ASTM Volume 04.

03, June 2010

Road and Paving Materials; Vehicle-Pavement Systems

Table of Contents

Standard Number Title

1 D0005-06E01 Test Method for Penetration of Bituminous Materials

2 D0008-02 Terminology Relating to Materials for Roads and Pavements
3 D0020-03R09 Test Method for Distillation of Road Tars
4 D0070-09E01 Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
5 D0075_D0075M-09 Practice for Sampling Aggregates
6 D0098-05 Specification for Calcium Chloride
7 D0113-07 Test Method for Ductility of Bituminous Materials
8 D0139-07 Test Method for Float Test for Bituminous Materials
9 D0140_D0140M-09 Practice for Sampling Bituminous Materials
10 D0242_D0242M-09 Specification for Mineral Filler For Bituminous Paving Mixtures
11 D0243-08 Test Method for Residue of Specified Penetration
12 D0244-09 Test Methods and Practices for Emulsified Asphalts
13 D0345-02 Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
14 D0402-08 Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
15 D0448-08 Classification for Sizes of Aggregate for Road and Bridge Construction
16 D0490-92R05 Specification for Road Tar
17 D0517-98R08 Specification for Asphalt Plank
Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and
18 D0545-08
Resilient Types)
19 D0546-05 Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
20 D0633-97R05 Volume Correction Table for Road Tar
21 D0692_D0692M-09 Specification for Coarse Aggregate for Bituminous Paving Mixtures
22 D0946_D0946M-09A Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
23 D0977-05 Specification for Emulsified Asphalt
24 D0979-01R06E01 Practice for Sampling Bituminous Paving Mixtures
25 D0994-98R03 Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
26 D1073-07 Specification for Fine Aggregate for Bituminous Paving Mixtures
27 D1074-09 Test Method for Compressive Strength of Bituminous Mixtures
28 D1075-07 Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
29 D1139_D1139M-09 Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using
30 D1188-07
Coated Samples
Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components,
31 D1195_D1195M-09
for Use in Evaluation and Design of Airport and Highway Pavements
Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement
32 D1196-93R04
Components, for Use in Evaluation and Design of Airport and Highway Pavements
33 D1369-84R06 Practice for Quantities of Materials for Bituminous Surface Treatments
34 D1461-85R06 Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of
35 D1560-09A
Hveem Apparatus
Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading
36 D1561-92R05E01
Compactor
37 D1665-98R09 Test Method for Engler Specific Viscosity of Tar Products
Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural
38 D1751-04R08
Construction (Nonextruding and Resilient Bituminous Types)
Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for
39 D1752-04AR08
Concrete Paving and Structural Construction
40 D1754_D1754M-09 Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
41 D1856-09 Test Method for Recovery of Asphalt From Solution by Abson Method
42 D1985-03R08 Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
43 D2026-97R10 Specification for Cutback Asphalt (Slow-Curing Type)
44 D2027-97R04 Specification for Cutback Asphalt (Medium-Curing Type)
45 D2028-97R04 Specification for Cutback Asphalt (Rapid-Curing Type)
Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving
46 D2041-03A
Mixtures

1/7
 ASTM Volume 04.03, June 2010
Road and Paving Materials; Vehicle-Pavement Systems
Table of Contents

