1)most common type of stern used ....

a)counter stern b)elliptical stern c)transom stern d)none of the above 2)as per condition assignment, some means of permanent closure, either attached or closed by, is required for an ventilators except those a)3.5m,2.3m b)3.5m,2.0m c)4.0m,2.0m d)4.5m,2.3m 3)velocity of advancement is defined as a)velocity of ship b)axial velocity of propeller with respect to adjacent water flow c)velocity of ship in adverse condition d)axial velocity of propeller with respect to fixed object 4)upper plating of the lower stool on which the lower end of a transverse corrugated bulkhead is welded known as a)shedder plate b)tank top c)margin plate d)self plate 5)ballast carried in wing tank and topside tank in bulk and ore carriers aid in making the ship.....a)less stiff b)less tender c)ressiet rolling d)resist pitching 6)as per loadline, exposed super structure deck outside one quarter of ships length from frwd prpendicular is known as.... a)forward deck b)position 1 c)position 2 d)position 3 7)as per load line rule position2 means a) exposed freeboard,superstructure and raised quarter within one quarter of ships length from the forward perpendicular b) exposed freeboard,superstructure and raised quarter within two quarter of ships length from the forward perpendicular a) exposed freeboard,superstructure and raised quarter outside one quarter of ships length from the forward perpendicular a) exposed freeboard,superstructure and raised quarter outside one quarter of ships length from the forward perpendicular 8)in longitudinal corrugated bULKHEAD corrugation are a)either horiz or vertical b)only horizontal c)only vertical d)neither horizontal nor vertical Plating on bulkheads are generally fitted ____________ for better graduation of thickness. A. Vertically in all bulkheads B. Horizontally in all bulkheads

C. Vertically in transverse bulkheads only D. Horizontally in transverse bulkheads only 10. Position of center of buoyancy of a box shaped barge is at A. Half of the draught; B. Half of the depth of the hull C. All of the above D. None of the above;

11. Better freeing arrangements on tanker decks inform of open rails for 50% of length are provided: A. To ensure no seawater gets into the tanks. B. Because tankers have less freeboard. C. Both A and B D. None of the above

12. As per conditions of assignments, the machinery space openings are to have ________________ doors with minimum sill heights of __________ in position2. A. Weathertight, 450 mm B. Watertight, 380 mm C. Weathertight, 380 mm D. Watertight, 450 mm

13. Relation between CB, CP and CM is A. C_P= C_B* C_M; B. C_M= C_P* C_B; C. C_M* C_P* C_B=1; D. C_B= C_P* C_M;

14.Which of the following statements is False? A. A collision bulkhead must be fitted on all types of ships. B. An after peak bulkhead must be fitted on all types of ships. C. One bulkhead at each end of machinery spaces must be fitted on all types of ships. D. The aft peak bulkhead must extend to the upper deck

15. Shedder plates are sometimes provided between, the corrugated bulkheads and lower stool shelf plates. The purpose of shedder plates is to: A. Provide strength to the shelf plate B. Reduce the unsupported span of corrugated bulkhead C. Prevent piling up of dry cargo on horizontal portions of lower stool shelf plates D. Reduce stress concentration at the connections of corrugated bulkheads to the lower stool shelf plates

16. Sheer Lines of a vessel is defined as A. Lines of horizontal sections along the longitudinal axis; B. Lines of vertical sections along the longitudinal axis; C. Lines of vertical sections at various stations; D. Lines of horizontal sections at various drafts;

17. Lighter longitudinal stiffening frames on the vessel's side plating are called __________. A) stringers B) side frames C) side stiffeners D) intercostals

18. What is the purpose of cant frames in steel vessels? A) To support the overhang of the stern B) To provide strength to shell plating at the stern C) To add strength to the deck beams which support the weather decks D) To support the plating of a cylindrical tank

19. In a transversely framed ship, the transverse frames are supported by all of the following EXCEPT __________. A) girders B) longitudinals C) side stringers D) web plates 20. In a longitudinally-framed ship, the longitudinal frames are held in place and supported by athwartship members called __________. A) floors

