Fresa Men To

1 B
Milling
Indexable Milling Tools
Indexable milling tools Indexable milling inserts Technical information B1-B170 B2-B137 B138-B163 B164-B170 B171-B290 B171-B284 B285-B290
Solid Carbide End Mills

Solid carbide end mills Technical information
1 B
2 B
Milling
How to choose the right milling tool
Identify the classification of milling
According to machining operations
product series Define your type of milling operation Approach angle

Face milling tools
Kr:45o
Applicable machining operations

For face milling, chamfering, shoulder milling etc.
Inserts specification Workpiece materials
The insert shape, type, dimension, grade, stock ect.
Structure and coupling size

A type of coupling B type of coupling
Selection of inserts
Steel Workpiece material
Good working condition
Normal working condition
Bad working condition
FMA01
Stainless steel Cast iron Non-ferrous metal Heat resistant alloy, Ti alloy
Basic dimensions(mm)
C type of coupling D type of coupling
CVD Coating
YBM251 YBM351 YBC301 YBD152 YBD252
PVD Coating
YBG102 YBG202 YBG302 YBG152 YBG252
Cermet
YNG151C YNG151
Cemented carbide
YC30S YD051 YD101 YD201
Insert shape
Type L
SEET12T3-DF
13.4 13.4 13.4 13.4 13.4 13.4 13.4 13.4
I.C
13.4 13.4 13.4 13.4 13.4 13.4 13.4 13.4
S
3.97 3.97 3.97 3.97 3.97 3.97 3.97 3.97
d
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1
bs
2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55
Close pitch
SEET12T3-CF SEET12T3-EF
Specification of tools
Type Stock R

SEET12T3-DM
Basic dimensions(mm) L D
50 63 80 100 125 160 200 250 315
D1
61 74 91 107 136 170 210 260 325
d
22 22 27 32 40 40 60 60 60
L
40 40 50 50 63 63 63 63 70
apmax
6 6 6 6 6 6 6 6 6
Number of teeth Z
4 5 6 7 8 10 12 14 18
SEET12T3-CM
Type of coupling
A A A B B B C C D
Weight (kg)
0.3 0.5 1.2 1.2 2.6 4.3 7.6 13.5 20.8
SEET12T3-EM SEET12T3-DR SEET12T3-CR
FMA01
-050-A22-SE12-04 -063-A22-SE12-05 -080-A27-SE12-06 -100-B32-SE12-07 -125-B40-SE12-08 -160-B40-SE12-10 -200-C60-SE12-12 -250-C60-SE12-14 -315-D60-SE12-18
SEET12T3-LH
13.4
13.4
3.97
4.1
2.55
SEET12T3-W
17.82
13.4
3.97
4.1
9.46
500
Stock available
Produce according to order
Spare parts
Diameter D
50 -100 125-315
Screw for clamp inserts
Shim
Screw for clamp shim
Wrench
Wrench
Recommended grade and always stock available

I60M3.510 I60M3.512 -S13BS -SM57XA WT15IS -WH35L
Recommended grade and produce according to order

Available grade and produce according to order
Available grade and always stock available
Chipbreaker selection for FMA01 milling inserts

Function / Classification P M, S K For Finishing -DF -EF -CF For Semi-Finishing -DM -EM -CM -LH -CR For Roughing -DR
Applicable tool D14-D18
Tools code key B20-B21
Grade selection guide B15-B19
Technical data B164-B170
AL
Spare parts
Assembly of tools and spare parts
Chipbreaker selection
Tools specification
The tool type, dimension, stock etc.
Tool shape
Applicable tools and tools code key, reference to grade selection, technical data
3 B
Milling
How to select the indexable milling insert
Detailed information for indexable milling inserts
List as per insert shape
Select insert grade as per work-piece material and operating condition The operating condition which indicates applicable material is as the standard for grade selection.
Good working condition: machine works well and stably, higher demands for size
Insert shape and size Insert shape
precision of component and surface quality. Normal working condition: machine works normally, size precision of component and surface quality are required to a certain extend. Bad working condition: machine works with bad stability, demands for high metal removal rate.
AP
Steel Workpiece material Cast iron
Stainless steel
Non-ferrous metal Heat resistant alloy, Ti alloy
Basic dimensions(mm) Insert shape Type L

APKT11T304-PF APKT11T308-PF APKT11T312-PF APKT11T316-PF APKT160408-PF APKT11T304-PM APKT11T308-PM APKT11T312-PM APKT11T316-PM APKT160408-PM APKT11T304-PR APKT11T308-PR APKT11T312-PR APKT11T316-PR APKT160408-PR APKT11T304-LH APKT11T308-LH APKT160408-LH
12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 17.877
CVD Coating
YBM251 YBM351 YBC301 YBD152 YBD252
PVD Coating
Cermet
YNG151C YNG151
Cemented Carbide
YC30S YD051 YD101 YD201
I.W
6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 9.33
S
3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 5.76
d
2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 4.4
r
0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 0.8
Insert grade

Insert shape
Stock condition Insert dimension Insert type
4 B
Milling
Indexable milling tool family Indexable milling tools overview Milling insert grades overview Grade classification for milling inserts Indexable milling tools code key Indexable milling tool series
Face milling Square shoulder milling Profile milling Side and face milling Special milling (high feed) T-slot milling Helical end mills Chamfer milling
B7-B8 B9-B14 B15 B16-B19 B20-B21 B22-B137 B22-B69 B70-B86 B87-B110 B111-B118 B119-B126 B127-B128 B129-B133 B134-B137 B138-B139 B140-B141 B142-B163 B164-B170
Indexable milling inserts overview Indexable milling inserts code key Milling inserts specification Technical information
5 B
Indexable milling tool family
34 11 9 6 27 28 31 30 7
Number 1 2 3 4 5 6 Tool category FMA01 FMA02 FMA03 FMA04(OFKR07) FMA04(OFKT05) FMA05 Page B22 B23 B27 B30 B34 B37 Number 7 8 9 10 11 12 Tool category FMD02 FMD03 FME01 FME02 FME03 FMP01 Page B39 B41 B44 B46 B48 B52 Number 13 14 15 16 17 18 Tool category FMP02 FMR01 FMR02 FMR03 FMR04 EMP01
23 5
10
4 1 2 29
12
Page B54 B60 B63 B65 B67 B70
7 B
25 26
15 16 19 14 33 21 17 13 24
18
20
22
32
8
Number 19 20 21 22 23 24 Tool category EMP02 EMP03 EMP04 EMP05 BMR01 BMR02 Page B77 B80 B81 B85 B87 B90 Number 25 26 27 28 29 30 Tool category BMR03 BMR04 SMP01 SMP03 XMR01(SDMT) XMR01(WPGT) Page B92-103 B104-110 B112-115 B116-118 B119-120 B121-126 Number 31 32 33 34 Tool category TMP01 HMP01(40-50) HMP01(50-80) HMP01 EC(50-80) CM01 Page B127 B129 B130 B131 B134-137
8 B
6 B

Indexable milling tools overview
Milling
Features
Operating pattern
Series/Shape FMA01
Approach angle / Max. cutting depth.

Kr=45 apmax=6.0
B22
Applicable insert
SEET12T3-DF/DM/DR SEET12T3-CF/CM/CR SEET12T3-EF/EM SEET12T3-LH/W SEET12T3-DF/DM/DR
Application overview
General face milling the following material: Steel, alloy steel, stainless steel, cast iron, aluminum alloy, high temperature alloy General face milling the following material: Steel, alloy steel, stainless steel, cast iron, aluminum alloy, high temperature alloy
Diameter range 50-315 Large rake angle designed make cutting more light and fast Wide applications can achieve by using available inserts with different chipbreaker Adopting wiper inserts can improve surface quality Diameter range 50-125 Large rake angle designed make cutting more light and fast Wide applications can achieve by using available inserts with different chipbreaker Coarse and differential pitch, reduce vibration. Diameter range 80-315 Large rake angle designed make cutting more light and fast Top clamping achieves better vibration resistance
FMA02
Kr=45 apmax =6.0
B23
SEET12T3-CF/CM/CR SEET12T3-EF/EM SEET12T3-LH/W
FMA03
Kr=45 apmax=5.5 Kr=45

B27
SEN1203AF SER1203AF SEN1504AF SER1504AF

General face milling steel, stainless steel, cast iron
B
Indexable milling tools
apmax=7.5
FMA04
Kr=45 apmax=3.5
B30 Diameter range 125-315 High economy milling tool with 8 cutting edges Top clamping is easy to assemble and disassemble
OFKT05T3-DF/DM OFKT05T3-LH
Face milling steel, alloy steel, cast iron, aluminum alloy
Diameter range 50-160 High economy milling tool with 8 cutting edges Screw clamping, high precision
Kr=45 apmax =5.0

B34
OFKR0704-DF/DM
Face milling steel, alloy steel and cast iron
Face milling
FMA05

B37
SNKN1204ENN
Face milling cast iron
apmax=5.5
SNKN1504ENN
Diameter range 200-450 Extra close pitch milling tool, rapid feed rate Double negative rake angle, high cutting edge strength High economy milling tool with 8 cutting edges Diameter range 80-315 New milling tool generation with higher feed rate High economy milling tool with 12 cutting edges Top clamping is easy to assemble and disassemble Diameter rang 125-400 Double positive rake angle can reduce the cutting force Suitable for heavy machining with big cutting depth Easy to assemble and clamp inserts
FMD02
Kr=55 apmax=6.0
B39
HNEX090512-DF/DM HNEX090512-DR
FMD03
Kr=60 apmax=17.0
B41
LNKT2510-ZR
Heavy-duty face milling steel and alloy steel
FME01
Kr=75 apmax=8.0
B44
LNE32.534
Diameter range 125-315 Close pitch milling tools Suitable for face milling cast iron parts on large-power machines.
FME02
Kr=75 apmax=6.0
B46
SPKW1204EDFR SPKW1204EDSR SPKT1204EDR
Diameter range 50-125 Kr 75o, general face milling Wide applications can achieve by using inserts with different chipbreakers
Recommended product
9 B
Milling
Operating pattern Series/Shape FME03


Kr=75 apmax=6.0
Applicable insert
SPN1203(1504)ED SPR1203(1504)ED
Features
General face milling steel, alloy steel and cast iron
Kr=75
B48
SPN1504ED SPR1504ED
Diameter range 80-315 Kr 75o, general face milling Top clamping is easy to assemble and disassemble
apmax=8.0
FMP01
B
B52
Kr=90 apmax=18.0
TPN2204PD TPKN2204PDF TPKN2204PDT
Diameter range 80-315 Kr 90 , square shoulder milling Top clamping is easy to assemble and disassemble
Indexable milling tools Indexable milling tools overview
FMP02
Kr=90 apmax=6.7
SEET09T308PER-PF/PM SEET09T308PER-PR
Face milling steel, alloy steel, stainless steel and cast iron
Kr=90 apmax=10.8
B54
SEET120308PER-PF/PM SEET120308PER-PR
Diameter range 50-315 Kr 90, for square shoulder millin Different pitch design: coarse pitch, close pitch and extra close pitch High precision insert, high work-piece surface quality Optimized chipbreaker and grade, for finish machining, semi-finish machining and rough machining.
FMR01
apmax=5.0 RCKT10T3MO-DM
Cavity profile milling steel, alloy steel, stainless steel and cast iron
apmax=6.0
B60
RCKT1204MO-DM/DR
Diameter range 25-50 R-type inserts possess stronger cutting edges Suitable for machining curved surface of mould Economical milling cutters with screw clamping
Face milling
FMR02
apmax=6.0 apmax=8.0 apmax=10.0 apmax=4.0 apmax=5.0 apmax=6.0 apmax=6.0 apmax=8.0 apmax=10.0
RCKT1204MO-DM/DR
Face milling and cavity
RCKT1606MO-DM/DR RCKT2006MO-DR RDKW0803MO
profile milling steel, alloy steel, stainless steel and cast iron
Diameter range 63-200 R-type inserts possess stronger cutting edges Suitable for machining curved surface of mould Economical milling tools with screw clamping
B63
FMR03
Cavity profile milling
RDKW10T3MO RDKW1204MO RDKW1204MO
steel, alloy steel, stainless steel and cast iron
Diameter range 25-50 R-type inserts possess stronger cutting edges Suitable for machining curved surface of mould Economical milling tools with screw clamping
B65
FMR04
Face milling and cavity
RDKW1605MO RDKW2006MO
profile milling steel, alloy steel, stainless steel and cast iron
Diameter range 50-160 R-type inserts possess stronger cutting edge Suitable for machining curved surface of mould
B67
Recommended product
10 B

Milling
Features
Operating pattern
Series/Shape EMP01

Kr=90 apmax=10.5
Applicable insert
APKT11T3-PF/PM/ PR APKT11T3-LH APKT160408- PF/PM/PR APKT160408-LH APKT11T3- PF/PM/ PR APKT11T3-LH APKT160408- PF/PM/PR APKT160408-LH
Multi-function milling steel, alloy steel, stainless steel, cast iron and Al alloy
Kr=90
B70
apmax=15.5
Two mounting modes: Straight shank and Weldon shank, Diameter range 12-63 Kr 90 , for square shoulder milling, slot milling, ramp milling etc. Wiper inserts also suitable for face milling. Inserts with 3D helical cutting edge, less cutting force
EMP02

B77
Face milling steel, alloy steel, stainless steel, cast iron and Al alloy
Diameter range 50-100 Kr 90 , for square shoulder milling Wiper inserts also suitable for face milling. Inserts with 3D helical cutting edge, less cutting force
apmax=15.5
EMP03
Kr=90 apmax=39.0
B80
B
Square shoulder milling
Adopting large
APKT11T3-PF/PM/ PR APKT11T3-LH
cutting depth, for milling steel, alloy steel, stainless steel, cast iron and Al alloy Adopting large
Diameter range 50-100 End milling tools with positive helical angle, good chip removal For side face milling and slot machining Close pitch, high machining efficiency.
EMP04
Kr=90 apmax=58.0 APKT11T3-PF/PM/ PR APKT11T3-LH
B81
cutting depth, for milling steel, alloy steel, stainless steel, cast iron and Al alloy
Diameter range 20-40 End milling tools with positive helical angle, good chip removal For side face milling and slot machining Close pitch, high machining efficiency.
EMP05
Kr=90 apmax=40.0
B85
Multi-function drilling
APMT1135PDR APMT160408PDER
and milling steel alloy steel, stainless steel and cast iron
Diameter range 25-40 End edge over center, for drilling directly
Recommended product
11 B
Milling
Operating pattern Series/Shape BMR01

Approach angle / Applicable insert Max. cutting depth.

ZDETCYR ZPNT2204CYR SPMT060304
B87
Profile machining steel, stainless steel and cast iron
Features
Diameter range 20-63 Very suitable for rough machining large mold Ball nose cutter with 3-cutting-edges inserts, perfect economical efficiency
SDMT
BMR02
Profile machining steel,
ROHX
stainless steel and cast iron
B
Diameter range 12-20 Applied for profile finish machining Good assembly stability. Insert with two cutting edges, perfect economical efficiency.
B90
BMR03
B92
Cutting B93 depth: see the detailed information about tool specifications B94 Profile machining steel, Diameter range 16-50 Very suitable for rough machining moulds Equipped with complicated 3D chipbreaker inserts, high circular edge precision. Tool body with high rigidity
Profile milling BMR04
XPHTR- GM
B95
B104
Profile machining steel,
ZOHX
Diameter range 10-40 High precision, for finish profile machining. Two types of chipbreaker, used in different machining condition High assembling precision, good stability.
B105
Recommended product
12 B

Milling
Features
Diameter range 100-250 Two mounting types: mounting by keyway and Arbor mounting Groove width range : 4, 5, 6, 7, 8mm
Operating pattern
Series/Shape SMP01
Approach angle / Max. Applicable insert cutting depth.
B112
Slot milling steel,
XSEQ12
stainless steel and cast iron.
Side and face milling Special milling (high feed) T-slot milling
Cutting depth: see B113 the detailed information about tool specifications B116 Diameter range 80-250 Slot milling steel, Two mounting types: mounting by keyway and Arbor mounting Groove width range : 8, 10, 12, 16, 18, 20mm
SMP03
B
MPHT
stainless steel and cast iron.
B117
XMR01
Diameter range 25-100 Two mounting types: Straight shank B119 Face and profile and Arbor mounting The cutting forces are decomposed effectively, realize cutting with high feed rate. For plunge milling Double clamping, firm and reliable. milling steel, stainless steel and cast iron in cavity applications Cutting B119 depth: see the detailed information about tool specifications B121 Face and profile Diameter range 20-100 Two mounting types: Straight shank and Arbor mounting The cutting forces are decomposed effectively, realize cutting with high feed rate. Double clamping, firm and reliable. B122
SDMT-DM
WPGTZSR
milling steel, stainless steel and cast iron in cavity applications
TMP01
Kr=90
B127
Diameter range 21-60
MPHT
Machining T slot in cast iron
Machining the T-slot with size range 12, 14, 18, 22, 28, 36. 86 rhombic inserts with positive angle are used.
Recommended product
13 B
Milling
Operating pattern Series/Shape HMP01

Approach angle / Applicable insert Max. cutting depth.
Features
Kr=90 apmax=55
B129
Helical end mills
Diameter range 40-80 Milling steel, alloy Coarse and differential pitch, less vibration Holistic structure with good rigidity, interchangeable heads achieve high economical efficiency.
B
Kr=90 apmax=144
B130
APKT150412-ZM SPMT120408-ZM
steel and cast iron with large cutting depth.
HMP01 EC
Kr=90 apmax=144
B131
CMZ01
Kr=30
B134
CMA01
Kr=45 SPMT120408
Chamfer milling
Chamfer machining steel, alloy steel, stainless steel and cast iron B135
Diameter range 12, 25, 32, 36 With the function of milling small surface
CMD01
Kr=60
B136
Recommended product
14 B
Milling
Cemented carbide PCBN and PCD material
Milling insert grades overview

Workpiece ISO material code
Coating CVD PVD
Cermet
YBC301
YBM251
P20 P30 P40
YBG202
YBG252
P
Steel
P10
YBG302
YBM351
YNG151
YNG151C
P01
YBM351
M20 M30 M40 K01
YBG202
YBM251
YBG252
M10
YNG151
YNG151C
M
Stainless steel
M01
B
Milling insert grades overview
YC30S
YBG302
YC30S
YBG102
YBD252
K30 K40
N30 S01 S10 S20 S30 H01 H10 H20 H30

YBG202
S
Heat resistant alloy & Ti alloy
YCB012
H
Super hard material
YD201
N20
YD101
N10
YCD011
N
Non ferrous metal
N01
YBG152
YD201
K20
YBG252
YBD152
YD051
K10
YNG151
K
Cast iron
YNG151C
YCB011
15 B
Milling
Coated Cemented Carbide CVD
Component shape Machine and cooling Workpiece material and hardness Type of machining Applicable tool Applicable insert Cutting parameters
4 3

Grade classification for milling inserts
Grade
Coating structure
Combination of high toughness and strength substrate and the coating comprised of TiCN, thin Al2O3, TiN Combination of high toughness and strength substrate and the coating comprised of TiCN, thin Al2O3, TiN Combination of high toughness substrate and the coating composed of TiCN, thin Al2O3, TiN Good combination of substrate with high wearresistance and TiCN, thick Al2O3 coating Good combination of substrate with high wearresistance and TiCN, thick Al2O3 coating
Micro-structure
ISO applied range
Application field
Applicable for semi-finish and rough milling P type material
YBC301
P15~35
P15~40 M10~30 P25~40 M20~35
YBM251
Applicable for semi-finish and rough milling P, M type materials
B
YBM351
Applicable for rough milling P, M type materials
YBD152
K05~25
Applicable for finish and semi-finish milling K type material
YBD252
K15~35
Applicable for rough and semi-finish milling K type material
Application case
NC plane milling machine, wet machining Casting stainless steel HB220-260 Milling surface FMA04-200-C60-OF07-12 YBM251/OFKR0704-DM Vc=120m/min, fz=0.15mm/z, ap=2mm
5 4 3
Vertical machining center, dry machining #45 Forged steel HB240-270 Milling surface FMA01-125-B40-SE12-08 YBM351/SEET12T3-DR Vc=212m/min, fz=0.2mm/z, ap=3mm
Horizontal machining center, dry machining HT250 HB220 Milling surface FMP02-100-B32-SE12-07 YBD252/SEET120308PER-PM Vc=160m/min, fz=0.2mm/z, ap=1.5mm
Application results
2 1 0
A company
2 1 0
A company
A company
Number of workpiece machined
16 B

Milling
Application field
Applicable for finish and semi-finish milling K type material
Component shape
Machine and cooling Workpiece material and hardness Type of machining Applicable tool Applicable insert Cutting parameters
Application results
Coated Cemented Carbide PVD
Grade
Coating structure
Fine grain carbide substrate + Nano coating
ISO applied range
YBG102
K05~K20
Carbide substrate with
P10~30 M10~30 S05~20 P 25~40 M 25~40 K 20~35
PVD grade with wide application, widely applicable for semi-finish milling type P, M, S materials
YBG202
excellent deformation resistance + Nano coating
YBG302
Substrate with good toughness and strength + Nano coating
Applicable for rough milling type P and M materials
B
Substrate with reasonable
YBG152
hardness and strength+ Nano coating
Applicable for rough and semi-finish milling type K material
Application case
Machining center, dry cutting Nodular cast iron HB 220 Milling surface EMP02-050-A22-AP11-06 YBG102/APKT11T308-PM
Plane milling machine, dry cutting 7CrSiMoV HRC25 Cavity milling BMR03-050-MT5-M YBG302/XPHT50R2507- GM
Vc=235m/min, fz=0.15mm/z, ap=1~3mm
Vc=120m/min,
fz=0.25mm/z, ap=8mm
A company
A company
17 B
Milling

Cermet
B
Grade classification for milling inserts Indexable milling tools Component shape Machine and cooling Workpiece material and hardness Type of machining Applicable tool Applicable insert Cutting parameters Application results
Grade
Coating structure
ISO applied range P05~20
Application field
YNG151
M05~20 K05~20 P01~20
Wide application of finish milling P, M, K type materials
YNG151C
M01~20 K01~20
Wide application of finish milling P, M, K type materials
Application case
Machining center, dry cutting #45 steel HB 170~220
Machining center, dry cutting NAK80 HRC42~48 Finish milling surface FME03-160-B40-SP12-10 YNG151C/SPEN1203EDER
Finish milling surface FMA03-160-B40-SE12-08 YNG151/SEEN1203AFTN
Vc=400m/min,
fz=0.1mm/z,
ap=0.3mm
Vc=420m/min,
40 30
fz=0.12mm/z,
ap=0.35mm
A company
20 10
A company
18 B

Milling
Application field
Applicable for rough milling P, M type materials
Machine and cooling Workpiece material and hardness Type of machining Applicable tool Applicable insert Cutting parameters
Cemented Carbide
Component shape Application results
Grade
Coating structure
ISO applied range P25~40
YC30S M25~40
YD051
K05~20
Applicable for finish milling type K material
YD101
N05~25
Applicable for semi-finish and finish milling type N material
B
K15~35 YD201 N15~30
Applicable for rough and semifinish type K material, and for rough milling type N material
Application case
Vertical machining center, wet machining Aluminum alloy HB100 Milling surface FMA01-100-B32-SE12-07 YD101/SEET12T3-LH Vc=300-350m/min, ap=1-2mm, fz=0.2mm/z
Plane milling machine, wet machining 40CrMnMo HB240 Milling surface FMP01-100-B32-TP22-06 YC30S/TPKN2204PDR Vc=170m/min, ap=5-7mm fz=0.3mm/z
40 30
plane milling machine, dry cutting HT250 HB220 Milling surface FME03-160-B40-SP15-10 YD201/SPKN1504EDTR Vc=100-130m/min, ap=7mm, fz=0.35mm/z
A company
A company 20
10
A company
19 B
Milling
Cutter type
Face milling Square shoulder milling Helical end milling Side and face milling
Indexable milling tools code key

Approach angle Sequence number of series Cutting diameter D
Side and face milling tool : diameter X cutting edge width
Coupling structure and type

(as follow figure) A type of coupling B type of coupling C type of coupling D type of coupling Weldon shank Straight shank Morse adapter with a conical hole and without a flat tail
B
Profile milling Chamfer milling Special milling T-slot milling
Coupling size(mm)
(as follow figure)
Coupling structure of Arbor
B type of coupling
A type of coupling
50- 80 Arbor face mill as per GB5342-96
C type of coupling
Regarding to the Weldon shank, straight shank and Morse taper shank etc coupling method, please refer to the technical data of tooling systems
D type of coupling
D315 Arbor face mill as per GB5342-96
20 B
Milling
Insert shape
Insert shape
Insert clearance angle
Length of cutting edge

Diameter of IC
B
(number of flute when it's helical end mills)
Number of teeth
(R: Right
Cutting direction
L: Left It's right when default)
21 B
Milling
FMA01
Face milling tools
Kr:45o
B
Close pitch
C type of coupling
D type of coupling
Indexable milling tools Face milling tools
Type Stock R

50 63 80 100 125 160 200 250 315
D1
61 74 91 107 136 170 210 260 325
d
22 22 27 32 40 40 60 60 60
L
40 40 50 50 63 63 63 63 70
apmax
6 6 6 6 6 6 6 6 6
Number of teeth Z
4 5 6 7 8 10 12 14 18
Type of coupling
A A A B B B C C D
Weight (kg)
0.3 0.5 1.2 1.2 2.6 4.3 7.6 13.5 20.8
FMA01
-050-A22-SE12-04 -063-A22-SE12-05 -080-A27-SE12-06 -100-B32-SE12-07 -125-B40-SE12-08 -160-B40-SE12-10 -200-C60-SE12-12 -250-C60-SE12-14 -315-D60-SE12-18
Stock available
Spare parts
Diameter D
50 -100 125-315
Insert screw
Shim
Shim screw
Wrench
Wrench
I60M3.510 I60M3.512
-S13BS
-SM57XA
WT15IS
-WH35L
22 B
Milling
B type of coupling
Face milling tools
Kr:45o
FMA02
A type of coupling
Coarse and differential pitch
Type Stock R

B
Face milling tools
50 63 80 100 125
D1
61 74 91 107 131
d
22 22 27 32 40
L
40 40 50 50 63
apmax
6 6 6 6 6
Number of teeth Z
3 4 4 5 6
Type of coupling
A A A B B
Weight (kg)
0.4 0.6 1.3 1.3 2.6
FMA02
-050-A22-SE12-03 -063-A22-SE12-04 -080-A27-SE12-04 -100-B32-SE12-05 -125-B40-SE12-06
Stock available
Spare parts
Diameter D
50-125
Insert screw
Wrench
I60M3.510
WT15IS
23 B
Milling
Good working condition Steel Stainless steel Cast iron Non-ferrous metal Heat resistant alloy, Ti alloy Workpiece material
CVD Coating
YBC301 YBM251 YBM351 YBD152 YBD252
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
Insert shape
Type L
SEET12T3-DF SEET12T3-CF SEET12T3-EF SEET12T3-DM SEET12T3-CM SEET12T3-EM SEET12T3-DR SEET12T3-CR
13.4 13.4 13.4 13.4 13.4 13.4 13.4 13.4
I.C
13.4 13.4 13.4 13.4 13.4 13.4 13.4 13.4
S
3.97 3.97 3.97 3.97 3.97 3.97 3.97 3.97
d
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1
bs
2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55
SEET12T3-LH
13.4
13.4
3.97
4.1
2.55
SEET12T3-W
17.82
13.4
3.97
4.1
9.46
500

24 B

Classification / Function P M, S K AL For finishing -DF -EF -CF For semi-finishing -DM -EM -CM -LH
Milling
For roughing -DR
-CR
Recommended cutting parameters

Cutting parameters Workpiece material Hardness HB Insert grade
YBM251 YBC301 180 YBG202 YBG302 YBM251 YBC301 180-280 YBG202 YBG302 YBM251 YBC301 Alloy tool steel 280-350 YBG202 YBG302
B
Face milling tools
V(m/min)
270(220-350) 270(200-360) 230(170-350) 240 (200-320) 240 (180-350) 220 (150-330) 220 (180-300) 220 (170-340) 190 (130-300)
f(mm/z) -DF
0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2)
-DM
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
-DR
0.3(0.2-0.4) 0.3(0.2-0.4) 0.3(0.2-0.4) 0.3(0.2-0.4) 0.3(0.2-0.4) 0.3(0.2-0.4) 0.3(0.2-0.4) 0.3(0.2-0.4) 0.3(0.2-0.4)
Low-carbon steel Soft steel
High-carbon steel Alloy steel
-EF
-EM
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
M K N S
YBM251 Stainless steel 270 YBG202 YBG302
150 (120-240) 160 (110-270) 140 (100-250)
0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2)
-CF
Cast iron 180-250 YBG102 YBD152 210 (120-300) 240 (180-300) 0.15(0.1-0.2) 0.15(0.1-0.2)
-CM
0.2 (0.1-0.3) 0.2 (0.1-0.3)
-CR 0.3(0.2-0.4) 0.3(0.2-0.4)
-LH
Al alloy YD101 YD201 3003000.25 (0.1-0.4)
-EF
High temperature alloy 400 YBG102 YBG202 50(20-60) 40(20-50) 0.1 (0.1-0.2) 0.1 (0.1-0.2)
-EM
0.15 (0.1-0.3) 0.15 (0.1-0.3)
25 B
Milling
Case for FMA01 series

Workpiece material1Cr18Ni9Ti (HB180) Cooling system: dry cutting Machine: vertical machining center Cutting parameters Vc=160m/min ap=1mm fz=0.2mm/z ae=60mm
B
Face milling tools
Tool typeFMA01-080-A27-SE12-06 Insert type/gradeSEET12T3-DM/YBG202
Surface roughness of workpiece
Comparison of insert abrasion
:Ra1.2 Other company product: Ra1.6
Other company product
17'30''
29'30''
33'30''
26 B
Indexable Milling Tools Face milling tools
Milling
B type of coupling
Kr:45o
A type of coupling
FMA03
C type of coupling
D type of coupling
B
Face milling tools
Type Stock R

80 100 125 160 200 250 315 80 100 125 160 200 250 315
D1
103 122 147 181 221 270 353 103 122 147 181 221 270 353
d
27 32 40 40 60 60 60 27 32 40 40 60 60 60
L
50 50 63 63 63 63 63 50 50 63 63 63 63 63
apmax
5.5 5.5 5.5 5.5 5.5 5.5 5.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
Number of teeth Z
4 5 6 8 10 12 15 4 5 6 8 10 12 15
Type of coupling
A B B B C C D A B B B C C D
Weight (kg)
1.8 2.4 4.4 6.4 8.5 14.1 22.2 1.7 2.3 4.2 6.1 8.3 13.6 21.8
FMA03
-080-A27-SE12-04 -100-B32-SE12-05 -125-B40-SE12-06 -160-B40-SE12-08 -200-C60-SE12-10 -250-C60-SE12-12 -315-D60-SE12-15 -080-A27-SE15-04 -100-B32-SE15-05 -125-B40-SE15-06 -160-B40-SE15-08 -200-C60-SE15-10 -250-C60-SE15-12 -315-D60-SE15-15
Stock available
Spare parts
Diameter D
80-315 80-315
Locator Inserts
SE12 SE15 LSE12R/L LSE15R/L
Wedge
Wedge screw Locator screw
Wrench
W01R/L
DM821X
LOM515.1
WT20T WH40T
27 B
Milling
bs

SEEN1203AFTN SEKN1203AFFN SEKN1203AFN SEKN1203AFTN SEKR1203AFN
12.7 12.7 12.7 12.7 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
12.7 12.7 12.7 12.7 12.7
S
3.18 3.18 3.18 3.18 3.18
bs
1.8 1.8 1.8 1.8 1.8
SEKN1504AFN SEKN1504AFTN
15.875 15.875
15.875 15.875
4.76 4.76
1.6 1.6
SEKR1504AFN
15.875
15.875
4.76
1.6

28 B

Workpiece material Hardness HB Insert grade
YNG151 YBM251 YBC301 180 YBM351 YBG202 YC30S
Milling
f(mm/z)
0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.2 (0.1-0.3) 0.27 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.2 (0.1-0.3) 0.27 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.2 (0.1-0.3) 0.27 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.4) 0.25 (0.1-0.4)
Cutting parameters V(m/min)

430 (340-500) 270 (220-350) 220 (180-300) 270 (200-360) 140 (100-220) 400 (320-480) 240 (200-320) 200 (160-280) 240 (180-350) 120 (80-200) 350 (300-450) 220 (180-300) 180 (150-250) 220 (170-340) 100 (60-180) 220 (160-280) 130 (100-220) 140 (100-240) 140 (100-250) 210 (120-300) 200 (150-250) 100 (80-160)
P
High-carbon steel Alloy steel 180-280
YNG151 YBM251 YBC301 YBM351 YBG202 YC30S YNG151 YBM251 YBC301 Alloy tool steel 280-350 YBM351 YBG202 YC30S YNG151
B
Face milling tools
M K
Stainless steel
270
YBM251 YBM351 YBG202 YBG102
Cast iron
180-250
YBD252 YD201
29 B
Milling
FMA04
Face milling tools
Kr:45o
B
Face milling tools
C type of coupling
Screw clamping
Type Stock R

50 50 63 80 100 125 160 160
D1
56 56 69 86 106 130 165 165
d
22 22 22 27 32 40 40 40
L
40 40 40 50 50 63 63 63
apmax
3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Number of teeth Z
4 5 5 6 7 8 10 10
Type of coupling
A A A A B B B C
Weight (kg)
0.3 0.4 0.5 0.8 1.2 2.7 5.1 4.1
FMA04
-050-A22-OF05-04 -050-A22-OF05-05 -063-A22-OF05-05 -080-A27-OF05-06 -100-B32-OF05-07 -125-B40-OF05-08 -160-B40-OF05-10 -160-C40-OF05-10
Stock available
Spare parts
Diameter D
50- 63 80 -160
Insert screw
Wrench
I60M48.4 I60M410
WT15IS
30 B

Steel Stainless steel Cast iron Non-ferrous metal Heat resistant alloy, Ti alloy Workpiece material
Milling

OFKT05T3-DF
5.26
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7
S
3.97
d
4.4
R
0.5
B
Face milling tools
OFKT05T3-DM
5.26
12.7
3.97
4.4
0.5
OFKT05T3-LH
5.26
12.7
3.97
4.4
0.5


Classification / Function P M K AL -LH -DF -DM For finishing For semi-finishing
31 B
Milling
Workpiece material

Cutting parameters Hardness HB Insert grade V(m/min)
270 (220-350) 270 (200-360) 220 (180-300) 230 (170-350) 240 (200-320) 240 (180-350) 200 (160-280) 220 (150-330) 220 (180-300) 220 (170-340) 180 (150-250) 190 (130-300) 160 (110-270) 140 (100-250) 150 (120-250) 210 (120-300)
f(mm/z) -DF
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.2 (0.1-0.3) -LH
-DM
0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.1-0.4)
YBM251 Low-carbon steel Soft steel 180 YBG202 YBM351 YBG302
B
Face milling tools
YBM251
180-280
YBG202 YBM351 YBG302 YBM251
Alloy tool steel
280-350
YBG202 YBM351 YBG302
M K N
YBG202 Stainless steel 270 YBG302 YBM251 Cast iron 180-250 YBG102
Al alloy
YD101
300-
0.15 (0.05-0.3)
32 B

Case for FMA04 series
Workpiece material42CrMo (HB200) Cooling system: dry cutting Machine: vertical machining center Cutting parameters Vc=180m/min ap=1mm fz=0.2mm/z ae=60mm
Milling
Tool typeFMA04-100-B32-OF05-07 Insert type/gradeOFKT05T3-DM/YBG202
B
Face milling tools
:Ra1.2 Other company productRa1.6
Surface roughness of workpiece

Flank abrasion VB(mm)
0.1
Time
33 B
Milling
FMA04
Face milling tools
Kr:45o
B type of coupling
B
Face milling tools
C type of coupling
D type of coupling
Top clamping
Type Stock R

125 160 200 250 315
D1
136 171 211 261 321
d
40 40 60 60 60
L
63 63 63 63 63
apmax
5 5 5 5 5
Number of teeth Z
8 10 12 16 20
Type of coupling
B B C C D
Weight (kg)
3.9 5.9 7.6 13.3 20.3
FMA04
-125-B40-OF07-08 -160-B40-OF07-10 -200-C60-OF07-12 -250-C60-OF07-16 -315-D60-OF07-20
Stock available
Spare parts
Diameter D
125-315
Locator
Wedge
Wedge screw
Locator screw
Wrench
LOF07R/L
W02R/L
DM821X
LOM515.1
WT20T WH40T
34 B

Milling

OFKR0704-DF
7.45
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
17.94
S
4.76
R
0.8
B
Face milling tools
OFKR0704-DM
7.45
17.94
4.76
0.8


Classification / Function P M K -DF -DM For finishing For semi-finishing
35 B
Milling
Workpiece material

Cutting parameters Hardness HB Insert grade
YBM251 YBC301 Low-carbon steel Soft steel 180 YBG202 YBM351 YBG302
V(m/min)
270 (220-350) 270 (200-360) 220 (180-300) 230 (170-350) 240 (200-320) 240 (180-350) 200 (160-280) 220 (150-330) 220 (180-300) 220 (170-340) 180 (150-250) 190 (130-300) 160 (110-270) 140 (100-250) 150 (120-250) 210 (120-300) 200 (150-250)
f(mm/z) -DF
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.15 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
-DM
0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.1-0.4) 0.25 (0.1-0.4)
B
Face milling tools
YBM251 YBC301
180-280
YBG202 YBM351 YBG302 YBM251 YBC301 YBG202 YBM351 YBG302
Alloy tool steel
280-350
M K
YBG202 Stainless steel 270 YBG302 YBM251 Cast iron 180-250 YBG102 YBD252
36 B
Milling
Kr:45o
C type of coupling
FMA05
D type of coupling
B
Face milling tools
Type Stock R

200 250 315 355 400 450 200 250 315 355 400 450
D1
215 265 330 370 415 465 220 270 335 375 420 470
d
80 120 180 220 250 300 80 120 180 220 250 300
L
40 40 40 40 40 40 40 40 40 40 40 40
apmax
5 5 5 5 5 5 5.5 5.5 5.5 5.5 5.5 5.5
Number of teeth Z
18 24 30 34 38 44 18 24 30 34 38 44
Adapter type
Adapter1 Adapter2 Adapter3 Adapter4 Adapter5 Adapter6 Adapter1 Adapter2 Adapter3 Adapter4 Adapter5 Adapter6
Weight (kg)
6.9 9.4 12.5 15.1 18.4 21.7 6.9 9.4 12.6 15.2 18.4 21.8
FMA05
-200-C60-SN12-18 -250-C60-SN12-24 -315-D60-SN12-30 -355-D60-SN12-34 -400-D60-SN12-38 -450-D60-SN12-44 -200-C60-SN15-18 -250-C60-SN15-24 -315-D60-SN15-30 -355-D60-SN15-34 -400-D60-SN15-38 -450-D60-SN15-44
Stock available
Spare parts
Diameter D Wedge Inserts
SN12 SN15 W04N W05N
Wedge screw
Wrench
200-450
DM821X
WH40T
37 B
Milling

