SM-14

HYDRAULIC DRILLING RIG

SM-14
MAIN FEATURES STD VERSION
1 - Crawler undercarriage with +/- 10 oscillating tracks 2 - Machine body including prime mover, hydraulic plant with load sensing control and soundproof canopy 3 - N 2 hydraulic outriggers 4 - Control levers for rig positioning 5 - Articulated boom for mast positionning 6 - 4 x 90 sector turntable for mast rotation 7 - 1000 mm stroke cylinder for mast shoring 8 - Rotary cradle with adjusting rollers and 450 mm side-shifting device 9 - Variable speed rotary head with 1207 daNm max torque, 221 rpm max rotation 10 - Floating system 11 - Clamp max. diam. 315 mm 12 - Breaker max. diam. 315 mm 13 - Control board on rotating and pivoting arm for drilling and service functions 14 - Service winch with jib 15 - Chain for hydraulic hoses

SM-14
HYDRAULIC DRILLING RIG A new model
Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of: Micropiles, Tie-backs, Jet-Grouting, Coring, Drain, Water wells. The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth. Featured with Load Sensing System, it has lower running costs and a reduced wear and tear on components. Soilmec SM-14 versatility unit that can be tailored to any customer need or geological conditions: - Variable speed or 3-speeds gear box rotary head; - Hydraulic top hammer; - Vibrorotary; - Double Head. Soilmec SM-14 may be further tailored with a wide range of OPTIONAL items such as: - Jet-Grouting kit for mono, bi or three fluids treatment and steeples lifting speed for 127 mm rods; - Kinematism: New 90 mast articulation for tie-back and anchoring drilling (twin cylinders) Mast rotation by motoreducer for + _ 180 - Service crane for handling of drilling rods and for rods & casing; - Designed for working with carousel; - Foam Pump; - Dust collector; - Radio operated remote control; - Rod carousel 6x114 and 10x114; - Handy service crane.
BASE MACHINE Undercarriage with oscillating tracks Track shoe width Overall length Overall width Travelling speed Average ground pressure Traction force Max climbing capacity Diesel engine Make and model Max diesel engine power (SAE J1995) Fuel tank capacity Electric motor (on request) Make and model Rated power Hydraulic system Oil tank capacity Mast hoist & feed system Feed Type Feed stroke Maximum hoist pull Maximum feed force Maximum speed (fast operation) Clamp & hydraulic joint breaker Nominal size Maximum clamping force (28 MPa) Maximum breaking torque Winch and jib Maximum line pull (1st layer) Maximum rope speed (4st or 5st layer) Rope diameter Rope capacity / Rope fitted JET GROUTING VERSION Rod diameters Max treatment depth (T1/T1S-T2) Std. kinematic articulation 4x90 sector turntable Std. Weight (w/o options) Noise level mm mm kg LwA - dB 90 - 114 15400 / 16000 13400 105 mm mm mm km/h MPa kN % 400 3062 2300 2,7 0,07 123 70 CUMMINS QSB 4.5 - Tier III 123 (165) @ 2000 rpm 200 SIEMENS 4 POLS 50 Hz 90 (121) @ 1485 rpm 400
Standard Optional

kW (BHp) liter

kW (BHp) liter

Travelling Remote Board

mm kN kN rpm mm kN daNm kN m/min mm m

Cylinder 4000 89 45 28
Standard

Gear motor 7000 87 87 28

Radio Remote Control

50 - 315 266 5060

50 - 360 266 5060 20 60 10 46 / 40

60 - 415 266 5060

ROTARY HEAD MODELS Variable speed rotary head (RH 1200V). Any combination of torque and speed can be set from operators console to get the most suited ratio for your drilling technology. Standard rotary available also with 127 mm passage may be easily modified on site, by fitting purposely-designed kits, to get either higher torque or higher speed versions. Rotary head for soil investigation (S 900G) with 832 rpm may suitable for diamond coring. Rotary head with gear box (RH 1300G). Rollstar type. Rotary head HH type for special application (HH 2500G) , such as CFA application or auger drilling. Vibrorotary. Is made up by combining one conventional rotary to a Vibro Hammer unit.
Advantages: - Single or double drilling string; - Lower skin friction of casing/rod (therefore less torque is needed); - Higher efficiency compared to TH technology; - Lower noise emission compared to DTH and TH technologies; - Lower extraction force required (Vibro can be operate drilling pull-up stroke).

