Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

PLC-5 Programmable Controllers System Selection Guide

Download as pdf or txt
Download as pdf or txt
You are on page 1of 60

PLC-5 Programmable Controllers System Selection Guide

1785 and 1771

PLC-5 Programmable Controllers Comparison


Category Controller Catalog Number Maximum User Memory Words 8K 16K Total I/O Maximum Number of Communication Ports (Mode) 1 DH+ or Remote I/O (Adapter or Scan) 1 DH+ and 1 DH+ or Remote I/O (Adapter or Scan) 2 DH+ or Remote I/O (Adapter or Scan) 4 DH+ or Remote I/O (Adapter or Scan) 2 DH+ or Remote I/O (Adapter or Scan) and 1 Extended Local I/O 4 DH+ or Remote I/O (Adapter or Scan) 2 DH+ or Remote I/O (Adapter or Scan) and 1 Extended Local I/O 4 DH+ or Remote I/O (Adapter or Scan) 1 DH+ and 1 DH+ or Remote I/O (Adapter or Scan) 4 DH+ or Remote I/O (Adapter or Scan) 4 DH+ or Remote I/O (Adapter or Scan) 1 ControlNet (dual media) and 1 DH+ 1 ControlNet (dual media) and 2 DH+ or Remote I/O (Adapter or Scan) 1 ControlNet (dual media) and 2 DH+ or Remote I/O (Adapter or Scan) 1 ControlNet (dual media) and 2 DH+ or Remote I/O (Adapter or Scan) 1 Ethernet, 1 DH+ and 1 DH+ or Remote I/O (Adapter or Scan) 1 Ethernet, 2 DH+ or Remote I/O (Adapter or Scan) 1 Ethernet, 2 DH+ or Remote I/O (Adapter or Scan)

Standard

PLC-5/11 PLC-5/20

1785-L11B 1785-L20B

512 512

PLC-5/30 PLC-5/40 PLC-5/40L

1785-L30B 1785-L40B 1785-L40L

32K 48K 48K

1024 2048 2048

PLC-5/60 PLC-5/60L

1785-L60B 1785-L60L

64K 64K

3072 3072

PLC-5/80 Standard with Protected Memory PLC-5/26

1785-L80B 1785-L26B

100K 16K

3072 512

PLC-5/60 PLC-5/86 ControlNet PLC-5/20C PLC-5/40C

1785-L46B 1785-L86B 1785-L20C15 1785-L40C15

48K 100K 16K 48K

2048 3072 512 2048

PLC-5/80C

1785-L80C15

100K

3072

ControlNet with Protected Memory

PLC-5/46C

1785-L46C15

48K

2048

Ethernet

PLC-5/20E

1785-L20E

16K

512

PLC-5/40E

1785-L40E

48K

2048

PLC-5/80E

1785-L80E

100K

3072

Introduction

Introduction

1785 PLC-5 Programmable Controller: The Foundation of Control Architecture

The PLC-5 controller stands at the center of a control architecture that brings together existing and future systems by means of networks such as EtherNet/IPTM, ControlNetTM and DeviceNetTM, and offers connectivity among SLCTM 500 and ControlLogix and MicroLogixTM controllers. Because they include embedded network connections, PLC-5 controllers enable your control architecture to be flexible enough to include cost-effective connections to a wide range of devices.

I/O Modules Many Choices to Meet Your Exact Requirements

Controllers Information, Control and Device Communication Capability

Software Tools Program in Structured Text, Function Block, Sequential Function Charts or Ladder Logic Languages

PLC-5 System Overview Lay Out the System Selecting I/O Modules Selecting Network Communications Selecting Controllers Selecting Chassis Selecting Power Supplies Selecting Software ViewAnyWareTM Products Summary

page 2 page 4 page 7 page 18 page 30 page 36 page 38 page 42 page 49 page 52

Publication 1785-SG001A-EN-P - March 2004

Introduction

PLC-5 System Overview

A PLC-5 / 1771 control system, at minimum, consists of a programmable controller module and I/O modules in a single 1771 chassis with a power supply. You choose the controller with the on-board communication ports you need.
A simple system can consist of only a stand-alone controller and I/O modules all in a single chassis

PLC-5 Programmable Controller

1771 I/O Chassis Backplane

1771 I/O modules in the I/O chassis in which the PLC-5 controller resides. A maximum of 512 I/O.

On-board Universal Remote I/O scanner ports are available on all PLC-5 controllers. On-board extended-local I/O scanner ports are available on some PLC-5 controllers. On-board ControlNet ports are available on some PLC-5 controllers. To provide a DeviceNet I/O scanner port to the system, you must add a DeviceNet scanner module (1771-SDN).

Publication 1785-SG001A-EN-P - March 2004

Introduction

In the typical configuration illustration, a ControlNet port on the processor module interfaces the processor to the ControlNet link. In each of the two chassis remote from the processor, a 1771-ACN15 I/O adapter module provides I/O modules in those chassis with an interface to the ControlNet link. In this configuration, the PLC-5 processor monitors/controls the I/O in its local I/O chassis as well as the I/O in the remote locations.
Computers Controllers Internet Browsers (Ethernet only)

Ethernet ControlNet TM Data Highway Plus RS-232-C (DF1)

Ethernet

Ethernet Interface Module DeviceNet Scanner Module 1771 I/O Chassis Backplane 1771 I/O modules in the I/O chassis in which the PLC-5 controller resides. A maximum of 512 I/O. ControlNet Link DeviceNet Link

1734 I/O Modules 1769 I/O Modules 1790 I/O Blocks 1791D I/O Blocks 1792D I/O Blocks 1794 I/O Modules 1798 I/O Modules Other devices 1734 I/O Modules 1746 I/O Modules 1771 I/O Modules 1794 I/O Modules 1797 I/O Modules Other devices 1746 I/O Modules 1771 I/O Modules 1791 I/O Blocks 1794 I/O Modules Other devices 1771 I/O Modules

PLC-5 Programmable Controller

Universal Remote I/O Link

Extended-Local I/O Link

You plug a 1771 power supply module into an I/O module slot, or connect a stand-alone 1771 power supply into the left end of each chassis. Depending on the communication ports available on your particular PLC control system, you can select operator interfaces that are compatible with those particular ports.

Publication 1785-SG001A-EN-P - March 2004

Introduction

Lay Out the System

Lay out the system by determining the network configuration and the placement of components in each location. Decide at this time whether each location will have its own controller. Place each controllers I/O on an isolated network to maximize the performance and to more easily accommodate future network or system configuration changes. If you plan to share I/O, make sure the I/O is on a network that each controller can access. Assume that Network A and Network B both require a controller and its I/O. Both controllers interact with time critical information.
RSView Network C Panel C

Network A Panel A chassis 1 Panel A chassis 2 Panel A chassis 3

Network B Panel B chassis 1 Panel B chassis 2

Panel View

Panel View

For a PLC-5 controller to control I/O modules, both the controller and the I/O modules must be directly attached to the same network.
I/O Location Panel A, chassis 1 Panel A, chassis 2 Panel A, chassis 3 Panel B, chassis 1 Panel B, chassis 2 Panel C, chassis 1 Controller in Panel A, chassis 1 yes yes yes yes no yes Controller in Panel B, chassis 1 yes no no yes yes yes

Evaluate what communications need to occur between controllers. If there is sporadic information that is not time-critical, use a message-based network such as an EtherNet/IP (the information portion), Data Highway PlusTM, or the unscheduled portion of the ControlNet network. If the information is time-critical, such as producer/consumer tags between controllers, use the ControlNet or EtherNet/IP network.

Publication 1785-SG001A-EN-P - March 2004

Introduction

Applying Backup Solutions


The ControlNet hot backup module (1785-CHBM) provides backup of ControlNet I/O. A secondary controller qualifies critical control information with the primary controller. Both controllers consume information from inputs and connect to outputs, but only the primary controller controls the outputs. The secondary controller establishes control of outputs if the primary controller shuts down. For more information, see page 23.
ControlNet PLC-5 Controller with 1785-CHBM Cartridge Installed PanelViewTM Plus or other Interface Device ControlNet PLC-5 Controller with 1785-CHBM Cartridge Installed

Redundant ContolNet Network

1794 FLEXTM I/O

AND/ OR 1746 I/O

AND/ OR 1771 I/O

The PLC-5 Backup Communication Module (1785-BCM) helps increase the fault tolerance of PLC-5 programmable controller systems controlling I/O on a Universal Remote I/O link by providing backup of the PLC-5 programmable controller.
1785-BCM Module PLC-5 Controller 1785-BCM Module

PLC-5 Controller

High-speed Serial Link

Local I/O Chassis

DH+TM Link
Universal Remote I/O Link

Local I/O Chassis

DH+TM Link
Remote I/O Chassis Remote I/O Chassis

Terminator

1771-ASB Universal Remote I/O Link

1771-ASB

Cat. No. 1785-BCM

Connections 1771-WG wiring arm (included)

Customer Relay 0.25A @ 24V dc (resistive)

Design Considerations Place in local I/O chassis

Power Dissipation 10W maximum

Backplane Current Load 1A

Publication 1785-SG001A-EN-P - March 2004

Introduction

Use the following checklist as a guide to completing your own system specification. The inside of the back cover of this selection guide is a worksheet you can use to record your selections.
! Step 1 Selecting I/O Modules Select I/O based on: type of information to send/receive application requirements electrical requirements 2 3 Selecting Network Communications Select Networks based on: type of information to send/receive system performance distance/size of application available networks future expansion Selecting Controllers Select a controller based on: I/O requirements memory requirements communication requirements 4 Selecting Chassis Select a chassis based on: the number of slots you need 5 Selecting Power Supplies Select a power supply based on: input voltage output current number of slots required 7 Selecting Software Select software based on: computer platform operating environment programming language Selecting Software ............................................... page 42 Programming Software......................................... page 43 RSLinx Software ................................................. page 44 Network Configuration Software ........................... page 45 RSLogix Emulate 5 Software................................. page 46 PLC-5 and Training Software ................................ page 47 ViewAnyWare Products......................................... page 49 For more information, see 1771 I/O Modules ................................................. page 8 1746 I/O Modules ................................................. page 13 1794 I/O Modules ................................................. page 14 1797 I/O Modules ................................................. page 15 1791D I/O Modules............................................... page 16 NetLinx Architecture ............................................. page 18 Selecting a Network ............................................. page 19 EtherNet/IP Protocol.............................................. page 20 ControlNet ............................................................ page 22 DeviceNet............................................................. page 24 Serial Network...................................................... page 25 Data Highway Plus................................................ page 28 Universal Remote I/O ............................................ page 29 Enhanced Controllers............................................ page 31 Ethernet Controllers.............................................. page 32 ControlNet Controllers........................................... page 33 Protected Controllers ............................................ page 34 Backing Up Memory ............................................. page 35 Battery Replacement ............................................ page 35 1771 Chassis ....................................................... page 36 Mounting Dimensions........................................... page 37

1771 Power Supplies............................................ page 38 Power Requirements and Transformer Sizing........ page 39

Publication 1785-SG001A-EN-P - March 2004

Selecting I/O Modules

Step 1 - Select:
1771 I/O Modules 1746 I/O Modules 1794 FLEX I/O Modules 1797 FLEX Ex I/O Modules 1791D CompactBlock I/O Modules Encompass Partner Program I/O Modules

Selecting I/O Modules

Rockwell Automation offers many types of I/O modules and has more than 3 million modules installed in applications worldwide. Rockwell Automation offers chassis-based and both block and modular distributed modules. The following sections outline the available I/O modules. For more information about these I/O modules, see the Allen-Bradley I/O Module Brochure, publication ACIG-BR002 or visit the Rockwell Automation Distributed I/O website at: www.ab.com/io.

