HSCCatalog Vickers1

Since 1947
HYDRAULIC SUPPLY COMPANY

2012 STOCK PRODUCTS CATALOG
Tel: (800) 507-9651
Fax: (954) 845-9113
www.hydraulic-supply.com
Catalog SPC-7-2013 $25.00
Contents
Hydraulic Power & Control Category Page Category Page Company Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Stock Products Picture Pages . . . . . . . . . . . . . . . 13 Sales & Ordering Information . . . . . . . . . . . . . . . . 67 Hydraulic Power & Control . . . . . . . . . . . . . . . . . . 83 Hydraulic Pumps & Accessories . . . . . . . . . . . . . . 84 Hydraulic Pumps . . . . . . . . . . . . . . . . . . . . . . . . 84 Foot Brackets . . . . . . . . . . . . . . . . . . . . . . . . . 130 Water Pump Strainers, Skimmers, Foot Valves 131 Hydraulic Motors & Accessories . . . . . . . . . . . . . 132 Hydraulic Motors . . . . . . . . . . . . . . . . . . . . . . . 132 Overhung Load Adapters . . . . . . . . . . . . . . . . 151 Hydrostatic Transmissions . . . . . . . . . . . . . . . . . 152 Hydraulic Cylinders & Accessories . . . . . . . . . . . 157 Steering Units & Accessories . . . . . . . . . . . . . . . 162 Hydraulic Valves & Accessories . . . . . . . . . . . . . 165 Hydraulic Filters & Accessories . . . . . . . . . . . . . 341 Power Units & Accessories. . . . . . . . . . . . . . . . . 361 Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Breathers, Filler-Breathers . . . . . . . . . . . . . . . 375 Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . 381 Pump/Motor & Pump/Engine Mounts . . . . . . . 382 Sight Glasses/Plugs, Magnetic Drain Plugs . . 383 Hydraulic System Accessories . . . . . . . . . . . . . . 385 Accumulators & Accessories . . . . . . . . . . . . . . 385 Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Gauge Accessories (Snubbers, Boots) . . . . . . 391 Geared Flow Dividers . . . . . . . . . . . . . . . . . . . 392 Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . 394 Pressure Switches. . . . . . . . . . . . . . . . . . . . . . 398 Pressure Test Systems . . . . . . . . . . . . . . . . . . 401 High Force Hydraulics - Enerpac . . . . . . . . . . . . 403 High Force Hydraulics - Power Team . . . . . . . . . 406 Pneumatic Power & Control . . . . . . . . . . . . . . . . 629 Pneumatic Cylinders. . . . . . . . . . . . . . . . . . . . . . 630 Pneumatic Valves & Accessories . . . . . . . . . . . . 636 Pneumatic System Accessories . . . . . . . . . . . . . 666 Air Tool Hose Assemblies . . . . . . . . . . . . . . . . 666 Air Line Lubricating Oil . . . . . . . . . . . . . . . . . . 667 Safety Pop-Off Valves . . . . . . . . . . . . . . . . . . . 668 Pneumatic Controls . . . . . . . . . . . . . . . . . . . . . . 669 Fluid Conveying . . . . . . . . . . . . . . . . . . . . . . . . . . 697 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 698 Hose Assemblies . . . . . . . . . . . . . . . . . . . . . . . . 747 Hose Assembly Equipment. . . . . . . . . . . . . . . . . 752 Hose Protection . . . . . . . . . . . . . . . . . . . . . . . . . 755 Hose Fittings (Hydraulic & Special Application) . 761 Hose Fittings (Industrial) . . . . . . . . . . . . . . . . . . . 838 Hose Clamps & Crimp Ferrules . . . . . . . . . . . . . 854 Tubing Products . . . . . . . . . . . . . . . . . . . . . . . . . 868 Air Line Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . 919 Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 928 Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . 934 Flexmaster Pipe & Tube Joints . . . . . . . . . . . . 937 Weld Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . 939 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 940 Quick Disconnects . . . . . . . . . . . . . . . . . . . . . . 1057 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1085 Hose/Tube Cleaning Guns & Projectiles . . . . 1093 Metric & BSP Seals & Washers . . . . . . . . . . . . 1094 Protective Closures. . . . . . . . . . . . . . . . . . . . . . 1095 Split Flange Kits & O-Rings . . . . . . . . . . . . . . . 1097 Support Clamps . . . . . . . . . . . . . . . . . . . . . . . . 1100 Swivel Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . 1110 Air Brake Products . . . . . . . . . . . . . . . . . . . . . . 1113 Performance Products . . . . . . . . . . . . . . . . . . . 1115 Miscellaneous Products . . . . . . . . . . . . . . . . . . 1175 Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1176 Control Cables . . . . . . . . . . . . . . . . . . . . . . . . . 1208 Thread Sealants . . . . . . . . . . . . . . . . . . . . . . . . 1223 Thread Lockers . . . . . . . . . . . . . . . . . . . . . . . . . 1226 Filter Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1227 Petrolatum Tape (Corrosion Protection) . . . . . . 1227 Boeshield T-9 Corrosion Shield . . . . . . . . . . . 1228 Anti-Seize Products . . . . . . . . . . . . . . . . . . . . . 1228 SCRUBS in-a-Bucket Hand Cleaner Towels . 1229 Y Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1229 Splined Billets, Hubs, Reducers . . . . . . . . . . . . 1230 Tire Service Products . . . . . . . . . . . . . . . . . . . . 1230 Hose Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Text Books . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Gloves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1232 Vibrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1232 Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234 Pressure Washer Products . . . . . . . . . . . . . . . . 1235 Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1237 Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . . 1238 CRC Chemical Maintenance Products . . . . . . . 1246 Lubrication Equipment & Accessories . . . . . . . 1249 Indexes & Technical Information . . . . . . . . . . . 1261
Indexes & Technical Information
Miscellaneous Products
Fluid Conveying
Pneumatic Power & Control
This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product
1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com
Company Profile
Core Purpose - Core Values - Goals
Hydraulic Power & Control
Aero Hardware & Supply, Inc. Hydraulic Supply Co. Industrial Global Sales
Core Purpose
To make every experience with our organization a positive one.
Core Values
Honesty, integrity, and ethics in everything we do. Provide the opportunity to grow/advance. Provide an atmosphere of cooperation, friendliness, and mutual respect.
Fluid Conveying
Goals
Continuous Improvement Empower all associates to challenge our processes and make changes that result in value added improvements. Customer Satisfaction Partner with our customers to make every experience a positive one. Employee Satisfaction Associates make the difference. We want you to want to be here. Growth Of Sales Identify customers needs and provide solutions that exceed their expectations to grow our business. Make a Profit Maximize the use of our resources to reduce costs while maintaining a fair gross profit margin. Partnership With Vendors Establish a relationship with our vendors that promotes open and honest communication which results in a win/win situation for all.
Miscellaneous Products Indexes & Technical Information
Company Profile
Complete Fluid Power Service

Since our beginning in 1947, Hydraulic Supply Company has been dedicated to fulfilling customer needs. This dedication to service is what leads us to the wide range of customer services we now offer. Multiple Locations for Local Service Large Hydraulic, Pneumatic and Connector Inventory Hose and Connector Service Hose & Component Kits Control Cable Fabrication Production Hose Shop Production Tube Bending Counter Service for Your Immediate Needs Repair, Test and Machining Services Power Unit and Systems Fabrication Engineering and Technical Support
Hydraulic Supply Company is an Eaton Premier Select Distributor. Pneumatic Power & Control Hydraulic Supply Company combines the buying power and technical expertise of a large company with the flexibility and personal attention of a smaller local company. Were ideally suited to meet all of your hydraulic, pneumatic and connector needs. That is our goal.
Were On-Line!
Visit us online at www.hydraulic-supply.com. Order online, check pricing, quantity on hand, order status, browse our catalog and much more.
Fluid Conveying
continued on next page
Company Profile
Retail
Hydraulic Supply Company currently operates 22 branch stores with retail counter sales in the states of Florida, Georgia and Tennessee. These stores are located in: Atlanta, Augusta, Belle Glade, Chattanooga, Clearwater, Columbus, Daytona Beach, Ft. Lauderdale, Ft. Myers, Homestead, Jacksonville, Lakeland, Miami, Naples, Orlando, Pompano, Savannah, Tampa, and West Palm Beach. Hydraulic Power & Control Pneumatic Power & Control
West Palm Beach, FL Hydraulic Supply operates two different types of branch stores. The first of these are our traditional branch locations.
Each location also offers a range of fabrication services such as hose assemblies of all types: hydraulic, pneumatic, air conditioning, fuel lines, marine power trim lines and industrial hose assemblies. We also fabricate custom control cables and hydraulic tubing assemblies while you wait and can perform pump shaft changes, assemble custom valve assemblies and other fast turnaround services to get you back up and running quickly and economically.
Fluid Conveying Miscellaneous Products
Pompano Beach, FL The other type of store is the Eaton/Aeroquip Express Hose Center. Regardless of store type, each location carries the full line of hydraulic and pneumatic products and services that make Hydraulic Supply Company the place to go for all of your fluid power needs. A typical store stocks approximately 8,500 different part numbers. This number increases as we continue to broaden our offering. Hydraulic Supply Company is committed to carrying all of the products that your company needs to keep it operating smoothly and profitably. But we dont stop at just offering parts.
Friendly and knowledgeable staff are ready to help you with all of your fluid power needs. We offer solutions, not excuses!
Company Profile
Retail (continued)
Eatons Aeroquip Express Hose Center concept puts the products right on the showroom floor in wellmarked, logically arranged locations. This allows you to see everything thats available and make the right choices. Of course, our staff is ready to answer any questions that you may have.
Miami Springs, FL Each of these locations is equipped to perform a variety of work ranging from minor stock changes to major overhauls of hydraulic and pneumatic components and equipment. All of our repair technicians are highly skilled and trained to provide quality repair work and quick turn-around time.
Fluid Conveying
All Counter Sales Associates undergo a rigorous inhouse training program during their first 90 days with the Company. Within one year of date of hire, all Associates are required to have successfully completed the Aeroquip Fluid Conveying Products School and be certified on-site by an Aeroquip representative as a Certified Hose Assembler. Recertifications are done annually and records of all certifications are kept on file in our Human Resources department.
Repair & Service

Hydraulic Supply Co. operates six Service and Repair Centers strategically located throughout the state of Florida to provide virtual statewide coverage to our customers. These centers are located in Belle Glade, Jacksonville, Orlando, Miami Springs, Tampa, and West Palm Beach.
To further insure quality repairs, each and every repair is fully tested before leaving our shops. HSCs testing capabilities are second to none, utilizing the most powerful test stands in the state with capabilities up to 200 horsepower! Leading hydraulic component vendors such as Eaton & Enerpac have inspected our facilities and processes and have certified Hydraulic Supply Co. as their Authorized Repair Centers for the state of Florida.
Company Profile
Outside Sales & Engineering
Hydraulic Supply Company is understandably very proud of our Sales and Engineering Organization. The staff consists of two Regional V.P.s, two full-time Systems Engineers, and eighteen Sales Associates. This group boasts an impressive 327 years of combined fluid power experience thats an average of over 15 years of experience per person. In addition, all of our Sales Associates are required to be Certified Fluid Power Specialists and the majority hold a University degree. We feel that there is no substitute for experience and education when it comes to providing innovative solutions for our customers. At Hydraulic Supply, the goal of our sales force goes far beyond just selling parts. Our approach is simple get to know the customers and their specific needs, analyze the possibilities, and help them design new, better fluid power systems at the most reasonable cost possible. This involves a partnership between Hydraulic Supply and its customers that relies on honesty and open communications. We recognize that providing fast response times and high quality, economical solutions to our customers needs is the only way to build these lasting relationships. The Sales and Engineering Organization works closely with the other departments within our company to insure that this becomes a reality. As well as having Sales Associates with engineering degrees and fluid power backgrounds, Hydraulic Supply Company maintains a staff of two full-time System Design Engineers to help customers design fluid power systems that best meet their requirements. These Engineers are capable of helping with systems from the relatively simple to the extremely complex. One recent project completed by Hydraulic Supply Company for Lockheed Martin involved helping with the design and delivering the vehicle drive system for the service towers used to launch Atlas III rockets from Cape Canaveral. All aspects of the project were handled in-house including a custom hydraulic power unit, drive motors and the logic and electronic control systems. This quadrupleredundant system had to be designed to exacting specifications including explosion-proof components and extreme resistance to corrosion. Even though we have a mature sales force, we continue to provide regular training by utilizing programs from our vendors, including: Technical Fluid Power Courses, Advanced Sales Skills Courses, Integrated Systems Courses, and Fluid Power Components Courses. Hydraulic Supply Companys Sales force is committed to providing unparalleled service and technical expertise to our customers. This commitment to excel is driven by our strong desire to meet our customers requirements, exceed their expectations, and anticipate their future needs. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information

Company Profile
Customer Service
The Customer Service Department of Hydraulic Supply Company is comprised of three teams and two Technical Specialists. The teams are assigned accounts by both geographic region and account type. This allows customers who are calling in to speak with the same group of Service Representatives each time they call and also lets the Representatives get to know their customers on a more personal basis. This gives them a better understanding of the customers individual needs. Each team has dedicated direct phone lines, e-mail and fax numbers. The phone system employed is a sophisticated ACD (Automated Call Distribution) System that allows us to automatically route calls to the next available member of a team, and allows flowing over to another team when extended hold times are encountered. The Customer Service Department is continually monitoring and measuring the quality of the service that they provide to our customers. Like other departments within the company, they utilize the Continuous Improvement Program to monitor and track vital statistics that directly relate to customer satisfaction. Employees are encouraged to challenge our processes and provide solutions that will result in a better overall level of support. At Hydraulic Supply Company, we feel that our Customer Service Department is second to none in the industry yet we know that there is always room for improvement and continually strive toward that end. In keeping with the core values and goals of the company, the primary mission of Customer Service is To make every experience with our Organization a positive one.
Fluid Conveying
Customer Service This department is currently staffed by 15 individuals with 108 years of combined fluid power experience. Among our members we have Certified Fluid Power Specialists, Certified Fluid Power Engineers, Certified Fluid Power Hydraulic Specialists, and Fluid Conveying Product Specialists. All members are Eaton Product Certified. Ongoing training sessions are held regularly by representatives of the various manufacturers that we represent to assure that we are up to date with the latest products. Members also receive regular computer software training to enhance efficiency and customer satisfaction.
Company Profile
Central Distribution Center
The terminal displays the storage location to go to, the part number, description, and the quantity of the item to be picked. Pick Labels are printed by portable printers and are then applied to the items that were picked. Quantity, Part Number, Customer Part Number, and Customer Purchase Order Number are printed in both barcode and human readable form on the label. Hydraulic Power & Control Pneumatic Power & Control
In January of 1997, Hydraulic Supply Co. opened a 40,000 sq. ft. Central Distribution Center (CDC) just west of Ft. Lauderdale in Sunrise, Florida. An expansion of 20,000 sq. ft. was completed in 2009. This facility serves as our Corporate Headquarters, Customer Service Center, and Central Warehouse.
Our shipping stations are divided into small pack, large pack, and retail in order to make the most efficient use of space.
Our CDC utilizes a state-of-the-art paperless, computer controlled, warehouse management system. Warehouse personnel use hand held, radio frequency, barcode terminals/scanners to record the storage of items. Material is put-away in a logical sequence of primary storage locations. Order picking is similar to put-away, with radio frequency terminals directing personnel. To save time and steps, the computer arranges pick tasks in a sequence that uses the most efficient path through the warehouse.
Material is staged awaiting carrier pickup.
ALL ORDERS RECEIVED BY 4:00PM SHIP ON THAT SAME DAY

The volume of materials that flow into and out of our central warehouse as well as the ability to ship orders on the same day that they are received are greatly enhanced by this computer-aided system that is tied directly into out host order processing system.

Company Profile
Central Distribution Center (continued)
The receiving area processes all incoming items and readies them for subsequent put-away.
Hundreds of reels of hose are stored in this area of the warehouse designed specially for this purpose.
Fluid Conveying
Incoming materials are placed on this accumulating conveyor before being stored in selected locations.
HSC maintains an inventory of over $14 million.
Rows and aisles are designated by an alphanumeric code to assist in locating items to be stored/picked.
10
Company Profile
Central Distribution Center (continued)
In addition to serving as a central warehouse, the CDC also houses three additional departments that are involved in manufacturing finished products for our customers. Hydraulic Power & Control Pneumatic Power & Control
Production Tube Bending The CDC also has a Hydraulic Tube Bending Area. Here we can custom form hydraulic tubing assemblies to exacting tolerances and specifications. An electronically controlled tube-bending machine insures accuracy and consistency in a wide variety of tubing sizes and wall thicknesses.
Production Hose Assembly (DCH) The first of these is the Hose Assembly Area (DCH). Here the full range of hydraulic & industrial hoses are assembled from 3/16 diameter through 10 diameter in pressure ranges from vacuum to 10,000 psi. The hose assembly area has full cleaning and pressure testing capabilities to meet the varying needs of our customers. We have the capability to provide high production hose assemblies in a clean, controlled environment. We have multiple high speed crimp machines capable of 1200 crimps per hour. We offer extra value to our customers such as Kitting, Projectile Cleaning, Custom Tagging, Bagging for painting and much more.
Custom Build Area (DCB) The Distribution Center Build Area (DCB) is responsible for assembling and testing custom hydraulic components to customer specifications. Here, technicians can perform anything from a simple shaft change on a hydraulic pump to a complete custom power unit. The majority of work done in DCB is assemblies. Indexes & Technical Information

11
Company Profile
Customer Projects
Hydraulic Supply Company works closely with its customers to deveop unique solutions to their problems. Here are a few types of projects we have been involved with.
Fluid Conveying
12

Pumps - Hyd - Single - Fixed Vane Pumps - Hyd - Single - Fixed Gear Pumps - Hyd - Single Variable - Piston
Miscellaneous Double Gear Pumps Page 118 Vickers V10 Vane Pumps Page 86 Haldex Barnes W900 Series Gear Pumps Page 101 Vickers PVE Piston Pumps Page 109 Pumps - Dump Pumps
Vickers V10F Vane Pumps Page 88
Hydreco 1500K Series Gear Pumps Page 102
Vickers PVQ Piston Pumps Page 110
Permco DM400 Series Dump Pumps Page 120
Vickers V20 Vane Pumps Page 90 Hydreco 1500M Series Gear Pumps Page 103
Eaton Medium Duty Piston Pumps For Mobile Applications Page 112
Fluid Conveying
Vickers V20F Vane Pumps Page 92 Eaton Series 26 Gear Pumps Page 104
Eaton 420 Mobile Piston Pumps Page 114 Pumps - Hyd - Double - Fixed Vane
Permco DMD/DM640 Series Dump Pumps Page 121 Pumps - Refuse Pump System
Vickers 25V Vane Pumps Page 94 Eaton L2 Series Gear Pumps Page 105 Vickers V2010 Double Vane Pumps Page 116 Vickers 25VQ, 35VQ, 45VQ Vane Pumps Page 95 Permco Box Pumps For PTO Applications Page 106 Miscellaneous Single & Tandem Vane Pumps Page 100 Miscellaneous Double Vane Pumps Page 117 Miscellaneous Single Gear Pumps Page 108 Pumps - Hyd - Double - Fixed Gear Vickers VTM-42 Power Steering Pumps Page 123 Pumps - Hand Pumps Permco Versa-Pak Refuse Pump System Page 122 Pumps - Power Steering
13

Doering Series 241 Cartridge Hand Pumps Page 124
Vickers Foot Brackets (Cast Iron) Page 130
Char-Lynn 4000 Series Geroler Motors Page 141
Miscellaneous Gear Motors Page 148 Hydraulic Motors - Vane Vickers 35M Vane Motors Page 149 Hydraulic Motors - Piston
Integrated Hydraulics 1HP7 Series Cartridge Hand Pumps Page 125 Pumps - Air Operated Diaphragm
Foot Valves, Strainers and Skimmers Page 131 Hydraulic Motors - Geroter
Char-Lynn 6000 Series Geroler Motors Page 142
Eaton Medium Duty Piston Motors Page 150 Hydraulic Motors Accessories
Aro 1/4 Inch Diaphragm Pumps Page 126 Char-Lynn H Series Geroter Motors Page 133 Hydraulic Motors - Geroler Aro 1/2 Inch Diaphragm Pumps Page 126 Char-Lynn J Series Geroler Motors Page 135
Char-Lynn 10,000 Series Geroler Motors Page 143 Hydraulic Motors - Gear
Fluid Conveying
Helland Overhung Load Adapters, 4-Bolt for Char-Lynn H & S Series Motors Page 151 Cross 40 Series Gear Motors Page 144 Hydrostatic Transmissions
Aro 1 Inch Diaphragm Pumps Page 127 Pumps - Centrifugal Char-Lynn S Series Geroler Motors Page 136 Hydreco 1500K Series Gear Motors Page 145 Eaton Light Duty Hydrostatic Transmissions Page 152
Hypro 9300C Series Hydraulic Motor Driven Centrifugal Pumps Page 128
Char-Lynn H & S Series Base Block Mounting Kits Page 138
Hydreco 1500M Series Gear Motors Page 146
Eaton Medium Duty Hydrostatic Transmissions Page 153
Char-Lynn 2000 Series Geroler Motors Page 139 Pumps - Accessories
Permco Box Motors Page 147
Eaton Heavy Duty Hydrostatic Pumps Page 154
14

Eaton Heavy Duty Hydrostatic Motors Page 156 Cylinders - Hydraulic
Stauff FBV Series Page 170 Char-Lynn Steering Columns Page 163 Valves - Ball - Stainless Steel
Stauff RV Series Page 176
DMIC CVH Series Page 177 Midway DA Series Page 157 Char-Lynn Steering Wheels & Accessories Page 163 Monarch TL Series Page 157 Valves - Ball - Bronze Vickers C2-8 Series Page 178 Apollo 76-100 Series Page 171 Vickers CV2-20-P Series Page 177
Apollo 76-600 Series Page 171
Georgia Hydraulic Cylinders Page 160
Valves - Check
Fluid Conveying
Vickers C5G & C5GV Series Page 179 Valves - Check - Pilot Operated Stuaff 2BVL Series Page 168 HDM Hydraulics LLC Cylinders Page 161 Strataflo 400 Series Page 173 Apollo 70-600 Series Page 169 Valves - Ball - Steel Deltrol EC Series Page 174 Vickers SPC1-10 Series Page 182 Deltrol CMM/CMMO/CMMQ Series Page 175 Brand PC-50 Series Page 183 Char-Lynn Steering Control Units Page 162 Vickers SPC2-10 Series Page 181 Deltrol C Series Page 173
Steering
Vickers DS8P1 & DT8P1 Series Page 176 Stauff BBVM Series Page 170 Vickers SPC1-16 Series Page 184
15

Vickers DPC1-10 Series Page 186
Integrated Hydraulics 1SE90 Series Page 194
Integrated Hydraulics 1CLLR100 Series Page 201 Valves - Directional Hyd Manual
Walvoil SD11 Series Page 207
Integrated Hydraulics 4CKKT50 Series Page 185 Valves - Counterbalance
Vickers CBV1/2-12 Series Page 195 Vickers MPV1-10 Series Page 202
Brand AO755 Series Page 209
Integrated Hydraulics 1CE20 Series Page 188
Integrated Hydraulics 1CE140 Series Page 196 Vickers DG17V-3 Series Page 203 Valves - Directional Hyd Monoblock Integrated Hydraulics 1CE300 Series Page 197 Valves - Cushion Eaton 30900 Series Page 204 Brand LS755 Series Page 210
Fluid Conveying
Integrated Hydraulics 1CE30 Series Page 189
Integrated Hydraulics 1SE30 Series Page 191
Integrated Hydraulics 1CLLR50 Series Page 198 Walvoil SD4 Series Page 205
Brand SDCF Series Page 211 Valves - Directional Hyd Proportional
Integrated Hydraulics 1SEB30 Series Page 192
Vickers CRV-10 Series Page 199 Walvoil SD5 Series Page 206
Vickers KDG4V-3 & KDG4V-3S Series Page 212
Vickers CBV1-10 Series Page 193 Cross Series RC Page 200 Vickers KFDG4V-3 Series Page 214
16

Valves - Directional Hyd Sectional Vickers DG4S4-01 60 Series Soft Shift D05 Page 275 Valves - Directional Hyd Solenoid - Screw In Cartridge Vickers DG5V-10 Series D10 Page 278 Valves - Flow Control Vickers F(C)G-02/03 Series Page 286
Vickers PFR2-10 Series Page 285
Deltrol F Series Page 279 Vickers Screw-In Cartridge Solenoid Valves - 2 Way, 3 Way, 4 Way, Starting on Page 238 Valves - Directional Hyd Solenoid - Subplate/Manifold Mount Deltrol EF Series Page 280 Vickers FN Series Page 280 Brand FC51 Series Page 287
Husco Model 5000 Page 220
Fluid Conveying
Brand FCR51 Series Page 288 Vickers DG4V-3S / DG4V-3 Series D03 Page 261
Deltrol PC Series Page 281 Valves - Logic Element Valves
Vickers DG4V-3 Series Soft Shift D03 Page 266 Walvoil SDS150 Series Page 225 Vickers DG4S4-01 60 Series D05 Page 268 Deltrol EPC Series Page 282
Vickers DPS2-20 Series Page 289 Valves - Flow Divider
Husco Model 6000 Page 266
Vickers DG4V4-01 10 Series D05 Page 272
Vickers FCV7-10 Series Page 283
Brand B50 Series Page 290
Vickers DG4V5 20 Series D05 Page 273 Walvoil SD25 Series Page 235 Vickers Circuit Maker PFRR-10 Page 284
Brand B100 Series Page 291
17

Vickers FDC1-10 Series Page 292 Valves - Gate
Anderson Brass 3-Way Side Outlet Page 298
Vickers RV1-10 Series Page 304 Valves - Pressure Relief Direct Differential Poppet Vickers CG2V-6/8 & CG5V-6/8 Series Page 311 Valves - Pressure Relief Guided Piston
Watts GV Series Page 293 Valves - Needle
Anderson Brass 4-Way Bottom Outlet Page 299 Valves - Pressure Reducing
Vickers RV3-10 Series Page 305 Fulflo V Series Page 312 Valves - Sandwich Vickers RV3-16 Series Page 306 Valves - Pressure Relief - Pilot Op Poppet
Deltrol N Series Page 294
Vickers PRV1-10 Series Page 300
Fluid Conveying
Vickers D03 Sandwich Valves Deltrol EN Series Page 295 Vickers PRV2-10 Series Page 301 Vickers RV2-10 Series Page 307 Valves - Pressure Relief - Pilot Op Spool Cross VS Series Page 314 Valves - Selector
Valves - Pressure Relief Direct Ball Marsh N Series Page 296
Brand RL Series Page 302
Vickers RV5-10 Series Page 308
Vickers NV1-10 Series Page 297 Valves - Plug
Valves - Pressure Relief Direct Poppet
Cross SD Series Page 315 Vickers RV5-16 Series Page 309
Anderson Brass 130 Series 2-Way Page 298
Vickers C-175 Series Page 303 Vickers CT Series Page 310
Cross SD5 Series 2-Wheel 4-Wheel Page 316 Valves - Slip-In Cartridge
18

Vickers Slip-In Cartridge Valves Page 318 Valves - Stack
Vickers Valve Mounting Bolt Kits Page 328
Canfield Series 5000 Strain Relief Style Page 333
Daman Parallel Circuit D03 Manifolds Page 337
Canfield Series 5J All-Molded Page 334 Vickers SystemStak Bolt Extender Kits Page 328 Valve Accessories - Cartridge Valve Housings Canfield Series 5000 MINI Page 335 Vickers D03 SystemStak Page 319
Daman Parallel Circuit D03 Cover Plates Page 338
Daman Dual Ported D05 Subplates Page 338
Vickers 2-Way Cartridge Valve Housings Page 329
Fluid Conveying
Vickers D05 SystemStak Page 323 Valves - System Accessories Vickers 3-Way Cartridge Valve Housings Page 330
Valve Accessories Subplates, Manifolds
Daman Parallel Circuit D05 Manifolds Page 338 Hydraulic Filters - Suction Strainers
Brand SHV Shuttle Valves Page 325 Vickers 4-Way Cartridge Valve Housings Page 331 Valve Accessories - Cartridge Valve Coils
Daman Side Ported D03 Subplates Page 336 Stauff Series TFS Page 342
Vickers DSV2-8 Series Shuttle Valves Page 326 Valves - Truck Valves
Daman Dual Ported D03 Subplates Page 336
Stauff Series TMF Page 342 Vickers Cartridge Valve Coils Page 332 Truck Valves Page 327 Valve Accessories - Bolt Kits & Extenders Valve Accessories - Solenoid Connectors Vickers Bottom Ported D03 Subplates Page 337 Hydraulic Filters - Suction / Return
19

Stauff SAF07/11 Series Page 343
Stauff RIF48 Series Page 351
Internormen HP Series Pressure Filter Page 358 Hydraulic Filters - Filter Carts
Barnes GC8000 Series (Single Acting Cylinder Applications) Page 364
Stauff SSF-120/160 Series Page 344
Stauff RTF40 Series Page 352 Vickers Clean Cart Page 359 Hydraulic Filters Accessories
Barnes GC8001 Series (Double Acting Cylinder Applications) Page 365
Fluid Conveying
Stauff SSF-24/25 Series Page 346 Hydraulic Filters - Return Vickers HF4RT Series Page 354 Stauff Fluid Analysis Service Kits Page 360
Barnes GC8000 Series Kits Page 366
Barnes GC8001 Series Kits Page 367 Vickers OFRS-25 Series Page 348 Internormen TEF Series Return Filter Page 355 Hydraulic Filters - Pressure Power Units
Vickers OFRS-60 Series Page 349
Barnes GC8000 Series (Without Control Valves) Page 363
Barnes GC9000 Series Basic Power Units (Without Control Valves) Page 368
Vickers HF2P Series Page 356 Barnes GC9000 Series Kits Page 369
Vickers HS22 Series Page 350 Stauff SF Series Pressure Filters Page 357
Barnes GC8000 Series (Single Acting Cylinder Applications) Page 363
20

Power Unit Accessories Sight Glasses, Plugs Plain Case - Bottom Connection Page 388 Barnes HE2000 Series Kits Page 371 Vickers DIRT-Gate Breather Elements Page 378 Sight Glasses (Reservoir Mounting) Page 383 Plain Case - Center Back Connection Page 389
Barnes 12VDC Motor & Pump Assemblies Page 373
Vickers H20-Gate Breather Elements Page 379
Sight Plugs Page 384
Deltrol GS20S Gauge Snubber Page 391
Vickers Reservoir Adaptors Page 380 Power Unit Accessories Flexible Couplings Eaton Vickers Standard Power Units (Non-Stock) Page 374 Power Unit Accessories Breathers & Filler Breathers Maurey Hi-Q Coupling Spiders Page 381
Magnetic Drain Plugs Page 384 System Accessories Accumulators Stauff Gauge Boots Page 391 System Accessories - Geared Flow Dividers
Fluid Conveying
Accumulators Inc Type S3 Page 385 Breathers Page 375
Delta Power 2-Section Page 392
Maurey Hi-Q Coupling Halves Page 381
Filler-Breathers Page 376
Accumulators Inc Charging Assemblies Page 386
Barnes 2-Section With Differential Pressure Relief Valves Page 393
Vickers Mobile Gate Breathers & Filler Breathers Page 377 Power Unit Accessories Reservoir Vent Filters & Adapters
Power Unit Accessories Pump/Motor & Pump/Engine Mounts
System Accessories - Flow Meters
System Accessories - Heat Exchangers
Magnaloy Horizontal Pump/Motor Mounts (For AC Motors) Page 382
Hedland Flow Meters Page 387 System Accessories - Gauges
Thermal Transfer M & MR Series Page 394
21

Thermal Transfer DH & DHR Series Page 395 Stauff Test Page 402 Enerpac High Force Hydraulics
RLS Series Low Profile Single-Acting Cylinders Page 407
P Series Two-Speed Single/Double Acting Hand Pumps Page 414
RSS Series Shorty Single/Double-Acting Cylinders Page 408
PA6 Series Air-Driven Single Speed Pumps Page 415
Thermal Transfer MF Series Page 396 Single-Acting Cylinder & Pump Sets Page 403 RH Series Center Hole Single-Acting Cylinders Page 409 Thermal Transfer EK Series Page 397 System Accessories Pressure Switches High Pressure Rubber Hydraulic Hoses Page 403 RD Series Double-Acting Cylinders Page 410 High-Flow Coupler Page 404 PA17 Series Air-Driven Single Speed Pumps Page 415
Fluid Conveying
PE17 Series Single-Phase 2-Speed Pumps Page 416
Delta Power PS-3000 Series Page 398
Regular Spee-D-Coupler Page 404 Barksdale C9612 Series Page 399
Hydraulic Spreaders Page 410 PE46 Series Single-Phase 2-Speed Pumps Page 417
Regular Coupler Page 405 Pump-Mounted Manual Valves Page 411
Magnaloy PS-400 Series Page 400 System Accessories - Voss Pressure Test
Gauge Adaptors Page 405 Power Team High Force Hydraulics P Series Single-Speed Single-Acting Hand Pumps Page 412
Voss Gauge Couplings Page 401 System Accessories - Stauff Pressure Test C Series General Purpose Single-Acting Cylinders Page 406 P Series Two-Speed Single Acting Hand Pumps Page 413
22

Hydraulic Hoses Page 421 Portable High Tonnage Jacks Page 427 Model IPS10M 10 Ton Manual Puller Set Page 434
Couplers Page 422 Predator TWSD Series Square Drive Torque Wrenches Page 428
Hydra Grip-O-Matic Pulling System Page 435
Pressure Gauges Page 422 Predator TWLC Series Low Clearance Torque Wrenches Page 429
Hydraulic Fluid Page 423 PE55TWP Series Single-Phase 2-Speed Torque Wrench Pumps Page 429
Model IPS17H 17-1/2 Ton Hydraulic Puller Set Page 436
Fluid Conveying
Manifolds - Remote & Pump Mounted Page 424 Wrenches & Pry Bars Page 431
Model IPS30H 30 Ton Hydraulic Puller Set Page 436
Fittings - 10,000 PSI Page 424 Mechanical Jaw Pullers Page 432
In-Line Valves - 10,000 PSI Page 425 Mechanical Push Pullers Page 433 Service Tools Page 425
Model IPS3017 17-1/2 & 30 Ton Manual & Hydraulic Puller Set Page 437
Post Tension & Stressing Jacks Page 426
Model IPS10B 10 Ton Manual Puller Set Page 434
23

Cylinders - Pneumatic
American Cylinder DV Series Page 630
Allied Witan Heavy Duty Metal Mufflers Page 652 Aro E Series Page 640 Aro Alpha Series 4-Way Page 645 Aro Adjustable Speed Controls Page 652
Aro Silverair Series Page 632 Numatics L2 Series 4-Way Page 641 Valves - Pneu Directional Pilot Numatics L2 Series 4-Way Page 646 Allied Witan Porous Metal Mufflers with Adjustable Speed Control Page 653 Air Line FRL's - Aro Aro-Flo Series
American Cylinder DVS Series Page 634
Aro Economair Series Page 635 Valves - Pneu Ball Valves Aro Alpha Series Page 642 Valves - Pneu Directional Solenoid
Aro MaxAir Series 4-Way Page 647 Valves - Drain Cocks
Fluid Conveying
External Seat Drain Cocks Page 649 Bonomi 383N - 383M Series Page 637 Valves - Pneu Directional Manual
Air Line Filter/Regulator/Lubricator Combination Units Page 656
Aro CAT Series 3-Way Page 643 Valves - Pneu Flow Control Air Line Filters Page 657
Aro 200 Series Page 638 Numatics 92280 Series 4-Way Page 644
Aro 119300 Series Page 650 Air Line Regulators Page 658
Aro 460 Series Page 638
Numatics L01 Series 4-Way Page 644
Aro 104104-F Series Page 651 Pneu Valve Accessories
Aro 50 Series Page 639 Allied Witan Porous Metal Mufflers Page 652
Air Line Piggyback Filter/Regulators Page 659
24

Air Line Lubricators Page 660 Air Line FRL's - Aro Module Air 1000 Series
Air Line Lubricators Page 664 Air Line Filters
Mounting Components Page 659 Water Separator 901X Page 665 Air Controls
Air Line FRL's - Numatics FlexiBlok Series
Fluid Conveying
Williams Sectional Dual 3-Way (Modulating) Page 669 Air Line Filters Page 662
Williams Pneumatic Transmission Modulator Page 670
Air Line Regulators Page 663
Air Line Piggyback Filter/Regulators Page 663
25
Fluid Conveying
Hydraulic Hose - Suction Aeroquip GH493 MatchMate Global Page 709 Aeroquip FC619 Page 699 Aeroquip FC500 X-FLEX Page 710 Aeroquip 2661 AQP Page 700 Hydraulic Hose - 1 Wire Aeroquip FC636 EPDM MatchMate Page 711 Synflex 3770 Thermoplastic Twin & Multi-Line Page 716 Industrial Hose - Air & Multi-Purpose Sun-Flow SF-10 Page 724 Synflex 3800 Page 716 Gates Super-Vac Page 723 Industrial Hose - Water Discharge
Aeroquip FRH1AT Page 702
Aeroquip FC254 Page 711 Hydraulic Hose - 4 & 6 Spiral Boston Ultraforce Page 717
Aeroquip GH663 MatchMate Global Page 701
Hydraulic Hose - 6 Spiral HSC Sunrise Page 719
Aeroquip FC300 AQP Page 703
Aeroquip FC606 Page 712 Hydraulic Hose Thermoplastic Boston Marathoner Page 718
Kuriyama Vinylflow EZ-Lite Page 725 Industrial Hose - Water Suction & Discharge
Fluid Conveying
Aeroquip 2651 Page 704 Hydraulic Hose - 2 Wire
Synflex 3130 SAE100R7 Page 712
Boston Easy Couple Page 720
Tigerflex JG Page 726 Marine Hose - Wet Exhaust
Aeroquip FC373 Non-Conductive SAE100R7 Page 713
Aeroquip 2556 SOCKETLESS Page 721 Trident Marine #250 Hardwall EPDM Page 728
Synflex 37AL Non-Conductive Constant Pressure Page 713
Aeroquip FC332 AQP SOCKETLESS Page 721
Synflex 25CT Forklift Sheave SAE100R7 Page 714
Aeroquip FC647 Fire Resistant SOCKETLESS Page 722 Industrial Hose - Petroleum Dispensing
Trident Marine #252 Corrugated Hardwall EPDM Page 728
Aeroquip FC195 AQP Page 708 Synflex 30CT Forklift Sheave SAE100R18 Page 714
Trident Marine #200 Softwall EPDM Page 729
Aeroquip GH195 MatchMate Page 708
Gates Blacksnake Page 722 Aeroquip FC374 SAE100R8 Page 715 Industrial Hose - Petroleum Transfer Trident Marine #202 Silicone VHT Page 729
Aeroquip FC693 EPDM MatchMate Page 709 Hydraulic Hose - 4 Spiral
Synflex 3R80 SAE100R8 Page 715
26
Fluid Conveying
Hose Assemblies - Hydraulic Trident Marine #252V Corrugated Silicone VHT Page 730 Trident Marine #148 Extra Heavy Duty Page 735 Marine Hose - Air & Water Aeroquip 2570 Page 740 Special App Hose - Silicone Aeroquip GH663 1-Wire Page 747
Trident Marine Hump Hose Bellows Page 730
Trident Marine #100 Hardwall Water Page 736
Flexfab FLX5526 Page 741
Aeroquip GH781 2-Wire Page 748
Flexfab FLX5581 Page 741 Special App Hose - LP Gas Trident Marine Elbows Page 731 Marine Hose - Fuel
Aeroquip GH493 4-Spiral Page 749 Hose Assemblies - Industrial
Arrow Clear PVC Hose Type 10 Page 736
Aeroquip FC321 Page 742 Special App Hose - Jack Hose
Contractor's Air Page 750
Trident Marine #365 Barrier Lined Type A1 Page 732
Fluid Conveying
Page 737 Marine Hose - Steering
Aeroquip FC579 Page 743
PVC Water Suction & Discharge Page 750
Aeroquip FC234 Type A1 Page 733 Trident Marine MSH Steering Page 737 Trident Marine #327 Type A2 Page 733 Marine Hose - Bilge, Drain, Live Well Gates 4219 Page 738 Trident Marine #144 Heavy Duty Bilge-Drain-Live Well Page 734 Special App Hose - Fuel Line & Tank Vent
Special App Hose Refrigeration & AC
PVC Lay Flat Page 751 Hose Assembly Equipment
Aeroquip GH134 Multi-Refrigerant Page 743
Boston EH089 ESP Fuel Hose Page 738 Special App Hose - Engine & Air Brake
Aeroquip FC558 (R-134A) Page 744 Special App Hose - Teflon
Aeroquip 222070 Hose Assembly Lube Page 752
Trident Marine #147 Extra Heavy Duty Bilge-Drain-Live Well Page 734 Marine Hose - Sanitation
Aeroquip 2807 Page 744 Aeroquip FC350 AQP Tube Page 739 Everflex STW Page 745
Aeroquip 1582 Reusable Fitting Assembly Mandrels Page 752
Trident Marine #101 Premium Page 735
Aeroquip FC355 AQP Tube & Cover Page 740 Special App Hose - Air Brake Everflex SC Thick Tube Page 746
Aeroquip STC Connector Release Tools Page 752
27
Fluid Conveying
Gates 7277 HBR Hose Bend Restrictors Page 757 Aeroquip ProCrimp 1380 Page 753
PF Female Pipe Swivel Page 764
SB Male Straight Thread O-Ring Swivel Page 767
Aeroquip 222005 Internal Support Coil Page 758
SP Female Straight Pipe Swivel (NPSM) Page 764 SBB Male Straight Thread O-Ring Swivel 90 Elbow Page 767
Aeroquip FT1268 SOCKETLESS Fitting Tool Page 754
Aeroquip HPB Hose Protectors Page 758
FJ Female JIC 37 Swivel Page 764
FR Female ORS Swivel Page 767 Aeroquip FT1356 Hose Cutter Page 754 Aeroquip HSR Hose Spacers Page 758 FJA Female JIC 37 Swivel 45 Elbow Page 765
Fluid Conveying
Aeroquip FT1357 E-Z Clip Clip Closing Tool Page 754 Hose Protection
FRA Female ORS Swivel 45 Elbow Page 768 Aeroquip FC676 Bundling Sleeves Page 759 FJB Female JIC 37 Swivel 90 Elbow Page 765
Aeroquip 900564 Steel Protective Coil Spring Page 755
Aeroquip Hanging Straps Page 759
FRB Female ORS Swivel 90 Short Drop Elbow Page 768
Aeroquip Cinch Straps Page 760 Aeroquip 900952 Plastic Protective Coil Sleeve Page 755 Hose Fittings - Steel - Crimp Aeroquip TTC FJC Female JIC 37 Swivel 90 Long Drop Elbow Page 765
Aeroquip 624 Firesleeve Page 756
MP Male Pipe Page 763
MJ Male JIC 37 Page 766
FRC Female ORS Swivel 90 Long Drop Elbow Page 768
Aeroquip FF9217 Firesleeve Clamp Page 756
PS Male Pipe Swivel Page 763
FS Female SAE 45 Swivel Page 766
MR Male ORS Page 769
Tompkins NHS Nylon Abrasion Sleeve Page 757 PSB Male Pipe Swivel 90 Elbow Page 763
MB Male O-Ring Boss Page 766
MF Male SAE Inverted Flare Swivel Page 769
28
Fluid Conveying
MFA Male SAE Inverted Flare Swivel 45 Elbow Page 769
BFA BSP Female Swivel 45 Elbow Page 771
DSA DKO DIN 3902 Female Swivel, Heavy Duty 45 Elbow Page 774
FJA Female JIC 37 Swivel 45 Elbow Page 777
MFB Male SAE Inverted Flare Swivel 90 Elbow Page 769
BFB BSP Female Swivel Page 772
DSB DKO DIN 3902 Female Swivel, Heavy Duty 90 Elbow Page 775
FJB Female JIC 37 Swivel 90 Elbow Page 778
FL SAE Code 61 Split Flange Page 770
BP BSP Male Parallel Page 772
EK DIN 3902 24 Male, Heavy Duty Page 775
FLA SAE Code 61 Split Flange 45 Elbow Page 770
TE Standpipe Straight Tube Page 772 BJ Metric Banjo Page 775
FJC Female JIC 37 Swivel 90 Long Drop Elbow Page 778
Fluid Conveying
DL DKO DIN 3902 Female Swivel, Light Duty Page 773
JF JIS 30 Female Swivel Page 775
MJ Male JIC 37 Page 778
FLB SAE Code 61 Split Flange 90 Elbow Page 770 DLA DKO DIN 3902 Female Swivel, Light Duty 45 Elbow Page 773 MC Male STC Page 771 KS Komatsu Split Flange Page 776 DLB DKO DIN 3902 Female Swivel, Light Duty 90 Elbow Page 773 KSA Komatsu Split Flange 45 Elbow Page 776 DK DIN 3902 24 Male, Light Duty Page 774 MCB Male STC 90 Elbow Page 771 DS DKO DIN 3902 Female Swivel, Heavy Duty Page 774 BF BSP Female Swivel (1 Hex) Page 771 FJ Female JIC 37 Swivel Page 777 MP Male Pipe Page 777 Hose Fittings - Steel - Crimp Aeroquip TTC12 FRA Female ORS Swivel 45 Elbow Page 779 FR Female ORS Swivel Page 779 KF Komatsu Female Swivel Page 776 MB Male O-Ring Boss Page 778
MCA Male STC 45 Elbow Page 771
FRB Female ORS Swivel 90 Short Drop Elbow Page 779
29
Fluid Conveying
Hose Fittings - Steel - Crimp Aeroquip TTC Spiral
FHB SAE Code 62 Split Flange 90 Elbow Page 782 FRC Female ORS Swivel 90 Long Drop Elbow Page 779 BF BSP Female Swivel (1 Hex) Page 782 MR Male ORS Page 780
FJ Female JIC 37 Swivel Page 785
CTE Caterpillar Split Flange 67-1/2 Elbow Page 787
FJA Female JIC 37 Swivel 45 Elbow Page 785
CTB Caterpillar Split Flange 90 Elbow Page 787
BFA BSP Female Swivel 45 Elbow Page 782 FJB Female JIC 37 Swivel 90 Elbow Page 785
Fluid Conveying
FLF SAE Code 61 Split Flange 30 Elbow Page 780
FLA SAE Code 61 Split Flange Page 788 BFB BSP Female Swivel 90 Elbow Page 782 FH SAE Code 62 Split Flange Page 785
FLA SAE Code 61 Split Flange 45 Elbow Page 780
DL DKO DIN 3902 Female Swivel, Light Duty Page 783
FHA SAE Code 62 Split Flange 45 Elbow Page 786
FLB SAE Code 61 Split Flange 90 Elbow Page 788
FLG SAE Code 61 Split Flange 60 Elbow Page 781
DS DKO DIN 3902 Female Swivel, Heavy Duty Page 783 FHB SAE Code 62 Split Flange 90 Elbow Page 786
FR Female ORS Swivel Page 788
DSA DKO DIN 3902 Female Swivel, Heavy Duty 45 Elbow Page 783 FLB SAE Code 61 Split Flange 90 Elbow Page 781
CT Caterpillar Split Flange Page 786
FRA Female ORS Swivel 45 Elbow Page 788
FH SAE Code 62 Split Flange Page 781
DSB DKO DIN 3902 Female Swivel, Heavy Duty 90 Elbow Page 783
CTD Caterpillar Split Flange 22-1/2 Elbow Page 786
FRB Female ORS Swivel 90 Elbow Page 788
FHA SAE Code 62 Split Flange 45 Elbow Page 781
KF Komatsu Female Swivel Page 784
CTA Caterpillar Split Flange 45 Elbow Page 787
BF BSP Female Swivel (1 Hex) Page 789
30
Fluid Conveying
1SB Global Skive Socket Page 791 BFB BSP Female Swivel 90 Elbow Page 789 Hose Fittings - Steel - Crimp Aeroquip Global OTC 3903 Code 640 Female JIC 37 Swivel 90 Elbow Page 795 FC4098 Female Swivel 90 Elbow Page 798
DS DKO (German) Female Swivel, Heavy Duty Page 789
FJ Female JIC 37 Swivel Page 792 Hose Fittings - Steel - Crimp Aeroquip Polyon Swage
3903 Code 400 Female O-Ring Face Seal Swivel Page 795
FC3443 Flat Crimp Socket Page 798 Hose Fittings - Steel - Crimp Aeroquip Flat Crimp FC363
Hose Fittings - Steel - Crimp Aeroquip Field Crimp
FC5805 Male Pipe Page 793
3903 Code 470 Female O-Ring Face Seal Swivel 90 Elbow Page 795
FJ9121 Male Pipe Page 790
FC5810 Female JIC 37 Swivel Page 793 7903 Code B Female BSP Swivel with O-Ring Page 795
FC1347 Flat Crimp Socket Page 799
Fluid Conveying
FJ9122 Female JIC 37 Swivel Page 790
FJ3383 JIS Female Swivel Page 793 Hose Fittings - Steel - Crimp Synflex Swage 3903/7903 7903 Code V00 Female JIS Female Swivel 60 Female Cone Page 796 Hose Fittings - Steel - Crimp Synflex Swage 390H/790H
Hose Fittings - Steel Reusable - Aeroquip Reduced Bore
412 Male Pipe Page 800
FJ9130/FJ9132 Female JIC 37 Swivel 90 Elbow Page 790 Hose Fittings - Steel - Crimp Aeroquip Global Skive
3903 Code 100 Male Pipe Page 794
4412 Male Pipe Page 800 390H Code 540 Female JIC 37 Swivel Page 797 Hose Fittings - Steel - Crimp Aeroquip Flat Crimp 2807 411 Female JIC 37 Swivel Page 800
3903 Code 140 Male Pipe Swivel Page 794 FJ Female JIC 37 Swivel Page 791 3903 Code 540 Female JIC 37 Swivel Page 794 FJB Female JIC 37 Swivel 90 Elbow Page 791
4411 Female JIC 37 Swivel Page 801
3903 Code 500 Male JIC 37 Page 794 FC8779 Female JIC 37 Swivel Page 798
401 Female SAE 45 Swivel Page 801
1SA Global Skive Socket Page 791 3903 Code 600 Female JIC 37 Swivel 45 Elbow Page 794
31
Fluid Conveying
4414 Male JIC 37 Flare Page 802
4721 Female JIC 37 Swivel Page 807 Hose Fittings - Steel Reusable - Aeroquip 2Wire TTC 190327 SAE Male Inverted Flare 90 Short Elbow Page 810
4402 Male SAE 45 Flare Page 802
190235 SAE Male Inverted Flare Short 90 Elbow Page 804
190000 Lifesaver Page 802
FJ9706 Female ORS Swivel Page 804
FJ7044 ORS Female Swivel Page 811 Hose Fittings - Steel Reusable - Aeroquip Air Brake
FC5988 Female JIC 37 Swivel Page 808 190297/190265/190299 Female 45 Swivel Elbow Page 802 FJ9707 Female ORS Swivel 45 Elbow Page 804
FC5986 Male JIC 37 Flare Page 808 Hose Fittings - Steel Reusable - Aeroquip Polyon
Fluid Conveying
479501 Female USF Swivel Page 812
190296/190261/190302 Female 90 Swivel Elbow Page 803
FJ9708 Female ORS Swivel 90 Elbow Page 805
FJ5100 Female JIC 37 Swivel Page 809 Hose Fittings - Steel Reusable - Aeroquip SOCKETLESS
2038 USF Swivel / Male Pipe Adapter Page 812 Hose Fittings - Steel Reusable - Aeroquip Teflon
07.421 BSP Female Swivel Page 805
190295/190260/190301 Female 90 Swivel Elbow, Long Page 803 FC7662 Male Bump Tube O-Ring Seal 90 Elbow Page 805 Hose Fittings - Steel Reusable - Aeroquip 1Wire TTC 190111 SAE Male Inverted Flare Page 803 FC7988 Female JIC 37 Swivel Page 806 Hose Fittings - Steel Reusable - Aeroquip 2Wire Skive
FJ9068 Male Pipe Swivel Page 810
4775 Code 61 Split Flange Page 803
FC5853 Female NPSM Swivel Page 810
FC5849/FC5847/FC5848 Female Swivel 45 Elbow Page 810
190371 SAE Male Inverted Flare 45 Elbow Page 804
191321/190516/190328 Female 90 Swivel Elbow, Short Page 810
190773/FC9341 Female 45 Swivel Elbow Page 813
32
Fluid Conveying
FJ3052 Male O-Ring (short pilot) Page 821 FJ3288 Female O-Ring (long pilot) 90 Elbow Page 819 FJ5984 Female O-Ring (short pilot) Page 817 191074 Compression Ball Sleeve Page 814 FJ3289 Female O-Ring (long pilot) 90 Elbow With Switch Port (7/16-20) Page 819 FJ3116 Male O-Ring (short pilot) 45 Elbow Page 821
1F40104 Clips Page 817 190772/FC9171 Female Swivel 90 Elbow Page 814
190718 SAE Ball Sleeve Page 814
FJ3053 Female O-Ring (short pilot) With High Side Charge Port (R134a) Page 817
FJ3019 Male O-Ring (short pilot) Page 821
FBM3091 10 mm Banjo Page 814
FJ3162 Female O-Ring (short pilot) With Charge Port (R12) Page 819 FJ3054 Female O-Ring (short pilot) With Low Side Charge Port (R134a) Page 817
Fluid Conveying
FBM3092 10 mm Banjo 17 Elbow Page 814 FJ3055 Female O-Ring (short pilot) 45 Elbow Page 818 FC9062 SAE Male Inverted Flare Page 815
FJ5994/GA23913 ORS Female Swivel 90 Elbow Page 819
FJ3134 Male O-Ring (short pilot) 90 Elbow With High Side Charge Port (R134a) Page 821
FJ3026 Male MIO (Male Insert O-Ring) Page 820
FJ3057 Female SAE 45 Swivel Page 822
FJ5985 Female O-Ring (short pilot) 90 Elbow Page 818 FJ5995 Splicer With High Side Charge Port (R134a) Page 820
FJ3059 Female SAE 45 Swivel 45 Elbow Page 822
190950 SAE Male Inverted Flare 90 Elbow Page 815
FJ3149 Female SAE 45 Swivel 90 Elbow Page 822 900568 Brass Sleeve Page 815 Hose Fittings - Steel Refrigerant - Aeroquip E-Z Clip FJ3013 Female O-Ring (short pilot) 90 Elbow With High Side Charge Port (R134a) Page 818 FJ5986 Splicer With Low Side Charge Port (R134a) Page 820
FJ3171 Splicer With Charge Port (R12) Page 820
1F40105 Cages Page 816
FJ3133 Female SAE 45 Swivel x 90 Elbow With High Side Charge Port (R134a) Page 822
FJ3012 Female O-Ring (short pilot) 90 Elbow With Low Side Charge Port (R134a) Page 818
FJ3045 Splicer Page 821
33
Fluid Conveying
FJ3225 Female RotaLok 90 Elbow Page 823
Synflex 390A Code 540 Swage Female JIC 37 Swivel Page 825
PT45 SAE Male Inverted Flare Page 827
FBM1140 Female JIC 37 Swivel 45 Elbow Page 830
FF12262 Lifesaver Page 823
Aeroquip FC8779SS PTFE Crimp Female JIC 37 Swivel Page 825 PT90 SAE Male Inverted Flare Page 828 Aeroquip FC3443C/FC3596C PTFE Crimp Socket Page 825 FBM1150 Female JIC 37 Swivel 90 Elbow Page 830
FF13727 Aluminum Lifesaver Kit Page 823
NC Crimp Socket Page 828 Hose Fittings - Stainless Steel - Reusable - Misc
900568C Stainless Steel Sleeve Page 830 Hose Fittings - Brass - Crimp Aeroquip Polyon
FT1357 Clip Closing Tool Page 823
Fluid Conveying
Aeroquip FC1349C PTFE Crimp Male Pipe Page 826
Aeroquip 4411SS Female JIC 37 Swivel Page 829
FJ3337 Female JIC 37 Swivel Page 831 Hose Fittings - Brass - Crimp Trident Marine Steering
FT1356 Hose Cutter Page 824 Aeroquip FC1347C PTFE Crimp Socket Page 826 Core Tools / Schraeder Valves Page 824 Hose Fittings - Stainless Steel - Crimp - Everswage
Aeroquip 4721SS Female JIC 37 Swivel Page 829 Trident Marine 108MS Female SAE 45 Swivel Page 832 SSP H80250 Female JIC 37 Swivel Page 829
1F40106 Nipple O-Rings Page 824 NM Male Pipe Page 827
Trident Marine 1TFMS SeaStar Female Swivel Page 832 SSP H80220 Male Pipe Page 829 Hose Fittings - Brass Reusable - Aeroquip Reduced Bore
NJIC Female JIC 37 Swivel Page 827 Hose Fittings - Stainless Steel - Reusable - Aeroquip Teflon
FF12139 E-Z Clip System Tool Case Page 824 Hose Fittings - Stainless Steel - Crimp - Misc
NJ JIC Female Insert Page 827
412B Male Pipe Page 833
PT SAE Male Inverted Flare Page 827 Aeroquip FJSS Global TTC Female JIC 37 Swivel Page 825
190600C Female JIC 37 Swivel Page 830
411B Female JIC 37 Swivel Page 833
401B Female SAE 45 Swivel Page 833
34
Fluid Conveying
Hose Fittings - Brass Reusable - Aeroquip SOCKETLESS 178 Hose Splicer Page 841
208MS Female SAE 45 Swivel Page 837
ABM Male Pin Lug Coupling Page 846 Industrial Hose Fittings - Cam & Groove - Aluminum
2TFMS SeaStar Female Swivel Page 837 Industrial Hose Fittings Shank Type - Brass
179 Hose Tee Page 841
4753 Female Pipe Page 834
BST Male Pipe Combination Nipple Page 842 4797 Female JIC 37 and SAE 45 Swivel Page 834 102 Male Pipe Page 839 Industrial Hose Fittings Shank Type - Steel
C Female Coupler / Hose Shank Page 847
E Male Adapter / Hose Shank Page 848
A29E Male Pipe 90 Elbow Page 840
ST/STC/STN Male Pipe Combination Nipple Page 843
A Male Adapter / Female NPT Page 848
Fluid Conveying
104 Female Pipe (Rigid) Page 840
Male Pipe Steel Nipple Page 843 F Male Adapter / Male NPT Page 848 Hose Mender Page 844 Industrial Hose Fittings Shank Type - Stainless Steel
4742 Male SAE 45 Flare Page 835
124 Female Pipe (Swivel) Page 840
4740 SAE 45 Male Inverted Flare Page 835
B Female Coupler / Male NPT Page 848 143/144 Female Flare Swivel Page 840 RST Male Pipe Combination Nipple Page 845
4743 SAE 42 Inverted Female Flare Page 835
590 Male Garden Hose (NPSH Thread) Page 841 MHC Male Pipe Page 845
D Female Coupler / Female NPT Page 849
4772 Hose Mender Page 835
591 Female Garden Hose (NPSH Thread) Page 841
Industrial Hose Fittings Shank Type - Pin Lug Aluminum
Dust Plug Page 849
4750 Compression Type Page 836 Hose Fittings - Brass Reusable - Trident Marine Steering
BRGHT Heavy Duty Forged Brass Garden Hose Sets (Male & Female) Page 841
ABF Female Pin Lug Coupling Page 846
Dust Cap Page 849
35
Fluid Conveying
Hose Clamps & Crimp Ferrules Gasket Page 849 Industrial Hose Fittings - Cam & Groove - Polypropylene Winzeler Brass Crimp Ferrules Page 867 Tubing
Oetiker Stepless Spring Page 861 Dixon HSS Worm Gear Page 855
A Male Adapter / Female NPT Page 850
Dixon MAH Worm Gear Page 855
Clampco Spring Page 862
Carbon Steel Tubing Page 869
Oetiker 2-Ear Pinch Page 856 B Female Coupler / Male NPT Page 850 Oetiker 2-Ear Pinch Service Kit Page 857 Band-It Jr Pre-Formed Page 864 D Female Coupler / Female NPT Page 851 Industrial Hose Fittings Universal Air Hose Couplings Oetiker Stepless Pinch Page 857 Band-It Band Page 865 Trident Marine All-Stainless Constant-Torque Spring Page 863
Voss Metric Carbon Steel Tubing Page 870
Stainless Steel Tubing Page 871
Fluid Conveying
Mazzer Polyethylene Tubing Page 872
Hose End Page 852
Oetiker Stepless Pinch Service Kit Page 858
Band-It Buckles Page 865
Synflex Eclipse Air Brake Tubing Page 873
Eaton TP Polyamide "Nylon 11" Tubing Page 873 Crimp/Swage Hose End Page 852 Oetiker Pinch Installation Tools Page 858 Dixon F Series Center Punch Clamps Page 865 Arrow PVC Reinforced Standard Duty Tubing Page 874 Dixon TBC T-Bolt Page 859 Dixon Double Bolt Page 866
Female NPT End Page 852
Male NPT End Page 853 Arrow PVC Non-Reinforced Clear Tubing Page 874
Replacement Washer Page 853
Trident Marine 720 All-Stainless T-Bolt Page 860
Kuriyama TigerClamp Spiral Double Bolt Page 866
36
Fluid Conveying
Boston Clearforce-NR PVC Tubing Page 875
Aeroquip FF90103 ORS-TF Sleeve Page 881 Tube Fittings - Steel - ORS Braze Tube Fittings Waltersheid Profile Ring Page 886 103 / 104 Male Stud Coupling, BSP Taper Page 889
Boston Clearforce-R PVC Tubing Page 875
Boston ESP Fuel Tubing Page 876
Aeroquip FF9075 ORS Braze Ring Page 882 Tube Fittings - Steel - Eaton 7000 Series Ermeto
111 / 112 Straight Coupling Page 887
105 / 106 Male Stud Coupling, NPT Page 889 Waltersheid Straight Union Page 887
Steel Brake Line Assemblies Page 876 Tube Fittings - Steel - Nuts & Sleeves 109 / 184 Male Stud Coupling Metric Parallel Page 890 119 / 120 Equal Elbow Page 887
7705 Union Tee Page 883 Tube Fittings - Steel - World Wide Flareless
Fluid Conveying
Aeroquip 1290 Flare Nuts Page 878 110 / 184 Male Stud Coupling, BSP Parallel Page 890
Aeroquip 900605 Flare Sleeves Page 878
7105 Nut Page 884
Waltersheid Elbow Union Page 888
7165A Ferrule Page 884 Inverted Flare Nuts Page 878 Tube Fittings - Steel - Versil Flare Nuts & Ferrules Waltersheid Elbow Swivel Connector Page 888 Waltersheid Male Stud Coupling, BSP Parallel Page 890
7505 90 Union Elbow Page 885 Aeroquip FC2875 Versil Flare Tube Nut Page 879 Tube Fittings - Steel - Metric Flareless 133 / 134 Equal Tee Page 888
793 Tube Plug Page 891
Aeroquip FF9605 Versil Flare Tube Ferrule Page 879 Tube Fittings - Steel ORS-TF Tube Fittings Waltersheid Nut Page 886 Waltersheid Equal Tee Page 889
Waltersheid Plug Page 891
1193 Blanking Plug Page 891
37
Fluid Conveying
CP Cap Page 899 Waltersheid Cap Page 892 MEST Male Connector Straight Thread O-Ring 90 Elbow Page 897 P Plug Page 899 U Union Page 897 N Nut Page 900 RU Reducing Union Page 897 FF Front Ferrule Page 900 J-N JIC 37 Flare Nut Page 894 BU Bulkhead Union Page 897 BF Back Ferrule Page 900 J-S JIC 37 Flare Sleeve Page 894 TubeFittings - Stainless Steel - SSP Duolok UE Union Elbow Page 898 FS Ferrule Set Page 900 TubeFittings - Stainless Steel - Metric Flareless MC Male Connector Page 895 MBT Male Branch Tee Page 898 Adaptall SS9201 Tube Nut Page 901
Eaton 100 Inverted Flare Tube Nut Page 902 Tube Fittings - Brass - Eaton Compression
158 Swivel Elbow Page 893 TubeFittings - Stainless Steel - SSP Nuts & Sleeves
2030 Tube Support for Plastic Tubing Page 903
60 Compression Sleeve Page 904
61 Nut Page 904
Fluid Conveying
62 Union Page 904
68 Male Connector Page 904
66 Female Connector Page 905
ME Male Elbow Page 896 MRT Male Run Tee Page 898 FC Female Connector Page 896
Adaptall SS9202 Cutting Ring Page 901 Tube Fittings - Brass - Nuts
69 90 Male Elbow Page 905
UT Union Tee Page 898 FE Female Elbow Page 896 ANU AN Union Page 899
Eaton 41 Flare Nut (Long) Page 902
65 90 Union Elbow Page 905
241 Flare Nut (Long) Page 902
64 Union Tee Page 906
MCST Male Connector Straight Thread O-Ring Page 896
ANA AN Adapter Page 899
Eaton 1110 Flare Nut (Short) Page 902
38
Fluid Conveying
Tube Fittings - Brass - SSP Duolok
72 Male Branch Tee Page 906 Tube Fittings - Brass Compression
1165 Union Elbow Page 915 BMC Bulkhead Male Connector Page 911
AQ71-PS Swivel Male Run Tee Page 918
260 Sleeve Page 907
U Union Page 912
1169 Male Elbow Page 915 AQ72-PS Swivel Male Branch Tee Page 918
261 Nut Page 907 UT Union Tee Page 912 295 Insert Page 907 CP Cap Page 912 268 Male Connector Page 908
1169S Swivel Male Elbow Page 915 AQ86-P Female Bulkhead Union Page 918 Air Line Fittings 1164 Union Tee Page 915
Fluid Conveying
INB100 Union Page 919 266 Female Connector Page 908 Tube Fittings - Brass - Eaton Air Brake-Nylon P Plug Page 912 Tube Fittings - Brass - Eaton Push > Connect 1171S Swivel Male Run Tee Page 916 1162 Union Page 913 INB103 Male Connector Page 919
1460 Sleeve Page 909
1172S Swivel Male Branch Tee Page 916 1461 Nut Page 909 1174 Bulkhead Union Page 913 Tube Fittings - Brass - Alkon Push-In INB106 Union Elbow Page 919
1462 Union Page 910
1107 Union "Y" Page 914
AQ68-P Male Connector Page 917
1468 Male Connector Page 910
1168 Male Connector Page 914 AQ69-PS Swivel Male Elbow Page 917 1166 Female Connector Page 914
INB107 Fixed Elbow Page 920
1469 90 Male Elbow Page 910
39
Fluid Conveying
INB109 Swivel Elbow Page 920
1164M Union Tee Page 923 Tube Fittings - Brass - Air Brake-Nylon - Eaton Quick > Connect
1872S Swivel Male Branch Tee Page 926 Tubing Accessories
Cap Page 929 Piping Products - Pipe Fittings - Malleable Iron
INB110 Union Tee Page 920 1862 Union Page 924
Aeroquip Flaretite Seals Page 927 Piping Products - Pipe Fittings - Brass
Bushing Page 930
Bell Reducer Page 930 INB116 Swivel Run Tee Page 921 1874 Quick Connect Bulkhead Union Page 924 Hex Bushing Page 928 Coupling Page 930 1868 Male Connector Page 925 Coupling Page 928
Fluid Conveying
IN118 Plug Page 921
INB121 Reducer Page 921 1880 45 Male Elbow Page 925 45 Street Elbow Page 928
Union Page 931
INB131 Union Y Page 921 Tube Fittings - Brass - Eaton Metric Push > Connect 1865 90 Union Elbow Page 925 90 Elbow Page 928
45 Street Elbow Page 931
90 Elbow Page 931 1162M Union Page 922 90 Street Elbow Page 928
1869S Swivel 90 Male Elbow Page 926 1168MPT Male Connector (Universal BSPT/BSPP) Page 922 1864 Union Tee Page 926
90 Street Elbow Page 931 Tee Page 928 Tee Page 931
1169MPTS Swivel Male Elbow (Universal BSPT/BSPP) Page 923
Square Head Plug Page 928
40
Fluid Conveying
Cross Page 931
NH1602/NH1652 90 Long Elbow Page 938
Aeroquip FF1854T ORS / SAE O-Ring Boss (Long) Page 942
Aeroquip FF2031T ORS / Male Pipe Page 945
Plug Page 932 Parts Page 938 Cap Page 932 Piping Products - Pipe Fittings - Steel Anchor SAE Half Coupling Page 939 Coupling Page 933 Piping Products - Pipe Nipples Anchor SAE to Socket Weld Couplings Page 939 Adapters - Steel - O-Ring Face Seal Braze Steel - Schedule 40 Page 934 Aeroquip FC1229 ORS-BR Shoulder Internal Braze Page 941 Piping Products - Weld Couplings Aeroquip FF2068T ORS / SAE O-Ring Boss 45 Elbow Page 942
Aeroquip FF2093T ORS / Male Pipe 45 Elbow Page 945
Aeroquip FF2032 ORS / Male Pipe Page 945 Aeroquip FF1868T ORS / SAE O-Ring Boss 90 Elbow Page 943 Adapters - Steel - O-Ring Face Seal To 37 Flare
Fluid Conveying
Aeroquip FF1865T ORS / ORS / SAE O-Ring Boss Tee Page 943
Brennan FS6504 Female ORFS / Male 37 Flare Page 946
Steel - Schedule 80 Page 934
Brennan FS6402 Male ORFS / Female 37 Flare Swivel Page 946
Brass Page 936 Piping Products - Aeroquip Flexmaster Pipe Joints
Aeroquip FF1851 ORS / Braze Adapter Page 941
Aeroquip FF2227T ORS / SAE O-Ring Boss (Long) 90 Elbow Page 943
Brennan FS6403 Male ORFS / Male 37 Flare Page 946 Adapters - Steel - O-Ring Face Seal To O-Ring Face Seal
Aeroquip FC2326 ORS-BR Nut (Plated) Page 941 NH1600/NH1650 Straight Page 937 Adapters - Steel - O-Ring Face Seal To O-Ring Boss
Aeroquip FF1861T ORS / SAE O-Ring Boss / ORS Tee Page 944
Aeroquip FF2000T ORS / ORS Page 947
Adapters - Steel - O-Ring Face Seal To Pipe Aeroquip FF1852T ORS / SAE O-Ring Boss Page 942
Aeroquip FF2281T ORS / ORS Reducer Adapter Page 947
NH1600/NH1650 Long Straight Page 937
41
Fluid Conveying
Aeroquip FF1994T ORS / ORS Bulkhead Adapter Page 947
Aeroquip FF9863 ORS Cap Assembly Page 949 Adapters - Steel - Pipe To Pipe
Aeroquip 2046 Female Pipe Swivel / Female Pipe Page 954 Aeroquip 2252 Male Pipe Swivel / Female Pipe 90 Elbow Page 957
Brennan FS6502 Female ORFS / Male ORFS 45 Elbow Page 947
Aeroquip 2083 Male Pipe / Male Pipe Hex Nipple Page 950
Aeroquip 2096 Female Pipe Coupling Page 954 Aeroquip 2047 Female Pipe Swivel / Male Pipe 90 Elbow Page 957 Aeroquip 2247 Male Pipe / Male Pipe 45 Elbow Page 955
Aeroquip 2084 Male Pipe / Male Pipe Nipple Page 950 Aeroquip FF2098T Female ORS / ORS 90 Elbow Page 948 Aeroquip 2081 Male Pipe / Female Pipe Bushing Page 951
Aeroquip 2048 Female Pipe Swivel / Female Pipe 90 Elbow Page 958 Aeroquip 2049 Female Pipe Swivel / Male Pipe 45 Elbow Page 955
Fluid Conveying
Aeroquip FF2114T Female ORS / ORS / ORS Tee Page 948
Aeroquip 2040 Male Pipe / Female Pipe Page 952 Aeroquip 2050 Female Pipe Swivel / Female Pipe 45 Elbow Page 955 Aeroquip 2082 Male Pipe Plug Page 952
Aeroquip 2087 Female Pipe / Female Pipe 90 Elbow Page 958
Aeroquip FF1898T ORS / ORS / ORS Tee Page 948
Aeroquip 2257 Male Pipe Tee Page 959 Aeroquip 2222 Male Pipe Plug Countersunk Hex Page 953 Aeroquip FF1857T ORS / Female ORS / ORS Tee Page 948 Brennan 5406-C Female Pipe Cap Page 953 Aeroquip 2256 Male Pipe / Female Pipe / Male Pipe Tee Page 959 Aeroquip 2085 Male Pipe / Male Pipe 90 Elbow Page 956 Aeroquip 2088 Female Pipe / Male Pipe 45 Elbow Page 956
Adapters - Steel - O-Ring Face Seal Accessories
Aeroquip 2045 Female Pipe Swivel / Male Pipe Page 953 Aeroquip 2089 Male Pipe / Female Pipe 90 Elbow Page 956
Aeroquip 2093 Male Pipe / Male Pipe / Female Pipe Tee Page 959
Aeroquip FF9767 ORS Plug Page 949
42
Fluid Conveying
Aeroquip 2092 Male Pipe / Female Pipe / Female Pipe Tee Page 959
Aeroquip 2021 Male Pipe / 37 Male Flare Page 962
Aeroquip 2024 Male Pipe / Male 37 Flare 90 Elbow Page 967 Aeroquip 2030 Male Pipe / Male 37 Flare / Male 37 Flare Tee Page 971
Aeroquip 202113 Male Pipe / 37 Male Flare (Long) Page 963 Aeroquip 2254 Female Pipe Swivel / Male Pipe/ Female Pipe Swivel Tee Page 960 Aeroquip 202411 Male Pipe / Male 37 Flare 90 Elbow (Long) Page 969 Aeroquip 2240 Male Pipe / Male 37 Flare Bulkhead Page 964 Aeroquip 202413 Male Pipe / Male 37 Flare 90 Elbow (Longer) Page 969
Brennan 2606 Male JIC 37 Flare / Male JIC 37 Flare / Female Pipe Tee Page 972
Aeroquip 2255 Female Pipe Swivel (NPSM) Tee Page 960
Aeroquip 2239 Female Pipe / Male 37 Flare Bulkhead Page 964
Fluid Conveying
Aeroquip 2091 Male Pipe / Female Pipe / Female Pipe Tee Page 960
Aeroquip 2022 Female Pipe / Male 37 Flare Page 964
Aeroquip 2250 Male Pipe / Female 37 Flare Swivel 90 Elbow Page 969
Aeroquip 2031 Female Pipe / Male 37 Flare / Male 37 Flare Tee Page 972
Aeroquip 2242 Female Pipe / Female 37 Flare Swivel Page 965 Aeroquip 2090 Female Pipe Tee Page 960 Aeroquip 2018 Male Pipe / Female 37 Flare Swivel Page 966
Aeroquip 2249 Male Pipe Swivel / Male 37 Flare 90 Elbow Page 970
Aeroquip 210212 Bulkhead Lock Nut Page 972
Aeroquip 2080 Female Pipe Cross Page 961 Aeroquip 2023 Male Pipe / Male 37 Flare 45 Elbow Page 966
Aeroquip 2025 Female Pipe / Male 37 Flare 90 Elbow Page 970
Adapters - Steel - Pipe To SAE O-Ring
Aeroquip 2246 Male Pipe / Female SAE O-Ring Boss Page 973 Aeroquip 2028 Male Pipe / Male 37 Flare / Male 37 Flare Tee Page 971
Adapters - Steel - Pipe To 37 Flare Aeroquip 2044 Female Pipe / Male 37 Flare 45 Elbow Page 967
Aeroquip 2066 Female Pipe Swivel / Male SAE O-Ring Boss Page 973
43
Fluid Conveying
Aeroquip 2216 Female Pipe / Male SAE O-Ring Boss Page 973
Brennan 4503 Hose Barb / Male Pipe 45 Elbow Page 977
Aeroquip 2070 Female 37 Flare Swivel / Male 37 Flare 45 Elbow Page 981
Aeroquip 2033 Male 37 Flare Tee Page 984
Brennan 6401 Male SAE O-Ring Boss / Male Pipe Page 974
Aeroquip FF1162 Male Pipe / Hose Barb 90 Elbow Page 977 Adapters - Steel - 37 Flare Union
Aeroquip 2039 Male 37 Flare / Male 37 Flare 90 Elbow Page 982
Aeroquip 203002 Male 37 Flare Bulkhead Tee Page 984
Aeroquip 2067 Female Pipe Swivel / Male SAE O-Ring Boss 45 Elbow Page 975
Aeroquip 2027 Male 37 Flare / Male 37 Flare Page 978
Aeroquip 2043 Male 37 Flare / Male 37 Flare Bulkhead Page 982
Aeroquip 203008 Male 37 Flare Bulkhead Tee Page 985
Fluid Conveying
Aeroquip 2068 Female Pipe Swivel / Male SAE O-Ring Boss 90 Elbow Page 975
Aeroquip 2041 Male 37 Flare / Male 37 Flare Bulkhead Page 979
Aeroquip 2071 Female 37 Flare Swivel / Male 37 Flare 90 Elbow Page 982 Aeroquip 203101 Female 37 Flare Swivel / Male 37 Flare / Male 37 Flare Tee Page 985
Aeroquip 206801 Female Pipe / Male SAE O-Ring Boss 90 Elbow Page 975
Aeroquip 2215 Female 37 Flare / Male 37 Flare Page 979 Aeroquip 500454 Female 37 Flare Swivel / Male 37 Flare Bent Tube 90 Page 983 Aeroquip 221501 Female 37 Flare Swivel / Male 37 Flare Page 980
Aeroquip 203102 Female 37 Flare Swivel / Male 37 Flare / Male 37 Flare Tee Page 986
Brennan 6806-NWO Male SAE O-Ring Boss / Male Pipe 90 Elbow Page 976 Adapters - Steel - Pipe To Hose
Adaptall 9026 Female 37 Flare Swivel Union Page 981
Aeroquip FF5163 Female 37 Flare Swivel / Male 37 Flare Bent Tube 90 Page 983 Aeroquip 2020 Male 37 Flare Cross Page 986
Brennan 4404 Hose Barb / Male Pipe Page 977
Aeroquip 2042 Male 37 Flare / Male 37 Flare 45 Bulkhead Elbow Page 981
Aeroquip 504095 Female 37 Flare Swivel / Male 37 Flare Bent Tube 90 Page 984
Aeroquip 210292 37 Flare Cap Page 986
44
Fluid Conveying
Aeroquip 900599 Male 37 Flare Plug Page 987 Adapters - Steel - SAE O-Ring To 37 Flare
Aeroquip 206209 Male SAE O-Ring Boss / Male 37 Flare Long 90 Elbow Page 992
Aeroquip FF5239 Code 61 Split Flange / Male 37 Flare Page 997 Brennan 6807-NWO Male SAE O-Ring Boss Adjustable / Male SAE O-Ring Boss 90 Elbow Page 994 Aeroquip 500023/FF5238 Code 61 Split Flange / Male 37 Flare 45 Elbow Page 997
Aeroquip 202702 Male SAE O-Ring Boss / Male 37 Flare Page 988
Brennan 6809-NWO Male SAE O-Ring Boss / Female 37 Flare Swivel 90 Elbow Page 993
Aeroquip FF1010 Male SAE O-Ring Boss / Female SAE O-Ring Boss Page 994
Aeroquip 202713 Male SAE O-Ring Boss / Male 37 Flare (Long) Page 989 Aeroquip 203005 Male SAE O-Ring Boss / Male 37 Flare / Male 37 Flare Tee Page 993 Aeroquip 2266 Male SAE O-Ring Boss / Female 37 Flare Swivel Page 990
Aeroquip 900598 Male SAE O-Ring Boss Plug Page 995
Aeroquip 500024 Code 61 Split Flange / Male 37 Flare 90 Elbow Page 997
Fluid Conveying
Aeroquip FF2138 Male SAE O-Ring Boss Plug Hex Socket Page 995 Adapters - Steel - SAE O-Ring To Hose
Aeroquip FF5162 Code 61 Split Flange / Male 37 Flare 90 Elbow Page 998
Aeroquip 2061 Male SAE O-Ring Boss / Male 37 Flare 45 Elbow Page 990
Aeroquip 203003 Male SAE O-Ring Boss / Male 37 Flare / Male 37 Flare Tee Page 993
Aeroquip FF5541 Code 62 Split Flange / Male 37 Flare Page 998 Brennan 4604 Hose Barb / Male SAE O-Ring Boss Page 996 Aeroquip FF5539 Code 62 Split Flange / Male 37 Flare 45 Elbow Page 998
Brennan 6810-NWO Male SAE O-Ring Boss / Female 37 Flare Swivel Page 991
Adapters - Steel - SAE O-Ring To SAE O-Ring
Brennan 4601 Hose Barb / Male SAE O-Ring Boss 90 Elbow Page 996 Aeroquip FF5540 Code 62 Split Flange / Male 37 Flare 90 Elbow Page 998 Adapters - Steel - SAE Split Flange To 37 Flare Adapters - Steel - SAE Split Flange To O-Ring Face Seal
Aeroquip 2062 Male SAE O-Ring Boss / Male 37 Flare 90 Elbow Page 991
Brennan 3474-NWO Male SAE O-Ring Boss Adjustable / Male SAE O-Ring Boss Page 994
Aeroquip 500025 Code 61 Split Flange / Male 37 Flare Page 997
45
Fluid Conveying
Brennan FS1700 Code 61 Split Flange / Male O-Ring Face Seal Page 999
Aeroquip 15.063 Male Metric 24 (DIN 3901/3902 1.Rh) / Male 37 Flare Page 1003
Voss PM Female Pipe / Metric Male Page 1006 Adapters - Steel - Metric
Adaptall 9061 Male BSPP / Female 37 Flare Swivel 90 Elbow Page 1009
Aeroquip FF5945 Code 62 Split Flange / O-Ring Face Seal 90 Elbow Page 999 Adapters - Steel - Braze & Weld To37 Flare
Adaptall 9605 Male 37 Flare / Male Metric Dual Purpose (Port or Tube) Page 1003
Voss 189 Metric Parallel Hex Socket Plug, Peflex Seal Page 1007
Adaptall 9240 Female BSPP / Male 37 Flare Page 1009
Adaptall 9606 Male 37 Flare / Male Metric Dual Purpose (Port or Tube) Page 1003
Waltersheid Metric Parallel Hex Socket Plug Page 1007 Adapters - Steel - BSPP To 37 Flare Adaptall 9250 Male 37 Flare / Female BSPP 90 Elbow Page 1010 Adapters - Steel - BSPP To Pipe
Aeroquip 73014 Braze Port / Male 37 Flare Page 1000 Adapters - Steel - 42 Inv Flare To 37 Male Flare
Fluid Conveying
Aeroquip 15.163 Female Metric 24(DIN 3901/3902 1.Rh) / Male 37 Flare Page 1003
Aeroquip 2063 Male BSPP / Male 37 Flare Page 1008 Voss PB Female Pipe / Male BSPP Page 1011
Aeroquip 202124 Male 42 Inverted Flare / Male 37 Flare Page 1001 Adapters - Steel - Restrictor
Adaptall 9022 Male 37 Flare / Female Metric Swivel Page 1004 Voss JB Male 37 Flare / Male BSPP Page 1008
Aeroquip FF1981 Restrictor Male 37 Flare / Female 37 Flare Page 1002
Voss JM Male 37 Flare / Metric Male Page 1004 Adaptall 9021 Male BSPP / Female JIC Swivel Page 1008
Adaptall 9035 Male BSPP / Female Pipe Page 1011
Adaptall 9007 Male BSPP / Male Pipe Page 1011
Aeroquip FF1980 Restrictor Male Pipe / Female Pipe Page 1002
Voss JM-90 Male 37 Flare / Metric Male 90 Elbow Page 1004
Adaptall 9210 Male 37 Flare / Female Flat-Face BSPP Page 1009
Adaptall 9023 Male Pipe / Female BSPP Swivel Page 1011
Voss JT Male 37 Flare / Metric Stand Pipe Page 1005 Adapters - Steel - Metric To Pipe Voss JB-90 Male 37 Flare / Male BSPP 90 Elbow Page 1009
Adapters - Steel - Metric To 37 Flare
46
Fluid Conveying
Adapters - Steel - BSPP To Metric Adapters - Steel - BSPT To 37 Flare Adaptall 9337 Male 37 Flare / Male JIS 30 Flare BSPP Thread Page 1021 Adapters - Steel - Misc
Voss 1MB Male BSPP / Metric Male Page 1012 Adapters - Steel - BSPP To BSPT
Adaptall 9052 Male BSPP / Adjustable Male BSPP 90 Elbow Page 1016
Voss JB-K Male 37 Flare / Male BSPT Page 1019
Adaptall 9003 Male BSPP / Male BSPT Page 1013 Adapters - Steel - BSPP To ORFS
Adaptall 9045 Male BSPP / Female BSPP 90 Elbow Page 1016
Voss JB-90K Male 37 Flare / Male BSPT 90 Elbow Page 1019 Adapters - Steel - JIS
Adaptall 9231 Male Komatsu Plug Page 1022
Adaptall 9232 Female Komatsu Cap Page 1022 Adaptall 9060 Male BSPP / Female BSPP Swivel 90 Elbow Page 1016 Voss C-JS JIS Cap Page 1020 Adaptall 9236 Male Komatsu Union Page 1022 Voss A-JSM JIS Union Page 1020
Adaptall 6002 Male O-Ring Face Seal / Male BSPP Page 1014 Adapters - Steel - BSPP Adaptall 9090 Female BSPP Run Tee Page 1016 Voss 1B Male BSPP Union Page 1015 Voss 4B BSPP Blanking & Closure Plug Page 1016 Adaptall 9000 Male BSPP Nipple Page 1015 Voss CB BSPP Blanking Cap 60 Seat Page 1017 Adaptall 9040 Male BSPP / Male BSPP Bulkhead Page 1015 Voss 189 BSPP Closure Plug Peflex Seal Page 1017 Adaptall 9025 Female BSPP Swivel Union Page 1015 Adapters - Steel - BSPT To Pipe Adaptall 9292 Male JIS / Female JIS Swivel 90 Elbow Page 1020
Fluid Conveying
Adaptall 9392 Male Komatsu / Female Komatsu 90 Elbow Page 1022
Adaptall 9247 Male 37 Flare / Male Kobelco Page 1022 Adaptall 9999 JIS Sealing Seat Page 1020 Adapters - Stainless Steel Pipe To Pipe
SSP HN Male Pipe Hex Nipple Page 1023 Adapters - Steel - JIS 30 Seat BSPP To 37 Flare SSP PTR Male Pipe / Female Pipe Bushing Page 1023 Adaptall 9220 Male 37 Flare / Female JIS 30 Seat Page 1021
Adaptall 9015 Male BSPP / Female BSPP Swivel Page 1015
Voss PB-K Female Pipe / Male BSPT Page 1018
SSP HP Male Pipe Plug Page 1023
47
Fluid Conveying
SSP CP Hex Countersunk Pipe Plug Page 1023
SSP FFM Male Pipe Branch Tee Page 1025
SSP J-ME Male 37 Flare / Male Pipe 90 Elbow Page 1028
SSP J-E Male 37 Flare / Male 37 Flare 90 Elbow Page 1031
SSP HC Female Pipe Coupling Page 1024
SSP FMF Male Pipe Run Tee Page 1026 SSP RA Male Pipe / Female Pipe Page 1024
SSP J-FE Male 37 Flare / Female Pipe 90 Elbow Page 1028
SSP J-SE Male 37 Flare / Female 37 Flare Swivel 90 Elbow Page 1031
SSP FFFF Female Pipe Cross Page 1026 SSP MF45 Female Pipe / Male Pipe 45 Elbow Page 1024 Adapters - Stainless Steel Pipe To 37 Flare
SSP J-TTM Male 37 Flare / Male Pipe / Male 37 Flare Tee Page 1029
SSP J-T Male 37 Flare Tee Page 1031
Fluid Conveying
SSP MM Male Pipe / Male Pipe 90 Elbow Page 1024
SSP J-C Male 37 Flare / Male Pipe Page 1027
SSP J-TMT Male 37 Flare / Male 37 Flare / Male Pipe Tee Page 1029 Adapters - Stainless Steel 37 Flare Union
SSP J-SBT Male 37 Flare / Female 37 Flare Swivel / Male 37 Flare Tee Page 1031
SSP J-BC Male 37 Flare / Male Pipe Bulkhead Page 1027 SSP MF Male Pipe / Female Pipe 90 Elbow Page 1025 SSP JS-C Female 37 Flare / Male Pipe Page 1027 SSP FF Female Pipe / Female Pipe 90 Elbow Page 1025 SSP J-FC Male 37 Flare / Female Pipe Page 1028 SSP J-BU Male 37 Flare Bulkhead Union Page 1030 SSP J-U Male 37 Flare Union Page 1030 SSP J-SRT Male 37 Flare / Male 37 Flare / Female 37 Flare Swivel Tee Page 1032 Adapters - Stainless Steel SAE O-Ring To 37 Flare
SSP J-TER 37 Flare Reducer / Male 37 Flare Page 1030
SSP J-GC Male 37 Flare / Male Straight Thread O-Ring Page 1033
SSP FFF Female Pipe Tee Page 1025 SSP J-ME-45 Male 37 Flare / Male Pipe 45 Elbow Page 1028 SSP J-GE-45 Male 37 Flare / Male Straight Thread O-Ring 45 Elbow Page 1033
SSP J-SE-45 Male 37 Flare / Female 37 Flare Swivel 45 Elbow Page 1030
48
Fluid Conveying
SSP J-GE Male 37 Flare / Male Straight Thread O-Ring 90 Elbow Page 1033 Adapters - Stainless Steel Metric To 37 Flare
SSP J-GP SAE O-Ring Boss Plug Page 1036
Eaton 3151 Male Pipe Square Head Plug Page 1038
Eaton Bulkhead Coupling Page 1040
Eaton 3153 Countersunk Hex Pipe Plug Page 1038 Eaton Bulkhead Coupling Page 1040 Adapters - Brass - Pipe To Pipe Countersunk Hex Pipe Plug Page 1039 Eaton 3350 Male Pipe / Female Pipe 45 Street Elbow Page 1041 Eaton 3129 Pipe Cap Page 1039
Adaptall SS9200 Male JIC 37 Flare / Metric Standpipe Page 1034 Adapters - Stainless Steel BSPP To 37 Flare Eaton 3325 Male Pipe Hex Nipple Page 1037
Adaptall SS9002 Male 37 Flare / Male BSPP Page 1035
23325 Male Pipe Hex Nipple Page 1037
Pipe Cap Page 1039
Female Pipe / Female Pipe 45 Elbow Page 1041
Fluid Conveying
Adaptall SS9240 Male 37 Flare / Female BSPP Swivel Page 1035
Eaton 3220 Male Pipe / Female Pipe Bushing Page 1037
Eaton 3300 Female Pipe Coupling Page 1039
Eaton 3400 Male Pipe / Female Pipe 90 Street Elbow Page 1041
Bushing Page 1037 Eaton Female Pipe Reducer Coupling Page 1039 Eaton 3200 Male Pipe / Female Pipe Page 1037 Female Pipe Reducer Coupling Page 1040 Female Pipe Male Pipe Page 1038 Eaton Bulkhead Coupling Page 1040 SSP J-P JIC 37 Flare Plug Page 1036 Eaton 3152 Male Pipe Hex Head Plug Page 1038
Female Pipe / Male Pipe 90 Elbow Page 1041
Adaptall SS9059 Male 37 Flare / Male BSPP Page 1035 Adapters - Stainless Steel Auxillary Components
Male Pipe / Male Pipe 90 Elbow Page 1041
SSP J-Z JIC 37 Flare Cap Page 1036
Eaton 3500 Female Pipe / Female Pipe 90 Elbow Page 1042
Hex Head Pipe Plug Page 1038
Bulkhead Coupling Page 1040
49
Fluid Conveying
Eaton 3750 Male Pipe / Female Pipe / Female Pipe Tee Page 1042
Eaton 48 Male 45 Flare / Male Pipe Page 1045
Eaton 50 Male 45 Flare / Female Pipe 90 Elbow Page 1047
2229 45 Flare Plug Page 1049
248/2000 Male Pipe / Male 45 Flare Page 1045 Eaton 3600 Female Pipe / Male Pipe / Female Pipe Tee Page 1042 Eaton 46 Male 45 Flare / Female Pipe Page 1045 Eaton 45 Male 45 Flare / Male Pipe / Male 45 Flare Tee Page 1048 246/2001 Female Pipe / Male 45 Flare Page 1046 250 Female Pipe / Male 45 Flare 90 Elbow Page 1047
1350 Female 45 Flare Union Page 1049
Eaton 42 Male 45 Flare Union Page 1049
242 Male 45 Flare Union Page 1050
Eaton 3700 Female Pipe Tee Page 1042
Fluid Conveying
Female 45 Flare / Male 45 Flare Page 1050 245 Male 45 Flare / Male Pipe / Male 45 Flare Tee Page 1048
Eaton 3950 Female Pipe Cross Page 1043 Adapters - Brass - Pipe To 37 Flare
Eaton 54 Male 45 Flare / Male Pipe 45 Elbow Page 1046 Female 45 Flare Swivel / Male 45 Flare 90 Elbow Page 1050 251 Male 45 Flare / Male 45 Flare / Male Pipe Tee Page 1048
Aeroquip 2021 Male Pipe / 37 Male Flare Page 1044
254/2007 Male Pipe / Male 45 Flare 45 Elbow Page 1046
Eaton 55 Male 45 Flare / Male 45 Flare 90 Elbow Page 1050 Aeroquip 2023 Male Pipe / Male 37 Flare 45 Elbow Page 1044 Adapters - Brass - 45 Flare Union Eaton 49 Male 45 Flare / Male Pipe 90 Elbow Page 1046 255 Male 45 Flare / Male 45 Elbow 90 Elbow Page 1050
Aeroquip 2024 Male Pipe / Male 37 Flare 90 Elbow Page 1044 Adapters - Brass - Pipe To 45 Flare
Eaton 40 45 Flare Cap Page 1049
249/2003 Male Pipe / Male 45 Flare 90 Elbow Page 1047 Eaton 39 45 Flare Plug Page 1049 Eaton 44 Male 45 Flare Tee Page 1051
50
Fluid Conveying
Dixon Male Half Hose Shank Page 1060 244 Male 45 Flare Tee Page 1051 Adapters - Brass - 42 Inv Flare To 45 Male Flare Female 42 Inverted Flare / Male Pipe 90 Elbow (Heavy) Page 1054 Aeroquip 200001 Male 42 Inverted Flare / Male 45 Flare Page 1052 Adapters - Brass - 42 Inv Flare To Pipe Milton Multi Series Female Half Valved Female Pipe - Brass Page 1062 Adapters - Brass - 42 Inv Flare Unions & Accessories FD40-1054 Female Half Female Pipe - Valved Page 1058 Eaton 402 Female 42 Inverted Flare / Male Pipe 90 Elbow Page 1054 Hose Cap Page 1056 Quick Disconnects - Air Aeroquip FD40 Quick Disconnects - Air Aeroquip FD41
Oetiker Swing Coupling Female Half - Safety Vent Female Pipe Valved Page 1062
Eaton 302 Female 42 Inverted Flare Union Page 1055 Eaton 202 Male Pipe / Female 42 Inverted Flare Page 1053 Eaton 131 Male 42 Inverted Flare Plug (Steel) Page 1055 Male Pipe / Female 42 Inverted Flare Page 1053 Male x Female 42 Inverted Flare Page 1055 Male Pipe / Female 42 Inverted Flare (Heavy) Page 1053 Eaton 702 Female 42 Inverted Flare Union Tee Page 1055 Eaton 252 Female Pipe / Female 42 Inverted Flare Page 1053 Adapters - Brass - Garden Hose
Oetiker Swing Coupling Female Half - Safety Vent Female Pipe Valved Page 1059
FD41-1013 Male Half Female Pipe - Non-Valved Page 1062 Quick Disconnects - Air Aeroquip FD43
Fluid Conveying
Oetiker Swing Coupling Female Half - Safety Vent Male Pipe Valved Page 1059
FD43-1001 Female Half Female Pipe - Valved Page 1063 Milton Multi Series Female Half Valved Female Pipe - Brass Page 1059 Quick Disconnects - Air - Misc
Dixon Air Chief Automotive Page 1064 Dixon Female Half Hose Shank Valved Page 1059 Dixon Dix-Lock Page 1064
Eaton 352 Male Pipe / Female 42 Inverted Flare 45 Elbow Page 1054
Female Pipe / Female Hose Swivel Page 1056
FD40-1013 Male Half Female Pipe - Non-Valved Page 1059 Milton G Style Page 1064 FD40-1014 Male Half Male Pipe - Non-Valved Page 1060
Female 42 Inverted Flare / Male Pipe 45 Elbow Page 1054
Male Hose / Male & Female Pipe Page 1056
Milton P Style Page 1065
51
Fluid Conveying
Quick Disconnects - Fluid Transfer & Hyd - Aeroquip 5100
5610 Male Half Female SAE O-Ring - Valved Page 1069
FD45-1002 Male Half Female Pipe - Valved Page 1073
FD89-1001 Female Half Female Pipe - Valved Page 1076
5657 Dust Cap Page 1069 5100-S5 Female Half - Wing Nut Female Pipe - Valved Page 1066 5659 Dust Plug Page 1069 5100-S2 Male Half Less Flange Female Pipe - Valved Page 1067
FD45-1040 Dust Cap Page 1073
FD89-1005 Female Half Female SAE O-Ring - Valved Page 1076
FD45-1041 Dust Plug Page 1073 Quick Disconnects - Fluid Transfer & Hyd - Aeroquip FD45 Brass
Fluid Conveying
FD89-1009 Female Half Dust Cap PVC Page 1077 5100-S7 Dust Cap with Chain Page 1067 5603 Break-Away Frame Page 1083 FD45-1101 Female Half Female Pipe - Valved Page 1074
5100-S9 Dust Plug with Chain Page 1067 FF082 Repair Kit Page 1070 Quick Disconnects - Fluid Transfer & Hyd - Aeroquip 5600 Quick Disconnects - Fluid Transfer & Hyd - Aeroquip FD42 FD45-1086 Male Half Female Pipe - Valved Page 1074 Quick Disconnects - Fluid Transfer & Hyd - Aeroquip FD45 SS
FD89-1008 Male Half Dust Plug PVC Page 1077 Quick Disconnects - Fluid Transfer & Refrig - Aeroquip 5400
5601 Female Half Female Pipe Valved Page 1068
FD42-1002 Male Half Female Pipe - Valved Page 1071 Quick Disconnects - Fluid Transfer & Hyd - Aeroquip FD45 Steel
5400-S8 Dust Plug with Gasket Page 1078 FD45-1005 Female Half Female Pipe - Valved Page 1075 Quick Disconnects Aeroquip Hydraulic Farm
5602 Male Half Female Pipe Valved Page 1069 FD45-1003 Female Half Female Pipe - Valved Page 1072 5608 Female Half Female SAE O-Ring - Valved Page 1069
FD45-1004 Male Half Female Pipe - Valved Page 1075 Quick Disconnects - Fluid Transfer & Hyd - Aeroquip FD89
FD76-1002 ISO 5657 Male Half Female Pipe - Poppet Valve Page 1080
52
Fluid Conveying
Quick Disconnects - Oil Drain - Aeroquip FD14 FD90-1046 Male Half Metric Male O-Ring - Valved Page 1084 FD14-4002 Male Half - Valved Page 1081 FD90-1040 Dust Cap for Male Halves Page 1084 FD14-4003 Female Half 5/8 Hose Barb Page 1081 Quick Disconnects - Water Blast - Aeroquip FD69 Flanges - Steel - SAE 4-Bolt Anchor W168 Pipe Thread Elbow Code 61 O-Ring Half Page 1088 Anchor AS Code 61 Gage Port Spacer Page 1091
Anchor W60 Flat Socket Weld Code 62 Flat Face Half Page 1087
Anchor FOPX Flange Plugs Code 62 O-Ring Half Page 1091
FD69-1001 Female Half Female Pipe Steel Page 1082
Anchor W43-CB Pipe Thread Code 61 O-Ring Half Counterbored for Bolt Head Page 1085
Anchor W300 Male JIC Code 61 O-Ring Half Page 1088
Anchor ASX Code 62 Gage Port Spacer Page 1091
Fluid Conveying
FD69-1002 Male Half - Female Pipe Page 1082 Quick Disconnects Diagnostic - Aeroquip FD90
Anchor W4 Flat Socket Weld Code 61 O-Ring Half Page 1085
Anchor W30 Butt Weld Code 62 O-Ring Half Page 1089
Anchor SPX Code 62 Zero PSI Shipping Plate Page 1092 Hose/Tube Cleaning Guns & Projectiles
Anchor W72 Flat Socket Weld Code 61 Low Pressure O-Ring Half Page 1086
Anchor W29 Butt Weld Code 62 Flat Face Half Page 1089 Standard Projectiles Page 1093
Anchor W61 Flat Socket Weld Code 61 Flat Face Half Page 1086
Anchor W7 Saddle Weld Code 61 Flat Face Half Page 1090 Flanges - Steel - SAE 4-Bolt Accessories
Metric & BSP Seals & Washers
FD90-1044 Male Half Male SAE O-Ring Boss - Valved Page 1083 Anchor W59 Flat Socket Weld Code 62 O-Ring Half Page 1087
Voss Self-Centering BSP Bonded Seals Page 1094
FD90-1012 Male Half Male Pipe - Valved Page 1084
Anchor FOP Flange Plugs Code 61 Page 1091
Voss Self-Centering Metric Bonded Seals Page 1094
53
Fluid Conveying
Voss Copper Washers Page 1094 Protective Closures - Alliance Plastics
Anchor SFXO Code 62 Split Flange Kits Page 1097
Single Weld Plate, Hex Head Bolts with Spacers Page 1104
Single Weld Plate, Hex Head Bolts, Cover Plate Page 1108 Miscellaneous Twin Series Parts Page 1109
Aeroquip O-Rings for Fittings & Adapters Page 1098 Threaded Plugs For Flared Fittings Page 1095 Mounts on Rail, Hex Head Bolts with Cover Plate Page 1104
Swivel Joints - Aeroquip FS65 Series
Threaded Caps For Flared Fittings Page 1095
Support Clamps - Hose
FS65000 Female Pipe Swivel / Male Pipe Page 1110
Fluid Conveying
Tear Caps For Pipe Threads Page 1095
Aeroquip 900729 Hose Support Clamps Page 1100 Support Clamps - Hydrazorb 100-200 Series
Rail Nuts Page 1105 Support Clamps - Stauff Heavy Series
Tapered Plugs for Pipe Threads Page 1096
FS65005 Female Pipe Swivel / Female Pipe Page 1110
Caps For O-Ring Face Fittings Page 1096 100-200 Series Clamps Page 1101
Single Weld Plate, Hex Head Bolts, Cover Plate Page 1106
FS65007 Female Pipe / Male Pipe Page 1111
Split Flange Caps Page 1096 Base Channel Page 1101 Bolted Flange Protectors Page 1096 Split Flange Kits & O-Rings Support Clamps - Stauff Standard Series
Stacking Bolts & Safety Plates Page 1107 FS65008 Female Pipe (Fixed) / Female Pipe Page 1111 Clamp Bodies Page 1107 Support Clamps - Stauff Twin Series Single Weld Plate, Hex Head Bolts, Cover Plate Page 1102 FS65009 Male 37 Flare / Male SAE O-Ring Boss Page 1111 Swivel Joints - Aeroquip FS5900 Series
Anchor SFO Code 61 Split Flange Kits Page 1097
54
Fluid Conveying
Aeroquip Performance Fittings - Reusable - AQP Racing & StartLite Hose Aeroquip Performance Fittings - Crimp - AQP Racing & StartLite Hose
FS59005 Female Pipe / Male 37 JIC Page 1112 Air Brake Products
Red/Blue Anodized Aluminum 37 Flare Swivel Page 1120
Red/Blue Anodized Aluminum 37 Flare Swivel, 90 Elbow Page 1121
Red/Silver Anodized Aluminum 37 Flare Swivel Page 1123
Air Chamber Hose Lines Page 1113
Nickel-Plated Aluminum 37 Flare Swivel Page 1120
Nickel-Plated Aluminum 37 Flare Swivel, 90 Elbow Page 1121
Red/Silver Anodized Aluminum 37 Flare Swivel, 45 Elbow Page 1123
Red/Silver Plated Steel 37 Flare Swivel Page 1120 Gladhand Couplings Page 1114 Aeroquip Performance Hose Red/Blue Anodized Aluminum 37 Flare Swivel 30 Elbow Page 1120 Red/Silver Plated Steel 37 Flare Swivel, 90 Elbow Page 1122 Red/Silver Anodized Aluminum 37 Flare Swivel, 90 Elbow Page 1123
Fluid Conveying
FBA AQP Racing Hose Page 1116 Red/Blue Anodized Aluminum 37 Flare Swivel 45 Elbow Page 1120
Red/Silver Anodized Aluminum 37 Flare Swivel, 150 Elbow Page 1123
FBU StartLite Racing Hose Page 1116
FC332 AQP SOCKETLESS Hose Page 1117
Nickel-Plated Aluminum 37 Flare Swivel 45 Elbow Page 1121
Red/Silver Anodized Aluminum 37 Flare Swivel, 180 Elbow Page 1124 Aeroquip Performance Fittings - AQP SOCKETLESS Hose
FBF A/C Hose Page 1118
2807 Teflon Racing Hose Page 1118
Red/Silver Plated Steel 37 Flare Swivel 45 Elbow Page 1121
Red/Blue Anodized Aluminum 37 Flare Swivel Page 1124
FC300 AQP High Pressure Hose Page 1119 Red/Blue Anodized Aluminum 37 Flare Swivel 60 Elbow Page 1121 Red/Blue Anodized Aluminum Banjo Page 1122
Nickel-Plated Aluminum 37 Flare Swivel Page 1124
Brass 37 Flare Swivel Page 1124

55
Fluid Conveying
Aeroquip Performance Fittings - Teflon Racing Hose Red/Blue Anodized Aluminum 37 Flare Swivel, 45 Elbow Page 1124
Plated Steel, Brass Nipple, 37 Flare Swivel Page 1128
Plated Steel 45 Flare Swivel, 90 Elbow Page 1129
Brass Male Inverted Flare Page 1126
Stainless Steel 37 Flare Swivel Page 1128
Plated Steel, Brass Nipple, Male Pipe Page 1129
Brass Male Pipe Page 1126 Plated Steel 37 Flare Swivel, 45 Elbow Page 1125 Aeroquip Performance Fittings - Reusable - FBF A/C Hose Plated Steel 37 Flare Swivel, 45 Elbow Page 1128
Plated Steel Male Inverted Flare Page 1129
Fluid Conveying
Female O-Ring Pilot Page 1127
Forged Stainless Steel 37 Flare Swivel, 45 Elbow Page 1128
Plated Steel Male Inverted Flare, 90 Elbow Page 1130
Female O-Ring Pilot with Charge Port Page 1127
Plated Steel 10mm Banjo Page 1130 Plated Steel 37 Flare Swivel, 90 Elbow Page 1128 Plated Steel 10mm Banjo, 17 Elbow Page 1130 Forged Stainless Steel 37 Flare Swivel, 90 Elbow Page 1129
Female O-Ring Pilot 45 Elbow Page 1127 Plated Steel 37 Flare Swivel, 90 Elbow Page 1125
Replacement Sleeves for Teflon Racing Hose Fittings Page 1130 Aeroquip Performance Fittings - Reusable - AQP High Pressure Hose
Female O-Ring Pilot 90 Elbow Page 1127 Red/Blue Anodized Aluminum 37 Flare Swivel, 120 Elbow Page 1125
Plated Steel, Brass Nipple, 45 Flare Swivel Page 1129
Plated Steel 37 Flare Swivel Page 1130 Female O-Ring Pilot 90 Elbow with Charge Port Page 1127 Red/Blue Anodized Aluminum 37 Flare Swivel, 150 Elbow Page 1126
56
Fluid Conveying
Aeroquip Performance Adapters - AN Flare Bulkhead
Female 37 Flare Swivel 45 Elbow Page 1132
Female 37 Tee Blue Anodized Aluminum Page 1134
Male 37 Flare / Male 37 Flare Bulkhead Union (AN 832) Page 1136
Female 37 Flare Swivel 90 Elbow Page 1132
Female 37 Flare Swivel / Male 37 Flare / Male 37 Flare Tee Page 1134
Male 37 Flare / Male 37 Flare 90 Bulkhead Union Elbow Blue Anodized Alum (AN 833) Page 1136
Plated Steel Male Inverted Flare Page 1131
Female 37 Flare Swivel / Male 37 Flare 45 Elbow Page 1133
Male 37 Flare / Female 37 Flare Swivel / Male 37 Flare Tee Page 1134 Male 37 Flare Bulkhead Run Tee (AN 804) Page 1136 37 Flare Plug Blue Anodized Aluminum (AN 806) Page 1134
Plated Steel Male Inverted Flare, 45 Elbow Page 1131 Female 37 Flare Swivel / Male 37 Flare 90 Elbow Page 1133
Fluid Conveying
Plated Steel Male Inverted Flare, 90 Elbow Page 1131 Male 37 Flare Tee Blue Anodized Aluminum (AN 824) Page 1133
37 Flare Cap Blue Anodized Aluminum (AN 929) Page 1135 Aeroquip Performance Adapters - O-Ring Boss
Male 37 Flare Bulkhead Tee (AN 834) Page 1136
Blue Anodized Aluminum Locknut (AN 924) Page 1137 Aeroquip Performance Adapters - AN Flare Male O-Ring Boss / Male 37 Flare Blue Anodized Aluminum Page 1133 SAE O-Ring Boss Plug Blue Anodized Aluminum (AN 814) Page 1135 Aeroquip Performance Adapters - AN Tube Fittings Male 37 Flare / Male 37 Flare Blue Anodized Aluminum (AN 815) Page 1132 Male 37 Flare / Male 37 Flare (AN 919) Page 1133 37 Flare Nut Blue Anodized Aluminum (AN 818) Page 1135 Male 37 Flare / Male 37 Flare 90 Elbow, Blue Anodized Aluminum (AN 821) Page 1134 Aeroquip Performance Adapters - AN Flare to Pipe
Male 37 Flare / Male Pipe Aluminum (AN 816) Page 1137
Female 37 Flare / Female 37 Flare Blue Anodized Aluminum Page 1132
Male 37 Flare / Male Pipe Aluminum (AN 816) Black Page 1137
37 Flare Sleeve Blue Anodized Aluminum (AN 819) Page 1135
57
Fluid Conveying
Male 37 Flare / Male Pipe / Female Pipe Tap, Blue Anodized Aluminum Page 1138
Male 37 Flare / Metric Male Steel Page 1139 Tank Welding Bungs (AN 871) Page 1142 Male 37 Flare / Metric Male Blue Anodized Aluminum Page 1140 Aeroquip Performance Adapters - Pipe Flare To Braze (Unplated) Page 1142 Aeroquip Performance Adapters - Special Flare
Male 37 Flare / Banjo Page 1144
SAE Banjo Bolt Page 1144 Aeroquip Performance Brake System Adapters Metric
Male 37 Flare / Male Pipe 45 Elbow Aluminum (AN 823) Page 1138
Male 37 Flare / Male Pipe 90 Elbow Aluminum (AN 822) Page 1138
Female Pipe Coupling Blue Anodized Aluminum (AN 910) Page 1140
Aeroquip Performance Brake System Adapters Inverted Flare
Male 37 Flare / Metric Male Flare Page 1144
Fluid Conveying
Male 37 Flare / Male Pipe 90 Elbow Aluminum (AN 822) Black Page 1138
Male Pipe Hex Nipple Blue Anodized Aluminum (AN 911) Page 1140
Male 37 Flare / 42 Inverted Male Flare Page 1143
Male 37 Flare / Metric Female Flare Page 1144 Aeroquip Performance Brake System Adapters Metric Banjo
Male 37 Flare / Male 37 Flare / Male Pipe Tee Blue Anodized Aluminum (AN 825) Page 1139
Male Pipe / Female Pipe Blue Anodized Aluminum 90 Elbow (AN914) Page 1140
Male 37 Flare / Female Inverted Flare Tee Page 1143 Male 37 Flare / Metric Banjo Page 1144 Male 37 Flare / 42 Male Inverted Flare Page 1143 Metric Banjo Bolt Page 1145
Female Pipe Tee Blue Anodized Aluminum (AN 917) Page 1141 Male 37 Flare / Male 37 Flare / Male Pipe Tee Blue Anodized Aluminum (AN 826) Page 1139 Aeroquip Performance Adapters - High Pressure Male Pipe / Female Pipe Bushing Blue Anodized Aluminum (AN 912) Page 1141
Male 37 Flare / 30 Male Inverted Flare Page 1143 Aeroquip Performance - Fuel System - Aluminum Carburetor Adapters
Male 37 Flare / 42 Inverted Male Flare Page 1139 Aeroquip Performance Adapters - Metric
Allen Head Pipe Plug Blue Anodized Aluminum (AN 932) Page 1141 Aeroquip Performance Adapters - Aluminum Tank Welding Bungs
Male 37 Flare / Female Inverted Flare Page 1143 Aeroquip Performance Brake System Adapters - SAE Banjo
Holley Single Feed, 9/16-24 x Male 37 Flare Page 1146
58
Fluid Conveying
Holley Dual Feed, 7/8-20 x Male 37 Flare Page 1146
Male 37 Flare x Inverted Flare Page 1147 Aeroquip Performance - Fuel System - Aluminum Fuel Blocks
BSP Banjo Bolts Page 1149 Aeroquip Performance Couplings
PRO CLAMP Aluminum Hose Connectors Page 1154
Holley Dual Feed, 7/8-20 x Male 37 Flare Page 1146
FBR Stainless Steel Overbraid Page 1154 Aeroquip Performance Accessories
Holley Dual Feed, 7/8-20 x Female 37 Flare Page 1146
Aluminum Fuel Blocks Page 1147 Aeroquip Performance - Fuel System - Aluminum In-Line Fuel Pressure Adapters
QUICK DRAIN Oil Pan Couplings Page 1150 900729 Support Clamps Page 1155 Quick Disconnect Radiator/Cooling Refill Couplings Page 1150
Carter AFB, 5/8-20 x Male 37 Flare Page 1146 Aluminum In-Line Fuel Pressure Adapters Page 1147 Weber, 12mm 1.5 x Male 37 Flare Page 1146 Aeroquip Performance - Fuel System - Metric Banjo Hose Barbs
Fluid Conveying
Aluminum Crush Washers Page 1155
624 Fire Sleeve Page 1156 Pressure Sensing Couplings Page 1151
Aeroquip Performance - Fuel System - Aluminum Fuel Pump Adapters
Metric Banjo Hose Barbs Page 1148 Aeroquip Performance - Fuel System - Metric Banjo Bolts Silicone Reducers Page 1156 Aeroquip Performance Assembly Equipment
5/8-18 Inverted Flare x Male 37 Flare Page 1147 Metric Banjo Bolts Page 1148
Hydraulic Couplings Page 1152
3/8 Male Pipe x Male 37 Flare Page 1147 Aeroquip Performance - Fuel System - JIC 37 Male Flare to 42 Inv Flare Double Metric Banjo Bolts Page 1148 Aeroquip Performance - Fuel System - BSP Banjo Bolts
Fuel Check Couplings Page 1153 Aeroquip Performance PRO CLAMP & Overbraid
Vise Jaw Inserts Page 1157
59
Fluid Conveying
Hose Assembly Lube Page 1157
Hand-Held Hose Cutter Page 1158
SOCKETLESS Fitting Assembly Tool Page 1158
Fluid Conveying
60
Seals - Inch Sizes
Polyurethane U-Seals Page 1177
Urethane Wiper Rings Style BT Page 1183
Glass Filled PTFE Piston Seals Style 1400 Page 1186
90 Durometer Buna-N O-Rings Page 1197
Homogeneous Buna-N U-Seals Page 1179
Metal Clad Rubber Wiper Rings Page 1183
Glass Filled PTFE Piston Seals Style 1600 Page 1187
90A Durometer Urethane Back-Up Rings Page 1198
Spiral External Retainer Rings Page 1200 Metal Clad Urethane Wiper Rings Page 1183 Vee Packing Sets Page 1179 Seal Aligning Bearings Page 1200 Seals - Metric Sizes Glass Filled PTFE Piston Seals Style 1800 Page 1188
Heavy Duty Metal Clad Urethane Wiper Rings Page 1184 Cotton Fabric & Rubber Piston Cups Page 1180 Urethane Wiper Rings Style ST Page 1184 Piston T-Seals Page 1180
Bronze Filled PTFE Piston Seals Style 1850 Page 1189
Fluid Conveying
Polyurethane Piston Seals Style 2700 Page 1189
Metric Urethane Rod U-Seals Page 1201 Seals - Assortment Kits & Tools
Rod T-Seals Page 1181
Urethane Wiper Rings Style KW Page 1184
Double-Acting Piston Seals Style PSC Page 1190 O-Ring Kit (Buna-N) Page 1202
Cast Iron Piston Rings Page 1181
Buna-N Quattro Rings Style QR Page 1185
Bronze Filled Piston Seals Style PSQ Page 1191
O-Ring Kit (Viton) Page 1202 Nylon Wear Rings Page 1182 Caterpillar D-Rings Page 1185 70 Durometer Buna-N O-Rings Page 1192
Urethane Wiper Rings Style AN Page 1182
Rod Buffer Seals Style KR Page 1185
Viton (Fluorocarbon) O-Rings Page 1197
Straight Thread O-Ring Kit Page 1202
61
Quad Ring Kit Page 1202
Urethane Back-Up Ring Kit Page 1204
Denso Petrolatum Tape (Corrosion Protection) Page 1227
Service Station & Tank Truck Equipment Page 1230
O-Ring Face Seal Kit Page 1203 Teflon Back-Up Ring Kit Page 1205 Seals - Cylinder Kits & Parts Boeshield T-9 Corrosion Shield Page 1228
Hose Nozzles Page 1231
Flange O-Ring Kit Page 1203 Textbooks Page 1231 Anti-Seizing Products Page 1228
Fluid Conveying
Telescopic Cylinder Parts Page 1206 Caterpillar D-Ring Kit Page 1203 Miscellaneous Products
Gloves Page 1231
Japanese Size Metric O-Ring Kit Page 1203 Felsted Push-Pull Cables Page 1208
SCRUBS in-a-Bucket Hand Cleaner Towers Page 1229
Hand Tools Page 1232 European Size Metric O-Ring Kit Page 1204 Thread Sealants Page 1223 Conbraco Cast Bronze Y-Strainers Page 1229
O-Ring Splice Kit Inch Sizes Page 1204 Thread Lock / Bolt Lock Products Page 1226 O-Ring Splice Kit Metric & Inch Sizes Page 1204 Allied Witan Filter Vents Page 1227
Hub City Splined Hubs & Couplings Page 1230
Houston Vibrator Pneumatic Piston Vibrators Page 1232
Dill Tire Service Products Page 1230
Cable (Wire) Ties Page 1233
62
Hannay, Reelcraft Hose Reels Page 1234 Lubrication Equipment & Accessories Page 1249
Pressure Washer Products Page 1235
Koenig Winches Page 1237
Fluid Conveying
Kawasaki / Lantec Peel Press Drive Page 1238
Hydraulic & Lubricating Fluids Page 1239
CRC Chemical Maintenance Products Page 1246
63
Notes
Hydraulic Power & Control __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ Pneumatic Power & Control __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ Fluid Conveying __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ Miscellaneous Products __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________
64
This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.
Notes
65
Notes
66
Catalog Guide
Hydraulic Power & Control Stock Item Catalog Only items we stock are shown in this catalog (Some exceptions, see below). If you do not find what you are looking for, please contact us. We should be able to help you. A substantial percentage of our sales is for "nonstock" items. Normal and Bold fonts, and bullets are used in the tables to specify where the item is stocked: Normal Catalog Part No. Item is stocked only at our Distribution Center. Bold Catalog Part No. Item is stocked at our Distribution Center and at every branch location. Bulleted Catalog Part No. Item is stocked at our Distribution Center and at certain branch locations. (All are subject to change) Some Non-Stock Items Shown An underlined Model Number or Part Number in the second column in the tables designates a non-stock item. Any table with non-stock items in it will have a note that calls this to your attention. Dimensions All dimensions are in inches unless stated otherwise. Weights All weights are in pounds. All weights are unit weights, unless stated otherwise. Weight listed on some products may vary due to different packaging used by product manufacturer. Prices Prices are not shown. For your current price, contact Customer Service, or visit our web site at www.hydraulic-supply.com and click on Join to access the e-commerce features of our site. Copyright All contents COPYRIGHT 1999-2013 Hydraulic Supply Co. All Rights Reserved. Any use of the contents of this publication without the written permission of the publisher is strictly prohibited. All of the trademarks mentioned belong to their respective owners. Digital Stock Products Catalog This catalog is also available digitally on a CD or from our web site. The digital version uses Adobe Acrobat Reader software. A powerful Search Index is included which can rapidly locate products when using the Search feature. Catalog CDs may be requested by phone (800-507-9651), by fax (954-845-9113) or downloaded on-line at http://www.hydraulic-supply.com.
Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Abbreviations and Symbols Used @ Cd. cc cSt cu.in. cu.in./rev Dec. deg.F. F Dia. P Displ. Freq. At Code Cubic centimeter Centistokes Cubic inch Cubic inch per revolution Decimal Degrees Farenheit Degrees Degrees Farenheit Diameter Differential Pressure Displacement Frequency ft. gpm Hz I.D. in. in./Hg. lb lb-ft lb-in Min. Max. mm Nom. O.D. Feet Gallons per minute Hertz Inside diameter Inch Inches of mercury Pounds Foot pounds Inch pounds Minimum Maximum Millimeter Nominal Outside diameter % Pkg. PSI Qty. rpm sq.in. ss St.Thd. SUS Temp. Wt. Percent Package Pounds per square inch Quantity Revolutions per minute Square inches Stainless steel Straight thread Saybolt Universal Seconds Temperature Weight
67
Ordering Information
Hydraulic Power & Control Product Selection & Application The determination and methods of the use, suitability, installation and design application for the parts and assemblies we sell is the responsibility of the purchaser. Hose conforms to the specification and requirements specified by the hose manufacturer. If you need specific product information on our products or assemblies, we are glad to provide it upon request. We also have available, upon request, brochures and information regarding general use and safety issues for hydraulic products and assemblies. Warranty Our warranty is in this catalog ( page 70 ), on our credit application, on our web site, and is available at all our local stores and on request. We provide our warranty or we extend the manufacturers warranty where applicable.
Fluid Conveying
Hose Application Warnings Agency and industry standards may apply to your application. It is your responsibility to decide what regulations and/or standards apply, and inform us. We will then advise you if the products selected meet those standards. Improper selection, installation and/or routing may significantly shorten the life of a hydraulic hose, which could result in hose rupture and failure, which may then result in serious personal injury or property damage. Most hydraulic fluids are flammable and proper safeguards have to be taken to contain any fluid if a hose failure occurs in an environment with a source of ignition. Hoses have a service life, and high, repetitive shock reduces hose service life. You need to inspect and change out hoses within their service life for your application or hose rupture and failure may occur. S. T. A. M. P. - You must consider the Size, Temperature, Application, Medium and Pressure when selecting hose and hose fittings. For your application, review the Important Safety Information starting on page 1355 . If you dont already have the proper training or information, ask for: Eaton/Aeroquip Fluid Conveyance Products Catalog A-HOOV-MC001-E1 Warnings - pages 11-12 Fluid Compatibility - pages 349-355 (this catalog page 1357 ) SAE Recommended Practices (SAE J1273) - page 356 (this catalog page 1355 ) Hose Routing & Installation - page 359 (this catalog page 1364 ) Thread Style Pressure Performance - page 376 (this catalog page 1349 ) Aeroquips How to Identify Fluid Ports and Connectors (E-SROV-TS009-E) Aeroquips Matchmate Plus The 3 Minute Crimp Hose Assembly System (A-HX-MC-001-E) Aeroquips Routing Hose and Tubing (JA412) Aeroquips Performance Products (A-SPPE-MC001-E2) Eaton/Aeroquip catalogs are also availble for download at http://hydraulics.eaton.com/products/
68
Ordering Information
Hydraulic Power & Control Placing an Order By Phone 800-507-9651 Toll-free from Florida, Georgia and the Caribbean. 954-453-8148 Local phone number. 800-507-9651 24 hour Emergency Service.
By Fax or E-Mail or Mail When ordering by fax (954-845-9113) or E-mail (gold@hydraulic-supply.com) or Mail, please be sure to include the following: Purchase Order Number (if we need one). Your name, area code, phone number, fax number and e-mail address. "Ship to" address if different from "Bill to". Shipping instructions (carrier). Complete catalog description including catalog part number, model number, quantity, etc. If its your policy to issue a confirming order following phone orders, please mark the order "confirming". Mailing Address - Hydraulic Supply Co. 300 International Parkway Sunrise, FL 33325. Note: Customers assigned to one of our Customer Service Teams can contact their team directly: Blue Team Tel: 800-507-9649 Fax: 954-845-2598 e-mail: blue@hydraulic-supply.com Gold Team Tel: 800-507-9651 Fax: 954-845-9113 e-mail: gold@hydraulic-supply.com Orange Team Tel: 800-432-6992 Fax: 954-851-9835 e-mail: orange@hydraulic-supply.com Yellow Team Tel: 800-507-9650 Fax: 954-845-9524 e-mail: yellow@hydraulic-supply.com Local service is provided at our branch locations listed on page 76 .
Pneumatic Power & Control Fluid Conveying
By visiting a branch office By Internet
Visit Our web site at www.hydraulic-supply.com and click on Join to access the e-commerce features of our site Please call for details.
By EDI
By Bin Management System / Modem
Please call for details.
Minimum Order
No minimum order is required.
Opening an Account Fill out credit application on page 71 and fax in. If purchases are exempt from Florida sales tax, please furnish a signed copy of your Annual Resale Certificate (Form DR-13). In Georgia, please furnish a signed copy of your Georgia State Sales Tax Exemption Certificate. In Tennessee, please furnish a signed copy of your Tennessee Department of Revenue Blanket Certificate of Resale. Credit Cards Same Day Shipping We accept MasterCard, Visa and American Express. Orders placed by 4pm will ship the same day. Orders placed after 4pm can ship same day provided special arrangements are made. If you need a written quotation, please let us know. See page 70 .
Quotations Terms & Conditions Note:
Some items are only available for sale in our Approved Trading Areas.
69
Terms & Conditions

