Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 419 views

    Student Projects Sldwrks

    Uploaded by

    Prithvi Harve
    In this student project, the student will create the components of a Drill Press Vice assembly and assemble them together. They will also generate drawing views of the assembled vice and a bill of materials (BOM) with balloons added to the drawing views. Dimensions for the individual components are provided in several figures.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Student Projects Sldwrks

    Uploaded by

    Prithvi Harve
    419 views6 pages
    In this student project, the student will create the components of a Drill Press Vice assembly and assemble them together. They will also generate drawing views of the assembled vice and a bill of materials (BOM) with balloons added to the drawing views. Dimensions for the individual components are provided in several figures.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    In this student project, the student will create the components of a Drill Press Vice assembly and assemble them together. They will also generate drawing views of the assembled vice and a bill of materials (BOM) with balloons added to the drawing views. Dimensions for the individual components are provided in several figures.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    419 views6 pages

    Student Projects Sldwrks

    Uploaded by

    Prithvi Harve
    In this student project, the student will create the components of a Drill Press Vice assembly and assemble them together. They will also generate drawing views of the assembled vice and a bill of materials (BOM) with balloons added to the drawing views. Dimensions for the individual components are provided in several figures.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6
    At a glance
    Powered by AI
    The document discusses creating assemblies for a Drill Press Vice and Shock using SolidWorks. Dimensions and drawings are provided for each component.

    The components included in the Drill Press Vice assembly are the base, movable jaw, clamp screw, handle stop, and safety handle.

    The components included in the Shock assembly are the bracket, pivot, u-support, bushing, washer, hexagonal bolt, self-locking nut, and castle nut.

    Student Project 1

    In this project you will create the components of the Drill Press Vice assembly and assemble them together. You will also generate the drawing views of the Drill Press Vice assembly and then generate the BOM and add balloons to the drawing view. The Drill Press Vice is shown in Figure 1. The drawing views of the Drill Press Vice are shown in Figure 2. The dimensions of the components of the assembly are shown in Figures 3 through 8.

    Figure 1 Drill Press Vice assembly

    Figure 2 Drawing views of the Drill Press Vice assembly

    SolidWorks for Designers

    Figure 3 Dimensions of the Clamp Screw, the Handle Stop, and the Clamp Screw Handle

    Figure 4 Dimensions of the Jaw Face, the Cap Screw, and the Safety Handle

    Figure 5 Top view of the Base

    Figure 6 Top view of the Movable Jaw

    Figure 7 Front view of the Base

    Figure 8 Front view of the Movable Jaw

    Student Projects

    Student Project 2
    In this project you will create all the components of the Shock assembly and then assemble them as shown in Figure 9. Also create an exploded state of the assembly and create the explode line sketch as shown in Figure 10. The BOM is shown in Figure 11. The dimensions of the components are shown in Figures 12 through 19.

    Figure 9 The Shock assembly

    Figure 10 The exploded state of the Shock assembly

    SolidWorks for Designers

    Figure 11 The Bill Of Material for the Shock assembly

    Figure 12 Dimensions for Bracket

    Figure 13 Dimensions for Pivot

    Student Projects

    Figure 14 Dimensions for U-Support

    Figure 15 Dimensions for Bushing

    Figure 16 Dimensions for Self-locking nut

    Figure 17 Dimensions for Washer

    Figure 18 Dimensions for Hexagonal bolt

    SolidWorks for Designers

    Figure 19 Dimensions for Castle nut

    You might also like