PF Se m5000 Configuration Diagram

Issue November 2010
SPARC Enterprise Server Product SPARC Enterprise M5000
M5000
Pages 41
SPARC Enterprise M5000 Configuration Diagram

 New products: XTA-FAS-S3IE96GB
 Withdrawn products:
 Some minor corrections:
A T O:
This Config Guide enables for the first time the opportunity for “ATO”-ordering. ATO brings much more flexibility in the way how
to configure a SPARC Enterprise Server. For the previous “Pic to Order” (PTO) process, only a few run able base configurations
were pre-defined. These can be added by further Memory components, IO-controllers and HDDs, following the configuration
rules for the respective model.
With ATO the configuration gets build in a fundamental manner with much more flexibility by CPU, memory and Hard Disks.
PTO orders will keep valid.
Important Hint for ATO orders:

ATO Base Unit ordering excludes some of the PCI controllers. These cards have to be installed at customer site, which causes
additional service costs.
Picture SPARC Enterprise M5000 server Picture I/O Box for PCI expansion
Product Facts  Issue: November 2010  Product: SPARC Enterprise M5000 Page 2 / 41
Contents
SPARC Enterprise M5000 Configuration Diagram 1
Recommended 19"- rack PRIMECENTER 2 with 1100 mm depth 3
Overview M4000 and M5000 4
System Architecture 5
Product Overview SPARC Enterprise M5000 6
Features 6
ATO M5000 Server Product ID List 9
ATO M5000 COD (Capacity on Demand) Server Product ID List 9
M5000 COD (Capacity on Demand) CPU Right to Use (License) Product ID List 9
M5000 Internal Storage Device Product ID List 10
M5000 Filter Product ID List 10
M5000 Power Cords for Rack internal use Product ID List 11
Rack integration order numbers 11
Power Cords for PSU connection directly to Rack external Jacks: 11
TM
Solaris Operating System (OS) and other Software Product ID List 12
M5000 PCI Card Product ID List 13
Ethernet Controller 13
Serial Interface RS232 Controller 14
Cryptographic Host Bus Adapters 14
Fibre Channel Host Bus Adapters 15
SCSI Host Bus Adapters 17
SAS Host Bus Adapters 17
Console Connection 18
Ethernet Cables 20
Partitioning 21
CPU Module 26
M5000 CPU Product ID List 27
Additional Memory Module 28
M5000 Memory Product ID List 29
4 per M4000 8 per M5000 29
Notes on Memory ordering and mounting: 30
Memory Mirroring 32
I/O Board 33
M5000 second I/O Board Product ID List 33
I/O-BOX 35
M5000 external I/O-Box Product ID List 37
External storage units for M5000 38
External storage units for HDDs or MTC drives (differential SCSI) 38
FibreCAT SX40 38
FibreCAT TXF rack mountable peripheral Expansion unit for accessible devices 39
Order numbers 39
OS rules 39
For SAS TXF >= SOLARIS 10 5/08 (U5). No additional patch necessary. 40
FibreCAT TXF LINKS 40
Service clearance 40
M5000 Connectivity 41
Further information and contacts 41
Recommended 19"- rack PRIMECENTER 2 with 1100 mm depth

24 HU height 38 HU height 46 HU height
+ 2 x 2 HU vertical + 3 x 2 HU vertical + 4 x 2 HU vertical
S26361-K826-V212 S26361-K826-V213 S26361-K826-V214
 SPARC Enterprise M5000 servers can be mounted in PCR2 Rack versions with 1100 mm depth.
 If the mounting kits do NOT fit to the required rack, please order additional kits separately. For more details refer to the
Product Facts: PRIMECENTER Rack-Design Guide and Configuration PRIMECENTER Rack.
 To integrate a server or I/O-Box into a Rack by Factory additional Order numbers are mandatory (see chapter
“Rack integration order numbers”)!
 Safety Attention:
 To mount an M5000 server into a rack you have to take notice for the rules which are described in the “Installation
Guide” for Form factor models.
 M5000 System Base Unit is only allowed to be mounted up to Rack height unit 27 (lowest system height unit)
Up to 3 x M5000 serves in a common Rack are allowed!
 For M5000 integration in a PCR2 Rack two 2HU Support Brackets S26361-F2735-E15 must be used.
The lowest 2 HU in the Rack can not be used.
Installation of PRIMEPOWER servers and SPARC Enterprise Servers in other 19" racks than PCR2 is supported only, if „the
PRIMEPOWER - Rack Installation Guidelines for PRIMEPOWER systems“ are fulfilled.
For more information see the Fujitsu Technology Solutions extranet at:
http://manuals.ts.fujitsu.com/servers/sparc/m4m5io-pc-rack-install-en-01.pdf
Overview M4000 and M5000

SPARC Enterprise M4000 SPARC Enterprise M5000
Enclosure Rack 6U Rack 10U
Max. CPU / Processor Chips 4 x 2.53GHz 4 x 2.4GHz 4 x 2.15GHz 8 x 2.53GHz 8 x 2.4GHz 8 x 2.15GHz
TM TM TM TM TM TM
(multi-core, multi-thread, 2 SPARC64 SPARC64 SPARC64 SPARC64 SPARC64 SPARC 64
CPU per module) VII VII VI VII VII VI
Cores / Threads per System 16 / 32 8 / 16 32 / 64 16 / 32
Cores / Threads per processor
4/2 2/2 4/2 2/2
Chip
Primary Cache per core Instruction Instruction
Instruction 64 KB / Data 64 128 KB / Instruction 64 KB / Data 64 128 KB /
KB Data 128 KB Data 128
KB KB
SLC (Second Level Cache) per
5.5 MB 5 MB 5.5 MB 5 MB
Processor Chip (2 cores)
MBU (Mother Board unit) 2 CPU Modules 4 CPU Modules
(each 2 CPU chips on CPU Module) (each 2 CPU chips on CPU Module)
4 Memory Boards 8 Memory Boards
(each 8 slots DDR-II SDRAM) (each 8 slots DDR-II SDRAM)
Max. Memory by using max
256 GB 512 GB
DIMMs
max DIMM Slots (DDR-II) 32 64
Memory per expansion unit 8GB, 16GB, 32 GB or 64 GB
( 8 DIMMs per unit, only 8 GB option commes with 4 DIMMs per unit)
Multi domains (partitions) 2 4
Minimum domain configuration 1 CPU chip, 8 DIMMs, 2 PCI-Express slots at the smallest
Memory RAS feature ECC, Advanced ECC
IOU (I/O Unit, hereafter called 2
1
I/O board) (second IOU is expansion)
Internal PCI Slots 4 PCI-E (8 lanes per PCI slot) 8 PCI-E (8 lanes per PCI slot)
1 PCI-X (133MHz) 2 PCI-X (133MHz)
Max. Internal Disks
2 4
(2.5”SAS)
Removal media DVD (Standard); DAT (Option)
On-board GbE port
2 4 (2 on each IOU)
1000Base-T
On-board Serial -----
External IO exp. Yes
Max. Number of IO-Boxes 2 Boxes (each max 12 PCI slots) 4 Boxes (each max 12 PCI slots)
connected to 1 IOU, connected to 2 IOUs,
occupy 4 internal PCI-E slots occupy 8 internal PCI-E slots
Max. Number of PCI slots
25 50
(internal plus I/O-Boxes
Redundant parts HDD*, PSU, FAN, PCI-Cards*, DIMMs**
(*Software support & consideration on configuration are required;

**Memory Mirror function)
Hot-replacable parts (Hot swap) HDD, PSU, FAN, PCI-cards, I/O-Boxes, DAT
(Hard Disk drives are only ready for hot replacement if the respective option for
redundancy is implemented.)
Dynamic degradation CPU chips, memory, power supply units, fans, HDDs,
PCI cards (only in multi-path configuration)
RAS Management XSCF
RAS features All major components can be automatically deconfigured after rebooting,
Deconfiguration minimizes system impact in case of an uncorrectable error
Finer granularity to prevent propagation of errors
Buses between ASICs are protected by ECC
Memory mirroring (optional)
XSCF - Interfaces 2 LAN interface 100Base-TX (RJ45)
1 serial port RS232 (RJ45)
1 RCI interface, Fujitsu/Fujitsu Technology Solutions proprietary interface
1 USB port (for service only)
Power Supply Units

2 4
(by default in each base unit)
Power Cables
2 4
AC Power Cord3.5m (C19-C20)
( Must be ordered with each PSU) (Must be ordered with each PSU)
SELX9P71U
System Architecture
PRIMECENTER 2 Rack
deep 1100mm 24U, 38U, 46U PC LAN
Conso
le
SPARC Enterprise M5000 10U
Basic Config up to 8x CPU (up to 32 core) / 512GB MEM / 4x Hard disk /
2x PCI-X and 8x PCI-express slot
Solari
Up to 8 CPU, 4 Module (SPARC64 VI or VII). Up to 32 core (2 or 4 s
Threads per core) 2.15GHz, 2.4GHz or 2.53GHz
PC
CPU order# Type Serrial
SEL[XY]1A1U 2 CPU, 2.15GHz / 5.0MB SLC for 1 CPU Management LAN HUB
SEL[XY]1B1U 2 CPU, 2.4 GHz / 5.0MB SLC for 1 CPU or
SEL[XY]1C1U 2 CPU, 2.53GHz / 5.5MB SLC for 1 CPU LAN-Management
CPU Module CPU Module 10/100 BaseT copper
CPU CPU CPU CPU

This picture is an overall view only.
CPU Module CPU Module
Not all order numbers are inplemented in this picture.
CPU CPU CPU CPU To follow the rules of the configuration diagram is mandatory!
Main Memory options: up to 512GB within 8GB DIMMs
MEM order# Type a. U320 SCSI-Contr. PCI-e 1 G-bit LAN Contr. PCI-e
SEL[XY]2F2U 4 x 2 GB DIMM LVD 2 port SG- 2 port UTP (copper)
a.
SEL[XY]2B1U
SEL[XY]2C1U
SEL[XY]2D1U
8 x 2 GB DIMM
8 x 4 GB DIMM
8 x 8 GB DIMM
.
(X)PCIE2SCSIU320Z (X)7280A-2
1 G-bit LAN Contr. PCI-e 1 G-bit LAN Contr. PCI-e

MEM MEM MEM MEM MEM MEM MEM MEM M e m o ry
Bo a rd
2 port MMF (optic) 4 port UTP (copper)
MEM MEM MEM MEM MEM MEM MEM MEM
. <-> means OR . .
M e m o ry
Bo a rd
(X)7281A-2 (X)4447A-Z
Bo a rd

Bo a rd

Fibre Channel 4Gb Fibre Channel 4Gb
Bo a rd

1 port 1 port
. .
Bo a rd
MEM MEM MEM MEM MEM MEM MEM MEM M e m o ry SG-(X)PCIE1FC-EM4 SG-(X)PCIE1FC-QF4
Bo a rd
MEM MEM MEM MEM MEM MEM MEM MEM

.
M e m o ry
..
Bo a rd

Internal I/O Board (standard) : PCI-e (8 lane)
. 2 port 2 port
1 internal DVD (standard) PCI-e (8 lane)
. . SG-(X)PCIE2FC-EM4 SG-(X)PCIE2FC-QF4
1 internal DAT (optional)
2 internal disk bays (standard),
Drives need to order the following HDD’s.
PCI-e (8 lane)
PCI-e (8 lane) . Fibre Channel 8Gb
1 port
Fibre Channel 8Gb
1 port
PCI-X (133MHz)
73GB, 146GB or 300GB 2,5” SAS 10k rpm
2 disk bays
onboard 1 Gbit Copper LAN
. .
SG-(X)PCIE1FC-EM8-Z SG-(X) PCIE1FC-QF8-Z
.
Second (Internal) I/O Board (optional) : PCI-e (8 lane) .. ..

