1.

ABOUT THE INSTITUTE The North Eastern Regional Institute of Science and Technology (NERIST) is a unique Institute of its own kind in the country, having unconventional and innovative academic programmes. It was established in 1983 by the Government of India. Its foundation stone was laid by former President of India Late Giyani Zail Singh on 4th March 1984. The Institute was set up initially as a project of the North Eastern Council for providing a system of education to create technical manpower at various levels for the development of the North Eastern Region of the country. Its approach is to encourage a policy of vocationalisation at the +2 level and to allow motivated students to go for degree level while others to go out of the Institute to enrich their profession with some years of industrial experience. It is an autonomous, fully funded and controlled by the Ministry of Human Resource Development (MHRD), Govt. of India from April 1, 1994. It got the status of deemed to be university on 31st May 2005 under section 3 of the UGC Act 1956. It is governed by the Board of Management (BoM) comprising the representatives of the MHRD, Govt. of India, the eight beneficiary states of the North Eastern States, AICTE and eminent educationists. It is fully residential, and is spread over in 513 acres of land. Academic programmes in the Institute started in August 1986 with the first batch of students admitted to its Base Module. Till July 2010, nineteen batches of graduates with specialization in Agricultural Engineering, Civil Engineering, Computer Science and Engineering, Electronics and Communication Engineering, Electrical Engineering, Mechanical Engineering and Forestry have passed out and many have been placed in different reputed organizations at national and international levels. 2. LOCATION The Institute is located in a picturesque valley at the foot-hills of the Eastern Himalayas, and is situated at Nirjuli (Itanagar) in the Papum Pare district of Arunachal Pradesh on National Highway 52A. It is about 390 km from Guwahati (Assam) and 10 km from Banderdewa, the Entry Gate to the Capital Complex, Itanagar (Arunachal Pradesh). From the Institute, the Capital town, Itanagar is about 20 km onward.
1

Arunachal Pradesh being the land of exotic orchids and lush green hills, it provides an ideal setting for a seat of technical institution in a backdrop of quiet and pristine surroundings. The Institute can be accessed by rail, road or air from Guwahati through Harmuty Railway Station, North Lakhimpur, and Tezpur and Lilabari(North Lakhimpur), respectively. Super Deluxe buses are available daily to and from Guwahati. Taxi can also be hired at Guwahati to reach the Institute. 3. OBJECTIVES 1. To develop human resources at three levels, i.e., Technician, Supervisory and Executive levels for the development of the North Eastern Region in particular and the country in general; 2. To impart quality education with flexible multi-entry/exit systems to cater to the needs of the region; 3. To develop entrepreneurship base in the region; 4. To facilitate competency building in the North Eastern Region; 5. To strengthen R & D activities in the region; and 6. To play an advisory role for the overall development of the North Eastern region. 4. TEACHING DEPARTMENTS There is twelve degree awarding departments including a Center for Management Studies. The Institute offers bachelors degree programmes in six engineering disciplines and one in Forestry. The engineering disciplines are Agricultural Engineering, Civil Engineering, Computer Science and Engineering, Electrical Engineering, Electronics and Communication Engineering, and Mechanical Engineering. Besides the bachelors degree programmes, several post-graduate degree programmes leading to M.Tech, M.Sc, MBA and PhD are also offered by the Institute. 5. THE FACULTY Highly qualified and motivated faculty members from premier institutes of the country led by eminent Directors, have helped the Institute to grow into a vibrant seat of education catering to the needs of almost all sections of industries. The faculty

members are PhD / Post-Graduate holders from abroad, IITs, IISc, Central Universities, NITs and other leading Institutions of the country, and they have published research papers very widely in international / national journals of repute. Some of them have received awards for their contributions in research and academics. Many faculty members are engaged in individual research projects funded by CSIR, DST, DoE, UGC, AICTE, ICAR, DBT, DIT, TERI, IIRS, UNDP, ISRO, NBHM, MoEF, etc. A number of faculty members have visited abroad on prestigious fellowships such as BOYSCAST Fellowship, INSA Nehru Centenary Fellowship, SERC Fellowship, etc. 6. ACADEMIC STRUCTURE Technology stream (i.e., Engineering branches) at NERIST consists of three independent modules, viz., Base (Certificate), Diploma, and Degree modules. Each module is of two years duration (i.e., four Semesters). The first entry is after class 10th pass through NEE-I for admission in to Base Module. Lateral entry or lateral admission in to Diploma and Degree modules are permitted through NEE-II and NEE-III, respectively. The modular system of academic structure provides terminality corresponding to an occupational level, and at the same time, it allows entry to the next higher module leading finally to a degree in engineering and technology in six years time after class 10. The Base and Diploma levels emphasize more on practical aspects of engineering which go a long way in helping an individual to become an entrepreneur or face day-to-day problems of industry. The degree curriculum provides instructions in engineering and also emphasizes on management and entrepreneurship aspects making an individual more suited to the needs of todays industries. Forestry stream, on the other hand, has entry point after 10+2 with Physics, Chemistry and Biology through NEE-II for admission in to Degree Module leading to B.Sc degree in Forestry of four years duration (i.e., eight Semesters). 7. CENTRAL FACILITIES 7.1 ADVANCED CENTRAL COMPUTING FACILITY (ACCF) ACCF was established in 1996 with the objective of promoting research by faculty members

and encouraging advanced computer studies by students. 7.2 EDUCATIONAL TECHNOLOGY CELL The ET cell has been established as a project sponsored by the MHRD, Govt. of India with an objective to increase the effectiveness of teachinglearning process with the help of modern audio-visual equipment. Now, the cell consists of processing laboratory, seminar room, and board room that are well equipped with the state of art audio-visual equipment. These are used for Seminars, Conferences, Workshops and special lectures by faculty members and professionals from institutions and industries. The cell provides INTERNET facility through BSNL leased line connectivity of 16 Mbps and NKN connectivity to all the Departments, Offices, Hostels and the Schools in the campus. 7.3 INSTITUTE LIBRARY The Institute library, with a collection of over 53,000 text books and reference books in its Central library and over 35,000 books in its Book Bank, subscribes 145 national journals. It also subscribes 10 magazines and 12 national and regional dailies to provide a base for enhanced learning. Every student can get issued a full set of books from its Book Bank facility in each semester. The library is also a member of MHRD INDEST Consortium, Govt. of India that offers access to 9 international e-resources. Besides this, it also subscribes JSTOR e-resources for the users of the Institute. It possesses IS code on CD-ROM and other educational DVDs. Being an institutional member of Indian Liquid Crystal Society, Bangalore and Kaziranga Wild Life Society of Assam, it receives literature and information services from them. Users can also access their required information about books through OPAC (On-line Public Access Catalogue). 7.4 CAMPUS AMENITIES The Institute has a number of necessary infrastructural facilities such as Sub-Post Office, Branch of State Bank of India with core banking facility and ATM facility, Co-operative store, Institute Canteen, Nescafe Coffee Corner, Medical Health Unit, Kendriya Vidyalaya and Kinder Garten School. Another ATM facility has been extended by

the Axis bank. There are clubs for the faculty & officers, staff, and ladies. The Institute houses a BSNL telephone exchange in its campus, and has its own EPABX of 1200 lines. For stationery items, stores are provided in boys and girls hostel compounds. 7.5 STUDENTS ENROLMEMENT The Institute currently has the strength of about 1521 students. It is fully residential to accommodate the students in its eight Hostel blocks, which include four double storied, and four single storied Hostels. Amongst the four double storied Hostels, one is exclusively for girl students. Another girls hostel is under construction. 7.6 STUDENT GYMKHANA Students Gymkhana is the center of cocurricular activities for the students of the Institute. It provides the students with facilities for their all round development in the field of sports, cultural activities, hobbies and creativity. One multi-gym, one indoor badminton court, three basketball courts and a playground are under the Gymkhana. 7.7 TRAINING AND PLACEMENT Since its inception in 1991, the Training and Placement (T&P) Cell of the Institute provides training, placement and career development opportunities to its students, while simultaneously conducting IndustryInstitute interactions, Public relations and awareness programmes, Entrepreneurship Development Programmes and Student Career Counseling. Industrial Training programmes for the students being a compulsory requirement in partial fulfillment of the curriculum, the T&P Cell organizes such programmes for a period of 30-45 days at the end of the pre-final year during summer vacation. These trainings are conducted in reputed organizations such as IOC, OIL Ashok Leyland, ONGC, Gammon India Ltd, HPC, NIC, DRDO, NESAC, Damodar Valley Corporation, Power Grid Corporation of India Ltd., NBCC, L&T, CPWD, CIAE, ICAR, Mother Diary, RFRI, NEIST, Stock Holding Corporation of India, NEDFI, HCL, etc. The T&P Cell is also instrumental in counseling the final year students in securing jobs in consonance with their knowledge and skills by
3

organizing campus interviews and at the same time exploring various other avenues for their placements. It organizes workshops for the pre-final and final year students to provide them with sufficient exposure in areas pertaining to their recruitment and selection, and to facilitate their entry into leading and highly professional organizations. Some of the prominent organizations that conducted campus interviews in the Institute recently include Energy Infra Tech Limited, Star Cement, Wireless TT Info services Limited, WIPRO Technology, Tata Tele Services, Zaloni Inc, Soma Enterprises, PRADAN, SRIJAN, Met Life India Insurance, Vedanta Aluminum Ltd, NHPC, Indian Army, Indian Navy, etc. Apart from the companies stated above, the students of the Institute are also placed in other prestigious industries/organizations such as ABB (Asia Brown Boveri), APTECH Computer Education; AT&T, Bells Laboratory, Texas Instruments, Ericsson (USA), CDC, CDOT, CMC Ltd, Crompton Greaves, Fujitsu Network Switching of America Inc., HCL-HP Ltd., Hero Cycles, Hewlett Packard (Hong Kong) Ltd., Hindustan Cables, Hindustan Paper Corporation, Indian Railways (through IES), Modi Olivetti, Motorola (India) Electronics Private Ltd., National Informatics Centre, NIIT, Oil India Ltd., PCL, Philips India, Reliance Industries, Shipping Corporation of India, Siemens, Steel Authority of India Ltd., Tata Telecom, TCS, Videocon, Wipro Ltd, etc. 8. FEE STRUCTURE The current fee structure including the hostel seat rent per semester is given below:
Module Base Diploma Semester 1st Sem. 2nd Sem. onwards 1st Sem.(Vertical) 1st Sem.(Lateral) 2nd Sem. onwards 1st Sem.(Vertical) 1st Sem.(Lateral) 2nd Sem. onwards 1st Sem.(Vertical) 1st Sem.(Lateral) 2nd Sem. onwards GE/OBC 8870 SC/ST/PD 8675 2895 4440 4375 9450 9255 3035 4945 4880 10395 10200 3200 4900 4835 10395 10200 3200

Degree Degree Forestry

HOSTEL: Caution Money -

1000/-, Hostel Establishment charges: 500/-, Mess Advance 7000/- per semester. Besides the above, a sum of

3,000/- has to be deposited as caution money for Library book bank facility. 9. STIPEND / SCHOLARSHIP The SC/ST students of North Eastern states are generally provided with stipends by the concerned state governments at varying rates usually over 500/- per month. The North Eastern Council also provides scholarship to the students of the region for their study at Diploma and higher levels at rates, which vary between 700/- and 800/- per month. The continuance of stipend is subject to the following conditions: (i) His/her maintenance of discipline in the Institute is consistently good and he/she is regular in the classes. Unauthorized absence from the Institute/Hostel is treated as lapse of discipline. (ii) Satisfactory progress in his/her studies. 10. ACADEMIC WORK SCHEDULE Academic schedule of the Institute starts in July with first semester from July to December and second semester from January to May. The Institute remains open for five days in a week with Saturday and Sunday being off days. Regular classes are scheduled from 8 am to 5 pm with one hour flexible lunch break between 12 noon and 2 p.m. 11. ATTENDANCE All students are expected to attend classes regularly. Permission of the teacher or course coordinator concerned must be obtained for any unavoidable absence from the classes. A student should have a minimum of 75% attendance in the lecture / laboratory / workshop / drawing classes prescribed for each course failing which he/she will not be evaluated. In extreme situations, a 10%

relaxation in attendance is permitted on medical grounds. 12. EVALUATION PROCEDURE The evaluation procedure for the theory component of each course consists of three components: (i) teachers evaluation (class tests, assignments and quizzes, etc.), (ii) mid-semester examination of two hours and (iii) end-semester examination of three hours duration. The practical components of the courses are evaluated on the basis of the performance in the practical classes, practical tests and viva voce. 13. AWARDS The most outstanding students of Base (Certificate), Diploma, Degree Modules are awarded gold medals at the time of convocation. 14. ADMISSION PROCEDURE The NERIST Entrance Examination (NEE) is conducted at three Levels viz., NEE-I, NEE-II and NEE-III for admissions to Base Module, Diploma Module & Degree Module of Engineering & Technology branches of Technology stream; and to Degree Module of Forestry stream through NEE-II only. The entrance examination is conducted at various centers located in the North Eastern States of India viz., Arunachal Pradesh, Assam, Meghalaya, Manipur, Mizoram, Nagaland, Sikkim & Tripura. The selection of candidates is done in order of merit under various reservation categories. The notification for NEE-I, II & III is published in national newspapers and regional newspapers of the North Eastern region in the month of December every year. Information about the admission procedure can also be accessed by logging on to the Institutes website: http://www.nerist.ac.in

A C A D E M IC S T R U C T U R E
P h. D

P OST GR A D U A T E C O U R SE S
M. T ec h Sc/M B A /M. 2 Y e ars(4 Sem esters )

B. Sc (F orestry )

Pass o u t

B. T ec h D eg re e

D EGR E E M OD U L E
4 Y ea rs(8 Sem este rs )

B ridge C ourses
1 Y ea r(2 Se m e sters )

D E GR E E M OD U LE
2 Y e ars(4 Sem esters ) T h eo ry6 0%; Practice4 0% : :

T hrough N E E -II
E n try afte r C lass w ith Ph y sics 1 0+2 , C h em istry a n d B io lo g yB) (PC

T hrough N E E -III
E n try afte r D ip lo m a in A E S/E C/E E/M E /C E/C

V er tic a l M o bility Y

F O R E S T R Y ST R E A M

T hrough N E E -II
E n try afte r C la1 0+2 w ith Ph y sicC h e m istry an d ss , s M a th e m a tic s M) (PC

Pass o u t

N E R IST D ip lo m a h o ld ers

2 Y e ars(4 Sem esters ) E n try a fter C lass V o c atio n/IT I/N E R IST C ertific ate in 1 0+2 al T h eo ry5 5%; Practice4 5% : : Farm E q u ip m e(FE)/Fo o d Pro ce ssin g nt (FP)/C o n stru ctio n T ech n o lo g(C T)/E le c tro n ics T e ch n o lo g y o r E lectro n ics y M ain ten a n ce T/E M)/E lectrica l T ec h n o lo g y o r E le ctrical (E V er tic a l M ain te n an c e T/E M)/M ec h an ica l C raftsm a n(M ip (E sh C )/ M o bility A u to m o b ile T ech n o lo gT)/R e frig e ra tio& A ir (A y n X C o n d itio n in g A C (R )

OR

D IP L O M A M O D U L E

Pass o u t N O T EQ u alify in g p e rce n tag e o f to tal se a ts a c co rd in g to : : X V e rtic al m o b ility b a sed o n C G 0/5.0 0 : 3.0 PA Y V e rtic al m o b ility b a sed o5/5.0 0 : 3.2 n

N E R IST C ertifica te h o ld ers

B A SE M O D U L E

2 Y e ars(4 Sem esters ) T h eo ry3 5%; Practice6 5% : :

T hrough N E E -I
E n try after C la1 0th ss

T E C H N O L OG Y ST R E A M

15. NERIST ENTRANCE EXAMINATION

The NERIST Entrance Examination (NEE) is conducted for admission in different modules of study in the Institute. There are three different examinations known as NEE-I, NEE-II and NEE-III that are being conducted every year to admit students in these modules viz., Base (Certificate), Diploma and Degree modules. The entrance examination is held at various centres located in the eight North Eastern States of India. 15.1 NEE-I: It will have one question paper of 150 marks consisting of three sections and of three hours duration. All questions will be of objective type with multiple-choice answers. For every wrong answer to a question, 25% (th) of the marks carried by that question will be deducted. There shall be no deduction for un-attempted question. Scheme for NEE-I Pattern of question papers for applicants having Science and Mathematics in their 10th / matriculation qualifying examination and seeking admission to Base Module in Engineering / Technology (Technology stream): Applicants shall have to attempt all the questions in all the sections. The sections and subject-wise distributions of marks are given below: Section-A (Physics): 35 marks. 35 questions of 1-mark each. Section-B (Chemistry): 35 marks. 35 questions of 1-mark each. Section-C (Mathematics): 80 marks. 30 questions of 1-mark each, 25questions of 2-marks each. ELIGIBILITY Maximum Age Limit: 19 years for GE, 24 years

such cases, selected candidates must produce the original pass certificates and mark-sheets at the time of their admission. Otherwise, their admission shall stand automatically cancelled. 15.2 NEE-II: It will have one question paper of 150 marks and of three hours duration. All questions will be of objective type with multiplechoice answers. For every wrong answer to a question, 25% (th) of the marks carried by that question will be deducted. There shall be no deduction for un-attempted question. Scheme for NEE-II There shall be two different modes of question papers: (i) NEE-II (PCMB) (for both Technology stream and Forestry stream), (ii) NEE-II (Vocational) (for Technology stream only). (i) NEE-II (PCMB): Pattern of question papers for applicants having Physics, Chemistry and Mathematics (PCM) or Physics, Chemistry and Biology (PCB) in their 10+2 PCM/PCB qualifying examination and seeking admission to Diploma Module in Engineering/Technology (Technology stream) or Degree Module in Forestry (Forestry stream), respectively: The question paper shall consist of four sections viz., Sections A, B, C and D of 150 marks. Applicants seeking admission to Technology stream shall have to attempt sections A, B and C; and those seeking admission to Forestry stream shall have to attempt section A, B and D. Applicants should not attempt all the four sections. They should adhere to the choice of their option (either A,B,C or A,B,D) as per their choice of stream mentioned in their applications. The sections and subject-wise distributions of marks are given below: Section-A (Physics): 45 marks. 25 questions of 1-mark each 10 questions of 2-marks each Section-B (Chemistry): 45marks. 25 questions of 1-mark each 10 questions of 2-marks each Section-C (Mathematics): 60 marks. 30 questions of 1-mark each 15 questions of 2-marks each Section-D (Biology): 60 marks. 30 questions of 1-mark each

for ST/SC/PD and 22 years for OBC and female applicants as on 1st August, 2012.
Academic Qualification For NEE-I: Applicants should have passed Class 10 / Matriculation examination or an equivalent examination with Science and Mathematics. They should have passed in both Science and Mathematics subjects. Applicants whose results are awaited may also appear in the NERIST Entrance Examination. In

15 questions of 2-marks each

(ii)

NEE-II (Vocational): Pattern of question papers for applicants having vocational courses in their qualifying examinations (i.e., 10+2 Vocational / ITI / NERIST Certificate) and seeking admission to Diploma Module in Engineering/Technology (Technology stream): Question paper for each trade/branch shall consist of four sections, viz., Sections A, B, C and D; and one shall have to attempt all the questions in all the four sections. Thus, NEE-II (Vocational) question papers shall be Trade / Branch-wise containing all the four sections in each set. Sections A, B & C shall be common for all the Trades / Branches, and sectionD shall pertain to the relevant Trade / Branch subject of the applicant. The sections and subject-wise distributions of marks are given below: Section-A (Physics): 25 marks. 25 questions of 1-mark each Section-B (Chemistry): 25 marks. 25 questions of 1-mark each Section-C (Mathematics): 30 marks. 30 questions of 1-mark each Section-D (Vocational Subject): 70marks. 30 questions of 1-mark each 20 questions of 2-marks each Important note: Section-D, Vocational Subject, consists of Syllabus of Common Engineering Sciences (10 questions of 1-mark each & 5 questions of 2-marks each) and that of one Trade / Branch subject (20 questions of 1-mark each & 15 questions of 2-marks each) as given below from Sl. No. 1 to 8, which should be appropriate to the academic qualification of an applicant. Trades / Branches: 1. AE(FE = Farm Equipment), 2. AE(FP = Food Processing), 3. CE (CT = Construction Technology, i.e., Draftsmanship / Surveyor), 4. ECE (ET or EM = Electronics Technology or Electronics Maintenance), 5. EE (ET or EM = Electrical Technology or Electrical Maintenance), 6. ME (MC = Mechanical Craftsmanship) 7. ME (AT = Automobile Technology) 8. ME (RAC = Refrigeration & Air Conditioning).

