Dome Mounts

American Dynamics family of programmable domes is complimented by a comprehensive line of mounts to accommodate any indoor or outdoor mounting requirement. These mounts are compatible with the SpeedDome Ultra Series, and the SpeedDome Optima Series of programmable domes. Choose from a variety of wall mounts, corner mounts, pole mounts, ceiling mounts, pendant mounts and over-the-roof mounts for both indoor and outdoor applications. Depending upon the requirements of the application,

FEATURES
line of indoor Complete and outdoor mounts to suit any mounting requirement with Compatible SpeedDome Ultra, SpeedDome Ultra Drone, and SpeedDome Optima Series of programmable domes aesthetic Lightweight, design IP66/NEMA 4 Meets (outdoor mounts) and IP40 (indoor mounts) standards

indoor mounts can be used with or without an

Tamper-resistant Corrosion-resistant, waterproof design

optional bubble. The mounts innovative end cap and pendant cap design enable the mount and housing to be assembled on the ground, allowing for a safe, quick and efficient installation.

www.americandynamics.net

Indoor Mounting Options

Description
This Top Hat housing with trim ring and plastic base mounts directly to a ceiling or to an indoor mounting structure. It is a metal enclosure that houses the dome. The trim ring is slightly larger so that it completely covers the Top Hats metal rim. The RHIUTH is plenum rated.

*Dome Compatibility
SpeedDome Ultra Series SpeedDome Optima

Weight
.77 kg (1.7 lbs)

Dimensions (HxWxD)
157 x 175 x 175 mm (6 x 7 x 7 in)

Construction Safety
Galvanized steel

RHIUIBM
I-Beam Mount Assembly

This assembly enables the dome to suspend from an I-beam; it includes the clamp, pipe tee, nipple, and flange. The clamp attaches to a 1.25 pipe, provided by the customer, then affixes to the pendant hardware. The Top Hat housing/dome assembly also mounts to the structure.

SpeedDome Ultra Series SpeedDome Optima

2.9 kg (6.4 lbs)

6 m (max.) x 293 x 127 mm (20 ft (max.) x 12 x 5 in)

Steel and galvanized steel

RHIUIB
I-Beam Clamp

This clamp enables the dome to suspend from an I-beam. The I-beam clamp is installed in combination with the RHOPN Ceiling Pendant Mount to affix the Top Hat housing/dome assembly in I-beam installations. This clamp is also included with each RHIUIBM.

SpeedDome Ultra Series SpeedDome Optima

1.5 kg (3.3 lbs)

6.7 x 293 x 127 mm (.29 x 12 x 5 in)

Steel

RHIUHC
Hard Ceiling Bracket

This bracket enables the Top Hat housing to be recessed in the ceiling (requires RHIUTH Top Hat). The bracket is mounted to the Top Hat and installed in a hole cut in the ceiling - perfect for sheet rock, plaster or solid ceilings. The hard ceiling bracket can be installed entirely from below the ceiling; the installer will not have to access the area above the ceiling to install it.

SpeedDome Ultra Series SpeedDome Optima

.70 kg (1.6 lbs)

212 x 179 x 56 mm (8 x 7 x 2 in)

Galvanized steel

RHIUFB
Fixed Bracket

This bracket enables the Top Hat housing to be recessed in the ceiling or in a 2-foot drop ceiling tile (requires RHIUTH Top Hat). The bracket is mounted to the Top Hat housing and installed in a hole cut in the ceiling. The bracket distributes the weight of the dome and Top Hat housing across the T-bar framework of the ceiling. It is also very useful for sheet rock, plaster, or solid ceilings. This bracket enables the Top Hat housing to be recessed in drop ceiling that utilize other than 2-foot grids (requires RHIUTH Top Hat). The bracket distributes the weight of the dome and the Top Hat housing across the T-bar framework of the ceiling, and is adjustable from 632-1219 mm (24-48 in). This mount enables the Top Hat housing to be recessed in a 2 x 2 drop tile ceiling. The ceiling tile is removed and the white tile mount is simply dropped in its place. A Top Hat housing and plastic base are included in the kit.

SpeedDome Ultra Series SpeedDome Optima

1.8 kg (4.0 lbs)

180 x 632 x 100 mm (7 x 24 x 4 in)

Galvanized steel

RHIUAB
Adjustable Bracket

SpeedDome Ultra Series SpeedDome Optima

2.3 kg (5.0 lbs)

180 x 1219 x 100 mm (7 x 48 x 4 in)

Galvanized steel

RHIU2X2M
2 x 2 Tile Mount

SpeedDome Ultra Series SpeedDome Optima

2.7 kg (6.0 lbs)

190 x 607 x 607 mm (7 x 24 x 24 in)

Aluminum, cold rolled steel, ABS plastic

RHIU2X2P
2 x 2 Tile Pendant Mount

This mount enables the pendant mount to be installed in a 2 x 2 drop tile ceiling. The Top Hat housing/dome assembly also mounts to the structure. The mounting kit includes a 2x2 plate and pendant hardware. The plate attaches to a 1.25 pipe, provided by the customer, then affixes to the Top Hat housing/dome assembly. If mounting a SpeedDome Optima with this model, a RHOPN ceiling pendant mount kit is required. This mount enables the dome to be recessed in a 2 x 2 drop tile ceiling. The ceiling tile is removed and the tile mount is simply dropped in its place.