If Your Application Requires Preferred I/O for PLC-5, and native I/O providing highest performance is chassis-based and needs to accommodate a wide range of I/O types controls an entire process is a master/slave configuration for distributed control

Use this Type of I/O 1771 I/O see page 8

On Any of these Networks - ControlNet - Universal Remote I/O - Extended Local I/O On Any of these Networks - ControlNet - Universal Remote I/O - Extended Local I/O - EtherNet/IP - ControlNet - DeviceNet - Universal Remote I/O - Extended Local I/O - PROFIBUS DP - ControlNet via bus isolator - DeviceNet - Universal Remote I/O - DeviceNet - Local I/O - DeviceNet - Remote I/O - PROFIBUS DP multiple

If Your Application is chassis-based and requires different types of I/O has smaller size requirements than 1771 communicates with SLC controllers has distributed control that requires multiple types of I/O devices near a machine

Use this Type of I/O 1746 I/O see page 13 1794 FLEXTM I/O see page 14

has distributed control in a hazardous area requires rackless design with panel or DIN-rail mounting requires modular, high-density I/O has distributed control must have I/O mounted near sensors or actuators uses motor starters, solenoids, or indicators requires functionality not delivered in Rockwell Automation products

1797 FLEX ExTM I/O see page 15 1769 Compact I/OTM see page 15 1791D I/O CompactBlock I/OTM see page 16 EncompassTM Partners Program products see page 17

Publication 1785-SG001A-EN-P - March 2004

Selecting I/O Modules

1771 I/O Modules

The 1771 series I/O modules offer digital, analog, and special-requirement modules. The 1771 I/O modules feature a wide range of: signal interfaces to ac and dc sensors and actuators I/O densities with as many as 32 I/O points per module signal levels, including standard analog inputs and outputs and direct thermocouple and RTD temperature inputs PLC-5 controllers support 1771 I/O over these networks: Local I/O Universal Remote I/O Extended-local I/O ControlNet

When you select 1771 I/O modules, you must also select: chassis power supply adapter module (if in remote chassis or extended-local chassis)

1771 Digital Input Modules


Category Cat. No. Inputs and Outputs 8 in 16 in 8 in 16 in 32 in 8 in 8 in 16 in 72 in 7 in 8 in 8 in 8 in 16 in 8 in 32 in 8 in 16 in Voltage Backplane Current Load 122mA 130mA 74 mA 250mA 280mA 74mA 150mA 100mA 800mA 300mA 375mA 74mA 74mA 250mA 74mA 280mA 150mA 100mA

TTL 24V dc sink source load

1771-IG 1771-IGD 1771-IB 1771-IBD 1771-IBN 1771-IT 1771-IQ 1771-IQ16 1771-IS 1771-DW 1771-DS

--10-27V 10-30V 10-30V 12-24V 5-30V 10-32V isolated 5V multiplexer 15-27 wire fault 10-27V latching 42-56V 24-50V 20-60V 12-24V 10-30V 5-30V 10-32V isolated

48V dc sink source load

1771-IC 1771-IH 1771-ICD 1771-IV 1771-IVN 1771-IQ 1771-IQ16

24V dc source sink load

Publication 1785-SG001A-EN-P - March 2004

Selecting I/O Modules

Category

Cat. No.

Inputs and Outputs 8 in 16 in 6 in 16 in 16 in

Voltage

Backplane Current Load 80mA 250mA 74mA 195mA 75mA

24V ac

1771-IN 1771-IND

12-28V 16-30V ac 9-30V dc 92-138V isolated 79-138V 77-138V ac 105-138V dc isolated 87-138V ac 97-138V dc 85-138V 184-250V ac 166-230V dc 184-276V ac/dc 184-276V ac/dc

120V ac/dc

1771-ID 1771-IAD 1771-ID16

1771-IA 120V ac 200V ac/dc 220V ac/dc 1771-IAN 1771-IMD 1771-ID01 1771-IM

8 in 32 in 16 in 6 in 8 in

75mA 280mA 250mA 74mA 75mA

1771 Digital Output Modules


Category Cat. No. Inputs and Outputs 8 in 16 in 32 out 16 out 8 out 16 out 8 out 16 out 32 out 16 out 8 out 8 out 16 out 4 out 6 out 8 out 16 out 8 out 16 out 16 out 32 out 16 out Voltage Backplane Current Load 168mA 230mA 330mA 400mA 225mA 400mA 165mA 300mA 330mA 300mA 165mA 225mA 700mA 350mA 225mA 350mA 420mA 210mA 200mA 295mA 800mA 330mA

TTL 24V dc sink 24V dc source

1771-OG 1771-OGD 1771-OVN 1771-OQ16 1771-OQ 1771-OQ16 1771-OB 1771-OBD 1771-OBN 1771-OBDS

5.0-5.3V 5.0-5.3V 10-30V 10-32V isolated 20.4-26.4V isolated 10-32V isolated 10-27V 10-60V 10-30V 10-40V electronic fusing 42-53V 20-30V 10-60V 92-138V protected 92-138 isolated 92-138V isolated 85-138V isolated 92-138V 74-138V isolated 10-138V 80-265V 74-276 isolated

48V dc source 24V ac 120V ac

1771-OC 1771-ON 1771-OND 1771-OP 1771-OD 1771-ODZ 1771-ODD 1771-OA 1771-OD16 1771-OAD/B

120/240V ac

1771-OAN 1771-OMI16

Publication 1785-SG001A-EN-P - March 2004

10

Selecting I/O Modules

Category

Cat. No.

Inputs and Outputs 6 out 8 out 16 out 8 out

Voltage

Backplane Current Load 255mA 225mA 700mA 700mA

220V ac

1771-OR 1771-OM 1771-OMD

184-276V isolated 184-250V 184-250V 24-138V ac resistive load 24-125V dc 24-250V ac isolated 24-150V dc isolated 24-138V ac 24-125V dc 24-138V ac resistive load 24-125V dc 0-250V ac isolated inductive load 0-175V dc isolated 0-24V ac/dc 0-24V ac/dc

24-120V ac/dc relay contact

1771-OW

1771-OW16/B 1771-OWN 1771-OWNA

16 out 32 out 32 out

1.3A 2.5A 2.5A

1771-OX

4 out

550mA

0-24V ac/dc

1771-OYL 1771-OZL

8 out 8 out

420mA 420mA

1771 Analog Input Modules


Category selectable Cat. No. 1771-IFE 1771-IFF 1771-IL 1771-IE 1771-NIV 1771-NIV1 voltage only current only thermocouple 1771-IFMS 1771-NIS 1771-IXE 1771-IXHR 1771-NT1 1771-NT2 RTD 1771-IR 1771-NR Inputs and Outputs 8 differential or 16 single 8 differential or 16_single 8 differential, isolated 8 single 8 in 8 in 8 differential 8 in isolated 8 floating differential 8 floating differential 8mV/TC 8mV/TC 6 in 8 in Range: Voltage and Current +10V dc +20mA +10V dc +20mA +10V dc +20mA +10V dc +5V dc +20mA +10V dc +20mA 0-50mV 4-20mA +99.99mV +99.99mV +100mV -5/+55mV dc RTD RTD isolated Backplane Current Load 750mA 750mA 1.3A 500mA 1.5A 1.5A 750mA 2.9mA 750mA 750mA 1.5A 1.5A 800mA 1.5A

Publication 1785-SG001A-EN-P - March 2004

Selecting I/O Modules

11

Category mixed

Cat. No. 1771-NIVR 1771-NIVT

Inputs and Outputs 4V/current in 4V/current and 4mV/TC in

Range: Voltage and Current +5V dc +20mA +5V dc for volt/current +20mA +100mV for mV/TC

Backplane Current Load 1.5A 1.5A

1771 Analog Output Modules


Category selectable current only Cat. No. 1771-OFE1 1771-OFE2 1771-OFE3 1771-NOC voltage only 1771-NOV Inputs and Outputs 4 out 4 out 4 out 8 out 8 out Range: Voltage and Current +10V dc 4-20mA 0-50mA 0-25mA +10V dc Backplane Current Load 1.5A 1.5A 2.5A 2.9A at 20mA 3.3A at 25mA 2.1A

1771 Analog Combination Modules


Category selectable voltage selectable current current Cat. No. 1771-NBV1 1771-NBVC 1771-NB4S 1771-NBSC RTD 1771-NB4T 1771-NBRC 1771-NBTC Inputs and outputs 6 in 2 out 6 in 2 out 2 in 2 out isolated 6 in 2 out isolated 2 in 2 out 6 in 6 out 6 in 2 out Range: Voltage and Current +10V dc +20mA +5V dc/+20mA 0-25mA 4-20mA 0-25mA 4-20mA 0-25mA mV/TC +100mV 0-25mA RTD 0-25mA mV/TC +100mV 0-25mA Backplane Current Load 1.8A 1.8A 1.6A 3.0A 1.5A 1.8A 1.6A

Publication 1785-SG001A-EN-P - March 2004

12

Selecting I/O Modules

1771 Intelligent Modules


Category counter Cat. No. 1771-IJ 1771-IK 1771-VHSC 1771-DE 1771-DL positioning 1771-QA 1771-QB 1771-QC 1771-M3 1771-ES 1771-M1 1771-QD 1771-QDC 1771-QH 1771-HS 1771-HS1 1771-HS3 1771-HRA flow specialty 1771-CFM 1771-PM 1771-SIM 1771-DR 1771-PD 1771-DC 1771-DB 1771-LC temperature hydraulic plastics 1771-TCM 1771-QH 1771-QDC 1771-QI Use incremental encoder/counter high-speed counter very high speed counter absolute encoder gray encoder stepper motor positioning linear positioning servo positioning servo controller servo encoder feedback expander stepper motor controller injection molding plastic molding force control IMC 120 motion control IMC 121 motion control IMC 123 motion control resolver excitation configurable flowmeter clutch/brake control I/O simulator high-speed logic PID control real-time clock BASIC loop control temperature control high-speed transparent transition plastic molding co-injection 1.5A 1.2A 1.2A 1.2A 0.65A without DH-485 0,75A with DH-485 Backplane Current Load 1.2A 1.2A 0.65A 0.8A 0.12A 0.8A to 2.4A 1.6A 1.75A 1.75A 1.7A 1.75A 0.5A 1.2A 1.2A 0.72A 1.06A 1.06A 0.065A 1.0A 1.2A 0.2A 1.1A 1.2A

