Logging into Haxorware

This boo k is in t en d ed to b e a m an u al f or H axo rw ar e whi c h is a cus tom c a ble mo de m f i r mw ar e. T his is a le g al

f irm wa r e ch an ge. T his boo k is NO T in ten d ed to de mons t ra te or condon e any ille gal pr ac ti ces . DO NO T ad d
in f orm a tion to t his boo k re ga r din g A NY t h ef t o f s e rvi ce as M ode mP re mo dz. ne t does no t s u p por t no r con done
an y th in g in t ha t f as hion ! En joy you r pu r c has e.

Power and RJ-45 only

Plug in the only the RJ-45 cable from your modem to your PCs NIC card and power the modem down. If
using a laptop make sure to turn off the wifi to not disrupt your configuration by blocking the IP address
needed. Then, plug in the power to the modem after this and NEVER plug in the coaxial wire until you
have you modem configured properly and ready to test. Reason is because you need to make sure the
firmware upgrade feature is disabled so it does not overtake your firmware before you have a chance to
even look at it to configure.

GUI Access via Browser

Once youre all plugged up and ready your PC or end device should have received an IP address (usually
up to 1 minute). Once this is done, simply open your browser of choice, and enter 192.168.100.1
without the quotes. Hit enter and from there you should see your settings and ready for configuration,
congratulations. ****Troubleshooting
****Some report issues logging i nto the modem, if your modem does not get an IP address
please set your NIC card manually. To do so:
1.
2.
3.
4.

Get to the network settings (if you needs specifics we can support PC or MAC any OS just e-mail support).
Open the IP settings and change the NIC from dynamic to static.
Set the Gateway to 192.168.100.1 and the IP address to 192.168.100.x (x being anything under 255). Set the Subnet
mask to 255.255.255.0 although it will do it automatically on some OSs.
Retry to Access the GUI via browser.

If you have tried this and still having issues contact sales@modempremodz.net with your PayPal Transaction ID immediately. If
you are not a customer of ModemPremodz please do not waste your time.

Settings
Factory Mode - This forces the modem to behave as if it was supplied by the ISP and bypasses customs
settings.
Disable Firmware Upgrades - This option will force Haxorware to ignore new modem firmware
pushes from the ISP. Un-checking this could compromise your Haxorware install and overwrite your
firmware.
Force Network Access Tries default settings to login.

Tftp Enforce Bypass If your ISP enforces Tftp configuration file this option will tell the modem to
download the supplied config file at the right point - even if you are using another one.
Disable IP Filters on startup IP filters are used by some ISP's to block traffic of certain types on
certain ports (such as if your ISP blocks port 80 to prevent you from hosting a web server). This option
bypasses them entirely without hassle.

Baseline Privacy
This is important to know about if you are trying to provision, it is best that you first get your stock modem
provisioned. Get that modem hacked with Haxorware after by emailing sales@modempremodz.net, if you
purchased a modem from them they will do this service for free!! It includes backing up your original material and
sending it all to you via mail, after we will ship back your unit for a fee of only $4.75 via paypal to get it back to you
within just 3 days or less after it touches our hands at ModemPremodz.net!! When you get the material you simply
inject it into the modem using the Baseline Restore Certs..and your all good to go with your newly provisioned
modem with Haxorware waiting to be configured to your liking. As for your stock modem we always put back on
stock firmware when you get it back unless told.

BPI Baseline privacy Your version running. BPI 1.1 must be enabled to use docsis 1.1 config
files with valid certificates. Bypass must be enabled to use 1.1 configs with self signed certificates.
Provisioned lines are important here, and we do not support MAC scanning and trading so please
do not ask.

Backup Saves your current certificate set for later so you have it and can use it on whatever
modem you please.

Restore from filesystem Restore uploaded or previously backed up certificate sets saved on
the modems filesystem.

