EMV v4.1 Book 4 Other Interfaces

EMV
Integrated Circuit Card Specifications for Payment Systems
Book 4
Cardholder, Attendant, and Acquirer Interface Requirements
Version 4.1 May 2004
EMV
Integrated Circuit Card Specifications for Payment Systems
Book 4
Cardholder, Attendant, and Acquirer Interface Requirements
Version 4.1 May 2004
1994-2004 EMVCo, LLC (EMVCo). All rights reserved. Any and all uses of the EMV Specifications (Materials) shall be permitted only pursuant to the terms and conditions of the license agreement between the user and EMVCo found at http://www.emvco.com/specifications.cfm.
EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements
Page ii
May 2004
Revision Log - Version 4.1

The following changes have been made to Book 4 since the publication of Version 4.0. Incorporated changes described in the following Specification Updates: Specification Update Bulletin no. 1: Correction to Tag Value for Issuer Application Data Specification Update Bulletin no. 6: Modification to Combined Dynamic Data Authentication and Application Cryptogram Generation Specification Update Bulletin no. 9: Modification to Combined Dynamic Data Authentication Specification Update Bulletin no. 10: Addition of flag to indicate support of No CVM Required cardholder verification method Specification Update Bulletin no. 15: Changes to Key Colours and Keypad Layout Specification Update Bulletin no. 17: Additional Terminal Capabilities Cash Deposit Transaction Type Specification Update Bulletin no. 20: Combined DDA/AC Generation Specification Update Bulletin no. 30: Terminal Security Requirements for PIN & Amount entry Specification Update Bulletin no. 31: Support requirements for Character Sets Specification Update Bulletin no. 33: Clarification of Terminate Updated in support of the following Application Notes: Application Note no. 7: Data Element Format Convention Definition Application Note no.13: TVR and TSI Bit Settings Following Script Processing Application Note no. 16: Authorisation Request Repeats Clarified terminology for offline data authentication methods.
May 2004
Page iii
Revision Log
Updated general sections: Increased consistency of section 1, Scope, across the four Books. Merged contents of the following sections, so that they contain complete information for all four Books: section 2, Normative References section 3, Definitions section 4, Abbreviations, Notations, Conventions, and Terminology Minor editorial clarifications, including those described in the following Specification Updates: Specification Updates Bulletin no. 5: Update to Reference for ISO 639 Specification Updates Bulletin no. 8: Editorial Changes to EMV 2000 Version 2.0
Page iv
May 2004
Contents
Part I - General 1 Scope 1.1 1.2 1.3 1.4 2 3 4 Changes in Version 4.1 Structure Underlying Standards Audience 3 3 3 5 5 7 11 21 21 29 31 33
Normative References Definitions Abbreviations, Notations, Conventions, and Terminology 4.1 4.2 4.3 4.4 Abbreviations Notations Data Element Format Conventions Terminology
Part II - General Requirements 5 Terminal Types and Capabilities 5.1 5.2 5.3 6 Terminal Types Terminal Capabilities Terminal Configurations 37 37 38 39 43 43 43 43 44 45 45 46 48 48 49 50 50 51
Functional Requirements 6.1 Application Independent ICC to Terminal Interface Requirements 6.2 Security and Key Management 6.3 Application Specification 6.3.1 Initiate Application Processing 6.3.2 Offline Data Authentication 6.3.3 Processing Restrictions 6.3.4 Cardholder Verification Processing 6.3.5 Terminal Risk Management 6.3.6 Terminal Action Analysis 6.3.7 Card Action Analysis 6.3.8 Online Processing 6.3.9 Issuer-to-Card Script Processing 6.4 Conditions for Support of Functions
May 2004
Page v
6.5 Other Functional Requirements 6.5.1 Amount Entry and Management 6.5.2 Voice Referrals 6.5.3 Transaction Forced Online 6.5.4 Transaction Forced Acceptance 6.5.5 Transaction Sequence Counter 6.5.6 Unpredictable Number 6.6 Card Reading 6.6.1 IC Reader 6.6.2 Exception Handling 6.7 Date Management 6.7.1 Data Authentication 6.7.2 Processing Restrictions 6.7.3 Date Management 7 Physical Characteristics 7.1 Keypad 7.1.1 Command Keys 7.1.2 PIN Pad 7.2 Display 7.3 Memory Protection 7.4 Clock 7.5 Printer 7.6 Magnetic Stripe Reader
52 52 53 54 54 55 55 55 56 56 57 57 57 57 59 59 60 61 62 62 62 63 63
Part III - Software Architecture 8 Terminal Software Architecture 8.1 Environmental Changes 8.2 Application Libraries 8.3 Application Program Interface 8.4 Interpreter 8.4.1 Concept 8.4.2 Virtual Machine 8.4.3 Kernel 8.4.4 Application Code Portability 8.5 Plugs and Sockets 67 67 68 69 70 70 71 71 71 72
Page vi
May 2004
9 10
Software Management Data Management Application Independent Data Application Dependent Data 10.1 10.2
75 77 78 79
Part IV - Cardholder, Attendant, and Acquirer Interface 11 11.1 11.2 11.3 11.4 12 Cardholder and Attendant Interface Language Selection Standard Messages Application Selection Receipt Acquirer Interface 85 85 86 89 90 91 91 93 95 97 98 99 101 102 104 106 106 107 108 109 109
12.1 Message Content 12.1.1 Authorisation Request 12.1.2 Financial Transaction Request 12.1.3 Authorisation or Financial Transaction Response 12.1.4 Financial Transaction Confirmation 12.1.5 Batch Data Capture 12.1.6 Reconciliation 12.1.7 Online Advice 12.1.8 Reversal 12.2 Exception Handling 12.2.1 Unable to Go Online 12.2.2 Downgraded Authorisation 12.2.3 Authorisation Response Incidents 12.2.4 Script Incidents 12.2.5 Advice Incidents Part V - Annexes Annex A A1 A2 A3 A4 A5 A6 Coding of Terminal Data Elements Terminal Type Terminal Capabilities Additional Terminal Capabilities CVM Results Issuer Script Results Authorisation Response Code
113 113 114 116 119 119 120
May 2004
Page vii
Annex B Annex C Annex D
Common Character Set Example Data Element Conversion Informative Terminal Guidelines
121 123 127 127 127 127 127 128 128 128 131 132 133 134
D1 Terminal Usage D2 Power Supply D2.1 External Power Supply D2.2 Battery Requirements D3 Keypad D4 Display D5 Informative References Annex E E1 E2 E3 Examples of Terminals Example 1 - POS Terminal or Electronic Cash Register Example 2 - ATM Example 3 - Vending Machine
Index
135
Page viii
May 2004
Tables
Table 1: Terms Describing Terminal Types Table 2: Card Action Analysis Table 3: Key Types Table 4: Command Keys Table 5: Command Key Colours Table 6: Application Dependent Data Elements Table 7: Standard Messages Table 8: ICC-specific Authorisation Request Data Elements Table 9: Existing Authorisation Request Data Elements Table 10: ICC-specific Financial Transaction Request Data Elements Table 11: Existing Financial Transaction Request Data Elements Table 12: ICC-specific Authorisation or Financial Transaction Response Data Elements Table 13: Existing Authorisation or Financial Transaction Response Data Elements Table 14: ICC-specific Financial Transaction Confirmation Data Elements Table 15: Existing Financial Transaction Confirmation Data Elements Table 16: ICC-specific Batch Data Capture Data Elements Table 17: Existing Batch Data Capture Data Elements Table 18: Existing Reconciliation Data Elements Table 19: ICC-specific Online Advice Data Elements Table 20: Existing Online Advice Data Elements Table 21: ICC-specific Reversal Data Elements Table 22: Existing Reversal Data Elements Annexes Table 23: Table 24: Table 25: Table 26: Table 27: Table 28: Table 29: Table 30: Table 31: Table 32: Table 33: Table 34: Terminal Type Terminal Capabilities Byte 1 - Card Data Input Capability Terminal Capabilities Byte 2 - CVM Capability Terminal Capabilities Byte 3 - Security Capability Addl Term. Capabilities Byte 1 - Transaction Type Capability Addl Term. Capabilities Byte 2 - Transaction Type Capability Addl Term. Capabilities Byte 3 - Terminal Data Input Capability Addl Term. Capabilities Byte 4 - Term. Data Output Capability Addl Term. Capabilities Byte 4 - Term. Data Output Capability CVM Results Issuer Script Results Authorisation Response Codes 113 114 115 115 116 117 117 118 118 119 119 120 121 123 37 49 59 60 60 79 87 93 94 95 96 97 97 98 98 99 100 101 102 103 104 105
Table 35: Common Character Set Table 36: Data Element Conversion
May 2004
Page ix
Table 37: Example of POS Terminal or Electronic Cash Register Table 38: Example of ATM Table 39: Example of Vending Machine
132 133 134
Page x
May 2004
Figures
Figure 1: Figure 2: Figure 3: Figure 4: Figure 5: Figure 6: Example of an Attended Terminal Example of a Merchant Host Example of a Cardholder-Controlled Terminal PIN Pad Layout Terminal Software Socket/Plug Relationship 39 40 41 61 68 73
May 2004
Page xi
Page xii
May 2004
Part I General
May 2004
Page 1
Page 2
May 2004
Scope
This document, the Integrated Circuit Card Specifications for Payment Systems Book 4, Cardholder, Attendant, and Acquirer Interface Requirements for Payment Systems, defines the mandatory, recommended, and optional terminal requirements necessary to support the acceptance of integrated circuit cards (ICCs) in accordance with the other documents of the Integrated Circuit Card Specifications for Payment Systems, all available on http://www.emvco.com: Book 1 - Application Independent ICC to Terminal Interface Requirements Book 2 - Security and Key Management Book 3 - Application Specification
1.1 Changes in Version 4.1

This release incorporates all relevant Specification Update Bulletins, Application Notes, amendments, etc. published up to the date of this release. The Revision Log at the beginning of the Book provides additional detail about changes to this specification.
1.2 Structure
Book 4 consists of the following parts: Part I Part II Part III Part IV Part V General General Requirements Software Architecture Cardholder, Attendant, and Acquirer Interface Annexes
Part I includes this introduction, as well as data applicable to all Books: normative references, definitions, abbreviations, notations, data element format convention, and terminology. Part II addresses: Functional requirements, such as those emerging from the other Books of the Integrated Circuit Card Specifications for Payment Systems General physical characteristics
May 2004
Page 3
1 Scope 1.2 Structure
Part III addresses software architecture including software and data management. Part IV discusses: Cardholder and attendant interface Acquirer interface Part V discusses the coding of terminal data elements, lists the common character set, provides an example data element conversion, includes informative terminal guidelines, and provides examples of the physical and functional characteristics of terminals. The Book also includes a revision log and an index. This specification applies to all terminals operating in attended or unattended environments, having offline or online capabilities, and supporting transaction types such as purchase of goods, services, and cash. Terminals include but are not limited to automated teller machines (ATMs), branch terminals, cardholder-activated terminals, electronic cash registers, personal computers, and point of service (POS) terminals. This specification defines the requirements necessary to support the implementation of ICCs. These requirements are in addition to those already defined by individual payment systems and acquirers for terminals that accept magnetic stripe cards. ICC and magnetic stripe acceptance capability may co-exist in the same terminal. It is recognised that different terminal implementations exist depending on business environment and intended usage. This specification defines requirements for those features and functions that are applicable according to the particular operating environment of the terminal. This specification: Does not cover application-specific terminal requirements unique to individual payment systems and those functions not required to support interchange. Does not address cardholder or merchant operating procedures, which are established by individual payment systems. Does not provide sufficient detail to be used as a specification for terminal procurement. Individual payment systems and acquirers will define complementary requirements applicable to different situations that will provide more detailed specifications applicable to terminal implementations.
Page 4
May 2004
1 Scope 1.3 Underlying Standards
1.3 Underlying Standards

This specification is based on the ISO/IEC 7816 series of standards and should be read in conjunction with those standards. However, if any of the provisions or definitions in this specification differ from those standards, the provisions herein shall take precedence.
1.4 Audience
This specification is intended for use by manufacturers of ICCs and terminals, system designers in payment systems, and financial institution staff responsible for implementing financial applications in ICCs.
May 2004
Page 5
1 Scope 1.4 Audience
Page 6
May 2004
Normative References
The following standards contain provisions that are referenced in these specifications. The latest version shall apply unless a publication date is explicitly stated. FIPS 180-2 ISO 639-1 Secure Hash Standard Codes for the representation of names of languages Part 1: Alpha-2 Code
Note: This standard is updated continuously by ISO. Additions/changes to ISO 639-1:1988: Codes for the Representation of Names of Languages are available on: http://lcweb.loc.gov/standards/iso639-2/codechanges.html
ISO 3166 ISO 4217 ISO/IEC 7811-1 ISO/IEC 7811-3
Codes for the representation of names of countries and their subdivisions Codes for the representation of currencies and funds Identification cards Recording technique Part 1: Embossing Identification cards Recording technique Part 3: Location of embossed characters on ID-1 cards Identification cards Financial transaction cards Identification cards Integrated circuit(s) cards with contacts Part 1: Physical characteristics Information technology Identification cards Integrated circuit(s) cards with contacts Part 2: Dimensions and location of contacts Information technology Identification Cards Integrated circuit(s) cards with contacts Part 3: Electronic signals and transmission protocols
ISO/IEC 7813 ISO/IEC 7816-1 ISO/IEC 7816-2
ISO/IEC 7816-3
May 2004
Page 7
2 Normative References
ISO/IEC 7816-4
Information technology Identification cards Integrated circuit(s) cards with contacts Part 4: Interindustry commands for interchange Identification cards Integrated circuit(s) cards with contacts Part 5: Numbering system and registration procedure for application identifiers Identification cards Integrated circuit(s) cards with contacts Part 6: Interindustry data elements Bank card originated messages Interchange message specifications Content for financial transactions Financial transaction card originated messages Interchange message specifications Information technology ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) Information processing 8-bit single-byte coded graphic character sets Banking Banking telecommunication messages Bank identifier codes Banking PIN management and security Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems Banking PIN management and security Part 3: Requirements for offline PIN handling in ATM and POS systems Information technology Security techniques Digital signature schemes giving message recovery Part 2: Integer factorization based mechanisms Information technology Security techniques Message Authentication Codes Part 1: Mechanisms using a block cipher
ISO/IEC 7816-5
ISO/IEC 7816-6
ISO 8583:1987
ISO 8583:1993 ISO/IEC 8825-1
ISO/IEC 8859 ISO 9362 ISO 9564-1
ISO 9564-3
ISO/IEC 9796-2:2002
ISO/IEC 9797-1
Page 8
May 2004
ISO/IEC 10116 ISO/IEC 10118-3 ISO/IEC 10373 ISO 11568-2:1994 ISO 13491-1
Information technology Security techniques Modes of operation for an n-bit block cipher Information technology Security techniques Hash-functions Part 3: Dedicated hash-functions Identification cards Test methods Banking Key management (retail) Part 2: Key management techniques for symmetric ciphers Banking Secure cryptographic devices (retail) Part 1: Concepts, requirements and evaluation methods Banking and related financial services International bank account number (IBAN) Banking Requirements for message authentication using symmetric techniques
ISO 13616 ISO 16609
May 2004
Page 9
Page 10
May 2004
Definitions
The following terms are used in one or more books of these specifications. Accelerated Revocation Application Application Authentication Cryptogram Application Authorisation Referral Application Cryptogram A key revocation performed on a date sooner than the published key expiry date. The application protocol between the card and the terminal and its related set of data. An Application Cryptogram generated when declining a transaction An Application Cryptogram generated when requesting an authorisation referral A cryptogram generated by the card in response to a GENERATE AC command. See also: Authorisation Request Cryptogram Authorisation Response Cryptogram Asymmetric Cryptographic Technique Application Authentication Cryptogram Application Authorisation Referral Authorisation Request Cryptogram Transaction Certificate
An Application Cryptogram generated when requesting online authorisation A cryptogram generated by the issuer in response to an Authorisation Request Cryptogram. A cryptographic technique that uses two related transformations, a public transformation (defined by the public key) and a private transformation (defined by the private key). The two transformations have the property that, given the public transformation, it is computationally infeasible to derive the private transformation. The provision of assurance of the claimed identity of an entity or of data origin.
Authentication
May 2004
Page 11
3 Definitions
Block
A succession of characters comprising two or three fields defined as prologue field, information field, and epilogue field. 8 bits. A payment card as defined by a payment system. The public key and identity of an entity together with some other information, rendered unforgeable by signing with the private key of the certification authority which issued that certificate. Trusted third party that establishes a proof that links a public key and other relevant information to its owner. Enciphered information. The reset of the ICC that occurs when the supply voltage (VCC) and other signals to the ICC are raised from the inactive state and the reset (RST) signal is applied. A form of offline dynamic data authentication.
Byte Card Certificate
Certification Authority Ciphertext Cold Reset
Combined DDA/Application Cryptogram Generation Command
A message sent by the terminal to the ICC that initiates an action and solicits a response from the ICC. The breaching of secrecy or security. Two elements are concatenated by appending the bytes from the second element to the end of the first. Bytes from each element are represented in the resulting string in the same sequence in which they were presented to the terminal by the ICC, that is, most significant byte first. Within each byte bits are ordered from most significant bit to least significant. A list of elements or objects may be concatenated by concatenating the first pair to form a new element, using that as the first element to concatenate with the next in the list, and so on.
Compromise Concatenation
Page 12
May 2004
3 Definitions
Contact
A conducting element ensuring galvanic continuity between integrated circuit(s) and external interfacing equipment. Result of a cryptographic operation. An algorithm that transforms data in order to hide or reveal its information content. The property that data has not been altered or destroyed in an unauthorised manner. The deactivation sequence defined in section 6.1.5 of Book 1. The reversal of a corresponding encipherment. An asymmetric cryptographic transformation of data that allows the recipient of the data to prove the origin and integrity of the data, and protect the sender and the recipient of the data against forgery by third parties, and the sender against forgery by the recipient. A form of offline dynamic data authentication Characters raised in relief from the front surface of a card. The reversible transformation of data by a cryptographic algorithm to produce ciphertext. The final field of a block. It contains the error detection code (EDC) byte(s). Binary addition with no carry, giving the following values: 0+0=0 0+1=1 1+0=1 1+1=0
Cryptogram Cryptographic Algorithm Data Integrity Deactivation Sequence Decipherment Digital Signature
Dynamic Data Authentication Embossing Encipherment Epilogue Field Exclusive-OR
Financial Transaction
The act between a cardholder and a merchant or acquirer that results in the exchange of goods or services against payment.
May 2004
Page 13
3 Definitions
Function
A process accomplished by one or more commands and resultant actions that are used to perform all or part of a transaction. The minimum time between the trailing edge of the parity bit of a character and the leading edge of the start bit of the following character sent in the same direction. A function that maps strings of bits to fixedlength strings of bits, satisfying the following two properties: It is computationally infeasible to find for a given output an input which maps to this output. It is computationally infeasible to find for a given input a second input that maps to the same output. Additionally, if the hash function is required to be collisionresistant, it must also satisfy the following property: It is computationally infeasible to find any two distinct inputs that map to the same output.
Guardtime
Hash Function
Hash Result Inactive
The string of bits that is the output of a hash function. The supply voltage (VCC) and other signals to the ICC are in the inactive state when they are at a potential of 0.4 V or less with respect to ground (GND). The subassembly embedded into the ICC comprising the IC, the IC carrier, bonding wires, and contacts. Electronic component(s) designed to perform processing and/or memory functions. A card into which one or more integrated circuits are inserted to perform processing and memory functions. That part of a terminal into which the ICC is inserted, including such mechanical and electrical devices as may be considered part of it.
Integrated Circuit Module Integrated Circuit(s) Integrated Circuit(s) Card Interface Device
Page 14
May 2004
3 Definitions
Issuer Action Code
Any of the following, which reflect the issuer-selected action to be taken upon analysis of the TVR: Issuer Action Code - Default Issuer Action Code - Denial Issuer Action Code - Online
Kernel
The set of functions required to be present on every terminal implementing a specific interpreter. The kernel contains device drivers, interface routines, security and control functions, and the software for translating from the virtual machine language to the language used by the real machine. In other words, the kernel is the implementation of the virtual machine on a specific real machine. A sequence of symbols that controls the operation of a cryptographic transformation. The date after which a signature made with a particular key is no longer valid. Issuer certificates signed by the key must expire on or before this date. Keys may be removed from terminals after this date has passed. The process of generating, distributing, and beginning use of a key pair. All phases of key management, from planning and generation, through revocation, destruction, and archiving. The simultaneous revocation of a key and introduction of a key to replaced the revoked one. The key management process of withdrawing a key from service and dealing with the legacy of its use. Key revocation can be as scheduled or accelerated. The date after which no legitimate cards still in use should contain certificates signed by this key, and therefore the date after which this key can be deleted from terminals. For a planned revocation the Key Revocation Date is the same as the key expiry date. The process of removing a key from service as part of its revocation.
Key Key Expiry Date
Key Introduction Key Life Cycle
Key Replacement Key Revocation
Key Revocation Date
Key Withdrawal
May 2004
Page 15
3 Definitions
Keypad
Arrangement of numeric, command, and, where required, function and/or alphanumeric keys laid out in a specific manner. A set of highlevel software functions with a published interface, providing general support for terminal programs and/or applications. The compromise of a key through application of improved cryptanalytic techniques, increases in computing power, or combination of the two. The stripe containing magnetically encoded information. A string of bytes sent by the terminal to the card or vice versa, excluding transmissioncontrol characters. A symmetric cryptographic transformation of data that protects the sender and the recipient of the data against forgery by third parties. The four most significant or least significant bits of a byte. Appending extra bits to either side of a data string. Concatenation of file identifiers without delimitation. The set of logical conditions established within the ICC when a payment system application conforming to this specification has been selected, or when a Directory Definition File (DDF) used for payment system application purposes has been selected. The compromise of a key resulting from the fact that it has not been securely guarded, or a hardware security module has been stolen or accessed by unauthorised persons. Arrangement of numeric and command keys to be used for personal identification number (PIN) entry. Unenciphered information. A key revocation performed as scheduled by the published key expiry date.
Library
Logical Compromise
Magnetic Stripe Message Message Authentication Code Nibble Padding Path Payment System Environment
Physical Compromise
PIN Pad Plaintext Planned Revocation
Page 16
May 2004
3 Definitions
Potential Compromise
A condition where cryptanalytic techniques and/or computing power has advanced to the point that compromise of a key of a certain length is feasible or even likely. That key of an entitys asymmetric key pair that should only be used by that entity. In the case of a digital signature scheme, the private key defines the signature function. The first field of a block. It contains subfields for node address (NAD), protocol control byte (PCB), and length (LEN). That key of an entitys asymmetric key pair that can be made public. In the case of a digital signature scheme, the public key defines the verification function. The public key information of an entity signed by the certification authority and thereby rendered unforgeable. A message returned by the ICC to the terminal after the processing of a command message received by the ICC. A command or a string of commands transmitted by the issuer to the terminal for the purpose of being sent serially to the ICC as commands. A key used with symmetric cryptographic techniques and usable only by a set of specified entities. The difference between the high and low voltages of a signal. Abnormalities occurring on a signal during normal operation such as undershoot/overshoot, electrical noise, ripple, spikes, crosstalk, etc. Random perturbations introduced from external sources are beyond the scope of this specification. An execution vector defined at a particular point in an application and assigned a unique number for reference.
Private Key
Prologue Field
Public Key
Public Key Certificate Response
Script
Secret Key Signal Amplitude Signal Perturbations
Socket
May 2004
Page 17
3 Definitions
State H
Voltage high on a signal line. May indicate a logic one or logic zero depending on the logic convention used with the ICC. Voltage low on a signal line. May indicate a logic one or logic zero depending on the logic convention used with the ICC. Offline static data authentication A cryptographic technique that uses the same secret key for both the originators and recipients transformation. Without knowledge of the secret key, it is computationally infeasible to compute either the originators or the recipients transformation. Characteroriented asynchronous half duplex transmission protocol. Blockoriented asynchronous half duplex transmission protocol. Value field of a constructed data object, defined to give a logical grouping of data objects. The device used in conjunction with the ICC at the point of transaction to perform a financial transaction. The terminal incorporates the interface device and may also include other components and interfaces such as host communications.
State L
Static Data Authentication Symmetric Cryptographic Technique
T=0 T=1 Template Terminal
Terminal Action Code Any of the following, which reflect the acquirer-selected action to be taken upon analysis of the TVR: Terminal Action Code - Default Terminal Action Code - Denial Terminal Action Code - Online Terminate Card Session End the card session by deactivating the IFD contacts according to section 6.1.5 of Book 1, and displaying a message indicating that the ICC cannot be used to complete the transaction Stop the current application and deactivate the card.
Terminate Transaction
Page 18
May 2004
3 Definitions
Transaction
An action taken by a terminal at the users request. For a POS terminal, a transaction might be payment for goods, etc. A transaction selects among one or more applications as part of its processing flow. An Application Cryptogram generated when accepting a transaction A theoretical microprocessor architecture that forms the basis for writing application programs in a specific interpreter software implementation. The reset that occurs when the reset (RST) signal is applied to the ICC while the clock (CLK) and supply voltage (VCC) lines are maintained in their active state.
Transaction Certificate Virtual Machine
Warm Reset
May 2004
Page 19
3 Definitions
Page 20
May 2004
Abbreviations, Notations, Conventions, and Terminology

