Committing to the future

Measure, document, issue alarms.

Automated with testo Saveris.

testo Saveris: Simple, secure and efficient measurement data monitoring

The testo Saveris measurement system measures temperature and humidity values in the environment and in processes. The easy-to-use measurement system delivers safety and time savings thanks to automated measurement data recording.

Quick overview of system components Long-term memory provides safety and independence from the PC Alarm even without running PC - via LED - via relay output - via SMS Radio probe and Ethernet probe can be combined in one system

Diagram Start Copy Paste Clipboard Edit .. Open Rename Delete Edit Evaluation Options New group Template Day Month Diagram Table Alarms View Font Font Font size Arial 10 _Style

Data
Data Group 0 C C C Group 1 C C

Original size
October 2007 M T W T F S S

November 2007 M T W T F S S

December 2007 M T W T F S S Data Alarms System Reports

Today

Simple installation and configuration within few minutes Alarm via e-mail or directly on the screen Efficiency by means of central data storage of all measurement data Automatic creation of PDF reports

testo Saveris is ideally suited for and documentation of temperature or humidity data in production, quality assurance and R&D as well as in buildings Monitoring the storage climate of temperature and humidity sensitive products, e.g. valuable inventory, medicines and foodstuffs the foodstuff cooling chain

Precise measurement of temperature and humidity values The simplest probe logon at commissioning Manual start or read out no longer required Radio probe: simple connection without routing cables Safety through bidirectional radio and memory capacity in the probe Optimized battery concept for long running life Numerous probe versions tailored to every application

You have time for the basics. testo Saveris measures, documents centrally and issues alarms if limit values are exceeded.

testo Saveris System overview

testo Saveris radio probe

The testo Saveris radio probes measure temperature and humidity. In the measuring cycle, the probes save the recorded measurement data and send it to the central base at regular intervals. If a limit value is exceeded, a radio link is established immediately. Through bidirectional transmission, the radio probe and the base are in mutual contact. This therefore ensures that the measurement data is only recorded by the base and is not interfered with by other radio systems. An alarm sounds in the event that the radio link be interrupted by obstacles. The memory in the probe ensures that the measurement data is not lost in the event of an interference in the radio link. An optimized battery design ensures for long running life of the probe memory. In free field, the transmission path is approx. 300 m at a frequency of 868 MHz and approx. 100 m at a frequency of 2.4 GHz. In buildings, the transmission path is strongly influenced by structural conditions such as walls, refrigerator doors or metal doors. The radio link can be improved or lengthened with poor structural conditions by using a router. Because the radio probe and the router show the quality of their radio link, the probe can personally be positioned optimally by the user. Probe versions with internal and external sensors allow the adaptation to every application. The radio probes are available with or without a display as an option. Current measurement data, the battery status and the quality of the radio link are shown on the display.

testo Saveris radio probe

testo Saveris router

testo Saveris radio probe testo Saveris Ethernet probe

In addition to the radio probes, probes can be used that are directly connected to the Ethernet. The existing LAN infrastructure can be used through this. This allows the data transfer from the probe to the base, even over long distances. Ethernet probes can be used over any long periods since they are connected to the mains and therefore work independently of batteries. The internal memory guarantees that the existing measurement data is not lost, even with failure of the mains or the LAN connection. A display informs about the current measurement data as well as the probe status. Different probe versions (probe partially plug-in) adapt to the conditions of the application. Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. This combines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths.

testo Saveris radio probe

testo Saveris radio probe

testo Saveris software

USB or Ethernet

testo Saveris base

Ethernet

testo Saveris base

The base is the heart of testo Saveris and can save 40,000 readings per measurement channel independent of the PC. This corresponds to around one year of memory capacity at a measuring rate of 15 minutes. An emergency battery ensures that an alarm is transmitted and that no existing data is lost in the event of a power failure. The system data and alarms are visible via the display of the Saveris base. Even without the PC running, the base issues an alarm by means of an LED if the limit value is exceeded, or optionally via SMS and via a relay output to which an alarm transmitter can be connected. In total, a base can incorporate 150 radio and Ethernet probes or 254 measurement channels. The Saveris base is connected to the PC either via USB or Ethernet cable. The Saveris base thereby offers flexibility with the highest data security.