Fibre Channel 8Gb
2 port
Fibre Channel 8Gb
2 port
PCI-e (8 lane)
. .
SG-(X)PCIE2FC-EM8-Z SG-(X)PCIE2FC-QF8-Z
SR XFPTranceiver
2 internal disk bays (standard),

Drives need to order the following HDD’s.
PCI-e (8 lane)
PCI-e (8 lane) . . SAS 8port Controller,
PCI-e
10 G-bit LAN Contr. PCI-e
2 port (GBICs for optic or copper
for short reach
or
(X)5558A(-Z)
PCI-X (133MHz) necessary ) LR XFPTranceiver
73GB, 146GB or 300GB 2,5” SAS 10k rpm
2 disk bays
Four PSU standard, 2 default plus 2 redundancy
. .
SG-(X)PCIE8SAS-E-Z (X)1027A-Z for long reach
(X)5560A-Z
10 G-bit LAN Contr. PCI-e 10 G-bit LAN Contr. PCI-e

2 fiixed port optic SR
PSU PSU PSU PSU 1 fiixed port optic SR
(X)1106A-Z (X)1107A-Z
SEN[YX]8BE1S I/O Expansion (PCI) Box (with 1 PCI-Express boat as standard)

4U
. .
Crypto Accelerator 6000
OR SEN[YX]8BX1S I/O Expansion (PCI) Box (with 1 PCI-X boat as standard)
First Boat Standard

PCI-e
Link Card Kit optional
PCI
Slot
PCI
Slot
PCI
Slot
PCI
Slot
PCI
Slot
Second Boat optional; SEN[YX]8TE1U as PCI-Express OR

PCI
Slot
SEN[YX]8TX1U as PCI-X
. (X)6000A
PCI PCI PCI PCI PCI PCI SAS 2port Raid Contr., Flash
SAS 2port
Memory
RaidAdapter
Contr.,
Slot Slot Slot Slot Slot Slot or PCI-e 96 GB Flash
PCI-e
on PCI-e slot
OR
SEN[YX]8BE1S
SEN[YX]8BX1S
I/O Expansion (PCI) Box (with 1 PCI-Express boat as standard)
I/O Expansion (PCI) Box (with 1 PCI-X boat as standard)

4U .
SG(X)PCIESAS-R-EXT-Z SG(X)PCIESAS-R-EXT-Z
XTA-FAS-S3IE96GB
First Boat Standard Link Card Kit optional

PCI PCI PCI PCI PCI PCI
Slot Slot Slot Slot Slot Slot 1 port 1 port
Second Boat optional; SEN[YX]8TE1U as PCI-Express OR
PCI
Slot
PCI
Slot
PCI
Slot
PCI
Slot
PCI
Slot
PCI
Slot
SEN[YX]8TX1U as PCI-X
. .
SG-(X)PCI1FC-EM4-Z SG-(X)PCI1FC-QF4

SEN[YX]8BE1S I/O Expansion (PCI) Box (with 1 PCI-Express boat as standard) 2 port 2 port
4U
OR SEN[YX]8BX1S
First Boat Standard

PCI PCI PCI
I/O Expansion (PCI) Box (with 1 PCI-X boat as standard)
PCI PCI PCI

.
SG-(X)PCI2FC-EM4-Z SG-(X)PCI2FC-QF4
Slot Slot Slot Slot Slot Slot
Second Boat optional; SEN[YX]8TE1U as PCI-Express OR SEN[YX]8TX1U as PCI-X

SEN[YX]8BE1S I/O Expansion (PCI) Box (with 1 PCI-Express boat as standard)

4U
OR SEN[YX]8BX1S I/O Expansion (PCI) Box (with 1 PCI-X boat as standard)
First Boat Standard Link Card Kit optional

Second Boat optional; SEN[YX]8TE1U as PCI-Express OR SEN[YX]8TX1U as PCI-X

a.
FibreCAT TXF SCSI – Box for changeable media drives 3U
up to 4 drive bay
Media slot Media slot
o
r
Media slot Media slot
Connection to
FibreCAT SX40 SAS – HDD - JBOD 2U cascading box
SX40s.
SX40.
12 SAS disk bay SAS I/O module
Product Overview SPARC Enterprise M5000

SPARC ENTERPRISE M5000 is a midrange server developed using the expertise of Fujitsu and Sun Microsystems. It has
been designed to be the best choice in mission-critical computing solutions. High scalability comes from eight CPU chips
TM TM
(16 cores with SPARC64 VI and 32 cores with SPARC64 VII) and is backed by exceptional reliability and excellent
TM
means for asset investment protection. Based on VMT (vertical multi-threading) architecture with SPARC64 VI and SMT
TM
(simultaneous multi-threading) architecture with SPARC64 VII it delivers high scalability without change to applications.
Features
1. SPARC ENTERPRISE M5000 is a scalable enterprise server.
 Up to eight dual core CPU or quad core CPU chips can be installed.
 Up to 256 GB of memory and 50 I/O slots (when four I/O Boxes are connected) are supported for excellent scalability.
 The maximum data transfer performance of 64 GB/s ensures excellent linear scalability.
Motherboard
Systemboard #0
CPU module #0 I/O Board #0
CPU chip #0
CPU CPU Memory
DIMM DIMM
core #0 core #1
access Disk Disk
CPU CPU controller
core #2 core #3
CPU chip #1
CPU
PCI Express
CPU
core #0 core #1 PCI Express
CPU CPU
core #2 core #3 PCI-X
CPU module #1
CPU chip #2
CPU CPU PCI Express
core #0 core #1
System controller PCI Express
CPU CPU
core #2 core #3
CPU chip #3
CPU CPU
core #0 core #1
CPU CPU
core #2 core #3
Systemboard #1
CPU module #2 I/O Board #1
CPU chip #2
CPU CPU
core #0 core #1
Disk Disk
CPU CPU
core #2 core #3
CPU chip #3
CPU CPU PCI Express
core #0 core #1 System controller
PCI Express
CPU CPU
core #2 core #3 PCI-X
CPU module #3
CPU chip #2
CPU CPU PCI Express
core #0 core #1
CPU
PCI Express
CPU
core #2 core #3
DIMM Memory DIMM
CPU chip #3
access
CPU CPU
controller
core #0 core #1
CPU CPU
core #2 core #3
Notes for Picture:


TM
Cores with white background are in SPARC64 VI

TM
Cores with white and green background are in SPARC64 VII
TM
2. Dual-core SPARC64 VI processor.
 90 nm copper wiring technology is used in the processor to provide higher performance at lower power consumption.
 The dual-core processors have large caches (primary cache: instructions 128 KB + data 128 KB per CPU core;
secondary cache: 5 MB per CPU chip with 2.1 GHz.
 Multi-core and multi-threading technologies ensure high parallel-processing performance.
 Both the primary and secondary cache use ECC (Error Checking & Correction) for high reliability.
 Registers and ALU are all parity protected. This further enhances the high reliability of the server.
TM
3. Quad-core SPARC64 VII processor.
 65 nm copper wiring technology is used in the processor to provide higher performance at lower power consumption.
 The quad-core processors have caches (primary cache: instructions 64 KB + data 64 KB per CPU core; secondary
cache: 5 MB per CPU chip with 2.4 GHz; 5.5 MB per CPU chip with 2.53 GHz.
 Multi-core and multi-threading technologies ensure high parallel-processing performance.
 Both the primary and secondary cache use ECC (Error Checking & Correction) for high reliability.
 Registers and ALU are all parity protected. This further enhances the high reliability of the server.
4. Integrated high-reliability features make this server suitable for 24-hour operation.
 All address/data paths between key LSIs, such as CPU chips, memory controllers, I/O controllers and system
controllers, are ECC protected for higher reliability.
 Key components are redundant and hot replacement is supported.
5. Very flexible partitioning functions are provided.

 Multiple independent systems can be built on a single server called partitions or domains.
 Each partition can individually be configured.
 Up to four partitions are supported.
 The motherboard on which CPU- and memory-modules are mounted is sub-divided into eight parts, and the two I/O
board are sub-divided into four. A combination of sub-parts from motherboard and I/O board form a partition, in
maximum 4.
6. Partition independent processor based system control facility: XSCF (eXtended System Control Facility)
 XSCF detects abnormal conditions and controls the system without relying on system status, such as CPU abnormality
or system hang. (Mutual monitoring/abnormal CPU notification, fan rotation frequency monitoring/control, power
monitoring/control, humidity/temperature monitoring, etc., are provided)
 Monitoring/control of peripheral devices such as RCI-connected units (cluster nodes) and expansion cabinets is
available via RCI (Remote Cabinet Interface). Remote power-on/off is also available.
 The operational status of the server can also be monitored by XSCF.
 The embedded partition control facility renders the need for an external control console terminal unnecessary.
7. Remote Customer Support

 Remote Customer Support will be handled via Teleservice.
8. ServerView Enterprise Edition 2.0 is available for download in the Fujitsu Technology Solutions Software Pool.
 ServerView Enterprise Edition 2.0 provides consolidated management of all Fujitsu Technology Solutions servers
including PRIMEPOWER, SPARC Enterprise, PRIMEQUEST and PRIMERGY. Server managing functions for all
managed servers, such as hardware configuration display and status monitoring, are provided for system
administrators via a unified GUI and standard operating processes.
a. The status monitoring of all servers is available from a single management client. The status of key components,
such as CPU/memory of each server, can be displayed in a unified tree view.
b. When server components fail, SVS EE displays each event graphically together with the relevant message for
prompt defective part location.
c. Server management can be performed with unified operability.
9. The DR (Dynamic Reconfiguration) functions are supported.

