Random sampling, Estimation of Parameters, Confidence Intervals, Testing of hypothesis,
Acceptance sampling, Chi square test for goodness of fit , Regression Analysis, Fitting Straight
Lines, Correlation analysis.

Text books:

1. S. C. Chapra and R. P. Canale, “ Numerical methods for Engineers”, Fifth Edition,

McGraw Hill Education
Reading Chapters : 2, 3(3.1, 3.2), 4(4.2, 4.3), 5(5.1, 5.2, 5.3), 6(6.4), 9(9.1, 9.2), 10(10.2),
13(13.1,13.2,13.5), 16(16.1, 16.2), 17(17.3), 20(20.1, 20.2, 20.3)

2. E. Kreyszig,” Advanced Engineering Mathematics:, Eighth Edition, Wiley India

Reading Chapters: 22, 23( except 23.5 and 23.8)

Reference books:

1. Jay L. Devore, “Probability and Statistics for Engineering and Sciences”,

Seventh Edition, Thomson/CENGAGE Learning India Pvt. Ltd
P. V.O’Neil, “Advanced Engineering Mathematics”, CENGAGE Learning, New Delhi
 PCME4204 Kinematics and Dynamics of Machines
Module - I (13Lectures)
1. Mechanisms : Basic Kinematic concepts and definitions, Mechanism, Link, Kinematic Pair, Classification of
kinematic pairs, Degrees of freedom, Kinematic chain, Binary Ternary and Quaternary joints and links,
Degrees of freedom for plane mechanism, Gruebler’s criterion, Inversion of mechanism, Four bar chains
and their inversions, Single slider crank chain, Double slider crank chain and their inversion.
2. Kinematic Analysis : Determination of velocity using graphical and analytical techniques, Instantaneous
centre method, Relative velocity method, Kennedy theorem, Velocity in four bar mechanism, Slider crank
mechanism, Rubbing velocity at a Pin-joint.
Acceleration Diagram for a slider - crank mechanism, Corioli’s component of acceleration and its
application.

Module - III (14 Lectures)

3. Inertia forces in reciprocating Parts : Velocity and acceleration of piston by analytical method, Angular
velocity and angular acceleration of connecting rod by analytical method and by graphical method, Piston
effort, force acting along the connecting rod, Crank effort, Turning moment on crank - shaft.
4. Dynamically equivalent system, compound Pendulum, correction couple.
Turning moment diagrams for different types of engines, Fluctuation of energy and fluctuation of speed.
4. Friction of a screw and nut, Square threaded screw, V-threaded screw, Pivot and collar friction, friction
circle, Friction axis, Friction clutches, Transmission of power by single plate, mutiplate and cone
clutches.

Module - III (13Lectures)

6. Brakes & Dynamometers : Classification of brakes, Analysis of simple block, Band and internal expanding
shoe brake, Braking of a vehicle.
Absorption and transmission dynamometers, Prony brake, Rope brake, Band brake dynamometer, Belt
transmission dynamometer, Torsion dynamometer.
7. Gear Trains : Simple Train, Compound train, Reverted train, Epicyclic train and their applications.
8. Belt, rope and chain drives, Initial tension, Effect of centrifugal tension on power transmission, Maximum
power transmission capacity, Belt creep and slip.
Text Books
1. Theory of Machines by Thomas Bevan, CBS Publications
2. Theory of Machines by S.S.Rattan, Tata MacGraw Hill
Reference
1. Kinematics and Dynamics of Machinery by Charles E. Wilson and J.Peter Saddler, Pearson Education
2. Theory of Machines and Mechanisms (India Edition) by John J. Uicker Jr., Gordon R. Pennock and
Joseph E. Shigley, Oxford University Press
3. Theory of Machines and Mechanisms by P.L.Ballaney, Khanna Publishers
4. Mechanism and Machine Theory by J.S.Rao and R.V.Dukipatti, New Age International
5. Theory of Mechanisms and Machines by C.S.Sharma and K.Purohit, Prentice Hall of India
6. Theory of Machines by R.S.Khurmi and J.K.Gupta, S.Chand Publication
7. Theory of Machines by Shah Jadwani, Dhanpat Rai
8. A Textbook of Theory of Machines by R. K. Bansal, Laxmi Publication
9. Theory of Machines by Abdulla Shariff, Dhanpat Rai Publishers
10. Theory of Machines by Sadhu Singh, Pearson Education
 PCME4205 Engineering Thermodynamics
Module-I (13 Lectures)
1. Review of First and Second laws:
First law analysis of unsteady flow control volumes, Entropy generation, Reversible work, Availability, and
Irreversibility.
2. General Thermodynamic property relations:
The Maxwell relations, The Clapeyron equation, The TdS relations, Isothermal compressibility and volume
expansivity, The Joule-Thomson coefficient.
3. Reciprocating Air Compressors:
Introduction (Uses of compressed air), The reciprocating cycle neglecting and considering clearance
volume, Volumetric efficiency and its effect on compressor performance, Limitations of single stage
compression, Multistage compression and intercooling, Optimum intercooler pressure, Performance and
design calculations of reciprocating compressors, Air motors.
Module- II (10 Lectures)
4. Vapor Power Cycles:
The Carnot vapor cycle and its limitations, The Rankine cycle, Means of increasing the Rankine cycle
efficiency, The reheat cycle, The regenerative feed heating cycle, The binary vapor cycle, The gas-vapor
coupled cycles, Cogeneration (Back pressure and Pass-out turbines).
Module- III (12 Lectures)
4. Gas Power Cycles:
Air standard cycles- Otto, Diesel, Dual Combustion and Brayton cycles, The Brayton cycle with non-
isentropic flow in compressors and turbines, The Brayton cycle with regeneration, reheating and
intercooling, Ideal jet propulsion cycle.
5. Refrigeration cycles:
Reversed Carnot cycle, Reversed Brayton cycle (Gas refrigeration system), The vapor compression cycle,
The vapor absorption cycle.

Text Books
1. Engineering Thermodynamics by P. K. Nag, Publisher:TMH
2. Fundamentals of Thermodynamics by Sonntag, Borgnakke, Van Wylen, John Wiley & Sons
3. Fundamentals of Engineering Thermodynamics by E. Rathakrishnan, PHI
Reference
1. Engineering Thermodynamics by M.Achyuthan, PHI
2. Engineering Thermodynamics by Y.V.C. Rao, University Press
3. Steam Tables in SI Units by Ramalingam, Scitech
4. Steam Tables by C.P.Kothandaraman, New Age International
5. Thermodynamics and Thermal Engineering by Kothandaraman & Domkundwar, Dhanpat Rai
6. Applied Thermodynamics by P.L.Ballaney, Khanna Publishers
7. Fluid Mechanics by J.F.Douglas, J.M.Gasiorek, J.A.Swaffield and L.B.Jack, Pearson Education.
 PCME4206 Basic Manufacturing Process
Module - I (12 Lectures)
1. Foundry :
(a) Types of patterns, pattern materials and pattern allowances.
(b) Molding Materials - sand molding, metal molding, investment molding, shell molding.
(c) Composition of molding sand, Silica sand, Zircon sand, binders, additives, Binders - clay, binders for
CO2 sand, binder for shell molding, binders for core sand.
(d) Properties of molding sand and sand testing.
(e) Melting furnaces - cupola, resistance furnace, induction and arc furnace.
(f) Solidification of castings, design of risers and runners, feeding distance, centre line freezing resistance
chills and chaplets.
(g) Degasification and inoculation of metals.
(h) Casting methods like continuous casting, centrifugal casting, disc casting.
(i) Casting defects.