For more information about the family of 1771 I/O modules, see the following publications:
Publication Title 1771 Digital I/O AC Input and Output Modules Product Data 1771 Analog Input and Output Modules Product Data 1771 Digital I/O DC Input and Output Modules Product Data Publication Number 1771-2.182 1771-2.183 1771-2.180

Publication 1785-SG001A-EN-P - March 2004

Selecting I/O Modules

13

1746 I/O Modules

The 1746 I/O modules (SLC 500 I/O) provide a cost-effective Universal Remote I/O option. Use an SLC 500 Universal Remote I/O module (1747-ASB) or ControlNet adapter module (1747-ACN15 or -ACNR15) to directly interface 1746 I/O modules to the PLC-5 system. The 1746 I/O modules feature: high-density, 32-point and combination modules, which reduce rack size and panel space requirements removable terminal blocks and 16-point modules, which simplify wiring and replacing modules industrial design, including input filtering and optical isolation PLC-5 controllers support 1746 I/O over these networks: Universal Remote I/O ControlNet When you select 1746 I/O modules, you must also select: chassis power supply cabling components adapter module (if in remote chassis or extended-local chassis)

For more information, see the following publications:


Publication Title SLC 500 System Overview SLC Analog I/O Modules Technical Data SLC Thermocouple Module Technical Data SLC RTD/Resistance Module Technical Data SLC Modular Chassis and Power Supplies Technical Data Publication Number 1747-SO001 1746-TD001 1746-TD002 1746-TD007 1746-TD003

Publication 1785-SG001A-EN-P - March 2004

14

Selecting I/O Modules

1794 FLEX I/O Modules

FLEX I/O is a cost-effective, flexibile, modular I/O system for distributed applications and offers all the functions of larger rack-based I/O without the space requirements. You can independently select the I/O type, termination and network, appropriate for your specific application. This means one I/O product line can fit all your needs. The 1794 FLEX I/O modules feature: modular design, which reduces costs by solving a large range of application requirements with one I/O architecture small size, which reduces packaging costs individual wire termination locations, which reduce purchasing costs and complexity, as well as packaging costs diagnostics and Removal and Insertion Under Power (RIUP), which lowers the mean time to repair equipment and leverages your control investment flexible communications, which helps to control future costs by providing an economical migration path PLC-5 controllers support 1794 I/O over these networks: Universal Remote I/O ControlNet DeviceNet EtherNet/IP

For more information about 1794 FLEX I/O, see the FLEX I/O and FLEX Ex I/O Selection Guide, publication 1794-SG002.

Publication 1785-SG001A-EN-P - March 2004

Selecting I/O Modules

15

1797 FLEX Ex I/O Modules

The 1797 series I/O modules (FLEX Ex I/O) is a flexible, I/O system that mounts directly to the controlled equipment in a hazardous area. This eliminates the need for intrinsically safe (IS) barriers/isolators and separation of control and process. Additionally, the modules: offer modularity for distributed intrinsically-safe systems have dual-fault protection intrinsically-safe circuits that provide high fault tolerance have I/O circuitry that provides full Intrinsic Safety (IS) field-device protection PLC-5 controllers support 1797 I/O over these networks: Universal Remote I/O ControlNet DeviceNet When you select 1797 FLEX Ex I/O modules, you must also select: adapter module and cabling components bus isolator module and cabling components terminal base unit DIN rail power supply

For more information about 1794 FLEX I/O, see the FLEX I/O and FLEX Ex I/O Selection Guide, publication 1794-SG002.

Publication 1785-SG001A-EN-P - March 2004

16

Selecting I/O Modules

1791D CompactBlock I/O Modules

The 1791D I/O modules (CompactBlock I/O) are designed for applications that require I/O to be distributed close to sensors and actuators or to be placed in small enclosures. The modules feature: self-contained package that provides cost-effective distribution of up to 32 points per node small size that lets you install in shallow and confined areas hardware watchdog circuit DeviceLogixTM Smart Component Technology provides limited I/O logic for intelligent I/O block PLC-5 controllers support 1791D I/O over these networks: Universal Remote I/O DeviceNet PROFIBUS DP When you select 1791D I/O modules, the I/O circuits, a built-in power supply, and a Universal Remote I/O adapter are included. You must select an enclosure and cabling components. For more information about 1791D CompactBlock I/O, see the 1791D Block I/O Technical Data, publication 1791D-TD001.

Publication 1785-SG001A-EN-P - March 2004

Selecting I/O Modules

17

Additional I/O Selections

The Encompass Partners Program, Rockwell Automations third-party product referencing program, builds on the strengths of our products. As a technology-sharing program, Encompass is product-based and application-focused. Encompass allows third-party companies to provide functionality not delivered in Rockwell Automation products. The following table lists additional I/O choices that are part of the Encompass program.
Products 1771 LDT Interface Module 1771 Programmable Limit Switch 1771 Resolver Interface Module Gemco Series 1771 PLS 1771 GPS Time Stamp Module Dial Up and Leased Line Modems Fiber Optic Modems PLC-5 Scanners for: Interbus-S ASi PROFIBUS DP 1771-WS Weigh Scale Module Optical Comm Modules for: Ethernet ControlNet DF-1 Data Highway DH-485 ModbusTM RS-232 RS-485 C Programmable Solutions AGA/API Flow Computers HART Honeywell DE Interface Modbus PlusTM Communications-PLC PLC Protocol Solutions PLC Protocol Solutions-MVI Encompass Partner Advanced Micro Controls, Inc.

Ametek Automation and Process Technologies Hiprom Ltd. Miille Applied Research Company, Inc. Weed Instrument Woodhead

Hardy Instruments Phoenix Digital Corporation

ProSoft Technology, Inc.

High-Density 32 Analog Input Module Isolated AC 16 Triac Output Module Isolated AC/DC 16 Input Module

Spectrum Controls, Inc.

For more detailed information, refer to the Encompass product directory, publication 6873-QR003, or see www.automation.rockwell.com/encompass.

Publication 1785-SG001A-EN-P - March 2004

18

Notes

Publication 1785-SG001A-EN-P - March 2004

Selecting Network Communications

19

Step 2 - Select: EtherNet/IP Protocol ControlNet Network DeviceNet Network Serial Network Data Highway Plus Universal Remote I/O

Selecting Network Communications

Use specific PLC-5 controllers with network connections and install multiple communication modules into the PLC-5 backplane to route control and information data between the different networks. The networking capabilities, led by EtherNet/IP network, ControlNet network, and DeviceNet network, allow information exchange between a range of devices and computing platforms and operating systems. PLC-5 controllers come with different network connections. Choose the network(s) that best meets your needs.

NetLinx Architecture
NetLinx open network architecture is the Rockwell Automation strategy of using open networking technology for seamless, top-floor to shop-floor integration. The networks in the NetLinx architecture - DeviceNet, ControlNet and EtherNet/IP - speak a common language and share a universal set of communication services. NetLinx architecture, part of the Integrated Architecture, seamlessly integrates all the components in an automation system from a few devices on one network to multiple devices on multiple networks including access to the Internet - helping you to improve flexibility, reduce installation costs and increase productivity. EtherNet/IP is an open industrial networking standard that supports implicit and explicit messaging and uses commercial, off-the-shelf Ethernet equipment and physical media. ControlNet allows intelligent, high-speed control devices to share the information required for supervisory control, work-cell coordination, operator interface, remote device configuration, programming and troubleshooting. DeviceNet offers high-speed access to plant-floor data from a broad range of plant-floor devices and a significant reduction in wiring..

Publication 1785-SG001A-EN-P - March 2004

20

Selecting Network Communications

Selecting a Network
You can configure your system for information exchange between a range of devices and computing platforms and operating systems.
If Your Application Requires high-speed data transfer between information systems and/or a large quantity of controllers Internet/Intranet connection program maintenance high-speed transfer of time-critical data between controllers and I/O devices deterministic and repeatable data delivery program maintenance media redundancy or Intrinsic Safety options connections of low-level devices directly to plant floor controllers, without the need to interface them through I/O modules more diagnostics for improved data collection and fault detection less wiring and reduced start-up time than a traditional, hard-wired system plantwide and cell-level data sharing with program maintenance Use this Network EtherNet/IP network Select 1785-L20E controller 1785-L40E controller 1785-L80E controller or Applicable PLC-5 with 1785-ENET interface module

ControlNet network

1785-L20C15 1785-L40C15 1785-L80C15

DeviceNet network

PLC-5 controller with 1771-SDN scanner module

Data Highway Plus

All PLC-5 controllers have at least one built-in, configurable Data Highway Plus channel All PLC-5 controllers have at least one built-in, configurable Universal Remote I/O channel All PLC-5 controllers have one built-in serial port configurable for RS-232, RS-423 or RS-422A

connections between controllers and I/O adapters distributed controllers so that each controller has its own I/O and communicates with a supervisory controller modems messages that send and receive ASCII characters to or from devices such as ASCII terminals, bar code readers, message displays, weigh scales, or printers supervisory control and data acquisition (SCADA)

Universal Remote I/O

serial network

Publication 1785-SG001A-EN-P - March 2004

Selecting Network Communications

21

EtherNet/IP Protocol

Ethernet/IP is an open industrial networking standard that supports implicit messaging (real-time I/O messaging), explicit messaging (messaging exchange), or both and uses commercial off-the-shelf Ethernet communication chips and physical media. Additionally, EtherNet/IP uses the protocols used by the internet. Both the PLC-5 and Ethernet Interface Module (1785-ENET) contain features that allow you to use the Internet to access product information and to create and enhance application diagnostics.

