3122

D 5800 -10

D3241-09e1

D2983-09

GSO /1785
:2007

ISO 199011:2005

ISO 199012:2004

ISO 199014:2003

Standard Test Method for Evaporation

Loss of Lubricating Oils by the Noack
Method
Standard Test Method for Thermal
Oxidation Stability of Aviation Turbine
Fuels
Standard Test Method for LowTemperature Viscosity of Lubricants
Measured by Brookfield Viscometer
Lubricating Oils for internal
Combustion Engines
Comparison evaluation of oxidation
stability for base oil and lubricating oil
by oxidation glass cell
Petroleum and natural gas industries -Specific requirements for offshore
structures -- Part 1: Metocean design and
operating considerations
Petroleum and natural gas industries -Specific requirements for offshore
structures -- Part 2: Seismic design
procedures and criteria
Petroleum and natural gas industries -Specific requirements for offshore
structures -- Part 4: Geotechnical and
foundation design considerations

.2

.3

.4

.5

.6

-
: -

.7

-
:2 -

.8

-
:4 -

.9

3122

ISO 199015:2003

ISO
19903:2006

ISO 199041:2006

ISO
10416:2008
ISO Guide
73:2009

ISO 3010:2009

ISO
31000:2009

ASTM D404504

ASTM D513408

ASTM D704210

Petroleum and natural gas industries -Specific requirements for offshore

structures -- Part 5: Weight control
during engineering and construction
Petroleum and natural gas industries -Fixed concrete offshore structures
Petroleum and natural gas industries -Floating offshore structures -- Part 1:
Monohulls, semi-submersibles and spars
Petroleum and natural gas industries -Drilling fluids -- Laboratory testing

-
:5 -

.:

.21

-
: 1 -

.22

- -

.23

Risk management Vocabulary

.24

.25

.26

.27

.28

) (

.29

Risk management Ris Assessment

Techniques
Risk management Principles and
Guidelines
Standard Test Method for Sulfur in
Petroleum Products by Hydrogenolysis
and Rateometric Colorimetry
Standard Test Method for Detailed
Analysis of Petroleum Naphthas through
n-Nonane by Capillary Gas
Chromatography
Test Method for Dynamic Viscosity and
Density of Liquids by Stabinger
Viscometer (and the Calculation of

3122

Kinematic Viscosity)

ISO 3771 :1994

3839 :1996 ISO

ISO 3675:1998

ISO
12185:1996

ISO 4262:1993

ISO 7536:1994

GSO ISO
3924:2008

ASTM
D5454-04

Petroleum products -- Determination of

base number -- Perchloric acid
potentiometric titration method
Petroleum products -- Determination of
bromine number of distillates and
aliphatic olefins -- Electrometric method
Crude petroleum and liquid petroleum
products -- Laboratory determination of
density -- Hydrometer method.
Crude petroleum and petroleum products
-- Determination of density -- Oscillating
U-tube method
Petroleum product Determination of
carbon residue Ramsbott1om method
Petroleum product Determination of
oxidation stability of gasoline Induction
period method.
Petroleum products - Determination of
boiling range distribution - Gas
chromatography method
Test method for water vapour content of
gaseous fuels using electronic moisture
analyzer

-


-

.2:

.31

.32

.33
.34

.35

.36

.37

3122

Preparation of steel substrates before

ISO 8504 - 2
application of paints and related products
Abrasive blast-cleaning methods
Preparation of steel substrates before
application of paints and related products
ISO 8504 - 3
Hand- and power-tool cleaning
methods
Crude petroleum and petroleum products
-- Transfer accountability -- Assessment
ISO 8697:1999
of on board quantity (OBQ) and quantity
remaining on board (ROB)
Crude petroleum and petroleum products
- Transfer accountability - Assessment of
ISO
vessel experience factor on loading
13740:1998
(VEFL) and vessel experience factor on
discharging (VEFD) of ocean-going
tanker vessels
Crude petroleum -- Transfer
ISO 9403:2000
accountability -- Guidelines for cargo
inspection
Crude petroleum and petroleum products
ISO
-- Bulk cargo transfer -- Guidelines for
11563:2003
achieving the fullness of pipelines
Petroleum and natural gas industries -ISO10431:1993
Pumping units Specification
Petroleum & Natural Gas Industries;
SAES-A-111
Borrow Pit Requirements

-


-

-
( -
( )
)

