HATZ Engine 2G40 - E

G series
2G40 7.4 - 17.0 kW
THE 2-CYLINDER POWER PACKAGE

5
2G40
DESIGN
Aircooled 2-cylinder four stroke Diesel engines. Vertical cylinder. Crankcase in light alloy, pressure diecast. Cylinder of grey cast iron. Single Cylinder head in light alloy. Three-slide bearing crankshaft with solid-forged counterweights.. Direct injection, multi-hole nozzle. Value control by rocker, push-rods, tappets and camshaft. Pressure circulating lubrication system with replaceable filter in main flow. Flywheel fan, charging alternator integrated into flywheel. No V-belt necessary.
CHARACTERISTICS
Denoised: emission of noise reduced to the absolute minimum by means of design features and precision manufacture. All purpose industrial Diesel engine. Low weight due to design of alloy. Low fuel consumption due to direct injection. Favourable exhaust gas values EPA / CARB certified. Robust: long life engine. Low repair cost due to single cylinders and single cylinder heads. Reliable: no V-belts. Easy to service: automatic injection pump bleeding. Reliable, effortless starting thanks to automatic extra fuel device. Rope start or electric start available.
EXHAUST REDUCED TYPES ON REQUEST
ADDITIONAL EQUIPMENT
EPA TIER IV CARB TIER IV ECE R 24 ARAI Indien

Motorenfabrik HATZ 2 2G40
TECHNICAL DATA
Number of cylinders Bore x stroke Displacement Mean piston speed at 3000 r.p.m. Compression ratio Lub. oil consumption, related to full load Lub. oil capacity max. / min. Speed control
l US qts Idle speed static speed droop mm inches l cu.in. m/s ft/min
2G40
2 92 x 75 3.62 x 2.95 0.997 60.84 7.5 1476 20.5 approx. 1% of fuel consumption 2.5 / 1.67 2.643 / 1.765 approx. 1000 r.p.m. approx. 5% at 3000 r.p.m.
TORQUE
= at F-power according to DIN ISO 1585
Nm
= at B-power according to ISO 3046-1
54 52 50 48 46 44 42 40 1500 2000 2600 3000 3600 n [r.p.m.]

Performance data refer to Standard Reference Conditions of ISO 3046-1: + 25 C (77 F), 100 kPa, relative humidity 30 %. During running-in period the output increases by approx. 5 % which is taken into consideration at delivery. Power reduction acc. to ISO 3046-1. Standard values: Above 100 m ALT approx. 1 % per 100 m. Above 25 C (77 F) approx. 4 % per 10 C (50 F). The power taken from charging alternator also has to be added to the demand of power.
SPECIFIC FUEL CONSUMPTION

= at F-power according to DIN ISO 1585
g/kWh
= at B-power according to ISO 3046-1
270 260 250 240 230
3
1500 2000 2600 3000 3600
2G40
Motorenfabrik HATZ
INSTALLATION DATA
Combustion air required at 3000 r.p.m. approx. 1) Cooling air required at 3000 r.p.m. approx. 1) Moment of inertia Starter
3000 min-1 m3 / min cu.ft./min m / min cu.ft./min kgm2 lb.ft2
3
2G40
1.42 50.3 10.5 370 0.16 3.78 12 V - 2.0 kW 24 V - 3.0 kW
14 V 23 A, 28 V 12 A, 14 V 55 A, 28 V 27 A 14 V 10 A, 28 V 5 A, 14 V 55 A, 28 V 27 A 12 V / 45 / 88 Ah, 24 V / 45 / 88 Ah
Alternator charging current at 3000 / 1500 r.p.m. Battery capacity

1)
1500 min-1 min / max Ah
For other r.p.m. there is a linear reduction in the air requirement
PERMISSIBLE LOAD ON POWER-TAKE-OFF POINTS Max. permissible radial load

F1 =
261 000 L1 (mm)
(N)*
F2 =
293 000 L 2 (mm)
(N)*
*) If belt tension is upwards,valves reduced to approx. 55 %.
Max. permissible axial force:

FA = 3400 N
Transmissible torque:
A: 100 % B: 100 % C: 30.6 Nm
1
MAINTENANCE AND OPERATING POINTS

For the engine to achieve its maximum life, it is essential for it to be serviced meticulously at regular intervals. The better the accessibility, the more promtly and conscientiously the engine will be maintained. Please convince yourself personally that all service and operation points are easily accessible before delivering your machine to the customer. Fuel filling Injection valves Oil filling Valve cover Oil bath air filter Injection pump Stop lever
Speed control lever Oil drain plug Fuel filter Replaceable oil filter Oil dipstick
2
ELECTRICAL EQUIPMENT
The engine-mounted components, such as starter, alternator and switches, are connected to the instrument box by means of a 2 m cable harness. The engine is started and controlled from this instrument box. Instrument box and cable harness are part of the additional equipment and supplied according to the number of electrical safety features which are required. If the engine has to be started at temperatures below - 7 C, it must be equipped with a preheating system (glow plug) (additional equipment). Further additional equipment includes automatic start and stop, remote control etc. Please ask for drawings and wiring diagrams. www.hatz-diesel.com
POWER-TAKE-OFF AND SENSE OF ROTATION

