Surveying The Stars: Insert TCP 5e Chapter 15 Opener

Chapter 15 Surveying the Stars
Insert TCP 5e Chapter 15 Opener
15.1 Properties of Stars

Our goals for learning: How do we measure stellar luminosities? How do we measure stellar temperatures? How do we measure stellar masses?
How do we measure stellar luminosities?
The brightness of a star depends on both distance and luminosity.
Luminosity: Amount of power a star radiates (energy per second = watts)
Apparent brightness: Amount of starlight that reaches Earth (energy per second per square meter)
Thought Question
These two stars have about the same luminosity -- which one appears brighter?
A. Alpha Centauri B. The Sun
Luminosity passing through each sphere is the same. Apparent brightness decreases with distance. Area of sphere: 4 (radius)2
Divide luminosity by area to get brightness.
The relationship between apparent brightness and luminosity depends on distance: Brightness = Luminosity 4 (distance)2
We can determine a stars luminosity if we can measure its distance and apparent brightness: Luminosity = 4 (distance)2 x (Brightness)
Thought Question
How would the apparent brightness of Alpha Centauri change if it were three times farther away?
A. B. C. D. It would be only 1/3 as bright It would be only 1/6 as bright It would be only 1/9 as bright It would be three times brighter
So how far away are these stars?
Parallax is the apparent shift in position of a nearby object against a background of more distant objects.
Apparent positions of nearest stars shift by about an arcsecond as Earth orbits Sun.
Parallax angle depends on distance.
Parallax is measured by comparing snapshots taken at different times and measuring the shift in angle to star.
Parallax and Distance

p = parallax angle 1 d (in parsecs) = p (in arcseconds) 1 d (in light - years) = 3.26 p (in arcseconds)
The most luminous stars: 106 LSun Least luminous stars: 10-4 LSun (LSun is luminosity of Sun)
The Magnitude Scale

m = apparent magnitude , M = absolute magnitude
apparent brightness of Star 1 1/ 5 m1 m 2 = (100 ) apparent brightness of Star 2 luminosity of Star 1 = (1001/ 5 ) M 1 M 2 luminosity of Star 2
Absolute Magnitude
Defined as the apparent magnitude of a star if it were at a distance of 10 pc (32.6 ly).
How do we measure stellar temperatures?
Every object emits thermal radiation with a spectrum that depends on its temperature.
An object of fixed size grows more luminous as its temperature rises.
Properties of Thermal Radiation

1. Hotter objects emit more light per unit area at all frequencies. 2. Hotter objects emit photons with a higher average energy.
Hottest stars: 50,000 K Coolest stars: 3,000 K (Suns surface is 5,800 K)
106 K 105 K 104 K 103 K 102 K 10 K Ionized Gas (Plasma)
Level of ionization also reveals a stars temperature.
Neutral Gas Molecules
Solid
Absorption lines in stars spectrum tell us ionization level.
Lines in a stars spectrum correspond to a spectral type that reveals its temperature: (Hottest) O B A F G K M (Coolest)
Remembering Spectral Types

(Hottest) O B A F G K M (Coolest) Oh, Be A Fine Girl/Guy, Kiss Me
Only Boys Accepting Feminism Get Kissed Meaningfully Old, Bald, And Fat Generals Keep Mistresses Oh Boy, An F Grade Kills Me Only Brilliant, Artistic Females Generate Killer Mnemonics Oedipus, Basically a Friendly Guy, Knew Mother Obese But Alluring Fertility Goddess, Kiss Me Our Best Answer For Government, Karl Marx
Thought Question Which kind of star is hottest?

A. B. C. D. M star F star A star K star
Pioneers of Stellar Classification

The calculators at Harvard laid the foundation of modern stellar classification.
Williamina Fleming (1857-1911)

Classified stellar spectra according to the strength of hydrogen lines.
Annie Jump Cannon (1863-1941)

Developed the OBAFGKM sequence for classifying stellar spectra.
Cecilia Payne-Gaposchkin (1900-1979)

Explained what the OBAFGKM sequence meant. Showed that the stars were mostly hydrogen.
How do we measure stellar masses?
The orbit of a binary star system depends on strength of gravity.
Types of Binary Star Systems

Visual Binary Eclipsing Binary Spectroscopic Binary
About half of all stars are in binary systems.
Visual Binary
We can directly observe the orbital motions of these stars.
Eclipsing Binary
We can measure periodic eclipses.
Spectroscopic Binary
We determine the orbit by measuring Doppler shifts.
We measure mass using Newtons form of Keplers 3rd Law.
Direct mass measurements are possible only for stars in binary star systems. p2 = 42 G (M1 + M2) a3
p = period a = average separation
Need 2 out of 3 observables to measure mass:

1) Orbital Period (p) 2) Orbital Separation (a or r = radius) 3) Orbital Velocity (v)
v
For circular orbits, v = 2r / p
Most massive stars: 100-150 MSun
Least massive stars: 0.08 MSun
(MSun is the mass of the Sun)
What have we learned?