ELIGIBILITY Maximum Age Limit: 23 years for GE, 28 years for ST/SC/PD and 26 years for OBC and female applicants as on 1st August , 2012. Academic Qualifications for NEE-II: (i) NEE-II (PCMB): For Technology StreamApplicants with 10+2 PCM/PCMB should have passed with Physics, Chemistry and Mathematics (PCM), separately. For Forestry stream- Applicants with 10+2 PCB/PCMB should have passed in Physics, Chemistry and Biology (PCB), separately. (ii) NEE-II (Vocational) For Technology Stream only: Applicants with 10+2 Vocational / ITI / NERIST Certificate in any one of the branches / trades, viz., Farm Equipment (FE) / Food Processing (FP) / Construction Technology i.e. Draftsmanship / Surveyor (CT) / Electronics Technology or Electronics Maintenance (ET/EM) / Electrical Technology or Electrical Maintenance (ET/EM) / Mechanical Craftsmanship (MC) / Automobile Technology (AT) and Refrigeration & Air Conditioning(R&AC) are eligible. Applicants who are appearing in the above mentioned qualifying examination and whose results are awaited may also appear in the Entrance Examination. In such cases, selected candidates must produce the original pass certificates and mark-sheets at the time of their admission. Otherwise, their admission shall stand automatically cancelled. Candidates, who are selected under NEE-II Technology stream i.e., 10+2PCM and NEE-II Vocational, shall have the choice of branch during counseling out of the six branches / disciplines, viz., AE, CE, CSE, EE, ECE and ME on the basis of their merit and reservation category. 15.3. NEE-III: There shall be only one question paper of 150 marks consisting of four sections of three hours duration. All questions will be objective type with multiple-choice answers. For every wrong answer to a question, 25% (th) of the marks carried by that question will be deducted. There shall be no deduction for un-attempted question. Scheme for NEE-III Question paper for each Branch/Discipline shall consist of four sections, viz., Sections A, B, C and

D; and one shall have to attempt all the questions in all the four sections. The sections and subject-wise distributions of marks are given below: Section-A (Physics): 25 marks. 25 questions of 1-mark each Section-B (Chemistry): 25 marks. 25 questions of 1-mark each Section-C (Mathematics): 30 marks. 30 questions of 1-mark each Section-D (Branch subject): 70marks. 30 questions of 1-mark each 20 questions of 2-marks each Sections A, B & C shall be common for all the Branches/Disciplines, and sectionD shall pertain to the relevant Branches/Disciplines (viz., AE or CE or CSE or ECE or EE or ME) of the applicants. Thus, NEE-III question papers shall be disciplinewise containing all the four sections in each set. ELIGIBILITY Maximum Age Limit: 40 years for GE, 45 years for ST/SC/PD and 43 years for OBC and female applicants as on 1st August, 2012. Academic Qualifications for NEE-III: Applicants must have passed the 3-year Diploma course from any Government recognized polytechnic / institution in the respective or allied discipline/ branch as per the Appendix-III given in this Information Brochure with 60% marks considering aggregate marks of all the three years together or NERIST Diploma Module. Those applicants who dont possess their qualifications as per the disciplines/branches mentioned in AppendixIII are not eligible for admission. Admission to Degree Module in engineering is available in the following disciplines/branches:(i) Agricultural Engineering (AE) (ii) Civil Engineering (CE) (iii) Computer Science & Engineering (CSE) (iv) Electrical Engineering (EE) (v) Electronics & Communication Engineering (ECE) (vi) Mechanical Engineering (ME). Applicants who are appearing in their Final examination of the three-year diploma course may also appear in NEE-III. In such cases, selected candidates must produce the original pass certificates and mark-sheets at the time of

counseling/admission, otherwise their admission shall stand automatically cancelled. Note: In case, an applicant is found ineligible at a later date (i.e., even after his/her admission is complete), his/her admission will be cancelled. Hence, all admissions shall be subject to verification of facts from the original certificates/documents of the applicants.

16. APPLICATION FORM

16.1 APPLICATION FEE The fee for the Information Brochure-cumOMR Application form for General & OBC category is 750/- and that for ST, SC, & PD is 400/-. Note: (i) Serial number (with bar code) on each OMR Application Form is the correct serial number for reference/correspondence. (ii) Applicants must ensure that they have paid the requisite fee and they are filling up the correct OMR Application Form according to their category failing which their applications shall summarily be cancelled without further notice. (iii) Please refer to the Specimen copy, which is supplied along with OMR Application Form as Hints in Filling up the Application Form. 16.2 INSTRUCTIONS FOR FILLING UP OMR APPLICATION FORM: Not to do: *Dont staple any paper, document(s), acknowledgement card or own photograph along with the filled up OMR Application or the Envelope containing the Application. *Dont mutilate or temper with the OMR Application Form failing which the application shall summarily be rejected. *Dont send any mark sheet, document or testimonial certificate(s) along with the Application. However, if selected, a candidate must produce all his/her mark-sheets, certificates, testimonials, etc., in original, and must submit photocopies of the same duly attested by a gazette officer at the time of counseling / admission failing which his/her candidature shall summarily be rejected.

*Dont send incomplete Application or Application with incorrect information(s). Such applications shall summarily be rejected, and no request in this connection shall be entertained at any level. To do: *Please follow the instructions to facilitate computerized processing of applications. * HB Pencil should be used to completely darken () the Bubbles in the OMR Application form to provide all the required information therein from Sl.No.1 to 9 and 13 to 19. * Black Ball Point Pen should be used, (dont use Blue ball point pen or any other color ball point pen because of the difficulty in getting computer scanning impressions during processing of such OMR Applications), to write the required information therein at Sl.Nos. 1, 6 to 10, 12, 13, 14 and 20 in the blocks / spaces in capital letters or in numbers (as the case may be). 16.2.1 Applicants personal details: Sl.Nos. 1 to 7, 10 to 14 and 20 should be completed as per the above said instructions that is, darkening of appropriate bubbles / writing in the spaces / pasting of recent color photograph / signature in running hand. While darkening appropriate bubbles / writing in the spaces under Sl.Nos.1 and 13, one alphabet letter-space should be left in between first name and surname(s) to identify full name of the applicant correctly (see specimen copy supplied along with the OMR Application Form). All applicants should invariably give their Mobile Number at Sl.No.7 to make contact with them in case of exigency or emergency situation(s). For proper identification in the examination hall / during counseling or admission, applicants should paste their recent passport size (4.5cm x 3.5cm) color photograph at Sl. No.11, and put their signatures in running hand with black ball point pen at Sl.No.12. At Sl.No.20, an applicant should sign the declaration which should also be countersigned by his/her parent / guardian in running hand with individuals name and date.

16.2.2 APPLICANTS EXAMINATION RELATED DETAILS: (i) Exam. Centre Code (at Sl.No.8) & Reservation Code (at Sl.No.9) (See section 16.2.3 & 16.2.4 for details), (ii) Choice of NEE (appearing for) at Sl.No.15, (iii) Academic qualification at Sl.No.17, (iv) Choice of Trade/Branch subject for NEE-II (Vocational) at Sl.No.18, (v) Choice of Discipline/Branch subject for NEE-III at Sl.No.19: An Applicant should darken only one bubble against his/her choice of examination - either NEE-I or NEE-II or NEE-III under Sl.No.15 depending upon his/her eligibility for appearing in such an examination. The eligibility criteria is given at Sl.No.17 for seeking admission in a Module (Sl.No.16); and the applicant must darken the appropriate bubble (i.e., qualifying examination pass / appearing) against his/her choice of examination, viz., NEE-I / NEE-II / NEE-III. An applicant, however, can submit separate application(s) for each examination, if he/she so desires based upon his/her eligibility to appear for such examination(s). NEE-I: Applicants, who have given their choice for NEE-I, must darken the appropriate bubble against Class10 / Matriculation pass or appearing at Sl. No.17. NEE-II: For NEEII (PCMB), there are two streams - Technology stream and Forestry stream based upon 10+2 PCM (Physics, chemistry and Mathematics) and 10+2 PCB (Physics, Chemistry and Biology), respectively. An applicant can opt for only one of these two streams based upon his/her eligibility at Sl.No.17 by darkening the appropriate bubble against PCM or PCB pass or appearing. For NEEII (Vocational), there is only Technology stream available. Applicants, who are having their academic qualifications in 10+2 Vocational / I.T.I / NERIST Base Module Certificate in Engineering & Technology and willing to appear for NEE-II, must darken the bubble against their academic qualifications at Sl. No.17 pass or appearing, and they must exercise their choice of trade/branch subject

under Sl.No.18 by darkening the appropriate bubble (only one). Vocational Subjects for NEE-II (Vocational): Following are the trade / branch subjects for NEE-II (Vocational): 1. AE (FE = Farm Equipment), 2. AE (FP = Food Processing), 3. CE (CT = Construction Technology, i.e., Draftsmanship / Surveyor), 4. ECE (ET or EM = Electronics Technology or Electronics Maintenance), 5. EE (ET or EM = Electrical Technology or Electrical Maintenance), 6. ME (MC = Mechanical Craftsmanship), 7. ME (AT = Automobile Technology), 8. ME (RAC = Refrigeration & Air Conditioning). NEEIII: Applicants, who are 3-year Diploma holders in Engineering and Technology (see Appendix-III for eligibility criteria), should darken the appropriate bubble at Sl. No.17 pass or appearing, and should give their choice of branch/discipline subject (only one), viz., AE, CE, CSE, ECE, EE and ME, by darkening the appropriate bubble at Sl.No.19. 16.2.3 EXAMINATION CENTRE CODE:

01 02 03 04 05 06 07 08 09 10 11

Agartala Aizawl Dibrugarh Gangtok Guwahati Imphal Itanagar Kohima North Lakhimpur Shillong Silchar

The NERIST Entrance Examination (NEE) will be conducted at eleven centers in the eight North Eastern States only. The names of the centers are given in Table-1. An applicant should choose an appropriate Examination Centre code of two a digit-number (say XX) from the Table-1 as to where he/she desires to appear for the Entrance examination-2012, and should darken the bubble at Sl.No.8 in the OMR Application Form. The choice of Examination Centre exercised by an applicant is maintained as such. However, in case the number of applicants in that Examination centre is less than a certain number then the applicants may be accommodated in a nearby Examination centre.
Table-1. Examination Centre Codes: Examination Centre Name of Examination Code (XX) Centre

16.2.4 RESERVATION OF SEATS Reservation of seats (see Table-2: Reservation of seats with its codes) is put under three different categories. A candidate seeking / claiming admission against a seat under any of the categories shall have to produce relevant certificate(s) at the time of counseling / admission. The categories are as under: (i) Statequota: For candidates who belong to any of the Eight North Eastern States; (ii) All India-quota: For candidates who belong to any of the States of India; and (iii) PD-quota: For candidates with 40 to 75% Physical locomotor Disability (PD) belonging to any of the States of India. The distribution of seats is such that out of the total number of seats in each of the modules for direct admissions, 80% of seats are reserved for candidates of the eight North Eastern States (10% for each state) as state-quota. Besides this, 7% of the total seats are also filled up with Permanent Residence Certificate (PRC) holders of these eight North Eastern States on merit basis. Only 10% of the total seats are filled up with candidates under All India-quota; and 3% of the total seats are reserved for Physical locomotor Disabled (PD) persons under PD-quota. Reservation Codes (Table-2): Admissions in Technology stream as well as in Forestry stream are taken on the basis of total seats allotted to the three different categories. So, an applicant must choose an appropriate reservation code based upon his/her eligibility from amongst the reservation codes given in Table-2 (Reservation of seats with its codes) by darkening the appropriate bubble at Sl. No.9 of the OMR Application Form.

10

Please see Table-2 for Reservation of seats with its codes. Each reservation code is a 4-digit number, say ABXX. To read it from left to right, the first digit A ranges from 1 to 9; and the numbers 1 to 8 denote State-quota under the eight North Eastern States in alphabetic order, whereas number 9 denotes All India & PD-quotas together. The second digit B has got two numbers, 1 and 2. Number 1 is applicable to those applicants who have got Permanent Residential Certificate (PRC) of any of the eight North Eastern States, and number 2 is applicable to Non-PRC holder applicants of these States who have got other relevant certificate(s) to claim for a seat under State-quota of the eight North Eastern States. Besides this, number2 is also applicable to all those applicants who belong to the All India or PD category. The digits XX merely denote Table-2. Reservation of Seats with its Codes:
State Reservation Code (ABXX) 1109 1211 Arunachal Pradesh 1212 1213 2101 2102 2103 2104 2105 2210 3101 3102 3103 3109 4101 4106 4107 4108

serial numbers in all the codes of the three categories of reservations.

For availing benefit of reservation of a seat, please see section 16.2.4 - Reservation of Seats, and Table-2 for choice of an appropriate reservation code. Reservation of seats under All India & PDquotas is open to all applicants (Indian nationals), if they desire so, for a seat under such categories.

Important Note: Any deviation in documentary proof for the reservation code mentioned / chosen by an Applicant in his/her Application shall lead to summarily rejection of his/her candidature. Proof of eligibility against a reservation code, other than All India categories applicable for general candidates, must be produced at the time of counseling/admission.

Description of Reservation of seats ST, PRC holders of Arunachal Pradesh Wards of State Govt. Employee or State under taking employees of Arunachal Pradesh, Non-PRC holders. Wards of Central Govt. or Central Govt. undertaking employees serving in Arunachal Pradesh, Non-PRC holders. Other candidates (Non-PRC holders) residing in Arunachal Pradesh for not less than 3 years and not covered in any of the above reservation categories. General, PRC holders of Assam. OBC, PRC holders of Assam. SC, PRC holders of Assam. ST, PRC holders from plain area of Assam. ST, PRC holders from hill area of Assam. Wards of Central Govt. / State Govt. or undertaking employees serving in Assam , Non-PRC holders. General, PRC holders of Manipur. OBC, PRC holders of Manipur SC, PRC holders of Manipur. ST, PRC holders of Manipur. General, PRC holders of Meghalaya. Khasi / Jaintia, PRC holders from Meghalaya. Garo, PRC holders from Meghalaya. Other ST, PRC holders from Meghalaya.

Assam

Manipur

Meghalaya

11

Mizoram

5101 5109 5201 6101 6109 6201 7101 7102 7103

General, PRC holders of Mizoram. ST, PRC holders of Mizoram. GEC & Others (Non-PRC holders of Mizoram). General, PRC holders of Nagaland. ST, PRC holders of Nagaland. Others, Non-PRC holders of Nagaland. Merit, (Local with Sikkim Subject Certificate/Certificate of Identification) OBC, (Local with Sikkim Subject Certificate/Certificate of Identification) SC, (Local with Sikkim Subject Certificate/Certificate of Identification) ST, (Excluding Bhutia & Lepcha) (Local with Sikkim Subject Certificate/Certificate of Identification) Most backward classes (Local with Sikkim Subject Certificate/Certificate of Identification) Bhutia & Lepcha , (Local with Sikkim Subject Certificate/Certificate of Identification) Others (children of business community and State Govt. employees of Sikkim who do not fall under the above categories of Sikkim). General, PRC holders of Tripura. SC, PRC holders of Tripura. ST, PRC holders of Tripura. General, Candidates from any of the States of India. OBC, Candidates from any of the States of India. SC, Candidates from any of the States of India. ST, Candidates from any of the States of India. Physically Disabled (PD) candidates, with 40 to 75% locomotor disability only, from any of the States of India.

