3M Performance Fluid exe PE5060DL information Introduction 3M” Performance Fluid PF-S060DL is a high-purity version of 3M" Performance Fluid PF-5060, Product specifications were recently tightened to meet the increasing performance demands of the electronics industry. These specifications include ions, metals and non-volatile residue. 3M fluid PF-SO60DL has been the industry standard for lubricant deposition on hard disks since ozone-depleting CFCs were regulated out of use. PF-SO60DL fluid has 2 zero ozone depletion potential and is exempt from VOC regulations, Its a more effective solvent for depositing PTFE lubricants because it dissolves only the lubricant and essentially no water or hydrocarbons. Low viscosity and surface tension provide PE-SQ60DL fluid with excellent surface wetting and flow. Material Description Not for specification 7 purposes Neo uD Allvaluesdetermined -AbPedrance Clear, colorless liguid ‘at 25°C unless Average Molecular Weight 338 otherwise specified Boiling Point 56°C Point lammability Range in Air Liquid Density Surface Tension 12 dynesiem Solubility of Solvent in Water <10 ppmw 10 ppmw Vapor Pressure 232 mm Hg Viscosity 0.67 eps ‘Heat of Vaporizatio 1 cally Specific Heat 0.25 calig°C ‘SIVISILYA SAY wera Ay RR 801LS-Z22-9983M"Performance Fluid PF-5060DL Tyrical Purity Specifications Purity Specifications (properties controlled and monitored for 3M fluid PF-SO60DL: ee Non-Volatile Analysis* Hydrocarbons ppb <60 Silicones ppb ND Esters ppb <25 Metals** Ag ppb <5 Al ppb <5 Ba ppb <5 Ca ppb <5 ca ppb <5 Co ppb <5 cr ppb <5 cu ppb <5 Fe ppb <5 K ppb <5 ppb <5 ppb <5 ppb <5 ppb <5 ppb <5 ppb <5 Sr ppb <5 1 ppb <5 a PPD * Certificate of Analysis specificstions ** Certificate of Conformance specifications ‘SIVISILYA SAY wera Ay RR 801LS-Z22-9983M"Performance Flui PF-S060DL Typical Purity Specifications (continued) oe NVR ppm <10 Certificate of Conformance Specifications E ppb <10 HCOO ppb <10 cr ppb <10 NO: ppb <10 Br ppb <10 NOs ppb <10 ppb <10 ppb <10 CH.COO- ppb <15 co, ppb <10 Safety and Handling Before using this product, please read the current prosiuct Material Safety Data Sheet (available through your 3M sales or techni ive) and the precautionary statement on the product package. Follow all applicable precautions and directions. Toxicity studies show that PFCs are non-irritating to the eyes and skin, are practically non-toxic orally. and have low inhalation toxicity (Product Toxicity ‘Summary Sheet available upon request). 3M fluid PF-SO60DL is nonflammable. This fluid is highly resistant to thermal breakdown and hydrolysis in storage and during use. ‘The Material Safety Data Sheet (MSDS) provides recommended handling procedut service represents ‘SIVISILYA SAY wera Ay RR 801LS-Z22-9983M"Performance Fluid PF-5060DL Materials Compatibility ‘The fully-fluorinated structure of 3M fluid PF-SO6ODL results ina high degree of compatibility with most of the metals, plastics and elastomers used in computer disk substrates and lubrication equipment, 3M PFCs have shown good compatibility with particularly sensitive plastics such as polycarbonate and acrylics. 3M fluid PF-S060DL will not attack PTFE, Environmental Properties Packaging and Avai 3M fluid PF-S060DL has zero ozone depletion potential. The material is exempt from the US. EPA and most state definitions of a volatile organic compound (VOC) because it does not contribute to ground-level smog formation. PE-S060DL fluid, a perfluorocarbon (PFC), has a high global warming potential and a long atmospheric lifetime. As such, it should be carefully managed to 3M” Novec” Engineered Fluids (HFES) should be considered as an alternative to PF-S06ODL fluid if practical, because of their shorter atmospheric lifetimes and lower global warming potential. 3M recommends that users of PF-SO60DL fluid limit emissions by employing good conservation practices, and by implementing recovery, recycling and/or proper disposal procedures. For details about 3's used fluid return program, see back cover. Prop PR-S060D1 zone depletion potential’ (ODP) 0.00 Global warming potential: (GWP) 9000 “Atmospheric lifetime in years 3200 cRC-11=10 {GWP = pounds equivalent CO, 100-9 integrated time horizon (ETH) bility PF-SO6ODL fluid may be ordered in the following comtainer sizes + 55-gallon drum (750 Ibs); + 3.5-gallon pail (46 Ibs); + L-gallon glass container (14 ths) ‘SIVISILYA SAY wera Ay RR 801LS-Z22-9983M"Performance Fluic PF-5060DL Toxicity Profile ‘The toxicological testing completed on 3M fluid PF-SO6ODL shows the overall toxicity is, low. The material is