University of Mumbai: M. E. (Electronics and Telecommunication Engineering)
University of Mumbai: M. E. (Electronics and Telecommunication Engineering)
University of Mumbai: M. E. (Electronics and Telecommunication Engineering)
62
UNIVERSITY OF MUMBAI
Semester I
Subject Code ETC101 ETC102 ETC103 ETE101X ETE102X ETL101 Subject Name Statistical Signal Analysis Optical Fiber Communication# Digital Signal Processing and its Applications Elective I Elective II Laboratory I - Optical Fiber Communication Laboratory II Modeling and Simulation of Communication System Total Teaching Scheme (Contact Hours/week) Theory Pract. Tut. 04 04 04 04 04 ------02 ------Credits Assigned Theory 04 04 04 04 04 -Pract. -----01 Tut. ------Total 04 04 04 04 04 01
ETL102
--
02
--
--
01
--
01
Subject Code
Subject Name
20 02 Examination Scheme Theory Internal Assessment End Exam. Term Sem.E Duration Work Test1 Test 2 Avg. xam. (in Hrs) 20 20 20 20 20 -20 20 20 20 20 -20 20 20 20 20 -80 80 80 80 80 -03 03 03 03 03 ------25
20
04
--
--
22
Total
ETL102
Statistical Signal Analysis Optical Fiber Communication# Digital Signal Processing and its Applications Elective I Elective II Laboratory I - Optical Fiber Communication Laboratory II Modeling and Simulation of Communication System Total
--
--
--
--
--
25
25
50
100
100
100
400
--
50
50
600
Elective I Image and Video Processing and Broadcasting Modeling and Simulation of Communication System VLSI and Mixed Signal Circuits and System Advanced Satellite Communication
ETE1012
ETE1022
ETE1013
ETE1023
Embedded System$
Next Generation Networks
ETE1014
ETE1024
#and$- Common for Electronics and Telecommunication Engineering and Electronics Engineering
Semester II
Subject Code ETC201 ETC202 Subject Name Advanced Digital Communications Mobile and Wireless Communications Microwave and Millimeter wave Communication Systems Elective III Elective IV Laboratory III Mobile and Wireless Communications Laboratory IV Advanced Antenna and Arrays Total Teaching Scheme (Contact Hours/week) Theory Pract. Tut. 04 04 ----Credits Assigned Theory 04 04 Pract. --Tut. --Total 04 04
04 04 04 --
---02
-----
04 04 04 --
---01
-----
04 04 04 01
ETL202
-20
02 04
---
--
01
---
01 22
Subject Code
Subject Name
20 02 Examination Scheme Theory Internal Assessment End Exam. Term Sem.Ex Duration Work Test1 Test 2 Avg. am. (in Hrs) 20 20 20 20 20 20 80 80 03 03 ---
Total
ETC201 ETC202
ETL202
Advanced Digital Communications Mobile and Wireless Communications Microwave and Millimeter wave Communication Systems Elective III Elective IV Laboratory III - Mobile and Wireless Communications Laboratory IV Advanced Antenna and Arrays Total
100 100
20 20 20 --
20 20 20 --
20 20 20 --
80 80 80 --
03 03 03 --
---25
---25
-100
-100
-100
-400
---
25 50
25 50
50 600
Elective III
Adaptive Signal Processing Nano-electronics Advanced Antenna and Arrays Optical Networks
Elective IV Wavelets
Cloud Computing
Semester III
Subject Code ETS301 ETD301 Subject Name Seminar Dissertation I Total Teaching Scheme Credits Assigned (Contact Hours/week) Theory Pract. Tut. Theory Pract. Tut. -06 --03 --24 --12 -30 --15 --Examination Scheme Theory Term Pract. Internal Assessment End Sem.Exa Work / Oral Test1 Test 2 Avg. m. -50 50 ----100 --------150 50
Total 03 12 15
Subject Name
Semester IV
Subject Code ETD401 Subject Name Dissertation II Total Teaching Scheme Credits Assigned (Contact Hours/week) Theory Pract. Tut. Theory Pract. Tut. -30 --15 -30 --15 --Examination Scheme Theory Term Pract. Internal Assessment End Sem.Exa Work / Oral Test1 Test 2 Avg. m. -100 100 -------100 100
Total 15 15
Subject Name
Dissertation II Total
Note: o In case of Seminar (ETD301), 01 Hour / week / student should be considered for the calculation of load of a teacher o In case of Dissertation I (ETD301) and Dissertation II (ETD401), 02 Hour / week / student should be considered for the calculation of load of a teacher
Subject Code
Subject Name
Credits
ETC101
Module
1
04
Hours 14
Review of following topics Basic concepts of probability theory (definitions, conditional probability, independent of events, sequential experiments) Random variables (cumulative distribution function, probability density function, some important random variables, functions of random variables, the expected value of random variable, transform methods) Multiple random variables (vector random variables, conditional probability and conditional expectation, joint distribution, independence, functions of several random variables, expected value of functions of random variables) Sums of random variables (mean, variance, &pdf of random variables, the central limit theorem proof, confidence intervals) Random processes Definition of random process Specifying a random process Examples of discrete- and continuous-time random processes Stationary random processes Time averages of random processes &ergodic theorems Analysis and processing of random signals Power spectral density Response of linear systems to random signals Amplitude modulation by random signals Optimum linear systems The Kalman filter Markov chains Markov processes Discrete Markov chains Continuous time Markov chains Introduction to queueing theory The elements of queueing system Littles formula The M/M/1 queue Multi-server systems Finite-source queueing systems M/G/1 queueing systems
10
10
06
08
Reference Book: 1. Random Processes: A Mathematical Approach for Engineers by R. M. Gray and L. D. Davisson , Prentice-Hall, Englewood Cliffs, N.J., 1986.