Nagaland

Sikkim

7109 7114 7115 7216 8101 8103 8109 9201 9202 9203 9209 9229

Tripura

All India

Physical locomotor Disability (PD)

16.2.5 DECLARATION BY THE APPLICANT: All applicants should have to give their declaration by signing with date the statement mentioned in the OMR Application Form at Sl. No.20, and the same should be countersigned with date by applicants Parent/Legal Guardian. Otherwise, the Application will be treated as incomplete and shall summarily be rejected. 16.2.6 POSTAL ADDRESS FOR COMMUNICATION: An applicant should write (in capital letters) his/her complete postal communication address (giving details such as Flat No./Street No./Lane no., etc.) including Pin Code and Mobile number/Phone number (with STD code) and E-mail ID within the

space provided in the OMR Application Form at Sl. No.10 using Black ball point pen only. Important note: (i) Folding of the OMR Application form must be made at the markers as shown in the Form itself, such as (. Fold Here). (ii) Applicants should retain the information brochure and a photocopy of the filled up OMR Application with them for future reference. (iii) Serial number (with bar code) on each OMR Application Form is the correct serial number for future correspondence till the counseling/admission is over. In case, there is any mismatching of this number with those written/printed on the Application-Envelope and Acknowledge card, the

12

concerned applicant(s) should do the necessary correction. 17. OMR APPLICATION-ENVELOPE: Every applicant must match the OMR Application serial number with those on the Application-Envelope and Acknowledgement card. An Applicant should put tick mark in the boxes of Check-list to see whether he/she has filled up the Application properly. He/she should write his/her complete postal communication address along with mobile/ phone number (with STD code) and e-mail ID (if any) on the Application-Envelope. He/she should put a tick mark by the side of choice of examination (NEE-I or NEE-II or NEE-III) and should write the Examination Centre Code or Name of the Examination Centre in the space provided there in. 18. ACKNOWLEDGEMENT CARD An Applicant should write his/her complete postal communication address in capital letters on the Acknowledgement Card and should affix a postage stamp of 6/- on it. Further, he/she should write his/her name on the left-hand side of the postal address, and should also check the Serial number on the Acknowledgement card with that of on the OMR Application. The filled up Acknowledgement card be kept / put inside the Application-Envelope along with the Filled up OMR Application. The purpose of acknowledgment card is to intimate the Applicants about receipt of their applications by the Institute. The Application number mentioned therein should be used for further correspondence, if any. Note: Please remember that the Acknowledgement Card, any paper, document(s) or own photograph must not be stapled along with the OMR Application or the Envelope containing the Application. 19. HOW TO SEND THE COMPLETED / FILLED UP OMR APPLICATION: The Completed Application and the Acknowledgement card bearing the applicants address on it and postage stamp of 6/- pasted on it should be kept in the Application-Envelope in such

a way that the OMR Application Number must be seen through the window of the Envelope. The same should then be sent by Registered Post / Speed Post / Courier Services to: The Member Secretary, NERIST Entrance Examination (NEE)-2012, North Eastern Regional Institute of Science and Technology, P.O: Nirjuli, Dist. Papumpare, Arunachal Pradesh, Pin - 791109.

Important Note: Please remember that Hand delivery of the Completed Application is not accepted.
20. LAST DATE FOR RECEIPT OF APPLICATION: Last date for receipt of completed applications at NERIST is March 5th, 2012 (Monday). Delay in receiving a blank OMR Application Form by an applicant shall not be considered as a valid reason for late submission of his/her Application. The Institute shall not be responsible for any postal delay / irregularity. Applications received after the due date shall not be considered. 21. Proof of Submission of Application: a) The Institute will send the acknowledgment card (bearing the application number / reference number) back to the applicants for future reference / correspondence, if required. b) No claim of submission of Completed Application will be entertained unless it is supported by the acknowledgement card sent by the Institute. c) No correspondence with regard to the Application, Eligibility, Admit Card, etc., shall be entertained unless the reference number / application number given on the Acknowledgment card is quoted. 22. ISSUE OF ADMIT CARD: Admit cards will be dispatched to eligible candidates in the last week of March or 1st week of April by Speed Post. However, one can see his/her Roll No. and Exam. Centre in our Institute website. 23. EXAMINATION SCHEDULE NEE-II & NEEIII : April 28th , 2012 (Saturday).
13

NEE-I :

April 29th , 2012 (Sunday).

Note: On the day of the Examination, candidates must bring their Admit Cards, HB Pencils, good quality erasers, Black ball point pens, etc., to the Examination Hall. Calculator/Log tables are not allowed for NEE-I. However, these are allowed for NEE-II, NEE-II (Vocational) & NEE-III. In case of non-receipt of Admit Card, a candidate must bring the photocopy of his/her Application (which every applicant is advised hereby to keep with him/her), Acknowledgement Card (if received) and two color photographs of his/her own. Secondly, to answer a question in the OMR Answer Sheet, a candidate needs to darken the appropriate bubble (only one) using HB Pencil for his/her answer against a Question number. For example, Ques. No. 1: The chemical formula of common salt is: (A) NaCl (B) Na 2SO4 (C) Na3PO4 (D) NaI. D A B C Answer for Question no.1: The option should be darkened like this as shown above if the choice of answer is (A). 24. Declaration of NEE result The NEE-2012 results shall be declared on 14th May 2012 (tentatively) or latest by first week of June, 2012. However, an early declaration of results can be known through the NERIST web site: http: // www.nerist.ac.in and / or Directorates of Higher & Technical Education of the North Eastern States or through local newspapers of the North Eastern States. 25. Call for Counselling / Admission Counseling/admission shall start, tentatively, from 9th July 2012 or sometime in the 2nd or 3rd week of July 2012. Selected and waitlisted candidates shall be issued intimation letters in the 1st or 2nd week of June 2012 for counseling / admission. At that time, the candidates shall have to produce all the relevant original certificates/documents. They shall have to submit attested copies of all the relevant certificates/documents along with the two original anti-ragging affidavits at the time of counseling/admission.

25. Certificates for Reservation of Seats: (a) An Applicant with Physical-loco motor Disability (PD) should produce a certificate in prescribed format from a Medical Board (attached to Special Employment Exchange/Vocational Rehabilitation Centre for physically challenged persons) or a Medical Board at District level, in which an orthopedic Surgeon/Specialist in Physical Medicine and Rehabilitation should be a member, at the time of counseling/admission. If he/she fails to produce the original certificate for claiming PDquota at the time of counseling/admission, his/her candidature shall summarily be rejected. (b) Permanent Residential Certificate (PRC) holders should produce the original PRC issued by the Deputy Commissioner or any other duly authorized Revenue Officer of the concerned District of the State for verification at the time of counseling/admission. The certificate should bear the office seal, signature with date, name, and seal of the issuing officer. (c) ST/SC/OBC certificate should be issued by the competent authority of the concerned District of the State in the prescribed format. The same should be presented in original for verification at the time of counseling/admission by those applicants who have applied for seats under such an option. (d) Other (Non-PRC) certificate: If an applicant seeks a seat under State-quota of any of the eight North Eastern States for being a Non-PRC holder, he/she should produce the relevant certificate in original issued by the competent authority of the concerned District of the State to produce the same at the time of counseling/admission. (e) Govt. Employee Certificate (GEC) issued by the Employer of the applicants parent/legal guardian should be presented in original for verification at the time of counseling/admission by those applicants who have applied for seats under this option. Note: Providing incomplete / incorrect information will result in cancellation of the applicants candidature. In case of any dispute, the decision of the Director, NERIST and the Chairman, NEE, shall be final, and no claim or request in this regard shall be entertained at any stage. 26. Anti-Ragging Affidavits Mandatory for all students (see Appendices-I & II)

14

Ragging is banned in the Institute. And one, who is found indulged in ragging directly or indirectly during the entire period of his/her study, will be punished. The punishment may include actions under penal laws, expulsion from the Institute, and suspension from the Institute or fine with a public apology. It may also take the shape of (i) withholding his/her results, (ii) withholding his/her scholarships or other benefits, (iii) suspension or expulsion from hostel or mess or collective punishment, and/or (iv) mentioning the act of indulgence in ragging in his/her Conduct certificates, etc. Note: Two Numbers of Affidavits, each on 10/Non-Judicial Stamp Paper duly signed by First Class Magistrate / Notary must be submitted by all the candidates at the time of Counseling / Admission. Formats for the Affidavits are given at Appendices I & II.

S Y L L A B I : NEE-I
Syllabi for Class 10 / Matriculation certificate holder applicants seeking admission in Base Module in Engineering & Technology). Full Marks: 150 SECTIONS: Section-A Physics Section-B Chemistry Section-C Mathematics Time: 3 Hours. 35 Marks. 35 Marks. 80 Marks.

Section-A
PHYSICS 35 Marks. Measurement in Science and Technology: Measurements and measurement systems; Historical developments in measurement science; The modern measurement system; The international system of units (SI); Maintenance of standards of measurements; Multiples and fractions; Indian national standards of measurements. Structure of Atom: Fundamental Experiments and discharge tube and the discovery of the electron; Canal rays or positive rays; X-rays and radioactivity; Atomic nucleus; Structure of atom; Discovery of the neutron; Atomic Number and atomic mass; isotopes.

Motion: Motion of living and non-living objects; Distance and displacement; Uniform and Non Uniform motion, Velocity; Non uniform motion and acceleration; Graphs and their uses; Uniform circular motion. Gravitation: Universal law of gravitation; Motion of particles under gravity; Motion of a projectile, Mass and weight; Geotropism. Work, Energy and Power: Work, work done when the force is not along the direction of motion; Energy; Power, Transformation of energy, Conservation of energy. Heat: Heat and temperature; Thermal equilibrium; Mercury thermometer, Heat as a form of energy, Effects of Heat; Changes of state. Wave motion and sound : Simple Pendulum, Wave motion; Transverse and longitudinal waves; Graphical representation of simple harmonic waves characteristic of harmonic waves; Relation between wave velocity, frequency and wave length for a periodic ; Nature and propagation of sound; speed of sound; Range of hearing in humans, Reflection of sound, practical applications of reflected sound; Echoes; Sonar and Application of Ultrasound. Light reflection and refraction: Nature of light; reflection of light by mirrors-by plane mirror, spherical mirrors, new Cartesian sign convention for reflection by spherical mirrors and derivation of mirror formula, magnification; Refraction of lightthe refractive Index, reflection through a rectangular glass slab, refraction by spherical lenses, sign convention with spherical lenses - Lens formula, power of a lens, total internal reflection, some optical phenomena in nature; dispersion of white light by a glass prism; color of objectsprimary colours of light and pigments. Optical Instruments: The human eye; defects of vision and their correction; microscope and the astronomical telescope. Electricity, its heating and chemical effects: Electric charges and its properties; conductors and Insulators; electric current-charges in motion; electric potential and potential difference; circuit diagram; Ohms law-resistance, resistivity, resistors in series and in parallel; heating effect of electric current-electric energy and electric power. Magnetic effects of electric current: Magnetic field and field lines; magnetic field around a current carrying straight conductor; force on a currentcarrying conductor in a magnetic field; electric

15

motors; electromagnetic induction; electric generators; domestic electric circuits; the electric fuse-A safety device. Nuclear Fission and Fusion: Nuclear reactions; Nuclear fission; Fission products; Energy released in fission reactions; Chain reaction; Theory of Nuclear fission; Nuclear reactors; Nuclear hazards and safety measures. The Universe: The solar system- the sun, the terrestrial planets, the Jovian planets, asteroids, meteorites and comets. The Structure and evolution of the earth; The stars and constellations; Milky way galaxy and other galaxies; Space explorationSpace Programme in India.

Reversible and Irreversible reactions, Reversible reaction and Chemical equilibrium, Law of chemical equilibrium, chemical formula and equations, Atomic and Molecular masses, Mole concept, gram atomic mass and gram molecular mass, Determination of formula of unknown compounds, Balancing of chemical reactions. Energetics: Bond energy, Energy involved in a reaction. Photo-chemical reactions and generation of free radicals. Electrolysis of water and NaC1, Electrochemical cells (Galvanic cell) with reference to dry cells and storage cells. Sun and Nuclear energy, Sun and its source of energy (Nuclear fusion), Nuclear fission, Chain reaction, Nuclear reactors, Nuclear hazards, simple nuclear reactions. Metals: Physical and chemical properties, Reaction with O2, dilute acid, C12. Elementary metallurgy of Cu, Fe, Al, and uses of the metals. Washing soda, Baking soda, lime, preparation of Bleaching Powder, Plaster of Paris, Cement, Glass, Steel. Some common alloys of copper, iron and aluminum. Corrosion of metals. Non-Metals: Physical and chemical properties, reactions with O2, acid, C12, H2, Preparation and properties of Si, P, S, ammonia, hydrogen and sulphuric acid. Carbon and its compounds: Allotropes of carbon. Hydrocarbon: Alkanes, Isomerism in alkanes. Petroleum; Preparation and properties of Methanol, Ethanol, Methanal, Propanone, General properties of organic acids and esters, Synthetic polymers: addition polymers (PE, PP, PVC, Teflon) and condensation polymers ( nylons and polyesters); Rubber and its vulcanization; Soaps, detergents; Cleansing action of soaps and detergents. Bio-mass as fuel: Fossil fuel, Coal, Petroleum, Natural gas; Classification of Fuels. Calorific value of fuels, Ignition temperature, Combustion of fuels, Characteristics of an ideal fuel. Environmental Pollution: Types of pollution and pollutants, Acid rain, Green House Effect, Eutrophication and Soil erosion. Conservation and protection of environment.

SECTION-B
CHEMISTRY 35 Marks Matter Around Us: Physical nature of matter, states of matter; General concept about mixture, solution, colloidal solution, suspension, distillation, condensation, evaporation, sublimation and fusion; Effect of pressure and temperature on states of matter. Atomic Structure: Daltons atomic theory, elements, compounds, cathode ray, X-ray, Thomsons model of an atom, Rutherfords model of atomic structure. Bohrs model of atomic structure. Electronic configuration (in terms of Shells only) of elements up to Atomic No. 20; Atomic number, Mass number, Isotopes and Isobars; Radioactivity. Classification of Elements: Mendeleev and Modern periodic table, Periodic trend of metallic and nonmetallic character, atomic size, nature of bonding, oxides and related chemical properties, prediction of properties of an atom. Chemical Bonding: Octet rule or configuration as criteria of stability. and valency. Ionic bonds, covalent simple cases), shape of Molecules of CH4, CC14, C2H4, SF6, PCI5, CO2. inert gas Ion, atom bonds (in H 2O, NH3,

Chemical reactions and Some basic concepts: Decomposition, Displacement reactions, Isomerization reaction, Combination reactions,

16

SECTION - C
MATHEMATICS 80 Marks Algebra: Number System: Whole numbers, Integers, Rational and Irrational numbers, Surds and rationalization of surds, Real numbers Polynomials: Definition of a polynomial, Factorization of polynomials Factorization of quadratic and cubic expressions, HCF and LCM of polynomials. Rational Expressions: Addition, Multiplication and Division of rational expressions Linear Equations in one & two variables: Solution of Linear equations in one and two variables by cross multiplication and other simple methods; Application to practical problems. Quadratic Equations: Zeros of quadratic equations, Solution of quadratic equations by (i) factorization (ii) method of completion of square: quadratic formula, Application quadratic equations. Arithmetic Progression (AP): Definition, nth term of an A.P. , Sum of finite number of terms an A.P. Geometry: Lines, Angles and Triangles: Geometrical concepts of a point, Angle and a triangle, Angles made by a transversal with two lines, Sum of the angles of a triangle, Different criteria for congruence of two triangles, Properties of Isosceles triangle, Similar triangles, Proportionality theorems, Concurrent Lines in a triangle. Parallelograms: Definition, Properties of a parallelogram, Types of parallelograms, some theorems on parallelograms. Circles: Definition, congruence of circles, chords of a circle Arcs of a circle, Angles subtended by Arcs and chords at a point on a circle, angles in a cyclic quadrilateral, Tangents to a circle, Properties of tangents to a circle, Chord of a circle intersecting in a point, Alternate segments and its angles, Common tangents to circles. Trigonometry: Trigonometric ratios of angles of measures 00, 300, 450,600,900. Trigonometric ratios of some specific angles, solution of right triangles; Trigonometric ratios of complementary angles; Simple problems on heights and distances, Angles of elevation and depressions Mensuration: Area of a triangle, quadrilateral, Circle, sector and segment of a circle, Trapezium, Concept of perimeter of these figures. Lateral and total surface area of right triangular prisms, volume

of a right triangular prism. Lateral surface area and volume of a right pyramid, surface Area and volume of a tetrahedron, Lateral and total surface area and volume of a cuboid, cube, right circular cylinder, right circular cone hemisphere and surface area and volume of a sphere, surface area and volumes of combinations of these solids, volume and surface are of a frustum of a right circle cone Statistics and Probability: Mean, Median Mode and their properties, Measures of central tendency, Probability as a measure of uncertainty. Coordinate Geometry (2D): Distance between two points, section formula between two points.

S Y L L A B I : NEE-II (PCMB)
(i) (Syllabi for 10+2 PCM and 10+2 PCB applicants seeking admission in Diploma Module in Engineering & Technology and Degree Module in Forestry, respectively). Full Marks : 150 Time: 3 Hours (i) SECTIONS : Section-A Physics 45 marks. Section-B Chemistry 45 marks. Section-C Mathematics 60 marks. Section-D Biology 60 marks. Note: Section-C for Engineering & Technology stream (Diploma Module); and Section-D for Forestry stream (Degree Module). Sections A & B are common for both the streams.