Abbreviations
Microampere Micrometre Microsecond Alphabetic (see section 4.3, Data Element Format Conventions) Application Authentication Cryptogram Application Authorisation Referral Application Cryptogram Acknowledgment Application Definition File Application Elementary File Application File Locator Application Identifier Application Interchange Profile Alphanumeric (see section 4.3) Alphanumeric Special (see section 4.3) Application Protocol Data Unit Application Program Interface Authorisation Response Code Authorisation Response Cryptogram Authorisation Request Cryptogram Application Selection Indicator
4.1
A m s a AAC AAR AC ACK ADF AEF AFL AID AIP an ans APDU API ARC ARPC ARQC ASI
May 2004
Page 21
4 Abbreviations, Notations, Conventions, and Terminology EMV 4.1 Book 4 4.1 Abbreviations Cardholder, Attendant, and Acquirer Interface Requirements
ASN ATC ATM ATR AUC b BCD BER BIC BGT BWI BWT C CAD C-APDU CBC CCD CCI CDA CDOL CID CIN CLA CLK cn CPU CSU
Abstract Syntax Notation Application Transaction Counter Automated Teller Machine Answer to Reset Application Usage Control Binary (see section 4.3) Binary Coded Decimal Basic Encoding Rules (defined in ISO/IEC 88251) Bank Identifier Code Block Guardtime Block Waiting Time Integer Block Waiting Time Celsius or Centigrade Card Accepting Device Command APDU Cipher Block Chaining Common Core Definitions Common Core Identifier Combined DDA/Application Cryptogram Generation Card Risk Management Data Object List Cryptogram Information Data Input Capacitance Class Byte of the Command Message Clock Compressed Numeric (see section 4.3) Central Processing Unit Card Status Update
Page 22
May 2004
EMV 4.1 Book 4 4 Abbreviations, Notations, Conventions, and Terminology Cardholder, Attendant, and Acquirer 4.1 Abbreviations Interface Requirements
C-TPDU CV CVM CVR CV Rule CWI CWT D DAD DC DDA DDF DDOL DES DF DIR DOL ECB EDC EF EN etu f FC FCI FIPS GND
Command TPDU Cryptogram Version Cardholder Verification Method Card Verification Results Cardholder Verification Rule Character Waiting Time Integer Character Waiting Time Bit Rate Adjustment Factor Destination Node Address Direct Current Dynamic Data Authentication Directory Definition File Dynamic Data Authentication Data Object List Data Encryption Standard Dedicated File Directory Data Object List Electronic Code Book Error Detection Code Elementary File European Norm Elementary Time Unit Frequency Format Code File Control Information Federal Information Processing Standard Ground
May 2004
Page 23
GP Hex HHMMSS I/O IAC IAD IBAN I-block IC ICC ICC IEC IFD IFS IFSC IFSD IFSI IIN IK INF INS IOH IOL ISO IV KM KS
Grandparent key for session key generation Hexadecimal Hours, Minutes, Seconds Input/Output Issuer Action Code (Denial, Default, Online) Issuer Application Data International Bank Account Number Information Block Integrated Circuit Integrated Circuit(s) Card Current drawn from VCC International Electrotechnical Commission Interface Device Information Field Size Information Field Size for the ICC Information Field Size for the Terminal Information Field Size Integer Issuer Identification Number Intermediate Key for session key generation Information Field Instruction Byte of Command Message High Level Output Current Low Level Output Current International Organization for Standardization Initial Vector for session key generation Master Key Session Key
Page 24
May 2004
L l.s. Lc LCOL LDD Le LEN Licc
Length Least Significant Exact Length of Data Sent by the TAL in a Case 3 or 4 Command Lower Consecutive Offline Limit Length of the ICC Dynamic Data Maximum Length of Data Expected by the TAL in Response to a Case 2 or 4 Command Length Exact Length of Data Available or Remaining in the ICC (as Determined by the ICC) to be Returned in Response to the Case 2 or 4 Command Received by the ICC Length of Response Data Field Longitudinal Redundancy Check Mandatory Milliohm Most Significant Meters per Second Milliampere Message Authentication Code Maximum Master File Megahertz Minimum ICC Master Key for session key generation Millimetre Month, Day Month, Year Newton
Lr LRC M m m.s. m/s mA MAC max. MF MHz min. MK mm MMDD MMYY N
May 2004
Page 25
n NAD NAK nAs NCA NF NI NIC NPE ns O O/S P P1 P2 P3 PAN PC PCA PCB PDOL pF PI PIC PIN PIX POS
Numeric (see section 4.3) Node Address Negative Acknowledgment Nanoamperesecond Length of the Certification Authority Public Key Modulus Norme Franaise Length of the Issuer Public Key Modulus Length of the ICC Public Key Modulus Length of the ICC PIN Encipherment Public Key Modulus Nanosecond Optional Operating System Parent key for session key generation Parameter 1 Parameter 2 Parameter 3 Primary Account Number Personal Computer Certification Authority Public Key Protocol Control Byte Processing Options Data Object List Picofarad Issuer Public Key ICC Public Key Personal Identification Number Proprietary Application Identifier Extension Point of Service
Page 26
May 2004
pos. PSE PTS R-APDU R-block RFU RID RSA RST SAD S-block SCA SDA SFI SHA-1 SI SIC SK SW1 SW2 TAC TAL TC TCK TDOL tF TLV
Position Payment System Environment Protocol Type Selection Response APDU Receive Ready Block Reserved for Future Use Registered Application Provider Identifier Rivest, Shamir, Adleman Algorithm Reset Source Node Address Supervisory Block Certification Authority Private Key Static Data Authentication Short File Identifier Secure Hash Algorithm 1 Issuer Private Key ICC Private Key Session Key for session key generation Status Byte One Status Byte Two Terminal Action Code(s) (Default, Denial, Online) Terminal Application Layer Transaction Certificate Check Character Transaction Certificate Data Object List Fall Time Between 90% and 10% of Signal Amplitude Tag Length Value
May 2004
Page 27
TPDU tR TS TSI TTL TVR UCOL UL V var. VCC VCC VIH VIL VOH VOL VPP VPP WI WTX WWT YYMM YYMMDD
Transport Protocol Data Unit Rise Time Between 10% and 90% of Signal Amplitude Initial Character Transaction Status Information Terminal Transport Layer Terminal Verification Results Upper Consecutive Offline Limit Underwriters Laboratories Incorporated Volt Variable (see section 4.3) Voltage Measured on VCC Contact Supply Voltage High Level Input Voltage Low Level Input Voltage High Level Output Voltage Low Level Output Voltage Programming Voltage Voltage Measured on VPP contact Waiting Time Integer Waiting Time Extension Work Waiting Time Year, Month Year, Month, Day
Page 28
May 2004
EMV 4.1 Book 4 4 Abbreviations, Notations, Conventions, and Terminology Cardholder, Attendant, and Acquirer 4.2 Notations Interface Requirements
4.2
xx A := B A=B
Notations
16 hexadecimal characters Any value A is assigned the value of B Value of A is equal to the value of B Integers A and B are congruent modulo the integer n, that is, there exists an integer d such that (A B) = dn
0 to 9 and 'A' to 'F'
A B mod n
A mod n
The reduction of the integer A modulo the integer n, that is, the unique integer r, 0 r < n, for which there exists an integer d such that A = dn + r
A/n
The integer division of A by n, that is, the unique integer d for which there exists an integer r, 0 r < n, such that A = dn + r
b-ary representation (x0, x1, . . . , xn1) of X
For a positive integer b, the representation of a nonnegative integer X in the base b: X = x0bn1 + x1bn2 + . . . + xn2b + xn1 for the unique integers x0, x1, , x(n1) and n satisfying n > 0 and 0 xi < b for i=0 to n1
Y := ALG(K)[X] X = ALG1(K)[Y] Y := Sign (SK)[X]
Encipherment of a data block X with a block cipher as specified in Annex A1 of Book 2, using a secret key K Decipherment of a data block Y with a block cipher as specified in Annex A1 of Book 2, using a secret key K The signing of a data block X with an asymmetric reversible algorithm as specified in Annex A2 of Book 2, using the private key SK
May 2004
Page 29
4 Abbreviations, Notations, Conventions, and Terminology EMV 4.1 Book 4 4.2 Notations Cardholder, Attendant, and Acquirer Interface Requirements
X = Recover(PK)[Y]
The recovery of the data block X with an asymmetric reversible algorithm as specified in Annex A2 of Book 2, using the public key PK The concatenation of an n-bit number A and an m-bit number B, which is defined as C = 2m A + B. Applies to a sequence of bits, bytes, or digits and used interchangeably with the term most significant. If C = (A || B) as above, then A is the leftmost n bits of C. Applies to a sequence of bits, bytes, or digits and used interchangeably with the term least significant. If C = (A || B) as above, then B is the rightmost m bits of C. Hashing of a message MSG of arbitrary length using a 160-bit hash function The symbol '' denotes bit-wise exclusive-OR and is defined as follows: XY The bit-wise exclusive-OR of the data blocks X and Y. If one data block is shorter than the other, then it is first padded to the left with sufficient binary zeros to make it the same length as the other.
C := (A || B) Leftmost
Rightmost
H := Hash[MSG] XY
Page 30
May 2004
EMV 4.1 Book 4 4 Abbreviations, Notations, Conventions, and Terminology Cardholder, Attendant, and Acquirer 4.3 Data Element Format Conventions Interface Requirements
4.3
a
Data Element Format Conventions

Alphabetic data elements contain a single character per byte. The permitted characters are alphabetic only (a to z and A to Z, upper and lower case). Alphanumeric data elements contain a single character per byte. The permitted characters are alphabetic (a to z and A to Z, upper and lower case) and numeric (0 to 9). Alphanumeric Special data elements contain a single character per byte. The permitted characters and their coding are shown in the Common Character Set table in Annex B. There is one exception: The permitted characters for Application Preferred Name are the non-control characters defined in the ISO/IEC 8859 part designated in the Issuer Code Table Index associated with the Application Preferred Name.
The EMV specifications use the following data element formats:
an
ans
These data elements consist of either unsigned binary numbers or bit combinations that are defined elsewhere in the specification. Binary example: The Application Transaction Counter (ATC) is defined as b with a length of two bytes. An ATC value of 19 is stored as Hex '00 13'. Bit combination example: Processing Options Data Object List (PDOL) is defined as b with the format shown in Book 3, section 5.4.
cn
Compressed numeric data elements consist of two numeric digits (having values in the range Hex '0''9') per byte. These data elements are left justified and padded with trailing hexadecimal 'F's. Example: The Application Primary Account Number (PAN) is defined as cn with a length of up to ten bytes. A value of 1234567890123 may be stored in the Application PAN as Hex '12 34 56 78 90 12 3F FF' with a length of 8.
Numeric data elements consist of two numeric digits (having values in the range Hex '0''9') per byte. These digits are right justified and padded with leading hexadecimal zeroes. Other specifications sometimes refer to this data format as Binary Coded Decimal (BCD) or unsigned packed. Example: Amount, Authorised (Numeric) is defined as n 12 with a length of six bytes. A value of 12345 is stored in Amount, Authorised (Numeric) as Hex '00 00 00 01 23 45'.
May 2004
Page 31
4 Abbreviations, Notations, Conventions, and Terminology EMV 4.1 Book 4 4.3 Data Element Format Conventions Cardholder, Attendant, and Acquirer Interface Requirements
var.
Variable data elements are variable length and may contain any bit combination. Additional information on the formats of specific variable data elements is available elsewhere.
Page 32
May 2004
EMV 4.1 Book 4 4 Abbreviations, Notations, Conventions, and Terminology Cardholder, Attendant, and Acquirer 4.4 Terminology Interface Requirements
4.4
Terminology
Not defined in this specification and/or outside the scope of this specification Denotes a mandatory requirement Denotes a recommendation
proprietary shall should
May 2004
Page 33
4 Abbreviations, Notations, Conventions, and Terminology EMV 4.1 Book 4 4.4 Terminology Cardholder, Attendant, and Acquirer Interface Requirements
Page 34
May 2004
Part II
General Requirements
May 2004
Page 35
Page 36
May 2004
5
5.1
Terminal Types and Capabilities

Terminal Types
As described in section 1, this specification addresses a broad spectrum of terminals. For the purpose of this specification, terminals are categorised by the following: Environment: Attended or unattended Communication: Online or offline Operational control: Financial institution, merchant, or cardholder Table 1 defines the terms used to describe terminal types. Term Attended Definition An attendant (an agent of the merchant or of the acquirer) is present at the point of transaction and participates in the transaction by entering transaction-related data. The transaction occurs face to face. The cardholder conducts the transaction at the point of transaction without the participation of an attendant (agent of the merchant or of the acquirer). The transaction does not occur face to face. The transaction can only be completed online in real time, such as transmitting an authorisation message. Depending upon transaction characteristics, the transaction can be completed offline by the terminal or online in real time. It is equivalent to online with offline capability. The transaction can only be completed offline by the terminal. Identifies the entity responsible for the operation of the terminal. This does not necessarily equate to the actual owner of the terminal. Table 1: Terms Describing Terminal Types Within this specification, online reflects online communication to acquirer (or its agent). The acquirer is assumed to be capable of communicating to the issuer (or its agent).
Unattended
Online only Offline with online capability Offline only Operational control
May 2004
Page 37
5 Terminal Types and Capabilities 5.2 Terminal Capabilities
The type of terminal shall be indicated in Terminal Type. The coding of Terminal Type using the three categories is shown in Annex A.
5.2
Terminal Capabilities
For the purpose of this specification, terminal capabilities are described in Terminal Capabilities and Additional Terminal Capabilities. The following categories shall be indicated in Terminal Capabilities: Card data input capability - Indicates all the methods supported by the terminal for entering the information from the card into the terminal. Cardholder Verification Method (CVM) capability - Indicates all the methods supported by the terminal for verifying the identity of the cardholder at the terminal. Security capability - Indicates all the methods supported by the terminal for authenticating the card at the terminal and whether or not the terminal has the ability to capture a card. The following categories shall be indicated in Additional Terminal Capabilities: Transaction type capability - Indicates all the types of transactions supported by the terminal. Terminal data input capability - Indicates all the methods supported by the terminal for entering transaction-related data into the terminal. Terminal data output capability - Indicates the ability of the terminal to print or display messages and the character set code table(s) referencing the part(s) of ISO/IEC 8859 supported by the terminal. The coding of Terminal Capabilities and Additional Terminal Capabilities using these categories is shown in Annex A.
Page 38
May 2004
5 Terminal Types and Capabilities 5.3 Terminal Configurations
5.3
Terminal Configurations
Terminal capabilities and device components vary depending on the intended usage and physical environment. A limited set of configuration examples follow. Figure 1 illustrates an example of an attended terminal where the integrated circuit (IC) interface device (IFD) and PIN pad are integrated but separate from the POS device (such as for an electronic fund transfer terminal or an electronic cash register).
Terminal
1 4 ICC 7 C
2 5 8 0 IFD
3 6 9 E POS Device
Mag. stripe card
C = Cancel E = Enter
Figure 1: Example of an Attended Terminal
May 2004
Page 39
Figure 2 illustrates an example of merchant host concentrating devices, which may be of various types and capabilities.
Merchant Host POS Device

Figure 2: Example of a Merchant Host Within this specification a merchant host to which is connected a cluster of POS devices shall be considered, in its totality, as a terminal regardless of the distribution of functions between the host and POS devices. (See section 10 for terminal data management requirements.)
Page 40
May 2004
Figure 3 illustrates an example of a cardholder-controlled terminal that is connected via a public network to a merchant or acquirer host.
1 4 7 C
2 5 8 0
3 6 9 E Public Network
Merchant Host
Cardholder Terminal
C = Cancel E = Enter
Acquirer Host
Figure 3: Example of a Cardholder-Controlled Terminal
May 2004
Page 41
Page 42
May 2004
Functional Requirements
This Book does not replicate the other Books of the Integrated Circuit Card Specifications for Payment Systems but describes the implementation issues and the impact of those Books on the terminal. This section uses standard messages described in section 11.2 to illustrate the appropriate message displays for the transaction events described below. The usage of Authorisation Response Code, CVM Results, and Issuer Script Results is specified in this section. See Annex A for additional information on coding.
6.1 Application Independent ICC to Terminal Interface Requirements

The terminal shall comply with all Parts of Book 1. It shall support all data elements and commands subject to the conditions described in section 6.3.
6.2
Security and Key Management
The terminal shall comply with all Parts of Book 2. It shall support all data elements and commands subject to the conditions described in section 6.3.
6.3 Application Specification