Module – II (12 Lectures)

2. Welding and cutting: Introduction to gas welding, cutting, Arc welding and equipment’s. TIG (GTAW) and
MIG (GMAW) welding, resistance welding and Thermit welding. Weldablity
Modern Welding methods like plasma Arc, Laser Beam, Electron Beam, Ultrasonic, Explosive and friction
Welding, edge preparation in butt welding.
Brazing and soldering, welding defects.
Destructive and non-destructive testing of castings and welding.
3. Brief introduction to powder metallurgy processes.

Module – III (14 Lectures)

4. Plastic deformation of metals: Variables in metal forming and their optimization. Dependence of stress
strain diagram on Strain rate and temperature. Hot and cold working of metals, classification of metal
forming processes.
5. Rolling: Pressure and Forces in rolling, types of rolling mills, Rolling defects.
6. Forging: Smith Forging, Drop and Press forging, M/c forging, Forging defects.
7. Extrusions: Direct, Indirect, Impact and Hydrostatic extrusion and their applications, Extrusion of tubes.
8. Wire drawing methods and variables in wire-drawing, Optimum dies shape for extrusion and drawing.
9. Brief introduction to sheet metal working: Bending, Forming and Deep drawing, shearing.
10. Brief introduction to explosive forming, coating and deposition methods.

Text Books
1. Manufacturing technology - by P.N.Rao, Tata McGraw Hill publication.
2. Welding Technology by R.A. Little, TMH
3. Manufacturing Science by A.Ghosh and A K Malick, EWP
Reference Books
1. Fundamentals of metal casting technology by P.C. Mukherjee, Oxford PIBI.
2. Mechanical Metallurgy by Dieter, Mc-Graw Hill
3. Processes and Materials of Manufacture by R.A Lindberg, Prentice hall (India)
4. A Text Book of Production Engineering by P.C.Sharma, S.Chand
 BEEE2215 Energy Conversion Techniques

MODULE- I (10 Hrs)

1. DC GENERATORS: Constructional features and operating principles, EMF equation, No
Load Characteristics for Separately Excited DC Generator and DC Shunt Generator,
Conditions for Self Excitation, Critical Resistance and Critical Speed, Losses and
Efficiency.
2. DC MOTORS: Speed~Armature Current, Torque~Armature Current and Speed~Torque
Characteristic for (i) Separately Excited DC Motor, (ii) DC Shunt Motor, (iii) DC Series
Motor, Starting, Speed control and application of DC motor.

MODULE- II (10 Hrs)

3. SINGLE PHASE TRANSFORMERS: Constructional Features, EMF Equation, Turns
Ratio, Open Circuit Test and Short Circuit Test, Losses and Efficiency, Introduction to
Three Phase Transformers: Three Single Phase Transformers Connected as a Bank
of Three Phase Transformer.
4. INDUCTION MOTORS: (a) Three Phase Induction Motors: Constructional
Features of Squirrel Cage Rotor type and Slip Ring/Wound Rotor type of Induction
Motors, Principle of Operation, Concept of Slip, Slip~Torque Characteristics, Starting
of Squirrel Cage Rotor type and Slip Ring/Wound Rotor type of Induction Motors,
Speed Control of Induction Motors.
(b) Introduction to Single Phase Induction Motors: Construction, Principle of
Operation and Application.

MODULE- III (10 Hrs)

5. THREE PHASE SYNCHRONOUS GENERATORS: Constructional Features, Principle of
operation as Alternator, Synchronous reactance, Equivalent circuit of alternator,
Power-Angle curve, Synchronization of alternators.

6. THREE PHASE SYNCHRONOUS MOTORS: Constructional Features, Principle of

Operation, Torque Expression and Phasor Diagram for Synchronous Motor, Electrical
Power and Mechanical Power, Starting and application of Synchronous Motor.

Text Book :
1. Electric Machines – D P Kothari & I J Nagrath – Tata McGraw Hill.
Reference Book(s):
2. The Performance and Design of DC Machines – A E Clayton.
3. Theory and Performance of AC Machines – M G Say
4. Electrical Machinery – P S Bimbhra – Khanna Publishers.
5. Electrical Machines – P K Mukherjee and S Chakravorti – Dhanpat Rai
Publications.
6. Electric Machinery – Fitzgerald, Charles Kingsley Jr., S. D. Umans – Tata Mc
Graw Hill.
7. Electric Machinery And Transformers – Guru & Hiziroglu – Oxford University
Press.
8. Electric Machines – Charles Hubert – Pearson Education.
 .

PCCE4205 Surveying
Module I

Linear measurement and chain survey: Use of various types of chains and tapes, measurement of correct
length of lines, direct and indirect ranging, chaining along sloping ground. Obstacle in chaining, errors and
their elimination.

Compass surveying: Use of prismatic compass, temporary adjustment, bearing of a line, local attractions,
correction of bearing

Plane table surveying: Methods of plane tabling, radiations, intersection, traversing and resection, two
point and three point problem. Adjustment and common error in plane table survey.

Module II

Levelling: Use of dumpy level and levelling staff. Temporary and Permanent adjustment of dumpy level,
Reduction of levels by height of instrument and rise and fall method. Curvature and refraction error,
sensitiveness of level tube, reciprocal levelling, levelling difficulties and common errors

Module III

Contouring: Contour interval and horizontal equivalent, characteristics of contours, methods of

contouring- different and indirect method, contour gradient

Theodolite Survey: Use of theodolite, temporary adjustment, measuring horizontal and vertical angles,
theodolite traversing

TEXT BOOKS:

1. Surveying and Levelling Vol-1, T. P. Kanetkar and S. V. Kulkarni

2. Surveying- Vol-1, B.C. Punmia
3. Surveying Vol01 by R Agor

BECS2212 C++ and Object Oriented Programming

Module I (08 hrs)

Introduction to object oriented programming, user defined types, structures, unions,
polymorphism, encapsulation. Getting started with C++ syntax, data-type, variables, strings,
functions, default values in functions, recursion, namespaces, operators, flow control, arrays and
pointers.

Module II (16 hrs)

Abstraction mechanism: Classes, private, public, constructors, destructors, member data,
member functions, inline function, friend functions, static members, and references.
Inheritance: Class hierarchy, derived classes, single inheritance, multiple, multilevel, hybrid
inheritance, role of virtual base class, constructor and destructor execution, base initialization
using derived class constructors.
Polymorphism: Binding, Static binding, Dynamic binding, Static polymorphism: Function
Overloading, Ambiguity in function overloading, Dynamic polymorphism: Base class pointer,
object slicing, late binding, method overriding with virtual functions, pure virtual functions,
abstract classes.
Operator Overloading: This pointer, applications of this pointer, Operator function, member and
non member operator function, operator overloading, I/O operators.
Exception handling: Try, throw, and catch, exceptions and derived classes, function exception
declaration.

Module III (08 hrs)

Dynamic memory management, new and delete operators, object copying, copy constructor,
assignment operator, virtual destructor.
Template: template classes, template functions.
Namespaces: user defined namespaces, namespaces provided by library.

