Professional Documents
Culture Documents
Isoupdate June10
Isoupdate June10
3 4 8 11 24 25 25
Membership change
The Direction Nationale des Industries (MLIDNI) of Mali has been readmitted, as a member body, with retroactive effect as from 1 January 2010. Its contact details read as follow: MALI (MLIDNI) Direction Nationale des Industries Ministre de l'Industrie, des Investissements et du Commerce Avenue Cheick Zayed - Lafiabougou BP : 278 BAMAKO Directrice: Mme Traore Haby Sow Tel. Fax E-Mail +223 20 29 57 60 +223 20 29 61 38 haby_s@hotmail.com
Correspondent member
PALESTINE (PSI) Chief Executive Officer: Mr. Mazen Abu Sharia
TC 61
ISO/CD 9772
Plastics
Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame (Revision of ISO 9772:2001, ISO 9772:2001/Amd 1:2003) Plastics Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (Revision of ISO 9773:1998, ISO 9773:1998/Amd 1:2003)
CD registered
Period from 05 May to 07 June 2010 These documents are currently under consideration in the technical committee. They have been registered at the Central Secretariat. ISO/CD 9773
TC 2
ISO/CD 10683
Fasteners TC 79
Fasteners Non-electrolytically applied zinc flake coatings (Revision of ISO 10683:2000) ISO/CD 6363-1
TC 6
ISO/CD 8784-2
TC 20
ISO/CD PAS 21100
TC 21
ISO/CD 6182-10
TC 30
ISO/CD 12242
ISO/CD 6363-5
TC 38
ISO/CD 13629
Textiles
Textiles Determination of antifungal activity of textile products ISO/CD 6363-6
TC 43
ISO/CD 17497-2
Acoustics
Acoustics Sound-scattering properties of surfaces Part 2: Measurement of the directional diffusion coefficient in a free field
TC 119
ISO/CD 2739
Powder metallurgy
Sintered metal bushes Determination of radial crushing strength (Revision of ISO 2739:2006)
TC 60
ISO/CD 1328-1
Gears TC 123
Cylindrical gears ISO system of tolerance classification Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth (Revision of ISO 1328-1:1995) ISO/CD 7148-1
Plain bearings
Plain bearings Testing of the tribological behaviour of bearing materials Part 1: Testing of bearing metals (Revision of ISO 7148-1:1999)
ISO/CD 7148-2
Plain bearings Testing of the tribological behaviour of bearing materials Part 2: Testing of polymer-based bearing materials (Revision of ISO 7148-2:1999) Plain bearings Pad materials for tilting pad bearings
TC 206
ISO/CD 13125
Fine ceramics
Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for antifungal activity of semiconducting photocatalytic materials
ISO/CD 14287
TC 210
TC 131
ISO/CD 6263
TC 146
ISO/CD 13199
Air quality
Stationary source emissions Determination of total volatile organic carbon (TVOC) in waste gases from non-combustion processes Nondispersive infrared analyser equipped with catalytic converter
TC 250
ISO/CD 20121
CASCO
ISO/IEC CD 17020
TC 172
ISO/CD 8039
JTC 1
ISO/IEC DTR 14165-372 ISO/IEC 15938-6:2003/ PDAM 4
Information technology
Information technology Fibre Channel Part 372: Methodologies of interconnects-2 (FC-MI-2) Information technology Multimedia content description interface Part 6: Reference software Amendment 4: Reference software for video signature tools
ISO/CD 8578
ISO/CD 8980-3
TC 184
ISO/TS 15926-4:2007/ CD Amd 1
DIS circulated
Period from 05 May to 07 June 2010 These documents have obtained substantial support within the appropriate ISO technical committee They have been submitted to the ISO member bodies for voting by the date shown *Available in English only Vote terminates
TC 190
ISO/CD 13196
Soil quality
Soil quality Screening soils for selected elements using X-ray fluorescence spectrometry
TC 204
ISO/CD 15623
ISO/CD TS 16401-1
TC 6
ISO/DIS 2493-2
ISO/CD TS 16401-2
ISO/DIS 5628
ISO/CD TS 16403-1
TC 8
ISO/CD TS 16407-2
ISO/CD TS 16410-2
ISO/DIS 30005 * Ships and marine technology Ship 2010-10-22 recycling management systems Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations (Revision of ISO/PRF PAS 30005)
TC 20
ISO/DIS 15163
Milk and milk products Calf rennet 2010-10-22 and adult bovine rennet Determination by chromatography of chymosin and bovine pepsin
ISO/DIS 10794 * Space systems Programme 2010-10-15 management Material, mechanical parts and processes ISO/DIS 11893 * Space systems Programme 2010-11-03 management Project organization ISO/DIS 14300-1 * Space systems Programme management Part 1: Structuring of a project (Revision of ISO 14300-1:2001) 2010-11-03
TC 37
ISO/DIS 24614-2
TC 41
ISO/DIS 12046.2
TC 21
ISO/DIS 7203-2 * Fire extinguishing media Foam 2010-10-06 concentrates Part 2: Specifications for medium and high expansion foam concentrates for top application to water-immiscible liquids (Revision of ISO 7203-2:1995) ISO/DIS 15779.2 * Condensed-aerosol fireextinguishing systems Requirements and test methods for components and system design, installation and maintenance General requirements * Smoke and heat control systems Part 9: Specification for control equipment 2010-07-12
TC 43
ISO/DIS 3745
Acoustics
* Acoustics Determination of sound 2010-10-07 power levels and sound energy levels of noise sources using sound pressure Precision methods for anechoic test rooms and hemianechoic test rooms (Revision of ISO 3745:2003)
TC 44
2010-10-19 ISO/DIS 15609-5
ISO/DIS 21927-9
TC 22
ISO/DIS 11446-1
Road vehicles
* Road vehicles Connectors for the 2010-10-08 electrical connection of towing and towed vehicles Part 1: 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords (Revision of ISO 11446:2004) * Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords (Revision of ISO 11446:2004) 2010-10-08
ISO/DIS 17654
Destructive tests on welds in metallic 2010-10-28 materials Resistance welding Pressure test on resistance seam welds (Revision of ISO 17654:2003)
ISO/DIS 11446-2
TC 45
ISO/DIS 1407
ISO/DIS 28017
ISO/DIS 15006 * Road vehicles Ergonomic aspects 2010-11-04 of transport information and control systems Specifications for invehicle auditory presentation (Revision of ISO 15006:2004)
Rubber hoses and hose assemblies, 2010-11-04 wire or textile reinforced, for dredging applications Specification (Revision of ISO 28017:2009) Rubber and plastics hoses 2010-08-04 Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties (Revision of ISO 8580:1987, ISO 11758:1995, ISO 11758:1995/Cor 1: 1998)
ISO/DIS 30013.2
TC 28
ISO/DIS 13032
TC 46
ISO/DIS 27730
TC 34
ISO/DIS 7700-2
Food products
Food products Checking the performance of moisture meters in use Part 2: Moisture meters for oilseeds (Revision of ISO 7700-2:1987) 2010-10-18
ISO/DIS 30300 * Information and documentation Management system for records Fundamentals and vocabulary
2010-10-22
ISO/DIS 30301 * Information and documentation Management system for records Requirements
2010-01-01
TC 69
TC 58
Gas cylinders
2010-11-01
ISO/DIS 13088 * Gas cylinders Acetylene cylinder bundles Filling conditions and filling inspection
ISO/DIS 3951-4 * Sampling procedures for inspection by variables Part 4: Procedures for assessment of declared quality levels ISO/DIS 13053-1 Quantitative methods in process improvement Six Sigma Part 1: DMAIC methodology Quantitative methods in process improvement Six Sigma Part 2: Tools and techniques * Statistical methods in process management Capability and performance Part 6: Process capability statistics for characteristics following a multivariate normal distribution
2010-10-22
TC 59
ISO 11600: 2002/DAmd 1
Building construction
* Building construction Jointing products Classification and requirements for sealants Amendment 1 2010-10-07 ISO/DIS 13053-2
2010-10-22
ISO/DIS 21929-1
* Sustainability in building 2010-10-28 construction Sustainability indicators Part 1: Framework for the development of indicators and a core set of indicators for buildings (Revision of ISO/TS 21929-1:2006)
ISO/DIS 22514-6
2010-10-15
TC 76
TC 61
ISO/DIS 1133-1.2
Plastics
Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method (Revision of ISO 1133:2005, ISO 1133:2005/Cor 1:2006) 2010-08-04 ISO/DIS 13926-3
Transfusion, infusion and injection equipment for medical and pharmaceutical use
* Pen systems Part 3: Seals for pen-injectors for medical use 2010-10-27
TC 106
ISO/DIS 6875
Dentistry
Dental patient chair (Revision of ISO 6875:1995) Dentistry Dental units Part 1: General requirements and test methods (Revision of ISO 7494-1:2004) 2010-10-28
ISO/DIS 1133-2.2
Plastics Determination of the melt 2010-08-04 mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to timetemperature history and/or moisture Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm (Revision of ISO 11833-1:2007) 2010-11-04
ISO/DIS 7494-1
2010-10-28
ISO/DIS 11833-1
TC 120
ISO/DIS 14930.4
Leather
* Leather Leather for dress gloves 2010-07-11 Specification
ISO/DIS 16131 * Leather Upholstery leather 2010-10-15 characteristics Selection of leather for furniture
ISO/DIS 22196 * Measurement of antibacterial activity 2010-10-07 on plastics and non-porous surfaces (Revision of ISO 22196:2007)
TC 126
ISO 10315: 2000/DAmd 1
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
2010-10-07
ISO/DIS 13501 * Petroleum and natural gas industries Drilling fluids Processing systems evaluation (Revision of ISO 13501:2005) ISO/DIS 20312.2 Petroleum and natural gas industries Design and operating limits of drill strings with aluminium alloy components
2010-11-08
2010-08-04
* Cigarettes Determination of water 2010-11-08 in smoke condensates Part 2: Karl Fischer method Amendment 1
TC 130
ISO/DIS 12647-8
Graphic technology
* Graphic technology Process 2010-11-05 control for the production of half-tone colour separations, proof and production prints Part 8: Validation print processes working directly from digital data
ISO/DIS 23936-2
* Petroleum, petrochemical and 2010-10-21 natural gas industries Non-metallic materials in contact with media related to oil and gas production Part 2: Elastomers
TC 131
TC 172
ISO/DIS 23584-2
ISO/DIS 6162-1 * Hydraulic fluid power Flange 2010-10-29 connections with split or one-piece flange clamps and metric or inch screws Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (Revision of ISO 6162-1:2002, ISO 6162-1:2002/Cor 1:2004) ISO/DIS 6195 Fluid power systems and components Cylinder-rod wiperring housings in reciprocating applications Dimensions and tolerances (Revision of ISO 6195:2002) 2010-10-28
TC 188
ISO/DIS 12217-2
Small craft