Ethernet PLC-5 Controllers


Cat. No. Max. User Total I/O Memory Maximum (words) 16K 512 any mix or 512 in + 512 out (complement) 48K 2048 any mix or 2048 in + 2048 out (complement) 100K 3072 any mix or 3072 in + 3072 out (complement) Channels Maximum Number of I/O Chassis Cable Total Extended Remote ControlNet -Local 13 0 12 0 5810-TC02 or 5810-TC15 61 0 60 0 5810-TC02 or 5810-TC15 65 0 64 0 5810-TC02 or 5810-TC15 Power Dissipation Max. 18.9W 18.9W 18.9W Backplane Current Load 3.6A 3.6A 3.6A

1785-L20E 1785-L40E 1785-L80E

1 Ethernet 1DH+ 1 DH+/remote I/O 1 Ethernet 2 DH+/remote I/O 1 Ethernet 2 DH+/remote I/O

laptop Internet server modem personal computer workstation HP 9000 or VAX computer PLC-5/20E controller SLC 5/05 controller

Ethernet

ControlLogix Gateway or Logix5550 controller

PLC-5 controller with Ethernet sidecar module

ControlLogix Gateway

PLC-5 controller

Data Highway Plus ControlNetTM

Publication 1785-SG001A-EN-P - March 2004

22

Selecting Network Communications

PLC-5 Ethernet Interface Module


The PLC-5 Ethernet Interface Module (1785-ENET) is a single-slot module that attaches to the side of any Enhanced PLC-5 series B or later controller, Ethernet PLC-5 controller, or ControlNet PLC-5 controller to provide additional Ethernet connectivity.
Cat. No. 1785-ENET When Used with Ethernet PLC-5 controller Enhanced PLC-5 controller ControlNet PLC-5 controller The Interface Module Provides additional Ethernet connectivity by supporting dual Ethernet links Ethernet connectivity without sacrificing DH+ or Universal Remote I/O ports dedicated Ethernet connectivity for plant and office integration

Using the Ethernet Interface Modules built-in communication capabilities, your entire enterprise can use standard Ethernet or Internet connectivity to control and monitor production. Using the Internet and Web browser, you can create your own custom Web pages to provide executive summaries of process information. These pages are accessible to any Internet user who has network access to the PLC-5 controller. The embedded Web server provides access to PLC-5 diagnostics. Domain Name Service (DNS) and Simple Network Management Protocol (SNMP) are also supported.
Cat. No. Comm. Rate Connections Design Considerations Cable 1785-TC02 or 1785-TC15 Power Dissipation, Max. 11.5W Backplane Current Load 2.2A

1785-ENET 10 Mbps

64 TCP/IP connections Place in I/O chassis second 512 unsolicited definitions left-most slot attached to per module controller

Publication 1785-SG001A-EN-P - March 2004

Selecting Network Communications

23

ControlNet Network

ControlNet PLC-5 controllers offer embedded ControlNet communication capabilities for control and information processing. The ControlNet network provides both I/O control and peer-to-peer communications on a 5Mbps network, with repeatability and determinism. You can have multiple ControlNet PLC-5 controllers on one ControlNet network, with each controller handling its own I/O on the network, and at the same time communicating with each other. Multiple controllers can receive input data from one I/O or device node.

ControlNet PLC-5 Programmable Controllers


Cat. No. Max. User Total I/O Memory Maximum (words) 16K 512 any mix or 512 in + 512 out (complement) Channels Maximum Number of I/O Chassis Total Extended Remote -Local 1 ControlNet 1 DH+ 1 DH+/remote I/O 77 0 12 ControlNet Cable I/O Map Entries 64 1786-CP Power Backplane Dissipation Current Max. Load 15.8W 3.0A

1785-L20C15

1785-L40C15

48K

2048 any mix or 1 ControlNet 2048 in + 2048 out 2 DH+/remote I/O (complement) 2048 any mix or 1 ControlNet 2048 in + 2048 out 2 DH+/remote I/O (complement) 3072 any mix or 1 ControlNet 3072 in + 3072 out 2 DH+/remote I/O (complement)

125

60

96

1786-CP

15.8W

3.0A

1785-L46C15 Protected 1785-L80C15

48K

125

60

96

1786-CP

15.8W

3.0A

100K

125

92

128

1786-CP

15.8W

3.0A

workstation running programming software with 1784-KTCx

ControlNet

FLEX I/O adapter PanelView 1200 operator terminal ControlLogix Gateway or Logix5550 controller PLC-5/40C controller 1395 Drive

Publication 1785-SG001A-EN-P - March 2004

24

Selecting Network Communications

ControlNet Communication Adapters


Cat. No. Function Comm. Rate Design Considerations Cable Power Dissipation, Max. 5.2W 5W 3.4W Backplane Current Load 1.0A 900mA 640mA

1771-ACN15, Interfaces 1771 I/O modules in an 1771 5 Mbps -ACNR15 chassis to a ControlNet scanner port across a ControlNet network 1747-ACN15, Interfaces SLC I/O modules in an SLC 5 Mbps -ACNR15 chassis to a ControlNet scanner port across a ControlNet network 1794-ACN15, Interfaces FLEX I/O modules in FLEX 5 Mbps -ACNR15 rack to a ControlNet scanner port across a ControlNet network

Place in remote ControlNet chassis. Requires a ControlNet PLC-5 controller. Requires a remote ControlNet PLC-5 controller. Requires a remote ControlNet PLC-5 controller.

Quad shield RG-6 coaxial cable Quad shield RG-6 coaxial cable Quad shield RG-6 coaxial cable

ControlNet Hot Backup Module


The ControlNet hot backup module provides backup of ControlNet I/O. A secondary controller qualifies critical control information with the primary controller. Both controllers consume information from inputs and connect to outputs, but only the primary controller controls the outputs. The secondary controller establishes control of outputs if the primary controller shuts down.

ControlNet Hot Backup Basic System


Cat. No. 1785-CHBM 1785-L40C15/F or 1785-L80C15/F* 1771-A1B thru -A4B 1771-P4 thru -P10 1771-ACN or 1747-ACN or 1794-ACN 1784-KTCX15 or 1784-PCC card 9234 Series 9357-CNETL3 9234 Series Other System Requirements Quantity 2 2 2 2 1 1 1 1 1 Description ControlNet Hot Backup Modules ControlNet PLC-5 Programmable Controllers, Series F or later 1771 I/O Chassis 1771 Power Supplies ControlNet Adapter Communication card for personal computer or laptop computer RSLogixTM 5 Programming Software (release 3.22 or later) RSNetWorxTM for ControlNetTM Software (release 1.80.xx or later)

RSLinx GatewayTM Communication Software (release 2.00.97.30 or later) ControlNet network cables, taps and terminators for connections between the PLC-5 controllers and I/O adapters

* Both controllers must have the same series and firmware revision

ControlNet PLC-5 Controller with 1785-CHBM Cartridge Installed

PanelViewTM Plus or other Interface Device

ControlNet PLC-5 Controller with 1785-CHBM Cartridge Installed

Redundant ContolNet Network

1794 FLEXTM I/O

AND/ OR 1746 I/O

AND/ OR 1771 I/O

Publication 1785-SG001A-EN-P - March 2004

Selecting Network Communications

25

DeviceNet Network

1771-SDN DeviceNet Scanner Module


The scanner module acts as an interface between DeviceNet devices and a PLC-5 controller. The scanner module communicates with DeviceNet devices over the network to: read and write inputs and outputs to and from a device download configuration data to a device monitor operational status of a device The scanner module is a single-slot module that resides in a 1771 I/O chassis that either contains a PLC-5 controller or is on an extended-local I/O link, universal remote I/O link, or ControlNet network connected to a PLC-5 controller. The scanner module has Auto Device Replacement, change of state, cyclic I/O, pass-through and slave mode capability. The number of PLC DeviceNet scanners that can reside in the same I/O chassis is limited only by the I/O chassis size, power supply capacity, and available memory.

Cat. No.

Function

Comm. Rate

Connections

Design Considerations

Cable

Power Backplane Dissipation, Current Max. Load 1.2A

1771-SDN

Interfaces a local PLC-5 125K controller to a maximum 250K of 2 DeviceNet networks 500K

63 connections per DeviceNet channel

Place in the local I/O chassis

1771-CD 6.3W 10-pin linear plug, 1787-PLUG10R

PLC-5 controller with 1771-SDN scanner module

Logix5550 controller with 1756-DNB module

DeviceNet

other devices motor starter laptop

sensor pushbutton cluster

input/output devices drive

indicator lights

bar code scanner

Publication 1785-SG001A-EN-P - March 2004

26

Selecting Network Communications

Serial Network

The PLC-5 serial port is configurable for RS-232, RS-423, or RS-422A compatible serial communication. Use the serial port to connect devices that: communicate using the DF1 protocol, such as modems, communication modules, programming workstations, or other serial devices. send and receive ASCII characters, such as ASCII terminals, bar-code readers, and printers. When configured for system mode, the serial port supports the DF1 protocol. Use system mode to communicate with others devices on the serial link. You can select a DF1 mode:
Use this DF1 Mode point-to-point For communication between a PLC-5 controller and other DF1-compatible devices. in point-to-point mode, the PLC-5 controller uses DF1 full-duplex protocol. control of polling and message transmission between the master and each remote node. in master mode, the PLC-5 controller uses DF1 half-duplex polled protocol. using the controller as a slave station in a master/slave serial network. in slave mode, the PLC-5 controller uses DF1 half-duplex protocol.

DF1 master

DF1 slave

The serial port (in system mode) also supports supervisory control and data acquisition (SCADA) applications. SCADA systems let you monitor and control remote functions and processes using serial communication links between master and slave locations.
Cat. No. Function Comm. Rate Connections Design Considerations Cable Power Backplane Dissipation, Current Max. Load 6.8W 1.3A

1771-DA

Interfaces a PLC-5 controller and a peripheral device that generates ASCII characters

configurable, RS-232-C depending Current loop, 20mA on serial protocol

Place in the local I/O chassis

Custom 26-pin cable*

* See the Enhanced and Ethernet PLC-5 Programmable Controllers User Manual, publication 1785-6.5.12.

Publication 1785-SG001A-EN-P - March 2004

Selecting Network Communications

27

The PLC BASIC Module occupies one slot in the 1771 I/O chassis and runs user-written BASIC and C programs. These programs are independent of your PLC-5 controller and provide an easy and fast interface between a PLC-5 controller, 1771 backplane and RS-232, -422 or -485 devices. The module can also communicate with a remote SLC controller or remote device on the DH-485 network through a DH-485 port.
Cat. No. Function Comm. Rate Connections Design Considerations Cable Power Dissipation, Max. 4W Backplane Current Load .75A (with 1747-PIC) .65A

1771-DB

Provides an interface between a PLC-5 controller, 1771 backplane and RS-232, -422 or -485 devices

configurable, 2 ports for RS-232, Place in the local I/O depending on -422 or -485 chassis serial protocol 1 port for DH-485

Data Highway 1770-CD RS-232 1770-CG or Modem Interface Cable 1770-CP

The communication controller modules, 1771-KE and 1771-KF link intelligent RS-232-C devices to Data Highway. Both of these modules provides a choice of two protocols on the RS-232-C link - full duplex and half duplex. These modules perform the same functions, however their mounting styles and power supply requirements are different.
Cat. No. Function Comm. Rate Data Highway 57K bps RS-232-C from 110 to 19Kbps Data Highway 57K bps RS-232-C from 110 to 19Kbps Connections Design Considerations Cable Power Dissipation, Max. 6.3W Backplane Current Load 1.2A

1771-KE

Provides an interface between RS-232-C devices and Data Highway link with both full and half duplex protocols

Data Highway, RS-232

Place in the local I/O chassis. Power source is the 1771 I/O chassis power supply.

Data Highway 1770-CD RS-232 1770-CG or Modem Interface Cable 1770-CP

1771-KF

Provides an interface between RS-232-C devices and Data Highway link with both full and half duplex protocols

Data Highway, RS-232

Includes mounting Data Highway 6.3W bracket for external 1770-CD mounting or in a standard RS-232 industrial enclosure 1770-CG or (NEMA Type 12 or Modem similar). Power source is Interface Cable user-supplied (1771-P2 or 1770-CP similar).

1.2A

Publication 1785-SG001A-EN-P - March 2004

28

Selecting Network Communications

When configured for user mode, the serial port supports ASCII devices. Use the PLC-5 ASCII instructions to send and receive information from these devices.

