DAE Annual Exam Date Sheet 2013 (Theory - Final)

KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
1st Year
THEORY
DATE SHEET
FOR DIPLOMA OF ASSOCIATE ENGINEER NEW COURSE ANNUAL EXAMINATION 2013 THEORY PAPERS
Time: Morning = 9:00 AM to 12:00 PM
Date, Day & Time Auto & Diesel Technology Auto & Farm Technology Civil Technology Chemical Technology
Evening = 2:00 PM to 5:00 PM

Electrical Technology Mechanical Technology Electronics Technology
(Friday Evening 2:30 PM to 5:30 PM)

Telecommunication Technology Computer Hardware Technology Architechture Technology Bio-Medical Technology Refrigeration & Air Cond: Technology
15.05.201 3 Wednesda y Morning 16.05.201 3 Thursday Evening 18.05.201 3 Saturday Morning 21.05.201 3 Tuesday Morning 22.05.201 3 Wednesda y Evening 24.05.201 3 Friday Morning 27.05.201 3 Monday Morning
GEN-111 Islamyat / Pak. Study
GEN-111 Islamyat / Pak. Study ET-115 Principles of Electrical Engr: (Paper-A) MATH-123 Applied Mathematics-I (Paper-A)
PHY-122 Applied Physics MATH-113 Applied Mathematics-I (Paper-A)
PHY-122 Applied Physics MATH-113 Applied (Paper-A)
PHY-122 Applied Physics MATH-123 Applied (Paper-A)
Mathematics-I
Mathematics-I
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
GEN-112 English
MATH-113 Applied Mathematics-I (Paper B)
MATH-113 Applied MathematicsI (Paper B)
MATH-113 Applied Mathematics-I (Paper B) CHT-153 Basic Chemical Engg:- I
MATH-123 Applied MathematicsI (Paper B) ELT-114 Electrical Essentials & Network (Paper-A) ELT-114 Electrical Essentials & Network (Paper-B)
MATH-123 Applied Mathematics-I (Paper B) TC-114 Electrical Essentials & Network (Paper-A) TC-114 Electrical Essentials & Network (Paper-B)
MATH-123 Applied Mathematics-I (Paper B) COMP-114 Electrical Essentials & Network (Paper-A) COMP-114 Electrical Essentials & Network (Paper-B)
MATH-123 Applied Mathematics-I (Paper B) ELT/BM-114 Electrical Essentials & Network (Paper-A) ELT/BM-114 Electrical Essentials & Network (Paper-B)
MT-164 Workshop Practice I
MT-164 Workshop Practice I
CT-114 Surveying - I
ET-146 Workshop Practice I ET-115 Principles of Electrical Engr: (Paper-B)
MT-116 Workshop Practice I MT-131 Safety Practice and Procedures
AR-154 Surveying and Levelling AR-112 Building Material and Fabrication
ET-113 Applied Electricity
AD-123 I.C. Engines
AD-123 I.C. Engines
CT-133 Civil Drafting
-----
RACT-113 Principal of Refrigeration
(Continued on Page 2)
1st Year New Course Theory Papers ( ANNUAL 2013 )

Date, Day & Time Auto & Diesel Technology Auto & Farm Technology Civil Technology Chemical Technology Electrical Technology Mechanical Technology Electronics Technology Telecommunication Technology Computer Hardware Technology Architechture Technology AR-132 Basic Computer in Architecture AR-123 Architectural Drawing and Drafting Bio-Medical Technology Refrigeration & Air Cond: Technology
28.05.201 3 Tuesday Evening 30.05.201 3 Thursday Morning 31.05.201 3 Friday Evening 03.06.201 3 Monday Morning
MT-153 Engineering Drawing AD-113 Automotive Electric and Electronics
MT-153 Engineering Drawing AD-113 Automotive Electric and Electronics
CH-112 Applied Chemistry
CHT-164 General Chemistry
CH-112 Applied Chemistry MT-143 Basic Engineering and CAD - I
-----
-----
CH-112 Applied Chemistry BM-112 Fundamental of Biomedical Equipment and interfaces
CT-123 Construction I
MT-143 Drawing and CAD - I
-----
-----
-----
-----
-----
*COMP122 Computer Applications
*COMP-122
Computer Applications
-----
*COMP-122 *COMP-122 *COMP-122

Computer Applications Computer Applications Computer Applications
*COMP-123
--------Electronic Devices and Circuit I (Paper A) Electronic Devices and Circuit I (Paper B) -----
*COMP-122 *COMP-122
Computer Applications Computer Applications
*COMP-123
---------------------------------------------
Note: -
1. The candidates are not allowed to bring mobile phone in the Exam Hall. The UMC will be registered against the defaulter. 2. During the paper of Technical Drawing/Engineering Drawing/Drafting, the candidates must bring their own drawing board with them.
( Jamal Akbar ) Controller of Examinations
2nd Year
THEORY
DATE SHEET
FOR DIPLOMA OF ASSOCIATE ENGINEER ANNUAL EXAMINATION 2013 NEW COURSE THEORY PAPERS


15.05.201 3 Wednesda y Evening 17.05.201 3 Friday Morning 20.05.201 3 Monday Morning 21.05.201 3 Tuesday Evening 23.05.201 3 Thursday Morning 24.05.201 3 Friday Evening 27.05.201 3 Monday Evening
GEN-211 Islamiyat / Pak. Study
GEN-211 Islamiyat / Pak. Study COMP-214 Computer Organization & Basic Programming COMP-223 Electronic Devices and Circuits II COMP-232 Motor and Power Supplies COMP-243 Digital Electronics & Microprocessor COMP-253 Measuring Instruments MATH-233 Applied Mathematics II (Paper A)
PHY-212 Applied Mechanics
PHY-212 Applied Mechanics
CT-262 Quantity Surveying I CT-212 Public Health Engineering I CT-243 Civil Drafting II
CHT-244 Organic Chemistry CHT-254 Industrial Chemical Process I (Paper - A) CHT-263 Quantitative Analysis
PHY-222 Applied Physics
PHY-212 Applied Mechanics ET-202 Applied Electricity & Electronics
ELT-222 Motor and Generators
TC-262 Power Plant
AR-212 Environmental Studies AR-214 Structural Mechanics RCC Design (Paper - A) AR-224 Architecture Design and Drawing - I
BM-214 Solid State Electronics
PHY-212 Applied Mechanics RACT-214 Principal of Air-Cond: (Paper - A) RACT-243 Advance Refrigeration (Paper - A) RACT-223 Applied Thermodyn: & Low Pressure Boiler RACT-214 Principal of Air-Cond: (Paper - B) MATH-223 Applied Mathematics II (Paper A)
ET-213 D.C. Machines and Batteries ET-223 Electrical Inst: and Measurement ET-233 Utilization of Electrical Energy ET-242 Installation Planning and Estimating MATH-233 Applied Mathematics II (Paper A)
CH-213 Applied Chemistry ELT-264 Amplifiers & Radio Receivers MGM-211 Business Communic:
CH-222 Applied Chemistry TC-222 Digital Circuits and Microprocessor
BM-222 Digital Electronics BM-223 X-Ray & Film Processing Equipment MGM-211 Business Communic:
AD-212 Applied Thermodyn: AD-223 Suspension Steering and Brakes AD-243 Problem in I.C. Engine MATH-212 Applied Mathematics II
AD-212 Applied Thermodyn: AD-223 Suspension Steering and Brakes AF-213 Farm Machinery II MATH-212 Applied Mathematics II
MT-242 Metallurgy
CT-224 Surveying II
MGM-211 Business Communic: CHT-271 Safety Practice and Procedure MATH-223 Applied Mathematics II (Paper A)
MGM-211 Business Communic:
AR-233 Auto CAD I
CT-233 Construction II MATH-212 Applied Mathematics II
MT-223 Engineering Drawing II MATH-212 Applied Mathematics II
ELT-233 Measuring Instruments MATH-233 Applied Mathematics II (Paper A)
TC-233 Measuring Instruments MATH-233 Applied Mathematics II (Paper A)
AR-262 History of Architecture MATH-212 Applied Mathematics II
ELT-233 Measuring Instruments MATH-233 Applied Mathematics II (Paper A)
2nd Year New Course Theory Papers( ANNUAL EXAMINATION 2013