Small craft Stability and buoyancy 2010-10-07 assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m (Revision of ISO 12217-2:2002) Small craft Stability and buoyancy 2010-10-07 assessment and categorization Part 3: Boats of hull length less than 6m (Revision of ISO 12217-3:2002) Immersion suits Part 1: Constant wear suits, requirements including safety (Revision of ISO 15027-1:2002) Immersion suits Part 2: Abandonment suits, requirements including safety (Revision of ISO 15027-2:2002) Immersion suits Part 3: Test methods (Revision of ISO 15027-3:2002) 2010-11-04
ISO/DIS 12217-3
ISO/DIS 6953-3
Pneumatic fluid power 2010-10-18 Compressed air pressure regulators and filter-regulators Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
ISO/DIS 15027-1
TC 138
ISO/DIS 15027-2
2010-11-04
ISO 8483:2003/ * Glass-reinforced thermosetting 2010-10-19 DAmd 1 plastics (GRP) pipes and fittings Test methods to prove the design of bolted flange joints Amendment 1 ISO 8533:2003/ * Glass-reinforced thermosetting DAmd 1 plastics (GRP) pipes and fittings Test methods to prove the design of cemented or wrapped joints Amendment 1 ISO 15306: 2003/DAmd 1 * Glass-reinforced thermosetting plastics (GRP) pipes Determination of the resistance to cyclic internal pressure Amendment 1 2010-10-19
ISO/DIS 15027-3
2010-11-04
TC 190
ISO/DIS 11269-1
Soil quality
Soil quality Determination of the 2010-10-08 effects of pollutants on soil flora Part 1: Method for the measurement of inhibition of root growth (Revision of ISO 11269-1:1993) Soil quality Determination of the 2010-10-08 effects of pollutants on soil flora Part 2: Effects of contaminated soils on the emergence and early growth of higher plants (Revision of ISO 11269-2:2005) Soil quality Sampling of soil invertebrates Part 5: Sampling and extraction of soil macroinvertebrates 2010-10-14
2010-10-19
ISO/DIS 11269-2
ISO/DIS 19893
Plastics piping systems 2010-10-12 Thermoplastics pipes and fittings for hot and cold water Test method for the resistance of mounted assemblies to temperature cycling
ISO/DIS 23611-5
TC 147
ISO/DIS 5814
Water quality
* Water quality Determination of 2010-10-21 dissolved oxygen Electrochemical probe method (Revision of ISO 5814:1990) Water quality Measurement of polonium 210 activity concentration in water by alpha spectrometry 2010-10-08
TC 194
ISO/DIS 10993-12
ISO/DIS 13161
TC 199
ISO/DIS 13849-2
Safety of machinery
* Safety of machinery Safety-related 2010-10-28 parts of control systems Part 2: Validation (Revision of ISO 13849-2:2003)
ISO/DIS 29201 * Water quality The variability of test 2010-10-12 results and the uncertainty of measurement of microbiological enumeration methods
TC 164
TC 207
ISO/DIS 14051
Environmental management
Environmental management Material flow cost accounting General framework 2010-10-28
ISO/DIS 12108 * Metallic materials Fatigue testing 2010-10-12 Fatigue crack growth method (Revision of ISO 12108:2002)
TC 211
TC 22
Road vehicles
2010-07-13
TC 219
Floor coverings
2010-10-15
ISO/FDIS 27955 Road vehicles Securing of cargo in passenger cars, station wagons and multi-purpose vehicles Requirements and test methods
ISO/DIS 11638 * Resilient floor coverings Heterogeneous poly(vinyl chloride) flooring on foam Specification ISO/DIS 24343-2 * Resilient and laminate floor coverings Determination of indentation and residual indentation Part 2: Resilient floor covering: Short-term residual indentation
TC 23
2010-10-11
ISO/FDIS 11783-14
ISO/FDIS 11783-6
ISO/DIS 24343-3.2
* Resilient and laminate floor 2010-07-11 coverings Determination of indentation and residual indentation Part 3: Resilient semi-flexible/vinyl composition tiles: Indentation
TC 24
TC 234
ISO/DIS 12875
ISO/FDIS 9277 * Determination of the specific surface 2010-08-01 area of solids by gas adsorption BET method (Revision of ISO 9277:1995)
TC 28
JTC 1
ISO/IEC DIS 16353
Information technology
* Information technology Telecommunications and information exchange between systems Front-End Configuration Command for NFC-WI (NFC-FEC) 2010-10-06 ISO/FDIS 4263-3
TC 38
ISO/FDIS 2307
Textiles
Fibre ropes Determination of certain physical and mechanical properties (Revision of ISO 2307:2005) 2010-07-14
FDIS circulated
ISO/FDIS 9554 Period from 05 May to 07 June 2010 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown *Available in English only Vote terminates
ISO/FDIS 10617 Textiles Standard data format for colorimetric communication Textiles and related measurements
TC 43
Acoustics
TC 6
ISO/FDIS 3039 * Corrugated fibreboard Determination of grammage of the component papers after separation (Revision of ISO 3039:1975)
ISO/FDIS 3741 * Acoustics Determination of sound 2010-07-14 power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms (Revision of ISO 3741:1999, ISO 3741:1999/Cor 1:2001) ISO/FDIS 3743-1 * Acoustics Determination of sound 2010-07-14 power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hardwalled test room (Revision of ISO 3743-1:1994)
TC 20
ISO/FDIS 12273 Aerospace Nuts, anchor, self2010-08-08 locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/ 235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/ 425 degrees C Dimensions (Revision of ISO 12273:1997)
ISO/FDIS 3744 * Acoustics Determination of sound 2010-07-14 power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (Revision of ISO 3744:1994) ISO/FDIS 10140-1 * Acoustics Laboratory 2010-07-14 measurement of sound insulation of building elements Part 1: Application rules for specific products (Revision of ISO 140-1:1997, ISO 140-6:1998, ISO 140-8:1997, ISO 140-3:1995, ISO 140-10:1991, ISO 140-1:1997/Amd 1:2004, ISO 140-3:1995/Amd 1:2004, ISO 140-11:2005, ISO 140-16:2006) * Acoustics Laboratory 2010-07-14 measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation (Revision of ISO 140-1:1997, ISO 140-6:1998, ISO 140-8:1997, ISO 140-3:1995, ISO 140-10:1991, ISO 140-1:1997/Amd 1:2004, ISO 140-3:1995/Amd 1:2004, ISO 140-11:2005, ISO 140-16:2006) 2010-07-14 * Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation (Revision of ISO 140-1:1997, ISO 140-6:1998, ISO 140-8:1997, ISO 140-3:1995, ISO 140-10:1991, ISO 140-1:1997/Amd 1:2004, ISO 140-3:1995/Amd 1:2004, ISO 140-11:2005, ISO 140-16:2006) * Acoustics Laboratory 2010-07-14 measurement of sound insulation of building elements Part 4: Measurement procedures and requirements (Revision of ISO 140-1:1997, ISO 140-6:1998, ISO 140-8:1997, ISO 140-3:1995, ISO 140-10:1991, ISO 140-1:1997/Amd 1:2004, ISO 140-3:1995/Amd 1:2004, ISO 140-11:2005, ISO 140-16:2006) 2010-07-14 * Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment (Revision of ISO 140-1:1997, ISO 140-6:1998, ISO 140-8:1997, ISO 140-3:1995, ISO 140-10:1991, ISO 140-1:1997/Amd 1:2004, ISO 140-3:1995/Amd 1:2004, ISO 140-11:2005, ISO 140-16:2006) 2010-07-14 * Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 4: Application to junctions with at least one heavy element
TC 45
ISO/FDIS 2004
ISO/FDIS 4641
Rubber hoses and hose assemblies 2010-08-08 for water suction and discharge Specification (Revision of ISO 4641:2005)
TC 69
ISO/FDIS 21748 Guidance for the use of repeatability, 2010-07-27 reproducibility and trueness estimates in measurement uncertainty estimation (Revision of ISO/TS 21748:2004)
ISO/FDIS 10140-2
TC 71
ISO/FDIS 1920-10
TC 76
ISO/FDIS 10140-3
Transfusion, infusion and injection equipment for medical and pharmaceutical use
Infusion equipment for medical use 2010-08-14 Part 4: Infusion sets for single use, gravity feed (Revision of ISO 8536-4:2007)
ISO/FDIS 8536-4
TC 79
ISO/FDIS 2085
ISO/FDIS 10140-4
ISO/FDIS 2128
2010-08-04
ISO/FDIS 2376
2010-07-14
ISO/FDIS 10140-5
ISO/FDIS 3211
2010-08-04
ISO/FDIS 7759
ISO/FDIS 10848-4
2010-08-04 Anodizing of aluminium and its alloys Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (Revision of ISO 7759:1983) Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method (Revision of ISO 8993:1989) 2010-07-14
ISO/FDIS 8993
ISO/FDIS 10215 Anodizing of aluminium and its alloys Visual determination of image clarity of anodic oxidation coatings Chart scale method (Revision of ISO 10215:1992)
2010-07-14
TC 85
ISO/FDIS 8769
Nuclear energy
Reference sources Calibration of surface contamination monitors Alpha-, beta- and photon emitters (Revision of ISO 8769:1988, ISO 8769-2:1996) 2010-07-11
ISO 10471: * Glass-reinforced thermosetting 2003/FDAmd 1 plastics (GRP) pipes Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions Amendment 1
2010-08-05
ISO/FDIS 28218 * Radiation protection Performance criteria for radiobioassay (Revision of ISO 12790-1:2001)
2010-08-05
2010-08-05 ISO 14828: * Glass-reinforced thermosetting 2003/FDAmd 1 plastics (GRP) pipes Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor Amendment 1
TC 147
ISO/FDIS 5667-22
Water quality
* Water quality Sampling Part 22: Guidance on the design and installation of groundwater monitoring points 2010-07-19
TC 96
ISO/FDIS 4309.2
Cranes
Cranes Wire ropes Care and 2010-07-11 maintenance, inspection and discard (Revision of ISO 4309:2004, ISO 4309:2004/Amd 1:2008)
TC 98
ISO/FDIS 11349 Water quality Determination of low- 2010-08-08 volatility lipophilic substances Gravimetric method
ISO/FDIS 13822 * Bases for design of structures Assessment of existing structures (Revision of ISO 13822:2001)
TC 160
ISO/FDIS 20492-3
Glass in building
* Glass in buildings Insulating glass Part 3: Gas concentration and gas leakage 2010-07-13
TC 106
Dentistry
2010-08-04
ISO/FDIS 20492-4
TC 110
ISO/FDIS 13564-1
Industrial trucks
Powered industrial trucks Test 2010-07-27 methods for verification of visibility Part 1: Sit-on and stand-on operator trucks up to and including 10 t capacity
* Glass in buildings Insulating 2010-07-13 glass Part 4: Methods of test for the physical attributes of edge seals
TC 163
TC 114
Horology
ISO 8301:1991/ * Thermal insulation Determination FDAmd 1 of steady-state thermal resistance and related properties Heat flow meter apparatus Amendment 1
TC 164
TC 119
Powder metallurgy
ISO/FDIS 11876 Hardmetals Determination of 2010-07-14 calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders Flame atomic absorption spectrometric method
ISO/FDIS 12737 Metallic materials Determination of 2010-09-04 plane-strain fracture toughness (Revision of ISO 12737:2005)
TC 165
ISO/FDIS 20152-1
Timber structures