practically non-irritating to the eyes and skin and is not a mutagen or cardiac sensitizer. Its rated “practically non-toxic” through inhalation. A 90-day inhalation study has established an observable adverse effect level at >50,000 ppm. ‘Toxicological Test Results es ee ‘Acute Lethal Inhalation Concentration >5.260 mg/l. (1 hour) Oral Practically non-toxic (>5 g/kg) Eye Iritation| Non-itrtating ‘Skin Irritation Non-irvtating Mutagenicity Negative (Ames) Cardiac Sensitization [No signs of sensitization at exposures up © 175,000 ppm Ecotoxicity Test Complete-very low aquatic toxicity 90-day Inhalation No observable adverse effect evel 500000 ppm Regulatory Status 3M fluid PF-5060DL has been accepted for commercial use by regulatory ageneci the United States, Canada, Japan, Korea, Australia, Burope, and the Philippines. In addition, PE-S060DL. fluid has been excluded by the US. EPA from the definition of 2. VOC on the basis that this compound has negligible contribution to tropospheric ozone ‘formation, Contact your local 3M representative regarding the regulatory status of PF-SO6ODL ‘uid in other counties. Environmental Policy 3M will recognize and exercise its responsibility to + prevent pollution at the source wherever and whenever possible + develop products that will have a minimal effect on the environment + conserve natural resources through the use of reclamation and other appropriate methods + assure that its facilities and products meet and sustain the regulations of all Federal, State and local environmental + assist, wherever possible, governmental ged in environmental activities nncies und other oficial organizations ‘SIVISILYA SAY Wo PART RAT 801LS-Z22-9983M "Performance Fluid PF-5060DL Recycle and Disposal Options Pee e cee eer 3M offers a program for free pickup and return of used 3M specialty fluids in the US. through Safety-Kleen Corp. A pre-negotiated handling agreement between users and this service provider offers users broad protection against future liability for used 3M product. The fluid retarn program is covered by independent third-party financial and environmental aucits of treatment, storage and disposal facilities. Necessary documentation is provided. A minimum of 30 gallons of used 3M specialty fluid is requited for participation in this free program.” 'y-Kleen Corp. has a network of 156 branch service centers in the U.S. This large fleet will provide timely, economical fluid disposal service For additional information on the 3M Used Fluid Return Program, contact Safety- Kleen at this toll-free line: 888.932.2731. Contact your local 3M representative for fluid return programs outside the US. ** Must have 30 or more gallon purchase to participate in the 3M paid program. Used product ‘of 5-30 gallons can be returned though Safety-Kleen atthe user's expense. Resources 3M™ Performance Fluid PF-SO60DL is supported by global sales, technical and customer service resources, with fully-staffed technical service laboratories in the US. Europe, Japan, Latin America and Southeast Asia. Users benefit from 3M’s broad technology base and continuing attention to product development, performance, safety and environmental issues, For other information on additional 3M fluids, coatings and other chemical products for the electronics industry, visit our web site at: www.3m.com/electronics/chemicals North America Europe Sumitomo 3M 3M Specialty Materials 3M Specialty Materials 88, Minami Hashimoto 3-chome Latin America 3M Center, Building 223-65.04 3M Belgium N.V. Sugamihurashi, Kanagawarken Call US.) 6817367123, St.Paul. MN 55144-1000 Haven 1008, Canadastaat 11229-1185 Jepan 00838 5045 1B-2070 Zwijodrecht s142779 2111 Tel (32)3 2807521 Important Notice to Purchaser: The information in his publication fs based on fests that we bollave ae reliable. Your results may vary due to ferences in est types and condtons. You must evaluate and determine whether the producti suitable for your intended application. Since Conditions of product use are cutsice of our control and vary widely, the folowing is made in leu o ll express cr implied warantes (including the warranties of merchantabilty or fness for a particular purpose): M's only obligation and your only remedy is replacement of product thats ‘shown o be detective when you receive In no case wil 3M be labe for any special incidental, ar consequertal damages based on breach cof warranty or contact, negligence, strit tortor any other theory. aM Specialty Ma 3M Center, Building ‘St.Paul, MUN 5514-1000 e490 2w0ou re coe) ‘SIVISILYA SAY WoT RAT 801LS-Z22-998