testo Saveris converter

testo Saveris Ethernet probe

testo Saveris software

The measurement data is transmitted from the base to a PC on which the testo Saveris software is installed within just a few minutes using an installation wizard. The initial system and probe configuration is also performed using the software. All measurement are saved centrally in the softwares database and can be called up any time as a table or a graphic. All alarms that occur are listed in a table as a history. The automatic creation of PDF reports in defined intervals also simplifies the documentation. Using the calendar function and the consolidation of probes into groups, the operation of the software is simple and intuitive. In the event of an alarm the user can choose between receiving a message via e-mail or a pop-up directly on the screen.

testo Saveris Ethernet probe

testo Saveris Ethernet probe

Examples of applications for testo Saveris

Production, quality assurance and storage

In industrial plants, a vast amount of quality data must be recorded in the production, quality assurance and storage of products. testo Saveris automates the documentation of this data and issues alarms if limit values are exceeded. Products and processes are thus secured at a stable quality level. testo Saveris is ideal to use for monitoring and documenting climate and temperature data in the manufacturing sector, in store rooms, refrigerators and air conditioning chambers. The most varied applications are optimally covered by testo Saveris radio probes or Ethernet probes

Gnter Ruf, Chairman of the Board of Directors Straub Druck + Medien AG

With testo Saveris, I have the perfect overview over all temperature and humidity data in processes and in the environment. The immediate issue of alarms provides me with important safety.

Research & development, laboratories & hospitals

Research and development areas such as laboratories are responsible for recording environmental and process data to monitor sensitive products and machines. testo Saveris takes on the central documentation of the series of measurements. testo Saveris thus guarantees the simple and secure monitoring of climate and process data in air conditioning chambers, refrigerators, drying chambers or test benches. Thanks to the quick installation of testo Saveris, the system is suitable for shortterm and long-term recording.

Monitoring the foodstuff cooling chain

Compliance with predefined temperature values is a decisive factor for quality in food production and is important for complying with legal hygiene requirements. Uninterrupted monitoring of the cooling chain in the supermarket and in specialist retailers is also necessary. testo Saveris automates the monitoring of the ambient and product temperatures in production plants, cold storage and freezer areas. Alarms are issued whenever the limit values are exceeded. The measurement data and alarms that have occurred are saved centrally in a database and are therefore accessible any time. testo Saveris conforms to the EN 12830 standard.

Monitoring of the building climate

When monitoring the building climate, stable ambient conditions are especially necessary in museums and archives in order to protect sensitive and expensive objects. testo Saveris automates the central recording of all climate data. By issuing alarms when limit values are exceeded, testo Saveris protects valuable inventory from undesired temperature or humidity influences at all times. The radio probe can be flexibly attached to locations without the effort of routing cables.

Frank Brunecker, Museum Director Museum Biberach

With testo Saveris we finally have a system that automatically documents our room climate. With this, I know that our most prized inventory is being stored in a secure climate, and all this without cabling.

testo Saveris Software

1
Hier konfigurieren Sie die angeschlossenen Messfhler. Liste der im System registrierten Fhler Seriennr.
1413872 1413855 1413842

Installation made easy

Connect Saveris base to mains. The probes can now be logged on at the base: The probes are switched on in series and automatically identified by the base. The Saveris base is connected to the PC via USB or Ethernet. The software is installed on the PC with help from the installation wizard. The system is ready for configuration: Probe name, limit values, measuring cycles and alarms can be adapted to the individual measuring tasks.

K. Einheit
1 1 1 C C C

Name
Khlraum 14 Theke 1 Khltruhe

Untergrenze
-14.0 2.0 -20.0

Obergrenze
-5.0 7.0 -18.0

TE-Typ

Namen und Grenzwerte vergeben. Einige Gerte erfordern eine manuelle Eingabe des Thermoelement (TE) Typs.