SpeedDome Ultra Series SpeedDome Optima

5.4 kg (12.0 lbs)

47 x 605 x 605 mm (2 x 23 x 23 in)

Aluminum, cold rolled steel, ABS plastic

RH2X2
2 x 2 Tile Mount Plate

SpeedDome Ultra Series SpeedDome Optima

1.7 kg (3.8 lbs)

47 x 605 x 605 mm (2 x 23 x 23 in)

Painted aluminum

RHOPN
Indoor Pendant Mount

This mount allows an outdoor dome housing to be suspended from an outdoor ceiling or horizontal surface. It can be installed using either 1.25'' NPT threaded pipe or rigid conduit, either new or existing, up to 3 meters (10 feet) in length.

SpeedDome Ultra Series SpeedDome Optima

1.8 kg (4.0 lbs)

115 x 120 x 120 mm (4.5 x 5 x 5 in)

Powder coated aluminum and ABS plastic

Indoor Mounting Options

Description
This mounting plate enables the dome to mount to a standard 3.5 x 3.5 duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure.

*Dome Compatibility
SpeedDome Ultra Series SpeedDome Optima

Weight
.09 kg (.2 lbs)

Dimensions (HxWxD)
2 x 90 x 90 mm (.08 x 3 x 3 in)

Construction Safety
Galvanized steel

RHIU4X4
4 x 4 Mounting Plate

This mounting plate enables the dome to mount to a standard 4 x 4 duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure.

SpeedDome Ultra Series SpeedDome Optima

.14 kg (.3 lbs)

2 x 105 x 105 mm (.08 x 4 x 4 in)

Galvanized steel

RHIUCM
Wall/Corner Mount

This mounting structure attaches directly to a flat wall, inside corner, or outside corner. The Top Hat housing/ dome assembly mounts to the structure for a quick and easy installation.

SpeedDome Ultra Series SpeedDome Optima

1.8 kg (4.0 lbs)

With dome installed 224 x 101 x 201 mm (9 x 4 x 8 in)

Galvanized steel

RHIULWM
Long .6 m (24 in) Wall/Corner Mount

This mount positions the dome away from the wall, enabling it to see over furniture, shelving, and displays. The mounting structure attaches directly to a flat wall, inside corner, or outside corner. The Top Hat housing/dome assembly also mounts to this structure.

SpeedDome Ultra Series SpeedDome Optima

2.7 kg (6.0 lbs)

With dome installed 413 x 123 x 772 mm (17 x 5 x 31 in)

Painted steel

RHOSW
Short Wall Mount with End Cap Assembly

This mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter, this short wall mount can be affixed to corners as well as poles. This mounts compact design with mounting cover hides the mounting plate to provide a clean and aesthetically pleasing appearance.

SpeedDome Ultra Series SpeedDome Optima

1.3 kg (3.0 lbs)

With dome installed 366 x 218 x 282 mm (14 x 9 x 22 in)

Powder coated aluminum, ABS plastic, and fiber filled PVC

RHOLW
Long Wall Mount with End Cap Assembly

This mount positions the dome away from the wall, enabling it to see over furniture, shelving, and displays. This mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter, this long wall mount can be affixed to corners as well as poles. This mounts compact design with mounting cover hides the mounting plate to provide a clean and aesthetically pleasing appearance.

SpeedDome Ultra Series SpeedDome Optima

1.7 kg (3.9 lbs)

With dome installed 366 x 218 x 587 mm (14 x 9 x 23 in)

Powder coated aluminum, ABS plastic, and fiber filled PVC

RHOWCA
Corner Bracket Adapter

This adapter bracket enables the long and short wall mounts (RHOSW and RHOLW) to affix to outside corners. Its powder coated aluminum construction ensures an extremely sturdy installation.

SpeedDome Ultra Series SpeedDome Optima

.79 kg (1.75 lbs)

185 x 210 x 125 mm (7 x 8 x 5 in)

Powder coated aluminum

RHOWPA
Pole Strap Adapter

This adapter bracket enables the long and short wall mounts (RHOSW and RHOLW) to affix to outside corners. This option contains stainless steel straps that can be daisy chained to accommodate any size pole. The kit also includes all the necessary mounting hardware. Its powder coated aluminum construction ensures an extremely sturdy installation.

