CONSTRUCTING LANDSCAPE

ASTRID ZIMMERMANN (ED.)

MATERIALS, TECHNIQUES, STRUCTURAL COMPONENTS

2. EDITION

CONSTRUCTING LANDSCAPE
INTRODUCTION CONSTRUCTING LANDSCAPE, Essay by Cordula Loidl-Reisch

7 9

1 MATERIALS 1.1 SOIL Components, properties, classification Bulk material Soil protection Testing and assessing foundation soil PLANTS Plant propagation Woody plants Herbaceous plants (including grasses and ferns) Bulbs and tubers (geophytes) Bedding and tub plants
LAWNS AND OTHER SEEDED AREAS

1.2

1.3

Lawns Crushed stone lawn/checker brick lawn Meadows Intermediate planting 1.4
WOOD Composition, properties and timber preservation Products Surface qualities Joints

1.5

CUT STONE

Properties and products Surface properties and treatment Jointing and shaping 1.6
BRICK AND CLINKER

Composition, properties, products Surface qualities and surface treatment Laying and shaping 1.7
CONCRETE

1.8

Composition, properties, products Surface qualities and surface treatment Joining and molding METALS Iron and steel Aluminum Copper Zinc/titanium zinc
OTHER BUILDING MATERIALS

15 15 20 24 24 29 29 30 35 37 37 43 43 46 47 48 53 53 60 61 62 67 68 72 75 79 79 86 90 95 95 99 100 105 106 117 118 118 123 123 128 131

1.9

Plastics Bitumen and asphalt Glass

2 THE PRINCIPLES OF LOADBEARING STRUCTURES 2.1 LOADBEARING STRUCTURES AND THEIR DIMENSIONS Fundamentals of structural component dimensioning Assumed loads Choice of system Choice of materials Choice of cross-section Stiffening 2.2 FOUNDATIONS The principles of soil mechanics Principal foundation types 2.3 CONNECTIONS Timber connections Steel connections Concrete connections Connections between different materials 3 STRUCTURAL ELEMENTS AND BUILDING METHODS 3.1 GROUND MODELING AND EARTHWORKS 199 Terrain modeling Securing earthworks Specimen projects 3.2 PATHS AND SQUARES Hard surfacesterminology Building ground Pavement Construction methods for surface courses Borders Specimen projects 3.3 STEPS Outdoor steps Construction methods Ramps Specimen projects 3.4 RAILINGS AND FENCES General requirements Construction methods Specimen projects 3.5 WALLS Principles Freestanding walls Retaining walls Nonstable construction methods Stable construction methods Specimen projects 3.6 SMALL STRUCTURES AND PERGOLAS Construction and use of materials for small structures Construction and use of materials for pergolas Specimen projects 3.7 SMALL BRIDGES General structure of a bridge Bridge support structures Specimen projects 3.8 WALKWAYS AND DECKS General essentials Foundation Substructure/support construction Covering Specimen projects

137 137 143 144 147 151 154 159 159 167 173 173 180 184 191

199 202 208 215 215 215 216 219 231 233 243 243 245 257 258 267 267 269 281 295 295 295 296 300 302 314 327 327 334 336 347 347 347 350 357 357 358 359 359 361

3.9

PLANTING TECHNIQUE AND CARE OF VEGETATION SURFACES Basics of plant growth Planting woody plants Planting and maintenance of herbaceous plants Planting and maintenance of geophytes Seasonal ornamental plants Specimen projects
LAWNS AND MEADOWS: LAYING OUT AND CARE

3.10

Lawns Meadows Seeding ornamental annuals Specimen projects 3.11

SURFACE DRAINAGE

3.12

Creating slopes Construction methods for drainage systems Basic calculations and parameters Specimen projects WATER INSTALLATIONS General building methods and choice of location Construction methods Planting pools and ponds Specimen projects
VERTICAL PLANTING

3.13

Creative aims Structures and attachment modes for trellis climbers Construction requirements Loads Problems with climbing plants Maintenance and checking Specimen project 3.14
GREEN ROOFS

Forms of green roof Construction requirements and constructive elements Designs and layers in green roofs Greening methods Implementing a green roof Specimen projects 3.15
SPECIAL ELEMENTS

Lighting elements Play and sports elements Specimen projects Seating elements Specimen projects APPENDIX LITERATURE, STANDARDS AND DIRECTIVES, ADDITIONAL INFORMATION PICTURE CREDITS INDEX

369 369 372 378 379 379 380 389 389 392 393 494 399 399 404 411 414 421 421 422 428 432 445 447 451 451 452 452 452 453 457 457 459 464 466 468 471 479 479 482 485 490 491

503 519 525

INTRODUCTION
Between the design idea and its conversion into constructed reality lie the technical detailsin landscape architecture as in every design-related occupation. Only meticulous handling of these details can ensure that the quality of the design is preserved in the completed object. The basis for theenduringsuccess of a construction scheme is therefore a respect for the properties of the materials used, as well as a construction method suitable for the materials and function. Given the particular conditions of the outdoors as a site, aspects of weather impact and the durability of facilities for public use must be paid particular attention. This publication is aimed at anyone who is concerned with creating outdoor facilities and is looking for an introduction to technical and constructive planning. This handbook gives a basic overview of materials, construction methods, and vegetation techniques used in urban-context planning. It is divided into three parts: Materials, The principles of loadbearing stuctures, and Structural elements and building methods. The individual sections can be combined in a modular fashion. The first part outlines materials used out of doors, presenting their basic properties as well as their surface qualities, application possibilities and products. The second part is concerned with fundamental questions of structural engineering. This should support both the readers own construction designs and informed discussion with structural engineers. The first chapter discusses the rules governing structural engineering. The following chapters are concerned with joints in loadbearing construction elements, soil mechanics and the different types of foundation. The third part describes how and with what elements outdoor complexes are built. Besides small structures such as walls, fences, steps or pools, this includes paved and non-paved surfaces. In addition, drainage and various aspects of vegetation techniques are important. As well as the basics of the subject and in-depth rules, various types of construction are presented with the aid of specimen projects with construction methods that go beyond the standard details and expand the field of application. Plants as a construction material are a central theme in landscape architecture. Characteristics, possibilities for use and quality requirements for different plant groups are considered in the materials chapters Plants and Lawns and other seeded areas. Further information can be found in the chapters on vegetation techniques (Chapters 3.9 and 3.10) and in chapters that stand in close relation to plants as a construction material (e.g. the Green roofs chapter). It is impossible to do justice to the complexity of this field, particularly that of growth forms and areas of use for plants, within this publication. Given the background of very different site factors created by the climatic and soil-specific peculiarities of each region, readers are referred to the appropriate subject literature. Where an overview of the most important plant species is possible and appears justified, constructive chapters are supplemented with plant tables. > Chapters 3.12 Water installations, 3.13 Vertical planting and 3.14 Green roofs A regions climatic conditions determine both the use of individual plant species and the construction methods for outdoor complexes. In order to make general statements, the scope of information contained in this publication is restricted to the Central European area. However, many of the construction methods can be used in other regions or adapted with only minor changes.

INTRODUCTION

The European standards handbook already provides international regulations for many areas of construction. These are the basis for the technical codes of practice quoted in this publication. In areas with non-uniform regulation, national standards or guidelines are listed instead. A countryspecific inspection must take place in each individual case. The literature and reference lists at the end of each chapter may help the reader with this research. The national editions of the EU standards, which partly consist of the supplementary regulations, are also recommended. The FLL regulatory publications, established as the standard set of rules in Germany, are listed in some chapters, even if applying them is not compulsory outside Germany. The information they contain reflects the current state of science and practical experience. Outside Germany, they can therefore be considered as guidelines or recommendations. Constructing Landscape is conceived as a reference work on the subject of construction in landscape architecture, intended to accompany the design process from the draft stage to the best possible structural and technical solution, and provide helpful information to support this development. As well as the necessary basic technical knowledge, it is therefore also intended to provide inspiration and encouragement for constructive planning. As guidance for further research, the appendix of this publication contains lists of literature, standards and guidelines plus further information on each theme divided according to the relevant chapter. There is also a summary of literature for all chapters. Astrid Zimmermann Berlin, summer 2008

CONSTRUCTING LANDSCAPE
Essay by Cordula Loidl-Reisch

This publication focuses on the fascinating interaction between landscape, seen as dynamic detailing of the earths surface, and construction. Here landscape can be both a substrate for design work and also a place-related basis. In each case, interest is focused on a mutual process: landscape and its qualities dictate the general conditions while construction, itself determined by the characteristic properties of building components, offers a response. Putting togetherbuilding, erecting or manufacturing a material or immaterial structureis the literal meaning of construction. Construere, the Latin verb, includes all the ideas, considerations, principles, calculations, strategies and processes that contribute to a technical products intended functions, whether it is a machine or a building. The words meaning also implies ordering material and endowing it with form. The Latin word talea in its narrowest sense means a severed twig, but the beautiful French verb derived from it, dtailler (= cutting to pieces) describes what happens in the detailing process: dividing off or dividing up into smaller sections. But detail can refer in particular to single feature, or a more precise excerpt from a greater whole, often an enlarged image. So detailed also means something that is presented precisely and thoroughly in every aspect. Anyone getting involved in construction should be in love with detail. This propensityoften wrongly confused with pettinessis greatly needed because it acts as a motor for new and further developments. Arts pages make a clear distinction between people who solve puzzles and thinkersallowing only the latter to be carefreebut developing detail needs passionate solvers of brainteasers in the best sense of the word, people whose obsessive attitude enables them to work innovatively. A consistent approach to working through from a first draft to the detail is helpful and desirable. But if you find yourself behaving with remorseless rigor and getting mercilessly entrapped in detail at the planning stage, the best response is to season the game with a pinch of humor and juggle your own ideas around a bit. Construct, dont calculate! demands Karlheinz Wagner in his Fragil Bauen (Fragile Building) article (2005, p. 8), pointing out that optimizing a statical system depends to a great extent on materials, and that it is important to do justice to materials when constructing, from the first step in designing the loadbearing structure via developing detail for execution, right through to the finishing touches. Comfort has always been a motor for structural development, and it is becoming even more important. If we believe Eva Gesine Baurs predictions in her 1999 book Was kommt, was bleibt (p. 60), comfort will be the strongest argument when choosing clothing in future. Is it likely to be very different for open space as a consumer product? The fact is that people like comfortable things. Peter Eisenman It is understandable that interior design elements increasingly provide the ideas for objects in the open air. They insist that demands are made in terms of both aesthetics and comfort on structures that are transferred into the open air, where they have to be adapted to withstand considerably harder conditions in terms of weathering and drainage requirements. What can be observed is a regular transfer of elements and materials: indoors, outdoors and back. But the choice of materials and construction is also affected by the zeitgeist and the fashion trends it generates. Here is an angled example: in the 1970s an angle of 45 was held in high esteem and used simply everywherefrom the ground plan of a building to the detail of an object, but we still cannot distance ourselves enough to have a completely relaxed relationship with this angle. It was followed by ruthlessly precise 90 corners, of the kind Donald Judd loved.

MATERIALS PLANTS

29

1.2 PLANTS

Plants, as living materials, are landscape architectures typical design material. All other materials start to age once the project is complete, but plants achieve their full effect only in the course of time. Vegetation has an inherent dynamic. For one thing, plants reflect the cycle of the seasons, as they shoot, blossom and take on their fall colors, and for another, they go through life phases from youth to age. This can mean a vegetation period of up to several centuries, according to growth form. Integrating this dynamism effectively and working creatively with it is a sign of successful planning. This chapter discusses the plant groups available to landscape architecture as material: woody plants, herbaceous plants, bulbs and corms, and seasonal plants. They are categorized according to growth forms and botanical criteria. A short introduction lists the requirements and possible uses for each group, and also the characteristic qualities that each plant displays. As the qualities of plants, being living material, are strongly influenced by the soil and climate of their situation, recommendations and empirical values are transferable to other countries only to a limited extent. There are considerable differences between the horticultural traditions of the individual European countries, defined by different climatic and socio-cultural conditions. This shows very clearly in the range of species used. Different sets of rules have to be applied against this background. This chapter introduces the most important topics, focusing principally on the use of woody plants in urban public parks and green areas. It has not been possible to give tips about using the various plant species and kinds in this publication, with the exception of the street tree list > Tab. 1.2.1 and the summary of lasting potential for hardy geophytes. > Tab. 1.2.3 References are made to the relevant literature on plant use. The chapters on water features, greening buildings and planting roofs also give tips on plant use for these specific situations.