Main power-take-off with engine speed at opposite side of flywheel (fig. 3). Power-take-off at flywheel with engine speed (fig. 4).
ENGINE VARIANTS
Rope start (fig. 5). Electric start 12 V (fig. 6). Electric start 24 V (fig. 6). Electric start 12 V (fig. 7) Electric start 24 V (fig 7).
flangeable at main p.t.o. side opposite flywheel either directly or using adaptor housing SAE 5.
WEIGHT
incl. tank, air filter, and exhaust silencer
Rope start
Electric start 12 V, flywheelalternator 20A
Electric start 24 V, flywheelalternator 8A
Electric start 12 V, belt driven alternator 55A
Electric start 24 V, belt driven alternator 27A
kg lbs.
88.8 195.8
96.8 213.4
99.1 218.5
103.4 228.0
105.2 232.0
MOUNTING OF ENGINE
For engine speeds above 2300 - 2500 r.p.m. it is recommended to use flexible mounts. On request we recommend suitable rubber mounts. Please inform us: weight of unit to be supported position of gravity center selected speed
6
SCOPE OF DELIVERY OF ENGINE IN STANDARD EQUIPMENT

Engine completely assembled and tested for full load. Equipped with speed control, operated via Bowden cable, automatic cold start device, automatic injection pump bleeding, eye-hook for transport (capability for engine only). Sheet metal parts black lacquered. Engine without oil. Additional equipment: Gaskets for 1st maintenance
ADDITIONAL EQUIPMENT
Thanks to the complete programme of additional equipment every engine can be adapted to the special requirements of every application. As a minimum, every engine needs the additional equipment, necessary for operation. You find out details at our HATZ-contracting partners.
5 2G40
Motorenfabrik HATZ
PERFORMANCE MOTORDATEN TABLE Norm
1B20V
Hatz-Spec. r.p.m.
1B30V
kW*
1B40V 2G40
1B50V
HP*
3600
Vehicle output acc. to DIN ISO 1585.
17.0 16.2 14.6 16.3 15.5 13.9 15.6 14.7 13.4 12.0 10.5 9.3 7.4
23.1 22.0 19.9 22.2 21.1 18.9 21.2 20.0 18.2 16.3 14.3 12.6 10.1
NF
3000 2600 3600
ISO net brake fuel stop power (IFN) for strong intermittent load acc. to ISO 3046-1.
NBSi
3000 2600 3600 3000 2600
ISO net brake fuel stop power (IFN) for intermittent load acc. to ISO 3046-1.
NB
2300 2000 1800 1500
ISO-standard power (ICXN) (10% overload permissible) ISO-standard fuel stop power (no overload permissible) acc. to ISO 3046-1. For constant speed and constant load (ICFN).
3000 NS
(NA)
13.7
18.6
2500
12.3
16.7
* Performance specifications without exhaust certificates. Performance tables with exhaust certificates upon request.
DIMENSIONS
Spread at outlines 3 mm due to tolerance.
2G40
17
30
25
25
max. permanent tilting
2G40
Drawings with detailed - and connection measures can either be demanded or downloaded as pdf- resp. dxf-file which are shown in the Internet.
*)
Motorenfabrik HATZ
MOTORENFABRIK HATZ GMBH & CO. KG Ernst-Hatz-Strae 16 94099 Ruhstorf GERMANY
Telephone: +49 8531 319-0 Telefax: +49 8531 319-418 marketing@hatz-diesel.de www.hatz-diesel.com
5 / 700 384 76 - ENG - 10.11 - 1 Printed in Germany Modifications, which serve the technical improvements, are reserved.

HATZ Engine 2G40 - E

Uploaded by

Copyright:

Available Formats

HATZ Engine 2G40 - E

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HATZ Engine 2G40 - E

Uploaded by

Copyright:

Available Formats

G series

2G40 7.4 - 17.0 kW

THE 2-CYLINDER POWER PACKAGE

EXHAUST REDUCED TYPES ON REQUEST

EPA TIER IV CARB TIER IV ECE R 24 ARAI Indien

= at B-power according to ISO 3046-1

54 52 50 48 46 44 42 40 1500 2000 2600 3000 3600 n [r.p.m.]

SPECIFIC FUEL CONSUMPTION

= at B-power according to ISO 3046-1

270 260 250 240 230

Alternator charging current at 3000 / 1500 r.p.m. Battery capacity

1500 min-1 min / max Ah

For other r.p.m. there is a linear reduction in the air requirement

PERMISSIBLE LOAD ON POWER-TAKE-OFF POINTS Max. permissible radial load

261 000 L1 (mm)

293 000 L 2 (mm)

*) If belt tension is upwards,valves reduced to approx. 55 %.

Max. permissible axial force:

MAINTENANCE AND OPERATING POINTS

Motorenfabrik HATZ 4 2G40

POWER-TAKE-OFF AND SENSE OF ROTATION

incl. tank, air filter, and exhaust silencer

Electric start 12 V, flywheelalternator 20A

Electric start 24 V, flywheelalternator 8A

Electric start 12 V, belt driven alternator 55A

Electric start 24 V, belt driven alternator 27A

SCOPE OF DELIVERY OF ENGINE IN STANDARD EQUIPMENT

PERFORMANCE MOTORDATEN TABLE Norm

3000 2600 3600

3000 2600 3600 3000 2600

2300 2000 1800 1500

Motorenfabrik HATZ 6 2G40

Spread at outlines 3 mm due to tolerance.

max. permanent tilting

MOTORENFABRIK HATZ GMBH & CO. KG Ernst-Hatz-Strae 16 94099 Ruhstorf GERMANY

You might also like