Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Eye/Face Washes G1775: Guardian Equipment

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

G1775 Eye/Face Washes

 G1775 Eye/Face Wash, Deck Mounted Swivel, Right Hand Mounting


 G1775LH Eye/Face Wash, Deck Mounted Swivel, Left Hand Mounting

 G1775LH  G1775

Application: Eye/face wash for mounting on counter Construction: Polished chrome plated brass.
next to sink. Spray heads swivel 90 degrees from storage
to operational position. Water flow is activated by flag Supply: 1/2” NPT male inlet.
handle.
Sign: ANSI-compliant identification sign.
Spray Head Assembly: Two FS-Plus™ spray heads.
Each head has a “flip top” dust cover, internal flow control Quality Assurance: Unit is completely assembled and
and filter to remove impurities from the water flow. water tested prior to shipment.

Valve: 1/2” IPS chrome plated brass stay-open ball Available Options
valve. Valve is US-made with chrome plated brass ball
and Teflon® seals.
 DC Stainless steel dust cover for each spray head.
Mounting: Unit may be mounted on right side (G1775)
or left side (G1775LH) of sink. Furnished with locknut and  TMV G3600 thermostatic mixing valve precisely
washer for securing unit to countertop. Provide 7/8” diam- blends hot and cold water to deliver warm (tepid)
eter hole in counter. water as provided by ANSI Z358.1-2004. Refer to
“Tempering Units” section for complete technical and
product selection information.

ETL Listed 101496.


Units have been tested
GUARDIAN EQUIPMENT
to and comply with 660 North Union Street Phone 312 733 2626
ANSI Z358.1 - 2004 Chicago, IL 60610 Fax 312 733 4684
info@gesafety.com gesafety.com
G1775 Eye/Face Washes

ETL Listed 101496.


Units have been tested
to and comply with
ANSI Z358.1 - 2004
Sign Included

This space for Architect/Engineer approval


GUARDIAN EQUIPMENT
660 North Union Street Phone 312 733 2626
Chicago, IL 60610 Fax 312 733 4684
info@gesafety.com gesafety.com
051305 Due to continuing product improvement, the information contained in this
document is subject to change without notice. All dimensions are ±1/4” (6mm).

You might also like