Date, Day & Time Auto & Diesel Technology Auto & Farm Technology Civil Technology Chemical Technology Electrical Technology Mechanical Technology Electronics Technology Telecommunication Technology TC-242 Radio Communic: System I MATH-233 Applied Mathematic II (Paper B)
Computer Hardware Technology
Architechture Technology
Bio-Medical Technology
Refrigeration & Air Cond: Technology
29.05.201 3 Wednesda y Morning 30.05.201 3 Thursday Evening 31.05.201 3 Friday Evening 03.06.201 3 Monday Morning 04.06.201 3 Tuesday Morning 05.06.201 3 Wednesda y Morning
AD-234 Workshop Practice II
AD-234 Workshop Practice II
CT-253 Mechanics of Structure
CHT-283 Physical Chemistry
ET-263 Basic Electronics
MT-212 Metrology
ELT-252 Communic: System I MATH-233 Applied Mathematic II (Paper B)
COMP-262 Control & Automation MATH-233 Applied Mathematic II (Paper B)
AR-253 Building Construction I AR-214 Structural Mechanics and RCC Design (Paper B)
BM-242 Operational Amplifier and Application MATH-233 Applied Mathematic II (Paper B)
RACT-243 Advance Refrigeration (Paper B) MATH-223 Applied Mathematic II (Paper B)
MT-252 Metrology
AF-222 Crop Husbandry
-----
MATH-223 Applied Mathematic II (Paper B)
MATH-233 Applied Mathematic II (Paper B)
MT-236 Workshop Practice II
-----
-----
*COMP-122
Computer Application
*ELT-214
------------Elect: Devices & Circuits (Paper A) *ELT-214 Elect: Devices & Circuits (Paper B) MGM-221 Business Manag: & Industrial Eco: ELT-243 Pulse and Digital Circuit
*TC-214
Telecom Elect: & Circuits (Paper A) *TC-214 Telec: Electr: & Circuits (Paper B) MGM-221 Business Manag: & Industrial Eco: TC-253 Telephone Exchange -----------------
-----
-----
-----
CHT-293 Chemical Engineering I MGM-221 Business Manag: & Industrial Eco: CHT-254 Industrial Chemical Process I (Paper B)
-----
-----
-----
-----
MGM-232 Industrial Management & Economics
MGM-232 Industrial Management & Economics
-----
MGM-221 Business Manag: & Industrial Eco:
MGM-221 Business Manag: & Industrial Eco:
-----
-----
BM-233 Electrical Machine & Industrial Electronics MGM-221 Business Manag: & Industrial Eco: BM-212 Patient Safety & Ultrasound, Radiation Physics
RACT-233 Engineering & Architecture Drawing MGM-232 Industrial Management & Economics RACT-253 Workshop Practice II
-----
-----
-----
-----
-----
-----
-----
Note: -
( Jamal Akbar )
Controller of Examinations
3rd Year
THEORY
DATE SHEET
FOR DIPLOMA OF ASSOCIATE ENGINEER NEW COURSE ANNUAL EXAMINATION 2013 THEORY PAPERS


16.05.201 3 Thursday Morning 17.05.201 3 Friday Evening 20.05.201 3 Monday Evening 22.05.201 3 Wednesda y Morning 23.05.201 3 Thursday Evening 25.05.201 3 Saturday Morning 28.05.201 3 Tuesday Morning
GEN-311 Islamyat / Pak. Study AD-313 Computer Application in CAD and Automation AD-323 Fuel Injection & Carburetion AD-333 Automotive Transmission
GEN-311 Islamyat / Pak. Study AD-313 Computer App: in CAD & Automation AD-323 Fuel Injection & Carburetion AD-333 Automotive Transmission
GEN-311 Islamyat / Pak. Study CT-353 Railways, Docks, Harbours and Bridges CT-344 Hydraulics & Irrigation (Paper A) CT-333 Public Health Engineering II CT-373 Soil Mechanics Highway and Airports CT-364 Concrete Tech: & RCC Design (Paper A) CT-364 Concrete Tech: and RCC Design (Paper B)
GEN-311 Islamyat / Pak. Study CHT-324 Industrial Chemical Process II (Paper A) CHT-335 Chemical Engineering II (Paper A) CHT-314 Instrumental Methods of Analysis
GEN-311 Islamyat / Pak. Study ET-364 Digital and Industrial Electronics (Paper A) ET-343 Telecommunication ET-353 Repair and Maintenance of Electrical Equipment ET-316 AC Machines (Paper A) ET-322 Power Plant and Energy Conserv: MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
GEN-311 Islamyat / Pak. Study MT-312 Hydraulics & Hydraulic Machines MT-323 Application Thermodyn: & Energy Covn:
GEN-311 Islamyat / Pak. Study TC-312 Radio Communic: System II TC-332 Antenna & Wave propagation TC-325 TV Circuits and Systems (Paper A) TC-342 Mircroproc: App: and Interfaces TC-363 Digital Communic: MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
GEN-311 Islamyat / Pak. Study COMP-344 Operating System and C Language COMP-352 Computer Hardware
GEN-311 Islamyat / Pak. Study BM-312 Opto Electr:, Fiber Optics and Laser BM-342 Bio Chemistry & Clinic Lab Equipment BM-324 Fundament: of Micro-Proc: & Interfacing Techniques BM-311 Med: Termin: & Human Anatomy & Physiology BM-322 Steriliz:, Autocl: & Med Gases, Vacuum Sys MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
GEN-311 Islamyat / Pak. Study RACT-314 Air Condition System Design (Paper A) RACT-322 Water and Air Distribution
ELT-312 Communic: System II
AR-324 Arch: Design & Drawing - II AR-312 Building Economics & Management / Safety Pract:
ELT-333 Industrial Electronics
MT-343 Machine Design
ELT-326 TV Circuits and Systems (Paper A) ELT-342 Antenna and Transmission Lines ELT-351 Microwave and Radar MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
COMP-314 Computer Maintenance and Servicing COMP-323 Computer Peripherals & interfacing COMP-332 Data Commu: & Computer Network MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
-----
RACT-334 Control and Instrument (Paper A) RACT-363 Heat Transfer & Ref: Circulation (Paper A) RACT-342 Industrial Reg: and Air Cond: MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
AD-342 Motor Vehicle Inspection AD-353 Auto Body Building and Finishing AD-362 Motor Vehicle Driving
AD-342 Motor Vehicle Inspection AF-312 Soil and Fertilizers AF-323 Farm Machinery II
CHT-372 Industrial Stoichiometry
MT-332 Ind: Engg: Ind: Planning & Pord: Met: MT-353 Tool Design and Making MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
AR-353 Building Construction II AR-373 Estimation and spici: by laws MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
CHT-342 Process Inst: and Control MGM-311 Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
3rd Year New Course Theory Papers( ANNUAL EXAMINATION 2013