B) margin plates C) stringers D) web frames 21. When the longitudinal strength members of a vessel are continuous and closely spaced, the vessel is __________. A) transversely framed B) longitudinally framed C) intermittently framed D) web framed 22. A vessel having continuous closely spaced transverse strength members is __________. A) longitudinally framed B) transversely framed C) cellular framed D) web framed 23. In ship construction, frame spacing is __________. A) greater at the bow and stern B) reduced at the bow and stern C) uniform over the length of the vessel D) uniform over the length of the vessel, with the exception of the machinery spaces, where it is reduced due to increased stresses 24. The lower and the upper stools are provided for bulk carriers: A. with plate type of transverse watertight bulkheads and they normally extend athwartship from ship side to ship side B. with corrugated type of transverse watertight bulkheads and they normally extend athwartship from ship side to ship side C. with plate type of transverse watertight bulkheads and they normally extend athwartship from one side lower hopper to other side lower hopper D. with corrugated type of transverse watertight bulkheads and they normally extend athwartship from one side lower hopper to other side lower hopper

25. Define the relation between Permeability, Relative Density and Stowage Factor of cargo A.?? = 1 - (SF * RD); B.?? = 1 - 1 ?? (SF * RD);

C.?? = (SF * RD) - 1; D.?? = (SF * RD) 26. _______ Transverse Watertight Cargo Hold Bulkhead____________ Type of Collision Bulkhead. ( Corrugated & Plate, Swashed & Corrugated, Swashed & plate, Plate & Swashed?

27. peak tank testing.. a)hose test b)by filling them upto load water line c)by filling them with water up to max head which can come on them in practice or 2.44m above tank crown whichever is higher

28. kg of ship increases with... a) adding weight above on present kg b)balasting db tank c)moving weight in transverse direction d)moving weight in frwd direction 29. the gm of the ship will change with.. a)shifting of weight longitudinally b)shifting of weight transverselly c)shifting of weight vertically d)all of the above

30. There are certain requirements which must be met to ensure the water-tightness / weather-tightness of openings and the ability of the ship to rapidly free itself of water on its decks. These requirements required by loadline rules are known as A. Minimum freeboard requirements B. Conditions of requirements C. Minimum loadline requirements D. Conditions of assignments 31. Modern medium size single size skin bulk carrier are provided with _____ framing within double bottom, __________ framing within hopper tanks _________ framing on the side shell within the cargo hold a. L,L,L b. T,T,L c. L,T,L

d. L,L,T 32. Relation ship between CR, CD,CM is a. C-p=c-B*C-M b. C-M=c-p*c-B c. C-m*c-p*c-B=1 d. C-B=c-p*c-M 33. As per conditions of assignments, the minimum height of air pipe openings must be ________ on the freeboard deck A. 380 mm B. 450 mm C. 600 mm D. 760 mm 34. TPC not constant for ships like structure along the draft. a. Length between the perpendicular changes as draft changes b. AWP of water plane varies along the draft of the ship c. TPC remains constant for ships like structure d. Draft for any floating structure does not influence the values of TPC 35. Find which is true? a. A transom floor need not have same depth as cellular DB b. Counter or elliptical sterns are most commonly used in merchant ships c. Cant framing when omitted in a cursors stern and replaced by a flat plate, forms the transom stern d. Cant framing radiating out like spooks of wheel from transom , forms the transom 36. Minimum possible no. of watertight bulkheads in ships with machinery space amidships is a) 4 b) 3 c) 2 d) 5 37. Horizontal web plates which support the part of stern formed by radiused plates, between deck, is known as a) panting stringer b) breast stringer c) breast hook d) breast stiffener

38. Minimum no. of intercoastal girder in transversely framed double bottom of ship whose breadth is more than 10m but less than 20m. a) 1 b) 2 c) 3 d) 4

39. Modern medium to large size single side skin bulk carriers have long framing within double bottoms, within hopper tanks & decks while side shell is transversely framed. Why? Ans: This is required for transverse strength. (I chose this option)

40. The usual depth of a beam bracket is __________. A) 2 1/2 times the depth of the beam B) 5 times the depth of the beam C) 10 times the depth of the beam D) same depth as the beam 41. A deck beam does NOT __________. A) act as a beam to support vertical deck loads B) lessen the longitudinal stiffness of the vessel C) act as a tie to keep the sides of the ship in place D) act as a web to prevent plate wrinkling due to twisting action on the vessel 42. The deck beam brackets of a transversely framed vessel resist __________. A) hogging stresses B) sagging stresses C) racking stresses D) shearing stresses 43. Beams are cambered to __________. A) increase their strength B) provide drainage from the decks C) relieve deck stress D) All of the above 44. Which term refers to a transverse curvature of the deck? A) Deadrise

