Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 219 views

    Designed by Katie Frym of Maywood Studio 54" X 76" Quilt

    Uploaded by

    magickmerlin
    This summary provides the key details about the Mr. Snow quilt project in 3 sentences: The Mr. Snow quilt project instructions summarize how to make a 54" x 76" quilt featuring an appliquéd snowman motif using the Through the Woods fabric line. The instructions provide cutting and piecing directions to construct snowman applique blocks that are then arranged and bordered to complete the quilt top. Detailed steps guide the applique, piecing, quilting, and binding of the project to create the winter-themed quilt.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Designed by Katie Frym of Maywood Studio 54" X 76" Quilt

    Uploaded by

    magickmerlin
    219 views7 pages
    This summary provides the key details about the Mr. Snow quilt project in 3 sentences: The Mr. Snow quilt project instructions summarize how to make a 54" x 76" quilt featuring an appliquéd snowman motif using the Through the Woods fabric line. The instructions provide cutting and piecing directions to construct snowman applique blocks that are then arranged and bordered to complete the quilt top. Detailed steps guide the applique, piecing, quilting, and binding of the project to create the winter-themed quilt.

    Original Description:

    Quilting pattern and instructions.

    Original Title

    mrsnow

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This summary provides the key details about the Mr. Snow quilt project in 3 sentences: The Mr. Snow quilt project instructions summarize how to make a 54" x 76" quilt featuring an appliquéd snowman motif using the Through the Woods fabric line. The instructions provide cutting and piecing directions to construct snowman applique blocks that are then arranged and bordered to complete the quilt top. Detailed steps guide the applique, piecing, quilting, and binding of the project to create the winter-themed quilt.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    219 views7 pages

    Designed by Katie Frym of Maywood Studio 54" X 76" Quilt

    Uploaded by

    magickmerlin
    This summary provides the key details about the Mr. Snow quilt project in 3 sentences: The Mr. Snow quilt project instructions summarize how to make a 54" x 76" quilt featuring an appliquéd snowman motif using the Through the Woods fabric line. The instructions provide cutting and piecing directions to construct snowman applique blocks that are then arranged and bordered to complete the quilt top. Detailed steps guide the applique, piecing, quilting, and binding of the project to create the winter-themed quilt.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    Mr.

    Snow

    For download only www.maywoodstudio.com

    54 x 76 quilt

    Designed by Katie Frym of Maywood Studio Instructions by Jackie Robinson of Animas Quilts ~ www.animas.com

    Through the Woods fabric by Maywood Studio

    Pieced by Lori Marvel, Rexford, MT Quilted by Aimee Mahan, Omaha, NE

    6000 N. Cutter Cir. 4561 Maywood Ave

    Portland, OR 97217 Vernon, CA 90058

    A Division of E. E. Schenck Co. 800.433.0722 503.284.4124 800.237.6620 323.584.8820

    A 54 x 76 quilt project by Katie Frym Featuring Through the Woods fabric from Maywood Studio

    Mr. Snow
    1667-J 1/2 yd 1668-R 1/4 yd 1669-R 1/4 yd 1665-J 1-5/8 yds 1666-J 3/4 yd 1663-J 1-1/8 yds 1664-R 3/8 yd 1669-J 1-3/8 yds 3-1/2 yds

    Fabric
    Appliqu Background Snowman for Appliqu Hat Print Cornerstones & Hats Plaid Frames Triangle Corners Toile Sashing Large Cornerstones Outer Border & Binding Fusible for Applique 1/2 yd Binding Miter Tool - www.animas.com

    Backing

    Cutting
    Appliqu Background ~ 1667-J Cut (2) 7-1/2 strip into: (6) 7-1/2 squares Snowman for Appliqu ~ 1668-R Cut (6) Snowman bodies Hat Print Cornerstones & Hats ~ 1669-R Cut (2) 2-1/2 strips into: (24) 2-1/2 squares (4) 2 squares use left over for Snowman Hats Cut (1) 2 strip into: (20) 2 squares Plaid Frames ~ 1665-J Cut (3) 12-1/2 strips - cut a diagonal from top left corner 11 across to 11 down, then: (24) 14-1/2 x 2-1/2 bias (see Fig. 1) (6) 2 x as long as possible from the corner wedges for Scarves Cut (2) 7 strips - cut a diagonal from top left corner 5-1/2 across to 5-1/2 down, then: (24) 2 x 7-1/2 Triangle Corners ~ 1666-J Cut (3) 7-7/8 strips into: (12) 7-7/8 squares, each then diagonally once Toile Sashing ~ 1663-J Cut (1) 18-1/2 strip into: (9) 4-1/2 x 18-1/2 vertical panels Cut (4) 4-1/2 strips into: (8) 4-1/2 x 18-1/2 horizontal panels Large Cornerstones ~ 1664-R Cut (2) 4-1/2 strips into (12) 4-1/2 squares Outer Border & Binding ~ 1669-J Cut (7) 3-1/2 strips for Border Cut (7) 2-1/2 strips for Binding

