Catalog Foxboro Pneumatic Instruments 03-11

Ordering
Specifying Your Instrument or Accessory

You can easily specify many instruments and accessories described in this
catalog. Sections covering our most popular items include all the technical data
you need to know for most applications. To specify the appropriate item, simply
follow the step-by-step procedure at the end of each description. Your Foxboro
representative can help also.
For Example:
Choose the product code.
Itemize the information needed to complete the specification.
Ordering:
To order, contact your Foxboro representative.
Or call, in North America: 1-866-746-6477, or International: 001-508-549-2424.
Or visit www.buyautomation.com/officelocator.
Give us the ordering information using this catalog. Then tell us where you want
the order shipped and when you need it delivered. Well do the rest.
Need Help?
If you have questions, let us know. Were ready, and eager, to assist you.
Applications are a Foxboro specialty. We can help you figure out the best
instrument for your purpose.
Instrument catalog available ask your Foxboro representative about it.
1) SPECIFY MODEL NUMBER: 13

Transmitter:

316 ss body.......................................................................................................... A
Monel body.......................................................................................................... A4
Hastelloy C body (supplied without process connectors)............................. A5
Span Limits:

5 and 62 kPa or 20 and 250 inH2O P....................................................................... M

50 and 210 kPa or 200 and 850 inH2O P................................................................ H
Body Material:

316 ss (13A only)..................................................................................................................... S

Monel (13A4 only)................................................................................................................... M
Hastelloy C (13A5 only) (Process Connectors code 0 below must be specified........... C
Process Connectors:
1/4 NPT.............................................................................................................................................. 1
1/2 NPT.............................................................................................................................................. 2
R1/4.................................................................................................................................................... 3
R1/2.................................................................................................................................................... 4
Welding neck for 14 x 21 mm tube and 1/2 in Schedule 80 pipe............................................ 6
None, body tapped for 1/4 NPT.................................................................................................... 0
Optional Features: (also see previous page)

Zero elevation kit........................................................................................................................................ L

Zero suppression kit.................................................................................................................................. R
2) SPECIFY OUTPUT SIGNAL___________________________________________________

3) SPECIFY CALIBRATED DIFFERENTIAL PRESSURE RANGE_______________________
4) SPECIFY ADDITIONAL OPTIONAL FEATURES_________________________________
5) SPECIFY INFORMATION FOR INSTRUMENT TAG______________________________
33 Commercial Street
Foxboro, Massachusetts 02035-2099 U.S.A.
Your Foxboro representative:
Table of Contents
Table of Contents
Pneumatic Transmitters
Differential Pressure..................................................................................... Page 3

Flow .......................................................................................................................... 9
Pressure.................................................................................................................. 12
Liquid Level and Density...................................................................................... 18
Temperature.......................................................................................................... 24
Miscellaneous........................................................................................................ 27
Primary Measurement Elements

Orifice Plates and Flange Unions........................................................................ 29

IFOA Integral Flow Orifice Assemblies.............................................................. 31
Diaphragm Pressure Seals................................................................................... 34
Thermowells and DEWCEL Dew Point Measurement Systems...................... 35
Large Case Instruments
Controllers.............................................................................................................. 37
Recorders and Indicators..................................................................................... 43
Recorders and Controllers................................................................................... 46
Elements................................................................................................................. 49
Miscellaneous........................................................................................................ 57
Panel-Mounted Pneumatic Instruments
Indicating Controllers........................................................................................... 59
Recorders and Controllers................................................................................... 63
Indicating Controllers........................................................................................... 66
Loading, Switching and Bias................................................................................ 68
Computing Elements............................................................................................ 70
Miscellaneous........................................................................................................ 72
Converters
Current-to-Pneumatic........................................................................................... 74
Control Valves Actuators................................................................................... 77
Accessories and Supplies
HUMITEX Circular and Strip Charts.................................................................... 78

Pens and Pen Arms............................................................................................... 80
Product Index...................................................................................................... 83 8
Page 1
Foxboro Pneumatic Transmitters are the industry standard.

All of these instruments have been field proven through years of experience.
They are precise, easy to maintain, and available in a wide range of materials.
The Foxboro line encompasses a variety of measurement types.
Flow Measurement
Differential pressure transmitters.
Temperature Measurement
Filled thermal systems and thermocouple/ RTD devices.
Pressure Measurement
Force balance and indicating transmitters.
Liquid Level Measurement

Differential pressure transmitters with or without chemical seals and buoyancy
transmitters.
Other Applications
Sanitary designs, relative humidity transmitters, speed transmitters, and repeaters.
Foxboro is the leading single source of pneumatic transmitters for the process
industries.
No other manufacturer makes as many types for as many applications.
Page 2
(Differential Pressure)
15A, 13A, 13H Series

Pneumatic d/p Cell
Transmitters
15A, 13A, 13H
n
15Alow
range transmitter adjustable for

ranges from 0-1.3 to 0-6 kPa (0-5 to 0-25
inH20) P at static pressures up to 3.5
MPa (500 psi)
n
13Aadjustable
for ranges from 0-5 to

0-210 kPa (0-20 to 0-850 inH20) P at
static pressures up to 14 MPa (2000 psi)
for ranges from 0-5 to
0-210 kPa (0-20 to 0-850 inH20) P at
static pressures up to 40 MPa (6000 psi)
13A
n
13Hadjustable
n
Low
Air Consumption
For complete specifications, refer to

Product Specification Sheet PSS 2B-1C1 A.
15A
13H
The 15A, 13A, 13H Series Pneumatic d/p

Cell Transmitters measure differential
pressure and transmit a proportional
pneumatic output signal.
Functional Specifications
Static Pressure, Span, and Range Limits
Static Pressure Limit
Series
15A
13A
13H
MPa
psi
3.5
14
40
500
2000
6000
Span Limits

Span
Series Code

15A
13A and

13H
kPa
P
inH2O
P
1.3 and 6
5 and 25
M
H
5 and 62
50 and 210
20 and 250
200 and 850
Process Temperature Limits:

-40 and +120C (-40 and +250F) at capsule.
Ambient Temperature Limits:
-40 and +120C (-40 and +250F).
Range Limits (a)

Span
Series Code
15A
13A and
13H
kPa
P
inH2O
P
12.5
50
M
H
62
210
250
850
(a) Nonzero-based ranges require optional zero elevation

or suppression kit. See HOW TO ORDER. Upper and
lower range values must not exceed range limits. Negative
numbers indicate a higher pressure on the normal Low
Side of the transmitter, such as may occur in closed tank
application with a wet leg.
Output Signal and Suppiy Pressure:

Output Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 kPa
20 psi
Performance Specifications
Accuracy:
15A Series: 0.5% of calibrated span.

13A and 13H Series: 0.5% of calibrated span
except +0.75% of calibrated span for calibrated
spans greater than 130 kPa or 525 inH20 P.
Repeatability:
0.1% of calibrated span.

Hysteresis:
Page 3
Pneumatic Transmitters (Differential Pressure)

15A, 13A, 13H
Physical Specifications
Materials of Wetted Parts:

Wetted Part

Body

Capsule Diaphragm

Other Capsule Parts

Force Bar

Force Bar Seal

Force Bar Gasket

Capsule Gaskets
Process Connection Gaskets
Series
15A, 13A, 13HA
13A4
13A5
AISI 316 ss
316L ss
316 ss
316 ss
cobalt-nickel
silicone elastomer (b)
316 ss
ptfe (c)
Monel
Monel 400 (a)
Monel
Monel
cobalt-nickel
Viton-A
Monel
ptfe
Hastelloy C
Hastelloy C276
Hastelloy C
Hastelloy C
cobalt-nickel
Viton-A
ptfe
(d)
(a) Duranickel capsule diaphragm material supplied when Span Limits code H is specified.
(b) 13H Series uses Buna-N as standard.
(c) 13H Series uses glass filled ptfe as standard.
(d) Hastelloy C bodies are supplied without process connectors.
Mounting:
Direct to process or by bracket for DN 50 or 2 in
horizontal or vertical pipe. Bracket is always
supplied.
Enclosure Classification:
Meets IEC IP53 and provides the environmental
protection of NEMA Type 3.
Materials:
Body Bolts: Alloy steel per ASTM A193 Grade
B7; or 17-4 with Hastelloy C bodies.
Cover:
High impact, glass filled polycarbonate.
Air Connections:
The supply and output connections are tapped
for 1/4 NPT.
Optional Features
Capsule Materials:
Hastelloy C, Monel, Duranickel, and tantalum.
Air Supply Set:

Adjustable regulators with or without gauge.
HF Alkylation Service:
Maximum life with economical materials.
High Process Temperature:

Body temperature up to 190C (375F).
Chlorine Service Preparation:

Cleaned for chlorine service.
Integral Orifice:
For low flow measurements. Refer to Page 31.
Hydrogen Service Preparation:

Gold-plated capsule to prevent hydrogen
penetration.
Bypass Manifolds:
Refer to Page 27.
High Damping:
Medium and low range capsules only.
NACE:
Compliance to NACE Standard MR-01-75.
Page 4
Oxygen Service Preparation:

Cleaned and packaged for oxygen service.
Lower Spans:
Provides spans as low as one-half standard.
15A, 13A, 13H
How to Order

Transmitter:
- L -
316 ss body....................................................................................................................A
Span Limits:
1.3 and 6 kPa or 5 and 25 inH20 P......................................................................................L
Body Material:
316 ss (15A only)............................................................................................................................. S
Process Connectors:

1/4 NPT......................................................................................................................................................1
1/2 NPT......................................................................................................................................................2
R1/4 (metric).............................................................................................................................................3
R1/2 (metric).............................................................................................................................................4
Welding neck for 14 x 21 mm tube and 1/2 in Schedule 80 pipe....................................................6
None, body tapped for 1/4 NPT............................................................................................................0
Zero elevation kit.............................................................................................................................................. L

Zero suppression kit........................................................................................................................................ R
____ - ___ ___ ___ - ___
Transmitter:
316 ss body....................................................................................................................A
Monel body...................................................................................................................A4
Hastelloy C body (supplied without process connectors)......................................A5
Span Limits:
5 and 62 kPa or 20 and 250 inH20 P.................................................................................M

50 and 210 kPa or 200 and 850 inH20 P........................................................................... H
Body Material:
316 ss (13A only)............................................................................................................................. S

Monel (13A4 only).......................................................................................................................... M
Hastelloy C (13A5 only) (Process Connectors code 0 below must be specified)..................C
Process Connectors:
1/4 NP........................................................................................................................................................1
1/2 NP........................................................................................................................................................2
R1/4............................................................................................................................................................3
R1/2............................................................................................................................................................4
Welding neck for 14 x 21 mm tube and 1/2 in Schedule 80 pipe....................................................6
Zero elevation kit...............................................................................................................................................L

Zero suppression kit.........................................................................................................................................R
HOW TO ORDER Continued on Next Page.
Page 5
15A, 13A, 13H
How to Order (continued)

1) SPECIFY MODEL NUMBER: 13H
Transmitter:
____ - ___ ___ ___ - ___
316 ss body .................................................................................................................. A
Span Limits:
5 and 62 kPa or 20 and 250 inH20 P.................................................................................M

50 and 210 kPa or 200 and 850 inH20 P........................................................................... H
Body Material:
316 ss (13HA only).......................................................................................................................... S
Process Connectors: (a)
1/4 NPT......................................................................................................................................................1
1/2 NPT......................................................................................................................................................2
R1/4 ........................................................................................................................................................3
R1/2 ........................................................................................................................................................4
None, body tapped for 9/16-18 Aminco fitting...................................................................................5
Optional Features: (also see Page 4)

(a) The transmitter is normally supplied with body tapped for 1/4 NPT unless Process Connectors code
5 is specified.
2) SPECIFY OUTPUT SIGNAL__________________________________________________________

3) SPECIFY CALIBRATED DIFFERENTIAL PRESSURE RANGE_____________________________
4) SPECIFY ADDITIONAL OPTIONAL FEATURES________________________________________
5) SPECIFY INFORMATION FOR INSTRUMENT TAG____________________________________
Page 6
11DM Series Pneumatic

Differential Pressure
Transmitters
11DM
n
Differential
Pressure Measurement
ranges adjustable from 0-0.14 to 0-14.0
MPa (0-20 to 0-2000 psi) P
n
Low
Air Consumption

Product Specification Sheet PSS 2B-1A2 A.
The 11 DM Series Pneumatic Differential

Pressure Transmitters measure differential
pressure and transmit a proportional
pneumatic signal.
Span and Range Limits:
Span Limits
Span Limits Code
B
C
D
E
Span Limits Code
B
C
D
E
MPa P psi P
0.14 and 1.4
0.3 and 2.8
0.7 and 7.0
1.4 and 14.0
20 and 200
40 and 400
100 and 1000
200 and 2000
Range Limits (a), (b)

MPa P psi P
-1.54 and +2.4
-3.1 and +5.0
-7.7 and +10.0
-14.0 and +20.0
-220 and +350

-440 and +750
-1100 and +1500
-2000 and +3000
(a) Negative values indicate that the higher of the two

measured pressures is on the normal low side (body side)
of the transmitter. Positive values indicate higher pressure
is on the normal high side (connection block side). (b)
Nonzero-based ranges require optional Zero Elevation or
Suppression Kit.
Maximum Static Pressure:

The lower of the two measured pressures may
not exceed the following pressure limits:

Span Limits Code
B
C
D
E
MPa
psi
2.4
5.0
10.0
14.0
350
750
1500
2000

-40 and +120C (-40 and +250F).
Output Signal and Supply Pressure:

Output Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 kPa
20 psi
Accuracy:
Repeatability:
Hysteresis:
Span Limits codes B, C, and D: 0.1% of
calibrated span.
Span Limits code E: 0.2% of calibrated span.
Page 7
11DM
316 ss = AISI Type 316 stainless steel.

316L ss = AISI Type 316L stainless steel

Body
Capsule Bellows
Other Capsule Parts
Force Bar
Force Bar Seal
Force Bar Gasket
Capsule Gasket

316 ss
316L ss or Monel
316 ss or Monel
316 ss
cobalt-nickel
silicone elastomer
silicone elastomer
Body Bolts:
Mounting:
Bracket for DN 50 or 2 in vertical or horizontal

pipe.
Air Connections:

for 1/4 NPT.
Alloy steel per ASTM A193 Grade B7.

Cover:
High impact, glass filled polycarbonate.
Optional Features
NACE:
How To Order
1) SPECIFY MODEL NUMBER: 11DM-
Span Limits:

___ ___
___ - ___
0.14 and 1.4 MPa or 20 and 200 psi........................................................................... B

0.3 and 2.8 MPa or 40 and 400 psi.............................................................................C
0.7 and 7.0 MPa or 100 and 1000 psi.........................................................................D
1.4 and 14 MPa or 200 and 2000 psi..........................................................................E
Wetted Parts:
316ss .......................................................................................................................................S
316 ss except Monel bellows assembly.............................................................................. D
Process Connection:

1/4 NPT......................................................................................................................................................1
1/2 NPT......................................................................................................................................................2
R1/4 (metric).............................................................................................................................................3
R 1/2 (metric.............................................................................................................................................4
Zero elevation................................................................................................................................................... L
Zero suppression............................................................................................................................................. R

3) SPECIFY CALIBRATED PRESSURE RANGE___________________________________________
4) SPECIFY OPTIONAL FEATURES_____________________________________________________
Page 8
14A Series Pneumatic
Flow Integrators
(Flow)
14A
n
Durable
Self-cleaning, self-aligning ball and thrust

plate bearings
Gasketed cast aluminum cover
n
Versatile
Field or panel mounting up to several

hundred feet from point of measurement
n
Stable
Force balance unit minimizes variations in

air supply pressure or ambient temperature
n
Multiple
Ranges
Changeable counting speed can match
almost any flow range
No recalibration required
The 14A Series Pneumatic Flow Integrator

receives signal from transmitter, extracts
square root, and totalizes flow on integral
counter in engineering units.
For complete specifications, refer to General

Specification Sheet GS 2B-5A1 A.
PB, EB Series Only
Input Signal and Suppiy Pressure

Intput Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 kPa
20 psi
Counter:
6-digit, nonreset except PB and EB Series which
have 5-digit with manual reset.
Count Rates and Integrator Factors:
Count rate upper range values are shown in the
following table. Integrated flow is displayed directly when the count rate is set equal to the maximum
flow rate. Other flow rates can be accommodated
using the count rate times the integrator factor.
Example: Reading x 100 = Gallons.
Available Count Rate:
Upper Range Values
Counts per Minute

4.75 to 49.21
excluding:

5.46 to 5.54,

9.11 to 9.50,
and

10.93 to 11.08
Counts per Hour

285 to 2953
excluding:
328 to 332,
547 to 570,
and
656 to 665
Counts per Day

6840 to 70870
excluding:
7870 to 7980,
13120 to 13680,
and
15750 to 15960
Output Signal:
PB: Taken from supply pressure source and
going to 0 at termination of batch.
EB: Contact actuation either normally open or normally closed. Changes state at termination of batch.
Switch rating 3 A at 120 V ac, 0.5 A at 125 V dc.
Manual Reset:
Resets counter and batch contact.
Batch Set:
Manually set predetermining wheels on counter.
Brake Assembly:
To prevent coasting.
Electrical Classification (EB only):
Foxboro and CSA certified for use in ordinary
locations.
EP Series Only
Contact Actuation:
Either normally open or normally closed.
Electric relay circuit limits contact duration to
approximately 100 ms. Contact actuates once for
each 1,10, or 100 counts, as specified.
Supply Voltage:
120 V + 10%, -15%, 50 or 60 Hz.
Electrical Classification:
Foxboro and CSA certified for use in ordinary
locations.
Page 9
(Flow)
14A
Accuracy:
0.5% of full scale calibrated between 30 and
100% of flow.
Input Signal:
Input cutoff point set for approximately 7% flow.
Input startup point set for approximately 11 % flow.
Repeatability:
0.2% of full scale.
Body:
Cast aluminum with acrylic enamel finish.

Specification Cover
High-impact, glass-

14A Series
filled polycarbonate,

gasketed, weatherproof.

14A-PB,

14A-EB

Series

Case
High-impact, glass-
filled polycarbonate
Drawn steel, gray
and drawn steel, gray acrylic enamel finished,
acrylic enamel finish, gasketed, weatherproof.