Date, Day & Time Auto & Diesel Technology Auto & Farm Technology Civil Technology Chemical Technology Electrical Technology Mechanical Technology Electronics Technology Telecommunication Technology
Computer Hardware Technology
Architechture Technology
Bio-Medical Technology BM-361 Bio Med: Equ: maint: manuf: & computer app: in Engg: BM-334 ECG and Ultra-Sound Equipment BM-354 Therapeutic Bio Medical Equipment
Refrigeration & Air Cond: Technology
29.05.201 3 Wednesda y Evening 31.05.201 3 Friday Morning 01.06.201 3 Saturday Morning 03.06.201 3 Monday Evening 04.06.201 3 Tuesday Evening
AD-374 Workshop Practice II MGM-321 Business Communic: AD-392 Metallurgy & Heat Treatment
-----
AF-344 Workshop Practice II
CT-312 Project Management
CHT-362 Energy Conser: / Pollution CHT-324 Industrial Chemical Process II (Paper B) CHT-335 Chemical Engg: - II (Paper B)
ET-335 Trans: Dist: & Protect of Ele: Power Sys: (Paper A) MGM-321 Business Communic: ET-364 Digital & Industrial Electronics (Paper B) ET-316 A.C. Machine (Paper B) ET-335 Trans: Dist: & Protect of Ele: Power Sys: (Paper B)
MT-374 Workshop Practice II MT-362 Materials Testing & Heat Treatment MT-382 Computer Integrated Manuf: CIM
ELT-363 Mircroproc: and Microcomp:
TC-382 Fiber Optics and Satellite Communic: TC-325 TV Circuits and System (Paper B)
COMP-362 MicroProcessor Programming
-----
RACT-334 Control and Instrument (Paper B)
CT-344 Hydraulics and Irrigation (Paper B)
ELT-326 TV Circuits and System (Paper B)
-----
MGM-321 Business Communic: RACT-363 Heat Transfer and Ref: Circulation (Paper B) RACT-314 Air-Condition Sys: Design (Paper B)
AF-332 Earth Moving Machinery
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
Note: -
3RD YEAR
DATE SHEET
FOR DIPLOMA OF ASSOCIATE ENGINEER 3
DATE & DAY Auto Technology AD-313 Computer App: in CAD & Automation AD-323 Fuel Injection & Carburetion Auto Farm Technology AD-313 Computer App: in CAD & Automation AD-323 Fuel Injection & Carburation Chemical Technology CHT-314 Instrumental Methods of Analysis CHT-324 Industrial Chemical Process II
RD
PRACTICAL
YEAR NEW COURSE SUBJECT WISE PRACTICAL ANNUAL EXAMINATION 2013

Friday= 09:00 A.M to 01:00 P.M & 02:00 P.M to 04:00 P.M
Electrical Technology ET-316 AC Machines Mechanical Technology Electronics Technology R.A.C. Tech: RACT-314 Air Conditi: System Design RACT-334 Control and Instrumentati on Bio-Medical Technology BM-312 Opto Electronics, Fiber Optics & Laser BM-324 Fund: of Micro Process & Interfacing Tech: BM-322 Sterilization Autoclaves & Med: Gases, Vacuum BM-334 ECG & Ultrasound Equ: BM-342 Bio Chemistry & Clinic Lab Equ: BM-354 Therapeutic Bio Medical Equ: _____ ___ ___ Comp: Hardware Tech: COMP-314 Computer Maintenance & Servicing COMP-323 Computer Peripherals & Interfacing Architecture Technology AR-373 Estimation and Specification by laws AR-324 Arch. Design & Drawing II Telecom: Technology TC-312 Radio Communicati on System II TC-325 TV Circuits and Systems
Time = 09:00 A.M to 03:00 P.M (Excluding)

Civil Technology CT-322 Quantity Surveying II CT-333 Public Health Engineering II
10.06.2013 Monday
MT-323 ELT-312 App: Communicat Thermodynam: ion System & Energy II Conservation MT-332 Industrial Engg: Industrial Planning & Production Methods MT-343 Machine Design MT-353 Tool Design & Making ELT-326 TV Circuits & System
11.06.2013 Tuesday
ET-335 Transmission Distribution & Protec: of Electrical Power System. ET-343 Telecom:
12.06.2013 Wednesday
AD-333 Automotive Transmission AD-342 Motor Vehicle Inspection
AD-333 Automotive Transmissi on AD-342 Motor Vehicle Inspection AF-312 Soils & Fertilizers
CHT-335 Chemical Engineering II CHT-362 Energy Conservation / Pollution CHT-352 Chemical Technology Practice
CT-344 Hydraulics & Irrigation CT-353 Railways, Docks, Har: & Bridges CT-373 Soil Mechanics Highway & Airports CT-381 Civil Engineering Project CT-364 Concrete Tech: & R.C.C. Design ___
ELT-333 Industrial Electronics ELT-342 Antina & transmission Lines ELT-363 Microprocess or & Microcomput er ELT-371 Equipment Servicing & Project (Lab)
RACT-352 Technical Project RACT-373 RAC Workshop Practice III ___
13.06.2013 Thursday
14.06.2013 Friday
AD-353 Auto body building & finishing AD-362 Motor Vehicle Driving
ET-353 Repair & Maintenance of Elect: Equipment ET-364 Digital & Industrial Electronics
COMP-332 Data COmmun: & Computer Network COMP-344 Operating System & C language COMP-352 Computer Hardware
AR-333 Auto CAD II AR-342 Model Making / Project AR-353 Building Construction II ___
TC-332 Antenna and Wave Propagation TC-342 Microprocess or Applic: & Interfaces TC-352 Telecom Equipment Servicing TC-363 Digital Comm:
15.06.2013 Saturday
AF-323 Farm Machinery II AF-332 Earth Moving Machinery AF-344 Workshop Practice III
___
___
MT-362 Materials Testing & Heat Treatment MT-374 Workshop Practice II MT-382 Computer integrated Manufat: MT-312 Hydraulics & Hydraulics Machine
___
COMP-362 Microprocess or Programming _______
17.06.2013 Monday
18.06.2013 Tuesday
AD-374 Workshop Practice III MT-392 Metallurgy & Heat Treatment
___
___
___
TC-372 Project
______ ___ ___
_______ ___
___
___
TC-382 Fiber Optics & Satellite Comm:
( Jamal Akbar )
Controller of Examinations
2ND YEAR
PRACTICAL
DATE SHEET
FOR DIPLOMA OF ASSOCIATE ENGINEER 2
DATE & DAY 19.06.201 3 Wednesda y And 20.06.201 3 Thursday 21.06.201 3 Friday 22.06.201 3 Saturday 24.06.201 3 Monday 25.06.201 3 Tuesday 26.06.201 3 Wednesda y 27.06.201 3 Thursday 28.06.201 3 Friday
ND
YEAR NEW COURSE SUBJECTWISE PRACTICAL ANNUAL EXAMINATION 2013