The terminal shall comply with all Parts of Book 3. It shall support all functions subject to the conditions described in this section. Sections 6.3.1 to 6.3.9 expand upon the terminal functions described in Book 3.
May 2004
Page 43
6 Functional Requirements 6.3 Application Specification
6.3.1
Initiate Application Processing
When the Processing Options Data Object List (PDOL) includes an amount field (either Amount, Authorised or Amount, Other), a merchant-controlled terminal (Terminal Type = '2x') shall provide the amount at this point in transaction processing. If the amount is not yet available, the terminal shall obtain the amount and should display the ENTER AMOUNT message. As described in Book 3, if the card returns SW1 SW2 = '6985' in response to the GET PROCESSING OPTIONS command, indicating that the transaction cannot be performed with this application, then the terminal should display the NOT ACCEPTED message and shall return to application selection. The terminal shall not allow that application to be selected again for this card session as defined in Book 1.
Page 44
May 2004
6.3.2
Offline Data Authentication
An online-only terminal supporting no form of offline data authentication as indicated in Terminal Capabilities shall set to 1 the Offline data authentication was not performed bit in the Terminal Verification Results (TVR). (For details, see Annex C of Book 3.) All other terminals shall be capable of performing offline static data authentication (SDA) as described in Book 3. They may also be capable of performing offline dynamic data authentication (DDA and/or CDA) as described in Book 3. After a GENERATE AC response is received, if CDA failed as shown in section 6.6.2 of Book 2, the terminal shall set the CDA failed bit in the TVR to 1. If CDA fails in conjunction with the first GENERATE AC: If the Cryptogram Information Data (CID) bit indicates that the card has returned a TC, the terminal shall decline the transaction. If the CID bit indicates that the card has returned an ARQC, the terminal shall complete the transaction processing by performing an immediate second GENERATE AC command requesting an AAC. If CDA fails in conjunction with the second GENERATE AC, the terminal shall decline the transaction. If as part of dynamic signature verification the CID was retrieved from the ICC Dynamic Data (as recovered from the Signed Dynamic Application Data), then it is this value that shall be used to determine the cryptogram type. Otherwise the cleartext CID in the GENERATE AC response shall be used.
6.3.3
Processing Restrictions
If the card and terminal Application Version Numbers are different, the terminal shall attempt to continue processing the transaction. If it is unable to continue, the terminal shall abort the transaction and should display the NOT ACCEPTED message. When processing the Application Usage Control, the terminal must know whether or not it is an ATM. See Annex A1 for information on identifying an ATM. A terminal supporting cashback should not offer cashback facility to the cardholder if the Application Usage Control does not allow this option.
May 2004
Page 45
6.3.4
Cardholder Verification Processing
The CVMs supported by the terminal are indicated in Terminal Capabilities. In addition, the terminal shall recognise the CVM codes for No CVM required and Fail CVM processing, which may be present in the cards CVM List. (CVM codes are defined in Annex C of Book 3.)
6.3.4.1
Offline CVM
When the applicable CVM is an offline PIN, the terminal should issue a GET DATA command to the card to retrieve the PIN Try Counter prior to issuing either the VERIFY command or GET CHALLENGE command. If the PIN Try Counter is not retrievable or the GET DATA command is not supported by the ICC, or if the value of the PIN Try Counter is not zero, indicating remaining PIN tries, the terminal shall prompt for PIN entry such as by displaying the message ENTER PIN. If the value of the PIN Try Counter is zero, indicating no remaining PIN tries, the terminal should not allow offline PIN entry. The terminal: shall set the PIN Try Limit exceeded bit in the TVR to 1 (for details on TVR, see Annex C of Book 3), shall not display any specific message regarding PINs, shall not set the CVM Results, and shall continue cardholder verification processing in accordance with the cards CVM List. If offline PIN verification by the ICC is successful, the terminal shall set byte 3 of the CVM Results to successful. Otherwise, the terminal shall not set the CVM Results and shall continue cardholder verification processing in accordance with the cards CVM List. (CVM Results is described in section 6.3.4.5 and coded according to Annex A4.)
6.3.4.2
Online CVM
When the applicable CVM is an online PIN, the IFD shall not issue a VERIFY command. Instead, the PIN pad shall encipher the PIN upon entry for transmission in the authorisation or financial transaction request. The terminal shall allow a PIN to be entered for online verification even if the cards PIN Try Limit is exceeded. The terminal shall set byte 3 of the CVM Results to unknown.
Page 46
May 2004
6.3.4.3
PIN Entry Bypass
If a PIN is required for entry as indicated in the cards CVM List, an attended terminal with an operational PIN pad may have the capability to bypass PIN entry before or after several unsuccessful PIN tries.1 If this occurs, the terminal: shall set the PIN entry required, PIN pad present, but PIN was not entered bit in the TVR to 1, shall not set the PIN Try Limit exceeded bit in the TVR to 1, shall consider this CVM unsuccessful, shall not set the CVM Results, and shall continue cardholder verification processing in accordance with the cards CVM List.
6.3.4.4
Signature (Paper)
When the applicable CVM is signature, the terminal shall set byte 3 of the CVM Results to unknown. At the end of the transaction, the terminal shall print a receipt with a line for cardholder signature. (See Annex A2 for requirements for the terminal to support signature as a CVM.)
6.3.4.5
CVM Results
When the applicable CVM is No CVM required, if the terminal supports No CVM required it shall set byte 3 of the CVM Results to successful. When the applicable CVM is Fail CVM processing, the terminal shall set byte 3 of the CVM Results to failed. The terminal shall set bytes 1 and 2 of the CVM Results with the Method Code and Condition Code of the last CVM performed. If the last CVM performed was not considered successful (byte 3 of the CVM Results is not set to successful or unknown), the terminal shall set byte 3 of the CVM Results to failed. If no CVM was performed (no CVM List present or no CVM conditions satisfied), the terminal shall set byte 1 of the CVM Results to No CVM performed.
This prevents a genuine cardholder who does not remember the PIN from having to keep entering incorrect PINs until the PIN is blocked in order to continue with the transaction.
May 2004
Page 47
6.3.5
Terminal Risk Management
In addition to the terminal risk management functions described in Book 3 and regardless of the coding of the cards Application Interchange Profile bit setting for Terminal Risk Management is to be performed, a terminal may support an exception file per application. When the terminal has an exception file listing cards and associated applications, the terminal shall check the presence of the card (identified by data such as the Application Primary Account Number (PAN) and the Application PAN Sequence Number taken from the currently selected application) in the exception file. If a match is found in the exception file, the terminal shall set the Card appears in exception file bit in the TVR to 1.
6.3.6
Terminal Action Analysis
As described in Book 3, during terminal action analysis the terminal determines whether the transaction should be approved offline, declined offline, or transmitted online by comparing the TVR with both Terminal Action Code Denial and Issuer Action Code - Denial, both Terminal Action Code - Online and Issuer Action Code - Online, and both Terminal Action Code - Default and Issuer Action Code - Default. If the terminal decides to accept the transaction offline, it shall set the Authorisation Response Code to Offline approved.2 If the terminal decides to decline the transaction offline, it shall set the Authorisation Response Code to Offline declined. If the terminal decides to transmit the transaction online, it shall not set a value for the Authorisation Response Code nor change the value for the Authorisation Response Code returned in the response message.
This does not mean that the transaction will be approved. The card makes the final decision and returns it to the terminal in its response to the first GENERATE AC command.
Page 48
May 2004
6.3.7
Card Action Analysis
In response to the GENERATE APPLICATION CRYPTOGRAM (AC) command, the card returns CID. Based on the CID, the terminal shall process the transaction as follows: If the card indicates: approval decline process online then the terminal: shall complete the transaction should display the APPROVED message shall decline the transaction should display the DECLINED message shall transmit an authorisation or financial transaction request message, if capable (See section 12.2.1 for exception handling when the terminal is unable to go online.) shall perform referrals as described in section 6.5.2.1 If advices are supported by the terminal acquirer interface protocol: If the transaction is captured, the terminal shall not create an advice message. If the transaction is not captured (such as a decline), the terminal shall either transmit an online advice if online data capture is performed by the acquirer, or create an offline advice for batch data capture. shall terminate the transaction should display the NOT ACCEPTED message Table 2: Card Action Analysis
referral advice
Service not allowed
May 2004
Page 49
6.3.8
Online Processing
Depending on the Authorisation Response Code returned in the response message, the terminal shall determine whether to accept or decline the transaction. It shall issue the second GENERATE AC command to the ICC indicating its decision. The result of card risk management performed by the ICC is made known to the terminal through the return of the CID indicating either a transaction certificate (TC) for an approval or an application authentication cryptogram (AAC) for a decline. When online data capture is performed by the acquirer, the terminal shall send a reversal message if the final decision of the card is to decline a transaction for which the Authorisation Response Code is Online approved.
6.3.9
Issuer-to-Card Script Processing
The terminal shall be able to support one or more Issuer Scripts in each authorisation or financial transaction response it receives, where the total length of all Issuer Scripts in the response shall be less than or equal to 128 bytes. The terminal shall be able to recognise the tag for the Issuer Script transmitted in the response message. If the tag is '71', the terminal shall process the script before issuing the second GENERATE AC command. If the tag is '72', the terminal shall process the script after issuing the second GENERATE AC command. For each Issuer Script processed, the terminal shall report the Script Identifier (when present) with its result in the Issuer Script Results. If an error code was returned by the card for one of the single Script Commands, the terminal shall set the most significant nibble of byte 1 of the Issuer Script Results to Script processing failed and the least significant nibble with the sequence number of the Script Command in the order it appears in the Issuer Script. If no error code was returned by the card, the terminal shall set the most significant nibble of byte 1 of the Issuer Script Results to Script processing successful and the least significant nibble to '0'. See Annex A5 for details. The terminal shall transmit the Issuer Script Results in the batch data capture message (financial record or offline advice), the financial transaction confirmation message, or the reversal message. If no message is created for the transaction (such as a decline), the terminal shall create an advice to transmit the Issuer Script Results, if the terminal supports advices.
Page 50
May 2004
6 Functional Requirements 6.4 Conditions for Support of Functions
6.4
Conditions for Support of Functions
A terminal supporting offline PIN verification shall support the VERIFY command. A terminal supporting offline PIN encipherment shall also support the GET CHALLENGE command. A terminal not supporting offline PIN verification need not support the VERIFY command. A terminal supporting DDA or CDA shall support SDA. An offline-only terminal and an offline terminal with online capability shall support SDA. An online-only terminal need not support SDA or DDA or CDA. Individual payment systems will define rules for this case. An offline-only terminal and an offline terminal with online capability shall support terminal risk management. An offline-only terminal and an online-only terminal need not support random transaction selection. An online-only terminal need not support all of the terminal risk management functions. In this case, the acquirer (or its agent) should process the transaction instead of the terminal according to Book 3. In other words, the acquirer should perform the remaining terminal risk management functions. Individual payment systems will define rules for this case. A financial institution- or merchant-controlled terminal (Terminal Type = '1x' or '2x') shall support the terminal risk management functions described in Book 3. A cardholder-controlled terminal (Terminal Type = '3x') need not support terminal risk management.
May 2004
Page 51
6 Functional Requirements 6.5 Other Functional Requirements
6.5
6.5.1
Other Functional Requirements

Amount Entry and Management
The amount of a transaction shall be indicated to the cardholder preferably by means of a terminal display or labels, such as posted prices on a vending machine, or alternatively by printing on a receipt. When the amounts are entered through the use of a keypad the terminal should allow the amount to be displayed during entry. The attendant or cardholder should be able to either correct the amounts entered prior to authorisation and proceed with the transaction or cancel the transaction if the amount was entered incorrectly. The cardholder should be able to validate the original or corrected amount when the transaction amount is known before authorisation. If PIN entry occurs immediately after the amounts are entered, PIN entry can act as the validation of the amount. If PIN entry does not occur immediately after the amounts are entered, the terminal should display the (Amount) OK? message for the cardholder to validate the amount fields. If the authorisation takes place before the final transaction amount is known (for example, petrol at fuel dispenser, amount before tip at restaurant), the Amount, Authorised data object represents the estimated transaction amount and the Transaction Amount data object represents the final transaction amount as known at the end of the transaction. The cardholder may have the ability to separately enter or identify a cashback amount prior to authorisation if the terminal supports cashback and the cards Application Usage Control indicates that cashback is allowed for the transaction. When cashback is allowed, the cashback amount shall be transmitted in the Amount, Other data object. The amounts transmitted in Amount, Authorised and Transaction Amount shall include both the purchase amount and cashback amount (if present). When passed to the ICC as part of the command data, the Amount, Authorised and Amount, Other shall be expressed with implicit decimal point (for example, '123' represents 1.23 when the currency code is '826').
Page 52
May 2004
6.5.2
Voice Referrals
A manual voice referral process may be initiated by the card or by the issuer. Only attended terminals should support voice referral processing. An attended terminal shall be capable of supporting voice referrals, (that is, it shall be capable of displaying the appropriate message when the card or issuer indicates a referral). An unattended terminal is not required to support voice referrals. If a referral cannot be performed, default procedures are in place for the individual payment systems to decide how the transaction shall be handled (for example, go online, approve offline, or decline offline).
6.5.2.1
Referrals Initiated by Card
If the card responds to the first GENERATE AC by requesting a voice referral (as indicated in the CID), an attended terminal shall display the CALL YOUR BANK message to the attendant. Appropriate application data, such as the Application PAN, shall be displayed or printed to the attendant in order to perform the referral. Appropriate messages shall be displayed requesting the attendant to enter data indicating that the transaction has been approved or declined as a result of the referral process. The attendant may manually override the referral process and may accept or decline the transaction without performing a referral, or the attendant may force the transaction online. As a result of the referral process or override, the terminal shall set the Authorisation Response Code to Approved (after card-initiated referral) if approved or Declined (after card-initiated referral) if not. The terminal shall bypass the issuance of the EXTERNAL AUTHENTICATE command and issue the second GENERATE AC command requesting either a TC for an approval or an AAC for a decline. If the transaction is forced online (by the terminal or the attendant), the terminal shall not set the Authorisation Response Code and shall transmit an authorisation or financial transaction request message using the Application Authorisation Referral (AAR) as an Authorisation Request Cryptogram (ARQC). The terminal shall continue normal online processing of the transaction (see section 6.3.8).
May 2004
Page 53
6.5.2.2
Referrals Initiated by Issuer
When the Authorisation Response Code in the authorisation response message indicates that a voice referral should be performed by the attendant, prior to issuing the second GENERATE AC command, an attended terminal shall display the CALL YOUR BANK message to the attendant. Appropriate application data, such as the Application PAN, shall be displayed or printed to the attendant in order to perform the referral. Appropriate messages shall be displayed requesting the attendant to enter data indicating that the transaction has been approved or declined as a result of the referral process. The attendant may manually override the referral process and may accept or decline the transaction without performing a referral. The terminal shall not modify the Authorisation Response Code. The terminal shall issue the second GENERATE AC command requesting either a TC for an approval or an AAC for a decline. If the Issuer Authentication Data is present in the authorisation response message, the terminal may issue the EXTERNAL AUTHENTICATE command either before or after the referral data is manually entered.
6.5.3
Transaction Forced Online
An attended terminal may allow an attendant to force a transaction online, such as in a situation where the attendant is suspicious of the cardholder. If this function is performed, it should occur at the beginning of the transaction. If this occurs, the terminal shall set the Merchant forced transaction online bit in the TVR to 1. Payment systems rules will determine whether the attendant is allowed to perform such a function.
6.5.4
Transaction Forced Acceptance
An attended terminal may allow an attendant to force acceptance of the transaction, even if the card has returned an AAC indicating that the transaction is to be declined. If this occurs, the transaction shall be captured for clearing as a financial transaction either by sending an online financial advice or within the batch data capture. The terminal shall not modify the Authorisation Response Code and shall set an indicator that the attendant forced acceptance of the transaction in the online advice or batch data capture. Payment systems rules will determine whether the attendant is allowed to perform such a function.
Page 54
May 2004
6 Functional Requirements 6.6 Card Reading
6.5.5
Transaction Sequence Counter
The terminal shall maintain a Transaction Sequence Counter that is incremented by one for each transaction performed by the terminal. The Transaction Sequence Counter may be common to both ICC and non-ICC transactions. The initial value of this counter is one. When the Transaction Sequence Counter reaches its maximum value, it shall be reset to one. A value of zero is not allowed. (See Book 3 for details on this data element.) The Transaction Sequence Counter may be used for transaction logging or auditing as well as for input to the application cryptogram calculation.
6.5.6
Unpredictable Number
The terminal shall be able to generate an Unpredictable Number, which may be used for input to the application cryptogram algorithm to ensure the unpredictability of data input to this calculation or for random transaction selection for terminal risk management. An unpredictable number shall be generated in accordance with an individual payment systems specifications. One example of a method for generating the Unpredictable Number is performing an exclusive-OR operation on all the previous ARQCs, TCs, AACs, and AARs.3 (See Book 3 for details on this data element.)
6.6
Card Reading
If the terminal does not have a combined IC and magnetic stripe reader, when the magnetic stripe of the card is read and the service code begins with a '2' or a '6' indicating that an IC is present, the terminal shall prompt for the card to be inserted into the IC reader such as by displaying the USE CHIP READER message. If the terminal has a combined IC and magnetic stripe reader, when the magnetic stripe of the card is read and the service code begins with a '2' or a '6' indicating that an IC is present, the terminal shall process the transaction using the IC.
This exclusive-OR operation is performed at each GENERATE AC response on the current application cryptogram and the previous exclusive-OR result, which is stored in the terminal.
May 2004
Page 55
6 Functional Requirements 6.6 Card Reading
6.6.1
IC Reader
The IFD should have a pictogram near the card slot indicating how to insert the card into the IC reader. As soon as the card is inserted into the reader, the message Please Wait should be displayed to reassure the cardholder or attendant that the transaction is being processed so that the card is not removed prematurely. When the card is inserted into the IFD, the card should be accessible to the cardholder at all times during the transaction. When the card is not accessible at all times or when the terminal has a tight grip to hold the card, there should be a mechanism, for example, a button, to recall or release the card in case of terminal malfunction, even if there is a power failure. For an unattended terminal with card capture capability, where captured cards remain in the secure housing of the terminal (such as for an ATM), the card release function is not required. When the card is inserted into the IFD, the cardholder or attendant should not be able to accidentally dislodge the card from the reader. If the card is removed from the terminal prior to completion of the transaction, the terminal should abort the transaction and should ensure that neither the card nor the terminal is damaged. The message Processing Error should be displayed. (For additional requirements on abnormal termination of transaction processing, see Book 3.)
6.6.2
Exception Handling
When an attended terminal attempts and fails to read the ICC but the magnetic stripe of the card is successfully read, the terminal shall set the POS Entry Mode Code in the transaction message(s) to Magnetic stripe read, last transaction was an unsuccessful IC read if the service code on the magnetic stripe indicates that an IC is present.4 Payment system rules determine whether fallback to magnetic stripe is allowed after the failure of an IC-read transaction. This behaviour is outside the scope of EMV specifications.
This does not imply that the terminal shall support this ISO 8583:1987 data element. An issuer or an acquirer may define an equivalent data element. The specific code will be set by individual payment systems.
Page 56
May 2004
6 Functional Requirements 6.7 Date Management
6.7
6.7.1
Date Management
Data Authentication
The terminal shall be capable of properly calculating dates associated with data authentication (certificate expiration dates) for dates before, including, and after the year 2000.
6.7.2
Processing Restrictions
The terminal shall be capable of properly calculating dates associated with processing restrictions (Application Expiration Date, Application Effective Date) for dates before, including, and after the year 2000.
6.7.3
Date Management
To ensure the accuracy of the data elements Transaction Date (local date) and Transaction Time (local time), the terminal shall ensure that it is able to accurately calculate, store, and display date-dependent fields representing the year 2000 and subsequent years without compromising the integrity of dates or their use, including calculations for leap years. This requirement applies to terminals supporting clocks as well as those that update the date and the time based upon on-line messages. The terminal should process a 2-digit year (YY) as follows: YY in the range 0049 inclusive is treated as having the value 20YY YY in the range 5099 inclusive is treated as having the value 19YY The same rules shall be used if the terminal converts 2-digit years in format YY to 4-digit years in format YYYY.
May 2004
Page 57
6 Functional Requirements 6.7 Date Management
Page 58
May 2004
Physical Characteristics
Physical characteristics vary depending on the intended usage of the terminal, the environment at the point of transaction (including its security), and the terminal configuration.
7.1
Keypad
A terminal should have a keypad for the entry of transaction-related data and its functional operation. The keypad shall support one or more types of keys , as listed in Table 3. Numeric Alphabetic and special Command Function '0' '9' For example, 'A' 'Z', '*', '#' 'Cancel', 'Enter', 'Clear' Application-dependent keys, such as a selection key, 'F1', 'F2', 'Backspace', 'Escape' Table 3: Key Types A keypad may consist of a single key, such as a function key that could be a button on a vending machine to indicate selection of an application or to indicate that a receipt is to be printed. A touch screen is considered to be a keypad. (See Book 2 for security requirements.)
May 2004
Page 59
7 Physical Characteristics 7.1 Keypad
7.1.1
Command Keys
Command keys are used to control the flow of data entry by the cardholder or attendant. Table 4 describes the command keys: Enter Cancel Clear Confirms an action Either cancels the whole transaction or, if no 'Clear' key is present, cancels the operation in progress Erases all the numeric or alphabetic characters previously entered Table 4: Command Keys If the colours green, red, or yellow are used, either for key lettering or the keys themselves, it is recommended that they be reserved for the command keys according to Table 5: Enter Cancel Clear Green Red Yellow
Table 5: Command Key Colours When the command keys are horizontally arranged, the 'Cancel' and 'Enter' keys should be located on the bottom row of the keypad, and 'Cancel' should be the furthest key left and 'Enter' should be the furthest key right. When the command keys are vertically arranged, 'Cancel' should be the uppermost key and 'Enter' the lowest key.
Page 60
May 2004
7 Physical Characteristics 7.1 Keypad
7.1.2
PIN Pad
The terminal should be designed and constructed to facilitate the addition of a PIN pad, if not already present, such as by having a serial port. If the terminal supports PIN entry, a separate keypad may be present for PIN entry or the same keypad may be used for both PIN entry and entry of other transaction-related data. The PIN pad shall comprise the numeric and 'Enter' and 'Cancel' command keys. If necessary, the command key for 'Clear' may also be present. It is recommended that the numeric layout of the PIN pad shall comply with ISO 9564 as shown in Figure 4, except for cardholder-controlled terminals such as personal computers (PCs), where the keyboard may contain a numeric keypad in a different format for PIN entry. An example of the placement of the 'Cancel' and 'Enter' keys on the bottom row is shown in Figure 4.
1 4 7
Cancel
2 5 8 0
3 6 9
Enter
Figure 4: PIN Pad Layout The key for '5' should have a tactile identifier (for example, a notch or raised dot) to indicate to those whose sight is impaired that this is the central key from which all others may be deduced.
May 2004
Page 61
7 Physical Characteristics 7.2 Display
7.2
Display
A display is used to help the cardholder or attendant monitor transaction flow and data entry, validate transaction-related data, and select options. An attended terminal shall have a display for the attendant and may have an additional display for the cardholder, such as when a PIN pad is present. In order that different information may be displayed and different languages used for the attendant and cardholder, it is recommended that an attended terminal has two separate displays. An unattended terminal should have a cardholder display. At a minimum, the message display shall be capable of displaying at least 32 alphanumeric characters (two lines of 16 positions each). The two lines of 16 characters should be simultaneously displayed. To facilitate the display of different languages used in different geographical areas, the terminal should support a graphic display. A terminal capable of supporting several applications should have a display that can provide cardholder application selection by allowing the 16-character Application Preferred Name(s) or Application Label(s) stored in the ICC to be displayed.
7.3
Memory Protection
Software as well as data initialised in the terminal or any part of the terminal, including cryptographic keys, shall not be erased or altered for the period of time the software and data are valid. When the terminal supports batch data capture, the captured transactions and advices stored in the terminal shall not be erased or altered until the next reconciliation with the acquiring system.
7.4
Clock
Offline-only terminals and offline terminals with online capability shall have a clock with the local date and time. The date is used for checking certificate expiration dates for data authentication and/or offline PIN encipherment as well as application expiration/effective dates for processing restrictions. The time may be used for assuring transaction identification uniqueness as well as for input to the application cryptogram algorithm.
Page 62
May 2004
7 Physical Characteristics 7.5 Printer
7.5
Printer
A terminal should have a printer for receipt printing. If present, the printer shall be able to print at least 20 alphanumeric characters per line (see section 11.4). Cardholder-controlled terminal (Terminal Type = '3x') need not include a printer.
7.6
Magnetic Stripe Reader
In addition to an IC reader, a terminal shall be equipped with a magnetic stripe reader, except when payment system rules indicate otherwise. These rules will cover situations when a magnetic stripe reader is not required or not allowed for a financial institution- or merchant-controlled terminal (Terminal Type = '1x' or '2x'). A cardholder-controlled terminal (Terminal Type = '3x') need not include a magnetic stripe reader. The magnetic stripe reader shall be able to read the full track 1 and/or track 2 and process according to the payment system rules.
May 2004
Page 63
7 Physical Characteristics 7.6 Magnetic Stripe Reader
Page 64
May 2004
Part III
Software Architecture
May 2004
Page 65
Page 66
May 2004
Terminal Software Architecture
This section is intended to provide insight for terminal manufacturers into the future direction of the payment system applications and the consequent requirements for terminal functionality. While terminals without this functionality may operate satisfactorily in todays environment, changes in that environment will enhance the longevity of and provide functional advantages to terminals incorporating the software design principles in this section.
8.1
Environmental Changes
In todays environment, support of payment system functions is provided in the typical POS terminal by one or possibly two applications based on the limited data available from the magnetic stripe of a payment system card. Differences in cards presented are largely contained in host systems and are usually transparent to the terminal software. The ICC replaces this environment with cards that may have multiple diverse applications, with significantly larger amounts of data representing a large number of options that must be interpreted by the terminal. The typical terminal will support multiple applications, with varying degrees of similarity. Applications may be modified annually, presenting additional challenges to software migration in the terminal. New applications will almost certainly be added during the life of a terminal. There will be a need to add applications efficiently and without risk to existing applications. Modification or addition of applications should be done in such a way that unaffected applications need not be re-certified. Code should be reusable and sharable with adequate security controls to accomplish such migration with efficiency and integrity. Greater differentiation between the payment systems should be anticipated at the terminal, expressed by data contained within the ICC. This may (and probably will) be carried down to regional and even issuer levels, requiring the terminal to keep a library of routines available for selection by the card. The terminal may support only a subset of alternative routines, but terminals that support more will be at an advantage in the marketplace. At the level of this specification, the payment systems view two alternative software architectures as providing the capabilities required. These two alternatives are called the Application Program Interface (API) and the Interpreter approaches.
May 2004
Page 67
8 Terminal Software Architecture 8.2 Application Libraries
8.2
Application Libraries
Application A
call X
With either the API or the interpreter approach, the terminal should have the ability to maintain an application library of modules or routines that may be dynamically incorporated into the processing of a given transaction. Modules in the application library may be complete application programs, or they may be subroutines to be called upon at the direction of data within the terminal or the ICC. In the case of an interpreter capability, these modules will be code, written in a virtual machine instruction set implemented within the terminal, to be interpreted by the terminal control program. In the case of the API approach, modules will be object code written to the specific terminal architecture. In either case, modules within the application library may be dynamically invoked either by logic with the terminal application software or under the direction of referencing data kept within the ICC. The format and specification of external references are under control of the individual payment systems.
Application B
call X
call Y
Application D
call X call Y
Operating System
Figure 5: Terminal Software
A terminal may contain several libraries, some accessible to all applications and some restricted to particular applications or payment systems.
Page 68
Common Subroutines
May 2004
Application C
8 Terminal Software Architecture 8.3 Application Program Interface
8.3
Application Program Interface
This section describes a terminal software architecture through which application programs can make use of a set of essential and frequently used functions provided in terminals through a standard interface - the API. The API takes the form of a library of functions that can be used by all applications stored in the terminal. The functions in the library may be dynamically linked into the application programs that use them. The provision of these functions as a library in the terminal has a number of advantages: Each application program in the terminal does not need to include the same code to implement standardised functionality. The implementation of only one copy of code in each terminal to perform this functionality is very efficient in terminal memory. Application programs do not need to take account of particular terminal hardware configurations, as these will be transparent to the application program at the API. The implications of a particular terminals hardware implementation are embedded within the code of the library function that has been certified for that terminal. Certification of new terminal application programs will take place against the standardised and approved API function library for a particular terminal and does not require the re-certification of existing terminal applications programs (as would be the case with a single terminal program). The verification of firewalls between application programs is considerably eased by this architecture. While a single library of functions is used to construct the API, the library contains functions in two broad classes: Functions that implement the application selection functionality described in Book 1 Functions that implement essential and frequently used terminal hardware functionality (for example, display, get key entry, etc.) Functions in the library may use other functions within the library. For example, SDA may use a terminal hardware function to read data from an application on the card. Functions in the library may be written using either terminal dependent object code or a more general virtual machine instruction set.
May 2004
Page 69
8 Terminal Software Architecture 8.4 Interpreter
8.4
8.4.1
Interpreter
Concept
This section describes the general architecture underlying an interpreter implementation and gives a brief overview of how it relates to the future environment for payment system applications. Use of ICC technology necessitates altering the firmware in all terminals that accept ICCs. To facilitate this transition, an interpreter may be implemented as a software system that is compact, efficient, and easy to maintain and enhance for future payment system needs. The name arises from the capability of a terminal to contain central processing unit (CPU)-independent application programs and plugs that can be interpreted during a transaction to determine the terminals behaviour. An interpreter implementation defines a single software kernel, common across multiple terminal types. This kernel creates a virtual machine that may be implemented on each CPU type and that provides drivers for the terminals input/output (I/O) and all low-level CPU-specific logical and arithmetic functions. High-level libraries, terminal programs and payment applications using standard kernel functions may be developed and certified once; thereafter, they will run on any conforming terminal implementing the same virtual machine without change. Therefore, a significant consequence of an interpreter is a simplified and uniform set of test and certification procedures for all terminal functions. To summarise, interpreters provide the following major benefits: A kernel with generalised ICC support functions, to be installed in each terminal only once. The kernel lifetime is expected to match that of the terminal (710 years). One version of the terminal software kernel across multiple processor and terminal types. Therefore, only one certification and validation is needed for software libraries, terminal programs, and payment applications on the set of terminal types supported using a common interpreter/virtual machine. Terminal kernel certification independent of applications, so certification only needs to be performed once for each terminal type using a common interpreter/virtual machine. A terminal type is defined as a specific configuration of terminal CPU and I/O functions. Support for CPU-independent plugs that can be interpreted during a transaction to enhance a terminals behaviour. CPU independence means that only one certification and validation is needed for this code.
Page 70
May 2004
8 Terminal Software Architecture 8.4 Interpreter
8.4.2
Virtual Machine
The application software in every terminal using the interpreter approach is written in terms of a common virtual machine. The virtual machine is a theoretical microprocessor with standard characteristics that define such things as addressing mode, registers, address space, etc. The virtual machine accesses memory in two areas: code space and data space. All code accesses are internal to the virtual machine only and are not available to programs; the memory fetch and store operators access data space only. Translated program code only exists in code space. No terminal software (libraries or other functions external to the kernel) can make any assumptions regarding the nature or content of code space or attempt to modify code space in any way. This restriction, plus the complete absence of a symbol table, adds significantly to program security.
8.4.3
Kernel
A kernel contains all functions whose implementation depends upon a particular platform (CPU and operating system). It includes a selected set of commands, plus a number of specialised functions, such as terminal I/O support and program loader/interpreter support.
8.4.4
Application Code Portability
Virtual machine emulation may be accomplished by one of three methods: interpreting virtual machine instructions, translating the virtual machine language into a directly executable threaded code form, or translating it into actual code for the target CPU. The latter two methods offer improved performance at a modest cost in complexity. The kernel for each particular CPU type is written to make that processor emulate the virtual machine. The virtual machine concept makes a high degree of standardisation possible across widely varying CPU types and simplifies program portability, testing, and certification issues. Programs may be converted to an intermediate language, between the high-level source language used by the programmer and the low-level machine code required by the microprocessor, and subsequently transported to the target terminal to be processed by the terminal into an executable form.
May 2004
Page 71
8 Terminal Software Architecture 8.5 Plugs and Sockets
8.5
Plugs and Sockets
One function of ICCs is to improve transaction security by incorporating and managing enciphered data and participating actively in the transaction validation process. Under this concept, the payment systems define a number of procedures (referred to as sockets) that may be inserted by the application programmer (and hence under acquirer control and under payment system supervision) to act as placeholders for the addition of enhancing code during transaction processing. Sockets are intended to be placed at various points in existing terminal applications or even in the terminal program itself. They are used to refer to library functions and may even occur inside a library function if a payment system foresees the need to change the way a library function operates. Sockets are initialised to default behaviours. If no further action is taken by the terminal program, the default behaviour of these procedures will be to do nothing when they are executed. Plugs are executable code, written in the machine language or virtual machine instruction set supported by the terminal, that may be inserted at points defined by sockets to enhance the default terminal logic. Plugs may already exist in the terminal to be invoked under control of data in the ICC and logic in the terminal. Plugs may also come from an input device (such as the ICC or a host system connected to the terminal), but only if agreed by the payment system, issuer, acquirer, and merchant. Special care may be required for ICC plugs if they can modify a sockets behaviour or be placed in the program flow prior to successful card authentication. At the conclusion of a transaction, the sockets are restored to their original application default behaviours. The proposed terminal architecture does not propose that ICCs contain entire applications but only plugs that enhance existing terminal applications.
Page 72
May 2004
Figure 6 illustrates the relationship between plugs and sockets.
Input Device
Plugs
Terminal
Operating System
ug t os oc ke t
Pl
Security/Control Applications
Socket
A B C D
Socket/Plug identifiers
Socket
Socket
Socket
Plug Library
Figure 6: Socket/Plug Relationship
May 2004
Page 73
Page 74
May 2004
Software Management
A means of software upgrade shall be supported wherever this is not in conflict with national legal restrictions. The software upgrade may be facilitated from a remote site over a network or locally. Software upgrade may be performed under terminal application control or under terminal owner or acquirer human control. When software upgrade is performed under terminal application control, prior to accepting new software, the terminal shall: Verify the identity of the party loading the software, since only software issued by the terminal manufacturer, owner, or a third party approved by the owner or acquirer can be loaded in the terminal. Verify the integrity of the loaded software. When both tests are successful, the terminal shall notify the party loading the software whether the load was successfully performed or not. To facilitate ICC application upgrade from one version to another, the terminal should be able to support at least two versions of the ICC application, as identified by the terminals Application Version Numbers.
May 2004
Page 75
9 Software Management
Page 76
May 2004
10 Data Management
The data elements listed in this section shall be initialised in the terminal or obtainable at the time of a transaction. (Definitions for these data are in Book 3.) Additional data elements may be required for initialisation, such as those currently used for magnetic stripe processing. Whenever a data element is initialised or updated, data integrity shall be assured. Data elements resident in the terminal shall be under the control of one of the following parties: Terminal manufacturer: For example, IFD Serial Number Acquirer (or its agent): For example, Merchant Category Code Merchant: For example, Local Date and Local Time (these may be controlled by either the merchant or acquirer) The terminal shall be constructed in such a way that: Terminal Capabilities and Additional Terminal Capabilities are initialised in the terminal before the terminal is placed in its operational state. Terminal Type is initialised in the terminal at the moment of installation. Terminal Capabilities, Additional Terminal Capabilities, and Terminal Type cannot be modified unintentionally or by unauthorised access. Whenever the terminals capabilities are updated or modified, Terminal Capabilities, Additional Terminal Capabilities, and Terminal Type are accurately updated. The terminal should be constructed in such a way that the data which is under control of the acquirer is only initialised and updated by the acquirer (or its agent).
May 2004
Page 77
10 Data Management 10.1 Application Independent Data
10.1 Application Independent Data

