Rsni3: Pertukaran Data Lintang, Bujur, Dan Tinggi Lokasi Geografis

RSNI3
Standar Nasional Indonesia
Pertukaran data lintang, bujur, dan tinggi lokasi geografis
ICS 35.040
Badan Standardisasi Nasional
Daftar Isi
Daftar isi i Prakata ii 0 1 2 2.1 2.2 2.3 2.4 3 4 Pendahuluan 1 Lingkup dan bidang aplikasi 1 Ketentuan penyajian lintang, bujur dan tinggi 1 Lintang 2 Bujur 2 Tinggi 3 Format 3 Sistem referensi koordinat 3 Contoh 4
Lampiran A 8 Bibliografi 9
Prakata
Standar ini adalah hasil adopsi dengan modifikasi dari Standar Internasional ISO 6709:1983 versi E, Standard representation of latitude, longitude and altitude for geographic point locations. Panitia Teknis yang bertanggung jawab untuk standar ini adalah Panitia Teknis 07-01, Bidang Informasi Geografi/Geomatika. Dalam teks standar ini dilakukan perubahan editorial sebagai berikut: a. kata standar internasional diganti dengan standar nasional ; b. lampiran informatif ditambahkan untuk memberi petunjuk bagi pengguna.
ii
Pertukaran data lintang, bujur, dan tinggi lokasi geografis
Pendahuluan
Pertukaran data yang efisien untuk lokasi geografis memerlukan format yang secara umum dapat diinterpretasikan. Format tersebut harus memiliki identifikasi yang unik dari titik lokasi geografis yang berada di atas, di bawah atau pada permukaan bumi. Pengguna dalam berbagai bidang disiplin yang berbeda dapat memiliki persyaratan yang berbeda. Secara umum penyajian lintang dan bujur menggunakan derajat, menit dan detik. Penyajian ini dapat ditambahkan dengan desimal derajat, desimal menit dan desimal detik. Pengguna dapat juga membutuhkan ketelitian derajat yang berbeda dan menggunakan lintang dan bujur tanpa informasi ketinggian. Standar nasional ini menetapkan format panjang variabel yang memiliki fleksibilitas untuk mengakomodasi persyaratan-persyaratan yang berbeda. Penggunaan standar nasional ini akan : a) mengurangi biaya pertukaran data; b) mengurangi waktu yang dibutuhkan dalam mengkonversi struktur kode yang tidak standar dengan menyediakan standar format pertukaran.
1 Lingkup dan bidang aplikasi

Standar nasional ini menetapkan format panjang variabel untuk penyajian lintang, bujur dan tinggi dalam penggunaan pertukaran data. Penyajian tinggi merupakan suatu pilihan, ada atau tidaknya adalah implisit dalam format tersebut. Standar nasional ini dapat menggunakan notasi umum seksagesimal yang terdiri atas derajat, menit, dan detik, sebagai kombinasi dari seksagesimal dan notasi desimal yaitu derajat dan desimal derajat; derajat, menit dan desimal menit; derajat, menit, detik, dan desimal detik. Notasi tersebut menggunakan karakter-karakter angka 0-9, positif (+), negatif (-), dan titik (.). Standar nasional ini tidak menetapkan penggunaan format panjang field secara pasti, karena hal ini membutuhkan persetujuan terlebih dahulu dari pihak-pihak yang terlibat dalam pertukaran data, meskipun format panjang field tersebut sesuai dengan format dalam standar nasional ini. Standar nasional ini tidak membutuhkan prosedur internal khusus, teknik pengorganisasian file, media penyimpanan, bahasa dan sebagainya untuk digunakan dalam implementasinya.
2
2.1
Ketentuan penyajian lintang, bujur dan tinggi

Lintang
2.1.1 Posisi lintang di sebelah utara khatulistiwa diberikan tanda positif (+), posisi lintang di sebelah selatan khatulistiwa diberikan tanda negatif (-), dan posisi lintang pada garis khatulistiwa diberi tanda positif (+).
1 dari 9
2.1.2 Dua digit pertama dari lintang-lintang tersebut merepresentasikan derajat. Digit-digit berikutnya menjelaskan menit, detik, atau pecahan desimal sesuai dengan kesepakatan selanjutnya, dalam hal ini tanda desimal titik (.) menunjukkan perubahan dari sistem seksagesimal menjadi sistem desimal: Derajat dan derajat desimal: DD.DD Derajat, menit, dan menit desimal: DDMM.MMM Derajat, menit, detik, dan detik desimal: DDMMSS.SS 2.1.3 Apabila nilai derajat kurang dari 10 maka angka 0 disisipkan di depan nilai derajat tersebut, dan jika menit atau detik kurang dari 10 maka angka-angka 0 ditambahkan pada posisi yang sesuai. 2.2 Bujur
2.2.1 Posisi bujur di sebelah timur Greenwich diberikan tanda positif (+), posisi bujur di sebelah barat Greenwich diberikan tanda negatif (-). Meridian 0 diberikan tanda positif (+). Meridian 180 diberikan tanda negatif (-). 2.2.2 Tiga digit pertama dari bujur-bujur tersebut merepresentasikan derajat. Digit-digit berikutnya menjelaskan menit, detik atau pecahan desimal sesuai dengan kesepakatan selanjutnya, dalam hal ini tanda desimal titik (.) menunjukkan perubahan dari sistem seksagesimal menjadi sistem desimal: Derajat dan derajat desimal: DDD.DD Derajat, menit, dan desimal menit: DDDMM.MM Derajat, Menit, detik, dan desimal detik: DDDMMSS.SS 2.2.3 Apabila nilai derajat kurang dari 100 maka angka-angka 0 disisipkan di depan nilai derajat tersebut, dan jika menit atau detik kurang dari 10 maka angka 0 ditambahkan pada posisi yang sesuai.
2 dari 9
2.3
Tinggi
2.3.1 Penyajian tinggi merupakan pilihan. Jika tinggi disajikan harus sesuai dengan subpasal 2.3.2 dan 2.3.3. 2.3.2 Posisi tinggi di atas datum referensi vertikal diberikan tanda positif (+), tinggi di bawah datum referensi vertikal diberikan tanda negatif (-). Posisi tinggi pada datum referensi vertikal diberikan tanda positif (+).
CATATAN Datum referensi vertikal dapat menggunakan permukaan laut.
2.3.3 Posisi tinggi disajikan dalam meter dan menggunakan pecahan-pecahan desimal bila diperlukan.
CATATAN Sebagai alternatif, kaki (feet) dapat digunakan, tetapi harus disebutkan pada dokumentasidokumentasi yang berhubungan dengan pertukaran data tersebut.
2.4
Format
2.4.1 Format penyajian lokasi geografis diurutkan sebagai berikut: a) Lintang b) Bujur c) Tinggi, jika disajikan 2.4.2 Tanda + atau - yang dimiliki bilangan, diletakkan di depan bilangan tersebut. 2.4.3 Jumlah digit angka untuk lintang, bujur, dan tinggi menunjukkan ketelitian data yang ada. 2.4.4 Lintang dan bujur untuk sebuah titik tertentu dinyatakan dalam format dan ketelitian yang sama. Hal ini tidak berlaku untuk tinggi. 2.4.5 Tidak ada tanda pemisah antara unsur lintang, bujur dan tinggi.
CATATAN Penggunaan tanda + dan - di depan bilangan pada setiap unsur dapat dikenali sebagai bagian awal setiap unsur.
2.4.6 Rangkaian titik lokasi harus diberi tanda akhir. Karakter tanda akhir tersebut adalah (/), kecuali jika tanda yang lainnya sudah ditentukan dalam dokumen yang berhubungan dengan pertukaran tersebut.
Sistem referensi koordinat
Informasi sistem referensi koordinat dicantumkan dalam file tambahan terhadap file utama yang berisi file koordinat. Informasi ini terdiri dari identitas titik dan identitas sistem referensi koordinat. Integrasi file koordinat dengan sistem referensi koordinat memperhatikan rekomendasi ISO 19111.
3 dari 9
Contoh
Contoh rangkaian titik lokasi yang sesuai dengan standar ini disajikan pada Tabel 1 dan Tabel 2. Tanda titik pada format penulisan dalam Tabel 1 dan Tabel 2, dibaca menjadi koma pada cara pembacaan.
4 dari 9
Tabel 1. Contoh rangkaian titik lokasi dengan informasi lintang dan bujur No. 1 2 Satuan lintang dan bujur derajat derajat dan derajat desimal Format penulisan +03+106/ +03.20361+106.00417/ Cara pembacaan tiga derajat lintang utara, seratus enam derajat bujur timur tiga koma dua nol tiga enam satu derajat lintang utara, seratus enam koma nol nol empat satu tujuh derajat bujur timur tiga derajat dua belas menit lintang utara, seratus enam derajat nol menit bujur timur tiga derajat dua belas koma dua dua menit lintang utara, seratus enam derajat nol koma dua lima menit bujur timur tiga derajat dua belas menit tiga belas detik lintang utara, seratus enam derajat nol menit lima belas detik bujur timur dua derajat nol nol menit nol nol detik lintang utara, delapan puluh lima derajat nol menit nol detik bujur barat tiga derajat dua belas menit tiga belas koma satu detik lintang selatan, seratus enam derajat nol menit lima belas koma satu detik bujur timur dua derajat nol menit nol koma satu detik lintang utara, delapan puluh lima derajat nol menit nol koma satu detik bujur timur
3 4
5 dari 9
derajat dan menit derajat, menit, dan desimal menit
+0312+10600/ +0312.22+10600.25/
derajat, menit, dan detik
+031213+1060015/
derajat, menit, dan detik
+020000-0850000/
derajat, menit, detik dan desimal detik
-031213.1+1060015.1/
derajat, menit, detik dan desimal detik
+020000.1+0850000.1/
Tabel 2. Contoh rangkaian titik lokasi dengan informasi lintang, bujur dan tinggi No. 1 Satuan Lintang, Bujur dan Tinggi derajat dan meter Format Penulisan +03+106+350/ Cara Pembacaan tiga derajat lintang utara, seratus enam derajat bujur timur, tiga ratus lima puluh meter di atas permukaan referensi vertikal tiga koma dua nol tiga enam satu derajat lintang utara, seratus enam koma nol nol empat satu tujuh derajat bujur timur, tiga ratus lima puluh koma lima ratus tujuh belas meter di atas permukaan referensi vertikal tiga derajat dua belas menit lintang utara, seratus enam derajat nol menit bujur timur, seratus enam puluh sembilan koma dua meter di bawah permukaan referensi vertikal tiga derajat dua belas koma dua dua menit lintang utara, seratus enam derajat nol koma dua lima menit bujur timur, seratus enam puluh sembilan koma dua meter di bawah permukaan referensi vertikal tiga derajat dua belas menit tiga belas detik lintang utara, seratus enam derajat nol menit lima belas detik bujur timur, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal dua derajat nol nol menit nol nol detik lintang utara, delapan puluh lima derajat nol menit nol detik bujur barat, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal tiga derajat dua belas menit tiga belas koma satu detik lintang selatan, seratus enam derajat nol menit lima belas koma satu detik bujur timur, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal
derajat, desimal derajat, dan meter
+03.20361+106.00417+350.517/
derajat, menit, dan meter
+0312+10600-169.2/
4
6 dari 9
derajat, menit, desimal menit, dan meter
+0312.22+10600.25-169.2/
derajat, menit, detik, dan meter
+031213+1060015+2.79/
derajat, menit, detik, dan meter
+020000-0850000+2.79/
derajat, menit, detik, desimal detik, dan meter
-031213.1+1060015.1+2.79/
Tabel 2. (lanjutan) No. 8 Satuan Lintang, Bujur dan Tinggi derajat, menit, detik, desimal detik, dan meter Format Penulisan +020000.1+0850000.1+2.79/ Cara Pembacaan dua derajat nol menit nol koma satu detik lintang utara, delapan puluh lima derajat nol menit nol koma satu detik bujur timur, dua koma tujuh puluh sembilan meter di atas permukaan referensi vertikal
7 dari 9
Lampiran A (informatif)
Daftar deviasi teknis

No 1 Judul Bagian Pasal dan Subpasal dalam ISO 6709 Standar penyajian data lintang, bujur dan tinggi untuk lokasi titik geografis Subpasal 2.3.2 Modifikasi dalam SNI Standar pertukaran data lintang, bujur, dan tinggi lokasi geografis Subpasal 2.3.2 Pasal 3 Sistem referensi koordinat Keterangan kata penyajian diganti dengan pertukaran, kata titik dihilangkan Penambahan catatan pada subpasal 2.3.2 Informasi mengenai sistem referensi koordinat ditambahkan pada SNI ini Point a) sampai n) diubah menjadi dua buah tabel
2 3
Isi Isi
Isi
Pasal 3, Examples, point a) sampai n)
Tabel 1 dan Tabel 2
8 dari 9
Bibliografi
ISO 6709 (E), Standard representation of latitude, longitude and altitude for geographic point locations, ISO, 1983.
9 dari 9
RSNI2
Standar Nasional Indonesia
Metadata
Pusat Sistem Jaringan dan Standardisasi Data Spasial Badan Koordinasi Survei dan Pemetaan Nasional (BAKOSURTANAL)
FGDC-STD-001-1998
Content Standard for Digital Geospatial Metadata