< Zurck

Weiter >

Abbrechen

2
Diagram Start Copy Paste Clipboard Edit Open Rename Organisieren Edit Group 0 Betriebsart Options Schliessen Delete Template Online Offline Online Start Online Stop Messung steuern Online Evaluation Day Month Diagram Histogramm Zahlenfeld View Grafik Table Alarms _Style

Clear and always up-to-date

The measurement data can always be shown as a graphic or table. If alarms have been triggered, these can be listed separately.

Data
Data Group 0 C C C Group1 C C October 2007 M T W T F S S

Original size

Various probes can be compiled into groups. Logical units according to the measurement task are thus formed. The measurement data view over days, weeks or months is freely definable. The integrated calendar offers practical assistance here.

November 2007 M T W T F S S

December 2007

Datum

Uhrzeit (C) Raum 1

(C) Raum 2

(C) Raum 3

M T W T F S S

Data Archiv System Alarms NUM Today

3
Daily report
Cold storage house zone: Hourly mean values on 03.08.2007
Time C freezer 1 %RH cold room 1 C refrigerator C drinks C freezer 2 C freezer 3 C freezer 4

Automated documentation
Form and time of the reporting are predefined once. The creation and saving of reports as a PDF file now takes place automatically in accordance with the set conditions. The files are therefore ready to be printed at any time.

Total maximum value Total average value Total minimum value

Small Business Edition (SBE) and Professional (PROF)

Now more flexible with Professional software

The Saveris software is available in two different versions. The basic version SBE (Small Business Edition) enables the appeal basic functions of the software. Die PROF (Professional) software version offers interesting additional functions, e.g.: The integration into the network via Ethernet. Constant monitoring of the measurement data is thereby possible. The measurement data can be monitored by various PCs integrated into the network. Photographs of machines or rooms can be saved as a picture. The respective measurement values are shown directly at the position of the probe in the room or at the machine in these. The link between the location and the measurement value is thus very easily visualized (s. picture). A comprehensive alarm management offers the option of alarming more than two people at the same time or in succession. Depending on the day of the week and the time, you can freely choose whether an alarm is sent via e-mail, SMS or pop-up.

4
Number field Start Copy Paste Clipboard Edit Open Rename Organizing Edit Group 0 Operating Options Close Delete Template Online Offline Online start Online stop Control Online Evaluation Day Month Diagram Histogram Number View Graphic Table Alarms _Style

Data
Data Group 0 C C C Group 1 C C

21 C 48 %RH

October 2007 M T W T F S S

November 2007 M T W T F S S

26 C 38 %RH

December 2007 M T W T F S S

Data Archive System Alarms

41 C 22 %RH

Today

Measurement data view via Internet

If external access to the measurement data from outside the location is required, Internet access for the display of all measurement data can be set up. Using a Web server, remote access to the required measurement data after logging in is possible from everywhere with Internet access.

Overview of software versions

Ordering data SBE software, incl. USB connecting cable base-PC Part no. 0572 0180 PROF software, incl. USB connecting cable base-PC Part no. 0572 0181

SBE Simple installation and configuration Diagrams/tables/alarm overview/PDF reports Calendar management Representation of probe group Transmission of alarms (e-mail, SMS, relay) Comprehensive alarm management Constant monitoring in PC continuous operation Measurement data on background photo of locations Integration into network (client-server)

PROF

testo Saveris Base

The base is the heart of testo Saveris and can save 40,000 readings independent of the PC. The system data and alarms are visible via the display of the Saveris base.

Display for showing alarms and system data Large data memory Issue of alarms via LED/relay SMS alarm (optional) Emergency battery integrated Up to 150 probes can be connected Connection option via USB or Ethernet

Registration
Probes Router Converter

Technical data Memory Dimensions Weight Protection class Material/Housing Radio frequency Power supply (absolutely necessary) Rech. batt. Oper. temp. Storage temp. Display Interfaces Connectable radio probe 40,000 values per channel (total max. 10,160,000 values) 225 x 150 x 49 mm Approx. 1510 g IP42 Diecast zinc / plastic 868 MHz / 2.4 GHz 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, power consumption < 4 W Li-ion battery (for data back-up and for emergency SMS with failure of the power supply) -10 to +50 C -40 to +85 C graphical display, 4 control keys USB, radio, Ethernet max. 15 probes can be directly connected via radio interface, max. 150 total via radio/router/converter/Ethernet, max. 254 channels max. 1 A, max. 30 W, max. 60/25 V DC/AC, NC or NO contact 850/900/1800/1900 MHz not valid for Japan and South Korea Table base and wall bracket included

