Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Msds

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

Page 1/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 * Reviewed on 09/05/2011

1 Identification of the substance/mixture and of the company/undertaking


Product identifier Trade name: Resin solution X 50 Article number: 1234567890 Application of the substance / the preparation Raw material for resins Details of the supplier of the safety data sheet Manufacturer/Supplier: Chemix GmbH Chemixstrae 17 A-5020 Salzburg Information department: Product safety department Emergency telephone number: During normal opening times: environment protection department, Ext 123 at other times: factory fire brigade, Ext 222

Tel.: 0043/662/21 22 23

2 Hazards identification
Classification of the substance or mixture GHS02 Flame H226 Flammable liquid and vapour. GHS08 Health hazard H361 H373 Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. GHS09 Environment H411 Toxic to aquatic life with long lasting effects. GHS07 H315 H319 H317 H336 Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Harmful Harmful: danger of serious damage to health by prolonged exposure through inhalation. Possible risk of harm to the unborn child. Irritant Irritating to eyes and skin. May cause sensitisation by skin contact.
(Contd. on page 2)
USA

Classification according to Directive 67/548/EEC or Directive 1999/45/EC

DR

Page 2/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 1)

Reviewed on 09/05/2011

Dangerous for the environment Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Vapours may cause drowsiness and dizziness. Information concerning particular hazards for human and environment: The product has to be labelled due to the calculation procedure of international guidelines. Classification system: The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data. Label elements GHS label elements The product is classified and labelled according to the Globally Harmonized System (GHS). Hazard pictograms

GHS02

GHS07

GHS08

GHS09

Signal word Warning Hazard-determining components of labelling: reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight 700) toluene Hazard statements Flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Suspected of damaging fertility or the unborn child. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects. Precautionary statements If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use explosion-proof electrical/ventilating/lighting/equipment. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.
(Contd. on page 3)
USA

DR

Page 3/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 2)

Reviewed on 09/05/2011

Classification system: NFPA ratings (scale 0 - 4)

0
*2 3

Health = 2 Fire = 3 Reactivity = 0

HMIS-ratings (scale 0 - 4)
HEALTH FIRE

REACTIVITY 0

Health = *2 Fire = 3 Reactivity = 0

Other hazards Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable.

3 Composition/information on ingredients
Chemical characterization: Mixtures Description: Mixture of the substances listed below with nonhazardous additions. Dangerous components: 25068-38-6 reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight 700) H411; H315; H319; H317 108-88-3 toluene H225; H361; H373; H304; H315; H336 141-78-6 ethyl acetate H225; H319; H336 78-92-2 butanol H226; H319; H335+H336 67-63-0 propan-2-ol H225; H319; H336

25-50%

10-25% 10-25% 2.5-10% 2.5-10%

4 First aid measures


Description of first aid measures General information: Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. After inhalation: Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation. After skin contact: Immediately wash with water and soap and rinse thoroughly. After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. After swallowing: If symptoms persist consult doctor.
(Contd. on page 4)
USA

DR

Page 4/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 3)

Reviewed on 09/05/2011

Information for doctor: Most important symptoms and effects, both acute and delayed No further relevant information available. Indication of any immediate medical attention and special treatment needed No further relevant information available. *

5 Firefighting measures
Extinguishing media Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Special hazards arising from the substance or mixture No further relevant information available. Advice for firefighters Protective equipment: No special measures required.

6 Accidental release measures


Personal precautions, protective equipment and emergency procedures Wear protective equipment. Keep unprotected persons away. Environmental precautions: Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation. Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information.

7 Handling and storage


Handling: Precautions for safe handling Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Information about protection against explosions and fires: Do not spray on a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles: No special requirements. Information about storage in one common storage facility: Not required. Further information about storage conditions: Keep receptacle tightly sealed.
(Contd. on page 5)
USA

DR

Page 5/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 4)

Reviewed on 09/05/2011

Specific end use(s) No further relevant information available. *

8 Exposure controls/personal protection


Additional information about design of technical systems: No further data; see item 7. Control parameters Components with limit values that require monitoring at the workplace: 108-88-3 toluene PEL Short-term value: C 300; 500* ppm Long-term value: 200 ppm *10-min peak per 8-hr shift REL Short-term value: 560 mg/m, 150 ppm Long-term value: 375 mg/m, 100 ppm TLV (188) NIC-75 mg/m, (50) NIC-20 ppm (Skin); (BEI) 141-78-6 ethyl acetate PEL 1400 mg/m, 400 ppm REL 1400 mg/m, 400 ppm TLV 1440 mg/m, 400 ppm 78-92-2 butanol PEL 450 mg/m, 150 ppm REL Short-term value: 455 mg/m, 150 ppm Long-term value: 305 mg/m, 100 ppm TLV 300 mg/m, 100 ppm 67-63-0 propan-2-ol PEL 980 mg/m, 400 ppm REL Short-term value: 1225 mg/m, 500 ppm Long-term value: 980 mg/m, 400 ppm TLV Short-term value: 984 mg/m, 400 ppm Long-term value: 492 mg/m, 200 ppm BEI Additional information: The lists that were valid during the creation were used as basis. Exposure controls Personal protective equipment: General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin. Breathing equipment: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
(Contd. on page 6)
USA

DR

Page 6/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 5)

Reviewed on 09/05/2011

Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection: Tightly sealed goggles

9 Physical and chemical properties


Information on basic physical and chemical properties General Information Appearance: Fluid Form: According to product specification Color: Characteristic Odor: Not determined. Odour threshold: pH-value: Change in condition Melting point/Melting range: Boiling point/Boiling range: Flash point: Flammability (solid, gaseous): Ignition temperature: Decomposition temperature: Auto igniting: Danger of explosion: Not determined. Undetermined. 77C (171 F) 26C (79 F) Not applicable. 390C (734 F) Not determined. Product is not selfigniting. Product is not explosive. However, formation of explosive air/vapor mixtures are possible.
(Contd. on page 7)
USA

DR

Page 7/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 6)

Reviewed on 09/05/2011

Explosion limits: Lower: Upper: Vapor pressure at 20C (68 F): Density: Relative density Vapour density Evaporation rate Solubility in / Miscibility with Water: Viscosity: Dynamic: Kinematic: Solvent content: Organic solvents: VOC content: Solids content: Other information

1.2 Vol % 11.5 Vol % 97 hPa (73 mm Hg) Not determined. Not determined. Not determined. Not determined. Not miscible or difficult to mix.

Segregation coefficient (n-octonol/water): Not determined. Not determined. Not determined. 50.0 % 50.0 % 50.0 % No further relevant information available.

10 Stability and reactivity


Reactivity Chemical stability Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. Possibility of hazardous reactions No dangerous reactions known. Conditions to avoid No further relevant information available. Incompatible materials: No further relevant information available. Hazardous decomposition products: No dangerous decomposition products known.

11 Toxicological information
Information on toxicological effects Acute toxicity: LD/LC50 values that are relevant for classification: 108-88-3 toluene Oral LD50 5000 mg/kg (rat) Dermal LD50 12124 mg/kg (rabbit) Inhalative LC50/4 h 5320 mg/l (mouse) Primary irritant effect: on the skin: Irritant to skin and mucous membranes. on the eye: Irritating effect.
(Contd. on page 8)
USA

DR

Page 8/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 7)

Reviewed on 09/05/2011

Sensitization: Sensitization possible through skin contact. Additional toxicological information: The product shows the following dangers according to internally approved calculation methods for preparations: Irritant *

12 Ecological information
Toxicity Acquatic toxicity: No further relevant information available. Persistence and degradability No further relevant information available. Behavior in environmental systems: Bioaccumulative potential No further relevant information available. Mobility in soil No further relevant information available. Ecotoxical effects: Remark: Toxic for fish Additional ecological information: General notes: Water hazard class 2 (Self-assessment): hazardous for water Do not allow product to reach ground water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground. Also poisonous for fish and plankton in water bodies. Toxic for aquatic organisms Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable. Other adverse effects No further relevant information available.

13 Disposal considerations
Waste treatment methods Recommendation: Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Uncleaned packagings: Recommendation: Disposal must be made according to official regulations. *

14 Transport information
UN-Number DOT, ADR, IMDG, IATA UN proper shipping name IMDG, IATA UN1866 RESIN SOLUTION
(Contd. on page 9)
USA

DR

Page 9/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 8)

Reviewed on 09/05/2011

Transport hazard class(es) DOT, IMDG, IATA

Class Label ADR

3 Flammable liquids. 3

Class Label Packing group DOT, ADR, IMDG, IATA Environmental hazards: Marine pollutant: Special marking (ADR): Special precautions for user Danger code (Kemler): EMS Number:

3 Flammable liquids 3 III No Symbol (fish and tree) Warning: Flammable liquids 30 F-E,S-E

Transport in bulk according to Annex II of Not applicable. MARPOL73/78 and the IBC Code UN "Model Regulation": UN1263; PAINT; 3; III

15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture Sara Section 355 (extremely hazardous substances): None of the ingredients is listed. Section 313 (Specific toxic chemical listings): 108-88-3 toluene 78-92-2 butanol 67-63-0 propan-2-ol TSCA (Toxic Substances Control Act): All ingredients are listed.
(Contd. on page 10)
USA

DR

Page 10/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 9)

Reviewed on 09/05/2011

Proposition 65 Chemicals known to cause cancer: None of the ingredients is listed. Chemicals known to cause reproductive toxicity for females: 108-88-3 toluene Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed. Chemicals known to cause developmental toxicity: 108-88-3 toluene Carcinogenic categories EPA (Environmental Protection Agency) 108-88-3 toluene IARC (International Agency for Research on Cancer) 108-88-3 toluene 67-63-0 propan-2-ol NTP (National Toxicology Program) None of the ingredients is listed. TLV (Threshold Limit Value established by ACGIH) 108-88-3 toluene 67-63-0 propan-2-ol NIOSH-Ca (National Institute for Occupational Safety and Health) None of the ingredients is listed. OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients is listed. GHS label elements The product is classified and labelled according to the Globally Harmonized System (GHS). Hazard pictograms A4 A4

II 3 3

GHS02

GHS07

GHS08

GHS09

Signal word Warning Hazard-determining components of labelling: reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight 700) toluene Hazard statements Flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Suspected of damaging fertility or the unborn child. May cause drowsiness or dizziness.
(Contd. on page 11)
USA

DR

Page 11/11

Material Safety Data Sheet


acc. to ISO/DIS 11014
Printing date 09/05/2011 Trade name: Resin solution X 50
(Contd. of page 10)

Reviewed on 09/05/2011

May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects. Precautionary statements If medical advice is needed, have product container or label at hand. Keep out of reach of children. Read label before use. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use explosion-proof electrical/ventilating/lighting/equipment. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations. Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Department issuing MSDS: Environment protection department. Contact: Dr. Peter Mayer Abbreviations and acronyms:
ADR: Accord europen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) RID: Rglement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the International Transport of Dangerous Goods by Rail) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association ICAO: International Civil Aviation Organization ACGIH: American Conference of Governmental Industrial Hygienists NFPA: National Fire Protection Association (USA) HMIS: Hazardous Materials Identification System (USA) VOC: Volatile Organic Compounds (USA, EU) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent

* Data compared to the previous version altered.


USA

DR

You might also like