* Timber structures Bond performance of adhesives Part 1: Basic requirements 2010-07-11
TC 131
ISO/FDIS 19879 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections (Revision of ISO 19879:2005, ISO 19879:2005/Cor 1:2007)
2010-07-07
TC 213
TC 138
ISO/FDIS 25378 Geometrical product specifications (GPS) Characteristics and conditions Definitions
ISO 10468: * Glass-reinforced thermosetting 2010-08-05 2003/FDAmd 1 plastics (GRP) pipes Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor Amendment 1
TC 229
Nanotechnologies
ISO/FDIS 29701 * Nanotechnologies Endotoxin test 2010-07-21 on nanomaterial samples for in vitro systems Limulus amebocyte lysate (LAL) test
10
TC 231
Standards published
New International Standards published between 05 May and 07 June 2010
TC 232
ISO/FDIS 29990 Learning services for non-formal education and training Basic requirements for service providers
*Available in English only ** French version of standard previously published in English only Price group
JTC 1
ISO/IEC FDIS 9995-3
Information technology
Information technology Keyboard 2010-07-08 layouts for text and office systems Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section (Revision of ISO/IEC 9995-3:2002) 2010-07-19 ISO/PAS 30006: * Ship recycling management systems 2010 Diagrams to show the location of hazardous materials onboard ships ISO/PAS 30007: * Ships and marine technology Measures 2010 to prevent asbestos emission and exposure during ship recycling
TC 8
ISO 7547: 2002**
ISO/IEC * Information technology Coding of 14496-16:2009/ audio-visual objects Part 16: FDAM 1 Animation Framework eXtension (AFX) Amendment 1: Scalable complexity 3D mesh coding ISO/IEC FDIS 14776-151
* Information technology Small 2010-07-13 Computer System Interface (SCSI) Part 151: Serial Attached SCSI - 1.1 (SAS-1.1) * Information technology Multimedia 2010-07-12 content description interface Part 7: Conformance testing Amendment 5: Conformance testing for image signature tools * Information technology Multimedia 2010-07-22 application format (MPEG-A) Part 3: MPEG photo player application format Amendment 2: Conformance testing for photo player application format * Information technology Multimedia 2010-07-22 application format (MPEG-A) Part 9: Digital Multimedia Broadcasting application format Amendment 1: Conformance and reference software * Information technology Radio frequency identification (RFID) for item management Software system infrastructure Part 1: Architecture * Information technology JPEG XR image coding system Part 4: Conformance testing * Information technology JPEG XR image coding system Part 5: Reference software 2010-07-21
TC 10
ISO 5457:1999/ Amd 1:2010
TC 17
Steel
F
ISO 18632:2010 * Alloyed steel Determination of manganese Potentiometric and visual titration method
TC 20
ISO 11639:2010 * Aerospace Part numbering for hose assemblies ISO 16192:2010 * Space systems Experience gained in space projects (Lessons learned) Principles and guidelines ISO 23461:2010 * Space systems Programme management Non-conformance control system
TC 21
2010-07-06 ISO 6183: 2009** 2010-07-06 ISO 7240-20: 2010 ISO 7240-25: 2010
* Information technology Document 2010-07-21 description and processing languages Office Open XML File Formats Part 1: Fundamentals and Markup Language Reference Amendment 1 * Information technology Document 2010-07-21 description and processing languages Office Open XML File Formats Part 4: Transitional Migration Features Amendment 1
XZ
XZ
11
TC 22
Road vehicles
B
ISO 5546:2010
Caseins and caseinates Determination of pH (Reference method) Dried milk Determination of titratable acidity (Reference method) Milk and milk products Determination of iron content Spectrometric method (Reference method)
ISO 4113:2010 * Road vehicles Calibration fluids for diesel injection equipment ISO 4513:2010 * Road vehicles Visibility Method for establishment of eyellipses for driver's eye location ISO 8820-3: 2010 * Road vehicles Fuse-links Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) * Road vehicles Test method for the quantification of on-centre handling Part 1: Weave test
H ISO 11813:2010 Milk and milk products Determination of zinc content Flame atomic absorption spectrometric method E ISO 12081:2010 Milk Determination of calcium content Titrimetric method ISO 26462:2010 Milk Determination of lactose content Enzymatic method using difference in pH C
TC 23
ISO 11784: 1996/Amd 2: 2010 ISO 25119-1: 2010
TC 35
ISO 276:2002**
M ISO 277:2002** C
TC 39
ISO/TR 230-8: 2010
Machine tools
Test code for machine tools Part 8: Vibrations XA
TC 42
Photography
C B
ISO 1222:2010 * Photography Tripod connections ISO 1754:2010 * Photography Cameras using 35 mm film and roll film Dimensions of picture sizes
TC 27
ISO 562:2010
TC 43
B ISO 10052: 2004/Amd 1: 2010
Acoustics
Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method Amendment 1 XZ
ISO 687:2010
ISO 1171:2010 * Solid mineral fuels Determination of ash ISO 17246:2010 * Coal Proximate analysis
B C
TC 28
ISO 10307-2: 2009/Cor 1: 2010
ISO 11201:2010 * Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections ISO 11202:2010 * Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections ISO 11204:2010 * Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections ISO 15186-2: 2003** Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements
TC 33
ISO/TR 21828: 2010
Refractories
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products N
TC 34
ISO 1211:2010
Food products
Milk Determination of fat content Gravimetric method (Reference method) Cheese and processed cheese products Determination of total phosphorus content Molecular absorption spectrometric method J
ISO 2962:2010
12
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measurements at low frequencies
Petroleum and natural gas industries Drilling fluid materials Specifications and tests Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels Petroleum and natural gas industries Fixed steel offshore structures
XB
TC 44
TC 45
ISO 4081:2010 * Rubber hoses and tubing for cooling systems for internal-combustion engines Specification ISO 11089:2010 * Rubber, raw synthetic Determination of antidegradants by high-performance liquid chromatography ISO 28641:2010 Rubber compounding ingredients Organic chemicals General test methods
XF
ISO/TS 29001: * Petroleum, petrochemical and natural gas 2010 industries Sector-specific quality management systems Requirements for product and service supply organizations
TC 76
TC 51
Transfusion, infusion and injection equipment for medical and pharmaceutical use
* Injection containers and accessories Part 6: Caps made of aluminium-plastics combinations for injection vials B
ISO 18334:2010 Pallets for materials handling Quality of assembly of new wooden pallets
TC 54
ISO 8897:2010
Essential oils
Oil of juniper berry (Juniperus communis L.) D
ISO 15375:2010 * Medical infusion bottles Suspension devices for multiple use Requirements and test methods
TC 58
ISO 11363-1: 2010
Gas cylinders
Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 2: Inspection gauges E
TC 92
Fire safety
M
ISO 1716:2010 * Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) ISO 9239-1: 2010 * Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
TC 59
ISO 15686-10: 2010
Building construction
Buildings and constructed assets Service life planning Part 10: When to assess functional performance Sustainability in building construction Framework for methods of assessment of the environmental performance of construction works Part 1: Buildings R
TC 96
ISO 7752-1: 2010 ISO 7752-3: 2010
Cranes
Cranes Control layout and characteristics Part 1: General principles Cranes Control layout and characteristics Part 3: Tower cranes D
TC 102
TC 61
ISO 179-1:2010
Plastics
Plastics Determination of Charpy impact properties Part 1: Non-instrumented impact test L
TC 106
Dentistry
D
ISO 11953:2010 Dentistry Implants Clinical performance of hand torque instruments ISO 28319:2010 Dentistry Laser welding
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
Petroleum and natural gas industries Drilling fluids Laboratory testing Petroleum and natural gas industries Cements and materials for well cementing Part 6: Methods for determining the static gel strength of cement formulations Petroleum and natural gas industries Steel drill pipe XA
TC 108
ISO 13091-1: 2001/Amd 1: 2010
TC 119
XA
Powder metallurgy
C
ISO 23519:2010 * Sintered metal materials, excluding hardmetals Measurement of surface roughness
13
TC 121
TC 159
Ergonomics
T
ISO/TR * Ergonomics of human-system interaction 9241-310:2010 Part 310: Visibility, aesthetics and ergonomics of pixel defects ISO/TS 18152: * Ergonomics of human-system interaction 2010 Specification for the process assessment of human-system issues ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
TC 131
ISO 5597:2010
ISO 27407:2010 Hydraulic fluid power Marking of performance characteristics on hydraulic filters
TC 165
ISO 8970:2010
Timber structures
Timber structures Testing of joints made with mechanical fasteners Requirements for wood density * Timber structures Bending strength of Ibeams Part 1: Testing, evaluation and characterization B
TC 138
ISO 13257:2010 Thermoplastics piping systems for nonpressure applications Test method for resistance to elevated temperature cycling ISO 13260:2010 Thermoplastics piping systems for nonpressure underground drainage and sewerage Test method for resistance to combined temperature cycling and external loading ISO 13264:2010 Thermoplastics piping systems for nonpressure underground drainage and sewerage Thermoplastics fittings Test method for mechanical strength or flexibility of fabricated fittings ISO 13268:2010 Thermoplastics piping systems for nonpressure underground drainage and sewerage Thermoplastics shafts or risers for inspection chambers and manholes Determination of ring stiffness
TC 172
ISO 10342:2010 Ophthalmic instruments Eye refractometers ISO 12867:2010 Ophthalmic instruments Trial frames C
TC 178
ISO 4190-1: 2010
TC 184
ISO/TS 10303-1004: 2010
TC 146
Air quality
P ISO/TS 10303-1005: 2010
ISO 21258:2010 Stationary source emissions Determination of the mass concentration of dinitrogen monoxide (N2O) Reference method: Non-dispersive infrared method
free
TC 147