Computer Workstation

Server DCE Remote Station Ethernet

Computer Workstation

Modem PLC-5/40E Workstation Remote Station Master Station Oil Well Modem Modem

Gas Well

Remote Station Unloading Storage Facility Storage Tanks Tank Farm

Remote Station Mainline Pump Station

Remote Station Refinery Storage

Remote Station

Remote Station Mainline Pump Station

Remote Station Storage/ Delivery Facility Storage Tanks

Storage Tanks

Storage Tanks

Unloading Dock

Metered Truck Rack


20031-M

Publication 1785-SG001A-EN-P - March 2004

Selecting Network Communications

29

Data Highway Plus

The Data Highway Plus (DH+) network is a local area network designed to support remote programming and data acquisition for factory-floor applications. You can also use DH+ communication modules to implement a small peer-to-peer network. You can use a DH+ network for data transfer to other PLC-5 controllers or high-level computers and as a link for programming multiple PLC-5 controllers. A PLC-5 controller can communicate over a DH+ network with other controllers and with a workstation. The DH+ network supports daisy chain and trunkline-dropline configurations.
PLC-5 controller PLC-5 controller workstation

workstation with RSLogix 5 software

Data Highway Plus

SLC-5/04 controller

ControlLogix chassis with 1756-DHRIO module

Cat. No.

Function

Comm. Rate

Connections

Design Considerations

Cable

1785-KA

Provides an interface between Data Highway Plus and Data Highway-485 link

DH+ 57K DH+ bps DH-485 DH-485 configurable

1785-KE

Provides an interface between Data Highway Plus and RS-232-C link

DH+ 57K DH+ bps RS-232-C RS-232-C configurable

Place in the local chassis Data Highway 1770-CD RS-232 1770-CG or Modem Interface Cable 1770-CP Place in the local chassis Data Highway 6.3W 1770-CD RS-232 1770-CG or Modem Interface Cable 1770-CP

Power Dissipation, Max. 10.5W

Backplane Current Load 2.0A

1.2A

Publication 1785-SG001A-EN-P - March 2004

30

Selecting Network Communications

Universal Remote I/O

The strength and versatility of the Universal Remote I/O network comes from the breadth of products it supports. In addition to 1771 I/O, the Universal Remote I/O network supports many Rockwell Automation and third-party devices. Typical applications range from simple I/O links with controllers and I/O, to links with a variety of other devices. You connect devices through remote I/O adapter modules or built-in remote I/O adapters. Using the Universal Remote I/O network instead of direct-wiring a device over a long distance to a local I/O chassis helps reduce installation, start-up, and maintenance costs by placing the I/O closer to the sensors and actuators. Some devices like PLC-5 support Pass-Through, which lets you configure devices on a Universal Remote I/O network from an Ethernet, ControlNet or Data Highway Plus network.

workstation with PanelBuilderTM software

ControlNet, EtherNet/IP, or DH+ network

PLC-5 controller

Universal Remote I/O link

FLEX I/O adapter PanelView 1200 operator terminal

SLC I/O adapter

1771 I/O adapter

Cat. No.

Function

Comm. Rate 57.6Kbps 115Kbps 230Kbps

Connections

Design Considerations

Cable

1771-ASB

Interfaces I/O modules in an I/O chassis to a remote scanner port across a Universal Remote I/O link 1771-DCM Provides a remote I/O adapter port for a local PLC-5 controller to communicate with a remote I/O scanner port of a supervisory process across a Remote I/O link

Universal Remote I/O adapter port

Place in a remote chassis. 1770-CD Requires and PLC-5 Belden 9463 controller that supports Universal Remote I/O Place in the local chassis 1770-CD Belden 9463

Power Dissipation, Max. 5.2W

Backplane Current Load 1.0A

57.6Kbps 115.2Kbps

Universal Remote I/O adapter port

6.3W

1.2A

Publication 1785-SG001A-EN-P - March 2004

Selecting Controllers

31

Step 3 - Select:
Enhanced PLC-5 Controllers Ethernet PLC-5 Controllers ControlNet PLC-5 Controllers Protected PLC-5 Controllers EEPROM Memory Modules Replacement Batteries

Selecting Controllers

PLC-5 controllers are high-speed, single-slot controllers you can use for control and information processing. PLC-5 controllers are designed for larger sequential and regulatory control applications with specialized I/O requirements and/or the need to coordinate with other controllers and devices. PLC-5 controllers come with different memory sizes and network connections. The Enhanced PLC-5 controllers offer a standard set of functions and communication options. The other PLC-5 controllers offer different communication options, while maintaining the same functions. Choose the controller that best meets your needs:
If Your Application Requires connectivity to a large number of Universal Remote I/O devices connectivity to a large number of DH+ devices EtherNet/IP connectivity communication with other Ethernet PLC-5 controllers and host computers high-speed communication for control and information processing deterministic, repeatable data transfers ControlNet connectivity limited access to critical or proprietary areas of programs selectively access to processor memory and I/O elements restricted use of processor operations Select From Enhanced PLC-5 Controllers see page 32 Ethernet PLC-5 Controllers see page 32 ControlNet PLC-5 Controllers see page 33

Protected PLC-5 Controllers see page 35

Publication 1785-SG001A-EN-P - March 2004

32

Selecting Controllers

Enhanced PLC-5 Controllers

Every PLC-5 controller offers built-in, configurable ports for Data Highway Plus (DH+) or Universal Remote I/O. A DH+ connection supports remote programming and information access, in addition to peer-to-peer communication between the PLC-5, other controllers and devices. A Universal Remote I/O connection supports real-time data exchange for I/O, operator interface, and other third-party devices.

Cat. No.

Maximum Total I/O Maximum Channels User Memory (words) 8K 512 any mix or 384 in + 384 out (complement) 512 any mix or 512 in + 512 out (complement) 1024 any mix or 1024 in + 1024 out (complement) 2048 any mix or 2048 in + 2048 out (complement) 3072 any mix or 3072 in + 3072 out (complement) 3072 any mix or 3072 in + 3072 out (complement) 1 DH+/remote I/O

Maximum Number of I/O Chassis Total 5 Extended Remote -Local 0 4

Power Backplane Dissipation, Current ControlNet Maximum Load 0 12W 2.3A

1785-L11B

1785-L20B

16K

1 DH+ 1 DH+/remote I/O 2 DH+/remote I/O

13

12

12W

2.3A

1785-L30B

32K

29

28

12W

2.3A

1785-L40B

48K

4 DH+/remote I/O

61

32 max/link 32 max/link 32 max/link

17.3W

3.3A

1785-L60B

64K

4 DH+/remote I/O

93

17.3W

3.3A

1785-L80B

100K

4 DH+/remote I/O

93

17.3W

3.3A

Publication 1785-SG001A-EN-P - March 2004

Selecting Controllers

33

Ethernet PLC-5 Controllers

The Ethernet PLC-5 controller integrates the Allen-Bradley architecture into an industry-standard EtherNet/IP system, offering a flexible and open solution. With the Ethernet PLC-5 controllers built-in communication capabilities, your entire enterprise can use standard Ethernet or Internet connectivity to control and monitor production. Using the Internet and Web browser, you can create your own custom Web pages to provide executive summaries of process information. These pages are accessible to any Internet user who has network access to the PLC-5 processor. The embedded Web server provides access to PLC-5 diagnostics. Domain Name Service (DNS) and Simple Network Management Protocol (SNMP) are also supported.

Cat. No.

Maximum Total I/O Maximum User Memory (words) 16K 512 any mix or 512 in + 512 out (complement) 2048 any mix or 2048 in + 2048 out (complement) 3072 any mix or 3072 in + 3072 out (complement)

Channels

Maximum Number of I/O Chassis Total Extended -Local 0 Remote 12

Power Backplane Dissipation, Current ControlNet Max. Load 0 19W 3.6A

1785-L20E

1 Ethernet 1 DH+ 1 DH+/remote I/O 1 Ethernet 2 DH+/remote I/O 1 Ethernet 2 DH+/remote I/O

13

1785-L40E

48K

61

60

19W

3.6A

1785-L80E

100K

65

64

19W

3.6A

Publication 1785-SG001A-EN-P - March 2004

34

Selecting Controllers

ControlNet PLC-5 Controllers

The ControlNet PLC-5 controller offers embedded ControlNet communication capabilities for control and information processing. The ControlNet network provides both I/O control and peer-to-peer communications on a 5Mbps network, with repeatability and determinism. You can have multiple ControlNet PLC-5 controllers on one ControlNet network, with each controller handling its own I/O on the network, and at the same time communicating with each other. Multiple controllers can receive input data from one I/O or device node.

Cat. No.

Max. User Total I/O Memory Maximum (words) 16K 512 any mix or 512 in + 512 out (complement) 2048 any mix or 2048 in + 2048 out (complement) 2048 any mix or 2048 in + 2048 out (complement) 3072 any mix or 3072 in + 3072 out (complement)

Channels

Maximum Number of I/O Chassis Total Extended Remote -Local 0 12

ControlNet Power Backplane I/O Map Dissipation, Current Entries Max. Load 64 15.8W 3.0A

1785-L20C15

1 ControlNet 1 DH+ 1 DH+/remote I/O 1 ControlNet 2 DH+/remote I/O 1 ControlNet 2 DH+/remote I/O 1 ControlNet 2 DH+/remote I/O

77

1785-L40C15

48K

125

60

96

15.8W

3.0A

1785-L46C15 Protected 1785-L80C15

48K

125

60

96

15.8W

3.0A

100K

125

92

128

15.8W

3.0A

Publication 1785-SG001A-EN-P - March 2004

Selecting Controllers

35

Protected PLC-5 Controllers

The Protected PLC-5 controller lets you limit access to critical or proprietary areas of programs, selectively guard controller memory and I/O, or restrict use of controller operations. The distinctive safety-yellow labels on the controller identify the protected PLC-5 controller. Use the programming software to assign class privileges to specific user accounts or a users job function, such as system administrator, plant engineer, maintenance engineer, or operator. Using four privilege classes and associated passwords, you can limit access to critical areas of programs and restrict access to: communication channels remote nodes attached to the ControlNet or DH+ network program files data files

The protected PLC-5 controller expands system validity and security beyond that provided by the password-and-privilege feature of the other PLC-5 controllers. The Rockwell Automation clutch/brake application package combines the protected PLC-5 controller with specially-designed software to support stamping press applications.
Cat. No. Maximum Total I/O Maximum User Memory (words) 16K 512 any mix or 512 in + 512 out (complement) 2048 any mix or 2048 in + 2048 out (complement) 2048 any mix or 2048 in + 2048 out (complement) 3072 any mix or 3072 in + 3072 out (complement) Channels Maximum Number of I/O Chassis Total 1 DH+ 1 DH+/remote I/O 4 DH+/remote I/O 1 ControlNet 2 DH+/remote I/O 4 DH+/remote I/O 13 Extended Remote -Local 0 12 ControlNet Power Backplane I/O Map Dissipation, Current Entries Max. Load 0 12W 2.3A

1785-L26B

1785-L46B

48K

61

32 max/link 60

17.3W

3.3A

1785-L46C15 Protected 1785-L86B

48K

125

96

15.8W

3.0A

100K

93

32 max/link

17.3W

3.3A

Publication 1785-SG001A-EN-P - March 2004

36

Backing up Controller Memory

You can back up program files using an EEPROM module. This EEPROM module comes in four sizes:
Cat. No. Provides this Amount of Backup Memory 1785-ME16* 16K words 1785-ME32 32K words 1785-ME64 64K words 1785-ME100 100K words 1785-CHBM 100K words *Not for use with ControlNet PLC-5 controllers.