Friday= 09:00 A.M to 01:00 P.M & 02:00 P.M to 04:30 P.M
Mechanical
Category "A" 1. MT-223 Engg: Drawing-II A. Machine Drg: B. CAD-II 2. MT-236 Workshop Prac-II A. Machine Drawing B. Foundry & Pattern Making C. Adv: Welding Category "B" MT-212 Metrology Category "B" PHY-212 Applied Mechanics Category "B" ET-202 App: Electricity & Electronics ___
Time = 09:00 A.M to 03:00 P.M (Excluding)

Auto Auto + Farm Chemical Civil
Electrical
Category "A" 1. ET-271 Work Shop Practice - I Basic Machine Shop 2. ET-242 Installation Planning & Estimating Category "B" ET-213 DC Machines & Batteries Category "B" PHY-222 Applied Physics Category "B" ET-223 Electrical Instt:& Meas:
Electronics
R.A.C.
Architecture
Telecomm:
Bio-Medical
BM-214 Solid State Electronics
CompHardware
COMP-214 Computer Organization & Basic Prog 19.06.2013 Wednesday COMP-232 Motors & Power Supply 20.06.2013 Thursday COMP-243 Digital Elect: & Microprocessor COMP-253 Measuring Instruments
Category "A" AD-234 Work Shop Practice - II
Category "A" AD-234 Work Shop Practice - II
___
Category "A" 1. CT-233 Constru: - II 2. CT-243 Civil Drafting II
_____
Category "A" 1.RACT-233 Engg: & Arch: Drg: 2. RACT-253 Work Shop Practice -II
Category "A" 1. AR-224 Arch: Design & Drawing-I 2. AR-242 Free Hand Drg: & Rendering-II 3. AR-253 Build: Const-I Category "B" AR-214 Structural Mech: RCC Design Category "B" AR-233 Auto CAD-I
Category "A" TC-222 Digital Circuits & Micro Processor
Category "B" AD-212 Applied Thermodyn: Category "B" AD-223 Suspension Steer:& Brakes Category "B" AD-243 Problem in I.C Engines Category "B" MT-252 Metrology Category "B" CH-213 Applied Chemistry
Category "B" AD-212 Applied Thermodyn: Category "B" PHY-212 Applied Mechanics Category "B" CH-213 Applied Chemistry Category "B" AF-222 Crop Husbandry Category "B" AF-213 Farm Machinery-I
Category "B" CHT-254 Indu: Chemical Process-I Category "B" CHT-293 Chemical Engg-I Category "B" CHT-244 Organic Chemistry Category "B" CHT-283 Physical Chemistry Category "B" CHT-263 Quantitative Analysis
Category "B" CT-212 Public Health Engineering Category "B" CT-253 Mechanics of Structures Category "B" CT-262 Quantity Surveying-I Category "B" CT-224 Surveying -I Category "B" Comp - 122 Computer Application
Category "B" ELT-222 Motors & Generators Category "B" ELT-233 Measuring Instruments Category "B" ELT-264 Amp:&Radio Receivers Category "B" ELT-214 Elec:Devices & Circuits Category "B" ELT-252 Comm: System-I Category "B"
Category "B" PHY-212 Applied Mechanics Category "B" RACT-223 App:Therm:& Low Pressure Category "B" RACT-214 Principle of Aircondit: _____
Category "B" CH-222 Applied Chemistry Category "B" TC-243 Radio Comm:Sys-I Category "B" TC-253 Telephone & Exchange Category "B" TC-262 Power Plant Category "B" TC-214 Tele-Comm: Ele:&Circuits
19.06.2013 Wednesday BM-233 Elect:Machine & Industrial Electronics 20.06.2013 Thursday ELT-233 Measuring Instruments BM-242 Operational Amplifier & Application BM-212 Patients Safety & Ultrasound Radiation Phys: BM-223 X-Ray & Film Processing Eq:
_____
COMP-262 Controls & Automation COMP-223 Electronics Devices & Circuits II
Category "B" ET-233 Utilization of Electr: Energy

Category "B" ET-263 Basic Electronics Category "B" ET-251 App: of Comp: in Elect. Tech
______
____
____
_____
BM-222 Digital Electronics
____
Category "B" PHY-212 Applied Mechanics _____
Category "B" AD-223

Susp:Steering & Brakes
_____
_____
____
Pulse & Digital Circuits Category B"
ELT-243
_____
_____
Category "B" TC-233 Measuring Instruments ___
_____
_____
______
_____
_____
_____
____
_____
_____
_____
_____
Important Note for 1st year students:

1. 2. As per newly introduced DAE Practical Exam System, the DAE 1st year students admitted for the session 2012-13 shall be evaluated 100 % internally as per criteria notified by the BTE. For practical compartment students if any, the concerned institute will conduct practical examination as per their own schedule after 28.06.2013.
DATE SHEET
FOR DIPLOMA IN FOOD TECHNOLOGY ANNUAL EXAMINATION 2013 NEW COURSE
( THEORY )
Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
IST YEAR DATE, DAY & TIME