10. Configuration Diagram of the Main Unit
* Areas indicated in blue show components belonging to the base units; those indicated in red show options (purchased
separately, but see also base unit description).
11. Hardware for M5000

 Motherboard
The motherboard carries CPU modules and memory modules. Four CPU modules (eight CPU chips) and eight
memory modules (64 DIMMs) can be mounted. The motherboard is part of the base unit.

st
1 I/O unit (standard)
The I/O unit has a connection to two Hard Disk Drive bays, one DVD Drive bay and one DAT Drive bay. It contains two
*2
onboard LAN ports, four PCI Express slots and one PCI-X slot.

nd
2 I/O unit (optional)
nd *2
The 2 I/O unit has a connection to two Hard Disk Drive bays. It contains two onboard LAN ports, four PCI Express
slots and one PCI-X slot.
 System disk
Each partition requires at least one system disk for Solaris-installation. System disks can be realized in any of the
following ways. To improve system reliability it is recommended to duplicating (mirroring) the system disk.
A) Mount a Hard Disk Drive in a disk bay inside the server.
B) Ultra 320 SCSI cards, expansion file units together with external HDDs can also be used as system disks.
C) When using SAN Boot, fibre channel cards, RAID devices and system disks must be prepared. Use a disk in a
RAID device as the system disk. When installing the OS on the RAID device, you need to prepare another
installation server, or use one partition as an installation server using method A) above.
D) LAN Boot from other SPARC Enterprise Server is also possible.
ATO M5000 Server Product ID List
PART NUMBER LONG DESCRIPTION SHORT Planned Last

DESCRIPTION Order Day
M5000family:
SEFASY11S Fujitsu Technology Solutions SPARC Enterprise M5000 M5000 CPU- TBD
Base Server Cabinet (ATO Base) , 1 DVD-ROM, 2*Gb ,MEM-,Disk- less
ethernet ports, 1 I/O tray with 4 PCI-E and 1 PCI-X slots, 4 1xI/O tray
power supplies (110V or 220V with N+N redundancy).
None memory and none SAS disk drives by
standard included!
ATO M5000 COD (Capacity on Demand) Server Product ID List

M5000family:
SEFBC111S Fujitsu Technology Solutions SPARC Enterprise M5000 M5000 CoD TBD
COD (Capacity On Demand) and ATO server. 2.1GHz 8P, 1xI/O
TM
Includes 8x unlicensed 2.15GHz SPARC64 VI CPUs (4 tray
CPU boards with 2 x CPUs each, 5MB on-chip L2 cache),
1 I/O tray with 4 PCI-E, 1 PCI-X slots in total and 2x 1Gb
Ethernet ports, 1x DVD, 4 power supplies (includes
redundancy and DPF).
As minimum to each COD Server 2 CPU RTU (Right To

Use) licenses, memory and HDD are required (must be
ordered together with the system)!
SEFBF111S Fujitsu Technology Solutions SPARC Enterprise M5000 M5000 CoD 08.01.2010
COD (Capacity On Demand) and ATO server. 2.4GHz 8P, 1xI/O
TM
Includes 8x unlicensed 2.4GHz SPARC64 VII CPUs (4 tray
CPU boards with 2 x CPUs each, 5MB on-chip L2 cache),
1 I/O tray with 4 PCI-E, 1 PCI-X slots in total and 2x 1Gb
Ethernet ports, 1x DVD, 4 power supplies (includes

SEFBJ111U Fujitsu Technology Solutions SPARC Enterprise M5000 M5000 CoD TBD
COD (Capacity On Demand) and ATO server. 2.53GHz 8P,
TM
Includes 8x unlicensed 2.53GHz SPARC64 VII CPUs (4 1xI/O tray
CPU boards with 2 x CPUs each, 5.5MB on-chip L2
cache), 1 I/O tray with 4 PCI-E, 1 PCI-X slots in total and
2x 1Gb Ethernet ports, 1x DVD, 4 power supplies (includes

M5000 COD (Capacity on Demand) CPU Right to Use (License) Product ID List

M5000 family:
SELX9RU1S Fujitsu Technology Solutions SPARC Enterprise Server CoD RTU license TBD
COD 2.0 CPU Right-To-Use (RTU) license for one for 1 CPU (FF
Capacity-on-Demand (COD) CPU, for use with SPARC model)
Enterprise M4000 and M5000 servers.
Note to COD:
COD Licenses are automatically arranged by the service processor (XSCF) (see also: Server Administration Guide).
Licenses can only manually be assigned to domains, but not to hardware components like CPU.
If licenses are manually assigned to domains, the licenses will be automatically arranged to the CPU’s of this domain,
first CPU gets first license which is assigned for this domain, second CPU gets second license and so on.
If there is only one big domain, the arrangement is the same: First CPU gets first license which is assigned for this
domain, second CPU gets second license and so on.
Result for M5000: To use the second system-board in one big domain over the complete system a minimum of 5
licenses is necessary!
In addition the “Note to Memory ordering” is also permissible for COD server!
M5000 Internal Storage Device Product ID List
Marketing P/N Marketing P/N Maximum Number

Without factory Factory Option Description Supported per Comments
integration! integration only! System
nd
2 I/O tray required
SEPX3A11U SEPY3A11U MR 73GB 10K RPM SAS Hard Disk Drive.
Up to 4 per M5000 for HDD 3 & 4 on
LOD: 16.10.2009 LOD: 10.07.2009 Without factory integration!
M5000
nd
MR 146GB 10K RPM SAS Hard Disk 2 I/O tray required
SEPX3C11U
SEPY3C11U Drive. Up to 4 per M5000 for HDD 3 & 4 on
LOD: 16.10.2009
Without factory integration! M5000
nd
2 I/O tray required
MR 146GB 10K RPM SAS Hard Disk
SELX3C12U Up to 4 per M5000 for HDD 3 & 4 on
Drive.
M5000
nd
2 I/O tray required
SELX3E11U SELY3E11U 2.5" 300GB SAS Disk Drive Up to 4 per M5000 for HDD 3 & 4 on
M5000
For all slots where
no HDD ordered
this Filler Panel is
---- SELY9MF1U SE M4_M5000 HDD Filler Panel mandatory, also
for HDD Slots
where no I/O-tray
is connected.
Up to 1 per M4000
SELX9DT1U SELY9DT1U DAT 72 Tape Drive.
Up to 1 per M5000
If no DAT ordered
---- SELY9TF1U SE M4_M5000 DAT Filler Panel this Filler Panel is
mandatory.
M5000 Filter Product ID List

SEFX9FL1U ---- M5000 air filter kit 1 per system

M5000 Power Cords for Rack internal use Product ID List

M5000 requires 4x 16A power cords, each I/O-Box requires 2x 10A power cords.
Power Cord, SELX9P71U

to a Rack internal Socket strip,
16 A Must be ordered to each System PSU.
For System Base Units!
In combination with the PSU of Socket strip 1-phasen 32A SDL S26361-F2262-E132
the Base Units. 1x 3 jacks IEC320 C19 (16A)
1x 2 jacks IEC320 C13 (10A)
& 1x plug IEC309 (CEEform blue S26361-F2262-L132
(32A))
In combination with the PSU of
the I/O Boxes. Socket strip 3-phasen 32A SDL S26361-F2262-E332
3x 3 jacks IEC320 C19 (16A)
3x 2 jacks IEC320 C13 (10A) S26361-F2262-L332
1x plug IEC309 (CEEform red (32A))
Power Cord, 1
to a Rack internal Socket strip, SERXP333WS * )
10 A OR
1
T26139-Y1968-E10 * )
For I/O-Box!
Socket strip 1x 10 jacks IEC320 C13 S26361-F2262-E40

(10A) auf 1 x plug CEEform (16A) S26361-F2262-L40
Socket strip 1x 10 jacks IEC320 C13 S26361-F2262-E41
(10A) auf 1 x plug NEMA L6-30 (For
In combination with the PSU of S26361-F2262-L41
US / CAN.)
the I/O Boxes.
Socket strip 1 x 10 jacks IEC320 C13 S26361-F2262-E42
(10A)
to 1 x plug IEC 320 C20 (16A) for S26361-F2262-L42
UPS
Socket strip 3phase 3x 8 jacks S26361-F2262-E31

IEC320 C13 S26361-F2262-L31
Socket strip Rack mount Kit 2U S26361-F2262-E301

Rack mount Kit
horizontal S26361-F2262-L301
The offered Socket strips are documented in „ PRIMECENTER Rack Power Connection Concept “:
http://docs.ts.fujitsu.com/dl.aspx?id=0b131c75-487c-4d9f-b397-8af84b27d1ce
1
Note: * ) Differentiation for Power Cords in two cases:
1. Cords who will be preferred by orders where a PCR2 (Prime Center Rack 2) are in the same order as the Server
or IO-Box self and will be completed in our Rack Factory.
In this case, the order number T26139-Y1968-E10 will be preferred and in System Architect, this order number
will be configured with Power Assistant.
2. Cords who will be preferred by orders where NO PCR2 (Prime Center Rack 2) are in the same order as the
Server or IO-Box self and will be delivered without Rack while there reserved Rack space at customer side.
In this case, the order number SERXP333WS will be preferred and in System Architect, it has to be configured.
Rack integration order numbers

To integrate a server or I/O-Box into a Rack by Factory additional Order numbers are mandatory!
Integrate a M4000 or M5000 server into a Rack by Factory RACK-SER2
Integrate a I/O-Box into a Rack by Factory RACK-SER1
Power Cords for PSU connection directly to Rack external Jacks:

Must only be ordered for direct Power connections outside of the Rack to a country specific jack.
Marketing P/N Marketing P/N Description: Number of cables