SNKN1204ENN
12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
12.7
S
4.76
be
0.9
bs
1.5
SNKN1504ENN
15.875 15.875
4.76
0.9
1.5

Mounting structure specification of FMA05 series

Adapter Basic dimensions(mm) Type
Adapter1 Adapter2 Adapter3 Adapter4 Adapter5 Adapter6 D 180 230 290 330 370 420 d 60 60 60 60 60 60 d1 26 26 26 26 26 26 d2 18 18 18 18 18 18 d3 --32 32 32 32 d4 --22 22 22 22 d5 80 120 180 220 250 300 C C1 C2 --N 4 4 6 6 6 6 Tools D 200 250 315 355 400 450
120 101.6 170 101.6
230 101.6 177.8 270 101.6 177.8 300 101.6 177.8 350 101.6 177.8

Workpiece material High temperature alloy tool steel Alloy steel Hardness HB Insert grade
YBC301 YC30S YBC301 YC30S YBD152 YD201

120 (100-180) 100 (80-150) 100 (80-180) 80 (60-120) 150 (110-190) 100 (80-160)
f(mm/z)
0.25 (0.1-0.4) 0.25 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.2 (0.1-0.4) 0.25 (0.1-0.4)
P K
180-280
280-350
Cast iron
180-250
38 B

Kr:55o
A type of coupling
Milling
B type of coupling
FMD02
C type of coupling
D type of coupling
B
Face milling tools
Type Stock R

80 100 125 160 200 250 315
d
27 32 40 40 60 60 60
L
50 63 70 63 63 63 63
apmax
6 6 6 6 6 6 6
Number of teeth Z
8 10 14 18 22 28 32
Type of coupling
A B B B C C D
Weight (kg)
1.1 2.6 3.7 5.6 6.3 10.3 21.7
FMD02
-080-A27-HN09-08 -100-B32-HN09-10 -125-B40-HN09-14 -160-B40-HN09-18 -200-C60-HN09-22 -250-C60-HN09-28 -315-D60-HN09-32
Stock available
Spare parts
Diameter D
80-315
Wedge
Wedge screw
Wrench
W06T
DM625
WH30T
39 B
Milling

HNEX090512-DF
9.16
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
15.875
S
5.56
r
1.2
HNEX090512-DM
9.16
15.875
5.56
1.2
HNEX090512-DR
9.16
15.875
5.56
1.2

Chipbreaker selection for FMD02 milling inserts

Classification / Function K For finishing -DF For semi-finishing -DM For roughing -DR

Cutting parameters Workpiece material Hardness HB Insert grade V(m/min)
180 (110-250) 130 (110-200)
f(mm/z) -DF
0.15(0.1-0.2) 0.2(0.1-0.2)
-DM
0.2 (0.1-0.3) 0.25 (0.1-0.3)
-DR 0.3(0.2-0.5) 0.3(0.2-0.5)
Cast iron
180-250
YBD152 YBD252
40 B
Milling
B type of coupling
Kr:60o
FMD03
C type of coupling
D type of coupling
B
Face milling tools
Type Stock

Basic dimensions(mm) D
125 160 200 250 315 400
D1
154 189 229 278 346 427
d
40 40 60 60 60 60
L
63 63 70 70 80 80
apmax
17 17 17 17 17 17
Number of Type of teeth coupling Z

5 6 8 10 12 16 B C C C D D
Weight (kg)
4.5 6.9 10.5 16.7 27.3 47.1
FMD03
-125-B40-LN25-05 -160-C40-LN25-06 -200-C60-LN25-08 -250-C60-LN25-10 -315-D60-LN25-12 -400-D60-LN25-16
Stock available
Spare parts
Diameter D
125-400
Insert screw
Shim
Shim screw
Wrench
I60M517
LLN25R-ZR
I60M3.510.4
WT15IS
WT20IT
41 B
Milling

LNKT2510-ZR
25
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.W
18
S
9.525
d
5.5


Workpiece material
Hardness HB
Insert grade
YBG302 YBM351 YBG302 YBM351 YBG302 YBM351 YBG302 YBM351

180 (150-300) 180 (150-300) 150 (120-280) 140 (120-280) 120 (80-250) 100 (80-250) 120 (80-200) 100 (80-200)
f(mm/z)
0.5 (0.2-0.8) 0.5 (0.2-0.8) 0.5 (0.2-0.8) 0.5 (0.2-0.8) 0.45 (0.2-0.6) 0.45 (0.2-0.6) 0.45 (0.2-0.6) 0.45 (0.2-0.6)
180
P M
180-280
Alloy tool steel
280-350
Stainless steel
270
Note: please adjust the cutting parameters stated above according to machine Max. power
42 B

Case for FMD03 series
Milling
Workpiece materialASTMA743 CA-6NM class(HB200) Cooling system: dry cutting Machine: NC oor type boring and milling machine, spindle power30KW Cutting parameters Vc=120m/min ap=12mm fz=0.55mm/z ae=230mm
Tool typeFMD03-315-D60-LN25-12 Insert type/gradeLNKT2510-ZR/YBG302
B
Face milling tools
Comparison of machining time

Time
Similar product of company A
43 B
Milling
FME01
Face milling tools
Kr:75o
B type of coupling
B
Type Stock R

C type of coupling
D type of coupling
125 160 200 250 315
D1
132 168 208 257 323
d
40 40 60 60 60
L
63 63 63 63 70
apmax
8 8 8 8 8
Number of teeth Z
16 20 25 32 40
Type of coupling
B B C C D
Weight (kg)
3.5 6.1 7.4 13.1 25.5
FME01
-125-B40-LN15-16 -160-B40-LN15-20 -200-C60-LN15-25 -250-C60-LN15-32 -315-D60-LN15-40
Stock available
Spare parts
Diameter D
125-315
Insert screw
Wrench
I90M411
WT09S
44 B

Milling

LNE32.534
15.875
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.W
9.525
S
4.76
d
4.4
r
1.6
B
Face milling tools


Workpiece material Hardness HB Insert grade Cutting parameters V(m/min)
150 (110-190)
f(mm/z)
0.2 (0.1-0.4)
Cast iron
180-250
YBD152
45 B
Milling
FME02
Face milling tools
Kr:75o
B
Face milling tools
Type Stock

50 63 80 100 125
D1
54 66 83 103 128
d
22 22 27 32 40
L
40 50 50 50 63
apmax
6 6 6 6 6

4 5 6 7 8 A A A B B
Weight (kg)
0.3 0.6 0.9 1.4 2.5
FME02
-050-A22-SP12-04 -063-A22-SP12-05 -080-A27-SP12-06 -100-B32-SP12-07 -125-B40-SP12-08
Stock available
Spare parts
Diameter D
50-125
Insert screw
Wrench
I60M513.2
WT20IS
46 B

Milling

SPKW1204EDFR SPKW1204EDSR
12.7 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7
S
4.76 4.76
d
5.56 5.56
B
Face milling tools
SPKT1204EDR
12.7
12.7
4.76
5.56

Cutting edge treatment selection for FME02 milling inserts

Classification / Function P M K For finishing EDFR EDFR EDFR For semi-finishing EDR EDR EDR For roughing EDSR

Workpiece material
Hardness HB
180 180-280 280-350 270
Insert grade
YBG202 YBG202 YBG202 YBG202

270(200-360) 240 (180-350) 220 (170-340) 160 (110-270)
f(mm/z)
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
P M K
High-carbon steel Alloy steel Alloy tool steel
Stainless steel
Cast iron
180-250
YBG202
160 (120-200)
0.2 (0.1-0.3)
47 B
Milling
FME03
Face milling tools
Kr:75o
B
Type Stock R

C type of coupling
D type of coupling
80 100 125 160 200 250 315 80 100 125 160 200 250 315
D1
84 104 129 164 203 253 318 84 104 129 164 204 253 318
d
27 32 40 40 60 60 60 27 27 40 40 60 60 60
L
50 50 63 63 63 63 70 50 50 63 63 63 63 70
apmax
6 6 6 6 6 6 6 8 8 8 8 8 8 8
Number of teeth Z
4 6 8 10 12 16 20 4 6 8 10 12 16 20
Type of coupling
A B B B C C D A B B B C C D
Weight (kg)
1.1 1.9 3.5 5.7 8.2 13.8 23.5 1.0 1.8 3.3 5.4 7.9 13.6 23.1
FME03
-080-A27-SP12-04 -100-B32-SP12-06 -125-B40-SP12-08 -160-B40-SP12-10 -200-C60-SP12-12 -250-C60-SP12-16 -315-D60-SP12-20 -080-A27-SP15-04 -100-B27-SP15-06 -125-B40-SP15-08 -160-B40-SP15-10 -200-C60-SP15-12 -250-C60-SP15-16 -315-D60-SP15-20
Stock available
Spare parts
Diameter D
80-100 125-315 80-315
Locator Insert
Wedge
Wedge screw Locator screw
Wrench
SP12 SP15
LSP12R/L LSP15R/L
W04R/L W04R/L
WM817 WM822 WM822 LOM515.1 WT20T WT25T
48 B

Milling

SPKN1203EDER SPKN1203EDEL SPKN1203EDFR SPKN1203EDFL SPKN1203EDSKR SPKN1203EDSKL SPKN1203EDTKR SPKN1203EDTKL SPKN1203EDS31R SPKN1203EDS31L SPKN1203EDT31R SPKN1203EDT31L SPKR1203EDR-GM SPKR1203EDL-GM
12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7
S
3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
be
1 1 1 1 1 1 1 1 1 1 1 1 1 1
bs
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
B
Face milling tools
SPKN1504EDER SPKN1504EDEL SPKN1504EDFR SPKN1504EDFL SPKN1504EDSKR SPKN1504EDSKL SPKN1504EDTKR SPKN1504EDTKL
15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875
15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875
4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76
1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
SPKN1504EDS32R 15.875 SPKN1504EDS32L 15.875 SPKN1504EDT32R 15.875 SPKN1504EDT32L 15.875 SPKR1504EDR-GM 15.875 SPKR1504EDL-GM 15.875

Order guide: SPKN1203EDT3

1R chamfering angle 20, chamfering width 0.15mm. if order other edge shape, see the inserts code key standard
49 B
Milling
Basic dimensions(mm) Insert shape Type A

SPEX1203EDL-1 SPEX1203EDR-1 SPEX1504EDL-1 SPEX1504EDR-1
15 15
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
12.7 12.7
I.W
12.7 12.7
S 3.18
3.18
bs
10 10 10 10
R
500 500 500 500
Wiper inserts
18.2 15.875 15.875 4.76 18.2 15.875 15.875 4.76

Cutting edge treatment selection for FME03 milling inserts

Treatment method of cutting edge
SPEDER/L SPEDFR/L
Recommended selection
Honing edge is suitable for semi-finish and finish machining steel and stainless steel.
Sharp cutting edge is suitable for finish machining cast iron materials.
SPEDSKR/L SPEDSR/L
After chamfering and honing, the edge has strong capability of anti-breakage, suitable for rough machining steel parts in poor conditions.
SPEDTKR/L SPEDTR/L
Chamfering edge is suitable for semi-finish and finish machining steel, stainless steel and cast iron materials.
SPEDR/L-GM
3D chipbreaker to reduce cutting force, reinforce the capability of chip control, improve insert life. Widely applied for semi-finish machining steel, stainless steel and cast iron materials.
50 B
Milling
f(mm/z)
0.2 (0.1-0.4) 0.24 (0.1-0.3) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.22 (0.1-0.3) 0.2 (0.1-0.3) 0.24 (0.1-0.3) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.22 (0.1-0.3) 0.2 (0.1-0.3) 0.24 (0.1-0.3) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.22 (0.1-0.3) 0.2 (0.1-0.3) 0.24 (0.1-0.3) 0.2 (0.1-0.4) 0.25 (0.15-0.3) 0.12 (0.08-0.3) 0.2 (0.1-0.3) 0.24 (0.15-0.4)

YBG202 YBG302 Low-carbon steel Soft steel 180 YBM251 YBC301 YBM351 YC30S YBG202 YBG302

270(200-360) 230 (170-350) 270(220-350) 220 (180-300) 140 (100-220) 240 (180-350) 220 (150-330) 240 (200-320) 200 (160-280) 120 (80-200) 220 (170-340) 190 (130-300) 220 (180-300) 180 (150-250) 100 (60-180) 160 (110-270) 140 (100-250) 150 (120-240) 140 (100-240) 210 (120-300) 160 (120-200) 100 (80-160)
180-280
YBM251 YBC301 YBM351 YC30S YBG202 YBG302
B
Face milling tools
Alloy tool steel
280-350
YBM251 YBC301 YBM351 YC30S YBG202
M K
Stainless steel
270
YBG302 YBM251 YBM351 YBG102
Cast iron
180-250
YBG302 YD201
51 B
Milling
FMP01
Face milling tools
Kr:90o
ap
ap
B
Type Stock R

C type of coupling
ap ap
D type of coupling
80 100 125 160 200 250 315
d
27 32 40 40 60 60 60
L
50 50 63 63 63 63 70
apmax
18 18 18 18 18 18 18
Number of teeth Z
4 6 8 10 12 16 20
Type of coupling
A B B B C C D
Weight (kg)
1.2 1.7 3.2 5.1 7.4 12.3 21.9
FMP01
-080-A27-TP22-04 -100-B32-TP22-06 -125-B40-TP22-08 -160-B40-TP22-10 -200-C60-TP22-12 -250-C60-TP22-16 -315-D60-TP22-20
Stock available
Spare parts
Diameter D
80 100 125 ~ 315
Locator
Wedge
Wedge screw
Locator screw
Wrench
LTP4R1/L1 LTP4R/L
W04R/L
WM817 WM822
LOM515.1
WT20T WT25T
52 B

Milling

TPKN2204PDFR TPKN2204PDFL TPKN2204PDR TPKN2204PDL TPKN2204PDTR TPKN2204PDTL
22 22 22 22 22 22
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7 12.7 12.7 12.7 12.7
S
4.76 4.76 4.76 4.76 4.76 4.76
be
0.7 0.7 0.7 0.7 0.7 0.7
bs
1.4 1.4 1.4 1.4 1.4 1.4
an
15 15 15 15 15 15
B
Face milling tools


YBC301 Low-carbon steel Soft steel 180 YBM351 YBG202 YC30S YBC301

270 (220-350) 220 (180-300) 270 (200-360) 140 (100-220) 240 (200-320) 200 (160-280) 240 (180-350) 120 (80-200) 220 (180-300) 180 (150-250) 220 (170-340) 100 (60-180) 140 (100-240) 140 (100-250) 210 (120-300) 160 (120-200) 100 (80-160)
f(mm/z)
0.2 (0.1-0.4) 0.2 (0.08-0.3) 0.2 (0.1-0.3) 0.22 (0.1-0.3) 0.2 (0.1-0.4) 0.2 (0.08-0.3) 0.2 (0.1-0.3) 0.22 (0.1-0.3) 0.2 (0.1-0.4) 0.2 (0.08-0.3) 0.2 (0.1-0.3) 0.22 (0.1-0.3) 0.2 (0.08-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.35 (0.10-0.4) 0.24 (0.15-0.4)
180280
YBM351 YBG202 YC30S YBC301
Alloy tool steel
280350
YBM351 YBG202 YC30S
M K
Stainless steel
270
YBM351 YBG202 YBG102
Cast iron
180250
YBG302 YD201
53 B
Milling
FMP02
Face milling tools
Kr:90o
ap
ap
B
Type Stock

C type of coupling
ap
D type of coupling
ap
50 63 80 100 100 125
d
22 22 27 32 32 40
L
40 40 50 50 50 63
apmax
6.7 6.7 6.7 6.7 6.7 6.7
Number of teeth Z
5 6 8 8 10 12
Type of coupling
A A A B B B
Weight (kg)
0.3 0.5 0.9 1.7 1.7 2.6
FMP02
-050-A22-SE09-05 -063-A22-SE09-06 -080-A27-SE09-08 -100-B32-SE09-08 -100-B32-SE09-10 -125-B40-SE09-12
Stock available
54 B

Type Stock

Milling
Number of teeth Z
3 4 4 5 6 8 12 4 5 6 7 8 12 5 6 8 10 12 16 18 24
50 63 80 100 125 160 250 50 63 80 100 125 160 50 63 80 100 125 200 250 315
d
22 22 27 32 40 40 60 22 22 27 32 40 40 22 22 27 32 40 60 60 60
L
40 40 50 50 63 63 63 40 40 50 50 63 63 40 40 50 50 63 63 63 63
apmax
10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8
Type of coupling
A A A B B C C A A A B B C A A A B B C C D
Weight (kg)
0.3 0.4 0.9 1.2 3.1 4.1 11.1 0.3 0.4 0.8 1.2 3.0 3.9 0.2 0.4 0.8 1.2 2.9 6.1 10.9 21.6
FMP02
-050-A22-SE12-03 -063-A22-SE12-04 -080-A27-SE12-04 -100-B32-SE12-05 -125-B40-SE12-06 -160-C40-SE12-08 -250-C60-SE12-12 -050-A22-SE12-04 -063-A22-SE12-05 -080-A27-SE12-06 -100-B32-SE12-07 -125-B40-SE12-08 -160-C40-SE12-12 -050-A22-SE12-05 -063-A22-SE12-06 -080-A27-SE12-08 -100-B32-SE12-10 -125-B40-SE12-12 -200-C60-SE12-16 -250-C60-SE12-18 -315-D60-SE12-24
B
Face milling tools
Stock available
Spare parts
Diameter D
50 ~ 125 50 63 ~ 315
Shim Inserts
SE09 SE12 --S12BSX
Insert screw
Shim screw
Wrench
Wrench
I60M37 I60M3.510 I60M3.512
--SM57XA
WT09IS WT15IS
--WH35L
55 B
Milling

SEET09T308PER-PF
9.525
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
9.525
S
4.01
d
3.3
r
0.8
SEET09T308PER-PM 9.525
9.525
4.01
3.3
0.8
SEET09T308PER-PR
9.525
9.525
4.01
3.3
0.8
SEET120308PER-PF 13.308 13.308
4.04
4.1
0.8
SEET120308PER-PM 13.308 13.308
4.04
4.1
0.8
SEET120308PER-PR 13.308 13.308
4.04
4.1
0.8

Chipbreaker selection for FMP02 milling inserts

Classification / Function P M K PF For finishing For semi-finishing PM For roughing PR
56 B
Features of
FMP02
High economical efficiency
series milling cutters

FMP02 series square shoulder mills can carry out a variety of cutting operations including face, vertical square shoulder, slot etc. Coarse pitch, close pitch and extra close pitch, each has a unique merit. Inserts chipbreakers and grades are applied and optimized for a long time, they can achieve high efficiency machining in different condition. Each insert has 4 cutting edge, high economical efficiency.
Less cutting force

Large positive rake angle design makes cutting light and fast.
High productivity
The major cutting edge is a -curve, therefore the S type inert makes the tool obtain a ideal 90 approach angle while the minor cutting edge angle is enough. It ensures stable cutting operation. The maximum cutting depth can reach 10.8mm, and the maximum feed rate can reach 0.3mm/z
Easy and convenient to apply
Simple screw clamping, inserts displacement is convenient. The chip pocket of rake face is big enough for smooth chip removal.
High precision
Special structure design of inserts and tools and proper production make the tools possess very high precision, greatly improve the workpiece precision and surface quality.
High reliability
Adopting the carbide shim machined precisely to protect tool body, enable tool durable and long life.
57 B
Milling
Workpiece material

Cutting parameters Hardness HB Insert grade
YBM251 180 YBG202 YBG302
V(m/min)
270(220-350) 270(200-360) 230 (170-350) 240 (200-320) 240 (180-350) 220 (150-330) 220 (180-300) 220 (170-340) 190 (130-300) 150 (120-240) 160 (110-270) 140 (100-250) 210 (120-300) 160 (120-200) 200 (150-250)
f(mm/z) -PF
0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.1(0.1-0.2) 0.1(0.1-0.2) 0.15(0.1-0.2) 0.1(0.1-0.2) 0.1(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2) 0.15(0.1-0.2)
-PM
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
-PR
0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4) 0.3 (0.2-0.4)
B
Face milling tools
YBM251 High-carbon steel Alloy steel 180280 YBG202 YBG302 YBM251 Alloy tool steel 280350 YBG202 YBG302
M K
YBM251 Stainless steel 270 YBG202 YBG302 YBG102 Cast iron 180250 YBG202 YBD252
58 B

Case for FMP02 series
Milling
Workpiece materialHT300(HB150) Cooling system: dry cutting Machine: vertical machining center Cutting parameters Vc=200m/min ap=3mm fz=0.2mm/z ae=80mm Tool typeFMP02-100-B32-SE12-05 Insert type/gradeSEET120308PER-PM/YBD252
B
Face milling tools
Flank abrasion VB(mm)
Time
59 B
Milling
FMR01
Face milling tools
B
Type Stock

25 32 40 50
d
20 25 32 32
L
100 120 120 120
L1
30 35 40 40
R
5 5 6 6
apmax
5 5 6 6
Number of teeth Z
2 2 3 3
Weight (kg)
0.2 0.5 0.7 0.8
FMR01
-025-XP20-RC10-02 -032-XP25-RC10-02 -040-XP32-RC12-03 -050-XP32-RC12-03
Stock available
Spare parts
Diameter D
25 -32 40 -50
Insert screw
Wrench
I60M48.4 I60M3.510
WT15S
60 B

Milling
Basic dimensions(mm) Insert shape Type R

RCKT10T3MO-DM
5
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
10.0
S
3.97
d
4.4
B
Face milling tools
RCKT1204MO-DM
12.0
4.76
4.0
RCKT1204MO-DR
12.0
4.76
4.0


Cutting parameters Workpiece material Hardness HB Insert grade
YBM251 YBC301 Low-carbon steel Soft steel 180 YBM351 YBC302 YBG202 YBM251 YBC301 High-carbon steel Alloy steel 180-280 YBM351 YBG302 YBG202 YBM251 YBC301 Alloy tool steel 280-350 YBM351 YBG302 YBG202 YBM251
V(m/min)
270 (220-350) 220 (180-300) 270 (200-360) 240 (200-320) 200 (160-280) 240 (180-350) 220 (180-300) 180 (150-250) 220 (170-340) 150 (120-240) 150 (100-220) 160 (110-270) 210 (120-300)
f(mm/z) -DM
0.2(0.1-0.5) 0.25(0.1-0.5) 0.2(0.1-0.5) 0.2(0.1-0.5) 0.25(0.1-0.5) 0.2(0.1-0.5) 0.2(0.1-0.4) 0.2(0.1-0.5) 0.2(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.5)
-DR
0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.6) 0.3 (0.2-0.8) 0.3 (0.2-0.6) 0.3 (0.2-0.6) 0.3 (0.2-0.6) 0.3 (0.2-0.6) 0.3 (0.2-0.8)
M K
Stainless steel
270
YBM351 YBG202
Cast iron
180-250
YBG302
61 B
Milling
Case for FMR01 series
Workpiece material42CrMo (HRC35) Cooling system: dry cutting Machine: vertical machining center Cutting parameters Vc=200m/min ap=3mm fz=0.2mm/z
B
Face milling tools
Tool typeFMR01-025-XP20-RC10-02 Insert type/gradeRCKT10T3MO-DM/YBG202

22 minutes later
22 minutes later
62 B
Milling
B type of coupling
FMR02
A type of coupling
Type Stock

63 80 100 125 160
d
22 27 32 40 40
L
50 50 63 63 63
R
6 8 8 10 10
apmax
6 8 8 10 10

4 5 6 7 8 A B B B B
Weight (kg)
0.7 0.7 1.2 2.2 4.2
B
Face milling tools
FMR02
063-A22-RC12-04 080-B27-RC16-05 100-B32-RC16-06 125-B40-RC20-07 160-B40-RC20-08
Stock available
Spare parts
Diameter D
63 80 -100 125 -160
Insert screw
Wrench
I60M3.510 I60M513 I43M616
WT15IS ---
-WT20IT WT25IT
63 B
Milling

RCKT1204MO-DM RCKT1204MO-DR RCKT1606MO-DM RCKT1606MO-DR RCKT2006MO-DR
6 6 8 8 10
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
12.0 12.0 16 16 20
S
4.76 4.76 6.35 6.35 6.35
d
4.0 4.0 5.56 5.56 6.55


Workpiece material Hardness HB Cutting parameters Insert grade
YBM251 YBC301 Low-carbon steelSoft steel 180 YBM351 YBG302 YBG202 YBM251 YBC301 High-carbon steelAlloy steel 180-280 YBM351 YBG302 YBG202 YBM251 YBC301 Alloy tool steel 280-350 YBM351 YBG302 YBG202 YBM251
V(m/min)
270 (220-350) 220 (180-300) 270 (200-360) 240 (200-320) 200 (160-280) 240 (180-350) 220 (180-300) 180 (150-250) 220 (170-340) 150 (120-240) 150 (100-220) 160 (110-270) 210 (120-300)
f(mm/z) -DM
0.2(0.1-0.5) 0.25(0.1-0.5) 0.2(0.1-0.5) 0.2(0.1-0.5) 0.25(0.1-0.5) 0.2(0.1-0.5) 0.2(0.1-0.4) 0.2(0.1-0.5) 0.2(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.5)
-DR
0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.8) 0.3 (0.2-0.6) 0.3 (0.2-0.8) 0.3 (0.2-0.6) 0.3 (0.2-0.6) 0.3 (0.2-0.6) 0.3 (0.2-0.6) 0.3 (0.2-0.8)
M K
64 B
Stainless steel
270
YBM351 YBG202
Cast iron
180-250
YBG302
Milling
FMR03
Type Stock

B
Face milling tools
16 25 32 40 50
d
16 25 32 32 32
L
100 100 120 120 120
L1
25 30 40 40 40
R
4 4 5 6 6
apmax
4 4 5 6 6
Number of teeth Z
2 2 2 3 4
Weight (kg)
0.1 0.3 0.7 0.7 0.8
FMR03
-016-XP16-RD08-02 -025-XP25-RD08-02 -032-XP32-RD10-02 -040-XP32-RD12-03 -050-XP32-RD12-04
Stock available
Spare parts
Diameter D
25 32-50
Insert screw
Wrench
I60M37 I60M410
WT09IP WT15IP
65 B
Milling

RDKW0803MO RDKW10T3MO RDKW1204MO
4 5 6
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
8 10 12
S
3.18 3.97 4.76
d
3.4 4.4 4.4



270 (220-350) 220 (180-300) 270 (200-360) 240 (200-320) 200 (160-280) 240 (180-350) 220 (180-300) 180 (150-250) 220 (170-340) 150 (120-240) 150 (100-220) 160 (110-270) 210 (120-300)
f(mm/z)
0.2 (0.08-0.45) 0.25 (0.15-0.45) 0.2 (0.1-0.45) 0.2 (0.08-0.45) 0.25 (0.15-0.45) 0.2 (0.1-0.45) 0.2 (0.08-0.45) 0.25 (0.15-0.45) 0.2 (0.1-0.45) 0.2 (0.08-0.45) 0.25 (0.1-0.45) 0.2 (0.1-0.45) 0.2 (0.1-0.45)
M K
66 B
Stainless steel
270
YBM351 YBG202
Cast iron
180-250
YBG302
Milling
B type of coupling
FMR04
A type of coupling
B
Face milling tools
Type Stock

50 63 80 100 125 160
d
22 22 27 32 40 40
L
40 50 50 50 63 63
R
6 6 8 8 10 10
apmax
6 6 8 8 10 10

3 4 5 6 6 7 A A B B B B
Weight (kg)
0.3 0.5 1.2 1.0 1.9 3.7
FMR04
050-A22-RD12-03 063-A22-RD12-04 080-B27-RD16-05 100-B32-RD16-06 125-B40-RD20-06 160-B40-RD20-07
Stock available
Spare parts
Diameter D
50-63 80 -100 125 -160
Insert screw
Clamp
Clamp screw
Wrench
I60M3.510 I60M513 I43M616
WD-204 --
I60M410 --
WT15IP ---
-WT20IT WT25IT
67 B
Milling

RDKW1204MO RDKW1605MO RDKW2006MO
6 8 10
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Face milling tools
I.C
12.0 16.0 20.0
S
4.76 5.56 6.35
d
4.4 5.5 6.5



270 (220-350) 220 (180-300) 270 (200-360) 240 (200-320) 200 (160-280) 240 (180-350) 220 (180-300) 180 (150-250) 220 (170-340) 150 (120-240) 150 (100-220) 160 (110-270) 210 (120-300)
f(mm/z)
0.2 (0.08-0.45) 0.25 (0.15-0.45) 0.2 (0.1-0.45) 0.2 (0.08-0.45) 0.25 (0.15-0.45) 0.2 (0.1-0.45) 0.2 (0.08-0.45) 0.25 (0.15-0.45) 0.2 (0.1-0.45) 0.2 (0.08-0.45) 0.25 (0.1-0.45) 0.2 (0.1-0.45) 0.2 (0.1-0.45)
M K
68 B
Stainless steel
270
Cast iron
180-250
YBG302

Case for FMR04 series
Milling
Workpiece material42CrMo (HRC35) Cooling system: dry cutting Machine: vertical machining center Cutting parameters Vc=200m/min ap=3mm fz=0.3mm/z Tool typeFMR04-063-A22-RD12-04 Insert type/gradeRDKW1204MO/YBG202
B
Face milling tools
Abrasion comparison after 90 minutes cavity milling

69 B
Milling
EMP01
Square shoulder milling tools
Kr:90o
Straight shank
B
Type Stock

12 16 20 25 32 25 32 40 50 63
d
16 16 20 25 32 25 32 32 32 32
L
85 90 100 115 125 115 125 130 135 135
L1
25 25 30 35 40 35 40 42 45 45
apmax
10.5 10.5 10.5 10.5 10.5 15.5 15.5 15.5 15.5 15.5
Number of teeth Z
1 2 2 3 4 2 3 4 5 6
Weight (kg)
0.1 0.1 0.2 0.4 0.7 0.4 0.7 0.8 1.0 1.4
EMP01
Straight shank
012-G16-AP11-01 016-G16-AP11-02 020-G20-AP11-02 025-G25-AP11-03 032-G32-AP11-04 025-G25-AP16-02 032-G32-AP16-03 040-G32-AP16-04 050-G32-AP16-05 063-G32-AP16-06
Stock available
Spare parts
Diameter D
12-32 25-63
Screw Insert
AP11 AP16 I60M2.56.5T I60M48.4 WT08IP --
Wrench
-WT15IS
70 B
Milling
Kr:90o
EMP01
Weldon shank
Type Stock

12 16 20 25 32 25 32 40 50 63
d
16 16 20 25 32 25 32 32 32 32
L
85 90 100 115 125 115 125 130 135 135
L1
25 25 30 35 40 35 40 42 45 45
apmax
10.5 10.5 10.5 10.5 10.5 15.5 15.5 15.5 15.5 15.5
Number of teeth Z
1 2 2 3 4 2 3 4 5 6
Weight (kg)
0.1 0.1 0.2 0.4 0.7 0.4 0.7 0.8 1.0 1.4
B
EMP01
Weldon shank
012-XP16-AP11-01 016-XP16-AP11-02 020-XP20-AP11-02 025-XP25-AP11-03 032-XP32-AP11-04 025-XP25-AP16-02 032-XP32-AP16-03 040-XP32-AP16-04 050-XP32-AP16-05 063-XP32-AP16-06
Stock available
Spare parts
Diameter D
12-32 25-63
Screw Insert
Wrench
AP11 AP16
I60M2.56.5T I60M48.4
WT08IP --
-WT15IS
71 B
Milling

12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 17.877
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
I.W
6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 9.33
S
3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 5.76
d
2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 4.4
r
0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 0.8

72 B

Classification / Function For finishing -PF -PF -PF -LH For semi-finishing -PM -PM -PM
Milling
For roughing -PR -PR
P M K AL
ae
1 Square shoulder milling

ap
B
Recommended cutting parameters(D:Diameter range)

Workpiece material Hardness HB Cutting parameters Insert grade
YBM251 YBC301 Low-carbon steelSoft steel 180 YBM351 YBG202 YBG302 YBM251 YBC301
V(m/min)
320 (240-400) 260 (180-380) 320 (200-400) 280 (180-400) 280 (210-380) 240 (160-320) 280 (180-350) 260 (150-380) 260 (180-350) 220 (150-280) 260 (160-330) 240 (120-350) 200 (120-270) 180 (150-300) 200 (110-300) 170 (100-280) 220 (120-250) 200 (120-320)
f(mm/z) -PF
0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2)
-PM
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
-PR
0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.3) 0.25(0.2-0.3) 0.25(0.2-0.3) -
ae(mm)
0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D
High-carbon steelAlloy steel
180-280
YBM351 YBG202 YBG302 YBM251 YBC301
Alloy tool steel
280-350
YBM351 YBG202 YBG302 YBM251
M K N
Stainless steel
270
Cast iron
180-250
YBG102 YBD252
-LH
Al alloy ---YD101 YD201 3003000.2 (0.08-0.4) 0.2 (0.08-0.4) 0.5D 0.5D
73 B
Milling
2 Slot milling
Workpiece material Hardness HB

ae
ap

Cutting parameters Insert grade
YBM251 YBC301
V(m/min)
190 (170-250) 150 (130-210) 190 (140-250) 170 (130-250) 170 (150-220) 140 (110-200) 170 (130-250) 150 (110-230) 150 (130-210) 130 (100-180) 150 (110-240) 140 (80-210) 110 (80-190) 100 (80-170) 120 (80-190) 100 (70-180) 130 (80-180) 120 (80-210)
f(mm/z) -PF
0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15)
-PM
0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25)
-PR
0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) -
ae(mm)
D D D D D D D D D D D D D D D D D D
B
P
Low-carbon steelSoft steel
180
180-280
Alloy tool steel
280-350
M K N
Stainless steel
270
Cast iron
180-250
YBG102 YBD252
-LH
Al alloy ---YD101 YD201 3003000.2 (0.08-0.3) 0.2 (0.08-0.3) D D
74 B
Milling
Helical interpolation milling
3 Ramp milling, helical interpolation milling

Recommended cutting parameters(D:Diameter range) Ramp milling
Diameter D(mm) APKT Ramp milling, helical interpolation milling(Inserts11) Ramp milling Maximum Maximum cutting depth ramp angle ap(mm) 10.0 10.0 Minimum length Lm(mm) 56.7
Minimum diameter D1(mm) 20.0
Maximum pitch(mm)
16
2.0
Lm=
ap (:Maximum ramp angle) tg
B
20
10.0
5.0
114.4
28.0
2.0

25 10.0 4.5 127.0 40.0 2.0
32 D1
10.0
3.0
190.8
56.0
2.0
tg =
P D1
(:helical angle)
40
10.0
2.0
286.4
70.0
2.0
Selection for cutting speed and feed rate of each tooth, see the square shoulder milling.
75 B
Milling
Case for EMP01 series
Workpiece materialCast Stee (HB220) Cooling system: dry cutting Machine: vertical machining center Cutting parameters Vc=180m/min ap=3mm fz=0.1mm/z
B
Insert type/gradeAPKT160408-PM/YBC301 Tool typeEMP01-040-XP32-AP16-04
Abrasion comparison of inserts after milling curved face

15'
25'
76 B
Milling
B type of coupling
Kr:90o
EMP02
A type of coupling
C type of coupling
B
Type Stock

50 63 80 100 50 63 80 100 125 160 200 250
d
22 22 27 32 22 22 27 32 40 40 60 60
L
40 40 50 50 40 40 50 50 63 63 63 63
apmax
11 11 11 11 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5
Number of teeth Z
6 8 8 10 5 6 7 8 10 10 12 12
Type of coupling
A A A B A A A B B B C C
Weight (kg)
0.3 0.6 1.2 1.7 0.3 0.5 1.1 1.6 3.2 6.3 8.1 11.2
EMP02
050-A22-AP11-06 063-A22-AP11-08 080-A27-AP11-08 100-B32-AP11-10 050-A22-AP16-05 063-A22-AP16-06 080-A27-AP16-07 100-B32-AP16-08 125-B40-AP16-10 160-B40-AP16-10 200-C60-AP16-12 250-C60-AP16-12
Stock available
Spare parts
Diameter D
50-100 50-100
Screw Insert
AP11 AP16 I60M2.56.5T I60M410
Wrench
WT08IS WT15IS
77 B
Milling

12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 17.877
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
I.W
6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 9.33
S
3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 5.76
d
2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 4.4
r
0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 0.8

78 B
Milling
For roughing -PR -PR -PM
Classification / Function For finishing -PF -PF -PF -LH For semi-finishing -PM -PM
P M K AL
ae
Square shoulder milling Recommended cutting parameters(D:Diameter range)

YBM251 YBC301 Low-carbon steelSoft steel 180 YBM351 YBG202 YBG302 YBM251 YBC301
ap
B

320 (240-400) 260 (180-380) 320 (200-400) 280 (180-400) 280 (210-380) 240 (160-320) 280 (180-350) 260 (150-380) 260 (180-350) 220 (150-280) 260 (160-330) 240 (120-350) 200 (120-270) 180 (150-300) 200 (110-300) 170 (100-280) 220 (120-250) 200 (120-320)
f(mm/z) -PF
0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2)
-PM
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
-PR
0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.35) 0.25(0.2-0.3) 0.25(0.2-0.3) 0.25(0.2-0.3) 0.25(0.2-0.3) -
ae(mm)
0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D 0.5D
180-280
Alloy tool steel
280-350
M K N
Stainless steel
270
Cast iron
180-250
YBG102 YBD252
-LH
Al alloy ---YD101 YD201 3003000.2 (0.08-0.4) 0.2 (0.08-0.4) 0.5D 0.5D
79 B
Milling
EMP03
Kr:90o
A type of coupling
B type of coupling
B
Type Stock

Indexable milling tools Square shoulder milling tools
50 63 80 100
d
22 27 32 40
L
58 58 63 63
e
39 39 39 39
Flute number z
4 4 5 6
Number of Type of insert coupling

16 16 20 24 A A B B
Weight (kg)
0.5 0.9 1.3 2.0
EMP03
-050-A22-AP11-04 -063-A27-AP11-04 -080-B32-AP11-05 -100-B40-AP11-06
Stock available
Spare parts
Diameter D
50-100
Screw
Wrench
I60M2.56.5T
WT08IS
80 B