15.05.2013 Wednesday ( Morning ) 16.05.2013 Thursday ( Evening ) 18.05.2013 Saturday ( Morning ) 21.05.2013 Tuesday ( Morning ) 22.05.2013 Wednesday ( Evening ) 24.05.2013 Friday ( Morning ) 27.05.2013 Monday ( Morning ) 28.05.2013 Tuesday ( Evening ) 31.05.2013 Friday ( Evening )
SUBJECTS
Gen-111 Islamiat / Pak Studies Phy-113 Applied Physics Math-113 Applied Mathematics-I-A Gen-112 English Math-113 Applied Mathematics-I-B FT-124 General and Food Microbiology FT-113 Intro: to Food Science & Technology CH-123 Applied Chemistry Comp-122 Computer Application
2 DATE, DAY &TIME

15.05.2013 Wednesday ( Evening ) 17.05.2013 Friday ( Morning ) 20.05.2013 Monday ( Morning ) 21.05.2013 Tuesday ( Evening ) 23.05.2013 Thursday ( Morning ) 24.05.2013 Friday ( Evening ) 27.05.2013 Monday ( Evening ) 29.05.2013 Wednesday ( Morning ) 30.05.2013 Thursday ( Evening ) 04.06.2013 Tuesday ( Morning )
ND
YEAR SUBJECTS
Gen -211 Islamiat/ Pakistan Studies FT- 213 Food Chemistry FT- 224 Food Analysis and Instrumentation FT -233 Principles of Food Engineering FT- 245 Technology of Foods-I-A FT-252 Food Plant Layout and Hygiene Math- 233 Applied Mathematics-II-A FT- 245 Technology of Foods-I-B Math- 233 Applied Mathematics-II-B MGM- 221 Business Manag: & Indus: Eco:
3RD YEAR DATE, DAY &TIME

16.05.2013 Thursday ( Morning ) 17.05.2013 Friday ( Evening ) 20.05.2013 Monday ( Evening ) 22.05.2013 Wednesday ( Morning ) 23.05.2013 Thursday ( Evening ) 25.05.2013 Saturday ( Morning ) 28.05.2013 Tuesday ( Morning ) 29.05.2013 Wednesday ( Evening ) 31.05.2013 Friday ( Morning ) 01.06.2013Saturday ( Morning) 03.06.2013 Monday ( Evening )
SUBJECTS
Gen -311 Islamiat/ Pakistan Studies FT- 312 Food and Nutrition FT- 325 Technology of Food-II-A FT -333 Quality Control FT-361 Food Standards and Legislation FT-342 Food Packaging
Mgm-311 Indus: Mang: and Human Relations
FT- 351 Factory and Safety Laws Mgm- 321 Business Communication FT- 325 Technology of Food-II-B Ft-373 Waste Management
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR DATE SHEET FOR DIPLOMA IN FOOD TECHNOLOGY
Time: 9:00 AM to 03:00 PM (Excluding) (Friday 09:00 AM to 01:00 PM & 02:00 PM to 04:00 PM)
ANNUAL EXAMINATION, 2013
( PRACTICAL )
3RD YEAR
DATE & DAY
10.06.2013 Monday 11.06.2013 Tuesday 12.06.2013 Wednesday 13.06.2013 Thursday 14.06.2013 Friday
SUBJECTS FT-325 FT-333 FT-342 FT-373 FT-382 Technology of Food-2 Quality Control Food Packaging Waste Management Special Project
2ND YEAR
DATE & DAY
19.06.2013 Wednesday 20.06.2013 Thursday 21.06.2013 Friday 22.06.2013 Saturday 24.06.2013 Monday
SUBJECTS FT -213 FT- 224 FT- 233 FT- 245 FT- 252 Food Chemistry Food Analysis and Instrumentation Principles of Food Engineering Technology of Foods-I Food Plant Layout and Hygiene

DATE SHEET
ANNUAL EXAMINATION 2013 NEW COURSE Time: Morning = 9:00 AM to 12:00 PM
PETROLEUM TECHNOLOGY
( THEORY )
DATE, DAY & TIME
15.05.2013 Wednesday (Morning) 16.05.2013 Thursday (Evening) 18.05.2013 Saturday (Morning) 20.05.2013 Monday (Morning) 21.05.2013 Tuesday (Morning) 22.05.2013 Wednesday (Evening) 24.05.2013 Friday (Morning) 27.05.2013 Monday (Morning) 28.05.2013 Tuesday (Evening) 30.05.2013 Thursday (Morning) 31.05.2013 Friday (Evening)
IST YEAR
SUBJECTS
Gen-111 Islamiat / Pak. Studies Phy-123 Applied Physics Math-113 Applied Mathematics-I-Paper-A ET-212 Applied Electricity & Electronics Gen-112 English Math-113 Applied Mathematics-I-Paper-B Pet-123 Workshop Practice-I Pet-113 Fundamentals of Petroleum Tech: CH-133 Applied Chemistry MT-142 Basic Engineering Drawing Comp-122 Computer Application

1. 2. As per newly introduced DAE Practical Exam System, the DAE 1 st year students admitted for the session 2012-13 shall be evaluated 100 % internally as per criteria notified by the BTE. For practical compartment students if any, the concerned institute will conduct practical examination as per their own schedule after 28.06.2013.
DATE SHEET
PETROLEUM TECHNOLOGY YEAR

( THEORY )
DATE, DAY & TIME
15.05.2013 Wednesday (Evening) 17.05.2013 Friday (Morning) 21.05.2013 Tuesday (Evening) 23.05.2013 Thursday (Morning) 24.05.2013 Friday (Evening) 27.05.2013 Monday (Evening) 29.05.2013 Wednesday (Morning) 30.05.2013 Thursday (Evening) 01.06.2013 Saturday (Morning) 03.06.2013 Monday (Morning)
2ND
SUBJECTS
Gen-211 Islamiat / Pak. Studies Pet-253 Fuels and Combustion Pet-213 Petroleum Geology MGM-211 Business Communication Pet-233 Petrochemicals & Industrial Stoichiometry Math-213 Applied Mathematics-Paper-A Comp-213 Computer Application Software Math-213 Applied Mathematics-Paper-B Pet-243 Drilling Technology Pet-223 Fluid Mechanics & Thermodynamics
( PRACTICAL )
Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04:00 PM
DATE, DAY & TIME