Battery Replacement and Life Estimates


Cat. No. 1770-XYC Applies to All PLC-5 Programmable Controllers When Used in this Contoller PLC-5/11, -5/20 and -5/20E All Others At this Temperature 60oC 25oC 60oC 25oC Battery Life Estimate Power off 100% Power off 50% 256 days 1.4 years 2 years 84 days 1 year 4 years 150 days 1.2 years

Publication 1785-SG001A-EN-P - March 2004

Selecting Chassis

37

Selecting Chassis

1771 Chassis
Step 4 - Select Chassis:
with the number of slots you need that meet your power supply requirements that meet your panel size and space limitations

The PLC-5 programmable controller requires a 1771 chassis to contain the various modules. Chassis are available in sizes of 1, 2, 4, 8, 12, and 16 module slots. The backplane provides a communication path between the I/O modules and either the controller or the I/O adapter module. The consistent size and mounting of the available 1771 chassis provide a universal configuration for system design and chassis-mounting configurations. If you anticipate that your system will expand, you may want to purchase larger chassis for future expansion.

Cat. No. 1771-A1B 1771-A2B 1771-A3B

Description I/O chassis for 1771 I/O modules I/O chassis for 1771 I/O modules I/O chassis for 1771 I/O modules

No. I/O Slots 4 slots 8 slots 12 slots 12 slots 16 slots

Dimensions (H x W x D) 315 x 229 x 193 mm (12.4 x 9.0 x 7.6 in)

Weight kg (lb) Mounting Type 3.6 (8.0) Back-panel Back-panel 19-inch rack or back-panel Back-panel Back-panel Back-panel

315 x 356 x 193 mm (12.4 x 14.0 x 7.6 in) 4.7 (10.3) 339 x 484 x 217 mm (13.5 x 19.0 x 8.5 in) 3.6 (8.0) 315 x 483 x 193 mm (12.4 x 19.0 x 7.6 in) 5.7 (12.6) 315 x 610 x 193 mm (12.4 x 24.0 x 7.6 in) 6.7 (14.8) 311 x 203 x 180 mm (12.2 x 8.0 x 7.1 in) 1.9 (4.1)

1771-A3B1 I/O chassis for 1771 I/O modules 1771-A4B 1771-PSC I/O chassis for 1771 I/O modules

Power-supply chassis (for connecting power 4 slots directly or through a cable to an I/O chassis). Slots for installation of power supplies and modules requiring only power from the backplane.

1771-AM1 I/O chassis with integral remote I/O adapter 1 slot and power supply (3A available for I/O modules) 1771-AM2 I/O chassis with integral remote I/O adapter 1 slot and power supply (3A available for I/O modules)

298 x 70 x 187 mm (11.7 x 2.7 x 7.3 in)

1.4 (3.0)

Back-panel

298 x 130 x 187 mm (11.7 x 5.1 x 7.3 in)

2.3 (5.0)

Back-panel

Publication 1785-SG001A-EN-P - March 2004

38

Selecting Chassis

Mounting Dimensions
Minimum spacing requirements for a processor-resident chassis: Mount the I/O chassis horizontally. Allow 153 mm (6 in) above and below the chassis. Allow 102 mm (4 in) on the sides of each chassis. Allow 51 mm (2 in) vertically and horizontally between any chassis and the wiring duct or terminal strips. Leave any excess space at the top of the enclosure, where the temperature is the highest.
Area reserved for disconnect, transformer, control relays, motor starters, or other user devices.

153mm (6")

51mm (2")

102mm (4") 102mm (4")

51mm(2")

153mm (6")

Wiring Duct

13081

Minimum spacing requirements for a remote I/O and extended-local I/O chassis: Mount the I/O chassis horizontally. Allow 153 mm (6 in) above and below all chassis. When you use more than one chassis in the same area, allow 152.4 mm (6 in) between each chassis. Allow 102 mm (4 in) on the sides of each chassis. When you use more than one chassis in the same area, allow 101.6 mm (4 in) between each chassis. Allow 51 mm (2 in) vertically and horizontally between any chassis and the wiring duct or terminal strips. Leave any excess space at the top of the enclosure, where the temperature is the highest.
Area reserved for disconnect, transformer, control relays, motor starters, or other user devices.

102mm (4")

153mm (6")

51mm (2") 153mm (6") 51mm (2") Wiring Duct

102mm (4")

102mm (4")

153mm (6")

Wiring Duct

18749

Publication 1785-SG001A-EN-P - March 2004

Selecting Power Supplies

39

Selecting Power Supplies

Step 5 - Select : One power supply for each chassis

The 1771 power supplies provide 5V dc power directly to the chassis backplane. These power supplies occupy one or two slots in a 1771 chassis and can provide up to 8 amps per supply to the I/O chassis. These power supplies require no space outside the chassis (except for 1771-P7P). The 1771 power supplies connect directly to the chassis backplane and can be paralleled to provide greater current. Redundancy is available for greater availability.

Cat. No.

Nominal Input Voltage 120V ac or 220/240V ac 120V ac 24V dc 24V dc (has selectable power-loss delay) 100V ac 200V ac 120V ac 220V ac 220V ac 120V ac or 220V ac 120V ac or 220V ac

Input Voltage Range 105-125V ac 205-250V ac 97-132V ac 20.5-30V dc 20.5-30V dc

Max. Real Input Power 20W

Max. Apparent Input Power 37VA

Max. Transformer Load 50VA

User Output Current 300mA @ +5V dc +150mA @ +15V dc -150mA @ 15V dc none none none

Backplane Output Current N/A

Frequency

Location, No. of Slots Stand-alone

1770-P1

50-440 Hz

1771-P4S 1771-P5 1771-P5E

59W 57W 57W

89VA N/A N/A

148VA N/A N/A

8A @ +5V dc 8A @ +5V dc 8A @ +5V dc

47-63 Hz dc/Rect sine dc/Rect sine

1771 Chassis, 1 slot 1771 Chassis, 2 slots 1771 Chassis, 2 slots

1771-P4S1 1771-P6S1 1771-P4R 1771-P6R 1771-P6S 1771-P7 1771-PS7

85-120V ac 170-240V ac 97-132V ac 194-264V ac 194-264V ac 97-132V ac 195-264V ac 97-132V ac 195-264V ac

56W 56W 59W 59W 56W 108W 171W

89VA 89VA 92VA 92VA 89VA 176VA 257VA

140VA 140VA 148VA 148VA 140VA 270VA 427VA

none none none none none none 8A @ 5V dc 2A @ 15V dc 2A @ -15V dc 2.5A @ 24V dc none

8A @ +5V dc 8A @ +5V dc 8A @ +5V dc 8A @ +5V dc 8A @ +5V dc 16A @ +5V dc 16A @ +5V dc (total output power including user is 100W max) 8A @ +5V dc

47-63 Hz 47-63 Hz 47-63 Hz 47-63 Hz 47-63 Hz 47-63 Hz 47-63 Hz

1771 Chassis, 1 slot 1771 Chassis, 1 slot 1771 Chassis, 1 slot 1771 Chassis, 1 slot 1771 Chassis, 1 slot Stand-alone Stand-alone

1771-P10

125V dc

97-145V dc

51W

N/A

N/A

dc/Rect sine

1771 chassis, 2 slots

For more information, see the 1771 I/O Chassis and Power Supplies Product Data, publication 1771-2.185.

Publication 1785-SG001A-EN-P - March 2004

40

Selecting Power Supplies

Power Requirements and Transformer Sizing

Each ac input power supply generates a shutdown signal on the backplane whenever the ac line voltage drops below its lower voltage limit. It removes the shutdown signal when the line voltage comes back up to the lower voltage limit. This shutdown is necessary to help ensure that only valid data is stored in memory. The external transformer rating (in VA) of each power supply is greater than its real input power (in watts) because a capacitor-input ac/dc supply draws power only from the peak of the ac voltage wave form. If the transformer is too small, it clips the peak of the sine wave, when the voltage is still above the lower voltage limit, the power supply will sense this clipped wave form as low voltage and could prematurely shut down modules in the chassis. The following graphs display the backplane power load on the vertical axis. Since these supplies have multiple outputs, the backplane power load is given in watts. Use the real power value in watts for determining the amount of heat dissipation you will have inside the enclosure Use the apparent power value in VA for estimating power distribution sizing Use the transformer load value in VA of each power supply plus all other loads on a transformer to determine the required transformer size

Power Load and Transformer Sizing


1771-P4S, -P6S, -P4S1, -P6S1 ac/dc

Backplane Current Load (Amps)

8 6 4 2 0 0 15 30 45 60

8 6 4 2 0 0 25 50 75 100

8 6 4 2 0 0 40 80 120 160

Real Power (Watts)

Apparent Power (VA)

Transformer Load (VA) = Real Power (Watts) x 2.5

1771-P4R, -P6R ac/dc 1 Unit

Backplane Current Load (Amps)

8 6 4 2 0 0 15 30 45 60

8 6 4 2 0 0 25 50 75 100

8 6 4 2 0 0 40 80 120 160

Real Power (Watts)

Apparent Power (VA)

Transformer Load (VA) = Real Power (Watts) x 2.5


8 6 4 2 0

1771-P4R, -P6R ac/dc 2 Units

Backplane Current Load (Amps)

8 6 4 2 0 0 15 30 45 60

8 6 4 2 0 0 25 50 75 100

40

80

120

160

Real Power (Watts)

Apparent Power (VA)

Transformer Load (VA) = Real Power (Watts) x 2.5

Publication 1785-SG001A-EN-P - March 2004

Selecting Power Supplies

41

1771-P4R, -P6R

ac/dc
3 Units

Backplane Current Load (Amps)

16 12 8 4 0 0 35 70 105 140

16 12 8 4 0 0 50 100 150 200

16 12 8 4 0 0 75 150 225 300

Real Power (Watts)

Apparent Power (VA)

Transformer Load (VA) = Real Power (Watts) x 2.5


24 18 12 6 0

1771-P4R, -P6R ac/dc 4 Units

Backplane Current Load (Amps)

24 18 12 6 0 0 50 100 150 200

24 18 12 6 0 0 70 140 210 280

110

220

330

440

Real Power (Watts)

Apparent Power (VA)

Transformer Load (VA) = Real Power (Watts) x 2.5

1771-P5, -P5E dc/dc

Backplane Current Load (Amps)

8 6 4 2 0 0 15 30 45 60

Real Power (Watts)

1771-P7 ac/dc

Backplane Current Load (Amps)

16 12 8 4 0 0 30 60 90 120

16 12 8 4 0 0 45 90 135 180

16 12 8 4 0 0 75 150 225 300

Real Power (Watts)

Apparent Power (VA)

Transformer Load (VA) = Real Power (Watts) x 2.5

1771-PS7 ac/dc

Backplane Current Load (Amps)

16 12 8 4 0 0 50 100 150 200

16 12 8 4 0 0 75 150 225 300

16 12 8 4 0 0 105 210 315 420

Real Power (Watts)

Apparent Power (VA)

Transformer Load (VA) = Real Power (Watts) x 2.5

1771-P10 dc/dc

Backplane Current Load (Amps)

8 6 4 2 0 0 15 30 45 60

Real Power (Watts)

Publication 1785-SG001A-EN-P - March 2004

42

Selecting Power Supplies

Notes

Publication 1785-SG001A-EN-P - March 2004

Selecting Software

43

Step 6 - Select: RSLogix 5 Programming Software RSLinx Software RSNetWorx Network Configuration Software RSLogix Emulate 5 Emulation Software PLC-5 Controller and Training Software ViewAnyWare Products

Selecting Software

Your selection of communication modules and network configuration determines what software packages you need to configure and program your system. The PLC-5 controllers support multiple industry-standard programming languages. You can program in structured text, function block, sequential function charts, or ladder logic. This versatility means you can maintain and troubleshoot programs in the same language that you develop them.