The following data elements are application independent and shall be unique to the terminal (see section 5.3 for different terminal configurations): Local Date Local Time Terminal Country Code Transaction Sequence Counter The following data elements are application independent and may be specific to each device constituting the terminal, such as a host concentrating a cluster of devices (see Figure 2 for an example): Additional Terminal Capabilities IFD Serial Number Terminal Capabilities Terminal Type The terminal shall have parameters initialised so that it can identify what language(s) are supported to process the cards Language Preference (see section 11.1).
Page 78
May 2004
10 Data Management 10.2 Application Dependent Data
10.2 Application Dependent Data

The following data elements are application dependent and, if required, are specified by individual payment system specifications: Data Elements Acquirer Identifier Application Identifier (AID) Application Version Number Certification Authority Public Key Certification Authority Public Key Exponent Certification Authority Public Key Modulus Certification Authority Public Key Index Required if terminal supports offline data authentication and/or offline PIN encipherment. See Book 2. Required if terminal supports offline data authentication and/or offline PIN encipherment: The key index in conjunction with the Registered Application Provider Identifier (RID) of the payment system AID identifies the key and the algorithm for offline data authentication and/or PIN encipherment. See Book 2. Required if terminal supports DDA or CDA. If not present, a default TDOL with no data objects in the list shall be assumed. Required if offline terminal with online capability. Notes
Default Dynamic Data Authentication Data Object List (DDOL) Default Transaction Certificate Data Object List (TDOL) Maximum Target Percentage to be used for Biased Random Selection Merchant Category Code Merchant Identifier Merchant Name and Location
Table 6: Application Dependent Data Elements
May 2004
Page 79
Data Elements PIN Pad Secret Keys
Notes Required if the PIN pad and IC reader are not an integrated tamper-evident device or if the terminal supports enciphering PINs for online verification. More than one secret key may be needed. Required if offline terminal with online capability. Required if non-zero values to be used 5
Target Percentage to be used for Random Selection Terminal Action Code - Default Terminal Action Code - Denial Terminal Action Code - Online Terminal Floor Limit Terminal Identification Terminal Risk Management Data Threshold Value for Biased Random Selection Transaction Currency Code Transaction Currency Exponent Transaction Reference Currency Code Transaction Reference Currency Conversion Transaction Reference Currency Exponent
Required if offline terminal or offline terminal with online capability. If required by individual payment system rules. Required if offline terminal with online capability.
Table 6: Application Dependent Data Elements, continued The terminal shall provide the necessary logical key slots to handle the active and future replacement Certification Authority Public Keys necessary for data authentication and/or offline PIN encipherment. Each logical key slot shall contain the following data: RID, Certification Authority Public Key Index, and Certification Authority Public Key.
According to Book 3, the default value consists of all bits set to 0, although the Data authentication was not performed, SDA failed, DDA failed and CDA failed bits are strongly recommended to be set to 1 in the Terminal Action Code - Default and Terminal Action Code - Online.
Page 80
May 2004
When the Certification Authority Public Key is loaded to the terminal, the terminal shall verify the Certification Authority Public Key Check Sum to detect a key entry or transmission error. This checksum is calculated using the terminal-supported Secure Hash Algorithm. If the verification process fails, the terminal shall not accept the Certification Authority Public Key and, if operator action is needed, the terminal shall display an error message. After the Certification Authority Public Key is successfully loaded, the terminal should store the Certification Authority Public Key Check Sum. A means for updating data elements specific to payment system applications shall be supported wherever this is not in conflict with national legal restrictions. Data update may be facilitated from a remote site over a network or locally.
May 2004
Page 81
Page 82
May 2004
Part IV
Cardholder, Attendant, and Acquirer Interface
May 2004
Page 83
Page 84
May 2004
11 Cardholder and Attendant Interface

11.1 Language Selection
The terminal shall support at least the local language which is the language of common usage in the terminals locality or region. The messages displayed to the attendant shall always be in the local language. To display the standard messages defined in section 11.2, the terminal shall support the common character set as defined in Annex B, and should support the relevant character set defined in the corresponding part of ISO/IEC 8859 when necessary. Depending on the local environment and business conditions, the terminal should support multiple languages for displaying the set of messages described in section 11.2 to the cardholder. A terminal supporting multiple languages may need additional parts of ISO/IEC 8859 to display characters relevant to these languages. ISO/IEC 8859 consists of several parts, each part specifying a set of up to 191 characters coded by means of a single 8-bit byte. Each part is intended for use for a group of languages. All parts of ISO/IEC 8859 contain a common set of 95 characters, coded between '20' (hexadecimal) and '7E' (hexadecimal) as shown in Annex B. This common character set allows the terminal to display Application Label(s) and messages in multiple languages using Latin characters without using diacritic marks (see example in Annex B). A terminal supporting multiple languages shall compare the cards Language Preference with the languages supported in the terminal at the beginning of the transaction. If a match is found, the language with the highest preference shall be used in the messages displayed to the cardholder. Language Preference is coded so that the language with the highest preference appears first and the lowest preference appears last. If no match is found and the terminal supports more than one language, the terminal shall allow the cardholder to select the preferred language at the beginning of the transaction. The messages shall be displayed to the cardholder in the selected language. If no match is found or the terminal supports only one language, the terminal shall display messages in that language. When a message is displayed to the cardholder as well as the attendant, it should be displayed to the attendant in the local language and to the cardholder in the preferred language, if supported.
May 2004
Page 85
11 Cardholder and Attendant Interface 11.2 Standard Messages
11.2 Standard Messages6

To ensure consistency in the messages displayed by the terminal and the PIN pad, the following set of messages (or their equivalent meaning) shall be used in the languages of preference for the cardholder and attendant. The messages shall be uniquely identified by a two-character message identifier as shown below. The message identifier is for identification purposes only and is not to be displayed to the cardholder or attendant. Values '01' '13' (hexadecimal) are described in Table 7. Values '14' '3F' (hexadecimal) are reserved for assignment according to this specification. Values '40' '7F' (hexadecimal) are reserved for use by the individual payment systems. Values '80' 'BF' (hexadecimal) are reserved for use by acquirers. Values 'C0' 'FF' (hexadecimal) are reserved for use by issuers. There may be additional messages displayed for the attendant or cardholder.
Note: Messages may be displayed simultaneously, such as Incorrect PIN and Enter PIN.
This specification does not imply that the terminal shall support a set of standard messages in English.
Page 86
May 2004
Message Identifier '01' '02'
Message (AMOUNT) (AMOUNT) OK?
Definition Indicates the transaction amount to both the cardholder and attendant. Invites a response from the cardholder indicating agreement or disagreement with the displayed transaction amount. Agreement or disagreement should be denoted by pressing the 'Enter' or 'Cancel' keys, respectively. Indicates to the cardholder and attendant that the transaction has been approved. Indicates to the cardholder or attendant to contact the issuer or acquirer, as appropriate, such as for voice referrals. When used with the ENTER PIN message, instructs the cardholder to validate PIN entry by pressing the 'Enter' key or to cancel PIN entry by pressing the 'Cancel' key. Indicates to the cardholder or attendant a malfunction of the card or a non-conformance to answer-to-reset. Indicates to the cardholder and attendant that the online or offline authorisation has not been approved. Instructs the cardholder at an unattended terminal or the attendant at an attended terminal to enter the amount of the transaction. Confirmation or cancellation of amount entry should be denoted by pressing the 'Enter' or 'Cancel' keys, respectively. Invites the cardholder to enter the PIN for the first and subsequent PIN tries. An asterisk is displayed for each digit of the PIN entered.
'03'
APPROVED
'04'
CALL YOUR BANK CANCEL OR ENTER
'05'
'06'
CARD ERROR
'07'
DECLINED
'08'
ENTER AMOUNT
'09'
ENTER PIN
Table 7: Standard Messages
May 2004
Page 87
Message Identifier '0A'
Message INCORRECT PIN INSERT CARD
Definition Indicates that the PIN entered by the cardholder does not match the reference PIN. Instructs to insert the ICC into the IFD. Correct insertion should be noted by displaying the message PLEASE WAIT to reassure the cardholder or attendant that the transaction is being processed. Indicates to the cardholder and attendant that the application is not supported or there is a restriction on the use of the application; for example, the card has expired. Indicates that offline PIN verification was successful. Indicates to the cardholder and attendant that the transaction is being processed. Displayed to the cardholder or attendant when the card is removed before the processing of a transaction is complete, or when the transaction is aborted because of a power failure, or when the system or terminal has malfunctioned, such as communication errors or time-outs. Instructs to remove the ICC from the IFD. Instructs to insert ICC into the IC reader of the IFD, when the IC and magnetic stripe readers are not combined. Instructs to insert ICC into the magnetic stripe reader of the terminal after IC reading fails, when the IC and magnetic stripe readers are not combined. Invites the cardholder to re-execute the last action performed.
'0B'
'0C'
NOT ACCEPTED
'0D' '0E'
PIN OK PLEASE WAIT
'0F'
PROCESSING ERROR
'10' '11'
REMOVE CARD USE CHIP READER
'12'
USE MAG STRIPE
'13'
TRY AGAIN
Table 7: Standard Messages, continued

Page 88 May 2004
11 Cardholder and Attendant Interface 11.3 Application Selection
11.3 Application Selection