SpeedDome Ultra Series SpeedDome Optima

.5 kg (1.1 lbs)

138 x 79 x 27 mm (5 x 3 x 1 in) Straps support 53 to 951 mm (2 to 38 in) pole diameter

Powder coated aluminum and stainless steel

RHSDA
Ceiling Pendant Mount

This adapter allows a SpeedDome Ultra to be retrofitted into an existing SpeedDome housing via the housing's snap-hinge mounts, making installation fast and easy. A shirt assembly is included with this SpeedDome Housing adapter kit to compensate for the smaller dimensions of the SpeedDome Ultra.

SpeedDome Ultra Series SpeedDome Optima

1.4 kg (3.0 lbs)

106 x 205 x 250 mm (4 x 8 x 10 in)

Anodized aluminum

AMERICAN DYNAMICS DOME MOUNTS

Outdoor Mounting Options

Description
This mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter, this short wall mount can be affixed to corners as well as poles. This mounts compact design with mounting cover hides the mounting plate to provide a clean and aesthetically pleasing appearance.

*Dome Compatibility
SpeedDome Ultra Series SpeedDome Optima

Weight
1.3 kg (3 lbs)

Dimensions (HxWxD)
With dome installed 366 x 218 x 282 mm (14 x 9 x 11 in)

Construction Safety
Powder coated aluminum, ABS plastic, and fiber filled PVC

RHOLW
Long Wall Mount with End Cap Assembly

This mount positions the dome away from the wall, enabling it to see over awnings, soffits and landscaping. This mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter, this long wall mount can be affixed to corners as well as poles. This mounts compact design with mounting cover hides the mounting plate to provide a clean and aesthetically pleasing appearance.

SpeedDome Ultra Series SpeedDome Optima

1.7 kg (3.9 lbs)

With dome installed 366 x 218 x 587 mm (14 x 9 x 23 in)

Powder coated aluminum, ABS plastic, and fiber filled PVC

RHOWCA
Corner Bracket Adapter

This adapter bracket enables the long and short wall mounts (RHOSW and RHOLW) to affix to outside corners. Its powder coated aluminum construction ensures an extremely sturdy installation.

SpeedDome Ultra Series SpeedDome Optima

.79 kg (1.75 lbs)

185 x 210 x 125 mm (7 x 8 x 5 in)

Powder coated aluminum

RHOWPA
Pole Strap Adapter

This adapter bracket enables the long and short wall mounts (RHOSW and RHOLW) to affix to outside corners. This option contains stainless steel straps that can be daisy chained to accommodate any size pole. The kit also includes all the necessary mounting hardware. Its powder coated aluminum construction ensures an extremely sturdy installation.

SpeedDome Ultra Series SpeedDome Optima

.5 kg (1.1 lbs)

138 x 79 x 27 mm (5 x 3 x 1 in) Straps support 53 to 951 mm (2 to 38 in) pole diameter

Powder coated aluminum and stainless steel

RHOPN
Outdoor Pendant Mount

This mount allows an outdoor dome housing to be suspended from an outdoor ceiling or horizontal surface. It can be installed using either 1.25'' NPT threaded pipe or rigid conduit, either new or existing, up to 3 meters (10 feet) in length.

SpeedDome Ultra Series SpeedDome Optima

1.8 kg (4.0 lbs)

115 x 120 x 120 mm (4.5 x 5 x 5 in)

Powder coated aluminum and ABS plastic

RHOTR
Over-The-Roof Mount with End Cap Assembly

This mount affixes directly to any vertical roof wall or parapet. This mount positions the dome away from the wall, enabling it to see over awnings, soffits and landscaping. Its opposing wing brackets ensure a secure installation to the roof surface, while allowing the pole to be repositioned for easy service access.

SpeedDome Ultra Series SpeedDome Optima

5.7 kg (12.7 lbs)

1098 x 243 x 473 mm (43 x 10 x 19 in)

Powder coated aluminum, stainless steel, ABS plastic, and fiber filled PVC

ROTRF
Floor Adaptor for RHOTR

This adapter enables the RHOTR over-the-roof mount to be installed on horizontal and vertical roof/parapet surfaces. Multiple fastening positions ensure versatility for mounting on any combination of surfaces and angles.

SpeedDome Ultra Series SpeedDome Optima

2.59 kg (5.75 lbs)

369 x 240 x 240 mm (15 x 10 x 10 in)

Powder coated aluminum

ROENDC
End Cap Assembly

This mounting assembly allows existing outdoor installations containing any SpeedDome wall, pole, corner, or over-the-roof mount to be retrofitted to accommodate newer outdoor dome/housings. The assemblys modular design allows an installer to mount the housing to the end cap on the ground, before affixing the housing/end cap assembly to the mounting pole; this ensures a safe and easy installation.

SpeedDome Ultra Series SpeedDome Optima

.32 kg (.70 lbs)

64 x 103 x 194 mm (3 x 4 x 8 in)

Fiber filled PVC

Product specifications and availability subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.

VS233-03 08/04 L 2004 Sensormatic Electronics Corporation