will also ensure varietal consistency. In addition to this, positive qualities of the stock, for example stronger stem or root formation, will also be transferred. In present-day tree nursery practice, seed, young plants, seedlings and fully grown plants are traded throughout Europe. But as the origins of the seed, the soil and climate in the place where it is produced affect the later use of a plant, care should be taken that those conditions coincide with the new location as far as possible. Plants whose seeds or seedlings are produced in milder regions survive less well than those adapted to the situation. These problems become all the more acute the harsher the climate is in the new location. The consequence is a greater failure rate than for new planting, reduced vitality and increased susceptibility to pests. The principal limiting factors are severe frost, long periods of frost and summer drought. Plants are offered with different root qualities. > Tab. 1.2.4 Seedlings of summer-green woody plants and varieties of roses in particular are sold as bareroot goods. They are comparatively reasonable in price. They take root without difficulty, grow rapidly in the first year and adapt well to conditions in their new location. The only disadvantage is that young woody plants often need three to five years to give any sense of spread. The planting period is also limited to the very short dormant season. Rooted plants cannot be dug up and offered for sale until the leaves start to drop in fall. Root ball goods are bred by regular replanting. This makes the plant form a compact, dense root ball, the only form in which relatively large woody plants can be replanted. The older the plant, the more slowly it will bed in and form new shoots. One problem is that the soil in root balls can differ considerably from the new location (e.g. clay root ball in sandy soil), as a capillary break will make the water supply more difficult. Smaller root balls are cloth-wrapped, and larger ones contained in wire mesh. Compared with bare-root goods, the planting time for root ball goods is about 2 to 4 weeks longer, in spring and autumn. Plants can also be grown exclusively in pots and containers, which means that they can be planted almost all year round. For woody plants, the volume of the container in liters is given as well as the size. The pot is the standard form for herbaceous plants. Normally a peat-based substrate is used. As humus-rich peat balls are usually very different from the mineral soil at the new location, this can impede the water supply and rooting. Peat extraction is also problematic for nature conservation

PLANT PROPAGATION
Plants propagate themselves in nature generatively, via seeds. The parent plants are heterozygous so their progeny can be very diverse. Cultivated herbaceous and woody varieties are thus bred vegetatively in horticulture, in order to preserve the qualities and genetic characteristics of the mother plant. Vegetative breeding methods include grafting and cuttings, separation and root cuttings. In grafting, a shoot or bud of the desired cultivar is attached to another type, the stock, which

30

MATERIALS PLANTS
reasons. Substrates made of other raw materials have been introduced, but are not very widely used. The best time to plant most woody and herbaceous varieties is the early fall. Roots continue to grow as long as the soil temperature is about 5 C. Thus, freshly set plants form a well-established root system in order to be able to survive the dryer summer months in the following year. Spring planting makes sense for particularly heavy soils or for varieties that are not reliably frost-resistant. > Chapter 3.9 Planting technique and care of vegetation surfaces

4m

3m

2m

WOODY PLANTS
Woody plants are perennial varieties with woody shoots above the ground. Trees are characterized by apical growth, i.e. they grow from the shoot tip and usually develop a continuous leader, or one that does not divide very much. Shrubs grow from the rhizome and usually develop large numbers of shoots. Because of their size, both groups are suitable for creating threedimensional structures. These can be point structures (solitaire tree), cover and area (grove, group of woody plants) or linear (avenue, hedge), and grow freely or be trimmed with varying degrees of severity. There are three basic types of root system that develop in deep soil: tap root systems grow deep into the soil, vertically, and have a markedly thicker main root; heart root systems have several roots that grow more or less vertically down into the soil; and horizontal root systems with roots that run mainly diagonally to horizontally. Root systems are species-specific, and important for the plants use criteria.
1m

trunk circumference at a height of 1 m

Grade and quality criteria

Woody plants are offered in various sizes, called grades. Quality standards define the grades, and the appropriate minimum sizes. Criteria are number of shoots, height and/or width, trunk circumference for trees (at a height of 1 m), number of transplants and root formation or pot volume for shrubs and woody container plants. > Fig. 1.2.1 Over and above this, authenticity of variety, flawless health and good general vitality are required, so that the plants are in a position to establish themselves without problems. > Fig. 1.2.1 If woody plants are to be accepted as flawless when supplied, in other words if they are for sale, they have to meet other criteria. Trees and shrubs should have a shape that is typical for their species and age. For example, a young tree will naturally have a somewhat narrower crown, while a solitaire tree of the same species that has been cultivated for longer in the tree nursery and planted well away from its neighbors should have a somewhat more extensive crown. Relative age shows above all in the position of the shoots. Young trees grow vigorously and their shoots are positioned at a very steep angle. Somewhat older trees, usually larger grades that have been transplanted several times, have branches that grow at a much lower angle.

Shrubs and crowns should have a regular structure and plenty of branches. Very asymmetrical crowns and bald leading shoots, in other words trunk prolongations, are cause for complaint. The same applies to unduly curly branches and forking trunks. They reduce the long-term stability of the crown, as the branches damage each other when they start to thicken out. Cut points caused by cultivation pruning in the nursery should be at least partially healed over, i.e. new bark should have grown over them. It is also important that there are no weeds in the root balls and containers. Any sign of couch grass (Elymus repens) or ground elder (Aegopodium podagraria) should also be objected to. If herbaceous plants or low bushes are being used for underplanting, these weeds will create a maintenance problem in future and a considerable amount of extra effort. Seed-propagated weeds can essentially be tolerated. > Tab. 1.2.2

Fig. 1.2.1: Selection of Carpinus betulus (hornbeam) grades, schematic diagram: a) small young tree, replanted 1 x, h 6080 cm b) young tree, replanted 2 x, with root ball, h 125150 cm c) young solitaire tree, replanted 3 x, with wired root ball, w 100 150 cm, h 250300 cm d) standard, replanted 3 x, with wired root ball, trunk circumference 1416 cm e) solitaire standard, replanted 4 x, with wired root ball w 100150 cm, h 250300 cm

Summer and evergreen broad-leaved woody plants

Broad-leaved woody plants are dicotyledonous (with two cotyledons in the seed) angiosperms with reticulated leaves. The texture of the foliage is fine to coarse, depending on species. Decorative effect derives primarily from habit (growth form, e.g. strictly upright, weeping, wide-canopied), but also from blossom, fruit and winter color. Deciduous woody plants that are green in summer come from moderate climates with distinctive seasons. They grow new foliage annually during the growing season. Evergreens come from Mediterranean (arid) regions, or areas with mild winters, and most of them have limited frost-hardiness. Street trees have to meet two demands. One is to tolerate the adverse conditions of their city location: urban climate with heat and summer dryness, and frequently radiation back from the facades of buildings, cramped space for their roots and poor, C-character soil, surface and underground sealing, emissions, road salt and dogs urine.

MATERIALS PLANTS

31

Seq. no.

Botanical and English name

Height achieved in m

Width in m

Light penetration

Sun or shade

Suitability for urban spaces

Remarks

Acer platanoides, Plane

2030

1522

negligible

sun to semishade

suitable within limits

Large, fast-growing tree, with a dense, rounded crown; blossoms before the leaves shoot; sensitive to ground sealing

Acer platanoides Cleveland Norway maple

1015

79

negligible

sun to semishade

suitable

As no. 4, but medium-sized tree with oval, compact and regular crown, horizontal oval shape when mature, young leaves marbled in light red; resistant to urban climate

32

Alnus spaethii, Alder

1215

810

moderate

sunny

well suited

Passed as a suitable street tree since 1995, very fast-growing, with a broad pyramidal crown, branches loosely upright; spreads more horizontally when mature, consistently straight trunk, late-falling, dark green, slightly shiny foliage (can break under snow) Large, fast-growing tree with loosely rising crown; not resistant to urban climate and therefore not suitable for paved areas, short-lived; needs a lot of light, shallow rooted, pioneer woody plant

35

Betula pendula, Silver birch

1825 (30)

1015 (18)

considerable

sunny

suitable within limits

44

Corylus colurna, Turkish lbert

1518 (23)

812 (16)

negligible

sun to semishade

well suited

Medium to large tree with regular, broad-based conical crown, consistently straight trunk, beware of falling fruit, edible fruit

59

Fraxinus ornus, Manna ash

812 (15)

68 (10)

moderate

sunny

suitable

Fast-growing small tree with weal wood with a round or broad pyramidal crown, branches rarely grow straight, pay attention to side clearance, owering tree; do not use in paved areas; resistant to urban climate

62

Ginkgo biloba, Ginkgo biloba

1530 (35)

1015 (20)

considerable

sun to semishade

well suited

Large tree, grows in various ways, fan-shaped leaves, dioecious, disease-resistant, needs a lot of light, beware of falling fruit, fall color; resistant to urban climate

85

Platanus acerifolia, London plane

2030 (40)

1525

negligible

sunny

suitable

Large, fast-growing tree with wide crown, increasingly prone to attack by pests such as leaf-blight, wilt, lace-bug in recent years; resistant to urban climate

86

Populus berolinensis, Berlin poplar

1825

810

moderate

sunny

suitable within limits

Large tree with broad, column-like trunk, fast-growing, forms root suckers

91

Prunus avium, Wild cherry

1520 (25)

1015

negligible

sunny

not suitable

Medium-sized tree, risk of gummosis, owering tree, fruit falls

109

Quercus robur, Pedunculate or English oak

2535 (40)

1520 (25)

considerable

sunny

suitable

Large tree with broad conical crown, spreads widely; susceptible to pests, do not plant before December

113

Robinia pseudoacacia, False acacia

2025

1218 (22)

considerable

sunny

suitable

Large tree with open, irregular crown, fast-growing when young, owering tree; low maintenance but susceptible to wind damage in nutrient-rich soil, dead wood forms in later years, forms root suckers; resistant to urban climate

133

Tilia cordata, Small-leaved lime

1820 (30)

1215 (20)

negligible

sun to semishade

suitable within limits

Large tree with broad, conical, dense crown, spreads vigorously when older; habit can be very variable, likes fresh, open soil; secretes honeydew

135

Tilia cordata Greenspire, Greenspire small-leaved lime

1820

1012

negligible

sun to semishade

well suited

Like no. 133, but crown narrower, more regular and denser, broader when older; branches ascending; bark necrosis in some regions

Tab. 1.2.1: Extract from the 2006 GALK street tree list. Of a total of 145 species and varieties listed, 7 were rated as well suited, about 40 as suitable and 50 as suitable within limits. It may be better to check the suitability of individual species rather than the suitability of the species as a whole.

32

MATERIALS PLANTS
If trees are not to create traffic safety problems around them, the also have to meet functional requirements. Relatively high stability and safety against fracture should minimize danger from trees falling over or branches breaking off. Upright growth with a closed crown should secure the streets light profile and avoid damage from low branches. Fruit formation is undesirable as fruit falling on the pavement can be a hazard and increase the danger of people skidding. They should also not exude honeydew (aphid secretion) as this soils parked cars. Growth typical to the species should not include roots that come very near the surface, as these frequently damage roads and footpaths. The best species for the urban climate come from subMediterranean or subtropical regions, as they can tolerate heat and dryness. But most central European tree species come from woods or meadows and are thus ruled out. Some pioneer trees such as Populus (poplar) are unsuitable because of their aggressive roots near the surface (horizontal root system); they also grow suckers and have brittle wood. Varieties of Acer platanoides (plane), also a pioneer tree, are at least suitable, however. List of recommended or unsuitable trees are often compiled to make it easier to choose suitable street tree species. In Germany, the Arbeitskreis der Grnflchenamtsleiterkonferenz (Green open space department directorial conference working party, GALK) has published a street tree list based on the experiences of local green open space departments. > Tab. 1.2.1 This working party is also in touch with experts from neighboring European countries.