19.06.2013 Wednesday 20.06.2013 Thursday 21.06.2013 Friday 22.06.2013 Saturday 24.06.2013 Monday 25.06.2013 Tuesday 26.06.2013 Wednesday
SUBJECTS
Pet-261 Workshop Practice-II Pet-223 Fluid Mechanics & Thermodynamics Pet-213 Petroleum Geology Pet-243 Drilling Technology Pet-233 Petrochemicals & Industrial Stoichiometry Comp-213 Computer Application Software Pet-253 Fuels and Combustion
DATE SHEET
Time: Morning = 9:00 AM to 12:00 PM ANNUAL EXAMINATION 2013 NEW COURSE
PETROLEUM TECHNOLOGY
( THEORY )
DATE, DAY & TIME
16.05.2013 Thursday (Morning) 17.05.2013 Friday (Evening) 20.05.2013 Monday (Evening) 22.05.2013 Wednesday (Morning) 23.05.2013 Thursday (Evening) 25.05.2013 Saturday (Morning) 28.05.2013 Tuesday (Morning) 29.05.2013 Wednesday (Evening) 31.05.2013 Friday (Morning) 04.06.2013 Tuesday (Morning)
3rd YEAR
SUBJECTS
Gen-311 Islamiat / Pak. Studies Pet-313 Petroleum Refining Pet323 Well Logging And Testing Pet-333 Gas Technology Pet-343 Petroleum Production Technology Ar-133 Basic Computer in Petroleum Technology Pet-351 Safety Practices and Procedures Pet-363 Instrumentation and Control Pet-371 Environmental Control Mgm-221 Business Management and Industrial Economics
( PRACTICAL )
Time: 09.00.A.M. to 03.00.P.M. ( Excluding ) FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04:00 PM
DATE, DAY & TIME

10.06.2013 Monday 11.06.2013 Tuesday 12.06.2013 Wednesday 13.06.2013 Thursday 14.06.2013 Friday 15.06.2013 Saturday
SUBJECTS
Pet-313 Petroleum Refining Pet323 Well Logging And Testing Pet-333 Gas Technology Pet-343 Petroleum Production Technology Ar-133 Basic Computer in Petroleum Technology Pet-363 Instrumentation and Control
DATE SHEET
( THEORY )
IST YEAR
DATE, DAY & TIME

15.05.2013 Wednesday (Morning) 16.05.2013 Thursday (Evening) 18.05.2013 Saturday (Morning) 21.05.2013 Tuesday (Morning) 22.05.2013 Wednesday (Evening) 24.05.2013 Friday (Morning) 27.05.2013 Monday (Morning) 28.05.2013 Tuesday (Evening) 30.05.2013 Thursday (Morning) 31.05.2013 Friday (Evening)
PRECISION MECHANICAL & INSTRUMENTS TECHNOLOGY SUBJECTS

Gen-111 Islamiat / Pak. Studies Phy-113 Applied Physics Math-113 Applied Mathematics-I-PaperA Gen-112 English Math-113 Applied Mathematics-I-PaperB WT-156 Workshop Technology-I TD-153 Technical Drawing CH-112 Applied Chemistry MS-151 Material Science-I Comp-122 Computer Application
DIE AND MOULD TECHNOLOGY (4 YEARS COURSE) SUBJECTS

Gen-111 Islamiat / Pak. Studies Phy-113 Applied Physics Math-113 Applied Mathematics-I-Paper-A Gen-112 English Math-113 Applied Mathematics-I-Paper-B WT-156 Workshop Technology-I TD-153 Technical Drawing CH-112 Applied Chemistry MS-151 Material Science-I Comp-122 Computer Application

DATE SHEET
ANNUAL EXAMINATION 2013 NEW COURSE Time: Morning = 9:00 AM to 12:00 PM Evening = 2:00 PM to 5:00 PM
( THEORY )
DATE, DAY & TIME
15-05-2013 Wednesday (Evening) 17-05-2013 Friday (Morning) 20-05-2013 Monday (Morning) 21-05-2013 Tuesday (Evening) 23-05-2013 Thursday (Morning) 24-05-2013 Friday (Evening) 27-05-2013 Monday (Evening) 29-05-2013 Wednesday (Morning) 30-05-2013 Thursday (Evening) 03-06-2013 Monday (Morning) 04-06-2013 Tuesday (Morning) PRECISION MECHANICAL & INSTRUMENTS TECHNOLOGY
2ND YEAR
DIE & MOULD TECHNOLOGY (4 YEARS COURSE)
SUBJECTS
Gen-211 Islamiat / Pak. Studies Phy-212 Applied Mechanics ET-202 Applied Electricity & Electronics MS-212 Material Science-II MGM-211 Business Communication TD-253 Technical Drawing and CAD-I Math-213 Applied Mathematics-II-Paper-A MT-212 Metrology Math-213 Applied Mathematics-II-Paper-B WT-226 Workshop Technology-II MGM-221 Business Mangt: & Industrial Economics
SUBJECTS
Gen-211 Islamiat / Pak. Studies Phy-212 Applied Mechanics ET-202 Applied Electricity & Electronics MS-212 Material Science-II MGM-211 Business Communication TD-253 Technical Drawing and CAD-I Math-213 Applied Mathematics-II-Paper-A MT-212 Metrology Math-213 Applied Mathematics-II-Paper-B WT-226 Workshop Technology-II MGM-221 Business Mangt: & Industrial Economics
( PRACTICAL )
DATE, DAY & TIME

20-06-2013 Thursday 21-06-2013 Friday 22-06-2013 Saturday 24-06-2013 Monday 25-06-2013 Tuesday
PRECISION MECHANICAL & INSTRUMENTS TECHNOLOGY
SUBJECTS
WT-226 Workshop Technology-II TD-253 Technical Drawing and CAD-I MT-212 Metrology ET-202 Applied Electricity & Electronics Phy-212 Applied Mechanics
SUBJECTS
WT-226 Workshop Technology-II TD-253 Technical Drawing and CAD-I MT-212 Metrology ET-202 Applied Electricity & Electronics Phy-212 Applied Mechanics
DATE SHEET
( THEORY )
DATE, DAY & TIME
16-05-2013 Thursday(Morning) 17-05-2013 Friday (Evening) 20-05-2013 Monday (Evening) 22-05-2013 Wednesday(Morning) 23-05-2013 Thursday (Evening) 25-05-2013 Saturday (Morning) 28-05-2013 Tuesday (Morning) 29-05-2013 Wednesday (Evening) 31-05-2013 Friday (Morning) 01-06-2013 Saturday (Morning)
3RD YEAR
PRECISION MECHANICAL & INSTRUMENTS TECHNOLOGY
SUBJECTS
Gen-311 Islamiat / Pak. Studies IS-322 Instrument Science MT-323 Applied Thermodynamics and Energy conservation Mt-343 Machine Design MT-332 Industrial Engr: (Industrial Planning & Production Methods) TD-362 Technical Drawing and CAD-II IPI-323 Industrial Process Instrumentation WT-354 Workshop Technology-III MT-362 Material Testing & Heat Treatment MT-382 Computer Integrated Manufacturing (CIM)
SUBJECTS
Gen-311 Islamiat / Pak. Studies DM-351 Tool Technology-I MT-323 Applied Thermodynamics and Energy conservation Mt-343 Machine Design MT-332 Industrial Engr: (Industrial Planning & Production Methods) TD-362 Technical Drawing and CAD-II DM-372 Special Purpose Machines DM-384 Workshop Technology-DM MT-362 Material Testing & Heat Treatment DM-361 Tool Technology-II
( PRACTICAL )
DATE, DAY & TIME

