AMPEROMETRY
AMPEROMETRY
AMPEROMETRY
Flow of presentation :
Definition
Principle Criteria for performing amperometric titrations Apparatus Rotating platinum electrode Types of amperometric titrations Commercially available amperometers Advantages Applications
Definition:
Amperometric titration refers to a class of titrations in which the equivalence point is determined through measurement of the electric current produced by the titration reaction. It is a form ofquantitative analysis.
Otherwise called as Polarographic or polarometric titrations. Indicator microelectrode: DME or RPE
Principle:
According to Ilkovic equation
id = 607 n C D1/2m 2/3 t1/6
id is proportional to concentration keeping all other factors of the equation constant. So, if some of the electroactive material in the solution is removed by interaction with some other reagent the diffusion current will decrease proportionally.
The diffusion current at an appropriate applied voltage is measured as a function of the volume of the titrating solution. The end point is the intersection of two lines giving the change of current before and after the equivalence point.
Apparatus
burette Rotating Pt micro electrode SCE
Apparatus
Pyrex glass, that is a three necked, flatbottomed flask a micro burette, dropping mercury electrode(ind- polarisable) gas outlet tube for N2 with an additional inlet N2 provision connected to a reference electrode(SCE - nonpolarisable)
Y Platinum???
Mercury cannot be used as electrode at positive potentials because of its oxidation rotating platinum electrode is used
y rotating ???
With platinum as electrode, the attainment of steady state diffusion current is slow One has to wait for a considerable time after each addition of the reagent Therefore platinum electrode is rotated at 600 rpm.
RPE
Glass rod with a bent Pt wire at its tip 600rpm. Wire contacts are made through a mercury reservoir so that potential can be applied and the current is measured. Nitrogen gas is bubbled through the titrate to remove oxygen.
Ex: lead(
Ex: chloride(
) Vs silver ions(
Ex: lead (
) Vs dichromate ions(
At the applied potential substance gives anodic current and titrant cathodic current.
Ex: (eg. I ion with Hg(NO3)2 )
Biamperometry
Difference from amperometry ??? a pair of identical metallic or solid microelectrodes/polarized electrodes are used. SCE is replaced with platinum electrode in the electrolysis cell. a magnetic stirrer is used.
A fixed potential difference of 10-20 mV is applied between the two electrodes through the adjustment of resistance variable potentiometer, R (1000 ohms). One electrode as anode and the other cathode.
Applicable when redox system is present before and after the end point. Ex: KARL FISCHER TITRATION (end pt) A small potential is applied between the 2 similar Pt electrodes. Initially when water is present both electrodes are depolarised.
Addition of KF reagent (sol of iodine and in pyridine and methanol) till the end ptdecreases at the end point. is almost zero at the end point. After the end point gradually increases due to the addition of the titrant. Dead- Stop End Point Method
(mechanical guage)amperometer
Product details:
Mnf company : Ruian Kangertai Automobile Parts Co., Ltd. Brand Name: Kangertai Place of Origin: China Model No: CS033
Product details:
Mnf company: Xiamen Dexing Imp. & Exp. Co., Ltd. Place of Origin: Fujian, China (Mainland) Brand Name: Dexing Model Number: D26-A,D61-A,D76-A,D9-A,T51A,T77-A,T63-A Display Type: Analog and Digital Measuring Range: 0-75-150-300-600V Accuracy Class: 0.5
Advantages of amperometry:
Rapid , simple apparatus. Titrations can be carried out in cases in which the solubility relations are such that potentiometric or visual indicator methods are unsatisfactory. Ex:? can be carried out at dilutions (104 M) at which many visual or potentiometric titrations no longer yield accurate results.
supporting electrolyte(without interference) to eliminate the migration current which is not possible in case of conductometric titration. The temperature need not be known provided it is kept constant during the titration. The reactions can be reversible or irreversible. Non reducible ions which cannot be determined by polarography can be determined easily.
wider range of applications than polarography because even electro-inactive substances can be determined using electro-active titrant. Quantitative (end point) Determination of water using KF reagent (biamperometry) Quantification of ions or mixture of ions.
Ni2+ Sulphate, FICl-, Br-, I-, CNK+ As(III), Na2S2O3 Alkenes Some phenols, aromatic amines
Amperometric detector
Optimum for High-sensitivity Analysis of Carbohydrates and Polyols in the pharmaceuticals !!! Derivatization and other complex pretreatments are not necessary. The sensitivity is about 10 to 100 times greater than that of a differential refractometer. http://www.dionex.com/en-us/webdocs/5046-An117.pdf
Amperometry uses a carbon electrode to record changes in the chemical composition of the oxidized components of a biological solution. used for studying exocytosis in the neural and endocrine systems bcoz many monoamine tansmitters are oxidisable. http://en.wikipedia.org/wiki/Electrophysiology
Amperometric determination of acetylsalicylic acid in drug formulations using copper electrode in alkaline solutions. http://144.206.159.178/FT/1000/73279/125580 8.pdf
Amperometer measures glucose levels from tears - A report appears in ACS journal Analytical Chemistry. (ongoing effort) http://www.knowabouthealth.com/amperomet er-measures-glucose-levels-from-tears/9097/
Amperometry Videos on :
http://www.youtube.com/watch?NR=1&v=OU N8oY6kcXw&feature=endscreen
References
Wikipedia http://vedyadhara.ignou.ac.in/ Vogel's TB of Quantitative Chemical Analysis 5ed.
Thank u