Points to check

Criteria

Procedure, remarks

size

minimum height and/or number of shoots

measure or count random samples

width

minimum width given, fully developed crown for solitaires

remove transport protection from crown, requires good species knowledge as there are great differences between species

trunk circumference

minimum circumference at a height of 1 m as specied in tender

measure random samples, all items for large woody plants

species or variety

must comply with species or variety specied

difcult if no foliage, varieties can often be checked only by blossom or species, open transport protection for individual plants for easier identication

root ball quality

roots rm and dense throughout the ball, root end not too thick at the end of the ball

plants loose in the ball package? Then complain about droopy ball. Very thick root ends at the edge of the ball indicate overripe goods

state of health

last years shoots, bud or foliage and bark immaculate, lichen growth

look carefully for discoloration and distortion, and for traces of pest damage, lichen indicates stagnating growth

transport and storage damage

roots, ball, trunk and shoots free from mechanical damage and without damage from heat or cold

look carefully for dried-out roots, bent shoots, fresh (painted) damage to bark and loose root balls, complain about damaged leaders if applicable (always in the case of conifers and street trees), always transport covered in case of frost or temperatures above 25 C

freedom from weeds

ball and container goods free of root weed (couch grass!)

in case of suspicion, open root ball or check during planting

Tab. 1.2.2: Checking criteria for accepting woody plants

continuous leader, strong trunk extension (consistent thickness) crown with regular branches

damaged leader irregular crown branches curling away, the continuing leader is too thin (tapering) for later crown development

cuts not healed, as heading down was performed too late straight trunk clothes peg stump recent bark damage from transport

cuts partially or completely healed

older bark damage at base of trunk from digging etc. rm root ball with tightly packed roots Fig. 1.2.2: Avenue trees: positive and negative examples, schematic diagrams Fig. 1.2.3: Preproduced clipped hedge elements: Prunus laurocerasus Herbergii (cherry laurel), solitaire, 4 x replanted with wired root ball, 110 x 60 x 200, 810 years old

MATERIALS PLANTS
Fig. 1.2.4: a) Spheres made of Ligustrum vulgare Atrovirens (privet), 160180 cm diameter, transplanted 5 x, with wired root ball, approx. 1518 years old, trimmed annually b) Tilia cordata Greenspire (small-leaved lime), foot trellis, transplanted 5 x with wired root ball, trunk circumference 4045 cm, width: 250 cm, overall height 570 cm, roughly 1215 years old c) Tilia europaea Pallida (Kaiserlinden), box-shaped, transplanted 4 x with wired root ball, 4550 cm trunk circumference, overall height approx. 400 cm, crown springs at approx. 250 cm, 1 trim annually 1, approx. 1722 years old d) Buxus sempervirens (box) as sofa, approx. 2 m wide and 1 m high. Commissioned. Made up of solitaire plants, transplanted 34 x, approx. 710 years old, structurally trimming for about 4 more years, trimmed 2 x annually

33

a c d

Street trees are supplied with wrapped root ball at a trunk height of 220 cm to 250 cm. The continuous leader should have even branches of medium thickness, so that the tree can be headed back in the next few years. A trunk height or a side clearance of 4.5 m is usually needed on main roads, less on minor roads. Leaders with forking or damage to the leader are definite cause for complaint. > Fig. 1.2.2 Hedging plants are bred from deciduous and evergreen hardwoods that tolerate clipping well and can grow like shrubs or trees. Hedging should carry twigs from the bottom upwards and grow densely, which is achieved by repeated clipping at the tree nursery. Light shrubs are supplied with bare roots, thicker shrubs with wrapped root balls or in containers. > Tab. 1.2.4 Preproduced hedges have been available for some time now. They make newly planted areas look mature immediately upon completion. > Fig. 1.2.3 Topiary plants are bred from deciduous and evergreen hardwoods and more rarely from conifers, above all Taxus baccata (yew). Trees and shrubs that tolerate clipping, e.g. Carpinus betulus (hornbeam), Fagus sylvatica (beech), Prunus laurocerasus Herbergii (cherry laurel) and Buxus sempervirens (box) are suitable. There are

no standard quality guidelines for topiary plants. Large tree nurseries offer a whole variety of shapes designs. Trees are bred in the shape of spheres, columns of fans; and shrubs primarily in geometrical shapes like spheres, cubes or cones. Unusual designs not included in the standard range can be bred to order by specialist tree nurseries, but at least four years or more must be allowed for them to be ready. Typically, topiary plants are used for formal outdoor areas. > Fig. 1.2.4 Fully grown trees are not usually brought on in a tree nursery, but are taken from their long-established location and replanted as more or less fully mature specimens. They change and make a striking effect on the space immediately after planting because of their mature or irregular, expressive habit. Transplanting costs vary from low to relatively high according to species and size, the previous location and the distance traveled. The failure rate is considerably higher than for nursery goods, as most of the roots of a large, fully grown tree are lost in transplantation. They have to be carefully, elaborately and expensively tended. Frequently trees of this kind need a permanent anchorage, as their root systems have not redeveloped sufficiently strongly. As large trees are no longer very adaptable because of

MATERIALES HORMIGN

95

1.7 HORMIGN

Los hormigones son mezclas que se endurecen y en las que el cemento acta como material conglomerante. Una vez que el hormign fresco, plstico, se ha estabilizado completamente, se obtiene un material de construccin que se asemeja a la piedra en apariencia y propiedades tcnicas. Por ello el hormign se describe con frecuencia como piedra artificial. La frmula bsica del hormign contiene un rido granular mineral, cemento y agua. > Fig. 1.7.1 Este proceso tambin se denomina hidratacin, ya que el agua es el agente que produce el fraguado y endurecimiento del cemento. A partir de la pasta de cemento, mezcla de cemento y agua, se forman estructuras cristalinas entrelazadas en un proceso que se prolonga durante meses. Estas estructuras microscpicas son capaces de ligar de forma estable sustancias minerales y metlicas durante largos periodos de tiempo. Con el objetivo de modificar las propiedades del hormign de una determinada manera, se pueden aadir diversos aditivos y adiciones durante su produccin industrializada. El conjunto se describe como el sistema de cinco componentes del hormign. La variacin controlable de sus propiedades

convierte al hormign, al igual que al vidrio o al acero, en un material perfectamente moderno. La casi interminable lista de variedades contemporneas, como los hormigones autocompactantes o los translcidos, muestra el potencial que todava tiene este material de construccin.

COMPOSICIN, PROPIEDADES Y PRODUCTOS

La fabricacin de hormign implica la aplicacin de frmulas o dosificaciones que determinan la composicin del producto final y garantizan su calidad. El elemento principal de cualquier frmula son los ridos, sustancias minerales (gravas y arenas) que pueden ser redondeadas o trituradas, mientras que el cemento acta como ligazn, permeando la mezcla y dotndola de resistencia. > Fig. 1.7.2 El endurecimiento de este cemento, tambin llamado fraguado, es un proceso claramente visible al cabo de unas pocas horas, aunque tarda aos en concluirse. El cemento fragua hidrulicamente, esto es, en ausencia de aire e incluso bajo el agua. La piedra cementada por este proceso no es soluble en agua. Segn cul sea la cantidad de agua aportada, el hormign fresco es una masa gris pastosa y fluida que se adapta a cualquier molde. La proporcin entre el contenido de cemento y el de agua se describe como la relacin agua-cemento. En los hormigones de exteriores, resulta importante obtener una alta resistencia frente a la sal para deshielo, lo que se obtiene con una relacin agua-cemento de 0,5 (una mezcla que siga una proporcin de 1 l de agua por cada 2 kg de cemento). La forma del hormign slido se suele definir mediante el uso de moldes. En la fabricacin industrial de piezas prefabricadas de hormign en masa, se emplean moldes de acero de precisin en los que se vierte hormign seco, a continuacin se lo agita y se le aplican altas presiones. > Fig. 1.7.3 El hormign vertido en la propia obra se denomina hormign in situ, mientras que los moldes donde se endurece reciben el nombre de encofrados. Los encofrados modernos

Fig. 1.7.1: Seccin de hormign: los ridos ms gruesos quedan rodeados por los componentes ms nos

Fig. 1.7.2: La supercie de este muro se proyect teniendo en cuenta una variacin controlada de los ridos, el tipo de cemento y el contenido de humedad del hormign. Los elementos metlicos fueron aadidos a posteriori

Fig. 1.7.3: Escaleras y supercie acabadas con elementos de hormign prensado de color antracita

96

MATERIALES HORMIGN

consisten en sistemas modulares de fabricacin industrial, aunque tambin se pueden realizar de forma artesanal con madera. El hormign moldeado in situ cuyas superficies vayan a quedar visibles se denomina hormign visto; para conseguirlo se requiere que el hormign fresco tenga una consistencia blanda o fluida y una curva de fraguado en consonancia. Se compacta mediante un vibrador interno. > Fig. 1.7.4 Como la piedra natural, el hormign presenta una gran estabilidad ante la compresin. Esta se corresponde con la clase de resistencia del hormign, de forma que un hormign C-20/25 alcanza una resistencia a compresin de entre 20 y 25 N/mm2. El hormign que alcanza una resistencia de entre 55 y 67 N/mm2 se describe como hormign de alta resistencia. En funcin del rido, el hormign en masa pesa entre 2,0 y 2,6 kg/dm3. > Tab. 1.7.1

El fraguado del cemento es un proceso exotrmico; es decir, que libera calor. En este sentido se distinguen los cementos de fraguado rpido con altos calores de hidratacin de los de fraguado lento con calores de hidratacin ms bajos. Estos ltimos se utilizan en elementos estructurales de gran masa en los que la ms mnima dilatacin debida al calor podra producir grietas. > Fig. 1.7.5 y Captulo 2.1 Estructuras portantes y su dimensionado En los meses de otoo e invierno, normalmente es preferible el empleo de cemento de fraguado rpido, ya que las bajas temperaturas del ambiente retardan el proceso de endurecimiento.

Adiciones y aditivos
Las adiciones se aaden al hormign en grandes cantidades para modificar determinadas propiedades como el color o la densidad. Se toman en consideracin en la frmula del hormign; esto significa que, en funcin de la cantidad de adicin aadida, se debe agregar mayor cantidad de cemento. Ejemplos de estas adiciones son las cenizas industriales y los polvos o harinas de roca. Estos materiales sirven como relleno para los poros. > Fig. 1.7.6 El hormign autocompactante, por ejemplo, contiene altos niveles de harina de roca. Otras adiciones son los pigmentos o las rocas volcnicas como el trass. Estas sustancias, igual que el cemento, suelen presentar propiedades hidrulicas o tenerlas en estado latente. En otras palabras, reaccionan con la cal del cemento para formar un compuesto ptreo. Los aditivos se aaden en pequeas cantidades para modificar las propiedades qumicas o fsicas del hormign. Los

Cemento
El cemento consiste en una mezcla de 2/3 de cal y 1/3 de arcillas, cocida hasta el lmite de sinterizacin, a una temperatura de unos 1400 C, hasta formar lo que se conoce como clnker de cemento de Prtland, que posteriormente es molido para obtener el fino polvo que constituye el cemento de Prtland. La norma sobre cemento EN 197-1 distingue 27 tipos de cementos de uso habitual en Europa, divididos en 5 clases. La clase CEM I describe el cemento de Prtland comn, mientras que las clases CEM II a CEM V regulan las mezclas de cemento de Prtland con diversas sustancias hidrulicas, por ejemplo la arena granulada (CEM II, cemento de Prtland con escorias).

Clase de resistencia

Contenido de cemento kg/m3

Adecuado para:

C 12/15

270

Hormign normalizado X0

Hormign en masa

C 20/25

280

C 25/30

300

Hormigones de distintas caractersticas

Hormign armado

C 30/37

300

Tab. 1.7.1: Clases de resistencia del hormign

Fig. 1.7.5: Tpicas suras de retraccin en un hormign coloreado

Fig. 1.7.4: Plataforma de jardn ejecutada con hormign in situ y una piedra del lugar integrada

Fig. 1.7.6: Elementos de hormign armado visto: el relleno de las juntas ayuda a optimizar la supercie

MATERIALES HORMIGN

97

ms comunes son los retardantes, que ralentizan el proceso de fraguado. Otros aditivos son los plastificantes, los superplastificantes, los aireantes, los sellantes, los acelerantes, los aditivos de inyeccin y los estabilizantes. > Fig. 1.7.7

Clases de exposicin
El hormign puede verse sometido a diferentes agresiones, como la humedad, el hielo o los ataques qumicos (cidos, sales, etc.), que obligan a adaptar su composicin a las condiciones de cada emplazamiento. Las clases de exposicin definen los usos y los niveles de agresin que puede tolerar un determinado hormign. A partir de estas, se puede calcular la calidad mnima del material; en particular, en el caso de hormigones en exteriores, sometidos a fuertes
Fig. 1.7.7: Hormign sin ridos nos. Tratada con retardantes, la supercie del hormign fragua ms lentamente que la masa, lo que se puede aprovechar para lavar los ridos nos de la supercie y obtener este tipo de hormign

tensiones, debe prestarse especial atencin al contenido de cemento, a la relacin agua-cemento y al espesor del recubrimiento sobre las armaduras. > Tab. 1.7.2 Se distinguen las siguientes clases de exposicin: XC (corrosin de la armadura por carbonatacin), XD (corrosin de la armadura por cloruros), XS (corrosin de la armadura por agua marina), XF (ataque por hielo), XA (corrosin de la armadura por ataques qumicos), XM (desgaste natural), XO (hormign sin riesgo de ataques). Un nmero adicional cuantifica la intensidad de la agresin; por ejemplo, XS1 significa sal en el aire, mientras que XS2 significa sumergido en agua marina.