(i)

Section-A

PHYSICS 45 marks. Physical World and Measurement: Physics scope and excitement, physics, technology and society, Forces in nature, Conservation laws, Examples of Gravitational, electromagnetic and Nuclear forces from daily-life experiences (qualitative only). Need for measurement, Units of measurement, systems of units, SI units, Fundamental and derived units, length, mass and time measurement, Accuracy and precision of measuring instruments. Errors in measurement, significant figures. Dimensions of Physical quantities. Dimensional analysis and application. Elementary concept of differentiation and integration for describing motion. Kinematics: Uniform motion in a straight line, Position time graph, speed and velocity, Uniform

17

and non-uniform motion, average speed and instantaneous velocity . Uniformly accelerated motion, velocity time graph, relations for uniformly accelerated motion (Graphical method). Scalar and vector quantities, position and displacement vectors, Equality of vectors, multiplications of vectors by real number, Addition and subtraction of vectors, Unit vector, Resolution of a vector in a plane. Rectangular components, Scalar and Vector products of two vectors, vectors in 3 dimensions (elementary idea only) Motion in a plane, Uniform velocity and uniform acceleration, projectile motion, uniform circular motion. Laws of Motion: Force and inertia, Newtons first law of motion, Momentum, Newtons second law of motion, Impulse , Newtons third law of motion, conservation law of linear momentum and its application, Equilibrium of concurrent forces, Friction, static and dynamic friction, laws of friction, rolling and sliding friction, lubrication. Dynamics of uniform circular motion, centripetal force, Vehicle on a level road, Vehicle on a banked road. Inertial and non-inertial frames (Idea only). Work, Energy and Power: Work done by a constant force and variable force, kinetic energy, Potential energy, work-energy theorem, power. Potential energy of a spring, conservative and nonconservative forces, conservation of mechanical energy (kinetic and potential energies), collisions, Elastic and inelastic collision in 1 dimension and 2 dimensions. Different forms of Energies in nature, Mass-Energy equivalence (Qualitative Idea). Motion of system of particles and Rigid Body: Centre of mass of two particle system, generalization to N-particles, momentum conservation and centre of mass motion, Application to familiar systems, centre of mass of a rigid body. Gravitation : The universal law of Gravitation, Gravitational constant, Acceleration due to gravity and its variation with altitude, latitude, depth and rotation of earth, Mass of the earth, Gravitational potential energy near the surface of earth, gravitational potential, Escape Velocity. Orbital Velocity of a Satellite. Weightlessness, Motion of Satellites, geostationary and polar satellites, Keplers laws of planetary motion. Proof of second and third law, (for circular orbit) Inertial and gravitational mass. Moment of force, torque, angular momentum, Physical meaning of angular

momentum, conservation of angular momentum with some examples ( Planetary motion). Equilibrium of rigid bodies, rigid body rotation and equation of rotational motion. Moment of Inertia & its physical significance, radius of gyration, parallel and perpendicular axis theorem (statement only) M.I. of circular ring, disc, cylinder and thin straight rod. Rolling of a cylinder without slipping. Examples of binary system in nature (Binary Stars, Earth-moon system, diatomic molecules). Mechanics of Solids and Fluids: States of matter, inter atomic and inter molecular forces. a) Solids : Elastic behavior, stress-strain relationship, Hookes law, Youngs modulus, bulk modulus, modulus of rigidity & some practical examples. b)Fluids: Pressure due to fluid column, Pascals law and its application (hydraulic lift and brakes) Effect of gravity on fluid pressure . Buoyancy, flotation, and Archimedes principle, Viscosity, Stokes law, terminal velocity, stream line flow, trubulent flow. Reynolds number. Bernoullis theorem and its applications. c) Surface energy and surface tension, angle of contact, application of surface tension, excess pressure inside a liquid drop and bubble, capillary rise and action of detergent. Heat and Thermodynamics: Kinetic theory of gases-assumptions, concept of pressure, kinetic energy and temperature, r.m.s. speed, degree of freedom, law of equipartition of energy (statement only), mean free path and Avogadros number. Thermal equilibrium and temperature (Zeroth law of thermodynamics) Heat, work and internal energy, thermal expansion-thermometry. First law of thermodynamics, specific heat, specific heat of gas at constant volume and pressure (mono atomic, diatomic gases). Specific heat of solids (Dulong and Petits law). Thermodynamic variables and equation of state, phase diagram; ideal gas equation, isothermal and adiabatic processes, reversible and irreversible processes carnots engine and refrigerator or heat pump. Efficiency and co-efficient of performance, second law of thermodynamics (statement only); and some practical applications. Transfer of heat-Conduction, convection and radiation. Thermal conductivity of solids, Black body radiation, Kirchhoffs laws, Weins displacement law, Stefans law (statement only)

18

Newtons law of cooling, solar constant and determination of surface temperature of sun using Stefans law. Oscillations: Periodic motion- period, frequency, displacement as a function of time and periodic functions. Simple Harmonic Motion (SHM) and its equation, Expression for velocity and acceleration of SHM. Oscillations of a spring, restoring force and force constant, Energy in SHM-Kinetic and potential energies, Simple pendulum- derivation of its time period, Free, forced and damped oscillations (qualitative idea only), resonance, coupled oscillations. Waves: Longitudinal and transverse wave, wave motion, Displacement relation for progressive wave. Principle of superposition of waves, Reflection of waves, Standing waves in strings and pipes, fundamental and higher harmonics, Beats, Dopplers effect, speed of sound in media. Electrostatics: Frictional electricity, charges and their conservation, coulombs law, Forces between two point electric charges. Forces between multiple electric charges; Superposition principle and continuous charge distribution. Electric fields and its physical significance, electric field due to a point charge, electric field lines, electric field due to a dipole and behavior of a dipole in a uniform electric field. Electric potential-physical meaning, potential difference, electric potential due to a point charge, a dipole and system of charges; Equipotential surfaces, Electrical potential energy of a system of two point charges and of electric dipole in an electrostatic field. Electric flux, statement of Gausss theorem and its applications to find field due to infinitely long straight wire, uniformly changed infinite plane sheet and uniformly charged thin spherical shell. Conductors and insulators, presence of free charges and bound charges inside a conductor, Dielectrics and electric polarization, general concept of a capacitor and capacitance : Combination of capacitors in series and parallel, energy stored in a capacitor, capacitance of a parallel plate capacitor with and without dielectric medium between the plates; Van de Graff generator. Current Electricity: Electric current, flow of electric charge in a metallic conductor, drift velocity and mobility and their relation with electric current, ohms law, electrical resistance, V-I characteristics, Exception, of ohms law (Non-

linear V-I characteristics), Electrical resistivity and conductivity, classification of materials in terms of conductivity; Superconductivity (elementary idea); Carbon resistors, colour code for carbon resistors, combination of resistances- series and parallel. Temperature dependence of resistance, Internal resistance of a cell, Potential difference and e.m.f. of a cell, combinations of cells in series and in parallel. Kirchhoffs laws - illustration by simple application. Wheatstone bridge and its Applications for temperature Measurements. Metre bridgespecial case of whetstones bridge. Potentiometerprinciple and application to measure potential difference, and for comparing e.m.f. of two cells. Electric power, thermal effects of current and Joules law, Chemical Effects of Current: Faradays laws of electrolysis; Electrochemical Cells- Primary (Voltaic Lechlanche, Dry Daniel,) and secondaryrechargeable cells (lead accumulators, alkali accumulators) solid state cells. Thermoelectricityorigin, elementary idea of See beck effect; Thermocouple. Thermo e.m.f. neutral and inversion temperatures. Measurement of temperature using a thermocouple. Magnetic effects of current & magnetism: Concept of magnetic field, Oersteds experiment, Biot-Savart law, magnetic field due to an infinitely long current carrying straight wire and a circular loop: Amperes circuital law and its application to straight and toroidal solenoids; Force on a moving charge in uniform magnetic and electric fields, cyclotron; Force on a current carrying conductor in a uniform magnetic field, Forces between two parallel current- carrying conductors, definition of ampere. Torque experienced by a current loop in a uniform magnetic field, moving coil galvanometerits current sensitivity and conversion to ammeter and voltmeter. Current loop as a magnetic dipole and its magnetic dipole moment, magnetic dipole moment of a revolving electron, Magnetic field intensity due to magnetic dipole (bar magnet) along the axis and perpendicular to the axis; Torque on a magnetic dipole (bar magnet) in a uniform magnetic field; Bar magnet as an equivalent solenoid, Magnetic field lines. Earths magnetic fields and magnetic elements : Para, dia and ferromagnetic substances with examples. Electromagnets and permanent magnets. Electromagnetic Induction & Alternating currents: Electromagnetic Induction, Faradays

19

Laws, Induced e.m.f. and current, Lenzs law, Eddy currents, Self and mutual inductance. Alternating currents peak and r.m.s. values of Altemating current/voltage, reactance and impedance; LC oscillations, LCR series circuit (Phasor diagram) Resonant circuits and Q-factor, Power in AC circuits, Wattless current. AC generator and transformer. Electromagnetic Waves: Electromagnetic waves and their characteristics (qualitative idea only); Transverse nature of electromagnetic waves. Electromagnetic spectrum (Radio-microwaves, infrared, optical, Ultraviolet, gamma rays) including elementary facts about their uses, Propagation of electromagnetic waves in atmosphere. Optics : Refraction of light, total internal reflection and its application, spherical lenses, thin lens formula, lens makers formula; Magnification, Power of a lens, combination of this lenses in contact; Refraction and dispersion of light due to a prism, Scattering of light. Blue colour of the sky and reddish appearance of the sun at sun-rise and sun set. Optical Instruments Compound Microscope, astronomical telescope (refraction and reflection type) and their magnifying powers. Wave front and Huygenss principle; Reflection and refraction of plane wave at a plane surface using wave fronts (qualitative idea); InterferenceYoungs double slit experiment and expression for fringe width, Coherent sources and sustained interference of light; Diffraction due to a single slit, width of central maximum, difference between interference and diffraction. Resolving power of microscope and telescope, Polarization-plane polarized light, Brewsters Law, Use of plane polarized light and Polaroid. Dual Nature of Matter and Radiation: PhotoElectric effect, Einsteins Photo-electric equation, Particle nature of light, Photo Cell, Matter waves, Wave nature of particles, De-Broglie relation, de Broglie wave length of an electron. DavissonGermer Experiment. Atomic Nucleus: Alpha-particle scattering experiment, size of the nucleus, composition of the nucleus, protons and neutrons, Nuclear instabilityRadioactivity-Alpha, Beta and Gamma particles/rays and their properties, radioactive decay law, simple explanation of decay, beta- decay and gamma-decay. Mass-energy relation, mass defect,

binding energy per nucleon, its variation with mass number. Nature of nuclear forces, nuclear reaction, Nuclear fission and Nuclear fusion. Solid and Semi-conductor Devices: Energy bands in solids (qualitative idea only), difference between metals, insulators and semiconductors using band theory; intrinsic and extrinsic semi-conductors, p-n junction, semi-conductor diode-characteristics in forward and reverse bias, diode as a rectifier, solar cell, photodiode. LED, Zener diode as a voltage regulator, Junction transistor, transistor action, characteristics of a transistor. Transistor as an amplifier (common emitter configuration) and oscillator. Logic gates (OR,AND,NOT,NAND and NOR); Elementary ideas about IC.

(i)

SECTION-B

CHEMISTRY 45 marks Some Basic concepts of chemistry: Nature of matter, properties of matter and their measurements, Law of Chemical combination, Daltons Atomic Theory, Atomic and molecular masses, Mole concept, Stoichiometry and stoichiometric calculations. Structure of Atoms and Chemical Bonding: Constituent of the atom, electronic structure of atom, understanding electron behavior, Bohrs model of hydrogen and hydrogen like atoms, spectrum of hydrogen, Dual nature of electron, de Broglie equation, Heisenbergs uncertainty principle; Quantum numbers, shapes of orbital, Aufbau principle, Paulis exclusion principle, Hunds rule of maximum multiplicity; Electronic configuration of elements up to atomic numbers 30. Chemical bonding: Lewis structure, Hybridization and VSEPR theory with reference to BeC12, BF3, CH4, CC14, NH3, H2O, NH4+, H3O+, PCl5, SF6, C2H4 and C2H2. Molecular orbital theory with reference to simple homodiatomic molecules up to atomic number 10. Hydrogen bond. Dipole moment in simple molecules. States of Matter: The gaseous state: Kinetic molecular theory of ideal gases. Laws governing the ideal behavior of gases, deviation from the ideal behavior; van der Waals equation of state

20

for real gases. Concept of critical constants, Liquefaction of gases. Solid State: Structure of simple ionic compounds, Closepacked structure, ionic radii; Silicates, Imperfections in solids, properties of crystalline solids and amorphous solids. Solutions: Types of solution, Vapor pressure of solution and Raoults law, Ideal and non-ideal solutions. Colligative properties, Abnormal molecular masses. Chemical Thermodynamics: Some basic concepts; Energy changes during a chemical reaction, Internal energy and Enthalpy. Enthalpy of reaction, First law of thermodynamics, Concept of Entropy and Free energy, Spontaneity of a process, Second and Third law of thermodynamics. Chemical Equilibrium: Equilibrium involving physical change and chemical system, Law of Mass action and its application to equilibrium. Le-Chateliers principle and its applications. Ionic Equilibria; Ostwalds dilution law; Arrhenius, Bronsted-Lowry and Lewis concept of acids and bases. pH scale, Buffer solutions and Solubility product. Chemical Kinetics: Rate of reaction, Instantaneous rate of a reaction, Molecularity and order of a reaction, Factors affecting the rate of a reaction, Elementary and complex reactions, Determination of the order of a reaction, Dependence of reaction rate on temperature and catalyst, Photochemical reactions, Mechanism of a reaction. Surface Chemistry: Adsorption, Colloidal solutions, Emulsions. Homogeneous and heterogeneous catalysis. Redox Reactions: Oxidation and reduction as an electron transfer process, Oxidation number, balancing of redox equations. Electrochemistry: Electrolytic conductance, Equivalent and molar conductivities, Galvanic
21

cell, Electrode potential and EMF of a Galvanic cell, Dependence of EMF on concentration and temperature Electrochemical cell and free energy, Electrolysis, Quantitative aspect of electrolysis, Faradays Laws, and Criteria for product formation; Some commercial batteries, Corrosion. s-Block Elements: General trends , characteristics of compounds of Alkali and Alkaline earth metals. Anomalous behaviour of Lithium and Beryllium. Some important compounds of Sodium and Calcium. Chemistry of Hydrogen, Water and Hydrogen peroxide. p-Block Elements: General trends. Anomalous behaviour of Boron and Carbon. Allotropy: Different allotropes of Carbon, Sulphur, Phosphorus, and Tin. Chemistry of some important compounds of Boron, Carbon, Silicon, Nitrogen, Phosphorus, Oxygen, Sulphur, and Halogens. Characteristics of Group-18 elements, and Chemistry of Xenon. Metallurgy of Aluminium. d- & f-Block Elements: General trends, Characteristic properties of transition and inner transition elements. General properties of first row transition metal compounds. Metallurgy of Iron and Copper. Manufacture of steel, Chemistry of some heavy metals like Silver, Gold, Zinc, Mercury, and Compounds such as Potassium permanganate and Potassium dichromate. Co-ordination and Organo-metallic Compounds: Co-ordination compounds, Isomerism and bonding in co-ordination compounds; Stability of co-ordination compounds in solution; Importance of coordination compounds. Organo-metallic compounds. Organic Chemistry: Classification and nomenclature of organic compounds, Isomerism and stereochemistry. Fundamental concepts in organic reaction mechanism, Methods of purification; Qualitative and quantitative analysis

of organic compounds; structure elucidation.

Modern methods of

Hydrocarbons: Preparation and properties of alkanes, alkenes and alkynes; Aromatic hydrocarbons, aromaticity. Preparation, properties and structure of Benzene. Organic compounds with functional group: General methods of preparation, physical and chemical properties and important uses of haloalkanes, haloarenes, polyhalogen compounds, alcohols, phenols, ethers, aldehydes, ketones, carboxylic acids and derivatives of carboxylic acids, cyanides, isocyanides, amines, nitro and azo compounds. Polymers: Nomenclature and classification of polymers, Types of polymerization, Molecular mass of polymers; Some commercially important polymers. Bio-molecules: Structure and function of carbohydrates, proteins, nucleic acids, lipids and vitamins. Nuclear Chemistry: Discovery of radioactivity and nature of radiation from radio active substances; Chemical equations for nuclear changes, Radioactive series, Rate of radioactive decay, Artificial transmutation radioactivity, Synthetic elements, Nuclear fission, Nuclear fusion. Applications of radioactivity and radioisotopes. Chemistry in Everyday life: Dyes, Chemicals in medicines, Chemistry of rocket propellants, Chemicals in food, Soaps and Detergents.

(i) SECTION-C MATHEMATICS

60 marks

Algebra: Sets: Sets and their representations, finite and infinite sets, subsets, empty or null set, universal set, equal sets, power set and complement of a set, union and intersection of sets and their algebraic properties, difference of sets, Venn diagrams, application of sets.