B) Camber C) Freeboard D) Flare 45. Formula for TPC in brakish water ??? Aw*ro/100

46. Which part of propellor is visible to u from aft a. leading edge, b, trailing edge, c. face , d. boss , e. Tail

47. The effects of free surface on initial stability depend upon the dimensions of the surface of the free liquids and the __________. A) volume of liquid in the tank B) volume of displacement of the vessel C) location of the tank in the vessel D) height of the center of gravity of the vessel 48. block coefficient of crude oil carrier is between 1)b/w 0.7-.75 2).75 to .85 3).9-.95 4)1-1.05

49. GM of ship will change with a) Shifting of weight longitudinally b) Shifting of weight transversely c) Shifting of weight vertically d) All of the above 50 Breadth AP, 1, 2, 3, 4, FP and Coordinates 1, 1 44, 1 55, 1 33, 0 8 , 0 2 LBP is 14 then Find TPC? 0 2, 0.3, 0.5, 0.6 t/cm ? Ref book

51. hw much is fresh water allowance????? a)5tpc b)10tpc c)20tpc d)40tpc

52. What is bulk carrier ? a) single deck, upper lower hopper b) single deck upper lower stool c) multideck crane grab d) multideck hatchcover crane 53. 5 years dry dockingone Dry docking can be missed if a) ABS is given all the necessary informations about the ship b) ship less than 15 years old c) fire on ship d) good quality resistant paint in underwater hull

54. cyclic up and down movement of a vessel along the vertical axis.... a)heaving b.swaying c.yawing d.pitching 55. maximum transverse spacing in double bottom space.... a)2.5m b)3m c)3.7m d)3.8m

56. when a weight is moved transversely in ship the ship will.... a)trim b)heel C)list d)loll 57. in ship con beam bracket are are triangular plate joining the deck beam to a..... a)blkhead b)frame c)stanchion d)deck longitudinal 58. a section of standard weight seamless stel pipe has an external diameter of 4.0 inches .when the pipe is bent into 90 degree turn ,the length of the outside edge of the curve A-B will exceed the length of the inside edge curve C-D by........... a)1.05 inch b)1.25 inch c)2.67 inch d)6.28 inch Uscg gen 5000. 59. a vessel departed from point A at 1206 with a counter reading of 606729 and arrived at point B with a counter reading of 731929 at 1148 the following day the vessel is equipped with 20 foot 8inch dia propeller with a pitch of 20 feet. the observed distance at 404.16 miles was covered at an observed speed of 16.85 knots.what should be the apparant slip for this trip? a)0.0104 b)0.0129 c)-0.0665 d)-0.1104 Uscg gen 1029.

60. Rise of floor Purpose? RISE OF FLOOR is the rise of the bottom shell plating above the horizontal base line, measured at the ship's side. The object is to provide for the drainage of liquids to the ship's centrelie. A. Drainage of water to the ships center line

61. Why TPC is not same for all drafts?... Waterplane Area is not same for all drafts!

62. Extra Strengthening done where... for pounding region+ 40 % of mid ship! 63 Engine room transverse framingEvery frame, alternate etc!

64. Taylor Wake fraction is; Vs ship speed; Va velocity of advancement; P pitch of propeller, N revolution per second A. w= (V_s- V_a)/V_s B. w= (V_s- V_a)/V_a ; C. w= (PN- V_s)/PN; D. w= (PN- V_a)/PN; 65. Wetted Surface Area Formula C L (BD) ^ 0.5 Denny: 1.7 Ld + (inv. Del/d) Taylor: C (del. L) ^ 0.5 66 Summer load line Displacement= 15,000 t, TPC= 26 2,ships mean draft= 6 2 m Ship is going in Winter Regionwhat is the New Displacement? 67 Hatch Coaming Minimum height600, 800, 1000, 1100 mm?