Text Books:
1. Object Oriented Programming with C++ - E. Balagurusamy, McGraw-Hill Education
(India)
2. ANSI and Turbo C++ - Ashoke N. Kamthane, Pearson Education

Reference Books:

1. Big C++ - Wiley India

2. C++: The Complete Reference- Schildt, McGraw-Hill Education (India)
3. “C++ and Object Oriented Programming” – Jana, PHI Learning.
4. “Object Oriented Programming with C++ “- Rajiv Sahay, Oxford
5. Mastering C++ - Venugopal, McGraw-Hill Education (India)
“Object Oriented Programming with C++”, David Parsons, Cengage Learning.
 BEEC2216 Analog and Digital Electronics

MODULE – I (9 Hours)
1. Diode Circuits: Zener Diode Voltage Regulator, Diode Circuits with Time-Varying Sources,
Switching Characteristics of a Diode, Special Purpose Diodes , Rectifiers and Filters. (4 Hours)

2. Small Signal Amplifier: Transistor Hybrid Model, Transistor Biasing, Bias Design, AC Gain, Input
and Output Impedances, Some Special Circuits, Darlington Pairs and Feedback Pairs, Frequency
Response of Single Stage RC Coupled Amplifiers and Multistage Transistor Amplifiers. (5 Hours)
MODULE – II (12 Hours)
3. Large Signal Amplifiers: Classification, Class-A and Class-B Power Amplifiers Complimentary
and Symmetry Amplifiers, Class-C Amplifiers. . (4 Hours)
4. Feed Back Amplifiers and Oscillators: Feedback Concepts, Types of Feedback Circuits, Effects of
Negative Feedback Circuits, Unijunction Oscillator and PLL. (4 Hours)
5. Operational Amplifier: Basic Operational Amplifier, Differential Amplifier, Basic Operational
Amplifier Circuits, Application of OPAMPs, Linear Application of OPAMPs, OPAMP Filters.
(4 Hours)
MODULE – III (13 Hours)
6. Conditional Circuits: Introduction to Digital Electronics Circuits, K-maps and their Simplification,
Adder, Subtractors, Digital Comparator Circuits, Parity Checkers/Generators, Multiplexers and
Decoders, Demultiplexers/Decoders, Programmable Logic Arrays. (5
Hours)
7. Sequential Circuits and Systems: Introduction, Memory Cells and Flip-Flops, Resistors, Counters,
Asynchronous Counters, State Diagrams, Memories, ROM and RAM, Digital to Analog and Analog
to Digital Converters (DAC and ADC ). (5 Hours)
8. Multivibrators and Switching Regulators: Multivibrators, Analog Multivibrators, 555 Timer,
Power Supply and Regulators (3 Hours)
Text Books:
1. Electronics: Analog and Digital, I.J. Nagrath (Selected portions of Chapter 1, 3, 4, 5, 6, 7, 9, 10, 11),
PHI Learning Pvt. Ltd., New Delhi.
Reference Books:
1. Millman’s Electronic Devices and Circuits, 2nd Edition, J. Millman, C. Halkias, and S. Jit, Tata
McGraw Hill Education Pvt. Ltd., New Delhi.
2. Electronic Devices and Circuit Theory, 9th/10th Edition, R.L. Boylestad and L. Nashelsky, Pearson
Education, New Delhi.
3. Digital Fundamentals, 5th Edition, T.L. Floyd and R.P. Jain, Pearson Education, New Delhi.
4. Fundamentals of Digital Circuits, 2nd Edition, A. Anand Kumar, PHI Learning Pvt. Ltd., New Delhi.
PCME7204 Material Testing and Hydraulic Machines Lab
Material Testing :

1. Impact strength
2. Hardness strength
3. Rigidity modulus
4. Compression / Bending strength
5. Fatigue strength

Hydraulic Machines :
1. Experiments on impact of Jets
2. Experiments on performance of reciprocating pump
3. Experiments on performance of centrifugal pump
4. Experiments on performance of Pelton Turbine
5. Experiments on performance of Francis Turbine
6. Experiments on performance of Kaplan Turbine
HSSM7203 Communication & Interpersonal skills for
Corporate Readiness Lab.

Lab 30 hours

This course will focus on communication in professional (work-related) situations of the kind that
BPUT graduates may expect to encounter on entering the professional domain.
Some typical forms of work-related communication, oral or written, are listed below. Practice
activities for all four skills can be designed around these or similar situations.

1. Gaining entry into an organization

i. Preparing job-applications and CVs

ii. Facing an interview
iii. Participating in group discussion (as part of the recruitment
process)
2 In-house communication

a. Superior/ Senior Î subordinate / junior (individual Î individual / group)

i. Welcoming new entrants to the organization, introducing the workplace culture
etc.
ii. Briefing subordinates / juniors : explaining duties and responsibilities etc.
ii. Motivating subordinates / juniors (‘pep talk’)
iii. Instructing/ directing subordinates/ juniors
iv. Expressing / recording appreciation, praising / rewarding a subordinate or junior
v Reprimanding / correcting / disciplining a subordinate/junior (for a lapse) ; asking
for an explanation etc.

b. Subordinate / Junior Î Superior / Senior

i. Responding to the above
ii. Reporting problems / difficulties / deficiencies
iii. Offering suggestions

************************
 BIJU PATNAIK UNIVERSITY OF TECHNOLOGY,
ORISSA
MECHANICAL ENGINEERING
5th SEMESTER 6th SEMESTER
THEORY Contact THEORY Contact
Hours Hours

Code Subject L-T-P Credits Code Subject L-T-P Credit

s
PCME4301 Machine Dynamics 3-0-0 3 HSSM3302 Optimization in Engineering 3-0-0 3
PCME4303 Design of Machine Elements 3-0-0 3 PCME4307 Advanced Mechanics of Solids 3-0-0 3
PCME4304 Machining Science & Technology 3-0-0 3 PCME4306 Mechanical Systems Design 3-0-0 3

PCME4302 I.C. Engines & Gas Turbines 3-0-0 3 PCME4305 Heat Transfer 3-0-0 3
Professional Elective – I (Any one) 3-0-0 3 Professional Elective – I (Any one) 3-0-0 3
PEME5301 Automobile Engineering PEME5305 Robotics & Robot Applications
PEME5302 CAD & CAM PEME5306 Modern Manufacturing Processes
PEME5304 Tribology PEME5307 Computer Integrated Manufacturing
PEME5303 Rapid Prototyping PEME5308 Flexible Manufacturing Systems
PEME5309 Non Conventional Energy Sources

Free Elective – I (Any One) 3-0-0 3 Free Elective – II (Any One) 3-0-0 3
FESM6302 Advance Numerical Methods FEME6301 Finite Element Method
PCEC4301 Microprocessors PCEC4304 Digital Signal Processing Internet
FEME6302 Project Management PCIT4301 and web technology.
PCBM4301 Elements of Biomedical PECS5303 Pattern Recognition
Instrumentation/ PEIT5301 Ecommerce & ERP
PCIT4303 Java Programming.
Credits (Theory) 18 Credits (Theory) 18

PRACTICALS/SESSIONALS PRACTICALS/SESSIONALS
PCME7302 Production Lab & IC Engines Lab. 0-0-3 2 PCME7305 Heat Transfer & Heat Power Lab . 0-0-3 2

PCME7301 Machine Dynamics & Heat Power Lab 0-0-3 2 PCME7307 Numerical Computation & Solids Modeling Lab 0-0-3 2

PCME7303 Machine Design Project - I 0-0-3 2 PCME7306 Machine Design Project - II 0-0-3 2