Hormign armado
La incorporacin de un refuerzo mejora sustancialmente las propiedades mecnicas del hormign, especialmente su relativamente baja resistencia a la traccin. Por lo general, para estos refuerzos se utiliza acero estructural, y el hormign resultante se denomina hormign armado. En casos especiales, sin embargo, puede utilizarse como refuerzo algn tipo de acero especial o diversas fibras. En teora, cualquier material con buena resistencia a la traccin y suficiente durabilidad podra servir. En el caso del hormign armado convencional, se utilizan mallas electrosoldadas y barras corrugadas de acero, as como otros elementos especialmente fabricados, como jaulas de armadura. El acero se dispone en aquellas zonas de la seccin del hormign donde se producen esfuerzos de traccin. Es preciso calcular las necesidades del elemento estructural para determinar el rea total de acero necesaria. En

Clase de exposicin X0 X0 XC XC1

Forma de ataque Condiciones ambientales Sin riesgo de ataque o corrosin Elementos estructurales en un ambiente no hostil al hormign Corrosin de la armadura por carbonatacin Seco o permanentemente mojado

Ejemplo tpico

Mnima clase de resistencia a la compresin

Contenido mnimo de cemento kg/m3

Relacin agua-cemento mxima

Hormign de relleno, subbase granular

C 8/10

Elementos estructurales en interiores; elementos estructurales sumergidos de forma permanente en agua Cimentaciones Elementos estructurales bajo techo pero en contacto con el ambiente exterior (p. ej.: vestbulos abiertos) Construccin al exterior con exposicin directa a las precipitaciones

C 12/15

240

0,75

XC2 XC3

Mojado, ocasionalmente seco Humedad moderada

C 16/20 C 20/25

240 260

0,75 0,65

XC4 XD XD1 XD2 XD3 XS XS1 XS2 XS3 XF XF1 XF2 XF3

Mojado, ocasionalmente seco

C 25/30

280

0,60

Corrosin de la armadura por cloruros ajenos al agua salada Humedad moderada Mojado, ocasionalmente seco Alternativamente mojado, ocasionalmente seco P. ej.: garajes particulares Piscinas de agua salada Pavimentos de carreteras C 30/37 C 35/45 C 35/45 300 320 320 0,55 0,50 0,45

Corrosin de la armadura por cloruros presentes en el agua salada Sal en el aire Bajo el agua Zona de mareas, zonas de salpicaduras Ataque por hielo, con o sin agentes de deshielo Saturacin moderada de humedad sin agentes de deshielo Saturacin moderada de humedad con agentes de deshielo Alta saturacin de humedad sin agentes de deshielo Elementos estructurales en exteriores Pavimentos tratados con sales de deshielos Supercies horizontales de hormign expuestas a precipitaciones y heladas, vasos de piscinas C 25/30 C 35/45 C 25/30 (LP) C 25/30 con aire incorporado C 35/45 280 320 300 300 320 0,60 0,50 0,55 0,55 0,5 0,5 Elementos estructurales exteriores prximos a la costa Elementos estructurales en muelles sumergidos de forma permanente Muros de muelles C 30/37 C 35/45 C 35/45 300 320 320 0,55 0,50 0,45

XF4

Alta saturacin de humedad con agentes de deshielo

Supercies viarias expuestas a agentes de deshielo

C 30/37 con aire incorporado

320

Tab. 1.7.2: Clases de exposicin y calidades del hormign segn EN 206 y Zement-Merkblatt Betontechnik B9

98

MATERIALES HORMIGN

el caso de elementos estructurales sometidos a cargas importantes o relevantes en trminos de seguridad, se requiere la participacin de un calculista especializado. > Captulo 2.1 Estructuras portantes y su dimensionado Una desventaja del hormign armado reside en la necesidad de cubrir las armaduras de acero para protegerlas de la corrosin. El acero oxidado multiplica su volumen respecto del original, lo que puede originar un efecto en cadena y desconchar la superficie del hormign. > Fig. 1.7.8 El recubrimiento mnimo de hormign debera ser de 2,5 cm, en el caso de elementos estructurales situados en exteriores con un espesor mnimo de 6-8 cm. En caso de ambientes propicios a los ataques qumicos, o en las proximidades del mar, suele resultar adecuada una cubierta de 5,5 cm. Para mantener las distancias de las barras entre s y respecto del encofrado, y evitar desplazamientos por las vibraciones, es necesario utilizar un nmero suficiente de separadores.

Hormign impermeable
Se denominan hormigones impermeables aquellos que presentan una alta resistencia a la infiltracin de agua. Esta propiedad se obtiene reduciendo al mnimo la porosidad de la mezcla granular y la relacin agua-cemento. Para minimizar la entrada de agua a travs de las grietas, es preciso limitar su alcance armando adecuadamente el hormign. > Captulo 2.1 Estructuras portantes y su dimensionado Para conseguir la impermeabilidad de las juntas constructivas y de dilatacin se hace necesario utilizar tapajuntas adecuados.

Fig. 1.7.9: Estelas realizadas con hormign autocompactante, Monumento a los Judos Asesinados de Europa, Berln, Alemania

embargo, por su propia novedad, an no pueden realizarse afirmaciones concluyentes respecto a su durabilidad y a su proceso de envejecimiento.

Hormigones reforzados con fibras y otros materiales

La baja resistencia a la traccin y la ductilidad (capacidad para expandirse y deformarse) del hormign implican una tendencia a agrietarse, que en los bordes termina produciendo desprendimientos y prdidas de material. En la fabricacin de losas prefabricadas de hormign para pavimentar, se trata de mitigar este problema introduciendo una doble malla de acero que se pliega y solapa en los bordes. Se trata del llamado hormign reforzado con fibra de acero, en el que el acero no se dispone en funcin de las tensiones de traccin, como en el hormign armado convencional, sino que se distribuye uniformemente por toda la seccin del hormign. Otros tipos de refuerzo tales como las fibras o el acero de alta resistencia ofrecen mejores resultados que el acero de construccin, aunque tambin resultan ms costosos. Asimismo, al reducirse la necesidad de los recubrimientos de hormign, se pueden realizar estructuras extremadamente delgadas. Tambin es posible obtener superficies de gran calidad. > Fig. 1.7.10 En el hormign translcido se utilizan fibras de vidrio como refuerzo. De esta forma, en la medida en que las fibras transmiten la luz sin prdidas, se pueden distinguir diferencias en el brillo y hasta colores a travs de muros de 1 m de espesor. > Fig. 1.7.11

Hormign autocompactante
El hormign autocompactante es un material con una fluidez excepcional y un muy bajo contenido en aire, lo que resulta posible gracias al desarrollo de una nueva generacin de plastificantes de alto rendimiento. La consistencia y la viscosidad del hormign autocompactante fresco son similares a las de la miel. Por ello, fluye rodeando los obstculos y rellenando las cavidades sin necesidad de compactacin posterior. Las superficies visibles de este material ofrecen un aspecto extremadamente homogneo. > Fig. 1.7.9 Puesto que este hormign presenta una alta proporcin de ridos finos, puede asumirse que la superficie permanecer homognea con el paso del tiempo y que se desprendern pocas partculas. Sin

Hormign compactado al vaco

El proceso de deshidratacin por vaco se utiliza principalmente en losas de pavimentacin y permite que el hormign se vierta con un alto contenido de agua, lo que facilita la compactacin. Posteriormente, el exceso de agua se extrae utilizando mallas y bombas de vaco. Este procedimiento se puede utilizar para obtener una relacin agua-cemento ptima. Finalmente, el hormign fresco se alisa con una fratasadora. Al optimizar la relacin agua-cemento, el proceso de deshidratacin por vaco reduce la propensin a las grietas de contraccin, y mejora tanto la resistencia a las heladas como la resistencia mecnica final del hormign.
Fig. 1.7.8: Corrosin de la armadura

MATERIALES HORMIGN

99

Fig. 1.7.10: Hormign reforzado con bras: a) panel de fachada b) asientos c) bancos realizados con hormign reforzado con bras

de mayor precio, cuya capa superficial suele ser de hormign visto, un hormign optimizado para tener un determinado aspecto, por ejemplo con la adicin de pigmentos o arena ornamental, y que posteriormente puede recibir un tratamiento mecanizado. > Fig. 1.7.12 Otros productos fabricados mediante este procedimiento de prensado son las piezas de bordillo, de muros, de esquina, escalones, empalizadas y conductos. Las partes acabadas con hormign visto presentan una superficie lisa caracterstica en la que no se percibe el grano del rido. En general, estos elementos se realizan con aristas biseladas para evitar cualquier dao en el proceso de fabricacin, transporte o puesta en obra; las piezas sin bisel o con acabados de hormign coloreado siguen un procedimiento especial de produccin y solo se consiguen en fbricas especializadas.

CARACTERSTICAS Y TRATAMIENTOS SUPERFICIALES

El color bsico del hormign reciente natural es un gris claro clido y mate, con variaciones en funcin de la humedad del hormign fresco, as como del tipo y del contenido de cemento. Su color puede modificarse considerablemente a travs de una cuidadosa eleccin del cemento y de los ridos y colorantes adecuados. Por otro lado, diversos tratamientos superficiales utilizados en la fabricacin industrial tambin afectan al color. El ms significativo es el lavado a presin, con agua, arena de cuarzo o granalla de acero, que implica, fundamentalmente, un envejecimiento prematuro mediante el desgaste de la superficie de cemento. > Fig. 1.7.13 Cualquier tipo de tratamiento superficial aplicable a la piedra natural tambin puede emplearse para el hormign. > Captulo 1.5 Piedra natural, Propiedades y tratamientos superficiales

a b c

Piezas de hormign prefabricado

Las piezas de hormign producidas industrialmente se conocen como elementos de hormign prefabricado, y pueden ser de hormign en masa, fabricados principalmente por presin, o de hormign armado. El hormign prensado tiene una superficie rugosa, lo que resulta muy til para pavimentos y superficies peatonales, en los que resulta claramente visible el grano del rido. Los hormigones para pavimentos se fabrican con dosificaciones especiales para alcanzar resistencias extremadamente elevadas. Esto significa que las piezas de pavimento no necesitan biselado, sino que sus aristas pueden dejarse en ngulo recto. Estas piezas de pavimento sin biselar se emplean en calzadas y zonas de aparcamiento, ya que ayudan a mitigar el ruido de los vehculos. Existen tambin piezas

Hormign visto
Hoy en da, para obtener hormign visto, se utilizan normalmente encofrados no absorbentes. Estos consisten en paneles laminados de madera revestida o materiales artificiales que ofrecen superficies perfectamente lisas sin ningn tipo de alabeo, aunque tampoco son capaces de absorber el exceso de agua del hormign. Bajo ciertas circunstancias, los encofrados no absorbentes pueden provocar un blanqueamiento o blushing en la superficie del hormign. Los encofrados fabricados con madera natural, por su parte, tienen cierta capacidad de absorber agua del hormign fresco. Junto a la estructura de madera natural, el hormign conformado de esta manera ofrece un aspecto ms vivo,

Fig. 1.7.12: Supercie de una losa de pavimento: hormign granallado siguiendo un patrn diagonal

Fig. 1.7.11: Hormign translcido

Fig. 1.7.13: Cuadro tratado con chorro de arena en medio de una supercie de hormign con una ptina natural a causa del envejecimiento

100 MATERIALES HORMIGN

aunque tambin la impresin de un color ms uniforme, con menos poros y manchas en la superficie. > Fig. 1.7.15 Cuando se utiliza un encofrado no absorbente, es preciso recurrir a un procedimiento de fabricacin del hormign altamente estandarizado, ya que se har visible en la superficie cualquier diferencia en la humedad o la compactacin, as como cualquier exceso de los agentes desencofrantes. Incluso las fluctuaciones del clima pueden crear diferencias en el color de las superficies. Los criterios de valoracin de una superficie de hormign visto son la textura y porosidad de la superficie; la precisin en las juntas de los elementos del encofrado, y la uniformidad del tono, de la superficie, de las aristas exteriores y de los orificios de anclaje. En aquellas situaciones en que los requisitos exigidos al hormign visto sean ms estrictos, hay que cuidarse de utilizar una adecuada combinacin de sistemas y elementos de enconfrado, agentes desencofrantes y dosificaciones del hormign, lo que puede requerir la realizacin de ensayos previos. En los elementos prefabricados se pueden obtener resultados ms precisos que en el hormign in situ, en la medida en que su proceso de fabricacin se realiza en un entorno controlado y protegido de los agentes climticos.

o reflectante, siempre y cuando sea resistente al lcali. El efecto del vidrio coloreado solo resulta visible una vez que se ha picado la superficie del hormign. > Fig. 1.7.18

Hormign fotograbado
El hormign fotograbado se aquel en cuya superficie se ha inscrito cierta informacin visual. La informacin (grfica o textual) no puede modificarse una vez que se ha grabado. El diseo se imprime sobre una lmina con agentes retardantes que impiden el endurecimiento del hormign en aquellas zonas donde se ha aplicado; esta lmina puede colocarse sobre el encofrado. Una vez que el hormign es desencofrado y se lava su superficie, la informacin visual impresa se hace visible debido a las diferencias en la composicin de la superficie: las zonas crudas y lavadas quedan ms oscuras que el resto. > Fig. 1.7.19 Existe otro procedimiento que se aplica sobre superficies de hormign ya fraguado. Consiste en usar de una lmina parcialmente perforada, que se fija mediante cola a la superficie del hormign y a continuacin se lava con un gel cido especial. El efecto que se consigue es bastante similar al obtenido mediante el procedimiento anterior.

Hormigones fratasados y pulidos Diseo del color y la superficie

En construccin, el color del hormign puede modificarse con la eleccin del rido y del cemento. El cemento blanco combinado con ridos de color claro, como la arena y la grava de cuarzo, proporciona un hormign completamente blanco. Tambin se puede obtener un color marrn mediante el empleo de cemento de pizarra bituminosa como conglomerante. Es posible conseguir una amplia gama de colores mediante la utilizacin de pinturas especiales para hormign, tanto lquidas como en polvo. Sin embargo, como en otros muchos materiales de construccin expuestos a la intemperie, el color se va perdiendo con el paso de los aos, en ocasiones de forma significativa, especialmente en el caso de los tonos rojos y azules. Se puede lograr un color verde con xido de cromo, mientras que diversos pigmentos a base de xido de hierro proporcionan amarillos, rojos, marrones y negros. > Fig. 1.7.16 La cantidad de color aadida suele situarse entre el 1 y el 10%. La adicin de una cantidad superior no proporciona un color ms intenso, que s puede obtenerse si se utiliza cemento blanco en lugar de gris. En el pasado se agreg ocasionalmente hierro en polvo a la mezcla del hormign para obtener una patina de xido; en la actualidad existe un nuevo procedimiento, procedente de Finlandia, que se basa en el mismo principio: se aade cobre en polvo al hormign. Segn cul sea el catalizador empleado, el hormign muestra un color azul o verde bastante duradero. El color del hormign tratado mediante este procedimiento resulta ms natural que el que se obtiene por procedimientos convencionales. El lavado a presin proporciona a las superficies de hormign una coloracin y una estructura similares a las de la piedra natural, debido a que aumenta la cantidad de rido expuesto. El uso de plantillas geomtricas realizadas con materiales artificiales en el encofrado (tanto en hormign in situ como en elementos prefabricados) permite dar forma a la superficie sin necesidad de un tratamiento posterior. Estas plantillas pueden utilizarse repetidamente y aprovecharse para crear superficies con patrones complejos. > Fig. 1.7.17 Por otra parte, tambin se puede utilizar como rido, en lugar de arena o grava convencional, vidrio mineral coloreado El hormign fratasado es conocido como terrazo. Estas superficies pueden pulirse hasta brillar con intensidad si el hormign es de alta calidad. Para ello requiere de una alta densidad y resistencia, que se obtienen mediante una baja relacin agua-cemento y una compactacin concienzuda. Los posibles poros de mayor grosor se rellenan con mortero fino y se vuelven a fratasar o pulir. Las fases sucesivas implican el uso de abrasivos cada vez ms finos, hasta terminar con la utilizacin de compuestos especiales de pulido para crear una superficie homognea y muy pulida. > Fig. 1.7.20

FORMAS Y UNIONES El hormign como recurso constructivo y material para cimentaciones

Una porcin significativa del hormign empleado en paisajismo se utiliza en las cimentaciones, por lo que resulta invisible para los usuarios. Este hormign debe elaborarse tomando en consideracin la humedad del suelo (consistencia seca para el tipo C1, segn viene especificado por la norma EN 1045) con una clase de resistencia C12/15 (o, en caso de mayores requerimientos, clase C20/25). Apisonar o presionar este hormign lo compacta lo suficiente como para fijar el elemento constructivo en su posicin. Con el fin de evitar fallos en la construccin, al utilizar un hormign de cimentacin es preciso respetar una serie de reglas bsicas, aplicables a cualquier tipo de hormign: 1. El hormign de cimentaciones suele prepararse en la fbrica y transportarse a la obra en el mismo da. Deben utilizarse agentes retardantes para garantizar que pueda trabajarse a lo largo de toda la jornada, especialmente cuando se den altas temperaturas. Aquel hormign que haya comenzado a fraguar antes de ser vertido en obra ya no puede utilizarse. 2. Para evitar la presencia en el hormign de impurezas procedentes del terreno, especialmente en suelos altamente cohesivos, debe disponerse una capa de material neutro (por ejemplo, arena gruesa) en la base de la excavacin. 3. En suelos con bajo contenido en humedad, el hormign debe protegerse de la desecacin. Adems, una vez

MATERIALES 101 HORMIGN

Fig. 1.7.14: Supercies de hormign: a) la supercie alisada est picada uniformemente en la misma direccin con una escobilla na b) supercie picada con rido de granito triturado c) supercie picada con rido de diabasa triturada d) supercie pulida y granallada

a b c d

Fig. 1.7.15: Supercie de hormign visto: encofrado de madera natural, color amarillo

Fig. 1.7.16: Supercie de un hormign rojo en el que se ha empleado cemento blanco

a Fig. 1.7.18: Hormign in situ con rido de vidrio triturado Fig. 1.7.17: Patrones superciales creados mediante el uso de una diversidad de encofrados: a) plancha de serigrafa, b y c) plancha texturizada b c

STRUCTURAL ELEMENTS AND BUILDING METHODS 243 STEPS

3.3 STEPS

OUTDOOR STEPS
Steps are a special element within a path. They make it easier to walk at places where a marked longitudinal incline would make a climb too difficult, and they create a pedestrian connection between areas of significantly different height. They structure the run of a pathway or a terrain, forming an important creative resource for contouring relief and for bordering or accentuating areas.

constructed from gridded material and so no incline is needed). The rise ratio of a step is derived from the rise (r) and the tread (t), and is expressed as r/t (e.g. 15/33). The actual structural dimensions of a step can deviate from the rise ratio; for example, it is derived from the height (h) and the step width (w) for a solid rectangular step. > Fig. 3.3.2 A sequence of three or more steps is called a flight of steps. Two flights of steps are connected by a landing. > Fig. 3.3.3 The size of the step is derived from the human stride, and varies in relation to the rise. The dimensions of steps can be experienced very differently according to an individuals stride and depending on whether that person is going up or down the stairs. As early as 1683 the architect Franois Blondel suggested a stride rule for calculating the rise of a step; it is still used today and forms the basis for several standards. For example, DIN 18065 establishes the following formula: 2r + t = 5965 cm. Standard dimensions for steps in buildings, for example 17/29 (given an average stride length of 63 cm), which is seen as ideal for steps in houses, would be very

Rise ratio and dimensions

Paths are replaced by steps from a rise of about 18% or 10. As it becomes difficult to walk along paths easily from a rise of even 12%, one alternative form is stepped paths, which are characterized by a continuous alternation of one step and one platform. > Figs. 3.3.1 and 3.3.4 As outdoor steps are usually constructed with an incline, a distinction has to be made between their height and their incline (height plus incline). The rise is the same as the height only when steps are built without an incline (e.g. inside buildings, or when the steps are

br b

a t

h = step height g = step incline s = rise br = step run t = tread u = nosing l = support Fig. 3.3.2: Steps: terms
h= g= s= b=

Stufenhhe Stufengeflle Steigung Stufenbreite

a = Auftritt u = U nterschneidung l = Auflager

Fig. 3.3.1: Stepped path to the Campidoglio in Rome

l = t + n x 63 c m

a
t f l n h = tread = ight of steps = length of landing = number of steps = step height

la s t s te p

fir s t s te p

Fig. 3.3.3: Flight of steps: terms

244 STRUCTURAL ELEMENTS AND BUILDING METHODS STEPS

100%

21/21 cellar stairs (+ 3 cm undercut) 20/23 steepest domestic stairs (+ 3 cm undercut)

foot irons

ladders

st ep lad d

er s

58%

17/29 comfortable domestic stairs

90

75

15/33 standard outdoor dimensions

irs sta
45 30
rs stai ide outs

14/37 shallowest rise for stairs in and by buildings 12/39 shallow stairs with r = 12 cm according to stride formula 12/46 shallow stairs with r = 12 cm according to Seifert 18%
ramps and stepped paths

10/55 comfortable stairs with shallow rise 12% upper limit for pedestrian ramps 6% barrier-free ramps

10

0%

Fig. 3.3.4: Rises for stairs, ramps and ladders

according to stride formula for stairs in buildings s 9 10 11 12 13 14 15 16 tread t t = 63 2r 45 43 41 39 37 35 33 31 stride length 2h + r 63 63 63 63 63 63 63 63

according to Alwin Seifert for s 17 tread t r = 94 4s 58 54 50 46 42 38 34 30 stride length 2h + r 76 74 72 70 68 66 64 62

Tab. 3.3.1: Comparison of outdoor stair calculations with r 17 according to stride formula (stride length = 63 cm) and according to Seifert (variable stride length)

steep and uncomfortable to climb in the open air. Shallower rises are more appropriate here. > Fig. 3.3.4 But the lower the rise, the greater the length of stride, so that the above-mentioned formula no longer produces satisfactory results for small rises, as studies by Mielke, Seifert or Mader have shown. Alwin Seifert arrived at step dimensions for relaxed walking with considerably longer stride length (Niesel 2003, p. 291). These values can be consulted when designing stairs with a rise of less than 17 cm. > Tab. 3.3.1 Stairs at the entrance to buildings should not rise less than 14 cm, however (rises under 14 cm are not permissible under DIN 18065-1 in and by buildings). Landings are placed between the flights of steps for structuring, changes of direction, or to make walking easier. A landing should be provided after 18 steps at the latest (cf. DIN 18065). The length of the landing is derived

from the tread and the multiple of the of the assumed stride length of 63 cm (l = r + n . 63 cm). > Fig. 3.3.3

Handrails
A handrail must be provided for flights with more than 3 steps. If steps are more than 3 m wide, additional handrails are required in public places. If there is a risk of falling sideways, the handrails must be appropriately braced. > Chapter 3.5 Railings and fences If there is no risk of falling, handrails can also be placed centrally if the steps are wide enough.

Anti-slip precautions and protection against standing water

Specific demands are made on outdoor stairs because of the effects of the weather. To increase safety, appropriate covering materials should be selected to prevent slipperiness. Measure should also be taken to

STRUCTURAL ELEMENTS AND BUILDING METHODS 245 STEPS

drain off precipitation water, which is achieved primarily by inclining the step towards the front edge. The incline should be 13%, but at least 0.5 cm per step. This not only prevents water from standing or ice from accumulating on the step, but also stops water penetrating the foundations, thus restricting damage from freezing water. In order to capture water running off higher areas, and in the case of longer stair structures, drainage gutters should be placed before the top step, and below each individual step in the case of stepped paths. > Chapter 3.11 Flights of steps that are constantly in the shade should be checked particularly carefully in terms of the material used because of the poor drying that can be expected. This applies in particular to steps in wood, metal and stone with polished surfaces, which should be used only in conjunction with antislip surface treatment. Exceptions here are roofed stairs or climatic conditions that admit different construction methods.

CONSTRUCTION METHODS Staircase forms

Straight steps with one or more flights are not the only staircase form. Changes in direction in the flights produce a number of forms for staircases. Such changes are produced by a landing (angled stairs) or by arranging the steps in a spiral. > Fig. 3.3.5 Steps can also be distinguished by their position in the run of walls or on the terrain, and there are also steps with and without protected sides. > Figs. 3.3.63.3.9 Steps without side sections on an embankment are well suited to step shapes that clearly tie into the ground at the sides (e.g. solid rectangular steps).

Loadbearing structures
Steps in the open air are often constructed directly on the subsoil. The load is then transferred either over the whole area via stepped concrete slab foundations

one flight

two flights

quarter turn to the right

two flights, turning left with quarter landing

two flights, turning right with half landing

three flights with half landing

Fig. 3.3.5: Steps with straight and spiral ights

spiral staircase with well

spiral newel staircase, one flight

arched spiral staircase, two flights

three-flight spiral

Fig. 3.3.6: Steps placed in front of a structure, and recessed steps

246 STRUCTURAL ELEMENTS AND BUILDING METHODS STEPS

b c

Fig. 3.3.7: a) Step on embankment b) Step in the embankment c) Self-supporting steps

inclined side

a b stepped side

landing side

Fig. 3.3.8: Run of stringers

Fig. 3.3.9: Sides made of a) concrete, b) natural stone masonry

STRUCTURAL ELEMENTS AND BUILDING METHODS 247 STEPS

Fig. 3.3.10: Schematic diagram of possible loadbearing systems

full foundations/base slab

cross-beam staircase/strip foundation

cantilever staircase

staircase with stringers

single beam staircase

suspended steps

Fig. 3.3.11: Cross-beam staircases: a) grid step on step-welded steel I-girders b) step support placed on top

a b c

Fig. 3.3.12: Stringer staircases: a) solid rectangular steps in natural stone, attached to the wall at the side b) steel side section, with steps welded on at the side c) inserted steps in a wooden staircase, the rst step in natural stone protects against moisture on the oor

248 STRUCTURAL ELEMENTS AND BUILDING METHODS STEPS

Fig. 3.3.13: Spiral staircase with stringers on the Killesberg viewing tower, Stuttgart: steps supported on braced net cables on one side, outer side section constructed as a steel tube works against torsion forces generated, inner side section in at steel

Fig. 3.3.14: Cantilever steps in natural stone

a b

Fig. 3.3.15: Monolithic base slab and steps for concrete staircases: staircase segments, surface in timber formwork a) several monolithic stair segments arranged next to each other, surface in timber shuttering; b) with smooth shuttered surface.