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination:
other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
ETC102
Subject Name
Credits
04
Hours 04
Module
1
A Review of Optical Fibers Introduction Ray theory Theory of optical wave propagation Classification of optical fibers Signal Degradation Non Zero Dispersion Shifted Fibers Plastic optical fibers Splicing efficiency and optical fiber alignment Fiber optic cable Advanced Optical Sources and Detectors Quantum well lasers Charge capture in Quantum well lasers Multi Quantum well Laser diodes Surface Emitting Lasers: Vertical cavity Surface Emitting Lasers Resonant cavity enhancement (RCE) Photo Detector Material requirement for RCEPD Wavelength selectivity High speed comparison of conventional and RCEPD RCE Schottky Photodiode RCE Avalanche Photodiode Optical Amplification Properties of Erbium Doped glass Optical Pumping Erbium Doped Amplifier Semiconductor Laser Amplifier Raman Amplifier Raman Gain and Bandwidth Multiple pump Raman Amplifier Raman Induced signal gain Noise Figure of Raman Amplifier Optical Signal to noise ratio Electrical Signal to noise ratio Application Integrated Optics Planar and channel waveguides Coupled mode theory for waveguides Beam Splitters, Directional couplers and Photonic Switch Optical Modulators Arrayed waveguide Grating (AWG) Multimode interference coupler (MMI) Opto Electronic Integration Fabrication Techniques Material
08
08
06
Non linear Optics 10 General Overview of nonlinearties Effective area and length Stimulated Raman Scattering Stimulated Brillouin Scattering Self Phase modulation Cross Phase modulation Four wave mixing and its mitigation Solitons Properties of Solitons Loss managed Soliton Dispersion managed Soliton Dispersion Management: Dispersion problems and its solution, Dispersion compensating Fibers ,its design, Fiber Brag Grating, Dispersion Equalizing Filters Optical Phase conjugation PMD Compensation 6 Optical Networks 06 Network concepts Network Topologies FDDI SONET/SDH DWDM Networks 7 Advanced Topics in OFC: 06 Biophotonics Optical computing Optical MEMS Photonics Crystals Fibers and Waveguides #-Common for Electronics and Telecommunication Engineering and Electronics Engineering
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETC103
04
Hours 14
Module
1
Review of following topics with relevant numerical examples A typical real-time DSP system DFT, its computation (DIT & DIF algorithms), & important properties FIR filter design Window & frequency sampling method IIR filter design Impulse invariant & Bilinear z-transform method Realization structures for FIR & IIR filters Multirate DSP Introduction & concept of multirate processing Design of practical sampling rate converters Sample rate conversion using polyphase filter structure Spectrum estimation & analysis Introduction Principles of spectrum estimation Traditional methods Modern parametric estimation methods Autoregressive spectrum estimation General- and special-purpose digital signal processors Introduction Computer architecture for signal processing General purpose digital signal processors Selecting digital signal processors Special purpose DSP hardware Analysis of finite wordlength effect in fixed-point DSP systems Introduction DSP arithmetic ADC quantization noise & signal quality Finite wordlength effects in IIR & FIR digital filters Overview of real-world applications of DSP Audio applications of DSP Telecommunication applications of DSP Biomedical applications of DSP
08
08
06
08
04
Reference Books: 1 Fundamentals of Digital Signal Processing using MATLAB- Robert Schilling, Sandra Harris, Cengage Learning 2. Digital Signal Processing, S. K. Mitra, Tata McGraw Hill Publication 2001 3. Digital Signal Processing by Chen, OxfordUniversity Press 4. A Practical Approach to Digital Signal Processing, Padmanabhan K., New Age International
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination:
other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETL101
01
Module
1 2 3 4 5 6 7 8 9 10 11 12
Simulation of the Following Designing of Single mode fiber Designing of Planar Channel waveguides Designing of AWG Designing of Fiber Brag Grating Designing of MZI modulator Performance analysis of Optical Link upto 40 Gbps Performance Analysis of Optical Link with Different Sources Performance Analysis of Optical Link with Different Detectors Performance Analysis of Optical Amplifier Performance Analysis of DWDM System Performance Analysis ofSoliton Communication System Designing of Optical MEMS
Assessment:
End Semester Examination: Practical/Oral examination is to be conducted by pair of internal and external examiners
Subject Code
Subject Name
Credits
ETL102
01
Module
1 2 3 4 5 6 7 8 9 10 11 12
Study and Analysis of different types of Analog Communication Circuit using Simulation Software (any two circuits) Study and Analysis of different of Digital Communication Systems using Simulation Software (any three) Study and Analysis of Frequency hopped Spread Spectrum System Study and Analysis of Direct Sequence Spread Spectrum System Study and Designing of Equalizers for Digital Communication Study of Eye Pattern using Simulation Study and Implementation of Convolution Codes using Simulation Study and Implementation of Cyclic Codes using Simulation Method Study and Implementation of Linear Block Codes using Simulation Study and Implementation of Optimum Receiver used for Digital Communication Study and Implementation of Lempel Algorithm using Simulation Study and Design of Band Limited Signals with controlled ISI
Assessment:
End Semester Examination: Practical/Oral examination is to be conducted by pair of internal and external examiners
Subject Name
Credits 04
Module
1
Hours
10 DigitalSignal Processing,FrequencyDomainImageFilteringandEnhancement: 2-D signals and systems, 2D symmetry and periodicity,2D DFT, symmetry and other properties, 2-D FIR filters, frequency response, circular symmetry, Visual Perception and Color Spaces (1 week) Physiological characteristics of the eye and image formation, Human color vision 10 SpatialDomainImageEnhancementandFiltering&Restoration: Image decimation and interpolation, multi-resolution pyramids Image sampling, Spatio-temporal (M-D) sampling theory Edge detection, Image enhancement, Noise filtering, Image restoration:Image degradation model , Inverse Filtering , Wiener filtering 8 FundamentalsofimageCompressionEntropycoding: Lossless image compression, JPEG image compression, JPEG-2000 image compression, Multi-resolution and Wavelet Transform Video Processing: Video sampling, flicker, spatial frequency response, Motion modeling and estimation, Optical flow modeling and estimation, Block matching, feature matching, Parametric motion estimation, Video filtering , Deinterlacing, Denoising) Video Compression & Broadcasting Standards: MC-DCT video compression: MPEG-1, MPEG-2 video compression, H.263/MPEG-4 video compression: Compression efficiency, MPEG-4 AVC/H.264 video compression, Scalable video coding (SVC), Errorresilient compression, Video over IP Color models: Color models: CIE, RGB, CMYK, HSI, HSV, L*a*b* 8