High-impact, glass-

filled polycarbonate,

14A-EP Series
gray acrylic enamel

finish, gasketed,

weatherproof.
Drawn steel, gray

acrylic enamel finished,
Optional Features
External Reset Knob:
For panel-mounted PB and EB only.
Foxboro and CSA Certified:
For use in Class I, Groups A, B. C, and D,
Division 2. For EP Series only.
Page 10
Brake Assembly:
Standard on PB and EB Series. Eliminates
coasting of integrator rotor.
Integral Mounting to d/p Cell Transmitter:
For 14A-F, 14A-PBF,14AEBF, and 14A-EPF only.
Supply regulator included with this option.
(Flow)
14A
How to Order
1) SPECIFY MODEL NUMBER: 14A-
Integral Nonreset Counter:
_________
Panel-Mounted.............................................................................................................................................
Field-Mounted..............................................................................................................................................F
Field-Mounted with supply regulator.......................................................................................................FR
Integral Predetermining Counter and Pneumatic Output Signal:
Panel-Mounted............................................................................................................................................PB
Field-Mounted........................................................................................................................................... PBF
Field-Mounted with supply regulator.................................................................................................... PBFR
Integral Predetermining Counter and Electric Contact Actuation:
Panel-Mounted........................................................................................................................................... EB
Field-Mounted........................................................................................................................................... EBF
Field-Mounted with supply regulator.................................................................................................... EBFR
Integral Nonreset Counter and Electric Contact Actuation:
Panel-Mounted.........................................................................................................................................EP (a)
Field-Mounted.........................................................................................................................................EPF (a)
Field-Mounted with supply regulator..................................................................................................EPFR (a)
(a) Specify number of counts per contact actuation (1,10, or 100 counts).
2) SPECIFY ELECTRICAL CLASSIFICATION (EB and EP only)_____________________________

3) SPECIFY INPUT SIGNAL____________________________________________________________
4) SPECIFY COUNTS PER MINUTE, HOUR, OR DAY
(AT MAXIMUM FLOW RATE)_______________________________________________________
5) SPECIFY INTEGRATOR FACTOR____________________________________________________
6) SPECIFY INFORMATION FOR INSTRUMENT TAG_____________________________________
Page 11
(Pressure)
11GM, 11GH Series

Pneumatic Gauge
Pressure Transmitters
11GM, 11GH
n
11GMpressure
measurement ranges
adjustable from 0-0.07 to
0-14 MPa (0-10 to 0-2000 psi)
n
11GHpressure
measurement ranges
adjustable from 0-7.0 to 0-80 MPa
(0-1000 to 0-12000 psi)
n
Low
The 11GM, 11GH Series Pneumatic Gauge Pressure

Transmitters measure gauge pressure and transmit
a proportional pneumatic output signal.
Air Consumption

Span, Range, and Overrange Limits:

Series
psi

Series

11GM

A
B
C
D
E
0.07 and 0.56

0.14 and 1.4
0.3 and 2.8
0.7 and 7
1.4 and 14
10 and 80
20 and 200
40 and 400
100 and 1000
200 and 2000

11GM

11GH

K
N
7 and 40
14 and 80
1000 and 6000

2000 and 12000

Series
Span
Limits
Code
Span
Limits
Code
Span Limits
MPa
A
B
C
D
E

K
11GH

N
0.7
3.5
7
14
28
100
500
1000
2000
4000
62
124
9000
18000
(b) Overrange limit of Span Limits code E with Wetted Parts

code M on Page 13 is reduced to 21 MPa (3000 psi).
Range Limits (a)

MPa
Span
Maximum Overrange Pressure Limit (b)
Limits
Code
MPa
psi
psi

11GM

A
B
C
D
E
- 0.1 and +0.6

- 0.1 and +2.4
- 0.1 and +5
- 0.1 and +10
- 0.1 and +20
-15 and +90

-15 and +350
-15 and +750
-15 and +1500
-15 and +3000

11GH

K
N
- 0.1 and +40

- 0.1 and +80
-15 and +6000

-15 and +12000
(a) Nonzero-based ranges require optional zero elevation or

suppression kit. See HOW TO ORDER.
Output Signal and Suppiy Pressure

Output Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 kPa
20 psi

-40 and +120C (-40 and +250F).
Body Temperature Limits:
11GM Series: -40 and +190C (-40 and + 375F).
11GH Series: -40 and +120C (-40 and +250F).
Accuracy:

Series
11GM
Repeatability:
Spans Between
MPa psi
Accuracy
(% of Span)
All Spans
11GM Series:
0.5
Wetted Parts code S: 0.1% of calibrated span.

Wetted Parts code M: 0.2% of calibrated span.

11GH-K

7 and 20
20 and 40
1000 and 3000

3000 and 6000
0.5
1
11GH Series:

11GH-N

14 and 40
40 and 80
2000 and 6000

6000 and 12000
0.5
1
Page 12
(Pressure)
11GM, 11GH

Item
S
Element
Materials:
Cover: High-impact, glass-filled polycarbonate.
Wetted Parts Code

M
316ss
Monel
Connection
316ss
Monel
Block
Connection
Gasket
C
Ni-Span
Body Bolts: Alloy steel per ASTM A193 Grade B7.
316ss
Silicone
Viton-A (none)
Elastomer
Air Connections:
for 1/ 4 NPT.
Optional Features
Air Supply Set:
High Accuracy Calibration (11GM only):

Accuracy of +0.25% of calibrated span.
Pressure Seals:
Refer to Page 34.
NACE (11 GM only):


How to Order
1) SPECIFY MODEL NUMBER: 11GM- ___ ___ ___ - ___
Span Limits:

0.07 and 0.56 MPa or 10 and 80 psi................................................................................... A

0.14 and 1.4 MPa or 20 and 200 psi................................................................................... B
0.3 and 2.8 MPa or 40 and 400 psi..................................................................................... C
0.7 and 7 MPa or 100 and 1000 psi.................................................................................... D
1.4 and 14 MPa or 200 and 2000 psi.................................................................................. E
Wetted Parts:
316ss ............................................................................................................................................... S
Monel (a)..........................................................................................................................................M
Process Connection:

1/4 NPT......................................................................................................................................................1
1/2 NPT......................................................................................................................................................2
R1/4 (metric).............................................................................................................................................3
R1/2 (metric).............................................................................................................................................4
Machined for 9/16-18 Aminco fitting (b)..............................................................................................5
Optional Features: (also see above)
Zero elevation................................................................................................................................................... L
(a) Not available with Span Limits code A above.
(b) Not available with Span Limits code A or Wetted Parts code M above.
Page 13
(Pressure)
11GM, 11GH

1) SPECIFY MODEL NUMBER: 11GH- ___ ___

C ___ - ___
Span Limits:
7 and 40 MPa or 1000 and 6000 psi................................................................................... K

14 and 80 MPa or 2000 and 12000 psi............................................................................... N
Wetted Parts:
Ni-Span element with 316 ss connection....................................................................................C
Process Connection:
1/2 NPT......................................................................................................................................................2
R 1/2 (metric)............................................................................................................................................4
Machined for 9/16-18 Aminco fitting....................................................................................................5
Zero elevation................................................................................................................................................... L

3) SPECIFY CALIBRATED PRESSURE RANGE___________________________________________
Page 14
11AL, 11AM, 11AH Series
Pneumatic Absolute
Pressure Transmitters
(Pressure)
11AL, 11AM, 11AH
n
11ALadjustable
for ranges from 0-1.3 to

0-5.3 kPa (0-10 to 040 mmHg) absolute
n
11AMadjustable
for ranges from 0-5.3

to 0-200 kPa (0-40 to 01520 mmHg)
absolute
11AH
n
11AHadjustable
for ranges from 0-0.7

to 0-2.7 MPa (0-10 to 0400 psi) absolute
n
Low
air consumption
11AM

11AL
The 11AL, 11AM, 11AH Series Pneumatic Absolute

Pressure Transmitters measure absolute pressure
and transmit a proportional pneumatic output signal.
Span, Range, and Overrange Limits (in absolute pressure units):

Series

Span
Limits
Code

Series
Span Limits
Span
Limits
Code
Maximum Overrange Pressure Limit

psi
1.3 and 5.3kPa
10 and 40 mmHg

11AM

M
H
5.3 and 53 kPa

50 and 200 kPa
40 and 400 mmHg

375 and 1520 mmHg

11AM

M 0.8
H
1.1
115
165

11AH

A
B
C
0.07 and 0.55 MPa

0.14 and 1.4 MP
0.3 and 2.7 MP
10 and 80 psi
20 and 200 psi
40 and 400 psi

11AH

A
B
C
100
350
750

Series

11AL L
MPa
11AL
0.8
0.7
2.4
5.2
115
Maximum Process Temperature:

120C (250F) at capsule.
Span
Limits Range Limits (a)
Code
11AL
0 and 9.3 kPa
0 and 70 mmHg

11AM

M
H
0 and 53 kPa
0 and 200 kPa
0 and 400 mmHg

0 and 1520 mmHg

11AH

A
B
C
0 and 0.62 MPa

0 and 2.4 MPa
0 and 5 MPa
0 and 90 psi
0 and 350 psi
0 and 750 psi
(a) Nonzero-based ranges require optional zero suppression

kit (standard for 11AM). See HOW TO ORDER.

-40 and + 120C (-40 and +250F).

Output Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 kPa
20 psi
Accuracy:

Series

11AL
Spans Between
kPa mmHg
All Spans
Accuracy
(% of Span)
1.0%

11AM-M

5.3 and 13
13 and 53
40 and 100
1100 and 400
0.5%
1.0%

11 AM-H

50 and 113
113 and 200
|375 and 850

1850 and 1520
0.5%
1.0%
11AH
All Spans
0.5%
Repeatability:
11AL Series: 0.5% of calibrated span.
11AM, 11AH Series: 0.1% of calibrated span.
Hysteresis:
11AL Series: 0.5% of calibrated span.
11AM Series: 0.25% of calibrated span.
11AH Series: 0.15% of calibrated span.
Page 15
(Pressure)
11AL, 11AM, 11AH

Wetted Part
Materials:
Body Bolting: Alloy steel per ASTM A193 Grade B7.
Body Material
AISI 316 ss
Capsule Diaphragm
AISI 316L ss
Other Capsule Parts
316 ss

Force Bar
316 ss

Force Bar Seal
cobalt-nickel

Force Bar Gasket
silicone elastomer

Capsule Gasket
316 ss (a)
Process Connector Gasket
ptfe (a)
Monel
Monel
Monel
Monel
cobalt-nickel
Viton-A
Monel
ptfe
(a) 11AH Series uses single silicone elastomer gasket as

capsule and connector gasket.
Cover: High-impact, glass-filled polycarbonate.

Mounting:
Bracket for nominal DN 50 or 2 in pipe.
Meets IEC IP53 and provides the protection of
NEMA Type 3.
Air Connections:
for 1/4 NPT.
Optional Features
Air Supply Sets:
Adjustable regulators with or without output
gauge.

How to Order
1) SPECIFY MODEL NUMBER: 11AL- ___

L ___
S ___ ___
Span Limits:
1.3 and 5.3 kPa or 10 and 40 mmHg absolute.................................................................L
Body Material:
AISI Type 316 stainless steel (316 ss)..........................................................................................S
Process Connections:

Tapped for 1/4 NPT............................................................................................................................... 1

Tapped for 1/2 NPT............................................................................................................................... 2
Tapped for R1/4 (metric)....................................................................................................................... 3
Welding neck for 14 x 21 mm tube and 1/2 in Schedule 80 pipe.................................................. 6
Optional Zero Suppression...........................................................................................................................R

Page 16
(Pressure)
11AL, 11AM, 11AH
How to Order
1) SPECIFY MODEL NUMBER: 11AM - ___ ___ ___
Span Limits:
5.3 and 53 kPa or 40 and 400 mmHg absolute............................................................... M

50 and 200 kPa or 375 and 1520 mmHg absolute......................................................... H
Body Material:
316ss ............................................................................................................................................. S
Monel Not available with Span Limits code H above..............................................................M

Tapped for 1/4 NPT............................................................................................................................... 1

Tapped for 1/2 NPT............................................................................................................................... 2
Welding neck for 14 x 21 mm tube and 1/2 in Schedule 80 pipe.................................................. 6
1) SPECIFY MODEL NUMBER: 11AH- ___ ___

S ___ ___
Span Limits:
0.07 and 0.55 MPa or 10 and 80 psi absolute................................................................. A

0.14 and 1.4 MPa or 20 and 200 psi absolute..................................................................B
0.3 and 2.7 MPa or 40 and 400 psi absolute................................................................... C
Body Material:
316 ss ............................................................................................................................................. S
Tapped for 1/2 NPT............................................................................................................................... 2

Optional Zero Suppression...........................................................................................................................R

3) SPECIFY CALIBRATED ABSOLUTE PRESSURE RANGE________________________________
Page 17
(Liquid Level and Density)
Pneumatic Liquid Level

or Density Flanged
d/p Cell Transmitters
15F, 13F, 13FE
n
15F
Low Range Flush Diaphram

Transmitter adjustable for ranges from
0-0.13 to 0-0.63 m (0-5 to 0-25 in) head
of water
n
13F
Flush Diaphram Transmitter

adjustable for ranges from 0-0.51 to
0-21.6 m (0-20 to 0-850 in) head of
water
n
13FE
Extended Diaphram Transmitter

for measurements from 0-0.51 to 0-21.6
m (0-20 to 0-850 in) head of water
The 15F, 13F, 13FE Series Pneumatic

Liquid Level or Density Flanged d/p Cell
Transmitters measure hydrostatic head
of liquid and transmit a proportional
pneumatic output signal.
n
Low
Air Consumption

Product Specification Sheet PSS 2B- 1D2 A.
Span Limits:

Span
Limits
Series Code
Span Limits (Head of Water)

meters
inches
15F
0.13 and 0.63
5 and 25
13F,
13FE
M
H
0.51 and 6.3

5.1 and 21.6
20 and 250
200 and 850
Range Limits:

Span
Range Limits (Head of Water) (a)
Limits
Series Code
meters
inches
15F
1.3
50
13F,
13FE
M
H
6.3
21.6
250
850

ANSI Flanges: -40 and +190C (-40 and +375F).
DIN Flanges:
-40 and +120C (-40 and +250F).
-40 and +120C (-40 and +250F).

Output Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 kPa
20 psi
(a) Non zero-based ranges require optional zero elevation

or suppression kit. Upper and lower range values must not
exceed range limits. Negative numbers indicate a higher
pressure on the normal low side of the transmitter, such as
may occur in a closed tank application with a wet leg.
Accuracy:
0.5% of calibrated span for all models except
for spans greater than 13.3 m (525 in) head of
water which are 0.75%.
Repeatability:
Page 18
Hysteresis:
15F Series: 0.1 % of calibrated span or 0.25 mm
(0.01 in) head of water, whichever is larger.
13F and 13FE Series: 0.1 % of calibrated span
or 1.25 mm (0.05 in) head of water, whichever is
larger.
(Liquid Level and Density)

15F, 13F, 13FE
Body and Flange Material:
Zinc cobalt-plated carbon steel or 316 ss (b), as
specified.
High Pressure Side:
Capsule Diaphragm: 316L ss (c).
Other Capsule Parts: 316 ss.
Capsule Gaskets:
15F,13F Series: 316 ss.
13FE Series: None.
Retaining Ring (d): 316 ss.
Low Pressure Side (Partial List):
Capsule Diaphragm: 316L ss.
Force Bar: 316 ss.
Force Bar Seal: Cobalt-nickel.
Force Bar Gasket: Silicone elastomer.
Capsule Gaskets:
15F, 13F Series: 316 ss.
13FE Series: ptfe.
Mounting:
Provided by process connection flange. See
HOW TO ORDER.
Nominal Diaphragm Extension Length A

(13FE Series): See HOW TO ORDER.
Flange Extension Length B:
15F and 13FE Series: 125 mm (5 in).
13F Series: 125 or 200 mm (5 or 8 in), as specified.
(b) AISI Type 316 stainless steel.

(c) AISI Type 316L stainless steel.
(d) Raised face portion of flange.
Cover Material:
High-impact, glass-filled polycarbonate.
Optional Specifications
Wetted Parts Materials:
Monel, Duranickel, Hastelloy C, tantalum, and
various coatings.
High Process Temperature:
To 315C (600F).
Lower Spans:
Provides spans as low as one-half standard.
Air Supply Sets:
How to Order
1) SPECIFY MODEL NUMBER: 15F- - L 5 -
Transmitter:
316 ss body and flange...........................................................................................A
Zinc cobalt-plated carbon steel body and flange..............................................A1
Span Limits:
0.13 and 0.63 m or 5 and 25 in head of water.............................................................L
Body and Flange Material; and Connection:

Zinc cobalt-plated carbon steel 6 in ANSI Class 150.......................................................... K61A

316 ss
6 in ANSI Class 150...........................................................S61A
Zinc cobalt-plated carbon steel 150 mm,16 Bar, DIN, and BS.......................................... K61D
316 ss
150 mm,16 Bar, DIN, and BS.......................................... S61D
Flange Extension Length:
125 mm (5 in)............................................................................................................................................ 5
Elevation or Suppression (Optional):

Page 19
Pneumatic Transmitters (Liquid Level and Density)

15F, 13F, 13FE

1) SPECIFY MODEL NUMBER: 13F-
Transmitter:
___ - ___ ______ ___ - ___
316 ss body and flange........................................................................................... A

Zinc cobalt-plated carbon steel body and flange.............................................. A1
Span Limits:
0.51 and 6.3 m or 20 and 250 in head of water.......................................................... M

5.1 and 21.6 m or 200 and 850 in head of water.........................................................H

Carbon steel 3 in ANSI Class 150..........................................................................................K31A

Carbon steel 3 in ANSI Class 300......................................................................................... K33A
316 ss
3 in ANSI Class 150..........................................................................................S31A
316 ss
3 in ANSI Class 300..........................................................................................S33A
Carbon steel 80 mm,10/40 Bar, DIN, and BS...................................................................... K33D
316 ss
80 mm,10/40 Bar, DIN, and BS...................................................................... S33D
125mm(5in)............................................................................................................................................... 5
200 mm (8 in)............................................................................................................................................ 8

1) SPECIFY MODEL NUMBER: 13FE- -

Transmitter:
5 -
316 ss body and flange.................................................................................. A

Zinc cobalt-plated carbon steel body and flange..................................... A1
Span Limits:
0.51 and 6.3 m or 20 and 250 in head of water..................................................M

5.1 and 21.6 m or 200 and 850 in head of water................................................ H

Zinc cobalt-plated carbon steel

316 ss
316 ss
316 ss
316 ss
4 in ANSI Class 150....................................................K41A

4 in ANSI Class 300....................................................K43A
4 in ANSI Class 150....................................................S41A
4 in ANSI Class 300....................................................S43A
100 mm,16 Bar, DIN, and BS....................................K41D
100 mm, 40 Bar, DIN, and BS...................................K43D
100 mm,16 Bar, DIN, and BS....................................S41D
100 mm, 40 Bar, DIN, and BS...................................S43D
125 mm (5 in)................................................................................................................................... 5
Nominal Diaphragm Extension Length:
50 mm (2 in)..............................................................................................................................................2
100 mm (4 in)............................................................................................................................................4
150 mm (6 in)............................................................................................................................................6


Page 20
13DMP, 13DEMP Series
Pneumatic d/p Cell
Transmitters With Matched
Pressure Seals for Liquid
Level Measurement
n
Low
(Liquid Level)
13DMP, 13DEMP
Air Consumption
n
13DMPFLUSH
connections
TYPE with 3-inch flange
n
13DEMPEXTENDED
flange connections
TYPE with 4-inch
n
Pressure
Seals
Eliminate problems caused by repeaters
and wet and dry legs
Make installation and adjustments easier
than other approaches
Provide positive isolation with a minimum
of process wetted parts
Allow higher process temperatures
n
Ideal
for Pressurized or Evacuated

Vessels
The 13DMP, 13DEMP Series Pneumatic d/p

Cell Transmitters with matched pressure seals
measure differential pressure and transmit a
proportional pneumatic output signal.
For complete specifications, refer to Product

Specification Sheet PSS 2B-1C1 B.
Span and Range Limits:
Span Limits (Head of Water)

Series meters inches
13DMP-M,13DEMP-M
13DMP-H,13DEMP-H
0.51 and 6.4

5.1 and 21.6
20 and 250
200 and 850
Range Limits (Head of Water) (a)

Series meters inches
13DMP-M,13DEMP-M
13DMP-H,13DEMP-H
- 6.4 and +6.4

-21.6 and +21.6
-250 and +250

-850 and +850
(a) Negative numbers indicate a higher pressure on the

normal Low Side of the transmitter.

-37 and +150C (-35 and +300F).
-37 and +80C (-35 and +180F).