Fig. 3.3.16: Monolithic steps hewn into the rock

STRUCTURAL ELEMENTS AND BUILDING METHODS 249 STEPS

orin the case of narrow or short flight of stepsvia full foundations. Solid rectangular steps can also be placed on strip foundations, where the load from individual steps is transferred via point supportssimilarly to cross-beam steps. > Fig. 3.3.10 In self-supporting staircases, the steps are placed on a reinforced concrete base slab over their full area, or on point supports on one, two or more cross beams. Base slabs and cross beams with an appropriately stepped surface can be prefabricated in reinforced concrete. If timber or steel structures are being used, the necessary support for the steps is created by placing brackets on the cross beams or by creating stepped cross beams. > Figs. 3.3.10, 3.3.11 and 3.3.22 Alternatively the steps can also be fixed between the two supports at the sides of the stairs. > Figs. 3.3.10 and 3.3.12 Cross beams and stringers are commonly manufactured in steel. Timber structures are found less often in the open air because they do not stand up to weathering as well, and are most commonly used in sheltered areas, such as attics inside buildings. > Fig. 3.3.13 Almost all steel section types are used for side-section and cross-beam structures. They are made of flat steel (minimum thickness 10 mm), as hollow or U-sections, or for cross beams also as I-sections. > Fig. 3.3.13 For a cantilever staircase, the steps are fixed into the wall on one side only oraccording to the materialscrewed or welded into a wall or a side section, or fastening with dowel pins. When steps are tied into a wall, the loadbearing capacity is provided by adequate thickness in the steps and the depth to which they are tied in. Hard stone (granite, for example) can project up to 1.50 m. > Fig. 3.3.14 For a spiral staircase, the cantilever steps are carried by a central newel. The steps are connected either to the central newel or via a cylindrical mating part on the steps. Suspended steps hang on cables or rods from the ceiling or a supporting member on one side. On the other side they are anchored by a bracket to a wall or a side section of the staircase. > Fig. 3.3.10 In monolithic stairs, the steps and loadbearing structure are manufactured in a single piece. > Figs. 3.3.15 and 3.3.16 For self-supporting structures, the base slabs, cross beams or stringers are supported on point or strip foundations at the first step. The top of the staircase is often supported on a wall at the last step, or attached to a bracket fastened to the building. If such an approach is impossible, such as in long staircases, intermediate supports must be used. In timber staircases, the first step can be in stone, as structural protection for the timber. > Fig. 3.3.17 For full foundations, stepping the foundation base can reduce material costs, but here it is not possible to exclude different settlement rates, which may produce cracks in the foundations. Stepping should thus be used only on solid ground, and loose ground must not be allowed to slip off. > Fig. 3.3.18 Because construction loads may be distributed unevenly, staircase stringers and the steps themselves should generally be constructed separately. > Fig. 3.3.19 Nonrigid construction methods are particularly suitable for single steps and for small staircases with solid rectangular steps not intended for intensive use. If the footing is not frost-protected, the nonrigid foundation (e.g. gravel sand 0/32) must have frost-protected foundations. > Fig. 3.3.20 On settled, permeable ground, it is possible to provide foundations for the steps on reduced-depth concrete foundation only if there are few steps and low load intensity. Full foundations or strip foundations are then placed on a frost protection layer 1520 cm thick. Alternatively, the first step alone can be supported on a frost-protected strip foundation. > Fig. 3.3.21 Wooden steps must be supported either on a stone base or a steel foot. Again, both variants must have stable, frost-protected foundations. > Fig. 3.3.22, and chapter 2.3 Connections

Step types
Various types of steps are used, depending on the loadbearing structure and the material. Almost every type of step can be executed in stone. Wood and steel are used mainly for slab steps and for variations on them. > Fig. 3.3.23 For solid rectangular steps it makes sense to use a nosing or undercut. The setback line at the front of the step forms a dummy joint, making the step look lighter, and easier to walk on. > Fig. 3.3.24

Foundations
Foundations for steps should be frost-protected, and in exceptional cases frost-resistant as well, on a horizontal foundation base on loadbearing subsoil (settled ground or compacted subsoil). The foundation type is chosen in relation to the location and the anticipated loading. Frost-protected, rigid foundations in concrete should always be provided if large loads are anticipated, a staircase is being built on a public site, or long flights of steps are planned. > Chapter 2.2, foundation base slabs or strip foundations are usually deployed for large staircases, to minimize excavation work and material costs for the foundations. Foundations are protected against frost by concrete strip foundations under the first and last steps in the case of foundation base slabs.

fro r st f

frost free

Fig. 3.3.18: Stepped foundations (only on settled ground!)

ee

STRUCTURAL ELEMENTS AND BUILDING METHODS 445 VERTICAL PLANTING

3.13 VERTICAL PLANTING

Vertical planting means growing climbing plants on more or less vertical sections of buildings or in the spaces between them. This includes planting on traditional arbors and pergolas, and on walls, industrial halls, multistory car parks, and sound insulation screens. Climbing plants grow upwards towards the light. Rapid growth in terms of length not matched by equivalent thickness serves them well as a tactic, which they have evolved from adapting to dark forest locations as their original habitat. The disadvantage here is that they continue to depend on a support.
Although upward growth predominates at first, some perennial climbing plants grow strikingly in thickness as well (increased diameter).

A distinction can be made between two typical climbing strategies: that adopted by tendril climberplants with tendrils or other parts used for attaching themselves that still require support if they are to be planted on a walland autonomous, self-supporting climbers. > Fig. 3.13.2 One alternative here is another facade planting type, protected by copyright, developed a few years ago by botanist Patrick Blanc: Le Mur Vgtal. He chooses not to use climbing plants here, and the plants used are not in the usual soil. Instead, special light plastic elements mounted in frames on the facade take over the mechanical aspect of soil function. In this way an opaque green wall is created, automatically soaked

climbing plant growth height 14 m (used on the base/ground oor zone, for single-story houses, for penthouses, in plant troughs, etc.)

Clematis alpina Actinidia kolomikta Clematis tanguitica Jasminum nudiorum Lonicera brownii Clematis viticella Clematis Hybriden Rambler roses Lonicera heckrotti Lonicera henryi Lonicera caprifolium Lonicera periclymenum

climbing plant growth height 4 m (used for tall buildings) 25 m 20 m 15 m 10 m 5m

Lonicera tellmaniana Clematis montana Aristolochia macrophylla Campsis radicans Vitis coignetiae Wisteria oribunda (Clematis vitalba) Vitis spec. Celastrus orbiculatus (Fallopia aubertii) Parthenocissus tricuspidata Hydrangea petiolaris Parthenocissus quinquefolia Wisteria sinensis

Fig. 3.13.1: Growth heights for climbing plants

446 STRUCTURAL ELEMENTS AND BUILDING METHODS VERTICAL PLANTING

specially attractive blossom evergreen Campsis radicans (better with trellis) shed foliage also in shade Euonymus fortunei spp. Hydrangea a. petiolaris (better with trellis)

forms robust wood

1. SELF-SUPPORTING CLIMBERS

b) on rough surface, root climbers

low

(better with trellis) 1. DIRECT CONNECTION WITH THE WALL at growth also in shade

Hedera helix

a) on smooth surface, sucker climbers low

at growth

Parthenocissus tricuspidata and qu. Engelmannii (no trellis) Clematis hybrids

a) with climbing aidtendrils

Vitis vinifera

bushy

Parthenocissus quinquefolia

PLANT CHOICE Perennial woody plants, growth characteristics

Clematis montana and vitalba

Akebia spp. 2. INDIRECT CONNECTION WITH THE WALL TRELLIS CLIMBERS bushy

low

Lonicera spec. Lonicera henryi Fallopia/ Polygonum aubertii

2. b) CREEPERS

b) with climbing aidcreepers

also in shade

Aristolochia durior

bear fruit

Actinidia spp.

Celastrus orbiculatus

Wisteria sinensis

Jasminum nudiorum

2. c) SPREADING CLIMBERS

c) with climbing aidspreading

low

Rubus

AUTUMN COLOR

climbing roses 3. FREE-STANDING PLANTS

3. NO CONNECTION

shed foliage

Fig. 3.13.2: Choice of plants

STRUCTURAL ELEMENTS AND BUILDING METHODS 447 VERTICAL PLANTING

Fig. 3.13.3: Facade planting with cable-net structures covering the whole area

First-class industrial products for fixing tendril elements combined with the ideal qualities of these conquerors of clear space make perennial climbing plants more attractive than ever for use in the urban environment. Consequently vertical planting, with roof planting, offer excellent ways of compensating for the lack of greenery in densely built-up areas. This is particularly true in megalopolises, where the underground car parks in the towering buildings and the general scarcity of land mean that open spaces are increasingly sited in artificial locations.

CREATIVE AIMS
Planted facades change the surroundings and outward appearance of buildings. This raises questions about the creative aims, which are particularly strongly associated with specific plant qualities in the case of vertical planting. Should the growth be spread evenly? Is it about filigree green lines? Should a three-dimensional, apparently solid structure be created? Is the idea airy light green or compact dark green? Should the full height of the building be planted, or just part of it (e.g. just the ground floor)? Is the situation sunny or shady? Considerations of this kind affect the choice of plants. > Fig. 3.13.1 Growth across a whole area is best achieved with autonomous climbing plants. Both dark, evergreen ivy (Hedera) and also the fresh green Boston Ivy (Parthenocissus tricuspidata Veitchii) are able to cover entire buildings on their own. But if full growth over a wall is to be achieved with trellis climbers alone, the whole facade area should be fitted with trellis or cable-net structures. > Fig. 3.13.3 Linear planting can be achieved with a few single cables, rods or narrow grids running in parallel. Here the structures must no always run vertically, diagonal spillikin-style cables within a space create an interesting effect. But plants are less inclined to climb at angles under 45. Particularly suitable for linear planting are creepers (Actinidia, Akebia, Aristolochia, Celastrus, Wisteria), and trailing plants such as Parthenocissus quinquefolia. If the cable is fitted with stoppers the plants are less likely to slip off. > Fig. 3.13.4 The architectural plasticity of a building can be enhanced by emphasizing projections on the building with planted steel elements or grids; recesses can be deepened with dark ivy. To create combined planting, linear and more expansive elements are brought together or used in parallel for structuring. A wide range of possible combinations is available here: constructions made up of cables, steel cable-nets, carbon steel mats, perforated sheet metal, or expanded meta or stable grids (NB: plants that grow to large diameters need sufficiently large apertures) can be developed, in combination with linear, vertical or diagonal steel rods, or with weatherproof fiberglass rods. Where there are distances between individual supporting elements to be bridged, it should be remembered that climbing plants cannot cope with unduly wide gaps, so the sections of the structure should not be more than 3050 cm apart.

Fig. 3.13.4: Stainless steel wire cable stoppers, Nordspangenpark, Graz

Fig. 3.13.5: Mur Vgtal

with water and fertilizer, and planted over its full area with a variety of low plants adapted to steep locations. (2002, sensio, Paco p. 257) > Fig. 3.13.5 A lot of arguments can be cited in favor of vertical planting: aesthetic and micro-climatic reasons, protecting facades against heavy rain, the desire for shade and the beneficial effect of planted, green facades on the psyche.

448 STRUCTURAL ELEMENTS AND BUILDING METHODS VERTICAL PLANTING

Fig. 3.13.6: Green scenic effect in an inner courtyard

Fig. 3.13.7: Claret leaves in Virginia creeper

Fig. 3.13.8: Ivy

Low-climbing plants can also be used for partially greening tall facades if adequately large, water plant containers are attached on the higher levels. Sculptural vertical planting based on stainless steel wire cables can make a scenic effect between buildings or posts. The volume, almost invisible at the beginning, initially materializes as a result of the plant growth. > Fig. 3.13.6 One important design motif can be the color of climbing plants, showing up in different green foliage shades, the color of the blossom and to an extent in very marked autumn coloring (claret, fox-red, yellow). > Fig. 3.13.7

Boston Ivy is striking because of its precisely defined appearance: no other climbing plant grows so flat, in a way that is reminiscent of a roof shingle run. > Fig. 3.13.9 Tiny anchor discs enable this climbing plant to cover entire walls with its trilobate foliage even without a trellis. Boston Ivy has no trouble in climbing to heights of 1520 m. Shade spurs it on to grow even more quickly, and it rapidly develops real trunks. The branches in the darker areas then lose their leaves, and the wall or support structure then catch peoples eyes. > Fig. 3.13.10

Spreading climbers
Spreading climbers, such as sun-loving climbing roses, jasmine and blackberries are appealing because of their abundant, pretty blossom. As they grow to only about 5 m high, they can be used practically speaking only for partial planting for something like the height of

Typical appearance
The plants characteristic climbing strategy and habit in combination with the wall or the trellis structure created typical vertical planting images. They can generally be trimmed to the desired shape.

