Sika Raintite: Acrylic Waterproofing

Technical Data Sheet Edition 4, 2011 Identification no. 02 07 02 01 001 0 000032 Version no.
0010 Sika RainTite
Sika RainTite
Acrylic Waterproofing
Description Sika RainTite waterproofing system consists of a combination of : Sika RainTite Waterproofing Compound Highly flexible UV resistant acrylic emulsion Sika RainTite Membrane Non-woven polyester membrane The system forms a fully bonded, durable, flexible waterproofing membrane Uses Concrete flat roofs Finishing Sealing joints, laps and roofing screws on various kind of roofs (roof tile, asbestos, zinc) Parapet walls External walls External weather & UV resistant Easy to use and apply No priming Excellent adhesion to most surfaces High flexibility Thixotropic Non toxic Will not promote fungal growth Without Membrane Consumption : 0.6 - 0.7 kg/m2 With Membrane Consumption : 2 - 2.4 kg/m2 Total Thickness 1 - 1.20 mm (cured system with membrane)

Construction
Advantages
Coverage
Technical Data
Colour Drying Time Tensile Strength Tear Strength Elongation at Break Fire Index Flammability Accelerated Weathering Toxicity Transparent, White, Cream, Grey, Pebble Grey, Stone Grey, Green and Coro Red. 2-3 hours depending upon ambient conditions 15.2 MPa 56 N/mm 27% 0.4 class 2 No serious effect after 3.000 hours Non toxic
Sika RainTite
1/2
Shelf Life Packaging
1 year when unopened and stored properly Protect from direct sunlight 10 m x 1 m roll membrane 1 kg, 4 kg, 20 kg pail waterproofing compound
Instruction for Use

Surface Preparation
Surface must be clean, sound and properly cured. Remove all loose materials mechanically, preferably with a wire brush. Iron and steel surfaces should be free of rust. Without Membrane : 2 Sika RainTite is applied in two coats (0.3 - 0.35 kg/m / coat), by brush or roller. With Membrane : 2 1. Apply a generous base coat (0.8 - 1 kg/m ) of Sika RainTite Waterproofing Compound by brush or roller. 2. Embed the Sika RainTite Membrane into the base coat while it is still wet. Ensure that the membrane is thoroughly embedded and smooth out all air pockets and creases. Overlaps of adjacent membrane must be a minimum of 50 mm. 3. Immediately apply a second coat (0.8 - 1 kg/m ) of Sika Rain Tile Waterproofing Compound while the base coat is still wet, to fully saturate the membrane from both sides. 4. When touch-dry, apply a final top coat (~ 0.4 kg/m ) to complete the application. Protect from rain until dry.
2 2
Application
Construction
Cleaning Limitations
Remove uncured surface Sika RainTite with water. Cured material can only be removed mechanically. Ambient and surface temperatures must be between 5oC and 35oC during application. Do not attempt application if rain is imminent It is not recommended to apply screed mortar on top of Sika Raintite Avoid ponding water on top of Sika Raintite Avoid contact with skin and eyes Wear protective gloves and eye protection during work If skin contact occurs, wash skin thoroughly If in eyes, hold eyes open, flood with warm water and seek medical attention without delay.
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sikas current knowledge and experience of the product when properly stored, handled and applied under normal conditions in accordances with Sikas recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Handling Precautions
Legal Notes
PT. Sika Indonesia Jl. Raya Cibinong- Bekasi km. 20 Limusnunggal- Cileungsi BOGOR 16820 - Indonesia Tel. +62 21 8230025 Fax +62 21 8230026 Website : www.sika.co. id e-mail: sikacare@id.sika.com
Branches Surabaya : Komp. Pergudangan Meiko Abadi III Blok B-52 & B-53, Betro, Gedangan, Sidoarjo 61254 Tel : 031-8911333; Fax : 031-8916333 Medan : Jl. Pancing / Jl. Willem Iskandar No.66 B, Kec. Medan Tembung Tel : 061- 6619500; Fax : (061) 6619400 Batam : Jl. Laksamana Bintan, Komp. Bumi Riau Makmur Blok E No.3, Sungai Panas Tel : (0778) 424928; Fax : (0778) 450189
Sika RainTite
2/2

Sika Raintite: Acrylic Waterproofing

Uploaded by

Copyright:

Available Formats

Sika Raintite: Acrylic Waterproofing

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sika Raintite: Acrylic Waterproofing

Uploaded by

Copyright:

Available Formats

Technical Data Sheet Edition 4, 2011 Identification no. 02 07 02 01 001 0 000032 Version no.

0010 Sika RainTite

Shelf Life Packaging

Instruction for Use

You might also like