Milling
Kr:90o
EMP04
Weldon shank
Type Stock

B
20 25 32 40
d
20 25 32 40
L
120 130 140 150
L1
45 55 65 75
e
29.4 38.9 48.5 58.0
Flute number z
1 2 2 2
Number of insert
3 8 10 14
Weight (kg)
0.3 0.4 0.7 1.3
EMP04
-020-XP20-AP11-01 -025-XP25-AP11-02 -032-XP32-AP11-02 -040-XP40-AP11-02
Stock available
Spare parts
Diameter D
20-40
Screw
Wrench
I60M2.56.5T
WT08IS
81 B
Milling

APKT11T304-PF APKT11T308-PF APKT11T312-PF APKT11T316-PF APKT11T304-PM APKT11T308-PM APKT11T312-PM APKT11T316-PM APKT11T304-PR APKT11T308-PR APKT11T312-PR APKT11T316-PR APKT11T304-LH APKT11T308-LH
12.24 12.24 12.24 12.24 12.24 12.24 12.24 12.24 12.24 12.24 12.24 12.24 12.24 12.24
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
I.W
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
S
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
d
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
r
0.4 0.8 1.2 1.6 0.4 0.8 1.2 1.6 0.4 0.8 1.2 1.6 0.4 0.8

Classification / Function For finishing -PF -PF -PF -LH For semi-finishing -PM -PM -PM For roughing -PR -PR
P M K AL
82 B
Milling

Slot milling Square shoulder milling Deep square shoulder milling
ae=D ap:0.5D
ae:0.5D ap:1.2D
ae:0.2D ap<Cutting length of insert
Cutting parameters Workpiece material Hardness HB Insert grade V(m/min)

YBM251 YBC301 Low-carbon steelSoft steel 180 YBM351 YBG202 YBG302 YBM251 YBC301 270 (240-350) 220 (180-300) 270 (200-360) 240 (180-350) 240 (210-320) 200 (160-280) 240 (180-360) 220 (150-330) 220 (180-300) 180 (150-250) 220 (160-340) 200 (120-300) 170 (120-240) 160 (150-270) 150 (110-270) 140 (100-250) 200 (120-240) 180 (120-300)
B
Square shoulder milling f(mm/z) -PF

0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2) 0.1 (0.08-0.2)
-PM
0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3) 0.2 (0.1-0.3)
-PR
0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35) 0.25(0.2-0.35)
180-280
YBM351 YBG202 YBG302 YBM251 YBC301 YBM351 YBG202 YBG302 YBM251
Alloy tool steel
280-350
M K N
Stainless steel
270
Cast iron
180-250
YBG102 YBD252
-LH
Al alloy ---YD101 YD201 3003000.2 (0.08-0.4) 0.2 (0.08-0.4)
83 B
Milling
Workpiece material Hardness HB

Cutting parameters Insert grade V(m/min)
YBM251 YBC301 Low-carbon steelSoft steel 180 YBM351 YBG202 YBG302 YBM251 YBC301 270 (240-350) 220 (180-300) 270 (200-360) 240 (180-350) 240 (210-320) 200 (160-280) 240 (180-360) 220 (150-330) 220 (180-300) 180 (150-250) 220 (160-340) 200 (120-300) 170 (120-240) 160 (150-270) 150 (110-270) 140 (100-250) 200 (120-240) 180 (120-300)
Slot milling, deep square shoulder milling f(mm/z) -PF

0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15) 0.1 (0.08-0.15)
-PM
0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25) 0.15 (0.1-0.25)
-PR
0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3) 0.2 (0.2-0.3)
B
180-280
YBM351 YBG202 YBG302 YBM251 YBC301 YBM351 YBG202 YBG302 YBM251
Alloy tool steel
280-350
M K N
Stainless steel
270
Cast iron
180-250
YBG102 YBD252
-LH
Al alloy ---YD101 YD201 3003000.2 (0.08-0.3) 0.2 (0.08-0.3)
84 B
Milling
Kr:90o
EMP05
Weldon shank
B
Type Stock R

25 32 40
Number of insert e
20 30 40
d
25 32 32
L
130 140 150
L1
40 50 60
APMT11
3 1 --
APMT16
-2 4
Weight (kg)
0.5 0.8 1.0
EMP05
-025-XP25 -032-XP32 -040-XP32
Stock available
Spare parts
Diameter D
25-40
Screw Insert
APMT11 APMT16 I60M2.56.5T I60M410
Wrench
WT08IP WT15IP
85 B
Milling

APMT1135PDR
11.25
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
I.W
6.2
S
3.5
d
2.8
r
0.8
APMT160408PDER
17.25
9.25
4.76
4.4
0.8

1 Drilling
Workpiece material
Low-carbon steel Soft steel High-carbon steel Alloy steel Alloy tool steel
Hardness HB
180 180-280 280-350 270 180-250
Insert grade

180 (150-220) 160 (130-200) 140 (120-180) 80 (50-150) 150 (100-220)
f(mm/z)
0.2 (0.08-0.25) 0.15 (0.08-0.2) 0.12 (0.05-0.2) 0.08 (0.03-0.15) 0.15 (0.08-0.2)
P M K
Stainless steel Cast iron
2 Milling
Workpiece material
Low-carbon steel Soft steel High-carbon steel Alloy steel Alloy tool steel
Hardness HB
180 180-280 280-350 270 180-250
Insert grade

190 (140-250) 170 (130-250) 150 (110-240) 120 (80-190) 120 (80-210)
f(mm/z)
0.08 (0.04-0.15) 0.08 (0.04-0.15) 0.08 (0.04-0.15) 0.08 (0.04-0.15) 0.08 (0.04-0.15)
P M K
86 B
Indexable Milling Tools Profile milling tools
Milling
BMR01
Weldon shank
Type Stock

Basic dimensions(mm) R
10 10 10 12.5 12.5 12.5 16 16 16 20 20 20 25 25 31.5 31.5
Applicable inserts L1
50 75 100 70 95 100 85 100 150 85 100 150 100 100 100 100
D
20 20 20 25 25 25 32 32 32 40 40 40 50 50 63 63
e
20 20 20 23 23 23 31 31 31 41 41 41 45 45 52 52
d
20 20 20 25 25 25 32 32 32 40 40 40 40 40 40 40
L
125 150 200 150 175 200 175 200 250 175 200 250 200 300 200 300
Type
ZDET08T2CYR10 ZDET08T2CYR10 ZDET08T2CYR10 ZDET1103CYR12.5 ZDET1103CYR12.5 ZDET1103CYR12.5 ZDET13T3CYR16 ZDET13T3CYR16 ZDET13T3CYR16 ZPNT2204CY(R20) ZPNT2204CY(R20) ZPNT2204CY(R20) ZPNT2204CY(R25) ZPNT2204CY(R25) ZPNT2204CY(R31) ZPNT2204CY(R31)
Quantity
2 2 2 2 2 2 2 2 2 3 3 3 3 3 4 4
Type
SPMT060304 SPMT060304 SPMT060304 SPMT060304 SPMT060304 SPMT060304 SDMT090308 SDMT090308 SDMT090308 SPMT120408 SPMT120408 SPMT120408 SPMT120408 SPMT120408 SPMT120408 SPMT120408
Weight Quantity (kg)

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 0.3 0.3 0.4 0.5 0.6 0.7 0.9 1.1 1.4 1.4 1.7 2.1 1.8 2.8 3.0 3.5
B
Profile milling tools
BMR01
-020-XP20-S -020-XP20-M -020-XP20-L -025-XP25-S -025-XP25-M -025-XP25-L -032-XP32-S -032-XP32-M -032-XP32-L -040-XP40-S -040-XP40-M -040-XP40-L -050-XP40-S -050-XP40-M -063-XP40-S -063-XP40-M
Stock available
Spare parts
Diameter D
20-25 32 40-63
Screw
Wrench
I43M2.55.7 I43M48 I43M511
WT07IP ---
-WT15IS WT20IS
87 B
Milling

ZDET08T2CYR10 ZDET1103CYR12.5 ZDET13T3CYR16 ZPNT2204CY(R20) ZPNT2204CY(R25) ZPNT2204CY(R31)
10 12.5 16 20 25 31.5
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Profile milling tools Insert shape
L
8.4 10.6 13.2 16.1 16.9 17.6
I.C
6.75 8.5 10.5 12.7 12.7 12.7
S
2.78 3.18 3.97 4.76 4.76 4.76
d
2.8 2.8 4.4 5.56 5.56 5.56
14 14 14 11 11 11

Basic dimensions(mm) Type r

SPMT060304 SDMT090308 SPMT120408
0.4 0.8 0.8
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
6.35
I.C
6.35
S
3.18
d
2.8 4.4 5.5
11 15 11

9.525 9.525 3.18 12.7 12.70 4.76
88 B
Milling
f(mm/z)
0.25(0.1-0.4) 0.25(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.4) 0.2(0.1-0.3) 0.2(0.1-0.3) 0.2(0.1-0.3) 0.2(0.1-0.3) 0.3(0.2-0.5)

Workpiece material
Hardness HB
Insert grade
YBM251

180(120-220) 160(120-220) 150(100-200) 120(100-200) 100(80-150) 100(80-150) 100(80-150) 100(80-150) 150(100-180)
180 YBG302 YBM251 180-280 YBG302 YBM251
Alloy tool steel
280-350 YBG302
B
M K
YBM251 Stainless steel 270 YBG302 Cast iron 180-250 YBG302
89 B
Milling
BMR02
B
Type Stock

6 6 6 8 8 8 10 10 10
D
12 12 12 16 16 16 20 20 20
d
16 16 16 20 20 20 25 25 25
L
110 130 160 160 170 200 160 200 240
L1
40 50 50 45 65 65 60 80 80
Weight (kg)
0.1 0.2 0.2 0.3 0.3 0.4 0.5 0.6 0.8
BMR02
-012-G16-S -012-G16-M -012-G16-L -016-G20-S -016-G20-M -016-G20-L -020-G25-S -020-G25-M -020-G25-L
Stock available
Spare parts
Diameter D
12 16 20
Screw
Wrench
I90M409TT I90M511TT I90M513.5TT
WT10S WT15S WT15S
90 B
Milling
Basic dimensions(mm) Insert shape Type I.C

ROHX1203 ROHX1604 ROHX2005
12 16 20
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
8.5 11.3 14.1
S
3 4 5
d
4 5 5

B

Workpiece material Hardness HB Insert grade Cutting parameters
V(m/min) Carbon Steel HB180 fz(mm/z) apmax(mm) aemax(mm) V(m/min)
Diameter 12
100~200 0.15~0.25 0.8 0.8 80~180 0.15~0.25 0.8 0.8 60~100 0.15~0.25 0.4 0.4 70~150 0.1~0.2 0.6 0.6 160~300 0.2~0.3 1 1
16
100~200 0.2~0.3 1 1 80~180 0.2~0.3 1 1 60~100 0.2~0.3 0.5 0.5 70~150 0.1~0.25 0.8 0.8 160~300 0.25~0.35 1.5 1.5
20
100~200 0.2~0.3 1.25 1.25 80~180 0.2~0.3 1.25 1.25 60~100 0.2~0.3 0.6 0.6 70~150 0.1~0.25 1 1 160~300 0.25~0.35 1.8 1.8
Alloy steel
HB180~280
fz(mm/z) apmax(mm) aemax(mm) V(m/min)
Hardened steel
HRC55~65
YBG252
M K
Stainless steel
HB270
Cast iron
HB180-250
fz(mm/z) apmax(mm) aemax(mm)
91 B
Milling
BMR03
A type(30-40)

A type straight shank
B type straight shank
B
Type Profile milling tools
B type(16-25)
Stock

8 8 10 10 10 10 12.5 12.5 12.5 12.5 15 15 15 15 16 16 16 16 20 20 20 20
D
16 16 20 20 20 20 25 25 25 25 30 30 30 30 32 32 32 32 40 40 40 40
d
20 20 25 25 25 25 25 25 25 25 32 32 32 32 32 32 32 32 40 40 40 40
L
150 180 180 200 250 300 180 200 250 300 200 250 300 350 200 250 300 350 200 250 300 350
L1
70 80 80 100 150 110 80 100 110 120 120 150 200 200 120 150 200 200 120 150 200 200
e
16 16 20 20 20 20 25 25 25 25 30 30 30 30 32 32 32 32 40 40 40 40
Number Weight of teeth (kg) Z

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 0.3 0.4 0.5 0.6 0.7 1.0 0.6 0.7 0.8 1.0 1.0 1.3 1.6 1.9 1.1 1.4 1.6 2.0 1.6 2.0 2.5 3.0
Type
B B B B B B B B B B A A A A A A A A A A A A
Clamp
BMR03
-016-G20-S -016-G20-M -020-G25-S -020-G25-M -020-G25-L -020-G25-XL -025-G25-S -025-G25-M -025-G25-L -025-G25-XL -030-G32-S -030-G32-M -030-G32-L -030-G32-XL -032-G32-S -032-G32-M -032-G32-L -032-G32-XL -040-G40-S -040-G40-M -040-G40-L -040-G40-XL
WD-208
CBH5R1
Stock available
92 B
Milling
BMR03
A type(30-50)
A type weldon shank
B type weldon shank
B type(16-25)
B
Type Stock

8 10 10 12.5 12.5 15 15 16 16 20 20 25 25
D
16 20 20 25 25 30 30 32 32 40 40 50 50
d
20 25 25 25 25 32 32 32 32 40 40 50 50
L
111 127 150 137 200 161 250 161 250 175 250 200 250
L1
60 70 80 80 100 100 150 100 120 100 120 100 150
e
16 20 20 25 25 30 30 32 32 40 40 50 50

2 2 2 2 2 2 2 2 2 2 2 2 2 0.2 0.3 0.4 0.4 0.6 0.8 1.3 0.8 1.3 1.3 2.0 2.5 3.1
Type
B B B B B A A A A A A A A
Clamp
BMR03
-016-XP20-M -020-XP25-M -020-XP25-L -025-XP25-M -025-XP25-L -030-XP32-M -030-XP32-L -032-XP32-M -032-XP32-L -040-XP40-M -040-XP40-L -050-XP50-M -050-XP50-L
WD-208
CBH5R1
Stock available
93 B
Milling
BMR03
A type(30-50)

A type morse taper shank
B
B type(20-25)
B type morse taper shank
Indexable milling tools Profile milling tools
Type Stock

10 10 12.5 12.5 15 15 16 16 20 20 20 25 25
D
20 20 25 25 30 30 32 32 40 40 40 50 50
d
18.7 18.7 23.5 23.5 28.2 28.2 29.2 29.2 36.9 36.9 36.9 46.8 46.8
L
156 186 156 186 189 229 179 209 199 226 256 236 286
L1
70 100 70 100 70 120 70 100 100 90 120 100 150
e
20 20 25 25 30 30 32 32 40 40 40 50 50

2 2 2 2 2 2 2 2 2 2 2 2 2 0.4 0.4 0.4 0.4 0.8 1.0 0.9 0.9 1.0 1.8 2.0 2.2 2.9
type
B B B B A A A A A A A A A
Clamp
BMR03
-020-MT3-M -020-MT3-L -025-MT3-M -025-MT3-L -030-MT4-M -030-MT4-L -032-MT4-M -032-MT4-L -040-MT4-M -040-MT5-L -040-MT5-XL -050-MT5-M -050-MT5-L
WD-208
CBH5R1
Stock available
94 B
Milling
BMR03
Compound shank
Type Stock

B
20 20 20 25 25 25
D
40 40 40 50 50 50
d
50.8 50.8 50.8 50.8 50.8 50.8
L
250 300 350 250 300 350
L1
170 220 270 170 200 270
e
40 40 40 50 50 50

2 2 2 2 2 2 1.3 3.1 3.5 3.1 3.8 4.4
Clamp
BMR03
-040-XPX-M -040-XPX-L -040-XPX-XL -050-XPX-M -050-XPX-L -050-XPX-XL
CBH5R1
Stock available
Spare parts
Diameter D
16 20 25 30 32 40 50
Clamp
Screw
Wrench
---WD-208 WD-208 CBH5R1 CBH5R1
I60M2.56.5 I60M3.508TT I60M410 I60M513 I60M513 I43M616 I43M821 I43M616 WT20IT WT25IT WT25IT WT30IT --
WT07P WT10IP WT15S
--
95 B
Milling

XPHT16R0803-GM XPHT20R10T3-GM
8 10
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
d
3.1 4.0 4.7 5.8 5.8 6.8 9.2
S
3.18 3.97 4.76 6.35 6.35 7.94 7.94
9 9 9 11 9 9 9
L
16 20 25 30 32 40 50
Applicable tools
16 20 25 30 32 40 50

XPHT25R1204-GM 12.5 XPHT30R1506-GM XPHT32R1606-GM XPHT40R2007-GM XPHT50R2507-GM

15 16 20 25
96 B
BMR03
series Ball nose end mills
The unique chipbreaker design and big rake angle can effectively control the curling and flow direction of chippings and reduce the cutting force, improve workpiece surface quality and tool life. The insert after precisely grinding periphery and locating surface can sufficiently ensure the shape accuracy of cutting edge and the precision of location and installation, improve the reliability of installation and the workpiece precision after machining. The concave structure design of flank can effectively enhance the strength of cutting edge, and prevent the scraping between the clearance face and workpiece surface. Therefore it improves the workpiece surface quality and prolongs the life of insert. The design of cutting edge over center and a big negative rake angle make it possible to cut vertically, thus the capability of anti-breakage is enhanced. The rough ball nose milling cutters with big diameter adopt the top and hole clamping style, insert clamping becomes more firm and stable. The machining also is high efficiency even at the poor condition such as long overhang and large vibration etc. The adapter types include straight shank, Weldon shank, Morse taper shank and compound shank.
Slot shape after machining
Notes:
The insert edge should correspond to the locating face of insert pocket on the tool, dont install the wrong side. Before screwing down the insert, ensure the good connection between insert and insert pocket. According to the machine power and machining conditions to select and adjust the cutting parameters. If vibration occurs in the machining process, reduce the cutting speed moderately.
97 B
Milling
Operations
Diameter range 16
B
Workpiece material
Medium carbon steel Hardness 150~250HB
Cutting parameters
V(m/min) Fz(mm/z)
Machining of slot
150~220 0.1~0.4 4 -100~150 0.1~0.4 4 -80~120 0.1~0.3 4 -80~100 0.08~0.15 4 -250~300 0.08~0.15 4 -200~250 0.08~0.15 4 --
Side milling (slight)

150~220 0.1~0.4 4 3 100~150 0.1~0.4 4 3 80~120 0.1~0.3 4 3 80~100 0.08~0.15 4 2 250~300 0.08~0.15 4 3 200~250 0.08~0.15 4 3 150~220 0.1~0.4 8 4 100~150 0.1~0.4 8 4 80~120 0.1~0.3 8 4 80~100 0.08~0.15 8 3 250~300 0.08~0.15 8 4 200~250 0.08~0.15 8 4
Side milling (deep)

150~220 0.1~0.4 16 1.5 100~150 0.1~0.4 16 1.5 80~120 0.1~0.3 16 1.5 ----250~300 0.08~0.15 16 1.5 200~250 0.08~0.15 16 1.5
Insert grade
ap(mm) ae(mm)
V(m/min)
Alloy steel Hardness 150~280HB
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Die steel Hardness 150~255HB
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
YBG302
Hardened steel Hardness 40~50HRC
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Grey Cast iron Hardness 160~260HB
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Nodular Cast iron Hardness 170~300HB
Fz(mm/z)
ap(mm) ae(mm)
Note: 1. Parameters in the table shall be adjusted as per the rigidity of the machine or workpiece. 2. Wind cooling to be preferred.
98 B
Milling
Diameter range 20
Operations
Workpiece material
Cutting parameters
V(m/min) Fz(mm/z)
Machining of slot
150~220 0.1~0.4 5 -100~150 0.1~0.4 5 -80~120 0.1~0.3 5 -80~100 0.08~0.15 5 -250~300 0.08~0.15 5 -200~250 0.08~0.15 5 --

150~220 0.1~0.4 5 4 100~150 0.1~0.4 5 4 80~120 0.1~0.3 5 4 80~100 0.08~0.15 5 4 250~300 0.08~0.15 5 4 200~250 0.08~0.15 5 4 150~220 0.1~0.4 10 5 100~150 0.1~0.4 10 5 80~120 0.1~0.3 10 5 80~100 0.08~0.15 10 5 250~300 0.08~0.15 10 5 200~250 0.08~0.15 10 5
Side milling (deep)

150~220 0.1~0.4 20 2 100~150 0.1~0.4 20 2 80~120 0.1~0.3 20 2 ----250~300 0.08~0.15 20 2 200~250 0.08~0.15 20 2
Insert grade
B
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
YBG302
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
99 B
Milling
Operations
Diameter range 25
B
Workpiece material
Cutting parameters
V(m/min) Fz(mm/z)
Machining of slot
150~220 0.1~0.4 6 -100~150 0.1~0.4 6 -80~120 0.1~0.3 6 -80~100 0.08~0.15 6 -250~300 0.08~0.15 6 -200~250 0.08~0.15 6 --

150~220 0.1~0.4 6 5 100~150 0.1~0.4 6 5 80~120 0.1~0.3 6 5 80~100 0.08~0.15 6 5 250~300 0.08~0.15 6 5 200~250 0.08~0.15 6 5 150~220 0.1~0.4 12.5 6.5 100~150 0.1~0.4 12.5 6.5 80~120 0.1~0.3 12.5 6.5 80~100 0.08~0.15 12.5 6.5 250~300 0.08~0.15 12.5 6.5 200~250 0.08~0.15 12.5 6.5
Side milling (deep)

150~220 0.1~0.4 25 3 100~150 0.1~0.4 25 3 80~120 0.1~0.3 25 3 ----250~300 0.08~0.15 25 3 200~250 0.08~0.15 25 3
Insert grade
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
YBG302
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
100 B
Milling
Diameter range 30, 32
Operations
Workpiece material
Cutting parameters
V(m/min) Fz(mm/z)
Machining of slot
150~220 0.1~0.4 10 -100~150 0.1~0.4 10 -80~120 0.1~0.3 10 -80~100 0.08~0.15 10 -250~300 0.08~0.15 10 -200~250 0.08~0.15 10 --

150~220 0.1~0.4 10 6 100~150 0.1~0.4 10 6 80~120 0.1~0.3 10 6 80~100 0.08~0.15 10 6 250~300 0.08~0.15 10 6 200~250 0.08~0.15 10 6 150~220 0.1~0.4 16 9 100~150 0.1~0.4 16 9 80~120 0.1~0.3 16 9 80~100 0.08~0.15 16 9 250~300 0.08~0.15 16 9 200~250 0.08~0.15 16 9
Side milling (deep)

150~220 0.1~0.4 28 6 100~150 0.1~0.4 28 6 80~120 0.1~0.3 28 6 ----250~300 0.08~0.15 28 6 200~250 0.08~0.15 28 6
Insert grade
B
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
YBG302
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
101 B
Milling
Operations
Diameter range 40
B
Workpiece material
Cutting parameters
V(m/min) Fz(mm/z)
Machining of slot
150~220 0.1~0.4 12 -100~150 0.1~0.4 12 -80~120 0.1~0.3 12 -80~100 0.08~0.15 12 -250~300 0.08~0.15 12 -200~250 0.08~0.15 12 --

150~220 0.1~0.4 10 8 100~150 0.1~0.4 10 8 80~120 0.1~0.3 10 8 80~100 0.08~0.15 10 8 250~300 0.08~0.15 10 8 200~250 0.08~0.15 10 8 150~220 0.1~0.4 20 12 100~150 0.1~0.4 20 12 80~120 0.1~0.3 20 12 80~100 0.08~0.15 20 12 250~300 0.08~0.15 20 12 200~250 0.08~0.15 20 12
Side milling (deep)

150~220 0.1~0.4 35 8 100~150 0.1~0.4 35 8 80~120 0.1~0.3 35 8 ----250~300 0.08~0.15 35 8 200~250 0.08~0.15 35 8
Insert grade
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
YBG302
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
102 B
Milling
Diameter range 50
Operations
Workpiece material
Cutting parameters
V(m/min) Fz(mm/z)
Machining of slot
150~220 0.1~0.4 15 -100~150 0.1~0.4 15 -80~120 0.1~0.3 15 -80~100 0.08~0.15 15 -250~300 0.08~0.15 15 -200~250 0.08~0.15 15 --

150~220 0.1~0.4 10 10 100~150 0.1~0.4 10 10 80~120 0.1~0.3 10 10 80~100 0.08~0.15 10 10 250~300 0.08~0.15 10 10 200~250 0.08~0.15 10 10 150~220 0.1~0.4 25 15 100~150 0.1~0.4 25 15 80~120 0.1~0.3 25 15 80~100 0.08~0.15 25 15 250~300 0.08~0.15 25 15 200~250 0.08~0.15 25 15
Side milling (deep)

150~220 0.1~0.4 40 10 100~150 0.1~0.4 40 10 80~120 0.1~0.3 40 10 ----250~300 0.08~0.15 40 10 200~250 0.08~0.15 40 10
Insert grade
B
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
YBG302
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
V(m/min)
Fz(mm/z)
ap(mm) ae(mm)
103 B
Milling
BMR04

Straight shank with straight neck
B
Type Stock

6 6 8 8 10 10 12.5 12.5 15 15 16 16
D
12 12 16 16 20 20 25 25 30 30 32 32
d
12 12 16 16 20 20 25 25 32 32 32 32
d1
11 11 14 14 18 18 23 23 27 27 29 29
L1
35 45 40 55 65 100 70 100 80 110 80 110
L
125 150 150 180 180 250 200 250 250 300 250 300
Weight (kg)
0.1 0.1 0.2 0.3 0.4 0.6 0.7 0.9 1.2 1.5 1.4 1.7
BMR04
-012-G12-M -012-G12-L -016-G16-M -016-G16-L -020-G20-M -020-G20-L -025-G25-M -025-G25-L -030-G32-M -030-G32-L -032-G32-M -032-G32-L
Stock available
104 B
Milling
BMR04
Straight shank with taper neck
Type Stock

B
6 6 8 8 10 10 12.5 12.5 15 15 16 16
D
12 12 16 16 20 20 25 25 30 30 32 32
d
16 16 20 20 25 25 32 32 40 40 40 40
d1
11 11 14 14 18 18 23 23 27 27 29 29
L1
50 70 60 80 75 95 90 110 110 125 110 125
L
125 150 150 180 180 200 200 250 250 300 250 300
Weight (kg)
0.2 0.2 0.3 0.3 0.6 0.6 1.0 1.3 2.0 2.4 2.0 2.4
BMR04
-012-G16-M -012-G16-L -016-G20-M -016-G20-L -020-G25-M -020-G25-L -025-G32-M -025-G32-L -030-G40-M -030-G40-L -032-G40-M -032-G40-L
Stock available
105 B
Milling
Spare parts
Diameter
12 16 20 25 30
Screw
Wrench
I70M410TT I70M512TT I70M516TT I70M620TT I70M825TT I70M825TT
WT15IP WT20IP WT20IP WT20IP ---
----WT30IT WT30IT
B
32

ZOHX1203-GF ZOHX1604-GF ZOHX2005-GF ZOHX2506-GF ZOHX3007-GF ZOHX3207-GF ZOHX1203-GM ZOHX1604-GM ZOHX2005-GM ZOHX2506-GM ZOHX3007-GM ZOHX3207-GM
6 8 10 12.5 15 16 6 8 10 12.5 15 16
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12 16 20 25 30 32 12 16 20 25 30 32
S
3 4 5 6 7 7 3 4 5 6 7 7
d
4 5 5 6 8 8 4 5 5 6 8 8
Applicable insert
D 12 16 20 25 30 32 12 16 20 25 30 32

106 B
BMR04
-GF
Series Ball nose finishing end mill
Positive rake angle and double clearance

angle, the design of curved cutting edge take both sharpness and strength into consideration. The edge with high precision is applicable in the stable machining condition and the condition with high precision demand for workpiece profile.
-GM
0 rake angle, only one clearance
angle, high edge strength. Suitable for the machining condition requiring high cutting efficiency.
The insert is a combination of ultra-fine-grain cemented

carbide substrate and nano coating grade YBG252.
107 B
Milling
Calculation of cutting speed for BMR02/04 series ball nose endmills

1.when tool axial line is vertical to the machined surface
N=
1000Vc (r/min) Dc
B
D c = 2 a p( D - a p)
Nrotating speed Vcreal cutting speed Dceffective cutting diameter Dtool nominal diameter apaxial cutting depth
ae
ap
2.When there is a inclined angle between the tool axial line and the machined surface, the recommended cutting speed should be multiplied by a factor in the follow table to obtain the cutting speed used for programming
Diameter(mm)
12
0.2 1.00 1.04 1.16 1.42 2.02 3.92 0.5 1.00 1.01 1.07 1.24 1.60 2.50 0.2 1.00 1.05 1.18 1.47 2.14 4.48
16
0.5 1.00 1.01 1.10 1.30 1.73 2.87 0.5 1.00 1.02 1.12 1.34 1.83 3.20
20
1 1.02 1.04 1.06 1.21 1.53 2.29 0.5 1.00 1.03 1.14 1.38 1.93 3.57
25
1 1.01 1.04 1.08 1.25 1.62 2.55 0.5 1.00 1.04 1.16 1.42 2.01 3.9
30
1.5 1.00 1.01 1.06 1.21 1.53 2.29 0.5 1.00 1.04 1.16 1.43 2.04 4.03
32
1.5 1.00 1.00 1.06 1.22 1.55 2.37
Cutting depth
ap(mm)
15 30
Inclined angle
45 60 75 90
108 B

Workpiece material Hardness HB Insert grade Cutting parameters
V(m/min) Carbon steel HB180 fz(mm/z) apmax(mm) aemax(mm) V(m/min)
Milling
25
100~200 0.25~0.35 1.5 1.5 80~180 0.25~0.35 1.5 1.5 60~100 0.25~0.35 0.8 0.8 70~150 0.2~0.3 1.25 1.25 160~300 0.3~0.4 2 2
Tool specification 12
100~200 0.15~0.25 0.8 0.8 80~180 0.15~0.25 0.8 0.8 60~100 0.15~0.25 0.4 0.4 70~150 0.1~0.2 0.6 0.6 160~300 0.2~0.3 1 1
16
100~200 0.2~0.3 1 1 80~180 0.2~0.3 1 1 60~100 0.2~0.3 0.5 0.5 70~150 0.1~0.25 0.8 0.8 160~300 0.25~0.35 1.5 1.5
20
100~200 0.2~0.3 1.25 1.25 80~180 0.2~0.3 1.25 1.25 60~100 0.2~0.3 0.6 0.6 70~150 0.1~0.25 1 1 160~300 0.25~0.35 1.8 1.8
30
100~200 0.25~0.35 2 2 80~180 0.25~0.35 2 2 60~100 0.25~0.35 1 1 70~150 0.2~0.3 1.5 1.5 160~300 0.3~0.4 2.5 2.5
32
100~200 0.25~0.35 2 2 80~180 0.25~0.35 2 2 60~100 0.25~0.35 1 1 70~150 0.2~0.3 1.5 1.5 160~300 0.3~0.4 2.5 2.5
Alloy stee
HB180~280
B
Hardened steel
HRC55~65
YBG252
M K
Stainless steel
HB270
Cast iron
HB180-250
fz(mm/z) apmax(mm) aemax(mm)
109 B
Milling
Case for BMR04 series

Workpiece material42CrMo (HRC35) Cooling system: dry cutting Machine: vertical machining center Cutting parameters Vc=150m/min ap=0.1mm fz=0.2mm/Z
B
Tool typeBMR04-020-G25-M Insert type/gradeZOHX2005-GM/YBG252
Abrasion comparison of inserts after milling curved face

60minutes later
Flank abrasion0.08
Flank abrasion0.10
120minutes later
Flank abrasion0.12
Flank abrasion0.16
110 B
Milling
Sequence number of series
Side and face milling tools code key

Cutter style
Face milling Square shoulder milling Helical end milling
Approach angle
Cutting diameter D (mm)
Cutting width of milling tools

Side and face milling Profile milling Chamfer milling Special milling
Coupling structure and demension

A type of coupling B type of coupling C type of coupling D type of coupling Mounting by keyway
B
Side and face milling tools
Insert shape
Diamond with 80o Diamond with 55o Round Square Regular triangle Diamond with 35o Diamond with 86o
Insert clearance angle

Diameter of IC
Cutting direction (R: Right L: Left)
Insert shape
Number of teeth
111 B
Milling
SMP01

K type of coupling
B
Type Stock R

100 125 160 100 125 160 100 125 160 200 250 100 125 160 200 250 100 125 160 200 250
d
27 40 40 27 40 40 27 40 40 50 50 27 40 40 50 50 27 40 40 50 50
c
40.7 50.5 66.7 45 58 68 45 58 68 67.7 72 45 58 68 72 72 45 58 68 72 72
H
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
ap
4 4 4 5 5 5 6 6 6 6 6 7 7 7 7 7 8 8 8 8 8
aemax
25 32 44 25 31 44 25 31 44 62 87 25 31 44 62 87 25 31 44 62 87
Number Type of Weight Applicable of teeth inserts coupling (kg) Z

10 XSEQ1202 12 16 10 XSEQ1203 12 16 10 12 XSEQ12T3 16 18 24 10 12 XSEQ1204 16 18 24 10 12 XSEQ12T4 16 18 24 K K K K K K K K K K K K K K K K K K K K K 0.2 0.3 0.5 0.2 0.3 0.6 0.3 0.4 0.7 1.1 1.7 0.3 0.4 0.8 1.2 1.9 0.3 0.5 0.9 1.4 2.2
Mounting by keyway
SMP01
-1004-K27-SN12-10 -1254-K40-SN12-12 -1604-K40-SN12-16 -1005-K27-SN12-10 -1255-K40-SN12-12 -1605-K40-SN12-16 -1006-K27-SN12-10 -1256-K40-SN12-12 -1606-K40-SN12-16 -2006-K50-SN12-18 -2506-K50-SN12-24 -1007-K27-SN12-10 -1257-K40-SN12-12 -1607-K40-SN12-16 -2007-K50-SN12-18 -2507-K50-SN12-24 -1008-K27-SN12-10 -1258-K40-SN12-12 -1608-K40-SN12-16 -2008-K50-SN12-18 -2508-K50-SN12-24
Stock available
112 B
Tools code key
B111
Indexable Milling Tools Side and face milling tools
Milling
B type of coupling
SMP01
A type of coupling
Type Stock R

63 80 100 63 80 100 63 80 100 125 160 63 80 100 125 160 63 80 100 125 160
d
22 22 27 22 22 27 22 22 27 40 40 22 22 27 40 40 22 22 27 40 40
c
40 40 48 40 40 48 40 40 48 70 70 40 40 48 70 70 40 40 48 70 70
H
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
ap
4 4 4 5 5 5 6 6 6 6 6 7 7 7 7 7 8 8 8 8 8
aemax
10 18 23 10 18 23 10 18 23 24 41 10 18 23 24 41 10 18 23 24 41
Number Type of Weight Applicable of teeth inserts coupling (kg) Z

6 XSEQ1202 8 10 6 XSEQ1203 8 10 6 8 XSEQ12T3 10 12 16 6 8 XSEQ1204 10 12 16 6 8 XSEQ12T4 10 12 16 A A A A A A A A A B B A A A B B A A A B B 0.2 0.4 0.6 0.2 0.4 0.7 0.2 0.5 0.7 1.0 1.3 0.2 0.5 0.7 1.1 1.4 0.2 0.5 0.8 1.1 1.5
B
SMP01
Arbor mounting
-0634-A22-SN12-06 -0804-A22-SN12-08 -1004-A27-SN12-10 -0635-A22-SN12-06 -0805-A22-SN12-08 -1005-A27-SN12-10 -0636-A22-SN12-06 -0806-A22-SN12-08 -1006-A27-SN12-10 -1256-B40-SN12-12 -1606-B40-SN12-16 -0637-A22-SN12-06 -0807-A22-SN12-08 -1007-A27-SN12-10 -1257-B40-SN12-12 -1607-B40-SN12-16 -0638-A22-SN12-06 -0808-A22-SN12-08 -1008-A27-SN12-10 -1258-B40-SN12-12 -1608-B40-SN12-16
Stock available
Tools code key
B111
113 B
Milling
Spare parts
Diameter D
63-160 63-160 63-250 63-250
Cutting width ap
4 5 6 7 8
Screw
Wrench
I91M43.3X I91M44.3X I91M45.3X I91M46.3X I91M47.3X WT10S
B
63-250

XSEQ1202 XSEQ1203 XSEQ12T3 XSEQ1204 XSEQ12T4
12.7 12.7 12.7 12.7 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
12.7 12.7 12.7 12.7 12.7
S
2.6 3.0 3.8 4.0 4.8
d
5.0 5.0 5.0 5.0 5.0

114 B
Milling
f(mm/z)
0.1(0.08-0.25) 0.15(0.1-0.3) 0.1(0.08-0.25) 0.15(0.1-0.3) 0.1(0.08-0.25) 0.15(0.1-0.3) 0.1(0.05-0.15) 0.08(0.05-0.15) 0.1(0.05-0.15) 0.08(0.05-0.15)

Workpiece material
Hardness HB
Insert grade
YBG202

180 (100-250) 150 (100-200) 150 (80-250) 120 (80-200) 120 (80-250) 100 (80-200) 120 (80-250) 100 (80-200) 120 (80-250) 150 (100-250)
180 YBG302 YBG202 180-280 YBG302 YBG202
P M K
Alloy tool steel
280-350 YBG302 YBG202
B
Stainless steel
270 YBG302 YBG152
Cast iron
180-250 YBG302
115 B
Milling
SMP03

K type of coupling
B
Type Stock R

80 100 100 125 125 160 160 160 160 200 200 200
c
41 47 47 55 55 62 62 62 62 72 72 72
d
27 32 32 40 40 40 40 40 40 50 50 50
aemax
17 25 25 34 34 47 49 49 49 62 62 63
ap
8 8 10 10 12 12 16 18 18 16 18 20
H
12 12 14 14 16 16 20 24 26 20 24 26
Number Type of Weight Applicable inserts of teeth coupling (kg) Z

10 MPHT060304-DM 14 14 16 MPHT080305-DM 12 14 12 12 MPHT120408-DM 12 14 14 14 K K K K K K K K K K K K 0.2 0.3 0.4 0.6 0.7 1.3 1.6 1.9 2.1 2.5 2.9 3.3
Mounting by keyway
SMP03
-0808-K27-MP06-10 -1008-K32-MP06-14 -10010-K32-MP06-14 -12510-K40-MP06-16 -12512-K40-MP08-12 -16012-K40-MP08-14 -16016-K40-MP12-12 -16018-K40-MP12-12 -16020-K40-MP12-12 -20016-K50-MP12-14 -20018-K50-MP12-14 -20020-K50-MP12-14
Stock available
Spare parts
Diameter D
80-125 125-160 160-200
Screw Insert
MP06 MP08 MP12 I60M2.5x6.5 I60M3x7 I60M5x13 WT07IP WT09P
Wrench
WT20IS
116 B
Tools code key
B111
Indexable Milling Tools Side and face milling tools
Milling
B type of coupling
SMP03
A type of coupling
C type of coupling
B
Type Stock R