Ordering data Saveris base, radio frequency 868 MHz Part no. 0572 0120 Saveris base, radio frequency 2.4 GHz 2.4 GHz 2.4 GHz Saveris base, radio frequency 868 MHz, GSM module integrated (for SMS alarm) Part no. 0572 0121 Saveris base, radio frequency 2.4 GHz, GSM module integrated (for SMS alarm) Part no. 0572 0161

868 MHz

Part no. 0572 0160

No mains units or antennas with magnetic base are contained in this ordering data.

Note on the radio frequencies 868 MHz: EU countries and certain other countries (e.g. CH, NOR) 2.4 GHz: non-EU countries (country list can be called up under www.testo.com/saveris )

Alarm relay GSM module Set up

868 MHz

testo Saveris Components: Router, converter and accessories

The radio link can be improved or lengthened with poor structural conditions by using a router. Naturally several routers are possible in the testo Saveris system, but several routers are not connected in series. Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. This combines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths.

Accessories Power supply Radio Ethernet Battery for radio probe (4 AA alkali manganese mignon batteries) Battery for radio probe for use below -10 C (4 Energyzer L91 Photo lithium) 100-240 V DC mains unit; for testo Saveris base, router, converter, Ethernet probe Radio Radio Mains unit (rail mounting) 90 to 264 VAC/ 24 VDC (2.5A) Mains unit (desk-top) 110 to 240 VAC/24 VDC (350mA) Other features Magnetic foot aerial with 3 m cable, for base with 1 GSM module Alarm module (visual + acoustic), can be connected to base alarm relay, diam. 70 x 164 mm, 24 V AC/DC or 320 mA, steady on: red, steady tone: buzzer approx. 2.4 kHz

Part no. Part no. 0515 0414 0515 0572 0554 1096 0554 1749 0554 1748 Part no. 0554 0524

Saveris router
Dimensions Weight Power supply Approx. 85 x 100 x 38 mm Approx. 180 g 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, power consumption < 0.5 W -20 to +50 C -40 to +85 C Kunststoff IP54 Radio max. 5 included Saveris router, 868 MHz, radio transmission medium

Saveris converter
Approx. 85 x 100 x 35 mm Approx. 190 g 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, power consumption < 2 W -20 to +50 C -40 to +85 C Kunststoff IP54 Radio, Ethernet max. 15 included Saveris converter, 868 MHz, converts the radio transmission medium to Ethernet Part no. 0572 0118 Saveris converter, 2.4 GHz, converts the radio transmission medium to Ethernet Part no. 0572 0158

0629 6666 Part no. 0572 0180 0572 0181 0572 0183 On request Part no. 0520 0151

Oper. temp. Storage temp. Material/Housing Protection class Interfaces Connectable radio probe Wall bracket Versions 868 MHz

Software SBE software, incl. USB connecting cable base-PC PROF software, incl. USB connecting cable base-PC Saveris adjustment software incl. connection cable for wireless and Ethernet probes Measurement data view via Internet Calibration Certificates

Part no. 0572 0119 Saveris router, 2.4 GHz, radio transmission medium

ISO calibration certificate/temperature; temp. data logger; calibration points -18C; 0C; +60C DKD calibration certificate/temperature; temp. data logger; cal. points -20C; 0C; +60C ISO cal. cert./humidity; humidity data logger; calibration points 11.3%RH and 75.3%RH at +25C DKD calibration cert./humidity; humidity data logger; cal. points 11.3%RH and 75.3%RH at +25C

2.4 GHz

0520 0261

Part no. 0572 0159

0520 0076

No mains units are contained in this ordering data.