Relations and functions: ordered pairs, Cartesian product of sets, relations, domain, co-domain and range, into and onto functions, one one into and one one onto functions, constant function, identity function, composition of functions, invertible functions, Binary operations. Complex Numbers: Complex number in the form (a+ib), representation of complex numbers by points in plane, Argand diagram, algebra of complex numbers, real and imaginary parts of a complex number, triangle inequality, modulus and argument (or amplitude) of a complex number, conjugate, square root of a complex number, cube root of unity, polar representation of a complex number. Theory of quadratic equation: Solution of a quadratic equation in the complex number system by (i) factorization (ii) using formula, relation between roots & coefficients, the nature of roots, formation of quadratic equations with given roots, Symmetric functions of roots, Equations reducible to quadratic forms. Sequences and series: Sequence and examples of finite and infinite sequences, Arithmetic progression (A.P.)- first term, common difference and nth term, sum to n terms of an A.P., Arithmetic mean (A.M.), insertion of A.M. between any two given numbers, Geometric progression (G.P.)-first term, common ratio and nth term, Sum to n terms and infinite number of terms of a G.P., recurring decimal numbers as G.P., Geometric Mean (G.M.) insertion of G.M. between any two given numbers, Harmonic progression, Harmonic mean(H.M),relationship among A.M., G.M. and H.M, arithmetico-geometric series, special cases of n, n 2 , n 3 , exponential series concept of e as the sum of an infinite series, proof of 2<e<3, exponential function (ex) as the infinite series, logarithmic series- infinite series for loge (1+x), loge(1-x) and related problems. Permutations and combinations: Fundamental principle of counting, the factorial notation, Permutation as an arrangement, meaning of P (n,r), combination, meaning of C(n,r) ,application of permutations & combinations. Mathematical Induction: The principle of mathematical Induction, simple applications. Binomial theorems: Statement of binomial theorem, proof of the binomial theorem for positive integral

22

exponent using the principle of mathematical induction, general and middle terms in binomial expansions, Binomial theorem for any index (without proof), application of binomial theorem for approximation and properties of binomial coefficients. Mathematical logic: Mathematical Logic statement, Venn diagrams, negation, basic logical connectives and compound statement including the negations, truth tables, duality algebra of statements and applications of logic in solving simple problems. Matrices and determinants: Types of matrices, Equality of matrices, operations of addition, scalar multiplication and multiplication of matrices, statements of important results on operations of matrices and their verification by numerical problems only, linear equations in matrix notation, determinants, determinant of a square matrix, properties of determinants, minors & cofactors of determinants, applications of determinants in (i) finding area of a triangle (ii) Solving a system of linear equations, Cramers rule, transpose, adjoint and inverse of a matrix, consistency and inconsistency of system of linear equations, application of matrices in solving simultaneous linear equations in two or three variables. Boolean Algebra: Boolean algebra as an algebraic structure, principle of duality, Boolean function, conditional and biconditional statements, valid arguments, switching circuits, application of Boolean algebra to switching circuits. Trigonometry: Trigonometric functions of sum and difference of numbers, Trigonometric functions of multiples and submultiples of numbers, conditional identities for the angles of a triangle, Solution of trigonometric equations, solution of triangles, concept of inverse trigonometric functions and their use to reduce expression to simplest form. Vectors: Vectors & scalars, Magnitude and direction of a vector, types of vectors, position vector of a point dividing a line segment in a given ratio, components of a vector, addition of vectors, multiplication of a vector by a scalar, scalar (dot) product of vectors, projection of a vector on a line, Vector (cross) product of two vectors, application of dot & cross products in (i) finding area of a triangle and a parallelogram (ii) problems of plane geometry and trigonometry (iii) finding work done

by a force (iv) vector moment of a vector about a point, scalar triple product and its applications, Moment of a vector about a line, co planarity of three vectors or four points using scalar triple product, vector triple product . Coordinate Geometry: Two Dimension: (i) Area of a triangle, condition for the collinearity of three points, centroid and in-centre of a triangle, locus and its equation. The straight line and pair of straight lines Various forms of equations of a line, intersection of lines, angles between two lines, condition for concurrency of three lines, distance of a point from a line, coordinates of orthocentre and Circum centre of a triangle, equation of family of lines passing through the point of inter- section of two lines, homogeneous equation of second degree in x & y , angle between pair of lines through the origin, combined equation of the bisectors of the angles between a pair of lines, condition for the general second degree equation to represent a pair of lines, point of inter-section and angle between two lines represented by S=0 and the factors of S. Circles: Standard form of the equation of a circle, general form of the equation of a circle, its radius and center, equation of a circle in the parametric form, equation of a circle when the end points of a diameter are given, points of inter- section of a line and a circle in the center at the origin and condition of a line to be tangent to the circle, length of tangent, equation of the tangent, equation of a family of circles through the inter- section of two circles, condition for two inter- secting circles to be orthogonal. Conic sections- Sections of cones, equations of conic sections (parabola, ellipse, hyperbola) in standard forms, conditions for y=mx+c to be a tangent and points of tangency. Geometry of Three Dimension (3D): Coordinate axes, planes in three dimensional space, coordinates of a point in space, distance between two points, section formula, d.c.s. and d.r.s. of a line joining two points, projection of the join of two points on a given line, angle between two lines whose d.r.s. are given, Cartesian and vector equation of a line through (i) a point and parallel to a given vector (ii) through two points, co- linearity of three points, coplanar & skew line, shortest distance between two lines, condition for the intersection of two lines, Cartesian & vector equation of a plane (i) when the

23

normal vector and the distance of the plane from the origin is given (ii) passing through a point and perpendicular to given vector (iii) passing through a point and parallel to two given lines through the intersection of two other planes (iv) Containing two lines(v) Passing through three points, Angle between two lines (ii) two planes (iii) a line and a plane. Condition of co-planarity of two lines in vector and Cartesian form, Length of perpendicular of a point from a plane by both vector and Cartesian methods, vector and Cartesian equation of a sphere, its center and radius, diameter form of the equation of a sphere. Calculus: Function, Limits and Continuity: Concept of real function, its domain and range, types of functions, limit of a function, meaning and related notations, left and right hand limits, fundamental theorems on limits, limit at infinity and infinite limits, continuity of a function (i) at a point (ii) over an open/closed intervals, Sum, product and quotient of continuous functions, continuity of special functions-polynomial, trigonometric, exponential, logarithmic, inverse trigonometric functions. Differentiation: Derivative of a function, its geometrical and physical significance, Relationship between continuity and differentiability, derivative of some simple functions from first principle, derivative of sum, difference, product and quotient of functions, derivative of polynomial, trigonometric, exponential, logarithmic, inverse trigonometric and implicit functions, derivative of functions expressed in parametric form, chain rule and differentiation by substitution, Derivatives of second order. Application of Derivatives: Rate of change of quantities, tangents and normals, increasing and decreasing functions and sign of the derivatives, maxima & minima, greatest and least values, Rolles theorem and mean value theorem (without proof ), curve sketching of simple curves. Indefinite integrals: Integration as inverse of differentiation, properties of integrals, integration by substitution, by parts, partial fractions and their use in integration, integration of rational and irrational functions, integration of trigonometric functions of the type

Definite Integrals: Definite integral as limit of a sum, fundamental theorems of integral calculus (without proof), evaluation of definite integrals by (i) substitution (ii) using properties of definite integrals , application of definite internals in finding the areas bounded by a curve, circle, parabola and ellipse in- standard form between two ordinates and x-axis , area between two curves (line and circle, line & parabola, line & ellipse). Differential Equations: Definition, order and degree, general and particular solution, formation of a differential equation whose general solution is given, solution of differential equation by the method of separation of variables, homogeneous differential equations, linear differential equation of the type

dy + py = Q (x) whose p ( x) & Q( x) are dx

a + b cos x' a + b sin x and sin

dx

dx

x cos n xdx.

functions of x, Solution of second order differential equations. Statics and Dynamics: Elementary StaticsIntroduction, basic concepts, laws of mechanics, force, resultant of forces acting at point, parallelogram Law of forces, resolved parts of a force, equilibrium of a particle under three concurrent forces, triangle law of forces and its converse, Lamis theorem and its converse, two parallel forces, Like and unlike parallel forces, couple and its moment. Elementary Dynamics: Basic concept. like displacement, speed, velocity, average speed, instantaneous speed, acceleration and retardation, resultant of two velocities, Motion of a particle along a line when moving with constant acceleration, motion of a particle under gravity, projectile motion, the path of a projectile, its horizontal range, velocity at any instant, greatest height and time of flight. Probability: Random experiment and associated sample space events as subsets of sample space, occurrence of an event, impossible events, sure events, combination of events through the operations and, or, not and their set representation, meaning of equally likely outcomes, definition of probability of an event as the ratio of the number of favorable equally likely outcomes to the total number of outcomes, equally likely events, addition rule for mutually exclusive events, Conditional probability, independent-events, independent experiments, Calculation of probability of events associated with the independent
24

experiments P (A or B), P (A and B) , Bayes theorem and its application, recall of concept of random variables and its probability distribution, mean and variance of random variables, Binomial and Poissons distributions, their mean, variance and application of these distributions in commerce and industry.

(i)

SECTION-D

BIOLOGY 60 Marks Origin and Evolution of life: Theories and evidences of origin of life, Concept of species, speciation and isolation; Homeostasis; Scope of biology; Classification-artificial, natural and phylogenetic; Binomial nomenclature; Status of bacteria and virus. Cell biology : Ulta structure of cell; cell organelles and their function; Cell division; Karyotype analysis; Chromosomal basis and other patterns of inheritance; Linkages and crossing over; Mutation and chromosomal aberrations; Gene mapping; Human genetics; Structure of RNA and its role in protein synthesis; Gene expression and its regulation; Nuclear basis of differentiation and development; Oncogenes; DNA as a genetic material; Recombinant DNA technology; Gene bank; DNA fingerprinting; Genomics-principles and applications; Transgenic plants, animals and microbes. Physiology of plants and animals: Plant water relations; Transpiration; Photosynthesis; Respiration, glycolysis, Krebs cycle, compensation point, Respiratory Quotient; Food and Vitamins; Inter- and intra-cellular digestion; Role of hormones and enzymes in digestion; malnutrition; Respiration and circulation in animals; Blood, its composition and related disorder; Osmoregulation and excretion. Reproduction and growth in plants and animals: Vegetative, micropropagation and sexual reproduction; Flowering-Photoperiodism, Vernalization; Pollination; Double fertilization; Parthenogenesis and Parthenocarpy; Reproduction in animal-embryonic development, growth, repair, aging and death; Movement and locomotion in plants and animals; Nervous coordination in animal; Phytochromes; seed germination; Role of growth regulators in seed dormancy. Ecology and Environment: Organism and the environment; Population, community, ecosystem and biosphere; Major biomes; Ecological

succession; Productivity; Energy flow in ecosystem; Nutrient cycling; Natural resources and its conservation; Biodiversity; Environmental pollution; Global environmental changes; Environmental ethics and legislation. Morphology of plants and animals: Morphology and modification of root, stem and leaf; Inflorescence, flower, fruit, seed structure and types; Description of family poaceae, liliaceae, fabacae, solanaceae and asteraceae; Meristematic and permanent tissues; Anatomy of root, stem and leaf; Secondary growth; Animal tissues-structure and function of epithelial, connective, muscular and nervous tissues; Salient features of earthworm, cockroach and rat. Application of biology: Human population growth and factors; Common problem of drug, Alcohol and tobacco; Mental and addictive disorder; Common human diseases; Technology for medical application; Plant tissue culture and its application; Bioenergy; Biopesticide; Biopiracy; Bioethics; Domestication and improvement of plants and animals; Biomedical technologies such as radiography, angiography, sonography, ECG,EEG,ELISA test; Types, detection and diagnosis of cancer.

(ii) S Y L L A B I : NEE-II (Vocational)

(For 10+2 vocational / ITI / NERIST Certificate holder applicants seeking admission to Diploma module in Technology stream).

Full Marks : 150 Time: 3 Hours. (ii) SECTIONS : Section-A Physics 25 marks. Section-B Chemistry 25 marks. Section-C Mathematics 30 marks. Section-D Vocational Subject 70 marks.

(ii) Section-A
PHYSICS 25 Marks.

25

Units and dimensions: Units for measurements, systems of units, fundamental and derived units, SI units. Dimensional analysis and their applications. Motion in one and two dimensions : Objects in motion in one dimension, motion in a straight line, uniform motion, its graphical representation and formulae, speed and velocity, instantaneous velocity, uniformly accelerated motion, its position-time graph, velocity-time graph and formulae. Vectors and scalars, representations of vectors in two dimensions, unit vector, vector addition and multiplication, Resolution of vectors in plane, rectangular components, Scalar and vector products, Motion in two dimensions, projectile motion, uniform circular motion. Laws of motion: Force and inertia, first law of motion, Momentum, second law of motion, impulse, Third law of motion, examples of third law, linear momentum, conservation of linear momentum, Equilibrium of concurrent forces, Static and kinetic friction, laws of friction, rolling friction, lubrication. Work, Energy and Power: Work done by a constant force, Kinetic and potential energy, power, Workenergy principle, Spring constant, Gravitational potential energy, Conservation of energy, Elastic collision in one dimension. Rotational motion: Centre of mass of a two-particle system, centre of mass of a rigid body, general motion of a rigid body, motion of centre of mass, nature of rotational motion, rotational motion of a single particle in two dimensions, Uniform circular motion and their examples, Torque, angular momentum, conservation of angular momentum, Moment of inertia and its physical significance. Gravitation: Newtons law of gravitation, universal gravitational constant G, acceleration due to gravity g, mass and density of the earth, inertial and gravitational mass, variations of g. Gravitational potential energy near the earths surface, gravitational potential, orbital velocity, escape velocity, geostationary satellite. Properties of matter: Inter atomic and intermolecular forces, states of matter, Elastic properties of solids, Hookes law, Youngs modulus, bulk modulus and modulus of rigidity. Fluid pressure, Pascals law, buoyancy, flotation, Archimedes principle, Atmospheric pressure. Surface Energy and Surface Tension, angle of contact, Capillary rise, Viscosity, Stokes law,

streamline & Turbulent flow, Reynolds number, Bernoullis Theorem & its applications. Heat and thermodynamics: Kinetic theory of gases, pressure exerted by a Gas, kinetic Energy & Temperature, Measurement of temperature, Absolute temperature scale, Gas Laws and Avogadros number. Specific heat of solids & liquids, Latent heats of fusion & vapourisation , Transfer of heat. Oscillations and waves: Periodic motion, simple harmonic motion, equation of simple harmonic motion, kinetic and potential energy in simple harmonic motion, Oscillations due to a spring mass system, simple pendulum, time period of a simple pendulum. Wave motion, speed of a wave, principle of superposition, reflection of wave, Standing waves in string (graphical representation only), Sound wave and its propagation in different media, Effect of pressure and temperature on velocity of sound waves, characteristics of sound waves. Electrostatics: Frictional Electricity, charges and their conservation, Coulombs law, Electric field and potential due to a point charge, Dipole, its fields along the axis, Concept of dielectric and dielectric constant, Conductors and insulators. Presence of free charges and bound charges inside a conductor, Capacitance, parallel plate capacitor with air and dielectric medium between the plates, series and parallel combination of capacitors, energy stored in a capacitor, van de graaff generator. Current electricity: Electric current, Ohms law, resistivity, resistance of different materials, temperature dependence of resistance, resistances in series and parallel, Kirchhoffs law - illustrations by simple examples, Wheatstone bridge and its applications for comparing emf of two cells and determination of internal resistance of a cell, Electric power and heating effects of current . Magnetic effect of current: Oersteds experiment, Force on a moving charge in a uniform magnetic field, Force on a current carrying conductor and torque on current loop in a magnetic field, forces between two parallel current carrying conductors, definition of Ampere, Moving coil galvanometer and its conversion into ammeter and voltmeter. Magnetism: Natural and man made magnets, properties of bar magnet, current loop as magnetic dipole, Lines of force in a magnetic field, Comparison of bar magnet and solenoid, Earths magnetic field, Tangent galvanometer, vibration

26

magnetometer, Electromagnets and permanent magnets. Electromagnetic induction and alternating current: Induced emf, Faradays laws, Lenzs law, electromagnetic induction, self and mutual inductance, Ray Optics and Optical Instruments : Sources of light, luminous intensity, luminous flux, Reflection of light at plane and spherical surfaces, Curved mirrors, mirror formula. Refraction of light, refractive index, total internal reflection, spherical lenses, thin lens formulae, lens makers formula, magnification. Refraction and dispersion of light due to prism, spectrometer - its use for the determination of refractive index of material of a prism, Scattering of light in atmosphere, primary rainbow, Optical instruments - simple and compound microscopes, refracting and reflecting telescopes.

Gaseous State: Physical properties of gases, Laws governing their behavior (Boyles Law, Charles Law, Gay-Lussacs Law, Avogadros law, Daltons law of partial pressure, Grahams law of diffusion), Ideal gas equation, Kinetic molecular theory of ideal gases, Deviation from ideals behaviour, van der Waals equation of state; Continuity of states, Importance of critical constants, Liquefaction of gases. Chemical Equilibrium: Reversible reaction, Law of mass action and its application to chemical equilibrium, Homogeneous and heterogeneous equilibrium, Le Chateliers principle and its application, Ionic equilibria. Theory of electrolytic dissociation, Ostwalds dilution law; Arrhenius, Bronsted Lowry and Lewis concepts of acids and bases. Redox Reactions: Oxidation and reduction processes (classical and modern concepts), Oxidation state, Calculation of equivalent mass of oxidizing and reducing agents, Balancing of redox reactions using oxidation number and ionelectron methods. Electrochemistry: Faradays laws of electrolysis (statement, explanation and application), Numerical problems; Electrical conductance, specific conductance, equivalent and molar conductances; General concept of Galvanic cell and its representation; Electrode potential, Standard hydrogen electrode and reference electrode, Electro-chemical series and its applications, EMF of a Galvanic cell, Nernst equation for electrode and cell potentials; Some commercial cells and batteries. Organic chemistry: Classification of organic compounds, Nomenclature of hydrocarbons and compound containing one functional group, homologous series, Isomerism. General methods of preparation and properties of Alkanes, Alkenes and Alkynes. Aromatic hydrocarbons, Structure of benzene. Electrophilic substitution reactions in benzene. Organic compounds with one functional group: Simple methods of preparation and

(ii) Section-B
CHEMISTRY 25 Marks. Structure of Atom: Discovery and properties of sub-atomic particles (electron, proton and neutron), Rutherfords atomic model, Bohrs model of hydrogen and hydrogen-like atoms, Spectrum of hydrogen, Heisenbergs uncertainty principle, Dual nature of electron, de-Broglie equation, Quantum numbers, Concept of atomic orbital, Paulis exclusion principle, Hunds rule of maximum multiplicity, Aufbau principle, Electronic configuration of elements up to atomic number 20. Chemical Bonding: Ionic, Covalent, Coordinate covalent, Hydrogen and metallic bonds, Properties of compounds having these bonds. Hybridization and VSPER theory for the molecular shape of simple molecules such as BeC12, BF3, CH4, CC14, NH3, H2O, NH4+, H3O+, PCl5, SF6, C2H4 and C2H2. Periodic Properties of Elements: Mendeleevs periodic table and long form of the periodic table (Main features, merits and demerits), Periodic properties (Metallic characters, ionization potential electron affinity and electronegativity), Classification of elements into s, p, d and f blocks, General trends of periodic properties of s- and p-block elements.

27

properties of Halo-alkanes, Alcohols, Phenols, Ethers, Aldehydes, Ketones, Carboxylic acids, Derivatives of carboxylic acid, amino-, cyano-, isocyano-, azo-, and nitro- compounds.

(ii) Section-C
MATHEMATICS 30 Marks. Trigonometry : Trigonometric ratios of compound, multiple and sub-multiple angles, General solution of trigonometric equations, Properties and solution of triangles, Inverse circular functions. Algebra: (i) Complex Numbers : Complex number and its properties, Different forms of complex numbers, roots of complex numbers, cube roots of unity and their properties, De-Moivres theorem. (ii) Progressions : Arithmetic and Geometric progressions, Arithmetic and Geometric means, Harmonic Progression, sum of n-terms and nth terms of A.P. & G.P. (iii) Permutation and combinations, Binomial theorem for positive integral index, Middle term, greatest term, Binomial coefficients. (iv) Partial fractions of different forms (v) Determinants of order two, three and their properties. Coordinate Geometry(2D): Coordinates of a point in a plane, distance between two points, Division of a line segment in a given ratio (internal and external division), Different forms of equation of a straight line, Distance of a point from a line, Angle between two lines, Bisector of an angle between two lines, Pair of straight lines, Equation of a circle, tangent and normal to a circle, Equation of second degree representing a conic section, Basic ideas about parabola, ellipse and hyperbola. Coordinate Geometry (3D): Coordinates of a point in three dimensions, Distance between two points, division of join of two points. Angle between two lines, Direction cosines and direction ratios of a line, Projection of a point on a line. Equation of a plane, Different forms of equation to a plane, Angle between two planes, Plane through three given points, Angle between a plane and line, Equation of a straight line in space, Coplanar lines, shortest distance, centre and radius of sphere. Vector Algebra: Vector and its components, Different kinds of vectors, Addition and subtraction of vectors, scalar and vector products of two and three vectors.