Restore from file Can be restored from a single file from your PC

Advanced Telnet Usage Commands

stop scanning frequency
cd /d
scan_stop
or
cd /cm
scan_stop

start scanning frequency

cd /d
goto_ds 327 (will be 327 Mhz, and if not hitch continues scanning)
show HFC IP
cd /d
ip_show
or:
cd /ip
lease_show
Show information about registered modem
cd /d
modem_caps
clear logs
cd /e
flush
disable snmp filters
cd /s
filters off
yes
set snmp to NoAccess
cd /s
view_v1v2 NoAccess
show snmp information
cd /s
n2m
y
Hide System OID
cd /s

delete sysDescr
write
print certificate values
cd /n/b
print private
print public
print root
print cm_cert
print ca_cert
change certificate values
cd /n/b
change_key public
change_key private
change_key root
change_key cm_cert
change_key ca_cert
write
place root or ca_cert in dynamic memory
cd /n/b
key_location root false
key_location ca_cert false
write
set frequency and channel
cd /n/d
ds_frecuency xxx <- your weightings in mhz
us_channel x <- your number of channel
write

change the start up downstream frequency

cd /n/d
startup_dsfreq xxxxxx
cd ..
write
activating DOCSIS 1.1
cd /n/d
enable docsis11 true
write
disable bpi
cd /n/d
enable bpi false
write
enable bpi+
cd /n/d
enable bpi true
bpi_version 1
write
disable bpi+
cd /n/d
enable bpi true
bpi_version 0
write
change tftp info
cd /n/d
enable force_cfgfile true
dhcp_settings
My IP Address: [192.168.100.1] {hit enter}

Subnet Mask: [255.255.255.0] {hit enter}

Router IP Address: [192.168.100.254] {hit enter}
Those are the only 3 that really need to be changed.
Do you want to change the other settings? [no] (hit Y}
TFTP Server IP Address: [10.10.10.254] type in the IP of your TFTP server here
Config file name: [cm.bin] {type config file}
Time Server IP Address: [10.10.10.254]
SysLog Server IP Address: [10.10.10.254]
change the tuner
cd /n/h
cm_tuner xx (xx its share)
write
change the annex for your area
cd /n/h
annex_ # (# = A -> EuroDOCSIS, B -> DOCSIS, C -> more)
cm_annex @ (@ = 1 -> Annex A, 0 -> Annex B, 2 - Annex C, 3 hybrid)
Write
(It is necessary to change the cm_annex if you change the annex)
change Ethernet MAC
cd /n/h
mac_address 2 aa:bb:cc:dd:ee:ff
write
change USB MAC
cd /n/h
usb_mac_address aa:bb:cc:dd:ee:ff
write
change the HFC MAC
cd /

write_memory 2155776876 0x11

write_memory 2155776877 0x22
write_memory 2155776878 0x33
write_memory 2155776879 0x44
write_memory 2155776880 0x55
write_memory 2155776881 0x66
cd /n
write
or
Assuming our MAC address is AA:BB:CC:DD:EE:FF, enter:
write_memory -s 4 0x807e8b98 0xAABBCCDD
write_memory -s 2 0x807e8b9c 0xEEFF
or
cd n/h
mac_address 1 aa:bb:cc:dd:ee:ff
cd /n
write
show the current state
cd /n/h
show
or:
cd /n/d
show
enable telnet access
cd /n/m
enable_telnet true
write

Change the username and pass for telnet

cd /n/m
user_name
password
write
Disable external telnet access(stops others from being able to access your telnet from the
coax side)
cd /n/m
telnet_ipstacks 2
write

Completely disable any firmware changes without a Jtag, change from 0 to 3 if you want to
tftp new firmware to your modem though

cd \
cd non-vol
cd snmp
max_dload_tries 0
write

DNS OPEN \ Free to use

First go to:
Start> Control Panel > Network Connections > Right click on your active network adapter >
Choose Properties

Next, you have to choose Internet Protocol (TCP/IP) as shown above. On VISTA OR
WINDOWS 7, choose Internet protocol (TCP/IPv4)). Then click Properties, and you should
see these boxes:

For the box "Use the following DNS server addresses", put in any of given addresses below:

Googl
8.8.8.8
8.8.4.4
OpenDNS
208.67.222.222

208.67.220.220
Verizon (level3)
4.2.2.1
4.2.2.2
4.2.2.3
4.2.2.4
4.2.2.5
4.2.2.6
Verizon
151.197.0.38
151.197.0.39
151.202.0.84
151.202.0.85
151.202.0.85
151.203.0.84
151.203.0.85
199.45.32.37
199.45.32.38
199.45.32.40
199.45.32.43
ORSC
199.166.24.253
199.166.27.253
199.166.28.10
199.166.29.3
199.166.31.3