0520 0246

Note on the radio frequencies 868 MHz: EU countries and certain other countries (e.g. CH, NOR) 2.4 GHz: non-EU countries (country list can be called up under www.testo.com/saveris ) Magnetic foot aerial Alarm module (visual + acoustic), can be connected to base alarm relay

testo Saveris Components: Radio probes

Probe versions with internal and external temperature sensors and with humidity sensors allow the adaptation to every application. The radio probes are available with or without a display as an option. Current measurement data, the battery status and the quality of the radio link are shown in the display.

C NTC
81 mm

%RH, C NTC
81 mm 81 mm

NTC
internal

TC
81 mm

Pt 100 %RH NTC

external internal

internal

external

external

Radio
Probe type Internal sensor Meas. range Accuracy Resolution Probe type Meas. range (Instrument)

Saveris T1
Radio probe with internal NTC

Saveris T2
Radio probe with external probe connection and internal NTC, door contact NTC -35 to +50 C 0.4 C (-25 to +50 C) 0.8 C (remaining range) 0.1 C NTC -50 to +150 C

Saveris T3
2-channel radio probe with 2 external TC probe connections (Choice of TC characteristics)

Saveris Pt
Radio probe with 1 external Pt100 probe connection

Saveris H3
Humidity radio probe

NTC -35 to +50 C 0.4 C (-25 to +50 C) 0.8 C (remaining range) 0.1 C

NTC -20 to +50 C 0.5 C

0.1 C / 0.1 C td

Humidity sensor 0 to 100 %RH 3 %RH 0.1%

TC type K

External probe

Pt100 -195 to +1350 C -100 to +750 C -200 to +600 C TC type T TC type S

-200 to +400 C 0 to +1760 C

TC type J

Accuracy (Instrument)

0.2 C (-25 to +70 C) 0.4 C (remaining range)

0.5 C or 0.5% of mv

at 25 C 0.1 C (0 to +60 C) 0.2 C (-100 to +200 C) 0.5 C (remaining range) 0.01 C 1 Pt100 via mini-DIN socket

Resolution Connection

0.1 C NTC via mini-DIN socket, door contact connection cable included in delivery (1.80 m)

0.1 C 1 C 2 TCs via TC socket, max. difference in potential 2 V

868 MHz

Dimensions (housing): Weight Battery type Battery life Material/Housing Protection class IP68 Radio frequency Measuring rate Conformity with standards Oper. temp. Storage temp. Display (optional) Transmission distance Wall bracket Versions Version without Saveris T1 display Part no. 0572 1110 Version with display Version without display Version with display Saveris T1 D Part no. 0572 1120 Saveris T1 Part no. 0572 1150 Saveris T1 D Part no. 0572 1160

80 x 85 x 38 mm Approx. 240 g 4 AA batteries Battery life at +25 C, 3 years; for freezer applications, 3 years with L91 Photo lithium Energyzer batteries Kunststoff IP68 IP54 IP68 IP42 868 MHz / 2.4 GHz Standard 15 min, 1 min to 24 h can be set DIN EN 12830 -35 to +50 C -20 to +50 C -40 to +55 C LCD, 2 lines; 7-segment with symbols approx. 300 m free field at a frequency of 868 MHz, approx. 100 m free field at a frequency of 2.4 GHz included Saveris T2 Part no. 0572 1111 Saveris T2 D Part no. 0572 1121 Saveris T2 Part no. 0572 1151 Saveris T2 D Part no. 0572 1161 Saveris T3 Part no. 0572 9112 Saveris T3 D Part no. 0572 9122 Saveris T3 Part no. 0572 9152 Saveris T3 D Part no. 0572 9162 Saveris Pt Part no. 0572 7111 Saveris Pt D Part no. 0572 7121 Saveris Pt Part no. 0572 7151 Saveris Pt D Part no. 0572 7161 Saveris H3 Part no. 0572 6110 Saveris H3 D Part no. 0572 6120 Saveris H3 Part no. 0572 6150 Saveris H3 D Part no. 0572 6160

The AA alkali manganese mignon batteries (0515 0414) are contained in this ordering data.