Without factory Factory It is recommended to order 1 Cord to needed for M5000:
integration! integration only! each PSU:
SELX9P21U ---- MR AC Power Cord (for Continental Europe) 4
Power supply unit and power supply connections

SPARC ENTERPRISE M5000 has 2+2 redundant power supply units (four in total).
Connect the power supply units as follows.
Single Power Feed Dual Power Feed
HDD#1 HDD#3
HDD#0 HDD#2
DAT DAT
Power Power Power Power

supply supply supply supply
unit #0 unit #1 unit #2 unit #3
If an uninterruptible Power Supply (UPS) is used it shall only

supply one of the two power feeds.
SolarisTM Operating System (OS) and other Software Product ID List
The SPARC Enterprise M5000 servers come with the Solaris 10 Operating System preinstalled on an HDD.
Order Numbers Description: Attention:

Media Kit:
SOLZ9- Solaris 10 OS Media kit
10JC9A7M Solaris 10 Update 6 DVD Media Kit. Multilingual,
no hardcopy documentation, no license.
Note: Must be ordered with each system if Premium Pack is not ordered!
SOLZ9- Solaris 10 OS Media kit One of these

10KC9A7M Solaris 10 Update 7, Mediakit (DVDs) two positions
no hardcopy documentation, no license. must be
ordered for
each system!
SOLZ9- Solaris 10 OS Media kit
10LC9A7M Solaris 10 Update 8, Mediakit (DVDs)
no hardcopy documentation, no license.
U24529-C592A Solaris 10 Accessories Kit SPARC Enterprise Server Low End and Must be
Midrange and ESF CD (Partition DR, SCF interface etc.) U24529-C502A ordered with
M8M9-SBPCK-01 SES Safety Instructions + Warranty Docs each system!
X6099A IPsec enabler CD for Crypto Accelerator 6000
Note: Can be ordered with Crypto Accelerator!
M5000 PCI Card Product ID List
Ethernet Controller
Overview Order PCI for Description Max within a Max in an I/O-

Numbers options: Bus Factory System boat
type Integrati
on or X-
option
2
X-option only
X7281A-2 X-option 8 with new order
by ATO
possible.
PCI-e Dual Port Gb Ethernet MMF 8
Fact.-integrat.
Fact.- with new
7281A-2 ----
Integrat. Server order
by ATO
possible.
2
X-option only
X7280A-2 X-option 8 with new order
by ATO
possible.
PCI-e Dual Port Gb Ethernet UTP 8
Fact.-integrat.
Fact.- with new
7280A-2 ----
by ATO
possible.
2
X-option only
8 incl. IO-
X4447A-Z X-option with new order
Boats
by ATO
Quad Giga Ethernet UTP Adapter possible.
8 incl. IO-
PCI-e
Boats
Max. 2 per Domain! Fact.-integrat.
Fact.-
4447A-Z with new ----
Integrat.
Server order
by ATO
possible.
X1027A-Z X-option 4 ----

10Gb Ethernet Dual Port
(requires a fibre transceiver) 4
PCI-e Fact.-integrat.
1027A-Z
Fact.-
Integrat.
Max. 2 per Domain! with new
Server order
----
by ATO
possible.
In summery
max. 2 per
X5558A ---- X-option ----
controller.
In summery
Transceiver (10GBASE-SR: 850nm, 300m, max. 2 per
Options MMF). controller.
for Fact.- Fact.-integrat.
5558A-Z ---- ----
(X)1027A Integrat. with new
-Z Server order
by ATO
possible.
In summery
X5560A- Transceiver (10GBASE-LR: 1310nm, max. 2 per
---- X-option ----
Z 10km, SMF). controller.
In summery
max. 2 per
controller.
Fact.- Fact.-integrat.
5560A-Z ---- ----
Integrat. with new
Server order
by ATO
possible.
2
X-option with
X1106A-Z X-option 10Gb Ethernet Single Port new Server ----
(with one fixed Short Receive Optical Port) order by ATO
PCI-e possible.
Fact.- Max. 2 per Domain!

---- ---- ----
Integrat.
2
X-option with
10Gb Ethernet Dual Port
X1107A-Z X-option new Server ----
(with two fixed Short Receive Optical
order by ATO
PCI-e Ports)
possible.
----
Fact.- Max. 2 per Domain! ---- ----
Integrat.
Serial Interface RS232 Controller
Overview Order PCI for Description Max within a Max in an

Numbers options: Bus Factory System I/O-boat
type Integrati
on or X-
option
2
X-option with
X2156A-2 X-option Serial Asynchronous Interface (SAI/P) new Server ----
adapter 3.0 order by ATO
PCI possible.

2156A-2 ---- ----
Integrat.
Cryptographic Host Bus Adapters

type Integrati
on or X-
option
X6000A X-option 3 ----
Crypto Accelerator 6000

3
PCI-e Fact.-integrat.
6000A
Fact.- Max. 3 per Domain! with new
----
by ATO
possible.
Fibre Channel Host Bus Adapters

type: Integrati
on or X-
option
6
X-option only
SG-XPCIE2FC-QF4 X-option Dual 4Gb Fiber Channel Network 8 with new order
Adapter, by ATO
possible.
PCI-e Max. quantity. 8
Fact.-integrat.
Fact.- 8 per Domain with new
SG-PCIE2FC-QF4 ----
Integrat. 24 per Server incl. IO-box Server order
by ATO
possible.
6
X-option only
SG-XPCIE2FC-EM4 X-option Dual 4Gb Fiber Channel Network Adapter, 8 with new order
by ATO
possible.
8 per Domain Fact.-integrat.
Fact.- with new
SG-PCIE2FC-EM4
----
by ATO
possible.
6
X-option only
SG-XPCIE1FC-QF4 X-option Single 4Gb Fiber Channel Network 8 with new order
Adapter, by ATO
possible.
Fact.-integrat.
SG-PCIE1FC-QF4 ----
by ATO
possible.
6
X-option only
SG-XPCIE1FC-EM4 X-option Single 4Gb Fiber Channel Network 8 with new order
Adapter, by ATO
possible.
Fact.-integrat.
SG-PCIE1FC-EM4 ----
by ATO
possible.
8 6
Dual 8Gb Fiber Channel Network
X-option with X-option only
Adapter
SG-XPCIE2FC-QF8-Z X-option new Server with new order
order by ATO by ATO
PCI-e Max. quantity: possible. possible.
Fact.- 8 per Domain

---- ---- ----
Integrat. 18 per Server incl. IO-box
8 6
Dual 8Gb Fiber Channel Network Adapter X-option with X-option only
SG-XPCIE2FC-EM8-Z X-option new Server with new order
Max. quantity: order by ATO by ATO
PCI-e possible. possible.
8 per Domain
Fact.-
---- Integrat. 18 per Server incl. IO-box ---- ----
Single 8Gb Fiber Channel Network Adapter 8 6

X-option with X-option only
SG-XPCIE1FC-QF8-Z PCI-e X-option
new Server with new order
Max. quantity. order by ATO by ATO
possible. possible.
8 per Domain
24 per Server incl. IO-box
Fact.-
---- Integrat.
---- ----
8 6
Single 8Gb Fiber Channel Network Adapter X-option with X-option only
SG-XPCIE1FC-EM8-Z X-option new Server with new order
Max. quantity: order by ATO by ATO
PCI-e possible. possible.
8 per Domain
Fact.-
---- Integrat. 24 per Server incl. IO-box ---- ----
SG-XPCI2FC-QF4 X-option 2
Dual 4Gb Fiber Channel Network 2

PCI-X Fact.-integrat. ----
Adapter, RoHS 6 compliant
Fact.- with new
SG-PCI2FC-QF4
by ATO
possible.
SG-XPCI2FC-EM4-Z X-option 2
Dual 4Gb Fiber Channel Network Adapter, 2

RoHS 6 compliant
Fact.- with new
SG-PCI2FC-EM4-Z
by ATO
possible.
SG-XPCI1FC-QF4 X-option 2
Single 4Gb Fiber Channel Network 2

Fact.- with new
SG-PCI1FC-QF4
by ATO
possible.
SG-XPCI1FC-EM4-Z X-option 2
Single 4Gb Fiber Channel Network 2

Fact.- with new
SG-PCI1FC-EM4-Z
by ATO
possible.
SCSI Host Bus Adapters

type: Integrati
on or X-
option
2
X-option only
SG-
X-option 4 with new order
XPCIE2SCSIU320Z
by ATO
PCI-E Dual channel Ultra320 differential possible.
PCI-e SCSI host bus adapter includes standard 4
and low profile brackets. RoHS 6 compliant Fact.-integrat.
Fact.- with new
SG-PCIE2SCSIU320Z ----
by ATO
possible.
Note: SCSI Controller SG-(X)PCIE2SCSIU320Z using Solaris 10 Update 3 can only be placed in PCI-express slot #2, #3 or #4
from the IOU, not in PCI-express slot #1 nor in I/O-Box which is connected to this slot!
With Solaris 10 Update 4 and newer releases this SCSI-Controller is also allowed in PCI-express Slot #1, see table
above.
SAS Host Bus Adapters

Numbers options: Bus Factory System and I/O-boat and
type: Integrati max in a max in a
on or X- domain domain
option
2
X-option only
SG-XPCIE8SAS-E-Z X-option 4 with new order
by ATO
SAS 2connector, 8port/8line--PCI-e possible.
PCI-e 4
Max. 4 per Domain! Fact.-integrat.
Fact.- with new
SG-PCIE8SAS-E-Z ----
by ATO
possible.
Raid Contr. Ext SAS (2port x4 line) PCI-e 4
X-option with
SGXPCIESAS-R-EXT-
X-option new Server ----
Z Max. 2 per Domain! order by ATO
PCI-e
possible.
Solaris 10 Update 6 or future necessary!
SG-PCIESAS-R-EXT- Fact.-
---- ----
Z Integrat. RAID levels 0, 1, 10, 1E, 5, 6, 50, 5EE, 60
4
Flash Accelerator F20 PCIe Card X-option with
XTA-FAS-S3IE96GB X-option with 96 GByte Flash Memory new Server ----
PCI-e order by ATO
possible.
---- Integrat.
---- ----
Console Connection
For APL a personal computer (PC) or workstation is required for system control and maintenance work. This console must be
setup prior to installation of APL.
The XSCF is accessed using this console. The console ports of each partition are accessed via XSCF. XSCF and the console
need to be connected via LAN.
If you forget the XSCF-sign on password, you will need to connect to XSCF via RS-232C for recovery.
The customers console terminal should meet the following conditions.