    Fig. 1

    Piecing Instructions
    This pattern is planned with precise 1/4 seams throughout. To test your 1/4 seam to see if its right on, cut two pieces of fabric EXACTLY 1-1/2 x 5. Stitch them together along the 5 length. Measure across the two - at the mid-point. They should be exactly 2-1/2 wide. If not, adjust your seam allowance, and repeat this procedure until correct. 1. Stitch each 2 x as long as possible bias Plaid into a tube with a 1/8 seam. Turn and press, leaving the ends raw. 2. Using your favorite Fusible for appliqu, trace a Snowman shape for each of the 6 blocks. Position it on the Appliqu Background. Before fusing, fold a Step 1 scarf in half and slide the folded edge under the snowmans neck. Attach by fusing and then use your favorite stitch to secure the snowman to the background, keeping the scarf loose. (The scarf will lie out away from the snowman until step 7.) 3. Trace the Snowmans Hat on fusible and apply to Hat print. Also cut and fuse a nose. Fuse in place and stitch. Make 6. 4. Add the Plaid hatband by tracing and fusing on left over plaid. Stitch in place. 5. With a zigzag stitch and brown thread, give each snowman two arms, as shown. Youll need to use a stabilizer under this fabric to prevent rippling or stretching. 6. Either satin stitch or embellish with beads the dots for the coal mouth and eyes. Make 6. 7. Tie the scarf on each snowman and lightly tack it in place with thread so it will stay. Make 6. 11. Stitch a Triangle Corner to each of the 4 sides of the Step 10 pieces. The triangle will overlap the square by a seam allowance on each end, all the way around. Take care to NOT stretch these. Make 6. Press toward the triangles after all 4 are in place. 8. Stitch a 2 x 7-1/2 Bias Plaid gently to two opposite sides of the Appliqu blocks. Make 6. Do NOT press.

    9. Add a 2 square of Cornerstone to both ends of the remaining (12) 2 x 7-1/2 Bias Plaid pieces. Do NOT press. 10. Attach the Step 9 units above and below the Step 8s. Make 6. Do NOT press.

    12. Stitch a 2-1/2 x 14-1/2 Bias Plaid to two opposite sides of each block. Make 6. Do NOT press.

    Snowman appliqu templates on pages 6-7

    13. Stitch a 2-1/2 square of Cornerstone to both ends of the remaining (12) 2-1/2 x 14-1/2 Bias Plaid pieces. Do NOT press.

    17. Add the Step 16 units above each Step 15 block, and also below two of them for the bottom row.

    14. Attach the Step 13 units above and below the Step 12s. Make 6. Do NOT press.

    18. Lay out the blocks and stitch them together. Then create the right side column of 4-1/2 Large cornerstones alternating with 4-1/2 x 18-1/2 Vertical Toile Sashing, and add it. Press carefully. 15. Add a 4-1/2 x 18-1/2 Vertical Toile Sashing to the left of each block. Wait to press.

    16. Stitch a 4-1/2 Large Cornerstone square to the left end of all (8) 4-1/2 x 18-1/2 Horizontal Toile Sashings.

    19. Stitch the 3-1/2 strips of Outer Border together, end to end. Measure through the center of the quilt, and cut two lengths this size for the two sides. Stitch them in place. 20. Measure across the center of your quilt, including the borders added in Step 19. Cut two Outer Borders this length and stitch them to the Top and Bottom. Press.

    Finishing
    21. Prepare for quilting. To quilt, we suggest outlining the Snowmen. Try an allover loose meander of snowflakes in the background. 22. Bind with the 2-1/2 strips that match the outer border. To ensure perfect miters on your binding, use the Binding Miter Tool from Animas Quilts.

    Snowman Appliqu Template

    You might also like