Pricing - Prices shown in this catalog are subject to change without notice and are not to be construed as a definite quotation or offer to sell by Hydraulic Supply Co. This catalog is maintained only as a source of general information, and any prices shown herein are subject to confirmation with a specific quotation. Orders are billed at the prices in effect at the time of shipment. Prices are FOB Factory. Specifications - Specifications are subject to change without notice. Cross Reference Information - Product cross-reference comparisons do not imply that all products compared are available, or in the case of functional equivalency, that performance and other characteristics are exactly comparable. For critical applications, review specifications prior to purchase. Quotations - Quotations on large quantities are available on request. All written quotations automatically expire within thirty (30) days from the date quoted. Taxes - Hydraulic Supply Co. is required to charge state and local tax on items for which a sales tax exemption certificate has not been provided. Freight Policy - Unless otherwise requested by the buyer, material will be shipped via carriers of our choice with shipping, handling and packaging charges prepaid and added to the invoice. Note: We only insure if specifically requested by the buyer, with insurance charges prepaid and added to the invoice. Order Cancellation - Any cancellation must be approved by Hydraulic Supply Co., and may be subject to restocking and other charges. Payment Terms - Payment terms to Customers with satisfactory credit are Net 30 Days, meaning payment is due within 30 days from date of invoice. Customers agree to collection and/or attorney fees not exceeding 30% of amount past due in case of default of payment Damaged Shipment - Merchandise shipped is carefully packed in compliance with carrier requirements. Title and risk of loss pass to the customer upon tender of shipment to the carrier. If product is damaged in transit, consignee must file claim with the carrier. Shortages - All claims for shortage or shipment errors must be made within 10 days after receipt of shipment. Returned Material Policy - We will normally accept returned material under the following conditions: A copy of the invoice is furnished. The material is returned within 30 days from date of invoice. The material is in new resalable condition (unused, unpainted, etc.). The material is normal stock for us (not special order). Please call for a Return Authorization Number (RMA) prior to returning any material. Returned material must be accompanied with the RMA Number. Limited Warranty - Seller warrants for 90 days from the date of sale that the equipment sold, as described hereon, shall be free from defects in material and workmanship. Seller's liability under this warranty is limited to repair or replacement of any part or parts of said equipment which shall be returned to seller, shipping charges prepaid and which seller's examination discloses to its sole satisfaction to be defective. This is seller's only warranty. By accepting the equipment under this warranty, buyer acknowledges that said equipment is being sold under no other written or oral warranties, neither expressed or implied, of any kind whatsoever such as, but not necessarily limited to, warranty of merchantability of fitness. Warranty Disclaimer - Hydraulic Supply Co. has made a great effort to illustrate and describe the products in this catalog accurately. However, such illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty that the products are MERCHANTABLE, or FIT FOR A PARTICULAR PURPOSE, or that the products will necessarily conform to the illustrations or descriptions. No warranty or affirmmation of fact, express or implied, other than as set forth in the limited warranty statement above is made or authorized by Hydraulic Supply Co. Repair Warranty - All repairs are warranted for 90 days from the date of invoice. This warranty is limited to the cost of the repair only. Limitation of Liability - Any liability for consequential and incidental damages is expressly disclaimed. Hydraulic Supply Co.'s liability in all events is limited to, and shall not exceed, the purchase price paid. Manufacturers' Warranties / MSDS Sheets - Most of the products listed in this catalog are warranted by their manufacturer. Copies of such warranties are available free of charge. Requests should include the catalog part number (if any) and the manufacturer's model number for each item involved. Material Safety Data Sheets (MSDS) are also available upon request. Address requests to: Hydraulic Supply Co., 300 Int'l Pkwy, Sunrise, FL 33325. *** NOTE *** Please see our website for the most up-to-date terms: http://www.hydraulic-supply.com/html/terms.htm
Fluid Conveying
70
Credit Application
Company Name (Billing): ______________________________________ Contact: ________________________ Address: ____________________________ City: ______________________ State: _____ ZipCode: _________ Phone: _____________________ Fax: ____________________ E-mail: ________________________________ Company Name (Shipping): ____________________________________ Contact: _______________________ Address: ____________________________ City: ______________________ State: _____ ZipCode: _________ Phone: _____________________ Fax: ____________________ E-mail: ________________________________ Accts. Payable Contact: ___________________________ Sales Contact: _______________________________ Line of Business: _________________________________________________ Year Established: ____________ Size of Business (Small/Large): _________________ Own/Rent/Lease: _________________________________ Pneumatic Power & Control Length of Time At Current Address: ______________________________ Number of Employees: ____________ Anticipated amount of monthly credit: ____________ Owner/President: _________________________________ Secretary: _________________________________ Treasurer: _______________________________________ Charge FL/GA State Sales Tax?: _________ Is Purchase Order required?: ____________ Trade Ref 1: Company Name: __________________________________ Contact: _______________________ Address: ___________________________ City: _________________________ State: ______ Zip: _________ Phone: __________________ Fax: ___________________ E-mail: ___________________________________ Trade Ref 2: Company Name: __________________________________ Contact: _______________________ Fluid Conveying Address: ___________________________ City: _________________________ State: ______ Zip: _________ Phone: __________________ Fax: ___________________ E-mail: ___________________________________ Trade Ref 3: Company Name: __________________________________ Contact: _______________________ Address: ___________________________ City: _________________________ State: ______ Zip: _________ Phone: __________________ Fax: ___________________ E-mail: ___________________________________
Payment Terms Our terms are Net 30 Days, meaning payment is due within 30 days from date of invoice. In case of default of payment, customers agree to collection and/or attorney fees not exceeding 30% of amount past due. Returned Material Policy We will normally accept returned material under the following conditions: 1. A copy of the invoice is furnished. 2. The material is returned within 30 days from date of invoice. 3. The material is in new resalable condition (unused, unpainted, etc.). 4. The material is normal stock for us (not special order). Returned material should be paid for when due. Restocking charges may apply. Retained Title / Warranty Our invoice contains a retained title and warranty as follows: The buyer hereby grants to Aero Hardware & Supply, Inc. a security interest in the equipment described in this invoice. To secure the debtor's payment for the equipment, title to said equipment shall remain in the seller until payment in full is made by the buyer. If the buyer defaults in such payment, the seller may declare all sums payable by the buyer hereunder immediately due payable and the seller may replevin the equipment and or exercise all of the rights and remedies of a secured party under the Uniform Commercial Code. Reasonable attorney's fees of the secured party in enforcing any right or exercising any remedy hereunder upon default of the buyer shall be paid to the seller by the buyer. Seller warrants for 90 days from the date of sale that the equipment sold, as described hereon, shall be free from defects in material and workmanship. Seller's liability under this warranty is limited to repair or replacement of any part or parts of said equipment which shall be returned to seller, shipping charged prepaid and which seller's examination discloses to its sole satisfaction to be defective. This is seller's only warranty. By accepting the equipment under this warranty, buyer acknowledges that said equipment is being sold under no other written or oral warranties, neither expressed or implied, of any kind whatsoever such as, but not necessarily limited to, warranty of merchantability of fitness. If you have any questions concerning our policy, please give us a call. Form date: 07/14/2006
(If no, please send us a signed Tax Certificate of Exemption)
Applicant's Signature: ______________________________ Applicant's Title: __________________________________
Date: ____________________ HSC Credit Fax Number: (954) 851-9865
71
Representative Lines
Hydraulic Power & Control Accumulators, Inc. Adaptall Aeroquip Air Logic AIRTEC Pneumatics Alemite Alkon Allied Witan American Couplings American Cylinder Anchor Brass Anchor Fluid Power Anderson Brass Apollo Aro (Ingersoll-Rand) Arrow Hose (Eaton) Ashcroft Attica Hydraulic Auburn Gear Ausco Products BSF Inc. Band-It Barco Barksdale Black Bruin Brennan Industries Boston Industrial Hose (Eaton) Brand Hydraulics Canfield Connector C.W. Mill Equipment Char-Lynn (Eaton) Concentric-Haldex Cross Manufacturing Cylinders & Valves Daman Products David Brown Delsteel Delta Power Hydraulic Deltrol Fluid Products Dill Tire Service Products Dixon Valve & Coupling DMIC Doering Company Durst Power Transmission ENFM Eaton Corporation Enerpac Europower Felsted Flexfab Flo-Ezy Filters Flo-Tork Fulflo Specialties Funk Mfg. Galtech Generant Company Georgia Hyd. Cylinders Haldex Hannay Reels HDM Hydraulics Hedland Products Helland (Zero-Max) Hercules Sealing Products Hetronic USA Hub City Husco Hyco Hydra-Zorb Hydreco Hypac Hypro Ingersoll-Rand / ARO Jefferson Solenoid Valves Kar-Tech Kawasaki Kinedyne Kocsis Technologies Kuriyama L & L Fittings Lantec Industries Lincoln Lube Linderme Copper Tubing Lion Lovejoy Lube Devices Magnaloy Coupling Marion Manufacturing Maurey Manufacturing Mazzer Industries Midway Manufacturing Mobil Oil Monarch Industries Muncie Power Products Oetiker Pacific Echo Parker / Republic Permco PowerTeam/SPX Pressure Devices Pullmaster Rawson-Koenig Winch Ray Snubbers Red Lion Reel Craft Industries SAI Hydraulics SLI (Control Enterprises) Snap Tite Spartan Scientific Speciality Fittings America SPX SSP Fittings SSP Instrumentation Staffa (Kawasaki) Stauff Stone/SPX Sun-Flow Synflex (Eaton) TR Engineering Telepneumatic (Parker) Terrell Gear Drives Thermal Transfer Tobul Accumulator Trident Marine Vector Engineering Vescor Vickers Voss Walterscheid (Eaton) Walvoil Ward Manufacturing Williams Controls Winner (Eaton) Winzeler Brass World Wide Fittings Zeromax / Helland
Fluid Conveying
Factory Authorized Repair Services

Manufacturer Alemite Char-Lynn Enerpac Hein-Werner SPX Power Team Stanley Vickers Service Program Service Center Service Center Service Center Service Center Service Center Warranty Repair Location, Handheld Tools and Railroad Tools QA Service Center
72
Locations
DISTRIBUTION CENTER - CUSTOMER SERVICE - TECHNICAL SUPPORT 24HOUR EMERGENCY SERVICE - CORPORATE OFFICES 300 International Parkway Sunrise, FL 33325 Tel: (800) 507-9651 Hours Fax: (954) 845-9113 Mon-Fri 8am-5pm
FLORIDA BRANCH LOCATIONS Belle Glade 326 S.E. 1st Street Belle Glade, FL 33430 Tel: 561-996-4431 Fax: 561-996-8531 Hours: Mon-Fri 7:30am-5pm Repair: Yes Clearwater 10851 49th Street N. Clearwater, FL 33762 Tel: 727-561-0254 Fax: 727-572-1689 Hours: Mon-Fri 7:30am-5pm Repair: No Daytona Beach 1757 N. Nova Road Holly Hill, FL 32117 Tel: 386-274-4617 Fax: 386-274-2759 Hours: Mon-Fri 8:00am-5pm Repair: No Ft. Lauderdale 2601 S.W. 2nd Avenue Ft. Lauderdale, FL 33315 Tel: 954-463-6460 Fax: 954-463-3635 Hours: Mon-Fri 7:30am-5pm Repair: Limited Sat 8am-12noon Ft. Myers 12900 Metro Parkway Ft. Myers, FL 33966 Tel: 239-274-9229 Fax: 239-274-0225 Hours: Mon-Fri 7:30am-5pm Repair: No Homestead 51 S.E. 3rd Terrace Florida City, FL 33034 Tel: 305-248-3713 Fax: 305-248-3742 Hours: Mon-Fri 8:00am-5pm Repair: No Jacksonville 30 South Lane Avenue Jacksonville, FL 32205 Tel: 904-783-4401 Fax: 904-781-9636 Hours: Mon-Fri 8:00am-5pm Repair: Yes Sat 8am-12noon Lakeland 3222 Winter Lake Rd. Bays 9-10 Lakeland, FL 33803 Tel: 863-665-3589 Fax: 863-665-3758 Hours: Mon-Fri 7:00am-5pm Repair: No Miami Springs 4301 N.W. 36th Street Miami Springs, FL 33166 Tel: 305-888-2415 Fax: 305-884-4066 Hours: Mon-Fri 7:30am-5pm Repair: Yes Sat 8am-12noon Naples 4376 Corporate Square Blvd #2 & #3 Naples, FL 34104 Tel: 239-435-1642 Fax: 239-643-2985 Hours: Mon-Fri 8:00am-5pm Repair: No Orlando 680 Montgomery Street Orlando, FL 32808 Tel: 407-295-4537 Fax: 407-291-9982 Hours: Mon-Fri 8:00am-5pm Repair: Yes Pompano 2600 W. Sample Rd. Pompano Beach, FL 33073 Tel: 954-973-5900 Fax: 954-973-4070 Hours: Mon-Fri 7:30am-5pm Repair: No Sat 8am-12noon Tampa 7200 Dr. Martin Luther King Jr. Blvd Tampa, FL 33619 Tel: 813-621-0790 Fax: 813-628-0667 Hours: Mon-Fri 7:30am-5pm Repair: Yes West Palm Beach 7680 Central Industrial Drive West Palm Beach, FL 33404 Tel: 561-863-6258 Fax: 561-863-6034 Hours: Mon-Fri 7:30am-5pm Repair: Yes
Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
73
Locations
GEORGIA BRANCH LOCATIONS TENNESSEE BRANCH LOCATIONS Atlanta (Forest Park) 937 Forest Parkway Forest Park, GA 30297 Tel: 404-608-0995 Fax: 404-608-1055 Hours: Mon-Fri 8:00am-5pm Repair: No Sat 8am-12noon Atlanta (Mableton) 6310 Mableton Parkway Suite 100 Mableton, GA 30126 Tel: 678-398-6673 Fax: 678-398-6817 Hours: Mon-Fri 8:00am-5pm Repair: No Atlanta (Marietta) 1200 Cobb Parkway N, Suite 500 Marietta, GA 30062 Tel: 678-290-9227 Fax: 678-290-9265 Hours: Mon-Fri 8:00am-5:00pm Repair: No Augusta 2722 Mike Padgett Hwy, Lot A Augusta, GA 30906 Tel: 706-790-0628 Fax: 706-790-7043 Hours: Mon-Fri 8:00am-5pm Repair: No Columbus 6440 West Hamilton Park Drive, Suite J Columbus, GA 31904 Tel: 706-322-0707 Fax: 706-322-7430 Hours: Mon-Fri 8:00am-5pm Repair: No Savannah 1370 US Hwy 80 East Suites I & J Pooler, GA 31322 Tel: 912-965-6771 Fax: 912-965-9219 Hours: Mon-Fri 7:30am-5pm Repair: No Chattanooga Shallowford Business Park 5959 Shallowford Rd. Suite 111 Chattanooga, TN 37421 Tel: 423-553-8854 Fax: 423-553-8995 Hours: Mon-Fri 8:00am-5pm Repair: No Sat 8am-12noon
Fluid Conveying
74
Locations
Hydraulic Power & Control SUNRISE, FL 300 International Parkway Sunrise, FL 33325 Tel: 800-507-9651 954-453-8148 BELLE GLADE, FL 326 S.E. 1st Street Belle Glade, FL 33430 Tel: 561-996-4431
CLEARWATER, FL 10851 49th Street N. Clearwater, FL 33762 Tel: 727-561-0254
Fluid Conveying Miscellaneous Products Indexes & Technical Information
75
Locations
Hydraulic Power & Control DAYTONA BEACH, FL (Eaton Hydraulic Center) 1757 N. Nova Road Holly Hill, FL 32117 Tel: 386-274-4617 FT. LAUDERDALE, FL 2601 S.W. 2nd Ave. Ft. Lauderdale, FL 33315 Tel: 954-463-6460
Fluid Conveying
FT. MYERS, FL 12900 Metro Parkway Ft. Myers, FL 33966 Tel: 239-274-9229
76
Locations
Hydraulic Power & Control HOMESTEAD, FL 51 S.E. 3rd Terrace Florida City, FL 33034 Tel: 305-248-3713 JACKSONVILLE, FL 30 South Lane Ave. Jacksonville, FL 32205 Tel: 904-783-4401
LAKELAND, FL (Aeroquip Express) 3222 Winter Lake Rd. Lakeland, FL 33803 Tel: 863-665-3589
77
Locations
Hydraulic Power & Control MIAMI SPRINGS, FL 4301 N.W. 36th Street Miami Springs, FL 33166 Tel: 305-888-2415 ORLANDO, FL 680 Montgomery Street Orlando, FL 32808 Tel: 407-295-4537
Fluid Conveying
NAPLES, FL 4376 Corporate Square Blvd #2 & #3 Naples, FL 34104 Tel: 239-435-1642
POMPANO, FL 2600 W. Sample Rd. Pompano Beach, FL 33073 Tel: 954-973-5900
78
Locations
Hydraulic Power & Control TAMPA, FL 7200 Dr. Martin Luther King Jr. Blvd. Tampa, FL 33619 Tel: 813-621-0790 WEST PALM BEACH, FL 7680 Central Industrial Drive West Palm Beach, FL 33404 Tel: 561-863-6258
ATLANTA, GA (Forest Park) 937 Forest Parkway Forest Park, GA 30297 Tel: 404-608-0995
79
Locations
Hydraulic Power & Control ATLANTA, GA (Mableton) (Aeroquip Express Store) 6310 Mableton Parkway Suite 100 Mableton, GA 30126 Tel: 678-398-6673
Fluid Conveying
ATLANTA, GA (Marietta) (Aeroquip Express Store) 1200 Cobb Parkway N Suite 500 Marietta, GA 30062 Tel: 678-290-9227
80
Locations
Hydraulic Power & Control AUGUSTA, GA (Eaton Hydraulic Center) 2722 Mike Padgett Hwy, Lot A Augusta, GA 30906 Tel: 706-790-0628 COLUMBUS, GA 6440 West Hamilton Park Drive, Suite J Columbus, GA 31904 Tel: 706-322-0707
81
Locations
Hydraulic Power & Control SAVANNAH, GA 1370 US Hwy 80 Suites I & J Pooler, GA 31322 Tel: 912-965-6771
Fluid Conveying
CHATTANOOGA, TN Shallowford Business Park 5959 Shallowford Rd. Suite 111 Chattanooga, TN 37421 Tel: 423-553-8854
82

Category Page Hydraulic Power & Control Hydraulic Pumps & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Foot Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Water Pump Strainers, Skimmers, Foot Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Hydraulic Motors & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Hydraulic Motors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Overhung Load Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Hydrostatic Transmissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Hydraulic Cylinders & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Steering Units & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Hydraulic Valves & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Hydraulic Filters & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341 Power Units & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Hydraulic System Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Accumulators & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Gauge Accessories (Snubbers, Boots). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Geared Flow Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392 Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394 Pressure Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 High Force Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Enerpac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Power Team . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
83
Pumps & Accessories

Hydraulic Power & Control Category Page Single Hydraulic Pumps Fixed Displacement (Vane) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Vickers V10/V10F & V20/V20F Vane Pumps (To 19.5 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . . . . . . . . . 86 Vickers V Series Vane Pumps (To 90 GPM @ 1800 RPM. Low Noise, 1800 RPM Capability) . . . . . . . . . 94 Vickers VQ Series Vane Pumps (To 90 GPM @ 1800 RPM. High Speed / High Pressure Capability) . . . 95 Miscellaneous Single & Tandem Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Fixed Displacement (Gear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Haldex Barnes W900 Series (To 13 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Hydreco 1500K Series (To 22 GPM @ 1800 RPM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Hydreco 1500M Series (To 19 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Eaton Series 26 (To 24 GPM @ 1800 RPM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Eaton Series L2 (To 26 GPM @ 1800 RPM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Permco Box Pumps (PTO Pumps) (To 46 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Miscellaneous Single Gear Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Variable Displacement (Piston) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Vickers PVE Series Piston Pumps (To 21 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Vickers PVQ Series Piston Pumps (To 30 GPM @ 1800 RPM. Low Noise, 1800 RPM Capability) . . . . . 110 Eaton Medium Duty Piston Pumps (To 32 GPM @ 1800 RPM. High Speed / High Pressure) . . . . . . . . . . 112 Eaton 420 Series Mobile Piston Pumps (To 38 GPM @ 1800 RPM. High Speed / High Pressure) . . . . . . 114 Double Hydraulic Pumps Fixed Displacement (Vane) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Vickers V2010 Series Double Vane Pumps (To 19.5 GPM/10.5 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . 116 Miscellaneous Double Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Fixed Displacement (Gear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Miscellaneous Double Gear Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Dump Pumps Permco DM400 Series Dump Pumps (To 21.5 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Permco DMD/DM640 Series Dump Pumps (To 46 GPM @ 1800 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Refuse Pump System Permco Versa-Pak System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Power Steering Pumps Vickers VTM-42 Power Steering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Hand Pumps Doering Series 241 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Integrated Hydraulics 1HP7 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Air-Operated Diaphragm Pumps Aro Diaphragm Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Centrifugal Pumps Hypro Centrifugal Pumps For Agricultural Spray Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Pump Accessories Foot Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Water Pump Strainers, Skimmers, Foot Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Technical Information, Performance, Dimensions, Model Codes Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438 Vickers Vane Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438 Vickers V10 & V20 Series Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 Vickers V2010 Series Double Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443 Vickers V Series Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444 Vickers VQ Series Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448 Gear Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453 Haldex Barnes W900 Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453 Hydreco 1500K Series Gear Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
Fluid Conveying
84
Pumps & Accessories

Category Page 456 458 459 460 461 462 463 463 464 465 469 471 473 473 Hydraulic Power & Control Hydreco 1500M Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton Series 26 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton Series L2 Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permco Box Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permco DM400 Series Dump Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permco DMD/DM640 Series Dump Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piston Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton Medium Duty Piston Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton 420 Series Mobile Piston Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers PVB Series Piston Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers PVH Series Piston Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers PVQ Series Piston Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diaphragm Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Air-Operated Non-Metallic Diaphragm Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
85
Pumps & Accessories

Single Hydraulic Pumps Fixed Displacement Vickers V10 Series Vane Pumps To 10.5 GPM @ 1800 RPM
Vickers V10 Vane Pumps

Unless noted otherwise, all pumps have: 2-Bolt SAE A Mounting Flange. 1" NPT Inlet, 1/2" NPT Outlet. Application Information: page 438 Specifications: page 439 Model Codes: page 440 Dimensions: page 441 Replacement Parts: page 86 Foot Brackets: page 130
Pumps are stocked as shown in table. ANY inlet position and rotation is available for same-day shipment. See Model Codes page to select a different model code.
Vickers Part Catalog No. See Vickers Model See Part No. Note Above Note Above C1BM57 375655-3 C1BM72 382075-3 C1HZ51 C1JZ50 382063-7 382077-1 V10-1P1P-1C20 V10-1P2P-1C20 V10-1S2S-1C20-L H (1-5/16-12 Inlet 3/4-16 Outlet) V10-1P3P-1A20 V10-1P3P-1C20 V10-1P4P-1C20 V10-1P5P-1C20 V10-1S5S-1C20 (1-5/16-12 Inlet 3/4-16 Outlet) V10-1P6P-1C20 V10-1P7P-1C20 Ring Size 1200 Displ RPM 0.2 0.4 0.4 0.6 0.6 0.8 1.0 1.0 1.19 1.39 0.8 01 02 02 03 03 04 05 05 06 07 04 Flow GPM 1800 RPM 1.50 3 3 4.5 4.5 6 7.5 7.5 9 10.5 6 Outlet Position In-line with inlet (C) In-line with inlet (C) Max. PSI & Max. RPM 2500 PSI 4800 RPM 2500 PSI 4500 RPM Price Each
Fluid Conveying
Shaft 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed
Rot. CW CW
Wt. 10.58 10.52 10.58 10.60 10.52 11.07 11.07 10.95 11.54 11.42 10.84
In-line with 2500 PSI CCW 4500 RPM inlet (C) Opposite inlet (A) In-line with inlet (C) In-line with inlet (C) In-line with inlet (C) In-line with inlet (C) In-line with inlet (C) In-line with inlet (C) CW CW CW CW CW CW CW 2500 PSI 4000 RPM 2500 PSI 4000 RPM 2500 PSI 3400 RPM 2500 PSI 3200 RPM 2500 PSI 3200 RPM 2200 PSI 3000 RPM 2000 PSI 2800 RPM
C1BM73 382077-3 C1BM74 382082-3 C1BM75 382084-3 C1BM71 382074-3 C1BM76 382086-3 C1EH14 382087-3 C1JM27 390099-7
V10-1S4S-11C20-L H (1-5/16-12 Inlet 9 Tooth SAE A Splined 3/4-16 Outlet)
In-line with CCW 2500 PSI inlet (C) 3400 RPM
Note: Flow: GPM @ 1800 RPM & 100 PSI. Displacement: Cubic inches per revolution. Max PSI & Max RPM based on using petroleum oil at 120F / 100SUS and at 0 PSI inlet pressure. Min Speed: 600 RPM.
Vickers Part No. 375655-3 382075-3
Vickers Model V10-1P1P-1C20 V10-1P2P-1C20
Ring Size 01 02
Cartridge Kit 923471 923470
Shaft 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed
Shaft Key Shaft Seal 142843 142843 263585 263585
Seal Kit 923548 923548
86
Pumps & Accessories

Vickers Part No. 382063-7 382077-1 382077-3 382082-3 Ring Size 02 03 03 04 05 05 06 07 04
Vickers Model V10-1S2S-1C20-LH V10-1P3P-1A20 V10-1P3P-1C20 V10-1P4P-1C20 V10-1P5P-1C20 V10-1S5S-1C20 V10-1P6P-1C20 V10-1P7P-1C20 V10-1S4S-11C20-LH
Cartridge Kit 923470 923496 923496 02-341777 02-341778 923468 923497 02-341780 923469
Shaft 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed 374338 3/4"-Straight-Keyed 374339 9Tooth-SAE-A-Splined
Shaft Key Shaft Seal 142843 142843 142843 142843 142843 142843 142843 142843 -263585 263585 263585 263585 263585 263585 263585 263585 263585
Seal Kit 923548 923548 923548 923548 923548 923548 923548 923548 923548
382084-3 382074-3 382086-3 382087-3 390099-7
Vickers V10 Vane Pumps Replacement Parts List

Catalog Part No. C1JZ38 C1CC33 C1CC32 C1CC35 Part Number 374343 923471 923470 923496 Pressure Plate Sub Assy Bearing Cartridge Kit, Ring Size 01 Cartridge Kit, Ring Size 02 Cartridge Kit, Ring Size 03 Cartridge Kit, Ring Size 04 Cartridge Kit, Ring Size 05 Cartridge Kit, Ring Size 06 Cartridge Kit, Ring Size 07 Pin for Pumps with Ring Size 01 02 03 Pin for Pumps with Ring Size 04 05 Pressure Plate Sub Assy Screw for Pumps with Ring Size 01 02 03 Seal Kit, Buna-N #1 Shaft, 3/4" Straight Keyed #11 Shaft, 9Tooth SAE A Splined #12 Shaft, 13 Tooth SAE B Splined Shaft Key, 3/16 x 1 Shaft Seal, Buna-N Description Wt. 0.67 0.16 1.31 1.33 1.30 1.82 1.79 2.23 2.20 0.01 0.15 0.67 0.11 0.04 0.43 0.32 0.44 0.01 0.02 Price Each
Fluid Conveying
C1AK63 148423
C1CC31 923469 C1CC30 923468 C1CC36 923497 002460 039640 374343 011156 374338 C1CC37 923498 C1AB15 C1AD66 C1JZ38 C1AB92 C1BM54
C1CC38 923548 C1BM55 374339 C1BM56 375480 C1AK61 142843 C1BH93 263585
87
Pumps & Accessories

Single Hydraulic Pumps Fixed Displacement Vickers V10F Series Vane Pumps To 10.5 GPM @ 1800 RPM
Vickers V10F Vane Pumps Flow Control Cover

The Flow Control Cover limits flow to the operating system to the desired maximum. Excess flow is diverted to tank. A relief valve is included that limits maximum system pressure. Unless noted otherwise, all pumps have: 2-Bolt SAE A Mounting Flange. 1" NPT Inlet, 3/4-16 St.Thd. Outlet, 1/2" NPT Tank. Application Information: page 438 Specifications: page 439 Model Codes: page 440 Dimensions: page 441 Replacement Parts: page 88 Foot Brackets: page 130
Vickers Part Catalog No. See Part No. Note Above C1BW18 591151-3 Vickers Model See Note Above V10F-1P4P-1C4D20 Ring Flow Size Rate & 1200 Relief Displ RPM Setting 0.80 0.80 0.80 0.80 04 04 04 04 Outlet Position Max. PSI & Rot. Max. RPM Wt. 2500 PSI 3400 RPM 12.75 2500 PSI 3400 RPM 12.75 2500 PSI 12.67 3400 RPM 2500 PSI 12.32 3400 RPM Price Each
Fluid Conveying
Shaft 3/4 Straight Keyed 3/4 Straight Keyed 9 Tooth SAE A Splined 9 Tooth SAE A Splined
4.0 GPM In-line with 1000 PSI inlet (C) CW 4.0 GPM Opposite 1250 PSI inlet (A) 4.0 GPM Opposite 1000 PSI inlet (A) 4.0 GPM Opposite 1250 PSI inlet (A) CW CW CW
V10F-1S4T-1A4E20 C1EW17 02-466580-1 (SAE-16 inlet, SAE-8 outlet & tank) C1AD43 02-306253-1 C1HH50 V10F-1P4P-11A4D20
V10F-1S4T-11A4E-20 02-466554-1 (SAE-16 inlet, SAE-8 outlet & tank)
Flow Rate: Orifice Flow Rate (GPM). Non-adjustable pressure compensated fixed orifice in rear cover. Relief Setting: Non-adjustable replaceable cartridge. Displacement: Cubic inches per revolution. Max. PSI & Max. RPM: Based on using petroleum oil at 120F / 100SUS and at 0 PSI inlet pressure. Minimum Speed: 600 RPM.
Vickers Part No. 591151-3
Vickers Model V10F-1P4P-1C4D20
Ring Size 04 04 04 04
Cartridge Kit 02-341777 923469 02-341777 02-341777
Shaft 374338 3/4"-Straight-Keyed R923469 374339 9Tooth-SAE-A-Splined 374339 9Tooth-SAE-A-Splined
Shaft Key Shaft Seal 142843 374338 3/4"-Straig ht-Keyed --263585 142843 263585 263585
Seal Kit 923548 263585 923548 923548
02-466580-1 V10F-1S4T-1A4E-20 02-306253-1 V10F-1P4P-11A4D20 02-466554-1 V10F-1S4T-11A4E-20
88
Pumps & Accessories

Vickers V10F Vane Pumps Replacement Parts List
Catalog Part No. C1CC33 C1CC32 C1CC35 Part Number 923471 923470 923496 Cartridge Kit, Ring Size 01 Cartridge Kit, Ring Size 02 Cartridge Kit, Ring Size 03 Cartridge Kit, Ring Size 04 Cartridge Kit, Ring Size 05 Cartridge Kit, Ring Size 06 Cartridge Kit, Ring Size 07 Pressure Plate Sub Assy Seal Kit, Buna-N Shaft Seal, Buna-N #1 Shaft, 3/4" Straight Keyed #11 Shaft, 9Tooth SAE A Splined #12 Shaft, 13Tooth SAE B Splined #38 Shaft, 11 Tooth Splined Shaft Key, 3/16 x 1 Description Wt. 1.31 1.33 1.30 1.82 1.79 2.23 2.20 0.67 0.04 0.02 0.43 0.32 0.44 0.35 0.01 Price Each
C1CC31 923469 C1CC30 923468 C1CC36 923497 374343 C1CC37 923498 C1JZ38 C1CC38 923548 C1BH93 263585 C1BM54 374338 C1BM55 374339 C1BM56 375480 C1EH16 387481 C1AK61 142843
Fluid Conveying
89
Pumps & Accessories


Unless noted otherwise, all pumps have: 2-Bolt SAE A Mounting Flange. 1-1/4" NPT Inlet, 3/4" NPT Outlet. Application Information: page 438 Specifications: page 439 Model Codes: page 440 Dimensions: page 442 Replacement Parts: page 90 Foot Brackets: page 130
Vickers Part Catalog No. See Vickers Model See Part No. Note Above Note Above C1JZ31 C1BM50 372613-1 372613-3 V20-1P6P-1A11 V20-1P6P-1C11 V20-1P7P-1C11 V20-1P8P-1A11 V20-1P8P-1C11 V20-1P9P-1A11 V20-1P9P-1C11 V20-1P11P-1C11 V20-1P12P-1C11 Ring Size 1200 Displ RPM 1.19 1.19 1.39 1.62 1.62 1.81 1.81 2.22 2.38 2.59 2.59 06 06 07 08 08 09 09 11 12 13 13 Flow GPM 1800 RPM 9 9 10.5 12 12 13.5 13.5 16.5 18 19.5 19.5 Outlet Position Opposite inlet (A) In-line with inlet (C) In-line with inlet (C) Opposite inlet (A) In-line with inlet (C) Opposite inlet (A) In-line with inlet (C) In-line with inlet (C) In-line with inlet (C) Max. PSI & Max. RPM 2500 PSI 3400 RPM 2500 PSI 3400 RPM 2500 PSI 3000 RPM 2500 PSI 2800 RPM 2500 PSI 2800 RPM 2500 PSI 2800 RPM 2500 PSI 2800 RPM 2500 PSI 2500 RPM 2200 PSI 2400 RPM Price Each
Fluid Conveying
Shaft 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed 3/4 Straight Keyed
Rot. CW CW CW CW CW CW CW CW CW
Wt. 15.81 15.47 16.65 16.66
C1BN18 394450-3 C1JZ34 372639-1
C1BM52 372639-3 C1JZ17 358357-1
16.57 16.79 16.62 17.36 17.99 17.70 18.05
C1BM45 358357-3 C1BM51 372617-3 C1BN17 393723-3 C1KK80 C1BM49
720AR00236 V20-1P13S-38C11 11 Tooth Splined 3/4 A L-063 OD 372606-3 V20-1P13P-1C11 3/4 Straight Keyed
In-line with CCW 2200 PSI inlet (C) 2400 RPM In-line with inlet (C) CW 2200 PSI 2400 RPM
Flow: GPM @ 1800 RPM and 100 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. RPM: Based on using petroleum oil at 120F / 100SUS and at 0 PSI inlet pressure. Minimum Speed: 600 RPM.
Vickers Part No. 372613-1 372613-3
Vickers Model V20-1P6P-1A11 V20-1P6P-1C11
Ring Size 06 06
Cartridge Kit 02-137560 02-137560
Shaft 280372 3/4"-Straight-Keyed 280372 3/4"-Straight-Keyed
Shaft Key Shaft Seal 005881 005881 229235 229235
Seal Kit 922733 922733
90
Pumps & Accessories

Vickers Part No. 394450-3 372639-1 372639-3 358357-1
Vickers Model V20-1P7P-1C11 V20-1P8P-1A11 V20-1P8P-1C11 V20-1P9P-1A11 V20-1P9P-1C11 V20-1P11P-1C11 V20-1P12P-1C11
Ring Size 07 08 08 09 09 11 12 13 13
Cartridge Kit 02-137561 02-137562 02-137562 02-137563 02-137563 02-137565 02-137566 02-137567 02-137567
Shaft 280372 3/4"-Straight-Keyed 280372 3/4"-Straight-Keyed 280372 3/4"-Straight-Keyed 280372 3/4"-Straight-Keyed 280372 3/4"-Straight-Keyed 280372 3/4"-Straight-Keyed 280372 3/4"-Straight-Keyed 328096 11Tooth-Splined Shorter 280372 3/4"-Straight-Keyed
Shaft Key Shaft Seal 005881 005881 005881 005881 005881 005881 005881 -005881 229235 229235 229235 229235 229235 229235 229235 229235 229235
Seal Kit 922733 922733 922733 922733 922733 922733 922733 922733 922733
358357-3 372617-3 393723-3
720AR00236 V20-1P13S-38C11L-0 A 63 372606-3 V20-1P13P-1C11
Vickers V20 Vane Pumps Replacement Parts List

Catalog Part No. C1JC28 C1AC75 C1EG52 C1EG53 C1AC76 C1EG54 C1AC77 C1AC78 C1AC79 C1AA88 C1AB16 C1AB97 C1AB64 C1AB64 C1JZ18 C1JC15 C1AA64 C1AB36 Part Number 02-137559 02-137560 02-137561 02-137562 02-137563 02-137564 02-137565 02-137566 02-137567 002161 002478 016662 009603 009603 359287 001318 001319 005881 280372 280515 Cartridge Kit, Ring Size 05 Cartridge Kit, Ring Size 06 Cartridge Kit, Ring Size 07 Cartridge Kit, Ring Size 08 Cartridge Kit, Ring Size 09 Cartridge Kit, Ring Size 10 Cartridge Kit, Ring Size 11 Cartridge Kit, Ring Size 12 Cartridge Kit, Ring Size 13 Pin for Pumps with Ring Size 05 06 Pin for Pumps with Ring Size 07 08 09 10 Pin for Pumps with Ring Size 10 11 Pin for Pumps with Ring Size 12 13 Pin for Pumps with Ring Size 12 13 Pressure Plate Sub Assy, Includes 280267 Bushing Screw for Pumps with Ring Size 07 08 09 10 11, 4 required Screw for Pumps with Ring Size 12 13 Seal Kit, Buna-N Shaft Key, 3/16 x 1-5/8 #1 Shaft, 3/4" Straight Keyed Shaft Seal, Buna-N #11 Shaft, #11, 11Tooth Splined, Extended Length #38 Shaft, #38, 11Tooth Splined, Shorter Length Description Wt. 2.66 8.00 3.56 3.58 1.00 4.56 5.00 4.93 2.00 0.01 0.01 0.02 0.01 0.01 1.18 0.19 0.20 0.08 0.02 0.76 0.75 0.75 0.56 Price Each
Fluid Conveying
C1CB91 922733 C1BJ77 C1BJ78
C1BD92 229235 C1BM14 328096
91
Pumps & Accessories


The Flow Control Cover limits flow to the operating system to the desired maximum. Excess flow is diverted to tank. A relief valve is included that limits maximum system pressure. Unless noted otherwise, all pumps have: 2-Bolt SAE A Mounting Flange. 1-1/4" NPT Inlet, 3/4-16 St.Thd. Outlet, 1/2" NPT Tank. Application Information: page 438 Specifications: page 439 Model Codes: page 440 Dimensions: page 442 Replacement Parts: page 92 Foot Brackets: page 130
Vickers Part Catalog No. See Vickers Model See Note Part No. Note Above Above C1FH73 C1AC90 C1EL14 02-141809-5 V20F-1P11P-38A8H-22L 02-142388-7 02-142388-4 V20F-1P13P-38C6H22 V20F-1P13P-38D6H22 Ring Flow Size Rate & 1200 Relief Displ RPM Setting 2.22 2.59 2.59 11 13 13 Outlet Position Max. PSI & Max. RPM Price Each
Fluid Conveying
Shaft 11 Tooth .590 Dia Shorter Length 11 Tooth .590 Dia Shorter Length 11 Tooth .590 Dia Shorter Length 11 Tooth .590 Dia Shorter Length 11 Tooth .590 Dia Shorter Length
Rot.
Wt.
8.0 GPM Opposite 2500 PSI 2000 PSI inlet (A) CCW 2500 RPM 21.47 6.0 GPM In-line with 2000 PSI inlet (C) 6.0 GPM 90 Deg. 2000 PSI CW from inlet (D) 90 Deg. 8.0 GPM CW from 2000 PSI inlet (D) CW CW 2200 PSI 21.98 2400 RPM 2200 PSI 2400 RPM 22.13 2200 PSI 22.51 2400 RPM
C1ER98 C1ZZ86
02-141854-4
V20F-1P13P-38D8H22
2.59 2.59
13 13
CW
02-141854-7 V20F-1P13P-38C8H22L
8.0 GPM In-line with 2200 PSI 2000 PSI inlet (C) CCW 2400 RPM 22.55
Flow Rate: Orifice Flow Rate (GPM). Non-adjustable pressure compensated fixed orifice in rear cover. Relief Setting: Non-adjustable replaceable cartridge. Displacement: Cubic inches per revolution. Max. PSI & Max. RPM: Based on using petroleum oil at 120F / 100SUS and at 0 PSI inlet pressure. Minimum Speed: 600 RPM.
Vickers Part No.
Vickers Model
Ring Size 11 13 13
Cartridge Kit 02-137565 02-137567 02-137567
Shaft 328096 11Tooth-Splined Shorter 328096 11Tooth-Splined Shorter 328096 11Tooth-Splined Shorter
Shaft Key Shaft Seal ---229235 229235 229235
Seal Kit 922733 922733 922733
02-141809-5 V20F-1P11P-38A8H-22L 02-142388-7 V20F-1P13P-38C6H22 02-142388-4 V20F-1P13P-38D6H22
92
Pumps & Accessories

Vickers Part No. Ring Size 13 13
Vickers Model
Cartridge Kit 02-137567 02-137567
Shaft 328096 11Tooth-Splined Shorter 328096 11Tooth-Splined Shorter
Shaft Key Shaft Seal --229235 229235
Seal Kit 922733 922733
02-141854-4 V20F-1P13P-38D8H22 02-141854-7 V20F-1P13P-38C8H22L
Vickers V20F Vane Pumps Replacement Parts List

Catalog Part No. Part Number 02-137559 02-137560 02-137561 02-137562 02-137563 02-137564 02-137565 02-137566 02-137567 009603 359287 005881 280372 294922 280515 Cartridge Kit, Ring Size 05 Cartridge Kit, Ring Size 06 Cartridge Kit, Ring Size 07 Cartridge Kit, Ring Size 08 Cartridge Kit, Ring Size 09 Cartridge Kit, Ring Size 10 Cartridge Kit, Ring Size 11 Cartridge Kit, Ring Size 12 Cartridge Kit, Ring Size 13 Pin for Pumps with Ring Size 12 13 Pressure Plate Sub Assy, Includes 280267 Bushing Seal Kit, Buna-N Shaft Key, 3/16 x 1-5/8 #1 Shaft, 3/4" Straight Keyed Shaft Seal, Buna-N #15 Shaft, 13 Tooth Splined #38 Shaft, 11Tooth Splined, Shorter Length #11 Shaft, 11Tooth Splined Extended Length Description Wt. 2.66 8.00 3.56 3.58 1.00 4.56 5.00 4.93 2.00 0.01 1.18 0.08 0.02 0.76 0.75 0.65 0.56 0.75 Price Each
C1JC28 C1AC75 C1EG52 C1EG53 C1AC76 C1EG54 C1AC77 C1AC78 C1AC79 C1AB64 C1JZ18 C1AB36 C1BJ77 C1BJ92 C1BJ78
C1CB91 922733
Fluid Conveying
C1BD92 229235 C1BM14 328096
93
Pumps & Accessories

Single Hydraulic Pumps Fixed Displacement Vickers 25V Series Vane Pumps To 31.5 GPM @ 1800 RPM
Vickers 25V Vane Pumps For Industrial Applications Low Noise / 1800 RPM Capability
Unless noted otherwise, all pumps have: 2-Bolt SAE B Mounting Flange. SAE 4-Bolt Flange Ports: 1-1/2" Inlet, 1" Outlet. Application Information: page 438 Specifications: page 444 Model Codes: page 445 Dimensions: page 446 Replacement Parts: page 94 Port Flange Kits: Flanges page 1085 Foot Brackets: page 130
Vickers 25V Vane Pumps For Industrial Applications Low Noise / 1800 RPM Capability
Vickers Part Catalog No. See Vickers Model See Part No. Note Above Note Above C1EG35 02-137117-3 25V21A-1C22R Ring Size 1200 Displ RPM 4.13 21 Flow GPM 1800 RPM 31.5
Fluid Conveying
Shaft 7/8 Straight Keyed
Outlet Position Inline with inlet (C)
Rot. CW
Max. PSI & Max. RPM 2500 PSI 1800 RPM
Wt. 32.12
Price Each
Vickers Part No.
Vickers Model
Ring Size 21
Cartridge Kit 02-102535
Shaft 238755 7/8"-Straight-Keyed
Shaft Key Shaft Seal 009955 394976
Seal Kit 922850
02-137117-3 25V21A-1C22R
Vickers 25V Vane Pumps Replacement Parts List

Catalog Part No. C1AC23 C1DU27 C1BF31 C1EF55 C1EG72 C1DU27 C1AM34 Part Number 02-102535 009955 238929 238755 191400 009955 190362 Seal Kit, Buna-N Shaft Key, 3/16 x 1-1/4 Shaft Seal, Buna-N #11 Shaft, 13Tooth SAE B Splined #1 Shaft, 7/8" Straight Keyed Spirolox Ring Key for #1 Shaft Retainer Description Cartridge Kit, Ring Size 21, CW Rotation Wt. 8.06 0.08 0.01 0.03 1.18 1.31 0.01 0.01 0.02 Price Each
C1CB92 922850 C1BN21 394976
94
Pumps & Accessories

Single Hydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 31.5 GPM @ 1800 RPM
Vickers 25VQ Vane Pumps For Mobile Applications High Pressure / High Speed Capability
Unless noted otherwise, all pumps have: 2-Bolt SAE B Mounting Flange. SAE 4-Bolt Flange Ports: 1-1/2" Inlet, 1" Outlet. Application Information: page 438 Specifications: page 448 Model Codes: page 449 Dimensions: page 450 Replacement Parts: page 95 Port Flange Kits: Flanges page 1085 Foot Brackets: page 130
Vickers Part Catalog No. See Vickers Model See Part No. Note Above Note Above C1EH21 C1BP69 C1BP59 417993-3 417992-3 416457-3 421475-3 421477-3 25VQ14A-1C20 25VQ17A-1C20 25VQ21A-1C20 Ring Size 1200 Displ RPM 2.77 3.37 4.12 14 17 21 17 21 Flow GPM 1800 RPM
Fluid Conveying
Shaft 7/8 Straight Keyed 7/8 Straight Keyed 7/8 Straight Keyed
Outlet Position
Rot. CW CW CW CW CW
Max. PSI & Max. RPM 3000 PSI 2700 RPM 3000 PSI 2500 RPM 3000 PSI 2500 RPM 3000 PSI 2500 RPM 3000 PSI 2500 RPM
Wt. 31.57 30.53 40.00 31.10 31.32
Price Each
with 21.5 In-line inlet (C) 25.5 31.5 In-line with inlet (C) In-line with inlet (C)
C1EH28 C1BP80
25VQ17A-11C20 13 Tooth SAE B Splined 3.37 25VQ21A-11C20 13 Tooth SAE B Splined 4.12
25.5 In-line with inlet (C) 31.5 In-line with inlet (C)
Vickers Part No. 417993-3 417992-3 416457-3 421475-3 421477-3
Vickers Model 25VQ14A-1C20 25VQ17A-1C20 25VQ21A-1C20 25VQ17A-11C20 25VQ21A-11C20
Ring Size 17 17 21 17 21
Cartridge Kit 416441 416441 416442 416441 416442
Shaft 238755 7/8"-Straight-Keyed 238755 7/8"-Straight-Keyed 238755 7/8"-Straight-Keyed 238929 13Tooth-SAE-B-Splined 238929 13Tooth-SAE-B-Splined
Shaft Key Shaft Seal 009955 009955 009955 --394976 394976 394976 394976 394976
Seal Kit 920021 920021 920021 920021 920021
95
Pumps & Accessories

Single Hydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 31.5 GPM @ 1800 RPM
Vickers 25VQ Vane Pumps Replacement Parts List
Catalog Part No. C1EH19 C1BP57 C1BP58 C1EH20 C1DU27 C1BF31 C1EF55 C1EG72 C1AJ46 C1DU27 Part Number 416439 416440 416441 416442 009955 238929 238755 191400 120128 009955 Description Cartridge Kit, Ring Size 12, CW Rotation Cartridge Kit, Ring Size 14, CW Rotation Cartridge Kit, Ring Size 17, CW Rotation Cartridge Kit, Ring Size 21, CW Rotation Seal Kit, Buna-N Shaft Key, 3/16 x 1-1/4 Shaft Seal, Buna-N #11 Shaft, 13Tooth SAE B Splined #1 Shaft, 7/8" Straight Keyed Spirolox Ring Snap Ring Key for #1 Shaft Wt. 8.09 8.02 8.01 7.94 0.11 0.01 0.03 1.18 1.31 0.01 0.01 0.01 Price Each
C1CB84 920021 C1BN21 394976
96
Pumps & Accessories

Single Hydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 57 GPM @ 1800 RPM
Unless noted otherwise, all pumps have: 2-Bolt SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 2" Inlet, 1-1/4" Outlet. Application Information: page 438 Specifications: page 448 Model Codes: page 449 Dimensions: page 451 Replacement Parts: page 97 Port Flange Kits: Flanges page 1085 Foot Brackets: page 130
Vickers Part Catalog No. See Vickers Model See Part No. Note Above Note Above C1EH32 421529-3 35VQ38A-1C20 Ring Size 1200 Displ RPM 7.42 38 Flow GPM 1800 RPM 57
Fluid Conveying
Shaft 1-1/4 Straight Keyed
Outlet Position Inline with inlet (C)
Rot. CW
Max. PSI & Max. RPM 3000 PSI 2400 RPM
Wt. 49.20
Price Each
Vickers Model 35VQ38A-1C20
Ring Size 38
Cartridge Kit 413419
Shaft 233624 1-1/4" Keyed
Shaft Key Shaft Seal 088678 394973
Seal Kit 920015

Catalog Part No. C1KA17 C1BP46 C1DX24 Part Number 413420 413421 413422 413418 413419 Cartridge Kit, Ring Size 21 Cartridge Kit, Ring Size 25, CW Rotation Cartridge Kit, Ring Size 30, CW Rotation Cartridge Kit, Ring Size 35, CW Rotation Cartridge Kit, Ring Size 38, CW Rotation Front Bearing Seal Kit, Buna-N #1 Shaft, 1-1/4" Straight Keyed #11 Shaft, 14Tooth SAE C Splined Shaft Key, 5/16 x 1-1/2 Shaft Seal, Double Shaft Seal Models Only Shaft Seal, Buna-N Spirolox Ring Description Wt. 14.00 14.00 13.85 13.77 13.75 0.50 0.13 2.39 2.13 0.04 0.04 0.07 0.02 Price Each
C1BP45 C1DX23
C1AD65 038441 C1CB83 920015 C1EG78 C1EG79 C1EG58 C1KA80 C1EG73 233624 242287 088678 429281 193144
C1BN19 394973
97
Pumps & Accessories

Unless noted otherwise, all pumps have: 2-Bolt SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 3" Inlet, 1-1/2" Outlet. Application Information: page 438 Specifications: page 448 Model Codes: page 449 Dimensions: page 452 Replacement Parts: page 98 Port Flange Kits: Flanges page 1085 Foot Brackets: page 130
Vickers Part Catalog No. See Vickers Model See Part No. Note Above Note Above C1EH33 C1HJ28 C1EH26 421967-3 416458-1 420618-3 45VQ60A-1C20 45VQ60A-86A20 45VQ60A-11C20 Ring Size 1200 Displ RPM 11.8 60 60 60 Flow GPM 1800 RPM 90 89 90
Fluid Conveying
Shaft 1-1/4 Straight Keyed
Outlet Position Inline with inlet (C) Opposite inlet (A) Inline with inlet (C)
Rot. CW CW CW
Max. PSI & Max. RPM 2500 PSI 2200 RPM 2500 PSI 2200 RPM 2500 PSI 2200 RPM
Wt. 75.00 60.00 75.00
Price Each
1-1/2 Straight Keyed 11.80 14 Tooth SAE C Splined 11.8
Vickers Part No. 421967-3 416458-1 420618-3
Vickers Model 45VQ60A-1C20 45VQ60A-86A20 45VQ60A-11C20
Ring Size 60 60 60
Cartridge Kit 416437 416437 416437
Shaft 233369 1-1/4"-Straight-Keyed 361760 1-1/2"-Straight-Keyed 242885 14Tooth-SAE-C-Splined
Shaft Key Shaft Seal 217596 239751 -394974 394974 394974
Seal Kit 920025 920025 920025

Catalog Part No. C1EH18 C1BP55 C1KA35 C1BP56 Part Number 416435 416436 421233 416437 Description Cartridge Kit, Ring Size 42, CW Rotation Cartridge Kit, Ring Size 50, CW Rotation Cartridge Kit, Ring Size 57 (CW Build) Cartridge Kit, Ring Size 60, CW Rotation Seal Kit, Buna-N Shaft Seal, Buna-N #1 Shaft, 1-1/4" Straight Keyed Wt. 22.04 21.88 21.79 21.82 0.16 0.06 31.35 Price Each
C1CB85 920025 C1BN20 394974 C1BE86 233369
98
Pumps & Accessories

Catalog Part No. C1EG80 C1BC42 C1EG70 C1FA30 Part Number 242885 217596 158630 194878 #11 Shaft, 14Tooth SAE C Splined Shaft Key, 5/16 x 1-1/8 Spirolox Ring Shaft Seal Washer Description Wt. 2.00 0.03 0.03 0.05 Price Each
Fluid Conveying
99
Pumps & Accessories

Single & Tandem Hydraulic Pumps Fixed Displacement Vane Pumps
Miscellaneous Single & Tandem Vane Pumps
Miscellaneous Single & Tandem Vane Pumps

Catalog Part No. Mfg. Part No. (Model No.) Mfg. Displ Name in/rev Mount Shaft Ports Rot. Other Features Wt. 45.00 Price Each SAE 4-Bolt VMQ Series Single Pump, 2-Bolt 1-1/2 Flange, Inlet Vickers 14.65 SAE C Straight 3, Outlet CW SAE-B Spline Thru-Drive Keyed Coupling 1-1/2 4.12 13 SAE 4-Bolt VQ Series Tandem Pump, 2-Bolt Tooth Flange, Inlet CCW 2-Bolt SAE-B Rear Pump SAE B SAE B 2-1/2, Outlet Mount, SAE-B Spline Splined 1 Thru-Drive Coupling SAE 4-Bolt VQ Series Tandem Pump, 14T Flange, Inlet 2-Bolt 2-Bolt SAE-B Rear Pump SAE-C CCW SAE C Splined 3, Outlet Mount, SAE-B Spline 1-1/4 Thru-Drive Coupling
C1KK69 710-0091-032
C1JC19 02-125443-7 (25VQTBS21A-2297CC-20L) Vickers
19.91
C1EL32 02-125553-7
Vickers
4.98
61.00
100
Pumps & Accessories

Single Hydraulic Pumps Fixed Displacement Gear Pumps
Haldex Barnes W900 Series Gear Pumps To 13 GPM @ 1800 RPM Up to 4000 PSI Up to 4000 RPM
Features: Through bore bushing type design constructed of high strength aluminum housings and cast iron end covers. Enhanced noise abatement with 13-tooth gears, superior trapping configuration and optimum gear profile. Efficiencies 90% overall, 98% volumetric, 92% mechanical. Application: Recommended for direct axial drive. For applications with radial and/or thrust loads, please contact us for application assistance. Pressure Limits: Outlet: (Varies with displacement. See table below). Inlet: 6 in. Hg vacuum to 29 PSI. Rated Speeds: Maximum speed varies with displacement (See table below). Minimum speed is 500 RPM at maximum continuous pressure. Maximum System Temperature: 200F continuous. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: ISO 4406 Cleanliness Level 18/14 or cleaner. Dimensions: page 453 Foot Brackets: page 130 Haldex Barnes W900 Series Gear Pumps To 13 GPM @ 1800 RPM Up to 4000 PSI Up to 4000 RPM
Displacement PressureRating (Continuous) Max Speed 0.488 in/rev 4000 PSI 4000 RPM Flow GPM Mtg 1800 RPM Flange 3.8 2-Bolt SAE A
Fluid Conveying
Catalog Part No. C1AK31
Barnes Model 1303193 (W9A108R3B01N)
Shaft 3/4 St.Keyed
Ports SAE-12 Side Inlet, SAE-10 Side Outlet
Other Rotation Features CW
Wt. 8.00
Price Each
Note: Minimum speed at Maximum Continuous Pressure is 500 RPM.
101
Pumps & Accessories

Hydreco 1500K Series Gear Pumps To 22 GPM @ 1800 RPM Up to 2500 PSI Up to 4000 RPM
Features: Heavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: Outlet: (Varies with displacement. See table below). Inlet: 5 in. Hg vacuum to 150 psi. Inlet pressures over 150 psi require a case drain line be installed. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 180F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 10 Micron Absolute for maximum pump life. Dimensions: page 454 Foot Brackets: page 130 Hydreco 1500K Series Gear Pumps To 22 GPM @ 1800 RPM Up to 2500 PSI Up to 4000 RPM
Flow Displacement GPM Catalog Mtg PressureRating 1800 Part No. Hydreco Model Max Speed RPM Flange C1AK82 1510KC3A1AB 1.180 in/rev 2500 PSI 4000 RPM 1.771 in/rev 2500 PSI 3200 RPM 8.3 2-Bolt SAE A 2-Bolt SAE A Other Rotation Features Bi-Rot. Shielded Outboard Bearing Shielded Outboard Bearing Price Each
Shaft 5/8 St.Keyed x 2.25 Long 5/8 St.Keyed x 2.25 Long
Ports 3/4 NPT Side & Rear (Side Ports Plugged) 3/4 NPT Side & Rear (Side Ports Plugged)
Wt. 22.59
C1AK92 1515KC3A1AB
12.4
Bi-Rot.
18.65
Note: Minimum speed under load is 600 RPM.
102
Pumps & Accessories

Hydreco 1500M Series Gear Pumps To 19 GPM @ 1800 RPM Up to 2000 PSI Up to 3200 RPM
Features: Heavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. All models have mechanical face seal which allows for high inlet pressures with no case drain. Pressure Limits: Outlet: 2000 PSI. Inlet: 5 in. Hg vacuum to 2000 psi. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 180F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 10 Micron Absolute for maximum pump life. Dimensions: page 456 Foot Brackets: page 130 Hydreco 1500M Series Gear Pumps To 19 GPM @ 1800 RPM Up to 2000 PSI Up to 3200 RPM
Flow Displacement GPM Catalog Mtg PressureRating 1800 Part No. Hydreco Model Max Speed RPM Flange C1AK78 1506MC3E1BB 0.738 in/rev 2000 PSI 3200 RPM 1.180 in/rev 2000 PSI 3000 RPM 1.467 in/rev 2000 PSI 2000 RPM 1.467 in/rev 2000 PSI 2000 RPM 5.8 2-Bolt SAE A 2-Bolt SAE A 2-Bolt SAE A 4-Bolt Foot Mount Other Rotation Features Bi-Rot. Shielded Outboard Bearing Shielded Outboard Bearing Shielded Outboard Bearing Shielded Outboard Bearing Price Each
Fluid Conveying
Shaft 5/8 St.Keyed x 2.00 Long 5/8 St.Keyed x 2.00 Long 5/8 St.Keyed x 2.00 Long 5/8 St.Keyed x 2.00 Long
Ports 3/4 NPT Rear Ports
Wt. 17.07
C1AK83 1510MC3E1BB
8.3
3/4 NPT Rear Ports
Bi-Rot.
16.79
C1AK88 1512MC3E1BB
10.4
3/4 NPT Rear Ports
Bi-Rot.
24.75
C1AK89
1512MC3G1BB
10.4
3/4 NPT Rear Ports
Bi-Rot.
24.75
Parts for Hydreco 1500M Series Pumps

Catalog Part No. Part Number Seal Kit for 1500M Series Pumps Description Wt. 0.17 Price Each
C1DK90 SKO362
103
Pumps & Accessories

Eaton Series 26 Gear Pumps To 24 GPM @ 1800 RPM Up to 3000 PSI Up to 3600 RPM
Features: 13-tooth gears minimize the flow ripple for reduced noise and vibration. Bearing lubrication system uses inlet oil instead of high pressure oil, improving volumetric efficiency. Innovative wear plate permits simple rotation change. Application: Rotation may be reversed by reconfiguring internal parts - no extra parts are required. Simply open the pump, switch the drive gear and idler gear, reposition the plug and reassemble. Side Load Limits - contact us for assistance. Pressure Limits: Outlet: Varies with displacement (See table below). Inlet: Maximum inlet vacuum at operating condition 6.0 In. Hg. Rated Speeds: Varies with displacement (See table below). Operating Temperatures: Minimum Operating -20F. Maximum Continuous 220F. Minimum Continuous Oil Viscosity 45 SSU. Dimensions: page 458 Foot Brackets: page 130 Eaton Series 26 Gear Pumps To 24 GPM @ 1800 RPM Up to 3000 PSI Up to 3600 RPM
Catalog Part No. C1JB79 Flow Displacement GPM Mtg PressureRating 1800 Max Speed RPM Flange 0.400 in/rev 3000 PSI 3600 RPM 0.500 in/rev 3000 PSI 3600 RPM 0.580 in/rev 3000 PSI 3600 RPM 0.580 in/rev 3000 PSI 3600 RPM 0.660 in/rev 3000 PSI 3600 RPM 0.660 in/rev 3000 PSI 3600 RPM 0.660 in/rev 3000 PSI 3600 RPM 0.660 in/rev 3000 PSI 3600 RPM 0.840 in/rev 3000 PSI 3600 RPM 0.840 in/rev 3000 PSI 3600 RPM 1.020 in/rev 3000 PSI 3600 RPM 1.020 in/rev 3000 PSI 3200 RPM 3.1 Other Rotation Features CW Price Each
Eaton Model 26001-RZG
Shaft
Ports SAE-12 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-12 Side Inlet, SAE-10 Side Outlet SAE-12 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-12 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet
Wt. 4.78
Fluid Conveying
2-Bolt SAE A 5/8 St. Keyed 2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt SAE A 5/8 St. Keyed 2-Bolt SAE A 9 Tooth SAE A Splined
C1JB81
26002-RZC
3.9
CW
4.86
C1JB83
26003-RZG
4.5
CW
5.00
C1JB84
26003-RZJ
4.5
CW
4.93
C1EX65
26004-RAF
5.1
2-Bolt 3/4 St.Keyed x SAE A 2 inches long 2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt SAE A 9 Tooth SAE A Splined
CW
5.15
C1FD31 26004-RZC
5.1
CW
5.64
C1JB85
26004-RZE
5.1
CW
5.08
C1JM15
26004-RZG
5.1
2-Bolt 5/8 St. Keyed SAE A 2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt SAE A 9 Tooth SAE A Splined
CW
6.43
C1FP92
26005-RZC
6.5
CW
5.45
C1HH87 26005-RZE
6.5
CW
6.55
C1JY29
26006-LZC
7.9
2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long
CCW
6.90
C1JB86
26006-RZC
7.9
CW
5.65
104
Pumps & Accessories


Eaton Series 26 Gear Pumps To 24 GPM @ 1800 RPM Up to 3000 PSI Up to 3600 RPM
Catalog Part No. C1JY31 Flow Displacement GPM Mtg PressureRating 1800 Max Speed RPM Flange 1.200 in/rev 3000 PSI 3200 RPM 1.200 in/rev 3000 PSI 3200 RPM 1.200 in/rev 2850 PSI 3200 RPM 1.54 in/rev 3000 PSI 3000 RPM 1.69 in/rev 3000 PSI 3000 RPM 1.77 in/rev 1950 PSI 3000 RPM 9.3 Other Rotation Features CCW Price Each
Eaton Model 26007-LZC
Shaft
Ports SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet SAE-12 Side Inlet, SAE-10 Side Outlet SAE-16 Side Inlet, SAE-10 Side Outlet
Wt. 7.10
2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt SAE A 9 Tooth SAE A Splined
C1JB88
26007-RZC
9.3
CW
4.84
C1JB89
26007-RZE
9.3
CW
5.80
C1JY32
26010-RZC
12.0
2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 2-Bolt SAE A 9 Tooth SAE A Splined
CW
7.50
C1JY34
26011-RZC
13.1
CW
7.90
C1JY36
26012-RZJ
13.7
CW
7.99
C1JD39
1.870 in/rev 3000 PSI 14.5 2-Bolt 3/4 St.Keyed x SAE A 1-1/4 long 3000 RPM Note: Minimum speed at rated pressure is 750 RPM. 26013-LZC
CCW
6.81
Fluid Conveying
Eaton L2 Series Gear Pumps To 26 GPM @ 1800 RPM Up to 3600 PSI Up to 3500 RPM
Pressure Limits: Outlet: Varies with displacement (See table below). Inlet: Maximum inlet vacuum at operating condition 6.0 In. Hg. Rated Speeds: Varies with displacement (See table below). Operating Temperatures: Minimum Operating -20F. Maximum Continuous 225F. Dimensions: page 459 Foot Brackets: page 130 Eaton L2 Series Gear Pumps To 26 GPM @ 1800 RPM Up to 3600 PSI Up to 3500 RPM
Catalog Part No. C1JX97 Flow Displacement GPM PressureRating 1800 Mtg RPM Flange Max Speed 1.55 in/rev 3600 PSI 3000 RPM 2.05 in/rev 3600 PSI 2750 RPM 12.0 2-Bolt SAE B Other Rotation Features CW Price Each
Eaton Model 25501-RSC
Shaft 7/8 Straight Keyed
Ports SAE-20 Side Inlet, SAE-12 Side Outlet SAE-20 Side Inlet, SAE-12 Side Outlet
Wt. 14.00
C1JX98
25503-RSA
15.9
2-Bolt 13 Tooth SAE SAE B B Splined
CW
14.00
105
Pumps & Accessories

Eaton L2 Series Gear Pumps To 26 GPM @ 1800 RPM Up to 3600 PSI Up to 3500 RPM
Catalog Part No. C1JY11 Flow Displacement GPM Mtg PressureRating 1800 Max Speed RPM Flange 2.33 in/rev 3600 PSI 2750 RPM 18.1 2-Bolt SAE B Other Rotation Features CCW Price Each
Eaton Model 25504-LSC
Shaft 7/8 Straight Keyed 7/8 Straight Keyed
Ports SAE-20 Side Inlet, SAE-12 Side Outlet SAE-20 Side Inlet, SAE-12 Side Outlet
Wt. 15.20
C1JY12
2.33 in/rev 3600 2-Bolt PSI 2750 18.1 SAE B RPM Note: Minimum speed at rated pressure is 750 RPM. 25504-RSC
CW
15.17
Parts for Eaton L2 Series Gear Pumps

Catalog Part No. C1JX96 Part Number 25500-901 Seal Kit for Plain Pump Description Wt. 0.20 Price Each
Permco Box Pumps For PTO Applications To 46 GPM @ 1800 RPM 2500 PSI 2000 RPM
Features: Sized to interchange with Muncie PTO pumps (See table below for Muncie numbers). Special iron alloy used for shaft covers, gear housings, bearing carriers and port end cover castings. Gears are cut to extremely close tolerances, and are shaped (rather than hobbing and shaving) for maximum volumetric efficiency. Application: Pumps are stocked with Permco's "Continental Shaft" (Shaft can be changed without pump disassembly by removing shaft retaining snap ring and pulling shaft and bearing out). This allows for an easy shaft change to satisfy various applications. All pumps have both side and rear ports (The 2 unused ports need to be plugged). All pumps are bi-rotational and may be used as bi-rotational motors (Case drain is drilled and plugged for use as a motor). Pressure Limits: Outlet: 2500 PSI. Inlet: Not to exceed 10 in. Hg vacuum at 1200 RPM, 7 in. Hg vacuum at 1800 RPM, or a positive pressure greater than 20 PSI. Rated Speeds: 2000 RPM. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 150F. Never to exceed 185F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B10 rating of at least 2.2. Dimensions: page 460 Foot Brackets: page 130 Permco Box Pumps For PTO Applications To 46 GPM @ 1800 RPM 2500 PSI 2000 RPM
Catalog Part No. Flow Displacement GPM Permco PressureRating 1800 Mtg RPM Flange Model Max Speed 2.000 in/rev 2500 PSI 2000 RPM 3.000 in/rev 2500 PSI 2000 RPM 13.5 Other Rotation Features Bi-Rot. Replaces Muncie PK8 Replaces Muncie PK13 Price Each
Shaft
Ports 1 NPT Side and Rear
Wt. 32.95
C1DG94 PEK10C
2/4-Bolt 13 Tooth SAE SAE B B Splined 2/4-Bolt 13 Tooth SAE SAE B B Splined
C1DG95 PEK15C
21.5
1 NPT Side and Rear
Bi-Rot.
12.00
106
Pumps & Accessories


Permco Box Pumps For PTO Applications To 46 GPM @ 1800 RPM 2500 PSI 2000 RPM
Catalog Part No. Flow Displacement GPM Permco PressureRating 1800 Mtg Model Max Speed RPM Flange 4.000 in/rev 2500 PSI 2000 RPM 4.500 in/rev 2500 PSI 2000 RPM 5.150 in/rev 2500 PSI 2000 RPM 5.790 in/rev 2500 PSI 2000 RPM 6.400 in/rev 2500 PSI 2000 RPM 29.0 Other Rotation Features Bi-Rot. Replaces Muncie PK17 Replaces Muncie PL19 Replaces Muncie PL23 Replaces Muncie PL25 Replaces Muncie PL27 Price Each
Shaft
Ports
Wt. 38.65
C1DG96 PEK20C
2/4-Bolt 13 Tooth SAE 1-1/4 NPT Side, 1 NPT Rear SAE B B Splined 4-Bolt 13 Tooth SAE SAE B B Splined 4-Bolt 13 Tooth SAE SAE B B Splined 4-Bolt 13 Tooth SAE SAE B B Splined 1-1/4 NPT Side and Rear
C1DG97 PEL17C
33.0
Bi-Rot.
47.00
C1DG98 PEL20C
37.0
1-1/4 NPT Side and Rear
Bi-Rot.
47.00
C1DG99 PEL22C
41.0
1-1/4 NPT Side and Rear
Bi-Rot.
49.52
C1DH11 PEL25C
46.0
4-Bolt 13 Tooth SAE 1-1/2 NPT Side, 1-1/4 NPT SAE B B Splined Rear
Bi-Rot.
47.00
Fluid Conveying
107
Pumps & Accessories

Miscellaneous Single Gear Pumps
Miscellaneous Single Gear Pumps

Catalog Part No. Mfg. Part No. Mfg. Displ Name in/rev Mount Shaft Ports Rot. Other Features Wt. Price Each
C1AK60 1413A-F136
Hydreco 1.36
5/8 Straight 1-11-1/2 NPT SAE-A- Keyed x Inlet, SAE-10 1-1/2" Outlet, 1/2-14 CCW 2-Bolt Long, NPT Tank Woodruff Port Key 5/8 Straight 1-11-1/2 NPT SAE-A- Keyed x Inlet, SAE-10 1-1/2" Outlet, 1/2-14 2-Bolt Long, NPT Tank Woodruff Port Key SAE-C 4-Bolt SAE-B 4-Bolt SAE-B 4-Bolt 14T SAE-C Splined 13T SAE-B Splined 1-1/4 NPT Side
Integral Relief Valve, Tach Drive
11.05
C1FF44
1413A-F137
Hydreco 1.36
CW
Integral Relief Valve, Tach Drive
11.52
C1JP97
P257A367SPLZA15Permco (P257A367SPLZA15-6) P5000C531ADXK251 (P5000C531ADXK25-1 Permco 4)
3.86
CW
With outboard bearing, cast iron design, sleeve bearings With outboard bearing, cast iron design, roller bearings
60.00
Fluid Conveying
C1JJ48
6.43
Bi-Rot
35.00
690506 C1GH65 (P5000C531ADZK25-1 Permco 4) C1GG92 P5151A224AAXQ22(P5151A224AAXQ22-5 Permco 4) P5151A231AAZA25Permco
6.43
13T With outboard bearing, cast SAE-B SAE-20 Side Bi-Rot iron design, roller bearings Splined 1-1/2 NPT Bi-Rot Side & Rear 1-1/2 NPT Inlet, 1-1/2 Bi-Rot NPT Outlet
52.68
5.70
13T SAE-B SAE-B 2/4-Bolt Splined SAE-B4-Bolt 13T SAE-B Splined
46.24
C1KM88
8.79
46.24
108
Pumps & Accessories

Single Hydraulic Pumps Variable Displacement Vickers PVE Series Piston Pumps To 21 GPM @ 1800 RPM
Vickers PVE Piston Pumps For Mobile Applications

Pressure Limits: Outlet: (Varies with displacement. See table below). Case: 5 PSI. Inlet: 5 in. Hg vacuum to 30 PSI. Rated Speed: Sizes 19 & 21: 2100 RPM @ 5 in. Hg, 2400 RPM @ 0 psig, 2800 RPM @ 5 psig. Size 12: 3000 RPM @ 0 psig. For overspeed limits contact us for details. Seals: Viton standard. Recommended Filtration: ISO level 18/16/14 (<2000 PSI), level 17/15/13 (2000-3000 PSI). Recommended Fluid Viscosity: 80-180 SSU (Running). System Temperature: 0F to 150F (Optimum Range). Note: Ratings based on using anti wear hydraulic fluid or automotive type crankcase oil designations SC, SD, SE or SF per SAE J183FEB80. For information on use with fire resistant fluids, contact us for assistance. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 468 Foot Brackets: page 130
Fluid Conveying
Vickers PVE Piston Pumps For Mobile Applications

Catalog Part No. Vickers Part No. Flow Displacement GPM & Pressure 1800 Rating RPM Mounting Flange Price Each
Vickers Model
Control
Shaft
Other Features
Wt.
C1JV32
02-341826
PVE19AR08AA10B 211100A100100C D0A
2.50 in/rev 3000 PSI
CW Rotation, Side SAE-24 Inlet SAE-16 Pressure 15T Outlet, Top SAE-10 Case Comp 2-Bolt SAE Drain, 3000 PSI 19.4 Load SAE B-B B-B Compensator Setting, 160 Sense Splined PSI Load Sense Bias Setting with Bleed-Down Orifice
52.00
Parts for Vickers PVE Pumps

Catalog Part No. C1KF37 C1KF36 C1KA74 Part Number 923948 923947 425416 Rotating Group, Model 19 Rotating Group, Model 21 Wafer Plate, CCW Rotation, Model 21 Description Wt. 6.25 6.23 0.35 Price Each
109
Pumps & Accessories

Single Hydraulic Pumps Variable Displacement Vickers PVQ Series Piston Pumps To 30 GPM @ 1800 RPM
Vickers PVQ Piston Pumps For Industrial Applications Low Noise / 1800 RPM Capability
PVQ piston pumps are quiet, in-line, variable displacement units with pressure compensator and/or flow compensator (load-sense) controls. These pumps operate at quietness levels that meet today's demanding industrial conditions. Pressure Limits: Outlet: (Varies with displacement. See table below). Case: 5 PSI. Inlet: 5 in. Hg vacuum to 30 PSI. Rated Speed: 1800 RPM. Seals: Viton standard. Recommended Filtration: ISO level 18/16/14 (<2000 PSI), level 17/15/13 (2000-3000 PSI). Recommended Fluid Viscosity: 80-180 SSU (Running), 2300 SSU Maximum at Startup. System Temperature: 0F to 150F (Optimum Range), 0F to 180F (Extreme Range). Note: Ratings based on using anti wear hydraulic fluid or automotive type crankcase oil designations SC, SD, SE or SF per SAE J183FEB80. For information on use with fire resistant fluids, contact us for assistance. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 471 Foot Brackets: page 130
Vickers PVQ Piston Pumps For Industrial Applications Low Noise / 1800 RPM Capability
Catalog Part No. C1JR31 Vickers Part No. 02-341576 Flow Displacement GPM Control & Pressure 1800 See Mounting RPM Below Flange Rating 0.64 in/rev 3000 PSI 1.29 in/rev 3000 PSI 2.01 in/rev 2000 PSI 4.98 C21 2-Bolt SAE A 2-Bolt SAE B 2-Bolt SAE B Price Each
Vickers Model PVQ10-A2R-SE1S20-C21-12 PVQ20-B2R-SE1S21-C21-12 PVQ32-B2R-SE1S21-C14-12
Shaft
Other Features
Wt. 25.30
3/4 CW Rotation, SAE-12 Straight Rear Main Ports, SAE-6 Keyed Case Drain 7/8 CW Rotation, SAE-12 Straight Rear Main Ports, SAE-8 Keyed Case Drain 7/8 CW Rotation, SAE-12 Straight Rear Main Ports, SAE-8 Keyed Case Drain
C1JR28
02-341552
10.0
C21
31.00
C1JV15
02-341685
15.66
C14
34.00
CM7 Control: Pressure Compensated (350-1500 PSI range, set 1000 PSI) C21V11B Control: Pressure Compensated (350-3000 PSI range, set 3000 PSI) and Load Sensing (150-250 PSI differential range, set at 160 PSI), with Bleed-Down orifice C21 Control: Pressure Compensated (350-3000 PSI range, set 3000 PSI) C19 Control: Pressure Compensated (350-3000 PSI range, set 2850 PSI) C14 Control: Pressure Compensated (350-2000 PSI range, set 2000 PSI)
110
Pumps & Accessories

Single Hydraulic Pumps Variable Displacement Vickers PVQ Series Piston Pumps To 30 GPM @ 1800 RPM
Parts for Vickers PVQ Piston Pumps
Catalog Part No. C1CB76 C1DX95 C1BM27 Part Number 919191 626933 343573 Description Standard Buna-N Seal Kit for PVQ10/13 Models Standard Buna-N Shaft Seal for PVQ40/45 Standard Buna-N Shaft Seal for PVQ20/32 Models Wt. 0.08 0.06 0.05 Price Each
Fluid Conveying
111
Pumps & Accessories

Single Hydraulic Pumps Variable Displacement Eaton Medium Duty Piston Pumps To 32 GPM @ 1800 RPM
Eaton Medium Duty Piston Pumps For Mobile Applications High Pressure / High Speed Capability
Features: Compact, lightweight aluminum housing. Continuous Rated Pressure: 3000 PSI. Maximum Intermittent Pressure: 4000 PSI for 1.16 in and 2.32 in models, 3800 PSI for 2.77 in models, 4500 PSI for 4.21 in models. Continuous Allowable Case Pressure: 25 PSI. Maximum Continuous Inlet Vacuum: 4 in. Hg. for 1.16 in models, 3 in. Hg. for 2.32 in models, 2 in. Hg. for 2.77 and 4.21 in models, Temperature Limits: -20F to 225F. Recommended Filtration: ISO 4406 Cleanliness Level 18/13 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 463 Foot Brackets: page 130
Eaton Medium Duty Piston Pumps For Mobile Applications High Pressure / High Speed Capability
Flow Displacement GPM Catalog Eaton Part & Speed 1800 Rating Part No. No. RPM C1JM62 70122-RCA 1.16 in/rev 2500 RPM 1.16 in/rev 2500 RPM 1.16 in/rev 2500 RPM 9.0 Mounting Flange 2-Bolt SAE A 2-Bolt SAE A 2-Bolt SAE A Price Each
Control Pressure Compensated Pressure Compensated Pressure Compensated
Shaft
Other Features
Wt.
3/4 CW Rotation, Rear Ports (SAE-14 Inlet, Straight SAE-12 Outlet), SAE-6 Case Drain, 3000 18.00 Keyed PSI Compensator Setting (Adjustable) 9T SAE CW Rotation, Rear Ports (SAE-14 Inlet, A SAE-12 Outlet), SAE-6 Case Drain, 3000 18.00 Splined PSI Compensator Setting (Adjustable) 9T SAE CW Rotation, Rear Ports (SAE-12 Inlet, A SAE-10 Outlet), SAE-6 Case Drain, 2800 18.00 Splined PSI Compensator Setting (Adjustable) CW Rotation, Rear Ports (SAE-20 Inlet, 13T SAE-16 Outlet), SAE-6 Case Drain, 3000 SAE B PSI Compensator Setting (Adjustable), 26.00 Splined 200 PSI Load Sense Bias (Non-adjustable) CCW Rotation, Side Ports (2 Inch Code 14T 61 Flange Inlet, 1 Inch Code 61 Flange SAE C Outlet), SAE-10 Case Drain, 3000 PSI 78.00 Splined Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable) CW Rotation, Side Ports (2 Inch Code 61 Flange Inlet, 1 Inch Code 61 Flange 14T SAE C Outlet), SAE-10 Case Drain, 3000 PSI 78.00 Splined Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable)
C1KK68
70122-RCW
9.0
C1KC97
70122-RBB
9.0
C1BY63 70423-RBT
2.77 in/rev 3000 RPM
Pressure 21.5 Compensated 2-Bolt Load Sense SAE BB
C1BY64
70523-LAB
Pressure 2-4-Bolt 32.8 Compensated SAE C Load Sense
C1KD62
70553-RAB
Pressure 32.8 Compensated 2-4-Bolt SAE C Load Sense
112
Pumps & Accessories

Single Hydraulic Pumps Variable Displacement Eaton Medium Duty Piston Pumps To 32 GPM @ 1800 RPM
Parts for Eaton Medium Duty Piston Pumps
Catalog Part No. C1FA80 C1KC99 C1KD57 C1JS78 C1JX45 C1JX46 C1JX44 Part Number 70422-915 70142-938 70523-900 0070122-902 16253-16 16253-18 16232-22 Seal Kit for Models 70422 and 70423 Seal Repair Kit, Models 70142-70144-70145 Seal Repair Kit, Model 70523 Seal Repair Kit, Model 70122 Shaft Seal, Model 70122 Shaft Seal, Model 70422 Shaft Seal, Model 70523 Description Wt. 0.16 0.05 0.18 0.08 0.02 0.04 0.14 Price Each
Fluid Conveying
113
Pumps & Accessories

Single Hydraulic Pumps Variable Displacement Eaton 420 Series Mobile Piston Pumps To 38 GPM @ 1800 RPM
Eaton 420 Mobile Piston Pumps High Pressure / High Speed Capability
Eatons 420 Series mobile pumps are open circuit, axial piston designs with displacements of 2.50 in/rev, 3.00 in/rev, 3.80 in/rev and 4.88 in/rev for operating speeds up to 2,650 rpm. They are available with a variety of control options to match their performance to a broad range of mobile applications. Features: Highly efficient pump controls Strong, field-proven rotating group Saddle-type swashplate with steel-backed polymer bearings and a pressure lubrication passage to reduce wear Stiff swashplate reduces deflection, allows for evenly loaded bearings & extends unit life Single control piston reduces forces acting on swashplate & reduces package size Bimetal timing plate improves pump filling characteristics which reduces fluid-borne noise and extends pump life. Pressure Ratings: 2.50 in/rev thru 3.80 in/rev Models: 4060 psi Continuous, 4600 psi Intermittent, 5000 psi Peak. 4.88 in/rev Models: 3050 psi Continuous, 3335 psi Intermittent, 3625 psi Peak. Speed Ratings: 2.50 in/rev & 3.00 in/rev Models: 2650 rpm @ 0 psig, 2450 rpm @ 5 in.Hg, 2950 rpm @ 15 psig, 3600 rpm Max Standby. 3.80 in/rev Models: 2600 rpm @ 0 psig, 2400 rpm @ 5 in.Hg, 2800 rpm @ 15 psig, 3600 rpm Max Standby. 4.88 in/rev Models: 2200 rpm @ 0 psig, 1800 rpm @ 5 in.Hg, (N/A) rpm @ 15 psig, 3600 rpm Max Standby. Note: All models have a 600 RPM Minimum Speed. Inlet Pressure: 0 PSIG Rated, 5 in.Hg Minimum, 50 PSIG Maximum. Case Pressure: 5 psig Maximum Continuous, 30 psig Maximum Intermittent, 75 psig Peak. Operating Temperature: 200F Rated, -35F Minimum, 220F Maximum. Recommended Hydraulic Fluid: Use antiwear hydraulic oil, or automotive type crankcase oil (designations SC, SD, SE or SF) per SAE J183 FEB80. Hydraulic Fluid Viscosity: 80 to 188 SSU Recommended Operating Range, 1192 SSU Maximum Continuous, 9720 SSU Maximum at Startup. Recommended Filtration: ISO 4406 Cleanliness Level 21/18/13 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 464
114
Pumps & Accessories

Single Hydraulic Pumps Variable Displacement Eaton 420 Series Mobile Piston Pumps To 38 GPM @ 1800 RPM
Eaton 420 Mobile Piston Pumps High Pressure / High Speed Capability
Flow Displacement GPM Catalog & Pressure 1800 Part No. Eaton Part No. Rating RPM Mounting Flange Price Wt. Each
Control
Shaft
Other Features
C1HZ85
421AK00694A
Pressure 19.4 Compensated Load Sense
2-Bolt SAE B
CW Rotation, Code 61 Flange Rear Ports 2" Inlet 1" Outlet, Top SAE-12 13T Case Drain, SAE-4 Load Sense, 3000 SAE B PSI Compensator Setting (Adjustable), Splined 200 PSI Load Sense Bias (Adjustable), External Manual Stroke Adjustment, Standard Polyacrylate Shaft Seal
35.00
C1KG78
421AK00694B
2-Bolt SAE B
CW Rotation, Code 61 Flange Side Ports 2" Inlet 1" Outlet, Top SAE-12 Case 13T Drain, SAE-4 Load Sense, 3050 PSI SAE B Compensator Setting (Adjustable), 200 57.00 Splined PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal, External Manual Stroke Adjustment CW Rotation, Code 61 Flange Side Ports 2" Inlet 1" Outlet, Top SAE-12 Case Drain, SAE-4 Load Sense, 2850 PSI 15T Compensator Setting (Adjustable), 455 35.00 Splined PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal, External Manual Stroke Adjustment CW Rotation, Code 61 Flange Side Ports 2" Inlet 1" Outlet, Top SAE-12 Case 15T Drain, SAE-4 Load Sense, 3550 PSI Splined Compensator Setting (Adjustable), 145 58.00 PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal CW Rotation, Code 61 Flange Side Ports 2" Inlet 1" Outlet, Top SAE-12 Case 14T Drain, SAE-4 Load Sense, 3550 PSI 55.00 SAE C Setting (Adjustable), 145 Splined Compensator PSI Load Sense Bias (Adjustable), Single Viton Shaft Seal CW Rotation, Code 61 Flange Side Ports 2" Inlet 1" Outlet, Top SAE-12 Case 14T Drain, SAE-4 Load Sense, 3550 PSI SAE C Compensator Setting (Adjustable), 290 62.00 Splined PSI Load Sense Bias (Adjustable), Aux Rear Mount SAE B 2 Bolt 15T Spline, Single Viton Shaft Seal CW Rotation, Code 61 Flange Side Ports 2" Inlet 1" Outlet, Top SAE-12 Case 14T Drain, SAE-4 Load Sense, 3000 PSI SAE C 57.00 Splined Compensator Setting (Adjustable), 145 PSI Load Sense Bias (Adjustable), Single Viton Shaft Seal
C1KK35
421AK01292B
Pressure 29.6 Compensated 2-Bolt Load Sense SAE BB
C1KA62
421AK00391B
Fluid Conveying
Pressure 2-Bolt 29.6 Compensated SAE BB Load Sense
C1KA64
421AK00393B
2/4-Bolt SAE C
C1KA63
421AK00392B
2/4-Bolt SAE C
C1KA65
421AK00394B
38
Pressure Compensated Load Sense
2/4-Bolt SAE C
115
Pumps & Accessories

Double Hydraulic Pumps Fixed Displacement Vickers V2010 Series Vane Pumps To 19.5/10.5 GPM @ 1800 RPM
Vickers V2010 Double Vane Pumps For Industrial & Mobile Applications
Double pumps provide a single power source capable of serving two separate hydraulic circuits, resulting in a more compact, simple installation. Features: Vickers balanced vane construction. Buna-N seals standard. Shaft rotation can be changed by changing the assembly of internal parts. Ports: Inlet: 1-1/2 inch Code 61 Flange. Front Pump (Shaft End) Outlet: SAE-16 Straight Thread. Rear Pump (Cover End) Outlet: SAE-8 Straight Thread. Application Information: page 438 Dimensions: page 443 Foot Brackets: page 130
Pumps are stocked as shown in table. ANY outlet position and rotation is available for same-day shipment.
Vickers V2010 Double Vane Pumps For Industrial & Mobile Applications
Ring Size 1200 RPM Front Rear 6/2 Flow GPM 1800 RPM Front Rear 9.0/3.0 Port Max Loc PSI Front Front Max Rear Rear RPM A/A
Fluid Conveying
Catalog Part No. C1ZV47
Vickers Part No. 02-465603-5
Vickers Model V2010-1F6S2S-11AA -12L
Shaft 13 Tooth SAE B Splined
Displ Mtg Front Flange Rear 2-Bolt SAE B 1.19 0.40
Rot.
Wt. 30.00
Price Each
2500 3000 CCW 2500
Note: Flow: GPM @ 1800 RPM and 100 PSI. Displacement: Cubic inches per revolution. Max PSI & RPM based on using petroleum oil at 120F and at 0 PSI inlet pressure. Min speed: 600 RPM.
Vickers V2010 Double Vane Pumps Replacement Parts List

Catalog Part No. C1CC33 C1CC32 C1CC35 Part Number 923471 923470 923496 Cartridge Kit, Cover End, Ring Size 01 Cartridge Kit, Cover End, Ring Size 02 Cartridge Kit, Cover End, Ring Size 03 Cartridge Kit, Cover End, Ring Size 04 Cartridge Kit, Cover End, Ring Size 05 Cartridge Kit, Cover End, Ring Size 06 Cartridge Kit, Cover End, Ring Size 07 Screw for bolting on Cover End, Ring Sizes 06 & 07, (4) required Seal Kit, Buna-N Shaft Seal, Buna-N Shaft Key, 3/16 x 1-1/4 Description Wt. 1.31 1.33 1.30 1.82 1.79 2.23 2.20 0.12 0.09 0.04 0.01 Price Each
C1CC31 923469 C1CC30 923468 C1CC36 C1AA63 923497 001278 C1CC37 923498 C1CC39 923577 C1BD93 229236 C1DU27 009955
116
Pumps & Accessories

Double Hydraulic Pumps Fixed Displacement Miscellaneous
Miscellaneous Double Vane Pumps
Miscellaneous Double Vane Pumps

Catalog Part No. C1HE65 Displ in/rev Mfg. Front Name Rear Mount Other Features Price Each
Mfg. Part No. (Model No.) 02-137210-2 (2520V21A14-1BB22R)
Shaft
Ports SAE 4-Bolt Flange, Inlet 2-1/2, Outlets 1 Front 3/4 Rear
Rot.
Wt. 46.97
4.10 7/8 2-Bolt Vickers Front 2.80 SAE B Straight Keyed Rear Vickers
V Series CW Double Pump
C1KK70
711-0251-032
2.75 15T SAE 4-Bolt Flange, Front 2-Bolt Inlet 3, Outlets 1 Front 1.96 SAE B SAE-BB Splined 1 Rear Rear SAE 4-Bolt Flange, Inlet 3, Outlets 1-1/4 Front 1 Rear SAE 4-Bolt Flange, Inlet 3, Outlets 1-1/4 Front 1 Rear SAE 4-Bolt Flange, Inlet 4, Outlets 1-1/2 Front 1-1/4 Rear SAE 4-Bolt Flange, Inlet 4, Outlets 1-1/2 Front 1-1/4 Rear SAE 4-Bolt Flange, Inlet 4, Outlets 1-1/2 Front 1-1/4 Rear SAE 4-Bolt Flange, Inlet 3-1/2, Outlets 1-1/2 Front 1 Rear SAE 4-Bolt Flange, Inlet 4, Outlets 1-1/2 Front 1-1/4 Rear SAE 4-Bolt Flange, Inlet 2-1/2, Outlets 1 Front 3/4 Rear SAE 4-Bolt Flange, Inlet 3-1/2, Outlets 1-1/2 Front 3/4 Rear SAE 4-Bolt Flange, Inlet 3-1/2, Outlets 1-1/2 Front 3/4 Rear
VMQ Series CW Double Pump
30.50
C1KK72
712-0157-032
Fluid Conveying
6.83 1-1/4 Vickers Front 2-Bolt Straight 4.33 SAE C Keyed Rear Vickers 6.83 Front 2-Bolt 1-1/4 4.33 SAE C Straight Keyed Rear
CCW VMQ Series Double Pump
C1KK71
712-0156-032
126.00
C1KK74
714-0066-032
8.54 1-1/2 Vickers Front 2-Bolt Straight 6.83 SAE C Keyed Rear
CCW VMQ Series Double Pump
90.00
C1JM66
13.12 714-0081-032 Front 2-Bolt 1-1/2 (VMQ24535S215125B00100A Vickers 7.63 SAE C Straight Keyed AADCANL00A032) Rear 13.12 714-0080-032 1-1/2 (VMQ24535S215125B00100A Vickers Front 2-Bolt Straight 7.63 SAE C AABBANR00A032) Keyed Rear 713-0068-032 Vickers 14.65 Front 2-Bolt 1-1/2 4.88 SAE C Straight Keyed Rear
VMQ Series CCW Double Pump
90.00
C1JM65
CW
VMQ Series Double Pump
90.00
C1KK73
90.00
C1JD62
8.54 714-0067-032 1-1/2 (VMQ24535S140112B00100A Vickers Front 2-Bolt Straight 6.83 SAE C AABBANR00A032) Keyed Rear 430199-4 (2520VQ12A11-11DD20) Vickers 2.45 13 Front 2-Bolt Tooth 2.22 SAE B SAE B Rear Splined
CW
VMQ Series Double Pump
90.00
C1BP94
VQ Series CW Double Pump
45.00
C1HH36
02-142081-F (4520VQH-60A8-86AD-20L)
11.80 1-1/2 Vickers Front 2-Bolt Straight 1.67 SAE C Keyed Rear Vickers 11.80 Front 2-Bolt 1-1/2 1.67 SAE C Straight Keyed Rear
CCW VQH Series Double Pump
30.00
C1HH35
02-142081-1 (4520VQH60A8-86AA20)
VQH Series CW Double Pump
117
Pumps & Accessories

Double Hydraulic Pumps Fixed Displacement Miscellaneous
Parts for Miscellaneous Double Fixed Vane Pumps
Catalog Part No. C1KF32 C1BP54 Part Number 923174 416427 V2020 Series, Seal Kit VQ Series, Bearing for 2520VQ VQ Series, Cartridge Kit Cover End for **20VQ**11, Ring Size 11 VQ Series, Seal Kit for 2520VQ, Std Single Seal, Buna-N VQ Series, Seal Kit for 3525VQ, Std Single Seal, Buna-N VQ Series, Seal Kit for 4535VQ, Optional Double Seal, Buna-N VQ Series, #11 13T SAE-B Splined Shaft for 2520VQ VQ Series, #11 14T SAE-C Splined Shaft 4535VQ VQ Series, Shaft Seal Kit, Single Shaft Seal, 3520VQ V Series, Bearing for 45**V V Series, Body Kit, 4520V V Series, Cartridge Kit Shaft End for 3520V-38*-22, Ring Size 38 V Series, Seal Kit for 2520V17, Buna-N V Series, Snap Ring for 3525V Description Wt. 0.11 0.31 5.02 0.15 0.17 0.21 1.41 3.81 0.17 1.02 19.74 14.00 0.11 0.02 Price Each
C1AA76 001705 C1CB87 920040 C1DZ94 920056 C1EU37 C1BH19 C1EF60 C1KF95 C1KF58 C1EG14 C1CB93 C1EG73 920072 254848 289084 920048 942356 02-102555 922856 193144
C1AK38 131812
Miscellaneous Double Gear Pumps

Miscellaneous Double Gear Pumps
Catalog Part No. C1ZT99 Displ in/rev Mfg. Front Name Rear Mount Other Features Longer Slip-Fit Key Price Each
Fluid Conveying
Mfg. Model
Shaft
Ports SAE-20 Inlet SAE-10 Outlets
Rot. CW
Wt. 9.78
26504-RBN (ACMAR049904AC010016000 Eaton 0A00000B0B)
0.66 3/4" Front 2-Bolt 0.66 SAE A Straight Keyed Rear
118
Pumps & Accessories

Dump Pumps Pump/Valve Assemblies For Dump Trucks & Trailers
Introduction to Dump Pumps
In applying the Permco Dump Pump, an understanding of the 2-Line and 3-Line circuits is essential for proper operation and maximum unit life. 2-Line Operation: In the 2-Line Operation, one line is connected from the oil tank to the inlet of the pump, and one line is connected from the cylinder port of the valve to the cylinder. With the pump engaged and the valve spool in the neutral position, oil will recirculate inside the unit. It has been determined through testing that the raise in temperature per every minute of operation in this mode is 7-1/2F. If operation is allowed to continue beyond the recommended 5 minute time interval, a reduction in clearances of the rotating group due to excessive heat and subsequent expansion will occur. The result may lead to the unit locking up and premature failure of the drive shaft or other internal components. 3-Line Operation: In the 3-Line Operation, one line is connected from the oil tank to the inlet of the pump, one line is connected from the cylinder port of the valve to the cylinder and one line is connected from the pump's return port back to the oil tank. A metal sleeve is inserted into the inlet port of the valve which diverts flow back to tank from either the cylinder retracting or from the valve spool being in neutral. Heating of the oil is reduced with a 3-Line circuit, but is not eliminated. 10 minutes is the maximum recommended time to allow the pump to be engaged and the valve spool in neutral with a 3-Line circuit. CAUTION: Operation with the 3-Line Sleeve installed in a 2-Line application is potentially hazardous. Shaft Seal Life: Like any control valve, there are inherent pressure drops within the dump pump due to internal core configurations. During cylinder retraction, fluid velocities may increase to a point that excessive back pressures may be seen at the pump shaft seal area. For this reason, Permco installs high pressure motor shaft seals in all dump pump units to prevent premature shaft seal failure. It is also suggested that movement of the valve spool from the neutral to the raise position in rapid succession be avoided as this may also contribute to the premature failure of the shaft seal.
Fluid Conveying
119
Pumps & Accessories

Permco DM400 Series Dump Pumps For Light & Medium Duty Dump Trucks
Features: Rugged cast iron, roller bearing pump construction. High strength alloy steel gear and shaft set. Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges. 100% factory tested. 1-1/4 NPT inlet port, 3/4 NPT pressure port, 3/4 NPT return port (for 3rd line). Built in direct acting relief valve set at factory provides protection to both the pump and to the cylinder. Manual Shift standard. Built-in load check. Neutral Lockout device preventing accidental lowering of the dump body. Application: See Introduction To Dump Pumps at the beginning of this section for details on 2-Line and 3-Line Operation. Pressure Limit: 2500 PSI. Rated Speed: 2400 RPM. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 150F. Never to exceed 185F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B10 rating of at least 2.2. Dimensions: page 461 Permco DM400 Series Dump Pumps For Light & Medium Duty Dump Trucks
Catalog Part No. Flow Displacement GPM PressureRating 1800 Mount Max Speed RPM Direct 4.000 in/rev 2500 PSI 2400 RPM 4.000 in/rev 2500 PSI 2400 RPM 21.5 Remote Mount Direct Relief Circuit Valve Mount Setting Type Location Rotation (PSI) 3-Line -CCW 2000 Other Features Replaces Commercial G102-2-20L Replaces Commercial G101-2-20 Price Each
Permco Model
Wt. 40.08
C1CN69 DMD-400-20-ZL-200
C1CN70 DMR40020ZL200
Remote
21.5
3-Line
Left Side
--
2000
30.00
Note: To convert a 3-Line model for use in a 2-Line circuit, remove the metal sleeve in the inlet port of the valve, and install a 3/4 NPT plug in the return port.
120
Pumps & Accessories

Permco DMD/DM640 Series Dump Pumps For Medium & Heavy Duty Dump Trucks
Features: Rugged cast iron, roller bearing pump construction. High strength alloy steel gear and shaft set. Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges. 100% factory tested. 1-1/4 NPT inlet port, 3/4 NPT pressure port, 3/4 NPT return port (for 3rd line). Built in direct acting relief valve set at factory provides protection to both the pump and to the cylinder. Manual Shift standard. Built-in load check. Neutral Lockout safety cap for use with pull-out cable. 2 extra long studs for easy installation of pump support bracket on Direct Mount models. Application: See Introduction To Dump Pumps at the beginning of this section for details on 2-Line and 3-Line Operation. Pressure Limit: 2500 PSI. Rated Speed: 2400 RPM. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 150F. Never to exceed 185F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B10 rating of at least 2.2. Dimensions: page 462 Permco DMD/DM640 Series Dump Pumps For Medium & Heavy Duty Dump Trucks
Catalog Part No. Mtg. Style Direct Flow Displacement GPM PressureRating 1800 Max Speed RPM 6.400 in/rev 2500 PSI 2400 RPM 6.400 in/rev 2500 PSI 2400 RPM 46.0 Remote Mount Direct Relief Circuit Valve Mount Setting Type Location Rotation (PSI) 3-Line -Right Side CCW 2000 Other Features Replaces Commercial C102D251 Replaces Commercial C101D25 Price Each
Fluid Conveying
Permco Model
Wt. 63.00
C1CN68 DMD-25-Z-L-MS-20
C1CN66 DM-640-25-ZR-M-T-200
Remote
46.0
3-Line
--
2000
Note: To convert a 3-Line model for use in a 2-Line circuit, remove the metal sleeve in the inlet port of the valve, and install a 3/4 NPT plug in the return port.
121
Pumps & Accessories

Refuse Pump System Permco Versa-Pak Refuse Pump System
Permco Versa-Pak Refuse Pump System
The Versa-Pak Refuse Pump System is available in two configurations. Dry Valve System: The Versa-Pak Valve in a Dry Valve System functions as a pressure compensated flow control. This limits flow to the hydraulic system allowing a preset amount to the system with the excess flow being returned to the tank at low pressure. This reduces repairs and downtime associated with overspeeding and overpressurizing the hydraulic system. The Dry Valve eliminates heat build-up in the hydraulic system associated with large flows when the system is not in use (Operator controls with switch or air valve). Unloader System: The Versa-Pak Valve in an Unloader System functions as a pressure compensated flow control and an unloader. The unloader diverts 100% of the flow back to tank at extremely low pressure when the hydraulic system is not required (Operator controls with switch). Versa-Pak Pump Features: 25% longer idler gear bearings to reduce shaft deflection and extend life. Sealed outboard bearing with protective shield to keep out contamination. Dowel pin construction. Solid one-piece gear and shaft set. Bleed valve built into rear cover (Dry Valve models). Versa-Pak Valve Features: Tamper-resistant flow regulation. Dry Valves: Easily operated by a dash mounted electric over air switch or manual air valve. Includes breather vent, tubing and fittings. Note: Please contact us for application assistance with the Versa-Pak System.
Catalog Part No.
Permco Model
Description Versa-Pak Pump, Flow Control Valve set at 55 GPM. 42 GPM @ 1200 RPM, 9.099 cu.in. per rev displacement, 4-Bolt SAE-C Mounting Flange, 1-1/4" Keyed Shaft, CCW Rot Versa-Pak Pump, Dry Valve Function. 42 GPM @ 1200 RPM, 9.099 cu.in. per rev displacement, 4-Bolt SAE-C Mounting Flange, 1-1/4" Keyed Shaft, CCW Rot Solenoid, Unloader Function.
Wt. 50.00 50.00 0.55
Price Each
C1KN74 VP42-4COFLFC55 C1DR58 VP42-4COFLDV C1CC88 999-00948
122
Pumps & Accessories

Power Steering Pumps Vickers VTM-42 Series Vane Pumps To 7.5 GPM @ 1500 RPM
Vickers VTM-42 Power Steering Pumps Integral Flow Control and Relief Valves
Features: Integral flow control and relief valves eliminate the need for separate valves. Balanced vane design eliminates pressure-induced bearing loads to provide longer life. Vanes automatically compensate for any vane tip wear, providing like-new pump performance for the duration of the pump's life. Maximum Pressure: 2000 PSI. Maximum Speed @ 100 PSI: 7000 RPM (0.21in/rev-0.79in/rev), 6000 RPM (0.96in/rev), 5000 RPM (1.18in/rev). Maximum Speed @ 1500 PSI: 5000 RPM (0.21in/rev), 4500 RPM (0.31in/rev), 4200 RPM (0.38in/rev), 2800 RPM (0.79in/rev), 2600 RPM (0.96in/rev), 2500 RPM (1.18in/rev). Maximum Speed @ 2000 PSI: 4250 RPM (0.21in/rev), 4000 RPM (0.31in/rev), 3800 RPM (0.38in/rev), 2800 RPM (0.79in/rev), 2300 RPM (0.96in/rev), 2000 RPM (1.18in/rev).
Fluid Conveying
Vickers VTM-42 Power Steering Pumps Integral Flow Control and Relief Valves
Flow Rate & Relief Setting (At 1500 RPM & 100 PSI) 7.5 GPM 1500 PSI
Catalog Part No.
Vickers Part No.
Vickers Model VTM42-60-75-15-NO-R1-14
Mounting Flange 2-Bolt 4.1875 B.C.
Shaft
Ring Size 1200 Displ RPM 6
Other Features No reservoir, No manifold, CW Rotation
Wt. 11.62
Price Each
C1BM78 385998-R
1/2-20 UNF-2A Thd with 1.18 Woodruff Key
123
Pumps & Accessories

Hand Pumps
Doering Series 241 Cartridge Hand Pumps

Cavity Required: C-10-2. Installation: Lubricate seals, using 1-1/4 wrench torque to approximately 50 foot pounds. Socket may be rotated 360 for handle positioning.
Doering Series 241 Cartridge Hand Pumps

Catalog Part No. C1EN21 Doering Model 241016 16 inch Handle for 241 Series Pumps. Description Wt. 2.50 Price Each
124
Pumps & Accessories

Hand Pumps
Integrated Hydraulics 1HP Series Cartridge Hand Pump

Features: Built in pressure and suction checks. Self contained cartridge element. Low leakage ball and seat design. Minimal effort required for plunger movement. Requires a machined C-10-2 cavity or housing for installation. Application: The 1HP7 hand pump has been designed to be used on machines which require emergency release of brakes or for pilot supply for emergency lowering of access platforms. It can also be utilised in the lubrication circuits. Operation: Depressing the plunger will force oil out through a check valve and into the system. The plunger will then retract drawing oil into the chamber through a second check valve. Specifications: 0.08 cubic inch displacement. 725 psi maximum generated pressure. -22 to +194F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 30 ft-lbs torque cartridge into cavity. For compatible C-10-2 bodies see page 329
Fluid Conveying
Integrated Hydraulics 1HP Series Cartridge Hand Pump Miscellaneous Products

Catalog Part No. C1KA11 Integrated Hydraulics Part No. 410AA00034A Integrated Hydraulics Model 1HP7-S Body None Seal Material Nitrile Wt. 0.35 Price Each
125
Pumps & Accessories

Air-Operated Diaphragm Pumps

Aro Air-Operated Diaphragm pumps offer several performance advantages over other pump types in fluid transfer applications. (1) When you close the fluid outlet, the pump stops. No movement, no wear, no overload, no heat buildup, no power consumption. (2) Variable flow rates are achieved by simply adjusting air pressure to the pump or by restricting the discharge line. (3) Positive priming provides easy start-ups. Internal fluid check valves are located close to the diaphragm chambers, assuring positive self-priming, even from a dry start. (4) Pumping efficiency remains constant since there are no rotors, gears, vanes or pistons to wear out. (5) Runs dry without damage. (6) No foaming or shearing of material. Process fluids enter and exit unchanged. (7) No lubrication is required so there is less maintenance. (8) Pumps are lightweight and portable and can be carried from job to job with ease. Features: Patented "Unbalanced" air valve design ensures pump will always resume pumping action when called on. Bolted construction for an improved seal and safer fluid handling. No rotating or sliding seals to leak or fail. Dimensions & Performance Curves: page 473
1/4 Inch Ports 4.6 GPM Capability Non-Metallic Wetted Parts

Maximum Flow Rate: 4.6 GPM. Displacement: 0.014 Gallons per Cycle. Maximum Operating Pressure: 100 PSI. Suspended Solids Capability: Clean fluids only. Maximum Dry Suction Lift: 20 ft. Fluid Ports: 3/8 NPT Inlet. 1/4 NPT Outlet. Air Inlet: 1/4 NPT. Recommended Filter/Regulator : page 656 1/4 Inch Ports 4.6 GPM Capability Non-Metallic Wetted Parts
Catalog Part No. C1DG80 C1DG81 Aro Model PD02P-APS-PTA PD02P-APS-PTT Center Section Polypropylene Polypropylene Port Single In/Out Single In/Out Wetted End Polypropylene Polypropylene Seat Material Polypropylene Polypropylene Disk Check / Diaphragm Teflon/Santoprene Teflon/Teflon Wt. 4.70 2.50 Price Each
1/2 Inch Ports 13 GPM Capability Non-Metallic Wetted Parts

Maximum Flow Rate: 13 GPM. Displacement: 0.04 Gallons per Cycle. Maximum Operating Pressure: 100 PSI. Suspended Solids Capability: 3/32 inch diameter. Maximum Dry Suction Lift: 10 ft. (Teflon fitted). Fluid Ports: 1/2 NPT Inlet. 1/2 NPT Outlet. Air Inlet: 1/4 NPT. Recommended Filter/Regulator : page 656

Catalog Part No. C1BX83 Aro Model 66605J-311 Air Motor Polypropylene Wetted Parts Polypropylene Check Valve Seats Polypropylene Ball Check / Diaphragm Neoprene / Neoprene Other Features Single Piece Manifold Wt. 9.00 Price Each
126
Pumps & Accessories


Catalog Part No. Aro Model Air Motor Polypropylene Wetted Parts Polypropylene Check Valve Seats Polypropylene Ball Check / Diaphragm Nitrile / Nitrile Other Features Wt. 9.24 Price Each
C1BX79 666053-322
Service Kits & Parts for Aro 1/2 Inch Diaphragm Pumps
Catalog Part No. Part Number Service Kit, Air Motor Service Kit, Diaphragm Material, Neoprene Description Wt. 0.18 0.32 Price Each C1BW98 637141
C1BW94 637140-11
1 Inch Ports 35 GPM Capability Metallic Wetted Parts

Maximum Flow Rate: 35 GPM. Displacement: 0.16 Gallons per Cycle. Maximum Operating Pressure: 120 PSI. Suspended Solids Capability: 1/8 inch diameter. Maximum Dry Suction Lift: 20 ft. (Rubber fitted). Fluid Ports: 1 inch NPT Inlet. 1 inch NPT Outlet. Air Inlet: 1/4 NPT. Recommended Filter/Regulator: page 656 1 Inch Ports 35 GPM Capability Metallic Wetted Parts
Catalog Part No. Aro Model Air Motor Aluminum Wetted Parts Aluminum Check Valve Seats Polypropylene Ball Check / Diaphragm Acetal / Buna-N Other Features Wt. 20.18 Price Each
Fluid Conveying
C1BX87 666100-362-C
Service Kits & Parts for Aro 1 inch Metallic Diaphragm Pumps
Catalog Part No. C1CB72 C1DT74 Part Number Ball, Acetal Diaphragm, Buna-N O-Ring, Nitrile, 3/32 x 1-9/16 OD Service Kit, Diaphragm Material, Buna-N 90533-2 Y325-126 Description Wt. 0.10 0.50 0.01 0.93 Price Each C1CB70 90532-6
C1BW93 637119-62-C
127
Pumps & Accessories

Centrifugal Pumps
Centrifugal Pumps for Agricultural Spraying

Hypro centrifugal pumps are ruggedly built for reliability in higher capacity spraying systems. They handle a broad spectrum of spraying solutions from liquid fertilizers to ag chemicals to wettable powders. Housings are available in cast iron and polypropylene (Polypropylene pumps are light weight and provide maximum resistance to corrosive chemicals and acid fertilizers). Impellers are balanced for smooth operation and are precision molded of tough plastic for excellent corrosion resistance.
Hypro 9300C Series Hydraulic Motor Driven Centrifugal Pumps To 114 GPM / 180 PSI
Ratings: 82-190 GPM Max. Flow, 130-180 PSI Max. Pressure, 140F Max. Fluid Temperature. Features: Hydraulic motor drive (for open and closed center systems). 9302 Model Ports: 1-1/4 NPT Inlet, 1 NPT Outlet. 9303C Model Ports: 1-1/2 NPT inlet, 1-1/4 NPT outlet. 9304C Model Ports: 2 NPT inlet, 1-1/2 NPT outlet. Hydraulic Motor Ports: 1/2 NPT Cast iron pump housing. Viton/Ceramic pump shaft seals standard (Buna-N/Ceramic and Viton/Silicon Carbide available). Double lip Teflon hydraulic motor shaft seal.
Catalog Part No. Hypro Model Hydraulic System Type Hydraulic Motor Capacity Seals Performance At Hydraulic Motor Capacity 100GPM 10PSI 85GPM 20PSI 67GPM 30PSI 48GPM 40PSI 22GPM 50PSI 55GPM 60PSI 61GPM 70PSI 48GPM 80PSI 33GPM 90PSI 20GPM 100PSI Wt. Price Each
C1JN11
9302ST-GM1 Stainless Pump Casing, Polypropylene Impeller
Open & Closed Center
3 GPM 2000 PSI
Life Guard Silicon Carbide
26.00
128
Pumps & Accessories

Centrifugal Pumps
Catalog Part No. Hypro Model Hydraulic System Type Hydraulic Motor Capacity Seals Performance At Hydraulic Motor Capacity 110GPM 10PSI 97GPM 20PSI 92GPM 30PSI 86GPM 40PSI 77GPM 50PSI 64GPM 60PSI 48GPM 70PSI 38GPM 80PSI 14GPM 90PSI 123GPM 10PSI 110GPM 20PSI 109GPM 30PSI 107GPM 40PSI 105GPM 50PSI 104GPM 60PSI 102GPM 70PSI 96GPM 80PSI 85GPM 90PSI 76GPM 100PSI 63GPM 110PSI 33GPM 120PSI 13GPM 130PSI Wt. Price Each
C1CC54
9303C-HM4C
7 GPM 2000 PSI
Viton/Ceramic
20.00
C1ZT55
9303C-HM1C
13 GPM 2000 PSI
Viton/Ceramic
26.10
Fluid Conveying
129
Pumps & Accessories

Pump Accessories Foot Brackets
Vickers Foot Brackets (Cast Iron)

Features: Can be used to mount pumps or motors having standard SAE-J 744 2-Bolt mounting flanges. Either pair of diametrically opposed holes may be used. Bolts are included. Material: Cast Iron.
Vickers Foot Brackets (Cast Iron)

Catalog Vickers Vickers Part No. Part No. Model C1BP87 422582 C1BP88 422583 C1BP89 422584 Size Dimensions (inches) A=5.31 B=2.75 C=6.00 D=3.00 E=5.00 F=1.44 G=2.50 H=.50 J=4.19 K=3.78 L=.59 M=2.00 N=.50 P=3.253 Q=.69 R=3/8-16 S=.44 A=7.12 B=3.63 C=6.75 D=3.38 E=5.75 F=1.44 G=2.88 H=.50 J=5.75 K=3.77 L=.59 M=2.00 N=.50 P=4.003 Q=.68 R=1/2-13 S=.68 Wt. 4.20 5.94 Price Each
FB-A-10 2-Bolt SAE A FB-B-10 2-Bolt SAE B FB-C-10 2-Bolt SAE C
A=8.50 B=4.31 C=10.44 D=5.22 E=9.25 F=2.00 G=4.63 H=.62 J=7.13 K=5.18 12.21 L=.75 M=3.00 N=.68 P=5.003 Q=.75 R=5/8-11 S=.68
130
Pumps & Accessories

Water Pump Accessories Foot Valves, Strainers, Skimmers
Foot Valves, Strainers and Skimmers
Foot Valves, Strainers and Skimmers

Catalog Part No. C1FJ25 Model DFVS35 Type Foot Valve Round Hole Strainer Round Hole Strainer Round Hole Strainer Round Hole Strainer Round Hole Strainer Size (in) 3 2 3 3 4 6 Description Threaded Type, Painted Zinc Plated Steel, Straight Pipe Threads (NPSM) Zinc Plated Steel, Pipe Threads (NPT) Zinc Plated Steel, Straight Pipe Threads (NPSM) Zinc Plated Steel, Straight Pipe Threads (NPSM) Zinc Plated Steel, Straight Pipe Threads (NPSM) Mfg. Name Dixon Kuriyama Dixon Kuriyama Kuriyama Kuriyama Wt. 8.08 1.78 2.00 3.08 2.90 6.04 Price Each
C1GA20 RHS200 C1DK11 RHS-35 C1GA22 RHS300 C1GA23 RHS400 C1GA24 RHS600
Fluid Conveying
131
Hydraulic Motors & Accessories

Hydraulic Power & Control Category Page Geroter Motors Char-Lynn H Series (Up to 4600 lb-in torque. Up to 1100 RPM.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Geroler Motors Char-Lynn J Series (Up to 743 lb-in torque. Up to 2458 RPM.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn S Series (Up to 5190 lb-in torque. Up to 963 RPM.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 2000 Series (Up to 8225 lb-in torque. Up to 1042 RPM.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 4000 Series (Up to 10450 lb-in torque. Up to 868 RPM.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 6000 Series (Up to 16580 lb-in torque. Up to 866 RPM.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 10,000 Series (Up to 30460 lb-in torque. Up to 784 RPM.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gear Motors Cross Manufacturing 40 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydreco 1500K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydreco 1500M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permco Box Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Miscellaneous Gear Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vane Motors Vickers 25M through 50M Series (Up to 7500 lb-in torque. Up to 4000 RPM.) . . . . . . . . . . . . . . . . . . . . . . Piston Motors Eaton Medium Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Motor Accessories Overhung Load Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Motor Technical Information & Dimensions Char-Lynn H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn J Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn S Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 2000 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 4000 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 6000 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Char-Lynn 10,000 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cross 40 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydreco 1500K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydreco 1500M Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton Medium Duty Piston Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permco Box Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers 25M-50M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers M2U Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 135 136 139 141 142 143 144 145 146 147 148 149 150 151 476 477 478 482 487 490 493 497 498 500 502 503 504 511
Fluid Conveying
132

Char-Lynn Low-Speed High-Torque Motors
Char-Lynn H Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 1100 Intermittent RPM
Char-Lynn H Series motors are economical, efficient, compact and powerful, and are designed for medium duty applications. These motors have the industry proven spool valve design combined with state-of-the-art gerotors. In addition, a wide variety of mounting flanges, shafts, ports and a low speed valving option provides design flexibility. Direction of shaft rotation and shaft speed can be controlled easily and smoothly throughout the speed range of the motor. Equipment can be driven direct eliminating costly mechanical components. Maximum Case Pressure: 1500 PSI. Fluid Viscosity: Minimum viscosity (at operating temperature) should be the highest of the following: 100SUS or (20 x PSI)/RPM = SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 18/13. Maximum Recommended Operating Temperature: 180 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Manifold Ported Motors: Base Block Mounting Kits page 138 Dimensions & Technical Information: page 476
Char-Lynn H Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 1100 Intermittent RPM
Catalog Char-Lynn Part No. Model C1JW21 C1FE53 C1AG38 101-1700 101-1753 101-1033 C1FE49 101-1704 Displ. (cu.in./rev) 2.2 2.2 2.2 2.8 2.8 2.8 4.5 4.5 5.9 5.9 5.9 7.3 9.7 9.7 11.3 11.3 14.1 14.1 17.9 17.9 17.9 22.6 22.6 22.6 Mounting Flange 2 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt 2 Bolt 4 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt Shaft 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed Ports 7/8-14 St.Thd O-Ring 1/2 NPT 1/2 NPT 7/8-14 St.Thd O-Ring 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 7/8-14 St.Thd O-Ring 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 7/8-14 St.Thd O-Ring 1/2 NPT 1/2 NPT 7/8-14 St.Thd O-Ring 1/2 NPT 1/2 NPT Special Features Price Wt. Each 11.70 11.63 10.91 11.75
C1AG30 101-1025 C1AG21 101-1001 C1AG31 101-1026 C1AG22 101-1002 C1JW15 101-1035 C1AG32 101-1027 C1AG23 101-1003 C1FE51 101-1706 C1AG33 101-1028 C1AG24 101-1004 C1AG34 101-1029 C1AG25 101-1005 C1AG35 101-1030 C1AG26 101-1006 C1AG39 101-1039 C1AG36 101-1031 C1AG27 101-1007 C1AG40 101-1040 C1AG37 101-1032 C1AG28 101-1008
11.75 11.25 12.25 11.50 12.34 12.00 12.00 12.53 13.25 12.50 13.50 12.50 14.00 13.00 10.00 14.42 13.80 15.25 15.50 14.50
133


Parts For Char-Lynn H Series Geroter Motors
Catalog Part No. Part Number Backup Ring, H Series -008 -009 Dust Seal, H Series -007 -008 -009 Flange Seal, H Series -005 -007 -008 -009 Front Flange, 2-Bolt, -008-009 Series Front Flange, 2-Bolt, H Series -008 -009 Front Flange, 4-Bolt, H Series -007 Front Flange, 4-Bolt, -007 Series Front Flange, 4-Bolt, -008-009 Series Front Flange, 4-Bolt, H Series -008 -009 Seal Kit, Buna-N, -005 Series Seal Kit, Buna-N, -007 Series Seal Kit, Buna-N, -008-009 Series Shaft, 1 Inch Straight Keyed with Woodruff key slot, H Series -007 -008 -009 Shaft, SAE 6B Splined, H Series -007 -008 -009 Shaft Seal, H Series -007 Shaft Seal, H Series -008 -009 Torx Head Capscrew, H Series -007 -008 -009 Woodruff Key, H Series -005 -007 -008 -009 Description Wt. 0.01 0.02 0.01 1.83 1.83 1.10 1.10 1.08 1.08 0.04 0.05 0.05 1.52 1.49 0.01 0.01 0.03 0.02 Price Each
C1AB11 0022002-000 C1AA62 0009121-002 C1AA60 0009091-001 C1AA98 0022000-001 C1AA98 0022000-001 C1AA27 0007464-000 C1AA27 0007464-000 C1AA99 0022000-002 C1AA99 0022000-002 C1AB40 0060036-000 C1AB38 0060023-000 C1AB43 0060540-000 C1AA21 0007360-001 C1AA22 0007360-002 C1AA53 0009057-001 C1AA56 0009057-014 C1AA72 0016292-088 C1AA66 0014193-000
Fluid Conveying
134

Char-Lynn J Series Geroler Motors Up to 743 lb-in Intermittent Torque, 2458 Intermittent RPM
Char-Lynn J Series motors pack a lot of power in a very small package. These motors feature a Geroler design, spool valving, high radial shaft load capability and case drain port. Maximum Case Pressure: 1100 PSI (Without case drain). For continuous back pressure over 1100 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 100-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 18/13. Maximum Recommended Operating Temperature: 180 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 477
Char-Lynn J Series Geroler Motors Up to 743 lb-in Intermittent Torque, 2458 Intermittent RPM
Catalog Part No. C1AJ71 Char-Lynn Model 129-0018 Displ. (cu.in./rev) 0.79 Mounting Flange Shaft Ports Special Features Wt. 4.76 Price Each
Fluid Conveying
Case Drain 5 Bolt 5/8 in. Straight Keyed 9/16-18 St.Thd. O-Ring 3/8-24 St.Thd., 1/4-28UNF Side Ports Low Gloss Black Paint Case Drain 5 Bolt 9/16-18 St.Thd. O-Ring 3/8-24 St.Thd., 5/8 in. Straight Keyed 1/4-28UNF Side Ports Low Gloss Black Paint 5 Bolt 9/16-18 St.Thd. O-Ring 1/4-28UNF 5/8 in. Straight Keyed End Ports Case Drain 3/8-24 St.Thd.
C1JX28
129-0019
1.21
4.80
C1AJ70
129-0004
1.93
5.15
C1JX29
129-0020
1.93
Case Drain 5 Bolt 5/8 in. Straight Keyed 9/16-18 St.Thd. O-Ring 3/8-24 St.Thd., 1/4-28UNF Side Ports Low Gloss Black Paint
5.00
135