80 100 100 125 125 160 200 125 160 160 200 200 200
c
45 55 55 65 65 80 92 65 80 80 92 92 92
d
22 27 27 32 32 40 40 32 40 40 40 40 40
aemax
21 24 24 33 33 45 53 30 45 45 53 53 53
ap
8 8 10 10 12 12 12 16 16 18 16 18 20
H
40 40 40 45 45 50 50 50 60 60 50 50 50
Number Type of Weight Applicable inserts of teeth coupling (kg) Z

10 MPHT060304-DM 14 14 16 12 MPHT080305-DM 14 18 10 12 MPHT120408-DM 12 14 14 14 A B B B B B C B B B C C C 0.4 0.6 0.7 1.1 1.4 1.9 3.2 2.3 2.3 2.4 3.6 3.9 4.2
SMP03
Arbor mounting
-0808-A22-MP06-10 -1008-B27-MP06-14 -10010-B27-MP06-14 -12510-B32-MP06-16 -12512-B32-MP08-12 -16012-B40-MP08-14 -20012-C40-MP08-18 -12516-B32-MP12-10 -16016-B40-MP12-12 -16018-B40-MP12-12 -20016-C40-MP12-14 -20018-C40-MP12-14 -20020-C40-MP12-14
Stock available
Spare parts
Diameter D
80-125 125-200 125-200
Screw Insert
MP06 MP08 MP12 I60M2.56.5 I60M37 I60M513 WT07IP WT09P
Wrench
WT20IS
Tools code key
B111
117 B
Milling

MPHT060304-DM MPHT080305-DM MPHT120408-DM
6.35 8.3 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
L
6.35 8.3 12.7
S
3.18 3.18 4.76
d
2.8 5.56 5.56
r
0.4 0.5 0.8


Workpiece material
Hardness HB
Insert grade
YBG202

180 (100-250) 150 (100-200) 150 (80-250) 120 (80-200) 120 (80-250) 100 (80-200) 120 (80-250) 100 (80-200) 120 (80-250) 150 (100-250)
f(mm/z)
0.1(0.08-0.25) 0.15(0.1-0.3) 0.1(0.08-0.25) 0.15(0.1-0.3) 0.1(0.08-0.25) 0.15(0.1-0.3) 0.1(0.05-0.15) 0.08(0.05-0.15) 0.1(0.05-0.15) 0.08(0.05-0.15)
180 YBG302 YBG202 180-280 YBG302 YBG202
P M K
Alloy tool steel
280-350 YBG302 YBG202
Stainless steel
270 YBG302 YBG152
Cast iron
180-250 YBG302
118 B
Indexable Milling Tools High feed milling cutters
Milling
XMR01
S type insert, straight shank
ae
ap
Specication of tools
Type Stock

25 32 35 32 40
ap
1.4 1.4 1.4 1.8 1.8
ae
8.8 8.8 8.8 11.7 11.7
L1
60 70 70 70 70
L
140 150 150 150 150
d
25 32 32 32 40
Number of teeth Z
2 3 3 2 3
B
High feed milling cutters
Weight (kg)
0.5 0.8 0.8 0.8 1.3
XMR01
-025-G25-SD09-02 -032-G32-SD09-03 -035-G32-SD09-03 -032-G32-SD12-02 -040-G40-SD12-03
Stock available
XMR01
S type insert, Arbor mounting

ae
Type Stock

50 63 63 63 63 80 100
ap
1.4 1.4 1.4 1.8 1.8 1.8 1.8
ae
8.8 8.8 8.8 11.7 11.7 11.7 11.7
L
40 40 50 40 50 63 50
d
22 22 27 22 27 27 32

4 6 6 5 5 5 6 A A A A A A B
Weight (kg)
0.3 0.5 0.6 0.5 0.6 0.9 1.8
XMR01
-050-A22-SD09-04 -063-A22-SD09-06 -063-A27-SD09-06 -063-A22-SD12-05 -063-A27-SD12-05 -080-A27-SD12-05 -100-B32-SD12-06
Stock available
Applicable tool D9-10/D14-18
B 119
Milling
Spare parts
Tool type
XMR01-SD09 XMR01-SD12
Insert Screw
Clamp Screw
Clamp
Wrench
I60M3.508TT
I60M48.4
I60M48.4
WD-204
WT10IP WT15IP
WT15IP
B
Basic dimensions(mm) Insert shape Type B

SDMT09T312-DM SDMT120412-DM
15 15
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
Re
1.2 2.0
S1
3.97 4.76
D1
9.525 12.7

120 B
Indexable Milling Tools High feed milling cutters
Milling
XMR01
ae ap
W type insert, straight shank
Type Stock

20 20 20 25 25 25 32 32 32 40 40 40 40 40 40 50 50
ap
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 3.0 3.0
ae
3.8 3.8 3.8 4.35 4.35 4.35 4.35 4.35 4.35 4.35 4.35 4.35 5.66 5.66 5.66 6.8 6.8
L1
50 100 130 60 120 180 70 120 180 50 50 50 50 50 50 50 50
L
130 180 250 140 200 300 150 200 300 150 250 300 150 250 300 150 250
d
20 20 20 25 25 25 32 32 32 32 32 32 32 32 32 32 32
Number of teeth Z
2 2 2 2 2 2 3 3 3 3 3 3 2 2 2 2 2
Weight (kg)
0.2 0.3 0.8 0.4 0.6 1.0 0.8 1.0 1.6 0.9 1.5 1.8 0.9 1.5 1.9 1.9 2.5
B
XMR01
-020-G20-WP05-02-M -020-G20-WP05-02-L -020-G20-WP05-02-XL -025-G25-WP06-02-M -025-G25-WP06-02-L -025-G25-WP06-02-XL -032-G32-WP06-03-M -032-G32-WP06-03-L -032-G32-WP06-03-XL -040-G32-WP06-03-M -040-G32-WP06-03-L -040-G32-WP06-03-XL -040-G32-WP08-02-M -040-G32-WP08-02-L -040-G32-WP08-02-XL -050-G32-WP09-02-M -050-G32-WP09-02-L
Stock available
Spare parts
Clamp/Insert screw Tool type
XMR01-WP05 XMR01-WP06 XMR01-WP08 XMR01-WP09 I60M3.508TT I60M48.4 I60M513 WT10P WT15P --
Clamp
Wrench
--
--
WD-208
WT20IT
B 121
Milling
XMR01

W type insert, Arbor mounting
ae ap
B
Type Stock

50 50 63 63 80 100 125 160 63 80 100 125 160
ap
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 3.0 3.0 3.0 3.0 3.0
ae
4.35 5.66 5.66 5.66 5.66 5.66 5.66 5.66 6.8 6.8 6.8 6.8 6.8
L
50 50 50 50 63 63 63 63 50 63 63 63 63
d
22 22 22 27 27 32 40 40 22 27 32 40 40

4 3 4 4 5 6 7 8 3 4 5 6 7 A A A A A B B B A A B B B
Weight (kg)
0.4 0.4 0.7 0.7 1.5 2.2 3.5 6.0 0.7
XMR01
-050-A22-WP06-04 -050-A22-WP08-03 -063-A22-WP08-04 -063-A27-WP08-04 -080-A27-WP08-05 -100-B32-WP08-06 -125-B40-WP08-07 -160-B40-WP08-08 -063-A22-WP09-03 -080-A27-WP09-04 -100-B32-WP09-05 -125-B40-WP09-06 -160-B40-WP09-07
1.4 2.1
3.7 6.3
Stock available
Spare parts
Clamp/Insert screw Tool type
XMR01-WP06 XMR01-WP08 XMR01-WP09 I60M48.4 I60M513 I60M513 -WD-208 WD-208 WT15S ---WT20IT
Clamp
Wrench
B 122

Milling

WPGT050315ZSR WPGT060415ZSR WPGT080615ZSR WPGT090725ZSR
11 11 11 11
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
Re
1.5 1.5 1.5 2.5
S1
3.5 4.2 6.35 7
D1
7.94 9.525 12.85 15
B

123 B
Milling
Applicable insert
gin K g mar Cuttin
Approximate R in machining program

Approximate R(mm)
2 2.5 2.0 4.0 2.5 4.0
Cutting margin K(mm)

0.5 0.7 0.7 1.2 0.87 0.93 Piont R in programming
g marg Cuttin
B
in K
Piont R in programming
Pre-hole diameter Hole diameter to be machined
Reduce the feed rate in ramp and helical machining operations. Set the axial feed rate below 0.2mm/rev in drilling operation. Be careful ! Long chippings may y out in drilling operation. The cutting depth of each rotation can't exceed the maximum cutting depth ( ap ) The S type insert not only is applied in the machining operations mentioned above, but also able to be used for plunge milling.
Selection guide for XMR01 series XMR01 series tools ( install SDinserts) possess perfect edge strength and excellent economical efciency, have more advantages in face milling. XMR01 series tools ( install WPinserts) possess good capability of chip removal, have more advantages in cavity milling.
B 124
Milling tool diameter
Different machining styles
Ramp machining

Workpiece material Hardness HB Insert grade Cutting speed (m/min)
170(120-220) 150(100-200)
Milling
30/32/35 Axial cutting depth
0.8~1.2
25 Axial cutting depth

0.6~1.0
Feed rate per tooth

0.8~1.2
Feed rate per tooth

1.0~1.4
Soft steel Carbon Steel
HB180 HB180-280 HB280-350 HB350
YBM351
P M K
Alloy steel Alloy tool steel
YBM351
130(80-180)
0.4~0.8
0.8~1.2
0.6~1.0
1.0~1.4
pre-hardened steel
HRC35
YBM351
120(80-160)
0.4~0.8
0.6~1.0
0.6~1.0
0.8~1.2
Stainless steel
HB270
YBM351
120(80-160)
0.6~1.0
0.6~1.0
0.8~1.2
0.8~1.2
B
Common cast Iron
Tensile strength 350MPa Tensile strength 800MPa
YBG302
150(100-200)
0.6~1.0
1.0~1.4
0.8~1.2
1.2~1.6
Nodular cast iron
YBG302
120(80-160)
0.4~0.8
0.8~1.2
0.6~1.0
1.0~1.4

Workpiece material Hardness HB Insert grade 40 50/63 80/100 Cutting speed Axial cutting Feed rate Axial cutting Feed rate Axial cutting Feed rate (m/min) depth per tooth depth per tooth depth per tooth
170(120-220) 150(100-200) 0.8~1.2 1.0~1.4 1.1~1.5 1.1~1.5 1.0~1.5 1.0~1.5
Soft steel Carbon steel
HB180 HB180-280 HB280-350 HB350
YBM351
P M K
Alloy steel Alloy tool steel
YBM351
130(80-180)
0.6~1.0
1.0~1.4
0.9~1.3
1.1~1.5
0.8~1.3
1.0~1.5
Pre-hardened steel
HRC35
YBM351
120(80-160)
0.6~1.0
0.8~1.2
0.9~1.3
0.9~1.3
0.8~1.3
0.8~1.3
Stainless steel
HB270
YBM351
120(80-160)
0.8~1.2
0.8~1.2
1.1~1.5
0.9~1.3
1.0~1.5
0.8~1.3
Common cast iron
Tensile strength 350MPa Tensile strength 800MPa
YBG302
150(100-200)
0.8~1.2
1.2~1.6
1.1~1.5
1.3~1.7
1.0~1.5
1.2~1.7
Nodular cast iron
YBG302
120(80-160)
0.6~1.0
1.0~1.4
0.9~1.3
1.1~1.5
0.8~1.3
1.0~1.5
125 B
XMR01 series milling tools

Major cutting force (resultant cutting force) Indexable milling tools Axial force
Radial force
Feed rate of worktable
The feature of high feed tool is to resolve the major cutting force to the axial direction, greatly reduce the radial cutting force, thus improve tools capability of shock resistance. In addition, this structure can effectively reduce the vibration in long overhang milling application.
126 B
Indexable Milling Tools T-slot milling tools
Milling
Kr:90o
Weldon shank
TMP01
Type Stock

21 25 32 40 50 60
D1
25 25 32 32 40 50
d
10 12 15 19 25 32
L1
100 100 110 125 140 160
L2
32 35 45 55 65 80
L3
9 11 14 18 22 28
Number T-slot Number of teeth of insert specification Z

1 1 2 2 2 2 2 2 4 4 4 6
B
T-slot milling tools
TMP01
-021-XP25-MP06-01 -025-XP25-MP06-01 -032-XP32-MP08-02 -040-XP32-MP12-02 -050-XP40-MP12-02 -060-XP50-MP12-02
12
14
18 22
28 36
Stock available
Spare parts
Screw Tool type
TMP01-021-XP25-MP06-01 TMP01-025-XP25-MP06-01 TMP01-032-XP32-MP08-02 TMP01-040-XP32-MP12-02 TMP01-050-XP40-MP12-02 TMP01-060-XP50-MP12-02 I60M2.55.5 I60M2.55.5 I60M37 I60M510 I60M510 I60M510 -WT20IT
Wrench
WT07IP WT10IP
---
127 B
Milling

6.35 8.3 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Routh feed milling cuttes
L
6.35 8.3 12.7
s
3.18 3.18 4.76
d
2.8 3.4 5.56
r
0.4 0.5 0.8

Workpiece before machining

Workpiece material Grey cast iron Insert grade Cutting parameters V(m/min)
80~160
f(mm/z)
0.05~0.2
Cooling
Wet / Dry
YBG302
128 B
Indexable Milling Tools Helical end mill

Kr:90o
Milling
HMP01
Weldon shank
Type Stock R

B
Helical end mill
40 50
d
40 40
e
55 55
L1
95 95
L
175 175
Number of insert Number of flute Shank type APKT SPMT Z 150412- 120408-
2 4 1 2 5 10 Weldon shank Weldon shank
HMP01 -04055-XP40-SP12-02
-05055-XP40-SP12-04
Stock available
Spare parts
Diameter D
40 50
Screw
Wrench
I60M510 I60M513
WT20IS WT20IS
129 B
Milling
Helical end mill

Kr:90o
HMP01
JT shank/BT shank(Example is JT shank)
B
Routh feed milling cuttes
Type Stock R

50 63 63 63 80 80 50 63 63 63 80 80
e
84 74 104 134 104 144 84 74 104 134 104 144
L1
145 135 165 195 165 205 145 135 165 195 165 205
L
246.75 236.75 266.75 296.75 266.75 306.75 246.8 236.8 266.8 296.8 266.8 306.8
Number of flute Z
4 4 4 4 4 4 4 4 4 4 4 4
Number of insert
APKT 150412- 2 2 2 2 2 2 2 2 2 2 2 2 SPMT 120408- 16 14 20 26 20 28 16 14 20 26 20 28
Shank type
JT JT
JT JT JT JT BT BT BT BT BT BT
HMP01
-05084-JT50-SP12-04 -06374-JT50-SP12-04 -063104-JT50-SP12-04 -063134-JT50-SP12-04 -080104-JT50-SP12-04 -080144-JT50-SP12-04 -05084-BT50-SP12-04 -06374-BT50-SP12-04 -063104-BT50-SP12-04 -063134-BT50-SP12-04 -080104-BT50-SP12-04 -080144-BT50-SP12-04
Stock available
Spare parts
Diameter D
50 63 80
Screw
Wrench
I60M513 I60M513 I60M513
WT20IS WT20IS WT20IS
130 B
Indexable Milling Tools Helical endmills with interchangeable heads
Milling
Kr:90o
HMP01 EC
JT shank/BT shank(Example is JT shank)
Type Stock R

50 63 63 63 80 80 50 63 63 63 80 80
e
84 74 104 134 104 144 84 74 104 134 104 144
L1
145 135 165 195 165 205 145 135 165 195 165 205
L
246.75 236.75 266.75 296.75 266.75 306.75 246.8 236.8 266.8 296.8 266.8 306.8
Number of insert Number of flute APKT SPMT Z 150412- 120408-

4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 2 2 2 16 14 20 26 20 28 16 14 20 26 20 28
Shank type
JT JT
JT JT JT JT BT BT BT BT BT BT
HMP01
-05084EC-JT50-SP12-04 -06374EC-JT50-SP12-04 -063104EC-JT50-SP12-04 -063134EC-JT50-SP12-04 -080104EC-JT50-SP12-04 -080144EC-JT50-SP12-04 -05084EC-BT50-SP12-04 -06374EC-BT50-SP12-04 -063104EC-BT50-SP12-04 -063134EC-BT50-SP12-04 -080104EC-BT50-SP12-04 -080144EC-BT50-SP12-04
Helical endmills with interchangeable heads
Stock available
Spare parts
Diameter D Insert screw Screw of interchangeable head Wrench of insert screw Wrench of Interchangeable interchangeable head head
50 63 80
I60M513 I60M513 I60M513
M1050 M1050 M1255
WT20IS WT20IS WT20IS
WH80L WH80L WH100L
050EC 063EC 080EC
131 B
Milling

APKT150412-PM APKT150412-KM
16.33 16.33
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.W
12.7 12.7
S
4.76 4.76
d
5.4 5.4
r
1.2 1.2
Indexable milling tools Helical endmills with interchangeable heads


SPMT120408-PM SPMT120408-KM
12.7 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7
S
4.76 4.76
d
5.5 5.5
r
0.8 0.8

132 B
Milling
Ae
A Slot milling
Ae
B Square shoulder milling

Ae
C Narrow shoulder milling
Ap
Ap
Ap
Ae=D Ap=0.5D(cast iron) Maximum 12mm(steel)
Ae=0.5D Ap=1.5D(cast iron) 1.0D(steel)
Ae=0.1D ApMaximum cutting length

Workpiece material Hardness HB Insert grade Cutting parameters Cutting speed(m/min)
80(60-90) Low-carbon steel Soft steel 180 YBG302 90(70-120) 90(70-120) 70(60-100)
Feed speed(mm/z)
0.25(0.1-0.35) 0.3(0.15-0.4) 0.3(0.15-0.4) 0.2(0.1-0.35) 0.25(0.15-0.35) 0.25(0.15-0.35) 0.15(0.08-0.25) 0.2(0.1-0.35) 0.2(0.1-0.35) 0.2(0.1-0.35) 0.25(0.15-0.35) 0.25(0.15-0.35)
Operation (figure)
A B C A B C A B C A B C
Helical endmills with interchangeable heads
180-280
YBG302
80(60-120) 90(70-120) 50(40-80)
Alloy tool steel
280-350
YBG302
60(50-100) 70(50-100) 70(50-100)
Cast iron
180-250
YBG152 YBG302
80(60-120) 90(80-120)
133 B
Milling
CMZ01

Kr:30o
Chamfer milling tools
Straight shank
Weldon shank
B
Type Stock

Indexable milling tools Chamfer milling tools
12 25 32 12 25 32
d
20 25 32 20 25 32
L
180 180 180 100 100 100
L1
40 40 40 40 40 40
Number of teeth Z
1 2
3 1 2 3
Weight (kg)
0.2 0.8
1.1 0.2 0.6 1.0
CMZ01
Straight shank
-012-G20-SP12-01 -025-G25-SP12-02 -032-G32-SP12-03
Weldon shank
-012-XP20-SP12-01 -025-XP25-SP12-02 -032-XP32-SP12-03
Stock available
Spare parts
Diameter D
12-32
Screw
Wrench
I43M511
WT20IS
134 B
Indexable Milling Tools Chamfer milling tools

Kr:45o
Milling
CMA01
Straight shank
Weldon shank
B
Type Stock

12 25 32 12 25 32
d
20 25 32 20 25 32
L
180 180 180 100 100 100
L1
40 40 40 40 40 40
Number of teeth Z
1 2 3 1 2 3
Weight (kg)
0.2 0.8
1.1 0.2 0.6 1.0
CMA01
Straight shank
-012-G20-SP12-01 -025-G25-SP12-02 -032-G32-SP12-03
Weldon shank
-012-XP20-SP12-01 -025-XP25-SP12-02 -032-XP32-SP12-03
Stock available
Spare parts
Diameter D
12-32
Screw
Wrench
I43M511
WT20IS
135 B
Milling
CMD01
Kr:60o
Straight shank
Weldon shank
B
Type Stock

Indexable milling tools Chamfer milling tools
12 25 36 12 25 36
d
20 25 32 20 25 32
L
180 180 180 100 100 100
L1
40 40 40 40 40 40
Number of teeth Z
1 2
3 1 2 3
Weight (kg)
0.2 0.8
1.0 0.2 0.6 1.0
CMD01
Straight shank
-012-G20-SP12-01 -025-G25-SP12-02 -036-G32-SP12-03
Weldon shank
-012-XP20-SP12-01 -025-XP25-SP12-02 -036-XP32-SP12-03
Stock available
Spare parts
Diameter D
12-32
Screw
Wrench
I43M511
WT20IS
136 B

Milling

SPMT120408
12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
12.7
r
0.8
S
4.76
d
5.5
B


YBM251 YBC301 Low-carbon steel Soft steel 180 YBM351 YBG302 YC30S YBM251 YBC301
Cutting parameters Cutting speed(m/min)

180(100250) 150(100200) 120(80150) 160(100220) 130(100180) 100(60150) 120(80180) 100(80150) 80(60120) 120(80180) 100(80150) 80(60120) 130(100180)
Feed speed(mm/z)
0.25 (0.1-0.4) 0.3 (0.1-0.5) 0.4 (0.1-0.5) 0.3 (0.1-0.4) 0.3 (0.1-0.5) 0.4 (0.1-0.5) 0.3 (0.1-0.4) 0.3 (0.1-0.5) 0.4 (0.1-0.5) 0.3 (0.1-0.4) 0.3 (0.1-0.5) 0.4 (0.1-0.5) 0.4 (0.1-0.5)
180280
YBM351 YBG302 YC30S YBM251 YBC301
Alloy tool steel
280350
YBM351 YBG302 YC30S YBM251 YBC301
M K
Stainless steel
270
YBM351 YBG302 YC30S
Cast iron
180-250
YBG302
137 B
Milling
SEET-CF
Page B150
Inserts for face milling
SEET-CM
B150
SEET-CR
B150
SEET-DF
B150
SEET-DM
B150
SEET-DR
B150
SEET-EF
B150
SEET-EM
B150
B
Milling inserts
SEET-LH
Page B150
SEET-W
B150
SEK(E)N B152
SEKR B152
OFKT-DF B146
OFKT-DM B146
OFKT-LH B146
OFKR-DF B147
OFKR-DM
Page B147
SNKN
B158
HNEX-DF
B144
HNEX-DM
B144
HNEX-DR
B144
LNKT-ZR
B145
LNE32.534
B145
SPKW
B154
SPKT
Page B154
SPN B153
SPKR-GM B155
SPEX B155
SPMR B156
SPN B157
TPKN B158
TPGN B159
TPUN Page B160
TPMR B160
SEETPER-PF SEETPER-PM SEETPER-PR B151 B151 B151
RCKT-DM
B147
RCKT-DR B147
RDKW B148
Inserts for square shoulder milling
APKT-PF Page B142
APKT-PM B142
APKT-PR B142
APKT-LH B142
APMTPDR
B143
APMTPDER
B143
138 B
Milling
ZOHX-GM B163
Inserts for profile milling
ZDET Page B162
ZPNT B163
SPMT/SDMT B154/B149
ROHX
B148
XPHT-GM
B161
ZOHX-GF B163
Inserts for side and face milling
Inserts for h igh feed milling
B
Milling inserts
XSEQ
Page B162
MPHT
B146 Page
SDMT-DM
B149
WPGT
B161
Inserts for T-slot milling
Inserts for helical endmills
MPHT
Page B146 Page
APKT-PM/KM
B144
SPMT-PM/KM
B154
Inserts for chamfer milling
SPMT
Page B154
139 B
Milling
Insert Shape / Code
Indexable milling inserts code key

With/Without Section plane of Insert Code With/Without With/Without Code With/Without chipbreaker chipbreaker hole hole With With With Without Single-side Without Double-side Without Single-side Without Double-side Without Without
Metric
Section plane of Insert
Without Single-side Without Double-side With With With Without Single-side Double-side Special
B
Milling inserts Others
With With With With With
Insert shape
Chipbreaker and clamping system
Clearance Clearance Code Code angle angle
Clearance angle of main cutting edge
Tolerance
Code
Nose height M Inscribed circle Thickness S (Reference) details of M-class tolerance ( identified by D1 Tolerance(mm) Tolerance(mm) Tolerance(mm) shape and size) Nose height tolerance(mm)
Inscribed Regular Diamond Diamond Diamond Square circle triangle with 80o with 55o with 35o Round
Tolerance of Inscribed Circle D1(mm)

Diamond Diamond Diamond Inscribed Regular Square with 80o with 55o with 35o Round circle triangle
Other clearance angle
140 B
Milling
Thickness is defined as height from bottom of insert to the highest part of cutting edge.
Insert shape
Diameter of IC
Code
Insert thickness(mm)
B
Milling inserts
Insert thickness
Wiper
Chamfer (mm)
Chipbreaker code
Cutting direction
Right hand Left hand Neutral Others
Others
No mark
141 B
Milling
AP
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type L
12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 12.24 12.24 17.877 12.24 12.24 17.877
I.W
6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 6.5 6.5 9.33 6.5 6.5 9.33
S
3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 3.6 3.6 5.76 3.6 3.6 5.76
d
2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 2.8 2.8 4.4 2.8 2.8 4.4
r
0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 0.8

142 B
Milling
AP
Stainless steel

APMT1135PDR
11.25
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.W
6.2
S
3.5
d
2.8
r
0.8
B
Milling inserts
APMT160408PDER
17.25
9.25
4.76
4.4
0.8

143 B
Milling
AP
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type L
APKT150412-PM APKT150412-KM
16.33 16.33
I.W
12.7 12.7
S
4.76 4.76
d
5.4 5.4
r
1.2 1.2

HN
Stainless steel

HNEX090512-DF
9.26
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
15.875
S
5.56
R
1.2
HNEX090512-DM
9.26
15.875
5.56
1.2
HNEX090512-DR
9.26
15.875
5.56
1.2

144 B
Milling
LN
Stainless steel

LNKT2510-ZR
25
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.W
18
S
9.525
d
5.5
B
Milling inserts

LN
Stainless steel

LNE32.534
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.W
S
4.76
d
4.4
r
1.6
15.875 9.525

145 B
Milling
MP
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type I.C
6.35 8.3 12.7
L
6.35 8.3 12.7
S
3.18 3.18 4.76
d
2.8 3.4 5.56
r
0.4 0.5 0.8

OF
Stainless steel

OFKT05T3-DF
5.26
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7
S
3.97
d
4.4
R
0.5
OFKT05T3-DM
5.26
12.7
3.97
4.4
0.5
OFKT05T3-LH
5.26
12.7
3.97
4.4
0.5

146 B
Milling
OF
Stainless steel

OFKR0704-DF
7.45
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
17.94
S
4.76
R
0.8
B
Milling inserts
OFKR0704-DM
7.45
17.94
4.76
0.8

RC
Stainless steel

RCKT10T3MO-DM RCKT1204MO-DM RCKT1204MO-DR RCKT1606MO-DM RCKT1606MO-DR RCKT2006MO-DR
5 6 6 8 8 10
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
10.0 12.0 12.0 16 16 20
S
3.97 4.76 4.76 6.35 6.35 6.35
d
4.4 4.0 4.0 5.56 5.56 6.55
Recommended grade and always stock available Recommended grade and produce according to order Available grade and always stock available Available grade and produce according to order
147 B
Milling
RD
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type R
RDKW0803MO RDKW10T3MO RDKW1204MO RDKW1605MO RDKW2006MO
4 5 6 8 10
I.C
8 10 12 16.0 20.0
S
3.18 3.97 4.76 5.56 6.35
d
3.4 4.4 4.4 5.5 6.5

RO
Stainless steel

ROHX1203 ROHX1604 ROHX2005
12 16 20
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
8.5 11.3 14.1
S
3 4 5
d
4 5 5

148 B
Milling
SD
Stainless steel
Basic dimensions(mm) Insert shape Type r

SDMT090308
0.8
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
S
3.18
d
4.4
15
9.525 9.525
B
Milling inserts

SD
Stainless steel

15 15
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
Re
1.2 2.0
S1
3.97 4.76
D1
9.525 12.7

149 B
Milling
SE
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type L
SEET12T3-DF SEET12T3-CF SEET12T3-EF SEET12T3-DM SEET12T3-CM SEET12T3-EM SEET12T3-DR SEET12T3-CR
I.C
S
3.97 3.97 3.97 3.97 3.97 3.97 3.97 3.97
d
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1
bs
2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55
13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40
SEET12T3-LH
13.40 13.40
3.97
4.1
2.55
SEET12T3-W
17.82 13.40
3.97
4.1
9.46
500

150 B
Milling
SE
Stainless steel

SEET09T308PER-PF
9.525
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
9.525
S
4.01
d
3.3
r
0.8
B
Milling inserts
SEET09T308PER-PM 9.525
9.525
4.01
3.3
0.8
SEET09T308PER-PR
9.525
9.525
4.01
3.3
0.8
SEET120308PER-PF 13.308 13.308
4.04
4.1
0.8
SEET120308PER-PM 13.308 13.308
4.04
4.1
0.8
SEET120308PER-PR 13.308 13.308
4.04
4.1
0.8

151 B
Milling
SE
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type L
SEEN1203AFTN SEKN1203AFFN SEKN1203AFN SEKN1203AFTN SEKN1504AFN SEKN1504AFTN
12.7 12.7 12.7 12.7 15.875 15.875
I.C
12.7 12.7 12.7 12.7 15.875 15.875
S
3.18 3.18 3.18 3.18 4.76 4.76

SE
Stainless steel

SEKR1203AFN SEKR1504AFN
12.7 15.875
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 15.875
S
3.18 4.76

152 B
Milling
SPN
Stainless steel

SPKN1203EDER SPKN1203EDEL SPKN1203EDFR SPKN1203EDFL SPKN1203EDSKR SPKN1203EDSKL SPKN1203EDTKR SPKN1203EDTKL SPKN1203EDS31R SPKN1203EDS31L SPKN1203EDT31R SPKN1203EDT31L SPKN1504EDER SPKN1504EDEL SPKN1504EDFR SPKN1504EDFL SPKN1504EDSKR SPKN1504EDSKL SPKN1504EDTKR SPKN1504EDTKL
12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875 15.875
S
3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76 4.76
be
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
bs
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
B
Milling inserts
SPKN1504EDS32R 15.875 SPKN1504EDS32L 15.875 SPKN1504EDT32R 15.875 SPKN1504EDT32L 15.875

Available grade and always stock available Order guide: SPKN1203EDT3
1R chamfering angle 20, chamfering width 0.15mm. if order other edge shape, see the inserts code key standard
153 B
Milling
SP
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type r
SPMT060304 SPMT120408
0.4 0.8
L
6.35 12.7
I.C
6.35 12.70
S
3.18 4.76
d
2.8 5.5
11 11
SPMT120408-PM SPMT120408-KM
0.8 0.8
12.7 12.7
12.70 12.70
4.76 4.76
5.5 5.5
11 11
SPKT1204EDR
--
12.7
12.7
4.76
5.56
11

SPW
Stainless steel
Basic dimensions(mm) Insert shape Type r

SPKW1204EDFR SPKW1204EDSR
-----
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
12.7 12.7
I.C
12.7 12.7
S
4.76 4.76
d
5.56 5.56
11 11

154 B
Milling
SPR
Stainless steel

SPKR1203EDR-GM SPKR1203EDL-GM SPKR1504EDR-GM SPKR1504EDL-GM
12.7 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7
S
3.18 3.18 4.76 4.76
be
1 1 1 1
bs
1.4 1.4 1.4 1.4
B
Milling inserts
15.875 15.875 15.875 15.875

SPX
Stainless steel
Basic dimensions(mm) Insert shape Type A

SPEX1203EDL-1 SPEX1203EDR-1 SPEX1504EDL-1 SPEX1504EDR-1
15 15
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7
I.W
12.7 12.7
S
3.18 3.18
bs
10 10 10 10
R
500 500 500 500
18.2 15.875 15.875 4.76 18.2 15.875 15.875 4.76
Recommended grade and always stock available Recommended grade and produce according to order Available grade and always stock available Available grade and produce according to order
155 B
Milling
SP
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type L
SPMR090304 SPMR09T304 SPMR090308 SPMR120304 SPMR120308 SPMR120312
9.525 9.525 9.525 12.7 12.7 12.7
I.C
9.525 9.525 9.525 12.7 12.7 12.7
s
3.18 3.97 3.18 3.18 3.18 3.18
r
0.4 0.4 0.8 0.4 0.8 1.2

156 B
Milling
SP
Stainless steel

SPUN090304 SPUN090308 SPUN120304 SPUN120308 SPUN120312 SPUN150408 SPUN150412 SPUN190408 SPUN190412 SPUN190416 SPGN090304 SPGN090308 SPGN120308 SPGN120404 SPGN120408 SPGN120412 SPGN150404 SPGN150408 SPGN190408 SPGN190416
9.525 9.525 12.7 12.7 12.7 15.875 15.875 19.05 19.05 19.05 9.525 9.525 12.7 12.7 12.7 12.7 15.875 15.875 19.05 19.05
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
9.525 9.525 12.7 12.7 12.7 15.875 15.875 19.05 19.05 19.05 9.525 9.525 12.7 12.7 12.7 12.7 15.875 15.875 19.05 19.05
s
3.18 3.18 3.18 3.18 3.18 4.76 4.76 4.76 4.76 4.76 3.18 3.18 3.18 4.76 4.76 4.76 4.76 4.76 4.76 4.76
r
0.4 0.8 0.4 0.8 1.2 0.8 1.2 0.8 1.2 1.6 0.4 0.8 0.8 0.4 0.8 1.2 0.4 0.8 0.8 1.6
B
Milling inserts

157 B
Milling
SN
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type L
SNKN1204ENN SNKN1504ENN SNKN1904ENN
12.7
I.C
12.7
S
4.76 4.76 4.76
be
0.9 0.9 1.0
bs
1.5 1.5 1.5
15.875 15.875 19.05 19.05

TP
Stainless steel

TPKN2204PDFR TPKN2204PDFL TPKN2204PDR TPKN2204PDL TPKN2204PDTR TPKN2204PDTL
22 22 22 22 22 22
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12.7 12.7 12.7 12.7 12.7 12.7
S
4.76 4.76 4.76 4.76 4.76 4.76
be
1.4 1.4 1.4 1.4 1.4 1.4
bs
0.7 0.7 0.7 0.7 0.7 0.7
an
11 11 11 11 11 11

158 B
Milling
TP
Stainless steel

TPGN090204 TPGN090208 TPGN110204 TPGN110304 TPGN110308 TPGN160304 TPGN160308 TPGN160312 TPGN160316 TPGN220308 TPGN220404 TPGN220408 TPGN220412 TPGN270408
9.6 9.6 11 11 11 16.5 16.5 16.5 16.5 22 22 22 22 27.5
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
5.56 5.56 6.35 6.35 6.35 9.525 9.525 9.525 9.525 12.7 12.7 12.7 12.7 15.875
s
2.38 2.38 2.38 3.18 3.18 3.18 3.18 3.18 3.18 4.76 4.76 4.76 4.76 4.76
r
0.4 0.8 0.4 0.4 0.8 0.4 0.8 1.2 1.6 0.8 0.4 0.8 1.2 0.8
B
Milling inserts

159 B
Milling
TP
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type L
TPUN110208 TPUN110304 TPUN110308 TPUN160304 TPUN160308 TPUN160312 TPUN160408 TPUN160412 TPUN220404 TPUN220408 TPUN220412 TPUN220416 TPMR090204 TPMR110304 TPMR110308 TPMR160304 TPMR160308 TPMR160312 TPMR220412 TPMR330916
11 11 11 16.5 16.5 16.5 16.5 16.5 22 22 22 22 9.6 11 11 16.5 16.5 16.5 22 33
I.C
6.35 6.35 6.35 9.525 9.525 9.525 9.525 9.525 12.7 12.7 12.7 12.7 5.56 6.35 6.35 9.525 9.525 9.525 12.7 19.05
s
2.38 3.18 3.18 3.18 3.18 3.18 4.76 4.76 4.76 4.76 4.76 4.76 2.38 3.18 3.18 3.18 3.18 3.18 4.76 9.52
r
0.8 0.4 0.8 0.4 0.8 1.2 0.8 1.2 0.4 0.8 1.2 1.6 0.4 0.4 0.8 0.4 0.8 1.2 1.2 1.6

160 B
Milling
WP
Steel Workpiece material Re D1 S1 Cast iron
Stainless steel

11 11 11 11
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
Re
1.5 1.5 1.5 2.5
S1
3.5 4.2 6.35 7
D1
7.94 9.525 12.85 15
B
Milling inserts

XP
Stainless steel

XPHT16R0803-GM XPHT20R10T3-GM XPHT25R1204-GM XPHT30R1506-GM XPHT32R1606-GM XPHT40R2007-GM XPHT50R2507-GM
8 10 12.5 15 16 20 25
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
d
3.1 4.0 4.7 5.8 5.8 6.8 9.2
S
3.18 3.97 4.76 6.35 6.35 7.94 7.94
9 9 9 11 9 9 9
L
16 20 25 30 32 40 50

161 B
Milling
XS
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
B
Milling inserts
Insert shape
Type I.C
XSEQ1202 XSEQ1203 XSEQ12T3 XSEQ1204 XSEQ12T4
12.7 12.7 12.7 12.7 12.7
L
12.7 12.7 12.7 12.7 12.7
S
2.6 3.0 3.8 4.0 4.8
d
5.0 5.0 5.0 5.0 5.0

ZD
Stainless steel

ZDET08T2CYR10 ZDET1103CYR12.5 ZDET13T3CYR16
6.75 8.5 10.5
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
8.4 10.6 13.2
S
2.78 3.18 3.97
R
10 12.5 16
d
2.8 2.8 4.4
14 14 14

162 B
Milling
ZP
Stainless steel

ZPNT2204CY(R20) ZPNT2204CY(R25) ZPNT2204CY(R31)
12.7 12.7 12.7
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
L
16.1 16.9 17.6
S
4.76 4.76 4.76
R
20 25 31.5
d
5.56 5.56 5.56
11 11 11
B
Milling inserts

ZO
Stainless steel

ZOHX1203-GF ZOHX1604-GF ZOHX2005-GF ZOHX2506-GF ZOHX3007-GF ZOHX3207-GF ZOHX1203-GM ZOHX1604-GM ZOHX2005-GM ZOHX2506-GM ZOHX3007-GM ZOHX3207-GM
6 8 10 12.5 15 16 6 8 10 12.5 15 16
CVD Coating
PVD Coating
Cermet
YNG151 YNG151C
Cemented carbide
YC30S YD051 YD101 YD201
I.C
12 16 20 25 30 32 12 16 20 25 30 32
S
3 4 5 6 7 7 3 4 5 6 7 7
d
4 5 5 6 8 8 4 5 5 6 8 8