Metadata Ad Hoc Working Group Federal Geographic Data Committee
Federal Geographic Data Committee Department of Agriculture ! Department of Commerce ! Department of Defense ! Department of Energy Department of Housing and Urban Development ! Department of the Interior ! Department of State Department of Transportation ! Environmental Protection Agency Federal Emergency Management Agency ! Library of Congress National Aeronautics and Space Administration ! National Archives and Records Administration Tennessee Valley Authority
Federal Geographic Data Committee
Established by Office of Management and Budget Circular A-16, the Federal Geographic Data Committee (FGDC) promotes the coordinated development, use, sharing, and dissemination of geographic data. The FGDC is composed of representatives from the Departments of Agriculture, Commerce, Defense, Energy, Housing and Urban Development, the Interior, State, and Transportation; the Environmental Protection Agency; the Federal Emergency Management Agency; the Library of Congress; the National Aeronautics and Space Administration; the National Archives and Records Administration; and the Tennessee Valley Authority. Additional Federal agencies participate on FGDC subcommittees and working groups. The Department of the Interior chairs the committee. FGDC subcommittees work on issues related to data categories coordinated under the circular. Subcommittees establish and implement standards for data content, quality, and transfer; encourage the exchange of information and the transfer of data; and organize the collection of geographic data to reduce duplication of effort. Working groups are established for issues that transcend data categories. For more information about the committee, or to be added to the committee's newsletter mailing list, please contact: Federal Geographic Data Committee Secretariat c/o U.S. Geological Survey 590 National Center Reston, Virginia 20192 Telephone: (703) 648-5514 Facsimile: (703) 648-5755 Internet (electronic mail): gdc@usgs.gov Anonymous FTP: fgdc.er.usgs.gov WWW Home Page: http://www.fgdc.gov
The following is the recommended bibliographic citation for this publication: Federal Geographic Data Committee. FGDC-STD-001-1998. Content standard for digital geospatial metadata (revised June 1998). Federal Geographic Data Committee. Washington, D.C.
Federal Geographic Data Committee Department of Agriculture ! Department of Commerce ! Department of Defense ! Department of Energy Department of Housing and Urban Development ! Department of the Interior ! Department of State Department of Transportation ! Environmental Protection Agency Federal Emergency Management Agency ! Library of Congress National Aeronautics and Space Administration ! National Archives and Records Administration Tennessee Valley Authority
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata
FGDC-STD-001-1998
CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Organization of the Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Metadata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Identification Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Data Quality Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Spatial Data Organization Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Spatial Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Entity and Attribute Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Distribution Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Metadata Reference Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Citation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Time Period Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Appendix A Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Appendix B Alphabetical List of Compound Elements and Data Elements . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Appendix C References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Appendix D Guidelines for Creating Extended Elements in the Content Standard for Digital Geospatial Metadata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Appendix E Guidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata . . . 77
iii
FGDC-STD-001-1998
Introduction
1. Objectives. The objectives of the standard are to provide a common set of terminology and definitions for the documentation of digital geospatial data. The standard establishes the names of data elements and compound elements (groups of data elements) to be used for these purposes, the definitions of these compound elements and data elements, and information about the values that are to be provided for the data elements. The major uses of metadata are: C to maintain an organization's internal investment in geospatial data, C to provide information about an organization's data holdings to data catalogues, clearinghouses, and brokerages, and C to provide information needed to process and interpret data to be received through a transfer from an external source. The information included in the standard was selected based on four roles that metadata play: C availability -- data needed to determine the sets of data that exist for a geographic location. C fitness for use -- data needed to determine if a set of data meets a specific need. C access -- data needed to acquire an identified set of data. C transfer -- data needed to process and use a set of data. These roles form a continuum in which a user cascades through a pyramid of choices to determine what data are available, to evaluate the fitness of the data for use, to access the data, and to transfer and process the data. The exact order in which data elements are evaluated, and the relative importance of data elements, will not be the same for all users. 2. Scope. This standard is intended to support the collection and processing of geospatial metadata. It is intended to be useable by all levels of government and the private sector. The standard is not intended to reflect an implementation design. An implementation design requires adapting the structure and form of the standard to meet application requirements. The standard was developed from the perspective of defining the information required by a prospective user to determine the availability of a set of geospatial data; to determine the fitness and the set of geospatial data for an intended use; to determine the means of accessing the set of geospatial data; and to successfully transfer the set of geospatial data. As such, the standard establishes the names of data elements and compound elements to be used for these purposes, definitions of these data elements and compound elements, and information about the values that are to be provided for the data elements. The standard does not specify the means by which this information is organized in a computer system or in a data transfer, nor the means by which this information is transmitted, communicated, or presented to the user.1
The variety of means of organizing data in a computer, the differences among data providers to describe their data holdings because of varying institutional and technical capabilities, the rapid evolution of means to provide information through the Internet for different purposes, and the need to accommodate existing standards have guided the evolution of this decision. The FGDC is pursuing several implementation methods.
1
iv
FGDC-STD-001-1998
3. Applicability This standard is for the documentation of geospatial data. Executive Order 12906, "Coordinating Geographic Data Acquisition and Access: The National Spatial Data Infrastructure," was signed on April 11, 1994, by President William J. Clinton. Section 3, Development of a National Geospatial Data Clearinghouse, paragraph (b) states: "Standardized Documentation of Data. Beginning nine months from the date of this order, each agency shall document all new geospatial data it collects or produces, either directly or indirectly, using the standard under development by the FGDC, and make that standardized documentation electronically accessible to the Clearinghouse network. Within one year of the date of this order, agencies shall adopt a schedule, developed in consultation with the FGDC, for documenting, to the extent practicable, geospatial data previously collected or produced, either directly or indirectly, and making that data documentation electronically accessible to the Clearinghouse network." This standard is the data documentation standard referenced in the executive order. The FGDC invites and encourages organizations and persons from State, local, and tribal governments, the private sector, and non-profit organizations to use the standard to document their geospatial data. A major difficulty in the geospatial data community is the lack of information that helps prospective users to determine what data exist, the fitness of existing data for planned applications, and the conditions for accessing existing data, and to transfer data to a user's system. This standard, developed with aid of broad public participation, will help to ease these problems and to develop the National Spatial Data Infrastructure. 4. Related Standards The Spatial Data Transfer Standard (SDTS) was developed to allow the transfer of digital spatial data sets between spatial data software. The Content Standard for Digital Geospatial Metadata was developed to identify and define the metadata elements used to document digital geospatial data sets for many purposes. These include metadata to: 1) preserve the meaning and value of a data set; 2) contribute to a catalog or clearinghouse and; 3) aid in data transfer. Since the SDTS is a standard for data transfer, its primary metadata content is used to determine the fitness of the data set for the user's purpose. There is a close relationship between the Metadata Standard and the SDTS metadata elements contained in the Data Quality module, and in other locations inside of the SDTS transfer set. Since the Metadata Standard contains metadata used to search for digital spatial data sets through a clearinghouse (metadata for locating, describing access, use, and distribution), these elements may not be contained in the SDTS transfer set. The Content Standard for Digital Geospatial Metadata uses to the maximum extent possible, existing International or National Standards, as documented in Office of Management and Budget Circular A-119 Federal Participation in the Development and Use of Voluntary Consensus Standards and in Conformity assessment Activities. American National Standards referenced in the Content Standard for Digital Geospatial Metadata include the American National Standards Institute, 1975, Representations of universal time, local time differentials, and United States time zone reference for information interchange (ANSI X3.51-1975): New York, American National Standards Institute; American National Standards Institute, 1986, Representation for calendar date and ordinal date for information interchange (ANSI X3.30-1985): New York, American National Standards Institute; American National Standards Institute, 1986, Representations of local time of day for information interchange (ANSI X3.43-1986): New York, American National Standards Institute. The June 8, 1994 FGDC Metadata Standard was used as the base document for International Organization for Standardization (ISO) 15046 Part 15. The draft ISO Metadata Standard 15046 Part 15 has had a number of changes made to it. At this time this revision was prepared, the ISO Metadata Standard was still in Committee Draft form and subject to significant change before final approval, therefore, is not
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata identical to the current ISO draft but is thought to be consistent with it.
FGDC-STD-001-1998
5. Standards Development Process The Federal Geographic Data Committee (FGDC) initiated work on the first version of the standard in June, 1992, through a forum on geospatial metadata. At the forum, the participants agreed on the need for a standard on the information content of metadata about geospatial data. The committee accepted the offer of ASTM2 Section D18.01.05 to develop a draft information content standard. The draft was slightly revised, and offered for public review from October 1992 to April 1993. Extensive comments were received from the public. The FGDC Standards Working Group revised the draft. The revised draft was provided for further review and testing in July 1993. Refined drafts were offered for review and testing in January and March 1994. The first version was approved June 8, 1994. Since the FGDC Metadata Standard was adopted, it has been implemented by numerous Federal, state, and local agencies, companies, and groups. It has also been used by other nations as they develop their own national metadata standards. Proposed changes to the Metadata Standard have been suggested during the time since it was issued. Further, an implementors workshop was held specifically to discuss strengths, weaknesses, and proposed improvements. Drawing on this body of knowledge, the FGDC proposed to modify the current Metadata Standard. The June 1998 version is fully backward compatible with and supersedes the June 8, 1994 version. The June 1998 version provides for the definition of Profiles (Appendix E) and extensibility through User Defined Metadata Extensions (Appendix D). The June 1998 version also modifies some production rules to ease implementation. 6. Maintenance Authority. The current maintenance authority for the standard is the FGDC Secretariat. The Federal Geographic Data Committee is the approving authority for the standard. Questions concerning the standard are to be addressed to the FGDC Secretariat, in care of the U.S. Geological Survey, 590 National Center, Reston, Virginia 20192. Copies of this publication are available from the Federal Geographic Data Committee. Secretariat, in care of the U.S. Geological Survey, 590 National Center, Reston, Virginia 20192; telephone (703) 648-5514; facsimile (703) 648-5755; Internet (electronic mail) gdc@usgs.gov. The text also is available from anonymous File Transfer Protocol (anonymous ftp) server fgdc.er.usgs.gov and at the FGDC web site http://www.fgdc.gov/metadata.
formally the American Society for Testing and Materials vi
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Organization of the Standard Numbered Sections
FGDC-STD-001-1998
The standard is organized in a hierarchy of data elements and compound elements that define the information content for metadata to document a set of digital geospatial data. The starting point is "metadata" (section 0). The compound element "metadata" is composed of other compound elements representing different concepts about the data set. Each of these compound elements has a numbered section in the standard. In each numbered section, these compound elements are defined by other compound elements and data elements. The section "contact information" is a special section that specifies the data elements for contacting individuals and organizations. This section is used by other sections, and is defined once for convenience. Each section begins with the name and definition of the compound element that defines the section. The name and definition are followed by production rules (see below) that define this compound element in terms of data elements, either directly or by the use of intermediate compound elements. When intermediate compound elements are used, the production rules for these elements also are provided in this part of the section. Additional information about the organization of the Standard follows: C C The production rules are followed by a list of names and definitions of compound elements and data elements used in the section. Section and element numbers are provided for user navigation of the standard. They are neither authoritative nor intended for use in implementation and are subject to change in future revisions of the standard.
Compound Elements A compound element is a group of data elements and other compound elements. All compound elements are described by data elements, either directly or through intermediate compound elements. Compound elements represent higher-level concepts that cannot be represented by individual data elements. The form for the definition of compound elements is: Compound element name -- definition. Type: compound Short Name: The type of "compound" uniquely identifies the compound elements in the lists of terms and definitions. Short names consisting of eight alphabetic characters or less are included to assist in implementation of the standard. Data Elements A data element is a logically primitive item of data. The entry for a data element includes the name of the data element, the definition of the data element, a description of the values that can be assigned to the data element, and a short name for the data element. The form for the definition of the data elements is:
vii
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Data element name -- definition. Type: Domain: Short Name:
FGDC-STD-001-1998
The information about the values for the data elements include a description of the type of the value, and a description of the domain of the valid values. The type of the data element describes the kind of value to be provided. The choices are "integer" for integer numbers, "real" for real numbers, "text" for ASCII characters, "date" for day of the year, and "time" for time of the day.
The domain describes valid values that can be assigned to the data element. The domain may specify a list of valid values, references to lists of valid values, or restrictions on the range of values that can be assigned to a data element. The domain also may note that the domain is free from restrictions, and any values that can be represented by the "type" of the data element can be assigned. These unrestricted domains are represented by the use of the word "free" followed by the type of the data element (that is, free text, free date, free real, free time, free integer). Some domains can be partly, but not completely, specified. For example, there are several widely used data transfer formats, but there may be many more that are less well known. To allow a producer to describe its data in these circumstances, the convention of providing a list of values followed by the designation of a "free" domain was used. In these cases, assignments of values shall be made from the provided domain when possible. When not possible, providers may create and assign their own value. A created value shall not redefine a value provided by the standard. Short names consisting of eight alphabetic characters or less are included to assist in user implementation of the standard. Another issue is the representation of null values (representing such concepts as "unknown") in the domain. While this is relatively simple for textual entries (one would enter the text "Unknown"), it is not as simple for the integer, real, date, and time types. (For example, which integer value means "unknown"?). Because conventions for providing this information vary among implementations, the standard specifies what concepts shall be represented, but does not mandate a means for representing them. In addition to the values to be represented, the form of representation also is important, especially to applications that will manipulate the data elements. The following conventions for forms of values for data elements shall be used:
Calendar Dates (Years, Months, and Days) C A.D. Era to December 31, 9999 A.D. -- Values for day and month of year, and for years, shall follow the calendar date convention (general forms of YYYY for years; YYYYMM for month of a year (with month being expressed as an integer), and YYYYMMDD for a day of the year) specified in American National Standards Institute, 1986, Representation for calendar date and ordinal date for information interchange (ANSI X3.30-1985): New York, American National Standards Institute (adopted as Federal Information Processing Standard 4-1). B.C. Era to 9999 B.C. -- Values for day and month of year, and for years, shall follow the calendar
viii
FGDC-STD-001-1998
date convention, preceded by the lower case letters "bc" (general forms of bcYYYY for years; bcYYYYMM for month of a year (with month being expressed as an integer), and bcYYYYMMDD for a day of the year). C B.C. Era before 9999 B.C. -- Values for the year shall consist of as many numeric characters as needed to represent the number of the year B.C., preceded by lower case letters "cc" (general form of ccYYYYYYY...). A.D. Era after 9999 A.D. -- Values for the year shall consist of as many numeric characters as needed to represent number of the year A.D., preceded by the lower case letters "cd" (general form of cdYYYYYYY...).
Time of Day (Hours, Minutes, and Seconds) C Because some geospatial data and related applications are sensitive to time of day information, three conventions are permitted. Only one convention shall be used for metadata for a data set. The conventions are: Local Time. For producers who wish to record time in local time, values shall follow the 24hour timekeeping system for local time of day in the hours, minutes, seconds, and decimal fractions of a second (to the precision desired) without separators convention (general form of HHMMSSSS) specified in American National Standards Institute, 1986, Representations of local time of day for information interchange (ANSI X3.43-1986): New York, American National Standards Institute. Local Time with Time Differential Factor. For producers who wish to record time in local time and the relationship to Universal Time (Greenwich Mean Time), values shall follow the 24-hour timekeeping system for local time of day in hours, minutes, seconds, and decimal fractions of a second (to the resolution desired) without separators convention. This value shall be followed, without separators, by the time differential factor. The time differential factor expresses the difference in hours and minutes between local time and Universal Time. It is represented by a four-digit number preceded by a plus sign (+) or minus sign (-), indicating hours and minutes local time is ahead of or behind Universal Time, respectively. The general form is HHMMSSSSshhmm, where HHMMSSSS is the local time using 24hour timekeeping (expressed to the precision desired), 's' is the plus or minus sign for the time differential factor, and hhmm is the time differential factor. (This option allows producers to record local time and time zone information. For example, Eastern Standard Time has a time differential factor of -0500, Central Standard Time has a time differential factor of -0600, Eastern Daylight Time has a time differential factor of -0400, and Central Daylight Time has a time differential factor of -0500.) This option is specified in American National Standards Institute, 1975, Representations of universal time, local time differentials, and United States time zone reference for information interchange (ANSI X3.51-1975): New York, American National Standards Institute. Universal Time (Greenwich Mean Time). For producers who wish to record time in Universal Time (Greenwich Mean Time), values shall follow the 24-hour timekeeping system for Universal Time of day in hours, minutes, seconds, and decimal fractions of a second (expressed to the precision desired) without separators convention, with the upper case letter "Z" directly following the low-order (or extreme right hand) time element of the 24-hour clock time expression. The general form is HHMMSSSSZ, where HHMMSSSS is
ix
FGDC-STD-001-1998
Universal Time using 24-hour timekeeping, and Z is the letter "Z". This option is specified in American National Standards Institute, 1975, Representations of universal time, local time differentials, and United States time zone reference for information interchange (ANSI X3.51-1975): New York, American National Standards Institute. Latitude and Longitude C Values for latitude and longitude shall be expressed as decimal fractions of degrees. Whole degrees of latitude shall be represented by a two-digit decimal number ranging from 0 through 90. Whole degrees of longitude shall be represented by a three-digit decimal number ranging from 0 through 180. When a decimal fraction of a degree is specified, it shall be separated from the whole number of degrees by a decimal point. Decimal fractions of a degree may be expressed to the precision desired. Latitudes north of the equator shall be specified by a plus sign (+), or by the absence of a minus sign (-), preceding the two digits designating degrees. Latitudes south of the Equator shall be designated by a minus sign (-) preceding the two digits designating degrees. A point on the Equator shall be assigned to the Northern Hemisphere. Longitudes east of the prime meridian shall be specified by a plus sign (+), or by the absence of a minus sign (-), preceding the three digits designating degrees of longitude. Longitudes west of the meridian shall be designated by minus sign (-) preceding the three digits designating degrees. A point on the prime meridian shall be assigned to the Eastern Hemisphere. A point on the 180th meridian shall be assigned to the Western Hemisphere. One exception to this last convention is permitted. For the special condition of describing a band of latitude around the earth, the East Bounding Coordinate data element shall be assigned the value +180 (180) degrees. Any spatial address with a latitude of +90 (90) or -90 degrees will specify the position at the North or South Pole, respectively. The component for longitude may have any legal value.
With the exception of the special condition described above, this form is specified in American National Standards Institute, 1986, Representations of Geographic Point Locations for Information Interchange (ANSI X3.61-1986): New York, American National Standards Institute. Network Addresses and File Names Values for file names, network addresses for computer systems, and related services should follow the Uniform Resource Locator convention of the Internet when possible. See http://www.ncsa.uiuc.edu/demoweb/url-primer.html for additional details about the Uniform Resource Locator. Optionality The standard categorizes elements as being mandatory, mandatory-if-applicable, or optional as follows: C C C Mandatory elements must be provided. Mandatory-if-applicable elements must be provided if the data set exhibits the defined characteristic. Optional elements are provided at the discretion of the metadata producer.
FGDC-STD-001-1998
The optionality of a section or compound element always takes precedence over the elements that it contains. Once a section or compound element is recognized by the data set producer as applicable, then the optionality of its subordinate elements is to be interpreted. See Production Rules section for additional interpretive guidance. Mandatory sections in the standard have some elements that are always required for all types of geospatial data sets. For comparison with other metadata standards, these elements are referred to as core elements. Production Rules A production rule specifies the relationship between a compound element, and data elements and other (lower-level) compound elements. Each production rule has a left side (identifier) and a right side (expression) connected by the symbol "=", meaning that the term on the left side is replaced by or produces the term on the right side. Terms on the right side are either other compound elements or individual data elements. By making substitutions using matching terms in the production rules, one can explain higher-level concepts using data elements. The symbols used in the production rules have the following meaning: Symbol Meaning = is replaced by, produces, consists of + and [|] selection - select one term from the list of enclosed terms (exclusive or). Terms are separated by "|" m{}n iteration - the term(s) enclosed is(are) repeated from "m" to "n" times () optional - the term(s) enclosed is(are) optional
Examples: a=b+c a = [b | c a = 4{b}6 a = b + (c) "a consists of b and c" "a consists of one of b or c" "a consists of four to six occurrences of b" "a consists of b and optionally c"
Interpreting the production rules: The terms bounded by parentheses, "(" and ")", are optional and are provided at the discretion of the data producer. If a producer chooses to provide information enclosed by parentheses, the producer shall follow the production rules for the enclosed information. For example, if the producer decides to provide the optional information described in the term: (a + b + c) the producer shall provide a and b and c. Only for terms bounded by parentheses does the producer have the discretion of deciding
xi
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata whether or not to provide the information.
FGDC-STD-001-1998
The variation among the ways in which geospatial data are produced and distributed, the fact that all geospatial data does not have the same characteristics, and the issue that all details of data sets that are in work or are planned may not be decided, caused the need to express the concept of "mandatory if applicable." This concept means that if the data set exhibits (or, for data sets that are in work or planned, it is known that the data set will exhibit) a defined characteristic, then the producer shall provide the information needed to describe that characteristic. This concept is described by the production rule: 0{ term }1
Extensibility Extended elements may be defined by a data set producer or a user community. Extended elements are elements outside the standard, but needed by the data set producer. If extended elements are created, they must follow the guidelines in Appendix D, Guidelines for creating extended elements to the Content Standard for Digital Geospatial Metadata.
xii
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Metadata 0
FGDC-STD-001-1998
Metadata -- data about the content, quality, condition, and other characteristics of data. Type: compound Short Name: metadata Metadata = Identification_Information + 0{Data_Quality_Information}1 + 0{Spatial_Data_Organization_Information}1 + 0{Spatial_Reference_Information}1 + 0{Entity_and_Attribute_Information}1 + 0{Distribution_Information}n + Metadata_Reference_Information
(Sections 1 through 7 define the terms on the right side of the production rule.)
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Identification Information 1 Identification Information -- basic information about the data set. Type: compound Short Name: idinfo Identification_Information = Citation + Description + Time_Period_of_Content + Status + Spatial_Domain + Keywords + Access_Constraints + Use_Constraints + (Point_of_Contact) + (1{Browse_Graphic}n) + (Data_Set_Credit) + (Security_Information) + (Native_Data_Set_Environment) + (1{Cross_Reference}n) Citation =
FGDC-STD-001-1998
Citation_Information (see section 8 for production rules) Description = Abstract + Purpose + (Supplemental_Information) Time_Period_of_Content = Time_Period_Information (see section 9 for production rules) + Currentness_Reference Status = Progress + Maintenance_and_Update_Frequency Spatial_Domain = Bounding_Coordinates + (1{Data_Set_G-Polygon}n) Bounding_Coordinates = West_Bounding_Coordinate + East_Bounding_Coordinate + North_Bounding_Coordinate + South_Bounding_Coordinate Data_Set_G-Polygon = Data_Set_G-Polygon_Outer_G-Ring +
FGDC-STD-001-1998
0{Data_Set_G-Polygon_Exclusion_G-Ring}n Data_Set_G-Polygon_Outer_G-Ring = [4{G-Ring_Point}n | G-Ring] Data_Set_G-Polygon_Exclusion_G-Ring = [4{G-Ring_Point}n | G-Ring] G-Ring_Point = G-Ring_Latitude + G-Ring_Longitude Keywords = 1{Theme}n + 0{Place}n + 0{Stratum}n + 0{Temporal}n Theme = Theme_Keyword_Thesaurus + 1{Theme_Keyword}n Place = Place_Keyword_Thesaurus + 1{Place_Keyword}n Stratum = Stratum_Keyword_Thesaurus + 1{Stratum_Keyword}n Temporal = Temporal_Keyword_Thesaurus + 1{Temporal_Keyword}n Point_of_Contact = Contact_Information (see section 10 for production rules) Browse_Graphic = Browse_Graphic_File_Name + Browse_Graphic_File_Description + Browse_Graphic_File_Type Security_Information = Security_Classification_System + Security_Classification + Security_Handling_Description Cross_Reference = Citation_Information (see section 8 for production rules)
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 1.1 Citation -- information to be used to reference the data set. Type: compound Short Name: citation
FGDC-STD-001-1998
1.2
Description -- a characterization of the data set, including its intended use and limitations. Type: compound Short Name: descript Abstract -- a brief narrative summary of the data set. Type: text Domain: free text Short Name: abstract Purpose -- a summary of the intentions with which the data set was developed. Type: text Domain: free text Short Name: purpose Supplemental Information -- other descriptive information about the data set. Type: text Domain: free text Short Name: supplinf Time Period of Content -- time period(s) for which the data set corresponds to the currentness reference. Type: compound Short Name: timeperd Currentness Reference -- the basis on which the time period of content information is determined. Type: text Domain: "ground condition" "publication date" free text Short Name: current Status -- the state of and maintenance information for the data set. Type: compound Short Name: status Progress -- the state of the data set. Type: text Domain: "Complete" "In work" "Planned" Short Name: progress Maintenance and Update Frequency -- the frequency with which changes and additions are made to the data set after the initial data set is completed. Type: text Domain: "Continually" "Daily" "Weekly" "Monthly" "Annually" "Unknown" "As needed" "Irregular" "None planned" free text Short Name: update
1.2.1
1.2.2
1.2.3
1.3
1.3.1
1.4
1.4.1
1.4.2
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 1.5 Spatial Domain - the geographic areal domain of the data set. Type: compound Short Name: spdom
FGDC-STD-001-1998
1.5.1
Bounding Coordinates - the limits of coverage of a data set expressed by latitude and longitude values in the order western-most, eastern-most, northern-most, and southern-most. For data sets that include a complete band of latitude around the earth, the West Bounding Coordinate shall be assigned the value -180.0, and the East Bounding Coordinate shall be assigned the value 180.0 Type: compound Short Name: bounding West Bounding Coordinate -- western-most coordinate of the limit of coverage expressed in longitude. Type: real Domain: -180.0 <= West Bounding Coordinate < 180.0 Short Name: westbc East Bounding Coordinate -- eastern-most coordinate of the limit of coverage expressed in longitude. Type: real Domain: -180.0 <= East Bounding Coordinate <= 180.0 Short Name: eastbc North Bounding Coordinate -- northern-most coordinate of the limit of coverage expressed in latitude. Type: real Domain: -90.0 <= North Bounding Coordinate <= 90.0; North Bounding Coordinate >= South Bounding Coordinate Short Name: northbc South Bounding Coordinate -- southern-most coordinate of the limit of coverage expressed in latitude. Type: real Domain: -90.0 <= South Bounding Coordinate <= 90.0; South Bounding Coordinate <= North Bounding Coordinate Short Name: southbc Data Set G-Polygon -- coordinates defining the outline of an area covered by a data set. Type: compound Short Name: dsgpoly Data Set G-Polygon Outer G-Ring -- the closed nonintersecting boundary of an interior area. Type: compound Short Name: dsgpolyo G-Ring Point -- a single geographic location. Type: compound Short Name: grngpoin
1.5.1.1
1.5.1.2
1.5.1.3
1.5.1.4
1.5.2
1.5.2.1
1.5.2.1.1
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 1.5.2.1.1.1
FGDC-STD-001-1998
G-Ring Latitude -- the latitude of a point of the g-ring. Type: real Domain: -90.0 <= G-Ring Latitude <= 90.0 Short Name: gringlat G-Ring Longitude -- the longitude of a point of the g-ring. Type: real Domain: -180.0 <= G-Ring Longitude < 180.0 Short Name: gringlon G-Ring -- a set of ordered pairs of floating-point numbers, separated by commas, in which the first number in each pair is the longitude of a point and the second is the latitude of the point. Longitude and latitude are specified in decimal degrees with north latitudes positive and south negative, east longitude positive and west negative Type: text Domain: -90<= Latitude_elements <= 90, -180 <= Longitude_Elements = 180 Short Name: gring Data Set G-Polygon Exclusion G-Ring -- the closed nonintersecting boundary of a void area (or hole in an interior area). Type: compound Short Name: dsgpolyx
1.5.2.1.1.2
1.5.2.1.2
1.5.2.2
1.6
Keywords -- words or phrases summarizing an aspect of the data set. Type: compound Short Name: keywords Theme -- subjects covered by the data set (for a list of some commonly-used thesauri, see Part IV: Subject/index term sources in Network Development and MARC Standards Office, 1988, USMARC code list for relators, sources, and description conventions: Washington, Library of Congress). Type: compound Short Name: theme Theme Keyword Thesaurus -- reference to a formally registered thesaurus or a similar authoritative source of theme keywords. Type: text Domain: "None" free text Short Name: themekt Theme Keyword -- common-use word or phrase used to describe the subject of the data set. Type: text Domain: free text Short Name: themekey Place -- geographic locations characterized by the data set. Type: compound
1.6.1
1.6.1.1
1.6.1.2
1.6.2
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Short Name: place 1.6.2.1
FGDC-STD-001-1998
Place Keyword Thesaurus -- reference to a formally registered thesaurus or a similar authoritative source of place keywords. Type: text Domain: "None" "Geographic Names Information System" free text Short Name: placekt Place Keyword -- the geographic name of a location covered by a data set. Type: text Domain: free text Short Name: placekey Stratum -- layered, vertical locations characterized by the data set. Type: compound Short Name: stratum Stratum Keyword Thesaurus -- reference to a formally registered thesaurus or a similar authoritative source of stratum keywords. Type: text Domain: "None" free text Short Name: stratkt Stratum Keyword -- the name of a vertical location used to describe the locations covered by a data set. Type: text Domain: free text Short Name: stratkey Temporal -- time period(s) characterized by the data set. Type: compound Short Name: temporal Temporal Keyword Thesaurus -- reference to a formally registered thesaurus or a similar authoritative source of temporal keywords. Type: text Domain: "None" free text Short Name: tempkt Temporal Keyword -- the name of a time period covered by a data set. Type: text Domain: free text Short Name: tempkey
1.6.2.2
1.6.3
1.6.3.1
1.6.3.2
1.6.4
1.6.4.1
1.6.4.2
1.7
Access Constraints -- restrictions and legal prerequisites for accessing the data set. These include any access constraints applied to assure the protection of privacy or intellectual property, and any special restrictions or limitations on obtaining the data set. Type: text Domain: "None" free text Short Name: accconst
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 1.8
FGDC-STD-001-1998
Use Constraints -- restrictions and legal prerequisites for using the data set after access is granted. These include any use constraints applied to assure the protection of privacy or intellectual property, and any special restrictions or limitations on using the data set. Type: text Domain: "None" free text Short Name: useconst Point of Contact -- contact information for an individual or organization that is knowledgeable about the data set. Type: compound Short Name: ptcontac
1.9
1.10 Browse Graphic -- a graphic that provides an illustration of the data set. The graphic should include a legend for interpreting the graphic. Type: compound Short Name: browse 1.10.1 Browse Graphic File Name -- name of a related graphic file that provides an illustration of the data set. Type: text Domain: free text Short Name: browsen Browse Graphic File Description -- a text description of the illustration. Type: text Domain: free text Short Name: browsed Browse Graphic File Type -- graphic file type of a related graphic file. Type: text Domain: domain values in the table below; free text Short Name: browset Domain Value "CGM" "EPS" EMF "GIF" "JPEG" "PBM" "PS" "TIFF" WMF "XWD"
1.10.2
1.10.3
Definition Computer Graphics Metafile Encapsulated Postscript format Enhanced Metafile Graphic Interchange Format Joint Photographic Experts Group format Portable Bit Map format Postscript format Tagged Image File Format Windows metafile X-Windows Dump
1.11 Data Set Credit -- recognition of those who contributed to the data set. Type: text Domain: free text Short Name: datacred
FGDC-STD-001-1998
1.12 Security Information -- handling restrictions imposed on the data set because of national security, privacy, or other concerns. Type: compound Short Name: secinfo 1.12.1 Security Classification System -- name of the classification system. Type: text Domain: free text Short Name: secsys Security Classification -- name of the handling restrictions on the data set. Type: text Domain: "Top secret" "Secret" "Confidential" "Restricted" "Unclassified" "Sensitive" free text Short Name: secclass Security Handling Description -- additional information about the restrictions on handling the data set. Type: text Domain: free text Short Name: sechandl
1.12.2
1.12.3
1.13 Native Data Set Environment -- a description of the data set in the producer's processing environment, including items such as the name of the software (including version), the computer operating system, file name (including host-, path-, and filenames), and the data set size. Type: text Domain: free text Short Name: native 1.14 Cross Reference -- information about other, related data sets that are likely to be of interest. Type: compound Short Name: crossref
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Data Quality Information 2
FGDC-STD-001-1998
Data Quality Information -- a general assessment of the quality of the data set. (Recommendations on information to be reported and tests to be performed are found in "Spatial Data Quality," which is chapter 3 of part 1 in Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information Processing Standard 173): Washington, Department of Commerce, National Institute of Standards and Technology.) Type: compound Short Name: dataqual Data_Quality_Information = 0{Attribute_Accuracy}1 + Logical_Consistency_Report + Completeness_Report + 0{Positional_Accuracy}1 + Lineage + (Cloud_Cover) Attribute_Accuracy = Attribute_Accuracy_Report + (1{Quantitative_Attribute_Accuracy_Assessment}n) Quantitative_Attribute_Accuracy_Assessment = Attribute_Accuracy_Value + Attribute_Accuracy_Explanation Positional_Accuracy = 0{Horizontal_Positional_Accuracy}1 + 0{Vertical_Positional_Accuracy}1 Horizontal_Positional_Accuracy = Horizontal_Positional_Accuracy_Report + (1{Quantitative_Horizontal_Positional_Accuracy_Assessment}n) Quantitative_Horizontal_Positional_Accuracy_Assessment = Horizontal_Positional_Accuracy_Value + Horizontal_Positional_Accuracy_Explanation Vertical_Positional_Accuracy = Vertical_Positional_Accuracy_Report + (1{Quantitative_Vertical_Positional_Accuracy_Assessment}n) Quantitative_Vertical_Positional_Accuracy_Assessment = Vertical_Positional_Accuracy_Value + Vertical_Positional_Accuracy_Explanation Lineage = 0{Source_Information}n + 1{Process_Step}n Source_Information =
10
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Source_Citation + 0{Source_Scale_Denominator}1 + Type_of_Source_Media + Source_Time_Period_of_Content + Source_Citation_Abbreviation + Source_Contribution Source_Citation =
FGDC-STD-001-1998
Citation_Information (see section 8 for production rules) Source_Time_Period_of_Content = Time_Period_Information (see section 9 for production rules) + Source_Currentness_Reference Process_Step = Process_Description + 0{Source_Used_Citation_Abbreviation}n + Process_Date + (Process_Time) + 0{Source_Produced_Citation_Abbreviation}n + (Process_Contact) Process_Contact = Contact_Information (see section 10 for production rules) 2.1 Attribute Accuracy -- an assessment of the accuracy of the identification of entities and assignment of attribute values in the data set. Type: compound Short Name: attracc Attribute Accuracy Report -- an explanation of the accuracy of the identification of the entities and assignments of values in the data set and a description of the tests used. Type: text Domain: free text Short Name: attraccr Quantitative Attribute Accuracy Assessment -- a value assigned to summarize the accuracy of the identification of the entities and assignments of values in the data set and the identification of the test that yielded the value. Type: compound Short Name: qattracc Attribute Accuracy Value -- an estimate of the accuracy of the identification of the entities and assignments of attribute values in the data set. Type: text Domain: "Unknown" free text Short Name: attraccv Attribute Accuracy Explanation -- the identification of the test that yielded the Attribute Accuracy Value.
2.1.1
2.1.2
2.1.2.1
2.1.2.2
11
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Type: text Domain: free text Short Name: attracce 2.2
FGDC-STD-001-1998
Logical Consistency Report -- an explanation of the fidelity of relationships in the data set and tests used. Type: text Domain: free text Short Name: logic Completeness Report -- information about omissions, selection criteria, generalization, definitions used, and other rules used to derive the data set. Type: text Domain: free text Short Name: complete Positional Accuracy -- an assessment of the accuracy of the positions of spatial objects. Type: compound Short Name: posacc Horizontal Positional Accuracy -- an estimate of accuracy of the horizontal positions of the spatial objects. Type: compound Short Name: horizpa Horizontal Positional Accuracy Report -- an explanation of the accuracy of the horizontal coordinate measurements and a description of the tests used. Type: text Domain: free text Short Name: horizpar Quantitative Horizontal Positional Accuracy Assessment -- numeric value assigned to summarize the accuracy of the horizontal coordinate measurements and the identification of the test that yielded the value. Type: compound Short Name: qhorizpa Horizontal Positional Accuracy Value -- an estimate of the accuracy of the horizontal coordinate measurements in the data set expressed in (ground) meters. Type: real Domain: free real Short Name: horizpav Horizontal Positional Accuracy Explanation -- the identification of the test that yielded the Horizontal Positional Accuracy Value. Type: text Domain: free text Short Name: horizpae
2.3
2.4
2.4.1
2.4.1.1
2.4.1.2
2.4.1.2.1
2.4.1.2.2
12
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 2.4.2
FGDC-STD-001-1998
Vertical Positional Accuracy -- an estimate of accuracy of the vertical positions in the data set. Type: compound Short Name: vertacc Vertical Positional Accuracy Report -- an explanation of the accuracy of the vertical coordinate measurements and a description of the tests used. Type: text Domain: free text Short Name: vertaccr Quantitative Vertical Positional Accuracy Assessment -- numeric value assigned to summarize the accuracy of vertical coordinate measurements and the identification of the test that yielded the value. Type: compound Short Name: qvertpa Vertical Positional Accuracy Value -- an estimate of the accuracy of the vertical coordinate measurements in the data set expressed in (ground) meters. Type: real Domain: free real Short Name: vertaccv Vertical Positional Accuracy Explanation -- the identification of the test that yielded the Vertical Positional Accuracy Value. Type: text Domain: free text Short Name: vertacce
2.4.2.1
2.4.2.2
2.4.2.2.1
2.4.2.2.2
2.5
Lineage -- information about the events, parameters, and source data which constructed the data set, and information about the responsible parties. Type: compound Short Name: lineage Source Information -- list of sources and a short discussion of the information contributed by each. Type: compound Short Name: srcinfo Source Citation -- reference for a source data set. Type: compound Short Name: srccite Source Scale Denominator -- the denominator of the representative fraction on a map (for example, on a 1:24,000-scale map, the Source Scale Denominator is 24000). Type: integer Domain: Source Scale Denominator > 1 Short Name: srcscale Type of Source Media -- the medium of the source data set.
2.5.1
2.5.1.1
2.5.1.2
2.5.1.3
13
FGDC-STD-001-1998
Type: text Domain: "paper" "stable-base material" "microfiche" "microfilm" "audiocassette" "chart" "filmstrip" "transparency" "videocassette" "videodisc" "videotape" "physical model" "computer program" "disc" "cartridge tape" "magnetic tape" "online" "CD-ROM" "electronic bulletin board" "electronic mail system" free text Short Name: typesrc 2.5.1.4 Source Time Period of Content -- time period(s) for which the source data set corresponds to the ground. Type: compound Short Name: srctime Source Currentness Reference -- the basis on which the source time period of content information of the source data set is determined. Type: text Domain: "ground condition" "publication date" free text Short Name: srccurr Source Citation Abbreviation -- short-form alias for the source citation. Type: text Domain: free text Short Name: srccitea Source Contribution -- brief statement identifying the information contributed by the source to the data set. Type: text Domain: free text Short Name: srccontr Process Step -- information about a single event. Type: compound Short Name: procstep Process Description -- an explanation of the event and related parameters or tolerances. Type: text Domain: free text Short Name: procdesc Source Used Citation Abbreviation -- the Source Citation Abbreviation of a data set used in the processing step. Type: text Domain: Source Citation Abbreviations from the Source Information entries for the data set. Short Name: srcused Process Date -- the date when the event was completed. Type: date Domain: "Unknown" "Not complete" free date
2.5.1.4.1
2.5.1.5
2.5.1.6
2.5.2
2.5.2.1
2.5.2.2
2.5.2.3
14
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Short Name: procdate 2.5.2.4 Process Time -- the time when the event was completed. Type: time Domain: free time Short Name: proctime
FGDC-STD-001-1998
2.5.2.5
Source Produced Citation Abbreviation -- the Source Citation Abbreviation of an intermediate data set that (1) is significant in the opinion of the data producer, (2) is generated in the processing step, and (3) is used in later processing steps. Type: text Domain: Source Citation Abbreviations from the Source Information entries for the data set. Short Name: srcprod Process Contact -- the party responsible for the processing step information. Type: compound Short Name: proccont
2.5.2.6
2.6
Cloud Cover -- area of a data set obstructed by clouds, expressed as a percentage of the spatial extent. Type: integer Domain: 0 <= Cloud Cover <= 100 "Unknown" Short Name: cloud
15
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Spatial Data Organization Information 3
FGDC-STD-001-1998
Spatial Data Organization Information -- the mechanism used to represent spatial information in the data set. Type: compound Short Name: spdoinfo Spatial_Data_Organization_Information = 0{Indirect_Spatial_Reference}1 + 0{Direct_Spatial_Reference_Method + ( [Point_and_Vector_Object_Information | Raster_Object_Information] )}1 Point_and_Vector_Object_Information = [1{SDTS_Terms_Description}n | VPF_Terms_Description] SDTS_Terms_Description = SDTS_Point_and_Vector_Object_Type + (Point_and_Vector_Object_Count) VPF_Terms_Description = VPF_Topology_Level + 1{VPF_Point_and_Vector_Object_Information}n VPF_Point_and_Vector_Object_Information = VPF_Point_and_Vector_Object_Type + (Point_and_Vector_Object_Count) Raster_Object_Information = Raster_Object_Type + (Row_Count + Column_Count + 0{Vertical_Count}1 )
3.1
Indirect Spatial Reference -- name of types of geographic features, addressing schemes, or other means through which locations are referenced in the data set. Type: text Domain: free text Short Name: indspref Direct Spatial Reference Method -- the system of objects used to represent space in the data set. Type: text Domain: "Point" "Vector" "Raster" Short Name: direct Point and Vector Object Information -- the types and numbers of vector or nongridded point spatial objects in the data set. Type: compound Short Name: ptvctinf
3.2
3.3
16
FGDC-STD-001-1998
SDTS Terms Description -- point and vector object information using the terminology and concepts from "Spatial Data Concepts," which is Chapter 2 of Part 1 in Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information Processing Standard 173): Washington, Department of Commerce, National Institute of Standards and Technology. (Note that this reference to the SDTS is used ONLY to provide a set of terminology for the point and vector objects.) Type: compound Short Name: sdtsterm SDTS Point and Vector Object Type -- name of point and vector spatial objects used to locate zero-, one-, and two-dimensional spatial locations in the data set. Type: text Domain: (The domain is from "Spatial Data Concepts," which is Chapter 2 of Part 1 in Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information Processing Standard 173): Washington, Department of Commerce, National Institute of Standards and Technology): "Point" "Entity point" "Label point" "Area point" "Node, planar graph" "Node, network" "String" "Link" "Complete chain" "Area chain" "Network chain, planar graph" "Network chain, nonplanar graph" "Circular arc, three point center" "Elliptical arc" "Uniform B-spline" "Piecewise Bezier" "Ring with mixed composition" "Ring composed of strings" "Ring composed of chains" "Ring composed of arcs" "G-polygon" "GT-polygon composed of rings" "GT-polygon composed of chains" "Universe polygon composed of rings" "Universe polygon composed of chains" "Void polygon composed of rings" "Void polygon composed of chains" Short Name: sdtstype Point and Vector Object Count -- the total number of the point or vector object type occurring in the data set. Type: integer Domain: Point and Vector Object Count > 0 Short Name: ptvctcnt VPF Terms Description -- point and vector object information using the terminology and concepts from Department of Defense, 1992, Vector Product Format (MIL-STD-600006): Philadelphia, Department of Defense, Defense Printing Service Detachment Office. (Note that this reference to the VPF is used ONLY to provide a set of terminology for the point and vector objects.) Type: compound Short Name: vpfterm VPF Topology Level -- the completeness of the topology carried by the data set. The levels of completeness are defined in Department of Defense, 1992, Vector Product Format (MIL-STD-600006): Philadelphia, Department of Defense, Defense Printing Service Detachment Office. Type: integer Domain: 0 <= VPF Topology Level <= 3 Short Name: vpflevel
3.3.1.1
3.3.1.2
3.3.2
3.3.2.1
17
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 3.3.2.2
FGDC-STD-001-1998
VPF Point and Vector Object Information -- information about VPF point and vector objects Type: compound Short Name: vpfinfo VPF Point and Vector Object Type -- name of point and vector spatial objects used to locate zero-, one-, and two-dimensional spatial locations in the data set. Type: text Domain: (The domain is from Department of Defense, 1992, Vector Product Format (MIL-STD-600006): Philadelphia, Department of Defense, Defense Printing Service Detachment Office): "Node" "Edge" "Face" "Text" Short Name: vpftype
3.3.2.2.1
3.4
Raster Object Information -- the types and numbers of raster spatial objects in the data set. Type: compound Short Name: rastinfo Raster Object Type -- raster spatial objects used to locate zero-, two-, or three-dimensional locations in the data set. Type: text Domain: (With the exception of "voxel", the domain is from "Spatial Data Concepts," which is chapter 2 of part 1 in Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information Processing Standard 173): Washington, Department of Commerce, National Institute of Standards and Technology): "Point" "Pixel" "Grid Cell" "Voxel" Short Name: rasttype Row Count -- the maximum number of raster objects along the ordinate (y) axis. For use with rectangular raster objects. Type: Integer Domain: Row Count > 0 Short Name: rowcount Column Count -- the maximum number of raster objects along the abscissa (x) axis. For use with rectangular raster objects. Type: Integer Domain: Column Count > 0 Short Name: colcount Vertical Count -- the maximum number of raster objects along the vertical (z) axis. For use with rectangular volumetric raster objects (voxels). Type: Integer Domain: Depth Count > 0 Short Name: vrtcount
3.4.1
3.4.2
3.4.3
3.4.4
18
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Spatial Reference Information 4
FGDC-STD-001-1998
Spatial Reference Information -- the description of the reference frame for, and the means to encode, coordinates in the data set. Type: compound Short Name: spref Spatial_Reference_Information = 0{Horizontal_Coordinate_System_Definition}1 + 0{Vertical_Coordinate_System_Definition}1 Horizontal_Coordinate_System_Definition = [Geographic | 1{Planar}n | Local] + 0{Geodetic_Model}1 Geographic = Latitude_Resolution + Longitude_Resolution + Geographic_Coordinate_Units Planar = [Map_Projection | Grid_Coordinate_System | Local_Planar] + Planar_Coordinate_Information Map_Projection = Map_Projection_Name + [Albers_Conical_Equal_Area | Azimuthal_Equidistant | Equidistant_Conic | Equirectangular | General_Vertical_Near-sided_Perspective | Gnomonic | Lambert_Azimuthal_Equal_Area | Lambert_Conformal_Conic | Mercator | Modified_Stereographic_for_Alaska | Miller_Cylindrical | Oblique_Mercator | Orthographic | Polar_Stereographic | Polyconic | Robinson | Sinusoidal | Space_Oblique_Mercator_(Landsat) | Stereographic | Transverse Mercator |
19
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata van_der_Grinten | Map_Projection_Parameters] Albers_Conical_Equal_Area = 1{Standard_Parallel}2 + Longitude_of_Central_Meridian + Latitude_of_Projection_Origin + False_Easting + False_Northing Azimuthal_Equidistant = Longitude_of_Central_Meridian + Latitude_of_Projection_Origin + False_Easting + False_Northing Equidistant_Conic = 1{Standard_Parallel}2 + Longitude_of_Central_Meridian + Latitude_of_Projection_Origin + False_Easting + False_Northing Equirectangular = Standard_Parallel + Longitude_of_Central_Meridian + False_Easting + False_Northing
FGDC-STD-001-1998
General_Vertical_Near-sided_Perspective = Height_of_Perspective_Point_Above_Surface + Longitude_of_Projection_Center + Latitude_of_Projection_Center + False_Easting + False_Northing Gnomonic = Longitude_of_Projection_Center + Latitude_of_Projection_Center + False_Easting + False_Northing Lambert_Azimuthal_Equal_Area = Longitude_of_Projection_Center + Latitude_of_Projection_Center + False_Easting + False_Northing Lambert_Conformal_Conic = 1{Standard_Parallel}2 +
20
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Longitude_of_Central_Meridian + Latitude_of_Projection_Origin + False_Easting + False_Northing Mercator = [Standard_Parallel | Scale_Factor_at_Equator] + Longitude_of_Central_Meridian + False_Easting + False_Northing Modified_Stereographic_for_Alaska = False_Easting + False_Northing Miller_Cylindrical = Longitude_of_Central_Meridian + False_Easting + False_Northing Oblique_Mercator = Scale_Factor_at_Center_Line + [Oblique_Line_Azimuth | Oblique_Line_Point] + Latitude_of_Projection_Origin + False_Easting + False_Northing Oblique_Line_Azimuth = Azimuthal_Angle + Azimuth_Measure_Point_Longitude Oblique_Line_Point = 2{Oblique_Line_Latitude + Oblique_Line_Longitude}2 Orthographic = Longitude_of_Projection_Center + Latitude_of_Projection_Center + False_Easting + False_Northing
FGDC-STD-001-1998
Polar_Stereographic = Straight-Vertical_Longitude_from_Pole + [Standard_Parallel | Scale_Factor_at_Projection_Origin] + False_Easting + False_Northing
21
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Polyconic = Longitude_of_Central_Meridian + Latitude_of_Projection_Origin + False_Easting + False_Northing Robinson = Longitude_of_Projection_Center + False_Easting + False_Northing Sinusoidal = Longitude_of_Central_Meridian + False_Easting + False_Northing Space_Oblique_Mercator_(Landsat) = Landsat_Number + Path_Number + False_Easting + False_Northing Stereographic = Longitude_of_Projection_Center + Latitude_of_Projection_Center + False_Easting + False_Northing Transverse_Mercator = Scale_Factor_at_Central_Meridian + Longitude_of_Central_Meridian + Latitude_of_Projection_Origin + False_Easting + False_Northing van_der_Grinten = Longitude_of_Central_Meridian + False_Easting + False_Northing
FGDC-STD-001-1998
Map_Projection_Parameters = Appropriate data elements 4.1.2.1.23.1 through 4.1.2.1.23.18 to document the map projection parameters. Grid_Coordinate_System = Grid_Coordinate_System_Name + [Universal_Transverse_Mercator | Universal_Polar_Stereographic | State_Plane_Coordinate_System | ARC_Coordinate_System |
22
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Other_Grid_System's_Definition] Universal_Transverse_Mercator = UTM_Zone_Number + Transverse_Mercator Universal_Polar_Stereographic = UPS_Zone_Identifier + Polar_Stereographic State_Plane_Coordinate_System = SPCS_Zone_Identifier + [Lambert_Conformal_Conic | Transverse_Mercator | Oblique_Mercator | Polyconic] ARC_Coordinate_System = ARC_System_Zone_Identifier + [Equirectangular | Azimuthal_Equidistant] Local_Planar = Local_Planar_Description + Local_Planar_Georeference_Information
FGDC-STD-001-1998
Planar_Coordinate_Information = Planar_Coordinate_Encoding_Method + [Coordinate_Representation | Distance_and_Bearing_Representation] + Planar_Distance_Units Coordinate_Representation = Abscissa_Resolution + Ordinate_Resolution Distance_and_Bearing_Representation = Distance_Resolution + Bearing_Resolution + Bearing_Units + Bearing_Reference_Direction + Bearing_Reference_Meridian Local = Local_Description + Local_Georeference_Information Geodetic_Model = 0{Horizontal_Datum_Name}1 + Ellipsoid_Name +
23
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Semi-major_Axis + Denominator_of_Flattening_Ratio Vertical_Coordinate_System_Definition = 0{Altitude_System_Definition}1 + 0{Depth_System_Definition}1 Altitude_System_Definition = Altitude_Datum_Name + 1{Altitude_Resolution}n + Altitude_Distance_Units + Altitude_Encoding_Method Depth_System_Definition = Depth_Datum_Name + 1{Depth_Resolution}n + Depth_Distance_Units + Depth_Encoding_Method 4.1
FGDC-STD-001-1998
Horizontal Coordinate System Definition -- the reference frame or system from which linear or angular quantities are measured and assigned to the position that a point occupies. Type: compound Short Name: horizsys Geographic -- the quantities of latitude and longitude which define the position of a point on the Earth's surface with respect to a reference spheroid. Type: compound Short Name: geograph Latitude Resolution -- the minimum difference between two adjacent latitude values expressed in Geographic Coordinate Units of measure. Type: real Domain: Latitude Resolution > 0.0 Short Name: latres Longitude Resolution -- the minimum difference between two adjacent longitude values expressed in Geographic Coordinate Units of measure. Type: real Domain: Longitude Resolution > 0.0 Short Name: longres Geographic Coordinate Units -- units of measure used for the latitude and longitude values. Type: text Domain: "Decimal degrees" "Decimal minutes" "Decimal seconds" "Degrees and decimal minutes" "Degrees, minutes, and decimal seconds" "Radians" "Grads" Short Name: geogunit Planar -- the quantities of distances, or distances and angles, which define the position of a
4.1.1
4.1.1.1
4.1.1.2
4.1.1.3
4.1.2
24
FGDC-STD-001-1998
point on a reference plane to which the surface of the Earth has been projected. Type: compound Short Name: planar 4.1.2.1 Map Projection -- the systematic representation of all or part of the surface of the Earth on a plane or developable surface. Type: compound Short Name: mapproj Map Projection Name -- name of the map projection. Type: text Domain: "Albers Conical Equal Area" "Azimuthal Equidistant" "Equidistant Conic" "Equirectangular" "General Vertical Near-sided Projection" "Gnomonic" "Lambert Azimuthal Equal Area" "Lambert Conformal Conic" "Mercator" "Modified Stereographic for Alaska" "Miller Cylindrical" "Oblique Mercator" "Orthographic" "Polar Stereographic" "Polyconic" "Robinson" "Sinusoidal" "Space Oblique Mercator" "Stereographic" "Transverse Mercator" "van der Grinten" free text Short Name: mapprojn Albers Conical Equal Area -- contains parameters for the Albers Conical Equal Area projection. Type: compound Short Name: albers Azimuthal Equidistant -- contains parameters for the Azimuthal Equidistant projection. Type: compound Short Name:azimequi Equidistant Conic -- contains parameters for the Equidistant Conic projection. Type: compound Short Name: equicon Equirectangular -- contains parameters for the Equirectangular projection. Type: compound Short Name: equirect General Vertical Near-sided Perspective -- contains parameters for the General Vertical Near-sided Perspective projection. Type: compound Short Name: gvnsp Gnomonic -- contains parameters for the Gnomonic projection. Type: compound Short Name: gnomonic Lambert Azimuthal Equal Area -- contains parameters for the Lambert Azimuthal Equal Area projection.
4.1.2.1.1
4.1.2.1.2
4.1.2.1.3
4.1.2.1.4
4.1.2.1.5
4.1.2.1.6
4.1.2.1.7
4.1.2.1.8
25
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Type: compound Short Name: lamberta 4.1.2.1.9
FGDC-STD-001-1998
Lambert Conformal Conic -- contains parameters for the Lambert Conformal Conic projection. Type: compound Short Name:lambertc Mercator -- contains parameters for the Mercator projection Type: compound Short Name: mercator Modified Stereographic for Alaska -- contains parameters for the Modified Stereographic for Alaska projection. Type: compound Short Name: modsak Miller Cylindrical -- contains parameters for the Miller Cylindrical projection. Type: compound Short Name: miller Oblique Mercator -- contains parameters for the Oblique Mercator projection. Type: compound Short Name: obqmerc
4.1.2.1.10
4.1.2.1.11
4.1.2.1.12
4.1.2.1.13
4.1.2.1.14
Orthographic -- contains parameters for the Orthographic projection. Type: compound Short Name:orthogr Polar Stereographic -- contains parameters for the Polar Stereographic projection. Type: compound Short Name:polarst Polyconic -- contains parameters for the Polyconic projection. Type: compound Short Name:polycon Robinson -- contains parameters for the Robinson projection. Type: compound Short Name: robinson Sinusoidal -- contains parameters for the Sinusoidal projection. Type: compound Short Name: sinusoid Space Oblique Mercator (Landsat) -- contains parameters for the Space Oblique Mercator (Landsat) projection. Type: compound
4.1.2.1.15
4.1.2.1.16
4.1.2.1.17
4.1.2.1.18
4.1.2.1.19
26
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Short Name: spaceobq 4.1.2.1.20
FGDC-STD-001-1998
Stereographic -- contains parameters for the Stereographic projection. Type: compound Short Name: stereo Transverse Mercator -- contains parameters for theTransverse mercator projection. Type: compound Short Name: transmer van der Grinten -- contains parameters for the van der Grinten projection. Type: compound Short Name: vdgrin Map Projection Parameters -- a complete parameter set of the projection that was used for the data set. The information provided shall include the names of the parameters and values used for the data set that describe the mathematical relationship between the Earth and the plane or developable surface for the projection. Type: compound Standard Parallel -- line of constant latitude at which the surface of the Earth and the plane or developable surface intersect. Type: real Domain: -90.0 <= Standard Parallel <= 90.0 Short Name: stdparll Longitude of Central Meridian -- the line of longitude at the center of a map projection generally used as the basis for constructing the projection. Type: real Domain: -180.0 <= Longitude of Central Meridian < 180.0 Short Name: longcm Latitude of Projection Origin -- latitude chosen as the origin of rectangular coordinates for a map projection. Type: real Domain: -90.0 <= Latitude of Projection Origin <= 90.0 Short Name: latprjo False Easting -- the value added to all "x" values in the rectangular coordinates for a map projection. This value frequently is assigned to eliminate negative numbers. Expressed in the unit of measure identified in Planar Coordinate Units. Type: real Domain: free real Short Name: feast False Northing -- the value added to all "y" values in the rectangular
4.1.2.1.21
4.1.2.1.22
4.1.2.1.23
4.1.2.1.23.1
4.1.2.1.23.2
4.1.2.1.23.3
4.1.2.1.23.4
4.1.2.1.23.5
27
FGDC-STD-001-1998
coordinates for a map projection. This value frequently is assigned to eliminate negative numbers. Expressed in the unit of measure identified in Planar Coordinate Units. Type: real Domain: free real Short Name: fnorth 4.1.2.1.23.6 Scale Factor at Equator -- a multiplier for reducing a distance obtained from a map by computation or scaling to the actual distance along the equator. Type: real Domain: Scale Factor at Equator > 0.0 Short Name: sfequat Height of Perspective Point Above Surface -- height of viewpoint above the Earth, expressed in meters. Type: real Domain: Height of Perspective Point Above Surface > 0.0 Short Name: heightpt Longitude of Projection Center -- longitude of the point of projection for azimuthal projections. Type: real Domain: -180.0 <= Longitude of Projection Center < 180.0 Short Name: longpc Latitude of Projection Center -- latitude of the point of projection for azimuthal projections. Type: real Domain: -90.0 <= Latitude of Projection Center <= 90.0 Short Name: latprjc Scale Factor at Center Line -- a multiplier for reducing a distance obtained from a map by computation or scaling to the actual distance along the center line. Type: real Domain: Scale Factor at Center Line > 0.0 Short Name: sfctrlin Oblique Line Azimuth -- method used to describe the line along which an oblique mercator map projection is centered using the map projection origin and an azimuth. Type: compound Short Name: obqlazim Azimuthal Angle -- angle measured clockwise from north, and expressed in degrees. Type: real Domain: 0.0 <= Azimuthal Angle < 360.0 Short Name: azimangl
4.1.2.1.23.7
4.1.2.1.23.8
4.1.2.1.23.9
4.1.2.1.23.10
4.1.2.1.23.11
4.1.2.1.23.11.1
28
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 4.1.2.1.23.11.2
FGDC-STD-001-1998
Azimuth Measure Point Longitude -- longitude of the map projection origin. Type: real Domain: -180.0 <= Azimuth Measure Point Longitude < 180.0 Short Name: azimptl Oblique Line Point -- method used to describe the line along which an oblique mercator map projection is centered using two points near the limits of the mapped region that define the center line. Type: compound Short Name: obqlpt Oblique Line Latitude -- latitude of a point defining the oblique line. Type: real Domain: -90.0 <= Oblique Line Latitude <= 90.0 Short Name: obqllat Oblique Line Longitude -- longitude of a point defining the oblique line. Type: real Domain: -180.0 <= Oblique Line Longitude < 180.0 Short Name: obqllong Straight Vertical Longitude from Pole -- longitude to be oriented straight up from the North or South Pole. Type: real Domain: -180.0 <= Straight Vertical Longitude from Pole < 180.0 Short Name: svlong Scale Factor at Projection Origin -- a multiplier for reducing a distance obtained from a map by computation or scaling to the actual distance at the projection origin. Type: real Domain: Scale Factor at Projection Origin > 0.0 Short Name: sfprjorg Landsat Number -- number of the Landsat satellite. (Note: This data element exists solely to provide a parameter needed to define the space oblique mercator projection. It is not used to identify data originating from a remote sensing vehicle.) Type: Integer Domain: free integer Short Name: landsat Path Number -- number of the orbit of the Landsat satellite. (Note: This data element exists solely to provide a parameter needed to define the space oblique mercator projection. It is not used to identify data
4.1.2.1.23.12
4.1.2.1.23.12.1
4.1.2.1.23.12.2
4.1.2.1.23.13
4.1.2.1.23.14
4.1.2.1.23.15
4.1.2.1.23.16
29
FGDC-STD-001-1998
originating from a remote sensing vehicle.) Type: integer Domain: 0 < Path Number < 251 for Landsats 1, 2, or 3 0 < Path Number < 233 for Landsats 4 or 5, free integer Short Name: pathnum 4.1.2.1.23.17 Scale Factor at Central Meridian -- a multiplier for reducing a distance obtained from a map by computation or scaling to the actual distance along the central meridian. Type: real Domain: Scale Factor at Central Meridian > 0.0 Short Name: sfctrmer Other Projections Definition -- a description of a projection, not defined elsewhere in the standard, that was used for the data set. The information provided shall include the name of the projection, names of parameters and values used for the data set, and the citation of the specification for the algorithms that describe the mathematical relationship between Earth and plane or developable surface for the projection. Type: text Domain: free text Grid Coordinate System -- a plane-rectangular coordinate system usually based on, and mathematically adjusted to, a map projection so that geographic positions can be readily transformed to and from plane coordinates. Type: compound Short Name gridsys Grid Coordinate System Name -- name of the grid coordinate system. Type: text Domain: "Universal Transverse Mercator" "Universal Polar Stereographic" "State Plane Coordinate System 1927" "State Plane Coordinate System 1983" "ARC Coordinate System" "other grid system" Short Name: gridsysn Universal Transverse Mercator (UTM) -- a grid system based on the transverse mercator projection, applied between latitudes 84 degrees north and 80 degrees south on the Earth's surface. Type: compound Short Name: utm UTM Zone Number -- identifier for the UTM zone. Type: integer Domain: 1 <= UTM Zone Number <= 60 for the northern hemisphere; -60 <= UTM Zone Number <= -1 for the southern hemisphere Short Name: utmzone
4.1.2.1.23.18
4.1.2.2
4.1.2.2.1
4.1.2.2.2
4.1.2.2.2.1
30
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 4.1.2.2.3
FGDC-STD-001-1998
Universal Polar Stereographic (UPS) -- a grid system based on the polar stereographic projection, applied to the Earth's polar regions north of 84 degrees north and south of 80 degrees south. Type: compound Short Name: ups UPS Zone Identifier -- identifier for the UPS zone. Type: text Domain: "A" "B" "Y" "Z" Short Name: upszone State Plane Coordinate System (SPCS) -- a plane-rectangular coordinate system established for each state in the United States by the National Geodetic Survey. Type: compound Short Name: spcs SPCS Zone Identifier -- identifier for the SPCS zone. Type: text Domain: Four-digit numeric codes for the State Plane Coordinate Systems based on the North American Datum of 1927 are found in Department of Commerce, 1986, Representation of geographic point locations for information interchange (Federal Information Processing Standard 70-1): Washington: Department of Commerce, National Institute of Standards and Technology. Codes for the State Plane Coordinate Systems based on the North American Datum of 1983 are found in Department of Commerce, 1989 (January), State Plane Coordinate System of 1983 (National Oceanic and Atmospheric Administration Manual NOS NGS 5): Silver Spring, Maryland, National Oceanic and Atmospheric Administration, National Ocean Service, Coast and Geodetic Survey. Short Name: spcszone ARC Coordinate System -- the Equal Arc-second Coordinate System, a planerectangular coordinate system established in Department of Defense, 1990, Military specification ARC Digitized Raster Graphics (ADRG) (MIL-A-89007): Philadelphia, Department of Defense, Defense Printing Service Detachment Office. Type: compound Short Name: arcsys ARC System Zone Identifier -- identifier for the ARC Coordinate System Zone. Type: integer Domain: 1 <= ARC System Zone Identifier <= 18 Short Name: arczone Other Grid System's Definition -- a complete description of a grid system, not defined elsewhere in this standard, that was used for the data set. The information provided shall include the name of the grid system, the names of
4.1.2.2.3.1
4.1.2.2.4
4.1.2.2.4.1
4.1.2.2.5
4.1.2.2.5.1
4.1.2.2.6
31
FGDC-STD-001-1998
the parameters and values used for the data set, and the citation of the specification for the algorithms that describe the mathematical relationship between the Earth and the coordinates of the grid system. Type: text Domain: free text Short Name: othergrd 4.1.2.3 Local Planar -- any right-handed planar coordinate system of which the z-axis coincides with a plumb line through the origin that locally is aligned with the surface of the Earth. Type: compound Short Name: localp Local Planar Description -- a description of the local planar system. Type: text Domain: free text Short Name: localpd Local Planar Georeference Information -- a description of the information provided to register the local planar system to the Earth (e.g. control points, satellite ephemeral data, inertial navigation data). Type: text Domain: free text Short Name: localpgi Planar Coordinate Information -- information about the coordinate system developed on the planar surface. Type: compound Short Name: planci Planar Coordinate Encoding Method -- the means used to represent horizontal positions. Type: text Domain: "coordinate pair" "distance and bearing" "row and column" Short Name: plance Coordinate Representation -- the method of encoding the position of a point by measuring its distance from perpendicular reference axes (the "coordinate pair" and "row and column" methods). Type: compound Short Name: coordrep Abscissa Resolution -- the (nominal) minimum distance between the "x" or column values of two adjacent points, expressed in Planar Distance Units of measure. Type: real Domain: Abscissa Resolution > 0.0 Short Name: absres Ordinate Resolution -- the (nominal) minimum distance between the "y"
4.1.2.3.1
4.1.2.3.2
4.1.2.4
4.1.2.4.1
4.1.2.4.2
4.1.2.4.2.1
4.1.2.4.2.2
32
FGDC-STD-001-1998
or row values of two adjacent points, expressed in Planar Distance Units of measure. Type: real Domain: Ordinate Resolution > 0.0 Short Name: ordres 4.1.2.4.3 Distance and Bearing Representation -- a method of encoding the position of a point by measuring its distance and direction (azimuth angle) from another point. Type: compound Short Name: distbrep Distance Resolution -- the minimum distance measurable between two points, expressed Planar Distance Units of measure. Type: real Domain: Distance Resolution > 0.0 Short Name: distres Bearing Resolution -- the minimum angle measurable between two points, expressed in Bearing Units of measure. Type: real Domain: Bearing Resolution > 0.0 Short Name: bearres Bearing Units -- units of measure used for angles. Type: text Domain: "Decimal degrees" "Decimal minutes" "Decimal seconds" Degrees and decimal minutes" "Degrees, minutes, and decimal seconds" "Radians" "Grads" Short Name: bearunit Bearing Reference Direction -- direction from which the bearing is measured. Type: text Domain: "North" "South" Short Name: bearrefd Bearing Reference Meridian -- axis from which the bearing is measured. Type: text Domain: "Assumed" "Grid" "Magnetic" "Astronomic" "Geodetic" Short Name: bearrefm Planar Distance Units -- units of measure used for distances. Type: text Domain: "meters" "international feet" "survey feet" free text Short Name: plandu Local -- a description of any coordinate system that is not aligned with the surface of the Earth. Type: compound
4.1.2.4.3.1
4.1.2.4.3.2
4.1.2.4.3.3
4.1.2.4.3.4
4.1.2.4.3.5
4.1.2.4.4
4.1.3
33
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Short Name: local 4.1.3.1
FGDC-STD-001-1998
Local Description -- a description of the coordinate system and its orientation to the surface of the Earth. Type: text Domain: free text Short Name: localdes Local Georeference Information -- a description of the information provided to register the local system to the Earth (e.g. control points, satellite ephemeral data, inertial navigation data). Type: text Domain: free text Short Name: localgeo Geodetic Model -- parameters for the shape of the earth. Type: compound Short Name: geodetic Horizontal Datum Name -- the identification given to the reference system used for defining the coordinates of points. Type: text Domain: "North American Datum of 1927" "North American Datum of 1983" free text Short Name: horizdn Ellipsoid Name -- identification given to established representations of the Earth's shape. Type: text Domain: "Clarke 1866" "Geodetic Reference System 80" free text Short Name: ellips Semi-major Axis -- radius of the equatorial axis of the ellipsoid. Type: real Domain: Semi-major Axis > 0.0 Short Name: semiaxis Denominator of Flattening Ratio -- the denominator of the ratio of the difference between the equatorial and polar radii of the ellipsoid when the numerator is set to 1. Type: real Domain: Denominator of Flattening > 0.0 Short Name: denflat
4.1.3.2
4.1.4
4.1.4.1
4.1.4.2
4.1.4.3
4.1.4.4
4.2
Vertical Coordinate System Definition -- the reference frame or system from which vertical distances (altitudes or depths) are measured. Type: compound Short Name: vertdef Altitude System Definition -- the reference frame or system from which altitudes (elevations) are measured. The term "altitude"' is used instead of the common term "elevation" to
4.2.1
34
FGDC-STD-001-1998
conform to the terminology in Federal Information Processing Standards 70-1 and 173. Type: compound Short Name: altsys 4.2.1.1 Altitude Datum Name -- the identification given to the surface taken as the surface of reference from which altitudes are measured. Type: text Domain: "National Geodetic Vertical Datum of 1929" "North American Vertical Datum of 1988" free text Short Name: altdatum Altitude Resolution -- the minimum distance possible between two adjacent altitude values, expressed in Altitude Distance Units of measure. Type: real Domain: Altitude Resolution > 0.0 Short Name: altres Altitude Distance Units -- units in which altitudes are recorded. Type: text Domain: "meters" "feet" free text Short Name: altunits Altitude Encoding Method -- the means used to encode the altitudes. Type: text Domain: "Explicit elevation coordinate included with horizontal coordinates" "Implicit coordinate" "Attribute values" Short Name: altenc Depth System Definition -- the reference frame or system from which depths are measured. Type: compound Short Name: depthsys Depth Datum Name -- the identification given to surface of reference from which depths are measured. Type: text Domain: "Local surface" "Chart datum; datum for sounding reduction" "Lowest astronomical tide" "Highest astronomical tide" "Mean low water" "Mean high water" "Mean sea level" "Land survey datum" "Mean low water springs" "Mean high water springs" "Mean low water neap" "Mean high water neap" "Mean lower low water" "Mean lower low water springs" "Mean higher high water" "Mean higher low water" "Mean lower high water" "Spring tide" "Tropic lower low water" "Neap tide" "High water" "Higher high water" "Low water" "Low-water datum" "Lowest low water" "Lower low water" "Lowest normal low water" "Mean tide level" "Indian spring low water" "High-water full and charge" "Low-water full and charge" "Columbia River datum" "Gulf Coast low water datum" "Equatorial springs low water" "Approximate lowest astronomical tide" "No correction" free text Short Name: depthdn
4.2.1.2
4.2.1.3
4.2.1.4
4.2.2
4.2.2.1
35
FGDC-STD-001-1998
Depth Resolution -- the minimum distance possible between two adjacent depth values, expressed in Depth Distance Units of measure. Type: real Domain: Depth Resolution > 0.0 Short Name: depthres Depth Distance Units -- units in which depths are recorded. Type: text Domain: "meters" "feet" free text Short Name: depthdu Depth Encoding Method -- the means used to encode depths. Type: text Domain: "Explicit depth coordinate included with horizontal coordinates" "Implicit coordinate" "Attribute values" Short Name: depthem
4.2.2.3
4.2.2.4
36
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Entity and Attribute Information 5
FGDC-STD-001-1998
Entity and Attribute Information -- details about the information content of the data set, including the entity types, their attributes, and the domains from which attribute values may be assigned. Type: compound Short Name: eainfo Entity_and_Attribute_Information = [1{Detailed_Description}n | 1{Overview_Description}n | 1{Detailed_Description}n + 1{Overview_Description}n] Detailed_Description = Entity_Type + 0{Attribute}n Entity_Type = Entity_Type_Label + Entity_Type_Definition + Entity_Type_Definition_Source Attribute = Attribute_Label + Attribute_Definition + Attribute_Definition_Source + 1{Attribute_Domain_Values}n + 0{Beginning_Date_of_Attribute_Values + 0{Ending_Date_of_Attribute_Values}1}n + (Attribute_Value_Accuracy_Information) + (Attribute_Measurement_Frequency) Attribute_Domain_Values = [Enumerated_Domain | Range_Domain | Codeset_Domain | Unrepresentable_Domain] Enumerated_Domain = 1{Enumerated_Domain_Value + Enumerated_Domain_Value_Definition + Enumerated_Domain_Value_Definition_Source + 0{Attribute}n }n Range_Domain = Range_Domain_Minimum + Range_Domain_Maximum + 0{Attribute_Units_of_Measure}1 + (Attribute_Measurement_Resolution) + 0{Attribute}n
37
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Codeset_Domain= Codeset_Name + Codeset_Source Attribute_Value_Accuracy_Information = Attribute_Value_Accuracy + Attribute_Value_Accuracy_Explanation Overview_Description =
FGDC-STD-001-1998
Entity_and_Attribute_Overview + 1{Entity_and_Attribute_Detail_Citation}n 5.1 Detailed Description -- description of the entities, attributes, attribute values, and related characteristics encoded in the data set. Type: compound Short Name: detailed Entity Type -- the definition and description of a set into which similar entity instances are classified. Type: compound Short Name: enttype Entity Type Label -- the name of the entity type. Type: text Domain: free text Short Name: enttypl Entity Type Definition -- the description of the entity type. Type: text Domain: free text Short Name: enttypd Entity Type Definition Source -- the authority of the definition. Type: text Domain: free text Short Name: enttypds Attribute -- a defined characteristic of an entity. Type: compound Short Name: attr Attribute Label -- the name of the attribute. Type: text Domain: free text Short Name: attrlabl Attribute Definition -- the description of the attribute. Type: text Domain: free text Short Name: attrdef
5.1.1
5.1.1.1
5.1.1.2
5.1.1.3
5.1.2
5.1.2.1
5.1.2.2
38
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 5.1.2.3 Attribute Definition Source -- the authority of the definition. Type: text Domain: free text Short Name: attrdefs
FGDC-STD-001-1998
5.1.2.4
Attribute Domain Values -- the valid values that can be assigned for an attribute. Type: compound Short Name: attrdomv Enumerated Domain -- the members of an established set of valid values. Type: compound Short Name: edom Enumerated Domain Value -- the name or label of a member of the set. Type: text Domain: free text Short Name: edomv Enumerated Domain Value Definition -- the description of the value. Type: text Domain: free text Short Name: edomvd Enumerated Domain Value Definition Source -- the authority of the definition. Type: text Domain: free text Short Name: edomvds Range Domain -- the minimum and maximum values of a continuum of valid values. Type: compound Short Name: rdom Range Domain Minimum -- the least value that the attribute can be assigned. Type: text Domain: free text Short Name: rdommin Range Domain Maximum -- the greatest value that the attribute can be assigned. Type: text Domain: free text Short Name: rdommax Codeset Domain -- reference to a standard or list which contains the members of an established set of valid values. Type: compound Short Name: codesetd
5.1.2.4.1
5.1.2.4.1.1
5.1.2.4.1.2
5.1.2.4.1.3
5.1.2.4.2
5.1.2.4.2.1
5.1.2.4.2.2
5.1.2.4.3
39
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 5.1.2.4.3.1 Codeset Name -- the title of the codeset. Type: text Domain: free text Short Name: codesetn Codeset Source -- the authority for the codeset. Type: text Domain: free text Short Name: codesets
FGDC-STD-001-1998
5.1.2.4.3.2
5.1.2.4.4
Unrepresentable Domain -- description of the values and reasons why they cannot be represented. Type: text Domain: free text Short Name: udom Attribute Units of Measure -- the standard of measurement for an attribute value. Type: text Domain: free text Short Name: attrunit Attribute Measurement Resolution -- the smallest unit increment to which an attribute value is measured. Type: real Domain: Attribute Measurement Resolution > 0.0 Short Name: attrmres Beginning Date of Attribute Values -- earliest or only date for which the attribute values are current. In cases when a range of dates are provided, this is the earliest date for which the information is valid. Type: date Domain: free date Short Name: begdatea Ending Date of Attribute Values -- latest date for which the information is current. Used in cases when a range of dates are provided. Type: date Domain: free date Short Name: enddatea Attribute Value Accuracy Information -- an assessment of the accuracy of the assignment of attribute values. Type: compound Short Name: attrvai Attribute Value Accuracy -- an estimate of the accuracy of the assignment of attribute values. Type: real Domain: free real Short Name: attrva
5.1.2.5
5.1.2.6
5.1.2.7
5.1.2.8
5.1.2.9
5.1.2.9.1
40
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 5.1.2.9.2
FGDC-STD-001-1998
Attribute Value Accuracy Explanation -- the definition of the Attribute Value Accuracy measure and units, and a description of how the estimate was derived. Type: text Domain: free text Short Name: attrvae Attribute Measurement Frequency -- the frequency with which attribute values are added. Type: real Domain: "Unknown" "As needed" "Irregular" "None planned" free text Short Name: attrmfrq
5.1.2.10
5.2
Overview Description -- summary of, and citation to detailed description of, the information content of the data set. Type: compound Short Name: overview Entity and Attribute Overview -- detailed summary of the information contained in a data set. Type: text Domain: free text Short Name: eaover Entity and Attribute Detail Citation -- reference to the complete description of the entity types, attributes, and attribute values for the data set. Type: text Domain: free text Short Name: eadetcit
5.2.1
5.2.2
41
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Distribution Information 6
FGDC-STD-001-1998
Distribution Information -- information about the distributor of and options for obtaining the data set. Type: compound Short Name: distinfo Distribution_Information = Distributor + 0{Resource_Description}1 + Distribution_Liability + 0{Standard_Order_Process}n + 0{Custom_Order_Process}1 + (Technical_Prerequisites) + (Available_Time_Period) Distributor = Contact_Information (see section 10 for production rules) Standard_Order_Process = [Non-digital_Form | 1{Digital_Form}n ] + Fees + (Ordering_Instructions) + (Turnaround) Digital_Form = Digital_Transfer_Information + Digital_Transfer_Option Digital_Transfer_Information = Format_Name + ([Format_Version_Number | Format_Version_Date] + (Format_Specification) ) + (Format_Information_Content) + 0{File_Decompression_Technique}1 + (Transfer_Size) Digital_Transfer_Option = 1{ [Online_Option | Offline_Option] }n Online_Option = 1{Computer_Contact_Information}n + (Access_Instructions) + (Online_Computer_and_Operating_System) Computer_Contact_Information = [Network_Address |
42
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Dialup_Instructions]
FGDC-STD-001-1998
Network_Address = 1{Network_Resource_Name}n Dialup_Instructions = Lowest_BPS + 0{Highest_BPS}1 + Number_DataBits + Number_StopBits + Parity + 0{Compression_Support}1 + 1{Dialup_Telephone}n + 1{Dialup_File_Name}n Offline_Option = Offline_Media + 0{Recording_Capacity}1 1{Recording_Format}n + 0{Compatibility_Information}1 Recording_Capacity = 1{Recording Density}n + Recording_Density_Units Available_Time_Period = Time_Period_Information (see section 9 for production rules) 6.1 Distributor -- the party from whom the data set may be obtained. Type: compound Short Name: distrib Resource Description -- the identifier by which the distributor knows the data set. Type: text Domain: free text Short Name: resdesc Distribution Liability -- statement of the liability assumed by the distributor. Type: text Domain: free text Short Name: distliab Standard Order Process -- the common ways in which the data set may be obtained or received, and related instructions and fee information. Type: compound Short Name: stdorder Non-digital Form -- the description of options for obtaining the data set on non-computercompatible media. Type: text
6.2
6.3
6.4
6.4.1
43
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Domain: free text Short Name: nondig 6.4.2
FGDC-STD-001-1998
Digital Form -- the description of options for obtaining the data set on computer-compatible media. Type: compound Short Name: digform Digital Transfer Information - description of the form of the data to be distributed. Type: compound Short Name: digtinfo Format Name -- the name of the data transfer format. Type: text Domain: domain values from the table below; free text Short Name: formname Domain Value "ARCE" "ARCG" "ASCII" format "BIL" "BIP" "BSQ" "CDF" "CFF" "COORD" "DEM" Survey) "DFAD"
6.4.2.1
6.4.2.1.1
Definition ARC/INFO Export format ARC/INFO Generate format ASCII file, formatted for text attributes, declared Imagery, band interleaved by line Imagery, band interleaved by pixel Imagery, band interleaved sequential Common Data Format Cartographic Feature File (U.S. Forest Service) User-created coordinate file, declared format Digital Elevation Model format (U.S. Geological
Digital Feature Analysis Data (National Imagery and Mapping Agency) "DGN" Microstation format (Intergraph Corporation) "DIGEST" Digital Geographic Information Exchange Standard "DLG" Digital Line Graph (U.S. Geological Survey) "DTED" Digital Terrain Elevation Data (MIL-D-89020) "DWG" AutoCAD Drawing format "DX90" Data Exchange '90 "DXF" AutoCAD Drawing Exchange Format "ERDAS" ERDAS image files (ERDAS Corporation) "GRASS" Geographic Resources Analysis Support System "HDF" Hierarchical Data Format "IGDS" Interactive Graphic Design System format (Intergraph Corporation) "IGES" Initial Graphics Exchange Standard "MOSS" Multiple Overlay Statistical System export file "netCDF" network Common Data Format "NITF" National Imagery Transfer Format "RPF" Raster Product Format
44
FGDC-STD-001-1998
"RVC" "RVF" "SDTS" "SIF" "SLF" "TIFF" "TGRLN"
"VPF"
(National Imagery and Mapping Agency) Raster Vector Converted format (MicroImages) Raster Vector Format (MicroImages) Spatial Data Transfer Standard (Federal Information Processing Standard 173) Standard Interchange Format (DOD Project 2851) Standard Linear Format (National Imagery and Mapping Agency) Tagged Image File Format Topologically Integrated Geographic Encoding and Referencing (TIGER) Line format (Bureau of the Census) Vector Product Format (National Imagery and Mapping Agency)
6.4.2.1.2
Format Version Number -- version number of the format. Type: text Domain: free text Short Name: formvern Format Version Date -- date of the version of the format. Type: date Domain: free date Short Name: formverd Format Specification -- name of a subset, profile, or product specification of the format. Type: text Domain: free text Short Name: formspec Format Information Content -- description of the content of the data encoded in a format. Type: text Domain: free text Short Name: formcont File Decompression Technique -- recommendations of algorithms or processes (including means of obtaining these algorithms or processes) that can be applied to read or expand data sets to which data compression techniques have been applied. Type: text Domain: "No compression applied", free text Short Name: filedec Transfer Size -- the size, or estimated size, of the transferred data set in megabytes. Type: real Domain: Transfer Size > 0.0 Short Name: transize
6.4.2.1.3
6.4.2.1.4
6.4.2.1.5
6.4.2.1.6
6.4.2.1.7
45
FGDC-STD-001-1998
Digital Transfer Option -- the means and media by which a data set is obtained from the distributor. Type: compound Short Name: digtopt Online Option -- information required to directly obtain the data set electronically. Type: compound Short Name: onlinopt Computer Contact Information -- instructions for establishing communications with the distribution computer. Type: compound Short Name: computer Network Address -- the electronic address from which the data set can be obtained from the distribution computer. Type: compound Short Name: networka Network Resource Name -- the name of the file or service from which the data set can be obtained. Type: text Domain: free text Short Name: networkr Dialup Instructions -- information required to access the distribution computer remotely through telephone lines. Type: compound Short Name: dialinst Lowest BPS -- lowest or only speed for the connection's communication, expressed in bits per second. Type: integer Domain: Lowest BPS >= 110 Short Name: lowbps Highest BPS -- highest speed for the connection's communication, expressed in bits per second. Used in cases when a range of rates are provided. Type: integer Domain: Highest BPS > Lowest BPS Short Name: highbps Number DataBits -- number of data bits in each character exchanged in the communication. Type: integer Domain: 7 <= Number DataBits <= 8 Short Name: numdata
6.4.2.2.1
6.4.2.2.1.1
6.4.2.2.1.1.1
6.4.2.2.1.1.1.1
6.4.2.2.1.1.2
6.4.2.2.1.1.2.1
6.4.2.2.1.1.2.2
6.4.2.2.1.1.2.3
46
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata 6.4.2.2.1.1.2.4
FGDC-STD-001-1998
Number StopBits -- number of stop bits in each character exchanged in the communication. Type: integer Domain: 1 <= Number StopBits <= 2 Short Name: numstop Parity -- parity error checking used in each character exchanged in the communication. Type: text Domain: "None" "Odd" "Even" "Mark" "Space" Short Name: parity Compression Support -- data compression available through the modem service to speed data transfer. Type: text Domain: "V.32" "V.32bis" "V.42" "V.42bis" free text Short Name: compress Dialup Telephone -- the telephone number of the distribution computer. Type: text Domain: free text Short Name: dialtel Dialup File Name -- the name of a file containing the data set on the distribution computer. Type: text Domain: free text Short Name: dialfile Access Instructions -- instructions on the steps required to access the data set. Type: text Domain: free text Short Name: accinstr Online Computer and Operating System -- the brand of distribution computer and its operating system. Type: text Domain: free text Short Name: oncomp Offline Option -- information about media-specific options for receiving the data set. Type: compound Short Name: offoptn Offline Media -- name of the media on which the data set can be received.
6.4.2.2.1.1.2.5
6.4.2.2.1.1.2.6
6.4.2.2.1.1.2.7
6.4.2.2.1.1.2.8
6.4.2.2.1.2
6.4.2.2.1.3
6.4.2.2.2
6.4.2.2.2.1
47
FGDC-STD-001-1998
Type: text Domain: "CD-ROM" "3-1/2 inch floppy disk" "5-1/4 inch floppy disk" "9-track tape" "4 mm cartridge tape" "8 mm cartridge tape" "1/4-inch cartridge tape" free text Short Name: offmedia 6.4.2.2.2.2 Recording Capacity -- the density of information to which data are written. Used in cases where different recording capacities are possible. Type: compound Short Name: reccap Recording Density -- the density in which the data set can be recorded. Type: real Domain: Recording Density > 0.0 Short Name: recden Recording Density Units -- the units of measure for the recording density. Type: text Domain: free text Short Name: recdenu Recording Format -- the options available or method used to write the data set to the medium. Type: text Domain: "cpio" "tar" "High Sierra" "ISO 9660" "ISO 9660 with Rock Ridge extensions" "ISO 9660 with Apple HFS extensions" free text Short Name: recfmt Compatibility Information --- description of other limitations or requirements for using the medium. Type: text Domain: free text Short Name: compat Fees -- the fees and terms for retrieving the data set. Type: text Domain: free text Short Name: fees Ordering Instructions -- general instructions and advice about, and special terms and services provided for, the data set by the distributor. Type: text Domain: free text Short Name: ordering Turnaround -- typical turnaround time for the filling of an order. Type: text
6.4.2.2.2.2.1
6.4.2.2.2.2.2
6.4.2.2.2.3
6.4.2.2.2.4
6.4.3
6.4.4
6.4.5
48
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Domain: free text Short Name: turnarnd 6.5
FGDC-STD-001-1998
Custom Order Process -- description of custom distribution services available, and the terms and conditions for obtaining these services. Type: text Domain: free text Short Name: custom Technical Prerequisites -- description of any technical capabilities that the consumer must have to use the data set in the form(s) provided by the distributor. Type: text Domain: free text Short Name: techpreq Available Time Period -- the time period when the data set will be available from the distributor. Type: compound Short Name: availabl
6.6
6.7
49
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Metadata Reference Information 7
FGDC-STD-001-1998
Metadata Reference Information -- information on the currentness of the metadata information, and the responsible party. Type: compound Short Name: metainfo Metadata_Reference_Information = Metadata_Date + (Metadata_Review_Date) + (Metadata_Future_Review_Date) + Metadata_Contact + Metadata_Standard_Name + Metadata_Standard_Version + 0{Metadata_Time_Convention}1 + (Metadata_Access_Constraints) + (Metadata_Use_Constraints) + (Metadata_Security_Information) + 0{Metadata_Extensions}n Metadata_Contact = Contact_Information (see section 10 for production rules) Metadata_Security_Information = Metadata_Security_Classification_System + Metadata_Security_Classification + Metadata_Security_Handling_Description Metadata_Extensions = 0{Online_Linkage}n + 0{Profile_Name}1
7.1
Metadata Date -- the date that the metadata were created or last updated. Type: date Domain: free date Short Name: metd Metadata Review Date -- the date of the latest review of the metadata entry. Type: date Domain: free date; Metadata Review Date later than Metadata Date Short Name: metrd Metadata Future Review Date -- the date by which the metadata entry should be reviewed. Type: date Domain: free date; Metadata Future Review Date later than Metadata Review Date Short Name: metfrd Metadata Contact -- the party responsible for the metadata information. Type: compound
7.2
7.3
7.4
50
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Short Name: metc 7.5
FGDC-STD-001-1998
Metadata Standard Name -- the name of the metadata standard used to document the data set. Type: text Domain: "FGDC Content Standard for Digital Geospatial Metadata" free text Short Name: metstdn Metadata Standard Version -- identification of the version of the metadata standard used to document the data set. Type: text Domain: free text Short Name: metstdv Metadata Time Convention -- form used to convey time of day information in the metadata entry. Used if time of day information is included in the metadata for a data set. Type: text Domain: "local time" "local time with time differential factor" "universal time" Short Name: mettc Metadata Access Constraints -- restrictions and legal prerequisites for accessing the metadata. These include any access constraints applied to assure the protection of privacy or intellectual property, and any special restrictions or limitations on obtaining the metadata. Type: text Domain: free text Short Name: metac Metadata Use Constraints -- restrictions and legal prerequisites for using the metadata after access is granted. These include any metadata use constraints applied to assure the protection of privacy or intellectual property, and any special restrictions or limitations on using the metadata. Type: text Domain: free text Short Name: metuc
7.6
7.7
7.8
7.9
7.10 Metadata Security Information -- handling restrictions imposed on the metadata because of national security, privacy, or other concerns. Type: compound Short Name: metsi 7.10.1 Metadata Security Classification System -- name of the classification system for the metadata. Type: text Domain: free text Short Name: metscs Metadata Security Classification -- name of the handling restrictions on the metadata. Type: text Domain: "Top secret" "Secret" "Confidential" "Restricted" "Unclassified" "Sensitive" free text Short Name: metsc
7.10.2
51
FGDC-STD-001-1998
Metadata Security Handling Description -- additional information about the restrictions on handling the metadata. Type: text Domain: free text Short Name: metshd
7.11 Metadata Extensions a reference to extended elements to the standard which may be defined by a metadata producer or a user community. Extended elements are elements outside the Standard, but needed by the metadata producer. If extended elements are created, they must follow the guidelines in Appendix D, Guidelines for Creating Extended Elements to the Content Standard for Digital Geospatial Metadata. Type: compound Short Name: metextns 7.11.1 Online Linkage -- the name of an online computer resource that contains the metadata extension information for the data set. Entries should follow the Uniform Resource Locator convention of the Internet. Type: text Domain: free text Short Name: onlink Profile Name -- the name given to a document that describes the application of the Standard to a specific user community. Type: text Domain: free text Short Name: metprof
7.11.2
52
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Citation Information 8
FGDC-STD-001-1998
Citation Information -- the recommended reference to be used for the data set. (Note: this section provides a means of stating the citation of a data set, and is used by other sections of the metadata standard. This section is never used alone.) Type: compound Short Name: citeinfo Citation_Information = 1{Originator}n + Publication_Date + (Publication_Time) + Title + 0{Edition}1 + 0{Geospatial_Data_Presentation_Form}1 + 0{Series_Information}1 + 0{Publication_Information}1 + 0{Other_Citation_Details}1 + (1{Online_Linkage}n) + 0{Larger_Work_Citation}1 Series_Information = Series_Name + Issue_Identification Publication_Information = Publication_Place + Publisher Larger_Work_Citation = Citation_Information
8.1
Originator -- the name of an organization or individual that developed the data set. If the name of editors or compilers are provided, the name must be followed by "(ed.)" or "(comp.)" respectively. Type: text Domain: "Unknown" free text Short Name: origin Publication Date -- the date when the data set is published or otherwise made available for release. Type: date Domain: "Unknown" "Unpublished material" free date Short Name: pubdate Publication Time -- the time of day when the data set is published or otherwise made available for release. Type: time Domain: "Unknown" free time Short Name: pubtime Title -- the name by which the data set is known.
8.2
8.3
8.4
53
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Type: text Domain: free text Short Name: title 8.5 Edition -- the version of the title. Type: text Domain: free text Short Name: edition
FGDC-STD-001-1998
8.6
Geospatial Data Presentation Form -- the mode in which the geospatial data are represented. Type: text Domain: (the listed domain is partially from pp. 88-91 in Anglo-American Committee on Cataloguing of Cartographic Materials, 1982, Cartographic materials: A manual of interpretation for AACR2: Chicago, American Library Association): "atlas" audio "diagram" document "globe" "map" "model" multimedia presentation "profile" raster digital data "remote-sensing image" "section" spreadsheet tabular digital data vector digital data video "view" free text Short Name: geoform Series Information -- the identification of the series publication of which the data set is a part. Type: compound Short Name: serinfo Series Name -- the name of the series publication of which the data set is a part. Type: text Domain: free text Short Name: sername Issue Identification -- information identifying the issue of the series publication of which the data set is a part. Type: text Domain: free text Short Name: issue Publication Information -- publication details for published data sets. Type: compound Short Name: pubinfo Publication Place -- the name of the city (and state or province, and country, if needed to identify the city) where the data set was published or released. Type: text Domain: free text Short Name: pubplace Publisher -- the name of the individual or organization that published the data set. Type: text Domain: free text Short Name: publish Other Citation Details -- other information required to complete the citation.
8.7
8.7.1
8.7.2
8.8
8.8.1
8.8.2
8.9
54
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Type: text Domain: free text Short Name: othercit
FGDC-STD-001-1998
8.10 Online Linkage -- the name of an online computer resource that contains the data set. Entries should follow the Uniform Resource Locator convention of the Internet. Type: text Domain: free text Short Name: onlink 8.11 Larger Work Citation -- the information identifying a larger work in which the data set is included. Type: compound Short Name: lworkcit
55
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Time Period Information 9
FGDC-STD-001-1998
Time Period Information -- information about the date and time of an event. (Note: this section provides a means of stating temporal information, and is used by other sections of the metadata standard. This section is never used alone.) Type: compound Short Name: timeinfo Time_Period_Information = [Single_Date/Time | Multiple_Dates/Times | Range_of_Dates/Times ] Single_Date/Time = Calendar_Date + (Time_of_Day) Multiple_Dates/Times = 2{Single_Date/Time}n Range_of_Dates/Times = Beginning_Date + (Beginning_Time) + Ending_Date + (Ending_Time)
9.1
Single Date/Time -- means of encoding a single date and time. Type: compound Short Name: sngdate Calendar Date -- the year (and optionally month, or month and day). Type: date Domain: "Unknown" free date Short Name: caldate Time of Day -- the hour (and optionally minute, or minute and second) of the day. Type: time Domain: "Unknown" free time Short Name: time Multiple Dates/Times -- means of encoding multiple individual dates and times. Type: compound Short Name: mdattim Range of Dates/Times -- means of encoding a range of dates and times. Type: compound Short Name: rngdates Beginning Date -- the first year (and optionally month, or month and day) of the event. Type: date
9.1.1
9.1.2
9.2
9.3
9.3.1
56
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Domain: "Unknown" free date Short Name: begdate 9.3.2
FGDC-STD-001-1998
Beginning Time -- the first hour (and optionally minute, or minute and second) of the day for the event. Type: time Domain: "Unknown" free time Short Name: begtime Ending Date -- the last year (and optionally month, or month and day) for the event. Type: date Domain: "Unknown" "Present" free date Short Name: enddate Ending Time -- the last hour (and optionally minute, or minute and second) of the day for the event. Type: time Domain: "Unknown" free time Short Name: endtime
9.3.3
9.3.4
57
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Contact Information 10
FGDC-STD-001-1998
Contact Information -- Identity of, and means to communicate with, person(s) and organization(s) associated with the data set. (Note: this section provides a means of identifying individuals and organizations, and is used by other sections of the metadata standard. This section is never used alone.) Type: compound Short Name: cntinfo Contact_Information = [Contact_Person_Primary | Contact_Organization_Primary] + (Contact_Position) + 1{Contact_Address}n + 1{Contact_Voice_Telephone}n + (1{Contact_TDD/TTY_Telephone}n) + (1{Contact_Facsimile_Telephone}n) + (1{Contact_Electronic_Mail_Address}n) + (Hours_of_Service) + (Contact_Instructions) Contact_Person_Primary = Contact_Person + (Contact_Organization) Contact_Organization_Primary = Contact_Organization + (Contact_Person) Contact_Address = Address_Type + 0{Address}n + City + State_or_Province + Postal_Code + (Country)
10.1 Contact Person Primary -- the person, and the affiliation of the person, associated with the data set. Used in cases where the association of the person to the data set is more significant than the association of the organization to the data set. Type: compound Short Name: cntperp 10.1.1 Contact Person -- the name of the individual to which the contact type applies. Type: text Domain: free text Short Name: cntper Contact Organization -- the name of the organization to which the contact type applies. Type: text
10.1.2
58
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Domain: free text Short Name: cntorg
FGDC-STD-001-1998
10.2 Contact Organization Primary -- the organization, and the member of the organization, associated with the data set. Used in cases where the association of the organization to the data set is more significant than the association of the person to the data set. Type: compound Short Name: cntorgp 10.3 Contact Position -- the title of individual. Type: text Domain: free text Short Name: cntpos 10.4 Contact Address -- the address for the organization or individual. Type: compound Short Name: cntaddr 10.4.1 Address Type -- the information provided by the address. Type: text Domain: "mailing" "physical" "mailing and physical", free text Short Name: addrtype Address -- an address line for the address. Type: text Domain: free text Short Name: address City -- the city of the address. Type: text Domain: free text Short Name: city State or Province -- the state or province of the address. Type: text Domain: free text Short Name: state Postal Code -- the ZIP or other postal code of the address. Type: text Domain: free text Short Name: postal Country -- the country of the address. Type: text Domain: free text Short Name: country
10.4.2
10.4.3
10.4.4
10.4.5
10.4.6
10.5 Contact Voice Telephone -- the telephone number by which individuals can speak to the organization or individual.
59
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Type: text Domain: free text Short Name: cntvoice
FGDC-STD-001-1998
10.6 Contact TDD/TTY Telephone -- the telephone number by which hearing-impaired individuals can contact the organization or individual. Type: text Domain: free text Short Name: cnttdd 10.7 Contact Facsimile Telephone -- the telephone number of a facsimile machine of the organization or individual. Type: text Domain: free text Short Name: cntfax 10.8 Contact Electronic Mail Address -- the address of the electronic mailbox of the organization or individual. Type: text Domain: free text Short Name: cntemail 10.9 Hours of Service -- time period when individuals can speak to the organization or individual. Type: text Domain: free text Short Name: hours 10.10 Contact Instructions -- supplemental instructions on how or when to contact the individual or organization. Type: text Domain: free text Short Name: cntinst
60
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix A, Glossary
FGDC-STD-001-1998
Appendix A Glossary [Most of the terms and definitions are from Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information Processing Standard 173): Washington: Department of Commerce, National Institute of Standards and Technology.]
abscissa -- the coordinate of a point in a plane Cartesian coordinate system obtained by measuring parallel to the x-axis ("the 'x' value"). accuracy -- the closeness of results of observations, computations or estimates to the true values or the values accepted as being true. altitude -- elevation above or below a reference datum, as defined in Federal Information Processing Standard 70-1. See also elevation. area -- a generic term for a bounded, continuous, two-dimensional object that may or may not include its boundary. area chain -- a chain that explicitly references left and right polygons and not start and end nodes. It is a component of a two-dimensional manifold. area point -- a representative point within an area usually carrying attribute information about that area. arc -- a locus of points that forms a curve that is defined by a mathematical expression. attribute -- a defined characteristic of an entity type (e.g. composition). attribute value -- a specific quality or quantity assigned to an attribute (e.g., steel), for a specific entity instance. cardinality --the number of elements in an extended compound element chain -- a directed nonbranching sequence of nonintersecting line segments and (or) arcs bounded by nodes, not necessarily distinct, at each end. Area chain, complete chain, and network chain are special cases of chain, and share all characteristics of the general case as defined above. child -- the name of the data element which may occur under this data element. A child element may be an extended or a standard element. clearinghouse -- see National Geospatial Data Clearinghouse. complete chain -- a chain that explicitly references left and right polygons and start and end nodes. It is a component of a two-dimensional manifold. compound element -- a group of data elements and other compound elements. Compound elements represent higher-level concepts that cannot be represented by individual data elements.
61
FGDC-STD-001-1998
coordinates -- pairs of numbers expressing horizontal distances along orthogonal axes; alternatively, triplets of numbers measuring horizontal and vertical distances. data element -- a logically primitive item of data. data set -- a collection of related data. depth -- perpendicular distance of an interior point from the surface of an object. developable surface -- a surface that can be flattened to form a plane without compressing or stretching any part of it. Examples include cones and cylinders. digital image -- a two-dimensional array of regularly spaced picture elements (pixels) constituting a picture. digital volume -- a three-dimensional array of regularly spaced volume elements (voxels) constituting a volume. domain -- in the definition of the elements in the metadata standard, the domain identifies valid values for a data element. Edge, Topology Level 0 -- VPF term for a string. Edge, Topology Level 1 -- VPF term for a network chain in a network (in SDTS, a "Network chain, nonplanar graph"). Edge, Topology Level 2 -- VPF term for a network chain in a planar graph (in SDTS, a "Network chain, planar graph"). Edge, Topology Level 3 -- VPF term for a complete chain. elevation -- conforming to Federal Information Processing Standard 70-1, the term "altitude" is used in this standard, rather than the common term elevation. entity instance -- a spatial phenomenon of a defined type that is embedded in one or more phenomena of different type, or that has at least one key attribute value different from the corresponding attribute values of surrounding phenomena (e.g., the 10 Street Bridge). entity point -- a point used for identifying the location of point features (or areal features collapsed to a point), such as towers, buoys, buildings, places, etc. entity type -- the definition and description of a set into which similar entity instances are classified (e.g., bridge). explicit -- method of identifying positions directly by pairs (for horizontal positions) or triplets (for horizontal and vertical positions) of numbers. extended element -- a user-defined metadata element included in a metadata collection. Extended elements may be defined by a data set producer or a user community. Extended elements are elements
62
FGDC-STD-001-1998
outside the Standard, but needed by the data set producer. If extended elements are created, they must follow the guidelines in Appendix D, Guidelines for Creating Extended Elements in the Content Standard for Digital Geospatial Metadata. Face, Topology Level 3 -- VPF term for a GT-polygon composed of rings. G-polygon -- an area consisting of an interior area, one outer G-ring and zero or more nonintersecting, nonnested inner G-rings. No ring, inner or outer, shall be collinear with or intersect any other ring of the same G-polygon. G-ring --a string composed of pairs of longitude and latitude coordinates that define a closed nonintersecting boundary. G-ring point -- a scalar consisting of a set of ordered pairs of floating-point numbers, separated by commas, in which the first number in each pair is the longitude of a point and the second is the latitude of the point. Longitude and latitude are specified in decimal degrees with north latitudes positive and south negative, east longitude positive and west negative. geospatial data -- information that identifies the geographic location and characteristics of natural or constructed features and boundaries on the earth. This information may be derived from, among other things, remote sensing, mapping, and surveying technologies. graph -- a set of topologically interrelated zero-dimensional (node), one-dimensional (link or chain), and sometimes two-dimensional (GT-polygon) objects that conform to a set of defined constraint rules. Numerous rule sets can be used to distinguish different types of graphs. Three such types, planar graph, network, and two-dimensional manifold, are used in this standard. All three share the following rules: each link or chain is bounded by an ordered pair of nodes, not necessarily distinct; a node may bound one or more links or chains; and links or chains may only intersect at nodes. Planar graphs and networks are two specialized types of graphs, and a two-dimensional manifold is an even more specific type of planar graph. grid -- (1) a set of grid cells forming a regular, or nearly regular, tessellation of a surface; (2) a set of points arrayed in a pattern that forms a regular, or nearly regular, tessellation of a surface. The tessellation is regular if formed by repeating the pattern of a regular polygon, such as a square, equilateral triangle, or regular hexagon. The tessellation is nearly regular if formed by repeating the pattern of an "almost" regular polygon such as a rectangle, non-square parallelogram, or non-equilateral triangle. grid cell -- a two-dimensional object that represents the smallest nondivisible element of a grid. GT-polygon -- an area that is an atomic two-dimensional component of one and only one two-dimensional manifold. The boundary of a GT-polygon may be defined by GT-rings created from its bounding chains. A GT-polygon may also be associated with its chains (either the bounding set, or the complete set) by direct reference to these chains. The complete set of chains associated with a GT-polygon may also be found by examining the polygon references on the chains. GT-ring -- a ring created from complete and (or) area chains. horizontal -- tangent to the geoid or parallel to a plane that is tangent to the geoid.
63
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix A, Glossary implicit -- method of identifying positions by a place in an array of values. interior area -- an area not including its boundary.
FGDC-STD-001-1998
label point -- a reference point used for displaying map and chart text (e.g., feature names) to assist in feature identification. latitude -- angular distance measured on a meridian north or south from the equator. layer -- an integrated, areally distributed, set of spatial data usually representing entity instances within one theme, or having one common attribute or attribute value in an association of spatial objects. In the context of raster data, a layer is specifically a two-dimensional array of scalar values associated with all of part of a grid or image. line -- a generic term for a one-dimensional object. line segment -- a direct line between two points. link -- a topological connection between two nodes. A link may be directed by ordering its nodes. longitude -- angular distance between the plane of a meridian east or west from the plane of the meridian of Greenwich. map -- a spatial representation, usually graphic on a flat surface, of spatial phenomena. media -- the physical devices used to record, store, and (or) transmit data. meridian -- a great circle on the Earth that passes through the geographic poles. metadata -- data about the content, quality, condition, and other characteristics of data. name -- the name of an extended element. The extended element name must not be the name of any other element in the Standard. National Geospatial Data Clearinghouse -- a distributed network of geospatial data producers, managers, and users linked electronically. Building on initiatives such as the national information infrastructure, the clearinghouse uses a distributed, electronically connected network, such as the Internet. Each data provider will describe available data in an electronic form, and provide these descriptions (or "metadata") using means that can be accessed over a communications network. Thus, the data for the clearinghouse are located at the sites of data producers (or, where more efficient, at the sites of intermediaries) throughout the country. Using the network, users will search these descriptions to locate data that are suitable for their applications. network -- a graph without two dimensional objects. If projected onto a two-dimensional surface, a network can have either more than one node at a point and (or) intersecting links or chains without corresponding nodes. network chain -- a chain that explicitly references start and end nodes and not left and right polygons. It is a component of a network.
64
FGDC-STD-001-1998
node -- a zero-dimensional object that is a topological junction of two or more links or chains, or an end point of a link or chain. Node, Topology Level 0 -- VPF term for a point (in SDTS, a "point"). Node, Topology Level 1 -- VPF term for a node on a network (in SDTS, a "node, network"). Node, Topology Level 2 -- VPF term for a node on a planar graph (in SDTS, a "node, planar graph"). Node, Topology Level 3 -- VPF term for a point used to represent isolated features. These are topologically linked to a containing face. object -- a digital representation of all or part of an entity instance. optionality - The optionality of a section or compound element always takes precedence over the elements that it contains. Once a section or compound element is recognized by the data set producer as applicable, then the optionality of its subordinate elements is to be interpreted. See Production Rules section for additional interpretive guidance. ordinate -- the coordinate of a point in a plane cartesian coordinate system obtained by measuring parallel to the y-axis ("the 'y' value"). parent -- the name of the data element under which a given data element may occur. A parent element may be an extended or a standard element. phenomenon -- a fact, occurrence or circumstance. Route 10, George Washington National Forest, and Chesterfield County are all phenomena. pixel -- two-dimensional picture element that is the smallest nondivisible element of a digital image. planar graph -- the node and link or chain objects of the graph occur or can be represented as though they occur upon a planar surface. Not more than one node may exist at any given point on the surface. Links or chains may only intersect at nodes. point -- a zero-dimensional object that specifies geometric location. One coordinate pair or triplet specifies the location. Area point, entity point, and label point are special implementations of the general case. primitive -- the quality of not being subdivided; atomic. quality -- an essential or distinguishing characteristic necessary for cartographic data to be fit for use. raster -- one or more overlapping layers for the same grid or digital image. raster object - one or more images and/or grids, each grid or image representing a layer, such that corresponding grid cells and/or pixels between layers are congruent and registered. rationale - a component of an extended element. The rationale is provided by the user creating the extended element to explain the reason for its creation and its expected uses.
65
FGDC-STD-001-1998
repeatability --whether or not an extended element can be repeated and optionally a minimum or maximum number of occurrences or both resolution-- the minimum difference between two independently measured or computed values which can be di stinguished by the measurement or analytical method being considered or used. ring -- sequence of nonintersecting chains or strings and (or) arcs, with closure. A ring represents a closed boundary, but not the interior area inside the closed boundary. SDTS -- the Spatial Data Transfer Standard defined by Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information Processing Standard 173): Washington, Department of Commerce, National Institute of Standards and Technology. short name -- a unique name for each compound or primitive data element consisting of eight alphabetic characters or less. When creating extended element short names, do not duplicate an existing standard element short name. source --a component of an extended element. the name of the individual or organization creating an extended element spatial data -- see geospatial data. stratum -- one of a series of layers, levels, or gradations in an ordered system. For this standard, the term is used in the sense of (1) a region of sea, atmosphere, or geology that is distinguished by natural or arbitrary limits; (2) a socioeconomic level of society comprised of persons of the same or similar status, especially with regard to education or culture; or (3) a layer of vegetation, usually of the same or similar height. string -- a connected non-branching sequence of line segments specified as the ordered sequence of points between those line segments. Note: A string may intersect itself or other strings.
two-dimensional manifold -- a planar graph and its associated two dimensional objects. Each chain bounds two and only two, not necessarily distinct, GT-polygons. The GT-polygons are mutually exclusive and completely exhaust the surface. type -- in the definition of the elements in the metadata standard, a compound element has the type "compound" to provide a unique way to identify compound elements. For a data element, the type identifies the kind of value that can be assigned to the data element. The choices are "integer" for integer numbers, "real" for real numbers, "text" for ASCII characters, "date" for day of the year, and "time" for time of the day. universe polygon -- defines the part of the universe that is outside the perimeter of the area covered by other GT-polygons ("covered area") and completes the two-dimensional manifold. This polygon completes the adjacency relationships of the perimeter links. The boundary of the universe polygon is represented by one or more inner rings and no outer ring. Attribution of the universe polygon may not exist, or may be substantially different from the attribution of the covered area. vector -- composed of directed lines.
66
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix A, Glossary vertical -- at right angles to the horizontal; includes altitude and depth.
FGDC-STD-001-1998
VPF -- the Vector Product Format defined by Department of Defense, 1992, Vector Product Format (MILSTD-600006): Philadelphia, Department of Defense, Defense Printing Service Detachment Office. void polygon -- defines a part of the two-dimensional manifold that is bounded by other GT-polygons, but otherwise has the same characteristics as the universe polygon. The geometry and topology of a void polygon are those of a GT-polygon. Attribution of a void polygon may not exist, or may be substantially different from the attribution of the covered area. voxel -- a three-dimensional element that is the smallest nondivisible element of a digital volume.
67
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix B, Alphabetical List of Compound Elements and Data Elements
FGDC-STD-001-1998
Appendix B Alphabetical List of Compound Elements and Data Elements Citation Information, 53 Abscissa Resolution, 32 City, 59 Abstract, 4 Cloud Cover, 15 Access Constraints, 7 Codeset Domain, 39 Access Instructions, 47 Codeset Name, 40 Address, 59 Codeset Source, 40 Address Type, 59 Column Count, 18 Albers Conical Equal Area, 25 Compatibility Information, 48 Altitude Datum Name, 35 Completeness Report, 12 Altitude Distance Units, 35 Compression Support, 47 Altitude Encoding Method, 35 Computer Contact Information, 46 Altitude Resolution, 35 Contact Address, 59 Altitude System Definition, 34 Contact Electronic Mail Address, 60 ARC Coordinate System, 31 Contact Facsimile Telephone, 60 ARC System Zone Identifier, 31 Contact Information, 58 Attribute, 38 Contact Instructions, 60 Attribute Accuracy, 11 Contact Organization, 58 Attribute Accuracy Explanation, 11 Contact Organization Primary, 59 Attribute Accuracy Report, 11 Contact Person, 58 Attribute Accuracy Value, 11 Contact Person Primary, 58 Attribute Definition, 38 Contact Position, 59 Attribute Definition Source, 39 Contact TDD/TTY Telephone, 60 Attribute Domain Values, 39 Contact Voice Telephone, 59 Attribute Label, 38 Coordinate Representation, 32 Attribute Measurement Frequency, 41 Country, 59 Attribute Measurement Resolution, 40 Cross Reference, 9 Attribute Units of Measure, 40 Currentness Reference, 4 Attribute Value Accuracy, 40 Custom Order Process, 49 Attribute Value Accuracy Explanation, 41 Data Quality Information, 10 Attribute Value Accuracy Information, 40 Data Set Credit, 8 Available Time Period, 49 Data Set G-Polygon, 5 Azimuth Measure Point Longitude, 29 Data Set G-Polygon Outer G-Ring, 5 Azimuthal Angle, 28 Denominator of Flattening Ratio, 34 Azimuthal Equidistant, 25 Depth Datum Name, 35 Bearing Reference Direction, 33 Depth Distance Units, 36 Bearing Reference Meridian, 33 Depth Encoding Method, 36 Bearing Resolution, 33 Depth Resolution, 36 Bearing Units, 33 Depth System Definition, 35 Beginning Date, 56 Description, 4 Beginning Date of Attribute Values, 40 Detailed Description, 38 Beginning Time, 57 Dialup File Name, 47 Bounding Coordinates, 5 Dialup Instructions, 46 Browse Graphic, 8 Dialup Telephone, 47 Browse Graphic File Description, 8 Digital Form, 44 Browse Graphic File Type, 8 Digital Transfer Information, 44 Calendar Date, 56 Digital Transfer Option, 46 Citation, 4 Direct Spatial Reference Method, 16
68
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix B, Alphabetical List of Compound Elements and Data Elements Distance and Bearing Representation, 33 Distance Resolution, 33 Distribution Information, 42 Distribution Liability, 43 Distributor, 43 East Bounding Coordinate, 5 Edition, 54 Ellipsoid Name, 34 Ending Date, 57 Ending Date of Attribute Values, 40 Ending Time, 57 Entity and Attribute Detail Citation, 41 Entity and Attribute Information, 37 Entity and Attribute Overview, 41 Entity Type, 38 Entity Type Definition, 38 Entity Type Definition Source, 38 Entity Type Label, 38 Enumerated Domain, 39 Enumerated Domain Value, 39 Enumerated Domain Value Definition, 39 Enumerated Domain Value Definition Source, 39 Equidistant Conic, 25 Equirectangular, 25 False Easting, 27 False Northing, 27 Fees , 48 File Decompression Technique, 45 Format Information Content, 45 Format Name, 44 Format Specification, 45 Format Version Date, 45 Format Version Number, 45 G-Ring, 6 G-Ring Latitude, 6 G-Ring Longitude, 6 G-Ring Point, 5 General Vertical Near-sided Perspective, 25 Geodetic Model, 34 Geographic, 24 Geographic Coordinate Units, 24 Geospatial Data Presentation Form, 54 Gnomonic, 25 Grid Coordinate System, 30 Grid Coordinate System Name, 30 Height of Perspective Point Above Surface, 28 Highest BPS, 46 Horizontal Coordinate System Definition, 24
FGDC-STD-001-1998
Horizontal Datum Name, 34 Horizontal Positional Accuracy, 12 Horizontal Positional Accuracy Explanation, 12 Horizontal Positional Accuracy Report, 12 Horizontal Positional Accuracy Value, 12 Hours of Service, 60 Identification Information, 2 Indirect Spatial Reference, 16 Issue Identification, 54 Keywords, 6 Lambert Azimuthal Equal Area, 25 Lambert Conformal Conic, 26 Landsat Number, 29 Larger Work Citation, 55 Latitude of Projection Center, 28 Latitude of Projection Origin, 27 Latitude Resolution, 24 Lineage, 13 Local, 33 Local Description, 34 Local Georeference Information, 34 Local Planar, 32 Local Planar Description, 32 Local Planar Georeference Information, 32 Logical Consistency Report, 12 Longitude of Central Meridian, 27 Longitude of Projection Center, 28 Longitude Resolution, 24 Lowest BPS, 46 Map Projection, 25 Map Projection Name, 25 Map Projection Parameters, 27 Mercator, 26 Metadata, 1 Metadata Access Constraints, 51 Metadata Contact, 50 Metadata Date, 50 Metadata Extensions, 52 Metadata Future Review Date, 50 Metadata Reference Information, 50 Metadata Review Date, 50 Metadata Security Classification, 51 Metadata Security Classification System, 51 Metadata Security Handling Description, 52 Metadata Security Information, 51 Metadata Standard Name, 51 Metadata Standard Version, 51 Metadata Time Convention, 51 Metadata Use Constraints, 51
69
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix B, Alphabetical List of Compound Elements and Data Elements Miller Cylindrical, 26 Modified Stereographic for Alaska, 26 Multiple Dates/Times, 56 Native Data Set Environment, 9 Network Address, 46 Network Resource Name, 46 Non-digital Form, 43 North Bounding Coordinate, 5 Number DataBits, 46 Number StopBits, 47 Oblique Line Azimuth, 28 Oblique Line Latitude, 29 Oblique Line Longitude, 29 Oblique Line Point, 29 Oblique Mercator, 26 Offline Media, 47 Offline Option, 47 Online Computer and Operating System, 47 Online Linkage, 52, 55 Online Option, 46 Ordering Instructions, 48 Ordinate Resolution, 32 Originator, 53 Orthographic, 26 Other Citation Details, 54 Other Grid System's Definition, 31 Other Projections Definition, 30 Overview Description, 41 Parity, 47 Path Number, 29 Place, 6 Place Keyword, 7 Place Keyword Thesaurus, 7 Planar, 24 Planar Coordinate Encoding Method, 32 Planar Coordinate Information, 32 Planar Distance Units, 33 Point and Vector Object Count, 17 Point and Vector Object Information, 16 Point of Contact , 8 Polar Stereographic, 26 Polyconic, 26 Positional Accuracy, 12 Postal Code, 59 Process Contact, 15 Process Date, 14 Process Description, 14 Process Step, 14 Process Time, 15
FGDC-STD-001-1998
Profile Name, 52 Progress, 4 Publication Date, 53 Publication Information, 54 Publication Place, 54 Publication Time, 53 Publisher, 54 Purpose, 4 Quantitative Attribute Accuracy Assessment, 11 Quantitative Horizontal Positional Accuracy Assessment, 12 Quantitative Vertical Positional Accuracy Assessment, 13 Range Domain, 39 Range Domain Maximum, 39 Range Domain Minimum, 39 Range of Dates/Times, 56 Raster Object Information, 18 Raster Object Type, 18 Recording Capacity, 48 Recording Density, 48 Recording Density Units, 48 Recording Format, 48 Resource Description, 43 Robinson, 26 Row Count , 18 Scale Factor at Center Line, 28 Scale Factor at Central Meridian, 30 Scale Factor at Equator, 28 Scale Factor at Projection Origin, 29 SDTS Point and Vector Object Type, 17 SDTS Terms Description, 17 Security Classification System, 9 Security Handling Description, 9 Security Information, 9 Semi-major Axis, 34 Series Information, 54 Series Name, 54 Single Date/Time, 56 Sinusoidal, 26 Source Citation, 13 Source Citation Abbreviation, 14 Source Contribution, 14 Source Currentness Reference, 14 Source Information, 13 Source Produced Citation Abbreviation, 15 Source Scale Denominator, 13 Source Time Period of Content, 14 Source Used Citation Abbreviation, 14
70
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix B, Alphabetical List of Compound Elements and Data Elements South Bounding Coordinate, 5 Space Oblique Mercator (Landsat), 26 Spatial Data Organization Information, 16 Spatial Domain, 5 Spatial Reference Information, 19 SPCS Zone Identifier, 31 Standard Order Process, 43 Standard Parallel, 27 State or Province, 59 State Plane Coordinate System (SPCS), 31 Status, 4 Stereographic, 27 Straight Vertical Longitude from Pole, 29 Stratum, 7 Stratum Keyword, 7 Stratum Keyword Thesaurus, 7 Supplemental Information, 4 Technical Prerequisites, 49 Temporal, 7 Temporal Keyword, 7 Temporal Keyword Thesaurus, 7 Theme, 6 Theme Keyword, 6 Theme Keyword Thesaurus, 6 Time of Day, 56 Time Period Information, 56 Time Period of Content, 4 Title, 53 Transfer Size, 45 Transverse Mercator, 27 Turnaround, 48 Type of Source Media, 13 Universal Polar Stereographic (UPS), 31 Universal Transverse Mercator (UTM), 30 Unrepresentable Domain, 40 UPS Zone Identifier, 31 Use Constraints, 8 UTM Zone Number, 30 van der Grinten, 27 Vertical Coordinate System Definition, 34 Vertical Count, 18 Vertical Positional Accuracy, 13 Vertical Positional Accuracy Explanation, 13 Vertical Positional Accuracy Report, 13 Vertical Positional Accuracy Value, 13 VPF Point and Vector Object Type, 18 VPF Terms Description, 17 VPF Topology Level, 17 VPF_Point_and_Vector_Object_Information, 18
FGDC-STD-001-1998
West Bounding Coordinate, 5
71
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix C, References
FGDC-STD-001-1998
Appendix C References American Congress on Surveying and Mapping and American Society of Civil Engineering, 1978, Definitions of surveying and associated terms: Falls Church, Virginia, American Congress on Surveying and Mapping. American National Standards Institute, 1975, Representations of universal time, local time differentials, and United States time zone reference for information interchange (ANSI X3.51-1975): New York, American National Standards Institute. American National Standards Institute, 1986, Representation for calendar date and ordinal date for information interchange (ANSI X3.30-1985): New York, American National Standards Institute. American National Standards Institute, 1986, Representations of local time of day for information interchange (ANSI X3.43-1986): New York, American National Standards Institute. American National Standards Institute, 1986, Representations of Geographic Point Locations for Information Interchange (ANSI X3.61-1986): New York, American National Standards Institute. American National Standards Institute, 1990, Dictionary for information systems (ANSI X3.172-1990): New York, American National Standards Institute. Anglo-American Committee on Cataloguing of Cartographic Materials, 1982, Cartographic materials: A manual of interpretation for AACR2: Chicago, American Library Association. ASTM Section D18.01.05, various dates, Spatial metadata Content Standard for geographic information systems, catalogs, and data exchange (drafts). Clark, Suzanne, Larsgaard, Mary, and Teague, Cynthia, 1992, Cartographic citations: A style guide: Chicago, American Library Association, Map and Geography Roundtable. Cogan, Christopher, and Edwards, Thomas, Jr., 1994 (February), Metadata standards for Gap analysis: Moscow, Idaho, Idaho Cooperative Fish and Wildlife Research Unit, University of Idaho. Department of Commerce, 1975, Tide and Current Glossary, Special Publication 228: Washington, Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Survey. Department of Commerce, 1989 (January), State Plane Coordinate System of 1983 (National Oceanic and Atmospheric Administration Manual NOS NGS 5): Silver Spring, Maryland, Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Service, Coast and Geodetic Survey. Department of Commerce, 1992, Spatial Data Transfer Standard (SDTS) (Federal Information Processing Standard 173): Washington, Department of Commerce, National Institute of Standards and Technology. Department of Defense, 1981, Glossary of mapping, charting, and geodetic terms (4th ed.): Washington, Department of Defense, National Imagery and Mapping Agency.
72
Federal Geographic Data Committee Content Standard for Digital Geospatial Metadata Appendix C, References
FGDC-STD-001-1998
Department of Defense, 1990, Military specification ARC Digitized Raster Graphics (ADRG) (MIL-A-89007): Philadelphia, Department of Defense, Defense Printing Service Detachment Office. Department of Defense, 1992, Vector Product Format (MIL-STD-600006): Philadelphia, Department of Defense, Defense Printing Service Detachment Office. Dodd, Susan, 1982, Cataloging machine-readable files. Chicago, American Library Association. Hansen, Wallace, 1991, Suggestions to authors of the reports of the United States Geological Survey (7th ed.): Washington, U.S. Government Printing Office. Li, Xia, and Crane, Nancy, 1993, Electronic style: A guide to citing electronic information: Westport, Connecticut, Meckler Publishing. Network Development and MARC Standards Office, 1988, USMARC format for bibliographic data: Washington, Library of Congress, Cataloging Distribution Service. Network Development and MARC Standards Office, 1988, USMARC code list for relators, sources, and description conventions: Washington, Library of Congress, Cataloging Distribution Service. (no author), 1994, The Government Information Locator Service (GILS): Report to the Information Infrastructure Task Force (May 2, 1994). Patrias, Karen, 1991 (April), National Library of Medicine recommended formats for bibliographic citations: Bethesda, Maryland, U.S. Department of Health and Human Services, Public Health Service, National Institutes of Health, National Library of Medicine. Snyder, John, 1987, Map projections: A working manual (U.S. Geological Survey Professional Paper 1395): Washington, U.S. Government Printing Office. Westbrook, J. H., and Grattidge, W., 1991, A glossary of terms relating to data, data capture, data manipulation, and data bases: CODATA Bulletin, v. 23, no. 1-2.
73
Federal Geographic Data Committee FGDC-STD-001-1998 Content Standard for Digital Geospatial Metadata Appendix D, Guidelines for Creating Extended Elements in the Content Standard for Digital Geospatial Metadata Appendix D Guidelines for Creating Extended Elements in the Content Standard for Digital Geospatial Metadata Extended elements to the Standard may be defined by a data set producer or a user community. Extended elements are elements outside the Standard, but needed by the data set producer. If extended elements are created, they must follow the guidelines presented here. The Online_Linkage data element within Metadata_Extensions points to a formal document containing the necessary documentation for a subsequent metadata producer to reuse the extended element. If extended elements are used in a profile, the Profile_Name can also be included in the Metadata_Extensions compound data element. See Appendix E for Guidelines on Creating a Profile for the Content Standard for Digital Geospatial Metadata. It should be noted here that metadata capture and exploitation tools need to be updated to adjust to these minor modifications. At the end of Section 7, Metadata Reference Information, the following elements were added in order to handle extended elements: Extended elements may also be created for use with non-geospatial data holdings when this practice does not conflict with other Federal standards, directives, or statutes. Metadata_Extensions= 0{Online_Linkage}n + 0{Profile_Name}1 If a metadata producer does not have the capability to provide online linkage, he or she may list the information in the data set. The Online Linkage element references a structured file (or uniform resource locator) containing the following information about the extended element in the production rule dictated below: name, data type, domain values, short name, parent element, optionality (Mandatory, Mandatory-if-applicable, or Optional), cardinality, for example, (0, 1, ..., n) or ( > 1 but < 10), repeatability, definition, rationale, and source. The compound element Extension_Information is repeatable, but the primitive data elements occurring in Extension_Information are not. Note that these elements do not appear in the metadata record itself. Extension_Information = Name + Short_Name + Type + [Domain | [0{Child}n | Rule]] + 1{Parent}n + (Optionality) + (Repeatability) + (Definition) + (Rationale) + (Source) The following rules must be followed when defining extended elements:
74
Federal Geographic Data Committee FGDC-STD-001-1998 Content Standard for Digital Geospatial Metadata Appendix D, Guidelines for Creating Extended Elements in the Content Standard for Digital Geospatial Metadata C Extended elements must be formally documented within the hierarchical structure of the Standard (Section 0 - Metadata). When metadata extended elements are used, their existence must be documented in the Metadata Reference Information, element Metadata_Extensions. Every effort should be made to logically organize extended elements within the existing sections and structure. Where there is no logical or natural fit, new section(s) and/or subsections may be defined. Extended elements must not be used to change the name, definition, type, or domain of a standard element. In particular, an extended element cannot be nested under a data element. Extended elements may be defined as compound and may include extended and standard elements as components. If a standard element is included in an extended compound element, no components of the standard element are changed. Extended elements, like the standard element Single_Date/Time may appear in multiple places in the metadata set. Extended_Element_Name -- (Mandatory) -- the name of the element. The name given to the element must not be the name of any other element in the Standard. Domain: free text (Do not duplicate any other Standard element name.) Definition -- (Mandatory) -- the definition of the element. Domain: free text Rationale -- (Optional) -- the reason for creating the Extended element, and its expected uses. Domain: free text Source -- (Mandatory) -- the name of the entity creating the Extended element. Domain: free text Type -- (Mandatory) -- the kind of value to be provided, or compound if the Extended element contains other elements. Domain: integer, real, text, date, time, compound Domain -- (Mandatory) -- valid values that can be assigned to the data element. The same rules as those for Standard elements are applied here. Domain: free text Short Name -- (Mandatory) -- a unique short name consisting of eight alphabetic characters or less. Domain: free text (Do not duplicate another short name used by the Standard or any other short name in the Extension Registry.) Parent -- (Mandatory) -- The name of the element(s) under which this element may appear. The name(s) may be standard or other extended element(s). Domain: none, free text (Must be the name of an existing standard or extended element. If the extended element is not part of any other compound element, its
C C
75
Federal Geographic Data Committee FGDC-STD-001-1998 Content Standard for Digital Geospatial Metadata Appendix D, Guidelines for Creating Extended Elements in the Content Standard for Digital Geospatial Metadata parent is the section name as defined by the Standard. If the extended element is defining a whole new section, then its parent is Section 0 - Metadata.) Child -- (Mandatory-if-applicable) -- The name of the element(s) which may appear under this element. The name(s) may be standard or other extended element(s). Domain: none, free text (Must be the name of an existing Standard or extended element.) Rule: production rule for the element, specified using the form given in this Standard.
76
Federal Geographic Data Committee FGDC-STD-001-1998 Content Standard for Digital Geospatial Metadata Appendix E, Guidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata Appendix E Guidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata The current Content Standard for Digital Geospatial Metadata provides metadata collectors with formally defined elements known as standard elements. The metadata Standard attempts to standardize the content of metadata elements for a wide range of digital geospatial data. However, some users may determine that modifications to the Standard are needed to create meaningful metadata for their data sets. The Standard allows the user to create extended elements and profiles. Extended elements are user-defined elements outside the Standard needed by the metadata producer. A profile is a document that describes the application of the Standard to a specific user community. A profile always contains the Standard, plus modifications to the optionality or repeatability of nonmandatory elements in the Standard. Modifications to the domains of standard elements can also be made where permitted by the Standard. Profiles may also contain extended elements. Profiles may be formalized through the FGDC standards process or may be used informally by a user community. FGDC is the approval authority for profiles. To become recognized by the FGDC, a metadata profile must go through the FGDC standards review and approval process. FGDC approved profiles must specify a maintenance authority. While the FGDC is the designated maintenance authority for the Metadata Standard the organization or agency sponsoring a profile will be considered the maintenance authority for that profile. Profiles may also be created for use with non-geospatial data holdings when this practice does not conflict with other Federal standards, directives, or statutes. Requirements A profile must include: C C C C C the basic, minimum set of metadata collected to the specification of this Standard all mandatory elements in all mandatory sections. These are known as the core metadata elements all mandatory- if-applicable elements in all mandatory sections, if the data set has the characteristic documented in the element all mandatory elements in all mandatory-if-applicable sections if the data set has the characteristic documented in the section all mandatory-if-applicable elements in all mandatory-if-applicable sections, if the data set has the characteristic documented in the section
Guidelines The guidelines for creating a profile follow: C C A profile must not change the name, definition, or data type of a standard element. A profile may impose more stringent conditionality on standard elements than the Standard requires. (Elements that are optional in the Standard may be mandatory in a profile.) 77
Federal Geographic Data Committee FGDC-STD-001-1998 Content Standard for Digital Geospatial Metadata Appendix E, Guidelines for Creating a Profile for the Content Standard for Digital Geospatial Metadata C A profile may contain elements with domains that are more restrictive than the Standard. (Elements whose domains have free text in the Standard may have a closed list of appropriate values in the profile.) A profile may restrict the use of domain values allowed by the Standard. For example, if the Standard contains five domain values for a standard element, the profile may specify that its domain consist of three domain values identified in the profile. The profile may require that the user select a value from the three domain values.) A profile will not permit anything not allowed by the Standard. (If the Standard element has a domain of three values, without a free text element, the profile will not allow a user to enter anything other than those 3 values.) Before creating a profile, the metadata producer will check existing registered profiles. A profile must be made available to anyone receiving metadata that was collected according to that profile. The profile document submitted to the FGDC for formal approval shall contain the same six sections as the introduction section of this Standard. The format of a profile document shall meet the directives of the FGDC Standards Working Group and shall consist of the following: 1. 2. 3. 4. 5. 6. 7. 8. Objectives Scope Applicability Related Standards Standards Development Process Maintenance Authority A section stating that the mandatory elements from the Standard must be provided. A section describing the changes to the domains and conditionality of Standard elements being modified from their original use in the Standard. These changes should be presented in the same manner used by the Standard. A section describing the extended elements created under this profile. This section must include all of the components of an extended element described in the Standard.
C C C
9.
78
DAFTARPULAUDIKEPULAUANSERIBU
1. Pulau Belanda 2. Pulau Bira Besar 3. Pulau Bira Kecil 4. Pulau Bulat 5. Pulau Bundar 6. Pulau Cina 7. Pulau Dua Barat 8. Pulau Dua Timur 9. Pulau Genteng Besar 10. Pulau Genteng Kecil 11. Pulau Gosong Pabelokan 12. Pulau Gosong Rengat 13. Pulau Hantu Barat/Antuk Barat 14. Pulau Hantu Timur/Antuk Timur 15. Pulau Harapan 16. Pulau Jagung 17. Pulau Jukung 18. Pulau Kaliage Besar 19. Pulau Kaliage Kecil 20. Pulau Kelor Timur 21. Pulau Kayu Angin Bira 22. Pulau Kayu Angin Genteng 23. Pulau Kayu Angin Melintang 24. Pulau Kayu Angin Putri 25. Pulau Kelapa 26. Pulau Kelor Barat 27. Pulau Kungsi/Kelapa Dua 28. Pulau Kuburan Cina 29. Pulau Laga 30. Pulau Lipan 31. Pulau Macan Besar/Matahari 32. Pulau Macan Kecil 33. Pulau Melinjo 34. Pulau Melintang Besar 35. Pulau Melintang Kecil 36. Pulau Nyamplung 37. Pulau Opak Besar Barat 38. Pulau Opak Besar Timur 39. Pulau Pabelokan 40. Pulau Panjang Besar 41. Pulau Panjang Kecil 42. Pulau Pemagaran 43. Pulau Penyaliran Barat 44. Pulau Penyaliran Timur 45. Pulau Perak
46. Pulau Patetoran Barat/Besar 47. Pulau Patetotan Timur/Kecil 48. Pulau Putri Barat/Besar 49. Pulau Putri Gundul 50. Pulau Putri Timur/Kecil 51. Pulau Rengit 52. Pulau Saktu 53. Pulau Sebaru Besar 54. Pulau Sebaru Kecil 55. Pulau Sebira 56. Pulau Semut 57. Pulau Semut Kecil 58. Pulau Semut Besar 59. Pulau Sepa Besar/Barat 60. Pulau Sepa Kecil 61. Pulau Petondan Besar/Pelangi 62. Pulau Petondan Kecil/Timur 63. Pulau Tongkeng 64. Pulau Yu Besar/Yu Barat 65. Pulau Yu Kecil/Yu Timur 66. Pulau Ayer 67. Pulau Karang Beras 68. Pulau Karang Congkak 69. Pulau Karang Bongkok 70. Pulau Karya 71. Pulau Kotok Besar Barat 72. Pulau Kotok Kecil 73. Pulau Opak Kecil 74. Pulau Panggang 75. Pulau Paniki 76. Pulau Pramuka 77. Pulau Sekati 78. Pulau Semak Daun 79. Pulau Air Besar 80. Pulau Air Kecil/Jusi 81. Pulau Bidadari 82. Pulau Bokor 83. Pulau Cipir 84. Pulau Damar Besar 85. Pulau Damar Kecil/Wanara 86. Pulau Dapur 87. Pulau Kelor Nesar 88. Nirwana (Nyamuk Besar) 89. Pulau Nyamuk Kecil/Talak 90. Pulau Onrust 91. Pulau Rambut
92. Pulau Ubi Besar 93. Pulau Ubi Kecil 94. Pulau Untung Jawa 95. Pulau Burung 96. Pulau Kalang Kudus 97. Pulau Kongsi 98. Pulau Lancang Kecil 99. Pulau Laki 100. Pulau Tengah 101. Pulau Tidung Kecil 102. Pulau Pari 103. Pulau Biawak 104. Pulau Tikus 105. Pulau Gudus Lempeng 106. Pulau Payung Kecil 107. Pulau Gundul 108. Pulau Lancang Besar 109. Pulau Payung Besar 110. Pulau Tidung Besar
MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Propinsi Kabupaten/Kota : : [31] [01] DKI JAKARTA KEPULAUAN SERIBU K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 010 KEPULAUAN SERIBU SELATAN 001 002 PULAU TIDUNG PULAU PARI
1 1 1 1 1 1
003 PULAU UNTUNG JAWA 020 KEPULAUAN SERIBU UTARA 001 002 003 PULAU PANGGANG PULAU KELAPA PULAU HARAPAN
Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural
435

Propinsi Kabupaten/Kota : : [31] [71] DKI JAKARTA JAKARTA SELATAN K/P KECAMATAN DESA / KELURAHAN 050 KEBAYORAN LAMA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 005 GROGOL SELATAN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 006 GROGOL UTARA 060 KEBAYORAN BARU 001 002 003 004 005 006 007 008 009 GANDARIA UTARA CIPETE UTARA PULO PETOGOGAN MELAWAI KRAMAT PELA GUNUNG SELONG RAWA BARAT K/P
KECAMATAN DESA / KELURAHAN 010 JAGAKARSA 001 002 003 004 005 CIPEDAK SRENGSENG SAWAH CIGANJUR JAGAKARSA LENTENG AGUNG
006 TANJUNG BARAT 020 PASAR MINGGU 001 002 003 004 005 006 CILANDAK TIMUR RAGUNAN KEBAGUSAN PASAR MINGGU JATI PADANG PEJATEN BARAT
007 PEJATEN TIMUR 030 CILANDAK 001 002 003 004 LEBAK BULUS PONDOK LABU CILANDAK BARAT GANDARIA SELATAN
010 SENAYAN 070 MAMPANG PRAPATAN 001 002 003 004 BANGKA PELA MAMPANG TEGAL PARANG MAMPANG PRAPATAN
005 CIPETE SELATAN 040 PESANGGRAHAN 001 002 003 004 BINTARO PESANGGRAHAN ULUJAMI PETUKANGAN SELATAN
005 KUNINGAN BARAT 080 PANCORAN 001 002 003 004 005 KALIBATA RAWAJATI DUREN TIGA PANCORAN PENGADEGAN
005 PETUKANGAN UTARA 050 KEBAYORAN LAMA 001 002 003 004 PONDOK PINANG KEBAYORAN LAMA SELATAN KEBAYORAN LAMA UTARA CIPULIR
006 CIKOKO 090 TEBET 001 002 003 004 MENTENG DALAM TEBET BARAT TEBET TIMUR KEBON BARU
436

Propinsi Kabupaten/Kota : : [31] [71] DKI JAKARTA JAKARTA SELATAN K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 090 TEBET 005 006 BUKIT DURI MANGGARAI SELATAN
1 1 1 1 1 1 1 1 1 1 1
007 MANGGARAI 100 SETIA BUDI 001 002 003 004 005 006 007 008 KARET SEMANGGI KUNINGAN TIMUR KARET KUNINGAN KARET MENTENG ATAS PASAR MANGGIS GUNTUR SETIA BUDI
437

Propinsi Kabupaten/Kota : : [31] [72] DKI JAKARTA JAKARTA TIMUR K/P KECAMATAN DESA / KELURAHAN 050 KRAMAT JATI 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 005 006 KRAMAT JATI CILILITAN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 PASAR REBO 001 002 003 004 PEKAYON KALISARI BARU CIJANTUNG
007 CAWANG 060 JATINEGARA 001 002 003 004 005 006 007 BIDARA CINA CIPINANG CEMPEDAK CIPINANG BESAR SELATAN CIPINANG MUARA CIPINANG BESAR UTARA RAWA BUNGA BALI MESTER
005 GEDONG 020 CIRACAS 001 002 003 004 CIBUBUR KELAPA DUA WETAN CIRACAS SUSUKAN
005 RAMBUTAN 030 CIPAYUNG 001 002 003 004 005 006 007 PONDOK RANGGON CILANGKAP MUNJUL CIPAYUNG SETU BAMBU APUS CEGER
008 KAMPUNG MELAYU 070 DUREN SAWIT 001 002 003 004 005 006 PONDOK BAMBU DUREN SAWIT PONDOK KELAPA PONDOK KOPI MALAKA JAYA MALAKA SARI
008 LUBANG BUAYA 040 MAKASAR 001 002 003 004 PINANG RANTI MAKASAR KEBON PALA HALIM PERDANA KUSUMAH
007 KLENDER 080 CAKUNG 001 002 003 004 005 006 JATINEGARA PENGGILINGAN PULO GEBANG UJUNG MENTENG CAKUNG TIMUR CAKUNG BARAT
005 CIPINANG MELAYU 050 KRAMAT JATI 001 002 003 004 BALE KAMBANG BATU AMPAR KAMPUNG TENGAH DUKUH
007 RAWA TERATE 090 PULO GADUNG 001 002 PISANGAN TIMUR CIPINANG
438

Propinsi Kabupaten/Kota : : [31] [72] DKI JAKARTA JAKARTA TIMUR K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 090 PULO GADUNG 003 004 005 006 JATINEGARA KAUM JATI RAWAMANGUN KAYU PUTIH
1 1 1 1 1 1 1 1 1 1 1
007 PULO GADUNG 100 MATRAMAN 001 002 003 004 005 006 KEBON MANGGIS PAL MERIEM PISANGAN BARU KAYU MANIS UTAN KAYU SELATAN UTAN KAYU UTARA
439

Propinsi Kabupaten/Kota : : [31] [73] DKI JAKARTA JAKARTA PUSAT K/P KECAMATAN DESA / KELURAHAN 060 KEMAYORAN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 003 004 005 006 007 SUMUR BATU SERDANG UTAN PANJANG KEBON KOSONG KEMAYORAN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 TANAH ABANG 001 002 003 004 005 006 GELORA BENDUNGAN HILIR KARET TENGSIN KEBON MELATI PETAMBURAN KEBON KACANG
007 KAMPUNG BALI 020 MENTENG 001 002 003 004 MENTENG PEGANGSAAN CIKINI GONDANGDIA
008 GUNUNG SAHARI SELATAN 070 SAWAH BESAR 001 002 003 004 PASAR BARU GUNUNG SAHARI UTARA KARTINI KARANG ANYAR
005 KEBON SIRIH 030 SENEN 001 002 003 004 005 KENARI PASEBAN KRAMAT KWITANG SENEN
005 MANGGA DUA SELATAN 080 GAMBIR 001 002 003 004 005 006 CIDENG PETOJO SELATAN GAMBIR KEBON KELAPA PETOJO UTARA DURI PULO
006 BUNGUR 040 JOHAR BARU 001 002 003 JOHAR BARU KAMPUNG RAWA TANAH TINGGI
004 GALUR 050 CEMPAKA PUTIH 001 002 RAWA SARI CEMPAKA PUTIH TIMUR
003 CEMPAKA PUTIH BARAT 060 KEMAYORAN 001 002 HARAPAN MULYA CEMPAKA BARU
440

Propinsi Kabupaten/Kota : : [31] [74] DKI JAKARTA JAKARTA BARAT K/P KECAMATAN DESA / KELURAHAN 050 TAMBORA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 002 003 004 005 006 007 008 009 010 DURI SELATAN TANAH SERAL DURI UTARA KREDANG JEMBATAN BESI ANGKE JEMBATAN LIMA TAMBORA ROA MALAKA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 KEMBANGAN 001 002 003 004 005 JOGLO SRENGSENG MERUYA SELATAN MERUYA UTARA KEMBANGAN SELATAN
006 KEMBANGAN UTARA 020 KEBON JERUK 001 002 003 004 005 006 SUKABUMI SELATAN SUKABUMI UTARA KELAPA DUA KEBON JERUK DURI KEPA KEDOYA SELATAN
011 PEKOJAN 060 TAMAN SARI 001 002 003 004 005 006 007 KRUKUT MAPHAR TAMAN SARI TANGKI MANGGA BESAR KEAGUNGAN GLODOK
007 KEDOYA UTARA 030 PALMERAH 001 002 003 004 005 PALMERAH SLIPI KEMANGGISAN KOTA BAMBU UTARA KOTABAMBU SELATAN
008 PINANGSIA 070 CENGKARENG 001 002 003 004 005 DURI KOSAMBI RAWA BUAYA KEDAUNG KALI ANGKE KAPUK CENGKARENG TIMUR
006 JATI PULO 040 GROGOL PETAMBURAN 001 002 003 004 005 006 TANJUNG DUREN UTARA TANJUNG DUREN SELATAN TOMANG GROGOL JELAMBAR WIJAYA KESUMA
006 CENGKARENG BARAT 080 KALI DERES 001 002 003 004 SEMANAN KALIDERES PEGADUNGAN TEGAL ALUR
007 JELAMBAR BARU 050 TAMBORA 001 KALIANYAR
441

Propinsi Kabupaten/Kota : : [31] [74] DKI JAKARTA JAKARTA BARAT K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 080 KALI DERES 005 KAMAL
442

Propinsi Kabupaten/Kota : : [31] [75] DKI JAKARTA JAKARTA UTARA K/P KECAMATAN DESA / KELURAHAN 060 CILINCING 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 004 005 006 007 CILINCING SEMPER TIMUR SEMPER BARAT KALI BARU 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 PENJARINGAN 001 002 003 004 KAMAL MUARA KAPUK MUARA PEJAGALAN PENJARINGAN
005 PLUIT 020 PADEMANGAN 001 002 PADEMANGAN BARAT PADEMANGAN TIMUR
003 ANCOL 030 TANJUNG PRIOK 001 002 003 004 005 006 SUNTER AGUNG SUNTER JAYA PAPANGO WARAKAS SUNGAI BAMBU KEBON BAWANG
007 TANJUNG PRIUK 040 KOJA 001 002 003 004 005 RAWABADAK SELATAN TUGU SELATAN TUGU UTARA LAGOA RAWABADAK UTARA
006 KOJA 050 KELAPA GADING 001 002 KELAPA GADING BARAT KELAPA GADING TIMUR
003 PEGANGSAAN DUA 060 CILINCING 001 002 003 SUKA PURA ROROTAN MARUNDA
443

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 030 PAMIJAHAN 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 1 1 2 2 2 2 2 2 1 2 2 001 002 003 004 005 006 007 008 009 010 011 012 013 014 CIBUNIAN PURWABAKTI CIASMARA CIASIHAN GUNUNG SARI GUNUNG BUNDER 2 GUNUNG BUNDER 1 CIBENING GUNUNG PICUNG CIBITUNG KULON CIBITUNG WETAN PAMIJAHAN PASAREAN GUNUNG MENYAN 2 2 2 2 1 2 2 1 2 2 2 1 1 1 1 2 2 1 2 1 1 1 1 1 1 1 1 1 2 2 K/P
KECAMATAN DESA / KELURAHAN 010 NANGGUNG 001 002 003 004 005 006 007 008 009 MALASARI BANTAR KARET CISARUA CURUG BITUNG NANGGUNG PANGKAL JAYA SUKALUYU HAMBARO KALONG LIUD
010 PARAKAN MUNCANG 020 LEUWILIANG 001 002 003 004 005 006 007 016 017 018 PURASARI PURASEDA KARYASARI PABANGBON KARACAK BARENGKOK CIBEBER II CIBEBER I LEUWIMEKAR LEUWILIANG
015 CIMAYANG 040 CIBUNGBULANG 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 SITU UDIK SITU ILIR CIBATOK 2 CIARUTEN UDIK CIBATOK 1 SUKAMAJU CEMPLANG GALUGA DUKUH CIMANGGU 2 CIMANGGU 1 GIRIMULYA LEUWEUNG KOLOT CIARUTEN ILIR CIJUJUNG
019 KAREHKEL 021 LEUWISADENG 001 002 003 004 005 006 007 008 WANGUN JAYA SADENGKOLOT LEUWISADENG SIBANTENG BABAKAN SADENG SADENG KALONG II KALONG I
444

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 070 CIOMAS 1 1 2 1 2 1 1 1 1 1 1 1 1 2 2 2 2 1 2 2 2 2 2 1 1 1 1 1 2 009 010 011 012 013 014 015 016 017 018 KOTA BATU MEKARJAYA PARAKAN CIOMAS PAGELARAN SUKAMAKMUR CIAPUS SUKAHARJA PADASUKA CIOMAS RAHAYU 1 1 1 1 1 1 2 2 1 1 1 2 2 2 2 1 2 1 1 1 2 2 2 2 2 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 050 CIAMPEA 004 008 009 010 011 012 013 014 015 016 017 018 CIAMPEA UDIK CINANGKA CIBUNTU CICADAS TEGAL WARU BOJONG JENGKOL CIHIDEUNG UDIK CIHIDEUNG ILIR CIBANTENG BOJONG RANGKAS CIBADAK BENTENG
019 LALADON 071 TAMANSARI 001 002 003 004 005 006 007 SUKAJADI SUKALUYU SUKAJAYA SUKARESMI PASIR EURIH TAMAN SARI SUKAMANTRI
019 CIAMPEA 051 TENJOLAYA 001 002 003 004 005 TAPOS 1 GUNUNG MALANG TAPOS 2 SITU DAUN CIBITUNG TENGAH
006 CINANGNENG 060 DRAMAGA 001 002 003 004 005 006 007 008 009 010 PURWASARI PETIR SUKADAMAI SUKAWENING NEGLASARI SINAR SARI CIHERANG DRAMAGA BABAKAN CIKARAWANG
008 SIRNAGALIH 080 CIJERUK 010 011 012 013 014 015 016 017 WARUNG MENTENG CIJERUK CIPELANG CIBALUNG CIPICUNG TANJUNG SARI TAJUR HALANG PALASARI
018 SUKAHARJA 081 CIGOMBONG 001 TUGU JAYA
445

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 100 CIAWI 1 1 1 1 1 2 2 2 1 2 2 1 1 1 2 2 2 1 1 1 2 2 1 2 1 1 1 1 1 010 011 012 BANJAR WARU CIAWI BENDUNGAN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 2 2 1 1 1 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 081 CIGOMBONG 002 003 004 005 006 007 008 CIGOMBONG WATES JAYA SROGOL CIBURUY CISALADA PASIR JAYA CIBURAYUT
013 PANDANSARI 110 CISARUA 001 002 003 004 005 006 007 008 009 CITEKO CIBEUREUM TUGU SELATAN TUGU UTARA BATU LAYANG CISARUA KOPO LEUWIMALANG JOGJOGAN
009 CIADEG 090 CARINGIN 001 002 003 004 005 006 007 008 009 010 011 PASIR BUNCIR CINAGARA TANGKIL PASIR MUNCANG MUARA JAYA CARINGIN LEMAH DUHUR CIMANDE PANCAWATI CIDERUM CIHERANG PONDOK
010 CILEMBER 120 MEGAMENDUNG 001 002 003 004 005 006 007 008 009 010 SUKARESMI SUKAGALIH KUTA SUKAKARYA SUKAMANAH SUKAMAJU SUKAMAHI GADOG CIPAYUNG DATAR CIPAYUNG GIRANG
012 CIMANDE HILIR 100 CIAWI 001 002 003 004 005 006 007 008 009 CILEUNGSI CITAPEN CIBEDUG BOJONG MURNI JAMBU LUWUK BANJAR SARI BANJAR WANGI BITUNG SARI TELUK PINANG
011 MEGAMENDUNG 130 SUKARAJA 001 002 003 CIBANON GUNUNG GEULIS NAGRAK
446

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 160 CARIU 2 2 1 2 1 1 1 1 1 1 2 2 2 2 2 1 2 1 1 2 2 2 2 2 2 2 2 1 2 011 012 013 014 015 016 017 018 019 KARYA MEKAR BANTAR KUNING CIKUTAMAHI CIBATU TIGA MEKARWANGI TEGAL PANJANG CARIU KUTA MEKAR SUKAJADI 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 130 SUKARAJA 004 005 006 007 008 009 010 011 012 SUKATANI SUKARAJA CIKEAS CADAS NGAMPAR PASIRLAJA CIJUJUNG CIMANDALA PASIR JAMBU CILEBUT TIMUR
013 CILEBUT BARAT 140 BABAKAN MADANG 001 002 003 004 005 006 007 008 CIJAYANTI BOJONG KONENG KARANG TENGAH SUMUR BATU BABAKAN MADANG CITARINGGUL CIPAMBUAN KADUMANGU
020 BABAKAN RADEN 161 TANJUNGSARI 001 002 003 004 005 006 007 008 009 CIBADAK TANJUNG SARI SIRNASARI SIRNARASA BUANAJAYA ANTAJAYA PASIR TANJUNG TANJUNG RASA SUKARASA
009 SENTUL 150 SUKAMAKMUR 001 002 003 004 005 006 007 008 009 010 SUKAWANGI SUKAHARJA WARGAJAYA SIRNAJAYA SUKAMULYA SUKAMAKMUR CIBADAK PABUARAN SUKADAMAI SUKARESMI
010 SELAWANGI 170 JONGGOL 001 002 003 004 005 006 007 008 009 SUKAJAYA SUKANEGARA CIBODAS SINGASARI SINGAJAYA SUKASIRNA BALEKAMBANG BENDUNGAN SIRNAGALIH
447

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 190 GUNUNG PUTRI 1 1 2 2 2 1 1 1 1 2 1 1 1 1 1 1 1 1 2 2 1 1 2 2 1 2 1 1 003 004 005 006 007 008 009 TLAJUNG UDIK BOJONG NANGKA CICADAS WANAHERANG CIKEAS UDIK NAGRAK CIANGSANA 1 1 1 1 1 1 1 1 2 2 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 170 JONGGOL 010 011 012 013 JONGGOL SUKAMAJU SUKAMANAH WENINGGALIH
014 SUKAGALIH 180 CILEUNGSI 010 011 012 013 014 015 016 017 018 019 020 DAYEUH MAMPIR SETU SARI CIPEUCANG JATISARI GANDOANG MEKARSARI CILEUNGSI KIDUL CILEUNGSI LIMUS NUNGGAL PASIR ANGIN
010 BOJONG KULUR 200 CITEUREUP 001 002 003 004 005 006 007 008 009 010 011 012 013 TANGKIL HAMBALANG TAJUR PASIR MUKTI SUKAHATI LEUWINUTUG SANJA KARANG ASEM BARAT KARANG ASEM TIMUR TARIKOLOT GUNUNG SARI CITEUREUP PUSPANEGARA
021 CIPENJO 181 KELAPA NUNGGAL 001 002 003 004 005 006 007 008 LEUWIKARET LULUT BANTAR JATI NAMBO KEMBANG KUNING KELAPA NUNGGAL LIGARMUKTI BOJONG
014 PUSPASARI 210 CIBINONG 001 002 003 004 005 006 007 KARADENAN NANGGEWER NANGGEWER MEKAR CIBINONG PAKANSARI SUKAHATI TENGAH
009 CIKAHURIPAN 190 GUNUNG PUTRI 001 002 KARANGGAN GUNUNG PUTRI
448

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 230 KEMANG 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 2 1 2 2 014 PONDOK UDIK 1 1 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2 2 2 2 2 1 1 1 2 2 2 015 JAMPANG 231 RANCA BUNGUR 001 002 003 004 005 MEKARSARI RANCA BUNGUR PASIR GAOK BANTARJAYA BANTAR SARI K/P
KECAMATAN DESA / KELURAHAN 210 CIBINONG 008 009 010 011 PONDOK RAJEG HARAPAN JAYA PABUARAN CIRIMEKAR
012 CIRIUNG 220 BOJONG GEDE 002 003 004 005 011 012 013 014 CIMANGGIS WARINGIN JAYA KEDUNG WARINGIN BOJONG GEDE SUSUKAN BOJONG BARU RAWA PANJANG PABUARAN
006 CANDALI 240 PARUNG 009 010 011 012 013 014 015 016 IWUL JABON MEKAR PAMAGER SARI PARUNG WARU WARUJAYA BOJONG SEMPU BOJONG INDAH
015 RAGAJAYA 221 TAJURHALANG 001 002 003 004 005 006 TONJONG TAJUR HALANG SUKMAJAYA NANGGERANG SASAK PANJANG KALISUREN
017 COGREG 241 CISEENG 001 002 003 004 005 006 007 008 009 KARIHKIL CIBEUTEUNG UDIK BABAKAN PUTAT NUTUG CIBEUTEUNG MUARA CIBENTANG PARIGI MEKAR CISEENG CIHOE
007 CITAYAM 230 KEMANG 006 007 008 009 010 011 013 SEMPLAK BARAT ATANG SENJAYA PARAKAN JAYA BOJONG KEMANG PABUARAN TEGAL
010 KURIPAN 250 GUNUNG SINDUR 001 JAMPANG
449

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 270 CIGUDEG 1 1 2 2 2 1 1 1 2 2 2 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2 015 016 017 018 019 020 021 CINTAMANIK BANYU WANGI BANYU ASIH TEGALEGA BATU JAJAR RENGASJAJAR BANGUNJAYA 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 2 2 2 2 1 1 2 2 K/P
KECAMATAN DESA / KELURAHAN 250 GUNUNG SINDUR 002 003 004 005 006 007 008 009 CIBADUNG CIBINONG CIDOKOM PADURENAN CURUG RAWAKALONG PENGASINAN GUNUNG SINDUR
010 PABUARAN 260 RUMPIN 001 002 003 004 005 006 007 008 009 010 011 012 LEUWIBATU CIDOKOM GOBANG RABAK CIBODAS KAMPUNG SAWAH RUMPIN CIPINANG SUKASARI KERTAJAYA TAMAN SARI SUKAMULYA
022 ARGAPURA 271 SUKAJAYA 001 002 003 004 005 006 007 008 CISARUA KIARASARI KIARAPANDAK HARKATJAYA SUKAJAYA SIPAYUNG SUKAMULIH PASIR MADANG
009 CILEUKSA 280 JASINGA 003 004 005 006 007 008 009 010 011 012 013 014 PANGRADIN KALONGSAWAH SIPAK PAMAGERSARI JUGALA JAYA CURUG TEGAL WANGI KOLEANG JASINGA SETU CIKOPOMAYAK NEGLASARI
013 MEKAR SARI 270 CIGUDEG 006 009 010 011 012 013 014 SUKARAKSA SUKAMAJU CIGUDEG BANYU RESMI WARGAJAYA BUNAR MEKARJAYA
450

Propinsi Kabupaten/Kota : : [32] [01] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 280 JASINGA 015 016 BAGOANG BARENGKOK
2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 1 1
017 PANGAUR 290 TENJO 001 002 003 004 005 006 007 008 CIOMAS TAPOS BATOK BABAKAN BOJONG SINGABRAJA TENJO CILAKU
009 SINGABANGSA 300 PARUNG PANJANG 001 002 003 004 005 006 007 008 009 010 011 JAGABAYA GOROWONG DAGO CIKUDA PINGKU LUMPANG GINTUNG CILEJET JAGABITA CIBUNAR PARUNG PANJANG KABASIRAN
451

Propinsi Kabupaten/Kota : : [32] [03] JAWA BARAT CIANJUR K/P KECAMATAN DESA / KELURAHAN 030 CIDAUN 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 001 002 003 004 005 006 007 008 009 010 011 012 KARYABAKTI SUKAPURA CISALAK JAYAPURA KERTAJADI CIDAMAR KARANGWANGI CIMARAGANG GELARPAWITAN NEGLASARI CIBULUH PUNCAKBARU 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 010 AGRABINTA 001 002 003 004 007 008 009 010 SINARLAUT BOJONGKASO SUKAMANAH WANASARI KARANGSARI NEGLASARI MULYASARI BUNISARI
012 TANJUNGSARI 011 LELES 001 002 003 004 005 006 007 008 009 010 PUSAKASARI NAGASARI SUKAJAYA SUKAMULYA PURABAYA SUKASIRNA WALAHIR PUNCAKWANGI SIRNASARI KARYAMUKTI
013 MEKARJAYA 040 NARINGGUL 001 002 003 004 005 006 007 008 009 CINERANG WANGUNJAYA MEKARSARI WANGUNSARI MALATI SUKAMULYA NARINGGUL WANASARI SUKABAKTI
011 MANDALAWANGI 020 SINDANGBARANG 001 002 003 004 005 006 007 008 009 HEGARSARI JATISARI KERTASARI TALAGASARI SIRNAGALIH SAGANTEN JAYAGIRI MUARACIKADU GIRIMUKTI
010 BALEGEDE 050 CIBINONG 001 002 003 004 005 006 PANYINDANGAN WARGALUYU HAMERANG PANANGGAPAN GIRIJAYA SUKAJADI
459

Propinsi Kabupaten/Kota : : [32] [03] JAWA BARAT CIANJUR K/P KECAMATAN DESA / KELURAHAN 060 TANGGEUNG 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 014 015 KUBANG GIRIJAYA 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 050 CIBINONG 007 008 009 015 016 020 SUKAMEKAR BATULAWANG CIKANGKARENG PAMOYANAN CIMASKARA PADASUKA
016 GIRIMUKTI 070 KADUPANDAK 010 011 012 013 014 015 016 017 018 019 020 021 PASIRDALEM SUKARAJA KADUPANDAK TALAGASARI NEGLASARI SUKAKERTA SUKARAHARJA BOJONGKASIH SUKASARI WARGASARI WARGAASIH SUKARESMI
021 MEKARMUKTI 051 CIKADU 001 002 003 004 005 006 007 008 PADALUYU SUKALUYU MEKARLAKSANA CIKADU KALAPANUNGGAL MEKARWANGI CISARANTEN SUKAMULYA
009 MEKARJAYA 060 TANGGEUNG 001 002 003 004 005 006 007 008 009 010 011 012 013 KARANGTENGAH RAWAGEDE SUKAJAYA TANGGEUNG KERTAJAYA SIRNAJAYA PASIR JAMBU CILONGSONG MARGALUYU PAGERMANEUH BOJONGPETIR PADALUYU MEKARMULYA
022 GANDASARI 071 CIJATI 001 002 003 004 005 006 007 008 PADAASIH SUKALUYU SINARBAKTI BOJONGLARANG SUKAMAHI CIJATI CIBODAS CARINGIN
009 PARAKANTUGU 080 TAKOKAK 001 002 003 WARINGINSARI SUKAGALIH SIMPANG
460

Propinsi Kabupaten/Kota : : [32] [03] JAWA BARAT CIANJUR K/P KECAMATAN DESA / KELURAHAN 100 PAGELARAN 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 014 015 016 KARANGHARJA SELAGEDANG GELAR ANYAR 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 1 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 080 TAKOKAK 004 005 006 007 008 SINDANGHAYU SINDANGRESMI BUNGBANGSARI CISUJEN PASAWAHAN
017 MEKARSARI 110 CAMPAKA 001 002 003 004 005 006 007 008 009 010 WANGUNJAYA SUKADANA KARYAMUKTI CIMENTENG GIRIMUKTI SUSUKAN SUKAJADI MARGALUYU MEKARJAYA CIDADAP
009 HEGARMANAH 090 SUKANAGARA 001 002 003 004 005 006 007 008 009 JAYAGIRI CIGUHA SUKAKARYA SUKARAME SUKALAKSANA SUKANAGARA GUNUNGSARI SINDANGSARI SUKAJEMBAR
010 SUKAMEKAR 100 PAGELARAN 001 002 003 004 005 006 007 008 009 010 011 012 013 KERTARAHARJA PAGELARAN PADAMAJU SIMPANG KALIBARU PUSAKAJAYA KARANGJAYA BUNIWANGI BUNIJAYA PANGADEGAN SITUHIANG PASIRBARU SINDANGKERTA
011 CAMPAKA 111 CAMPAKA MULYA 001 002 003 004 CAMPAKAWARNA CAMPAKAMULYA SUKABUNGAH CIBANGGALA
005 SUKASIRNA 120 CIBEBER 001 002 003 004 005 006 007 008 CIBOKOR KANOMAN CIPETIR CIKONDANG CIHAUR SUKAMANAH SALAGEDANG CIBADAK
461

Propinsi Kabupaten/Kota : : [32] [03] JAWA BARAT CIANJUR K/P KECAMATAN DESA / KELURAHAN 140 CILAKU 2 2 2 2 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 001 002 003 004 005 006 007 008 009 SUKASARI SUKAKERTA SINDANGSARI MULYASARI CIHARASHAS CIBINONG HILIR SIRNAGALIH RAHONG MUNJUL 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 1 2 K/P
KECAMATAN DESA / KELURAHAN 120 CIBEBER 009 010 011 012 013 014 015 016 017 GIRIMULYA CIMANGGU CISALAK MAYAK PEUTEUYCONDONG SUKARAHARJA SUKAMAJU CIBAREGBEG KARANGNUNGGAL
018 SALAMNUNGGAL 130 WARUNGKONDANG 002 003 004 012 013 014 015 016 017 018 CISARANDI SUKAMULYA CIKAROYA JAMBUDIPA MEKARWANGI TEGALLEGA BUNIKASIH BUNISARI CIEUNDEUR CIWALEN
010 RANCAGOONG 150 SUKALUYU 001 002 003 004 005 006 007 008 009 MEKARJAYA PANYUSUHAN SUKALUYU SUKAMULYA BABAKANSARI TANJUNGSARI SELAJAMBE HEGARMANAH SUKASIRNA
019 SUKAWANGI 131 GEKBRONG 001 002 003 004 005 006 007 008 CINTAASIH CIKANCANA SUKARATU CIKAHURIPAN GEKBRONG KEBONPEUTEUY SONGGOM BANGBAYANG
010 SINDANGRAJA 160 BOJONGPICUNG 001 002 003 004 005 006 007 008 009 SUKARAMA SUKAJAYA CIKONDANG JATISARI KEMANG CIBARENGKOK JATI BOJONGPICUNG SUKARATU
462

Propinsi Kabupaten/Kota : : [32] [03] JAWA BARAT CIANJUR K/P KECAMATAN DESA / KELURAHAN 180 MANDE 2 2 1 1 2 1 2 2 2 2 2 2 2 2 2 1 1 1 2 2 2 2 2 2 2 1 2 2 2 011 MURNISARI 2 2 2 2 2 1 1 1 1 2 2 2 2 2 2 2 1 1 1 2 1 1 1 1 1 1 1 1 2 012 MANDE 190 KARANGTENGAH 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 SUKAMANAH SINDANGASIH LANGENSARI SUKASARI MALEBER SABANDAR BOJONG HEGARMANAH BABAKANCARINGIN CIHERANG SUKAJADI SUKASARANA SUKAMANTRI SUKAMULYA SINDANGLAKA K/P
KECAMATAN DESA / KELURAHAN 160 BOJONGPICUNG 010 011 012 013 014 015 CIHEA MEKARWANGI NEGLASARI HEGARMANAH RAMASARI HAURWANGI
016 KERTASARI 170 CIRANJANG 001 002 003 004 005 006 007 008 009 010 011 KERTAMUKTI CIPEUYEUM MEKARWANGI KARANGWANGI GUNUNGSARI KERTAJAYA SINDANGJAYA SINDANGSARI CIBIUK MEKARGALIH CIRANJANG
012 NANGGALAMEKAR 180 MANDE 001 002 003 004 005 006 007 008 009 010 MEKARJAYA LEUWIKOJA KUTAWARINGIN SUKAMANAH CIANDAM JAMALI KADEMANGAN MULYASARI BOBOJONG CIKIDANGBAYABANG
016 SUKATARIS 200 CIANJUR 001 002 003 004 005 006 007 008 009 010 011 NAGRAK SUKAMAJU SAYANG SOLOKPANDAN MUKA BOJONGHERANG PAMOYANAN SAWAH GEDE LIMBANGAN SARI MEKARSARI BABAKANKARET
463

Propinsi Kabupaten/Kota : : [32] [03] JAWA BARAT CIANJUR K/P KECAMATAN DESA / KELURAHAN 221 CIPANAS 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 2 1 1 1 1 1 1 1 1 2 009 SINDANGJAYA 230 SUKARESMI 001 002 003 004 005 006 007 008 009 010 PAKUON CIKANYERE SUKARESMI CIWALEN KAWUNGLUWUK CIBADAK RAWABELUT CIBANTENG KUBANG SUKAMAHI 1 2 2 2 2 1 1 2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 210 CUGENANG 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 PADALUYU SUKAJAYA CIBULAKAN CIRUMPUT TALAGA BENJOT GASOL SARAMPAD MANGUNKERTA SUKAMULYA GALUDRA NYALINDUNG CIBEUREUM CIJEDIL SUKAMANAH
011 CIKANCANA 240 CIKALONGKULON 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 PADAJAYA CINANGSI MENTENGSARI GUDANG SUKAGALIH MAJALAYA CIJAGANG MEKARJAYA MEKAR SARI SUKAMULYA MEKARGALIH NEGLASARI LEMBAHSARI WARUDOYONG KAMURANG CIRAMA GIRANG MEKAR MULYA
016 WANGUNJAYA 220 PACET 001 002 003 004 005 008 CIPUTRI CIHERANG CIPENDAWA CIBODAS GADOG SUKATANI
014 SUKANAGALIH 221 CIPANAS 002 003 004 005 006 007 CIPANAS SINDANGLAYA PALASARI CIMACAN CILOTO BATULAWANG
464

Propinsi Kabupaten/Kota : : [32] [03] JAWA BARAT CIANJUR K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 240 CIKALONGKULON 018 CIGUNUNGHERANG
465

Propinsi Kabupaten/Kota : : [32] [16] JAWA BARAT BEKASI K/P KECAMATAN DESA / KELURAHAN 023 CIKARANG SELATAN RAGEMANUNGGAL MUKTIJAYA KERTARAHAYU CIKARAGEMAN TAMAN SARI TAMAN RAHAYU BURANGKENG CILEDUK CIBENING CIJENGKOL 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 1 004 005 006 SERANG SUKARESMI CIBATU 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 1 2 2 1 2 1 2 2 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 SETU 001 002 003 004 005 006 007 008 009 012
007 PASIRSARI 030 CIBARUSAH 001 002 003 004 005 006 CIBARUSAHJAYA CIBARUSAHKOTA SINDANGMULYA WIBAWAMULYA SIRNAJATI RIDOGALIH
013 LUBANGBUAYA 021 SERANG BARU 001 002 003 004 005 006 007 JAYAMULYA SUKARAGAM SIRNAJAYA NAGACIPTA NAGASARI CILANGKARA SUKASARI
007 RIDOMANAH 031 BOJONGMANGU 001 002 003 004 005 KARANGINDAH KARANGMULYA BOJONGMANGU MEDALKRISNA SUKAMUKTI
008 JAYASAMPURNA 022 CIKARANG PUSAT 001 002 003 004 005 CICAU SUKAMAHI PASIRPANJI PASIRTANJUNG HEGARMUKTI
006 SUKABUNGAH 041 CIKARANG TIMUR 001 002 003 004 005 006 007 SERTAJAYA HEGARMANAH CIPAYUNG JATIREJA JATIBARU TANJUNGBARU LABANSARI
006 JAYAMUKTI 023 CIKARANG SELATAN 001 002 003 SUKASEJATI CIANTRA SUKADAMI
008 KARANGSARI 050 KEDUNGWARINGIN 002 003 BOJONGSARI KEDUNGWARINGIN
540

Propinsi Kabupaten/Kota : : [32] [16] JAWA BARAT BEKASI K/P KECAMATAN DESA / KELURAHAN 070 CIBITUNG 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 1 1 2 1 016 017 KERTAMUKTI MUKTIWARI 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 050 KEDUNGWARINGIN 004 005 007 008 WARINGINJAYA KARANGSAMBUNG KARANGHARUM MEKARJAYA
018 SARIMUKTI 071 CIKARANG BARAT 001 002 003 004 005 006 007 008 009 010 TELAJUNG CIKEDOKAN JATIWANGI MEKARWANGI GANDAMEKAR DANAUINDAH GANDASARI SUKADANAU TELAGA ASIH TELAGAMURNI
009 KARANGMEKAR 061 CIKARANG UTARA 001 002 003 004 005 006 007 008 009 010 WANGUNHARJA HARJAMEKAR PASIRGOMBONG MEKARMUKTI SIMPANGAN TANJUNGSARI CIKARANG KOTA KARANGBARU KARANGASIH KARANGRAHARJA
011 KALIJAYA 081 TAMBUN SELATAN 001 002 003 004 005 006 007 008 009 JATIMULYA LAMBANGSARI LAMBANGJAYA TAMBUN SETIADARMA SETIAMEKAR MEKARSARI TRIDAYASAKTI MANGUNJAYA
011 WALUYA 062 KARANGBAHAGIA 001 002 003 004 005 006 007 SUKARAYA KARANGRAHAYU KARANGSETIA KARANGSATU KARANGMUKTI KARANGANYAR KARANGBAHAGIA
008 KARANGSENTOSA 070 CIBITUNG 006 013 014 015 CIBUNTU WANASARI WANAJAYA SUKAJAYA
010 SUMBERJAYA 082 TAMBUN UTARA 001 002 003 004 KARANGSATRIA SATRIAJAYA JALENJAYA SATRIAMEKAR
541

Propinsi Kabupaten/Kota : : [32] [16] JAWA BARAT BEKASI K/P KECAMATAN DESA / KELURAHAN 111 SUKAWANGI 1 2 2 2 1 1 1 1 2 2 2 2 2 2 1 2 2 1 1 2 2 2 2 2 2 2 2 2 001 002 003 004 005 006 SUKAMEKAR SUKADAYA SUKABUDI SUKAWANGI SUKAKERTA SUKARINGIN 2 2 1 2 2 2 2 2 1 2 2 2 1 1 2 2 2 2 2 2 2 2 1 1 2 2 2 2 K/P
KECAMATAN DESA / KELURAHAN 082 TAMBUN UTARA 005 006 007 SRIAMUR SRIMUKTI SRIJAYA
008 SRIMAHI 090 BABELAN 001 002 003 004 005 006 007 008 BAHAGIA KEBALEN BABELAN KOTA KEDUNGPENGAWAS KEDUNGJAYA BUNIBAKTI MUARABAKTI PANTAI HURIP
007 SUKATENANG 120 SUKATANI 001 002 003 004 005 006 SUKAASIH SUKARUKUN BANJARSARI SUKAHURIP SUKAMANAH SUKAMULYA
009 HURIPJAYA 100 TARUMAJAYA 001 002 003 004 005 006 007 PUSAKARAKYAT SETIA ASIH PAHLAWAN SETIA SETIAMULYA SEGARAMAKMUR PANTAIMAKMUR SEGARAJAYA
007 SUKADARMA 121 SUKAKARYA 001 002 003 004 005 006 SUKAJADI SUKAMAKMUR SUKALAKSANA SUKAKERSA SUKAKARYA SUKAINDAH
008 SAMUDRAJAYA 110 TAMBELANG 003 004 005 006 007 008 009 SUKAMAJU SUKARAJA SUKARAPIH SUKARAHAYU SUKABAKTI SUKAWIJAYA SUKAMANTRI
007 SUKAMURNI 130 PEBAYURAN 001 002 003 004 005 006 007 BANTARSARI BANTARJAYA KERTASARI KERTAJAYA KARANGHAUR KARANGPATRI KARANGREJA
542

Propinsi Kabupaten/Kota : : [32] [16] JAWA BARAT BEKASI K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 130 PEBAYURAN 008 009 010 011 012 KARANGJAYA SUMBERSARI SUMBERREJA SUMBERURIP KARANGSEGAR
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2
013 KARANGHARJA 140 CABANGBUNGIN 001 002 003 004 005 006 007 JAYABAKTI SINDANGJAYA SINDANGSARI JAYALAKSANA SETIALAKSANA LENGGAHJAYA SETIAJAYA
008 LENGGAHSARI 150 MUARA GEMBONG 001 002 003 004 005 006 PANTAI HARAPANJAYA PANTAIMEKAR PANTAI SEDERHANA PANTAIBAKTI PANTAIBAHAGIA JAYASAKTI
543

Propinsi Kabupaten/Kota : : [32] [71] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN 030 BOGOR UTARA 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 008 CIPARIGI 040 BOGOR TENGAH 001 002 003 004 005 006 007 008 009 010 PALEDANG GUDANG BABAKANPASAR TEGALLEGA BABAKAN SEMPUR PABATON CIBOGOR PANARAGAN KEBONKELAPA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 BOGOR SELATAN 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 MULYAHARJA PAMOYANAN RANGGAMEKAR GENTENG KERTAMAYA RANCAMAYA BOJONGKERTA HARJASARI MUARASARI PAKUAN CIPAKU LAWANGGINTUNG BATUTULIS BONDONGAN EMPANG
011 CIWARINGIN 050 BOGOR BARAT 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 PASIRMULYA PASIRKUDA PASIRJAYA GUNUNGBATU LOJI MENTENG CILENDEK TIMUR CILENDEK BARAT SINDANGBARANG MARGAJAYA BALUNGBANG JAYA SITUGEDE BUBULAK SEMPLAK CURUGMEKAR
016 CIKARET 020 BOGOR TIMUR 001 002 003 004 005 SINDANGSARI SINDANGRASA TAJUR KATULAMPA BARANANGSIANG
006 SUKASARI 030 BOGOR UTARA 001 002 003 004 005 006 007 BANTARJATI TEGALGUNDIL TANAHBARU CIMAHPAR CILUAR CIBULUH KEDUNGHALANG
016 CURUG 060 TANAH SEREAL 001 KEDUNGWARINGIN
547

Propinsi Kabupaten/Kota : : [32] [71] JAWA BARAT BOGOR K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 060 TANAH SEREAL 002 003 004 005 006 007 008 009 010 011 KEDUNGJAYA KEBONPEDES TANAHSAREAL KEDUNGBADAK SUKARESMI SUKADAMAI CIBADAK KAYUMANIS MEKARWANGI KENCANA
1 1 1 1 1 1 1 1 1 1
548

Propinsi Kabupaten/Kota : : [32] [75] JAWA BARAT BEKASI K/P KECAMATAN DESA / KELURAHAN 031 MUSTIKA JAYA 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 004 MUSTIKA SARI 040 BEKASI TIMUR 005 006 007 MARGAHAYU BEKASI JAYA DUREN JAYA 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 PONDOKGEDE 008 009 010 011 JATIMAKMUR JATIWARINGIN JATIBENING JATICEMPAKA
012 JATIBENING BARU 011 JATISAMPURNA 001 002 003 004 JATIKARYA JATISAMPURNA JATIRANGGA JATIRANGGON
008 AREN JAYA 041 RAWALUMBU 001 002 003 BOJONG MENTENG BOJONG RAWALUMBU SEPANJANG JAYA
006 JATI RADEN 012 PONDOK MELATI 001 002 003 JATIMURNI JATIMELATI JATIWARNA
004 PENGASINAN 050 BEKASI SELATAN 001 002 003 004 JAKA MULYA JAKA SETIA PEKAYON JAYA MARGA JAYA
004 JATIRAHAYU 020 JATIASIH 001 002 003 004 005 JATISARI JATILUHUR JATIRASA JATIASIH JATIMEKAR
007 KAYURINGIN JAYA 060 BEKASI BARAT 001 002 003 005 BINTARA JAYA BINTARA KRANJI KOTA BARU
006 JATIKRAMAT 030 BANTARGEBANG 001 002 003 CIKETINGUDIK SUMUR BATU CIKIWUL
008 JAKA SAMPURNA 061 MEDAN SATRIA 001 002 003 HARAPAN MULYA KALI BARU MEDAN SATRIA
004 BANTARGEBANG 031 MUSTIKA JAYA 001 002 003 PADURENAN CIMUNING MUSTIKA JAYA
004 PEJUANG 070 BEKASI UTARA 001 002 003 HARAPAN JAYA KALIABANG TENGAH PERWIRA
554

Propinsi Kabupaten/Kota : : [32] [75] JAWA BARAT BEKASI K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 070 BEKASI UTARA 004 005 006 HARAPAN BARU TELUK PUCUNG MARGA MULYA
1 1 1
555

Propinsi Kabupaten/Kota : : [32] [76] JAWA BARAT DEPOK K/P KECAMATAN DESA / KELURAHAN 030 SUKMA JAYA 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 005 006 007 008 009 010 SUKAMAJU SUKMAJAYA TIRTAJAYA MEKAR JAYA ABADIJAYA BAKTI JAYA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K/P
KECAMATAN DESA / KELURAHAN 010 SAWANGAN 001 002 003 004 005 006 007 008 009 010 011 012 013 DUREN MEKAR DUREN SERIBU PENGASINAN BEDAHAN PASIR PUTIH SAWANGAN BARU SAWANGAN LAMA BOJONGSARI LAMA BOJONGSARI BARU CURUG PONDOK PETIR SERUA KEDAUNG
011 CISALAK 040 CIMANGGIS 001 002 003 004 005 006 007 008 009 010 011 012 CILANGKAP CIMPAEUN TAPOS LEUWINAGGUNG JATIJAJAR SUKAMAJU BARU CURUG SUKATANI HARJAMUKTI CISALAK PASAR MEKARSARI TUGU
014 CINANGKA 020 PANCORAN MAS 001 002 003 004 005 006 007 008 009 010 CIPAYUNG JAYA BOJONG PONDOK TERONG PONDOK JAYA RATUJAYA CIPAYUNG RANGKAPAN JAYA BARU RANGKAPAN JAYA MAMPANG PANCORAN MAS DEPOK JAYA
013 PASIR GUNUNG SELATAN 050 BEJI 001 002 003 004 005 BEJI BEJI TIMUR KEMIRIMUKA PONDOK CINA KUKUSAN
011 DEPOK 030 SUKMA JAYA 001 002 003 004 KALIMULYA JATIMULYA KALIBARU CILODONG
006 TANAH BARU 060 LIMO 001 002 MERUYUNG GROGOL
556

Propinsi Kabupaten/Kota : : [32] [76] JAWA BARAT DEPOK K/P KECAMATAN DESA / KELURAHAN K/P
KECAMATAN DESA / KELURAHAN 060 LIMO 003 004 005 006 007 008 KRUKUT LIMO CINERE GANDUL PANGKALANJATI BARU PANGKALANJATI
1 1 1 1 1 1
557
Dibuat 2 rangkap : 1. BPS Kabupaten/Kota (Pita Oranye) 2. Desa/Kelurahan (Biru)
REPUBLIK INDONESIA BADAN PUSAT STATISTIK
SENSUS EKONOMI 2006

PENDATAAN POTENSI DESA/KELURAHAN
Rahasia
I. PENGENALAN TEMPAT
NO. RINCIAN
SE2006-PODES
Kode Kode (Desember 2004) (Saat Pencacahan)
101 Provinsi
)
102 Kabupaten/Kota * 103 Kecamatan 104 Desa/Kelurahan* 105 Daerah

)
Perkotaan Pertanian Pertambangan dan penggalian Industri pengolahan Listrik, Gas, Air Minum Konstruksi
-1 -1 -2 -3 -4 -5
Perdesaan Perdagangan Angkutan Lembaga Keuangan Jasa Tidak punya
-2 -6 -7 -8 -9 -10
106 Potensi ekonomi desa/kelurahan yang paling menonjol dan sudah diberdayakan
II. KETERANGAN PETUGAS

NO. 201 202 203 RINCIAN Nama Petugas NIP Tanggal Pengisian/Pemeriksaan PENCACAH PENGAWAS/PEMERIKSA
204
Tanda Tangan , 2005
*) Coret yang tidak sesuai
Mengetahui Kepala Desa/Lurah
DAFTAR INI TIDAK DIPERKENANKAN DIISI LANGSUNG OLEH PERANGKAT DESA/KELURAHAN DAN NARA SUMBER LAINNYA, TETAPI HARUS DIISI OLEH PETUGAS BPS BERDASARKAN HASIL WAWANCARA LANGSUNG
Nama dan Cap Desa/Kelurahan
III. KETERANGAN UMUM DESA/KELURAHAN

NO. 301 Status pemerintahan: Desa Kelurahan RINCIAN KODE
-1 -2
Nagari Lainnya: (Tuliskan)
-3 -4
302
Badan Perwakilan Desa/Dewan Kelurahan: Ada -1 a. RT/RW : b. Jika R303a = 1, isikan jumlah 1) Rukun Warga : 2) Rukun Tetangga : Ada -1
Tidak Tidak -2
-2 R303c .. RW .. RT (..)
303
c. Nama satuan lingkungan setempat (SLS) selain RT/RW : .(Nama SLS) 304 a. b. Letak geografis desa/kelurahan: Pesisir/tepi laut -1 Jika R304a = 2, maka: - Lembah/daerah aliran sungai - Lereng/punggung bukit - Dataran
R305
Bukan pesisir
-2 -1 -2 -3
305
Letak desa/kelurahan ini berada : Di dalam kawasan hutan - 1 Di tepi kawasan hutan -2 Di luar kawasan hutan - 3
IV. KEPENDUDUKAN DAN KETENAGAKERJAAN

NO. 401 Penduduk dan keluarga a. Jumlah penduduk laki-laki b. Jumlah penduduk perempuan c. Jumlah keluarga d. Persentase keluarga pertanian e. Jumlah Pra KS dan KS I 402 RINCIAN KODE
: : : : :
..... orang ..... orang .. keluarga .. persen .. keluarga
a. b. c. d. e.
Sumber penghasilan utama sebagian besar penduduk: Pertanian Pertambangan dan penggalian Industri Pengolahan Perdagangan besar/eceran, rumah makan dan akomodasi Jasa Lainnya (Angkutan, Komunikasi dan lainnya) a.
-1 -2 -3 -4 -5 -6
R403 R404 R405
403
Jika R402 = 1, sumber penghasilan utama penduduk pada sub sektor:
Tanaman pangan - 1 Perikanan darat - 4 Kehutanan -6 Perkebunan -2 Perikanan laut -5 Lainnya -7 Peternakan -3 b. Jika R403a = 1 atau 2, hasil produksi pertanian tanaman pangan/perkebunan dipakai oleh sebagian besar penduduk untuk: Dikonsumsi sendiri -1 Dikonsumsi dan dijual -3 Dijual -2 404 405 Jika R402 = 1, 2 atau 3, sebutkan satu komoditi/produk unggulan: .. Penduduk yang bekerja sebagai buruh tani: orang (..)
NO. 406
RINCIAN a. Apakah di desa/kelurahan ini ada penduduk yang bekerja sebagai TKI (ke luar negeri): Ada -1 Tidak -2 b. Jika R406a =1 Jumlah TKI laki-laki :
KODE
Blok Va orang orang
Jumlah TKI perempuan:
c. Negara tujuan mayoritas TKI dari desa/kelurahan ini: ..
VA. PERUMAHAN DAN LINGKUNGAN HIDUP

NO. 501 a. b. RINCIAN Keluarga yang menggunakan listrik: Ada -1 Tidak KODE
-2
R502 .. keluarga .. keluarga
Jika R501a = 1, keluarga yang menggunakan listrik: 1. Listrik PLN: 2. Listrik Non PLN:
502
a. b.
Penerangan jalan utama desa/kelurahan: Ada -1 Tidak Jika R502a = 1, jenisnya:
-2
R503 -1 -2 -3
Listrik diusahakan oleh Pemerintah Listrik Non Pemerintah Non Listrik
503
Bahan bakar yang digunakan oleh sebagian besar keluarga untuk memasak: Gas kota/LPG -1 Kayu bakar Minyak tanah -2 Lainnya (batu bara, arang, dll) Tempat buang sampah sebagian besar keluarga: Tempat sampah, kemudian diangkut - 1 Sungai Dalam lubang/dibakar -2 Lainnya: (Tuliskan)
-3 -4
504
-3 -4
505
Tempat buang air besar sebagian besar keluarga: Jamban sendiri -1 Jamban umum Jamban bersama -2 Bukan jamban a. Sungai yang melintasi desa/kelurahan ini: Ada -1 Tidak b. Jika R506a = 1, air sungai digunakan untuk 1) Mandi/cuci 2) Minum 3) Bahan baku air minum (dijernihkan) 4) Irigasi 5) Untuk industri/pabrik 6) Transportasi 7) Lainnya
-3 -4
506
-2 Ya Ya Ya Ya Ya Ya Ya
R508 -1 -3 -5 -7 -1 -3 -5 Tidak Tidak Tidak Tidak Tidak Tidak Tidak -2 -4 -6 -8 -2 -4 -6 1) 2) 3) 4) 5) 6) 7)
507
a. Keluarga yang bertempat tinggal di bantaran/tepi sungai: Ada -1 Tidak -2 b. Jika R507a = 1, 1) Jumlah keluarga: 2) Jumlah bangunan rumah:
R508 .... keluarga . unit
NO. 508
RINCIAN a. Keluarga yang bertempat tinggal di bawah Jaringan listrik tegangan tinggi (> 500 KV): Ada -1 Tidak - 2 ke R509 Tidak ada listrik tegangan tinggi -3 b. Jika R508a = 1, 1) Jumlah keluarga : .. keluarga 2) Jumlah bangunan rumah: .. unit Ada Ada : : -1 -1 Tidak Tidak -2 -2 .... lokasi .... unit . keluarga R510 1) 2) 3)
KODE
509
a. Permukiman mewah: b. Permukiman kumuh: c. Jika R509b = 1, 1) Jumlah lokasi 3) Jumlah keluarga
2) Jumlah bangunan rumah :
510
Pencemaran lingkungan hidup setahun terakhir Ada - 1 Tidak - 2 (Jika Kol. (2) = 2, Kol. (3) dan Kol. (4) kosong) (2) Sumber pencemaran: Limbah Keluarga - 1 Pabrik -2 Lainnya -3 (3) Pengaduan ke Kades/Lurah Ada - 1 Tidak - 2 (4)
Jenis pencemaran (1) a. Air b. Tanah c. Udara d. Suara/bising 511
Usaha penambangan/penggalian golongan C desa/kelurahan ini (batu kali, pasir, kapur, Tidak -2 kaolin, dan lainnya): Ada -1
VB. ANTISIPASI DAN KEJADIAN BENCANA ALAM

NO. 512 RINCIAN Apakah desa/kelurahan ini rawan bencana: Ya -1 Tidak -2 R513 Jika Kolom (2) = 1 Jumlah keluarga yang tinggal di daerah rawan bencana (3) a. b. c. d. e. KODE
Jenis bencana (1) a. Tanah longsor b. Banjir c. Banjir bandang d. Gempa bumi e. Abrasi pantai 513
Ada
-1
Tidak (2)
-2
a. b. c. d. e.
Bencana alam dalam 3 tahun terakhir yang menyebabkan kerugian/kerusakan a. Tanah longsor Ada -1 Tidak b. Banjir Ada -3 Tidak c. Banjir bandang Ada -5 Tidak d. Gempa bumi Ada -7 Tidak e. Gempa bumi disertai tsunami Ada -1 Tidak f. Kebakaran Ada -3 Tidak g. Pembakaran hutan/ladang/sawah Ada -5 Tidak h. Lainnya: Ada -7 Tidak (Tuliskan)
-2 -4 -6 -8 -2 -4 -6 -8
a. b. c. d. e. f. g. h.
VI. PENDIDIKAN DAN KESEHATAN

NO. 601 Pendidikan (1) a. TK b. SD dan yang sederajat c. SLTP dan yang sederajat d. SMU dan yang sederajat e. SMK f. Akademi/PT dan yang sederajat g. Sekolah Luar Biasa h. Pondok pesantren/Madrasah Diniyah i. Seminari atau sejenisnya 602 Lembaga pendidikan keterampilan yang berada di desa/kelurahan Jenis Keterampilan (1) a. b. c. d. e. f. g. h. i. Bahasa Tata buku/akuntansi Komputer Memasak/tata boga Menjahit/tata busana Kecantikan Montir mobil/motor Elektronik Lainnya: (Tuliskan) 603 Sarana Kesehatan Jumlah Sarana Kesehatan Jika Kolom (2) = 0 Kemudahan untuk Mencapai: Jarak dari desa/ Sangat mudah - 1 kelurahan ke sarana Mudah -2 kesehatan (km) Sulit -3 Sangat sulit -4 (3) (4) a. b. c. d. e. f. g. h. i. j. k. , , , , , , , , , , , a. b. c. d. e. f. g. h. i. j. k. a. b. c. d. e f. g. h. i. Ada -1 Tidak (2) -2 Jika Kolom (2) = 1, Jumlah (3) a. b. c. d. e f. g. h. i. a. b. c. d. e. f. g. RINCIAN Jumlah sekolah Negeri (2) a. b. c. d. e. f. g. h. i. Swasta (3) KODE Jika Kol. (2) = 0 dan Kol. (3) = 0 Jarak ke sekolah terdekat (km) (4) a. b. c. d. e. , , , , ,
(1) a. b. c. d. e. f. g. h. i. j. Rumah Sakit Rumah Sakit Bersalin/Rumah Bersalin Poliklinik/Balai Pengobatan Puskesmas Puskesmas Pembantu Tempat Praktek Dokter Tempat Praktek Bidan Posyandu Polindes (Pondok Bersalin Desa) Apotik a. b. c. d. e. f. g. h. i. j. k.
(2)
k. Toko khusus obat/jamu 604
Tenaga kesehatan yang tinggal di desa/kelurahan ini: a. 1. Dokter pria 2. Dokter wanita b. Mantri Kesehatan c. Bidan d. 1. Dukun bayi terlatih 2. Dukun bayi belum dilatih orang orang orang orang orang orang b. c. d.1. 2. a. 1. 2.
NO. 605 606 607
RINCIAN Jumlah keluarga yang menerima "kartu sehat/kartu peserta program jaminan kesehatan masyarakat miskin" dalam setahun terakhir: .... keluarga Jumlah Surat Miskin yang dikeluarkan dalam setahun terakhir: Wabah penyakit selama setahun terakhir (1) a. b. c. d. e. f. Muntaber/diare Demam berdarah Campak Infeksi Saluran Pernapasan Atas (ISPA) Malaria Lainnya: (Tuliskan) a. b. c. d. e. f. .... Surat Ada Tidak (2) -1 -2
KODE
Jumlah yang meninggal Jika Kolom (2) = 1 (3) a. b. c. d. e. f.
608
a.
b.
Keperluan air untuk minum/memasak pada umumnya bersumber dari: PAM/Air dalam kemasan -1 Sungai/danau -5 Pompa listrik/tangan -2 Air hujan -6 -7 Sumur -3 Lainnya: Mata air -4 (Tuliskan) Penduduk desa/kelurahan ini yang membeli air untuk minum/memasak (tidak termasuk air dalam kemasan): Ada -1 Tidak -2
VII. SOSIAL BUDAYA

NO. 701 RINCIAN Agama/kepercayaan apa saja yang ada di desa/kelurahan ini: Islam -1 Katholik -4 Budha - 16 Kristen - 2 Hindu -8 Konghucu - 32 Lainnya [ jika hanya ada satu agama langsung ke R703] Mayoritas pemeluk agama/kepercayaan di desa/kelurahan ini: Islam -1 Katholik -3 Budha -5 Kristen - 2 Hindu -4 Konghucu -6 Jumlah tempat ibadah a. b. c. d. e. f. 704 Masjid Surau/Langgar Gereja Kristen Gereja Katolik Pura Vihara/Klenteng .. unit .. unit .. unit .. unit .. unit .. unit a. b. c. d. e. f. KODE
- 64
702
Lainnya
-7
703
Fasilitas Perlindungan Sosial dan Lembaga/Organisasi Kemasyarakatan Jenis fasilitas dan lembaga/organisasi kemasyarakatan (1) a. Fasilitas Perlindungan Sosial 1) Panti asuhan 2) Panti wreda/jompo 3) Panti cacat/YPAC 4) Panti bina remaja 5) Panti rehabilitasi anak 6) Panti rehabilitasi WTS b. Lembaga/Organisasi Kemasyarakatan 1) Majelis ta'lim/kelompok pengajian/kelompok kebaktian 2) Yayasan/kelompok/persatuan kematian 3) Lembaga Swadaya Masyarakat (LSM) Ada Keberadaan -1 Tidak (2) a. 1) 2) 3) 4) 5) 6) b. 1) 2) 3) -2 Ada Kegiatan -1 Tidak (3) a. 1) 2) 3) 4) 5) 6) b. 1) 2) 3) -2
NO. 705 Penyandang Cacat
RINCIAN
KODE
Jenis cacat
Keberadaan Ada -1 Tidak -2 (2) a. b. c. d. e.
Jika Kolom (2) = 1 Jumlah yang tinggal di Panti (orang) (3) a. b. c. d. e. Jumlah yang tinggal di keluarga (orang) (4) a. b. c. d. e.
(1) a. Tuna Netra (buta) b. Tuna Rungu-Wicara (bisu-tuli) c. Tuna Grahita (cacat mental) d. Tuna Daksa (cacat tubuh) e. Tuna Ganda (cacat tubuh dan buta/bisu-tuli/mental) 706 Situs/Bangunan bersejarah a. Gedung bersejarah b. Jembatan bersejarah c. Candi d. Pelabuhan bersejarah e. Stasiun kereta api bersejarah g. Lainnya: (Tuliskan) 707 Ada Ada Ada Ada Ada Ada -1 -3 -5 -7 -1 -3 -5
Tidak - 2 Tidak Tidak Tidak Tidak Tidak Tidak -4 -6 -8 -2 -4 -6
a. b. c. d. e. f. g.
f. Tempat spiritual (misal: mesjid kuno, petilasan) Ada
Penduduk desa/kelurahan ini mempunyai tradisi gotong-royong yang kental/kuat (menyumbang tenaga secara langsung) dalam membangun fasilitas umum desa/kelurahan seperti: jalan, jembatan, tempat ibadah, dan fasilitas umum lainnya. Ya -1 Tidak -2 Penduduk desa/kelurahan ini yang berjudi (sabung ayam, toto gelap/togel, dan sejenisnya): Ada sebagian besar -1 Ada sebagian kecil -2 Tidak ada -3 Tempat transaksi seks komersial di desa/kelurahan ini: Ada -1 Tidak -2
708
709
710
Desa/kelurahan ini dihuni oleh lebih dari satu suku/etnis: Ya -1 Tidak Mayoritas suku/etnis di desa/kelurahan ini:
-2
711
(di isi BPS Kab/Kota)
VIII. REKREASI, HIBURAN, DAN OLAH RAGA

NO. RINCIAN KODE
801
Tempat hiburan/tempat rekreasi (komersial) a. b. c. Alam: Budaya Lainnya: (Tuliskan) 1. Bahari : : Ada Ada Ada Ada -1 -1 -1 -1 Tidak Tidak Tidak Tidak -2 -2 -2 -2 b. c. a. 1 2 2. Non Bahari :
802
a. Gedung bioskop: b. Jika R802a = 2, Jarak ke gedung bioskop terdekat: a. Pub/diskotik/tempat karaoke: b. Jika R803a = 2, Jarak ke pub/diskotik/tempat karaoke terdekat:
Ada
-1
Tidak
-2 ,
... km Ada -1 Tidak -2
803
... km
NO. 804 Olah Raga Jenis Olah Raga (1) a. b. c. d. e. f. g. h. Sepak Bola Bola Voli Bulu Tangkis Bola Basket Tenis Lapangan Renang Tenis Meja Bela diri (pencak silat, karate, dll)
RINCIAN
KODE
Lapangan (2) Ada Ada Ada Ada Ada Ada - 1 Tidak - 2 - 3 Tidak - 4 - 5 Tidak - 6 - 7 Tidak - 8 - 1 Tidak - 2 - 3 Tidak - 4
Kelompok Kegiatan (3) Ada Ada Ada Ada Ada Ada Ada Ada - 1 Tidak - 2 - 3 Tidak - 4 - 5 Tidak - 6 - 7 Tidak - 8 - 1 Tidak - 2 - 3 Tidak - 4 - 5 Tidak - 6 - 7 Tidak - 8
IX. ANGKUTAN, KOMUNIKASI, DAN INFORMASI

NO. 901 RINCIAN Sarana dan prasarana transportasi antar desa/kelurahan a. Lalu lintas dari dan ke desa/kelurahan melalui: Darat -1 Air -2 R902 b. Jika R901a = "1" atau 3 1. Jenis permukaan jalan yang terluas: Aspal/Beton Diperkeras (kerikil, batu, dsb) -1 -2 Tanah Lainnya: (Tuliskan) 2. Apakah dapat dilalui kendaraan bermotor roda 4 atau lebih sepanjang tahun: Ya 902 -1 Tidak -2 KODE
Darat dan air
-3
-3 -4
Jarak, waktu tempuh, rata-rata ongkos yang dikeluarkan dan jenis angkutan umum yang digunakan penduduk Angkutan umum Reguler Waktu Rata-rata ongkos yang digunakan Jarak Dari desa ke: Carter/ tempuh yang dikeluarkan (Km) Apa saja*) Yang (Menit) (Rp.000) sewa Utama*) ( 1 jenis) (1) (2) (3) (4) (5) (6) (7) Ibukota Kecamatan Ibukota Kabupaten/Kota Ibukota Kabupaten/Kota lain terdekat , , ,
-1 -2
*) Kode untuk Kolom (5) dan Kolom (6) Ojek sepeda/Becak/Gerobak/pedati/delman/dokar/bendi Ojek sepeda motor Kendaraan bermotor roda 3 atau lebih 903 904 905 906 907
-1 -2 -4
Perahu tidak bermotor Perahu motor tempel/Kapal motor Lainnya ..... unit ... keluarga
-8 - 16 - 32
Jumlah terminal penumpang kendaraan bermotor roda 4 atau lebih: Jumlah keluarga yang berlangganan telepon kabel: Telepon umum koin/kartu yang masih aktif: Wartel/Kiospon/Warpostel/Warparpostel: Warung internet (Warnet): Ada -1
Tidak
-2
..... unit ..... unit
NO. 908
RINCIAN a. Kantor Pos/Pos Pembantu/Rumah Pos: b. Jika R908a = 2, jarak ke Kantor Pos terdekat: Ada -1 R909 Tidak -2
KODE
.. km Ada -1 Tidak -2
909 910
Pos Keliling:
Program TV yang dapat diterima di desa/kelurahan ini (tanpa antena parabola/ TV kabel): a. b. TVRI TV Swasta Nasional: 1. TRANS 2. 3. 4. 5. 6. 7. 8. 9. 10. c. d. TPI RCTI SCTV INDOSIAR TV 7 GLOBAL ANTV LATIVI METRO Bisa Bisa Bisa Bisa Bisa Bisa Bisa Bisa Bisa Bisa Bisa Bisa Bisa -1 -1 -3 -5 -7 -1 -3 -5 -7 -1 -3 -1 -1 Tidak Tidak Tidak Tidak Tidak Tidak Tidak Tidak Tidak Tidak Tidak Tidak Tidak -2 -2 -4 -6 -8 -2 -4 -6 -8 -2 -4 -2 -2 a. b.1. 2. 3. 4. 5. 6. 7. 8. 9. 10. c. d.
TV Luar Negeri TV Lokal
911
Sinyal telepon genggam/hand phone/mobile phone tanpa satelit di desa/kelurahan ini: Ada kuat -1 Ada lemah -2 Tidak ada -3
X. PENGGUNAAN LAHAN
NO. 1001 1002 RINCIAN Luas desa/kelurahan (R1002 + R1003): Luas lahan sawah (a + b + c): a. Lahan sawah berpengairan yang diusahakan: b. Lahan sawah tidak berpengairan yang diusahakan : c. Lahan sawah sementara tidak diusahakan: 1003 Luas lahan bukan sawah (a + b + c + d): a. Lahan pertanian (kolam/tambak/perkebunan/ hutan rakyat/padang rumput): b. Ladang yang diusahakan: c. Ladang yang tidak diusahakan: d. Lahan untuk non pertanian (permukiman/perumahan/ pertokoan/perkantoran/industri dan lainnya): .. ha .. ha .. ha .. ha .. ha .. ha .. ha .. ha .. ha .. ha LUAS (Ha) , , , , , , , , , ,
XI. EKONOMI
NO. 1101 Perusahaan Pertanian berbadan hukum a. Perusahaan pertanian tanaman pangan: b. Perusahaan perkebunan: c. Perusahaan peternakan: d. Perusahaan perikanan tangkap/tambak/budidaya laut: e. Perusahaan kehutanan: f. Perusahaan pertanian lainnya: Ada Ada Ada Ada Ada Ada -1 -3 -5 -7 -1 -3 Tidak Tidak Tidak Tidak Tidak Tidak -2 -4 -6 -8 -2 -4 RINCIAN KODE
a. b. c. d. e. f.
NO.
RINCIAN
KODE
1102
Kios sarana produksi pertanian:
a. Milik KUD: b. Milik Non KUD:
.. unit .. unit -1 -1 -1 Tidak Tidak Tidak -2 -2 -2
1103 1104 1105 1106 1107 1108
Kawasan industri: Sentra industri: Lingkungan/Perkampungan industri kecil (LIK/PIK): Jumlah industri besar ( 100 pekerja): Jumlah industri sedang (20-99 pekerja):
Ada Ada Ada
...... unit ...... unit
Industri Kecil (5 19 pekerja)/Kerajinan Rumah Tangga (1 - 4 pekerja) Jenis industri kecil/kerajinan rumah tangga (1) a. b. c. d. e. f. g. h. Kerajinan dari kulit: Kerajinan dari kayu: Kerajinan dari logam/logam mulia: Anyaman: Gerabah/keramik: Kerajinan dari kain/tenun: Makanan: Lainnya: (Tuliskan) ..... unit ..... unit ..... unit ..... unit ..... unit ..... unit ..... unit ..... unit ..... unit Ada -1 R1111 Tidak -2 , a. b. c. d. e. f. g. h. Jumlah (unit) (2)
1109 1110
Perusahaan listrik Non PLN: a. Kelompok pertokoan:
b. Jika R1110a = 2, Jarak ke kelompok pertokoan terdekat: 1111 a. Bangunan pasar permanen/ semi permanen:
. km
Ada
-1
R1112
Tidak
-2 ,
b. Jika R1111a = 2, Jarak ke pasar terdekat: 1112 1113 1114 1115 1116 1117 1118 1119 1120 Pasar tanpa bangunan permanen: Super market/pasar swalayan/toserba/mini market: Restoran/rumah makan: Warung/kedai makanan minuman: Toko/Warung kelontong: Hotel: Penginapan(hostel/motel/losmen/wisma): Bank Umum (Kantor Pusat/Cabang/Capem): a. Bank Perkreditan Rakyat (BPR Baru/PT. Bank Pasar/ PT. Bank Desa/dsj): b. ATM (Automatic Teller Machine/Anjungan Tunai Mandiri): Ada -1 Tidak
. km .. unit .. unit .. unit .. unit .. unit .. unit .. unit .. unit
.. unit -2
NO. 1121 Jumlah Koperasi: a. Koperasi Unit Desa:
RINCIAN ...... unit ...... unit .. unit .. unit .. unit
KODE
a. b. c. d.
b. Koperasi Industri Kecil dan Kerajinan Rakyat (Kopinkra): c. Koperasi Simpan Pinjam: d. Koperasi Non KUD lainnya:
1122 1123
Kantor Pegadaian:
Ada
-1
Tidak
-2
Lembaga keuangan mikro informal (LDKP/BKD/ LEPMM/BMT/kelompok simpan pinjam): Ada -1 Tidak -2
1124
Fasilitas perkreditan yang diterima penduduk/warga selama setahun terakhir: a. Kredit Ketahanan Pangan (KKP) Ada -1 Tidak b. Kredit Usaha Kecil (KUK) Ada -3 Tidak c. Kredit Pemilikan Rumah (KPR) Ada -5 Tidak d. Kredit lainnya: Ada -7 Tidak (Tuliskan) Bengkel/reparasi kendaraan bermotor (mobil/motor): Bengkel/reparasi alat-alat elektronik (Radio/Tape/TV/Kulkas/AC dll): Usaha foto kopi(photo copy): Biro/Agen perjalanan wisata (Tour and Travel): Tempat pangkas rambut (barber shop): Salon kecantikan/tata rias wajah/pengantin: Bengkel las (membuat pagar besi, tralis dll): Persewaan alat-alat pesta:
-2 -4 -6 -8
a. b. c. d.
1125 1126 1127 1128 1129 1130 1131 1132
.. unit .. unit .. unit .. unit ..... unit ..... unit ..... unit ..... unit
XII. POLITIK DAN KEAMANAN

NO. 1201 RINCIAN KODE
Tuliskan urutan 5 Partai yang memperoleh suara terbanyak untuk DPRD Kabupaten/Kota (khusus DKI Jakarta DPRD Provinsi) pada Pemilu 2004 Nama Partai (1) 1. 2. 3. 1. 2. 3. 4. 5. Nomor Partai (2) 1. 2. 3. 4. 5. Kepengurusan partai di tingkat desa/kelurahan Ada - 1 Tidak -2 (3)
4.
5. ....
10
NO.
RINCIAN
KODE
1202
a. Apakah pernah terjadi perkelahian massal selama setahun terakhir Ya -1 Tidak -2 R1204 b. Jika R1202a = 1, jumlah warga yang menjadi korban/kerugian materi akibat perkelahian massal: 1) 2) 3) Meninggal Luka-luka : : .. orang .. orang Rp.
Material (000 Rp.) :
1203
a. Jenis perkelahian massal yang paling sering terjadi selama setahun terakhir: Perkelahian antar kelompok warga -1 Perkelahian antar suku -4 -5 Perkelahian warga dengan aparat -2 Lainnya: keamanan (Tuliskan) Perkelahian pelajar/mahasiswa -3 b. Perkelahian massal yang terjadi selama setahun terakhir: Masalah baru -1 Masalah lama c. Perkelahian massal tersebut dapat diselesaikan secara damai: Ya -1 Tidak -2 -2 Aparat keamanan R1204 -3 d. Jika R1203c = 1, diselesaikan oleh: Masyarakat -1 Aparat desa -2
1204
a. Jenis kejahatan yang terjadi setahun terakhir Apakah ada kasus kejahatan: Ya -1 Tidak - 2 (1) 1. 2. 3. 4. 5. 6. 7. 8. 9. Pencurian Perampokan Penjarahan Penganiayaan/kekerasan Pembakaran Perkosaan Penyalahgunaan narkoba Peredaran gelap narkoba Pembunuhan 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. (Tuliskan) b. Jika R1204a Kolom (2) ada Kode 1, jenis kejahatan yang paling banyak kasusnya: . (2) Kecenderungan kejahatan dibanding satu tahun yang lalu Jika Kolom (2) =1 Menurun -1 Sama saja -2 Meningkat -3 (3) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Jenis kejahatan
10. Penjualan anak 11. Lainnya:
1205 1206
Kasus bunuh diri yang terjadi setahun terakhir:
Ya
-1
Tidak
-2
Upaya warga menjaga keamanan selama setahun terakhir a. b. c. d. e. Membangun pos keamanan lingkungan: Menambah jumlah anggota hansip/linmas: Memeriksa setiap warga dari luar desa yang masuk: Lainnya: (Tuliskan) Ya Ya Ya Ya -1 -3 -5 -7 -1 Tidak Tidak Tidak Tidak Tidak -2 -4 -6 -8 -2 a. b. c. d. e. Membentuk regu penjaga keamanan lingkungan: Ya
11
NO.
RINCIAN Jika Kolom (2) = 2 Sarana keamanan lingkungan (kamling) Ada -1 Tidak ada - 2
KODE
1207
Jarak terdekat (km)
(1) a. b. 1208 Pos hansip/kamling Pos polisi
(2)
(3)
Kemudahan untuk mencapai Sangat mudah - 1 Mudah -2 Sulit -3 Sangat sulit -4 (4)
, .. orang
Jumlah anggota hansip/linmas di desa/kelurahan ini:
XIII. KETERANGAN APARAT DESA/KELURAHAN Jika Kolom (2) = 1 Jenis Kelamin Laki-laki -1 Perempuan - 2 (4)
1301
Aparat Pemerintahan Desa/Kelurahan (1) a. Kepala Desa/Lurah b. Sekretaris Desa/Sekretaris Kelurahan c. Ketua BPD/Dewan Kelurahan d. Ketua LPMD/K *) Kode Pendidikan Belum/Tidak Tamat SD Tamat SD dan Sederajat SLTP dan Sederajat
Ada Tidak
-1 -2
Umur (3)
(2)
Pendidikan *) tertinggi yang ditamatkan (5)
-1 -2 -3
SM dan Sederajat Akademi/DIII Perguruan Tinggi
-4 -5 -6
1302
Sebutkan sumber data/nara sumber pada saat pencacahan: Kades/pamong desa -1 Pemuka Agama Kepala Sekolah/Guru -2 Dokter/Puskesmas Ketua BPD/Dekel -4 Lainnya: (Tuliskan)
-8 - 16 - 32
XIV. CATATAN
Semua pertanyaan/rincian mengacu pada situasi saat pencacahan, kecuali pada beberapa pertanyaan/rincian yang telah ditetapkan referensi waktunya 12

Rsni3: Pertukaran Data Lintang, Bujur, Dan Tinggi Lokasi Geografis

Uploaded by

Copyright:

Available Formats

Rsni3: Pertukaran Data Lintang, Bujur, Dan Tinggi Lokasi Geografis

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rsni3: Pertukaran Data Lintang, Bujur, Dan Tinggi Lokasi Geografis

Uploaded by

Copyright:

Available Formats

RSNI3

Standar Nasional Indonesia

Pertukaran data lintang, bujur, dan tinggi lokasi geografis

Badan Standardisasi Nasional

Pertukaran data lintang, bujur, dan tinggi lokasi geografis

1 Lingkup dan bidang aplikasi

Ketentuan penyajian lintang, bujur dan tinggi

Sistem referensi koordinat

derajat dan menit derajat, menit, dan desimal menit

derajat, menit, dan detik

derajat, menit, dan detik

derajat, menit, detik dan desimal detik

derajat, menit, detik dan desimal detik

derajat, desimal derajat, dan meter

derajat, menit, dan meter

derajat, menit, desimal menit, dan meter

derajat, menit, detik, dan meter

derajat, menit, detik, dan meter

derajat, menit, detik, desimal detik, dan meter

Daftar deviasi teknis

Pasal 3, Examples, point a) sampai n)

Tabel 1 dan Tabel 2

Content Standard for Digital Geospatial Metadata

Federal Geographic Data Committee

formally the American Society for Testing and Materials vi

Polar_Stereographic = Straight-Vertical_Longitude_from_Pole + [Standard_Parallel | Scale_Factor_at_Projection_Origin] + False_Easting + False_Northing

"RVC" "RVF" "SDTS" "SIF" "SLF" "TIFF" "TGRLN"

West Bounding Coordinate, 5

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

007 JELAMBAR BARU 050 TAMBORA 001 KALIANYAR

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

KECAMATAN DESA / KELURAHAN 080 KALI DERES 005 KAMAL

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

018 SUKAHARJA 081 CIGOMBONG 001 TUGU JAYA

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural

MASTER WILAYAH SKEMA 456 KABUPATEN/ KOTA (KEADAAN DESEMBER 2007)

Catatan: K/P adalah Klasifikasi urban/rural K = 1 = urban P = 2 = rural