68. Q1Table 1 Station : AP, 1 , 2 , 3 , 4 , 5 , FP ?? Breadths : 2.5 , 4.73 , 5.88 , 6.0 , 5.09 , 3.11 , 0.0 Table 2 Station : AP , -1 , -2 , -3 , ?? Breadths 2.5 , 1.88 , 1.25, 0.63 The tables 1 and 2 of a vessel are ?? breadths of water plane between perpendiculars and appendage respectively. The lengths between perpendiculars and appendages are 60m and 7.5m respectively. Find the LCF of the water plane from mid ship. A. 4.87 m towards ford B. 4.23 m towards ford C. Midship D. 4.04 m towards aft 69. A box barge length =35, B=7m, d=3m, in brackish water of density=1.012t/m3 , the length of mid ship compartment is 10m and full depth. the compartment is bilged, find new draft ? a. 4.2, b. 4.4, c. 4.3, d. 4.1

70. Transverse areas at different stations are given as follows: AP, 1, 3 , 4 , FP 3.4 m2, 4.1 m2 , 5.8 m2 , 2.8 m2 , 1.4 m2 interval is 24m. Find the Displacement of vessel A. 360.1 tonnes B. 345.2 tonnes C. 382.8 tonnes D. 350.0 tonnes 71. Summer load line Displacement= 15,000 t, TPC= 26 2,ships mean draft= 6 2 m Ship is going in Winter Regionwhat is the New Displacement? A. 14655.1 T Done. Refer book 72. Transverse areas at different stations are given as followes AP ,1,3,4,FP 2.4,3.1,4.8,1.8,0.8 (all in m^2) length of the vessel is 18 m find the center of buoyancy from AP of the vessel.

a)7.15m b)7.25m c)7.45m d) 7.75 m A: 6.63 ~ 7.75 73. the bleeder plug or docking plug located on a motor vessel double bottom tank is used to 1 indicate when the tank is pressed up 2 provide a secondary means of tank sounding 3 vent air from the tank when bunkering. 4 empty the tank when in dry dock 74. vertical support member used to strengthen bulkheads are called a stiffner b panels c brackets d stanchions 75. the welded joint located between two plates in the same strake of a hull plating is called as 1 butt 2 lap 3 scarf 4 brackets 76. as per the condition of assignment of port holes. no of porholes are allowed to be fitted below_______% of theships_________or__________mm. a)1,length,300mm b)3.5,depth,6oomm c)2.5,breadth,500mm d)4,summer draft,760mm 77. Hull model relation is based a) Reynolds no of both hull and model are equal. b) Frauds no of both hull and model are equal c) Reynolds and Fraud no of both hull and model are equal d) None 78. Thrust model relation is based on frauds number

79. The mass of a ship without cargo, fuel, stores, water, crew etc that a ship carries is known as: A. Deadweight B. Lightweight C. Displacement D. Tonnage 80. 2 Pitch of the propellerDefinition? Distance moved in 360 Degree Rotation in a Soft Solid Fluid 81. Most Efficient Pre-Painting Methods a) Pickling b) Blast cleaning c) flame Cleaning d) Wire Brushing 82. In a shell expansion plan, plate D5 refers to: A. Fourth plate from aft and fifth strake from keel B. Fifth plate from aft and fourth strake from the keel C. Fourth plate from forward and fifth strake from keel D. Fifth plate from forward and fourth strake from keel 83. In a shell expansion plan, plate D5 refers to: A.7, Plate Type B.5, Corrugated Type C.7, Corrugated Type D.5, Box type 84. What is it seen when a Propeller is seen from the Aft end? a. Leading edge b. Trailing Edge c. bow d. tail 85. Location of Collision Bulkhead? 5-8 % Length of the Ship 86. Why the frictional resistance increases when the draft increases? A. Dead weight of the vessel increases. B. Length of water plane increases.

C. Wetted surface increases. D. Temperature of water reduces as draft increases. 87. Definition Of DISPLACEMENT of Ship Mass of the Displaced Volume of Water The mass of the ship and everything it contains. A ship has different values of displacement at different draught. 88. IDEAL Location of AIR PIPE a. At the Lowest Point Of the Tank b. At the Filling Connection c. At the Highest Point of the Tank d. Opposite to the Filling Connection 89. panting arrangement 15% 90. pounding arrangement 25% 91. Main Purpose Of Bulbous Bow a) To Decrease the Specific Fuel Consumption! b) Increase buoyancy fwd and hence reduce the pitching of the ship to small amount c)increase the velocity of the ship Reeds 78 92. What is The Effect on RESERVE BUOYANCY when the ship is in Fresh Water (for same Displacement) a. Increases b. Decreases c. Remains same 93. Breadth AP, 1, 2, 3, 4, FP and Coordinates 1, 1 44, 1 55, 1 33, 0 8 , 0 2 LBP is 14 then Find TPC? a. 0.2 b. 0.3 c. 0.5 d. 0.6 t/cm 94. Find CWP and TPC of a vessel whose ?? breadths of the water plane as follows: Station: AP 1 2 3 4 FP ?? Breadths (M) 1.0 1.44 1.55 1.33 0.89 0.2 Length between perpendiculars is 14 meters.

