Disk Operating System (MS DOS)

Disk Operating System (DOS)

 As with any other operating system, its function is to oversee the operation of the system by providing support for executing programs, controlling I/O devices, handling errors, and providing the user interface.

MS-DOS is a disk-based, single-user, singletask operating system. These qualities make it one of the easiest disk operating systems to understand.
3

DOS FILES

The main portions of MS-DOS are the IO.SYS, MSDOS.SYS, and COMMAND.COM files. IO.SYS and MSDOS.SYS are special, hidden system files The IO.SYS file moves the systems basic I/O functions into memory and then implements the MSDOS default control programs, referred to as device drivers, for various hardware components. These include the following: The boot disk drive The console display and keyboard The systems time-of-day clock The parallel and serial communications port

COMMAND.COM

The COMMAND.COM command interpreter accepts commands issued through the keyboard, or other input device, and carries them out according to the commands definition

When DOS runs an application, COMMAND.COM finds the program, loads it into memory, and then gives it control of the system. When the program is shut down, it passes control back to the command interpreter.
5

Popular DOS Versions

MS-DOS 3 With DOS 3.0, released in summer 1984, Microsoft continued to include additional DOS features and to support more powerful hardware. DOS 3.0 supported hard drives larger than 10MB, as well as enhanced graphics formats. Three revisions3.1, 3.2, and 3.3provided additional innovations
6

MS-DOS 4

By 1988 it was apparent that the wave of the future was the graphical interface, and DOS 4 provided users with the DOS Shell, a utility much like the Windows File Manager. Actually, DOS Shell was simply a scaleddown version of Windows that allowed users to manage files, run programs, and do routine maintenance, all from a single screen. The DOS Shell even supported a mouse.
7

MS-DOS 5

There were several important features introduced in the 1991 release of DOS 5.0. First of all, the ability to load drivers into reserved (upper) memory was a relief to those people who were constantly running out of conventional memory. This feature allowed more complex DOS programs. Several software utilities made their debut. The most commonly used utility introduced at this time was EDIT.COM. Also added were QBASIC.EXE, DOSKEY, UNFORMAT, and UNDELETE.
8

MS-DOS 6

Released in 1993 to excellent sales, DOS 6.0 offered a number of new commands and configurable options. Another enhancement in DOS 6.0 was EMM386.EXE, which allowed the system to pool extended and expanded memory. DOS 6.0 has subsequently been revised a number of times. As of this date, DOS 6.22 is the most current MS-DOS version available as a stand-alone operating system.

The main functions of DOS

DOS translate the command issued of the user in the format that is understood by the computer to execute it, also error message in the format for the user to understand. Manage disk files,

Allocate system resources according to the requirement. DOS provides features essential to control hardware devices such as Keyboard, Screen, Disk Devices, Printers, Modems and programs.
10

Loading of DOS

The system start-up routine of ROM runs a test called Power On Self Test (POST) which check whether peripherals connected to the computer are working or not & RAM memory. The ROM bootstrap loader attempts to read the Boot record and if successful, passes the control on to it. The instructions/programs in the boot record then load the rest of the program. The boot tries to load the DOS into the memory by reading the two hidden files IO.SYS, MSDOS.SYS, If these two are found, they are loaded along with the DOS command interpreter COMMAND.COM.
11

4.2 COMPUTER FILES IN DOS

A file may contain a program or any other kind of information. DOS permits the user to assign a name consisting of two parts to a file primary (a maximum of eight characters consisting of Characters, Alphabets, Number and Hyphen), and secondary names( should consist of three characters, which is optional) this two parts separated by a dot (.). Using an extension is specified, using the complete name . Using extensions can be an excellent way of naming a file so that it can be identified easily.

12

Examples:
Filename
Employee
Employee.Exe Employee.Dbf

Primary Name Employee

Separator Secondary Name

13

DOS has a way of showing which disk drive is currently active. The floppy disk
drives are assigned alphabets A and B, whereas the hard disk drive is assigned the alphabet C. Ex: If your PC includes a hard disk, besides a FDD (Floppy Disk Drive), the drive names would be A and C. If the prompt is A, then it implies that the first floppy disk drive is active. Where as the DOS prompt would be C, if the hard disk is active. Data as well as instructions reside in a file stored in a disk.
14

4.3 DIRECTORY STRUCTURE IN DOS

Directory is just like a file folder, which contain all the logically related files. DOS files are organized in a hierarchical or an inverted tree-like structure. DOS enables the user to organize the files in a disk into directories and sub-directories A directory within another directory is called a subdirectory Of course, there may be sub-directories of subdirectories, subsub.
15

Levels of Directory Systems

16

4.4 DIRECTORY COMMAND

The directory, the user is in at any point of time, is called the WORKING/PRESENT/CURRENT directory. DOS indicates which directory you are in by displaying the directory's name in the command prompt. For example, the following command prompt indicate that you are in the DOS directory: C:\DOS>. Knowing which directory is current helps you find files, and to move from one directory to another more easily. Typically, the ROOT DIRECTORY (\) is the initial working directory. The entire specification of directory from root is called a PATH. By itself, the DIR command is applicable to the working/present directory. The names of the sub-directories at adjacent levels are separated by backslash (\), while specifying the path to be followed while traveling to a sub-directory.

17

4.5 USING PATH TO SPECIFY THE LOCATION OF FILES

A path is the route that leads from the root directory of a drive to the file you want to use.
For example , to access C:\NOS\LETTER\NOS.LET Where (C:) represent the drive the file is on , 1st (\) is the root directory. 2 nd (\) separates the NOS
directory from the LETTER sub-directory . 3rd (\) separates the LETTER directories from the NOS.LET. subfile name,
18

Internal File COMMANDS

(Ren) 3. Delete (Del) 4. Copy 5. Type 7. Set Attributes (attrib)

19

External File COMMANDS

02