195.117.6.25
204.57.55.100
GTE
192.76.85.133
206.124.64.1
One Connect IP
67.138.54.100
Cox.net
Exetel
220.233.167.31
VRx Network Services
199.166.31.3
SpeakEasy
66.93.87.2
216.231.41.2
216.254.95.2
64.81.45.2
64.81.111.2
64.81.127.2
64.81.79.2
64.81.159.2
66.92.64.2
66.92.224.2
66.92.159.2
64.81.79.2
64.81.159.2

64.81.127.2
64.81.45.2
216.27.175.2
66.92.159.2
66.93.87.2
Sprintlink
199.2.252.10
204.97.212.10
204.117.214.10
Cisco
64.102.255.44
128.107.241.185
Dnsadvantage
156.154.70.1
156.154.71.1
Scrublt
67.138.54.100
207.225.209.66
--------------------------------------------------------------------------------------------------------------------Universal DNS Servers
Server 1
69.111.95.106
Server 2
206.156.191.153
--------------------------------------------------------------------------------------------------------------------International

--------------------------------------------------------------------------------------------------------------------Australia
QLD
144.140.70.29
144.140.71.15
144.140.70.16
Westnet (ADSL)
203.21.20.20
203.10.1.9
--------------------------------------------------------------------------------------------------------------------Canada
Shaw Cable
64.59.144.16
64.59.144.17
Telus(BC)
154.11.128.129
154.11.128.150
154.11.128.1
154.11.128.2
154.11.128.130
209.53.4.150
--------------------------------------------------------------------------------------------------------------------China
I-Cable
(Hong Kong)
210.80.60.1

210.80.60.2
--------------------------------------------------------------------------------------------------------------------Italy
Alice
212.216.112.112
212.216.172.62
--------------------------------------------------------------------------------------------------------------------Malaysia
Schoolnet (ADSL)
202.75.44.18
203.106.3.171
202.75.44.20
Tmnet Streamyx (ADSL)
202.188.0.132
202.188.0.133
202.188.0.147
202.188.0.161
202.188.0.181
202.188.0.182
202.188.1.4
202.188.1.5
202.188.1.23
202.188.1.25
--------------------------------------------------------------------------------------------------------------------Mexico
Cablemas (Cable 128kbps)

69.44.143.245
200.79.192.3
--------------------------------------------------------------------------------------------------------------------Nederland
Hetnet
10.0.0.5
10.0.0.2
10.0.0.3
Planet Internet
195.121.1.34
195.121.1.66
--------------------------------------------------------------------------------------------------------------------New Zealand
Xtra (DSL)
202.27.158.40
202.27.156.72
Paradise (DSL)
203.96.152.4
203.96.152.12
--------------------------------------------------------------------------------------------------------------------Portugal
Netviso (Cable)
213.228.128.6
213.228.128.5
TVTel
195.22.0.204

195.22.0.205
--------------------------------------------------------------------------------------------------------------------Sweden
Tele2
130.244.127.161
130.244.127.169
------------------------------------------------------------------------------------------------------------------United Kingdom
AOL
205.188.146.145
Blueyonder/Telewest (Cable)
193.38.113.3
194.177.157.4
BTInternet
194.73.73.172
194.73.73.173
194.72.9.44
194.72.9.38 (Cardiff, S.Wales)
194.72.9.39 (Cardiff, S.Wales)
Bulldog Broadband
Ns3.bulldogdsl.com . 83.146.21.5 (South)
Ns4.bulldogdsl.com . 83.146.21.6 (South)
Ns5.bulldogdsl.com . 212.158.248.5 (North)
Ns6.bulldogdsl.com . 212.158.248.6 (North)
Nildram (ADSL)
213.208.106.212

213.208.106.213
NTL (Cable) and Virgin.net (ADSL)
194.168.4.100
194.168.8.100
Pipex (ADSL)
62.241.162.35
62.189.34.83
Silvermead (Satellite, DSL, ISDN)
62.55.96.226
62.55.96.109 (unchecked)
Telewest (Cable)
62.31.176.39
194.117.134.19
Tiscali, Screaming.net, Worldonline, Lineone
212.74.112.66
212.74.112.67
212.74.114.129 (Cambridge)
212.74.114.193 (Cambridge)
Wanadoo UK (ADSL)
195.92.195.94
195.92.195.95
Zen Internet
Primary DNS: 212.23.8.1
Secondary DNS: 212.23.3.1