ISO 10304-1: 2007/Cor 1: 2010**
Water quality
Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate Technical Corrigendum 1 free
free
free
ISO 10872:2010 Water quality Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)
free
TC 150
ISO 7206-4: 2010
free
free
TC 156
ISO 11130:2010 Corrosion of metals and alloys Alternate immersion test in salt solution
free
14
* Industrial automation systems and integration Product data representation and exchange Part 1027: Application module: Contextual shape positioning * Industrial automation systems and integration Product data representation and exchange Part 1032: Application module: Shape property assignment * Industrial automation systems and integration Product data representation and exchange Part 1050: Application module: Dimension tolerance * Industrial automation systems and integration Product data representation and exchange Part 1051: Application module: Geometric tolerance * Industrial automation systems and integration Product data representation and exchange Part 1056: Application module: Configuration item * Industrial automation systems and integration Product data representation and exchange Part 1058: Application module: Configuration effectivity * Industrial automation systems and integration Product data representation and exchange Part 1062: Application module: Contract * Industrial automation systems and integration Product data representation and exchange Part 1068: Application module: Constructive solid geometry 3D * Industrial automation systems and integration Product data representation and exchange Part 1103: Application module: Product class * Industrial automation systems and integration Product data representation and exchange Part 1110: Application module: Surface conditions * Industrial automation systems and integration Product data representation and exchange Part 1112: Application module: Specification control * Industrial automation systems and integration Product data representation and exchange Part 1115: Application module: Part collection * Industrial automation systems and integration Product data representation and exchange Part 1116: Application module: Pdm material aspects * Industrial automation systems and integration Product data representation and exchange Part 1121: Application module: Document and version identification * Industrial automation systems and integration Product data representation and exchange Part 1126: Application module: Document properties
free
* Industrial automation systems and integration Product data representation and exchange Part 1129: Application module: External properties * Industrial automation systems and integration Product data representation and exchange Part 1133: Application module: Single part representation * Industrial automation systems and integration Product data representation and exchange Part 1140: Application module: Requirement identification and version * Industrial automation systems and integration Product data representation and exchange Part 1142: Application module: Requirement view definition relationship * Industrial automation systems and integration Product data representation and exchange Part 1164: Application module: Product as individual * Industrial automation systems and integration Product data representation and exchange Part 1231: Application module: Product data management * Industrial automation systems and integration Product data representation and exchange Part 1233: Application module: Requirement assignment * Industrial automation systems and integration Product data representation and exchange Part 1241: Application module: Information rights * Industrial automation systems and integration Product data representation and exchange Part 1251: Application module: Interface * Industrial automation systems and integration Product data representation and exchange Part 1252: Application module: Probability * Industrial automation systems and integration Product data representation and exchange Part 1255: Application module: State definition * Industrial automation systems and integration Product data representation and exchange Part 1256: Application module: State observed * Industrial automation systems and integration Product data representation and exchange Part 1258: Application module: Observation * Industrial automation systems and integration Product data representation and exchange Part 1259: Application module: Activity as realized * Industrial automation systems and integration Product data representation and exchange Part 1262: Application module: Task specification
free
free
free
free
free
free ISO/TS 10303-1142: 2010 free ISO/TS 10303-1164: 2010 free ISO/TS 10303-1231: 2010 free ISO/TS 10303-1233: 2010 free ISO/TS 10303-1241: 2010 free ISO/TS 10303-1251: 2010 free ISO/TS 10303-1252: 2010 free ISO/TS 10303-1255: 2010 free ISO/TS 10303-1256: 2010 free ISO/TS 10303-1258: 2010 free ISO/TS 10303-1259: 2010 free free
free
free
free
free
free
free
free
free
free
free
free
15
* Industrial automation systems and integration Product data representation and exchange Part 1263: Application module: Justification * Industrial automation systems and integration Product data representation and exchange Part 1264: Application module: Risk * Industrial automation systems and integration Product data representation and exchange Part 1266: Application module: Resource management * Industrial automation systems and integration Product data representation and exchange Part 1267: Application module: Required resource * Industrial automation systems and integration Product data representation and exchange Part 1268: Application module: Resource item * Industrial automation systems and integration Product data representation and exchange Part 1269: Application module: Resource as realized * Industrial automation systems and integration Product data representation and exchange Part 1270: Application module: Message * Industrial automation systems and integration Product data representation and exchange Part 1271: Application module: State characterized * Industrial automation systems and integration Product data representation and exchange Part 1274: Application module: Probability distribution * Industrial automation systems and integration Product data representation and exchange Part 1280: Application module: Required resource characterized * Industrial automation systems and integration Product data representation and exchange Part 1281: Application module: Resource item characterized * Industrial automation systems and integration Product data representation and exchange Part 1282: Application module: Resource management characterized * Industrial automation systems and integration Product data representation and exchange Part 1283: Application module: Resource as realized characterized * Industrial automation systems and integration Product data representation and exchange Part 1287: Application module: AP239 activity recording * Industrial automation systems and integration Product data representation and exchange Part 1289: Application module: AP239 management resource information
free
* Industrial automation systems and integration Product data representation and exchange Part 1290: Application module: Document management * Industrial automation systems and integration Product data representation and exchange Part 1292: Application module: AP239 product definition information * Industrial automation systems and integration Product data representation and exchange Part 1293: Application module: AP239 part definition information * Industrial automation systems and integration Product data representation and exchange Part 1297: Application module: AP239 document management * Industrial automation systems and integration Product data representation and exchange Part 1306: Application module: AP239 task specification resourced * Industrial automation systems and integration Product data representation and exchange Part 1307: Application module: AP239 work definition * Industrial automation systems and integration Product data representation and exchange Part 1308: Application module: Picture representation * Industrial automation systems and integration Product data representation and exchange Part 1311: Application module: Associative draughting elements * Industrial automation systems and integration Product data representation and exchange Part 1315: Application module: Mechanical design presentation representation with draughting * Industrial automation systems and integration Product data representation and exchange Part 1316: Application module: Camera view 3D * Industrial automation systems and integration Product data representation and exchange Part 1327: Application module: Compound shape representation * Industrial automation systems and integration Product data representation and exchange Part 1343: Application module: Product placement * Industrial automation systems and integration Product data representation and exchange Part 1345: Application module: Item definition structure * Industrial automation systems and integration Product data representation and exchange Part 1348: Application module: Requirement management * Industrial automation systems and integration Product data representation and exchange Part 1351: Application module: Catalog data information
free
free
free
free ISO/TS 10303-1293: 2010 free ISO/TS 10303-1297: 2010 free ISO/TS 10303-1306: 2010 free ISO/TS 10303-1307: 2010 free ISO/TS 10303-1308: 2010 free ISO/TS 10303-1311: 2010 free ISO/TS 10303-1315: 2010 free free free free
free
free
free
free
free
free
free
free
ISO/TS 10303-1343: 2010 free ISO/TS 10303-1345: 2010 free ISO/TS 10303-1348: 2010 free ISO/TS 10303-1351: 2010
free
free
free
free
16