Output Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 kPa
20 psi
Accuracy:
Spans (Head of Water) Between

meters
inches

0.51 and 13
13 and 21.6
20 and 525
525 and 850
Accuracy (b)
% of Span
0.5
1.0
Repeatability:
Hysteresis:
(b) Includes linearity, hysteresis, and repeatability.
Page 21
(Liquid Level)
13DMP, 13DEMP

Remote Seal
Diaphragms
Raised Face Backup

Pads (Gasket Surface)
AISI Type 316L

stainless steel
(316L ss)
AISI Type 316

stainless steel
(316 ss)
Hastelloy C276
Hastelloy C
Tantalum
Materials of Nonwetted Parts:

Description
Material

Flanges
Capillary

Transmitter Body

Fill Fluid
316 ss or carbon steel

316ss
316ss
DC 200 silicone (c)
(c) Relative density (specific gravity) is 0.90 at 25C (77F).
Capillary Lengths:
See HOW TO ORDER.
Mounting:
Seals mount by process connection flanges. See
HOW TO ORDER. Transmitter body mounts to
bracket for DN 50 or 2 in vertical or horizontal
pipe.
Cover Material:
High-impact, glass-filled polycarbonate.
Air Connections:
for 1/4 NPT.
Optional Specifications
Air Supply Set:
High Temperature Fill:

For process temperatures up to 300C (580F).
How to Order
1) SPECIFY MODEL NUMBER: 13DMP-
___ ___ ___ ______
Span Limits:
0.51 and 6.4 m or 20 and 250 in head of water.......................................................... M

5.1 and 21.6 m or 200 and 850 in head of water........................................................ H
Wetted Parts Material:
316 ss with 316L ss diaphragm...............................................................................................S

Hastelloy C with Hastelloy C276 diaphragm........................................................................ C
Tantalum.....................................................................................................................................T
Capillary Length (each capillary):
1.5m( 5ft)............................................................................................................................................ A
4.5m(15ft)........................................................................................................................................... B
8 m (26 ft)........................................................................................................................................... C
Process Connections (nonprocess wetted):


316 ss
316 ss
316 ss
316 ss
Page 22
3 in ANSI Class 150........................................................................K31A

3 in ANSI Class 300........................................................................K33A
3 in ANSI Class 600........................................................................K36A
3 in ANSI Class 150........................................................................S31A
3 in ANSI Class 300........................................................................S33A
3 in ANSI Class 600........................................................................S36A
80 mm 10/40 Bar, DIN and BS.....................................................K33D
80 mm 10/40 Bar, DIN and BS.....................................................S33D
(Liquid Level)
13DMP, 13DEMP

1) SPECIFY MODEL NUMBER: 13DEMP- ___ ___ ___ ___ ______
Span Limits:
0.51 and 6.4 m or 20 and 250 in head of water................................................. M

5.1 and 21.6 m or 200 and 850 in head of water................................................H
Wetted Parts Material:
316 ss with 316L ss diaphragm.......................................................................................S

Hastelloy C with Hastelloy C276 diaphragm................................................................ C
Capillary Length (each capillary):
1.5m (5 ft).................................................................................................................................. A
4.5m (15 ft)................................................................................................................................ B
8m (26 ft)................................................................................................................................... C
Extension Length:
50mm (2 in).........................................................................................................................................2
100mm (4 in).......................................................................................................................................4
150mm (6 in).......................................................................................................................................6
Process Connections (nonprocess wetted): Carbon steel, 4 in ANSI
Class 150.....................................................................................................................................................K41A
Class 300.....................................................................................................................................................K43A
Class 600.....................................................................................................................................................K46A

Note: For liquid level applications, zero elevation kits always required due to wet leg effect of filled seal
system; therefore, it is a standard part of the 13DMP and 13 DEMP Series Transmitters.
Page 23
(Temperature)
P12A Series Pneumatic

Temperature Transmitters
12A
n
Trouble-Free
Force balance mechanism has no moving

parts
n
Accurate
n
Responsive
Comparable to an unsheathed thermocouple

n
Simple
Range Change
Span can be elevated or suppressed 100%
Adjustment involves only three parts
n
Easy
Installation
A variety of mounting positions
The 12A Series Pneumatic Temperature
Transmitters measure temperature and transmit
a proportional pneumatic output signal.
n
Low
Air Consumption

Specification Sheet PSS 2B-1B1 A.
Range Limits, Spans, and Maximum Overrange Temperatures (Maximum ORT):

Sensor
Fahrenheit (F)
Sensitive

Length X
Range Limits
Maximum
Series mm in Lower Upper Span ORT

Sensor
Celsius (C)
Sensitive

Length X
Range Limits

Maximum
Series mm in Lower Upper
Span
ORT

12A*
and 150 6
12AS*

-100 +330 50
-100 +1000 100
-100 +1000 125
-100 +1000 150
-100 +1000 200
330
1000
1000
1000
1000

12A*

and 150 6

12AS*

-75 +125 25
-75 +460 50
-75 +550 75
-75 +550 100
125
460
550
550

75 3

12A

and 75 3

12AS or
or

150 6

-100 +150 50
-100 +650 100
-100 +850 150
-100 +1000 200
330
1000
1000
1000

75 3
12A
and
-75 +70 25
-75 +300 50
-75 +550 75
-75 +550 100
125
460
550
550
-100 +1000 250

-100 +1000 300
-100 +1000 400
-40 +1000 500
1000
1000
1000
1000
12AS 75 or 3 or
-75
+550
150
150 6 -75 +550 200
550
550

0 +1000 600
150 6
+200 +1000 800
1000
1000

12A-C 150 6

330
600
600
600
600
600
-350 +330 50
-350 +400 100
-300 +600 150
-250 +600 200
-200 +600 250
-150 +600 300
75 3 -250 +600 200

12A-H 150
6

+600 +1400 400

+500 +1400 500
+400 +1400 600
+300 +1400 700
+200 +1400 800
600
1400
1400
1400
1400
1400
*See statement under PERFORMANCE SPECIFICATIONS.
150 6
0 +550 300
550

150 6
12A-C

-210 +125 25
-220 +200 50
-170 +320 100
-140 +320 150
-95 +320 200
125
320
320
320
320
75 3 -160 +320 100
320
+350 +760 200

12A-H 150
6
+250 +760
300
+150 +760 400
760
760
760
Output Signal: 20 to 100 kPa or 3 to 15 psi.

-35 and +80=C (-30 and +180F). The vinyl
covered portion of the capillary tubing must be
in an area between -55 and +105C (-65 and
+220F).
Supply Pressure: 140 kPa or24 20 psi.
Page 24
(Temperature)
12A
(12A and 12AS Series with range limits, spans,
and sensitive lengths as noted by asterisks in
Range Limits table.)
Accuracy (Includes linearity, hysteresis, and
repeatability): 0.5% of calibrated span.
Repeatability:
Step Response Time (Basic thermal system and
agitated water bath): Maximum of 12 seconds for a
90% recovery from a step change on a bare sensor
and less than 2 seconds for a 63% recovery.
Body:
Die-cast, low copper aluminum alloy with baked
gray vinyl finish.
Cover:
Blue, high impact, glass filled polycarbonate.
Environmental Protection:
The transmitter housing is weatherproof. It
is dust-protected as defined in IEC IP53 and,
with its constant air purging, provides the
environmental protection of NEMA Type 3.
Thermal System:
SAMA (Scientific Apparatus Makers Association)
Class IIIB gas pressure system.
Connecting Tubing:
Vinyl covered AISI Type 302 stainless steel (302
ss) flexible armor over 316 ss capillary. The
length is 1m (3.5 ft).
Bushings:
Fabricated of 316 ss and available with R1/2,
R3/4, R1, G1/2B, G3/4B, G1B, 1/2 NPT, 3/4 NPT,
or 1 NPT external thread and 1-18 NS internal
thread. Bushing not required if temperature is
well specified.
Sensor:
Fitted with an adjustable union and bendable
extension. The jam nut has an external 1-18
UNS thread. All process wetted parts are 316 ss
except for the 12A-H Series, which has a sensor
and bendable extension fabricated of Inconel.
Also, the 12A-H Series has a fixed union.
Diameter (Y): 9.53 mm (0.375 in).
Sensitive Length (X): 75 or 150 mm (3 or 6 in).
Extension Length (J): 450 mm (18 in). the J
dimension for the 12A-A Series must be long
enough to limit the temperature of the capillary
tubing to 105C (220F).
Insertion Length (U): 200 to 530 mm (8 to 21 in),
adjustable.
Immersion Length (R): As specified.
Air Connections:
for 1/4 NPT.
Plain Bendable Sensor with Adjustable Union:
Adjustable Union Packing:

ptfe: For temperatures up to 205C (400F).
Graphite Impregnated Inconel Mesh: For
maximum temperature of 540C (1000F).
Optional Features
Air Supply Sets:
Available as fixed or adjustable filter regulators
with or without gauges. Refer to Page 27.
Sausage Type Sensors:
For measurement of gas temperature in ducts or
flues.
Thermowells:
For mechanical or corrosive protection. Refer to
Page 35.
Derivative Unit:
Compensates for thermal lag in process.
Intermediate Spans:
Spans different from those listed in table under
FUNCTIONAL SPECIFICATIONS.
Optional Thermal System Configurations:
Other connection tubing, sensor types, and
mounting are available.
Page 25
(Temperature)
12A
How to Order
1) SPECIFY MODEL NUMBER:
________ ______ ____ ___ ___ ___
Transmitter with Basic Thermal System

and Code 3542 Sensor...................................................................... 12A
Cryogenic Thermal System
and Code 3542 Sensor.................................................................... 12A-C
High Temperature Thermal System
and Code 3482 Sensor.................................................................... 12A-H
Sanitary Thermal System
(see additional specifications below).......................................... 12AS
ADDITIONAL SPECIFICATIONS FOR
12AS SERIES SANITARY THERMAL SYSTEMS ONLY:
Sensor Code:........................................................................................................... 3242
Connector:

16A Bevel Seat...................................................................................................................... S1

16AMP Clamp Seat............................................................................................................... S2
Type RJT................................................................................................................................. S3
Type ISS.................................................................................................................................. S4
ISO Clamp Flange................................................................................................................. S5
DIN Seat................................................................................................................................. S6
Nominal Line Size:
25 mm (1 in)..................................................................................................................................... A
40mm(1 1/2in)................................................................................................................................. B
50 mm (2 in)..................................................................................................................................... C
65mm(21/2in).................................................................................................................................. D
75 mm (3 in}..................................................................................................................................... E
100 mm (4 in)................................................................................................................................... F
Sensor Sensitive Length (X):
75mm (3 in)...............................................................................................................................................R
150 mm (6 in)............................................................................................................................................T
Capillary Tubing Length:
1 m (3.5 ft)......................................................................................................................................................... N
3 m (10 ft).......................................................................................................................................................... P

3) SPECIFY RANGE LIMITS AND SPAN_________________________________________________
4) SPECIFY CALIBRATED RANGE______________________________________________________
5) SPECIFY SENSOR CODE___________________________________________________________
6) SPECIFY CONNECTING TUBING LENGTH___________________________________________
7) SPECIFY SENSOR DIMENSIONS____________________________________________________
A. Diameter (Y) [9.53 mm (0.375 in) standard]________________________________________
B. Length (X) [75 or 150 mm (3 or 6 in)see Range Limits table]________________________
C. Extension length (J) [450 mm (18 in) standard]_____________________________________
D. Insertion length (U)______________________________________________________________
E. Immersion length (R) _____________________________________________________________
8) SPECIFY BUSHING EXTERNAL THREAD (if required)__________________________________
10) SPECIFY INFORMATION FOR INSTRUMENT TAG AND APPLICATION________________
Page 26
(Miscellaneous)
BYPASS MANIFOLDS, AIRSETS, 17BT, 17BS,45P
Bypass Manifolds
A variety of 3 and 5 valve manifolds is available

for fast, convenient zero checks and adjustment
of transmitters, and to isolate the transmitter
from the process for maintenance.
17BT, 17BS Series Pneumatic

Buoyancy Transmitters for
Liquid Level Measurement
17BT and 17BS Series Pneumatic

Buoyancy Transmitters measure
and transmit liquid level interface
level, or density by sensing
changes in buoyant force exerted
on a fixed displacer element. They
can be flange-mounted to the top
or side of the vessel which may be
vented, pressurized, or evacuated.
Displacer lengths range from
356 to 3810 mm (14 to 150 in) or
longer when required.
Air Supply Pressure Regulators

and Filters (Airsets)
A broad selection of air pressure

regulators, filters, and combination
filter/regulators is available.
They are used with pneumatic
instruments requiring a regulated
filtered air supply.
45P Series Pneumatic

Indicating Transmitters
45P Series Pneumatic

Indicating Deflection Type
Transmitters measure
pressure, temperature,
differential pressure, or
liquid level, depending
on element selection, and
transmit a proportional
20 to 100 kPa or 3 to 15
psi signal.
Page 27

Using primary measurement elements, you can adapt many instruments to
specific applications.
Foxboro makes elements for all types of measurements flow, pressure,
temperature, moisture, and humidity.
Orifice Plates and Flange Unions

Used with differential pressure meters to measure flow rate.
Pressure Seals
Ideal for measuring corrosive, viscous, or hot fluids.
Thermocouple/RTDs
Numerous configurations for use with transmitters,recorders, and controllers.
Thermowells
Protect thermocouples and RTDs from damaging process materials.
Dewcel Elements
The most accurate, reliable way to measure moisture and humidity.
These elements are designed for use with both pnuematic and electronic devices.
With them, you can count on the high performance and dependability you expect
from all Foxboro instruments.
Page 28

Orifice Plates and
Flange Unions
n
Proven
(Orifice Plates, Flange Unions)

ORIFICE PLATES, FLANGE UNIONS
Performance
Widely recognized as the industry

standard
n
Versatile
Works with either a d/p Cell Transmitter

or a bellows meter
n
Broad
Choice of Sizes and Materials
For just about any line size or application

Specification Sheet PSS 3-5A1 A.
Orifice Plates are used with differential

pressure meters to measure flow rate.
Orifice Plate Specifications

Material:
These plates conform to National Association of
Corrosion Engineers (NACE) Standard MR-01-75.
Flange Type Rating:
ANSI Class 150, 300, 400, or 600, as specified.
Bore:
Concentric, with sharp and square inlet edge. Plate
is beveled if required by conformity specifications.
Nominal Plate Thickness:
4 mm (0.125 in) for 25 to 200 mm (1 to 8 in) pipe
sizes, 7 mm (0.250 in) for 250 to 350 mm (10 to
14 in) pipe sizes, and 10 mm (0.375 in) for 400 to
500 mm (16 to 20 in) pipe sizes.
Legend:
Upstream side of tab handle marked inlet and
with bore size and flange type/rating. Downstream
side marked with trademark, material, and tag.
Conformity (Specifications and Computations):
Finish: Number 4 (45 microinch or better).
Dimensions:
Meet the intent of applicable portions of ASME
Fluid Meters (Sixth Edition) and/or AGA Report
3 (1969), adopted as ANSI/API 2530.
Computations:
According to R.W. Millers Flow Measurement
Engineering Handbook. This handbook is available
from Foxboro. Refer to Part No. B0150YW.
Orifice Flange Union Specifications

Orifice Flange Unions are furnished in accordance
with latest AGA and ASME code recommendations.
Construction:
Unions include 2 flanges, 2 jackbolts with nuts, 2
composition gaskets, 4 pipe plugs, and bolting.
Material:
Flanges: ASTM A-105 carbon steel, ASTM A-182
F304 ss, or ASTM A-182 F316 ss, as specified.
Pressure Tap Connections:

2 sets per union, 180 degrees apart. Class
300 and 600 unions are threaded for 1/2-inch
pipe nipples. Class 900 and 1500 unions are
threaded for 3/4-inch pipe nipples. The pressure
tap hole diameter is: 6.35 mm (0.25 in) for 65
mm (2 1/2 in) pipe size and smaller, 9.53 mm
(0.375 in) for 80 mm (3 in), and 12.7 mm (0.50
in) for 100 mm (4 in) pipe size and larger.
Bolting:With steel on stainless steel flanges;

ASTM A193 Grade B7 alloy steel stud bolts with
ASTM A194 Grade 2H nuts.
Optional Features
Reverse Flow:
For reverse flow applications, the plate is bored and
finished equally on both faces and the bore is not beveled. The plate must be used with symmetrical taps.
Preparation for Nuclear, Oxygen, or Chlorine
Service is Available.
Optional Orifice Bores:

Eccentric, segmental, or quadrant edge bore.
Materials of Construction:
Hastelloy C, Monel, Alloy 20, and titanium are
available.
Page 29
(Orifice Plates, Flange Unions)
ORIFICE PLATES, FLANGE UNIONS
Optional Features (continued)

High Temperature and High Differential
Pressure Operation:
The Orifice Plate may warp if the temperature of
the process fluid exceeds 200C (400F) and the
differential pressure (P) is greater than 50 kPa
(200 inH2O). Refer to Foxboro for determination
of the plate thickness for these conditions.
Drain or Vent Hole:

Plate drilled with recommended maximum
diameter hole to applicable standard.
Other materials of construction, flange
ratings, plate thickness, and line size are
available.
How to Order
1) SPECIFY ORIFICE PLATE CODE:

____________ - _____ _____

SERIES 120
Plate, Foxboro Tab Type................................................................................ SERIES 120

Material: ASTM A-240 Type
304 ss..............................................................................................................................................304
316 ss..............................................................................................................................................316
For use with Flange Type Rating: ANSI Class
150................................................................................................................................................................ 150
300................................................................................................................................................................ 300
400................................................................................................................................................................ 400
600................................................................................................................................................................ 600
2) SPECIFY NOMINAL LINE (PIPE) SIZE AND SCHEDULE NUMBER_______________________

3) SPECIFY ORIFICE DIAMETER OR SUPPLY COMPLETED FLOW DATA SHEET
(Refer to Foxboro)_________________________________________________________________
5) SPECIFY INFORMATION FOR IDENTIFICATION TAG_________________________________
1) SPECIFY FLANGE UNION CODE:
_____ ____ - _____ _____
Style:
Slip-On................................................................................................................. FU-S
Threaded............................................................................................................. FU-T
Welding-Neck.....................................................................................................FU-W
Flange Facing:
Raised Face........................................................................................................................ RF
Ring Joint (Not available with FU-T)............................................................................... RJ
Material:
ASTM A-105 Carbon steel........................................................................................................... CS

ASTM A-182 F304 ss.....................................................................................................................304
ASTM A-182 F316 ss.....................................................................................................................316
ANSI Rating:

Class 300...................................................................................................................................................... 300

Class 600 (Not available with FU-T).......................................................................................................... 600
Class 900 (Not available with FU-T).......................................................................................................... 900
Class 1500 (Not available with FU-T)....................................................................................................... 1500
2) SPECIFY NOMINAL LINE (PIPE) SIZE________________________________________________

3) SPECIFY PIPE SCHEDULE NUMBER OR ACTUAL INTERNAL DIAMETER FOR
WELDING-NECK TYPE UNIONS____________________________________________________
5) FOR DIFFERENTIAL PRESSURE TRANSMITTER, REFER TO: Page 3.
Page 30
(Integral Flow Orifice Assemblies-IFOA)
Integral Flow Orifice

Assemblies (IFOA) Series
IFOA
n
The
IFOA has very high accuracy when

equipped with associated piping
n
The
IFOA can be used with any

differential pressure transmitter
having standard process connections
n
Process
wetted materials are available

for use with both corrosive and
noncorrosive fluids
n
The
transmitter can be either integrally

coupled or remotely connected
The IFOA Series Integral Flow Orifice

Assemblies adapt electronic and/or
pneumatic d/p Cell Transmitters for
measuring small flow rates.
n
Process
wetted material meets NACE

Standard MR-01-75

Product Specification Sheet PSS 3-5A1 B.
Specifications
Assemblies with Associated Piping:
Flange Material:
Forged 316 ss ASTM A182-F316.
Body Material:
Cast AISI Type 316 ss ASTM A351 Grade CF-8M
stainless steel.
Assemblies without Associated Piping:

Body Material:
Cast AISI Type 316 ss ASTM A351 Grade CF-8M
stainless steel or cast Hastelloy C Grade CW-2M
per ASTM A494/A494M-86, as specified.
Piping Material:
Seamless stainless alloy steel pipe to ASTM
A-312 Grade TP-316, Schedule 40 for the 15
and 25 mm (1/2 and 1 in) sizes, Schedule 80 for
the 40 mm (1 1/2 in) size.
Both Types:
Static Pressure Rating and Process Temperature Limits:

Assembly
Static Pressure Rating and

Size
Process Temperature Limits (a)
End

Connection
mm
in
SI Units

15 1/2

WELD

25 1

ENDS

40
1 1/2

15 & 25 1/2 & 1
THREADED

ENDS
40
1 1/2

U.S.Units
20
16
MPa from -40 to +40C

MPa at 150C
3000 psi from -40 to +100F

2300 psi at 300F
14
10.5

MPa at 150C
2000 psi from -40 to +100F

1550 psi at 300F
5
4

MPa at 150C
750 psi from -40 to +100F

580 psi at 300F
1500 psi from -40 to +300F

MPa at 150C
750 psi from -40 to +100F

580 psi at 300F
10
5
4
FLANGED ENDS (b) All sizes
Static Pressure Rating of Flange Selected
a) Process temperature limits are -40 and +150C (-40 and +300F). Transmitter temperature limitations must be observed
when integrally mounted to IFOA assembly. For higher pressures and temperatures, refer to Foxboro.
b) Available with associated piping only.
Page 31
IFOA
Specifications (continued)
Body Bolting:
ASTM A193 Grade B7 cadmium- or zinc-plated
with yellow chromate finish alloy steel stud bolts
and ASTM A194 Grade 2H nuts.
Orifice Plate Material:

316 ss ASTM A240, Monel ASTM B127, or
Hastelloy C276 ASTM B626, as specified.
Orifice Sealing Gasket Material:
Glass-reinforced ptfe.
Optional Features
Process wetted materials in compliance
with NACE Standard MR-01-75.
High pressure assembly (IFO). Static
pressure rating 40 MPa (6000 psi).
17-4 PH ss body bolting.
Oxygen service preparation.
3-valve manifolds.
180 U-Bend Integral Orifice Attachment.
Orifice Kits:

Consisting of 7 bored diameters per

standard specifications for 15 mm
(1/2 in) assembly.