Char-Lynn S Series Geroler Motors Up to 5190 lb-in Intermittent Torque, 963 Intermittent RPM
Char-Lynn S Series motors with Geroler offer the same advantage of low speed, high torque and compact size as the H Series with geroter. In the Geroler, element precision machined rollers form the displacement chambers. The rollers provide support with rolling contact as the star rotates, minimizing friction and providing high efficiency, especially at start-up and at low speeds. Maximum Case Pressure: 1500 PSI. Fluid Viscosity: 70 SUS at operating temperature. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 18/13. Maximum Recommended Operating Temperature: 180 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Manifold Ported Motors: Base Block Mounting Kits page 138 Dimensions & Technical Information: page 478
Fluid Conveying
Char-Lynn S Series Geroler Motors Up to 5190 lb-in Intermittent Torque, 963 Intermittent RPM
Catalog Part No. C1JW30 C1FE57 C1AG74 C1FH58 Char-Lynn Model 103-1537 103-1540 103-1010 103-1035 Displ. (cu.in./rev) 3.6 3.6 4.6 4.6 4.6 5.7 5.7 5.7 7.3 10.1 10.1 10.1 10.1 11.4 11.4 13.7 13.7 13.7 17.9 18.2 18.2 22.7 22.7 22.7 22.7 Mounting Flange 2 Bolt 2 Bolt 2 Bolt 4 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 2 Bolt 4 Bolt 4 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt 2 Bolt 2 Bolt 4 Bolt 2 Bolt 4 Bolt 4 Bolt 4 Bolt Shaft 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed 1 in. Straight Keyed Ports 7/8-14 St.Thd. O-Ring 1/2 NPT 1/2 NPT 7/8-14 St.Thd. O-Ring 1/2 NPT 7/8-14 St.Thd. O-Ring 1/2 NPT 1/2 NPT 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 1/2 NPT 7/8-14 St.Thd. O-Ring 1/2 NPT 1/2 NPT 1/2 NPT 7/8-14 St.Thd. O-Ring 1/2 NPT 1/2 NPT 7/8-14 St.Thd O-Ring 1/2 NPT 1/2 NPT 1/2 NPT Manifold 7/8-14 St.Thd. O-Ring 1/2 NPT Special Features Wt. 14.80 15.27 15.50 14.84 15.00 15.67 16.00 15.50 16.05 17.02 17.25 12.00 16.50 17.55 17.00 20.00 18.50 17.75 20.25 20.25 18.75 20.75 20.10 20.00 20.00 Price Each
C1AG78 103-1026 C1AG67 103-1002
C1AG79 103-1027 C1AG68 103-1003 C1HC88 103-1538 C1ZZ49 C1AG75 103-1036 103-1012 C1AG80 103-1028 C1AG69 103-1004 C1AG81 103-1029 C1AG70 103-1005 C1AG85 103-1038 C1AG82 103-1030 C1AG71 103-1006 C1EL53 103-1039 C1AG83 103-1031 C1AG72 103-1007 C1AG84 103-1032 C1JC41 103-1024 C1AG77 103-1016 C1AG73 103-1008
136

Parts For Char-Lynn S Series Geroler Motors
Catalog Part No. Part Number Backup Ring, S Series -009 -010 Dust Seal, S Series -008 -009 -010 Flange Seal, S Series -006 -007 -008 -009 -010 Front Flange, 2-Bolt, -009-010 Series Front Flange, 2-Bolt, S Series -009 -010 Front Flange, 4-Bolt, -007-008 Series Front Flange, 4-Bolt, S Series -007 -008 Front Flange, 4-Bolt, -009-010 Series Front Flange, 4-Bolt, S Series -009 -010 Seal Kit, Buna-N, -007 Series Seal Kit, Buna-N, -008 Series Seal Kit, Buna-N, -009-010 Series Seal Kit, Buna-N, contains poppet, -012 Series Shaft, 1 Inch Straight Keyed with Woodruff key slot, S Series -008 -009 -010 Shaft, SAE 6B Splined, S Series -008 -009 -010 Shaft Seal, S Series -007 -008 Shaft Seal, S Series -009 -010 Torx Head Capscrew, S Series -008 -009 -010 Woodruff Key, S Series -006 -007 -008 -009 -010 Description Wt. 0.01 0.02 0.01 1.83 1.83 1.10 1.10 1.08 1.08 0.05 0.05 0.05 0.05 1.52 1.49 0.01 0.01 0.03 0.02 Price Each
C1AB11 0022002-000 C1AA62 0009121-002 C1AA60 0009091-001 C1AA98 0022000-001 C1AA98 0022000-001 C1AA27 0007464-000 C1AA27 0007464-000 C1AA99 0022000-002 C1AA99 0022000-002 C1AB39 0060026-000 C1AB41 0060533-000 C1AB42 C1JC65 0060539-000 9900101-000
C1AA21 0007360-001 C1AA22 0007360-002 C1AA53 0009057-001 C1AA56 0009057-014 C1AA72 0016292-088 C1AA66 0014193-000
137

Char-Lynn H & S Series Base Block Mounting Kits
Fluid Conveying
Char-Lynn H & S Series Base Block Mounting Kits

Catalog Part No. C1AJ48 Char-Lynn Model 123-1007 Description 7/8-14 St.Thd. O-Ring Ports Wt. 2.88 Price Each
138

Char-Lynn 2000 Series Geroler Motors Up to 8225 lb-in Intermittent Torque, 1042 Intermittent RPM
Char-Lynn 2000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. Heavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 2000 PSI (Without case drain). For continuous back pressure over 2000 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 100-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 18/13. Maximum Recommended Operating Temperature: 180 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 482
Catalog Char-Lynn Displ. Part No. Model (cu.in./rev) C1AG95 104-1001 4.9 4.9 6.2 6.2 6.2 8 8 8.0 9.6 9.6 9.6 9.6 11.9 11.9 11.9 11.9 11.9 14.9 14.9 14.9 14.9 14.9 18.7 18.7 18.7 C1AH12 104-1022 C1AG96 104-1002 C1AH13 104-1023 C1EV49 104-1030 C1AG97 104-1003 C1AH14 104-1024 C1JW54 C1JW39 C1JW47 C1JB95 C1AG98 C1JW48 C1JW43 C1HL55 C1JW40 C1AH20 C1JW53 C1AH53 104-1386 104-1004 104-1064 104-1011 104-1005 104-1065 104-1033 106-1012 104-1006 104-1034 104-1198 106-1013 Mounting Flange 2 Bolt SAE A 2 Bolt SAE A 2 Bolt SAE A 2 Bolt SAE A 4 Bolt 2 Bolt SAE A Shaft 1 in. Straight Keyed 1 in. Straight Keyed SAE C Splined 14T 1 in. Straight Keyed 32mm Straight Keyed 1 in. Straight Keyed Ports 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring G 1/2 BSP 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring Ports 180 Apart 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring Ports 180 Apart 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 1 in. Straight Keyed 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring Ports 180 Apart Special Features Price Wt. Each 23.03 23.00 23.35
2 Bolt SAE A 1-1/4 in. Straight Keyed 2 Bolt SAE A 1-1/4 in. Straight Keyed
23.59 23.74 24.11 24.25 21.50 22.00 24.50 22.00 2.68 25.00 25.25 23.00 23.00 20.36 18.00 27.00 26.00 24.00 20.56 27.10 27.75 27.75
2 Bolt SAE A 1-1/4 in. Straight Keyed
C1AH15 104-1025
2 Bolt SAE A 1-1/4 in. Straight Keyed 2 Bolt SAE A 2 Bolt SAE A 1-1/4 in. Tapered 1 in. Straight Keyed
2 Bolt SAE A 1-1/4 in. Straight Keyed 1-1/16-12 St.Thd. O-Ring
C1AH16 104-1026
2 Bolt SAE A 1-1/4 in. Straight Keyed 2 Bolt SAE A Bearingless 2 Bolt SAE A 2 Bolt SAE A 2 Bolt SAE B Bearingless 2 Bolt SAE A 2 Bolt SAE A 1-1/4 in. Straight Keyed SAE C Splined 14T None 1 in. Straight Keyed SAE C Splined 14T SAE 6B Splined
C1AH17 104-1027
C1AG99 104-1007 C1AH18 104-1028 C1AH22 104-1067
139


Catalog Char-Lynn Displ. Part No. Model (cu.in./rev) C1AH21 104-1035 C1GJ55 C1JW45 C1JW51 C1JC18 106-1014 104-1044 104-1068 105-1060 18.7 18.7 24.0 24 24.0 24 24 29.8 29.8 Mounting Flange 2 Bolt SAE A Bearingless 2 Bolt SAE A Shaft SAE C Splined 14T None 1 in. Straight Keyed Ports 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 1-1/16-12 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring Ports 180 Apart 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring 7/8-14 St.Thd. O-Ring Ports 180 Apart Special Features Price Wt. Each 27.50 22.46 26.00 29.75 26.00 29.50 32.46 32.00 30.00
C1AH23 104-1228 C1AH24 104-1229
2 Bolt SAE A 1-1/4 in. Straight Keyed 2 Bolt SAE A Wheel Motor 2 Bolt SAE A SAE C Splined 14T 1-1/4 in. Tapered SAE C Splined 14T
C1AH25 104-1420 C1AH26 104-1422
Parts For Char-Lynn 2000 Series Geroler Motors

Catalog Part No. Part Number Description Backup Ring, 2000 Series -003 -004 -005 -006 Drive for 24 cu.in./rev, 2000 Series -003 -004 -006 Drive for 29.8 cu.in./rev, 2000 Series -006 Dust Seal, 2000 Series -003 -004 -005 -006 Key for 1-1/4 Tapered Shaft Nut for 1-1/4 Tapered Shaft Seal Kit, Buna-N, Standard & Wheel Motors, -003-004-005 Series Seal Kit, Buna-N, Bearingless Motors, -006 Series Seal Kit, Buna-N, Standard & Wheel Motors, -006 Series Seal Kit, Buna-N, Wheel Motors with Seal Guard, -006 Series Seal Kit, Viton, Standard & Wheel Motors, -006 Series Shaft & Bearing Kit, 1 Inch Straight Keyed, 2000 Series -006 Shaft & Bearing Kit, 1 inch 6B Splined, -006 Series Shaft & Bearing Kit, 1-1/4 Inch Straight Keyed, 2000 Series -006 Shaft & Bearing Kit, 14 Tooth Splined, 2000 Series -006 Shaft & Bearing Kit, 1-1/4 Inch Tapered, 2000 Series -006 Shaft Seal, 2000 Series -003 -004 -005 -006 Wear Plate, 2000 Series -006 Wt. 0.01 0.95 1.00 0.05 0.03 0.13 0.07 0.04 0.07 0.09 0.07 3.57 3.50 3.86 3.72 3.58 0.02 1.80 Price Each C1AA23 0007382-000 C1AA81 0021371-008 C1AA82 0021371-012 C1AA61 0009121-001 C1JM36 0014392-006 0014163-000 C1AA65
Fluid Conveying
C1AB50 0061252-000 C1AB52 0061259-000 C1AB51 C1JL43 C1AB53 C1AA89 C1JS71 C1AA90 0061258-000 0061289-000 0061263-000 0021618-001 0021618-005 0021618-002
C1AA92 0021618-004 C1AA91 0021618-003 C1AA54 0009057-009 C1AB12 0022102-000
140

Catalog Char-Lynn Displ. Part No. Model (cu.in./rev) C1JW75 C1JL75 C1AH64 C1AH66 C1AH65 109-1102 109-1110 109-1105 109-1112 109-1106 9.9 12.5 19 19.0 24 Mounting Flange 4 Bolt SAE B 4 Bolt SAE B Shaft 1-5/8 in. Tapered 1-5/8 in. Tapered Ports 1-1/16-12 St.Thd. O-Ring 1-1/16-12 St.Thd. O-Ring Special Features Price Wt. Each 38.10 41.01 40.00 43.00
4 Bolt SAE B 1-1/4 in. Straight Keyed 1-1/16-12 St.Thd. O-Ring 4 Bolt SAE B 1-1/4 in. Straight Keyed 1-1/16-12 St.Thd. O-Ring 4 Bolt SAE B 1-1/4 in. Straight Keyed 1-1/16-12 St.Thd. O-Ring
60.00

Catalog Part No. Part Number Description Seal Kit, Rear, Buna-N, Standard & Wheel Motors, -004-006 Series Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -004-006 Series Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -004 Series Shaft & Bearing Kit, 1-1/4 Inch Straight Keyed, 4000 Series -006 Shaft & Bearing Kit, 1-5/8 Inch Tapered, 4000 Series -006 Wt. 0.04 0.06 0.05 5.19 5.82 Price Each
C1AB46 0061234-000 C1AB55 0061281-000 C1AB47 0061236-000 C1FH88 0023310-001 C1EZ85 0023310-002
141

Fluid Conveying
Catalog Part No. C1AH84 C1AH80 C1AH85 C1AH81 Char-Lynn Model 112-1067 112-1061 112-1068 112-1062 113-1074 112-1069 Displ. (cu.in./rev) 23.9 23.9 30.0 30.0 30.0 60.0 60 Mounting Flange 4 Bolt SAE C 4 Bolt SAE C Wheel Motor 4 Bolt SAE C Shaft SAE CC Splined 17T SAE CC Splined 17T 1-3/4 in. Tapered SAE CC Splined 17T Ports 1-5/16-12 St.Thd. O-Ring 1-5/16-12 St.Thd. O-Ring 1-5/16-12 St.Thd. O-Ring 1-5/16-12 St.Thd. O-Ring Special Features Wt. 63.00 95.00 65.00 59.50 37.00 65.00 76.00 Price Each
4 Bolt SAE C 1-1/2 in. Straight Keyed 1-5/16-12 St.Thd. O-Ring 4 Bolt SAE C 1-1/2 in. Straight Keyed 1-5/16-12 St.Thd. O-Ring
C1JW96 C1AH86
4 Bolt SAE C 1-1/2 in. Straight Keyed 1-5/16-12 St.Thd. O-Ring
C1AH82 112-1063

Catalog Part No. Part Number Key for Tapered Shaft Models Key for Tapered Shaft, 6000 Series Seal Kit, Rear, Buna-N, Standard & Wheel Motors, -005 Series Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -005 Series Shaft and Bearing Kit (1-1/2 inch Straight), 6000 Series Shaft & Bearing Kit, 1-3/4 Inch Tapered, 6000 Series -006 Description Wt. 0.07 0.07 0.05 0.07 7.30 7.75 Price Each
C1FV49 0014394-007 C1FV49 0014394-007 C1AB49 0061238-000
C1AB48 C1KH37 C1FW19
0061237-000 0201837-001 0201837-002
142

Char-Lynn 10,000 Series Geroler Motors Up to 30460 lb-in Intermittent Torque, 784 Intermittent RPM
Char-Lynn 10,000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. Heavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 300 PSI (Without case drain). For continuous back pressure over 300 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: 100-200 SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 18/13. Maximum Recommended Operating Temperature: 180 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 493
Char-Lynn 10,000 Series Geroler Motors Up to 30460 lb-in Intermittent Torque, 784 Intermittent RPM
Catalog Part No. C1AJ24 C1AJ25 C1AJ26 C1JX24 C1AJ27 Char-Lynn Displ. Model (cu.in./rev) 119-1028 119-1029 119-1030 121-1013 119-1031 21.0 29.3 40.6 40.6 57.4 Mounting Flange 4 Bolt SAE C 4 Bolt SAE C 4 Bolt SAE C Bearingless 4 Bolt SAE C Shaft 2-1/4 in. Straight Keyed 2-1/4 in. Straight Keyed 2-1/4 in. Straight Keyed None 2-1/4 in. Straight Keyed Ports 1-5/16-12 St.Thd. O-Ring 1-5/16-12 St.Thd. O-Ring 1-5/16-12 St.Thd. O-Ring 1-1/4 Code 61 Split Flange 1-5/16-12 St.Thd. O-Ring Special Features Wt. 96.00 50.00 101.00 Price Each
73.00 106.00
Parts For Char-Lynn 10,000 Series Geroler Motors

Catalog Part No. C1HY24 C1EZ84 Part Number 0009002-004 0008573-004 Description Front Thrust Bearing, 10,000 Series -002 -003 -004 Geroler, 57.3 cu.in./rev, 10,000 Series -002 -003 -004 Seal Kit, Shaft, Buna-N, -002-003-004 Series Seal Kit, Motor, Buna-N, -002-003-004 Series Shaft, 2-1/4 Straight Keyed, 10,000 Series -002 -003 -004 Thrust Washer, 10,000 Series -002 -003 -004 Rear Thrust Washer, 10,000 Series -002 -003 -004 Thrust Washer (Thin), 10,000 Series -002 -003 -004 Wear Plate, 10,000 Series -002 -003 -004 Wt. 0.05 17.16 0.07 0.06 Price Each
C1AA18 0006406-000 C1AA17 0006405-000 C1ZZ94 C1HY23 C1HY21 C1HY22 C1ZZ93 0008484-000 0009001-004 0009001-002 0009001-003 0008958-000
11.36 0.10 0.07 0.03 8.46
143

Gear Motors
Cross 40 Series Gear Motors Internal Check Valves for Bi-Rotational Capability
Features: Improved gear tooth design and pressure-balanced loading plates provide for a high volumetric and overall efficiency, while operating at a low noise level. Bi-directional design using internal check valves. Die-cast aluminum alloy body and end covers. Sintered metal gears. Hardened steel shaft. Pressure lubricated, Teflon impregnated sleeve bearings, Buna-N seals. Application: Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: Inlet: 3000 PSI Rated Working Pressure, 3500 PSI Maximum Shock Pressure. Outlet: Pressures over 250 PSI require a case drain line be installed. Rated Speeds: Up to 3000 RPM. Note: Ratings based on using anti wear hydraulic fluid. Dimensions: page 497 Foot Brackets: page 130 Cross 40 Series Gear Motors Internal Check Valves for Bi-Rotational Capability
Catalog Part No. Cross Model Displacement PressureRating Mtg Max Speed Flange 0.50 in/rev 3000 PSI 3000 RPM 2-Bolt SAE A Shaft 5/8 St.Keyed x 1.25 Long 3/4 St.Keyed X 2.31 Long 5/8 St.Keyed x 1.25 Long 5/8 St.Keyed x 1.25 Long 5/8 St.Keyed x 1.25 Long 5/8 St.Keyed x 1.25 Long Ports SAE-12 Side Ports Other Features Bi-Rotational Wt. 3.08 Price Each
Fluid Conveying
C1BN94 40MH05DACSC
C1KK31
0.5 in/rev 2-Bolt 40MH05DAKSC 3000 PSI 3000 SAE A RPM 0.75 in/rev 3000 PSI 3000 RPM 1.00 in/rev 3000 PSI 3000 RPM 1.25 in/rev 3000 PSI 3000 RPM 1.80 in/rev 3000 PSI 3000 RPM 2-Bolt SAE A 2-Bolt SAE A 2-Bolt SAE A 2-Bolt SAE A
SAE-12 Side Port
Bi-Rotational
6.75
C1BN95 40MH07DACSC
SAE-12 Side Ports
Bi-Rotational
6.85
C1EN35 40MH10DACSC
SAE-12 Side Ports
Bi-Rotational
6.00
C1EN36 40MH12DACSC
SAE-12 Side Ports
Bi-Rotational
8.00
C1JD42
360036
SAE-12 Side Ports
Bi-Rotational
8.36
Parts For Cross 40 Series Motors

Catalog Part No. Part Number Shaft Seal, High Pressure (250 PSI) Shaft only (no gear), 3/4 Straight Keyed, for 1.00 in/rev model Description Wt. 0.04 0.72 Price Each
C1BW20 5A0081 C1HZ92 4P0021-026
144

Gear Motors
Hydreco 1500K Series Gear Motors Internal Check Valves for Bi-Rotational Capability
Features: Heavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the output shaft. Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: Inlet: (Varies with displacement. See table below). Outlet: Pressures over 150 psi require a case drain line be installed (Bi-Directional applications require a motor with Bi-Rotational feature, and a case drain line be installed). Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 180F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 10 Micron Absolute for maximum motor life. Dimensions & Technical Information: page 498 Foot Brackets: page 130 Hydreco 1500K Series Gear Motors Internal Check Valves for Bi-Rotational Capability
Displacement Catalog PressureRating Mtg Part No. Hydreco Model Max Speed Flange C1AK92 1515KC3A1AB 1.771 in/rev 2500 PSI 3600 RPM 2-Bolt SAE A Shaft 5/8 St.Keyed x 2.25 Long Ports 3/4 NPT Side & Rear (Side Ports Plugged) Other Features Bi-Rotational, Shielded Outboard Bearing Wt. 18.65 Price Each
145

Gear Motors
Hydreco 1500M Series Gear Motors Mechanical Face Seal for Bi-Rotational Capability
Features: Heavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. All models have mechanical face seal which allows for high back pressures with no case drain. Pressure Limits: 2000 PSI. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 180F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 10 Micron Absolute for maximum motor life. Dimensions & Technical Information: page 500 Foot Brackets: page 130 Hydreco 1500M Series Gear Motors Mechanical Face Seal for Bi-Rotational Capability
Displacement Catalog PressureRating Mtg Part No. Hydreco Model Max Speed Flange C1AK78 1506MC3E1BB 0.738 in/rev 2000 PSI 3600 RPM 1.180 in/rev 2000 PSI 3600 RPM 1.467 in/rev 2000 PSI 3600 RPM 1.467 in/rev 2000 PSI 3600 RPM 2-Bolt SAE A 2-Bolt SAE A 2-Bolt SAE A 4-Bolt Foot Mount Shaft 5/8 St.Keyed x 2.00 Long 5/8 St.Keyed x 2.00 Long 5/8 St.Keyed x 2.00 Long 5/8 St.Keyed x 2.00 Long Ports 3/4 NPT Rear Ports Other Features Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Wt. 17.07 Price Each
Fluid Conveying
C1AK83 1510MC3E1BB
3/4 NPT Rear Ports
16.79
C1AK88 1512MC3E1BB
3/4 NPT Rear Ports
17.00
C1AK89
1512MC3G1BB
3/4 NPT Rear Ports
20.00
Parts for Hydreco 1500M Series Motors

Catalog Part No. Part Number Seal Kit for 1500M Series Motors Description Wt. 0.17 Price Each
C1DK90 SKO362
146

Gear Motors
Permco Box Motors Internal Check Valves for Bi-Rotational Capability

Features: Motors are stocked with Permco's "Continental Shaft" (Shaft can be changed without motor disassembly by removing shaft retaining snap ring and pulling shaft and bearing out). This allows for an easy shaft change to satisfy various applications. Special iron alloy used for shaft covers, gear housings, bearing carriers and port end cover castings. Gears are cut to extremely close tolerances, and are shaped (rather than hobbing and shaving) for maximum volumetric efficiency. Application: All motors have both side and rear ports (The 2 unused ports need to be plugged). All motors are bi-rotational and may be used as bi-rotational pumps. All models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: Inlet: 2500 PSI. Outlet: Pressures over 50 PSI require a case drain line be installed. Rated Speeds: 2000 RPM. Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 150F. Never to exceed 185F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B10 rating of at least 2.2. Dimensions & Technical Information: page 503 Foot Brackets: page 130 Permco Box Motors Internal Check Valves for Bi-Rotational Capability
Displacement Catalog PressureRating Mtg Part No. Permco Model Max Speed Flange C1DG94 PEK10C 2.00 in/rev 2500 PSI 2000 RPM 3.00 in/rev 2500 PSI 2000 RPM 4.00 in/rev 2500 PSI 2000 RPM 4.50 in/rev 2500 PSI 2000 RPM 5.15 in/rev 2500 PSI 2000 RPM 5.79 in/rev 2500 PSI 2000 RPM 6.40 in/rev 2500 PSI 2000 RPM Shaft Ports Other Features Bi-Rotational, Case Drain Wt. 32.95 Price Each
2/4 Bolt 13 Tooth SAE 1 NPT Side and SAE B B Splined Rear 2/4 Bolt 13 Tooth SAE 1 NPT Side and SAE B B Splined Rear 2/4 Bolt 13 Tooth SAE 1-1/4 NPT Side, SAE B B Splined 1 NPT Rear 4 Bolt 13 Tooth SAE 1-1/4 NPT Side SAE B B Splined and Rear 4 Bolt 13 Tooth SAE 1-1/4 NPT Side SAE B B Splined and Rear 4 Bolt 13 Tooth SAE 1-1/4 NPT Side SAE B B Splined and Rear 4 Bolt 13 Tooth SAE 1-1/2 NPT Side, SAE B B Splined 1-1/4 NPT Rear
C1DG95 PEK15C
Bi-Rotational, Case Drain
36.00
C1DG96 PEK20C
38.65
C1DG97 PEL17C
47.00
C1DG98 PEL20C
47.00
C1DG99 PEL22C
49.52
C1DH11 PEL25C
47.00
147

Gear Motors
Miscellaneous Gear Motors

Contact us for more information.
Miscellaneous Gear Motors

Catalog Part No. Mfg. Part No. Mfg Name Displ (in/rev) Mount Permco 1.00 SAE A 2-Bolt Shaft Ports Other Rot. Features Wt. 25.00 Price Each 3/4 Straight 3/4 NPT Bi-Rot Rear Keyed
C1DD58 M3000C783LDZA05(M3000C783LDZA05-24)
Fluid Conveying
148

Vickers 35M Series Vane Motors Up to 2875 lb-in Intermittent Torque Up to 4000 Intermittent RPM
Vickers 35M Series Vane Motors

Unless noted otherwise, all motors have: 2-Bolt SAE C Mounting Flange. 1-1/2" SAE 4-Bolt Flange Ports. 3/8 NPT Drain Port (in rear cover). Application Information: page 504 Specifications: page 505 Model Codes: page 506 Dimensions: page 508 Replacement Parts: page 149 Port Flange Kits: Flanges page 1085 Foot Brackets: page 130 Maximum Continuous Speed & Pressure: 3600 RPM @ 500 PSI, 2600 RPM @ 2250 PSI. Maximum Intermittent Speed & Pressure: 4000 RPM @ 500 PSI, 3000 RPM @ 2500 PSI. Intermittent Ratings: (10% of total operating time; each application of pressure and/or speed not to exceed 6 seconds).
Motors are stocked as shown in table. ANY cover position is available for same-day shipment. See Model Codes page to select a different model code.
Vickers 35M Series Vane Motors
Catalog Part No. C1BL65 C1BL63 Vickers Part No. Vickers Model See Note Above See Note Above 312065-3 312062-3 35M115A-1C20 Shaft 1-1/4 Straight Keyed Displ Torque Cu.Inch Ring Per 100 Per Rev Size PSI (lb-in) 7.44 7.44 115 115 115 115 Cover Position Wt. Price Each
Fluid Conveying
Port Connections 64.00 In-line (C) Port Connections 64.00 In-line (C)
35M115A-11C20 14 Tooth SAE C Splined
Vickers Part No. 312065-3 312062-3
Vickers Model 35M115A-1C20 35M115A-11C20
Ring Size 115 115
Cartridge Kit 923167 923167
Shaft 310872 1-1/4"-Straight-Keyed 310873 14Tooth-SAE-C-Splined
Shaft Key Shaft Seal 217596 -394973 394973
Seal Kit 923163 923163
Vickers 35M Vane Motors Replacement Parts List

Catalog Part No. C1CC29 C1BL60 C1BC42 Part Number 923167 310872 217596 Cartridge Kit, Ring Size 115 Seal Kit, Buna-N #1 Shaft, 1-1/4" Straight Keyed Shaft Key, 5/16 x 1-1/8 Shaft Seal, Buna-N Description Wt. 17.00 0.10 2.04 0.03 0.07 Price Each
C1CC26 923163
C1BN19 394973
149

Eaton Piston Motors
Eaton Medium Duty Piston Motors

Features: Compact Lightweight Durable Housing Numerous Shaft Options SAE Mounting Flanges SAE O-Ring Porting Dual Rotation Various Porting Options Fixed Displacements Pressure Limits: Main Ports: Varies with displacement, see table below. Case: 25 PSI limit for 0.60 thru 2.48 cu.in./rev models, 100 PSI limit for 5.04 cu.in./rev model. Rated Speed: Varies with displacement, see table below. Inlet Temperature: 225F maximum continuous. Case Drain: CAUTION - Failure to meet these requirements may result in damage to the piston motor. Install piston motors in such a position that the case drain assures an oil level at or above unit center line. Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the motor must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Oil level must be at or above the unit center line before starting the piston motor. Provide a case drain line of adequate size to limit the case pressure to specified maximum. Fluid Recommendations: ISO 4406 Cleanliness Level 18/13 or cleaner. Recommended Filtration: 60-180 SSU Optimum, 60 SSU Minimum, 2000 SSU Maximum (cold start). Dimensions: page 502
Fluid Conveying

Catalog Part No. Eaton Model Displacement Max Speed 2.01 3600rpm Pressure Ratings 3000 PSI Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent 3000 PSI Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent 3000 PSI Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent 3000 PSI Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent Mounting Flange SAE B 2-Bolt Shaft 13T SAE B Splined Ports Side Ports: SAE-16 Work, SAE-8 Case Drain Other Features Wt. Price Each
C1HE22
74315-DCU
20.00
C1KD79
74315-DAH
2.01 3600rpm
SAE B 2-Bolt
Plugged Side Main Ports: 13T SAE B SAE-12 Case Drains: Speed Sensor Port, 22.00 Splined SAE-8 Bottom, SAE-6 Polyacrylate Upper Rear Shaft Seal Same Side Main Ports: SAE-16 Top Case Drain: SAE-8 Shuttle Valve with 235 PSI LP Relief, M12x1.5 Diagnostic Ports
C1KD81
74318-DBD
2.48 3600rpm
SAE B 2-Bolt
15T SAE BB Splined
24.10
C1HE23
74318-DFW
2.48 3600rpm
SAE B 2-Bolt
13T SAE B Splined
Side Ports: SAE-16 Work, SAE-8 Case Drain
20.00
Parts for Eaton Medium Duty Piston Motors

Catalog Part No. C1KD34 C1KD43 C1KD85 Part Number 70402-649 70423-617 74418-904 Rotating Kit Assembly, Model 74418 Rotating Kit Assembly, 2.77 in, Model 70423 Seal Kit, Model 74418 Description Wt. 5.60 5.10 0.05 Price Each
150

Overhung Load Adaptors
ZERO-MAX / HELLAND Overhung Load Adaptors

Features: Available in SAE flange sizes A, B, C, CC, D and sizes for Char-Lynn H & S Series motors with 4-bolt flange. Housings drilled & tapped for convenient foot mounting. A wide variety of custom input and output shafts are available on special order. Application: Used to protect motors, pumps and brakes from axial and radial stresses created by side loads. Also protects their shaft seals from invasive contaminants (a leading cause of motor failure). Materials: Bodies are made of 25,000 tensile strength cast iron. Shafts are made of 130,000 PSI stress proof steel. Bearing types vary by series. Mounting: Horizontal mounting is standard. (Vertical mounting requires special attention to upper bearing lubrication. Contact us for application assistance). Lubrication: * ALL MODELS ARE SHIPPED WITHOUT LUBRICATION *. Product tables show the amount of lubricant needed for the recommended 2/3 cavity fill. Type of lubrication depends on RPM. 1800 RPM and under: Bearing grease (high quality NLGI No. 1 or No. 2), oil or force feed systems. 1800 to 2500 RPM: Low viscosity oil lubrication or force feed systems. Over 2500 RPM: Force feed oil systems. Contact us for application assistance with oil or force feed systems. Calculating Overhung Load: Overhung Load (in pounds) = (63000 x HP x F) / (RPM x RADIUS). HP = Horsepower. F = 1.00 for single chain drives, 1.10 for timing belt drives, 1.25 for double chain drives, 1.50 for v-belt drives, 2.50 for flat belt drives. RADIUS = Radius of sprocket or pulley in inches. Note: Doubling the Load reduces life to about one-tenth. Doubling the Speed reduces life by one-half.
4-Bolt for Char-Lynn H & S Series Motors

Input Shafts: 1 inch diameter or smaller. Output Shafts: 1 inch male or female, 1-1/2 inch male. Bearings: Deep-grooved ball bearings. Working Life Calculation: Estimated Hours Working Life = 1500 x [Cn / (2.378 x Overhung Load)] See table for model's Cn number, which varies with RPM. Overhung load is in pounds. Calculation based on overhung load applied at 1-3/8 inches out from housing (see side view). Bearing life will increase significantly if load is positioned closer to unit.
4-Bolt for Char-Lynn H & S Series Motors

Catalog Part No. Helland Model Input Output Lube Qty. (oz) 3.38 50 100 200 500 1000 1800 RPM RPM RPM RPM RPM RPM Cn Cn Cn Cn Cn Cn Wt. 2500 1995 1580 1175 925 760 8.79 Price Each
C1BN99 410-OHLA
1 in. Straight Keyed with 1 in. Straight Keyed with 1/4 x 1/8 Key 1/4 x 1/8 Key
151
Hydrostatic Transmissions
Eaton Light Duty Hydrostatic Transmissions Models 6 & 7

The Eaton Light Duty Hydrostatic Transmission consists of a variable displacement radial ball piston hydraulic pump, a fixed displacement radial ball piston hydraulic motor and a system of valves, all contained in one housing. It can be used in many different types of applications where variable output speed is a requirement. Features: Self contained with no external high pressure lines or components. Simplified operation. Fast response with smooth, stepless output power. Positive braking action. Note: Model 7 units include some product refinements, and feature a reduction in noise levels when compared with Model 6 units. Operation: A single lever connected to the pump section controls both speed and direction of the transmission output shaft. Infinite speed control is achieved by varying the displacement ratios between the pump and motor. Displacements: 0.465 in/rev Variable Pump, 0.767 in/rev Fixed Motor. Maximum Speeds: 3600 RPM Input, 2150 RPM Output. Input Horsepower : 4 HP @ 3600 RPM (Maximum). A belt drive is preferred, with the sheave diameter 4 inches or less. Locate the belt drive over the input shaft bearing to minimize side loading. Output Torque: 120 lb.in. Continuous, 180 lb.in. Intermittent, 240 lb.in. Peak. Operating Temperature: 180F (Maximum Continuous). A cooling fan is recommended. Recommended Fluid Viscosity: 80-180 SSU is optimum. 60 SSU is low intermittent limit. 10,000 SSU is high intermittent limit (cold start-up).

Catalog Part No. Eaton Part No. Input Freewheel Output Rotation Reservoir Valve Rotation CW Yes Yes CW Other Features Motor rotated 180 Wt. 22.00 Price Each
C1ZY53 700-022
Output Rotation: When control shaft is rotated ClockWise.
152
Eaton Medium Duty Hydrostatic Transmission Pumps Displacements From 1.24 to 3.00 in/rev
Eaton Medium Duty Hydrostatic Transmissions

Introduction: Variable displacement piston pumps are used in closed loop systems either as a single or tandem pump. Oil is circulated by the pump to the motor and then returned directly back to the pump. A charge supply is used to supplement the closed loop system with oil. The charge supply may be supplied by an internal charge pump (standard) or an external source. Current Models: Manual Controlled: 70160 (1.24in/rev & 1.44in/rev), 70360 (2.48in/rev & 3.00in/rev). Servo Controlled: 72400 (2.48in/rev & 3.00in/rev). Pressure Ratings: Outlet pressure ratings vary, see table below. All models have a 25 PSI maximum allowable case pressure. Max Charge Inlet Vacuum: 6 in. Hg. Max Case Drain Temperature: 225F maximum continuous. Hyd Fluid Viscosity: 60-180 SSU Optimum, 45 SSU Minimum, 10000 SSU Maximum (cold start). Recommended Filtration: ISO 4406 Cleanliness Level 18/13 or cleaner. Case Drain: CAUTION - Failure to meet these requirements may result in damage to the pump & motor The mounting orientation of pumps and motors is unrestricted provided the case drain of the pump and motor remain full Position the case drain such that it assures an oil level at or above unit center line at start-up The case drain line that carries the flow leaving the pump or motor should be connected to the highest drain port on each of the units. This assures that the pump and motor cases remain full Fill the case before starting Oil level must be at or above the unit center line before starting the piston motor Provide a case drain line of adequate size to limit the case pressure to specified maximum. Dimensions: page 512 Eaton Medium Duty Hydrostatic Transmissions
Displ (in/rev) & Speed Rating & Catalog Pressure Mtg Part No. Eaton Part No. Ratings Flange Shaft 3.00 72400-RZX-04 3600rpm SAE 15T (ACGRALJ240 3000psi C1JA21 C2NNAMC000 continuous BB SAE BB 00AAF0D) 5000psi 2-Bolt Splined intermittent Chg Pump Displ Chg Press Control (in/rev) Relief (psi)
Fluid Conveying
Rot
Ports
Other Features
Wt.
Price Each
CW
SAE-16 ChPmp Manual Inlet, Control SAE-16 Servo, Main, Wide SAE-12 Deadband CaseDr
0.84
SAE B 2-Bolt 13T SAE B Splined Auxiliary Pad, SAE-16 Chg Outlet Port C3, SAE-10 250-300 Chg Press Inlet Port C4, 4000 PSI Main Port Reliefs, Cross-Loop Bypass Valve
62.00
Tandem Pumps, Parts for Eaton Medium Duty Hydrostatic Transmissions

Catalog Part No. Part Number 70300-603 70160-902 70360-900 70344-51 Seal Repair Kit, Model 70160 Seal Repair Kit, Single Pump, Model 70360 Valve Plate, CW Rotation, 2.48 in, Model 72400 Description Rotating Kit Assembly, 2.48 in, Model 70360 Wt. 5.46 0.12 0.20 0.42 Price Each
C1KD18 C1KD14 C1KD25 C1KD19
153
Eaton Heavy Duty Hydrostatic Transmission Pumps Series 1 Models 33-76 Series 2 Models 54-105
Eaton Heavy Duty Hydrostatic Pumps Series 1 & Series 2

Series 1 Features: 6000 PSI Pressure Rating. 10,000 Hour B10 Bearing Design Life. Advanced cylinder barrel design permits high speed and pressure. Pistons have long engagement with cylinder bore resulting in low leakage. Hydraulic Servo Control provides low effort operation with low control pressure. High strength swashplates resist deflection under high load. High strength cast iron housings provide greater noise damping and wall strength. Cast iron body geroter charge pumps. Bi-metal bearing plate has steel for high speed and pressure and bronze for greater bearing properties. A wide variety of configurations and options are available (Contact us for additional information). Series 2 Features: 6250 PSI Pressure Rating. Speeds to 4510 RPM. Electronic Controls. The Series 2 Pumps single piece pump housing provides exceptional strength and soundproofing. The high-strength, one-piece swashplate has the swashlever and servo-pin integrated into the swashplate, delivering increased reliability without adding extra weight. A large diameter single servo piston permits pump operation at lower charge pressures, minimizing parasitic charge pump losses for increased overall pump efficiency. A large centering spring, housed within the servo piston, returns the pump to neutral in the event of control pressure loss. The new integral gerotor type charge pump combines excellent suction/speed capabilities in a compact design. The pump mounted electronics and sensors have been specially designed to meet the rigors of the mobile - off road enviroment, including resistance to electromagnetic interference or emissions. The serviceable bi-metal bearing plate has steel for high pressure capability and a bronze bearing face for high speed capabilities. SAE auxiliary mounts: A, B, B-B and C are available with and without charge pump. Excellent torque capability allows high horsepower to work circuits without multiple pump drives. The main system ports SAE code 61 and code 62 are available with SAE or Metric threads. Opposite side and same side configurations are now available to accommodate a wide range of installations. Peak Pressure: Series 1: 6000 PSI. Series 2: 6250 PSI. (Peak Pressure should not exceed 1% of operating time). Maximum Shaft Speed: See table below. Main Pump and Charge Pump have different maximum speed ratings. Use the lower rating for the combination. Recommended Fluid Viscosity: 80-180 SSU is optimum. 60 SSU is low intermittent limit. 10,000 SSU is high intermittent limit (cold start-up). System Temperature: 180F Normal Continuous Limit, 220F Maximum Intermittent Limit. Recommended Filtration: ISO 4406 Cleanliness Level 18/13 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. (The typical installation has the excess charge pump flow from the motor's charge pressure relief valve flushing the case on the pump. The motor's upper case drain line connects to the lower case port on the pump. The upper case port on the pump returns back to tank, often through a heat exchanger). The pump and motor cases must remain full at all times. Dimensions: page 516 Eaton Heavy Duty Motors: page 156
154
Eaton Heavy Duty Hydrostatic Transmission Pumps Series 1 Models 33-76 Series 2 Models 54-105
Eaton Heavy Duty Hydrostatic Pumps Series 1 & Series 2
Displ (in/rev) & Speed Mtg Rating Flange Shaft Chg Pump Displ (in/rev) & Speed Rating Chg Press Relief (psi)
Catalog Part No.
Eaton Part No.
Rot
Ports
Control
Other Features
Wt.
Price Each
0003922-106 C1JD82 (Series 2)
14T 3.89 SAE C 4165rpm 4-Bolt SAE C Splined
1 Inch Code CW 61 with Gauge Ports
Manual
0.85 4300rpm
305
5500 PSI Reliefs, 5000 PSI Pressure Overrides, Externally Adjustable Servo Piston Stops, 0.028 Control Orifices, 138.00 2-Bolt SAE-A Auxiliary Mounting Pad with 9T SAE-A Spline and no shaft seal 5500 PSI Reliefs, 5000 PSI Pressure Overrides, Externally Adjustable Servo Piston Stops, 0.028 Control Orifices, 138.00 4-Bolt SAE-C Auxiliary Mounting Pad with 14T SAE-C Spline and no shaft seal
C1JD90 0003922-109
14T SAE C SAE 3.90 C 4165rpm 4-Bolt Splined
1 Inch Code CW 61 with Gauge Ports
Manual
0.85 4300rpm
305
C1JE59 4623-524
14T 4.59 SAE C SAE C 4160rpm 4-Bolt Splined
CW
1 Inch Code 61
Manual
1.28 3800rpm
Fluid Conveying
SAE B 2-Bolt 13T SAE B Splined Auxiliary Pad with Shaft Seal (Dry), 280 0.073 Control Orifice, Charge Pump with Remote Pressure Filter Ports SAE B 2-Bolt 13T SAE B Splined Auxiliary Pad with Shaft Seal (Dry), 280 0.073 Control Orifice, Charge Pump with Remote Pressure Filter Ports
70.00
C1JE45 4623-477
14T 1 Inch 4.60 SAE C SAE C CCW Code 4160rpm 4-Bolt Splined 61
Manual
1.28 3800rpm
65.00
0006422-272 C1JM28 (Series 2)
13T 6.43 SAE C 3720rpm 4-Bolt SAE D Splined
1 Inch with Code Manual Neutral 1.06 CW 62 with Lockout 3700rpm Gauge Switch Ports
305
Propel Valve Plate, 4500 PSI Reliefs, 4000 PSI Pressure Overrides, 0.044 Control Orifices, 4-Bolt SAE C Auxilliary 150.00 Mounting Pad with 14T SAE-C Spline and no shaft seal
Remanufactured Units: Remanufactured Units are genuine Eaton Factory Remanufactured Units that carry the same warranty as new units, and require a trade-in of your old unit. (A Core Charge is added to your invoice, and is credited when your trade-in is received).
Parts for Eaton Heavy Duty Hydrostatic Pumps

Catalog Part No. C1JS14 Part Number 0008826-000 Description Gasket, Mounting Flange, Series 1 Models 54-64 Wt. 0.01 Price Each
155
Eaton Heavy Duty Hydrostatic Transmission Motors Displacements From 3.32 to 7.62 in/rev
Eaton Heavy Duty Hydrostatic Motors Models 33 through 76

Features: 6000 PSI Pressure Rating. 10,000 Hour B10 Bearing Design Life. Advanced cylinder barrel design permits high speed and pressure. Pistons have long engagement with cylinder bore resulting in low leakage. High strength cast iron housings provide greater noise damping and wall strength. Bi-metal bearing plate has steel for high speed and pressure and bronze for greater bearing properties. A wide variety of configurations and options are available (Contact us for additional information). Peak Pressure: 6000 PSI (Peak Pressure should not exceed 1% of operating time). Maximum Shaft Speed: See table below. Recommended Fluid Viscosity: 80-180 SSU is optimum. 60 SSU is low intermittent limit. 10,000 SSU is high intermittent limit (cold start-up). System Temperature: 180F Normal Continuous Limit, 220F Maximum Intermittent Limit. Recommended Filtration: ISO 4406 Cleanliness Level 18/13 or cleaner. CAUTION: Before the motor is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. (The typical installation has the excess charge pump flow from the motor's charge pressure relief valve flushing the case on the pump. The motor's upper case drain line connects to the lower case port on the pump. The upper case port on the pump returns back to tank, often through a heat exchanger). The case of the pump and motor must remain full at all times. Dimensions: page 516 Eaton Heavy Duty Pumps: page 154 Eaton Heavy Duty Hydrostatic Motors Models 33 through 76
Displ (in/rev) & Catalog Mtg Speed Part No. Eaton Part No. Flange Rating C1JM20 3333-059 C1HW96 0003931-090 C1EL18 0003933-003 C1HJ42 4633-091 C1JM47 5433-174 C1JM38 0006433-034 C1JE78 6431-090 3.32 4510RPM 3.89 4160 RPM 3.89 4160RPM 4.60 4160RPM 5.44 3720RPM 6.43 3720rpm 6.43 3720rpm SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt High Pressure Reliefs (psi) None 4000 5000 None None None 5500 Charge Pressure Relief (psi) 240 220 160 240 280 160 220 Price Each
Shaft
Ports
Other Features
Wt. 83.00 83.00 83.00 83.00 106.00 65.00
14T SAE C 1 Inch Splined Code 62 14T SAE C 1 Inch Splined Code 61 14T SAE C 1 Inch Splined Code 61 14T SAE C 1 Inch Splined Code 62 14T SAE C 1 Inch Splined Code 61 14T SAE C 1 Inch Splined Code 62 14T SAE C 1 Inch Splined Code 62
30.00
Remanufactured Units: Remanufactured Units are genuine Eaton Factory Remanufactured Units that carry the same warranty as new units, and require a trade-in of your old unit. (A Core Charge is added to your invoice, and is credited when your trade-in is received).
156
Hydraulic Cylinders
Tie Rod
1-1/2" Bore Midway DA Series

Features: Ductile iron rod clevis, base clevis and cylinder head. Aluminum alloy piston with o-ring seal and backup rings. Self locking piston nut. Metal clad rod wiper. Ground & polished chrome plated rod. Precision honed cylinder tube. High tensile steel tie rods. Zinc plated clevis pins and clips. Maximum Operating Pressure: 2500 PSI. Dimensions: page 519 1-1/2" Bore Midway DA Series
Catalog Part No. C1EG69 Midway Model 1504TR Stroke Bore (in) (in) 1.50 1.50 1.50 1.50 4 6 8 12 Rod Dia (in) 0.75 0.75 0.75 0.75 Ports 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT Pin to Pin Retracted (in) 13.25 15.25 17.25 21.25 Pin to Pin Extended (in) 17.25 21.25 25.25 33.25 Pin Dia (in) 0.625 0.625 0.625 0.625 Wt. 9.75 10.70 11.90 13.85 Price Each
C1AK80 1506TR C1AK81 1508TR C1AK90 1512TR
2" to 5" Bore Monarch TL & TX Series

TL Series Features: Ductile iron rod clevis, base clevis and cylinder head. Ductile iron piston with o-ring seal and backup rings. Self locking piston nut. Metal clad rod wiper. Hard chrome plated shaft. Precision finished skive & burnished heavy steel wall tube. High tensile steel tie rods. Zinc plated high tensile steel pins & retainers. Double ported. TX Series Features: Lighter weight / Lesser cost Ductile iron castings Double ported base caps 2500 PSI working pressure, 5000 PSI proof pressure Offered in red & black (standard stock models are red) Offered in inline and 90 to pin port orientations (standard stock models are ports inline with pins). Maximum Operating Pressure: 2500 PSI. Note: ASAE cylinders (2 to 4 bore) have threaded shaft to accept optional mechanical stroke control. Note: TL Series cylinders are double ported both ends, and are assembled with ports inline with pins. TX Series cylinders rod end port (just one port) is inline with pin unless noted otherwise, blind end is double ported and is assembled inline with pin (unless noted otherwise). Application Considerations: Long stroke cylinders have lower full extension ratings to prevent excessive column loading (buckling of shaft). See tables. Dimensions: page 519 2" to 5" Bore Monarch TL & TX Series
Rod Dia (in) 1.125 1.125 1.125 1.125 1.125 1.125 1.125 Pin to Pin Pin to Pin Retracted Extended (in) (in) 16.25 18.25 20.25 20.25 22.25 24.25 26.25 22.25 26.25 28.25 30.25 34.25 38.25 42.25 Pin Dia (in) 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Full Extension Full Extension Rated Pressure Rated Load (psi) (lbs) 2500 2500 2500 2500 2500 2500 2500 7854 7854 12272 7854 7854 7854 12272
Catalog Part No. C1JX54
Monarch Model 2006TX
Bore Stroke (in) (in) 2 2 2 2 2 2 2 6 8 8 10 12 14 16
Ports 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT
Wt. 11.34 12.70 12.96 14.00 15.00 16.05 17.00
Price Each
C1KB88 2008TX C1KA40 2008TX-ASAE C1KJ47 C1JX55 C1JX56 2010TX 2012TX 2016TX
C1KA45 2014TX
157
Hydraulic Cylinders
Tie Rod
2" to 5" Bore Monarch TL & TX Series
Rod Dia (in) 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.125 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.25 1.25 1.25 1.25 1.25 1.50 1.25 1.25 1.25 1.50 1.50 Pin to Pin Pin to Pin Retracted Extended (in) (in) 28.25 30.25 34.25 18.25 20.25 20.25 22.25 24.25 26.25 28.25 34.25 16.25 18.25 20.25 20.25 22.25 24.25 26.25 28.25 30.25 34.25 20.25 18.25 20.25 24.25 26.25 28.25 18.25 20.25 22.25 28.25 34.25 46.25 50.25 58.25 26.25 28.25 30.25 34.25 38.25 42.25 46.25 58.25 22.25 26.25 28.25 30.25 34.25 38.25 42.25 46.25 50.25 58.25 28.25 26.25 30.25 38.24 42.25 46.25 26.25 30.25 34.25 46.25 58.25 Pin Dia (in) 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 Full Extension Full Rated Extension Pressure Rated Load (psi) (lbs) 2500 2500 2180 2500 2500 2500 2500 2500 2500 2500 2125 2500 2500 2500 2500 2500 2500 2500 2340 1985 2500 2500 2500 2500 2500 2060 2500 2500 2500 2400 2500 1720 7854 7854 6850 12272 12272 12272 12272 12272 12272 12272 10435 17672 17672 17672 17672 17672 17672 17672 16560 14025 17672 24053 24053 24053 24053 19840 24053 31416 31416 30195 31416 21645
Catalog Part No. C1KJ49 C1KJ50 C1KJ53 C1JR55
Monarch Model 2018TX 2020TX 2024TX 2508TX-ASAE 2510TX 2512TX 2514TX 2516TX 2518TX 2524TX 3006TX 3008TX-ASAE 3010TX 3012TX 3014TX 3016TX 3018TX 3020TX 3024TX 3508TX-ASAE 3508TX
Bore Stroke (in) (in) 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 3 3.5 3.5 3.5 3.5 3.5 3.5 4 4 4 4 4 18 20 24 8 8 10 12 14 16 18 24 6 8 8 10 12 14 16 18 20 24 8 8 10 14 16 18 8 10 12 18 24
Ports 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT
Wt. 19.00 21.00 23.00 14.25 14.66 15.40 23.39 18.57 19.55 24.00 28.00 16.20 17.95 18.30 21.00 23.00 22.80 25.00 28.00 30.00 37.00 25.00 24.00 26.00 30.00 32.00 37.00 29.00 31.00 34.00 44.00 52.00
Price Each
C1KF98 2508TX
C1JX94 C1JR57 C1JR58 C1JR59 C1KJ63 C1KJ64 C1JY56 C1JY57 C1KJ85 C1KJ86 C1JY66
C1KG12 3008TX
Fluid Conveying
C1JY67 C1KJ87 C1KJ90 C1KJ91 C1KJ99 C1KJ98
C1KK11 3510TX C1KK12 3514TX
C1KK13 3516TX C1KK14 3518TX C1KK21 4008TX C1KK22 4010TX C1KK23 4012TX C1KK24 4018TX C1KK28 4024TX
Monarch TL & TX Series Cylinders Replacement Parts Indexes & Technical Information
Catalog Part No. Part Number Clevis Clips (1 Bag of 12 clips) Description Wt. 0.14 1.00 1.84 2.91 0.06 0.08 0.20 0.09 0.08 0.09 Price Each
C1ZX17 640110
640091-MONARC C1BX27 H Clevis Pin & Clip Kit, contains (2) Clevis Pins and (4) Clips C1FN18 492650 C1GH54 492652 C1DK12 RK20L-112 C1DK13 RK25L-112 C1DK14 RK25L-125 C1DK15 RK30L-125 C1DK16 RK30L-150 C1DK17 RK35L-125 Rod Clevis for 2 & 2-1/2 Inch Bore TL Series Cylinders, 1 Inch Pin Size Rod Clevis for 3, 3-1/2 & 4 Inch Bore TL Series Cylinders, 1 Inch Pin Size TL Series Seal Kit, 2 Inch Bore, 1-1/8 Inch Rod TL Series Seal Kit, 2-1/2 Inch Bore, 1-1/8 Inch Rod TL Series Seal Kit, 2-1/2 Inch Bore, 1-1/4 Inch Rod TL Series Seal Kit, 3 Inch Bore, 1-1/4 Inch Rod TL Series Seal Kit, 3 Inch Bore, 1-1/2 Inch Rod TL Series Seal Kit, 3-1/2 Inch Bore, 1-1/4 Inch Rod
158
Hydraulic Cylinders
Tie Rod
Monarch TL & TX Series Cylinders Replacement Parts
Catalog Part No. Part Number Description TL Series Seal Kit, 3-1/2 Inch Bore, 1-1/2 Inch Rod TL Series Seal Kit, 4 Inch Bore, 1-1/4 Inch Rod TL Series Seal Kit, 4 Inch Bore, 1-1/2 Inch Rod Steel Stop Bushing, 2-1/4" OD, 1" wide, for 1-1/4 Rod Wt. 0.09 0.10 0.01 0.76 Price Each
C1DK18 RK35L-150 C1DK19 RK40L-125 C1DK20 RK40L-150 C1DK69 SB125-100
159
Hydraulic Cylinders
Custom
Georgia Hydraulic Cylinders

Georgia Hydraulic Cylinders has a reputation for building quality cylinders, quickly, at a reasonable cost. New applications, as well as replacing existing industrial or mobile cylinders, are welcome. Please contact us for application assistance.
2500 Series Welded - Medium Duty: Suitable for medium pressure hydraulic service Cast iron head and piston are made from fine grained centrifugally cast bar Piston rod is ground, polished and plated medium carbon steel Teflon piston seals are available O-ring boss ports are available Optional high temperature seals. Dimensions: page 520
Fluid Conveying
3000 Series Welded - Heavy Duty: Suitable for high pressure applications Cast iron piston rings or Teflon piston rings are available Internal cushioning is available O-ring boss ports are available Optional high temperature seals. Dimensions: page 521
LA-LH-HH Series - Tie Rod: LA Series (Air) LH Series (Low Pressure Hydraulic) HH Series (High Pressure Hydraulic) Custom Cylinders: Manufactured to your specifications Bore sizes to 20 inches Lengths to 20 feet.
160
Hydraulic Cylinders
Custom
HDM Hydraulics, LLC Cylinders

HDM Hydraulics, LLC designs and manufactures single acting, double acting, and telescopic hydraulic cylinders for mobile equipment applications. Please contact us for application assistance. Ram: HDM manufactures 1" to 3" solid rod rams and 3" to 5" hollow rod ram cylinders. HDM has various ram designs including an adjustable v-packing design, a polypak rod seal design and a heavy duty design to accommodate sideloading. Double Acting: HDM custom designs and manufactures 1" to 6" bore double acting cylinders to meet the application's requirements. Standard double acting cylinders accommodate operating pressures up to 3,000 PSI. Telescopic: HDM is considered the industry leader in small bore, single acting and double acting telescopic cylinders. They custom design their telescopic cylinders to meet the application's requirements. Piggyback: HDM's piggyback cylinders are designed to accommodate applications that require additional stroke and require consistent extension and retraction speed. Rephase: HDM's rephase cylinders are designed to synchronize the extension and retraction of two or more cylinders. These cylinders are custom designed to meet the specific requirements of the application. Aluminum: HDM is the leading global manufacturer of aluminum hydraulic cylinders. These cylinders are very durable, lightweight and used in highly corrosive environments. The aluminum cylinders are rated to accommodate operating pressures up to 3,000 PSI. Double Rod End: HDM manufactures double rod end cylinders for a variety of applications that require push and/or pull force from both ends of the cylinder. Integrated Valving: Many of HDM's cylinder designs have integrated valving including counterbalance valves, pilot-operated check valves, sequencing valves and thermal relief valves as required to meet the performance requirements of the application. Linear Feedback: Linear feedback devices can be internally or externally mounted to provide precise cylinder position. These cylinders are used for accurate positioning and velocity control. Heavy Duty: HDM's heavy duty cylinders are designed to meet the requirements of rugged applications including sideloading, operating pressures up to 5,000 PSI, pressure spikes up to 10,000 PSI, and high shock and vibration levels. Locking: HDM designs and manufactures locking cylinders for applications that require a mechanical locking system. Their mechanical locking features are integrated into the design of the cylinder. Screw Actuator : HDM also manufactures hydraulically driven screw actuators that are custom designed for applications required to move up to 10,000 lbs. or more at speeds of 100 in./min. The acme screw has mechanical self locking capability in any position.
161
Steering Units & Accessories

Char-Lynn Power Steering
Char-Lynn Series 3-6-12 Steering Control Units Open Center, Non-Load Reaction
Traditional power steering units for applications that don't require integral valve capabilities. Max. System Pressure: 2500 PSI. Max. Back Pressure: 300 PSI. Operating Temperatures: Maximum System Operating Temperature is 200 F. Maximum differential between steering unit and system temperature is 50 F. Input Torque: 25-35 lb-in @ 100 PSI back pressure for powered applications. 100 lb-ft maximum for non-powered applications. Fluids: Most petroleum based fluids and ATF Type A. Recommended Filtration: ISO 18/13 Cleanliness Level. Dimensions: page 522 Char-Lynn Series 3-6-12 Steering Control Units Open Center, Non-Load Reaction
Catalog Part No. Char-Lynn Model Displacement Rated Flow (cu.in./rev) (GPM) 4.5 4.5 5.9 6.2 7.3 9.7 11.3 14.1 17.9 23.8 29.7 35.9 45.1 2-4 4-8 4-8 2-4 4-8 4-8 4-8 4-8 4-8 8-16 8-16 8-16 8-16 Ports 9/16-18 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 9/16-18 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring 3/4-16 St.Thd O-Ring Special Features Wt. 11.68 11.01 11.31 11.48 11.44 12.00 12.17 12.55 13.33 14.50 15.05 16.33 18.30 Price Each
C1BC11 211-1001 C1BC12 211-1007 C1BC13 211-1008 C1JX62 211-1002 C1BC14 211-1009 C1BC15 211-1010 C1BC16 211-1011 C1BC17 211-1012 C1BC18 C1BC21 C1BC19 C1KJ56 211-1158 211-1177 211-1160 211-1179
Fluid Conveying
C1BC22 211-1178
Parts For Char-Lynn Series 3-6-12 Steering Control Units

Catalog Part No. Part Number Seal Kit, Buna-N, -001-002 Series. Seal Kit, Buna-N, with Low Input Torque Seal (replaces Quad-Ring), -001-002 Series Description Seal Kit, Buna-N, -001 Series. Quad Ring Shaft Seal. Wt. 0.04 0.04 0.03 Price Each
C1AB58 0064418-000 C1AB61 0064466-000 C1AB62 0064470-000
162

Steering Columns for Char-Lynn Series 3-6-12

Features: Column & mounting flange is a sturdy single weldment. The method of retaining bearing & shaft provides high thrust load and side load capacity. Dust seal protects against dirt and moisture. Available with serrated or keyed shaft. One or two horn wires are available with the serrated shaft. Dimensions: page 522
Steering Columns for Char-Lynn Series 3-6-12

Catalog Part No. Char-Lynn Model Length (in) 2.5 2.5 6.0 8.0 30.0 30.0 Shaft Type Keyed Serrated Serrated Serrated Serrated Serrated Horn Wire No No No No No 1 Wire Wt. 1.72 1.86 2.20 2.40 5.17 5.17 Price Each
C1AY21 204-1001 C1AY22 204-1002 C1AY23 204-1004 C1JF42 C1HH76 204-1036 204-1008 C1AY24 204-1006
Fluid Conveying
Note: As of February 28, 2008, mounting bolts are being be furnished with the columns (4ea 3/8-16 x 3/4 12-point cap screws).
Accessories For Char-Lynn Steering Columns

Catalog Part No. Part Number Description Bolt Kit containing (4) 3/8-16 x 3/4 12-point cap screws (to bolt the column to the steering unit) Wt. 0.14 Price Each
C1GM77 9900158-000
Steering Wheels & Accessories for Char-Lynn Series 3-6-12
Steering Wheels & Accessories for Char-Lynn Series 3-6-12

Catalog Part No. C1JD36 Char-Lynn Model 209-1014 Description Steering Wheel, Standard, 17 inch diameter, black. Fits 13/16-20 Serrated Columns. Steering Wheel, thin 3-spoke design, 15 inch diameter. Fits 13/16-20 Serrated Columns. Hex Nut for attaching Steering Wheel to Serrated Column. 13/16-20 UNF. Steering Wheel Cap (For installations without horn) Horn Button Kit Wt. 4.45 4.31 0.09 0.11 0.37 Price Each
C1BB32 209-1007 C1AA78 0021084-000 C1BB31 209-1005 C1BA26 208-1013
163

Other Char-Lynn Steering Products

Other Char-Lynn Steering Products
Catalog Part No. Char-Lynn Model Description Seal Kit for 217 Series (Gerotor) Torque Generator Series 10 Steering Control Unit, 12 GPM, 3000 PSI, 28.2 in/rev, Open Center, Non-Load Reaction, 145 PSI Max Back Pressure, Manual Steering Check, SAE-8 Ports, 2 x M12 Mounting Threads Port Face, 4 x M10 Mounting Threads Mounting Face, Wt. 0.03 17.77 Price Each C1GM65 0064500-000 C1JX53 200-0039
C1JC53
VLE In-Line Priority Flow Control, 40 GPM Inlet, Standard Metering, Dynamic Load Sense Pilot 606-1345-003-QA with Standard 1.23 Boost, 100 lbf/in Control Spring, 2500 PSI Relief, Ports CF (SAE-10) P & 12.11 EF (SAE-12) LS & T (SAE-4) 233-4005-003 Series 20 Steering Control Unit, 7 GPM, 3000 PSI, 45.1 in/rev, Load-Sensing, Dynamic Signal, Non-Load Reaction, Anti-Cav Check, SAE-8 Main Ports, SAE-4 LS Port, Low Input Torque, Wide Angle Deflection 21.67
C1JC39
164
Hydraulic Valves & Accessories

Category Page 168 173 188 198 202 202 202 203 204 204 205 206 207 209 210 211 212 212 214 215 215 220 221 225 230 232 235 238 238 261 266 268 272 273 275 276 277 278 279 289 290 293 294 298 300 300 301 302 302 303 305 307 Hydraulic Power & Control Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Check Valves, Pilot-Operated Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Counterbalance Valves (Overcenter Valves). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cushion Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manually-Operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers MPV1-10 Series 2-Way 2-Position Cartridge Valves (To 12 GPM & 3000 PSI) . . . . . . . . . . . . . . Vickers DG17V-3 Series Subplate Mounted (NFPA Size D03, ISO 4401 Size 03) . . . . . . . . . . . . . . . . . . Monoblock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton 30900 Series 1-3 Spool (To 5 GPM & 3000 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD4 Series (To 12 GPM Nominal, To 3600 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD5 Series (To 12 GPM Nominal, To 4600 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD11 Series (To 18 GPM Nominal, To 4600 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brand Hydraulics AO755 Series 1 Spool (To 18 GPM & 3000 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brand Hydraulics LS755 Series 1-Spool (To 18 GPM & 3000 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brand Hydraulics SDCF Series 1-Spool (To 18 GPM & 3000 PSI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Proportional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers KDG4V-3 & -3S Series, without Feedback (NFPA Size D03, ISO 4401 Size 03) . . . . . . . . . . . . . Vickers KFDG4V-3 Series, with Feedback (NFPA Size D03, ISO 4401 Size 03) . . . . . . . . . . . . . . . . . . . Sectional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD6 Series (12 GPM Nominal, To 4600 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Husco Model 5000 (20 GPM Nominal Flow Rating, To 3000 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD8 Series (21 GPM Nominal Flow Rating, To 4600 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SDS150 Series (24 GPM Nominal Flow Rating, To 4600 PSI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . Husco Model 6000 (40 GPM Nominal Flow Rating, To 3400 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD16 Series (37 GPM Nominal Flow Rating, To 4600 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD25 Series (63 GPM Nominal Flow Rating, To 4600 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solenoid-Operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screw-In Cartridge Valves (2-way, 3-way, 4-way). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4V-3 & -3S Series Subplate Mounted (NFPA Size D03, ISO 4401 Size 03) . . . . . . . . . . . . . . Vickers DG4V-3 Series Soft Shift Subplate Mounted (NFPA Size D03, ISO 4401 Size 03) . . . . . . . . . . . Vickers DG4S4-01 60 Series Subplate Mounted (NFPA Size D05, ISO 4401 Size 05) . . . . . . . . . . . . . . . Vickers DG4V4-01 10 Series High Pressure Subplate Mounted (NFPA Size D05, ISO 4401 Size 05) . . . Vickers DG4V5 20 Series High Pressure Subplate Mounted (NFPA Size D05, ISO 4401 Size 05) . . . . . Vickers DG4S4-01 60 Series Soft Shift Subplate Mounted (NFPA Size D05, ISO 4401 Size 05) . . . . . . . Vickers DG4S4-0150 Series (Air Gap) Subplate Mounted (NFPA Size D05, ISO 4401 Size 05) . . . . . . . Vickers DG5V-8 Series Subplate Mounted (NFPA Size D08, ISO 4401 Size 08) . . . . . . . . . . . . . . . . . . . Vickers DG5V-10 Series Subplate Mounted (NFPA Size D10, ISO 4401 Size 10) . . . . . . . . . . . . . . . . . . Flow Control Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Logic Element Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flow Divider Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gate Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Needle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plug Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pressure Reducing Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct-Acting (To 4 GPM & 2400 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pilot-Operated (To 10 GPM & 3500 PSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct-Acting Ball Type Fast acting Intermittent duty Low cost Possibly noisy Higher overpressure . Direct-Acting Poppet Type Fast acting Continuous duty Low cost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct-Acting Differential Poppet Type Fast acting Intermittent duty Contaminant tolerant . . . . . . . . . . . Pilot-Operated Poppet Type Anti-Cavitation Make-Up Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
165

Hydraulic Power & Control Category Page 308 312 313 314 318 319 319 323 325 325 327 328 328 329 332 333 336 340 523 523 523 526 526 526 527 528 529 530 531 532 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 553 554 554 559 Pilot-Operated Spool Type Quiet, smooth & consistent Continuous duty Low overpressure . . . . . . . . . Guided Piston Type Quiet Stable Flow Modulating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sandwich Valves (Aluminum Housings, Blanking-Linking-Spacer Plates) . . . . . . . . . . . . . . . . . . . . . . . . . Selector Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slip-In Cartridge Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stack Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NFPA Size D03 - ISO 4401 Size 03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NFPA Size D05 - ISO 4401 Size 05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Accessory Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shuttle Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Truck Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Valve Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bolt & Bolt Extender Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cartridge Valve Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cartridge Valve Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solenoid Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Subplates, Manifolds, Cover Plates, Valve Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic Control Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Valve Technical Information, Performance, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Apollo Pressure-Temperature Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional Control Valves, Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brand AO755 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brand LS755 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brand SDCF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brand TS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton 30900 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Husco Model 5000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Husco Model 6000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4V-3 & DG4V-3S Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4V-3 & DG4V-3S Series Soft Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4S-01 Series, -60 Design (Wet Armature) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4S-01 Series Soft Shift, -60 Design, Wet Armature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4S-01 Series, -50 Design (Air Gap) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4V4-01 Series, -10 Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG4V-5 Series, -20 Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG5S-8 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG5V-8 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers DG5V-10 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil DPC130 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD5 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD8 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD11 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD16 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SD25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Walvoil SDS150 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Relief Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fulflo V Series Guided Piston Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stack Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers NFPA-D03 SystemStak Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers NFPA-D05 SystemStak Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Conveying
166

Category Page Hydraulic Power & Control Vickers NFPA-D08 Stack Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 562
167

Ball Valves
Bronze Apollo 70-100 Series
Features: Chromium plated ball. RPTFE seats and stuffing box ring. Blow-out proof stem design. Adjustable packing gland. Standard Materials: Zinc plated steel lever (with vinyl cover) and lever nut. RPTFE seats, stem packing and stem bearing. B16 chrome plated ball. B16 retainer (1/4 through 1 inch). B584-C84400 retainer (1-1/4 through 3 inch). B16 gland nut and stem. PTFE body seal (1-1/4 through 3 inch). B584-C84400 body. Pressure Ratings: 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum service to 29 in./Hg. Note: Valves have a reduced pressure rating at elevated temperatures. See "600# Bronze P-T Rating (Graph 4) on page 523 Note: Numerous options are available on special order. Contact us for assistance. Seal Kits: page 172 Bronze Apollo 70-100 Series
Catalog Part No. Apollo Model Ports 1/4 NPT 1/2 NPT 3/4 NPT 1 NPT 2 NPT 2-1/2 NPT 3 NPT Ball CV Orifice Dia. Rating 0.37 0.50 0.68 0.87 1.50 2.00 2.50 8.4 15 30 43 108 503 370 Light Lever Special Features Seal Kit 70-002-01 70-003-01 70-004-01 70-005-01 70-008-01 70-009-01 70-009-01 Wt. 0.58 0.63 1.39 1.72 6.06 17.25 17.25 Price Each
C1EN78 70-101-01 C1EN82 70-103-01 C1EN84 70-104-01 C1EN86 70-105-01 C1EN94 C1EN95 70-108-C5 70-109-01
Fluid Conveying
C1EN77 70-100-01
Brass Stuaff 2BVL Series
Features: Brass Hot Stamping with Chrome Plated Brass Ball. Blow Out Proof Stem. Teflon Seats, Seals & Thrust Washer. Metal Handle. Maximum Operating Pressure: Up to 600 PSI Temperature Range: Brass Stuaff 2BVL Series
Catalog Part No. C1KJ71 C1KJ72 Maximum Working Pressure (psi) 362 362 Price Each
Stauff Model 2BVL2024F 2BVL2032F
Ports 1-1/2 NPT 2 NPT
Special Features
Wt. 2.20 4.50
168

Ball Valves
Bronze (3-Way) Apollo 70-600 Series
Features: Chromium plated ball. RPTFE seats and stuffing box ring. Blow-out proof stem design. Adjustable packing gland. Standard Materials: Zinc plated steel lever (with vinyl cover) and lever nut. RPTFE seats, stem packing and stem bearing. B16 chrome plated ball. B16 retainer (1/2 to 1 inch). B584-C84400 retainer (1-1/4 to 2 inch). B16 gland nut and stem. PTFE body seal (1-1/2 to 2 inch). B584-C84400 body. Pressure Ratings: 400 psig WOG, Cold Non Shock. Note: Valves have a reduced pressure rating at elevated temperatures. See "600# Bronze P-T Rating (Graph 4) on page 523 Note: Numerous options are available on special order. Contact us for assistance. Seal Kits: page 172 Bronze (3-Way) Apollo 70-600 Series
Catalog Part No. Apollo Model Ports 3/8 NPT 1/2 NPT 3/4 NPT Ball Orifice CV Dia. Rating 0.37 0.50 0.68 8.4 5.4 12 SS Lever & Nut SS Lever & Nut Special Features Seal Kit 70-002-01 70-003-01 70-004-01 Wt. 0.89 0.76 1.65 Price Each
C1EW29 70-602-01
Fluid Conveying
C1EN96 70-603-10 C1EN97 70-604-10
Steel - Barstock Body Apollo 73-100 Series
Features: Barstock design. RPTFE seats and stuffing box ring. Fire safe design when ordered with graphite packing. Adjustable packing gland. Blow-out proof stem design. Nitride corrosion protection. Standard Materials: Zinc plated steel lever (with vinyl cover) and lever nut. RPTFE seats, stem packing and stem bearing. A 108-CS chrome plated ball. A 108-CS retainer. A 108-CS gland nut and stem. PTFE body seal (1-1/4 through 2 inch). A 108-CS body. Pressure Ratings: 1/4 to 1 inch: 2000 psig WOG, Cold Non-Shock. 1-1/4 to 2 inch: 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum service to 29 in./Hg. Note: Valves have a reduced pressure rating at elevated temperatures. For 1/4 inch to 1 inch sizes, see "2000# CS P-T Rating (Graph 13) on page 524 . For 1-1/4 inch to 2 inch sizes, see "1500# CS P-T Rating (Graph 11) on page 524 Note: Numerous options are available on special order. Contact us for assistance. Seal Kits: page 172 Steel - Barstock Body Apollo 73-100 Series
Catalog Part No. C1KU53 Apollo Model 2BVM2006S 3/4 NPT 0.68 30 70-004-01 Ports Ball CV Orifice Rating Dia. Special Features Seal Kit Wt. 0.53 1.58 Price Each
C1EP14 73-104-01
169

Ball Valves
Steel - Barstock Body Stauff BBVM Series

Features: Fully ported. Carbon steel body. Chrome plated brass ball. 50,000 cycle seal life. Delrin seats. Viton O-Rings. Maximum Operating Pressure: Sizes 1/4 - 1/2: 7250 PSI. Sizes 3/4 - 1: 5000 PSI. Sizes 1-1/4 - 1-1/2: 3600 PSI. Temperature Range: -14F to 212F. Steel - Barstock Body Stauff BBVM Series
Catalog Part No. C1ZT41 Maximum Working Pressure (psi) 5000 7250 7250 7250 6000 5000 7250 7250 7250 7250 5000 5000 5000 Locking Device Locking Device Locking Device Price Each
Stauff Model BBVM21120201M
Ports 3/4 SAE 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT SAE-04 SAE-06 SAE-08 SAE-08 SAE-12 SAE-12 SAE-16
Special Features 0.79
Wt. 3.50 0.66 1.10 1.65 3.60 5.06 0.66 1.10 1.65 1.53 3.65 3.59 5.21
C1FD90 BBVM20040201 C1FD91 BBVM20060201 C1FD92 BBVM20080201 C1KL30 BBVM20120200K C1FD94 BBVM20160201 C1FD97 BBVM21040201 C1FD98 BBVM21060201 C1FD99 BBVM21080201 C1JS23 C1FE11 C1JS24 C1JS25 BBVM21080200M/LD BBVM21120201 BBVM21120200M/LD BBVM21160200M/LD
Steel - Forged Body Stuaff FBV Series

Features: Forged Body, High Pressure Valves. Steel Handle. Delrin +MoS2 Ball Seats. Viton O-Rings. Zinc Plated Body. Maximum Operating Pressure: 5000 PSI Temperature Range: -20?F to 212?F Steel - Forged Body Stuaff FBV Series
Catalog Part No. C1KL79 C1KL80 Maximum Working Pressure (psi) 5000 5000 Price Each
Stauff Model FBV21200001MLD FBV21240001M/LD
Ports SAE-20 SAE-24
Special Features Locking Device Locking Device
Wt. 8.60 3.25
170

Ball Valves
Stainless Steel Apollo 76-100 Series
Features: Investment cast components. RPTFE seats and stuffing box ring. Mounting pad for easy actuator mounting. Blow-out proof stem design. Adjustable packing gland. Meets NACE MR-01-75. Stainless steel lever & nut. Standard Materials: 304 SS lever (with vinyl cover). 18-8 SS lever nut. RPTFE seats, stem packing and stem bearing. A276-316 ball. A276-316 retainer (1/4 to 1 inch). A351-CF8M retainer (1-1/4 to 3 inch). A276-316 gland nut and stem. PTFE body seal (1-1/4 through 2 inch). A351-CF8M body. Pressure Ratings: 1/4 to 1 inch: 2000 psig WOG, Cold Non-Shock. 1-1/4 to 2 inch: 1500 psig WOG, Cold Non-Shock. 2-1/2 to 3 inch: 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum service to 29 in./Hg. Note: Valves have a reduced pressure rating at elevated temperatures. For 1/4 to 1 inch sizes, see "2000# SS P-T Rating (Graph 14) on page 525 Note: Numerous options are available on special order. Contact us for assistance. Seal Kits: page 172 Stainless Steel Apollo 76-100 Series
Catalog Part No. Apollo Model Ports 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT Ball Orifice CV Dia. Rating 0.37 0.37 0.50 0.68 8.4 7.2 15 30 Special Features Seal Kit 70-002-01 70-002-01 70-003-01 70-004-01 Wt. 0.58 0.54 0.63 1.27 Price Each
Fluid Conveying
C1EP21 76-101-01 C1EP22 76-102-01 C1EP23 76-103-01 C1EP24 76-104-01
Stainless Steel (3-Way) Apollo 76-600 Series
Features: RPTFE seats and stuffing box ring. Meets NACE MR-01-75. Blow-out proof stem design. Adjustable packing gland. Investment cast body. Standard Materials: 304 SS lever (with vinyl cover). 18-8 SS lever nut. RPTFE seats, stem packing and stem bearing. A276-316 ball. A276-316 retainer (1/2 to 1 inch). A351-CF8M retainer (1-1/2 to 2 inch). A276-316 gland nut and stem. PTFE body seal (1-1/2 to 2 inch). A351-CF8M body. Pressure Ratings: 800 psig WOG, Cold Non Shock. Note: Valves have a reduced pressure rating at elevated temperatures. See "800# SS P-T Rating (Graph 21) on page 525 Note: Numerous options are available on special order. Contact us for assistance. Seal Kits: page 172 Stainless Steel (3-Way) Apollo 76-600 Series
Catalog Part No. C1EP27 Apollo Model 76-603-01 Ports 1/2 NPT Ball CV Orifice Rating Dia. 0.50 5.4 Special Features Seal Kit 70-003-01 Wt. 0.75 Price Each
171

Ball Valves
Apollo Ball Valve Seal Kits

Apollo Ball Valve Seal Kits
Catalog Part No. C1EN75 Apollo Model 70-008-01 Description 70-100, 70-800, 73-100 Series (2 in. size). 77-100 Series (1-1/2 in size). 70-600 Series (2 in. size). Wt. 0.12 Price Each
172

Check Valves
Inline Check Valves For Hydraulic (To 12 GPM) & Pneumatic Service
Features: Low pressure differential required to open & close. Application: Free flow is permitted in the direction of the arrow; positive check in the opposite direction. Brass valves for use in pneumatic systems and lower pressure hydraulic systems. Steel valves for use in hydraulic systems. Pressure ratings in tables are for non-shock service. Materials: Body: Available in Brass, Carbon Steel or Stainless Steel. Inline Check Valves For Hydraulic (To 12 GPM) & Pneumatic Service
Maximum Operating Flow Pressure Non-Shock Rating (GPM) (psi) 2000 2000 3.0 8.0 Cracking Pressure (PSI) 1 to 2.5 1 to 2.5
Catalog Part No. Deltrol Model Size C1CM26 C20B 1/4 1/2 C1CM36 C30B
Threads 1/4-18 NPT 1/2-14 NPT
Body Material Brass Brass
CV Factor 0.54 1.47
A (in) .88
C (in)
E (in)
Wt. 0.36 0.89
Price Each
0.36 2.00
Fluid Conveying
1.31 0.47 2.66
Inline Check Valves For Water, Steam, Oil, Chemicals
Features: Fully-formed stainless steel poppet, metal-to-metal seal, ruggedly constructed. Less than 1 psi cracking pressure. No o-rings are used. Application: For a wide variety of applications, including hot water, cold water, steam, oil, gas, compounds and chemicals. Not for air compressor service. Materials: Cast brass 1-piece body, stainless steel poppet. Maximum Working Pressure: 200 lbs. WOG, 75 lbs. steam. Maximum Operating Temperature: 300F. Inline Check Valves For Water, Steam, Oil, Chemicals
Catalog Part No. C1JR70 Strataflo Model 400-050 Size 1/2 Ports 1/2-14 NPT CV Factor 2.60 Dimensions (in) 1.40 Diameter, 2.69 Long Wt. 0.65 Price Each
173

Check Valves
Inline Check Valves For Hydraulic (To 55 GPM) & Pneumatic Service
Features: High flow rating. Low pressure differential required to open & close. Application: Free flow is permitted in the direction of the arrow; positive check in the opposite direction. Brass valves for use in pneumatic systems and lower pressure hydraulic systems. Steel valves for use in hydraulic systems. Pressure ratings in tables are for non-shock service. Materials: Body: Available in Brass, carbon steel or stainless steel (1" size available in naval bronze or ductile iron). Ball and Spring: Stainless steel. Ball Follower: Delrin. Retainer: Stainless steel. Maximum Operating Temperature: 200F. Inline Check Valves For Hydraulic (To 55 GPM) & Pneumatic Service
Maximum Operating Flow Pressure Non-Shock Rating (GPM) (psi) 2000 2000 5000 2000 5000 2000 5000 2000 5000 5000 3.0 6.0 6.0 10.0 10.0 12.0 12.0 20.0 20.0 55.0 Cracking Pressure (PSI) 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 1 to 2.5 3 to 5
Catalog Part No.
Deltrol Model
Size 1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 3/4 1
Threads 1/8-27 NPT 1/4-18 NPT 1/4-18 NPT 3/8-18 NPT 3/8-18 NPT 1/2-14 NPT 1/2-14 NPT 3/4-14 NPT 3/4-14 NPT 1-11-1/2 NPT
Body Material Brass Brass Steel Brass Steel Brass Steel Brass Steel Steel
CV Factor 0.75 1.47 1.47 3.30 3.30 3.60 3.60 5.41 5.41 9.60
E (in) F (in) Wt. 0.63 1.69 0.75 2.00 0.75 2.00 1.00 2.50 1.00 2.50 1.13 2.88 1.13 2.88 1.38 3.25 1.38 3.25 1.75 4.50 0.15 0.22 0.20 0.49 0.45 0.65 0.59 0.98 0.98 2.48
Price Each
Fluid Conveying
C1CN88 EC10B C1CN89 EC20B C1CN90 EC20S C1CN93 EDC25B C1CN94 EDC25S C1CN95 C1CN96 C1CN98 EDC30B EDC30S EDC35S
C1CN97 EDC35B C1CN92 EC40S
174

Check Valves
Inline Check Valves (Male Threads) For Hydraulic (To 15 GPM) & Pneumatic Service
Features: Soft seat for bubble-tight seal (CMMO & CMMQ models). Compact overall length. Low pressure differential required to open & close. Application: Free flow is permitted in the direction of the arrow; positive check in the opposite direction. Brass valves for use in pneumatic systems and lower pressure hydraulic systems. Steel valves for use in hydraulic systems. Pressure ratings in tables are for non-shock service. Materials: Body: Available in Brass, Carbon Steel or Stainless Steel. Ball: Stainless steel. Retainer: Stainless steel. Operating Temperature Range: -30F to 250F (Soft seat CMMO & CMMQ models). Inline Check Valves (Male Threads) For Hydraulic (To 15 GPM) & Pneumatic Service
Maximum Operating Flow Pressure Non-Shock Rating (GPM) (psi) 2000 3000 1000 2.5 2.5 10.0 Cracking Pressure (PSI) 1 to 2.5 1 to 2.5 1 to 2.5
Fluid Conveying
Catalog Part No.
Deltrol Model
Size 1/4 1/4 1/2
Threads 1/4-18 NPT 1/4-18 NPT 1/2-14 NPT
Body Material Brass Steel Brass
CV Factor 0.56 0.56 2.71
A (in)
B (in)
Wt. 0.08 0.08 0.22
Price Each
C1CN38 CMMQ20B C1CN39 CMMQ20S C1CN40 CMMQ30B
1.38 0.63 1.38 0.63 2.06 0.88
Note: CMMO and CMMQ models have soft seat. CMM models have metal-to-metal seat.
175

Check Valves
Inline Check Valves Vickers DS8P1 & DT8P1 Series To 3000 PSI & 50 GPM
Application: Used in hydraulic applications to allow free flow of fluid in one direction only. Construction: Steel body. No elastomer seals. Maximum Operating Pressure: 3000 PSI (Designed for low shock service. Do NOT use this valve to check a high velocity reverse flow resulting in shock conditions). Inline Check Valves Vickers DS8P1 & DT8P1 Series To 3000 PSI & 50 GPM
Catalog Part No. C1AH96 C1JM59 C1AJ60 C1AJ58 Vickers Part No. 114088 117378 125670 125667 Vickers Model DT8P1-02-5-10 DT8P1-03-5-10 DT8P1-06-5-11 DT8P1-10-5-11 Size 1/4 3/8 3/4 1-1/4 Threads 1/4 NPT 3/8 NPT 3/4 NPT 1-1/4 NPT Flow Rating (gpm) 3.2 8.0 20 50 Cracking Pressure (psi) 5 5 5 5 A B Wt. 0.50 0.75 1.50 6.00 Price Each
2.25 0.88 3.00 1.00 3.88 1.50 5.25 2.50
Fluid Conveying
Inline Check Valves Stauff RV Series To 7250 PSI
Specifications: Sizes to 2 inch. Carbon steel body, zinc plated. Working pressure to 7250 PSI (see table for actual rating for a given size). Metal to metal seat. Options: NPT or SAE ports. Two cracking pressures (7 PSI or 65 PSI). Special cracking pressures available on request. Inline Check Valves Stauff RV Series To 7250 PSI
Catalog Part No. Stauff Model Size 1/2 3/4 1 Threads SAE-8 SAE-12 SAE-16 Operating Pressure (PSI) 7250 7250 7250 Cracking Pressure (psi) 7 7 7 D (in) L (in) Wt. 1.38 2.87 1.77 3.46 1.97 5.00 1.54 2.64 4.40 Price Each
C1HX34 RV127S C1HX35 RV167S C1HX36 RV207S
176

Check Valves
Inline Check Valves DMIC CVH Series To 10,000 PSI (At Reduced Safety Factor)
Features: Capable of sustained high pressure operation to 10,000 PSI (Smaller sizes, with reduced safety factor). The precision ground seat and hardened poppet check element eliminate leakage. Superior check valve retainer design prevents spring from fully packing, thereby softening the opening impact and extending service life. Construction: Allow steel body and piston. Black oxide coating on body. Precision hard seat piston seal. High strength spring steel spring. Inline Check Valves DMIC CVH Series To 10,000 PSI (At Reduced Safety Factor)
Catalog Part No. C1EK51 Flow Rating (GPM @ 300 PSI Drop) 158 200 Working Pressure (psi) 6,000 6,000 Minimum Burst Pressure (psi) 19,500 19,500 C (in) D (in) Price Each
DMIC Model CVH05-1250-N
Size 1 1-1/4
Threads 1 NPT 1-1/4 NPT
Wt. 2.13 3.42
C1EK50 CVH05-1000N
4.27 1.81 4.88 2.17
Fluid Conveying
CAUTION: The manufacturer's pressure and flow ratings are extremely liberal and should be interpreted with caution (Low safety factors are used on pressure ratings, and high pressure drops are used on flow ratings).
Cartridge Type Check Valves Vickers CV2-20-P Series To 3000 PSI & 60 GPM
Cartridge Type Check Valves Vickers CV2-20-P Series To 3000 PSI & 60 GPM
Catalog Part No. C1KB69 Vickers Part No. 565844 Vickers Model CV2-20-P-0-5 Description Check Valve Cartridge, Cartridge Only, C-20-2 Cavity Size, 5 PSI Cracking Pressure, Buna-N Seals Wt. 1.06 Price Each
Note: Please contact us for technical & application information on these valves.
177

Check Valves
Right Angle Check Valves Vickers C2-8 Series To 3000 PSI To 100 GPM
Right Angle Check Valves are designed for higher flows with less pressure drop. The valves' seat and poppet are of hardened and ground steel for improved cycle life. Maximum Operating Pressure: 3000 PSI. Right Angle Check Valves Vickers C2-8 Series To 3000 PSI To 100 GPM
Catalog Part No. C1HH55 C1HL46 Vickers Part No. 094029 094043 Vickers Model C2-815 C2-820 Cracking Pressure (PSI) 5 5 Nominal Apprx Flow Pressure Rating Drop at Rated Seals & (GPM) Flow (PSI) Options 16 28 20 14 Buna-N Buna-N Price Each
Ports 3/4 NPT 1 NPT
Dimensions (in) A=3.88 B=1.75 C=2.00 D=2.75 E=1.81 F=3.19 A=4.56 B=1.84 C=2.25 D=3.25 E=2.25 F=3.88
Wt. 5.00 7.44
178

Check Valves
Subplate/Manifold Mount Check Valves Vickers C5G & C5GV Series To 5000 PSI To 100 GPM
Fluid Conveying
Description: Subplate mounted check valve, allows flow in one direction only. Can be used with hydraulic oils, water-in-oil emulsions and water glycols. Pressure & Flow Ratings: See table below. Temperature Range: -4F to 176F. Recommended Filtration Level: ISO 4406 Cleanliness Level 20/18/15 or cleaner. Subplate/Manifold Mount Check Valves Vickers C5G & C5GV Series To 5000 PSI To 100 GPM
Catalog Vickers Part Part No. No. C1JM54 614374 Nominal Flow Pressure Rating Rating (psi) Nominal Size (gpm) 1-1/4 100 5000 Cracking Pressure (psi) 5 Other Features Dual Metric/Inch Hold Down Bolt Facility Dual Metric/Inch Hold Down Bolt Facility Price Each
Vickers Model C5GV-825UG
Seals Buna-N
Wt. 12.80
C1JM55
614382
C5GV-825UG-S8
1-1/4
100
5000
75
Buna-N
12.95
179

Pilot Operated Check Valves
Introduction to Pilot-Operated Check Valves (Lock Valves)

Application: Pilot Operated Check Valves (Lock Valves) are designed to lock a cylinder, without leakage, while a control valve is in a neutral position. Lock Valves function as Check Valves, allowing flow to a cylinder and blocking reverse flow until pilot pressure is applied to unlock the circuit. These valves may be used to prevent movement of a load while the pressure source is inactive. A 4-way control valve is required for all lock valve circuits, including single acting cylinders, in order to apply unlocking pressure to the pilot circuit. A control valve with a free-flow (motor) spool should be used on any circuit which includes a lock valve to prevent pressure build-up between the lock valve and the control valve. Unlocking Pressure (Single Acting Cylinders): Pressure required in the pilot circuit = 25% of the locked pressure. Unlocking Pressure (Double Acting Cylinders): To unlock Blind End of cylinder, pressure required in the pilot circuit = Blind End Locked Pressure/[4.0 - (Rod End Locked Pressure/((Cyl Area - Rod Area)/Cyl Area)]. To unlock Rod End of cylinder, pressure required in the pilot circuit = Rod End Locked Pressure/[4.0 - (Head End Locked Pressure/((Cyl Area - Rod Area)/Cyl Area)]. Caution: When the rod end of a double acting cylinder is locked, if the rod diameter exceeds approximately 75% of the cylinder diameter, unlocking pressure becomes excessive and a lock valve should not be used. Important Lock Valve Basics: Always follow catalog recommendations and application directions Consult with our representative or the factory when in doubt When applying lock valves to life carrying machines such as boom/utility type equipment, do not separate the valve from the actuator... close-couple the valve to the actuator Do not use pilot operated check valves in load holding applications where either overrunning loads are possible, or load release speed is critical Care should be taken to ensure the load is supported by mechanical means when servicing or removing the valve (CAUTION: When servicing the equipment, trapped pressure may be present in the holding valve circuit. Carefully bleed down the trapped pressure before disassembly) The cylinder and it's seals must be in good condition.
180

Cartridge Type Single Pilot Operated Check Valves Vickers SPC2-10 Series To 3000 PSI & 6 GPM
Application & Operation: See Introduction to Pilot-Operated Check Valves (Lock Valves) at the beginning of this section. Ratio of Pilot Piston Area to Check Valve Seat Area: 4:1. Rated Flow: 6 GPM. Maximum Operating Pressure: 3000 PSI. Recommended Fluid Temperature Range: -4F to 150F (180F is extreme condition upper limit). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SPC2-10*, sold separately. Housing: Cavity size C-10-3, sold separately, see page 330 Cartridge Type Single Pilot Operated Check Valves Vickers SPC2-10 Series To 3000 PSI & 6 GPM
Catalog Part No. C1EN54 Vickers Part No. 565619 Vickers Model SPC2-10-P-0-25 Cracking Pressure (psi) 25 Seal Material Buna-N Wt. 0.22 Price Each
Fluid Conveying
Note: Housing not included.
181

Inline Single Pilot Operated Check Valves Vickers SPC1-10 Series To 3000 PSI & 12 GPM
Application & Operation: See Introduction to Pilot-Operated Check Valves (Lock Valves) at the beginning of this section. Ratio of Pilot Piston Area to Check Valve Seat Area: 4:1. Rated Flow: 12 GPM. Maximum Operating Pressure: 3000 PSI. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cracking Pressure: 15 PSI. Inline Single Pilot Operated Check Valves Vickers SPC1-10 Series To 3000 PSI & 12 GPM
Catalog Part No. Vickers Part No. Vickers Model SPC1-10-P-6T SPC1-10-P-8T Valve & Cylinder Port Size SAE-6 SAE-8 Pilot Port Size SAE-4 SAE-4 Pilot Piston Seal No No Seals Buna-N Buna-N Wt. 1.13 1.12 Price Each
C1DU37 02-161199 C1FD38 565875
Note: These valves are sold as a complete assembly.
182

Cylinder Port Single Pilot Operated Check Valves Brand PC-50 Series To 3000 PSI & 16 GPM
Application & Operation: See Introduction to Pilot-Operated Check Valves (Lock Valves) at the beginning of this section. Ratio of Pilot Piston Area to Check Valve Seat Area: 4:1. Construction: Cast iron body. Chrome alloy steel ball. Delrin check seat. Buna-N O-Rings. Nominal Flow Rating: Varies with size. See table below. Maximum Operating Pressure: 3000 PSI. Cylinder Port Single Pilot Operated Check Valves Brand PC-50 Series To 3000 PSI & 16 GPM
Catalog Part No. Brand Model Main Ports 3/8 NPT 1/2 NPT Pilot Port 1/4 NPT 1/4 NPT Nominal Flow Rating (GPM) 8 GPM 16 GPM Wt. 0.82 1.45 Price Each
Fluid Conveying
C1HG65 PC37C C1EF82 PC-50C
183

Inline Single Pilot Operated Check Valves Vickers SPC1-16 Series To 3000 PSI & 40 GPM
Application & Operation: See Introduction to Pilot-Operated Check Valves (Lock Valves) at the beginning of this section. Ratio of Pilot Piston Area to Check Valve Seat Area: 4:1. Rated Flow: 40 GPM. Maximum Operating Pressure: 3000 PSI. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cracking Pressure: 20 PSI. Inline Single Pilot Operated Check Valves Vickers SPC1-16 Series To 3000 PSI & 40 GPM
Catalog Part No. Vickers Part No. Vickers Model SPC1-16-P-12T Valve & Cylinder Port Size SAE-12 Pilot Port Size SAE-6 Pilot Piston Seal No Seals Buna-N Wt. 4.17 Price Each
C1FR18 02-112763
184

Cartridge Type Dual Pilot Operated Check Valves with Thermal Relief Integrated Hydraulics 4CKKT Series To 4350 PSI & 6.6 GPM
Features: Hardened and ground poppet gives excellent flow capability for valve size, positive sealing and long working life. Cartridge construction allows installation in actuators, manifold blocks and Hydraulic Integrated Circuits. Requires a machined C-10-4 cavity or housing for installation. Application: Pilot check valves allow flow to pass in one direction, with a low pressure drop, then prevent reverse flow until pilot pressure is applied. There are many applications for this valve type, the most common being to lock and hold a cylinder, or another hydraulic actuator, in position. A pilot relief valve will protect the cylinder and hoses from thermal expansion of the hydraulic fluid. See Introduction to Pilot-Operated Check Valves (Lock Valves) at the beginning of this section. Specifications: 6.6 gpm rated flow. 4350 psi maximum setting. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 5 drops per minute max internal leakage between ports 1 and 2. 15 drops per minute max internal leakage between ports 3 and 4. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 22 ft-lbs torque cartridge into cavity. Unrestricted mounting position. For compatible C-10-4 bodies see page 331 Cartridge Type Dual Pilot Operated Check Valves with Thermal Relief Integrated Hydraulics 4CKKT Series To 4350 PSI & 6.6 GPM
Catalog Part No. C1JZ75 Integrated Hydraulics Part No. 401AA00011A Integrated Hydraulics Model 4CKKT503S328 Pilot Ratio 3:1 Pressure Setting (psi) 4000 Pilot Seal Standard Body None Seal Material Nitrile Wt. 0.18 Price Each
Fluid Conveying
185

Inline Double Pilot Operated Check Valves Vickers DPC1-10 Series To 3000 PSI & 12 GPM
Application & Operation: See Introduction to Pilot-Operated Check Valves (Lock Valves) at the beginning of this section. Ratio of Pilot Piston Area to Check Valve Seat Area: 4:1. Rated Flow: 12 GPM. Maximum Operating Pressure: 3000 PSI. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cracking Pressure: 15 PSI Inline Double Pilot Operated Check Valves Vickers DPC1-10 Series To 3000 PSI & 12 GPM
Catalog Part No. Vickers Part No. Vickers Model DPC1-10-P-6T Port Size SAE-6 Seal Pilot Piston Seal Material No Buna-N Wt. 1.58 Price Each
C1BT61 566314
186

Counterbalance Valves (Overcenter Valves)
Introduction to Counterbalance Valves (Overcenter Valves)

Overview: There are now many types of overcenter or counterbalance valves available to the designer of hydraulically operated machines, each one has its own place and specific benefits to the user. The function of these valves can be divided into three basic groups. 1. Load Holding; where the overcenter valve prevents the movement of a load when the directional valve is in the neutral position. Permitting the use of open center directional valves and negating leakage past the spool of closed centre directional valves. 2. Load Control; where the overcenter valve prevents the actuator running ahead of the pump due to the load induced energy thereby eliminating cavitation in the actuator and loss of control. 3. Load Safety. In the case of hose failure an overcenter valve mounted onto or into an actuator will prevent uncontrolled movement of the load. When a boom is used as a crane then hose failure protection is vital as the loss of load control could cause damage to people or property. Each of these functions is applicable to linear or rotary motion. Application: Overcenter valves give static and dynamic control of loads by regulating the flow into and out of hydraulic actuators. When installed close to or within an actuator, the overcenter valve will stop runaway in the event of hose burst and if open center directional control valves are used, will allow thermal expansion relief of the hydraulic fluid. The overcenter cartridge is ideal for mounting directly into a cavity machined in the body of the cylinder, motor or rotary actuator. The cartridge can also be mounted directly to the ports via a specifically machined body as part of an integrated circuit or single unit, or contained within one of the standard line bodies. Single overcenter valves are normally used when the load is unidirectional, for example an aerial platform or crane and dual overcenter valves are used for controlling loads in both directions for motor applications or for cylinders going over center. Back Pressure: Overcenter valves should not be subjected to back pressure, as this will affect performance and can cause unstable operation. If back pressure cannot be avoided, as an option, a vented spring cavity design should be selected. Operation: The standard overcenter valve can be described as a pilot assisted relief valve with an integral free flow check. The difference between this design of valve and a pilot check is that the check valve will open fully as soon as the pilot pressure is sufficient to open the valve because the only resistance to opening is the pressure locked in to the cylinder port. With an overcenter valve the pilot pressure has to overcome the force of the spring which is reduced by load pressure. This ensures a gradual opening and a metering of the flow as it passes the poppet. Overcenter valves consist of a poppet that seals flow from an actuator, a check element, which permits free flow to the actuator and a pilot section that opens the poppet allowing flow from the actuator at a controlled rate. Pilot Ratios: Generally, lower pilot ratios consume more energy for load control but provide more stability. Pilot ratios should then be selected to give good controlability with a minimum of energy loss. Overcenter valves are available with various pilot ratios. Equal Area Valves: The equal area valve is used when pilot pressure must be set independent of any load-induced pressure, such as on a winch with a brake, where brake release pressure must be obtained before motion is allowed. Pilot Pressure Formula: The check section allows free flow into the actuator then holds and locks the load against movement. The pilot assisted relief valve section will give controlled movement when pilot pressure is applied. For most applications the relief setting should be approximately 1.3 times higher than the maximum load induced pressure. This ensures that with the maximum load on the actuator the valve will remain closed until pilot pressure is applied. The pilot pressure required to open the valve will depend on the pilot ratio that is the ratio between the relief area and the pilot area. The pilot pressure can be calculated: Pilot pressure = (Valve Setting - Load Pressure)/Pilot Ratio. Example: Valve Setting is 4000 PSI. Load Pressure is 1000 PSI. Valve Ratio is 3:1. Pilot Pressure = (4000-1000)/3, resulting in 1000 PSI required to start to move the load.
Fluid Conveying
187

Hydraulic Power & Control Important Holding Valve Basics: Apply in circuits to prevent loads from dropping faster than input flow would allow Use on the outlet of the controlled device (meter out) Always follow catalog recommendations and application directions Consult with our representative or the factory when in doubt NEVER apply a holding valve with a an unequal area to outriggers or stabilizers Do not expect motors to hold without mechanical gearing or brakes. Motors have internal clearances which will allow rotation to occur even when the overcenter valve does not leak When applying overcenter valves to life carrying machines such as boom/utility type equipment, do not separate the valve from the actuator... close-couple the valve to the actuator Care should be taken to ensure the load is supported by mechanical means when servicing or removing the valve (CAUTION: When servicing the equipment, trapped pressure may be present in the overcenter valve circuit. Carefully bleed down the trapped pressure before disassembly) When rebuilding machinery, you should replace rather than repair the overcenter valve The cylinder and it's seals must be in good condition.
Cartridge Type Counterbalance Valves Integrated Hydraulics 1CE20 Series To 5000 PSI & 5 GPM
Fluid Conveying
Features: The 1CE20 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve. Requires a machined A22903 cavity or housing for installation. Application: To control moving loads and prevent load runaway, giving load holding and hose failure safety. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section. Pilot Ratios: 3:1 - Best suited for extremely unstable applications such as long booms or flexible frameworks. 4.5:1 - Best suited for applications where load varies and machine structure can induce instability. 8:1 - Best suited for applications where the load remains relatively constant. Specifications: 5 gpm rated flow. 4000 psi max load induced pressure, 5000 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 30 ft-lbs torque cartridge into cavity. Unrestricted mounting position. Cartridge Type Counterbalance Valves Integrated Hydraulics 1CE20 Series To 5000 PSI & 5 GPM
Catalog Part No. C1JZ78 Integrated Hydraulics Part No. 406AA00002A Integrated Hydraulics Model 1CE20F35S4 Pilot Ratio 4.5:1 Adjustment Pressure Means Range (PSI) Screw with Locknut 2900-5075 Factory Setting (psi) 3045 Body None (Select below) Seal Material Nitrile Wt. 0.35 Price Each
188


Bodies for Integrated Hydraulics 1CE20 Overcenter Valve Cartridges
Catalog Part No. C1JZ92 Part Number 410AA00012A Description Body, Single Valve, SAE -6 Ports, Aluminum (3000 psi max), Integrated Hydraulics Model B24257 Wt. 0.80 Price Each
Fluid Conveying
Features: The 1CE30 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve. Requires a machined A6610 cavity or housing for installation. Application: To control moving loads and prevent load runaway, giving load holding and hose failure safety. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section. Pilot Ratios: 2.5:1 - Best suited for extremely unstable applications such as long booms or flexible frameworks. 5:1 - (standard) Best suited for applications where load varies and machine structure can induce instability. 10:1 - Best suited for applications where the load remains relatively constant. Specifications: 8 gpm rated flow. 4000 psi max load induced pressure, 5000 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 33 ft-lbs torque cartridge into cavity. Unrestricted mounting position.
189

Catalog Part No. C1JZ80 Integrated Hydraulics Part No. 406AA00006A Integrated Hydraulics Model 1CE30F35S10 Pilot Ratio 10:1 Adjustment Pressure Means Range (PSI) Screw with Locknut 1740-5075 Factory Setting (psi) 3045 Body None (Select below) Seal Material Nitrile Wt. 0.40 Price Each

Catalog Part No. C1JZ95 Part Number 410AA00015A Description Body, Dual Valve, SAE -6 Ports, Aluminum (3000 psi max), Integrated Hydraulics Model B10805 Wt. 0.90 Price Each
190

Cartridge Type Counterbalance Valves Integrated Hydraulics 1SE30 Series To 5000 PSI & 8 GPM
Fluid Conveying
Features: The 1SE30 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve. Requires a machined T11A Sun cavity or housing for installation. Application: To control moving loads and prevent load runaway, giving load holding and hose failure safety. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section. Pilot Ratios: 2.5:1 - Best suited for extremely unstable applications such as long booms or flexible frameworks. 5:1 - (standard) Best suited for applications where load varies and machine structure can induce instability. 10:1 - Best suited for applications where the load remains relatively constant. Specifications: 8 gpm rated flow. 4000 psi max load induced pressure, 5000 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 33 ft-lbs torque cartridge into cavity. Unrestricted mounting position. Cartridge Type Counterbalance Valves Integrated Hydraulics 1SE30 Series To 5000 PSI & 8 GPM
Catalog Part No. C1JZ83 Integrated Hydraulics Part No. 406AA00049A Integrated Hydraulics Model 1SE30F35S5 Pilot Ratio 5:1 Adjustment Pressure Means Range (PSI) Screw with Locknut 1015-5075 Factory Setting (psi) 3045 Body None Seal Material Nitrile Wt. 0.45 Price Each
191

Cartridge Type Counterbalance Valves Integrated Hydraulics 1SEB30 Series To 5000 PSI & 8 GPM
Features: The 1SEB30 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve with a spring chamber vented to atmosphere. Requires a machined T11A Sun cavity or housing for installation. Application: To control moving loads and prevent load runaway, giving load holding and hose failure safety. This pressure balanced valve is unaffected by back pressure, allowing service line reliefs to operate and for the valve to be used in regenerative or proportional valve systems. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section. Pilot Ratios: 5:1 - Best suited for applications where load varies and machine structure can induce instability. Specifications: 8 gpm rated flow. 4000 psi max load induced pressure, 5000 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 33 ft-lbs torque cartridge into cavity. Unrestricted mounting position. Cartridge Type Counterbalance Valves Integrated Hydraulics 1SEB30 Series To 5000 PSI & 8 GPM
Catalog Part No. C1JZ84 Integrated Hydraulics Part No. 406AA00052A Integrated Hydraulics Model 1SEB30F35S5 Pilot Ratio 5:1 Adjustment Pressure Means Range (PSI) Screw with Locknut 1087-5075 Factory Setting (psi) 3045 Body None Seal Material Nitrile Wt. 0.50 Price Each
192

Cartridge Type Counterbalance Valves Vickers CBV1/2-10 Series To 5000 PSI & 15 GPM
Features: Cartridge style (Requires a machined cavity or housing for installation). Application & Operation: See Introduction to Counterbalance Valves at the beginning of this section. Pressure Rating: 5000 PSI (CAUTION: Pressures over 3000 PSI require steel housing). Rated Flow: 15 GPM. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO level 18/16/13 or cleaner. Cartridge: Model CBV1-10*, sold separately. Housing: Cavity size C-10-3S, sold separately. Cartridge Type Counterbalance Valves Vickers CBV1/2-10 Series To 5000 PSI & 15 GPM
Catalog Part No. Vickers Part No. Free Flow Crack Pre-Set Control Adjustment Pressure Adjustment Pressure Seal (psi) (psi) Ratio Style Range (psi) Housing Material 4:1 Cap Over Screw 20 900-3000 -None (Select below) Buna-N Price Wt. Each 0.53
Fluid Conveying
Vickers Model CBV1-10-C-0-A-30/
C1AD25 02-171990
C1JU43
02-173219
CBV1-10-S-DA10T-A-3 0/
4:1
Screw with Locknut
20
900-3000
--
Dual Line-Moun ted, Light Duty Buna-N Aluminum, SAE-10 Ports
2.86
Housing Types: Aluminum STD (Standard light-duty aluminum 3000 psi maximum). Aluminum FR (Fatigue-rated aluminum 3000 psi maximum). Steel (Fatigue-rated Steel 5000 psi maximum).
Housings for Vickers CBV1-10 Counterbalance Valve Cartridges

Catalog Part No. Part Number Description Dual, Line Mounted Aluminum Housing (3000 PSI Max) with SAE-8 Ports Wt. 0.50 Price Each
C1AD18 02-160830
193

Housings for Vickers CBV1-10 Counterbalance Valve Cartridges
Catalog Part No. Part Number Description Single, Nipple Mounted Aluminum Housing (3000 PSI Max) with SAE-6 Ports Wt. 1.28 Price Each
C1AD19 02-160853
Cartridge Type Counterbalance Valves Integrated Hydraulics 1SE90 Series To 5000 PSI & 23 GPM
Features: The 1SE90 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve. Requires a machined T2A Sun cavity or housing for installation. Application: To control moving loads and prevent load runaway, giving load holding and hose failure safety. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section. Pilot Ratios: 4:1 - Best suited for applications where the load remains relatively constant. Specifications: 23 gpm rated flow. 4000 psi max load induced pressure, 5000 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 44 ft-lbs torque cartridge into cavity. Unrestricted mounting position. Cartridge Type Counterbalance Valves Integrated Hydraulics 1SE90 Series To 5000 PSI & 23 GPM
Catalog Part No. C1JZ85 Integrated Hydraulics Part No. 406AA00054A Integrated Hydraulics Model 1SE90F35S4 Pilot Ratio 4:1 Adjustment Pressure Means Range (PSI) Screw with Locknut 2537-5075 Factory Setting (psi) 3045 Body None Seal Material Nitrile Wt. 0.90 Price Each
194

Cartridge Type Counterbalance Valves Vickers CBV1/2-12 Series To 5000 PSI & 30 GPM
Fluid Conveying
Features: The CBV*-12 is a 3 port, externally piloted, screw-in cartridge type counterbalance valve. Cartridge style (Requires a machined cavity or housing for installation). Application & Operation: See Introduction to Counterbalance Valves at the beginning of this section. The counterbalance valve allows free flow from port 2 to port 1. Flow from port 1 to port 2 is blocked until either the predetermined pressure setting has been reached or sufficient pilot pressure has been applied to port 2 (pilot port). Pressure Rating: 5000 PSI (CAUTION: Pressures over 3000 PSI require steel housing). Rated Flow: 30 GPM. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO level 18/16/13 or cleaner. Cartridge: Model CBV1/2-12*, sold separately. Housing: Cavity size C-12-3S, sold separately, see page 330 Cartridge Type Counterbalance Valves Vickers CBV1/2-12 Series To 5000 PSI & 30 GPM
Catalog Part No. C1FQ52 Vickers Part No. Free Flow Crack Control Adjustment Pressure Adjustment Pre-Set Seal Ratio Style (psi) Range (psi) Pressure Housing Material 4:1 Screw with Locknut 25 900-3000 -None Buna-N Price Each
Vickers Model
Wt. 0.79
02-172086 CBV1-12-S-0-A-30/
195

Features: The 1CE140 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve. Requires a machined A20081 cavity or housing for installation. Application: To control moving loads and prevent load runaway, giving load holding and hose failure safety. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section. Pilot Ratios: 4:1 - Best suited for applications where load varies and machine structure can induce instability. 6:1 - Best suited for applications where the load remains relatively constant. Specifications: 37 gpm rated flow. 4930 psi max load induced pressure, 6090 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 110 ft-lbs torque cartridge into cavity. Unrestricted mounting position. Cartridge Type Counterbalance Valves Integrated Hydraulics 1CE140 Series To 6090 PSI & 37 GPM
Catalog Part No. C1JZ81 Integrated Hydraulics Part No. 406AA00026A Integrated Hydraulics Model 1CE140F30S4 Pilot Ratio 4:1 Adjustment Pressure Means Range (PSI) Screw with Locknut 3190-4785 Factory Setting (psi) 3915 Body None (Select below) Seal Material Nitrile Wt. 2.70 Price Each

196

Fluid Conveying
Features: The 1CE300 is a 3 port, externally piloted, screw-in cartridge-type counterbalance (overcenter) valve. Requires a machined A6935 cavity or housing for installation. Application: To control moving loads and prevent load runaway, giving load holding and hose failure safety. See Introduction to Counterbalance (Overcenter) Valves at the beginning of this section. Pilot Ratios: 3:1 - Best suited for applications where load varies and machine structure can induce instability. 8:1 - Best suited for applications where the load remains relatively constant. Specifications: 80 gpm rated flow. 4000 psi max load induced pressure, 5000 psi max relief pressure. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 60 drops per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 110 ft-lbs torque cartridge into cavity. Unrestricted mounting position. Cartridge Type Counterbalance Valves Integrated Hydraulics 1CE300 Series To 5000 PSI & 80 GPM
Catalog Part No. Integrated Hydraulics Part No. 406AA00031A Integrated Hydraulics Model 1CE300F35S3 Pilot Ratio 3:1 Adjustment Pressure Means Range (PSI) Screw with Locknut 1015-5075 Factory Setting (psi) 3045 Body None (Select below) Seal Material Nitrile Wt. 0.70 Price Each
C1JZ82

197

Cushion Valves
Cushion Valves (Double Relief Valves) Integrated Hydraulics 1CLLR50 Series To 3500 PSI & 12 GPM
Features: Single cartridge relieving in both directions cutting down space requirements, giving full adjustment through its range on both pressures at the same time. Requires a machined C-10-2 cavity or housing for installation. Application: To protect both lines in a circuit from over pressurization by relieving oil to the other line. Ideal for use with motors or directional valves as a safety relief. Differential area, fast acting, poppet valve. Specifications: Recommended Filtration Level: ISO level 18/13 or better. Installation: 44 ft-lbs torque cartridge into cavity. Unrestricted mounting position. For compatible C-10-2 bodies see page 329 Cushion Valves (Double Relief Valves) Integrated Hydraulics 1CLLR50 Series To 3500 PSI & 12 GPM
Catalog Part No. C1JZ86 Integrated Hydraulics Part Integrated Pressure No. Hydraulics Model Range (PSI) 407AA00013A 1CLLR50F25S 1100-2900 Factory Setting (psi) 1740 Adjustment Means Screw Body None Seal Material Nitrile Wt. 0.50 Price Each
198

Cushion Valves
Cushion Valves (Double Relief Valves) Vickers CRV-10 Series To 3000 PSI & 20 GPM
Features: Components can be purchased separately, see Note below. Aluminum in-line type housing. Relief cartridges can be removed from the housing without disturbing the plumbing. Application: Cushion valves are used to provide pressure relief for bi-directional motors and cylinders. (For cylinder applications, cylinder displacement must be equal in both directions for oil to relieve from one side to the other). Rated Flow: 20 GPM. Maximum Operating Pressure: 3000 PSI. Re-Seat Pressure: 90% of cracking pressure. Temperature Range: -40F to 248F (Extreme limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or better. Note: Components can be purchased separately. One (1) Housing, Two (2) Cartridges and Two (2) Seal Kits are required to make the cushion valve assembly. For each cartridge, remove the standard back-up ring and install two (2) half-thickness back-up rings, one on each side of o-ring. Cushion Valves (Double Relief Valves) Vickers CRV-10 Series To 3000 PSI & 20 GPM
Catalog Part No. C1JR22 Vickers Part No. 02-178481 Vickers Model Description Wt. 2.43 1.26 0.51 0.53 0.01 Price Each Complete Assembly. Aluminum Housing with SAE-8 Ports, 2ea Relief CRV-10-S-A8T-36/ Cartridges with 600-3600 PSI adjustment range (not for use above 3000 PSI in this application), Adjusting screw with locknut, Buna-N seals. Aluminum Housing with SAE-8 Ports (1 required per assembly) RV3-10-S-0-3/ RV3-10-S-0-36/ SK2-10-2 Relief Cartridge, 50-300 PSI adjustment range, Adjusting screw with locknut, Buna-N seals (2 required per assembly) Relief Cartridge, 600-3600 PSI adjustment range (not for use above 3000 PSI in this application), Adjusting screw with locknut, Buna-N seals (2 required per assembly) Buna-N Seal Kit (2 required per assembly)
Fluid Conveying
C1CA63 889185 C1ET93 566688
C1BT34 565568 C1FK22 565806
Note: Components can be purchased separately. One (1) Housing, Two (2) Cartridges and Two (2) Seal Kits are required to make the cushion valve assembly. For each cartridge, remove the standard back-up ring and install two (2) half-thickness back-up rings, one on each side of o-ring.
199

Cushion Valves
Cushion Valves (Double Relief Valves) Cross Series RC To 3000 PSI & 30 GPM
Features: Cartridge type hydraulically dampened poppet design. Quiet. Smaller differential between cracking and full-flow pressures. Application: Cross model RC Cushion Valves are designed to protect equal displacement cylinders or motors from external or shock loads. Fluid which passes through one relief valve flows directly to the opposite side or circuit of the valve, thus preventing cavitation of the cylinder or motor as a result of relief discharge. (For cylinder applications, cylinder displacement must be equal in both directions for oil to relieve from one side to the other). Materials: High tensile gray iron housing. Hardened and ground steel poppet. Buna-N seals. Maximum Flow Rate: 30 GPM Maximum. Maximum Operating Pressure: 3000 PSI. Cushion Valves (Double Relief Valves) Cross Series RC To 3000 PSI & 30 GPM
Catalog Part No. C1DJ87 Cross Model RC12BB Port Size 3/4 NPT Adjustment Type Screw Adjustment with Acorn Nut Adjustment Range (psi) 500-1500 Pressure Setting (psi) 1000 Wt. 4.00 Price Each
200

Cushion Valves
Cushion Valves (Double Relief Valves) Integrated Hydraulics 1CLLR100 Series To 5000 PSI & 40 GPM
Fluid Conveying
Features: Single cartridge relieving in both directions cutting down space requirements, giving full adjustment through its range on both pressures at the same time. Requires a machined A878 cavity or housing for installation. Application: To protect both lines in a circuit from over pressurization by relieving oil to the other line. Ideal for use with motors or directional valves as a safety relief. Differential area, fast acting, poppet valve. Specifications: 40 gpm rated flow. 5000 psi maximum setting. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 0.31 cubic inches per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. 12 gpm rated flow. 3500 psi maximum setting. CAUTION: Pressures over 3000 psi require a steel housing. -22 to +194F operating temperature range. 0.31 cubic inches per minute max internal leakage. Based on oil temperature of 104F and 150 SSU. Recommended Filtration Level: ISO level 18/13 or better. Installation: 44 ft-lbs torque cartridge into cavity. Unrestricted mounting position. Cushion Valves (Double Relief Valves) Integrated Hydraulics 1CLLR100 Series To 5000 PSI & 40 GPM
Catalog Part No. C1JZ87 Integrated Hydraulics Part Integrated Pressure No. Hydraulics Model Range (PSI) 407AA00014A 1CLLR100F35S 1650-5075 Factory Setting (psi) 4060 Adjustment Means Screw Body None, see below Seal Material Nitrile Wt. 0.52 Price Each
Bodies for Integrated Hydraulics 1CLLR100 Dual Relief Valve Cartridges

Catalog Part No. C1JZ91 Part Number 410AA00008A Description Body, SAE -12 Ports, Aluminum (3000 psi max), Integrated Hydraulics Model B10623 Wt. 1.60 Price Each
201

Directional Valves, Manually Operated
2-Way 2-Position Pull-To-Open Manual Valves Vickers MPV1-10 Series To 3000 PSI & 12 GPM
Features: Cartridge style (Requires a machined cavity or housing for installation). Pull-to-open knob. Application: For on-off control of a single stream of fluid. Pull-to-open. Release to close (spring returns valve to closed). Maximum Operating Pressure: 3000 PSI. Rated Flow: 12 GPM. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model MPV1-10*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329
2-Way 2-Position Pull-To-Open Manual Valves Vickers MPV1-10 Series To 3000 PSI & 12 GPM
Catalog Part No. Vickers Part No. Vickers Model MPV1-10-K-0 Housing None Seal Material Buna-N Wt. 0.25 Price Each C1BT36 565589
202

Directional Valves, Manually Operated
Subplate/Manifold Mount NFPA Size D03 Manual Valves Vickers DG17V-3 Series To 5000 PSI & 20 GPM
Features: Subplate mounted. Viton seals standard. Application: Compact high-pressure manual control valve for double acting cylinders or reversible motors. Maximum Flow Capacity: 20 GPM. Maximum Operating Pressure: 5000 PSI Ports P, A and B. 100 PSI Port T (Intermittent to 1450 PSI) (CAUTION: Need steel subplate or manifold for pressures over 3000 PSI). Recommended Filtration Level: ISO level 18/15 or cleaner. Mounting Bolts: Standard mounting bolts are (4) 10-24 x 1-1/4 Grade 8 socket head capscrews (Vickers Bolt Kit 590716), torqued to 40-50 lb. in. See Bolt Kits on page 328 Size D03 Subplates & Manifolds: page 336
Fluid Conveying
Subplate/Manifold Mount NFPA Size D03 Manual Valves Vickers DG17V-3 Series To 5000 PSI & 20 GPM
Catalog Part No. C1AC70 Vickers Part No. 02-135316 Key A Vickers Model DG17V-3-6C-60 Type 4-way 3-position Spool Action Spring Centered Spool Type In Center, P Blocked, A & B to Tank Other Features Wt. 4.10 Price Each
203

Directional Valves, Monoblock
1-2-3 Spool Monoblock Valves Eaton 30900 Series To 3000 PSI & 5 GPM
Features: Open Center Parallel Circuit design. Available in single spool, two spool and three spool configurations. Available in a variety of spool types and spool actions. Built-in load checks (not on Motor spools). Available with or without adjustable main relief valve, standard setting 2000 PSI. Application: For general mobile and industrial hydraulic applications. 3-way models control a single acting cylinder or uni-directional motor. 4-way models control a double acting cylinder or reversible hydraulic motor. Materials: Cast iron bodies. Precision ground induction hardened spools with chrome plating on exposed ends. Pressure Ratings: Rated Pressure: 3000 PSI. Maximum Inlet Pressure: 3500 PSI. Maximum Work Port Pressure: 4500 PSI. Flow Rating: 5 GPM. Maximum System Temperature: 225F. Power Beyond: Body is bored for Power Beyond and is plugged. Valves can be converted to Power Beyond (High Pressure Carryover) with an option kit (31900-321 for SAE-6, 31900-341 for SAE-8). This option allows the installation of another valve downstream from the first valve. Hydraulic oil is available to the downstream valve only when the spool in the upstream valve is in neutral. A separate tank line is required from each control valve. Closed Center : Valves can be converted to Closed Center with an option kit (31900-319). Dimensions & Technical Information: page 529
1-2-3 Spool Monoblock Valves Eaton 30900 Series To 3000 PSI & 5 GPM
Catalog Part No. Eaton Model Spools 2-Spool Power Spool Type Beyond Work Ports Inlet Port Outlet Port 4-way 3-position Plugged Tandem Center SAE-6 SAE-8 SAE-8 Spool Action Spring Centered Relief Setting (PSI) 2000 Wt. 6.23 Price Each
C1ES92 30922-DSC
Note: Handles are NOT included with valve, and are sold separately.
Parts & Accessories for Eaton 31900 Monoblock Directional Valves

Catalog Part No. Part Number Handle Kit Description Wt. 0.21 Price Each
C1EV79 30950-901
204

1-Spool Monoblock Valves Walvoil SD4 Series To 3600 PSI & 12 GPM
Features: Simple, compact design, one-spool valve for open and closed center hydraulic systems Main pressure relief valve Optional rotary and detent kick-out controls Optional cable control Interchangeable spools. Nominal Flow Rating: 12 GPM. Maximum Operating Pressure: 3600 PSI. Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.18 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 545
Fluid Conveying
1-Spool Monoblock Valves Walvoil SD4 Series To 3600 PSI & 12 GPM
Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. 4.43 0.60 0.26 0.10 Price Each Valve assy (SD4/1SV/68L-SAE), closed ctr, 4-way 3-pos, A & B closed in neutral, (1) spring cent, no rlv. Rlv blanking plug (2), std lever box (5) does NOT include M8 thread handlever (II). SAE-8 ports P & T, SAE-6 ports A & B. (2) Inlet relief valve blanking plug (Type SV) (4) "A" side spool positioner (Type 11), with detent in positions 1, neutral and 2 (II) Handlever (Type AL01/M8x120), for standard leverbox, M8 thread x 120mm long, with black knob
C1HV44 FVL101119018 C1HV78 XTAP623282 C1HV51 FVL5V11104000 C1AL39 170011012
205