 https (or http) and ssh (or telnet) available (for details, see the following specifications).
 The terminal needs to be placed within 15 m from the server.
 A maintenance account (account for field engineer privileges) for field engineers set up in advance. (For details on
account creation, see “eXtended System Control Facility User’s Guide”.)
Where the customer has no prepared terminal, or the field engineer cannot use the terminal prepared by the customer, approval
to use the field engineer’s own PC should be gained from the customer.
Field engineers can connect their own PC to the XSCF via XSCF-LAN or RS-232C. (XSCF-LAN is used as standard. However,
in special cases, if XSCF-LAN is not available or the XSCF-sign on password needs initialization, RS-232C is used.)
Console connection example (field engineer uses a terminal setup by customer)
Console connection example (field engineer uses a terminal setup by customer and the console path is duplicated)
Note: For the HUB in the pictures our LAN Switch (Loose delivery: D:GP70F-AL21-L / Factory integration: S26361-F3417-E1)
can be ordered.
Console connection example (Field engineer connects temporarily a PC via LAN (shown as blue line) or RS-232C (shown as
dotted line) as required to provide maintenance)
Note: For the HUB in the picture our LAN Switch (Loose delivery: D:GP70F-AL21-L / Factory integration: S26361-F3417-E1)
can be ordered.
Console connection example (the console path is duplicated. Field engineer connects temporarily a PC via LAN (shown as
blue line) or RS-232C (shown as dotted line) as required to provide maintenance)
Note: For the HUB in the picture our LAN Switch (Loose delivery: D:GP70F-AL21-L / Factory integration: S26361-F3417-E1)
can be ordered.
Specifications for the PC (or the workstation, etc.)

Description Remarks
CPU Pentium3 1 GHz or greater Equivalent CPUs i.e.
SPARC AMD are suitable.
Memory 512 MB or greater
OS Windows XP One of the OS listed
Windows2000 on the left is required.
RedHat Linux
Solaris
I/O CD-ROM/DVD-ROM (either internal or external device is available)
LAN (1000Base-T, 100Base-TX, or 10Base-T)
RS-232C (not necessarily required)
Browser Microsoft (R) Internet Explorer 6.0 or later One of the browsers
Netscape Navigator (TM) 7.0 or later listed on the left is
Mozilla 1.7 or later required.
Terminal Solaris Secure Shell One of the software
software Open SSH items listed on the left
(SSH) Other terminal software with equivalent function is required to use SSH
via LAN
Terminal Hyper terminal One of the software
software Other terminal software with equivalent function items on the left is
(RS-232C) required to use RS-
232C connection
Connection type Cable type Number of cables used Remarks

LAN via hub / switch twisted-pair cable duplexed XSCF-LAN: 3 Purchased
D:GP70F-AL21 (category 5 UTP cable) simplexed XSCF-LAN: 2 separately
D:GP70F-AL21- TPCBL-B005
L
S26361-F3417-
E1
direct Fast Ethernet direct cable: simplexed XSCF-LAN: 1 Purchased
connection DCBL-FEA05 separately
RS-232C RJ45 - DSUB9 pin, inch screw, 1 Attached to
(not necessarily female: DCBL-RSD05 the server
required)
* Before ordering cables check the product ID and length for suitability of configuration.
Ethernet Cables
Cables for Ethernet 1000 Base TX
Product Number Description Remarks

Cable only for Rack internal use if both targets are in a
common rack!
S26361-F3417-E500 UTP cat 5 enhanced, customized length Please order “Factory integration” !
UTP category 5 enhanced patch cable for Gbit Ethernet
(1000Base-T) to connect controllers with a hub or switch.
S26361-F3417-L505 UTP cat 5 enhanced, 05m
UTP category 5 enhanced patch cable for Gbit Ethernet
(1000Base-T) to connect controllers with a hub or switch.
S26361-F3482-L5 UTP cat 5 enhanced IC-cable, 5m Lose UTP category 5 enhanced crossover cable for Gbit
Ethernet (1000Base-T) to make direct connection
S26361-F3482-E5 UTP cat 5 enhanced IC-cable, 5m Verbau
between Ethernet controllers in a two node configuration
Cables for Ethernet 1000 Base SX

Please buy optical cables locally.
Partitioning
SPARC ENTERPRISE M5000 supports partitioning in which a single server can be divided into multiple independent systems.
 Partitioning creates multiple independent systems which are called partitions or domains.
 The basic hardware resource required for partitioning is a Physical System Board (hereafter referred to as PSB).
A PSB consists of a motherboard with or without connection to an IOU.
 A PSB can logically be divided into four parts. In this case it is called a Quad-XSB.
A PSB without such a division is called a Uni-XSB.
 The physical unit configuration of each divided PSB part is called eXtended System Board (XSB).
 Partitions can be configured to form a domain using any combination of XSBs. XSBs divided with Uni-XSB and Quad-
XSB can be mixed together within one domain.
 The XSCF is used to configure a partition and specify the PSB division type.
 Up to 4 partitions are supported.
 A minimum of one system hard disk drive per partition is necessary as a boot device.
PSB Division Types:

1) Uni-XSB
The motherboard is divided into two physical system boards (PSB). Each PSB represents an own logical system in UNI-
XSB format. The entire motherboard cannot be used as a single PSB.
Uni-XSB is equivalent to the PSB definition for PRIMEPOWER.
Division Type: Uni-XSB
The two PSBs are not divided and used as two logical system boards (SB).
CPU chips, memory, PCI slots, hard disk drives assigned to XSB are predetermined.
Mount as a minimum one CPU module and two MEM modules per operating XSB.
If only one partition is configured with both PSBs in Uni-XSB mode but no CPU- and MEM-modules are mounted on
PSB#1, then HDDs and PCI slots on the additional I/O board cannot be used (Areas shaded black in the figure below are
not equipped with CPU- and MEM-modules).
2) Quad XSB
Because Quad-XSB allows configuring several partitions in units of individual CPU chips (two cores) it is the optimized way
to create small partitions.
Quad-XSB is equivalent to the XSB definition for PRIMEPOWER.
Division Type: Quad-XSB
PSB (consists of 1/2 motherboard and an I/O board) is divided into four partitions with 1 CPU chip and a set of memory
(8 DIMMs each).
PSBs can be divided into XSBs (XSB#0-0, XSB#0-1, XSB#1-0, XSB#1-1) with connections to an I/O board and XSBs
(XSB#0-2, XSB#0-3, XSB#1-2, XSB#1-3) without connections to an I/O board. CPU chips, memory, PCI slots and disks are
permanently assigned to the XSBs as shown in the diagram above.
XSBs without connection to an I/O cannot be configured as an autonomous partition (refer to “8-4 Notes on
Configurations” for details).
Example for four partitions configured with two XSBs.

3) Combination of Uni-XSB and Quad-XSB

PSBs divided into Quad-XSBs can be mixed together with Uni-XSB to configure a common partition. There is no difference
in settings and conditions for partitions configured with Uni-XSB only or Quad-XSB only. This option is useful if only a
partial memory mirroring within a certain partition is required but Uni-XSB-type XSB is too large to do so.
PAR#0 in the following example is a partition configured by using both Uni-XSB and Quad-XSB.
CPU Module
Product Overview
TM TM
SPARC ENTERPRISE M5000 servers use SPARC64 VI or SPARC64 VII processors, which are multi-core/multi-
threading CPUs. Each module contains two CPU chips. Up to four CPU modules can be installed in SPARC
ENTERPRISE M5000.
Appearance
CPU module for M4000/M5000 CPU module without cover viewed from the reverse side
Features
TM
90 nm copper wiring CMOS technology is used for SPARC64 VI and 65 nm copper wiring CMOS technology is used
TM
for SPARC64 VII processors to provide high performance while achieving low power consumption.
CMT (Chip Multi-Threading) technology provides multi-thread processing that virtualizes each CPU core as two or four
threads.
The use of register renaming, out-of-order execution and non-blocking cache memory ensures high parallel-processing
performance.
TM
These modules offer mainframe levels of reliability inherited from SPARC64 V.
 • Data in both primary and secondary caches are protected by ECC (Error Checking and Correction).
 • Registers and ALU are protected by parity.
 • If an error occurs, the hardware re-executes the instruction that triggered the error.
(Not all errors are covered by this feature.)
 • If recoverable errors occur frequently in cache, hardware-set degrade mode is automatically invoked.
Specifications
Items Specifications Remarks
TM TM
CPU Type SPARC64 VII SPARC64 VI
Frequency 2.53 GHz 2.4 GHz 2.15 GHz
Primary cache Instructions: 64 KB Instructions: 128 KB per core
data: 64 KB data: 128 KB
Secondary cache Both the Both the Both the instruction and data: per CPU (2
instruction instruction 5 MB cores)
and data: 5.5 and data: 5
MB MB
Expansion unit 1 CPU module 1 CPU module
(2 CPU chips, 8 cores) (2 CPU chips, 4 cores)
Target servers SPARC ENTERPRISE M4000
SPARC ENTERPRISE M5000
M5000 CPU Product ID List

Dual-processor Modules

TM
MR 2x 2.1GHz SPARC64 VI processor 2 per M4000
SELX1A1U SELY1A1U
module. 4 per M5000
Mixing of
TM
SPARC64 VII
TM
TM with SPARC64 VI
MR 2x2.4GHz SPARC64 VII processor 2 per M4000
SELX1B1U SELY1B1U is possible.
module 4 per M5000
LOD: 30.11.2009
Mixing of
TM TM
MR 2x2.53GHz SPARC64 VII processor 2 per M4000 SPARC64 VII
SELX1C1U SELY1C1U TM
module 4 per M5000 with SPARC64 VI
is possible.
For all slots where
no CPU option is
SELY9CF1U ---- SE M4_M5000 CPU-Modul Filler Panel ordered, this Filler
Panel is
mandatory
Purchase “Factory-installed modules” if you need the CPU modules installed and shipped inside the server.
“Field expansion modules” are always shipped uninstalled even if they are purchased together with the server.
Additional Memory Module