10-06-2013 Monday 11-06-2013 Tuesday 12-06-2013 Wednesday 13-06-2013 Thursday 14-06-2013 Friday 15-06-2013 Saturday 17-06-2013 Monday 18-06-2013 Tuesday 19-06-2013 Wednesday
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04.00 PM PRECISION MECHANICAL & DIE & MOULD TECHNOLOGY INSTRUMENTS TECHNOLOGY (4 YEARS COURSE)
SUBJECTS
MT-323 Applied Thermodynamics and Energy conservation MT-332 Industrial Engr: (Industrial Planning & Production Methods) Mt-343 Machine Design IPI-323 Industrial Process Instrumentation MT-362 Material Testing & Heat Treatment WT-354 Workshop Technology-III MT-382 Computer Integrated Manuf:[CIM] TD-362 Technical Drawing and CAD-II IS-322 Instrument Science
SUBJECTS
MT-323 Applied Thermodynamics and Energy conservation MT-332 Industrial Engr: (Industrial Planning & Production Methods Mt-343 Machine Design DM-372 Special Purpose Machines MT-362 Material Testing & Heat Treatment DM-384 Workshop Technology-DM -----------TD-362 Technical Drawing and CAD-II -----------
DATE SHEET
Time: Morning = 09:00 AM to 12:00 PM ANNUAL EXAMINATION 2013 NEW COURSE
( THEORY )
DATE, DAY & TIME
01.06.2013 Saturday (Evening) 03.06.2013 Monday (Evening) 04.06.2013 Tuesday (Evening) 05.06.2013 Wednesday (Morning) 06.06.2013 Thursday (Morning) 07.06.2013 Friday (Morning) 08.06.2013 Saturday (Morning) 10.06.2013 Monday (Morning)
4TH YEAR

DM-414 Tool Technology I (Paper A) DM-414 Tool Technology I (Paper B) DM-424 Tool Technology II (Paper A) DM-424 Tool Technology II (Paper B) DM-433 Special Purpose Machine DM-463 CNC Machines DM-445 Workshop Technology DM DM-454 Tool Design and Making
( PRACTICAL )
DATE, DAY & TIME

26.06.2013 Wednesday 27.06.2013 Thursday 28.06.2013 Friday 29.06.2013 Saturday

DM-433 Special Purpose Machine DM-445 Workshop Technology DM DM-454 Tool Design and Making DM-463 CNC Machines
DATE SHEET
FOR DIPLOMA IN DRESS DESIGNING AND MAKING ( D.D.M ) ANNUAL EXAMINATION 2013, THEORY PAPERS ( NEW & OLD COURSE )
IST YEAR
DATE, DAY & TIME ( NEW COURSE )
GEN-111 Islamiyat / Pak. Study DDM-116 Machine/Hand Embroidery Math-153 Mathematics GEN-112 English DDM-123 Drafting & Pattern Making DDM-133 Sewing Techniques
( OLD COURSE )
GEN-111 Islamiyat / Pak. Study DDM-116 Machine / Hand Embroidery Math-153 Applied Mathematics GEN-112 English DDM-123 Drafting DDM-134 Sewing Techniques
15.05.2013 Wednesday (Morning) 16.05.2013 Thursday (Evening) 18.05.2013 Saturday (Morning) 21.05.2013 Tuesday (Morning) 22.05.2013 Wednesday (Evening) 24.05.2013 Friday (Morning)
2ND YEAR
GEN-221 Islamiyat / Pak. Study DDM-213 Figure Drafting/ Sketching DDM-224 Basic Design I DDM-232 Drafting & Pattern Making-II DDM-242 Sewing Techniques DDM-253 Knit Crafting DDM-263 Computer
( OLD COURSE )
GEN-221 Islamiyat / Pak. Study DDM-213 Figure Drafting/ Sketching DDM-224 Basic Design I DDM-233 Drafting & Pattern Making DDM-243 Sewing Techniques DDM-254 Knit Crafting ---------------------
15.05.2013 Wednesday (Evening) 17.05.2013 Friday (Morning) 20.05.2013 Monday (Morning) 21.05.2013 Tuesday (Evening) 23.05.2013 Thursday (Morning) 24.05.2013 Friday (Evening) 27.05.2013 Monday (Evening)
3RD YEAR
GEN-311 Islamyat/Pak Study MGM-312 Marketing & Business Management DDM -314 Advance Figure Drawing DDM-324 Textile Design DDM-343 Drafting & Pattern Making DDM -353 Sewing ------------
( OLD COURSE )
ISL-331 Islamiyat / Pak. Study MGM-312 Marketing Business Management DDM-314 Advance Figure Drawing DDM-324 Advance Design DDM-343 Drafting and Pattern Making DDM-353 Sewing DDM-334 Fitting Techniques
16.05.2013 Thursday (Morning) 17.05.2013 Friday (Evening) 20.05.2013 Monday (Evening) 22.05.2013 Wednesday (Morning) 23.05.2013 Thursday (Evening) 25.05.2013 Saturday (Morning) 28.05.2013 Tuesday (Morning)
DATE SHEET
FOR DIPLOMA IN DRESS DESIGNING AND MAKING ANNUAL EXAMINATION 2013 (NEW & OLD COURSE )
PRACTICAL
Time: 9:00 AM to 03:00 PM (Friday 9:00 AM to 01:00 PM & 02:00 PM to 04:00 PM)
3RD YEAR
DDM-314 Advance Figure Drawing (Category A Subjects) DDM-324 Advance Design (Category A Subjects) DDM-334 Home Decoration (Category A Subjects) DDM-343 Drafting and Pattern Making (Category A Subjects) DDM-353 Sewing (Category A Subjects)
( OLD COURSE )
DDM-314 Advance Figure Drawing ( Category A Subjects) DDM-324 Advance Design (Category A Subjects) DDM-334 Fitting Techniques (Category A Subjects) DDM-343 Drafting and Pattern Making (Category A Subjects) DDM-353 Sewing (Category A Subjects)
10.06.2013 MONDAY AND 11.06.2013 TUESDAY -DO-DO-DO-DO-
2ND YEAR
DDM-213 Figure Drawing & Sketching (Category A Subjects)
( OLD COURSE )
DDM-213 Figure Drawing & Sketching (Category A Subjects)
19.06.2013 WEDNESDAY AND 20.06.2013 THURSDAY -DO-DO-DO-DO14.06.2013 FRIDAY
DDM-224 Basic Design-I (Category A Subjects) DDM-232 Drafting & Pattern Making-II (Category A Subjects) DDM-242 Sewing Techniques (Category A Subjects) DDM-253 Knitting Craft (Category A Subjects) DDM-263 Computer
DDM-224 Basic Design-I (Category A Subjects) DDM-232 Drafting & Pattern Making-II (Category A Subjects) DDM-242 Sewing Techniques (Category A Subjects) DDM-253 Knitting Craft (Category A Subjects) DDM-263 Computer