Credits (Practicals / Sessionals) 6 Credits (Practicals/Sessionals) 6

TOTAL SEMESTER CREDITS 24 TOTAL SEMESTER CREDITS 24

TOTAL CUMULATIVE CREDITS 133 TOTAL CUMULATIVE CREDITS 157

 PCME4301 MACHINE DYNAMICS (3-0-0)
Module – I (12 hours)
1. Mechanisms with lower pairs : Motor Vehicle Steering Gears - Davis Steering Gear &
Ackermann Steering Gear, Hooke’s Joint.
2. Gyroscope : Concept on Gyroscopic Couple for Plane Disc & Two-bladed airscrew,
Effect of Gyroscopic Couple on Ships & Aeroplanes, Stability of Two Wheelers and
Four Wheelers. Analysis on bearing reactions due to Forced Precession of Rotating
Disc mounted on Shafts, Introduction on Gyroscopic Stabilisation.
3. Toothed gears : : Gear terminology, law of gearing , Theory of shape and action of
tooth properties and methods of generation of standard tooth profiles, Standard
proportions, Path of contact, Arc of contact, Contact ratio, Interference and Under –
Cutting, Methods for eliminating Interference, Minimum number of teeth to avoid
interference.
Module II (12 hours)
4. Cams : Types of cams, Types of followers, Types of follower motions - Simple
Harmonic, Uniform Velocity and Constant Acceleration & Retardation Types, Analysis
for Displacement, velocity and Acceleration of Follower, Generation of Cam Profiles by
Graphical Method, Introduction on Cams with specified contours.
5. Governors : Centrifugal Governors - Watt, Porter, Proell and Spring Loaded Governor
of Hartnell type, Controlling Force & Controlling Force Curve, Sensitiveness, Stability,
Isochronism, Hunting, Governor Effort and Power, Effect of Friction & Coefficient of
insensitiveness.
6. Dynamics of Machines : Dynamic Force Analysis of Four-Bar Mechanism and Slider
Crank Mechanism. using D’Alemberts Principle, Flywheel and Determination of its
size from Turning Moment Diagram & Maximum Fluctuation of Energy.
Module III (12 hours)
7. Balancing : Static and Dynamic Balancing, Balancing of Single Rotating Mass by
Balancing Masses in Same plane and in Different planes. Balancing of Several
Rotating Masses rotating in Same plane and in Different planes. Effect of Inertia Force
due to Reciprocating Mass on Engine Frame, Partial balance of single cylinder
engines. Primary and Secondary Balance of Multi-cylinder In-line Engines. Direct and
Reverse Crank method of balancing for radial engines.
8. Vibrations: Introduction to Mechanical Vibration – Longitudinal, Torsional &
Transverse Systems, Concept on Degrees of Freedom. Free and Forced Vibration of
Un-damped and Damped Single Degree Freedom Systems, Vibration isolation and
transmissibility, Whirling of shafts and Evaluation of Critical Speeds of shafts..
Text Books
1. Theory of Machines by Thomas Bevan, CBS Publications
2. Theory of Machines by S.S.Rattan, Tata MacGraw Hill
3. Theory of Mechanisms and Machines by A.. Ghosh and A.. K.. Mallik, EWP
Reference
1. Kinematics & Dynamics of Machinery-Charles E. Wilson & J.Peter Saddler,Pearson Ed.
2. Theory of Machines and Mechanisms (India Edition) by John J. Uicker Jr., Gordon R. Pennock
and Joseph E. Shigley, Oxford University Press
3. Kinematics and Dynamics of Machinery by R.L.Norton, Tata MacGraw Hill
4. Theory of Machines and Mechanisms by P.L.Ballaney, Khanna Publishers
5. Mechanism and Machine Theory by J.S.Rao and R.V.Dukipatti, New Age International
6. Theory of Mechanisms and Machines by C.S.Sharma and K.Purohit, PHI
6. Theory of Machines by R.S.Khurmi and J.K.Gupta, S.Chand Publication
7. Theory of Machines by Shah Jadwani, Dhanpat Rai
8. A Textbook of Theory of Machines by R. K. Bansal, Laxmi Publication
9. Theory of Machines by Abdulla Shariff, Dhanpat Rai Publishers
10. Theory of Machines by Sadhu Singh, Pearson Education.
 PCME4303 DESIGN OF MACHINE ELEMENTS (3-0-0)
[Only specified data book as mentioned in the syllabus is permitted during examination]

Module-I (12 hours)

Stages in design, Standardization, Interchangeability, Preferred numbers, Fits and
Tolerances, Engineering materials, Ferrous, Non-ferrous, Non-metals, Indian standard
specifications for Ferrous materials, Fundamentals of Machine Design, Allowable
stress, Factor of safety, Use of Code/Data books.
Design of Joints: Riveted joints, Boiler joints, Welded and bolted joints based on
different types of loading. Illustrative problems with solutions.
Module-II (14 hours)
Design of Cotter joints with socket and spigot, with a Gib. Design of knuckle joint.
Illustrative problems with solutions.
Design of shafts, solid and hollow based on strength and on rigidity. Illustrative
problems with solutions.
Design of keys and pins, Suck key, Feather key, Taper pin. Illustrative problems with
solutions.
Design of shaft couplings : Rigid Flange coupling, Flexible Flange coupling.
Module-III (14 hours)
Design of circular section, Helical springs, Tension and compression types, Design of
leaf springs: Cantilever and semi-elliptical types. Illustrative problems with solutions.
Levers, classification, Design of Foot levers, Hand lever, Cranked lever, Lever of lever
loaded – safety - valve. Design of belt and pulley Power screw design with square
thread, such as screw jack. Illustrative problems with solutions.

TEXT BOOKS:
1. Mechanical Engineerng Design, J.E.Shigley, C.R.Mischke, R.G.Budynas and K.J.Nisbett,
TMH
2. Machine Design, P.Kanaiah, Scietech Publications
REFERENCE BOOKS:
1. Design of Machine Elements, V.B. Bhandari, Tata McGraw Hill Publishing Company Ltd.,
New Delhi, 2nd Edition 2007.
2. Machine Design, P.C.Sharma and D.K.Agrawal, S.K.Kataria & Sons
3. Machine Design, Pandya and Shah, Charotar Book Stall
4. Machine Design, Robert L. Norton, Pearson Education Asia, 2001.
5. Machine Design, A CAD Approach: Andrew D Dimarogonas, John Wiley Sons, Inc, 2001.
6. Fundamentals of Machine Component Design, Robert C. Juvinall and Kurt M Marshek,
Wiley India Pvt. Ltd., New Delhi, 3rd Edition, 2007
7. A Text Book of Machine Design, R.S.Khurmi and J.K.Gupta, S.Chand Publication
8. Machine Design, H.Timothy and P.E.Wentzell, Cengage Learning
9. Computer Aided Analysis and Design, S.P.Regalla, I.K.International Publishing
DESIGN DATA HAND BOOKS:
1. P.S.G.Design Data Hand Book, PSG College of Tech Coimbature
2. Design Data Hand Book, K. Lingaiah, McGraw Hill, 2nd Ed. 2003.
PCME4304 MACHINING SCIENCE & TECHNOLOGY (3-0-0)
Module – I (13 hours)
Geometry of cutting tools in ASA and ORS, Effect of Geometrical parameters on cutting
force and surface finish, Mechanics of chip formation, Merchant’s theory, Force
relationship and velocity relationship, Cutting tool materials, Types of Tool Wear: Flank
wear, Crater wear, Wear measurement, Cutting fluid and its effect; Machinability
Criteria, Tool life and Taylor's equation, Effect of variables on tool life and surface finish,
Measurement of cutting force, Lathe tool dynamometer, Drill tool dynamometer.
Economics of machining.
Module – II (13 hours)
Conventional machining process and machine tools – Turning, Drilling, Shaping,
Planning, Milling, Grinding. Machine tools used for these processes, their specifications
and various techniques used.