316 ss


(1 in) assembly.

(1 1/2in) assembly.

Monel


(1/2 in) assembly.
How to Order
1) SPECIFY MODEL NUMBER: IFOA ___ __ __ __ __ __ ___
Nominal Size:
15 mm (1/2 in).......................................................................................... 0H
25 mm (1 in).............................................................................................. 01
40 mm (1 1/2 in)....................................................................................... 1H
Body Material:
316 ss ................................................................................................................... S
Hastelloy C, Grade CW-2M (without associated piping only)...................... H
End Connection without Associated Piping:
Socket Weld Body........................................................................................................1

Threaded Body (NPT)..................................................................................................2
Threaded Body (R metric)...........................................................................................8
End Connection with Associated Piping:

Pipe Ends Prepared for Welding....................................................................................... 3

Pipe Ends Threaded (NPT).................................................................................................. 4
Pipe Ends Threaded (R metric).......................................................................................... 9
Pipe Ends Flanged ANSI Class 150................................................................................... 5
Pipe Ends Flanged ANSI Class 300................................................................................... 6
Pipe Ends Flanged ANSI Class 600, 15 and 25 mm (1/2 and 1 in) only...................... 7
Orifice Plate Material:
316 ss .............................................................................................................................................S
Monel
............................................................................................................................................ M
Hastelloy C276............................................................................................................................. H
Page 32

IFOA

1) SPECIFY MODEL NUMBER (continued): IFOA ___ __ __ __ __ __ ___
Orifice Bore Diameter: Nominal Size 15 mm (1/2 in):

0.508 mm (0.020 in).............................................................................................................................. A

0.889 mm (0.035 in).............................................................................................................................. B
1.524 mm (0.060 in).............................................................................................................................. C
2.540 mm (0.100 in)..............................................................................................................................D
4.064 mm (0.160 in).............................................................................................................................. E
6.350 mm (0.250 in).............................................................................................................................. F
8.890 mm (0.350 in)..............................................................................................................................G
Jewel orifice. 316 ss base material. 0.0508 to 0.381 mm (0.002 to 0.015 in).............................. U
Nonstandard within beta limits of 0.1 to 0.8..................................................................................... V
Orifice Bore Diameter: Nominal Size 25 mm (1 in):

6.147 mm (0.242 in).............................................................................................................................. H

8.661 mm (0.341 in).............................................................................................................................. J
12.14 mm (0.478 in).............................................................................................................................. K
16.64 mm (0.655 in).............................................................................................................................. L
21.13 mm (0.832 in)..............................................................................................................................M
Orifice Bore Diameter: Nominal Size 40 mm (1 1/2 in):

9.703 mm (0.382 in)..............................................................................................................................N

13.67 mm (0.538 in).............................................................................................................................. P
19.08 mm (0.751 in).............................................................................................................................. R
25.86 mm (1.018 in).............................................................................................................................. S
29.97 mm (1.180 in).............................................................................................................................. T
Optional Connectors: For remote mounting d/p Cell Transmitter:

316ss, 1/2NPT................................................................................................................................................. 1S
316 ss, R1/2..................................................................................................................................................... 2S
Hastelloy C, 1/2 NPT...................................................................................................................................... 1H
Hastelloy C, R1/2............................................................................................................................................ 2H
2) SPECIFY ORIFICE BORE DIAMETER OR SUPPLY COMPLETED FLOW DATA SHEETS

(Refer to Foxboro) FOR NONSTANDARD OR JEWEL ORIFICE__________________________
3) SPECIFY OPTIONAL FEATURES______________________________________________________
Page 33

DIAPHRAGM PRESSURE SEALS
(Diaphragm Pressure Seals)
Diaphragm Pressure Seals
n
Foxboro
offers a comprehensive line of

Diaphragm Pressure Seals. These seals
are used to separate pressure
instruments from process fluids.
n
Separation

Diaphragm Pressure Seals are for
connection to pressure instruments
to isolate the process from the
instrument and piping.
is required if the process:

is corrosive
is viscous enough to clog
contains suspended solids
could freeze or solidify
is toxic
requires sanitary handling
n
Diaphragm
Pressure Seals are

available in a wide range of designs and
materials

Product Specification Sheet PSS 3-2C1 A.
Diaphragm Pressure Seals

Selection
Description

Process Connection:
PES-SB: 1/4,1/2, 3/4,1,1 1/4, or
1 1/2 NPT

THREAD PES-SG: 1/4,1/2,3/4, or 1 NPT
ATTACHED

Operating Pressure:
Maximum working pressure:
0 to 17.5 MPa (0 to 2500 psi).
Illustrations and AS References (a)
As Illustrated..........................AS Reference PES-SB

With 1/4-inch flushing
connection............................. AS Reference PES-SG

Process Connection:
ANSI raised face flange.

FLANGE
Operating Pressure:

ATTACHED Maximum working pressure:
Governed by flange rating.

As Illustrated......................... AS Reference PES-SC

With 1/4-inch flushing
connection............................. AS Reference PES-SD

Process Connection: Welded to process line.

IN-LINE

FLOW-
Operating Pressures:
THROUGH
Maximum working pressure: Governed by users weld,
0 to 10.5 MPa at 38 C (0 to 1500 psi at 100F).
80 mm (3 in) line only.100 mm (4 in) line & larger

As Illustrated.......................... AS Reference PES-SJ
As Illustrated.........................AS Reference PES-SM
a) Other types available. Wetted parts materials available: Steel, AISI Types 304 and 316 ss, Carpenter 20, Monel, nickel, ....
titanium, Hastelloy B and C, PVC,polypropylene, ptfe, and Inconel.
Page 34
(Thermowells and Dewcel)

THERMOWELLS AND DEWCEL
Thermowells
n
Rigid
material, concentricity specifications,

and individual hydrostatic testing assures
maximum soundness and highest quality
n
Connections:
Flanged (ANSI and ISO): Variety of sizes and

pressure ratings
Threaded (metric and NPT): R1/2, R3/4, and

R1 (1 /2, 3/4, and 1 NPT)
n
Type:
Drilled construction, welded construction, plain,

with lagging, sanitary, straight, tapered,
restricted tip
n
Materials:
Brass
Carpenter 20 Cb-3
C1018 Carbon Steel
R-Monel 405
304 ss (standard)
304 Low Carbon
(304L) ss
316 ss (standard)
347 ss
F11 Alloy Steel
F22 Alloy Steel
Hastelloy B
Hastelloy C 276
Inconel 600
Nickel 200
Titanium
316L ss
Aluminum
Copper
K-Monel
309 ss
310 ss
410 ss
446 ss
Foxboro Thermowells separate the

temperature measuring sensitive portion
of an RTD, Thermocouple, or Filled
Thermal System from a potentially
corrosive or damaging process media.
These wells permit ready removal of the
sensor without process shutdown.
Dew Point Measurement

System DEWCEL
n
The DEWCEL System provides a direct reading
of absolute humidity in ambient temperature

between -45 and +105C (-50 and +220F)
When connected to a temperature measurement device, the DEWCEL System measures

absolute humidity. By means of appropriate
tables, the temperature can be converted to
dew point, percent water vapor, parts per
million, or other units of absolute moisture.
In practice, the conversion is accomplished
in recorder chart layouts, characterized
amplifiers, or computer programs.
n
Accuracy:
0.8C (1.5F) at 32C (90F)

dew point (not including temperature sensor
tolerances)
n
Dew
Point Range Limits: -45 and +60C (-50

and +140F)
The DEWCEL is used with RTD, thermo

couple, or filled thermal system
temperature measuring equipment.
n
Relative
Humidity Limits: 12 and 100%

relative humidity
n
Pressure
Rating: Zero Pa absolute to 865 kPa

gauge (zero psia to 125 psig)
Page 35

Foxboro large case instruments have been on the job for years in process plants
around the world.
These versatile instruments fit a wide range of applications. Theres a unit for just
about every process function:
Recording
Indicating
Controlling
Totalizing
Transmitting
And they are available with a selection of measurement elements:
Flow
Pressure
Humidity
Temperature
Servo Elements for RTDs/Thermocouples and other Electrical Inputs
You can also choose from an extensive list of options such as electrical contacts,
integrators, batch controls, pen types, control modesand numerous other
features.
Foxboro large case instruments can be field mounted on pipe stands, in panels,
or on flush surfaces. And their durable housings are resistant to moisture,
corrosion, and damaging environments.
Their dependability is legendary. Thats why process engineers specify them time
and again.
Page 36

40P, 40M Series Recording
and Indicating Pneumatic
Controllers
n
Precise
n
Chart
40P, 40M
Control
Records or Indication
n
Weatherproof
NEMA Type 3
n
Wide
(Controllers)
Construction (40P):
Selection of Measuring Elements
n
Versatile
Mounting: Surface, Panel, or

Pipe Mounting

Product Specification Sheets PSS 3-1A1 A
and 3-1A2 A, B, C, and F.
The 40P, 40M Series Recording and Indicating

Pneumatic Controllers receive a mechanical
input from an integrally mounted measuring
element, compare it to a set point, and
produce a pneumatic output signal.
Control Modes:
See HOW TO ORDER.
Single Action:
One control unit per 40P or 40M case. Dual,
duplex, and auto-selector versions are also
available.
Measurement Elements:
See HOW TO ORDER.
Controller Action:
The output signal either increases or decreases
with increasing measurement, as specified.
Recorder Chart Drives:

Electrical: The standard speed is 1 revolution
per 24 hours for nominal 120 or 240 V, 50 or 60
Hz, as specified.
Mechanical: The standard speed is 1 revolution
per 24 hours with a 24-hour movement.
Output Signal:
See HOW TO ORDER.
Supply Pressure:
140 kPa (20 psi, 1.4 bar or kg/cm2).
Battery Operated: 11 Speed

Recorder Pens:
Fiber tip disposable or box.
Enclosure:
40P Series: The case and door are glass-fiber
reinforced polyester moldings, compounded
for superior corrosion resistance. The overall
construction provides the environmental
protection of IEC IP53 and NEMA Type 3.
40M Series:
Durable, die-cast aluminum case and door with
corrosion-resistant vinyl finish.
Mounting:
Standard mounting is flush in a panel up to 16
mm (0.6 in) thick or on a surface. A kit of parts
for vertical mounting on a DN 50 or 2 in pipe is
available (40P Series only).
Expendable Accessories:
Charts: 100 HUMITEX nominal 300 mm (12 in)
circular charts [nominal 100 mm (4 in) calibrated
scale] are supplied with each instrument.
Ink:
1 U.S. fl oz (30 cm3) is supplied for each box
type pen.
Page 37
(Controllers)
40P, 40M
Accuracy:
See Measurement Element selected.
Repeatability:
Optional Features
Pneumatic Set:
For remote set point adjustment.
Batch:
For batch control.
External Manual Set Point Knob.
Type 70 Contacts:
For electrical contact output. Refer to Page 57.
Ratio:
Maintains ratio between uncontrolled and
controlled variable.
External Connection to Integral Bellows.
How to Order
A
40P or 40M ___ - ___ ___ ___ - ___ ___ ___ ___ ___ / ____________
Function:
Recording............................................................R
Indicating............................................................ N
Action:
Single (One control unit actuated by one

measuring element. Control will apply to first
listed element.)......................................................... A
Control:
On/Off...................................................................................1
Full proportional 0.5 to 200%...........................................2
Full proportional plus derivative 0.01 to 50 minutes.....3
Full proportional plus integral (reset) 0.01 to
50 minutes per repeat...................................................4
Full proportional plus integral (reset) plus derivative....5
Narrow band proportional 0.5 to 25% or 1.0 to 50% ...6
Automatic/Manual Internal Transfer Switching:

Without internal regulator, without transfer switch (a)........... J

2-position nozzle seal switch (b)............................................... L
Balanceable automatic/manual unit - right (b)........................N
Balanceable automatic/manual unit - left (b).......................... P
Output Signal and Gauge:

20 to 100 kPa signal, 150 kPa gauge................................................5

3 to 15 psi signal, 22 psi gauge.........................................................2
0.2 to 1.0 bar signal, 1.5 bar gauge..................................................6
0.2 to 1.0 kg/cm2 signal, 1.5 kg/cm2 gauge.....................................4
Mounting:

Flush (c)..........................................................................................................F
Pipe (c), (d).....................................................................................................P
Surface (c).......................................................................................................S
Yoke. 40P Series available with Type 37 Element only...........................Y
(a) Available with Control code 1 only. (b) Not available with Control code 1. (c) Not available with 40P Series with Type 37 Element.
(d) Not available with 40M Series.
Page 38
(Controllers)
40P, 40M

A
40P or 40M ___ - ___ ___ ___ - ___ ___ ___ ___ ___ / ____________
Chart Drive or Scale:
Electrical - 24 h rotation, 120 V, 60 Hz (options available).............................. E
Mechanical - 24 h rotation and wind (options available)................................M
Sector
.....................................................................................................................N
Pens or Pointers:
1 pen or pointer............................................................................................................. 1
2 pens or pointers.......................................................................................................... 2
3 pens .............................................................................................................................. 3
Pen Type or Scale Type:
Fiber tip disposable................................................................................................................F

Box .......................................................................................................................................B
Single range scale...................................................................................................................S
Double range scale................................................................................................................ D
Elements: (Refer to Pages 48-56 for Element Descriptions)
Type 37 (a)..........................................................................................................................................DE-A, B
Absolute pressure bellows................................................................................................................PA-CA
Receiver................................................................................................................................................... PC
Absolute pressure double spiral...................................................................................................... PA-MA
Pressure helical.............................................................................................................................. PB-M, PB-AA
Pressure spiral..................................................................................................................................... PB-BA
Pressure bellows............................................................................................................................. PB-CA, CC
Diaphragm........................................................................................................................................PB-DF, PF
Stainless long helical.......................................................................................................................... PBGA
Temperature
.................................................................................................................................... TA-1A, 2A,
2B, 3B
Electronic servo....................................................................................................................................... E
(a) Only one per instrument.
2) SPECIFY MEASUREMENT RANGE___________________________________________________

3) SPECIFY CONTROLLER ACTION____________________________________________________
Page 39
(Controllers)
43AP Series Pneumatic

Indicating Controllers
43AP
n
Wide
Selection of Direct Connected

Measurement Elements
n
Broad
Choice of Control Modes

On/off, proportional, proportional plus
derivative, proportional plus integral (reset),
proportional plus integral (reset) plus deriva tive, differential gap, and automatic shutdown
n
Internal
Bumpless Auto/Manual Transfer

Smooth internal switching
n
Weatherproof
The 43AP Series Pneumatic Indicating

Controllers continuously indicate and
control pressure, vacuum, temperature,
or flow.
Glass-fiber reinforced case, gasketed door

NEMA Type 3 protection
n
Accuracy
Unaffected by Mounting
Measurement element and control unit
mounted on rigid steel plate
Product Specification Sheet PSS 3-1B3 A.
Controller Action:
Output signal either increases or decreases with
increasing measurement, as specified; action is
reversible in the field.
Control Modes:
See HOW TO ORDER.
See HOW TO ORDER.
Output Gauge:
0 to 200 kPa, 0 to 30 psi, or 0 to 2 bar or kg/
cm2, as specified.
Set Point Adjustment:
By means of a knob mounted inside the case.
Supply Pressure:
140 kPa, 20 psi, 1.4 bar or kg/cm2.
Output Signal:
See HOW TO ORDER.
-40 and +80C (-40 and +180F).
Accuracy (When used with the elements as
listed under HOW TO ORDER): 0.5% of
calibrated span.
Repeatability:
Mounting:
Panel, surface, pipe, or yoke. Panel: Flush in a
panel up to 16 mm (0.6 in) thick.
Surface: suitable for all controllers having
internally mounted elements. This mounting is not
available with heavy duty helical elements. (These
elements extend through the back of the case.)
Page 40
Pipe: a kit of parts to fit a DN 50 or 2 in vertical pipe.

Yoke: a kit of parts to fit a vertical DN 50 or 2 in
pipe stub. This mounting scheme is designed
specifically for controllers having rear-mounted
differential pressure elements.
(Controllers)
43AP
Physical Specifications (continued)

Enclosure:
The case and door are glass-fiber reinforced
polyester moldings, compounded for
superior corrosion resistance. The door
has a shatterproof polycarbonate window,
ultraviolet-resistant. The overall construction is
weatherproof, meets IEC IP53, and provides the
Scale:
Black markings on a white background, sectorshaped with nominal effective length of 150 mm
(6 in). Refer to Chart and Dial Catalog 600 for
available ranges.
Optional Features
Integral Air Supply Set.
Type 70 Contacts:
For electrical contact output. Refer to Page 57.
Batch:
For batch control.
Vent Connection.
Control Valve Mounting.
External Phenolic Nameplate.
External Connection to Integral (Reset) Bellows

(ECRB) .
Glass Window in Door.
External Set Point.
Stainless Steel Data Plate.

Tamperproof Door Knob.
How to Order
1) SPECIFY MODEL NUMBER: 43AP-
___ ___ ___ ___ - ___ / ______________
Mounting:
Field (pipe or yoke).............................................................................. F

Panel or surface.................................................................................... P
Control:
On/Off........................................................................................................... A1
Proportional 4 to 400%.............................................................................. A2
Proportional plus derivative 0.05 to 50 minutes..................................... A3
Proportional plus integral (reset) 0.01 to 50 minutes per repeat......... A4
Proportional plus integral (reset) plus derivative................................... A5
Differential gap 1 to 100%......................................................................... A7
Automatic shutdown................................................................................... A8

20 to 100 kPa signal, 200 kPa gauge................................................................. 5

3 to 15 psi signal, 30 psi gauge.......................................................................... 2
0.2 to 1.0 bar signal, 2 bar gauge...................................................................... 6
0.2 to 1.0 kg/cm signal, 2 kg/cm2 gauge......................................................... 4
None ............................................................................................................................. N
Bumpless with 2-position switch, balance gauge, regulator.................................. C
2-position nozzle seal switch for manual control...................................................... D
Optional Suffix:
Remote pneumatic set point (not available with pressure element codes
PA-CA, PA-CC, PB-CA, PB-GA, PB-PF; servo element code E;
Type 70 Contacts; or options ECRB and BATCH)..................................................... P
Page 41
(Controllers)
43AP

1) SPECIFY MODEL NUMBER: 43AP-
___ ___ ___ ___ - ___ / ______________
Type 37 (43AP-F only).......................................................................................................................DE-A, B

Absolute pressure bellows............................................................................................................ PA-CA, CC
Pressure helical.................................................................................................................................... PB-AA
Stainless long helical (43AP-F only)..................................................................................................PB-GA
Receiver................................................................................................................................................... PC
Temperature
.................................................................................................................................... TA-1A, 2A,
2B, 3B
2) SPECIFY CONTROLLER ACTION____________________________________________________

4) SPECIFY INFORMATION FOR INSTRUMENT TAG AND APPLICATION__________________
____________________________________________________________________________________
Page 42
(Recorders and Indicators)
40P, 40M Series Recorders

and Indicators
n
Wide
40P, 40M
Selection of Measuring Elements
n
Versatile
Mounting: Surface, Panel, or

Pipe Mounting
n
Choice
of Circular Chart Recorder

or either Concentric or Sector Scale
Indicator
n
Weatherproof
NEMA Type 3
Construction (40P Series):

Product Specification Sheets PSS 3-1A1 A
and 3-1A2 A, B, C, and E.
The 40P and 40M Series Instruments

continuously record or indicate measurement of one or more process variables.
See HOW TO ORDER.
Battery Operated: 11 speed.
Recorder Chart Drives:

Electrical: The standard speed is 1 revolution
per 24 hours for nominal 120 or 240 V, 50 or 60
Hz, as specified.

