Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Dummy

    Uploaded by

    thopa_nath
    This document summarizes the results of a local stress calculation for dummy supports on a pipe with the following parameters: 100 psi design pressure, 150 psi hydrotest pressure, 425°F design temperature, ASTM A106 Gr. B material, 24 inch pipe diameter, 0.237 inch pipe wall thickness, and 0 inch clearance between pipe and support centers. The calculated stresses under various load conditions including deadweight, pressure, thermal, and hydrotest are all below the allowable stress of 19725 psi for the dummy pipe and below the allowable stresses of 29931 psi, 26600 psi, 35000 psi, and 35000 psi for the header pipe under different design conditions. The weld size was also determined to be acceptable

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    Dummy

    Uploaded by

    thopa_nath
    2K views1 page
    This document summarizes the results of a local stress calculation for dummy supports on a pipe with the following parameters: 100 psi design pressure, 150 psi hydrotest pressure, 425°F design temperature, ASTM A106 Gr. B material, 24 inch pipe diameter, 0.237 inch pipe wall thickness, and 0 inch clearance between pipe and support centers. The calculated stresses under various load conditions including deadweight, pressure, thermal, and hydrotest are all below the allowable stress of 19725 psi for the dummy pipe and below the allowable stresses of 29931 psi, 26600 psi, 35000 psi, and 35000 psi for the header pipe under different design conditions. The weld size was also determined to be acceptable

    Original Description:

    dummy spread sheet

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the results of a local stress calculation for dummy supports on a pipe with the following parameters: 100 psi design pressure, 150 psi hydrotest pressure, 425°F design temperature, ASTM A106 Gr. B material, 24 inch pipe diameter, 0.237 inch pipe wall thickness, and 0 inch clearance between pipe and support centers. The calculated stresses under various load conditions including deadweight, pressure, thermal, and hydrotest are all below the allowable stress of 19725 psi for the dummy pipe and below the allowable stresses of 29931 psi, 26600 psi, 35000 psi, and 35000 psi for the header pipe under different design conditions. The weld size was also determined to be acceptable

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    2K views1 page

    Dummy

    Uploaded by

    thopa_nath
    This document summarizes the results of a local stress calculation for dummy supports on a pipe with the following parameters: 100 psi design pressure, 150 psi hydrotest pressure, 425°F design temperature, ASTM A106 Gr. B material, 24 inch pipe diameter, 0.237 inch pipe wall thickness, and 0 inch clearance between pipe and support centers. The calculated stresses under various load conditions including deadweight, pressure, thermal, and hydrotest are all below the allowable stress of 19725 psi for the dummy pipe and below the allowable stresses of 29931 psi, 26600 psi, 35000 psi, and 35000 psi for the header pipe under different design conditions. The weld size was also determined to be acceptable

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    FLUOR

    Local Stress Calculation for Dummy Supports


    Client Contract Line No. Prepared Checked Node No.

    Design Pressure Hydrotest Pressure Design Temperature Material NPS of Pipe(D) Pipe wall thickness(Th) Corrosion allowance Re.pad thickness(Tr) Allowable Stress(Sh) ASTM A106 Gr.B

    100 psi 150 psi 425 F

    Moment Arm Length(L) NPS of trunnion(d) Trunnion Thickness(Tb) Pipe CL to Support CL(e)

    24 inch 4 inch 0.237 Inch 0 Inch


    Short Radius

    6 inch 0.28 inch 0.125 inch 0.28 inch 19725 psi

    Long Radius TRUE

    Mill Tolerance(%) Weld Size(optional) 0.237 inch

    Loads Radial Circ Long

    Deadweight 300 250 300

    Thermal 400 350 450

    Occasional 100 150 200

    Hydrotest 350 300 450

    Header Pipe Design Condtion Calculated stress Allowable Result Calculated Stress 8682

    Dummy Pipe Allowable Result

    Dead Weight Pressure Thermal Dead Weight,Pressure and Occasional Hydrotest

    6448

    29588

    OK

    19725

    OK

    4243

    29931

    OK

    12349

    29931

    OK

    9123

    36000

    OK

    14138

    26600

    OK

    9004

    35000

    OK

    11793

    35000

    OK

    Weld size is OK for the Loads

    Note :

    This work sheet is based on M .W . Kel log' s Formula


    2 L

    for local stress S =

    1 . 17 f t2

    Rt

    where f = load per linear length = 1 . 5 ( ( f and f = combined (f


    2 L

    + f C2 ) + f A ) in Sus case al and Circumfere ntial components are not

    + f ) + 1 . 5 f A in Thermal
    2 C

    case . But Longitudin

    if f L 3 f C or f C 2 f L

    Page 1 of 1

    File : 103779128.xls.ms_office

    Date :7/18/2012

    You might also like