Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 110 views

    Modul 3 Construction Tools and Equipment

    Uploaded by

    Emily Jampong Emily
    This document contains information about a vocational college module on construction tools and equipment, including: - The module code, credits, and contact hours - Six intended learning outcomes covering tool identification and use, safety procedures, and avoiding hazards - Descriptions of the module's content including hand tools, power tools, equipment, and safety practices - Performance criteria and learning standards for four content areas of the module

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Modul 3 Construction Tools and Equipment

    Uploaded by

    Emily Jampong Emily
    110 views8 pages
    This document contains information about a vocational college module on construction tools and equipment, including: - The module code, credits, and contact hours - Six intended learning outcomes covering tool identification and use, safety procedures, and avoiding hazards - Descriptions of the module's content including hand tools, power tools, equipment, and safety practices - Performance criteria and learning standards for four content areas of the module

    Original Description:

    ,,,,MKJNNM

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains information about a vocational college module on construction tools and equipment, including: - The module code, credits, and contact hours - Six intended learning outcomes covering tool identification and use, safety procedures, and avoiding hazards - Descriptions of the module's content including hand tools, power tools, equipment, and safety practices - Performance criteria and learning standards for four content areas of the module

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    110 views8 pages

    Modul 3 Construction Tools and Equipment

    Uploaded by

    Emily Jampong Emily
    This document contains information about a vocational college module on construction tools and equipment, including: - The module code, credits, and contact hours - Six intended learning outcomes covering tool identification and use, safety procedures, and avoiding hazards - Descriptions of the module's content including hand tools, power tools, equipment, and safety practices - Performance criteria and learning standards for four content areas of the module

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    December Edition

    2012

    MINISTRY OF EDUCATION, MALAYSIA VOCATIONAL COLLEGE STANDARD CURRICULUM MODULE INFORMATION

    MODULE CODE LEVEL CREDIT UNIT CONTACT HOUR

    : : : : :

    CONSTRUCTION TOOLS AND EQUIPMENT CCT 103 1 SEMESTER 1 2.0 FACE TO FACE NON FACE TO FACE : 3.0 HOURS/WEEK :

    MODULE TYPE PREREQUISITE CORE REQUISITE

    : : :

    VOCATIONAL -

    Last Edited Module Page

    03 06 Dec 2012 1/8 Document Page 1

    December Edition

    2012

    MODULE OUTCOMES:

    At the end of the module, students should be able to:1. 2. 3. 4. 5. 6. Follow and practise basic security procedures. Avoid workplace hazards. Identify and use hand tools and machine according to various types of jobs Identify, use and maintain power tools Identify, use and maintain equipment /plants Practise construction safety when handling tools and equipment or plants at on site

    MODULE DESCRIPTION

    This module Identifies the usage and maintenance of hand machine tools , power tools, power tools and the equipment based on the required specifications. It is also to ensure that the construction safety are practiced as to avoid the work place hazards and the tasks are carried out as scheduled.

    Last Edited Module Page

    03 06 Dec 2012 2/8 Document Page 2

    December Edition

    2012

    CONTENT AND LEARNING STANDARDS COURSE MODULE CODE : : : CONSTRUCTION TECHNOLOGY CONSTRUCTION TOOLS AND EQUIPMENTS CCT 103

    CONTENT STANDARD 1. IDENTIFY, USE AND MAINTAIN HAND AND MACHINE TOOLS

    LEARNING STANDARD 1.1 Identify the tasks to be done Clearly.

    PERFORMANCE CRITERIA 1.1.1 Recognize the nature of task to be carried out.

    1.2 Select the appropriate hand tools for tasks.

    1.2.1 Select appropriate hand tools to suit the given task . 1.2.2 Use hand tools and machine tools to complete the task according to requirement. 1.3.1 Select the location of proposed work according to the task.

    1.3 Determine the location of the proposed tasks correctly. 1.4 Identify appropriate machine tools to be used .

    1.4.1 Select machine tools to be used to suit the task 1.4.2 Operate machine tools according to the Manufacturer's Instructions and Specification 1.5.1 Locate equipment at their proper place as scheduled 1.5.2 Clean and grease the hand tools and machine tools in accordance with the manufacturer's instructions and specification. 1.5.3 Maintain all parts/ components in good condition according to Manual Manufacturing Procedure. 1.5.4 Store tools in their proper place according to layout plan.
    Document Page 3