* Industrial automation systems and integration Product data representation and exchange Part 1367: Application module: Textual expression representation * Industrial automation systems and integration Product data representation and exchange Part 1371: Application module: State based behaviour * Industrial automation systems and integration Product data representation and exchange Part 1396: Application module: Collection identification and version * Industrial automation systems and integration Product data representation and exchange Part 1397: Application module: Conditional effectivity * Industrial automation systems and integration Product data representation and exchange Part 1398: Application module: Identification relationship * Industrial automation systems and integration Product data representation and exchange Part 1399: Application module: Property as definition * Industrial automation systems and integration Product data representation and exchange Part 1400: Application module: Product environment definition * Industrial automation systems and integration Product data representation and exchange Part 1401: Application module: Product environment observed * Industrial automation systems and integration Product data representation and exchange Part 1402: Application module: Same as external item * Industrial automation systems and integration Product data representation and exchange Part 1403: Application module: Geometric model relationship * Industrial automation systems and integration Product data representation and exchange Part 1404: Application module: Geometric model 2D 3D relationship * Industrial automation systems and integration Product data representation and exchange Part 1433: Application module: Project management * Industrial automation systems and integration Product data representation and exchange Part 1434: Application module: Project management resource information * Industrial automation systems and integration Product data representation and exchange Part 1435: Application module: Organization structure * Industrial automation systems and integration Product data representation and exchange Part 1436: Application module: Project breakdown
free
* Industrial automation systems and integration Product data representation and exchange Part 1437: Application module: Schedule * Industrial automation systems and integration Product data representation and exchange Part 1438: Application module: Work structure * Industrial automation systems and integration Product data representation and exchange Part 1448: Application module: System behaviour * Industrial automation systems and integration Product data representation and exchange Part 1450: Application module: System structure * Industrial automation systems and integration Product data representation and exchange Part 1453: Application module: Function based behaviour * Industrial automation systems and integration Product data representation and exchange Part 1466: Application module: Program management * Industrial automation systems and integration Product data representation and exchange Part 1467: Application module: Risk management * Industrial automation systems and integration Product data representation and exchange Part 1468: Application module: External state based behaviour model * Industrial automation systems and integration Product data representation and exchange Part 1469: Application module: Foundation state definition * Industrial automation systems and integration Product data representation and exchange Part 1470: Application module: Parameter value specification * Industrial automation systems and integration Product data representation and exchange Part 1471: Application module: State based behaviour representation * Industrial automation systems and integration Product data representation and exchange Part 1472: Application module: General model parameter * Industrial automation systems and integration Product data representation and exchange Part 1473: Application module: Description assignment * Industrial automation systems and integration Product data representation and exchange Part 1474: Application module: Analysis assignment * Industrial automation systems and integration Product data representation and exchange Part 1475: Application module: Analysis characterized
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
17
* Industrial automation systems and integration Product data representation and exchange Part 1476: Application module: Analysis identification * Industrial automation systems and integration Product data representation and exchange Part 1477: Application module: System modelling * Industrial automation systems and integration Product data representation and exchange Part 1478: Application module: External functional model * Industrial automation systems and integration Product data representation and exchange Part 1479: Application module: Extended task element * Industrial automation systems and integration Product data representation and exchange Part 1480: Application module: Task element * Industrial automation systems and integration Product data representation and exchange Part 1481: Application module: Behaviour view definition * Industrial automation systems and integration Product data representation and exchange Part 1482: Application module: Behaviour identification and version * Industrial automation systems and integration Product data representation and exchange Part 1483: Application module: Behaviour description assignment * Industrial automation systems and integration Product data representation and exchange Part 1484: Application module: System identification and version * Industrial automation systems and integration Product data representation and exchange Part 1485: Application module: System view definition * Industrial automation systems and integration Product data representation and exchange Part 1486: Application module: Decision support * Industrial automation systems and integration Product data representation and exchange Part 1488: Application module: Verification and validation * Industrial automation systems and integration Product data representation and exchange Part 1489: Application module: Issue management * Industrial automation systems and integration Product data representation and exchange Part 1490: Application module: Issue * Industrial automation systems and integration Product data representation and exchange Part 1491: Application module: Expression assignment
free
* Industrial automation systems and integration Product data representation and exchange Part 1492: Application module: Function based behaviour representation * Industrial automation systems and integration Product data representation and exchange Part 1493: Application module: Disposition * Industrial automation systems and integration Product data representation and exchange Part 1509: Application module: Manifold surface * Industrial automation systems and integration Product data representation and exchange Part 1601: Application module: Altered package * Industrial automation systems and integration Product data representation and exchange Part 1603: Application module: Analytical model * Industrial automation systems and integration Product data representation and exchange Part 1613: Module d'application: Physical unit non planar design view * Industrial automation systems and integration Product data representation and exchange Part 1628: Application module: Design product data management * Industrial automation systems and integration Product data representation and exchange Part 1631: Application module: Area 2D * Industrial automation systems and integration Product data representation and exchange Part 1632: Application module: Assembly 2D shape * Industrial automation systems and integration Product data representation and exchange Part 1633: Application module: Assembly 3D shape * Industrial automation systems and integration Product data representation and exchange Part 1634: Application module: Assembly component placement requirements * Industrial automation systems and integration Product data representation and exchange Part 1635: Application module: Assembly functional interface requirement * Industrial automation systems and integration Product data representation and exchange Part 1636: Application module: Assembly module design * Industrial automation systems and integration Product data representation and exchange Part 1637: Application module: Assembly module macro definition
free
free ISO/TS 10303-1493: 2010 free ISO/TS 10303-1509: 2010 free ISO/TS 10303-1601: 2010 free ISO/TS 10303-1603: 2010 free ISO/TS 10303-1613: 2010 free ISO/TS 10303-1628: 2010 free ISO/TS 10303-1631: 2010 free ISO/TS 10303-1632: 2010 free ISO/TS 10303-1633: 2010 free ISO/TS 10303-1634: 2010 free free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
18
* Industrial automation systems and integration Product data representation and exchange Part 1638: Application module: Assembly module with cable component 2D * Industrial automation systems and integration Product data representation and exchange Part 1639: Application module: Assembly module with cable component 3D * Industrial automation systems and integration Product data representation and exchange Part 1640: Application module: Assembly module with macro component * Industrial automation systems and integration Product data representation and exchange Part 1641: Application module: Assembly module with subassembly * Industrial automation systems and integration Product data representation and exchange Part 1642: Application module: Assembly module usage view * Industrial automation systems and integration Product data representation and exchange Part 1643: Application module: Assembly module with interconnect component * Industrial automation systems and integration Product data representation and exchange Part 1644: Application module: Assembly module with cable component * Industrial automation systems and integration Product data representation and exchange Part 1645: Application module: Assembly module with packaged connector component * Industrial automation systems and integration Product data representation and exchange Part 1646: Application module: Footprint definition * Industrial automation systems and integration Product data representation and exchange Part 1647: Application module: Assembly physical interface requirement * Industrial automation systems and integration Product data representation and exchange Part 1648: Application module: Assembly physical requirement allocation * Industrial automation systems and integration Product data representation and exchange Part 1649: Application module: Assembly technology * Industrial automation systems and integration Product data representation and exchange Part 1650: Application module: Bare die