Differential Calculus: Functions and their representation limit, continuity and differentiability of a function, Derivatives of elementary functions Derivatives of sum, product and quotient of functions, Derivatives of exponential, logarithmic and hyperbolic functions. Successive differentiation and Leibnitz theorem, Rolles theorem and Lagranges mean value theorem, L`Hospitals Rule, Curvature, Asymptotes, and concepts of curve tracing, Maxima & minima of functions of one variable. Integral Calculus: Integration, Integral of elementary functions, Integration by parts and by substitution, Integral of rational functions and trigonometric functions, Integration of irrational functions Definite Integrals, Area under simple curves. Statistics: Mean, median, mode and standard deviation of discrete and grouped data.

(ii)

Section-D

VOCATIONAL SUBJECT 70 Marks. Note: Each Vocational Subject (from Sl. No. 1 to 8) consists of the Syllabus of Common Engineering Sciences (a) and that of one Trade/Branch subject (b) appropriate to the academic qualification of an applicant.

(1) AE(FE) - Agricultural Engineering.

Farm Equipment Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales, Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining, filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components. Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment

28

of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical, mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Farm Equipment Trade: (20 questions of 1-mark each & 15 questions of 2marks each). Tractors and power tillers : History of tractor and power tillers, technical specifications of various types and models of tractors and power tillers. Working principles of tractor and power tiller engines including fuel system, cooling system, lubrication, air intake and exhaust system. Working principles of clutch, gear box, final drive, steering, brake, hydraulic and electrical system. P.T.O. and belt pulley. Wheels and ballasting. Farm machinery : Agricultural mechanization, scope, benefits and limitations. Land reclamation machinery . Equipment required for seedbed preparation, sowing, planting, interculture, irrigation, plant protection, harvesting and threshing. Implement hitching, safety in operation, Machinery management. Servicing and maintenance : Selection of site for establishing centre for repair and overhaul of tractors. Selection of hand tools, workshop machines, materials, seals and packing. Repair and preventive maintenance of general purpose machine components like fasteners, bearing, coupling, spring and elements of rotary motion drive. Fault diagnosis of various systems of engine, tractor and power tiller, checking of wear and tear, repair of worn out components and maintenance. Routine and preventive maintenance of tractor, repair and maintenance of farm equipment and land reclamation machinery.

Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining, filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components. Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical, mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Food Processing Trade: (20 questions of 1-mark each & 15 questions of 2marks each). Food material characteristics and properties. Chemistry and microbiology of food, its processing and preservation. Food additives, Browning reaction. Adulteration and food laws. Nutritive value of foods. Unit operation in food processing like washing, cleaning, sorting, grading, sizing, screening, heating, cooling, blanching, smoking and material handling etc. and related equipments. Food preservation principles and methods. Food processes such as drying, dehydration, heat treatment, refrigeration, freezing, fermentation, irradiation, evaporation and concentration etc. Food packaging materials and methods. Processing and preservation methods of fruits and vegetables, milk, fish, meat and egg etc. and manufacture of their different products. Instrumentation in food industry, Instruments for measurement of process parameters, Steam generation, refrigeration and plant utilities in a food processing plant, Equipment servicing, repair and maintenance of common post harvest (including pulse and cereal milling), food and milk processing operations. Food grade engineering materials. Cleaning, hygiene, sanitation and

(2) AE(FP) - Agricultural Engineering.

Food Processing Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales,
29

sterilization of food processing and handling equipment.

(3) CE(CT) - Civil Engineering.

Construction Technology or Draftsman / Surveyor Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales, Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining, filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components. Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical, mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Construction Technology or Draftsmanship / Surveyor Trade: (20 questions of 1-mark each & 15 questions of 2-marks each). Construction Material : Rocks, bricks, tiles, sand, cement, lime and cement mortar, concrete, timber, steel, paints and varnishes, distemper, plastics, glasses, asphalt, sound and heat insulating materials. Construction and Maintenance : Building Construction: Types of Brick and Stone masonry; Types and components of foundations, floors, doors and windows, arches and lintels, walls, stairs and roofs; Roads: Geometric features of road WBM and BBM pavements, Equipments used in road construction; Railways: Components, Construction and maintenance of tracks, Points and Crossings;

Hydraulic Structure: Types and construction of Dams and Canals. Surveying: Various surveying instruments; Methods of chain surveying, compass surveying, plane table surveying, theodolite surveying, leveling and contouring. Water Supply and Sanitation : Sources of water, pumps, types of distribution systems, appurtenances in distribution system, sanitary system, construction and maintenance of sewers. Different types of water supply and sanitary fittings, Septic tanks. Civil Engineering Drawings: Signs and symbols used in Civil Engineering Drawings, Drawings related to : Different types of masonry bonds, Substructure details, Timber joints, Riveted, Bolted and Welded joints, and Steel and Timber trusses. Estimation and Quantity Surveying : Types and methods of estimates; Estimation of earthwork, masonry, RCC works, flooring, plastering, white washing and painting, sanitary fittings; Specifications of construction materials and various items of works.

(4) ECE(ET or EM) - Electronics Communication Engineering.

Electronics Technology or Electronics Maintenance Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales, Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining, filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components.

30

Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical, mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Electronics Technology or Electronics Maintenance Trade: (20 questions of 1-mark each & 15 questions of 2marks each). Circuits and Devices: Semiconductors, type of semiconductors, doping, p-n junction diodes and their characteristics, Bipolar transistor, transistor, biasing, CE, CB and CC configurations and their characteristics, principles of class A,AB,B & C amplifier, gain, bandwidth, introduction to feedback amplifiers, Sinusoidal oscillator, clipping and clamping circuits, Mono-stable and Astable multivibrators. Fundamentals of Communication & Radio Engineering: E.M. wave propagation - ground wave, space wave and sky wave, Antenna radiation, different types of Antenna, Analog communication, AM, FM, principles of multiplexing - FDM & TDM, Introduction to digital communication, Multi channel telephony, Super heterodyne receiver, typical circuits of various stages of transistorized receivers, working principle, RF and IF alignment, AVC and AGC. T.V. and Audio System: Monochrome T.V., Interlace scanning, synchronization, blanking pulses, bandwidth requirement, VSB, Picture resolution, typical circuits of the Video amplifier and EHT stages, function of keyed AGC, AFC, various controls in a T.V. receiver, Acoustics, high fidelity and high quality sound, sound recording - Disc and Tape, pool recording systems, equalization, Microphones and speakers, P.A. system, Record player, concept of Hi-Fi stereo. Instruments : Resistors, capacitors and inductors, Printed circuit board. Ammeter and Voltmeter different types and their working principle. Analog and digital multimeters, DC power supply, Cathode ray oscilloscope and signal/function generators.

Engineering.
Electrical Technology or Electrical Maintenance Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales, Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining, filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components. Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical, mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Electrical Technology or Electrical Maintenance Trade: (20 questions of 1-mark each & 15 questions of 2marks each). Basic Electricity: Primary, Secondary cell and charging of lead acid batteries, Capacitance and inductance their series, and parallel connection and energy storage, A.C. fundamental, wave shape, cycle, frequency, time period, peak, average and r.m.s. value, form factor, phase difference, peak factor, power factor, Series A.C. RLC circuit. Electrical Machine: Magnetic effect of current, Faradays law of electro-magnetic induction, force acting on a current carrying conductor in a magnetic field and torque production, D.C. machine-working principle of D.C. motor and D.C. generator, D.C. motor starting and speed control, common faults, causes, testing and applications, Single phase transformer - working principle. Turns ratio, voltage, current, power relation and applications, Single

(5) EE(ET or EM) Electrical

31

phase A.C. motor - commonly used single phase A.C. motors, starting, speed control, installation, testing, common faults and their causes and testing, Universal motor. Instruments: Permanent magnet moving coil and moving iron, voltmeter and ammeter, Dynamometer type wattmeter, ohm meter, megger, induction type energy meter, their connection and application for measurement. Electrical Appliances: Construction, principles, connection, common faults their causes and testing of the following equipments, Electric room heater, electric iron, electric stove, geyser, electric kettle, electric fans, (ceiling and table fan). House Wiring : Cleat wiring, casing and capping wiring, batton wiring, conduit wiring and PVC wiring, controlling of lamps from two of three places. Schematic diagram of service connection. Testing and connection of domestic wiring installation, Wiring faults and rectification, Installation of plate and pipe earthing, Procedure for measurement of earth resistance. Electrical Drawing: Symbols used for common electrical equipments/appliances, Simple schematic and wiring diagrams.

mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Mechanical Craftsmanship Trade: (20 questions of 1-mark each & 15 questions of 2marks each). Sheet metal operations, Tools and their specifications, carpentry (selection and wood working), pattern making; Various fitting tools and their specifications; Limits, fits and tolerances; Engineering and geometrical drawing; projections; isometric drawing; Reading engineering drawings; Basic manufacturing processes like casting, forming welding and metal cutting, various casting processes, sand casting, die casting, centrifugal casting. Casting defects, melting furnaces. Forging hammers and presses and various forging operations like upsetting, drawing, punching, etc. stock calculations. Various welding processes and equipments, Are welding, gas welding, electrode specification and IS codes, Arc characteristics, TIG, MIG welding, soldering and brazing. Various machine tools like lathe, milling, shaping, drilling machines, simple calculations, Various operations like turning, facing, threading, knurling, groove cutting etc., Taper, thread cutting calculations, gear cutting on milling machine; different Grinding methods; Materials for machine tool components and cutting tools, cutting fluid, lubricants. Measuring Tools (i.e. vernier, micrometer, gauges, comparators etc.).

(6) ME(MC) - Mechanical Engineering

Mechanical Craftsmanship Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales, Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining, filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components. Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical,

(7) ME(AT) - Mechanical Engineering

Automobile Technology Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales, Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining,

32

filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components. Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical, mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Automobile Technology Trade: (20 questions of 1-mark each & 15 questions of 2marks each). Different types of automobiles, types of IC engine and their components, auto cycle and diesel cycle, IHP, BHP and FHP and their calculations, cooling system, lubrication system, differential, transmission system, braking system, and lighting system, Two stroke/four stroke engines, valve timing diagrams, carburetor and injector repairing of trouble shooting and remedial measures, servicing of a vehicle, repairs, functions of gear box of scooter, car or truck, working of dynamo, fuel pumps, function of clutches, motor cycles or scooters, steering mechanism, wheels and tyres and their repairs.

Mechanics : Vector concept, force and force system, static equilibrium, Newtons laws of motions and derived concepts like friction, centroid, area, moment of inertia, work energy principle and application of impulse. Electricity : Concept of voltage, current, resistance, power and energy, relation between electrical, mechanical and thermal units, temperature weft of resistance. Ohms law, series, parallel, circuits and Kirchoffs law, Capacitance and inductance. (b) Refrigeration & Air Conditioning Trade: (20 questions of 1-mark each & 15 questions of 2marks each). Refrigeration systems, Air cycle refrigeration, vapor compression cycle, deviation of actual cycle from the theoretical cycle, study of charts and tables for refrigerants. Refrigeration of refrigeration processes on temperature - entropy and pressure - enthalpy diagrams. Absorption - compressor, evaporator, pumps, valves. Object of air conditioning, humidification and dehumidification, drying, evaporative cooling, comfort charts, year round air conditioning, air conditioning of cold storage, auditorium, aircrafts, locomotives. Sensible and latent heat, heat load calculation, Psychrometry, use of psychrometric chart, air distribution and Ventilation systems, Types of fans and their ratings and mountings.

(8)ME(RAC)- Mechanical Engineering

Refrigeration & Air Conditioning Trade: (a) Common Engineering Sciences: (10 questions of 1-mark each & 5 questions of 2-marks each). Engineering Drawing : Lines, lettering and dimensioning, geometrical construction, scales, Engineering curves, conic sections, cycloid, Projection of points, straight lines, planes and solids, Sectional views, Isometric views, Auxiliary Projections. Workshop : Hand tools for carpentry and fitting, forging, welding, specification and use; various operations : sawing, planning, chiseling, joining, filing, marking, chipping, gas cutting, maintenance and types of maintenance (preventive and corrective), materials for machine components.

S Y L L A B I : NEE-III
(For 3-year Diploma holder applicants in the allied disciplines / branches, see Appendix-III, seeking admission to Degree Module in Engineering & Technology). Full Marks : 150 Time: 3 Hours. SECTIONS: Section-A Physics 25 marks. Section-B Chemistry 25 marks. Section-C Mathematics 30 marks. Section-D BRANCH SUBJECT 70 marks.

Section-A
PHYSICS 25 Marks. Units: Fundamental & derived units with particular reference to S.I. units-illustrations. Explanation of dimensions with examples. Mechanics: Explanation of vector and scalar quantities with examples. Displacement as vector
33

quality. Concepts of instantaneous velocity, acceleration. Equations of motion. Definition and explanation of Laws of motion, force, mass and weight with mathematical expressions, Universal Laws of gravitation and Projectile motion. Explanation of circular motion, Satellite motion in an orbit: Keplers Laws, escape velocity. Rigid body motion, moment of inertia, angular momentum, torque, Centre of mass, conservation of angular momentum. Simple harmonic motion and its geometric representation. Derivation of its equation. Concepts of amplitude, Oscillation, time period, frequency and phase with their mathematical expressions. Definition and explanation of work, power and energy with mathematical relation. Problems involving potential and kinetic energies and conservation of energy. Conservative and non-conservative forces. Static and Dynamic friction. Properties of Solids: Definition and explanation of strain, stress, elastic limit, ultimate strength, Hookes Law and Youngs modulus. Compression bending, twisting and shear. Elastic moduli and their relations, Poissons ratio. Concepts and examples of properties e.g. hardness, malleability, ductility, brittleness, toughness abrasion resistance, fatigue. Properties of Liquids: Thrust of a liquid and pressure, Pressure at different depths, Pascals Law and Hydraulic press, Buoyancy, Archimedes Principle: definition and explanation with illustration; surface tension, viscosity, fluidity and volatility. Heat & Thermodynamics: Heat and temperature, Construction of mercury thermometers. Measurement, measuring scales and devices. Definition and explanation of linear expansion. Area and volume expansion with mathematical relation. Expansion of gas at constant temperature and at constant pressure. Ideal gas equation. Measurement of specific heat capacity, relation between Cp and Cv, Isothermal and adiabatic process. Explanation of change of state of matter with change of temperature. Definition of latent heat of fusion and vaporization and numerical examples. Transfer of heat, Explanation and examples of conduction, Convection and radiation processes.

Thermal conductivity. Idea of black body radiation. Stefan-Boltzmann Law. Explanation of first and second laws of Thermodynamics with examples. SOUND: Wave motion, Concept of longitudinal and transverse waves; Definition of period, frequency, wave length, amplitude and phase; Speed of sound wave; wave propagation in a medium; Doppler effect. Properties of sound waves, Reflection, Refraction and Superposition of waves, stationary waves, beats, Vibration of Strings and Air columns, concept of resonance; Echo, Reverberation. LIGHT: Explanation of light wave, wave front, ray, velocity of light. Laws of reflection, reflection in different types of mirrors (plane, spherical, cylindrical, parabolic) with their geometrical drawing. Definition of image, focal length, radius of curvature, magnification with formula, numerical examples and application. Laws of refraction, refractive index, total internal reflection, concave and convex lenses and image formation through them, formula connecting object and image distances, application in telescopes, microscopes, theodolite etc., refraction through prism. Elementary ideas of electromagnetic waves. Wave nature of light. Youngs double slit experiment and Fringe width. Single slit diffraction, polarisation. Electrostatics: Explanation of charge on the basis of electron theory, charging by friction, force between electric charges, concept of unit charge, electric field and electric potential, p.d. and its measurement, definition of capacitance of parallel plate capacitor, capacitors in series and parallel. Dielectric constant. Current Electricity: Definition of emf, potential difference, and current with illustrations. Basic direct current circuits: Units of current, resistance and conductance, Ohms Law and solution of simple problems, effect of temperature on resistance. Series and parallel connections of resistors. Kirchoffs rules, their applications and examples. Magnetic Properties of Materials: Type of magnetic substances, magnetic flux, flux density, relative permeability, magnetic properties of soft iron and steel.