1 to 7 Spool Monoblock Valves Walvoil SD5 Series To 4600 PSI & 12 GPM
Features: Simple , compact and heavy duty designed monoblock valves from 1 to 7 sections for open and closed center hydraulic systems. Fitted with a main pressure relief valve and a load check valve. Available with parallel, series or tandem circuit. Optional power beyond port (only for parallel or tandem circuit). Diameter 0.63 inch interchangeable spools. A wide variety of service port valve options. Actuation is manual, pneumatic, electro-pneumatic, hydraulic, electro-hydraulic, with solenoid and remote with flexible cables spool control kits. Nominal Flow Rating: 12 GPM. Maximum Operating Pressure: 4600 PSI (Parallel or Tandem circuit), 3600 PSI (Series circuit). Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.18 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 546
Catalog Part No. C1JG37 Walvoil Model SD51PKG328LAE SAE FVL9510007 Key Description & (Walvoil Type Code) Wt. 8.16 0.60 Price Each
Valve assy (SD5/1-P(KG3-120)/28L/AE-SAE), power beyond, 1-spool, 4-way 3-pos, (1) A&B open to tank in neutral, spring center, relief valve 900-2900 psi set 1750 psi, Std lever box (5) does NOT include M8 handlever (II). SAE-8 ports P,T,C, SAE-6 ports A&B. (2) Inlet relief valve blanking plug (Type SV)
C1HV78 XTAP623282
206


Catalog Part No. C1HU72 C1AL39 Walvoil Model 5V08105350 170011012 Key Description & (Walvoil Type Code) Wt. 3.40 0.10 Price Each
"A" side spool positioner (Type 8ED3), On/Off electro-hydraulic, 12VDC (Requires 2ea (4) solenoid connectors, needs external pilot and drain unless Collector Kit is used.) Contact us for technical assistance with this option. Handlever (Type AL01/M8x120), for standard leverbox, M8 thread x 120mm long, with (II) black knob
Features: Simple, compact and heavy duty designed monoblock valves from 1 to 6 spools for open and closed center hydraulic systems Main pressure relief valve and load check valve Available with parallel or series circuit Optional power beyond port (for parallel circuit) Interchangeable spools Wide variety of service ports and circuit valves Spool control kits for manual, pneumatic, hydraulic, electro-hydraulic and remote with flexible cable controls. Nominal Flow Rating: 18 GPM. Maximum Operating Pressure: 4600 PSI (Parallel circuit), 3600 PSI (Series circuit). Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.18 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 549
Fluid Conveying
207

Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. Price Each
C1HX82 FVL104130102
Valve assy (SD11/1-P(KG4-220)/18L/AET-SAE), open ctr 1-spool, parallel 4way3pos (1) A&B closed in neutral spring cent. Dir press rlv (2) 2600-4600 PSI set 3200, std 13.70 leverbox (5) does NOT include M10 handlever (II). SAE-10 P & T (top outlet), SAE-8 A & B. Valve assy (SD11/1-P(KG3)/28L/AET-SAE), open ctr 1-spool, parallel 4way3pos A&B open to tank in neutral, spring cent. Dir press rlv (2) 1150-2900 PSI set 1750, std (1) leverbox (5) does NOT include M10 handlever (II). SAE-10 P & T (top outlet), SAE-8 A 13.59 & B. Valve assy (SD11/2-P(KG3)/18Lx2/AET-SAE) , open ctr 2-spool, parallel 4way3pos (1) A&B closed in neutral spring cent. Dir press rlv (2) 1150-2900 PSI set 1750, std leverboxes (5) does NOT include M10 handlevers (II). SAE-10 P & T (top outlet), SAE-8 A & B. Valve assy (SD11/3-P(KG3)/18Lx3/AET-SAE), open ctr 3-spool, parallel 4way3pos A&B closed in neutral spring cent. Dir press rlv (2) 1150-2900 PSI set 1750, std (1) leverboxes (5) does NOT include M10 handlevers (II). SAE-10 P & T (top outlet), SAE-8 A & B. Direct pressure relief (Type YG3-175), 1800-3600 PSI range, standard setting 2500 (2) PSI. (3) Spool (Type 2), 4-way 3-position, A & B open to tank in neutral (4) "A" side spool positioner (Type 11), with detent in positions 1, neutral and 2 (4) "A" side spool positioner (Type 8P), On/Off pneumatic, NPT (5) "B" side option (Type L), standard lever box, M10 thread (does NOT include M10 thread handlever) (6) Outlet port conversion option (Type AEK), closed center plug (6) Outlet port conversion option (Type AE), power beyond sleeve, SAE-10 (II) Handlever (Type AL01/M10x200), for standard leverbox, M10 thread x 200mm long, with black knob (II) Handlever (Type AL01/M12x250), for mechanical joystick, M12 thread x 250mm long, with black knob 21.67
C1HV54 FVL91110017
C1HV45 FVL104219001
C1HV46 FVL104319004
28.80
C1HT16 3XCAR110213 C1HZ84 C1JC50 3CU1425130 5V08110701
0.63 0.76 0.56 1.41 0.49 0.32 0.38 0.28 0.50
C1HV52 FVL5V11110000
C1HT95 5LEV110000 C1HV50 FVL3XTAP532450 C1HV49 FVL3XGIU532660 C1HQ47 170012020 C1HQ59 170013025
208

1-Spool Monoblock Valves Brand AO755 Series To 3000 PSI & 18 GPM
Features: Small and compact. Positive metering in either direction. Precision ground chrome plated spool for long life. Application: AO755 manually operated valves provide metered flow to either work port. Work port flow is directly proportional to the movement of the lever. The tank port must go directly back to tank. Materials: Cast iron body. Buna-N O-Rings. Chrome plated steel spool. Black nylon ball knob. Maximum Operating Pressure: 3000 PSI. Nominal Flow Rating: 18 GPM. Recommended Filtration: 30 Micron. Dimensions & Technical Information: page 526
Fluid Conveying
1-Spool Monoblock Valves Brand AO755 Series To 3000 PSI & 18 GPM
Catalog Part No. Brand Model Key D F G Type 4-way 3-position 4-way 3-position 4-way 3-position Spool Action Spring Centered Detented Spring Centered Spool Type Tandem Center Tandem Center Tandem Center Ports 3/4NPT Inlet & Outlet 1/2NPT Work Ports 3/4NPT Inlet & Outlet 1/2NPT Work Ports 3/4NPT Inlet & Outlet 1/2NPT Work Ports Other Features No Relief No Relief Adjustable Relief (Set @ 1500 PSI) Wt. 5.24 6.00 6.06 Price Each
C1EK85 AO755-T4-LS C1HE38 AO755-T4-LD C1HE39 AO755-T4-LRS
209

1-Spool Monoblock Valves (Log Splitter Valves) Brand LS755 Series To 3000 PSI & 18 GPM
Features: Single Hydraulic Kick-Out designed primarily for log splitters. Small and compact. Fine positive metering in either direction. Precision ground chrome plated spool. Application: Spring center hydraulic detent (SHA model) springs back to neutral from one position and pressure release detent in the other direction when the cylinder completes its return stroke. Hydraulic detent in both directions (HHA model, not recommended for log splitters) pressure detent in both directions and springs to center when out of detent. Materials: Cast iron body. Buna-N O-Rings. Brass guide. Chrome plated steel spool. Black nylon ball knob. Maximum Operating Pressure: 3000 PSI. Nominal Flow Rating: 18 GPM. Recommended Filtration: 30 Micron. Dimensions & Technical Information: page 526
1-Spool Monoblock Valves (Log Splitter Valves) Brand LS755 Series To 3000 PSI & 18 GPM
Catalog Part No. Brand Model Key A Type Spool Action Spool Type Tandem Center Ports 3/4NPT Inlet & Outlet 1/2NPT Work Ports Other Features Adjustable Relief (Set @ 2000 PSI), Adjustable Kick-Out (Set @ 800 PSI) Wt. 6.01 Price Each
C1ZU70 LS755T4JRSHA
Log Splitter 4-way (See 3-position Below)
Log Splitter Spool Action: Valve is spring centered in one direction (P to B) and has a hydraulic detent release in the other direction (P to A).
210

1-Spool Monoblock Valves (With Pressure Comp. Flow Control) Brand SDCF Series To 3000 PSI & 18 GPM
Features: Full range pressure compensated bypass type flow control valve is built in. Pilot operated relief valve is standard. Fine positive metering in either direction. Precision ground chrome plated spool for long life. Application: SDCF valves combine the features of a 4-way directional control valve, a full range pressure compensated by-pass type flow control valve and a pilot operated pressure relief valve all in one compact package. Flow to the work port is directly proportional to the movement of the lever. Flow out of each work port is constant regardless of load changes. The tank port must be plumbed directly back to tank. Materials: Cast iron body. Buna-N O-Rings. Chrome plated steel spool. Maximum Operating Pressure: 3000 PSI. Nominal Flow Rating: 18 GPM. Recommended Filtration: 30 Micron. Dimensions & Technical Information: page 527
Fluid Conveying
1-Spool Monoblock Valves (With Pressure Comp. Flow Control) Brand SDCF Series To 3000 PSI & 18 GPM
Catalog Part No. C1JD16 Brand Model SDCF755TM12SLF1 Key A Type 4-way 3-position Spool Action Friction Detent Spool Type Tandem Center Flow Range (GPM) 0-12 Ports 3/4NPT Inlet & Outlet 1/2NPT Work Ports Other Features Stainless Spool, Adjustable Relief Stainless Spool, Adjustable Relief Wt. 7.84 Price Each
C1JD15
SDCF755TM124LSSS
4-way 3-position
Spring Centered
Tandem Center
0-12
3/4NPT Inlet & Outlet 1/2NPT Work Ports
7.83
Option Kits & Parts for Brand SDCF Series Valves

Catalog Part No. C1JB77 Part Number Spring Centering Kit Ball Friction Detent Kit SDC-F1 Description Wt. 0.37 0.63 Price Each C1DK84 SDC-S
211

Directional Valves, Proportional NFPA Size D03 ISO 4401 Size 03 Vickers KDG4V-3 & KDG4V-3S Series Without Feedback
Vickers KDG4V-3 & KDG4V-3S Proportional Valves Without Feedback NFPA Size D03, ISO 4401 Size 03
Description: The primary function of these valves is to direct and meter fluid flow in proportion to current received by the solenoid. This fluid flow controls the velocity, direction and acceleration or deceleration of a cylinder or fluid motor. The valve is controlled by applying current to the coil. This current produces a force at the solenoid push pin which, in turn, causes spool travel. The spool will continue it's motion until the solenoid force is balanced by the return spring force. Application: These valves are designed to fill the performance gap between conventional solenoid operated directional valves and servo valves or feedback-type proportional valves. They provide control of spool position and metered fluid flow in applications that don't require the high levels of accuracy, repeatability or response possible with feedback-type proportional valves or servos. Features: NFPA fatigue rated at 5000 PSI. Fully encapsulated solenoid coils. NEMA 4 rated junction box. Standard Viton seals. Nominal Flow Rating: 5.8 GPM (72 PSI pressure drop P to A, 72 PSI pressure drop B to T). Maximum Operating Pressure: 5000 PSI Ports P, A and B. (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Port T: 1450 PSI for Standard Performance Valves, 3000 PSI for High Performance Valves. Operating Temperature Range: -4F to 180F. Fluid Viscosity Range: 75 to 250 SSU. Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 for pressures to 3000 PSI; Level 17/15/12 for pressures above 3000 PSI. Note: Vickers publication 539 provides the additional technical information necessary for proper application of these proportional valves. Contact us for application assistance or to request a copy of the Vickers publication. Electronic Accessories (Amplifier Cards, Power Plugs): page 340 Size D03 Subplates & Manifolds: page 336 Solenoid Connectors: page 333 (Required for models that use DIN 43650 coils). Mounting Bolts: Standard mounting bolts are (4) 10-24 x 1-1/4 Grade 8 socket head capscrews (Vickers Bolt Kit 590716 BK590716), torqued to 40-50 lb.in. with threads lubricated. See Bolts Kits on page 328
4-way, 3-position, Spring Centered All Ports Blocked in Center

Spool Flow Rating: P to A or B to T Flow at 72 PSI Pressure Drop. Coil Rating: Current Controlled models are for use with Power Plugs, Amplifier Cards or Joystick Controllers in more demanding applications where current is varied across the coil. Direct Voltage models are for use in less sophisticated and intermittent duty applications where voltage is varied across the coil. 4-way, 3-position, Spring Centered All Ports Blocked in Center
Catalog Part No. C1AD14 Vickers Part No. 02-154277 Spool Flow Rating (GPM) 2.0 Metering Condition Meter In & Meter Out Meter In & Meter Out Coil Rating Price Each
Vickers Model KDG4V-3S-2C08NH-M-U-H5-60 KDG4V-3S-2C19NH-M-U-H5-60
Coil Type
Other Features
Wt. 5.00
24VDC STD Performance, 1450 PSI Current DIN 43650 Port T, Waterproof Manual Controlled Override 24VDC STD Performance, 1450 PSI Current DIN 43650 Port T, Waterproof Manual Controlled Override
C1ER20
02-317856
5.0
4.89
212

Directional Valves, Proportional NFPA Size D03 ISO 4401 Size 03 Vickers KDG4V-3 & KDG4V-3S Series Without Feedback
4-way, 3-position, Spring Centered Port P Blocked, Ports A & B Bleed to T in Center
Spool Flow Rating: P to A or B to T Flow at 72 PSI Pressure Drop. Coil Rating: Current Controlled models are for use with Power Plugs, Amplifier Cards or Joystick Controllers in more demanding applications where current is varied across the coil. Direct Voltage models are for use in less sophisticated and intermittent duty applications where voltage is varied across the coil.
4-way, 3-position, Spring Centered Port P Blocked, Ports A & B Bleed to T in Center
Catalog Part No. C1JC47 Vickers Part No. Spool Flow Rating (GPM) 0.8 Metering Condition Meter In Only Coil Rating Price Each
Vickers Model
Coil Type
Other Features
Wt. 5.27
02-311985 KDG4V-3-33C03F-H -M-U-H7-60 02-154278 KDG4V-3S-33C08AH-M-U-H5-60 KDG4V-3S-33C22AH-M-U-G5-60 -60
24VDC High Performance, 3000 PSI Current DIN 43650 Port T, Waterproof Manual Controlled Overrides 24VDC STD Performance, 1450 PSI Current DIN 43650 Port T, Waterproof Manual Controlled Overrides 12VDC STD Performance, 1450 PSI Current DIN 43650 Port T, Waterproof Manual Controlled Overrides 24VDC STD Performance, 1450 PSI Current DIN 43650 Port T, Waterproof Manual Controlled Overrides
C1AD15
2.0
Meter In Only
5.00
C1HY30
02-148363
5.8
Meter In Only
5.00
Fluid Conveying
C1AD44
02-309901 KDG4V-3S-33C22AH-M-U-H5-60
5.8
Meter In Only
5.00
Vickers KDG4V-3 & KDG4V-3S Series Parts & Accessories
Vickers KDG4V-3 & KDG4V-3S Series Parts & Accessories

Catalog Part No. Vickers Part No. Description DIN 43650 Solenoid Connector, Strain Relief Style for cable diameter 0.24 to 0.31, not wired, no light DIN 43650 Solenoid Connector, Strain Relief Style for cable diameter 0.31 to 0.41, not wired, light for 6-48 VAC/VDC 50/60 Hz Wt. 0.25 0.05 Price Each
C1BS52 5100-10900
C1FK20 5103-1090000
213

Directional Valves, Proportional NFPA Size D03 ISO 4401 Size 03 Vickers KFDG4V-3 Series With Feedback
Vickers KFDG4V-3 Proportional Valves With Feedback NFPA Size D03, ISO 4401 Size 03
Description: The primary function of these valves is to direct and meter fluid flow in proportion to current received by the solenoid. This fluid flow controls the velocity, direction and acceleration or deceleration of a cylinder or fluid motor. The valve is controlled by applying current to the coil. This current produces a force at the solenoid push pin which, in turn, causes spool travel. The spool will continue it's motion until the LVDT's feedback signal balances with the input signal, ensuring accurate spool position control. Application: These valves are designed to fill the performance gap between non-feedback type proportional valves and servo valves. They provide control of spool position and metered fluid flow in applications that don't require the highest levels of accuracy, repeatability or response possible with servo valves. Features: Electronic feedback LVDT ensures accurate spool position control. Internal current feedback provides optimal control. Standard Viton seals. Nominal Flow Rating: 5.8 GPM (72 PSI pressure drop P to A, 72 PSI pressure drop B to T). Maximum Operating Pressure: 5000 PSI Ports P, A and B. (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Port T: 1500 PSI. (Port L blocked by mounting surface). Maximum Allowable Temperature Ranges: Ambient Air: 140F. Fluid: 140F. Fluid Viscosity Range: 70-245 SSU Recommended, 70-2270 SSU Extreme. Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 for pressures to 3000 PSI; Level 17/15/12 for pressures above 3000 PSI. Note: Vickers publication 5071.00/EN/0298/A provides the additional technical information necessary for proper application of these proportional valves. Contact us for application assistance or to request a copy of the Vickers publication. Electronic Accessories (Amplifier Cards): page 340 Size D03 Subplates & Manifolds: page 336 Mounting Bolts: Standard mounting bolts are (4) 10-24 x 1-1/4 Grade 8 socket head capscrews (Vickers Bolt Kit 590716 BK590716), torqued to 40-50 lb.in. with threads lubricated. See Bolts Kits on page 328
4-way, 3-position, Spring Centered All Ports Blocked in Center

Spool Flow Rating: P to A or B to T Flow at 72 PSI Pressure Drop. Wiring Connectors: Solenoid coil and LVDT wiring connectors are included with valve. Cable for solenoid coils can range from 0.24-0.40 inch diameter. Cable for LVDT can range from 0.138-0.236 inch diameter. 4-way, 3-position, Spring Centered All Ports Blocked in Center
Catalog Part No. C1BT19 Vickers Part No. 565376 Spool Flow Rating (GPM) 5.28
Vickers Model KFDG4V-3-2C20N-Z -M-U1-H7-20
Metering Condition Meter In & Meter Out
Coil Rating
Coil Type
Other Features
Wt. 6.35
Price Each
24VDC 1500 PSI Port T, No Manual Amplifier DIN 43650 Override Supplied
214

Directional Valves, Sectional Open & Closed Center Walvoil SD6 Series Flows to 12 GPM (Nominal) Pressures to 4600 PSI
Sectional Control Valves for Open & Closed Center Systems Walvoil SD6 Series
Features: Simple, compact and heavy duty designed sectional valve from 1 to 12 sections, for open and closed center hydraulic systems Main pressure relief valve Load check valve on every work section Available with parallel, tandem or series circuit Optional power beyond port Available with manual, pneumatic, hydraulic, electro-hydraulic, solenoid or cable controls Interchangeable spools. Nominal Flow Rating: 12 GPM. Maximum Operating Pressure: 4600 PSI (Parallel or Tandem circuit). 3050 PSI (Series circuit). Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.18 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 547
Fluid Conveying
SD6 Inlet Covers & Options

Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. 3.61 0.60 Price Each
C1HU98 612205001 C1HV78 XTAP623282
Inlet cover (FE-SD6/AC(YG3)-SAE) with direct pressure relief (3) 1800-3600 PSI range (1) and standard setting 2500 PSI, with blanking plug (4). SAE-8 top inlet port P and plugged SAE-8 end inlet. (3) Inlet relief valve blanking plug (Type SV)
215

SD6 Working Sections & Options

Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. 4.99 Price Each
C1HU94 612105076
Working section (EL-SD6/P-18L-SAE) , parallel circuit, 4-way 3-pos A & B closed in (1) neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-6 work ports. Does NOT include M8 thread handlever. Working section (EL-SD6/P-28L-SAE), parallel circuit, 4way3-pos A & B open to tank in (1) neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-6 work ports. Does NOT include M8 thread handlever. "A" side spool positioner (Type 8ED3), On/Off electro-hydraulic, 12VDC (Requires 2ea (3) solenoid connectors, 1ea Electro-Hydraulic Feeder Kit and Back Pressure Valve) Handlever (Type AL01/M8x120), for standard leverbox, M8 thread x 120mm long, with (II) black knob Handlever (Type AL01/M10x150), for optional leverbox, M10 thread x 150mm long, (II) with black knob (II) Handlever (Type AL01/M12x250), for mechanical joystick, M12 thread x 250mm long, with black knob
C1HU95 C1HU72 C1AL39
612105343 5V08105350 170011012
5.00 3.40 0.10 0.23 0.50
C1HN55 170012015 C1HQ59 170013025
216

SD6 Electro-Hydraulic Feeder Kits & Options

C1HT30 4TAP413210
(3) G 1/4 plug for power beyond / closed center option (Type RE)
SD6 Outlet Cover & Options
Fluid Conveying

C1HV11 612305002 C1HT30 4TAP413210
(1) Outlet cover (FS-SD6/RD-SAE) , SAE-8 top outlet port T, plugged SAE-8 end outlet, machined for optional power beyond/closed center conversion (3) G 1/4 plug for power beyond / closed center option
SD6 Tie Rod & Mounting Bracket Kits
217

Catalog Part No. C1HU17 C1HU20 Walvoil Model 5TIR108155 5TIR108193 Key Description & (Walvoil Type Code) Wt. 0.46 0.57 0.68 0.52 Price Each
(1) Tie rod kit for a 2-section valve assembly (1) Tie rod kit for a 3-section valve assembly (1) Tie rod kit for a 4-section valve assembly (2) Brackets kit
C1HU22 5TIR108231 C1HT99 5STA120160
218

Directional Valves, Sectional Open & Closed Center Husco Model 5000 Flows to 20 GPM (Nominal) Pressures to 3000 PSI
Sectional Control Valves for Open & Closed Center Systems Husco Model 5000
Features: 3000 psi operating pressure rating Open-center or closed-center operation Hard chrome plated spools Load check in each section Single low pressure O-ring sealing between sections Precision spool with metering notches. Options: High pressure carryover (Power Beyond) Lock-out spool section (Built-in pilot operated check valve section) Mid-inlet flow combiner or separator Left-hand spool sections Parallel, Conventional and Series circuitry End mechanisms: Spring centered, Detent, 4th position float, Hydraulic remote, Pneumatic remote, Automatic kick-out Auxiliary valves: Pilot-operated, anti-cavitation check combination relief cartridges, Anti-cavitation cartridges Regenerative spools Specialized spools. Maximum Operating Pressure: 3000 PSI. Maximum Outlet Port/Tank Core Pressure: 500 PSI. Seals: Buna-N standard, Viton optional. Parallel Circuits: In a Parallel Circuit valve assembly, two or more spools may be actuated at the same time and the oil will follow the path of least resistance. If the loads are different and the spools are fully shifted, the lightest load will operate first. If the spools are not fully shifted and the oil is metered, it is possible to direct partial flow to both loads. Power Beyond & Closed Center Options: Valve assemblies can be made Power Beyond or Closed Center by selecting and configuring the appropriate Outlet Cover. Dimensions & Technical Information: page 530
Fluid Conveying
219

Husco Model 5000 Sectional Valve Components

Catalog Part No. C1JP54 C1JP46 C1JP54 C1JN40 C1JP56 C1JP54 Husco Model N5060-P/2000/5 N5002-A1 N5060-P/2000/5 B11-100 N52250-1 N5060-P/2000/5 Key Description Wt. 3.80 Price Each
Pilot-Operated Main Relief Valve, 1500-3500 PSI Adjustment Range, Set at 2000 PSI (2) @ 5 GPM, has Anti-Cav Check Spool Section (Std Parallel Circuit), Cylinder Spool, 4-way 3-position spring-centered, (3) SAE-8 Work Ports, without Auxiliary Valve Ports. Requires 1ea Item (6) (4) Work Port Relief Valve with Anti-Cav Check, Pilot-Operated, 1500-3500 PSI Adjustment Range, Set at 2000 PSI @ 5 GPM (5) 3-Position Detent Kit for Std Parallel Spool Sections (6) Lever Kit, Fixed Position, Vertical (8) Pilot-Operated Power Beyond Relief Valve, 1500-3500 PSI Adjustment Range, Set at 2000 PSI @ 5 GPM, has Anti-Cav Check
Fluid Conveying
5.10 3.80 0.25 0.83 3.80
(1) Inlet & Inlet/Outlet Cover: One is required. (2) Main Relief Option: One is required if Inlet/Outlet Cover is used. (3) Spool Section: One or more is required. (4) Work Port Option: Two are required for each Spool Section that has Auxiliary Valve Porting. (5) End Mechanism Option: Optional. (6) Lever Kit: One is required for each manually operated spool section. (7) Outlet Cover: One is required. (8) Outlet Cover Option: A Shut-Off Plug is required for power beyond or closed center capability when Universal Outlet Cover is used. (9) Tie Rod Kit: One is required. The Inlet & Outlet covers are NOT included in counting the number of sections for a tie rod kit. Final torque the two 1/2" nuts to 14 ft-lb; Final torque the 9/16" nut to 33 ft-lb.
220

Features: Simple, compact and heavy duty designed sectional valve from 1 to 12 sections, for open and closed center hydraulic systems Main pressure relief valve Load check valve on every work section Available with parallel, tandem or series circuit Optional power beyond port Available with manual, pneumatic, hydraulic, electro-hydraulic, solenoid or cable controls Interchangeable spools. Nominal Flow Rating: 21 GPM. Maximum Operating Pressure: 4600 PSI. Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.18 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 548
Fluid Conveying

C1HV16 613205001 C1HT16 3XCAR110213
Inlet cover (FE-SD8/AC(YG3)-SAE) with direct pressure relief (3) 900-2900 PSI range (1) and standard setting 1750 PSI, with blanking plug (4). SAE-10 end inlet port P and plugged SAE-10 top inlet. (3) Direct pressure relief (Type YG3-175), 1800-3600 PSI range, standard setting 2500 PSI.
221


C1HV13 613105001
Working section (EL-SD8/P-18L-SAE), parallel circuit, 4way 3pos A&B closed in (1) neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-8 work ports. Does NOT include M10 thread handlever. Working section (EL-SD8/P-28L-SAE), parallel circuit, 4way 3-pos A & B open to tank (1) in neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-8 work ports. Does NOT include M10 thread handlever. (3) "A" side spool positioner (Type 11), with detent in positions 1, neutral and 2 "A" side spool positioner (Type 8ED3), On/Off electro-hydraulic, 12VDC (Requires 2ea (3) solenoid connectors, 1ea Electro-Hydraulic Feeder Kit and Back Pressure Valve) "B" side option (Type L), standard lever box, M10 thread (does NOT include M10 (4) thread handlever) Handlever (Type AL01/M10x200), for standard leverbox, M10 thread x 200mm long, (II) with black knob (II) Handlever (Type AL01/M12x250), for mechanical joystick, M12 thread x 250mm long, with black knob
C1HV14 613105301 C1HU84 5V11108000 C1HU74 5V08108360
6.97 0.50 3.82 0.43 0.28 0.50
C1HT94 5LEV108000 C1HQ47 170012020 C1HQ59 170013025
222


C1HT29 4TAP318010
(3) M18 x 1.5 plug for power beyond / closed center option


C1HV17 613305001 C1HT29 4TAP318010
(1) Outlet cover (FS-SD8/RC-SAE), SAE-10 end outlet port T, plugged SAE-10 top outlet, machined for optional power beyond/closed center conversion (3) M18 x 1.5 plug for power beyond / closed center option

223

Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. 0.53 0.66 0.82 0.96 1.12 1.26 0.76 Price Each
C1HU16 5TIR108128 C1HU18 5TIR108169 C1HU21 5TIR108210 C1HU24 5TIR108251 C1HU27 5TIR108292 C1HU30 5TIR108333 C1HU11 5STA125190
(1) Tie rod kit for a 1-section valve assembly (1) Tie rod kit for a 2-section valve assembly (1) Tie rod kit for a 3-section valve assembly (1) Tie rod kit for a 4-section valve assembly (1) Tie rod kit for a 5-section valve assembly (1) Tie rod kit for a 6-section valve assembly (2) Brackets kit
224

Directional Valves, Sectional Open & Closed Center Walvoil SDS150 Series Flows to 24 GPM (Nominal) Pressures to 4600 PSI
Sectional Control Valves for Open & Closed Center Systems Walvoil SDS150 Series
Features: Simple, compact and heavy duty designed sectional valve from 1 to 12 sections, for open and closed center hydraulic systems Main pressure relief valve Load check valve on every work section Available with parallel, tandem or series circuit Optional power beyond port Available with manual, pneumatic, hydraulic, electro-hydraulic or cable controls Interchangeable spools. Nominal Flow Rating: 24 GPM. Maximum Operating Pressure: 4600 PSI (Parallel or Tandem circuit). 3050 PSI (Series circuit). Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.18 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 552
Fluid Conveying
SDS150 Inlet Covers & Options
SDS150 Inlet Covers & Options

Catalog Part No. C1HV21 Walvoil Model 614266002 Key Description & (Walvoil Type Code) Wt. 7.27 0.63 Price Each
Inlet cover (FE-SDS150/AC(YG3)-SAE) with direct pressure relief (3): 1800-2900 PSI (1) range and standard setting 1750 PSI, with blanking plug (4). SAE-12 end inlet port P and plugged SAE-12 top inlet. Direct pressure relief (Type YG3-175), 1800-3600 PSI range, standard setting 2500 (3) PSI.
C1HT16 3XCAR110213
225

SDS150 Working Sections & Options
SDS150 Working Sections & Options

Catalog Part No. C1HV19 Walvoil Model 614166001 Key Description & (Walvoil Type Code) Wt. 10.05 Price Each
Working section (EL-SDS150/P-18L-SAE), parallel circuit, 4way 3-pos A&B closed in (1) neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-10 work ports. Does NOT include M10 thread handlever.
C1HV20 C1JR83 C1JC50
614166302 5V08110320 5V08110701
Working section (EL-SDS150/P-28L-SAE), parallel circuit, 4way 3-pos A&B open to (1) tank in neutral, complete with spring centering positioner (3), standard lever box (4) and 10.02 blanking plugs (5). SAE-10 work ports. Does NOT include M10 thread handlever. "A" side spool positioner (Type 8EI3), On/Off electro-hydraulic, 12VDC (Requires 2ea (3) solenoid connectors, 1ea Electro-Hydraulic Feeder Kit and Back Pressure Valve) (3) "A" side spool positioner (Type 8P), On/Off pneumatic, NPT "B" side option (Type L), standard lever box, M10 thread (does NOT include M10 (4) thread handlever) (II) Handlever (Type AL01/M10x200), for standard leverbox, M10 thread x 200mm long, with black knob (II) Handlever (Type AL01/M12x250), for mechanical joystick, M12 thread x 250mm long, with black knob 4.50 1.41 0.49 0.28 0.50
C1HT95 5LEV110000 C1HQ47 170012020 C1HQ59 170013025
226

SDS150 Electro-Hydraulic Feeder Kits & Options
SDS150 Electro-Hydraulic Feeder Kits & Options

Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. 0.03 Price Each C1HT29 4TAP318010 (3) M18 x 1.5 plug for power beyond / closed center option
Fluid Conveying
SDS150 Outlet Cover & Options
SDS150 Outlet Cover & Options

Outlet cover (Type FS-SDS150/RC-SAE), SAE-12 end outlet port T, plugged SAE-12 (1) top outlet, machined for optional power beyond/closed center conversion (3) M18 x 1.5 plug for power beyond / closed center option
C1HT29 4TAP318010
227

SDS150 Tie Rod & Mounting Bracket Kits
SDS150 Tie Rod & Mounting Bracket Kits

Catalog Part No. C1HU38 C1HU41 C1HU54 Walvoil Model 5TIR110149 5TIR110194 5TIR110374 Key Description & (Walvoil Type Code) Wt. 0.23 1.34 2.33 0.76 Price Each
(1) Tie rod kit for a 1-section valve assembly (1) Tie rod kit for a 2-section valve assembly (1) Tie rod kit for a 6-section valve assembly (2) Brackets kit
C1HU11 5STA125190
228

Sectional Control Valves for Open & Closed Center Systems Husco Model 6000
Features: Low effort spools Zero leak spool seals Open center or closed center operation Hard chrome plated spools Load check in each section Single low pressure o-ring sealing between sections Precision metering. Options: High pressure carryover (Power Beyond) Lock-out spool section (Built-in pilot operated check valve section) Mid-inlet flow combiner or separator Left-hand spool sections Parallel, Conventional and Series circuitry End mechanisms: Spring centered, Detent, 4th position float, Hydraulic pilot operated, Automatic kick-out, Magnetic detent Auxiliary valves: Pilot-operated, anti-cavitation check combination relief cartridges, Anti-cavitation cartridges Regenerative spools Specialized spools. Maximum Operating Pressure: 3400 PSI. Maximum Outlet Port/Tank Core Pressure: 250 PSI. Seals: Buna-N standard, Viton optional. Parallel Circuits: In a Parallel Circuit valve assembly, two or more spools may be actuated at the same time and the oil will follow the path of least resistance. If the loads are different and the spools are fully shifted, the lightest load will operate first. If the spools are not fully shifted and the oil is metered, it is possible to direct partial flow to both loads. Power Beyond & Closed Center Options: Valve assemblies can be made Power Beyond or Closed Center by selecting and configuring the appropriate Outlet Cover. Dimensions & Technical Information: page 531
Fluid Conveying
229


Catalog Part No. C1JP55 C1JP55 C1JL48 C1JP55 Husco Model N51055-22/2000/5 N51055-22/2000/5 N6105-A N51055-22/2000/5 Key Description Wt. 1.50 1.50 2.01 Price Each
Pilot-Operated Main Relief Valve, 700-6000 PSI Adjustment Range, Set at 2000 PSI @ (2) 5 GPM (4) Work Port Relief Valve, Pilot-Operated, 700-6000 PSI Adjustment Range, Set at 2000 PSI @ 5 GPM (6) Heavy Duty Lever Kit (8) Pilot-Operated Power Beyond Relief Valve, 700-6000 PSI Adjustment Range, Set at 2000 PSI @ 5 GPM
Fluid Conveying
1.50
(1) Inlet & Inlet/Outlet Cover: One is required. (2) Main Relief Option: One is required if Inlet/Outlet Cover is used. (3) Spool Section: One or more is required. (4) Work Port Option: Two are required for each Spool Section that has Auxiliary Valve Porting. (5) End Mechanism Option: Optional. (6) Lever Kit: One is required for each manually operated spool section. (7) Outlet Cover: One is required. (8) Outlet Cover Option: A Shut-Off Plug is required for power beyond or closed center capability when Universal Outlet Cover is used. (9) Tie Rod Kit: One is required. The Inlet & Outlet covers are NOT included in counting the number of sections for a tie rod kit. Final torque the two 11/16" nuts to 48 5 ft-lb; Final torque the 3/4" nut to 74 8 ft-lb.
230

Features: Simple, compact and heavy duty designed sectional valve from 1 to 12 sections, for open and closed center hydraulic systems Main pressure relief valve Load check valve on every work section Available with parallel, tandem or series circuit Optional power beyond port Available with manual, pneumatic, hydraulic, electro-hydraulic or cable controls Interchangeable spools. Nominal Flow Rating: 37 GPM. Maximum Operating Pressure: 4600 PSI (Parallel or Tandem circuit). 3050 PSI (Series circuit). Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.18 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 550
Fluid Conveying

Catalog Part No. C1KK62 Walvoil Model 618205004 Key Description & (Walvoil Type Code) Wt. 9.30 Price Each
Inlet cover (FE SD16/AC(XG-120)F-SAE) with pilot-operated pressure relief (3) (1) 360-4600 PSI range and standard setting 1750 PSI, with anit-cavitation plug (4). SAE-16 side inlet port P and plugged SAE-16 top inlet.
231

C1KK61 618205001 C1HV70 XGIU641250
Inlet cover (FE-SD16/AD(YG3)-SAE) with direct pressure relief (3) 1800-3600 PSI (1) range and standard setting 2500 PSI, with blanking plug (4). SAE-16 top inlet port P and plugged SAE-16 end inlet. (2) Inlet port option, gauge port plug, SAE-16 x 1/4-19 BSPP


Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. 12.43 Price Each Working section (EL-SD16/P-18L-SAE), parallel circuit, 4way 3pos A&B closed in (1) neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-12 work ports. Does NOT include M10 thread handlever. Working section (EL-SD16/P-28L-SAE), parallel circuit, 4way 3-pos A&B open to tank (1) in neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-12 work ports. Does NOT include M10 thread handlever. (3) "A" side spool positioner (Type 8P), On/Off pneumatic, NPT (4) "B" side option (Type L), standard lever box, M10 thread (does NOT include M10 thread handlever) relief option (Type U(G3-100)), anti-shock & anti-cavitation valve, 1450-3600 PSI (5) Port range, standard setting 1450 PSI Handlever (Type AL01/M10x200), for standard leverbox, M10 thread x 200mm long, (II) with black knob Handlever (Type AL01/M12x250), for mechanical joystick, M12 thread x 250mm long, (II) with black knob
C1KK60 618105004
C1KK59 618101006 C1JC50 5V08110701
12.43 1.41 0.49 0.40 0.28 0.50
C1HT95 5LEV110000 C1KN76 X011411100
C1HQ47 170012020 C1HQ59 170013025
232


C1KF76 618305003 C1HT29 4TAP318010
Outlet cover (FS-SD16/RC-SAE), SAE-16 end outlet port T, plugged SAE-16 top outlet, (1) machined for optional power beyond/closed center conversion (3) M18 x 1.5 plug for power beyond / closed center option


Catalog Part No. Walvoil Model Key Description & (Walvoil Type Code) Wt. 1.21 1.47 1.73 2.01 2.59 2.79 3.32 1.20 Price Each
C1HU39 5TIR110170 C1HU43 5TIR110218 C1HU46 5TIR110266 C1HU49 5TIR110316 C1HU56 5TIR110410 C1HU58 C1JR82 C1HU12 5TIR110458 5TIR110554 5STA125220
(1) Tie rod kit for a 1-section valve assembly (1) Tie rod kit for a 2-section valve assembly (1) Tie rod kit for a 3-section valve assembly (1) Tie rod kit for a 4-section valve assembly (1) Tie rod kit for a 6-section valve assembly (1) Tie rod kit for a 7-section valve assembly (1) Tie rod kit for a 9-section valve assembly (2) Brackets kit
233

Features: Simple, compact and heavy duty designed sectional valve from 1 to 12 sections, for open and closed center hydraulic systems Main pressure relief valve Load check valve on every work section Available with parallel or series circuit Optional power beyond port Available with manual, pneumatic, hydraulic, electro-hydraulic or cable controls Interchangeable spools. Nominal Flow Rating: 63 GPM. Maximum Operating Pressure: 4600 PSI (Parallel circuit). 3050 PSI (Series circuit). Maximum Back Pressure: 360 PSI on outlet port T. Internal Leakage A(B) to T: 0.24 in/min at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F with standard Buna-N seals. Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Dimensions & Technical Information: page 551
234


Catalog Part No. C1HV36 Walvoil Model 617205009 Key Description & (Walvoil Type Code) Wt. Price Each
Fluid Conveying
Inlet cover (FE-SD25/AC(XG3)-SAE) with pilot-operated pressure relief (3) 360-4600 (1) PSI range and standard setting 1750 PSI, with blanking plug (4). SAE-20 end inlet port 18.93 P and plugged SAE-20 top inlet.
235


Working section (EL-SD25/P-18L-SAE), parallel circuit, 4way 3-pos A&B closed in (1) neutral, complete with spring centering positioner (3), standard lever box (4) and blanking plugs (5). SAE-16 work ports. Does NOT include M12 thread handlever. (II) Handlever (Type AL01/M12x250), for mechanical joystick, M12 thread x 250mm long, with black knob
C1HQ59 170013025
236


Catalog Part No. C1HV37 Walvoil Model 617305002 Key Description & (Walvoil Type Code) Wt. Price Each
cover (FS-SD25/RC-SAE), SAE-20 end outlet port T, plugged SAE-20 top outlet, 15.50 (1) Outlet machined for optional power beyond/closed center conversion
Fluid Conveying

Catalog Part No. C1HU61 C1HU62 C1HU13 Walvoil Model 5TIR112234 5TIR112296 5STA130270 Key Description & (Walvoil Type Code) Wt. 2.16 2.63 1.76 Price Each
(1) Tie rod kit for a 1-section valve assembly (1) Tie rod kit for a 2-section valve assembly (2) Brackets kit
237

Directional Valves, Solenoid Operated Screw-In Cartridge Type
2-way, 2-position, Normally Closed Solenoid Valves Vickers SV4-10-C Series To 6 GPM & 3000 PSI
Description: The SV4-10-C is a 2-way, 2-position, direct acting, spool-type, normally closed screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, flow is blocked in both directions. In the energized position, the spool lifts to allow flow in either direction. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 6 GPM. Internal Leakage: 5 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV4-10-C*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Closed Solenoid Valves Vickers SV4-10-C Series To 6 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Vickers Model SV4-10-C-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.29 Price Each
C1BT22 565537
Parts for Vickers SV4-10-C Solenoid Valve Cartridges

Catalog Part No. C1FK22 Part Number 565806 SK2-10-2 Buna-N Seal Kit Description Wt. 0.01 Price Each
238

Description: The SV5-8-C is a 2-way, 2-position, poppet type, pilot operated, normally closed screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. This valve is used in applications requiring low leakage. Operation: In the de-energized position, the SV5-8-C blocks flow from port 2 to port 1, and free flow is allowed from port 1 to port 2. In the energized position, flow from port 1 to port 2 is restricted and free flow is allowed from port 2 to port 1. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 6 GPM. Internal Leakage: Less than 5 drops per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV5-8-C*, sold separately. Housing: Cavity size C-8-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "S" Series 16 Watt, sold separately, see page 332 2-way, 2-position, Normally Closed Solenoid Valves Vickers SV5-8-C Series To 6 GPM & 3000 PSI
Catalog Part No. C1ZZ82 Vickers Part No. 02-160759 Vickers Model SV5-8-C-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.22 Price Each
Fluid Conveying
239

Description: The SV3-10-C is a 2-way, 2-position, pilot operated, poppet-type, normally closed screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, flow is blocked from port 2 to port 1 and free flow is allowed from port 1 to port 2. In the energized position, the poppet lifts to allow flow in either direction. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 12 GPM. Internal Leakage: Less than 5 drops per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV3-10-C*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Closed Solenoid Valves Vickers SV3-10-C Series To 12 GPM & 3000 PSI
C1BT21 565536
240

Description: The SV1-10-C is a 2-way, 2-position, pilot operated, poppet-type, normally closed screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, flow is blocked from port 2 to port 1 and free flow is allowed from port 1 to port 2. In the energized position, flow from port 1 to port 2 is restricted while free flow is allowed from port 2 to port 1. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 12 GPM. Internal Leakage: Port 2 to Port 1: 5 drops per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV1-10-C*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Closed Solenoid Valves Vickers SV1-10-C Series To 12 GPM & 3000 PSI
Fluid Conveying
C1BT20 565534
241

2-way, 2-position, Normally Closed Solenoid Valves Vickers SBV11-10-C Series To 20 GPM & 5000 PSI
Description: The SBV11-10-C is a 2-way, 2-position, bi-directional, pilot operated, poppet-type, normally closed screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, flow is blocked in both directions. In the energized position, flow is allowed in both directions. Pressure Rating (All Ports): 5000 PSI. (CAUTION: Pressures over 3000 PSI require steel housing or manifold). Rated Flow: 20 GPM. Internal Leakage: 5 drops per minute maximum @ 5000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 212F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SBV11-10-C*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "H" Series 26 Watt, sold separately, see page 332 2-way, 2-position, Normally Closed Solenoid Valves Vickers SBV11-10-C Series To 20 GPM & 5000 PSI
Catalog Part No. C1HY32 Vickers Part No. 02-177580 Vickers Model SBV11-10-C-0-00 Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.39 Price Each
242

Fluid Conveying
Description: The SV1-16-C is a 2-way, 2-position, pilot operated, poppet-type, normally closed screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, flow is blocked from port 2 to port 1 and free flow is allowed from port 1 to port 2. In the energized position, bi-directional flow is allowed between port 1 and port 2. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 35 GPM. Internal Leakage: Port 2 to Port 1: 5 drops per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV1-16-C*, sold separately. Housing: Cavity size C-16-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Closed Solenoid Valves Vickers SV1-16-C Series To 35 GPM & 3000 PSI
C1BT23 565538
243

Description: The SV2-20-C is a 2-way, 2-position, pilot operated, poppet-type, normally closed screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, flow is blocked from port 2 to port 1 and free flow is allowed from port 1 to port 2. In the energized position, free flow is allowed between both ports. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 60 GPM. Internal Leakage: Port 2 to Port 1: Less than 5 drops per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV2-20-C*, sold separately. Housing: Cavity size C-20-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Closed Solenoid Valves Vickers SV2-20-C Series To 60 GPM & 3000 PSI
Catalog Part No. C1FA73 Vickers Part No. 565539 Vickers Model SV2-20-C-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 1.16 Price Each
244

2-way, 2-position, Normally Open Solenoid Valves Vickers SV4-10-O Series To 6 GPM & 3000 PSI
Description: The SV4-10-O is a 2-way, 2-position, spool-type, direct acting, normally open screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows bi-directional flow between port 1 and port 2. In the energized position both ports are closed. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 6 GPM. Internal Leakage: Port 2 to Port 1: 5 in per minute maximum @ 3000 PSI with valve energized. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV4-10-O*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Open Solenoid Valves Vickers SV4-10-O Series To 6 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Vickers Model SV4-10-O-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.30 Price Each C1BT25 565542
Fluid Conveying
Parts for Vickers SV4-10-O Solenoid Valve Cartridges

245

Description: The SV5-8-O is a 2-way, 2-position, poppet-type, pilot operated, normally open screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. This valve is used in applications requiring low leakage. Operation: In the de-energized position, this valve allows free flow from port 2 to port 1, and restricted flow from port 1 to port 2. In the energized position, flow is blocked from port 2 to port 1, and free flow is allowed from port 1 to port 2. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 6 GPM. Internal Leakage: Less than 5 drops per minute maximum @ 3000 PSI with valve energized. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV5-8-O*, sold separately. Housing: Cavity size C-8-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "S" Series 16 Watt, sold separately, see page 332 2-way, 2-position, Normally Open Solenoid Valves Vickers SV5-8-O Series To 6 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Vickers Model SV5-8-0-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.29 Price Each
C1AD17 02-160761
246

Fluid Conveying
Description: The SV3-10-O is a 2-way, 2-position, poppet-type, pilot operated, normally open screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. This valve is used in applications requiring low leakage. Operation: In the de-energized position, this valve allows bi-directional flow between port 1 and port 2. In the energized position, flow is blocked from port 2 to port 1, and is allowed from port 1 to port 2 when spring force is overcome. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 12 GPM. Internal Leakage: Port 2 to Port 1: Less than 5 drops per minute maximum @ 3000 PSI with valve energized. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV3-10-O*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold seperately, see page 332 2-way, 2-position, Normally Open Solenoid Valves Vickers SV3-10-O Series To 12 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Manual Override Option No Seal Material Buna-N Price Each
Vickers Model SV3-10-O-0-00
Housing None
Coil (1 Required) None
Wt. 0.37
C1BT24 565541
247

2-way, 2-position, Normally Open Solenoid Valves Vickers SBV11-10-O Series To 20 GPM & 5000 PSI
Description: The SBV11-10-O is a 2-way, 2-position, bi-directional, pilot operated, poppet-type, normally open screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, flow is allowed in both directions. In the energized position, flow is blocked in both directions. Pressure Rating (All Ports): 5000 PSI. (CAUTION: Pressures over 3000 PSI require steel housing or manifold). Rated Flow: 20 GPM. Internal Leakage: Port 1 to Port 2, or Port 2 to Port 1: 5 drops per minute maximum @ 5000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 212F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SBV11-10-O*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "H" Series 26 Watt, sold separately, see page 332 2-way, 2-position, Normally Open Solenoid Valves Vickers SBV11-10-O Series To 20 GPM & 5000 PSI
Catalog Part No. C1HY31 Vickers Part No. 02-177579 Vickers Model SBV11-10-0-0-00 Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.39 Price Each
248

Description: The SV3-12-O is a 2-way, 2-position, poppet-type, pilot operated, normally open screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows bi-directional flow between port 1 and port 2. In the energized position, flow is blocked from port 2 to port 1, and is allowed from port 1 to port 2 when spring force is overcome. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 30 GPM. Internal Leakage: Port 2 to Port 1: Less than 5 drops per minute maximum @ 3000 PSI with valve energized. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 17/15/12 or cleaner. Cartridge: Model SV3-12-O*, sold separately. Housing: Cavity size C-12-2 or C-12-2U, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Open Solenoid Valves Vickers SV3-12-O Series To 30 GPM & 3000 PSI
Catalog Part No. C1FQ44 Vickers Part No. 02-161311 Vickers Model SV3-12-O-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.58 Price Each
Fluid Conveying
249

Description: The SV3-16-O is a 2-way, 2-position, poppet-type, pilot operated, normally open screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows bi-directional flow between port 1 and port 2. In the energized position, flow is blocked from port 2 to port 1, and is allowed from port 1 to port 2 when spring force is overcome. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 35 GPM. Internal Leakage: Port 2 to Port 1: Less than 5 drops per minute maximum @ 3000 PSI with valve energized. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV3-16-O*, sold separately. Housing: Cavity size C-16-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Open Solenoid Valves Vickers SV3-16-O Series To 35 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Vickers Model SV3-16-O-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.74 Price Each
C1BT26 565544
250

Fluid Conveying
Description: The SV3-20-O is a 2-way, 2-position, poppet-type, pilot operated, normally open screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows bi-directional flow between port 1 and port 2. In the energized position, flow is blocked from port 2 to port 1, and is allowed from port 1 to port 2 when spring force is overcome. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 60 GPM. Internal Leakage: Port 2 to Port 1: Less than 5 drops per minute maximum @ 3000 PSI with valve energized. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV3-20-O*, sold separately. Housing: Cavity size C-20-2, sold separately, see page 329 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 2-way, 2-position, Normally Open Solenoid Valves Vickers SV3-20-O Series To 60 GPM & 3000 PSI
Catalog Part No. C1BT27 Vickers Part No. 565545 Vickers Model SV3-20-O-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 1.25 Price Each
251

3-way, 2-position Solenoid Valves Vickers SV1-8-3 Series To 3 GPM & 3000 PSI
Description: The SV1-8-3 is a 3-way, 2-position, spool-type, direct acting screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. This valve can be used in applications requiring separate pressure and tank lines, such as a single acting cylinder. Operation: In the de-energized position, this valve allows flow from port 2 to port 1 while port 3 is blocked. In the energized position, flow is allowed from port 1 to port 3 while port 2 is blocked. Pressure Rating: 3000 PSI all ports. Rated Flow: 3 GPM. Internal Leakage: 5 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV1-8-3*, sold separately. Housing: Cavity size C-8-3, sold separately, see page 330 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Seal Kit: 02-160755 (Buna-N), 02-160756 (Viton). Coil: "S" Series 16 Watt, sold separately, see page 332 3-way, 2-position Solenoid Valves Vickers SV1-8-3 Series To 3 GPM & 3000 PSI
Catalog Part No. C1HL36 Vickers Part No. 02-160771 Vickers Model SV1-8-3-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.24 Price Each
252

Description: The SV4-8-3 is a 3-way, 2-position, spool-type, direct acting screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows flow from port 2 to port 1 while port 3 is blocked. In the energized position, flow is allowed from port 2 to port 3 while port 1 is blocked. Pressure on port 1 should not exceed 300 PSI. Pressure Rating: 3000 PSI port 2 and port 3. 300 PSI port 1. Rated Flow: 4 GPM. Internal Leakage: 5 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV4-8-3*, sold separately. Housing: Cavity size C-8-3, sold separately, see page 330 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "S" Series 16 Watt, sold separately, see page 332 3-way, 2-position Solenoid Valves Vickers SV4-8-3 Series To 4 GPM & 3000 PSI
Catalog Part No. C1FV36 Vickers Part No. 02-198050 Vickers Model SV4-8-3-0-24BNS Manual Override Option No Housing None Coil (1 Required) Seal Material Wt. 0.74 Price Each
Fluid Conveying
24VDC with Deutsch connector and with Buna-N arc suppression diode
253

Description: The SV4-10-3 is a 3-way, 2-position, spool-type, direct acting screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows flow from port 1 to port 2 while port 3 is blocked. In the energized position, flow is allowed from port 2 to port 3 while port 1 is blocked. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 6 GPM. Internal Leakage: 10 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV4-10-3*, sold separately. Housing: Cavity size C-10-3, sold separately, see page 330 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 3-way, 2-position Solenoid Valves Vickers SV4-10-3 Series To 6 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Vickers Model SV4-10-3-0-00 Manual Override Option No Housing None Coil (1 Required) None Seal Material Buna-N Wt. 0.40 Price Each C1BT60 566307
254

Description: The SV1-10-3 is a 3-way, 2-position, spool-type, direct acting screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows flow from port 2 to port 1 while port 3 is blocked. In the energized position, flow is allowed from port 1 to port 3 while port 2 is blocked. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 6 GPM. Internal Leakage: 10 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV1-10-3*, sold separately. Housing: Cavity size C-10-3, sold separately, see page 330 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 3-way, 2-position Solenoid Valves Vickers SV1-10-3 Series To 6 GPM & 3000 PSI
Fluid Conveying
C1BT28 565546
255

Description: The SV1-10-4 is a 4-way, 2-position, spool-type, direct acting screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: In the de-energized position, this valve allows flow from port 2 to port 3 and from port 4 to port 1. In the energized position, flow is allowed from port 3 to port 4 and from port 2 to port 1. Pressure Rating (All Ports): 3000 PSI. Rated Flow: 6 GPM. Internal Leakage: 10 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV1-10-4*, sold separately. Housing: Cavity size C-10-4, sold separately, see page 331 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coil: "J" Series 20 Watt, sold separately, see page 332 4-way, 2-position Solenoid Valves Vickers SV1-10-4 Series To 6 GPM & 3000 PSI
C1BT29 565547
256

4-way, 3-position Solenoid Valves Vickers SV9-8 Series To 3.5 GPM & 3000 PSI
Fluid Conveying
Description: The SV9-10 is a 4-way, 3-position, spool-type, direct acting screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: Closed Center Valves: In the de-energized position, all ports are blocked. When solenoid 1 is energized, flow is directed from port 3 to port 2 and from port 4 to port 1. When solenoid 2 is energized, flow is directed from port 3 to port 4 and from port 2 to port 1. Tandem Center Valves: In the de-energized position, this valve allows flow from 3 to port 1 and blocks ports 2 and 4. When solenoid 1 is energized, flow is directed from port 3 to port 2 and from port 4 to port 1. When solenoid 2 is energized, flow is directed from port 3 to port 4 and from port 2 to port 1. Pressure Rating (All Ports): 3000 PSI. Rated Flow: Tandem Center models 3 GPM, Others 3.5 GPM. Internal Leakage: 10 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV9-8*, sold separately. Housing: Cavity size C-8-4, sold separately. Aluminum NFPA fatigue rated models: 02-160749 SAE-6 Ports, 02-160750 SAE-8 Ports. See page 331 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coils: "P" Series 20 Watt, sold separately, see page 332
257

4-way, 3-position Solenoid Valves Vickers SV9-8 Series To 3.5 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Vickers Model VICK SV98NF00000000000000 Circuit Type P Blocked, A&B Open Housing None Seal Coils (2 Required) Material None Buna-N Wt. 0.50 Price Each
C1HW91 02-198685
Note: (1ea) 02-186730 Spacer is REQUIRED to assemble a valve. (Select from table below).
Parts for Vickers SV9-8 Solenoid Valve Cartridges

Catalog Part No. Part Number Description Spacer (To be inserted between the coils - REQUIRED) Wt. 0.06 Price Each
C1HW46 02-186730
258

4-way, 3-position Solenoid Valves Vickers SV9-10 Series To 6 GPM & 3000 PSI
Fluid Conveying
Description: The SV9-10 is a 4-way, 3-position, spool-type, direct acting screw-in cartridge solenoid valve, and requires a machined cavity or housing for installation. Operation: Closed Center Valves: In the de-energized position, all ports are blocked. When solenoid 1 is energized, flow is directed from port 3 to port 2 and from port 4 to port 1. When solenoid 2 is energized, flow is directed from port 3 to port 4 and from port 2 to port 1. Tandem Center Valves: In the de-energized position, this valve allows flow from 3 to port 1 and blocks ports 2 and 4. When solenoid 1 is energized, flow is directed from port 3 to port 2 and from port 4 to port 1. When solenoid 2 is energized, flow is directed from port 3 to port 4 and from port 2 to port 1. Pressure Rating (All Ports): 3000 PSI. Rated Flow: Tandem Center models 5 GPM, Others 6 GPM. Internal Leakage: 15 in per minute maximum @ 3000 PSI. Note: Performance data is typical with fluid at 105 SSU and 120F. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model SV9-10*, sold separately. Housing: Cavity size C-10-4, sold separately, see page 331 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Coils: "J" Series 20 Watt, sold separately, see page 332 4-way, 3-position Solenoid Valves Vickers SV9-10 Series To 6 GPM & 3000 PSI
Catalog Part No. Vickers Part No. Vickers Model SV910NA00000000000000A Circuit Type Tandem Center Housing None None Coils (2 Required) None None Seal Material Buna-N Buna-N Wt. 0.53 0.53 Price Each
C1KY86 02-199325 C1KX60 02-199329
P Blocked, SV910NF00000000000000A A&B Open to Tank
Note: (1ea) 02-179226 Spacer is REQUIRED to assemble a valve (Select from table below).
259

Parts for Vickers SV9-10 Solenoid Valve Cartridges
Catalog Part No. Part Number Description Spacer (To be inserted between the coils - REQUIRED) Wt. 0.06 Price Each
C1AD39 02-179226
260

Directional Valves, Solenoid Operated NFPA Size D03 ISO 4401 Size 03 Vickers DG4V-3 & DG4V-3S Series
Vickers DG4V-3S (Standard Performance) Flows to 10.5 GPM DG4V-3 (High Performance) Flows to 21 GPM
Features: High reliability. High pressure & flow capability. Low pressure drops. Viton seals. Scratch-proof manual override. Coil change with valve in place. ISO 4401 Size 03, NFPA D03 port interface. Maximum Operating Pressure: 5075 psi. (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). (See tables for port T pressure rating). Maximum Flow Rates: Dependent on spool/spring combination and coil. Operating Fluid Temperature Range: -4F to 158F (Mineral oil), +50F to 129F (water based fluids). Ambient Temperature Range: DG4V-3S: 4F to 149F (Dual freq. Coil @110% voltage). DG4V-3: -4F to 122F (Dual freq. coil @107% voltage), -4F to 104F (Dual freq. coil @ 110% voltage). Mounting Considerations: Detented models should mount with longitudinal axis horizontal. Other models may be mounted in any position. Service Parts: page 265 Technical Information: page 533 Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Size D03 Subplates & Manifolds: page 336 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 4ea 10-24 x 1-1/4 Grade 8 socket head capscrews (Vickers Bolt Kit 590716), torqued to 44-62 lb.in. with threads lubricated. See Bolt Kits on page 328
Fluid Conveying
4-way, 3-position, Spring Centered Spool / Spring Code 2C

Transient conditions during shift: P to A: All blocked. P to B: All blocked. Maximum Flow Rates @ 3000 PSI: Standard Performance: AC Coils 10 GPM, DC Coils 8 GPM. High Performance: AC Coils 16 GPM, DC Coils 21 GPM. 4-way, 3-position, Spring Centered Spool / Spring Code 2C
Catalog Part No. C1AC46 Vickers Part No. 02-109686 Vickers Model DG4V-3S-2C-M-U-B5-60 DG4V-3S-2C-M-FW-B5-60 DG4V-3S-2C-M-U-D5-60 DG4V-3S-2C-M-U-G5-60 DG4V-3S-2C-M-FW-G5-60 DG4V-3S-2C-M-U-H5-60 DG4V-3-2C-M-U-B6-60 DG4V-3-2C-M-U-D6-60 DG4V-3-2C-M-U-H7-60 Type STD STD STD STD STD STD HP HP HP Coil Rating 110VAC50Hz 120VAC60Hz Coil Type DIN 43650 Port T Rating (psi) 1500 1500 1500 1500 1500 1500 3000 3000 3000 Optional Features Wt. 4.25 4.25 4.05 4.70 4.83 4.68 4.13 4.00 4.79 Price Each
C1AC42 02-109575
110VAC50Hz Lead wires 120VAC60Hz Conduit box 220VAC50Hz 240VAC60Hz 12VDC 12VDC 24VDC 110VAC50Hz 120VAC60Hz 220VAC50Hz 240VAC60Hz 24VDC DIN 43650 DIN 43650 Lead wires Conduit box DIN 43650 DIN 43650 DIN 43650 DIN 43650
C1JS96
02-109026
C1AC37 02-109055 C1AC49 02-109826 C1AC31 02-109025 C1KD96 C1KD98 C1BS80 859161 859172 529760
261


Transient conditions during shift: P to A: P & A restricted opening to T, B blocked. P to B: P & B restricted opening to T, A blocked. Maximum Flow Rates @ 3000 PSI: Standard Performance: AC Coils 3 GPM, DC Coils 2.5 GPM. High Performance: AC Coils 9 GPM, DC Coils 12 GPM. 4-way, 3-position, Spring Centered Spool / Spring Code 8C
Catalog Part No. C1AC96 Vickers Part No. 02-145188 Vickers Model DG4V-3S-8C-VM-U-B5-61 DG4V-3S-8C-VM-FW-B5-61 DG4V-3S-8C-VM-U-D5-61 DG4V-3S-8C-VM-U-G5-61 DG4V-3S-8C-VM-FW-G5-61 DG4V-3S-8C-VM-U-H5-61 DG4V-3-8C-VM-U-B6-61 DG4V-3-8C-VM-FW-B6-61 DG4V-3-8C-VM-U-D6-61 Type STD STD STD STD STD STD HP HP HP Coil Rating 110VAC50Hz 120VAC60Hz Coil Type DIN 43650 Port T Rating (psi) 1500 1500 1500 1500 1500 1500 3000 3000 3000 Optional Features Wt. 3.00 4.25 4.05 4.68 5.00 5.00 Price Each
C1AC93 02-145150 C1JP87 02-144939
110VAC50Hz Lead wires 120VAC60Hz Conduit box 220VAC50Hz 240VAC60Hz 12VDC 12VDC 24VDC 110VAC50Hz 120VAC60Hz DIN 43650 DIN 43650 Lead wires Conduit box DIN 43650 DIN 43650
C1AC97 02-145190 C1AC95 02-145182 C1AC98 02-145192 C1JT71 C1AC94 C1JT72 02-144938 02-145158 02-144943
Fluid Conveying
4.11 4.20 4.12
110VAC50Hz Lead wires 120VAC60Hz Conduit box 220VAC50Hz 240VAC60Hz DIN 43650

Transient conditions during shift: P to A: P & A blocked, B open to T. P to B: P & B blocked, A open to T. Maximum Flow Rates @ 3000 PSI: Standard Performance: AC Coils 5 GPM, DC Coils 3.5 GPM. High Performance: AC Coils 5 GPM, DC Coils 9 GPM. 4-way, 3-position, Spring Centered Spool / Spring Code 6C
Catalog Part No. C1AC48 Vickers Part No. 02-109824 Vickers Model DG4V-3S-6C-M-U-B5-60 DG4V-3S-6C-M-FW-B5-60 DG4V-3S-6C-M-U-G5-60 DG4V-3S-6C-M-FW-G5-60 DG4V-3S-6C-M-U-H5-60 DG4V-3-6C-M-U-B6-60 DG4V-3-6C-M-U-D6-60 DG4V-3-6C-M-U-H7-60 Type STD STD STD STD STD HP HP HP Coil Rating 110VAC50Hz 120VAC60Hz Coil Type DIN 43650 Port T Rating (psi) 1500 1500 1500 1500 1500 3000 3000 3000 Optional Features Wt. 4.02 4.25 4.68 4.80 4.75 4.12 4.10 4.87 Price Each
C1AC41 02-109573 C1AC36 02-109048 C1AC43 02-109628 C1AC35 02-109047 C1KD99 C1KE20 C1KB62 859176 859726 565465
110VAC50Hz Lead wires 120VAC60Hz Conduit box 12VDC 12VDC 24VDC 110VAC50Hz 120VAC60Hz 220VAC50Hz 240VAC60Hz 24VDC DIN 43650 Lead wires Conduit box DIN 43650 DIN 43650 DIN 43650 DIN 43650
262


Transient conditions during shift: All open. Maximum Flow Rates @ 3000 PSI: Standard Performance: AC Coils 10.5 GPM, DC Coils 10.5 GPM. High Performance: AC Coils 16 GPM, DC Coils 16 GPM. 4-way, 3-position, Spring Centered Spool / Spring Code 0C
Catalog Part No. C1AC51 Vickers Part No. 02-109940 Vickers Model DG4V-3S-0C-M-U-B5-60 DG4V-3S-0C-M-FW-G5-60 DG4V-3S-0C-Y-M-SP2-G5-60 DG4V-3S-0C-M-FW-H5-60 DG4V-3S-0C-Y-M-SP2-H5-60 Type STD STD STD STD STD Coil Rating 110VAC50Hz 120VAC60Hz 12VDC 12VDC 24VDC 24VDC Coil Type DIN 43650 Lead wires Conduit box Dual 6.3mm spade Lead wires Conduit box Dual 6.3mm spade Port T Rating (psi) 1500 1500 1500 1500 1500 Latching water-resistant manual overrides Latching water-resistant manual overrides Optional Features Wt. 3.00 5.00 4.90 4.79 4.89 Price Each
C1AC47 02-109696 C1GF75 02-354934
C1FE42 02-109693
Fluid Conveying
C1GF89
02-354935
4-way, 2-position, Spring Offset End-to-End Spool / Spring Code 2A

Transient conditions during shift: All blocked. Maximum Flow Rates @ 3000 PSI: Standard Performance: AC Coils 7.5 GPM, DC Coils 7.5 GPM. High Performance: AC Coils 16 GPM, DC Coils 16 GPM. 4-way, 2-position, Spring Offset End-to-End Spool / Spring Code 2A
Catalog Part No. C1AC44 Vickers Part No. 02-109632 Vickers Model DG4V-3S-2A-M-U-B5-60 DG4V-3S-2A-M-FW-B5-60 DG4V-3S-2A-M-U-D5-60 DG4V-3S-2A-M-U-H5-60 DG4V-3-2A-M-U-B6-60 DG4V-3-2A-M-U-H7-60 Type STD STD STD STD HP HP Coil Rating 110VAC50Hz 120VAC60Hz Coil Type DIN 43650 Port T Rating (psi) 1500 1500 1500 1500 3000 3000 Optional Features Wt. 3.19 3.50 3.20 3.75 3.24 3.57 Price Each
C1AC38 02-109563 C1JP80 C1AC32 C1CA43 C1BS81 02-109642 02-109030 859159 529762
110VAC50Hz Lead wires 120VAC60Hz Conduit box 220VAC50Hz 240VAC60Hz 24VDC 110VAC50Hz 120VAC60Hz 24VDC DIN 43650 DIN 43650 DIN 43650 DIN 43650
Left Hand Build Models: Solenoid is on opposite side of valve body. De-Energized state is P to B, A to T.
263


Transient conditions during shift: All open. Maximum Flow Rates @ 3000 PSI: Standard Performance: AC Coils 10.5 GPM, DC Coils 10 GPM. High Performance: AC Coils 16 GPM, DC Coils 16 GPM. 4-way, 2-position, Spring Offset End-to-End Spool / Spring Code 0A
Catalog Part No. C1AC82 Vickers Part No. 02-137934 Vickers Model DG4V-3S-0A-M-U-B5-60 Type STD Coil Rating 110VAC50Hz 120VAC60Hz Coil Type DIN 43650 Port T Rating (psi) 1500 Optional Features Wt. 3.25 Price Each
Miscellaneous Spool / Spring Code Valves
Miscellaneous Spool / Spring Code Valves

Catalog Part No. C1KE43 Vickers Part No. 869777 Spool Spring Code Type 0B HP Max Flow @ Port T 3000 PSI, Rating Optional Coil Type (psi) Features DIN 43650 3000 16 GPM, Left Hand Build Price Each
Vickers Model DG4V-3-0BL-M-U-H7-60
Coil Rating 24VDC
Wt. 3.56
Left Hand Build Models: Solenoid is on opposite side of valve body.
264

Vickers DG4V-3 & DG4V-3S Series Parts
Vickers DG4V-3 & DG4V-3S Series Parts

Catalog Part No. C1BS37 Vickers Model 507833 Description Coil. 110VAC 50HZ, 120VAC 60HZ. HP models with Din 43650 Connector. (Connector is required) Coil. 110VAC 50HZ, 120VAC 60HZ. STD models with Din 43650 Connector. (Connector is required) Coil. 110VAC 50HZ, 120VAC 60HZ. STD models with Lead Wire. Coil. 220VAC 50HZ, 240VAC 60HZ. STD models with Din 43650 Connector. (Connector is required) Coil. 220VAC 50HZ, 240VAC 60HZ. STD models with Lead Wire. Coil. 220VAC 50HZ, 240VAC 60HZ. High Performance models with Din 43650 Connector. (Connector is required) Coil. 12VDC. STD & HP models with Din 43650 Connector. (Connector is required) Coil. 12VDC. STD & HP models with Lead Wire. Coil. 24VDC. STD & HP models with Din 43650 Connector. (Connector is required) Coil. 24VDC. STD & HP models with Lead Wire. Nameplate, blank. Standard Performance Models with Din 43650 Coil. O-Ring, Valve to Mounting Surface, 4 per valve Seal Kit for models with Din 43650 coils. DIN 43650 Solenoid Connector, Strain Relief Style for cable diameter 0.24 to 0.31, not wired, no light DIN 43650 Solenoid Connector, Strain Relief Style for cable diameter 0.31 to 0.41, not wired, light for 6-48 VAC/VDC 50/60 Hz Spool, 6B/6C/6F Wt. 0.63 0.60 0.57 0.60 0.60 0.50 0.88 0.88 0.89 0.87 0.10 0.01 0.10 0.25 0.05 0.07 Price Each
C1AB99 02-101726 C1AC12 02-101731 C1AC11 02-101728 C1AC13 02-101733 C1BS38 507834
Fluid Conveying
C1BS39 507847 C1BS44 508172 C1BS40 507848 C1BS45 508173 C1BY36 694302 C1HH88 262332 C1CA41 858995 C1BS52 5100-10900
C1FK20 5103-1090000 C1ZX22 617119
265

Directional Valves, Solenoid Operated NFPA Size D03 ISO 4401 Size 03 Vickers DG4V-3 Series (Soft Shift, Non-Tuneable Fixed Orifice)
DG4V-3 Soft Shift (High Performance) Flows to 22 GPM Non-Tuneable Fixed Orifice
Features: Low cost alternative to proportional valves. "Non-Tuneable" fixed shift orifices for lower cost. Conventional direct-acting solenoid design with controlled solenoid shift speed. Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Viton seals standard. Operating Principles: Spools with contoured or notched lands are used to provide maximum control of flow rate change as the spool is shifted. DC solenoids prevent coil burnout during controlled rate of solenoid shift. Spool shift speed is controlled by a fixed, non-serviceable metering orifice in the solenoid. P12L Models: Conventional alternating current (120VAC 60HZ or 110VAC 50HZ) input is converted to DC through a rectifier located in the valve's terminal box. Models other than P12L: Rectified DIN connectors can be used to convert AC input voltage to the DC voltage necessary to power the valve. Maximum Operating Pressure: Ports P, A & B 5075 PSI, Port T 3045 PSI, with petroleum oil (1000 PSI with High Water Base fluids). (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Maximum Flow Rates: Dependant on spool/spring combination and coil. Recommended Operating Temperature Range: 20F to 180F. Plumbing Note: To fully utilize the features of the soft shift solenoid, the core tubes must remain full of oil. The tank line must be plumbed so that the tank port is always flooded with oil. Addition of a back pressure check may be required to prevent bleed down. Bleeding Procedure: Apply a minimum of 50 PSI tank pressure. Shift either solenoid. Loosen manual actuators in solenoid ends until air is evacuated. Tighten manual actuators. No further bleeding should be required. Technical Information: page 535 Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Size D03 Subplates & Manifolds: page 336 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 4ea 10-24 x 1-1/4 Grade 8 socket head capscrews (Vickers Bolt Kit 590716), torqued to 44-62 lb.in. maximum with threads lubricated. See Bolt Kits on page 328 Valve Port Restrictor Plugs: Restrictor plugs are available for use in ports P, T, A or B. These can be used for restricting flow or for circuit dampening. Restrictor plugs are not recommended for use above 3000 PSI.

Transient conditions during shift: P to A all blocked. P to B all blocked. Maximum Flow Rates @ 3000 PSI: 22 GPM.

Catalog Part No. Vickers Part No. C1JL59 02-363653 Vickers Model DG4V-3-2C3-M-U-HH7-60 Valve's Electrical Features DIN 43650 Coils Input Electrical Requirements 24VDC Optional Features Wt. 4.98 Price Each
266

Directional Valves, Solenoid Operated NFPA Size D03 ISO 4401 Size 03 Vickers DG4V-3 Series (Soft Shift, Non-Tuneable Fixed Orifice)

Transient conditions during shift: P to A P & A blocked, B open to T. P to B P & B blocked, A open to T. Maximum Flow Rates @ 3000 PSI: 8 GPM.

Catalog Part No. Vickers Part No. C1GE52 02-391668 Vickers Model DG4V-3-6C3-M-U-HH7-60 Valve's Electrical Features DIN 43650 Coils Input Electrical Requirements 24VDC Optional Features Wt. 4.60 Price Each
Fluid Conveying
267

Directional Valves, Solenoid Operated NFPA Size D05 ISO 4401 Size 05 Vickers DG4S4-01 60 Series (Wet Armature)
Vickers DG4S4-01 60 Series (Wet Armature) Flows to 25 GPM

Features: Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Buna-N seals standard (Viton available). Direct Acting type. Maximum Operating Pressure: Ports P, A & B 3600 PSI with petroleum oil, 1000 PSI with High Water Base fluids. (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Port T 1000 PSI. Maximum Flow Rates: Dependant on spool/spring combination and coil. See Technical Information section. Recommended Operating Temperature Range: 70F to 120F. Mounting Considerations: Detented models should mount with longitudinal axis horizontal. Other models may be mounted in any position. Service Parts: page 271 Technical Information: page 536 Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Size D05 Subplates & Manifolds: page 338 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 4ea 1/4-20 x 1-1/2 Grade 8 socket head capscrews (Vickers Bolt Kit 255633), torqued to 112 lb.in. maximum with threads lubricated. See Bolt Kits on page 328

Transient conditions during shift: P to A: All blocked. P to B: All blocked. Maximum Flow Rates @ 3000 PSI: AC Coils 25 GPM, DC Coils 25 GPM.

Catalog Part No. C1JR98 Vickers Part No. 879237 Vickers Model DG4S4-012C-U-B-60 DG4S4-012C-B-60 DG4S4-012C-G-60 DG4S4-012C-U-H-60 Coil Rating 110VAC50Hz 120VAC60Hz 110VAC50Hz 120VAC60Hz 12VDC 24VDC Wiring Coil Type Housing DIN 43650 Lead wires Lead wires DIN 43650 -None None -Optional Features Wt. 10.19 10.12 13.62 13.58 Price Each
C1CA57 879135 C1AC56 02-119593 C1HJ85 879239
268


Transient conditions during shift: P to A: P & A restricted opening to T, B blocked. P to B: P & B restricted opening to T, A blocked. Maximum Flow Rates @ 3000 PSI: AC Coils 12 GPM, DC Coils 5 GPM.

Catalog Part No. C1JP86 Vickers Part No. 02-119859 Vickers Model DG4S4-018C-U-B-60 DG4S4-018C-B-60 DG4S4-018C-U-D-60 DG4S4-018C-G-60 DG4S4-018C-U-H-60 Coil Rating 110VAC50Hz 120VAC60Hz 110VAC50Hz 120VAC60Hz 220VAC50Hz 240VAC60Hz 12VDC 24VDC Wiring Coil Type Housing DIN 43650 Lead wires DIN 43650 Lead wires DIN 43650 -None -None -Optional Features Wt. 10.50 10.11 10.20 13.75 13.50 Price Each
C1CA61 880002 C1JT48 C1EL31 C1JT44 02-127608 02-119489 02-126361
Fluid Conveying

Transient conditions during shift: P to A: P & A blocked, B open to T. P to B: P & B blocked, A open to T. Maximum Flow Rates @ 3000 PSI: AC Coils 20 GPM, DC Coils 20 GPM.

Catalog Part No. C1JT32 C1CA58 C1JT43 C1EL30 Vickers Part No. 02-119475 879159 02-126360 02-119461 Vickers Model DG4S4-016C-U-B-60 DG4S4-016C-B-60 DG4S4-016C-U-D-60 DG4S4-016C-U-H-60 Coil Rating 110VAC50Hz 120VAC60Hz 110VAC50Hz 120VAC60Hz 220VAC50Hz 240VAC60Hz 24VDC Wiring Coil Type Housing DIN 43650 Lead wires DIN 43650 DIN 43650 -None --Optional Features Wt. 10.21 10.16 10.10 13.58 Price Each
269


Transient conditions during shift: Maximum Flow Rates @ 3000 PSI: AC Coils 25 GPM, DC Coils 25 GPM.

Catalog Part No. Vickers Part No. Vickers Model DG4S4-010C-B-60 DG4S4-010C-U-H-60 Coil Rating 110VAC50Hz 120VAC60Hz 24VDC Wiring Coil Type Housing Lead wires DIN 43650 None -Optional Features Wt. 10.10 13.50 Price Each
C1CA59 879242 C1JT40 02-126196
4-way, 2-position, Spring Offset End-to-Center Spool / Spring Code 2B

Transient conditions during shift: Maximum Flow Rates @ 3000 PSI: AC Coils 25 GPM, DC Coils 25 GPM.
Fluid Conveying
4-way, 2-position, Spring Offset End-to-Center Spool / Spring Code 2B

Catalog Part No. C1GH29 Vickers Part No. 02-336791 Vickers Model DG4S4-012B-U-G-60 Coil Rating 12VDC Wiring Coil Type Housing DIN 43650 -Optional Features Wt. 10.03 Price Each

Transient conditions during shift: All blocked. Maximum Flow Rates @ 3000 PSI: AC Coils 20 GPM, DC Coils 20 GPM.

Catalog Part No. C1KE86 Vickers Part No. 879279 Vickers Model DG4S4-012A-U-B-60 DG4S4-012A-B-60 DG4S4WT-012A-B-60 DG4S4-012A-U-D-60 DG4S4-012A-U-H-60 Coil Rating 110VAC50Hz 120VAC60Hz 110VAC50Hz 120VAC60Hz 110VAC50Hz 120VAC60Hz 220VAC50Hz 240VAC60Hz 24VDC Wiring Coil Type Housing DIN 43650 Lead wires Lead wires DIN 43650 DIN 43650 -None Yes --Terminal Strip Optional Features Wt. 8.42 8.42 9.87 83.00 10.66 Price Each
C1CA60 879249 C1HJ86 C1KE87 C1KE40 879260 879280 868978
270

Vickers DG4S4-01 60 Series (Wet Armature) Parts
Vickers DG4S4-01 60 Series (Wet Armature) Parts

Catalog Part No. C1KE81 C1FL31 Vickers Part No. 879143 868983 Description Coil, DIN 43650 Type. 110VAC 50HZ, 120VAC 60HZ. Connector is required. Coil, DIN 43650 Type. 220VAC 50HZ, 240VAC 60HZ. Connector is required. Coil, Lead Wire Type. 110VAC 50HZ, 120VAC 60HZ. Coil, Lead Wire Type. 220VAC 50HZ, 240VAC 60HZ. DIN 43650 Solenoid Connector, Strain Relief Style for cable diameter 0.24 to 0.31, not wired, no light DIN 43650 Solenoid Connector, Strain Relief Style for cable diameter 0.31 to 0.41, not wired, light for 6-48 VAC/VDC 50/60 Hz Wt. 1.24 1.30 1.30 1.30 0.25 0.05 Price Each
C1DZ91 879141 C1CA47 868982
C1BS52 5100-10900 C1FK20 5103-1090000
Fluid Conveying
271

Directional Valves, Solenoid Operated NFPA Size D05 ISO 4401 Size 05 Vickers DG4V4-01 10 Series (Wet Armature, High Pressure)
Vickers DG4V4-01 10 Series (Wet Armature, High Pressure) To 30 GPM

Features: High pressure & flow capability. Plug-in solenoid coils for ease of servicing. Spool cushioning passage equalizes hydraulic force on ends of spool and cushions spool shift. Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Buna-N seals standard (Viton available). Direct Acting type. Maximum Operating Pressure: Ports P, A & B 4570 PSI with petroleum oil, 1000 PSI with High Water Base fluids. (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Port T 1750 PSI with Standard Power coils, 1000 PSI with Low Power Coils. Maximum Flow Rates: Dependant on spool/spring combination and coil. Recommended Operating Temperature Range: 70F to 120F. Mounting Considerations: Detented models should mount with longitudinal axis horizontal. Other models may be mounted in any position. Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Size D05 Subplates & Manifolds: page 338 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 4ea 1/4-20 x 1-1/2 Grade 8 socket head capscrews (Vickers Bolt Kit 255633), torqued to 112 lb.in. maximum with threads lubricated. See Bolt Kits on page 328 Dimensions & Technical Information: page 539

Transient conditions during shift: All blocked. Maximum Flow Rates @ 3000 PSI: Standard AC Coils 30 GPM, Low Powered AC Coils 20 GPM. Standard DC Coils 30 GPM, Low Powered DC Coils 15 GPM (1500 PSI limit). 4-way, 3-position, Spring Centered Spool / Spring Code 2C
Catalog Part No. C1GH30 Vickers Part No. 02-339884 Vickers Model DG4V4-012C-M-U-G-5-10 Coil Rating 12VDC Wiring Coil Type Housing DIN 43650 -Optional Features Std. Power Coils Wt. 13.62 Price Each

Transient conditions during shift: All Open. Maximum Flow Rates @ 3000 PSI: Standard AC Coils 30 GPM, Low Powered AC Coils 20 GPM. Standard DC Coils 30 GPM, Low Powered DC Coils 15 GPM (1500 PSI limit).

Catalog Part No. C1HH49 Vickers Part No. 02-363741 Vickers Model DG4V4-010A-M-W-L-B-5-10 Coil Rating 110VAC50Hz 120VAC60Hz Wiring Coil Type Housing Plug-In Yes Optional Features Std. Power Coil, Lights Wt. 9.61 Price Each
272

Vickers DG4V5 20 Series (Wet Armature, High Pressure) To 32 GPM

Features: Four-land spool design to facilitate smooth, variable valve response speeds AC and DC wet-armature solenoid options with ISO 4400 (DIN 43650) electrical connections and manual overrides Variable speed changeover potential in all DC models Many spool types; in spring-offset, spring-centered and detented arrangements. Maximum Operating Pressure: Ports P, A & B 4500 PSI (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Ports T 1750 PSI for AC solenoids, 2325 PSI for DC solenoids. Maximum Flow Rates: Dependant on spool/spring combination and coil. Fluid Temperature: -4F to 150F Recommended Operating Range, -4F to 158F Extreme Range. Fluid Viscosity: 70 to 245 SSU Recommended Operating Range, 70 to 2300 SSU Extreme Range. Ambient Temperature: AC 60Hz Valves: -4F to 104F. AC 50Hz Valves: -4F to 122F. DC Valves: -4F to 158F. Recommended Filtration Level: ISO Cleanliness Level 20/18/15 (Up to 3050 PSI), 19/17/14 (Above 3050 PSI). Note: Ratings based on using anti wear hydraulic fluid. For ratings on use with other fluids, contact us for assistance. Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Mounting Considerations: Detented models should mount with longitudinal axis horizontal. Other models may be mounted in any position. Size D05 Subplates & Manifolds: page 338 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 4ea 1/4-20 x 1-1/2 Grade 8 socket head capscrews (Vickers Bolt Kit 255633), torqued to 112 lb.in. maximum with threads lubricated. See Bolt Kits on page 328 Dimensions & Technical Information: page 540
Fluid Conveying

Transient conditions during shift: P to A: All blocked. P to B: All blocked. Maximum Flow Rates @ 3000 PSI: AC Coils 30 GPM, DC Coils 30 GPM.

Catalog Part No. C1KB15 C1KC44 Vickers Part No. 459156 616776 Vickers Model DG4V-5-2C-M-U-EK6-20 DG4V-5-2CJ-M-U-H6-20 Coil Rating 115VAC60Hz 24VDC Optional Features Wt. 9.20 12.40 Price Each
273


Transient conditions during shift: P to A: P & A blocked, B open to T. P to B: P & B blocked, A open to T. Maximum Flow Rates @ 3000 PSI: AC Coils 10 GPM, DC Coils 12 GPM.

Catalog Part No. C1KC47 Vickers Part No. 616780 Vickers Model DG4V-5-6CJ-M-U-H6-20 Coil Rating 24VDC Optional Features Wt. 12.30 Price Each
274

Directional Valves, Solenoid Operated NFPA Size D05 ISO 4401 Size 05 Vickers DG4S4-01 60 Series (Soft Shift, Wet Armature)
Vickers DG4S4-01 60 Series (Soft Shift, Wet Armature) Flows to 20 GPM

Features: Low cost alternative to proportional valves. Conventional direct-acting solenoid design with controlled solenoid shift speed. Wet Armature design for quieter operation and long life with no dynamic seal leakage. Molded coil is impervious to moisture & dirt. Viton seals standard. Operating Principles: Spools with contoured or notched lands are used to provide maximum control of flow rate change as the spool is shifted. DC solenoids prevent coil burnout during controlled rate of solenoid shift. Spool shift speed is controlled by a metering orifice in the solenoid. Three orifice sizes are available. Conventional alternating current (120VAC 60HZ or 110VAC 50HZ) input is converted to DC through a rectifier located in the valve's terminal box. Maximum Operating Pressure: Ports P, A & B 3600 PSI with petroleum oil, 1000 PSI with High Water Base fluids. (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Port T 1000 PSI. Maximum Flow Rates: Dependant on spool/spring combination and coil. See Technical Information section. Recommended Operating Temperature Range: 20F to 180F. Plumbing Note: To fully utilize the features of the soft shift solenoid, the core tubes must remain full of oil. The tank line must be plumbed so that the tank port is always flooded with oil. Addition of a back pressure check may be required to prevent bleed down. Bleeding Procedure: Apply a minimum of 50 PSI tank pressure. Shift either solenoid. Loosen manual actuators in solenoid ends until air is evacuated. Tighten manual actuators. No further bleeding should be required. Technical Information: page 537 Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Size D05 Subplates & Manifolds: page 338 Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 4ea 1/4-20 x 1-1/2 Grade 8 socket head capscrews (Vickers Bolt Kit 255633), torqued to 112 lb.in. maximum with threads lubricated. See Bolt Kits on page 328
Fluid Conveying
4-way, 3-position, spring centered Spool / Spring Code 0C

Transient conditions during shift: P to A: All open. P to B: All open. Maximum Flow Rate @ 3000 PSI: 16 GPM.
4-way, 3-position, spring centered Spool / Spring Code 0C

Catalog Part No. Input Electrical Requirements 110VAC 50HZ 120VAC 60HZ Soft Shift Orifice Dia (in) 0.047 Price Each
Vickers Part No.
Vickers Model DG4S4W-010C-BB-60-S491
Valve's Electrical Features 1/2 NPT Terminal Box with Rectifier Board
Wt. 11.07
C1AD42 02-300110
275

Directional Valves, Solenoid Operated NFPA Size D05 ISO 4401 Size 05 Vickers DG4S4-01 50 Series (Air-Gap)
Vickers DG4S4-01 50 Series (Air-Gap) Flows to 20 GPM

Features: Older style Direct Acting Air Gap Solenoids. (Used as a replacement part for older equipment. New applications should use the Wet Armature 60 Series). Viton seals standard. Maximum Operating Pressure: Ports P, A & B 3000 PSI. Port T 1000 PSI. Maximum Flow Rates: Dependant on spool/spring combination and coil. See Technical Information section. Recommended Operating Temperature Range: Mounting Considerations: Detented models should mount with longitudinal axis horizontal. Other models may be mounted in any position. Service Parts: page 276 Technical Information: page 538 Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Size D05 Subplates & Manifolds: page 338 Mounting Bolts: Standard mounting bolts are 4ea 1/4-20 x 1-1/2 Grade 8 socket head capscrews (Vickers Bolt Kit 255633), torqued to 112 lb.in. maximum with threads lubricated. See Bolt Kits on page 328

Transient conditions during shift: P to A: All blocked. P to B: All blocked. Maximum Flow Rate @ 3000 PSI: 20 GPM (Maximum Recommended is 10 GPM).
Fluid Conveying

Catalog Part No. C1HJ13 Vickers Part No. 290620 Vickers Model DG4S4-012A-H-50 Coil Rating 115VAC60Hz Wiring Coil Type Housing Lead wires None Optional Features Oil Immersed Solenoid Wt. 10.64 Price Each
Vickers DG4S4-01 50 Series (Air Gap) Parts

Vickers DG4S4-01 50 Series (Air Gap) Parts
Catalog Part No. C1JY88 C1BL73 C1BK16 Vickers Part No. 316130 316011 298721 Coil. 115VAC 50HZ. Coil. 115VAC 60HZ. Coil. 230VAC 60HZ. Description Wt. 0.34 0.31 0.34 Price Each
276

Directional Valves, Solenoid Operated NFPA Size D08 ISO 4401 Size 08 Vickers DG5V-8 Series To 5000 PSI
Vickers DG5V-8 Series Flows to 185 GPM Pressures to 5000 PSI

Features: Two-stage directional valve with integrally mounted pilot valve. Available with a wide variety of spool and spring arrangements, electrical options, stroke and pilot choke adjustments, integral check valves and port orifices. Solid cast iron body and core passages for maximum strength and minimal pressure drop. High-force solenoids and centering springs assure consistent shifting. Maximum Operating Pressures: Ports P, A & B: 5000 PSI. (CAUTION: Pressures over 3000 PSI require steel subplate or manifold). Port T: See tables below. Maximum Flow Rates: Dependant on spool/spring combination and coil. See Technical Information section. Recommended Operating Temperature Range: 0F to 150F. Mounting Considerations: Detented models should mount with longitudinal axis horizontal. Other models may be mounted in any position. Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Service Parts: Pilot valve parts page 265 Technical Information: page 542 Size D08 Subplates & Manifolds: Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 4ea 1/2-13 x 2-1/2 Grade 8 socket head capscrews (Vickers Bolt Kit 255635), torqued to 700 lb.in. maximum with threads lubricated. See Bolt Kits on page 328
Fluid Conveying

Transient conditions during shift: All open. Maximum Flow Rate: 185 GPM (At pressures to 5000 PSI).

Catalog Part No. C1HH47 Vickers Part No. 02-343827 Minimum Port T Pilot Rating Pressure Coil Type (psi) (psi) 75 Price Each
Vickers Model DG5V-8-H-8C-E-V M-FTWL-B-10
Coil Rating
Other Features
Wt.
110VAC50Hz Lead wires 5000 120VAC60Hz Conduit box
External Pilot, Internal Drain, Wired Terminal Block, Indicator 31.57 Lights, High Performance pilot valve
277

Directional Valves, Solenoid Operated NFPA Size D10 ISO 4401 Size 10 Vickers DG5V-10 Series To 5000 PSI
Vickers DG5V-10 Series Flows to 290 GPM Pressures to 5000 PSI

Features: This control valve package offers a wide variety of spool and spring arrangements, pilot choke adjustments, integral check valves, pilot valve choices and port orifices. High force solenoids and centering springs assure consistent shifting through a wide range of pressure and silting extremes. Maximum Operating Pressure: Ports P, A & B 5000 PSI with petroleum oil. Port T pressure rating is 3000 PSI for external drain models, 3000 psi for internal drain models with D03 pilot valve, and is 1450 PSI for internal drain models with D05 pilot valve (see table below for Port T rating). Maximum Flow Rates: Dependant on spool/spring combination and coil. Recommended Operating Temperature Range: 0F to 150F. Mounting Considerations: Detented models should mount with longitudinal axis horizontal. Other models may be mounted in any position, provided that the pilot pressure supply is maintained as required (Spring offset valves do not have a spring in the main spool section). Note: These valves are available in a wide variety of configurations not shown in this catalog. Contact us for detailed information. Size D10 Subplates & Manifolds: Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Mounting Bolts: Standard mounting bolts are 6ea 3/4-10 x 2-3/4 Grade 8 socket head capscrews (Vickers Bolt Kit BKDG10-636-255636), torqued to 210 lb.ft. maximum with threads lubricated. See Bolt Kits on page 328 Dimensions & Technical Information: page 543

Maximum Flow Rates @ 3000 PSI: 270 GPM.

Catalog Part No. C1HH41 Vickers Part No. 02-321785 Minimum Pilot Port T Rating Pressure Coil Type (psi) (psi) 150 Price Each
Vickers Model DG5V-10-S-2C-TM-FW-B-10
Coil Rating
Other Features Internal Pilot, Internal Drain, Std. Performance D03 pilot valve
Wt.
110VAC50Hz Lead wires 120VAC60Hz Conduit box 1450
278

Flow Control Valves
Inline Flow Control Valves For Hydraulic (To 12 GPM) & Pneumatic Service
Features: Tamperproof adjustment key is standard. Knurled knob is optional. Locknut is standard. Application: Controlled flow in one direction, free flow in opposite direction. Flow adjustment can be made under pressure. Setting can be locked with locknut. Brass valves for use in pneumatic systems and lower pressure hydraulic systems. Steel valves for use in hydraulic systems. Pressure ratings in tables are for non-shock service. Materials: Body: Available in Brass, carbon steel or stainless steel. Needle: Brass on brass valves, 416 stainless steel on steel and stainless steel valves. Backup Washer: Teflon. Optional Knob: Aluminum. Tamper proof Key: Cadmium plated steel. Retainer and ball: Stainless steel. Operating Temperature Range: -15F to 200F. Inline Flow Control Valves For Hydraulic (To 12 GPM) & Pneumatic Service
Maximum Operating Pressure Non-Shock (psi) 2000 2000 5000 2000 5000 5000 Flow Rating (GPM) 1.5 3.0 3.0 5.0 5.0 8.0
Fluid Conveying
Catalog Part No.
Deltrol Model
Size 1/8 1/4 1/4 3/8 3/8 1/2
Threads 1/8-27 NPT 1/4-18 NPT 1/4-18 NPT 3/8-18 NPT 3/8-18 NPT 1/2-14 NPT
Body Material Brass Brass Steel Brass Steel Steel
CV Factor 0.20 0.43 0.43 0.78 0.78 1.24
A (in)
B (in)
C (in)
Wt. 0.22 0.43 0.43 0.73 0.67 1.18
Price Each
C1CP34 F10B C1CP38 F20B C1CP39 F20S C1CP46 F25B C1CP47 F25S C1CP50 F30S
0.69 0.88 0.20 0.88 1.00 0.36 0.88 1.00 0.36 1.06 1.81 0.34 1.06 1.81 0.34 1.31 1.44 0.47
Note: Models with K at end of model number have knurled adjustment knob instead of tamperproof adjustment key.
279

Flow Control Valves
Inline Easy Read Flow Control Valves For Hydraulic (To 55 GPM) & Pneumatic Service
Features: Color coding and numerical readout allow positive, precise and repeatable settings. Can be accurately adjusted within a small fraction of a turn (one full turn per color). Metal knob and stem for durability. Application: Controlled flow in one direction, free flow in opposite direction. Flow adjustment can be made under pressure. Setting can be locked with set screw. Brass valves for use in pneumatic systems and lower pressure hydraulic systems. Steel valves for use in hydraulic systems. Pressure ratings in tables are for non-shock service. Materials: Body: Available in Brass, carbon steel or stainless steel (1" size available in naval bronze or ductile iron). Needle: Brass on brass valves, stainless steel on steel and stainless steel valves. O-Ring: Viton is standard (other materials available). Washer Seal: Teflon. Retainer, Ball and Spring: Stainless steel. Ball Follower: Delrin. Operating Temperature Range: -15F to 200F. Inline Easy Read Flow Control Valves For Hydraulic (To 55 GPM) & Pneumatic Service
Maximum Operating Pressure Non-Shock (psi) 2000 5000 2000 5000 2000 5000 5000 5000 2000 5000 2000 5000 Flow Rating (GPM) 3.0 3.0 6.0 6.0 10.0 10.0 10.0 10.0 12.0 12.0 20.0 20.0
Fluid Conveying
Catalog Part No.
Deltrol Model
Size 1/8 1/8 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 3/4 3/4
Threads 1/8-27 NPT 1/8-27 NPT 1/4-18 NPT 1/4-18 NPT 3/8-18 NPT 3/8-18 NPT SAE-6 SAE-8 1/2-14 NPT 1/2-14 NPT 3/4-14 NPT 3/4-14 NPT
Body Material Brass Steel Brass Steel Brass Steel Steel Steel Brass Steel Brass Steel
CV Factor 0.28 0.28 0.53 0.53 0.76 0.76 0.76 0.76 0.93 0.93 1.43 1.43
A (in)
B (in)
C (in)
Wt. 0.25 0.24 0.42 0.39 0.82 0.76 0.50 1.05 1.22 1.22 1.86 1.72
Price Each
C1CN99 EF10B C1GG80 EF10S C1CP11 EF20B C1CP12 C1CP14 C1KL39 C1JS27 C1CP16 EF20S EF25S EFM620S EFM825S EF30S C1CP13 EF25B
1.28 0.63 1.94 1.28 0.63 1.94 1.41 0.75 2.41 1.41 0.75 2.41 1.63 1.63 1.63 1.63 1.0 1.0 1.0 1.0 2.88 2.88 2.88 2.88
C1CP15 EF30B C1CP17 EF35B C1CP18 EF35S
1.97 1.63 3.44 1.97 1.63 3.44 2.19 1.38 3.75 2.19 1.38 3.75
Inline Flow Control Valves Vickers FN Series To 50 GPM

Inline Flow Control Valves Vickers FN Series To 50 GPM
Catalog Part No. C1JX95 Vickers Part No. 253361 Vickers Model FN-03-20 Description Non-Compensated Inline Adjustable Flow Control with Free Reverse Flow, 10 GPM Maximum Recommended Flow, 3/8" NPT Ports Wt. 1.30 Price Each
Note: Please contact us for technical & application information on these valves.
280

Flow Control Valves
Inline Pressure Compensated Flow Control Valves Deltrol PC Series To 30 GPM
Features: Maintains accurate constant flow at pressures up to 3,000 PSI (Non-shock service). Fixed (Factory set PC3 and PC4 models) and Adjustable (PC5 models). Free reverse flow (PC5 models). Application: Flows are controlled within 15% up to 1.5 GPM and at 10% at higher flows up to 30 GPM. Regulation is virtually unaffected by temperature changes from 60F to 180F (2% at 70F DT, 4% at 120F DT). Series 3 and Series 4 models have a restricted reverse flow as limited by the internal orifice. Series 5 models have a free reverse flow. Materials: Steel body (PC3 and PC5 models), Aluminum body (1/4 and 3/8 PC4 models), Steel body (1/2 and 3/4 PC4 models. Viton O-Rings. Aluminum knob (PC5 models). Operating Temperature Range: -15F to 400F. Inline Pressure Compensated Flow Control Valves Deltrol PC Series To 30 GPM
Maximum Operating Pressure Non-Shock (psi) 3000 Minimum Differential Pressure (PSI) Dimensions 100 A=0.69 B=2.38
Fluid Conveying
Catalog Part No.
Deltrol Model
Series Series 3
Size 1/4
Threads 1/4-18 NPT
Body Material Steel
Controlled Flow 0.20 GPM Fixed
Wt. 0.20
Price Each
C1GK41 PC3-2-0.20
281

Flow Control Valves
Inline Easy Read Pressure Compensated Flow Control Valves Deltrol EPC Series To 34 GPM
Features: Pressure Compensated. Color coding and numerical readout allow positive, precise and repeatable settings. Can be accurately adjusted within a small fraction of a turn (one full turn per color). Metal knob and stem for durability. Application: Controlled flow in one direction, free flow in opposite direction. Valves will start to control flow at 60 to 70 PSI pressure drop. Flow regulated between 10% above 1.5 GPM, 15% 0.5 to 1.5 GPM. Flow adjustment can be made under pressure. Setting can be locked with set screw. Steel valves for use in hydraulic systems. Materials: Body: Steel. Needle: Stainless steel. O-Ring: Viton. Washer: Teflon. Knob: Aluminum. Piston: Steel. Spring: Music wire. Operating Temperature Range: -15F to 200F. Inline Easy Read Pressure Compensated Flow Control Valves Deltrol EPC Series To 34 GPM
Catalog Part No. Maximum Operating Pressure (PSI) 3000 3000 Controlled Flow Range (GPM) 1.0 to 10 1.5 to 15 Minimum Differential Pressure (PSI) 70 70 A (in) B (in) C (in) Price Each
Fluid Conveying
Deltrol Model
Size 3/8 1/2
Wt. 2.47 3.00
C1CP31 EPC531 C1CP32 EPC541
1.97 1.50 5.42 1.97 1.63 5.88
282

Flow Control Valves
2-Port Non-Compensated Flow Control Valves Vickers FCV7-10 Series To 12 GPM
Features: The FCV7-10 is a non-pressure compensated, adjustable, flow restrictor. Cartridge style (Requires a machined cavity or housing for installation). Application: Controlled flow in one direction, free flow in opposite direction. Maximum Flow Rate: 12 GPM. Maximum Operating Pressure: 3000 PSI Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model FCV7-10-* , sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 2-Port Non-Compensated Flow Control Valves Vickers FCV7-10 Series To 12 GPM
Catalog Part No. C1JT27 Vickers Part No. 02-113005 Vickers Model FCV7-10-K-0-NV Maximum Flow Range (GPM) 0-12 Adjustment Type Knob Housing None Seal Material Buna-N Wt. 0.30 Price Each
Fluid Conveying
Parts for Vickers FCV7-10 Flow Control Valves

Catalog Part No. C1FK22 Part Number Knob SK2-10-2 Buna-N Seal Kit 565806 Description Wt. 0.07 0.01 Price Each
C1KB65 565585
283

Flow Control Valves
Fixed Priority Flow Control with Relief on Priority Port Vickers Circuit Maker PFRR-10 To 6 GPM Regulated
Features: Priority flow pressure compensation All ports except T can be pressurized to 3000 psi Aluminum in-line type housing Tamper proof and adjustable relief options Gauge port All components in the package are true cartridges and can be removed from the housing without disturbing the plumbing Note: Some assembly required. Application: This standard valve package is used to maintain constant flow to priority circuits when input flow is greater than required, regardless of changes in upstream or downstream pressure. It will bypass the rest of the flow to an auxiliary circuit or to tank. Relief valve on a priority port limits pressure on a priority port, as well as ensures bypass flow when there is no demand on priority circuit. Maximum Inlet Flow: 15 GPM. Regulated Flow Setting: 0.1 - 6.0 GPM (Fixed, non-adjustable) Maximum Operating Pressure: 3000 PSI (All ports except port T). Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridges: Fixed Priority Flow Control Cartridge, PFR1-10-F-0-*, sold separately. Relief Cartridge, RV5-10-*-0-*, sold separately. Housing: 02-178276, sold separately. Fixed Priority Flow Control with Relief on Priority Port Vickers Circuit Maker PFRR-10 To 6 GPM Regulated
Catalog Part No. C1FJ12 C1FH97 C1FQ46 C1FM79 C1AD24 Vickers Part No. 02-178276 02-165713 02-164209 02-164222 02-164723 Vickers Model -PFR1-10-F-0-4.00 RV5-10-S-0-35/15 RV5-10-S-0-20/12 RV5-10-S-0-35/14.5 Select (1) housing, (1) flow control cartridge and (1) relief cartridge to make each valve assembly Housing, Aluminum, SAE-8 Ports (except SAE-4 Gauge Port) Fixed Priority Flow Control Cartridge, Set at 4 GPM (Non-Adjustable) Relief Cartridge, 250-3500 PSI Range (Set at 1500), Screw Adjustment, Buna-N Seals Relief Cartridge, 100-2000 PSI Range (Set at 1200), Screw Adjustment, Buna-N Seals Relief Cartridge, 250-3500 PSI Range (Set at 1450), Screw Adjustment, Buna-N Seals Wt. 1.53 0.26 0.53 0.51 0.52 Price Each
Note: Some assembly required. Select (1) housing, (1) flow control cartridge and (1) relief cartridge to make each valve assembly
284

Flow Control Valves
3-Port Pressure Compensated Priority Flow Control Vickers PFR2-10 Series To 10 GPM Regulated
Fluid Conveying
Features: Cartridge style (Requires a machined cavity or housing for installation). The flow adjustment range is from the factory set maximum flow rate down to 50% of that rate. Pressure compensated for accurate flow control regardless of changes in input or load pressure. Application: This valve maintains a constant priority flow from port 1 to port 3 based on the setting adjustment, regardless of pressure changes downstream on port 3. Flow in excess of the priority setting is directed to port 2. If the priority flow at port 3 is blocked, the spool will shift to satisfy the priority flow requirement, thereby closing off flow to port 2. Maximum Flow Rate: 15 GPM (Inlet), 10 GPM (Priority). Maximum Operating Pressure: 3000 PSI. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model PFR2-10*, sold separately. Housing: Cavity size C-10-3, sold separately, see page 330 3-Port Pressure Compensated Priority Flow Control Vickers PFR2-10 Series To 10 GPM Regulated
Catalog Part No. Vickers Part No. Vickers Model PFR2-10-S-0/12.00 Adjustable Flow Range (GPM) 6.0 - 12.0 Adjustment Type Screw with Locknut Housing None Seal Material Buna-N Wt. 0.50 Price Each
C1FQ61 02-165669
285

Flow Control Valves
Pressure & Temperature Compensated Flow Control Valves Vickers F(C)G-02/03 Series To 28 GPM Regulated
Features: Both pressure and temperature compensated to minimize flow variation resulting from changes in fluid pressure and temperature. 4-1/2 turns of dial from full closed to full open. Subplate mounted. Key lock is standard (2 keys are furnished with valve). Application: Precise control of flow rate is obtained by rotating the dial. Maximum throttle openings may be limited by addition of spacers to the throttle shaft under the selector dial. Maximum Operating Pressure: Size -02 Models: 3600 PSI. Size -03 Models: 3000 PSI. Maximum Flow Capacity: Size -02 Models: 10 GPM. Size -03 Models: 28 GPM. Maximum Knob Torque Required: Size -03 Models: 20 lb. in. @ 3000 PSI (Proportional to outlet pressure). Recommended Filtration Level: ISO 4406 Cleanliness Level 19/17/14 or cleaner. Mounting Bolts: Size -02 Models: Standard mounting bolts are (4) 5/16-18 x 2 Grade 8 socket head capscrews (Vickers Bolt Kit BKFG-02-640), torqued to 305 lb. in. Size -03 Models: Standard mounting bolts are (4) 3/8-16 x 3 Grade 8 socket head capscrews (Vickers Bolt Kit 255645, BKFG-03-645), torqued to 350 lb. in. See Bolt Kits on page 328 Subplates: Size -02 Models: Vickers Model FGM-02-20 (3/8 NPT) or FGM-02X-20 (1/2 NPT) sold separately. Size -03 Models: Vickers Part No. 681670 (Model FGM-03SZ-10) sold separately Pressure & Temperature Compensated Flow Control Valves Vickers F(C)G-02/03 Series To 28 GPM Regulated
Catalog Part No. C1KA32 Vickers Part No. 420607 Vickers Model FCG-02-1500-50 Flow Range 10 to 1500 in/min Reverse Flow Check Yes Seal Material Buna-N Other Features Wt. 8.39 Price Each
286

Flow Control Valves
3-Port Pressure Compensated Priority Flow Control Valves Brand FC51 Series To 90 GPM Regulated
Features: Precision ground chrome plated spool for long life. Diamond honed spool bore provides consistent spool fit with low leakage. Every valve is factory tested for shutoff, linearity, max. flow & pressure compensation. Application: The FC-51 full range pressure compensating variable flow control is designed so that the orifice area varies as the lever is rotated. Fluid travels past the variable orifice, through the compensator spool and then out the controlled flow port. The flow out of the CF port is proportional to the orifice area which can vary from closed to open. The sum of the controlled flow and the excess flow equal the inlet flow, and as the controlled flow increases the excess flow decreases. Both outlets are pressure compensated by a spool that maintains a constant flow while adjusting for pressure. Hunting between a compensated pump and the valve is dampened with a dashpot on the compensator spool. The FC-51 can be used as a 2-port flow control by plugging the excess flow port, and, for best results, limiting the flow to about 50% of the valve's rated flow. Materials: Cast iron body. Heat treated spools (Stainless steel available). Buna-N O-Rings (Standard). Maximum Operating Pressure: 3000 PSI. Recommended Filtration: 30 micron. 3-Port Pressure Compensated Priority Flow Control Valves Brand FC51 Series To 90 GPM Regulated
Catalog Part No. Brand Model Port Size 3/8 NPT 1/2 NPT -10 SAE 3/4 NPT -12 SAE 1 NPT 1-1/4 NPT Flow Range (GPM) 0-8 GPM 0-16 GPM 0-16 GPM 0-30 GPM 0-30 GPM 0-50 GPM 0-90 GPM Spool Material Steel Steel Steel Steel Steel Steel Steel Wt. 8.03 7.75 8.80 7.60 8.20 30.18 30.18 Price Each
Fluid Conveying
C1CQ87 FC-51-3/8 C1CQ83 FC-51-1/2 C1KV87 C1KV88 C1CQ81 C1CQ82 FC-51-10SAE FC-51-12SAE FC-51-1 FC-51-1-1/4 C1CQ85 FC-51-3/4
287

Flow Control Valves
3-Port Pressure Compensated Priority Flow Control Valves (With Relief) Brand FCR51 Series To 90 GPM Regulated
Features: Precision ground chrome plated spool for long life. Diamond honed spool bore provides consistent spool fit with low leakage. Every valve is factory tested for shutoff, linearity, max. flow & pressure compensation. High lift ball spring relief valve. Application: The FCR-51 full range pressure compensating variable flow control is designed so that the orifice area varies as the lever is rotated. Fluid travels past the variable orifice, through the compensator spool and then out the controlled flow port. The flow out of the CF port is proportional to the orifice area which can vary from closed to open. Once the pressure on the CF port increases above the relief setting, the relief valve opens and diverts flow to the EX port while maintaining pressure on the CF port. The EX port must be plumbed back to tank for the relief to function. The sum of the controlled flow and the excess flow equal the inlet flow, and as the controlled flow increases the excess flow decreases. Both outlets are pressure compensated by a spool that maintains a constant flow while adjusting for pressure. Hunting between a compensated pump and the valve is dampened with a dashpot on the compensator spool. Materials: Cast iron body. Heat treated spools (Stainless steel available). Buna-N O-Rings (Standard). Maximum Operating Pressure: 3000 PSI. Recommended Filtration: 30 micron. 3-Port Pressure Compensated Priority Flow Control Valves (With Relief) Brand FCR51 Series To 90 GPM Regulated
Catalog Part No. Brand Model Port Size 3/8 NPT 1/2 NPT 3/4 NPT Flow Range (GPM) 0-8 GPM 0-16 GPM 0-30 GPM Spool Material Steel Steel Steel Wt. 7.89 7.89 7.58 Price Each
C1CT52 FCR-51-3/8 C1CT50 FCR-51-1/2 C1CT51 FCR-51-3/4
288

Logic Element Valves
Differential Pressure Sense Valve Vickers DPS2-20 Series To 80 GPM
Fluid Conveying
Features: The DPS2-20 is a differential pressure sensing valve, available as either a spool or poppet type and with either, internal or external pilot. Application: This valve is used as a main section of a pilot controlled valve assembly. This valve has multiple uses when used with either directional control, flow control or pressure control cartridges. Maximum Flow Rate: 80 GPM Maximum Operation Pressure: 4200 PSI (spool type), 5000 PSI poppet type) Temperature Range: -40 F to 248 F Recommended Filtration Level: Cleanliness code 18/16/13 Cartridge: Model DPS2-20-*, sold separately Housing: Cavity size C-20-3S, sold seperately, see page 330 Differential Pressure Sense Valve Vickers DPS2-20 Series To 80 GPM
Catalog Part No. Vickers Part No. 565608 Vickers Model DPS2-20-P-F-0-80 Function Spool, N/C (L/S element) Stroke Adjustment None Differential Pressure Setting 80 PSI Wt. 1.66 Price Each
C1KF25
289

Flow Divider Valves
Proportional Flow Dividers Brand B50 Series To 30 GPM
Features: Precision ground heat treated spools for long life. Pressure compensation for both outlet ports. Every valve is factory tested for flow ratio and pressure compensation. Application: The B-50 is a non-adjustable divider that receives a single stream and divides into two streams. The two outlet flows are pressure compensating and the sum of outlet flows equal the inlet flow. Flow is from inlet to outlet only. The standard outlet flow ratio is 50:50. WARNING: Spool may bind if valve is mounted with bolts through valve against a flat surface (housing can distort). Mount valve with rigid spacers between valve body and mounting surface to prevent housing distortion. Materials: Cast iron body. Buna-N O-Rings. Heat treated steel spool. Maximum Operating Pressure: 3000 PSI. Recommended Filtration: 30 micron. Proportional Flow Dividers Brand B50 Series To 30 GPM
Catalog Part No. C1KV81 Brand Model B-50-10SAE Port Size 1/2 NPT -10 SAE 3/4 NPT Inlet Flow Range (GPM) 8-16 GPM 8-16 GPM 16-30 GPM Outlet Flow Ratio 50:50 50:50 50:50 Wt. 4.89 2.20 5.00 Price Each
Fluid Conveying
C1CK97 B-50-1/2 C1CK98 B-50-3/4
290

Flow Divider Valves
Proportional Flow Dividers (With Free Reverse Flow) Brand B100 Series To 30 GPM
Fluid Conveying
Features: Precision ground heat treated spools for long life. Pressure compensation for both outlet ports. Free reverse flow. Every valve is factory tested for flow ratio and pressure compensation. Application: The B-100 is a non-adjustable divider that receives a single stream and divides into two streams. The two outlet flows are pressure compensating and the sum of outlet flows equal the inlet flow. Flow can travel in reverse through both outlet ports and is not metered when going in reverse. The standard outlet flow ratio is 50:50. WARNING: Spool may bind if valve is mounted with bolts through valve against a flat surface (housing can distort). Mount valve with rigid spacers between valve body and mounting surface to prevent housing distortion. Materials: Cast iron body. Buna-N O-Rings. Heat treated steel spool. Maximum Operating Pressure: 3000 PSI. Recommended Filtration: 30 micron. Proportional Flow Dividers (With Free Reverse Flow) Brand B100 Series To 30 GPM
Catalog Part No. Brand Model Port Size 3/8 NPT 3/4 NPT Inlet Flow Range (GPM) 2-8 GPM 16-30 GPM Outlet Flow Ratio 50:50 50:50 Wt. 4.91 4.64 Price Each
C1CK93 B-100-3/8 C1CK92 B-100-3/4
291

Flow Divider Valves
Proportional Flow Dividers (With Combining Feature) Vickers FDC1-10 Series To 12 GPM
Application: The Vickers FDC1-10 Divider/Combiner proportionally divides a single flow of hydraulic oil into two equal or unequal flows, and combines in the reverse direction. The flow ratios remain constant despite load differences between the ports. Accuracy is 10% when used within the recommended flow range. A special feature of the FDC1 valve is that it provides rephase flow to either port when one is blocked. Example: If one cylinder bottoms out first, the opposite cylinder is provided with rephase flow to allow it to bottom out also. Flow Ratings: Nominal Inlet Flow 12 GPM (18 GPM Maximum). Maximum Operating Pressure: 3000 PSI. Accuracy: 10%. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model FDC1-10*, sold separately. Housing: Cavity size C-10-4, sold separately, see page 331 Proportional Flow Dividers (With Combining Feature) Vickers FDC1-10 Series To 12 GPM
Catalog Part No. C1EL11 Vickers Part No. 566003 Vickers Model FDC1-10-0-11 Inlet Flow Range Outlet Flow Ratio (GPM) (Port 4:Port2) 0.74 - 2.9 50:50 Housing None Seals Buna-N Wt. 0.22 Price Each
292

Gate Valves
Brass Gate Valves Brass M Gate Valve
Features: Screw-in bonnet. Application: For water and steam service. Maximum Operating Pressure: 125 WSP (steam), 200 PSI (WOG). Brass Gate Valves Brass M Gate Valve
Catalog Part No. C1KU82 ACR Model 3801 Ports 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Wt. 0.57 0.51 0.85 1.20 1.70 2.20 3.30 Price Each
C1KU83 3802 C1KU84 3803 C1KU85 3804-ACR C1KU86 3805 C1KU87 3806-ACR C1KU88 3807-ACR
Fluid Conveying
293

Needle Valves
Inline Needle Valves For Hydraulic (To 34 GPM) & Pneumatic Service
Features: Wide adjustment range due to fine thread. Tamperproof adjustment key is standard. Knurled knob is optional. Locknut is standard. Application: Controlled flow in both directions. Flow adjustment can be made under pressure. Setting can be locked with locknut. Brass valves for use in pneumatic systems and lower pressure hydraulic systems. Steel valves for use in hydraulic systems. Pressure ratings in tables are for non-shock service. Materials: Body: Available in Brass, carbon steel or stainless steel. Needle: Brass on brass valves, 416 stainless steel on steel and stainless steel valves. O-Ring Packing: Viton. Backup Washer: Teflon. Optional Knob: Aluminum. Tamper proof Key: Cadmium plated steel. Operating Temperature Range: -15F to 400F. Inline Needle Valves For Hydraulic (To 34 GPM) & Pneumatic Service
Maximum Operating Pressure Non-Shock (psi) 2000 2000 Flow Rating (GPM) 7.0 13.5
Fluid Conveying
Catalog Part No. C1DF59
Deltrol Model N20B
Size 1/4 3/8
Body Material Brass Brass
CV Factor 0.43 0.78
A (in)
B (in)
E (in)
Wt. 0.39 0.59
Price Each
0.88 1.00 2.00 1.06 1.81 2.25
C1DF61 N25B
Note: Models with K at end of model number have knurled adjustment knob instead of tamperproof adjustment key.
294

Needle Valves
Inline Easy Read Needle Valves For Hydraulic (To 100 GPM) & Pneumatic Service
Features: Color coding and numerical readout allow positive, precise and repeatable settings. Can be accurately adjusted within a small fraction of a turn (one full turn per color). Metal knob and stem for durability. Application: Controlled flow in both directions. Flow adjustment can be made under pressure. Setting can be locked with set screw. Brass valves for use in pneumatic systems and lower pressure hydraulic systems. Steel valves for use in hydraulic systems. Pressure ratings in tables are for non-shock service. Materials: Body: Available in Brass, carbon steel or stainless steel (1" size available in naval bronze or ductile iron). Needle: Brass on brass valves, stainless steel on steel and stainless steel valves. O-Ring: Viton is standard (other materials available). Washer Seal: Teflon. Knob: Aluminum. Operating Temperature Range: -15F to 400F. Inline Easy Read Needle Valves For Hydraulic (To 100 GPM) & Pneumatic Service
Maximum Operating Pressure Non-Shock (psi) 2000 5000 2000 5000 2000 5000 2000 5000 2000 5000 Flow Rating (GPM) 4.5 4.5 10.0 10.0 18.0 18.0 28.0 28.0 40.0 40.0
Fluid Conveying
Catalog Part No.
Deltrol Model
Size 1/8 1/8 1/4 1/4 3/8 3/8 1/2 1/2 3/4 3/4
Threads 1/8-27 NPT 1/8-27 NPT 1/4-18 NPT 1/4-18 NPT 3/8-18 NPT 3/8-18 NPT 1/2-14 NPT 1/2-14 NPT 3/4-14 NPT 3/4-14 NPT
Body Material Brass Steel Brass Steel Brass Steel Brass Steel Brass Steel
CV Factor 0.25 0.25 0.51 0.51 0.92 0.92 1.20 1.20 1.84 1.84
A (in)
B (in)
D (in)
Wt. 0.19 0.19 0.32 0.29 0.63 0.59 0.91 0.83 1.46 0.05
Price Each
C1CP21 EN10B C1CP22 EN10S C1CP23 EN20B
1.28 0.63 1.44 1.28 0.63 1.44 1.41 0.75 2.56 1.41 0.75 2.56 1.63 1.00 3.25 1.63 1.00 3.25 1.97 1.13 3.56 1.97 1.13 3.56 2.19 1.38 4.13 2.19 1.38 4.13
C1CP24 EN20S C1CP25 EN25B C1CP26 EN25S C1CP27 EN30B C1CP28 EN30S C1CP29 EN35B C1CP30 EN35S
295

Needle Valves
Inline Needle Valves For Hydraulic & Pneumatic Service
Features: Bar stock construction for reliable performance. Hard seats. Bonnet is threaded for optional panel mounting. Application: Controlled flow in both directions. Materials: Zinc plated AISI 1213 alloy steel body & bonnet. 316 stainless steel hardened stem. Black polyethylene bonnet cap. Yellow cast aluminum handle (1/8 - 1/2 sizes). Yellow malleable iron handle (3/4-1 sizes). Grafiflex packing. Maximum Operating Pressure: 10,000 PSI. (Minimum burst pressure is 20,000 PSI). Operating Temperature Range: -100F to 500F. Inline Needle Valves For Hydraulic & Pneumatic Service
Catalog Part No. Marsh Model Size 1/4 3/8 1/2 Threads 1/4 NPT 3/8 NPT 1/2 NPT CV Factor 0.4 0.9 1.1 A (in) B (in) C (in) D (in) E (in) G (in) J (in) 3.06 3.75 3.75 1.03 1.44 1.44 2.06 2.88 2.88 2.50 2.50 2.50 1.00 1.38 1.38 0.38 0.75 0.75 0.78 0.91 0.91 Wt. 0.77 1.59 1.50 Price Each
Fluid Conveying
C1DF55 N1512 C1DF56 N1513 C1DF57 N1514
296

Needle Valves
Cartridge Type Needle Valves Vickers NV1-10 Series To 12 GPM
Fluid Conveying
Features: Cartridge style (Requires a machined cavity or housing for installation). Rotary knob. Application: Controlled flow in both directions. Rated Flow: 12 GPM. Maximum Operating Pressure: 3000 PSI. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model NV1-10*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Cartridge Type Needle Valves Vickers NV1-10 Series To 12 GPM
Catalog Part No. C1GH56 Vickers Part No. 565590 Vickers Model NV1-10-K-0 Knob Color Black Housing None Seal Material Buna-N Wt. 0.23 Price Each
Parts for Vickers NV1-10 Needle Valve Cartridges

297

Plug Valves
Brass 2-Way Shut-Off Plug Valves Male Pipe to Female Pipe (Straight)
Features: Instantaneous on-off operation with 360 handle rotation. Lapped brass body and plug are individually mated, providing an excellent quality, low friction valve. Application: Used extensively for water process piping and air supply systems. Maximum Operating Pressure: 30 PSI. Operating Temperature Range: -40F to 250F. Brass 2-Way Shut-Off Plug Valves Male Pipe to Female Pipe (Straight)
Catalog Anderson Brass Part No. Model C1AK34 130C-L Size 1/4 Threads 1/4 NPT Wt. 0.20 Price Each
Brass 3-Way Side Outlet Plug Valves Female Pipe
Features: Pointer lever to indicate port selection. Audible Click mechanism is standard. Valves are not lubricated and require no lubrication. O-Ring sealed cap and stem. Brass body and CELCON plug produce a fine seal that will not seize or gall. Application: Generally recommended for operation in gasoline, oil, air, water and detergent systems. Maximum Operating Pressure: 30 PSI. Operating Temperature Range: -40F to 180F. Brass 3-Way Side Outlet Plug Valves Female Pipe
Catalog Anderson Brass Part No. Model C1BB99 210C-N Size Threads 3/8 3/8 NPT Fluid Port Dia. (in) 0.312 Handle Movement Features Click is felt at each position. Handle rotates 360. L (in) 1.375 Wt. 0.50 Price Each
298

Plug Valves
Brass 4-Way Bottom Outlet Plug Valves Female Pipe
Features: Pointer lever to indicate port selection. Audible Click mechanism is standard. Valves are not lubricated and require no lubrication. O-Ring sealed cap and stem. Brass body and CELCON plug produce a fine seal that will not seize or gall. Application: Generally recommended for operation in gasoline, oil, air, water and detergent systems. Maximum Operating Pressure: 30 PSI. Operating Temperature Range: -40F to 180F. Brass 4-Way Bottom Outlet Plug Valves Female Pipe
Catalog Anderson Brass Part No. Model C1EF53 200C-N Size Threads 3/8 3/8 NPT Fluid Port Dia. (in) 0.312 Handle Movement Features Click is felt at each position. Handle rotates 360. L (in) 1.375 Wt. 0.54 Price Each
Fluid Conveying
299

Pressure Reducing Valves
Direct-Acting Pressure Reducing (Relieving) Valves Vickers PRV1-10 Series To 4 GPM & 2400 PSI
Features: The PRV1-10 is a direct acting, spool type screw-in cartridge pressure reducing/relieving valve, and requires a machined cavity or housing for installation. Application: Valve is normally open, allowing flow from port 2 to port 1. Port 3 is a drain and must be vented back to reservoir. Once the pressure setting is reached at port 1, the spool shifts to restrict the inlet flow at port 2. This regulates the pressure at port 1. If pressure at port 1 exceeds the predetermined setting of the valve, the spool will shift further and relieve excess pressure through port 3. Pressure Rating: 2400 PSI (All ports). Rated Flow: 4 GPM. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model PRV1-10*, sold separately. Housing: Cavity size C-10-3, sold separately, see page 330 Direct-Acting Pressure Reducing (Relieving) Valves Vickers PRV1-10 Series To 4 GPM & 2400 PSI
Catalog Part No. Adjustment Type Screw and locknut Cracking Pressure Range (psi) 400-2400 Factory Setting (psi) Mid-Range (apprx) Seal Material Buna-N Price Each
Vickers Part No.
Vickers Model PRV1-10-S-0-24/
Housing None
Wt. 0.56
C1BT43 565886
300

Pressure Reducing Valves
Pilot-Operated Pressure Reducing (Relieving) Valves Vickers PRV2-10 Series To 10 GPM & 3500 PSI
Features: The PRV2-10 is a pilot operated, spool type screw-in cartridge pressure reducing/relieving valve, and requires a machined cavity or housing for installation. Application: This valve is normally open, allowing flow from port 2 to port 1. Port 3 is a drain and must be vented back to reservoir. Once the pressure setting is reached at port 1, the spool shifts to restrict the inlet flow at port 2. This regulates the pressure at port 1. If pressure at port 1 exceeds the predetermined setting of the valve, the spool will shift further and relieve excess pressure through port 3. Pressure Rating: 3500 PSI All ports (CAUTION: Pressures over 3000 PSI require steel housing). Rated Flow: 10 GPM. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Cartridge: Model PRV2-10*, sold separately. Housing: Cavity size C-10-3, sold separately, see page 330 Pilot-Operated Pressure Reducing (Relieving) Valves Vickers PRV2-10 Series To 10 GPM & 3500 PSI
Catalog Part No. C1ZZ80 Adjustment Type Screw and locknut Cracking Pressure Range (psi) 250-3500 Factory Setting (psi) 2500 Seal Material Buna-N Price Each
Fluid Conveying
Vickers Model PRV2-10-S-0-35/25
Housing None
Wt. 0.20
301

Relief Valves Direct-Acting Ball Type
3-Port Direct-Acting Relief Valves Brand RL Series To 20 GPM
Features: In-line mounting. Precision built. Hardened, replaceable seat. Adjustment Style: Adjustment screw underneath removable cap. Maximum Operating Pressure: 3000 PSI. Maximum Flow Rate: 20 GPM. 3-Port Direct-Acting Relief Valves Brand RL Series To 20 GPM
Catalog Part No. Brand Model Adjustment Range (psi) 150-3000 150-3000 Pressure Port 1/2 NPT 3/4 NPT Tank Port 1/2 NPT 1/2 NPT Wt. 2.67 2.30 Price Each
Fluid Conveying
C1GK51 RL-50 C1DK23 RL-75
302

Relief Valves Direct-Acting Poppet Type
Panel Mount Direct-Acting Relief Valves Vickers C-175 To 3 GPM
Fluid Conveying
Features: Panel mounting. Typically used to remotely control a ventable relief valve. Adjustment Style: Knob with jam nut. Maximum Operating Pressure: 3000 PSI. Maximum Flow Rate: 3 GPM. Panel Mount Direct-Acting Relief Valves Vickers C-175 To 3 GPM
Catalog Vickers Part No. Part No. Vickers Model C-175-F-20 Adjustment Range (psi) 1500-3000 Inlet Port 1/4 NPT Outlet Port 1/4 NPT Seal Material Viton Wt. 3.30 Price Each
C1BW85 631056
303

Relief Valves Direct-Acting Poppet Type
Cartridge Type Direct-Acting Relief Valves Vickers RV1-10 Series To 10 GPM
Features: Cartridge style (Requires a machined cavity or housing for installation). Continuous duty. Fast response. Low cost. Adjustment Style: See table. Maximum Operating Pressure: 3000 PSI. Maximum Flow Rate: 10 GPM. Cartridge: Model RV1-10-*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Cartridge Type Direct-Acting Relief Valves Vickers RV1-10 Series To 10 GPM
Catalog Part No. Vickers Part No. Vickers Model (Cartridge Only) R1-10-S-0-30/ Adjustment Range (psi) 500-3000 Adjustment Type Seal Material Screw Buna-N Wt. 0.53 Price Each
C1BT33 565563 Note: Housing not included.
304

Relief Valves Direct-Acting Differential Poppet Type
Fluid Conveying
Features: Cartridge style (Requires a machined cavity or housing for installation). Contamination tolerant. Fast response. Adjustment Style: See table. Maximum Operating Pressure: 3600 PSI (CAUTION: Pressures over 3000 PSI require steel housing). Maximum Flow Rate: 20 GPM. Cartridge: Model RV3-10-*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Cartridge Type Direct-Acting Relief Valves Vickers RV3-10 Series To 20 GPM
Catalog Part No. Vickers Part No. 566688 Vickers Model RV3-10-S-0-3/ RV3-10-S-0-36/ Adjustment Range (psi) 50-300 600-3600 Adjustment Type Screw Screw Housing None None Seal Material Buna-N Buna-N Wt. 0.51 0.53 Price Each
C1ET93
C1BT34 565568
305

Relief Valves Direct-Acting Differential Poppet Type
Features: Cartridge style (Requires a machined cavity or housing for installation). Contamination tolerant. Fast response. Adjustment Style: See table. Maximum Operating Pressure: 5000 PSI (CAUTION: Pressures over 3000 PSI require steel housing). Maximum Flow Rate: 80 GPM. Cartridge: Model RV3-16-*, sold separately. Housing: Cavity size C-16-2, sold separately, see page 329 Cartridge Type Direct-Acting Relief Valves Vickers RV3-16 Series To 80 GPM
Catalog Part No. C1KA19 Vickers Part No. 02-175554 Vickers Model (Cartridge Only) RV3-16-S-0-35/ RV3-16-S-0-50/47 Adjustment Range (psi) 1200-3500 2000-5000 (Set at 4700) Adjustment Type Seal Material Screw Screw Buna-N Buna-N Wt. 1.63 1.60 Price Each
Fluid Conveying
C1EN53 565569 Note: Housing not included.
306

Relief Valves Pilot-Operated Poppet Type
Cartridge Type Pilot-Operated Poppet Type Relief Valves Vickers RV2-10 Series To 30 GPM
Fluid Conveying
Features: Cartridge style (Requires a machined cavity or housing for installation). Ideal for use as a service line relief where anti-cavitation make-up is required. Adjustment Style: See table. Maximum Operating Pressure: 5000 PSI (CAUTION: Pressures over 3000 PSI require steel housing). Rated Flow Range: 3 to 30 GPM. Cartridge: Model RV2-10-*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Cartridge Type Pilot-Operated Poppet Type Relief Valves Vickers RV2-10 Series To 30 GPM
Catalog Part No. Vickers Part No. 566212 Vickers Model RV2-10-S-0-35/ Adjustment Range (psi) 250-3500 Adjustment Type Screw Housing None Seal Material Buna-N Wt. 0.53 Price Each
C1FA75
307

Relief Valves Pilot-Operated Spool Type
Cartridge Type Pilot-Operated Spool Type Relief Valves Vickers RV5-10 Series To 30 GPM
Features: Cartridge style (Requires a machined cavity or housing for installation). Smooth and quiet. Continuous duty. Adjustment Style: See table. Maximum Operating Pressure: 5000 PSI (CAUTION: Pressures over 3000 PSI require steel housing). Maximum Flow Rate: 30 GPM. Cartridge: Model RV5-10-*, sold separately. Housing: Cavity size C-10-2, sold separately, see page 329 Cartridge Type Pilot-Operated Spool Type Relief Valves Vickers RV5-10 Series To 30 GPM
Catalog Part No. C1FM79 C1KK46 C1AD24 C1FQ46 Vickers Part No. 02-164222 566246 02-164723 02-164209 Vickers Model RV5-10-S-0-20/12 RV5-10-S-0-35/ RV5-10-S-0-35/14.5 RV5-10-S-0-35/15 RV5-10-S-0-50/ Adjustment Range (psi) 100-2000 (Set at 1200) 250-3500 250-3500 (Set at 1450) 250-3500 (Set at 1500) 500-5000 Adjustment Type Screw Screw Screw Screw Screw Housing None None None None None Seal Material Buna-N Buna-N Buna-N Buna-N Buna-N Wt. 0.51 0.51 0.51 0.53 0.53 Price Each
C1BT35 565572
308

Cartridge Type Pilot-Operated Relief Valves Vickers RV5-16 Series To 80 GPM
Fluid Conveying
Features: Cartridge style (Requires a machined cavity or housing for installation). Smooth and quiet. Continuous duty. Adjustment Style: See table. Maximum Operating Pressure: 6000 PSI (CAUTION: Pressures over 3000 PSI require steel housing). Maximum Flow Rate: 80 GPM. Cartridge: RV5-16-* sold separately. Housing: Cavity C-16-2, sold separately, see page 329 Cartridge Type Pilot-Operated Relief Valves Vickers RV5-16 Series To 80 GPM
Catalog Part No. Vickers Part No. Vickers Model RV5-16-S-0-30/ Adjustment Range (psi) 500-3000 Adjustment Type Screw Housing None Seal Material Buna-N Wt. 0.79 Price Each
C1EN56 565854
309

3-Port Pilot-Operated Relief Valves Vickers CT & CS Series To 60 GPM & 120 GPM
Features: In-line mounting. Gauge port. Ventable. Smooth and quiet. Continuous duty. Adjustment Style: Adjustment knob with locking nut. Maximum Operating Pressure: 3000 PSI. Maximum Flow Rate: Standard Models: 60 gpm (3/4 & -12 size), 120 gpm (1-1/4 & -20 size). High Flow Models: 90 gpm (3/4 & -12 size), 180 gpm (1-1/4 & -20 size). 3-Port Pilot-Operated Relief Valves Vickers CT & CS Series To 60 GPM & 120 GPM
Catalog Vickers Part No. Part No. C1BW11 590536 C1BW12 590538 C1BW13 590540 C1BV99 590283 Vickers Model Adj. Range (psi) Inlet Port 3/4 NPT 3/4 NPT Outlet Port 3/4 NPT 3/4 NPT 3/4 NPT Gauge Port 7/16-20 St.Thd. O-Ring 7/16-20 St.Thd. O-Ring 7/16-20 St.Thd. O-Ring 7/16-20 St.Thd. O-Ring Vent Port Seal Matl. A (in) B (in) Wt. 8.59 8.57 Price Each
Fluid Conveying
CT-06-B-50 125-1000 CT-06-C-50 500-2000
9/16-18 St.Thd. Viton 5.64 3.76 O-Ring 9/16-18 St.Thd. Viton 5.64 3.76 O-Ring 9/16-18 St.Thd. Viton 5.64 3.76 O-Ring
CT-06-F-50 1500-3000 3/4 NPT
8.66
CT-10-F-30 1500-3000 1-1/4 NPT 1-1/4 NPT
9/16-18 St.Thd. Viton 6.18 4.88 14.58 O-Ring
310

Subplate/Manifold Mount Pilot-Operated Relief Valves Vickers CG2V-6/8 & CG5V-6/8 Series To 106 GPM
Fluid Conveying
Features: Close matching to application requirements from choice of four adjustment control ranges covering 44 to 5000 psi Electrical on/off load from solenoid controlled models Remote parallel control by other pilot valves connected to vent port High machine productivity resulting from full system flow being available for work output until system pressure is very close to valve setting Pressure override optimized without detriment to other performance parameters Excellent repeatability and stable performance from cartridge-type design of mainstage parts Low off-load power wastage International mounting interfaces Low installed cost and space requirement from high power/size ratios (more than double that of many conventional designs). Maximum Operating Pressure: 5000 PSI ports P & X. Port T 1500 PSI for CG5V models, 5000 PSI for CG2V models. Maximum Flow Rate: 53 GPM (Size 6 models), 106 GPM (Size 8 models). Temperature Range: -4F to 158F (petroleum oil). Recommended Filtration Level: ISO 4406 Cleanliness Level 19/17/14 or cleaner. Solenoid Connectors: page 333 (Required on models that use DIN 43650 connectors). Subplate/Manifold Mount Pilot-Operated Relief Valves Vickers CG2V-6/8 & CG5V-6/8 Series To 106 GPM
Catalog Part No. C1JM56 Vickers Part No. 615027 Vickers Model CG2V-8BW-10 Mounting (ISO 6264) Function Size 8 (AR-08-2-A) Relief Features 44-1000 PSI Adjustment Range, Screw Adjustment with Locknut Wt. 9.70 Price Each
311

Relief Valves Guided Piston Type
Guided Piston Relief Valves Fulflo V Series with Threaded Ports
Application: The sliding piston concept and internal design contours of FULFLO valves provide unique flow and stability characteristics for reliable performance without chatter. Unlike ordinary direct acting relief valves, FULFLO guided piston valves are less responsive to transient pressure surges thereby eliminating the tendency to pound, squeal or chatter. Quiet, stable, efficient performance is assured in both load regulation and system protection applications. FULFLO valves operate effectively with all types of liquids in the full range of viscosities including hydraulic oils, water, solvents and chemicals. Since the FULFLO relief valve is a flow-modulating device, pressure flow characteristics are completely different from spring loaded poppet or ball check valves. Both types remain substantially tight up to cracking pressure. When this pressure is exceeded, the conventional valve pops open with a pressure drop at very low flow and an exponential pressure rise as the flow increases. In contrast the FULFLO valve causes a pressure rise, over-pressure, as soon as flow starts; pressure increases almost proportionally with flow. Springs and areas on FULFLO valves are carefully designed to minimize this over-pressure. Note: FULFLO valves are not designed to be positive shut off, and will pass a minimal amount of leakage before the set pressure. FULFLO valves are NOT designed for use with air, gas or steam. Performance Charts: page 553 Guided Piston Relief Valves Fulflo V Series with Threaded Ports
Catalog Part No. C1FG22 Fulflo Model VJ-5-YS-190PSI Ports 1 NPT Rated Capacity (GPM) Body 25 Cast Iron Cast Iron Spring Piston Other AA O-Ring Features (in) 8.22 BB (in) CC (in) DD (in) Wt. 5.37 Price Each
507-YS (150-350 Hardened Buna-N Steel PSI) 707-XS Hardened (60-175 Buna-N Steel PSI)
2.28 2.28 2.06
C1EZ82
VJ-7-XS
1-1/2 NPT
80
11.06
2.69 2.69 2.88
13.49
312

Sandwich Valves NFPA Size D03 ISO 4401 Size 03 Vickers Sandwich Valves
Vickers Sandwich Valves NFPA-D03 Size Aluminum Valve Bodies Pressures to 3000 PSI
Features: Reduces System Space Requirements Reduce Cost Versatile and Easy to Install Linking and blanking plates are available to facilitate a variety of circuit designs and flexibility in applying these valves Rugged and Reliable Cartridges are accessible without removing valves from an assembled stack. Housings are assembled in a kit containing a locating pin, all necessary plugs and standard Viton seals. Construction: Aluminum (Housings, Blanking Plates, Linking Plates and Spacer Plates). Valve Cartridges: Screw-in valve cartridges. Maximum Operating Pressure: 3000 PSI. Temperature Range & Recommended Filtration: Refer to information on cartridge valve(s) selected. Seal Material: Viton o-rings are standard and are included along with locating pin to mount housings and plates to the NFPA-D03 surface (4ea -012 size o-rings). Bolt Kits: 10-24 grade 8 socket head cap screws lubricated and torqued to 63-80 lb.in. Bolt kits on page 328 Stud Rod & Nut Kits: Kit number 02-184932: 4ea 10-24 x 7 inch stud rods and stud nuts. Kit number 02-184933: 4ea 10-24 x 12 inch stud rods and stud nuts. Stud rods/nuts should be torqued to 40-53 lb.in. with threads lubricated.
Fluid Conveying
A323W Housing Kit
Typical Cartridges: Counterbalance valves on A & B cross piloted, CBV-1-10 Series page 193 . Pilot operated check valves on A & B cross piloted, POC1-10 Series A323W Housing Kit
Housing Height (in) 1.70
Catalog Part No. C1HY33
Vickers Vickers Part No. Model Cavity Qty & Size 02-185347 A323W 2ea C-10-3S
Typical Cartridges CBV*-10 (Counterbalance valves on A & B cross-piloted), POC1-10 (Pilot-operated check valves on A & B cross-piloted)
Wt. 1.21
Price Each
Cartridges for A323W Sandwich Valve Housing Kit

Catalog Part No. Part Number Description Counterbalance Cartridge, CBV1-10-C-0-A-30, 900-3000 PSI Adjustment Range, Cap over Adjusting Screw, Buna-N Seals, 4:1 Control Ratio Wt. 0.53 Price Each
C1AD25 02-171990
CBV1-10 Cartridge Specifications: page 193

313

Selector Valves Single, Double, 2-Wheel / 4-Wheel, Solenoid Operated
Single Selector Valves Cross VS Series
Cross VS Series hydraulic selector valves are manually operated, spool type, 3-way 2-position valves featuring cast-in metering notches for smooth operation. They provide an economical method of diverting flow to either of two hydraulic circuits and are available with a variety of actuators. Construction: High tensile strength cast iron body. Ground, plated and polished steel spool. Buna-N seals. Available Options: Actuator location port A or port B side. Knob, clevis or plain actuator (VS2 models). Knob, clevis, plain, handle or hydraulic pilot actuator (VS4 models). Manual spool action (VS2 models). Manual, spring return, 2-position detent or hydraulic pilot spool action (VS4 models). Front, bottom or both front and bottom inlet port location. 1/2 NPT or SAE-8 ports (VS2 models). 3/4 NPT, SAE-12 or SAE-16 ports (VS4 models). Single Selector Valves Cross VS Series
Catalog Part No. Nominal Flow Maximum Rating Operating Port Size (GPM) Pressure (psi) Price Each
Fluid Conveying
Cross Model
Features Standard Knob actuator port B side. Standard Manual spool positioning. Standard front inlet port location. Standard Knob actuator port B side. Standard Manual spool positioning. Standard front inlet port location. Standard Knob actuator port B side. Standard Manual spool positioning. Standard front inlet port location.
Dimensions (in) A=2.12 B=1.53 C=0.34 D=3.25 E=1.19 F=1.62 G=2.25 H=1.00 J=0.31 K=5.33 A=3.00 B=1.56 C=0.34 D=4.12 E=1.50 F=2.12 G=2.62 H=1.12 J=6.12 K=6.12 A=3.00 B=1.56 C=0.34 D=4.12 E=1.50 F=2.12 G=2.62 H=1.12 J=6.12 K=6.12
Wt.
C1GK85 VS2BKLF2
1/2 NPT
20
2500
3.24
C1GK86 VS4BKLF6
3/4 NPT
40
2500
7.19
C1GK87 VS4BKLF9
SAE-16
40
2500
6.67
314

Double Selector Valves Cross SD Series
Fluid Conveying
Cross SD Series hydraulic selector valves are manually operated, spool type, 6-way 2-position valves featuring cast-in metering notches for smooth operation. They provide an economical method of diverting flow to two separate hydraulic circuits or providing various types of multiple system operations in combination with other valves. Construction: High tensile strength cast iron body. Ground, plated and polished steel spool. Buna-N seals. Available Options: Actuator location port C or port D side. Knob, clevis, handle, plain or hydraulic pilot actuator. Manual, spring return, 2-position detent or hydraulic pilot spool action. Selector or Series/Parallel spool type. SAE-8, SAE-12, SAE-16, 3/4 NPT or 1 NPT ports. Double Selector Valves Cross SD Series
Catalog Part No. Nominal Flow Maximum Rating Operating Port Size (GPM) Pressure (psi) 3/4 NPT 40 2500 Price Each
Cross Model
Features Selector Spool. Optional Handle actuator port D side. Standard Manual spool positioning.
Wt. 9.70
C1GK53 SD4BALA4
315

2-Wheel / 4-Wheel Selector Valve Cross SD5 Series
The Cross SD5 2-wheel / 4-wheel selector valve has been specifically designed for use with hydrostatic transmissions and permits selection of either 2-wheel (transport mode) or 4-wheel (work mode) drive positions. Specifications: Maximum working pressure: 5000 PSI. Maximum shock & surge pressure: 6000 PSI. Maximum flow capacity: 50 GPM. Construction: High tensile strength cast iron body. Ground, plated & polished steel spool. Buna-N seals. Available Options: Ports - 1/2 NPT, SAE-8, SAE-12, SAE-16. Actuator - Handle, Knob, Clevis, Pilot, 12VDC Solenoid. Application Note: When in 2-wheel drive, supercharge oil is supplied to the non-driving motors, preventing cavitation. When operating in 2-wheel drive for long periods of time, it may be necessary to occasionally shift into 4-wheel drive in order to cool the non-driving wheel motors. 2-Wheel / 4-Wheel Selector Valve Cross SD5 Series
Catalog Actuator Part No. Cross Model Location C1EP17 SD5BUBA7 Port D Side Actuator Option Hydraulic Pilot End Cap Option Spring Return Spool Type 2-Wheel / 4-Wheel Selector Port Size SAE-16 Wt. 10.00 Price Each
316

Solenoid-Operated Selector Valves Walvoil DFE Series
Fluid Conveying
Available Ways: DFE052: 2-3-6-8-way. DFE20: 3-6-way. Nominal Flow Rating: DFE052: 16 GPM. DFE20: 37 GPM. Maximum Operating Pressure: 2900 PSI (without drain), 4600 PSI (with optional drain). Internal Leakage: DFE052: 0.43 in/min maximum at 1450 PSI differential pressure. DFE020: 0.92 in/min maximum at 1450 PSI differential pressure. Fluid Temperature Range: -4F to 176F (standard Buna-N seals), -4F to 212F (optional Viton seals). Ambient Temperature Range: -40F to 140F. Viscosity: 80 to 400 SSU Operating, 70 SSU Minimum, 1950 SSU Maximum. Maximum Level of Contamination: ISO 4406 19/16. Note: Performance data measured with mineral oil of 215 SSU viscosity at 104F. Solenoid-Operated Selector Valves Walvoil DFE Series
Catalog Part No. C1KL99 Walvoil Model FVL12A270034 Ports 6 Nominal Flow Rating 16 GPM Spool Type 6-way, 2-pos, closed crossover Spool Positioner Spring return to position 1 Coil 12VDC Other Features Wt. 4.40 Price Each
317

Slip-In Cartridge Valves
Slip-In Cartridge Valves To ISO 7368 (DIN 24342)

Detailed information on the entire line of Vickers Slip-In Cartridge Valves can be found in Literature ID # 5043.00/EN/0499/A. Please contact us for application assistance or to request a copy of this publication.
Slip-In Cartridge Valves To ISO 7368 (DIN 24342)

Catalog Vickers Part Part No. No. C1GN27 02-156365 Vickers Model CVI-25-D10-2-H-40 Key D10 Description Relief Insert, 1:1 Area Ratio, Size 25, 45 PSI Cracking Pressure Wt. 0.73 Price Each
318

Stack Valves NFPA Size D03 ISO 4401 Size 03 Vickers SystemStak Valves
Vickers SystemStak Valves NFPA-D03 Size Flows to 16 GPM Pressures to 4500 PSI
Features: Save space & installation time. Reduce potential leaks. Standard interface. Rugged design with large flow passages, high pressure and high flow ratings. Construction: Ductile iron (spheroidal graphite) body (NFPA fatigue proof rated at 4500 PSI). Hardened steel internal parts. Aluminum nameplates. Standard Viton seals. Available Functions: Relief, Counterbalance, Sequence, Pressure Reducing, Direct Check, Pilot-Operated Check, Flow Control. Maximum Operating Pressure: 4500 PSI. Ambient Temperature Limits: -4F to 176F. Fluid Temperature Limits: Petroleum Oil: -4F to 176F. Water Base Fluids: 50F to 129F. Filtration Requirements: Up to 3000 PSI: ISO level 20/16. Over 3000 PSI: ISO level 18/14. Bolt Kits: 10-24 grade 8 socket head cap screws lubricated and torqued to 63-80 lb.in. Bolt kits on page 328 Dimensions & Technical Information: page 554 Size D03 Subplates & Manifolds: page 336
Fluid Conveying
Vickers SystemStak Relief Valves NFPA-D03 ISO 4401-03

General Description: These pilot-operated adjustable pressure relief valves limit the maximum pressure in the line(s) controlled by the integral relief valve elements. Pressure adjustment of screw & locknut or control knob (with or without keylock) are available. Stacking Height to add for Bolt Length: 1.57 inches.

Catalog Part No. C1JA16 C1DZ90 Vickers Part No. 694419 871702 Vickers Model DGMC-3-PT-CW-41 DGMC2-3-AT-GW-BT-GW-41 Key A C Type Single Relief Function P to T Pressure Adjustment Adjustment Gauge Range (psi) Type Port 145-2900 75-4500 Screw & Locknut Screw & Locknut No No Wt. 2.90 3.00 Price Each
Dual Relief A to T, B to T
319

Vickers SystemStak Pressure Reducing Valves NFPA-D03 ISO 4401-03

General Description: The flow path is normally open and is closed as the pilot pressure exceeds the setting of the valve. Excessive pressure in the reduced pressure line is prevented by a pressure relieving function. Pressure adjustment options of screw & locknut or control knob (with or without keylock) are available. Stacking Height to add for Bolt Length: 1.57 inches.
Vickers SystemStak Pressure Reducing Valves NFPA-D03 ISO 4401-03

Catalog Vickers Part No. Part No. C1DZ89 C1CA50 870039 870040 Vickers Model DGMX2-3-PP-BW-S-40 DGMX2-3-PP-CW-S-40 Key A A Function Pressure Reduced in P Piloted from P Pressure Reduced in P Piloted from P Pressure Adjustment Adjustment Adjuster Gauge Range (psi) Type Location Port 51-1000 145-2000 Screw & Locknut Screw & Locknut B Port End B Port End SAE-4 SAE-4 Wt. 2.90 Price Each
Fluid Conveying
2.90
Vickers SystemStak Check Valves NFPA-D03 ISO 4401-03

General Description: These valves allow free flow in one direction in the line in which the check valve element(s) is (are) located. Flow in the opposite direction is not possible. Stacking Height to add for Bolt Length: 1.57 inches.
320

Vickers SystemStak Check Valves NFPA-D03 ISO 4401-03
Catalog Part No. C1JL49 Vickers Part No. 02-138605 Vickers Model DGMDC-3-Y-PM-41 Key A Function Check in P, Free Flow towards Work Port Cracking Pressure (psi) 36.0 Wt. 2.08 Price Each
Vickers SystemStak Pilot-Operated Check Valves NFPA-D03 ISO 4401-03

General Description: These valves provide pilot-operated check functions in one or both work ports, with pilot pressure coming from the opposite side. An optional 10:1 decompression feature is available. Stacking Height to add for Bolt Length: 1.57 inches.
Fluid Conveying

Catalog Part No. C1FF82 Vickers Part No. 870024 Vickers Model DGMPC-3-ABK-BAK-41 DGMPC-3-ABK-41 Key A B Function Dual Pilot Check Single Pilot Check in A Piloted from B Pilot Ratio 3:1 3:1 Cracking Pressure (psi) 14.5 14.5 Wt. 2.28 2.13 Price Each
C1BY42 694400
Vickers SystemStak Flow Control Valves NFPA-D03 ISO 4401-03

General Description: These valves regulate flow by means of an adjustable orifice which is not pressure compensated, and flow through the valve is entirely dependent upon pressure drop at any particular setting of the orifice. Single and Dual work port models with integral reverse flow checks are available in both meter-our and meter-in styles. Single P port models are available without the reverse flow check. Stacking Height to add for Bolt Length: 1.57 inches.
321

Catalog Part No. Vickers Part No. Vickers Model DGMFN-3-Y-A2W-B2W-41 DGMFN-3-X-A2W-B2W-41 Key A B Function Dual Meter Out of Work Ports Dual Meter In to Work Ports Control Needle Type Standard Standard Adjustment Type Screw & Locknut Screw & Locknut Wt. 2.41 2.40 Price Each
C1BY43 694412 C1BY44 694414
322

Vickers SystemStak Valves NFPA-D05 Size Flows to 32 GPM Pressures to 4500 PSI
Features: Save space & installation time. Reduce potential leaks. Standard interface. Rugged design with large flow passages, high pressure and high flow ratings. Construction: Ductile iron (spheroidal graphite) body (NFPA fatigue proof rated at 4500 PSI). Hardened steel internal parts. Aluminum nameplates. Standard Viton seals. Available Functions: Relief, Counterbalance, Sequence, Pressure Reducing, Direct Check, Pilot-Operated Check, Flow Control. Maximum Operating Pressure: 4500 PSI. Fluid Temperature Limits: Dependent on type of valve (See limits in individual group information). Filtration Requirements: ISO level 19/17/14. Mounting Bolt Options: Size 05 SystemStak valves may be mounted with either bolt extender kits or standard 1/4-20 grade 8 socket head cap screws. (Threads lubricated Bolt Extender torque is 100-130 lb. in. Threads lubricated standard socket head cap screw torque is 112 lb.in. maximum). Bolt Extenders: page 328 Bolt Kits: page 328 Dimensions & Technical Information: page 559 Size D05 Subplates & Manifolds: page 338
Fluid Conveying

General Description: These two-stage valves limit system pressure by directing flow to tank or the opposite work port when system pressure reaches the valve setting. Pressure control may be obtained in A, B, A & B, or P port, and pilot flow may be internally or externally drained, depending on model type. Any back pressure is additive to valve setting. Standard adjustment is a screw with locknut (other options available). External remote control/vent options are available. Fluid Temperature Limits: 32F to 180F. Stacking Height: 1.97 inches (Single & Dual Reliefs), 2.36 inches (Crossover Reliefs).
Vickers SystemStak Relief Valves NFPA-D05 ISO 4401-05 Indexes & Technical Information
Catalog Part No. C1HJ81 Vickers Part No. 867315 Vickers Model DGMC-5-PT-GW-S-30 Key A Type Single Relief Function Pressure Limited in P Port Pressure Adjustment Adjustment Gauge Range (psi) Type Port 60-4500 Screw & Locknut SAE-4 Wt. 7.17 Price Each
323


General Description: These valves provide pilot-operated check functions in one or both work ports, with pilot pressure coming from the opposite side. An optional 20:1 decompression feature is available. Fluid Temperature Limits: 32F to 180F. Stacking Height: 1.97 inches.

Catalog Part No. C1JE98 Vickers Part No. 867364 Vickers Model DGMPC-5-ABK-BAK-30 Key A Function Dual Pilot-Operated Check Pilot Ratio Standard Cracking Pressure (psi) 15 Wt. 6.47 Price Each
Fluid Conveying

General Description: These valves regulate flow by means of an adjustable orifice which is not pressure compensated, and flow through the valve is entirely dependent upon pressure drop at any particular setting of the orifice. Single and Dual work port models with integral reverse flow checks are available in both meter-our and meter-in styles. Single P and T port models are available without the reverse flow check. Fluid Temperature Limits: 32F to 180F. Stacking Height: 1.97 inches. Vickers SystemStak Flow Control Valves NFPA-D05 ISO 4401-05
Catalog Part No. C1CA45 Vickers Part No. 867332 Vickers Model DGMFN-5-Y-A2W-B2W-30 Key A Function Dual Meter Out of Work Ports Control Needle Type Standard
Adjustment Type Screw & Locknut
Wt. 6.86
Price Each
324

System Accessory Valves Air Bleed Valves, Shuttle Valves, Velocity Fuses
Shuttle Valves Brand SHV Series
Features: Cast iron body. Buna-N O-rings. Hardened steel ball for wear resistance, greater durability and minimal leakage. Application: Has two inlets and one outlet. Accepts flow from the inlet with higher pressure and routes it to the outlet, while keeping the inlet flows isolated from one another. 30 micron filtration recommended. Shuttle Valves Brand SHV Series
Catalog Part No. Brand Model Port Size 1/4 NPT Body Material Cast Iron Maximum Operating Pressure (PSI) 3,000 Flow Rating (GPM) 5.0 Peak Pressure Drop (PSI) 50 Wt. 0.50 Price Each
Fluid Conveying
C1GK55 SHV25
325

System Accessory Valves Air Bleed Valves, Shuttle Valves, Velocity Fuses
Shuttle Valves Vickers DSV2-8 Series
Description: The DSV2-8-B is a direct acting, ball type, shuttle valve. Operation: The shuttle valve senses the higher of two pressures at port 3 or port 1 and directs it to port 2. Rated Flow: 6 GPM. Maximum Operating Pressure: 3500 PSI typical application pressure, 3500 PSI cartridge fatigue pressure (infinite life). CAUTION: Pressures over 3000 PSI require steel housing. Temperature Range: -40F to 248F (Extreme Limits). Recommended Filtration Level: ISO 4406 Cleanliness Level 18/16/13 or cleaner. Internal Leakage: 5 drops/min. maximum @ 3500 PSI (Between ports 2 and 1, and 2 and 3. Typical with fluid at 105 SSU and 120F). Cartridge: Model DSV2-8-*, sold separately. Housing: Cavity size C-8-3, sold separately, see page 330 Shuttle Valves Vickers DSV2-8 Series
Catalog Part No. Vickers Model Housing DSV2-8-B-0 Seals None Buna-N Wt. 0.15 Price Each
C1FQ51 02-171239
Parts for Vickers DSV2-8 Shuttle Valve Cartridges

Catalog Part No. C1FV34 Part Number 02-160755 Buna-N Seal Kit for C-8-3 Cartridge Description Wt. 0.01 Price Each
326

Truck Valves
Truck Valves
Typical Application: Used extensively in the trucking industry for cooling and fuel line applications. Material: Forged brass bodies, steel handles, Buna-N o-ring. Pressure Rating: 200 PSI Maximum. Temperature Range: -40F to 250F. Conformance: Designed for trucking use. Not intended for natural gas, LPG, nuclear or aircraft applications. Truck Valves
Catalog Part No. C1JE95 Eaton Model 7508 Description 1/2 Female NPT x 1/2 Male NPT Wt. 0.45 Price Each
Fluid Conveying
327

Bolt Kits & Bolt Extenders
Valve Mounting Bolt Kits

Valve Mounting Bolt Kits
Catalog Part No. Vickers Part No. Vickers Model BK590716 BK870017 BK466851 BK466853 BKDG01-633 BK255654 BK464125M BK466837M Bolt Qty 4 4 4 4 4 4 4 4 Bolt Size 10-24 x 1-1/4 10-24 x 2-3/4 10-24 x 3-1/2 10-24 x 4-5/16 1/4-20 x 1-1/2 1/4-20 x 3-1/2 M5 x 70 M5 x 80 Wt. 0.05 0.10 0.12 0.13 0.10 0.43 0.10 0.12 Price Each
C1BW14 590716 C1CA49 870017 C1BQ65 466851 C1BQ66 C1JD87 C1KK36 C1HZ89 466853 255654 464125 466837 C1BH34 255633
A: Bolt length in directional valve, blanking plate, crossover plate, etc. DG4V-3 & DG4V-3S Valves: A = 0.86 inches DG4S4-01 Valves: A = 1.13 inches DG5S-8 & DG5V-8 Valves: A = 1.69 inches B: Height of intermediate valve stack, if any. C: Depth of thread engagement in subplate or manifold. 10-24 Bolt Threads: 0.39 inch required engagement 1/4-20 Bolt Threads: 0.37 inch required engagement 1/2-13 Bolt Threads: 0.81 inch required engagement L: Required bolt length.
Fluid Conveying
SystemStak Bolt Extender Kits (NFPA D05 Size Valves)

Miscellaneous Products SystemStak Bolt Extender Kits (NFPA D05 Size Valves)
Catalog Part No. C1DX61 Vickers Part No. 525744 Vickers Model BKE-4-50M Extender Qty 4 SystemStak Valve Height (in) 1.97 Wt. 0.18 Price Each
328

Cartridge Valve Housings
Vickers 2-Way Cartridge Valve Housings C-*-2 Cavity Size Models

Catalog Part No. C1ZZ83 C1BT57 C1AD20 Vickers Model 02-160731 566201 (20055) 02-161382 (20056A) Cavity C-8-2 C-10-2 C-10-2 C-10-2 C-10-2 C-10-2 C-12-2U C-16-2 C-16-2 C-20-2 Type FR STD STD STD STD STD FR STD STD STD Port 1 SAE-6 1/4 NPT 3/8 NPT SAE-6 1/2 NPT SAE-8 SAE-12 3/4 NPT SAE-12 SAE-16 Port 2 SAE-6 1/4 NPT 3/8 NPT SAE-6 1/2 NPT SAE-8 SAE-12 3/4 NPT SAE-12 SAE-16 A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) 2.0 2.0 2.0 2.0 2.0 2.0 3.50 3 3 3.5 0.75 0.75 0.75 0.75 0.75 0.75 1.75 2.00 2.00 2.00 2.00 2.00 2.00 3.50 0.34 0.34 0.34 0.28 0.28 0.28 0.28 0.28 0.28 0.50 0.13 0.61 1.50 1.25 1.25 1.25 1.25 1.25 2.00 Wt. 0.50 0.38 0.37 0.38 0.35 0.36 1.99 1.25 1.23 2.42 Price Each
Fluid Conveying
0.50 0.125 0.75 0.50 0.125 0.75 0.50 0.125 0.75 0.50 0.125 0.75 0.50 0.125 0.75 1.00 0.75 0.75 0.85 0.50 0.16 0.16 0.16 2.00
566151 C1BT51 (20057A) 566189 C1BT56 (20054) 566150 C1BT50 (20058AA8) C1HL18 02-160645 has undercut
C1AD22 02-161405 (20458) C1BT49 566149 (20460AA8) C1ET92 566409
1.125 3.00 1.125 3.00 1.35 3.50
1.00 1.875 1.00 1.875 1.45 2.70
Types: STD (Standard light-duty aluminum 3000 psi maximum) FR (Fatigue-rated aluminum 3000 psi maximum) S (Ductile Iron 5000 psi maximum)
329

Vickers 3-Way Cartridge Valve Housings C-*-3* Cavity Size Models
Vickers 3-Way Cartridge Valve Housings C-*-3* Cavity Size Models

Catalog Part No. Vickers Model 566275 (20196) 566413 (30472A8) Cavity C-8-3 C-10-3 C-10-3S C-10-3 C-10-3S C-12-3S Type FR STD STD STD FR FR Port 1 SAE-6 3/8 NPT SAE-6 SAE-6 SAE-8 SAE-12 Port 2 SAE-6 3/8 NPT SAE-6 SAE-6 SAE-8 SAE-12 Port 3 SAE-6 3/8 NPT SAE-6 SAE-6 SAE-6 SAE-6 A (in) C (in) E (in) F (in) G (in) H (in) 2.50 2.62 0.51 0.13 0.61 1.17 Wt. 0.86 0.56 0.85 0.65 Price Each
Fluid Conveying
C1AD16 02-160742 C1BT58 C1EX76
2.50 2.625 0.50 0.125 0.75 1.375 2.50 2.625 0.50 0.125 0.75 1.375 2.50 2.625 0.50 0.125 0.75 1.375 3.00 3.50 3.00 4.00 0.75 0.50 0.37 0.50 0.66 0.91 1.32 1.66
566162 C1BT54 (20197AA8) C1FP96 C1FQ53 876712 (23112A8) 02-178269 (31106A8)
1.50 1.80
330

Vickers 4-Way Cartridge Valve Housings C-*-4 Cavity Size Models Fluid Conveying
Catalog Part No. C1FE80 Vickers Model 566190 (20206BA8) Cavity C-10-4 C-10-4 Type STD STD Port 1 Port 2 Port 3 Port 4 A (in) C (in) E (in) F (in) G (in) H (in) 3.25 0.375 0.125 0.75 1.375 3.25 0.375 0.125 0.75 1.375 Wt. 0.78 0.79 Price Each
3/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT 2.50 SAE-6 SAE-6 SAE-6 SAE-6 2.50
C1BT53 566161 (20207BA8)
331

Cartridge Valve Coils
Vickers Cartridge Valve Coils
Vickers Cartridge Valve Coils

Catalog Part No. Vickers Part No. C1JY62 C1JY63 300AA00121A 300AA00122A Vickers Model MCSCH012DG000010 MCSCH024DG000010 SC024SPJ00 SC120APJ00 MCSCJ115AG000010 MCSCJ230AG000010 SC240APJ00 SC012DPJ00 MCSCJ012DG000010 MCSCJ012DW0B0010 SC024DPJ00 MCSCJ024DG000010 MCSCJ024DW0B0010 MCSCP024DG000010 MCSCS012DQ000010 SC024DGS00 Series H Series 26 Watt H Series 26 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt J Series 20 Watt P Series 23 Watt S Series 20 Watt S Series 16 Watt Voltage 12VDC 24VDC 24VAC 120VAC 120VAC 230VAC 240VAC 12VDC 12VDC 12VDC 24VDC 24VDC 24VDC 24VDC 12VDC 24VDC Connector DIN 43650 DIN 43650 1/2 NPT Conduit 1/2 NPT Conduit Full Bridge Rectifier DIN 43650 DIN 43650 1/2 NPT Conduit DIN 43650 Flying Lead 1/2 NPT Conduit DIN 43650 Flying Lead DIN 43650 1/4" Spade DIN 43650 0.34 0.30 0.34 Full Bridge Rectifier Full Bridge Rectifier Other Features Price Wt. Each
Fluid Conveying
0.60 0.50 1.00 1.00 0.50 0.51 0.75 1.00
C1AD35 02-178104 C1AD36 02-178106 C1JY60 C1JY61 C1AD37 C1JY58 C1KJ80 C1JY59 C1KJ81 C1KJ79 C1KJ78 C1JL52 300AA00085A 300AA00086A 02-178109 300AA00081A 300AA00095A 300AA00082A 300AA00096A 300AA00042A 300AA00009A 02-160691
1/2 NPT Conduit Full Bridge Rectifier
C1AD31 02-178078
0.61 0.60 2.00 0.50
C1AD32 02-178079
Protection of Internally Rectified AC Coils: The rectifiers used in AC coils may require protection from high voltage surges in some electrical circuits containing highly inductive or capacitive components. These include certain types of motors, solenoids, relays and transformers. Protection is simple and inexpensive. It consists of installing a commercially available voltage surge suppressor like the GE MOV Varistor V130LA20A for 115VAC or the V250LA20A for 230VAC across the AC line supplying the rectified components. A single suppressor will normally protect all of the rectified components in the circuit. (See circuit diagram above. No inductive or capacitive loads can be installed between the surge suppressor and rectified valves).
332

Solenoid Valve Connectors
DIN 43650 / ISO 4400 Solenoid Connectors Canfield Series 5000 Strain Relief Style
Connector for solenoid valves using the DIN 43650 / ISO 4400 specification. This standard permits industry interchangeability and has been embraced by the solenoid valve industry worldwide. Features: Cable outlet can be assembled in 90 increments. Indicator lights and pre-wired options are available. Available in Black, Gray or Translucent (for models with lights). Maximum Rated Voltage: 300 VDC / 250 VAC @ 50/60 Hz. Maximum Cable Diameter : 0.41 inches (See table for cable diameter range). Maximum Current Rating: 10 amps. Maximum Rated Temperature for Gasket: Nitrile gasket -13F to 194F. Silicone gasket -40F to 257F. Environmental Rating: Nema Type 4 and IP65 dust tight and water resistant. Normal Polarity: 1 = Positive. 2 = Negative.
Fluid Conveying
DIN 43650 / ISO 4400 Solenoid Connectors Canfield Series 5000 Strain Relief Style
Wire Catalog Length Part No. Canfield Model Ground (ft) C1BS52 5100-10900 C1FK20 5103-1090000 Down Down --Lights -6-48 VAC/VDC 50/60 Hz Gasket Material Nitrile Nitrile Contacts 2+Ground 2+Ground Housing Color Black Translucent Wire Type --Cable Dia. (in) 0.236 to 0.315 0.315 to 0.394 Wt. 0.25 0.05 Price Each
333

All-Molded DIN Solenoid Connectors Canfield Series 5J

The Canfield Series 5J all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile 90 interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. Maximum Rated Voltage: 250VAC 50/60 Hz, 300VDC. Maximum Rated Current: 10 amps (ISO and Mini), 6 amps (Sub Micro). Ambient Temperature Rating: -13F to 176F. Environmental Rating: IP67 and NEMA 6, dust tight and water resistant. Cable Conductor Colors: White black & green (US), brown blue & yellow/green (European). Conductor Wire Size: 18 gauge (ISO & Mini), 20 gauge (Sub Micro). All-Molded DIN Solenoid Connectors Canfield Series 5J
Catalog Part No. Canfield Model Cord Connector Length Type (ft) ISO DIN 43650 6 ft Contacts 2 + Dual Ground Operating Suppression Lights Voltage Type -None No Wire Option US Housing Color Black Wt. 0.32 Price Each
C1HW97 5J664-000-US0A
334

MINI Solenoid Connectors Canfield Series 5000

The Canfield Connector field wireable MINI solenoid valve connector is a high quality interconnection device for use with solenoid valves and pressure switches. The connector features a PG9 strain relief, 3/8" or 1/2" conduit wire pass through, all with screw terminals for wire connections. The MINI accommodates wire from .240" to .410" diameter as a standard with an AWG of 14 maximum. Environment resistance of NEMA 4 / IP 65 along with versions which are CSA approved ensure long trouble free service. Current maximum of 10 Amps and the temperature rating of -40 to +125C encompasses most applications. The interface is an industry standard. Features: Cable outlet can be assembled in 180 increments. Indicator lights and pre-wired options are available. Available in Black, Gray or Translucent (for models with lights). Maximum Rated Voltage: 300 VDC / 250 VAC @ 50/60 Hz. Maximum Cable Diameter : Strain Relief - 0.240 to 0.310 inches max. Conduit - 0.410 inches max. 14 AWG max conductor wire. Maximum Current Rating: 10 amps. Maximum Rated Temperature for Gasket: Nitrile gasket -13F to 194F. Silicone gasket -40F to 257F. Environmental Rating: Nema Type 4 and IP65 dust tight and water resistant. Normal Polarity: 1 = Positive, High. 2 = Negative, Neutral
Fluid Conveying
MINI Solenoid Connectors Canfield Series 5000

Wire Catalog Length (ft) Part No. Canfield Model Ground C1HZ99 5100-1030000 Down -Lights -Gasket Material Connector Type Nitrile 1/2 NPT Housing Color Black Wire Type -Cable Dia. (in) Wt. 0.03 Price Each
335

Subplates, Manifolds & Accessories
Side Ported Subplates NFPA D03 - ISO 4401 Size 03
Side Ported Subplates NFPA D03 - ISO 4401 Size 03

Catalog Part No. C1CG87 C1CG88 Daman Model A-D03-SP-S-6P A-D03-SP-S-6S Material Aluminum Aluminum Pressure Rating (psi) 3000 3000 Port Location Side Side Port Threads 3/8 NPT SAE-6 A B Wt. 0.23 0.23 Price Each
1.00 2.50 1.00 2.50
Fluid Conveying
Subplate Mounting Hardware Included: (2) 1/4-20 x 7/8 Socket Head Cap Screws
Dual Ported Subplates NFPA D03 - ISO 4401 Size 03

Catalog Part No. C1JF14 C1EK42 Daman Model AD03SPSB6S AD03SPSB8S Material Aluminum Aluminum Pressure Rating (psi) 3000 3000 Port Location Side P-T-A-B, Bottom P-T Side P-T-A-B, Bottom P-T Port Threads SAE-6 SAE-8 A B C Wt. 1.12 1.80 Price Each
1.50 2.50 3.44 2.00 2.75 3.75
Subplate Mounting Hardware Included: (2) 1/4-20 x 1-1/2 Socket Head Cap Screws. (2) SAE-6 Hex Socket Plugs.
336

Bottom Ported Subplates NFPA D03 - ISO 4401 Size 03
Bottom Ported Subplates NFPA D03 - ISO 4401 Size 03

Catalog Part No. C1BQ64 Vickers Part No. 466731 Vickers Model DGVM-3-10S Material Cast Iron Pressure Rating (psi) 3600 Port Location Bottom Port Threads SAE-8 Wt. 3.03 Price Each
Fluid Conveying
Parallel Circuit Manifolds NFPA D03 - ISO 4401 Size 03

Catalog Part No. Daman Model Material Aluminum Pressure Number Valve Gauge Rating of Port (psi) Stations Spacing 3000 2 2.13 Yes Port Threads and Options A Wt. 3.95 Price Each
C1CG84 A-D03-P-02-2-P
1/2 NPT P & T, 3/8 NPT A & 4.25 B, 1/4 NPT Gauge Port SAE-10 P & T, SAE-8 A & B, SAE-6 Gauge Port. With 6.38 Relief Cavity (C-10-2 Common Cavity, P in Nose)
C1JN34
A-D03-P-03-2-S/C
Aluminum
3000
2.13
5.39
Manifold Mounting Hardware Included: (8) 5/16-18 x 5/8 Hex Head Cap Screws and (2) Steel Brackets.
337

Parallel Circuit Cover Plates NFPA D03 - ISO 4401 Size 03
Parallel Circuit Cover Plates NFPA D03 - ISO 4401 Size 03 Pneumatic Power & Control
Catalog Part No. C1CG83 Daman Model A-D03-CP-P Material Aluminum Pressure Rating (psi) 3000 Gauge Port (P) No Wt. 0.23 Price Each
Cover Plate Mounting Hardware Included: (4) 10-24 x 1 Socket Head Cap Screws, (4) -012 Viton 75 durometer O-Rings and (1) 0.12 dia x 0.25 long Locating Pin.
Fluid Conveying

Catalog Part No. Daman Model Material Aluminum Pressure Rating (psi) 3000
Port Location Side P-T-A-B, Bottom P-T
Port Threads SAE-8
Wt. 2.49
Price Each
C1CG90 A-D05-SP-SB-8S
Subplate Mounting Hardware Included: (2) 3/8-16 x 1-1/2 Socket Head Cap Screws. (2) SAE-8 Hex Socket Plugs.
338


Catalog Part No. C1GL55 Daman Model A-D05-P-02-3-S/C Material Aluminum Pressure Number Valve Gauge Rating of Port (psi) Stations Spacing 3000 2 3.25 Yes Port Threads and Options A Wt. 7.25 Price Each
SAE-12 P & T, SAE-8 A & B, SAE-6 Gauge Port. With 6.50 Relief Cavity (C-10-2 Common Cavity, P in Nose)
Manifold Mounting Hardware Included: (8) 5/16-18 x 5/8 Hex Head Cap Screws and (2) Steel Brackets.
Fluid Conveying
339

Electronic Control Components
Power Plugs For Proportional Valves Vickers EHH-AMP-702-D/E/J/K 10 Series

Description: Note: The newer 20 Series Power Plug is the current design and has additional features. Designed for use with non-feedback valves, these power plugs conform to the DIN 43650/ISO 4400 interface and include an integral amplifier and necessary adjustment potentiometers. This combination offers low cost solutions to many hydraulic control applications requiring proportional control. Features: Integral amplifier provides essential functions for control of proportional valves. Fully short-circuit and reverse-polarity protected. Application: Primary applications are in the control of directly operated, non-feedback proportional valves where the cost of more sophisticated electronic controls can be avoided. For Use With Valves: KDG4V-3(S)-H*-6*, KTG4V-3(S)-H*-6*, KDG4V-5-H*-3*, KTG4V-5-H*-3*. Note: Vickers publication GB-2115C provides the additional technical information necessary for proper application of these power plugs. Contact us for technical assistance or to request a copy.
Power Plugs For Proportional Valves Vickers EHH-AMP-702-D/E/J/K 10 Series

Catalog Part No. C1EV31 Vickers Part No. 02-326010 Vickers Model EHH AMP 702 D 10 Type D Description Controlled with 0-10 Volt command signal, 50ms to 600ms adjustable ramp time. Wt. 0.22 Price Each
340
Hydraulic Filters & Accessories

Category Page 342 342 343 344 346 348 349 350 351 352 354 355 356 357 358 359 360 Hydraulic Power & Control Stauff TFS Series / Flow Ezy P Series To 3 Inch NPT & 150 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff TMF Series Tank Mounted To 4 Inch NPT & 100 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Suction / Return Filters Stauff SAF07/11 Series Spin-On To 6 GPM Suction To 25 GPM Return . . . . . . . . . . . . . . . . . . . . . . . Stauff SSF-120/160 Series Spin-On To 12 GPM Suction To 60 GPM Return . . . . . . . . . . . . . . . . . . . . Stauff SSF-24/25 Series Spin-On To 35 GPM Suction To 120 GPM Return . . . . . . . . . . . . . . . . . . . . . Return Filters Vickers OFRS-25 Series Spin-On To 25 GPM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers OFRS-60 Series Spin-On To 60 GPM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers HS22 Series Spin-On To 120 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff RTF48 Series In-Line To 100 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff RTF40 Series In-Tank To 100 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers HF4RT Series In-Tank To 120 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internormen TEF Series Return Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pressure Filters Vickers HF2P Series To 4000 PSI To 24 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff SF Series To 6000 PSI To 160 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internormen HP Series To 6000 PSI To 356 GPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Filter Carts Vickers Clean Cart Portable Filtering Transfer Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fluid Analysis Stauff Fluid Analysis Service Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Information Dimensions, Pressure Drop Curves Filter Sizing Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff SAF07/11 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff SSF24/25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff SSF120/160 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff RFT40 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stauff RF014-RF130 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers HF4RT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers HS22 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers OFR-60 & OFR-120 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers OFRS-25 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers OFRS-60 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers HF2P Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vickers OFP Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
563 564 566 567 569 571 573 574 575 576 577 578 579
341

Hydraulic Filters
Suction Strainers To 3 Inch NPT & 100 GPM Stauff Series SUS
Features: Nylon head (Most models). Aluminum head (Certain Stauff models, see table). Cleanable. Standard 100 mesh (150 micron) pleated stainless steel wire screen epoxy-bonded to head. Application: Used submerged in reservoir to protect hydraulic pumps from larger solid contaminants. An access opening should be provided so strainer can be removed for cleaning. Strainers are usually mounted horizontally with the top of the strainer at least 3 inches below the lowest oil level (to prevent cavitation). (For larger sizes use 1-1/2 pipe diameters instead of 3 inches). Suction Strainers To 3 Inch NPT & 100 GPM Stauff Series SUS
Catalog Part No. C1ZS73 C1LA11 C1LA12 C1ZS69 Stauff Model SUSP088N20F1401250 SUS-P-102-N24F SUS-P-102-N32F-2 SUSP131N48F2721250 Size 1 NPT 1-1/4 NPT 1-1/2 NPT 2 NPT 3 NPT Flow Capacity (GPM) 10 20 50 50 100 Mesh Size 100 100 100 100 100 Screen Area Diameter Length (in) (in) Other Features (in) 110 162 340 340 500 2.60 3.40 3.40 3.40 5.90 5.50 5.50 10.00 10.00 10.70 Nylon Head Nylon Head Nylon Head Nylon Head Nylon Head Wt. 0.46 0.59 1.05 1.30 1.75 Price Each
C1KZ99 SUS-P-068-N16F-1
Fluid Conveying
Tank Mounted Suction Strainers To 4 Inch NPT & 100 GPM Stauff Series TMF
Features: Can be serviced from outside the reservoir. Iron head. Cleanable. Standard 100 mesh (150 micron) pleated screen epoxy-bonded to head. Application: Used submerged in reservoir to protect hydraulic pumps from larger solid contaminants. Strainers are usually mounted horizontally with the top of the strainer at least 3 inches below the lowest oil level (to prevent cavitation). (For larger sizes use 1-1/2 pipe diameters instead of 3 inches).
Tank Mounted Suction Strainers To 4 Inch NPT & 100 GPM Stauff Series TMF
Catalog Part No. C1LA15 Stauff Model TMF-25-0 Size 2 MP x 1-1/4 FP 2 MP x 1-1/4 FP 3 MP x 2 FP 4 MP x 3 FP Flow Capacity (GPM) 25 25 50 100 Mesh Size 100 100 100 100 Screen Screen Screen Area Diameter Length (in) (in) (in) 159 159 252 315 2.12 2.12 3.00 3.98 7.69 7.69 8.00 9.49 Optional Features No By-Pass 5 PSI By-pass No By-Pass No By-Pass 1.27 2.44 Wt. Price Each
C1ZS68 TMF-25-5 C1GF62 TMF-50-0 C1LA14 TMF-100-0
342

Hydraulic Filters
Spin-On Suction / Return Filters Stauff SAF07/11 Series To 6 GPM Suction To 25 GPM Return
Features: Spin-on element for quick replacement. Optional visual and electrical condition indicators. Light weight die-cast aluminum head. Elements available in both nominal rated paper and absolute rated synthetic media. Application: Designed for low pressure return line applications on mobile and industrial equipment. May be used as a suction filter if the 3 or 5 PSI by-pass spring is installed. Housing: High strength die-cast cast aluminum head. Buna-N seals compatible with all petroleum base fluids. Element: Throw-away metal spin-on canister. Assembly: Complete assembly consists of one Filter Head, one Element, optional Gauge, and optional bypass spring (25 psi bypass spring is standard). Nominal Flow Rating: 25 GPM. See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 565 Maximum Operating Pressure: 200 PSI. Operating Temperature Range: -25F to 212F. Dimensions & Pressure Drop Curves: page 564 Spin-On Suction / Return Filters Stauff SAF07/11 Series To 6 GPM Suction To 25 GPM Return
Nom Flow Rating
Fluid Conveying
Catalog Part No.
Stauff Model
Port Size
Element
Element By-Pass Length Spring Indicator None
Other Features All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged
Wt. 1.87
Price Each
C1GA29 SAF07154/SF6520
25 GPM 3/4 NPT
10 Micron Nominal 5.68 inch 15 PSI Paper 10 Micron Nominal 5.68 inch 15 PSI Paper 10 Micron Nominal 5.68 inch 25 PSI Paper 10 Micron Nominal 5.68 inch 25 PSI Paper 10 Micron Nominal 5.68 inch 25 PSI Paper 3 Micron Nominal 5.68 inch 25 PSI Micro Glass 10 Micron Nominal 5.68 inch 25 PSI Paper
C1LA74
SAF07154/SF6520-K 25 GPM 3/4 NPT
None
1.87
C1LA39
SAF07254/SF6520-K 25 GPM 3/4 NPT
None
1.87
C1LA40
SAF10254/SF6520-K 25 GPM
1 NPT
None
1.87
C1LA41
SAF11254/SF6520-K 25 GPM -12 SAE
None
1.87
C1LA73
SAF13254/SF6549-K 25 GPM -16 SAE
None
1.87
C1LA42
SAF13254/SF6520-K 25 GPM -16 SAE
None
1.87
Note: Part numbers the end in a "-K" are assembled by us. Part numbers that do not end in a "-K" are assembled by Stauff.
Parts for Stauff SAF07/11 Series Filters

Catalog Part No. C1KZ91 C1KZ92 C1KZ93 C1KZ98 C1KZ72 C1KZ71 Part Number STNA42335 STNA42356 STNA42362 STNA44361 SF-6549 SF-6521 Description Filter Head, SAF-07-25-4, 3/4 NPT ports, 25 PSI bypass, 4 plugged gauge ports Filter Head, SAF-10-25-4, 1 NPT ports, 25 psi bypass, 4 plugged gauge ports Filter Head, SAF-11-25-4, -12 SAE ports, 25 psi bypass, 4 plugged gauge ports Filter Head, SAF-13-25-4, -16 SAE ports, 25 psi bypass, 4 plugged gauge ports Element, 3 micron nominal Micro Glass, 5.76 inch Element, 10 micron nominal Paper, 5.68 inch Element, 10 micron nominal Paper, 8.00 inch 1.10 Wt. Price Each
C1GA44 SF-6520
343

Hydraulic Filters
Parts for Stauff SAF07/11 Series Filters
Catalog Part No. C1KZ69 C1KZ70 C1FZ75 C1FZ32 Part Number SF-6505 SF-6511 GV-5 CI-12 Description Element, 12 micron nominal Micro Glass, 5.76 inch Element, 25 micron nominal Paper, 5.68 inch Element, 25 micron nominal Paper, 8.00 inch Vacuum Gauge for suction line applications, for filters with 3 PSI by-pass Vacuum Gauge for suction line applications, for filters with 5 PSI by-pass Pressure Gauge for return line applications, for filters with 15 PSI by-pass Pressure Gauge for return line applications, for filters with 25 PSI by-pass 0.19 0.18 0.15 0.15 1.12 Wt. Price Each
C1GA43 SF-6510
C1GG85 GV-10 C1GF95 CI-20 C1KZ64 C1KZ63
SAF-07-15-SPRIN Bypass Spring, 15 psi G
SAF-07-03-SPRIN Bypass Spring, 3 psi G Note: Element seal is included with element Note: Complete assembly consists of one Filter Head, one Element, optional gauge, and optional bypass spring.
Spin-On Suction / Return Filters Stauff SSF-120/160 Series To 12 GPM Suction To 60 GPM Return
Features: Spin-on element for quick replacement. Optional visual and electrical condition indicators. Light weight die-cast aluminum head. Elements available in both nominal rated paper and absolute rated synthetic media. Application: Designed for low pressure return line applications on mobile and industrial equipment. May be used as a suction filter if the 3 or 5 PSI by-pass spring is installed. Housing: High strength die-cast cast aluminum head. Buna-N seals compatible with all petroleum base fluids. Element: Throw-away metal spin-on canister. Assembly: Complete assembly consists of one Filter Head, one Element, optional Gauge, and optional bypass spring (25 psi bypass spring is standard). Nominal Flow Rating: 60 GPM. See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 568 Maximum Operating Pressure: 200 PSI. Operating Temperature Range: -25F to 212F. Dimensions & Pressure Drop Curves: page 567 Spin-On Suction / Return Filters Stauff SSF-120/160 Series To 12 GPM Suction To 60 GPM Return
Catalog Part No. C1LA43 Stauff Model SSF120254/SF6720-K Nom Flow Rating 60 GPM 60 GPM 60 GPM 60 GPM 60 GPM
Port Size 1-1/4 NPT 1-1/4 NPT 1-1/4 NPT 1-1/4 NPT 1-1/4 NPT
Element
Element By-Pass Length Spring Indicator None None None None None None
Other Features All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged
Wt.
Price Each
10 Micron Nominal Paper 6.63 inch 25 PSI 10 Micron Nominal Paper 6.63 inch 15 PSI 10 Micron 6.63 inch 15 PSI Nominal Paper 25 Micron 6.63 inch 15 PSI Nominal Paper 25 Micron 6.63 inch 15 PSI Nominal Paper
C1GA59 SSF120154/SF6720 C1LA75 SSF120154/SF6720-K
3.65 3.65 3.58 3.58
C1GA58 SSF120154/SF6710 C1LA76 C1LA44 SSF120154/SF6710-K SSF160254/SF6703-K
3 Micron 60 GPM SAE-20 Nominal Micro 6.63 inch 25 PSI Glass
344

Hydraulic Filters
Catalog Part No. Stauff Model Nom Flow Rating Port Size Element Element By-Pass Length Spring Indicator None None None Other Features All 4 indicator ports machined & plugged All 4 indicator ports machined & plugged No indicator port Wt. 3.64 3.64 4.42 Price Each
C1GA60 SSF160154/SF6720 C1LA77 C1KG40 C1LA45 SSF160154/SF6720-K SSF160250/SF6720 SSF160254/SF6720-K
10 Micron 60 GPM SAE-20 Nominal Paper 6.63 inch 15 PSI 10 Micron 60 GPM SAE-20 Nominal Paper 6.63 inch 15 PSI 10 Micron 60 GPM SAE-20 Nominal Paper 6.63 inch 25 psi
10 Micron All 4 indicator ports 60 GPM SAE-20 Nominal Paper 6.63 inch 25 PSI None machined & plugged Note: Part numbers the end in a "-K" are assembled by us. Part numbers that do not end in a "-K" are assembled by Stauff.
Parts for Stauff SSF120/160 Series Filters

Catalog Part No. C1KZ87 C1KZ88 C1KZ96 C1KZ97 C1KZ74 C1KZ73 Part Number SSF-120-25-4 SSF-150-25-4 STNA43447 STNA44232 SF-6704-MG SF-6703-MG SF-6707-MG/2 SF6706MG SF-6721 SF-6730-MG SF-6731-MG SF-6711 SF-6710 GV-5 CI-12 SSF15SPRING SSF03SPRING Description Filter Head, Suction, SSF-120-05-2, 1-1/4 NPT ports, 5 psi bypass, 2 plugged gauge ports Filter Head, SSF-120-25-4, 1-1/4 NPT, 25 psi bypass, 4 plugged gauge ports Filter Head, SSF-150-25-4, 1-1/2 NPT, 25 psi bypass, 4 plugged gauge ports Filter Head, SSF-160-25-4, SAE -20 ports, 25 psi bypass, 4 plugged gauge ports Filter Head, SSF-160-25-4, SAE -24 ports, 25 psi bypass, 4 plugged gauge ports Element, 3 micron nominal Micro Glass, 10.6 inch Element, 3 micron nominal Micro Glass, 6.6 inch Element, 6 micron nominal Micro Glass, 10.6 inch Element, 6 micron nominal Micro Glass, 6.6 inch Element, 10 micron nominal Paper, 10.6 inch Element, 10 micron nominal Paper, 6.63 inch Element, 12 micron nominal Micro Glass, 6.6 inch Element, 12 micron nominal Micro Glass, 10.6 inch Element, 25 micron nominalPaper, 10.6 inch Element, 25 micron nominal paper spin-on, 6.63 inch Element, 125 micron stainless steel wire mesh, 6.63 inch Vacuum Gauge for suction line applications, for filters with 3 PSI by-pass Vacuum Gauge for suction line applications, for filters with 5 PSI by-pass Pressure Gauge for return line applications, for filters with 15 PSI by-pass Pressure Gauge for return line applications, for filters with 25 PSI by-pass Bypass Spring, 15 psi Bypass Spring, 3 psi 2.18 2.30 0.19 0.18 0.15 0.15 2.16 Wt. 1.50 Price Each
C1GA57 SSF-120-05-2
Fluid Conveying
C1KZ76 C1KZ75 C1KZ79 C1KZ81 C1KZ82 C1KZ77 C1GA45
C1GA46 SF-6720
C1GA47 SF6790 C1FZ75 C1FZ32 C1LA69 C1KZ86 C1GG85 GV-10 C1GF95 CI-20
Note: Complete assembly consists of one Filter Head, one Element, optional gauge, and optional bypass spring.
345

Hydraulic Filters
Features: Spin-on element for quick replacement. Optional visual and electrical condition indicators. Cast aluminum head. Elements available in both nominal rated paper and absolute rated synthetic media. Application: Designed for low pressure return line applications on mobile and industrial equipment. May be used as a suction filter if the 3 or 5 PSI by-pass spring is installed. Housing: SSF24 Models: Housing in middle, elements on opposite sides of housing. SSF25 Models: Elements are side by side. High strength cast aluminum head. Buna-N seals compatible with all petroleum base fluids. Element: Throw-away metal spin-on canister. Assembly: Complete assembly consists of one Filter Head, two Elements, optional Gauge, and optional bypass spring (25 psi bypass spring is standard). Nominal Flow Rating: Max 120 GPM. See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 568 Maximum Operating Pressure: 150 PSI. Operating Temperature Range: -22F to 212F. Dimensions & Pressure Drop Curves: page 566 Spin-On Suction / Return Filters Stauff SSF-24/25 Series To 35 GPM Suction To 120 GPM Return
Catalog Part No. C1LA47 Stauff Model Max Flow Rating Port Size Element Element By-Pass Length Spring Indicator None Other Features All indicator ports machined & plugged Wt. Price Each
SSF25251/SF6703MG-K 120 GPM
1-1/2 3 Micron NPT Nominal 6.63 inch 25 PSI 2 in. Flange Micro Glass 1-1/2 6 Micron NPT Nominal 6.63 inch 25 PSI 2 in. Micro Glass Flange 1-1/2 6 Micron NPT Nominal 10.6 inch 25 PSI 2 in. Flange Micro Glass 1-1/2 NPT 2 in. Flange 1-1/2 NPT 2 in. Flange 1-1/2 NPT 2 in. Flange 1-1/2 NPT 2 in. Flange 10 Micron Nominal 6.63 inch 25 PSI Paper 10 Micron Nominal 6.63 inch 25 PSI Paper 10 Micron Nominal 10.6 inch 25 PSI Paper 25 Micron Nominal 6.63 inch 25 PSI Paper
C1LA48
None
All indicator ports machined & plugged
C1LA81
None
C1GA61 SSF25251/SF6720
120 GPM
None
10.53
C1LA79
SSF25251/6720-K
120 GPM
None
10.53
C1LA80
SSF25251/SF6721-K
120 GPM
None
C1LA49
SSF25251/SF6710-K
87.5 GPM
None
346

Hydraulic Filters
Parts for Stauff SSF24/25 Series Filters
Catalog Part No. C1KZ89 C1KZ73 C1KZ74 C1KZ75 C1KZ76 C1KZ79 C1KZ81 C1KZ82 C1GA45 C1KZ77 C1FZ75 C1FZ32 Part Number SSF-25-25-1-0 SF-6703-MG SF-6704-MG SF6706MG SF-6707-MG/2 SF-6721 SF-6730-MG SF-6731-MG SF-6710 SF-6711 GV-5 CI-12 Description Filter Head, SSF-25-25-1-0, 1-1/2 NPT and 2 inch Code 61 Element, 3 micron nominal Micro Glass, 6.6 inch Element, 3 micron nominal Micro Glass, 10.6 inch Element, 6 micron nominal Micro Glass, 6.6 inch Element, 6 micron nominal Micro Glass, 10.6 inch Element, 10 micron nominal Paper, 6.63 inch Element, 10 micron nominal Paper, 10.6 inch Element, 12 micron nominal Micro Glass, 6.6 inch Element, 12 micron nominal Micro Glass, 10.6 inch Element, 25 micron nominal Paper, 6.63 inch Element, 25 micron nominal Paper, 10.6 inch Element, 125 micron stainless steel wire mesh, 6.63 inch Vacuum Gauge for suction line applications, for filters with 3 PSI by-pass Vacuum Gauge for suction line applications, for filters with 5 PSI by-pass Pressure Gauge for return line applications, for filters with 15 PSI by-pass Pressure Gauge for return line applications, for filters with 25 PSI by-pass 2.30 0.19 0.18 0.15 0.15 2.18 2.16 Wt. Price Each
C1GA46 SF-6720
C1GA47 SF6790 C1GG85 GV-10 C1GF95 CI-20
Note: Element seal is included with element Note: Complete assembly consists of one Filter Head, two Elements, optional gauge, and optional bypass spring.
Fluid Conveying
347

Hydraulic Filters
Spin-On Return Filters Vickers OFRS-25 Series To 25 GPM

Features: Spin-on element for quick replacement. Filter head accommodates a variety of element media types and grades. Application: For use in return lines of mobile and industrial hydraulic systems. Any mounting position is permitted, but vertical is preferred for easier servicing. Material: Die-cast aluminum head. Carbon steel spin-on canister. Elements: (R-pak Spin-On Elements): High performance absolute rated 5-layer media featuring proprietary Vickers glass micro fiber media with special resin binder placed between non woven synthetic diffuser layers, with upstream and downstream epoxy-coated carbon steel mesh support. Fluids & Seals: Suitable for use with petroleum based, oil-water emulsions, high water based and most water-glycol fluids. Buna-N seals are standard. Indicators: Optional ports in the filter head allow installation of a pressure gauge to indicate the element's condition. The optional gauge is shipped uninstalled from the filter. Nominal Flow Rating: 15 GPM (5.8 inch element). 25 GPM (8 inch element). See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 576 Maximum Operating Pressure: 100 PSI. Element Collapse Rating: 150 PSID for R-Pak. Operating Temperature Range: -40 F to 225F. Dimensions & Pressure Drop Curves: page 576 Spin-On Return Filters Vickers OFRS-25 Series To 25 GPM
Catalog Part No. C1JL58 Vickers Part No. 02-361809 Vickers Model Nom Flow Rating Port Size 1 NPT Element 3 Micron Absolute R-pak 5 Micron Absolute R-pak 10 Micron Nominal Element By-Pass Length Spring Gauge 5.8 inch 25 PSID Yes Gauge Tap Other Loc Features Inlet A Wt. 2.60 Price Each
OFRS-25-P-1R0315 GPM PA-X25-10 OFRS-25-P-1R0515 GPM PA-10 OFRS-25-P-PA-10 15 GPM
C1ZZ74 02-361787 C1KD70 736265
1 NPT 1 NPT
5.8 inch 5.8 inch
25 PSID 25 PSID
Yes Yes
Inlet A Inlet A
2.52 2.06
Parts for Vickers OFRS-25 Series Filters

Catalog Part No. C1HH26 C1ER53 Part Number V0191B1R03 V0191B1R05 Description 5.8 Inch 3 micron absolute R-pak element (includes element and Buna-N seal) 5.8 Inch 5 micron absolute R-pak element (includes element and Buna-N seal) Wt. 1.34 1.28 Price Each
348

Hydraulic Filters
Spin-On Return Filters Vickers OFRS-60 Series To 60 GPM

Features: Spin-on element for quick replacement. Application: For use in return lines of mobile and industrial hydraulic systems. Any mounting position is permitted, but vertical is preferred for easier servicing. Material: Die-cast aluminum head. Carbon steel spin-on canister. Elements: (R-pak Spin-On Elements): High performance absolute rated 5-layer media featuring proprietary Vickers glass micro fiber media with special resin binder placed between non woven synthetic diffuser layers, with upstream and downstream epoxy coated carbon steel mesh upstream & downstream support. (W-pak Spin-On Water Removal Elements): Designed to remove free & emulsified water from petroleum-based hydraulic fluids and lubricants on a temporary (5 days maximum) basis. Fluids & Seals: Suitable for use with petroleum based, oil-water emulsions, high water based and most water-glycol fluids. Buna-N seals are standard. Indicators: Optional ports in the filter head allow installation of a pressure gauge to indicate the element's condition. The optional gauge is uninstalled from the filter. Nominal Flow Rating: 30 GPM (7 inch element). 60 GPM (11 inch element). See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 577 Maximum Operating Pressure: 100 PSI. Element Collapse Rating: 150 PSID (R-Pak). Operating Temperature Range: -40 F to 225F. Dimensions & Pressure Drop Curves: page 577 Spin-On Return Filters Vickers OFRS-60 Series To 60 GPM
Catalog Part No. Vickers Part No. Vickers Model Nom Flow Rating Port Size 1-1/2 NPT 1-1/2 NPT 1-1/2 NPT Element 10 Micron Nominal 10 Micron Nominal None (Select Below) Element By-Pass Length Spring Gauge 7 inch 7 inch -25 PSID 25 PSID 25 PSID Yes No Yes Gauge Tap Other Loc Features Inlet A None Inlet A Wt. 4.45 4.43 2.71 Price Each
Fluid Conveying
C1BZ45 736277
OFRS-60-P-PA-10 30 GPM OFRS-60-P10 OFRS-60-P-PA-10S50 30 GPM
C1JR79 575947 C1FM80 02-309085
Parts for Vickers OFRS-60 Series Filters

Catalog Part No. Part Number Description 7 Inch 5 micron absolute R-pak element. 7 Inch 10 micron absolute R-pak element. 7 Inch 10 micron nominal single layer element 11 Inch 3 micron absolute R-pak element. Vickers model V0211B2R03. 11 Inch 5 micron absolute R-pak element 11 Inch 10 micron absolute R-pak element 11 Inch 20 micron absolute R-pak element. Vickers model V0211B2R20. 11 Inch W-Pak H2O-Pro Water Removal Element (Vickers Model W0211B2W10) with 32 ounce water holding capacity 0-60 PSI Gauge for use in models with 25 PSI by-pass valve. 1/8 NPT center back mount. Wt. 2.30 2.36 2.39 3.19 3.20 3.20 3.20 3.12 0.26 Price Each
C1KV13 5002409 C1KV14 5002510
C1CC64
941107
C1HQ46 5002512 C1KV15 5002513 C1KV16 5002514 C1KV17 5002515
C1CC44 927081 C1FN12 3039704
Note: Element seal is included with element
349

Hydraulic Filters
Spin-On Return Filters Vickers HS22 Series To 120 GPM

Features: Designed to comply with ANSI specifications and ISO cleanliness standard. Dual flow path design maximizes flow capability and service life. Spin-on element for quick replacement. High efficiency replacement elements in standard configurations to meet Target Cleanliness Levels. Water removal element available (W-Pak). Filter head accommodates a variety of element media types and grades. Application: For use in return lines of mobile and industrial hydraulic systems. Any mounting position is permitted, but vertical is preferred for easier servicing. Material: Aluminum head. Carbon steel spin-on canisters. Elements: (R-pak Spin-On Elements): High performance absolute rated 5-layer media featuring proprietary Vickers glass micro fiber media with special resin binder placed between non woven synthetic diffuser layers, with upstream and downstream epoxy coated carbon steel mesh upstream & downstream support. (W-pak Spin-On Water Removal Elements): Designed to remove free & emulsified water from petroleum-based hydraulic fluids and lubricants on a temporary (5 days maximum) basis. Fluids & Seals: Compatible with most petroleum oil, water glycol, oil-in-water and water-in-oil fluids. Buna-N seals are standard. Indicators: Ports in the filter head allow installation of a pressure gauge to indicate the element's condition. The optional gauge is shipped uninstalled from filter. Nominal Flow Rating: 7 Inch element filters have a 60 GPM nominal manufacturer's rating, but Pressure Drop Curves stop at 40 GPM. 11 Inch element filters have a 120 GPM nominal manufacturer's rating, but Pressure Drop Curves stop at 80 GPM. See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 574 Maximum Operating Pressure: 200 PSI. Element Collapse Rating: 150 PSID (R-Pak and W-Pak). Operating Temperature Range: -25 F to 225F. Dimensions & Pressure Drop Curves: page 574 Spin-On Return Filters Vickers HS22 Series To 120 GPM
Nom Flow Rating
Catalog Part No. C1KK15 C1FN16
Vickers Part No.
Vickers Model
Port Size SAE-24 St.Thd O-Ring
Element 10 Micron Absolute R-pak 5 Micron Absolute R-pak
Element By-Pass Length Spring Gauge 7 inch 11 inch 25 PSID 25 PSID No No
Wt. 16.00 19.00
Price Each
355AS11105A HS221SD31NB1R10 60 GPM
355AS11101A HS221SD31NB2R05 120 GPM SAE-24 St.Thd O-Ring
Application Note: Element pressure drop curves stop at 40 GPM for 7 inch and 80 GPM for 11 inch.
Parts for Vickers HS22 Series Filters

Catalog Part No. Part Number Description 7 Inch 5 micron absolute R-pak element 7 Inch 10 micron absolute R-pak element. Vickers model V0211B1R10. 7 Inch 10 micron nominal single layer element 11 Inch 3 micron absolute R-pak element. Vickers model V0211B2R03. 11 Inch 5 micron absolute R-pak element 11 Inch 10 micron absolute R-pak element 11 Inch 20 micron absolute R-pak element 11 Inch W-Pak H2O-Pro Water Removal Element (Vickers Model W0211B2W10) with 32 ounce water holding capacity 0-60 PSI Gauge for use in models with 25 PSI by-pass valve. 1/8 NPT center back mount. Wt. 2.30 2.36 2.39 3.19 3.20 3.20 3.20 3.12 0.26 Price Each
C1KV13 5002409 C1KV14 5002510 C1CC64 941107 C1HQ46 5002512 C1KV15 5002513 C1KV16 5002514 C1KV17 5002515
C1CC44 927081 C1FN12 3039704
Note: Element seal is included with element
350

Hydraulic Filters
In-Line Return Filters Stauff RIF48 Series To 150 GPM

Features: Conforms to HF4 specifications. By-pass valve & visual indicator is standard. Housing accommodates a variety of element media types and grades. Application: For use in return lines of mobile and industrial hydraulic systems. Any mounting position is permitted, but vertical is preferred for easier servicing. Material: Die Cast Aluminum Head. Steel Element case. Elements: Inorganic glass elements available in 03, 10, 25 micron ratings. Paper elements available in 03, 10, 25 micron ratings. Assembly: Complete assembly consists of one Filter Head, one or two Elements (depending on head selected), and optional Gauge. Fluids & Seals: Suitable for use with mineral oils, other fluids on request. Seals available: Buna-N, Viton. Indicators: Visual indicator (pressure gauge) or electrical pressure switch. Nominal Flow Rating: 100 GPM Maximum Operating Pressure: 300 PSI Operating Temperature Range: -20F to +225F Dimensions & Pressure Drop Curves: page 569 In-Line Return Filters Stauff RIF48 Series To 150 GPM
Catalog Part No. C1LA20 C1LA21 C1LA67 C1LA22 C1LA23 Stauff Model RIF48SG05BS1V-K RIF48SD10BS1V-K RIF48SD10BS2V-K RIF48SG10BS1V-K RIF48SG10BS2V-K Max Flow Rating 100 GPM 100 GPM 150 GPM 100 GPM 150 GPM Port Size SAE -24 SAE -24 SAE -24 SAE -24 SAE -24 Element 5 Micron Nominal Micro Glass 10 Micron Nominal Paper 10 Micron Nominal Paper 10 Micron Nominal Micro Glass 10 Micron Nominal Micro Glass Element By-Pass Length Spring Indicator Wt. S1 S1 S2 S1 S2 40 PSI 40 PSI 40 PSI 40 PSI 40 PSI Visual Visual Visual Visual Visual Price Each
Fluid Conveying
Parts for Stauff RIF48 Series Filters

Catalog Part No. C1KZ56 C1KZ57 C1KZ60 C1KZ58 C1KZ61 C1KZ95 C1KZ42 Part Number Description Head, SAE -24 ports, Double element length, 40 psi bypass spring, includes element connector Element, 5 micron nominal Micro Glass Element, 10 micron nominal Paper Element, 10 micron nominal Micro Glass Element Connector for two element Bowl Visual Indicator Wt. Price Each
RIF48SXXXB/S1/N Head, SAE -24 ports, Single element length, 40 psi bypass spring RIF48SXXXBS2N RTE48G05B RTE48D10B RTE48G10B STNA43199 HI48-V/1
Note: Complete assembly consists of one Filter Head, one or two Elements (depending on head selected), and optional gauge.
351

Hydraulic Filters
In-Tank Return Filters Stauff RTF40 Series To 100 GPM

Features: Conforms to HF-4 specifications. In-tank configuration minimizes space requirements and potential system leakage points. Dual inlet ports. Application: For use in return lines of mobile and industrial hydraulic systems where space saving in-tank style design is desired. Material: Die cast aluminum head and cover. Glass fiber reinforced polyamide bowl (bowl length 1), steel bowl (bowl length 2). Elements: Inorganic glass fiber elements available in 03-05-10-25 micron. Paper elements available in 03-05-10-20-25 micron. Note: By-pass valve in RTF47 models is integrated in the element. RTF48 and RTF49 by-pass is in filter head. Assembly: Complete assembly consists of one Filter Head, one Bowl, one or two Elements (depending on bowl selected), and optional Gauge. Element Connector is required when using double length bowl. Fluids & Seals: Suitable for use with mineral oils, other fluids on request. Seals available: Buna-N. Indicators: Visual indicator (pressure gauge) or electrical pressure switch. Nominal Flow Rating: RTF47 Models (75 GPM), RTF48 & RTF49 Models (100 GPM). See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 570 Maximum Operating Pressure: 100 PSI. Operating Temperature Range: -13 F to 212F. Dimensions & Pressure Drop Curves: page 569 In-Tank Return Filters Stauff RTF40 Series To 100 GPM
Catalog Part No. C1JB41 C1HS71 C1LA83 C1LA38 Stauff Model RTF48S25D10BS1N RTF48D10BTT25S1V Nominal Flow Rating Port Size Element SAE-20 10 Micron 100 GPM St.Thread Paper O-Ring 100 GPM SAE -24 10 Micron Paper 10 Micron Paper 10 Micron Micro Glass 10 Micron Micro Glass Bowl Length Code S1 S1 S1 S1 Clogging Indicator None (Select Below) Yes (Gauge) Yes (Gauge) None (Select Below) None (Select Below) Outlet 1-1/2 NPT 1-1/2 NPT 1-1/2 NPT 1-1/2 NPT 1-1/2 NPT Other Features 25 PSI By-Pass (in filter head), Buna-N seals, 1/8 NPT indicator port 25 PSI By-Pass (in filter head), Buna-N seals 25 PSI By-Pass (in filter head), Buna-N seals 25 PSI By-Pass (in filter head), Buna-N seals 25 PSI By-Pass (in filter head), Buna-N seals Wt. 9.51 Price Each
7.37 7.37
RTF48D10BTT25S1V- 100 GPM SAE -24 K RTF48G10B/TT/25/-K 100 GPM SAE -24
C1LA68
RTF48G10BTT25S2N- 100GPM SAE -24 K
S2
Parts for Stauff RTF40 Series Filters

Catalog Part No. C1KZ62 C1KZ12 C1KZ94 C1KZ59 C1KZ60 C1KZ58 C1KZ61 C1JS68 C1LA19 Part Number Description Wt. Price Each
RTF48-HTT/B25PS Head, SAE -24 ports with 25 psi bypass, dual inlet ports I 1030012439 STNA42734 RTE48G03B RTE48G05B RTE48D10B RTE48G10B RTE47G10B WR-40 Bowl, Single Length, Polyamide Bowl, Double Length, Steel Element, 3 micron nominal Micro Glass Element, 5 micron nominal Micro Glass Element, 10 micron nominal Paper Element, 10 micron nominal Micro Glass Element, RTF47 Models only, S1 Length 10 micron Micro Glass, 25 psi Bypass Weld Riser for tank mount
1.89
352

Hydraulic Filters
Parts for Stauff RTF40 Series Filters
Catalog Part No. C1KZ95 C1FZ32 Part Number STNA43199 CI-12 Description Element Connector for two element Bowl Pressure Gauge for return line applications, for filters with 15 PSI by-pass 0.15 Wt. Price Each
C1GF95 CI-20 Pressure Gauge for return line applications, for filters with 25 PSI by-pass 0.15 Note: Complete assembly consists of one Filter Head, one Bowl, one or two Elements (depending on bowl selected), and optional gauge. Element Connector is required when using double length bowl.
Fluid Conveying
353

Hydraulic Filters
In-Tank Return Filters Vickers HF4RT Series To 120 GPM

Features: Designed to comply with ANSI specifications and ISO cleanliness standards Conforms to HF4 specifications Gauge and electrical switch options available to monitor element loading In-tank configuration minimizes space requirements and potential system leakage points Optional secondary port allows filtration of a second return line without additional fittings, or allows for a filtered fill port. Application: For use in return lines of mobile and industrial hydraulic systems where space saving in-tank style design is desired. Material: Aluminum head and cover. Carbon steel bowl. Elements: (C-pak Elements): High performance absolute rated 5-layer media featuring proprietary Vickers glass micro fiber media with special resin binder placed between non woven synthetic diffuser layers, with epoxy coated carbon steel mesh upstream & downstream support. Fluids & Seals: Suitable for use with petroleum based and most water glycol, oil-in-water and water-in-oil fluids. Buna-N seals are standard. Synthetic fluids require optional Viton seals. Indicators: Filter head is drilled & tapped 1/8 NPT (and plugged) for optional pressure gauge or switch. Nominal Flow Rating: 50 GPM (9 inch element). 100 GPM (18 inch element). 120 GPM (27 inch element). See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 573 Maximum Operating Pressure: 100 PSI. Element Collapse Rating: 150 PSID. Operating Temperature Range: -25 F to 250F. Dimensions & Pressure Drop Curves: page 573 In-Tank Return Filters Vickers HF4RT Series To 120 GPM
Catalog Part No. C1HZ30 Vickers Part No. 253AS12886A Vickers Model Nominal Flow Element By-Pass Other Rating Port Size Element Length Spring Indicator Features 9 inch 25 PSID None (Select below) Wt. Price Each
SAE-24 5 Micron HF4RT1SD313SD 50 GPM St.Thread Absolute BC05 O-Ring C-pak SAE-24 5 Micron HF4RT1SD346NB 100 GPM St.Thread Absolute C05 O-Ring C-pak
SAE-24 St.Thread 12.80 Secondary Port 20.30
C1FM27 253AS12662A
18 inch
25 PSID 0-60 PSI Gauge
Parts for Vickers HF4RT Series Filters

Catalog Part No. C1FM22 C1FM21 C1FN12 Part Number 229AS10037A 229AS10036A 3039704 Description 18 Inch 3 micron absolute C-pak element (Vickers model V4051B6C03) 18 Inch 5 micron absolute C-pak element (Vickers model V4051B6C05) 0-60 PSI Gauge for use in models with 25 PSI by-pass valve. 1/8 NPT center back mount. Wt. 3.95 3.22 0.26 Price Each
354

Hydraulic Filters
In-Tank Return Filters Internormen TEF Series To 1920 GPM

Features: Lightweight with multiple inlet ports. Filters are easy to change, and have a removable bowl, which prevents contamination from entering the reservoir and reduces the possibility of oil spillage during changes. Application: Tank-mounted return line filters. Material: Filter head AL, filter cover / filter bowl glass fiber reinforced polyamide Elements: The filter element consists of a star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow is from outside to inside. Filters finer than 40 ?m should use throw-away elements made of paper or Interpor fleece (glass fiber). Filter elements as fine as 5 ?m(c) are available; finer filter elements on request. Fluids & Seals: Mineral oil, other media on request. Nitrile (NBR) or Viton (FPM), other materials on reques t Indicators: Visual or electrical available. Nominal Flow Rating: Up to 2,113 GPM. Precise flow rates see Interactive Product Specifier, respectively; ?p-curves; depending on filter fineness and viscosity. Maximum Operating Pressure: 145 PSI Operating Temperature Range: +14F to +176F Dimensions: page 583 In-Tank Return Filters Internormen TEF Series To 1920 GPM
Catalog Part No. C1KY76 C1LA70 C1KY77 C1LA71 C1KY78 C1KY79 Nominal Internormen Part No. Flow Rating TEF21010VG16SPUG TEF21010P16SPUG6 TEF32010VG16SPUG TEF32010P16SPUG7 TEF42610VG16SPFS TEF62510VG16SPFS 50 GPM 75 GPM 85 GPM 100 GPM 110 GPM 165 GPM Port Size SAE -20 SAE -20 SAE -24 SAE -24 Code 61 Code 61 Element 10 micron glass 10 micron paper 10 micron glass 10 micron paper 10 micron glass 10 micron glass By-Pass Spring 29 PSI 29 PSI 29 PSI 29 PSI 29 PSI 29 PSI Indicator none none none none none none Wt. Price Each
Fluid Conveying
Parts for Internormen TEF Series

Catalog Part No. C1KX80 C1LA51 C1KX68 C1LA53 C1LA52 C1KX70 C1KX85 C1KX75 C1KX76 Part Number 305636 300174 300176 300201 300199 300247 311828 301721 301723 Element, TEF210, 10 micron paper Element, TEF210, 10 micron micro glass Element, TEF320, 10 micron micro glass Element, TEF320, 10 micron paper Element, TEF426, 10 micron micro glass Element, TEF625, 15 micron micro glass Visual Indicator Electrical Indicator Description Element, TEF210, 3 micron micro glass Wt. Price Each
355

Hydraulic Filters
4000 PSI Pressure Filters Vickers HF2P Series To 24 GPM

Features: Designed to comply with ANSI specifications and ISO cleanliness standard. Visual, electrical and electrical indicators with lamp options. Conforms to HF2 specifications. Compact design for use with servo and proportional valves. Manifold mounting option. Fatigue rated to 3000 PSI for maximum reliability. High efficiency replacement elements in standard configurations to meet Target Cleanliness Levels. High collapse elements available for non-bypass applications. Application: For use in pressure lines of mobile and industrial hydraulic systems. Any mounting position is permitted, but vertical is preferred for easier servicing. Material: Ductile iron head. Carbon steel bowl. Elements: (C-Pak Elements): High performance absolute rated 5-layer media featuring proprietary Vickers glass micro fiber media with special resin binder placed between non woven synthetic diffuser layers, with upstream and downstream epoxy coated carbon steel mesh upstream & downstream support. (H-Pak Elements): Similar to C-Pak except 304 stainless steel mesh upstream & downstream support, and heavier core tubes and media support for non-bypass applications. Fluids & Seals: Compatible with most petroleum oil, water glycol, oil-in-water and water-in-oil fluids. Buna-N seals are standard. Viton seals are available for phosphate ester fluids. Indicators: Filter head is machined (and plugged) for optional differential pressure indicator. Indicator styles available: Visual and Electrical. Nominal Flow Rating: 12 GPM (4 inch element). 24 GPM (8 inch element). See Filter Sizing Basics on page 563 . See Pressure Drop Curves on page 578 Maximum Operating Pressure: 4000 PSI. Element Collapse Rating: 250 PSID (C-Pak). 3000 PSID (H-Pak). Operating Temperature Range: -15 F to 250F. Dimensions & Pressure Drop Curves: page 578 4000 PSI Pressure Filters Vickers HF2P Series To 24 GPM
Nominal Flow Rating Port Size SAE-12 St.Thd O-Ring
Catalog Part No. Vickers Part No. Vickers Model C1FM96 255AS10026A
Element None (Select below)
Element By-Pass Length Spring 8 inch 43 PSID
Indicator None (Select below)
Other Features
Wt. 12.25
Price Each
HF2P1SA4JNB2 24 GPM
Parts for Vickers HF2P Series Filters

Catalog Part No. Part Number Description 8 Inch 3 micron absolute C-pak element with Buna-N seal. Vickers model V3041B2C03. 8 Inch 5 micron absolute C-pak element with Buna-N seal. Vickers model V3041B2C05. 30 PSI Popup Visual Differential Pressure Indicator with Viton seals. Model PVH-2B-V. Wt. 0.45 0.37 0.27 Price Each
C1FM19 226AS10023A C1FM18 226AS10022A C1FN14 3039727
356

Hydraulic Filters
6000 PSI Pressure Filters Stauff SF045/090/160 Series To 160 GPM

Features: STAUFF SF series High Pressure Filters are designed for in-line hydraulic applications, with a maximum operating pressure of 6000 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs. Application: For use in pressure lines for mobile and industrial hydraulic systems. Material: Spheroidal Graphite Cast Iron Filter Head, Cold Drawn Steel Filter Bowl, PTFE Support Ring. Elements: Inorganic glass elements available in 03, 05, 10, 20 micron ratings. Assembly: Complete assembly consists of one Filter Head, one Fiter Bowl, one Element, and optional Indicator. Head and Element flow ratings must match. Fluids & Seals: Mineral Oils, other fluids on request. Seals are available in Buna-N, Viton, and EPDM. Indicators: Visual and Electrical Nominal Flow Rating: SH045 - 45 GPM, SH090 - 90 GPM, SH160 - 160 GPM Maximum Operating Pressure: 6000 PSI Operating Temperature Range: +14F to +212F Dimensions & Pressure Drop Curves: page 572 6000 PSI Pressure Filters Stauff SF045/090/160 Series To 160 GPM
Catalog Part No. C1LA24 C1LA25 C1LA26 C1LA27 C1LA28 C1LA29 C1LA30 C1LA31 C1LA32 Stauff Model SF045G05B/TU/B/V-K SF045G10B/TU/B/V-K SF045G10B/TGU/B/V-K SF090G05B/TU/B/V-K SF090G10B/TU/B/V-K SF090G10B/TGU/B/V-K SF160G05B/TU/B/V-K SF160G10B/TU/B/V-K SF160G10B/TGU/B/V-K Nominal Flow Rating 45 GPM 45 GPM 45 GPM 90 GPM 90 GPM 90 GPM 160 GPM 160 GPM 160 GPM Port Size SAE -20 SAE -20 SAE -24 SAE -24 SAE -24 SAE -24 Element 5 Micron Glass 10 Micron Glass 5 Micron Glass 10 Micron Glass 5 Micron Glass 10 Micron Glass By-Pass Spring 87 PSI 87 PSI 87 PSI 87 PSI 87 PSI 87 PSI 87 PSI 87 PSI 87 PSI Indicator Visual Visual Visual Visual Visual Visual Visual Visual Visual Wt. Price Each
Fluid Conveying
1-1/4 Code 62 10 Micron Glass
Parts for Stauff SF Series Filters

Catalog Part No. C1KZ84 C1KZ83 C1LA33 C1KZ85 C1KZ65 C1KY99 C1KZ11 C1KY97 C1JB44 C1KZ66 C1KZ67 C1KY96 C1KZ68 Part Number SH045/070-TU/B SH090/160-TU/B SH090160TGUB SB045/2 SB090 SB160 SE045G05B SE-045-G10B SE090G05B SE090G10B SE160G05B SE160G10B Description Filter Head, 45 GPM, 87 psi bypass spring, SAE -24 ports Filter Head, 90 or 160 GPM, 87 psi bypass spring, SAE -24 ports Filter Head, 90 or 160 GPM, 87 psi bypass spring, 1-1/2 Code 62 ports Filter Bowl, 45 GPM Filter Bowl, 90 GPM Filter Bowl, 160 GPM Element, 45 GPM, 5 micron nominal Micro Glass Element, 45 GPM, 10 micron nominal Micro Glass Element, 90 GPM, 5 micron nominal Micro Glass Element, 90 GPM, 10 micron nominal Micro Glass Element, 160 GPM, 5 micron nominal Micro Glass Element, 160 GPM, 10 micron nominal Micro Glass 0.76 Wt. Price Each
SH045/070-TGU/B Filter Head, 45 GPM, 87 psi bypass spring, 1-1/4 Code 62 ports
357

Hydraulic Filters
Parts for Stauff SF Series Filters
Catalog Part No. C1KZ44 Part Number HIEB5OB Electrical Indicator Description Wt. Price Each
C1KZ45 HIVB5OB Visual Indicator with Manual Reset Note: Complete assembly consists of one Filter Head, one Filter Bowl, one Element, and optional Indicator. Head and Element flow rates must match.
6000 PSI Pressure Filters Internormen HP Series To 356 GPM

Features: In-line or flange mounted high pressure filters Application: Various port and differential pressure indicator options available. Possible to accommodate very high flow rates with a single housing. Material: Carbon Steel housing. Elements: The filter element consists of star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow direction is from outside to the inside. Filter elements are available down to 4 ?m(c). Internormen Product Line filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life. Fluids & Seals: Filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids and lubrication oils. Indicators: Visual and Electrical are available. Nominal Flow Rating: Up to 356 GPM. Precise flow rates see Interactive Product Specifier, respectively; ?p-curves; depending on filter fineness and viscosity. Maximum Operating Pressure: 6000 PSI Operating Temperature Range: +14F to +176F Dimensions: page 584 6000 PSI Pressure Filters Internormen HP Series To 356 GPM
Catalog Part No. C1LA66 C1LA64 C1LA65 Nominal Internormen Part No. Flow Rating HP913VG30EPUG4S2 HP17110VG30EPUG5S 2 HP45110VG30EPUG7S 2 25 GPM 50 GPM 73 GPM Port Size SAE -12 SAE -16 SAE -24 Element 5 micron glass 10 micron glass 10 micron glass By-Pass Spring 102 PSI 102 PSI 102 PSI Indicator None None None Wt. Price Each
Parts for Internormen HP Series

Catalog Part No. C1GF77 C1LA54 C1LA50 C1LA55 C1LA61 Part Number 300147-INT 300255-INT 300104 304114 317129 Description Element, HP171, 10 micron micro glass Element, HP451, 10 micron micro glass Element, HP91, 10 micron micro glass Element, HP91, 5 micron micro glass Indicator, Visual, 73 PSI Wt. 0.15 Price Each
358

Filter Carts
Portable Filtering Transfer Unit Internormen Mobile Off-Line Filter Unit

The mobile filter unit is intended for oil maintenance on hydraulic systems. The area of application comprises: - secondary flow filtration in addition to the existing operating filter - secondary flow filtration without the action of the operating filter - filtration when filling the oil reservoir. Features: The filter unit must not be used to pump contaminated hydraulic fluids and is therefore designed without a switchover fitting to by-pass the filter. The compact structural design on a base plate without pipe satisfies the prerequisites for small dimensions and high reliability. The transporting trolley makes it possible to move close up to confined locations with difficult access, and to fix the accessories (such as hoses and the connection cable) in a safe and reliable manner. This cart comes without filter elements, (1) element is required and are purchased separately. Select (1) element from table below. Rated Flows: 7.5 GPM (Model UM20) Maximum Operating Pressure: 58 PSI. Operating Temperature Range: 23F to 140F. Fluids & Seals: hydraulic oil based on mineral oil from 10 mm/s, other media on request Electricals: Model UM20: 110VAC 60Hz Single Phase motor. Portable Filtering Transfer Unit Internormen Mobile Off-Line Filter Unit
Catalog Part No. C1LA72 Part No. UM20XX10BPP01W07L10L1 Rated Flow (GPM) 7.2 GPM Elements None, (1) are required, select form table below Indicator Pressure Gauge Wt. 92.00 Price Each
Fluid Conveying
Note: This cart comes without filter elements, (1) element is required and are purchased separately. Select (1) element from table below.
Elements for Internormen Mobile Filtering Transfer Unit (1) Required

Catalog Part No. C1LA60 C1LA59 C1LA58 C1LA56 C1LA57 C1LA63 C1LA62 Part Number 315444 314492 314491 314453 314454 322233 322225 Description Element, UM20, 4 micron absolute fiber glass Element, UM20, 7 micron absolute fiber glass Element, UM20, 10 micron absolute fiber glass Element, UM20, 15 micron absolute fiber glass Element, UM20, 20 micron absolute fiber glass Element, UM20, Water Absorption, 5 micron absolute fiber glass Element, UM20, Water Absorption, 10 micron absolute fiber glass Wt. Price Each
359

Fluid Analysis
Stauff Fluid Analysis Service Kits

Reduce The Risk of Failure: Fluid is the lifeblood of every hydraulic power system. In the same way a blood sample helps a doctor diagnose problems with a patient's health, a sample of hydraulic fluid can help pinpoint sources of contamination and determine whether or not adequate filtration is being used. As a key part of that analysis, Stauff Fluid Analysis Service can help you reduce catastrophic equipment failures, maintain optimum component performance, and identify any substandard maintenance practices. Your bottom line benefit is increased productivity. Stauff Fluid Analysis Service Features: Testing is specifically designed for hydraulic fluids Test results are presented in an easy to understand format Spectographic Analysis 19 elements for wear metals, contaminants and additives Viscosity the kinematic viscosity reported in centistokes (cSt) Visible Debris Analysis microscopic examination of any visible debris in the sample Total Acid Number (TAN) Particle Count to determine the cleanliness of the system Karl Fisher (KF) to determine the exact concentration of water present in the oil
Stauff Fluid Analysis Service Kits

Catalog Part No. Stauff Part No. Description Check Oil Analysis Kit, single glass test bottle Wt. 0.28 Price Each
C1KT94 STFC-01-GLASS
Fluid Analysis Kits contain: Super clean sample bottle, Numbered test sample data form (must be filled out completely to receive the most accurate test results, including trend information), Packaging for mailing sample, Prepaid fluid analysis service.
360
Power Units & Accessories

Category Page Hydraulic Power & Control Hydraulic Power Units Haldex Barnes GC8000 & GC8001 Series - 12VDC & 24VDC Compact Power Units . . . . . . . . . . . . . . . . . Haldex Barnes GC9000 Series - AC Compact Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes HE2000 Series - AC & DC Compact Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes 12VDC Motor & Pump Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single & 3-Phase AC Power Units to 60HP (Eaton Vickers Standard Power Units) . . . . . . . . . . . . . . . . . Power Unit Accessories Breathers, Filler-Breathers, Reservoir Vent Filters & Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maurey Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pump/Motor & Pump/Engine Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sight Glasses, Sight Plugs, Magnetic Drain Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model Codes, Option Information, Technical Information, Performance Curves, Dimensions Haldex Barnes GC8000 Series Model Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes GC8001 Series Model Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes GC8000/GC8001 Series Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes GC9000 Series Model Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes GC9000 Series Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes HE2000 Series Model Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haldex Barnes HE2000 Series Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maurey Hi-Q Flexible Coupling Dimensions & Service Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nema C-Face Electric Motor Flange & Shaft Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363 368 371 373 374 375 381 382 383 585 586 587 591 592 595 600 612 614
361

Hydraulic Power Units
Compact Power Units, 12VDC & 24VDC Barnes GC8000/GC8001 Series

Haldex Barnes GC8000 & GC8001 Series DC Hydraulic Power Units offer you virtually limitless choices - from a selection of pre-assembled units, to a wide range of complete units assembled to your specifications, to the individual component kits which enable you to create or modify a unit to meet your exact requirements. GC8000 Series: GC8000 Units can be configured in 4 different ways. 1: Basic Power Unit with no directional valving. Add a remote mounted directional valve to run either single acting or double acting cylinder. 2: Manual Control Power Unit. Has manual valve to start unit and operate a single acting cylinder. 3: Remote Control Power Unit. Has solenoid valving to remotely operate a single acting cylinder. 4: Power Unit with 1 or 2 station NFPA D03 Parallel Manifold. The Power Unit has an o-ring seal machined surface that can accept manifold kits for subplate mounted valves. These valves can perform a wide variety of functions. GC8001 Series: GC8001 Units can be configured in 3 different ways: 1: Remote Control Power Unit. 4-Way solenoid operated cartridge valves to operate double acting cylinder or reversing motor. 2: Direct Mount NFPA D03 Pad Power Unit. Has a single D03 mounting pad that eliminates the need for manifold adapters. Valves perform a wide variety of functions. 3: Manual 4-Way Valve Power Unit. Has 3-position 4-way Tandem center manual valve with integral motor relay switch. Handle movement in either direction from center will start unit and direct flow to either double acting cylinder or reversing motor. Design Features: Close-coupled DC motors with Oldham coupling for accurate alignment. Hardened and ground alloy-steel gears and shafts. Precision needle bearings. High strength, fine grain cast iron pump housings. Spring-loaded lip-type pump shaft seals. Corrosion resistant externally mounted valves. Cartridge-type check valves and externally adjustable relief valves. 100 mesh reinforced brass inlet strainers. 40 micron dry element type breathers. Powder coated drawn steel reservoirs with magnetic particle collector. Units mount horizontally (Optional breather elbow kit for vertical mount - see kits). ** WARNING **: 12VDC units with .250" gear, over a 5 minute period, can run for 1 minute at 500 psi, or 1/2 minute at 2000 psi, then must be turned off and allowed to cool. See the Technical Information section for allowable motor duty cycle times for all gear widths at various pressure levels. Repair & Customizing Kits: GC8000 Kits page 366 GC8001 Kits page 367 Model Codes: GC8000 Model Codes page 585 GC8001 Model Codes page 586 Technical Information: page 587
362

Basic Power Units (DC) Barnes GC8000 Series (Without Control Valves)
These Basic Power Units are for use in applications using a remote mounted directional control valve. They include a direct-acting adjustable relief valve (1500-2500 PSI), load check valve, and alternate outlet and return ports. All valves are of cartridge construction. All ports are SAE straight thread o-ring type (9/16-18 Outlet Port, Return Port and Auxiliary Outlet Port. 7/16-20 Auxiliary Return Port). This group of power units may be repaired or customized using GC8000 Kits.
GPM GPM Amps Amps Relief @ @ @ Motor Start 500 2000 @ 500 2000 Valve PSI Switch PSI PSI PSI Setting 1.35 115 205 2500
Fluid Conveying
Catalog Part No. C1EL95
Barnes Part No. 1300757
Motor
Reservoir Capacity 3 Quarts
Other Features .250" Gear
Wt. 25.95
Price Each
12VDC Single Case (Internal) Terminal Std 2.25 Grounded Duty
Manual Control Power Units (DC) Barnes GC8000 Series (Single Acting Cylinder Applications)
A rugged manually operated lift-hold-lower valve is offered for single acting cylinder applications where the operator can be in close proximity to the unit. An electric power-on switch is integral to the lever assembly. The lever may be rotated to the "up" or "side" position relative to the mounting surface used. An optional pressure compensated lowering flow regulator may be installed under the manual release valve (See GC8000 Kits). This group of power units may be repaired or customized using GC8000 Kits.
GPM GPM Amps Amps Relief @ @ @ Motor Start 500 2000 @ 500 2000 Valve Switch PSI PSI PSI PSI Setting 1.35 115 205 2500
Motor
Wt. 27.00
Price Each
12VDC Single Case (Internal) Terminal Std 2.25 Grounded Duty
363

Remote Control Power Units (DC) Barnes GC8000 Series (Single Acting Cylinder Applications)
The cartridge type solenoid release valve provides a remote control means for lift-hold-lower in single acting cylinder applications. The solenoid cartridge is suitable for most outdoor applications. Standard features include a direct-acting adjustable relief valve, load check valve and straight thread o-ring ports (9/16-18 Outlet/Return Port and Auxiliary Outlet Port. 7/16-20 Auxiliary Return Port). An optional pressure compensated lowering flow regulator may be installed under the manual release valve. An optional Remote Control Pendant (p/n to be determined) is available. Pendant features (add when known) and proper terminals on end of 10 foot cord to connect to power unit. This group of power units may be repaired or customized using GC8000 Kits.
Fluid Conveying
Motor
Wt. 26.27
Price Each
12VDC Single (Internal) 2.25 Terminal Std Case Grounded Duty
364

Remote Control Power Units (DC) Barnes GC8001 Series (Double Acting Cylinder Applications)
The cartridge type 4-way solenoid operated directional control valve is used for remote control of double acting cylinders or reversing motors. Standard features include a direct-acting adjustable relief valve, load check valve, pilot-operated check valve and straight thread o-ring work ports (9/16-18). An optional Remote Control Pendant is available. This group of power units may be repaired or customized using GC8001 Kits.
Catalog Part No.
Barnes Part No.
Motor
Other Features
Wt.
Price Each
Fluid Conveying
1510073- 12VDC Single Case (Internal) C1FQ64 BOM Terminal Std 2.25 Grounded Duty
.250" Gear 4-way 3-position 30.72 Tandem Center
365

Barnes GC8000 Series Kits (DC)

These kits may be used to repair or modify existing GC8000 Series power units, or to build custom GC8000 Series power units. The Model Code page is a useful tool for kit selection for custom units. Model Codes: GC8000 Model Codes page 585

Catalog Part No. C1AK23 C1AK17 C1EL76 C1AK15 C1AK16 C1AJ93 C1EL81 C1EL75 C1EG63 C1AJ95 C1EM17 C1AJ97 C1EL78 Barnes Model 1300209 1300174 1300176 1300171 1300172 1300027 1300618 1300135 1300028 1300039 1303176 1300125 1300284 Basic Power Unit Adapter Kit Return Port Plug Kit Pump Kit, .125" Gear, 0.065 cubic inch Displacement Pump Kit, .187" Gear, 0.097 cubic inch Displacement Pump Kit, .250" Gear, 0.129 cubic inch Displacement Pump Kit, .500" Gear, 0.258 cubic inch Displacement Motor Kit, Standard Duty, 12VDC, Single Terminal Motor Kit, Medium Duty, 12VDC, Double Terminal Motor Kit, Medium Duty, 24VDC, Double Terminal Reservoir Kit, 1.5 Quart Capacity, 4.8" Diameter Cylindrical Reservoir Kit, 2 Quart Capacity, 4.8" Diameter Cylindrical Reservoir Kit, 3 Quart Capacity, 4.8" Diameter Cylindrical Reservoir Kit, 1 Gallon Capacity, 6.6" Diameter Reservoir Kit, 2 Gallon Capacity, 6.6" Diameter Reservoir Kit, 2.5 Gallon Capacity, Rectangular Reservoir Kit, 4 Gallon Capacity, Rectangular Breather Cap, 3/8" NPT Motor Start Switch Kit, 12VDC, 3-Pole, Case (Internal) Negative Grounded Motor Start Switch Kit, 12VDC, 4-Pole, Non-Grounded (UL Required) Motor Start Switch Kit, 24VDC, 4-Pole, Non-Grounded (UL Required) Description Wt. 2.80 0.25 0.80 3.78 3.78 3.78 16.09 15.56 16.98 1.67 2.00 2.35 3.00 4.70 5.00 11.13 Price Each
C1AK22 1300191
Fluid Conveying
C1AK27 1300619
C1EM19 1303178
C1BG75 2500006 C1HY58 1300939 C1HW30 1300937 C1HY57 1300938
0.05 0.85 0.98 0.96
366



Catalog Part No. C1EL91 C1EL92 C1AK17 C1EL76 C1AK15 C1AK16 Barnes Model 1300743 1300744 1300174 1300176 1300171 1300172 1300985 1300027 1300618 1300135 1300028 1300039 1303176 1300125 1300284 Description Adapter Kit (For Cartridge Directional Control Valve) Adapter Kit (For D03 Direct Mount Valve) Pump Kit, .125" Gear, 0.065 cubic inch Displacement Pump Kit, .187" Gear, 0.097 cubic inch Displacement Pump Kit, .250" Gear, 0.129 cubic inch Displacement Pump Kit, .500" Gear, 0.258 cubic inch Displacement Relief Valve Kit, Adjustable, 1500-2500 PSI Motor Kit, Standard Duty, 12VDC, Single Terminal Motor Kit, Medium Duty, 12VDC, Double Terminal Motor Kit, Medium Duty, 24VDC, Double Terminal Reservoir Kit, 1.5 Quart Capacity, 4.8" Diameter Cylindrical Reservoir Kit, 2 Quart Capacity, 4.8" Diameter Cylindrical Reservoir Kit, 3 Quart Capacity, 4.8" Diameter Cylindrical Reservoir Kit, 1 Gallon Capacity, 6.6" Diameter Reservoir Kit, 2 Gallon Capacity, 6.6" Diameter Reservoir Kit, 2.5 Gallon Capacity, Rectangular Reservoir Kit, 4 Gallon Capacity, Rectangular Breather Cap, 3/8 NPT Motor Start Switch Kit, 12VDC, 3-Pole, Case (Internal) Negative Grounded Motor Start Switch Kit, 12VDC, 4-Pole, Non-Grounded (UL Required) Motor Start Switch Kit, 24VDC, 4-Pole, Non-Grounded (UL Required) Pilot-Operated Check Valve, C1 Valve Coil, 12 VDC Pendant, Double-Acting for 4-Way 3-Position Valve Wt. 4.40 4.70 0.80 3.78 3.78 3.78 0.22 16.09 15.56 14.64 1.67 2.00 2.35 3.00 4.70 5.00 11.13 0.05 0.85 0.98 0.96 1.36 0.65 1.05 Price Each
Fluid Conveying
C1FR53 C1AJ93 C1EL81 C1EL75 C1EG63 C1AJ95 C1EM17 C1AJ97 C1EL78
C1AK27 1300619
C1EM19 1303178
C1BG75 2500006 C1HY58 1300939 C1HW30 1300937 C1HY57 C1EL86 C1EL89 C1JD78 1300938 1300727 1300740 2380322
367

Compact Power Units, AC, to 2HP Barnes GC9000 Series

Haldex Barnes GC9000 Series AC Power Units have been designed to provide a practical, economical solution to your individual AC power requirements. Pre-assembled basic units are available, and a wide variety of custom units can be built from kits. GC9000 Series: GC9000 Units can be configured in 4 different ways. 1: Basic Power Unit with no directional valving. Add a remote mounted directional valve to run either single acting or double acting cylinder. 2: Manual Release Valve Power Unit. Has manual valve to lower a single acting cylinder. 3: Electric Release Valve Power Unit. Has solenoid valve to remotely lower a single acting cylinder. 4: Power Unit with 1 to 3 station NFPA D03 Parallel Manifold. The Power Unit has an o-ring seal machined surface that can accept manifold kits for subplate mounted valves. These valves can perform a wide variety of functions. Design Features: Close-coupled AC motors with Oldham coupling for accurate alignment. Hardened and ground alloy-steel gears and shafts. Precision needle bearings. High strength, fine grain cast iron pump housings. Spring-loaded lip-type pump shaft seals. Corrosion resistant externally mounted valves. Cartridge-type check valves and externally adjustable relief valves. 100 mesh reinforced brass inlet strainers. 40 micron dry element type breathers. Powder coated drawn steel reservoirs with magnetic particle collector. Units mount horizontally. Note: Both Continuous Duty and Intermittent Duty performance information is found in Technical Information. Repair & Customizing Kits: GC9000 Kits page 369 Model Codes: GC9000 Model Codes page 591 Technical Information: page 592
Basic Power Units (AC, Without Control Valves) Barnes GC9000 Series
These Basic Power Units include a direct-acting adjustable relief valve, load check valve and alternate outlet and return ports. Several kits are available to customize these units. For single acting cylinder applications, release valve kits for manual or remote load lowering can be added. Pressure compensated return flow control kits can be installed under the release valves. For double acting cylinder or reversing motor applications, manifold kits are available to add up to 3 NFPA D03 subplate mounted valves. All ports are 9/16-18 SAE straight thread o-ring type. This group of power units may be repaired or customized using GC9000 Kits.
Catalog Part No. Full Load Cont. Nom. Pump Displ. Amps PSI Flow Gear Size 2000 0.75 PSI GPM .094 cu.in .1875"Gear Res. Other Cap. Features 1-1/2 Gal. Price Each
Barnes Part No.
Motor
Voltage
Wt. 46.13
C1FQ87 GC90006BA0A0R0-B
1HP 1725RPM 1Phase 60Hz 115/208-230 TEFC
368

Barnes GC9000 Series Kits (AC)

Barnes GC9000 Series Kits (AC)

Catalog Part No. C1JL81 C1JF37 C1AK18 C1AK19 C1AK20 C1ZZ38 C1ZZ36 C1AK25 C1DU68 C1AK11 C1DU69 C1AK13 C1DU70 C1DU72 C1DU75 Barnes Model 1303725 1303720 1300177 1300178 1300179 1300181 1300183 1300329 1300127 1300129 1300131 1300133 1300187 1300268 1300843 Description Motor/Adapter Kit, 1HP 1800 RPM, Single Phase, 60 Hz, 115/208/230 Volts, TEFC Motor/Adapter Kit, 2HP 3450 RPM, Single Phase, 60 Hz, 115/230 Volts, TEFC Pump Kit, .125" Gear, 0.064 cu.in. (0.50 GPM @ 1800 RPM) Pump Kit, .1875" Gear, 0.094 cu.in. (0.75 GPM @ 1800 RPM) Pump Kit, .250" Gear, 0.129 cu.in. (1.00 GPM @ 1800 RPM) Pump Kit, .500" Gear, 0.258 cu.in. (Requires Reservoir Tube Kit) (2.00 GPM @ 1800 RPM) Pump Kit, .750" Gear, 0.388 cu.in. (Requires Reservoir Tube Kit) (3.00 GPM @ 1800 RPM) Base (Primary) Manifold for NFPA D03 Valve Reservoir Kit, 1 Gallon Capacity, Horizontal Mount Reservoir Kit, 1.5 Gallon Capacity, Horizontal Mount Reservoir Kit, 2 Gallon Capacity, Horizontal Mount Reservoir Kit, 3 Gallon Capacity, Horizontal Mount Reservoir Tube Kit (Required for larger Pump Options E-J) Adapter Kit (No Motor) Adapter & Coupling Kit (Use to mount any 56C Frame Motor) Wt. 36.00 45.90 4.35 4.35 4.32 5.33 5.35 2.31 2.15 3.25 3.80 5.40 0.27 6.85 2.00 Price Each
Fluid Conveying
NFPA D03 Subplate Mounted Solenoid Valves: Vickers DG4V-3/DG4V-3S page 261
369

Compact Power Units, AC & DC Barnes HE2000 Series

The HE2000 Power Packs are based on a versatile platform that allows you to combine motors with a variety of pumps (pressure balanced and fixed clearance) and reservoirs (plastic and steel; cylindrical and rectangular). A unit can individually control up to four (4) hydraulic cylinders. The core of the system consists of an adapter with alternative shapes and variable assembly directions. Motors: DC Operation: Series and Compound Wound motors (12 V and 24 V). Efficient with long service life, and low power consumption. AC Operation: Flanges for AC motors permit the use of standard high efficiency single or 3 phase motors (115V, 230V, and 460V). Adapters: All HE2000 units are equipped with the same adapter size. Pumps: Pressure-balanced W Series ( .010 to .348 in per rev.) and fixed clearance GC Series ( .065 to .388 in per rev.) gear pumps are extremely efficient, with low noise. Start Switches: 12 VDC and 24 VDC, 3-pole and 4-pole, standard duty and heavy duty; 1 & 3 PH, 115/230/460 VAC start switches with high IP protection class and silver-plated contacts meet tough demands for a long service life. Relief Valves: Cartridge-style relief valves meet tough demands for dependability and life expectancy. Flow Controls: A built-in pressure-compensated flow regulator can be added, providing pressure compensated lowering speed between 1 and 4 gpm regardless of load. Reservoirs: The standard unit is equipped with a translucent plastic reservoir with 0.13 to 1.05 gallon usable volume or a steel reservoir with 0.18 to 4 gallon usable volume. Valves: Screw-in cartridge valves with a standard cavity are available in 2-way/2-position, 3-way/2-position, 3-way/3-position or 4-way/2-position versions. Cetop 2, Cetop 3, and additional cartridge valve blocks are available for up to 4 individual functions. A high performance cartridge check valve is standard. Fluids: Most premium grade petroleum based fluids can be used. Optimum operating viscosity range is 80-288 SSU. Minimum recommended viscosity is 66 SSU. Maximum recommended viscosity is 3600 SSU. Permissible cold start viscosity is 9000 SSU. Temperatures: Minimum recommended temperature is -13F. Maximum recommended temperature is 175F. Fluid Cleanliness: ISO 4406 Cleanliness level 18/14 or better is recommended. Assembly Kits: page 371 Model Codes: page 595 Technical Information: page 600
370

Barnes HE2000 Series Kits (AC & DC)
Fluid Conveying
Model Codes: page 595 Technical Information: page 600 Barnes HE2000 Series Kits (AC & DC)
Catalog Part No. C1JD34 C1JC13 C1HC95 Barnes Part No. Key 1303649 1303650 1303549 Description Wt. 2.72 2.69 0.81 0.25 0.22 0.80 3.78 3.78 3.78 0.22 16.09 15.56 16.98 7.35 0.85 Price Each
(II) Adapter (Schematics BA, CA, BB, CB, BE, CE) (II) Adapter (Schematics BF, BH, CF, BJ, CJ, BR, CR, BS, DA, DB, DC, DM, AM) (II) AC Motor Adapter (II) Port Plug (II) Solenoid Release Valve (III) Pump Kit, GC Series, 0.065 in displacement (1.06 cc) (III) Pump Kit, GC Series, 0.097 in displacement (1.59 cc) (III) Pump Kit, GC Series, 0.129 in displacement (2.12 cc) (III) Pump Kit, GC Series, 0.259 in displacement (4.24 cc) (IV) Relief Valve, 1500-2500 PSI Range (VI) Motor, 12VDC, Single Terminal, Standard Duty (VI) Motor, 12VDC, Double Terminal, Medium Duty (VI) Motor, 24VDC, Double Terminal, Medium Duty (VII) Reservoir, Steel, 2.5 Gallon Rectangular (IX) Start Switch, 12VDC, 3-Pole
C1AK22 1300191 C1HY62 1303534 C1AK17 C1EL76 C1AK15 C1AK16 C1AJ93 C1EL81 1300174 1300176 1300171 1300172 1300027 1300618
C1HW31 1303661
C1AK27 1300619 C1HW29 1300908 C1HY58 1300939
371

Barnes HE2000 Series Kits (AC & DC)
Catalog Part No. C1HY57 Barnes Part No. Key 1300938 Description Wt. 0.98 0.96 6.06 0.90 0.87 1.05 Price Each
C1HW30 1300937 C1HW28 1300878 C1GG44 1303570 C1GG41 1303569 C1JD78 2380322
(IX) Start Switch, 12VDC, 4-Pole, UL Recognized (IX) Start Switch, 24VDC, 4-Pole, UL Recognized (XI) Tube Kit, Steel, Vertical, GC/W Pumps, 3QT Reservoir (XIV) Pendant, DC, Double-Acting (XIV) Pendant, DC, Single-Acting (XIV) Pendant, Double-Acting for 4-Way 3-Position Valve
372