    1.5 Make proper maintenance and store hand tools and machine tools.

    Last Edited Module Page

    03 06 Dec 2012 3/8

    December Edition

    2012

    CONTENT AND LEARNING STANDARDS COURSE MODULE CODE : : : CONSTRUCTION TECHNOLOGY CONSTRUCTION TOOLS AND EQUIPMENTS CCT 103

    CONTENT STANDARD

    LEARNING STANDARD

    PERFORMANCE CRITERIA

    2 IDENTIFY, USE AND MAINTAIN POWER TOOLS

    2.1 Identify appropriate types of power tools. 2.2 Select the appropriate Accessories. 2.3 Assemble part of accessories Correctly. 2.4 Adjust the cutting parts correctly

    2.1.1

    Select various types of power tools on construction site according to the tasks. Select the appropriate accessories according to tasks requirement. Fit together the parts of power tools according to Manufacturer's Instructions .

    2.2.1

    2.3.1

    2.4.1 Rearrange the cutting parts of power tools in accordance with manufacturer's Instructions. 2.5.1 Ensure that the power supply is correctly connected to the Tools. 2.6.1 Operate power tools correctly according to the Manual Instruction 2.7.1 Disassemble parts of accessories according to the Manual Instructions

    2.5 Connect tools to power supply.

    2.6 Operate power tools effectively according to Manual . 2.7 Disassemble parts of accessories.

    Last Edited Module Page

    03 06 Dec 2012 4/8 Document Page 4

    December Edition

    2012

    2.8 Make proper maintenance and store power tools.

    2.8.1 Locate equipment at their proper place as in a schedule. 2.8.2 Clean and grease the power tools according to manual manufacturing instructions. . 2.8.3 Maintain all parts/ components in good condition according to Manual Manufacturing Procedure. 2.8.4 Store tools in their proper place according to the layout plan.

    Last Edited Module Page

    03 06 Dec 2012 5/8 Document Page 5

    December Edition

    2012

    CONTENT AND LEARNING STANDARDS COURSE MODULE CODE : : : CONSTRUCTION TECHNOLOGY CONSTRUCTION TOOLS AND EQUIPMENTS CCT 103

    CONTENT STANDARD

    LEARNING STANDARD

    PERFORMANCE CRITERIA

    3 IDENTIFY ,USE AND MAINTAIN EQUIPMENT/PLANTS

    3.1 Identify appropriate types of equipment / plants. 3.2 Select the appropriate Accessories. 3.3 Assemble part of accessories Correctly. 3.4 Perform maintenance according to manual. 3.5 Operate equipment according to Manual . 3.6 Ensure the equipment functions correctly. 3.7 Make proper maintenance and store equipment.

    3.1.1 Select equipment according to tasks requirement 3.2.1 Select the appropriate accessories according to power tools job requirement

    3.3.1 Fit together the parts of accessories of equipment correctly.

    3.4.1 Perform maintenance in accordance with the manufacturer's Instructions and Manual. 3.5.1 Operate equipment according to Manual Operating Procedures. 3.6.1 Check to ensure that equipment are functioning well according manufacturer's directions and manual 3.7.1 Locate equipment to the proper place as in a schedule

    Last Edited Module Page

    03 06 Dec 2012 6/8 Document Page 6

    December Edition

    2012

    3.7.2 Clean and grease the power tools according to Manual Manufacturing Instructions. 3.7.3 Maintain all parts/ components in good condition according to Manual Manufacturing Procedures 3.7.4 Store tools in their proper place according to layout plan.

    Last Edited Module Page

    03 06 Dec 2012 7/8 Document Page 7

    December Edition

    2012

    CONTENT AND LEARNING STANDARDS COURSE MODULE CODE : : : CONSTRUCTION TECHNOLOGY CONSTRUCTION TOOLS AND EQUIPMENTS CCT 103

    CONTENT STANDARD

    LEARNING STANDARD

    PERFORMANCE CRITERIA

    4. IDENTIFY CONSTRUCTION SAFETY IN HANDLING TOOLS AND EQUIPMENT /PLANTS AT CONSTRUCTION SITE

    4.1 Identify the safety practice when using special tool at construction site.

    4.1.1 List safety practice when using special tool at construction site according to Safety Procedure 4.1.2 Write a report of safety practice when using special tools at construction site.

    4.2 Prepare a report writing for safety environment at construction site.

    4.2.1 4.2.2

    Identify the safety environment at construction site. Write a report of safety environment at construction site.

    Last Edited Module Page

    03 06 Dec 2012 8/8 Document Page 8

    You might also like