Principles of machine tools : Kinematics of machine tools, speed transmission from

motor to spindle , speed reversal mechanism, mechanism for feed motion, Tool holding
and job holding methods in different Machine tools, Types of surface generated,
Indexing mechanism and thread cutting mechanism, Quick return mechanism,.

Production Machine tools – Capstan and turret lathes, single spindle and multi spindle
semiautomatics, Gear shaper and Gear hobbing machines, Copying lathe and transfer
machine

Module – III (10 hours)

Non-traditional Machining processes :
Ultrasonic Machining, Laser Beam Machining, Plasma Arc Machining, Electro Chemical
Machining, Electro Discharge Machining, Wire EDM , Abrasive Jet Machining

Text Books :
1. Fundamentals of Machining and Machine Tools, G.Boothroyd and W.A.Knight, CRC Press
2. Metal Cutting Principles, M.C.Shaw, Oxford University Press
3. Metal Cutting Theory and Practice, A.Bhattacharya, Central Book Publishers

Reference Books :
1. Manufacturing Technology – by P.N.Rao, Tata McGraw Hill publication.
2. Modern Manufacturing Processes, P.C.Pandey, H.S.Shan, Tata McGraw Hill
3. Manufacturing Science, Ghosh and Mallik, East West Press.
4. Metal Cutting Theory and Practice, D.A.Stephenson and J.S.Agapiou, CRC Press
5. Machining Technology; Machine Tools and Operation, H.A.Youssef and H. El-Hofy, CRC
Press
6. Machine Tools and Manufacturing Technology, Krar, Rapisarda and Check, Cengage
Learning
7. Technology of Machine Tools, Krar, Gill and Smidt, Tata McGraw Hill
8. Principles of Metal Cutting, G.Kuppuswamy, Universities Press
9. Metal Cutting and Machne Tools, G.T.Reddy, Scitech
10. Fundamentals of tool Engineering Design, S.K.Basu, S.K.Mukherjee, R. Mishra , Oxford &
IBH Pub Co.
11. Machine Tools, R.N.Datta, New Central Book Agency
 PCME4302 IC ENGINES & GAS TURBINES (3-0-0)
Module - I (11 hours)
Introduction :
Classification, Engine nomenclature, engine operating and performance parameters,
Valve timing diagram of SI & CI Engines, Comparison of SI and CI engine.
Modern developments in IC Engines, EGR, MPFI, CRDI, GDI, HCCI, dual fuel engine,
Lean burn engine, Stratified engine (basic principles).
Thermodynamic Analysis of cycles :
Significance of Fuel-Air & Actual cycles of I.C. engines. Comparison with Air Standard
Cycles. Analysis of Fuel-Air & Actual cycles (Effect of chemical equilibrium and variable
specific heats. Effect of air fuel ratio and exhaust gas dilution. Time Loss Factor, Heat
Loss Factor, Exhaust Blow down, Loss Due to Gas Exchange Processes, Volumetric
Efficiency, Loss due to Rubbing Friction)
Fuels :Fuels of SI and CI engine, Fuel additives, Properties, potential and advantages
of alternative liquid and gaseous fuels for SI and CI engines (biofuels, LPG and CNG)
Fuel Induction Techniques in IC engines :
Fuel induction techniques in SI and CI engines, Mixture Requirements at Different Loads
and Speeds.
Carburetion: Factors Affecting Carburetion, Principle of Carburetion, Simple Carburetor
and its drawbacks, Calculation of the Air–Fuel Ratio, Modern Carburetors.

Module II (15 hours)

Fuel Injection:Functional Requirements of an Injection System, Classification of
Injection Systems, Fuel Feed Pump, Injection Pump, Injection Pump Governor,
Mechanical Governor, Pneumatic Governor, Fuel Injector, Nozzle, Injection in SI Engine,
Electronic Injection Systems Multi-Point Fuel Injection (MPFI) System, Functional
Divisions of MPFI System, Injection Timing, Group Gasoline Injection System, Electronic
Diesel Injection System.
Ignition :Energy requirement for ignition, requirements of an ignition system,
conventional ignition systems, modern ignition systems (TCI and CDI), firing order,
Ignition timing, Spark advance mechanism,
Combustion : Stages of combustion in SI and CI engines, effects of engine variables
on flame propagation and ignition delay, Abnormal combustion, Preignition &
Detonation, Theory of Detonation. Effect of engine variables on Detonation, control of
Detonation. Diesel Knock & methods to control diesel knock, Requirements of
combustion chambers. Features of different types of combustion chambers system for
S.I. engine. (I-head, F-head combustion chambers), C.I. engine combustion chambers -
Open and divided type, Air swirl turbulence-M. type combustion chamber. Comparison
of various types of combustion chambers.
Super Charging & Scavenging :Thermodynamics Cycles of supercharging. Effect of
supercharging, Efficiency of supercharged engines. Methods of super charging,
supercharging and scavenging of 2-stroke engines.

Module-III (14 hours)

Testing and Performances : Power, fuel & air measurement methods, Performance
characteristic curves of SI & CI engines, variables affecting performance and methods
to improve engine performance.
Cooling & Lubricating Systems, Engine Emission & Controls : Air cooling & water
cooling systems, Effect of cooling on power output & efficiency, Properties of lubricants
and different types of lubricating system.
Engine Emission and control :
Mechanism of pollutant formation and its harmful effects. Methods of measuring
pollutants and control of engine emission.
Gas Turbines : Introduction, Open and closed cycle gas turbines, Analysis of practical
gas turbine cycle.
Air Craft Propulsion : Analysis of Turbo Jet, Turbo Prop, Turbo fan & Ram jet engines.
Axial Flow & Centrifugal Compressor : Basic construction of centrifugal and axial
flow compressor, Velocity diagram, performance characteristics of centrifugal and axial
flow compressor, effects of slip, surging and stalling on compressor.

Text Books:
1. Internal Combustion Engines, V. Ganesan, TMH, 3rd edition
2. Gas Turbines, V.Ganesan, TMH, 3rd edition
Reference books:
1. IC Engines, Mathur & Sharma
2. Fundamentals IC Engines, J.B.Heywood, McGraw Hill
3. A course in IC Engines, V.M.Domkundwar, Dhanpat rai and sons
4. Gas Turbines, Cohen and Roser
5. An Introduction to Energy Conversion, Vol.III, V.Kadambi and Manohar Prasad, New Age
International
6. Fundamentals of Internal Combustion Engines, H.N.Gupta, PHI
7. Internal Combustion Engines, K.K.Ramalngam, Scitech Publications

Professional Elective-I
PEME5301 AUTOMOBILE ENGINEERING (3-0-0)
Module I (14 hours)
Introduction
Main units of automobile chassis and body, different systems of the automobile,
description of the main parts of the engine, motor vehicle act.
Power for Propulsion
Resistance to motion, rolling resistance, air resistance, gradient resistance, power
required for propulsion, tractive effort and traction, road performance curves.
Breaking systems
Hydraulic breaking system, breaking of vehicles when applied to rear, front and all four
wheel, theory of internal shoe brake, design of brake lining and brake drum, different
arrangement of brake shoes, servo and power brakes.