1. Handbook of Image and Video Processing,Ed. Al Bovik, Academic Press, 2000. ISBN 0-12119790-5 2. Digital Image Processing,Gonzalez and Woods, Addison-Wesley, 2001. ISBN 0201-18075-8
Reference Books:
1. Multidimensional Signal, Image and Video Processing and Coding, J. W. Woods, Academic Press, 2006. ISBN 0-12-088516-6 2. Video Processing and Communications, Y. Wang, J. Ostermann, and Y.-Q. Zhang, Prentice Hall, 2002. ISBN 0-13-017547-1 3. Digital Video Processing,A. M. Tekalp, Prentice Hall, 1995. ISBN 0-13-190075-7
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination:
other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students. Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE 1012
04
Module 1
Introduction: Concept of simulation and modeling, Roles of Simulation, Types of Simulation, Limits of Simulation, Simulation Languages (High Level versus Low Level), Real-time Simulation Simulation Methodology Problem solving in Simulation Environment, Performance evaluation techniques, Parameters Estimation, What-if Questions, Design, Validation Error Sources in Simulation, Validation, Consistency . Replication, Elimination of Initial Bias, Variance Reduction Techniques Design of Simulation Experiment: Data Stream Selection, Simulation Length of Run, Simulation Sampling Frequency Digital Issues in Simulation Quantization, Number representation, Underflow, Overflow, Processing Delay, Signal Scaling Generation of Data Signals, Random Numbers and Processes Data Sources, Symbol Mapping, Pulse Shaping, Pseudo Random Numbers, Generation of Random Numbers, Generation of Random Variables using Common Distributions, Generation of Random Processes, Generation of Correlated Noise. Representation of Signals and Systems in Simulation Analog / Discrete, Baseband / Passband, Deterministic / Stochastic, Time Domain / Frequency Domain Elements of Communication Systems, Basic building blocks Monte Carlo Methods Fundamental Concepts, Monte Carlo Estimations, Monte Carlo Integration, Convergence,
Hours 08
08
3 4
08 08
08
08
References:
1. Simulation Techniques, Models of Communications, Signals and Process, F.M. Gardner, J.D. Baker, John Wiley & Sons Inc. 1997, ISBN 0-471-51764-9 2. Contemporary Communication Systems Using Matlab and Simulink, J.G. Proakis, M.Salehi, G.Bauch, CL-Engineering 2003, ISBN 0-534-40617-3.
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination:
other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE1013
Module
1
04
Hours
6 Motivation forAMS Design: Review of Moores law and CMOS scaling, benefits of system-on-chip integration in terms of cost, power, and performance. Comparison on System-on-Board, System-on-Chip, and System-in-Package. Typical goals in AMS design cost reduction, power reduction, design effort reduction, performance maximization. Productivity gap issues and the ways to improve the gap IP based design and design reuse. 10 Basics of Digital CMOS Design: Combinational MOS Logic circuits-Introduction, CMOS logic circuits with a MOS load, CMOS logic circuits, complex logic circuits, Transmission Gate. Sequential MOS logic Circuits - Introduction, Behaviour of hi stable elements, SR latch Circuit, clocked latch and Flip Flop Circuits, CMOS D latch and triggered Flip Flop. Dynamic Logic Circuits - Introduction, principles of pass transistor circuits, Dynamic CMOS circuit techniques 10 Basics of Analog CMOS Design: Basic integrated circuit building blocks, switches, active resistors, current source and sink, passive and active current mirror ,differential amplifier, output amplifier, two stage operational amplifier(OTA) analysis and design 12 Analog signal Processing circuits : Switched capacitive circuits General considerations, sampling switches ,Switched capacitor amplifier and integrator . Oscillator - types of oscillator, Voltage controlled oscillator . Simple PLL -Phase detector, Basic PLL topology ,Dynamics of PLL, Charged pump PLL 5 Short channel effects and device models: Scaling theory, short channel effects, MOS device models: Level1, Level2 and Level3,BSIM . Analog design in the digital world 5 AMS Design Flow: Design rules,Analog layout techniques, verification and integration, hardware-software co-design, interconnects, power management problems, and packaging related problems.
ReferenceBooks:
1. Jan M Abaey, Digital integrated Circuits :A design perspective, Prentice Hall of India Pvt Ltd . 2. R. JacbobBaker ,CMOS circuit design, layout and simulation, Wiley Publication 3.Yuan Taur, Fundamentals of Modern VLSI Devices, Cambridge University Press 4. Douglas A Pucknell& Kamran Eshragian,Basic VLSI Design, PHI 3rd Edition (original Edition 1994) 5. R. Best,Phase Locked Loops, second edition, New york;McGraw hill,1999
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE 1014
[
04
Hours 08
Module
1
Introduction: Origin of satellite communication, Development, Space segment,Ground segment, Types of orbit, Evolution of satellite communications,Development of service. Link Analysis: Characteristic parameters of an antenna, Received signal power at receiver input, Carrier to noise ratio fat the receiving input, Influence of the propagation medium, Compensation for the effects of the propagation medium constraints, Signal to noise ratio for a station-to-station link Regenerative Satellite Networks Transparent and regenerative repeaters, Comparison of link budgets on board processing, Impact to the earth segment. Orbits Keplerian orbitsUseful orbits for satellite communication. Perturbations of the orbits. Earth Stations : Station organization, Radio frequency characteristics, Antenna subsystems, Radio frequency subsystem, Communication subsystem. Communication Payload Mission and characteristics of the payload, Transparent repeaters, Multibeam satellite repeaters, Regenerative repeater , Antenna coverage, Antenna Characteristics. Platform Subsystems, Attitude control, Propulsion subsystem, Electric power supply, Telemetry, tracking and command, Thermal control and structure. Satellite Installation And Space Environment Installation in orbit, Vacuum,Mechanical environment, Radiation flux of high energy particles, Environment during installation, Satellite system availability, Component reliability.