2.4 GHz

testo Saveris Components: Ethernet probes

The existing LAN infrastructure can be used through the Ethernet probe. This allows the data transfer from the probe to the base, even over long distances. Ethernet probes have a display.

C
Pt 100
external

%RH, C TC
external

%RH NTC
external

%RH NTC
external

100 mm

12 mm

100 mm 12 mm

Ethernet
Probe type Meas. range (Instrument)

Saveris Pt E
Ethernet probe with external Pt100 probe connection Pt100 -200 to +600 C

Saveris T4 E

Saveris H2 E

Saveris H1 E
Humidity Ethernet probe 1%

4-channel Ethernet probe with 4 Humidity Ethernet probe 2 % external TC probe connections TC type T
-200 to +400 C

TC type S
0 to +1760 C

External probe

Humidity sensor 0 to 100 %RH*

NTC -20 to +70 C

Humidity sensor 0 to 100 %RH*

NTC -20 to +70 C

TC type K at 25 C 0.1 C (0 to +60 C) 0.2 C (-100 to +200 C) 0.5 C (remaining range) 0.01 C 1 Pt100 via mini-DIN socket

TC type J to 90 %RH: 2 %RH > 90 %RH: 3 %RH 0.5 C

to 90 %RH: (1 %RH +0.7 % of mv) at +25 C > 90 %RH: (1.4 %RH +0.7 % of mv) at +25 C 0.2 C (0 to +30 C) 0.5 C (remaining range)

-195 to +1350 C -100 to +750 C

Accuracy (Instrument)

0.5 C or 0.5% of mv

Resolution Connection

0.1 C 1 C

0.1 C 0.1% / 0.1 C td Mini-DIN service interface is accessible externally

0.1% / 0.1 C td

0.1 C

4 TCs via TC socket, max. difference in potential 50 V Approx. 220 g Approx. 85 x 100 x 38 mm Approx. 230 g Approx. 230 g 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals Li-ion Kunststoff IP54 2 s to 24h -20 to +70 C -40 to +85 C LCD, 2 lines; 7-segment with symbols included Saveris H2 E With display Part no. 0572 6192

Dimensions (housing): Weight Power supply (absolutely necessary) Buffer battery Material/Housing Protection class Measuring rate Oper. temp. Storage temp. Display Wall bracket

Approx. 220 g

Saveris Pt E With display Part no. 0572 7191

Saveris T4 E With display Part no. 0572 9194

Saveris H1 E With display Part no. 0572 6191 *not for continuous high-humidity applications

No mains units are contained in this ordering data

Sintered caps for Saveris H1 E and H2 E Ethernet probes Metal protection cage, 12 mm for humidity probes, for measurement in flow velocities of less than 10 m/s Cap with wire mesh filter, 12 mm Teflon sintered filter, 12 mm, for corrosive substances, high humidity range (longterm measurements), high velocities Stainless steel sintered cap, 12 mm, is screwed onto humidity probe, for measurements at high flow velocities or in contaminated air testo saline pots for control and humidity adjustment of humidity probes, 11.3 %RH and 75.3 %RH with adapter for humidity probe, quick checks or calibration of humidity probe

Part no. 0554 0755 0554 0757 0554 0756 0554 0647 0554 0660

testo Saveris Accessories: External temperature probes

Plug-in probes Robust, Pt100 stainless steel food probe (IP65) Robust, waterproof Pt100 immersion/penetration probe

Pt 100

Illustration
125 mm 4 mm 15 mm 3 mm 114 mm 5 mm 50 mm 3.7 mm

Meas. range -50 to +400 C

Accuracy Class A (-50 to +300 C), Class B (remaining range) Class A (-50 to +300 C), Class B (remaining range)

t99 10 s

Part no. 0609 2272

Conn.: Fixed cable

-50 to +400 C

12 s

0609 1273

Fixed cable Connection cable for Pt100 stationary probe with screw terminals (4-wire technology)

0554 0213

Plug-in probes Stationary probe with stainless steel sleeve, TC Type K Robust air probe, T/C Type K