DATE SHEET
( THEORY )
IST YEAR
DATE, DAY & TIME

15.05.2013 Wednesday (Morning) 16.05.2013 Thursday (Evening) 18.05.2013 Saturday (Morning) 21.05.2013 Tuesday (Morning) 22.05.2013 Wednesday (Evening) 24.05.2013 Friday (Morning) 27.05.2013 Monday (Morning) 28.05.2013 Tuesday (Evening) 30.05.2013 Thursday (Morning)
COMPUTER INFORMATION TECHNOLOGY SUBJECTS

Gen-111 Islamiat / Pak. Studies & Ethics Phy-112 Applied Physics Math-123 Applied Mathematics-I-Paper-A Eng-112 English Math-123 Applied Mathematics-I-Paper-B CIT-123 Introduction to Comp: Programming CIT-143 Linear Circuit & Basic Electronics Che-132 Applied Chemistry OHSE-101 Occupational Health, Safety & Environment

DATE SHEET
( THEORY )
DATE, DAY & TIME
15.05.2013 Wednesday (Evening) 17.05.2013 Friday (Morning) 20.05.2013 Monday (Morning) 21.05.2013 Tuesday (Evening) 23.05.2013 Thursday (Morning) 24.05.2013 (Evening) 27.05.2013 (Evening) 29.05.2013 Wednesday (Morning) 30.05.2013 Thursday (Evening) 31.05.2013 (Evening) Friday Friday Monday
2ND YEAR

Gen-211 Islamiat / Pak. Studies & Ethics CIT-243 Analog Electronics CIT-253 Digital Electronics CIT-225 Microprocessor Architecture (Paper A) MGM-211 Business Communication CIT-213 Object Oriented Programming MATH-213 Applied Mathematics-II (Paper A) CIT-225 Microprocessor Architecture (Paper B) MATH-213 Applied Mathematics-II (Paper B) CIT-233 Data Communication and Networking
( PRACTICAL )
DATE, DAY & TIME

19.06.2013 Wednesday 20.06.2013 Thursday 21.06.2013 Friday 22.06.2013 Saturday 24.06.2013 Monday

CIT-213 Object Oriented Programming CIT-225 Microprocessor Architecture CIT-233 Data Communication and Networking CIT-243 Analog Electronics CIT-253 Digital Electronics
----sd--( Jamal Akbar ) Controller of Examinations
DATE SHEET
( THEORY )
DATE, DAY & TIME
16.05.2013 Thursday (Morning) 17.05.2013 Friday (Evening) 20.05.2013 Monday (Evening) 22.05.2013 Wednesday (Morning) 23.05.2013 Thursday (Evening) 25.05.2013 Saturday (Morning) 28.05.2013 Tuesday (Morning) 29.05.2013 Wednesday (Evening)
3RD YEAR

Gen-311 Islamiat / Pak. Studies & Ethics CIT-323 Operating System CIT-342 P.C. System Architecture CIT-332 Web Page Development And E-Commerce CIT-353 P.C System and Peripherals Repair CIT-313 Network Administrator MGT-331 Management ENG-311 Technical Report Writing
( PRACTICAL )
Time: 09.00.A.M. to 03.00.P.M. ( Excluding ) FRIDAY 09:00 AM. to 01.00 PM & 02:00 PM to 04:00 PM
DATE, DAY & TIME

10.06.2013 Monday 11.06.2013 Tuesday 12.06.2013 Wednesday 13.06.2013 Thursday 14.06.2013 Friday

CIT-313 Network Administration CIT-323 Operating System CIT-332 Web Page Development and E-Commerce CIT-353 P.C. System and Peripherals Repair CIT-363 Project
--sd-( Jamal Akbar ) Controller of Examinations

DAE Annual Exam Date Sheet 2013 (Theory - Final)

Uploaded by

Copyright:

Available Formats

DAE Annual Exam Date Sheet 2013 (Theory - Final)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DAE Annual Exam Date Sheet 2013 (Theory - Final)

Uploaded by

Copyright:

Available Formats

KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR

Evening = 2:00 PM to 5:00 PM

(Friday Evening 2:30 PM to 5:30 PM)

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

GEN-111 Islamyat / Pak. Study

PHY-122 Applied Physics MATH-113 Applied Mathematics-I (Paper-A)

PHY-122 Applied Physics MATH-113 Applied (Paper-A)

PHY-122 Applied Physics MATH-113 Applied Mathematics-I (Paper-A)

PHY-113 Applied Physics MATH-113 Applied Mathematics-I (Paper-A)

PHY-122 Applied Physics MATH-113 Applied Mathematics-I (Paper-A)

PHY-122 Applied Physics MATH-123 Applied (Paper-A)

PHY-122 Applied Physics MATH-123 Applied Mathematics-I (Paper-A)

PHY-132 Applied Physics MATH-123 Applied Mathematics-I (Paper-A)

PHY-122 Applied Physics MATH-113 Applied Mathematics-I (Paper-A)

PHY-122 Applied Physics MATH-123 Applied Mathematics-I (Paper-A)

PHY-122 Applied Physics MATH-113 Applied Mathematics-I (Paper-A)

MATH-113 Applied Mathematics-I (Paper B)

MATH-113 Applied MathematicsI (Paper B)

MATH-113 Applied Mathematics-I (Paper B)

MATH-113 Applied Mathematics-I (Paper B) CHT-153 Basic Chemical Engg:- I

MATH-123 Applied Mathematics-I (Paper B)

MATH-113 Applied Mathematics-I (Paper B)

MATH-113 Applied Mathematics-I (Paper B)

MATH-113 Applied Mathematics-I (Paper B)

MT-164 Workshop Practice I

MT-164 Workshop Practice I

ET-146 Workshop Practice I ET-115 Principles of Electrical Engr: (Paper-B)

MT-116 Workshop Practice I MT-131 Safety Practice and Procedures

AR-154 Surveying and Levelling AR-112 Building Material and Fabrication

ET-113 Applied Electricity

AD-123 I.C. Engines

AD-123 I.C. Engines

CT-133 Civil Drafting

RACT-113 Principal of Refrigeration

1st Year New Course Theory Papers ( ANNUAL 2013 )

MT-153 Engineering Drawing AD-113 Automotive Electric and Electronics

MT-153 Engineering Drawing AD-113 Automotive Electric and Electronics

CH-112 Applied Chemistry

CHT-164 General Chemistry

CH-132 Applied Chemistry

CH-112 Applied Chemistry MT-143 Basic Engineering and CAD - I

CH-132 Applied Chemistry

CH-112 Applied Chemistry BM-112 Fundamental of Biomedical Equipment and interfaces

CH-112 Applied Chemistry

MT-143 Drawing and CAD - I

*COMP122 Computer Applications

*COMP-122 *COMP-122 *COMP-122

( Jamal Akbar ) Controller of Examinations

KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR

COMP-122 COMP-122 *COMP-122