5-Second Digital Theodolite w Vertical Tilt Sensor

Northern Tool Item# 377651 Item Weight: 20 lb(s)

Product Information: New The CST/Berger 5-second digital theodolite with vertical tilt sensor offers contractors the best solution for angle and alignment needs.

Offers contractors the best solution for angle and alignment needs Provides 5-second angular accuracy with a vertical tilt sensor that compensates for tilts in the vertical axis, providing for more accurate angle measurements Dual digital display with 6-key interface makes instrument easy to use Includes optical plummet that allows user to align directly over reference point Allows user to view data in vertical angle mode as well as percentage of grade Can turn angles in left or right direction 30X telescope with 53in. minimum focus; 1:100 stadia ratio Working range is 450ft. in radius Includes batteries, rain cover, tool kit, lens cloth and carrying case

Manufacturer: CST Berger MPN: 56-DGT10

Topcon DT-207 - 7" Digital Theodolite - NEW The DT-200 series integrates the same high-quality advanced absolute circle reading technology found in Topcon's high-performance total station products for more accurate field calculations; and they continue to deliver the highest quality optics and electronics you expect to find in Topcon theodolites. DT-200 Series Features: Long Battery Life Waterproof and Dustproof Digital Theodolites

Available in three affordable models delivering 5", 7", or 9" angle accuracy, there is a DT-200 theodolite perfect for any job. Like the DT-100 series, the DT-200 sereies weathers any wet or dust conditions in the field, allowing for a more productive day during inclement weather. All models are also compact and lightweight for easy portability; and their simple operation provides precise measurement in a functional, hassle-free package.

Specifications
Telescope 149 mm Length 45 mm Objective lens 30x power Magnification 130 Field of view Resolving power 2.5 power 90 cm Minimum focus 100 Stadia ratio 0 Stadia constant Sighting collimator Double Electronic Angle Measurement Absolute Reading Method 2 horizontal sides, 1 vertical sides Detecting Minimum reading 1"/5" arc seconds, 0.2mgon/1mgon mgon 5 arc seconds, 71mm Diameter Circle Accuracy Display 2 sides 7 segments LCD Data Output Serial signal connector RS-232C Compensator Vertical Tilt sensor Compensating range 3 ft Optical Plummet Telescope 3x power Magnification 3 degrees Field of view Level Sensitivity 40/2mm Plate level 10/2mm Circular level Water Protection IP66 rating Standard Power Supply 4AA batteries Battery Operating time Alk. 140 Hours Theodolite only Environmental Operating Temp -20 to +50 degrees C

Topcon DT-209 - 9" Digital Theodolite - USED

The DT-200 series integrates the same high-quality advanced absolute circle reading technology found in Topcon's high-performance total station products for more accurate field calculations; and they continue to deliver the highest quality optics and electronics you expect to find in Topcon theodolites. Available in three affordable models delivering 5", 7", or 9" angle accuracy, there is a DT-200 theodolite perfect for any job. Like the DT-100 series, the DT-200 series weathers any wet or dust conditions in the field, allowing for a more productive day during inclement weather. Degree of protection against water is based on the standard IEC60529, whose definition is "water projected in powerful jets against the enclosure from any direction shall have no harmful effects." All models are also compact and lightweight for easy portability; and their simple operation provides precise measurement in a functional, hassle-free package. The DT-200 series allows more than 140h of continuous measurement in the angle mode. This long battery life will eliminate the necessity for the replacement batteries on the job. *CA2224* Quick Specs: Telescope Length: 149mm Objective Lens: 40mm (1.6in) Magnification: 26X Image: Erect

David White Digital Transit/Theodolite

Northern Tool Item# 337677 Item Weight: 20 lb(s) This item ships directly from the factory. Estimated Delivery Time: 16 - 21 Business Days

**See shipping information below

Product Information: New The David White digital transit/theodolite offers an ideal solution for all angle alignment needs. It features 5second angular accuracy with a vertical tilt sensor that compensates for tilts in the vertical axis, ensuring accurate vertical measurements.

5-second angular accuracy with a vertical tilt sensor that compensates for tilts in vertical axis ensuring accurate vertical measurements Dual digital displays and simple 6-key interface make using the instrument simple Includes an optical plummet that allows user to align instrument directly over a reference point without using a plumb bob 30X telescope with minimum focus of 53in. Features 1:100 stadia ratio that allows user to quickly estimate distances in the field

Manufacturer: David White MPN: 46-8890

Sokkia Theodolite DT20C

Sokkia Electronic Construction Digital Theodolite built to work longer with low power Consumption and faster with an easy-to-use control panel. The DT Construction Series are electronic digital theodolites that combine ultra-low power consumption with Sokkias advanced absolute encoders. *730019* Specifications: Magnification: 26x Field of View: 130 (26 m/1,000 m) Minimum Focus: 3.0 ft. (0.9 m) from telescope center Stadia Multiplication Constant: 100 Angle Measurement: Photoelectric absolute encorder scanning, diametrical detection Display Unit: Degree/Gon/Mil, selectable Display Resolutions: 10"/20" Accuracy: (ISO 17123-3:2001) 20" Display: LCD, 8 digits x 2 lines with backlight Keyboard and Display: 4 Keys on One Face Right Angle Beep: Two Tone High/Low Every 90 Sensitivity Of Levels Plate Level: 60"/2 mm Sensitivity Of Levels Circular Level: 10'/2 mm Tribrach: Fixed, Integral Operating Temperature: -4 to +122F (-20 to +50C) Dust and Water Protection: IP66 (IEC 60529:1989) Weight With Handle: 9.3 lb (4.2 kg) Battery: 2 "C" Type Alkaline Batteries for Approx. 110 Working Hours Automatic Power Cut Off: Auto-off time is selectable from 5, 10, 15, 30 minutes or none.

Sokkia DT240 2" Electronic Digital Theodolite 730030

Package Includes: Sokkia DT240 Unit (Dual Display) Tribrach Lens Cap Tool pouch Plumb Bob Vinyl Cover Cleaning Cloth 4 AA Batteries User Manual Hard Carry Case Manufacturer's one Year warranty

Check out this link for an item brochure: DTx40_Datasheet_web.pdf Sokkia's Digital Theodolites ensure maximum job efficiency at unmatched performance levels. Sokkia's new theodolites feature superior optics, advanced absolute encoder systems, and proven automatic compensators. In addition to these essential technologies, the Sokkia DTx40 series boasts the industry's highest IP66 dust and water protection capability to withstand the harshest jobsite environments. Common Features for All Models:

2.5" - unsurpassed telescope resolving power* *except for the DT940L IP66 - industry's highest dust/water protection rating Absolute encoders Up to 170 hours of operating timeExclusive Features for the Laser Models: 200m (660ft) - long-range laser pointer

0.4mm@10m - ultra-small beam spot

Sokkia's Digital Theodolites allow you to survey with ease using the absolute encoders new algorithm that operates with remarkably reduced power consumption. When the instrument is restarted, the azimuth is automatically restored to save time on the job site. A large LCD screen provides clear angle reading under all conditions, and thanks to simple 4-key operation, no training is required Variety of display modes You can select the angle display unit that best suits you. Horizontal angle is switchable between clockwise and counterclockwise, and angle hold and 0-set functions are also provided. Vertical angle can be set to Zenith=0, Horizontal=0, Horizontal=0+/-, or % of slope. Enhanced reliability with absolute encoders Sokkia's market-proven advanced absolute encoders, which utilize RAB (RAndom Bidirectional) code and digital sampling technology, further enhance the reliability of angle measurement. DT240 guarantees 2" accuracy for both horizontal and vertical angles. Ultra-long working hours With Sokkia's new algorithm in operating absolute encoders, power consumption has been dramatically reduced. Powered by 4 standard AA alkaline batteries, the DT240 will operate for 75 hours. One-key Start You can start taking measurements as soon as you turn on the power, thanks to the absolute encoders. Moreover, azimuth is kept when restarting the instrument after turning off the power. Easy-to-read, easy-to-use control panels A large LCD screen provides clear angle readings under all conditions, and thanks to simple 4-key operation no training is required. The DT240 has control panels on both faces for added convenience. Dual-axis compensator The DT240 automatically compensates both vertical and horizontal angles by monitoring the tilt of the instrument in X & Y two directions. Audible right-angle notification Once the zero (0) horizontal angle direction is determined, all models emit audible tones for each of the four right-angle directions. Specifically, it sounds two different tones within +/-15 degrees of 90 degrees and stops beeping when it comes within +/-1 degree. Superior IP66 protection Complying with the tough IP66 standard for resistance to dust and water, both models offer superior dependability even under harsh environmental conditions. RS-232C port Measurement data can be output to external devices via the RS-232C data port. The DT240 Includes: Four AA alkaline batteries, lens cap, lens hood, plumb bob, tool kit, operator's manual, carrying case, and shoulder strap.

Specifications * * * * * * * * * * Telescope Magnification: 30X Display Resolution (selectable) H & V: 1"/5",0.2/1mg, 0.005/0.02mil Accuracy (ISO 12857-2 1997): 2" Display: LCD, 8 digits x 2 lines w/backlight Display location: On both faces Compensator: Dual-axis compensator, working range 3" (55 mgon) Dust and water protection: IP66 (IEC60529) Weight with handle and battery: 4.7kg (10.3lb.) Battery: LR14/C batteries x2 Continuous use with alkaline batteries: Approx. 75 hours

Leica Builder 109 is replacing the T100 9" Theodolite Item Includes: Builder 109 Theodolite, 9"" accuracy Laser plummet Tribrach Battery adapter Lion Battery Charger User Manual Manufacturers Warranty

Click the link for an item brochure: http://www.leicageosystems.com/downloads123/zz/tps/BuilderSeries/brochures/Leica_Builder_Series_Broch ure_us.pdf Leica Builder 109 is replacing the T100 9" Theodolite The era of purely mechanical or optical instruments is over. This is the digital era where digital instruments are needed to remain competitive. The digital Builder leads the way in this new era. With the Leica Builder, Leica Geosystems is aiming experts in the building sector who have up to now shied away from using professional measuring instruments. In the design priority of making the theodolite as easy-to-use as possible, the advantages and the added value of the Leica Builder become evident: its uniquely easy-to-operate control concept and the outstanding product performance accelerates common construction site jobs, e.g. layout or plumbing. Built for Builders The rugged Builder stands up to the elements and takes all kinds of weather. And yet its easily to transport in the carry case that holds most accessories in a single lightweight package.

Accelerates Building Traditional layouts require many steps and manipulations. The Builder reduces these steps. The Builder R gives an added advantage with fewer set-ups and laseraided layouts.

Functions of the Builder 109 Set angles V display in degrees or as percentage of inclination Sector Beep signals right angles Hz display clockwise or counter clockwise Checks level positioning with the graphic levelling aid

Key Features of the Leica Builder 109: The Leica Builder is the only theodolite offering a complete product family. It is easy for a user to switch between models without learning a new operation. Absolute circle reading Excellent hardware features, such as laser plummet, endless drives on both sides for Hz and V, brilliant optics with 30x magnification Dual-Axis compensation for reliable Hz and V reading New and intuitive software Unique leveling guidance for fast and convenient setup High resolution LCD display Audible notice for 90 turns

Leica Builder 100 - if you need to trust angles and alignments. With a laser plummet for simple and fast setup over control line, dual axis compensation for accurate plumbing, endless drives eliminating steps, audible notice for 90 turns, graphical leveling aid for fast and convenient setup and IP55 rating, the Leica Builder 100 is an outstanding theodolite. Unique Features of the Leica Builder 100 Multiligual function If you have a crew that speak different languages then the Leica Builder 100 is the ideal theodolite for you. The Leica Builder is the only instrument in its class that comes with multiple languages on-board. Switching between languages is quick and simple with only one keystroke improving convenience and efficiency. 3 Languages can be displayed at the same time on the Builder.

direct.dxf With Direct.dxf functionality, data can be read directly from the instrument in dxf-format and read into AutoCAD on a PC without any intermediate steps. Coordinates and point numbers can be stored in different layers. Theft protection The Leica Builder 100 comes with a PIN-code feature to prevent unauthorised persons from using the instrument. This increases your data security. Without correct code, the equipment cannot be operated, data erased and makes it unattractive to steal. This protects you from having damages, increases your safety and possibly lowers your safety rates. Technical Data: Builder Specifications Leica Builder 100 Leica Builder 200 Leica Builder 300 Leica Builder 400 Leica Builder 500 X X X X X X

Full Power Site Software Wireless Communication Prism Measurement Mode Full alphanumeric keyboard Volumes Calculation Data Im/Export to USB Stick PC/Handheld Interface Laser Distance Measure Control Line Setup 3 Languages Leveling Aid Dual Axis Compensator Laser Plummet X X X X X X X X X X X X X

X X

X X

X X X X X X X

X X X X X X X

X X X X X X X

Li-Ion Batteries Internal Memory [points] Angular Accuracy Distance without reflector (90% reflective) Distance to reflective tape (60mm x 60mm) Distance to glass prism

X 9'', 6'' -

X 9'', 6'' 80 m

X 15'000 9'', 6'' 120 m

X 50'000 9'', 5'' 15 m

X 50'000 9'', 5'', 3'' 250 m

250 m

250 m

15 m

250 m

500 (3500) 500 (3500) m m

NIKON DTM-352 TOTAL STATION GEO SURVEYING THEODOLITE ITEM DESCRIPTION Nikon DTM352 with 10,000 points internal memory
Remarkably easy to use and offers a variety of useful software functions such as:2 point Reference line / Arc RDM (Remote Distance Measurement) REM (Remote Elevation Measurement) Vertical and slope Plane Area Calculation Offset measurement Stake out and Traverse COGO and Intersection Calculating and inputting coordinates Distance measurement: Minimum read out 1mm/0.01ft Accuracy 3mm Range to single prism 2300m/7450ft Tracking or fine mode Angle measurement: Minimum read out 1" Accuracy 5 " second Dual axis electronic compensator selectable on/off Selectable between degrees or gon / distance meter or feet Data port RS232C interface

Sale includes: Nikon DTM 352 1x Tribrach 1x battery 1x charger Copy of user manual Calibration certificate

Nikon NE-20S Digital Electronic Theodolite Information about the unit from manufacturer:
Specifications for NE 20S Electronic Theodolite
Nikon's high quality telescope assures sharp, clear images every time. Dual-line LCD display with battery power indicator and simplified keyboard. Initial setting of vertical angle to zero is a snap: simply rotate the telescope through the horizontal line; no need for a telescope vial. Fast right angle aiming (90/100 G/1600 MIL) made easy with beep sound indicator. Powered by six AA [R6]-type penlight batteries available everywhere.

Key Features for NE 20S Electronic Theodolite

Telescope: Magnification 26x; Stadia multiplying constant 1:100 Angle measurement: Display 20" Accuracy DIM18723 10" Power source: Type AA (R6)-type battery AA; Continuous operating time approx. 28 hours (with manganese battery), approx. 70 hours (with alkaline-manganese battery) Weight: Instrument 3.8kg (8.38 lbs.)