Consider the nearest value. a. 0.56 b. 0.65 c. 0.34 d. 0.43 t/ cm 95. Thickness of strakes of bottom plating is increased in which of the following regions of the ship? A. Pounding region B. Over 40% of ship???s length amidships C. Over 40% of ships length forward D. Both A and B 97. How to support Stem Bar to radiused Plate? A. Breasthook 98. Stem bar to Keel Plate a. Oxter b. coffin c. Shoe d. Stealer plates 99. Stern frame to keel plate Ans: Coffin plate 100. Transverse frames are more widely spaced on a ship that is designed with the __________. A) centerline system of framing B) isometric system of framing C) longitudinal system of framing D) transverse system of framing 101. Longitudinally framed double bottom, in frame spaces where there are no solid floors the bracket on the sides & center of girder should not be more than _____ apart a) 2.5m b) 3.7m c) 3.8m d) 1.25m Reeds 44

101 A. In longitudinally framed double bottoms, the maximum spacing between solid floors should not exceed ______________ in any region. A. 2.5m B. 3.0m C. 3.7m D. 3.8m 101B. In transversely framed double bottoms, the maximum spacing between solid floors should not exceed ______________ in any region. A. 2.5m B. 3.0m C. 3.7m D. 3.8m 102. Transverse Framinghow3wweeeeeee support is given in Engine Room, or Pounding Region Alternate Framing or Every Framingfill in the blanks 166 DJ Eyeres 103. Transverse Framing is supported by Girder and Bracket to ship side, unsupported Ans ~ solid plate floors and bracket floors side grider and bracket

104. Which of the following must be provided in a shaft tunnel? A. A watertight door at the engine room bulkhead. B. Escape trunk at the aft end. C. A tunnel well for drainage D. All of the above 105. by using which of the tank we can change the draft but not changing trim of the ship a]peak tank, b]DB tank, c) deep tank, d) top side tk

106. water survey is done on __________ a)5th anniversary b)4th c)3rd d)2nd 107. SECTION 1 : AP,1,2,3,FP are 2.5,1.55,1.75,1.45,0 SECTION 2 : AP,-1,-2,-3 are 2.5,1.85,1.6 LBP=50 appendages = 60 Find LCF 108. Transverse areas at different stations are given as follows: AP 1 3 4 FP 2.4 m2 3.1 m2 4.8 m2 1.8 m2 0.8 m2 Length of the vessel is 18m. Find the Center of buoyance from AP of vessel. A. 7.15 m; B. 7.25m; C. 7.45 m; D. 7.75 m; 10 Find Cw and TPC ifBreadth AP,1,2,3,4,FP and Coordinates 0 , 1 5, 2 1, 1.6, 0 , 0 1 and LBP is 15! Ans. 0.56, 0.65, 0.34, 0.43 t/ cm Sol: 0.38 when worked out. Ref book 110. At all angles of inclination the meta centre is located a] Vertically above centre of buoyancy b] Vertically above centre of centre c] At the intersection of the upright vertical centreline and the line of action of the buoyant force d] Geometric centre of underwater volume 111. The "margin plate" is the __________. A) outboard strake of plating on each side of an inner bottom B) outer strake of plating on each side of the main deck of a vessel C) plate which sits atop the center vertical keel D) uppermost continuous strake of plating on the shell of a vessel 112. Every U.S. crude oil tankship with a keel laying date on or after 1/1/75, shall be equipped with an inert gas system if the tonnage is more than __________.

a. 100,000 DWT (long tons) b. 100,000 DWT (metric tons) c. 50,000 DWT (long tons) d. 50,000 DWT (metric tons) 113. resource zone not security zone a. Inland water, b. territorial area, c. contigous zone, d. continental zone 114. When displacement increases, the free surface moments of slack tanks __________. A) increase B) decrease C) are inversely proportional D) remain unchanged 115. The pillar shape that gives the greatest strength for the least weight is the __________. A) octagonal pillar B) "H" Beam pillar C) "I" Beam pillar D) circular type pillar 116. The existence of liquids in partially full tanks or compartments of a Ship causes a virtual rise in the height of the _______________. (a) metacenter (b) center of buoyancy (c) center of flotation (d) center of gravity 117. the ship`s model estimates the a] hull frictional resistance b]hull wave making resistance, c]all of the above d]none of the above 118. The effects of free surface on initial stability depend upon the dimensions of the surface of the free liquids and the __________. A) volume of liquid in the tank