Single rotary

Top Hammer. The rig design allows the assembling of any available top hammer brand with a maximum frequency of 2400 blow/minute and a maximum energy of 840 Nm. Double rotary head. Hydraulic system is sized to feed any options such as Rotary/Rotary, Rotary/Top Hammer without compromising in power.
ROTARY HEAD RH 1200 V (Standard) Gear box type Max nominal torque Max drilling speed Inner passage ROTARY HEAD S 900 G Gear box type Max nominal torque Max drilling speed Inner passage ROTARY HEAD RH 1300 G Gear box type Max nominal torque Max drilling speed Inner passage ROTARY HEAD HH 2500 G Gear box type Max nominal torque Max drilling speed Inner passage TOP HAMMER Weight up to Blow frequency / impact energy Max nominal torque

daNm rpm mm

variable 1207 0-221 114 Rollstars 6 ratio gearbox 916 0-832 76 Rollstars 3 ratio gearbox 1290 0-429 114 3 ratio gearbox 2547 0-52 4 700 2400 / 840 shank up to C112 1800
Upper Rotary for roads Lower Rotary RH 1200 V

daNm rpm mm

Vibrorotary

daNm rpm mm

daNm rpm inches kg 1/min / Nm daNm

Top Hammer

DOUBLE ROTARY HEAD DR-14 Gear box type Max nominal torque Max drilling speed
VIBRO ROTARY VD 108
Drilling performance Hydr. exciter block - Rod Diameter range - Frequency
- Centrifugal force - Hydr. power - Max amplitude - Hydr. power - Ranging torque - Max speed

daNm rpm
mm Hz (rpm) kN kW mm kW daNm rpm mm Hz (rpm) kN kW mm kW daNm rpm

variable 828 323

variable 1207 221

Hydr. rotary head

57 (3400) 90 47.6 9.3

38.5 780 - 390 80 76 - 224

VIBRO ROTARY VD 212

Hydr. rotary head

Double rotary

70 1270-302 221

SM-14
MICROPILES VERSION

STANDARD VERSION Stroke 4000 mm cylinder

OPTIONAL VERSION Stroke 7000 mm gear motor

Stroke 4000

10521

9853

350

500
6117

-500
6713

650

3537

1739

729

352

864

375 1076 3061 2137

178

1076

3061

375

2136

9915
10519

2176

355

1735

2137

3061

2137

2137

3061

2136

1931

MAST MOVEMENTS - Standard articulations

16

1516

2089

20

10

2716 10

15

SM-14
JET GROUTING VERSION

SM-14

OPTIONAL VERSION

90 MAST ARTICULATION (twin cylinders)

20

Stroke 15403 T2

Stroke 16000 T1

Stroke 4000

(114) Max.

2010 500 500 879 3061 2136

1076

3061

2137

21

20

R3334

40
40
R11 75
1138 71
21

20

30

Vibrorotary Micropile

Jet grouting

Tie-backs

Pre-bored

Optionals

Flushing pump

Rod Carousel

Lifting crane

90 mast articulation

SOILMEC LTD - Peterborough - U.K. SOILMEC MISR S.A.E. Co. - Il Cairo - Egypt SOILMEC (H.K.) Limited - Hong Kong SOILMEC JAPAN CO LTD - Tokio - Japan SOILMEC S.P.A. - Beijing Repr. Office - P.R. China SOILMEC FAR EAST PTE.LTD - Singapore SOILMEC ARABIA LLC - Jeddah - Saudi Arabia SOILMEC EMIRATES - Dubai - U.A.E. SOILMEC GULF - Dubai - U.A.E. SOILMEC FRANCE S.A.S. - Paris - France SOILMEC INDIA - Mumbai - India SOILMEC S.P.A. - Moscow Repr. Office - Russia SOILMEC DEUTSCHLAND GmbH - Drolshagen - Deutschland SOILMEC NORTH AMERICA - Boston - USA SOILMEC AUSTRALIA - Sydney - Australia

CERTIFIED QUALITY SYSTEM

SOILMEC S.p.A. Drilling and Foundation Equipment 5819, via Dismano 47023 Cesena (FC) - Italy tel. +39-0547-319111 fax +39-0547-318548 http:// www.soilmec.it e-mail: soilmec@soilmec.it

All technical data are purely indicative and subject to change without notice

07/2008-1000 -D/F-Cils-Il Digitale

SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and representative offices as: