ICNP Catalog All-20120321

Table of Contents
Introduction
1-1 Industrial Communication & Networking Products - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1-1-1
Multi-port Serial Cards

2-1 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1-1 2-2 Serial Communication Cards - - - - - - - - - - - - - - - - - - - - - 2-2-1 2-3 Applications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-3-1
Serial Device Server

3-1 3-2 3-3 3-4 3-5 Overview -----------------------------Palm-size Programmable Serial-to-Ethernet Device Server Palm-size Serial-to-Ethernet Device Server - - - - - - - - IP67 Programmable Serial-to-Ethernet Device Server - Modular Programmable Serial-to-Ethernet Device Server ----- 3-1-1 - 3-2-1 - 3-3-1 - 3-4-1 - 3-5-1 3-6 3-7 3-8 3-9 Programmable Serial-to-Fiber Device Server - - - - - - - Tiny Serial-to-Ethernet Device Server & Modbus Gateway Programmable Serial Device Server with LAN Switch - - Programmable Modbus to Ethernet Gateway - - - - - - - ---- 3-6-1 - 3-7-1 - 3-8-1 - 3-9-1
Converters, Repeaters, Hubs and Splitter

4-1 4-2 4-3 4-4 RS-485 Network Conguration RS-422/485 Repeaters - - - RS-485 Repeater/Hub/Splitter RS-232/422/485 Converters --- 4-1-1 - 4-2-1 - 4-3-1 - 4-4-1 4-5 Intelligent Communication Controllers - - - - - - - - - - - - - - - 4-5-1 4-6 USB to RS-232/422/485 Converters - - - - - - - - - - - - - - - - 4-6-1 4-7 RS-232/422/485 to Fiber Optic Converter - - - - - - - - - - - - - 4-7-1
Fieldbus Solutions
5-1 5-2 5-3 5-4 5-5 Overview --------------CAN Bus Introduction & Products CANopen Introduction & Products DeviceNet Introduction & Products J1939 Introduction & Products - --------- 5-1-1 - 5-2-1 - 5-3-1 - 5-4-1 - 5-5-1 5-6 5-7 5-8 5-9 PROFIBUS Introduction & Products HART Introduction & Products - - EtherNet/IP Introduction & Products BACnet Introduction & Products - -------- 5-6-1 - 5-7-1 - 5-8-1 - 5-9-1
Ethernet Switches
6-1 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1-1 6-2 Product Showcase - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2-1
7 6
Accessories
7-1 Cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-1-1 7-2 Power Supplies - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-2-1 7-3 Terminal Boards & Connector - - - - - - - - - - - - - - - - - - - - 7-3-1
8 6
Wireless Networking Solutions

8-1 8-2 8-3 8-4 Overview ---WLAN Products DSSS RF Products 2G/3G Products -------- 8-1-1 - 8-2-1 - 8-3-1 - 8-4-1 8-5 8-6 8-7 8-8 ZigBee Products - - - - - - - GPS Products - - - - - - - - - Infrared Products - - - - - - Wireless Applications - - - - - 8-5-1 - 8-6-1 - 8-7-1 - 8-8-1
Trademark
The trademarks, trade names, logos, service marks and the product names ("Marks") mentioned in this document are properties of ICP DAS or other third parties. The user is not permitted to use the Marks without the prior written consent of ICP DAS or such third parties which may own the Marks.
Introduction
1-1 Industrial Communication & Networking Products

-----------------------------1-1-1
RS-485 Bus Repeater, Converter and Hub -----------------------------------------------------------------------------1-1-1 USB to RS-232/422/485/CAN Bus Converters -------------------------------------------------------------------------1-1-2 Multi-port RS-232/422/485 Communication Cards --------------------------------------------------------------------1-1-2 Programmable Serial to Ethernet Device Server ----------------------------------------------------------------------1-1-2 Ethernet Switch ------------------------------------------------------------------------------------------------------------1-1-2 Fieldbus in Industrial Automation ---------------------------------------------------------------------------------------1-1-3
Introduction
1-1 Industrial Communication & Networking Products
1 1
Introduction
Multi-port RS-232/422/485 Communication Cards

The VXC/VEX series card features Universal PCI (3.3 V and 5 V) or PCI Express interface, provides multiple RS-232 or RS-422/485 communication ports and offers 128-byte hardware FIFO for each port. The VXC/VEX series card enables user to install additional communication ports on PCs, and supports 32-bit and 64-bit Windows 7/Vista/2003/XP. Users can select a specied COM port number manually by setting COM-Selector (DIP switch), or let the driver to choose an available number automatically.
1-1-1
PAC Fam ily

ICP DAS CO., LTD.
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Vol. ICNP 2.0.00
Ch ap te r2
Its the best choice for time-critical and reliable communications and controls in industrial environments, like communication with PLC, machine, meter, console management of devices, laboratory instruments and Modem link, etc.
Industrial Communication & Networking Products Catalog
Programmable Serial to Ethernet Device Server

Programmable Device Server (PDS) is Serial-Device to Ethernet gateway. It connects RS232/422/485 serial devices, such as PLC, bar code reader, RFID reader, meters and motion controllers etc., to Ethernet that usually is the existing network in ofce and factory. VxComm Driver creates virtual COM ports on 32-bit and 64-bit Windows 7/Vista/2003/XP and maps them to physical serial ports on PDS remotely. User's serial programs need only to change to the virtual COM port to get the access of serial devices that are allocated in the Internet or Ethernet network via the PDS.
1 1
Introduction
Repeater, Converter, Splitter and Hub

RS-485 is an electrical specification of a two-wire, half-duplex and multipoint serial communications channel. Since it uses a differential balanced line over twisted pair (like RS-422), it can span relatively long distances (up to 4,000 feet (1,200 m)). RS-485 is widely used in the computer automation systems, such as building automation, machine automation and factory automations etc. Used for low cost low-speed data communications, it requires minimal wiring, and shares the wiring among several nodes.
USB to RS-232/422/485/CAN Bus Converters

Universal Serial Bus (USB) is designed to allow many peripherals to be connected by using a single standard interface socket, and to improve the plug-and-play capabilities by hot swapping. In brief, devices can be connected and/or disconnected without rebooting the computer or turning off the device. Currently USB ports are standard interface to external devices on many computers. By using ICP DAS USB converters, users can access industrial RS-232/422/485 serial devices and CAN bus devices through the existing USB ports easily.
Ethernet Switch
Ethernet is an ideal medium to transport large volumes of data, at fast speed, across great distances. Previously, multiple networks carrying specic protocols were installed side by side to carry out unique tasks. This inevitably led to project costs increasing as additional ber optic or copper cables were installed to deal with the increasing volume of data. Using Ethernet, a single ber optic cable can carry multiple protocols. A switch, like a hub, has to forward and receive packets from one network or device to another. The switch forwards all packets, but if this is the case it shall have similar behavior to a hub. It becomes more intelligent if the switch only forwards packets which needs to travel from one network or device to another.
Ch ap te r6
Ch ap te r4
Ch ap te r4
1-1-2 w
ICP DAS provides total solutions on RS-485 bus, such as addressable RS-485 to RS-232/422 converter, RS-485 repeater, RS-232 to RS-485 converter, USB to RS-485 converter, RS-232/422/485 to ber optic converter and RS-485 Hub etc.
Website: http://www.icpdas.com
E-mail: sales@icpdas.com
Vol. ICNP 2.0.00
Ch ap te r3
Introduction
Fieldbus in Industrial Automation
1 1
Introduction 1-1-3 PAC Fam ily
Fieldbus is an industrial network system for real-time distributed control. It is a way to connect instruments in a manufacturing plant. Fieldbus works on a network structure which typically allows daisy-chain, star, ring, branch, and tree network topologies. Fieldbus reduces both the length and the number of cables required. Fieldbus has many major advantages to all applications of automation. The technology of eldbus is mature and well accepted in various elds in markets. ICP DAS has focused on these eldbus products for several years and offers various eldbus solutions in different industrial applications, covering the entire scope of process and manufacturing automation: CAN bus, CANopen, DeviceNet, J1939, PROFIBUS, HART, EtherNet/IP and BACnet applications
Wireless Networking
Industrial Wireless Communication creates new prospects for automation. In the harsh environment, chemicals, vibrations, or moving parts could potentially damage cabling. Industrial Wireless Communication system substantially reduces cost and time for the installation and maintenance of the large number of cable, thus makes plants setup and reconguration easy and safe. ICP DAS provides a great variety of wireless products with modular and universal solution specially designed for industrial harsh environment.
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Ch ap te r8
Ch ap te r5
ICP DASs Fieldbus Development Services group has been involved in the design and development of industrial eldbus and industrial Ethernet products for several years. Besides providing the various eldbus products, the rich experience and expertise helps the customer to arrange the proper system architecture and to solve the problems occurred during setting up a system. By using the ceticated IC and cetication tool, all products are reliable and compatible with other manufacturers products.
1.1
Industrial Communication & Networking Products
P1-1-1
2-1 Overview ----------------------------------------------------------------------------2-1-1 2-2 Serial Communication Cards ------------------------------------------------------2-2-1 2-3 Applications -------------------------------------------------------------------------2-3-1
Overview
2-1 Overview
2 1
Multi-port Serial Cards 2-1-1
Overview
The VXC/VEX multi-port serial card enables user to increase additional communication ports on PCs. Its the on-top-of-thelist choice while you are managing to connect lots of outer devices through your PC; every VXC/VEX card ensures you smooth communication in both time-critical applications and industrial elds. With simply a VXC card, it has never been that easy to integrate a PC with lots of devices, such as PLCs, machines, meters, controller devices, laboratory instruments, modems, card readers, serial printers, RFID readers, bar code readers, sensors, etc.
Features
COM-Selector Each VXC/VEX card is equipped with a COM-Selector (DIP switch) for the COM port number selection. It supports two selection modes: Auto- and Manual-mode. The Auto-mode is the default setting (DIP switch is set as 0), and the uncertain COM port number will be assigned automatically by OS. The COM port number can be different after the PC reboot, and then may cause failures of an automation system. The Manual-mode of the COM-selector (DIP switch is set as 1 ~ 255) can force the card to use user-dened COM port number and eliminates the Auto-mode issues above. It's an important and innovative feature of the VXC/VEX family. The Manual-mode of the COM-Selector provides the following advantages: Simplies the COM port number selection without conguration utility. Species the COM port number directly, regardless of which PCI slot is plugged in. Avoids the confusion of uncertain COM port number that other PnP COM port devices use. Easy to replace a broken card just with the same DIP switch setting.
ESD Protection The VXC/VEX cards offer TVS diode ESD protection technology, protecting your system from being damaged by the high potential voltages. Under normal operating conditions, the TVS diode presents high impedance (appears as an open circuit) to the protected component. When the voltage is beyond the limits, the TVS diode junction avalanches providing a low impedance path for the transient current. As a result, the transient current is diverted away from the protected components and shunted through the TVS diode. The device returns to a high impedance state after the transient threat passed.
Z in Transient Current TVS Diode PROTECTED CIRCUIT
Easy COM Port Selection by DIP switch
C Frame Ground
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Self-Tuner The VXC/VEX card is equipped with a Self-Tuner chip to control the sending/receiving direction of RS-485 ports automatically. Without the help of Self-Tuner, users need to enable RS485 transmitter before sending, and disable the transmitter after finish sending. The timing to enable and disable transmitter (direction control) is the major issue on many communication problems, and it is very difcult to debug. The built-in Self-Tuner on VXC/VEX cards effectively gets rid of this direction control issue and also simplifies software programming for communication applications. Isolation Some VXC/VEX cards offer photo isolation to protect your computer and equipment against damages in harsh environment. Photo coupler is a device that uses a short optical transmission path to transfer a signal between elements of a circuit, typically a transmitter and a receiver. This keeping them electrically isolated since the signal goes from an electrical signal to an optical signal, the electrical contact along the path is broken.
COM port buffer up to 128 KB The VXC card driver for Windows features an up to 128 KB buffer for each port (default is 4 KB). Its practical for large le transmission. Short Card Design The Short Card design is suitable for compact-sized computer, especially for IPC (Industrial Personal Computer) and servers. Universal PCI (3.3 V and 5 V) The Universal PCI card works with both new 3.3 V PCI bus that has been widely-used in servers, and traditional 5 V PCI bus. The universal PCI interface will be the standard for every card from ICP DAS in the near future. PCI Express PCI Express (PCIe) is a computer expansion bus standard. A key difference between PCIe and earlier PC buses is a topology based on point-to-point serial links, rather than a shared parallel bus architecture. Conceptually, the PCIe bus can be thought of as a 'high-speed serial replacement' of the older PCI/PCI-X bus. Various Accessories There are a lot of optional accessories for the VXC/VEX cards, such as RS-232 cables and daughter boards. These tools make wiring much easily than ever.
2 1
2
Photo Coupler Operation
It can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer signicant protection from serious overvoltage conditions in one circuit affecting the other. Hardware FIFO up to 128 bytes FIFO stands for "First In, First Out", an abstraction in ways of organizing and manipulating data relative to time and prioritization. FIFO is used for buffering and flow control while data come from hardware to software. When using hardware FIFO (buffer), a little delay on software or operating system will not lose data at all.
DB-9 Cable DB-9 Daughter Board
DB-9 Cable
DB-37 to 4-port DB-9 Cable
Software gets data in dynamic timing.
Hardware puts data in xed speed.
VXC/VEX Cards are equipped with 16- or 128-byte hardware FIFO for each port. Large hardware FIFO is useful to prevent data lost when your system works on heavy loading, and even helpful while you are running on a multitask operating system, such as Windows, Linux etc.
DB-37 Connector
DB-9 Connector
Vol. ICNP 2.0.00
2-1-2
Overview
Wiring Note for RS-232 and RS-422/485 Devices

RS-232 Wiring
DTE (Computer) 1. DCD 2. RxD 3. TxD 4. DTR 5. GND 6. DSR 7. RTS 8. CTS 9. RI FGND 9-wire RS-232 Connection (DB-9)
DCE (Modem) 1. DCD 2. TxD 3. RxD 4. DSR 5. GND 6. DTR 7. CTS 8. RTS 9. RI FGND
Device RxD TxD GND RTS CTS DTR DSR FGND
Device TxD RxD GND CTS RTS DSR DTR FGND
2 1
3-wire RS-232 Connection (Shorts unused signals RTS/CTS, DTR/DSR)
Note: 1. For 3-wire RS-232 connections, it is recommended to short unused signals such as RTS/CTS and DTR/DSR, since some systems may still check the CTS and DSR status. 2. FGND is the frame ground that soldered to DB-9 metal shield.
RS-485 Wiring
Device 1 DATA+(B) DATA+(B) DATA-(A) FGND Device 2 DATA+(B) DATA-(A) FGND Device 3 DATA-(A) FGND
RS-422 Wiring
4-wire RS-422 Wiring RS-422 Master TxD+(B) TxD-(A) RxD+(B) RxD-(A) GND FGND
2-wire RS-485 Wiring
RS-485 Master DATA+(B) DATA-(A) GND FGND
RS-422 Device RxD+(B) RxD-(A) TxD+(B) TxD-(A) GND FGND
GND
GND
2-wire Only Device
Twisted Pair Wiring plus Ground
Note: 1. For non-isolated RS-422/485 ports, you should connect all signal grounds of RS-422/485 devices together. This reduces common-mode voltage between devices. 2. Twisted-pair cable must be used for the DATA+/- wires. 3. Both two ends of the cable may require a termination resistor connected across the two wires (DATA+ and DATA-). Typically 120 resisters are used.
ICP DAS CO., LTD.
GND
Vol. ICNP 2.0.00
Selection Guide
Universal PCI
Model Name VXC-112AU VXC-112iAU VXC-142AU VXC-142iAU VXC-182iU VXC-114U VXC-114iAU VXC-144U VXC-144iU VXC-164AU VXC-118U VXC-118iU VXC-148U-5w VXC-148iU-5w COMSelector Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 8 8 RS-232 2 2 1 4 4 4 8 8 RS-422/485 2 2 1 4 4 Self-Tuner Yes Yes Yes Yes Yes Yes Yes Yes Isolation 2.5 kV 2.5 kV 2.5 kV 2.5 kV 2.5 kV 2.5 kV 2.5 kV ESD Protection +/-4 kV +/-4 kV +/-4 kV +/-4 kV +/-4 kV +/-4 kV +/-4 kV Max. Speed (bps) 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K FIFO Size (bytes) 128 128 128 128 128 128 128 128 128 128 256 256 256 256 Connector Male DB-9 Male DB-9 Male DB-9 Male DB-9 Male DB-9 Female DB-37 Female DB-37 Female DB-37 Female DB-37 Female DB-37 Female DB-62 Female DB-62 Female DB-62 Female DB-62 Page 2-2-1 2-2-1 2-2-3 2-2-3 2-2-5
2 1
2-2-2 2-2-2 2-2-4 2-2-4 2-2-6 2-2-7 Call 2-2-8 Call
PCI Express
Model Name VEX-112 VEX-112i VEX-142 VEX-142i VEX-114 VEX-114i VEX-144 VEX-144i VEX-118 VEX-118i VEX-148-5w VEX-148i-5w COMSelector Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes RS-232 2 2 4 4 8 8 RS-422/485 2 2 4 4 8 8 Self-Tuner Yes Yes Yes Yes Yes Yes Isolation 2.5 kV 2.5 kV 2.5 kV 2.5 kV 2.5 kV 2.5 kV ESD Protection +/-4 kV +/-4 kV +/-4 kV +/-4 kV +/-4 kV +/-4 kV Max. Speed (bps) 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K 115.2 K FIFO Size (bytes) 128 128 128 128 128 128 128 128 256 256 256 256 Connector Male DB-9 Male DB-9 Male DB-9 Male DB-9 Female DB-37 Female DB-37 Female DB-37 Female DB-37 Female DB-62 Female DB-62 Female DB-62 Female DB-62 Page 2-2-1 2-2-1 2-2-3 2-2-3 2-2-2 2-2-2 2-2-4 2-2-4 2-2-7 Call 2-2-8 Call
Vol. ICNP 2.0.00
2-1-4
Serial Communication Cards
2-2 Serial Communication Cards

VXC-112AU/VXC-112iAU VEX-112/VEX-112i
NEW NEW
Serial Communication Card with 2 RS-232 ports
2 2
Features

Built-in COM-Selector Provides 2 RS-232 ports +/-4 kV ESD Protection for i versions Supports PCI Express bus for VEX series 128 KB Software Buffer (max.) for Each Port Under Windows
Short Card Design 2500 Vrms Isolation for i versions Supports 3.3 V/5 V PCI bus for VXC series 128-byte Hardware FIFO for Each Port RoHS compliant & no Halogen
Hardware Specications
Models Communication Port COM1, COM2 UART Baud Rate Data Bit Stop Bit Parity FIFO Isolated General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) Universal PCI, 3.3 V/5 V, 33 MHz, 32-bit, Plug and Play Yes (8-bit DIP switch) 2 x DB-9 (Male) 100 mA @ 5 V 0 C ~ +50 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 134 mm x 90 mm x 22 mm 109 mm x 94 mm x 22 mm 480 mA @ 5 V 120 mA @ 5 V 440 mA @ 5 V PCI Express x1, Plug and Play RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND) 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 128 bytes 2500 Vrms 2500 Vrms VXC-112AU VXC-112iAU VEX-112 VEX-112i
Software
Driver for 32-bit and 64-bit Windows XP/2003/ Vista/7 Driver for Linux
Pin Assignments
Pin Assignment GND DTR TxD RxD DCD Terminal 05 04 03 02 01 No. 09 08 07 06 Pin Assignment RI CTS RTS DSR
Male DB-9 Connector
Ordering Information
VXC-112AU CR VXC-112iAU CR VEX-112 CR VEX-112i CR Universal PCI, Serial Communication Card with 2 RS-232 ports (RoHS) Universal PCI, Serial Communication Card with 2 Isolated RS-232 ports (RoHS) PCI Express, Serial Communication Card with 2 RS-232 ports (RoHS) PCI Express, Serial Communication Card with 2 Isolated RS-232 ports (RoHS)
Accessories
CA-0910F CA-0915 CA-PC09F 9-Pin Female-Female D-Sub Cable 1 m 9-Pin Male-Female D-Sub Cable, 1.5 m 9-Pin Female D-Sub Connector with Plastic Cover I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Header. Includes CA-0910F x 2 (9-Pin Female-Female D-Sub Cable 1 m)
DN-09-2F
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
VXC-114U/VXC-114iAU VEX-114/VEX-114i
NEW
VXC-114U/VXC-114iAU
VEX-114/VEX-114i
NEW
Features

2
Built-in COM-Selector Short Card Design Provides 2 RS-232 ports 2500 Vrms Isolation for i versions RoHS compliant & no Halogen
Supports 3.3 V/5 V PCI bus for U versions 128-byte Hardware FIFO for Each Port +/-4 kV ESD Protection for i versions Supports PCI Express x1 for VEX series 128 KB Software Buffer (max.) for Each Port Under Windows
2
Models Communication Port COM1 ~ COM4 UART Baud Rate Data Bit Stop Bit Parity FIFO Isolated General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) (Unit: mm) Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play Yes (8-bit DIP switch) DB-37 (Female) 120 mA @ 5 V 0 C ~ +50 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 142 x 84 x 22 133 x 93 x 22 110 x 110 x 22 880 mA @ 5 V 120 mA @ 5 V 880 mA @ 5 V PCI Express x1, Plug and Play RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND) 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 128 bytes 2500 Vrms 2500 Vrms VXC-114U VXC-114iAU VEX-114 VEX-114i
N.C. DCD3 GND CTS3 RxD3 RI4 DTR4 DSR4 RTS4 TxD4 DCD2 GND CTS2 RxD2 RI1 DTR1 DSR1 RTS1 TxD1
Pin Assignments
Pin Assignment Terminal 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 No. 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Pin Assignment RI3 DTR3 DSR3 RTS3 TxD3 DCD4 GND CTS4 RxD4 RI2 DTR2 DSR2 RTS2 TxD2 DCD1 GND CTS1 RxD1
RS-232 Female DB-37 Connector Pin Assignment GND DTR TxD RxD DCD Pin Assignment RI CTS RTS DSR
Software
Driver for 32-bit and 64-bit Windows XP/2003/Vista/7 Driver for Linux
Terminal 05 04 03 02 01
No. 09 08 07 06
VXC-114U CR VXC-114U/D2 CR VXC-114iAU CR VXC-114iAU/D2 CR VEX-114 CR VEX-114/D2 CR VEX-114i CR VEX-114i/D2 CR
RS-232 Female DB-37 to Male DB-9 Connector
Universal PCI, Serial Communication Card with 4 RS-232 ports (RoHS). Includes One CA-4002 Connector Universal PCI, Serial Communication Card with 4 RS-232 ports (RoHS). Includes One CA-9-3715D Cable Universal PCI, Serial Communication Card with 4 Isolated RS-232 ports (RoHS). Includes One CA-4002 Connector Universal PCI, Serial Communication Card with 4 Isolated RS-232 ports (RoHS). Includes One CA-9-3715D Cable PCI Express, Serial Communication Card with 4 RS-232 ports (RoHS). Includes One CA-4002 Connector PCI Express, Serial Communication Card with 4 RS-232 ports (RoHS). Includes One CA-9-3715D Cable PCI Express, Serial Communication Card with 4 Isolated RS-232 ports (RoHS). Includes One CA-4002 Connector PCI Express, Serial Communication Card with 4 Isolated RS-232 ports (RoHS). Includes One CA-9-3715D Cable
Accessories
CA-4002 CA-9-3715D CA-9-3705 37-Pin Male D-Sub Connector with Plastic Cover Male DB-37 to 4-port Male DB-9 Cable, 1.5 M (180) Male DB-37 to 4-port Male DB-9 Cable, 0.3 M (90)
Vol. ICNP 2.0.00
2-2-2
NEW
NEW
VXC-142AU/VXC-142iAU
VEX-142/VEX-142i
Serial Communication Card with 2 RS-422/485 ports
2 2
Features

Built-in COM-Selector Provides 2 RS-422/485 ports +/-4 kV ESD Protection for i versions Supports 3.3 V/5 V PCI bus for U versions RoHS compliant & no Halogen Supports pull-high/-low jumpers on RS-485 port
Short Card Design 2500 Vrms Isolation for i versions 128-byte Hardware FIFO for Each Port Supports PCI Express bus for VEX series Automatic RS-485 Direction Control
Models Communication Port RS-422/485 COM1, COM2 UART Baud Rate Data Bit Stop Bit Parity FIFO Isolated General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play Yes (8-bit DIP switch) 2 x Male DB-9 100 mA @ 5 V 0 C ~ +50 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 134 mm x 90 mm x 22 mm 110 mm x 94 mm x 22 mm 480 mA @ 5 V 120 mA @ 5 V 440 mA @ 5 V PCI Express x1, Plug and Play RS-422 RS-485 The RS-422 and RS-485 cannot be used simultaneously TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND Data+, Data-, GND (Automatic RS-485 Direction Control) 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 128 bytes 2500 Vrms 2500 Vrms VXC-142AU VXC-142iAU VEX-142 VEX-142i
Software
Pin Assignments
Pin Assignment GND/VEE RxD-(A) RxD+(B) TxD+(B)/Data+(B) TxD-(A)/Data-(A) Terminal 05 04 03 02 01 No. 09 08 07 06 Pin Assignment CTS-(A) CTS+(B) RTS+(B) RTS-(A)
RS-422/485 Male DB-9 Connector
VXC-142AU CR VXC-142iAU CR VEX-142 CR VEX-142i CR Universal PCI , Serial Communication Card with 2 RS-422/485 ports (RoHS) Universal PCI , Serial Communication Card with 2 Isolated RS-422/485 ports (RoHS) PCI Express, Serial Communication Card with 2 RS-422/485 ports (RoHS) PCI Express, Serial Communication Card with 2 Isolated RS-422/485 ports (RoHS)
Accessories
CA-0910F CA-0915 CA-PC09F 9-Pin Female-Female D-Sub Cable 1 m 9-Pin Male-Female D-Sub Cable, 1.5 m 9-Pin Female D-Sub Connector with Plastic Cover I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Header. Includes CA-0910F x 2 (9-Pin Female-Female D-Sub Cable 1 m)
DN-09-2F
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
VXC-144U/VXC-144iU VEX-144/VEX-144i
NEW
VXC-144U/VXC-144iU
VEX-144/VEX-144i
NEW
Features

2
Built-in COM-Selector Provides 2 RS-422/485 ports 2500 Vrms Isolation for i versions Short Card Design RoHS compliant & no Halogen
128-byte Hardware FIFO for Each Port Supports 3.3 V/5 V PCI Bus for U versions +/-4 kV ESD Protection for i versions Supports pull-high/-low jumpers on RS-485 port Supports PCI Express x1 for VEX series Automatic RS-485 Direction Control
2
Models Communication Port COM1 ~ COM4 UART Baud Rate Data Bit Stop Bit Parity FIFO Isolated General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) (Unit: mm) Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play Yes (8-bit DIP switch) Female DB-37 120 mA @ 5 V 0 C ~ +50 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 142 x 84 x 22 142 x 95 x 22 114 x 101 x 22 880 mA @ 5 V 120 mA @ 5 V 880 mA @ 5 V PCI Express x1, Plug and Play RS-422/485 RS-422 RS-485 The RS-422 and RS-485 cannot be used simultaneously TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND Data+, Data-, GND (Automatic RS-485 Direction Control) 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 128 bytes 2500 Vrms 2500 Vrms VXC-144U VXC-144iU VEX-144 VEX-144i
N.C.
Pin Assignments
Pin Assignment Terminal 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 No. 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Pin Assignment CTS3-(A) RxD3-(A) RTS3-(A) RTS3+(B) RxD3+(B)
TxD4-(A)/Data4-(A)
TxD3-(A)/Data3-(A)
GND CTS3+(B)
TxD3+(B)/Data3+(B)
CTS4-(A) RxD4-(A) RTS4-(A) RTS4+(B) RxD4+(B)

TxD2-(A)/Data2-(A)
GND/VEE4 CTS4+(B)
TxD4+(B)/Data+(B)

TxD1-(A)/Data1-(A)
GND/VEE2 CTS2+(B)
TxD2+(B)/Data2+(B)
GND/VEE1 CTS1+(B)
TxD1+(B)/Data1+(B)
RS-422/485 Female DB-37 Connector Pin Assignment GND/VEE RxD-(A) RxD+(B)

TxD+(B)/Data+(B) TxD-(A)/Data-(A)
Terminal 05 04 03 02 01
No. 09 08 07 06
Pin Assignment CTS-(A) CTS+(B) RTS+(B) RTS-(A)
Software
Driver for 32-bit and 64-bit Windows XP/2003/Vista/7 Driver for Linux
RS-422/485 Female DB-37 to Male DB-9 Connector
VXC-144U CR VXC-144iU CR VEX-144 CR VEX-144i CR Universal PCI, Serial Communication Card with 4 RS-422/485 ports (RoHS). Includes One CA-4002 Connector Universal PCI, Serial Communication Card with 4 Isolated RS-422/485 ports (RoHS). Includes One CA-4002 Connector PCI Express, Serial Communication Card with 4 RS-422/485 ports (RoHS). Includes One CA-4002 Connector PCI Express, Serial Communication Card with 4 Isolated RS-422/485 ports (RoHS). Includes One CA-4002 Connector
Accessories
Vol. ICNP 2.0.00
2-2-4
VXC-182iU
NEW
Serial Communication Card with 1 Isolated RS422/485 port and 1 RS-232 port
2 2
Features

Built-in COM-Selector Provides 1 RS-422/485 port and 1 RS-232 Port 2500 Vrms Isolated RS-422/485 Port Supports 3.3 V/5 V PCI bus, Plug and Play Up to 128 KB Software FIFO for Each Port Under Windows
Short Card Design +/-4 kV ESD Protection 128-byte Hardware FIFO for Each Port Automatic RS-485 Direction Control RoHS compliant & no Halogen
Communication Port RS-422/485 COM1 COM2 UART Baud Rate Data Bit Stop Bit Parity FIFO General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play mechanism Yes (8-bit DIP switch) 2 x DB-9 (Male) 200 mA @ 5 V 0 C ~ +50 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 134 mm x 90 mm x 22 mm RS-422 RS-485 The RS-422 and RS-485 cannot be used simultaneously TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND (with 2.5 kV Isolation) Data+, Data-, GND (with 2.5 kV Isolation) RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND) 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 128 bytes
Software
Pin Assignments
Pin Assignment GND/VEE RxD-(A) RxD+(B) TxD+(B)/Data+(B) TxD-(A)/Data-(A) Terminal 05 04 03 02 01 No. 09 08 07 06 Pin Assignment CTS-(A) CTS+(B) RTS+(B) RTS-(A)
VXC-182iU CR Universal PCI Bus, Serial Communication Card with 1 Isolated RS-422/485 port and 1 RS-232 port (RoHS)
RS-422/485 Male DB-9 Connector
Accessories
CA-0910F CA-0915 CA-090910 CA-PC09F DN-09-2F 9-Pin Female-Female D-Sub Cable 1 m 9-Pin Male-Female D-Sub Cable, 1.5 m 9-Pin Female D-Sub Cable for RS-422 Connector, 1 m 9-Pin Female D-Sub Connector with Plastic Cover I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Header. Includes CA-0910F x 2 (9-Pin Female-Female D-Sub Cable 1 m)
Pin Assignment GND DTR TxD RxD DCD
Terminal 05 04 03 02 01
No. 09 08 07 06
Pin Assignment RI CTS RTS DSR
COM2: RS-232 Male DB-9 Connector
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
VXC-164AU
Available soon
Serial Communication Card with 4 RS-232/422/485 ports
Features

2
Automatic RS-485 Direction Control Provides 4 RS-232/422/485 ports Short Card Design RoHS compliant & no Halogen
Supports 128-byte Supports Supports
3.3 V/5 V PCI Bus Hardware FIFO for Each Port Pull-high/-low jumpers on RS-485 port COM-Selector (DIP Switch)
2
Communication Port RS-232 COM1 ~ COM4 RS-422/485 RS-422 RS-485 UART Baud Rate Data Bit Stop Bit Parity FIFO General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play Yes (8-bit DIP switch) Female DB-37 120 mA @ 5 V 0 C ~ +50 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 142 mm x 84 mm x 22 mm RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND) The RS-422 and RS-485 cannot be used simultaneously TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND Data+, Data-, GND (Automatic RS-485 Direction Control) 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 128 bytes
Pin Assignments
Pin Assignment RS-232 N.C. DCD3 GND CTS3 RxD3 RI4 DTR4 DSR4 TRS4 TxD4 DCD2 GND CTS2 RxD2 RI1 DTR1 DSR1 RTS1 TxD1 CTS3+(B) TxD3+(B)/Data3+(B) CTS4-(A) RxD4-(A) RTS4-(A) RTS4+(B) RxD4+(B) TxD2-(A)/Data2-(A) GND/VEE2 CTS2+(B) TxD2+(B)/Data2+(B) CTS1-(A) RxD1-(A) RTS1-(A) RTS1+(B) RxD1+(B) TxD3-(A)/Data3-(A) RS-422/485 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Terminal No. Pin Assignment RS-422/485 CTS3-(A) RxD3-(A) RTS3-(A) RTS3+(B) RxD3+(B) TxD4-(A)/Data4-(A) GND/VEE4 CTS4+(B) TxD4+(B)/Data+(B) CTS2-(A) RxD2-(A) RTS2-(A) RTS2+(B) RxD2+(B) TxD1-(A)/Data1-(A) GND/VEE1 CTS1+(B) TxD1+(B)/Data1+(B) RS-232 RI3 DTR3 DSR3 RTS3 TxD3 DCD4 GND CTS4 RxD4 RI2 DTR2 DSR2 RTS2 TxD2 DCD1 GND CTS1 RxD1
RS-232/422/485 Female DB-37 Connector
Terminal No. Pin Assignment Pin Assignment
Software
GND/VEE RxD-(A) RxD+(B) TxD+(B)/Data+(B) TxD-(A)/Data-(A)
05 04 03 02 01
09 08 07 06
CTS-(A) CTS+(B) RTS+(B) RTS-(A)
VXC-164AU CR Universal PCI, Serial Communication Card with 4 RS-232/422/485 ports (RoHS). Includes one CA-4002 Connector Universal PCI, Serial Communication Card with 4 RS-232/422/485 ports (RoHS). Includes one CA-9-3715D Cable
Terminal No. Pin Assignment Pin Assignment
VXC-164AU/D2 CR
GND DTR TxD RxD DCD
05 04 03 02 01
09 08 07 06
RI CTS RTS DSR
Accessories
Vol. ICNP 2.0.00
2-2-6
VXC-118U VEX-118
Available soon Available soon
VXC-118U
VEX-118
2 2
Features

Supports 3.3 V/5 V PCI Bus for VXC-118U PCI Express x1, Plug & Play for VEX-118 Provides 8 RS-232 ports 256-byte Hardware FIFO for Each Port Built-in COM-Selector
128 KB software Buffer (max.) for each COM port under Windows Supports COM-Selector (DIP Switch) Short Card Design RoHS compliant & no Halogen
Models Communication Port COM1 ~ COM8 UART Baud Rate Data Bit Stop Bit Parity FIFO General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) 3.3 V/ 5 V Universal PCI, 32-bit, 33 MHz Yes (8-bit DIP switch) Female DB-62 120 mA @ 5 V 0 C ~ +60 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 132 mm x 121 mm x 22 mm PCI Express x1 RS-232 RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND) 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 256 bytes
1
Pin Assignments
VEX-118
Terminal No.
VXC-118U
Pin Assignment TxD_0 DTR_0 RxD_1 DSR_1 DCD_1 TxD_2 DTR_2 RxD_3 DSR_3 DCD_3 RxD_4 DSR_4 DCD_4 TxD_5 DTR_5 RxD_6 DSR_6 DCD_6 RxD_7 DSR_7 DCD_7
Terminal No.
Pin Assignment RxD_0 DSR_0 DCD_0 TxD_1 DTR_1 RxD_2 DSR_2 DCD_2 TxD_3 DTR_3 GND TxD_4 DTR_4 RxD_5 DSR_5 DCD_5 TxD_6 DTR_6 GND TxD_7 DTR_7 CON1
Terminal No.
Pin Assignment CTS_0 RTS_0 GND CTS_1 RTS_1 CTS_2 RTS_2 GND CTS_3 RTS_3 CTS_4 RTS_4 GND CTS_5 RTS_5 GND CTS_6 RTS_6 CTS_7 RTS_7 NC N.C.
01
22 43
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 21
02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18
21
42
62
19 20 21
Software
Driver for 32-bit Windows XP/2003/Vista/7 Driver for 64-bit Windows XP/2003/Vista/7
5 4 3 2 9 8 7 6
Terminal No. 01 02 03 04 05 06 07 08 09 DCD RxD TxD DTR GND DSR RTS CTS -
Pin Assignment
VXC-118U CR VEX-118 CR Universal PCI, Serial Communication Card with 8 RS-232 ports. (RoHS) PCI Express, Serial Communication Card with 8 RS-232 ports. (RoHS)
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
VXC-148U-5w VEX-148-5w
VXC-148U-5w
VEX-148-5w
2
Features

2

Supports 3.3 V/5 V PCI Bus for VXC-148U-5w PCI Express x1, Plug & Play for VEX-148-5w Provides 8 RS-422/485 ports 256-byte Hardware FIFO for Each Port Built-in COM-Selector
128 KB software Buffer (max.) for each COM port under Windows Supports COM-Selector (DIP Switch) Short Card Design RoHS compliant & no Halogen
Models Communication Port COM1 ~ COM8 UART Baud Rate Data Bit Stop Bit Parity FIFO General Bus Type COM-Selector Connector Power Consumption Operating Temperature Storage Temperature Humidity Dimensions (L x W x D) 3.3 V/ 5 V Universal PCI, 32-bit, 33 MHz Yes (8-bit DIP switch) Female DB-62 120 mA @ 5 V 0 C ~ +60 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 128 mm x 121 mm x 22 mm
21
Pin Assignments
VEX-148-5w
Terminal No.
VXC-148U-5w
Pin Assignment RxD0+ RxD0TxD1+/Data1+ TxD1-/Data1RxD2+ RxD2TxD3+/Data3+ TxD3-/Data3TxD4+/Data4+ TxD4-/Data4RxD5+ RxD5TxD6+/Data6+ TxD6-/Data6TxD7+/Data7+ TxD7-/Data7-
Terminal No.
Pin Assignment TxD0+/Data0+ TxD0-/Data0RxD1+ RxD1TxD2+/Data2+ TxD2-/Data2RxD3+ RxD3GND RxD4+ RxD4TxD5+/Data5+ TxD5-/Data5RxD6+ RxD6GND RxD7+ RxD7CON1
Terminal No.
Pin Assignment GND GND GND GND NC N.C.
RS-422/485 RS-422 RS-485
The RS-422 and RS-485 cannot be used simultaneously TxD+, TxD-, RxD+, RxD-, GND Data+, Data-, GND 16C950 compatible 50 ~ 115200 bps 5, 6, 7, 8 1, 1.5, 2 None, Even, Odd, Mark, Space Internal 256 bytes
1
01
22 43
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 21
02 03 04 05 06 07 08 09 10 11
PCI Express x1
12 13 14 15 16 17 18
42 62
19 20 21
Software
Driver for 32-bit Windows XP/2003/Vista/7 Driver for 64-bit Windows XP/2003/Vista/7
5 4 3 2 9 8 7 6
Terminal No. 01 02 03 04 05 06 07 08 09 TxD-/DataTxD+/Data+ RxD+ RxDGND -
Pin Assignment
VXC-148U-5w CR VEX-148-5w CR Universal PCI, Serial Communication Card with 8 RS-422/485 ports. (RoHS) PCI Express, Serial Communication Card with 8 RS-422/485 ports. (RoHS)
Vol. ICNP 2.0.00
2-2-8
Applications
2-3 Applications
2 3
ICP DAS CO., LTD.
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. ICNP 2.0.00
2 3
Vol. ICNP 2.0.00
Applications
2 3
ICP DAS CO., LTD.
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. ICNP 2.0.00
1.1
P1-1-1
3-1 3-2 3-3 3-4 3-5
Overview ----------------------------------------------------------------------------3-1-1 Palm-size Programmable Serial-to-Ethernet Device Server -------------------3-2-1 Palm-size Serial-to-Ethernet Device Server -------------------------------------3-3-1 IP67 Programmable Serial-to-Ethernet Device Server -------------------------3-4-1 Modular Programmable Serial-to-Ethernet Device Server ---------------------3-5-1
Programmable Device Server with I/O Expansion Slot(s) Communication I/O Modules -----------------------------------------------------------3-5-1 ---------------------------------------------------------------------------------------------3-5-6
3-6 3-7 3-8 3-9
Programmable Serial-to-Fiber Device Server -----------------------------------3-6-1 Tiny Serial-to-Ethernet Device Server & Modbus Gateway --------------------3-7-1 Programmable Serial Device Server with LAN Switch --------------------------3-8-1 Programmable Modbus to Ethernet Gateway -----------------------------------3-9-1
Overview
3-1 Overview
3 1
Serial Device Server 3-1-1
Serial Devices to Ethernet Gateway

The ICP DAS Programmable Device Server is designed to bring network connectivity to your serial devices. The programmable features allow developers to quickly build custom applications that turn dull serial devices into intelligent devices right away without modifying their hardware or software conguration. With extensive experience accumulated over many years, a great number of serial devices such as PLCs, bar code readers, RFID readers, meters and motion controllers, etc., have been widely used in various applications. As the advances in communication technologies in recent years, continue to drive optimization of data accessibility and remote operation ability, a wide variety of industries have begun to feel the urge to upgrade their latency serial communications to Ethernet network connections. The ICP DAS PDS series of products are your best choice for implementing this scenario in a robust, reliable and cost-effective way.
The VxComm Driver creates virtual COM port(s) on 32-bit and 64-bit Windows XP/2003/Vista/7 systems and maps them to the remote serial port(s) of the PDS/ DS series. The user's serial client programs need to only be changed to the virtual COM port access the serial devices that are allocated on the Internet or Ethernet network via the PDS/DS series.
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Easy Serial Device Networking with transparency The most intuitive and easiest way to remotely control serial devices is to access those devices transparently via a network with no software modication required. The ICP DAS PDS product line offers two transparent applications:
Socket Connections: Using a TCP/IP socket connection, client programs can exchange information with specic PDS/DS serial ports and talk to serial devices directly. For example, simply create a socket connection to the TCP/IP port 10001 (default) of the PDS/DS device and you can then access Port1 of the PDS/DS remotely. This is an OS-independent method and works well on most OS (operating systems) that provide socket functions. Virtual COM Ports: ICP DAS developed a specic function called "Virtual COM" that simulates PDS serial ports as xed PC COM ports. Virtual COM ports appear to the system and applications as real ports. Once established, users can immediately enjoy the convenience that networking provides.
3 1
DynaCOM Technology ICP DAS Virtual COM also supports an exclusive function - Dynamic Virtual COM Mapping (DynaCOM); if the system can only access limited or xed numbers of COM Ports, specic PDS serial ports can be dynamically assigned to the corresponding COM port numbers.
Vol. ICNP 2.0.00
3-1-2
Overview
Programmable Enhanced Device Servers The programmable features of the PDS series of products makes it possible to effectively implement exclusive protocols and exclusive communication mechanisms for complex PDS-based applications. This provides the following advantages:
Effective network transmission: Place your customized software on the PDS to directly perform processes locally. The effective data and information can be periodically sent back to the PC based on a schedule that can be planned in advance and the devices will work independently onsite, even when not connected to a network. Therefore, the design of system can be much more flexible. This also reduces the need to rely on the network, which is an inevitable factor for conventional DS (Device Server) as it has to keep on talking to the PC via the network to ensure the status maintains transparency. Previous development efforts can be duplicated: Along with serial devices, you can place your customized or value-added software on the PDS to implement an intelligent Ethernet controller. This controller can then be used in applications for future projects, dramatically reducing programming requirements. In addition, your value-added software is embedded in the PDS, so if a computer system undergoes hardware replacement or upgrade, incompatibility issues dont need to be considered, which therefore reduces system maintenance work.
3 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Virtual I/O Highly Integrates On-Site Messages I/O acquisition is very important when performing on-site integration. The RS-485 port of PDS is able to be connected to I/O devices, like I-7000/M-7000 series, to offer abundant I/O functions for various purposes. For easier on-site integration, some PDS models also provide Digital I/O, which is also supported by the ICP DAS DCON utility, EZ Data Logger or other DCON client programs.
"Vir tual I/O" is an extension of "Vir tual COM" technology that simulates the PDS's digital I/Os control as a virtual COM port (Port I/O) application on the PC. You are now able to access the PDS's digital I/ Os using the DCON protocol through the virtual COM port. In addition, the DCON utility and EZ Data Logger also support control of the PDS's digital I/Os through the use of "Virtual I/O" technology, so you can monitor PDS's digital I/Os and complete the I/Os application in a convenient way.
3 1
Vol. ICNP 2.0.00
Overview
ESD Protection and Frame Ground The PDS series offers TVS diode ESD protection technology with a frame ground design that protects your system from being damaged by high potential voltages.
Z in Transient Current TVS Diode PROTECTED CIRCUIT
ESD (Eelectro-Static Discharge)
Frame Ground Provides a path for the ESD to the Earth Ground
3 1
C Frame Ground
Earth Ground
Under normal operating conditions, the TVS diode presents high impedance (appears as an open circuit) to the protected component. If the voltage exceeds the limitation, the TVS diode avalanches, providing a low impedance path for the transient current. As a result, the transient current is diverted away from the protected components and shunted through the TVS diode. The device returns to a high impedance state after the transient threat has passed. Self-Tuner Inside The PDS series is equipped with a Self-Tuner chip that automatically controls the sending/receiving direction of the RS-485 ports. Without the presence of Self-Tuner, users need to enable the RS-485 transmitter before transmitting, and disable the transmitter after the transmission is complete. The time required to enable and disable the transmitter (direction control) is the major source of many communication issues, and it is very difcult to debug. The built-in Self-Tuner in the PDS effectively removes this direction control issue and also simplies the software/rmware programming required for communication applications. Easy Web Conguration The PDS also contains a built-in web server that enables users to conveniently configure the PDS. A web browser, like IE or Firefox, can be used to connect to the PDS to modify the conguration, such as: IP address, subnet mask, gateway, DHCP client, UDP search, Web Server, Telnet Server, TCP ACK delay, Watchdog timeout, Master IP, Filter IP, COM port baud rate, data format and transfer mode, etc. Master IP and Filter IP (White List) The PDS can use a master IP setting that allows a client to configure the PDS and COM ports. This prevents the configuration of the PDS and COM ports from being changed by other clients. The IP lter setting limits which client PCs are able to access the PDS module via specic IP addresses. Connections from other clients will be rejected by the PDS.
! Change Setting ! Access Ports Master IP NS-208 ! Access Ports IP Filter (White List) PDS-700
Connections are rejected by PDS-700
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Selection Guide
Comparison Table of Device Server and Modbus Gateway
Features
Virtual COM Programmable PoE Modbus Gateway Multi-client Remarks
PPDS
Yes Yes Yes Yes Yes Professional
PDS
Yes Yes Yes Powerful
DS
Yes Yes Isolation for DS-715
tDS
Yes Yes Cost-effective, Entry-level
tGW
Yes Yes Cost-effective, Entry-level
3 1
PPDS Series Programmable Device Server and Modbus Gateway with PoE
Series PPDS-700-MTCP Yes PPDSM-700-MTCP 10/100 M, PoE Yes Yes Yes Metal Ethernet Virtual COM Virtual I/O Programmable Modbus Casing Fire-Retardant Plastic
PPDS-700-IP67
IP67 Waterproof Plastic
PDS Series Programmable Device Server