34

Electromagnetism: Nature of magnetic field due to a straight conductor, a circular conductor and a solenoid, Flemings left hand and right hand rules, Effect of current flowing through two parallel conductors, Biot - Savart Law. Electromagnetic induction: e. m. f. induced in a coil by magnet, Faradays law of induction, Calculation of e.m.f., Direction of induced e .m .f. Lenzs Law, Explanation of eddy current and explanation of self and Mutual induction, Calculation of self and mutual inductance. Generation of alternating e.m.f. Concept of reactance : Capacitive and inductive, Impedance. Simple a.c. circuits analysis. Modern Physics: Photoelectric effect, structure of atom, atoms and molecules, intermolecular forces, chemical bonding. Crystal structure with simple examples. Radio-activity: Explanation of fission and fusion processes. Semiconductors: Properties and basic principles, p and n types, Action of transistors. Section-B CHEMISTRY 25 Marks. Physical Chemistry: States of Matter: Gaseous State: Postulates of kinetic theory of ideal gases; Derivation of kinetic equation; Derivation of Ideal gas equation. Continuity of states, Liquefaction of gases. Solid State: Structure of solids, unit cell, fcc, bcc, ccp structure of solids. Solution and Colloidal solution: Concentration of solutions: Mass percent, Mass fraction, Mole fraction, Molality, Normality, Molarity. Dilute solutions: Raoults law, its statement and explanation; Ideal and non-ideal solutions; Colligative properties: Relative lowering of vapour pressure, Elevation in boiling point, Depression in freezing point, Osmotic pressure and its determination. Determination of molecular masses based on colligative properties; Vant Hoff theory of dilute solutions, Vant Hoff factor. Colloidal solutions: Definition, Classification, and Preparation of colloidal solutions; Properties of colloidal state: Tyndall effect, Electrophoresis, Brownian movement; Protective colloids. Thermodynamics and Thermochemistry: First law of thermodynamics, mathematical formulation of the law, Isothermal and adiabatic changes;

Relation between heat capacities at constant pressure and constant volume; Second law of thermodynamics: Carnot cycle and derivation of an expression for efficiency of a reversible engine. Concept and physical significance of Entropy, Gibbs energy and work-function relation; Gibbs energy change and chemical spontaneity. Thermochemistry: Heats of reaction, Hesss Law of constant heat summation. Kinetics and Chemical Equilibrium: Rate of reaction, law of mass action, velocity constant. Reversible reactions and chemical equilibrium, Equilibrium constant. Le Chateliers principle (statement, explanation and its industrial applications). Molecularity and Order of reaction, First and Second order of reactions, Rate law equation and mechanism of reactions. Ionic Equilibria: Modern Ionic theory; Modern concepts on acids and bases; Strength of acids and bases, Ionic product for water, pH scale. Commonion effect and Solubility product, Their applications in qualitative inorganic analysis and indicators. Inorganic Chemistry: Atomic Structure and Chemical Bonding: Electrons, protons and neutrons, their charges and relative masses. The early models of the atom. Rutherfords model, Hydrogen spectra; Failure of Rutherfords model. Bohrs model of hydrogen and hydrogen like atoms; Dual nature of electron, deBroglie equation, Uncertainty principle. Quantum numbers (i.e., quantum numbers and their application to electronic structure of atoms), Concept of atomic orbital, Paulis exclusion principle, and Hunds rule, Aufbau principle. Ionic Bonds: Definition, factors influencing the formation of ionic compounds, Lattice energy of ionic compounds. Covalent Bonds: Nature of covalent bond (Lewis concept), Concept of orbital overlap in bond formation, Sigma and pi bonds, Hybridization of atomic orbital (sp, sp,2 sp3 hybridization), Properties of covalent compounds, Structure of simple molecules such as H2O, NH3, CH4, C2H4, C2H2, PCI5 and SF6. Co-ordinate covalent bonds: Lewis concept, structure of H3O+ and NH4+ ions on the basis of hybridization, Properties of co-ordinate covalent compounds. Metallic bonds: Bonding in metals (elementary treatment only), Insulators, Conductors and Semiconductor, Extrinsic semi-conductors (n-type and p-

35

type). Hydrogen bond: Types of hydrogen bond, Consequences of hydrogen bonding. Periodic Properties of Elements: Mendeleefs periodic table and periodic law; Long form of periodic table, its merits and demerits. General characteristics, Properties of s-block, p-block and dblock elements. Trend of periodic properties of elements such as atomic volume, atomic radii, ionization potential, electron affinity and electronegativity in periodic table (qualitative treatment only). Metallurgy: General principles of extraction of metals, Occurrence of metals, sources of different metals. General method of extraction of metals by pyrometallurgical process and by electrolysis (different principles only). Ferrous metallurgy: Ores of iron, Metallurgy of iron and manufacture of steel. Properties of Cast iron, Wrought iron, Steel; Effects of carbon, silicon, phosphorous, sulphur, manganese on cast iron and steel. Non-ferrous metallurgy: Ores of aluminium and copper, Metallurgy of aluminium and copper; Properties and uses of Lead, Zinc, Tin and Chromium. Alloys: Effects of carbon and other alloying elements on the properties of steel. Composition and uses of the following alloys: Brass, Bronze, German silver, Bell metal, Gun metal, Duralumin, Nanganin, Type metal, Nichrome and Solder. The chemistry of some chemicals: Ammonia, Nitric acid, Sulphuric acid, Hydrochloric acid, Hydrogen and Oxygen. Organic Chemistry: Introduction: Classification and nomenclature of organic compounds. Qualitative detection of Nitrogen, Sulphur and Halogens. Hydrocarbons: Saturated and unsaturated aliphatic hydrocarbons. Preparation and properties with special reference to methane, ethane, ethylene, acetylene. Aromatic hydrocarbons: Preparation and properties of benzene; Structure of benzene. Haloalkanes and Haloarenes: Preparation, properties and uses of haloalkanes and polyhalogen derivatatives such as CHCl3, CHI3, DDT. Compounds with functional groups containing oxygen: General methods of preparation and properties of Alcohols and phenols, Aldehydes and ketones, Carboxylic acid and acid derivatives.

Compounds with functional groups containing nitrogen: Preparation and properties of Nitrocompounds, Amines and Azo-compounds. Industrial Chemistry: Plastics & Polymers: Definition of a polymer; Polymerization (Addition and condensation); Thermoplastic and thermosetting resins; Some commercially important plastics. Rubbers and their vulcanization. Fuels: Definition of fuel, classification of fuels with examples; Calorific value (gross and net). Solid Fuels: Different types of solid fuels, ignition point, Carbonization of coal, Destructive distillation of wood (name of different products only).Liquid fuels: Fractional distillation of crude oil (only names of different fractions, boiling ranges and uses of different fractions); Properties of liquid fuels: Flash point, power point, viscosity, specific gravity carbon residue; Octane and cetane number. Gaseous fuels: Different commercial gaseous fuels with their composition and calorific value; Manufacture of Producer gas and Water gas (principles with physico-chemical reactions only). Water: Hard and soft water, Boiler feed water, Scale formation, Priming and foaming, Caustic embrittlement, Water softening methods, Treatment of water for town supply and sewage disposal. Corrosion and its protection: Definition, Theories of corrosion, Factors affecting rate of corrosion, Rusting of iron, Demerits of corrosion, Prevention of corrosion by various methods. Environmental Pollution: Air and water pollution: causes and remedy. Section-C MATHEMATICS 30 Marks. Algebra: Arithmetic, Geometric and Harmonic Progressions, Permutation and Combination, Binomial expansion for positive index, middle term, greatest term, binomial expansion for general index. Determinants up to third order, their properties and application to solve linear algebraic equations (Cramers rule), concept of a matrix, types of matrices, equality of matrices, operations of addition, scalar multiplication and multiplication of matrices, determinant of a square matrix, transpose, adjoint and inverse of a matrix, consistency and inconsistency of a system of linear equations, solving a system of linear equations in two or three variables using inverse of a matrix.

36

Trigonometry: Inverse trigonometric functions, solution of inverse trigonometric equations. Coordinate Geometry(2D): Points and their coordinates in a plane, distance formula, area of a triangle, condition for the collinearity of three points and section formula, various forms of equations of a line, intersection of lines, angles between two lines, condition of concurrency of three lines distance of a point from a line, pair of lines, circle, tangents and normal to a circle, simple problems on parabola, ellipse and hyperbola. Differential Calculus: Partial derivatives, maxima & minima of single & two variables, tangent and normal, curvature and derivative of arc. Integral Calculus: Integration of rational and irrational functions, integration of transcendental functions, definite integration, area bounded by curves, length of arc and volume of surface revolution. Differential equation: Linear differential equations of first and second order & their applications. Vector Calculus: Gradient, divergence & curl, line integral, surface integral & volume integral. Coordinate Geometry (3D): Points and coordinates on 3-dimensional space, Distance between points, direction cosines, direction ratios, projections, equation to a plane, angle between planes, distance of a point from a plane, angle between lines & planes, condition of co planarity of two lines, shortest distance between two lines, condition for the intersection of two lines. Probability: Problems on probabilities, conditional probability, Byes Theorem, Binomial & Poisson distributions. Section- D BRANCH SUBJECT (70 marks). Note: Applicants should choose only one Branch subject from Sl. No. 1 to 8 appropriate to their academic qualification in 3-year Diploma. 1. AGRICULTURAL ENGINEERING (70 marks). General Engineering Science: Laws of thermodynamics: Zeroth law, first law, second law. Concept of enthalpy, internal energy, entropy and absolute temperature. Properties of pure substances and mixtures, reversibility and irreversibility.

Thermodynamic cycles, Carnot cycle and steam power cycles, otto, disel and dual cycles. Equivalent forces at a point, simplest resultants in two and three dimensions, equations of equilibrium, free body diagrams and reactions. Two dimensional frames and trusses. Principle of virtual work, frication forces. Belt, rope and chain drive and power screws. Centroids, mass centers, second moment and product of inertia of plant area. Velocity, acceleration, rectilinear, curvilinear co-ordinate system and relative motion, particle dynamics, equation of motion. Concept of stress and strain, normal and shearing stresses and stains. Stress-strain diagrams for uniaxial loading. Deformation of axially loaded members, torsion of circular shafts. Stress and deflections in closed coiled helical strings subjects to flexural loads. Reactions for statically determine beams, relationships between load, shearing force and bending moment, shear force and bending moment diagrams. Theory of simple bending stresses, shearing stresses in beams, principal stresses and principal planes, principle strains, principal stresses in 3D, relation between elastic constants, combined torsion and bending, pressure vessels, biaxial, stresses, yield theories, deflection of beams. Properties of fluids: Pressure and its measurement. Hydrostatic forces on surface. Kinematics and dynamics of fluid flow. Dimensional analysis and similitude. Laminar and turbulent flow in pipes, general equation for head loss, energy loss trough pipe fittings. Measurement of distance and areas: Principle and methods of chain surveying, prismatic compass and chain traversing. Theodolite traversing. Plane table surveying including two point and three point problems. Leveling and contouring, measurement of areas and volumes. Engineering properties of granular materials, soil classifications, fundamental definitions and relationships. Determination of index properties of soil. Permeability and seepage analysis. Stress distribution. Shear strength. Mohrs circle of stresses. Compaction. Active and passive earth pressures. Stability analysis of earthen slopes. Farm Power and Machinery: Salient features of various source of farm power used in India, Farm engine, tractors and power tillers, their selection, operation and adjustment. Principles of working and

37

construction of I.C. engine. Engine valves and operating mechanism, fuel and combustion. Different systems of I.C. engine such as fuel, lubrication, cooling, intake, exhaust etc. Study of clutch, brake, gearbox, differential, final drive hydraulic and electrical system of farm tractors. Use of electrical motors as a source of farm power. Scope, need and constraints of mechanization. Types of implements, field capacities, constructional details, design criteria and principals of operations of different types of hand tools. Animal, power tiller and tractor operated primary and secondary tillage implements such as indigenous plough, mould board plough, disk plough, rototillers, harrow, cultivator, subsoilar, leveler etc. Types principles and constructional details of weeder, seed and fertilizer drill, planters, transplanters, sprayer, duster, mower, vertical conveyor reaper, threshers and combine harvesters. Soil and Water Conservation Engineering: Water resources utilization in India. Ground water resources development and utilization, Hydraulics of wells, open well and tube well design and construction. Water lifts and irrigation pumps. Measurement of irrigation water. Water conveyance and its control. Irrigation efficiencies, irrigation scheduling. Design of irrigation channel and seepage analysis. Design of underground pipelines. Soilplant-water relationships. Land grading and field layout for efficient irrigation. Introductory concept of farm irrigation methods: border, check basin, furrow, sprinkler and drip. Drainage: importance, problems, types and requirements in agriculture, drainage coefficient, dynamics of soil-water, measurement of soil permeability, field drainage layout patterns. Hydrology: Hydrologic cycle, precipitation, infiltration, evaporation, runoff and its estimation and measurement. Types and mechanics of wind and water erosions, biological and engineering measures of controlling erosion, gully control and gully control structures. Vegetative waterways and their design, stream bank erosion and its control, design, construction and maintenance of farm ponds. Introduction to watershed management. Post Harvest/Process, Food Engineering and Farm Structures: Engineering properties of biological materials: Rheology of agricultural products. Mixing and mixers. Psychrometry; theory of grain drying, different types of grain dryers and dryer efficiency. Size-reduction and energy

requirement, Kicks law and Rittingers law, roller mill, burr mill and hammer mill. Storage of grains, lateral and vertical pressure relationship. Importance of agricultural processing: process of cleaning, grading and sorting, and related equipments. Material handling equipments. Processing of cereals, pulses, oil seeds. Layout, maintenance and testing of related machinery and plant. By-products utilization; combustion, gasification and other chemical and bio chemical transformations. Properties and classification of building material like bricks, lime, cement, sand, coarse aggregates, timber, asbestos, glass etc. Animal shelters and storage structures in fans. 2. CIVIL ENGINEERING (70 marks). Strength of Materials & Theory of Structures: Normal stress, shearing stress, Normal strain, Hookes Law, Stress-strain behaviour of mild steel, Poissons Ratio, Shearing strain, Torsion of Circular Shaft, Relations among load, Shear and Bending Moment, Shear and Bending-Moment Diagrams, Pure Bending, Bending of Members Made of several Materials, Shearing Stresses in a Beam, Mohrs Circle for Plane Stress, Principal Stresses, Maximum Shearing Stress, Eulers Formula for Pin-Ended Columns and columns with other End conditions. Equation of the Elastic Curve by Double Integration Method, Slope and Deflection of Determinate Beams by Moment-Area Theorems, Deflections and Slope by Energy Methods, Castiglianos Theorem, Stability and Degree of Indeterminacy, Rolling loads and Influence lines for Determinate Beams, Trusses, and Floor Girders, Cables and Three-Hinged Arch. Water Resources Engineering: Hydrology: rainfall, stream flow measurements, runoff, hydrographs, flood studies, reservoir and channel routing, flood forecasting, flood protection measures, river training works, well hydraulics; Irrigation: Command area, duty and delta, canal outlets, crop-water requirement. Fluid Mechanics: Properties of Fluid, Manometry, Forces on Plane and Curved surfaces, Flow classification, Continuity Equation, Momentum Equation, and Energy Equation and their Applications, Orifices, Venturimeter, Weirs and Notches, Laminar and Turbulent Flow through Pipes, Darcy Weisbach Equation, Moody Diagram, Steady

38

Uniform Flow in Open Channels, Mannings Formula. Geotechnical Engineering: Preliminary definitions & relationship, Determination of index properties, classification of soils, soil structure and clay mineralogy, permeability, Darcys law, seepage analysis, compaction, one dimensional consolidation, Terzaghis theory, shear strength, theoretical consideration and tests, shallow and deep foundations, soil exploration. Highway and Railway Engineering: Highway Geometric Design: Cross sectional elements, Sight distances, horizontal and vertical alignments; Types and components of Pavement structures, Design of Flexible Pavements; Traffic Characteristics: Road user and vehicular characteristics, traffic volume studies, O-D studies and traffic capacity studies; Railways: Components, construction and maintenance of rail tracks, points and crossings. Surveying: Contouring, Theodolite and its adjustment, measurement of angles and setting out lines, Trigonometrical leveling, Tacheometry, Curves and different methods of setting out curves, Introduction to electronic Theodolites and Total Stations. Structural Design: Working stress methods of design, singly and doubly reinforced sections, rectangular and Tee beams, shear, torsion and development length, one and two way slabs, short and long column, Design of isolated footings, Introduction of limit state design, Design for flexure, shear and compression, Design of riveted and welded connections, tension and compression members, splicing and lacing, Beam column connection, roof trusses. Environmental Engineering: Estimation of quantity of water, per capita demand, population forecasting, water quality parameters, treatment of water, distribution system, Estimation of quantity of sewage, dry weather flow and storm run off, sewer appurtenances, characteristics of sewage, treatment and disposal of sewage, sludge digestion.

3. COMPUTER SCIENCE AND ENGINEERING (70 marks). Operating System & System Software:

Overview of Operating Systems, Operating Systems Structures, Uses, Types and Functions of Operating Systems. File Systems, File System Implementation. Concept of Process-Process Management, Process Synchronization and Deadlocks, Inter-process Communications, CPU Scheduling. Memory Management Allocation Schemes, Paging Segmentation, Virtual Memory, Demand Paging, Paging Replacement Algorithms. Disk Management Disk Scheduling Algorithms. System Softwares- Functions and Uses of System Software, Assemblers, Loaders, Linkers, Pass Structure of an Assembler, Loading Schemes, Macro and Co-Routines, Macro Processing and Macro Calls, Sub-Routines and Sub-Routine Calls. Digital Electronics & Elements of Logic Design: Various Number Systems and their Implementation, Binary Arithmetic, 1s Complement, 2s Complement, 9s Complements & 10s Complements of a number. Floating Point Numbers, Boolean Algebra and Logic Functions. Different Methods of Minimizing Boolean Functions. Design of Combinatorial Circuits Adders, Multiplexer, Demultiplexer, Decoder, Parity Generator and Checker, Comparator Etc. Switching Algebra, Function Decomposition, Symmetric Function, Contact Networks, Design of Sequential Circuits (Synchronous & Asynchronous) Flip-Flops, Register, Counter Fault Tolerant, Hazard, Stuck-At-Fault, Bridging Fault, StuckOpen-Fault. Microprocessor, Computer Architecture & Organization : 8085 Microprocessor Architecture, Instruction Set, Assembly Language Program, Counters and Delays, Interrupts, Interfacing Data Converters, Programmable Interface Devices : 8155 Multipurpose Programmable Device, 8279 Keyboard/Display Interface, 8254 Interval Timer, 8259 Interrupt Controller, 8237 DMA Controller. CPU Structure and Function, Basic Idea of Hardware And Software, Instruction Sets : Characteristics, Functions and Formats, Addressing Modes; Computer Arithmetic, Control Unit : Microprogram Control, Hardwired Control; Memory : Internal Memory Organization, External Memory (Magnetic Disk, RAID, Optical Memory, Magnetic Disk), Cache Memory and Mapping Procedures; I/O Organization : Interrupts, Programmed I/O, Interrupt-Driven I/O, DMA, I/O