Module II (12 hours)

Transmission Systems
Layout of the transmission system, main function of the different components of the
transmission system, transmission system for two wheel and four wheel drives.
Hotchkiss and torque tube drives.
Gear box : Sliding mesh, constant mesh and synchromesh gearbox, design of 3 speed
and 4 speed gear box, over drive, torque converter, semi and fully automatic
transmission.
Hookes joint, propeller shaft, differential, rear axles, types of rear axles, semi floating,
there quarter floating and full floating types.
Module III (14 hours)
Front wheel Geometry and steering systems : Camber, castor, kingpin inclination, toe-in
and toe-out, centre point steering condition for true rolling, components of steering
mechanism, power steering.
Electrical system of an automobile : Starting system, charging system, ignition
system, other electrical system.
Electrical vehicles:
History, electrical vehicles and the environment pollution, description of electric vehicle,
operational advantages, present EV performance and applications, battery for EV,
Battery types and fuel cells, Solar powered vehicles, hybrid vehicles.

Textbooks :
1. Automobile Mechanics , N.K.Giri, Khanna publishers
2. Automobile Engineering, K.M. Gupta, VolI & II, Umesh Publication

Reference Books
1. Automotive mechanics: William h. Crouse and Donald L. Anglin, TMH
2. The motor vehicle, Newton and Steeds
3. Automobile Mechanics, J. Heitner, East West Press
4. Automobile Engineering, Jain and Asthana, Tata McGraw Hill
5. Automobile Engineering, K.K.Ramalingam, Scitech
6. Automobile Engineering, Vol. I & II, Kirpal Singh, Standard Publications
7. A Text Book of Automobile Engineering, R.K.Rajput, Laxmi Publishers

PEME5302 COMPUTER AIDED DESIGN AND COMPUTER

AIDED MANUFACTURING (3-0-0)
Module I (11 hour)
Fundamentals of CAD: Design process, Applications of computer for design, Creating the
Manufacturing Database, The Design workstation, Graphical Terminal, Operator input Devices,
Plotters and other devices, Central Processing Unit, Memory types.

Module II (11 hour)

Computer graphics Software and Database: Configuration, Graphics Packages,
Constructing the Geometry, Transformations of geometry, Database structure and
content, Wire frame versus solid modeling, Constraint– Based modeling, Geometric
commands, Display control commands, Editing.

Module III (14 hour)

CAM - Numerical Control and NC Part Programming: Numerical Control, Numerical
Control elements, NC Cordinate system, NC motion control system, Manual and
Computer Aided programming, the APT language, Miscellaneous Functions, M,
Advanced part-programming methods.

Problems with conventional NC, NC technology: CNC, DNC, Combined DNC/ CNC
system, Adaptive control manufacturing systems, Computer Integrated Manufacturing
system, Machine Tools and related equipment, Materials Handling system: AGV,
Robots, Lean manufacturing.
Text Books
1. CAD/CAM Computer Aided Design and Manufacturing, M.P.Goover and E.W.Zimmers, Jr.,
Pearson
Reference Books
1. CAD/CAM Theory and Practice, Zeid and Subramanian, TMH
2. CAD/CAM Principles, Practice and Manufacturing Management, McMahon and Browne,
Pearson Education
3. CAD/CAM Concepts and Applications, C.R.Alavala, PHI
4. Computer Aided Design and Manufacturing, Lalit Narayan, Mallkarjuna Rao and Sarcar, PHI
5. CAD/CAM Theory and Conepts, K.Sareen and C.Grewal, S.Chand Publication
6. CAD/CAM/CAE, N.K.Chougule, Scitech
7. Principle of Interactive Computer Graphics, W.W.Newman, R.F.Sproull, TMH

PEME5304 TRIBOLOGY (3-0-0)

Module - I (12 hours)

Introduction : Lubricant and lubrication, Types of bearings, properties and testing of
lubricants,
Basic equations: Generalized Reynolds equation, Flow and Shear Stress, Energy
equation, Equation of state
Hydro dynamic lubrication :
Mechanism of pressure development and load carrying capacity, Plane-slider bearing,
Idealized slider bearing with a pivoted shoe, Step bearing, Idealized journal bearing. –
infinitely long journal bearing, Petroffs equation for a lightly loaded bearing, narrow
bearing,

Module - II (11 hours)

Oil flow and thermal equilibrium - Heat balance of lubricants
Hydrostatic Bearing :
Principles, Component of hydrostatic lubrication , Hydrostatic circular thrust bearing ,
calculation of pressure, load carrying capacity, flow rate , power loss in bearing due to
friction.

Module - III (12 hours)

Concept of gas lubricated bearing
Concept of Elastohydrodynamic lubrication, Design and selection of antifiction bearing
Friction and wear of metals :
Theories of friction, surface contaminants, Effect of sliding speed on friction,
classification and mechanism of wear, Wear resistant materials.

Text Books
1. Introduction to Tribology of Bearing , B.C .Majumdar , S. Chand & Co
Reference Books
1. Fundamentals of Tribiology , Basu S K., Sengupta A N., Ahuja B. B., , PHI 2006
2. Basic Lubrication theory, A. Cameron, John Wiley & sons
3. Lubrication Fundamentals, D.M.Pirro and A.A.Wessol, CRC Press
4. Theory and Practice of Lubrication for Engineers, Fuller, D., New York company 1998
5. Principles and Applications of Tribiology, Moore, Pergamaon press 1998
6. Tribiology in Industries, Srivastava S., S Chand and Company limited, Delhi 2002
7. Lubrication of bearings – Theoretical Principles and Design, Redzimovskay E I., Oxford
press company 2000
 PEME5303 RAPID PROTOTYPING (3-0-0)
Module – I (12 hours)
Product Development: Classification of manufacturing processes, Different
manufacturing systems, Introduction to rapid Prototyping (RP), Need of RP in context to
batch production, FMS and CIM and its application. Product prototyping – solid
modeling and prototype representation, reverse engineering, prototyping and
manufacturing using CNC machining.
Basic principles of RP steps in RP, Process chain in RP in integrated CAD-CAM
environment, Advantages of RP

Module - II (12 hours)

Rapid Manufacturing Process Optimization: factors influencing accuracy. Data
preparation errors, Part building errors, Error in finishing, influence of build orientation.
Classification of different RP techniques based on raw materials, layering technique (2D
or 3D) and energy sources.
Process technology and comparative study of stereo lithography (SL) with
photopolymerisation, SL with liquid thermal polymerization, solid foil polymerization,
selective laser sintering, selective powder binding, Ballastic particle manufacturing –
both 2D and 3D, Fused deposition modeling, Shape melting

Module – III (12 hours)

Laminated object manufacturing solid ground curing, Repetitive masking and
deposition.
Beam interference solidification, Holographic interference solidification special topic on
RP using metallic alloys, Programming in RP modeling, Slicing, Internal Hatching,
Surface skin films, support structure.
Software for RP: STL files, Overview of Solid view, magics, imics, magic communicator,
etc. Internet based software, Collaboration tools.

Text Book :

1. Rapid Prototyping and Engineering Applications, Frank W. Liou, CRC Press

2. Introduction to Rapid Prototyping, Amitav Ghosh, North West Publication, New Delhi

Reference Books :
1. Rapid Manufacturing, Flham D.T & Dinjoy S.S Verlog London 2001.
2. Rapid Prototyping Materials, Gurumurthi, IISc Bangalore.
3. Rapid Automated, Lament wood. Indus press New York
4. Stereo Lithography and other RP & M Technologies, Paul F. Jacobs: SME, NY 1996.
5. Rapid Prototyping, Terry Wohlers Wohler's Report 2000" Wohler's Association 2000.
 Free Elective – II

FESM6302 ADVANCE NUMERICAL METHODS (3-0-0)

Unit-I :
Interpolation: Piecewise Linear Interpolation, Piecewise Quadratic Interpolation,
Piecewise Cubic Hermite Interpolation, Piecewise Spline Interpolation.
Numerical Differentiation: First Derivative, Higher Derivatives, Partial Derivative,
Richardson’s Extrapolation.
Romberg algorithm for numerical integration.

Unit-II
Eigen values and Eigen Vectors: Basic power method, Rayleigh Quotient, Shifted power
method, Accelerating convergence, Inverse power method, Basic QR method, Better
QR method, Finding eigen vectors, Accelerating convergence
Fourier methods: Discrete Fourier Transforms, Fast Fourier Transforms, Matrix form of
FFT, Algebraic form of FFT, Mixed-Radix FFT

Unit-III
Ordinary Differential Equations: Adams-Bashforth Methods, Adams-Moulton Methods,
Adams Predictor-Corrector methods, Other Predictor-Corrector methods (Simpson’s
method and Milne’s method)
Parabolic Partial Differential Equation: Explicit Method, Implicit method, Crank-Nicolson
method
Hyperbolic Partial Differential Equation: Explicit Method, Implicit method.
Elliptic Partial Differential Equation: Finite-Element method.

Text Book:
1. L.V. Fausett,” Applied Numerical Analysis Using MATLAB”, Pearson Education

Reference Books:
1. W.Cheney and D. Kincaid,”Numerical Mathematics and Computing”, Fifth
Edition, Thomson/CENGAGE Learning
2. S. C. Chapra, ”Applied numerical methods with MATLAB”, second edition, Tata
McGraw Hills
3. R.J. Schilling and S.L.Harris,”Applied Numerical Methods for Engineering”,
CENGAGE learning
 PCEC4301 MICROPROCESSORS (3-0-0)

Unit I:
Organization of Microprocessor
Introduction to the general concept of microprocessor organization, I/O sub-systems,
programming the system, ALU, instruction execution, instruction word format,
addressing modes, address/data/control bus, tristate bus, interfacing I/O devices, data
transfer schemes, architectural advancements of microprocessor, evolution of
microprocessors.

Unit II:
Intel 8086- Hardware Architecture:
Introduction, Bus interface unit(BIU), Execution unit(EU), pin description, register
organization, instruction pointer, data register, pointer and index registers, status
register, stack, external memory addressing, bus cycle (minimum mode):memory or I/O
read/write for minimum mode, clock generator Intel- 8284A, bidirectional bus trans-
receiver 8286/8287, bus controller 8288, bus cycle memory read/write for minimum
mode, 8086 system configuration (minimum mode as well as maximum mode),
memory interfacing, interrupt processing; software interrupts, single step interrupt, non-
maskable interrupt, maskable interrupt, interrupt priority, DMA, Halt State, Wait for Test
state, comparison between 8086 an 8088.

Unit III:
Instruction set and programming:
Programmer’s model of Intel 8086, operand type, addressing modes 8086 assembler
directives, instruction set, programming examples on data transfer group, arithmetic-
logical groups, control transfer groups (loop and loop handling instruction), conditional
and unconditional group, procedures and stack operations, string instructions.,branch
program structure like IF-THEN-ELSE REPEAT-UNTIL and WHILE-DO,
I/O Interfacing ;
8-bit input- output port 8255 PPI, memory mapped i/o ports,8254 programmable
Interval Timer, 8273 Programmable Direct Memory Access Controller, 8251 USART,
8279 Programmable Keyboard/Display Controller.

Text Books:
1.The 8088 and 8086 Microprocessors Programming, Interfacing, Softw, Hardware and
Application; by Walter A. Triebel & Avtar Singh ; Pearson India.
2. Microprocessors and Interfacing; by Douglas V Hall ; McGraw Hill.
Reference Book:
1. Microprocessors and Micro controllers Architecture, programming and system Design 8085,
8086, 8051, 8096: by Krishna Kant; PHI.
2. The 8086 Microprocessor: Programming & Interfacing the PC- Kenneth J. Ayala, Delmar
Cengage Learning, Indian Ed.
 FEME6302 PROJECT MANAGEMENT (3-0-0)

Module‐I Project Management Concepts and Needs Identification

Attributes of a Project, Project Life Cycle, The Project management Process, Benefits of
Project Management, Needs Identification, Project Selection, Project organization, the
project as part of the functional organization.
Project feasibility Analysis: Technical feasibility, commercial and financial visibility,
Environment Analysis.

Module‐II Project Planning and Scheduling:

Design of project management system; project work system; work breakdown structure,
project execution plan, work packaging plan, project procedure manual; project
scheduling;
bar charts, line of balance (LOB) and Network Techniques (PERT / CPM)/ GERT,
Resource
allocation, Crashing and Resource Sharing, capacity planning and expansion capacity
decision.

Module III Project Monitoring and Control and Project Performance

Planning, Monitoring and Control; Design of monitoring system; Computerized PMIS
(Project Management Information System). Coordination; Procedures, Meetings,
Control;
Scope/Progress control, Performance control, Schedule control, Cost control,
Performance
Indicators; Project Audit; Project Audit Life Cycle, Responsibilities of Evaluator/ Auditor,
Responsibilities of the Project Manager.

Books:
1. Project Planning, Analysis, Selection, Financing, Prasana Chandra, TMH
2. Project Management, Grey, TMH.
3. Project Management, Richman, PHI
4. Project Management, Vasant Desai, HPH
5. Project Management, Bhavesh M.Patel, Vikash
6. Project Engineering & Management- Prasanna Chandra, Prentice Hall.
PCBM4301 Elements of Biomedical Instrumentation (3-0-0)
Module I (13 Hours)
(i) What is bioengineering: Engineering versus Science, Bioengineering, Biochemical
Engineering, Biomedical Engineering, and Career Opportunities.

(ii) Medical Instrumentation: Sources of Biomedical Signals, Basic medical

Instrumentation system, Performance requirements of medical Instrumentation system,
use of microprocessors in medical instruments, PC based medical Instruments, general
constraints in design of medical Instrumentation system & Regulation of Medical
devices.
(iii) Bioelectrical Signals & Electrodes: Origin of Bioelectric Signals, Electrocardiogram,
Electroencephalogram, Electromyogram, Electrode-Tissue Interface, Polarization, Skin
Contact Impedance, Motion Artifacts.

(Text Book-I-Chapter-0 , Text Book-II —Chapter-1, Text book-II- Chapter-2)

Module -II (14 Hours)

(iv) Electrodes for ECG: Limb Electrode, Floating Electrodes, Prejelled disposable
Electrodes, Electrodes for EEG, Electrodes for EMG.
(v) Physiological Transducers: Introduction to Transducers, Classification of
Transducers, Performance characteristics of Transducers, Displacement, Position and
Motion Transducers.