10
10
08
08
08
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code ETE1021
SpeechProcessing
Contents SPEECH PRODUCTION AND ACOUSTIC PHONETICS
04
Module
Hours
The process of speech production, Acoustic theory of speech production, Digital models of speech signals of speech signal,Articulator phonetics, Acoustic Phonetics, Co- articulation, Prosody SPEECH ANALYSIS
10
Time and frequency domain analysis of speech, Linear predictive coding (LPC) analysis, Cepstral analysis, Speech parameter (pitch) estimation, SPEECH SYNTHESIS
08
Principles of speech synthesis, Articulatory synthesis, Formant synthesis and LPC synthesis CODING OF SPEECH SIGNALS
06
Introduction, Quantization, Speech redundancies, Time domain waveform coding, Linear predictive coding, Linear delta modulation, Adaptive delta modulation, Adaptive differential pulse code modulation, Filter bank analysis, Phase vocoders and Channel vocoders SPEECH ENHANCEMENT
10
Introduction, Nature of interfering sounds, speech enhancement techniques, spectral subtraction and filtering, harmonic filtering, Spectral subtraction, Adaptive noise cancellation
06
SPEECH RECOGNITION Introduction, Bayes rule, Segmental feature extraction, MFCC, DTW, HMM approaches for speech recognition
08
Recommended Books: Text: 1. Speech Communications: Human & Machine, Douglas O'Shaughnessy, Universities Press. 2. Digital Processing of Speech Signals, Rabiner and Schafer, Prentice Hall, 1978. References 1. Discrete-Time Speech Signal Processing: Principles and Practice , Thomas F. Quatieri , Publisher: Prentice Hall 2. Speech and Audio Signal Processing : Processing and Perception of Speech and Music , Nelson Morgan and Ben Gold, John Wiley & Sons 3. Speech Analysis Synthesis and Perception, J. L. Flanagan, Second edition, Springer-Verlag (1972). 4. Speech and Audio Signal Processing, Gold & Morgan, 1999, Wiley and Sons
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination:
other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code Subject Name Credits ETE1022 Micro Electro Mechanical Systems 04 Module Detailed content Hours 1 SWITCHING: 9 RF MEMS relays and switches: Switch parameters, Actuation mechanisms, Bistable relays and micro actuators, Dynamics of switching operation. 2 COMPONENTS I: MEMS inductors and capacitors: Micromachined inductor, Effect of inductor layout, Modeling and design issues of planar inductor, Gap tuning and area tuning capacitors, Dielectric tunable capacitors. COMPONENTS - II MEMS phase shifters: Types. Limitations, Switched delay lines, Micromachined transmission lines, coplanar lines, Micromachined directional coupler and mixer. FILTERS Micromachined RF filters: Modeling of mechanical filters, Electrostatic comb drive, Micromechanical filters using comb drives, Electrostatic coupled beam structures. ANTENNAS Micromachined antennas: Microstrip antennas design parameters, Micromachining to improve performance, Reconfigurable antennas. 9
10
10
10
REFERENCES: 1. V.K.Varadanetal, RFMEMS and their Applications,John Wiley & Sons, Ltd, 2003. 2. H.J. De LOS SANTOS, RF MEMS circuit Design for Wireless Communications, Artech House, 2002. 3. G.M.REBEIZ, RF MEMS Theory, Design and Technology, John Wiley& Sons, Ltd, 2003. Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE1023
Embedded Systems
Detailed content
04
Hours
04
Module
1
EMBEDDED ARCHITECTURE
Embedded Computers Characteristics of Embedded Computing Applications Challenges in Embedded Computing system designEmbedded memories Embedded System design process Requirements Specification Architectural Design Designing Hardware and Software Components System Integration Design Example 08 EMBEDDED PROCESSOR AND COMPUTING PLATFORM MSP 430 RISC Controllers, parallel I/O, external interrupts. ARM processor fundamentals introduction to ARM and THUMB instruction set--processor and memory organization CPU Bus configuration ARM Bus Memory devices Input/output devices Component interfacing designing with microprocessor development and debugging Design Example. Instruction set with enhanced DSP features with ARM core, mix mode programming as Thumb+ ARM core, Assembly programming concept, compare with ARM7, ARM9, ARM11 with new features additions. INTERFACING Sensors and interfacing techniques, Analog interfacing and data acquisition , Timing generation and measurements, --Distributed Embedded Architecture Networks for Embedded Systems- serial bus protocols like I2C, RS485, CAN and USB--wireless protocols and interfacing of IRDA and SMART card Design Example wireless protocols and interfacing of IRDA and SMART card Serial communications: I2C CAN Bus Design Example REAL TIME CONCEPTS
08
08
Real-time concepts, hard and soft real time systems, real-time operating systems, Required RTOS services/capabilities (in contrast with traditional OS). Resource Management/scheduling paradigms: static priorities, static schedules, dynamic scheduling Real-world issues: blocking, unpredictability, interrupts, caching, Examples of OSs for embedded systems 08 SYSTEM DESIGN
Design Methodologies Requirement Analysis Specification System Analysis and Architecture Design modeling techniques --Testing and debugging ---Quality Assurance Design Example: Data base applications (smart cards), process-control (Fuzzy logic), robotics (wireless), CCD camera (data compression), network appliances (e-server), MSP 430 applications e.g. electricity metering, wireless communication, capacitive touch screen as examples of embedded systems. $- Common for Electronics and Telecommunication Engineering and Electronics Engineering
References: 1. Introduction to Embedded Systems, Jonathan W. Valvano , Cengage 2009, 2. ARM System Developer's Guide, 1st Edition, Sloss&Symes& Wright , 2004, Morgan Kaufmann 3. Embedded Real Time Systems: Concepts, Design & Programming, Dr.K.V.K.K. Prasad, Dreamtech Publication. 4. Introduction to embedded systems, shibu k v, 2009, McGraw-Hill 5. An Embedded Software Primer, David E. Simon, Pearson Education Publication. 6. Embedded Systems-James K Peckol(Wiley) 7. Embedded Systems Design, 2nd Edition, S Heath, 2002 , Newnes Publication 8. Building Parallel, Embedded, and Real-Time Applications with Ada, John W. McCormick Frank Singhoff , JrmeHugues , Cambridge University Press 9. TEXAS MSP430, ARM Technical Publications 10. Embedded system design by Frank Vahid& Tony Givargis, Pearson Education 11. KriteeRamamritham Real Time Operating Systems, IEEE Press
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
ETE1024 Module
1 2 3 4
Credits
04
Hours 04 06 04 06
8 9
ITU NGN standards and architectures -Main drivers to Next Generation Networks NGN , ITU NGN standards All-IP network concept for NGN , NGN control architectures and protocols (TISPAN) Numbering, naming and addressing for all NGN NGN Services:Technology,Business and Regulatory Aspects --Services and service capabilities in NGN (VoIP,IPTV, rich multimedia, future web) , Quality of Service (QoS), Quality of Experience (QoE) in NGN Control and Signaling protocols for NGN (SIP,Diameter) , NGN security (AAA, identity management) , Service convergence , Business and regulatory aspects of NGN Mobile Next Generation Networks Next Generation Mobile Networks (LTE, WiMaXAdvanced) , Fixed-Mobile Convergence (FMC) in NGN, IP Multimedia Subsystem (IMS) for NGN Mobility Management in NGN (terminal, personal, session, and service mobility), Next Generation mobile services (mobile TV, Mobile rich multimedia, presence, location-based and content-based services Transition to NGN and future evolution: Migration of PSTN networks to NGN , Transition of IP networks to NGN , Carrier grade open environment NGN business challenges , Future packet based network (IPv6 NGN) , NGN evolution
04
06
06
06 06
Text Books :
1. 2. 3. 2 Wireless Communications - Theodore S. Rappaport, Prentice Hall of India, PTR publication Principles of Wireless Networks-KavehPahlavan, Prashant Krishnamurthy, PHI Wireless communication and Networking-Vijay Garg, ELSEVIER Inc. TCP/IP Protocol Suite -Forouzan-Fourth Edition-Tata Mc
Reference Books: 1. Wireless Communication - Singal_- TMH 2. Next Generation Wireless Systems and Networks: Hsiao Hwa Chen, Mohsen Guizani Wiley 3. Wireless and Mobile Networks-Concepts and protocols: DrSunilkumar S. Manvi, Mahabaleshwar S.
Kakkasageri-- Wiley
4. IP-Based Next-Generation Wireless Networks: Systems, Architectures, and Protocols- Jyh- Cheng Chen
and Tao Zhang- Wiley 5. Fundamentals of Wireless Communication- David Tse&PramodViswanath- Cambridge University press
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETC 201
04
Hours 08
Module
1
2 3 4 5 6
08
08
08
08
08
1. DigitalCommunicationbyJohnG.Proakis,3rdEditionMcGrawHillInternationalEditions.
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETC 202
04
Hours 06
Module
1
2 3 4 5
08
08
10
08
Emerging Wireless Network Technology IEEE 802.11 WLAN ETSI HIPER LAN Technology IEEE 802.15 WPAN Technology IEEE 802.16 WMANTechnology Mobile Adhoc Network Mobile IP and Mobility Management Mobile TCP Wireless Sensor Networks RFID Technology
08
Text & Reference Books: 1) Mobile & Personal Communication system & Services by Raj Pandya , Prentice Hall of India (PHI) Private Limited 2) Wireless Communication by T.L..Signal ,Tata McGraw Hill Publication. 3) Wireless Communication Principles & Practice by Rappaport Theodore S., Pearson education 2nd edition.
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETC203
Module
1
04
Hours
8
10
ADVANCED BEAM STEERING AND BEAM FORMING: The Need for Beam-Steering/Beam-Forming, Adaptive Frame Structure, Advanced Beam Steering Technology, Advanced Antenna ID Technology, Advanced Beam Forming Technology. SINGLE-CARRIER FREQUENCY DOMAIN EQUALIZATION: Advantages of SC-FDE over OFDM for Millimeter Wave Systems, Preamble Design, Adaptive Channel Estimation, Frequency Domain Equalization, Decision Feedback Equalization.
References
1. Millimeterwave communication systems. Huang K., Wang Z., Wiley-IEEE Press, 2011 2. Advanced Electronic Communication Systems. W Tomasi , PHI, 1988 3. Electronic Communication Systems, II Edition,Roy Blake Thomsar 4. Electronic Communication, Kemealy & Dakis, TMH Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETL201
01
Module
8 9 10 11 12
Study of GSM Technology using Simulation Software Study of CDMA Technology using Simulation Software Study of 3G Technology like WCDMA using Simulation Software Case study of Sim Card Case study of Mobile Handset used for 2G and 3G Technology Case study of Frequency Planning in 2G Technology Case study of Close Loop and Open Loop Power Control of Mobile Phone in 2G Technology Case study on In-building Solutions Study and Implementation of WLAN using Simulation Method Study and Implementation of WPAN using Simulation Method Case Study for RFID Technology Study and Implementation of RAKE Receiver using Simulation Method
Assessment:
End Semester Examination:
Subject Code
Subject Name
Credits
ETL202
01
Module
1 2 3 4 5 6 7 8 9 10 11 12
Design and Analysis of Half and Full Dipole Antenna Radiation Pattern for the Broadside and End Fire Array Simulation and Understanding the Pattern Multiplication Technique in End Arrays Synthesis of Antenna for Low Side Lobes and Narrow Beam. Design and Simulation of Rectangular and Circular Microstrip Antenna Simulation of Broadband Antennas Design and Simulation of Shorted Microstrip Antenna Simulation of Radiation Pattern for Monopole Antennas Smart Antennas for Cell Phone / Mobile Phones Case Study for the Antennas using Satellite Communication Case Study for the Antennas using Radar Communication Case Study for the Antennas using Navigation and Instrument Landing System
Assessment:
End Semester Examination:
Subject Code
Subject Name
Credits
ETE2031
Module
04
Hours
INTRODUCTION TO ADAPTIVE SYSTEMS AND BASICS OF ESTIMATIONTHEORY 1 Definitions, Characteristics, Applications, Examples of adaptive systems, Gradient error, least absolute deviation, least mean square minimization, Mean square error, Cramer Rao bound, Maximum likelihood estimate(MLE) NON ADAPTIVE FILTERS Wiener filtering, LLSE, Principle of orthogonality, Wiener-Hopf equation, Solution of Wiener Hopf equation, Error performance surface and MMSE. Levinson filtering, Levinson-Predictor, Levinson-Durbin Recursion, Gram-Schmidt orthogonalisation, Kalman filtering and its derivation ADAPTIVE FILTERS 3 Principle of adaptive filters, Method of steepest decent, Newtons type of algorithm, LMS algorithm and its applications, Convergence of LMS algorithm, Normalized LMS(NLMS),RLS algorithm, convergence analysis of RLS algorithm, Application of RLS algorithm ADAPTIVE EQUALISATION 4 Decision feedback equalizer, Adaptive blind equalizer, Sato algorithm, Constant modulus algorithm, CM equalizer and carrier tracking APPLICATION OF ADAPTIVE FILTERS 10 15 08
10
Echo cancellation, Equalisation of data communication channels, Linear predictive coding and Noise cancellation
05
Recommended Books: Text: 1. Adaptive Filter Theory, S. Haykin, Prentice-Hall, 4-th edition 2. Statistical and Adaptive Signal Processing, Manolakis, D. G., Ingle, V. K., and Kogon, S. M. (2005), Artech House INC., 2005. References 3. Adaptive Signal Processing, B. Widrow, S. Stearns, Prentice-Hall, 1985 4. Adaptive signal processing Theory and Applications , S Thomas Alexander,Springer-Verlag 5. Adaptive filters- A H Sayed, John Wiley
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE2032
Nano-electronics
Detailed content
04
Module
1
Hours Review of VLSI: basic CMOS Process flow, MOS Scaling theory, Issues in 06
scaling MOS transistors, Short channel effects,Introduction to Nano electronics, requirements for Non classical MOS transistor, Nano devices, Nano materials, Nano characterization. MOS capacitor, Role of interface quality and related process techniques, Gate oxide thickness scaling trend, SiO2 vs High-k gate dielectrics. Integration issues of high-k.Interface states, bulk charge, band offset, stability, reliability, CV and IV techniques. Metal gate transistor: Motivation, requirements, Integration Issues.Transport in Nano MOSFET, velocity saturation, ballistic transport, injection velocity, velocity overshoot. SOI - PDSOI and FDSOI.Ultrathin body SOI - double gate transistors, integration issues. Circuit Design with SOI. SOI based SRAM design. Vertical transistors - FinFET and Surround gate FET. Carbon nanotube electronics, bandstructure & transport, devices, applications. Circuit design with FinFET and CNTFET. SRAM design. Germanium Nano MOSFETs: strain, quantization, Advantages of Germanium over Silicon, PMOS versus NMOS. Compound semiconductors - material properties, MESFETs Compound semicocnductors MOSFETs in the context of channel quantization and strain, Hetero structure MOSFETs exploiting novel materials, strain, quantization.
10
06 08 12 06
4 5
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Credits 04 Hours
3
Broadband microstrip antennas Introduction, Mechanism of Parasitic Coupling for Broad BW, Gap-Coupled RMSAs, Radiating-Edge Gap-Coupled RMSAs, Nonradiating-Edge Gap-Coupled RMSAs, Gapand Hybrid-Coupled MSA,Multilayer Broadband MSA, Electromagnetically Coupled MSAs, stack multi resonator MSA , Design Examples. Compact microstrip antennas Introduction, Compact Shorted RMSAs, Partially Shorted RMSAs, Effect of Dimensions of RMSAs with a Single Shorting Post, Effect of the Position of the Single Shorting Post, Compact Shorted CMSA and Its Variations. Planar monopole antennas Introduction, Planar Rectangular and Square Monopole Antennas, RMSA Suspended in Air with Orthogonal Ground Plane, Calculation of the Lower Frequency of the Planar Monopole Antennas, Effect of Various Parameters of Planar Rectangular Monopole Antennas, Radiation Pattern of RM Antennas, Various Planar RMs with Equal Areas, Planar Circular Monopole Antennas. Smart antennas Introduction, Smart-Antenna Analogy, Cellular Radio Systems Evolution, Signal Propagation,Smart Antennas Benefits and draw backs,Antenna Beam forming, Multiple-Input Multiple-Output (MIMO) System, Reconfigurable Arrays
References
1. 1.Broadband Microstrip antennas Girish Kumar and K.P. Ray, Artech House 2. Antenna Theory- C. A. Balanis- Wiley and sons 3. Antennas John. D. Krauss- TMH ed. 4. Antenna Arrays: A Computational Approach By Randy L. 5. Haupt, John Wiley and Sons
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Name
Credits 04
Optical Networks
Module
Detailed Content SONET & SDH: Brief history of SONET& SDH, Multiplexing hierarchy, Multiplexing structure Functional components, Problem detection, Virtual tributaries & containers, Concatenation. Architecture of OTN: Digital wrapper, control planes, Control signaling, Multiplexing, hierarchies, Current digital hierarchy, revised hierarchies, Optical & Digital Transporthierarchies, Functionality stacks, Encapsulation & Decapsulation, GFP. WDM, DWDM Topologies : Relationship with SONET / SDH, EDF, WDM Amplifiers, Multiplexers, WADM I/P & O/P ports, spanloss & chromatic, dispersion, TunableDWDM lasers Network Topologies & Protection schemes : Non-negotiable requirements of robust networks, Line & Path protection switching, Type of Topologies, Optical Channel Concatenation, Meshed topologies, PONs, Optical Ethernets, Wide area Backbones,Metro optical networking MPLS & Optical networks: Label switching, FEC, Scalability & granuility: labels & wavelength, MPLS nodes, Distribution & Binding methods, MPLS support of virtual private networks, Traffic Engineering, MPLS, Relationships of OXC, MPLS operation, MPLS & optical Traffic Engineering, Similarities. Control & Dataplanes interworking Architecture of IP & MPLS based optical transport Networks : IP, MPLS & Optical control planes Interworking, The three control planes, Framework for IP Vs. Optical networks, Generalized MPLS use in optical networks, Bidirectional LSPs in optical network, Next horizon of GMPLS, ODVK General communication channels, Traffic parameters Link Management protocol ( LMP) : What is managed, Data Bearing links, Basic function of LMP, LMP messages, LMP message header, TLWs control channelManagement, LPC, LCV, Fault management, Extending LMP operations to optical links. Optical compilers : Building blocks, Serial Binary adder with carry delay, Fiber delay line memory loop, Bit serial, optical counter design, Lumped delay design, Distributed delay design, Time multiplex multiprocessor, Time slot interchange with 2 log 2 (N-1) switch, Hatch design support system
Hours 04
06
08
06
08
05
06
05
Text Books: 1. R.Ramaswami,K.N.Sivarajan, Optical Networks,Elsevier, 2002. 2. P.E Green, Optical Networks Prentice Hall, 1994. 3. Opto Electronic-Computing System by Jordan 4. Uyless Black Optical Networks Third Generation Transport Systems Prentice Hall Reference Books 1. C.S.Murthy & M.Gurusamy, WDM Optical Networks,PHI,2002. 2. TanenbaumAndrew S Computer Networks Prentice Hall(India).
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Name
Credits
Wavelets
Contents Introduction to time frequency analysis; conventional methods like Fourier transform their limitations andthe how, what and why about wavelets. Short-time Fourier transform, Wigner-Ville transform. Properties and mathematical conditions of wavelet functions. Some popular wavelet functions. Continuous time wavelet transform, Discrete wavelet transform, tiling of the time-frequency plane and wavepacket analysis. Construction of wavelets. Multiresolution analysis. Introduction to frames and biorthogonal wavelets. Multirate signal processing and filter bank theory. Application of wavelet theory in to signal denoising, image and video compression, multi-tone digital communication, transient detection. Commercial applications in which wavelet approach is established.
04 Hours 7
10
10
5 6
8 6
Text Books: 1. Y.T. Chan, Wavelet Basics, Kluwer Publishers, Boston, 1993. 2. M. Vetterli and J. Kovacevic, "Wavelets and Sub-band Coding," Prentice Hall, 1995.
[
References: 1. 2. 3. 4. 5. 6. I.Daubechies, Ten Lectures on Wavelets, Society for Industrial and Applied Mathematics, Philadelphia, PA, 1992. Gerald Kaiser, A Friendly Guide to Wavelets, Birkhauser, New York, 1995. P. P. Vaidyanathan, Multirate Systems and Filter Banks, Prentice Hall, New Jersey, 1993. S. Mallat, "A Wavelet Tour of Signal Processing," Academic Press, Second Edition, 1999. G. Strang and T. Q. Nguyen, "Wavelets and Filter Banks," Wellesley-Cambridge Press, Revised Edition, 1998. B.Boashash, Time-Frequency signal analysis, In S.Haykin, (editor), Advanced Spectral Analysis, Prentice Hall, New Jersey, 1991.
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE2042
Cloud Computing
Detailed content
04
Hours 06
Module
1
Overview of Distributed Computing Definition, Goals, H/W Concepts, S/W Concepts, Client-Server Model. Synchronization: Clock Synchronization, Logical Clocks, Global State. Distributed File System: NFS, CODA, XFS. Distributed Parallel computing System, Scalable Computing towards Massive Parallelism. Introduction to Cloud Computing Whats Cloud Computing, NIST Definition, properties and Service Model, Characteristics, Components, Cloud provider, SAAS, PAAS, IAAS and Others, Organizational scenarios of clouds, Administering & Monitoring cloud services, benefits and limitations, Deploy application over cloud, Comparison among SAAS, PAAS, IAAS. Cloud computing platforms: Infrastructure as service: Amazon EC2,Platform as Service: Google App Engine, Microsoft Azure, Utility Computing, Elastic Computing. Cloud Technologies Web services, AJAX and mashups: Web services: SOAP and REST, SOAP versus REST, AJAX: asynchronous 'rich' interfaces, Mashups: user interface services Virtualization Technology: Virtual machine technology, virtualization applications in enterprises, Pitfalls of virtualization. Multitenant software: Multi-entity support, Multi-schema approach, Multitenance using cloud data stores, Data access control for enterprise application. Issues in cloud Computing Implementing real time application over cloud platform, Issues in intercloud environments, QoS Issues in cloud, Dependability, data Migration, streaming in cloud, QoS monitoring in cloud computing environment. Cloud Middleware, A grid of clouds, Load Balancing in cloud, Sky Computing, resource optimization, resource dynamic reconfiguration.
SecurityarchitectureandChallenges
08
08
08
06
Architectural Considerations- General Issues, Trusted Cloud computing, Secure Execution Environments and Communications, Micro-architectures; Identity Management and Access control-Identity management, Access control, Autonomic Security. Virtualization security management- virtual threats, VM Security Recommendations, VM-Specific Security techniques, Secure Execution Environments and Communications in cloud. 6 Programming support of Google App Engine Programming the Google App Engine, Google file system(GFS), Bigtable, Googles NOSQL system. Chuby, Googles Distributed lock service. Programming on Amazons AWS and Microsoft Azure Programming on Amazon EC2, Amazon simple storage service(S3), Amazon Elastic block store(EBS), and SimpleDB. Microsoft AzureProgramming support.
06
06
Text Books: 1."Distributed Systems: Principles and Paradigms, 2nd Edition", by Andrew S. Tanenbaum, Maarten van Steen, ISBN: 01323-92275, Prentice Hall, 2006. 2.Distributed And Cloud Computing From parallel processing to the internet of things , Kai Hwang, Geoffrey C. Fox, Jack J. Dongarra, ISBN : 9780123858801, ELSEVIE MK publishers, 2011. Reference Books 1. Cloud Computing for Dummies, by Judith Hurwitz, R.Bloor, M.Kanfman, F.Halper (Wiley India Edition) 2. Enterprise Cloud Computing, by Gautam Shroff,Cambridge 3. Cloud Computing : A Practical Approach, by Antohy T Velte, et.al McGraw Hill. 4. Google Apps, by Scott Granneman,Pearson.
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE2043
Module
1
04
Hours
12
12
12
12
References 1. Dan E. Dugeon and Don H. Johnson. (1993). Array SignalProcessing: Concepts and Techniques. Prentice Hall. 2. PetreStoica and Randolph L. Moses. (2005, 1997) Spectral Analysis of Signals. Prentice Hall. 3. Prabhakar S. Naidu. (2000). Sensor Array SignalProcessing: CRC Press.
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students.Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETE2044
Network Security
Detailed content
04
Hours 8 12
Module Introduction 1 2
3 4
5 6
Introduction to Information Security, Network Security Domains Security Architecture Enterprise Security Architecture, Network LAN/WAN & User Access Security, Cryptography and Cryptanalysis, Various Security Protocols, Network Security Audit / Security RISK Management, Security Operations. Security Mechanisms for Network Defense and Countermeasures Telecommunications Overview, Equipment Security Testing, Core Network Security Testing, Regulation, TRAI, Telecom License Security in Networks Network security basics, TCP/IP Model and Port no., Protocol flaws, Enterprise wide network Design and Vulnerabilities. Reconnaissance of network, Packet sniffing, Session Hijacking, ARP Spoofing Web site and web server vulnerabilities, Denial of Service, SSL and IPSec protocol Firewall, intrusion detection system and Honey pots. Introduction to Biometrics for Security Signature verification,Finger print recognition,Voice recognition, Iris recognition system. Legal,Privacy, and Ethical Issues in Network Security Protecting programs and data, Information and law, Rights of employees and employers, Software failures, Computer crime, Privacy, Ethical issues in computer society, Case studies of ethics.
10 6
6 6
References: 1. Stallings, Cryptography and Network Security: Principles and Practice 2. C.P. Pfleeger and S.L.Pfleeger, Security in Computing, Pearson Education 3. Matt Bishop, Computer Security: Art and Science, Pearson Education 4. Kaufman, Perlman, Speciner, Network Security 5. Eric Malwald, Network Security: A Beginners Guide, TMH 6. Bruce Schneier, Applied Cryptography, John Wiley 7. Macro Pistoia , Java network security, Pearson Education 8. Whitman, Mattord, Principles of Information security, Thomson 9. Cryptography and Data Security, D Denning, Addison Wesley
Assessment: Assessment consists of two tests out of which; one should be compulsory class test and the Internal:
End Semester Examination: other is either a class test or assignment on live problems or course project. Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students. Minimum 80% syllabus should be covered in question papers of end semester examination.
Subject Code
Subject Name
Credits
ETS301
Seminar
03
Guidelines for Seminar o Seminar should be based on thrust areas in Electronics and Telecommunication Engineering o Students should do literature survey and identify the topic of seminar and finalize in consultation with Guide/Supervisor. Students should use multiple literature and understand the topic and compile the report in standard format and present infront of Panel of Examiners appointed by the Head of the Department/Institute of respective Programme. o Seminar should be assessed based on following points Quality of Literature survey and Novelty in the topic Relevance to the specialization Understanding of the topic Quality of Written and Oral Presentation IMPORTANT NOTE: 1. Assessment of Seminar will be carried out by a pair of Internal and External examiner. The external examiner should be selected from approved panel of examiners for Seminar by University of Mumbai, OR faculty from Premier Educational Institutions /Research Organizations such as IIT, NIT, BARC, TIFR, DRDO, etc. OR a person having minimum Post-Graduate qualification with at least five years experience in Industries. 2. Literature survey in case of seminar is based on the broader area of interest in recent developments and for dissertation it should be focused mainly on identified problem. 3. At least 4-5 hours of course on Research Methodology should be conducted which includes Literature Survey, Problems Identification, Analysis and Interpretation of Results and Technical Paper Writing in the beginning of 3rd Semester.
Subject Code
Subject Name
Credits
ETD301 / ETD401
12 + 15
Guidelines for Dissertation o Students should do literature survey and identify the problem for Dissertation and finalize in consultation with Guide/Supervisor. Students should use multiple literature and understand the problem. Students should attempt solution to the problem by analytical/simulation/experimental methods. The solution to be validated with proper justification and compile the report in standard format. Guidelines for Assessment of Dissertation I o Dissertation I should be assessed based on following points Quality of Literature survey and Novelty in the problem Clarity of Problemdefinition and Feasibility of problem solution Relevance to the specialization Clarity of objective and scope o Dissertation I should be assessed through a presentation by a panel of Internal examiners appointed by the Head of the Department/Institute of respective Programme. Guidelines for Assessment of Dissertation II o Dissertation II should be assessed based on following points Quality of Literature survey and Novelty in the problem Clarity of Problemdefinition and Feasibility of problem solution Relevance to the specialization or current Research / Industrial trends Clarity of objective and scope Quality of work attempted Validation of results Quality of Written and Oral Presentation o Dissertation II should be assessed through a presentation jointly by Internal and External Examiners appointed by the University of Mumbai Students should publish at least one paper based on the work in reputed International / National Conference (desirably in Refereed Journal)