Barnes 12VDC Motor & Pump Assemblies
Applications: Tailgate Lifts Lift Trucks Farm Implements Portable Towers Truck Power Gates Telescopic Ladders Personnel Lifts Small Dump Trucks Motor : 12 Volt Series Wound DC motor close coupled to the pump with Oldham coupling to eliminate mis-alignment. Start Switch: Weather resistant solenoid switch. Pump: Haldex Barnes GC Series gear pump. Cast iron construction. Contains check valve, relief valve and cavity (SAE plug) for optional solenoid release valve. Ports: Straight Thread O-Ring. 3/4-16 Inlet. 9/16-18 Outlet. Barnes 12VDC Motor & Pump Assemblies
Catalog Part No. Barnes Part No. GPM GPM Amps @ @ Amps @ Relief Motor Start 500 2000 @ 500 2000 Valve Switch PSI PSI PSI PSI Setting 1.00 100 160 2000 PSI Price Each
Fluid Conveying
Motor
Other Features
Wt. 26.26
C1AK26 1300382
12VDC Single (Internal) 2.10 Terminal Std Case Grounded Duty
373

Eaton Vickers AC Single & 3-Phase Standard Power Units
5 to 6 weeks factory delivery on most units. Eaton pays freight, using carrier of Eaton's choice, to destinations in the lower 48 states for standard units off the configurator, not for modified units. Subject to change. Standard Features: Continuous-duty rated electric motors Aeroquip hose & fittings Lift-off tops Close-coupled pump & motor Standard relief valve, pressure gauge, temperature gauge. Optional Features: Cutler-Hammer motor starters, disconnects and panels Flanges and unions Needle valves Angle and globe valves Heat exchanges (air & water) Pressure gauges Vacuum and pressure switches Accumulators High-efficiency filtration.
Eaton Vickers Standard Power Units (Non-Stock)

Eaton Vickers Standard Power Units (Non-Stock)
Catalog Part No. N/A Vickers Model Value-Pak Description 5 to 30 gal reservoir To 10 GPM 1.5 to 10 HP To 3,000 PSI Series 26 gear pump Spin-on return filter Manifold option for (1) D03 valve station Optional motor starter 3 to 30 gal reservoir To 10 gpm .75 to 10 HP To 3,000 PSI Multiple pump options Spin-on return filter Leak-free design Remote pressure control adjustment Manifold options for up to (8) D03 valve stations Optional motor starter 20 to 60 gal reservoir To 21 GPM 7.5 to 30 HP To 3,000 PSI Multiple pump options Spin-on return filter Leak-free design Remote pressure control adjustment Manifold options for up to (6) D03 or D05 valve stations Optional motor starter 5 to 60 gal reservoir To 21 GPM .75 to 30 HP To 3,000 PSI Multiple pump options Modular manifold block Leak-free design Remote pressure control adjustment Optional motor starter 10 to 150 gal reservoir To 57 GPM .75 to 50 HP To 3,625 PSI Multiple pump options Manifold options for (8) D03, (8) D05 or (4) D08 valve stations Optional motor starter 10 to 100 gal reservoir To 57 GPM .75 to 50 HP To 3,625 PSI Flooded pump inlet Multiple pump options Manifold options for (8) D03, (8) D05 or (4) D08 valve stations Optional motor starter 30 to 100 gal reservoir To 57 GPM .75 to 50 HP To 3,625 PSI Flooded pump inlet Multiple pump options Manifold options for (8) D03, (8) D05 or (4) D08 valve stations Suction strainer Optional motor starter 60 to 100 gal reservoir To 25 GPM 10 to 60 HP To 4,250 PSI The world's quietest hydraulic power system Vane or piston pump Noise levels as low as 65 dBa (8) D03 or D05 valve stations Optional motor starter To 125 GPM 10 to 60 HP To 4,250 PSI Noise levels as low as 65 dBa Economical substitute for traditional motor/pump. especially in higher horsepowers Multiple pump options Optional motor starter Wt. Price Each
Fluid Conveying
N/A
System-Pak II
N/A
System-Pak Plus
N/A
Profile-Pak
N/A
System-Center
N/A
System-L Series
N/A
System-Overhead
N/A
Silent Tank System
N/A
Integrated Motor Pump
Note: These power units are NOT kept in stock. 5-6 weeks factory delivery on most units. Eaton pays freight, using carrier of Eaton's choice, to destinations in the lower 48 states for standard units off the configurator, not for modified units. Subject to change.
374

Power Unit Accessories Breathers, Filler-Breathers
Breathers
These units provide a filtered breathing port for hydraulic reservoirs. Can be removed for filling.
Breathers
Catalog Part No. C1KM82 C1CL65 Mfg. Model NBFG-2013-SP BF-2043 Mfg. Name Flow Ezy Flow Ezy Stauff Pipe Thread Construction Rating 25 SCFM 25 SCFM 26 SCFM A (in) B (in) Wt. 0.30 0.18 0.58 Price Each
3/4 NPT Nylon base, 10 micron, splash proof 3/4 NPT Nylon base, 40 micron
2.13 3.38 3.00 2.56 2.64 3.15
Fluid Conveying
SMBT-80-S-40-0C1KH51 N SMBT-80-S-40-0N12-0
3/4 NPT Chrome-plated Steel, 40 micron
375

Filler-Breathers
These units provide a filler and breathing port for hydraulic reservoirs. The screen keeps larger debris from entering reservoir and the breather cap filters the air. Mounting hardware, gaskets and template are included.
Filler-Breathers
Catalog Part No. Mfg. Model Mfg. Name Stauff Filler Cap 16 SCFM, Chrome Plated Steel, 10 Micron 16 SCFM, Chrome Plated Steel, 10 Micron 16 SCFM, Chrome Plated Steel, 10 Micron 26 SCFM, Chrome Plated Steel, 40 Micron Flange Height (in) Screen 3.1 in metal basket Options Wt. 0.81 Price Each
SMBB80S010 C1KN33 0CS080 SMBB-80-S-010 C1KH48 SMBB-80-S-010-0-C-P100 C1KN34 SMBB80S010 0CS150 C1JG39 SMBB80N040 0CS080
Fluid Conveying
Stauff
3.9 in plastic basket
0.99
Stauff
5.9 in metal basket
1.07
Stauff
3.1 in metal basket
no logo
0.80
Parts and Accessories for Filler-Breathers

Catalog Part No. C1JE42 Part Number FBR-035 Description Saint Machinery Weld Riser, 3-1/2" OD x 1" High. Raises filler/breather above the reservoir surface. Wt. 0.42 Price Each
376

Vickers Mobile Gate Breathers & Filler Breathers

Eaton Mobile-gateBreather Assemblies provide low cost, high efficiency protection against airborne moisture and particulate contamination. Patented technology eliminates moisture condensation in hydraulic system reservoirs. Moisture is prevented from entering and is actually pumped out with each flow cycle. The media regenerates its water holding capacity with every oil return phase, ensuring long service life. Features/Benefits: Proprietary Media: Reduces dew point temperature to prevent condensation and is 99.7% efficient in blocking particles 10? and larger Water Regeneration: Regenerates its water holding capacity with each cycle Reversible Flow Through Media: Allows for moisture to exit the reservoir Easy Installation: Lightweight design; only needs to be hand tightened Rugged Housing: Protects the media from external splashing. Performs as a gate: During the inhalation cycle, the Mobile-gate proprietary media blocks the water vapor from entering the reservoir. During the exhalation cycle, the media allows the moisture in the reservoir air to exit. The moisture is carried off the media by the exiting air, restoring the medias water barrier capacity, and the moisture barrier mechanism is not affected by the amount of exposure to moisture. The reservoir air is maintained at a low relative humidity, and more importantly, at a lower dew point temperature than the ambient temperature. Works even when the system is shut down: The Mobile-gate Vent Breather retards the vapor equilibrium process and works to prevent condensation even after the system is shut and cooled down, such as overnight. The dewpoint is slow to climb, even after the system temperature has dropped to the ambient temperature. Once the system has reached ambient temperature, condensation does not occur. Reduces humidity inside reservoir : The Mobile-gate Vent Breather lowers and stabilizes the relative humidity of air inside the reservoir, leading to a lower dewpoint (T dewpoint < T ambient = NO CONDENSATION) at a rate and amount that will be dependent upon several conditions: the ambient conditions, the internal reservoir heat, amount and frequency of reservoir air flow through the vent, and the temperature of the reservoir surfaces. Vickers Mobile Gate Breathers & Filler Breathers
Catalog Part No. Vickers Part No. Vickers Model MBR110 MBR120 Description Vickers Mobile Gate Breather, 3/4 Inch NPT Vickers Mobile Gate Filler Breather, Tank Mount Wt. 0.69 0.87 Price Each
Fluid Conveying
C1HZ95 5002486-1 C1HX70 5002487
377

Power Unit Accessories Spin-On Reservoir Vent Filters & Adapters
Vickers DIRT-Gate Breather Elements
DIRT-Gate media is made of a strong graded matrix especially designed for removing airborne contamination. This media is pleated to maximize surface area (high dirt holding capacity) and provides high efficiency at low pressure drop. Features: Rugged corrosion resistant ABS plastic housing. Visual mechanical indicator that triggers at 1 PSID during exhalation. Easy installation. Lightweight design only requires hand tightening. Efficiency: 99% at 2 micron. Temperatures: Up to 250F. Note: Mobile systems may actuate the indicator due to vibrations, in which case the element should be changed after 500 hours of operation. Mounting Adaptors: page 380 Vickers DIRT-Gate Breather Elements
Catalog Part No. Vickers Model Description DIRT-Gate Reservoir Vent Filter Element (Requires a mounting adaptor) Thread Size 1-1/2-16 UN Wt. 0.79 Price Each
Fluid Conveying
C1CL73 BR210
378

Vickers H20-Gate Breather Elements
Performs as a Gate. During the inhalation cycle, the H2O-Gate proprietary media blocks the water vapor from entering the reservoir. During the exhalation cycle, the media allows the moisture in the reservoir air to exit. The moisture is blown off the media by the exiting air, restoring the media's water barrier capacity, and the moisture barrier mechanism is not affected by the amount of exposure to moisture. The reservoir air is maintained at a low relative humidity, and more importantly, at a lower dew point temperature than the ambient temperature. Features: Rugged corrosion resistant ABS plastic housing. Visual mechanical indicator that triggers at 1 PSID during exhalation. Reversible flow-through media allows moisture to exit while filter regenerates its capacity to prevent moisture ingression. Easy installation. Lightweight design only requires hand tightening. Efficiency: 99% at 2 micron. Application Note: In an operating system, the H2O-Gate vent breather creates a moisture barrier when there is at least a 5F difference between reservoir and ambient temperature, and when there is at least a 10% exchange of air volume above the fluid. Temperatures: Up to 250F. Note: Mobile systems may actuate the indicator due to vibrations, in which case the element should be changed after 500 hours of operation. Mounting Adaptors: page 380 Vickers H20-Gate Breather Elements
Catalog Part No. Vickers Model Description H2O-Gate Reservoir Vent Filter Element (Requires a mounting adaptor) Low Profile Version of the H2O-Gate Reservoir Vent Filter Element (half height, above pressure drop data & dimensions do not apply) Thread Size 1-1/2-16 UN SAE-12 Wt. 1.34 0.82 Price Each
Fluid Conveying
C1CL72 BR110 C1KF74 BR310
379

Reservoir Adaptors for Spin-On, DIRT-Gate & H20-Gate Elements
Pipe Thread Adaptors: One end screws into breather element and is sealed with an o-ring. Other end screws into pipe thread coupling. Bayonet Adaptors: One end screws into breather element and is sealed with an o-ring. Other end connects to the mounting flange of a standard filler-breather. Standard Filler-Breather Mounts: page 376 Reservoir Adaptors for Spin-On, DIRT-Gate & H20-Gate Elements
Catalog Part No. Vickers Model Description Pipe Thread Adaptor (Mounts to a 1-1/4 NPT coupling) Bayonet Style Adaptor (Mounts to the mounting flange of a standard filler-breather) Wt. 0.59 0.66 Price Each
Fluid Conveying
C1DG11 P-077002 C1CC41 924710
380

Power Unit Accessories Flexible Couplings
Maurey Hi-Q Flexible Couplings

Features: Couplings prevent metal-to-metal contact and compensate for minor angular and center line misalignments. Fast installation. Parts are precision ground and machined and are rust resistant. Application: Typically used to couple hydraulic pumps to electric motors, but can be used in a wide variety of applications. (Maximum Angular Offset capability is 1. Maximum Parallel Offset capability is 0.015 inches). Material: FC050-FC095: Sintered Metal. FC099-FC225: Machined Cast Iron. Operating Temperature Range: Buna-N Spider: -20F to 180F. Urethane Spider: -80F to 180F. Note: Horsepower (HP) Ratings in tables below are based on driving hydraulic pumps (Service Factor of 1.5) at 1800 RPM. For other speeds or applications see tables in Technical Information section. Dimensions, Max. Speeds, Common Motor Shafts & Technical Information: page 612
Maurey Hi-Q Coupling Spiders (1 required)

Catalog Part No. Maurey Part No. Material Buna-N Buna-N Urethane Urethane Urethane Fits Coupling Size(s) FC075 FC099-FC100 FC090-FC095 FC099-FC100 FC110 Wt. 1.00 0.07 0.03 0.06 0.11 Price Each
Fluid Conveying
C1CL38 B075 C1CL39 B099 C1DM68 U090 C1DM69 U100 C1EF92 U110
Maurey Hi-Q Coupling Halves (2 required) Miscellaneous Products

Catalog Part No. Maurey Part No. Bore Key B U (in) (in) HP HP 1/2 5/8 3/4 1 1-1/8 1/2 5/8 3/4 7/8 1 1-1/8 3/4 7/8 1 1-1/8 1-5/8 1/8 3.2 5.0 3/16 3.2 5.0 3/16 3.2 5.0 1/4 1/4 -3.2 5.0 3.2 5.0 Wt. 0.93 0.94 0.90 0.82 0.78 Price Each
C1FC39 FC095-1/2-W-1/8K C1EP72 FC095-5/8 C1CQ91 FC095-3/4 C1CQ90 FC095-1 C1EP71 FC095-1-1/8 C1FC41 FC100-1/2 C1CQ96 FC100-5/8 C1CQ95 FC100-3/4 C1CQ97 FC100-7/8 C1CQ92 FC100-1 C1EP74 FC100-1-1/8 C1CQ94 FC100-1-3/8 C1CR12 FC110-3/4 C1EP79 FC110-7/8 C1ZV66 FC110-1 C1EP77 FC110-1-1/8 C1CR11 FC110-1-5/8
7.2 11.9 1.79
3/16 7.2 11.9 1.70 3/16 7.2 11.9 1.50 3/16 7.2 11.9 2.00 1/4 1/4 7.2 11.9 1.60 7.2 11.9 1.49
1-3/8 5/16 7.2 11.9 1.30 3/16 13.1 28.8 3.45 3/16 13.1 28.8 3.32 1/4 13.1 28.8 3.24 1/4 13.1 28.8 3.17 3/8 13.1 28.8 2.73
B HP: Horsepower Rating of Buna-N Spider Coupling driving hydraulic pump (SF 1.5) at 1800 RPM. U HP: Horsepower Rating of Urethane Spider Coupling driving hydraulic pump (SF 1.5) at 1800 RPM.
381

Power Unit Accessories Pump/Motor & Pump/Engine Mounts
Horizontal Pump/Motor Mounts (For AC Motors)

Power Unit design is greatly simplified by using Pump/Motor Mounts to mount flange-mount pumps to C-Face electric motors. Accurate shaft alignment is guaranteed, while foot brackets, coupling guards, shims, risers and mounting plates are eliminated. Features: Permanent mold casting of lightweight, high strength aluminum alloy. Molded OSHA orange coupling access covers (on models larger than 56C size). Pre-cast drain hole for easy detection of shaft seal leak. Bolt Kits are included with adaptors and contain all necessary hardware to mount adaptor to motor, and pump to adaptor. Guaranteed Tolerances: Within 0.003 inches concentric from the motor pilot to the pump pilot. Mounting faces are parallel to each other and perpendicular to the pilot centerline within 0.002 inches. Nema C-Face Motor Dimensions: page 614 Flexible Couplings: page 381
Horizontal Pump/Motor Mounts (For AC Motors)

Catalog Part No. Magnaloy Model C1EQ81 M056522A Pump Flange Size SAE A 2(4) Bolt Motor NEMA Frame Sizes 56C 143TC/145TC Face To Face XM (in) 5.25 Motor Mounting Dimensions (in) AJ=5.88 BF=0.44 BD=6.81 AK=4.501 AJ=7.25 BF=0.53 BD=9.00 AK=8.501 AJ=7.25 BF=0.53 BD=9.00 AK=8.501 Mount Dimensions (in) Z=4.15 XM=5.25 CL=4.56 PP=3.251 Z=5.00 XM=5.81 CL=5.06 PP=3.251 Z=5.00 XM=6.81 CL=6.06 PP=3.251 Pump Mounting Dimensions (in) J2=4.19 F2=3/8-16 J4=4.12 F4=3/8-16 J2=4.19 F2=3/8-16 J4=4.12 F4=3/8-16 J2=4.19 F2=3/8-16 J4=4.12 F4=3/8-16 Price Each
Material Cast Aluminum
Wt. 5.00
C1EQ84
M182582A
SAE A 2(4) Bolt
182TC - 256TC Range
5.81
Cast Aluminum
5.92
C1EQ85
M182682A
SAE A 2(4) Bolt
182TC - 256TC Range
6.81
Cast Aluminum
3.00
382

Power Unit Accessories Sight Glasses, Sight Plugs, Magnetic Drain Plugs
Sight Glasses (Reservoir Mounting)
Fluid Conveying
Front Mount Styles (A, C, F): Can be installed from the outside when reservoirs do not have access to the interior and tank wall thickness permits tapping. Can also be installed when there is access to inside the reservoir with furnished nuts. Construction allows 1/16 inch alignment adjustment to facilitate mounting. Back Mount Styles (B, D): Must have access to the inside of the reservoir to install. Pipe Thread Mount Style (E): Installed from the outside of reservoir. Threads into pipe couplings welded in reservoir, or into thick wall reservoir tapped for pipe thread. Construction allows 1/16 inch alignment adjustment to facilitate mounting. Note: If the fluid in the reservoir is red in color, and a sight glass with a Card Type thermometer with red fluid in the thermometer is used, the temperature will not be readable. A Dial Type thermometer would be a better choice. Or a Card Type model with blue fluid may be ordered. Sight Glasses (Reservoir Mounting)
Catalog Part No. Stauff Model Key Length A 5 inch Thermometer None Body Material Seals Other Thread A Features Size (in) Front Mount Front Mount Front Mount Front Mount Front Mount Front Mount B (in) C (in) Wt. 0.59 Price Each
C1KH54 SNA127BS0U
Black Epoxy-coat Buna-N ed metal Black Epoxy-coat Buna-N ed metal Black Epoxy-coat Buna-N ed metal Aluminum Buna-N
1/2-20 5.00 3.00 6.25 1/2-20 10.0 8.00 11.2 0 5 12 mm 5.00 6.25
C1KH56
SNA254BS0U
10 inch
None Card Type, Red Fluid Card Type, Red Fluid Card Type, Red Fluid
0.78
C1ZS99 SNA127BST12 C1CX25 G1615-05-A-1 C1FP64 SNA254BSTU
C C C
5 inch 5 inch 10 inch
0.53 0.50 0.89
1/2-20 5.00 3.50 6.63 1/2-20 10.0 8.00 11.2 0 5 1/2-20 5.00 3.00 6.25
Black Epoxy-coat Buna-N ed metal
C1KH55 SNA127BST1U
5 inch
Black Dial Type, 7.9 inch Epoxy-coat Buna-N probe ed metal
0.63
Note: G models are Lube Devices.
383

Power Unit Accessories Sight Glasses, Sight Plugs, Magnetic Drain Plugs
Sight Plugs
Sight Plugs
Catalog Part No. Mfg. Name Thread Stauff Lube Devices Lube Devices 1/2 NPT 3/4 NPT 3/4 NPT Max. Working Cork Temp. Pressure C D E Reflector Ball Rating (in) (in) (in) (psi) No Yes No No Yes No 500F 500F 3500 PSI 10 PSI 0.75 0.56 0.78 1.12 5 1.00 Price Each
Model No.
Material Nickel Plated Steel Body, Clear Glass Lens Brass Body, Buna-N Seals, Stainless & Aluminum Reflector Electroless Nickel Plated Steel Body
Wt. 0.07 0.11
C1KH47 SLW-08 C1ZX60 LSP151-05-02 C1DD30 LSP51-5
Fluid Conveying
1500 PSI @ 69F 0.75 1.06 0.94
0.20
Magnetic Drain Plugs
Magnetic Drain Plugs

Catalog Part No. C1EE57 Lube Devices Part No. MDP104 Pipe Thread 1/2-14 NPT B (in) C (in) Wt. 0.08 Price Each
0.63 0.22
384
Hydraulic System Accessories

Accumulators & Accessories
3000 PSI Bottom-Repairable Accumulators Accumulators Inc Type S3

Features: Bottom repairable style. Design factors exceed the requirements of all standard codes. Each vessel individually tested and registered. Integrated pressure relief design. Cannot be disassembled under pressure. Application: Uses include supplementing pump flow, reduction of installed power, providing a standby source of fluid energy, shock absorption and surge dampening. CAUTION: Precharge with dry nitrogen gas only. Never operate accumulator without proper precharge. Release all system pressure and stored pressure before attempting any maintenance or service. Maximum Operating Pressure: 3000 PSI. Operating Temperature Range: Buna-N Bladder: 35F to 160F (Optimal Range). -10F to 210F (Peak Range). Accumulator Sizing Information: page 1334 3000 PSI Bottom-Repairable Accumulators Accumulators Inc Type S3
Catalog Part No. C1CG97 C1CG96 Accumulators Inc. Model A1QT3100-3 A13100-3 Size 1 Quart 1 Gallon Fluid Port SAE-12 SAE-20 Shell Material Standard Standard Bladder Length O.D. Material (in) (in) Buna-N Buna-N 11.40 17.00 4.50 6.70 Wt. 9.50 33.81 Price Each
Standard Shell Material: Chrome-moly steel, SA-372 Type V Grade 1 Class B.
Fluid Conveying
Parts for Accumulators Inc. Type S3 3000 PSI Bottom-Repairable Accumulators

Catalog Part No. C1CH65 C1CH68 C1CH69 C1CH66 C1CH73 Part Number AI-1-3KT AI-2.5-3KT AI-5-3KT AI-10-3KT AI-S-305 Description Bladder Kit, 1 Gallon, Buna-N. Includes Bladder & Gas Valve Assy, O-Ring and Metal O-Ring Backup. Bladder Kit, 2-1/2 Gallon, Buna-N. Includes Bladder & Gas Valve Assy, O-Ring and Metal O-Ring Backup. Bladder Kit, 5 Gallon, Buna-N. Includes Bladder & Gas Valve Assy, O-Ring and Metal O-Ring Backup. Bladder Kit, 10 Gallon, Buna-N. Includes Bladder & Gas Valve Assy, O-Ring and Metal O-Ring Backup. Gas Valve Hex Jam Nut for sizes 1-15 Gallon Wt. 0.25 2.00 Price Each
3.33 3.00 0.10
385

Accumulators & Accessories
Accumulator Charging and Gauging Assemblies

Warning: Use dry nitrogen gas ONLY. Pre-Charging Instructions: (A) Remove gas valve guard (protective cap) and valve cap. (B) Fill accumulator approximately 10% full with system fluid through fluid port for a cushion. (C) Install recommended Gas Charging Assembly on the gas valve stem at top of unit. (D) Pre-Charge very slowly up to 25 PSIG using dry nitrogen gas only. A gas regulator is recommended. WARNING: Initial pre-charging at a rate above 25 PSIG can cause bladder to burst. (E) Continue pre-charging to desired pressure by increasing nitrogen flow. (F) Remove charging assembly, replace valve cap and guard.
Accumulator Charging and Gauging Assemblies

Catalog Part No. C1JA44 Accumulators Inc. Model AI-CG3-3KT-SS Description Charging & Gauging Assembly for 3000 PSI Accumulators. Contains all items pictured. Wt. 2.31 Price Each
Fluid Conveying
386

Flow Meters
Flow Meters For Petroleum Fluids
Features: Accuracy 2% full scale. Repeatability 1%. Can be installed in any position and outer housing can be rotated 360 for easy reading. Application: Used as a visual indicator of flow rate in hydraulic systems. Can be installed temporarily or permanently. Standard models do not tolerate reverse flow. A Reverse Flow Option is available for aluminum and stainless steel models. (Flow measured in one direction only). Materials: Body available in anodized aluminum, brass or stainless steel. Piston & cone is anodized aluminum in aluminum and stainless models, brass in brass models. Stainless steel spider plate, spring and fasteners. Carbon steel retaining ring and retaining spring. Polycarbonate guard. Aluminum scale support. Nylon end caps. Viton pressure seals. Buna-N guard seal and bumper. Operating Temperature Range: -20F to 240F. Flow Meters For Petroleum Fluids
Catalog Part No. Hedland Model Size 1/2 1/2 3/4 1-1/4 Ports 1/2-14 NPT 1/2-14 NPT 3/4-14 NPT Flow Range (GPM) 0.5 to 5 1 to 15 3 to 30 Body Material Aluminum Aluminum Aluminum Aluminum Maximum 100% Flow C Operating Pressure Pressure (psi) Drop (psi) B (in) (in) 3500 3500 3500 3500 6.0 18.5 16.5 27.5 D (in) Wt. 0.91 0.50 1.62 5.00 Price Each
Fluid Conveying
C1BW29 601-005 C1BW31 601-015 C1BY55 701-030 C1CA30 801-150
6.60 2.07 2.40 6.60 2.07 2.40 7.20 2.48 2.85 12.20 4.12 4.72
1-1/4-11-1/2 NPT 10 to 150
387

Gauges - Brass/PowerFlex Movements, Brass Connection
Window: Ashcroft Models: Polycarbonate. ENFM Models: Transparent acrylic. Male Connection: Ashcroft 1005/1005S Models: Brass, 0.013" throttle plug (1000 PSI and above). Ashcroft 1008 A/AL Models: Brass, 0.013" throttle plug (except vacuum & 15 PSI models). ENFM Models: Brass with removable restrictor screw (0.012 passage). Bourdon Tube: Ashcroft 1005/1005S Models: C-shaped bronze (vacuum to 600 PSI & compound models), helical bronze (1000-6000 PSI). Ashcroft 1008 A/AL Models: C-shaped bronze (vacuum to 600 PSI & compound models), helical bronze (1000-6000 PSI), helical stainless steel (10,000-15,000 PSI). ENFM Models: Phosphor bronze, soft soldered C form up to 0-600 PSI range, silver brazed spiral form on 0-1000 PSI through 0-15,000 PSI range. Movement: Ashcroft Models: Patented PowerFlex movement with polyester segment. ENFM Models: Brass. Operating Pressures: Ashcroft recommendation: Normal operating pressure be confined to 25%-75% of the scale. If pulsation is present in the process, maximum operating gauge pressure should not exceed 50% of the full-scale range. ENFM recommendation: 75% of full scale for normal steady pressure. 66% of full scale for fluctuating pressure. Accuracies: Ashcroft Models: 3-2-3% of span (3% over first & last quarters of the scale, 2% over the middle half of the scale. ENFM Models: 2% of full scale (liquid filled), 1% of full scale (dry, except 6001-6004-6007 models which are 2%). Accessories: Gauge Accessories page 391
Plain Case - Bottom Connection
Fluid Conveying

Catalog Part No. C1JS88 C1JS89 C1JV18 Part Number 001262 001279 003587 Mfg. Ashcroft Ashcroft Ashcroft Mfg. Model 20 1005SH 02L 100# 20 1005SH 02L 160# 63 1008AL 02L 30HG Size & Range 2" 0-100 PSI 2" 0-160 PSI 2.5" 0-30 HG Design Male Type Conn. Dry Dry Case Dimensions (in) Price Wt. Each 0.20 0.20 0.49 0.49 0.50 0.49 0.32 0.49 0.48 0.48 0.50
1/4 NPT 304 SS A=2.05 B=1.04 C=2.09 D=0.34 1/4 NPT 304 SS A=2.05 B=1.04 C=2.09 D=0.34
Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46
C1JW64 210015
A=2.48 B=1.21 Ashcroft 63 1008AL 02L 30HG/15# 2.5" 30 HG-15 PSI Liquid Filled 1/4 NPT 304 SS C=2.71 D=0.46 Liquid A=2.48 B=1.21 Ashcroft 63 1008AL 02L 30HG/30# 2.5" 30 HG-30 PSI Filled 1/4 NPT 304 SS C=2.71 D=0.46 Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft 63 1008AL 02L 15# 2.5" 0-15 PSI Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46 Dry A=2.48 B=1.21 1/4 NPT 304 SS C=2.71 D=0.46
C1JV28 C1JT36 C1KK83 C1JU52 C1JU81 C1JU89 C1JU96
003594 003495 759426272811 003501 003518 003525 003532
63 1008S 02L 2 BAR/0/30 2.5" 0-30 PSI/BAR PSI 63 1008AL 02L 30# 63 1008AL 02L 60# 63 1008AL 02L 100# 63 1008AL 02L 160# 2.5" 0-30 PSI 2.5" 0-60 PSI 2.5" 0-100 PSI 2.5" 0-160 PSI
Liquid 1/4 NPT 304 SS A=2.48 B=1.21 C=2.71 D=0.46 Filled Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46
388

Catalog Part No. C1JZ30 C1JW28 C1JU97 C1JU99 C1JX52 Part Number 003549 209569 003556 003570 213986 Mfg. Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Mfg. Model 63 1008AL 02L 200# 63 1008A 02L 300# 63 1008AL 02L 300# 63 1008AL 02L 600# 63 1008AL 02L 1000# 63 1008AL 02L 1500# 63 1008AL 02L 2000# 63 1008AL 02L 3000# 63 1008AL 02L 4000# 63 1008AL 02L 5000# 63 1008AL 02L 6000# 63 1008AL 02L 10000# SPG-063-10000-5 63 1008AL 02L 15000# 100 1008AL 02L 100# 100 1008SL 04L 3000# Size & Range 2.5" 0-200 PSI 2.5" 0-300 PSI 2.5" 0-300 PSI 2.5" 0-600 PSI 2.5" 0-1,000 PSI 2.5" 0-1,500 PSI 2.5" 0-2,000 PSI 2.5" 0-3,000 PSI 2.5" 0-4,000 PSI 2.5" 0-5,000 PSI 2.5" 0-6,000 PSI 2.5" 0-10,000 PSI 2.5" 0-10000 PSI 2.5" 0-15,000 PSI 4" 0-100 PSI 4" 0-3,000 PSI Design Male Type Conn. Case Dimensions (in) Price Wt. Each 0.49 0.30 0.50 0.50
Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Dry A=2.48 B=1.21 1/4 NPT 304 SS C=2.71 D=0.46
Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 D=0.46 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Liquid 1/4 NPT 304 SS A=2.5 B=1.2 Filled C=2.5 D=0.51 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 D=0.46 Liquid 1/4 NPT 304 SS A=3.94 B=1.24 Filled C=4.16 D=0.44 Liquid 1/2 NPT 304 SS A=3.59 B=1.21 Filled C=3.87 D=0.41
0.50 0.49 1.25 0.50 0.50 0.50 0.50 1.40 0.35 0.50 1.03 0.90
C1KA76 209972-ASHCRO Ashcroft FT C1KA91 209989-ASHCRO Ashcroft FT C1JW38 C1JY54 C1JW50 C1JW97 C1JX83 C1KN52 C1JX86 C1JV95 209996 246793 210008 212781 226511 SPG-063-10000-5 226528 003624 Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Stauff Ashcroft Ashcroft
Fluid Conveying
068933 C1JW13 SS Connection, Ashcroft Tube & Movement
Plain Case - Center Back Connection

Catalog Part No. C1JS87 Part Number 000180 Mfg. Ashcroft Ashcroft Mfg. Model 15 1005H 01B 30# 63 1008AL 02B 30HG 63 1008AL 02B 60# Size & Range 1.5" 0-30 PSI 2.5" 0-30 HG 2.5" 0-60 PSI Design Male Type Conn. Dry Case Dimensions (in) Price Wt. Each 0.13 0.53 0.53
1/8 NPT Steel A=1.60 B=0.99 C=1.62
C1KD71 210350
Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71
C1KB36 210244-ASHCR Ashcroft OFT
389


Catalog Part No. C1JV90 Part Number 003600 Mfg. Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Ashcroft Mfg. Model 63 1008AL 02B 100# 63 1008AL 02B 160# 63 1008AL 02B 200# 63 1008AL 02B 300# 63 1008AL 02B 600# 63 1008AL 02B 1000# 63 1008AL 02B 2000# 63 1008AL 02B 3000# 63 1008AL 02B 5000# 63 1008AL 02B 6000# Size & Range 2.5" 0-100 PSI 2.5" 0-160 PSI 2.5" 0-200 PSI 2.5" 0-300 PSI 2.5" 0-600 PSI 2.5" 0-1,000 PSI 2.5" 0-2,000 PSI 2.5" 0-3000 PSI 2.5" 0-5000 PSI 2.5" 0-6000 PSI Design Male Type Conn. Case Dimensions (in) Price Wt. Each 0.54 0.50 0.53 0.53 0.54 0.54 0.54 0.54 0.54 0.54
Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 Liquid 1/4 NPT 304 SS A=2.48 B=1.21 Filled C=2.71 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71 Liquid A=2.48 B=1.21 Filled 1/4 NPT 304 SS C=2.71
C1JW71 210251 C1KB76 210268 C1KB96 210275
C1KC15 210299 C1KC84 210305 C1KD37 210329 C1JX50 213870
C1KC89 210343 C1KC90 217564
Fluid Conveying
Accessories for Ashcroft Plain Case - Center Back Connection Gauges

Catalog Part No. Part Number Description Front Flange Kit, for 2-1/2" Ashcroft Gauges U-Clamp Kit, for 2-1/2" Ashcroft Gauges Wt. 0.05 0.10 Price Each
C1KA24 101A140-03 C1KA28 101A164-01
U-Clamp Kit 101A164-01: Fits 2-1/2" Ashcroft Gauges. Panel Hole 2-17/32 Minimum / 2-9/16 Maximum. 16-20 in-lbs torque on lockwasher nuts. Front Flange Kit 101A140-03: Fits 2-1/2" Ashcroft Gauges. Panel Hole 2-17/32 Minimum / 2-9/16 Maximum. 2.95" Bolt Circle, 0.150" Screw Hole Size. Note: 3ea 6-32 Screws & Nuts Included.
390

Gauge Accessories
Deltrol GS20S Gauge Snubber
The GS20S gauge snubber is a fixed orifice valve which protects gauges and other delicate instruments from hydraulic shock pressure surges and pulsations, yet provides rapid and smooth response to pressures up to 5,000 PSI. Deltrol GS20S Gauge Snubber
Catalog Part No. C1FJ30 Deltrol Model GS20S Ports 1/4 NPT Maximum Operating Pressure (Non-Shock) 5000 PSI Material Steel Orifice Dia (in) 0.015 Wt. 0.07 Price Each
Gauge Boots
Gauge Boots
Catalog Part No. C1GK59 Stauff Model SPG63RB-BLACK Fits Gauge Size & Style 2-1/2 Diameter with Bottom Connection Color Black Wt. 0.12 Price Each
391

Geared Flow Dividers
2-Section Geared Flow Dividers
Fluid Conveying
Features: High strength permanent mold cast iron housing. Precision needle bearings. Hardened shafts joined by internally hardened round keys and keyways to eliminate stress concentrations and wear. Precise machined trapping relief grooves provide constant filling and discharging to assure quiet operation and maximum bearing life. O-Ring seals between sections. Precision dowel pin alignment between sections. Application: Equal flow two-section units divide flow from a common pump source into two separate flows of equal proportion. Can be used to synchronize the operation of two cylinders. For greatest efficiency and accuracy, flow dividers should be used at near maximum rated inlet flow. Provide over-pressure protection (relief valves) in each circuit. Do not use Teflon tape. RPM Range: 500 RPM Minimum. 3500 RPM Maximum. Recommended Filtration: 25 Microns. 2-Section Geared Flow Dividers
Delta Power Model P23 Max. Diff. Pressure Maximum Recommended Recommended Between Continuous Minimum Inlet Maximum Inlet Sections Pressure Flow (GPM) Flow (GPM) (PSI) (PSI) 3.0 6.4 21.0 44.0 1000 1000 1500 1500
Catalog Part No. C1DG32
Displ. (in/rev) 0.702 1.462
Inlet Port 3/4 NPTF 3/4 NPTF
Outlet Port 1/2 NPTF 3/4 NPTF
Wt. 15.80 9.25
Price Each
C1DG34 P27
Maximum Intermittent Pressure: 2500 PSI (PM2), 2000 PSI (PM6, P23, P27, P43, P47).
392

Geared Flow Dividers
2-Section Geared Flow Dividers With Differential Pressure Relief Valves
Features: Differential pressure relief valves. Up to 3,000 PSI inlet pressure. Up to 4500 PSI outlet pressure. High pressure seal. Hardened steel gears. Cast iron bodies. Application: Equal flow two-section units divide flow from a common pump source into two separate flows of equal proportion. Can be used to synchronize the operation of two cylinders. For greatest efficiency and accuracy, flow dividers should be used at near maximum rated inlet flow. Over-pressure protection is provided by built-in relief valves in each circuit. RPM Range: 1500 RPM Minimum. 4500 RPM Maximum. Differential Pressure Relief Valves: Adjustable from 500-1000 PSI (Set at 750 PSI). 2-Section Geared Flow Dividers With Differential Pressure Relief Valves
Max. Max. Continuous Intermittent Diff. Pressure Diff. Pressure Recommended Recommended Between Between Minimum Inlet Maximum Inlet Sections Sections Outlet Port Flow (GPM) Flow (GPM) (PSI) (PSI) 7/8-14 SAE 9.0 18.0 1200 2000
Catalog Part No. C1AK29
Barnes Displ. Model (in/rev) 1300637 0.517
Inlet Port 7/8-14 SAE
Wt. 10.25
Price Each
393

Heat Exchangers
Air Cooled Units for Mobile Service Thermal Transfer M & MR Series
Fluid Conveying
Features: High strength construction, rugged steel manifolds. Optional internal by-pass valves eliminate piping and reduce costs. Heat removal to 90,000 BTU/Hr. Oil flows up to 100 GPM. NPT ports are standard (SAE Straight Thread and Male JIC 37 flare ports are optional). Materials: Copper tubes. Aluminum fins. Steel manifolds, connections, turbulators, relief valve. Pressure Ratings: 300 PSI Operating. 300 PSI Test. Maximum Operating Temperature: 400F. Performance Curves & Selection Procedure: page 621 Air Cooled Units for Mobile Service Thermal Transfer M & MR Series
Face Area (sq. ft.) Wt. 0.81 1.21 3.25 12.00 12.00 34.00
Catalog Thermal Transfer Part No. Model By-Pass Relief A (in) B (in) C (in) D (in) E (in) F (in) G (in) C1JJ45 M-15-S No No No 8.00 14.50 10.88 18.22 16.72 5.50 19.72 12.00 14.50 14.88 18.22 16.72 9.50 19.72 24.00 19.50 26.88 23.22 21.72 21.50 24.72 C1EQ78 M-20 C1DD55 M-30
Ports (H) SAE-16 1 NPT 1-1/4 NPT
Price Each
394

Heat Exchangers
Air Cooled Units for Mobile Service Thermal Transfer DH & DHR Series
Features: High performance oil turbulators. Lightweight. Low cost. Optional internal by-pass valves eliminate piping and reduce costs. Heat removal to 175,000 BTU/Hr. Oil flows up to 150 GPM. NPT ports are standard (SAE Straight Thread ports are optional). Materials: Copper tubes. Aluminum or steel fins. Aluminum turbulators. Copper manifolds and brass connections (models DH-051 - DH-447), Steel manifolds and steel connections (models DH-513 - DH670). Pressure Ratings: 300 PSI Operating. 300 PSI Test. Maximum Operating Temperature: 350F. Performance Curves & Selection Procedure: page 616 Air Cooled Units for Mobile Service Thermal Transfer DH & DHR Series
Catalog Thermal Transfer Part No. Model By-Pass Relief A (in) B (in) C (in) D (in) E (in) C1JB72 DHR-249-1-1-30 Yes (30 PSI) 18.00 19.75 18.73 24.00 22.88 Ports (F) 3/4 NPT G (in) 1.12 Qty Face Mtg Area Kits (sq. ft.) Wt. 6 2.47 12.00 Price Each
Fluid Conveying
Parts & Accessories for Thermal Transfer DH & DHR Series

Catalog Part No. C1JM78 Part Number 84740 Description Optional Rubber Shock Mount, Without Strap. Qty Required is 4ea (DH-062 thru DH-227), 6ea (DH-249), 8ea (DH-326 thru DH-447) Wt. 0.17 Price Each
395

Heat Exchangers
Air Cooled Powered Fan Units for Mobile Service Thermal Transfer MF Series
Fluid Conveying
Features: Available with 12 or 24VDC electric motor(s), hydraulic motor(s) or without motor(s). Heavy duty construction, rugged steel manifolds. Optional serviceable relief by-pass valve (30 or 60 PSI). Optional electronic fan control kit (Part No. 96171). Heat removal to 50,000 BTU/Hr. Oil flow to 150 GPM. NPT, SAE straight thread O-Ring and Male 37 JIC flare ports available. Materials: Copper tubes. Aluminum fins. Steel manifolds, turbulators. High impact plastic fan assembly. Pressure Ratings: 300 PSI Operating. Maximum Operating Temperature: 350F. DC Motor Models: 12VDC: 12.5 Amps with one fan, 25 Amps with two fans. 24VDC: 6.3 Amps with one fan, 12.6 Amps with two fans. Hydraulic Motor Models: 0.22 in motor displacement. 2000 PSI maximum. 1000 PSI allowable back pressure. 2200 RPM maximum fan speed. 2.1 GPM at 300 PSI with one fan. 4.2 GPM at 300 PSI with two fans. Performance Curves & Selection Procedure: page 622 Air Cooled Powered Fan Units for Mobile Service Thermal Transfer MF Series
Catalog Thermal Transfer Part No. Model C1DE87 MF-30-1-4A C1JP41 MF-30-1-4B C1DE88 MF-60-1-4A Motor Type 12VDC 24VDC 12VDC By-Pass Relief A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) No No No 16.58 19.75 6.10 21.25 17.25 2.50 16.58 19.75 6.10 21.25 17.25 2.50 9.00 9.00 3.06 3.06 Ports (J) 1-1/2 NPT 1-1/2 NPT 1-1/2 NPT Wt. 41.00 41.00 78.00 Price Each
30.83 19.75 6.10 21.25 17.25 2.50 18.00 5.68
396

Heat Exchangers
Water Cooled Industrial Units (Internal By-Pass Valve Optional) Thermal Transfer EK Series
Features: High efficiency finned bundle design. Compact size. Low cost. Optional built-in SURGE-CUSHION relief by-pass valve. Heat removal to 400 HP. Oil flow rates up to 80 GPM. Large oil connections for minimum entering and exiting flow restriction. Removable end caps for easy tube cleaning. Mounting brackets can be positioned in 90 increments. Materials: Copper or Copper-Nickel tubes. Aluminum fins. Grey iron end caps. Steel shell, tubesheets, baffles, mounting brackets. Nitrile Rubber/Cellulose Fiber gaskets. Aluminum foil nameplate. Pressure Ratings: 500 PSI Maximum Shell Side Pressure (Hydraulic). 150 PSI Maximum Tube Side Pressure (Water). Maximum Operating Temperature: 250F. Performance Curves & Selection Procedure: page 618 Water Cooled Industrial Units (Internal By-Pass Valve Optional) Thermal Transfer EK Series
Catalog Part No. Thermal Transfer Model Tube Cooling Side Tube Surge B Passes Cushions Material A (in) (in) 2-Pass No Copper C (in) E G Oil Ports Water (in) F (in) (in) K (in) (M) Ports (N) Wt. 1-1/2 NPT 3/4 NPT 20.00 Price Each
EK-712-T C1CP20 (with Foot Brackets)
0.44 x 14.19 5.00 5.47 3.52 7.00 3.57 0.75
397

Pressure Switches
Pressure Switches (Single) Delta Power PS Series
Features: Oil-tight cast iron body. Gasketed removable cover. Micro switch rated for 2 million cycles. Specially designed actuator consisting of a dampened piston and positive stop striker plate. Electrical Ratings: 15 Amps and 1/2 HP at 125VAC or 250VAC. 1/2 Amp at 125VDC. 1/4 Amp at 250VDC. 5 Amps at 120VAC L. Pressure Switches (Single) Delta Power PS Series
Catalog Part No. Delta Power Model Pressure Adjustment Range (psi) 500-3000 Fixed Reset Pressure Differential (psi) 50-150 Wt. 1.09 Price Each
Fluid Conveying
C1DH33 PS-3000
398

Pressure Switches
Pressure Switches (Single) Barksdale C9612 Series
Features: Sealed Piston Extremely Long Life Oil & Dust Tight Easy Setpoint Adjustment High Reliability High Proof Pressure Anodized aluminum enclosure Tamper-proof adjustment screw cover Nema 3 rated. Operating Temperature Range: -20F to 165F. Accuracy: 2% of the adjustable range. Switch Type: SPDT snap action, single circuit. Switch Rating: 10 Amps @ 125, 250, or 480 VAC. 0.3 Amps @ 250 VDC. Class B limit switch. Wiring Identification: Purple = Common, Red = NO, Blue = NC. Wetted Parts: Nickel plated aluminum process fitting. Buna-N o-ring (standard). 416 stainless steel piston. Anodized aluminum enclosure. Pressure Connection: 1/4-18 NPT Female. Pressure Switches (Single) Barksdale C9612 Series
Catalog Part No. Barksdale Model C1CN24 C9612-3 Adjustable Range Decreasing (PSI) 250 Min, 2650 Max Adjustable Range Increasing (PSI) 280 Min, 3000 Max Apprx. Deadband (PSI) 30-350 Proof Pressure (PSI) 7000 Wt. 1.79 Price Each
399

Pressure Switches
Pressure Switches (Single - Double - Triple) Magnaloy PS Series
Fluid Conveying
Features: As many as three switching elements can be independently adjusted over the full pressure range. A single pressure tap (1/8 Female NPT) serves all piston mounted microswitches. Viton seal with Teflon back-up ring. Oil Tight NEMA 12 case. Standard 1/2 inch conduit connection. Pressure Ratings: Rated Pressure 4000 PSI. Burst Pressure 12,000 PSI. Operating Temperature Range: -20F to 160F. Repeatability: 2% of set pressure. Electrical Ratings: 4 Amps at 250VAC. 3 Amps at 12VDC. Wiring Identification: Switch 1: White = Common, Red = NO, Black = NC. Switch 2: White w/ One Yellow Stripe = Common, Red w/ One Yellow Stripe = NO, Black w/ One Yellow Stripe = NC. Switch 3: White w/ Two Yellow Stripes = Common, Red w/ Two Yellow Stripes = NO, Black w/ Two Yellow Stripes = NC. Pressure Switches (Single - Double - Triple) Magnaloy PS Series
Catalog Part No. Magnaloy Model Configuration C1DH34 PS-400-115 Single Switch Double Switch C1DH35 PS-400-215 Pressure Adjustment Range (psi) 300-2600 300-2600 Fixed Reset Pressure Differential (psi) Apprx. 300 PSI @ 1125 Setting Apprx. 300 PSI @ 1125 Setting Wt. 0.75 0.75 Price Each
400

Pressure Test Systems - Voss
Voss Pressure Test Systems

Application: Voss monitoring couplings allow equipment to be monitored, tested and bled rapidly, accurately and cleanly. These tasks can be performed while the system is operating, because the monitoring coupling can be connected under pressure to the appropriate instruments or testing devices. When the connecting hose is coupled, or plugged in, a check valve in the monitoring coupling is opened and pressure measurements can be made. A built-in o-ring seal prevents fluid from escaping. When the connecting hose is uncoupled, or removed, the check valve closes. Hose Assembly Construction: Nylon inner core, Kevlar reinforcement and black Nylon outer cover. Operating Temperature Range: -40F to +212F.
Catalog Part No. Voss Model Thread A (Port) 1/4 NPT Thread B 1/4 BSPP Length (in) 1.57 Wt. 0.15 Price Each
C1BY25 686-950
Gauge Couplings
401

Pressure Test Systems - Stauff
Stauff Test
Fast Coupling For: Monitoring and control of pressure Venting Sampling. Advantages: Test system at working pressure Connection is leakproof before connection is opened Simple connection to measurement, control and switching devices Self-locking metal protective cap Minimizes introduction of contamination into hydraulic systems. Working Pressure: Maximum working pressure 5800 PSI (Test 10, Test 12 and Test 20 Hoses), 9000 PSI (Test 15 Hoses) Connection under pressure up to 5800 PSI (Test 12 and Test 20), 9000 PSI (Test 15). Materials: Metal parts: Steel Ball: Stainless Steel Seals: Buna-N (-4F to 195F), Viton (-4F to 392F), EPDM (-40F to 302F) Hose: Polyamide (-31F to 212F). Media: Suitable for hydraulic oils and other mineral based fluids (check compatibility of seal material) For use with other liquid or gaseous media please contact us for availability of alternate seals.
Catalog Part No. C1KN32 Stauff Model SMB20-C1 SMK-20-1/4NPT-VD SMK20-1/4NPT-VD Description Triple Gauge Test Kit. See footnote for components. 1/4 NPT Pressure Test Coupling. Viton Seal. 1/4 NPT Pressure Test Coupling. Viton Seal. Wt. 5.70 0.16 0.16 0.15 0.17 0.16 0.12 0.11 0.15 0.22 Price Each
Fluid Conveying
C1KH52 C1KH53 C1KN36 C1KN37
7/16-UNF Pressure Test Coupling. SMK20-7/16UNF-VE Viton Seal. SMK20-9/16UNF-VE 9/16-UNF Pressure Test Coupling. Viton Seal. SMK20-G1/4-VB SMD20-1/4NPT SKK12-1/8-NPT-VD SMS20/U1/4-1000M SMS20/U1/4-3000M 1/4 BSPP Pressure Test Coupling. Viton Seal. 1/4 NPT Gauge Adapter. Viton Seal. 1/8 NPT Test Coupling. Viton Seal. Test Hose. 39 inches long. Test Hose. 120 inches long.
Triple Gauge Kit
C1KN38 C1KN35 C1FF28 C1KN39 C1KN40
Kit Contains: 2 ea 60 inch hoses (SMS20-060-B), 3ea direct gauge adaptors (SMD20-1/4NPT-V), 2ea unions (SSV20/20), 1ea -30inHg to 30 PSI gauge (WPG63-3030S), 1ea 1000 PSI gauge (WPG63-1000S), 1ea 7500 PSI gauge (WPG63-7500S), 2ea 1/8 NPT pressure test couplings (SMK20-1/8NPT-VD), 2ea 1/4 NPT pressure test couplings (SMK20-1/4NPT-VD), 1ea 7/16-20 (SAE-04) pressure test coupling (SMK20-7/16UNF-VE), 1ea 9/16-18 (SAE-06) pressure test coupling (SMK20-9/16UNF-VE), 1ea 1-1/4NPT Female QD Fitting (SQD-04NF-C).
402
High Force Hydraulics - Enerpac

Single-Acting Cylinder & Pump Sets

The Quickest and Easiest Way to Start Working Right Away! Optimum match of individual components Sets include 6 ft. safety hose, calibrated gauge with gauge adaptor All hand pumps are two-speed 10,000 PSI Maximum Operating Pressure.
Single-Acting Cylinder & Pump Sets

Catalog Part No. C1JM19 Enerpac Model Cylinder Pump P-80 Hand Pump Hose HC-7206 Gauge GF-813P Gauge Adapter GA-3 Wt. 105.00 Price Each
SCH-603H RCH-603 (60 ton, 3.00 stroke, 9.75 collapsed ht)
SCH Models: Feature RCH single-acting hollow cylinder, for pushing & pulling applications.
High Pressure Rubber Hydraulic Hoses

Inside Diameter : 1/4 and 3/8 inch. Length: 2-50 feet. Maximum Operating Pressure: 10,000 PSI. Hose Oil Capacity: When using longer hose lengths, it is sometimes necessary to fill the pump reservoir after filling the hoses. Use the following formulas to determine the hose oil capacity. For 1/4 ID hoses: Capacity (in) = 0.5892 x Length (ft). For 3/8 ID hoses: Capacity (in) = 1.3608 x Length (ft). Warning: Do not exceed 10,000 PSI maximum pressure. Do not handle hoses which are under pressure. Features: Rubber cover with 2 layers of braided steel. Designed to comply with Material Handling Institute IJ-100 hose specification. Flexible, with little "memory", is the best choice for long hose runs. Crimped-on rubber strain relief for improved life and durability.
High Pressure Rubber Hydraulic Hoses

Catalog Part No. Enerpac Model Hose I.D. (in) 1/4 1/4 Hose Length (ft) 6 10 End 1 3/8 NPT 3/8 NPT End 2 CH-604 Male Coupler Half CH-604 Male Coupler Half Wt. 3.00 4.30 Price Each
C1CY33 HC-9206 C1CY34 HC-9210
403

High-Flow Coupler
Features: Standard equipment on most Enerpac cylinders. Recommended for use on all Enerpac pumps and cylinders where space and porting permits. Includes "2-in-1" dust cap for use on male and female coupler halves. Maximum Operating Pressure: 10,000 PSI Warning: Couplers should be pressurized only when completely connected and should not be coupled or uncoupled when pressurized.
High-Flow Coupler
Catalog Part No. Enerpac Model Maximum Flow Capacity (in) 2,500 2,500 Configuration Complete Set Male Half Thread 3/8 Male x Female NPT 3/8 Female NPT Connected Dust Cap(s) Length (in) CD-411 CD-411 2.72 -Wt. 0.65 0.31 Price Each C1CM15 C-604 C1CN37 CH-604
Parts for Enerpac High-Flow Couplers

Catalog Part No. C1FZ31 Part Number C604K1 Description Newer Style Seal Kit for C-604 Coupler. Has Blue/Green Polyurethane Lip Seal. Older Style Seal Kit for C-604 Coupler. Has Black O-Ring Seal. Wt. 0.01 0.01 Price Each
Fluid Conveying
C1CN23 C604K
Regular Spee-D-Coupler
Features: For medium duty applications (hand pumps as an example). Includes female aluminum dust cap. Maximum Operating Pressure: 10,000 PSI. Warning: Couplers should be pressurized only when completely connected and should not be coupled or uncoupled when pressurized.
Regular Spee-D-Coupler
Catalog Part No. Enerpac Model Maximum Flow Capacity (in) 462 Configuration Female Half Thread 3/8 Male NPT Connected Dust Cap(s) Length (in) Z-410 -Wt. 0.32 Price Each C1CK80 AR-400
404

Regular Coupler
Features: For use with small cylinders and hand pumps. Includes female aluminum dust cap. Maximum Operating Pressure: 10,000 PSI. Warning: Couplers should be pressurized only when completely connected and should not be coupled or uncoupled when pressurized.
Regular Coupler
Catalog Part No. Enerpac Model Maximum Flow Capacity (in) 462 462 Configuration Female Half Male Half Thread 1/4 Male NPT 1/4 Female NPT Connected Dust Cap(s) Length (in) Z-640 ---Wt. 0.15 0.13 Price Each C1CK81 AR-630 C1CH60 AH-630
Gauge Adaptors
Features: For easy mounting of a pressure gauge onto your system. Male end screws into pump or cylinder port, female end accepts hose or coupler, 3rd port is for gauge connection. Maximum Operating Pressure: 10,000 PSI.
Fluid Conveying
Gauge Adaptors
Catalog Part No. Enerpac Model Gauge Port 1/2 NPT Male End 3/8 NPT Female End 3/8 NPT Dimensions (in) 6.10L x 1.25W x 1.25H Wt. 1.94 Price Each
C1CX31 GA-2
405
High Force Hydraulics - Power Team

Power Team Products

Cylinders: page 406 Pump Mounted Valves: page 411 Pumps: page 412 Hoses - Couplers - Gauges - Fluids: page 421 Manifolds - Fittings - InLine Valves: page 424 Jacks: page 426 Hydraulic Tools: page 428 Mechanical Tools: page 431 Pullers & Puller Sets: page 432
Fluid Conveying
General Purpose Single-Acting Cylinders C Series 5-100 Ton

Rugged, high quality cylinder used for lifting and pressing. ASME B30.1 10,000 PSI. Features: Aluminum bronze bearing reduces wear caused by off-center loads Maximum sized springs speed piston return and increase spring life Solid steel cylinder body for durability Chrome plated piston rod resists wear and corrosion Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base Base mounting holes standard on 5 through 55 ton cylinders; optional on 75 and 100 ton cylinders A 3/8" NPTF female half coupler is standard.
General Purpose Single-Acting Cylinders C Series 5-100 Ton Indexes & Technical Information
Piston Cylinder Cylinder Oil Retracted Extended Rod Piston Rod Effective Catalog Power Team Capacity Stroke Capacity Height A Height B Collar Diameter Internal Area Part No. Model (in) Thread D (tons) (in) (in) (in) H (in) Thread J (sq in) C1JN63 C1JN64 C1JN69 C1JN70 C1KL36 C1JN45 C1JN47 C1JN48 C1JN49 C51C C53C C55C C59C C57C C101C C104C C106C C108C 5 5 5 5 5 10 10 10 10 10 1 3-1/4 5-1/4 9-1/4 7-1/4 1 2-1/8 4-1/8 6-1/8 8-1/8 1.1 3.2 5.2 9.2 7.2 2.2 4.8 9.2 13.7 19.9 4-11/32 6-1/2 8-1/2 12-3/4 10-3/4 3-5/8 4-3/4 6-3/4 9-3/4 11-3/4 5-7/16 9-3/4 13-3/4 22 18 4-5/8 6-7/8 10-7/8 15-7/8 19-7/8 1-1/2-16 1-1/2-16 1-1/2-16 1-1/2-16 1-1/2-16 2-1/4-14 2-1/4-14 2-1/4-14 2-1/4-14 2-1/4-14 1 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 3/4-16x5/8 3/4-16x5/8 3/4-16x5/8 3/4-16x5/8 3/4-16x5/8 1-8x3/4 1-8x3/4 1-8x3/4 1-8x3/4 1-8x3/4 0.994 0.994 0.994 0.994 0.994 2.236 2.236 2.236 2.236 2.236 Price Each
Wt. 2.25 3.26 4.00 5.80 4.97 4.00 5.00 6.70 9.40 11.00
C1CM22 C102C
406

Hydraulic Power & Control General Purpose Single-Acting Cylinders C Series 5-100 Ton
Piston Cylinder Cylinder Oil Retracted Extended Rod Piston Rod Effective Catalog Power Team Capacity Stroke Capacity Height A Height B Collar Diameter Internal Area Part No. Model (in) Thread D (tons) (in) (in) (in) H (in) Thread J (sq in) C1JN42 C1JN52 C1JN54 C1JN59 C1JN60 C1JN61 C1JN56 C1JN57 C1KV82 C1JN67 C1JN68 C1JN65 C1JN41 C1010C C152C C156C C252C C254C C256C C2510C C2514C c258c C554C C556C C5513C C1006C 10 15 15 25 25 25 25 25 25 55 55 55 100 10-1/8 2-1/8 6-1/8 2 4 6-1/4 10-1/4 14-1/4 8-1/4 4-1/4 6-1/4 13-1/4 6-5/8 22.6 6.7 19.2 10.3 20.6 32.2 52.8 73.5 42.5 46.9 69.0 146.3 137.0 13-3/4 5-7/8 10-11/16 6-1/2 8-1/2 10-3/4 14-3/4 18-3/4 12-3/4 9-1/8 11-1/8 18-1/8 13-1/4 23-7/8 8 16-13/16 8-1/2 12-1/2 17 25 33 21 13-3/8 17-3/8 31-3/8 19-7/8 2-1/4-14 2-3/4-16 2-3/4-16 3-5/16-12 3-5/16-12 3-5/16-12 3-5/16-12 3-5/16-12 3-5/16-12 5-12 5-12 5-12 6-1/4-12 1-1/2 1-3/4 1-3/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 3-1/8 3-1/8 3-1/8 4-1/8 1-8x3/4 1-8x3/4 1-8x3/4 1-1/2-16x7/8 1-1/2-16x7/8 1-1/2-16x7/8 1-1/2-16x7/8 1-1/2-16x7/8 1-1/2-16x7/8 None None None None 2.236 3.142 3.142 5.15 5.15 5.15 5.15 5.15 5.15 11.04 11.04 11.04 20.62 Price Each
Wt. 13.00 8.90 15.30 13.90 17.60 21.70 29.30 36.80 25.60 41.30 51.00 78.00 91.00
C Series Cylinder Accessories

Catalog Part No. Part Number Description Threaded Adapter, 10 or 15 Ton Cylinders, 1-13/16" overall length, 1-1/16" large thread length, 1-5/8" Dia., 1-1/4-11-1/2NPT x 1-8UNC2A Thread Wt. 0.60 Price Each
Fluid Conveying
C1KN84 202179
Low Profile Single-Acting Cylinders RLS Series 5-150 Ton

Ideal for confined areas from 15/8" to 4" clearance. ASME B30.1 10,000 PSI. Features: Cylinder body, piston and gland nut Power Tech treated for corrosion and abrasion resistance Standard domed piston rod (5-30 ton) or swivel cap (50-150 ton) minimize effects of off-center loading Unique heavy duty spring provides fast piston return A 9796 3/8" NPTF female half coupler is standard with each cylinder (the RLS50 has a 3/8" coupler which is not angled). Oil ports are 3/8" NPTF (except the RLS50). Couplers on all cylinders, except RLS50, are angled upward for extra clearance.
Low Profile Single-Acting Cylinders RLS Series 5-150 Ton

Catalog Part No. C1JQ60 C1JQ62 C1JQ65 Power Team Model RLS100 RLS200 RLS500S Piston Cylinder Oil Retracted Extended Rod Effective Stroke Capacity Height A Height B Diameter Area (in) (in) (in) (in) H (in) (sq in) 9/16 7/16 7/16 1/2 5/8 0.62 1.0 2.0 3.2 6.0 1-5/8 1-3/4 2 2-5/16 2-5/8 2-3/16 2-3/16 2-7/16 2-13/16 3-1/4 5/8 3/4 1-1/8 1-3/8 1-3/4 0.994 2.236 4.430 6.492 9.621 Price Each
Cylinder Capacity (tons) 5 10 20 30 50
Wt. 2.20 3.30 5.60 8.60 14.00
C1JQ64 RLS50
C1JQ63 RLS300
407

Hydraulic Power & Control Low Profile Single-Acting Cylinders RLS Series 5-150 Ton
Catalog Part No. C1JQ61 C1JS67 Power Team Model RLS1000S RLS1500S Piston Cylinder Oil Retracted Extended Rod Effective Stroke Capacity Height A Height B Diameter Area (in) (in) (in) (in) H (in) (sq in) 5/8 9/16 12.3 17.2 3-3/8 4 4 4-9/16 2-1/2 3 19.635 30.680 Price Each
Cylinder Capacity (tons) 100 150
Wt. 30.00 52.00
Shorty Single/Double-Acting Cylinders RSS Series 10-250 Ton

Ideal for confined areas from 31/2" to 117/16" clearance. ASME B30.1 10,000 PSI. Features: Bronze plated piston rods and gland nuts resist scoring and corrosion Heavy duty return spring (except for double-acting models) provides fast piston return & low collapsed height Coupler on 10 thru 50 ton models is angled upward 5 for added clearance Grooved piston top keeps load from sliding Cylinders can be dead-ended at full capacity Removable carrying handles on 100 ton and 250 ton models.
Fluid Conveying
Shorty Single/Double-Acting Cylinders RSS Series 10-250 Ton

Catalog Part No. C1JQ68 C1JQ69 C1JQ71 C1JQ67 Power Team Model RSS101 RSS202 RSS502 RSS1002 Piston Cylinder Cylinder Oil Capacity Retracted Extended Rod Effective Capacity Stroke (in) Height A Height B Diameter Area (in) Push/Return (tons) (in) (in) H (in) (sq in) 10 20 30 50 100 1-1/2 1-3/4 2-7/16 2-3/8 2-1/4 3.4 / -7.7 / -15.8 / -22.8 / -44.2 / -3-1/2 3-3/4 4-5/8 5 5-1/2 5 5-1/2 7-1/16 7-3/8 7-3/4 1-1/2 2-5/32 2-1/2 3-1/8 4-3/8 2.24 4.43 6.49 9.62 19.63 Price Each
Type Single Acting Single Acting Single Acting Single Acting Single Acting
Wt. 6.00 9.90 14.70 23.20 47.30
C1JQ70 RSS302
408

Center Hole Single-Acting Cylinders RH Series 10-100 Ton

Ideal for pulling and tensioning of cables, anchor bolts, forcing screws, etc. ASME B30.1 10,000 PSI. Features: Interchangeable piston head inserts provide versatility of application 12, 20*, 30*, 50, 60 Ton Single-Acting Models Feature Threaded Collar Withstands full dead-end loads Corrosion resistant standpipe has Power Tech treatment All cylinders except RH120 are furnished with a 9796 3/8" NPT female half coupler Aluminum cylinder body and piston are featured on the RHA306 cylinder. * Model RH203 and RHA306 do not feature the collar thread. See the chart below.
Center Hole Single-Acting Cylinders RH Series 10-100 Ton

Catalog Part No. C1JQ55 C1KN92 C1KN93 C1KN94 C1JQ57 C1JQ59 C1JS66 Piston Center Power Cylinder Oil Retracted Extended Rod Hole Collar Team Capacity Stroke Capacity Height A Height B Diameter Diameter Model (tons) (in) (in) (in) (in) Thread D H (in) (N) RH102 RH121 RH123 RH202 RH203 RH306 RH603 10 12 12 20 20 30 30 60 2-1/2 1-5/8 3 2 3 2-1/2 6 3 5.52 4.49 8.29 9.45 11.76 15.85 38.1 37 5-5/16 4-13/16 7-1/4 6-1/8 6-1/16 6-1/4 9-3/4 9-1/4 7-13/16 6-7/16 10-1/4 8-1/8 9-1/16 8-3/4 15-3/4 12-1/4 None 2-3/4-16 2-3/4-16 3-7/8-12 None 4-3/4-12 4-3/4-12 6-1/4-12 2-1/16 1-3/8 1-3/8 2-1/8 2-3/4 3-1/4 3-1/4 3-19/32 49/64 51/64 13/16 1-5/64 1-3/64 1-19/64 1-9/32 2-1/8 Cylinder Insert Effective Thread Area O Wt. (sq in) 1-3/4-12 None None 1-9/16-1 6 2-1/4-12 2-3/4-12 2-3/4-12 3-12 2.21 2.76 2.76 4.72 3.92 6.34 6.34 12.31 9.00 6.60 8.90 16.10 20.00 25.60 39.00 60.00 Price Each
Fluid Conveying
C1JQ58 RH302
Note: 60 through 100 ton models are supplied with carrying handles. Note: RH120 & RH121T models do not have an internal threaded insert, but do have a 3/4-16 internal thread. Model RH120 inlet port is 1/4 NPTF.
409

Double-Acting Cylinders RD Series 10-500 Ton

High tonnage premium design for high cycle life. ASME B30.1 10,000 PSI. Features: Perfect for bridge lifting, building reconstruction, shipyard, utility and mining equipment maintenance Aluminum bronze overlay bearings provide long life, chrome plated piston rod resist corrosion Load cap snaps out to expose internal piston rod threads for pulling applications; threads withstand full tonnage Grooved ring pattern in load cap helps guard against load slippage Each cylinder has two 9796 3/8" NPTF female half couplers Built-in safety relief valve prevents over-pressurization of the retract circuit All models include mounting holes and collar threads.
Double-Acting Cylinders RD Series 10-500 Ton

Catalog Part No. Cylinder Oil Piston Cylinder Power Capacity Capacity Retracted Extended Collar Rod Piston Rod Effective Team (tons) Stroke (in) Height A Height B Thread Diameter Internal Thread Area (sq in) Model Push/Pull (in) Push/Pull (in) (in) D H (in) & Depth J (in) Push/Pull 25 / 8 55 / 28 6-1/4 32.2 / 10.1 270.7 / 116.0 12-3/8 18-5/8 19-7/32 4-12 5-12 2-1/8 2-5/8 3-7/8 1-1/2-16x1 5.15 / 1.61 6-1/4 69.0 / 35.2 12-31/32 13-1/8 20-9/32 1-11/16-8x1-3/16 11.04 / 5.63 2-3/4-12x1-5/32 20.63 / 8.84 Price Each
Wt. 39.80 61.40 181.00
Fluid Conveying
C1JQ52 RD256 C1JQ54 RD556
C1JQ50 RD10013 100 / 44
33-13/32 6-7/8-12
Hydraulic Spreaders
Features: Use to lift machines or as a clamp; spread concrete forms or rebar or perform straightening jobs. Conforms to ASME B30.1 standard. High strength alloy steel forged upper and lower jaws on HS2000. Jaws are spring-return; retract automatically when pressure is released. HS2000: 1-ton capacity spreader. Full 2,000 lbs. capacity at 10,000 psi. with 4" spread. Can be dead-ended at 4" spread under full load. Needs only 9/16" clearance to engage jaws. HS3000: 1-1/2-ton capacity spreader. Full 3,000 lb. capacity at 10,000 psi. with 11-1/2" spread. Greater than competitive units. Needs only 1-1/4" clearance to engage jaws. Can be dead-ended at 11-1/2" spread at full load.
Hydraulic Spreaders
Catalog Part No. C1KM24 Power Team Model HS3000 Capacity (tons) Collapsed Tip Clearance (in) 1 1-1/2 9/16 1-1/4 Extended Tip Spread (in) 4 11-1/2 Oil Cap. (in) 0.63 3.5 Wt. 4.80 25.27 Price Each
C1KM23 HS2000
410

Pump-Mounted Manual Valves 4-Way 3-Position Tandem Center

Designed for use with Power Team air, gasoline and electric powered hydraulic pumps. Application: Single strand, double-acting stressing jacks with Power Wedge seater. Actuation: Lever operated, detent positioned. Operation: 1. With valve in center position, pump is started. 2. Cable is inserted into stressing tool, valve is placed in A position. Pull portion of stressing tool is pressurized to specified level for proper cable tensioning (A port is checked internally, can only be released by building pressure in B position). 3. Valve is placed in B position, which is pressure controlled and will not exceed 6,400 psi. Return portion of stressing tool is pressurized and will release A port when pressure reaches approximately one-half the A port pressure. A port remains open as long as this pressure differential is maintained. 4. Pump is stopped, valve is placed in A position, releasing B port pressure. Used on these pumps: PA17*, PA46*, PA55, PE17*, PE21*, PE30, PE46*, PE55, PE60, PE84, PE120, PE200, PE400, PG30*, PG55, PG120, PG400, PQ60 and PQ120 series. * These pumps may have reduced first flow stage characteristics due to internal valve restrictions.
Pump-Mounted Manual Valves 4-Way 3-Position Tandem Center

Catalog Part No. C1KV67 C1KV68 C1JN18 Power Team Model 9500 9506 9628 Description 4-way/3-position, tandem center, manual valve 4-way/3-position, tandem center, manual valve, Posi-Check feature Post tensioning valve for 10,000 psi (max.) singleacting/ Power Wedge seater. Wt. 4.45 5.36 5.40 Price Each
CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a No. 9596 Load Lowering Valve or No. 9720 Counter Balance Valve in conjunction with the directional valve used in your application. Important: Conversion kit 251528 must be used when mounting any of these valves on PA17 or PE17 pumps.
411

Single-Speed Single-Acting Hand Pumps P Series 12 to 55 in Reservoir

Best suited for applications where there is little or no free travel. Features: All metal construction, won't burn through in welding environments Formed metal handle provides less flex, and reduces operator fatigue Convenient fill port on P23 and P55 allows pumps to be filled in a horizontal or vertical position Fill cap seal acts as safety valve preventing over-pressurizing of reservoir Relief valve inboard of check valve prevents loads from drifting down Large valve knob gives added control for slowly metering loads down Standard type hydraulic fluid is included.
Single-Speed Single-Acting Hand Pumps P Series 12 to 55 in Reservoir

Catalog Part No. C1JP92 Power Team Model P12 Volume Reservoir per Maximum Handle Oil Capacity Outlet Stroke Pressure Effort (in) (in) (psi) (lbs) Total/Usable Port 0.069 0.160 10,000 10,000 75 145 12 / 9 55 / 45 3/8 NPTF 3/8 NPTF Price Each
For Use With Single Acting Cylinders Single Acting Cylinders
Dimensions (in) A=4.00 E=13.50 L=3.38 A=6.50 B=21.00 E=23.00 L=4.75
Wt. 5.70 15.80
Fluid Conveying
C1DG61 P55
Note: Pumps include a 2-way valve.
412

Two-Speed Single Acting Hand Pumps P Series 24.4 to 55 in Reservoir

Pump automatically shifts into the high pressure lift stage upon contact with the load. Features: All metal construction won't burn through in welding environments Two-speed reduces handle strokes so you work faster and easier Formed metal handle provides less flex, and reduces operator fatigue Convenient fill port allow pumps to be filled in a horizontal or vertical position Relief valve inboard of check valve prevents loads from drifting down Large valve knob gives added control for slowly metering loads down Standard type hydraulic fluid is included. P19L & P59L Models: More usable oil volume use with larger or longer stroke cylinders True unloading valve set for 850 PSI provides more efficiency and lower handle force Link design reduces handle effort by 40% Durable aluminum reservoir, manifold, and end cap Ergonomic non-slip handle grip provides more comfort Spring loaded handle lock incorporated into handle.
Two-Speed Single Acting Hand Pumps P Series 24.4 to 55 in Reservoir

Volume per Maximum Reservoir Stroke Pressure Handle Oil Capacity Effort Outlet (in) (psi) (in) (lbs) Total/Usable Port LP/HP LP/HP 325 / 10,000 850 / 10,000 325 / 10,000 850 / 10,000 99 78 145 104 24.4 / 20 29 / 27 55 / 45 69 / 66 3/8 NPTF 3/8 NPTF 3/8 NPTF 3/8 NPTF
Fluid Conveying
Catalog Part No. C1JP95 C1JP96
Power Team Model P19 P19L
For Use With
Dimensions (in) A=5.50 B=14.63 E=13.69 L=4.00 A=5.50 E=13.69 A=7.00 B=21.00 E=23.00 L=4.75 A=7.00 E=21.00
Wt. 6.60 5.10 17.20
Price Each
Single Acting Cylinders 0.305 / 0.076 / Single Acting Cylinders 0.250 0.050 Single Acting Cylinders Single Acting Cylinders 0.662 / 0.160 0.720 / 0.150
C1JQ14 P59 C1JQ15 P59L
8.90
Note: Pumps include a 2-way valve.
413

Two-Speed Single/Double Acting Hand Pumps P Series 0.65 to 2.5 Gal Reservoir
Best suited for applications where there is little or no free travel. Features: Rugged all metal construction for strength and durability that wont burn through in welding environments Heavy-duty, formed metal handle provides less flex, and less operator fatigue than round or composite handles Convenient fill port on P23 and P55 allows pumps to be filled in a horizontal or vertical position Fill cap seal acts as safety valve to prevent over-pressurizing of reservoir Relief valve inboard of check valve prevents loads from drifting down Large valve knob gives added control for slowly metering loads down Standard type hydraulic fluid is included.
Two-Speed Single/Double Acting Hand Pumps P Series 0.65 to 2.5 Gal Reservoir
Volume per Maximum Reservoir Stroke Pressure Handle Oil Capacity Effort Outlet (in) (psi) (in) (lbs) Total/Usable Port LP/HP LP/HP 2.60 / 0.160 2.60 / 0.160 7.35 / 0.294 2.60 / 0.160 2.60 / 0.160 7.35 / 0.294 325 / 10,000 325 / 10,000 325 / 10,000 325 / 10,000 325 / 10,000 325 / 10,000 140 140 90 140 140 90 152 / 137 346 / 310 577 / 460 152 / 137 346 / 310 577 / 460 3/8 NPTF 3/8 NPTF 3/8 NPTF 3/8 NPTF 3/8 NPTF 3/8 NPTF
Fluid Conveying
Catalog Part No. C1JP93 C1JP98 C1JQ11 C1JP94 C1KM84 C1JQ12
Power Team Model P159 P300 P460 P159D P300D P460D
For Use With Single Acting Cylinders Single Acting Cylinders Single Acting Cylinders Double Acting Cylinders Double Acting Cylinders Double Acting Cylinders
Dimensions (in) A=7.75 B=20.50 E=22.75 L=3.75 A=8.25 B=21.00 E=22.63 F=8.50 A=11.13 B=31.00 E=24.00 F=29.25 A=7.75 B=20.50 E=22.75 L=3.75 A=8.25 B=21.00 E=22.63 F=8.50 A=11.13 B=31.00 E=24.00 F=29.25
Wt. 26.20 55.30 54.90 27.90 57.00 57.90
Price Each
Note: Pumps for use with single-acting cylinders include a 2-way valve. Pumps for use with double-acting cylinders include a 4-way valve.
414

Air-Driven Single Speed Pumps PA6 Series 0.45 to 2.5 Gal Reservoir
Compact, lightweight and portable. Single-Speed pumps designed to drive single-acting cylinders. Features: The power unit of choice for major manufacturers of auto body, frame straighteners and other equipment Operate at 40-100 psi shop air pressure at the pump Internal relief valve protects circuit components, air inlet filter protects motor Serviceable pump motor is not a throw away, providing economical repair Permanently vented reservoir cap dBA 85 at 10,000 psi Standard type hydraulic fluid is included.
Air-Driven Single Speed Pumps PA6 Series 0.45 to 2.5 Gal Reservoir
Catalog Part No. Power Team Model Reservoir Oil Capacity Outlet (in) Total/Usable Port 105 / 98 3/8 NPTF Price Each
For Use With Single Acting Cylinders
Description Base model pump with high density polyethylene reservoir.
Dimensions (in) 9.50L x 5.00W x 7.75H
Wt. 14.00
Fluid Conveying
C1JQ18 PA6
Air-Driven 2-Speed Pumps PA17 Series 2 Gal Res

Rotary-style air motor. use where air is preferred source of energy, where electricity is unavailable or sparks are a concern. Features: Two-speed operation for high speed cylinder advance. Durable two gallon thermoplastic reservoir. (Metal reservoir conversion kits are available.) Features air motor capable of starting under full load.
Air-Driven 2-Speed Pumps PA17 Series 2 Gal Res

Catalog Part No. Power Team Model For Use With Cyl. Type Single Acting Description Base model pump with Advance/Return function Oil Capacity (gal)/Usable (cu.in.) 2/295 Dimensions (in) H x W x D 14-1/8x11-3/8x9-1/4 Wt. (lb) 40.00 Price Each
C1KW40 PA172
415

Single-Phase 2-Speed Pumps PE17 Series 2 to 2.5 Gal Reservoir

For maintenance and construction applications. Features: For use with single-acting or double-acting cylinders at operating pressures to 10,000 psi For intermittent duty; starts under full load Equipped with 1?2 hp, 3,450 rpm, singlephase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. cord) Low amperage draw; small generators and low amperage circuits can be used as power source Extremely quiet noise level (67-81 dBA) Standard type hydraulic fluid is included. Maximum Pressure Output: 10,000 PSI. Oil Delivery: 290in/min @ 0 PSI, 190in/min @ 100 PSI, 20in/min @ 5,000 PSI, 16in/min @ 10,000 PSI. Current Draw @ 10,000 PSI: 10 amps @ 115VAC.
Fluid Conveying
Single-Phase 2-Speed Pumps PE17 Series 2 to 2.5 Gal Reservoir

Power Catalog Team For Use Description Part No. Model With Reservoir Oil Capacity Usable Dimensions (in) (in) 11.38L x 9.25W x 18.50H
Valve Type
Function
Control Switch
Motor
Wt.
Price Each
C1JQ21 PE172
Remote 1/2 HP On-Off 110/115 Single 115VAC, Pump on to extend, off 2-Way Motor VAC Acting thermoplastic 2-Position to hold, off & manually Control 50/60HZ Cylinders reservoir shift valve to return (115VAC), Single 10 ft Phase Remote On-Off Motor Control (24VDC), 10 ft 1/2 HP 220VAC 50HZ Single Phase
295
45.00
220VAC Single Pump on to extend, off 50HZ, 2-Way C1JQ22 PE172Acting 50-220 thermoplastic 2-Position to hold, off & manually Cylinders reservoir shift valve to return
295
11.38L x 9.25W x 18.50H
45.00
C1KW42 PE174
1/2 HP Single & Remote 110/115 115VAC, Double thermoplastic 4-Way Motor VAC Advance Hold Return Acting 3-Position Control (10 50/60HZ reservoir Cylinders ft) on/off Single Phase Remote On-Off Motor Control (24VDC), 10 ft 1/2 HP 220VAC 50HZ Single Phase
295
11.38L x 9.25W x 18.50H
45.00
Pump on, manually Single & 220VAC 4-Way shift valve to extend or 50HZ, C1JQ24 PE174- Double 50-220 Acting thermoplastic 3-Position retract, manually shift valve to hold Cylinders reservoir
295
11.38L x 9.25W x 18.50H
45.00
Note: Models PE174 and PE174M advance position holds pressure with motor shut off. Note: Models PE172 and PE172M advance position holds pressure with motor shut off. Return position advances cylinder with motor running and returns cylinder with motor shut off.
416

Single-Phase 2-Speed Pumps PE46 Series 2.5 Gal Reservoir

Best suited for under the roof maintenance and production applications. Features: Two-speed high performance pump For use with single- or double-acting cylinders at operating pressures to 10,000 psi Equipped with a 11?2 hp, 3,450 rpm single-phase, 60 Hz thermal protected induction motor that starts under full load. Noise level of 77-81 dBA All equipped with a 10 foot remote control except PE462S which has a 25 foot remote control 24 volt control circuit on all units with remote control CSA rated for intermittent duty Standard type hydraulic fluid is included. Oil Delivery: 500in/min @ 0 PSI, 450in/min @ 100 PSI, 51in/min @ 5,000 PSI, 46in/min @ 10,000 PSI. Current Draw @ 10,000 PSI: 25 amps @ 115VAC. Reservoir Usable Capacity: 590 in.

Catalog Part No. Power Team Model For Use With Description Single & Double Acting Cylinders Valve Type Function Pump on, manually shift valve to extend or retract, manually shift valve to hold Control Switch Remote On-Off Motor Control (24VDC), 10 ft Motor 1-1/2HP 220VAC 50Hz Single Phase Dimensions (in) Wt. Price Each
C1JQ27 PE464-50-220
220VAC 50HZ
4-Way
590
79.00
Note: Models PE462S and PE464S advance position holds pressure with motor shut off. Note: Model PE462A is not to be used for lifting (When pump is shut off, oil returns to reservoir). Note: Models PE462 and PE464 advance position holds pressure with motor shut off. Return position returns cylinder.
417


Heavy duty multiple-applications pump. Heavy construction and concrete stressing. Low voltage starting possible. Features: 1-1/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 amps at full load, starts at reduced voltage CSA rated for intermittent duty 10 foot remote motor control (except PE552S which has a 25 foot remote motor and valve control) True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure Reservoirs available in sizes up to 10 gallons Light weight and portable. Best weight to performance ratio of all Power Team pumps Standard type hydraulic fluid is included. Maximum Pressure Output: 10,000 PSI. Oil Delivery: 704in/min @ 0 PSI, 440in/min @ 700 PSI, 74in/min @ 5,000 PSI, 56in/min @ 10,000 PSI. Current Draw @ 10,000 PSI: 25 amps @ 115VAC, 15 amps @ 230VAC 50/60 Hz. dBa @ Idle/10,000 PSI: 90/89. Reservoir Usable Capacity: 525 in.
Fluid Conveying

Catalog Part No. Power Team Model For Use With Single Acting Cylinders Description Valve Type Function Pump on to extend, off to hold, off & manually shift valve to return Control Switch Motor Dimensions (in) 14.00L x 9.50W x 18.25H Wt. Price Each
C1JQ29 PE552-50-220
220VAC 50HZ
3-Way
Remote 1-1/8HP On-Off 220VAC Motor 50Hz Control Single (220VAC), Phase 10 ft
65.00
C1JQ30 PE554
Double Acting Cylinders
115VAC
4-Way
Remote 1-1/8HP Pump on, manually On-Off 110/115 shift valve to extend or Motor VAC retract, manually shift Control 50/60Hz valve to hold (115VAC), Single 10 ft Phase Remote 1-1/8HP Pump on, manually On-Off 220VAC shift valve to extend or Motor 50Hz retract, manually shift Control Single valve to hold (220VAC), Phase 10 ft Pump on, manually shift valve to pull, to hold (pump off), to release (pump on) Remote 1-1/8HP 110/115 On-Off VAC Motor Control 50/60Hz (115VAC), Single 10 ft Phase
14.00L x 9.50W x 18.25H
65.00
C1JQ31 PE554-50-220
Double Acting Cylinders
220VAC 50HZ
4-Way
14.00L x 9.50W x 18.25H
65.00
C1JQ32 PE554PT
115VAC, for use with Restricted, single or see next double acting 4-Way column Power Seat, Stressing Jacks ONLY Double Acting Cylinders 220VAC 50HZ, remote controls motor & valve
14.00L x 9.50W x 18.25H
65.00
C1JQ34 PE554S-50-220
Remote 1-1/8HP Motor & 220VAC Pump on, energize Valve 4-Way valve to extend or 50Hz Control retract, pump off to hold (220VAC), Single Phase 10 ft
14.00L x 9.50W x 18.25H
65.00
418

Note: Model PE552 holds with motor shut off. Note: Models PE553, PE554 and PE554W have Posi-Check valve design, which guards against pressure loss when valve is shifted from advance to hold position. Note: Model PE554C valving allows alternate and independent operation of two different spring return tools. Valve holds pressure only while valve is in A or B position with motor shut off. Note: Model PE552A is not to be used for lifting.
Parts for PE55 Pumps

Catalog Part No. C1KH86 C1KH87 C1KH88 C1KJ62 C1KK33 Part Number 10804 10805 10806 25017 420050-1 Motor Brushes Brush Holder Brush Holder Cap Cord, 10 foot, for Hand Control Remote Cover for Hand Control Remote Description Wt. 0.01 0.09 0.01 1.25 0.10 Price Each
419


Compact, light weight pump. Excellent choice for rugged applications and low voltage starting. Features: Long, trouble free life in the most demanding work environments. For operating single- or double-acting cylinders, or stressing jacks Powered by 11?8 hp, 115 volt, 60/50 Hz single phase motor. Starts under load, even at the reduced voltages at construction sites Optional fan-driven external oil cooler includes rollover guard Insulated carrying handle Integral 4" dia. fluid-filled pressure gauge with steel bezel complies with ASME B40.1 Grade A. With 0 to 10,000 psi pressure range in 100 psi increments Sealed 3?4 gallon (usable) reservoir. Reservoir drain port is standard. Standard oil level sight gauge for accurate oil level monitoring External spin-on filter removes contaminants from circulating oil to maximize pump, valve and cylinder/tool life Standard type hydraulic fluid is included. Maximum Pressure Output: 10,000 PSI. Oil Delivery: 704in/min @ 0 PSI, 440in/min @ 700 PSI, 74in/min @ 5,000 PSI, 56in/min @ 10,000 PSI. Current Draw @ 10,000 PSI: 25 amps @ 115VAC. dBa @ Idle/10,000 PSI: 80/85. Reservoir Usable Capacity: 157 in.
Fluid Conveying

Catalog Power Team Part No. Model For Use With Restricted, see next column Description Valve Type Function Control Switch Motor 1-1/8HP 115VAC 50/60Hz Single Phase Dimensions (in) 11.50L x 9.31W x 18.25H Wt. Price Each
C1JQ37 PE604PT
115VAC, for use with single or Pump on, manually shift double acting 4-Way valve to pull, to hold Power Seat, 3-Position (pump off), to release Stressing Jacks (pump on) ONLY 220VAC, for use with single or Pump on, manually shift double acting 4-Way valve to pull, to hold Power Seat, 3-Position (pump off), to release Stressing Jacks (pump on) ONLY
On / Off / Pulse
51.00
Restricted, C1JQ38 PE604PT-220 see next column
1-1/8HP 220/230V On / Off / AC Pulse 50/60Hz Single Phase
11.50L x 9.31W x 18.25H
51.00
Note: Unloading pressure is 1,000 PSI.
420

Hydraulic Hoses Polyurethane/Rubber/Non-Conductive

Features: All have plastic hose guards except for the 1/4" I.D. polyurethane hoses which have spring guards 3/8" NPTF fittings on both ends Operating pressure is 10,000 psi All comply with MHI standard IJ100. Polyurethane Hose: Made up of nylon core tube with polyester fiber reinforcement which will withstand the minimum SAE bend radius without shortening service life. These hoses last up to seven times longer than rubber hose, and are suitable for continuous service at temperatures from -40 to 150 F. Rubber Hose: 2-ply rated hose reinforced with two braids of high tensile steel wire. The rubber covering is oil and weather resistant. These hoses are MSHA approved. Non-Conductive Hose: For applications requiring electrical isolation by the hose, non-conductive hose has a leakage factor of less than 50 microamperes, considered a safe level of conductivity by SAE standards. The covering is polyurethane and colored orange for easy identification as non-conductive hose. The covering is not perforated, preventing moisture from entering the hose and affecting its overall conductivity. All nonconductive hoses have a minimum burst pressure of 40,000 psi.
Hydraulic Hoses Polyurethane/Rubber/Non-Conductive

Catalog Part No. C1KL17 C1KL18 C1JN26 C1JN25 C1KL19 C1KL20 C1JN23 C1JN22 C1KL16 C1JN24 C1KV74 C1KV75 C1JN27 C1KL22 C1KL21 C1KG41 C1KG42 C1KG43 Power Team Model 9765 9766 9767 9764 9769 9771 9756 9754 9757 9758 9759 9760 9777 9778 9775 TWH15 TWH20 TWH50 Fittings Hose Both Length Ends (ft) 3/8 NPTF 3/8 NPTF 3/8 NPTF 3/8 NPTF 2 ft 3 ft 6 ft 6 ft Guard Type Spring Spring Spring Spring Spring Spring Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic Maximum Minimum Coupler Operating Burst & Dust Pressure Pressure Cap (psi) (psi) No No No Yes No No No Yes No No No No No No No Yes Yes Yes 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 40,000 40,000 40,000 40,000 4.35 20.00 5.00 8.00 9.50 17.00 Price Each
Fluid Conveying
Hose Type Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Rubber, Wire-braid Rubber, Wire-braid Rubber, Wire-braid Rubber, Wire-braid Rubber, Wire-braid Rubber, Wire-braid Rubber, Wire-braid Rubber, Wire-braid Non-Conductive Dual-Line Non-Conductive Dual-Line Non-Conductive Dual-Line Non-Conductive
I.D. (in) 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 High Flow 3/8 High Flow 1/4 1/4 1/4 1/4
Wt. 1.08 1.18 1.76 2.04 2.17 3.35 2.35 2.55 3.00 3.34
3/8 NPTF 10 ft 3/8 NPTF 20 ft 3/8 NPTF 3/8 NPTF 3/8 NPTF 6 ft 6 ft 8 ft
3/8 NPTF 10 ft 3/8 NPTF 12 ft 3/8 NPTF 20 ft 3/8 NPTF 10 ft 3/8 NPTF 20 ft 3/8 NPTF 20 ft 3/8 NPTF 15 ft 3/8 NPTF 20 ft 3/8 NPTF 50 ft
Note: Polyurethane hoses are not recommended for use where heat or weld spatter conditions exist. Models with Couplers: Models 9764 and 9754 include 9798 half coupler & 9800 dust cap. TWH Models (Dual-Line Non-Conductive) include coupler halves for torque wrench applications.
421

Couplers Standard & Flush-Face

Standard Type Couplers: Designed for use up to 10,000 psi with hydraulic jacks, cylinders, etc. They are the threaded union type for interchanging cylinders in seconds. Each half is valved with a precision ball for a tight shutoff when disconnected. These couplers also permit the separation of cylinders or hose from pump when at 0 psi with minimal oil loss. Flush-Face Type Couplers: High flow, no-spill, push-to-connect couplers with locking collar and flush face designed for high pressure applications. The flush-face concept makes it easy to clean both coupler ends before connecting. The unique push-to-connect, dry-break design eliminates oil spillage. The locking collar makes accidental disconnects a thing of the past. For 10,000 psi operation. Designed to permit high oil flow.
Couplers Standard & Flush-Face

Catalog Part No. C1JN28 C1JN30 Power Team Model 9795 9798 9796 Type Standard Standard Standard Description Complete quick coupler set, male half has 3/8 NPT female pipe thread, female half has 3/8 NPT male pipe thread, includes 2ea 9800 dust caps Male coupler half, 3/8 NPT female pipe thread, with 9800 dust cap Female coupler half, 3/8 NPT male pipe thread, with 9800 dust cap Wt. 0.86 0.20 0.56 Price Each
Fluid Conveying
C1JN29
Pressure Gauges Analog

Features: Gauges feature an easily readable and highly visible, red day-glo needle High strength steel bourdon tube ensures high cycle life Stainless steel cases and lens locking rings Most dry gauges can be filled with silicone (Kit #9046) Have 1/4" NPT connections.
Pressure Gauges Analog

Catalog Part No. C1KK94 C1JM93 C1JM96 C1KK96 C1KK97 C1KK98 C1KK99 Power Team Model 9041 9040 9052 9055 9063 9065 9069 Face Pressure Diameter Range (in) (PSI) 2-1/2 2-1/2 4 4 4 4 4 0 - 10,000 0 - 10,000 0 - 10,000 0 - 10,000 0 - 10,000 0 - 10,000 0 - 10,000 Tons ---0 - 10 0 - 25 0 - 30 0 - 55 Major Graduations 2500 PSI 2500 PSI 1000 PSI 2000 PSI, 1 Ton 2000 PSI, 5 Ton 2000 PSI, 5 Ton 2000 PSI, 5 Ton Minor Graduations 500 PSI 500 PSI 200 PSI 200 PSI, 0.1 Ton 200 PSI, 0.5 Ton 200 PSI, 0.5 Ton 200 PSI, 0.5 Ton Silicone Filled No Yes Yes No* No* No* No* Use With Cylinder Series All All All C, RD, RH, RLS & RSS C & RD RH, RLS & RSS C, R, RA & RD Wt. 0.37 0.40 0.86 0.55 0.55 0.55 0.55 Price Each
422

Hydraulic Power & Control Pressure Gauges Analog
Catalog Part No. Power Team Model Face Pressure Diameter Range (in) (PSI) 4 4 0 - 10,000 Tons 0 - 60 Major Graduations 2000 PSI, 5 Ton 2000 PSI, 10 Ton Minor Graduations 200 PSI, 1 Ton 200 PSI, 1 Ton Silicone Filled No* No* No* Use With Cylinder Series RH C, R, RA, RD, RH. RLS, RSS &RT1004 R, RD & RH Wt. 0.55 0.55 Price Each
C1KN85 9071 C1KL11 9075
0 - 10,000 0 - 100
C1KV62 9079 4 0-10,000 0 - 200 2000 PSI, 20 Ton 200 PSI, 2 Ton Note: * indicates shipped dry. User can convert to wet using liquid silicone No. 9046.
Hydraulic Fluid Standard/Fire-Resistant/Biodegradable/Low Temp

Standard Type: For dependable performance of all your hydraulic pumps and cylinders Contains foam suppressant additives and has a high viscosity index. Flame-Out 220 Type: Contains anti-rust, anti-foam and anti-sludge additives Provides fire resistant protection Provides maximum lubrication and heat transfer Offers a wider operating temperature range No need to change seals in your Power Team equipment. Just drain the standard oil and replace it with Flame-Out 220. Biodegradable Type: Biodegradable, non-toxic fluid withstands moderate to severe operating conditions; provides excellent protection against rust Offers superior anti-wear properties, has excellent multimetal compatibility. Developed to meet stringent performance requirements and satisfy growing environmental needs for hydraulic fluids which are readily biodegradable and non-toxic. Can be used with all Power Team pumps, cylinders, valves and other accessories using standard seals. Depending on the contamination or degradation levels which might be present in used fluid, small amounts of this substance, if spilled, will not affect ground water or the environment. Acceptable methods of disposal include use as a fuel supplement. Since this fluid will not typically be hazardous waste, additional disposal options may be available, including land farming or processing through sewage treatment facilities, if necessary approvals are obtained from appropriate regulatory authorities. This fluid has been tested against EPA 560/6-82-003 and OECD 301 for biodegradability, and toxicity has been tested against EPA 560/6-82-002 and OECD 203: 1-12. Not recommended for operation in temperatures below 20F (-7C) or above 160F (71C). Recommended storage temperatures not below -10F (-23C) or above 170F (77C). Low Temperature Type: Provides smooth, reliable operation in the coldest climate conditions.
Hydraulic Fluid Standard/Fire-Resistant/Biodegradable/Low Temp

Catalog Part No. C1JN19 C1JN20 Power Team Model 9637 9638 Type Standard Standard Standard Specific Container Grade Gravity @ Color Flash Size (ASTM) 60 F (ASTM) Point 1 Quart 1 Gallon 2-1/2 Gallons 215 215 215 0.88 0.88 0.88 2.0 2.0 2.0 Fire Point Viscosity Pour SSU Viscosity Point 100F/210F Index -30F -30F -30F 215/48 215/48 215/48 100 100 100 Wt. 1.95 7.80 Price Each
C1KN87 9636
400F 430F 400F 430F 400F 430F
19.09
Note: Biodegradable oil will burn if heat source is extreme enough. It will not, however, propagate the flame and is self-extinguishing when there is no ignition source.
423

Manifolds - Remote & Pump Mounted
Manifolds - Remote & Pump Mounted

Catalog Part No. C1JS15 C1KL14 Power Team Model 9642 9691 Description Manifold with two needle valves for control of two cylinders. Has four 3/8" NPTF ports. "Y" manifold for connecting two hydraulic cylinders to a single line. Has three 3/8" NPTF ports. Wt. 8.20 0.88 Price Each
Fittings - 10,000 PSI

Power Team hydraulic fittings are intended for use with Power Team high pressure hydraulic products and are suitable for use at max. working pressures of 10,000 psi unless otherwise noted. CAUTION: On part numbers 9673, 9675, 9676 and 9677 the female swivel end of these adapters is a straight pipe thread (NPSM) with a 30 seat. All male pipe fittings that are used with these female swivel adapters must have an internal 30 seat in order to effect a proper seal. All Power Team male fittings are manufactured with a 30 seat except 9687 and 9688.
Fluid Conveying
Fittings - 10,000 PSI

Catalog Part No. C1JN21 Power Team Model 9670 Description Tee adapter. For installing gauge between pump and hose coupling. Has 1/4" and 3/8" NPTF female and 3/8" NPTF male ports. Double tee adapter. Permits use of more than one cylinder in series with one pump. Three 3/8" NPTF female ports. Swivel connector. 3/8" NPTF male, 3/8" NPSM female. 45 fitting. Used when mounting gauge at an angle on connection such as 9670. Male x female 1/4" NPTF ends. Connector. 1/4" NPTF femate and 3/8" NPTF male. Coupling. Both ends 3/8" NPTF female. Street elbow. Male x female 3/8" NPTF ends. Male connector. 111/16" long, 3/8" NPTF male ends. Male connector. 21/4" long, 3/8" NPTF male ends. Coupling. 1/4" NPTF female x 3/8" NPTF female. Connector. 1/4" NPTF female Male connector. 1-11/16" long, 1/4" NPTF male ends. Cross. 3/8" tube. 45 gauge fitting. 3/8" NPTF male and female, and 1/4" NPTF female at 45. Wt. 0.50 1.00 0.15 0.30 0.10 0.20 0.30 0.10 0.20 0.20 0.20 0.10 0.35 0.63 Price Each
C1KN88 9671 C1KV70 C1JS16 9675 9678
C1KN89 9679 C1JS17 C1JS18 C1JS19 C1JS20 C1JS21 C1KV71 C1KV72 C1KL15 9680 9681 9682 9683 9685 9690 9698 9699
C1KN90 9689
424

In-Line Valves - 10,000 PSI

9596 Load Lowering Valve: Application: Precision metering for controlled cylinder piston return. Operation: Permits free flow when extending cylinder, built-in pressure relief and PosiCheck locks and holds load in raised position until operator opens valve. May be pre-set to provide consistent metered return, or operator may select rate of return with each actuation. Has 3/8" NPTF ports. NOTE: Pressure relief valve setting is 12,000 psi. Operating pressure is 10,000 psi and max. flow rate is 5 gpm. 9575 Shut-Off Valve: Application: This needle valve permits fine metering of hydraulic oil. Operation: Can be used for controlling multiple single-acting cylinders. RV21278 Relief Valves: Application: Provide an economical means of protecting a hydraulic circuit against over pressurization. Factory pre-set. Maximum flow rate of 5 gpm. 1/8 NPTF male inlet. 9633 Pressure Regulator Valve: Application: Single- or double-acting cylinders. Permits adjusting operating pressures at various values below relief valve setting of pump. Operation: Regulator valve is easily adjusted to maintain pressures between 300 and 10,000 psi. Maintains a given pressure setting within 3% over repeated cycles. Flow range is 17 cu. In./minute to 6 gpm.
In-Line Valves - 10,000 PSI

Catalog Part No. C1JN16 C1JN15 C1KL13 C1KN18 C1KN19 C1JQ77 Power Team Model 9596 9575 9633 RV21278-15 RV21278-25 RV21278 Shut-Off Valve, 3/8" female NPTF ports. In-line pressure regulator valve with two 3/8" NPTF inlet ports, one 1/8" NPTF tank port and 3 foot drain line kit. Relief Valve. Pre-set at 1,500 to 1,700 psi. Non-adjustable. 1/8" male NPTF inlet. Relief Valve. Pre-set at 2,300 to 2,700 psi. Non-adjustable. 1/8" male NPTF inlet. Relief Valve. Pre-set at 10,100 to 10,700 psi. Non-adjustable. 1/8" male NPTF inlet. Description Load Lowering Valve, 3/8" male x female NPTF ports. Wt. 2.10 1.40 Price Each
2.11 0.20 0.20 0.20
CAUTION: RV21278 relief valves are mounted inside reservoir and exhaust oil directly back to reservoir below oil level.
Service Tools
Magnetic Pick-Up Tool: Has permanent magnetic head for retrieving parts from otherwise inaccessible places.
Service Tools
Catalog Part No. C1KK82 Power Team Model 7395 Pick-up tool with pocket clip. 6" long. Description Wt. 0.10 Price Each
425

Post Tension & Stressing Jacks 20-30 Ton

Features: Power Team Monostrand Stressing Jacks are the most durable in the industry Ideally suited for work on slab-on-grade where dirt, heat and high volume use take their toll Available in single- or double-acting models Standard single-acting units have a 10" stroke. Other stroke lengths are available. Dead-end seaters for production work and field work available. Service repair is simple; components are long lasting and easily replaced 3" detachable seater nose assembly easily replaced with optional 6" nose assembly The jack of choice for highrise and elevated work, thanks to fast return time and light weight All hydraulic fluid controls are interior designed; more efficient and safer operation during tensioning and retraction Standard double-acting units have an 8-1/2" stroke; others are available Specially designed Power Team Control Valves are available for post tensioning jacks.
Post Tension & Stressing Jacks 20-30 Ton

Catalog Part No. C1JS73 Power Team Model SJ2010DA Description Double-acting post tension jack with power seater, 0.50" strand Cylinder Oil Strand Capacity Stroke Recommended Capacity Diameter (tons) (in) Pumps (in) (in) 20 8-1/2 PE554PT, PE604PT 53.0 Seater Type Tons @ 10,000 PSI 26.4 Wt. 42.00 Price Each
Fluid Conveying
0.375-0.50 Power
Parts for Post Tension & Stressing Jacks

Catalog Part No. C1KJ65 C1KJ66 C1KJ76 C1KJ77 Part Number 252555 252556 300944 300997 Replacement Handle, SJ2010DA Repair Kit, SJ2010DA Repair Kit, SJ3010DA Description Gripper Set, 1/2 Inch Diameter, SJ2010DA Wt. 0.57 0.90 0.09 0.12 Price Each
426

Portable High Tonnage Jacks Modular Design

Portable and compact, ideal for locomotive/railcar, mining and heavy equipment maintenance. Features: Modular design - pump and cart separate from cylinder and base Three tonnage capacity options 55-ton, 100-ton and 150-ton Three collapsed height options - 26", 33" and 45" Two standard power options - air (PA55) and electric (PE55) Two control options - remote motor control and remote valve/motor control Accessory options 6-5/8" extension, load-holding rings Select the collapsed height to fit your most frequent application - add jacking modules to suit your needs Remote operation for maximum operator safety and control - choose motor only or motor and valve control in the hand Easy to maneuver - large tires and small footprint make it easy to scoot into the tightest quarters, then locate the exact lifting position Adjustable, heavy-duty handle - makes this jack easy to move, position under vehicles. Can also be used to transport jack on site with a forklift. Load-holding rings (optional) - provide full rated mechanical load-holding capability Cylinder extension (optional) - adds more versatility by extending your jacks reach Low-temperature oil (optional) - provides smooth, reliable operation in the coldest climate conditions Modular design - allows you to change lifting modules to suit your tonnage or height requirements. Use the pump module as a portable power station for your other double-acting cylinders (10,000 psi). Exclusive load-control system - provides positive, chatter-free control when lowering the load Shielded and sheltered hydraulic lines - for safer, longer, trouble-free service. Pump & Cart Modules: Pump and cart modules contain hydraulic pump, cart, remote control and all hoses and fittings required to connect to a jack module. Jack modules easily separate from the pump and cart module. Extra jack modules may be purchased for a wide variety of lifting applications. Jack Modules: Additional Jack Modules may be purchased for varying applications.
Portable High Tonnage Jacks Modular Design

Catalog Part No. C1JQ44 C1JS57 C1JS58 Power Team Model Description Dimensions (in) Wt. 150.00 180.00 813.00 Price Each
Electric Pump & Cart Module. 220VAC 50Hz. Remote controlled motor 53.25L x 23.38W x PME55S-50-220 & valve. 57.63H JM315 JM420 Jack Module. 150 tons, 18-1/8" stroke. 33" collapsed height. Jack Module. 200 tons, 13-1/8" stroke. 45" collapsed height. 14.63L x 11.00W x 33.00H 14.63L x 11.00W x 45.00H
427

Square Drive Torque Wrenches Predator TWSD Series

Features: Low Weight, High Strength Design Superior Torsional Strength Fast Operation Cycle Fine Tooth Pawl Floating Piston Design Internal Swivel Manifold Relief Rigid Steel Body Construction Compact Frame Size Push Button Reversal of Square Drive Corrosion Resistant Finish 360 Reaction Arm Push to Click Reaction Arms Multi-Axis High Flow Swivel Manifold Simple Design Consistent Torque Output Fully Enclosed Drive Mechanism Accurate Torque Output Marathon Lifetime Warranty. Maximum Operating Pressure: 10,000 PSI.
Square Drive Torque Wrenches Predator TWSD Series

Catalog Part No. C1KG51 C1KG52 Power Team Model TWSD3 TWSD6 Square Drive (in) 1 1-1/2 Maximum Torque (ft. lbs.) 3,070 6,020 L1 (in) 6.70 7.70 L2 (in) 7.70 9.30 L3 (in) 4.90 5.60 H1 (in) 6.90 8.10 R (in) 1.50 1.80 W1 (in) 1.80 2.00 W2 (in) 4.10 5.40 Wt. 12.62 20.45 Price Each
Fluid Conveying
Accessories for TWSD Series Torque Wrenches

Catalog Part No. C1KG41 C1KG42 Part Number TWH15 TWH20 TWH50 Description Dual-Line Hose Assembly, 15 feet, Non-Conductive, 1/4" ID, with Coupling Halves & Dust Caps/Plugs Dual-Line Hose Assembly, 20 feet, Non-Conductive, 1/4" ID, with Coupling Halves & Dust Caps/Plugs Dual-Line Hose Assembly, 50 feet, Non-Conductive, 1/4" ID, with Coupling Halves & Dust Caps/Plugs Wt. 8.00 9.50 17.00 Price Each
C1KG43
428

Low Clearance Torque Wrenches Predator TWLC Series

Features: Low Weight, High Strength Design Superior Torsional Strength Fast Operation Cycle Fine Tooth Pawl Floating Piston Design Auto-Connect Drive Piston Compact Frame Size Rigid Steel Body Construction Internal swivel manifold Relief Built-in Reaction Pad Small Nose Radius Tool Free Link Change Corrosion Resistant Finish Multi-Axis High Flow Swivel Manifold Simple Design Consistent Torque Output Marathon Lifetime Warranty. Note: Links are sold separately, tool is not shipped with a required Link. Maximum Operating Pressure: 10,000 PSI.
Low Clearance Torque Wrenches Predator TWLC Series

Catalog Part No. C1KG46 C1KG47 Power Team Model TWLC4 TWLC8 Hex Range (in) 1-1/2 - 3-1/8 2-3/8 - 3-7/8 Maximum Torque (ft. lbs.) 3,975 7,950 L1 (in) 8.80 H1 (in) 6.40 H2 (in) 5.10 6.20 R (in) W1 (in) W2 (in) 1.70 2.10 Wt. 5.55 8.74 Price Each
1-1/2 1-7/8 2.00 22-7/8 2.70
10.40 7.70
Fluid Conveying
Note: Links are sold separately, select required Link from table below.
Accessories for TWLC Series Torque Wrenches

Catalog Part No. C1KG41 C1KG42 C1KG43 Part Number TWH15 TWH20 TWH50 Description Dual-Line Hose Assembly, 15 feet, Non-Conductive, 1/4" ID, with Coupling Halves & Dust Caps/Plugs Dual-Line Hose Assembly, 20 feet, Non-Conductive, 1/4" ID, with Coupling Halves & Dust Caps/Plugs Dual-Line Hose Assembly, 50 feet, Non-Conductive, 1/4" ID, with Coupling Halves & Dust Caps/Plugs Wt. 8.00 9.50 Price Each
17.00
Single-Phase 2-Speed Torque Wrench Pumps PE55TWP Series (56in @ 10,000PSI)

Features: Two-speed high performance pump External adjustable pressure regulator Retract side internal relief valve protects tool Hand remote Use for double or single acting tools Four-tool manifold (-4 suffix models only) allows use of up to four tools simultaneously. CAUTION: This system should not be used for lifting applications. Maximum Pressure Output: 10,000 PSI.
429

Hydraulic Power & Control Single-Phase 2-Speed Torque Wrench Pumps PE55TWP Series (56in @ 10,000PSI)
Catalog Part No. C1JQ35 Power Team Model PE55TWP Reservoir Oil Delivery Oil Capacity (in per min) (in) 100psi/10,000psi Total/Usable 704 / 56 577 / 525 Price Each
Motor
Electrical Control Dimensions (in) 9.50L x 17.14W x 18.12H
Wt. 75.00
1-1/8HP 115VAC Remote control 60Hz, 25 amps with 20 foot cord
Note: Models with -110 or -220 suffix have CE approval for 50 Hz applications.
Hydraulic Punches & Punch Sets 20 & 30 Ton

Features: Punch smooth, precise holes in seconds; much faster than drilling Fully portable for construction, maintenance and service applications, or can be mounted on a workbench for production jobs. Has carrying handle for precise locating. Rugged, forged steel C frame for great strength and durability Dual action, spring loaded stripper holds material during punching operation, strips material from punch on return. Scribe lines on stripper aid in locating the punch (HP 35 only). Double Acting prevents binding and speeds retraction (HP20 only) The PE172 electric/hydraulic pump is an ideal power source. HP-35 Model: Punch only, includes metal case and die change tools. HP35SP Model: Punch set with pump. Includes HP35 punch, PE172 electric/hydraulic pump, 9756 hose, 9798 hose half coupler, 250459 punch/die set, metal case. NOTE: For 220 volt, 50 Hz. order with suffix -220. 250459 Punch/Die Set: Punch/die set for round holes. Includes one each: PD437 7/16" punch/die, PD562 9/16" punch/die, PD688 11/16" punch/die, PD812 13/16" punch/die. Maximum Operating Pressure: 10,000 PSI.
Fluid Conveying
Hydraulic Punches & Punch Sets 20 & 30 Ton Indexes & Technical Information
Catalog Part No. C1KM22 Maximum Material Power Team Capacity Thickness Model (tons) (in) HP35S 35 1/2 Oil Capacity Tool Dimensions (in) (in) 4.6 A=13.75 B=9 C=3.75 D=0.56 E=2.88 Price Each
Description Punch with punches and dies. Includes HP35 punch, metal case and 250459 punch/die set.
Wt. 44.00
Punches
Catalog Part No. C1KM89 Part Number PD688 Description Punch w/ Flat Die Set, Round, 11/16", for HP35 Wt. 0.46 Price Each
430

Wrenches & Pry Bars

Heavy Duty Adjustable Spanner : Extra heavy construction. Has one 3/4" thick, eleven-position hook-jaw for a capacity of 4-3/4" to 12-3/4" O.D. Drop-forged. Handle length: 25-3/4"; handle dia.: 15/16". Ratcheting Chain Wrenches: Special head design allows you to turn wrench in either direction. Ratcheting action makes it possible to re-grip without removal. For parts of most any size and shape. Pry Bars: Rolling head pry bars are an extremely popular and useful tool. Head may be used for almost any prying job since a great deal of leverage can be obtained. Long tapered body may be used as a lining-up drift. Jimmy Bars: Ideal for general lifting or prying. Heat treated chrome alloy steel to resist bending or breaking.
Wrenches & Pry Bars

Catalog Part No. C1KK75 C1KK76 C1KK77 C1KK78 C1KK79 C1KV42 C1KV43 C1JR91 C1JR92 Power Team Model 7163 7165 7166 7167 7168 7420 7421 7400 7401 Pry Bar, 7/16" round, 12" long. Pry Bar, 3/4" round, 18" long. Jimmy Bar, 3/4" round, 18" long. Jimmy Bar, 3/4" round, 24" long. Jimmy Bar, 7/8" round, 30" long. Jimmy Bar, 7/8" round, 46" long Jimmy Bar, 1" round, 54" long Chain wrench, cap. 1/2" to 4-3/4" O.D. (Capacity= 333 ft. lbs.) Chain wrench, cap. 3" to 6-3/4" O.D. (Capacity= 666 ft. lbs.) Description Wt. 0.60 2.20 1.40 2.50 4.30 7.50 11.30 2.15 5.00 Price Each
431

Mechanical Jaw Pullers 1-25 Ton

Pullers designed to pull gears, bearings and countless other press fitted parts. Features: Grip-O-Matic feature on all pullers. The harder the pull, the tighter the grip for removing gears, bearings and countless other press fitted parts. 2-way, 3-way and 2/3 way combination pullers make it easy to select a specific puller for a specific application Forged from high quality steel, heat treated and subjected to rigorous tests which exceed rated puller capacity. Choosing the right size puller: Compare the reach and spread of the pulling job with that of the pullers listed. The puller selected must have dimensions greater than those of the job.
Mechanical Jaw Pullers 1-25 Ton

Catalog Part No. C1KT98 C1JR37 C1JR40 C1JR43 C1JR45 C1KH82 C1KU13 C1KU14 Power Team Model 1022 1023 1027 1038 1041 1042 1046 1050 Capacity & Style 2 Ton, 2-Jaw, reversible jaws 2 Ton 2/3-Jaw, reversible jaws 5 Ton Long 2/3-Jaw, reversible jaws 7 Ton Long 2/3-Jaw 13 Ton 2/3-Jaw 13 Ton Long 2/3-Jaw 17-1/2 Ton Long 3-Jaw 25-Ton Long 3-Jaw Maximum Maximum Reach (in) Spread (in) 3-3/8 3-3/8 5-1/2 8-3/4 11 15-1/4 18-3/4 22-1/4 4 4-3/4 7 11 12 17 16 20 Screw Size (in) 3/8-24 x 4-7/8 3/8-24 x 4-7/8 Jaw Thickness Jaw Width (in) (in) Upper 3/16 Upper 1/4 Lower 1/8 Lower 1/2 Upper 3/16 Upper 1/4 Lower 1/8 Lower 1/2 Wt. 1.00 1.31 3.62 8.12 16.25 18.90 36.50 60.00 Price Each
Fluid Conveying
9/16-20 x 6-15/16 Upper 5/16 Upper 3/8 Lower 1/4 Lower 3/4 11/16-18 x 9 13-16 x 12 13-16 x 12 1-14 x 13-1/2 1-1/4-12 x 16-5/8 11/32 9/16 9/16 13/16 1-1/16 1 1 1 1-9/32 1-1/2
Mechanical Puller Accessories

Catalog Part No. C1KH90 C1KH91 Part Number 1123 1127 Description Bearing puller attachment, Max. Spread 4-5/8", Min. Spread 1/2", Use with Pullers 1035, 1036, 1037, 1038, and 927. Bearing puller attachment, Max. Spread 13-3/8", Min. Spread 3/4", Use with Pullers 1047, 1073, and 939. Wt. 5.42 Price Each
432

Mechanical Push Pullers 10, 17-1/2 & 30 Ton

For removing and installing gears, bearings, pulleys and other press-fitted parts. Federal Specification: GGG-P-00781-D. Features: Can apply a pushing or pulling force, depending on how the puller is set up Optional leg kits adapt your Push-Puller to extra long or extra short reach A wide variety of threaded adapters, bearing pulling attachments and internal pulling attachments can be used in combination with these Push-Pullers. Selection & Capacity Rating: Each Push-Pullers specified tonnage capacity is determined using its standard legs in tension. Using longer legs, or a setup in which the legs are in compression, will reduce the capacity. Always select the largest capacity puller and the shortest legs that will fit the job. Assembling the tool to apply pushing or pulling force: 1. Determine if you want the tools forcing screw to push or pull. 2. To exert pushing force, the forcing nut is installed beneath the cross block, as shown on left. 3. To cause the forcing screw to pull, the forcing nut is placed on top of the cross block. 4. The sliding plates must always be placed on the opposite side of the cross block from the forcing nut.
Mechanical Push Pullers 10, 17-1/2 & 30 Ton

Catalog Part No. Power Team Model Description 10 ton capacity, can be used with 1123 bearing pulling attachment, 679 pulley pulling attachment. May also be used with 1150, 1151, 1152, 1153 internal pulling attachments. 17-1/2 ton capacity, can be used with 1124 and 1130 bearing pulling attachments, 679 and 680 pulley pulling attachments. May also be used with 1150, 1151, 1153, 1165, 1166 internal pulling attachments. Maximum Maximum Reach Spread Screw Size (in) (in) (in) 2-1/8 7-1/4 Notes 1/2" of forcing screw tip end is threaded 5/8"-18. Model 1100 legs and 24827 leg ends included. Wt. Price Each
C1JM98
927
8-1/4
3/4"-16 x 12
7.00
C1JN12
938
11-1/8
3-1/8 11-3/4
1"-14 x 13-1/4
Leg ends threaded 5/8"-18. Model 1106 spread legs and 20.75 28427 leg ends included.
433

10 Ton Manual Puller Set Strong Box Model IPS10B

Here's a set of pullers that gives you almost unheard of versatility. This rugged, lock-able metal storage cabinet contains pullers, attachments and extra puller jaws good for a variety of applications. Cabinet may be mounted on a wall, stand, or workbench. Model IPS10B Set Contents: Model 927 10 ton capacity Push-Puller with 6-3/4" legs. Model 1027 5 ton combination 2/3 jaw puller. Model 1037 7 ton combination 2/3 jaw puller. Model 1101 15-3/4" puller legs (pair). Models 1122 & 1123 bearing pulling attachments. Model 1152 internal pulling attachment. Model 7393 gear & pulley puller. Male/Female Threaded Adapters, 2 of each: Models 8005, 8006, 8007, 8010, 8013, 8015, 8019. Female Threaded Adapters: Models 8035, 8037, 8038, 8039, 8040. Shaft Protectors: Models 8050 thru 8053. Step Plate Adapters: Models 8057 thru 8062. 3ea Model 43892 Long Jaws for 1037. 212867 Cabinet, tool board and adapter board.
10 Ton Manual Puller Set Strong Box Model IPS10B

Catalog Part No. C1JS52 Power Team Model IPS10B Description 10 ton capacity Strong Box manual puller set. Includes cabinet with tool board, adapter board and tool set. Wt. 98.00 Price Each
Fluid Conveying
10 Ton Manual Puller Set Model IPS10M

This lockable metal strong box contains both hydraulic and manual pullers, plus attachments. The rugged storage cabinet keeps the tools organized and secure from unauthorized borrowers. Model IPS10M Set Contents: Model PH103C 10 ton combination 2/3 jaw hydraulic puller. Model 1027 5 ton combination 2/3 jaw puller. Model 1042 13 ton combination 2/3 jaw puller. Model 1177 slide hammer puller. Model 44148 3 jaws for slide hammer puller (4-1/2"). Model 44195 3 jaws for slide hammer puller (3"). Model 36578 slotted cross head for slide hammer puller. Model 27315 seal hook for slide hammer puller. Model 1152 internal pulling attachment (1-1/2" to 6" spread). Model 24832 forcing screw for 1152. Model 215315 cabinet & tool board. Storing Boards (Sold Separately): DB10M (Board for storing IPS10M set). DB17M (Board for storing IPS17M set). 3/8" x 36"W x 48"H.
10 Ton Manual Puller Set Model IPS10M

Catalog Part No. C1JS53 Power Team Model IPS10M 10 ton capacity manual puller set Description Wt. 53.00 Price Each
434

Hydra Grip-O-Matic Pulling System 6, 8, 11 & 30 Ton

A self contained pulling system in a compact package. Features: You get the worlds most copied puller design; the harder the pulling force, the tighter the jaws grip for secure holding force Power Team pullers are tested for top performance and reliability at maximum capacity and jaw spread Removing a wide variety of gears, bearings, bushings, pulleys and other press-fitted parts becomes a routine task Easily metered release valve control knob Spring loaded live centering cone Bladder type oil reservoir Rapid adjustment Use with 2 or 3 jaws Supplied with a sturdy storage/carrying case Features Power Teams exclusive Marathon Limited Lifetime Warranty. Hydra Grip-O-Matic pulling system: These pullers are ideal for pulling a wide variety of press-fitted parts including bushings, bearings, wheels, gears and pulleys. Applications can be found in a wide variety of industries as well. Grip-O-Matic pullers have been rigorously tested for top performance and reliability. PH82K is a complete pulling system which includes a hydraulic power module, 2-way puller head, jaws, legs and bearing splitter attachment; all contained in a convenient carrying case.
Hydra Grip-O-Matic Pulling System 6, 8, 11 & 30 Ton

Catalog Part No. C1KM90 Power Team Model PH63C Cylinder Capacity (tons) 6 Reach (in) Studs -Reach (in) Jaws 6 Minimum Maximum Spread Reach Studs Jaws Stroke (in) (in) (in) (in) --7-7/8 3-1/8 Dimensions (in) A=0.56 B=0.25 C=0.88 D=3.25 E=0.88 A=0.44 B=0.38 C=1.00 D=3.25 E=1.13 A=0.56 B=0.38 C=1.13 D=3.25 E=1.13 Wt. 10.80 Price Each
C1JQ43
PH83C
--
7-1/2
--
--
9-13/16
3-1/8
14.50
C1JQ42
PH113C
15
--
--
--
11
3-1/8
17.60
435

17-1/2 Ton Hydraulic Puller Set Model IPS17H

This set includes a 3-jaw puller and a Push-Puller. Ideal for heavy duty applications; put this set to work wherever large gears, bearings, wheels, pulleys, etc. are found. Model IPS17H Set Contents: Model 3084350R9 wooden storage box. Model P55 single-stage hydraulic hand pump assembly. Model RT172 17-1/2 ton cylinder with threaded insert. Model 9898 hose half coupler. Model 9767 6 foot hydraulic hose. Model 9670 tee adapter. Model 9059 pressure gauge. Model 1062 17-1/2 ton capacity Push-Puller with 16-1/2" legs. Model 1066 17-1/2 ton 3-jaw hydraulic puller. Model 1154 bearing cup pulling attachment. Model 1130 bearing pulling attachment. Model 1105 22-1/2" legs (pair). Model 24818 speed crank. Model 28228 screw cap. Model 32118 adjusting screw. Model 201454 pushing adapter. Model 41224 2-jaw head for 1066. Model 8020 1"-8 female x 5/8"-18 male threaded adapter. Model 8038 5/8"-8 female x 3/4"-16 female threaded adapter.
17-1/2 Ton Hydraulic Puller Set Model IPS17H Fluid Conveying

Catalog Part No. C1JN98 Power Team Model IPS17H Description 171/2 ton capacity hydraulic puller set. Includes hydraulics, pullers, wooden storage box and accessories. Wt. 137.00 Price Each
CAUTION: All the items listed may not withstand the full tonnage specified. For Example: When an accessory with a 1 ton capacity is used with a 10 ton puller, the setup can be used only at a force of 1 ton.
30 Ton Hydraulic Puller Set Model IPS30H