163 B
Milling

Technical information
Common problems and solutions for milling

Main points of solution and Selection inspection of tool material
Material with higher hardness Material with perfect toughness Cutting speed
Cutting condition
Feed rate Cutting depth Change the diameter and width of milling tools Cutting liquid Rake angle Approach angle Strength of cutting edge
Tool shape
Number of teeth Increase the width of chip pocket Examine the geometry shape of Minor cutting edge. Check the run-out of end face Improve the rigidity of tool
Machine clamping system

Clamping system of workpiece Overhang of tool Power, gap
B
Fault content
Severe abrasion of clearance face Severe abrasion of rake face
Improper cutting condition Improper geometry shape of cutting edge Improper cutting condition Improper geometry shape of cutting edge Improper cutting
Fracture of tool nose Machining precision Other
Fracture condition of cutting Improper geometry edge

Improper cutting condition
shape of cutting edge
Thermal cracking
Improper geometry shape of cutting edge Improper cutting condition Improper geometry shape of cutting edge Abrasion of tool Great vibration of milling tool Improper cutting condition Improper geometry shape of cutting edge Improper cutting condition Improper geometry shape of cutting edge
Build-up edge Coarse surface Causing burr
Wiper
Side collapse
Worse planeness Improper geometry shape of cutting edge and parallelism
Great vibration Chippings are twisting and jamming
Cutting condition Improper technology Improper cutting condition Improper geometry shape of cutting edge
164 B

Milling
Difference and selection between down milling and up milling
Vf
Vf
B
magnified X Up milling Dowm milling
magnified Y
Climb milling (also called down milling): the feed direction of workpiece is the same as that of the milling rotation at the connecting position. Conventional milling (also called up milling): the feed direction of workpiece is opposite to that of the milling rotation at the connecting position.
In down milling, the major force of cutting edge borne is compressive stress; in up milling, cutting edge bears the tensile stress. The compressive strength of cemented carbide material is larger than its tensile strength. In down milling, chip becomes thin from thick gradually , cutting edge and workpiece press each other. The friction between edge and workpiece is small, thus can reduce the abrasion of edge , the hardening of workpiece surface and the surface roughness (Ra). In up milling, chip becomes thick from thin gradually. When insert cutting into the workpiece, it generates strong friction and more heat than down milling, and make workpiece surface harden. In up milling, because horizontal direction of cutting force that milling cutter conducting on workpiece is opposite to the feed direction of workpiece, therefore the lead screw of worktable joints closely with one side of screw nut. In down milling, the direction of cutting force is same as the feed direction. When edges radial force on workpiece is big enough to some extend , the worktable will bounce left and right, thus make the gap fall behind. The gap will return to front side along with the continuing rotation of lead screw. At this moment the worktable stops motion, however it will bounce left and right again when the radial cutting force is big enough to some extend again. The periodical bounce of worktable will cause poor surface quality of workpiece and tool breakage. When use end mills for down milling, every time the edges begin the cutting at workpiece surface, therefore end mills are not suitable for machining the workpiece with hardened surface. Up milling is recommended for milling the thin-wall components or square milling with the demand of high precision.
165 B
Milling
Pitch selection
L

Pitch is the distance between one point on one cutting edge and the same point on the next edge. Milling cutters are mainly classified into coarse, close and extra close pitches,
Operational stability
(Low)
(Medium)
(High)
Coarse pitch
Differential pitch
Close pitch
Extra close pitch
B
When the milling width equal to diameter of cutter, the machining system is stable and main power of machine is sufficient, selecting coarse pitch can achieve high productive efficiency.
Indexable milling tools Technical information
General milling function and multiple mixed productions
When the milling width is less than diameter of cutter, cutting by maximum edges can achieve high productive efficiency.
Selection of approach angle

Approach angle 90 75 60 45 Round insert Feed rate per tooth
The approach angle is composed by insert and tool body, Chip thickness, cutting forces and tool-life are affected especially by the approach angle. Decreasing the approach angle reduces chip thickness and spreads the cutting area between cutting edge and workpiece for a given feed rate. A smaller approach angle also guarantee that it is stable entrying into or exiting workpiece, to protect the cutting edge and extend tool life. However this will increase higher axial cutting forces on the workpiece, thus is not suitable for machining thin workpiece such as thin plate.
Real maximum cutting depth
fz fz fz fz fz
hex=
hex=fzsinkr hex=0.96fz hex=0.86fz hex=0.707fz

i C 2 ( i C - 2 a p) 2 iC fz
166 B

Milling
General formula
Vc cutting speed(m/min) Dc nominal diameter of milling tool(mm) n spindle speed(rev/min) zn number of teeth Q metal removal rate(cm3/min)
Cutting speed
Vf feed rate of worktable ( feed speed)(mm/min) fz feed rate per tooth(mm/z) circumference ratio3.14 Tc machining time(min) fz feed rate per revolution (mm/rev)
Vc=
D c n 1000
(m/min)
B
Spindle speed
n=
1000 V c Dc
(rev/min)
Feed rate of worktable ( feed speed)
Vf = fz n z n (mm/min)
Feed rate per tooth
f z=
Vf nZn
(mm/z)
Feed direction
Feed rate per revolution
f n=
Vf n
Minor angle
(mm/rev)
Tooth shape
Feed rate per tooth(fz)
Machining time
Tc=
1000Vc Dc
(min)
Metal removal rate
Q=
a p a e V f 1000
(cm3/min)
167 B
Milling

Function of each part in face milling

Axial rake angle rf Approach angle
Kr Main angles of face mills

Rake angle R Radial rake angle rp
s Inclined angle of
cutting edge
B
Main angles of face mills

Designation
Axial rake angle Radial rake angle
Function
Effect
negative angle, excellent capability of chip removal Positive angle, good cutting performance
rf rp
Determining the chip direction Determining whether the cutting is light and fast or not Determining the chip thickness Determining whether the cutting is light and fast or not
Approach angle Kr Rake angle R
Krchip thicknessKrchip thickness

Poor cutting performance high strength of cutting edge Poor cutting performance high strength of cutting edge ()0(+) Good cutting performance low strength of cutting edge Good cutting performance low strength of cutting edge
Inclined angle of cutting edge Determining the chip ow
direction
()0(+)
Characteristics of different rake angles combined

Negative rake angle
0o
Double positive
Double negative
One positive, one negative
rf (+)
rf (-)
rf (+)
0 rake angle
Positive rake angle Axial rake angle Radial rake angle
+ rp (+) rp (-) rp (-)
rf rp
P
Applicable material machined
M K N S
168 B

Milling
Cutting performances of different approach angles

Approach angle Schematic diagram Instruction
Axial force is largest. It will bend when machining
45
thin-wall workpiece, and reduces the precision of workpiece. It is benefit to avoid fringe breakage of workpiece when machining cast iron
75
The main purpose is to resolve the radial cutting force, it is often used for general face milling.
B
90
The axial force is zero in theory, suitable for milling thin plate workpiece.
Wiper insert
It has axial and radial run out because
fz
of tools and inserts exist manufacturing
fn Rz
tolerance. The axial runout lead to poor surface roughness.
Solution
Aassembling wiper inserts
usage
The wiper insert must protrude below the other
Wiper insert
Common insert
inserts by 0.03-0.10 mm at axial direction, only that the wiping function can take into effect. Generally speaking, a cutter can just assemble only one wiper insert. If the diameter of cutter is much bigger or cutter's feed rate per revolution is bigger than the length of wiper edge, 2 to 3 wiper inserts can be assembled.
169 B
Milling

Selection of cutting width and tool cutting diameter in face milling
Generally speaking, the relation between cutting width and tool cutting diameter is Dc=(1.21.5) ae. In the machining practice, it need to avoid coincidence of tool center and workpiece center as much as possible.
B
(1.2 - 1.5)ae Dc=ae
DcTool cutting diameter aeCutting width
170 B
171 B
Milling
Selection guide for solid carbide end mills
Shape of tool Type of Tool Series of tool Machining operation Size of shape

GM series
2-flute flattened end mills with straight shank

d
Side face
Shoulder
Straight slot
10
D L H
Figure 1
Very suitable for slot milling

35o
Wide application.
D
D12 0~-0.020 12<D 0~-0.030
Figure 2
TiAIN
D
1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0
Coated
Ordering number
GM-2E-D1.0S GM-2E-D1.5S GM-2E-D2.0S GM-2E-D2.5S GM-2E-D3.0S GM-2E-D4.0S GM-2E-D1.0 GM-2E-D1.5 GM-2E-D2.0 GM-2E-D2.5 GM-2E-D3.0 GM-2E-D3.5 GM-2E-D4.0 GM-2E-D4.5 GM-2E-D5.0 GM-2E-D5.5 GM-2E-D6.0 GM-2E-D7.0 GM-2E-D8.0 GM-2E-D9.0 GM-2E-D10.0 GM-2E-D11.0 GM-2E-D12.0 GM-2E-D14.0 GM-2E-D16.0 GM-2E-D18.0 GM-2E-D20.0
Basic dimension(mm) d
4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 8 8 10 10 12 12 14 16 18 20
H
3 4 6 8 8 11 3 4 6 8 8 10 11 11 13 16 16 20 20 22 25 26 30 32 45 45 45
L
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 75 75 75 75 75 100 100 100
Number of teeth Z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2
Applicable material table

Workpiece material
Carbon steel Alloy steel Pre-hardened steelHardened steel ~40HRC ~50HRC ~60HRC ~68HRC Stainless steel
Very suitable Suitable
Cast iron, Nodular cast iron
Copper alloy
Aluminum alloy
Titanium alloy
Heat resistant alloy
Code key B176
Cutting parameters B239
Graphics category and identification B177
Non-standard tailor made B289-B290
Specification Workpiece material range Product features

Type, basic dimension, number of teeth and structure
Helical angle, coated and cutting diameter tolerance etc.

Code key, cutting parameters, graphics category and identification, non-standard tailor made
172 B
Milling
Solid carbide end mills overview Solid carbide end mills code key Graphics category and identification Detail specifications
GM series for general machining HM series for machining high hardness steel NM series for machining copper AL series for machining aluminum SM series for machining materials hard to cut
B174-B175 B176 B177 B178-B238 B178-B197 B198-B219 B220-B225 B226-B235 B236-B238 B239-B284 B285-B288 B289-B290
Recommended cutting parameters Technical information Order guide for non-standard products
173 B
Milling
Machining operation Number of teeth
2

Solid carbide end mills overview
Workpiece material
P
Type Shape Size range
Carbon steel, alloy steel Pre-hardened steel
M K
Stainless steel Cast iron Copper alloy
N
Aluminum alloy
S H
Heat resistant alloy High hardness steel
Page
Specification Cutting parameters
Geometry
GM-2E
1.0~20.0 3.0~20.0 1.0~20.0 3.0~20.0 6.0~20.0 6.0~20.0 0.5~5.0 0.3~3.0 R0.5~R10.0 R1.0~R10.0 R1.5~R10.0 R0.15~R1.5 R0.25~R2.5
B179 B239 B180 B239 B181 B240 B182 B240 B183 B241 B184 B242 B185 B243 B187 B245 B188 B246 B189 B246 B190 B247 B191 B248 B192 B249 B194 B251 B195 B252 B196 B252 B197 B253
B
General machining
GM-2EL GM-4E
Flattened 4
GM-4EL GM-6E
6
Indexable milling tools Solid carbide end mills Solid carbide end mills overview
GM-6EL
Long neck flattened Tiny head flattened 2 2
GM-2EP GM-2ES GM-2B
2 Ball nose 4 Tiny ball nose Long neck ball nose 2 2 2 Radius 4
GM-2BL GM-4B GM-2BS GM-2BP GM-2R GM-4R GM-4RL
1.0~12.0 3.0~12.0 6.0~16.0 6.0~20.0 1.0~20.0 6.0~20.0 1.0~20.0 3.0~20.0 6.0~20.0 6.0~20.0 6.0~20.0 0.5~5.0 0.3~3.0
Corrugated edge
GM-4W HM-2E
B200 B255 B201 B256 B202 B257 B203 B257 B204 B258 B205 B259 B206 B260 B207 B261 B209 B263
HM-2EFP HM-4E
Flattened 4
Machining high hardness steel
HM-4EL HM-4EFP HM-6E
HM-6EL
Long neck flattened Tiny head flattened 2 2
HM-2EP HM-2ES
174 B

Milling
N
Copper alloy Aluminum alloy
Workpiece material
Machining operation Machining high hardness steel Machining copper Machining aluminum
Machining materials hard to cut
P
Type Shape Size range
Pre-hardened steel Carbon steel, alloy steel
M K
S H
Heat resistant alloy High hardness steel
Page
Specification Cutting parameters
Number of teeth
2 4 2 2 4 2 4 2 2 2 2 3 2 3 2 3 3 4
Geometry
HM-2B HM-2BL HM-2BFP HM-4B HM-2BS HM-2BP HM-4R

Radius
R0.5~R10.0 R1.0~R10.0 R0.5~R10.0 R1.5~R10.0 R0.15~R1.5 R0.25~R2.5 3.0~12.0 6.0~12.0 6.0~16.0 1.0~12.0 3.0~12.0 0.5~5.0 R0.5~R6.0 R0.25~R2.5 1.0~20.0 3.0~20.0 1.0~20.0 R1.0~R6.0 6.0~20.0 6.0~20.0 6.0~20.0 12.0~20.0 12.0~20.0 3.0~20.0 6.0~12.0
B210 B264 B211 B264 B212 B264 B213 B265 B214 B266 B215 B267 B217 B269 B218 B269 B219 B269
B221 B270 B222 B271 B223 B272 B224 B273 B225 B274 B227 B275 B228 B275 B229 B276 B230 B277 B231 B278 B232 B279 B233 B280 B234 B281 B235 B282 B237 B283 B238 B284
Ball nose
Tiny ball nose Long neck ball nose
Solid carbide end mills
HM-4RF HM-4RP NM-2E NM-4E NM-2EP NM-2B NM-2BP AL-2E
Flattened
Long neck flattened Ball nose Long neck ball nose
Flattened
AL-2EL AL-3E AL-2B AL-3W AL-2R-AIR
Ball nose Corrugated edge
Radius ( extra high speed)
AL-2RL-AIR AL-3R-AIR AL-3RL-AIR
Flattened Radius
SM-3E SM-4R
175 B
Milling

Solid carbide end mills code key
GM HM
General machining Machining hardened material Machining copper Machining aluminum Machining materials hard to cut E B R W Flattened Ball nose Radius Corrugated edge
NM AL SM
End mills category
End mills type
Shrunken neck
Radius or radius of ball nose end mills
Indexable milling tools Solid carbide end mills Solid carbide end mills code key
GM -2
P -D12 R0.5 -M08
Number of teeth
Length category
L S F Defaulted Long series Tiny diameter Short cutting edge Series of standard length
Diameter
M H L D S AIR
Other
Neck length Cutting edge length Whole length Diameter Slim shank(4mm) Extra high speed end mills for machining aluminum in aerospace industry
176 B

Graphics category and identification
Milling
Coated end mills
Machining operation
Flattened end mills for side face machining
Side face
AITiN
TiAIN
Coated
Coated
AlTiN coating TiAlN coating CrN coating

Step shoulder
CrN
Coated
Flattened end mills for shoulder machining
End mill series

2-ute attened end mills 2-ute ball nose end mills
Deep flattened slot Straight slot
Flattened end mills for straight slot machining
Flattened end mills for deep slot machining
2-ute R end mills 3-ute attened end mills

Profile
Ball nose end mills for profile machining
Graphics category and identification
3-ute R end mills Ball nose end mills for cavity machining 4-ute attened end mills 4-ute ball nose end mills
Ball nose slot Cavity
Ball nose end mills for slot machining
4-ute R end mills 6-ute attened end mills

Deep ball nose slot
Ball nose end mills for deep slot machining
Helical angle
35o
R end mills for side machining 35helical angle

Radius shoulder
Cutting diameter tolerance

D
D12 0~-0.020 12<D 0~-0.030
R end mills for slot machining

Radius corner slot
Cutting diameter tolerance
Radius tolerance of ball nose end mills

R
R0.01
R end mills for profile machining

Profile
Radius tolerance
177 B
GM
series general machining end mills

Wide application: high efficiency machining can be achieved from common steel to pre-Hardened steel. Optimized structure: reasonable combination of sharp cutting edge and tool strength makes cutting much light and fast, achieving longer tool-life. Complete in categor y : can realize application from rough machining with high metal removal rate to finish machining with high surface quality. Complete in specification: the minimum specification is 0.3 mm, easily complete machining even though the micro part of workpiece.
Tool typeGM-4E-D10.0 Size10.0mm Workpiece materialNAK8040HRC Rotating speed3200r/min (100m/min) Feed speed640mm/r (0.2mm/r) Axial cutting depthAp=15mm Radial cutting depthAe=1.0mm Cutting style: side milling ( down milling) Cooling system: air blow MachineMIKRON UCP 1000
Cutting edge abrasion and surface quality of workpiece End mills Cutting length
GM-4E-D10.0 60m Similar product of company A 20m Similar product of company B 60m
Cutting edge abrasion
Workpiece surface quality
178 B

GM series for general machining
Milling
Side face Step shoulder Straight slot

d
10
Figure 1
Very suitable for slot milling

35o
Wide application.
Figure 2
TiAIN
D
1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 8 8 10 10 12 12 14 16 18 20
H
3 4 6 8 8 11 3 4 6 8 8 10 11 11 13 16 16 20 20 22 25 26 30 32 45 45 45
L
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 75 75 75 75 75 100 100 100
Number of teeth Z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1
Indexable milling tools Solid carbide end mills
Figure 1 Figure 1 Figure 2 Figure 1
GM series
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Very suitable Suitable

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
179 B
Milling

2-flute flattened end mills with straight shank and long cutting edge
Side face
Step shoulder
Straight slot
Figure 1
10
GM-2E series with long cutting edge.

35
o
Figure 2
TiAIN
D
3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
GM-2EL-D3.0 GM-2EL-D4.0 GM-2EL-D5.0 GM-2EL-D6.0 GM-2EL-D8.0 GM-2EL-D10.0 GM-2EL-D12.0 GM-2EL-D14.0 GM-2EL-D16.0 GM-2EL-D20.0
6 6 6 6 8 10 12 14 16 20
Indexable milling tools Solid carbide end mills GM series
H
12 15 20 20 25 30 35 40 50 55
L
75 75 75 75 100 100 100 100 150 150
Number of teeth Z
2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
180 B
Code key B176

Milling
Step shoulder Straight slot

d
Side face
10 L
Figure 1
For side milling and shallow slot machining.

45o
Wide application.
H L
Figure 2
TiAIN
D
1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 8 8 10 10 12 12 14 16 18 20
H
3 4 6 8 8 11 3 4 6 8 8 10 11 11 13 16 16 20 20 22 25 26 30 32 45 45 45
L
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 75 75 75 75 75 100 100 100
Number of teeth Z
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Geometry
GM series
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Very suitable Suitable

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
181 B
Milling

Side face
Step shoulder
Straight slot
10 L
D
H L
Figure 1
Figure 2

45o
TiAIN
D
3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
GM-4EL-D3.0 GM-4EL-D4.0 GM-4EL-D5.0 GM-4EL-D6.0 GM-4EL-D8.0 GM-4EL-D10.0 GM-4EL-D12.0 GM-4EL-D14.0 GM-4EL-D16.0 GM-4EL-D20.0
6 6 6 6 8 10 12 14 16 20
H
12 15 20 20 25 30 35 40 50 55
L
75 75 75 75 100 100 100 100 150 150
Number of teeth Z
4 4 4 4 4 4 4 4 4 4

Workpiece material
D
Copper alloy Aluminum alloy Titanium alloy
Geometry
182 B
Code key B176

Milling
Side face
Perfect rigidity is particular for side finish machining. High speed, high feed rate.
45o
TiAIN
D
6.0 8.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
GM-6E-D6.0 GM-6E-D8.0 GM-6E-D10.0 GM-6E-D12.0 GM-6E-D16.0 GM-6E-D20.0
6 8 10 12 16 20
H
18 20 30 32 40 45
L
60 60 75 75 100 100
Number of teeth Z
6 6 6 6 6 6
10.0 12.0 16.0 20.0
GM series

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
183 B
Milling

Side face
Step shoulder
Straight slot

45o
TiAIN
D
6.0 8.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
GM-6EL-D6.0 GM-6EL-D8.0 GM-6EL-D10.0 GM-6EL-D12.0 GM-6EL-D16.0 GM-6EL-D20.0
6 8 10 12 16 20
H
24 32 40 45 64 75
L
75 75 100 100 150 150
Number of teeth Z
6 6 6 6 6 6
10.0 12.0 16.0 20.0

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
184 B
Code key B176

Milling
Deep flattened slot
2-flute straight shank end mills with short cutting edge and long neck
d1
10
Applicable for narrow slot machining.

D<1mm 1mmD
35
TiAIN
D 0.5 0.5 0.5 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 2.0 2.0
Coated
0~-0.015
Ordering number
GM-2EP-D0.5-M04 GM-2EP-D0.5-M06 GM-2EP-D0.5-M08 GM-2EP-D0.8-M04 GM-2EP-D0.8-M06 GM-2EP-D0.8-M08 GM-2EP-D0.8-M10 GM-2EP-D1.0-M04 GM-2EP-D1.0-M06 GM-2EP-D1.0-M08 GM-2EP-D1.0-M10 GM-2EP-D1.0-M12 GM-2EP-D1.0-M14 GM-2EP-D1.2-M06 GM-2EP-D1.2-M08 GM-2EP-D1.2-M10 GM-2EP-D1.2-M12 GM-2EP-D1.5-M06 GM-2EP-D1.5-M08 GM-2EP-D1.5-M10 GM-2EP-D1.5-M12 GM-2EP-D1.5-M14 GM-2EP-D2.0-M06 GM-2EP-D2.0-M08
Basic dimension(mm)
d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 H 0.7 0.7 0.7 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 2.3 2.3 2.3 2.3 2.3 3.0 3.0 M 4.0 6.0 8.0 4.0 6.0 8.0 10.0 4.0 6.0 8.0 10.0 12.0 14.0 6.0 8.0 10.0 12.0 6.0 8.0 10.0 12.0 14.0 6.0 8.0 d1 0.45 0.45 0.45 0.75 0.75 0.75 0.75 0.95 0.95 0.95 0.95 0.95 0.95 1.15 1.15 1.15 1.15 1.45 1.45 1.45 1.45 1.45 1.95 1.95 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Number of teeth
Z 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
GM series

Workpiece material
Carbon steel Alloy steel Pre-hardened steelHardened steel ~40HRC ~50HRC
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
Cutting parameters B243-B244
185 B
Milling

2-flute straight shank end mills with short cutting edge and long neck
Deep flattened slot
d1
10 L

D<1mm 1mmD
35
TiAIN
D 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0
Coated
0~-0.015
Ordering number
GM-2EP-D2.0-M10 GM-2EP-D2.0-M12 GM-2EP-D2.0-M14 GM-2EP-D2.0-M16 GM-2EP-D2.5-M08 GM-2EP-D2.5-M10 GM-2EP-D2.5-M12 GM-2EP-D2.5-M14 GM-2EP-D2.5-M16 GM-2EP-D2.5-M18 GM-2EP-D2.5-M20 GM-2EP-D3.0-M06 GM-2EP-D3.0-M08 GM-2EP-D3.0-M10 GM-2EP-D3.0-M12 GM-2EP-D3.0-M14 GM-2EP-D3.0-M16 GM-2EP-D3.0-M18 GM-2EP-D3.0-M20 GM-2EP-D4.0-M12 GM-2EP-D4.0-M16 GM-2EP-D4.0-M20 GM-2EP-D4.0-M25 GM-2EP-D5.0-M16 GM-2EP-D5.0-M25
Basic dimension(mm)
d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 H 3.0 3.0 3.0 3.0 3.7 3.7 3.7 3.7 3.7 3.7 3.7 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6.0 6.0 6.0 6.0 7.5 7.5 M 10.0 12.0 14.0 16.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 12.0 16.0 20.0 25.0 16.0 25.0 d1 1.95 1.95 1.95 1.95 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.85 2.85 2.85 2.85 2.85 2.85 2.85 2.85 3.85 3.85 3.85 3.85 4.85 4.85 L 50 50 50 50 50 50 50 50 60 60 60 50 50 50 50 60 60 60 60 50 60 60 60 60 70
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
186 B
Code key B176

Milling
2-flute flattened end mills with straight shank and tiny diameter
Side face
10
Tiny diameter end mills can fully display high speed and high precision functions of machining center, often used for machining precision components such as electronic part etc.
D<1mm 1mmD
35
TiAIN
D 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0
Coated
0~-0.015
Ordering number
GM-2ES-D0.3 GM-2ES-D0.4 GM-2ES-D0.5 GM-2ES-D0.6 GM-2ES-D0.7 GM-2ES-D0.8 GM-2ES-D0.9 GM-2ES-D1.0 GM-2ES-D1.1 GM-2ES-D1.2 GM-2ES-D1.3 GM-2ES-D1.4 GM-2ES-D1.5 GM-2ES-D1.6 GM-2ES-D1.7 GM-2ES-D1.8 GM-2ES-D1.9 GM-2ES-D2.0 GM-2ES-D2.1 GM-2ES-D2.2 GM-2ES-D2.3 GM-2ES-D2.4 GM-2ES-D2.5 GM-2ES-D2.6 GM-2ES-D2.7 GM-2ES-D2.8 GM-2ES-D2.9 GM-2ES-D3.0
Basic dimension(mm)
d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 H 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.0 4.0 4.5 4.5 5.0 5.0 5.0 5.5 5.5 6.0 6.0 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Very suitable Suitable

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
187 B
Milling

2-flute ball nose end mills with straight shank
Profile
Cavity
Ball nose slot
Figure 1
Suitable for profile milling, for machining at high speed. Wide applications.
Figure 2
35o
TiAIN
D
1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 5.5 6.0 7.0 8.0 9.0 10 12 14 16 20
Coated
D12 0~-0.020 12<D 0~-0.030
R0.01
Ordering number
GM-2B-R0.5S GM-2B-R0.75S GM-2B-R1.0S GM-2B-R1.25S GM-2B-R1.5S GM-2B-R2.0S GM-2B-R0.5 GM-2B-R0.75 GM-2B-R1.0 GM-2B-R1.25 GM-2B-R1.5 GM-2B-R1.75 GM-2B-R2.0 GM-2B-R2.5 GM-2B-R2.75 GM-2B-R3.0 GM-2B-R3.5 GM-2B-R4.0 GM-2B-R4.5 GM-2B-R5.0 GM-2B-R6.0 GM-2B-R7.0 GM-2B-R8.0 GM-2B-R10.0
Basic dimension(mm) R
0.5 0.75 1.0 1.25 1.5 2.0 0.5 0.75 1.0 1.25 1.5 1.75 2.0 2.5 2.75 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 10.0
d
4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0 14.0 16.0 20.0
H
2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 8.0 10.0 12.0 12.0 14.0 16.0 18.0 20.0 24.0 28.0 32.0 40.0
L
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 75 75 75 75 100 100
Number of teeth Z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
188 B
Code key B176

Milling
Profile Cavity Ball nose slot
2-flute ball nose end mills with long straight shank
Figure 1
Figure 2
GM-2B series with long shank.

35o
TiAIN
D
2.0 2.5 3.0 3.5 4.0 5.0 5.5 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
R0.01
Ordering number
GM-2BL-R1.0 GM-2BL-R1.25 GM-2BL-R1.5 GM-2BL-R1.75 GM-2BL-R2.0 GM-2BL-R2.5 GM-2BL-R2.75 GM-2BL-R3.0 GM-2BL-R3.5 GM-2BL-R4.0 GM-2BL-R4.5 GM-2BL-R5.0 GM-2BL-R6.0 GM-2BL-R7.0 GM-2BL-R8.0 GM-2BL-R10.0
1.0 1.25 1.5 1.75 2.0 2.5 2.75 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 10.0
d
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0 14.0 16.0 20.0
H
4.0 5.0 6.0 8.0 8.0 10.0 12.0 12.0 14.0 16.0 18.0 20.0 24.0 28.0 32.0 40.0
L
75 75 75 75 75 75 75 75 75 100 100 100 100 100 150 150
Number of teeth Z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2
Solid carbide end mills GM series

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
189 B
Milling


d
Profile
Cavity
Ball nose slot
R Figure 1 D 10 L H R D H L Figure 2
4-ute ball nose end mills can achieve high cutting efficiency at high feed speed.
35o
TiAIN
D
3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
R0.01
Ordering number
GM-4B-R1.5 GM-4B-R2.0 GM-4B-R2.5 GM-4B-R3.0 GM-4B-R4.0 GM-4B-R5.0 GM-4B-R6.0 GM-4B-R7.0 GM-4B-R8.0 GM-4B-R9.0 GM-4B-R10.0
1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
d
6.0 6.0 6.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
H
6.0 8.0 10.0 12.0 16.0 20.0 24.0 28.0 32.0 36.0 40.0
L
50 50 50 50 60 75 75 75 100 100 100
Number of teeth Z
4 4 4 4 4 4 4 4 4 4 4
Geometry
Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
190 B
Code key B176

Milling
2-flute tiny ball nose end mills with straight shank
R 10 H L D d
35o
TiAIN
D
0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.40 1.50 1.60 1.80 2.00 2.50 3.00
Coated
0~-0.015
R0.005 R<0.5 R0.01 R0.5
Ordering number
GM-2BS-R0.15 GM-2BS-R0.20 GM-2BS-R0.25 GM-2BS-R0.30 GM-2BS-R0.35 GM-2BS-R0.40 GM-2BS-R0.45 GM-2BS-R0.50 GM-2BS-R0.60 GM-2BS-R0.70 GM-2BS-R0.75 GM-2BS-R0.80 GM-2BS-R0.90 GM-2BS-R1.00 GM-2BS-R1.25 GM-2BS-R1.50
0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.60 0.70 0.75 0.80 0.90 1.00 1.25 1.50
d
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
H
0.5 0.6 0.8 0.9 1.0 1.2 1.3 1.5 1.8 2.0 2.3 2.5 2.7 3.0 3.7 4.5
L
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Number of teeth Z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
191 B
Milling

2-flute straight shank ball nose end mills with short cutting edge and long neck
Deep ball nose slot
R 10
d1
Applicable for machining narrow slot and free-form surface.

35o
TiAIN
D 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5
Coated
0~-0.015
R0.005 R<0.5 R0.01 R0.5
D M 4.0 6.0 4.0 6.0 8.0 4.0 6.0 8.0 d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60
Ordering number
GM-2BP-R0.25-M04 GM-2BP-R0.25-M06 GM-2BP-R0.3-M04 GM-2BP-R0.3-M06 GM-2BP-R0.3-M08 GM-2BP-R0.4-M04 GM-2BP-R0.4-M06 GM-2BP-R0.4-M08 GM-2BP-R0.4-M10 GM-2BP-R0.5-M04 GM-2BP-R0.5-M06 GM-2BP-R0.5-M08 GM-2BP-R0.5-M10 GM-2BP-R0.5-M12 GM-2BP-R0.6-M06 GM-2BP-R0.6-M08 GM-2BP-R0.6-M12 GM-2BP-R0.6-M16 GM-2BP-R0.75-M08 GM-2BP-R0.75-M12 GM-2BP-R0.75-M16 GM-2BP-R1.0-M06 GM-2BP-R1.0-M08 GM-2BP-R1.0-M10 GM-2BP-R1.0-M12 GM-2BP-R1.0-M16 GM-2BP-R1.0-M20 GM-2BP-R1.25-M08 GM-2BP-R1.25-M12 GM-2BP-R1.25-M16 GM-2BP-R1.25-M20
Basic dimension(mm)
R 0.25 0.25 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0 1.0 1.25 1.25 1.25 1.25 H 0.7 0.7 0.9 0.9 0.9 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 2.3 2.3 2.3 3.0 3.0 3.0 3.0 3.0 3.0 3.7 3.7 3.7 3.7 d1 0.45 0.45 0.55 0.55 0.55 0.75 0.75 0.75 0.75 0.95 0.95 0.95 0.95 0.95 1.15 1.15 1.15 1.15 1.45 1.45 1.45 1.95 1.95 1.95 1.95 1.95 1.95 2.4 2.4 2.4 2.4
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
10.0 4.0 6.0 8.0 10.0 12.0 6.0 8.0 12.0 16.0 8.0 12.0 16.0 6.0 8.0 10.0 12.0 16.0 20.0 8.0 12.0 16.0 20.0
192 B
Code key B176

Milling
Deep ball nose slot
2-flute straight shank ball nose end mills with short cutting edge and long neck
R 10
d1

35o
TiAIN
D 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0
Coated
0~-0.015
R0.005 R<0.5 R0.01 R0.5
Ordering number
GM-2BP-R1.5-M08 GM-2BP-R1.5-M10 GM-2BP-R1.5-M12 GM-2BP-R1.5-M16 GM-2BP-R1.5-M20 GM-2BP-R2.0-M10 GM-2BP-R2.0-M16 GM-2BP-R2.0-M20 GM-2BP-R2.0-M25 GM-2BP-R2.5-M16 GM-2BP-R2.5-M25
Basic dimension(mm)
R 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5 H 4.5 4.5 4.5 4.5 4.5 6.0 6.0 6.0 6.0 7.5 7.5 d1 2.85 2.85 2.85 2.85 2.85 3.85 3.85 3.85 3.85 4.85 4.85 M 8.0 10.0 12.0 16.0 20.0 10.0 16.0 20.0 25.0 16.0 25.0 d 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 L 50 50 50 60 60 60 60 60 60 60 70
Number of teeth
Z 2 2 2 2 2 2 2
2 2 2 2

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
193 B
Milling

2-flute R end mills with straight shank
Radius shoulder
Profile
Radius corner slot
Figure 1
Wide applications, applicable for several machining styles.

35o
Figure 2
TiAIN
D
1.0 1.5 2.0 2.0 2.5 2.5 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 6.0 6.0 6.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0
Coated
0~-0.020
Ordering number
GM-2R-D1.0R0.2 GM-2R-D1.5R0.2 GM-2R-D2.0R0.2 GM-2R-D2.0R0.5 GM-2R-D2.5R0.2 GM-2R-D2.5R0.5 GM-2R-D3.0R0.2 GM-2R-D3.0R0.3 GM-2R-D3.0R0.5 GM-2R-D4.0R0.2 GM-2R-D4.0R0.3 GM-2R-D4.0R0.5 GM-2R-D4.0R1.0 GM-2R-D5.0R0.3 GM-2R-D5.0R0.5 GM-2R-D5.0R1.0 GM-2R-D6.0R0.3 GM-2R-D6.0R0.5 GM-2R-D6.0R1.0 GM-2R-D8.0R0.3 GM-2R-D8.0R0.5 GM-2R-D8.0R1.0 GM-2R-D10.0R0.5 GM-2R-D10.0R1.0 GM-2R-D10.0R1.5 GM-2R-D10.0R2.0 GM-2R-D12.0R0.5 GM-2R-D12.0R1.0 GM-2R-D12.0R1.5 GM-2R-D12.0R2.0
0.2 0.2 0.2 0.5 0.2 0.5 0.2 0.3 0.5 0.2 0.3 0.5 1.0 0.3 0.5 1.0 0.3 0.5 1.0 0.3 0.5 1.0 0.5 1.0 1.5 2.0 0.5 1.0 1.5 2.0
d
4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 8 8 8 10 10 10 10 12 12 12 12
H
3 4 6 6 8 8 8 8 8 11 11 11 11 13 13 13 16 16 16 20 20 20 25 25 25 25 30 30 30 30
L
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 75 75 75 75 75 75 75 75
Number of teeth Z
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
194 B
Code key B176

Milling
Radius corner slot
Radius shoulder
Profile
Figure 1

35o
Figure 2
TiAIN
D
3.0 4.0 4.0 5.0 5.0 6.0 6.0 8.0 8.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0
Coated
0~-0.020
Ordering number
GM-4R-D3.0R0.2 GM-4R-D4.0R0.3 GM-4R-D4.0R0.5 GM-4R-D5.0R0.5 GM-4R-D5.0R1.0 GM-4R-D6.0R0.5 GM-4R-D6.0R1.0 GM-4R-D8.0R0.5 GM-4R-D8.0R1.0 GM-4R-D10.0R0.5 GM-4R-D10.0R1.0 GM-4R-D10.0R2.0 GM-4R-D10.0R3.0 GM-4R-D12.0R0.5 GM-4R-D12.0R1.0 GM-4R-D12.0R2.0 GM-4R-D12.0R3.0
0.2 0.3 0.5 0.5 1.0 0.5 1.0 0.5 1.0 0.5 1.0 2.0 3.0 0.5 1.0 2.0 3.0
d
4 4 4 6 6 6 6 8 8 10 10 10 10 12 12 12 12
H
8 10 10 13 13 16 16 20 20 25 25 25 25 30 30 30 30
L
50 50 50 50 50 50 50 60 60 75 75 75 75 75 75 75 75
Number of teeth Z
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Geometry
Figure 1 Figure 2 Figure 2 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
195 B
Milling

Radius shoulder
Profile
Radius corner slot
R D L H
GM-4R series with long shank.

35o
TiAIN
D
6.0 6.0 8.0 8.0 10.0 10.0 10.0 12.0 12.0 12.0 16.0 16.0
Coated
0~-0.020
Ordering number
GM-4RL-D6.0R0.5 GM-4RL-D6.0R1.0 GM-4RL-D8.0R0.5 GM-4RL-D8.0R1.0 GM-4RL-D10.0R0.5 GM-4RL-D10.0R1.0 GM-4RL-D10.0R2.0 GM-4RL-D12.0R0.5 GM-4RL-D12.0R1.0 GM-4RL-D12.0R2.0 GM-4RL-D16.0R1.0 GM-4RL-D16.0R2.0
0.5 1.0 0.5 1.0 0.5 1.0 2.0 0.5 1.0 2.0 1.0 2.0
d
6 6 8 8 10 10 10 12 12 12 16 16
H
16 16 20 20 25 25 25 30 30 30 45 45
L
75 75 100 100 100 100 100 100 100 100 150 150
Number of teeth Z
4 4 4 4 4 4 4 4 4 4 4 4

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
196 B
Code key B176

Milling
4-flute flattened end mills with straight shank and corrugated edges (roughing)
Side face
Figure 1
10
Figure 2
Most suitable for effectively rough machining.