39

Channels, Standard I/O Interfaces; RISC and CISC Processor, Basics of Parallel Processing, Pipelining. Programming Language Concepts : Programming in C And C++, Syntax, Preprocessor Directives, Built-In Data Types, User-Defined Data Types, Operators and Precedence, Loops and Conditional Flow of Control, Enumerated Types, Arrays, Variable Types and Scope of Variables, Global, File and Namespace, Functions, Pass By Value, Pass By Reference, Input and Output Handling, File Handling. Operator and Function Overloading, Single Inheritance, Polymorphism, Virtual Member Functions, Constructor and Destructor, Information Hiding, Encapsulation, Data Members, Member Functions, Public and Private Access. Data Structures: Arrays, Link Lists, Stacks, Queues, Trees, Graphs : Representations, Implementations and their Applications Arithmetic Expression Evaluation, Recursion, Priority Queues, Etc., Graph and Tree Traversals, Basic Search Techniques : Tree Searching: Binary Search Trees, Avl Trees, Etc., Hashing Techniques. Basic Sorting Techniques : Bubble Sort, Insert Sort, Selection Sort, Radix Sort, Tree Indexes : M-Way Search Trees, B-Trees, B+Trees. 4. ELECTRONICS & COMMUNICATION ENGINEERING (70 marks). Electronic Devices and Circuits: Analog Devices and circuits: Physics of Semiconductor Materials & Components, Energy band diagram, Fermilevel, Hall effects. Devices: Diodes, BJT,s FET,s, Thristors, Tunnel diodes, Basics of IC,s and operational amplifiers. Circuits: Biasing circuits of transistors, Design of power supplies using Diodes and transistors-voltage Regulator Circuits Transistor Amplifier (BJT & FET), Power amplifiers, feedback amplifiers, oscillators (qualitative analysis only). Multivibrators, Time base circuits. Regulated Power supply. Time base circuit Saw-tooth voltage and current generators, transistor switches, wave shaping circuit (diode and transistors) Electro-static and magnetic deflection methods, low frequency h-parameter transistor & FET models, Pi models. Digital Devices and Circuits: Number systems: logic gates-Boolean Algebra-Transistor as a switchlogic families-Arithmetic and logic circuits-Counters

and shift registers-A/D and D/A converters, Multiplexer, Demultiplexer, Encoder, Decoder. Microprocessors: Architecture-Assembly language programming of 8085-peripheral devices-Interfacing of memory and devices. Semi Conductor Memories: RAM, ROM, Storage devices, printer, Connectors, floppy drives, Organization of computer, simple programme. Electronic Instrumentation and Measurements: Systems, units and standards of Measurement, AC and DC indicating instruments, AC and DC bridge circuits, Error Analysis of generalized measurement systems, transducers (Strain gauge, LVDT. Thermistor, Thermocouple etc.) Electronic Measuring Instruments, CRO, Digital Ammeter, Millimeter, Voltmeter, Time and Frequency measurements, Signal Generators, Q-meter, Wattmeter, Energy meter. Neteorks-Filters And Microwave Engineering: Network theorems, Single and Two port networks, T-type, II-type ladder type networks. Transmission lines: Characteristics impedances, Attenuators, Equalizers, Basics of wave guides-Transmission line charts. Filters: type, simple design problems, Basics of Electromagnetic theory , Maxwells equations. Basics principles of wave propagation. Fundamentals of Antennas and Radar, Basics of Microwaves, EM Spectrum Principles of microwaves devices and circuits. Communication Engineering: Introduction to signal analysis-Fourier series and Fourier transform. Sampling theorem, Parsevals theorem, convolution, Transmission through linear systems: AM,FM PM, Pulse modulation; PCM: Amplitude limiting in FM, Pre-emphasis, De-emphasis; Noise in AM and FM: Multiplexing-FDM, TDM; ASK, FSK, Block schematic of different transmitters for AM, FM,SSB, ISB systems; Superheterodyne receivers, Mixers, AGC, AFC, spectrum of EM waves; Propagation of EM waves-sky waves- sky wave, ground wave, space wave, skip distance, maximum usable frequency; Antenna fundamentals and Radiation; Communication systems;: Principles of telegraphy, telephony and television broadcasting , Basics of satellite and optical fibre communications: Fundamentals of telematics. 5. ELECTRICAL ENGINEERING (70 marks).

40

Electrical Circuits: Phasors and phasor algebra, balanced and unbalanced poly-phase circuit, Test signals, Star-Delta transformation, Network theorems, Parameters of electromagnetic circuits, resonance in R-L-C Series and Parallel circuits, Network analysis by mesh and node methods. Electrical Engineering Materials: Conducting, Insulating materials and Magnetic materials, Properties and applications Electrical Instruments and Measurements: Principles of measurements: Classification, accuracy and sensitivity, damping and control forces, shunt and multiplier, Measurement of resistance: Low, medium and high. Principle and uses of DC potentiometers, AC Bridges. Indicating instruments: Multimeter, PF meters, synchroscope. Electrical Machines: Classification of D.C. machines: Constructional features, e.m.f., torque, excitations, motor performance, speed, power, size considerations, speed control, efficiency. Transformers: Induced e.m.f., equivalent circuits, regulation, different efficiencies. Three phase induction machines: Torque characteristics, Starting, equivalent Circuits. Three Phase Synchronous Machines: Generation, voltage regulation, parallel operation, synchronous motor, starting and V-curves, Single phase motors: type, starting characteristics. Generation, Transmission and Distribution: Generation: Thermal, Hydel and Nuclear Power Stations, Prime movers and alternators. Transmission: Voltage levels, line conductors, electrical line parameters of short and medium lines, voltage regulation, corona. Distribution: D.C. and A.C. systems, voltage level, types of distribution feeders and distributors, voltage drop and effects, power factor improvement plant. Substation: Different types, site selection, equipments, electrical earthing. Switchgear: Switches, isolators, circuit breakers and their types. Protection: Fault current and protective devices, fuses, relay functions, alternator, Transformer protection, thermal relays, over voltage-causes, effect and protective devices. Electrical Estimation and Costing: Estimation of materials for industrial and residential installations. UPS and small diesel generating-set and accessories. Cost estimation of materials and selection criteria, Design and calculation of the cost

of 400V/230V three phase 4 wire, 100-500 KW overhead line, Tenders. Electrical Power Utilizaion: Design of lighting system. Electrical Heating: Resistance heating, Induction heating, Arc heating and Dielectric heating, types of electric welding Electrochemical process: Principles, equipment and procedure. Electrical Drives: Characteristics of various electric drives, speed control, starting and breaking, mechanical consideration, selection of motors. Power Electronics: Power diodes and Darlington Pair. Thyristor: Principle, thyristor family, firing circuits, applications, Selenium rectifiers, uncontrolled and controlled rectification, Power MOSFETS. Digital Electronics: Digital signals, gates, Boolean algebra, logic families, multiplexures / demultiplexure, Encoders/decoders, flip-flops, registers, counters and applications of logic gates, OPAMPS in timing circuits, A/D and D/A conversion. Computer Programming: Concept of low level and high level languages, Block-diagram, concept of flow chart, and algorithm, Assemblers, Macros, sub-routines, co-routines, loaders, linkers, editors and compilers, programming and file handling in C and C++. 6. MECHANICAL ENGINEERING (70 marks). Engineering Mechanics & Strength Of Materials: Vector concepts, rest and motion, Introduction to force systems (Parallel, Concurrent & Coplanar); Free Body Diagram; Equilibrium principle; Static analysis of systems; Friction and impending motion; rolling and sliding of cylinders; Newtons law of motion and derived concepts. Centroid; Area & mass moment of inertia. WorkEnergy principle; Impulse; Collision of two bodies; Plane motion of particles and applications; Static analysis of simple structures; Method of joints and method of sections. Virtual work; combined motion of rotation and translation; Transmission of power by belt and gear drives. Stress & strain; Shear stresses, Principal stress and strain, Mohrs circle for stress and strain analysis, Beams & columns; Shear force and bending moment diagram. Theories of Failures; Columns, Struts; Stress & strain analysis of shafts under torsion, analysis of springs.

41

Engineering Materials: Mechanical, thermal, chemical properties, structure of materials, alloys. Iron and its alloys, Iron carbon phase diagrams, steel and their important alloys of iron, heat treatment processes, Elastic & plastic behaviors; Plastic deformation. Effect of various alloying elements on mechanical properties of Iron: Bearing alloys; Powder metallurgy; Ficks law. Commonly used engineering materials for tools, engineering components and household objects. Design of Machine Element: Concept of FOS, material selection, engineering materials, Design of Rivets, Screws, Bolts with detail analysis. Cotter and Knuckle joints, shafts, keys and couplings, Springs helical and leaf types. Hydraulics and Hydraulic Machines: Properties of liquid, hydraulic pressure and its measurement, Forces on immersed bodies; Center of pressure; Buoyancy stability of immersed and floating bodies; Flow of liquids: 1-D, 2-D, & 3-D flows; steady, unsteady, laminar and turbulent flows; continuity equation, momentum equation, and energy equation and their applications, Euler equation and Bernoullis equation; Orifice, mouth piece and nozzles, flow through pipes and piping systems, losses in piping systems; fundamentals of channel flow, hydraulic jump; flow measurements : Dimensional analysis and associated theorems. Non dimensional numbers and their significances; Stream function and velocity potential function; streamline, streakline and pathline; Rotational and irrotational flow, circulation and vorticity; Free and forced vortex; Basic flows like rectilinear, source, sink, doublet etc. Different types of pump, reciprocating and rotary pumps, operation and maintenances of pumps, Cavitation and NPSH; Characteristic curves of pumps, losses and efficiencies of pumps. Compressors, blowers and fans. Different types of turbines, Francis, Kaplan and Pelton turbines, operation and maintenance of turbines; characteristic curves, work done and efficiency of turbine, specific speed and selection of pumps and turbines. Hydraulic machinery like hydraulic ram, hydraulic coupling and torque converter, hydraulic jack, screw pump, Gear pump, Vane pump etc. Thermal Engineering: Basic thermodynamic concepts; System and surrounding; Thermodynamic

Properties; Intensive and Extensive properties; Point and path functions; Zeroth law, first and second laws of thermodynamics and associated corollaries; Concepts of absolute temperature, internal energy, enthalpy &entropy; Clausius inequality, concept of availability, Maxwells relations. Application of thermodynamic laws, reversibility & irreversibility , internal & external irreversibility; Pure substances and mixtures. Thermodynamic cycles: Carnot cycle, Rankine cycle, Joule-Brayton cycle ; Air standard cycles; Otto cycle and Diesel cycles. Ideal gas compression and compressors, jet propulsion, gas compressors, stream generators, Fuel and combustion, I.C. engine, calculation of efficiencies, testing of IC. Engines; Open and closed gas turbine cycles, introduction to heat and mass transfer; heat exchanger; LMTD and NTU methods. Principles of refrigeration, air refrigeration system, Vapor compression refrigeration system, refrigeration cycles, use of TS & P-H charts for refrigeration, refrigerants and their properties, vapor absorption system, psychometric properties and charts. Types of power plants; components of steam power plant; hydro-electric power plant, nuclear power plants, diesel power plant. Elementary solar and geothermal power systems. Theory of Machines: Kinematics and kinetics; mechanisms and structure; inversions; kinematic chains; different types of mechanisms; degree of freedom & its determination; Grashofs criteria; velocity analysis; acceleration analysis; gear trains; balancing of rotating masses; brakes & dynamometer. Production and Industrial Engineering: Fundamentals of metal cutting, tool geometry, Calculations of cutting forces and tool life; General purpose machine tool and their operations, various welding techniques like arc, gas, resistance etc. Metal forming methods like rolling, drawing, extrusion, press working, powder metallurgy, heat treatment of metals, Introduction to NC and CNC machines, basics of measuring instruments, study of transducers, static and dynamic characteristic of instruments, Introduction to metrology: Limits, fits and tolerance, Mechanical and optical comparators; Measuring instruments of angles; measurements of surface roughness and thread profiles, calibration of various measuring instruments.

42

Production planning; Inventory control; material and wage calculation; elements of cost; network analysis; work study and estimating machining

time; break even analysis; TQM & ISO 9000; Shop floor management; Machines & Industrial safety.

--------------------------------------------------------------------------------------------------------------------------------------

ANNEXURE I AFFIDAVIT BY THE STUDENT

I, _______(full name of student with Application number / NEE Roll number) s/o d/o Mr./Mrs./Ms. ______________________________________, having been admitted to ______________ ___(name of the institution)_______________ , have received a copy of the UGC Regulations on Curbing the Menace of Ragging in Higher Educational Institutions, 2009, (hereinafter called the Regulations) carefully read and fully understood the provisions contained in the said Regulations. 2) I have, in particular, perused clause 3 of the Regulations and am aware as to what constitutes ragging. 3) I have also, in particular, perused clause 7 and clause 9.1 of the Regulations and am fully aware of the penal and administrative action that is liable to be taken against me in case I am found guilty of or abetting ragging, actively or passively, or being part of a conspiracy to promote ragging. 4) I hereby solemnly aver and undertake that a) I will not indulge in any behaviour or act that may be constituted as ragging under clause 3 of the Regulations. b) I will not participate in or abet or propagate through any act of commission or omission that may be constituted as ragging under clause 3 of the Regulations. 5) I hereby affirm that, if found guilty of ragging, I am liable for punishment according to clause 9.1 of the Regulations, without prejudice to any other criminal action that may be taken against me under any law for the time being in force. 6) I hereby declare that I have not been expelled or debarred from admission in any institution in the country on account of being found guilty of, abetting or being part of a conspiracy to promote, ragging; and further affirm that, in case the declaration is found to be untrue, I am aware that my admission is liable to be cancelled. Declared this ____ day of ___________ month of _______ year. __________________ Signature of deponent Name: VERIFICATION Verified that the contents of this affidavit are true to the best of my knowledge and no part of the affidavit is false and nothing has been concealed and misstated therein.

43

Verified at ___(place)__ on this the ___ (day) __ of ____(month)__, ___ (year)___ _________________ Signature of deponent Solemnly affirmed and signed in my presence on this the ___ (day) of ___(month)__, ___(year)___ after reading the contents of this affidavit. OATH COMMISSIONER.

ANNEXURE II AFFIDAVIT BY PARENT/GUARDIAN

I, Mr./Mrs./Ms. _______________________ (full name of parent/guardian) father/mother/guardian of __________________________ (full name of student with Application number/NEE Roll number) having been admitted to ___________________ (name of Institution), have received a copy of the UGC Regulations on Curbing the Menace of Ragging in Higher Educational Institutions, 2009, (hereinafter called Regulations), carefully read and fully understood the provisions contained in the said Regulations. 2) I have in particular perused clause 3 of the Regulations and am aware as to what constitutes ragging. 3) I have also in particular perused clause 7 and clause 9.1 of the Regulations and am fully aware of the penal and administrative action that is liable to be taken against my ward in case he/she is found guilty of or abetting ragging, actively or passively, or being part of a conspiracy to promote ragging. 4) I hereby solemnly aver and undertake that a) My ward will not indulge in any behaviour or act that may be constituted as ragging under clause 3 of the Regulations, b) My ward will not participate in or abet or propagate through any act of commission or omission that may be constituted as ragging under clause 3 of the Regulations. 5) I hereby affirm that, if found guilty of ragging, my ward is liable for punishment according to clause 9.1 of the Regulations, without prejudice to any other criminal action that may be taken against my ward under any penal law or any law for the time being in force. 6) I hereby declare that my ward has not been expelled or debarred from admission in any institution in the country on account of being found guilty of, abetting or being part of conspiracy to promote, ragging; and further affirm that, in case the declaration is found to be untrue, the admission of my ward is liable to be cancelled. Declared this _____ day of _______ month of _____ year. ________________________ Signature of deponent Name : Address: Telephone/Mobile No:

44

VERIFICATION Verified that the contents of this affidavit are true to the best of my knowledge and no part of the affidavit is false and nothing has been concealed or misstated therein. Verified at __(Place)__ on this the __(day) of (month) , (year)_ . -------------------------------Signature of deponent Solemnly affirmed and signed in my presence on this the __(day)_ of _(month)_ , _ (year)_ after reading the contents of this affidavit.
OATH COMMISSIONER.

APPENDIX - III
Branch in which admission is admissible
Agrilcultural Engineering Civil Engineering Agriculture Engineering; Engineering

Allied Branches

Agriculture Engineering & Farm Machinery;

Agriculture Farm

Civil Engineering; Civil Engineering (Draftsmanship); Civil Engineering (Construction Technology); Construction Technology; Building Construction; Public Health Engineering; Civil Engineering (Public Health Engineering); Water Resource Engineering; Civil Engineering (Management of Water Resources); Transportation Engineering; Rural Technology; Civil & Rural Engineering; Rural Engineering; Civil & Rural Technology Computer Technology; Computer Science; Computer Engineering ; Computer Sc. & Engineering; Computer Sc. & Technology; Computer Hardware Maintenance; Computer Science & Hardware Engineering; Special Diploma in Electronics (Computer); Information Technology

Computer Science & Engineering

45

Electronics & Communication Engineering

Applied Electronics; Industrial Electronics; Special Diploma in Electronics (Industrial Electronics); Electronics Engineering; Electronics (Consumer); Electronic Equipment & Trouble Shooting; Consumer Electronics; Electronics & Micro processors; Microprocessors; Microprocessors & Micro-based System; Electronics Communication System; Electronics Fiber Optics; Electronics Communication; Electronics & Electrical Communication; Special Diploma in Electronics (Communication) Telecommunication; Electronics & Communication Engineering; Telecommunication (Electronics & Telecommunication); Telecommunication Engg.; Telecommunication (Sound & Television); Electronics & Radio Engineering; Electronics & Radio Technology; Electronics, Television & Sound Engineering; Sound & Television Engg; Television & Video Engineering System; Audio & Video Engg,, Electronics & Instrumentation, Electrical and Electronics Engineering, Instrumentation Engineering, Electronics & Telecommunication Engineering, Control & Instrumentation Electrical Engineering; Electrical Engineering & Electronics Control; Electrical Engineering with Industrial Control; Electrical Power System, Electrical & Electronics Engineering, Electrical Power or Power Control, Electrical & Electronics Control Engg., Electrical Power Engg., Electrical Instrumentation, Control & Instrumentation, Power Electronics Mechanical Engineering (Maintenance); Mechanical Engineering (SW); Fabrication Technology; Fabrication Engineering; Mechanical Engineering (Sheet Metal & Welding); Mechanical Engineering (Maintenance Engineering); Machine Tool Maintenance & Repair; Mechanical Engineering (Instrumentation), (Mechanical Engineering), (Tube Well Engineering); Thermal Engineering; Mechanical Engineering (Heat Power Engineering); Robotics; Mechanical Engineering (Design, Drawing & General); Mechanical Engineering (Machine Design & Drafting); Mechanical & Rural Engineering, Automobile Engg., Manufacturing Engg., Welding Technology, Foundry/Forging Technology, Maintenance & Plant Engg., Industrial & Production Engg.

Electrical Engineering

Mechanical Engineering

_________________________________________________________________________________________

46