Series PDS-700 10/100 M PDSM-700 10/100 M Ethernet Switch Yes PDS-8x2 Dual 10/100 M Ethernet PDS-220Fx 100 Base-FX, Fiber 10/100 M Ethernet Switch Yes Fire-Retardant Plastic Yes Fire-Retardant Plastic Yes Metal Ethernet Virtual COM Virtual I/O Programmable Modbus Casing Fire-Retardant Plastic
PDS-8x1
PDS-5000-MTCP
DS, tDS & tGW Series Non-Programmable Device Server and Modbus Gateway
Series DS-700 Ethernet 10/100 M Yes tDS-700 10/100 M, PoE tGW-700 Yes Virtual COM Virtual I/O Multi-client Yes FireRetardant Plastic Modbus Casing Remarks Isolation for DS-715
Cost-effective
Vol. ICNP 2.0.00
3-1-6
Palm-size Programmable Serial-to-Ethernet Device Server
3-2 Palm-size Programmable Serial-to-Ethernet Device Server

PDS-720(D) PPDS-720(D)-MTCP
Programmable Device Server with 1 RS-232 port and 1 RS-485 port
PPDS-720D-MTCP PDS-720
3 2

PDS-782-25/D6 PDS-782D-25/D6
Programmable Device Server with 7 RS-232 ports and 1 RS-485 port
PDS(M)-700(D) Series PPDS(M)-700(D)-MTCP Series

Programmable Device Server with 1 RS-232 port and 1 RS-485 port
PPDS-700D-MTCP series
PDSM-700D series
Features
Incorporates serial devices in an Ethernet network Provides Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Supports Modbus TCP to RTU/ASCII Gateway (for MTCP versions) Powerful programmable device server with lib and sample programs Built-in high performance MiniOS7 from ICP DAS Built-in watchdog timer suitable for use in harsh environments Built-in Self-Tuner on RS-485 Ports (automatic direction control) Supports +/- 4 kV ESD protection on serial ports Power reverse polarity protection and low power consumption 10/100 Base-TX Ethernet, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator) Supports PoE (Power over Ethernet, for PPDS versions) Built-in 7-Segment 5-digit LED display (for D versions) Supports D/I, latched D/I and counter functions (for models with DIO) Supports Virtual I/O technology (for models with DIO) Supports IP lter (White List) for security control Supports multi-client and data sharing function Palm-size form factor with multiple serial ports and DIN-Rail mounting Made from re-retardant materials (UL94-V0 Level) RoHS Compliant & no Halogen OEM/ODM service is available
3-2-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Introduction
The PDS-700/PPDS-700-MTCP series is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/422/485 devices to an Ethernet network. The user-friendly VxComm Driver/ Utility allows users to easily turn the built-in COM ports of the PDS-700/PPDS-700-MTCP series into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high exibility, the PDS-700/PPDS-700-MTCP series is able to meet the demands of every network-enabled application. The PDS-700/PPDS-700-MTCP series includes a powerful and reliable Xserver programming structure that allows you to quickly and easily build your robust Ethernet applications. The built-in, high-performance MiniOS7 boots the PDS-700/PPDS700-MTCP up in just one second and gives you fastest responses. These modules also provide advanced features like data sharing and UDP ood attack protection as follows: Data Sharing with Multiple Clients M0: Transparent Mode (Multi-echo) In transparent mode, the PDS sends data from a serial device to each client that is connected to the same serial port of the PDS. Thus, each connected client has a copy of the same data from the serial device. M1: Slave Mode (Single-echo) In slave mode, the PDS only sends data from a serial device to the client that requires the service. If there are no requirements from the client, then data will not be sent to the client. The PDS services each client individually when sharing data from the serial device, but the clients do not have a copy of the same data. UDP Flood Attack Protection A UDP flood attack is a denial-of-service (DoS) attack that sends a large number of UDP packets to a remote host. As a result, the affected system will be forced into replying to many packets, eventually causing the host to be unreachable by other clients. The UDP function can be disabled on the PDS if the network suffers a ood attack or receives a large numbers of UDP packets from the network devices. This protects the PDS from UDP ood attacks. T h e P P D S - 7 0 0 - M TC P s e r i e s f e a t u r e s t r u e I E E E 802.3afcompliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS205PSE. The PPDS-700-MTCP also works as a Modbus/ TCP to RTU/ASCII gateway that supports most SCADA/ HMI communications based on the Modbus/TCP protocol. The removable onboard terminal block connector is designed for easy and robust wiring in industrial situations.
Single-Board Computer (SBC)
erial Device Serial Multi-client sharing a data source NS-208 Ethernet PDS-700
3 2
Total 32 TCP Sockets
Client A
Client B
Client C
NS-208 Ethernet
PDS-700
VCOM12 Applications VCOM13 VCOM14 VCOM15
Device
Device
Device
Device
UDP Broadcast
DVB Carrier (Digital Video Broadcast) S75 DVB-S Satellite Data Receiver
Applications
Factory Automation
NS-208 Ethernet PDS-700 (IP-1) PPDS-700-MTCP (IP-n) Power Supply 7000 #01 7000 #FF
...
Building Automation
PC + VxComm
Home Automation
7000 #01 PoE NS-205PSE

...
7000 #FF
COM2 COM1
COM3 COM4
COM2 COM1
COM254 COM255
Vol. ICNP 2.0.00
3-2-2
3 2
Selection Guide
Model Name RS-232 RS-485 RS-422/ RS-485 DI/DO Ethernet COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8
PDS-720(D) PPDS-720(D)-MTCP
10/100 M
5-wire RS-232
2-wire RS-485
PDS(M)-721(D) PPDS(M)-721(D)-MTCP
6/7
10/100 M
5-wire RS-232
2-wire RS-485
4/4
10/100 M
5-wire RS-232
2-wire RS-485
5-wire RS-232
4/4
10/100 M
5-wire RS-232
2-wire RS-485
RS-422/ RS-485
10/100 M
5-wire RS-232
2-wire RS-485
5-wire RS-232
9-wire RS-232
4/4
10/100 M
5-wire RS-232
2-wire RS-485
3-wire RS-232
3-wire RS-232
10/100 M
5-wire RS-232
2-wire RS-485
5-wire RS-232
5-wire RS-232
5-wire RS-232
10/100 M
5-wire RS-232
2-wire RS-485
2-wire RS-485
2-wire RS-485
2-wire RS-485
1/2
10/100 M
5-wire RS-232
2-wire RS-485
3-wire RS-232
3-wire RS-232
3-wire RS-232
3-wire RS-232
10/100 M
5-wire RS-232
2-wire RS-485
3-wire RS-232
3-wire RS-232
3-wire RS-232
3-wire RS-232
3-wire RS-232
3-wire RS-232
PDS-782(D)-25/D6
10/100 M
5-wire RS-232
2-wire RS-485
3-wire RS-232
3-wire RS-232
3-wire RS-232
3-wire RS-232
3-wire RS-232
3-wire RS-232
Note: 1. The D version modules have a built-in 7-Seg. LED Display. 2. The M version modules use metal case. 3. The PPDS-700-MTCP series modules support PoE (Power over Ethernet) and Modbus Gateway.
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
System Specications
CPU CPU SRAM Flash Memory 80186, 80 MHz or compatible 512 KB Flash ROM: 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles Yes
EEPROM Built-in Watchdog Timer Communication Interface Ethernet PoE COM Port Formats Data Bit Parity Stop Bit Baud Rate LED Indicators 5-digit 7 Segment System PoE Power Protection Required Supply Voltage PDS(M)-700(D) Series PPDS(M)-700(D)-MTCP Series D versions (LED display) Others COM1 ~ COM8 COM1 and COM2 COM3 ~ COM8
10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator) IEEE 802.3af (PPDS(M)-700(D)-MTCP series only)
7, 8 5, 6, 7, 8 None, Even, Odd, Mark, Space 1, 2 115200 bps max.
3 2
Yes (D versions only) Red Green (PPDS(M)-700(D)-MTCP series only)
Power Reverse Polarity Protection +10 VDC ~ +30 VDC (non-regulated) PoE or +12 VDC ~ +48 VDC (non-regulated) 2.9 W 2.2 W
Power Consumption Mechanical Flammability
M versions (Metal case) Others M versions (Metal case) Others
Metal Plastic Fire-Retardant Materials (UL94-V0 Level) 88 mm x 123 mm x 28 mm 72 mm x 123 mm x 35 mm DIN-Rail or Wall mounting
Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity
-25 C ~ +75 C -40 C ~ +80 C 5 ~ 90% RH, non-condensing
I/O Specications
Digital Output Output Type Load Voltage Load Current Isolated Voltage Digital Input Input Type Off Voltage Level On Voltage Level Isolated Voltage Max. Count Counters Max. Input Frequency Min. Pulse Width Source (Dry Type), Common Ground +1 V max. +3.5 ~ +30 V Non-isolated 16-bit (65535) 100 Hz 5 ms Open Collector (Sink/NPN) 30 VDC, max. 100 mA, max. Non-isolated
Vol. ICNP 2.0.00
3-2-4
Pin Assignments
PDS(M)-700(D) & PPDS(M)-700(D)-MTCP Series PDS(M)-721(D) & PPDS(M)-721(D)-MTCP
Terminal No.
Pin Assignment Link/Act
Terminal No. 23 22 21 20 19 18 17 16 15 DO 14 13 12 11 10
Pin Assignment DI0 DI1 DI2 DI3 DI4 DI5 DO.PWR DO0 DO1 DO2 DO3 DO4 DO5 DO6
E1 10/100M
RUN
DI
Sys.
01 COM1 02 03 04 05 06 07 08 09
CTS1 RTS1 RxD1 TxD1 INIT* D2+ D2(R)+Vs (B)GND
IN.COM
2
E1 (PoE)
PDS(M)-732(D) & PPDS(M)-732(D)-MTCP
(B)GND
(R)Vs+
E1
IN3
IN2
IN0
IN5
IN4
IN1
COM2
Terminal No. 23 22 DO 21 20 19 18 17 DI 16 15 14 13 COM3 12 11 10
Pin Assignment DO3 DO2 DO1 DO0 DO.PWR GND DI3 DI2 DI1 DI0 RxD3 TxD3 RTS3 CTS3
Terminal No. 23 22 DO 21 20 19 18 17 DI 16 15 14 13 COM3 12 11 10
Pin Assignment DO3 DO2 DO1 DO0 DO.PWR GND DI3 DI2 DI1 DI0 RxD3RxD3+ TxD3-/D3TxD3+/D3+
Terminal No. 23 22 21 20 COM4 19 18 17 16 15 14 13 COM3 12 11 10
Pin Assignment DI4 DCD4 DTR4 DSR4 CTS4 RTS4 TxD4 RxD4 GND4 GND3 RxD3 TxD3 RTS3 CTS3
Terminal No. 23 22 DO 21 20 19 18 17 DI 16 15 14 COM3 COM4 13 12 11 10
Pin Assignment DO3 DO2 DO1 DO0 DO.PWR GND DI3 DI2 DI1 DI0 TxD3 RxD3 TxD4 RxD4
Terminal No. 23 COM5 22 21 20 19 18 COM4 17 16 15 14 13 COM3 12 11 10
Pin Assignment RxD5 TxD5 RTS5 CTS5 GND RxD4 TxD4 RTS4 CTS4 GND RxD3 TxD3 RTS3 CTS3
Terminal No. COM5 23 22 21 20 19 18 COM4 17 16 15 14 13 12 COM3 11 10
Pin Assignment DATA+ DATA----DATA+ DATA----DATA+ DATA-
Terminal No. 23 DO DI 22 21 20 19 COM6 COM5 18 17 16 15 14 COM4 COM3 13 12 11 10
Pin Assignment DO0 DO1 DO.PWR DI0 GND TxD6 RxD6 TxD5 RxD5 GND TxD4 RxD4 TxD3 RxD3
Terminal No. COM8 COM7 23 22 21 20 19 COM6 COM5 18 17 16 15 14 COM4 COM3 13 12 11 10
Pin Assignment TxD8 RxD8 TxD7 RxD7 GND TxD6 RxD6 TxD5 RxD5 GND TxD4 RxD4 TxD3 RxD3
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
PDS-782(D)-25/D6
Pin Assignment
Terminal
No.
Pin Assignment
Pin Assignment GND -TxD RxD --
Terminal 05 04 03 02 01
No. 09 08 07 06
Pin Assignment -----
N/A N/A GND N/A GND N/A GND N/A GND N/A GND N/A GND
01 02 03 04 05 06 07 08 09 10 11 12 13
14 15 16 17 18 19 20 21 22 23 24 25 Shield
COM8_RxD COM8_TxD COM7_RxD COM7_TxD COM6_RxD COM6_TxD COM5_RxD COM5_TxD COM4_RxD COM4_TxD COM3_RxD COM3_TxD F.G.
3 2
25-Pin Male D-Sub Connector
Wiring
DATA+(B) Device 1 DATA+(B) DATA-(A) FGND Device 2 DATA+(B) DATA-(A) FGND Device 3 DATA-(A) FGND RS-422 Device RxD+(B) RxD-(A) TxD+(B) TxD-(A) GND FGND
GND
GND
2-wire Only Device
3-wire RS-232 Wiring RS-232 Master TxD RxD GND FGND RS-232 Device RxD TxD GND FGND
Output Type
DO Command as 1 Relay ON
DO Command as 0 Relay Off
GND
Input Type
DI Value as 0
Relay ON
DI Value as 1 Relay Off

DIx DIx
Relay Open
Drive Relay
+ -
DO.PWR DOx DO.GND
+ -
DO.PWR DOx DO.GND
Relay Contact
Relay Close
GND
GND
Voltage < 1V
TTL/CMOS Logic
Logic Level Low Logic GND
Voltage > 3.5V

DIx GND
Logic Level High Logic GND
DIx GND
Resistance Load
+ -
+ -
DO.PWR DOx DO.GND
+ -
+ -
DO.PWR DOx DO.GND
Open Collector On Open Collector

On
Open Collector Off

Off
DIx GND
DIx GND
Vol. ICNP 2.0.00
3-2-6
Models
PDS P
PoE
M M
Metal
- 7 - 7
D D
LED Display
CR - MTCP
Modbus/TCP
PDS
Programmable Device Server
CR
RoHS
RS-232 RS-485 RS-422/485
DI/DO
Includes Cable
P D S - 7 2 0 D
CR
P P D S - 7 2 0 D -MTCP CR PDS M -721 D CR
1 RS-232 1 RS-485
1 CA-0910
PPDS M -721 D -MTCP CR
1 RS-232 1 RS-485
6/7
1 CA-0910
3 2
PDS
M -732 D
CR
PPDS M -732 D -MTCP CR PDS M -734 D CR
2 RS-232 1 RS-485 1 RS-232 1 RS-485 1 RS-422/485 3 RS-232 1 RS-485
4/4
1 CA-0910
4/4
1 CA-0910
1 CA-0910
3 RS-232 1 RS-485
4/4
1 CA-0910
4 RS-232 1 RS-485
1 CA-0910
1 RS-232 4 RS-485
1 CA-0910
5 RS-232 1 RS-485
1/2
1 CA-0910
PPDS M -782 D -MTCP CR
7 RS-232 1 RS-485
1 CA-0910
P D S - 7 8 2 D -25/D6 CR
Note: 1. PPDS(M)-700(D)-MTCP supports PoE and Modbus Gateway. 2. D versions support 7-segment 5-digit LED display. 3. M versions is equipped with metal case.
7 RS-232 1 RS-485
1 CA-0910 1 CA-9-2505D
Accessories
GPSU06U-6 MDR-20-24 DIN-KA52F-48 CA-0903 CA-0910 CA-9-2505D NS-205 CR DN-09-2 DN-09-2F 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 48 VDC/0.52 A, 25 W Power Supply with DIN-Rail Mounting 9-Pin Female D-Sub and RS-232 Connector Cable, 30 cm Cable 9-Pin Female D-Sub and 3-wire RS-232 Cable, 1 m Cable DB-25 Male (D-Sub) to 6-port DB-9 Male (D-Sub) Cable Unmanaged 5-port Industrial Ethernet Switch (RoHS) I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Headers. Includes CA-0915 x 2 (9-Pin Male-Female D-Sub Cable 1.5 m) I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Headers. Includes CA-0910F x 2 (9-Pin Female-Female D-Sub Cable 1.0 m)
NS-205PSE CR Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
3-2-7
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
3-3 Palm-size Serial-to-Ethernet Device Server

DS-712
NEW Available soon
PPDS-712-MTCP DS-712
PPDS-712-MTCP
Serial-to-Ethernet Device Server with 1 RS-232 port
Features

Incorporate Serial Devices in an Ethernet network Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Watchdog Timer suitable for use in harsh environments 10/100 Base-TX, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator) Built-in High Performance MiniOS7 from ICP DAS PPDS-712-MTCP supports Modbus/TCP and Modbus/RTU PPDS-712-MTCP supports PoE (IEEE 802.3af, Class 1) Made from re-retardant materials (UL94-V0 Level)
"Virtual COM" extends PC COM ports High Performance Device Server Power Reverse Polarity Protection RoHS Compliant & no Halogen Serial Port +/-4 kV ESD Protection Circuit Low power consumption Palm-Size with DIN-Rail Mounting Male DB-9 Connector
3 3
Introduction
The DS-700 is a series of Serial-to-Ethernet Device Servers that are designed for linking RS-232/422/485 devices to an Ethernet network. By using the VxComm Driver/Utility, the built-in COM port of the DS-700 series can be virtualized to a standard PC COM port in Windows. By virtue of its protocol independence, a small size and flexibility, the DS-700 series meets the demands of virtually any network-enabled application. The DS-712 is equipped with a male DB-9 connector and supports a 5-wire RS-232 port, while the DS-715 is equipped with a removable terminal block connector and supports a 4-wire RS-422 port or a 2-wire RS-485 port with 2000 Vrms isolation. The DS-700 is a non-programmable device server, while the PPDS-700-MTCP is a programmable product. The PPDS-700-MTCP series features true IEEE 802.3afcompliant (classication, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. The PPDS-700-MTCP also works as a Modbus/TCP to Modbus/RTU gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.
NS-208 Ethernet PDS-700 (IP-1) Power Supply 7000 #01 7000 #FF PC + VxComm
System Specications
Models CPU CPU SRAM Flash Memory EEPROM Communication Interface Non-isolated Ethernet PoE COM Port Formats Data Bit Parity Stop Bit Baud Rate LED Indicators L1 L2 L3 PoE Power Protection Power Reverse Polarity Protection PoE or +12 VDC ~ +48 VDC (non-regulated) 2.2 W +12 VDC ~ +48 VDC Required Supply Voltage (non-regulated) Power Consumption Mechanical Flammability
COM254 COM255
DS-712
PPDS-712-MTCP
80186, 80 MHz or compatible 512 KB Flash ROM: 512 KB 16 KB; Data retention: 40 years
Built-in Watchdog Timer Yes COM1 RS-232 (TxD, RxD, RTS, CTS, GND) 10/100 Base-TX, RJ-45 port (Autonegotiating, auto MDI/MDI-X, LED indicator) 7, 8 None, Even, Odd, Mark, Space 1, 2 115200 bps max. Run (Red) Link/Act (Red) 10/100M (Orange) Green IEEE 802.3af
...
COM2 COM1 COM3 COM4 7000 #01 7000 #FF
2.0 W
PPDS-700-MTCP (IP-n) PoE NS-205PSE COM2 COM1
...
Fire-Retardant Materials (UL94-V0 Level)
Dimensions (W x H x D) 72 mm x 118 mm x 35 mm Installation Environment DIN-Rail or Wall mounting -25 C ~ +75 C -40 C ~ +80 C 5 ~ 90% RH, non-condensing
Applications
Factory, Building and Home Automation
Operating Temperature Storage Temperature Humidity
Vol. ICNP 2.0.00
3-3-1
Palm-size Serial-to-Ethernet Device Server
Pin Assignments
Terminal No. Pin Assignment
23 RL5 COM
COM1 (RS-232)
RL5 NO
Pin Assignment
10 N/A
Terminal No.
Pin Assignment
E1
L1 L2
GND -TxD RxD --
05 04 03 02 01
09 08 07 06
-CTS RTS --
DS-712
PPDS-712-MTCP
L3
01 02 03 04 05 06 07
N/A N/A N/A N/A INIT*

IN.COM
N/A (R)+Vs (B)GND
3 3
08 09
E1
E1 (PoE) 01
09
Wiring
Dimensions (Unit: mm)

31.50
118.0
Top View
(B)GND
(R)Vs+
N/A
COM1: Male DB-9 Connector

1 1 E1 IN3 IN2 IN0 IN3 IN2 IN5 IN4 IN1 IN5 IN4 IN1 IN0 9
2-SCREW M3
72
32.91 Rear View Bottom View
39.50 DIN-Rail Mounting Bracket Side View
Front View
DS-712 CR PPDS-712-MTCP CR Device Server with 1 RS-232 port (RoHS) Programmable Device Server with PoE, Modbus/TCP and 1 RS-232 port (RoHS)
Accessories
GPSU06U-6 MDR-20-24 DIN-KA52F-48 CA-0915 NS-205 CR DN-09-2F 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 48 VDC/0.52 A, 25 W Power Supply with DIN-Rail Mounting 9-Pin Male-Female D-Sub Cable, 1.5 m Cable Unmanaged 5-port Industrial Ethernet Switch (RoHS) I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Headers. Includes CA-0910F x 2 (9-Pin Female-Female D-Sub Cable 1.0 m)
NS-205PSE CR Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
DS-715
NEW Available soon
PPDS-715-MTCP
DS-715
PPDS-715-MTCP
Serial-to-Ethernet Device Server with 1 RS-422/RS485 port
Features

Incorporate Serial Devices in an Ethernet network Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Watchdog Timer suitable for use in harsh environments 10/100 Base-TX, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator) Built-in High Performance MiniOS7 from ICP DAS PPDS-715-MTCP supports Modbus/TCP and Modbus/RTU PPDS-715-MTCP supports PoE (IEEE 802.3af, Class 1) Made from re-retardant materials (UL94-V0 Level)
"Virtual COM" extends PC COM ports High Performance Device Server Power Reverse Polarity Protection RoHS Compliant & no Halogen Serial Port +/-4 kV ESD Protection Circuit Self-Tuner ASIC Controller on the RS-485 Port Low power consumption Palm-Size with DIN-Rail Mounting
3 3
Introduction
The DS-700 is a series of Serial-to-Ethernet Device Servers that are designed for linking RS-232/422/485 devices to an Ethernet network. By using the VxComm Driver/Utility, the built-in COM port of the DS-700 series can be virtualized to a standard PC COM port in Windows. By virtue of its protocol independence, a small size and flexibility, the DS-700 series meets the demands of virtually any network-enabled application. The DS-712 is equipped with a male DB-9 connector and supports a 5-wire RS-232 port, while the DS-715 is equipped with a removable terminal block connector and supports a 4-wire RS-422 port or a 2-wire RS-485 port with 2000 Vrms isolation. The DS-700 is a non-programmable device server, while the PPDS-700-MTCP is a programmable product. The PPDS-700-MTCP series features true IEEE 802.3afcompliant (classication, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. The PPDS-700-MTCP also works as a Modbus/TCP to Modbus/RTU gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.
NS-208 Ethernet PDS-700 (IP-1) Power Supply 7000 #01 7000 #FF PC + VxComm
System Specications
Models CPU CPU SRAM Flash Memory EEPROM Communication Interface Isolated (2000 Vrms) Ethernet PoE COM Port Formats Data Bit Parity Stop Bit Baud Rate LED Indicators L1 L2 L3 PoE Power Protection
COM3 COM4 7000 #01 7000 #FF
DS-715
PPDS-715-MTCP
80186, 80 MHz or compatible 512 KB Flash ROM: 512 KB 16 KB; Data retention: 40 years
Built-in Watchdog Timer Yes RS-422 (TxD+, TxD-, RxD+, RxD-) RS-485 (D2+, D2-) 10/100 Base-TX, RJ-45 port (Autonegotiating, auto MDI/MDI-X, LED indicator) 7, 8 None, Even, Odd, Mark, Space 1, 2 115200 bps max. Run (Red) Link/Act (Red) 10/100M (Orange) Green IEEE 802.3af
COM1
...
COM2 COM1
Power Reverse Polarity Protection PoE or +12 VDC ~ +48 VDC (non-regulated) 2.2 W
+12 VDC ~ +48 VDC Required Supply Voltage (non-regulated) Power Consumption Mechanical Flammability 2.0 W
PPDS-700-MTCP (IP-n) PoE NS-205PSE COM2 COM1
...
COM254 COM255
Fire-Retardant Materials (UL94-V0 Level)
Dimensions (W x H x D) 72 mm x 124 mm x 35 mm Installation Environment DIN-Rail or Wall mounting -25 C ~ +75 C -40 C ~ +80 C 5 ~ 90% RH, non-condensing
Applications
Operating Temperature Storage Temperature Humidity
Vol. ICNP 2.0.00
3-3-3
Palm-size Serial-to-Ethernet Device Server
Pin Assignments
COM1 (RS-422/485) F.G.

23 RL5 COM RL4 COM RL3 COM RL2 COM RL1 COM RL0 COM
COM1 (RS-422/485)
COM1 (RS-422/485)
Rx23 RL5 COM RL4 COM RL3 COM RL2 COM RL1 COM RL0 COM RL5 NO RL4 NO RL3 NO RL2 NO RL1 NO RL0 NO RL5 NO RL4 NO RL3 NO RL2 NO RL1 NO 10 N/A RL0 NO N/A N/A 10 N/A
F.G. Tx+/D+ Tx-/DRx+ Rx-
E1
L1
L1
01 02 03 04 05 06 07 08 09
N/A N/A N/A N/A INIT* N/A
DS-715
PPDS-715-MTCP
3 3
(R)+Vs (B)GND
E1
Wiring
DATA+(B) Device 1 DATA+(B) DATA-(A) FGND Device 2 DATA+(B) DATA-(A) FGND Device 3 DATA-(A) FGND
(B)GND
N/A
E1
E1
GND
GND
2-wire Only Device
Top View 35.40 124.0 2-SCREW M3
72 Front View Rear View Bottom View
GND
DS-715 CR PPDS-715-MTCP CR Device Server with 1 Isolated RS-422/RS-485 port (RoHS) Programmable Device Server with PoE, Modbus/TCP and 1 Isolated RS-422/485 port (RoHS)
Accessories
GPSU06U-6 MDR-20-24 DIN-KA52F-48 NS-205 CR NS-205PSE CR 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 48 VDC/0.52 A, 25 W Power Supply with DIN-Rail Mounting Unmanaged 5-port Industrial Ethernet Switch (RoHS) Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
3-4 IP67 Programmable Serial-to-Ethernet Device Server

PPDS-741-IP67(/DIN) PPDS-742-IP67(/DIN) PPDS-743-IP67(/DIN)
Available soon Available soon Available soon
Programmable Device Server with 4 RS-232 or RS485 ports, PoE and IP67 Casing
Features

Incorporate Serial Devices in an Ethernet network Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Watchdog Timer suitable for use in harsh environments 10/100 Base-TX, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator) Built-in High Performance MiniOS7 from ICP DAS Self-Tuner ASIC Controller on the RS-485 Port Powerful Programmable Device Server
Rugged RJ-45 Connector for anti-vibration and shock Plastic Casing with IP67 Waterproof Power Reverse Polarity Protection RoHS Compliant & no Halogen Serial Port +/-4 kV ESD Protection Circuit Low power consumption Supports PoE (IEEE 802.3af, Class 1) ODM Service is available
3 4
Introduction
The PPDS-700-IP67 series is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/422/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PPDS-700-IP67 series into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high exibility, the PPDS-700-IP67 series is able to meet the demands of every networkenabled application. The PPDS-700-IP67 series includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PPDS-700-IP67 up in just one second and gives you fastest responses. The PPDS-700-IP67 is a special design for the toughest applications. It can be directly mounted to any machine or convenient at surface. The rugged packaging and IP67 connectors are rated to protect against water, oil, dust, vibration, and much more. The PPDS-700-IP67 supports PoE (Power over Ethernet) function that allows power and data to be carried over a single Ethernet cable, so a device can operate solely from the power it receives through the data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up and implementation. When there is no PoE switch on site, the PPDS-700-IP67 accepts power input from a +12 VDC ~ +48 VDC adapter. When using PoE devices such as the PPDS-700-MTCP, PPDS-700-IP67 and PET-7000 (Ethernet I/O module with PoE), you can select the ICP DAS "PoE" switch "NS-205PSE" as the power source. The NS-205PSE automatically detects whether the connected devices are PoE devices or not. This mechanism ensures that the NS-205PSE will work with both PoE and non-PoE devices simultaneously. As a power source for PoE devices, the NS-205PSE requires a power input ranging from +46 VDC ~ +55 VDC.
Applications
Factory Automation Transportation Automation Chemical Industry Automation Marine Automation
Vol. ICNP 2.0.00
3-4-1
IP67 Programmable Serial-to-Ethernet Device Server
System Specications
Models CPU CPU SRAM Flash Memory EEPROM Watchdog Timer Communication Interface COM1 COM2 COM3 COM4 Ethernet 5-wire RS-232 Isolated 2-wire RS-485 Isolated 2-wire RS-485 Isolated 2-wire RS-485 5-wire RS-232 Isolated 2-wire RS-485 5-wire RS-232 5-wire RS-232 80186, 80MHz or compatible 512 KB Flash ROM: 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles Yes PPDS-741-IP67(/DIN) PPDS-742-IP67(/DIN) PPDS-743-IP67(/DIN)
10/100 Base-TX, RJ-45 port (Auto-negotiating, Auto MDI/MDI-X, LED indicators), PoE (IEEE 802.3af, Class 1) 5, 6, 7, 8 None, Even, Odd, Mark, Space 1, 2 115200 bps max. Red: Sys Green: Link/Act (E1), Orange: 10/100M (E1) Green: RxD, Orange: TxD Power input reverse polarity protection +12 VDC ~ +48 VDC (non-regulated) or PoE (IEEE 802.3af, Class 1) 2.2 W Fire-Retardant Materials (UL94-V0 Level) Plastic casing with IP67 waterproof protection 85 mm x 76 mm x 137 mm (89 mm x 90 mm x 138 mm for /DIN versions) Wall mounting (DIN-Rail mounting for /DIN versions) -10 C ~ +60 C -10 C ~ +60 C 100% RH for operating temperature -10 C ~ +60 C
3 4
COM Port Formats Data Bit Parity Stop Bit Baud Rate LED Indicators System Ethernet COM1 ~ COM4 Power Protection Required Supply Voltage Power Consumption Mechanical Flammability Casing Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity
Note: 5-wire RS-232: TxD, RxD, CTS, RTS, GND Isolated 2-wire RS-485: DATA+, DATA-, GND; Self-Tuner Inside; 2500 Vrms Isolation

PPDS-741-IP67/PPDS-742-IP67/PPDS-743-IP67
4.0 59.5
Top View
118.5 137.0
Left Side View

IP67 Ethernet Cap with Tether
57,2
Front View
Right Side View

IP67 Ethernet Plug
Rear View
IP67 PWR Plug
Bottom View
Cable Dia: Max. 7.0 mm Min. 5.5 mm
43,3 28,6
Cable Dia: Max. 6.5 mm Min. 5.0 mm
43,2 , 40,1
22,0
27,8
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Pin Assignments
PPDS-741-IP67 PPDS-742-IP67 PPDS-743-IP67
PPDS-741-IP67 COM3: COM4:
3 4
COM1 ~ COM4
DC +12 ~ +48 VDC +Vs 1 4 5 3 Init GND 2 F.G. System Ethernet COM1 ~ COM4
LED Indicators Red Green Orange Green Orange Sys. Link/Act (E1) 10/100M (E1) RxD TxD
87654321
Pin 1 2 3 4 5 6 7 8
5-wire RS-232 -RTS GND TxD RxD -CTS --
2-wire RS-485 --GND -DATA+ DATA---
Pin 1 2 3 4 5
Name F.G. -Init +Vs GND
PPDS-741-IP67 CR PPDS-741-IP67/DIN CR PPDS-742-IP67 CR PPDS-742-IP67/DIN CR PPDS-743-IP67 CR PPDS-743-IP67/DIN CR Programmable Device Server with 1 RS-232 port, 3 RS-485 ports, PoE and IP67 Casing (RoHS) Programmable Device Server with 1 RS-232 port, 3 RS-485 ports, PoE, IP67 Casing and DIN-Rail Mounting (RoHS) Programmable Device Server with 2 RS-232 ports, 2 RS-485 ports, PoE and IP67 Casing (RoHS) Programmable Device Server with 2 RS-232 ports, 2 RS-485 ports, PoE, IP67 Casing and DIN-Rail Mounting (RoHS) Programmable Device Server with 3 RS-232 ports, 1 RS-485 port, PoE and IP67 Casing (RoHS) Programmable Device Server with 3 RS-232 ports, 1 RS-485 port, PoE, IP67 Casing and DIN-Rail Mounting (RoHS)
Accessories
GPSU06U-6 MDR-20-24 DIN-KA52F-48 NS-205 CR NS-205PSE CR 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 48 VDC/0.52 A, 25 W Power Supply with DIN-Rail Mounting Unmanaged 5-port Industrial Ethernet Switch (RoHS) Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
Vol. ICNP 2.0.00
3-4-3
Modular Programmable Serial-to-Ethernet Device Server
3-5 Modular Programmable Serial-to-Ethernet Device Server
3 5
Ethernet
Selection Guide
Model Name PDS-811 PDS-821 PDS-842 PDS-882 Slots 1 2 4 8 CPU 80186, 80 MHz 80186, 80 MHz PXA270, 520 MHz PXA270, 520 MHz RAM/ Flash Disk 512 KB/ 512 KB 512 KB/ 512 KB 64 MB/ 64 MB 64 MB/ 64 MB Ethernet 2-port Ethernet Switch 2-port Ethernet Switch Dual 10/100 M Ethernet Dual 10/100 M Ethernet Operating System MiniOS7 MiniOS7 Linux Linux Console Port 3-wire RS-232 3-wire RS-232 3-wire RS-232 3-wire RS-232 (Optional) Max. Serial Ports 4 8 16 32 Page 3-5-2 3-5-2 3-5-4 3-5-4
Optional Serial Modules

Model Name I-8112iW I-8114W I-8114iW I-8142iW I-8144iW Interface 9-wire RS-232 9-wire RS-232 5-wire RS-232 4-wire RS-422 2-wire RS-485 4-wire RS-422 2-wire RS-485 Ports 2 4 4 2 4 FIFO 128 Bytes 128 Bytes 128 Bytes 128 Bytes 128 Bytes Isolation 2500 Vrms 2500 Vrms 2500 Vrms 2500 Vrms Self-Tuner Yes Yes Connector DB-9 DB-37 DB-37 Terminal Block Terminal Block Page 3-5-6 3-5-8 3-5-8 3-5-10 3-5-10
3-5-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
PDS-811 PDS-821
Programmable Device Server with I/O Expansion Slot(s)
PDS-811
PDS-821
Features

Incorporate Serial Devices in an Ethernet network Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Watchdog Timer suitable for use in harsh environments 2-port 10/100 Base-TX Ethernet Switch (Auto-negotiating, auto MDI/MDI-X, LED indicator) ESD Protection and Frame Ground Design Built-in High Performance MiniOS7 from ICP DAS Made from re-retardant materials (UL94-V0 Level)
"Virtual COM" extends PC COM ports Programmable Internet/Ethernet Controller Power Reverse Polarity Protection 3-wire RS-232 Console Port RS-232 TxD/RxD LED Indicators System Status LED Indicator RoHS Compliant & no Halogen Low power consumption
3 5
Introduction
The PDS-811 and PDS-821 programmable device servers (PDS) are compact, modular, intelligent, rugged, and are designed for networking RS-232 and RS-422/485 serial devices to an Ethernet network. The PDS-811 has one I/O expansion slot, while PDS-821 has two I/O expansion slots that can be used to attach various 2- or 4-port serial communication modules. Therefore, a maximum of 4 serial ports can be installed on the PDS-811 or a maximum of 8 serial ports can be installed on the PDS-821. Note: There is no serial module built-in to the PDS811 or PDS-821 by default. The PDS-811 and PDS-821 controllers are equipped with a 2-port 10/100 Base-TX Ethernet Switch that can be used to connect two network segments. The Ethernet Switch processes and routes data on the data-link layer (layer 2) of the OSI model to create a different collision domain per switch port. Using a switch allows you to attain dedicated bandwidth on pointto-point connections with every computer, and therefore run in full duplex mode with no collisions. Furthermore, the built-in 2-port Ethernet Switch on the PDS-811/821 enables network wiring to be simplied by cascading your Ethernet devices. The PDS-8x1 series contains a built-in operating system, the MiniOS7, which offers a stable and high performance environment that is similar to DOS. The MiniOS7 can boot up the PDS-8x1 series within just one second, with the added benet of no virus problems and a small footprint. Furthermore, the PDS-8x1 series is designed for low power consumption, maintenance elimination (no hard disk and no fan), and is constructed from re-retardant materials (UL94-V0 level) with a robust case.
Daisy-Chain Ethernet
System Specications
Models CPU CPU SRAM Flash Memory EEPROM NVRAM RTC (Real Time Clock) 64-bit Hardware Serial Number Built-in Watchdog Timer I/O Expansion Slots Communication Interface COM1 (Console) Ethernet COM Port Formats Speed Data Bit Parity Stop Bit LED Indicators TxD/RxD System Power ESD Protection Protection Required Supply Voltage Power Consumption Mechanical Flammability
Ethernet
PDS-811
PDS-821
80186, 80 MHz or compatible 512 KB 512 KB 16 KB Yes 1 Slot 2 Slots
RS-232 (TxD, RxD, GND) 2-port 10/100 Base-TX Ethernet Switch (Auto-negotiating, auto MDI/MDI-X, LED indicator) 115200 bps max. 7, 8 None, Even, Odd 1 Yes (for COM1 console port) Yes Yes (with Frame Ground) Power Reverse Polarity Protection +10 VDC ~ +30 VDC (non-regulated) 0.6 A @ 5 V for CPU and Backplane, 1.0 A @ 5 V for Plug-in Modules, Total: 8 W Fire-Retardant Materials (UL94-V0 Level) 64 mm x 110 mm x 120 mm DIN-Rail mounting 95 mm x 110 mm x 132 mm DIN-Rail or Wall mounting
Dimensions (W x L x H) Installation
Applications
Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -40 C ~ +80 C 5 ~ 95% RH, non-condensing
Vol. ICNP 2.0.00
3-5-2

PDS-811
110.0 89.5 37.2 19.9 120.0
37.2
35.6
Left Side View
Front View
PDS-821
Right Side View
Rear View
Bottom View
Top View
3 5
11 110.0 90.6
95.0 78.6
37.2
35.6
98.5
Left Side View
Front View
Right Side View
Rear View
Bottom View
Top View
Pin Assignments
Sys TxD RxD
PDS-811 CR PDS-821 CR Programmable Device Server with 1 Expansion Slot (RoHS). Includes One CA-0910 Cable. Programmable Device Server with 2 Expansion Slots (RoHS). Includes One CA-0910 Cable.
Init Run
Link/Act
2-port Ethernet Switch
Accessories
CA-0910 MDR-20-24 NS-205 CR 9-Pin Female D-Sub & 3-wire RS-232 Cable, 1 m Cable 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting Unmanaged 5-port Industrial Ethernet Switch (RoHS)
Port1
10/100M Link/Act
Port2
10/100M
F.G. N.C. GND TxD RxD IGND +Vs
DC +10 ~ 30 V D C
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
PDS-842 PDS-882
NEW NEW
PDS-882
Programmable Device Server with I/O Expansion Slot(s)
PDS-842
Features

Linux kernel 2.6.19 Inside Standard PDS-8x2 SDK for Windows and Linux operating systems Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Watchdog Timer suitable for use in harsh environments Dual-LAN, 10/100 Base-TX Ethernet (Auto-negotiating, auto MDI/MDI-X, LED indicator) Made from re-retardant materials (UL94-V0 Level)
Incorporate Serial Devices in an Ethernet network "Virtual COM" extends PC COM ports Programmable Internet/Ethernet Controller Power Reverse Polarity Protection DB-9 RS-232 console port ESD Protection and Frame Ground Design Low power consumption
3 5
Introduction
The PDS-842 and PDS-882 programmable device servers (PDS) are compact, modular, intelligent, rugged, and are designed for networking RS-232/422/485 serial devices to an Ethernet network. The PDS-842 has 4 I/O expansion slots, while the PDS-882 has 8 I/O expansion slots that can be used to attach various 2- or 4-port serial communication modules. Therefore, a maximum of 16 serial ports can be installed on the PDS-842 or a maximum of 32 serial ports can be installed on the PDS882. By using the PDS-842 or PDS-882, users can transparently access serial devices over the Internet. This PDS, coupled with a large built-in RAM buffer, allows for fast transmission and prevents congestion of serial data on the network. A built-in powerful 32-bit RISC processor offers exceptional performance at low power consumption. The PDS-842 and PDS-882 provides two Ethernet ports, which can be used to implement redundant Ethernet communication and separate Ethernet communication (one for global Internet, one for private Ethernet). To prevent the PDS-842 and PDS-882 from failing due to power loss, the power module is designed with two inputs, so that the module can continue working even if one power input fails, and, meanwhile, there is a relay output available for informing users about the power failure.
CPU CPU
System Specications
Models PDS-842 PDS-882 PXA270 or compatible (32-bit and 520 MHz) 64 MB 64 MB 16 KB No Yes Yes 4 Slots 1 8 Slots
SRAM Flash Memory EEPROM NVRAM RTC (Real Time Clock) 64-bit Hardware Serial Number Built-in Watchdog Timer I/O Expansion Slots Programmable LED Indicator Communication Interface COM1 (Console) COM2 Ethernet COM Port Formats Speed Data Bit Parity Stop Bit Power ESD Protection Protection Redundant Power Inputs Required Supply Voltage Power Consumption Mechanical Flammability Dimensions (W x L x H) Installation
RS-232 (TXD, RXD, GND) RS-485 (D+, D-); 3000 VDC isolated RJ-45 x 2, Dual 10/100 Base-TX Ethernet Controller (Auto-negotiating, auto MDI/ MDI-X, LED indicator) 115200 bps max. 7, 8 None, Even, Odd 1 Yes (with Frame Ground) Power Reverse Polarity Protection Yes, with one relay for warning alarm +18 VDC ~ +48 VDC (non-regulated) 8.4 W (0.35 A @ 24 VDC) 9.1 W (0.38 A @ 24 VDC)
Fire-Retardant Materials (UL94-V0 Level) 188 mm x 132 mm x 111 mm 312 mm x 132 mm x 111 mm
DIN-Rail or Wall mounting -25 C ~ +75 C -30 C ~ +85 C 5 ~ 95% RH, non-condensing
Applications
Environment Operating Temperature Storage Temperature Humidity
Vol. ICNP 2.0.00
3-5-4

PDS-842 PDS-882
Front View
132.0
3 5
Bottom View
Rear View
Pin Assignments
COM1: RS-232
11.0 37.2 35.6
7 8 9
PDS-842/PDS-882
TxD RxD GND
2 3 4 5
37.2 11.0
Left Side View
Right Side View
Terminal Block
PWR1 P.GND PWR2 P.GND R.COM R.NO D+ D COM2
PDS-842 CR PDS-882 CR Programmable Device Server with 4 Expansion Slots (RoHS). Programmable Device Server with 8 Expansion Slots (RoHS).
Redundant Power 1 Redundant Power 2 Relay
Accessories
KA-52F DIN-KA52F MDR-60-24 CA-0915 NS-205 CR 24 VDC/1.04 A, 25 W Power Supply 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting 24 VDC/2.5 A, 60 W Power Supply with DIN-Rail Mounting 9-Pin Male-Female D-Sub Cable, 1.5 m Cable Unmanaged 5-port Industrial Ethernet Switch (RoHS)
RS-485 Frame Ground
F.G.
3-5-5
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
I-8112iW-G
NEW
2-port Isolated RS-232 Module
Features

High-prole Module Serial Port with +/-4 kV ESD Protection Baud Rate of up to 115200 bps Low power consumption Made from re-retardant materials (UL94-V0 Level)
2500 Vrms Isolation Internal 128-byte Hardware FIFO for each Port LED Indicators for TxD, RxD and Power Status RoHS Compliant & no Halogen
3 5
Introduction
The I-8112iW-G provides 2 isolated RS-232 serial ports. It is equipped with a 128-byte hardware FIFO for each port and offers speeds up to 115.2 kbps with support for full-duplex communication. In the harsh industrial environment, the onboard ESD protection devices can divert this potentially damaging charge away from sensitive circuitry and protect the I-8112iW from permanent damage. The serial communication modules are designed for use with intelligent devices like bar code readers, serial printers, intelligent sensors, instrumentation equipment, computers, and almost any device with an RS-232 port.
Applications
Factory Automation Building Automation Home Automation
Software
Supports interrupt driven software library Supports VxCOM library
System Specications
LED Indicators Power TxD RxD Power Power Consumption Mechanical Dimensions (W x L x H) 31 mm x 86 mm x 114 mm Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +80 C 10 ~ 95% RH, non-condensing 1.5 W 1 LED 2 LEDs 2 LEDs
I/O Specications
RS-232 Interface Number of Ports Interface 2 TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND 16C950 Compatible Speed: 115200 bps max. Controller Data Bit: 5, 6, 7, 8 Stop Bit: 1, 1.5, 2 Parity: None, Even, Odd, Mark, Space FIFO: Internal 128 bytes for each port Interrupt Bus Connector Shared Interrupt Parallel I/O Module DB-9 (Male)
Intra-module Isolated, 2500 Vrms Field to Logic ESD Protection +/-4 kV (Contact for each channel)
Vol. ICNP 2.0.00
3-5-6
Wiring
DTE Device (Computer) DB9 Pin# DB9 RS-232 Signal Names #1 Carrier Detector DCD #2 Receive Data RxD #3 Transmit Data TxD #4 Data Terminal Ready DTR #5 Signal Ground/Common (SG) GND #6 Data Set Ready DSR #7 Request to Send RTS #8 Clear to Send CTS RI #9 Ring Indicator FGND Soldered to DB9 Metal-Shield DTE to DCE Connections Signal Direction DCE Device (Modem) DB9 Pin# DB9 RS-232 Signal Names #1 Carrier Detector DCD #2 Transmit Data TxD #3 Receive Data RxD #4 Data Set Ready DSR #5 Signal Ground/Common (SG) GND #6 Data Terminal Ready DTR #7 Clear to Send CTS #8 Request to Send RTS RI #9 Ring Indicator FGND Soldered to DB9 Metal-Shield
3-wire RS-232 Wiring RS-232 Master RS-232 Device RxD TxD GND FGND
3 5
TxD RxD GND FGND
Pin Assignments
-8112iW
2-port Isolated RS-232 Tx1 Tx2 Rx1 Rx2

Pin Assignment
GND1 DTR1 TxD1 RxD1 DCD1
05 04 03 02 01 Port1
09 08 07 06
RI1 CTS1 RTS1 DSR1
71.3 68.3
Port1
5 1
9 6
36.3 86 31
Port2
Pin Assignment
Terminal
No.
Pin Assignment
TxD2 RxD2 DCD2 Port2
03 02 01
08 07 06
CTS2 RTS2 DSR2
4.1
4.3
I-8112iW-G CR 2-port Isolated RS-232 Module (RoHS)
Accessories
CA-0915 9-Pin Male-Female D-Sub Cable, 1.5 m
ICP DAS CO., LTD.
114
Vol. ICNP 2.0.00
DTR2
04
101.2
GND2
05
09
RI1
I-8114W-G I-8114iW-G
NEW
I-8114W
I-8114iW
4-port RS-232 Module NEW
4-port Isolated RS-232 Module
Features

High-prole Module Serial Port with +/-4 kV ESD Protection Baud Rate of up to 115200 bps Low power consumption Made from re-retardant materials (UL94-V0 Level)
2500 Vrms Isolation for I-8114iW Internal 128-byte Hardware FIFO for each Port LED Indicators for TxD, RxD and Power Status RoHS Compliant & no Halogen
3 5
Introduction
The I-8114W-G provides 4 non-isolated RS-232 serial ports, while the I-8114iW-G provides 4 isolated RS-232 serial ports. It is equipped with a 128-byte hardware FIFO for each port and offers speeds up to 115.2 kbps with support for full-duplex communication. In the harsh industrial environment, the onboard ESD protection devices can divert this potentially damaging charge away from sensitive circuitry and protect the I-8114W/I-8114iW from permanent damage. The serial communication modules are designed for use with intelligent devices like bar code readers, serial printers, intelligent sensors, instrumentation equipment, computers, and almost any device with an RS-232 port.
Applications
Software
System Specications
Models LED Indicators Power TxD RxD Power Power Consumption Mechanical Dimensions (W x L x H) 31 mm x 85 mm x 114 mm Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +80 C 10 ~ 95% RH, non-condensing 1.25 W 1.75 W 1 LED 4 LEDs 4 LEDs I-8142W I-8144iW
I/O Specications
Models RS-232 Interface Number of Ports Interface 4 TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND 16C950 Compatible Speed: 115200 bps max. Controller Data Bit: 5, 6, 7, 8 Stop Bit: 1, 1.5, 2 Parity: None, Even, Odd, Mark, Space FIFO: Internal 128 bytes for each port Interrupt Bus Connector Shared Interrupt Parallel I/O Module DB-37 (Female) 2500 Vrms TxD, RxD, RTS, CTS, GND I-8114W I-8114iW
Intra-module Isolated, Field to Logic ESD Protection
+/-4 kV (Contact for each channel)
Vol. ICNP 2.0.00
3-5-8
Wiring
DTE Device (Computer) DB9 Pin# DB9 RS-232 Signal Names #1 Carrier Detector DCD #2 Receive Data RxD #3 Transmit Data TxD #4 Data Terminal Ready DTR #5 Signal Ground/Common (SG) GND #6 Data Set Ready DSR #7 Request to Send RTS #8 Clear to Send CTS RI #9 Ring Indicator FGND Soldered to DB9 Metal-Shield DTE to DCE Connections Signal Direction DCE Device (Modem) DB9 Pin# DB9 RS-232 Signal Names #1 Carrier Detector DCD #2 Transmit Data TxD #3 Receive Data RxD #4 Data Set Ready DSR #5 Signal Ground/Common (SG) GND #6 Data Terminal Ready DTR #7 Clear to Send CTS #8 Request to Send RTS RI #9 Ring Indicator FGND Soldered to DB9 Metal-Shield
3-wire RS-232 Wiring RS-232 Master RS-232 Device RxD TxD GND FGND
3 5
TxD RxD GND FGND
Pin Assignments
-8114W
4-port RS-232 Tx1 Tx2 Tx3 Tx4 Rx1 Rx2 Rx3 Rx4
Pin Assignment
Terminal
No.
Pin Assignment
-8114iW
4-port Isolated RS-232 Tx1 Tx2 Tx3 Tx4 Rx1 Rx2 Rx3 Rx4
Pin Assignment
Terminal
No.
Pin Assignment
N.C. DCD3 GND CTS3 RxD3
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
RI3 DTR3 DSR3 RTS3 TxD3 DCD4 GND CTS4 RxD4 RI2 DTR2 DSR2 RTS2 TxD2 DCD1 GND CTS1 RxD1
N.C. N.C. GND3 CTS3 RxD3
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
N.C. N.C. N.C. RTS3 TxD3 N.C. GND4 CTS4 RxD4 N.C. N.C. N.C. RTS2 TxD2 N.C. GND1 CTS1 RxD1
20
RI4 DTR4 DSR4 RTS4 TxD4 DCD2 GND CTS2 RxD2 RI1
20
N.C. N.C. N.C. RTS4 TxD4 N.C. GND2 CTS2 RxD2 N.C.
19
37
DTR1 DSR1 RTS1 TxD1
19
37
N.C. N.C. RTS1 TxD1
37-Pin Female D-Sub Connector
37-Pin Female D-Sub Connector

71.3 68.3
I-8114W-G CR 4-port RS-232 Module (RoHS) 4-port RS-232 Module (RoHS) Includes One CA-9-3705 Cable I-8114iW-G CR 4-port Isolated RS-232 Module (RoHS) 4-port Isolated RS-232 Module (RoHS) I-8114iW-G/D2 CR Includes One CA-9-3705 Cable I-8114W-G/D2 CR
36.3 86 31
101.2
114
Accessories
CA-4002 CA-9-3705 37-Pin Male D-Sub Connector with Plastic Cover DB-37 Male (D-Sub) to 4-port DB-9 Male (D-Sub) Cable 0.3 m Cable for I-8114W-G/I-8114iW-G (90)
4.1 4.3
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
I-8142iW-G I-8144iW-G
NEW
I-8142iW
I-8144iW
2-port Isolated RS-422/485 Module NEW
4-port Isolated RS-422/485 Module
Features

High-prole Module Serial Port with +/-4 kV ESD Protection Baud Rate of up to 115200 bps Built-in Self-Tuner or Auto-Direction Control Low power consumption
2500 Vrms Isolation Internal 128-byte Hardware FIFO for each Port LED Indicators for TxD, RxD and Power Status RoHS Compliant & no Halogen Made from re-retardant materials (UL94-V0 Level)
3 5
Introduction
The I-8142iW-G provides 2 isolated RS-422/485 serial ports, while the I-8144iW-G provides 4 isolated RS-422/485 serial ports. It is equipped with a 128-byte hardware FIFO for each port and offers speeds up to 115.2 kbps with support for RS422 full-duplex communication. In the harsh industrial environment, the onboard ESD protection devices can divert this potentially damaging charge away from sensitive circuitry and protect the I-8142iW/I-8144iW from permanent damage. The serial communication modules are designed for use with intelligent devices like bar code readers, serial printers, intelligent sensors, instrumentation equipment, computers, and almost any device with an RS-422/485 port.
Applications
I/O Specications
Models RS-422/485 Interface Number of Ports Interface I-8142iW 2 I-8144iW 4
Software
System Specications
Models LED Indicators Power TxD RxD Power Power Consumption Mechanical Dimensions (W x L x H) 30 mm x 102 mm x 115 mm Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +80 C 10 ~ 95% RH, non-condensing 1.5 W (Without Resistor) 2 W (With 2 Resistors, 1/4 Watt, 120 5%) 1.75 W (Without Resistor) 3 W (With 4 Resistors, 1/4 Watt, 120 5%) 1 LED 2 LEDs 2 LEDs 4 LEDs 4 LEDs I-8142W I-8144iW
2-wire Cabling/ 4-wire Cabling Transfer Distance 4-wire Cabling
Isolated RS-422/485 (The RS-422 and RS-485 can not be used simultaneously) RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485: D+, D-, GND Belden 9841 (2P twisted-pair cable)/ Belden 9842 (4P twisted-pair cable), If different cables are used, the transmission distance may change Max. of 1,200 m at 9.6 kbps; Max. of 400 m at 115.2 kbps Max. of 256 devices. in a single RS-485 network without using a repeater 16C950 Compatible Speed: 115200 bps max. Data Bit: 5, 6, 7, 8 Stop Bit: 1, 1.5, 2 Parity: None, Even, Odd, Mark, Space FIFO: Internal 128 bytes for each port
Controller
Self-Tuner Asic inside Interrupt Bus Connector
Yes Shared Interrupt Parallel I/O Module Removable 20-Pin Terminal Block
Intra-module Isolated, 2500 Vrms Field to Logic ESD Protection +/-4 kV (Contact for each channel)
Vol. ICNP 2.0.00
3-5-10
Wiring
GND
GND
2-wire Only Device
Pin Assignments
3 5
-8142iW
2-port Isolated RS-422/485
Terminal No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
Pin Assignment D1+/TxD1+ D1-/TxD1RxD1+ RxD1GND1 D2+/TxD2+ D2-/TxD2RxD2+ RxD2GND2 N.C. N.C. N.C. N.C. N.C. N.C. N.C. N.C. N.C. N.C.
GND
-8144iW
4-port Isolated RS-422/485
Terminal No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
Pin Assignment D1+/TxD1+ D1-/TxD1RxD1+ RxD1GND1 D2+/TxD2+ D2-/TxD2RxD2+ RxD2GND2 D3+/TxD3+ D3-/TxD3RxD3+ RxD3GND3 D4+/TxD4+ D4-/TxD4RxD4+ RxD4GND4
Tx1 Tx2
Rx1 Rx2
12 15
Tx1 Tx2 Tx3 Tx4 Rx1 Rx2 Rx3 Rx4

12 15
20
20

102 30 71.3 68.3
36.3 101.2 115 4.1 4.3
I-8142iW-G CR I-8144iW-G CR 2-port Isolated RS-422/485 Module (RoHS) 4-port Isolated RS-422/485 Module (RoHS)
Accessories
CA-4002 CA-9-3705 37-Pin Male D-Sub Connector with Plastic Cover DB-37 Male (D-Sub) to 4-port DB-9 Male (D-Sub) Cable 0.3 m Cable for I-8114W-G/I-8114iW-G (90)
3-5-11
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
3-6 Programmable Serial-to-Fiber Device Server

PDS-220Fx
NEW Programmable Device Server with 1 RS-232, 1 RS-422/485 and 1 Fiber ports
PDS-220FT
Features

PDS-220FC PDS-220FCS PDS-220FCS-60
Adds optical ber connectivity to serial devices Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Watchdog Timer suitable for use in harsh environments Serial Port +/-4 kV ESD Protection Circuit RoHS Compliant & no Halogen 100 Base-FX (SC/ST connector) Low power consumption
"Virtual COM" extends PC COM ports Powerful Programmable Device Server Power Reverse Polarity Protection Self-tuner ASIC Controller on the RS-485 port Built-in high performance MiniOS7 from ICP DAS ODM Service is available Made from re-retardant materials (UL94-V0 level)
3 6
Introduction
The PDS-220Fx series is a family of Programmable Device Servers, also known as "Serial-to-Fiber gateway", that are designed for adding optical ber connectivity to RS-232/422/485 devices. The fiber-optic communications permits transmission over longer distances than other forms of communications because of the signals travel along them with less loss and no crosstalk. It has following important features: Immunity to electromagnetic interference (EMI) Motors, relays, welders and other industrial equipment generate a tremendous amount of electrical noise that can cause major problems with copper cabling. High electrical resistance, making it safe to use near high voltage equipment or between areas with different earth potentials. No sparks important in ammable or explosive gas environments. Not electromagnetically radiating, and difficult to tap without disrupting the signal important in highsecurity environments. Because of these reasons, optical bers have largely replaced copper wire communications in core networks in the developed world. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-220Fx series into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-220Fx series is able to meet the demands of every network-enabled application. The PDS-220Fx series includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-220Fx up in just one second and gives you fastest responses. The PDS-220Fx is equipped with 1 RS-232 port and 1 RS-422/485 port. The removable onboard terminal block connector is designed for easy and robust wiring in industrial situations.
Ethernet
PC + VxComm
NS-208 PDS-220Fx Power Supply 7000 #01 7000 #FF

...
Fiber NS-200AFx COM2 COM1 COM3 COM4
Applications
Vol. ICNP 2.0.00
3-6-1
Programmable Serial-to-Fiber Device Server
System Specications
Models CPU CPU SRAM Flash EEPROM Built-in Watchdog Timer Init Pin Communication Interface COM1 COM2 Male DB-9, 5-wire RS-232 (RxD, TxD, CTS, RTS, GND); Note: +/- 4 kV ESD Protection Removable Terminal Block 2-wire RS-485 (D+, D-, GND) with Self-Tuner ASIC or 4-wire RS-422 (TxD+, TxD-, RxD+, RxD-, GND) Note: +/- 4 kV ESD Protection 100 Base-FX, ST connector 100 Base-FX, SC connector 80186, 80 MHz or compatible 512 KB 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles Yes Yes PDS-220FT PDS-220FC PDS-220FCS PDS-220FCS-60
3 6
Fiber Port
Fiber Cables Wavelength Min. TX Output Mode Max. TX Output Max. RX Sensitivity Min. RX Overload Budget Distance COM Port Formats UART Data Bit Parity Stop Bit Baud Rate LED Indicators Link/Act System Power Power Input Power Consumption Protection Frame GND Mechanical Flammability Dimensions (W x L x H) Installation Environment Operating Temperature Storage Temperature Humidity
Multi-mode: 50/125, 62.5/125 or 100/140 m 1300 or 1310 nm -20 dBm -14 dBm -32 dBm -8 dBm 12 dBm 2 km, (62.5/125 m recommended) for full duplex 16C550 or compatible 7, 8 None, Even, Odd, Mark, Space 1, 2 115200 bps max. Green Red +12 VDC ~ +48 VDC (non-regulated) 0.14 A @ 24 VDC Power Reverse Polarity Protection Yes, for EMS Protection Fire-Retardant Materials (UL94-V0 Level) 31 mm x 121 mm x 157 mm DIN-Rail mounting -25 C ~ +75 C -30 C ~ +85 C 10 ~ 90% RH, non-condensing
Single-mode: 8.3/125, 8.7/125, 9/125 or 10/125 m -15 dBm -8 dBm -34 dBm -5 dBm 19 dBm 30 dBm 30 km, (9/125 m ecommended) 60 km, (9/125 m ecommended) for full duplex for full duplex -5 dBm -0 dBm -35 dBm
31 mm x 123 mm x 157 mm
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Pin Assignments
Pin Assignment Link/Act Sys. GND -TxD RxD -Terminal 05 04 03 02 01 No. 09 08 07 06 Pin Assignment Init -CTS RTS -Terminal No. Pin Assignment
03 02 SW1 01
PWR P.GND F.G.
Flash Lock
Rx FO1 Tx 100 Base-FX
COM1: Male DB-9 Connector
Terminal No. 01 02 03 04 05
Pin Assignment TxD+/D+ TxD-/DRxD+ RxDGND
Power Input
Power Input: Removable Terminal Block
3 6
9 6
COM2: Removable Terminal Block 1
COM1(RS-232)
COM2(RS-422/485)
PDS-220FT CR PDS-220FC CR PDS-220FCS CR PDS-220FCS-60 CR Programmable Device Server with 1 RS-232, 1 RS-422/485 and 1 Multi-mode ST Fiber Port (RoHS) Programmable Device Server with 1 RS-232, 1 RS-422/485 and 1 Multi-mode SC Fiber Port (RoHS) Programmable Device Server with 1 RS-232, 1 RS-422/485 and 1 Single-mode SC Fiber Port (RoHS) Programmable Device Server with 1 RS-232, 1 RS-422/485 and 1 Single-mode SC Fiber Port (RoHS)
Accessories
GPSU06U-6 CR MDR-20-24 CR CA-0903 CA-0910 NS-200AFT CR NS-200AFC CR NS-200AFCS CR NS-200AFCS-40T CR NS-205 CR DIN-KA52F-48 CR 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1 A, 24 W Power Supply with DIN-R 9-Pin Female D-Sub and RS-232 Connector Cable, 30 cm Cable 9-Pin Female D-Sub and 3-wire RS-232 Cable, 1 m Cable Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 Multi-mode ST connector (RoHS) Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 Multi-mode SC connector (RoHS) Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 Single-mode SC connector (RoHS) Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 (40 km) Single-mode SC connector (RoHS) Unmanaged 5-port Industrial Ethernet Switch (RoHS) 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS, for NS-205PSE)
Vol. ICNP 2.0.00
3-6-3
Tiny Serial-to-Ethernet Device Server & Modbus Gateway
3-7 Tiny Serial-to-Ethernet Device Server & Modbus Gateway

tDS-700 Series
NEW
tDS-712 tDS-700 series
Tiny Serial-to-Ethernet Device Server
Features
3 7
Incorporates any RS-232/422/485 serial device in Ethernet VxComm Driver for 32/64-bit Windows XP/2003/Vista/7 10/100 Base-TX Ethernet, RJ-45 x1 (Auto-negotiating, auto MDI/MDIX, LED Indicators) Includes redundant power inputs: PoE and DC jack Allows easy rmware updates via the Ethernet Male DB-9 or terminal block connector for easy wiring RoHS Compliant & no Halogen Cost-effective Device Servers
32-bit MCU that efciently handles network trafc Supports pair-connection (serial-bridge, serial-tunnel) applications Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols Supports UDP responder for device discovery Allows automatic RS-485 direction control Provides an intuitive web conguration interface Tiny form-factor and low power consumption Made from re-retardant materials (UL94-V0 Level)
Introduction
The tDS-700 is a series of Serial-to-Ethernet device servers designed to add Ethernet and Internet connectivity to any RS232 and RS-422/485 device, and to eliminate the cable length limitation of legacy serial communication. By using the VxComm Driver/Utility, the built-in COM port of the tDS-700 series can be virtualized to a standard PC COM port in Windows. Therefore, users can transparently access or monitor serial devices over the Internet/Ethernet without software modication.
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
The VxComm Driver/Utility supports the most popular operating system in the world, including 32-bit and 64-bit Windows 7/Vista/2008/2003/XP. The virtual COM works transparently and is protocol independent, enabling perfect integration with your current central computer. The utility provides an easy conguration interface that can be used to quickly create and map virtual COM ports to one or several tDS-700 modules. In addition, the utility contains a built-in terminal program, so users can send/receive command/data via the terminal program for easy testing. The tDS-700 device servers can be used to create a pairconnection application (as well as serial-bridge or serialtunnel), and can then route data over TCP/IP between two serial devices, which is useful when connecting mainframe computers, servers or other serial devices that do not themselves have Ethernet capability. By virtue of its protocol independence and exibility, the tDS-700 meets the demands of virtually any network-enabled application. DHCP minimizes configuration errors caused by manual IP address configuration, such as address conflicts caused by the assignment of an IP address to more than one computer or device at the same time. The tDS-700 supports the DHCP client function, which allows the tDS-700 to easily obtain the necessary TCP/IP configuration information from a DHCP server. The tDS-700 also contains a UDP responder that transmits its IP address information in response to a UDP search from the VxComm Utility, making local management more efcient. The tDS-700 features a powerful 32-bit MCU to enable efcient handling of network trafc. It also has a builtin web server that provides an intuitive web management interface to allow users to modify the settings of the module, including DHCP/Static IP, gateway/mask and serial ports. Based on an amazing tiny form-factor, the tDS-700 achieves the maximum space savings that allows it to be easily installed anywhere, even directly attached to a serial device or embedded into a machine. The tDS-700 series also contains a built-in CPU watchdog, which automatically resets the CPU if the built-in rmware is operating abnormally, or if there is no communication between the tDS700 and the host for a predefined period of time (system timeout). Low Power This is an important Consumption feature that ensures the tDS-700 operates continuously, even in harsh environments.
3 7
Comparison Table Ethernet Programmable Virtual COM Virtual I/O DHCP Web Conguration UDP Search Modbus Gateway Multi-client Remarks
tDS-700 Series 10/100 M, PoE Yes Yes Yes Yes Cost-effective
PPDS-700-MTCP Series 10/100 M, PoE Yes Yes Yes Yes Yes Yes Yes Yes
The tDS-700 offers true IEEE 802.3af-compliant (classication, Class 1) Power over Ethernet (PoE) functionality using a standard category 5 Ethernet cable to receive power from a PoE switch such as the NS-205PSE. If there is no PoE switch on site, the tDS-700 will also accept power input from a DC adapter. The tDS-700 is designed for ultra-low power consumption, reducing hidden costs from increasing fuel and electricity prices, especially when you have a huge amount of device servers installed. Reducing the amount of electricity consumed by choosing energy-efcient equipment can have a positive impact on maintaining a green environment. The tDS-712 is equipped with a male DB-9 connector, while other models are equipped with a removable terminal block connector to allow easy wiring, and also supports automatic RS-485 direction control when sending and receiving data. The tDS-700 has the same basic Serial-to-Ethernet gateway and virtual COM functions as the PPDS-700-MTCP series, as shown in the right-hand-side comparison table.
Applications
Factory Automation Home Automation Building Automation Remote Diagnosis and Management
Vol. ICNP 2.0.00
3-7-2
1. Access serial device via Virtual COM ports
Single Master
Slave(s)
RS-485 Virtual COM
Remote I/O Modules RS-485
Ethernet 10/100 M
RS-485
RS-485
3 7
2. Access serial device via TCP/IP socket connection
Single Master
Slave(s)
RS-232 TCP/IP
Ethernet 10/100 M RS-485 RS-485
3. Serial converter application through pair-connection
Pair-connection Client
Pair-connection Server
RS-232 Baud Rate: 9600
Ethernet
RS-422/485 Ba 0 Baud Rate: 115200
4. Virtual RS-485 bus application through pair-connection
RS-485
RS-485
Ethernet
RS-485
3-7-3
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
tGW-700 Series
NEW
tGW-712
tGW-700 series
Tiny Modbus/TCP to RTU/ASCII Gateway
Features

Incorporates any RS-232/422/485 serial device in Ethernet Supports Modbus TCP to RTU/ASCII Gateway Supports Modbus RTU/ASCII to TCP Gateway 10/100 Base-TX Ethernet, RJ-45 x1 (Auto-negotiating, auto MDI/MDIX, LED Indicators) Includes redundant power inputs: PoE and DC jack Allows easy rmware updates via the Ethernet Male DB-9 or terminal block connector for easy wiring RoHS Compliant & no Halogen Cost-effective Device Servers
32-bit MCU that efciently handles network trafc Supports pair-connection (serial-bridge, serial-tunnel) applications Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols Supports UDP responder for device discovery Allows automatic RS-485 direction control Provides an intuitive web conguration interface Tiny form-factor and low power consumption Made from re-retardant materials (UL94-V0 Level)
3 7
Introduction
Modbus has become a de facto standard industrial communication protocol, and is now the most commonly available means of connecting industrial electronic devices. Modbus allows for communication between many devices connected to the same RS-485 network, for example, a system that measures temperature and humidity and communicates the results to a computer. Modbus is often used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA) systems.
Vol. ICNP 2.0.00
3-7-4
The tGW-700 module is a Modbus TCP to RTU/ASCII gateway that enables a Modbus/TCP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network, and eliminates the cable length limitation of legacy serial communication devices. The module can be used to create a pair-connection application (as well as serial-bridge or serial-tunnel application), and can then route data over TCP/IP between two serial Modbus RTU/ASCII devices, which is useful when connecting mainframe computers, servers or other serial devices that use Modbus RTU/ASCII protocols and do not themselves have Ethernet capability. DHCP minimizes configuration errors caused by manual IP address configuration, such as address conflicts caused by the assignment of an IP address to more than one computer or device at the same time. The tGW-700 module supports the DHCP client function, which allows it to easily obtain the necessary TCP/IP configuration information from a DHCP server. The module also contains a UDP responder that transmits its IP address information in response to a UDP search from the eSearch utility, making local management more efcient. The tGW-700 module features a powerful 32-bit MCU to enable efficient handling of network traffic, and also has a built-in web server that provides an intuitive web management interface that allows users to modify the configuration of the module, including the DHCP/Static IP, the gateway/mask settings and the serial port settings. The module contains a dual watchdog, including a CPU watchdog (for hardware functions) and a host watchdog (for software functions). The CPU watchdog automatically resets the CPU if the built-in rmware is operating abnormally, while the host watchdog automatically resets the CPU if there is no communication between the module and the host (PC or PLC) for a predened period of time (system timeout). The dual watchdog is an important feature that ensures the module operates continuously, even in harsh environments. The tGW-700 module offers true IEEE 802.3af-compliant (classication, Class 1) Power over Ethernet (PoE) functionality using a standard category 5 Ethernet cable to receive power from a PoE switch such as the NS-205PSE. If there is no PoE switch on site, the module will also accept power input from a DC adapter. The tGW-700 module is designed for ultra-low power consumption, reducing hidden costs from increasing fuel and electricity prices, especially when you have a large number of modules installed. Reducing the amount of electricity consumed by choosing energyefcient equipment can have a positive impact on maintaining a green environment.
3 7
Low Power Consumption
The module is equipped with a male DB-9 or a removable terminal block connector to allow easy wiring. Based on an amazing tiny form-factor, the tGW-700 achieves maximum space savings that allows it to be easily installed anywhere, even directly embedded into a machine. It also supports automatic RS-485 direction control when sending and receiving data, thereby improving the stability of the RS-485 communication.
Web Conguration Yes Yes UDP Search Yes Yes Modbus Gateway Yes Yes
Comparison Table tGW-700 Series PPDS-700-MTCP Series
Ethernet 10/100 M, PoE 10/100 M, PoE
Programmable Yes
Virtual COM Virtual I/O DHCP Yes Yes Yes Yes
Multi-client Yes
Applications
Factory Automation Home Automation Building Automation Remote Diagnosis and Management
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
1. Modbus TCP to RTU/ASCII Gateway application
Single Modbus TCP Master
RS-232 Modbus ASCII
Multiple Modbus RTU/ASCII Slave Devices

Modbus TCP
Ethernet 10/100 M E RS-485
Modbus TCP slaves
Modbus RTU
2. Modbus TCP to RTU/ASCII Gateway application (dual-port)
3 7
Modbus TCP client
Modbus RTU
RS-485
10/100 M Ethernet
Port 502 (COM1) Port 503 (COM2) RS-485
Modbus ASCII
3. Modbus RTU/ASCII to TCP Gateway application (like pair-connection)
Single Modbus RTU/ASCII Master
Pair-connection Client (Modbus TCP Master)
Single Modbus TCP Slave
RS-232/422/485
Ethernet Modbus TCP
4. Virtual RS-485 bus application through pair-connection
Single Modbus RTU/ASCII Master
Modbus RTU ASCII Slaves
RS-485
RS-485
Vol. ICNP 2.0.00
3-7-6
System Specications
Models System CPU Communication Interface Ethernet 10/100 Base-TX, 8-pin RJ-45 x 1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator) PoE (IEEE 802.3af, Class 1) 2-wire RS-485 4-wire RS-422 COM2 COM3 Self-Tuner UART COM Port Format Baud Rate Data Bit Parity Stop Bit Power Power Input PoE DC Jack IEEE 802.3af, Class 1 +12 ~ 48 VDC 0.05 A @ 24 VDC Male DB-9 x 1 10-Pin Removable Terminal Block x 1 115200 bps Max. 5, 6, 7, 8 None, Odd, Even, Mark, Space 1, 2 16C550 or compatible 5-wire RS-232 3-wire RS-232 3-wire RS-232 2-wire RS-485 2-wire RS-485 2-wire RS-485 3-wire RS-232 2-wire RS-485 4-wire RS-422 32-bit MCU tDS-712 tGW-712 tDS-722 tGW-722 tDS-732 tGW-732 tDS-715 tGW-715 tDS-725 tGW-725 tDS-735 tGW-735 tDS-718 tGW-718 tDS-724 GW-724 tDS-734 tGW-734
COM1
5-wire RS-232
5-wire RS-232
3-wire RS-232
2-wire RS-485
2-wire RS-485
2-wire RS-485
2-wire RS-485
5-wire RS-232
3 7
3-wire RS-232 3-wire RS-232
Yes, automatic RS-485 direction control
Power Consumption Connector Mechanical Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity 3-wire 5-wire 2-wire 4-wire RS-232: RS-232: RS-485: RS-422:
Fire-Retardant Materials (UL94-V0 Level) 52 mm x 90 mm x 27 mm DIN-Rail mounting -25 C ~ +75 C -30 C ~ +80 C 10 ~ 90% RH, non-condensing RxD, TxD, GND (Non-isolated) RxD, TxD, CTS, RTS, GND (Non-isolated) DATA+, DATA-, GND (Non-isolated) TxD+, TxD-, RxD+, RxD-, GND (Non-isolated) 52 mm x 95 mm x 27 mm
Pin Assignments
tDS-712/tGW-712 09 08 07 COM1 06 (Male 05 DB-9) 04 03 02 01 N/A CTS1 RTS1 N/A GND N/A TxD1 RxD1 N/A
tDS-722/tGW-722 10 09 COM2 08 07 06 05 04 COM1 03 02 01 F.G. CTS2 RTS2 RxD2 TxD2 GND CTS1 RTS1 RxD1 TxD1 tDS-732/tGW-732 10 09 COM3 08 07 06 COM2 05 04 03 COM1 02 01 F.G. GND RxD3 TxD3 GND RxD2 TxD2 GND RxD1 TxD1 tDS-735/tGW-735 10 09 COM3 08 07 06 COM2 05 04 03 COM1 02 01 F.G. GND D3D3+ GND D2D2+ GND D1D1+ tDS-718/tGW-718 10 09 RS-232 07 06 05 RS-485/ 03 RS-422 02 01 04 08 F.G. N/A GND RxD1 TxD1 GND RxD1RxD1+ TxD1-/D1TxD1+/D1+
tDS-715/tGW-715 10 09 08 07 06 05 04 RS-485/ 03 RS-422 02 01 F.G. N/A N/A N/A N/A GND RxD1RxD1+ TxD1-/D1TxD1+/D1+
tDS-725/tGW-725 10 09 08 07 06 COM2 05 04 03 COM1 02 01 F.G. N/A N/A N/A GND D2D2+ GND D1D1+
tDS-724/tGW-724 10 09 08 07 COM2 06 05 04 03 COM1 02 01 F.G. N/A CTS2 RTS2 GND RxD2 TxD2 GND D1D1+
tDS-734/tGW-734 10 09 COM3 08 07 06 COM2 05 04 03 COM1 02 01 F.G. GND RxD3 TxD3 GND RxD2 TxD2 GND D1D1+
ICP DAS CO., LTD.
Vol. ICNP 2.0.00

tDS-712/tGW-712
90.0
Top View
Left Side View
Front View
Right Side View
Rear View
Bottom View
tDS-715/718/722/725/732/735/724/734 & tGW-715/718/722/725/732/735/724/734

27.0 10.2 19.0 Top View 35.4 95.0 77.4 52.0
3 7
23.0 6.6 Left Side View Front View Right Side View Rear View Bottom View
tDS-700 Series tDS-712 CR tDS-722 CR tDS-732 CR tDS-715 CR tDS-725 CR tDS-735 CR tDS-718 CR tDS-724 CR tDS-734 CR Includes: One CA-002 cable. tGW-700 Series tGW-712 CR tGW-722 CR tGW-732 CR tGW-715 CR tGW-725 CR tGW-735 CR tGW-718 CR tGW-724 CR tGW-734 CR Includes: One CA-002 cable. Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 1 RS-232 Port (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 2 RS-232 Ports (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 3 RS-232 Ports (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 1 RS-422/485 (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 2 RS-485 Ports (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 3 RS-485 Ports (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 1 RS-232/422/485 Port (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE, 1 RS-485 and 1 RS-232 Ports (RoHS) Tiny Modbus/TCP to RTU/ASCII Gateway with PoE, 1 RS-485 and 2 RS-232 Ports (RoHS) Tiny Device Server with PoE and 1 RS-232 Port (RoHS) Tiny Device Server with PoE and 2 RS-232 Ports (RoHS) Tiny Device Server with PoE and 3 RS-232 Ports (RoHS) Tiny Device Server with PoE and 1 RS-422/485 Port (RoHS) Tiny Device Server with PoE and 2 RS-485 Ports (RoHS) Tiny Device Server with PoE and 3 RS-485 Ports (RoHS) Tiny Device Server with PoE and 1 RS-232/422/485 Port (RoHS) Tiny Device Server with PoE, 1 RS-485 and 1 RS-232 Ports (RoHS) Tiny Device Server with PoE, 1 RS-485 and 2 RS-232 Ports (RoHS)
Accessories
CA-002 CA-0915 CA-0910F CA-0910N CA-PC09F FRA05-S12-SU CR DIN-KA52F CR DIN-KA52F-48 CR NS-205 CR NS-205PSE CR NS-205PSE-24V CR DC connector to 2-wire power cable, 0.3 M Male DB-9 to Female DB-9 Cable, 1.5 m Female DB-9 to Female DB-9 Cable, 1.0 m DB-9 Female-Female 3-wire Null Modem Cable, 1M DB-9 Female Connector with Plastic Cover 12V/0.58A (max.) Power Supply (RoHS, for tDS/tGW-700) 24V/1.04A, 25 W Power Supply with DIN-Rail Mounting (RoHS, for NS-205 and NS-205PSE-24V) 48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS, for NS-205PSE) Unmanaged 5-port Industrial Ethernet Switch (RoHS) Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS) Unmanaged 5-port 10/100 Mbps PoE (PSE) Ethernet Switch; 24 VDC Input (RoHS)
Vol. ICNP 2.0.00
3-7-8
Programmable Serial Device Server with LAN Switch
3-8 Programmable Serial Device Server with LAN Switch

PDS-5105D-MTCP
NEW Programmable Device Server with 10 RS-485 Ports, 2-port LAN Switch and LED Display
Features
3 8
Integrates any RS-485 serial device in an Ethernet Network Virtual COM extends the PC COM ports Virtual COM supports 32-bit and 64-bit Windows XP/2003/Vista/7 Provides 10 RS-485 ports with Self-Tuner (Auto-direction control) +/- 2 kV ESD protection on serial ports RoHS compliant & no halogen 2-port 10/100 Base-TX Ethernet Switch with LAN Bypass
Powerful programmable device server Watchdog timer suitable for use in harsh environments Power reverse polarity protection Built-in high performance MiniOS7 from ICP DAS ODM service is available Made from re-retardant materials (UL94-V0 level) Low power consumption
Introduction
The PDS-5105D-MTCP is a Programmable Device Server, also known as a "Serial-to-Ethernet gateway that is designed to allow Ethernet connectivity to be added to RS-232/485 devices. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-5105D-MTCP series into standard COM ports on a PC. By virtue of its protocol independence, specialized OS and high exibility, the PDS-5105D-MTCP series is able to meet the demands of any network-enabled application. The PDS-5105D-MTCP series includes a powerful and reliable Xserver programming structure that allows you to quickly develop custom robust Ethernet applications. The built-in, high-performance MiniOS7 boots the PDS-5105D-MTCP up in just one second and gives you the fastest response. 2-port Ethernet Switch with LAN Bypass The PDS-5105D-MTCP is equipped with a 2-port 10/100BaseTx Ethernet switch that simplifies network wiring by cascading Ethernet devices. Furthermore, the module features a LAN Bypass function allowing network trafc to be continued between two network segments (Ethernet port1 and port2). In cases where the module is ofine due to of software, hardware or power failure, the LAN Bypass function will be automatically activated, and the essential communications on the network can continue operating without interruption.
LAN Bypass Feature
Bypassing i
Ethernet
Ethernet
Ethernet
Ethernet
System Specications
System CPU SRAM Flash Memory EEPROM Watchdog Timers Communication Ports Ethernet COM1 COM2 ~ 10 2-port 10/100 Base-TX Ethernet Switch with LAN Bypass, RJ-45 x 2 (Auto-negotiating, Auto-MDI/MDIX, LED indicator) RS-232 (TxD, RxD, GND)/RS-485 (D1+, D1-), Self-Tuner ASIC inside, non-isolated RS-485 (Dx+, Dx-), Self-Tuner ASIC inside, non-isolated 80186 or compatible (16-bit and 80 MHz) 512 KB 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles 16 KB Yes (0.8 seconds)
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
COM Port Formats Baud Rate Data Bit Parity Stop Bit LED Indicators 5-Digit 7 Segment System Power Protection Frame GND Input Range Power Consumption Mechanical Flammability Dimension (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +85 C 5 ~ 95% RH, non-condensing Fire-Retardant Materials (UL94-V0 Level) 91 mm x 123 mm x 52 mm DIN-Rail mounting Power Reverse Polarity Protection Yes (for EMS Protection) +12 ~+48 VDC (non-regulated) 4.8 W Yes Red 115200 bps Max. @ 10 Ports, half-duplex, 80% loading 7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM10 None, Odd, Even, Mark, Space 1, 2: for COM1 ~ COM10
3 8
Applications
RS-485 Ethernet RS-232 RS-485 RS-485
RS-232
Daisy-Chain Ethernet Cabling

PDS-5105D-MTCP CR Programmable Device Server with 10 RS-485 Ports, 2-port LAN Switch and LED Display. (RoHS)
Accessories
GPSU06U-6 MDR-20-24 CA-0903 CA-0910 NS-205 CR DIN-KA52F-48 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 9-Pin Female D-sub and RS-232 connector cable, 30 cm Cable 9-Pin Female D-sub and 3-wire RS-232 cable, 1 M Cable Unmanaged 5-port Industrial Ethernet Switch (RoHS) 48 VDC/0.52 A, 25 W Power Supply with DIN-Rail Mounting
Vol. ICNP 2.0.00
3-8-2
Programmable Modbus to Ethernet Gateway
3-9 Programmable Modbus to Ethernet Gateway

PAC-7186EX(D)-MTCP
NEW
PAC-7186EX-MTCP PAC-7186EXD-MTCP
Modbus/RTU to Modbus/TCP Gateway
Features
3 9
Incorporate Serial Devices in an Ethernet network "Virtual COM" extends PC COM ports 10/100 Base-TX (Auto-negotiating, auto MDI/MDI-X, LED indicator) Self-Tuner ASIC Controller on the RS-485 Port 5-digit LED Display (for versions with a display) Built-in High Performance MiniOS7 from ICP DAS Made from re-retardant materials (UL94-V0 Level)
Supports Modbus/TCP and Modbus/RTU Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7 Programmable Internet/Ethernet Controller Watchdog Timer suitable for use in harsh environments Power Reverse Polarity Protection Circuit RS-485 Port ESD Protection Circuit RoHS Compliant & no Halogen Low power consumption
Introduction
The Modbus communications protocol has become the de facto industry standard, and is now the most commonly available means of connecting industrial electronic devices. Modbus allows for communication between many devices connected to the same network, for example a system that measures temperature and humidity and communicates the results to a computer. Modbus is often used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA) systems. The PAC-7186EX(D)-MTCP uses a default firmware to become a single Modbus/TCP to multiple Modbus/RTU converter. You can simply use the Modbus Utility to configure the device and then set the connection between the SCADA or HMI software and the PAC7186EX(D)-MTCP. The PAC-7186EX(D)-MTCP can also link to legacy serial devices that don't support Modbus/RTU. To use this function, you need to install the VxComm driver on the host PCs and create virtual COM ports for the remote serial ports on the PAC-7186EX(D)-MTCP. You can then directly access the remote serial devices via the virtual COM ports. Using the Modbus SDK, users can develop their own custom Modbus mware, allowing extra functions and integration of serial devices. In this way, the PAC-7186EX(D)-MTCP becomes a powerful controller. The PAC-7186EX(D)-MTCP contains a built-in operating system, the MiniOS7, which offers a stable and high performance environment that is similar to DOS. The MiniOS7 can boot up the PAC-7186EX(D)-MTCP within just one second, with the added benet of no virus problems and a small footprint. Furthermore, the PAC-7186EX(D)-MTCP is designed for low power consumption, maintenance elimination (no hard disk and no fan), and is constructed from re-retardant materials (UL94-V0 level) with a robust case. I/O Expansion Bus and Expansion Board The PAC-7186EX(D)-MTCP supports a single I/O expansion bus for plugging with a X-board. ICP DAS provides many optional X-boards for the PAC-7186EX(D)-MTCP, which offers various I/O functions, such as D/I, D/O, A/D, D/A, Timer/Counter, UART, ash memory, battery backup SRAM and AsicKey... etc.
Palm-sized Power-Saving Changeable
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
Ethernet
Ethernet
3 9
System Specications
Models CPU CPU SRAM Flash Memory EEPROM NVRAM RTC (Real Time Clock) Hardware Serial Number Built-in Watchdog Timer Communication Interface COM1 COM2 Ethernet COM Port Formats Speed Data Bit Parity Stop Bit LED Indicators 5-Digit 7 Segment System Power ESD Protection Protection Required Supply Voltage Power Consumption Mechanical Flammability Dimension (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -40 C ~ +80 C 5 ~ 95% RH, non-condensing Fire-Retardant Materials (UL94-V0 Level) 72 mm x 123 mm x 35 mm DIN-Rail or Wall mounting Yes (with Frame Ground) Power Reverse Polarity Protection +10 VDC ~ +30 VDC (non-regulated) 1.5 W 2.5 W Yes Yes 115200 bps max. 7, 8 None, Even, Odd 1 RS-232 (TxD, RxD, RTS, CTS, GND) RS-485 (D2+, D2-, GND) 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicators) 80186, 80 MHz or compatible 512 KB 512 KB 16 KB 31 Bytes (battery backup, data valid for up to 10 years) Yes Yes (64-bit) Yes PAC-7186EX-MTCP PAC-7186EXD-MTCP
Vol. ICNP 2.0.00
3-9-2
Programmable Modbus to Ethernet Gateway
Wiring
GND
GND
2-wire Only Device
Pin Assignments
PAC-7186EX(D)-MTCP I/O Expansion Bus
3 9
Terminal No.
Pin Assignment Link/Act
J1 GND CLKOUTA INTO VCC GND TO0 TI0 SCLK DIO4 VCC 01 03 05 07 09 11 13 15 17 19 02 04 06 08 10 12 14 16 18 20 GND ARDY INT1 RESET RESET\ TO1 TI1 DIO9 DIO14 VCC MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7 INT4 CS\ 01 03 05 07 09 11 13 15 17 19
GND
J2 02 04 06 08 10 12 14 16 18 20 AD0 AD1 AD2 AD3 AD4 AD5 AD6 AD7 WRITE\ READ\
E1 10/100M 01 COM1 02 03 04 05 COM2 06 07 08 09 CTS1 RTS1 RxD1 TxD1 INIT* D2+ D2(R)+Vs (B)GND
CON20A JDIP20P
CON20A JDIP20P

35 31.50
123.0
Top View 2-SCREW M3
72.0
Front View
PAC-7186EX-MTCP CR PAC-7186EXD-MTCP CR PAC-7186EX with Default Modbus/TCP Firmware (RoHS) PAC-7186EXD with Default Modbus/TCP Firmware (RoHS)
Accessories
GPSU06U-6 MDR-20-24 CA-0903 CA-0910 NS-205 CR 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 9-Pin Female D-Sub and RS-232 Connector Cable, 30 cm Cable 9-Pin Female D-Sub and 3-wire RS-232 Cable, 1 m Cable Unmanaged 5-port Industrial Ethernet Switch (RoHS)
ICP DAS CO., LTD.
Vol. ICNP 2.0.00

1.1 Industrial Communication & Networking Products P1-1-1
4-1 RS-485 Network Conguration ---------------------------------------------------4-1-1 4-2 RS-422/485 Repeaters ------------------------------------------------------------4-2-1

RS-485 Repeater -----------------------------------------------------------------------------------------------------------4-2-1 -----------------------------------------------------------------------------------------------------4-2-3 RS-422/485 Repeater
4-3 RS-485 Repeater/Hub/Splitter ---------------------------------------------------4-3-1 4-4 RS-232/422/485 Converters -----------------------------------------------------4-4-1

RS-232 to RS-485 Converter RS-485 Star Wiring Hub ---------------------------------------------------------------------------------------------4-4-1 ---------------------------------------------------------------------------------4-4-5 --------------------------------------------------------------------------------------------------4-4-3 --------------------------------------------------------------------------------------4-4-7 -----------------------------------------------------------------------------------4-4-9
RS-232 to RS-422/485 Converter Card RS-232 to RS-422/485 Converters Isolated RS-232 to RS-232 Converter
4-5 Intelligent Communication Controllers ------------------------------------------4-5-1 4-6 USB to RS-232/422/485 Converters ---------------------------------------------4-6-1
USB to RS-232 Converter USB to RS-485 Converter -------------------------------------------------------------------------------------------------4-6-1 -------------------------------------------------------------------------------------------------4-6-5
USB to RS-232/422/485 Converters -------------------------------------------------------------------------------------4-6-7 USB to RS-485 Active Star Wiring Converter --------------------------------------------------------------------------4-6-9
4-7 RS-232/422/485 to Fiber Optic Converter
--------------------------------------4-7-1
RS-485 Network Con guration
4-1 RS-485 Network Conguration

ICP DAS Self-Tuner ASIC Features
Supports Multiple Baud Rate Supports Multiple Data Format Automatic RS-485 Direction Control
I-7527D
Power Meter
RS-232 RS-232
Bar Code Reader
RS-232
RS-485
PC I-7520R PLC Printer I-7000
COM1 COM2
Baud Rate: 115200 Data Format: 10 Bits RS-485 RS-232
I-7510AR I-7188XC I-7000 I-7000 I-7000 iP-8411
4 1
Converters, Repeaters, Hubs and Splitter 4-1-1
Baud Rate: 9600 Data Format: 10 Bits
RS-485
RS-485
RS-232
I-7000
Programmable Power Supply
I-7521
RS-485
Baud Rate: 38400 Data Format: 11 Bits RS-485

SST-2450
RS-232 RS-485
Baud Rate: 19200 Da Data Format: 10 Bits
Touch Screen (TPM-1010 )

Baud Rate: 19200 Data Format: 10 Bits
I-7188 SST-2450 RU-87P4 I-7000
RS-485
RS-232 RS-485 Wireless Modem

RS-485 RS-485
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Bus Type
RS-232
tM-7510U PC tM-7520U RU-87P4
I-7000
COM1 COM3
RS-485
RS-485
I-7000
USB
I-7510 tM-7561 I-7000
I-752N
I-7000 I-752N
RS-232 RS-485
RS-485
USB
RS-485
Star Type
4
High Quality Isolated RS-485 Repeater/Hub/Splitter The maximum effective distance of RS-485 without repeater is 1200 meters (4000 feet) at baud rates up to 9.6 kbps and up to 32 (256) nodes can be connected. With the professional design, the repeater I-7510 solves the problem of signal weakening and extends the maximum effective distance by 1200 m and connects 32 (256) nodes more. And it has optical isolation design for lightning and surge protection. If the RS485 topology is too complex to make the communication well, a RS-485 hub or splitter is recommended.
I-7520U4 and I-7514U are multichannel RS-485 repeater/hub/splitter. Each channel is independent and has optical isolation, short circuit and open circuit protection. Thus when one channel fails, it will not affect another channel of the hub. These features make it perfect to star type or mixed type topology in complex and large scale RS-485 network.
1
RS-232 RS-485 USB
I-7000
RS-485 Devices
RS-485
RS-485 Devices I-7520U4 I-7514U
iP-8411
Printer
Meter
Card Reader
RS-232
RS-485
RS-485
I-7514U PC
COM1 COM3
RS-485 Devices
I-7000
M-7000
RS-485 Devices
tM Series
tM Series
I-7000
M-7000
RU-87P4
PLC
RS-485 Devices
I-7563
USB RS-485
I-7513
RS-485
I-7510
RS-485
I-7000
M-7000
I-7000
M-7000
tM Series
I-7000
I-7000
I-7000
M-7000
tM Series
RS-485 Devices
RS-485 Devices
RS-485 Devices
Vol. ICNP 2.0.00
4-1-2
RS-422/485 Repeaters
4-2 RS-422/485 Repeaters

tM-7510U
NEW Isolated RS-485 Repeater
Features

2-way 2500 VDC Isolation Protection ESD Protection for RS-485 Data Line Power Input, +10 ~ +30 VDC Low power consumption Long-cable application
Power and data ow indicator for troubleshooting Easy-to-use rotary switch for baud rate setting, 1200 ~ 115200 bps Operating Temperatures, -25 C ~ +75 C Tiny packaging ts on your DIN-Rail Mounting
4 2
Introduction
The tM-7510U repeater simply amplies, or boosts, existing RS-485 signal to enable them to cover longer distances. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of bus nodes. The module provides 2500 VDC of isolation allowing you to separate and protect critical segments of the system from the rest of the RS485 network. The tM-7510U provides 2 modes of baud rate setting, one is Self-Tuner mode and the other is Fixed baud rate mode. The Self-Tuner mode can support multiple baud rate and multiple data format. The Self-Tuner design is exactly the same as I-7510 series. The Fixed baud rate mode offers a better quality for data transmission over long or lossy lines or electrically noisy environments.
Baud rate 1200 ~ 115200 bps
Comparison Table of Repeater

Mode name RS-485 Direction Control Baud rate Dimensions (W x H x D) Remarks tM-7510U Fixed baud rate setting and Automatic RS-485 Direction Control (Self-Tuner, default) 300 ~ 115200 bps for Self-Tuner 1200 ~ 115200 bps for Fixed baud rate setting 52 mm x 95 mm x 27 mm Entry-level Long-cable application I-7510 Automatic RS-485 Direction Control (Self-Tuner) 300 ~ 115200 bps 72 mm x 122 mm x 35 mm Entry-level
System Specications
Interface Serial Interface RS-485 Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) 2-way Isolation Removable 7-Pin Terminal Block x 1; Removable 3-Pin Terminal Block x 1 Yes +10 VDC ~ +30 VDC (Non-isolated) 0.6 W -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing
Transmission Distance 2500 VDC Isolated Voltage Connector LED Indicators Power/Communication Power Input Voltage Range Power Consumption Environment Operating Temperature Storage Temperature Humidity
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
RS-485 to RS-485 Repeater (Only for half duplex application) tM-7510U RS-485 Device RS-485 Device
DATA+ DATA-
4000ft (1.2 km)
DATA0+ DATA0-
DATA1+ DATA1-
Power Input
Isolation Side
4000ft (1.2 km)
DATA+ DATA-
RS-232
PC tM-7520U tM-7510U
RS-485
I-7514U
RS-485
I-7000
15 m up to 4000 ft
I-7000
I-7000
I-7000
iP-8411
4 2
ISO.GND DATA1DATA1+
Pin Assignments
DATA0+ DATA0DATA0+ DATA0+Vs GND F.G.
tM-7510U
PWR Rx/Tx
RSW1 DSW1

27.0 52.0
19.0
35.4
77.4 95.0
Top View
tM-7510U CR Isolated RS-485 Repeater (RoHS)
Accessories
GPSU06U-6 DIN-KA52F 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting
Vol. ICNP 2.0.00
4-2-2
RS-422/485 Repeaters
I-7510
Isolated RS-485 Repeater
I-7510A I-7510
I-7510A
Isolated RS-422/485 Repeater/Converter
I-7510AR
I-7510AR
Three Way Isolated RS-422/485 Repeater/Converter
Features

Automatic RS-485 Direction Control 3-way 3000 VDC Isolation Protection for I-7510AR Transmission Speed of up to 115200 bps Operating Temperatures, -25 C ~ +75 C
2-way 3000 VDC Isolation Protection for I-7510/I-7510A ESD Protection for RS-485 Data Line Power Input, +10 ~ +30 VDC DIN-Rail Mounting
4 2
Introduction
The I-7510/I-7510A provides 2-way optical isolation between one piece of RS-422/RS-485 equipment and the rest of the system. It can also be used as a repeater to extend the transmission of an existing network. Additionally, an RS-485 system can be expanded beyond the 256 node limitation imposed by the standard. It can also be used to convert a four-wire RS422 signal into a 2-wire RS-485 signal, and vice versa. The I-7510AR is exactly the same as the I-7510A, except for the isolation side. The isolation side of the I-7510A is located in the input interface circuit, but the isolation side of the I-7510AR is located in the input and output interface circuit. In other words the I-7510AR is 3-way isolation repeater module.
System Specications
Models Interface Serial Interface RS-422 RS-485 Transmission Distance Self-Tuner Asic Inside Speed ESD Protection 3000 VDC Isolated Voltage Connector LED Indicators Power/Communication Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 122 mm x 35 mm DIN-Rail Mounting +10 VDC ~ +30 VDC (Non-isolated) 2.16 W Yes Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps Yes 2-way Isolation Removable 10-Pin Terminal Block x 2 3-way Isolation TxD+, TxD-, RxD+, RxDThe RS-422 and RS-485 cannot be used simultaneously I-7510 I-7510A I-7510AR
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
Applications for RS-422/485
RS-422 to RS-485 Converter (Only for half duplex application) TxD+ TxDRxD+ RxDRxD0+ RxD0TxD0+ TxD0-
RS-422 Device
I-7510A/ I-7510AR
DATA1+ DATA1-
4000ft (1.2 km)
DATA+ DATA-
RS-485 Device
4000ft (1.2 km)
RS-485 to RS-485 Repeater (Only for half duplex application) I-7510/ I-7510A/ I-7510AR
RS-485 Device
DATA+ DATA-
4000ft (1.2 km)
DATA0+ DATA0-
DATA1+ DATA1-
4000ft (1.2 km)
DATA+ DATA-
RS-485 Device
RS-422 to RS-422 Repeater TxD+ TxDRxD+ RxDRxD0+ RxD0TxD0+ TxD0TxD1+ TxD1RxD1+ RxD1RxD+ RxDTxD+ TxD-
RS-422 Device
I-7510A/ I-7510AR
RS-422 Device
4000ft (1.2 km)
4000ft (1.2 km)
Application for 3-way isolation
RS-485 signal
RS-485 signal
4 2
Inverter
PC
The I-7510AR should be placed near to the Inverter to eliminate the interference.
I-7510AR
Pin Assignments
I-7510
20 11 Terminal No. 01 02 03 I-7510/ I-7510A/ I-7510AR 04 05 06 07 08 09 01 10 10 Pin Assignment DATA+ DATA------(R)+Vs (B)GND Terminal No. 20 19 18 17 16 15 14 13 12 11 Pin Assignment DATA1+ DATA1--------RS-422 Terminal No. RS-485
I-7510A
Pin Assignment
I-7510AR
Pin Assignment DATA0+ DATA0-TxD0+ TxD0RxD0+ RxD0-(R)+Vs (B)GND
I-7510A/7510AR
Terminal No. RS-485 Pin Assignment
01 DATA0+ 02 DATA003 -04 RxD0+ 05 RxD006 TxD0+ 07 TxD008 -09 (R)+Vs 10 (B)GND
20 DATA1+ 19 DATA118 -17 TxD1+ 16 TxD115 RxD1+ 14 RxD113 -12 -11 --
RS-422
I-7510 CR I-7510A CR I-7510AR CR Isolated RS-485 Repeater (RoHS) Isolated RS-422/485 Repeater/Converter (RoHS) Three Way Isolated RS-422/485 Repeater/Converter (RoHS)
Accessories
Vol. ICNP 2.0.00
4-2-4
RS-485 Repeater/Hub/Splitter
4-3 RS-485 Repeater/Hub/Splitter

I-7514U
NEW Isolated 4 Channels RS-485 Repeater/Hub/Splitter
Features

RS-485 Splitter True RS-485 Star Wiring Hub Power and data ow indicator for troubleshooting Easy-to-use rotary switch for xed baud rate setting, 1200 ~ 115200 bps
Independent RS-485 driver for each channel Automatic RS-485 Direction Control 120 termination resistor for each channel Operating Temperatures, -25 C ~ +75 C DIN-Rail Mounting
Introduction
RS-485 Active Hub
The I-7514U is a 4-ch RS-485 active star wiring hub, it has 4 independent RS-485 output channels and one RS-485 input channel. Each output channel is equipped with an individual driver. The data from a master to the input channel will simultaneously be forwarded to all the four output channels.
4 3
Splitter
Data coming from the master input will be transmitted to all four RS-485 slave channels. But data coming from the slave channels will be returned to the master input only. Thus reduces the possibility of interference between each RS-485 slave loop and makes the RS-485 networks more robust and reliable.
Baud Rate Setting

The I-7514U provides 2 modes of baud rate setting, one is Self-Tuner mode and the other is xed baud rate mode. The Self-Tuner mode can support multiple baud rate and multiple data format. The Self-Tuner design is exactly the same as I-7513 and I-7510 series. The Fixed baud rate mode offers a better quality for data transmission over long or lossy lines or electrically noisy environments.
RS-485 Short-Circuit
The Short-circuit protection can automatically shut off the breakdown channel, this kind of design can sufce to protect the communication system. When a connected RS-485 equipment breaks down, the breakdown channel will be isolated to ensure that other equipments work normally.
Termination resistors
In some critical environments, you may need to add termination resistors to prevent the reection of serial signals. The I-7514U includes a jumperselectable 120 termination resistor for each channel (Default disable).
LED Indicators
The I-7514U has 6 LED to indicate the power status and network trafc. The TxD/RxD LED will ash when the unit is being sent out or received data.
System Specications
Interface Input (Master) Output (Slave) Transmission Distance Self-Tuner Asic Inside Speed ESD Protection 2500 VDC Isolation on CH1 ~ CH4 Connector LED Indicators Power/Communication Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 122 mm x 35 mm DIN-Rail Mounting +10 VDC ~ +30 VDC (Non-isolated) 1.2 W Yes 1 RS-485 Channel: Data+, Data4 RS-485 Channels: Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps via Self-Tuner mode; 1200 ~ 115200 bps via Fixed Baud Rate mode Yes 2-way Isolation Removable 10-Pin Terminal Block x 1; Removable 6-Pin Terminal Block x 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
PC
15 m up to 4000 ft
PC
RS-232
I-7520
I-7520 TxD RxD GND Isolation Side

Power Input
I-7514U D+ DD0+ (Master) D0 (Slave) D1 D1+ D2 D2+

Power Input
I-7514U D0+ (Master) D0 (Slave) D1 D1+ D2 D2+

Power Input
I-7514U
D+
D+
D+
D-
D-
D-
D+
D+
D+
D+
D+
D-
D-
D-
D-
D-
The following block diagram shows how I-7514U was designed as independent channel. Data coming from the master input will be transmitted to all four RS-485 slave channels. But data coming from the slave channels will be returned to the master input only. Thus reduces the possibility of interference between each RS-485 slave loop and makes the RS-485 networks more robust and reliable.
+10 ~ +30 VDC +Vs GND
101.2 120.0
35.4
RS-232
RS-485
Isolation Side
Isolation Side
4
I-7000 tM Series tM Series I-7514U
D3 D3+
D4 D4+
To other networks of devices or another I-7514U.
D3 D3+
D4 D4+
Device 3
Device 2
Device 1
Device 6
Device 5
Device 4
Device 8
Device 7
I-7000 I-7000 tM Series iP-8411
RS-485 Splitter
4 3
(Slave)
(Master) D0 RS-485 Driver Self-Tuner ASIC

D0 D0 D0 D0 D1 D2 D3 D4
RS-485 Driver
D1
RS-485 Driver
D2
RS-485 Driver
D3
RS-485 Driver 5V Power DC DC 2500 VDC Isolation
D4

72.0 35
I-7514U-G CR Isolated 4 Channels RS-485 Active Hub (Gray Cover) (RoHS)
56.0
56.0
Accessories
GPSU06U-6
39.5 Front View Rear View DIN-Rail Mounting Bracket
DIN-KA52F
24 VDC/0.25 A, 6 W Power Supply 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting
Vol. ICNP 2.0.00
4-3-2
RS-232/422/485 Converters
4-4 RS-232/RS-422/485 Converters

tM-7520U
NEW Isolated RS-232 to RS-485 Converter
Features

2-way 2500 VDC Isolation Protection ESD Protection for RS-485 Data Line Power Input, +10 ~ +30 VDC Low power consumption Long-cable application
Power and data ow indicator for troubleshooting Easy-to-use rotary switch for baud rate setting, 1200 ~ 115200 bps Operating Temperatures, -25 C ~ +75 C Tiny packaging ts on your DIN-Rail Mounting
4 4
Introduction
Most industrial computer systems provide standard RS-232 serial ports with limited transmission speed, range, and networking capabilities. The RS-485 standards overcome these limitations by using differential voltage lines for data and control signals. The tM-7520U transparently converts RS-232 signals into isolated RS-485 signal with no need to change any hardware or software. This lets you easily build an industrial grade, long-distance communication system using standard PC hardware. The module provides 2500 VDC of optical isolation allowing you to separate and protect critical segments of the system from the rest of the RS-485 network. The tM-7520U provides 2 modes of baud rate setting, one is Self-Tuner mode and the other is Fixed baud rate mode. The Self-Tuner mode can support multiple baud rate and multiple data format. The Self-Tuner design is exactly the same as I-7520 series. The Fixed baud rate mode offers a better quality for data transmission over long or lossy lines or electrically noisy environments.
Baud rate 1200 ~ 115200 bps
Comparison Table of Repeater

Mode name RS-485 Direction Control Baud rate Dimensions (W x H x D) Remarks tM-7520U I-7520 Fixed baud rate setting and Automatic RS-485 Direction Automatic RS-485 Direction Control (Self-Tuner) Control (Self-Tuner, default) 300 ~ 115200 bps for Self-Tuner 300 ~ 115200 bps 1200 ~ 115200 bps for Fixed baud rate setting 52 mm x 92 mm x 27 mm Entry-level Long-cable application 72 mm x 118 mm x 35 mm Entry-level
System Specications
Interface Input Output Transmission Distance 2500 VDC Isolated Protection Connector LED Indicators Power/TxD/RxD Power Input Voltage Range Power Consumption Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing +10 VDC ~ +30 VDC (Non-isolated) 0.5 W Yes RS-232: TxD, RxD and GND RS-485: Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes Removable 4-Pin Terminal Block x 1; 9-Pin Female D-Sub x 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
PC RS-232 tM-7520U
TxD RxD GND Isolation Side Power Input D+ D-
I-7514U
D0+ (Master) D0 (Slave) D1 D1+ D2 D2+ Power Input Isolation Side D3 D3+ D4 D4+
tM Series
I-7514U
RS-485
To other networks of devices or I-7514U.
PC
RS-232 tM-7520U
I-7514U I-7000 I-7000 tM Series tM Series
I-7000
15 m up to 4000 ft
I-7000
tM Series
iP-8411
4 4
Pin Assignments
D+ D+Vs GND RSW1 DSW1
Pin Assignment Terminal No. Pin Assignment
tM-7520U
PWR Rx/Tx
-TxD RxD -GND
01 02 03 04 05
06 07 08 09
-----
RS-232: Female DB-9 Connector

27.0 19.0 77.4 35.4 92.0 Top View 52.0
tM-7520U CR tM-7520U-CA CR Isolated RS-232 to RS-485 Converter (RoHS) tM-7520U CR with CA-0915 cable x 1 (RoHS)
Accessories
GPSU06U-6 DIN-KA52F tM-7510U CR CA-0915 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting Isolated RS-485 Repeater (RoHS) 9-Pin Male-Female D-Sub Cable, 1.5 m
Vol. ICNP 2.0.00
4-4-2
I-7520U4
NEW
Isolated RS-232 to 4 Channels RS-485 Active Star Wiring Hub
Features

True RS-485 Star Wiring Hub Power and data ow indicator for troubleshooting Easy-to-use rotary switch for xed baud rate setting, 1200 ~ 115200 bps Power Input, +10 ~ +30 VDC
Independent RS-485 driver for each channel Automatic RS-485 Direction Control 120 termination resistor for each channel Operating Temperatures, -25 C ~ +75 C DIN-Rail Mounting
Introduction
RS-485 Active Hub
4 4
The I-7520U4 is isolated RS-232 to 4-ch RS-485 active star wiring hub, it has 4 independent RS-485 output channels and one RS-485 input channel. Each output channel is equipped with an individual driver. The data from a master to the input channel will simultaneously be forwarded to all the four output channels.
Baud Rate Setting

The I-7520U4 provides 2 modes of baud rate setting, one is Self-Tuner mode and the other is xed baud rate mode. The Self-Tuner mode can support multiple baud rate and multiple data format. The Self-Tuner design is exactly the same as I-7520 series. The Fixed baud rate mode offers a better quality for data transmission over long or lossy lines or electrically noisy environments.
RS-485 Short-Circuit
The Short-circuit protection can automatically shut off the breakdown channel, this kind of design can sufce to protect the communication system. When a connected RS-485 equipment breaks down, the breakdown channel will be isolated to ensure that other equipments work normally.
Termination resistors
In some critical environments, you may need to add termination resistors to prevent the reection of serial signals. The I-7520U4 includes a jumperselectable 120 termination resistor for each channel (Default disable).
LED Indicators
The I-7520U4 has 6 LED to indicate the power status and network trafc. The TxD/RxD LED will ash when the unit is being sent out or received data.
System Specications
Interface Input Output Transmission Distance Self-Tuner Asic Inside Speed ESD Protection 2500 VDC Three Way Isolated Protection Connector LED Indicators Power/Communication Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 118 mm x 35 mm DIN-Rail Mounting +10 VDC ~ +30 VDC (Non-isolated) 1.2 W Yes 1 RS-232 Channel: TxD, RxD and GND 4 RS-485 Channels: Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps via Self-Tuner mode; 1200 ~ 115200 bps via Fixed Baud Rate mode Yes Yes Removable 10-Pin Terminal Block x 1; 9-Pin Female D-Sub x 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
PC I-7520U4
TxD RxD GND Isolation Side
D1+ D1 D2+ D2 D3+ D3 D4+ D4 -
I-7514U
D0+ (Master) D0 -
Power Input Isolation Side

D3 D3+ D4 D4+
(Slave)
D1 D1+ D2 D2+
RS-232
D+
D+ D-
Power Input
Device 8 D-
Device 7 DD+
To other networks of devices or I-7514U.
Device 3 D+ D-
Device 2 D+ D-
Device 1 D+ D-
Device 4 D+ D-
Device 5 D+ D-
Device 6
Pin Assignments
Terminal No. 01 03 04 RS-485 05 06 07 08 09 10 Pin Assignment D1+ D2+ D2D3+ D3D4+ D4(R)+Vs (B)GND 01
RS-232: Female DB-9 Connector -TxD RxD -GND 01 02 03 04 05
RS-232
02 D106 07 08 09 -----
4
I-7520U4
4
10

72.0 35 35 31.5
101.2
56.0
117.0
35.4
56.0
Top View
2-SCREW M3
39.5 Front View Rear View Bottom View DIN-Rail Mounting Bracket Side View
I-7520U4-G CR I-7520U4-CA-G CR Isolated RS-232 to 4 Channels RS-485 Active Hub (Gray Cover) (RoHS) I-7520U4-G CR with CA-0915 cable x 1
Accessories
GPSU06U-6 DIN-KA52F I-7510 CR CA-0915 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting Isolated RS-485 Repeater (RoHS) 9-Pin Male-Female D-Sub Cable, 1.5 m
Vol. ICNP 2.0.00
4-4-4
PCISA-7520R
Isolated RS-232 to RS-485 Converter Card
PCISA-7520AR
PCISA-7520AR
Isolated RS-232 to RS-422/485 Converter Card
Features

4 4
No External Power Supply required No Driver installation required 3000 VDC Isolation Protection Auto Switching Baud Rate, 300 ~ 115200 bps Transmission Speed of up to 115200 bps Can be used in an ISA Bus, a PCI Bus or any system with an RS-232 Interface
Introduction
The PCISA-7520 series card provides RS-232 to RS-485 (or RS-422) converter function that is exactly the same as I-7520 series. It is designed for easy installation, powered from the PCI or ISA Interface but without PCI and ISA functions. The PCISA-7520 series is equipped with one RS-232 serial port and one RS-485 serial port. The RS-232 port is designed to communicate with the local Host PC, the RS-485 is designed to communicate with the remote IO module. For adding more serial ports to a PC, please refer to VXC/VEX series card in chapter 2.
System Specications
Models Interface RS-232 Serial Interface RS-422 RS-485 Transmission Distance Self-Tuner Asic Inside Speed ESD Protection Isolated Voltage Connector Power Input Voltage Range Power Consumption Mechanical Dimensions (L x W x D) Environment Operating Temperature Storage Temperature Humidity 0 C ~ +50 C -20 C ~ +70 C 0 ~ 90% RH, non-condensing 118 mm x 72 mm x 22 mm +5 VDC from the PC 1.0 W RS-232 RS-422/485 TxD, RxD, GND Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps Yes 3000 VDC on the RS-422/485 side 9-Pin Female D-Sub x 1 9-Pin Male D-Sub x 1 TxD+, TxD-, RxD+, RxDThe RS-422 and RS-485 cannot be used simultaneously PCISA-7520R PCISA-7520AR
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
PCISA-7520R
TxD RxD GND Power Input Isolation Side
Device 1
DATA+ DATA-
Device 2
DATA+ DATA-
Device 3
DATA+ DATA-
DATA+ DATA-
Twisted Pair Wiring
PCISA-7520AR
TxD RxD GND Power Input Isolation Side TxD+ TxDRxD+ RxD-
RS-422 Device
RxD+ RxDTxD+ TxD-
Pin Assignments
4
PCISA-7520R PCISA-7520AR
PCI Bus
4
4-wire for RS-422 Tx+
Pin CN1 (For RS-232) 01 02 03 04 05
2-wire for RS-485 DATA+
Pin 01 02 03 04 05 06 07 08 09
2-wire for RS-485 DATA+ NC NC DATANC
PCISA-7520R PCISA-7520AR
NC
Rx+ TxRx-
CN2
06 CN2 (For RS-422/485) 07 08 09
DATANC
ISA Bus

118 105.1 22
PCISA-7520R CR PCISA-7520AR CR Isolated RS-232 to RS-485 Converter Card (RoHS) Isolated RS-232 to RS-422/485 Converter Card (RoHS)
71.2
121
Accessories
111 10.5 18.4
I-7510 CR I-7510A CR CA-0915 Isolated RS-485 Repeater (RoHS) Isolated RS-422/485 Repeater (RoHS) 9-Pin Male-Female D-Sub Cable, 1.5 m
Vol. ICNP 2.0.00
4-4-6
I-7520
Isolated RS-232 to RS-485 Converter
I-7520A
Isolated RS-232 to RS-422/485 Converter
I-7520R
RS-232 to Isolated RS-485 Converter
I-7520AR
RS-232 to Isolated RS-422/485 Converter
Features
4 4
Automatic RS-485 Direction Control ESD Protection for the RS-232/422/485 Data Line Power Input, +10 ~ +30 VDC DIN-Rail Mounting
3000 VDC Isolation Protection on the RS-485 side Transmission Speed of up to 115200 bps Operating Temperatures, -25 C ~ +75 C
Introduction
Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardware or software. The I-7520/I-7520A lets you easily build an industrial grade, long-distance communication system using standard PC hardware. The design of the isolation between the I-7520 and the I-7520R/AR is different. If the user wants to supply power from the PLC/PC, the I-7520R/AR should be used, otherwise the isolation will be broken. Refer to the I-7000 bus converter manual for detailed information.
System Specications
Models Interface RS-232 Serial Interface RS-422 RS-485 Transmission Distance Self-Tuner Asic Inside Speed ESD Protection 3000 VDC Isolated Voltage Connector LED Indicators Power/Communication Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 118 mm x 35 mm DIN-Rail Mounting +10 VDC ~ +30 VDC (Non-isolated) 1.2 W Yes RS-232 RS-422/485 TxD, RxD, GND TxD+, TxD-, RxD+, RxDThe RS-422 and RS-485 cannot be used simultaneously I-7520 I-7520R I-7520A I-7520AR
Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps Yes on RS-232 side 9-Pin Female D-Sub Removable 10-Pin Terminal Block on RS-485 side on RS-232 side on RS-485 side
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
I-7520 TxD RxD GND Isolation Side Power Input I-7520R TxD RxD GND Power Input Isolation Side Device 1 DATA+ DATADevice 2 DATA+ DATADevice 3 DATA+ DATAI-7520A TxD RxD GND Isolation Side Power Input Device 3 DATA+ DATATxD RxD GND Power Input I-7520AR Isolation Side TxD+ TxDRxD+ RxDRS-422 Device RxD+ RxDTxD+ TxDIsolation Site TxD+ TxDRxD+ RxDRS-422 Device RxD+ RxDTxD+ TxD-
DATA+ DATATwisted Pair Wiring Device 1 DATA+ DATADevice 2 DATA+ DATA-
DATA+ DATATwisted Pair Wiring
Pin Assignments
I-7520/I-7520R
Terminal No. RS-485 01 02 03 04 05 06 07 08 09 10 Pin Assignment DATA+ DATA------(R)+Vs (B)GND
RS-232: Female DB-9 Connector -TxD RxD -GND 01 02 03 04 05 06 07 08 09 ----Pin Assignment Terminal No. Pin Assignment
RS-232
I-7520A/I-7520AR
Terminal No. RS-485 Pin Assignment 01 DATA1+ 02 DATA103 -04 TxD+ RS-422/ 05 TxD485 06 RxD+/DATA2+ 07 RxD-/DATA208 -09 (R)+Vs 10 (B)GND
-TxD RxD -GND 01 02 03 04 05 06 07 08 09 ----Pin Assignment Terminal No. Pin Assignment
I-7520 I-7520A I-7520R I-7520AR
4 4
01
10
RS-232: Female DB-9 Connector

6.0 35 31.5
56.0 35.4 101 118 56.0
Top View
2-SCREW M3
72.0 Front View Rear View Bottom View
35
I-7520 CR I-7520A CR I-7520-G CR I-7520A-G CR I-7520R CR I-7520AR CR I-7520R-G CR I-7520AR-G CR Isolated RS-232 to RS-485 Converter (RoHS) Isolated RS-232 to RS-422/485 Converter (RoHS) Isolated RS-232 to RS-485 Converter (Gray Cover) (RoHS) Isolated RS-232 to RS-422/485 Converter (Gray Cover) (RoHS) RS-232 to Isolated RS-485 Converter (RoHS) RS-232 to Isolated RS-422/485 Converter (RoHS) RS-232 to Isolated RS-485 Converter (Gray Cover) (RoHS) RS-232 to Isolated RS-422/485 Converter (Gray Cover) (RoHS)
Accessories
GPSU06U-6 DIN-KA52F I-7510 CR I-7510A CR CA-0915 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting Isolated RS-485 Repeater (RoHS) Isolated RS-422/485 Repeater (RoHS) 9-Pin Male-Female D-Sub Cable, 1.5 m
Vol. ICNP 2.0.00
4-4-8
I-7551
Isolated RS-232 to RS-232 Converter
I-7551
I-7551-G
Features

3000 VDC 3-way Isolation Protection Transmission Speed of up 115200 bps Operating Temperatures, -25 C ~ +75
ESD Protection Power Input, +10 ~ +30 VDC DIN-Rail Mounting
4 4
Introduction
The I-7551 provides a complete full-duplex (including control signal) electrical isolation channel between two RS-232 devices. This isolation is an important consideration if a system uses different power sources, has noisy signals, or must operate at different ground potentials. The CTS/RTS pins of the I-7551 module can be recongured as DSR/DTR to meet requirements on different applications. The I-7551 incorporates two DC-to-DC converters, the isolation side of the I-7551 is located in the input and output interface circuit. In other words, the I-7551 is 3-way isolated RS-232 to RS-232 converter.
System Specications
Interface Input Output Transmission Distance Speed ESD Protection 3000 VDC Three Way Isolated Protection Connector LED Indicators Power/Communication Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 118 mm x 35 mm DIN-Rail Mounting +10 VDC ~ +30 VDC (Non-isolated) 1.2 W Yes RS-232 Input RS-232 Output TxD, RxD, CTS, RTS, GND (Default) or TxD, RxD, DSR, DTR, GND Jumpers JP1 and JP2 are used to select the RS-232 input source type TxD, RxD, CTS, RTS, GND (Default) or TxD, RxD, DSR, DTR, GND Max. 15 M at 115200 bps 300 ~ 115200 bps Yes Yes 9-Pin Female D-Sub 9-Pin Male D-Sub
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
Host PC
Max. Distance 15 m
Pin Assignments
RS-232
RS-232 Output (R)+Vs (B)GND I-7551 RS-232 Input
I-7551
TxD, RxD, CTS, RTS, GND (Default)

RS-232 Input Pin Assignment Terminal No. Pin Assignment Pin Assignment RS-232 Output Terminal No. Pin Assignment
iP-8411
GND 01 02 03 04 05
Max. Distance 15 m
RS-232
TxD RxD ---
06 07 08 09
-CTS RTS --
GND -TxD RxD --
05 04 03 02 01
09 08 07 06
-CTS RTS --
Internal I/O Structure

Female DB-9 Connector Male DB-9 Connector
TxD RxD CTS/DCD RTS/DTR GND
2500 VDC Photo-isolation
TxD RxD RS-232 Driver CTS/DCD RTS/DTR GND

Pin Assignment
TxD, RxD, DTR, DSR, GND

RS-232 Input Terminal No. Pin Assignment Pin Assignment RS-232 Output Terminal No. Pin Assignment
RS-232 Driver
4 4
GND -TxD RxD -05 04 03 02 01
3000 VDC Isolation

GND 01 02 03 04 05
DC
DC
TxD RxD ---
06 07 08 09
DTR --DSR
09 08 07 06
DTR --DSR
+10 ~ +30 VDC +Vs GND 5V Power DC DC 3000 VDC Isolation
Female DB-9 Connector
Male DB-9 Connector

72.0 35 35 31.50
35.4
56.0 101 118
Top View 56.0
2-SCREW M3
39.50 Front View Rear View Bottom View DIN-Rail Mounting Bracket Side View
I-7551 CR I-7551-G CR Isolated RS-232 to RS-232 Converter (RoHS) Isolated RS-232 to RS-232 Converter (Gray Cover) (RoHS)
Accessories
Vol. ICNP 2.0.00
4-4-10
Intelligent Communication Controllers
4-5 Intelligent Communication Controllers

I-752N Series
Programmable Intelligent Communication Controller
Features

Built-in "Addressable RS-485 to RS-232 Converter" rmware Supports about 30 well-dened commands Supports power-up and safe value for DO R.O.C. Invention Patent No. 086674, No.103060 and No. 132457
Programmable Intelligent Communication Controller Supports Dual-Watchdog commands Watchdog timer provides fault tolerance and recovery Low power consumption Made from re-retardant materials (UL94-V0 Level)
Introduction
4 5
There are many RS-232 devices in industry applications. Nowadays it becomes important to link all those RS-232 devices together for automation and information. Usually those RS-232 devices are far away from the host-PC and widely distributed in the factory. So it is not a good idea to use multi-serial cards to connect all these RS-232 devices together. The I-752N series product can be used to link multiple RS-232 devices by a single RS-485 network. The RS-485 is famous for its easy maintenance, simple cabling, stable, reliable and low cost.
Onboard 1 KB Queue buffer The I-752N series module is equipped with a 1 KB queue buffer for its local RS-232 device. All input data can be stored in the queue buffer until the Host PC has time to read it. This feature allows the Host PC to link thousands of RS-232 devices without any loss of data. 3000V isolation on RS-485 side COM2 of the I-752N modules is an isolated RS-485 port with 3000 VDC isolation, which protects the local RS-232 devices from transient noises coming from the RS-485 network. Self-Tuner ASIC inside The built-in Self-Tuner ASIC on an RS-485 port can auto detect and control the send/receive direction of the RS-485 network. Thus, there is no need for application programs to be concerned about direction control of the RS-485 network. Can be used as Addressable RS-485 to RS-232 Converter Most RS-232 devices don't support device addressing. The ICP DAS I-752N module assigns a unique address for each RS-232 device installed. When Host PC sends a command with a device address to the RS-485 network, the destination I-752N module will remove the address field, and then pass the other commands to the specified local RS-232 devices. The response from the local RS-232 devices will be returned to the Host PC via the I-752N. Master-type Addressable RS-485 to RS-232 Converter The ICP DAS I-752N product is unique that they are Master type converters which use our R.O.C. Patent 086674, while most other converters are Slave-type, which are helpless without a Host PC. In real industrial applications, many users are not satised with Slavetype converters as they cannot be adapted to individual requirement. The powerful I-752N series analyzes the local RS-232 devices, DI and DO without the need for a Host PC. Refer to Applications 5 ~ 9 for more information in the manual. Can be used as RS-232 to RS-485 Device Server The Device Server is an appliance that networking any device with a serial communication port. The I-752N series Intelligent Communication Controller allows the RS-232 serial devices to connect to the RS-485 network. Also, there are PDS series products available from ICP DAS, which provide Ethernet connectivity for serial devices.
Applications
PC
USB
RS-485
I-7563
I-7000
I-7000
I-752N
RS-232
RFID Reader
PLC
Power Meter
Bar Code Reader
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
I/O Specications
Models User-Dened I/O I/O Channel Digital Output DI Channel Input Type Off Voltage On Voltage Digital Output DO Channel Output Type Load Voltage Load Current 3 +30 VDC max. 100 mA max. 1 5 1 1 Open Collector (Sink/NPN), non-isolated 2 +1 V max. +3.5 VDC ~ +30 VDC 2 1 5 1 1 Source (Dry Type), Common Ground, non-isolated 3 I-7521(D) I-7522(D) I-7523(D) I-7522A(D) I-7524(D) I-7527(D)
System Specications
Models System CPU SRAM Flash EEPROM Real-Time Clock Watchdog Timer Operating System Communication Interface COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 Baud Rate Data Bit Parity Stop Bit Connector LED Indicators LED Display Power Protection Power Requirement Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature -25 C ~ +75 C -40 C ~ +80 C Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 118 mm x 35 mm DIN-Rail Mounting 72 mm x 120 mm x 35 mm Power input reverse polarity protection Unregulated +10 VDC ~ 30 VDC 2 W (without display), 3 W (with display) 5-digit 7-segment LED display for D versions 5-wire RS-232 or 2-wire RS-485 Isolated 2-wire RS-485 300 ~ 115200 bps COM1 ~ COM2: 7 or 8 COM3 ~ COM8: 5, 6, 7 or 8 COM1 ~ COM2: None, Even, Odd COM3 ~ COM8: None, Even, Odd, Mark , Space COM1 ~ COM2: 1 or 2 (data bit must be 7) COM3 ~ COM8: 1 or 2 Male DB-9 x 1 13-Pin screw terminal block x 1 (for 16 ~ 26 AWG wires; 3.81 mm pitch) 14-Pin screw terminal block x 2 (for 16 ~ 22 AWG wires; 3.5 mm pitch) 5-wire RS-232 5-wire RS-232 3-wire RS-232 2-wire RS-485 4-wire RS-422 5-wire RS-232 5-wire RS-232 5-wire RS-232 3-wire RS-232 3-wire RS-232 3-wire RS-232 3-wire RS-232 3-wire RS-232 3-wire RS-232 80188, 20 MHz 128 KB 512 KB 2 KB Yes MiniOS7 I-7521(D) I-7522(D) I-7523(D) I-7522A(D) I-7524(D) I-7527(D)
4 5
Humidity 0 ~ 90% RH, non-condensing Note: 3-wire RS-232: RxD, TxD, GND 5-wire RS-232: RxD, TxD, CTS, RTS, GND 2-wire RS-485: DATA+, DATA-, GND; Self-Tuner inside Isolated 2-wire RS-485: DATA+, DATA-; Self-Tuner inside; 3000 VDC Isolation 4-wire RS-422: RxD+, RxD-, TxD+, TxD-, GND
Vol. ICNP 2.0.00
4-5-2
Pin Assignments
01
I-7521 I-7522 I-7523
01
28
I-7522A I-7524 I-7527
COM1 RS-232/RS-485
14
13
15
Pin Assignment 01 02 03 04 DO DI D1+ D1CTS1 RTS1 GND TxD1 RxD1 INIT* (Y)D2+ (G)D2(R)+Vs (B)GND COM3 DI DO X507 Terminal No. 28 27 26 25 24 23 22 21 20 19 18 17 16 15 Pin Assignment DO3 DO2 DO1 DO0 DO.PWR GND DI3 DI2 DI1 DI0 RxD3RxD3+ TxD3TxD3+
Terminal No.
01 X3 02 X2 03 X1 04 DO3 DO 05 DO2 06 DO1 07 DI3 DI 08 DI2 09 INIT* 10 (Y)D2+ 11 (G)D212 (R)+Vs 13 (B)GND
DO DI
GND N.C. RxD TxD Data+
05 04 03 02 01
09 Data08 RTS 07 CTS 06 N.C.
05 COM1 06 07 08 09 10 COM2 11 12 13 14
4 5
COM2 Power Input
Power Input
Terminal No.
Pin Assignment
Terminal No.
Pin Assignment 01 02 03 04 DO DI D1+ D1CTS1 RTS1 GND TxD1 RxD1 INIT* (Y)D2+ (G)D2(R)+Vs (B)GND
X505 Terminal No. 28 COM5 27 26 25 24 23 COM4 22 21 20 19 18 COM3 17 16 15 Pin Assignment RxD5 TxD5 RTS5 CTS5 GND RxD4 TxD4 RTS4 CTS4 GND RxD3 TxD3 RTS3 CTS3
01 CTS3 02 RTS3 COM3 03 RxD3 04 TxD3 05 GND DO DI 06 DO1 07 DI3 08 DI2 09 INIT* COM2 Power Input 10 (Y)D2+ 11 (G)D212 (R)+Vs 13 (B)GND
DO DI
05 04 03 02 01
05 COM1 06 07 08 09 10 COM2 11 12 13 14
Power Input
Terminal No.
Pin Assignment
Terminal No.
Pin Assignment 01 02 03 04 DO DI D1+ D1CTS1 RTS1 GND TxD1 RxD1 INIT* (Y)D2+ (G)D2(R)+Vs (B)GND
X506 Terminal No. 28 COM7/8 27 26 25 24 23 COM5/6 22 21 20 19 18 COM3/4 17 16 15 Pin Assignment TxD8 RxD8 TxD7 RxD7 GND TxD6 RxD6 TxD5 RxD5 GND TxD4 RxD4 TxD3 RxD3
01 CTS3 02 RTS3 COM3 03 RxD3 04 TxD3 05 GND COM4 DI 06 TxD4 07 RxD4 08 DI2 09 INIT* COM2 Power Input 10 (Y)D2+ 11 (G)D212 (R)+Vs 13 (B)GND
DO DI
05 04 03 02 01
05 COM1 06 07 08 09 10 COM2 11 12 13 14
Power Input
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Wiring
3-wire RS-232 Wiring RS-232 Master TxD RxD GND RS-232 Device RxD TxD GND
Input Type
DI Value as 0
Relay ON
DI Value as 1 Relay Off

DIx GND
Relay Open
Relay Contact
118
DIx GND
Relay Close
Voltage < 1V 2-wire RS-485 Wiring Device 1 DATA+(B) DATA-(A) Device 2 DATA+(B) DATA-(A) Device 3 DATA+(B) DATA-(A)
TTL/CMOS Logic
Logic Level Low Logic GND
Voltage > 3.5V

DIx GND
Logic Level High Logic GND
DIx GND
Open Collector On Open Collector
Open Collector Off

Off
GND
GND
GND
RS-485 Master DATA+(B) DATA-(A) GND 2-wire Only Device
On
DIx GND
DIx GND
Output Type
DO Command as 1 Relay ON
DO Command as 0 Relay Off
Drive Relay 4-wire RS-422 Wiring RS-422 Master TxD+(B) TxD-(A) RxD+(B) RxD-(A) GND RS-422 Device RxD+(B) RxD-(A) TxD+(B) TxD-(A) GND
+ -
DO.PWR DOx DO.GND
+ -
DO.PWR DOx DO.GND
Resistance Load
+ -
+ -
DO.PWR DOx DO.GND
+ -
+ -
DO.PWR DOx DO.GND
4 5

I-7521(D)/I-7522(D)/I-7523(D)
6.00
35
31.50
56
101
35.4
56.0
118.0 35
Top View
2-SCREW M3
11
50 59.74 72 Front View
I-7521(D)/I-7522(D)/I-7523(D)
9.04
50
35
31.50
56
101
35.4
56.00
120 35
Top View 2-SCREW M3
58.15 72 Front View
I-7521 CR I-7521D CR I-7522 CR I-7522D CR I-7522A CR I-7522AD CR Programmable Intelligent Communication Controller (RoHS) I-7521 with Display Programmable Intelligent Communication Controller (RoHS) I-7522 with Display Programmable Intelligent Communication Controller (RoHS) I-7522A with Display I-7523 CR I-7523D CR I-7524 CR I-7524D CR I-7527 CR I-7527D CR Programmable Intelligent Communication Controller (RoHS) I-7523 with Display Programmable Intelligent Communication Controller (RoHS) I-7524 with Display Programmable Intelligent Communication Controller (RoHS) I-7527 with Display
Accessories
MDR-20-24 DIN-KA52F 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting GPSU06U-6 KA-52F 24 VDC/0.25 A, 6 W Power Supply 24 VDC/1.04 A, 25 W Power Supply
Vol. ICNP 2.0.00
4-5-4
tM-752N Series
NEW
tM-7521
tM-7522
Tiny Addressable Serial Converter
Features

Integrates any RS-232 serial device 10/100 Base-TX Ethernet, RJ-45 x 1 (Auto-negotiating, auto MDI/MDIX, LED Indicators) Includes a UDP responder for device discovery Provides an intuitive web conguration interface Tiny form-factor and low power consumption Made from re-retardant materials (UL94-V0 Level)
Contains a high-performance 32-bit MCU Includes redundant power inputs: PoE and DC jack Provides automatic RS-485 direction control Supports easy rmware updates via the Ethernet Terminal block connector for easy wiring RoHS compliant & no Halogen Low channel count & cost-effective
Introduction
4 5
There are many RS-232 devices that are used in industrial applications. Nowadays, it has become important to link all these RS-232 devices together for automation purposes and for extracting information. Usually, those RS-232 devices are at a distance from the host PC and may be widely distributed throughout the factory. The tM-752N can be used to link multiple distributed RS-232 devices using a single RS-485 network. The RS-485 is renowned for its easy maintenance, simple cabling, stability, reliability and low cost. tM-752N is non-programmable and cost-effective module, while the I-752N is programmable.
Easy Conguration (DCON & Web) The tM-752N series supports the DCON protocol (compatible with I-752N series), allowing users to modify the settings of the module, such as the serial port conguration and the operation mode, etc. The module also has a built-in web server which provides an intuitive web management interface that simplies the conguration of the module. Onboard 1 KB Queue buffer The tM-752N series module is equipped with a 1 KB queue buffer for its local RS-232 device. All data can be stored in the queue buffer until the host PC has time to read it. This feature allows the host PC to link many low-speed RS-232 devices without suffering any data loss, and also makes it easier for baud rate converter applications to be implemented. Self-Tuner ASIC inside The built-in Self-Tuner ASIC on an RS-485 port can automatically detect and control the send/receive direction of the RS485 network. Consequently, there is no need for application programs to be concerned with direction control of the RS-485 network. Addressable RS-232 to RS-485 Converter Most RS-232 devices dont support device addressing. The ICP DAS tM-752N series module assigns a unique address for each RS-232 device installed. When a command with a device address is sent to the RS-485 network, the destination tM752N module removes the address eld, and then passes the commands to the specied local RS-232 device. The response from the local RS-232 device will be returned to the host PC via the tM-752N.
Applications
tM-752N
RS-232
Power Meter RFID Reader Bar Code Reader
PC
USB
I-7563
RS-485
tM-752N PLC
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
System Specications
Models System CPU Communication Interface Ethernet COM1 COM2 COM3 Self-Tuner UART COM Port Format Baud Rate Data Bit Parity Stop Bit Connector Power PoE DC Jack Power Consumption Power Input Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +80 C 0 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 52 mm x 95 mm x 27 mm DIN-Rail Mounting IEEE 802.3af, Class 1 +12 ~ 48 VDC 0.05 A @ 24 VDC 115200 bps Max. 5, 6, 7, 8 None, Odd, Even, Mark, Space 1, 2 10-Pin Removable Terminal Block x 1 10/100 Base-TX, 8-pin RJ-45 x 1 (Auto-negotiating, Auto-MDI/MDIX, LED indicator), PoE (IEEE 802.3af, Class 1) 2-wire RS-485 5-wire RS-232 Yes, automatic RS-485 direction control 16C550 or compatible 3-wire RS-232 3-wire RS-232 32-bit MCU tM-7521 tM-7522
4 5
Note: 5-Wire RS-232: RxD, TxD, CTS, RTS, GND (Non-isolated) 3-Wire RS-232: RxD, TxD, GND (Non-isolated) 2-Wire RS-485: DATA+, DATA-, GND (Non-isolated)

27.0 10.2 19.0 Top View 35.4 95.0 77.4
tM-7521 CR tM-7522 CR Tiny addressable serial converter, PoE and 1 RS-232 Port and 1 RS-485 Port (RoHS) Tiny addressable serial converter, PoE and 2 RS-232 Ports and 1 RS-485 Port (RoHS) Includes: One CA-002 cable.
Accessories
CA-002 CA-0915 CA-0910F CA-0910N CA-PC09F NS-205 CR NS-205PSE CR DC connector to 2-wire power cable, 0.3 M 9-Pin Male-Female D-Sub Cable, 1.5 m Female DB-9 to Female DB-9 Cable, 1.0 m DB-9 Female-Female 3-wire Null Modem Cable, 1M DB-9 Female connector with plastic cover Unmanaged 5-port Industrial Ethernet Switch (RoHS) Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
Vol. ICNP 2.0.00
4-5-6
USB to RS-232/422/485 Converters
4.6. USB to RS-232/422/485 Converters

USB-2512 USB-2514 USB-4518
Available soon
USB-2512 USB-2514 USB-4518
USB to 2-Port RS-232 Converter Available soon
USB to 4-Port RS-232 Converter Available soon
USB to 8-Port RS-232 Converter
Features
4 6
Hi-Speed USB 2.0 for up to 480 Mbps USB transmission Power and data ow indicator for troubleshooting Transmission speed up to 921.6 kbps Driver Supports Windows 98/ME/2000/XP/Vista (32/64bit)/7 (32/64-bit)/Linux
Bus-powered; no need for external power supply for USB2412/2514 Operating Temperatures, -25 C ~ +75 C Lockable USB cable DIN-Rail Mounting
Introduction
USB-2512/2514 allows PC users to connect a serial device to a system that use a USB interface. To attach the USB2512/2514 to a PC, you dont need to open the chassis or power down your PC. Instantly get extra high-speed RS-232 ports. The power is derived from the USB port, so there are no power adapters to deal with. Supporting high-speed 921.6 kbps transmission.
System Specications
Models Interface USB RS-232 Speed Connector LED Indicators Power/Communication Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 34 mm x 110 mm x 92 mm 31 mm x 157 mm x 116 mm 60 mm x 172 mm x 143 mm Bus-powered 0.2 W 4W Bus-powered/External power supply 8W Yes RS-232 USB Compatibility: USB 1.1 and 2.0 standards TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND 300 bps ~ 921.6 Kbps DB9 male x 2 Type B DB9 male x 4 DB9 male x 8 USB-2512 USB-2514 USB-4518
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Lockable USB Cable

The USB-2512/2514/4518 is designed for industrial applications in harsh environments. Lockable USB cable design ensure tight, robust connections, and guarantee reliable operation, even for applications that are subject to high vibration and shock.
Applications
RS-232
RFID R Reader
4 6
PC
USB-2514
PLC
USB 2.0
Meter
Machine
USB-2512 CR USB-2514 CR USB-4518 CR Include Cable USB to 2-Port RS-232 Converter (RoHS) USB to 4-Port RS-232 Converter (RoHS) USB to 8-Port RS-232 Converter (RoHS) CA-USB15 (1.5 m Cable) x 1
Accessories
USB-2560 CR Industrial 4-port USB 2.0 Hub
Vol. ICNP 2.0.00
4-6-2
I-7560
USB to RS-232 Converter
Features

Fully Compliant with the USB 1.1/2.0 (High Speed) Driver Supports Windows 98/ME/2000/XP/Vista 7 (32/64-bit)/Linux
No External Power Supply required Operating Temperatures, -25 C ~ +75 C
4 6
Introduction
The I-7560 provides a Windows serial COM port via it's USB connection and is compatible with new and legacy RS-232 devices. USB Plug-and-Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port settings manually. The I-7560 features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND) on it's PC compatible DB-9 male connector. It also features a high-speed 115200 bps transmission rate. The I-7560 is powered from the USB bus and no additional power supply is needed.
Software
Driver Windows 98/ME/2000/XP/Vista (32/64-bit)/7 (32/64-bit)/Linux
System Specications
Interface USB RS-232 Speed Connector Cable Included LED Indicators Power Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 33 mm x 60 mm x 15 mm +5 VDC from USB 0.3 W Yes RS-232 USB Compatibility: USB 1.1 and 2.0 standards TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND; non-isolated 300 ~ 115200 bps 9-Pin Male D-Sub Type B CA-USB18 (1.8 m Cable) x 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
RS-232
Laptop I-7560 Modem iP-8441 PLC
USB
I-7560 with CA-USB18
I-7560 with iP-8441
I-7560 with Modem
4
Pin Assignments
CN2 1 6 9
VBUS

5
DCD (Pin 1) DSR (Pin 6) RxD (Pin 2) USB to Series Chip RTS (Pin 7) RS-232 Driver TxD (Pin 3) CTS (Pin 8) DTR (Pin 4) RI (Pin 9) GND (Pin 5)
6
Pin 01 02 03 04 05 06 07 08 09 DCD RxD TxD DTR GND DSR RTS CTS RI
Signal Data Carrier Detect Receive Data Transmit Data Data Term Ready Ground Data Set Ready Request To Send Clear To Send Ring Indicator
Mode Input Input Output Output -Input Output Input Input
DATA0+ DATA0GND

15 33 15
I-7560 CR USB to RS-232 Converter (RoHS)
Top View 60 54 60
Accessories
18.6
USB-2560 CR Industrial 4-port USB 2.0 Hub USB Type A to Type B Cable
Front View
Right Side View
Bottom View
CA-USB18
Vol. ICNP 2.0.00
4-6-4
tM-7561
USB to Isolated RS-485 Converter
Features

Fully Compliant with the USB 1.1/2.0 (High Speed) Power and data ow indicator for troubleshooting 2500 VDC Isolation Protection on the RS-485 side Driver Supports Windows 98/ME/2000/XP/Vista (32/64bit)/7 (32/64-bit)/Linux Tiny packaging ts on your DIN-Rail Mounting
No External Power Supply required Automatic RS-485 Direction Control Operating Temperatures, -25 C ~ +75 C Low power consumption Cost-effective Converter
Introduction
4 6
The tM-7561 is a cost-effective USB to RS-485 converter. Connecting the tM-7561 to a PC, you get one RS-485 port that allows you to access RS-485 devices through the USB interface. Like the I-7520, the tM-7561 contains "Self-Tuner" chip auto-tunes the baud rate and data format to the RS-485 network. The tM-7561 module derives its power from the USB port and doesn't need external power adapter.
Comparison Table of Converter

Mode name Serial Interface Dimensions (W x H x D) Remarks tM-7561 Only RS-485 52 mm x 87 mm x 27 mm Cost-effective, Entry-level I-7561 RS-232/422/485 72 mm x 115 mm x 35 mm Entry-level
Software
System Specications
Interface USB RS-485 RS-485 Transmission Distance Self-Tuner Asic Inside Speed Connector Cable Included LED Indicators Power Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 52 mm x 87 mm x 27 mm DIN-Rail Mounting +5 VDC from USB 0.4 W Yes RS-485 USB Compatibility: USB 1.1 and 2.0 standards Data+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps Removable 7-Pin Terminal Block Type B CA-USB18 (1.8 m Cable) x 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
PC

COM3 USB
tM-7561
VBUS DATA0+ DATA0iP-8411 I-7510 I-7000
GND
USB to Series Chip
RS-485 Driver
DATA1+ DATA1-
RS-232
Self-Tuner ASIC
SST-2450
I-7520
RS-485
ISO.GND
DC
SST-2450
DC
2500 VDC Isolation
Pin Assignments
4 6
tM-7561
USB Terminal resistor On Off
DATA+ DATAN/A N/A N/A N/A ISO.GND
PWR
Rx/Tx

27.0 19.0 52.0
35.4
87.0 77.4
Top View
22.8 6.7 Left Side View Front View Right Side View
Rear View
Bottom View
tM-7561 CR Include Cable USB to Isolated RS-485 Converter (RoHS) CA-USB18 (1.8 m Cable) x 1
Accessories
USB-2560 CR CA-USB18 Industrial 4-port USB 2.0 Hub USB Type A to Type B Cable
Vol. ICNP 2.0.00
4-6-6
I-7561
USB to Isolated RS-232/422/485 Converter
I-7561
I-7561-G
Features

Fully Compliant with the USB 1.1/2.0 (High Speed) 3000 VDC Isolation Protection on the RS-232/422/485 side ESD Protection for the RS-232/422/485 Data Line Driver Supports Windows 98/ME/2000/XP/Vista (32/64bit)/7 (32/64-bit)/Linux
No External Power Supply required Automatic RS-485 Direction Control Operating Temperatures, -25 C ~ +75 C DIN-Rail Mounting
4 6
Introduction
The I-7561 is a cost-effective module for transferring serial data via USB. It allows you to connect your serial devices to systems that use a USB interface. Connecting the I-7561 to a PC, you get one RS-232/422/485 port. Like the I-7520A, the I-7561 contains "Self-Tuner" chip auto-tunes the Baud Rate and data format to the RS-485 network. The I-7561 module derives its power from the USB port and doesn't need any power adapter.
Software
System Specications
Interface USB RS-232 Serial Interface RS-422 RS-485 RS-422/485 Transmission Distance Self-Tuner Asic Inside (RS-485) Speed Connector Cable Included LED Indicators Power Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 115 mm x 35 mm DIN-Rail Mounting +5 VDC from USB 0.5 W Yes RS-232/422/485 USB Compatibility: USB 1.1 and 2.0 standards TxD, RxD, GND TxD+, TxD-, RxD+, RxDData+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps Removable 10-Pin Terminal Block Type B CA-USB18 (1.8 m Cable) x 1 The RS-232, RS-422 and RS-485 cannot be used simultaneously
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
PC

COM3 USB
tM-7561
VBUS DATA0+ DATA0iP-8411 I-7510 I-7000
GND
USB to Series Chip
RS-485 Driver
DATA1+ DATA1-
RS-232
Self-Tuner ASIC
RS-422 Driver
TxD1 +/RxD1 +/-
I-7520
RS-485
SST-2450
RxD DC
SST-2450
DC
RS-232 Driver
RxD GND
3000 VDC Isolation
4 6
35 31.5
56.0 35.4 101 115 Top View 56.0 2-SCREW M3
35
Pin Assignments
USB Terminal No. RS-485 01 02 03 I-7561 RS-422/485 04 05 06 07 RS-232 01 10 08 09 10 Pin Assignment DATA+ DATATxD+ TxDRxD+/DATA2+ RxD-/DATA2TxD RxD (B)GND (B)GND
I-7561 CR I-7561-G CR Include Cable USB to Isolated RS-485 Converter (RoHS) USB to RS-232/422/485 Converter (Gray Cover) (RoHS) CA-USB18 (1.8 m Cable) x 1
Accessories
Vol. ICNP 2.0.00
4-6-8
I-7563
USB to Isolated RS-485 Active Star Wiring Converter
I-7563
I-7563-G
Features

Fully Compliant with the USB 1.1/2.0 (High Speed) RS-485 Active Star Wiring Applications 3000 VDC Isolation Protection on the RS-485 side Driver Supports Windows 98/ME/2000/XP/Vista (32/64bit)/7 (32/64-bit)/Linux
No External Power Supply required Automatic RS-485 Direction Control ESD Protection for the RS-485 Data Line Operating Temperatures, -25 C ~ +75 C DIN-Rail Mounting
4 6
Introduction
The I-7563 is a cost-effective module for transferring serial data via USB. It allows you to connect your serial devices to systems that use a USB interface. Connecting the I-7563 to a PC, you get one COM port on system. The I-7563 contains "Self-Tuner", this chip auto-tunes the Baud Rate and data format to the RS-485 network. The I-7563 module derives its power from the USB port and doesn't need any power adapter. Do you have any RS-485 wiring problems I-7563 is a USB to 1-channel RS-485 converter with a 3-way RS-485 Hub. Each channel contains its own RS-485 driver IC, so it can support star-shaped wiring.
System Specications
Interface USB Compatibility: USB 1.1 and 2.0 standards 3 Channels: For active star wiring applications RS-485 Data1+, Data1Data2+, Data2Data3+, Data3RS-485 Transmission Distance Self-Tuner Asic Inside for RS-485 Speed Connector Cable Included LED Indicators Power Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x H x D) Installation Environment Operating Temperature Storage Temperature Humidity -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing Plastic Fire-Retardant Materials (UL94-V0 Level) 72 mm x 115 mm x 35 mm DIN-Rail Mounting +5 VDC from USB 0.5 W Yes RS-485 USB Max. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps Removable 10-Pin Terminal Block Type B CA-USB18 (1.8 m Cable) x 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
PC

VBUS DATA0+ 3000 VDC Photo-isolation RS-485 Driver DATA1+ DATA1-
COM3 USB
I-7000 I-7563 I-7000
DATA0GND
USB to Series Chip
RS-485
Self-Tuner ASIC
RS-485 Driver
DATA2+ DATA2-
I-7000
I-7513
I-7000
DC
RU-87P4
DC
RS-485 Driver
DATA3+ DATA3-
3000 VDC Isolation
4 6
35 31.5
56.0 35.4 101 115 Top View 56.0 2-SCREW M3
35
Pin Assignments
USB Terminal No. RS-485 I-7563 RS-485 01 02 03 04 05 06 07 08 01 10 RS-485 09 10 Pin Assignment DATA3+ DATA3--DATA2DATA2+ --DATA1DATA1+
I-7563 CR I-7563-G CR Include Cable USB to Isolated RS-485 Active Star Wiring Converter (RoHS) USB to Isolated RS-485 Active Star Wiring Converter (Gray Cover) (RoHS) CA-USB18 (1.8 m Cable) x 1
Accessories
Vol. ICNP 2.0.00
4-6-10
RS-232/422/485 to Fiber Optic Converter
4.7. RS-232/422/485 to Fiber Optic Converter

I-2541
RS-232/422/485 to Mulit-Mode Fiber optic converter
I-2541 I-2542 series
I-2542 series
Available soon
RS-232/422/485 to Single-Mode Fiber optic converter
Features

Automatic RS-485 Direction Control Avoids lightning strikes and EMI/RFI interference Supports +10 VDC ~ +30 VDC DIN-Rail Mounting
Optical bers enable transmission of 2 km for I-2541 and 15 km for I-2542-A/I-2542-B ESD Protection for the RS-232/422/485 Data Line Supports operating temperatures from -25 C ~ +75 C
Introduction
4 7
The I-2541 is an RS-232/422/485 to ber optic converter that secures data transmission by using ber optic transmission to provide immunity from EMI/RFI interference. The I-2541 is used for RS-232/422 point-to-point connections and RS-485 multi-drop applications for transmitting a signal up to 2 km and is the perfect solution for applications where transmission must be protected from electrical exposure, surges or chemical corrosion. The I-2542 series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, ber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new ber optic infrastructure.
System Specications
Models Interface Fiber Port Fiber Interface Wavelength Fiber Cable Distance RS-232 Serial Interface RS-422 RS-485 The RS-232, RS-422 and RS-485 cannot be used simultaneously Multi Mode; ST connector 850 nm 50/125, 62.5/125, 100/140 m 2 km, (62.5/125 m recommended) TxD, RxD, GND TxD+, TxD-, RxD+, RxDData+, DataMax. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Yes 300 ~ 115200 bps Yes Removable 8-Pin Terminal Block Yes +10 VDC ~ +30 VDC (Non-isolated) 1.5 W Plastic Fire-Retardant Materials (UL94-V0 Level) 33 mm x 89 mm x 107 mm DIN-Rail Mounting -25 C ~ +75 C -30 C ~ +75 C 10 ~ 90% RH, non-condensing 2W 4800 ~ 115200 bps Single-Mode; SC connector TX: 1310, RX: 1550 nm for I-2542-A TX: 1550, RX: 1310 nm for I-2542-B 8.3/125, 8.7/125, 9/125 or 10/125 m 15 km, (9/125 m recommended) I-2541 I-2542 series
RS-422/485 Transmission Distance Self-Tuner Asic Inside Speed ESD Protection RS-232/422/485 Connector LED Indicators Power Power Input Voltage Range Power Consumption Mechanical Casing Flammability Dimensions (W x L x H) Installation Environment Operating Temperature Storage Temperature Humidity
ICP DAS CO., LTD.
Vol. ICNP 2.0.00

DATA+ DATATxD +/RxD +/TxD RxD GND RS-232 Driver RS-422 Driver RS-485 Driver Fiber Driver TxD RxD
Self-Tuner ASIC
+10 ~ +30 VDC +Vs GND
5V Power

89.0 78.0 33.0
4 7
39.0
35.4
107.0
99.0
89.0
78.0
24.6 8.0
Left Side View
Front View
Right Side View
Rear View
Bottom View
Top View
Pin Assignments
POWER TD RD TxD RxD
Pin Assignment Fiber TxD Fiber RxD TxD+/DATA+ TxD-/DATARxD+ RxDNC GND TxD RxD
I-2541 CR I-2542-A CR I-2542-B CR RS-232/422/485 to Mulit-Mode 2 Km, ST Fiber optic converter RS-232/422/485 to Single-Mode 15 Km, SC Fiber optic converter, TX 1310 nm, RX 1550 nm (RoHS) RS-232/422/485 to Single-Mode 15 Km, SC Fiber optic converter, TX 1550 nm, RX 1310 nm (RoHS)
Terminal No. TxD RxD 01 02 03
Important Note: You must purchase both I-2542-A and I-2542-B since these products work as a pair.
1 2 3 4 5 6 7 8
04 05 06 07 08
Accessories
Vol. ICNP 2.0.00
4-7-2
RS-232/422/485 to Fiber Optic Converter
Applications
An illustration of the I-2541/I-2542 for RS-485 Devices
Note 1:
15 m up to 4000 ft 2 km
PC
RS-232
I-7520
RS-485
I-2541/I-2542
Fiber
I-2541/I-2542
RS-485
RU-87P4
Note 2: The RS-485 signal is 2-wire mode (DATA+, DATA-) Note 3: I-7520: RS-232 to RS-485 Converter
DTR DTR R DSR DSR RTS RTS CTS CTS RxD RxD TxD TxD GND GND
RS-232
DTR DTR DTR DTR DTR DATA+ DTR DTR TxD DATARxD DTR GND DTR
I-7520
RS-485
DTR DTR DTR DTR DATA+ TxD DTR DTR DATA- RxD DTR DTR DTR DTR
I-2541/ I-2542
Fiber
DTR DTR DTR DTR RxD DATA+ DTR DTR TxD DATADTR DTR DTR DTR
I-2541/ I-2542
RS-485
DTR DTR DTR DTR DATA+DTR DTR DTR DATA- DTR DTR DTR DTR DTR
Other RS-485 Device
PC
Note 1:
15 m up to 4000 ft 2 km
PC
RS-232
I-7520A
RS-422
I-2541/I-2542
Fiber
I-2541/I-2542
RS-422
PLC
4 7
Note 2: The RS-22 signal is 4-wire mode (TxD+, TxD-,RxD+, RxD-) Note 3: I-7520A: RS-232 to RS-485/422 Converter
RS-232
DTR DTR DTR TxD+ DTR TxDDTR RxD+ TxD RxDRxD DTR GND DTR
I-7520
RS-422
DTR DTR RxD+ DTR RxD- TxD TxD+ DTR TxD- RxD DTR DTR DTR DTR
I-2541/ I-2542
Fiber
DTR DTR DTR TxD+ RxD TxDDTR RxD+ TxD RxDDTR DTR DTR DTR
I-2541/ I-2542
RS-422
DTR DTR RxD+ DTR RxD- DTR TxD+ DTR TxD- DTR DTR DTR DTR DTR
Other RS-422 Device
PC
Note 1:
15 m 2 km
PC
RS-232
I-2541/I-2542
Fiber
I-2541/I-2542
RS-232
iP-8411
RS-232
DTR DTR DTR TxD+ DTR TxD DTR RxD+ TxD RxD RxD DTR GND DTR
I-2541/ I-2542
Fiber
DTR DTR DTR TxD+ RxD TxDDTR RxD+ TxD TxD DTR RxD DTR GND
I-2541/ I-2542
RS-232
RxD+ DTR RxD- DTR TxD+ DTR RxD DTR TxD DTR GND DTR
DTR
PC
Other RS-232 Devices
An illustration of the I-2541/I-2542 for RS-232/422/485 Devices
Note 1:
15 m up to 4000 ft 2 km
RS-232
PC
RS-232
I-2541/I-2542
Fiber
I-2541/I-2542
iP-8411 RU-87P4 PLC
RS-485 RS-422
Note 2: The RS-232/422/485 cannot be used simultaneously
RS-232
DTR DTR DTR TxD+ DTR TxD DTR RxD+ TxD RxD RxD DTR GND DTR
I-7520
TxD RxD GND DTR Fiber DTR DATA+ DATARxD+ RxD TxD TxD+TxD+ TxD TxDDTR RxD+ DTR RxDI-2541/ I-2542
RS-232 RS-485 RS-422

DATA+DTR DATA- DTR
RxD DTR TxD DTR GND DTR

iP-8411
RU-87P4 RxD+ DTR RxD- DTR TxD+ DTR TxD- DTR PLC
PC
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Fieldbus Solutions
5-1 Overview ----------------------------------------------------------------------------5-1-1 5-2 CAN Bus Introduction & Products ------------------------------------------------5-2-1 5-3 CANopen Introduction & Products -----------------------------------------------5-3-1 5-4 DeviceNet Introduction & Products ----------------------------------------------5-4-1 5-5 J1939 Introduction & Products ---------------------------------------------------5-5-1 5-6 PROFIBUS Introduction & Products ----------------------------------------------5-6-1 5-7 HART Introduction & Products ----------------------------------------------------5-7-1 5-8 EtherNet/IP Introduction & Products --------------------------------------------5-8-1 5-9 BACnet Introduction & Products -------------------------------------------------5-9-1
Overview
5-1 Overview
Fieldbus is an industrial network system for real-time distributed control. It is a way to connect instruments in a manufacturing plant. Fieldbus works on a network structure which typically allows daisy-chain, star, ring, branch, and tree network topologies. Fieldbus reduces both the length and the number of cables required. Fieldbus has many major advantages to all applications of automation. The technology of eldbus is mature and well accepted in various elds in markets. ICP DAS has focused on these eldbus products for several years and offers various eldbus solutions in different industrial applications, covering the entire scope of process and manufacturing automation: CAN bus, CANopen, DeviceNet, J1939, PROFIBUS, HART, EtherNet/IP and BACnet applications.
5 1
Fieldbus Solutions 5-1-1
ICP DASs Fieldbus Development Services group has been involved in the design and development of industrial eldbus and industrial Ethernet products for several years. Besides providing the various eldbus products, the rich experience and expertise helps the customer to arrange the proper system architecture and to solve the problems occurred during setting up a system. By using the ceticated IC and cetication tool, all products are reliable and compatible with other manufacturers products. Solutions for Fieldbus and industrial Ethernet In order to solve various communication problems in different eldbus and industrial Ethernet applications, ICP DAS provides converters, gateways, PC based, and PAC based solutions of fieldbus and industrial Ethernet for users. Users can choose corresponding solutions depending on various eld applications.
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
5-2 CAN Bus Introduction & Products

Introduction
ICP DAS has been developing various CAN products for several years, including PCI interface cards, converters, PACs and expansion modules. ICP DAS holds CAN conference, exhibition and training course all of the world. We also help customers to resolve various CAN technology problems. In addition, we can provide CAN bus solution for our customers.
CAN Bus Features
Multi-master When the CAN bus is free, any unit which wants to send a CAN message may start to transmit a message at the same time. Therefore, the multi-master architecture can be realized easily without message couict. The unit with the message of highest priority to be transmitted gains bus access. Safety In order to achieve the utmost safety of data transfer, powerful measures for error detection, signaling and self-checking are implemented in every CAN node. Priorities The CAN IDENTIFIER denes a static message priority during bus access. Arbitration If two or more nodes start transmitting messages at the same time, the arbitration mechanism is applied to guarantee that one of these messages can be sent successfully according to the priority.
Wi-Fi Fiber Ethernet RS-232 USB RS-422/485 Low-speed CAN Mid-speed CAN High-speed CAN High-speed CAN
H H
USB
L M H
5
RS-232 RS-422/485
2
Fieldbus Solutions
Mid-speed CAN
M M M M
Wi-Fi
Low-speed CAN
L
L
Low-speed CAN High-speed CAN

H
L
Ethernet
M
Max. 2 km
Fiber
Mid-speed CAN
High-speed CAN
H
Vol. ICNP 2.0.00
5-2-1
CAN Bus Introduction & Products
Application Stories
Concrete Station Monitor & Control System
Location: Hunan, China Product: PISO-CM100U The result of the quantity control of each recipe material seriously affects the quality of the concrete. In order to adjust each quantity promptly, CAN bus is applied. In this system, the PISO-CM100U is used to monitor the weight of each material from the load cells, and sends the recipe to the PLC. Meanwhile, the PC updates all the data to the screen. By using the user-dened rmware in the CPU of the PISO-CM100U, the PC loading can be effectively reduced, and the system becomes more smooth and reliable.
Cash-in-transit Vehicle
Location: England, United Kingdom Product: I-7530-FT A telematics and vehicle control system need to be closely integrated with each other by some data-exchange interfaces. LSFT (Low-Speed/Fault-Tolerance) CAN is a kind of familiar interfaces in the applications of automotive electronics. An I-7530-FT is specially designed for solving the interface transformation between LSFT CAN and RS-232. Through it, the cash-in-transit of the manufacturer can control the door of the cash safely and monitor the conditions of the back door directly and reliably on the telematics.
5 2
Tram Energy Recycle System
Location: Hyogo, Japan Product: I-2533 Energy saving and carbon reduction has become what every country has to strive for. Therefore, the customer applies the regenerative braking to recycle the kinetic energy of the tram while it is braking. In order to resistant environment disturbances, extend CAN bus working distance and provide the higher CAN transmission speed, a couple of I-2533s are used. By means of them, the transmission distance of CAN bus is extended via 1 km ber optics while using 500 kbps CAN baud rate.
Energy Storage System

Location: Guangdong, China Product: I-8120W, I-8057W, VP-25W1, XP-8341 This system can improve the usage efciency of the electrical power. During the off-peak time of the electricity use, the unused electricity can be stored in the battery. When the peak time is coming, these batteries supply the power to the electric grid. The customer utilizes one of the I-8120Ws in VP-25W1 to monitor the battery status, and another is used to feedback these data to the XP-8341. The XP-8341 transmits the status to the PC via Ethernet and control the charge time by the breaker.
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Selection Guide
Model Name CPU Interface Tools Description Page CAN Bus Converters & Repeaters I-2532 I-2533 I-2534 I-7531 I-7532 SG-770 I-7530 I-7530-FT I-7530A I-7530A-MR I-7540D I-7540D-MTCP I-7540D-WF I-7565 I-7565-H1 32-bit 72 MHz I-7565-H2 CAN Bus PACs I-7188XBD-CAN RS-232 x 1 and RS-485 x 1 80186, 40 MHz DI x 1 and DO x 1 Built-in MiniOS7 CAN x 1 RS-232 x 1 and RS-485 x 1 80186, 80 MHz Ethernet port x 1 Built-in MiniOS7 CAN x 1 Standalone CAN/RS-232/RS-485 PAC 5-2-8 Standalone Ethernet/CAN/RS-232/RS-485 PAC CAN x 2 Q USB 8-bit, 20 MHz 8-bit, 20 MHz 32-bit, 96 MHz 80186, 80 MHz 32-bit, 96 MHz 8-bit, 20 MHz CAN Q RS-232 VC6, VB6, VS.Net CAN Q RS-232/RS-422/ RS-485 CAN Q Ethernet CAN Q Wi-Fi CAN Q USB CAN x 1 Q USB VC6, VB6, VS.Net CAN Q Fiber CAN Q CAN x 3 CAN Q CAN CAN Q CAN CAN to ber converter CAN to ber bridge Isolated 4-port CAN bus switch Isolated CAN bus repeater Isolated CAN bus bridge 7-ch surge protector CAN to RS-232 converter Low-Speed/Fault-Tolerance CAN to RS-232 converter CAN to RS-232/RS-422/RS-485 converter CAN to Modbus RTU slave converter CAN to Ethernet converter VC6, VB6, VS.Net CAN to Modbus TCP server converter CAN to Wi-Fi converter USB to CAN converter High performance 1-port USB to CAN converter High performance 2-port USB to CAN converter 5-2-7 5-2-5 5-2-4
5-2-6
uPAC-7186EXDCAN CAN Bus Modules
Turbo C/C++ Borland C/C++ MiniOS7 Studio
5 2
Fieldbus Solutions
I-8120W 80186, 80 MHz Built-in MiniOS7 I-87120
Backplane parallel bus CAN x 1
Backplane serial bus CAN x 1
Firmware Tools: Turbo C/C++ Borland C/C++ MiniOS7 Studio MCU Tools: eVC++, VS .NET
Intelligent 1-port CAN I-8K module 5-2-8 Intelligent 1-port CAN I-87K module
CAN Bus Boards PCM-CAN100 PCM-CAN200 PCM-CAN200P PCM-CM100 PEX-CAN200i PISO-CAN100U PISO-CAN200U PISO-CAN400U PISO-CAN800U PISO-CM100U PCI-104, CAN x 1 PCI-104, CAN x 2 PC/104-Plus, CAN x 2 80186, 80 MHz PCI-104, CAN x 1 Built-in MiniOS7 PCI-E x1, CAN x 2 Universal PCI bus, CAN x 1 Universal PCI bus, CAN x 2 Universal PCI bus, CAN x 4 Universal PCI bus, CAN x 8 80186, 80 MHz Universal PCI bus, CAN x 1 Built-in MiniOS7 Firmware Tools: MiniOS7 Studio PC Tools: VC6, VB6, VS.NET VC6, VB6, VS.Net, OPC, ActiveX, RTX, DASYLab, LabVIEW Firmware Tools: MiniOS7 Studio PC Tools: VC6, VB6, VS.NET VC6, VB6, VS.Net, OPC, ActiveX, RTX, DASYLab, LabVIEW VC6, VB6, VS.Net, OPC, ActiveX, RTX, DASYLab, LabVIEW Isolated 1-port PCI-104 CAN board Isolated 2-port PCI-104 CAN board Isolated 2-port PC/104-Plus CAN board Intelligent 1-port PCI-104 CAN board Isolated 2-port PCI-Express CAN board Isolated 1-port universal PCI CAN board Isolated 2-port universal PCI CAN board Isolated 4-port universal PCI CAN board Isolated 8-port universal PCI CAN board Intelligent 1-port universal PCI CAN board 5-2-10 5-2-9
CAN Bus Power Meters PM-2133-CAN series PM-2134-CAN series CAN x 1 RS-485 x 1 CT x 3 CAN x 1 RS-485 x 1 CT x 4 3-phase compact power meter 4-loops 1-phase compact power meter 5-2-10
Vol. ICNP 2.0.00
5-2-3
Product Showcase
CAN Bus Converters & Repeaters
CAN to Fiber Converter
I-2532 CR I-2532 is a CAN to ber optic converter that secures data transmission by using ber optic transmission to provide immunity from EMS/RFI interference, which is designed to extend high CAN bus signals onto ber optic cables.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 500 kbps 2500 Vrms photocoupler isolation on the CAN side DIP switch for 120 terminator resistor of CAN bus Wave Length: 850 nm One CAN and one ber channel
Fully compatible with the ISO 11898-2 standard Watchdog inside 3 kV galvanic isolation Fiber Port: ST (Multi-mode) Fiber Cable: 62.5/125 m Congure CAN Baud by rotary switch
5 2
CAN to Fiber Bridge
I-2533 CR
NEW
I-2533 is a local CAN bridge used to establish a connection between two CAN bus system via ber optic. By using I-2533, the transmission distance limitation of the CAN bus system will not reduced because of CAN baud rate. It means that the total network distance can be extended. This feature helps users applications more powerful and exible.

Fiber Port: ST (Multi-mode) Fiber Cable: 62.5/125 m 82C250 CAN transceiver 2500 Vrms iCoupler isolation on the CAN side Fully compatible with the ISO 11898-2 standard Up to 100 CAN nodes on each channel Allow user-dened baud rate Utility tool for message lter conguration
Wave Length: 850 nm Maximum transmission distance up to 2 km at any CAN baud rate Support both CAN 2.0A and CAN 2.0B Built-in switch for 120 terminator resistor Rotary switch for CAN baud rate conguration Fiber broken line detection
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Isolated 4-port CAN Bus Switch

I-2534 CR
NEW
The I-2534 is a local CAN switch used to establish a connection between for CAN bus branches in a CAN network. It solves the problems of the daisy chain topology of the CAN bus. The transmission distance limitation of each CAN port of the I-2534 is independent, which means the total network distance can be extended.

4 CAN communication ports Compatible with CAN specication 2.0 parts A and B Support baud rate: 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M bps Message lter of each CAN port is congurable 3 kV DC-DC isolation Power requirement Unregulated +10 VDC ~ +30 VDC Humidity range 10 ~ 95% RH, non-condensing
Fully compatible with the ISO 11898-2 standard Rotary switch for the baud rate of each CAN port Supports all CAN application layer protocols based on ISO 11898-2 standard Jumper for 120 terminator resistor of CAN bus 2500 Vrms isolation Operation temperature: -25 C ~ +75 C
Isolated CAN Bus Repeater

I-7531 CR I-7531 is a CAN repeater used to establish a physical coupling of two or more segments of a CAN bus system. Users can implement tree or star topologies as well as for long drop lines with I-7531.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 800 kbps Jumper for 120 terminator resistor of CAN bus 3 kV galvanic isolation among the power supply and two CAN channels Up to 100 nodes on each CAN port DIN-Rail Mounting
Fully compatible with the ISO 11898-2 standard Watchdog inside 2500 Vrms photocoupler isolation on the CAN side Watchdog inside Two CAN channels Auto-baud detection Removable terminal block
5 2
Fieldbus Solutions
Isolated CAN Bus Bridge

I-7532 CR I-7532 is a CAN bridge to coupling different segments which can be different baud rates. It also can isolate the electronic disturances between both sides. That can protect the nodes of one side from another.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Jumper for 120 terminator resistor of CAN bus 3 kV galvanic isolation between two CAN channels Congure CAN Baud of each channel by rotary switch Removable terminal block DIN-Rail Mounting
Fully compatible with the ISO 11898-2 standard Watchdog inside 2500 Vrms photocoupler isolation on the CAN side Extend the CAN working distance Two CAN channels Up to 100 nodes on each CAN port
Vol. ICNP 2.0.00
5-2-5
7-ch Surge Protector

SG-770 CR
NEW
SG-770 offers 7 channels for surge protection. SG-770 is approved with IEC 61000-4-5 and IEC 61000-4-12 standards. Each of channels supports 0 V ~ 30 V signal and each of channels is protected for surge achieves 6 kV.

Provide 7 differential or 14 single-ended channels 6 kV Surge Protection Max. Line Voltage: 30 VDC Operating temperature: -25 C ~ +75 C Storage temperature: -30 C ~ +80 C Humidity: 10 ~ 90% RH, non-condensing
Surge Waveform follows the standard IEC 61000-4-5 and IEC 61000-4-12 Input signal type: voltage, current, thermocouple, RTD, RS485/422, RS-232, CAN bus, and FRnet Propagation delay: 1 ns
CAN to RS-232 Converter

I-7530 CR I-7530 is designed to unleash the power of CAN bus via RS-232 communication method. It converts messages between CAN networks and RS-232 networks.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Watchdog inside One CAN port and one RS-232 port Support transparent communication mode DIN-Rail Mounting
Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side Jumper for 120 terminator resistor of CAN bus 3 kV galvanic isolation Congure CAN and RS-232 parameters by utility
Low-Speed/Fault-Tolerance CAN to RS-232 Converter

I-7530-FT CR I-7530-FT is a CAN/RS-232 low speed fault tolerant converter. It can resist more noise in harsh environment, and even access CAN messages with single line of CAN bus. It can be used in the application of CAN bus monitoring, building automation, remote data acquisition, laboratory equipment & research, factory automation, etc.

Microprocessor inside with 20 MHz Fully compatible with ISO 11898-3 standard Support both CAN 2.0A and CAN 2.0B Built-in RS-232/CAN FIFO buffers Hardware watchdog design
Built-in CAN/RS-232 converter rmware Max transmission speed up to 125 kbps for CAN and 115.2 kbps for RS-232 Power, data ow and error indicator for CAN and RS-232
5 2
CAN to RS-232/RS-422/RS-485 Converter

I-7530A CR I-7530A is designed to unleash the power of CAN bus via RS-232/RS-422/RS-485 communication method. It correctly converts messages between CAN and RS-232/RS-422/RS-485 networks.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Watchdog inside One CAN, RS-232, RS-422, and RS-485 channels Support transparent communication mode DIN-Rail Mounting
Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side Jumper for 120 terminator resistor of CAN bus 3 kV galvanic isolation Congure CAN and serial COM parameters by utility
CAN to Modbus RTU Slave Converter

I-7530A-MR CR
NEW
The I-7530A-MR is a kind of CAN bus to RS-232/RS-422/RS-485 converter. Similar with I-7530A, it provides a way to connect CAN networks with programmable RS-232/RS-422/RS-485 devices. Specially, the I-7530A-MR provides Modbus protocol. This helps PLCs, HMIs, and SCADAs accessing CAN networks more easily and conveniently.

Fully compatible with the ISO 11898-2 standard Support CAN bus acceptance lter conguration Support rmware update via UART Built-in jumper to select 120 terminal resister Power, data ow and error indicator for CAN and UART Convert CAN message to specic ASCII command string Provide pair-connection communication between the RS232/485/422 devices via CAN bus
Programmable CAN bus baud rate from 5 kbps to 1 Mbps or user-dened baud rate Provide utility tool for users module setting and CAN bus communication testing conveniently Hardware Watchdog design Convert specic ASCII command string to CAN messages Provide Modbus RTU command for Modbus master device to access CAN messages
CAN to Ethernet Converter

I-7540D CR I-7540D is a solution that enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. The I-7540D controls networked communication and makes a transparent CAN-based application interface available to the user.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Watchdog inside 1 kV galvanic isolation Congure CAN, RS-232 and RS-485 parameters by web page Support for Virtual COM technology
Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side Jumper for 120 terminator resistor of CAN bus 10/100 Base-T Ethernet port One CAN, RS-232, RS-485 and Ethernet channels Provide max. 25 Ethernet clients connection
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
CAN to Modbus TCP Server Converter

I-7540D-MTCP
NEW
The I-7540D-MTCP can combine the CAN networks with the Internet/Ethernet. It can not only access the CAN network via Ethernet, but realize the CAN transparent transmission. I-7540D-MTCP also supports Modbus TCP/Modbus RTU protocol. This helps PLCs, HMIs, and SCADAs accessing CAN networks more easily and conveniently.

Compatible with CAN specication 2.0 part A and B Provide one CAN, RS-232, RS-485 and 10/100 Base-T Ethernet channels Provide utility tool for monitor and conguraion Watchdog inside 1 kV galvanic isolation
Fully compatible with the ISO 11898-2 standard Support several kinds of baud rate from 10 kbps ~ 1 Mbps Jumper for 120 terminator resistor of CAN bus Support Modbus function code: 0x03/0x04/0x10 2500 Vrms photocoupler isolation on the CAN side
CAN to Wi-Fi Converter

I-7540D-WF
NEW
The I-7540D-WF supports the wireless transmission of CAN data between two CAN networks or between a CAN network and an 802.11 b/g WLAN network. It provides the function of CAN to WLAN converter and the wireless transparent transmission method on the CAN bus network.

IEEE 802.11 b/g compliant Two different operation modes: infrastructure and ad-hoc Supports WEP, WPA and WPA2 encryption for wireless LAN Communication efciency: one-way is up to 700 fps (client->server, server->client), two-way 350 fps (client<=>server)
Wireless data transmission via WLAN Point to point or point to multi-points connection via wireless LAN Compatible with CAN specication 2.0 parts A and B Connect CAN networks via a WLAN bridge Wireless transmission distance: up to 100 meters
USB to CAN Converter

I-7565 CR I-7565 is a cost-effective device for connecting the CAN bus to PC via the standard USB interface.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Watchdog inside 3 kV galvanic isolation One CAN port and one USB channel DIN-Rail Mounting
Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side Jumper for 120 terminator resistor of CAN bus Fully compliant with USB 1.1/2.0 (Full Speed) Powered by USB port Support Windows 98/ME/2000/XP and Linux drivers
High Performance 1-port USB to CAN Converter

I-7565-H1 CR
5 2
Fieldbus Solutions
NEW
I-7565-H1 is a cost-efficient device for coupling one CAN channel to USB interface. With its powerful 32-bit microcontroller, transmission and reception processes can be controlled loss-free. OS Support: Window 98/2K/XP/Vista, Linux

Fully compatible with the ISO 11898-2 standard No external power supply (powered by USB) Programmable CAN bus baud rate from 5 kbps to 1 Mbps 3 kV galvanic isolation among the power supply Provide conguration utility to transmit/receive CAN messages Removable terminal block, DIN-Rail Mounting
Compatible with CAN specication 2.0 parts A and B Integrated with one CAN bus interface Built-in jumper for 120 terminal resister of CAN bus 2500 Vrms photocoupler isolation on the CAN side Support CAN bus acceptance lter conguration Max. data ow for a single channel: 3000 fps (standard frame)
High Performance 2-port USB to CAN Converter

I-7565-H2 CR
NEW
I-7565-H2 is a cost-efficient device for coupling two CAN channels to USB interface. With its powerful 32-bit microcontroller, transmission and reception processes can be controlled loss-free. OS Support: Window 98/2K/XP/Vista, Linux

Fully compatible with the ISO 11898-2 standard No external power supply (powered by USB) Programmable CAN bus baud rate from 5 kbps to 1 Mbps 3 kV galvanic isolation among the power supply Provide conguration utility to transmit/receive CAN messages Removable terminal block, DIN-Rail Mounting
Compatible with CAN specication 2.0 parts A and B Integrated with one CAN bus interface Built-in jumper for 120 terminal resister of CAN bus 2500 Vrms photocoupler isolation on the CAN side Support CAN bus acceptance lter conguration Max. data ow for a single channel: 3000 fps (standard frame)
Vol. ICNP 2.0.00
5-2-7
CAN Bus PACs

Standalone CAN/RS-232/RS-485 PAC
I-7188XBD-CAN CR I-7188XBD-CAN PACs (Programmable Automation Controller) are powered by 80186, 40 MHz CPU with 512 KB SRAM and Flash. It can be applied to various applications because of its CAN port, RS-232 port and RS-485 port. Uses can program their application program exibly with C/C++ language based on the built-in MiniOS7 operation system.

2500 Vrms photocoupler isolation on CAN bus Programmable transfer rate up to 1 Mbps 64-bit hardware unique serial number inside COM port: COM1, COM2 One digital Input channel and one open collector output channel Built-in ICP DASs MiniOS7
Compatible with CAN specication 2.0 parts A and B Jumper for 120 terminator resistor for CAN channel COM driver support interrupt & 1 k QUEUE input buffer Built-in RTC, NVRAM, EEPROM Built-in self-tuner ASIC controller on RS-485 port 7-segment LED display Support the CAN bus instead of the X-bus, so it can not be add-on any X-board
Standalone Ethernet/CAN/RS-232/RS-485 PAC

uPAC-7186EXD-CAN CR PAC-7186EXD-CAN PACs (programmable Automation controller) are powered by 80186, 80 MHz CPU with 512 KB SRAM and Flash. It can adapt to the many applications because of its CAN, RS-232, RS-485 and Ethernet interfaces. Uses can program their application program exibly with C/C++ language based on the MiniOS7 operation system.

Embedded MiniOS7, anti-virus 10/100 Base-T Ethernet Support for Virtual COM conguration Compatible with CAN specication 2.0 parts A and B Jumper for 120 terminator resistor for CAN channel COM port: COM1, COM2 Built-in self-tuner ASIC controller on RS-485 port
Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP 1000 VDC voltage protection on CAN side Programmable transfer rate up to 1 Mbps 64-bit hardware unique serial number inside Built-in RTC, NVRAM, EEPROM 7-segment LED display
5 2
I-8120W CR
CAN Bus Modules

Intelligent 1-port CAN I-8K Module
NEW
I-8120W has one CAN communication port with 5-Pin screw terminal connector, and is useful for a wide range of CAN applications. Users can design the various applications between different communication protocols. It supports WinPAC-8000, XPAC-8000 and ViewPAC series PACs.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Watchdog inside 8 K DPRAM inside Parallel bus communication with main unit
Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side DIP switch for 120 terminator resistor of CAN bus 3 kV galvanic isolation 80 MHz 186 CPU inside
Intelligent 1-port CAN I-87K Module

I-87120 CR I-87120 is developed to expand the CAN functions of ICP DAS products. The user-dened rmware supported by I-87120 can help users to set up the specic application easily. It supports WinPAC-8000, LinPAC-8000, XPAC-8000 and ViewPAC series PACs.

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Watchdog inside Serial bus communication with the main control unit Allow user-designed rmware
Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side DIP switch for 120 terminator resistor of CAN bus 3 kV galvanic isolation 80 MHz 186 CPU inside
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
CAN Bus Boards

Isolated 1-port PCI-104 CAN Board
PCM-CAN100 CR
NEW
The PCM-CAN100 is a PCI-104 CAN board. It complies with CAN 2.0A and CAN 2.0B specication, and can cover a wide range of CAN applications. The PCM-CAN100 provides one CAN port and one bypass CAN port. Both of them use the 9-Pin D-Sub connectors. OS Support: Win2K/XP/Vista/7/CE, Linux 2.6.31 ~ 2.6.34

PCI-104 compliant Compatible with CAN specication 2.0 parts A and B Support CAN bard from 10 kbps ~ 1 Mbps Built-in jumper to select 120 terminal resister 1 independent CAN channel and 1 bypass CAN channel Provide VB6.0, VC++6.0, Delphi, BCB6.0 demos
9-Pin male D-Sub connector Fully compatible with ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side 3 kV galvanic isolation Support LabVIEW and DASYLab drivers
Isolated 2-port PCI-104 CAN Board

PCM-CAN200 CR
NEW
The PCM-CAN200 is a CAN solution with the PCI-104 interface. It complies with CAN 2.0A and CAN 2.0B specication, and can cover a wide range of CAN applications. The PCM-CAN200 provides two CAN ports. Both of them use the 9-Pin D-Sub connectors. OS Support: Win2K/XP/Vista/7/CE, Linux 2.6.31 ~ 2.6.34

PCI-104 compliant Compatible with CAN specication 2.0 parts A and B Support CAN bard from 10 kbps ~ 1 Mbps Built-in jumper to select 120 terminal resister 2 independent CAN channels Provide VB6.0, VC++6.0, Delphi, BCB6.0 demos
9-Pin male D-Sub connector Fully compatible with ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side 3 kV galvanic isolation Support LabVIEW and DASYLab drivers
Isolated 2-port PC/104-Plus CAN Board

PCM-CAN200P CR
NEW
The PCM-CAN200P has 2 independent CAN ports with 9-Pin D-Sub connector, and is compatible with the PC/104-Plus specication. It is a economic CAN solution for the embedded system. OS Support: Win2K/XP/Vista/7/CE, Linux 2.6.31 ~ 2.6.34

PC/104-Plus compliant Compatible with CAN specication 2.0 parts A and B Support CAN bard rate from 10 kbps ~ 1 Mbps Built-in jumper to select 120 terminal resister of CAN bus 2 independent CAN ports Provide VB6.0, VC++6.0, Delphi, BCB6.0 demos
9-Pin D-Sub connector Fully compatible with ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side 3 kV galvanic isolation Support LabVIEW and DASYLab drivers
5 2
Fieldbus Solutions
Intelligent 1-port PCI-104 CAN Board

PCM-CM100 CR
Available soon
The PCM-CM100 is a PCI-104 CAN board with 80 MHz CPU and 8 kB DPRAM, and suits for high performance embedded systems. Besides, it is allowed to develop your own rmware into the board. Therefore, the complex CAN tasks can be done by the board, not PC. OS Support: Windows 2K/XP/Vista

PCI-104 compliant Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps ~ 1 Mbps Built-in jumper to select 120 terminal resister 80186, 80 MHz CPU inside Provide VB, VC++, Delphi, Borland C++ builder demos
9-Pin male D-Sub connector Fully compatible with ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side 3 kV galvanic isolation Allow users to program their special rmware Support LabVIEW and DASYLab drivers
Isolated 2-port PCI-Express CAN Board

PEX-CAN200i CR
PEX-CAN200i-D
NEW
The PEX-CAN200i series has 2 independent CAN ports with 5-Pin screw terminal connector or 9-Pin D-Sub connector with the PCI Express x 1 bus. Every CAN channel has isolation protection circuit. OS Support: Win2K/XP/Vista/7, Linux 2.6.31 ~ 2.6.34

Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Built-in jumper for 120 terminator resistor of CAN bus 3 kV galvanic isolation Direct memory mapping to the CAN controller Support LabVIEW and DASYLab drivers
Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side X1 link PCI Express 2 independent CAN channels Provide VB, VC++, Delphi, Borland C++ builder demos
PEX-CAN200i-T
Vol. ICNP 2.0.00
5-2-9
Isolated 1/2/4/8-port Universal PCI CAN Board

PISO-CAN100U CR PISO-CAN200U CR PISO-CAN400U CR PISO-CAN800U CR
PISO-CAN400U-D
The PISO-CANx00U is a economic CAN interface solution. The character x indicates the port numbers of one CAN board, and would be 1, 2, 4, or 8. The PISO-CANx00U provides 5-Pin screw terminal connector or 9-Pin D-Sub connector for different applications. OS Support: Win2K/XP/Vista/7, Linux 2.6.31 ~ 2.6.34

Universal PCI board, supports both 5 V and 3.3 V PCI bus Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side Comply with 33 MHz 32-bit 5 V universal PCI bus Provide 1/2/4/8 independent CAN channels Provide VB, VC++, Delphi, Borland C++ builder demos
Compatible with CAN specication 2.0 parts A and B Support several kinds of baud rate from 10 kbps to 1 Mbps Built-in jumper for 120 terminator resistor of CAN bus 3 kV galvanic isolation Direct memory mapping to the CAN controller Support LabVIEW and DASYLab drivers
PISO-CAN400U-T
Intelligent 1-port Universal PCI CAN Board

PISO-CM100U CR The PISO-CM100U is a Universal PCI CAN board with 80 MHz CPU and 8 kB DPRAM, and suits for time-critical applications. Besides, it is allowed to develop your own firmware into the board. Therefore, the PISO-CM100U can efciently share the CPU loading of your PC. OS Support: Windows 2K/XP/Vista

PISO-CM100U-D
Universal PCI board, supports both 5 V and 3.3 V PCI bus Support several kinds of baud rate from 10 kbps to 1 Mbps 3 kV galvanic isolation 80186, 80 MHz CPU inside Allow users to program their special rmware Support LabVIEW and DASYLab drivers
Compatible with CAN specication 2.0 parts A and B Fully compatible with the ISO 11898-2 standard 2500 Vrms photocoupler isolation on the CAN side Built-in jumper for 120 terminator resistor of CAN bus Provide VB, VC++, Delphi, Borland C++ builder demos
PISO-CM100U-T
5 2
CAN Bus Power Meters

3-phase/4-loop 1-phase Compact Power Meter
PM-2133-CAN series CR PM-2134-CAN series CR
PM-2133-CAN series
NEW NEW
PM-213X-CAN series power meter is used for gathering the real-time power consumption information by the CAN interface. It supports not only polling mode, but Auto-response mode which let the power meter automatically reply the CAN messages in the predene time period. This makes the communication m6ore efcient while building a large power monitor system.

True RMS energy and power parameters measurement in compact size RS-485 communication supported Modbus RTU protocol Wh accuracy better than 1% (PF=1) PM-2133-CAN is 3-phase power meter
Easy wiring for on-line installation CAN bus communication compatible with CAN specication 2.0B With wired clip-on CT (support input current up to 200A) PM-2134-CAN is 4-Loops 1-phase Compact power meter
PM-2134-CAN series
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
CAN bus Software

Model Name RTX CAN Driver LabVIEW CAN Driver DASYLab CAN Driver SocketCAN Device Driver PISOCANX ActiveX Object NAPOPC.CAN DA Server Description CAN bus RTX driver for PISO-CAN/PEX-CAN/PCM-CAN series boards CAN bus LabVIEW driver for PISO-CAN/PEX-CAN/PCM-CAN series boards CAN bus DASYLab driver for PISO-CAN/PEX-CAN/PCM-CAN series boards CAN bus Linux driver for PISO-CAN/PEX-CAN/PCM-CAN series boards CAN bus ActiveX object for PISO-CAN/PEX-CAN/PCM-CAN series boards CAN bus OPC Server for converters & CAN boards Page 5-2-11 5-2-11 5-2-12 5-2-12 5-2-12 5-2-12
5 2
CAN Bus RTX Driver for PISO-CAN/PEX-CAN/PCM-CAN Series Boards
RTX CAN Driver The RTX CAN Drvier helps users to develop the highly real-time CAN bus applications on Windows OS by PISO-CAN series in ICP DAS. The name and parameters of the APIs in the RTX driver are the same as in the Windows driver. Users dont need to pay more efforts to study how to use the APIs of the RTX driver.

Fieldbus Solutions
Support interrupt function if the PISO-CAN series CAN board can get the independent IRQ Direct I/O control and highly real-time feature Support Windows2000 SP4, and Windows XP SP2 OS Support RTX version 8.0 or late Provide VC 6.0 demos Real-time Test: Platform: Windows XP SP2 + PEX-CAN200i Device: I-7186EXD-CAN with MiniOS7 (single tasking OS) Method: Send and receive 10000 CAN 2.0B 8-byte messages Repeat this procedure for 10 times
CAN Bus LabVIEW Driver for PISO-CAN/PEX-CAN/PCM-CAN Series Boards

LabVIEW CAN Driver In order to apply CAN bus technology under the LabVIEW development environment. ICP DAS develops the CAN LabVIEW driver and corresponding VI elements for all PISO-CAN series CAN boards. Using LabVIEW development environment with the CAN LabVIEW driver helps users nishing their job quickly and easily, and also simply the users CAN applications.

NI LabVIEW Software version 8.0 or later OS environment: Windows 2000/XP Support CAN specication 2.0A and 2.0B Predene 8 kinds of CAN baud rate: 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k and 1M bps Allow user-dened CAN baud rate Provide 3000-record Rx buffer for each CAN port Support functions for directly accessing SJA1000 register Allow users to read the board No. and relative information Support timestamp information for each received CAN messages
Vol. ICNP 2.0.00
5-2-11
CAN Bus DASYLab Driver for PISO-CAN/PEX-CAN/PCM-CAN Series Boards

DASYLab CAN Driver DASYLab is a kind of data acquisition software. It lets you interactively develop PC-based applications by simply attaching functional icons. DASYLab offers real-time analysis, control, and the ability to create custom graphical user interfaces. In order to use DASYLab software with the PISO-CAN series boards, we provide the DASYLab CAN driver for the purpose.

Support DASYLab software version 8.0 OS environment: Windows 2000/XP Support CAN specication 2.0A and 2.0B Allow user-dened CAN baud rate Support maximum 64 CAN ports Sample rate from 50 ~ 5000 Hz Block size range is 1 ~ 4096 Provide Intel mode and Motorola mode for remote CAN device Support two kinds of languages, German and English Selectable data rates (baud): 10K, 20K, 50K, 125K, 250K, 500K, 800K, 1M, and user dened
CAN Bus Linux Driver for PISO-CAN/PEX-CAN/PCM-CAN Series Boards

SocketCAN Device Driver SocketCAN driver is a kind of device driver based on the Linux operating system, and it contains the implementation interface of the network stack and the hardware driver. The hardware manufacturers develop the hardware driver of SocketCAN driver for their hardware interface, and the network stack provides the standard BSD Socket APIs for users.

5 2
Support Linux kernel version 2.6.31~2.6.34 (x86 hardware platform only) Provide CANopen/DeviceNet master static library Standard interface for SocketCAN package. Users can use extended BSD socket APIs, you can program the CAN application as building a socket program Support Virtual CAN interface. Users can map several virtual CAN port into one physical CAN port. Each virtual CAN port has its own socket. Through these sockets, users can build the multi-thread application more easily Provide the RAW socket, CANopen master and DeviceNet master demos Good price-performance for economical applications
CAN Bus ActiveX Object for PISO-CAN/PEX-CAN/PCM-CAN Series Boards

PISOCANX ActiveX Object PISOCANX uses ActiveX technology to simply the procedure while developing the application by using PISO-CAN series CAN board. The ActiveX object (OCX) can be not only used in general program development environment, but used in the SCADA software which supports the ActiveX technology.

OS environment: Windows 2000/XP Allow polling mode and interrupt mode Provide 3000-record Rx buffer for each CAN port Support functions for directly accessing SJA1000 register Allow users to read the board No. and relative information Support timestamp information for each received CAN messages VC6, VB demos are given
CAN Bus OPC Server for Converters & CAN Boards

NAPOPC.CAN DA Server NAPOPC.CAN DA Server is a CAN OPC server to be as an expert bridge between ICP DAS CAN products and the OPC client of the third party software. Besides, it also provides the easy-to-use integral APIs to access the different CAN ports without through the OPC server.

OS environment: Windows 2000/XP Follow OPC 1.0, OPC 2.0 Data Access Standards Congure CAN baud rate with OPC utility Congure CAN hardware lter by the APIs of the Virtual CAN Driver Provide CAN Engine Utility to monitor the CAN messages Collect the data from the different CAN devices in one OPC server Provide the CAN devices and the virtual CAN port No. mapping table Load previous conguration or scan all CAN devices manually while the Virtual CAN Driver boots up Provide the APIs of the Virtual CAN Driver
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Accessories
Model Name CNT-CAN CA-0910-C CAN bus connector 9-Pin D-Sub female connector to 3-wire CAN bus cable Description Page 5-2-13 5-2-13
CAN Bus Connector

CAN Bus Connector
CNT-CAN CR
NEW
CNT-CAN connector is used for connecting a CAN bus node to the CAN bus line featuring quick-connect technology, making the stripping of bus conductors superuous. The connector is quick to install, and has a plastic housing and integrated terminating resistors. Anyway the CNT-CAN could link a CAN device to a CAN bus line easily and fast.

Built-in switch to select 120 terminal resistor 2 cable entries Cable outlet: 90 cable outlet Connector: 9-Pin, D-Sub male & female connector Programming connection : 9-Pin, D-Sub male connector
Baud rate: 10 kbps ~ 1 Mbps Operation temperature: -25 C ~ +75 C Storage temperature: -30 C ~ +80 C Humidity: 10 ~ 90% RH, non-condensing
Installation Step 1 Step 2 Step 3
5 2
CAN Bus Cable
9-Pin D-Sub Female Connector to 3-wire CAN Bus Cable
CA-0910-C
Fieldbus Solutions
NEW
The CA-0910-C, a 9-Pin D-Sub female to 3-wire CAN bus cable, is used for building build the connections between the two CAN devices which have different wiring methods. By applying this cable, the user doesnt need to make a transformation connector by himself any more.

Length: 1 meter Wire terminal: 3-wire for CAN_H, CAN_L, and CAN_GND Connector terminal : 9-pin, D-Sub female connector Baud rate: 10 kbps ~ 1 Mbps
Operating temperature: -25 C ~ +75 C Storage temperature: -30 C ~ +80 C Humidity: 10 ~ 90% RH, non-condensing
Vol. ICNP 2.0.00
5-2-13
CANopen Introduction & Products
5-3 CANopen Introduction & Products

Introduction
CANopen is a kind of network protocol based on CAN bus and has been used in various applications, such as vehicles, industrial machines, building automation, medical devices, maritime applications, restaurant appliances, laboratory equipment & research. ICP DAS has been developing CAN-based CANopen protocol products for several years. Our products include PCI interface, gateway, CANopen IO and CANopen module for ICP DASs ViewPAC/WinPAC/LinPAC/XPAC. We also help customers solving various CANopen network technology problems. In addition, we can provide comprehensive CANopen solutions for users.
5 3
CANopen Features

Comply with CANopen DS-301 v4.02 Slave series comply with CANopen DSP-401 v2.1 NMT Error Control support Node Guarding and Heartbeat protocol Provide Event-triggered, remote-requested, cyclic and acyclic SYNC of PDO mode Master series support listen mode Master series support Scan-node function Support EDS le Selectable Node-id (1 ~ 127) and baud rate (10, 20, 50, 125, 250, 500, 800, 1000 kbps) Built-in jumper or DIP switch for 120 terminator resistor of CAN bus Built-in watchdog 3000 VDC isolation for DC-to-DC 500 Vrms isolation on CAN bus
Multi-Master Feature
CANopen Master Utility
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Application Stories
Winding Machine
Product: I-8123W, CAN-2017C, CAN-2053C, CAN-5057C, WP-8441, I-8094A When the quality of motors is required to upgrade gradually, the precise and the fast motor equipment is more and more important. The high speed motor winding machine uses I-8123W to monitor and control the distributed I/O data through CANopen network. When the I-8123W gets these input data such as tension sensor, pressure sensor, and so on, the WinPAC will output the CANopen DO and the motion signal to control relay, switch, pneumatic valve, and robot to do the winding. As the CANopen features, fast and safe, it can really improve the speed and quality.
Oil-Water Separator System

Product: PISO-CPM100U, I-7532, CAN-2017C, CAN-2054C This is an oil-water separator system. The crude oil has several impurities and the majority is water. So we need to design a system to dehydrate crude oil. There are several oilwater separators spread around the control center and hundreds meters distance between each equipment. In the control center, PC receives the data that is sent by every oil-water interface detector through PISO-CPM100U and controls the water outlet valve. If the PISOCPM100U checking the water, the PC will open the water outlet valve until checks the oil. Now this system has worked in some factories.
5
Corrugated Carton Cutting Machine
Location: Taichung, Taiwan Product: WP-8441, I-87123 In this case, the orientation and cutting speeds seriously affect the quantity of output. Because all of the cutting knives and rollers must be controlled by 31 motors, the customer selects the CANopen motors to do that. The WP-8441 and I-87123 play the role of a CANopen master to control all of the motors simultaneously by the CANopen features of the synchronization and high speed. By using this architecture, all of the motors can quickly move to the target position at the same time by just sending one command.
3
Fieldbus Solutions
MRI Cooling System

Location: Guangdong, China Product: I-7232D In order to reduce the cost, a MRI manufacturer uses the chiller made in China instead of German product. However, the customer gets into trouble with the different communication interface. By using the I-7232D, this problem is solved. I-7232D can be the Modbus RTU master while talking with the chiller. In the CANopen network, I-7232D is a CANopen slave. Therefore, I-7232D can easy bypass the information of the chiller to the CANopen master, and transfer the CANopen commands to the chiller.
Vol. ICNP 2.0.00
5-3-2
Selection Guide
Model Name CANopen Gateways GW-7433D I-7231D I-7232D CANopen Modules I-7565-CPM I-8123W I-87123 CANopen Boards PISO-CPM100U PISO-CPS100U 1 1 CANopen master, universal PCI bus CANopen slave, universal PCI bus Intelligent CANopen master universal PCI board Intelligent CANopen slave universal PCI board 5-3-4 1 1 1 USB Q CANopen master CANopen master, Backplane parallel bus CANopen master, Backplane serial bus Intelligent USB to CANopen master converter Intelligent CANopen master I-8K module Intelligent CANopen master I-87K module 5-3-4 1 1 1 CANopen master Q Ethernet/RS-232/RS-485 CANopen slave Q RS-485 CANopen master to Modbus TCP/RTU slave gateway CANopen slave to DCON master gateway CANopen slave to Modbus RTU master gateway 5-3-3 CANopen Ports Interface Description Page
Product Showcase
CANopen Gateways
5 3
CANopen Master to Modbus TCP/RTU Slave Gateway

GW-7433D CR
NEW
The GW-7433D is a solution that provides a communication transformation between CANopen protocol and Modbus/ TCP protocol. It solves a mission-critical problem, and connecting an existed CANopen network with Ethernet-base master device as long as this master device supports Modbus/TCP protocol. It enables CANopen networks to be coupled together with the Internet/Ethernet, whereby remote monitoring and controlling is achieved.

CANopen Version: DS-301 v4.02 Error Control: Node Guarding protocol 2500 Vrms photocoupler isolation on the CAN side Watchdog inside PDO: Event-triggered, RTR Allow 5 Modbus TCP masters to access GW-7433 simultaneously
Emergency Message: Yes Jumper for 120 terminator resistor of CAN bus NMT: Master Support max. 50 TxPDOs, 50 RxPDOs, 15 SDOs to SDO server Conguration by utility via Ethernet 1 kV galvanic isolation
CANopen Slave to DCON Master Gateway

I-7231D CR I-7231D is a CANopen slave and a DCON master device. It can produce or consume the PDO messages, receive the SDO message with proper responses, and deal with the NMT messages from NMT master. In the DCON network, it can scan all the DCON slave device, and do the data-exchange with CANopen master.

CANopen Version: DS-301 v4.02, DSP-401 v2.01 Error Control: Node Guarding protocol 2500 Vrms photocoupler isolation on the CAN side Watchdog inside PDO: Event-triggered, RTR, cyclic, acyclic SYNC and dynamic PDO mapping
Support max. 15 I-7000/I-87K I/O series modules Jumper for 120 terminator resistor of CAN bus NMT: Slave No of SDOs: 1 server, 0 client Product EDS le dynamically by utility
CANopen Slave to Modbus RTU Master Gateway

I-7232D CR The I-7232D follows the CANopen Spec DS-301 v4.02 and DSP-401 v2.1, and supplies many features for user, such as dynamic PDO, EMCY object, error output value, SYNC cyclic and acyclic. The I-7232D supports up to 10 Modbus/RTU modules for I/O expansion User can choose DI/DO/AI/AO modules of Modubs/RTU series to t the customized practice applications.

CANopen Version: DS-301 v4.02, DSP-401 v2.01 Error Control: Node Guarding protocol 2500 Vrms photocoupler isolation on the CAN side Watchdog inside PDO: Event-triggered, RTR, cyclic, acyclic SYNC and dynamic PDO mapping
Support max. 10 Modbus RTU series modules Jumper for 120 terminator resistor of CAN bus NMT: Slave No of SDOs: 1 server, 0 client Product EDS le dynamically by utility 1 kV galvanic isolation
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
CANopen Modules
Intelligent USB to CANopen Master Converter
I-7565-CPM CR
NEW
The I-7565-CPM is an USB to CANopen master convertor. It can be applied with the USB port of the PC or notebook easily and does not need any extra power. I-7565-CPM can represent an economic solution of CANopen application and be a CANopen master device on the CANopen network.

Fully compliant with USB 1.1/2.0 (Full Speed) CANopen Version: DS-301 v4.02 Support Node Guarding and Heartbeat consumer protocol SYNC producer 1 ms ~ 65535 ms Slave Node: 127 nodes max. Windows 2000/XP drivers supported
Power by the USB interface Baud Rate: 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps Support dynamic PDO/SDO segment protocol Support auto-scan slave device function Free utility to congure I-7565-CPM and update rmware
Intelligent CANopen Master I-8K Module

I-8123W CR
NEW
The I-8123W follows CiA CANopen specication DS-301 V4.02. It is a high price/performance CANopen master. With the ViewPAC, WinPAC, or XPAC series MCU (main control unit), it can be generally applied in the industrial automation, building automation, vehicle, and embedded control network. Besides, owing to the feature of building the CANopen protocol rmware inside, users can easily access the slave devices via I-8123W without studying or dealing the complex CANopen protocol. It is helpful to reduce the development cycle time and let users set up their CANopen application more quickly and easily.

NMT Master Support Node Guarding and Heartbeat Consumer error control protocol Provide Master Listen Mode for monitor Support ViewPAC, WinPAC, and XPAC series PAC
CANopen Version: DS-301 V4.02 Provide EMCY and NMT Error Control interrupt service function Provide Dynamic PDO, acyclic and cyclic transmission
Intelligent CANopen Master I-87K Module

I-87123 CR The I-87123 module is specially designed as the master device of CANopen protocol. It supplies the user with many features, such as dynamic PDO, EMCY object, error output value, SYNC object, and etc.. It can be applied in WinPAC-8000, LinPAC-8000, XPAC-8000 and ViewPAC series PACs.

CANopen Version: DS-301 v4.02 Emergency Message: Yes DIP switch for 120 terminator resistor of CAN bus NMT: Master Provide C/C++ function libraries and demos 3 kV galvanic isolation
Error Control: Node Guarding protocol 2500 Vrms photocoupler isolation on the CAN side PDO: Event-triggered, RTR, cyclic, acyclic SYNC and dynamic PDO mapping Serial bus communication
5 3
Fieldbus Solutions
PISO-CPM100U-D
CANopen Boards
Intelligent CANopen Master Universal PCI Board
PISO-CPM100U CR The PISO-CPM100U has followed the CiA CANopen specication DS-301 V4.02. With the built-in 80186, 80 MHz CPU, this card can be applied in high transmission applications. The 16-bit on-board microcontroller with real-time O.S., MiniOS7, provides many features such as real-time message transmission and reception, ltering, preprocessing, and storage of CAN messages. It supports the timestamp of PDO message with at least 1 ms precision. Assorted with the free tool (CPM_ Utility), users can easily manage and integrate with CANopen industrial devices.

Universal PCI card, supports both 5 V and 3.3 V PCI bus CANopen Version: DS-301 v4.02 Built-in jumper for 120 terminator resistor of CAN bus NMT: Master Support multi-master architecture 3 kV galvanic isolation
Error Control: Node Guarding and Heartbeat consumer protocol 2500 Vrms photocoupler isolation on the CAN side PDO: Event-triggered, RTR, cyclic, acyclic SYNC and dynamic PDO mapping 80186, 80 MHz CPU inside
PISO-CPM100U-T
Intelligent CANopen Slave Universal PCI Board

PISO-CPS100U CR PISO-CPS100U is an especially programmable CANopen Slave board. It provides a universal PCI interface and one CAN communication port. It follows the CANopen specication DS-301 and DSP-401. With the built-in 80186, 80 MHz CPU, this board can be applied in high transmission applications. OS Support: Windows 2K/XP/Vista

PISO-CPS100U-D
Universal PCI board, supports both 5 V and 3.3 V PCI bus Built-in Dual-watchdog protection CANopen prole: DSP401, version 2.01 NMT Error Control: Node Guarding protocol & Heartbeat protocol Support dynamic PDO Programmable 512 bytes input data and 512 bytes output data Status LED: RUN, ERR Produce EDS le dynamically
CPU: 80186, 80 MHz CANopen Version: DS301, version 4.02 Baud Rate (bps): 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps SYNC consumer Support SDO segment protocol Serial bus communication Support Save and Load command Free utility to congure PISO-CPS100U and update rmware Windows 2000/XP drivers supported
PISO-CPS100U-T
Vol. ICNP 2.0.00
5-3-4
CANopen Software
Model Name Compact CANopen Library CANopen Master Utility CANopen Master InduSoft Driver Description CANopen master Library for PISO-CAN/PEX-CAN/PCM-CAN series CAN boards CANopen master utility for ICP DAS CANopen master devices CANopen master InduSoft driver for I-8123W, PISO-CPM100U and I-7565-CPM devices Page 5-3-5 5-3-5 5-3-5 5-3-5
CANopen Master LabVIEW Driver CANopen master LabVIEW driver for PISO-CPM100U and I-7565-CPM
CANopen Master Library for PISO-CAN/PEX-CAN/PCM-CAN Series CAN Boards

Compact CANopen Library We provide compact CANopen master library and CANopen diagnosis tool for PISO-CAN series CAN cards. The CANopen master library is helpful for developing an industrial application with CANopen protocol. If the monitor and diagnosis CAN network is considered, the CANopen diagnostic application tool can be used to achieve this purpose.

NMT: Master CANopen Version: DS-301 v4.02 Support up to 127 nodes Error Control: Support Guarding protocol Support EMCY receiving Provide dynamic PDO functions Support SYNC protocol Support SDO segment and block protocol Driver support Win 98/ME/NT/2K/XP and Linux
CANopen Master Utility for ICP DAS CANopen Master Devices

CANopen Master Utility In order to help users easily using the CANopen master communication boards, the PISO-CPM100(U), the CPMUtility tool is given. The utility includes several functions, such as NMT protocol, SYNC protocol, EMCY protocol, SDO protocol, PDO protocol, and so forth. These functions are useful for monitoring and controlling the CANopen devices.
5 3
Auto-scan all the CANopen slave devices on the CANopen network Support EDS le Easy to set the dynamic PDO mapping objects Guarding Event and Heartbeat Event detection EMCY message reception Maximum 5 SYNC message producers per CANopen master Support PISO-CPM100(U), I-8123W, I-87123 with rmware version 2.00 or later Support OS: WinCE5.0 and Win2K/XP/Vista/7 with 32-bit system
CANopen Master InduSoft Driver for I-8123W, PISO-CPM100U and I-7565-CPM

Devices
CANopen Master InduSoft Driver The CANopen master InduSoft driver supports many CANopen master functions for applying CANopen protocol by InduSoft SCADA software. By means of this driver, you dont need to have the complex and abstruse background knowledge of the CANopen. Only few simple steps can nish the communication between your PC and the remote CANopen devices.
Communicates with the multiple I-7565-CPM (multi-port) and PISO-CPM100 series modules at the same time Auto-detect CANopen slave devices and monitoring I/O data NMT: Master CANopen Version: DS-301 v4.02 Slave nodes support 1 ~ 127 Support Guarding and Heartbeat protocol Support EMCY and SYNC protocol Provide dynamic PDO mapping functions Support SDO segment protocol

CANopen Master LabVIEW Driver for PISO-CPM100U and I-7565-CPM

CANopen Master LabVIEW Driver To implement CANopen communication by NI LabVIEW software, We provide a set of CANopen components in the LabVIEW driver. You only need to have the basic knowledge of the CANopen protocol. Then, through few simple steps can nish the communication between your PC and the remote CANopen devices.

NMT: Master CANopen Version: DS-301 v4.02 Slave nodes support 1 ~ 127 Error Control: Support Guarding protocol Support EMCY and SYNC protocol Provide dynamic PDO functions Support SDO segment and block protocol Driver support Windows 98/ME/NT/2K/XP
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
5.4. DeviceNet Introduction & Products

Introduction
DeviceNet based on the CAN bus is one of the world's leading device-level networks for industrial automation. In fact, more than 40% of end users surveyed by independent industry analysis report choose DeviceNet over other networks. ICP DAS has been developing CAN-based DeviceNet protocol products for several years, include PCI interface cards, gateways, DeviceNet IOs and DeviceNet modules for ICP DASs PACs, XPAC/WinPAC/ViewPAC/LinPAC/iPAC series main control unit. We also help customers resolving various DeviceNet network technology problems. In addition, we can provide DeviceNet solutions for users. ICP DAS also holds DeviceNet conferences, exhibitions and training courses all over the world.
5 4
DeviceNet Features

Fieldbus Solutions
Comply with DeviceNet specication Volume I, Release 2.0 & Volume II, Release 2.0 Support Group 2 Server and UCMM connection I/O Operating Modes: Poll, Bit-Strobe, Change of State/Cyclic Master series support Auto-Search function Master series provide input 512 bytes and output 512 bytes memory size for each slave Slave series support DeviceNet heartbeat and shutdown messages Slave series provide EDS le Selectable MAC ID (0 ~ 63) and baud rate (125, 250, 500 kbps) Built-in jumper or DIP switch for 120 terminator resistor of CAN bus Built-in watchdog 3000 VDC isolation for DC-to-DC 2500 Vrms isolation on CAN bus
Multi-Master Feature
DeviceNet Master Utility
Vol. ICNP 2.0.00
5-4-1
DeviceNet Introduction & Products
Application Stories
CVD/PECVD Semiconductor Machine
Product: I-8124W, CAN-8224, XP-8341 This system utilizes XP-8341 and I-8124W as the controlling center of the remote I/ O devices. I-8124W provides DeviceNet master engine to collect the remote I/O data, including pneumatic valve MKS 683 and Beckhoff DeviceNet I/O. XP-8341 exists an operating program to control the situation in the chamber. It is important to control the reacting time of the wafer in the chamber which have some kind of gas inside. After tuning timing and pressure parameter, this series equipment has been developed successfully and works in some semiconductor factories.
LCD Glass Inspection System

Product: PISO-DNM100, CAN-2053D, CAN-2054D The system is to check that the LCD glass is good or not. Nowadays, the LCD is larger and larger. They need a system to check glass instead of human. There exists a DeviceNet network to control all remote I/O devices. The PC and PISO-DNM100U acts the DeviceNet master and accesses the remote device like sensor, barcode, robot and etc. There exists inspection software in the PC. It would make the robot to load the glass into the equipment. Complete inspecting the glass, the software would record the result of the glass and unload the glass. This system really helps nding defect glass and improving the quality of the product.
5 4
IC Inspection Machine
Location: Hsinchu, Taiwan Product: PISO-DNS100U The IC inspection process is necessary for a good quality control. Though the PLC is cheap and stable, the IC inspection is a tough work for a PLC. The customer uses PC+ camera + PISO-DNS100U to do the IC inspection, and uses PLC to control the mechanism for rejecting the defective ICs. After nishing the inspection, the PC writes the result to the PISO-DNS100U. Because the PLC is a DeviceNet master, it can easily get the information from the PISO-DNS100U via DeviceNet network.
Semiconductor Gas Detection System

Location: Kaohsiung, Taiwan Product: WP-8441, I-8124W In semiconductor factory, a lot of poison and inammable gas are widely used in various processes. In order to keep the employees safe, the gas detectors are general applied to detect the concentration of the poison and inflammable gas in the semiconductor. The customer uses WP-8441+I-8124W to be the DeviceNet master for obtaining the concentration information from the gas detectors. Besides, the present employees can immediately understand the air quality via the touch screen of the WP-8441.
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Selection Guide
Model Name DeviceNet Gateways GW-7243D GW-7434D I-7241D I-7242D DeviceNet Modules I-7565-DNM I-8124W I-87124 DeviceNet Boards PISO-DNS100U PISO-DNM100U 1 1 DeviceNet slave, universal PCI bus DeviceNet master, universal PCI bus Intelligent DeviceNet slave universal PCI board Intelligent DeviceNet master universal PCI board 5-4-5 1 1 1 USB Q DeviceNet master DeviceNet master, Backplane parallel bus DeviceNet master, Backplane serial bus Intelligent USB to DeviceNet master converter Intelligent DeviceNet master I-8K module Intelligent DeviceNet master I-87K module 5-4-4 1 1 1 1 DeviceNet slave Q Ethernet/RS-232/RS-485 DeviceNet master Q Ethernet/RS-232/RS-485 DeviceNet slave Q RS-485 DeviceNet slave to Modbus TCP/RTU/ASCII master gateway DeviceNet master to Modbus TCP/RTU slave gateway DeviceNet slave to DCON master gateway DeviceNet slave to Modbus RTU master gateway 5-4-4 DeviceNet Ports Interface Description Page
5-4-3
5
Product Showcase
DeviceNet Gateways
DeviceNet Slave to Modbus TCP/RTU/ASCII Master Gateway
GW-7243D CR
4
Fieldbus Solutions
NEW
The GW-7243D is one of DeviceNet products in ICP DAS and it stands as a DeviceNet slave to Modbus TCP/RTU/ASCII master gateway device. In DeviceNet network, it functions as a Group 2 Only Server device. In Modbus network, GW7243D sends request messages to access the Modbus slave as a master by DeviceNet object denition.

Group 2 Only Server DeviceNet subscriber Support Explicit and Poll Connection User can select the Modbus RTU/ASCII protocol for each COM port Maximum support 4 Modbus TCP devices Support Modbus function codes: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x0F and 0x10
Maximum support 10 Modbus RTU/ASCII commands for each COM port Maximum support 5 Modbus TCP commands for each Modbus TCP device Maximum support 2048 channels DI, 2048 channels DO, 1024 channels AI and 1024 channels AO for each Modbus TCP device
DeviceNet Master to Modbus TCP/RTU Slave Gateway

GW-7434D CR
NEW
The GW-7434D is a DeviceNet master to Modbus TCP/RTU master gateway device, and is applied for connecting an existing DeviceNet network to Ethernet-base PLCs and PC-based system. The GW-7434D supports Predened Master/ Slave Connection Set and Group 2 Only Server functions.

Supports maximum DeviceNet devices up to 63 Supports one Poll, one Bit-Strobe, one COS or one Cyclic IO connection for each DeviceNet device Converts single Modbus TCP to multi Modbus RTU devices, setting by Utility Supports Modbus RTU to DeviceNet master, setting by Utility
Predened Master/Slave Connection Set Supports on-line adding device into and removing device from network Supports VxComm technique for every COM ports of controllers, setting by Utility Allows multi-client access simultaneously
Vol. ICNP 2.0.00
5-4-3
DeviceNet Slave to DCON Master Gateway

I-7241D CR The I-7241D the communication gateway between DeviceNet and DCON protocol. The DCON protocol is the communication protocol used by ICP DAS I-7000 and I-87K series modules. Through I-7241d, the DeviceNet master can build the DeviceNet networt with the features of the I-7000 and I-87K series modules.

Comply with DeviceNet specication volume I, release 2.0 & volume II, release 2.0 I/O Operating Modes: Polling, Bit-Strobe, Change of State/ Cyclic Watchdog inside Support Ofine Connection Set, Device Heartbeat message and Device Shutdown message MAC ID & Baud: Conguration by utility or DeviceNet messages
Support Predened Master/Slave Connection Set (Group2 Only Server) 2500 Vrms photocoupler isolation on the CAN side Built-in jumper for 120 terminator resistor of CAN bus Provide dynamic Assembly Objects mapping Product EDS le dynamically by utility Support max. 15 I-7000/I-87K I/O series modules 3 kV galvanic isolation 1 kV galvanic isolation
DeviceNet Slave to Modbus RTU Master Gateway

I-7242D CR I-7242D allows a master located on a DeviceNet network to enter into a dialogue with the slaves on a Modbus RTU network In DeviceNet network. Its a Group 2 Only Slave device, and supports Predened Master/Slave Connection Set.

Comply with DeviceNet specication volume I, release 2.0 & volume II, release 2.0 I/O Operating Modes: Polling, Bit-Strobe, Change of State/ Cyclic Watchdog inside Support Ofine Connection Set, Device Heartbeat message and Device Shutdown message Product EDS le dynamically by utility 1 kV galvanic isolation
Support Predened Master/Slave Connection Set (Group2 Only Server) 2500 Vrms photocoupler isolation on the CAN side Built-in jumper for 120 terminator resistor of CAN bus Provide dynamic Assembly Objects mapping Allow to congure Explicit Message by using Modbus RTU protocol Support max 10 Modbus RTU series modules Device Shutdown message
DeviceNet Modules
Intelligent USB to DeviceNet Master Converter
I-7565-DNM CR
5 4
NEW
The I-7565-DNM is a convenient DeviceNet master solution of the USB interface. It can be powered by the USB interface, therefore, no other power is needed. The I-7565-CPM supports Group 2 and UCMM functions to communicate with the slave devices. It can easily control/congure DeviceNet slave nodes via PC.

Comply with DeviceNet specication volume I, release 2.0 & volume II, release 2.0 I/O Operating Modes: Polling, Bit-Strobe, Change of State/ Cyclic Built-in watchdog Provide on-line adding device into and removing device from network Provide C/C++ function libraries and demos
Support Predened Master/Slave Connection Set (Group2 Only Server) 2500 Vrms photocoupler isolation on the CAN side Built-in jumper for 120 terminator resistor of CAN bus Support UCMM function Support auto-scan slave device function Auto-reconnect when the connection is broken 3 kV galvanic isolation
Intelligent DeviceNet Master I-8K Module

I-8124W CR
NEW
The I-8124W is a high price performance solution of the DeviceNet applications. It plays the role of a DeviceNet master device on the DeviceNet network. The I-8124W supports Group 2 and UCMM functions simultaneously. It can be installed in ViewPAC, WinPAC or XPAC series PACs for expanding a DeviceNet master interface. Because of the features of the high performance and exibility, the I-8124W is popularly applied in the industrial automation, building automation, vehicle, and embedded control network. Inside the I-8124W, there is a complete DeviceNet protocol for processing the DeviceNet information. Users can easily access the slave device via the I-8124W without the complex and abstruse DeviceNet protocol background knowledge.

DeviceNet Version: Volume I & II, Release 2.0 Baud Rate: 125 K, 250 K, 500 kbps I/O Operating Modes: Poll, Bit-Strobe, Change of State/Cyclic Support auto-search slave device function Support auto-detect Group 2 and UCMM device Status LED: RUN, MS, NS
Programmable Master MAC ID and Baud Rate Support Group 2 and UCMM connection I/O Length: 512 bytes max. (Input/Output) per slave Slave Node: 63 nodes max. Support on-line adding and removing devices Auto-reconnect when the connection is broken
Intelligent DeviceNet Master I-87K Module

I-87124 CR The I-87124 represents an economic solution of the DeviceNet applications and is a DeviceNet master device on the DeviceNet network. It supports Group 2 and UCMM functions to communicate with the slave devices. Through the I-87124, the WinPAC, LinPAC, XPAC and iPAC series PACs can easy expand a DeviceNet master interface.

DeviceNet Version: Volume I & II, Release 2.0 Baud Rate: 125 K, 250 K, 500 K I/O Operating Modes: Poll, Bit-Strobe, Change of State/Cyclic Support auto-search slave device function Support auto-detect Group 2 and UCMM device Status LED: RUN, MS, NS
Programmable Master MAC ID and Baud Rate Support Group 2 and UCMM connection I/O Length: 512 bytes max. (Input/Output) per slave Slave Node: 63 nodes max. Support on-line adding and removing devices Auto-reconnect when the connection is broken
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
DeviceNet Boards
Intelligent DeviceNet Slave Universal PCI Board
PISO-DNS100U CR
PISO-DNS100U-D
NEW
The PISO-DNS100U provides the completed DeviceNet slave functions according to the DeviceNet Group 2 only server. It lets the PC play the role of the DeviceNet slave, and supports max. 10 slaves. Through the great computing power of the PC, the complex image process or control algorithm can be easily nished. OS Support: Windows 2K/XP/Vista

Universal PCI board, supports both 5 V and 3.3 V PCI bus Programmable Slave MAC ID and baud rate Support Group 2 only Server I/O Length: 512 bytes max. (Input/Output) per slave Not Support UCMM
DeviceNet Version: Volume I & II, Release 2.0 Baud Rate: 125 k, 250 k, 500 kbps I/O Modes: Poll, Bit-Strobe, Change of State/Cyclic Slave Node: Max. 10 nodes inside the board LED: Status, ERR
PISO-DNS100U-T PISO-DNM100U-D
Intelligent DeviceNet Master Universal PCI Board

PISO-DNM100U CR
NEW
The PISO-DNM100U has completed DeviceNet master functions according to the DeviceNet Group 2 only client. With the built-in 80186, 80 MHz CPU, this card can be applied in high transmission DeviceNet applications. OS Support: Windows 2K/XP/Vista

Universal PCI board, supports both 5 V and 3.3 V PCI bus Support Predened Master/Slave Connection Set (Group 2 only server) 2500 Vrms photocoupler isolation on the CAN side Built-in jumper for 120 terminator resistor of CAN bus Support UCMM function Support auto-scan slave device function Auto-reconnect when the connection is broken
Comply with DeviceNet specication volume I, release 2.0 & volume II, release 2.0 I/O Operating Modes: Polling, Bit-Strobe, Change of State/ Cyclic Built-in watchdog Provide on-line adding device into and removing device from network 3 kV galvanic isolation
PISO-DNM100U-T
5
DeviceNet Software
Model Name Description Page 5-4-5 5-4-6 5-4-6 5-4-6 Compact DeviceNet Master Library DeviceNet master Library for PISO-CAN/PEX-CAN/PCM-CAN series CAN boards DeviceNet Master Utility DeviceNet Master InduSoft Driver DeviceNet Master LabVIEW Driver DeviceNet master utility for ICP DAS DeviceNet master devices DeviceNet master InduSoft driver for I-8124W, PISO-DNM100U and I-7565-DNM devices DeviceNet master LabVIEW driver for PISO-CPM100U and I-7565-DNM
4
Fieldbus Solutions
DeviceNet Master Library for PISO-CAN/PEX-CAN/PCM-CAN Series CAN Boards

Compact DeviceNet Master Library The ICP DAS DeviceNet Master Library (DLL functions) for Windows and Liunx OS provides users to establish DeviceNet network rapidly by Master/Slave connection model. It supports PISO-CAN/PEX-CAN/PCM-CAN series CAN cards. Owing to this library, you can develop various DeviceNet.

DeviceNet Version: Volume I & II, Release 2.0 Programmable master MAC ID and baud rate Baud Rate: 125 k, 250 k, 500 kbps Support Group 2 and UCMM connection I/O Operating Modes: Poll, Bit-Strobe, Change of State/Cyclic I/O Length: 512 bytes max. (Input/Output) per slave Slave Node: 63 nodes max. Support auto-search slave device function Support on-line adding and removing devices Support auto-detect Group 2 and UCMM device Auto-reconnect when the connection is broken
Vol. ICNP 2.0.00
5-4-5
DeviceNet Master Utility for ICP DAS DeviceNet Master Devices

DeviceNet Master Utility The DNM Utility, a DeviceNet master tool for all ICP DAS master interfaces, is helpful for building the DeviceNet applications. It provides the functions for searching and diagnosing all devices in the DeviceNet network. After conguring the I/O connection, the information would be saved into the DeviceNet master hardware.

Selectable baud rat and master MAC ID Search all the DeviceNet slaves if necessary Control and monitor the I/O status of all DeviceNet slaves Function for importing and exporting the slave information Allow to update the rmware of the PISO-DNM100U and I-8124W Support Group 2 and UCMM slave devices Easy to use with the graphic human interface Support PISO-CAN/PEX-CAN/PCM-CAN series CAN cards, PISO-DNM100U, I-8124W, and I-87124W master interface
DeviceNet Master InduSoft Driver for I-8124W, PISO-DNM100U and

I-7565-DNM Devices
DeviceNet Master InduSoft Driver In order to apply the DeviceNet communication by InduSoft software, ICP DAS provides a set of the DeviceNet components in the InduSoft driver. By means of this driver, you dont need to have the complex and abstruse background of the DeviceNet protocol. Only few simple steps can nish the communication between your PC and the remote DeviceNet devices.

5 4
Integrates with InduSoft Web Studio SCADA A Tag supports max. 4 bytes data length Communicates with the Multiple I-7565-DNM (multi-port) and PISO-DNM100U series modules at the same time Programmable MAC ID Auto-detect DeviceNet slave devices and supports DeviceNet I/O monitor Support Group 2 and UCMM devices Selectable data rates (baud): 125 k, 250 k, 500 kbps
DeviceNet Master LabVIEW Driver for PISO-CPM100U and I-7565-DNM

DeviceNet Master LabVIEW Driver In order to apply the DeviceNet communication by NI LabVIEW software, ICP DAS provides a set of the DeviceNet components in the LabVIEW driver. The LabVIEW driver includes a configuration utility to configure the ICP DASs DeviceNet hardware in your PC. Through this tool, you can use LabVIEW to nish your DeviceNet application quickly and conveniently.

NI LabVIEW Software version 7.0 or later Auto detecting DeviceNet slave devices and DeviceNet I/O monitor Programmable MAC ID Provide hardware conguration tool Support UCMM capable devices Selectable data rates (baud): 125 k, 250 k, 500 k Support the Predened Master/Slave Connection Set
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
5.5. J1939 Introduction & Products

Introduction
SAE J1939 is the vehicle bus standard for communication and diagnostics among vehicle components, originally by the car and heavy duty truck industry in the United States. Because of the success of applying in vehicles, J1939 has become the accepted industry standard and the vehicle network technology of choice for off-highway machines in applications such as construction, material handling, and forestry machines. It is a higher-layer protocol based on Controller Area Network (CAN), which provides serial data communications between microprocessor systems (ECU) in any kind of heavy duty vehicles. The messages exchanged between these units can be the vehicle road speed, torque control message from the transmission to the engine, oil temperature, and so forth. All J1939 packets contain 8 bytes of data and a standard header which contains an index called PGN (Parameter Group Number), which is embedded in the message's 29-bit identier. A PGN identies a message's function and associated data. J1939 attempts to dene standard PGNs to encompass a wide range of automotive, agricultural, marine and off-road vehicle purposes. A range of PGNs (00FF0016 through 00FFFF16, inclusive) is reserved for proprietary use. PGNs dene the data which is made up of a variable number of SPN elements dened for unique data. For example, there exists a predened SPN for engine RPM. J1939 uses three methods to communicate over the CAN bus. Destination specic communications use the PDU1 (Protocol Data Unit 1) format to send and receive data. The PDU1 format allows a message to be directed to the specic ECU (CAN Node). The destination address is included in the PDU1 CAN frame. Broadcast Communications use the PDU2 (Process Data Unit 2) format to send a message to multiple nodes. The PDU2 message format identies a message number versus a node number. In this case, each node monitor the CAN bus for specic message prodened in the node conguration, and drop other messages if useless. For example a display unit may ignore all other messages until it monitors the interesting data, such as Fuel Temperature and Fuel Pressure.
5 5
Fieldbus Solutions
J1939 Features

Higher-layer protocol based on CAN bus The speed is nearly always 250 kbit/s Based on CAN 2.0B specication Used in heavy-duty vehicles Peer-to-peer and broadcast communication Up to 1785-byte data length dened in Transport rotocols Network management Denition of parameter groups
Vol. ICNP 2.0.00
5-5-1
J1939 Introduction & Products
Applications
Selection Guide
5 5
Model Name J1939 Gateways GW-7228 GW-7238D
Interface
Description
Page
J1939 Q Modbus RTU Slave J1939 Q Modbus TCP Server/RTU Slave
J1939 to Modbus RTU slave gateway J1939 to Modbus TCP Server/RTU slave gateway
5-5-2
Product Showcase
J1939 Gateways
J1939 to Modbus RTU Slave Gateway
GW-7228 CR
NEW
The GW-7228 is a solution that provides a protocol conversion between J1939 and Modbus RTU. For J1939 network, the GW-7228 supports PDU1, PDU2, broadcast and destination specic type of J1939 messages. From the view of Modbus RTU network, the GW-7228 is a Modbus RTU slave to reply the request from Modbus RTU master.

Provide PWR/J1939/MODBUS indication LEDs Watchdog inside J1939 Transport Protocol for transmission and reception of large messages (9 - 1785 bytes) Support BAM of Connection Management Message Support RS-232, RS-485 and RS-422 interfaces
Congurable for Modbus Network ID (1 ~ 250) Built-in jumper to select 120 terminal resister Transmission and reception of all types of J1939 messages, including PDU1, PDU2, broadcast and destination specic Network addresses management Support Modbus RTU slave protocol
J1939 to Modbus TCP Server/RTU Slave Gateway

GW-7238D CR
NEW
The GW-7238D is a gateway that provides conversion between J1939 and Modbus TCP/RTU protocol. For J1939 network, the GW-7238D supports PDU1, PDU2, broadcast and destination specic type of J1939 messages. For Modbus TCP/RTU network, the GW-7238D is a Modbus TCP server/RTU slave to reply the request from Modbus TCP client/RTU master.

Provide PWR/J1939/MODBUS indication LEDs Watchdog inside J1939 Transport Protocol for transmission and reception of large messages (9 - 1785 bytes) Support BAM of Connection Management Message Supports RS-232, RS-485 and Ethernet interfaces Congurable for Modbus Network ID (1 ~ 250)
Built-in jumper to select 120 terminal resister Transmission and reception of all types of J1939 messages, including PDU1, PDU2, broadcast and destination specic Network addresses management Supports Modbus TCP server/RTU slave protocol Allows 5 Modbus/TCP clients simultaneous accesses
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
5.6. PROFIBUS Introduction & Products

Introduction
PROFIBUS (PROCESS FIELD BUS) which is anchored in the international standards IEC 61158 and IEC 61784, is an open, digital communication system with a wide range of applications, particularly in the elds of factory and process automation. It is suitable for both fast, time-critical applications and complex communication tasks. ICP DAS provides a lot PROFIBUS DP products and help the user develop PROFIBUS application system easily. We have been developing and studying PROFIBUS DP for years. ICP DAS will always secure users industrial safety and stable automation system as our mission. These eldbus solutions also support multi-drop networking of devices on a single twisted-pair cable providing substantial cost savings in: Reduced wiring Commissioning and installation Plant operations and improved quality Maintenance
5
PROFIBUS Features

Baud rate up to 12 Mbit/s Maximum 244 bytes input and 244 bytes output per slave Slave conguration and parameters are set from the master side by GSD le Allow multi-master system Fast cyclic data communication between master and slave 124 slaves can be put in data exchange 32 stations on one segment
6
Fieldbus Solutions
Application Stories
Vessel Propulsion Control and Monitor System
Product: GW-7552 The propulsion system is the most important and complex part of one ocean shing vessels. It is composed of many electronic devices to control and monitor the engine speed, cooling system, residual fuel content, exhaust gas temperature, engine oil pressure, and so forth. Each of these devices may be handled by several PLCs via the different communication interfaces. In order to integrate the information from these devices, the customer uses the GW-7552 for data-exchange between the Siemens PLC and the Modbus PLC. Therefore, the HMI can collect and congure the important parameters of the propulsion systems quickly and easily through the GW-7552.
Vol. ICNP 2.0.00
5-6-1
PROFIBUS Introduction & Products
Selection Guide
Model Name PROFIBUS Repeater PROFI-2510 PROFIBUS Converters PROFI-2541 I-7550 PROFIBUS Gateways GW-7552 GW-7553 GW-7557 1 1 1 PROFIBUS DP slave Q RS-232/RS-422/RS-485 PROFIBUS DP slave Q Ethernet/RS-232 PROFIBUS DP slave Q HART master PROFIBUS slave to Modbus RTU gateway PROFIBUS slave to Modbus TCP/RTU gateway PROFIBUS slave to HART master gateway 5-6-4 1 1 PROFIBUS DP Q Fiber PROFIBUS DP slave Q RS-232/RS-422/RS-485 PROFIBUS to ber converter PROFIBUS to RS-232/RS-422/RS-485 converter 5-6-3 1 PROFIBUS DP Q PROFIBUS DP Isolated PROFIBUS repeater 5-6-2 PROFIBUS Ports Interface Description Page
Product Showcase
PROFIBUS Repeater
Isolated PROFIBUS Repeater
PROFI-2510 CR
Available soon
5 6
The PROFI-2510 is an PROFIBUS repeater adaptor. It can regenerates the electrical signal arriving on the bus line and retransmits it, so trouble in the line are mostly avoided. At the same time, it electrically isolates the receive lines from the transmit lines.

Detect transmission rate (9.6 kbps ~ 12000 kbps) on PROFIBUS automatically Can be used as a bus extension or spur line System expansion Wide range of power input (10 ~ 30 VDC) and operating temperature (-25 C ~ +75 C)
No additional space needed in the cabinet Increases the number of nodes Provide status LEDs 2500 Vrms isolation protection on PROFIBUS side 4 kV Contact ESD protection for any terminal
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
PROFIBUS Converters
PROFIBUS to Fiber Converter
PROFI-2541 CR
Available soon
The PROFI-2541 is a PROFIBUS to ber optic converter that secures data transmission through the ber to provide immunity from EMI/RFI interference. It is used for PROFIBUS point-to-point connections and suited for protecting the transmission from electrical exposure, surges or chemical corrosion.

Detect transmission rate (9.6 kbps ~ 3000 kbps) on PROFIBUS automatically Wave Length: 850 nm DIN-Rail Mounting 4 kV Contact ESD protection for any terminal
Fiber Port: ST (Multi-mode) Provide status LEDs 2500 Vrms isolation protection on PROFIBUS side Wide range of power input (10 ~ 30 VDC) and operating temperature (-25 C ~ +75 C)
5 6
Fieldbus Solutions
PROFIBUS to RS-232/RS-422/RS-485 Converter
I-7550 CR The I-7550 convert is specially designed for the slave device of PROFIBUS DP protocol. It offers RS-232, RS-422, and RS-485 communication ports. With the hybrid design of the COM1, you can choose one type of this COM port for implement. Through the I-7550, applying RS-232/RS-422/RS-485 devices into PROFIBUS network is getting easily.

Protocol & Hierarchy: DP-V0 Slave 128 bytes max. input data length 128 bytes max. output data length Support several kinds of baud for COM1 from 1.2 kbps ~ 115.2 kbps
Detect transmission rate (9.6 kbps ~ 12000 kbps) on PROFIBUS automatically PROFIBUS address 0 ~ 126 set by DIP switch Network Isolation Protection: 2500 Vrms high speed iCoupler 3000 VDC isolation protection on PROFIBUS side
Vol. ICNP 2.0.00
5-6-3
PROFIBUS Introduction & Products
PROFIBUS Gateways
PROFIBUS Slave to Modbus RTU Gateway
GW-7552 CR The GW-7552 gateway is a PROFIBUS DP slave. It allows the PROFIBUS master to access the Modbus RTU devices. In the Modbus network, the GW-7552 can be a master to access the Modbus slaves, or be a slave to provide the data from the PROFIBUS master. The exible design lets the GW-7552 widely applying in the many applications.

Protocol & Hierarchy: DP-V0 Slave 128 bytes max. input data length 131 bytes max. output data length Support RTU and ASCII Modbus format Support several kinds of baud for COM1 from 2.4 to 115.2 kbps
Detect transmission rate (9.6 kbps ~ 12000 kbps) on PROFIBUS automatically Support Modbus Master and Modbus Slave both mode PROFIBUS address 0 ~ 126 set by DIP switch Network Isolation Protection: 2500 Vrms high speed iCoupler 3000 VDC isolation protection on PROFIBUS side
PROFIBUS Slave to Modbus TCP/RTU Gateway

GW-7553 CR
NEW
The GW-7553 is used for data-exchange between the Modbus TCP/RTU network and the PROFIBUS network. It provides not only the Modbus TCP client and server functions, but the Modbus RTU master and slave functions. Therefore, the GW-7553 can satisfy most of the applications of the data transfer between Modbus and PROFIBUS.

Protocol & Hierarchy: DP-V0 & DP-V1 Slave Support one 10/100 Base-TX Ethernet port Support one RS-232 port (3-wire or 5-wire) 240 bytes max. output data length PROFIBUS address 0 ~ 126 set by DIP switch 3000 VDC isolation protection on PROFIBUS side
Detect transmission rate (9.6 kbps ~ 12000 kbps) on PROFIBUS automatically 240 bytes max. input data length Support Modbus TCP/RTU/ASCII master/slave protocol Network Isolation Protection: 2500 Vrms high speed iCoupler
PROFIBUS Slave to HART Master Gateway

GW-7557 CR
Available soon
The GW-7557 is designed for the slave device of PROFIBUS DP protocol. It allows the PROFIBUS master to access the HART slave devices. These HART devices may be a transmitter, an actuator, a current output device and so forth. Owing to the GW-7557, you can put the HART slave devices into PROFIBUS network very easily.
5 6
Protocol: PROFIBUS DP-V0 slave 240 bytes max. input data length 240 bytes max. output data length Support HART Mode: point-to-point/multi-drop Support HART Short/Long frame 3000 VDC isolation protection on PROFIBUS side
Detect transmission rate (9.6 kbps ~ 12000 kbps) on PROFIBUS automatically PROFIBUS address 0 ~ 126 set by DIP switch Support 4 HART channels, each for max. 15 HART modules Network Isolation Protection: 2500 Vrms high speed iCoupler
Accessories
Model Name CNT-PROFI PROFIBUS connector Description Page 5-6-4
PROFIBUS Connector
PROFIBUS Connector
CNT-PROFI CR
NEW
The CNT-PROFI connector is used for connecting a PROFIBUS node to the PROFIBUS line. It provides a plastic housing and integrates the terminating resistors. Owing to the CNT-PROFI connector, to install the PROFIBUS node in the PROFIBUS network would be more work quickly and easily.

Built-in switch to select 120 terminal resistor 2 cable entries Cable outlet: 90 cable outlet Connector: 9-Pin, D-Sub male connector
Baud rate: 9.6 kbps ~ 12 Mbps Operation temperature: -25 C ~ +75 C Storage temperature: -30 C ~ +80 C Humidity: 10 ~ 90% RH, non-condensing
Installation Step 1 Step 2 Step 3
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
5.7. HART Introduction & Products

Introduction
HART Field Communications Protocol extends this 4 ~ 20 mA standard to enhance communication with smart eld instruments. The protocol preserves the 4 ~ 20 mA signal and enables two-way digital communications to occur without disturbing the integrity of the 4 ~ 20 mA signal. Unlike other communication technologies, the HART protocol can maintain compatibility with existing 4 ~ 20 mA systems with a uniquely backward compatible solution. Here are two main operational modes of HART instruments: analog/ digital mode, and multi-drop mode.
Peer-to-Peer Mode
The analog and digital signals can be communicated in this mode. Here the digital signals are overlaid on the 4 ~ 20 mA loop current. Both the 4 ~ 20 mA current and the digital signal are valid output values from the instrument. The polling address of the instrument is set to "0". Only one instrument can be put on each instrument cable signal pair.
5 7
Multi-drop Mode (digital)
In this mode, only the digital signals are used. The analog loop current is xed at 4 mA. In multi-drop mode it is possible to have up to 15 instruments on one signal cable. The polling addresses of the instruments will be in the range 1 ~ 15. Each meter needs to have a unique address.
Fieldbus Solutions
HART Features
Relatively easy to understand and use, the HART protocol provides access to the wealth of additional information (variables, diagnostics, calibration, etc.) HART is a no risk solution for enhanced eld communication Risk reduction through a highly accurate and robust protocol
Compatibility with standard 4 ~ 20 mA wiring Simultaneous transmission of digital data Increase Plant Availability Reduce Maintenance Costs Improve regulatory compliance
Application Stories
Wastewater Treatment Toll Collection System
Product: HART-710 The wastewater treatment is an important issue of the environment protection all over the world. During the process of manufacture and production, the wastewater is made, and needs to be processed by the wastewater treatment plants (WWTP). The customer from the WWTP needs to know the quantity of the draining wastewater from the factories, and charges proper tolls for treating the wastewater. Therefore, the HART-710, a HART master to Modbus slave gateway, is applied to integrate the information from the Siemens ow meters into the customers HMI system. Through the HART-710, all of the ow meters will be regarded as one Modbus slave. The HMI system can use the built-in Modbus RTU communication mode to easily access the ow meters.
Vol. ICNP 2.0.00
5-7-1
HART Introduction & Products
Petrochemical GAS Pressure Detection System

Product: I-87H17W The conveying pipes are everywhere in the petrochemical plants, and used for conveying the variety liquids and gases which may be poison and ammable. The situations of these liquids and gas must be presented and handled in the control center. The customer uses the WP-8841 with the touch screen to be the HMI and control system. On the WP-8441, there is an I-8064W and an I-87H17W. The I-87H17W is a HART AI module, and is applied for received the 8 ABB pressure transmitters which monitors the gas pressure through the pipes. This control system not only displays the gas pressure on the touch screen directly, but triggers the alarm while the gas pressure exceed the upper limitation.
Selection Guide
Model Name HART Gateways HART-710 GW-7557 HART Modules I-87H17W I-87H24W 1 1 HART master, 8 current inputs HART master, 4 current outputs 8-ch current input HART master module 4-ch current output HART master module 5-7-3 1 1 HART master Q RS-232/RS-422/RS-485 HART master Q PROFIBUS DP slave HART master to Modbus RTU/ASCII slave gateway PROFIBUS slave to HART master gateway 5-7-2 HART Ports Interface Description Page
5 7
HART Converters I-7567 I-7570 1 1 HART master Q USB HART master Q RS-232/RS-422/RS-485 USB to HART master converter HART to RS-232/RS-422/RS-485 converter 5-7-3
Product Showcase
HART Gateways
HART Master to Modbus RTU/ASCII Slave Gateway
HART-710 CR
NEW
The HART-710 is a HART master to Modbus slave gateway. It provides an economic solution for Modbus master device to access the HART slave devices. In order to diagnose and congure the HART network more easily, the HART-710 Utility tool HMI is given.

Support HART Short/Long frame Support HART Burst mode Allow two HART masters Support the in point-to-point or multi-drop HART network mode Allow to connect with max. 15 HART modules
Support Modbus RTU and ASCII format Modbus Function Code: 01, 02, 03, 04, 05, 06, 15 and 16 Isolated COM1: 3-wire RS-232/RS-422/RS-485 Built-in Watchdog DIN-Rail Mounting
PROFIBUS Slave to HART Master Gateway

GW-7557 CR
Available soon
The GW-7557 is designed for the slave device of PROFIBUS DP protocol. It allows the PROFIBUS master to access the HART slave devices. These HART devices may be a transmitter, an actuator, a current output device and so forth. Owing to the GW-7557, you can put the HART slave devices into PROFIBUS network very easily.

Protocol: PROFIBUS DP-V0 slave 240 bytes max. input data length 240 bytes max. output data length Support HART Mode: point-to-point/multi-drop Support HART Short/Long frame 3000 VDC isolation protection on PROFIBUS side
Detect transmission rate (9.6 kbps ~ 12000 kbps) on PROFIBUS automatically PROFIBUS address 0 ~ 126 set by DIP switch Support 4 HART channels, each for max. 15 HART modules Network Isolation Protection: 2500 Vrms high speed iCoupler
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
HART Modules
8-ch Current Input HART Master Module
I-87H17W CR
NEW
The I-87H17W is an 8-ch HART analog input module. It can measure 4 ~ 20 mA current and act as a HART master, allowing communication with HART eld devices. Users can measure current directly without any external resistor. The I-87H17W adopts DCON protocol and can be used in WinPAC, ViewPAC, XPAC, LinPAC and iPAC series PAC.

Support 4 ~ 20 mA current input 2-wire or 4-wire transmitters of HART Support DCON protocol Open wire detection 4 kV ESD protection and 2500 VDC intra-module isolation
4-ch Current Output HART Master Module

I-87H24W CR
Available soon
The I-87H24W is a 4-ch HART analog output module. It can output 4 ~ 20 mA current and be as a HART master, allowing communication with HART eld devices. The I-87H24W supports DCON protocol dened by ICP DAS, and can be used in WinPAC, ViewPAC, XPAC, LinPAC and iPAC series PAC.

Support 4 ~ 20 mA current output 2-wire transmitters of HART Support DCON protocol Open wire detection 4 kV ESD protection and 2500 VDC intra-module isolation
HART Converters
USB to HART Master Converter
I-7567 CR
NEW
The USB interface is comprehensive applied in PCs and notebooks. In order to touch the users' requirements more closely, the I-7567 is presented. It is a USB to HART converter specially designed as the master device of HART protocol. Through it, users can easily access the HART network via USB port which is implemented as a virtual COM port on PCs or notebooks. Because the I-7567 is powered by the USB interface, the external power is not necessary. Moreover, the I-7567 provides the Utility tool which is helpful for diagnosing and conguring the HART network. If you would like to develop a HART network, the I-7567 will be a good tool to reduce your setup costs. Features

5 7
Fieldbus Solutions
Utility Features

Support HART Short/Long frame Support HART Burst mode Allow two HART masters Support the in point-to-point or multi-drop HART network mode Allow to connect with max. 15 HART modules Provide selectable 250 load resistor Compatable with USB 1.1 and 2.0 standards Powered by USB (external power is not necessary) Support rmware update via USB Provide utility tool for module conguration Built-in watchdog 4 kV ESD protection 3000 VDC intra-module isolation
Easily transmit/receive HART command for testing Provide HART device diagnostic information Provide module parameter conguration
HART to RS-232/RS-422/RS-485 Converter

I-7570 CR
NEW
The I-7570 is a Serial to HART converter specially designed as the master device of HART protocol. By using I-7570, the HART devices, such transmitters, actuators, gauges, meters, and the current output devices, can be easily integrated into the HMI/PLC/PC devices via serial port which may be RS-232/RS-422/RS-485 interface. In order to diagnose and congure the HART network more easily, the I-7570 Utility tool with friendly conguration interface is given. It is helpful for diagnosing and conguring the HART network. Through it, you can build a HART network more easily and quickly. Features

Utility Features

Support HART Short/Long frame Support HART Burst mode Allow two HART masters Support the in point-to-point or multi-drop HART network mode Allow to connect with max. 15 HART modules Provide selectable 250 load resistor Isolated COM1: 3-wire RS-232/RS-422/RS-485 Support rmware update via COM1 Provide utility tool for module conguration Provide PWR/RUN/ERR LED indicators Built-in watchdog 4 kV ESD protection DIN-Rail Mounting
Easily transmit/receive HART command for testing Provide HART device diagnostic information Provide module parameter conguration
Vol. ICNP 2.0.00
5-7-3
EtherNet/IP Introduction & Products
5.8. EtherNet/IP Introduction & Products

Introduction
EtherNet/IP is one of the open network standards, like DeviceNet and ControlNet. It is an industrial application layer protocol for industrial automation applications. EtherNet/IP uses all of the protocols of traditional Ethernet including the Transport Control Protocol (TCP), the Internet Protocol (IP) and the media access and signaling technologies. Building on standard Ethernet technologies means that EtherNet/IP will work transparently with all the standard Ethernet devices found today. EtherNet/ IP application layer is based on the Common Industrial Protocol (CIP) which is used in both DeviceNet and ControlNet. This standard organizes networked devices as a collection of objects. It denes the access, behavior and extensions, which allow vastly different devices to be accessed using a common protocol. Building on these protocols, EtherNet/IP provides a seam-less integrated system from the Industrial oor to the enterprise network. EtherNet/IP uses all the transport and control protocols of standard Ethernet including the Transport Control Protocol (TCP), the User Datagram Protocol (UDP), the Internet Protocol (IP) and the media access and signaling technologies found in off-the-shelf Ethernet technology. Building on these standard communication technologies means that EtherNet/IP works transparently with all the standard Ethernet devices found in today's market-place.
5 8
Fieldbus Solutions
EtherNet/IP Features

Offer Producer-Consumer service that enable users to control, congure and collect data. Uses exiting IEEE standards for Ethernet physical layer and data link layer Provide exible installation options leveraging commercially available industrial infrastructure products, including copper, ber, ber ring and wireless solutions. Provide robust physical layer options for industrial environments and includes the use of sealed RJ-45 and M12-4 D-coding connector. Compatible with general communication standards, including OPC, TCP/IP, HTTP, FTP, SNMP, DHCP. Use TCP port number 44818 for explicit messaging and UDP port number 2222 for implicit messaging Transfer of basic I/O data via UDP-based implicit messaging Uploading and downloading of parameters, programs and recipes via TCP Polled, cyclic and change-of-state monitoring via UDP One-to-one (unicast), one-to-many (multicast), and one-to-all (broadcast) communication via TCP
5-8-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Applications
5 8
Vol. ICNP 2.0.00
EtherNet/IP Introduction & Products
Selection Guide
Model Name Ethernet/IP Gateways GW-7472 MSM-6226 1 26 EtherNet/IP adapter Q RS-485 L2 Plus Fast Ethernet x 24 TP/SFP Gigabit Dual Media x 2 EtherNet/IP adapter to Modbus RTU master gateway 24-port L2 plus managed fast Ethernet switch + 2 TP/SFP gigabit dual media 5-8-3 Ethernet/IP Ports Interface Description Page
Product Showcase
EtherNet/IP Gateways
EtherNet/IP Adapter to Modbus RTU Master Gateway
GW-7472 CR
NEW
The GW-7472 is a EtherNet/IP adapter to Modbus RTU master gateway. It converts a network of Modbus RTU slave devices to a single node of I/O on an EtherNet/IP network. In the EtherNet/IP network, through the GW-7472, the register data read from the Modbus RTU slave are presented as the input data of the EtherNet/IP scanner. The output data transmitted by an EtherNet/IP scanner is used for updating the register data of Modbus RTU slave device. The entire network of Modbus RTU slave devices appears to the EtherNet/IP scanner as a single node of EtherNet/IP adaptor.

5 8
10/100 Base-TX Ethernet, RJ-45 x 1 (Auto-negotiating, auto MDI/MDIX, LED Indicators) Supported EtherNet/IP I/O connection methods: Transport and Trigger: Exclusive-Owner, Cyclic Original to Target Type: POINT2POINT Target to Original Type: POINT2POINT, MULTICAST Device Conguration Option: Custom software Address Conguration: DHCP, custom software Maximum number of Explicit Messaging connections: 6 Supports ARP, TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols Maximum Modbus RTU slave data mapped to EtherNet/IP input data: 500 bytes
Maximum EtherNet/IP output data mapped to Modbus RTU slave devices: 500 bytes Supported Modbus RTU Function Code 01, 02, 03, 04, 05, 06, 15, and 16 Maximum data size per Modbus slave device: 240 bytes Maximum support 30 Modbus RTU slave devices Automatically RS-485 direction control Easy rmware update via Ethernet Powered by PoE (IEEE 802.3af, Class 1) or DC jack Tiny form-factor (Width x High x Depth = 52 mm x 95 mm x 27mm) and low power consumption Made from re retardant materials (UL94-V0 Level)
24-port L2 Plus Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media
MSM-6226 CR
NEW
The MSM-6226, 24 Fast Ethernet + 2 Gigabit L2 Managed Switch, implemented 24 10/100 Mbps TP + 2 Gigabit dual media ports with TP/SFP (or GBIC), is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet and Ethernet specifications. The switch can be managed through RS-232 serial port via direct connection, or through Ethernet port using Telnet or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, congure and control each port activity in a friendly way. The overall network management is enhanced and the network efciency is also improved to accommodate high bandwidth applications.

2 Dual Media for Flexible Fiber Connection Port Mirroring helps supervisor monitoring network Support Q-in-Q (Double-tag) IEEE802.1Q tag-base VLAN for performance & security and 4094 VLAN entries IEEE802.1X Access Control improve network security IEEE802.1D Compatible, IEEE802.1w Rapid Spanning Tree & IEEE802.1s Multiple Spanning Tree Unknown Unicast/Broadcast/Multicast storm control Multicast VLAN management for IPTV IP-MAC-Port binding for LAN security
QCL Based on Application trafc for QoS and rate limitation management Support IGMPv3 snooping and IGMP Proxy Support DHCP snooping (DHCP option 82) ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny, rate limitation and port copy Support "power saving" for Green Ethernet requirement Support LLDP (Link Layer Discovery Protocol) provides a standards-based method for enabling switches to advertise themselves
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
5.9. BACnet Introduction & Products

Introduction
BACnet, a data communication protocol for building automation and control networks, is developed under the auspices of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). It is an American national standard, an European standard, a national standard in more than 30 countries, and an ISO global standard. This protocol is comprehensive applied in vastly different applications such as heating, ventilating, and air-conditioning control, lighting control, access control, and re detection systems. The BACnet protocol also provides mechanisms for computerized building automation devices to exchange information, regardless of the particular building service they perform.
BACnet Features

Designed specically for building automation control Conformance to ANSI/ASHRAE standard 135-2008 or ISO 16484-5 A completely non-proprietary open communication software standard Support several different physical and link layers (BACnet/IP, Ethernet, ARCNET, MS/TP, PTP and LonTalk) All data in a BACnet system is represented in terms of "objects", "properties" and "services" Scalability and choice of compatibility with other systems and vendors
5 9
Fieldbus Solutions
Application Stories
Commercial Building Automation System
Product: GW-5492 The customer used the SCADA, InduSoft Web Studio, with BACnet/IP driver to integrate with BACnet/IP devices and controllers in a commercial building including 210 air volume terminals, 22 air handling units, 3 chillersetc. Using GW-5492, the customer was able to integrate those Modbus RTU devices to BACnet/IP network. By doing these is to eliminate multiple protocols on the network and easy maintenance in the future. The system monitors and controls nearly 2500 physical inputs and outputs which are connected to the InduSoft residing on the BACnet/IP networks. InduSoft also congured a powerful feature that showed facility personnel peak demand trends on energy usage and sequence unit operations to minimize energy consumption. The building retains 10% energy savings each month after new system installed.
Vol. ICNP 2.0.00
5-9-1
BACnet Introduction & Products
Building Automation of a Medical Center

Product: GW-5493 The customer form a medical center used the SCADA, InduSoft Web Studio, to integrate numerous third party devices using BACnet/IP protocol including the hospital emergency power transfer switches, water booster pumps, and HVAC system. For those existing Modbus TCP devices, the customer added the GW-5493 BACnet/IP to Modbus gateway in order to make the devices accessible using BACnet/IP protocol. The system integration provides the information necessary to make complex decisions driving energy savings and properly monitor the equipment. With GTM-201, the system allows the operator to receive alarms and monitoring points via SMS messages. The building automation system also trends data regularly so that the client can use the information to track costs and troubleshoot equipment from historical data.
Selection Guide
5 9
Model Name BACnet Gateways GW-5492 GW-5493
BACnet Ports
Interface
Description
Page
1 1
BACnet/IP server Q RS-232/RS-485 BACnet/IP server Q Ethernet
BACnet/IP Server to Modbus RTU master gateway BACnet/IP Server to Modbus TCP client gateway
5-9-2
Product Showcase
BACnet Gateways
BACnet/IP Server to Modbus RTU Master Gateway
GW-5492 CR
NEW
The GW-5492 is a fully congurable universal Modbus RTU to BACnet/IP gateway. The GW-5492 includes the functions of the BACnet/IP server and Modbus RTU master, and is suited for making the Modbus RTU devices accessible on a BACnet/IP network. Besides, the GW-5492 can be congured via the web interface.

Quickly and cost effectively integrate networks Read/Write any standard Modbus registers via BACnet BIBB (BACnet Interoperability Building Blocks) supported: DS-RP-B, DS-RPM-B, DS-WP-B, DS-WPM-B, DS-COV-B, DMDDB-B, DM-DOB-B, DM-DCC-B, DMTS-B, DM-UTC-B, DMRD-B Baud rates supported: 2400, 4800, 9600, 19200, 38400, 57600 and 115200 bps
Provide PWR/Communication Status indication LED Fully compliant with BACnet/IP Server and Modbus RTU master BACnet object supported: AI, AO, AV, BI, BO, BV, MSI, MSO, MSV Supports Modbus coils, input register, holding registers No programming required Modbus register mapping table congured via web interface
BACnet/IP Server to Modbus TCP Client Gateway

GW-5493 CR
NEW
The GW-5493 is a BACnet/IP server to Modbus TCP gateway. Similar with the GW-5492, the GW-5493 provides a solution for the Modbus TCP devices connecting with the BACnet/IP network. Besides, the GW-5493 can be congured by the webpage. It is more convenient for setting the GW-5493 while applying it.

Quickly and cost effectively integrate networks Read/Write any standard Modbus registers via BACnet BIBB (BACnet Interoperability Building Blocks) supported: DS-RP-B, DS-RPM-B, DS-WP-B, DS-WPM-B, DS-COV-B, DMDDB-B, DM-DOB-B, DM-DCC-B, DMTS-B, DM-UTC-B, DMRD-B 10/100 Base-TX Ethernet Controller Modbus register mapping table congured via web interface
Provide PWR/Communication Status indication LED Fully Compliant with BACnet/IP Server and Modbus TCP Client BACnet object supported: AI, AO, AV, BI, BO, BV, MSI, MSO, MSV Supports Modbus coils, input register, holding registers No programming required
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Ethernet Switches
1.1
P1-1-1
6-1 Overview ----------------------------------------------------------------------------6-1-1 6-2 Product Showcase ------------------------------------------------------------------6-2-1

Unmanaged Ethernet Switches Managed Ethernet Switches Media Converters ------------------------------------------------------------------------------------------6-2-1 ----------------------------------------------------------------------------------------------6-2-3
----------------------------------------------------------------------------------------------------------6-2-4
Overview
6-1 Overview
Ethernet is an ideal medium to transport large volumes of data, at speed, across great distances. Previously, multiple networks carrying specic protocols were installed side by side to carry out unique tasks. This inevitably led to project costs increasing as additional ber optic or copper cables were installed to deal with the increasing volume of data. Using Ethernet a single ber optic cable can carry multiple protocols. Furthermore, manufacturers are exporting their legacy protocols onto Ethernet, designing new IP based communication protocols and providing embedded Web-Pages within devices that offer real-time information using simple tools like Internet Explorer and Netscape Navigator. Early Ethernet were based on a hub or repeater. These units have no intelligence and therefore are unable to identify any information contained within the Header frame of an Ethernet packet. This means that it is not capable of determining which port to send the frame to. Therefore, every frame is sent to every port. A switch, like a hub, has to forward and receive packets from one network or device to another. The switch could forward all packets, but if this was the case it would have similar behaviour to a hub. It would be more intelligent if the switch only forwarded packets which needed to travel from one network or device to another.
6 1
Ethernet Switches
There are many poorly designed switches existing in the market, and most of them are fragile, easy to collapse, and always suffer from transmission delay and unreliable communication conditions due to packet collisions or other issues. Users who have bad experiences with those poor switches should try our high quality ones. ICP DAS's switches only choose REAL INDUSTRIAL grade switch chips that are temperature tolerant and highly reliable. They are all well-designed by skilled engineers and passed very strict communication and environment tests. All our switches can serve for a long life and guarantee to function perfectly under harsh environment.
6-1-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Managed Switch for Industrial Ethernet Application

The managed switch can be congured through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Port-based VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. Built-in ICP DAS Cyber-Ring technique enables multiple switches to be placed into a redundant ring. Typically the switch detects and recovers from a ber or copper link failure within approximately 20 ms for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet and ber port with Modbus or OPC protocol.
6 1
Ethernet Switches 6-1-2
Vol. ICNP 2.0.00
Overview
Real-time Redundant Ring Switch

The Real-time Redundant Ring Switch offers fault-tolerant industrial Ethernet with ring network topology. The built-in ICP DAS proprietary Cyber-Ring technology detects and recovers from a ber or copper link failure within approximately 20 ms for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet and ber port with Modbus or OPC protocol. And, the relay output facility can deliver warning signal while dual power or network link fails.
Ring Switch
Ring Switch
Ring Switch
Modbus/TCP
SCADA SC S CA C AD DA A
Modbus/RTU
Backup path
Ring Switch
Managed Ethernet Switch

The ICP DAS Managed Switch provides a cost-effective managed Ethernet solution for industrial control and automation. It provides lots of powerful managed functions, such as 802.1Q Tag-based VLAN, Port-based VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. These managed functions can be congured through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the built-in Cyber-Ring technology offers real-time fault-tolerant ring topology to increase the reliability and performance of network. It is an ideal Managed Switch for industrial environments.
6 1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Cyber-Ring Ethernet Self-healing Technology

The power of applying an Ethernet LAN (Local Area Network) to factory floor or industrial automation applications is undoubtedly tremendous. However, a commercial Ethernet switch cannot meet the high reliability requirements demanded by industrial applications. To satisfy these requirements, ICP DASs Cyber-Ring technology provides you a rugged fault-tolerant, plug and play Ethernet solution. The ICP DASs proprietary Cyber-Ring self-healing Ethernet technology can establish industrial Ethernet with high reliability and fault-tolerant capability. It can employ a ring topology network over either copper or ber optic cable. While standard STP typically requires 20s to 30s for network structure reconguration following a link failure, Cyber-Ring technology reduces this downtime to within half a second. Average experience indicates a typical fault recovery time is 20 ms for Cyber-Ring faulttolerant network.
Features

High reliability and fault-tolerant Real-time deterministic performance Scalable and exible ring topology Cost-effective industrial redundant Ethernet solution Plug and play
Ring Switch
Ring Switch
Ring Switch
Modbus/TCP
SCADA
Modbus/RTU
6
Backup path
Ring Switch
1
Ethernet Switches
Recovery Time
The recovery time of Cyber-Ring network consists of two parts, fault detected time and reconguration time. Recovery time of Cyber-Ring network is associated with the number of switches of the network and Cyber-Ring technology offers a variable precongured recovery time to support a wide range of number of switches. Typically, the recovery time of Cyber-Ring network is less than 20 ms. Fault Detected Time Fault detected time is defined as the time from the occurrence of the fault until fault detected. There is a master switch of Cyber-Ring network checks the health condition of Cyber-Ring network periodically. If active path is not response after a precongured period of time, the master assumes that active path is failed and invokes reconguration mechanism to redirect trafcs to the backup path. Reconguration Time The reconguration time of Cyber-Ring network is less than 5 ms per switch. For example, a Cyber-Ring fault-tolerant network that is comprised of ten switches, the expected worst case reconguration time will be 50 ms. When a fault is detected, the Cyber-Ring network will reconfigure to provide alternative trafc path of the ring within 50 ms.
Vol. ICNP 2.0.00
6-1-4
Overview
Unmanaged Ethernet Switch

Industrial rated switches are intended to be installed in both harsh climatic environments and noisy electrical installations. Such switches are an excellent example of true industrial design principles
NS-208G NS-208A NSM-208A
Very high operating temperatures (down to -40 C and up to +75 C) DIN-Rail Mounting Wide DC operating voltages (+12 VDC ~ +48 VDC)
PoE Ethernet Switch

The PoE (Power over Ethernet) Ethernet Switch makes centralized power supply come true and provides up to 15.4 watts of power per port.
NS-205PSE NS-205PFT NSM-208PSE
Rugged M12 Ethernet Switch

The Rugged M12 Ethernet Switch is designed for industrial applications in harsh environments. The M12 connectors ensure tight, robust connections, and guarantee reliable operation, even for applications that are subject to high vibration and shock.
NSM-208-M12
NSM-208PSE-M12
6 1
Media Converter
The utilization of fiber optic data transmission for industrial automation and process control has become increasingly popular over the past decade. A basic ber optic system, using an optical transceiver circuit and ber optic media, offers a wide array of benets that are not available with traditional copper conductors.
NS-200AFC-T
NS-200AFT-T
IP67 Water Proof Switch

IP67 Ethernet Switches are designed for use in industrial waterproof/harsh environments. The rugged packaging and IP67 connectors guarantee a total protection that can withstand a variety of extreme conditions such as high temperatures, extreme shocks & vibrations, dust particles or even liquid immersion. They can be directly mounted to any machine or convenient at surface.
NS-205-IP67
NS-208-IP67
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
6.2. Product Showcase

Unmanaged Ethernet Switches
5-port 10/100 Base-TX
NS-205 CR Series NS-205A CR Series The NS-205 series has 5 Ethernet Switching ports that support 10/100 Base-TX, with a 10/100M auto negotiation feature and auto MDI/MDI-X function.

NS-205/NS-205A
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture Power Input +12 VDC ~ +56 VDC for NS-205A Reverse Polarity Protection DIN-Rail Mounting
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Store-and-forward architecture Operating temperature range: -40 C ~ +75 C
8-port 10/100 Base-TX

NS-208A CR NSM-208A CR
NSM-208A
NS-208A
NEW
The NS-208A/NSM-208A series has 8 Ethernet Switching ports that support 10/100 Base-TX, with a 10/100M auto negotiation feature and auto MDI/MDI-X function.

Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 2 Gbps high performance memory bandwidth Operating temperature range: -40 C ~ +75 C DIN-Rail Mounting
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Power Input +12 VDC ~ +48 VDC
5-port 10/100/1000 Base-T

NS-205G CR The NS-205G is 5-port unmanaged gigabit switch that support 10/100/1000 Base-T, with a 10/100/1000M auto negotiation feature and auto MDI/MDI-X function. It can connect 5 workstations and automatically switch the transmission speed (10 Mbps or 100 Mbps or 1000 Mbps) for corresponding connections.

NS-205G
Power saving Technology Each port supports 10/100 and 1000 Mbps speed auto negotiation 10 Gbps high performance memory bandwidth Power Input +10 VDC ~ +30 VDC DIN-Rail Mounting
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture Full duplex IEEE 802.3x and half duplex backpressure ow control Operating temperature range: -40 C ~ +75 C
8-port 10/100/100 Base-T

NS(M)-208G CR Series NS(M)-208AG CR Series The NS-208G/NSM-208G series has 8 Ethernet Switching ports that support 10/100/1000 Base-T, with a 10/100/1000M auto negotiation feature and auto MDI/MDI-X function. It can connect 8 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps or 1000 Mbps) for corresponding connections.

NSM-208G
NS-208G
6 2
Ethernet Switches
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 16 Gbps high performance memory bandwidth Power Input +10 VDC ~ +30 VDC for NS-208G and NSM-208G Power Input +12 VDC ~ +48 VDC for NS-208AG and NSM208AG
Each port supports 10/100 and 1000 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Operating temperature range: -40 C ~ +75 C DIN-Rail Mounting
4-port 10/100 Base-TX and 100 Base-FX Fiber

NS-205AF CR Series NSM-205AF CR Series
NS-205AFT-T NSM-205AFT-T
NEW
The NS-205AF/NSM-205AF series is a Unmanaged 4-port Industrial Ethernet (10/100 Base-TX) to Fiber Port (100 Base-FX) switch that secures data transmission by using ber optic transmission to provide immunity from EMI/RFI interference.

Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 2 Gbps high performance memory bandwidth Operating temperature range: -30 C ~ +75 C Redundant Power Inputs +12 VDC ~ +48 VDC
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Frame buffer memory: 512 Kbit
Vol. ICNP 2.0.00
6-2-1
Product Showcase
4-port 10/100 Base-TX and Dual 100 Base-FX Fiber

NS-206AF CR Series NSM-206AF CR Series
NS-206AFT-T NSM-206AFT-T
NEW
The NS-206AF/NSM-206AF series is a Unmanaged 4-port Industrial 10/100 Base-TX and Dual 100 Base-FX Switch that secures data transmission by using ber optic transmission to provide immunity from EMI/RFI interference.

Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 2 Gbps high performance memory bandwidth Redundant Power Inputs +12 VDC ~ +48 VDC Operating temperature range: -30 C ~ +75 C
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Frame buffer memory: 512 Kbit DIN-Rail Mounting
8-port 10/100 Base-TX and 100 Base-FX Fiber

NEW NS-209F CR Series NSM-209F CR Series Available soon
The NS-209F/NSM-209F series is a Unmanaged 8-port Industrial 10/100 Base-TX and one 100 Base-FX Switch that secures data transmission by using ber optic transmission to provide immunity from EMI/RFI interference.

NSM-209FT NS-209FC
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 2 Gbps high performance memory bandwidth Redundant Power Inputs +12 ~ +48 VDC for NSM-209F series Operating temperature range: 0 C ~ +70 C
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control DIN-Rail Mounting
5-port 10/100 Base-TX with IP67 Casing

NS-205-IP67 CR Series NS-205-IP67 Ethernet switch is designed for use in industrial waterproof/harsh environments.

NS-205-IP67
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 1.4 Gbps high performance memory bandwidth Power Input +10 VDC ~ +30 VDC (with 1 kV isolation Reverse Polarity Protection) Plastic casing with IP67
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Operating temperature range: -10 C ~ +60 C DIN-Rail Mounting
4-port PoE and 1 RJ-45 Uplink

NS-205PSE CR Series NS-205PSE-24V CR Series
NSM-205PSE-24V
NS-205PSE
NEW
The NS-205PSE is a 5-port unmanaged PoE (Power over Ethernet) Industrial Ethernet Switch, it supports 4-PoE Port which are classied as power source equipments (PSE).
6 2
Automatic MDI/MDI-X crossover for plug-and-play Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control 3.2 Gbps high performance memory bandwidth Power Input +46 VDC ~ +55 VDC for NS-205PSE Power Input +18 VDC ~ +32 VDC for NS/NSM-205PSE-24V DIN-Rail Mounting
Store-and-forward architecture Operating temperature range: -40 C ~ +75 C IEEE 802.3af compliant PoE ports 4-PoE Port with power sourcing equipment (PSE) operation Auto-detection of PD (powered devices) and automatic power management over-temperature, over-current and over/under-voltage detection
4-port PoE and 100 Base-FX Fiber

NS-205PF CR Series NSM-205PF CR Series
NSM-205PFT-T
NS-205PFC-T
NEW
The NS-205PF is a 5-port unmanaged PoE (Power over Ethernet) Industrial Ethernet Switch, it supports 4-PoE Port which are classied as power source equipments (PSE).

Automatic MDI/MDI-X crossover for plug-and-play Each port supports both 10/100 Mbps speed auto negotiation Store-and-forward architecture Full duplex IEEE 802.3x and half duplex backpressure ow control 3.2 Gbps high performance memory bandwidth Power Input +46 VDC ~ +55 VDC
Operating temperature range: -30 C ~ +75 C DIN-Rail Mounting IEEE 802.3af compliant PoE ports 4-PoE Port with power sourcing equipment (PSE) operation Auto-detection of PD (powered devices) and automatic power management over-temperature, over-current and over/under-voltage detection
8-port Industrial 10/100 Mbps Ethernet with 4-PoE (PSE) Switch

NS-208PSE-4 CR NSM-208PSE-4 CR
NSM-208PSE-4
NS-208PSE-4
NEW
The NS(M)-208PSE-4 is a 8-port unmanaged PoE (Power over Ethernet) Industrial Ethernet Switch, it supports 4-PoE Port which are classied as power source equipments (PSE).

ICP DAS CO., LTD.
Vol. ICNP 2.0.00
8-port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch

NS-208PSE CR NSM-208PSE CR The NS(M)-208PSE is a 8-port unmanaged PoE (Power over Ethernet) Industrial Ethernet Switch, it supports 8-PoE Port which are classied as power source equipments (PSE).

NSM-208PSE NS-208PSE
Managed Ethernet Switches

5-port Real-time Redundant Ring Switch
RS-405 CR Series RSM-405 CR Series The RS-405/RSM-405 series is a 5-port Industrial Ethernet (10/100 Base-TX) Real-time Redundant Ring Switch.

RSM-405
RS-405
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 3.2 Gbps high performance memory bandwidth Frame buffer memory: 1 Mbit Supports 2K MAC Addresses Operating temperature range: -40 C ~ +75 C
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Redundant Power Inputs +10 VDC ~ +30 VDC Power failure alarm by relay output DIN-Rail Mounting
5-port Real-time Redundant Ring Switch with 2-Fiber Port

RS-405F CR Series RSM-405F CR Series The RS-405F/RSM-405F series is a 5-port Industrial Ethernet Real-time Redundant Ring Switch with 2-Fiber Port that secures data transmission by using ber optic transmission to provide immunity from EMI/RFI interference.

RSM-405FT RS-405FC
6 2
Ethernet Switches
RSM-408 RS-408
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 3.2 Gbps high performance memory bandwidth Frame buffer memory: 512 Kbit Supports 2K MAC Addresses Operating temperature range: 0 C ~ +70 C
8-port Real-time Redundant Ring Switch

RS-408 CR Series RSM-408 CR Series The RS-408/RSM-408 series is an 8-port Industrial Ethernet (10/100 Base-TX) Real-time Redundant Ring Switch.