TC

Illustration
40 mm 6 mm

Meas. range -50 to +205 C

Accuracy Class 2*

t99 20 s

Part no. 0628 7533

Conn.: Fixed cable 1.9 m

115 mm 4 mm

-60 to +400 C

Class 2*

25 s

0602 1793

Conn.: Fixed cable 1.2 m

Magnetic probe, adhesive force approx. 20 N, with magnets, for measurements on metal surfaces, TC Type K Fixed cable

35 mm 20 mm

-50 to +170 C

Class 2*

150 s

0602 4792

75 mm Magnetic probe, adhesive force approx. 10 N, with magnets, for higher temp., for measurements on metal surfaces, TC Type K Conn.: Fixed cable 1.6 m

21 mm

-50 to +400 C

Class 2*

0602 4892

Pipe wrap probe for pipe diameter 5 to 65 mm, with exchangeable measuring head. Meas. range short-term to +280C, TC Type K

-60 to +130 C Conn.: Fixed cable 1.2 m

20 mm

Class 2*

5s

0602 4592

395 mm Pipe wrap probe with Velcro strip, for temperature measurement on pipes with diameter up to max. 120 mm, Tmax +120C, TC Type K Conn.: Fixed cable 1.5 m 800 mm Thermocouple with TC adapter, flexible, 800mm long, fibre glass, TC Type K 1.5 mm

-50 to +120 C

Class 1*

90 s

0628 0020

-50 to +400 C -50 to +400 C -50 to +250 C

500 mm 1.5 mm

Class 2* Class 2* Class 2* Class 1* Class 1*

5s 5s 5s 5s 4s

0602 0644 0602 0645 0602 0646 0602 5792 0602 5693

Thermocouple with TC adapter, flexible, 1500mm long, fibre glass, TC Type K Thermocouple with TC adapter, flexible, 1500mm long, Teflon, TC Type K Immersion tip, flexible, TC Type K Immersion measurement tip, flexible, for measurements in air/exhaust gases (not suitable for measurements in smelters), TC Type K

1500 mm 1.5 mm 1500 mm 1.5 mm

-200 to +1000 C -200 to +1300 C

1000 mm 3 mm

The specified accuracy class of the Saveris radio and Ethernet probe is achieved using these external probes.

*According to standard EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 C (Type K), Class 2 to -40 to +1200 C (Type K), Class 3 to -200 to +40 C (Type K).

You can find all temperature probes tailored to your application at www.testocelsius.de or in the Stationary measurement solutions catalogue.

testo Saveris Accessories: External temperature probes

NTC

Plug-in probes Stub probe, IP 54

Illustration
35 mm 3 mm

Meas. range -20 to +70 C

Probe accuracy 0.2 C (-20 to +40 C) 0.4 C (+40.1 to +70 C) 0.2 C (0 to +70 C) 0.5 C (remaining range) 0.2 C (-25 to +74.9 C) 0.4 C (remaining range) 0.2 C (-25 to +74.9 C) 0.4 C (remaining range) 0.2 C (0 to +70 C)

t99 15 s

Part no. 0628 7510

65

Stationary probe with aluminium sleeve, IP

40 mm 6 mm

-30 to +90 C

190 s 5s

0628 7503*

Conn.: Fixed cable; Cable/length: 2.4 m Accurate imm./pen. probe, 6m cable, IP 67

40 mm 3 mm 3 mm

-35 to +80 C

0610 1725*

Conn.: Fixed cable; Cable/length: 6 m Accurate immersion/penetration probe, cable: 1.5 m long, IP 67 Wall surface temperature probe, e.g. to prove damage in building material Conn.: Fixed cable; Cable/length: 3 m Stainless steel NTC food probe (IP65) with PUR cable Waterproof NTC immersion/penetration probe Conn.: Fixed cable
30 mm 125 mm 4 mm 15 mm 3 mm 40 mm 3 mm 3 mm

-35 to +80 C

5s

0628 0006*

Conn.: Fixed cable; Cable/length: 1.5 m -50 to +80 C 20 s 0628 7507

-50 to +150 C1) 0.5% of mv (+100 to +150 C)