.38

.39

.3:

-
-
) (
) (

.41

- -

.42

-
-

.43

.44

.45

3122

SAES-A-115

SAES-D-116

Petroleum and natural gas industries Groundwater Monitoring Well Design

Petroleum and natural gas industries Underground Storage Tank System

ISO 10442

Petroleum & Natural Gas Industries; Integrally-Geared

Centrifugal Air Compressors

.48

32-SAMSS016

.49

ISO 13709

.4:

01-SAMSS035

SAEP-1132

Petroleum & Natural Gas Industries;

Self-Cleaning Air Filters
Petroleum & Natural Gas Industries;
Centrifugal pumps for petroleum,
petrochemical and natural gas industries
Petroleum and natural gas industries
specifications Line Pipe
Petroleum and natural gas industries Instructions for Using the Relief Valve
Test Stand

SAEP-1134

SAEP-340

SAEP-13

SAES-S-007

Petroleum and natural gas industries Relief Valve Technician Certification

Petroleum and natural gas industries Air Dispersion Modeling and Emission
Inventory
Petroleum and natural gas industries Project Environmental Impact
Assessments
Petroleum and natural gas industries Solid Waste Landfill Standard

.46
.47

.51
.52

.53

.54

.55

.56

3122

SAEP-1661

17-SAMSS006

SAEP-1161

SAES-A-004

SAEP-324

SAMSS

SMASS

SMASS

SMASS

Petroleum and natural gas industries

Waste Minimization Opportunity
Assessments
Petroleum and natural gas industries Galvanic Anods for Cathodic Protection
Petroleum and natural gas industries Testing and Inspection (T&I) Reporting
Procedure
Petroleum and natural gas industries General Requirements for Pressure
Testing

.57

Petroleum and natural gas industries Certification Review and Registration of Project
Welders

Petroleum and Natural gas Industries:

Cathodic Protection of Above ground
storage Tanks
Petroleum and Natural gas Industries:
Reinforced Thermoset Resin (RTR) Pipe
and Fittings in water and Hydrocarbon
Services
Petroleum and Natural gas Industries:
Design of Nonmetalic Piping in water
and Hydrocarbon Injection Systems
Petroleum and Natural gas Industries:
Construction of Nonmetalic Piping in
water and Hydrocarbon Injection

.58
.59

.5:

.61

.62

-
) (
( RTR)

.63

-


-

.64

.65

3122

Systems

ASTM
D7551-10

ASTM
D4150-08

Test Method for Standard

Determination of Total Volatile Sulfur in
Hydrocarbons and Liquefied Gaseous
Petroleum Gases and Natural Gas by
Fluorescence Ultraviolet
Standard Terminology Relating to
Gaseous Fuels

Standard Test Method for Total Sulfur

D ASTM
Hydrogenolysis and in Gaseous Fuels by
4468-85(2006)
Rateometric Colorimetry
Standard Practice for Total Sulfur
ASTM D7166On-line/At-line for Analyzer Based
10
Sulfur Content of Gaseous Fuels
ASTM
Test Methods for Relative Standard
D1070 03
Density of Gaseous Fuels
(2010)
Standard Practice for On-line/At-line
ASTM
of Gaseous Determination Heating Value
D7164-10
Fuels by Gas Chromatography
Practice for Determination of Standard
ASTM
the Heating Value of Gaseous Fuels
D7314-10
Calorimetry and On-line/At-line using
Sampling

.66

.67

.68

.69

.6:

.71

.72

3122

Practice for Gas Standard

Chromatograph Based On-line/At-line
Content of Gaseous Analysis for Sulfur
Fuels

.73

Test Methods for Volumetric Standard

Measurement of Gaseous Fuel Samples

.74

Test Method for Gross Standard

Coke Petroleum Moisture in Green

.75

ASTM D7165 10

ASTM
D1071 83(2008)
ASTM D4931 06
ASTM
D478493(2010)

ASTM D62282010

ASTM
D446885(2006)

Specification for LNG Standard

Density Calculation Models
Standard Test Method for
in Determination of Sulfur Compounds
Natural Gas and Gaseous Fuels by Gas
Chromatography and Flame Photometric
Detection
Standard Test Method for Mercaptans
Length-of-Stain in Natural Gas Using
Detector Tubes
QUALITY REQUIREMENT FOR
PROCUREMENTS OF MATERIALS
FOR OIL AND GAS INDUSTRY
QUALITY REQUIREMENT FOR
PROJECTS IN OIL AND GAS
INDUSTRY