A terminal shall support application selection using the List of AIDs method as described in Book 1, section 12.3.3. A terminal may support application selection using the payment systems directory as described in Book 1. A terminal supporting more than one application should offer the cardholder the ability to select an application or confirm the selection proposed by the terminal. Applications supported by both the ICC and the terminal shall be presented to the cardholder in priority sequence according to the cards Application Priority Indicator, if present, with the highest priority listed first. A terminal allowing cardholder selection or confirmation shall create a list of ICC applications that are supported by the terminal as described in Book 1 and shall display: the Application Preferred Name(s), if present and if the Issuer Code Table Index indicating the part of ISO/IEC 8859 to use is present and supported by the terminal (as indicated in Additional Terminal Capabilities) otherwise, the Application Label(s), if present, by using the common character set of ISO/IEC 8859 (see Annex B) A terminal not offering the cardholder the ability to select or confirm a selection shall determine those applications supported by both the card and the terminal that may be selected without confirmation of the cardholder according to Application Priority Indicator, if present. The terminal shall select the application with the highest priority from those. If the card returns SW1 SW2 other than '9000' in response to the SELECT command, indicating that the transaction cannot be performed with the selected application: A terminal allowing cardholder selection or confirmation should display the TRY AGAIN message and shall present to the cardholder the list of applications supported by both the ICC and the terminal without this application. A terminal not offering cardholder selection or confirmation shall select the application with the next highest priority among those supported by both the ICC and the terminal that may be selected without cardholder confirmation. If no application can be selected, the terminal should display the NOT ACCEPTED message and shall terminate the transaction. The application used for the transaction shall be identified on the transaction receipt by the partial Application PAN (or the full PAN, if allowed by payment system rules) and the AID.
May 2004
Page 89
11 Cardholder and Attendant Interface 11.4 Receipt
11.4 Receipt
Whenever a receipt is provided, it shall contain the AID in addition to the data required by payment system rules.7 The AID shall be printed as hexadecimal characters.
The receipt may contain the partial Application PAN (or full if allowed).
Page 90
May 2004
12 Acquirer Interface
12.1 Message Content
Messages typically flow from the terminal to the acquirer and from the acquirer to the issuer. Message content may vary from one link to another, with data being added to enrich the message at the acquirer. To enrich the message, the acquirer stores static point of transaction data elements 8 based on the Merchant Identifier and/or the Terminal Identifier. These data elements are implicitly referred to by the Merchant/Terminal Identifier(s) and therefore may be absent in terminal to acquirer messages.9 In the following sections, this implicit relationship is indicated by a specific condition: Present if the Merchant/Terminal Identifier(s) do not implicitly refer to the (data element). Message content may also vary due to data requested by the acquirer but not the issuer, such as for transaction capture or audit. The ICC stored data elements are implicitly known by the issuer 10 based on the AID and/or PAN and therefore may be absent in acquirer to issuer messages. In the following sections, this implicit relationship is indicated by a specific condition: Present if requested by the acquirer. Data requirements may differ depending on terminal operational control, which is recognised through a specific condition: Present for Terminal Type = xx. For example, Merchant Identifier is provided only for a merchant-controlled terminal (Terminal Type = '2x'). An authorisation message shall be used when transactions are batch data captured. A financial transaction message shall be used when online data capture is performed by the acquirer. An offline advice shall be conveyed within batch data capture when supported. An online advice or a reversal message shall be transmitted real-time, similarly to an authorisation or financial transaction message.
These data elements indicate point of transaction acceptance characteristics that rarely change, such as Merchant Category Code, Acquirer Identifier, or Terminal Country Code. At a minimum, all data listed in the Card Risk Management Data Object Lists and the TDOL shall be available at the point of transaction.
10 These data elements reflect card acceptance conditions and restrictions that rarely change, such as Application Interchange Profile, Application Usage Control, or Issuer Action Codes.
May 2004
Page 91
12 Acquirer Interface 12.1 Message Content
This section describes requirements associated with ICC transactions and distinguishes between existing data elements used for magnetic stripe transactions and those created specifically for ICC transactions. Data elements referred to as existing are those defined in ISO 8583:1987, though actual terminal message contents are usually specific to (each of) the acquiring system(s) to which the terminal is connected. For informational purposes, Annex C describes an example of converting ICC-related and terminal-related data into message data elements.
Page 92
May 2004
12.1.1
Authorisation Request
An authorisation request should convey the data elements contained in Table 8 and Table 9 subject to the specified conditions. Table 8 contains the new data elements specifically created for an ICC transaction. Data Element Application Interchange Profile * 11 Application Transaction Counter * ARQC * CID The CID does not need to be forwarded to the issuer; the presence of this data element is defined in the respective payment system network interface specifications. Present if Terminal Identifier does not implicitly refer to IFD Serial Number Present if provided by ICC in GENERATE AC command response Condition
CVM Results IFD Serial Number Issuer Application Data * Terminal Capabilities Terminal Type TVR * Unpredictable Number* Present if input to application cryptogram calculation
Table 8: ICC-specific Authorisation Request Data Elements
Data elements marked with an asterisk are the minimum set of data elements to be supported in authorisation request and response messages, as well as clearing messages, for ICC transactions.
11
May 2004
Page 93
Table 9 contains existing data elements necessary for an ICC transaction. Data Element Acquirer Identifier Condition Present for Terminal Type = '1x' or '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single acquirer Present if cashback used for current transaction Present if in ICC Present if not in Track 2 Equivalent Data Present if not in Track 2 Equivalent Data Present if in ICC Present if CVM performed is enciphered PIN for online verification Present for Terminal Type = '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single merchant category Present for Terminal Type = '2x' if Terminal Identifier does not implicitly refer to a single merchant
Amount, Authorised * 12 Amount, Other * Application Effective Date Application Expiration Date Application PAN * Application PAN Sequence Number * Enciphered PIN Data Merchant Category Code
Merchant Identifier
POS Entry Mode Terminal Country Code * Terminal Identifier Track 2 Equivalent Data Transaction Currency Code * Transaction Date * Transaction Time Transaction Type * Table 9: Existing Authorisation Request Data Elements Present if Terminal Type = 'x2', 'x3', 'x5', or 'x6' Present if in ICC
12
Page 94
May 2004
12.1.2
Financial Transaction Request
A financial transaction request should convey the data elements contained in Table 10 and Table 11 subject to the specified conditions. Table 10 contains the new data elements created specifically for an ICC transaction. Data Element Application Interchange Profile * 13 Application Transaction Counter * Application Usage Control ARQC * CID The CID does not need to be forwarded to the issuer; the presence of this data element is defined in the respective payment system network interface specifications. Present if requested by acquirer Present if Terminal Identifier does not implicitly refer to IFD Serial Number Present if requested by acquirer Present if requested by acquirer Present if requested by acquirer Present if provided by ICC in GENERATE AC command response Present if requested by acquirer Condition
CVM List CVM Results IFD Serial Number Issuer Action Code - Default Issuer Action Code - Denial Issuer Action Code - Online Issuer Application Data * Terminal Capabilities Terminal Type TVR * Unpredictable Number *
Present if input to application cryptogram calculation
Table 10: ICC-specific Financial Transaction Request Data Elements

13
May 2004
Page 95
Table 11 contains existing data elements necessary for an ICC transaction. Data Element Acquirer Identifier Condition Present for Terminal Type = '1x' or '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single acquirer Present if final transaction amount is different from authorised amount Present if cashback used for current transaction Present if in ICC Present if not in Track 2 Equivalent Data Present if not in Track 2 Equivalent Data Present if in ICC Present if CVM performed is Enciphered PIN for online verification. Present if requested by acquirer Present for Terminal Type = '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single merchant category Present for Terminal Type = '2x' if Terminal Identifier does not implicitly refer to a single merchant
Amount, Authorised * 14 Amount, Other * Application Effective Date Application Expiration Date Application PAN * Application PAN Sequence Number * Enciphered PIN Data Issuer Country Code Merchant Category Code
Merchant Identifier
POS Entry Mode Terminal Country Code * Terminal Identifier Track 2 Equivalent Data Transaction Amount * Transaction Currency Code * Transaction Date * Transaction Time Transaction Type *
Present if in ICC
Present if Terminal Type = 'x2', 'x3', 'x5', or 'x6'
Table 11: Existing Financial Transaction Request Data Elements
14
Page 96
May 2004
12.1.3
Authorisation or Financial Transaction Response
Authorisation and financial transaction responses should convey the data elements contained in Table 12 and Table 13 subject to the specified conditions. Table 12 contains the new data elements specifically created for an ICC transaction. Data Element Issuer Authentication Data * 15 Issuer Script * Issuer Script Template 1 Issuer Script Template 2 Condition Present if online issuer authentication performed Present if commands to ICC are sent by issuer
Table 12: ICC-specific Authorisation or Financial Transaction Response Data Elements Table 13 contains existing data elements necessary for an ICC transaction. Data Element Acquirer Identifier Amount, Authorised Authorisation Code Authorisation Response Code Terminal Identifier Transaction Date Transaction Time Table 13: Existing Authorisation or Financial Transaction Response Data Elements Present if transaction is approved Condition Present for Terminal Type = '1x' or '2x' if in request message
15
May 2004
Page 97
12.1.4
Financial Transaction Confirmation
A financial transaction confirmation should convey the data elements contained in Table 14 and Table 15 subject to the specified conditions. Table 14 contains the new data elements specifically created for an ICC transaction. Data Element Issuer Script Results TC or AAC Table 14: ICC-specific Financial Transaction Confirmation Data Elements Table 15 contains existing data elements necessary for an ICC transaction. Data Element Terminal Identifier Table 15: Existing Financial Transaction Confirmation Data Elements Condition Condition Present if script commands to ICC are delivered by terminal
Page 98
May 2004
12.1.5
Batch Data Capture
Batch data capture should convey the data elements contained in Table 16 and Table 17 subject to the specified conditions. Message Type is used to distinguish between an offline advice and a financial record. Table 16 contains the new data elements specifically created for an ICC transaction. Data Element Application Interchange Profile * 16 Application Transaction Counter * Application Usage Control CID Present if requested by acquirer The CID does not need to be forwarded to the issuer; the presence of this data element is defined in the respective payment system network interface specifications. Present if requested by acquirer Present if Terminal Identifier does not implicitly refer to IFD Serial Number Present if requested by acquirer Present if requested by acquirer Present if requested by acquirer Present if provided by ICC in GENERATE AC command response Present if script commands to ICC are delivered by terminal Condition
CVM List CVM Results IFD Serial Number Issuer Action Code - Default Issuer Action Code - Denial Issuer Action Code - Online Issuer Application Data * Issuer Script Results Terminal Capabilities Terminal Type TVR * TC/ARQC or AAC * Unpredictable Number *
ARQC may be used as TC substitute Present if input to application cryptogram calculation
Table 16: ICC-specific Batch Data Capture Data Elements

16
May 2004
Page 99
Table 17 contains existing data elements necessary for an ICC transaction. Data Element Acquirer Identifier Condition Present if for Terminal Type = '1x' or '2x' Merchant Identifier or Terminal Identifier does not implicitly refer to a single acquirer Present if final transaction amount is different from authorised amount Present if cashback used for current transaction Present if in ICC
Amount, Authorised * 17 Amount, Other * Application Effective Date Application Expiration Date Application PAN * Application PAN Sequence Number * Authorisation Code Authorisation Response Code Issuer Country Code Merchant Category Code
Present if in ICC Present if transaction is approved
Present if requested by acquirer Present for Terminal Type = '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single merchant category Present for Terminal Type = '2x' if Terminal Identifier does not implicitly refer to a single merchant
Merchant Identifier
Message Type POS Entry Mode Terminal Country Code * Terminal Identifier Transaction Amount * Table 17: Existing Batch Data Capture Data Elements
17
Page 100
May 2004
Data Element Transaction Currency Code *
Condition Present if Merchant Identifier or Terminal Identifier does not implicitly refer to a single transaction currency accepted at point of transaction
Transaction Date * Transaction Time Transaction Type * Table 17: Existing Batch Data Capture Data Elements, continued
12.1.6
Reconciliation
A reconciliation should convey the existing data elements necessary for ICC transactions and subject to the specified conditions. Data Element Acquirer Identifier Condition Present for Terminal Type = '1x' or '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single acquirer Present for Terminal Type = '2x' if Terminal Identifier implicitly does not refer to a single merchant Present if Merchant Identifier or Terminal Identifier does not implicitly refer to a single transaction currency accepted at point of transaction
Amount, Net Reconciliation Merchant Identifier
Reconciliation Currency Code
Terminal Identifier Transactions Number (per transaction type) Transactions Amount (per transaction type) Table 18: Existing Reconciliation Data Elements
May 2004
Page 101
12.1.7
Online Advice
An online advice should convey the data elements contained in Table 19 and Table 20 subject to the specified conditions. Table 19 contains the new data elements specifically created for an ICC transaction. Data Element Application Interchange Profile Application Transaction Counter CID CVM Results IFD Serial Number Issuer Application Data Issuer Script Results Terminal Capabilities Terminal Type TVR TC or AAC Unpredictable Number Present if input to application cryptogram calculation Present if Terminal Identifier does not implicitly refer to IFD Serial Number Present if provided by ICC in GENERATE AC command response Present if script commands to ICC are delivered by terminal Condition
Table 19: ICC-specific Online Advice Data Elements
Page 102
May 2004
Table 20 contains existing data elements necessary for an ICC transaction. Data Element Acquirer Identifier Condition Present for Terminal Type = '1x' or '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single acquirer Present if final transaction amount is different from authorised amount Present if in ICC Present if not in Track 2 Equivalent Data Present if not in Track 2 Equivalent Data Present if in ICC
Amount, Authorised Application Effective Date Application Expiration Date Application PAN Application PAN Sequence Number Authorisation Response Code Merchant Category Code
Present for Terminal Type = '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single merchant category Present for Terminal Type = '2x' if Terminal Identifier does not implicitly refer to a single merchant Present if Terminal Identifier or IFD Serial Number does not implicitly refer to a single terminal country Present if in ICC Present if Merchant Identifier or Terminal Identifier does not implicitly refer to a single transaction currency accepted at point of transaction Present if Terminal Type = 'x2', 'x3', 'x5', or 'x6'
Merchant Identifier
POS Entry Mode Terminal Country Code
Terminal Identifier Track 2 Equivalent Data Transaction Amount Transaction Currency Code
Transaction Date Transaction Time Transaction Type Table 20: Existing Online Advice Data Elements
May 2004
Page 103
12.1.8
Reversal
A reversal should convey the data elements contained in Table 21 and Table 22 subject to the specified conditions. Table 21 contains the new data elements specifically created for an ICC transaction. Data Element Application Interchange Profile Application Transaction Counter IFD Serial Number Issuer Application Data Issuer Script Results Terminal Capabilities Terminal Type TVR Table 21: ICC-specific Reversal Data Elements Present if Terminal Identifier does not implicitly refer to IFD Serial Number Present if provided by ICC in GENERATE AC command response Present if script commands to ICC are delivered by terminal Condition
Page 104
May 2004
Table 22 contains existing data elements necessary for an ICC transaction. Data Element Acquirer Identifier Condition Present for Terminal Type = '1x' or '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single acquirer Present if not in Track 2 Equivalent Data Present if not in Track 2 Equivalent Data Present if in ICC
Application Expiration Date Application PAN Application PAN Sequence Number Authorisation Response Code Merchant Category Code
Present for Terminal Type = '2x' if Merchant Identifier or Terminal Identifier does not implicitly refer to a single merchant category Present for Terminal Type = '2x' if Terminal Identifier does not implicitly refer to a single merchant Present if available at terminal Present if Terminal Identifier or IFD Serial Number does not implicitly refer to a single terminal country Present if in ICC Present if Merchant Identifier or Terminal Identifier does not implicitly refer to a single transaction currency accepted at point of transaction Present if Terminal Type = 'x2', 'x3', 'x5', or 'x6'
Merchant Identifier
Original Data Elements POS Entry Mode Terminal Country Code
Terminal Identifier Track 2 Equivalent Data Transaction Amount Transaction Currency Code
Transaction Date Transaction Time Transaction Type Table 22: Existing Reversal Data Elements
May 2004
Page 105
12 Acquirer Interface 12.2 Exception Handling
12.2 Exception Handling

This section describes exception conditions that may occur during real-time authorisation, financial transaction, or online advice and the associated actions the terminal shall perform. In this section, the term authorisation applies to authorisation messages as well as financial transaction messages.
12.2.1
Unable to Go Online
During transaction processing, the terminal may send an authorisation request to the acquirer due to at least one of the following conditions: Online-only terminal type Attendant action (for example, merchant suspicious of cardholder) Terminal risk management parameters set by the acquirer Terminal action analysis in comparing TVR with Issuer Action Code - Online and Terminal Action Code - Online (see Book 3 section 10.7) Card action analysis via its response to the first GENERATE AC command: CID indicates ARQC returned (see Book 3) If the terminal is unable to process the transaction online, as described in Book 3, the terminal shall compare the TVR with both Terminal Action Code Default and Issuer Action Code - Default to determine whether to accept or decline the transaction offline and shall issue the second GENERATE AC command to the ICC indicating its decision: If the terminal accepts the transaction, it shall set the Authorisation Response Code to Unable to go online, offline accepted. If the terminal declines the transaction, it shall set the Authorisation Response Code to Unable to go online, offline declined. The result of card risk management performed by the ICC is made known to the terminal through the return of the CID indicating either a TC for an approval or an AAC for a decline.
Page 106
May 2004
12.2.2
Downgraded Authorisation
When the authorisation response received by the terminal does not contain the Issuer Authentication Data, the terminal shall not execute the EXTERNAL AUTHENTICATE command and shall set the Issuer authentication was performed bit in the Transaction Status Information (TSI) to 0, as described in Book 3. The terminal shall continue processing based on the Authorisation Response Code returned in the response message as described in section 6.3.6.
Note: If the acquirer or the intermediate network is unable to support ICC messages, the terminal should send messages compliant with current payment system specifications. Payment systems will determine compliance requirements for message content.
May 2004
Page 107
12.2.3
Authorisation Response Incidents
The authorisation response may not be correctly received by the terminal. The following incidents may occur: Response not received or received too late (for example, network failure, time-out) Response with invalid format or syntax Request not received by the authorisation host (for example, network failure) After repeat(s)18, if any, of the authorisation request, the terminal shall process the transaction as being unable to go online. As described in Book 3, the terminal shall compare the TVR with both Terminal Action Code - Default and Issuer Action Code - Default to determine whether to accept or decline the transaction offline and shall issue the second GENERATE AC command to the ICC indicating its decision: If the terminal accepts the transaction, it shall set the Authorisation Response Code to Unable to go online, offline accepted. If the terminal declines the transaction, it shall set the Authorisation Response Code to Unable to go online, offline declined. The result of card risk management performed by the ICC is made known to the terminal through the return of the CID indicating either a TC for an approval or an AAC for a decline. When online data capture is performed by the acquirer, the terminal shall send a reversal message regardless of the final decision on the transaction (to ensure that if the authorisation host received a request and sent a response, the transaction is cancelled). If the transaction is finally approved offline (TC returned by the ICC), the terminal shall create a financial record to be forwarded to the acquirer.
Acquirers or networks may require that an authorisation request be repeated in the event that a valid response is not obtained. Requirements for such repeat(s) are outside the scope of EMV.
18
Page 108
May 2004
12.2.4
Script Incidents
The Issuer Script may not be correctly processed. The following incidents may occur: Script length error: The response message contains one (or more) Issuer Script(s) whose cumulative total length is larger than the script length supported by the network or terminal. Script with incorrect format or syntax: The terminal is unable to correctly parse the Issuer Script(s) into single Script Commands, as specified in Book 3. If either of these incidents occurs, the terminal shall terminate the processing of the Issuer Script in which the incident occurred, shall read if possible the Script Identifier (when present) and shall report it as not performed in the Issuer Script Results of the financial transaction confirmation or batch data capture message. The terminal shall continue processing any subsequent Issuer Script. Book 3, Annex E gives some examples of TVR and TSI bit setting following script processing.
12.2.5
Advice Incidents
If the terminal is unable to create an advice when requested by the card in the CID returned in the response to the GENERATE AC command as described in section 6.3.7, the terminal shall terminate the transaction.
May 2004
Page 109
Page 110
May 2004
Part V Annexes
May 2004
Page 111
Page 112
May 2004
Annex A
Coding of Terminal Data Elements
This annex provides the coding for the Terminal Type, Terminal Capabilities, Additional Terminal Capabilities, CVM Results, Issuer Script Results, and Authorisation Response Code. Coding of data (bytes or bits) indicated as RFU shall be '0'. Neither the terminal nor the card shall check the data indicated as RFU.
A1
Terminal Type
Operational Control Provided By: Environment Financial Institution 11 12 13 14 15 16 Table 23: Terminal Type Merchant Cardholder
19
Attended Online only Offline with online capability Offline only Unattended Online only Offline with online capability Offline only 24 25 26 34 35 36 21 22 23
Terminal Types '14', '15', and '16' with cash disbursement capability (Additional Terminal Capabilities, byte 1, cash bit = 1) are considered to be ATMs. All other Terminal Types are not considered to be ATMs.
19 For the purpose of this specification, an attended cardholder-controlled terminal is considered to be a nonexistent category.
May 2004
Page 113
Annex A Coding of Terminal Data Elements A2 Terminal Capabilities
Examples of terminal types are: Attended and controlled by financial institution: Branch terminal Attended and controlled by merchant: Electronic cash register, portable POS terminal, stand-alone POS terminal, host concentrating POS terminal Unattended and controlled by financial institution: ATM, banking automat Unattended and controlled by merchant: Automated fuel dispenser, pay telephone, ticket dispenser, vending machine Unattended and controlled by cardholder: Home terminal, personal computer, screen telephone, Payphones, Digital interactive Television / Set Top Boxes. See Annex E for more detailed examples.
A2
Terminal Capabilities
This section provides the coding for Terminal Capabilities: Byte 1: Card Data Input Capability Byte 2: CVM Capability Byte 3: Security Capability In the tables: A 1 means that if that bit has the value 1, the corresponding Meaning applies. An x means that the bit does not apply. b8 1 x x x x x x x b7 x 1 x x x x x x b6 x x 1 x x x x x b5 x x x 0 x x x x b4 x x x x 0 x x x b3 x x x x x 0 x x b2 x x x x x x 0 x b1 x x x x x x x 0 Meaning Manual key entry Magnetic stripe IC with contacts RFU RFU RFU RFU RFU
Table 24: Terminal Capabilities Byte 1 - Card Data Input Capability
Page 114
May 2004
Annex A Coding of Terminal Data Elements A2 Terminal Capabilities
b8 1 x x x x x x x
b7 x 1 x x x x x x
b6 x x 1 x x x x x
b5 x x x 1 x x x x
b4 x x x x 1 x x x
b3 x x x x x 0 x x
b2 x x x x x x 0 x
b1 x x x x x x x 0
Meaning Plaintext PIN for ICC verification Enciphered PIN for online verification Signature (paper) Enciphered PIN for offline verification No CVM Required RFU RFU RFU
Table 25: Terminal Capabilities Byte 2 - CVM Capability If the terminal supports a CVM of signature, the terminal shall be an attended terminal (Terminal Type = 'x1', 'x2', or 'x3') and shall support a printer (Additional Terminal Capabilities, byte 4, Print, attendant bit = 1). b8 1 x x x x x x x b7 x 1 x x x x x x b6 x x 1 x x x x x b5 x x x 0 x x x x b4 x x x x 1 x x x b3 x x x x x 0 x x b2 x x x x x x 0 x b1 x x x x x x x 0 SDA DDA Card capture RFU CDA RFU RFU RFU Meaning
Table 26: Terminal Capabilities Byte 3 - Security Capability
May 2004
Page 115
Annex A Coding of Terminal Data Elements A3 Additional Terminal Capabilities
A3
Additional Terminal Capabilities
This section provides the coding for Additional Terminal Capabilities: Byte 1: Transaction Type Capability Byte 2: Transaction Type Capability Byte 3: Terminal Data Input Capability Byte 4: Terminal Data Output Capability Byte 5: Terminal Data Output Capability In the tables: A 1 means that if that bit has the value 1, the corresponding meaning applies. An x means that the bit does not apply. b8 1 x x x x x x x b7 x 1 x x x x x x b6 x x 1 x x x x x b5 x x x 1 x x x x b4 x x x x 1 x x x b3 x x x x x 1 x x b2 x x x x x x 1 x b1 x x x x x x x 1 Cash Goods Services Cashback Inquiry 20 Transfer 21 Payment 22 Administrative Meaning
Table 27: Addl Term. Capabilities Byte 1 - Transaction Type Capability
For the purpose of this specification, an inquiry is a request for information about one of the cardholders accounts.
20
For the purpose of this specification, a transfer is a movement of funds by a cardholder from one of its accounts to another of the cardholders accounts, both of which are held by the same financial institution.
21 22 For the purpose of this specification, a payment is a movement of funds from a cardholder account to another party, for example, a utility bill payment.
Page 116
May 2004
b8 1 x x x x x x x
b7 x 0 x x x x x x
b6 x x 0 x x x x x
b5 x x x 0 x x x x
b4 x x x x 0 x x x
b3 x x x x x 0 x x
b2 x x x x x x 0 x
b1 x x x x x x x 0 RFU RFU RFU RFU RFU RFU RFU
Meaning Cash Deposit 23
Table 28: Addl Term. Capabilities Byte 2 - Transaction Type Capability b8 1 x x x x x x x b7 x 1 x x x x x x b6 x x 1 x x x x x b5 x x x 1 x x x x b4 x x x x 0 x x x b3 x x x x x 0 x x b2 x x x x x x 0 x b1 x x x x x x x 0 Meaning Numeric keys Alphabetic and special characters keys Command keys Function keys RFU RFU RFU RFU
Table 29: Addl Term. Capabilities Byte 3 - Terminal Data Input Capability
A cash deposit is considered to be a transaction at an attended or unattended terminal where a cardholder deposits cash into a bank account related to an application on the card used.
23
May 2004
Page 117
b8 1 x x x x x x x
b7 x 1 x x x x x x
b6 x x 1 x x x x x
b5 x x x 1 x x x x
b4 x x x x 0 x x x
b3 x x x x x 0 x x
b2 x x x x x x 1 x
b1 x x x x x x x 1
Meaning Print, attendant Print, cardholder
24
Display, attendant Display, cardholder RFU RFU Code table 10 Code table 9
Table 30: Addl Term. Capabilities Byte 4 - Term. Data Output Capability The code table number refers to the corresponding part of ISO/IEC 8859. b8 1 x x x x x x x b7 x 1 x x x x x x b6 x x 1 x x x x x b5 x x x 1 x x x x b4 x x x x 1 x x x b3 x x x x x 1 x x b2 x x x x x x 1 x b1 x x x x x x x 1 Meaning Code table 8 Code table 7 Code table 6 Code table 5 Code table 4 Code table 3 Code table 2 Code table 1
Table 31: Addl Term. Capabilities Byte 4 - Term. Data Output Capability The code table number refers to the corresponding part of ISO/IEC 8859.
If the terminal is attended (Terminal Type = x1, x2, or x3) and there is only one printer, the Print, attendant bit shall be set to 1 and the Print, cardholder bit shall be set to 0.
24
If the terminal is attended and there is only one display, the Display, attendant bit shall be set to 1 and the Display, cardholder bit shall be set to 0. If the terminal is unattended (Terminal Type = x4, x5, or x6), the Print, attendant and Display, attendant bits shall be set to 0.
Page 118
May 2004
Annex A Coding of Terminal Data Elements A4 CVM Results
A4
Byte 1
CVM Results
CVM Performed Last CVM of the CVM List actually performed by the terminal: One-byte CVM Code of the CVM List as defined in Book 3 ('3F' if no CVM is performed) One-byte CVM Condition Code of the CVM List as defined in Book 3 Result of the (last) CVM performed as known by the terminal: '0' = Unknown (for example, for signature) '1' = Failed (for example, for offline PIN) '2' = Successful (for example, for offline PIN) Table 32: CVM Results
Byte 2 Byte 3
CVM Condition CVM Result
A5
Byte 1
Issuer Script Results