Self-supporting climbers
Ivy (Hedera helix) is a particularly robust, shade-loving root climber, with dark green foliage. It can create dense, enormously high evergreen walls (up to 30 m) if it is allowed to develop freely. Its ample multiple fruits are attractive, though these do no appear until the plant is a few years old, and they make the plant more vulnerable to storms. > Fig. 3.13.8 Care is needed however: ivy is top of the rankings for plants that cause damage (cf. Althaus). Walls that are already slightly damaged make ideal victims. The trumpet vine (Campsis radicans) also climbs with anchoring roots and tends to develop into a kind of extended tree crown. The plant produces striking orange trumpet flowers on the sunny upper side. Its roots can penetrate cracks and joints in the wall and cause damage. A light structural support should be provided to prevent storms from tearing parts of the plant off the wall. The climbing hydrangea (Hydrangea petiolaris) attaches itself to rough walls, cracks and joints with its anchoring roots. It is shade-loving and slow-growing, develops a full and pendulous appearance with attractive, protruding corymbose cymes, which makes the plant vulnerable to being torn off in storms and under snow, which is why structural protection should be afforded.

Fig. 3.13.9: Parthenocissus tricuspidata Veitchii

Fig. 3.13.10: Protective grid for Parthenocissus tricuspidata Veitchii

STRUCTURAL ELEMENTS AND BUILDING METHODS 449 VERTICAL PLANTING

a jungly-tropical image with its very large, light green leaves. > Fig. 3.13.12 The climbing oriental bittersweet (Celastrus orbiculatus, Celastraceae) is a green summer creeper with an alarming name in GermanBaumwrger, tree strangler. Care is needed if actually planting oriental bittersweet by trees, as the plant quickly takes over the crown, and soon only the bittersweet leaves can be seen. This false crown looks pretty when it turns yellow in the autumn, but the host tree quickly suffers from the lack of light. Young trees can be literally choked by the plant in their trunk area, so the experience can be bittersweet indeed. Celastrus (also known as Campsis or Wisteria) is a good choice, however, when the design intention is to create little false trees on an interesting substructure. > Fig. 3.13.13 Horticultural species of clematis hybrids (Fam. Ranunculaceae) attract attention with their large flowers, but they grow slowly and thus remain small. The much more vigorous Clematis Montana carries an abundance of smaller flowers and crochets itself gracefully around the trellis structures. Travelers Joy or Old Mans Beard (Clematis vitalba) forms a green ball over a wild entanglement of branches, with new shoots constantly appearing above older twigs on its side facing the sun, so that the plant increasingly trails. It is also striking in winter when it has no leaves and the whitish blossom glows in the sunlight. This wild variety grows higher, winding itself around every little branch or projecting object.

Fig. 3.13.11: Climbing rose on horizontal wooden trellis

a single floor. Because individual branches spread over the trelliswork they always tend to look a little messy and unkempt. A climbing construction made up of horizontal slats, cables, rods or a large-mesh grid structure is needed to prevent the thorns or protruding side shoots from slipping off. > Fig. 3.13.11 Winter jasmine (Jasminum nudiflorum, fam. Oleaceae) tends to be overhanging, with its shoots hanging down in curves up to 2 m long.

Creepers
If left to their own devices, creepers tend to look bushy, but they can be confined to a more disciplined shape by trimming. But the plants must be accessible for trimming purposes, which can be a limiting factor in terms of height. The shade-tolerant pipevine (Aristolochia macrophylla, fam. Artistolochiaceae) radiates the refined elegance of classical plants in arbors, and at the same time creates

Fig. 3.13.12: Aristolochia macrophylla

Fig. 3.13.13: Wisteria as a false small tree on a substructure

STRUCTURAL ELEMENTS AND BUILDING METHODS 457 GREEN ROOFS

3.14 GREEN ROOFS

The field of green structure incorporates green roofs and facade greening. Their historical predecessors are Scandinavias earth and turf lawns, and the green roofs of the Middle East, such as the Hanging Gardens of Babylon. Green roofs have become more widespread with the development of roof seals and root barriers and the emergence of the ecology movement that followed the 1960s. > Fig. 3.14.1 Green roofs compensate for interventions in the landscape and provide plants and animals with new habitats in an urban environment. They are an important aspect of sustainable building planning. Compared with conventional roof constructions, they improve roof protection and building insulation. > Fig. 3.14.2 Developing areas above other structures, such as terraces, inner courtyards and roofs, creates usable open space. The retentive properties of green roofs also allow water to be better managed. Rainwater runoff is slowed down and reduced, leveling out spikes in precipitation

and taking the pressure off channeling systems. 4060% annual mean water retention is created by extensive green roofs, 6090% for intensive green roofs. Consequently the microclimate also improves, as the increase in water vapor balances extremes of temperature and the vegetative surface filters fine dust and heavy metals out of the air.

FORMS OF GREEN ROOF

Technical requirements (roof incline, roof load), climatic conditions in context (amount of precipitation, exposure, wind direction, etc.) as well as intended function and desired appearance determine the type of green roof. A distinction is made between extensive green roofs, simple intensive green roofs, intensive green roofs and hard surfaces. > Figs. 3.14.33.14.5 An extensive green roof is indicated when a roof will only tolerate minimal superstructure and loads, and the roof is not intended to be walked on. Creating and

Fig. 3.14.1: Extensive sloping green roof: in the tradition of grass roofs

Fig. 3.14.2: Construction intervention in a sensitive landscape compensated for by green roofs

Fig. 3.14.5: Intensive roof greening in an inner courtyard

Fig. 3.14.3: Extensive greening with minimal structure (light roof)

Fig. 3.14.4: Small-scale simple intensive greening of a carport with water surfaces

458 STRUCTURAL ELEMENTS AND BUILDING METHODS GREEN ROOFS

maintaining these is comparatively inexpensive. Except during the growing phase, maintenance is extensive. The superstructure layers are 5 to approximately 15 cm thick. An extensive green roof imposes functional loads on the roof construction of from 60 kg/m2 to approximately 240 kg/m2. Due to the minimal structure and the extensive maintenance, only very robust and droughtresistant plants are used. Shrubs, grasses, lichens and mosses or, more rarely, ground-covering woody plants are used. Many of these plants originate in high alpine locations. > Figs. 3.14.6 and 3.14.7 Simple intensive green roofs are the intermediate form of extensive and intensive green roofs. They can be used where a high roof load is possible (180300 kg/ m2) and a varied range of plants is desired. As well as plants used in the extensive green roof, low woody plants and more demanding shrubs can be used. Simple intensive green roofs involve superstructures of about 1525 cm. When designing a simple intensive green roof, its more labor-intensive care, especially with regard to watering and fertilizing, must be taken into account. > Fig. 3.14.8 With an intensive green roof, there are practically no limits as regards functionality or use of plants. A loadbearing roof is required, with a capacity of over 300 kg/ m2. Depending on construction, this can be increased to 1500 kg/m2. As well as the plants already mentioned, bushes, small trees and lawn areas can be included. Adequate watering, usually involving water accumulation or irrigation systems, is invariably necessary. Height of superstructures varies from about 25 cm to 150 cm in some cases. > Fig. 3.14.9 For lawns a layer thickness of 1520 cm is adequate in exceptional cases, if one is prepared to put up with a higher degree of maintenance (Kolb and Schwarz 1999, p. 52). Hard surfaces and terraces are often created in combination with intensive green roofs. Fig. 3.14.10. Roof load permitting, asphalt, paved or tiled paths, wooden decking or enclosing walls are possible. These surfaces and components usually have the same substructure as the intensive green roof.

6 1 planting 2 approx. 7 cm extensive single-course substrate 3 lter course/mat 4 2.5 cm solid drainage 5 protective course 6 superstructure (warm roof): roof seal (root-proof) thermal insulation vapor seal reinforced concrete

Fig. 3.14.6: Standard extensive green roof structure

1 planting 2 approx. 20 cm extensive single-course substrate 3 lter course/mat 4 approx. 2.5 cm drainage course 5 protective course 6 superstructure (warm roof): roof seal (root-proof) thermal insulation vapor seal reinforced concrete Fig. 3.14.8: Standard simple intensive green roof structure

1 planting 2 approx. 25 cm extensive single-course substratet 3 approx. 30 cm mineral subsoil substrate 4 lter course/mat 5 approx. 15 cm drainage course 6 protective course 7 superstructure (warm roof): roof seal (root-proof) thermal insulation vapor seal reinforced concrete Fig. 3.14.7: Extensive green roof containing many species in an ecological housing development Fig. 3.14.9: Standard intensive green roof structure Fig. 3.14.10: A variety of green roof types on different levels of a building

STRUCTURAL ELEMENTS AND BUILDING METHODS 459 GREEN ROOFS

1 roof planting structure (extensive): planting vegetation support course lter course/mat drainage course protective course superstructure: 2 roof sealing (root-proof) 3 thermal insulation 4 vapor seal 5 reinforced concrete roof Fig. 3.14.11: Standard warm roof construction

1 roof planting structure (extensive): planting vegetation support course, lter course/mat drainage course, trickle protection/separation eece structure open to diffusion superstructure: 2 thermal insulation 3 roof sealing (rootproofonly in areas with penetration) 4 waterproof concrete (White Tub)

Fig. 3.14.15: Standard watertight concrete roof construction

CONSTRUCTION REQUIREMENTS AND CONSTRUCTIVE ELEMENTS

1 2 3 4 5 6

Roof types and loadbearing capacity

1 roof planting structure (extensive): planting vegetation support course lter course/mat drainage course protective course superstructure: 2 roof sealing (root-proof) 3 thermal insulation 4 vapor seal 5 trapezoidal sheet metal 6 steel section

Fig. 3.14.12: Standard warm roof construction (light shell)

1 roof planting structure (extensive): planting vegetation support course (e.g. light substrate) lter course/mat drainage course protective course superstructure: 2 roof sealing (root-proof) 3 timber substructure 4 thermal insulation 5 vapor seal 6 beam course 7 reinforced concrete roof

Fig. 3.14.13: Standard cold roof construction

1 roof planting structure (extensive): planting vegetation support course lter course/mat drainage course trickle protection/ separation eece structure open to diffusion superstructure: 2 thermal insulation 3 protective course 4 roof sealing (root-proof) 5 reinforced concrete roof

Fig. 3.14.14: Standard inverted roof construction

When planning a green roof, the first thing to do is to check the construction and loadbearing capacity of the roof. For new structures, the intended form of green roof should be determined at an early stage, so that the roof can be designed accordingly. It should be ensured that the required roof seals are designed to be impenetrable to roots. For a warm roof, the roof seal is above the thermal insulation, which in turn lies atop the loadbearing construction. This form of roof is widespread and is generally suitable for green roofs without special requirements. The thermal insulation must be able to tolerate the pressure. A vapor barrier should be installed above the roof skin, covering the above-ground construction, as otherwise condensation water may get into the building. > Fig. 3.14.11 A single-shell roof with no thermal insulation is different from a warm roof in that insulation and vapor barrier are absent. This roof form is used, for instance, in underground garages and unheated outbuildings. Given sufficient loadbearing capacity, this creates no problems for a green roof. As the roof may freeze through, cold-sensitive plants should not be included. > Fig. 3.14.12 For a cold roof (also known as a multishell roof), condensation is prevented from forming during roof construction by ventilation slits above the insulation. As an additional layer beneath the roof seal, usually a light wood construction, is involved, this often means that only an extensive green roof is possible. > Fig. 3.14.13 The inverted roof is a special case. Here, thermal insulation is above the roof seal. This means that the watercarrying layer is beneath the insulation, which in turn means that all materials used for the green roof must allow diffusion. If this is borne in mind, all forms of green roof are possible. > Fig. 3.14.14 With watertight concrete roofs, as with inverted roofs, the insulation is on top of the roof skin, or is absent. Watertight concrete gives the optimum protection from condensation and root damage. This makes whole-surface roof seals, vapor barriers and root barriers unnecessary. The watertight cement roof is generally suitable for all forms of green roof. Any openings and joints in the roof should be protected by a locally applied rootproof seal. > Fig. 3.14.15

460 STRUCTURAL ELEMENTS AND BUILDING METHODS GREEN ROOFS

a b

Fig. 3.14.16: Flat roof renovation: a) condition before renovation, b) following green roof implementation

Fig. 3.14.17: Sloping green roof

Fig. 3.14.20: Intensive sloping green roof with turf and integrated guttering

Fig. 3.14.21: Installing a claw mat to prevent slippage

Roof incline and pitch

Roof incline is an important technical consideration in choosing a green roof. Roofs with 02% roof incline are particularly suited to intensive green roofs with wateraccumulation irrigation. Tolerances in building construction do not preclude puddles forming at the drainage layer. For this reason, the roof seal should be laid to measure especially and a drainage level should always be provided (the same applies to extensive green roofs!). Roofs with 25% incline are generally optimal for green roofs and are also favorable for water retention. Where water accumulation irrigation is in place, water accumulation thresholds may have to be provided. The roof pitch means that excess water quickly flows out of the drainage system. Where construction tolerances permit a siphon effect or insufficient downward water movement, these must be eliminated.