30o
TiAIN
Coated
D6 0~-0.048 6D10 0~-0.058 10D18 0~-0.07 18<D 0~-0.084
Ordering number
GM-4W-D6.0 GM-4W-D7.0 GM-4W-D8.0 GM-4W-D9.0 GM-4W-D10.0 GM-4W-D11.0 GM-4W-D12.0 GM-4W-D16.0 GM-4W-D20.0
Basic dimension(mm) D
6 7 8 9 10 11 12 16 20
d
6 8 8 10 10 12 12 16 20
H
16 20 20 22 25 26 30 45 45
L
50 60 60 75 75 75 75 100 100
Number of teeth Z
4 4 4 4 4 4 4 4 4
Geometry
Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
197 B
series end mills for machining high hardness steel

1 Big enough chip pocket and thick core designed,
HM
take rigidity and chip removal both into consideration.
2 Strict and reasonable ute control makes cutting

and chip removal more stable
3 Appropriate rake angle design takes edge

strength and sharpness both into consideration, tool application becomes wider.
Indexable milling tools Solid carbide end mills HM series
4 Outstanding performances come from super

ultra-fine grain carbide substrate, tool wear resistance and cutting edge strength combine perfectly.
5 Optimized AlTiN coating is particular for high

hardness materials and high speed machining, possessing more prominent high-temp. hardness ( red hardness) and high-temp stability.
AITiN coating
Normal temprature
Ultra-fine carbide substrate
198 B
HM series end mills for machining high hardness steel

Tool type
Size6mm Workpiece materialSKD11(62HRC) Rotating speed10000r/min(188m/min) Feed speed2000mm/r(0.2mm/r) Axial cutting depthAp=9mm Radial cutting depthAe=0.1mm Cutting style: cycloid machining Cooling system: air blow MachineMIKRON UCP 1000
HM-4E-D6.0
Abrasion in machining process

10 mm
9mm
HM-4E-D6.0
Cycloid machining of attened end mill

0.2
Flank abrasion of periphery edge(mm)
0.18 0.16 0.14 0.12 0.1 0.08 0.06 0.04 0.02 0

0 20 40 60
Breakage HM-4E-D6.0 Excessive abrasion, invalid Similar product of company A Similar product of company B
Cutting length60m
Cutting length100m
Similar product of company B
Solid carbide end mills HM series
Cutting length60m
80 100
Cutting length60m
Cutting length(m)
Tool type
HM-2B-R3.0
Size: R3.0mm Workpiece material: SKD61(52HRC) Rotating speed: 6400r/min (120m/min) Feed speed: 1280mm/r (0.2mm/r) Axial cutting depth: Ap=0.12mm Radial cutting depth: Ae=0.24mm Cutting style: machining cavity with 2o taper angle Cooling system: air blow MachineMIKRON UCP 1000
Abrasion of mill after machining 5 cavities
Cavity machining of ball nose end mills

0.14 0.12
Flank wear(mm) Excessive abrasion, invalid
HM-2B-R3.0
0.1 0.08 0.06 0.04 0.02 0 0 1 2 3 4 5
Small abrasion, continue operating
HM-2B-R3.0 Similar product of company A
Number of cavity (pc)
199 B
Milling
HM series for machining high hardness steel

d
Side face
Step shoulder
Straight slot
10
Figure 1
For slot milling. Most suitable for high speed cutting and dry cutting.
35
o
Figure 2
AITiN
D 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-2E-D1.0S HM-2E-D1.5S HM-2E-D2.0S HM-2E-D2.5S HM-2E-D3.0S HM-2E-D4.0S HM-2E-D1.0 HM-2E-D1.5 HM-2E-D2.0 HM-2E-D2.5 HM-2E-D3.0 HM-2E-D3.5 HM-2E-D4.0 HM-2E-D4.5 HM-2E-D5.0 HM-2E-D5.5 HM-2E-D6.0 HM-2E-D7.0 HM-2E-D8.0 HM-2E-D9.0 HM-2E-D10.0 HM-2E-D11.0 HM-2E-D12.0 HM-2E-D14.0 HM-2E-D16.0 HM-2E-D18.0 HM-2E-D20.0
Basic dimension(mm)
d 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 8 8 10 10 12 12 14 16 18 20 H 3 4 6 8 8 11 3 4 6 8 8 10 11 11 13 16 16 20 20 22 25 26 30 32 45 45 45 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 75 75 75 75 100 100 100 100
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
200 B
Code key B176
Milling
2-flute short cutting edge flattened end mills with long straight shank
Short cutting edge and high rigidity designed, applicable for heavy cutting and deep cavity milling.
35o
AITiN
D 6.0 8.0 10.0 12.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-2EFP-D6.0 HM-2EFP-D8.0 HM-2EFP-D10.0 HM-2EFP-D12.0 HM-2EFP-D16.0 HM-2EFP-D20.0
Basic dimension(mm)
d 6.0 8.0 10.0 12.0 16.0 20.0 H 9 12 15 18 24 30 M 30 40 50 50 50 60 d1 5.8 7.8 9.6 11.5 15.5 19.5 L 75 100 100 100 150 150
Number of teeth
Z 2 2 2 2 2 2

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
High temperature alloy
Code key B176
201 B
Milling

d
Side face
Step shoulder
Straight slot
10 L

For side milling and shallow slot milling Most suitable for high speed cutting and dry cutting.
45
o
Figure 1
Figure 2
H L
AITiN
D 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 16.0 18.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-4E-D1.0S HM-4E-D1.5S HM-4E-D2.0S HM-4E-D2.5S HM-4E-D3.0S HM-4E-D4.0S HM-4E-D1.0 HM-4E-D1.5 HM-4E-D2.0 HM-4E-D2.5 HM-4E-D3.0 HM-4E-D3.5 HM-4E-D4.0 HM-4E-D4.5 HM-4E-D5.0 HM-4E-D5.5 HM-4E-D6.0 HM-4E-D7.0 HM-4E-D8.0 HM-4E-D9.0 HM-4E-D10.0 HM-4E-D11.0 HM-4E-D12.0 HM-4E-D14.0 HM-4E-D16.0 HM-4E-D18.0 HM-4E-D20.0
Basic dimension(mm)
d 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 8 8 10 10 12 12 14 16 18 20 H 3 4 6 8 8 11 3 4 6 8 8 10 11 11 13 16 16 20 20 22 25 26 30 32 45 45 45 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 75 75 75 75 75 100 100 100
Number of teeth
Z 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Geometry

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
202 B
Code key B176
Milling
4-flute long cutting edge flattened end mills with straight shank
10 L
D D
Figure 1
Figure 2
HM-4E series with long cutting edge.

45o
H L
AITiN
D 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-4EL-D3.0 HM-4EL-D4.0 HM-4EL-D5.0 HM-4EL-D6.0 HM-4EL-D8.0 HM-4EL-D10.0 HM-4EL-D12.0 HM-4EL-D14.0 HM-4EL-D16.0 HM-4EL-D20.0
Basic dimension(mm)
d 6 6 6 6 8 10 12 14 16 20 H 12 15 20 20 25 30 35 40 50 55 L 75 75 75 75 100 100 100 100 150 150
Number of teeth
Z 4 4 4 4 4 4 4 4 4 4
Geometry
Figure 1 Figure 1
HM series

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
203 B
Milling
4-flute short cutting edge flattened end mills with long straight shank
Side face
Step shoulder
Straight slot
Short cutting edge and high rigidity designed, applicable for heavy cutting and deep cavity milling.
45o
AITiN
D 6.0 8.0 10.0 12.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-4EFP-D6.0 HM-4EFP-D8.0 HM-4EFP-D10.0 HM-4EFP-D12.0 HM-4EFP-D16.0 HM-4EFP-D20.0
Basic dimension(mm)
d 6.0 8.0 10.0 12.0 16.0 20.0 H 9 12 15 18 24 30 M 30 40 50 50 50 60 d1 5.8 7.8 9.6 11.5 15.5 19.5 L 75 100 100 100 150 150
Number of teeth
Z 4 4 4 4 4 4

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
High temperature alloy
204 B
Code key B176
Milling
Side face
Perfect tool rigidity can most reduce relieving amount in side milling. Most suitable for high speed cutting and dry cutting.
45o
AITiN
D 6.0 8.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-6E-D6.0 HM-6E-D8.0 HM-6E-D10.0 HM-6E-D12.0 HM-6E-D16.0 HM-6E-D20.0
Basic dimension(mm)
d 6 8 10 12 16 20 H 18 20 30 32 40 45 L 60 60 75 75 100 100
Number of teeth
Z 6 6 6 6 6 6
10.0 12.0 16.0 20.0
HM series

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
205 B
Milling
Side face
Step shoulder
Straight slot
HM-6E series with long cutting edge.

45o
AITiN
D 6.0 8.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-6EL-D6.0 HM-6EL-D8.0 HM-6EL-D10.0 HM-6EL-D12.0 HM-6EL-D16.0 HM-6EL-D20.0
Basic dimension(mm)
d 6 8 10 12 16 20 H 24 32 40 45 64 75 L 75 75 100 100 150 150
Number of teeth
Z 6 6 6 6 6 6
10.0 12.0 16.0 20.0

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
206 B
Code key B176
Milling
Deep flattened slot
2-flute short cutting edge flattened end mills with straight shank and long neck
d1
10

D<1mm 1mmD
35
AITiN
D 0.5 0.5 0.5 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0
Coated
0~-0.015
Ordering number
HM-2EP-D0.5-M04 HM-2EP-D0.5-M06 HM-2EP-D0.5-M08 HM-2EP-D0.8-M04 HM-2EP-D0.8-M06 HM-2EP-D0.8-M08 HM-2EP-D0.8-M10 HM-2EP-D1.0-M04 HM-2EP-D1.0-M06 HM-2EP-D1.0-M08 HM-2EP-D1.0-M10 HM-2EP-D1.0-M12 HM-2EP-D1.0-M14 HM-2EP-D1.2-M06 HM-2EP-D1.2-M08 HM-2EP-D1.2-M10 HM-2EP-D1.2-M12 HM-2EP-D1.5-M06 HM-2EP-D1.5-M08 HM-2EP-D1.5-M10 HM-2EP-D1.5-M12 HM-2EP-D1.5-M14 HM-2EP-D2.0-M06 HM-2EP-D2.0-M08 HM-2EP-D2.0-M10 HM-2EP-D2.0-M12 HM-2EP-D2.0-M14 HM-2EP-D2.0-M16
Basic dimension(mm)
d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 H 0.7 0.7 0.7 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 2.3 2.3 2.3 2.3 2.3 3.0 3.0 3.0 3.0 3.0 3.0 M 4.0 6.0 8.0 4.0 6.0 8.0 10.0 4.0 6.0 8.0 10.0 12.0 14.0 6.0 8.0 10.0 12.0 6.0 8.0 10.0 12.0 14.0 6.0 8.0 10.0 12.0 14.0 16.0 d1 0.45 0.45 0.45 0.75 0.75 0.75 0.75 0.95 0.95 0.95 0.95 0.95 0.95 1.15 1.15 1.15 1.15 1.45 1.45 1.45 1.45 1.45 1.95 1.95 1.95 1.95 1.95 1.95 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Carbon steel Alloy steel Pre-hardened steelHardened steel ~40HRC ~50HRC ~60HRC ~68HRC Stainless steel Cast iron, Nodular cast iron
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
207 B
Milling
Deep flattened slot
d1
10

D<1mm 1mmD
35
AITiN
D 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0
Coated
0~-0.015
Ordering number
HM-2EP-D2.5-M08 HM-2EP-D2.5-M10 HM-2EP-D2.5-M12 HM-2EP-D2.5-M14 HM-2EP-D2.5-M16 HM-2EP-D2.5-M18 HM-2EP-D2.5-M20 HM-2EP-D3.0-M06 HM-2EP-D3.0-M08 HM-2EP-D3.0-M10 HM-2EP-D3.0-M12 HM-2EP-D3.0-M14 HM-2EP-D3.0-M16 HM-2EP-D3.0-M18 HM-2EP-D3.0-M20 HM-2EP-D4.0-M12 HM-2EP-D4.0-M16 HM-2EP-D4.0-M20 HM-2EP-D4.0-M25 HM-2EP-D5.0-M16 HM-2EP-D5.0-M25
Basic dimension(mm)
d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 H 3.7 3.7 3.7 3.7 3.7 3.7 3.7 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6.0 6.0 6.0 6.0 7.5 7.5 M 8.0 10.0 12.0 14.0 16.0 18.0 20.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 12.0 16.0 20.0 25.0 16.0 25.0 d1 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.85 2.85 2.85 2.85 2.85 2.85 2.85 2.85 3.85 3.85 3.85 3.85 4.85 4.85 L 50 50 50 50 60 60 60 50 50 50 50 60 60 60 60 60 60 60 60 60 70
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
208 B
Code key B176
Milling
2-flute tiny diameter flattened end mills with straight shank
Side face
D<1mm 1mmD
10
35o
AITiN
D 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0
Coated
0~-0.015
Ordering number
HM-2ES-D0.3 HM-2ES-D0.4 HM-2ES-D0.5 HM-2ES-D0.6 HM-2ES-D0.7 HM-2ES-D0.8 HM-2ES-D0.9 HM-2ES-D1.0 HM-2ES-D1.1 HM-2ES-D1.2 HM-2ES-D1.3 HM-2ES-D1.4 HM-2ES-D1.5 HM-2ES-D1.6 HM-2ES-D1.7 HM-2ES-D1.8 HM-2ES-D1.9 HM-2ES-D2.0 HM-2ES-D2.1 HM-2ES-D2.2 HM-2ES-D2.3 HM-2ES-D2.4 HM-2ES-D2.5 HM-2ES-D2.6 HM-2ES-D2.7 HM-2ES-D2.8 HM-2ES-D2.9 HM-2ES-D3.0
Basic dimension(mm)
d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 H 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0 4.0 4.0 4.0 4.5 4.5 5.0 5.0 5.0 5.5 5.5 6.0 6.0 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
209 B
Milling
Profile
Cavity
Ball nose slot
Figure 1
Figure 2
For profile milling. Most suitable for high speed cutting and dry cutting.
35o
AITiN
D 1.0 1.5 2.0 2.5 3.0 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 5.5 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
R0.01
Ordering number
HM-2B-R0.5S HM-2B-R0.75S HM-2B-R1.0S HM-2B-R1.25S HM-2B-R1.5S HM-2B-R2.0S HM-2B-R0.5 HM-2B-R0.75 HM-2B-R1.0 HM-2B-R1.25 HM-2B-R1.5 HM-2B-R1.75 HM-2B-R2.0 HM-2B-R2.5 HM-2B-R2.75 HM-2B-R3.0 HM-2B-R3.5 HM-2B-R4.0 HM-2B-R4.5 HM-2B-R5.0 HM-2B-R6.0 HM-2B-R7.0 HM-2B-R8.0 HM-2B-R10.0
Basic dimension(mm)
R 0.5 0.75 1.0 1.25 1.5 2.0 0.5 0.75 1.0 1.25 1.5 1.75 2.0 2.5 2.75 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 10.0 d 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0 14.0 16.0 20.0 H 2.0 3.0 4.0 5.0 6.0 8.0 2.0 3.0 4.0 5.0 6.0 8.0 8.0 10.0 12.0 12.0 14.0 16.0 18.0 20.0 24.0 28.0 32.0 40.0 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 75 75 75 75 100 100
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
210 B
Code key B176
Milling
2-flute ball nose end mills with long straight shank
Figure 1
Figure 2
HM-2B series with long shank.

35o
AITiN
D 2.0 2.5 3.0 3.5 4.0 5.0 5.5 6.0 7.0 8.0 9.0 10.0 12.0 14.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
R0.01
Ordering number
HM-2BL-R1.0 HM-2BL-R1.25 HM-2BL-R1.5 HM-2BL-R1.75 HM-2BL-R2.0 HM-2BL-R2.5 HM-2BL-R2.75 HM-2BL-R3.0 HM-2BL-R3.5 HM-2BL-R4.0 HM-2BL-R4.5 HM-2BL-R5.0 HM-2BL-R6.0 HM-2BL-R7.0 HM-2BL-R8.0 HM-2BL-R10.0
Basic dimension(mm)
R 1.0 1.25 1.5 1.75 2.0 2.5 2.75 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 10.0 d 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0 14.0 16.0 20.0 H 4.0 6.0 6.0 8.0 8.0 10.0 12.0 12.0 14.0 16.0 18.0 20.0 24.0 28.0 32.0 40.0 L 75 75 75 75 75 75 75 75 75 100 100 100 100 100 150 150
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 1 Figure 2 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2
HM series

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
211 B
Milling
2-flute short cutting edge ball nose end mills with long straight shank
Profile
Cavity
Ball nose slot
Figure 1
Figure 2
Short cutting edge and high rigidity designed, applicable for heavy cutting.
35o
AITiN
D 1.0 1.5 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
R0.01
Ordering number
HM-2BFP-R0.5 HM-2BFP-R0.75 HM-2BFP-R1.0 HM-2BFP-R1.5 HM-2BFP-R2.0 HM-2BFP-R2.5 HM-2BFP-R3.0 HM-2BFP-R4.0 HM-2BFP-R5.0 HM-2BFP-R6.0 HM-2BFP-R8.0 HM-2BFP-R10.0
Basic dimension(mm)
R 0.5 0.75 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 H 1.0 1.5 2.0 3.0 4.0 5.0 6.0 8.0 10 12 16 20 d1 0.95 1.45 1.95 2.85 3.85 4.85 5.8 7.8 9.6 11.5 15.5 19.5 M 2.5 3.0 4.0 6.0 8.0 10.0 12.0 16.0 20.0 24.0 32.0 40.0 d 6 6 6 6 6 6 6 8 10 12 16 20 L 75 75 75 75 75 75 75 100 100 100 150 150
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
212 B
Code key B176
Milling
Cavity Ball nose slot
Profile
R D 10 L H R Figure 2 D d Figure 1
4-flute ball nose end mill can carry out higher feed speed and improve machining efficienty, extend too life in machining high hardness workpiece.
35o
H L
AITiN
D 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0
Coated
D12 0~-0.020 12<D 0~-0.030
R0.01
Ordering number
HM-4B-R1.5 HM-4B-R2.0 HM-4B-R2.5 HM-4B-R3.0 HM-4B-R4.0 HM-4B-R5.0 HM-4B-R6.0 HM-4B-R7.0 HM-4B-R8.0 HM-4B-R9.0 HM-4B-R10.0
Basic dimension(mm)
R 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 d 6.0 6.0 6.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 H 6.0 8.0 10.0 12.0 16.0 20.0 24.0 28.0 32.0 36.0 40.0 L 50 50 50 50 60 75 75 75 100 100 100
Number of teeth
Z 4 4 4 4 4 4 4 4 4 4 4
Geometry
Figure 1
HM series

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
213 B
Milling
2-flute tiny diameter ball nose end mills with straight shank
Profile
Cavity
Ball nose slot
R 10
H L
35o
AITiN
D 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.40 1.50 1.60 1.80 2.00 2.50 3.00
Coated
0~-0.015
R0.005 R<0.5 R0.01 R0.5
Ordering number
HM-2BS-R0.15 HM-2BS-R0.20 HM-2BS-R0.25 HM-2BS-R0.30 HM-2BS-R0.35 HM-2BS-R0.40 HM-2BS-R0.45 HM-2BS-R0.50 HM-2BS-R0.60 HM-2BS-R0.70 HM-2BS-R0.75 HM-2BS-R0.80 HM-2BS-R0.90 HM-2BS-R1.00 HM-2BS-R1.25 HM-2BS-R1.50
Basic dimension(mm)
R 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.60 0.70 0.75 0.80 0.90 1.00 1.25 1.50 d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 H 0.5 0.6 0.8 0.9 1.0 1.2 1.3 1.5 1.8 2.0 2.3 2.5 2.7 3.0 3.7 4.5 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
214 B
Code key B176
Milling
Deep ball nose slot
2-flute short cutting edge ball nose end mills with straight shank and long neck
R 10

35o
AITiN
D 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5
Coated
0~-0.015
R0.005 R<0.5 R0.01 R0.5
Ordering number
HM-2BP-R0.25-M04 HM-2BP-R0.25-M06 HM-2BP-R0.3-M04 HM-2BP-R0.3-M06 HM-2BP-R0.3-M08 HM-2BP-R0.4-M04 HM-2BP-R0.4-M06 HM-2BP-R0.4-M08 HM-2BP-R0.4-M10 HM-2BP-R0.5-M04 HM-2BP-R0.5-M06 HM-2BP-R0.5-M08 HM-2BP-R0.5-M10 HM-2BP-R0.5-M12 HM-2BP-R0.6-M06 HM-2BP-R0.6-M08 HM-2BP-R0.6-M12 HM-2BP-R0.6-M16 HM-2BP-R0.75-M08 HM-2BP-R0.75-M12 HM-2BP-R0.75-M16 HM-2BP-R1.0-M06 HM-2BP-R1.0-M08 HM-2BP-R1.0-M10 HM-2BP-R1.0-M12 HM-2BP-R1.0-M16 HM-2BP-R1.0-M20 HM-2BP-R1.25-M08 HM-2BP-R1.25-M12 HM-2BP-R1.25-M16 HM-2BP-R1.25-M20
Basic dimension(mm)
R 0.25 0.25 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.75 0.75 0.75 1.0 1.0 1.0 1.0 1.0 1.0 1.25 1.25 1.25 1.25 H 0.7 0.7 0.9 0.9 0.9 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 2.3 2.3 2.3 3.0 3.0 3.0 3.0 3.0 3.0 3.7 3.7 3.7 3.7 d1 0.45 0.45 0.55 0.55 0.55 0.75 0.75 0.75 0.75 0.95 0.95 0.95 0.95 0.95 1.15 1.15 1.15 1.15 1.45 1.45 1.45 1.95 1.95 1.95 1.95 1.95 1.95 2.4 2.4 2.4 2.4 M 4.0 6.0 4.0 6.0 8.0 4.0 6.0 8.0 10.0 4.0 6.0 8.0 10.0 12.0 6.0 8.0 12.0 16.0 8.0 12.0 16.0 6.0 8.0 10.0 12.0 16.0 20.0 8.0 12.0 16.0 20.0 d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
215 B
Milling
Deep ball nose slot
R 10

35o
AITiN
D 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0
Coated
0~-0.015
R0.005 R<0.5 R0.01 R0.5
D M d 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 L 50 50 50 60 60 60 60 60 60 60 70
Ordering number
HM-2BP-R1.5-M08 HM-2BP-R1.5-M10 HM-2BP-R1.5-M12 HM-2BP-R1.5-M16 HM-2BP-R1.5-M20 HM-2BP-R2.0-M10 HM-2BP-R2.0-M16 HM-2BP-R2.0-M20 HM-2BP-R2.0-M25 HM-2BP-R2.5-M16 HM-2BP-R2.5-M25
Basic dimension(mm)
R 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5 H 4.5 4.5 4.5 4.5 4.5 6.0 6.0 6.0 6.0 7.5 7.5 d1 2.85 2.85 2.85 2.85 2.85 3.85 3.85 3.85 3.85 4.85 4.85
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2
8.0 10.0 12.0 16.0 20.0 10.0 16.0 20.0 25.0 16.0 25.0
Tool type: HM-2BP-R0.3-M08 Size: R0.3mm Workpiece materialS13652HRC Rotating speed30000r/min Feed speed200mm/r Axial cutting depth: Ap=0.02mm Radial cutting depth: Ae=0.04mm Cutting style: contour machining (mould of car light) Cooling system: air blow MachineMIKRON HSM 800
End mill Cutting time Abrasion value Abrasion condition
HM-2BP-R0.3-M08
300min
0.025mm
180min
0.048mm

Workpiece material
Copper alloy
Aluminum alloy
Titanium alloy
216 B
Code key B176
Milling
Radius corner slot
Radius shoulder
Profile
Figure 1
Figure 2

35o
AITiN
D 3.0 4.0 4.0 5.0 5.0 6.0 6.0 8.0 8.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0
Coated
0~-0.020
Ordering number
HM-4R-D3.0R0.2 HM-4R-D4.0R0.3 HM-4R-D4.0R0.5 HM-4R-D5.0R0.5 HM-4R-D5.0R1.0 HM-4R-D6.0R0.5 HM-4R-D6.0R1.0 HM-4R-D8.0R0.5 HM-4R-D8.0R1.0 HM-4R-D10.0R0.5 HM-4R-D10.0R1.0 HM-4R-D10.0R2.0 HM-4R-D10.0R3.0 HM-4R-D12.0R0.5 HM-4R-D12.0R1.0 HM-4R-D12.0R2.0 HM-4R-D12.0R3.0
Basic dimension(mm)
R 0.2 0.3 0.5 0.5 1.0 0.5 1.0 0.5 1.0 0.5 1.0 2.0 3.0 0.5 1.0 2.0 3.0 d 4 4 4 6 6 6 6 8 8 10 10 10 10 12 12 12 12 H 8 10 10 13 13 16 16 20 20 25 25 25 25 30 30 30 30 L 50 50 50 50 50 50 50 60 60 75 75 75 75 75 75 75 75
Number of teeth
Z 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Geometry
Figure 1 Figure 2 Figure 2 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2
Solid carbide end mills HM series

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
217 B
Milling
4-flute short cutting edge R end mills with straight shank
Radius shoulder
Profile
Radius corner slot
R D L H d
Short edge design with high rigidity, for cutting with high feed rate at high speed.
35o
AITiN
D 6.0 6.0 8.0 8.0 10.0 10.0 10.0 12.0 12.0 12.0
Coated
0~-0.020
Ordering number
HM-4RF-D6.0R0.5 HM-4RF-D6.0R1.0 HM-4RF-D8.0R0.5 HM-4RF-D8.0R1.0 HM-4RF-10.0R0.5 HM-4RF-D10.0R1.0 HM-4RF-D10.0R2.0 HM-4RF-D12.0R0.5 HM-4RF-D12.0R1.0 HM-4RF-D12.0R2.0
Basic dimension(mm)
R 0.5 1.0 0.5 1.0 0.5 1.0 2.0 0.5 1.0 2.0 d 6.0 6.0 8.0 8.0 10.0 10.0 10.0 12.0 12.0 12.0 H 6 6 8 8 10 10 10 12 12 12 L 50 50 60 60 75 75 75 75 75 75
Number of teeth
Z 4 4 4 4 4 4 4 4 4 4

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
218 B
Code key B176
Milling
Radius shoulder Profile Radius corner slot
4-flute short cutting edge R end mills with straight shank and long neck
Long shank and short cutting edge designed for deep cavity milling.
35o
AITiN
D 6.0 6.0 8.0 8.0 10.0 10.0 10.0 12.0 12.0 12.0 16.0 16.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
HM-4RP-D6.0R0.5 HM-4RP-D6.0R1.0 HM-4RP-D8.0R0.5 HM-4RP-D8.0R1.0 HM-4RP-10.0R0.5 HM-4RP-10.0R1.0 HM-4RP-10.0R2.0 HM-4RP-12.0R0.5 HM-4RP-12.0R1.0 HM-4RP-12.0R2.0 HM-4RP-D16.0R1.0 HM-4RP-D16.0R2.0
Basic dimension(mm)
R 0.5 1.0 0.5 1.0 0.5 1.0 2.0 0.5 1.0 2.0 1.0 2.0 d 6.0 6.0 8.0 8.0 10.0 10.0 10.0 12.0 12.0 12.0 16.0 16.0 d1 5.8 5.8 7.8 7.8 9.6 9.6 9.6 11.5 11.5 11.5 15.5 15.5 H 6.0 6.0 8.0 8.0 10.0 10.0 10.0 12.0 12.0 12.0 16.0 16.0 M 18 18 24 24 30 30 30 36 36 36 40 40 L 75 75 100 100 100 100 100 100 100 100 150 150
Number of teeth
Z 4 4 4 4 4 4 4 4 4 4 4 4

Workpiece material
~60HRC
~68HRC
Stainless steel
Copper alloy
Aluminum alloy
Titanium alloy
Code key B176
219 B
NM series end mills for machining copper

Extremely outstanding NM series end mills, greatly improve the machining performance in copper or copper alloy.
Transcendent sharpness is very suitable for high precision machining copper or
copper alloy.
CrN coating with perfect lubricating property and minimal friction factor, achieves
light and fast cutting process, extra long tool life and high surface quality.
Initial temperature of oxidation() 700 500 400 800 Bonding strength with substrate excellent common
Coating CrN TiN TiCN TiAlN
Micro hardnesshv 1800 2200 2700 2800
Friction factor 0.25 0.4 0.3 0.3
Tool typeNM-2B-R3.0 SizeR3.0mm Workpiece materialC1100 Rotating speed8000r/min (150m/min) Feed speed1200mm/r (0.15mm/r) Axial cutting depthAp=0.3mm Radial cutting depthAe=0.6mm Cutting style: face milling (down milling) Cooling system: air blow MachineMIKRON UCP 1000
Ball nose end mills for machining copper alloy 0.25 0.2 0.15 0.1 0.05 0
NM-2B-R3.0 Similar product of company A
Flank wear(mm)
50
100 Cutting length(m)
150
200
220 B

NM series for machining copper
Milling
Side face
Figure 1
10
Special for slot milling. Sharp cutting edge can achieve higher surface quality.
Figure 2
35o
CrN
D
Coated
0~-0.020
Ordering number
NM-2E-D1.0 NM-2E-D2.0 NM-2E-D3.0 NM-2E-D4.0 NM-2E-D5.0 NM-2E-D6.0 NM-2E-D8.0 NM-2E-D10.0 NM-2E-D12.0
Basic dimension(mm)
d 4 4 6 6 6 6 8 10 12 H 3 6 8 11 13 16 20 25 30 L 50 50 50 50 50 50 60 75 75
Number of teeth
Z 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1
1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0
NM series

Workpiece material
Carbon steel Alloy steel Pre-hardened steelHardened steel ~40HRC ~50HRC ~60HRC ~68HRC Stainless steel Cast iron, Nodular cast iron Copper alloy Aluminum alloy
Titanium alloy
Code key B176
221 B
Milling

Side face
Step shoulder
Straight slot
10 L
Figure 1
Long cutting edge for finish side milling copper electrode.

35o
Figure 2
H L
CrN
D
Coated
0~-0.020
Ordering number
NM-4E-D3.0 NM-4E-D4.0 NM-4E-D5.0 NM-4E-D6.0 NM-4E-D8.0 NM-4E-D10.0 NM-4E-D12.0
Basic dimension(mm)
d 6 6 6 6 8 10 12 H 8 11 13 16 20 25 30 L 50 50 50 50 60 75 75
Number of teeth
Z 4 4 4 4 4 4 4
Indexable milling tools Solid carbide end mills NM series
Geometry
Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2
3.0 4.0 5.0 6.0 8.0 10.0 12.0

Workpiece material
Titanium alloy
222 B
Code key B176

Milling
Deep flattened slot
d1
10
The structure of long neck and short cutting edge can avoid interference in deep cavity milling. D<1mm 1mm D
35o
CrN
D 0.5 0.5 0.5 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 3.0 3.0 4.0 4.0 5.0 5.0
Coated
0~-0.015
Ordering number
NM-2EP-D0.5-M04 NM-2EP-D0.5-M06 NM-2EP-D0.5-M08 NM-2EP-D0.8-M04 NM-2EP-D0.8-M06 NM-2EP-D0.8-M08 NM-2EP-D0.8-M10 NM-2EP-D1.0-M04 NM-2EP-D1.0-M06 NM-2EP-D1.0-M08 NM-2EP-D1.0-M10 NM-2EP-D1.0-M12 NM-2EP-D1.0-M14 NM-2EP-D1.5-M08 NM-2EP-D1.5-M16 NM-2EP-D2.0-M06 NM-2EP-D2.0-M08 NM-2EP-D2.0-M10 NM-2EP-D2.0-M12 NM-2EP-D2.0-M14 NM-2EP-D2.0-M16 NM-2EP-D2.5-M10 NM-2EP-D2.5-M20 NM-2EP-D3.0-M10 NM-2EP-D3.0-M20 NM-2EP-D4.0-M16 NM-2EP-D4.0-M25 NM-2EP-D5.0-M16 NM-2EP-D5.0-M25
Basic dimension(mm)
d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 H 0.7 0.7 0.7 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.5 2.3 2.3 3.0 3.0 3.0 3.0 3.0 3.0 3.7 3.7 4.5 4.5 6.0 6.0 7.5 7.5 M 4.0 6.0 8.0 4.0 6.0 8.0 10.0 4.0 6.0 8.0 10.0 12.0 14.0 8.0 16.0 6.0 8.0 10.0 12.0 14.0 16.0 10.0 20.0 10.0 20.0 16.0 25.0 16.0 25.0 d1 0.45 0.45 0.45 0.75 0.75 0.75 0.75 0.95 0.95 0.95 0.95 0.95 0.95 1.45 1.45 1.95 1.95 1.95 1.95 1.95 1.95 2.4 2.4 2.85 2.85 3.85 3.85 4.85 4.85 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 50 60 60 60 60 70
Number of teeth
Z 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
NM series

Workpiece material
Titanium alloy
Code key B176
223 B
Milling

Profile
Cavity
Ball nose slot
Figure 1
For profile milling. Very perfect surface quality.

35o
Figure 2
CrN
D 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 8.0 10.0 12.0
Coated
0~-0.020
R0.01
Ordering number
NM-2B-R0.5 NM-2B-R0.75 NM-2B-R1.0 NM-2B-R1.25 NM-2B-R1.5 NM-2B-R1.75 NM-2B-R2.0 NM-2B-R2.5 NM-2B-R3.0 NM-2B-R4.0 NM-2B-R5.0 NM-2B-R6.0
Basic dimension(mm)
R 0.5 0.75 1.0 1.25 1.5 1.75 2.0 2.5 3.0 4.0 5.0 6.0 d 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 8.0 10.0 12.0 H 2.0 3.0 4.0 5.0 6.0 8.0 8.0 10.0 12.0 16.0 20.0 24.0 L 50 50 50 50 50 50 50 50 50 60 75 75
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2
Geometry

Workpiece material
Titanium alloy
224 B
Code key B176

Milling
Deep ball nose slot
R 10
d1
Very suitable for 3D machining copper electrode.

35o
CrN
D 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0
Coated
0~-0.015
R0.005 R<0.5 R0.01 R0.5
Ordering number
NM-2BP-R0.25-M04 NM-2BP-R0.25-M06 NM-2BP-R0.3-M04 NM-2BP-R0.3-M06 NM-2BP-R0.3-M08 NM-2BP-R0.4-M04 NM-2BP-R0.4-M06 NM-2BP-R0.4-M08 NM-2BP-R0.4-M10 NM-2BP-R0.5-M04 NM-2BP-R0.5-M06 NM-2BP-R0.5-M08 NM-2BP-R0.5-M10 NM-2BP-R0.5-M12 NM-2BP-R0.75-M08 NM-2BP-R0.75-M16 NM-2BP-R1.0-M06 NM-2BP-R1.0-M08 NM-2BP-R1.0-M10 NM-2BP-R1.0-M12 NM-2BP-R1.0-M16 NM-2BP-R1.0-M20 NM-2BP-R1.5-M10 NM-2BP-R1.5-M20 NM-2BP-R2.0-M10 NM-2BP-R2.0-M16 NM-2BP-R2.0-M20 NM-2BP-R2.0-M25 NM-2BP-R2.5-M16 NM-2BP-R2.5-M25
Basic dimension(mm)
R 0.25 0.25 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.75 0.75 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5 H 0.7 0.7 0.9 0.9 0.9 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 2.3 2.3 3.0 3.0 3.0 3.0 3.0 3.0 4.5 4.5 6.0 6.0 6.0 6.0 7.5 7.5 d1 0.45 0.45 0.55 0.55 0.55 0.75 0.75 0.75 0.75 0.95 0.95 0.95 0.95 0.95 1.45 1.45 1.95 1.95 1.95 1.95 1.95 1.95 2.85 2.85 3.85 3.85 3.85 3.85 4.85 4.85 M 4.0 6.0 4.0 6.0 8.0 4.0 6.0 8.0 10.0 4.0 6.0 8.0 10.0 12.0 8.0 16.0 6.0 8.0 10.0 12.0 16.0 20.0 10.0 20.0 10.0 16.0 20.0 25.0 16.0 25.0 d 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 L 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 50 60 60 60 60 60 60 70
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Titanium alloy
Code key B176
225 B
series end mills for machining aluminum

Completed product category, realize machining Al alloy from general to ultrahigh speed.
Tool typeAL-3E-D6.0 Size6.0mm Workpiece materialLC4 Rotating speed13000r/min (250m/min) Feed speed1950mm/r (0.15mm/r) Axial cutting depthAp=9.0mm Radial cutting depthAe=1.0mm Cutting style : complicated cavity machining Cooling system: air blow MachineMIKRON UCP 1000
AL
Indexable milling tools Solid carbide end mills AL series
Brand-new AL-2R, AL-2RL, AL-3R, AL-3RL series are released for ultrahigh speed milling aerospace Al alloy.
Anti-vibration design of whole cutting edge Wiper benefit to improve surface quality
All end mills pass through dynamic balance and security tests.
Big chip pocket is suitable for high feed machining
AL-3R ultrahigh speed machining performance

Tool typeAL-3R-D20.0R3.0-AIR Size20.0mm Workpiece materialA7075 Cutting speed1500m/min Rotating speed25000r/min Feed rate per tooth0.48mm/r Feed speed12000mm/min Axial cutting depthAp=12mm Radial cutting depthAe=12mm Metal removal rate1800cm3/min Cutting style: side milling ( down milling) Cooling system: air blow Machine: horizontal machining center
Note: cutting speed reach 1500m/min, metal removal rate is 1800cm3/min
226 B

AL series for machining aluminum
Milling
Side face
Figure 1
Good chip removal performance, high machining efficiency.

55o
D
D12 0~-0.020 12<D 0~-0.030
Figure 2
Ordering number
AL-2E-D1.0 AL-2E-D1.5 AL-2E-D2.0 AL-2E-D2.5 AL-2E-D3.0 AL-2E-D4.0 AL-2E-D5.0 AL-2E-D6.0 AL-2E-D8.0 AL-2E-D10.0 AL-2E-D12.0 AL-2E-D16.0 AL-2E-D20.0
Basic dimension(mm)
D 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 d 4 4 4 4 6 6 6 6 8 10 12 16 20 H 3 4 6 7 9 12 15 18 20 30 32 45 45 L 50 50 50 50 50 50 50 60 60 75 75 100 100
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1
AL series
Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Titanium alloy
Code key B176
227 B
Milling

Side face
Step shoulder
Straight slot
Figure 1
AL-2E series with long cutting edge.