-30 and +60C (-20 and +140F).
Recorder Pens:
Fiber tip disposable or box.
Mechanical: The standard speed is 1 revolution

per 24 hours with a 24-hour movement.
See Measurement Element selected.
Enclosure:
40P Series: The case and door are glass-fiber
reinforced polyester moldings, compounded
for superior corrosion resistance. The door
has a shatterproof glass window. The overall
construction provides the environmental
protection of IEC IP53 and NEMA Type 3.
40M Series: Durable, die-cast aluminum case and
door with corrosion-resistant epoxy powder finish.
Mounting:
Standard mounting is flush in a panel up to 16
mm (0.6 in) thick or on a wall. A kit of parts for
vertical mounting on a DN 50 or 2 in pipe is
available as an option (40P Series only).
Cardboard Nameplate:
A cardboard nameplate is supplied for
displaying the chart factor.
Expendable Accessories:
Charts: 100 HUMITEX nominal 300 mm (12 in)
circular charts [nominal 100 mm (4 in) calibrated
scale] are supplied with each instrument.
Ink:
1 U.S. fl oz (30 cm3) is supplied for each box pen.
Indicator Pointer:
Sector indicators have an orange pointer and
concentric indicators have a black pointer.
Indicator Scales:
Black markings on white background. Refer to
Chart and Dial Catalog 600 for available ranges.
Sector:
The effective length is 171 mm (6.75 in).
Concentric:
The effective length is 594 mm (23.4 in).
Page 43
40P, 40M
Optional Features
Incandescent Type Internal Illumination.
Indicating Scale Transparent Mounted in

Instrument Door.
Bakelite Nameplate.
Plexiglass Circular Disc.
Flush Door Lock.
Portable Mounting.
Segmental Indicating Scale.
How to Order
1) SPECIFY MODEL NUMBER: 40P or 40M-
___ - ___ ___ ___ ___ ___ / ______________
Function:
Circular Chart Recorder..............................................................R

Sector Scale Indicator................................................................. N
Concentric Scale Indicator......................................................... K
Internal Mechanism:

Recorder - standard............................................................................. R
Indicator- sector...................................................................................N
Indicator - concentric........................................................................... K
With Type 70 Contacts (recorder or indicator)................................ E
Mounting:

Flush (a)..........................................................................................................F
Pipe (a), (b).....................................................................................................P
Surface (a).......................................................................................................S
Yoke. 40P Series available with Type 37 Element only...........................Y
Chart Drive or Scale:

Electrical, 24 h rotation, 120 V, 60 Hz (options available)............................... E

Mechanical, 24 h rotation and wind (options available)................................. M
Sector scale............................................................................................................N
Concentric scale.................................................................................................... K
Battery operated (11 speed)..............................................................................XX
Pens or Pointers:

1 pen (R) or 1 pointer (N or K)..................................................................................... 1

2 pens (R) or 2 pointers (N).......................................................................................... 2
3 pens (R)....................................................................................................................... 3
4 pens (R)....................................................................................................................... 4
Pen Type or Scale Type:
Fiber tip disposable............................................................................................................... F

Box ...................................................................................................................................... B
Single range scale.................................................................................................................. S
Dual range scale. For 40PN and 40MN Series only.......................................................... D
(a) Not available with 40P Series with Type 37 Element. (b) Not available with 40M Series.
Page 44

40P, 40M

1) SPECIFY MODEL NUMBER: 40P or 40M-
___ ___ ___ ___ ___ - ___ / ______________
Type 37 (yoke mounting only) (a)....................................................................................................DE-A, B

Absolute pressure bellows................................................................................................................PA-CA
Receiver................................................................................................................................................... PC
Pressure helical.............................................................................................................................. PB-M, PB-AA
Stainless long helical..........................................................................................................................PB-GA
Temperature
.................................................................................................................................... TA-1A, 2A,
2B, 3B
Relative humidity (b)............................................................................................................................MA-K
(a) Only one per instrument.
(b) Not available with 40P Series.

Page 45
(Recorders and Controllers)
Oil & Gas Industry Flow

Recorders and Controllers
43APG
n
43APG
Series Controllers:
NACE compliant element materials available.

Low air consumption and internal corrosion
resistance means the 43APG can be
operated directly from the process gas
Wide choice of measurement elements
n
Glass-fiber
43APG Series Controllers provide precise

indication and control of flow, pressure,
vacuum, and temperature.
reinforced case with gasketed

door provides NEMA Type 3 protection.

Specification Sheets PSS 7-3C3 A and B.
Measurement Elements and Configurations:
See HOW TO ORDER.
Controller Output Signal and Supply Pressure:

Output Signal
Supply Pressure
20 to 100 kPa (a)

3 to 15 psi
0.2 to 1.0 bar or kg/cm2 (a)
140 kPa (a)

20 psi
1.4 bar or kg/cm2 (a)
(a) Not applicable to the 43APG Series Controllers.
WARNING:
EXPLOSION HAZARD CAN RESULT FROM USE
OF NATURAL GAS AS SUPPLY. INSTRUMENT
LOCATION MUST BE PROPERLY CLASSIFIED PER
NFPA-70. TOXICITY HAZARD CAN RESULT FROM
USE OF SUPPLY GAS CONTAINING HYDROGEN
SULFIDE (H2S). AREA MUST BE VENTILATED OR
BREATHING APPARATUS USED. REFER TO Ml
011-111.
Recorder Accuracy:
Spans less than 12:5 kPa, 50 inH20, 125 mbar P
and all compound ranges: 0.50% of span.
Repeatability: Less than 0.2% of span.
Controller (less element) Accuracy:
Hysteresis: 1 % of output span.
Dead Band: Less than 0.1 % of span.
Door:
Hinged, glass-fiber reinforced phenylene oxide
molding with blue polyurethane finish. The clear
polycarbonate window is ultraviolet-resistant
and shatterproof.
Case:
Glass-fiber reinforced, gray polyester molding.
Optional Features
Refer to Foxboro. (What? Vague reference.)
Page 46
(Recorders and Controllers)

43APG
How to Order
1) SPECIFY MODEL NUMBER: 43APG- ___ ___ ___

2 ___ - ___ / ______________
Mounting:
Field .................................................................................................... F
Panel or Surface................................................................................... P
Control:
On-Off........................................................................................................... A1
Proportional 4 to 400%.............................................................................. A2
Proportional plus Derivative 0.05 to 50 minutes.................................... A3
Proportional plus Reset (Integral) 0.01 to 50 minutes per repeat........ A4
Proportional plus Integral plus Derivative............................................... A5
Differential Gap 1 to 100%........................................................................ A7
3 to 15 psi signal, 30 psi gauge.......................................................................... 2
Bumpless with 2-position switch, balance gauge, regulator.................................. C

2-position nozzle seal switch for manual control...................................................... D
None ............................................................................................................................. N
Optional Suffix:
Remote Pneumatic Set Point (not available with element code

PA-CA, PA-CC, PB-PF, or PB-GA).................................................................................... P
Element: (Select one, refer to Pages 48-56 for Element Descriptions)
Type 37 (43APG-F only)................................................................................................................. DE-A (a), B

Absolute pressure bellows............................................................................................................ PA-CA, CC
Receiver............................................................................................................................................... PC-OC
Pressure helical.............................................................................................................................. PB-AA, AM (b)
Pressure spiral............................................................................................................................... PB-BA, BM (b)
Stainless long helical (43APG-F only)...............................................................................................PB-GA
Temperature (c)............................................................................................................................... TA-1A, 2A,
2B, 3B
(a) Available in NACE compliant version.
(b) Element codes PB-AM and PB-BM comply with NACE Standard MR-01-75.
(c) Available with AISI Type 316 stainless steel tubing only.
2) SPECIFY SCALE FROM CHART AND DIAL CATALOG 600 OR REFER TO

FOXBORO________________________________________________________________________
3) SPECIFY CALIBRATED RANGE______________________________________________________
4) SPECIFY CONTROL ACTION (FIELD REVERSIBLE)____________________________________
Page 47
(Elements)
Type 37 Diaphragm
Differential Pressure Element
TYPE 37
n
I
deal
for Liquid, Gas, and Steam Flow

Measurement
n
N
o
Mercury Used: Safe Operation
n
A
mbient
Temperature Compensation
n

Overrange
n
R
equires
Protection
No Power for Operation

Product Specification Sheet PSS 3-4A2 A.
Type 37 Diaphragm Differential Pressure
Elements translate differential pressure to
angular shaft position.
Spans:
Available between 5 and 50 kPa or 20 and 200
inH20.
Standard Differential Pressure Ranges:
0 to 5, 0 to 12.5, 0 to 25, and 0 to 50 kPa; or 0 to
20, 0 to 50, 0 to 100, and 0 to 200 inH20 P.
Page 48
Maximum Process Pressure:

14 MPa (2000 psi).
-34 and +110C (-30 and +230F).

Pressure Measuring
Elements
(Elements)
PRESSURE MEASURING ELEMENTS
n
W
ide
variety of element types,

materials, and pressure ranges
n
D
urable
and dependable for long

service life

Pressure Measuring Elements measure gauge

and absolute pressure and actuate recorders,
indicators, controllers, and transmitters.
Accuracy:
Better than 0.5%.
Element Materials:
AISI Type 316 ss (316 ss).
Copper-Nickel-Manganese (Cu-Ni-Mn) Alloy.

K-Monel.
Bronze or Brass.
Optional Features
Overrange Protection, Underrange Protection:
Provides protection to the linkage and pointer,
not the pressure element.

Available for 316 ss spirals and 316 ss helicals.
Copper bearing brazing material will be in
contact with process.
Page 49
(Elements)
PRESSURE MEASURING ELEMENTS
How to Order
1) SPECIFY ELEMENT CODE:
___________
Normal Recorder Measurement Ranges

Element (Torque Factor rating 30)

Type Material
kPa
psi,psia
80 kPa
100 kPa

12 psi
15 psi
24 psi
............................... PC (a)

Diaphragrn
Cu-Ni-Sn Pfinodal
75 mm (3 in)
2 and 10 kPa
2 and 6 kPa vac
0.3 and 1.5 psi

0.3 and 0.9 Psi vac
............................... PB-PF

Diaphragm
Cu-Ni-Sn Pfinodal
50 mm (2 in)
6 and 70 kPa
6 and 35 kPa vac
0.9 and 10 psi

0.9 and 5 Psi vac
............................... PB-DF
35 and 200 kPa
4.5 and 29 Psi
............................... PB-CA
Bellows
30 and 180 kPa

34 and 100 kPa vac
4 and 26 psi
4.9 and 15 psi vac
...............................PB-CC
82 and 1400 kPa

82 and 100 kPa vac
12 and 200 psi

12 and 15 psi vac
............................... PB-BA
Receiver (Bellows)
Brass
316 ss

Brass

316 ss
Spiral
K-Monel
140 and 1400 kPa
20 and 200 psi
316 ss
K-Monel
1400 and 40 000 kPa

1700 and 14 000 kPa
200 and 6000 psi

250 and 2000 psi

Helical

316 ss
500 and 200 000 kPa
75 and 30 000 psi
Heavy Duty Helical

Absolute Bellows

316 ss
Bronze
17 and 240 kPa abs

13 and 270 kPa abs
2.5 and 35 psia

1.9 and 39 psia
Absolute Double Spiral
316 ss
140 and 700 kPa abs
20 and 100 psia
...............................PB-BM
............................... PB-AA
...............................PB-AM
...............................PB-GA
...............................PA-CA
...............................PA-CC
.............................. PA-MA
(a) Code PC-OC when used with the 43APG Series Controller on Page 46.
2) SPECIFY MEASUREMENT RANGE___________________________________________________

Page 50

Filled Thermal System
Elements
(Elements)
THERMAL ELEMENTS
n
D
ependable
Field-proven performance
n
N
onelectric
Continuous operation, even with power

failure
n
S
afe
Suitable for Class I, Division 1 hazardous

locations

Filled Thermal System Elements consist of sensor,
connection tubing, and mechanical element.
Thermal System Types:
Class IA:
A thermal system that is completely filled with an
incompressible liquid under pressure. The system
is fully compensated for ambient temperature
variations at case and along the tubing.
Class IIA:
A thermal system that is evacuated and partially
filled with a volatile liquid, such as methyl chloride
(CL), ether (ET), butane (BU), or toluene (T).
Class IIIB:
A gas system that is filled under pressure with
purified nitrogen.
Standard Ranges, Standard Spans and Range Limits:

CLASS IA

Range Limits
Standard
X Length

Spans
Minimum Maximum

C
mm in
C C
CLASS IIA
CLASS IIIB
Standard Standard Range Limits
Ranges (Fills)
Spans
Minimum Maximum
C

25
122
4.8
13
120
38 to 105 (BU)

50
69
2.7
-15
200
105 to 150 (ET)

75
53
2.1
-38
200
50 to 205 (T)

100
43
1.7
-63
200
38 to 150 (ET)

150
36
1.4
-73
250
50 to 250 (T)

200 30 1.2 -73 260

250 28 1.1 -73 260
F
mm in
F F
F

50
112
4.4
50
250
100 to 180 (CL)

100
69
2.7
0
400
100 to 220 (BU)

150
51
2.0
-50
400
100 to 250 (BU)

200
43
1.7
-100
400
100 to 270 (BU)

250
36
1.4
-100
400
100 to 300 (ET)

300
33
1.3
-100
500
100 to 350 (ET)

400
28
1.1
-100
500
100 to 400 (T)

500
25
1.0
-100
500
200 to 500 (T)

C C
100
-40
170
150
-15
400
200
-15
500
250
-15
500
300
-15
500
400 -15 500
500 -15 500
F
F F
150
-50
240
200
-50
425
300
0
825
400
0
1000
500
0
1000
600
0
1000
700
0
1000
800
0
1000
1000
0
1000
Page 51
(Elements)
THERMAL ELEMENTS
Accuracy:
Class IA:
0.5% of calibrated span for spans up to 215C
(400F).
0.75% of calibrated span for spans between
215 and 330C (400 and 600F).
Class IIA:
0.5% of calibrated span over upper 2/3 of scale.
Class IIIB:
0.5% of calibrated span for spans up to 330C
(600F).
0.75% of upper range value for upper range
value above 330C (600F).
0.75% of lower range value for lower range
value below45C (-50F).
Sensor Type:
Adjustable union, bendable extension.
Sensor Dimensions:
X = Sensitive portion length.
U = Insertion length.
J = Extension length.
B = Bushing thread type and size.
Y = Sensor diameter.
J = 450mm(18in).
X = 100 mm (4 in) for Class IIA and 150 mm (6 in)
for Class IIIB systems. For Class IA systems, X
is governed by sensor diameter and measurement span. See table under FUNCTIONAL
SPECIFICATIONS on previous page.
U = (minimum) = X + 50 mm (2 in).
U = (maximum) = X + 380 mm (15 in).
B=1
/2, 3/4, or 1 NPT external threads as
specified for Class IA or IIA systems and 1
NPT external threads for Class IIIB systems.
Connecting Tubing:
1.5, 4.5, or 7.5 m (5, 15, or 25 ft) flexible
stainless steel over stainless capillary.
Y = 9.53 mm (3/8 in) for Class IA and IIA,

22.26 mm (7/8 in) for Class IIIB.
Optional Features
Alternative Thermal Systems:
a) Longer capillary lenghts and types.
b) Other ranges and spans.
c) Sanitary fittings.
d) IIB system.
Page 52
Thermowells:
Refer to Page 35.
Mounting Flanges.
Special Purpose Sensors:
Preformed capillary, coated type, etc.
(Elements)
THERMAL ELEMENTS
How to Order
1) SPECIFY BASE INSTRUMENT BY MODEL NUMBER (Recorder, Indicator,
Controller, Transmitter)___________________________________________________________
2) SPECIFY CLASS/TUBING/SENSOR CODES
IA Liquid Filled: TA-1A/D-FS-SS/4542-J18______________________________________
IIA Vapor Filled: TA-2A/S-FS-SS/2542-J18______________________________________
IIIB Gas Filled: TA-3B/S-FS-SS/3542-J18________________________________________
3) SPECIFY CALIBRATED RANGE (must meet requirements of table under
Functional Specifications on Page 51)_____________________________________________
4) SPECIFY NORMAL WORKING TEMPERATURE______________________________________
5) SPECIFY AMBIENT TEMPERATURE AT CASE AND ALONG TUBING__________________
6) SPECIFY SENSOR DISTANCE ABOVE OR BELOW CASE (Class IIA systems only)_______
7) SPECIFY ANTICIPATED U DIMENSION (insertion length)___________________________
8) SPECIFY BUSHING THREAD SIZE B DIMENSION; SPECIFY 1/2, 3/4, OR
1 NPT FOR IA OR IIA SYSTEMS, 1 NPT FOR IIIB SYSTEMS___________________________
9) SPECIFY OPTIONAL FEATURES___________________________________________________
10) SPECIFY INFORMATION FOR INSTRUMENT TAG___________________________________
Page 53
(Elements)
SERVO ELEMENTS
Electronic Servo Elements

n
Sealed
Conductive Plastic Slidewire
Does not need frequent cleaning

Fast response and long life
n
RFI
Protected Electronics
Module may be field-mounted

n
dc
Electronic Servo Elements are used with 40P

and 40M Series Recorders, Indicators, and
Controllers; 43AP and 43EP Series Indicating
Controllers; and 45P Series Transmitters.
Torque Motor
No brushes or gears
For complete specifications, refer to Technical
Information Sheet Tl 27-1a.
Standard Ranges:
Range
Sensor Codes Available
Code
Range
mV mA
C
F

39
0 to 600
K T J
Q

40
Measurement Range Code Table (see HOW

TO ORDER for description of sensor codes):
Range
Sensor Codes Available
Code
Range
mV mA
C
01
0 to 5
M
02
0 to 10
M
03
0 to 20
M

04
0 to 30
Q
05
0 to 50
M Q

06
-50 to -50
Q
J
07
-100 to +50
08
0 to 75
M Q
J
09
-20 to +80

10
0 to 100
M J Q
Q
Q

11
-100 to 0
Q

12
-200 to +100
J E J E
E
13
-100 to +100

14
50 to 100
Q

15
-20 to +120
Q

16
17
-25 to +125
T
J Q
18
0 to 150
Q

19
-50 to -150
J E

20
50 to 150
Q

21
4 to 20
A
22
10 to 50
A

23
0 to 200
T J K Q J
E
24
-100 to +200
J E

25
100 to 200
Q

26
0 to 250
T J Q T E
T J
27
-50 to +250

28
50 to 250
Q J
J K
29
0 to 300
Q
T J

30
-350 to +300
T E
Q
Q
Q
Q
Q

J Q
31
100 to 300
J Q
J K
32
0 to 40
Q
T J K
Q

33
100 to 40
K
Q
J Q
34
200 to 400
Q
J K
35
0 to 500
Q
T J K
Q

36
-150 to +500
T E

37
200 to 500
K
Q
J
38
300 to 500
Page 54

41
200 to 600
J
J
42
300 to 600
T
J
43
0 to 700
Q
J
44
200 to 700
J

45
0 to 750
J K K
R J
46
0 to 800
Q

47
100 to 800
J K
K J K
48
300 to 800

49
0 to 900
J
Q
K J
50
500 to 900

K S J
51
700 to 900
K S J K
52
0 to 1000

53
500 to 1000
J K

54
0 to 1200
J K

55
200 to 1200
J K

56
400 to 1200
J K
R
57
0 to 1300

58
R
59
800 to 1400

60
900 to 1400
S

R J
61
0 to 1500

62
500 to 1500
J K
K
63
0 to 1600

64
1100 to 1600
S J
K
65
1200 to 1600
R
66
500 to 1700
K

67
0 to 1800
J K
K
68
0 to 2000

69
1000 to 2000
J R

70
1200 to 2000
R

K
71
0 to 2400
K
72
1200 to 2400
K
73
0 to 2500
K
74
1000 to 2500
K
75
1500 to 2500
R
S