Just what you need for those big jobs. Not only do you get a 30 ton hydraulic Push-Puller , you also get a 2-jaw and a 3-jaw hydraulic puller. Plus, many popular accessories and the hardware needed to tackle the big jobs right away. Model IPS30H Set Contents: Model 3084350R9 wooden storage box. Model P55 single-stage hydraulic hand pump assembly. Model RT302 30 ton cylinder with threaded insert. Model 9798 hose half coupler. Model 9767 6 foot hydraulic hose. Model 9670 tee adapter. Model 9059 pressure gauge. 2ea Model 8036 1"-14 female x 1"-14 female threaded adapters. Model 1166 bearing cup pulling attachment. Model 1127 bearing pulling attachment. Model 1074 30 ton 3-jaw hydraulic puller. Model 41226 2-way head for 1074. Model 1070 30 ton capacity hydraulic Push-Puller with 18" legs. Model 1111 28" legs for 1070. Model 27198 speed crank. Model 28229 screw cap. Model 34510 pushing adapter. Model 34758 adjusting screw.
30 Ton Hydraulic Puller Set Model IPS30H

Catalog Part No. C1JS56 Power Team Model IPS30H Description 30 ton capacity hydraulic maintenance puller set. Includes hydraulics, pullers, wooden storage box and accessories. Wt. 330.00 Price Each
436

CAUTION: All the items shown may not withstand the full tonnage specified. Example: When an accessory with a 1 ton capacity is used with a 7 ton puller, the setup can be used only at a force of 1 ton maximum.
17-1/2 & 30 Ton Manual & Hydraulic Puller Set Model IPS3017
These heavy-duty maintenance sets will more than pay for themselves, especially in saving you costly damage to parts. Lets you tackle hundreds of applications where pulling and pushing are required. Model IPS3017 Set Contents: Model 3084350R9 wooden storage box. Model P55 single-stage hydraulic hand pump. Model RT172 17-1/2 ton center-hole twin cylinder with threaded insert. Model RT302 30 ton center-hole twin cylinder with threaded insert. Model 9798 hose half coupler. Model 9767 6 foot hydraulic hose. Model 9670 tee adapter. Model 9059 pressure gauge. Model 1062 17-1/2 ton capacity hydraulic Push-Puller with 16-1/2" legs. Model 1070 30 ton capacity hydraulic Push-Puller with 18" legs. Model 1066 17-1/2 ton 3-jaw hydraulic puller. Model 1074 30 ton 3-jaw hydraulic puller. Model 41224 17-1/2 ton 2-jaw puller head. Model 41226 30 ton 2-jaw puller head. Combination 2/3 jaw pullers: Models 1027, 1037, 1041. Model 43892 long jaws (3 ea) for 1037. Model 30902 long jaws (3 ea) for 1041. Model 1105 22-1/2" legs for 1062. Model 1111 28" legs for 1070. Speed Cranks: Models 24814, 27198. Model 28229 screw cap. Model 28228 cylinder cap. Adjusting Screws: Models 32118, 34758. Pushing Adapters: Models 34510, 201923. Model 24832 special puller forcing screw. Step Plate Adapter Sets: Models 8075, 8076. Model 8056 shaft protector set. Pulley Pulling Attachments: Models 679, 680. Bearing Cup Pulling Attachments: Models 1154, 1166. Bearing Pulling Attachments: Models 1122, 1123, 1126, 1130. Threaded Adapters: Model 8005 5/8"-18 female x 3/8"-16 male (2ea), Model 8006 5/8"-18 female x 1/2"-20 male (2ea), Model 8007 5/8"-18 female x 1/2"-13 male (2ea), Model 8010 5/8"-18 female x 5/8"-11 male (2ea), Model 8012 1"-14 female x 5/8"-18 male (2ea), Model 8013 5/8"-18 female x 3/4"-16 male (2ea), Model 8015 5/8"-18 female x 3/4"-10 male (2ea), Model 8017 5/8"-18 female x 7/8"-14 male (2ea), Model 8018 5/8"-18 female x 7/8"-9 male (2ea), Model 8019 5/8"-18 female x 1"-14 male (2ea), Model 8020 1"-8 female x 5/8"-18 male (1ea), Model 8021 1"-8 female x 1"-14 male (1ea), Model 8025 1-1/4"-7 female x 5/8"-18 male (2ea), Model 8027 1-1/4"-7 female x 1"-14 male (2ea), Model 8036 1"-14 female x 1"-14 female (2ea), Model 8038 5/8"-18 female x 3/4"-16 female (2ea), Model 8044 female threaded adapter set.
17-1/2 & 30 Ton Manual & Hydraulic Puller Set Model IPS3017
Catalog Part No. C1JS55 Power Team Model IPS3017 Description 171/2 and 30 ton capacity manual and hydraulic puller set. Includes hydraulics, pullers, and accessories. Wt. 537.00 Price Each
CAUTION: All the items shown may not withstand the full tonnage specified. Example: When an accessory with a 1 ton capacity is used with a 7 ton puller, the setup can be used only at a force of 1 ton maximum.
Threaded Adapters
Catalog Part No. C1KK86 Part Number 8010 Description Threaded Adapter, 5/8"-18 F. x 5/8"-11 M. (2) Wt. 0.29 Price Each
437
Technical Information Pumps

Vickers Vane Pumps
Features and Benefits

Easy to Apply & Install - A large swept volume provides for greater pump displacement in a smaller envelope. Ports can be oriented relative to each other in 90 increments. Direction of rotation can be easily reversed. A broad selection of displacements is available for each series. A wide range of shafts are available. Long Life Expectancy - Diametrically opposed pumping chambers eliminate internal loading on bearings. Pumps are qualified at 110% of ratings, assuring long life when operated within rated conditions. Continuous High Performance - Vanes automatically compensate for any vane tip wear, providing like-new pump performance for the duration of its life. Pressure-loaded side plates maintain minimum side clearances for continuous volumetric efficiency, providing high pump performance indefinitely. Quiet Performance - Pumps have ten or twelve vanes, each providing two pumping events per revolution, resulting in exceptionally low pressure "ripple" in the hydraulic system. Low ripple means low vibration, and therefore low noise generation. Conforms to a Wide Variety of Applications - The pumps will accommodate almost any type of special hydraulic fluid that the application requires. A very low starting torque is required as the vanes are not extended until operating speed exceeds 500-600 rpm., which results in easier starting. Easy to Service - The pumps can be easily serviced with a cartridge kit, upgrading the pump to like-new condition, for a much lower cost than replacing the pump. Service can usually be performed without removing the pump from the application. High Performance - Low vane tip/ring loading allows high pressure operation. High speeds are possible because the inlet flow paths are designed to give uniform oil acceleration and thus better filling characteristics, particularly at low inlet pressures.
Fluid Conveying
Application Information
Fluids: Anti-wear hydraulic oil, automotive type crankcase oil (SE, SF, SG, SH), fire-resistant fluids (requires optional viton seals). Seals: Buna-N standard (petroleum oil, water-glycol, water-in-oil emulsion, polyolester, high water base fluids). Optional viton seals available for fire-resistant phosphate ester fluids. Shaft Rotation: Clockwise or counterclockwise (Viewed from shaft end). Can be changed by changing the assembly of internal parts. Minimum Speed: 600 RPM. Inlet Pressure: 0 to 5 psi (Recommended), 10 psi (Maximum), 5 in./Hg. (Minimum, with petroleum oil). Operating Temperature: 120 to 130F (Recommended), 150F (Max. recommended oil), 180F (Max. extreme condition oil), 120F (Max. water-containing fluids). Recommended Fluid Viscosity: 70-250 SUS (Running), 4000 SUS Max (Startup). Recommended Filtration: Per ISO Cleanliness Code, 20/18/15 (<2000 psi), 19/17/14 (2000-3000 psi).
438

Single Hydraulic Pumps Fixed Displacement Vickers V10 & V20 Series To 19.5 GPM @ 1800 RPM
Vickers V10 & V20 Vane Pump Specifications

Typical Delivery GPM @ MAx. RPM & PSI 3.6 7.3 9.4 10.9 12.8 14.6 16.0 16.1 16.7 17.7 19.8 22.9 23.0 25.9
Series V10
Ring Size GPM 1200 RPM 100 PSI 1 2 3 4 5 6 7 6 7 8 9 11 12 13
Displ. cu.in. per Rev. 0.20 0.40 0.60 0.80 1.00 1.19 1.39 1.19 1.39 1.62 1.81 2.22 2.38 2.59
Max. RPM 4800 4500 4000 3400 3200 3000 2800 3400 3000 2800 2800 2500 2400 2400
Max. PSI 2500 2500 2500 2500 2500 2200 2000 2500 2500 2500 2500 2500 2200 2200
Flow GPM 1800 RPM 100 PSI 1.5 3.0 4.5 6.0 7.5 9.0 10.5 9.0 10.5 12.0 13.5 16.5 18.0 19.5
Typical Input HP @ Max. RPM & PSI 7.0 13.6 17.8 20.4 22.8 24.5 24.0 29.0 29.5 32.5 35.5 37.5 36.0 39.0
V20
Fluid Conveying
Performance Constants: Based on using petroleum oil at 120 F, viscosity of 150SUS at 100 F, and pump inlet at 0 PSIG (14.7 PSIA). Note: Outlet pressure must always be higher than inlet pressure.
439

Single Hydraulic Pumps Fixed Displacement Vickers V10 & V20 Series To 19.5 GPM @ 1800 RPM
Vickers V10 & V20 Vane Pump Model Codes

1 1 F3
V
2
10
3 4
1
5 8 K
P
6
4
7
P
8
1
9
C
10 11 11
20
12 13
Special Seals Viton Omit if not required. Vane Pump
2 3
V 10 20
P Series
4 F P
Integral Valve Options Flow control & relief Priority valve & relief Omit if not required. Mounting 2-bolt SAE A flange Face-Type 2-bolt SAE B flange Inlet port connections 1-5/16-12 str. thd. (V20) 1 NPT (V10) 1-1/4 NPT (V20) 1-5/16-12 str. thd. (V10) 1-5/8-12 str. thd. (V20) 1-3/16-12 str. thd. (V10) SAE Rated Capacity - US GPM (1200 RPM & 100 PSI) 1 GPM (V10) 2 GPM (V10) 3 GPM (V10) 4 GPM (V10) 5 GPM (V10) 6 GPM (V10 & V20) 7 GPM (V10 & V20) 8 GPM (V20) 9 GPM (V20) 10 GPM (V20) 11 GPM (V20) 12 GPM (V20) 13 GPM (V20)
5 1 4 6 6 D P S T
Fluid Conveying
Outlet Port Connections V10P priority valve cover: 9/16-18 str. thd. primary outlet 3/4-16 str. thd. secondary outlet 9/16-18 str. thd. tank V10: 1/2 NPT V10 flow control cover: 3/4-16 str. thd. pressure 1/2 NPT tank V20: 3/4 NPT V20F flow control cover: 3/4-16 str. thd. pressure 1/2 NPT tank V10: 3/4-16 str. thd. V20: 1-1/16-12 str. thd. V20F flow control cover: 3/4-16 str. thd. pressure 1-1/16-12 str. thd. tank V10F flow control cover: 3/4-16 str. thd. pressure 3/4-16 str. thd. tank V20P priority valve cover: 3/4-16 str. thd. primary outlet 7/8-14 str. thd. secondary outlet 3/4-16 str. thd. tank Shafts 3/4 straight keyed Thd. with #6 woodruff key (V10) Thd. with #13 woodruff key (V20) 9T SAE A splined (V10) 11T splined (V20) 13T SAE B splined (V10) 13T splined (V20) 11T splined (Shorter Length) 9T SAE A splined (V20) __ Position of outlet or primary outlet (Viewed from cover end of pump) Opposite inlet 90 CCW from inlet In line with inlet 90 CW from inlet
Integral Valving Omit if not required Orifice Relief Valve 2 2 GPM A 250 PSI 3 3 GPM B 500 PSI 4 4 GPM C 750 PSI 5 5 GPM D 1000 PSI 6 6 GPM E 1250 PSI 7 7 GPM F 1500 PSI 8 8 GPM G 1750 PSI H 2000 PSI I 2250 PSI J 2500 PSI Design Subject to change. Installation dimensions remain the same for designs -20 through -29. Shaft Rotation Viewed from shaft end of pump Left hand (CCW) Omit for right hand
12
13 L
9 1 3 11 12 15 38 62 70 10
7 1 2 3 4 5 6 7 8 9 10 11 12 13
A B C D
440

Single Hydraulic Pumps Fixed Displacement Vickers V10 Series To 10.5 GPM @ 1800 RPM
Vickers V10 Vane Pump Dimensions

Ring Size 01 02 03 04 05 06 07 A (in) 4.55 4.55 4.55 4.80 4.80 5.00 5.00 B (in) 3.62 3.62 3.62 3.87 3.87 4.07 4.07
Number 11 Shaft (9 Tooth SAE A Splined)
441

Single Hydraulic Pumps Fixed Displacement Vickers V20 Series To 19.5 GPM @ 1800 RPM

Ring Size 06 07 08 09 11 12 13 A (in) 4.93 5.18 5.18 5.18 5.38 5.52 5.52 B (in) 4.02 4.27 4.27 4.27 4.47 4.61 4.61
Fluid Conveying
Number 11 Shaft (11 Tooth Extended Length Splined)
Number 38 Shaft (11 Tooth Shorter Length Splined)
Number 62 Shaft (9 Tooth SAE A Splined)
442

Double Hydraulic Pumps Fixed Displacement Vickers V2010 Series To 19.5 GPM/10.5 GPM @ 1800 RPM
Number 11 Shaft (13 Tooth SAE B Splined)
Ring Size Shaft End 7. 8 or 9 7. 8 or 9 7. 8 or 9 11 11 11 12 or 13 12 or 13 12 or 13
Ring Size Cover End 1. 2 or 3 4 or 5 6 or 7 1, 2 or 3 4 or 5 6 or 7 1, 2 or 3 4 or 5 6 or 7
A (in) 8.39 8.64 8.84 8.59 8.84 9.04 8.73 8.97 9.17
B (in) 7.45 7.70 7.90 7.65 7.90 8.10 7.79 8.03 8.23
C (in) 4.46 4.46 4.46 4.65 4.65 4,65 4.79 4.79 4.79
443

Single Hydraulic Pumps Fixed Displacement Vickers V Series To 90 GPM @ 1800 RPM (Low Noise 12 Vanes, 1800 RPM Capability)
Vickers V Series Vane Pump Specifications

Ring Size GPM 1200 RPM 100 PSI 2** 5** 8** 9** 11** 12** 14** 10** 12 14 17 21 25 30 35 38 42 45** 50 60 Flow GPM 1800 RPM 100 PSI 3.0 7.5 12.0 13.5 16.5 18.0 21.0 15.0 18.0 21.0 25.5 31.5 37.5 45.0 52.5 57.0 63.0 67.5 75.0 90.0 Typical Delivery GPM @ MAx. RPM & PSI 2.8 7.2 11.1 12.5 13.1 17.4 20.2 13.7 16.4 18.4 22.8 28.8 33.9 40.8 48.0 51.2 55.0 60.3 67.0 82.0 Typical Input HP @ Max. RPM & PSI 4.0 17.0 25.0 28.2 34.0 27.5 28.8 25.7 30.75 34.5 35.8 45.2 61.0 73.0 82.4 88.3 101.0 105.2 117.0 139.0
Series 20V**
Displ. cu.in. per Rev. 0.43 1.10 1.67 1.85 2.22 2.47 2.78 2.01 2.47 2.78 3.39 4.13 4.94 5.91 6.83 7.37 8.41 8.95 9.85 11.75
Max. RPM 1800 Min 1200 1800 Min 1200 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800
Max. PSI 2000 3000 3000 3000 3000 2300 2000 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500
25V
35V
Fluid Conveying
45V
Performance Constants: SAE 10W fluid @ 120 F and pump inlet @ 0 PSIG (14.7 PSIA). Note: Outlet pressure must always be higher than inlet pressure. **Non-stock, special order.
444

Vickers V Series Vane Pump Model Codes

1 1 F3 Special Seals Viton Omit if not required.
25V
2 3
17
4 5
A
5 6 7
1
8
C
9
22
10
R
11 9 A B C D
12 Inlet Positions (Viewed from cover end of pump) Opposite outlet 90 CCW from outlet In line with outlet 90 CW from outlet
A 6 M
SAE Port Connections SAE 4-bolt flange inlet & outlet Port Connection Modifier Metric port connection threads (25V, 35V, 45V) Omit for standard inch thread 4-bolt SAE flange Mounting Foot mounting Omit for standard flange mount
IntraVane Pump Series 20V (Non-stock, special order) 25V 35V 45V Optional Pilot SAE per ISO 3019/1 (25V, 35V, 45V) Metric per ISO 3019/2 100A2HW codes (25V, 35V, 45V) Omit for standard pilot Integral Valve Options Flow control & relief Priority valve & relief Omit if not required. SAE Rated Capacity - US GPM (1200 RPM & 100 PSI) 20V 0.43 cu.in. per rev. 20V 1.10 cu.in. per rev. 20V 1.67 cu.in. per rev. 20V 1.85 cu.in. per rev. 20V 2.22 cu.in. per rev. 20V 2.47 cu.in. per rev. 20V 2.78 cu.in. per rev. 25V 25V 25V 25V 25V 35V 35V 35V 35V 2.01 cu.in. per rev. 2.47 cu.in. per rev. 2.78 cu.in. per rev. 3.39 cu.in. per rev. 4.13 cu.in. per rev. 4.94 cu.in. per rev. 5.91 cu.in. per rev. 6.83 cu.in. per rev. 7.37 cu.in. per rev.
7 F
3 S M
4 F P
4 2 5 8 9 11 12 14 10 12 14 17 21 25 30 35 38
Shaft Types Standard Pilot Shafts: 1 7/8 St. Keyed (20V, 25V) 1-1/4 St. Keyed (35V, 45V) 11 13T SAE B Spline (25V) 14T SAE C Spline (35V, 45V) 86 1 St. Keyed (25V) 1-3/8 St. Keyed (35V) 1-1/2 St. Keyed (45V) 151 13T SAE B Spline (20V) S SAE Pilot & M Metric ISO Pilot Shafts 202 7/8 St. Keyed (25VS) 1-1/4 St. Keyed (35VS, 45VS) 203 1 St. Keyed (25VS) 1-3/8 St. Keyed (35VS) 292N Metric St. Keyed
10
Design Subject to change. Installation dimensions remain the same for designs -20 through -29. Shaft Rotation Viewed from shaft end of pump Left hand (CCW) Omit for right hand
Fluid Conveying
11 L
12
Special Suffix 167 2-bolt 5.00 dia. pilot (25V) Omit if no special suffix
42 45 50 60
45V 45V 45V 45V
8.41 cu.in. per rev. 8.95 cu.in. per rev. 9.85 cu.in. per rev. 11.75 cu.in. per rev.
445

Vickers V Series Vane Pump Dimensions
Fluid Conveying
Dimensions for Standard SAE Pilot and Standard Inch Thread Port Connection Models
A (in) 25V 35V 45V 1.41 1.69 2.43 B (in) 1.03 1.19 1.41 C (in) 1.00 1.25 1.50 D (in) 2.06 2.31 2.75 E (in) F (in) G (in) H (in) 4.62 5.50 6.25 J (in) 2.75 3.06 4.19 K (in) 1/2-13UNC-2B x 0.94 deep 1/2-13UNC-2B x 0.88 deep 5/8-11UNC-2B x 1.18 deep L (in) 4.76 4.94 6.03
0.50 3/8-16UNC-2B x 0.75 deep 1.50 0.63 7/16-14UNC-2B x 0.88 deep 2.00 0.63 1/2-13UNC-2B x 0.94 deep 3.00
M (in) 25V 35V
N (in)
P (in)
Q (in)
R (in)
S (in)
T (in)
RU (in) 0.55 0.63 0.63
V (in) 0.56 0.69 0.69
W (in) 6.88 8.38 8.38
X (in) 4.76 5.83 5.83
45V
4.00 1.50 3.99 0.38 6.38 2.50 3.00 5.75 1.50 5.00 0.38 7.28 2.75 3.25 7.13 4.99 5.00 1.69 0.50 8.50 3.25 3.69 7.13 4.99
446

Vickers V Series Vane Pump Dimensions

Straight Keyed Shafts
Shaft Pump Code 25V 1 86 35V 1 86 45V 1 86 A (in) B (in) C (in) D (in) 0.875 0.874 0.999 0.998 1.25 1.24 1.374 1.373 1.25 1.24 1.499 1.498 E (in) 0.966 0.961 1.11 1.10 1.39 1.38 1.52 1.51 1.39 1.38 1.67 1.66 F Key Width x Length (in) 0.817 x 1.25
Shaft 7/8 Straight Keyed 1 Straight Keyed 1-1/4 Straight Keyed 1-3/8 Straight Keyed 1-1/4 Straight Keyed 1-1/2 Straight Keyed
2.32 0.375 0.435 3.06 0.375 0.435 2.88 0.375 0.435 3.88 0.375 0.435 2.44 0.500 0.560 3.44 0.500 0.560
0.250 x 2.00 0.313 x 1.50 0.312 x 2.13 0.312 x 1.12 0.375 x 2.00
Splined Shafts Fluid Conveying

Shaft Pump Code 25V 35V 45V 11 11 11 Shaft 13 Tooth SAE B Splined 14 Tooth SAE C Splined 14 Tooth SAE C Splined A (in) 1.75 2.31 2.44 B (in) 0.375 0.375 0.500 C (in) 0.437 0.437 0.565 D (in) 0.156 0.25 0.38 E (in) 1.09 1.38 1.56
447

Single Hydraulic Pumps Fixed Displacement Vickers VQ Series To 90 GPM @ 1800 RPM (10 Vanes, High Speed / High Pressure Capability)
Vickers VQ Series Vane Pump Specifications

Ring Size GPM 1200 RPM 100 PSI 2** 5** 8** 9** 11** 12** 14** 12 14 17 19** 21 21** 25 30 35 38 42 45** 47** 57** 60** Flow GPM 1800 RPM 100 PSI 3.0 7.5 12.0 13.5 16.5 18.0 21.0 18.0 21.0 25.5 28.5 31.5 31.5 37.5 45.0 52.5 57.0 63.0 67.5 70.5 75.0 85.5 Typical Delivery GPM @ MAx. RPM & PSI 4.3 11.0 17.0 19.2 23.0 22.5 30.0 23.0 27.0 31.0 34.5 38.0 38.0 45.0 55.0 60.0 65.0 66.5 75.3 79.0 91.9 24.0 35.0 39.6 47.5 38.0 39.0 55.0 62.5 69.5 75.3 83.0 84.2 101.0 117.5 132.0 140.0 122.5 134.4 141.0 162.7 Typical Input HP @ Max. RPM & PSI
Series 20VQ**
Displ. cu.in. per Rev. 0.43 1.10 1.67 1.85 2.22 2.41 2.80 2.47 2.78 3.39 3.75 4.13 4.12 4.94 5.91 6.83 7.37 8.41 8.95 9.39 9.85 11.25
Max. RPM 2700 Min 1200 2700 Min 1200 2700 2700 2700 2700 2700 2700 2700 2500 2500 2500 2500 2500 2500 2400 2400 2200 2200 2200 2200
Max. PSI 2000 3000 3000 3000 3000 2300 2000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500
25VQ
35VQ
Fluid Conveying
45VQ
Performance Constants: SAE 10W fluid @ 120 F and pump inlet @ 0 PSIG (14.7 PSIA). Note: Outlet pressure must always be higher than inlet pressure. **Non-stock, special order.
448

Single Hydraulic Pumps Fixed Displacement Vickers VQ Series To 90 GPM @ 1800 RPM (10 Vanes, High Speed / High Pressure Capability)
Vickers VQ Series Vane Pump Model Codes

1 1 F3 Special Seals Viton Omit if not required.
25VQ
2 5 3
17
4
A
5 6
1
7
C
8
20
9 8 A B C D 10 Inlet Positions (Viewed from cover end of pump) Opposite outlet 90 CCW from outlet In line with outlet 90 CW from outlet
IntraVane Pump Series 25VQ 35VQ Standard bearing 45VQ 26VQ Heavy duty bearing 36VQ Optional Pilot 5 inch dia. pilot (25VQ only) Omit for standard pilot SAE Rated Capacity - US GPM (1200 RPM & 100 PSI) 25VQ 2.45 cu.in. per rev. 25VQ 2.77 cu.in. per rev. 25VQ 3.37 cu.in. per rev. 25QV 4.12 cu.in. per rev. 35VQ 35VQ 35VQ 35VQ 4.98 cu.in. per rev. 5.96 cu.in. per rev. 6.88 cu.in. per rev. 7.42 cu.in. per rev. 6
SAE Port Connections A SAE 4-bolt flange inlet & outlet AM Metric 4-bolt flange inlet & outlet (Same as code A except metric threads for fastening flanges) B Str. thd. inlet & outlet (25VQ) C SAE 4-bolt inlet (25VQ) Str. thd. outlet (25VQ) D Str. thd. inlet (25VQ) SAE 4-bolt outlet (25VQ) Mounting & Shaft Seal Assy Single Shaft Seal Pumps F Foot mounting with single shaft seal S Flange mount and double shaft seal Omit for flange mount with single shaft seal Shaft Types Single shaft Seal Pumps 1 Straight keyed 11 Splined 86 Straight keyed heavy duty 151 13T SAE B Spline (20V) Double Shaft Seal Pumps 123 Splined (25VQ, 35VQ) 130 Splined (45VQ)
3 C
4 12 14 17 21 25 30 35 38 42 50 60
Design Subject to change. Installation dimensions remain the same for designs -20 through -29. Shaft Rotation Viewed from shaft end of pump Left hand (CCW) Omit for right hand
Fluid Conveying
10 L
45VQ 8.46 cu.in. per rev. 45VQ 9.90 cu.in. per rev. 45VQ 11.80 cu.in. per rev.
449

Single Hydraulic Pumps Fixed Displacement Vickers 25VQ Series To 31.5 GPM @ 1800 RPM (10 Vanes, High Speed / High Pressure Capability)
Vickers 25VQ Series Vane Pump Dimensions
Fluid Conveying
Number 1 Shaft (7/8 Straight Keyed)
Number 86 Shaft (1 Straight Keyed)
450

Single Hydraulic Pumps Fixed Displacement Vickers 35VQ Series To 57 GPM @ 1800 RPM (10 Vanes, High Speed / High Pressure Capability)
Number 1 Shaft (1-1/4 Straight Keyed)
451

Single Hydraulic Pumps Fixed Displacement Vickers 45VQ Series To 90 GPM @ 1800 RPM (10 Vanes, High Speed / High Pressure Capability)
Fluid Conveying
452

Single Hydraulic Pumps Fixed Displacement Gear Pumps Haldex Barnes W900 Series To 13 GPM @ 1800 RPM
W900 Series Gear Pump Dimensions

SAE A 2-Bolt
3/4 Straight Keyed Shaft

Displacement X Max. in/rev 0.37 0.49 0.61 0.67 0.85 0.98 1.16 1.40 1.65 1.71 3.62 3.74 3.85 3.91 4.09 4.20 4.38 4.61 4.85 4.90 Y 1.732 1.791 1.850 1.866 1.969 2.02 2.114 2.228 2.346 2.370
Torque Limit PSI X Displ. <= 9,257
453

Single Hydraulic Pumps Fixed Displacement Gear Pumps Hydreco 1500K Series To 22 GPM @ 1800 RPM
Hydreco 1500K Series Gear Pump Dimensions

Example: 2-Bolt SAE A Front Flange with Both Side and Rear Ports
Size 1506 1510 1512 1515 1518
Dim A 4.38 4.75 5.00 5.25 5.50
Dim B 5.44 5.81 6.06 6.31 6.56
Fluid Conveying
Example: 4-Bolt Foot Mount with Rear Ports
Size 1506 1510 1512 1515 1518
Dim B 5.69 6.06 6.31 6.56 6.81
454

Single Hydraulic Pumps Fixed Displacement Gear Pumps Hydreco 1500K Series To 22 GPM @ 1800 RPM
Hydreco 1500K Series Shaft Dimensions & Side Load Chart

5/8 Straight Keyed Shaft (2.25 Long) 3/4 Straight Keyed Shaft (2.75 Long)
Torque Limit PSI X Displ. <= 5,250 5/8 Straight Keyed Shaft Threaded, with Woodruff Key
Maximum Allowable Side Loads, Outboard Bearing Models with Load Applied 1 From Mounting Face
Load Pounds
Speed RPM
455

Single Hydraulic Pumps Fixed Displacement Gear Pumps Hydreco 1500M Series To 19 GPM @ 1800 RPM
Hydreco 1500M Series Gear Pump Dimensions

Example: 2-Bolt SAE A Front Flange with Rear Ports
Size 1506 1510 1512 1515
Dim A (Approximate) 4.75 5.25 5.50 5.75
Fluid Conveying
Example: 4-Bolt Foot Mount with Side Ports
Size
Dim A 5.03 5.41 5.66 5.91
1506 1510 1512 1515
456

Single Hydraulic Pumps Fixed Displacement Gear Pumps Hydreco 1500M Series To 19 GPM @ 1800 RPM
Hydreco 1500M Series Shaft Dimensions & Side Load Chart

5/8 Straight Keyed Shaft 5/8 Straight Keyed Shaft, Threaded, with Woodruff Key
Fluid Conveying
Load Pounds
Speed RPM
457

Single Hydraulic Pumps Fixed Displacement Gear Pumps Eaton Series 26 To 24 GPM @ 1800 RPM
Eaton Series 26 Gear Pump Dimensions
Model
26001 26002 26003 26004 26005 26006 26007 26008 26009 26010 26011 26012 26013 0.40 2.86 3.67 0.50 2.93 3.74 0.58 2.99 3.80 0.66 3.05 3.86 0.84 3.18 3.99 1.02 3.30 4.11 1.20 3.43 4.24 1.37 3.56 4.37 1.48 3.65 4.46 1.54 3.68 4.49 1.69 3.81 4.62 1.77 3.88 4.69 1.87 3.93 4.74
Fluid Conveying
Displacement Dimension A Dimension B
Eaton Series 26 Gear Pump Shaft Dimensions

458

Single Hydraulic Pumps Fixed Displacement Gear Pumps Eaton Series L2 To 26 GPM @ 1800 RPM
Eaton Series L2 Gear Pump Dimensions
Model Displacement Dimension A Dimension B
25500 25501 25502 25503 25504 25505 25506 25507 25508 1.30 3.34 4.62 1.55 3.47 4.75 1.78 3.61 4.89 2.05 3.75 5.03 2.33 3.88 5.16 2.61 4.02 5.30 2.85 4.14 5.42 3.12 4.29 5.57 3.37 4.43 5.71
459

Single Hydraulic Pumps Fixed Displacement Gear Pumps Permco Box Pumps To 46 GPM @ 1800 RPM
Permco Box Pump Dimensions

PEK Model Shafts 7/8 Straight Keyed PEL Model Shafts 1 Straight Keyed
1 Straight Keyed
1-1/4 Straight Keyed
Fluid Conveying
SAE-A 9 Tooth
SAE-B 13 Tooth
SAE-B 13 Tooth Indexes & Technical Information
SAE-C 14 Tooth
460

Dump Pumps Permco DM400 Series To 21.5 GPM @ 1800 RPM Pump/Valve Assemblies For Light & Medium Duty Dump Trucks
Permco DM400 Series Dump Pump Dimensions

Remote Mount Models
461

Dump Pumps Permco DMD/DM640 Series To 46 GPM @ 1800 RPM Pump/Valve Assemblies For Medium & Heavy Duty Dump Trucks
Permco DMD/DM640 Series Dump Pump Dimensions

Direct Mount Models Remote Mount Models
Fluid Conveying
462

Single Hydraulic Pumps Variable Displacement Eaton Medium Duty Series To 42 GPM @ 2500 RPM
Eaton Medium Duty Series Piston Pump Dimensions

2.77 Cubic Inch Models
13T SAE B Splined Shaft Fluid Conveying Miscellaneous Products
4.21 Cubic Inch Models 14T SAE C Splined Shaft
463

Single Hydraulic Pumps Variable Displacement Eaton 420 Series Mobile Piston Pump
Eaton 420 Series Mobile Piston Pump Dimensions
Fluid Conveying
464

Single Hydraulic Pumps Variable Displacement Vickers PVB Series To 93 GPM @ 1800 RPM
Vickers PVB Series Piston Pump Dimensions

PVB Sizes 5 & 6 with SAE Flange Mount & Pressure Compensator Control
465

Single Hydraulic Pumps Variable Displacement Vickers PVB Series To 93 GPM @ 1800 RRM

Fluid Conveying
466

Single Hydraulic Pumps Variable Displacement Vickers PVB Series To 93 GPM @ 1800 RPM

467

Single Hydraulic Pumps Variable Displacement Vickers PVE Series To 21 GPM @ 1800 RPM
Vickers PVE Series Piston Pump Dimensions
Fluid Conveying
468

Single Hydraulic Pumps Variable Displacement Vickers PVH Series To 62 GPM @ 1800 RPM
Vickers PVH Series Piston Pump Dimensions

Basic Pump with Pressure Compensator and Load Sense Controls
A PVH57 PVH74 PVH98 PVH131 2.99 3.46 3.67 4.31 S
B 2.79 2.75 3.35 3.50 T
C 10.86 11.83 12.31 13.27 U
D 8.52 9.50 9.89 11.04 V
E 6.68 7.65 8.11 9.07
F 3.39 3.62 3.72 4.72 W 2.06 2.06 2.06 2.63
G 3.11 3.70 3.44 4.29 X 1.03 1.03 1.03 1.31
H 3.46 3.74 3.82 4.23 Y 1.03 1.03 1.03 1.25
I 2.71 3.19 3.15 3.34 Z 0.52 0.52 0.52 0.63
J 6.6 6.85 6.95 7.83
K 0.55 0.59 0.63 0.59
L 8.95 9.85 10.60 11.75
M 2.21 2.44 2.18 2.44
N 2.80 2.75 3.35 3.50
O 2.55 2.68 2.92 2.78
P 2.0 2.0 2.5 2.5
Q 3.06 3.06 3.50 3.50
R 1.53 1.53 1.75 1.75
All dimensions in inches
PVH57 1.69 0.84 1.0 PVH74 1.69 0.84 1.0 PVH98 2.0 1.0 1.0 PVH131 1.75 1.0 1.25
.375-16 .375-16 .375-16 .500-13
469

Single Hydraulic Pumps Variable Displacement Vickers PVH Series To 62 GPM @ 1800 RPM
Vickers PVH Series Piston Pump Shaft Dimensions

Straight Keyed Shafts
A (in) 1-1/4 SAE C 1-1/2 SAE CC 1-3/4 SAE D B (in) C (in) D (in) 2.20 2.44 2.95 E (in) 0.312 0.375 0.438
1.25 1.38 1.89 1.50 1.67 2.12 1.75 1.95 2.64
Splined Shafts
Number of Teeth 14 Tooth SAE C 17 Tooth SAE CC 13 Tooth SAE D 14 17 13 C (in) D (in)
1.89 2.20 2.13 2.44 2.64 2.95
Fluid Conveying
470

Single Hydraulic Pumps Variable Displacement Vickers PVQ Series To 30 GPM @ 1800 RPM
Vickers PVQ Series Piston Pump Dimensions

PVQ-10 with Rear Ports and 3/4 Inch Straight Keyed Shaft
471

Single Hydraulic Pumps Variable Displacement Vickers PVQ Series To 30 GPM @ 1800 RPM
Vickers PVQ Series Piston Pump Dimensions

PVQ-40 with Side Ports and 1 Inch Straight Keyed Shaft
Fluid Conveying
7/8 Inch Straight Keyed Shaft
472

Aro Non-Metallic Air-Operated Diaphragm Pumps

1/4 Inch Pump Dimensions
1/2 Inch Pumps Dimensions
1/4 Inch Pump Performance Curves
1/2 Inch Pump Performance Curves
Total Discharge Head
NPSH Required in Feet
Gallons per Minute Flow
473

Aro Metallic Air-Operated Diaphragm Pumps

1 Inch Pump Dimensions
Fluid Conveying
1-1/2 Inch Pumps Dimensions
1 Inch Pump Performance Curves Indexes & Technical Information
1-1/2 Inch Pump Performance Curves
474

Aro Metallic Air-Operated Diaphragm Pumps

2 Inch Pumps Dimensions
2 Inch Pump Performance Curves
475
Technical Information Hydraulic Motors

Char-Lynn H Series Dimensions
Fluid Conveying
Displacement (cu.in./rev) 2.2 2.8 3.6 4.5 5.9 7.3 8.9 9.7 11.3 14.1 17.9 22.6 45.1
Geroter Width (X) .25 .25 .40 .40 .52 .65 .79 .86 1.00 1.25 1.59 2.00 4.00
Length (Y) 5.20 5.20 5.35 5.35 5.47 5.60 5.74 5.81 5.95 6.20 6.54 6.95 8.95
476

Char-Lynn J Series Dimensions
5/8 Straight Keyed Shaft
Displacement (cu.in./rev) 0.50 0.79 1.21 1.93
X (in) 3.87 3.99 4.16 4.46
Y (in) 3.38 3.50 3.68 3.98
477

Char-Lynn S Series Dimensions
Fluid Conveying
Displacement (cu.in./rev) 3.6 4.5 5.9 7.3 8.9 9.7 11.3 14.1 17.9 22.6
Geroter Width (X) 0.40 0.40 0.52 0.65 0.79 0.86 1.00 1.25 1.59 2.00
Length (Y) 5.48 5.48 5.60 5.73 5.87 5.94 6.08 6.33 6.67 7.08
478

Char-Lynn H & S Series Shaft Dimensions & Torque Limits
1 in. Straight Keyed Shaft Torque Limit = 3,000 lb-in
SAE 6B Splined Shaft Torque Limit = 3,500 lb-in
479

Char-Lynn H & S Series Shaft Side Load Capacity

The hydrodynamic bearing has infinite life when shaft load ratings are not exceeded. Hence, the shaft side load capacity is more than adequate to handle most externally applied loads (such as belts, chains, etc.) providing the motor/shaft combination is applied within its torque rating. Allowable side load chart, shaft load location drawing and load curves (below) are based on the side/radial loads being applied to shaft at locations A, B and C. To determine the shaft side load capacity at locations other than those shown, use the formula:
900 1460 - - x ------------------Sideload Capacity P (lb) = -------N L + 3.79
for 200-900 RPM where N = RPM and L = Distance from mounting surface
Allowable Shaft Side Load (lb)

RPM 900 625 500 400 300 200 A 339 452 565 678 904 1582 B 300 400 500 600 800 1400 C 261 348 435 522 696 1216
Fluid Conveying
480

Char-Lynn H & S Series Case Pressure & Case Drain

Char-Lynn H &S Series motors are durable and have long life as long as the recommended case pressure is not exceeded. Allowable case pressure is highest at low shaft speeds. Consequently, motor life will be shortened if case pressure exceeds these ratings (acceptability may vary with application). Determine if an external case drain is required from the case pressure seal limitation chart below. If a case drain line is needed, connect drain line to assure that the motor will always remain full of fluid. A pressure restriction should be added to the case drain line to maintain 50 PSI case pressure. (A 50 PSI cracking pressure check valve may be used). PC = .6P + P2where PC = Case Pressure P1 = Inlet Line Pressure P2 = Back Pressure P = P1 - P2 Case Pressure Seal Limitation
481

Char-Lynn 2000 Series Standard Motor Dimensions
Fluid Conveying
7/16-20 SAE O-Ring Boss case drain port on side of rear housing
7/16-20 SAE O-Ring Boss case drain port on end of rear housing
2000 Series Standard Motor with 7/8-14 O-Ring Staggered Ports

Displacement (cu.in./rev) 4.9 6.2 8.0 9.6 11.9 14.9 18.7 24.0 29.8 (X) 5.40 5.58 5.83 5.83 6.10 6.45 6.90 7.53 8.21 (Y) 7.26 7.44 7.69 7.69 7.96 8.31 8.76 9.39 10.07
2000 Series Standard Motor with 1-1/16-12 O-Ring Staggered Ports 180 Apart
482

Char-Lynn 2000 Series Wheel Motor Dimensions
2000 Series Wheel Motor with 7/8-14 O-Ring Staggered Ports

2000 Series Wheel Motor with 1-1/16-12 O-Ring Staggered Ports 180 Apart
483

Char-Lynn 2000 Series Bearingless Motor Dimensions
Fluid Conveying
Note: Mating coupling banks are available. After machining, part must be hardened per Eaton specification. Contact us for details.
2000 Series Bearingless Motor with 7/8-14 O-Ring Staggered Ports

2000 Series Bearingless Motor with 1-1/16-12 O-Ring Staggered Ports 180 Apart
484

Char-Lynn 2000 Series Mounting & Shaft Dimensions
1-1/4 in. Straight Keyed Shaft Torque Limit = 6,800 lb-in
2 Bolt SAE A (Standard Motor)
Fluid Conveying
SAE C Splined 14T Shaft Torque Limit = 6,800 lb-in
4 Bolt (Wheel Motor)
1 in. Straight Keyed Shaft Torque Limit = 3,500 lb-in
1-1/4 in. Tapered Shaft Torque Limit = 6,800 lb-in
485

Char-Lynn 2000 Series Shaft Side Load Capacity

These curves indicate the radial load capacity on the motor shaft at various locations. The curve is based on B10 Bearing Life (2000 hours or 12,000,000 shaft revolutions at 100 RPM) at rated output torque. To determine radial load at speeds other than 100 RPM, multiply the load values given on the bearing curve by the factors in the table below.
RPM 50 100 200 300 400 500 600 700 800 Multiplication Factor 1.23 1.00 0.81 0.72 0.66 0.62 0.58 0.56 0.54
For 3,000,000 shaft revolutions or 500 hours, increase these shaft loads 52%.
Fluid Conveying
486

7/16-20 SAE O-Ring Boss
4000 Series Standard Motor with 1-1/16-12 O-Ring Ports

Displacement (cu.in./rev) 6.7 7.9 9.9 12.5 15.0 19.0 24.0 30.0 38.0
4000 Series Standard Motor with 3/4 inch Split Flange Ports
Displacement (cu.in./rev) 6.7 7.9 9.9 12.5 15.0 19.0 24.0 30.0 38.0
(X) 6.23 6.39 6.64 6.98 6.64 6.98 7.40 7.91 8.58
(Y) 8.44 8.60 8.85 9.18 8.85 9.18 9.60 10.11 10.78
(X) 6.57 6.73 6.79 7.31 6.97 7.31 7.73 8.24 8.91
(Y) 9.70 9.86 10.11 10.44 10.11 10.44 10.86 11.37 12.04
487

Char-Lynn 4000 Series Mounting & Shaft Dimensions
SAE C Splined 14T Shaft Torque Limit = 6,800 lb-in
Fluid Conveying
4 Bolt SAE B (Standard Motor)
1 -1/4 in. Straight Keyed Shaft Torque Limit = 6,800 lb-in
488


489

Fluid Conveying
7/16-20 SAE O-Ring Boss
6000 Series Standard Motor

Displacement (cu.in./rev) 11.9 15.0 19.0 23.9 30.0 38.0 60.0 (X) 7.38 7.60 7.89 8.23 8.67 9.25 10.81 (Y) 10.63 10.85 11.14 11.48 11.92 12.50 14.07
490

Char-Lynn 6000 Series Shaft Dimensions
SAE CC Splined Shaft Torque Limit = 11,750 lb-in
491


Fluid Conveying
492

Char-Lynn 10,000 Series Standard Motor Dimensions
10,000 Series Standard Motor Indexes & Technical Information

Displacement (cu.in./rev) 21.0 29.2 40.6 57.4 (X) 11.12 11.62 11.62 12.35 (Y) 14.99 15.50 15.50 16.23
493

Char-Lynn 10,000 Series Wheel Motor Dimensions
Fluid Conveying
10,000 Series Wheel Motor

Displacement (cu.in./rev) 21.0 29.2 40.6 57.4 (X) 6.57 7.07 7.07 7.79 (Y) 10.48 10.98 10.98 11.71
494

Char-Lynn 10,000 Series Shaft Dimensions
Fluid Conveying
2-1/8 in. 16 Tooth Splined Shaft Torque Limit = 24,000 lb-in
495

Char-Lynn 10,000 Series Shaft Side Load Capacity

Fluid Conveying
496

Cross 40 Series Gear Motors
Cross 40 Series Gear Motor Dimensions
5/8 Straight Keyed Shaft 1.25 Long
497

Hydreco 1500K Series Gear Motors
Hydreco 1500K Series Gear Motor Dimensions

Example: 2-Bolt SAE A Front Flange with Both Side and Rear Ports
Size 1506 1510 1512 1515 1518
Dim A 4.38 4.75 5.00 5.25 5.50
Dim B 5.44 5.81 6.06 6.31 6.56
Fluid Conveying
Example: 4-Bolt Foot Mount with Rear Ports
Size 1506 1510 1512 1515 1518
Dim B 5.69 6.06 6.31 6.56 6.81
498

Hydreco 1500K Series Gear Motors
Hydreco 1500K Series Shaft Dimensions & Side Load Chart

5/8 Straight Keyed Shaft (2.25 Long) 3/4 Straight Keyed Shaft (2.75 Long)
Torque Limit PSI X Displ. <= 5,250 5/8 Straight Keyed Shaft Threaded, with Woodruff Key
Load Pounds
Speed RPM
499

Hydreco 1500M Series Gear Motors
Hydreco 1500M Series Gear Motor Dimensions

Example: 2-Bolt SAE A Front Flange with Rear Ports
Size 1506 1510 1512 1515
Dim A (Approximate) 4.75 5.25 5.50 5.75
Fluid Conveying
Example: 4-Bolt Foot Mount with Side Ports
Size
Dim A 5.03 5.41 5.66 5.91
1506 1510 1512 1515
500

Hydreco 1500M Series Gear Motors
Hydreco 1500M Series Shaft Dimensions & Side Load Chart

5/8 Straight Keyed Shaft 5/8 Straight Keyed Shaft, Threaded, with Woodruff Key
Fluid Conveying
Load Pounds
Speed RPM
501

Eaton Medium Duty Piston Motor Dimensions
Fluid Conveying
13 Tooth SAE-B Splined Shaft Max Torque = 1852 inch pounds
7/8 Straight Keyed Shaft Max Torque = 1852 inch pounds
502

Permco Box Motors
Permco Box Motor Dimensions
PEK Model Shafts 7/8 Straight Keyed
PEL Model Shafts 1 Straight Keyed
1 Straight Keyed
1-1/4 Straight Keyed
Fluid Conveying
SAE-A 9 Tooth
SAE-B 13 Tooth Miscellaneous Products
SAE-B 13 Tooth
SAE-C 14 Tooth
503

Vickers 25M - 50M Vane Motors Up to 4625 lb-in Intermittent Torque Up to 4000 Intermittent RPM
Features and Benefits

High Efficiency - A unique dual pressure plate design results in low internal leakage and overall operating efficiency of about 86%. Efficiency varies with motor size, pressure, speed, and fluid viscosity and temperature. Mounting Flexibility - The motor's cover can be assembled in four positions with respect to the body. Changing port positions is accomplished by simply rotating the cover, and the cartridge which is pinned to the cover, in 90 increments, thus providing the optimum mounting for connecting piping. Reversibility - Through the dual plate design, the motors may be reversed simply by reversing the direction of oil flow. Series Operation - Inlet and outlet ports can be pressurized simultaneously without affecting service life or operating smoothness. These motors are suited to series applications. Easy to Service - The drive cartridge is accessible by removing the motor's cover and can be normally replaced in ten minutes without removing the motor from the machine. The torque capability of motors within the same model series can be changed by changing the cartridge or cam ring. Low-Wear Design - 25M-50M motors are hydraulically balanced to reduce wear and heat-producing friction. All internal inlet chambers are equally and diametrically opposed. As a result, pressure induced radial loads are balanced. Shaft bearings only have to carry external loads so wear is greatly reduced. Proven Reliability - For more than two decades, the reliability of the high performance motors has been field proven on a variety of machinery applications.
Fluid Conveying
Application Information
Fluids: Anti-wear hydraulic oil, automotive type crankcase oil (SE, SF, SG, SH). Note: Before starting the motor, fill its case with oil. The case must be kept full at all times to provide internal lubrication. Seals: Buna-N is standard. Shaft Rotation: Bi-Rotational. Minimum Speed: Normally 100 RPM. Lower speeds are permissible, depending upon torque requirements and characteristics of the driven load. Stall Torque: Motor stall torque ranges between 65% and 100% of 1200 RPM running torque for a given pressure differential across the motor. This is dependent on the specific angular position of the shaft at stall and the volume supply of fluid to the motor. Case Drain Connection: The case drain line must be full size, unrestricted, and connected from the drain port directly to the reservoir in such a manner that the housing remains filled with fluid. The line must be piped to prevent siphoning and must terminate below the reservoir fluid level. Case Drain Pressure: 0 PSI (Minimum), 10 PSI (Max. normal), 25 PSI (Max. pressure surge). Operating Temperature: 120 to 130F (Recommended), 150F (Max. Recommended), 180F (Max. extreme condition). Recommended Fluid Viscosity: 70-250 SUS (Running), 4000 SUS Max (Startup). Recommended Filtration: Per ISO Cleanliness Code, 20/18/15 (<2000 psi), 19/17/14 (2000-2500 psi).
504

Vickers 25M - 50M Series Vane Motor Specifications

Ring Size Torque Displ. per cu.in. 100 PSI per Rev. (lb-in) 25 30 35 42 55 65 35M 80 95 115 45M 130 155 185 50M 220 255 300 2.68 3.52 4.19 5.10 6.12 7.44 8.42 9.96 11.79 14.11 16.36 19.35 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 3600 RPM @ 500 PSI *2600 RPM @ 2250 PSI 2800 RPM @ 500 PSI *2200 RPM @ 2250 PSI 2800 RPM @ 500 PSI *2200 RPM @ 2250 PSI 2800 RPM @ 500 PSI *2200 RPM @ 2250 PSI *33 *43 *50 *64 *73 *90 *103 *120 *145 *144 *168 *196 *36 *48 *56 *70 *86 *102 *118 *136 *160 *161 *190 *230 85 64 40 Maximum Continuous RPM & PSI Typical Typical Required Output HP GPM @ Max. RPM @ Max. RPM Length (in) & Max. PSI & Max. PSI
Series 25M
Width (in)
Height (in)
Weight (lb)
Performance Constants: SAE 10W fluid @ 120 F.
505

Vickers 25M - 50M Series Vane Motor Model Codes

25
1 1 25 35 45 50 26 36 46 51 2 3 25M 35M 45M 50M M Series Standard Bearing 4 A
M
2
42
3
A
4
1
5
C
6
20
7 8 6 A B C D Cover Positions (Viewed from cover end of motor) Cover port opposite body port Cover port 90 CCW from body port Port connections in line Cover port 90 CW from body port
Mounting Flange & Port Connections SAE type 2-bolt mounting flange and SAE 4-bolt flange connections Shaft Types 1 Straight keyed 25M 7/8 Straight Keyed 35M 1-1/4 Straight Keyed 45M 1-1/4 Straight Keyed 50M 1-3/4 Straight Keyed Splined 25M 13 Tooth SAE-B 35M 14 Tooth SAE-C 45M 14 Tooth SAE-C 50M 13 Tooth SAE-D
Heavy duty bearing 5
Vane Motor Ring Size - Nominal Torque Rating (lb.in./100 PSI) 42, 55 or 65 80, 95 or 115 130, 155 or 185 220, 255 or 300
11
Fluid Conveying
Design Subject to change. Installation dimensions remain the same for designs -20 through -29. Special Features Suffix 114 50M only 124 50M only
506

Vickers 25M Vane Motors Up to 1625 lb-in Intermittent Torque Up to 4000 Intermittent RPM
Vickers 25M Series Vane Motor Dimensions
#1 Shaft (7/8 Straight Keyed)
507

Fluid Conveying
#1 Shaft (1-1/4 Straight Keyed)
508

509

Fluid Conveying
510

Vickers M2U Vane Motors Up to 700 lb-in Torque Up to 2800 RPM
Vickers M2U Vane Motor Dimensions
#11 Splined Shaft
#3 Threaded Shaft
511
Technical Information Hydrostatic Transmissions

Eaton Model 70142 Single Pump Dimensions
Fluid Conveying
512

513

Fluid Conveying
514

515

Eaton Heavy Duty Hydrostatic Transmissions
Eaton Series 1 Models 33, 39 and 46 Dimensions

Variable Pump
Fluid Conveying
Charge Pump Displacement (in/rev) 0.85 1.28 1.70 2.12
G (in) 3.63 3.88 4.13 4.38
Fixed Motor
516

Eaton Series 1 Models 54 and 64 Dimensions

Variable Pump
Charge Pump Displacement (in/rev) 0.85 1.28 1.70 2.12
G (in) 3.63 3.88 4.13 4.38
Fluid Conveying
Fixed Motor
517

Eaton Series 1 Model 76 Dimensions

Variable Pump
Fluid Conveying
Charge Pump Displacement (in/rev) 1.28 1.70 2.12
G (in) 3.88 4.13 4.38
Fixed Motor
518
Technical Information Hydraulic Cylinders

Tie Rod
Midway 1-1/2 Bore DA Series Cylinders

Dimensions
Bore 1.50
B 2.00
C 1.50
E 0.875
F 1.875
G 4.00
I 2.00
J 3/4-16
Monarch TL Series Cylinders

Dimensions
Fluid Conveying
Bore 2 2-1/2 3 4 5
B 2.125 2.125 2.125 2.125 2.125
C 2.0625 2.0625 2.0625 2.0625 2.25
E 2.75 3.125 3.75 5.125 6.00
G 1.125 1.125 1.125 1.125 1.1875
G1 1.125 1.125 1.125 1.125 1.3125
H 2.50 2.50 2.625 2.625 3.00
H1 2.375 2.50 2.5625 2.625 3.50
M 1-1/8-12 UNF 1-1/8-12 UNF 1-1/4-12 UNF 1-1/4-12 UNF 1-1/2-12 UNF
Monarch TX Series Cylinders
Bore 2 2-1/2 3
A 10.25 10.25 10.25
A ASAE 12.25 12.25 12.25
B 2.125 2.125 2.125
C 2.10 2.10 2.10
D 2.71 2.71 2.71
K 1.70 1.70 1.70
T 5/16 3/8 7/16
1.60 2.70 1.35 1.17 2.40 1.70 3.20 1.60 1.17 2.40 1.90 3.60 1.80 1.17 2.40
1.00 1-14UNS-3B 3/8 NPT 1.00 1-14UNS-3B 3/8 NPT 1.00 1-1/8-12UNS-3B 1/2 NPT
519

Georgia Hydraulics 2500 Series Dimensions

Typical Dimensions of Clevis Mounted 2500 Series Cylinders
Fluid Conveying
Bore 1-1/2 Rod A B C D E F G H J 3/4
2 1
2-1/2
3-1/2
5 1-1/2 1-3/4-2 2-1/2
6 Several
1-1-1/4 1-1/2 1-1-1/4 1-1/2 1-1-1/4 1-1/2 1-3/4-2 1-1-1/4 1-1/2 1-3/4-2 2-1/2
6-3/4 9-3/8 9-3/8 9-5/8 9-7/8 10-1/8 10-5/8 10-7/8 11-3/8 10-5/8 10-7/8 11-3/8 11-1/2 11-1/8 11-5/8 11-3/4 3-1/2 4-3/8 4-3/8 4-5/8 4-7/8 5-1/8 5-3/8 5-5/8 6-1/8 5-3/8 5-5/8 6-1/8 6-1/4 5-7/8 6-3/8 6-1/2 1-7/8 2-3/4 2-7/8 1-3/8 2-1/4 2-3/8 CALL 1/4 3/8 1/2 FOR DIMENSIONS 1-1/4 2 2-1/4 3/4 1-1/4 1-1/4 1/2 1 1 1-1/8 1-7/8 1-7/8
520

Georgia Hydraulics 3000 Series Dimensions

Typical Dimensions of Clevis Mounted 3000 Series Cylinders
Bore 1-1/2 Rod A B C D E F G H J Bore Rod A B C D E F G H J 2
2-1/2
3 1-3/4 1-1-1/4 1-1/2 1-3/4-2 1-1/4
3-1/2 1-1/2 1-3/4-2 2-1/2
4 1-1/2 1-3/4-2 2-1/2-3
3/4 1-1-1/4 1-1/2 1-1-1/4 1-1/2
7-1/4 10-1/8 10-3/8 10-1/8 10-3/8 10-7/8 10-3/8 4 5-1/8 5-3/8 5-1/8 5-3/8 5-7/8 5-3/8 1-7/8 2-3/4 2-3/4 1-3/8 2-1/4 2-1/4 1/4 3/8 3/8 1-1/4 2 2 3/4 1-1/4 1-1/4 1/2 1 1 1-1/8 1-7/8 1-7/8 5 2-1/2-3 3-1/2-4 2 13-7/8 14 14-1/2 16-1/8 7-1/8 7-1/4 7-3/4 8-7/8 4-1/2 3-3/4 3/4 3-1/4 1-3/4 1-1/2 2-1/4 6
10-5/8 11-1/8 11-1/8 11-3/8 11-7/8 12 11-5/8 12-1/8 12-1/4 5-5/8 6-1/8 5-7/8 6-1/8 6-5/8 6-3/4 6-3/8 7-7/8 7 2-3/4 2-7/8 2-7/8 2-1/4 2-3/8 2-3/8 1/2 1/2 1/2 2 2-1/4 2-1/4 1-1/4 1-1/4 1-1/4 1 1 1 1-7/8 1-7/8 1-7/8 8 3 3-1/2-4 20-1/4 20-3/4 9-3/4 10-1/4 7 6 3/4 5-1/2 3 2-1/2 3-1/2
2-1/2-3 3-1/2-4 2-1/2-3 3-1/2-4 16-1/4 16-3/4 18-1/2 19 9 9-1/2 9-1/2 10 4-3/4 6 4 5 3/4 3/4 4 4-1/2 2 2-1/2 1-3/4 2 2-1/2 3
521
Technical Information Hydraulic Steering

Char-Lynn Power Steering Series 3-6-12
Steering Control Units
Dimensions
Displacement C (cu.in./rev) (in) 4.5 5.9 7.3 8.9 9.7 11.3 14.1 17.9 22.6 28.2 35.9 45.1 0.40 0.52 0.65 0.79 0.86 1.00 1.25 1.59 2.00 2.50 3.18 4.00 D (in) 5.03 5.15 5.28 5.42 5.49 5.63 5.88 6.22 6.63 7.13 7.81 6.63
Steering Columns
Dimensions
Steering Wheel
Clearance
Fluid Conveying
Note: Dimension X is the Length of the steering column found in the stock table.
522
Technical Information Hydraulic Valves

Ball Valves
Apollo Ball Valve Pressure-Temperature Graphs

600# Bronze P-T Rating (Graph 4)
Pressure (PSIG)
Fluid Conveying
Temperature (F)
1000# SS P-T Rating (Graph 8) Miscellaneous Products
Pressure (PSIG)
Temperature (F)
523

Ball Valves

51500# CS P-T Rating (Graph 11)
Fluid Conveying
Pressure (PSIG)
Temperature (F)
2000# CS P-T Rating (Graph 13) Miscellaneous Products
Pressure (PSIG)
Temperature (F)
524

Ball Valves

2000# SS P-T Rating (Graph 14)
Pressure (PSIG)
Fluid Conveying
Temperature (F)
800# SS P-T Rating (Graph 21)
Pressure (PSIG)
Temperature (F)
525

Manually Operated 1-Spool Monoblock Valves Brand AO755 Series
Brand AO755 Series Dimensions
Fluid Conveying
Manually Operated 1-Spool Monoblock Valves Brand LS755 Series
Brand LS755 Series Dimensions
526

Manually Operated 1-Spool Monoblock Valves Brand SDCF Series
Brand SDCF Series Dimensions
527

Manually Operated 1-2-3 Spool Monoblock Valves Brand TS Series
Brand TS Series Dimensions
Fluid Conveying
528

1-2-3 Spool Monoblock Valves Eaton 30900 Series
Eaton 30900 Series Dimensions
529

Sectional Directional Control Valves for Open & Closed Center Circuits Husco Model 5000
Husco Model 5000 Dimensions
Fluid Conveying
530

Sectional Directional Control Valves for Open & Closed Center Circuits Husco Model 6000
Husco Model 6000 Dimensions
531

Solenoid Operated Subplate Mounted Valves Vickers DG4V-3 & DG4V-3S Series
Vickers DG4V-3 & DG4V-3S Installation Dimensions
Models with F Type coils (lead wires) and conduit box
Fluid Conveying
Models for use with ISO 4400 (DIN 43650) connectors
532

Vickers DG4V-3 & DG4V-3S Maximum Flow Rates

Performance based on standard full power solenoid coils warm and operating at 90% of rated voltage, with mineral oil at 168.6 SUS and a specific gravity of 0.87. DG4V-3S Models (Standard Performance) AC solenoid valves with dual frequency coils operating at 60 Hz DC solenoid valves
Pressure (psi)
Spool / Spring Code 0A 0C 2A 2B, 2C 6A 6B 8C
AC Curve 1 1 5 2 6 7
DC Curve 3 1 3 3 5 8
Consult us if application has flow rate approaching this curve and a pressurized volume exceeding 122 cu. in.
Fluid Conveying
Flow Rate (gpm)
Flow Rate (gpm)
DG4V-3 Models (High Performance) AC solenoid valves with dual frequency coils operating at 60 Hz DC solenoid valves
Pressure (psi)
Pressure (psi)
Spool Spring Code 0A 0C 2A 2B, 2C 6A 6B 8C
DC AC Curve Curve 2 3 1 2 2 3 1 1 5 4 6 5
Consult us if application has flow rate approaching this curve and a pressurized volume exceeding 122 cu. in.
Flow Rate (gpm)
Flow Rate (gpm)
533

Vickers DG4V-3 & DG4V-3S Pressure Drop Curves

Performance typical with mineral oil at 168.6 SUS and a specific gravity of 0.87. For other viscosities, pressure drops approximate to: Viscosity (SUS) 75.0 97.8 200 251 302 352 399
Pressure Drop (psi)
% of Table Valve 81% 88% 104% 111% 116% 120% 124%
A change to another specific gravity will yield an approximately proportional change in pressure drop.
Flow Rate (gpm)
Fluid Conveying
Pressure drops in offset positions except where otherwise indicated.

Spool Spool / Spring Positions Code Covered 0A Both 0C De-Energized 0C Energized 2A Both 2B, 2C Energized 6A 6B, 6C De-Energized 6B, 6C Energized 8C All B plugged A plugged P to A 5 -4 6 5 -6 9 P to B 5 -4 6 5 -6 9 A to T 2 -2 5 2 3 1 5 B to T 2 -2 5 2 3 1 5 P to T -4 -----3 B to A or A to B ---------
534

Solenoid Operated Subplate Mounted Valves Vickers DG4V-3 & DG4V-3S Series Soft Shift
Vickers DG4V-3 & DG4V-3S Soft Shift Dimensions P12L Models with Rectifier in Terminal Box
535

Solenoid Operated Subplate Mounted Valves Vickers DG4S-01 Series, -60 Design (Wet Armature)
Vickers DG4S-01 60 Series Installation Dimensions
Fluid Conveying
536

Solenoid Operated Subplate Mounted Valves Vickers DG4S-01 Soft-Shift Series, -60 Design
Vickers DG4S-01 60 Series Soft Shift Installation Dimensions
537

Solenoid Operated Subplate Mounted Valves Vickers DG4S-01 Series, -50 Design (Air-Gap)
Vickers DG4S-01 50 Series Installation Dimensions
Fluid Conveying
538

Solenoid Operated Subplate Mounted Valves Vickers DG4V4-01 10 Series
Vickers DG4V4-01 10 Series Installation Dimensions
539

Solenoid Operated Subplate Mounted Valves Vickers DG4V-5 20 Series
Vickers DG4V-5 20 Series Installation Dimensions

Models with AC Coils
Model DG4V-5-*A(L)/B(L)(-Z)-(V)M DG4V-5-*A(L)/B(L)-H2-(V)M
Fluid Conveying
DG4V-5-*A(L)/B(L)-P-(V)M DG4V-5-*C/N(-Z)-(V)M DG4V-5-*C/N-H-(V)M
Solenoid at: Port A end Port B end Port A end Port B end Port A end Port B end Both ends Both ends
C 4.84 -5.43 -4.84 -4.84 5.43
D -4.84 -5.43 -4.84 4.84 5.43
E -7.17 -8.78 -7.68 ---
F 7.17 8.78 -7.68 ----
G ------9.68 10.87
Models with DC Coils Miscellaneous Products Indexes & Technical Information
Model DG4V-5-*A(L)/B(L)-(-Z)-(V)M DG4V-5-*A(L)/B(L)-H2-(V)M DG4V-5-*A(L)/B(L)-P-(V)M DG4V-5-*C/N(-Z)-(V)M DG4V-5-*C/N-H-(V)M
Solenoid at: Port A end Port B end Port A end Port B end Port A end Port B end Both ends Both ends
C 6.14 -7.28 -6.14 -6.14 7.28
D -6.14 -7.28 -6.14 6.14 7.28
E -8.46 -10.63 -8.98 ---
F 8.46 10.63 -8.98 ----
G ------12.28 14.57
540

Solenoid Operated Subplate Mounted Valves Vickers DG5S-8 Series
Vickers DG5S-8 Installation Dimensions
541

Solenoid Operated Subplate Mounted Valves Vickers DG5V-8 Series
Vickers DG5V-8 Installation Dimensions
Fluid Conveying
542

Solenoid Operated Subplate Mounted Valves Vickers DG5V-10 Series
Vickers DG5V-10 Series Installation Dimensions
543

Sectional Directional Control Valves for Open & Closed Center Circuits Walvoil DPC130 Series Walvoil DPC130 Series Dimensional Data
Fluid Conveying
Standard Threads
Working Sections 1 2 3 4 5 6 7 8 9 10 E (in) 7.87 9.76 11.70 13.50 15.40 17.30 19.20 21.10 23.00 24.90 F (in) 7.24 9.13 11.00 12.90 14.80 16.70 18.60 20.50 22.40 24.30 Port Inlet P and Outlet T A and B Ports UN-UNF (ISO 11926-1) 1-1/16-12 (SAE-12) 7/8-14 (SAE-10)
Pilot Ports (LS, M) Pilot Ports (L, V1, V2)
9/16-18 (SAE-6) 9/16-18 (SAE-6)
544

Sectional Directional Control Valves for Open & Closed Center Circuits Walvoil SD4 Series Walvoil SD4 Series Dimensional Data
Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
Standard Threads
Port Inlet P A and B Ports Outlet T UN-UNF (ISO 11926-1) 3/4-16 (SAE-8) 9/16-18 (SAE-6) 3/4-16 (SAE-8)
545

Fluid Conveying
Standard Threads
Working Spools 1 2 3 4 5 6 7 E (in) 3.96 5.41 6.87 8.33 9.78 11.24 12.70 F (in) 2.87 4.33 5.79 7.24 8.70 10.16 11.61 Port Inlet P A and B Ports Outlet T and Power Beyond C Pilot Ports (Hydraulic) Pilot Ports (Pneumatic) UN-UNF (ISO 11926-1) 3/4-16 (SAE-8) 9/16-18 (SAE-6) 3/4-16 (SAE-8) 9/16-18 (SAE-6) 1/8-27 NPTF
546

Sectional Directional Control Valves for Open & Closed Center Circuits Walvoil SD6 Series Walvoil SD6 Series Dimensional Data (Parallel and Tandem Circuit)
Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Standard Threads
Working Sections 1 2 3 4 5 6 7 8 9 10 11 12 E (in) 4.66 6.16 7.66 9.15 10.65 12.15 13.65 15.15 16.65 18.15 19.65 21.15 F (in) 2.28 3.78 5.28 6.77 8.27 9.76 11.26 12.76 14.26 15.76 17.26 18.76 Port Inlet P A and B Ports Outlet T and Power Beyond C Pilot Ports (Hydraulic) Pilot Ports (Pneumatic) UN-UNF (ISO 11926-1) 3/4-16 (SAE-8) 9/16-18 (SAE-6) 3/4-16 (SAE-8) 9/16-18 (SAE-6) 1/8-27 NPTF
547

Fluid Conveying
Standard Threads
Working Sections 1 2 3 4 5 6 7 8 9 10 11 12 E (in) 5.04 6.65 8.27 9.88 11.5 13.11 14.72 16.33 17.94 19.55 21.16 22.77 F (in) 3.23 4.84 6.46 8.07 9.69 11.3 12.91 14.52 16.13 17.74 19.35 20.96 Port Inlet P A and B Ports Outlet T and Power Beyond C Pilot Ports (Hydraulic) Pilot Ports (Pneumatic) UN-UNF (ISO 11926-1) 7/8-14 (SAE-10) 3/4-16 (SAE-8) 7/8-14 (SAE-10) 9/16-18 (SAE-6) 1/8-27 NPTF
548

Sectional Directional Control Valves for Open & Closed Center Circuits Walvoil SD11 Series Walvoil SD11 Series Dimensional Data (Parallel Circuit)
Standard Threads
Working Sections 1 2 3 4 5 6 E (in) 5.12 6.87 8.64 10.41 12.19 13.96 F (in) 3.94 5.71 7.48 9.25 11.02 12.79 Port Inlet P and Power Beyond C A and B Ports Outlet T Pilot Ports (Hydraulic) Pilot Ports (Pneumatic) UN-UNF (ISO 11926-1) 7/8-14 (SAE-10) 3/4-16 (SAE-8) 7/8-14 (SAE-10) 9/16-18 (SAE-6) 1/8-27 NPTF
549

Sectional Directional Control Valves for Open & Closed Center Circuits Walvoil SD16 Series Walvoil SD16 Series Dimensional Data (Parallel and Tandem Circuit)
Fluid Conveying
Standard Threads
Working Sections 1 2 3 4 5 6 7 8 9 10 11 12 E (in) 6.63 8.82 10.71 12.60 14.49 16.38 18.27 20.16 22.05 23.94 25.83 27.72 F (in) 4.88 6.77 8.66 10.55 12.44 14.33 16.22 18.11 20.00 21.89 23.78 25.67 Port Inlet P A and B Ports Outlet T and Power Beyond C Pilot Ports (Hydraulic) Pilot Ports (Pneumatic) UN-UNF (ISO 11926-1) 1-5/16-12 (SAE-16) 1-1/16-12 (SAE-12) 1-5/16-12 (SAE-16) 9/16-18 (SAE-6) 1/8-27 NPTF
550

Sectional Directional Control Valves for Open & Closed Center Circuits Walvoil SD25 Series Walvoil SD25 Series Dimensional Data (Parallel Circuit)
Standard Threads
Working Sections 1 2 3 4 5 6 7 8 9 10 11 12 E (in) 9.25 11.69 14.13 16.57 19.02 21.46 23.90 26.34 28.78 31.22 33.66 36.10 F (in) 6.38 8.82 11.26 13.70 16.14 18.58 21.02 23.46 25.90 28.34 30.78 33.22 Port Inlet P A and B Ports Outlet T and Power Beyond C Pilot Ports (Hydraulic) Pilot Ports (Pneumatic) UN-UNF (ISO 11926-1) 1-5/8-12 (SAE-20) 1-5/16-12 (SAE-16) 1-5/8-12 (SAE-20) 9/16-18 (SAE-6) 1/8-27 NPTF
551

Sectional Directional Control Valves for Open & Closed Center Circuits Walvoil SDS150 Series Walvoil SDS150 Series Dimensional Data
Fluid Conveying
Standard Threads
Working Sections 1 2 3 4 5 6 7 8 9 10 11 12 E (in) 6.06 7.83 9.61 11.40 13.20 14.90 16.70 18.50 20.20 22.00 23.80 25.60 F (in) 2.80 4.57 6.34 8.11 9.88 11.70 13.40 15.20 17.00 18.70 20.50 22.30 Port Inlet P and Power Beyond C A and B Ports Outlet T Pilot Ports (Hydraulic) Pilot Ports (Pneumatic) UN-UNF (ISO 11926-1) 1-1/16-12 (SAE-12) 7/8-14 (SAE-10) 1-1/16-12 (SAE-12) 9/16-18 (SAE-6) 1/8-27 NPTF
552

Relief Valves Guided Piston Type
Fulflo V-Series Performance Charts

All valve tests 110F to 120F, Oil Viscosity 150 SSU at 100F
553

NFPA-D03 Stack Valves Vickers SystemStak Valves
Vickers DGMC-3 Series Relief Valve Dimensions
Fluid Conveying
Model
A -----9.2
B --6.3 -6.3 --
C 6.1 ------
D -6.2 -6.2 ---
DGMC-3-AT-*W-40 DGMC-3-BT-*W-40 DGMC-3-BT-*W-40 DGMC-3-PT-*W-40 DGMC-3-PT-*W-*-40 DGMC2-3-AT-*W-BT-*W-40
554

Vickers DGMX2-3 Series Pressure Reducing Valve Dimensions
555

Vickers DGMDC-3 Series Check Valve Dimensions
Fluid Conveying
Model DGMDC-3-X-A*-40 DGMDC-3-X-B*-40 DGMDC-3-Y-P*-40 DGMDC-3-X-T*-40 DGMDC-3-Y-A*-40 DGMDC-3-Y-B*-40 DGMDC-3-Y-A*-B*-40
H 0.66 0.66 0.66 0.92 0.92 0.92 0.92
556

Vickers DGMPC-3 Series Pilot Operated Check Valve Dimensions
557

Vickers DGMFN-3 Series Flow Control Valve Dimensions
Fluid Conveying
Model DGMFN-3-X-A*W-40 DGMFN-3-X-A*W-B*W-40 DGMFN-3-X-B*W-40 DGMFN-3-Y-A*W-40 DGMFN-3-Y-A*W-B*W-40 DGMFN-3-Y-B*W-40 DGMFN-3-Z-P*W-40 DGMFN-3-Z-T*W-40
A 4.76 --4.76 -----
B --4.80 --4.80 ---
C -6.60 --6.60 ----
D ------4.80 4.80
E 0.70 0.70 0.70 0.90 0.90 0.90 0.70 0.90
558

Vickers DGMFN-5-Y Series Flow Control Valve Dimensions
559

Vickers DGMC-5-PT Series Relief Valve Dimensions
Fluid Conveying
560

Vickers DGMDC-5 Series Check Valve Dimensions
561

NFPA-D08 Stack Valves
Vickers DGC-06 Stacking Relief Valve Dimensions
Fluid Conveying
562
Technical Information Hydraulic Filters

Filter Sizing Basics

A filter sized too small for an application will require more frequent element changes, resulting in a high operating cost. The initial cost savings on the smaller filter assembly will be quickly erased by the cost of frequent element changes. A filter sized too big will give long element life, but will have a high initial cost and might be physically difficult to fit in the space available. A good rule of thumb: For satisfactory element life, the clean element pressure drop should generally be less than or equal to 40 percent of the indicators rated differential pressure. This means the clean element will have 60 percent (or more) of its capacity devoted to removing particulates.
Using the Pressure Drop Curves

The filter manufacturers pressure drop curves are based on using a fluid with a certain specific gravity and operating at a certain fluid viscosity. The pressure drops taken from these curves will need to be adjusted for the actual application conditions. Adjusting for actual specific gravity will usually not be necessary, unless a high water based fluid is being used. Adjusting for actual viscosity will almost always be necessary, since actual viscosity will vary greatly with the viscosity grade of the fluid being used and the operating temperature of the application.
Calculating the Actual Clean Pressure Drop

Total Clean Pressure Drop (P) through a filter assembly should be calculated as follows: Assembly P = Housing P+ Element P. Housing P from curve is corrected with the equation: Housing P = Curve P x Actual Specific Gravity of fluid / Referenced Specific Gravity. Element P from curve is corrected with the equation: Element P = Curve P x (Actual Fluid Viscosity (SSU) / Referenced SSU) x (Actual Fluid Specific Gravity / Referenced Specific Gravity). Remember: The above rule of thumb involves the Element P, not the Total P.
563

Suction / Return Filters
Stauff SAF07/11 Series Dimensions
Fluid Conveying
564

Stauff SAF07/10/11/13 Series Pressure Drop Curves
Average pressure drop with oil viscosity of 150 SSU @ 100 F.
565

Stauff SSF24/25 Series Dimensions
Fluid Conveying
566

Stauff SSF-120/160 Series Dimensions
567

Stauff SSF/SMF/SDF/SF Series Pressure Drop Curves
Fluid Conveying
568

Return Filters
Stauff RTF40 Series Dimensions
Bowl Length S1 S2
d2 h1 h2 h3 h4 h5 h6 b1 b2 b3 b4 b5 b6 d1 NPT/SAE d3 d4 G 2.09 4.80 10.35 15.16 0.83 0.43 5.98 5.98 2.75 1.40 4.41 4.41 4.80 1/2-13 UN 2B 1.50 0.43 1-1/2 NPT 2.09 4.80 18.70 23.50 1.50 0.43 5.98 5.98 2.75 1.40 4.41 4.41 4.80 1/2-13 UN 2B 1.50 0.43 1-1/2 NPT
569

Return Filters
Stauff RTF40 Series Pressure Drop Curves

Flow versus Pressure Drop
141 SUS oil with specific gravity of v 0.85
Fluid Conveying
570

Pressure Filters
Stauff SF014-SF160 Series Dimensions
* Recommended space for element change

Thread Connection G Filter SAE O- SAE Size NPT Ring Flange b1 SF014 3/4 1-1/16-12 SF030 3/4 1-1/16-12 3/4 3/4
b2
b3
b4
b5
d1
d2
h1
h2
h3
h4
h5
G4 3/8-16 UNC 3/8-16 UNC 1/2-13 UNC 1/2-13 UNC 5/8-11 UNC 5/8-11 UNC
4.10 0.94 2.00 0.94 2.00 2.68 3.58 7.40 3.07 1.89 0.49 3.35 4.10 0.94 2.00 0.94 2.00 2.68 3.58 10.00 5.67 1.89 0.49 3.35
SF045 1-1/4 1-5/8-12 1-1/4 5.04 1.24 2.63 1.24 2.63 3.74 4.57 9.41 4.06 1.95 0.49 4.72 SF070 1-1/4 1-5/8-12 1-1/4 5.04 1.24 2.63 1.24 2.63 3.74 4.57 11.73 6.34 1.95 0.49 4.72 SF090 1-1/2 1-7/8-12 1-1/2 7.01 1.45 3.13 1.45 3.13 5.12 6.26 12.72 5.83 2.84 0.49 5.91 SF160 1-1/2 1-7/8-12 1-1/2 7.01 1.45 3.13 1.45 3.13 5.12 6.26 19.45 12.56 2.84 0.49 5.91
571

Pressure Filters
Stauff SF014-SF300 Series Pressure Drop Curves
Fluid Conveying
572

Return Filters
Vickers HF4RT Series Dimensions & Pressure Drop Curves

Dimensions Flow versus Pressure Drop
Filter Housing Pressure Drop (PSID)
Flow Rate (GPM)
Element K Factor - PSI/GPM Element Type C-Pak C-Pak C-Pak Element Length 9 inch 18 inch 27 inch 03 Micron 0.168 0.080 0.051 05 Micron 0.140 0.066 0.043 10 Micron 0.078 0.037 0.024 20 Micron 0.044 0.021 0.013
Assembly Pressure Drop = Housing Pressure Drop+ Element Pressure Drop Housing Pressure Drop = PSID from curve above x (Actual specific gravity / Reference specific gravity) Element Pressure Drop = PSID from curve above x (Actual SSU/Reference SSU) x (Actual specific gravity / Reference specific gravity) Note: Reference Specific Gravity = 0.9 Reference SSU = 150
Conversion Formulas Liters per minute x 0.2642 = Gallons per minute
Bar x 14.5 = PSI
573

Return Filters
Vickers HS22 Series Dimensions & Pressure Drop Curves

Dimensions

Flow Rate (GPM) Filter Element (7 Inch R-pak) Pressure Drop (PSID)
Fluid Conveying
Flow Rate (GPM) Miscellaneous Products Filter Element (11 Inch W-pak) H2O Pro Water Removing Element Pressure Drop (PSID) Pressure Drop (PSID) Filter Element (11 Inch R-pak)
Flow Rate (GPM)
Flow Rate (GPM)
Conversion Formulas Liters per minute x 0.2642 = Gallons per minute
Bar x 14.5 = PSI
574

Return Filters
Vickers OFR-60 & OFR-120 Series Dimensions & Pressure Drop Curves
Dimensions

Filter Housing
Pressure Drop (PSID)
Flow Rate (GPM) Filter Element (9 Inch V-pak & C-pak) OFR-60 Pressure Drop (PSID)
Flow Rate (GPM)
Filter Element (18 Inch V-pak & C-pak) OFR-120 Pressure Drop (PSID)
Flow Rate (GPM)

Reference SSU = 150
Note:
Reference Specific Gravity = 0.9
Assembly Pressure Drop = Housing Pressure Drop+ Element Pressure Drop Housing Pressure Drop = PSID from curve above x (Actual specific gravity / Reference specific gravity) Element Pressure Drop = PSID from curve above x (Actual SSU/Reference SSU) x (Actual specific gravity / Reference specific gravity)
575

Return Filters
Vickers OFRS-25 Series Dimensions & Pressure Drop Curves

Flow Rate (GPM)
Fluid Conveying
Filter Element (5.8 Inch R-pak) Pressure Drop (PSID)
Flow Rate (GPM) Filter Element (8 Inch R-pak) Pressure Drop (PSID)
Flow Rate (GPM)
576

Return Filters
Vickers OFRS-60 Series Dimensions & Pressure Drop Curves

Dimensions

Filter Housing
Flow Rate (GPM) Pressure Drop (PSID) Filter Element (7 Inch R-pak)
Fluid Conveying
Flow Rate (GPM) Pressure Drop (PSID) Filter Element (11 Inch R-pak)
Flow Rate (GPM) Pressure Drop (PSID) Filter Element (11 Inch W-pak) (WATER REMOVING)
Flow Rate (GPM)

577

Pressure Filters
Vickers HF2P Series Dimensions & Pressure Drop Curves

Flow Rate (GPM)
Fluid Conveying
Element K Factor - PSI/GPM Element Type C-Pak C-Pak H-Pak H-Pak Element Length 4 inch 8 inch 4 inch 8 inch 03 Micron 2.046 1.011 2.396 0.865 05 Micron 1.735 0.858 1.688 0.820 10 Micron 0.924 0.457 1.026 0.499 25 Micron 0.531 0.262 ---
578

Pressure Filters
See element curves on page 581 Hydraulic Power & Control
Vickers OFP Series OFP065 Dimensions
OFP135 Dimensions
Bowl Length Code 1 2 3
H (in) 7.87 9.06 12.99
Bowl Length Code 1 2
H (in) 10.24 14.76


Filter Housing Pressure Drop (PSID) Pressure Drop (PSID) Filter Housing
Flow Rate (GPM)
Flow Rate (GPM)
579

Pressure Filters
See element curves on page 581
Vickers OFP Series OFP320/321 Dimensions
Fluid Conveying
Bowl Length Code 1 2 3 4
H (in) 11.81 16.54 22.09 27.20

Filter Housing
Flow Rate (GPM)
580

Pressure Filters
Vickers OFP Series Element Pressure Drop Curves (N Series, 300 PSI Collapse)
141 SUS oil
581

Hydraulic Power & Control Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control
582

Return Filters
Internormen TEF Series
583

Pressure Filters Internormen HP Series
Fluid Conveying
584
Technical Information Power Units & Accessories

GC8000 Series Model Codes

GC8000 M
1 (1) Valve Options No Release Valve Manual Release Valve Solenoid Release Valve
08
2
C
3
0
4
01
5
D
6
A
7 Code
A
8
12
9
3
10
A
11
12
12
0
13 14
Motor Terminal & Start Switch Location Views are shown on page 590 .
(5) Motor 12VDC Single Terminal Standard Duty 12VDC Double Terminal Medium Duty 12VDC Double Terminal Medium Duty with brkt. 24VDC Double Terminal Medium Duty 24VDC Double Terminal Medium Duty with brkt. 24VDC Single Terminal Standard Duty Ground Strap for motor Extended Shaft Adapter Drive
Kit. No. Code 1300027 A 1300618 B 1300623 C 1300619 D 1300624 E 1303173 1300620 1300335 F G
Code N M E O A
Kit. No. 1300209 Adapter Kit 1300191 Port Plug Kit 1300209 Adapter Kit 1300192 Man. Vlv Kit 1300209 Adapter Kit 1300023 12V Vlv Kit 1300024 24V Vlv Kit 1300209 Adapter Kit 1300783 12V Vlv Kit 1300784 24V Vlv Kit 01 20 30 40 50 60 7* 06
(8) Motor Start Switch
Descr.
Kit. No.
Manual OverRide Electrical Release Valve For Subplate Manifolds (A 1300846 Adapter Kit Series)
12VDC 3-Pole* 1300939 Case (Internal) Neg. grounded 24VDC 3-Pole* 1300106 12VDC 1300101 Externally 3-Pole Battery positive 24VDC 1300103 grounded 3-Pole 12VDC 1300937 Non-Grounded 4-Pole** (UL Required) 24VDC 4-Pole** 1300938 No Start Switch Required --
Note: Codes N, M, E and O require 2 kits. Non-stock item.
Code 04 06 08 10 12 16
(2) Gear Pump Size .125 Gear .187 Gear .250 Gear .312 Gear .375 Gear .500 Gear .065 cu.in. .097 cu.in. .129 cu.in. .161 cu.in. .194 cu.in. .258 cu.in
Kit. No. 1300174 1300176 1300171 1300625 1300169 1300172
* Required to change Medium Duty Double Terminal motor to Single Terminal. Substitute a 7 for the 0 in options 20, 30, 40 or 50. Non-stock item. Note: Double Terminal motors are used when an external ground is required. Code A B C D L M N H J (6) Reservoir 1 Quart (4.8 Dia.) 1.5 Quart (4.8 Dia.) 2 Quart (4.8 Dia.) 3 Quart (4.8 Dia.) 1 Gallon (6.6 Dia.) 1.5 Gallon (6.6 Dia.) 2 Gallon (6.6 Dia.) 2.5 Gallon (Rectangular) 4 Gallon (Rectangular) Kit. No. 1300134 1300135 1300028 1300039 1303176 1303177 1303178 1300125 1300284
* Recommended for most Single Terminal. ** Recommended for most Double Terminal. Non-stock item. Code 03 06 09 12 Code 0 1 2 3 4 5 (9) Motor Terminal Orientation At 3 OClock to Pad A At 6 OClock to Pad A At 9 OClock to Pad A At 12 OClock to Pad A (Std) (10) Start Switch Position No Start Switch Position 1 Position 2 Position 3 (Std) Position 4 Position 5 Kit. No. -1300626
Fluid Conveying
Code (3) Relief Valve Setting A B C D E 500 PSI 1000 PSI 1500 PSI 2000 PSI 2500 PSI
Kit. No. 1300116 1300116 1300021 1300021 1300021
Note: Relief valves are field adjustable from 100 to 3000 PSI. Consult us for settings above 2500 PSI.
Code (11) Mounting Position A B Code 03 06 09 12 Code 0 1 2 Horizontal Vertical (Elbow Fitting)
Note: Suction & Return Line parts included. (7) Adapter Code Mounting Position
Code 0 1 2 3 4
(4) Pressure Comp. Flow Regulator No Valve 1 GPM Valve 2 GPM Valve 3 GPM Valve 4 GPM Valve
Kit. No.
(12) Breather Position At 3 OClock to Pad A At 6 OClock to Pad A At 9 OClock to Pad A At 12 OClock to Pad A (Std) (13) Manifold Kit. No.
Kit. No. -1303448 1300022 1303451 1303452 A
B C D E F
Note: Not available with option A in Section 1
Std. mount Pad A down. Valves & -manifolds at 9 OClock (Side) Opt. mount Pad B down. Valves & -manifolds at 12 OClock (Up) Same as A except Motor 01 or 60 brkt on Pad A side 1300118 BrktKit Same as B except Motor 01 or 60 brkt on Pad B side 1300118 BrktKit Same as A except brkt on Pad A side Motor 30 or 50 Same as B except Motor 30 or 50 brkt on Pad B side
None -*D03 Primary Manifold 1300847 *D03 Secondary Manifold 1300848
Note: Must use Code A in Section 1. Code A (14) Pendant Control Kit. No.
Electric Cord Set for remote raise & lower 1300651 (used with opt. E Section 1)
585


GC8001 C
1 (1) Valve Options
08
2
D
3
01
4
L
5
A
6
A
7 Code
12
8
3
9
A
10
12 BH
11 12
1
13 14 Code 0 1 2 3 4 5
Motor Terminal & Start Switch Location Views are shown on page 590 .
(5) Reservoir 1 Quart (4.8 Dia.) 1.5 Quart (4.8 Dia.) 2 Quart (4.8 Dia.) 3 Quart (4.8 Dia.) 1 Gallon (6.6 Dia.) 1.5 Gallon (6.6 Dia.) 2 Gallon (6.6 Dia.) 2.5 Gallon (Rectangular) 4 Gallon (Rectangular)
Kit. No. 1300134 1300135 1300028 1300039 1303176 1303177 1303178 1300125 1300284
(9) Start Switch Position No Start Switch Position 1 Position 2 Position 3 (Std) Position 4 Position 5 Kit. No. -1300626
Code C
Kit. No.
D F
Cartridge Directional Valve 1300743 Adapter Kit D03 Valve Direct Mount 1300744 Adapter Kit Manual Valve 1303118 Adapter Direct Mount Kit
Note: Select valves and coils from Sections 12 and 13. Code 04 06 08 10 12 16 (2) Gear Pump Size .125 Gear .187 Gear .250 Gear .312 Gear .375 Gear .500 Gear .065 cu.in. .097 cu.in. .129 cu.in. .161 cu.in. .194 cu.in. .258 cu.in Kit. No. 1300174 1300176 1300171 1300625 1300169 1300172
A B C D L M N H J
Code (10) Mounting Position A B Code 03 06 09 12 Horizontal Vertical (Elbow Fitting)
Note: Suction & Return Line parts included. (6) Adapter Code Mounting Position A
Kit. No.
(11) Breather Position At 3 OClock to Pad A At 6 OClock to Pad A At 9 OClock to Pad A At 12 OClock to Pad A (Std) (12) Directional Control Valves 2-Position 4-Way 3-Position 4-Way Tandem Center 3-Position 4-Way Open Center Pilot Operated Check C1 Pilot Operated Check C2 Double Pilot Check 3-Position 4-Way Tandem Center Manual Valve with Integral Motor Relay Switch
Code (3) Relief Valve Setting A B C D E 500 PSI 1000 PSI 1500 PSI 2000 PSI 2500 PSI
Kit. No. 1300116 1300116 1300021 1300021 1300021
B C D E F
Note: Relief valves are field adjustable from 100 to 3000 PSI. Consult us for settings above 2500 PSI. Code 01 20 30 40 (4) Motor 12VDC Single Terminal Standard Duty 12VDC Double Terminal Medium Duty 12VDC Double Terminal Medium Duty with brkt. 24VDC Double Terminal Medium Duty 24VDC Double Terminal Medium Duty with brkt. 24VDC Single Terminal Standard Duty Ground Strap for motor Extended Shaft Adapter Drive Kit. No. 1300027 1300618 1300623 1300619 1300624 1303173 1300620 1300849
Std. mount Pad A down. Valves & -manifolds at 9 OClock (Side) Opt. mount Pad B down. Valves & -manifolds at 12 OClock (Up) Same as A except Motor 01 or 60 brkt on Pad A side 1300118 BrktKit Same as B except Motor 01 or 60 brkt on Pad B side 1300118 BrktKit Same as A except brkt on Pad A side Motor 30 or 50 Same as B except brkt on Pad B side Motor 30 or 50 (7) Motor Start Switch
Fluid Conveying
Code A B C F G H M
Kit. No. 1300729 1300785 1300786 1300727 1300728 1300763 1303121
Code A B C D E F G
Descr.
Kit. No.
50 60 7* 06
12VDC 3-Pole* 1300939 Case (Internal) Neg. grounded 24VDC 3-Pole* 1300106 12VDC 1300101 Externally 3-Pole Battery positive 24VDC 1300103 grounded 3-Pole 12VDC 1300937 Non-Grounded 4-Pole** (UL Required) 24VDC 4-Pole** 1300938 No Start Switch Required --
Note: Codes A, B, C, F and G require Valve Option C in Section 1. Code M requires Valve Option F in Section 1. To order a unit with both cartridge and pilot operated check valves, put both Order Codes in field 12. Must use adapter C in Section 1. Non-stock item. Code 1 2 (13) DC Valve Coil 12VDC 24VDC Kit. No. 1300740 1300741
* Required to change Medium Duty Double Terminal motor to Single Terminal. Substitute a 7 for the 0 in options 20, 30, 40 or 50. Non-stock item. Note: Double Terminal motors are used when an external ground is required.
* Recommended for most Single Terminal. ** Recommended for most Double Terminal. Non-stock item. Code 03 06 09 12 (8) Motor Terminal Orientation At 3 OClock to Pad A At 6 OClock to Pad A At 9 OClock to Pad A At 12 OClock to Pad A (Std)
Note: One coil is required for 2-Position valves, Two for 3-Position valves.
586

GC8000/GC8001 Series Output Flow & Current Draw

To find output flow at a certain pressure: Plot a vertical line from pressure up to dashed gear face line. Then plot a horizontal line from that intersection to left to find output flow. To find current draw at a certain pressure: Plot a vertical line from pressure up to solid gear face line. Then plot a horizontal line from that intersection to right to find current draw. Note: Performance curves are at a constant voltage using 200 SSU oil.
12VDC Standard Duty
12VDC Medium Duty
Current (Amps)
Current (Amps)
Flow (GPM)
Flow (GPM)
Fluid Conveying
Pressure (PSI)
Pressure (PSI)
24VDC Standard Duty
24VDC Medium Duty
Current (Amps)
Current (Amps)
Flow (GPM)
Flow (GPM)
Pressure (PSI)
Pressure (PSI)
587

GC8000/GC8001 Series Motor Duty Cycle

The curves below relate maximum on-time and percent on-time to motor current for the available motors. "Duty Cycle" refers to the length of time the motor can be run at a specific current before it must be turned off and allowed to cool. Allowable Percent On-Time is based on a percentage of a 5-minute or shorter duty cycle. For example, on the percent on-time curve, the 24 VDC motors at a current draw of 130 amps are capable of 10% on-time. The motor could be run for 30 seconds, then must be turned off and allowed to cool for 4-1/2 minutes. This duty cycle (30 seconds on, 4-1/2 minutes off) can then be repeated continuously. This ratio of 10% on-time to 90% off-time applies to any duty cycle of 5 minutes or less. Maximum On-Time is the absolute maximum continuous operating time at a specific current draw. For example, on the maximum on-time curve. the 12 VDC motors at a current draw of approximately 155 amps could be run for 5 minutes continuously. The motor should then be turned off and allowed to cool to ambient temperature. Having reached ambient temperature, the motor can again be run for 5 minutes. This run/cooling cycle can be continuously repeated. Note: The thermal characteristics of percent on-time and maximum on-time of the standard duty and medium duty motors are identical. The medium duty motors are UL listed and do offer extended brush life over the standard duty motors. Motor damage may result from operation outside the curve parameters as shown below.
Fluid Conveying
Allowable Percent On-Time
Maximum On-Time (Minutes)
Current (Amps)
Maximum On-Time (Minutes)
Percent On-Time
Current (Amps)
588

GC8000/GC8001 Series Dimensions

Power Unit with 4.8 Diameter Cylindrical Reservoir
Capacity 1 Quart 1.5 Quart 2 Quart 3 Quart
Length A (inches) 5.6 7.5 9.0 12.0
Installation Notes: Motors, Center Adapters and Reservoirs may be rotated in many combinations of 90 increments for maximum flexibility. An elbow fitting may be installed to point the filler/breather in the "up" position for vertical mount installations. Electric start switches may be mounted on the DC motor, or in a remote location. Motor lengths will vary.
Fluid Conveying
Power Unit with 6.6 Diameter Cylindrical Reservoir
Capacity
Length A (inches) 8.34 12.59 15.34
* Motor length will vary.
1 Gallon 1.5 Gallon 2 Gallon
589

GC8000/GC8001 Series Dimensions

Power Unit with Rectangular Reservoir
Capacity 2.5 Gallon 4 Gallon
Length A (inches) 12.00 18.50
* Motor length will vary.
Fluid Conveying
GC8000/GC8001 Series Motor Terminal & Start Switch Location Options

The motor terminal location must first be selected. Motor terminal locations of 03, 06, 09 and 12 are available. Second, the motor start switch location must be determined. Start switch positions 1 through 5 are available. Start switch positions rotate in conjunction with the motor terminal location. Note: The standard motor terminal location is 12 and the standard start switch position is 3. For single terminal motors use motor terminal 1 only for location purposes. Note: These locations are specified in the Model Codes.
View From Reservoir End The view above shows start switch locations 1-5 as they relate to motor terminal location 12 only. The example to the right shows a motor terminal location of 03 and a start switch position of 1.
590


GC9000 5
1 (1) Motor/Adapter Assemblies Code 0 1 2 3 4 5 6 7 8 9 HP 1/3 HP 1/2 HP 1/2 HP 1 HP 1 HP 1 HP 1 HP 2 HP 2 HP 2 HP Phase 1 3 1 3 1 3 1 3 1 3 RPM 1725 1725 1725 3450 3450 1725 1725 3450 3450 1725 Kit. No. 1300213 1300221 1300217 1300237 1300229 1300233 1303725 1303742 1300245 1300241 Code 0 1 2 3 4
C
2
A
3
0
4
B
5
0
6
T
7
0
8 (8) Reservoir Tube Kits Kit. No. -1300036 1300022 1300035 1300034 Code 0 1 3 Description None Required for Smaller Pumps Options A-D Kit for Cylindrical Reservoir (Required for Larger Pumps Options E-J) Kit for Cylindrical Reservoir (Required for 2-Stage Pump Option K) Required for 1 Gallon Vertical Reservoir Option U when larger pumps are used (Pump Options E-J) Required for 1.5 Gallon Vertical Reservoir Option V when larger pumps are used (Pump Options E-J) Required for 2 Gallon Vertical Reservoir Option W when larger pumps are used (Pump Options E-J) Required for 3 Gallon Vertical Reservoir Option X when larger pumps are used (Pump Options E-J) Kit. No. --
(4) Flow Controls Capacity None 1 GPM 2 GPM 3 GPM 4 GPM
1300187 1300186
Note: Can only be used in conjunction with a Release Valve. (5) Manifolds Code A B C Description No Manifold D03 Base Manifold for Cylindrical Reservoirs One D03 Base Manifold & One Secondary Manifold for Cylindrical Reservoirs One D03 Base Manifold & Two Secondary Manifolds for Cylindrical Reservoirs Kit. No. -1300329 1300329 and 1300330 1300329 and (2) 1300330
4*
1300801
Non-stock item. (2) Pumps GPM @ 1800 RPM 0.50 0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00 2.00/0.50* Displ. (cu.in.)
5*
1300802
6*
1300803
Fluid Conveying
Code A B C D E F G H J K
Kit. No. D
.064 1300177 .094 1300178 .129 1300179 .194 1300180 .258 1300181 .323 1300182 .388 1300183 .452 1300184 .517 1300185 .258/.064* 1300688
7*
1300804
To mount 1 valve, order option B. To mount 2 valves, order option C. To mount 3 valves, order option D. (6) Manifold Mounting Kits Code 0 1 2 Description None Two Stack Bolt Kit (required with Manifold Option C) Three Stack Bolt Kit (required with Manifold Option D) (7) Reservoirs Nominal Capacity (gal.) 1.0 1.5 2.0 3.0 1.0 1.50 2.0 3.0 Kit. No. -1300331 1300332
Non-stock item. Optional Kits
Description Adaptor Only Kit (No Motor) Nema 56C Frame Adaptor & Coupling Kit Extended Shaft Adaptor Kit 5 Gallon Rectangular Reservoir Kit 10 Gallon Rectangular Reservoir Kit 5 & 10 Gallon Rectangular Reservoir Tube Kit (Required when larger pumps are used (Pump Options E-J) 5 & 10 Gallon Rectangular Reservoir Tube Kit (Required when 2-Stage pump is used (Pump Option K) Non-stock item.
Kit. No. 1300268 1300843 1300654 1300117 1300108 1300188
Non-stock item. Note: All pumps are clockwise (RH) rotation. *Two-stage pump.
(3) Release Valves Code A C D Description Basic Adapter Only (no release valve) Manual Lever Release Electric Release Normally Closed 115VAC, 50.60 Hz. Electric Release Normally Closed Manual Override 115VAC, 50/60 Hz. Electric Release Normally Open 115VAC, 50.60 Hz. Kit. No. -1300193 1300025 Code Q R S T U V W X Type Cylindrical Cylindrical Cylindrical Cylindrical Vertical Mount Vertical Mount Vertical Mount Vertical Mount
Kit. No. 1300127 1300129 1300131 1300133 1300793 1300794 1300795 1300796
1300189
1300374
1300296
Non-stock item.
Non-stock item.
591

GC9000 Series Motor/Adapters

Motor/Adapter Kits Code Kit No. 0 1 2 3 4 5 6 7 8 9 1300213 1300221 1300217 1300237 1300229 1300233 1300225 1300249 1300245 1300241 HP 1/3 1/2 1/2 1 1 1 1 2 2 2 RPM 1725 1725 1725 3450 3450 1725 1725 3450 3450 1725 Phase 1 3 1 3 1 3 1 3 1 3 Hz 60 50/60 60 60 60 50/60 60 60 60 60 Voltage 115/208/230 208/230/460 115/208/230 208/230/460 115/208/230 208/230/460 115/208/230 230/460 115/230 230/460 Enclosure TENV TENV TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC A (in.) 9.153 9.593 8.653 9.093 10.593 11.093 11.593 10.593 12.093 11.593 Intermittent Duty Motor Ratings 5 Minutes 15 Minutes 30 Minutes .66 HP .75 HP @ 60 Hz .55 HP @ 50 Hz .80 HP 1.25 HP 1.1 HP 1.5 HP @ 60 Hz 1.1 HP @ 50 Hz 1.3 HP 3.0 HP 2.2 HP 2.5 HP
.66 HP .66 HP 1.0 HP @ 60 Hz .92 HP @ 60 Hz 1.0 HP @ 50 Hz .75 HP @ 50 Hz 1.2 HP 1.0 HP 2.0 HP 1.5 HP 2.0 HP 1.2 HP 2.0 HP @ 60 Hz 1.75 HP @ 60 Hz 1.5 HP @ 50 Hz 1.25 HP @ 50 Hz 2.0 HP 1.7 HP 4.0 HP 3.4 HP 3.0 HP 2.4 HP 4.0 HP 3.0 HP
Note: Intermittent Duty is defined as operation at one of the above limits continuously for the full time period, followed by one (1) hour off to allow motor to cool. Side View Front View GC9000
Fluid Conveying
GC9000 Series Reservoirs

Horizontal Mount Reservoirs
592

GC9000 Series Pumps & Performance Curves

Pumps Gear Size (in) 0.125 0.1875 0.250 0.375 0.500 0.625 0.750 0.875 1.000 0.500 0.125 Flow @ 1800 RPM Flow @ 3600 RPM Maximum Continuous Pressure (psi)
Code A B C D E F G H J K
Kit No. 1300177 1300178 1300179 1300180 1300181 1300182 1300183 1300184 1300185 1300688 (2-Stage)
Displacement (cu.in./rev) .064 .094 .129 .194 .258 .323 .388 .452 .517 .258 .064
0.50 GPM 1.00 GPM 3000 0.75 GPM 1.50 GPM 3000 1.00 GPM 2.00 GPM 3000 1.50 GPM 3.00 GPM 3000 2.00 GPM 4.00 GPM 2300 2.50 GPM 5.00 GPM 1900 3.00 GPM 6.00 GPM 1600 3.50 GPM 7.00 GPM 1300 4.00 GPM 8.00 GPM 1200 At 1725 RPM: 2.50 GPM to 350 PSI, 0.50 GPM to 2500 PSI At 3450 RPM: 5.00 GPM to 350 PSI, 1.00 GPM to 2500 PSI
Continuous Duty Performance Curves
GPM
GPM
PSI
PSI
593

GC9000 Series Valve Options
Manual Lever Release Valve
Electric Solenoid Release Valve
Release valves can be used in single acting cylinder applications for lowering the load. A fixed pressure compensated return flow control can be installed under the release valve.
Fluid Conveying
NFPA D03 Manifolds
Manifolds for GC9000 AC Power Units provide for single and multiple NFPA D03 directional valve combinations. All multiple valve combinations are for parallel circuits. A total of three valves can be mounted. An optional manual valve is shown in the picture above. A base (primary) manifold mounts directly to the adapter. This manifold kit includes all the hardware including check valve transfer bushing and return transfer bushing. If two or three valve are needed, secondary or stacked manifolds are added to the base manifold and secured with the proper mounting bolt kit. All manifolds are made from machined aluminum blocks. The cylinder ports are on the opposite side of the valve mounting surface and are 9/16-18 SAE straight thread o-ring.
594

HE2000 Series Model Codes

HE2
I II Order Code BA Valve Type Adapter, P & T Ports, Relief Valve & Check Valve Kit Description Adapter Port Plug Adapter Port Plug AC Motor Adapter Adapter Solenoid Release Valve Adapter Solenoid Release Valve AC Motor Adapter BE Manual Lowering Adapter w/ DC Contactor Kit No. 1303649 1300191 1303649 1300191 1303549 1303649 1303534 1303649 1303534 1303549
BH012
II
26
III
150
IV
E
V
82
VI
AF
VII
6
VIII
H
IX
2
X
KC
XI
0
XII
N
XIII
00
XIV
00
XV
A3
XVI
Example
Adapter Options + Coil Voltage BA000 Kit No.
CA
Adapter, P & T Ports, Relief Valve & Check Valve
CA000 BB012 BB024 CB115 CB230 CB012 CB024 12VDC 24VDC 115VAC 230VAC 12VDC 24VDC BE000 1300914 (1ea) 1300915 (1ea) 1303576 (1ea) 1303577 (1ea) 1300914 (1ea) 1300915 (1ea)
BB
Solenoid Lowering Adapter
CB
Solenoid Lowering Adapter
Adapter 1303649 Manual Release Valve w/ 1300192 Pilot Contactor Adapter 1303649 CE AC Manual Lowering Valve Adapter Manual Release Valve 1303533 AC Motor Adapter 1303549 Motor Spool (DC Version, AC Version & DC Version w/ Double P.O. Check) Adapter 1303650 BF012 Manifold 1300866 BF024 Manifold Adapter w/ 3-Pos 4-Way Valve (Motor Spool) BF DC Version Motor Spool Valve 1303382 Cavity Plug 1303540 Adapter 1303650 BH012 Manifold 1300866 BH024 BH Manifold Adapter w/ 3-Pos 4-Way Valve (Motor Spool) DC Version w/ Double P.O. Check Motor Spool Valve 1303382 Double P.O. Check 1303538 Adapter 1303650 CF115 Manifold 1300866 CF230 Motor Spool Valve 1303382 CF012 Manifold Adapter w/ 3-Pos 4-Way Valve (Motor Spool) CF AC Version Cavity Plug 1303540 CF024 Riser Block 1300855 AC Motor Adapter 1303549 Tandem Center Spool (DC & AC Versions) Adapter 1303650 BJ012 Manifold 1300856 BJ024 Manifold Adapter w/ 3-Pos 4-Way Valve (Tandem Center BJ Spool) DC Version Tandem Center Valve 1303530 Cavity Plug 1303540 Adapter 1303650 CJ115 Manifold 1300856 CJ230 Tandem Center Valve 1303530 CJ012 Manifold Adapter w/ 3-Pos 4-Way Valve (Tandem Center CJ Spool) AC Version Cavity Plug 1303540 CJ024 Riser Block 1300855 AC Motor Adapter 1303549 Note: AC coils have 36 inch cables. All DC coils have dual spades. Model Code is continued on next page
Fluid Conveying
CE000
12VDC 24VDC
1300914 (2ea) 1300915 (2ea)
12VDC 24VDC
1300914 (2ea) 1300915 (2ea)
115VAC 230VAC 12VDC 24VDC
1303576 (2ea) 1303577 (2ea) 1300914 (2ea) 1300915 (2ea)
12VDC 24VDC
1300914 (2ea) 1300915 (2ea)
1303576 (2ea) 1303577 (2ea) 1300914 (2ea) 1300915 (2ea)
595

HE2000 Series Model Codes (continued)

HE2
I II Order Code Valve Type Kit Description Kit No.
BH012
II
26
III
150
IV
E
V
82
VI
AF
VII
6
VIII
H
IX
2
X
KC
XI
0
XII
N
XIII
00
XIV
00
XV
A3
XVI
Example
Adapter Options + Coil Voltage 12VDC 24VDC Kit No. 1300914 (1ea) 1300915 (1ea)
BR
CR
BS
DA
DB
DC
DM AM
Solenoid Operated, 2-Position, 4-Way Normally Open Valve (DC & AC Versions) Adapter 1303650 BR012 Manifold 1300856 BR024 Manifold Adapter w/ Solenoid Operated, 2-Pos, 4-Way Valve, DC Version Normally Open Valve 1303529 Cavity Plug 1303540 Adapter 1303650 CR115 Manifold 1300856 CR230 Normally Open Valve 1303529 CR012 Manifold Adapter w/ Solenoid Operated, 2-Pos, 4-Way Valve, AC Version Cavity Plug 1303540 CR024 Riser Block 1300855 AC Motor Adapter 1303549 Adapter 1303650 BS012 Manifold 1300856 BS024 Manifold Adapter w/ Solenoid Operated, 2-Pos, 4-Way Valve, DC Version w/ P.O. Check Normally Open Valve 1303529 Single P.O. Check 1303539 Single D03 Valve Manifold (DC & AC Versions) / Double D03 Valve Manifold (AC Version Only) Adapter 1303650 Manifold Adapter w/ Single D03 Valve Manifold, DC VerD03 Manifold 1300854 sion Bolts 1300865 Adapter 1303650 D03 Manifold 1300854 Manifold Adapter w/ Single D03 Valve Manifold, AC VerBolts 1300857 sion Riser Block 1300855 AC Motor Adapter 1303549 Adapter 1303650 D03 Manifolds (2ea) 1300854 (2ea) Manifold Adapter w/ Double D03 Valve Manifold, AC Bolts 1300858 Version Only Riser Block 1300855 AC Motor Adapter 1303549 Manifold Adapter, DC Version Adapter 1303650 Adapter 1303650 Manifold Adapter, AC Version AC Motor Adapter 1303549
1303576 (1ea) 1303577 (1ea) 1300914 (1ea) 1300915 (1ea)
12VDC 24VDC
1300914 (1ea) 1300915 (1ea)
Fluid Conveying
DA000
DB000
DC000
DM000 AM000
Note: AC coils have 36 inch cables. All DC coils have dual spades.
III Order Code 08 12 16 20 26 32 38 43 48 57
W Series Pumps In /Rev 0.49 0.073 0.098 0.122 0.153 0.195 0.232 0.262 0.293 0.348 Cm /Rev 0.8 1.2 1.6 2.0 2.6 3.2 3.8 4.3 4.8 5.7 Kit No. 1303435 1303436 1303437 1303438 1303439 1303440 1303441 1303442 1303443 1303444
Maximum Pressure (PSI) Continuous Intermittent 3335 3335 3335 3335 3335 3335 3045 2755 2465 2103 3698 3698 3698 3698 3698 3698 3335 3045 2712 2320
III Order Code 70 71 72 73 74 76 77 78
GC Series Pumps In /Rev 0.065 0.097 0.129 0.162 0.194 0.259 0.323 0.388 Cm /Rev 1.06 1.59 2.12 2.65 3.18 4.24 5.30 6.36 Kit No. 1300174 1300176 1300171 1300625 1300169 1300172 1300931 1300932
Maximum Pressure (PSI) Continuous 3000 3000 3000 3000 3000 2300 1900 1600 Intermittent 4000 4000 4000 4000 4000 4000 3000 2500
Model Code is continued on next page
596


HE2
I IV
BH012
II
26
III
150
IV
E
V
82
VI
AF
VII
6
VIII
H
IX
2
X
KC
XI VI
0
XII
N
XIII
00
XIV
00
XV
A3
XVI
Example
Relief Valve Setting Setting Range (PSI) 200 - 500 501 - 1500 1501 - 2500 2501 - 4000 Flow Control Valve Description None 1 GPM 2 GPM 2.5 GPM 3 GPM 4 GPM Kit No. N/A 1303448 1303450 1303453 1303451 1303452 Kit No. 1303659 1303660 1303661 1303662
Order Code Setting Range (Bar) (Bars) 014 - 333 034 - 103 104 - 173 174 - 276 V Order Code A E K M N R
Order Code 83 84 85 86 VII Order Code AA AB AC AD AE AF AG AJ AK AL AM AN AP
Motor (continued) 24VDC Single Terminal - Medium Duty w/ Ground Strap 24VDC Double Terminal - Medium Duty 24VDC Double Terminal - Medium Duty - Low Speed Compound 24VDC Double Terminal - Heavy Duty
Kit No. 1300912 1300619 1300913 1303551
Reservoir 1 Quart Steel 1.5 Quart Steel 2 Quart Steel 3 Quart Steel 0.8 Quart Plastic (175F Max) 1.3 Quart Plastic (175F Max) 1.7 Quart Plastic (175F Max) 1 Gallon Steel 1.5 Gallon Steel 2 Gallon Steel 3 Gallon Steel 2.5 Gallon Steel, Rectangular 4 Gallon Steel, Rectangular
Kit No. 1300897 1300898 1300899 1300900 1300901 1300902 1300903 1300904 1300905 1300906 1300907 1300908 1300909
Fluid Conveying
VI Order Code 54 55 60 62 63 64 65 66 67 68 69 70 71 72 73 74 80 82 Motor Extended Shaft Adapter AC Flange Nema C Adapter 1/2 HP (30 min), 3 Phase, 50/60 Hz, 208-230/ 460 VAC, TENV, 1425/1725 RPM 1 HP (30 min), 3 Phase, 50/60 Hz, 208-230/ 460 VAC, TENV, 2850/3450 RPM 1 HP (30 min), 3 Phase, 50/60 Hz, 208-230/ 460 VAC, TEFC, 2850/3450 RPM 1 HP, 1 Phase, 60 Hz, 115/208-230 VAC, TENV, 3450 RPM 1 HP, 1 Phase, 50/60 Hz, 115/208-230 VAC, TEFC, 2850/3450 RPM 1 HP, 3 Phase, 50/60 Hz, 208-230/460 VAC, TENV, 1425/1725 RPM 1 HP (30 min), 1 Phase, 60 Hz, 115/208-230 VAC, TENV, 1725 RPM 2 HP (30 min), 1 Phase, 60 Hz, 115/208-230 VAC, TENV, 3450 RPM 2 HP, 1 Phase, 50/60 Hz, 115/208-230 VAC, TEFC, 2850/3450 RPM 2 HP (30 min), 3 Phase, 50/60 Hz, 208-230/ 460 VAC, TENV, 1425/1725 RPM 2 HP (30 min), 1 Phase, 60 Hz, 115/208-230 VAC, TENV, 1725 RPM 3 HP (30 min), 3 Phase, 50/60 Hz, 208-230/ 460 VAC, TENV, 2850/3450 RPM 3 HP, 3 Phase, 50/60 Hz, 208-230/460 VAC, TEFC, 2850/3450 RPM 2.5 HP (30 min), 1 Phase, 50/60 Hz, 208-230 VAC, TENV, 2850/3450 RPM 12VDC Single Terminal - Standard Duty 12VDC Double Terminal - Medium Duty Kit No. 1300335 1303543 1300916 1300918 1300919
VIII 1300920 1300921 1300922 1300923 1300924 1300925 1300926 1300927 1300928 1300929 1300930 1300027 1300618 Model Code is continued on next page Order Code A 0 3 6 9 Motor Terminal Position No Motor 12 OClock 3 OClock 6 OClock 9 OClock
Note: Location relative to Pad A as viewed from reservoir end
Note: Motors continued at top of next column.