Product Overview
SPARC ENTERPRISE M5000 memory module is an expansion memory device consisting of memory DIMMs and a
memory controller equipped on a board that can be plugged to the motherboard. There are 8 GB, 16 GB, and 32 GB
additional memory module types with eight DIMMs each or 4 DIMMs each which can be added as a set. Mounting of
additional memory modules must be performed under specific conditions. For details on how to add memory refer to
“Conditions for Mounting Additional Memory”.
Appearance
Memory Module Memory module without a cover

(Memory module: 8 DIMMs are always mounted)
Features
(1) 2 GByte / 4 GByte DDR2 SDRAM (Double Data Rate Synchronous Dynamic Random Access Memory) is used to
provide high-speed access.
(2) High-density DIMMs (Dual Inline Memory Module) are used to save space on the motherboard.
(3) ECC (Error Checking and Correction) functions provide higher system reliability.
(4) If a single memory chip on a DIMM fails completely, it is handled as a single-bit error. This technique drastically reduces
the number of system shutdowns caused by memory failures.
(5) Memory mirroring function enables continued operation even when an uncorrectable error (multi-bit error) occurs.
(6) When memory failure is detected at initial diagnosis or during OS operation, Block Degradation or Area Degradation
occurs. Because the area to be degraded is designed to be a controllable minimum area, other areas remain intact.
Thus, operation can continue/resume using these areas. This minimizes the effects of failures.
(7) MEM controller patrols memory during normal operation independently from the CPU and OS. This hardware can detect
an error and degrade the area before either the OS or an application is affected. This procedure doesn’t have any effect
on other operations.
M5000 Memory Product ID List
Marketing P/N Marketing P/N

Maximum Number
Without factory Factory Option Description
Supported
integration! integration only!
MR memory expan. 4GB (1 sets4x1GB
SELX2EX1U DIMMs)
1 per SELY2E1U or
LOD: ---- Only for upgrading SELY2E1U or
SELX2E1U
26.06.2009 SELX2E1U.
(1 Rank technology)
SELX2E1U SELY2E1U MR memory board 4GB (1 sets4x1GB
4 per M4000
LOD: LOD: DIMMs)
8 per M5000
26.06.2009 26.06.2009 (1 Rank technology)
SELX2A1U SELY2A1U 8GB MR with server memory board and
4 per M4000
LOD: LOD: 8x 1GB DIMMs.
8 per M5000
26.06.2009 26.06.2009 (1 Rank technology)
SELX2B1U SELY2B1U 16GB MR with server memory board and
4 per M4000
LOD: LOD: 8x 2GB DIMMs.
8 per M5000
20.02.2009 10.12.2008 (2 Rank technology)
8GB (1 set4x2GB DIMMs, 1Rank)
4 per M4000
SELX2F2U SELY2F2U MR memory board 8GB (1 sets4x2GB
8 per M5000
DIMMs)
exp. 8GB(1set4x2GB DIMMs,1Rank)
MR memory expan. 8GB (1 sets4x2GB
1 per SELY2F2U or
SELX2FX2U ---- DIMMs)
SELX2F2U
Only for upgrading SELY2F2U or
SELX2F2U.
16GB MEM(2sets4x2GB DIMMs,1Rank)
4 per M4000
SELX2B2U SELY2B2U MR memory board 16GB (2 sets4x2GB
8 per M5000
DIMMs)
4 per M4000
SELX2C1U SELY2C1U MR memory board 32GB (2 sets4x4GB
8 per M5000
DIMMs)
4 per M4000
SELX2D1U SELY2D1U MR memory board 64GB (2 sets4x8GB
8 per M5000
DIMMs)
2 per M4000
6 per M5000
For all slots where
---- SELY9UF1U SE M4_M5000 MEM Filler Panel no memory option
is ordered, this
Filler Panel is
mandatory
Purchase “Factory integration only” modules if you need the memory modules installed and shipped inside the server.
“Without factory integration” means modules are always shipped uninstalled even if they are ordered with the server.
Notes on Memory ordering and mounting:

 Basics: Motherboard of M5000 includes two physical system boards by default.
 One, two or four memory modules can be mounted on a physical system board. Three memory modules per physical
system board are not allowed.
Attention:
If only one memory module per physical system board is connected to be aware of the risk in case:
- Within a memory error by POST there is a possibility for totally degradation of the Partition.
- Of uncorrectable memory errors by OS. In such a case the partition will panic and will not be bootable
again, until the memory fault is solved.
- If reconfigured to quad-XSB the CPU module, which is placed in a XSB without memory, will be
disabled, same as a memory module, which is placed without CPU will be disabled.
 If Memory Modules are installed on the second physical System Board a CPU-module on this PSB is mandatory and vice
versa.
 If a second internal I/O-tray is installed, at least one CPU-module and one Memory module on the second physical
System Board are mandatory.
 All memory modules per physical system board in Uni-XSB-Mode must include the same DIMM’s in Group A and the
same DIMM’s in Group B.
DIMM’s in Group A must be identically or bigger as the DIMM’s in Group B.
Memory Modules without DIMMs in Group B are allowed (only with orderable modules half populated DIMMs), Group A
on a memory module have to be populated.
For Quad-XSB-Mode the same DIMMs rule are recommended, but not mandatory. If do not observe the rule in Quad-
XSB-Mode, a switch to Uni-XSB-Mode can be have problems like errors or degradation of DIMM’s.
 Min of 1 memory module per processor in Quad XSB Mode is mandatory.
Logical diagram of memory locations
Motherboard
Memory Board #0 I/O-Board
(base)
MEM#0B
MEM#3B
MEM#1B
MEM#2B
MEM#1A
MEM#2A
MEM#0A
MEM#3A
CPU
Chip #0 Slots for:
HDD#0
CPU Modul #0 HDD#1
Memory Board #1
MEM#0B
MEM#3B
MEM#1B
MEM#2B
MEM#1A
MEM#2A
MEM#0A
MEM#3A
CPU DVD-ROM
Chip #1
DAT
SB#0 Gigabit Ethernet

Memory Board #2
Gigabit Ethernet
MEM#0B
MEM#1B
MEM#3B
MEM#2B
MEM#2A
MEM#0A
MEM#1A
MEM#3A
CPU
PCI-X
Chip #2
PCI-Express
CPU Modul #1 PCI-Express
Memory Board #3
MEM#0B
MEM#1B
MEM#3B
MEM#2B
MEM#2A
MEM#0A
MEM#1A
MEM#3A
PCI-Express
CPU PCI-Express
Chip #3
Group A Group B
Memory Board #4 I/O-Board

(optional)
MEM#0B
MEM#3B
MEM#1B
MEM#2B
MEM#1A
MEM#2A
MEM#0A
MEM#3A
CPU
Chip #4 Slots for:
HDD#2
CPU Modul #2 HDD#3
Memory Board #5
MEM#0B
MEM#3B
MEM#1B
MEM#2B
MEM#1A
MEM#2A
MEM#0A
MEM#3A
CPU
Chip #5
SB#1 Gigabit Ethernet

Memory Board #6 Gigabit Ethernet
MEM#0B
MEM#1B
MEM#3B
MEM#2B
MEM#2A
MEM#0A
MEM#1A
MEM#3A
CPU
PCI-X
Chip #6
PCI-Express
CPU Modul #3 PCI-Express
Memory Board #7
MEM#0B
MEM#1B
MEM#3B
MEM#2B
MEM#2A
MEM#0A
MEM#1A
MEM#3A
PCI-Express
CPU PCI-Express
Chip #7
Group A Group B
Mounting Conditions for Memory with different sizes

Condition 1:
While memory boards can only sell with same DIMM types, for memory mix intend it makes sense to order parity piece of
memory board with different DIMM types, like one board with fist DIMM type and one board with second DIMM type or two
boards with fist DIMM type and two boards with second DIMM type, for a system board. Condition 2:
When mounting DIMMs to a specific group of a physical system board, the memory size must be identical within this
group. DIMMs of different memory sizes cannot be mounted within a group.
Condition 3:
Memory size in Group A must be greater than or equal to that in Group B.
Condition 4:
1 Ranked DIMMs and 2 Ranked DIMMs cannot be mixed within a Group.
Condition 5:
Ordering ATO Base Unit within ATO Factory:
ATO Factory are today only able to deliver Uni-XSB-Mode. So memory modules with different DIMM types by
delivering from ATO Factory are only possible within different physical system boards, on first system board first DIMM
type and on second system board second DIMM type.
For realize different DIMM types on one system board, it is mandatory to order the first type of DIMMs as a factory
included option and the second DIMM type for the same system board as an X-Option (not included by Factory). The
completions of the server have to be done on customer side.
These rules are true for mirrored and not mirrored memory configurations.
When mounting additional memory with different memory sizes transfer already-mounted DIMMs as necessary and
follow the above conditions.
Example of Memory Expansion for SB#0

Memory Mirroring
SPARC ENTERPRISE M5000 models provide hardware based memory mirroring to avert system downs even when multi-bit
errors are detected.
Features:
 Memory mirroring is available in both Uni-XSB and Quad-XSB configurations. In Quad-XSB configuration, however,
mirroring should be configured in units of four XSBs (the same size as with Uni-XSB configuration). Mirroring cannot be
configured using a single XSB.
 Mixed configurations of mirrored and unmirrored SB/XSB in one partition are supported (on M5000).
 Memory mirroring configuration is performed from the XSCF. For more information, refer to “eXtended System Control
Facility User’s Guide”.
 When mirroring is configured, the available memory capacity on each SB/XSB one-half of the total size.
 Mirroring is done within a group using combinations as shown below. Thus, the memory size in Groups A and B can be
different.
I/O Board
(also called I/O tray or I/O Unit (IOU))
Product Overview
The SPARC ENTERPRISE M5000 basic configuration contains one I/O board. A second I/O board can be added to
SPARC ENTERPRISE M5000.
Appearance
Features
 The I/O board provides four PCI-Express slots and one PCI-X slot.
 The I/O board has two on-board Gigabit Ethernet ports and SAS-connections to two hard disk drives.
*1
 The first I/O board has a connection to the DVD-drive and to the optional internal DAT drive .
*2
Specifications
Internal I/O Unit Are in base unit as standard.
On-board I/O 2x 1000Base-T*1 ports
Internal PCI slot 4 slots PCI-Express, each 8 lanes
1x PCI-X: 1 slot
Maximum number of HDDs Connection to 2 HDDs
*2
Internal optical drive Connection to 1x DVD drive
(DVD-ROM: 8X, CD-ROM: 24X)
*2
Internal tape device Connection to 1x DAT72
M5000 second I/O Board Product ID List