55o
D
D12 0~-0.020 12<D 0~-0.030
Figure 2
Ordering number
AL-2EL-D3.0 AL-2EL-D4.0 AL-2EL-D5.0 AL-2EL-D6.0 AL-2EL-D8.0 AL-2EL-D10.0 AL-2EL-D12.0 AL-2EL-D16.0 AL-2EL-D20.0
Basic dimension(mm)
D 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 d 6 6 6 6 8 10 12 16 20 H 12 16 20 25 32 45 45 65 75 L 60 60 60 75 75 100 100 150 150
Number of teeth
Z 2 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Titanium alloy
228 B
Code key B176

Milling
Side face
Figure 1
Outstanding cutting performance without vibration, realize high precision machining.
Figure 2
45o
D12 0~-0.020 12<D 0~-0.030
Ordering number
AL-3E-D1.0 AL-3E-D1.5 AL-3E-D2.0 AL-3E-D2.5 AL-3E-D3.0 AL-3E-D4.0 AL-3E-D5.0 AL-3E-D6.0 AL-3E-D8.0 AL-3E-D10.0 AL-3E-D12.0 AL-3E-D16.0 AL-3E-D20.0
Basic dimension(mm)
D 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 16.0 20.0 d 4 4 4 4 6 6 6 6 8 10 12 16 20 H 3 4 6 7 9 12 15 18 20 30 32 45 45 L 50 50 50 50 50 50 50 60 60 75 75 100 100
Number of teeth
Z 3 3 3 3 3 3 3 3 3 3 3 3 3
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2 Figure 2
Solid carbide end mills AL series

Workpiece material
Titanium alloy
Code key B176
229 B
Milling

Profile
Cavity
Ball nose slot
Figure 1
For profile milling Al alloy.

35o
D
0~-0.020
Figure 2
R0.01
Ordering number
AL-2B-R1.0 AL-2B-R1.5 AL-2B-R2.0 AL-2B-R2.5 AL-2B-R3.0 AL-2B-R4.0 AL-2B-R5.0 AL-2B-R6.0
Basic dimension(mm)
D 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 R 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 d 6.0 6.0 6.0 6.0 6.0 8.0 10.0 12.0 H 4.0 6.0 8.0 10.0 12.0 16.0 20.0 24.0 L 60 60 60 60 60 75 75 75
Number of teeth
Z 2 2 2 2 2 2 2 2
Geometry
Figure 1 Figure 1 Figure 1 Figure 1 Figure 2 Figure 2 Figure 2 Figure 2

Workpiece material
Titanium alloy
230 B
Code key B176

Milling
3-flute corrugated edges flattened end mills with straight shank
Side face
For rough machining Al alloy.

30o
D
D6 0~-0.048 6D10 0~-0.058 10D18 0~-0.07 18<D 0~-0.084
Ordering number
AL-3W-D6.0 AL-3W-D8.0 AL-3W-D10.0 AL-3W-D12.0 AL-3W-D16.0 AL-3W-D20.0
Basic dimension(mm)
D 6 8 10 12 16 20 d 6 8 10 12 16 20 H 16 20 25 30 45 45 L 50 60 75 75 100 100
Number of teeth
Z 3 3 3 3 3 3

Workpiece material
Titanium alloy
Code key B176
231 B
Milling
Ultrahigh speed

Radius shoulder
Profile
Radius corner slot
Very suitable for ultrahigh speed machining aerospace Al components.

30o
D
D12 0~-0.020 12<D 0~-0.030
Ordering number
AL-2R-D6.0R1.0- AIR AL-2R-D8.0R1.0- AIR AL-2R-D10.0R1.0- AIR AL-2R-D10.0R2.0- AIR AL-2R-D12.0R1.0- AIR AL-2R-D12.0R2.0- AIR AL-2R-D12.0R3.0- AIR AL-2R-D16.0R1.0- AIR AL-2R-D16.0R2.0- AIR AL-2R-D16.0R3.0- AIR AL-2R-D16.0R4.0- AIR AL-2R-D20.0R1.0- AIR AL-2R-D20.0R2.0- AIR AL-2R-D20.0R3.0- AIR AL-2R-D20.0R4.0- AIR AL-2R-D20.0R5.0- AIR AL-2R-D20.0R6.0- AIR
Basic dimension(mm)
D 6 8 10 10 12 12 12 16 16 16 16 20 20 20 20 20 20 R 1.0 1.0 1.0 2.0 1.0 2.0 3.0 1.0 2.0 3.0 4.0 1.0 2.0 3.0 4.0 5.0 6.0 d 6 8 10 10 12 12 12 16 16 16 16 20 20 20 20 20 20 d1 5.5 7.4 9.2 9.2 11 11 11 15 15 15 15 19 19 19 19 19 19 H 7 9 11 11 12 12 12 16 16 16 16 20 20 20 20 20 20 M 20 26 31 31 37 37 37 43 43 43 43 53 53 53 53 53 53 L 57 63 72 72 83 83 83 92 92 92 92 104 104 104 104 104 104
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Titanium alloy
232 B
Code key B176

Milling
Profile Radius corner slot
2-flute R end mills with long straight shank

Ultrahigh speed
Radius shoulder
Very suitable for ultrahigh speed machining aerospace Al component.

30o
D
D12 0~-0.020 12<D 0~-0.030
Ordering number
AL-2RL-D6.0R1.0- AIR AL-2RL-D8.0R1.0- AIR AL-2RL-D10.0R1.0- AIR AL-2RL-D10.0R2.0- AIR AL-2RL-D12.0R1.0- AIR AL-2RL-D12.0R2.0- AIR AL-2RL-D12.0R3.0- AIR AL-2RL-D16.0R1.0- AIR AL-2RL-D16.0R2.0- AIR AL-2RL-D16.0R3.0- AIR AL-2RL-D16.0R4.0- AIR AL-2RL-D20.0R1.0- AIR AL-2RL-D20.0R2.0- AIR AL-2RL-D20.0R3.0- AIR AL-2RL-D20.0R4.0- AIR AL-2RL-D20.0R5.0- AIR AL-2RL-D20.0R6.0- AIR
Basic dimension(mm)
D 6 8 10 10 12 12 12 16 16 16 16 20 20 20 20 20 20 R 1.0 1.0 1.0 2.0 1.0 2.0 3.0 1.0 2.0 3.0 4.0 1.0 2.0 3.0 4.0 5.0 6.0 d 6 8 10 10 12 12 12 16 16 16 16 20 20 20 20 20 20 d1 5.5 7.4 9.2 9.2 11 11 11 15 15 15 15 19 19 19 19 19 19 H 7 9 11 11 12 12 12 16 16 16 16 20 20 20 20 20 20 M 43 53 59 59 74 74 74 84 84 84 84 89 89 89 89 89 89 L 80 90 100 100 120 120 120 140 140 140 140 140 140 140 140 140 140
Number of teeth
Z 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Workpiece material
Titanium alloy
Code key B176
233 B
Milling
Ultrahigh speed

Radius shoulder
Profile
Radius corner slot
Very suitable for ultrahigh speed machining aerospace Al components.

30o
D
0~-0.030
Ordering number
AL-3R-D12.0R1.0- AIR AL-3R-D12.0R2.0- AIR AL-3R-D12.0R3.0- AIR AL-3R-D16.0R1.0- AIR AL-3R-D16.0R2.0- AIR AL-3R-D16.0R3.0- AIR AL-3R-D16.0R4.0- AIR AL-3R-D20.0R1.0- AIR AL-3R- D20.0R2.0- AIR AL-3R- D20.0R3.0- AIR AL-3R-D20.0R4.0- AIR AL-3R- D20.0R5.0- AIR AL-3R- D20.0R6.0- AIR
Basic dimension(mm)
D 12 12 12 16 16 16 16 20 20 20 20 20 20 R 1.0 2.0 3.0 1.0 2.0 3.0 4.0 1.0 2.0 3.0 4.0 5.0 6.0 d 12 12 12 16 16 16 16 20 20 20 20 20 20 d1 11 11 11 15 15 15 15 19 19 19 19 19 19 H 12 12 12 16 16 16 16 20 20 20 20 20 20 M 37 37 37 43 43 43 43 53 53 53 53 53 53 L 83 83 83 92 92 92 92 104 104 104 104 104 104
Number of teeth
Z 3 3 3 3 3 3 3 3 3 3 3 3 3

Workpiece material
Titanium alloy
234 B
Code key B176

Milling
Profile Radius corner slot
3-flute R end mills with long straight shank

Ultrahigh speed
Radius shoulder
Very suitable for ultrahigh speed machining aerospace Al component.

30o
D
0~-0.030
Ordering number
AL-3RL-D12.0R1.0- AIR AL-3RL-D12.0R2.0- AIR AL-3RL-D12.0R3.0- AIR AL-3RL-D16.0R1.0- AIR AL-3RL-D16.0R2.0- AIR AL-3RL-D16.0R3.0- AIR AL-3RL-D16.0R4.0- AIR AL-3RL-D20.0R1.0- AIR AL-3RL- D20.0R2.0- AIR AL-3RL- D20.0R3.0- AIR AL-3RL-D20.0R4.0- AIR AL-3RL- D20.0R5.0- AIR AL-3RL- D20.0R6.0- AIR
Basic dimension(mm)
D 12 12 12 16 16 16 16 20 20 20 20 20 20 R 1.0 2.0 3.0 1.0 2.0 3.0 4.0 1.0 2.0 3.0 4.0 5.0 6.0 d 12 12 12 16 16 16 16 20 20 20 20 20 20 d1 11 11 11 15 15 15 15 19 19 19 19 19 19 H 12 12 12 16 16 16 16 20 20 20 20 20 20 M 74 74 74 84 84 84 84 89 89 89 89 89 89 L 120 120 120 140 140 140 140 140 140 140 140 140 140
Number of teeth
Z 3 3 3 3 3 3 3 3 3 3 3 3 3

Workpiece material
Titanium alloy
Code key B176
235 B
SM
series end mills for machining stainless steel, heat-resistant alloy etc materials hard to cut
Large helical and rake angle, sharp cutting edge, unique edge geometry can retrain cutting-heats influence to tool nose, greatly improve wear resistance and melt resistance. The coating with good heat resistance can achieve stable machining even at high temperature. Very suitable for machining stainless steel, Ni substrate high temperature alloy etc materials hard to cut.
Tool typeSM-3E-D6.0 Size6mm Workpiece material1Cr18Ni9Ti Rotating speed3700r/min (70m/min) Feed speed555mm/min (0.15mm/r) Axial cutting depthAp=9mm Radial cutting depthAe=0.6mm Cutting style: side milling ( down milling) Cooling system: oil water emulsion MachineMIKRON UCP 1000 0.6 9
End mills Cutting length Abrasion of peripheral edge
SM-3E-D6.0 100m Even abrasion on cutting edge, value is 0.08 mm
Similar product of company A 100m Cutting edge is aked fully, value is 0.135mm
Abrasion condition of peripheral edge
236 B
SM series for machining materials hard to cut
Milling
Side face
Figure 1
Large helical angle for machining Austenite stainless steel, heatresistant alloy etc materials hard to cut.
Figure 2
45o
AITiN
D 3 4 5 6 7 8 9 10 11 12 16 20
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
SM-3E-D3.0 SM-3E-D4.0 SM-3E-D5.0 SM-3E-D6.0 SM-3E-D7.0 SM-3E-D8.0 SM-3E-D9.0 SM-3E-D10.0 SM-3E-D11.0 SM-3E-D12.0 SM-3E-D16.0 SM-3E-D20.0
Basic dimension(mm)
d 6 6 6 6 8 8 10 10 12 12 16 20 H 8 11 13 16 20 20 22 25 26 30 45 45 L 50 50 50 50 60 60 75 75 75 75 100 100
Number of teeth
Z 3 3 3 3 3 3 3 3 3 3 3 3
Geometry
Solid carbide end mills SM series

Workpiece material
Titanium alloy
Code key B176
237 B
Milling
SM series for machining materials hard to cut
Radius shoulder
Profile
Radius corner slot
Large helical angle and strong nose for machining Austenite stainless steel, heat-resistant alloy etc materials hard to cut.
45o
AITiN
D 6.0 6.0 8.0 8.0 10.0 10.0 12.0 12.0
Coated
D12 0~-0.020 12<D 0~-0.030
Ordering number
SM-4R-D6.0R0.5 SM-4R-D6.0R1.0 SM-4R-D8.0R0.5 SM-4R-D8.0R1.0 SM-4R-D10.0R0.5 SM-4R-D10.0R1.0 SM-4R-D12.0R0.5 SM-4R-D12.0R1.0
Basic dimension(mm)
R 0.5 1.0 0.5 1.0 0.5 1.0 0.5 1.0 d 6 6 8 8 10 10 12 12 H 16 16 20 20 25 25 30 30 L 50 50 60 60 75 75 75 75
Number of teeth
Z 4 4 4 4 4 4 4 4
Indexable milling tools Solid carbide end mills SM series

Workpiece material
Titanium alloy
238 B
Code key B176

GM series cutting parameters
Milling
GM-2EGM-2EL
Workpiece material
Diameter (mm)

Rotating speed (min-1) 20000 15000 14000 10800 8200 7000 5200 4200 3500 3000 2600 2300 2050 Feed speed (mm/min) 165 265 455 465 485 500 495 485 485 455 455 445 445
Carbon steel, Alloy steel ~750N/mm2
Pre-hardened steel, Pre-hardened steel, Quenched and Quenched and Stainless steel tempered steel tempered steel ~40HRC ~50HRC Rotating Rotating Rotating Rotating Rotating Feed Feed Feed Feed Feed speed speed speed speed speed speed speed speed speed speed -1 -1 -1 -1 -1 (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) Carbon steel, Alloy steel ~30HRC
20000 15000 14000 10800 8200 7000 5200 4200 3500 3000 2600 2300 2050 165 265 455 465 485 500 495 485 485 455 455 445 445 20000 15000 13000 10000 7600 6400 4800 3800 3200 2700 2400 2100 1900 135 240 420 430 450 460 455 450 450 420 420 410 410 20000 15000 10600 8000 6400 5300 4000 3200 2650 2300 2000 1800 1600 135 235 350 355 370 385 380 370 370 350 350 345 345 20000 11150 7500 5500 4500 3700 2800 2200 1850 1600 1400 1250 1100 50 70 100 110 110 115 115 115 115 110 100 100 100 20000 13000 8500 6500 5000 4200 3200 2500 2100 1800 1600 1400 1250 Ae=0.05D 100 150 275 280 295 300 305 290 290 275 275 270 270
1 2 3 4 5 6 8 10 12 14 16 18 20
Indexable milling tools Solid carbide end mills GM series cutting parameters
Ae=0.1D
Ap=1D
Ap=1D
Maximum cutting depth

Ae=1D Milling slot Ap Tools Diameter Cutting depth Ap
1D<3 3D 0.15D 0.3D
Ae=1D Ap=0.05D
1.The above table shows the standard value of side milling. When milling slot, 50%~70% of rotating speed and 40%~60% of feed speed stated above are recommended. 2.Please select high precise machine and tool holder. 3.Please use air blow or cutting liquid with high mist retardant property. 4.Down milling is recommended in side milling. 5.Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 6.Make overhang as short as possible if no interference.
239 B
Milling
Workpiece material
Diameter (mm)

GM-4EGM-4EL
Pre-hardened steel, Pre-hardened steel, Quenched and Quenched and Stainless steel tempered steel tempered steel ~40HRC ~50HRC Rotating Rotating Rotating Rotating Rotating Rotating Feed Feed Feed Feed Feed Feed speed speed speed speed speed speed speed speed speed speed speed speed (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) Cast iron, Nodular cast iron Carbon steel, Alloy steel ~750N/mm2 Carbon steel, Alloy steel ~30HRC
20000 15000 14000 10800 8200 7000 5200 4200 3500 3000 2600 2300 2050 250 400 680 700 730 750 740 730 730 680 680 670 670 20000 15000 14000 10800 8200 7000 5200 4200 3500 3000 2600 2300 2050 250 400 680 700 730 750 740 730 730 680 680 670 670 20000 15000 13000 10000 7600 6400 4800 3800 3200 2700 2400 2100 1900 200 360 630 640 670 690 680 670 670 630 630 620 620 20000 15000 10600 8000 6400 5300 4000 3200 2650 2300 2000 1800 1600 200 350 525 535 560 575 565 560 560 525 525 515 515 20000 11150 7500 5500 4500 3700 2800 2200 1850 1600 1400 1250 1100 90 100 120 125 125 135 135 135 135 125 120 105 105 20000 13000 8500 6500 5000 4200 3200 2500 2100 1800 1600 1400 1250 Ae=0.05D 150 225 410 420 440 450 460 435 435 410 410 405 405
2 3 4 5 6 8 10 12 14 16 18 20
Ae=0.1D
Ap=1.5D
Ap=1.5D

1D<3 3D 0.15D 0.3D
Ae=1D Ap=0.05D
240 B

Milling
GM-6E
Workpiece material
Diameter (mm)
Pre-hardened steel, Pre-hardened steel, Quenched and Quenched and Stainless steel tempered steel tempered steel ~40HRC ~50HRC Rotating Rotating Rotating Rotating Rotating Rotating Feed Feed Feed Feed Feed Feed speed speed speed speed speed speed speed speed speed speed speed speed -1 -1 -1 -1 -1 -1 (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) Cast iron, Nodular cast iron Carbon steel, Alloy steel ~750N/mm2 Carbon steel, Alloy steel ~30HRC
7000 5200 4200 3500 3000 2600 2300 2050 890 890 860 860 810 810 800 800 7000 5200 4200 3500 3000 2600 2300 2050 890 890 860 860 810 810 800 800 6400 4800 3800 3200 2700 2400 2100 1900 820 820 800 800 750 750 740 740 Ae=0.05D 5300 4000 3200 2650 2300 2000 1800 1600 680 680 665 665 625 625 615 615 3700 2800 2200 1850 1600 1400 1250 1100 160 160 160 160 150 150 125 125 4200 3200 2500 2100 1800 1600 1400 1250 540 550 520 520 490 490 485 485
6 8 10 12 14 16 18 20
Ap=1.5D
1.Please select high precise machine and tool holder. 2.Please use air blow or cutting liquid with high mist retardant property. 3.Down milling is recommended in side milling. 4.Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 5.Make overhang as short as possible if no interference.
241 B
Milling
GM-6EL
Workpiece material
Diameter (mm)

5800 4400 3500 2900 2500 2200 1950 1750 750 750 730 730 685 685 675 675 5800 4400 3500 2900 2500 2200 1950 1750 750 750 730 730 685 685 675 675 5300 4000 3200 2650 2300 2000 1800 1600 685 685 665 665 625 625 615 615 Ae=0.02D 4250 3180 2550 2120 1820 1590 1420 1270 545 545 530 530 500 500 490 490 2650 2000 1600 1350 1150 1000 900 800 115 115 115 115 105 105 90 90 3600 2700 2150 1800 1550 1350 1200 1050 460 465 440 440 415 415 410 410
8 10 12 14 16 18 20
Ap=3D
242 B

Milling
Stainless steel
Rotating speed (min-1) 25000 20000 20000 25000 21000 18000 18000 20000 20000 18000 15000 15000 12000 17000 14000 14000 11000 14000 12000 12000 12000 12000 11000 11000 9000 9000 9000 9000 Feed speed (mm/min) 100 75 50 200 150 100 75 300 300 200 200 150 100 300 200 200 150 300 200 200 200 180 350 350 250 250 200 150 Ap (mm) 0.014 0.004 0.003 0.035 0.022 0.016 0.006 0.05 0.04 0.03
GM-2EP
Workpiece material
Diameter (mm) Effective length (mm) 4 6 8 4
Cast iron, Carbon steel, Alloy steel ~750N/mm2 Feed Rotating Ap speed speed (mm) -1 (min ) (mm/min)
28000 22000 18000 32000 26000 22000 22000 29000 29000 24000 20000 20000 18000 25000 21000 21000 18000 20000 19000 19000 19000 19000 16000 16000 14000 14000 14000 14000 200 150 100 400 300 200 150 800 800 600 500 300 200 800 600 600 400 800 600 600 600 500 800 800 600 600 500 400 0.023 0.007 0.005 0.057 0.036 0.026 0.01 0.08 0.07 0.05 0.03 0.02 0.015 0.09 0.07 0.06 0.04 0.15 0.11 0.09 0.07 0.06 0.34 0.29 0.26 0.14 0.10 0.08
Carbon steel, Alloy steel ~30HRC

Rotating speed (min-1) 28000 22000 18000 32000 26000 22000 22000 27000 27000 23000 19000 19000 15000 23000 20000 20000 17000 18000 16000 16000 16000 16000 15000 15000 1300 13000 13000 13000 Feed speed (mm/min) 175 125 75 350 250 150 100 600 600 400 400 200 150 600 400 400 300 600 400 400 400 350 600 600 400 400 350 300 Ap (mm) 0.021 0.006 0.005 0.053 0.034 0.024 0.01 0.08 0.07 0.04 0.03 0.02 0.01 0.08 0.07 0.05 0.04 0.14 0.10 0.08 0.06 0.05 0.31 0.26 0.24 0.13 0.11 0.08
Pre-hardened steel, Quenched and tempered steel ~40HRC Rotating Feed Ap speed speed (mm) -1 (min ) (mm/min)
28000 22000 18000 32000 26000 22000 22000 26000 26000 22000 18000 18000 15000 22000 19000 19000 16000 18000 15000 15000 15000 15000 14000 14000 12000 12000 12000 12000 150 100 75 300 200 125 75 400 400 300 300 175 125 400 300 300 200 400 300 300 300 250 450 450 300 300 250 200 0.018 0.005 0.004 0.044 0.028 0.020 0.008 0.07 0.06 0.04 0.03 0.02 0.01 0.07 0.05 0.04 0.03 0.11 0.08 0.06 0.05 0.04 0.26 0.22 0.20 0.11 0.09 0.07
0.5
0.8
6 8 10 4 6
1.0
8 10 12 14 6
0.02 0.01 0.008 0.05 0.04 0.03 0.02 0.09 0.07 0.05 0.04 0.03 0.21 0.18 0.16 0.09 0.07 0.06
1.2
8 10 12 6 8
1.5
10 12 14 6 8
2.0
10 12 14 16
(Once cutting depth)
243 B
Milling
GM-2EP
Workpiece material
Diameter (mm) Effective length (mm) 8 10

Cast iron, Carbon steel, Alloy steel ~750N/mm2 Feed Rotating Ap speed speed (mm) -1 (min ) (mm/min)
13000 13000 13000 12000 12000 12000 12000 11000 11000 11000 11000 11000 10000 10000 10000 8000 8000 7000 7000 6000 5000 800 800 800 600 600 600 600 800 800 800 800 600 600 600 500 800 800 600 600 800 800 0.42 0.36 0.24 0.18 0.13 0.11 0.09 0.42 0.39 0.31 0.29 0.27 0.22 0.16 0.12 0.42 0.39 0.34 0.30 0.49 0.45

Rotating speed (min-1) 12000 12000 12000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 7000 7000 7000 7000 6000 5000 Feed speed (mm/min) 600 600 600 400 400 350 350 600 600 600 500 450 400 400 350 600 500 400 400 500 400 Ap (mm) 0.39 0.33 0.23 0.17 0.12 0.10 0.08 0.39 0.36 0.29 0.27 0.25 0.20 0.14 0.10 0.38 0.35 0.30 0.27 0.45 0.42
Pre-hardened steel, Quenched and tempered steel ~40HRC Rotating Feed Ap speed speed (mm) -1 (min ) (mm/min)
11000 11000 11000 9000 9000 9000 9000 10000 10000 10000 10000 10000 9000 9000 9000 7000 7000 6000 6000 5000 5000 450 450 450 300 300 250 250 450 450 450 400 350 300 300 250 450 400 350 350 400 350 0.33 0.28 0.19 0.14 0.09 0.07 0.05 0.32 0.30 0.24 0.22 0.20 0.17 0.12 0.08 0.32 0.30 0.27 0.24 0.38 0.35
Stainless steel
Rotating speed (min-1) 9000 9000 9000 7000 7000 7000 7000 8000 8000 8000 8000 8000 6000 6000 6000 6000 6000 5000 5000 5000 5000 Feed speed (mm/min) 350 350 350 250 250 200 200 350 350 350 300 250 200 200 175 350 300 250 250 300 250 Ap (mm) 0.26 0.22 0.15 0.11 0.08 0.07 0.05 0.27 0.24 0.19 0.16 0.15 0.13 0.10 0.07 0.26 0.24 0.20 0.15 0.30 0.25
12
2.5
14 16 18 20 6 8 10
3.0
12 14 16 18 20 12
4.0
16 20 25
5.0
16 25
1.Please select high precise machine and tool holder. 2.Please use air blow or cutting liquid with high mist retardant property. 3.Make overhang as short as possible if no interference. 4.Reduce feed speed correspondingly when rotating speed is low.
244 B

Milling
Stainless steel
Rotating speed (min-1) 32000 27500 22000 18500 18500 13500 13500 10000 7000 7000 4700 4700
GM-2ES
Workpiece material
Diameter (mm)

Rotating speed (min-1) 32000 32000 32000 32000 32000 24500 24500 21000 13000 13000 8700 8700
Pre-hardened steel, Carbon steel, Alloy steel Carbon steel, Alloy steel Quenched and tempered steel ~750N/mm2 ~30HRC ~40HRC Rotating Rotating Rotating Feed speed Feed speed Feed speed Feed speed speed speed speed (mm/min) (mm/min) (mm/min) (mm/min) -1 -1 (min ) (min ) (min-1)
115 125 125 125 125 125 125 140 140 160 200 235 32000 32000 32000 32000 32000 24500 24500 25000 15000 15000 10000 10000 115 125 125 125 125 125 125 165 165 185 240 270 32000 32000 29500 24500 24500 18500 18500 16800 11800 11800 8200 8200 115 125 125 125 125 125 125 130 130 145 185 220 32000 32000 25000 21000 21000 15500 15500 14500 10000 10000 6600 6600 80 90 90 90 90 90 90 90 90 100 100 100
Feed speed (mm/min) 40 50 50 50 50 50 50 50 50 60 60 75
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0 2.5 3.0
Ae=1D
Milling slot Ap Tools Diameter Cutting depth Ap

D<1 1D3 0.05D 0.15D
1.Please select high precise machine and tool holder. 2.Please use air blow or cutting liquid with high mist retardant property. 3.Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 4.Make overhang as short as possible if no interference.
245 B
Milling
Workpiece material
Diameter (mm)

GM-2BGM-2BL
40000 24000 15500 11500 9500 8000 6000 4800 4000 3000 2400 800 900 950 950 1050 1050 1300 1200 1100 1050 950 40000 24000 15500 11500 9500 8000 6000 4800 4000 3000 2400 800 900 950 950 1050 1050 1300 1200 1100 1050 950 38000 19000 12750 9550 7650 6400 4800 3800 3200 2400 1900 700 760 760 760 800 800 950 900 840 800 680 32000 16000 10600 8000 6400 5300 4000 3200 2650 2000 1600 320 400 450 550 550 580 700 650 610 600 560 22300 11150 7400 5550 4450 3700 2750 2200 1850 1350 1100 200 230 290 370 370 390 455 430 430 380 370 25000 13000 8500 6500 5000 4200 3200 2500 2100 1600 1250 275 275 280 370 375 390 440 440 420 375 330
R0.5
R1.0 R1.5 R2.0 R2.5 R3.0 R4.0 R5.0 R6.0 R8.0 R10.0

Ae=0.2R
Ap=0.1R Ap=0.05R Ae=0.1R
246 B

Milling
Stainless steel Pre-hardened steel, Quenched and tempered steel ~50HRC
80m/min
GM-4B
Workpiece material
Cutting speed Diameter (mm)

150 m/min
Carbon steel, Alloy steel ~750N/mm2

150m/min

120m/min
Pre-hardened steel, Quenched and tempered steel ~40HRC

100m/min
70m/min
Rotating Rotating Rotating Rotating Rotating Rotating Feed Feed Feed Feed Feed Feed speed speed speed speed speed speed speed speed speed speed speed speed -1 -1 -1 -1 -1 -1 (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) (min ) (mm/min) 15500 11500 9500 8000 6000 4800 4000 3000 2400 1710 1710 1890 1890 2340 2160 1980 1890 1710 15500 11500 9500 8000 6000 4800 4000 3000 2400 1710 1710 1890 1890 2340 2160 1980 1890 1710 12750 9550 7650 6400 4800 3800 3200 2400 1900 1340 1340 1440 1440 1710 1620 1510 1440 1220 10600 8000 6400 5300 4000 3200 2650 2000 1600 810 990 990 1040 1260 1170 1100 1080 1000 7400 5550 4450 3700 2750 2200 1850 1350 1100 520 660 660 700 820 770 770 680 660 8500 6500 5000 4200 3200 2500 2100 1600 1250 500 665 675 700 790 790 755 675 595
R1.5 R2.0 R2.5 R3.0 R4.0 R5.0 R6.0 R8.0 R10.0

Ae=0.2R
Ap=0.1R
Ap=0.05D Ae=0.1D
247 B
Milling
GM-2BS
Workpiece material
Diameter (mm)


Rotating speed (min-1) 32000 32000 32000 32000 32000 32000 32000 32000 24000 15500
Pre-hardened steel, Carbon steel, Alloy steel Carbon steel, Alloy steel Quenched and tempered steel ~750N/mm2 ~30HRC ~40HRC Rotating Rotating Rotating Feed speed Feed speed Feed speed Feed speed speed speed speed (mm/min) (mm/min) (mm/min) (mm/min) -1 -1 (min ) (min ) (min-1)
300 380 460 535 550 610 700 765 900 950 32000 32000 32000 32000 32000 32000 32000 32000 24000 15500 300 380 460 535 550 610 700 765 900 950 32000 32000 32000 32000 32000 32000 32000 32000 19000 12750 270 320 410 500 520 560 600 640 760 760 32000 32000 32000 32000 32000 32000 25000 25000 16000 10600 250 300 330 420 440 460 400 400 400 450
Stainless steel
Rotating speed (min-1) 32000 32000 32000 32000 32000 27500 27500 22000 11150 7400
Feed speed (mm/min) 150 175 205 265 270 285 285 285 230 290
R0.15
R0.2 R0.25 R0.3 R0.35 R0.4 R0.45 R0.5 R1.0 R1.5
Ap

Ae
Milling slot
Tools Diameter
D<1 1D3
Cutting depth Ap
0.05R 0.1R
Cutting width Ae
0.2R 0.2R
248 B

Milling
Ae (mm) 0.025 0.015 0.12 0.12 0.12 0.16 0.12 0.12 0.09 0.20
GM-2BP
Cast iron, Carbon steel, Alloy Carbon steel, Alloy steel steel ~30HRC 2 ~750N/mm Effective Rotating Feed Rotating Feed Ap Ae Diameter length Ap Ae speed speed speed speed (mm) (mm) (mm) (mm) (min-1) (mm/min) (mm) (mm) (min-1) (mm/min)
Workpiece material
Pre-hardened steel, Quenched Stainless steel and tempered steel ~40HRC Rotating Feed Ap Ae Rotating Feed Ap speed speed speed speed (mm) (mm) (min-1) (mm/min) (min-1) (mm/min) (mm)
300 160 250 150 120 450 250 150 135 500 300 270 200 180 300 270 200 175 300 275 200 560 560 450 450 400 225 0.02 0.01 0.03 0.03 0.03 0.04 0.04 0.04 0.03 0.05 0.05 0.05 0.03 0.03 0.06 0.06 0.06 0.03 0.08 0.06 0.04 0.10 0.10 0.08 0.06 0.06 0.06 0.025 27000 0.015 21000 012 24000 0.12 20000 0.12 20000 0.16 21000 0.12 19000 0.12 19000 0.09 19000 0.20 21000 0.20 16000 0.15 16000 0.10 14000 0.10 14000 0.24 14000 0.24 14000 0.18 11000 0.12 11000 0.30 12000 0.24 12000 0.16 9500 200 150 200 140 110 300 200 140 120 300 200 180 150 135 200 170 150 135 250 225 150 450 450 270 270 270 175 0.02 0.01 0.03 0.03 0.03 0.04 0.04 0.04 0.03 0.05 0.05 0.05 0.03 0.03 0.06 0.06 0.06 0.03 0.08 0.06 0.04 0.10 0.10 0.08 0.06 0.06 0.06
R0.25
4 6 4
27000 21000 27000 25000 25000 27000 24000 22000 22000 28000 21000 21000 18000 18000 20000 20000 16000 16000 17000 17000 13000 16500 16500 14000 14000 14000 11000
400 200 400 300 240 600 400 300 270 600 400 360 300 270 600 540 300 270 600 540 300 800 800 630 630 550 360
0.02 0.01 0.03 0.03 0.03 0.04 0.04 0.04 0.03 0.05 0.05 0.05 0.03 0.03 0.06 0.06 0.06 0.03 0.08 0.06 0.04 0.10 0.10 0.08 0.06 0.06 0.06
0.025 27000 0.015 21000 0.12 27000 0.12 25000 0.12 25000 0.16 27000 0.12 24000 0.12 22000 0.09 22000 0.20 28000 0.20 21000 0.15 21000 0.10 18000 0.10 18000 0.24 20000 0.24 20000 0.18 16000 0.12 16000 0.30 17000 0.24 17000 0.16 13000 0.40 16500 0.32 16500 0.30 14000 0.30 14000 0.24 14000 0.16 11000
380 180 380 280 225 550 360 270 250 550 360 320 270 250 540 500 270 230 540 500 275 750 750 600 600 530 330
0.02 0.01 0.03 0.03 0.03 0.04 0.04 0.04 0.03 0.05 0.05 0.05 0.03 0.03 0.06 0.06 0.06 0.03 0.08 0.06 0.04 0.10 0.10 0.08 0.06 0.06 0.06
0.025 27000 0.015 21000 0.12 25000 0.12 20000 0.12 20000 0.16 23000 0.12 21000 0.12 19000 0.09 19000 0.20 25000 0.20 19000 0.15 19000 0.10 17000 0.10 17000 0.24 17000 0.24 17000 0.18 14000 0.12 14000 0.30 15000 0.24 15000 0.16 12000 0.40 16500 0.32 16500 0.30 13000 0.30 13000 0.24 13000 0.16 10000
R0.3
6 8 4
R0.4
6 8 10 4 6
0.2 0.15 0.10 0.10 0.24 0.24 0.18 0.12 0.30 0.24 0.16 0.40 0.32 0.30 0.30 0.24 0.16
R0.5
8 10 12 6
R0.6
8 12 16 8
R0.75
12 16 6 8
0.40 13500 0.32 13500 0.30 10000 0.30 10000 0.24 10000 0.16 8000
R1.0
10 12 16 20
Ap

Ae
249 B
Milling
GM-2BP
Workpiece material

Cast iron, Carbon steel, Alloy Carbon steel, Alloy steel steel ~30HRC 2 ~750N/mm Effective Rotating Feed Feed Diameter length Ap Ae Rotating Ap Ae speed speed speed speed (mm) (min-1) (mm/min) (mm) (mm) (min-1) (mm/min) (mm) (mm) (mm)
8
R1.25
Pre-hardened steel, Quenched Stainless steel and tempered steel ~40HRC Rotating Feed Ap Ae Rotating Feed Ap speed speed speed speed (min-1) (mm/min) (mm) (mm) (min-1) (mm/min) (mm)
560 450 400 225 600 600 540 300 300 600 600 400 400 500 500 0.10 0.06 0.06 0.06 0.20 0.15 0.15 0.15 0.10 0.20 0.20 0.20 0.15 0.25 0.25 0.32 12500 0.30 10000 0.24 10000 0.16 0.40 0.40 0.40 0.40 0.32 0.80 0.60 0.40 0.40 1.0 1.00 7000 7500 7500 7500 6500 6500 6000 6000 5000 5000 5000 4000 450 270 270 175 400 400 360 250 250 400 400 250 250 400 250 0.10 0.06 0.06 0.06 0.20 0.15 0.15 0.15 0.10 0.20 0.20 0.20 0.15 0.25 0.25
Ae (mm) 0.32 0.30 0.24 0.16 0.40 0.40 0.40 0.40 0.32 0.80 0.60 0.40 0.40 1.00 1.00
14000 13000 13000 10000 12000 12000 12000 10000 10000 9000 9000 7000 7000 7000 6000
800 630 550 360 800 800 720 600 600 800 800 600 600 600 500
0.10 0.06 0.06 0.06 0.20 0.15 0.15 0.15 0.10 0.20 0.20 0.20 0.15 0.25 0.25
0.32 14000 0.30 13000 0.24 13000 0.16 10000 0.40 12000 0.40 12000 0.40 12000 0.40 10000 0.32 10000 0.80 0.60 0.40 0.40 1.00 1.00 9000 9000 7000 7000 7000 6000
750 600 530 330 720 720 650 540 540 720 720 540 540 540 450
0.10 0.06 0.06 0.06 0.20 0.15 0.15 0.15 0.10 0.20 0.20 0.20 0.15 0.25 0.25
0.32 14000 0.30 12000 0.24 12000 0.16 0.40 0.40 0.40 0.40 0.32 0.80 0.60 0.40 0.40 0.10 1.00 8000 9500 9500 9500 8500 8500 7500 7500 6000 6000 6500 5000
12 16 20 8 10
R1.5
12 16 20 10
R2.0
16 20 25
R2.5
16 25
Ap

Ae
250 B

Milling
GM-2R
Workpiece material
Diameter (mm)
20000 15000 14000 10800 8200 7000 5200 4200 3500 200 320 545 560 580 600 600 580 580 20000 15000 14000 10800 8200 7000 5200 4200 3500 200 320 545 560 580 600 600 580 580 20000 15000 13000 10000 7600 6400 4800 3800 3200 160 290 510 520 540 550 550 540 540 20000 15000 10600 8000 6400 5300 4000 3200 2650 160 280 420 430 450 460 460 445 445 20000 11150 7500 5500 4500 3700 2800 2200 1850 60 84 120 130 130 140 140 140 140 20000 13000 8500 6500 5000 4200 3200 2500 2100 Ae=0.05D 120 180 330 335 355 360 365 350 350
1 2 3 4 5 6 8 10 12
Ae=0.1D
Ap=1D
Ap=1D

1D<3 3D 0.15D 0.3D
Ae=1D Ap=0.05D
251 B
Milling
Workpiece material
Diameter (mm)

GM-4RGM-4RL
14000 10800 8200 7000 5200 4200 3500 2600 820 840 880 900 890 880 880 680 14000 10800 8200 7000 5200 4200 3500 2600 820 840 880 900 890 880 880 680 13000 10000 7600 6400 4800 3800 3200 2400 755 770 810 830 815 810 810 630 10600 8000 6400 5300 4000 3200 2650 2000 630 640 670 690 680 670 670 525 7500 5500 4500 3700 2800 2200 1850 1400 145 145 145 160 160 160 160 120 8500 6500 5000 4200 3200 2500 2100 1600 Ae=0.05D 490 500 530 540 550 520 520 490
4 5 6 8 10 12 16
Ae=0.1D
Ap=1.5D
Ap=1.5D

1D<3 3D 0.15D 0.3D
Ae=1D Ap=0.05D
252 B

Milling
Stainless steel
Rotating speed (min-1) 2650 2250 2000 1750 1600 1450 1150 1000 800 Ae=0.3D Feed speed(mm/ min) 210 310 240 240 260 260 280 280 260
GM-4Wside milling
Workpiece material
Diameter (mm)