How do we measure stellar luminosities?
If we measure a stars apparent brightness and distance, we can compute its luminosity with the inverse square law for light (must correct for dust, and gas in path) . Parallax tells us distances to the nearest stars.
How do we measure stellar temperatures?

A stars color and spectral type both reflect its temperature.

How do we measure stellar masses?
Newtons version of Keplers third law tells us the total mass of a binary system, if we can measure the orbital period (p) and average orbital separation of the system (a).
15.2 Patterns Among Stars

Our goals for learning: What is a Hertzsprung-Russell diagram? What is the significance of the main sequence? What are giants, supergiants, and white dwarfs? Why do the properties of some stars vary?
What is a Hertzsprung-Russell diagram?
Luminosity
An H-R diagram plots the luminosity versus the surface temperature of stars.
Temperature
Main Sequence
Most stars fall somewhere on the main sequence of the H-R diagram.
Large radius
Main Sequence
Stars with lower T and higher L than mainsequence stars must have larger radii:
giants and supergiants
Main Sequence
Stars with higher T and lower L than mainsequence stars must have smaller radii:
Small radius
white dwarfs
A stars full classification includes spectral type (line identities) and luminosity class (line shapes, related to the size of the star): I II III IV V - supergiant - bright giant - giant - subgiant - main sequence
Examples: Sun - G2 V Sirius - A1 V Proxima Centauri - M5.5 V Betelgeuse - M2 I
H-R diagram depicts: Temperature

Luminosity
Color Spectral Type Luminosity Radius
Temperature
Luminosity
Which star is the hottest?

A
Temperature
Which star is the most luminous?

Luminosity C
Temperature
Which star is a main-sequence star? D Luminosity
Temperature
Which star has the largest radius?

Luminosity C
Temperature
What is the significance of the main sequence?
Main-sequence stars are fusing hydrogen into helium in their cores like the Sun. Luminous mainsequence stars are hot (blue). Less luminous ones are cooler (yellow or red).
High-mass stars Mass
measurements of mainsequence stars show that the hot, blue stars are much more massive than the cool, red ones.
Low-mass stars
High-mass stars The mass of a
normal, hydrogenburning star determines its luminosity and spectral type!
Low-mass stars
Core pressure and temperature of a highermass star needs to be larger in order to balance gravity.
Higher core temperature boosts fusion rate, leading to larger luminosity.
Stellar Properties Review

Luminosity: from brightness and distance (0.08 MSun) 10-4 LSun - 106 LSun (100 MSun)
Temperature: from color and spectral type (0.08 MSun) 3,000 K - 50,000 K (100 MSun) Mass: from period (p) and average separation (a) of binary-star orbit 0.08 MSun - 100 MSun
Mass & Lifetime

Suns life expectancy: 10 billion years Life expectancy of 10 MSun star:
Until core hydrogen (10% of total) is used up
10 times as much fuel, uses it 104 times as fast 10 million years ~ 10 billion years x 10 / 104 Life expectancy of 0.1 MSun star: 0.1 times as much fuel, uses it 0.01 times as fast 100 billion years ~ 10 billion years x 0.1 / 0.01
Main-Sequence Star Summary

High Mass: High Luminosity Short-Lived Large Radius Blue Low Mass: Low Luminosity Long-Lived Small Radius Red
What are giants, supergiants, and white dwarfs?
Sizes of Giants and Supergiants
Off the Main Sequence

Stellar properties depend on both mass and age: those that have finished fusing H to He in their cores are no longer on the main sequence. All stars become larger and redder after exhausting their core hydrogen: giants and supergiants. Most stars end up small and white after fusion has ceased: white dwarfs.
Which star is most like our Sun? D B
Luminosity
B C
Temperature
D Luminosity
Which of these stars will have changed the least 10 billion years from now? C
B C
Temperature
D Luminosity
Which of these stars can be no more than 10 million years old? A
B C
Temperature
Why do the properties of some stars vary?
Variable Stars
Any star that varies significantly in brightness with time is called a variable star. Some stars vary in brightness because they cannot achieve proper balance between power welling up from the core and power radiated from the surface. Such a star alternately expands and contracts, varying in brightness as it tries to find a balance.
Pulsating Variable Stars
The light curve of this pulsating variable star shows that its brightness alternately rises and falls over a 50-day period.
Cepheid Variable Stars

Most pulsating variable stars inhabit an instability strip on the H-R diagram. The most luminous ones are known as Cepheid variables. Luminosity period relationship used to measure distance.