Standard Number Title

47 D2042-09 Test Method for Solubility of Asphalt Materials in Trichloroethylene

48 D2170-07 Test Method for Kinematic Viscosity of Asphalts (Bitumens)
49 D2171-07E01 Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
50 D2172-05 Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
51 D2397-05 Specification for Cationic Emulsified Asphalt
52 D2399-83R05 Practice for Selection of Cutback Asphalts
53 D2419-09 Test Method for Sand Equivalent Value of Soils and Fine Aggregate
54 D2489_D2489M-08 Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
55 D2493-01E01 Viscosity-Temperature Chart for Asphalts
56 D2493_D2493M-09 Viscosity-Temperature Chart for Asphalts
57 D2628-91R05 Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous
58 D2726-09
Mixtures
59 D2728-98R09 Practice for Paving Uses and Application Temperatures for Road Tars
Specification for Lubricant for Installation of Preformed Compression Seals in Concrete
60 D2835-89R07
Pavements
61 D2872-04 Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
62 D2940_D2940M-09 Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
63 D2950-09 Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
64 D2995-99R09 Practice for Estimating Application Rate of Bituminous Distributors
65 D3042-09 Test Method for Insoluble Residue in Carbonate Aggregates
66 D3141_D3141M-09 Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer
67 D3142-05
Method
68 D3143-08 Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
69 D3203-05 Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
70 D3279-07 Test Method forn-Heptane Insolubles
71 D3289-08 Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
72 D3319-06 Practice for the Accelerated Polishing of Aggregates Using the British Wheel
73 D3381_D3381M-09A Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S.
74 D3387-83R03
Corps of Engineers Gyratory Testing Machine (GTM)
75 D3398-00R06 Test Method for Index of Aggregate Particle Shape and Texture
Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete
76 D3406-95R06
Pavements
77 D3496-99R05 Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
78 D3542-08 Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
79 D3549-03 Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
80 D3625-96R05 Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
81 D3628-08 Practice for Selection and Use of Emulsified Asphalts
82 D3633-98R06 Test Method for Electrical Resistivity of Membrane-Pavement Systems
83 D3665-07 Practice for Random Sampling of Construction Materials
Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving
84 D3666-09A
Materials
85 D3744-03 Test Method for Aggregate Durability Index
86 D3910-07 Practices for Design, Testing, and Construction of Slurry Seal
87 D3963_D3963M-01R07 Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear
88 D4013-09
Compactor
89 D4014-03R07 Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge
90 D4070-08
Compression Seals in Concrete Structures
91 D4071-84R05 Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
92 D4124-09 Test Method for Separation of Asphalt into Four Fractions
93 D4125-05 Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
94 D4215-07 Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

2/7
 ASTM Volume 04.03, June 2010
Road and Paving Materials; Vehicle-Pavement Systems
Table of Contents

Standard Number Title

95 D4280-08 Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
96 D4311_D4311M-09 Practice for Determining Asphalt Volume Correction to a Base Temperature
97 D4383-05E01 Specification for Plowable, Raised Retroreflective Pavement Markers
98 D4460-97R09 Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement
99 D4469-01R06
Mixture
100 D4505-05 Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
101 D4552-92R04 Practice for Classifying Hot-Mix Recycling Agents
Practice for Quality Control Systems for Organizations Producing and Applying Bituminous
102 D4561-96R06
Paving Materials
103 D4580-03R07 Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
104 D4592-05 Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection
105 D4602-93R08
Equipment
106 D4694-09 Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
107 D4695-03R08 Guide for General Pavement Deflection Measurements
108 D4748-06 Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
109 D4788-03R07 Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse
110 D4791-05E01
Aggregate
111 D4792-00R06 Test Method for Potential Expansion of Aggregates from Hydration Reactions
112 D4867_D4867M-09 Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
113 D4887-99R03 Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
114 D4956-09E01 Specification for Retroreflective Sheeting for Traffic Control
Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens
115 D4957-08
by Vacuum Capillary Viscometer
Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete
116 D5078-95R06
Pavements
117 D5106-08 Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
118 D5148-97R02 Test Method for Centrifuge Kerosine Equivalent
119 D5167-03 Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-
120 D5249-95R06
Cement Concrete and Asphalt Joints
Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and
121 D5329-09
Portland Cement Concrete Pavements
122 D5340-10 Test Method for Airport Pavement Condition Index Surveys
123 D5360-09 Practice for Design and Construction of Bituminous Surface Treatments
124 D5361-06 Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
125 D5404-03 Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
126 D5444-08 Test Method for Mechanical Size Analysis of Extracted Aggregate
127 D5505-06 Practice for Classifying Emulsified Recycling Agents
Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting
128 D5506-08
Bituminous Paving Materials
129 D5546-09 Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6
130 D5581-07AE01
inch-Diameter Specimen)
Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment
131 D5624-02R07
Applications
132 D5710-05 Specification for Trinidad Lake Modified Asphalt
133 D5711-03 Test Method for Determining the Adherent Coating on Coarse Aggregates
134 D5801-95R06E01 Test Method for Toughness and Tenacity of Bituminous Materials
135 D5821-01R06 Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
Guide for Calculating Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic
136 D5858-96R08
Theory
Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for
137 D5893-04
Portland Cement Concrete Pavements
Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint
138 D5973-97R07
Sealing

3/7
 ASTM Volume 04.03, June 2010
Road and Paving Materials; Vehicle-Pavement Systems
Table of Contents

Standard Number Title

139 D5977-03R07 Specification for High Load Rotational Spherical Bearings for Bridges and Structures
140 D6084-06 Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating
141 D6087-08
Radar
142 D6114_D6114M-09 Specification for Asphalt-Rubber Binder
143 D6153-97R07 Specification for Materials for Bridge Deck Waterproofing Membrane Systems
144 D6154-09 Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
145 D6155-06 Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
146 D6297-01R07 Standard Specification for Asphaltic Plug Joints for Bridges
147 D6307-05R10 Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
148 D6372-05 Practice for Design, Testing, and Construction of Micro-Surfacing
149 D6373-07E01 Specification for Performance Graded Asphalt Binder
150 D6390-05 Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
151 D6433-09 Practice for Roads and Parking Lots Pavement Condition Index Surveys
152 D6521-08 Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
153 D6607-00R09 Practice for Inclusion of Precision Statement Variation in Specification Limits
154 D6608-00R06 Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
155 D6626-09 Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
156 D6627-01R06 Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
157 D6628-03 Specification for Color of Pavement Marking Materials
Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending
158 D6648-08
Beam Rheometer (BBR)
159 D6690-07 Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
160 D6703-07 Test Method for Automated Heithaus Titrimetry
161 D6704-08 Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
162 D6723-02 Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using
163 D6752-09
Automatic Vacuum Sealing Method
164 D6816-02 Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
165 D6847-02 Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using
166 D6857-09
Automatic Vacuum Sealing Method
167 D6924-03R07 Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA)
168 D6925-09
Specimens by Means of the Superpave Gyratory Compactor
169 D6926-04 Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
170 D6927-06 Test Method for Marshall Stability and Flow of Bituminous Mixtures
Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval
171 D6928-08E01
Apparatus
172 D6929-04 Practice for Freezing of Emulsified Asphalts
173 D6930-04 Test Method for Settlement and Storage Stability of Emulsified Asphalts
174 D6931-07 Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
175 D6932_D6932M-08 Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
176 D6933-08 Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
177 D6934-08 Test Method for Residue by Evaporation of Emulsified Asphalt
178 D6935-04 Test Method for Determining Cement Mixing of Emulsified Asphalt
179 D6936-09 Test Method for Determining Demulsibility of Emulsified Asphalt
180 D6937-08 Test Method for Determining Density of Emulsified Asphalt
181 D6951_D6951M-09 Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix
182 D6995-05
(Gmm)
183 D6997-04 Test Method for Distillation of Emulsified Asphalt
184 D6998-04 Practice for Evaluating Aggregate Coating using Emulsified Asphalts
185 D6999-04 Practice for Miscibility of Emulsified Asphalts
186 D7000-08 Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

4/7
 ASTM Volume 04.03, June 2010
Road and Paving Materials; Vehicle-Pavement Systems
Table of Contents

Standard Number Title

Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving
187 D7063-05
Mixture Samples
188 D7064_D7064M-08 Practice for Open-Graded Friction Course (OGFC) Mix Design
Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface
189 D7113-09
Contact Methods
Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of
190 D7115-08
Gyration Using Simulated Loading
Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement
191 D7116-05
Concrete Pavements
Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine
192 D7172-06E01
Aggregates Using Infrared
193 D7173-05 Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving
194 D7174-05
and Structural Construction
Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic
195 D7175-08
Shear Rheometer
196 D7196-06 Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle
197 D7226-06
Viscometer
198 D7227-06 Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
199 D7228-06A Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
Test Method for Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold
200 D7229-08
Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of
201 D7312-07
Asphalt Mixtures Using the Superpave Shear Tester (SST)
Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-
202 D7313-07A
Shaped Compact Tension Geometry
Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
203 D7369-09
Test
Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended
204 D7370-09
Aggregate Using Combined Vacuum Saturation and Rapid Submersion
205 D7402-09 Practice for Identifying Cationic Emulsified Asphalts
Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum
206 D7403-09
Distillation
207 D7404-07 Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic
208 D7405-10
Shear Rheometer
Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval
209 D7428-08E01
Apparatus
Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to
210 D7460-08
Repeated Flexural Bending
211 D7496-09 Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative
212 D7497-09
Technique
Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using
213 D7552-09
Dynamic Shear Rheometer
214 D7553-09 Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
215 D7564_D7564M-09 Practice for Construction of Asphalt-Rubber Cape Seal
216 E0274-06 Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
217 E0303-93R08 Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped
218 E0445_E0445M-88R08
With Full-Scale Tires
219 E0501-08 Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger
220 E0503_E0503M-88R04
Vehicle Diagonal Braking Technique
221 E0524-08 Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform
222 E0556-95R06
(User Level)
Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel,
223 E0660-90R07
Circular Track Polishing Machine
224 E0670-09 Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter

5/7
 ASTM Volume 04.03, June 2010
Road and Paving Materials; Vehicle-Pavement Systems
Table of Contents

Standard Number Title

225 E0867-06 Terminology Relating to Vehicle-Pavement Systems

Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer
226 E0950_E0950M-09
Established Inertial Profiling Reference
227 E0965-96R06 Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
228 E1082-90R07 Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
229 E1166-00R09 Guide for Network Level Pavement Management
230 E1170-97R07 Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
231 E1215-93R07 Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
232 E1274-03R08 Test Method for Measuring Pavement Roughness Using a Profilograph
Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test
233 E1318-09
Methods
Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using
234 E1337-90R08
Standard Reference Test Tire
235 E1364-95R05 Test Method for Measuring Road Roughness by Static Level Method
Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement
236 E1448_E1448M-09
Roughness
Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by
237 E1489-08
an Inertial Profile Measuring Device
Specification for Special Purpose, Smooth-Tread Tire, Operated on Fixed Braking Slip
238 E1551-08
Continuous Friction Measuring Equipment
239 E1656-06 Guide for Classification of Automated Pavement Condition Survey Equipment
240 E1703_E1703M-95R05 Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
241 E1777-09 Guide for Prioritization of Data Needs for Pavement Management
242 E1778-98AR08 Terminology Relating to Pavement Distress
243 E1844-08 Specification for A Size 10 × 4-5 Smooth-Tread Friction Test Tire
244 E1845-09 Practice for Calculating Pavement Macrotexture Mean Profile Depth
Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable
245 E1859-97R06
Slip Technique
246 E1889-97R09 Guide for Pavement Management Implementation
247 E1890-01R06 Guide for Validating New Area Reference Skid Measurement Systems and Equipment
Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction
248 E1911-09AE01
Tester
Practice for Computing International Roughness Index of Roads from Longitudinal Profile
249 E1926-08
Measurements
250 E1927-98R07 Guide for Conducting Subjective Pavement Ride Quality Ratings
251 E1957-04 Practice for Installing and Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
252 E1960-07 Practice for Calculating International Friction Index of a Pavement Surface
253 E2034-99R07 Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
254 E2100-04 Practice for Calculating the International Runway Friction Index
Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces
255 E2101-00R05
Using an Averaging-Type Spot Measuring Decelerometer
Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of
256 E2133-03R09
a Traveled Surface
257 E2157-09 Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
Specification for Telecommunications and Information Exchange Between Roadside and Vehicle
258 E2213-03 Systems ― 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access
Control (MAC) and Physical Layer (PHY) Specifications
259 E2259-03A Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data
260 E2300-09 Specification for Highway Traffic Monitoring Devices
Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces
261 E2340-06
Using a Continuous Reading, Fixed-Slip Technique
Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping
262 E2341_E2341M-05R09
Distance at Traffic Incident Sites
263 E2380_E2380M-09 Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
264 E2415-05 Practice for Installing Piezoelectric Highway Traffic Sensors
265 E2467-05 Practice for Developing Axle Count Adjustment Factors
266 E2468-05 Practice for Metadata to Support Archived Data Management Systems
267 E2532-09 Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

6/7
 ASTM Volume 04.03, June 2010
Road and Paving Materials; Vehicle-Pavement Systems
Table of Contents

Standard Number Title

268 E2560-07 Specification for Data Format for Pavement Profile

269 E2561-07A Practice for the Installation of Inductive Loop Detectors
270 E2583-07 Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
271 E2665-08 Specification for Archiving ITS-Generated Traffic Monitoring Data
Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to
272 E2666-09
Determine Maintenance Levels for Use at Airports
273 E2667-09 Practice for Acquiring Intersection Turning Movement Traffic Data

7/7