8-port Industrial Ethernet Layer 2 Managed Switch

MSM-508 CR The MSM-508 is an 8-port Industrial Ethernet (10/100 Base-TX) Layer 2 Managed Switch. MSM-508 supports 10/100M auto negotiation feature and auto MDI/MDI-X function.

MSM-508
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Redundant Power Inputs +12 VDC ~ +48 VDC Power failure alarm by relay output DIN-Rail Mounting and Screw hole for wall mounting kit
Vol. ICNP 2.0.00
6-2-3
Product Showcase
8-port Industrial Ethernet Layer 2 Managed Switch with 2-Fiber Port

MSM-508F CR Series The MSM-508F series is an 8-port Industrial Ethernet Layer 2 Managed Switch with 2-Fiber Port that secures data transmission by using ber optic transmission to provide immunity from EMI/RFI interference.

MSM-508FT-T MSM-508FC-T
Each port supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Redundant Power Inputs +12 VDC ~ +48 VDC Power failure alarm by relay output DIN-Rail Mounting and Screw hole for wall mounting kit
24-port Ethernet + 2 TP/SFP Gigabit Dual Media Layer 2 Managed Switch

MSM-6226
MSM-6226
NEW
The MSM-6226 is a 24-port Ethernet + 2 TP/SFP Gigabit Dual Media Layer2 Managed Switch. It's a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet and Ethernet specications.
24 ports 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection and 2 Gigabit Ethernet ports with non-blocking wise speed performance 8.8 Gbps high performance memory bandwidth Installing Chassis to a 19-Inch Wiring Closet Rail; No Wall mounting
Frame Buffer Memory: Embedded 256 KB packet buffers and 128 KB control memory 2 Dual Media for Flexible Fiber Connection Operating temperature range: -10 C ~ +60 C Power Input 100 VAC ~ 240 VAC
20-port Ethernet + 4 TP/SFP Dual Media + 2 SFP Layer 2 Gigabit Managed Switch
MSM-6226G
MSM-6226G
NEW
The MSM-6226G provides security, performance, quality of services, central management and other network control capabilities. Optimized and customized design and affordable pricing, it best t for SMB or entry-level enterprise solution.
20 ports 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection and 4 ports TP (100/1000) SFP Combo + 2 ports 100/1G SFP 52 Gbps high performance memory bandwidth
Installing Chassis to a 19-Inch Wiring Closet Rail; No Wall mounting Operating temperature range: 0 C ~ +40 C Power Input 100 VAC ~ 240 VAC
Media Converters
10/100 Base-TX to 100 Base-FX
NS-200AF CR Series The NS-200AF series is a Ethernet (10/100 Base-TX) to Media (100 Base-FX) converter. The Ethernet supports 10/100M auto negotiation feature and auto MDI/MDI-X function.

NS-200AFT-T
NS-200AFC-T
6 2
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 1.4 Gbps high performance memory bandwidth Operating temperature range: -30 C ~ +75 C Reverse Polarity Protection
Supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x ow control Frame buffer memory: 256 Kbit Power Input +12 VDC ~ +48 VDC DIN-Rail Mounting
1000 Base-T to 1000 Base-SX/LX

NS-200SX/NS-200LX
NS-200SX
NS-200LX
Available soon
NS-200SX/LX is an enhanced gigabit Ethernet to ber optic converter. Aside from its standard features, the versatile NS200SX/LX also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. NS-200SX/LX will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

Provides 1 x 1000 Mbps ber port with SC type connector for 1000 Base-SX/LX device Supports Jumbo Frames 9K bytes Provides Link Fault Pass-through (LFP)
Supports redundant +12 VDC ~ +48 VDC power input Supports wide operating temperatures from -30 C ~ +75 C (NS-200SX-T/NS-200LX-T)
Single-Strand 10/100 Base-TX to 100 Base-FX

NS-200WDM CR Series Using the ber optic medium for Ethernet applications has become more popular due to ber optic's excellent physical features, especially for long distance networks.

NS-200WDM-A NS-200WDM-B
Automatic MDI/MDI-X crossover for plug-and-play Store-and-forward architecture 1.4 Gbps high performance memory bandwidth Operating temperature range: 0 C ~ +70 C Reverse Polarity Protection
Supports both 10/100 Mbps speed auto negotiation Full duplex IEEE 802.3x and half duplex backpressure ow control Power Input +12 VDC ~ +48 VDC DIN-Rail Mounting
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Accessories
7-1 Cables -------------------------------------------------------------------------------7-1-1 7-2 Power Supplies ---------------------------------------------------------------------7-2-1 7-3 Terminal Boards & Connector -----------------------------------------------------7-3-1 7-4 USB Hub -----------------------------------------------------------------------------7-4-1
Cables
7.1. Cables
CA-0903
Pin Assignments
RTS: Pin 7 CTS: Pin 8 TxD: Pin 3 RxD: Pin 2 GND: Pin 5
Purple White Red Black Yellow
Link/Act
E1
10/100M
CTS1 RTS1 RxD1 TxD1

INIT* D2+ D2-
1
COM1 COM2
MiniOS 7
S-700
(R)+Vs
(B)GND 9
CA-0903 9-Pin Female D-Sub and RS-232 Connector Cable, 30 cm
CA-090910
Pin Assignments
TxDTxD+
Pin 9
Pin 5
RxD+ RxDGND RTS-
Pin 6
Pin 1
RTS+ CTS+ CTS-
TxD- : Pin 1 TxD+: Pin 2 RxD+: Pin 3 RxD- : Pin 4 GND : Pin 5 RTS- : Pin 6 RTS+ : Pin 7 CTS+ : Pin 8 CTS- : Pin 9
CA-090910 9-Pin Female D-Sub Cable for RS-422 Connector, 1 m
CA-0910
Pin Assignments
Link/Act
E1
RxD: Pin 3 TxD: Pin 2 GND: Pin 5
Black Red White
10/100M
CTS1 RTS1
COM1
MiniOS 7
S-700
RxD1 TxD1
INIT* D2+ D2-
COM2
(R)+Vs
(B)GND 9
7 1
Accessories
CA-0910
9-Pin Female D-Sub and 3-wire RS-232 Cable, 1 m
CA-0910F
CA-0915
Pin Assignments
9-wire Pin-to-Pin Connection
CA-0910F
CA-0910F CA-0915 9-Pin Female-Female D-Sub Cable, 1 m 9-Pin Male-Female D-Sub Cable, 1.5 m
CA-0915
7-1-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
CA-9-2505D
Pin Assignments
Pin Assignment
N/A N/A COM8_GND N/A COM7_GND N/A COM6_GND N/A COM5_GND N/A COM4_GND N/A COM3_GND
Terminal
01 02 03 04 05 06 07 08 09 10 11 12 13
No.
14 15 16 17 18 19 20 21 22 23 24 25 Shield
Pin Assignment
COM8_RxD COM8_TxD COM7_RxD COM7_TxD COM6_RxD COM6_TxD COM5_RxD COM5_TxD COM4_RxD COM4_TxD COM3_RxD COM3_TxD F.G.
Pin Terminal Assignment

GND -TxD RxD -05 04 03 02 01
No.
09 08 07 06
Pin Assignment
-----
CA-9-2505D Male DB-25 to 6 Male DB-9 Cable, 0.5 m
CA-9-3705
Pin Assignments
Pin Assignment
N.C. DCD3 GND CTS3 RxD3 RI4 DTR4 DSR4 RTS4 TxD4 DCD2 GND CTS2 RxD2 RI1 DTR1 DSR1 RTS1 TxD1
CA-9-3715D
Pin Assignment Terminal
GND DTR TxD RxD DCD 05 04 03 02 01
Terminal
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
No.
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Pin Assignment
RI3 DTR3 DSR3 RTS3 TxD3 DCD4 GND CTS4 RxD4 RI2 DTR2 DSR2 RTS2 TxD2 DCD1 GND CTS1 RxD1
No.
09 08 07 06
Pin Assignment
RI CTS RTS DSR
CA-9-3705
CA-9-3715D
RS-232 Female DB-37 Connector
CA-9-3705 CA-9-3715D Male DB-37 to 4 Male DB-9 Cable (90), 0.3 m Male DB-37 to 4 Male DB-9 Cable (180), 1.5 m
7 1
Accessories
Description +5V DataData+ Ground
CA-USB18
Pin Assignments
1 2
Pin 1 2 3 4 Name VCC DD+ GND
4 3 Type B
Type A
CA-USB18 USB Type A to Type B Cable, 1.8 m
Vol. ICNP 2.0.00
7-1-2
Power Supplies
7.2. Power Supplies

GPSU06U-6
GPSU06E-6
NEW NEW
Specications
Input Range Frequency Output Power Mechanical Dimensions (W x H x D) Installation Environmental Operating Temperature Storage Temperature 0 C ~ +40 C -20 C ~ +85 C 32 mm x 66 mm x 68 mm No-mounting 24 VDC/0.25 A max., 6 W 100 ~ 240 VAC or 127 ~ 370 VDC 50 Hz ~ 60 Hz
GPSU06U-6
GPSU06E-6
GPSU06U-6 GPSU06E-6 24 VDC/0.25 A, 6W Power Supply 24 VDC/0.25 A, 6W Power Supply with 2 pole EURO plug
MDR-20-24
MDR-60-24 MDR-60-48
NEW NEW NEW

MDR-20-24 100 ~ 250 AC 50 Hz ~ 60 Hz 24 VDC/1 A max., 24 W 22.5 x 90 x 100 DIN-Rail Mounting -20 C ~ +70 C -20 C ~ +85 C 24 VDC/2.5 A max., 60 W 40 x 90 x 100 48 VDC/1.25 A max., 60 W 40 x 90 x 100 MDR-60-24 MDR-60-48
Specications
Models Input Range Frequency Output Power Mechanical Dimensions (W x H x D) Installation Environmental Operating Temperature Storage Temperature
MDR-60-24/ MDR-20-24 MDR-60-48
MDR-20-24 MDR-60-24 MDR-60-48 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 24 VDC/2.5 A, 60 W Power Supply with DIN-Rail Mounting 48 VDC/1.25 A, 60 W Power Supply with DIN-Rail Mounting
7 2
Accessories 7-2-1
KA-52F/DIN-KA52F
Specications
Models Input Range Frequency Output Power Mechanical Dimensions (W x H x D, Unit: mm) Installation Environmental Operating Temperature Storage Temperature KA-52F
KA52F-48/DIN-KA52F-48
NEW
DIN-KA52F KA-52F-48 DIN-KA52F-48
100 ~ 250 AC 50 Hz ~ 60 Hz 24 VDC/1.04 A max., 25 W 54 x 93 x 36 No-mounting 0 C ~ +50 C -20 C ~ +85 C 68 x 107 x 50 DIN-Rail Mounting 48 VDC/0.52 A max., 25 W
KA-52F/KA-52F-48
54 x 93 x 36 No-mounting 68 x 107 x 50 DIN-Rail Mounting
KA-52F DIN-KA52F KA-52F-48 DIN-KA52F-48 24 VDC/1.04 A, 25 W Power Supply 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting 48 VDC/0.52 A, 25 W Power Supply 48 VDC/0.52 A, 25 W Power Supply with DIN-Rail Mounting
DIN-KA52F/ DIN-KA52F-48
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
DR-120-24
Specications
Models
Input Range Frequency Output Power Mechanical Dimensions (W x H x D) Installation Environmental Operating Temperature Storage Temperature
DR-120-48
NEW NEW
DR-120-24
88 ~ 264 AC 47 Hz ~ 63 Hz 24 VDC/5.0 A max., 120 W 65 mm x 125 mm x 100 mm DIN-Rail Mounting -10 C ~ +60 C -20 C ~ +85 C -25 C ~ +85 C 48 VDC/2.5 A max., 120 W
DR-120-48
DR-120-48
DR-120-24
DR-120-24 DR-120-48 24 VDC/5.0 A, 120W Power Supply with DIN-Rail Mounting 48 VDC/2.5 A, 120W Power Supply with DIN-Rail Mounting
7.3. Terminal Boards & Connector

DN-09-2
DN-09-2F
35 22.7

9.6 103
85.5 96
Top View
DN-09-2 CA-0915
Left Side View
Front View
Right Side View
Rear View
Bottom View
DN-09-2 DN-09-2F I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Header Includes: CA-0915 x 2 (9-Pin Male-Female D-Sub Cable 1.5 M) I/O Connector Block with DIN-Rail Mounting and Two 9-Pin Male Header Includes: CA-0910F x 2 (9-Pin Female-Female D-Sub Cable 1.0 M)
DN-09-2F CA-0910F
7 3
Accessories
CA-4002
CA-4002 37-Pin Male D-Sub Connector with Plastic Cover
CA-PC09F
CA-PC09F Female D-Sub Connector with Plastic Cover
Vol. ICNP 2.0.00
7-3-1
USB Hub
7.4. USB Hub

USB-2560
Features

NEW

Compliant with USB Specication Revision 2.0 Provides 4 Downstream Ports Only Supports Self-powered Mode +10 ~ + 30 VDC Power Input (power adapter included for USB-2560/S) DIN-Rail Mounting
Built-in NEC uPD720114 USB 2.0 Hub Controller Supports High-speed (480 Mbps) and Full-speed (12 Mbps) Supports Downstream Port Status with LED
Introduction
The USB-2560 allows you to add multiple high performance USB 2.0 peripheral devices to your computer (Or XP8000 series). It supports the USB 2.0 high-speed mode that can achieve 480 Mbps data transmitting rate. The USB-2560 only supports self-powered mode (drawing power from an external power supply). Externally powered USB hubs are the only way to guarantee the broadest compatibility for USB devices.
Specications
Interface Ports Compatibility Transfer Speed Supply Current Include Cable Power Supply Included (USB-2560/S Only) LED Indicators Power Downstream Ports Power Input Voltage Range Power Consumption Power Input Connection Mechanical Casing Flammability Dimensions (W x L x H) Installation Environment Operating Temperature Storage Temperature Humidity 0 C ~ +70 C -20 C ~ +80 C 10 ~ 90% RH, non-condensing Plastic UL 94V-0 materials 33 mm x 78 mm x 107 mm DIN-Rail Mounting +10 ~ + 30 VDC 0.25 A @ 24 VDC for 250 mA per port, 0.5 A @ 24 VDC for 500 mA per port Removable 3-Pin Terminal Block Upstream x 1 (Type B), Downstream x 4 (Type A) Universal serial bus; Specication Rev. 2.0/1.1/1.0 480 Mbit/s-high speed mode, 12 Mbit/s- full speed mode, 1.5 Mbit/s-low speed mode 500 mA max. per port CA-USB18 (1.8 m Cable) x 1 GPSU06U-6 x 1 for 250 mA per port 1 LED 4 LEDs
7 4
Accessories 7-4-1
USB-2560 CR USB-2560/S CR 4-port Industrial USB 2.0 Hub (RoHS) 4-port Industrial USB 2.0 Hub with GPSU06U-6 (Power Supply) (RoHS)
Accessories
DIN-KA52F MDR-20-24 GPSU06E-6 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting 24 VDC/0.25 A, 6W Power Supply with 2 pole EURO plug
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
8-1 8-2 8-3 8-4 8-5 8-6 8-7 8-8
Overview ----------------------------------------------------------------------------8-1-1 WLAN Products ---------------------------------------------------------------------8-2-1 DSSS RF Products ------------------------------------------------------------------8-3-1 2G/3G Products --------------------------------------------------------------------8-4-1 ZigBee Products --------------------------------------------------------------------8-5-1 GPS Products -----------------------------------------------------------------------8-6-1 Infrared Products ------------------------------------------------------------------8-7-1 Wireless Applications --------------------------------------------------------------8-8-1
Overview
8-1 Overview
Industrial Wireless Communication creates new prospects for automation. In the harsh environment, chemicals, vibrations, or moving parts could potentially damage cabling. Industrial Wireless Communication system substantially reduces cost and time for the installation and maintenance of the large number of cable, thus makes plants setup and reconguration easy and safe. ICP DAS provides a great variety of wireless products with modular and universal solution specially designed for industrial harsh environment.
8 1
8-1-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
8-2 WLAN Products

WLAN (Wireless Local Area Network) links devices by wireless distribution method (spreadspectrum or OFDM radio), and generally provides a connection through an access point to the internet. WLAN allows users to move device within a local coverage area, and still be connected to the network. High-bandwidth allocation for wireless will make a relatively lowcost wiring possible. ICP DAS provides a great variety of WLAN products which are compliant with standard of IEEE 802.11. The WLAN products have two modes: Ad-hoc and Infrastructure. Advantages & Benets Build a wireless network via Wi-Fi technology. There is no need to build an expansive xed line network. Enable CAN/Serial/Ethernet device to be connected to the same network via Wi-Fi without any cable. Use widely available IEEE 802.11 (Wi-Fi) or Ethernet network infrastructure. Support IEEE 802.11 b/g for Wi-Fi and Ad Hoc modes. Secure data access with WEP, WPA, WPA2.
M2M-711D I-7540D-WF
WLAN Selection Guide

WLAN Remote Maintenance Device
Model Name M2M-711D Interface 5-wire RS-232 x 1 2-wire RS-485 x 1 10/100M Ethernet x 1 WiFi standard IEEE 802.11 b/g Client/Server Data rate: up to 54 Mbps (Auto scaling) Data Encryption 64/128-bit WEP, WPA-TKIP and WPA2-AES
CAN to WiFi
Model Name Interface CAN bus x 1 (CAN 2.0A/B) 3-wire RS-232 x 1 (conguration) WiFi standard IEEE 802.11 b/g Client/Server Data rate: up to 54 Mbps (Auto scaling) Data Encryption
I-7540D-WF
64/128-bit WEP, WPA-TKIP and WPA2-AES
8
LAN to WLAN Converter
Model Name T-316 Interface 10/100M Ethernet WiFi standard IEEE 802.11 b Client Data rate: 11 M, 5.5M, 1 Mbps (Auto scaling) Data Encryption 64/128-bit WEP
Vol. ICNP 2.0.00
8-2-1
DSSS RF Products
8-3 DSSS RF Products

DSSS RF (direct-sequence spread spectrum) is a modulation technique, which is the process of varying one or more properties of a high frequency periodic wave called the carrier signal, with respect to a modulating signal. The benefits of using DSSS include, but not limited to, 1) reduced signal/background-noise level hampers interception and 2) resistance to intended or unintended jamming. ICP DAS provides SST series which is designed for data acquisition control applications between a host and remote sensors. It is also useful for those applications where the installation of cable wire is inconvenient. Advantages & Benets Full-duplex and Half-duplex up to 57600 bps Auto band-rate settings Direct sequence spread spectrum using RF technology Reduce wiring cost and inconvenience
DSSS RF Selection Guide

Model Name SST-900B SST-2450 Frequency 900 MHz (902-928 MHz) 2.4 GHz (2410.496 MHz ~ 2471.936 MHz) Interface RS-232/RS-485 RS-232/RS-485
SST-2450
SST-900B
Transmission Range Typical 700 m, Max. 1 km 300 m (Typical)
Wireless Modem Network
8 3
8-3-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
8-4 2G/3G Products

ICP DAS 2G/3G wireless solutions are uniquely designed to meet the challenges of implementing and managing a small, medium and large number of unmanned remote devices as well as mobile terminals using the 2G/3G telecom network. The ICP DAS 2G/3G wireless system is comprised of intelligent 2G/3G modems with versatile interfaces, a 2G/3G Data Server (DS), and 2G/3G PACs with embedded dynamic IP resolution technology to help system integrators and application service providers can quickly integrate 2G/3G technology into their own solutions, and save development time with reduced costs and assured performance. Advantages & Benets There is no need to build an expensive xed line network. Enable any devices to be connected to the Internet via serial port over a 2G/3G network. The most efcient method of handling data over a 2G/3G wireless network and the Internet. A full turnkey solution that is designed for both xed and mobile machine to machine applications. Reliable GSM/GPRS/EDGE/UMTS/HSPA network connectivity, providing fast and cost-effective longrange wireless applications
GT-530 WISE-4000
2G/3G Selection Guide

Stand Alone Modem
Model Name Frequency (MHz) 2G (GSM/GPRS): 850/900/1800/1900 2G (GSM/GPRS): 850/900/1800/1900 2G (GSM/GPRS): 850/900/1800/1900 GTM-201-3GWA 3G (UMTS/HSDPA/ HSUPA): 2100/1900/850 2G (GSM/GPRS): 850/900/1800/1900 GTM-201P-3GWA 3G (UMTS/HSDPA/ HSUPA): 2100/1900/850 Yes Yes Yes Yes 9.6K~115.2K Yes Yes Yes 9.6K~115.2K Reset Input Yes MIC Input/ Audio utput Yes GPS TCP/IP Stack Yes Baud Rate (bps) 9.6K~115.2K Interface Driver Windows XP/7 Windows CE Linux Windows XP/7 Windows CE Linux Windows XP/7 Windows CE Linux
GTM-201-RS232
RS-232
GTM-201-USB
Yes
Yes
Yes
9.6K~115.2K
USB2.0
USB2.0 RS-232
USB2.0 RS-232 GPS
Windows XP/7 Windows CE Linux
2G/3G Module for PACs

Model Name I-8212W I-8213W Frequency (MHz) 2G (GSM/GPRS): 850/900/1800/1900 2G (GSM/GPRS): 850/900/1800/1900 2G (GSM/GPRS): 850/900/1800/1900 3G (UMTS/HSDPA/HSUPA): 2100/1900/850 2G (GSM/GPRS): 850/900/1800/1900 3G (UMTS/HSDPA/HSUPA): 2100/1900/850 GPS Interface Max. Download Speed AT Command TCP/IP Protocol Yes 85.6 Kbps 85.6 Kbps Yes Yes Yes Yes
8 4
I-8212W-3GWA
9.6 ~ 115.2 Kbps
Yes
Yes
I-8213W-3GWA
Yes
9.6 ~ 115.2 Kbps
Yes
Yes
Vol. ICNP 2.0.00
8-4-1
2G/3G Products
Intelligent 2G/3G Modules Selection Guide

Model Name GT-530 GT-531 GT-534 CPU 32-bit 32-bit 32-bit Interface 2 RS-232 2 RS-232 1 RS-485 Frequency (MHz) 2G: 850/900/1800/1900 2G: 850/900/1800/1900 I/O 2 DO 10 DI 2 DO 6 DI 1 AI 2 DO 6 DI 1 AI 2 DO 6 DI 1 AI 3 DO 3 DI 8 AI Alarm Yes (SMS) Yes (SMS, Voice) Yes (SMS, Voice) Yes (GPRS) Yes (GPRS) Micro Battery SD Backup Yes Yes Yes Yes Yes Communication SMS Modbus RTU server SMS SMS GPRS Modbus RTU Client GPRS, GPS Modbus RTU Client GPRS, VxComm SMS Modbus TCP server
1 RS-232 2G: 850/900/1800/1900 1 RS-232/485 1 RS-232 1 RS-485 1 RS-232 1 RS-485 GPS 1 RS-232 1 RS-485 1 Ethernet 2G: 850/900/1800/1900
GT-540
32-bit
Yes
GT-540P GT-541 WISE-4000
32-bit 32-bit 16-bit
2G: 850/900/1800/1900 2G: 850/900/1800/1900 2G: 850/900/1800/1900
Yes -
Mini PAC with 2G/3G Selection Guide

Model Name OS CPU Flash/ RAM (KB) 512/512 Interface 1 Ethernet 2 RS-232 1 RS-485 1 Ethernet 2 RS-232 1 RS-485 1 Ethernet 2 RS-232 1 RS-485 1 Ethernet 2 RS-232 1 RS-485 1 Ethernet 2 RS-232 1 RS-485 I/O Frequency (MHz) Speed (Down/UP) 85.6/42.8 kbps 85.6/42.8 kbps 85.6/42.8 kbps 85.6/42.8 kbps LCM (Dot) GPS/ ZigBee -
G-4500-2G
MiniOS7 80 MHz
3 DO 2G (GSM/GPRS): 3 DI 850/900/1800/1900 8 AI 3 DO 2G (GSM/GPRS): 3 DI 850/900/1800/1900 8 AI 3 DO 2G (GSM/GPRS): 3 DI 850/900/1800/1900 8 AI 3 DO 2G (GSM/GPRS): 3 DI 850/900/1800/1900 8 AI 2G (GSM/GPRS): 3 DO 850/900/1800/1900 3 DI 3G (UMTS/ 8 AI HSDPA/HSUPA): 2100/1900/850 2G (GSM/GPRS): 3 DO 850/900/1800/1900 3 DI 3G (UMTS/ 8 AI HSDPA/HSUPA): 2100/1900/850 2G (GSM/GPRS): 3 DO 850/900/1800/1900 3 DI 3G (UMTS/ 8 AI HSDPA/HSUPA): 2100/1900/850 2G (GSM/GPRS): 3 DO 850/900/1800/1900 3 DI 3G (UMTS/ 8 AI HSDPA/HSUPA): 2100/1900/850
G-4500D-2G
MiniOS7 80 MHz
512/512
128 64
G-4500P-2G
MiniOS7 80 MHz
512/512
GPS
G-4500PD-2G
MiniOS7 80 MHz
512/512
128 64
GPS
G-4500-3GWA
MiniOS7 80 MHz
512/512
7.2/5.76 Mbps
8 4
G-4500D-3GWA
MiniOS7 80 MHz
512/512
1 Ethernet 2 RS-232 1 RS-485
7.2/5.76 Mbps
128 64
G-4500P-3GWA
MiniOS7 80 MHz
512/512
7.2/5.76 Mbps
GPS
G-4500PD-3GWA MiniOS7 80 MHz
512/512
7.2/5.76 Mbps
128 64
GPS
8-4-2
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
8-5 ZigBee Products

ZigBee is a specication based on the IEEE 802.15.4 standard for wireless personal area networks (WPANs). ZigBee operates in the ISM radio bands and its focus is to define a general purpose, inexpensive, self-organizing, mesh network that can be used for industrial control, embedded sensing, medical data collection, smoke and intruder warning, building automation, and home automation, etc. Advantages & Benets ISM 2.4 GHz operating frequency and fully compliant 2.4 G IEEE 802.15.4 ZigBee specications Wireless transmission range up to 100m (Line of sight) Provide friendly GUI conguration software (Windows Version) Support three different types of ZigBee devices (Coordinator, Full function device, Reduced function device) in a ZigBee network. Support three topologies (MESH, STAR, CLUSTER TREE) dened in the IEEE 802.15.4
ZB-2043-T
ZB-2060-T
ZigBee Converter Selection Guide

Model Name ZB-2550-T ZB-2550-PA ZB-2551-T ZB-2551-PA Interface 1 RS-232 1 RS-485 1 RS-232 1 RS-485 1 RS-232 1 RS-485 1 RS-232 1 RS-485 1 RS-232 1 RS-485 1 Ethernet 1 RS-232 1 RS-485 1 Ethernet 1 RS-232 1 RS-485 1 Ethernet 1 RS-232 1 RS-485 1 Ethernet Module Type Host Host Slave Slave Transmit Power 3 ~ 4 dBm 22 ~ 24 dBm 3 ~ 4 dBm 22 ~ 24 dBm Antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 5dBi Omni-Directional antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 5dBi Omni-Directional antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 5dBi Omni-Directional antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 5dBi Omni-Directional antenna Distance (LOS) 100 m 700 m (Typical) 1 km (Max.) 100 m 700 m (Typical) 1 km (Max.) 100 m
ZB-2570-T
Host
3 ~ 4 dBm
ZB-2570-PA
Host
22 ~ 24 dBm
700 m (Typical) 1 km (Max.)
ZB-2571-T
Slave
3 ~ 4 dBm
100 m
ZB-2571-PA
Slave
22 ~ 24 dBm
700 m (Typical) 1 km (Max.)
ZigBee I/O Selection Guide

Model Name ZB-2015-T ZB-2018-T ZB-2052-T ZB-2053-T ZB-2060-T Protocol DCON Modbus RTU DCON Modbus RTU DCON Modbus RTU DCON Modbus RTU DCON Modbus RTU Input Channel 6 AI 8 AI 8 DI 14 DI 6 DI Output Channel 4 Relay Out Transmit Power 4 dBm 4 dBm 4 dBm 4 dBm 4 dBm Antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 3dBi Omni-Directional antenna 2.4GHz - 3dBi Omni-Directional antenna Distance (LOS) 100 M 100 M 100 M 100 M 100 M
8 5
Vol. ICNP 2.0.00
8-5-1
GPS Products
8-6 GPS Products

GPS (Global Positioning System) is widely used for driving navigation, geographic monitoring, eet management and cargo tracking, etc. We also can use GPS for industrial application according to its longitude and latitude value and UTC time. ICP DAS provides various modules for different applications. Some are pure GPS data receivers and some add DO channels. Some even can generate a UTC synchronized 1 PPS (Pulse Per Second) output signal. You can refer the following selection guide in chapter 5 to choose the suitable GPS modules for your application. Advantages & Benets Support up to 32-channel GPS and NMEM v0183 v3.01 Apply for Automotive, Marine or Personal positioning and navigation Current time from Satellite Easy installation
I-87211W
GPS-721
GPS Selection Guide

Model Name GTM-201P-3GWA GT-321R-USB GT-321R-RS232 GPS Channels 32 12 12 32 SBAS WAAS, EGNOS, MSAS WAAS, EGNOS WAAS, EGNOS WAAS, EGNOS, MSAS WAAS, EGNOS, MSAS WAAS, EGNOS, MSAS GPS Output Interface USB/RS-232 RS-232 USB RS-232 GSM/GPRS Yes Yes (TCP/IP protocol) *Note3 Digital Output 2 Protocol/ Interface DCON/*Note1 Description GPs Receiver GPS Receiver GPS Receiver GPS Receiver and 2 DO Module GPS Receiver and GPRS Controller Module GPS Receiver and 1 DO Module
I-87211W
I-8213W
32
*Note2
GPS-721
32
RS-232
DCON/RS-485
8 6
[*Note1] The support list of MCU (Main Control Unit) and I/O expansion unit are: XPAC, WinPAC, LinPAC, iPAC, ViewPAC, U-87P1/2/4/8, USB-87P1/2/4/8, I-8000, TI-8KE4/8, I-8KE4/8-MTCP, I-87K4/5/8/9 [*Note2] Gets GPS Information from Parallel bus (API). The support list of MCU: XPAC, WinPAC, LinPAC, iPAC, ViewPAC, etc. [*Note3] Gets GSM/GPRS Information from Parallel bus (API). This GPRS/GSM module is integrated with the TCP/IP protocol, Extended TCP/IP AT commands. The support list of MCU : XPAC, WinPAC, LinPAC, iPAC, ViewPAC, etc.
8-6-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
8-7 Infrared Products

IR data transmission is employed in short-range communication among computer peripherals and personal digital assistants. These devices usually conform to standards published by IrDA. ICP DAS has developed various IR products to apply in home automation. Theses IR products will help users to control and integrate these IR devices into a control system. Therefore, by integrating the PAC and others series of ICP DAS, users can easily to establish the home automation system. Advantages & Benets With RS-232 and RS-485 Interfaces Support Modbus/RTU protocol No special or proprietary hardware is required Easy to integrated with automation High noise immunity
IR-210
Infrared Selection Guide

Model Name IR-712 IR-210 IR-310-RM Output 2 x IR Output channels 6 x IR Output Channels 10 x High Power Relay Channels UART Interface 1 x RS-232 1 x RS-485 1 x RS-232 1 x RS-485 1 x RS-232 1 x RS-485 Protocol Support Modbus RTU Modbus RTU Modbus RTU IR commands
8 7
Vol. ICNP 2.0.00
8-7-1
Wireless Applications
8-8 Wireless Applications

PAC/PLC Remote Maintenance by 2G/3G Wireless Communication
These 2G/3G products are specially designed by ICP DAS for the PLC/PAC remote maintenance and upgrading the serial to network application solution. It is suitable for the harsh industrial eld. This solution can transfer the site condition of equipment accurately. The maintenance engineer can directly check and diagnose the device/PLC like on-site. This can reduce the huge maintenance cost to increase the competition of enterprises. These PLC can be Siemens, Mitsubishi or Omron with RS485/ RS232 communication port.
8 8
Model Name CPU Interface 1 RS-232 1 RS-485 or RS-232 COM1 (5-wire RS-232) COM2 (RS-485) COM3 (3-wire RS-232) Frequency Quad-band 850/900/1800/1900 MHz GSM supporting GPRS Tri-band 2100/1900/850 MHz WCDMA supporting I/O Transparent Communication GPRS GT-541 32-bit 3 channel DI 3 channel DO 8 channel AI
G-4500L
32-bit (Linux)
UMTS/HSDPA/ HSUPA
8-8-1
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Serial to Wireless Solution
Setting up a xed-line network on site is relatively complicated, makes the agricultural production technology underdeveloped, and left behind the state of the art in factories of manufactured products. The application shown above is a project aiming to improve the production process in sh farms using new perception, control and automation technologies. Simply converting serial signal to wireless allows sher to monitor or control sh farm easily. It is easy to convert serial RS-232/485 to a wireless product by wireless modems or with converters instead of running a wire. All of the following products allow you to convert a serial port to a wireless serial connection.
Model Name Serial to WLAN M2M-711D Serial to DSSS RF SST-900B SST-2450 Serial to ZigBee ZB-2550-T ZB-2550-PA ZB-2551-T ZB-2551-PA
Interface
Wireless
RS-232 RS-485
Wi-Fi (802.11b/g)
8 8
RS-232 RS-485 RS-232 RS-485
DSSS RF (900 MHz) DSSS RF (2.4 GHz)
RS-232 RS-485 RS-232 RS-485
ZigBee Host (2.4 GHz) ZigBee Slave (2.4 GHz)
Vol. ICNP 2.0.00
8-8-2
Wireless Applications
CAN bus Wireless Solution
Controller Area Network (CAN) is a message-based protocol, designed specically for automotive applications but now also used in other areas such as industrial automation and medical equipment. ICP DAS provides CAN to Wi-Fi product to support the wireless transmission of CAN data between various CAN networks or a CAN network and a WLAN network according to the 802.11b/g standard. Model Name CAN to WLAN I-7540D-WF CAN/RS-232 Wi-Fi (802.11b/g) Interface Wireless
Ethernet to Wireless Solution

Ethernet is a family of computer networking technologies for local area networks (LANs) commercially introduced in 1980 and has become the public wired network in commerce or industry eld. It has great benets and extends the Ethernet application if wireless technology can be applied in Ethernet application. According to this issue, we develop Ethernet/WiFi and Ethernet/ ZigBee for users to apply in their Ethernet application.
8 8
Model Name Ethernet to WLAN T-316 Ethernet to ZigBee ZB-2570-T ZB-2570-PA ZB-2571-T ZB-2571-PA Ethernet Ethernet ZigBee Host (2.4 GHz) ZigBee Slave (2.4 GHz) Ethernet Wi-Fi (802.11b/g) Interface Wireless
8-8-3
ICP DAS CO., LTD.
Vol. ICNP 2.0.00
Model Name C
CA-0903 CA-090910 CA-0910 CA-0910-C CA-0910F CA-0915 CA-4002 CA-9-2505D CA-9-3705 CA-9-3715D CA-PC09F CA-USB18 CNT-CAN CNT-PROFI
Page
7-1-1 7-1-1 7-1-1 5-2-13 7-1-1 7-1-1 7-3-1 7-1-2 7-1-2 7-1-2 7-3-1 7-1-2 5-2-13 5-6-4 I-2532 I-2533 I-2534 I-2541
Model Name I
Page
5-2-4 5-2-4 5-2-5 4-7-1 4-7-1 5-2-8 5-3-3 5-3-3 5-4-4 5-4-4 4-2-3 4-3-1 4-4-7 4-4-3 4-5-1 5-2-6 5-2-6 5-2-6 5-2-6 5-2-5 5-2-5 5-2-6 5-2-7 5-2-7 5-6-3 4-4-9 4-6-3 4-6-7 4-6-9 5-2-7 5-3-4 5-4-4 5-2-7 5-2-7 5-7-3 5-7-3 3-5-6 3-5-8 3-5-8 5-2-8 5-3-4 5-4-4 3-5-10 3-5-10 8-4-1 8-4-1 5-2-8 5-3-4 5-4-4 8-6-1 5-7-2
I-2542 series I-7188XBD-CAN I-7231D I-7232D I-7241D I-7242D I-7510 series I-7514U I-7520 series I-7520U4 I-752N series I-7530 I-7530A I-7530A-MR I-7530-FT I-7531 I-7532 I-7540D I-7540D-MTCP I-7540D-WF I-7550 I-7551 I-7560 I-7561 I-7563 I-7565 I-7565-CPM I-7565-DNM I-7565-H1 I-7565-H2 I-7567 I-7570 I-8112iW I-8114W I-8114iW I-8120W I-8123W I-8124W I-8142iW I-8144iW I-8212W I-8213W I-87120 I-87123 I-87124 I-87211W I-87H17W
D
DIN-KA52F DIN-KA52F-48 DN-09-2 DN-09-2F DR-120-24 DR-120-48 DS-712 DS-715 7-2-1 7-2-1 7-3-1 7-3-1 7-3-1 7-3-1 3-3-1 3-3-3
G
G-4500 series G-4500L GPSU06U-6 GPSU06E-6 GPS-721 GT-321R-USB GT-321R-RS232 GT-530 GT-531 GT-534 GT-540(P) GT-541 GTM-201 series GTM-201(P)-3GWA GW-5492 GW-5493 GW-7228 GW-7238D GW-7243D GW-7433D GW-7434D GW-7472 GW-7552 GW-7553 GW-7557 8-4-2 8-8-1 7-2-1 7-2-1 8-6-1 8-6-1 8-6-1 8-4-2 8-4-2 8-4-2 8-4-2 8-4-2 8-4-1 8-4-1 5-9-2 5-9-3 5-5-2 5-5-2 5-4-3 5-3-3 5-4-3 5-8-3 5-6-4 5-6-4 5-6-4
H
HART-710 5-7-2
Model Name I
I-87H24W IR-210 IR-310-RM IR-712
Page
5-7-2 8-7-1 8-7-1 8-7-1
Model Name P
PM-2133-CAN series PM-2134-CAN series PPDS(M)-700-MTCP series PPDS-700-IP67 series PPDS-712-MTCP PPDS-715-MTCP PROFI-2510 PROFI-2541
Page
5-2-10 5-2-10 3-2-1 3-4-1 3-3-1 3-3-3 5-6-2 5-6-3
K
KA-52F KA-52F-48 7-2-1 7-2-1
M
M2M-711D MDR series MSM-508 MSM-508F series MSM-6226 MSM-6226G 8-8-2 7-2-1 6-2-3 6-2-4 5-8-3, 6-2-4 6-2-4
R
RS(M)-405 series RS(M)-405F series RS(M)-408 series 6-2-3 6-2-3 6-2-3
S
SST-2450 SG-770 SST-900B 8-3-1 5-2-6 8-3-1
N
NS-200AF series NS-200SX/NS-200LX NS-200WDM series NS-205(A) NS(M)-205AF series NS-205G NS-205-IP67 NS(M)-205PF series NS-205PSE(-24V) NS(M)-206AF series NS(M)-208A NS(M)-208AG NS(M)-208G NS(M)-208PSE NS(M)-208PSE-4 NS(M)-209F series 6-2-4 6-2-4 6-2-4 6-2-1 6-2-1 6-2-1 6-2-2 6-2-2 6-2-2 6-2-2 6-2-1 6-2-1 6-2-1 6-2-3 6-2-2 6-2-2
T
T-316 tDS-700 series tM-7510U tM-7520U tM-752N series tM-7561 tGW-700 series 8-2-1 3-7-1 4-2-1 4-4-1 4-5-5 4-6-5 3-7-4
U
USB-2512 USB-2514 USB-2560 USB-4518 uPAC-7186EXD-CAN PAC-7186EX(D)-MTCP 4-6-1 4-6-1 7-4-1 4-6-1 5-2-8 3-9-1
P
PCISA-7520AR PCISA-7520R PCM-CAN100 PCM-CAN200 PCM-CAN200P PCM-CM100 PDS-220Fx series PDS-5105D-MTCP PDS(M)-700 series PDS-811 PDS-821 PDS-842 PDS-882 PEX-CAN200i series PISO-CAN100U series PISO-CAN200U series PISO-CAN400U series PISO-CAN800U series PISO-CM100U series PISO-CPM100U series PISO-CPS100U series PISO-DNM100U series PISO-DNS100U series 4-4-5 4-4-5 5-2-9 5-2-9 5-2-9 5-2-9 3-6-1 3-8-1 3-2-1 3-5-2 3-5-2 3-5-4 3-5-4 5-2-9 5-2-10 5-2-10 5-2-10 5-2-10 5-2-10 5-3-4 5-3-4 5-4-5 5-4-5 ZB-2000 series WISE-4000(D) VEX-112 series VEX-114 series VEX-118 series VEX-142 series VEX-144 series VEX-148-5w series VXC-112 series VXC-114 series VXC-118U series VXC-142 series VXC-144 series VXC-148U-5w series VXC-164AU series VXC-182iU
V
2-2-1 2-2-2 2-2-7 2-2-3 2-2-4 2-2-8 2-2-1 2-2-2 2-2-7 2-2-3 2-2-4 2-2-7 2-2-6 2-2-5
W
8-4-2
Z
8-5-1
Compact PAC Products Catalog

XP-8000-Atom Series XP-8000 Series WP-8000 Series LP-8000 Series iP-8000 Series ViewPAC Series MotionPAC Series I/O Expansion Units I/O Modules 7188/7186 Series 5000 Series

Industrial Remote I/O Products Catalog

RS-485 Remote I/O Modules Ethernet Remote I/O Modules FRnet I/O Modules CAN bus Remote I/O Modules PROFIBUS Remote I/O Modules

Touch HMI Devices Brochure

2.8'' high-color LCD touch screen 3.5'' high-color LCD touch screen 4.3'' high-color LCD touch screen RS-232, RS-485 or Ethernet Interface HMIWorks development software Modbus TCP, Modbus RTU and DCON protocols Standard C or Ladder programming

Industrial Data Acquisition for ISA and PCI Bus Full Catalog
Multi-port Serial Communication Boards CAN bus Communication Boards PCI/ISA Data Acquisition and I/O Boards PCI bus Battery-Backup Memory Boards Daughter Boards & Accessories Motion Control & Watchdog Boards Signal Conditioning & Power Modules FRnet Remote I/O Products

LED Display
High Reliability Industrial Ethernet Switch Catalog

Managed Ethernet Switches Unmanaged Ethernet Switches PoE Ethernet Switches Media Converters Real-time Redundant Ring Ethernet Switches IP67 Waterproof Switches Cyber-Ring Ethernet Self-healing Technology
New Members in I/O Cards Short Form

PCI Express Cards Universal PCI Cards Analog Input and Output Cards Digital Input and Output Cards Multi-port Serial Cards

Fieldbus Solutions Full Catalog

CAN Bus Communication Products CANopen Communication Products DeviceNet Communication Products J1939 Communication Products PROFIBUS Communication Products HART Communication Products Ethernet/IP Communication Products BACnet Communication Products
Industrial Wireless Communication Products

Industrial Wireless Series DSSS RF Modems 2G/3G Mini-PAC/Modules/Modems ZigBee Converters & I/O Modules

GPS Solutions
Industrial CAN bus Products Catalog

CAN Converters, CAN Repeater, CAN Bridge, CAN Switch, CAN Cards, Surge Protector, PACs, CAN Expansion Modules, CAN Power Meters, CAN Connector, CAN Transformation Cable CANopen Gateways, CANopen Master Interfaces, CANopen Remote I/O Modules DeviceNet Gateways, DeviceNet Master Interfaces, DeviceNet Remote I/O Modules J1939 Gateways
M2M Total Solutions

2G/3G Solutions WLAN Solutions Remote Maintenance Solutions DSSS RF/GPS Solutions M2M Series Selection Guide

ICNP Catalog All-20120321

Uploaded by

Copyright:

Available Formats

ICNP Catalog All-20120321

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ICNP Catalog All-20120321

Uploaded by

Copyright:

Available Formats

Table of Contents

Multi-port Serial Cards

Serial Device Server

Converters, Repeaters, Hubs and Splitter

Wireless Networking Solutions

1-1 Industrial Communication & Networking Products

1-1 Industrial Communication & Networking Products

Multi-port RS-232/422/485 Communication Cards

PAC Fam ily

Vol. ICNP 2.0.00

Industrial Communication & Networking Products Catalog

Programmable Serial to Ethernet Device Server

Repeater, Converter, Splitter and Hub

USB to RS-232/422/485/CAN Bus Converters

Vol. ICNP 2.0.00

Fieldbus in Industrial Automation

ICP DAS CO., LTD.

Vol. ICNP 2.0.00

Multi-port Serial Cards

Industrial Communication & Networking Products

Easy COM Port Selection by DIP switch

ICP DAS CO., LTD.

Vol. ICNP 2.0.00

Industrial Communication & Networking Products Catalog

DB-37 to 4-port DB-9 Cable

Software gets data in dynamic timing.

Hardware puts data in xed speed.

Vol. ICNP 2.0.00

Wiring Note for RS-232 and RS-422/485 Devices

Device RxD TxD GND RTS CTS DTR DSR FGND

Device TxD RxD GND CTS RTS DSR DTR FGND

3-wire RS-232 Connection (Shorts unused signals RTS/CTS, DTR/DSR)

2-wire RS-485 Wiring

RS-485 Master DATA+(B) DATA-(A) GND FGND

RS-422 Device RxD+(B) RxD-(A) TxD+(B) TxD-(A) GND FGND

2-wire Only Device

Twisted Pair Wiring plus Ground

ICP DAS CO., LTD.

Vol. ICNP 2.0.00

Industrial Communication & Networking Products Catalog

2-2-2 2-2-2 2-2-4 2-2-4 2-2-6 2-2-7 Call 2-2-8 Call

Vol. ICNP 2.0.00

Serial Communication Cards

2-2 Serial Communication Cards

Serial Communication Card with 2 RS-232 ports

Male DB-9 Connector

ICP DAS CO., LTD.

Vol. ICNP 2.0.00

Industrial Communication & Networking Products Catalog

Serial Communication Card with 4 RS-232 ports

RS-232 Female DB-37 to Male DB-9 Connector

Vol. ICNP 2.0.00

Serial Communication Cards

Serial Communication Card with 2 RS-422/485 ports

RS-422/485 Male DB-9 Connector

ICP DAS CO., LTD.

Vol. ICNP 2.0.00

Industrial Communication & Networking Products Catalog

Serial Communication Card with 4 RS-422/485 ports

CTS4-(A) RxD4-(A) RTS4-(A) RTS4+(B) RxD4+(B)