Rotating speed (min-1) 6350 5460 4750 4250 3800 3470 3200 2400 1900
Pre-hardened steel, Carbon steel, Alloy steel Carbon steel, Alloy steel Quenched and tempered steel ~750N/mm2 ~30HRC ~40HRC Feed Rotating Feed Rotating Feed Rotating Feed speed(mm/ speed speed(mm/ speed speed(mm/ speed speed(mm/ -1 -1 -1 min) (min ) min) (min ) min) (min ) min)
760 760 760 760 760 760 770 770 760 5300 4550 4000 3540 3200 2900 2250 2000 1600 Ae=0.4D 640 640 640 640 640 640 650 640 610 4500 3650 3400 2850 2700 2400 1950 1700 1350 360 360 410 410 430 430 470 480 470 3450 3000 2650 2300 2050 1850 1500 1300 1050 280 280 310 310 330 330 360 360 350
6 7 8 9 10 11 12 16 20
Ap=1.5D
Ap=1.5D
253 B
Milling
Workpiece material

GM-4Wslot milling
Cast iron, Nodular cast iron Pre-hardened steel, Carbon steel, Alloy steel Carbon steel, Alloy steel Quenched and tempered steel ~750N/mm2 ~30HRC ~40HRC Stainless steel
80~120 m/min
Rotating speed (min-1) 5300 4500 4000 3500 3200 3000 2650 2000 1600 Feed speed(mm/ min) 640 630 640 630 640 630 640 640 640
70~100m/min
60~90m/min
40~70m/min
30~60m/min
6 7 8 9 10 11 12 16 20
Ae=1D
Ae=1D Ap=0.75D Ap=0.5D
Maximum Ap=12mm
254 B

HM series cutting parameters
Milling
Hardened steel 60~68HRC
Rotating speed (min-1) 32000 16000 11000 8000 6400 5300 4000 3200 2700 2300 2000 1800 1600 Ae=0.02D Feed speed (mm/min) 130 160 175 210 230 255 255 255 270 230 200 180 160
HM-2E
Workpiece material
Diameter (mm)
Pre-hardened steel, Hardened steel 40~50HRC


1 2 3 4 5 6 8 10 12 14 16 18 20
Indexable milling tools Solid carbide end mills HM series cutting parameters
Ap=1.5D
Ap=1D
Ap=1D
Maximum Ae=1.0mm
Maximum Ae=0.5mm
Maximum Ae=0.3mm
1.Please select machine and holder with high precision and rigidity. 2.Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 3.Please use air blow or MQL( minimum oil mist cooling). 4.Down milling is recommended in side milling. 5.Make overhang as short as possible if no interference.
255 B
Milling
HM-2EFP
Workpiece material
Diameter (mm) Rotating speed (min-1) 16000 12000 9600 8000 6000 4800


Feed speed (mm/min) 1155 1155 1155 1200 900 720 Ae=0.05D

Rotating speed (min-1) 8000 6000 4800 4000 3000 2400 Ae=0.03D Feed speed (mm/min) 460 460 460 480 360 285

6 8 10 12 16 20
Ap=1D
Ap=1D
Ap=1D
Maximum Ae=1.0mm
Maximum Ae=0.5mm
Maximum Ae=0.3mm
256 B

Milling
HM-4EHM-4EL
Workpiece material
Diameter (mm)


1 2 3 4 5 6 8 10 12 14 16 18 20
Ap=1.5D
Ap=1D
Ap=1D
Maximum Ae=1.0mm
Maximum Ae=0.5mm
Maximum Ae=0.3mm
257 B
Milling
HM-4EFP
Workpiece material
Diameter (mm) Rotating speed (min-1) 16000 12000 9600 8000 6000 4800


Feed speed (mm/min) 1730 1730 1730 1800 1350 1080 Ae=0.05D


6 8 10 12 16 20
Ap=1D
Ap=1D
Ap=1D
Maximum Ae=1.0mm
Maximum Ae=0.5mm
Maximum Ae=0.3mm
258 B

Milling
HM-6E
Workpiece material
300m/min
Rotating speed (min-1) 16000 12000 9600 8000 6800 6000 5300 4800 Ae=0.05D Feed speed (mm/min) 1850 1850 1850 1920 1600 1440 1270 1150
150m/min
100m/min
6 8 10 12 14 16 18 20
Ap=1.5D
Ap=1.5D
Ap=1.5D
Maximum Ae=1.0mm
Maximum Ae=0.5mm
Maximum Ae=0.3mm
259 B
Milling
HM-6EL
Workpiece material

300m/min
150m/min
Rotating speed (min-1) 8000 6000 4800 4000 3400 3000 2700 2400 Feed speed (mm/min) 650 650 650 670 570 500 450 400 Ae=0.01D
100m/min
Rotating speed (min-1) 5300 4000 3200 2700 2300 2000 1800 1600 Feed speed (mm/min) 430 430 430 460 380 340 300 270
8 10 12 14 16 18 20
Ap=3D
Ap=3D
Maximum Ae=0.3mm
260 B

Milling
Feed speed (mm/min) 50 35 20 100 75 50 30 100 100 75 50 50 30 100 100 75 50 200 150 150 100 75 300 300 200 200 150 100 Ap (mm) 0.009 0.007 0.003 0.011 0.009 0.006 0.004 0.016 0.014 0.01 0.008 0.006 0.004 0.017 0.014 0.01 0.00 0.028 0.021 0.017 0.01 0.005 0.07 0.06 0.05 0.03 0.015 0.008
HM-2EP
Workpiece material

Rotating speed (min-1) 21000 20000 20000 20000 18000 18000 18000 17000 17000 15000 15000 12000 12000 14000 12000 12000 10000 12000 10000 10000 10000 10000 9000 9000 7000 7000 7000 7000 Feed speed (mm/min) 100 75 50 200 150 100 75 400 400 300 250 150 100 400 300 300 200 400 300 300 300 250 400 400 300 300 250 200 Ap (mm) 0.009 0.006 0.002 0.022 0.014 0.01 0.007 0.035 0.03 0.02 0.015 0.01 0.007 0.03 0.03 0.02 0.01 0.06 0.04 0.03 0.025 0.02 0.13 0.11 0.10 0.06 0.04 0.02 Rotating speed (min-1) 17000 1500 1500 14000 14000 14000 14000 12000 12000 10000 10000 10000 10000 10000 10000 10000 10000 8000 7000 7000 7000 7000 6000 6000 6000 6000 6000 6000
0.5
0.8
6 8 10 4 6
1.0
8 10 12 14 6
1.2
8 10 12 6 8
1.5
10 12 14 6 8
2.0
10 12 14 16
261 B
Milling
HM-2EP
Workpiece material
Diameter (mm) Effective length (mm) 8 10 Rotating speed (min-1) 8000 8000 8000 6000 6000 6000 6000 7000 7000 7000 7000 6000 6000 6000 6000 4500 4500 4500 4500 4000 4000


Feed speed (mm/min) 400 400 400 300 300 300 300 400 400 400 400 300 300 300 250 400 400 300 300 400 400 Ap (mm) 0.16 0.14 0.09 0.07 0.05 0.04 0.02 0.18 0.15 0.12 0.10 0.08 0.06 0.05 0.04 0.16 0.14 0.10 0.08 0.19 0.15 Rotating speed (min-1) 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 4000 4000 4000 3000 3000

Feed speed (mm/min) 300 300 300 200 200 150 100 300 300 300 300 200 200 200 150 300 300 300 300 300 300 Ap (mm) 0.08 0.07 0.05 0.03 0.025 0.02 0.01 0.10 0.08 0.06 0.05 0.04 0.03 0.025 0.01 0.08 0.06 0.04 0.03 0.09 0.06
12
2.5
14 16 18 20 6 8 10
3.0
12 14 16 18 20 12
4.0
16 20 25
5.0
16 25
262 B

Milling
Feed speed (mm/min) 120 160 300 380 360 400 400 450 530 500 420 450
HM-2ES
Workpiece material
Diameter (mm)

Rotating speed (min-1) 32000 32000 21000 21000 20000 20000 17000 17000 12000 9000 8000 7000 Feed speed (mm/min) 150 200 400 480 520 560 560 640 800 800 720 640 Rotating speed (min-1) 25000 25000 17000 17000 14000 14000 12000 12000 8000 6000 5000 5000
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0 2.5 3.0
Ae=1D
Ae=1D Ap
Milling slot Tools Cutting diameter depth Ap

D<1 1D3 0.02D 0.05D
Ap
Milling slot Tools Cutting diameter depth Ap

D<1 1D3 0.01D 0.02D
263 B
Milling
Workpiece material
Radius of ball nose (mm)

HM-2BHM-2BLHM-2BFP
Feed Rotating speed speed -1 (min ) (mm/min) 40000 33000 29000 22000 17500 15000 11000 9000 7500 5500 4500 1900 3100 4100 3900 3500 3100 2500 2000 1800 1800 1800 Ap (mm) 0.01 0.02 0.03 0.04 0.05 0.06 0.08 0.1 0.1 0.1 0.1 Ae (mm) 0.05 0.075 0.1 0.15 0.15 0.2 0.25 0.3 0.35 0.4 0.5

Rotating Feed speed speed -1 (min ) (mm/min) 36000 26000 23000 17000 13500 11500 8600 7000 5700 4300 3500 1500 2100 2900 2500 2200 1700 1600 1400 1300 1300 1300 Ap (mm) 0.01 0.02 0.03 0.04 0.05 0.06 0.08 0.1 0.1 0.1 0.1 Ae (mm) 0.05 0.075 0.1 0.15 0.15 0.2 0.25 0.3 0.35 0.4 0.5

Rotating Feed speed speed -1 (min ) (mm/min) 32000 24000 21000 15500 13000 10500 8000 6000 5300 4000 3200 1400 2000 2600 2100 2000 1500 1400 1200 1200 1200 1200 Ap (mm) 0.01 0.02 0.03 0.04 0.05 0.06 0.08 0.1 0.1 0.1 0.1 Ae (mm) 0.05 0.075 0.1 0.15 0.15 0.2 0.25 0.3 0.35 0.4 0.5
R0.5 R1.0 R1.5 R2.0 R2.5 R3.0 R4.0 R5.0 R6.0 R8.0 R10.0
Ap

Ae
1.Please select machine and holder with high precision and rigidity. 2.Above table shows the standard for operations with a low change of machining load, such as Contour machining.Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 3.Please use air blow or MQL( minimum oil mist cooling). 4.When inclination angle is more than 15, please reduce rotating speed and feed speed to 50%~80% of the above conditions. 5.Make overhang as short as possible if no interference.
264 B

Milling
Rotating Feed speed speed -1 (min ) (mm/min) 21100 15800 12700 10600 7950 6350 5300 4000 3200 4240 3520 3200 2500 2250 2000 1900 1900 1900 Ap (mm) 0.03 0.04 0.05 0.06 0.08 0.1 0.1 0.1 0.1 Ae (mm) 0.1 0.15 0.15 0.2 0.25 0.3 0.35 0.4 0.5
HM-4B
Workpiece material
Radius of ball nose (mm)

Feed Rotating speed speed -1 (min ) (mm/min) 29000 22000 17400 14500 10900 8700 7250 5450 4350 6560 6250 5600 5000 4200 3500 3000 3000 3000 Ap (mm) 0.03 0.04 0.05 0.06 0.08 0.1 0.1 0.1 0.1 Ae (mm) 0.1 0.15 0.15 0.2 0.25 0.3 0.35 0.4 0.5

Rotating Feed speed speed -1 (min ) (mm/min) 22800 17100 13600 11400 8550 6850 5700 4280 3425 4560 4000 3520 3000 2500 2200 2000 2000 2000 Ap (mm) 0.03 0.04 0.05 0.06 0.08 0.1 0.1 0.1 0.1 Ae (mm) 0.1 0.15 0.15 0.2 0.25 0.3 0.35 0.4 0.5
R1.5 R2.0 R2.5 R3.0 R4.0 R5.0 R6.0 R8.0 R10.0
Ap

Ae
1.Please select machine and holder with high precision and rigidity. 2.Above table shows the standard for operations with a low change of machining load, such as Contour machining.Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 3.Please use air blow or MQL( minimum oil mist cooling). 4.When inclination angle is more than 15, please reduce rotating speed and feed speed to 50%~80% of the above conditions. 5.Make overhang as short as possible if no interference.
265 B
Milling
HM-2BS
Workpiece material
Diameter (mm)


Rotating speed (min-1) 25000 25000 25000 25000 25000 24000 21000 19000 9500 6400 Feed speed (mm/min) 135 140 150 175 190 210 210 210 210 210 Rotating speed (min-1) 25000 25000 25000 24000 24000 18000 15000 14000 7200 4800

Feed speed (mm/min) 115 120 130 150 150 140 140 140 140 140
R0.15 R0.2 R0.25 R0.3 R0.35 R0.4 R0.45 R0.5 R1.0 R1.5

Ae=0.1R
Ap=0.05R
266 B

Milling
Ap (mm) 0.01 0.005 0.02 0.01 0.01 0.03 0.02 0.02 0.01 0.05 0.05 0.03 0.01 0.01 0.06 0.06 0.03 0.02 0.08 0.06 0.01 0.10 0.10 0.08 0.06 0.02 0.01 Ae (mm) 0.01 0.005 0.04 0.02 0.02 0.08 0.04 0.04 0.02 0.10 0.10 0.05 0.03 0.03 0.12 0.12 0.06 0.03 0.15 0.15 0.03 0.20 0.16 0.16 0.16 0.10 0.05
HM-2BP
Workpiece material
Diameter (mm)

Feed speed (mm/min) 200 150 200 150 120 300 200 150 135 300 200 180 150 135 200 180 150 135 250 225 150 400 400 275 275 250 175 Ap (mm) 0.01 0.005 0.03 0.02 0.02 0.04 0.02 0.02 0.02 0.05 0.05 0.03 0.01 0.01 0.06 0.06 0.04 0.02 0.08 0.06 0.01 0.10 0.10 0.08 0.06 0.02 0.02 Ae (mm) 0.01 0.01 0.06 0.03 0.03 0.08 0.04 0.04 0.03 0.10 0.10 0.05 0.03 0.03 0.12 0.12 0.06 0.04 0.15 0.15 0.05 0.20 0.16 0.16 0.16 0.10 0.05 Rotating speed (min-1) 27000 20000 17000 17000 17000 14500 12000 12000 12000 14500 11500 11500 9800 9800 9500 9500 7500 7500 8000 8000 6500 7500 7500 5500 5500 5500 5500
Effective speed length Rotating -1 (min ) (mm) 4 6 4 27000 20000 24000 20000 20000 21000 19000 17000 17000 21000 16000 16000 14000 14000 14000 14000 11000 11000 12000 12000 9500 13500 13500 10000 10000 10000 8000
Feed speed (mm/min) 100 75 150 150 120 200 150 100 75 200 150 135 100 75 175 150 100 75 200 175 100 225 225 175 175 150 125
R0.25
R0.3
6 8 4
R0.4
6 8 10 4 6
R0.5
8 10 12 6
R0.6
8 12 16 8
R0.75
12 16 6 8
R1.0
10 12 16 20
Ap

Ae
267 B
Milling
HM-2BP
Workpiece material
Diameter (mm) Effective speed length Rotating -1 (min ) (mm) 8 12500 9000 9000 5500 7500 7500 7500 6500 6500 6000 6000 5000 5000 5000 4000 12 16 20 8 10


Feed speed (mm/min) 400 275 250 175 400 400 360 250 250 400 400 250 250 400 250 Ap (mm) 0.10 0.06 0.02 0.02 0.15 0.10 0.10 0.05 0.02 0.20 0.10 0.10 0.10 0.25 0.25 Ae (mm) 0.16 0.16 0.10 0.05 0.30 0.30 0.30 0.20 0.10 0.40 0.32 0.20 0.20 0.50 0.50 Rotating speed (min-1) 7000 5000 5000 5000 4000 4000 4000 3000 3000 3000 3000 2500 2500 3000 3000

Feed speed (mm/min) 225 175 150 125 200 200 180 150 150 200 200 100 100 200 100 Ap (mm) 0.10 0.06 0.02 0.01 0.15 0.10 0.10 0.05 0.02 0.20 0.20 0.10 0.10 0.2 0.20 Ae (mm) 0.16 0.16 0.10 0.05 0.30 0.30 0.30 0.20 0.05 0.40 0.20 0.20 0.10 0.2 0.2
R1.25
R1.5
12 16 20 10
R2.0
16 20 25
R2.5
16 25
Ap

Ae
268 B

Milling
HM-4RHM-4RPHM-4RF
Workpiece material
300m/min
150m/min
100m/min
3 4 5 6 8 10 12 16
Ap=1D
Ap=1D
Ap=1D
Maximum Ae=1.0mm
Maximum Ae=0.5mm
Maximum Ae=0.3mm
269 B
Milling
NM-2E
Workpiece material
Diameter (mm)

NM series cutting parameters
Copper, Copper alloy

Rotating speed (min-1) 40000 30000 20000 15000 12000 10000 8000 6500 5500 Ae=0.1D Feed speed (mm/min) 1800 2500 2300 2000 1500 1400 1000 900 850
1 2 3 4 5 6 8 10 12
Indexable milling tools Solid carbide end mills NM series cutting parameters
Ae=1D
Ap=1D Ap=0.1D
Maximum Ae=1.0mm
Maximum Ap=1.0mm
1.The above table shows the reference value of side milling. The feed speed in slot milling is recommended 70% of reference value stated above. 2.Please select high rigid and precise machine and tool holder. Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 3.It is possible to increase the rotating speed and feed speed correspondingly if the cutting depth is small. 4.Please use water-soluble cutting liquid. 5.Down milling is recommended in side milling. 6.Make overhang as short as possible if no interference.
270 B

Milling
Feed speed (mm/min) 250 300 400 400 450 450 450
NM-4E
Workpiece material
Diameter (mm) Rotating speed (min-1) 10600 8000 6500 5300 4000 3500 3000 Ae=0.05D
3 4 5 6 8 10 12
Ap=2.5D
Maximum Ap=0.5mm
1.Please select high rigid and precise machine and tool holder. Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 2.It is possible to increase the rotating speed and feed speed correspondingly if the cutting depth is small. 3.Please use water-soluble cutting liquid. 4.Down milling is recommended in side milling. 5.Make overhang as short as possible if no interference.
271 B
Milling
NM-2EP
Workpiece material


Rotating speed (min-1) 40000 40000 40000 40000 40000 40000 40000 40000 40000 40000 30000 30000 30000 40000 20000 40000 40000 40000 30000 30000 30000 40000 20000 20000 20000 15000 15000 12000 12000 Feed speed (mm/min) 800 700 500 1000 1000 800 600 1800 1500 1500 1000 800 600 2000 1000 2400 2200 2000 1500 1200 1000 2500 1000 2500 2000 1800 1200 2000 1500 Ap (mm) 0.004 0.002 0.001 0.02 0.015 0.01 0.005 0.04 0.04 0.03 0.02 0.015 0.01 0.09 0.03 0.18 0.15 0.12 0.10 0.08 0.06 0.15 0.08 0.20 0.12 0.25 0.15 0.40 0.35
0.5
0.8
6 8 10 4 6
1.0
8 10 12 14
1.5
8 16 6 8
2.0
10 12 14 16
2.5 3.0 4.0 5.0
10 20 10 20 16 25 16 25
1.Please select high precise machine and tool holder. 2.Please use water-soluble cutting liquid. 3.Make overhang as short as possible if no interference. 4.Reduce feed speed correspondingly when rotating speed is low.
272 B

Milling
Feed speed (mm/min) 900 800 870 800 850 850 900 900 1200 1500 1300 1200
NM-2B
Workpiece material
Diameter (mm) Rotating speed (min-1) 40000 32000 24000 19000 16000 14000 12000 9600 8000 7000 4800 4000
R0.5 R0.75 R1.0 R1.25 R1.5 R1.75 R2.0 R2.5 R3.0 R4.0 R5.0 R6.0

Ae=0.2R
Ap=0.1R
1.Please select high rigid and precise machine and tool holder. Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 2.It is possible to increase the rotating speed and feed speed correspondingly if the cutting depth is small. 3.Please use water-soluble cutting liquid. 4.Make overhang as short as possible if no interference.
273 B
Milling
NM-2BP
Workpiece material
Diameter (mm) Effective length (mm) 4 6 4


Rotating speed (min-1) 40000 36000 40000 40000 30000 40000 40000 40000 30000 40000 40000 40000 33000 35000 40000 20000 40000 40000 40000 40000 30000 20000 40000 32000 32000 32000 32000 20000 25000 20000 Feed speed (mm/min) 750 500 900 750 400 1050 800 500 400 1050 800 500 400 300 900 400 1100 900 750 500 400 300 1100 600 1100 900 600 400 1250 900 Ap (mm) 0.01 0.008 0.012 0.010 0.008 0.016 0.012 0.01 0.008 0.02 0.016 0.014 0.012 0.010 0.03 0.015 0.04 0.034 0.028 0.022 0.018 0.012 0.06 0.03 0.08 0.06 0.04 0.02 0.10 0.06 Ae (mm) 0.025 0.02 0.03 0.02 0.01 0.04 0.03 0.02 0.01 0.05 0.04 0.03 0.02 0.010 0.075 0.04 0.10 0.08 0.065 0.05 0.04 0.03 0.15 0.08 0.20 0.16 0.12 0.08 0.25 0.12
R0.25
R0.3
6 8 4
R0.4
6 8 10 4 6
R0.5
8 10 12
R0.75
8 16 6 8
R1.0
10 12 16 20
R1.5
10 20 10
R2.0
16 20 25
R2.5
16 25
Ap

Ae
1.Please select high precise machine and tool holder. 2.Please use water-soluble cutting liquid. 3.Make overhang as short as possible if no interference. 4.Reduce feed speed correspondingly when rotating speed is low.
274 B

AL series cutting parameters
Milling
Feed speed (mm/min) 500 750 1100 1250 1100 1000 1100 1250 1300 1350 1350 1350 1350
AL-2EAL-2EL
Workpiece material
Diameter (mm) Rotating speed (min-1) 40000 40000 26500 20000 16000 13000 10000 8000 6600 5700 5000 4400 4000 Ae=0.1D Ae=1D
Aluminum alloy
Feed speed (mm/min) 650 950 1500 1600 1500 1250 1400 1600 1650 1700 1700 1700 1700
Silicon aluminium alloySi10%

Rotating speed (min-1) 40000 32000 21000 16000 13000 10600 8000 6500 5300 4600 4000 3500 3200
1 2 3 4 5 6 8 10 12 14 16 18 20
Indexable milling tools Solid carbide end mills AL series cutting parameters
Ap=1.5D
Ap=0.5D
275 B
Milling
AL-3E
Workpiece material
Diameter (mm)

Aluminum alloy

Rotating speed (min-1) 40000 32000 21000 16000 13000 10600 8000 6500 5300 4600 4000 3500 3200 Feed speed (mm/min) 600 900 1300 1500 1300 1200 1300 1500 1550 1600 1600 1600 1600
1 2 3 4 5 6 8 10 12 14 16 18 20
Ae=1D
Ap=1.5D
Ap=0.5D
276 B

Milling
Feed speed (mm/min) 1600 1550 1550 1550 1600 2000 1750 1650
AL-2B
Workpiece material
Diameter (mm) Rotating speed (min-1) 40000 26500 20000 16000 13000 10000 8000 6600
Aluminum alloy
Feed speed (mm/min) 2000 1950 1950 1950 2000 2450 2200 2050

Rotating speed (min-1) 32000 21000 16000 13000 10600 8000 6500 5300
R1.0 R1.5 R2.0 R2.5 R3.0 R4.0 R5.0 R6.0

Ae=0.2R
Ap=0.1R
1.Please select high rigid and precise machine and tool holder. Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 2.It is possible to increase the rotating speed and feed speed correspondingly if the cutting depth is small. 3.Please use water-soluble cutting liquid. 4.Make overhang as short as possible if no interference.
277 B
Milling
AL-3W
Workpiece material

Aluminum alloy
250m/min
Rotating speed (min-1) 13000 10000 8000 6600 5700 5000 4400 4000 Ae=0.25D Ae=1D Feed speed (mm/min) 3000 3000 2900 2700 2600 2550 2500 2400 Rotating speed (min-1) 10600 8000 6500 5300 4600 4000 3500 3200
200m/min
Feed speed (mm/min) 1900 1900 1850 1700 1650 1600 1550 1500
8 10 12 14 16 18 20
Ap=1.5D
Ap=1D
1.The above table shows the reference value of side milling. When milling slot, rotating speed is around 70% of standard value, feed speed is around 50% of
standard value. 2.Please select high rigid and precise machine and tool holder. Vibration and unusual voice may be generated if the machine rigidity and workpiece fixture stability is low, please reduce the rotating speed and feed speed stated above correspondingly. 3.It is possible to increase the rotating speed and feed speed correspondingly if the cutting depth is small. 4.Please use water-soluble cutting liquid. 5.Down milling is recommended in side milling. 6.Make overhang as short as possible if no interference.
278 B

Milling
500~800m/min
AL-2R-AIR
Workpiece material
Cutting speed Diameter (mm) Rotating speed (min-1) 35000 26000 21000 18000 15000 12000
Aluminum alloy
500~800m/min
Feed speed (mm/min) 3500 3800 4000 4300 4800 5500 Ae=0.5D Rotating speed (min-1) 35000 26000 21000 18000 15000 12000
Feed speed (mm/min) 3500 3800 4000 4300 4800 5500
6 8 10 12 16 20
Ap=1D
1.The cutting parameters above are applied for high speed machining Al alloy. 2.Please use cutting liquid or strong air blow to remove chips. 3.Sparks generated during machining process or heat caused by tool breakage may cause burning or fire, Please be careful of fireproof. 4.Dynamic balance test must be done before machining
279 B
Milling
Workpiece material

AL-2RL-AIR
Aluminum alloy Silicon aluminium alloySi10%
500~800m/min
Rotating speed (min-1) 30000 24000 20000 16000 12000 10000 Feed speed (mm/min) 3000 3200 3500 3800 4000 4600 Ae=0.5D Rotating speed (min-1) 30000 24000 20000 16000 12000 10000
500~800m/min
Feed speed (mm/min) 3000 3200 3500 3800 4000 4600
8 10 12 16 20
Ap=1D
280 B

Milling
800~1200m/min
AL-3R-AIR
Workpiece material
Cutting speed Diameter (mm) Rotating speed (min-1) 25000 20000 15000
Aluminum alloy
800~1200m/min
Feed speed (mm/min) 6000 6400 7000 Ae=0.6D Ap=0.6D Rotating speed (min-1) 25000 20000 15000
Feed speed (mm/min) 6000 6400 7000
12 16 20
281 B
Milling
Workpiece material

AL-3RL-AIR
Aluminum alloy Silicon aluminium alloySi10%
800~1200m/min
Rotating speed (min-1) 22000 18000 13000 Feed speed (mm/min) 5300 5700 6000 Rotating speed (min-1) 22000 18000 13000
800~1200m/min
Feed speed (mm/min) 5300 5700 6000
12
16 20
Ae=0.6D Ap=0.6D
282 B

SM series cutting parameters
Milling
Heat resistant alloyTitanium alloy
Rotating speed (min-1) 3150 2350 1900 1900 1400 1100 950 720 570 Ae=0.05D Feed speed (mm/min) 55 70 70 90 100 100 85 70 70
SM-3E
Workpiece material
Diameter (mm)
carbon steelAlloy steel

Rotating speed (min-1) 8500 6400 5800 5300 3900 3100 2600 1900 1500 Feed speed (mm/min) 660 690 710 750 700 640 600 520 445 Ae=0.2D
Stainless steel
Rotating speed (min-1) 4400 3700 3000 2700 2000 1600 1300 1000 800 Feed speed (mm/min) 100 160 190 200 210 210 170 130 140
3 4 5 6 8 10 12 16 20
Ap=1.5D
Ap=1D

Ae=1D Ap=0.3D Ae=1D Ap=0.05D
1.The above table shows the standard value of side milling. When milling slot, rotating speed is around 80%~100% of standard value, feed speed is around 60%~80% of standard value. 2.Recommend using non water-soluble cutting liquid when machining stainless steel and heat resistant alloy. 3.Please select high rigid and precise machine and tool holder. 4.Adjust rotating speed and feed speed according to cutting depth and machine rigidity. 5.Down milling is recommended in side milling. 6.Make overhang as short as possible if no interference.
283 B
Milling
SM-4R
Workpiece material
Diameter (mm) 6 8 Rotating speed (min-1) 5300 3900 3100 2600

Carbon steelAlloy steel

Feed speed (mm/min) 750 700 640 600 Ae=0.2D
Stainless steel
Rotating speed (min-1) 2700 2000 1600 1300 Feed speed (mm/min) 200 210 210 170
Heat resistant alloyTitanium alloy

Rotating speed (min-1) 1900 1400 1100 950 Ae=0.05D Feed speed (mm/min) 90 100 100 85
10 12
Indexable milling tools Solid carbide end mills SM series cutting parameters
Ap=1.5D
Ap=1D

Ae=1D Ap=0.3D Ae=1D Ap=0.05D
1.The above table shows the standard value of side milling. When milling slot, rotating speed is around 80%~100% of standard value, feed speed is around 60%~80% of standard value. 2.Recommend using water-insoluble cutting liquid when machining stainless steel and heat resistant alloy. 3.Please select high rigid and precise machine and tool holder. 4.Adjust rotating speed and feed speed according to cutting depth and machine rigidity. 5.Down milling is recommended in side milling. 6.Make overhang as short as possible if no interference.
284 B

Milling
Parts terminology of end mill
Cutting edge diameter
Shank diameter
Chip pocket
Neck
Shank
Land width Relief land width
Radial primary relief angle Radial secondary relief angle Radial rake angle
Length of cutting edge Overall length
Corner Lead angle
Peripheral cutting edge
Axial rake angle Axial primary relief angle Axial secondary relief angle Web thickness
Solid carbide end mills Technical information
Number of teeth, chip pocket and tool rigidity

Number of teeth
2 Flutes
3 Flutes
4 Flutes
Profile of cross section
Proportion of cross section Advantages Features Defect

54% Large chip pocket Easy to chip removal

56% Easy to chip removal Perfect surface finish

60% Good rigidity Perfect surface finish
Low rigidity 1. Slot machining 2. Side face machining 3. Hole machining
Difficult to measure external diameter 1. Slot machining 2. Side face machining 3. Heavy cutting 4. For finishing
Chip removal is not smooth 1.Shallow slot machining 2.Side face machining 3.For finishing
Functions
285 B
Milling

Length of cutting edge (overhang) and cutting diameter

l
The shorter of overhang is, the stronger the rigidity is. Thus it is not easy to generate bend and vibration in the cutting process, and improve the machining precision. Length of cut (overhang) increases by 1 time, the Deection
degree (f) will be 8 times of the former one
f
F.l3 F . l 3. 6 4 f= = 3.E.I 3 . E . d 4.
Reduce the overhang by 20%, the Deflection degree (f) will decrease by 50% Increase the diameter by 20%, the Deflection degree (f) will decrease by 50%
Indexable milling tools Solid carbide end mills Technical information
Typical geometries of end mills

Type Flattened end mill Geometry
R end mill
Ball nose end mill
Corrugated edge end mill
Tapered end mill
286 B

Milling
Feed rate selecting table in profile machining for ball nose and R end mills
Ry=R{1-cos[arc sin(fr/2R)]}
RyTheoretical value of surface roughness
P
PFeed rate RBall nose radius or corner radius
Ry
0.1 0.2 0.010 0.005 0.003 0.003 0.002 0.001 0.001 0.001 0.3 0.023 0.011 0.008 0.006 0.005 0.004 0.003 0.002 0.002 0.001 0.001 0.001 0.4 0.042 0.020 0.013 0.010 0.008 0.007 0.005 0.004 0.003 0.003 0.002 0.002
Feed rate P
0.5 0.067 0.032 0.021 0.015 0.013 0.010 0.008 0.006 0.005 0.004 0.003 0.003 0.6 0.100 0.046 0.030 0.023 0.018 0.015 0.011 0.009 0.008 0.006 0.005 0.004 0.063 0.041 0.031 0.025 0.020 0.015 0.012 0.010 0.008 0.006 0.005 0.083 0.054 0.040 0.032 0.027 0.020 0.016 0.013 0.010 0.008 0.006 0.107 0.069 0.051 0.041 0.034 0.025 0.020 0.017 0.013 0.010 0.008 0.086 0.064 0.051 0.042 0.031 0.025 0.021 0.016 0.013 0.010 0.7 0.8 0.9 1.0 0.003 0.001 0.001 0.001 0.001
0.5 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.5
Ry
1.1 1.2 1.3 1.4
Feed rate P
1.5 1.6 1.7 1.8 1.9 2.0
0.5 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.5
0.104 0.077 0.061 0.051 0.038 0.030 0.025 0.019 0.015 0.012 0.092 0.073 0.061 0.045 0.036 0.030 0.023 0.018 0.014 0.109 0.086 0.071 0.053 0.042 0.035 0.026 0.021 0.017 0.100 0.083 0.062 0.049 0.041 0.031 0.025 0.020 0.095 0.071 0.057 0.047 0.035 0.028 0.023 0.109 0.081 0.064 0.054 0.040 0.032 0.026 0.091 0.073 0.061 0.045 0.036 0.029 0.103 0.082 0.068 0.051 0.041 0.032 0.091 0.076 0.057 0.045 0.036 0.101 0.084 0.063 0.050 0.040
287 B
Milling
Solutions

Common problems and solutions for end mill

Tool material
Select coated end mill Cutting speed Feed rate
Cutting condition
Cutting liquid Increase the amount of cutting liquid Water-insoluble cutting liquid Dry or wet machining Cutting depth Cutting direction ( down / up milling )
Tool shape
Helical angle Number of tooth Milling diameter
Machine clamping
Reduce the overhang length Improve tool clamping precision Change collet Increase clamping force Improve workpiece clamping rigidity
Common problems
Tool fracture
Fracture of end mill Rapid wear of cutting edge

up
down
Indexable milling tools Solid carbide end mills Technical information
dry
Damage of cutting edge
Breakage Severe chips bond Poor surface quality Uneven
down
wet wet
Machining precision
Uneven side face of workpiece Burrs, breakage and slice frittering Large vibration
Chip control
Unsmooth chip removal
Others
1.Large abrasion of cutting edge is easy to cause fracture of end mill or poor surface quality, it is recommended to regrind the end mills. 2.Make overhang of tool as shorter as possible.
288 B
Non-standard tailor made based on standard
Milling
Customer name: Fax Tel E-MAIL: Huanghe Southern Road, Tianyuan Zone, Zhuzhou, Hunan province, China. Fax0733-2882721 2885420 2887878 Postcode412007 E-mail:zccct@zccct.com
If the dimensions on the catalogue cant meet your requirements, we will supply special and accurate non-standard order, you just need to easily select the product you want.
Selecting tool series

GM series HM series NM series AL series SM series Diameter 0.320.0mm range Number of tooth
Flattened Ball nose Radius
Selecting tool type
Non-standard tailor made based on standard
d1= Tol: l2= l1=
d2=
Helical angle=
Note:
Order quantity: Quotation by ZCCCT
pc
Delivery date(Y/M/D): Confirmed by customer: Date:(Y/M/D):
289 B
Milling
customer name: Fax Tel E-MAIL:

Special for non-standard tailor made
Huanghe Southern Road, Tianyuan Zone, Zhuzhou, Hunan province, China. Fax0733-2882721 2885420 2887878 Postcode412007 E-mail:zccct@zccct.com
Workpiece material information

Carbon steel Alloy steel Pre-hardened Steel Hardened steel Stainless steel Grey cast iron Nodular cast iron Copper alloy Aluminum alloy Titanium alloy Heat resistant alloy
Grade of workpiece material
Tensile strength Hardness=
N/mm2
unit HRC,HB etc
Diameter 0.225.0mm range Number of tooth Cutting edge Yes No Over centre
DIN6535
d2=
Indexable milling tools Solid carbide end mills Special for non-standard tailor made
Tool information Selecting tool type Shank type
Form HA
Sharp flattened
Chamfering
Ball nose
Radius
Form HB
d1= Tol:
Common straight shank Special shape
l2= l1=
Helical angle=
Coated
Yes No
Machining style
Slot milling
Side milling
Profile milling
Note:
Order quantity: Quotation by ZCCCT
pc
Delivery date(Y/M/D): Confirmed by customer: Date:(Y/M/D):
290 B

Fresa Men To

Uploaded by

Copyright:

Available Formats

Fresa Men To

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fresa Men To

Uploaded by

Copyright:

Available Formats

1 B

Solid Carbide End Mills

product series Define your type of milling operation Approach angle

Applicable machining operations

Inserts specification Workpiece materials

The insert shape, type, dimension, grade, stock ect.

Structure and coupling size

Good working condition

Normal working condition

Bad working condition

SEET12T3-EM SEET12T3-DR SEET12T3-CR

-050-A22-SE12-04 -063-A22-SE12-05 -080-A27-SE12-06 -100-B32-SE12-07 -125-B40-SE12-08 -160-B40-SE12-10 -200-C60-SE12-12 -250-C60-SE12-14 -315-D60-SE12-18

Produce according to order

Screw for clamp inserts

Screw for clamp shim

Recommended grade and always stock available

Recommended grade and produce according to order

Available grade and always stock available

Chipbreaker selection for FMA01 milling inserts

Applicable tool D14-D18

Tools code key B20-B21

Grade selection guide B15-B19

Technical data B164-B170

Assembly of tools and spare parts

The tool type, dimension, stock etc.

Insert shape and size Insert shape

Good working condition

Normal working condition

Bad working condition

Non-ferrous metal Heat resistant alloy, Ti alloy

Basic dimensions(mm) Insert shape Type L

Recommended grade and produce according to order

Recommended grade and always stock available

Available grade and always stock available

Stock condition Insert dimension Insert type

Indexable milling tool family

Indexable Milling Tools

Approach angle / Max. cutting depth.

SEET12T3-CF/CM/CR SEET12T3-EF/EM SEET12T3-LH/W

Kr=45 apmax=5.5 Kr=45

SEN1203AF SER1203AF SEN1504AF SER1504AF

Indexable milling tools

Face milling steel, alloy steel, cast iron, aluminum alloy

Kr=45 apmax =5.0

Face milling steel, alloy steel and cast iron

Kr=45 apmax=5.0 Kr=45

Face milling cast iron

Heavy-duty face milling steel and alloy steel

Face milling cast iron

SPKW1204EDFR SPKW1204EDSR SPKT1204EDR

Face milling steel, alloy steel and cast iron

Indexable Milling Tools

Approach angle / Max. cutting depth.

General face milling steel, alloy steel and cast iron

TPN2204PD TPKN2204PDF TPKN2204PDT

Face milling steel, alloy steel and cast iron

Indexable milling tools Indexable milling tools overview

apmax=6.0 apmax=8.0 apmax=10.0 apmax=4.0 apmax=5.0 apmax=6.0 apmax=6.0 apmax=8.0 apmax=10.0

RCKT1606MO-DM/DR RCKT2006MO-DR RDKW0803MO

Cavity profile milling