What is a Hertzsprung-Russell diagram?
An H-R diagram plots stellar luminosity of stars versus surface temperature (or color or spectral type).
What is the significance of the main sequence?

Normal stars that fuse H to He in their cores fall on the main sequence of an H-R diagram A stars mass determines its position along the main sequence (high-mass: luminous and blue; low-mass: faint and red).

What are giants, supergiants, and white dwarfs?
All stars become larger and redder after core hydrogen burning is exhausted: giants and supergiants. Most stars end up as tiny white dwarfs after fusion has ceased.
Why do the properties of some stars vary?

Some stars fail to achieve balance between power generated in the core and power radiated from the surface.
15.3 Star Clusters

Our goals for learning: What are the two types of star clusters? How do we measure the age of a star cluster?
What are the two types of star clusters?
Open cluster: A few thousand loosely packed stars.
Globular cluster: Up to a million or more stars in a dense ball bound together by gravity.
How do we measure the age of a star cluster?
Massive blue stars die first, followed by white, yellow, orange, and red stars.
Pleiades now has no stars with life expectancy less than around 100 million years.
Main-sequence turnoff
Mainsequence turnoff point of a cluster tells us its age.
To determine accurate ages, we compare models of stellar evolution to the cluster data.
Detailed modeling of the oldest globular clusters reveals that they are about 13 billion years old.

What are the two types of star clusters?
Open clusters are loosely packed and contain up to a few thousand stars. Globular clusters are densely packed and contain hundreds of thousands of stars.
How do we measure the age of a star cluster?

A star clusters age roughly equals the life expectancy of its most massive stars still on the main sequence.

Surveying The Stars: Insert TCP 5e Chapter 15 Opener

Uploaded by

Copyright:

Available Formats

Surveying The Stars: Insert TCP 5e Chapter 15 Opener

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Surveying The Stars: Insert TCP 5e Chapter 15 Opener

Uploaded by

Copyright:

Available Formats

Chapter 15 Surveying the Stars

Insert TCP 5e Chapter 15 Opener

15.1 Properties of Stars

How do we measure stellar luminosities?

The brightness of a star depends on both distance and luminosity.

Luminosity: Amount of power a star radiates (energy per second = watts)

Divide luminosity by area to get brightness.

So how far away are these stars?

Parallax angle depends on distance.

Parallax and Distance

The Magnitude Scale

How do we measure stellar temperatures?

An object of fixed size grows more luminous as its temperature rises.

Properties of Thermal Radiation

Hottest stars: 50,000 K Coolest stars: 3,000 K (Suns surface is 5,800 K)

106 K 105 K 104 K 103 K 102 K 10 K Ionized Gas (Plasma)

Level of ionization also reveals a stars temperature.

Neutral Gas Molecules

Absorption lines in stars spectrum tell us ionization level.

Remembering Spectral Types

Thought Question Which kind of star is hottest?

Pioneers of Stellar Classification

Williamina Fleming (1857-1911)

Annie Jump Cannon (1863-1941)

Cecilia Payne-Gaposchkin (1900-1979)

How do we measure stellar masses?

The orbit of a binary star system depends on strength of gravity.

Types of Binary Star Systems

We can directly observe the orbital motions of these stars.

We can measure periodic eclipses.

We determine the orbit by measuring Doppler shifts.

We measure mass using Newtons form of Keplers 3rd Law.

p = period a = average separation

Need 2 out of 3 observables to measure mass:

For circular orbits, v = 2r / p

Most massive stars: 100-150 MSun

Least massive stars: 0.08 MSun

(MSun is the mass of the Sun)

What have we learned?

How do we measure stellar temperatures?

What have we learned?

15.2 Patterns Among Stars

What is a Hertzsprung-Russell diagram?

giants and supergiants

Examples: Sun - G2 V Sirius - A1 V Proxima Centauri - M5.5 V Betelgeuse - M2 I

H-R diagram depicts: Temperature

Color Spectral Type Luminosity Radius

Which star is the hottest?

Which star is the most luminous?

Which star is a main-sequence star? D Luminosity

Which star has the largest radius?

What is the significance of the main sequence?

High-mass stars Mass

High-mass stars The mass of a

normal, hydrogenburning star determines its luminosity and spectral type!

Higher core temperature boosts fusion rate, leading to larger luminosity.

Stellar Properties Review

Mass & Lifetime