.76

.77

.78

.79

.7:

3122

ISO
21457:2010

ISO 8943:2007

ISO 181322:2008

External coating of riser

.81

Petroleum and natural gas industries:

Corrosion Inhibitors and their Injection
Package for Oil and Production
Petroleum and natural gas industries :
Fabrication, Inspection and installation
of Cabon, Carbon-Manganes and low
alloy Ferritic Steel Process Pipework
Petroleum and natural gas industries:
Fabrication, Inspection and installation
of Austenitic and 25% Cr Supper Duplex
Stainless Steel, Copper Base and Nickel
Base Alloy Process Pipework
Internal coating and lining of steel
Pressure Vessels
Petroleum, and natural gas industries -Materials selection and corrosion control
for oil and gas production systems
Refrigerated light hydrocarbon fluids -Sampling of liquefied natural gas -Continuous and intermittent methods
Refrigerated light hydrocarbon fluids -General requirements for automatic level
gauges -- Part 2: Gauges in refrigeratedtype shore tanks

:


:

,

:

%25

Petroleum, and natural gas industries

:






:

.82

.83

.84

.85
.86

.87

.88

.89

3122

Pipeline Internal coating lining part 1 :

liquid Epoxy coating
Petroleum, and natural gas industries:
Pipeline Internal coating lining part 2:
Fusion Bonded Epoxy coating
TECHNICAL SPECIFICATION FOR
CLEANING, GAUGING AND
FLOODING OF NEW PIPELINES
TECHNICAL SPECIFICATION FOR
HYDROSTATIC TESTING OF NEW
PIPELINES
PRE-COMMISSIONING AND
COMMISSIONING OF PIPELINES
Petroleum, petrochemical and natural gas
ISO
industries -- Reciprocating positive
13710:2004
displacement pumps
Petroleum and natural gas industries -ISO 19901 - 3 :
Specific requirements for offshore
2008
structures -- Part 3: Topsides structure
Petroleum and natural gas special
ISO 19901 - 6 :
requirements of offshore installations 2008
Part VI - Naval operations
Petroleum and natural gas industries -ISO15546:2007
Aluminum alloy drill pipe
Petroleum and natural gas industries -ISO 15156Materials for use in H2S-containing
1:2006
environments in oil and gas production --

:
:

:

.8:

.91

.92

.93

.94

-


- -



--

: 1 -- H2S

.95

.96
.97
.98

3122

ISO 151562:2006

Part 1: General principles for selection of

cracking-resistant materials

-


: 2

.99

Petroleum and natural gas industries -Materials for use in H2S -containing
environments oil and gas production part3 :Cracking -resistant CRAs
(corrosion-resistant alloys) and other
alloys.
Paints and varnishes -- Performance
requirements for protective paint systems
for offshore and related structures
Petroleum products -- Fuels (class F)
classification -- Part 1: Categories of
marine fuels
Petroleum products -- Fuels (class F) -Specifications of marine fuels

-
H2S
- :3 -
) (
.

.9:

.:1

-) (-
- -

.:2

( -
-)

.:3

Petroleum and natural gas industries Materials for use in H2S-containing

environments in oil and gas production Part 2 : cracking-resistant carbon and
low alloy steels, and the use of cast irons

ISO 151563:2006

ISO
20340:2009

Salt in crude oil ( electronetric method )

.:4

Saybolt colour of prtroleum products (

saybolt chromometer method )

.:5

Refrigerated non-petroleum-based

.:6

3122

liquefied gaseous fuels -- Dimethylether

(DME) -- Method of manual sampling
onshore terminals

Fireproofing of Structural Steel Work

.:7

.:8

.:9

-
-

.::

-
1 -

.211

-
: 4 -

.212

Unification of flow meter accuracy in

petroleum industries
Fire protection system and safety
equipment
Petroleum, petrochemical and natural gas
industries -- Sector-specific quality
management systems -- Requirements
for product and service supply
organizations
Petroleum and natural gas industries -Cements and materials for well
cementing -- Part 1: Specification
Petroleum and natural gas industries -Drilling and production equipment -Part 4: Practices for side-pocket
mandrels and related equipment
Petroleum, petrochemical and natural gas
industries - Method of test for fire
dampers

.213

213

 3122


) (DS

1
1
1
213
1