Script Result Most significant nibble: Result of the Issuer Script processing performed by the terminal: '0' = Script not performed '1' = Script processing failed '2' = Script processing successful Least significant nibble: Sequence number of the Script Command '0' = Not specified '1' to 'E' = Sequence number from 1 to 14 'F' = Sequence number of 15 or above Script Identifier of the Issuer Script received by the terminal, if available, zero filled if not. Mandatory if more than one Issuer Script was received by the terminal. Table 33: Issuer Script Results
Bytes 2-5
Script Identifier
Bytes 15 are repeated for each Issuer Script processed by the terminal.
May 2004
Page 119
Annex A Coding of Terminal Data Elements A6 Authorisation Response Code
A6
Authorisation Response Code
When transmitted to the card, the Authorisation Response Code obtained from the authorisation response message shall include at least the following: Online approved Online declined Referral (initiated by issuer) Capture card In addition, the terminal shall be able to generate and transmit to the card the new response codes listed in Table 34 when transactions are not authorised online: Authorisation Response Code Offline approved Offline declined Approval (after card-initiated referral) Decline (after card-initiated referral) Unable to go online, offline approved Unable to go online, offline declined Table 34: Authorisation Response Codes The terminal shall never modify the Authorisation Response Code returned in the response message.25 Value Y1 Z1 Y2 Z2 Y3 Z3
25 The cards final decision is reflected in the Cryptogram Information Data and not in the Authorisation Response Code.
Page 120
May 2004
Annex B
Common Character Set
Table 35 shows the character set common to all parts of ISO/IEC 8859: b8 0 b7 b6 b5 b4 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 b3 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 b2 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 b1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 1 1 1
00 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
01
02 SP ! # $ % & ( ) * + , . /
03 0 1 2 3 4 5 6 7 8 9 : ; < = > ?
04 @ A B C D E F G H I J K L M N O
05 P Q R S T U V W X Y Z [ \ ] ^ _
06 ` a b c d e f g h i j k l m n o
07 p q r s t u v w x y z { | } ~
Table 35: Common Character Set
May 2004
Page 121
Annex B Common Character Set
The following is an example of the use of the common character set to display the APPROVED message in French without supporting the part of ISO/IEC 8859 that allows the relevant diacritic marks to be displayed. If the terminal supports Part 1 of ISO/IEC 8859 (the Latin 1 alphabet) and supports the display of the standard messages in French, when a card indicates in its Language Preference that French is the preferred language, the terminal can display the APPROVED message as ACCEPT, using the appropriate diacritic marks. If the terminal does not support Part 1 of ISO/IEC 8859 (the Latin 1 alphabet) but supports Part 8 (the Hebrew alphabet), the terminal is still able to support the display of the standard messages in French by using the common character set. When a card indicates in its Language Preference that French is the preferred language, the terminal can display the APPROVED message as ACCEPTE, without the use of diacritic marks. The cardholder should be able to comprehend the message.
Page 122
May 2004
Annex C
Example Data Element Conversion
For the data elements listed in section 12.1, Table 36 illustrates an example of the relationship between: the ICC-related data described in Book 3 and the terminal-related data described in this specification the data transmitted in messages as defined in ISO 8583:1987 and bit 55 from ISO 8583:1993 This does not imply that ISO 8583 is required as the message standard. Tag ICC Data Bit 32 4 30 Message Data Name Acquiring Institution Identification Code Amount, Transaction (authorisation) Amount, Original Transaction (batch data capture, financial transaction) Additional Amounts '9F01' Acquirer Identifier '9F02' Amount, Authorised or '81'
'9F04' Amount, Other or '9F03' '9F26' Application Cryptogram '5F25' Application Effective Date '5F24' Application Expiration Date '82' '5A' Application Interchange Profile Application PAN
54
55 14 55 2 23 55 55
ICC System-Related Data Date, Expiration (YYMM only) ICC System-Related Data PAN Card Sequence Number ICC System-Related Data ICC System-Related Data
see note Date, Effective (YYMM only)
'5F34' Application PAN Sequence Number '9F36' Application Transaction Counter '9F07' Application Usage Control
Note: Only defined in ISO 8583:1993
Table 36: Data Element Conversion
May 2004
Page 123
Annex C Example Data Element Conversion
Tag '89' '8A' '8E'
ICC Data Authorisation Code Authorisation Response Code CVM List Enciphered PIN Data
Bit 38 39 55 55 55 52
Message Data Name Authorisation Identification Response Response Code ICC System-Related Data ICC System-Related Data ICC System-Related Data PIN Data
'9F27' Cryptogram Information Data '9F34' CVM Results '9F1E' IFD Serial Number '9F0D' Issuer Action Code - Default '9F0E' Issuer Action Code - Denial '9F0F' Issuer Action Code - Online '9F10' Issuer Application Data '91' Issuer Authentication Data '5F28' Issuer Country Code '71' or Issuer Script Template 1 or 2 '72' Issuer Script Results '9F15' Merchant Category Code '9F16' Merchant Identifier '9F39' POS Entry Mode '5F30' Service Code '9F33' Terminal Capabilities
see note Card Accepting Device (CAD) Management 55 55 55 55 55 20 55 55 18 42 22 40 ICC System-Related Data ICC System-Related Data ICC System-Related Data ICC System-Related Data ICC System-Related Data Country Code, PAN Extended ICC System-Related Data ICC System-Related Data Merchant Type Card Acceptor Identification POS Entry Mode (pos. 12) Service Code
see note CAD Management
Table 36: Data Element Conversion, continued

Note: Only defined in additional/private data element of ISO 8583:1987 or ISO 8583:1993
Page 124
May 2004
Tag
ICC Data
Bit 19 43
Message Data Name Acquiring Institution Country Code Card Acceptor Name/Location (if terminal/acquirer countries are different) Card Acceptor Terminal Identification ICC System-Related Data Track 2 Data Amount, Transaction Currency Code, Transaction Date, Local Transaction (MMDD only) Time, Local Transaction Processing Code (pos. 12) ICC System-Related Data
'9F1A' Terminal Country Code
'9F1C' Terminal Identification '9F35' Terminal Type '95' '57' '9A' TVR Track 2 Equivalent Data Transaction Amount Transaction Date
41
see note CAD Management 55 35 4 49 13 12 3 55
'5F2A' Transaction Currency Code
'9F21' Transaction Time '9C' Transaction Type '9F37' Unpredictable Number
Table 36: Data Element Conversion, continued

Note: Only defined in additional/private data element of ISO 8583:1987 or ISO 8583:1993
May 2004
Page 125
Page 126
May 2004
Annex D
D1
Informative Terminal Guidelines
Terminal Usage
Because terminals are installed in a variety of environments and locations, it is recognised that throughout the world different attempts have been made to group relevant guidelines into different categories: Climatic conditions where the terminal is used (climate controlled, outdoor, indoor) Mechanical conditions (such as vibration, shocks, drop-tests) Electronic restrictions (such as isolation, security, penetration) The guidelines have been documented in industry standards established in Europe and the United States (see Annex D5 for informative references).
D2
D2.1
Power Supply
External Power Supply
The power supply provides the required voltage and current to all components of the terminal. The power supply should comply with the relevant national safety regulations.
D2.2
Battery Requirements
An internal battery is used to prevent loss of sensitive data residing in the terminal in case of power supply breakdown. For portable terminals, the battery supports necessary terminal functions (see Book 1 for power/current requirements). Power consumption can be reduced by energising the terminal automatically at card insertion.
May 2004
Page 127
Annex D Informative Terminal Guidelines D3 Keypad
D3
Keypad
To prevent characters printed on the keys of the keypad from becoming illegible after a while, precautions should be taken so that they: have wear-resistant lettering are able to function in normal operating environment including resistance to soft drink spills, alcohol, detergents, gasoline, etc. when operated as outdoor terminals, can resist the temperature ranges commonly encountered
D4
Display
To cater for visually disabled people, characters on the display are visible in all lighting conditions (bright overhead or dim diffuse light) and the size of the characters is large enough to be read from a distance of 1 meter.
D5
Informative References
Safety of information technology equipment, including electrical business equipment, second edition. (Amendment 1-1992) (Amendment 2-1993) Electromagnetic compatibility for industrial-process measurement and control equipment Part 2: Electrostatic discharge requirements, second edition Electromagnetic compatibility for industrial-process measurement and control equipment Part 3: Radiated electromagnetic field requirements, first edition Electromagnetic compatibility for industrial-process measurement and control equipment Part 4: Electrical fast transient/burst requirements, first edition Basic environmental testing procedures Part 2: Tests test Sa: Simulated solar radiation at ground level, first edition
IEC 950:1991
IEC 801-2:1991
IEC 802-3:1984
IEC 801-4:1988
IEC 68-2-5:1975
Page 128
May 2004
Annex D Informative Terminal Guidelines D5 Informative References
IEC 68-2-6:1982
Basic environmental testing procedures Part 2: Tests test Fc and guidance: Vibration (sinusoidal), fifth edition. (Amendment 1: 1983) (Amendment 2: 1985) Basic environmental testing procedures Part 2: Tests test Ka: Salt mist, third edition Basic environmental testing procedures Part 2: Tests Guidance for damp heat tests, third edition Basic environmental testing procedures Part 2: Tests test Ed: Free fall, second edition. (Amendment 2-1990 incorporating Amendment 1) Safety of information technology equipment including electrical business equipment Particular safety requirements for equipment to be connected to telecommunication networks Safety of information technology equipment including electrical business equipment Degrees of protection provided by enclosure (IP code) Financial transaction terminals 26 Telephone and telematic equipment. Electromagnetic compatibility
IEC 68-2-11:1981 IEC 68-2-27:1987
IEC 68-2-32:1975
EN 60-950:1988 EN 41003:1993 UL 1950:1993 NF C 20-010:1992 NF C 98-310:1989 NF C 98-020:1986
26
This standard applies only to stand-alone terminals.
May 2004
Page 129
Annex D Informative Terminal Guidelines D5 Informative References
Page 130
May 2004
Annex E Examples of Terminals

For informational purposes only, this annex provides some examples of the physical and functional characteristics of terminals. Each example describes the setting of Terminal Type, Terminal Capabilities, and Additional Terminal Capabilities according to the specific terminal characteristics. This annex does not establish any requirements as such.
May 2004
Page 131
E1
Example 1 - POS Terminal or Electronic Cash Register

Characteristics Example 1 Attendant keypad (numeric and function keys) + PIN pad One for attendant One for cardholder Yes for attendant Yes Yes Supports Part 1 of ISO/IEC 8859 Goods, cashback Yes Offline PIN, signature No Yes Yes
Physical: Keypad Display Printer Magnetic stripe reader IC reader Functional: Language selection Transaction type SDA Cardholder verification Card capture Online capable Offline capable
Table 37: Example of POS Terminal or Electronic Cash Register The coding of the terminal-related data for this example is the following: Terminal Type = '22' Terminal Capabilities, byte 1 = 'E0' (hexadecimal) byte 2 = 'A0' (hexadecimal) byte 3 = '80' (hexadecimal) byte 1 = '50' (hexadecimal) byte 2 = '00' (hexadecimal) byte 3 = 'B0' (hexadecimal) byte 4 = 'B0' (hexadecimal) byte 5 = '01' (hexadecimal)
Additional Terminal Capabilities,
Page 132
May 2004
E2
Example 2 - ATM
Characteristics Example 2 PIN pad + function keys Yes for cardholder Yes for cardholder Yes Yes Supports Part 5 of ISO/IEC 8859 Cash, inquiry, transfer, payment Yes Offline PIN, online PIN Yes Yes No Table 38: Example of ATM
The coding of the terminal-related data for this example is the following: Terminal Type = '14' Terminal Capabilities, byte 1 = '60' (hexadecimal) byte 2 = 'C0' (hexadecimal) byte 3 = 'A0' (hexadecimal) byte 1 = '8E' (hexadecimal) byte 2 = '00' (hexadecimal) byte 3 = 'B0' (hexadecimal) byte 4 = '50' (hexadecimal) byte 5 = '05' (hexadecimal)
May 2004
Page 133
E3
Example 3 - Vending Machine

Characteristics Example 3 Function keys No No Yes Yes No Goods Yes No No No Yes Table 39: Example of Vending Machine
The coding of the terminal-related data for this example is the following: Terminal Type = '26' Terminal Capabilities, byte 1 = '60' (hexadecimal) byte 2 = '00' (hexadecimal) byte 3 = '80' (hexadecimal) byte 1 = '40' (hexadecimal) byte 2 = '00' (hexadecimal) byte 3 = '10' (hexadecimal) byte 4 = '00' (hexadecimal) byte 5 = '00' (hexadecimal)
Page 134
May 2004
Index
The index includes entries from all four Books. The page number prefix indicates the Book in which the entry appears.
AFL........................................................................... .1:136, 2:43, 2:57, 3:63-64, 3:78, 3:81, 3:95-96, 3:98, 3:127 AID . 1:122, 1:135, 2:54, 3:37, 3:127, 3:129, 3:143 AIP ...........2:43, 2:49, 2:57, 3:63-64, 3:80-83, 3:85, 3:93-94, 3:97-98, 3:103, 3:107, 3:117-118, 3:127 Coding....................................................... 3:160 Algorithm Application Cryptogram Generation ........... 2:87 DES ........................................................... 2:136 RSA........................................................... 2:140 SHA-1 ....................................................... 2:142 Amount .......................................................... 3:145 Amount Entry and Management ...................... 4:52 Amount, Authorised....................................... 3:104 Answer to Reset ............................................... 1:69 Basic............................................................ 1:70 Character Definitions .................................. 1:72 Characters Returned by ICC........................ 1:70 Flow at the Terminal ................................... 1:85 Physical Transportation of Characters Retd........ ................................................................ 1:69 Terminal Behaviour..................................... 1:83 API ................................................................. 3:128 Application Authentication Cryptogram .. See AAC Application Authorisation Referral .......... See AAR APPLICATION BLOCK ................................. 3:49 Application Cryptogram2:68, 2:85, 3:49, 3:56, 3:58, 3:80, 3:117, 3:126 and Issuer Authentication............................ 2:85 Generation Algorithm ............................................... 2:87 Data Selection......................................... 2:86 Key Management ........................................ 2:89 MAC Chaining ............................................ 2:95 Application Cryptogram Master Key ............... 2:87 Application Currency Code......3:103, 3:104, 3:126, 3:128, 3:146, 3:163 Application Currency Exponent..................... 3:126 Application Definition File .......................See ADF Application Dependent Data ............................ 4:79 Application Discretionary Data...................... 3:126 Application Effective Date.................. 3:102, 3:126 Application Elementary File ......1:121, 1:122, 3:37, 3:38, 3:142, 3:158 Application Expiration Date ......3:78, 3:102, 3:126 Application File Locator ........................... See AFL Application Identifier .................................See AID Application Independent Data.......................... 4:78 Application Independent ICC to Terminal Interface Requirements ................ 4:43
1PAY.SYS.DDF01 ............................. 1:137, 1:142 '60' . ................................................................ 1:91 '61' . ............................................................... 1:91 '6C' . ............................................................... 1:91
A
AAC ................................................................. 2:85 AAR ................................................................. 2:85 Abbreviations ........................1:19, 2:21, 3:19, 4:21 Abnormal Termination of Transaction Process 1:64 Abort Request ................................................ 1:104 AC.............................. See Application Cryptogram Accept an ATR................................................. 1:73 ACK ................................................................. 1:95 Acknowledged................................................ 1:101 Acquirer Identifier............................... 3:125, 3:140 Acquirer Interface Exception Handling................................... 4:106 Advice Incidents................................... 4:109 Authorisation Response Incidents ........ 4:108 Downgraded Authorisation................... 4:107 Script Incidents..................................... 4:109 Unable to Go Online............................. 4:106 Message Content ......................................... 4:91 Authorisation Request ............................ 4:93 Authorisation Response.......................... 4:97 Batch Data Capture................................. 4:99 Financial Transaction Confirmation ....... 4:98 Financial Transaction Request................ 4:95 Financial Transaction Response ............. 4:97 Online Advice....................................... 4:102 Reconciliation....................................... 4:101 Reversal ................................................ 4:104 Additional Terminal Capabilities ................... 3:125 Terminal Data Input Capability................. 4:117 Terminal Data Output Capability .............. 4:118 Transaction Type Capability .......... 4:116, 4:117 Additional Work Waiting Time........................ 1:91 ADF ............................................................... 1:121 Directory Entry Format ............................. 1:139 Advice Incidents ............................................ 4:109 Advice Messages............................................ 3:116 AEF......................See Application Elementary File
May 2004
Page 135
Index

Basic Response Coding Character T0 ................................................1:74 Character TA3 .............................................1:81 Character TB1..............................................1:76 Character TB3..............................................1:82 Character TC1..............................................1:77 Character TD1 .............................................1:78 Character TD2 .............................................1:80 Batch Data Capture...........................................4:99 Battery Requirements .....................................4:127 BER-TLV Data Objects..................................3:155 BIC ..................................See Bank Identifier Code Bit Duration......................................................1:65 Bit Rate Adjustment Factor ..............................1:75 Bit Synchronisation ..........................................1:73 Block Protocol T=1 ................................ 1:87, 1:94 Block Frame Structure .................................1:94 Chaining ....................................................1:101 Error Detection and Correction..................1:104 Error Free Operation..................................1:100 Information Field Sizes and Timings...........1:98 Blocks, Types ...................................................1:95 Body ...............................................................1:127 Building Candidate List for Application Selection.................................1:140 BWI ........................................................ 1:74, 1:82 BWT ............................................ 1:82, 1:99, 1:101 BWT Time-out ...............................................1:104
Application Interchange Profile..................See AIP Application Label ................... 1:133, 1:145, 3:127 Application Layer ................................. 1:87, 1:115 C-APDU ....................................................1:116 R-APDU ....................................................1:117 Application PAN ......................... 2:63, 2:97, 2:134 Application PAN Sequence Number .... 2:97, 2:134 Application Preferred Name1:145, 3:127, 3:137 Application Primary Account Number (PAN). 3:78, 3:128 Application Priority Indicator............. 1:148, 3:128 Format........................................................1:139 Application Selection ........................... 1:135, 4:89 Building Candidate List.............................1:140 Final Selection ...........................................1:148 List of AIDs Method..................................1:145 PSE Method...............................................1:142 Using Data in ICC .....................................1:136 Application Selection Indicator ..................See ASI Application Specification .................................4:43 Application Template ... 1:122, 1:138, 1:158, 3:129 Application Transaction Counter.............. See ATC APPLICATION UNBLOCK ............................3:51 Application Usage Control ...... 3:100, 3:101, 3:129 Coding .......................................................3:161 Application Version Number.............. 3:100, 3:129 ARC...................See Authorisation Response Code ARPC ...............................................................2:85 ARPC Methods for Issuer Authentication Method 1......................................................2:87 Method 2......................................................2:88 ARQC............................................ 2:85, 2:87, 2:88 ASI .....................................................1:143, 1:146 Assignment of Contacts .......................... 1:39, 1:48 Asynchronous Half Duplex ..............................1:65 ATC .....2:87, 2:97, 2:130, 2:131, 2:151, 3:58, 3:61, 3:80, 3:82, 3:110, 3:129, 3:139 ATR ........................................ See Answer to Reset AUC.............................. 3:100, 3:101, 3:129, 3:161 Authorisation Code.........................................3:130 Authorisation Request ......................................4:93 Authorisation Request Cryptogram ....... See ARQC Authorisation Response....................................4:97 Authorisation Response Code ..... 2:87, 3:92, 3:130 Coding .......................................................4:120 Authorisation Response Cryptogram......See ARPC Authorisation Response Incidents ..................4:108
C
CA Private Key.................................................2:37 CA Public Key..................................................2:37 C-APDU ............................................... 1:90, 1:116 Chaining ....................................................1:103 Content ......................................................1:126 Format........................................................1:126 Structure ....................................................1:126 Structures...................................................1:116 Card Action Analysis............................ 3:115, 4:49 CARD BLOCK.................................................3:52 Card Reading....................................................4:55 Exception Handling .....................................4:56 IC Reader.....................................................4:56 Card Risk Management Data Object List 1 .............. .........................................................See CDOL1 Card Risk Management Data Object List 2 .............. .........................................................See CDOL2 Card Session Stages..........................................1:59 Card Status Update ....................................See CSU Cardholder and Attendant Interface Application Selection...................................4:89 Language Selection......................................4:85 Standard Messages.......................................4:86 Cardholder Name............................................3:131
B
Bank Identifier Code ......................................3:130 Basic ATR .............................................. 1:70, 1:72 Basic ATR for T=0 Only ..................................1:70 Basic ATR for T=1 Only ..................................1:71 Basic Response.................................................1:72
Note: The index includes entries from all four Books. The page number prefix indicates the Book in which the entry appears. Page 136 May 2004