(Text book-II- Chapter-2 , Text Book-II, Chapter- 3 )

Module –III (13 Hours)

(vi) Physiological Transducers: Strain gauge pressure transducers, Thermocouples,
Electrical Resistance Thermometer, Thermister, Photovoltaic transducers, Photo
emissive Cells & Biosensors or Biochemical sensor
(vii) Recording Systems: Basic Recording systems, General considerations for Signal
conditioners, Preamplifiers, Differential Amplifier, Isolation Amplifier, Electrostatic and
Electromagnetic Coupling to AC Signals, Proper Grounding (Common Impedance
Coupling)

(Text Book-II, Chapter- 3, Text Book-II-Chapter-4 )

Text Books:-
I- Introduction to Biomedical Engineering by Michael M. Domach, Pearson Education
Inc,-2004
II- Hand Book of Biomedical Instrumentation-2nd Ed by R.S.Khandpur, Tata McGraw Hill,
2003.
Reference Books:
1) Introduction to Biomedical equipment technology, 4e. By JOSEPH.J.CAAR
 & JOHN.M.BROWN (Pearson education publication)
(2) Medical Instrumentation-application & design. 3e – By JOHN.G.WEBSTER
John Wiley & sons publications
(3) Leslie. Cromwell – Biomedical instrumentation & measurements, 2e PHI
(4) Dr. M. Arumugam – Biomedical instrumentations, Anuradha Publishers

PCIT4303 JAVA Programming (3-0-0)

Module – I 12 Hrs
Introduction to Java and Java programming Environment. Object Oriented
Programming. Fundamental Programming Structure: Data Types, variable, Typecasting
Arrays, Operators and their precedence.
Control Flow: Java’s Selection statements (if, switch, iteration, statement, while, do-
while, for, Nested loop).
Concept of Objects and Classes, Using Exiting Classes building your own classes,
constructor overloading, static , final, this keyword .
Inheritance: Using Super to Call Super class constructor, Method overriding, Dynamic
method Dispatch, Using Abstract Classes, Using final with inheritance. The Object
Class.
Packages & Interfaces : Packages, Access Protection, Importing package, Interface,
Implementing Interfaces, variables in Interfaces, Interfaces can be extended.
Exception Handling: Fundamentals, Types Checked , Unchecked exceptions, Using
try & catch, Multiple catch, throw , throws, finally, Java’s Built in exceptions, user
defined exception.

Module - II 12 Hrs
Multi Threading: Java Thread Model, Thread Priorities, Synchronization, Creating a
thread, Creating Multiple threads, Using isAlive ( ) and join ( ), wait () & notify ( ).
String Handling: String constructors, String length, Character Extraction, String
Comparison, Modifying a string.
Java I/O: Classes & Interfaces, Stream classes, Byte streams, Character streams,
Serialization.
JDBC: Fundamentals, Type I, Type II, Type III, Type IV drivers.
Networking: Basics, Socket overview, Networking classes, & interfaces, TCP/IP client
sockets, whois, URL format, URL connection, TCP/IP Server Sockets.

Module - III 12 Hrs

Applets: Basics, Architecture, Skeleton, The HTML APPLET Tag, Passing Parameters
to Applets, Applet context and show documents ().
Event Handing: Delegation Event model, Event Classes, Event Listener Interfaces,
Adapter classes.
AWT: AWT Classes window fundamentals, component, container, panel, Window,
Frame , Canvas, Creating a frame window in an Applet , working with Graphics , Control
Fundamentals , Layout managers, Handling Events by Extending AWT components.
Core java API package, reflection, Remote method Invocation (RMI)
Swing: J applet, Icons & Labels, Text fields, Buttons, Combo boxes, Tabbed panes,
Scroll panes, Trees, Tables.
Exploring Java-lang: Simple type wrappers, Runtime memory management, object
(using clone () and the cloneable Interface), Thread, Thread Group, Runnable.
Text Books:
1. Introduction to Java Programming: Liang, Pearson Education, 7th Edition.
 2. Java The complete reference: Herbert Schildt, TMH, 5th Edition.
Reference Books:
1. Balguruswamy, Programming with JAVA, TMH.
2. Programming with Java: Bhave &. Patekar, Pearson Education.
3. Big Java: Horstman, Willey India, 2nd Edition.
4. Java Programming Advanced Topics: Wigglesworth, Cengage Learning.
th
5. Java How to Program: H.M. Deitel & Paul J. Deitel, PHI, 8 Edition

PCME7302 PRODUCTION AND I. C. ENGINE LAB (0-0-3)

Production Laboratory (Minimum 06 experiments)

1. Determination of grain size, clay content, permeability and green compressive

strength of molding sand. (2 to 3 experiments)
2. Foundry Practice
3. Determination of strength of brazed and soldered joints.
4. Study of non-traditional machining process (ultrasonic machining/ abrasive jet
machining/ electro-discharge machining)
5. Determination of cutting forces in turning using lathe tool dynamometer
6. Determination of cutting forces in drilling using drilling tool dynamometer
7. Study on C. N.C. Machines and demonstration of making of job through CNC
machine.
8. Calibration of slip gauge using sine bar
9. Measurement of roughness / straightness / flatness of surfaces
10. Study of microstructure of steel specimen
I. C. Engine Laboratory (Minimum 04 experiments)
1. Load test on 4-stroke single cylinder C.I. engine.
2. Load test on 4-stroke single cylinder S.I. engine.
3. Morse Test on multi-cylinder S.I. or C.I. engine
4. Load test on variable compression ratio S.I. engine
5. Load test and Heat balance on 2 stroke S.I. Engine

PCME7301 MACHINE DYNAMICS & HEAT POWER LAB

(0-0-3)

Machine Dynamics Laboratory (Minimum 06 experiments)

1. Experiment on Rope brake / Band brake dynamometer

2. Experiment on Epicyclic gear train
3. Determination of gyroscopic couple using gyroscopic test rig.
4. Performance characteristics of a spring loaded governor
5. Determination of critical speed of rotating shaft
6. Experiment on static and dynamic balancing apparatus
7. Determination of natural frequencies of un-damped as well as damped vibrating
systems.
8. Study of interference and undercutting for gear drives
9. Experiment on Cam Analysis Apparatus.
10. Experiment on Journal Bearing Apparatus.

Heat Power (Automobile) Laboratory (Minimum 04 experiments)

1. Valve timing diagram of an IC engine
2. Study of a modern carburetor (e.g.Solex Carburtor)
3. Study of fuel injection system of a diesel engine
4. Analysis of exhaust gas of automobile
5. Study of different cooling systems in automobiles (Air cooling and water cooling).
6. Study of lubrication systems in automobiles.

PCME7303 MACHINE DESIGN PROJECT – I (0-0-3)

1. Assembly drawing of tail-stock of lathe with bill of materials

2. Assembly drawing of screw jack with bill of materials
3. Design & drawing of Riveted joint
4. Design and drawing of Cotter joint
5. Design and drawing of Knuckle joint
6. Design of shafts subjected to combined loading
7. Design and drawing of Flange coupling
8. Design of lever
9. Design and drawing of belt and pulley
Total number of Design : Minimum 6 nos.
Total No. of Drawing : 5 sheets (Two sheets for assembly drawing as per Sl no. 1 and 2
and three sheets for design, under Sl. No. 3, 4, 5, 7 and 9)

*******