76
1700 to 2500
S
Input Impedance (mA inputs):

4 to 20 mA (Range Code 21)-6.25 ohms.
10 to 50 mA (Range Code 22)-2.5 ohms.
Power Required:
See HOW TO ORDER.
(Elements)
SERVO ELEMENTS
Accuracy:
Repeatability:
Optional Features
Loop Power Supply:
30 V dc.
Replacement Range Card:

Specify measurement type, measuring range code,
range units, and thermocouple burnout (if required).
dc Voltage Inputs:
0.055 to 42 V dc.
Power Failure Detection:

Positions pen either to 100% of range or to zero
when ac power fails.
Nonstandard Ranges:

Item
Millivolts, Thermocouples
Resistance Temperature Detectors (RTDs)
Range
Range Limits
Limits
lower
-15 mV
18 ohms
Span Limits
Range
Limits
upper
100 mV
330 ohms
minimum maximum
5 mV
8 ohms
100 mV
300 ohms
Page 55
(Elements)
SERVO ELEMENTS
How to Order
1) SPECIFY BASE INSTRUMENT BY MODEL NUMBER:
2) SPECIFY SERVO ELEMENT: E
______________
___ ___ ___ ___ ___
Power Supply:
120Vac............................................................................................................................. S
220 V ac...........................................................................................................................N
240 V ac........................................................................................................................... P
MeasurementSensor Type:

EC/ISA T (Cu-CuNi) Thermocouple......................................................................................T

DIN 43710-77 (Cu-CuNi) Thermocouple............................................................................ C
EC/ISA J (Fe-CuNi) Thermocouple.......................................................................................J
DIN 43710-77 (Fe-CuNi) Thermocouple............................................................................ D
EC/ISA E (NiCr-CuNi) Thermocouple...................................................................................E
EC/ISA K (NiCr-NiAI) Thermocouple (DIN 43710-77)....................................................... K
EC/ISA R (Pt13Rh-Pt) Thermocouple....................................................................................R
EC/ISA S (Pt10Rh-Pt) Thermocouple (DIN 43710-77)........................................................S
EC/ISA B (Pt30Rh-Pt6Rh) Thermocouple............................................................................ B
dc mV ...................................................................................................................................... M
dc mA ...................................................................................................................................... A
Platinum RTD, 100-ohm DIN Resistance............................................................................. Q
Nonstandard (including Temperature Difference)............................................................ X
Measurement Range:
Select 2-digit number from Measurement Range Code Table on Page 54.......................... __
Range Units:
Degrees Celsius...................................................................................................................................... C
Degrees Fahrenheit.................................................................................................................................F
Millivolts.................................................................................................................................................... M
Milliamperes............................................................................................................................................ A
Burnout Feature (thermocouples only):
Upscale action (not available with RTD)........................................................................................................ U

Downscale action (not available with RTD).................................................................................................. D
None ................................................................................................................................................................ N
Upscale actionReverse Range (not available with RTD)........................................................................... R
Downscale actionReverse Range (not available with RTD)...................................................................... S
NoneReverse Range...................................................................................................................................... T

4) SPECIFY SENSOR (e.g., THERMOCOUPLE OR RTD) TO BE ORDERED
SEPARATELY______________________________________________________________________
Page 56

Type 70 Electronic Contacts
(Miscellaneous)
70, MR
n
U
sed in 40P and 40M Series Recorders,
Indicators, and Controllers and 43AP

Series Indicating Controllers
Rotor Units:
Single or double rotor units are available, each
having 3 or 5 contact segments. One segment
serves as the common or collector ring
contact resulting in 2, 4, or 6 segments being
available for relay actuation. Contact segments
are adjustable with relation to each other by
micrometer adjustment screws. This relationship
is not disturbed by the contact setting
mechanism.
Contact Setting Mechanism:
Each rotor unit is independently positioned to
operate at desired values of measurement. A
wide selection of setting mechanisms is available.
A Type 70 Electric Contact System is used to

actuate external control or alarm circuits.
MR Series Receiver Gauges

MR Series Receiver Gauges accept 3 to 15
psi inputs from remotely located pneumatic
transmitters. A wide variety of dials and scales
is available to indicate measurements in
convenient engineering units.
Page 57

CONSOTROL 100 is a complete family of pneumatic controllers, recorders,
indicators, and auxiliary devices.
These instruments can handle the special requirements of virtually any application
from simple single control loops to interrelated multivariable systems.
Each CONSOTROL 100 unit is perfectly matched with other foxboro pneumatic
instruments including transmitters, valves, and accessories.
And they are engineered to fit into control configurations of all sizes. Together,
they deliver exceptionally high system performance.
CONSOTROL 100 Instruments give you:
Bold, Readable Displays

Continuous scale indication of process variables and deviation from set point.
Separate Automatic and Manual Functions

Avoids forced shutdowns control can be maintained in either mode.
Accurate Force Balance Control Modules

Metallic bellows, flexure-suspended balance member for precise opeation.
Balanceless, Bumpless Auto/Manual Transfer

Fast, safe selection of operating mode.
Simple, Low Cost Mounting

helves accomodate up to ten instruments. Integral air manifold reduces piping
S
costs. Individual air shutoff valve for each instrument.
Easy Service
Pneumatic circuit board has simple piping and connections. Components are
highly accessible all behind one sliding cover.
Page 58
(Indicating Controllers)
130M, 130P, 130F Series

Pneumatic CONSOTROL
Indicating Controllers
n
130Mmanual
130M, 130P, 130F
set point adjustment
n
130Pset
point pneumatically adjusted

by a remote signal
n
130Fremote/local
switch for manual

or pneumatic adjustment of set point

Product Specification Sheet PSS 2B-4H 1 A.
130M
130P
130F
130M, 130P, and 130F Series Pneumatic

CONSOTROL Indicating Controllers compare
a remote transmitter signal with a set point and
produce a control signal to a final actuator.
Supply Pressure:
140 to 150 kPa or 20 to 22 psi.

-20 and +65C (0 and 150F) .
Input/Output Signal:
20 to 100 kPa or 3 to 15 psi, as specified.
Control Action Reversal:

The control action is reversed by a 90 degree
rotation of the reversing switch.
Mode Adjustment Limits:

Proportional Band: 5 and 500%.
Auto/Manual Transfer Unit:

A 2-position switch lever located on the front
of the manual unit is used to switch directly
from automatic to manual or, on controllers
with integral, from manual to automatic without
bumping the process.
Integral Action:
0.01 and 50 minutes per repeat.
Derivative Action:
0.01 and 50 minutes.
Accuracy:
Measurement and Set Point Indicators: 0.5% of
calibrated span.
Alignment Error:
Automatic Control Unit: Less than 0.5% of
calibrated span.
Output Indicator:2% of calibrated span.
Dead Band:
Automatic Control Unit: Less than 0.1 % of cali
brated span.
Repeatability:
Measurement and Set Point Indicators: Better
than 0.25% of calibrated span.
Measurement and Set Point Indicators: Less than

Mounting:
These controllers are designed for flush
mounting in vertical panels 3 to 25 mm (0.13
to 1 in) thick using 102 or 101 Series Shelves.
Each controller requires 1 unit of shelf capacity.
They may be calibrated for mounting in a panel
inclined up to 75 degrees from vertical with the
rear of the instrument lower than the front.
Connections:
Separate electric and pneumatic connectors are
located on the rear of the chassis in accordance with
the standard arrangement for 102 Series Shelves.
Nameplate:
White translucent plastic with 2.5 mm (0.1 in)
high black letters. There can be a maximum of 2
lines with 17 characters or spaces per line.
Page 59
130M, 130P, 130F

Pointers:
Measurement: Red.
Manual Set (130M Series) and Remote Set (130P
and 130F Series):Black on white.
Local Set (130F Series): Black.
Output: Red.
Scales:
Vertical Scale: Removable, transparent plastic with
black markings; 100 divisions, scaled as specified.
Output: Black markings on a white background;
20 divisions from 0 to 100% output signal. The red
pointer continuously indicates automatic or manual
output. Refer to Chart and Dial Catalog 600.
Optional Features
Batch Controller:
Prevents integral circuit saturation during
shutdown or other periods of sustained set
point and measurement deviation. Includes
internal adjustment for preload.
Reference BSL.
High Batch Unit:

Operates when controller output pressure
exceeds 100 kPa or 15 psi. Specify by
substituting 130MB, 130PB, or 130FB in place or
130M,130P, or 130F in Model Number.
External Set Point Connection:

Not available for 130F Series with External
Connection to Integral Bellows option. Provides
access to set point signal. Maximum transmission
distance is 1.5 m (5 ft) and all external connections
must be leaktight due to low air delivery of
aspirating relay. Use 1:1 repeating relay for
greater transmission distances.
Low Batch Unit:

Operates when controller output pressure falls
below 20 kPa or 3 psi. Specify by substituting
130MB, 130PB, or 130FB in place of 130M,
130P, or 130F in Model Number plus AS
External Connection to Integral Bellows:

Permits connection of external feedback signal to
prevent integral circuit saturation.
Alarm Actuators and Alarm Lamps:

Refer to Page 72.
How to Order
________ __
Controller:
with Manually Positioned Set Point............................................................................................130M-N

with Pneumatically Positioned Set Point.................................................................................... 130P-N
with Remote/Local Set.................................................................................................................. 130F-N
Control Function:
On/off
................................................................................................................................................................ 1
Proportional...................................................................................................................................................... 2
Proportional plus derivative........................................................................................................................... 3
Proportional plus integral............................................................................................................................... 4
Proportional plus integral plus derivative..................................................................................................... 5
2) SPECIFY INPUT/OUTPUT SIGNAL___________________________________________________

3) SPECIFY SET POINT AND MEASUREMENT SCALE RANGEREFER TO CHART AND DIAL
CATALOG 600____________________________________________________________________
4) SPECIFY MOUNTING EQUIPMENT102 OR 101 SERIES SHELVES_____________________
6) SPECIFY INFORMATION FOR NAMEPLATE AND INSTRUMENT TAG___________________
Page 60

130 Series Pneumatic
CONSOTROL Auto
Selector Control System
130 AUTO-SELECTOR
n
One
Final Actuator
To prevent any of several process measure-
ments from exceeding their set points
n
Continuous
Measurement
Variables are measured and control is
transferred to the one that is tending to
exceed its limit
n
Auto/Manual
Switch
Smooth transfer by means of a single
2-position switch
Balanceless, bumpless
n
A
Complete System Consists of:

One 130MS (local set) or 130FS (local/
remote set) controller with manual transfer unit
One or more 130MA (local set) or 130FA (local
/remote set) controllers without manual units
Rack-mounted high or low selector relays
A rack-mounted seal valve
The 130 Series Pneumatic CONSOTROL AutoSelector Control System controls two or more
related variables within preset limits.

General Specification Sheet GS 2B-4H 1 D.
Supply Pressure:
140 to 150 kPa or 20 to 22 psi.

-20 and +65C (0 and 150F) .
Input/Output Signal:
Control Action Reversal:

The control action is reversed by a 90 degree
rotation of the reversing switch.
Mode Adjustment Limits:

Proportional Band: 5 and 500%.
Auto/Manual Transfer Unit:

A 2-position switch lever located on the front
of the manual unit is used to switch directly
from automatic to manual and from manual to
automatic without bumping the process.
Integral Action:
0.01 and 50 minutes per repeat.
Derivative Action:
0.01 and 50 minutes.
Accuracy:
Measurement and Set Point Indicators: 0.5% of
calibrated span.
Dead Band:
calibrated span.
Output Indicator: 2% of calibrated span.
Measurement and Set Point Indicators: Less than

Repeatability:
Measurement and Set Point Indicators: Better
than 0.25% of calibrated span.
Alignment Error:
calibrated span.
Mounting:
These controllers are designed for flush
mounting in vertical panels 3 to 25 mm (0.13
to 1 in) thick using 102 or 101 Series Shelves.
Each controller requires 1 unit of shelf capacity.

They may be calibrated for mounting in a panel,
inclined up to 75 degrees from vertical, with the
rear of the instrument lower than the front.
Page 61
130 AUTO-SELECTOR

Connections:
located on the rear of the chassis in accordance
with the standard arrangement for 101, 102
Series Shelves..
Output:
Black markings on a white background; 20 divisions
from 0 to 100% output signal. The red pointer
continuously indicates automatic or manual output.
Refer to Chart and Dial Catalog 600.
Nameplate:
high black letters. There can be a maximum of 2
lines with 17 characters or spaces per line.
Nominal Dimensions (including manual unit):

205 mm high x 70 mm wide x 555 mm deep (8.2
in high x 2.8 in wide x 21.8 in deep).
Output: Red.
Selector Relays and Volume Booster:

A low selector relay is required for each
controller in a LOW Auto-Selector System. A
HIGH selector system requires one less high
selector relay than the number of controllers
and one low selector relay used as a volume
booster in the system output. Specify High
Selector, Part No. B0114YL or Low Selector, Part
No. B0114BZ.
Scales:
Vertical Scale: Removable, transparent plastic
with black markings; 100 divisions, scaled as
specified.
Seal Valve:
One pneumatically actuated seal valve is
required per Auto-Selector System. Specify Part
No. C0138RM.
Pointers:
Measurement: Red.
Manual Set (130M Series) and Remote Set (130F
Series): Black on white.
Local Set (130F Series): Black.
Optional Features
Batch Controller:
High Batch feature available only for
controllers used in LOW Auto-Selector
Systems. Add Suffix -B to Model Number.

Refer to Page 72.
How to Order
________ __ ___
Controller:
with Manually Positioned Set Point.................................................................................... 130M

with Remote/Local Set Point.................................................................................................130F
Auto-Selector:
without Manual Transfer Unit.............................................................................................................. A

with Manual Transfer Unit.................................................................................................................... S
Control Function:
Proportional plus integral.............................................................................................................................N4

Proportional plus integral plus derivative...................................................................................................N5
2) SPECIFY INPUT/OUTPUT SIGNAL___________________________________________________

3) SPECIFY SET POINT AND MEASUREMENT SCALEREFER TO CHART AND DIAL
CATALOG 600____________________________________________________________________
4) SPECIFY SELECTOR RELAYS AND SEAL VALVE______________________________________
Page 62
(Recorders & Controllers)
127S Series Pneumatic

CONSOTROL Recorders
127S
n
Bold,
Readable Displays
Bright red, green, and blue ribbon
indicators
Individual scales
n
Simple
Maintenance
Accessible modular components
Adjustments can be made while
instrument is in operation
n
Easy
Chart Changing and Pen

Replacement
Removable chart drive
Snap-in, fiber-tip pen cartridges
n
Precise
Servo Mechanism
Accurately positions pens
All-pneumatic
Guided by force balance detector
The 127S Series Pneumatic CONSOTROL

Recorders record up to 3 process
measurements received from remote
transmitters.

Product Specification Sheet PSS 2B-3E2 B.
Pneumatic Input Signal:
3 to 15 psi (20 to 100 kPa) (0.20 to 1.0 Kg/cm2)
or 3 to 18 psi (20 to 120 kPa) (0.2 to 1.2 Kg/cm).
Supply Pressure:
120 to 150 kPa or 18 to 22 psi.
Power Requirements:
24 4 V ac, 120 or 240 V ac, +10, -15%, 50 or
60 Hz, as specified. Required with electric chart
drive only.
Fusing:
Required with electric chart drive only. For 24 V
ac: No fuse required.
For 120 V ac: 3/8 A.
For 240 V ac: 1/4 A.
5 and 50C (40 and 120F) .
Pen Speed:
The elapsed time for the pen to travel from 10
to 90% of full scale is adjustable from less than 3
to greater than 20 seconds.
Mounting Position:
Normal mounting position is horizontal.
Instrument can also be mounted up to a 15
degree angle with the rear of the instrument
above the front, or down to a 75 degree angle
with the rear of the instrument below the front.
Adjustments:
Zero and span adjustments are accessible in
the service (partially withdrawn) position, and
provide a minimum of 2% adjustment after
the instrument has been calibrated. Ribbon
indicator has an adjustment for zeroing relative
to pen. No separate ribbon span adjustment is
necessary, since the ribbon travels with the pen.
These instruments have been designed for use
in ordinary locations.
Accuracy:
Repeatability:
Page 63
127S
Connections:
located on the rear of the instrument chassis in
accordance with the standard arrangement for
102 and 101 Series Shelves.
Front Door:
Hinged at bottom to provide access to chart
and pens. Lens material is transparent molded
polycarbonate.
Right Side Access Cover and Calibration Door:
Removable access cover and a hinged-down
calibration door provide access to internal parts
and adjustments.
Nominal Dimensions:
69 mm wide x 165 mm high x 478 mm long (2.7
in wide x 6.5 in high x 18.8 in long).
Pens:
1, 2, or 3, as specified.
Red Pen: Located in center position.
Left Side Access Cover:

Sliding cover provides access to internal
parts. Cover material is transparent molded
polycarbonate.
Instrument Mounting:
Up to 10 instruments can be mounted in
Foxboro 102 Series Shelves (706 mm [27.8 in]
deep). Up to 4 instruments can be mounted in
Foxboro 101 Series Shelves (544 mm [21.4 in]
deep). Shelves are designed for flush mounting
in 3 to 25 mm (0.13 to 1 in) thick panels.
Nameplate:
A gray polycarbonate nameplate is attached
to the lower surface of the front door. It
provides space for 3 lines which can have
approximately 24 characters (including spaces)
to accommodate a description of each input
signal. A green, red, and blue (from top to
bottom) color identification dot at the beginning
of each line corresponds to the pen color and
applicable input signal description.
Green Pen: Located in inner position.

Blue Pen: Located in outer position.
Pen Separation: Approximately 12 minutes at
the standard chart speed of 20 mm/h (0.8 in/h).
Optional Features
Chart Drives:
The following chart drives are available at supply
voltages of 24, 120, or 240 V, and frequencies
of 50 or 60 Hz; EXCEPTION: 5 mm/h (0.2 in/h)
not available with 24 V. Selectable by specifying
single or dual speed, chart speed, voltage, and
frequency.
Single Speed: 5, 10, 20, 40, 80, 120, 320, 720
and 2400 mm/h (0.2, 0.4, 0.8, 1.6, 3.1, 4.7, 6.4,
28.2 and 96.0 in/h).
Dual Speed: 20 mm/h and 20 mm/min (0.8 in/h
and 0.8 in/min). 20 mm/h and 40 mm/min (0.8
in/h and 1.6 in/min).
Pneumatic Impulse: 20 mm/h (0.75 in/h).
Page 64
Special Pen Position for 2-Pen Recorder:

Optionally available is a 2-pen recorder with the
red pen in the center position and the blue pen
in the outer position. Selectable by specifying
model number for 2-pen recorder and AS
Reference SPP.
Charts:
A selection of standard charts is available. Refer
to Foxboro Chart and Dial Catalog 600.
Alarm Lamps:
Refer to Page 72.

127S
How to Order
1) SPECIFY MODEL NUMBER: 127S-
__ __ __ __ __
Pen and Indicator Quantity and Color:
1 pen and 1 indicator (red)........................................................................................... 1

2 pens and 2 indicators (red and green).................................................................... 2
3 pens and 3 indicators (red, green, and blue)......................................................... 3
Chart Drive:
Electric, single speed, 20 mm/h (0.8 in/h)...........................................................................E

Pneumatic impulse, 20 mm/h (0.8 in/h). Not available with code 3 above.
Codes X and 0 below must be specified.......................................................................P
Voltage:

120 V ac............................................................................................................................................A
240 V ac............................................................................................................................................ B
24 V ac..............................................................................................................................................C
None. Select with Chart Drive code P..........................................................................................X
Frequency:
50 Hz ....................................................................................................................................................... 5
60 Hz ....................................................................................................................................................... 6
None. Select with Chart Drive code P.................................................................................................. 0
Optional Feature:
3 alarm lamps, externally operated. Available with Voltage code C above only................................... L

3) SPECIFY SCALE RANGES AND CHART RANGES FROM CHART AND DIAL
CATALOG 600____________________________________________________________________
Page 65

CONSOTROL Indicators
110
n
Simple
Construction
No cables, clutches, or complicated
mechanisms
Ball and socket connectors for
frictionless linkage
n
B
old,
Readable Display
Large, brightly colored pointers
n
Easy
Calibration
Indicator partially slides out of shelf
Adjustments made at front end of panel
n
Integral
The 110 Series Pneumatic CONSOTROL

Indicators indicate 1, 2, or 3 process
measurements received as proportional
pneumatic signals from remote transmitters.
Recording
Optional circular chart recording
mechanism
n
Versatile
Mounting
Singly or with other instruments in 102
or 101 Series Shelves
General Specification Sheet GS 2B-3D1 A.
Element:
One brass bellows per variable.
Scale:
Vertical. Effective length 100 mm (4 in). Black
figures on clear plastic, scaled as specified.
Damping:
Integral and adjustable.
Input Signal:
Pointers:
Red, green, blue.
-20 and +65C (0 and 150F).
Accuracy:
Dead Band:
Less than 0.1 % of calibrated span.
Repeatability:
Mounting:
Flush in panels 3 to 25 mm (0.13 to 1 in) thick
using 102 or 101 Series Shelves. Indicators
require 1 unit width of mounting capacity.
Nameplate:
high black characters. Maximum of 2 lines, 17
characters or spaces per line.
Connections:
Electrical and pneumatic multiprong receptacles
on rear of chassis.
Overall Dimensions:
165 mm high x 71 mm wide x 554 mm deep (6.5
in high x 2.8 in wide x 21.8 in deep).
Page 66
110
Optional Features
Chart Record:
Single variable indicators only may be furnished
with an integral recording mechanism to
provide a continuous record on a nominal 125
mm (5 in) circular chart with 50 mm (2 in) wide
recording area. Electrical 2-speed chart drive,
24 h/24 min/off or 7 day/2.8 h/off rotation, as
specified. Supply voltage 24, 120, or 240 V
ac, 50 or 60 Hz, as specified. 24 V ac must be
specified when alarm option is used. Foxboro
and CSA certified for ordinary and Class I,
Groups C and D, Division 2 hazardous locations.
CSA certified units, Source - Canada. Maximum
angle mounting is 15 degrees from vertical.

Refer to Page 72.
How to Order
________
One Variable.............................................................................................................................................. 111

Two Variables............................................................................................................................................ 112
Three Variables.......................................................................................................................................... 113

3) SPECIFY SCALE RANGESREFER TO CHART AND DIAL CATALOG 600________________
6) SPECIFY NAMEPLATE AND INFORMATION FOR INSTRUMENT TAG___________________
Page 67
(Loading, Switching & Bias)
135 Series Manual

Loading, Switching, and
Bias Stations
135
n
Selective
135 Series Stations are complementary

auxiliary units for 100 Series Control Systems.
Pneumatic Switching
n
Remote
Control Setting
n
Manual
Loading of Final Operators

General Specification Sheet GS 2B-4H2 A.
Model 135S:
Passes a standard input signal to a final operator
or manually generates an accurate standard signal.
It is normally used in control loops where a single
master controller regulates two or more final operators. The station contains a vertical scale, indicating the input signal and the output of the manual
generator. By matching the two indicators on the
vertical scale and flipping the simple 2-position
transfer switch, a bumpless transfer is ensured.
Model 135SG:
Performs the same function as the Model 135S
(above). An additional pointer is provided to
display a standard input signal.
Model 135T:
Provides an accurate manually adjusted standard
output signal used for remote manual control of
final operators or for the remote setting of any
pneumatic receiver. A manual adjusting knob
regulates a stable standard output indicated on
a 100 mm (4 in) vertical scale.
Model 135TG:
Performs the same function as the Model 135T
(above). An additional pointer is provided to
display a standard input signal.
Model 135TG2:
Performs the same function as the Model 135T.
Two additional pointers are provided to display
standard input signals.
Page 68
Model 135B:
Performs the same functions as the Model 135S
with the added feature that up to 100% bias may
be manually added to the standard input signal. It
is normally used where a single master controller
regulates two or more final operators, or where it
remotely sets two or more controllers, and where it
is necessary to bias one with respect to the other.
This unit has three pointers. One is used to indicate
the manually generated signal and the other two
indicate the input signal before and after it is biased.
-20 and +65C (0 and 150F).
Input/Output Signal and Supply Pressure:

Input/Output Signal
Supply Pressure
20 to 100 kPa
3 to 15 psi
140 to 150 kPa

20 to 22 psi
(Loading, Switching & Bias)

135
Receiver-lndicator:
Accuracy: 0.5% of calibrated span.
Manual Output Pointer:

Output Indicator: 0.5% of calibrated span.
Repeatability: 0.25% of calibrated span.
Repeatability of Setting: 0.25% of calibrated span.
Dead Band: Less than 0.1% of calibrated span.
Element:
Brass bellows.
Scale:
100 mm (4 in) vertical, black markings on white
background.
Pointers:
Manual output: black.
Bias output: red.
Inputs: green and blue.
Connections:
Electrical and pneumatic multiprong receptacles
on rear of chassis.
Nameplate:
high black letters. Maximum of 2 lines, 17 letters
or spaces per line.
Mounting:
Flush in panels 3 to 25 mm (0.13 to 1 in) thick
using 102 or 101 Series Shelves. Units require 1
unit of mounting capacity.
Optional Features
Refer to Page 72.
How to Order

________
Manual Loading........................................................................................................................................ 135T

Manual Loading with Variable Indicator..............................................................................................135TG
Manual Loading with Two Variable Indicators................................................................................... 135TG2
Automatic/Manual Switching.................................................................................................................. 135S
Automatic/Manual Switching with Variable Indicator........................................................................135SG
Automatic/Manual Switching and Bias.................................................................................................. 135B
2) SPECIFY INPUT AND OUTPUT SIGNALS_____________________________________________

3) SPECIFY SCALE RANGESREFER TO CHART AND DIAL CATALOG 600________________
Page 69
(Computing Elements)
556 Series and Model 557

Pneumatic Analog
Computers
556, 557
n
Versatile
Multiply
Divide
Square
Square root
n
W
ide
Range of Applications
Flexible scaling for multiplication and
division
n
Built-in
Units provide output proportional to

mathematical function of input. Model 557
performs square root function only.
Function Switch
To select any of four computing
functions
n
Weatherproof
Plastic cover
Die-cast, low copper content aluminum
alloy manifold
IEC IP53 and NEMA Type 3

Specification Sheets PSS 2B-5E1 A and B.
Functions and Related Equations:
The 556 Series performs any one of four
functions and solves an equation as shown in
the table. The 557 performs square root only.

Function Equation
Multiplication
Square Root
B = A
Square
A = C2
Division
A = fB(z+sC)
A
(f) (z + sC)
B=
A, B. and C are pneumatic signals expressed as

decimal equivalents of percent of span.
f = Scaling factor (limits: 0.750 and 3.500).
s = Span factor for C signal (limits: 0.050 and
1.000).
z = Zero suppression of C signal (limits: 0.000
and 0.950).
NOTE: The sum of s and z must equal 1.000.
Page 70
Input and Output Signals:

Supply Pressure Limits:
130 and 150 kPa or 19 and 22 psi.
-40 and +80C (-40 and + 180F).
Air Consumption Under Normal Operation:
<.10 m3/h (.06 scfm) at standard conditions.
Air Connections:
All air connections are tapped for 1/4 NPT.
Mounting:
A bracket is supplied for vertical mounting on
a rack or DN 50 or 2 in pipe. The bracket is
designed for either horizontal or vertical pipes
or rack struts.
(Computing Elements)
556, 557
Accuracy:
Multiplication: 0.5% of output span referred to
input.
Repeatability:
0.1 % of output span.
Division: 0.5% of output span referred to input.

Square Root:
556: 0.25% of output span referred to input.
557: 0.5% of output span referred to input.
Square: 0.5% of output span.
Materials of Construction:
Cover: Molded plastic with textured gray finish.
Manifold: Low copper content aluminum alloy
die-casting with a gray epoxy finish.
Environmental Protection:
The housing construction is weatherproof. It
is dust-protected as defined in IEC IP53 and
provides the environmental protection of NEMA
Type 3.
Flexures: 17-4 PH stainless steel.

A and C Bellows: Brass.
B Diaphragm: Copper alloy.
How to Order

________
Function Formula
Multiplication
A = fB(z+sC)
Division
B = A/f(z + sC)
Square Root (a)
B = A
Square
a + C2
Square Root
B = A
.............................................................................556-8
.............................................................................556-9
........................................................................... 556-10
........................................................................... 556-11
.............................................................................. 557
(a) Refer also to Model 557, and accuracy statement in PERFORMANCE SPECIFICATIONS.
2) SPECIFY INPUT/OUTPUT RANGE IN PROCESS UNITS_________________________________

3) SPECIFY FOR MODELS 556-8 AND 556-9:
SUPPLY THE VALUE OF f, s, AND z__________________________________________________
DEFINE INPUT/OUTPUT SIGNAL RANGE DESIRED, kPa OR psi________________________
Page 71
(Miscellaneous)
130MD, 130PD, 130FD, 138, 130M-N, 102, 101, 120
130MD, 130PD &

130FD Series Pneumatic
CONSOTROL Control Stations
130MD, 130PD, and 130FD Series
Pneumatic CONSOTROL Control
Stations provide Panel-Mounted
measurement, set point, and
auto/ manual transfer functions
to operate separately mounted
controllers. The stations are used
with the 138 Series Controllers to
minimize time lag resulting from
long distances between control
panels and the process.
130M-N Series Pneumatic

CONSOTROL Indicating
Gap Controllers
138 Series Remote Mounted

Pneumatic Controllers
138 Series Remote Mounted Pneumatic

Controllers are used with 130MD,130PD, and
130FD Series Control Stations. They provide the
response advantage of a local controller with
the convenience of a Panel-Mounted display.
102 & 101 Series Pneumatic

CONSOTROL Shelves
The Model 130M-N7 Differential

Gap Controller is an on/off unit
with an adjustable inert zone (gap)
within which the controller will not
respond to changes in the measurement.
The Model 130M-N94 Gap Action
Floating Controller provides standard proportional plus integral control action when the measurement
exceeds the high or low gap limit.

CONSOTROL Recorders
120 Series Pneumatic CONSOTROL Recorders

record up to four process measurements received
as standard pneumatic transmission signals from
remote transmitters. Large, brightly colored pens
clearly indicate the measurement. The recording
is on a SCAN-FOLD chart.
Page 72
102 and 101 Series Pneumatic CONSOTROL

Shelves allow flush panel mounting of pneumatic
CONSOTROL instruments in panels. They are
compact units, available in ten sizes for one to ten
instruments. The shelves allow instruments to be
wholly or partially withdrawn without interfering
with the operation of others.
Alarm Actuators
and Alarm Lamps
100 Series Pneumatic Alarm Actuators are

available integrally mounted in CONSOTROL 100
instruments. The actuators are operated directly
by the pneumatic input signals. They provide
high sensitivity, accuracy, and dependability by
eliminating intermediate receiver mechanisms. A
wide variety of alarm configurations is available.
Converters
Converters
Many processes require both electronic and pneumatic instrumentation.
Converters allow you to integrate that combination into your control strategy.
Foxboro makes converters for both purposes:

CURRENT-TO-PNEUMATIC (I/P) E69 SERIES
Available with a selection of input/output signals
Small, compact, lightweightfor easy installation
High air delivery rate for direct valve actuation
Page 73
Converters
(Current-to-Pneumatic)
E69, E69R
E69F and E69R Series

Current-to-Pneumatic
Converters
n
Light,
E69F and E69R Series Current-toPneumatic Converters accept a dc

milliampere input signal and convert to a
proportional pneumatic output signal.
Compact
Easy to install
n
Low Air Consumption
Reduced operation costs
n
High Air Capacity
Eliminates need for volume boosters
n
Choice of Various Input and Output Signals
Suitable for all applications
n
Sealed Air Purged Case (E69F)
Long-term dependability in dirty

environments
n
Precise Performance
Product Specification Sheets PSS 4-8B1 A
(E69F) and 2B-2A2 A (E69R).
Input Signal Ranges (mA dc):
4 to 20, 4 to 12, 12 to 20.
10 to 50, 10 to 30, 30 to 50.
Supply Pressure: (a)

Nominal
140 kPa or 20 psi

240 kPa or 35 psi
Output Signal Ranges:

20 to 100 kPa or 3 to 15 psi.
3 to 27 psi.
Limits
130 and 160 kPa or 19 and 23 psi
225 and 260 kPa or 33 and 38 psi
a) Not less than 20 kPa or 3 psi above maximum output.
FM, CSA, and ATEX certified. Explosion proof
and intrinsically safe versions available. Refer to
Foxboro for complete specifications.
Input Impedance:
170 (4 to 20 mA dc).
27 (10 to 50 mA dc).
Accuracy:
Output Signal codes 2 and 3: 1.0% of
calibrated span.
Output Signal codes 7 and 8: 2% of
calibrated span.
Linearity:
0.5% of calibrated span typical.
Repeatability:
0.25% of calibrated span typical.
E69F Enclosure:
Die-cast copper (1% maximum) aluminum

alloy body and cover (ASTM 512A and 512B),
with a vinyl or epoxy powder finish. Meets the
Page 74
requirements of IEC IP65 and provides the

Mounting:
Valve yoke, surface, or DN 50 or 2 in pipe.
Calibrated for vertical mounting unless otherwise
specified. Bracket is supplied as standard.
Input/Output Connections:
Electrical: Tapped 1/2 in for conduit fitting to
connect to a pair of 0.5m (18 in) long 18 AWG
(1.0 mm2) twisted leads.
Pneumatic:
1/4 NPT for air supply and output signal.
Converters
E69F, E69R

E69R
Enclosure:
Die-cast aluminum front and back plates with
extruded top and bottom rails and steel side
covers. Finish is vinyl, polyurethane, or
acrylic enamel.
Mounting:
Up to 6 units may be mounted across in a 483
mm (19 in) rack.
Input/Output Connections (on front panel):
Electrical: Screw terminal with terminal cover.
Pneumatic: 1/4 NPT for air supply and out signal.
Optional Features
Alternative Output Signal:
Refer to Foxboro for other than standard output
signals.
Mounted integral to converter. PG 11 Cable

Gland (Trumpet Connector) for non explosionproof applications.
Adjustable Filter Regulator (E69F):

Provided without gauge.
Miniature Junction Box (E69F):

Consists of an aluminum box, 64 x 58 x 33 mm
(2.5 x 2.3 x 1.3 in), and meets the IEC/ IP65
requirements and the environmental protection
of NEMA Type 4. Provided with 1/2 in conduit,
20 mm threaded hole, or PG 11 or PG 13.5
Trumpet Type Cable Connectors.
Supply (Input) and Output Pressure Gauges

(E69F):
Mounted integral to converter.
Explosionproof Junction Box (E69F):
Assembled to Valve Actuator by Foxboro (E69F).
How to Order
1) SPECIFY MODEL NUMBER: E69F-
__ __ __ __
Housing:
Bolted cover (weatherproof)................................................................................................ B

Threaded cover (explosionproof).........................................................................................T
Input Signal (a), (b) and Impedance:
4 to 20 mA dc (170 ).....................................................................................................................I
10 to 50 mA dc (27 )....................................................................................................................H
Output Signal (c):

kPa psi
20 to 100
3 to 15
40 to 200
6 to 30
................................................................................ 2
................................................................................ 3

3 to 27
................................................................................ 3

7 to 125
1 to 18
................................................................................ 7

7 to 220
1 to 32
................................................................................ 8
Other ....................................................................................................................................................... X
Optional Features:
Explosionproof junction box.......................................................................................................................... J

Adjustable filter regulator without gauge.................................................................................................... R
Supply/output gauges..................................................................................................................................... S
Miniature junction box (1/2 in conduit connector) - front entry (d)..........................................................M
Miniature junction box (1/2 in conduit connector) - rear entry (d)............................................................ P
a) Converter action may be direct or reverse. (Specify.)

b) Input signal may be split-ranged (i.e., 4 to 12 mA). (Specify.)
c) When ordering valves not employing valve positioners, specify code 7 or 8 depending on the actuator spring range.
d) Cannot be used with Electrical Classification CS-E/LD-E.
This product and its components are protected by U.S. Patent 4,213,478.
Corresponding patents have been issued or are pending in other countries.
Page 75
Converters
E69, E69R

1) SPECIFY MODEL NUMBER: E69R-
__ __
Housing:
Input Signal (a), (b) and Impedance:
4 to 20 mA dc (170 )............................................................................................................................. I
10 to 50 mA dc (27 )............................................................................................................................ H
Output Signal (c):

kPa psi
20 to 100
3 to 15
40 to 200
6 to 30
......................................................................................... 2
......................................................................................... 3

3 to 27
......................................................................................... 3

7 to 125
1 to 18
......................................................................................... 7

7 to 220
1 to 32
......................................................................................... 8
Other ................................................................................................................................................................ X
a) Converter action may be direct or reverse. (Specify.)
b) Input signal may be split-ranged (i.e., 4 to 12 mA) (Specify.)
c) When ordering valves not employing valve positioners, specify code 7 or 8 depending on the actuator spring range.
2) SPECIFY DIRECT OR REVERSE ACTION______________________________________________

3) SPECIFY OUTPUT SIGNAL___________________________________________________________
4) SPECIFY ELECTRICAL CLASSIFICATION______________________________________________
5) SPECIFY OPTIONAL FEATURES______________________________________________________
Page 76
Control Valves
(Actuators)
2A, P SERIES, 20F/P50, 30C/P110
2A Series Cylinder Actuator

with Power Positioner
E69P Series Current-ToPneumatic Valve Positioners
The 2A Series Cylinders are used to actuate

dampers, gates, shutters, doors, and large
control valves. Power positioners are required
with all pneumatic cylinders for throttling action.
They convert the standard 20 to 100 kPa (3 to 15
psi) controller signal to full supply pressure on
the cylinder piston and assure precise, positive
positioning. Cylinders are available in bore sizes
83 through 355 mm (3 1/4 through 14 in) with
strokes up to 810 mm (32 in).
The E69P Series Current-to-Pneumatic valve

Positioner converts a direct current milliampere
input signal into a pneumatic output signal
for positioning control valve actuators. It
eliminates the need for a separate converter
and a separate positioner. It is available with the
following input signal ranges (mA): 4 to 20, 4 to
12, 12 to 20, 10 to 50, 10 to 30, 30 to 50 with
a corresponding output sugnal of up to 240 or
420 dPa (35 or 60 psi, 2.4 or 4.2 bar of kg/cm2).
Models 20F/P50 & 30C/P110

Diaphragm Lever Actuators
The Models 20F/P50 and 30C/P110 Diaphragm

Lever Actuators are used to actuate dampers,
gates, and butterfly valves. The topworks of
the size P50 and P110 Diaphragm Actuators
are made of vinylcoated, die-cast aluminum.
Maximum input pressure is 420 kPa (60 psi).
Bracket material is cast iron, and the carbon
steel lever is predrilled. Lever strokes range
from 116 to 254 mm (4.56 to 10 in).
P Series Pneumatic Spring

Diaphragm Actuators
The P Series Actuators can operate a variety

of control valves, dampers, louvers, and gates.
They are lightweight field-reversible units with
low hysteresis and fast, precise response.