0.2 C (-25 to +74.9 C) 0.4 C (remaining range)

8s

0613 2211*

Conn.: Fixed cable; Cable/length: 1.5 m

115 mm 5 mm 50 mm 4 mm

-50 to +150 C

0.5% of mv (+100 to +150 C) 0.2 C (-25 to +74.9 C) 0.4 C (remaining range)

10 s

0613 1212

Pipe wrap probe with Velcro for pipe diameter to max. 75 mm, Tmax. +75C, NTC

300 mm

-50 to +70 C

0.2 C (-25 to +70 C) 0.4 C (-50 to -25.1 C)

0613 4611

Conn.: Fixed cable; Cable/length: 1.5 m The specified accuracy class of the Saveris radio and Ethernet probe is achieved using these external probes.

* Probe tested to EN 12830 for suitability in the transport and storage sectors 12) Long-term measurement range +125C, short-term +150C or +140C (2 minutes)

You can find all temperature probes tailored to your application at www.testocelsius.de or in the Stationary measurement solutions catalogue.

testo Saveris Sets

You can assemble all individual components yourself, of course, but you also have the option of ordering a testo Saveris set. This can be supplemented with individual components as required.

Saveris set 1

Saveris set 2

Saveris set 3

Set 1: 868 MHz, consisting of base 0572 0120, 3 NTC radio probes without display 0572 1110, mains unit for base 0554 1096 and SBE software 0572 0180 incl. USB cable

Set 2: 868 MHz, consisting of base 0572 0120, 5 NTC radio probes with display 0572 1120, router 0572 0119, 2 mains units for base and router 0554 1096 and SBE software 0572 0180 incl. USB cable

Set 3: 868 MHz, consisting of base 0572 0121 incl. GSM module for SMS alarm, antenna with magnetic base 0554 0524, 5 NTC radio probes with display 0572 1120, router 0572 0119, 2 mains units for base and router 0554 1096 and SBE software 0572 0180 incl. USB cable

Set 1, 868 MHz Part no. 0572 0110

Set 1: 2.4 GHz, consisting of base 0572 0160, 3 NTC radio probes without display 0572 1150, mains unit for base 0554 1096 and SBE software 0572 0180 incl. USB cable

Set 2, 868 MHz Part no. 0572 0111

Set 2: 2.4 GHz, consisting of base 0572 0160, 5 NTC radio probes with display 0572 1160, router 0572 0159, 2 mains units for base and router 0554 1096 and SBE software 0572 0180 incl. USB cable

Set 3, 868 MHz Part no. 0572 0112

Set 3: 2.4 GHz, consisting of base 0572 0161 incl. GSM module for SMS alarm, antenna with magnetic base 0554 0524, 5 NTC radio probes with display 0572 1160, router 0572 0159, 2 mains units for base and router 0554 1096 and SBE software 0572 0180 incl. USB cable

Set 1, 2.4 GHz Part no. 0572 0150

Set 2, 2.4 GHz Part no. 0572 0151

Set 3, 2.4 GHz Part no. 0572 0152

Adjustment and service Adjustment

Naturally all testo Saveris probes are adjusted in the factory, which is confirmed by an adjustment report. You can perform further calibrations or adjustments either yourself on site, via a service provider or in a calibration laboratory. The separate Saveris adjustment software is available for this. After successful adjustment, the current data is stored in the probe. At the same time, the adjustment software and the Saveris software accept this data so that the adjustment histories are available. Radio and Ethernet probes are connected to a cable via the service interface for adjustment. If you do not wish to perform your own calibration, testo is available as a service provider.

Ordering data Saveris adjustment software incl. connection cable for wireless and Ethernet probes Part no. 0572 0183

Service
testo is a manufacturer of measuring instruments and measuring systems with a global presence, with 27 international subsidiaries and representatives in numerous countries. Naturally, testo also offers you onsite service. For questions regarding testo Saveris, from installation to retrofitting further system components, please refer to your competent contact in your country. You can find an overview of the nearest service location at www.testo.com.

< 0981 7654/IND/XX/A/12.2007

Subject to change without notice.