B) volume of displacement of the vessel C) location of the tank in the vessel D) height of the center of gravity of the vessel 119. The validity of which of the following certificates is not 5 years? A. Safety equipment certificate B. Load line certificate C. Tonnage certificate D. Safety radio telegraphy certificate

121. If a vessel rolls to the starboard side, and there are no movable or moving weights onboard, the center of gravity will ____________. (A) move to port (B) move to starboard (C) move directly down (D) stay in the same position 122. 3.The average of the observed drafts is known as ____________. (A) mean draft (B) true mean draft (C) mean of the calculated drafts (D) draft at the center of flotation 123. 4.The vertical distance between "G" and "M" of a vessel is used as a measure of __________. (A) stability at all angles of inclination (B) initial stability (C) stability at angles less than the limit of positive stability (D) stability at angle less than the downflooding angle 124. 5."GM" cannot be used as an indicator of stability at all angles of inclination because ______________. (a) "M" is not fixed at large angles (b) there is no "M" at large angles (c) "G" is not fixed at large angles (d) there is no "G" at large angles 125. For Vessel's operating under the Indian flag, the construction portfolio must contain _____________.

A. detailed construction plans B. chemical and physical properties of Classification Society approved steels C. approved welding procedures and welding test procedures D. loading conditions and limitations 126. On a Vessel, the deck stringer is the outboard most deck ________________. (A) plating (B) beam (C) stiffener (D) stanchion 127. According to SOLAS, a bulkhead capable of preventing the passage of smoke and flame for one hour would be classified as a/an ____________. (A) A-60 (B) B-60 (C) C-60 (D) D-60 128. .A load line for an Indian Ship is assigned by the ______________. (a) Mercantile Marine Department (b) Ministry of Shipping (c) Directorate General of Shipping (d) Not necessary a member of IACS 129. The maximum draft to which a vessel can legally be submerged is indicated by the _____________. (a) Load Line mark (b) Certificate of Inspection (c) Plimsoll line (d) Tonnage mark 130. When flooding occurs in a damaged vessel, reserve buoyancy ______________. (A) decreases (B) remains the same (C) increases (D) shifts to the low side 131. You can generally improve the vessel's stability in a hazardous situation by _______________. (A) pumping double bottoms to the forepeak

(B) ballasting deep tanks (C) transferring ballast athwartships (D) deballasting double bottoms 132. Reserve buoyancy is the _____________. (A) unoccupied space below the waterline (B) volume of intact space above the waterline (C) excess of the buoyant force over gravitational force (D) difference between buoyancy in salt and fresh waters 133. A vessel should normally behave as if all of its weight is acting downward through the center of gravity and all of its support is acting upward through the _____________. (A) keel (B) center of buoyancy (C) tipping center (D) amidships section 134. Between the side frames of a Vessel, support for the deck beams is provided by _________________. A. stanchions B. brackets C. web frames D. deck stringers

135. In the event of a collision, watertight integrity may be lost if _____________. (A) the sounding tube cap from a damaged tank is missing (B) the dogs on a manhole cover are secure (C) you have recently replaced a gasket in a watertight door (D) you operate the dewatering system from a flooded compartment 19.Which of the following conditions will occur to the ship's center of gravity if 200 tons of steel is transferred to the ships cargo hold from shore side? (A) The reserve buoyancy will rise. (B) The center of gravity will remain in the same position. (C) The center of gravity will be lowered. (D) The reserve buoyancy will remain the same 21.As regulation 12 of Annex 1 of MARPOL, all ships of __________ gross tonnage and above shall be provided with a sludge tank for collection of oil residues A.150 tonnes deadweight