To Use a PLC-5 Programmable Controller PLC-5 Programmable Controller on ControlNet 1771-SDN DeviceNet Scanner Module PLC-5 Programmable Controller on Ethernet or 1785 Ethernet Sidecar Module (set the IP address) PLC-5 Programmable Controller on Data Highway or Remote I/O (define the DH+ routing table) PLC-5-based system you want to emulate PLC-5 Programmable Controller using SLC and MicroLogix products PLC-5-based system with SLC and MicroLogix products you want to emulate Operator interface Communication card in a workstation PLC-5 system with an integrated modular approach for system maintenance PLC-5 system with program maintenance across hardware platforms PLC-5 system with pre-installation and startup control system testing

You Need RSLogix 5 software RSLogix 5 with RSNetWorx for ControlNet software RSLogix 5 with RSNetWorx for DeviceNet software

Order this Cat. No. 9234-RL5300END (diskette) or 9234-RL5300ENE (CD) 9234-RWCNTENE (RSLogix 5 plus RSNetWorx for ControlNet) 9234-RWCNTENE (RSLogix 5 plus RSNetWorx for DeviceNet)

RSLinx software (RSLinx Lite and Bootp server come with RSLogix 5 software)

9234-RL5300END (on diskette) or 9234-RL5300ENE (on CD

RSLogix EmulateTM 5 software RSLogix 500TM software

9324-RL350END (RSLogix 5 plus RSLogix Emulate 5) 9234-RLC300END (diskette) or 9234-RLC300ENE (CD) (RSLogix 5 plus RSLogix 500) 9324-RLC350END (RSLogix 5 plus RSLogix Emulate 500) ViewAnyWare products 9234-RL5300END (on diskette) or 9234-RL5300ENE (on CD RSMACC products 9324-RL5700NXENE 9310-TSTNDENE

RSLogix Emulate 500 software RSView32TM software RSLinx software (RSLinx Lite comes with RSLogix 5 software) Rockwell Software Maintenance Automation Control Center (RSMACCTM) software RSLogix 5 Professional software RSTestStandTM software

Publication 1785-SG001A-EN-P - March 2004

44

Selecting Software

Programming Software

Use RSLogix 5 programming software to configure 1771 I/O and communication modules and to program the PLC-5 programmable controller. RSLogix 5 offers relay ladder, structured text, function block diagram, and sequential function chart editors for you to develop application programs.

RSLogix 5 Software Requirements


Description Personal computer Software requirements Minimum Intel Pentium 100 MHz Supported: Microsoft WindowsTM XP Microsoft Windows 2000 Microsoft Windows NTTM version 4.0 with Service Pack 3 or greater Microsoft Windows ME Microsoft Windows 98 64 Mbytes 100 Mbytes (or more, based on application requirements) 256-color VGA graphics adapter, 800 x 600 resolution True Color 1024 x 768 resolution 256 Mbytes
TM

Recommended Intel Pentium III 700 MHz

RAM Hard disk space Video requirements

Publication 1785-SG001A-EN-P - March 2004

Selecting Software

45

RSLinx Sotware

RSLinx software (9355 series) is a communication server package that provides plant-floor device connectivity for a wide variety of applications. RSLinx can support multiple software applications simultaneously communicating to a variety of devices on many different networks. RSLinx provides a user-friendly graphical interface for navigating through your network. Select a device and click to access a variety of integrated configuration and monitoring tools. A complete set of communication drivers is provided for your networking needs, including Allen-Bradley networks.

RSLinx is available in multiple packages to meet the demand for a variety of cost and functionality requirements.

RSLinx System Requirements


Description Personal computer Software requirements Value Intel Pentium 100 MHz (faster processor improves performance) Supported: Microsoft Windows XP Microsoft Windows 2000 Microsoft Windows NT version 4.0 with Service Pack 3 or greater Microsoft Windows ME Microsoft Windows 98 32 Mbytes minimum 64 Mbytes recommended 35 Mbytes (or more, based on application requirements) 16-color VGA graphics display, 800 x 600 or greater resolution

RAM Hard disk space Video requirements

In most cases, RSLinx Lite software comes bundled with controller programming packages.

Publication 1785-SG001A-EN-P - March 2004

46

Selecting Software

Network Configuration Software

RSNetWorx software for ControlNet (9324-CNETL3) and RSNetWorx for DeviceNet (9324-DNETL3) are the configuration and scheduling tools for your ControlNet or DeviceNet networks. RSNetWorx software lets you create a graphical representation of your network configuration and configure the parameters that define your network. RSNetWorx for ControlNet software schedules network components. The software automatically calculates network bandwidth for the entire network, as well as the bandwidth used by each network component. You must have RSNetWorx software to configure and schedule the ControlNet networks in your PLC-5 programmable controller system. RSNetWorx for DeviceNet software configures the DeviceNet I/O devices and creates the scan list. The 1771-SDN DeviceNet scanner module stores the configuration information and scan list.

RSNetWorx System Requirements


Description Personal computer Software requirements ControlNet Intel Pentium or Pentium-compatible Supported: Microsoft Windows XP Microsoft Windows 2000 Terminal Server Microsoft Windows NT version 4.0 with Service Pack 6 or greater Microsoft Windows ME Microsoft Windows 98 32 Mbytes minimum more memory is required for large networks Minimum: 115 Mbytes (includes program files and hardware files) Full support: 168...193 Mbytes (includes program files, online help, tutorial, and hardware files) 16-color VGA graphics adapter, 640 x 480 resolution minimum, 800 x 600 resolution recommended RSLinx Lite 2.4 or later to use RSNetWorx online RSLinx Lite 2.4 or later to use RSNetWorx online RSLinx Lite 2.41 or later to use RSNetWorx online Minimum: 190 Mbytes (includes program files and hardware files) Full support: 230...565 Mbytes (includes program files, online help, tutorial, and hardware files) Minimum: 108 Mbytes (includes program files and hardware files) Full support: 115...125 Mbytes (includes program files, online help, tutorial, and hardware files) DeviceNet EtherNet/IP

RAM

Hard disk space

Video requirements

Other

Publication 1785-SG001A-EN-P - March 2004

Selecting Software

47

RSLogix Emulate 5 Software

RSLogix Emulate 5 (9324-RL5350END) is the software emulation package for the PLC-5 programmable controllers. RSLogix Emulate 5 used in conjunction with RSLogix 5 software lets you run and debug your application code while at your computer. In addition, RSLogix Emulate 5 also lets you test HMI screens, developed in RSView32 for example, without the need to connect to a real controller. By using RSLogix Emulate 5, you can eliminate the cost for dedicated test ware, improve your productivity, and reduce the time to market of your products. RSLogix Emulate 5 gives you enhanced debug capabilities. You can set tracepoint and breakpoint instructions (ladder diagram only) in your application code, use traces, and also vary the execution speed of the emulator. RSLogix Emulate 5 supports all the programming languages (ladder diagram, function block diagram, structured text, and sequential function chart). RSLogix Emulate 5 does not allow control of real I/O.

RSLogix Emulate 5 System Requirements


Description Personal computer Software requirements Value IBM-compatible Intel Pentium II 300 MHz or Celeron 300A (Pentium III 600 MHz recommended) Supported: Microsoft Windows XP with Service Pack 1 or greater Microsoft Windows 2000 with Service Pack 2 or greater Microsoft Windows NT version 4.0 with Service Pack 6A or greater 128 Mbytes minimum 50 Mbytes 16-color VGA graphics display, 800 x 600 or greater resolution

RAM Hard disk space Video requirements

Publication 1785-SG001A-EN-P - March 2004

48

Selecting Software

PLC-5 Controller and Training Software

Rockwell Automation offers several different levels of training for your PLC-5 programmable controller system.While most of these training aids are PLC-5 specific, the lessons and tools also apply to other platforms. instructor-based training computer-based training workstation simulator job aids

Instructor-based Training
The instructor-based courses are best suited for people new to the PLC-5 architecture and for those new to programmable controllers.
Course Number CCPS65 CCP409 CCP504 CCP412 CCP410 CCP411 CCP122 Description SLC 500/PLC-5 Communications PLC-5 Advanced Maintenance & Troubleshooting RSLogix 5/500 PLC-5 Maintenance & Troubleshooting PLC-5 Programming PLC-5 Advanced Programming PLC-5/SLC 500 Fundamentals Using RSLogix

Computer-based Training
The computer-based training programs are designed to provide the essential introductory information needed for using the product. Computer-based training is best used as a resource following an instructor-based course.
Course Title RSTrainer 2000 for RSLinx RSTrainer 2000 for RSLogix 5
TM

Description Detailed instruction of RSLinx and its communication capabilities Teaches ladder-logic development, documentation and troubleshooting using RSLogix 5

Publication 1785-SG001A-EN-P - March 2004

Selecting Software

49

1771 I/O Rack System Workstation


The PLC-5 workstation simulator (ABTTDPLC1) is an engineering support tool that you can integrate into your training and development program. Designed for use with the Universal I/O Simulator, this rugged workstation precisely simulates the mid-size PLC-5, and other programmable controller families. The simulator includes:
PLC-5/40 processor 12-slot I/O chassis Single-slot power supply Digital I/O modules 3 high-density 10-30V DC input modules 3 high-density 10-60V DC output modules Intelligent I/O modules 1 analog input module 1 analog output module 3 empty chassis slots Hard-shell shipping case

Job Aids
Job aids are useful resources to use in your facility after completing instructor-based and computer-based training.
Job Aid ABT-1785-TSJ53 ABT-1785-DRG70 ABT-1785-TSJ22 Description RSLogix 5 Version 4.0 Procedures Guide for PLC-5 Systems PLC-5 Documentation Reference Guide PLC-5 Troubleshooting Guide Using RSLogix 5 Series Software