Cardholder Verification ...........................See CVM Cardholder Verification Method ..............See CVM Cases for Data in APDUs............................... 1:115 CCD ........................See Common Core Definitions CDA ....................................2:49, 2:68, 3:98, 3:160 Dynamic Signature Generation ................... 2:68 Dynamic Signature Verification .................. 2:72 Keys and Certificates................................... 2:53 Retrieval of Certification Authority Public Key .............................................. 2:57 Retrieval of ICC Public Key........................ 2:61 Retrieval of Issuer Public Key..................... 2:58 Sample Flow................................................ 2:75 CDOL1..............2:68, 2:74, 3:38, 3:90, 3:91, 3:130 CDOL2................................2:68, 2:74, 3:38, 3:130 Certificate Expiration Date.............2:46, 2:60, 2:63 Certificate Serial Number........................ 2:46, 2:60 Certificates and Keys DDA and CDA ............................................ 2:53 PIN Encipherment....................................... 2:80 SDA............................................................. 2:40 Certification Authority .......................... 2:37, 2:101 Certification Authority Private Key ........ 2:40, 2:53 Certification Authority Public Key ........................... ............................2:39, 2:52, 2:58, 2:121, 2:140 Compromise .............................................. 2:103 Key Management Requirements................ 2:121 Life Cycle.................................................... 2:99 Management Principles and Policies........... 2:99 Retrieval for DDA and CDA ....................... 2:57 Retrieval for SDA........................................ 2:43 Usage......................................................... 2:123 Certification Authority Public Key Algorithm Indicator................................... 2:122 Certification Authority Public Key Check Sum ................................................ 2:122 Certification Authority Public Key Exponent .................................2:40, 2:53, 2:140 Certification Authority Public Key Index .......................................2:43, 2:52, 2:122 Certification Authority Public Key Modulus ............................................. 2:40, 2:53 Certification Authority Public Key Sample Timelines ...................................... 2:114 Chaining......................................................... 1:101 C-APDU.................................................... 1:103 I-blocks........................................... 1:101, 1:103 Character .......................................................... 1:93 Character Definitions ....................................... 1:72 Character Frame .............................1:66, 1:87, 1:88 Character Protocol T=0 ........................... 1:87, 1:89 Character Timing......................................... 1:89 Command Header........................................ 1:90 Command Processing .................................. 1:90 Example Exchanges .................................. 1:153 Transportation of C-APDUs........................ 1:92 Character Repetition ........................................ 1:93
Index
Character Set .................................................. 4:121 Characters Returned by ICC at Answer to Reset....... .................................................................... 1:70 Check Character TCK ...................................... 1:83 CID..................... 2:71, 2:74, 3:58-59, 3:116, 3:132 CLA....................................................... 1:90, 1:116 Class Byte ........................................................ 3:42 Classes of Operation ........................................ 1:45 Clock ICC Electrical Characteristics ..................... 1:43 Terminal Electrical Characteristics.............. 1:52 Clock Rate Conversion Factor ......................... 1:75 Coding Additional Terminal Capabilities .............. 4:116 Authorisation Response Code ................... 4:120 Terminal Capabilities ................................ 4:114 Terminal Data Elements ............................ 4:113 Terminal Type ........................................... 4:113 Coding Conventions......................................... 3:42 Coding PCB of I-block ......................................................... 1:96 R-block........................................................ 1:96 S-block ........................................................ 1:96 Cold Reset........................................................ 1:61 Command ...................................3:41, 3:132, 3:138 READ RECORD....................................... 1:127 SELECT .................................................... 1:129 Command APDU Structure.............................. 3:41 Command Application Protocol Data Unit ............... ...................................................... See C-APDU Command Class ............................................... 1:90 Command Data............................................... 1:115 Command Header............................................. 1:90 Command Keys ................................................ 4:60 Command Message Structure.............. 1:114, 1:125 Command Processing Qualifier (SW2) .......... 1:127 Command Processing Status (SW1)............... 1:127 Command Transport Protocol Data Unit................... ...................................................... See C-TPDU Command-Response Pair ............................... 1:115 Commands ....................................................... 3:48 APPLICATION BLOCK ............................ 3:49 APPLICATION UNBLOCK....................... 3:51 CARD BLOCK ........................................... 3:52 EXTERNAL AUTHENTICATE................. 3:54 GENERATE AC .......................2:68, 3:56, 3:87 GET CHALLENGE ........................... 2:83, 3:60 GET DATA ................................................. 3:61 GET PROCESSING OPTIONS .................. 3:63 GET PROCESSING OPTIONS .................. 2:69 INTERNAL AUTHENTICATE........................... ............................................2:64, 2:147, 3:65 PIN CHANGE/UNBLOCK......................... 3:67 READ RECORD......................................... 3:69 READ RECORD......................................... 2:54 VERIFY ...................................................... 3:71 VERIFY ...................................................... 2:83
Note: The index includes entries from all four Books. The page number prefix indicates the Book in which the entry appears. May 2004 Page 137
Index

Cryptogram Information Data.................... See CID Cryptogram Types ............................................3:56 Cryptographic Algorithms Asymmetric RSA Algorithm .....................................2:140 Hashing Secure Hash Algorithm (SHA-1) ..........2:142 Symmetric Data Encryption Standard (DES) ..........2:139 CSU ................................ 2:88, 3:187, 3:197, 3:199 C-TPDU............................................................1:90 Currency .........................................................3:128 Currency Code......................... 3:128, 3:146, 3:163 Currency exponent..........................................3:146 Current etu........................................................1:65 Current Requirement ICC Electrical Characteristics......................1:45 Terminal Electrical Characteristics ..............1:54 CV Rule Coding .......................................................3:162 CVM....3:71, 3:82, 3:103, 3:105-106, 3:131, 3:143, 3:162-163, 4:46 CVM Results ....................................................4:47 CWI ........................................................ 1:74, 1:82 CWT .................................................................1:82
Common Character Set...................................4:121 Common Core Definitions....... 1:169, 2:155, 3:181 Application Cryptogram Generation..........2:157 Card Action Analysis.................................3:196 Card Status Update ....................................3:207 Card Verification Results...........................3:205 Cardholder Verification .............................3:196 CDA...........................................................2:156 CID Coding ...............................................3:183 Coding Payment System Directory ............1:171 Common Core Identifier ............................3:203 Completion ................................................3:197 Data Elements............................................3:201 Data in ICC Used for Application Selection ...............................................1:171 Data Retrievable by GET DATA Command..............................................3:185 DDA ..........................................................2:155 Directory Structure ....................................1:170 Dynamic Signature Generation ...... 2:155, 2:156 Encipherment Session Key Derivation ......2:160 Encipherment/Decipherment .....................2:160 EXTERNAL AUTHENTICATE ...............3:182 Functions Used in Transaction Processing 3:197 GENERATE AC Command Coding .................................3:186 GENERATE AC........................................3:182 GENERATE AC Command Use ...............3:195 GET PROCESSING OPTIONS.................3:184 INTERNAL AUTHENTICATE ................3:184 Issuer Application Data ................. 3:203, 3:204 Issuer Authentication .................................2:158 Issuer-to-Card Script Processing ...............3:196 Key Management ........................... 2:158, 2:160 MAC Computation ....................................2:159 MAC Session Key Derivation....................2:159 PSE Structure.............................................1:171 Response APDU Format............................3:182 Secure Messaging for Confidentiality........2:160 Secure Messaging for Integrity and Authentication.......................................2:159 Secure Messaging Format..........................2:159 SELECT Command-Response APDUs .....1:170 Terminal Risk Management.......................3:196 Completion .....................................................3:122 Conditional Body ...........................................1:126 Conditions for Support of Functions ................4:51 Contact Activation Sequence ....................................1:60 Assignment ........................................ 1:39, 1:48 Deactivation Sequence.................................1:63 Force ............................................................1:48 Layout..........................................................1:39 Location............................................. 1:38, 1:47 Resistance .......................................... 1:46, 1:56 Country Code ..................................... 3:101, 3:137 Cryptogram....................... 3:56, 3:58, 3:111, 3:126
D
D . ......................................................... 1:74, 1:75 DAC................................................................3:133 DAD .................................................................1:94 Data Authentication Code .................... 2:48, 3:133 Data Byte ..........................................................1:66 Data Element ..................................................1:121 Data Element Conversion, Example ...............4:123 Data Element Format Conventions........................... ......................................... 1:29, 2:31, 3:29, 4:31 Data Elements Authorisation Request Existing ...................................................4:94 ICC-specific ............................................4:93 Batch Data Capture Existing .................................................4:100 ICC-specific ............................................4:99 Financial Transaction Confirmation Existing ...................................................4:98 ICC-specific ............................................4:98 Financial Transaction Request Existing ...................................................4:96 ICC-specific ............................................4:95 Online Advice Existing .................................................4:103 ICC-specific ..........................................4:102 Reconciliation Existing .................................................4:101

Response Existing................................................... 4:97 ICC-specific............................................ 4:97 Reversal Existing................................................. 4:105 ICC-specific.......................................... 4:104 Data Elements and Files................................... 3:35 Data Elements Dictionary .............................. 3:125 Data Elements Table ...................................... 1:157 Data Elements, Terminal................................ 4:113 Data Encryption Standard ......................... See DES Data Field Bytes............................................... 3:44 Data in ICC Used for Application Selection .. 1:136 Data Link Layer ...................................... 1:87, 1:88 Character Frame .......................................... 1:88 Data Management ............................................ 4:77 Application Dependent Data ....................... 4:79 Application Independent Data..................... 4:78 Data Object List (DOL).................................... 3:38 Data Objects..................................................... 3:36 Classes......................................................... 3:36 Data Selection Application Cryptogram Generation ........... 2:86 Data Transfer Rates ..................................... 1:75 Data, Application Dependent ........................... 4:79 Data, Application Independent......................... 4:78 Date Management ............................................ 4:57 DDA................................................................. 2:49 Dynamic Signature Generation ................... 2:64 Dynamic Signature Verification .................. 2:66 Keys and Certificates................................... 2:53 Retrieval of Certification Authority Public Key .............................................. 2:57 Retrieval of ICC Public Key........................ 2:61 Retrieval of Issuer Public Key..................... 2:58 DDF ................................1:121, 1:163, 3:37, 3:133 Directory Entry Format ............................. 1:138 DDOL ................ 2:64, 3:38, 3:65, 3:79, 3:133-134 Decipherment Symmetric Security Mechanisms .............. 2:128 Default DDOL.................................................. 2:64 Definitions.................................1:9, 2:11, 3:9, 4:11 Derivation Master Key ................................................ 2:134 Session Key............................................... 2:130 DES................................................................ 2:139 Destination Node Address........................ See DAD DF Name ..................................1:123, 1:145, 3:133 DI . ................................................................. 1:75 DIR................................................................. 1:122 Direct Logic Convention.................................. 1:73 Directory Definition File...........................See DDF Directory Definition File (DDF) Name .......... 3:133 Directory Definition File Name........... 3:133, 3:142 Directory Discretionary Template ....... 1:122, 3:133 Directory SFI.................................................. 1:140 Directory Structure......................................... 1:122
Index
Examples ................................................... 1:163 Display .................................................. 4:62, 4:128 Disputed Character........................................... 1:93 Downgraded Authorisation ............................ 4:107 Dynamic Data Authentication Data Object List ........ ..........................................................See DDOL Dynamic Signature Generation CDA ....................................................... 2:68 DDA ....................................................... 2:64 Verification CDA ....................................................... 2:72 DDA ....................................................... 2:66
E
EDC ...................................................... 1:97, 1:100 EDC Error ............................................. 1:97, 1:104 Electrical Characteristics, ICC ......................... 1:40 Clock ........................................................... 1:43 Contact Resistance ...................................... 1:46 Current Requirement ................................... 1:45 I/O Reception .............................................. 1:41 I/O Transmission ......................................... 1:42 Reset............................................................ 1:44 Temperature Range ..................................... 1:40 VCC ............................................................ 1:45 VPP ............................................................. 1:42 Electrical Characteristics, Terminal ................. 1:48 Clock ........................................................... 1:52 Contact Resistance ...................................... 1:56 Current Requirement ................................... 1:54 I/O Current Limit ........................................ 1:49 I/O Reception .............................................. 1:51 I/O Transmission ......................................... 1:50 Powering and Depowering .......................... 1:57 Reset............................................................ 1:53 Short Circuit Resilience .............................. 1:56 Temperature Range ..................................... 1:48 VCC ............................................................ 1:54 VPP ............................................................. 1:51 Electromechanical Interface ............................. 1:35 Elementary Time Unit ..................................See etu EMVCo Principles and Policies by Phase ..... 2:105 Encipherment Symmetric Security Mechanisms .............. 2:127 Encipherment Master Key................................ 2:97 Encipherment Session Key.................... 2:97, 2:149 Erroneous Data................................................. 3:81 Error Detection and Correction for T=0........... 1:93 Error Recovery............................................... 1:104 etu .................................................................... 1:65 Even Parity Checking Bit................................. 1:66 Exact Match ................................................... 1:146 Example of Data Element Conversion ........... 4:123
Index

Terminal Risk Management.......................3:107 Transaction Log .........................................3:169 Functional Requirements..................................4:43 Amount Entry and Management ..................4:52 Application Independent ICC to Terminal Interface ..................................................4:43 Application Specification Data Authentication ................................4:45 Application Specification ............................4:43 Card Action Analysis ..............................4:49 Cardholder Verification Processing ........4:46 CVM Results......................................4:47 Offline CVM ......................................4:46 Online CVM ......................................4:46 PIN Entry Bypass...............................4:47 Signature (Paper) ...............................4:47 Initiate Application Processing ...............4:44 Issuer-to-Card Script Processing.............4:50 Online Processing ...................................4:50 Processing Restrictions ...........................4:45 Terminal Action Analysis .......................4:48 Terminal Risk Management ....................4:48 Card Reading ...............................................4:55 Exception Handling ................................4:56 IC Reader ................................................4:56 Conditions for Support of Functions ...........4:51 Data Management ........................................4:57 Date Authentication .....................................4:57 Date Management ........................................4:57 Processing Restrictions................................4:57 Security and Key Management ....................4:43 Transaction Forced Acceptance ...................4:54 Transaction Forced Online...........................4:54 Transaction Sequence Counter ....................4:55 Unpredictable Number.................................4:55 Voice Referrals ............................................4:53 Functions Conditions for Support ................................4:51
Examples of Directory Structures ...................1:163 Examples of Exchanges Using T=0 ................1:153 Examples of Terminals ...................................4:131 Exception Handling ..................... 3:83, 4:56, 4:106 Advice Incidents ........................................4:109 Authorisation Response Incidents .............4:108 Downgraded Authorisation........................4:107 Script Incidents ..........................................4:109 Unable to Go Online..................................4:106 Exponent.........................................................3:128 EXTERNAL AUTHENTICATE ......................3:54 Status Words Returned ..............................3:177 External Power Supply ...................................4:127 Extra Guardtime ...............................................1:77
F
F ........................................................... 1:74, 1:75 FCI...................................................... 1:122, 3:134 FCI Issuer Discretionary Data ..... 3:35, 3:94, 3:134 FCI Template..................................................1:131 FI . ..................................................................1:75 File Control Information............................. See FCI File Referencing .............................................1:123 File Structure ..................................................1:121 Application Definition Files ......................1:121 Application Elementary Files.....................1:122 Directory Structure ....................................1:122 Mapping onto ISO/IEC 7816-4 .................1:122 Files ..................................................................3:37 Financial Transaction .................... 3:35, 3:41, 3:77 Financial Transaction Confirmation .................4:98 Financial Transaction Request..........................4:95 Financial Transaction Response .......................4:97 First Block Transmitted ..................................1:100 Floor Limit .....................................................3:143 Floor Limits ....................................................3:108 Format 1 .........................................................3:141 Format 1 Secure Messaging Illustration .........2:148 Format 2 .........................................................3:141 Format Character T0.........................................1:74 Function Card Action Analysis.................................3:115 Cardholder Verification .............................3:103 Completion ................................................3:122 Initiate Application Processing....................3:93 Issuer-to-Card Script Processing ...............3:119 Offline Data Authentication.........................3:97 Offline PIN Processing ..............................3:105 Online PIN Processing...............................3:106 Online Processing ......................................3:117 Processing Restrictions..............................3:100 Read Application Data.................................3:95 Signature Processing..................................3:106 Terminal Action Analysis ..........................3:111
G
GENERATE AC....................................................... .... 3:56-57, 3:59, 3:87, 3:107, 3:111, 3:113-119, 3:121-122, 3:130, 3:138 Cryptogram Types .......................................3:56 Response to..................................................2:71 GENERATE AC Command .............................2:68 GET CHALLENGE..........................................3:60 GET CHALLENGE Command ........................2:83 GET DATA ......................................................3:61 GET PROCESSING OPTIONS ........... 1:136, 3:63 GET PROCESSING OPTIONS Command ......2:69 GET RESPONSE ...................... 1:91, 1:107, 1:112 Error Conditions ........................................1:114 Guardtime .........................................................1:66
Index
H
Hash Algorithm Indicator......2:46, 2:63, 2:67, 2:74, 2:142 Hashing Algorithms ....................................... 2:142 Historical Bytes................................................ 1:74
I
I . .................................................................... 1:74 I/O Current Limit ............................................. 1:49 I/O Reception .......................................... 1:41, 1:51 I/O Transmission..................................... 1:42, 1:50 IAC..................................... See Issuer Action Code IAD ....................................................... 3:58, 3:137 IBAN.......See International Bank Account Number I-block..... 1:95, 1:97, 1:100-101, 1:104-105, 1:115 Chaining ......................................... 1:101, 1:103 Coding PCB ................................................ 1:96 IC Module Height ............................................ 1:37 IC Reader ......................................................... 4:56 ICC Application Cryptogram Master Keys ...... 2:89 ICC Clock ........................................................ 1:43 ICC Contact Assignment.................................................. 1:39 Layout ......................................................... 1:39 Location ...................................................... 1:38 Resistance.................................................... 1:46 ICC Current Requirement ................................ 1:45 ICC Dynamic Data .................................. 2:65, 2:71 ICC Dynamic Number.........2:65, 2:67, 2:71, 3:134 ICC Electrical Characteristics .......................... 1:40 ICC I/O Reception ........................................... 1:41 ICC I/O Transmission ...................................... 1:42 ICC Insertion and Contact Activation Sequence....... .................................................................... 1:60 ICC Master Key .................................. 2:130, 2:134 ICC Mechanical Characteristics....................... 1:37 ICC PIN Encipherment Public Key Modulus 2:140 ICC Private Key ...................................... 2:64, 2:70 ICC Public Key ..........2:53, 2:63, 2:66, 2:82, 2:140 Restriction on Length ................................ 2:146 Retrieval for DDA and CDA ....................... 2:61 ICC Public Key Algorithm Indicator ............... 2:63 ICC Public Key Certificate .............................. 2:53 ICC Public Key Exponent..................... 2:53, 2:140 ICC Public Key Remainder..................... 2:53, 2:63 ICC Reset ................................................ 1:44, 1:61 ICC Session Key ............................................ 2:130 ICC Temperature Range................................... 1:40 ICC Unpredictable Number ............................. 2:84 ICC VCC.......................................................... 1:45 IFD ...................................................... 2:119, 3:136 IFD Contact Assignment.................................. 1:48 IFSC .........................1:74, 1:81, 1:98, 1:100, 1:102
IFSD...................................................... 1:98, 1:102 IFSI ......................................................... 1:81, 1:98 II .................................................................... 1:76 IIN....................... See Issuer Identification Number Implementation Considerations Application Transaction Counter .............. 2:151 Format 1 Secure Messaging Illustration.... 2:148 ICC Public Key Restriction....................... 2:146 Issuer and ICC Public Key Length............ 2:145 Issuer Public Key Restriction .................... 2:145 Implicit Selection ........................................... 1:135 INF ................................................................... 1:97 Information block.................................. See I-block Informative References ....................... 2:143, 4:128 Informative Terminal Guidelines ................... 4:127 Display ...................................................... 4:128 Keypad ...................................................... 4:128 Power Supply ............................................ 4:127 Terminal Usage ......................................... 4:127 Initial Character............................................ See TS Initial etu .......................................................... 1:65 Initiate Application Processing ............... 3:93, 4:44 INS ...............................................1:90, 1:91, 1:116 INS .................................................................. 1:91 Instruction Byte................................................ 3:43 Instruction Code............................................... 1:90 Integrity............................................................ 1:83 Interface Characters, TA1 to TC3 .................... 1:74 Interface Device .................................. 3:134, 3:136 INTERNAL AUTHENTICATE....................... 3:65 INTERNAL AUTHENTICATE Command .....2:64, 2:147 International Bank Account Number ............. 3:136 Invalid Block.................................................. 1:104 Inverse Logic Convention ................................ 1:73 Issuer Action Code..........3:92, 3:111, 3:112, 3:136 Issuer Application Data................2:71, 3:58, 3:137 Issuer Authentication ....................................... 2:87 ARPC Method 1.......................................... 2:87 ARPC Method 2.......................................... 2:88 Key Management ........................................ 2:89 Issuer Authentication Data ... 2:88, 3:54, 3:117-118, 3:137 Issuer Code Table Index...........1:137, 3:137, 3:164 Issuer Country Code....................................... 3:137 Issuer Identification Number.......................... 3:137 Issuer Identifier ....................................... 2:46, 2:60 Issuer Master Key .......................................... 2:134 Issuer Private Key ..........................2:37, 2:40, 2:53 Issuer Public Key .......... 2:37, 2:46, 2:60-61, 2:140 Restriction on Length ................................ 2:145 Retrieval for DDA and CDA ....................... 2:58 Retrieval for SDA........................................ 2:44 Issuer Public Key Algorithm Indicator............. 2:46 Issuer Public Key Certificate.2:37, 2:40, 2:44, 2:53 Issuer Public Key Exponent .........2:40, 2:53, 2:140 Issuer Public Key Modulus ..................... 2:40, 2:53
Index

Log Entry............................................ 3:139, 3:170 Log Format ......................................... 3:139, 3:171 Logic Convention Direct ...........................................................1:73 Inverse .........................................................1:73 Logical Channels ..............................................3:47 Longitudinal Redundancy Check...............See LRC Loss of Synchronisation .................................1:104 Lower Consecutive Offline Limit ........... See LCOL Lower Voltage ICC Migration..........................1:36 LRC ........................................................ 1:82, 1:97
Issuer Public Key Remainder 2:40, 2:46, 2:53, 2:60 Issuer-to-Card Script Processing .......... 3:119, 4:50 IV ............................................ 2:93, 2:131, 2:148
K
Key Colours......................................................4:60 Key Derivation Master Key.................................................2:134 Session Key ...............................................2:130 Key Introduction Example Timeline...............2:114 Key Length Implementation Considerations .................2:145 Key Management..............................................2:89 Application Cryptogram ..............................2:89 Issuer Authentication ...................................2:89 Secure Messaging ........................................2:97 Key Management Requirements Certification Authority Public Key Introduction ..........................................2:121 Certification Authority Public Key Storage ..................................................2:122 Certification Authority Public Key Usage ....................................................2:123 Certification Authority Public Key Withdrawal............................................2:124 Key Restriction Implementation Considerations ..... 2:145, 2:146 Key Types.........................................................4:59 Key Withdrawal Example Timeline................2:115 Keypad.................................................. 4:59, 4:128 Command Keys............................................4:60 PIN Pad........................................................4:61 Keys and Certificates DDA and CDA ............................................2:53 PIN Encipherment .......................................2:80 SDA .............................................................2:40
M
MAC...............................................................2:129 MAC Chaining .................................................2:95 MAC Master Key ................................... 2:93, 2:97 MAC Session Key ..................... 2:93, 2:129, 2:150 Magnetic Stripe Reader ....................................4:63 Mandatory Data Objects ...................................3:78 Mandatory Header ..........................................1:126 Mapping Data Objects ......................................3:77 Master Key Derivation ...................................2:134 Matching Applications ...................................1:141 Maximum Block Size .......................................1:98 Maximum Current Pulse Envelope......... 1:54, 1:56 Maximum Interval ............................................1:99 MCC ...............................................................3:140 Mechanical Characteristics, ICC ......................1:37 Contact Assignment.....................................1:39 Contact Layout.............................................1:39 Contact Location..........................................1:38 Module Height.............................................1:37 Mechanical Characteristics, Terminal...............1:47 Contact Assignment.....................................1:48 Contact Force...............................................1:48 Contact Location..........................................1:47 Memory Protection ...........................................4:62 Merchant Category Code................................3:140 Merchant Host ..................................................4:40 Merchant Identifier .........................................3:140 Message Authentication Code ................. See MAC Message Content ..............................................4:91 Authorisation Request .................................4:93 Authorisation Response ...............................4:97 Batch Data Capture......................................4:99 Financial Transaction Confirmation ............4:98 Financial Transaction Request.....................4:95 Financial Transaction Response ..................4:97 Online Advice............................................4:102 Reconciliation............................................4:101 Reversal .....................................................4:104 Message Structure...........................................1:125 Messages Standard.......................................................4:86
L
Language ........................................................3:139 Language Preference ......................................1:137 Language Selection...........................................4:85 Last Online Application Transaction Counter .......... ........................................................... See LATC LATC.................................................... 3:82, 3:139 Layout of Contacts............................................1:39 LCOL................................ 3:80, 3:82, 3:110, 3:139 Le .................................................................1:126 LEN ............................................. 1:94, 1:97, 1:100 Length........................................................See LEN Length of Expected Data .............................. See Le List of AIDs Method........................... 1:142, 1:145 Location of Contacts.........................................1:38

MF.................................................................. 1:163 Migration to Lower Voltage Cards .................. 1:36 Minimum Interval ............................................ 1:99 Missing Data .................................................... 3:81 Module Height ................................................. 1:37 Modulo-2 ......................................................... 1:97 Multi-application ICCs .................................. 1:133 Multiple Applications .................................... 1:148 Mutually Supported Applications .................. 1:148
Index
N
N . ......................................................... 1:74, 1:77 NAD................................................................. 1:94 NAK................................................................. 1:95 Negotiable Mode.............................................. 1:79 Node Address........................................... See NAD Non-velocity-checking indicators .................. 3:186 Normal Status................................................. 1:107 Normative References ...................1:5, 2:7, 3:5, 4:7 Notations...............................1:27, 2:29, 3:27, 4:29
O
Offline CVM .................................................... 4:46 Offline Data Authentication .................... 3:97, 4:45 Offline Dynamic Data Authentication.............. 2:49 Offline Enciphered PIN.................................... 2:79 Offline PIN Processing .................................. 3:105 Online Advice ................................................ 4:102 Online CVM .................................................... 4:46 Online PIN Processing ................................... 3:106 Online Processing ................................. 3:117, 4:50 Operating Voltage Ranges ............................... 1:46
P
P . ................................................................... 1:74 P1 . ...................................................... 1:90, 1:116 P2 . ...................................................... 1:90, 1:116 P3 . ................................................................. 1:90 Padding Data Elements ........................................... 3:148 DOL ............................................................ 3:39 Format a, an, ans ....................................... 1:161 Format n .................................................... 1:161 PAN ...................................................... 3:78, 3:128 PAN Sequence Number ................................. 3:128 Parameter Bytes ............................................... 3:43 Parity................................................................ 1:72 Parity Bit .......................................................... 1:66 Parity Error...................................1:93, 1:97, 1:104
Parity Forcing...........................2:131, 2:132, 2:133 Partial Name Selection................................... 1:141 Payment System Application ......................... 1:135 Payment System Directory File...................... 1:122 Payment System Directory Record Format .... 1:138 Payment System Environment ....................... 1:122 Payment System Public Key Policy ................. 2:99 PCB......................................................... 1:94, 1:95 PDOL ................2:69, 2:74, 3:38, 3:63, 3:93, 3:141 Personal Identification Number ................. See PIN Phases........... See Principles and Policies, EMVCO Physical Characteristics.................................... 4:59 Clock ........................................................... 4:62 Display ........................................................ 4:62 Keypad ........................................................ 4:59 Command Keys ...................................... 4:60 PIN Pad .................................................. 4:61 Magnetic Stripe Reader ............................... 4:63 Memory Protection...................................... 4:62 Printer.......................................................... 4:63 Physical Layer.................................................. 1:87 Physical Transportation of Characters.............. 1:65 Physical Transportation of Characters Returned at Answer to Reset ....................... 1:69 PI1.................................................................... 1:76 PI2.................................................................... 1:79 PIN.3:46, 3:48, 3:61, 3:67, 3:71, 3:105-106, 3:119, 3:134-135, 3:140, 3:146, 3:162-163 PIN Block ........................................................ 2:79 PIN CHANGE/UNBLOCK ............................. 3:67 PIN Encipherment............................................ 2:79 Keys and Certificates................................... 2:80 PIN Encipherment and Verification................. 2:83 PIN Entry Bypass............................................. 4:47 PIN Pad................................................... 2:84, 4:61 PIN Pad Security............................................ 2:119 PIX................................................................. 1:136 Plugs and Sockets ............................................ 4:72 Point-of-Service (POS) Entry Mode .............. 3:141 POS ................................................................ 3:141 Power Supply................................................. 4:127 Powering and Depowering............................... 1:57 Primary Account Number ......................................... ...................................3:78, 3:108, 3:128, 3:141 Principles and Policies EMVCo Assessment Phase ................................. 2:110 Decision Phase ..................................... 2:111 Detection Phase .................................... 2:109 Distribution Phase ................................ 2:107 General ................................................. 2:105 Generation Phase.................................. 2:107 Key Usage Phase .................................. 2:108 Planning Phase ..................................... 2:105 Revocation Phase ................................. 2:112 Printer .............................................................. 4:63 Procedure Byte..................1:90, 1:91, 1:107, 1:112
Index

Response APDU Structure ...............................3:42 Response Data ................................................1:115 Resumption Information.................................1:143 Resynchronisation ..........................................1:106 Reversal ..........................................................4:104 Revision Log ........................... 1:iii, 2:iii, 3:iii, 4:iii Revocation................................... 2:103-104, 2:112 RFU Data..........................................................3:47 RID ................. 1:136, 2:39, 2:43, 2:52, 2:54, 2:122 RSA Algorithm...............................................2:140 Rules for BER-TLV Data Objects ..................3:155
Processing Options Data Object List ......See PDOL Processing Restrictions................ 3:100, 4:45, 4:57 Programming Voltage................................See VPP Proprietary Application Identifier Extension............ ...............................................................See PIX Proprietary Authentication Data .......................2:88 Proprietary Data Elements ..............................1:131 Protocol ....................... See Transmission Protocols Protocol Control Byte................................See PCB Protocol Error.................................................1:104 PSE.................................................................1:122 PSE Method....................................................1:142 PTS ...................................................................1:87 Public Key .............................. 3:78-79, 3:82, 3:132 Public Key Algorithm Indicator .....................2:140 Public Key Certificate............. 3:78-79, 3:82, 3:138 Public Key Exponent........ 3:79, 3:82, 3:135, 3:138 Public Key Length Implementation Considerations .................2:145 Public Key Modulus ........... 2:40, 2:53, 2:80, 2:140 Public Key Policy .............................................2:99 Public Key Remainder............ 3:78-79, 3:82, 3:138 Public Key Restriction Implementation Considerations ......... 2:145-146
S
S(ABORT Request) Block..............................1:106 S(IFS Request) Block .....................................1:100 S(IFS Response) Block...................................1:100 S(Response) block ..........................................1:105 S(RESYNCH Request) Block ........................1:106 S(WTX Request) Block..................................1:101 S(WTX Response) Block ...............................1:101 SAD ..................................................................1:94 S-block ........................................ 1:95, 1:97, 1:101 Coding PCB.................................................1:96 Scope ............................................ 1:3, 2:3, 3:3, 4:3 Script .............................. 3:47, 3:119, 3:122, 3:138 Script Incidents...............................................4:109 SDA..................................................................2:37 Keys and Certificates ...................................2:40 Retrieval of Certification Authority Public Key ..............................................2:43 Retrieval of Issuer Public Key .....................2:44 Verification of Signed Static Application Data .....................................2:47 SDA Tag List........................................ 3:98, 3:142 SDAD ................................... 3:65-66, 3:136, 3:142 Secure Hash Algorithm.......................... See SHA-1 Secure Messaging .............................................2:91 Format..........................................................2:91 Key Management .........................................2:97 Secure Messaging for Confidentiality Command Data Field Format 1..................................................2:96 Format 2..................................................2:96 Encipherment Session Key Derivation ........2:97 Encipherment/Decipherment .......................2:97 Secure Messaging for Integrity and Authentication Command Data Field Format 1..................................................2:92 Format 2..................................................2:93 MAC Chaining ............................................2:95 MAC Computation ......................................2:94 MAC Session Key Derivation......................2:93 Secure Messaging Illustration.........................2:148 MAC Computation ....................................2:150
R
Random Transaction Selection .......................3:108 R-APDU ...........................................................1:92 Content ......................................................1:127 Format........................................................1:127 Structure ....................................................1:127 R-block ...........1:95, 1:97, 1:100-101, 1:104, 1:105 Coding PCB.................................................1:96 Read Application Data......................................3:95 READ RECORD ........................... 1:126-127, 3:69 Command Message....................................1:128 Command Reference Control Parameter....1:128 Command-Response APDUs.....................1:127 READ RECORD Command.............................2:54 Receive-ready block ............................ See R-block Reconciliation.................................................4:101 Record ..............................................................3:37 Reference Currency ........................................3:146 References Informative .................................... 2:143, 4:128 Normative ................................ 1:5, 2:7, 3:5, 4:7 Referrals ...........................................................4:53 Registered Application Provider Identifier See RID Reject an ATR ..................................................1:73 Reject an ICC ...................................................1:73 Reset ....................................................... 1:44, 1:61 Terminal Electrical Characteristics ..............1:53 Response...........................................................3:42 Response APDU.................................See R-APDU

Securing the Case 3 Command APDU...... 2:148 Security and Key Management ........................ 4:43 Security Mechanisms Asymmetric Digital Signature Scheme Giving Message Recovery ........................... 2:136 Symmetric Encipherment........................................ 2:127 Master Key Derivation ......................... 2:134 Message Authentication Code .............. 2:129 Session Key Derivation ........................ 2:130 Symmetric Decipherment .......................... 2:128 SELECT.............................................. 1:111, 1:126 Command Message ................................... 1:130 Command Options Parameter.................... 1:130 Command Reference Control Parameter ... 1:130 Command-Response APDUs .................... 1:129 Response Message Data Field (FCI) of ADF.................................................. 1:133 Response Message Data Field (FCI) of DDF.................................................. 1:132 Response Message Data Field (FCI) of PSE................................................... 1:131 Service Code ....................................... 3:141, 3:145 Session Key Derivation.................................. 2:130 b . ................................................. 2:130, 2:131 H .................................................. 2:130, 2:131 IV . .......................................................... 2:131 SFI............................................1:122, 1:123, 3:142 SHA-1 ............................................................ 2:142 Short Circuit Resilience ................................... 1:56 Short File Identifier..... 3:37, 3:38, 3:69, 3:81, 3:95, 3:98, 3:127, 3:142 Signature (Paper) ............................................. 4:47 Signature Processing ...................................... 3:106 Signed Dynamic Application Data............................ ................................2:52, 2:64, 2:66, 2:71, 2:73 Signed Dynamic Application Data......... See SDAD Signed Static Application Data ............... 2:37, 2:40 Verification for SDA................................... 2:47 Signed Static Application Data ...............See SSAD Sliding Carriage ............................................... 1:64 Socket/Plug Relationship ................................. 4:73 Software Management...................................... 4:75 Source Node Address................................See SAD Specific Mode .................................................. 1:79 SSAD .....................3:79, 3:82, 3:133, 3:138, 3:142 Stages of a Card Session .................................. 1:59 Standard Messages ........................................... 4:86 Start Bit ............................................................ 1:66 Static Data Authentication ........................See SDA Static Data Authentication Tag List .......................... ..................................................2:43, 2:47, 2:57 Status Byte Coding........................................... 1:92 Status Bytes...................................................... 3:44 Status Words EXTERNAL AUTHENTICATE............... 3:177
Index
Storage Certification Authority Public Key............ 2:122 Structure of a Block Block Protocol T=1 ..................................... 1:94 Structure of Command Message .................... 1:114 Supervisory block ................................ See S-block Supply Voltage..........................................See VCC Supply Voltage (VCC)..................................... 1:54 SVC..................................................... 3:141, 3:145 Synchronisation..................................... 1:73, 1:101 Syntax Error ................................................... 1:104
T
T=0.............................. See Character Protocol T=0 T=1.................................... See Block Protocol T=1 T0 - Format Character ...................................... 1:74 TA1 - Interface Character................................. 1:75 TA2 - Interface Character................................. 1:79 TA3 - Interface Character................................. 1:81 TAL....................................................... 1:90, 1:115 Tamper-Evident Devices................................ 2:117 TB1 - Interface Character................................. 1:76 TB2 - Interface Character................................. 1:79 TB3 - Interface Character................................. 1:82 TC .................................................................... 2:85 TC Hash value................................................ 3:145 TC1 - Interface Character................................. 1:77 TC2 - Interface Character................................. 1:80 TC3 - Interface Character................................. 1:82 TCK - Check Character.................................... 1:83 TD1 - Interface Character................................. 1:78 TD2 - Interface Character................................. 1:80 TDOL................................3:38, 3:91, 3:133, 3:145 Temperature Range ................................. 1:40, 1:48 Template....... 1:158, 3:70, 3:125, 3:129, 3:132-134, 3:138, 3:141, 3:149 Template 'BF0C'............................................. 1:131 Terminal Capabilities.................................................. 4:38 Configurations............................................. 4:39 Attended ................................................. 4:39 Cardholder-Controlled............................ 4:41 Merchant Host ........................................ 4:40 Examples ................................................... 4:131 ATM ..................................................... 4:133 POS Terminal or Electronic Cash Register............................................ 4:132 Vending Machine ................................. 4:134 Types ........................................................... 4:37 Terminal Action Analysis...................... 3:111, 4:48 Terminal Action Code..................3:111-112, 3:143 Terminal Application Layer ............................. 1:90 Terminal Behaviour during Answer to Reset ... 1:83 Terminal Capabilities .......................... 3:125, 3:143
Index

Transaction Abortion......................................1:106 Transaction Certificate................................. See TC Transaction Certificate Data Object List................... ...........................................................See TDOL Transaction Data Hash Code .................. 2:69, 2:74 Transaction Date................................. 3:108, 3:146 Transaction Flow ..............................................3:83 Transaction Forced Acceptance........................4:54 Transaction Forced Online ...............................4:54 Transaction Log Information ..........................3:169 Transaction Personal Identification Number ..3:146 Transaction Sequence Counter ............. 3:147, 4:55 Transaction Status Information................... See TSI Transaction Time ............................................3:147 Transaction Type ............................................3:147 Transmission Control Parameters .....................1:74 Transmission Error .........................................1:104 Transmission Protocols........................... 1:70, 1:87 See Character Protocol T=0 See Block Protocol T=1 Transport Layer ................................................1:87 Transport of APDUs by T=0 ..........................1:107 Transportation of APDUs by T=1 ..................1:115 Tree Structure .................................................1:121 TRM ................................................... 3:107, 3:143 TS - Initial Character ..................... 1:66, 1:67, 1:73 TSI. 3:93, 3:97-99, 3:103-104, 3:107, 3:115, 3:118, 3:121, 3:147, 4:107 Bit Settings Following Script Processing ..3:173 Coding .......................................................3:168 TTL............................................ 1:90, 1:106, 1:115 Transport of APDUs by T=0......................1:107 Transportation of APDUs by T=1..............1:115 TVR... 2:39, 2:52, 2:72, 3:81, 3:91, 3:93, 3:97-102, 3:104-111, 3:117, 3:121, 3:144, 3:177, 4:45-48, 4:54 Bit Settings Following Script Processing ..3:173 Coding .......................................................3:165 Types of Blocks ................................................1:95
Card Data Input Capability ........................4:114 CVM Capability ........................................4:115 Security Capability ....................................4:115 Terminal Country Code ..................................3:143 Terminal Data Elements, Coding....................4:113 Terminal Electrical Characteristics...................1:48 Clock............................................................1:52 Contact Resistance.......................................1:56 Current Requirement ...................................1:54 I/O Current Limit.........................................1:49 I/O Reception...............................................1:51 I/O Transmission .........................................1:50 Powering and Depowering...........................1:57 Reset ............................................................1:53 Short Circuit Resilience...............................1:56 Temperature Range......................................1:48 VCC.............................................................1:54 VPP..............................................................1:51 Terminal Guidelines, Informative...................4:127 Terminal Identification ...................................3:143 Terminal Logic Using Directories ..................1:144 Terminal Mechanical Characteristics................1:47 Contact Assignment.....................................1:48 Contact Force...............................................1:48 Contact Location..........................................1:47 Terminal Response to Procedure Byte..............1:91 Terminal Risk Management............................3:143 Terminal Risk Management..............................4:48 Terminal Security Requirements ....................2:117 PIN Pads ....................................................2:119 Tamper-Evident Devices............................2:117 Terminal Software Architecture........................4:67 Application Libraries ...................................4:68 Application Program Interface.....................4:69 Environmental Changes...............................4:67 Interpreter Application Code Portability ..................4:71 Concept ...................................................4:70 Kernel .....................................................4:71 Virtual Machine ......................................4:71 Plugs and Sockets ........................................4:72 Terminal Supply Voltage and Current..............1:55 Terminal Transport Layer .......................... See TTL Terminal Type ................................................3:143 Terminal Type, Coding...................................4:113 Terminal Types, Terminology ..........................4:37 Terminal Usage...............................................4:127 Terminal Verification Results................... See TVR Terminology ......................... 1:31, 2:33, 3:31, 4:33 Timeline, Example Key Introduction........................................2:114 Key Withdrawal.........................................2:115 Timelines Public Key Revociation and Introduction..2:113 Track 1............................................................3:144 Track 2............................................................3:144 Trailer .............................................................1:127
U
UCOL ............................... 3:80, 3:82, 3:110, 3:147 UN ..................................................................3:147 Unable to Go Online.......................................4:106 Unpredictable Number ....... 2:64, 2:68, 3:147, 4:55 Upper Consecutive Offline Limit ...........See UCOL URL................................................................3:138 Using the List of AIDs in the Terminal ..........1:147
V
VCC ICC Electrical Characteristics......................1:45

Terminal Electrical Characteristics.............. 1:54 Velocity Checking.......................................... 3:110 VERIFY ........................................................... 3:71 VERIFY Command.......................................... 2:83 Voice Referrals ................................................ 4:53 Voltage Ranges ................................................ 1:46 VPP ......................................................... 1:76, 1:79 ICC Electrical Characteristics ..................... 1:42 Terminal Electrical Characteristics.............. 1:51
Index
W
Waiting Time Integer ...................................See WI Warm Reset...................................................... 1:62 Warning Status............................................... 1:107 WI .................................................................... 1:80 Withdrawal Certification Authority Public Key............ 2:124 Work Waiting Time ................................ 1:80, 1:89

EMV v4.1 Book 4 Other Interfaces

Uploaded by

Copyright:

Available Formats

EMV v4.1 Book 4 Other Interfaces

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

EMV v4.1 Book 4 Other Interfaces

Uploaded by

Copyright:

Available Formats

EMV

Integrated Circuit Card Specifications for Payment Systems

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Revision Log - Version 4.1

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

113 113 114 116 119 119 120

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Annex B Annex C Annex D

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

132 133 134

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

1.1 Changes in Version 4.1

1 Scope 1.2 Structure

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

1 Scope 1.3 Underlying Standards

1.3 Underlying Standards

1 Scope 1.4 Audience

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

ISO 3166 ISO 4217 ISO/IEC 7811-1 ISO/IEC 7811-3

ISO/IEC 7813 ISO/IEC 7816-1 ISO/IEC 7816-2

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

ISO 8583:1993 ISO/IEC 8825-1

ISO/IEC 8859 ISO 9362 ISO 9564-1

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

ISO 13616 ISO 16609

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Byte Card Certificate

Certification Authority Ciphertext Cold Reset

Combined DDA/Application Cryptogram Generation Command

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Dynamic Data Authentication Embossing Encipherment Epilogue Field Exclusive-OR

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Hash Result Inactive

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Issuer Action Code

Key Key Expiry Date

Key Introduction Key Life Cycle

Key Replacement Key Revocation

Key Revocation Date

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

PIN Pad Plaintext Planned Revocation

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Public Key Certificate Response

Secret Key Signal Amplitude Signal Perturbations

EMV 4.1 Book 4 Cardholder, Attendant, and Acquirer Interface Requirements

Static Data Authentication Symmetric Cryptographic Technique

T=0 T=1 Template Terminal