Model
P25
P50
P110
Maximum Stroke
Effective Area
in2
mm in m2
19
3/4 0.016
38
1 1/2
0.032
57
2 1/4
0.071
Material
Construction
25
aluminum
50
with cast
110
iron yoke
Nominal input signal: 20 to 100 or 40 to 200 kPa

(3to 15 or 6 to 30 psi).
Page 77

Humitex Circular and Strip Charts
Foxboro recording charts complement the precision and fine craftsmanship of our wide range of
recording instruments. Charts combine the essential elements of special high-quality paper with rigidly
controlled printing and trimming procedures. Over 17,000 different charts can be supplied in ranges
and calibrations to meet the requirements of practically any process recording application. Special
charts and new ranges not listed in the Chart Catalog and Dial List (Catalog 600) may require a new
electro printing plate for specific customer needs. Contact our nearest Branch Office for Catalog 600.
Chart Purchase Agreement

Any Foxboro instrument user with an estimated yearly requirement of 500 boxes of circular and/or
500 boxes of strip charts or more may request a Chart Purchase Agreement. Under the agreement
system, quantity prices are applied to the individual chart purchase order. The agreement is
continuous, reviewed yearly for actual purchases, and a 30-day advance notice to changes is given.
Refer to Foxboro with your annual requirements to receive a Chart Purchase Agreement.
Minimum Order Quantity15 boxes of circular charts or 15 boxes of strip charts.
Toll Free Number
To order charts, call 888-FOXBORO (888-369-2676).
Types of Calibration Charts Available for Circular and Strip Charts
Uniform, Differential Pressure, Flow (Type 27), Vacuum Pressure, Square Root, Vapor Pressure, Dairy
Charts, Dew Point, Thermocouple, Thermopile, Flow-Open Channel Weir and Flume, Log Function,
Specific Gravity, and Balsbaugh.
Circular Chart Specifications

Standard circular charts are printed with gray
ink, 1 side only, on 0.122 mm (0.0048 in) thick
paper. Circular charts with heavy paper are
printed on 0.178 mm (0.0070 in) paper. Charts
are packaged 100 to a box.
Instrument
Chart Size
125 mm (5 in) Side-Mounted
Recorder125 mm (5 in) (a)
12 Series Recorders300 mm (12 in)
40/740 Series Recorders ..300 mm (12 in)
39A Series Flow Recorders..300 mm (12 in) (a)
39 B Series Flow Recorders...MW Series

300mm (12in)(a)
740R Series Recorders...300 mm (12 in)
a) Always printed on heavy paper.
Foxboro also prints circular charts for

American Meter, Arcco-Anubis, Bailey,
Bristol, Gotham (Ametek), Honeywell (Brown),
Mercury, Palmer, Ranarex (Permutit), Rockwell,
Taylor, UGC Industries, Warren Controls
(Tagliabue), and Weksler which are made to
their specifications.
Page 78
Options for 300 mm (12 in) Circular Charts:

Description
Code (b)
Heavy Paper
Backprinting (c)
Mullins Slotting (d)
Overprinting of Two-Color Charts (f)
Color of Ink on Chart:
Green
Scanner Blue Ink
Black
Aqua
Dark Blue
Shrink Wrap
-HP
-BP
-MS-HP
-OP
-GRN
-BLU-SBI
-BLK
-AQUA
-DBLU
-SW
b) Add as suffix to circular chart number.

c) Add Foxboro backprint number.
d) Specify drop time and/or day of the week.
e) Specify time.
f) Must be available as an existing chart; see Catalog 600.

Strip Chart Specifications
4 in Roll,100 mm Roll, and SCAN-FOLD charts can be supplied with or without time mark numbering.
Standard time mark numbering is the hour of the day printed on the left side of the chart at 2-hour
intervals (on the even hour). The standard speed for the 4 in Roll and SCAN-FOLD is 3/4 in/h which
coincides with the chart drive speed. The standard speed for the 100 mm Roll is 20 mm/h.
A large selection of non-standard time mark numbering is available to match the chart speeds of your
recorders. Refer to Catalog 600 for a listing.
4 in Roll Chart............................................................................................................ One 30-day chart per box
100 mm Roll Chart.................................................................................................... One 30-day chart per box
SCAN-FOLD Chart................................................................................................... Two 16-day charts per box
Recorders Chart
E20S
4 in Roll or SCAN-FOLD

53
For 4 in Roll, specify chart number

54
suffix -T if time numbering is required.
64

120
For SCAN-FOLD, specify chart number

220S
suffix -6TX if time numbering is required.

E27R
126S
100 mm Roll only
127S

226S
Specify chart number suffix -T if time numbering is required.
227S
760R

761R L0120NP

Fold - L0122RQ 50 Divisions

- L0122RS 0-100 Linear

762R

Roll - L0122RR 50 Divisions

- L0122RT 0-100 Linear

751R

Fold - L0122RS 0-100 Linear

Roll - L0122RT 0-100 Linear
Page 79

Pens and Pen Arms
n
Large,
Disposable, Fiber Tip Pens for

Circular Chart Recording Instruments
n
Designed
to Write 365 meters

(1200 feet)
n
Prepackaged
6 Pens per Card
Recording
40, 40M, 40P, and 39 Series Rectangular Case Recorders:

Pen Location

1-Pen
2-Pen
inner
outer
3-Pen
inner
center
outer
4-Pen
inner
next to inner
next to outer
outer
Pen Arm, Item 1
Fiber Tip Pens (Package of 6), Item 2
Part Identification
Number Holes
Color
A Length
Part
Number mm in
L0121CH
12
0.47
0044897
Red
M0122AC
0044897
1
2
Violet
Red
L0121CM
L0121CH
6
12
0.24
0.47
M0122AC
0044897
M0122AB
1
2
3
Violet
Red
Green
L0121CM
L0121CH
L0121CU
6
12
18
0.24
0.47
0.71
M0122AC
0044897
M0122AB
M0122AA
1
2
3
0
Violet
Red
Green
Blue
L0121CM
L0121CH
L0121CU
L0121DA
6
12
18
24
0.24
0.47
0.71
0.94
12R Series Round Case Recorders:

Pen
Location

1-Pen
2-Pen
outer
inner
Pen Arm, Item 1
Part Identification
Number Holes
Color
A Length
Part
Number mm in
0044899
Red
L0121CH
12
0.47
0046965
0044899
3
2
Violet
Red
L0121CR
L0121C J
6
12
0.24
0.47
12RD (1 to 3 Pen) and 12RM (1 and 2 Pen) Series Round Case Recorders:

Pen Location

1-Pen
2-Pen
inner
outer
3-Pen
inner
center
outer
Pen Arm, Item 1
Part Identification
Number Holes
Color
A Length
Part
Number mm in
0044899
Red
L0121CT
18
0.71
0046964
0044899
1
2
Violet
Red
L0121CR
L0121CT
12
18
0.47
0.71
M0122NE
0046964
0044899
0
1
2
Violet
Red
Green
L0121CR
L0121CT
L0121CZ
12
18
24
0.47
0.71
0.94
To order, call 888-FOXBORO (888-369-2676).
Page 80

Recording Controllers
40, 40M, and 40P Series Rectangular Case Recording Controllers:

Pen Arm/lndex, Item 1


A Length
Controller
Pen
Part
Identification
Part

Type
Location
Number
Color
Number
mm in
Holes or Color

1-Pen
0044897
2
Single Action

Index
0032301
Plain
Red L0121CH 12 0.47

2-Pen
Single Action

inner
with

outer
Additional Pen

Index
M0122AC
0044897
M0122LT

3-Pen
Single Action inner

with 2 center
Additional Pens outer

Index
M0122AC
1
0044897
2
M0122AB
3
M0122LT Red
0044897
1
2
Red
Violet
Red
L0121CR
L0121CT
12
18
0.47
0.71
Violet
Red
Green
L0121CR
L0121CT
L0121CZ
12
18
24
0.47
0.71
0.94
Red
L0121CY
24
0.94

1-Pen

Index
Triple Setting inner
center
outer
M0122LS
M0122LT
M0122MA

2-Pen

inner
Ratio
outer

Index
M0122AC
1
0044897
2
M0122LS Violet
Violet
Red
L0121CR
L0121CT
12
18
0.47
0.71

3-Pen

inner
Ratio with inner

center
Additional Pen
outer

Index
M0122AC
1
0044897
2
M0122AB
3
M0122LS Violet
Violet
Red
Green
L0121CR
L0121CT
L0121CZ
12
18
24
0.47
0.71
0.94
Red
L0121CT
18
0.71
Red
Violet
L0121CT
L0121DB
18
24
0.71
0.94
Violet
Red
Green

1-Pen
0044897 2

Index
Duplex
inner
M0122LT
Red
outer
M0122LS
Violet

2-Pen
Auto-Selector, inner
M0122AC
1
Dual, or Duplex outer
0044897
2

with
Index
Additional Pen inner
M0122LT
Red
outer
M0122LS
Violet
1. On multiple pen recorders, if pens L0121CR (Violet), LC 121CS (Black), L0121CP (Green), or L012 CQ (Blue) are used as arcing pens, then the
red inner pen (L0121CJ) must be used. Its length is 6 mm (0.24 in)
2. Black pens may be substituted for red or violet as follows:
Use L0121CN for pen arm lengths of 6 mm (0.24 in)
Use L0121CS for pen arm lengths of 12 mm (0.47 in)
3. If replacing box pens with fiber tip pens, the color dot on the pen arm (Item 1 in drawing on preceding page) must be removed.
Disposable Fiber Tip Pen Cartridges for 40P/40M/12 and 740 Chart Recorders:
A-Length
mm in Red

6
12
18
24
0.24
0.47
0.71
0.94
L0121CJ
L0121CH
L0121CT
L0121CY
Violet Green Blue Black

L0121CM
L0121CR
L0121CW
L0121DB
L0121CK
L0121CP
L0121CU
L0121CZ
L0121CL
L0121CQ
L0121CV
L0121DA
L0121CN
L0121CS
L0121CX
L0121DC
Page 81
Trademarks
Alumel is a trademark of Hoskins Manufacturing Company.

Aminco is a trademark of American Instrument Company.
Bakelite is a trademark of Union Carbide Corporation.
Carpenter is a trademark of Carpenter Technology Corporation.
Chromel is a trademark of Hoskins Manufacturing Company.
Dacron is a trademark of E. I. duPont de Nemours & Company, Inc.
Duranickel is a trademark of Huntington Alloys, Incorporated.
Fluorinert is a trademark of 3M Company.
Fluorolube is a trademark of Hooker Chemical Corporation.
Grafoil is a trademark of Union Carbide Corporation.
Hastelloy is a trademark of Stellite Division of Cabot Corporation.
HART ia a trademark of the HART Foundation
Inconel is a trademark of Huntington Alloys, Incorporated.
Kel-F is a trademark of 3M Company.
Kynar is a trademark of The Pennwalt Corporation.
Linatex is a trademark of Wilkinson Process Rubber, Ltd.
Monel is a trademark of Huntington Alloys, Incorporated.
Ni-Span is a trademark of Huntington Alloys, Incorporated.
Noryl is a trademark of The General Electric Company.
Ryton is a trademark of Phillips Petroleum Company.
Teflon is a trademark of E. I. duPont de Nemours & Company, Inc.
Tefzel is a trademark of E. I. duPont de Nemours & Company, Inc.
TriClamp is a trademark of Ladish Company.
Viton is a trademark of DuPont Dow Elastomers L.L.C.
17-4 PH is a trademark of Armco Steel Corporation.
17-7 PH is a trademark of Armco Steel Corporation.
The following are trademarks of The Foxboro Company:
CONSOTROL
DEWCEL
d/p Cell
DYNATHERM
FOXBORO
HUMITEX
SCANFOLD
The lntelligent Automation People is a Service Mark of The Foxboro Company.
Page 82
Product Index
101 Series Shelf............................... Page 72

102 Series Shelf......................................... 72
120 Series Recorders................................ 72
130 M-N Gap Controller.......................... 72
138 Series................................................... 72
2A Actuator................................................ 77
E69P Series................................................. 77
Absolute Pressure Transmitters.............. 15
Actuators..................................................... 77
Adjustable Range Transmitters..................3
Air Filters..................................................... 27
Air Regulators............................................ 27
Airsets......................................................... 27
Alarm Actuators......................................... 72
Alarm Lamps.............................................. 72
Alarms......................................................... 72
Analog Computers.................................... 70
Auto Selector Control Systems................ 61
Bias Stations............................................... 68
Buoyancy Transmitter............................... 27
Bypass Manifolds....................................... 27
Chart Pen Arms.......................................... 81
Chart Pens.................................................. 81
Chart Purchase Agreement...................... 78
Computers.................................................. 70
CONSOTROL Shelf.......... 59, 61, 63, 66, 72
CONSOTROL.............................................. 72
Control Stations......................................... 72
Control Valves............................................ 77
Controller....................................... 37, 46, 72
Converters.................................................. 73
Current to Pneumatic Converter............. 74
d/p Cell................................................... 3, 18
Density Transmitter................................... 18
Dew Point Measurement System............ 35
DEWCEL...................................................... 35
Diaphragm Differential Pressure Element... 52
Diaphragm Pressure Seals....................... 34
Electronic Servo Elements....................... 54
Filled Thermal System Elements............. 51

Flanged Transmitters................................ 18
Flanged Unions.......................................... 29
Flow Integrators............................................9
Gap Controllers......................................... 72
Gauge Pressure Transmitters.................. 12
Humitex Circular Charts........................... 78
Humitex Strip Charts................................. 78
IFOA Series................................................. 31
Indicating Controllers.....37, 43, 46, 48, 59
Indicating Transmitters............................. 27
Indicators ........................37, 40, 43, 46, 66
Integral Flow Orifice Assemblies............ 31
Integrators.....................................................9
Lamps.......................................................... 72
Lever Actuators.......................................... 77
Liquid Level Transmitters...................18, 27
Loading Stations........................................ 68
Low Range Transmitters..............................3
Manual Station........................................... 68
Model 101.................................................. 72
Model 102.................................................. 72
Model 110.................................................. 66
Model 11AH............................................... 15
Model 11AL................................................ 15
Model 11AM.............................................. 15
Model 11DM.................................................7
Model 11GH............................................... 12
Model 11GM.............................................. 12
Model 120.................................................. 72
Model 127S................................................ 63
Model 12A.................................................. 24
Model 12AS............................................... 24
Model 130M-N.......................................... 72
Model 130F................................................ 59
Model 130FD............................................. 72
Model 130M............................................... 59
Model 130MD............................................ 72
Model 130P................................................ 59
continued next page
Page 83
Product Index continued
Model 130PD............................................. 72
Model 135.................................................. 68
Model 138.................................................. 72
Model 13A.....................................................3
Model 13DEMP......................................... 21
Model 13DMP............................................ 21
Model 13F.................................................. 18
Model 13FE................................................ 18
Model 13H.....................................................3
Model 14A.....................................................9
Model 15A.....................................................3
Model 15F.................................................. 18
Model 17BS................................................ 27
Model 17BT................................................ 27
Model 20F.................................................. 77
Model 30C.................................................. 77
Model 40M...........................................37, 43
Model 40P............................................37, 43
Model 43AP............................................... 40
Model 43APG............................................ 46
Model 45P.................................................. 27
Model 556 / 557........................................ 70
Model E69F................................................ 74
Model E69R................................................ 74
Model P110................................................ 77
Model P50.................................................. 77
MR Series Receiver Gauges..................... 57
MR Series.................................................... 57
Orifice Plates.............................................. 29
Pneumatic Flow Integrator..........................9
Pneumatic Transmitters....................3, 7, 12
Positioners.................................................. 77
Pressure Measuring Elements................. 49
Pressure Seals............................................ 34
Pressure Transmitter Seals....................... 21
Receiver Gauges........................................ 57
Recorders..........................37, 43, 46, 63, 72
Recording Indicating Controllers......37, 46
Remote Mounted Controllers.................. 72
Page 84
Servo Elements.......................................... 55
Spring Diaphragm Actuators................... 77
Switching Stations..................................... 68
Temperature Transmitters........................ 26
Thermal Elements...................................... 51
Thermowells............................................... 35
Transmitters.............................................. 3, 7
Type 37....................................................... 48
Type 70....................................................... 57
Unions......................................................... 29
Ordering
Specifying Your Instrument or Accessory
You can easily specify many instruments and accessories described in this
catalog. Sections covering our most popular items include all the technical data
you need to know for most applications. To specify the appropriate item, simply
follow the step-by-step procedure at the end of each description. Your Foxboro
representative can help also.
For Example:
Choose the product code.
Itemize the information needed to complete the specification.
Ordering:
To order, contact your Foxboro representative.
Or call, in North America: 1-866-746-6477, or International: 001-508-549-2424.
Or visit www.buyautomation.com/officelocator.
Give us the ordering information using this catalog. Then tell us where you want
the order shipped and when you need it delivered. Well do the rest.
Need Help?
If you have questions, let us know. Were ready, and eager, to assist you.
Applications are a Foxboro specialty. We can help you figure out the best
instrument for your purpose.
Instrument catalog available ask your Foxboro representative about it.

Transmitter:

316 ss body.......................................................................................................... A
Monel body.......................................................................................................... A4
Hastelloy C body (supplied without process connectors)............................. A5
Span Limits:

5 and 62 kPa or 20 and 250 inH2O P....................................................................... M

50 and 210 kPa or 200 and 850 inH2O P................................................................ H
Body Material:

316 ss (13A only)..................................................................................................................... S

Monel (13A4 only)................................................................................................................... M
Hastelloy C (13A5 only) (Process Connectors code 0 below must be specified........... C
Process Connectors:
1/4 NPT.............................................................................................................................................. 1
1/2 NPT.............................................................................................................................................. 2
R1/4.................................................................................................................................................... 3
R1/2.................................................................................................................................................... 4
Welding neck for 14 x 21 mm tube and 1/2 in Schedule 80 pipe............................................ 6
None, body tapped for 1/4 NPT.................................................................................................... 0

Zero elevation kit........................................................................................................................................ L

Zero suppression kit.................................................................................................................................. R
2) SPECIFY OUTPUT SIGNAL___________________________________________________

3) SPECIFY CALIBRATED DIFFERENTIAL PRESSURE RANGE_______________________
4) SPECIFY ADDITIONAL OPTIONAL FEATURES_________________________________
5) SPECIFY INFORMATION FOR INSTRUMENT TAG______________________________
33 Commercial Street
Foxboro, Massachusetts 02035-2099 U.S.A.
Your Foxboro representative:

Catalog Foxboro Pneumatic Instruments 03-11

Uploaded by

Copyright:

Available Formats

Catalog Foxboro Pneumatic Instruments 03-11

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog Foxboro Pneumatic Instruments 03-11

Uploaded by

Copyright:

Available Formats

Ordering

Specifying Your Instrument or Accessory

1) SPECIFY MODEL NUMBER: 13

5 and 62 kPa or 20 and 250 inH2O P....................................................................... M

316 ss (13A only)..................................................................................................................... S

Optional Features: (also see previous page)

Zero elevation kit........................................................................................................................................ L

2) SPECIFY OUTPUT SIGNAL___________________________________________________

Your Foxboro representative:

Differential Pressure..................................................................................... Page 3

Primary Measurement Elements

Orifice Plates and Flange Unions........................................................................ 29

Large Case Instruments

Panel-Mounted Pneumatic Instruments

Accessories and Supplies

HUMITEX Circular and Strip Charts.................................................................... 78

Foxboro Pneumatic Transmitters are the industry standard.

Liquid Level Measurement

15A, 13A, 13H Series

15A, 13A, 13H

range transmitter adjustable for

for ranges from 0-5 to

For complete specifications, refer to

The 15A, 13A, 13H Series Pneumatic d/p

Process Temperature Limits:

Range Limits (a)

(a) Nonzero-based ranges require optional zero elevation

Output Signal and Suppiy Pressure:

15A Series: 0.5% of calibrated span.

0.1% of calibrated span.

0.1% of calibrated span.

Pneumatic Transmitters (Differential Pressure)

Air Supply Set:

High Process Temperature:

Chlorine Service Preparation:

Hydrogen Service Preparation:

Oxygen Service Preparation:

1.3 and 6 kPa or 5 and 25 inH20 P......................................................................................L

316 ss (15A only)............................................................................................................................. S

Optional Features: (also see previous page)

Zero elevation kit.............................................................................................................................................. L

1) SPECIFY MODEL NUMBER: 13

____ - ___ ___ ___ - ___

5 and 62 kPa or 20 and 250 inH20 P.................................................................................M

316 ss (13A only)............................................................................................................................. S

Optional Features: (also see previous page)

Zero elevation kit...............................................................................................................................................L

15A, 13A, 13H

How to Order (continued)

____ - ___ ___ ___ - ___

316 ss body .................................................................................................................. A

5 and 62 kPa or 20 and 250 inH20 P.................................................................................M

316 ss (13HA only).......................................................................................................................... S

Process Connectors: (a)

Optional Features: (also see Page 4)

Zero elevation kit.............................................................................................................................................. L

2) SPECIFY OUTPUT SIGNAL__________________________________________________________

11DM Series Pneumatic

For complete specifications, refer to

The 11 DM Series Pneumatic Differential

__ - _ _ _ - ___

__ - _ _ _ - ___