MR I/O Tray (4 PCIe and 1 PCI-X slots).
SEFX61U SEFY61U Up to 1 per M5000
Without factory integration!
System Architect
responsible.
---- SEFY61U- MR I/O Tray (4 PCIe and 1 PCI-X slots) Up to 1 per M5000 If ordered,
SEFY61U will be
delivered!
If no second I/O
Tray is ordered
---- SELY9EF1U SE M4_M5000 I/O Tray Filler Panel Up to 1 per M5000
this Filler Panel is
mandatory.
Note for chapter I/O Board

*1: Notes on LAN connection
LAN ports on the I/O Board and on LAN PCI Express cards belonging to the same partition have the same MAC
address by default. Therefore, do not connect them to the same subnet before you have changed the default MAC
address. You can assign unique MAC addresses to respective LAN ports by changing the OBP environment variable
“local-mac-address?” to “true”.
*2: DVD-ROM drive and the internal DAT drive cannot be connected to the expansion (second) I/O board of the SPARC
ENTERPRISE M5000.
I/O-BOX
Product Overview
The External I/O Expansion Unit (hereafter referred to as I/O Box) is a rack-mountable expansion unit used to expand the
server’s I/O connectivity with up to 12 PCI Express or PCI-X slots. Each I/O-box can contain two External I/O kits (hereafter
referred to as I/O boats) (giving 12 slots in total). Each I/O boat provides either six PCI Express or six PCI-X slots.
To connect to the I/O boat insert a Link Card into a PCI Express slot on the server and connect them with a cable kit.
Up to four I/O Boxes can be connected resulting in 48 external PCI slots for a M5000
Appearance (provisional):
Features
 Each I/O Box comes with one I/O boat for six PCI Express or six PCI-X slots as standard. By adding a second PCI
Express or PCI-X I/O boat the I/O Box can provide a maximum of 12 slots.
 There are two kinds of expansion I/O boats; PCI Express and PCI-X. Mixed I/O boat configuration is supported.
 Both PCI Express and PCI-X slot types support PCI HotPlug for I/O cards.
 Hot replacement and hot system expansion for each I/O boat is also supported.
 Each I/O Box has 1+1 redundant power supply units and supports single or dual power feed.
 Hot replacement for each power supply unit is supported.
 The I/O Box can be mounted in a 19-inch rack (4U).
Specifications
Slot type, In base PCI Express: 6 PCI-X: 6
number system
Maximum PCI Express: 12 PCI-X: 12 depending on the I/O
number or or boat types which are
PCI Express: 6 and PCI Express: 6 and mounted
PCI-X: 6 PCI-X: 6
Redundant components Power supply units, power system
Hot replaceable PCI cards, I/O boats, power supply units
components
Target servers M4000/ M5000
IO boat PCI Slot Specifications
I/O boat for PCI Express

PCI Bus Slot No. No. of Lanes Card Size
LINK0 for exclusive use with a Link Card
PCI Express PCIE1 8 L
PCIE2 8 L
PCIE3 8 L
PCIE4 8 L
PCIE5 8 L
PCIE6 8 L
I/O boat for PCI-X

PCI Bus Slot No. Bus Width Clock Rate Input Voltage Card Size
LINK0 for exclusive use with a Link Card
PCI-X PCIX1 64/32 bit 133 MHz 3.3 V/Universal L
PCIX2 64/32 bit 133 MHz 3.3 V/Universal L
PCI Bus: indicates the types of I/O boat.

LINK0: indicates slots where Link Cards, separately purchased PCI cards for connecting the server and the I/O Box,
are mounted.
No. of Lanes: indicates the width of PCI Express slot lane and shows eight lanes are supported.
Bus Width: shows PCI slots support a 64-bit width, and any PCI card with a 64-bit or 32-bit width can be used.
Clock Rate: indicates operating frequencies supported by each PCI slot. When a 133 MHz operable PCI card is installed,
the clock rate becomes 133 MHz.
Input Voltage: indicates the voltage levels of PCI cards that can operate in the slot. 3.3 V PCI cards and universal PCI
cards (PCI cards that can work at either 3.3 V or 5 V) can be mounted in any slot. PCI cards that only work
in 5 V slots cannot be used.
Card Size: S indicates short length PCI cards and L indicates long length PCI cards can be installed.
Connection Types (example)
Connection between server and I/O Box is realized by Fibre or Copper Link Card Kit (Link Card) and a dedicated cable
set (Link cable). Insert the Link Card in a PCI Express slot on the server.
Cascade connection of I/O boats is not supported.
Expansion
M5000: Up to 4 external I/O Boxes with 2 boats each are connectable (second internal IOU must be installed for third
and fourth external I/O-Box). Each I/O boat is connected directly to the server and occupies one PCI-express slot in
internal IOU.
M5000 external I/O-Box Product ID List

I/O-Box orders are handled only as PTO until further notice! Same order procedure as before!
Marketing P/N
Marketing P/N Factory
Without factory integration in Option Description Comments
integration! I/O Expansion
Unit only!
PCI-Express External I/O Expansion Unit, w. 2x PSUs, w 1
PCI-E Boat, ROHS-6 FTS Ext I/O Exp Unit, 1
SENY8BE1S
If “Factory integration” will be accomplished or not PCI-E
depends on order sequencing!
PCI-E IO-Boat for I/O
SENX8TE1U SENY8TE1U PCI-Express IO-Boat for External I/O Expansion Unit, ROHS-6
Exp Unit
1x copper Link card Kit (2 boards + 2 x 4M copper cables) for
SELX8LK1U SELY8LK1U copper Link Card Kit, 4 M
External I/O Expansion Unit.
1x Optical Link card Kit (2 boards + 2 10M optical cables) for Optical Link Card Kit, 10
SENX8LK2U SENY8LK2U
External I/O Expansion Unit. M
1x Optical Link card Kit (2 boards + 2 x 25M optical cables) for Optical Link Card Kit, 25
SENX8LK3U SENY8LK3U
External I/O Expansion Unit. M
1x Optical Link Cable Set (10m optical cable) for External I/O Optical Link Cable only,
SENX8FC1U ----
Expansion Unit. 10m
1x Optical Link Cable Set (25m optical cable) for External I/O Optical Link Cable only,
SENX8FC2U ----
Expansion Unit. 25m
PCI-X External I/O Expansion Unit, w. 2x PSUs, w 1 PCI-X

Boat, ROHS-6 FTS Ext I/O Exp Unit, 1
If “Factory integration” will be accomplished or not PCI-X
SENY8BX1S
depends on order sequencing! currently, without
Current Status: To order a PCI-X I/O-Box a Request for Controller support!
Special Release is necessary!
PCI-X IO-Boat for I/O
PCI-X IO-Boat for External I/O Expansion Unit, ROHS-6
Exp Unit
SENX8TX1U SENY8TX1U Current Status: To order a PCI-X I/O-Boat a Request for
currently, without
Special Release is necessary!
Controller support!
Notes:
- To connect to a server each I/O boat requires its own Link Card Kit. The Link Card Kits are not included in the basic I/O
Box configuration and must be purchased separately.
- It is not supported to connect the two IO boats within one I/O-Box to different servers. If two I/O boats are equipped they
have to be connected to the same server.
- The two IO-boats within an IO-Box may be connected to PCIe-slots inside the server, which belong to different partitions,
independent if they are running in Uni-XSB mode or Quad-XSB mode.
Important:
Rules on following pages apply independently for ATO or none ATO. Therefore, the table columns with
special ATO information’s were omitted.
External storage units for M5000

External storage units for HDDs or MTC drives (differential SCSI)
FibreCAT SX40
The FibreCAT SX40 is the extension to the FibreCAT SX family by a reliable, user-friendly and cost-effective entry-level
system. The FibreCAT SX40 with its future-oriented SAS technology is positioned as a passive storage subsystem
(JBOD=just a bunch of disks) in the Direct Attached Storage (DAS) segment for the SME market.
The FibreCAT SX40 storage system with its SAS technology enables flexible expansion with powerful and highly available hard
disks as storage requirements grow.
Up to 12 SAS hard disks offer a total maximum capacity of 5,4Tbytes in a 2U high external housing. Cascading of up to 2
FibreCAT SX40 via the second SAS x4 port permits expansion to a maximum of 10,8 Tbytes of external hard disk capacity.
In the FibreCAT SX40 storage subsystem, the active components – hot-plug hard disk drives and hot-plug power supply
modules – can be replaced while the server is running. The redundant hot-plug power supply units can be connected with phase
redundancy via separate power lines. Optimum and secure cooling of the hard disks is ensured by two independent fans in
each power supply unit.
Important Note:
Dual Port and Path configurations are not supported!
The FibreCAT SX40 for SES is only released connected to the Host’s Raid-Controller and only with SAS HDDs!
Order numbers
For SES released EXTERNAL PCIe Raid Controller
SG(X)PCIESAS-R-EXT-Z Raid Contr. Ext SAS(2port x4line) (for quantity see chapter “SAS Host Bus Adapters”)
FibreCAT SX40 base box and cascading box

S26361-K1122-V200 Base unit: SAS Disk Subsystem 2U (JBOD) Case incl.,
 1 x SAS input/output module,
 2 x hot replaceable PS/FAN module incl. power cords
SX40 SAS Hard Disk drives

S26361-F3244-E/L573 3.5" HD 73GB 15krpm
S26361-F3244-E/L514 3.5" HD 146GB 15krpm
S26361-F3244-E/L530 3.5" HD 300GB 15krpm
S26361-F3244-E/L545 3.5" HD 450GB 15krpm
For SES released cables

S26361-F3246-L203 SAS Mini-SAS – IB 2m
S26361-F3246-E870 SAS Mini-SAS – IB Customized length
T26139-Y3975-C50 Daisy Chain cable (0,5m)
Supported RAID level