B.150 gross tonnage C.400 tonnes deadweight D.400 gross tonnage 23.The validity of which of the following certificates is not 5 years? A. Safety equipment certificate B. Load line certificate C. Tonnage certificate D. Safety radio telegraphy certificate 136. Apparent slip is defined as A. s= (PN- V_S)/V_S ; B. s= (PN- V_a)/PN; C. s= (PN- V_S)/PN; D. s= (PN- V_a)/V_a 137. In- water survey in lieu of a one of the two docking surveys in a 5-year period may be accepted when: A. suitable high resistance paint is applied to the ship???s underwater hull B. The ship is less than 15 years old C. The in-water survey provides all the information required by classification society D. A part of the ship is on fire 138. Hull plating strakes are generally numbered as Ans: from keel to deck alphabetically up & aft to forward numerically up Rem. NP; LPS 139. 3.The curvature of the deck in fore and aft direction rising from amidships to a maximum at the ends is known as: A. Camber B. Rise of the floor C. Sheer * D. Tumble home 140. Under machinery spaces, cellular double bottoms must have plate floors at: A. Every alternate frame space

B. Every frame space * C. Not more than 3.05m apart D. Not more than 3.7m apart 141. A vessel is defined as stable if: A. GM is positive; * B. GM is negative; C. GM is zero; D. GM is either negative or positive 142. Plating on bulkheads are generally fitted ____________ for better graduation of thickness. A. Vertically in all bulkheads B. Horizontally in all bulkheads C. Vertically in transverse bulkheads only D. Horizontally in transverse bulkheads only 143. In transversely framed double bottoms, frame spaces between the solid floors are: A. Left unsupported B. Fitted with bracket floors C. Fitted with brackets at tank sides and center girder D. None of the above 144. The primary purpose of fitting a bulbous bow is to:

A. Improve the appearance of the ship. B. Strengthen the bow C. Improve propulsive efficiency * D. Improve resistance to pounding 145. Plates used to connect stern frames to flat plate keel are called: A. Shoe plates B. Coffin plates C. Stealer plates D. Boss plates 146. Air pipes in tanks are generally located: A. Near filling pipes B. Near pump suctions C. At the opposite end of filling pipes and/or the highest point in the tank * D. At the lowest point in the tank 147. Weight of rudder is taken by
a) steering gear b) rudder stock c) rudder carrier bearing d) locking pintle 148. Pitch of propeller is defined as A. Forward movement of propeller when rotated by 360 degree B. Forward movement of propeller in un-yielding medium when rotated by 360 degree; C. Forward movement of propeller when rotated by 3600 when the vessel is floating in water D. Forward movement of propeller when rotated by 360 degree and in sea water;

149. Stability of a vessel is defined as: A. Vessel will come not back to its initial position when external disturbance is withdrawn; B. Vessel will come back to its initial position when external disturbance is withdrawn and by suitably shifting of weights; C. Vessel will float at different position when external disturbance is withdrawn; D. Vessel will come back to its initial position when external disturbance is withdrawn;

150. A Suezmax vessel will have the following maximum limitations: A. B=34 m, d=10 m B. B=44 m, d=12 m C. B=54 m, d=14m D. B=64 m, d=16 m 151. The purpose of providing tumble home is to: A. Improve the appearance of the ship B. Help drain off water from deck easily C. Reduce the volume of water coming on deck D. Help drain tanks to bilges 152. At the ends of the ships, to prevent making plates too narrow, pair of adjacent of straks are made to run into one strake with the help of a, coffin plate b. shoe plate c. stealer plate d. oxter plate 153. In condition of assignment bulwark provided with a hole name of that hole Ans. Freeing holes 154. Wake is defined as A. w= (PN- V_S)/V_S ; B. w= (PN- V_a)/PN; C. w= (PN- V_S)/PN; D. w= (PN- V_a)/V_a ; 155. What is the direction of left had propeller

when looking from aft of ship it will rotate anitclockwise when looking from aft of ship it will rotate clockwise Note: always viewed from aft. 156. centroid of underwater hull is blanks 1) cg 2) cb 3) both 4) none 157. presently which types of rudders are used Ans. Semi Balanced.

Dia 3. Gen Cargo Ship Mid sec (right): 1) hatch coaming 2)upper deck plating 3)beam 4)tween deck plating 5)beam(for tween deck) 6)knee 7)cargo battens (answer of this diagram) 8)side plating 9)side frame 10)margin plate 11)stiffeners 12)centre grider 13)side grider 14)tank top 15)tank side bracket Dia4. Cruiser stern (Sun) : 1. Poop deck

2. Bulkhead 3. Cant frame 4. Cant beam 5. Deck center line grider 6. Upper deck 7. Bulkhead Stiffner 8. Bracket 9. Steering Flat 10. Centre line web* 11. Center line grider 12. Solid floors 13. Rudder trunk 14. Stern frame