Depending on steepness, measures relating to water retention and delivery as well as slippage prevention should be put in place for sloping roofs with a 558% incline. These begin with shear barriers at drainage level and extend to the upper vegetation layer, with erosion resistant weaves or similar measures. For more demanding vegetation types and intensive utilization, rooftop irrigation should be put in place. In principle, a variety of green roof forms are possible given careful planning. > Figs. 3.14.173.14.21

Watering and drainage systems

The number and placement of drainage installations such as roof drains, roof guttering, water spouts, and emergency overflows is a function of the structures pitch and the green roofs construction. Roof drains on the roof skin should be designed to be visible via

1 1 2 3 4 5

roof planting structure (extensive): 1 vegetation mat 2 approx. 8 cm extensive substrate 3 anti-slippage system 4 drainage mat 5 superstructure (warm roof): roof seal (root-proof) thermal insulation vapor seal reinforced concrete Fig. 3.14.18: Standard extensive sloping roof construction

roof planting structure (intensive): 1 pre-cultivated turf 2 rooting fabric 3 approx. 17 cm lawn substrate 4 anti-slippage system 5 protection for structure and drainage mat 6 separation and sliding membrane 7 superstructure (waterproof concrete roof): bituminous adhesive seal waterproof concrete Fig. 3.14.19: Standard sloping roof lawn construction

STRUCTURAL ELEMENTS AND BUILDING METHODS 461 GREEN ROOFS

a b

Fig. 3.14.22: water draining from a sloping roof into an outer gutter: a) construction phase with shear barriers, b) nished green roof

Fig. 3.14.23: Water channel molding

Fig. 3.14.24: Drainage and inspection shaft

6 1 2

7 3 4 5 1 2 3

7 4

8 5 6

1 slab surface structure: concrete slab (60 x 30 x 3.5 cm) natural stone chippings solid drainage drainage gutter building protection mat 2 plant bed framed with steel wall, waterproof screw attachment to mortar strip foundation 3 intensive planting by accumulated water lter mat (plastic ber) drainage course solid drainage

building protection mat 4 inspection shaft (30/30) with accumulated water 5 superstructure (waterproof concrete): roof seal (root-proof) reinforced concrete 6 area without water accumulation 7 area with water accumulation 8 top edge of accumulated water 5 cm under bottom edge of intensive substrate

1 pavement laid in area without water accumulation: approx. 3 cm chippings 2/5 crushed stone 2/32 building protection and drainage mat (car type) 2 superstructure (waterproof concrete): roof seal (root-proof), screed (outside water accumulation), reinforced concrete 3 steel band in point foundation (C12/15) 4 ber concrete angle (15/15) on mortar bed (C12/15), root protection strip glued to angle 5 intensive planting in water

7 8 9

accumulation area: plant bed approx. 3741 cm, intensive substrate, lter mat (plastic ber), approx. 15 cm drainage course, building protection mat/protection mat superstructure (waterproof concrete): roof seal (root-proof), reinforced concrete area without water accumulation area with water accumulation top edge of accumulated water 5 cm under bottom

Fig. 3.14.25: Water accumulation on roof with 0% incline

Fig. 3.14.26: Water accumulation with above-ground drip lip

462 STRUCTURAL ELEMENTS AND BUILDING METHODS GREEN ROOFS

Fig. 3.14.27: Irrigation machine in shaft

Fig. 3.14.28: Inspection shaft for a simple water accumulation irrigation device

inspection shafts in the surface. Gravel traps or similar measures should be used to ensure that the roof drains do not become clogged. For sloping roofs, both inner and outer gutters are possibilities. In case of curves in the pitch of the roof, special drainage layers should be provided. > Figs. 3.14.223.14.26 Irrigation systems must also be suitable for the type of green roof and for the structure. Accumulation barriers are used, some already integrated into the structure of the roof construction, but installations for automatic water accumulation, recessed sprinklers, or drip irrigation can also be added. Ducts should be provided within the roof and inside the building for water delivery and control leads. For extensive green roofs, at least one water outlet is required for manual watering. > Figs. 3.14.27 and 3.14.28

Edge formation, fire prevention and wind action

In edge formation for green roofs, a distinction must be made between junctions and terminations. Junctions are found around rising components and those that penetrate the roof, e.g. chimneys. Roof seals and root barriers of at least 10 cmor, for roofs with less of an incline, as much as 15 cmabove the upper edge of the top layer or the green roof should be introduced in these areas. In order to avoid excessive swelling caused by water release, the water-carrying layer can be lowered by means of gratings. > Fig. 3.14.29 The terminations are at the lateral roof edges (attic story). Roof seals and root barriers5 or 10 cm above the water-carrying layer, depending on the roofs inclineshould be introduced in these areas,

OKFF +0.00

OKFF -0.03
15,0 cm 15,0 cm

30,0 cm

1 interior with threshold 2 steel gutter with gravel trap and packing: water-bearing course 15 cm lower 3 superstructure (warm roof) roof seal (root-proof) slanting thermal insulation (foam glass sheets) vapor barrier

4 natural stone slab surface crushed sand 0/5 crushed stone 2/32 drainage mat protective course

1 extensive planting in attic area: planting approx. 7 cm extensive single-course substrate lter course/mat 2.5.cm solid drainage protective course 2 edging strip on attic oor: gravel strip (80 x 5)

gravel 8/32 protective layer 3 superstructure (warm roof): roof seal (root-proof) thermal insulation vapor barrier reinforced concrete 4 sheet metal covered attic storey with seal to a height of 15 cm

Fig. 3.14.29: Junction with terrace door with low threshold

Fig. 3.14.30: Junction with attic

STRUCTURAL ELEMENTS AND BUILDING METHODS 463 GREEN ROOFS

Fig. 3.14.33: Attic story edging strip with lawn paving on gravel to resist wind drag

Fig. 3.14.31: Edge strip of gravel and kick plates bordering a rising structural component

Fig. 3.14.32: Damage caused by wind drag

7 1 superstructure: sheet metal covered attic storey with seal to a height of 30 cm 2 edging strip on attic storey: gravel (8/32) lter course/mat drainage element (unlled) protective course 3 edging strip to resist wind suction erosion protection fabric lawn grid 40 x 60 x 11 4 extensive roof planting: planting with shallow balls approx. 10 cm extensive substrate lter course/mat drainage element (unlled) protective course 5 re protection strip (where re cells necessary) 6 edging strip on facade (W = 50 cm) gravel 8/32 gravel strip lter course/mat drainage element (unlled) protective course 7 facade with seal 15 cm high and parapet/window ( 80 cm)

30 cm

100 cm

50 cm < 80 cm

Fig. 3.14.34: Extensive green roof: re prevention, wind drag protection, junctions with attics and rising components

10 cm

Fig. 3.14.35: Rope anchor safety system anchored to solid drainage system

15 cm

Fig. 3.14.36: Personnel protection involving rope anchorage systems

and vegetation-free stripsgenerally should be included. > Fig. 3.14.30

30 cm wide

Intensive green roofs are considered hard roofing due to their irrigation, and therefore require no special fire precautions. Extensive green roofs have shorter maintenance intervals and more minimal construction. They are therefore at greater risk from airborne burning matter. For this reason, the junctions must be provided with vegetation-free protective strips of gravel or tiles 50100 cm wide. > Fig. 3.14.31

For loosely laid roof layers, particularly in inverted roofs, precautions should be taken to ensure that the whole roof construction is safe from wind drag. Roofs above 20 m eaves height as well as the corners and edges of the green roof should be protected against wind drift by laying vegetation-free strips (e.g. heavy tiles), or by using filled-in lawn paving or vegetation mats. In exposed areas, the need to increase the weight of superstructures (as protection against wind load) may have to be balanced with the static roof load that can be tolerated. > Figs. 3.14.323.14.34

464 STRUCTURAL ELEMENTS AND BUILDING METHODS GREEN ROOFS

Fall protection should be provided for all green roofs. This may comprise either secure rails or special systems of holds for maintenance work, such as rope sockets and rope anchors. > Figs. 3.14.35 and 3.14.36 These are usually made of plastic or screed. If the roof seal is not rootproof, root barrier sheets are also included in the protective plies. > Figs. 3.14.37 The function of the drainage layer is to conduct precipitation water away evenly so that no waterlogging occurs. The aim is controlled storage of water for use while expanding the area for roots. The drainage layer may be formed of natural mineral substances such as sands, gravels or lava, or synthetic mineral substances such as expanded clay, expanded slate, or recycled substances. Drainage layers made from artificial substances, such as hard plastic tiles or foam drainage tiles are also in common use. It is possible to combine these materialsfor instance, by filling in plastic storage elements with mineral bulk materials. > Figs. 3.14.38 and 3.14.41

DESIGNS AND LAYERS IN GREEN ROOFS

A fundamental distinction is made between single-layer and multilayer designs. One-layer designs consist of a vegetation base layer, which performs both drainage and filtration functions, and sometimes supplementary protective and filtering fleeces. Depending on the construction chosen, the following elements are found in a multilayered construction method: Protective plies protect the roof seal from mechanical damage, especially during the construction phase.

Fig. 3.14.37: Protection and storage eece

Fig. 3.14.38: Drainage mats for use on inclined roofs

Fig. 3.14.39: Solid drainage system for extensive green roof, 2.5 cm thick with protective and ltration eeces

Fig. 3.14.40: Solid drainage system for transport routes (1.2 cm) with mounted ltration eece

Fig. 3.14.41: Expanded slate 8/16 for drainage layers

Fig. 3.14.42: Predominantly mineral substrate for one-layer extensive green roof

STRUCTURAL ELEMENTS AND BUILDING METHODS 465 GREEN ROOFS

1 roof planting structure (intensive): approx 20 cm intensive substrate lter course/mat approx. 6 cm drainage course 2 steel band in point foundation (C12/15) 3 wooden terrace structure: wooden planks fastened with V2/A torx screws beam course stiffening plank point foundation with post supports, support base (galvanized with n) protective layer under point foundation 4 superstructure (waterproof concrete roof): roof seal (root-proof) sloping screed reinforced concrete

1 paving 2 approx. 3 cm chippings 2/5 3 approx. 20 cm crushed stone 2/32 4 building protection and drainage mat (car type) 5 superstructure (waterproof concrete) roof seal (root-proof) sloping screed reinforced concrete Fig. 3.14.43: Paved surface, able to take weight

Fig. 3.14.44: Wood covering at junction with lawn

4 1 interior with threshold 2 steel grating as facade gutter 3 terrace structure: natural stone slabs metal angle as support for cantilever arm cantilever arm in galvanized steel, material approx. 2 mm thick stilt course, adjustable height with joint dividers protective course in stilt course area building protection mat 4 superstructure (warm roof) roof seal (root-proof) sloping thermal insulation (foam glass sheets) vapor seal reinforced concrete

OKFF +0.00

OKFF -0.03
15.0 cm

Fig. 3.14.45: Terrace covering on stilt bearing, door junction

In multi-layer superstructures, the filtration layer filters out sediments, e.g. humus substances, in order to safeguard drainage layer function in the long term. Geotextiles are commonly used. > Figs. 3.14.41 and 3.14.42 The vegetation base layer is where the plants are actually located. It must be structurally stablei.e. it must not be allowed to sag. Its plant substrate therefore has significantly lower levels of humus. For one-layer extensive green roofs, the FLL guidelines stipulate no more than 4% organic substances. This value can reach 612% for multi-layer designs, depending on design and gross density. As for grain size distribution, the allowed percentage of fine-grained sand and clay components is greater for intensive green roofs (max. 20%) than for extensive green roofs (max. 7%). The goal is good permeability together with optimum water retention. Topsoil mixtures with grain size distribution and humus content that meet the above requirements, e.g. which contain a high proportion of sandy soil, can be used for the vegetation base layer. The use of mineral bulk materials such as lava, pumice and expanded slate or recycled substances such as crushed brick with added organic substances and clay is widespread. > Figs. 3.14.433.14.45 Hard surfaces and timber decking are often constructed in combination with the plant surfaces, especially in intensive green roofs. This means that the protective layer, and usually the drainage and filtration layers as well, are always continued beneath the hard surface to permit unobstructed water flow. For water accumulation irrigation, however, the drainage layer is interrupted at the accumulation threshold. Paved and tiled surfaces can be laid in chippings directly on protective fleeces or filtration layers. Alternatively, adjustable-height stilt bearings are possible. This allows weight to be reduced, but reduces the loadbearing capacity of the surface. This may have to be balanced out by laying a thicker tiled surface.

Constructing Landscape is a systematically structured reference work about the techniques and theories applied when constructing outdoor spaces. All the relevant topics are vividly covered, from materials and surfaces via building outdoor features to the use of plants. The book shows how landscape designers and architects can implement their creative ideas with expertise and technical skill. Constructing Landscape is in three parts: Materials, The principles of loadbearing structures and Structural elements and building methods. The rst part surveys various building materials used in landscape architecture, and their specic qualities. Surface properties and possible working modes are also discussed. The next section explains the fundamental principles of statics, joints for loadbearing elements, foundations for structural components, and supporting structures. The third chapter is devoted to the principles of construction and techniques associated with various structural elements. A large collection of realized sample projects illustrates particular building tasks with photographs and plans. The editor Astrid Zimmermann is a freelance landscape architect, and an academic assistant in the Department of landscape and building construction at the TU Berlin until 2008. She has assembled a group of expert authors with considerable experience in planning and teaching for this work.

9 783034 607209