RAID-Level 0, 1, 10, 5, 50
OS Rules
>= SOL 10U6
Driver SUNWaac (VERSION: 11.10.0,REV=2008.08.11.23.56) included
The supplied Raid-Controller CD includes StorMan (VERSION: >= 5.50) and the Raid Controller documentation.
The latest version is downloadable at the Extranet (see PCI-Controller link)
FibreCAT SX40 Links

http://ts.fujitsu.com/products/standard_servers/storage/fibrecat_sx40.html
SES Links
Service:
https://partners.ts.fujitsu.com/com/service/SPARCEnterprise/Pages/default.aspx
Hardware:
https://partners.ts.fujitsu.com/com/service/SPARCEnterprise/Hardware/Pages/default.aspx
PCI-Controller:
https://partners.ts.fujitsu.com/com/service/SPARCEnterprise/Hardware/PCI-Controller/Pages/default.aspx
FibreCAT TXF rack mountable peripheral Expansion unit for accessible devices
FibreCAT TXF is a flexible, high available and service friendly 3U rack enclosure for up to 4 half high (HH) backup devices with
SCSI or SAS interface. The enclosure can be installed with one SCSI or SAS input/output module (IOM) with 4 external
connectors (to server’s host bus adapters) and internal connectors to devices. Each IOM provides power management
functionality and supervision/identification of drives, PSU, additional fan, drive and enclosure temperature. Front panel is build
with "warm replace/easy click" functionality. SAS / SCSI mix is not possible in one TXF.
Order numbers
For Order numbers of FibreCAT TXF its self and standard additional options please refer to the TXF own configuration diagram:
https://sp.ts.fujitsu.com/dmsp/docs/cnfgtxf.pdf
For SPARC Enterprise Server the supported drives, the connection cables, the box internal cables and the PCI Host Bus
Adapter are different to the supported options for PRIMERGY. So please use for SPARC Enterprise supported options below:
FibreCat TXF BASE

S26361-K1228-V100 FibreCAT TXF 19" basic unit 3U for max 4 HH 5.25" backup devices
For SES released drives

S26361-F2848-E31 EOL MBK DAT DDS72 (HP) 36GB, 3MB/s, U2W SCSI, max. 4x per TXF
S26361-F3157-E3 EOL Tape drive LTO2HH Ultrium 200GB, 24MB/s, U160 SCSI, max. 4x per TXF
S26361-F3225-E3 / L3 successor MBK DAT160 DDS Gen6 (160GB)
S26361-F3459-E3 / L3 successor Tape drive LTO3HH Ultrium
NOTE:
Restrictions:
With Drive S26361-F3225-E3 dont use blocksizes <=16Byte and >=16Mbyte
With Drive S26361-F3459-E3 dont use blocksizes >= 2MByte
For SES released external SCSI cables

SNP:SY-F2365E500-P External SCSI cable 2x UHD68(S) customized lengths for optimized rack integration
SNP:SY-F2365L20-P External SCSI cable 2,0m, 2x UHD68(S)
SNP:SY-F2365L50-P External SCSI cable 5,0m, 2x UHD68(S)
TXF internal SCSI IOM / SCSI cable

S26361-F3872-E110 SCSI I/O module, Input module with 4 UHD68 (S) external ports
S26361-F3872-E111 SCSI CABLE KIT P2P UHD, point-to-point, must be 1x / SCSI drive (max. 4x per TXF)
S26361-F3872-E112 SCSI CABLE KIT DC UHD, daisy chain, must be 1x / 2x SCSI drive (max. 2x per TXF)
SES SCSI HBA

SG-(X)PCIE2SCSIU320Z SCSI LVD, U320, 2port HBA
SES SAS HBA

SG-XPCIE8SAS-E-Z 8 Port SAS, 2connector PCIe Hostbusadapter
(Only 1 SAS port(line) on each connector can be used, only 1 device allowed on this line!)
TXF internal SAS IOM / SAS cable

S26361-F3872-E120 SAS I/O modul Input modul with 4 SAS SFF 8088 external ports
S26361-F3872-E121 SAS CABLE KIT P2P SAS-SAS must be 1x / SAS drive (max. 4x per system)
For SES released SAS drives

S26361-F3963-E3 / L3 Tape drive LTO4 SAS HH Quantum
For SES released external SAS cable:

S26361-F3246-E880 SAS CBL EXT Customized length 8088-8088
S26361-F3246-L402 SAS CBL EXT 4m 8088-8088
OS rules
For SCSI TXF >= SOLARIS 10 8/07 (U4)
For entries in /kernel/drv/st.conf add pkgadd SMAWdevsp (SW package from ESF extended DVD)
For SAS TXF >= SOLARIS 10 5/08 (U5). No additional patch necessary.
FibreCAT TXF LINKS
FibreCAT TXF
http://ts.fujitsu.com/products/standard_servers/storage/fibrecat_txf.html
FibreCAT TXF Technical overview

http://docs.ts.fujitsu.com/dl.aspx?id=580aae3e-1f07-43f6-89f1-c0bea94eb0b6
FibreCAT TXF data sheet

https://sp.ts.fujitsu.com/dmsp/docs/ds-fibrecat-txf-en.pdf
Service clearance
Service clearance
rear side 800 mm
19-inch rack 1100 mm
Service clearance
front side 900 mm
800 mm 700 mm 800 mm

M5000 Connectivity
Please refer also to:
SPARC Enterprise Server and UPS (Uninterruptible Power Supplies)
https://partners.ts.fujitsu.com/com/products/servers/unix/Pages/default.aspx
Powertool
https://partners.ts.fujitsu.com/com/products/servers/unix/Config%20and%20Tools/SES%20Powerconfig/Pages/default.aspx
Available and supported external storage peripherals

http://partners.ts.fujitsu.com/com/products/storage/Pages/default.aspx
PRIMEPOWER Open Connectivity (incl. IHV Support Matrix)

http://partners.ts.fujitsu.com/com/products/servers/primergy/conftools/MatrixEP/MatrixEP/Pages/default.aspx
PRIMECENTER Rack
http://partners.ts.fujitsu.com/com/products/servers/primergy/rackcomp/racks/Pages/default.aspx
System Architect PRIMEPOWER (PW) Hotline

For further questions related on configurations of SPARC Enterprise Servers with SYSTEM-ARCHITECT do not hesitate to get
in contact with System Architect PRIMEPOWER (PW) Hotline:
Mail to: cc.unix@ts.fujitsu.com
Please add the respective configuration file (SAR-FILE)!
Further information and contacts

Mail to: unix-pm@ts.fujitsu.com
Contact:
Mail to: Franz-Josef.Risse@ts.fujitsu.com
All rights reserved, including intellectual property rights. Technical data subject to modifications and Published by department: Company stamp
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded. Designations may be trademarks and/or copyrights of the respective Enterprise Server Products
manufacturer, the use of which by third parties for their own purposes may infringe the rights of such Product Management
owner. For further information see http://ts.fujitsu.com/terms_of_use.html Phone: ++49 5251 525-2511
Copyright © 2005-2008 Fujitsu Siemens Computers Fax: ++49 5251 525-32-2511
Copyright © 2009 Fujitsu Technology Solutions franz-josef.risse@ts.fujitsu.com
http://ts.fujitsu.com

PF Se m5000 Configuration Diagram

Uploaded by

Copyright:

Available Formats

PF Se m5000 Configuration Diagram

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PF Se m5000 Configuration Diagram

Uploaded by

Copyright:

Available Formats

Issue November 2010

SPARC Enterprise Server Product SPARC Enterprise M5000

SPARC Enterprise M5000 Configuration Diagram

Important Hint for ATO orders:

Recommended 19"- rack PRIMECENTER 2 with 1100 mm depth

Overview M4000 and M5000

(*Software support & consideration on configuration are required;

Power Supply Units

CPU CPU CPU CPU

1 G-bit LAN Contr. PCI-e 1 G-bit LAN Contr. PCI-e

MEM MEM MEM MEM MEM MEM MEM MEM M e m o ry

MEM MEM MEM MEM MEM MEM MEM MEM M e m o ry

MEM MEM MEM MEM MEM MEM MEM MEM M e m o ry

MEM MEM MEM MEM MEM MEM MEM MEM

Fibre Channel 4Gb Fibre Channel 4Gb

Second (Internal) I/O Board (optional) : PCI-e (8 lane) .. ..

2 internal disk bays (standard),

10 G-bit LAN Contr. PCI-e 10 G-bit LAN Contr. PCI-e

SEN[YX]8BE1S I/O Expansion (PCI) Box (with 1 PCI-Express boat as standard)

First Boat Standard

Second Boat optional; SEN[YX]8TE1U as PCI-Express OR

I/O Expansion (PCI) Box (with 1 PCI-X boat as standard)

First Boat Standard Link Card Kit optional

Fibre Channel 4Gb Fibre Channel 4Gb

First Boat Standard

PCI PCI PCI

Slot Slot Slot Slot Slot Slot

Second Boat optional; SEN[YX]8TE1U as PCI-Express OR SEN[YX]8TX1U as PCI-X

SEN[YX]8BE1S I/O Expansion (PCI) Box (with 1 PCI-Express boat as standard)

First Boat Standard Link Card Kit optional

Second Boat optional; SEN[YX]8TE1U as PCI-Express OR SEN[YX]8TX1U as PCI-X

Product Overview SPARC Enterprise M5000

Notes for Picture:

5. Very flexible partitioning functions are provided.

7. Remote Customer Support

9. The DR (Dynamic Reconfiguration) functions are supported.

10. Configuration Diagram of the Main Unit

11. Hardware for M5000

ATO M5000 Server Product ID List

PART NUMBER LONG DESCRIPTION SHORT Planned Last

ATO M5000 COD (Capacity on Demand) Server Product ID List

PART NUMBER LONG DESCRIPTION SHORT Planned Last

As minimum to each COD Server 2 CPU RTU (Right To

As minimum to each COD Server 2 CPU RTU (Right To

As minimum to each COD Server 2 CPU RTU (Right To

PART NUMBER LONG DESCRIPTION SHORT Planned Last

M5000 Internal Storage Device Product ID List

Marketing P/N Marketing P/N Maximum Number

M5000 Filter Product ID List

Marketing P/N Marketing P/N Maximum Number

SEFX9FL1U ---- M5000 air filter kit 1 per system

M5000 Power Cords for Rack internal use Product ID List

Power Cord, SELX9P71U

For System Base Units!

Socket strip 1x 10 jacks IEC320 C13 S26361-F2262-E40

Socket strip 3phase 3x 8 jacks S26361-F2262-E31

Socket strip Rack mount Kit 2U S26361-F2262-E301

Rack integration order numbers

Power Cords for PSU connection directly to Rack external Jacks: