Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Smart Tv Quick Setup Guide: (SI Guide-NA) BN68-04374A-04Eng.indd 1 2012-03-03 오후 2:18:04

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

SMART TV QUICK SETUP GUIDE

Smart Touch Control


Improved user convenience has been provided so that you can switch the channel and adjust the volume with just your fingertips while focusing on the TV screen. In addition, the built-in touch pad removes the need for a mouse when you change the menu settings and search for something on the Internet. % For more detailed information about using the Smart Touch Control, refer to Smart Touch Control Guide ( Support Smart Touch Control Guide). % Voice Control performance levels will vary based on the language spoken. % Install the IR Blaster within 50 cm and 45 degrees in up, down, left and right from the IR sensor of the external device. You can use MIC to instruct a Voice Control command. To activate MIC, simply press the VOICE button. Turns the TV on and off. : Displays a list of recently used functions.
TV STB BD TV STB BD

LED to show the active device. Shows the color button, exit button and play control buttons.

y: Adjusts the Volume.

T: Quickly select frequently used functions. z: Changes channels. Touch Pad


Scratch on the Touch Pad to move the focus on the screen. Click on the Touch Pad to run the focused item. Tap on the Touch Pad and hold to select the function the same as the MUTEM button of the remote control. However, this action scrolls the page on a Web Browser. Tap on the Touch Pad or press the RETURNR button to return to the normal state.

Displays the shortcut functions list. RETURNR: Go to previous menu screen. VOICE: Take your voice command and enter a text using your voice. NUMBER: Displays the Number button screen. Select a digit using the touch pad.

RETURN

VOICE

NUMBER

Brings up the Smart Hub applications.

% If no button is pressed for 30 seconds, the Touch Pad is automatically turned off. % To use the Touch Pad again, press any button.

Installing batteries (Battery size : AA) 1 Press the back of the remote at the very bottom with both thumbs, and then slide the battery cover up in the direction of the arrow. 2 Install two batteries so that the polarity of the batteries (+/-) matches the illustration in the battery compartment. 3 Slide the cover down in the direction of the arrow to close the battery cover. Initial Pairing 1 Press any buttons on the Smart Touch Control toward the Remote receiver of TVs. 2 The connection icons appear on the bottom left of the screen, and the TV connects to your Smart Touch Control automatically. % If you want to perform the pairing process again, press the PAIRING button in the center of the back cover. The Smart Touch Control will be initialized.

English - 2

SMART Interaction (Voice and Motion Control)


Using this function, you can access and control menu options and functions using speech or motions. % For more detailed information about Smart Interaction, see Smart Interaction in e-Manual or User manual. % The illustration of the manual may vary from the actual shape partially. Voice Control Environment
We are recommended using Voice Control function within about 13 ft with your TV. You can check the usable distance by using Voice Control Environment Test (System Voice and Motion Control Voice Control Voice Control Environment Test). Voice Control function can be affected recognition by unclear pronunciation, voice level, or surrounding noise.

Motion Control Environment


We are recommended using Motion Control function within about 5 - 13 ft with your TV. TV Cameras recognition range may differ depending on the angle of camera or other conditions. You can check the recognition range of TV camera by using Motion Control Environment Test (System Voice and Motion Control Motion Control Motion Control Environment Test).

Voice Control
You can use only your voice to switch the channel or adjust the volume level while focusing on the TV screen, which removes the need for the conventional remote control.

Menu System Voice and Motion Control Voice Control


1 Set Voice Control to On. 2 If you set Trigger Words to Hi TV, say Hi TV, and then basic available commands such as TV Power Off are displayed on the screen. 3 To adjust the volume, simply say Volume up or Volume down. 4 To see more commands, say More Commands.

HI TV. TV Power Off.

More Commands Channel Number Channel Up/ Down

TV Power Off

Source

Volume Up/ Down

Mute More Commands

% You can select the Trigger Words that start the Voice Control function. Alternatively you can turn on your TV using the Trigger Words if Voice Control function is set to On. If the Trigger Words is set to Hi TV, say Hi TV Power On. If the Trigger Words is set to Smart TV, say Smart TV Power On.

Motion Control
Use a specific motion to switch the channel or adjust the volume level as well as to move the mouse pointer to a desired position while in web surfing with Smart Hub.

Menu System Voice and Motion Control Motion Control


1 Set Motion Control to On. 2 TYou use the Motion Control, raise your hand unfolding it toward the screen, hold it for a moment and then wave it 3~4 times to the left and right. Motion Control starts. If the Motion Control starts, the cursor is displayed at the center of the screen and the Motion Guide Bar is at the bottom of the screen. 3 To switch the channel, point your hand to the channel up or down icon on the screen, and make a fist. If you hold the Run motion at the channel icon position, the channel will be changed continuously.

All

Pointing Navigation

Run

% Motion Control function can be affected recognition by users location, motion posture, or ambient brightness conditions. % If it doesnt work, adjust the angle of TV camera by using Motion Control Environment Test (System Voice and Motion Control Motion Control Motion Control Environment Test). English - 3

Smart Hub
Using Smart Hub, you can stream movies, videos, and music from the Internet, access various for pay or free of-charge applications and view them on your TV. Application content includes news, sports, weather forecasts, stock market quotes, maps, photos, and games. For more detailed information about Smart Hub, see Smart Hub in e-Manual. % The illustration of the manual may vary from the actual shape partially. Method 1 Method 2

Menu Support Smart Hub


Press the button on the remote control.

Main Features
You can search for various types of content that can be used on your TV. Displays the current input source screen. You can experience various service provided by Samsung.
Channel Web Browser Schedule Manager Source AllShare Play

Displays the recommended service by Samsung.


Search

AccuWeather BBC News

Youtube

Skype

Picasa

Displays notices, new applications, and advertisements brought to you by Samsung product introductions. Displays the installed applications in the TV. Operation button

a Log In b Wallpaper T Tools R Return

The displayed image may differ depending on the model.

Creating Your Samsung Account


If you have Samsung account, you can use Smart Hub easily.
Login What is Samsung Account? A Samsung Account is an integrated membership account that lets you access all the services provided by Samsung through a single registered account. Samsung account Password Press [Enter] Press [Enter] Remember my password Sign me in automatically Login Face recognition Mode Cancel Create Account R Return

1 Press the button on the remote control, Press the red a button on the remote control to display the Login window. % When using the Smart Touch Control, press the ReturnR button to close the button screen and use. 2 When the Login window appears, select the Create Account button. 3 Move to the Samsung account field, and then press the E button. A window appears with an entry screen and a keypad. The ID must be a valid e-mail address in the following format: sample@sample.com or sample@sample.net. The same password in the confirm password field in the same fashion. % If you have a Bluetooth or USB keyboard connected to the TV, enter your e-mail address using a Bluetooth or USB keyboard. When done, enter the password in the same way. 4 After entering all items, move to the Create Account item, and then the E button. Your account will be created.

Downloading an app from Samsung Apps


Samsung Apps is a store from which you can download applications to use on Samsung TV/AV equipment.
Search

AccuWeather BBC News

Youtube

Skype

Picasa

Channel

Web Browser

Schedule Manager

Source

1 Press the button on the remote control, and select Samsung Apps on the screen. 2 Go to your desired category, and select an app. 3 In the information screen for the selected app that appears, choose Download to install it. 4 After it is downloaded, choose Run to launch and enjoy it. % You can find the icon of the newly installed app on the SMART HUB screen. % Paid App in Samsung Apps Account registration is required.

BN68-04374A-04

English - 4

You might also like