Publication 1785-SG001A-EN-P - March 2004

50

Selecting Software

ViewAnyWare Products

ViewAnyWare products, together with Logix for control and NetLinx architecture for communication, make up Rockwell Automations Integrated Architecture strategy. The ViewAnyWare strategy combines Rockwell Automations expertise in Allen-Bradley electronic operator interface and industrialized PC hardware with Rockwell Softwares supervisory control software. Current ViewAnyWare products include: RSView Enterprise Series software PanelViewTM Plus operator interface VersaView industrial computers and monitors VersaView CE industrial computer

RSView Enterprise Series Software


RSView Enterprise Series from Rockwell Software is a line of HMI software products designed with a common look, feel and navigation to help speed HMI application development and training time. With RSView Enterprise Series 3.0, you can reference existing Logix data tags. Any changes made to these referenced tags are automatically inherited by RSView. RSView Enterprise Series software includes: RSView Studio lets you create applications in a single design environment. It configures Supervisory Edition, Machine Edition, VersaView CE, and PanelView Plus. It supports editing and reusing projects for improved portability between embedded machine and supervisory HMI systems, saving development time and reducing engineering and training costs. RSView Machine EditionTM (ME) is a machine-level HMI product that supports both open and dedicated operator interface solutions. It provides a consistent operator interface across multiple platforms (including Microsoft Windows CE, Windows 2000/XP, and PanelView Plus solutions), and is ideal for monitoring and controlling individual machines or small processes. RSView Supervisory EditionTM (SE) is an HMI software for supervisory-level monitoring and control applications. It has a distributed and scalable architecture that supports distributed-server/multi-user applications. This highly-scalable architecture can be applied to a stand-alone, one-server/one-user application or to multiple users interfacing with multiple servers.

Publication 1785-SG001A-EN-P - March 2004

Selecting Software

51

The available RSView Enterprise Series products are:


RSView Enterprise Series Product Line RSView Studio Cat. No. 9701-VWSTENE 9701-VWSTMENE 9701-VWMR015AENE RSView Machine Edition 9701-VWMR030AENE 9701-VWMR075AENE 9701-VWSCWAENE 9701-VWSCRAENE 9701-VWSS025AENE 9701-VWSS100EANE RSView Supervisory Edition 9701-VWSS250EANE 9701-VWSS000AENE 9701-VWB025AENE 9701-VWB100AENE 9701-VWB250AENE 9701-VWSB000AENE Description RSView Studio for RSView Enterprise Series RSView Studio for Machine Edition RSView ME Station runtime for Windows 2000, 15 displays RSView ME Station runtime for Windows 2000, 30 displays RSView ME Station runtime for Windows 2000, 75 displays RSView SE client RSView SE view client RSView SE server 25 displays RSView SE server 100 displays RSView SE server 250 displays RSView SE server unlimited display RSView SE station 25 displays RSView SE station 100 displays RSView SE station 250 displays RSView SE station unlimited display

PanelView Plus Operator Interface


PanelView Plus is ideal for applications with a need to monitor, control and display information graphically, allowing operators to quickly understand the status of their application. PanelView Plus is programmed with RSView Studio and has embedded RSView Machine Edition functionality. It combines the best features from the popular Allen-Bradley PanelView Standard and PanelView "e" operator interface products and adds new functionality including: multi-vendor communications trending expressions data logging animation RSView Studio direct browsing of RSLogixTM 5000 addresses

Publication 1785-SG001A-EN-P - March 2004

52

Selecting Software

VersaView Industrial Computers and Monitors


VersaView is a family of industrial computer and monitor solutions, comprised of integrated display computers, workstations, non-display computers and flat panel monitors. VersaView products offer effortless management of changing technology, a rugged but cost-effective design, and easier product configuration. All VersaView products provide the latest industrial solutions available, optimized for visualization, control, information processing, and maintenance application. RSView ME, RSView SE client, and RSView SE server runtimes are installed (separate activation is required).

VersaView CE Industrial Computers


VersaView CE is an open Windows CE terminal with a Windows desktop environment - bringing together features of operator interfaces and industrial computers. It is a high-performance computer with a compact flash drive and integrated RSView Machine Edition runtime (no activation required). Theres no hard disk, no fan and no moving parts which means maximum reliability on the plant floor. Easy to set up and maintain, VersaView CE means an open system thats rugged and economical, offering high functionality in an easy to use package.

MobileView Portable HMI


The MobileViewTM family of portable HMI products lets personnel move around a machine or down a production line throughout the entire plant, resulting in greater worker and plant productivity. The MobileView interfaces let manufacturers have information and machine control wherever it is required. MobileView Machine and MobileView GuardTM terminals are available with RSView Machine Edition running locally, eliminating the need for a server. Or, MobileView terminals act as thin clients to computer applications, such as RSView Supervisory Edition, to easily integrate into new or existing control architectures.

Publication 1785-SG001A-EN-P - March 2004

Summary

53

Summary

Use a spreadsheet to record the amount and type of devices your PLC-5 system needs. For example, this sample system:

ControlNet Network

Panel A Chassis 1

Panel A Chassis 2

Panel A Chassis 3

PanelView

could result in this spreadsheet:


Device 120V ac digital inputs 120V ac digital outputs 24V dc digital inputs 24V dc digital outputs contact digital outputs 4-20mA analog inputs +10V dc analog inputs 4-20mA analog outputs PanelView terminal ControlNet PLC-5 controller PanelView terminal total Number of I/O Points Needed 76 27 40 13 10 6 3 4 na na na Cat. No. 1771-IAD 1771-OD16 1771-IQ 1771-OB 1771-OW16/B 1771-NIS 1771-NOV 1771-OFE2 2711 Series 1785-L40C15 2711 Series I/O Points per Module 16 16 8 8 16 8 8 4 na na na Number of Modules 5 2 5 2 1 1 1 1 na na na 18

Publication 1785-SG001A-EN-P - March 2004

54

Summary

As you select devices for your PLC-5 system, keep in mind the sections/steps in this selection guide:
Step 1 Select I/O From 1771 I/O Modules 1746 I/O Modules 1794 FLEX I/O Modules 1797 FLEX Ex I/O Modules 1791D CompactBlock I/O Modules Encompass Partner Program I/O Modules EtherNet/IP Protocol ControlNet Network DeviceNet Network Serial Network Data Highway Plus Universal Remote I/O Enhanced PLC-5 Controllers Ethernet PLC-5 Controllers ControlNet PLC-5 Controllers Protected PLC-5 Controllers EEPROM Memory Modules Replacement Batteries

Networks

Controllers

Chassis

chassis with the number of slots you need chassis that meet your power supply requirements chassis that meet your panel size and space limitations one power supply for each chassis RSLogix 5 Programming Software RSLinx Software RSNetWorx Network Configuration Software RSLogix Emulate 5 Emulation Software PLC-5 Controller and Training Software ViewAnyWare Products

5 6

Power Supplies Software

As you determine placement of the modules you need, use the worksheet on the next page to record your choices. Make a copy of this worksheet for each chassis.

Publication 1785-SG001A-EN-P - March 2004

Summary

55

1
Chassis rack power 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

3 4

8 9 10 11 12 13 14 15 16
Voltage Range: Voltage and Current Backplane Current Load

Catalog Number

Inputs and Outputs

Totals

Publication 1785-SG001A-EN-P - March 2004

Notes

Instruction Set
The PLC-5 controller supports multiple industry-standard programming languages. You can program logic in IEC 1131-based structured text, function block, and these built-in ladder logic instructions:
Instruction Family relay-type timer and counter compare compute Description The bit (relay-type) instructions monitor and control the status of bits. XIC, XIO, OTE, OTL, OTU,IIN, IOT, IDI, IDO The timer and counter instructions control operations based on time or the number of events. TON, TOF, RTO, CTU, CTD, RES The compare instructions compare values by using an expression or a specific compare instruction. CMP, EQU, GEQ, GRT, LEQ, LES, LIM, MEQ, NEQ The compute/math instructions evaluate arithmetic operations using an expression or a specific arithmetic instruction. CPT, ACS, ADD, ASN, ATN, AVE, CLR, COS, DIV, LN, LOG, MUL, NEG, SIN, SQR, SRT, STD, SUB, TAN, XPY The logical instructions perform logical operations on bits. AND, NOT, OR, XOR The conversion instruction convert integer and BCD values or convert radian and degree values. TOD, FRD, DEG, RAD The move instructions modify and move bits. BTD, MOV, MVM The file instructions perform operations on file data and compare file data. FAL, FSC, COP, FLL The diagnostic instructions compare data to help you detect problems. FBC, DDT, DTR Use the shift instructions to modify the location of data within files. BSL, BSR, FFL, FFU, LFL, LFU Sequencer instructions monitor consistent and repeatable operations. SQO, SQI, SQL Program flow instructions change the flow of ladder program execution. MCR, JMP, LBL, FOR, NXT, BRK, JSR, SBR, RET, TND, AFI, ONS, OSR, OSF, SFR, EOT, UIE, UID The process control instruction provides closed-loop control. PID The block-transfer instructions transfer words to or from other devices. BTR, BTW, CIO The message instruction reads or writes a block of data to another station. MSG The ASCII instruction read, write, compare, and convert ASCII strings. ABL, ACB, ACI, ACN, AEX, AHL, AIC, ARD, ARL, ASC, ASR, AWA, AWT

logical conversion bit modify move file diagnostic shift sequencer program control process control block-transfer message ASCII

All PLC-5 programmable controllers listed in this document qualify for the standards illustrated below when product or packaging is marked. See the Product Certification link at www.ab.com/certification for Declarations of Conformity, Certificates and other certification details.

ControlLogix, PLC-5, Rockwell Automation, RSLinx, RSView and VersaView are registered trademarks of Rockwell Automaton, Inc. Compact I/O, CompactBlock I/O, Data Highway Plus, DH+, Encompass, FLEX Ex, FLEX I/O, MicroLogix, PanelBuilder, PanelView, PanelView Plus, RSLinx Gateway, RSGuardian, RSLogix, RSLogix 5, RSLogix 500, RSLogix 5000, RSLogix Emulate, RSNetWorx, RSNetWorx for ControlNet, RSTestStand, RSTrainer, RSView Machine Edition, RSView Supervisory Edition, SLC 500 and ViewAnyWare are trademarks of Rockwell Automation, Inc. ControlNet is a trademark of ControlNet International. DeviceNet is a trademark of the Open DeviceNet Vendor Association. EtherNet and EtherNet/IP are trademarks of Digital Equipment Corporation, Intel and Xerox. Microsoft is a registered trademark of Microsoft Corporation. Modbus and Modbus Plus are trademarks of Modicon. PROFIBUS DP is a trademark of PROFIBUS Trade Organization. Pentium is a registered trademark of Intel. Windows and Windows NT are trademarks of Microsoft Corporation.

Publication 1785-SG001A-EN-P - March 2004 64


Supersedes Publication 1785-SO036C-EN-P - April 2002

PN 957867-16
Copyright 2004 Rockwell Automation. All rights reserved. Printed in the U.S.A.

You might also like