free
* Industrial automation systems and integration Product data representation and exchange Part 1651: Application module: Basic curve * Industrial automation systems and integration Product data representation and exchange Part 1652: Application module: Basic geometry * Industrial automation systems and integration Product data representation and exchange Part 1653: Application module: Cable * Industrial automation systems and integration Product data representation and exchange Part 1654: Application module: Characteristic * Industrial automation systems and integration Product data representation and exchange Part 1655: Application module: Chemical substance * Industrial automation systems and integration Product data representation and exchange Part 1656: Application module: Component grouping * Industrial automation systems and integration Product data representation and exchange Part 1657: Application module: Component feature * Industrial automation systems and integration Product data representation and exchange Part 1660: Application module: Datum difference based model * Industrial automation systems and integration Product data representation and exchange Part 1662: Application module: Design specific assignment to assembly usage view * Industrial automation systems and integration Product data representation and exchange Part 1663: Application module: Design specific assignment to interconnect usage view * Industrial automation systems and integration Product data representation and exchange Part 1664: Application module: Device marking * Industrial automation systems and integration Product data representation and exchange Part 1666: Application module: Extended geometric tolerance * Industrial automation systems and integration Product data representation and exchange Part 1667: Application module: Extended basic geometry * Industrial automation systems and integration Product data representation and exchange Part 1668: Application module: Fabrication joint * Industrial automation systems and integration Product data representation and exchange Part 1669: Application module: Fabrication requirement
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
ISO/TS 10303-1667: 2010 free ISO/TS 10303-1668: 2010 free ISO/TS 10303-1669: 2010
free
free
free
19
* Industrial automation systems and integration Product data representation and exchange Part 1670: Application module: Fabrication technology * Industrial automation systems and integration Product data representation and exchange Part 1671: Application module: Feature and connection zone * Industrial automation systems and integration Product data representation and exchange Part 1674: Application module: Functional assignment to part * Industrial automation systems and integration Product data representation and exchange Part 1679: Application module: Functional specification * Industrial automation systems and integration Product data representation and exchange Part 1682: Application module: Interconnect 2D shape * Industrial automation systems and integration Product data representation and exchange Part 1684: Application module: Interconnect module connection routing * Industrial automation systems and integration Product data representation and exchange Part 1685: Application module: Interconnect module to assembly module relationship * Industrial automation systems and integration Product data representation and exchange Part 1686: Application module: Interconnect module usage view * Industrial automation systems and integration Product data representation and exchange Part 1687: Application module: Interconnect module with macros * Industrial automation systems and integration Product data representation and exchange Part 1688: Application module: Interconnect non planar shape * Industrial automation systems and integration Product data representation and exchange Part 1689: Application module: Interconnect physical requirement allocation * Industrial automation systems and integration Product data representation and exchange Part 1690: Application module: Interconnect placement requirements * Industrial automation systems and integration Product data representation and exchange Part 1691: Application module: Interface component * Industrial automation systems and integration Product data representation and exchange Part 1692: Application module: Land * Industrial automation systems and integration Product data representation and exchange Part 1693: Application module: Layered 2D shape
free
* Industrial automation systems and integration Product data representation and exchange Part 1694: Application module: Layered 3D shape * Industrial automation systems and integration Product data representation and exchange Part 1695: Application module: Layered interconnect module 2D design * Industrial automation systems and integration Product data representation and exchange Part 1696: Application module: Layered interconnect module 3D design * Industrial automation systems and integration Product data representation and exchange Part 1698: Application module: Layered interconnect module design * Industrial automation systems and integration Product data representation and exchange Part 1700: Application module: Layered interconnect module with printed component design * Industrial automation systems and integration Product data representation and exchange Part 1701: Application module: Layout macro definition * Industrial automation systems and integration Product data representation and exchange Part 1703: Application module: Model parameter * Industrial automation systems and integration Product data representation and exchange Part 1704: Application module: Network functional design view * Industrial automation systems and integration Product data representation and exchange Part 1705: Application module: Functional usage view * Industrial automation systems and integration Product data representation and exchange Part 1706: Application module: Non feature shape element * Industrial automation systems and integration Product data representation and exchange Part 1707: Application module: Package * Industrial automation systems and integration Product data representation and exchange Part 1708: Application module: Packaged connector model * Industrial automation systems and integration Product data representation and exchange Part 1709: Application module: Packaged part white box model * Industrial automation systems and integration Product data representation and exchange Part 1710: Application module: Packaged part black box model * Industrial automation systems and integration Product data representation and exchange Part 1711: Application module: Part external reference
free
free
free
free ISO/TS 10303-1696: 2010 free ISO/TS 10303-1698: 2010 free free
free
free
free
free
free
ISO/TS 10303-1703: 2010 free ISO/TS 10303-1704: 2010 free ISO/TS 10303-1705: 2010 free ISO/TS 10303-1706: 2010 free ISO/TS 10303-1707: 2010 free ISO/TS 10303-1708: 2010
free
free
free
free
free
free
free
free
free
free
free
20
* Industrial automation systems and integration Product data representation and exchange Part 1712: Application module: Part feature function * Industrial automation systems and integration Product data representation and exchange Part 1713: Application module: Part feature grouping * Industrial automation systems and integration Product data representation and exchange Part 1714: Application module: Part feature location * Industrial automation systems and integration Product data representation and exchange Part 1716: Application module: Layered interconnect complex template * Industrial automation systems and integration Product data representation and exchange Part 1717: Application module: Part template 3D shape * Industrial automation systems and integration Product data representation and exchange Part 1718: Application module: Layered interconnect simple template * Industrial automation systems and integration Product data representation and exchange Part 1719: Application module: Part template non planar shape * Industrial automation systems and integration Product data representation and exchange Part 1720: Application module: Part template shape with parameters * Industrial automation systems and integration Product data representation and exchange Part 1721: Application module: Physical component feature * Industrial automation systems and integration Product data representation and exchange Part 1722: Application module: Part template * Industrial automation systems and integration Product data representation and exchange Part 1723: Application module: Physical node requirement to implementing component allocation * Industrial automation systems and integration Product data representation and exchange Part 1724: Application module: Physical unit 2D design view * Industrial automation systems and integration Product data representation and exchange Part 1725: Application module: Physical unit 3D design view * Industrial automation systems and integration Product data representation and exchange Part 1726: Application module: Physical unit 2D shape * Industrial automation systems and integration Product data representation and exchange Part 1727: Application module: Physical unit 3D shape
free
* Industrial automation systems and integration Product data representation and exchange Part 1728: Application module: Physical unit design view * Industrial automation systems and integration Product data representation and exchange Part 1729: Application module: Physical unit interconnect definition * Industrial automation systems and integration Product data representation and exchange Part 1730: Application module: Physical unit shape with parameters * Industrial automation systems and integration Product data representation and exchange Part 1731: Application module: Constructive solid geometry 2D * Industrial automation systems and integration Product data representation and exchange Part 1732: Application module: Physical unit usage view * Industrial automation systems and integration Product data representation and exchange Part 1734: Application module: Pre defined datum symbol * Industrial automation systems and integration Product data representation and exchange Part 1735: Application module: Pre defined datum 2D symbol * Industrial automation systems and integration Product data representation and exchange Part 1736: Application module: Pre defined datum 3D symbol * Industrial automation systems and integration Product data representation and exchange Part 1737: Application module: Printed physical layout template * Industrial automation systems and integration Product data representation and exchange Part 1739: Application module: Production rule * Industrial automation systems and integration Product data representation and exchange Part 1740: Application module: Requirement decomposition * Industrial automation systems and integration Product data representation and exchange Part 1741: Application module: Sequential laminate assembly design * Industrial automation systems and integration Product data representation and exchange Part 1744: Application module: Discrete shield * Industrial automation systems and integration Product data representation and exchange Part 1746: Application module: Software * Industrial automation systems and integration Product data representation and exchange Part 1748: Application module: Stratum non planar shape
free
free
free
free ISO/TS 10303-1730: 2010 free ISO/TS 10303-1731: 2010 free ISO/TS 10303-1732: 2010 free ISO/TS 10303-1734: 2010 free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
free
21
* Industrial automation systems and integration Product data representation and exchange Part 1752: Application module: Thermal network definition * Industrial automation systems and integration Product data representation and exchange Part 1754: Application module: Via component * Industrial automation systems and integration Product data representation and exchange Part 1755: Application module: Physical connectivity definition * Industrial automation systems and integration Product data representation and exchange Part 1761: Application module: Information product * Industrial automation systems and integration Product data representation and exchange Part 1763: Application module: Integral shield * Industrial automation systems and integration Product data representation and exchange Part 1768: Application module: Composite material aspects * Industrial automation systems and integration Product data representation and exchange Part 1770: Application module: Part and zone laminate tables * Industrial automation systems and integration Product data representation and exchange Part 1771: Application module: Stock material * Industrial automation systems and integration Product data representation and exchange Part 1773: Application module: Basic data representation * Industrial automation systems and integration Product data representation and exchange Part 1778: Application module: External library * Industrial automation systems and integration Product data representation and exchange Part 1782: Application module: Qualified measure * Industrial automation systems and integration Product data representation and exchange Part 1784: Application module: External analysis representation * Industrial automation systems and integration Product data representation and exchange Part 1785: Application module: Analysis representation
free
ISO/TS * Industrial automation systems and 10303-433:2010 integration Product data representation and exchange Part 433: Application module: AP233 systems engineering ISO/TS * Industrial automation systems and 10303-439:2010 integration Product data representation and exchange Part 439: Application module: AP239 product life cycle support
free
free
free
free
TC 188
ISO 12402-2: 2006/Amd 1: 2010
Small craft
Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements Amendment 1 Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements Amendment 1 Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements Amendment 1 Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements Amendment 1 Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods Amendment 1 XZ
free ISO 12402-3: 2006/Amd 1: 2010 free ISO 12402-4: 2006/Amd 1: 2010 ISO 12402-5: 2006/Amd 1: 2010 ISO 12402-6: 2006/Amd 1: 2010 XZ
XZ
XZ
free
XZ
free
TC 194
free ISO 10993-1: 2009/Cor 1: 2010 free ISO 10993-13: 2010
free
TC 197
Hydrogen technologies
N
TC 202
Microbeam analysis
N
free
ISO 25498:2010 * Microbeam analysis Analytical electron microscopy Selected-area electron diffraction analysis using a transmission electron microscope ISO 29301:2010 * Microbeam analysis Analytical transmission electron microscopy Methods for calibrating image magnification by using reference materials having periodic structures
free
TC 204
free ISO/TS 14907-1:2010
ISO/TS * Industrial automation systems and 10303-403:2010 integration Product data representation and exchange Part 403: Application module: AP203 configuration controlled 3D design of mechanical parts and assemblies ISO/TS * Industrial automation systems and 10303-410:2010 integration Product data representation and exchange Part 410: Application module: AP210 electronic assembly interconnect and packaging design
free
TC 214
ISO 16368:2010 Mobile elevating work platforms Design, calculations, safety requirements and test methods
22
TC 215
Health informatics
F
ISO/TS 22789: * Health informatics Conceptual framework 2010 for patient findings and problems in terminologies ISO/TS 29585: * Health informatics Deployment of a 2010 clinical data warehouse
ISO/IEC * Information technology Coding of audio14496-26:2010 visual objects Part 26: Audio conformance ISO/IEC 14888-3:2006/ Amd 1:2010 * Information technology Security techniques Digital signatures with appendix Part 3: Discrete logarithm based mechanisms Amendment 1: Elliptic Curve Russian Digital Signature Algorithm, Schnorr Digital Signature Algorithm, Elliptic Curve Schnorr Digital Signature Algorithm, and Elliptic Curve Full Schnorr Digital Signature Algorithm
XF
TC 217
Cosmetics
E
ISO 29621:2010 Cosmetics Microbiology Guidelines for the risk assessment and identification of microbiologically low-risk products
TC 226
ISO/IEC 15421: * Information technology Automatic 2010 identification and data capture techniques Bar code master test specifications ISO/IEC 15909-1:2004/ Amd 1:2010 * Systems and software engineering Highlevel Petri nets Part 1: Concepts, definitions and graphical notation Amendment 1: Symmetric Nets
ISO 12315:2010 * Aluminium oxide primarily used for production of aluminium Method for calculating the Al2O3 content of smeltergrade alumina
XZ
JTC 1
Information technology
free
ISO/IEC 9075-1: * Information technology Database 2008/Cor 1: languages SQL Part 1: Framework 2010 (SQL/Framework) Technical Corrigendum 1 ISO/IEC 9075-10:2008/ Cor 1:2010 * Information technology Database languages SQL Part 10: Object Language Bindings (SQL/OLB) Technical Corrigendum 1 * Information technology Database languages SQL Part 13: SQL Routines and Types Using the Java TM Programming Language (SQL/JRT) Technical Corrigendum 1 * Information technology Database languages SQL Part 14: XML-Related Specifications (SQL/XML) Technical Corrigendum 1
ISO/IEC 18051: * Information technology 2010 Telecommunications and information exchange between systems Services for Computer Supported Telecommunications Applications (CSTA) Phase III ISO/IEC 18056: * Information technology 2010 Telecommunications and information exchange between systems XML protocol for Computer Supported Telecommunications Applications (CSTA) Phase III ISO/IEC * Information technology Multimedia 23000-10:2009/ application format (MPEG-A) Part 10: Amd 1:2010 Video surveillance application format Amendment 1: Conformance and reference software ISO/IEC 29500-3:2008/ Cor 1:2010 * Information technology Document description and processing languages Office Open XML File Formats Part 3: Markup Compatibility and Extensibility Technical Corrigendum 1 * Information technology Smart transducer interface for sensors and actuators Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formats * Information technology Smart transducer interface for sensors and actuators Part 1: Network Capable Application Processor (NCAP) information model * Information technology Smart transducer interface for sensors and actuators Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formats * Information technology Smart transducer interface for sensors and actuators Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats
XJ
free
XG
free
XZ
free
free
ISO/IEC 9075-2: * Information technology Database 2008/Cor 1: languages SQL Part 2: Foundation 2010 (SQL/Foundation) Technical Corrigendum 1 ISO/IEC 9075-4: * Information technology Database 2008/Cor 1: languages SQL Part 4: Persistent Stored Modules (SQL/PSM) Technical 2010 Corrigendum 1 ISO/IEC 9075-9: * Information technology Database 2008/Cor 1: languages SQL Part 9: Management of 2010 External Data (SQL/MED) Technical Corrigendum 1 ISO/IEC 9798-3: * Information technology Security 1998/Amd 1: techniques Entity authentication Part 3: 2010 Mechanisms using digital signature techniques Amendment 1: . ISO/IEC 10373-2:2006/ Cor 1:2010 ISO/IEC 14496-1:2010 * Identification cards Test methods Part 2: Cards with magnetic stripes Technical Corrigendum 1 * Information technology Coding of audiovisual objects Part 1: Systems
XH
free
ISO/IEC/IEEE 21451-1:2010
XH
XZ
ISO/IEC/IEEE 21451-2:2010
XA
free
ISO/IEC/IEEE 21451-4:2010
XK
XB
ISO/IEC * Information technology Coding of audio14496-15:2010 visual objects Part 15: Advanced Video Coding (AVC) file format
23
TC 61
Plastics
Standards confirmed
The following International Standards are confirmed for a five year period:
TC 67
TC 1
ISO 965-1:1998 ISO 1502:1996
Screw threads
(reconfirmed) (reconfirmed) ISO 15138:2007
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
TC 108
TC 22
ISO 3469:1989 ISO 5740:1982 ISO 5898:1997 ISO 6255:1997 ISO 7397-1:1993 ISO 7397-2:1993 ISO 10997:1996 ISO 17373:2005
Road vehicles
(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
TC 119
ISO 2738:1999 ISO 3312:1987 ISO 4022:1987 ISO 5754:1978
Powder metallurgy
(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
TC 23
TC 123
ISO 4381:2000 ISO 4383:2000 ISO 4384-1:2000
Plain bearings
(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
TC 28
ISO 3735:1999
TC 29
ISO 839-1:2006 ISO 2236:1991 ISO 2780:2006
Small tools
TC 127
ISO 3164:1995
Earth-moving machinery
(reconfirmed)
(reconfirmed)
TC 138
ISO 8483:2003 ISO 8533:2003
TC 34
ISO 7540:2006
Food products
TC 38
ISO 1833-4:2006
Textiles
TC 46
ISO 214:1976 ISO 233-3:1999 ISO 843:1997 ISO 2145:1978 ISO 3166-1:2006 ISO 3166-3:1999 ISO 3901:2001 ISO 7154:1983 ISO 8777:1993 ISO 9706:1994 ISO 9984:1996 ISO 11108:1996 ISO 11798:1999 ISO 12083:1994
TC 145
ISO 17724:2003
Graphical symbols
TC 155
ISO 7528:1989 ISO 7529:1989 ISO 11435:2005
TC 162
ISO 8272:1985
TC 188
ISO 4566:1992 ISO 6185-1:2001 ISO 6185-2:2001
Small craft
(reconfirmed)
24
ISO 7840:2004 ISO 8099:2000 ISO 8469:2006 ISO 8665:2006 ISO 8666:2002 ISO 8845:1994 ISO 8847:2004 ISO 8848:1990 ISO 8849:2003 ISO 9093-2:2002 ISO 9097:1991 ISO 9650-1:2005 ISO 9650-2:2005 ISO 9775:1990 ISO 10087:2006 ISO 10134:2003 ISO 10240:2004 ISO 11105:1997 ISO 11192:2005 ISO 11592:2001 (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
ISO/IEC Guide 23: (reconfirmed) 1982 ISO/IEC Guide 28: 2004 ISO/IEC Guide 53: 2005 ISO/IEC Guide 67: 2004
JTC 1
ISO/IEC 11770-4: 2006
Information technology
Standards withdrawn
Period from 05 May to 07 June 2010
TC 43
ISO/TR 4870:1991
Acoustics
TC 58
ISO 10920:1997
Gas cylinders
(replaced by ISO 11363-1:2010) (replaced by ISO 11363-1:2010) (replaced by ISO 11363-2:2010) (replaced by ISO 11363-2:2010)
ISO 11812:2001 ISO 11116-1:1999 ISO 12215-2:2002 ISO 11116-2:1999 ISO 12215-3:2002 ISO 11191:1997 ISO 12215-4:2002 ISO 12216:2002 ISO 12402-1:2005 ISO 12402-10:2006 ISO 12402-8:2006 ISO 13342:1995 ISO 13590:2003 ISO 13591:1997 ISO 13592:1998 ISO 13929:2001 ISO 14227:2001 ISO 14945:2004 ISO 14946:2001 ISO 15083:2003 ISO 15084:2003 ISO 15085:2003 ISO 15584:2001 ISO 15652:2003 ISO 16147:2002 (update at 07 June 2010) Meetings called for the month of June are not repeated in this edition. * Information definite but meeting not yet formally convened ** Provisional (reconfirmed) (reconfirmed) (reconfirmed)
TC 59
ISO/TS 21931-1: 2006
Building construction
(replaced by ISO 21931-1:2010)
TC 159
ISO/PAS 18152: 2003
Ergonomics
(replaced by ISO/TS 18152:2010)
Meeting calendar
July 2010
1 Ozzano (Italy) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Drilling and completion fluids, and well cements
TC 219
ISO 24336:2005
Floor coverings
1 Washington, D.C (USA) TC 67/SC 3
CASCO
25
1-2
Albuquerque (USA)
TC 86/SC 1
Refrigeration and airconditioning/Safety and environmental requirements for refrigerating systems Textiles/Tests for coloured textiles and colorants Textiles/Cleansing, finishing and water resistance tests Welding and allied processes/Welding consumables
August 2010
2-6 Washington, D.C (USA) TC 11 Boilers and pressure vessels
5-7
Paris (France)
TC 38/SC 1
TC 37 and SC Terminology and other language and content resources TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
7-9
Paris (France)
TC 38/SC 2
23-27 Italy
8-9
Istanbul (Turkey)
TC 44/SC 3
30
Mexico (Mexico)
Milan (Italy)
TC 22/SC 23 Road vehicles/Mopeds TC 207/SC 7 Environmental management/Green house gas management and related activities TC 207 Environmental management Project Committee: Project Management
August-September 2010
30-2 Europe ** TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery
September 2010
2-6 4-5 Beijing (China) Tokyo (Japan) * TC 218 TC 209 Timber Cleanrooms and associated controlled environments
TC 236
TC 207/SC 2 Environmental management/ Environmental auditing and related environmental investigations TC 207/SC 3 Environmental management/ Environmental labelling TC 207/SC 4 Environmental management/ Environmental performance evaluation TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment
6-12 USA
** JTC 1/SC 36 Information technology/ Information technology for learning, education and training TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems Steel Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
Paris (France)
7-8 7-8
TC 17 TC 79/SC 2
8 15 Mexico (Mexico) * TC 207/SC 5 Environmental management/Life cycle assessment 8-9 16 Mexico (Mexico) * TC 207/SC 1 Environmental management/ Environmental management systems JTC 1/SC 37 Information technology/ Biometrics TC 239 Project Committee: Network services billing Aircraft and space vehicles/Aerospace fastener systems Sizing systems and designations for clothes 10 29-30 Delft (Netherlands) 31 Geneva (Switzerland) * TC 34/SC 12 Food products/Sensory analysis JTC 1/SC 29 Information technology/ Coding of audio, picture, multimedia and hypermedia information 10 9
Beijing (China)
** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas Dimensional and geometrical product specifications and verification
Paris (France)
TC 213
TC 20/SC 4
Beijing (China)
TC 17/SC 15 Steel/Railway rails and their fasteners TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete JTC 1/SC 34 Information technology/ Document description and processing languages TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)
Beijing (China)
TC 133
Tokyo (Japan)
Beijing (China)
26
10
Paris (France)
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting systems using foam and powder Technical Management Board
TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machines ** TC 198 Sterilization of health care products General Assembly
TMB
JTC 1/SC 22 Information technology/ Programming languages, their environments and system software interfaces * TC 61 and SC Plastics
21-23 New Delhi (India) * 13-17 Bangkok (Thailand) 13-17 Orlando (USA) 13-17 Orlando (USA) 21-23 Boulder (USA) *
GA
TC 164/SC 5 Mechanical testing of metals/Fatigue testing TC 29/SC 8 Small tools/Tools for pressing and moulding
** TC 150
22
TC 150/SC 4 Implants for surgery/Bone and joint replacements * TC 165 Timber structures
TC 164/SC 2 Mechanical testing of metals/Ductility testing ** JTC 2 Joint Project Committee Energy efficiency and renewable energy sources - Common terminology
22-24 Unknown TC 150/SC 5 Implants for surgery/ Osteosynthesis and spinal devices TC 54 Essential oils 23
Lahaina, Hawaii ** TC 146/SC 1 Air quality/Stationary (USA) source emissions Lahaina, Hawaii * (USA) Lahaina, Hawaii * (USA) Lahaina, Hawaii (USA) Lahaina, Hawaii * (USA) Lahaina, Hawaii (USA) Boulder (USA) TC 146/SC 2 Air quality/Workplace atmospheres TC 146/SC 3 Air quality/Ambient atmospheres TC 146/SC 4 Air quality/General aspects TC 146/SC 5 Air quality/Meteorology
TC 59/SC 8
23
TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions TC 123/SC 3 Plain bearings/ Dimensions, tolerances and construction details * GA General Assembly
23
23
15
Ulm (Germany)
23
23
23 TC 123/SC 5 Plain bearings/Quality analysis and assurance 24 16 Ulm (Germany) TC 123/SC 6 Plain bearings/Terms and common items TC 150/SC 7 Implants for surgery/ Tissue-engineered medical products TC 123 * COUNCIL Plain bearings Council 28
16
Florida (USA)
17 18
TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments TC 83/SC 4 Sports and recreational equipment/Snowsports equipment
Vienna (Austria) *
TC 34/SC 17 Food products/ Management systems for food safety * TC 164/SC 4 Mechanical testing of metals/Toughness testing Fracture (F), Pendulum (P), Tear (T)
28
TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components TC 193/SC 3 Natural gas/Upstream area
30
Houston (USA)
27
30
Beijing (China)
TC 201/SC 1 Surface chemical analysis/Terminology TC 201/SC 2 Surface chemical analysis/General procedures TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy
Beijing (China)
30
Beijing (China)
TC 201/SC 7 Surface chemical analysis/X-ray photoelectron spectroscopy TC 250 Project committee: Sustainability in event management
30
Beijing (China)
Beijing (China)
September-October 2010
27-1 London (United * Kingdom) JTC 1/SC 6 Information technology/ Telecommunications and information exchange between systems 2 Beijing (China) *
TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry TC 201/SC 8 Surface chemical analysis/Glow discharge spectroscopy TAG 8 Building
JTC 1/SC 38 Information technology/ Distributed application platforms and services (DAPS) TC 44/SC 9 Welding and allied processes/Health and safety
4-5
Geneva (Switzerland)
4-8 4-8
TC 190
Soil quality
TC 190/SC 1 Soil quality/Evaluation of criteria, terminology and codification TC 190/SC 4 Soil quality/Biological methods Cosmetics
4-8 27-1 London (United Kingdom) TC 108 Mechanical vibration, shock and condition monitoring
Paris (France)
4-8 5
** TC 217
TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures TC 172/SC 7 Optics and photonics/ Ophthalmic optics and instruments TC 106 Dentistry
TC 173/SC 2 Assistive products for persons with disability/ Classification and terminology * JTC 1/SC 17 Information technology/ Cards and personal identification TC 28/SC 2 Petroleum products and lubricants/Measurement of petroleum and related products
6-8
Takamatsu (Japan)
Denver (USA)
27-2 Rio de Janeiro (Brazil) 30-1 Busan (Korea, Republic of) 30-2 Beijing (China)
Munich (Germany)
TC 60 and SC Gears
TC 201
10-11 Berlin (Germany) ** JTC 1/SC 27 Information technology/IT Security techniques 11-13 Johannesburg (South Africa) ** TC 59/SC 2 Building construction/ Terminology and harmonization of languages Building construction/ Functional/user requirements and performance in building construction
October 2010
1 Paris (France) ** TC 79/SC 6 Light metals and their alloys/Wrought aluminium and aluminium alloys Natural gas
** TC 59/SC 3
1 1
* *
TC 193
TC 193/SC 1 Natural gas/Analysis of natural gas TC 201/SC 3 Surface chemical analysis/Data management and treatment TC 201/SC 4 Surface chemical analysis/Depth profiling 11-13 Johannesburg (South Africa)
** TC 59/SC 15 Building construction/ Performance criteria for single family attached and detached dwellings ** TC 59/SC 17 Building construction/ Sustainability in building construction TC 94/SC 13 Personal safety Protective clothing and equipment/Protective clothing
Beijing (China)
Beijing (China)
Beijing (China)
28