597


HE2
I IX Order Code A H J K L M N P Q R S T Start Switch None 12VDC - UL Recognized, 4-Pole 12VDC - UL Recognized, 4-Pole 12VDC, 3-Pole 24VDC, 3-Pole 12VDC, Heavy-Duty, 4-Pole 24VDC, Heavy Duty, 4-Pole 1 Phase, 115VAC (only for motor codes 64, 65, 67, 68, 69 & 71) 1 Phase, 230VAC (only for motor codes 64, 65, 67, 68, 69 & 71) 1 Phase, 230VAC (only for motor code 74) 3 Phase, 230VAC (only for motor codes 60, 62, 63, 66, 70, 72 & 73) 3 Phase, 460VAC (only for motor codes 60, 62, 63, 66, 70, 72 & 73) Start Switch Position Kit No. N/A 1300937 1300938 1300939 1300940 1300941 1300942 1303546 1303545 1303544 1303548 1303547
BH012
II
26
III
150
IV
E
V
82
VI
AF
VII
6
VIII
H
IX
2
X
KC
XI XI
0
XII
N
XIII
00
XIV
00
XV
A3
XVI
Example
Tube Kits Mount Pump Series Pad A Kit No. Material Steel Steel Steel Steel Steel Plastic Plastic Plastic Plastic Plastic Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Rectangular Rectangular Rectangular Rectangular Rectangular Rectangular
Order Code Quarts AD BD CD DD ED FD GD HD JD KD AE BE CE DE EE AF BF CF DF EF AG BG CG DG EG AH BH CH DH EH AJ BJ CJ DJ EJ AK BK CK AL BL CL 2 2 2 2 2 1.7 1.7 1.7 1.7 1.7 3 3 3 3 3 Gallons 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 3 3 3 3 3 2.5 2.5 2.5 4 4 4
Fluid Conveying
Horizontal GC Down 1300867 Horizontal GC/W @ 9:00 1300868 Horizontal W Down 1300943 Vertical GC N/A 1300877 Vertical W N/A 1300891 Horizontal GC Down 1300961 Horizontal GC/W @ 9:00 1300963 Horizontal W Down 1300962 Vertical GC N/A 1300977 Vertical W N/A 1300978 Horizontal GC Down 1300873 Horizontal GC/W @ 9:00 1300874 Horizontal W Down 1300946 Vertical GC N/A 1300878 Vertical W N/A 1300878 Horizontal Horizontal Horizontal Vertical Vertical Horizontal Horizontal Horizontal Vertical Vertical Horizontal Horizontal Horizontal Vertical Vertical Horizontal Horizontal Horizontal Vertical Vertical Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal GC GC/W W GC W GC GC/W W GC W GC GC/W W GC W GC GC/W W GC W GC GC/W W GC GC/W W Down @ 9:00 Down N/A N/A Down @ 9:00 Down N/A N/A Down @ 9:00 Down N/A N/A Down @ 9:00 Down N/A N/A Down @ 9:00 Down Down @ 9:00 Down 1300867 1300868 1300943 1300891 1300957 1300873 1300874 1300946 1300892 1300958 1300873 1300874 1300946 1300893 1300959 1300873 1300874 1300946 1300894 1300960 1300873 1300874 1300946 1300873 1300874 1300946
X Order Code A 1 2 4 5 7 0 3 9
No Switch or Push Button DC Units (Relative to Motor Terminals) 10 OClock 12 OClock 11 OClock 1 OClock 2 OClock AC Units Push Button (Reservoir End Down - Pad A 12 OClock 3 OClock 9 OClock
XI Order Code Quarts AB BB CB DB EB FB GB HB JB KB JC KC 1 1 1 1 1 0.8 0.8 0.8 0.8 0.8 1.3 1.3 Mount
Tube Kits Pump Series Pad A Kit No. 1300867 1300868 1300943 1300875 1300953 1300961 1300963 1300962 1300973 1300974 1300975 1300976 Material Steel Steel Steel Steel Steel Plastic Plastic Plastic Plastic Plastic Plastic Plastic
Horizontal GC Down Horizontal GC/W @ 9:00 Horizontal W Down Vertical GC N/A Vertical W N/A Horizontal GC Down Horizontal GC/W @ 9:00 Horizontal W Down Vertical GC N/A Vertical W N/A Vertical GC N/A Vertical W N/A
Model Code is continued on next page
Note: Tube Kits continued at top of next column.
598


HE2
I
BH012
II
26
III
150
IV
E
V
82
VI
AF
VII
6
VIII
H
IX
2
X
KC
XI
0
XII
N
XIII
00
XIV
00
XV
A3
XVI
Example
XII Order Code 0 3 6 9 Breather Position 12 OClock 3 OClock 6 OClock 9 OClock
XVI Order Code A 3 Design Series Major Change to Form, Fit or Function Minor Design Change
Note: Design Series is assigned by the factory at the current level
Note: Location relative to Pad A as viewed from reservoir face XIII Order Code A B C D N Coil Terminal / Lever Position 12 OClock - Toward Motor 3 OClock - Away From Center 6 OClock - Toward Reservoir 9 OClock - Toward Center None
Fluid Conveying
Note: Location relative to Motor as viewed from top of coil or top of manual release XIV & XV Order Code 00 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Accessory (Maximum of 2 can be specified) No Accessories DC - Rubber Terminal Boots (Qty of 4) AC - Plain Pigtail (Exits box from orientation 3) AC - Plain Pigtail (Exits box from orientation 0) AC - Plain Pigtail (Exits box from orientation 9) AC - Pigtail w/ 115VAC Male Wall Plug (Exits box from orientation 3) AC - Pigtail w/ 115VAC Male Wall Plug (Exits box from orientation 0) AC - Pigtail w/ 115VAC Male Wall Plug (Exits box from orientation 9) AC - Pigtail w/ 115VAC Male Twist Lock Plug (Exits box from orientation 3) AC - Pigtail w/ 115VAC Male Twist Lock Plug (Exits box from orientation 0) AC - Pigtail w/ 115VAC Male Twist Lock Plug (Exits box from orientation 9) AC - Pigtail w/ 115VAC Male/Female Twist Lock Plug (Exits box from orientation 3) AC - Pigtail w/ 115VAC Male/Female Twist Lock Plug (Exits box from orientation 0) AC - Pigtail w/ 115VAC Male/Female Twist Lock Plug (Exits box from orientation 9) AC - Single Acting Pendant (Exits box from orientation 3) AC - Single Acting Pendant (Exits box from orientation 0) AC - Single Acting Pendant (Exits box from orientation 9) DC - Single Acting Pendant DC - Double Acting Pendant Kit No. N/A 1303553 1303554 1303554 1303554 1303557 1303557 1303557 1303560 1303560 1303560 1303563 1303563 1303563 1303566 1303566 1303566 1303569 1303570
Note: Box refers to conduit box.
599

HE2000 Series Adapter/Circuit Options
Fluid Conveying
600

HE2000 Series Adapter/Circuit Options (continued)
601

Fluid Conveying
602

603

HE2000 Series Selecting Pump & DC Motor Combinations (example)
Fluid Conveying
Relief Valve Characteristics
604

HE2000 Series Performance for 12VDC Single Terminal Series Wound Motor, P/N 130027
Note: Motor damage may result from operation outside the curve parameters as shown above.
Performance for 12VDC Double Terminal Series Wound Motor, P/N 1300618
605

HE2000 Series Performance for 24VDC Double Terminal (P/N 1300619) and Single Terminal (1300912) Series Wound Motors
Fluid Conveying
606

HE2000 Series Dimensions DC Motor with 6.6 Inch Cylindrical Reservoir
DC Motor with Rectangular Reservoir
607

HE2000 Series Pump & AC Motor Selection / Combinations

The nominal rated horsepower for TENV motors is based on a 30 minute duty cycle. The nominal rated horsepower for TEFC motors is based on continuous duty. For 50 Hz operation, pump flow and horsepower shown below need to be derated by approximately 20%. For TEFC motors the 30 minute rated horsepower is a continuous rating.
60 Hertz Ratings Max cc/rev Starting at 2500 PSI Low 5 15 30 min min min Line Low Voltage 1 0.75 0.5 1 1 1 1 1 1 2 2 2 2 3 3 2.5 230 230 230 115 115 230 115 115 115 230 115 230 230 230 188 188 188 99 99 188 99 99 99 188 99 188 188 188 1.6 1.6 1.6 1.6 1.6 3.2 3.2 2.1 2.1 6.4 4.8 3.2 3.2 3.7 Rated HP Voltage Pullup Breakdown Torque Torque at at 5 Min Duty HP Line Line Voltage Voltage Nominal Amp Ft-lbs Ft-lbs Draw 6.2 6.4 6.4 5.7 5.1 12.3 9.1 7.4 5.4 24.0 17 12.6 12.6 9.3 9.0 6.7 6.7 6.9 6.0 17.1 10.8 7.7 8.0 26.5 19 14.6 14.6 10.7 3.5 A @230V 8.4 A @230V 8.4 A @ 230V 28.6 A @115V 28.6 A @ 115V 8.4 A @ 230V 8.5 A @ 230V 27 A @ 115V 30.2 A @ 115V 5.7 A @ 230V 35 A @ 115V 13.7 A @ 230V 13.7 A @ 230V 20.1 A @ 230V
Model Code Kit No. 60 62 63 64 65 66
HP
Phase & Voltage Hertz 3PH 208-230/460 50/60 3PH 208-230/460 50/60 3PH 208-230/460 50/60 1PH 115/208-230 60 1PH 115/208-230 50/60 3PH 208-230/460 50/60 1PH 115/208-230 60 1PH 115/208-230 60 1PH 115/208-230 50/60 3PH 208-230/460 50/60 1PH 115/208-230 60 3PH 208-230/460 50/60 3PH 208-230/460 50/60 1PH 208-230 50/60
Encl
RPM
1300916 0.5 1300918 1300919 1300920 1300921 1300922 1300923 1300924 1300925 1300926 1300927 1300928 1300929 1 1 1 1 1 1 2 2 2 2 3 3
TENV 1425/1725
TENV 2850/3450 2.5 1.8 TEFC 2850/3450 2.5 1.8 TENV 3450 2.5 1.8
TEFC 2850/3450 2.5 1.8 TENV 1425/1725 TENV TENV 1725 3450 3 2 4 3 4 3 2 1.5 3 2.5 3.5 2.5
Fluid Conveying
67 68 69 70 71
TEFC 2850/3450 TENV 1425/1725 TENV 1725
72 73 74
TENV 2850/3450 4.9 3.8 TEFC 2850/3450 4.9 3.8 TENV 2850/3450 3.5 3
1300930 2.5
The curves below demonstrate the relationship between flow and pressure to determine horsepower need. Once horsepower is determined, refer to the above chart to determine the appropriate motor for the required duty cycle.
608

HE2000 Series Dimensions AC Motor with 6.6 Inch Cylindrical Reservoir
Dimensions Model Code 60 62 63 64 65 66 67 L 5.8 5.8 7.5 7.8 9.5 6.8 9.3 H 6.8 6.8 7.3 8.8 8.8 6.8 9.0 K 4.0 4.0 4.0 4.3 4.3 5.0 5.8 Model Code 68 69 70 71 72 73 74
Dimensions L 9.8 11.0 8.8 9.8 6.8 9.5 9.8 H 8.8 8.8 6.8 8.6 6.8 6.8 9.1 K 6.2 5.8 5.3 6.3 3.3 4.3 6.2
AC Motor with Rectangular Reservoir
609

HE2000 Series Orientation DC Motor Terminal / AC Motor Foot Bracket Orientation Relative to Pad A
Fluid Conveying
DC - Start Switch Orientation Relative to Terminals AC - Push Button Start Switch or Accessory Location on Conduit Box
610

HE2000 Series Orientation (continued) Breather Orientation Relative to Pad A (Reservoir End View)
Coil Termination (Spade Terminal or Wire Leads) Relative to Motor for Solenoid Acting Release Valves
Lever Orientation Relative to Motor for Manual Release Valves
611

Flexible Couplings

Dimensions
Dimensions
Coupling Size FC050B FC070B FC075B FC090B FC090U FC095B FC095U FC099B FC099U FC100B FC100U FC110B FC110U FC150B FC150U FC190B FC190U FC225B FC225U A (in) 1-3/32 1-3/8 1-3/4 2-1/8 2-1/8 2-1/8 2-1/8 2-9/16 2-9/16 2-9/16 2-9/16 3-5/16 3-5/16 3-3/4 3-3/4 4-1/2 4-1/2 5 5 B (in) 1-5/8 2 2-1/8 2-5/16 2-5/16 2-3/4 2-3/4 2-13/16 2-13/16 3-1/2 3-1/2 4-1/4 4-1/4 4-1/2 4-1/2 5-1/4 5-1/4 6 6 C Min. (in) 7/16 7/16 7/16 7/16 7/16 7/16 7/16 5/8 5/8 5/8 5/8 3/4 3/4 7/8 7/8 15/16 15/16 15/16 15/16 C Max. (in) 5/8 3/4 7/8 1-1/16 1-1/16 1-1/16 1-1/16 1-5/16 1-5/16 1-5/8 1-5/8 1-3/4 1-3/4 2 2 2-9/16 2-9/16 2-3/4 2-3/4 Max. RPM 4500 4500 4500 4500 4500 4500 4500 4000 4000 4000 4000 3600 3600 3100 3100 2800 2800 2600 2600
Horsepower Ratings
HP Per 100 RPM Service Factor (See Next Page) 1.0 0.04 0.06 0.12 0.20 0.28 1.5 0.03 0.04 0.08 0.13 0.18 2.0 0.02 0.03 0.06 0.10 0.14 2.5 0.02 0.02 0.05 0.08 0.11 3.0 0.01 0.02 0.04 0.06 0.09
Fluid Conveying
0.60 1.00 1.10 2.40 1.80 3.50 2.40 4.70 3.50 6.00
0.40 0.66 0.73 1.60 1.20 2.33 1.60 3.13 2.30 4.00
0.30 0.50 0.55 1.20 0.90 1.75 1.20 2.35 1.70 3.00
0.24 0.40 0.44 0.96 0.72 1.40 0.96 1.88 1.40 2.40
0.20 0.33 0.36 0.80 0.60 1.16 0.80 1.56 1.16 2.00
Common Electric Motor Shafts (Additional Dimensions on page 614 ) C-Face Motors C-Face Motors Non C-Face Motors
HP 1/6 - 3 1 1-1/2 2 3 5 7-1/2 10 15 20 25 RPM 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 Frame 56C 143TC 145TC 145TC 182TC 184TC 213TC 215TC 254TC 256TC 284TC Shaft Dia. Key (in) (in) 5/8 7/8 7/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 1-7/8 3/16 3/16 3/16 3/16 1/4 1/4 5/16 5/16 3/8 3/8 1/2 HP 30 40 50 60 RPM 1800 1800 1800 1800 Frame 286TC 324TC 326TC 364TC Shaft Dia. Key (in) (in) 1-7/8 2-1/8 2-1/8 2-3/8 1/2 1/2 1/2 5/8 HP 3 5 7-1/2 10 15 20 25 30 40 50 60 RPM 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 Frame 182T 184T 213T 215T 254T 256T 284T 286T 324T 326T 364T Shaft Dia. Key (in) (in) 1-1/8 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 1-7/8 1-7/8 2-1/8 2-1/8 2-3/8 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2 1/2 1/2 5/8
Non C-Face Motors

HP 1/2 - 2 1 2 RPM 1800 1800 1800 Frame 56 143T 145T Shaft Dia. Key (in) (in) 5/8 7/8 7/8 3/16 3/16 3/16
612

Flexible Couplings

Service Factors
613

Electric Motors
Nema C-Face Electric Motor Flange & Shaft Dimensions
Frame Size(s) 56C 143TC 145TC 182TC 184TC 213TC 215TC 254TC 256TC 284TSC 286TSC 284TC 286TC 324TSC 326TSC 324TC 326TC 364TSC 365TSC 364TC 365TC 404TSC 405TSC 404TC 405TC 444TSC 449TSC 444TC 449TC
AH 2.062 2.125 2.625 3.125 3.75 3.00 4.375 3.50 5.00 3.50 5.62 4.00 7.00 4.50 8.25
U 5/8 7/8 1-1/8 1-3/8 1-5/8 1-5/8 1-7/8 1-7/8 2-1/8 1-7/8 2-3/8 2-1/8 2-7/8 2-3/8 3-3/8
S 3/16 3/16 1/4 5/16 3/8 3/8 1/2 1/2 1/2 1/2 5/8 1/2 3/4 5/8 7/8
AK 4.50 4.50 8.50 8.50 8.50 10.50 10.50
AJ
BF
HorsePower at 1800 RPM 1/4, 1/2 1, 2 3, 5 7-1/2, 10 15, 20 25, 30 25, 30 40, 50 40, 50 60, 75 60, 75 100, 125 100, 125 150, 200 150, 200
5.875 3/8-16 5.875 3/8-16 7.25 7.25 7.25 9.00 9.00 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13
12.50 11.00 5/8-11 12.50 11.00 5/8-11 12.50 11.00 5/8-11 12.50 11.00 5/8-11 12.50 11.00 5/8-11 12.50 11.00 5/8-11 16.00 14.00 5/8-11 16.00 14.00 5/8-11
Fluid Conveying
614
Technical Information Hydraulic System Accessories

Heat Exchangers
Thermal Transfer AOHM Performance Curves
BTU PER HOUR AT 50F ETD
OIL FLOW - GPM SELECTION PROCEDURE Performance Curves are based on 50 SSU oil entering the cooler 50F higher than the ambient air temperature used for cooling. This is referred to as a 50F ETD. Step 1. Determine the Heat Load. This will vary with different systems, but typically coolers are sized to remove 25-50% of the input nameplate horsepower. If BTU to be removed is known, HP = BTU per hr. / 2545. Step 2. Determine the Entering Temperature Difference. The entering oil temperature is generally the maximum desired oil temperature. Entering oil temperature - Ambient air temperature = ETD. Step 3. Determine Curve Heat Dissipation BTU/Hr. BTU heat load x (50F/ETD) x Viscosity Correction A = Curve Heat Dissipation. Step 4. Enter curves at oil flow through cooler and curve heat dissipation. Any curve above the intersecting point will work. Step 5. Determine Oil Pressure Drop from Curves. = 5 PSI = 10 PSI = 20 PSI Multiply pressure drop from curve by Viscosity Correction B. Miscellaneous Products Indexes & Technical Information
615

Heat Exchangers
Thermal Transfer DH & DHR Series Performance Curves
Fluid Conveying
OIL FLOW - GPM
616

Heat Exchangers
Thermal Transfer DH & DHR Series Performance Curves

SELECTION PROCEDURE Performance Curves are based on 50 SSU oil, 1000 Standard Feet per Minute (SFPM) Air Velocity, and oil entering the cooler 50F higher than the ambient air temperature used for cooling (This is referred to as a 50F ETD). Step 1. Determine the Heat Load. This will vary with different systems, but typically coolers are sized to remove 25-50% of the input nameplate horsepower. If BTU to be removed is known, HP = BTU per hr. / 2545. Step 2. Determine the Entering Temperature Difference. The entering oil temperature is generally the maximum desired oil temperature. Entering oil temperature - Ambient air temperature = ETD. Step 3. Determine Air Velocity Correction Factor. A. If SFPM air velocity is known, read value from curve on previous page. (A reasonable assumption is 750 SFPM). B. If SCFM (Standard Cubic Feet per Minute) air flow is known, calculate velocity as follows: SFPM Air Velocity = (SCFM Air Flow / Sq. Ft. Face Area of Cooler). Step 4. Calculate corrected heat load to enter curves. Cooler Heat Dissipation = BTU/Hr. Heat load x [50F / (Desired ETD x Air Velocity Correction Factor)] Step 5. Enter the Performance Curves at the bottom with the GPM oil flow and proceed upward to the adjusted heat load from step 4. Any curve on or above this point will meet these conditions. Step 6. Multiply oil Pressure Drop from curve by correction factor found in Oil P Correction Curve.
617

Heat Exchangers
Thermal Transfer EK Series Performance Curves

HIGH WATER USAGE 1:1 OIL TO WATER RATIO 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. EK-505-O EK-508-O EK-510-O EK-512-O EK-514-O EK-518-O EK-524-O EK-536-O EK-708-O EK-712-O EK-714-O Models 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. EK-718-0 EK-724-O EK-736-O EK-1012-O EK-1014-O EK-1018-O EK-1024-O EK-1036-9-O EK-1036-6-O EK-1048-8-O EK-1048-6-O
HORSEPOWER REMOVED IN COOLER
Oil Viscosity Correction Multipliers
Fluid Conveying
Viscosity Correction
OIL FLOW - GPM
Oil Viscosity - SSU
SELECTION PROCEDURE Performance Curves are based on 100 SSU oil leaving the cooler 40F higher than the incoming water temperature used for cooling. This is referred to as a 40F approach temperature. Step 1. Determine the Heat Load. This will vary with different systems, but typically coolers are sized to remove 25-50% of the input nameplate horsepower. If BTU to be removed is known, HP = BTU per hr. / 2545. Step 2. Determine Approach Temperature. Desired temp F oil leaving cooler - Water Inlet Temp F = Actual Approach F (Max. Reservoir Temp). Step 3. Determine Curve Horsepower Heat Load. HP Heat Load x (40 / Actual Approach) x Viscosity Correction A = Curve HP Step 4. Enter curves at oil flow through cooler and curve horsepower. Any curve above the intersecting point will work. Step 5. Determine Oil Pressure Drop from Curves. = 5 PSI = 10 PSI = 20 PSI Multiply pressure drop from curve by correction factor B found in oil viscosity correction curve.
618

Heat Exchangers

MEDIUM WATER USAGE 2:1 OIL TO WATER RATIO 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. EK-505-T EK-508-T EK-510-T EK-512-T EK-514-T EK-518-T EK-524-T EK-536-T EK-708-T EK-712-T EK-714-T Models 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. EK-718-T EK-724-T EK-736-T EK-1012-T EK-1014-T EK-1018-T EK-1024-T EK-1036-9-T EK-1036-6-T EK-1048-8-T EK-1048-6-T
Fluid Conveying
OIL FLOW - GPM
Oil Viscosity - SSU
619

Heat Exchangers

LOW WATER USAGE 4:1 OIL TO WATER RATIO 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. EK-505-T EK-508-T EK-518-T EK-708-F EK-714-F EK-724-F EK-736-F EK-708-T EK-712-T EK-718-T EK-736-T Models 12. 13. 14. 15. 16. 17. 18. 19. EK-1012-T EK-1014-F EK-1018-T EK-1024-F EK-1036-9-T EK-1036-6-F EK-1048-8-T EK-1048-6-F
Fluid Conveying
OIL FLOW - GPM
Oil Viscosity - SSU
620

Heat Exchangers
Thermal Transfer M & MR Series Performance Curves
OIL FLOW - GPM Miscellaneous Products SELECTION PROCEDURE Performance Curves are based on 50 SSU oil, 1000 Standard Feet per Minute (SFPM) Air Velocity, and oil entering the cooler 50F higher than the ambient air temperature used for cooling (This is referred to as a 50F ETD). Step 1. Determine the Heat Load. This will vary with different systems, but typically coolers are sized to remove 25-50% of the input nameplate horsepower. If BTU to be removed is known, HP = BTU per hr. / 2545. Step 2. Determine the Entering Temperature Difference. The entering oil temperature is generally the maximum desired oil temperature. Entering oil temperature - Ambient air temperature = ETD. Step 3. Determine Air Velocity Correction Factor. A. If SFPM air velocity is known, read value from curve above. (A reasonable assumption is 750 SFPM). B. If SCFM (Standard Cubic Feet per Minute) air flow is known, calculate velocity as follows: SFPM Air Velocity = (SCFM Air Flow / Sq. Ft. Face Area of Cooler). Step 4. Calculate corrected heat load to enter curves. Cooler Heat Dissipation = BTU/Hr. Heat load x [50F / (Desired ETD x Air Velocity Correction Factor)] Step 5. Enter the Performance Curves at the bottom with the GPM oil flow and proceed upward to the adjusted heat load from step 4. Any curve on or above this point will meet these conditions. Step 6. Multiply oil Pressure Drop from curve by correction factor found in Oil P Correction Curve.
621

Heat Exchangers
Thermal Transfer MF Series Performance Curves
Fluid Conveying
OIL FLOW - GPM SELECTION PROCEDURE Performance Curves are based on 50 SSU oil entering the cooler 50F higher than the ambient air temperature used for cooling. This is referred to as a 50F ETD. Step 1. Determine the Heat Load. This will vary with different systems, but typically coolers are sized to remove 25-50% of the input nameplate horsepower. If BTU to be removed is known, HP = BTU per hr. / 2545. Step 2. Determine the Entering Temperature Difference. The entering oil temperature is generally the maximum desired oil temperature. Entering oil temperature - Ambient air temperature = ETD. Step 3. Determine Curve Heat Dissipation BTU/Hr. BTU heat load x (50F/ETD) = Curve Heat Dissipation. Step 4. Enter curves at oil flow through cooler and curve heat dissipation. Any curve above the intersecting point will work. Step 5. Determine Oil Pressure Drop from Curves. = 5 PSI = 10 PSI = 20 PSI Multiply pressure drop from curve by correction factor found in oil P correction curve.
622

Heat Exchangers
Vickers OCW Series Performance Curves
623
Notes
624
Notes
625
Notes
626
Notes
627
Notes
628

Category Page 630 630 632 634 635 636 656 657 658 659 660 662 663 663 664 665 666 666 667 668 671 Hydraulic Power & Control Pneumatic Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . American Cylinder 76 Series Aluminum Barrel 3/4 to 2-1/2 Inch Bore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Silverair Series Stainless Steel Barrel 1/2 to 2-1/2 Inch Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . American Cylinder Stainless Steel Series Stainless Steel Barrel 7/16 to 1-1/2 Inch Bore . . . . . . . . . . . . . . Aro Economair Series Medium To Heavy Duty Repairable 1-1/8 to 4 Inch Bore . . . . . . . . . . . . . . . . . Pneumatic Valves & Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Aro-Flo Series FRL's . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Aro-Flo Series Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Aro-Flo Series Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Aro-Flo Series Piggyback Filter/Regulators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Aro-Flo Series Lubricators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics FlexiBlok Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics FlexiBlok Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics FlexiBlok Piggyback Filter/Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics FlexiBlok Lubricators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pneumatic System Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air Tool Hose Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Air Line Lubricating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Pop-Off Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pneumatic Cylinders Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
629
Pneumatic Cylinders
American Cylinder 76 Series Aluminum Barrel
3/4 to 2-1/2 Inch Bore Aluminum Barrel American Cylinder 76 Series
American Cylinder 76 Series round cylinders are designed for applications where a disposable, light duty cylinder is preferred. Prelubed, they're suitable for operations without externally applied lubrication (Factory does recommend periodic direct lubrication or continuous air line mist lubrication for maximum service life). Constructed of aluminum and stainless steel, they resist the destructive forces of corrosion. Features: Thick walled hard coated aluminum body with double rolled-in construction. Ground and polished 303 stainless steel piston rod with wrench flats standard. Piston rod is threaded, sealed and machine staked to piston. Aluminum alloy end caps. Buna-N U-cup piston and rod seals. Oil impregnated sintered bronze rod guide bushing standard on all models. Rear Pivot bushing. Maximum Operating Pressure: 250 PSI. Operating Temperature Range: -20F to 200F. Bumpers: Optional bumpers do not affect external dimensions.
Double-Acting American Cylinder DV Series

Bore Sizes: 3/4, 1-1/8, 1-1/2, 2, 2-1/2. Options: Bumpers, Viton Seals, Ports Rotated 90. Dimensions: page 671 Accessories: page 631
Double-Acting American Cylinder DV Series

Catalog Part No. C1ZZ47 American Cylinder Model 1125DV-2.00 Mounting Style Universal Mount Bore Rod Dia Stroke Dia (in) (in) (in) 1-1/8 2.00 0.375 Ports 1/8 NPT Options None Accessories (Order Separately) M41 Foot Bracket (2) M45 Mounting Nut (2) M44 Rod Clevis & Pin M43 Pivot Bracket & Pin M41 Foot Bracket (2) M45 Mounting Nut (2) M44 Rod Clevis & Pin M43 Pivot Bracket & Pin Wt. 0.58 Price Each
C1HC92
1125DV-5.00
Universal Mount
1-1/8
5.00
0.375
1/8 NPT
None
0.73
630
Pneumatic Cylinders
American Cylinder 76 Series Aluminum Barrel
American Cylinder 76 Series Cylinder Accessories

Catalog Part No. C1ZX58 C1EU88 American Cylinder Model M44 M43 Description Rod Clevis & Pin for 1-1/8 Bore Cylinders Pivot Mount & Pin for 1-1/8 Bore Cylinders Wt. 0.10 0.22 Price Each
Dimensions: page 672
Fluid Conveying
631
Pneumatic Cylinders
Aro Silverair Series Stainless Steel Barrel
1/2 to 2-1/2 Inch Bore Stainless Steel Barrel Aro Silverair Series
Aro Silverair round cylinders are designed for applications where a disposable, light duty cylinder is preferred. Prelubed, they're suitable for operations without externally applied lubrication. Constructed of stainless steel and aluminum, they stand up to the attack of corrosive environments. Features: Drawn & polished 304 stainless steel barrel. Centerless ground & polished 303 stainless steel piston rod. Full-ported lightweight aluminum heads. Roll formed piston rod threads. U-cup piston seals. Oil-permeated bronze rod bushing (except 1/2 inch size, where front head is hard anodized). High tensile alloy return springs (single acting models). Buna-N seals are standard (Viton is available). Prelubricated. Magnetic pistons are available (Not for 1/2 inch size, not for single acting models). Maximum Operating Pressure: 200 PSI. Operating Temperature Range: -40F to 160F. Bumpers: Optional bumpers do not affect external dimensions. Not available with magnetic piston option. Piston Wear Strip: Piston Wear Strip is optional for most models. Is standard on models with 5 inches or more stroke if double acting nose mount, universal mount or block front mount. Is standard on models with 3 inches or more stroke if single acting spring extended.
Fluid Conveying
Double-Acting Aro Silverair Series

Bore Sizes: 1/2, 3/4, 1-1/16, 1-1/4, 1-1/2, 2, 2-1/2. Options: Bumpers, Viton Seals, Internal Magnet. Piston Wear Strip: Not available on 1/2 inch bore. Standard on models with 5 inches or more stroke. Note: No rod bushing on 1/2 inch models (front head is hard anodized). Dimensions: page 675 Accessories: page 633 Double-Acting Aro Silverair Series
Catalog Part No. Aro Model Bore Rod Mounting Dia Stroke Dia Style (in) (in) (in) Nose Mount 1-1/2 1.50 0.4375 Ports Options Accessories (Order Separately) *Items Included with Cyl 118108-14 L-Mount Bracket (1) *118109-14 Mounting Nut (Included) 118108-20 L-Mount Bracket (2) 118109-20 Mounting Nut (Not Included) 117555-17 Rod Clevis & Pin 117523-20 Pivot Bracket & Pin Wt. 0.79 Price Each
C1FR20 BQ-1280 SD15-NA01-014
0.75 Rod 1/8 Extension, NPT 0.15 Hole in Rod 1/4 NPT None
C1EN71
sd20-p4b4-060
Universal Mount
6.00
0.625
2.55
632
Pneumatic Cylinders
Aro Silverair Series Stainless Steel Barrel
Aro Silverair Series Cylinder Accessories

Catalog Part No. C1ES36 Aro Model 117555-17 Description Rod Clevis & Pin Kit for 1-3/4, 2, and 2-1/2 Bore Cylinders Wt. 0.21 Price Each
Materials: Bright zinc plated steel. Dimensions: page 676
Fluid Conveying
633
Pneumatic Cylinders
American Cylinder Stainless Steel Series Stainless Steel Barrel
7/16 to 1-1/2 Inch Bore Stainless Steel Barrel American Cylinder Stainless Steel Series
American Cylinder Stainless Steel Series cylinders are designed for applications where a disposable, light duty cylinder is preferred. Prelubed, they're suitable for operations without externally applied lubrication (Factory does recommend periodic direct lubrication or continuous air line mist lubrication for maximum service life). Constructed of aluminum and stainless steel, they resist the destructive forces of corrosion. Features: Type 304 stainless steel body with double rolled-in construction. Ground and polished 303 stainless steel piston rod with wrench flats standard (7/16 and 9/16 bore rods do not have flats). Piston rod is threaded, sealed and machine staked to piston. Aluminum alloy end caps. Buna-N U-cup piston and rod seals. Oil impregnated sintered bronze rod guide bushing standard on all models. Optional rear pivot bushing. Maximum Operating Pressure: 250 PSI. Operating Temperature Range: -20F to 200F with standard Buna-N seals. Optional Viton (fluorocarbon) seals are available for operating temperatures to 400F. Bumpers: Optional bumpers affect overall length: 9/16 bore add 0.125 inches. 1-1/16 bore add 0.125 inches. 1-1/2 bore add 0.125 inches.
Fluid Conveying
Double-Acting American Cylinder DVS & DNS Series

Bore Sizes: 7/16, 9/16, 3/4, 1-1/16, 1-1/4, 1-1/2. Options: Viton Seals, Bumpers, Ports Rotated 90, 1/8 inch Additional Rod Extension (standard option for 1-1/16 bore only), Rear Pivot Bushing, Unmilled Threaded Rear Mounting Stud. Dimensions: page 673 Double-Acting American Cylinder DVS & DNS Series
Catalog Part No. C1FR11 American Cylinder Model 1062DVS-3.00 Mounting Style Universal Mount Bore Rod Dia Stroke Dia (in) (in) (in) 1-1/16 3.00 0.25 Ports 1/8 NPT Options Accessories (Order Separately) M25 Mounting Nut M24 Rod Clevis M23S Pivot Bracket M21 Foot Bracket M25 Mounting Nut M24 Rod Clevis M23S Pivot Bracket M21 Foot Bracket Wt. 0.49 Price Each
C1GC69
1062DVS-4.00
Universal Mount
1-1/16 4.00
0.25
1/8 NPT
0.54
634
Pneumatic Cylinders
Aro Economair Series Medium To Heavy Duty Repairable
1-1/8 to 4 Inch Bore Double-Acting Aro Economair Series

Economair round cylinders are medium to heavy duty units that are repairable. Prelubed, they're suitable for operation without externally applied lubrication. Unique endcap retention design provides a concentric assembly, resulting in a service life superior to tie rod cylinder construction. Features: Cylinder heads are high tensile strength aluminum alloy retained by a feed ring wire. Barrel I.D. is hard-coated aluminum with a Rockwell C60 hardness and 16 microinch or better finish. Piston rod is ground and polished, hard chrome plated steel. High grade, self-lubricating bronze rod bearing. Wear compensating rod wiper. Bore Sizes: 1-1/8, 1-1/2, 2, 2-1/2, 3, 4. Options: Adjustable Cushions, Magnetic Piston, Viton Seals, Low Friction Seals, Lip Seals, 303 Stainless Steel Rod. Maximum Operating Pressure: 200 PSI. Operating Temperature Range: 0F to 180F. Dimensions: page 677 1-1/8 to 4 Inch Bore Double-Acting Aro Economair Series
Catalog Part No. Aro Model Rod Bore Stroke Dia (in) (in) (in) Rear Packing Cushions Tang Type Ports Options Accessories (Order Separately) Wt. Price Each
Fluid Conveying
C1BF77
2415-1089-400
1-1/2 40.00
0.50
Both Ends
Yes
Nitrile O-Ring
20534 L-Mount Bracket (2) 20530 Mounting Nut (2) 303 20538 Flange Mount Stainles 20542 Alum. Rod Clevis s Rod 115906 Steel Rod Clevis 20547 Clevis Bracket 20556 Trunnion
6.08
Note: Every Economair cylinder includes a rod nut.
635
Pneumatic Valves & Accessories

Hydraulic Power & Control Category Page Note: Valves that can be used for both Pneumatic & Hydraulic service (certain Ball Valves, Check Valves, Flow Control Valves, Needle Valves & Plug Valves) are located in the Hydraulic Power & Control section. See the alphabetical list on page 165 Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Manually Operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 200 Series 2-Way & 3-Way To 7.5 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 460 Series 2-Way & 3-Way To 7.5 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 50 Series 3-Way & 4-Way To 16 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro E Series 3-Way & 4-Way To 26 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics L2 Inline 4-Way To 79 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Pilot Operated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Alpha Series (Body Ported) 4-Way To 61 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Solenoid Operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro CAT Series 3-Way NC & NO To 6.9 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics 92280 Inline 4-Way To 17.7 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics L01 Inline 4-Way To 9.3 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Alpha Series (Body Ported) 4-Way To 61 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numatics L2 Inline 4-Way To 79 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro MaxAir Series 4-Way To 167 SCFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drain Cocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flow Control Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Inline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Valve Exhaust Port Mufflers & Speed Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Information, Performance, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 100 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Manually Operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 460 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 50 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro E Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Mechanically Operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 50 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Pilot Operated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro 200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Alpha Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Directional - Solenoid Operated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro CAT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Alpha Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro MaxAir Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aro Sierra 18 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637 638 638 638 639 640 641 642 642 643 643 644 644 645 646 647 649 650 650 651 652 679 679 679 680 680 680 681 682 683 684 684 685 685 686 687 687 687 688 688
Fluid Conveying
636

Ball Valves
Brass Bonomi 383N - 383M Series
Features: Blow out proof stem. Brass body, ball and stem. PTFE seats. Buna-N seal. Nylon handle with steel screw. Maximum Operating Pressure: 450 PSI WOG. Maximum Operating Temperature: 200F. Brass Bonomi 383N - 383M Series
Catalog Part No. C1HZ54 C1HZ55 Bonomi Model 383N-4 383N-6 Ports 1/8 NPT Female x Female 1/4 NPT Female x Female 3/8 NPT Female x Female 1/2 NPT Female x Female 3/4 NPT Female x Female Ball Orifice Dia. 0.31 0.31 0.31 0.39 0.47 Handle Color Black Black Black Black Black Wt. 0.25 0.20 0.17 0.28 0.49 Price Each
C1HZ53 383N-2
C1HZ56 383N-8 C1HZ52 383N-12
637

Manually-Operated Directional Valves
3-Way Manually Operated Pneumatic Valves Aro 200 Series To 7.5 SCFM
Features: Mounting holes are standard 1 inch electrical centers. Durable valve body. Application: Valves are multipurpose and can be plumbed to perform as normally closed, normally open, selector or any 2-way function. Available with 1/8 NPT ports or instant tube fitting ports for use with 5/32 nylon tubing. Actuators: Fingertip Lever, Retained Toggle, Panel Button. Materials: Die-cast zinc body. Stainless steel Teflon coated spool. Viton o-rings and Buna-N static seals. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: 30 to 150 PSIG. Operating Temperature Range: 32F to 160F. Lubrication: Not required. Dimensions: page 680
Fluid Conveying
3-Way Manually Operated Pneumatic Valves Aro 200 Series To 7.5 SCFM
Catalog Part No. Aro Model Actuator Type Retained Toggle Ports Valve Type Flow Rating CV Rating 0.195 Actuating Force (100 PSI) 24 oz. Actuating Travel (in) 70 Total Travel (in) -Wt. 0.26 Price Each
C1BC98 223-C
1/8 NPT Multipurpose 7.5 SCFM
3-Way Palm Button Pneumatic Valves Aro 460 Series To 7.5 SCFM
Features: 2-1/2 inch buttons are available in four colors. Button Guard is available (20975). Available with 1/8 NPT threaded ports or 5/32 tube fittings. Application: Valves are multipurpose and can be plumbed to perform as normally closed, normally open, selector or any 2-way function. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: 30 to 150 PSIG. Operating Temperature Range: 32F to 160F. Lubrication: Not required. Dimensions: page 680
3-Way Palm Button Pneumatic Valves Aro 460 Series To 7.5 SCFM
Catalog Part No. Aro Model Ports 1/8 NPT Valve Type Multipurpose Flow Rating 7.5 SCFM CV Actuating Actuating Rating Force Travel (in) 0.195 3 lbs. 0.078 Wt. 0.36 Price Each
C1BQ63 460-1
638

3-Way & 4-Way Manually Operated Pneumatic Valves Aro 50 Series 16 SCFM
Features: Compact size. Application: Low to moderate flow applications requiring manual valve operation. Actuators: Hand Lever, Palm Button, Manual Bleed. Materials: Extruded aluminum body. Steel spool (Hand Lever and Palm Button). Aluminum spool (Manual Bleed). Buna-N spool seals. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: 20-150 PSI. Operating Temperature Range: -10F to 180F. Lubrication: Valves use O-ring seals. For maximum performance and life expectancy, standard air line lubrication should be used. Dimensions: page 681
3-Way & 4-Way Manually Operated Pneumatic Valves Aro 50 Series 16 SCFM
Catalog Part No. Aro Model Actuator Type Hand Lever Valve Type 3-way 2-position Spool Action Manual Return Ports 1/8 NPT (Side) Flow Rating 16 SCFM CV Rating 0.43 Wt. 0.49 Price Each
C1BS29 5030-10
639

3-Way & 4-Way Manually Operated Pneumatic Valves Aro E Series 26 SCFM
Features: Low profile. Application: Moderate flow applications requiring manual valve operation. Actuators: Hand Lever, Palm Button, Pedal, Treadle, Manual Bleed. Materials: Extruded aluminum body. Buna-N spool seals. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: 20-150 PSI. Operating Temperature Range: -10F to 180F. Lubrication: Valves use O-ring seals. For maximum performance and life expectancy, standard air line lubrication should be used. Dimensions: page 682
Fluid Conveying
3-Way & 4-Way Manually Operated Pneumatic Valves Aro E Series 26 SCFM
Catalog Part No. Aro Model Actuator Type Hand Lever Pedal Hand Lever Valve Type 4-way 2-position 4-way 2-position 4-way 3-position Spool Action Manual Return Spring Return Spring Centered Ports 1/4 NPT (Side) 1/4 NPT (Side) 1/4 NPT (Side) Flow Rating 26 SCFM 26 SCFM 26 SCFM CV Rating 0.70 0.70 0.70 Wt. 0.92 1.72 1.17 Price Each
C1CN80 E212LM C1CN79 E212FS
C1CN84 E312LS
640

4-Way Manually Operated Pneumatic Valves Numatics L2 Series To 79 SCFM

Features: Solenoid air pilot or air pilot actuated. Hand-lever valves available. DIN plug-in solenoid and plug connector with indicator light. In-line or manifold mounted. Integral speed control available. Operating Pressure Range: 28" Hg Vacuum to 150 PSIG Shift Pressure: 14.5 to 150 PSIG Operating Temperature Range: -10F to +115F Lubrication: Unlubricated or lubricated service. Dimensions: page 689
4-Way Manually Operated Pneumatic Valves Numatics L2 Series To 79 SCFM

Catalog Part No. C1LC66 C1LC67 Numatics Model L22LA452O000000 L22LD452O000000 Valve Type Hand Lever Hand Lever Spool Action Spring Return Detent Ports 1/4 1/4 Flow Rating 79 SCFM 79 SCFM CV Rating 1.7 1.7 Wt. Price Each
641

Pilot-Operated Directional Valves
4-Way Pilot Operated Pneumatic Valves Aro Alpha Series (Body Ported) To 61 SCFM
Features: Compact space saving design. Ports have ISO identification. Large air passages result in high flow capability. Fast signal response times (14ms Double Pilot, 19ms Single Pilot On, 26ms Single Pilot Off). Application: For stand alone or remote valve applications. Materials: Zinc body. Urethane and Viton bonded precision ground spools. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: Vacuum to 150 PSI. Operating Temperature Range: 0F to 180F. Lubrication: Not required. Dimensions: page 686
4-Way Pilot Operated Pneumatic Valves Aro Alpha Series (Body Ported) To 61 SCFM
Catalog Part No. Aro Model Valve Type 4-way 2-position Spool Action Spring Return Ports 1/4 NPT (Side) Flow Rating 50 SCFM CV Rating 1.5 Minimum Pilot Pressure Spool Material 50 PSI Urethane Wt. 0.80 Price Each
C1CH13 A212PS
Fluid Conveying
642

Solenoid-Operated Directional Valves
3-Way Solenoid Operated Pneumatic Valves Aro CAT Series To 6.9 SCFM
Features: Compact design. Quick change coil can be oriented in 4 directions. Application: Low flow applications for air or inert gas. Higher flow models use 30mm coil and 30mm coil connectors. Plugging the exhaust port with optional 59632-1 (10-32 thread) plug allows 3-way normally closed valve to be used as 2-way normally closed. Materials: Aluminum body. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: 0 to 150 PSI. Operating Temperature Range: 0F to 122F. Coils: Coils are UL-listed and comply with CSA standards. AC and DC coils are interchangeable on the same solenoid stem. Note: High Flow models use 30mm coil and 30mm coil connectors. UL File #MH13513, CSA File #LR51090. Class F coils are rated for 100% duty cycle. Coil connectors meet Nema 4 classification. Lubrication: Not required. Dimensions: page 687
3-Way Solenoid Operated Pneumatic Valves Aro CAT Series To 6.9 SCFM
Catalog Part No. Aro Model Valve Type 3-way 2-position Normally Closed 3-way 2-position Normally Open Ports Flow Rating CV Rating Coil Body Style Ported Ported Wt. 0.13 0.20 Price Each
Fluid Conveying
C1CN26 CAT33P-000-N C1CN27 CAT44P-000-N
1/8 NPT (Side) 2.2 SCFM 1/8 NPT (Side) 2 SCFM
None. Select (1) from 0.062 table below. 0.056 None. Select (1) from table below.
Coils & Solenoid Connectors for Aro CAT Series Solenoid Valves
Catalog Part No. C1AJ12 C1AJ13 C1AJ14 C1AJ15 C1AJ17 C1AJ18 C1AJ19 Part Number 116218-33 116218-35 116218-38 116218-39 116647-33 116647-38 116647-39 Description Coil, 120VAC, 22mm. Requires a 22mm solenoid connector. Coil, 240VAC, 22mm. Requires a 22mm solenoid connector. Coil, 24VAC/12VDC, 22mm. Requires a 22mm solenoid connector. Coil, 24VDC, 22mm. Requires a 22mm solenoid connector. Coil, 120VAC, 22mm. 18 inch molded lead wires. No solenoid connector required. Coil, 24VAC/12VDC, 22mm. 18 inch molded lead wires. No solenoid connector required. Coil, 24VDC, 22mm. 18 inch molded lead wires. No solenoid connector required. Solenoid Connector, 22mm, 1/2 inch conduit, without light or lead wires. Solenoid Connector, 22mm, 1/2 inch conduit, without light, with 18 inch lead wires. Solenoid Connector, 22mm, Strain Relief, without light or cable, cable opening 0.3937 inches. Straight 30mm Solenoid Connector with 36 inch molded cable Wt. 0.15 0.11 0.15 0.15 0.13 0.20 0.14 0.05 0.10 0.05 0.22 Price Each
C1CN28 CDN C1CN29 CDW C1CN43 CSN C1FJ22 CHW-30
643

4-Way Solenoid Operated Pneumatic Valves Numatics 92280 Series To 17.7 SCFM
Features: Reliability: steel spool & sleeve technlogy with long service life. Suitable for repeatable applications, e.g. demanding gluing applications or in sorting systems. Robust valve design, particularly recommended for use in high-temperature or dirty environments. Materials: Body: Aluminium, anodized, painted grey. Internal parts: Stainless steel, polyacetal, aluminium. Seals: NBR (nitrile). Response Time: < 6 ms (ON), < 6 ms (OFF) Operating Pressure Range: 39 to 101 PSI Fluids: Air or neutral gas, filtered, lubricated or not. Operating Temperature Range: -13 F to 194 F Dimensions: page 690
4-Way Solenoid Operated Pneumatic Valves Numatics 92280 Series To 17.7 SCFM
Catalog Part No. C1LB59 Numatics Model 92280-2 Valve Type Spring return, flush non-locking override Ports 1,2,4 1/4 Exhaust Ports 1/8 Flow Rating 17.7 SCFM CV Rating 0.47 Coil 24 VDC Wt. Price Each
Fluid Conveying
Parts for 92280 Series Valves

Catalog Part No. C1LC72 Part Number Description Wt. Price Each
ND0315FBN00000 DIN connector, attached cable, 15 foot, 22 AWG wire 00
4-Way Solenoid Operated Pneumatic Valves Numatics L01 Series To 9.3 SCFM
Features: Direct solenoid actuated. DIN plug-in solenoid with indicator light available. Integral speed control available. In-line or manifold mounted. Designed to meet the requirements of NEMA 4 / IP65. Operating Pressure Range: 28" Hg to 150 PSIG Lubrication: Unlubricated or lubricated service Dimensions: page 691
4-Way Solenoid Operated Pneumatic Valves Numatics L01 Series To 9.3 SCFM
Catalog Part No. C1LC59 C1LC58 Numatics Model Valve Type Ports 1/8 1/8 Flow Rating 9.3 SCFM 9.3 SCFM CV Rating 0.20 0.20 Coil 24 VDC 110-120/50-60 VAC Wt. Price Each
L01SA4594000061 Single Direct Solenoid, Spring Return W/Flush Non-locking Override L01SA4592000030 Single Direct Solenoid, Spring Return W/Flush Non-locking Override
644

Parts for L01 Series Valves
Catalog Part No. C1LB20 C1LB21 Part Number 230-365 230-366 DIN 43650 connector with 24 V Light DIN 43650 connector with 110 V Light Description Wt. Price Each
4-Way Solenoid Operated Pneumatic Valves Aro Alpha Series (Body Ported) To 61 SCFM
Features: Compact space saving design. Ports have ISO identification. Large air passages result in high flow capability. Fast signal response times (20ms Double Solenoid, 22ms Single Solenoid Energize, 27ms Single Solenoid De-energize). High Cycle Rate of 600 cycles per minute. Application: For stand alone or remote valve applications. Optional external solenoid supply plug kit (119306) allows valve to be used in vacuum and low pressure applications (Contact us for details). Materials: Zinc body. Urethane and Viton bonded precision ground spools. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: Vacuum to 150 PSI. Minimum Shift Pressure: 50 PSI (Single Solenoid), 20 PSI (Double Solenoid). Operating Temperature Range: 0F to 180F. Coils: Coils are UL-listed and comply with CSA standards. AC and DC coils are interchangeable on the same solenoid stem. UL File #MH13513, CSA File #LR51090. Class F coils are rated for 100% duty cycle. Coil connectors meet Nema 4 classification. Filtration: 40 micron recommended. Lubrication: Not required. Dimensions: page 687
4-Way Solenoid Operated Pneumatic Valves Aro Alpha Series (Body Ported) To 61 SCFM
Catalog Part No. Aro Model Valve Type Spool Action 4-way 2-position 4-way 2-position Solenoid Return Spring Return Ports 1/4 NPT (Side) 1/4 NPT (Side) Flow Rating 50 SCFM 50 SCFM CV Rating 1.5 1.5 Spool Material Coil(s) Wt. 0.80 0.80 Price Each None. Select (2) Urethane from table below. None. Select (1) Urethane from table below.
C1CH14 A212SD-000-N C1CH15 A212SS-000-N
Coils & Solenoid Connectors for Aro Alpha Series Solenoid Valves
Catalog Part No. C1AJ12 C1AJ13 C1AJ14 C1AJ15 C1AJ17 C1AJ18 C1AJ19 Part Number 116218-33 116218-35 116218-38 116218-39 116647-33 116647-38 116647-39 Description Coil, 120VAC, 22mm. Requires a 22mm solenoid connector. Coil, 240VAC, 22mm. Requires a 22mm solenoid connector. Coil, 24VAC/12VDC, 22mm. Requires a 22mm solenoid connector. Coil, 24VDC, 22mm. Requires a 22mm solenoid connector. Coil, 120VAC, 22mm. 18 inch molded lead wires. No solenoid connector required. Coil, 24VAC/12VDC, 22mm. 18 inch molded lead wires. No solenoid connector required. Coil, 24VDC, 22mm. 18 inch molded lead wires. No solenoid connector required. Solenoid Connector, 22mm, 1/2 inch conduit, without light or lead wires. Solenoid Connector, 22mm, 1/2 inch conduit, without light, with 18 inch lead wires. Wt. 0.15 0.11 0.15 0.15 0.13 0.20 0.14 0.05 0.10 Price Each
C1CN28 CDN C1CN29 CDW
645


Coils & Solenoid Connectors for Aro Alpha Series Solenoid Valves
Catalog Part No. Part Number Description Solenoid Connector, 22mm, Strain Relief, without light or cable, cable opening 0.3937 inches. "A" Spool Kit, for models A2XXPS, A2XXSS-XXX-X, A2XXSS-XXX-L. Includes spool assy, o-rings, retaining rings and spring. "A" Spool Kit, for models A4XXPS, A4XXSS-XXX-X, A4XXSS-XXX-L. Includes spool assy, o-rings, retaining rings and spring. Wt. 0.05 0.11 0.15 Price Each
C1CN43 CSN C1ZU43 118597-2 C1AJ22 118598-4
Fluid Conveying
4-Way Solenoid Operated Pneumatic Valves Numatics L2 Series To 79 SCFM

Features: Solenoid air pilot or air pilot actuated. Hand-lever valves available. DIN plug-in solenoid and plug connector with indicator light. In-line or manifold mounted. Integral speed control available. Operating Pressure Range: 28" Hg Vacuum to 150 PSIG Shift Pressure: 14.5 to 150 PSIG Operating Temperature Range: -10F to +115F Lubrication: Unlubricated or lubricated service. Dimensions: page 692
646

4-Way Solenoid Operated Pneumatic Valves Numatics L2 Series To 79 SCFM
Catalog Part No. C1LC61 C1LC62 C1LC63 C1LC64 Numatics Model L22BA452B000061 L22BA452O000030 L22BB452B000061 L22BB452O000030 Valve Type Single Solenoid Air Pilot Single Solenoid Air Pilot Double Solenoid Air Pilot Double Solenoid Air Pilot Spool Action Spring Return w/Flush Locking Override Spring Return w/Flush Locking Override Detent w/Flush Locking Override Detent w/Flush Locking Override Voltage 24 VDC 110 VAC 24 VDC 110 VAC Ports 1/4 1/4 1/4 1/4 Flow Rating 79 SCFM 79 SCFM 79 SCFM 79 SCFM CV Rating 1.7 1.7 1.7 1.7 Wt. Price Each
Hydraulic Power & Control Pneumatic Power & Control
Parts for L2 Series Valves

Catalog Part No. C1LB20 C1LB21 Part Number 230-365 230-366 DIN 43650 connector with 24 V Light DIN 43650 connector with 110 V Light Description Wt. Price Each
4-Way Solenoid Operated Pneumatic Valves Aro MaxAir Series To 167 SCFM
Features: Compact size with excellent flow capability. Standard Manual Override. Body can be directly plumbed or manifold mounted. Meets NEMA-4 classification. Application: Ideal for packaging, material handling and air motor applications. Materials: Aluminum body. Buna-N seals. Flow Rating: Based on 100 PSIG input and 85 PSIG output. Operating Pressure Range: 45 to 115 PSI. Minimum Shift Pressure: Single Solenoid Spring Return: 45 PSI. Double Solenoid 2 Position: 20 PSI. Double Solenoid 3 Position Spring Centered: 45 PSI. Operating Temperature Range: 15F to 122F. Coils: Coils are Class F rated for 100% duty cycle applications at 122F. AC or DC coils can be interchanged on the same solenoid stem. Each solenoid connector acts as it's own junction box, with molded connectors and gaskets. Coil connectors meet Nema 4 classification. Lubrication: Not required. Dimensions: page 688
4-Way Solenoid Operated Pneumatic Valves Aro MaxAir Series To 167 SCFM Indexes & Technical Information
Catalog Part No. Aro Model Valve Type 4-way 2-position 4-way 2-position Spool Action Spring Return Spring Return Ports 1/4 NPT (Side) Flow Rating 26 SCFM CV Rating 0.70 4.32 Coil(s) None. Select (1) from table below. None. Select (1) from table below. Wt. 0.43 1.31 Price Each
C1EK66 M212SS-000-N C1ZU69 M214SS-000-N
1/2 NPT 167 SCFM (Side)
Coils, Solenoid Connectors and Manifolds for Aro MaxAir Series Solenoid Valves
Catalog Part No. C1AJ12 C1AJ13 Part Number 116218-33 116218-35 Description Coil, 120VAC, 22mm. Requires a 22mm solenoid connector. Coil, 240VAC, 22mm. Requires a 22mm solenoid connector.
Wt. 0.15 0.11
Price Each
647


Coils, Solenoid Connectors and Manifolds for Aro MaxAir Series Solenoid Valves
Catalog Part No. C1AJ14 C1AJ15 C1AJ17 C1AJ18 C1AJ19 Part Number 116218-38 116218-39 116647-33 116647-38 116647-39 Description Coil, 24VAC/12VDC, 22mm. Requires a 22mm solenoid connector. Coil, 24VDC, 22mm. Requires a 22mm solenoid connector. Coil, 120VAC, 22mm. 18 inch molded lead wires. No solenoid connector required. Coil, 24VAC/12VDC, 22mm. 18 inch molded lead wires. No solenoid connector required. Coil, 24VDC, 22mm. 18 inch molded lead wires. No solenoid connector required. Solenoid Connector, 22mm, 1/2 inch conduit, without light or lead wires. Solenoid Connector, 22mm, 1/2 inch conduit, without light, with 18 inch lead wires. Solenoid Connector, 22mm, Strain Relief, without light or cable, cable opening 0.3937 inches. Wt. 0.15 0.15 0.13 0.20 0.14 0.05 0.10 0.05 Price Each
C1CN28 CDN C1CN29 CDW
C1CN43 CSN
Fluid Conveying
648

Drain Cocks
External Seat Drain Cocks
Materials: Brass. External Seat Drain Cocks

Catalog Part No. Price Each
Model Number
Size 1/8 1/4 3/8
Threads 1/8 NPT 1/4 NPT 3/8 NPT
X Closed (in) 0.88 1.00 1.25
Y (in) 1.12 1.38 1.50
Wt. 0.01 0.11 0.08
C1AU58 2014X2 C1AU59 2014X4 C1AU60 2014X6
649

Flow Control Valves
Right Angle Flow Control Valves For Pneumatic Service
Fluid Conveying
Features: 360 swivel eases tube alignment. Pre applied thread sealant eliminates Teflon taping. Threaded or instant tube fitting inlets. Application: Controlled flow in one direction, free flow in opposite direction. Materials: Nickel plated brass body, black anodized aluminum swivel, stainless steel spring and Buna-N seals. Maximum Operating Pressure: 200 PSI. Operating Temperature Range: 0F to 200F. Right Angle Flow Control Valves For Pneumatic Service
Catalog Part No. C1AJ29 C1AJ33 Aro Model 119307-125 119309-250 Adjustment Type Slotted Slotted Ports 1/8 NPT Male x 1/8 NPT Female 1/4 NPT Male x 1/4 Tubing Flow Rating 17 SCFM 34 SCFM A (in) H (in) E (in) Wt. 0.13 0.15 Price Each
1.27 0.59 1.05 1.61 0.75 1.30
650

Flow Control Valves
Inline Flow Control Valves For Pneumatic Service
Features: Four stage tapered needle design provides infinite control settings. Composite body is tough and corrosion resistant. Color-coded micrometer & calibrated adjustment knob provide instant reference points for repeat settings. Press red locking ring down to prevent adjustment. Tamper resistant wire supplied in package. Units are threaded for easy panel mounting. Application: Controlled flow in one direction, free flow in opposite direction. Maximum Operating Pressure: 200 PSI. Operating Temperature Range: 0 to 200F. Inline Flow Control Valves For Pneumatic Service
Catalog Part No. A Flow Rating (in) 15 SCFM 25 SCFM 55 SCFM B (in) C (in) D (in) E (in) Price Each
Fluid Conveying
Aro Model
Size 1/8 1/4 3/8
Threads 1/8-27 NPT 1/4-18 NPT 3/8-18 NPT
F (in) 1-20 UNEF-2A 1-20 UNEF-2A 1-3/16-18 UNEF-2A
Wt. 0.25 0.15 0.41
C1AH38 104104-F01 C1AH39 104104-F02 C1AH40 104104-F03
0.94 1.34 2.83 0.94 1.91 0.94 1.34 2.83 0.94 1.91 1.31 1.69 3.86 1.31 2.84
Panel Mounting Nuts for Aro 104104 Series Flow Control Valves
Catalog Part No. Part Number Description Panel Mounting Nut for 3/8, 1/2 and 3/4 size valves. Wt. 0.03 Price Each
C1AH37 104094
651

Air Valve Mufflers & Speed Controls
Porous Metal Mufflers

Features: Effective for muffling of air valve noise and for exhaust and intake filtering. Tough, cellular sintered metal structure, securely brazed to metal ferrule, zinc plated steel body (Allied Witan Models). Sintered bronze structure construction with brass body (Aro Models). Porous Metal Mufflers
Catalog Allied Witan Part No. Model C1AX88 20312-1 C1DG35 P28 Note: 20312 is Aro model. Body Material Brass Thread O.A. Size Length (in) Hex (in) Wt. 1/8 NPT 1.125 1.20 0.44 0.56 0.02 0.04 Price Each
Zinc Plated Steel 1/4 NPT
Heavy Duty Metal Mufflers

Features: Constructed of corrosion resistant metal to withstand shock and continuous heavy duty use. Softly disperses exhaust air uniformly over a 360 pattern. Heavy Duty Metal Mufflers
Catalog Part No. C1CL40 Allied Witan Model B28 O.A. Length (in) 1.75 Price Each
Fluid Conveying
Thread Size 1/4 NPT
Hex (in) 0.56
Wt. 0.05
Adjustable Speed Controls

Miscellaneous Products Features: Controls air flow on exhaust ports of air valves. Sintered bronze construction with brass body. Adjustment screw with lock nut. Adjustable Speed Controls
Catalog Part No. Aro Model Thread Size 1/4 NPT O.A. Length (in) 2.19 Hex (in) 0.55 Wt. 0.08 Price Each
C1AX89 20313-2
652

Air Valve Mufflers & Speed Controls
Porous Metal Mufflers with Adjustable Speed Control

Features: External adjustment screw accurately varies orifice opening from closed to full flow. Locknut to secure desired setting. Tough, cellular sintered metal structure, securely brazed to metal ferrule, zinc plated steel body. Porous Metal Mufflers with Adjustable Speed Control
Catalog Part No. Allied Witan Model Thread Size 1/4 NPT O.A. Length (in) 1.45 Hex (in) 0.56 Wt. 0.05 Price Each
C1CM32 C28
653
654
Air Line FRL's

Air Line FRL's - Flows to 1,770 SCFM at 250/300 PSI Aro Aro-Flo Series Sizes 1/8 to 3
Aro Aro-Flo Series
Series Description: 1000 Series: 1/8" and 1/4" Ports, Max flow: 59 scfm, Series size: Miniature. 1500 Series: 1/4" and 3/8" Ports, Max flow: 113 scfm, Series size: Compact 2000 Series: 3/8", 1/2", and 3/4" Ports, Max flow: 222 scfm, Series size: Standard 3000 Series: 3/4" and 1" Ports, Max flow: 368 scfm, Series size: Heavy-Duty Super-Duty Series: 1", 1-1/4", 1-1/2", 2" and 3" Ports, Max flow: 1,770 scfm, Series size: Super-Duty Filters: ARO-Flo compressed air filters are designed to remove airborne solid and liquid contaminants. Filters can be ordered with different elements, including coalescing models which are capable of removing oil aerosols and particles down to 0.3 micron. Standard filters are sold with 5-micron elements; 40-micron elements can be purchased and installed separately. Regulators: Air line regulators provide controlled, consistent air pressure as required for specific pneumatic equipment connected to the air system. All ARO-Flo regulators are offered with a standard adjustment range of 0 140 psig. Alternative spring ranges are offered for easy conversion to suit different requirements. Non-relieving regulators are offered for applications where the venting of downstream overpressure is undesirable. Lubricators: ARO-Flo mist-type lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life. They are designed to provide the correct amount of oil required for most general applications in a pneumatic system, delivering a constant ratio of oil to air flow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed close to the downstream application to ensure effective distribution of oil. Piggyback Filters/Regulators: Filter-regulators, or piggybacks, combine the functions of both a filter and regulator. Piggybacks are compact and most effective when space is a constraint. Piggybacks can be ordered with different filter elements and can be modified with different springs, depending on the filtration and air regulating requirements. Combinations: Filters, regulators, lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs. ARO-Flo combination FRLs are easily assembled using modular spacer kits. Installation: The filter, regulator and lubricator should be installed in that order. If a coalescing filter is required, it should be installed downstream from a standard filter. Individual take-off lines to the FRL and air tool or equipment should be from the top of the compressed air line. Make sure that air flow markings are followed for proper flow direction through the FRL units. To trap and expel water, sludge and other contaninants which may collect on the bottom of the air line, a drip leg drain should be used. Drip leg drains should be installed at low points in the piping system and at the far end of the distribution system.
655
Air Line FRL's

Air Line Filter/Regulator/Lubricator Combination Units Aro Aro-Flo Series
Air Line Filter/Regulator/Lubricator Combination Units Aro Aro-Flo Series

Catalog Part No. C1KL34 Flow Connection Aro Model Series Port Size Rating Type C38121-800 1000 1/4 NPT 46 scfm 61 scfm 99 scfm 150 scfm Filter Drain Type Bowl Type Polycabonate Components Dimensions F35121-400 R37121-600 L36121-100 F35221-400 R37221-600 L36221-100 F35331-401 R37331-600 L36331-100 F35341-401 R37341-600 R37341-600 4.72W x 5.17H 6.61W x 6.61H 8.69W x 7.67H 8.69W x 7.67H Wt. 1.35 Price Each
Modular with T-bracket wall Manual mount
C1KL35
C38221-800
1500
1/4 NPT
Modular with T-bracket wall Manual Polycabonate with Bowl Guard mount Modular with T-bracket wall mount Modular with T-bracket wall mount Auto Polycabonate with Bowl Guard Polycabonate with Bowl Guard
2.61
C1KG86 C38331-800
2000
3/8 NPT
4.91
Fluid Conveying
C1KG87 C38341-800
2000
1/2 NPT
Auto
4.83
Parts & Accessories for Aro Aro-flo Series FRL's

Catalog Part No. C1BJ99 Part Number 29665 Description Non-Detergent Lubricating Oil, 1 quart. 100-200 SSU @ 100F (Light SAE 10). Minimum aniline point of 200F. Wt. 2.00 Price Each
656
Air Line FRL's

Air Line Filters Aro Aro-Flo Series

Features: ARO-Flo compressed air filters are designed to remove airborne solid and liquid contaminants. Filters can be ordered with different elements, including coalescing models which are capable of removing oil aerosols and particles down to 0.3 micron. Standard filters are sold with 5-micron elements; 40-micron elements can be purchased and installed separately. Materials: 1000 through 3000 Series: Aluminum body, nylon bowl guard for polycarbonate bowls, brass + nitrile manual drain, acetal auto drain, polyethylene standard filter, hepa paper + felt coalescing filter, nitrile seals, acetal filter baffle. Maximum Inlet Pressure: 1000 through 3000 Series: Polycaronate Bowl 150 psi, Metal Bowl 250 psi. Super-duty Series: With pressure differential indicator 150 psig, Without pressure differential indicator 300 psig. Operating Temerature Range: 1000 through 3000 Series: Polycarbonate Bowl 23-125F, Metal Bowl 23-175F. Super-duty Series: 32-150F. Air Line Filters Aro Aro-Flo Series
Catalog Part No. Aro Model Flow Series Port Size Rating 1000 1500 2000 2000 2000 2000 3000 1/4 NPT 1/4 NPT 3/8 NPT 3/8 NPT 1/2 NPT 1/2 NPT 3/4 NPT 49 scfm 73 scfm 156 scfm 156 scfm 197 scfm 197 scfm 288 scfm Element 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron Drain Type Bowl Type Bowl Capacit Dimensions y 0.5 oz 1.2 oz 1.9 oz 2.4 oz 1.9 oz 2.4 oz 5.3 oz 1.58W x 4.30H 2.21W x 6.16H 2.76W x 7.05H 2.76W x 7.05H 2.76W x 7.05H 2.76W x 7.05H 3.54W x 9.93H Wt. 0.38 Price Each
C1KG89 F35121-400 C1KL47 C1KL48 C1KL49 C1KL50 C1KL51 C1KL52 F35221-400 F35331-400 F35331-410 F35341-400 F35341-410 F35451-420
Manual Polycabonate with Bowl Guard Manual Polycabonate with Bowl Guard Manual Polycabonate with Bowl Guard Manual Manual Manual Manual Metal with Sight Glass Polycabonate with Bowl Guard Metal with Sight Glass Metal
Fluid Conveying
0.69 1.00 1.77 1.40 1.70
3.17
657
Air Line FRL's

Air Line Regulators Aro Aro-Flo Series

Features: Air line regulators provide controlled, consistent air pressure as required for specific pneumatic equipment connected to the air system. All ARO-Flo regulators are offered with a standard adjustment range of 0 140 psig. Alternative spring ranges are offered for easy conversion to suit different requirements. Non-relieving regulators are offered for applications where the venting of downstream overpressure is undesirable. Materials: 1000 Series: Nitrile + acetal diaphragm, Aluminum body, Brass + nitrile valve, Steel springs, Nylon + polycarbonate gauge cover, Acetal knob, Nitrile o-rings. 1500 through 3000 Series: Nitrile + nylon diaphragm, Aluminum body, Nylon + nitrile valve, Steel springs, Nylon + polycarbonate gauge cover, Acetal knob, Nitrile o-rings. Maximum Inlet Pressure: 1000 through 3000 Series: 250 psi. Super-duty Series: 300 psig. Operating Temperature Range: 1000 through 3000 Series: 23-140 F. Super-duty Series: 32-150F. Gauge Port: 1000 through 3000 Series: 1/8 NPT. Super-duty Series: 1/4 NPT. Air Line Regulators Aro Aro-Flo Series
Catalog Part No. Aro Model Flow Series Port Size Rating 1000 1000 1500 2000 2000 2000 2000 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 3/8 NPT 1/2 NPT 1/2 NPT 45 scfm 59 scfm 86 scfm 179 scfm 179 scfm 215 scfm 215 scfm Type Relieving Relieving Relieving Relieving Relieving Relieving Relieving Spring Range 0-140 PSI 0-140 PSI 0-140 PSI 0-140 PSI 0-140 PSI 0-140 PSI 0-140 PSI Gauge Yes No No No Yes No Yes Dimensions 1.58W x 3.56H 1.58W x 3.56H 2.21W x 4.77H 2.78W x 5.47H 2.78W x 5.47H 2.78W x 5.47H 2.78W x 5.47H Wt. 0.54 0.53 0.85 1.47 1.42 1.40 1.45 Price Each
C1KH42 R37111-100
Fluid Conveying
C1KH43
R37121-100
C1KH44 R37221-100 C1KH45 R37331-100 C1KH46 R37331-600
C1KN14 R37341-100 C1KN15 R37341-600
Parts & Accessories for Aro Aro-flo Series Regulators

Catalog Part No. C1KH84 C1KJ70 Part Number 104408 29850 C-bracket mount for 1500 series Gauge, 0-160 psi, 1/8 NPT Description Wt. 0.15 0.10 Price Each
658
Air Line FRL's

Mounting Components Aro Module/Air 1000 Series
Mounting Components Aro Module/Air 1000 Series

Catalog Part No. Aro Model Description Wall Mounting Bracket. May be used to mount FRL combo units which include a regulator, Piggyback Filter Regulators or individual regulators. Panel Mounting Nut Wt. 0.08 0.03 Price Each
C1BK11 29668 C1AH37 104094
Air Line Piggyback Filter/Regulators Aro Aro-Flo Series

Features: Filter-regulators, or piggybacks, combine the functions of both a filter and regulator. Piggybacks are compact and most effective when space is a constraint. Piggybacks can be ordered with different filter elements and can be modified with different springs, depending on the filtration and air regulating requirements. Maximum Inlet Pressure: 1000 through 3000 Series: Polycaronate Bowl 150 psi, Metal Bowl 250 psi. Operating Temperature Range: 1000 through 3000 Series: Polycaronate Bowl 23-125 F, Metal Bowl 23-175 F. Gauge Port: 1/8 NPT.
Air Line Piggyback Filter/Regulators Aro Aro-Flo Series

Catalog Part No. Flow Aro Model Series Port Size Rating 1000 1000 1500 2000 1/4 NPT 1/4 NPT 1/4 NPT 1/2 NPT 47 scfm 47 scfm 72 scfm 172 scfm Filter Ele. 5 micron 5 micron 5 micron 5 micron Filter Drain Type Manual Manual Manual Manual Filter Bowl Type Reg. Type Reg. Spring Reg. Range Gauge 0-140 PSI 0-140 PSI No Yes Yes Yes Dim. 1.58W x 6.20H 1.58W x 6.20H 2.21W x 8.15H 2.78W x 9.96H Wt. 0.68 Price Each
C1KM86 P39124-100 C1KH39 P39124-600 C1KH40 P39224-600 C1KM87 P39344-600
Polycarbonate Relieving Polycarbonate Relieving
0.67 1.14 2.00
Polycabonate Relieving 0-140 PSI Polycarbonate Relieving 0-140 PSI
Parts & Accessories for Aro Aro-flo Series Piggyback Filter/Regulators

Catalog Part No. C1KJ70 Part Number 29850 Gauge, 0-160 psi, 1/8 NPT Description Wt. 0.10 Price Each
659
Air Line FRL's

Air Line Lubricators Aro Aro-Flo Series

Features: ARO-Flo mist-type lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life. They are designed to provide the correct amount of oil required for most general applications in a pneumatic system, delivering a constant ratio of oil to air flow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed close to the downstream application to ensure effective distribution of oil. Maximum Inlet Pressure: 1000 to 3000 Series: Aluminum body, nylon sight dome, urethane inlet tube, nitrile seals. Operating Temperature Range: 1000 through 3000 Series: Polycarbonate Bowl 150 psi, Metal Bowl 250 psi. Super-duty Series: Plastic Bowl 150 psig, Metal Bowl 200 psig. Gauge Port: 1000 through 3000 Series: Polycarbonate Bowl 23-125 F, Metal Bowl 23-175 F. Super-duty Series: Plastic Bowl 32-125 F, Metal Bowl 32-150 F. Air Line Lubricators Aro Aro-Flo Series
Catalog Part No. Aro Model Flow Series Port Size Rating 1000 2000 2000 1/4 NPT 3/8 NPT 1/2 NPT 57 scfm 85 scfm 156 scfm Bowl Type Polycabonate with Bowl Guard Polycabonate with Bowl Guard Polycabonate with Bowl Guard Fill Type Standard Standard Standard Dimensions 1.58W x 5.04H 2.76W x 7.09H 2.76W x 7.09H Wt. 0.46 1.49 1.44 Price Each
C1KM70 L36121-100 C1KM71 L36331-100 C1KH33 L36341-100
Fluid Conveying
Parts & Accessories for Aro Aro-flo Series Lubricators

Catalog Part No. C1KH84 C1BJ99 Part Number 104408 29665 C-bracket mount for 1500 series Non-Detergent Lubricating Oil, 1 quart. 100-200 SSU @ 100F (Light SAE 10). Minimum aniline point of 200F. Description Wt. 0.15 2.00 Price Each
660
Air Line FRL's

Air Line FRL's - Flows to 325 SCFM at 250 PSI Numatics FlexiBlok Series Sizes 1/8 to 1
Numatics FlexiBlok Series
Series Description: While most competitors require numerous additional parts to assemble FRL components, the Numatics FlexiBlok FRL products are easily assembled with 2 button head screws and an o-ring seal. This modular type design reduces the potential for leakage during assembly and lowers the overall cost since brackets or extra tools are not required. The FlexiBlok line is designed to be simple and economical Service can be performed while the component is installed in the air line. 22, 32 and 42 Series bowls feature a unique locking tab bowl. Just pull the locking tab down, turn the bowl 45, and pull down to remove. The unique design of the 22, 32 and 42 series bowls allows the o-ring to be held captive on the bowl, making it easy to check and replace if necessary. Differential pressure indicators are standard on all 22, 32 and 42 Series coalescers. Particulate filters feature a standard 5 micron element (optional 40 micron element). Coalescing filters feature dual support cores which prevent rupture and collapse. CircleVision bowls allow the machine operator or manager a clear visual indication of the liquid level in a filter or lubricator bowl from up to 40 feet away. Every product is tested and approved for quality assurance. 1. Shutoff Valve: Manual shutoff used to relieve downstream pressure for servicing or maintenance. Security hole provided for lockout capabilities. May also be used as a stand-alone unit. 2. Filter : Particulate Filter: 5 micron filtration (shown) used as a primary filter to remove water, dust, and debris from air line (40 micron optional). Water removal efficiency is greater than 90% at rated flow. Coalescing Filter: used as a secondary filter to remove up to 99.99% of oil and particles. Available with four different type elements - 0.01, .3, and .7 micron filtration and a vapor adsorbing element that utilizes activated carbon to deodorize compressed air. 3. Regulator : Reduces supply pressure to a required working pressure. Available in relieving or non-relieving styles and in four different pressure ratings. 4. Diverter Block: Provides total versatility; mounts directly inline to allow additional components to be manifolded without excessive pressure drop. 5. Lubricator: Designed to meter oil aerosols into the air stream where lubrication is required. Tamper-resistant adjustment knob eliminates unauthorized adjustments. 6. Solenoid Soft Start Quick Exhaust Valve: When solenoid air pilot is energized, adjustable flow control allows system to be pressurized slowly. When downstream pressure reaches approximately 60% of upstream pressure, slow start shifts to full flow condition. When solenoid air pilot is de-energized, downstream pressure exhausts to atmosphere. Equipped with manual override and lockout. 7. Pressure Switch: Allows for remote monitoring of system pressure. An adjustable, tamper-resistant knob resists unauthorized changes. 8. Bowls: Three types available: polycarbonate bowl with guard (standard), metal bowl with sight glass, and CircleVision - a metal bowl wrapped in polycarbonate, allowing a 360 view of liquid level in bowl. 9. Drains: Six types available: Manual drain with internal barb fitting (1/4" I.D.) for drain tube (standard), automatic float drain, flexible drain, external pulse drain, metal manual drain, and manual lever drain. All feature unique characteristics suitable for many different applications.
661
Air Line FRL's

Air Line Filters Numatics FlexiBlok Series

Features: Four convenient sizes. 5 micron sintered elements standard (40 micron optional). Can be installed as modular or individual unit. Includes screws and o-rings for modular connection. Manual or automatic drain. Materials: Polycarbonate bowl standard. Optional metal bowl with sight glass. Optional CircleVision sight bowl. Maximum Inlet Pressure: Polycarbonate Bowl: 150 psi, Metal Bowl: 200 psi. Operating Temperature Range: 40-120 F Air Line Filters Numatics FlexiBlok Series
Catalog Part No. C1LB66 C1LB67 C1LB68 C1LB69 C1LB70 C1LB71 C1LB72 C1LB73 C1LB74 C1LB75 C1LB76 C1LB77 C1LB78 C1LB79 Flow Port Rating Numatics Model Series Size (SCFM) Element F14B-02 F14B-02M F14B-02MQ F14B-02Q F22B-03 F22B-03A F22B-03AM F22B-03Q F22B-04 F22B-04A F22B-04AM F22B-04Q F32B-06A F32B-06AM F32B-06Q F42B-06 F42B-08 F42B-08A F42B-08AM F42B-08Q 14 14 14 14 22 22 22 22 22 22 22 22 32 32 32 42 42 42 42 42 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 1 1 1 1 32 32 32 32 65 65 65 65 65 65 65 65 105 105 105 270 270 270 270 270 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron Drain Type Poly Manual Poly Manual Metal Manual Poly Manual Auto Auto Poly Manual Auto Auto Auto Auto Metal Manual Poly Manual Poly Manual Auto Auto Bowl Type Polycarbonate Metal Metal Polycarbonate Polycarbonate Metal Polycarbonate Polycarbonate Metal Polycarbonate Polycarbonate Metal Polycarbonate Polycarbonate Polycarbonate Metal Bowl Capacity 1.5 oz 1.5 oz 1.5 oz 1.5 oz 3.8 oz 3.8 oz 3.8 oz 3.8 oz 3.8 oz 3.8 oz 3.8 oz 3.8 oz 8.5 oz 8.5 oz 8.5 oz 8.5 oz 8.5 oz 8.5 oz 8.5 oz 8.5 oz Dimensions 5.94H x 1.68W 5.94H x 1.68W 5.94H x 1.68W 5.94H x 1.68W 7.41H x 2.38W 7.41H x 2.38W 7.41H x 2.38W 7.41H x 2.38W 7.41H x 2.38W 7.41H x 2.38W 7.41H x 2.38W 7.41H x 2.38W 8.88H x3W 8.88H x3W 8.88H x3W 12.6H x4W 12.6H x4W 12.6H x4W 12.6H x4W 12.6H x4W Wt. 0.60 0.65 0.65 0.65 0.65 0.65 1.25 1.25 0.65 0.65 1.25 1.25 1.30 2.50 2.50 3.70 3.70 3.70 4.80 4.80 Price Each
Metal Manual Polycarbonate
Fluid Conveying
C1LB80 C1LB81 C1LB82 C1LB83 C1LB84 C1LB85
662
Air Line FRL's

Air Line Regulators Numatics FlexiBlok Series

Features: Four convenient sizes. High flow in compact size. Locking non-rising adjustment knob. Four different pressure ratings available. Relieving or non-relieving models. Can be installed as modular or individual unit Materials: 14 Series: Zinc Body. 22, 32, 42 Series: Aluminium Body Maximum Inlet Pressure: 250 psi, except for 22 Series which is 200 psi. Operating Temperature Range: 40-120 F
Air Line Regulators Numatics FlexiBlok Series

Catalog Part No. C1LC94 C1LC95 C1LC96 C1LC97 C1LC98 Numatics Model R14R-02G R22R-03G R22R-04G R32R-06G R42R-08G Series 14 22 22 32 42 Port Size 1/4 3/8 1/2 3/4 1 Flow Rating (SCFM) 40 70 70 100 300 Style Relieving Relieving Relieving Relieving Relieving Spring Range 0-125 psi 0-125 psi 0-125 psi 0-125 psi 0-125 psi Gauge Yes Yes Yes Yes Yes Wt. 0.65 0.69 0.69 1.37 4.30 Price Each
Fluid Conveying
Air Line Piggyback Filter/Regulators Numatics FlexiBlok Series

Features: Four convenient sizes. 5 micron element standard (40 micron optional). Can be installed as individual or modular unit. Locking non-rising adjustment knob. Bowl seal held captive (22, 32, and 42 Series). Materials: Polycarbonate bowl standard. Optional metal bowl (sight glass on 22, 32 and 42 Series). Optional CircleVision sight bowl. Maximum Inlet Pressure: Polycarbonate Bowl: 150 psi, Metal Bowl: 200 psi. Operating Temperature Range: 40-120 F Air Line Piggyback Filter/Regulators Numatics FlexiBlok Series
Catalog Part No. C1LC73 C1LC74 C1LC75 C1LC76 C1LC77 C1LC78 C1LC79 C1LC80 C1LC81 C1LC82 C1LC83 C1LC84 C1LC85 C1LC86 C1LC87 Flow Port Rating Numatics Model Series Size (SCFM) Element P14B-02 P14B-02BG P14B-02BGM P22B-03 P22B-03AG P22B-03AGM P22B-04 P22B-04AG P22B-04AGM P32B-06 P32B-06AG P32B-06AGM P42B-08 P42B-08AG P42B-08AGM 14 14 14 22 22 22 22 22 22 32 32 32 42 42 42 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1 40 40 40 60 60 60 60 60 60 90 90 90 300 300 300 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron 5 micron Drain Type Manual Flex Flex Manual Auto Auto Manual Auto Auto Manual Auto Auto Manual Auto Auto Bowl Type Polycarbonate Polycarbonate Metal Polycarbonate Polycarbonate Metal Polycarbonate Polycarbonate Metal Polycarbonate Polycarbonate Metal Polycarbonate Polycarbonate Metal Gauge No Yes Yes No Yes Yes No Yes Yes No Yes Yes No Yes Yes Dimensions 7.90H x 1.68W 7.90H x 1.68W 7.90H x 1.68W 9.86H x 2.38W 9.86H x 2.38W 9.86H x 2.38W 9.86H x 2.38W 9.86H x 2.38W 9.86H x 2.38W 12.2H x 3.00W 12.2H x 3.00W 12.2H x 3.00W 17.4H x 4.00W 17.4H x 4.00W 17.4H x 4.00W Wt. 0.75 0.75 0.80 0.91 0.91 1.50 0.91 0.91 1.50 1.81 1.81 2.99 5.05 5.05 6.15 Price Each
663
Air Line FRL's

Air Line Lubricators Numatics FlexiBlok Series

Features: Four convenient sizes. Lubrication to begin at 2 SCFM. Can be filled under pressure (32 and 42 series). Tamper-resistant knob standard. Optional CircleVision sight bowl. Optional metal bowl (sight glass available on 22, 32, and 42 series). Can be mounted as individual or modular unit. Button head fill optional on all sizes. Atomizing chamber develops longer life aerosols. Materials: Zinc Body (14 Series) and Aluminium Body (22, 32, 42 Series). Maximum Inlet Pressure: 200 psi Operating Temperature Range: 40-120 F Air Line Lubricators Numatics FlexiBlok Series
Catalog Part No. C1LC60 C1LC65 C1LC68 Numatics Model Series L14L-02M L22L-03M L32L-04M 14 22 32 Port Size 1/4 3/8 1/2 Flow Rating (SCFM) 30 95 230 Bowl Type Metal Metal Metal Other Options None None None Dimensions 6.65H x 1.68W 8.12H x 2.38W 9.65H x 3.00W Wt. 0.60 0.69 1.37 Price Each
Fluid Conveying
664
Air Line Filters

Air Line Filters
Air Line Filters Numatics Delta 901X Series

Features: The water separator is an ideal solution where water contamination is present. Water can damage pneumatic components, degrade your final product, and cause valves and cylinders to stick. The water separator utilizes an internal spinner to remove large quantities of contamination by centrifugal action. Water, debris, and rust are spun outward to the inside diameter of the bowl. Gravity then sends the contaminant to the bottom of the bowl for discharge. Recommended Uses: Bulk liquid and solid contamination removal. Downstream from compressor/aftercoolers. Protection for coalescing elements from large liquid loading. Refrigerated compressed air dryers. Materials: Head 1/4 - 3: A380.0 Cast Aluminum Anodized. Bowl 1/4 - 3: A380.0 Cast Aluminum Anodized. Internal Separator Components: A380.0 Cast Aluminum Anodized. Seals: Fluorocarbon (FKM). Standard Manual Drain: Brass Maximum Inlet Pressure: 250 psi. External Auto Drain maximum pressure 230 psi. Maximum Temperature: 200 F. Internal Auto Float Drain: 150 F, Electronic Drain: 130 F, External Auto Drain: 120 F. Air Line Filters Numatics Delta 901X Series
Catalog Part No. C1LB87 C1LB88 Numatics Model F901X-04AB F901X-08AB Port Size 1/2 1 Flow Rating (SCFM) 90 215 Options Internal Auto Float Drain, Mounting Brackets Internal Auto Float Drain, Mounting Brackets Wt. 2.90 5.40 Price Each
665
Pneumatic System Accessories

Air Tool Hose Assemblies - Heavy Duty

Hose Features: Premium, light weight and non-marring. Oil & chemical resistant blend of PVC and special elastomers. Fitting Features: Brass 1/4" NPT male couplings both ends with stainless steel strain relief springs. Pressure Ratings: 300 psi working pressure. 1500 psi burst pressure. Note: Power Port has tested and has certified these assemblies for the stated pressures. Stated pressure ratings are at 70F. Pressure ratings decrease as temperature rises. Air Tool Hose Assemblies - Heavy Duty
Power Port Model
I.D. (in) 0.38 0.38
Length (ft) 25 50
Color Yellow Yellow
Wt. 3.00 6.07
C1CN44 CXAH-3825-ORS C1CN46 CXAH-3850-ORS
Fluid Conveying
Air Tool Hose Assemblies - Light Duty

Hose: Black PVC tube. High tensile strength textile reinforcement. PVC cover, available in blue, red and yellow. Economical, lightweight. U.V. and weather resistant. Fittings: 1/4 inch hoses have 1/4 male NPT both ends. 3/8 inch hoses have 3/8 male NPT both ends. Pressure Rating: 300 PSI Maximum Working Pressure @ 70F. Temperature Range: 14F to 150F. Note: Stated Pressure Rating is at 70F. Pressure Rating decreases as temperature increases. Air Tool Hose Assemblies - Light Duty
Catalog Part No. Kuriyama Model I.D. (in) 0.25 0.25 0.25 0.25 0.25 0.25 0.38 0.38 0.38 0.38 0.38 0.38 Length (ft) 25 50 25 50 25 50 25 50 25 50 25 50 Color Blue Blue Red Red Yellow Yellow Blue Blue Red Red Yellow Yellow Wt. 1.90 3.70 1.90 3.70 1.90 3.70 2.60 5.10 2.60 5.10 2.60 5.10 Price Each
C1FU78 HS1186-04X25 C1FU79 HS1186-04X50 C1FU74 HS1184-04X25 C1FU75 HS1184-04X50 C1FU70 HS1181-04X25 C1FU71 HS1181-04X50 C1FU80 HS1186-06X25 C1FU81 HS1186-06X50 C1FU76 HS1184-06X25 C1FU77 HS1184-06X50 C1FU72 HS1181-06X25 C1FU73 HS1181-06X50
666

Coiled Air Tool Hose Assemblies

Features: Self-retracting for easy storage in minimum space to reduce clutter. A low-cost alternative to bulky, expensive hose reels. Resistant to most chemicals, gasoline, oil and grease. Lightweight and highly flexible with 360 swivel fittings at both ends of assembly. Abrasion and corrosion resistant. Ideal for use with portable air tools, spray guns, and hoists. Hose Material: Nylon II. Maximum Operating Pressure: 180 PSI. Operating Temperature Range: -40F to 200F. Coiled Air Tool Hose Assemblies
Catalog Part No. Aro Model I.D. (in) 1/4 O.D. Working Retracted Thread (in) Length Length Size 5/16 11 ft 6 in 1/4 NPT Wt. 0.35 Price Each
C1KM81 N14-12B
Fluid Conveying
Air Line Lubricating Oil

Features: Recommended for use with pneumatic power tools, motors, valves, cylinders and hoists. It is specially formulated for use in air line lubricators. Proper, regular lubrication helps ensure longer, trouble-free operation by reducing wear. Viscosity: 100-200 SSU @ 100F. Minimum aniline point of 200F. Lubricant Class: Class II Lubricant. Approximate SAE Number : Light SAE 10, non-detergent. Air Line Lubricating Oil
Catalog Part No. C1BJ99 Aro Model 29665 Container Size 1 Quart Wt. 2.00 Price Each
667

Standard Duty Safety Pop-Off Valves

ASME code, National Board Certified Safety Valves are designed to protect un-fired pressure vessels from over-pressure. Maximum Operating Temperature: 400F. Materials: All brass construction with chrome steel ball on a precision machined brass seat. Standard Duty Safety Pop-Off Valves
Catalog Part No. Dixon Model Size 1/4 NPT 1/4 NPT 1/4 NPT Pre-Set Pressure 125 PSI 150 PSI 175 PSI Capacity 78 SCFM 92 SCFM 106 SCFM Wt. 0.25 0.25 0.25 Price Each
C1FP81 SV125 C1FP82 SV150 C1FP83 SV175
Fluid Conveying
668
Pneumatic Controls
Williams Air Controls
Sectional Dual 3-Way Control Valves (Modulating) Williams WM521 Series

Description: WM521 Series controllers are dual 3-way regulating valves which are factory assembled into banks of up to five units. Assemblies with two or more valve units have a single inlet and a common exhaust port. Control levers in multiple valve models are progressively offset to allow for operator hand clearance. Operation: Functionally each WM521 valve unit consists of two 3-way compensating valves which are actuated by a rocker arm attached to a control lever. When the control lever is in the center or neutral position, both outlets are open to exhaust. When the lever is moved in either direction, the corresponding valve under the rocket arm is applied. Output is proportional to control lever position and is balanced against the force of an internal spring. When the control lever is released it spring returns to neutral and any pressure at the outlet is exhausted to atmosphere. Application: The WM521 Series is commonly used for remote pneumatic control of hydraulic spool valves when metering of hydraulic flow is desired. Ports: 1/8-27 NPTF or 1/4 tube push-to-connect. Maximum Operating Pressure: 150 PSI. Compensating Range: 20-85 PSI. Operating Temperature Range: -20F to 160F. Flow Rating: 15 SCFM @ 100 PSI. Mounting: Panel Mounted. Materials: Aluminum body. Buna-N seals. Brass poppets. Stainless steel lever.
Sectional Dual 3-Way Control Valves (Modulating) Williams WM521 Series

Catalog Part No. Williams Model Williams Part No. 130300 Number of Valve Units 1 Ports 1/4 Tube Push-To-Connect Wt. 1.40 Price Each
C1EF49 WM521A1
Note: DAV1221 is Del Hydraulic Model.
669
Pneumatic Controls
Williams Air Controls
Pneumatic Transmission Modulator Williams WM775B Series

When an air throttle is used on a vehicle with an Allison transmission, the cable transmission modulator provides the transmission with a signal proportional to the throttle position in order to control the transmission shift pattern. Application: For FMVSS-124 applications. Port: Accepts 1/4 inch I.D. hose with 45 SAE (or 37 JIC) fitting. Maximum Supply Pressure: 75 PSI. Operating Temperature Range: -20F to 250F. Effective Piston Area: 0.24 in. Mounting: Replaces existing modulator. Materials: Brass body. Polyacrylate elastomer diaphragm. Viton o-ring. Note: WM775B is a non-repairable item. It must be replaced every 12 months or 50,000 miles, whichever comes first, and at each regular transmission oil change.
Fluid Conveying
Pneumatic Transmission Modulator Williams WM775B Series

Catalog Part No. C1DT49 Williams Model WM775B Williams Part No. 117830 For Use With These Allison Transmissions AT-540, CLT-750, HT-750CRD, MT-640, CLBT-750, HT-740, HT-750DRD, MT-650, V-730 Wt. 0.39 Price Each
670
Technical Information Pneumatic Cylinders

1 Pneumatic Cylinders
American Cylinder 76 Series Cylinders Double-Acting

Universal Mount
Bore 3/4 1-1/8 1-1/2 2 2-1/2
A 3.93 4.50 5.52 6.12 5.68
B 0.50 0.56 0.62 0.75 0.68
C 0.50 0.62 0.75 0.87 0.81
D 0.50 0.50 0.75 0.87 0.87
E 0.25 0.25 0.25 0.37 0.37
F 0.06 0.09 0.09 0.10 0.10
G 0.75 0.81 1.12 1.12 1.00
H 0.37 0.50 0.75 0.75 0.75
J 1/8 1/8 1/4 1/4 1/4
K 1.00 1.28 1.71 2.23 2.73
P 5/16-24 3/8-24 1/2-20 5/8-18 1/2-20
R 0.25 0.25 0.31 0.31 0.37
S 0.46 0.50 0.71 0.71 0.56
T 0.31 0.31 0.37 0.37 0.37
U 4.40 4.93 6.21 6.96 6.50
0.31 5/8-18 0.25 0.37 3/4-16 0.31 0.50 1-14 0.43 0.62 1-1/4-12 0.56 0.62 1-3/8-12 0.56
1.
671

Pneumatic Cylinders

L-Mount Bracket
Bore 3/4 1-1/8 1-1/2 2 2-1/2 Part No. M21 M41 M61 M81 M91 A 1.87 1.87 2.37 3.00 3.75 B 1.37 1.50 2.06 2.56 3.06 C 0.81 0.87 1.18 1.50 1.75 D 0.75 0.75 0.93 1.18 1.43 E 1.00 1.06 1.37 1.68 1.62 F 0.56 0.59 0.78 0.96 1.00 G 0.28 0.28 0.28 0.34 0.34 H 0.12 0.12 0.19 0.25 0.25 J 0.62 0.75 1.00 1.25 1.50
Mounting Nut
Bore 3/4 1-1/8 1-1/2 2 2-1/2 Part No. M25 M45 M65 M85 M95 A 5/8-18 3/4-16 1-14 1-1/4-12 1-3/8-12 B 0.93 1.12 1.50 1.87 1.87 C 0.37 0.42 0.54 0.54 0.50
Fluid Conveying
Pivot Bracket & Pin

Bore 3/4 1-1/8 1-1/2 2 2-1/2 Part No. M23 M43 M63 M83 M93 A 1.75 1.75 2.25 2.25 B 2.25 2.25 3.00 3.00 C 0.25 0.25 0.31 0.31 D E F G 0.37 0.50 0.75 0.75 H 1.43 1.43 2.12 2.12 J 0.68 0.68 0.87 0.87 0.28 1.09 0.25 0.28 1.09 0.25 0.28 1.62 0.31 0.28 1.62 0.31 Consult Factory
Rod Clevis & Pin

Bore 3/4 1-1/8 1-1/2 2 2-1/2 Part No. M24 M44 M64 M84 M94 A 0.93 1.12 1.43 1.87 1.31 B 1.18 1.37 1.81 2.31 1.68 C 0.68 0.68 0.93 1.31 0.93 D E F G H 0.25 5/16-24 0.50 0.25 0.18 0.25 3/8-24 0.56 0.25 0.21 0.37 1/2-20 0.75 0.37 0.31 0.43 5/8-18 0.87 0.43 0.37 0.37 1/2-20 0.75 0.37 0.37
672

Pneumatic Cylinders
American Cylinder Stainless Steel Series Cylinders Double-Acting

Universal Mount
Bore 7/16 9/16 3/4 1-1/16 1-1/4 1-1/2 Foot Pivot Bracket Bracket M11SD M11SD M21 M21 M61S M61S M13S M13S M23S M23S M23S M63S Rod Clevis M14S M14S M24S M24 M63S M64S
Bore 7/16 9/16 3/4 1-1/16 1-1/4 1-1/2
A 2.81 2.75 4.03 4.00 4.87 4.50
B 0.71 0.75 0.96 1.06 1.18 1.25
C 0.37 0.37 0.50 0.50 0.62 0.62
D 0.50 0.50 0.50 0.50 0.75 0.75
E 0.00 0.00 0.00 0.00 0.25 0.25
F 0.05 0.05 0.06 0.06 0.09 0.09
G 0.43 0.43 0.62 0.62 0.71 0.81
H 0.31 0.31 0.37 0.37 0.50 0.62
J 10-32 10-32 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT
K 0.74 0.62 0.86 1.12 1.34 1.56
P 10-32 10-32 1/4-28 5/16-24 7/16-20 7/16-20
R 0.15 0.15 0.25 0.25 0.25 0.37
S 0.25 0.25 0.34 0.34 0.40 0.50
T 2.56 2.56 3.75 3.71 4.46 4.12
U 7/16-20 7/16-20 5/8-18 5/8-18 3/4-16 --
V 0.50 0.50 0.75 0.75 0.87 1.00
0.18 7/16-20 -0.18 7/16-20 -0.25 5/8-18 0.21 0.31 5/8-18 0.25 0.43 3/4-16 0.37 0.43 3/4-16 0.37
Fluid Conveying
American Cylinder Stainless Steel Series Cylinders Single-Acting Spring-Extended

Universal Mount
Bore 7/16 3/4 1-1/16 1-1/4 1-1/2 Pivot Bracket M13S M23S M23S M23S M63S Rod Clevis M14S M24S M24 M64S M64S Foot Bracket M11SD M21 M21 M61S M61S
Bore 7/16 3/4 1-1/16 1-1/4 1-1/2
A 2.62 2.71 2.93 4.15 4.25
B 1.43 2.68 2.81 2.81 3.00
C 0.37 0.50 0.50 0.62 0.62
D 0.50 0.50 0.50 0.75 1.25
E 0.00 0.12 0.25 0.25 0.25
F 0.05 0.05 0.06 0.09 0.09
G 0.71 0.96 1.06 1.18 1.25
H 0.31 0.37 0.37 0.50 0.62
T 2.37 2.43 2.65 3.78 3.87
U 0.50 1.00 1.00 1.00 1.00
10-32 0.74 1/8 NPT 0.86 1/8 NPT 1.12 1/8 NPT 1.34 1/8 NPT 1.56
0.18 7/16-20 -- 10-32 0.15 0.25 0.25 5/8-18 0.21 1/4-28 0.25 0.34 0.31 5/8-18 0.25 5/16-24 0.25 0.34 0.43 3/4-16 0.37 7/16-20 0.25 0.43 0.43 3/4-16 0.37 7/16-20 0.37 0.50
0.00 7/16-20 0.50 0.00 5/8-18 0.75 0.00 5/8-18 0.75 0.25 3/4-16 0.87 0.25 -1.00
673

Pneumatic Cylinders
American Cylinder Stainless Steel Series Accessories

Foot Bracket
Bore 7/16 (S/A) 7/16 (D/A) 9/16 3/4 (S/A) 3/4 (D/A) 1-1/16 1-1/4 1-1/2 Part No. M11SS M11SD M11SD M21SS M21 M21 M61S M61S A 1.37 1.37 1.37 1.62 1.87 1.87 2.50 2.50 B 0.87 0.93 0.93 1.09 1.37 1.37 1.75 1.75 C 0.56 0.56 0.56 0.68 0.81 0.81 1.00 1.00 D 0.50 0.50 0.50 0.62 0.75 0.75 0.93 0.93 E 0.62 0.62 0.62 0.75 1.00 1.00 1.50 1.50 F 0.31 0.31 0.31 0.43 0.56 0.56 0.75 0.75 G 0.18 0.18 0.18 0.18 0.28 0.28 0.28 0.28 H 0.07 0.09 0.09 0.10 0.12 0.12 0.12 0.12 J 0.37 0.43 0.43 0.50 0.62 0.62 0.75 0.75
Mounting Nut
Bore 7/16 9/16 3/4 1-1/16 1-1/4 1-1/2 Single-Acting Part No. M15SS M15SD M25SS M25 M45 M45 Thread 3/8-24 7/16-20 1/2-20 5/8-18 3/4-16 3/4-16
Double-Acting Spring-Extended Part No. M15SD M15SD M25 M25 M45 M45
Thread 7/16-20 7/16-20 5/8-18 5/8-18 3/4-16 3/4-16
Rod Clevis & Pin Fluid Conveying
Bore 7/16 9/16 3/4 1-1/16 1-1/4 1-1/2
Part No. M14S M14S M24S M24 M64S M64S
A 0.75 0.75 0.93 0.93 1.31 1.31
B 0.93 0.93 1.18 1.18 1.68 1.68
C 0.56 0.56 0.68 0.68 0.93 0.93
H 0.12 0.12 0.15 0.18 0.25 0.25
0.18 10-32 0.37 0.18 0.18 10-32 0.37 0.18 0.25 1/4-28 0.50 0.25 0.25 5/16-24 0.50 0.25 0.37 7/16-20 0.75 0.37 0.37 7/16-20 0.75 0.37
Pivot Brackets
Bracket M33S only
Part No. M13S M13SP M23S M63S M63SP M93
A 0.50 0.50 0.75 1.00 1.00 1.00
B 0.75 0.75 1.12 1.50 1.50 1.50
C 0.06 0.06 0.12 0.12 0.12 0.24
D 0.18 0.18 0.26 0.26 0.26 0.34
E 0.56 0.56 0.87 1.37 1.37 1.37
F 0.15 0.15 0.25 0.37 0.37 0.37
G 0.50 0.59 0.81 1.00 1.00 1.12
H 0.77 0.77 1.18 1.75 1.75 1.75
J 0.20 0.20 0.31 0.37 0.37 0.37
K 0.28 0.28 0.43 0.62 0.62 0.68
L 0.12 0.12 0.18 0.25 0.25 0.25
Bore 7/16 9/16 3/4 1-1/16 1-1/4 1-1/2
Standard Models Pivot Bushing Models M13S M13S M23S M23S M23S M63S M13SP M13SP M33S M33S M23SP M63SP
674

Pneumatic Cylinders
Aro Silverair Series Cylinders Double-Acting

Nose Mount
Bore 1/2 3/4 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/2
A 2.62 3.47 3.75 4.75 4.44 5.57 5.56 5.56
AS 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
BB 0.41 0.50 0.50 0.62 0.62 0.75 0.81 0.81
CC 0.50 0.50 0.62 1.00 1.00 1.19 1.25 1.25
DD 0.04 0.07 0.07 0.07 0.07 0.09 0.12 0.12
EE 0.37 0.48 0.52 0.69 0.62 0.72 0.69 0.69
FA 0.50 0.50 0.50 0.75 0.75 0.88 0.88 0.88
GG 0.437 0.625 0.625 0.750 0.750 1.030 1.50 1.50
HH
JJ
KK
LL
MM
MN
QM
RT
10-32 7/16-20 -- 10-32 0.62 0.187 0.37 0.12 1/4-28 5/8-18 -1/8 0.88 0.25 0.62 0.16 5/16-24 5/8-18 0.25 1/8 1.12 0.312 0.87 0.25 7/16-20 3/4-16 0.38 1/8 1.31 0.437 0.87 0.18 7/16-20 3/4-16 0.38 1/8 1.55 0.437 0.87 0.25 1/2-20 1-14 0.44 1/4 1.81 0.50 1.25 0.25 1/2-20 1-1/4-12 0.50 1/4 2.07 0.625 1.25 0.31 1/2-20 1-3/8-12 0.50 1/4 2.62 0.625 1.75 0.31
Fluid Conveying
Universal Mount
Bore 1/2 3/4 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/2
A 3.31 4.54 4.62 5.83 5.50 7.13 6.93 6.93
AS 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
BB 0.41 0.50 0.50 0.62 0.62 0.75 0.81 0.81
CC 0.50 0.50 0.62 1.00 1.00 1.19 1.25 1.25
DD 0.04 0.07 0.07 0.07 0.07 0.09 0.12 0.12
EE 0.37 0.48 0.52 0.69 0.62 0.72 0.69 0.69
EP 0.42 0.66 0.62 0.91 0.81 0.98 1.00 1.00
FA 0.50 0.50 0.50 0.75 0.75 0.88 0.88 0.88
GG 0.437 0.625 0.625 0.750 0.750 1.030 1.50 1.50
FF
HH
JJ
KK
LL
MM
MN
PP
QQ
RR
6.12 10-32 7/16-20 -- 10-32 0.62 0.187 0.25 0.31 0.16 4.25 1/4-28 5/8-18 -1/8 0.88 0.25 0.34 0.38 0.25 4.34 5/16-24 5/8-18 0.25 1/8 1.12 0.312 0.34 0.38 0.25 5.47 7/16-20 3/4-16 0.38 1/8 1.31 0.437 0.41 0.50 0.25 5.12 7/16-20 3/4-16 0.38 1/8 1.55 0.437 0.50 0.62 0.38 6.63 1/2-20 1-14 0.44 1/4 1.81 0.50 0.50 0.62 0.38 6.50 1/2-20 1-1/4-12 0.50 1/4 2.07 0.625 0.57 0.75 0.38 6.50 1/2-20 1-3/8-12 0.50 1/4 2.62 0.625 0.57 0.75 0.38
675

Pneumatic Cylinders

L-Mount Bracket
Bore 1/2 Single Acting 1/2 Double Acting 3/4 Single Acting 3/4 Double Acting 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/2 A 0.31 0.31 0.44 0.56 0.56 0.75 0.75 0.94 1.00 1.00 B 0.19 0.19 0.19 0.27 0.27 0.28 0.28 0.34 0.34 0.34 C 0.62 0.62 0.75 1.00 1.00 1.50 1.50 1.50 1.62 1.62 D 1.00 1.00 1.25 1.50 1.50 1.89 1.89 2.25 2.25 2.88 E 0.37 0.37 0.40 0.56 0.56 0.75 0.75 0.88 1.00 1.25 F 0.38 0.44 0.50 0.63 0.63 0.76 0.76 1.04 1.38 1.50 G 56 56 45 45 45 49 49 52 60 63 H 0.57 0.57 0.69 0.81 0.81 1.00 1.00 1.25 1.50 1.75 J 1.38 1.38 1.63 1.88 1.88 2.50 2.50 3.00 3.00 3.75
Mounting Nut
Bore 1/2 Single Acting 1/2 Double Acting 3/4 Single Acting 3/4 Double Acting 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/2
A 0.56 0.68 0.75 0.93 0.93 1.12 1.12 1.50 1.85 2.06
B 0.22 0.25 0.31 0.37 0.37 0.42 0.42 0.56 0.50 0.50
C 3/8-24 7/16-20 1/2-20 5/8-18 5/8-18 3/4-16 3/4-16 1-14 1-1/4-12 1-3/8-12
Fluid Conveying
Pivot Bracket & Pin
Bore 1/2 3/4 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/2
A 0.20 0.26 0.26 0.32 0.39 0.39 0.45 0.45
B 0.52 0.65 0.65 0.77 0.96 0.96 1.20 1.20
C 0.43 0.75 0.75 0.75 1.00 1.00 1.00 1.00
D 0.54 0.87 0.87 0.94 1.25 1.25 1.43 1.43
E 0.22 0.31 0.31 0.31 0.38 0.38 0.38 0.38
F 0.16 0.26 0.26 0.26 0.38 0.38 0.38 0.38
G 50 53 53 53 52 52 48 48
H 0.64 0.87 0.87 1.06 1.37 1.37 1.68 1.68
J 0.75 1.19 1.19 1.25 1.63 1.63 1.81 1.81
Rod Clevis & Pin
Bore 1/2 3/4 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/2
A 0.38 0.50 0.50 0.75 0.75 0.75 0.75 0.75
B 0.19 0.25 0.25 0.38 0.38 0.38 0.38 0.38
C 0.75 0.94 0.94 1.30 1.30 1.30 1.30 1.30
0.38 10-32 0.19 0.94 0.12 0.50 1/4-28 0.25 1.20 0.16 0.50 5/16-24 0.25 1.20 0.16 0.75 7/16-20 0.38 1.70 0.25 0.75 7/16-20 0.38 1.70 0.25 0.75 1/2-20 0.38 1.70 0.31 0.75 1/2-20 0.38 1.70 0.31 0.75 1/2-20 0.38 1.70 0.31
676

Pneumatic Cylinders
Aro Economair Series Cylinders Double-Acting
Bore
Rod Dia
Fluid Conveying
AA
LP
BB
CB
CC
DD
EE
FA
FF
GG
HH
JJ
KK
LL
MM
NN
OO
PP
QQ
1-1/8 0.375 2.031 3.031 0.75 1.75 1.00 0.125 0.422 0.781 0.875 0.748 3/8-16 1-1/2 0.500 2.625 3.625 1.00 2.438 1.438 0.219 0.516 1.156 1.25 1.057 1/2-13 2 0.625 2.625 3.625 1.00 2.438 1.438 0.219 0.516 1.156 1.25 1.057 5/8-11
2-1/2 0.750 2.875 3.875 1.25 2.938 1.688 0.344 0.563 1.375 1.50 1.432 3/4-10 3 4 0.750 2.875 3.875 1.25 2.938 1.688 0.344 0.563 1.375 1.50 1.432 3/4-10 1.000 4.00 5.00 1.25 3.50 2.250 0.406 0.813 1.750 1.875 1.777 1-8
3/4-16 UNF-2A 0.313 1-1/16-18 0.500 UNEF-2A 1-1/16-18 0.500 UNEF-2A 1-3/8-12 0.500 UNF-2A 1-3/8-12 UNF-2A 0.500 1-3/4-12 UN-2A 0.500
1/8-27 1.375 0.313 3.594 0.688 0.375 1/4-18 1.75 0.406 4.688 0.875 0.50 1/4-18 2.25 0.50 4.688 0.875 0.50 3/8-18 2.75 0.625 5.688 1.375 0.625
3/8-18 3.25 0.625 5.688 1.375 0.625 1/2-14 4.25 0.875 7.063 1.438 0.75
Bore 1-1/8 1-1/2 2 2-1/2 3 4
Rod Dia 0.375 0.500 0.625 0.750 0.750 1.000
R 0.16 0.16 0.16 0.94 0.94 0.94
RR
RT
SS 0.969 1.25 1.25 2.00 2.00 2.188
TT -0.438 0.438 0.438 0.438 0.438
UU -0.50 0.50 0.50 0.625 0.625
0.25 -0.3130.172 0.313 -0.4380.438 0.4380.438 0.50 0.438
677

Pneumatic Cylinders
Aro Economair Series Cylinder Accessories

L-Mount Bracket
Bore 1-1/8 1-1/2 2 2-1/2 3 4 A 1.625 3.00 3.00 4.00 4.00 5.00 B 1.281 1.50 1.50 2.00 2.00 2.625 C 1.00 1.688 1.688 2.25 2.25 3.00 D 0.25 0.25 0.25 0.375 0.375 0.438 E 0.25 0.313 0.313 0.375 0.375 0.438 F 0.625 0.906 0.906 1.219 1.219 1.469 H 1.00 1.531 1.531 2.094 2.094 2.531
Mounting Nut
Bore 1-1/8 1-1/2 2 2-1/2 3 4
K 0.375 0.469 0.469 0.781 0.781 0.781
L 1.0625 1.438 1.438 2.0625 2.0625 2.50
M 1.25 1.75 1.75 2.438 2.438 2.938
Fluid Conveying
Steel Rod Clevis
Bore 1-1/8 1-1/2 2 2-1/2 3 4
J 0.75 1.00 1.00 1.25 1.25 1.188
TH
Y 0.25 0.3125 0.3125 0.438 0.4375 0.625
ZZ 0.3125 0.375 0.375 0.50 0.50 0.625
3/8-16 1.75 1.406 0.75 1/2-13 2.25 1.75 1.00 5/8-11 2.25 1.75 1.00 3/4-10 2.688 2.0625 1.25 3/4-10 2.688 2.0625 1.25 1-8 3.375 2.625 1.50
Clevis Bracket
Bore 1-1/8 1-1/2 2 2-1/2 3 4
D 0.25 0.25 0.25 0.375 0.375 0.438
G 0.375 0.50 0.50 0.625 0.625 0.75
R 1.219 1.75 1.75 2.375 2.375 3.00
S 0.313 0.313 0.313 0.375 0.375 0.438
T 2.25 3.00 3.00 4.00 4.00 5.00
U 1.75 2.25 2.25 3.00 3.00 3.75
678
Technical Information Pneumatic Valves

Pneumatic Limit Valves
Aro 100 Series Dimensions
679

Manually Operated Pneumatic Valves
Fluid Conveying
680

681

Aro E Series Dimensions
Fluid Conveying
682

Aro K Series Dimensions
683

Mechanically Operated Pneumatic Valves
Fluid Conveying
684

Pilot Operated Pneumatic Valves
685

Pilot Operated Pneumatic Valves
Aro Alpha Series Dimensions
Fluid Conveying
686

Solenoid Operated Pneumatic Valves
Aro Alpha Series Dimensions
Aro CAT Series Dimensions
687

Solenoid Operated Pneumatic Valves
Aro MaxAir 2-Way Dimensions
Aro MaxAir 4-Way Dimensions
Port Size 3/8 1/2 3/4 1 1-1/4 1-1/2
A 4.193 4.193 4.961 4.961 5.728 5.728
B 2.618 2.618 3.780 3.780 5.157 5.157
C 1.890 1.890 2.756 2.756 3.780 3.780
Fluid Conveying
Aro Sierra 18 Series Dimensions
688
Technical Information - Numatics

L2 Series Manual Valve Dimensions
689

92280 Series Solenoid Valve Dimensions
690

L01 Series Solenoid Valve Dimensions
691

L2 Series Solenoid Valve Dimensions
692
693
Notes
694
Notes
695
Notes
696
Fluid Conveying
Category Page Hydraulic Power & Control Hose Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 698 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 698 Hose Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 747 Hose Assembly Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 752 Hose Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Hose Fittings (Hydraulic & Special Application) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761 Hose Fittings (Industrial) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 838 Hose Clamps & Crimp Ferrules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 854 Tubing Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868 Piping Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 928 Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 928 Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 934 Flexmaster Pipe & Tube Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 937 Weld Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 939 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 940 Quick Disconnects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1057 Miscellaneous Fluid Conveying Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1085 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1085 Metric & BSP Seals & Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1094 Protective Closures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1095 Split Flange Kits & O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1097 Support Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1100 Swivel Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1110 Air Brake Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1113 Performance Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1115
697
Hose
Hydraulic Power & Control Category
+
Page
Hydraulic Hose Wire Inserted Suction . . . . . . . . . . . . . . . . . . . . . Single Wire Braid . . . . . . . . . . . . . . . . . . . . . . . . Single & Double Wire Braid . . . . . . . . . . . . . . . . Double Wire Braid. . . . . . . . . . . . . . . . . . . . . . . . Four & Six Heavy Spiral Reinforced . . . . . . . . . . Thermoplastic . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial Hose Air & Multi-Purpose . . . . . . . . . . . . . . . . . . . . . . . Air & Multi-Purpose (Push-On) . . . . . . . . . . . . . . Petroleum Dispensing. . . . . . . . . . . . . . . . . . . . . Petroleum Transfer . . . . . . . . . . . . . . . . . . . . . . . Water Discharge . . . . . . . . . . . . . . . . . . . . . . . . . Water Suction & Discharge. . . . . . . . . . . . . . . . . Marine Hose Wet Exhaust Hose, Hump Hose, Elbows . . . . . . Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bilge, Drain & Live Well . . . . . . . . . . . . . . . . . . . Sanitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air & Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Special Application Hose Fuel Line & Tank Vent . . . . . . . . . . . . . . . . . . . . Engine & Air Brake . . . . . . . . . . . . . . . . . . . . . . . Air Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Silicone Rubber (Heater) . . . . . . . . . . . . . . . . . . L.P. Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,000 PSI Jack Hose . . . . . . . . . . . . . . . . . . . . Refrigeration / Air Conditioning . . . . . . . . . . . . . . Telfon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Assemblies Hydraulic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
699 701 705 705 709 712 717 720 722 723 724 726 728 732 734 735 736 737 738 739 740 741 742 743 743 744 747 750
Eatons Aeroquip Hose and Fitting Assembly Product Warning Flexible hose lines offer many advantages over rigid tubing including routing ease, vibration absorption, sound deafening and the ability to accommodate movement of connected components. However, hose lines require caution in use not only to provide long service, but also to guard against potentially dangerous failure. Important The user should carefully observe the precautions listed in this catalog, including the recommendations on the selection of hose and fittings on the relevant pages, and the pages on fluid compatibility. In addition, care should be taken not to exceed the minimum bend radius listed for each hose size and type in the hose section. Maximum operating pressure should not exceed pressures listed in the hose data. Instructions for assembling fittings to different hose should be followed carefully to ensure the performance of the completed assembly.
WARNING
Eaton fitting tolerances are engineered to match Eatons Aeroquip hose tolerances. The use of Eaton fittings on hose supplied by other manufacturers and/or the use of Eatons Aeroquip hose with fittings supplied by other manufactures may result in the production of unreliable and unsafe hose assemblies and is neither recommended nor authorized by Eaton Corporation or any of its affiliates or subsidiaries.
WARNING
Application considerations must be observed in selecting appropriate components for the application of these products contained herein. The failure to follow the recommendations set forth in this catalog may result in an unstable application which may result in serious personal injury or property damage. EATON CORPORATION OR ANY OF ITS AFFILIATES OR SUBSIDIARIES SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGATIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSEQUENTIAL, INCIDENTIAL AND CONTINGENT DAMAGES) ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE AEROQUIP HOSE FITTINGS, HOSE AND AEROQUIP APPROVED EQUIPMENT, AND IN CONFORMANCE WITH EATONS AEROQUIP PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY. Failure to follow these processes and product instructions and limitations could lead to premature hose assembly failures resulting in property damage, serious injury or death.
Fluid Conveying
Hose Application Warnings The determination and methods of the use, suitability, installation and design application for the parts and assemblies we sell is the responsibility of the purchaser. Hose conforms to the specification and requirements specified by the hose manufacturer. Agency and industry standards may apply to your application. It is your responsibility to decide what regulations and/or standards apply, and inform us. We will then advise you if the products selected meet those standards. Improper selection, installation and/or routing may significantly shorten the life of a hydraulic hose, which could result in hose rupture and failure, which may then result in serious persinal injury or property damage. If you dont already have the proper training or information, ask for: Eaton/Aeroquip Fluid Conveyance Products Catalog A-HOOV-MC001-E1 Warnings - pages 11-12 Fluid Compatibility - pages 349-355 (this catalog page 1357 ) SAE Recommended Practices (SAE J1273) - page 356 (this catalog page 1355 ) Routing & Installation - page 358 (this catalog page 1364 Thread Style Pressure Performance - page 376 (this catalog page 1349 ) Most hydraulic fluids are flammable and proper safeguards have to be taken to contain any fluid if a hose failure occurs in an environment with a source of ignition. Hoses have a service life, and high repetitive shock reduces hose service life. You need to inspect and change out hoses within their service life for your application or hose rupture and failure may occur. S.T.A.M.P. - You must consider the Size, Temperature, Application, Medium and Pressure when selecting hose and hose fittings.
698
Hydraulic Hose
FC619
Wire Inserted Suction Exceeds SAE 100R4 Flexible
Construction: Synthetic rubber inner tube, reinforcement consisting of a helical wire between two textile braids and black synthetic rubber cover with orange layline. Application: Suction and transfer applications for petroleum hydraulic fluids, fuel, lubricating oils, gasoline, water and many other industrial fluids. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +275F. Hydraulic Crimp Fittings: Global TTC (Steel) page 763 (-12 requires buffing, -20 requires 1AT or 1AV part number). Global TTC (Stainless Steel) page 825 (-12 requires buffing, -20 requires 1AT or 1AV part number). Global TTC12 page 777 (-12 only, no buffing required). Field Crimp page 790 (-12 and -16 only). Industrial Reusable Fittings & Attachment Suggestions: Shank Type Combination Nipples attached with T-Bolt Band Clamps or Preformed Clamps. Industrial Reusable Fittings: Shank Type Combination Nipples (Steel) page 843 (Stainless Steel) page 845 Industrial Reusable Fitting Attachment: T-Bolt Clamps (stainless band) page 859 Trident #720 S.S. T-Bolt Clamps page 860 Band-It Jr.Preformed Clamps page 864 Note: Maximum working pressure for clamped hose assembly is 50 psi. FC619
Catalog Part No. C1EK58 C1EK59 C1EK60 C1EK61 C1EK62 Hose I.D. Hose Aeroquip Model (in) O.D. (in) FC619-12 FC619-16 FC619-20 FC619-24 FC619-32 0.75 1.00 1.25 1.50 2.00 1.21 1.48 1.75 2.04 2.55 Maximum Operating Pressure (psi) 300 250 200 150 100 Minimum Burst Pressure (psi) 1200 1000 800 600 400 Minimum Bend Radius (in) 2.5 3.0 4.0 5.0 6.0 Vacuum Service (in/Hg) 25 25 25 25 25 Reel Qty (ft) Rolls Only Rolls Only Rolls Only Rolls Only Rolls Only Wt. (per ft) 0.46 0.56 0.78 1.00 Price (per ft)
1.23
Note: Maximum working pressure for clamped hose assembly is 50 PSI.
699
Hydraulic Hose
2661
Wire Inserted Suction Exceeds SAE 100R4 AQP Blue
Construction: AQP elastomer tube, reinforcement consisting of a helical wire between two textile braids and blue AQP elastomer cover. Application: Suction and transfer applications for petroleum and phosphate ester hydraulic fluids, fuel, lubricating oils, gasoline, water and many other industrial fluids. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +300F. Hydraulic Crimp Fittings: Global TTC (Steel) page 763 (-12 requires buffing, -20 requires 1AT or 1AV part number). Global TTC (Stainless Steel) page 825 (-12 requires buffing, -20 requires 1AT or 1AV part number). Global TTC12 page 777 (-12 only, no buffing required). Field Crimp page 790 (-12 and -16 only). Industrial Reusable Fittings & Attachment Suggestions: Shank Type Combination Nipples attached with T-Bolt Band Clamps or Preformed Clamps. Industrial Reusable Fittings: Shank Type Combination Nipples (Steel) page 843 (Stainless Steel) page 845 Industrial Reusable Fitting Attachment: T-Bolt Clamps (stainless band) page 859 Trident #720 S.S. T-Bolt Clamps page 860 Band-It Jr.Preformed Clamps page 864 Note: Maximum working pressure for clamped hose assembly is 50 psi. 2661
Catalog Part No. C1BJ20 C1BJ21 C1BJ22 C1BJ23 Hose I.D. Hose Aeroquip Model (in) O.D. (in) 2661-12 2661-16 2661-20 2661-24 2661-32 0.75 1.00 1.25 1.50 2.00 1.25 1.50 1.80 2.06 2.55 Maximum Operating Pressure (psi) 300 250 200 150 100 Minimum Burst Pressure (psi) 1200 1000 800 600 400 Minimum Bend Radius (in) 5.0 6.0 8.0 10.0 12 Vacuum Service (in/Hg) 28 28 28 28 28 Reel Qty (ft) Rolls Only Rolls Only Rolls Only Rolls Only Rolls Only Wt. (per ft) 0.50 0.90 0.94 1.15 1.25 Price (per ft)
Fluid Conveying
C1BJ24
Note: Maximum working pressure for clamped hose assembly is 50 PSI.
700
Hydraulic Hose
GH194
Construction: AQP elastomer tube, single wire braid reinforcement and blue AQP elastomer cover. Application: Petroleum and fire-resistant hydraulic fluids, fuel and lubricating oils, gasoline, water and other industrial fluids. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: 40F to +300F. Hydraulic Crimp Fittings: Global TTC (Steel) page 763 Global TTC (Stainless Steel) page 825 Global Skive page 791 GH194
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.38 0.50 0.69 0.81 Maximum Operating Pressure (psi) 3000 2500 Minimum Burst Pressure (psi) 12000 10000 Minimum Bend Radius (in) 5.00 7.00 Vacuum Service (in/Hg) Reel Qty (ft) 450-550 350-450 Wt. (per ft) 0.25 0.30 Price (per ft)
C1KM12 GH194-6 C1KM13 GH194-8
GH663
Single Wire Braid Triple Crown Advantage SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN
Fluid Conveying
Construction: Synthetic rubber tube, single wire braid reinforcement and black synthetic rubber cover. Application: Hydraulic system service with petroleum and water-base fluids, for general industrial service. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +212F. Crimp Fittings: Global TTC (Steel) page 763 Global TTC (Stainless Steel) page 825 Field Crimp page 790 Global Skive page 791 Reusable Fittings: Thru-The-Cover (Steel) page 806 Note: Pressure ratings for assemblies with Field Crimp or Reusable Fittings are up to 31% lower than assemblies using Global TTC Crimp fittings. See table below. GH663
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.25 0.25 0.38 0.38 0.50 0.50 0.53 0.53 0.69 0.69 0.81 0.81 Maximum Operating Pressure (psi) Minimum Burst Pressure (psi) Minimum Bend Radius (in) 4 4 5 5 7 7 Vacuum Service (in/Hg) Reel Qty (ft) 450-550 225-300 450-550 225-300 450-550 225-300 Wt. (per ft) 0.16 0.16 0.25 0.25 0.30 0.53 Price (per ft)
C1CX53 GH663-4R500 C1CX52 GH663-4R250 C1CX55 GH663-6R500 C1CX54 GH663-6R250 C1CX57 GH663-8R500 C1CX56 GH663-8R250
3700(Global) 14800(Global) 2750(other) 11000(other) 3700(Global) 14800(Global) 2750(other) 11000(other) 3400(Global) 13600(Global) 2250(other) 9000(other) 3400(Global) 13600(Global) 2250(other) 9000(other) 2900(Global) 11600(Global) 2000(other) 8000(other) 2900(Global) 11600(Global) 2000(other) 8000(other)
701
Hydraulic Hose
Hydraulic Power & Control GH663
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.75 1.00 1.25 1.09 1.41 1.71 Maximum Operating Pressure (psi) Minimum Burst Pressure (psi) Minimum Bend Radius (in) 9.5 12 16.5 Vacuum Service (in/Hg) Reel Qty (ft) 225-300 125-200 Rolls Only Rolls Only Wt. (per ft) 0.45 0.68 0.88 1.05 Price (per ft)
C1CX49 GH663-12R250 C1CX50 GH663-16R150 C1CX51 GH663-20
2000(Global) 8000(Global) 1250(other) 5000(other) 1500(Global) 6000(Global) 1000(other) 4000(other) 950 3770
C1FF97 GH663-24 1.50 1.99 725 2900 20.0 Note: Reeled hose may be purchased by the foot or by the reel. GH663 Hose Assemblies: page 747 Note: For older hose without a crown on the layline, working pressures are lower. Contact us for details.
Aeroquip GH663 Cut Lengths

Catalog Part No. C1JL22 C1JL23 C1JL24 C1JL25 C1JL26 C1JL27 C1JL18 C1JL19 C1JL20 C1JL21 Part Number 663-4-25FT 663-4-50FT 663-6-25FT 663-6-50FT 663-8-25FT 663-8-50FT 663-12-25FT 663-12-50FT 663-16-25FT 663-16-50FT GH663-4 x 25 Ft Cut Length GH663-4 x 50 Ft Cut Length GH663-6 x 25 Ft Cut Length GH663-6 x 50 Ft Cut Length GH663-8 x 25 Ft Cut Length GH663-8 x 50 Ft Cut Length GH663-12 x 25 Ft Cut Length GH663-12 x 50 Ft Cut Length GH663-16 x 25 Ft Cut Length GH663-16 x 50 Ft Cut Length Description Wt. Price Each
Fluid Conveying
FRH1AT
Single Wire Braid SAE 100R1AT Performance
Construction: Synthetic rubber tube, single wire braid reinforcement and black synthetic rubber cover. Application: Hydraulic system service with petroleum and water-base fluids, for general industrial service. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on Operating Temperature Range: -40F to +212F. Crimp Fittings: Global TTC (Steel) page 763 Global TTC (Stainless Steel) page 825 FRH1AT
Maximum Working Pressure (psi) 2000 Minimum Burst Pressure (psi) 8000
Catalog Part No. C1KH19
Hose I.D. Hose Aeroquip Model (in) O.D. (in) FRH1AT-8RL 0.50 0.85
Minimum Bend Radius (in) 7
Vacuum Service (in/Hg)
Reel Qty (ft) 350-450
Wt. (per ft) 0.28
Price (per ft)
Note: Reeled hose may be purchased by the foot or by the reel.
702
Hydraulic Hose
FC300
Single Wire Braid Exceeds SAE 100R5 AQP Blue
Construction: AQP elastomer tube, polyester inner braid, single wire braid reinforcement and blue polyester braid cover. Application: Hydraulics handling petroleum base fluids, air, gasoline, fuel and lubricating oils, fire resistant hydraulic fluids and other industrial fluids. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -55F to +300F except air +250F Reusable Fittings: Reduced Bore (Steel) page 800 Reduced Bore (Stainless Steel) page 829 Reduced Bore (Brass) page 833 FC300
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.19 0.25 0.31 0.41 0.50 0.62 0.88 1.12 1.38 1.81 2.38 0.52 0.58 0.67 0.76 0.93 1.08 1.27 1.50 1.75 2.22 2.88 Maximum Operating Pressure (psi) 3000 3000 2250 2000 1750 1500 800 625 500 300 300 Minimum Burst Pressure (psi) 12000 12000 9000 8000 7000 6000 3200 2500 2000 1200 1200 Minimum Bend Radius (in) 3 3.38 4 4.62 5.5 6.5 7.38 9 10.5 13.25 24.00 Vacuum Service (in/Hg) 28 28 28 28 28 28 20 20 15 11 8 Reel Qty (ft) 490-640 390-510 300-390 450-600 300-390 230-300 170-210 Rolls Only Rolls Only Rolls Only Rolls Only Wt. (per ft) 0.15 0.19 0.23 Price (per ft)
C1CR45 FC300-04 C1CR46 FC300-05 C1CR47 C1CR48 C1CR49 C1CR50 C1CR51 C1CR52 FC300-06 FC300-08 FC300-10 FC300-12 FC300-16 FC300-20
Fluid Conveying
0.26 0.37 0.44 0.41 0.52 0.64 0.84 1.80
C1CR53 FC300-24 C1CR54 FC300-32 C1ZY17 FC300-40
Aeroquip FC300 Cut Lengths

Catalog Part No. C1JK89 C1JK90 C1JK91 C1JK92 C1JK93 C1JK94 C1JK95 C1JK96 C1JK83 C1JK84 C1JK85 C1JK86 C1JK87 C1JK88 Part Number 300-4-25FT 300-4-50FT 300-5-25FT 300-5-50FT 300-6-25FT 300-6-50FT 300-8-25FT 300-8-50FT 300-10-25FT 300-10-50FT 300-12-25FT 300-12-50FT 300-16-25FT 300-16-50FT FC300-04 x 25 Ft Cut Length FC300-04 x 50 Ft Cut Length FC300-05 x 25 Ft Cut Length FC300-05 x 50 Ft Cut Length FC300-06 x 25 Ft Cut Length FC300-06 x 50 Ft Cut Length Description Wt. Price Each
FC300-08 x 25 Ft Cut Length FC300-08 x 50 Ft Cut Length FC300-10 x 25 Ft Cut Length FC300-10 x 50 Ft Cut Length FC300-12 x 25 Ft Cut Length FC300-12 x 50 Ft Cut Length FC300-16 x 25 Ft Cut Length FC300-16 x 50 Ft Cut Length
703
Hydraulic Hose
2651
Single Wire Braid SAE 100R5 Performance
Construction: Synthetic rubber tube, textile inner braid, single wire braid reinforcement, outer textile braid and black synthetic rubber cover. Application: Hydraulics, gasoline, fuel and lubricating oils, air and water. Except air, not to exceed 250 psi or +160F. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +212F, except air +160F. Reusable Fittings: Reduced Bore (Steel) page 800 Reduced Bore (Stainless Steel) page 829 Reduced Bore (Brass) page 833 2651
Catalog Part No. C1BJ12 C1BJ14 C1BJ15 C1BJ16 Hose I.D. Hose Aeroquip Model (in) O.D. (in) 2651-4 2651-5 2651-6 2651-8 0.19 0.25 0.31 0.41 0.62 0.88 1.12 0.52 0.58 0.68 0.75 1.08 1.23 1.50 Maximum Operating Pressure (psi) 3000 3000 2250 2000 1500 800 625 Minimum Burst Pressure (psi) 12000 12000 9000 8000 6000 3200 2500 Minimum Bend Radius (in) 3 3.38 4 4.62 6.5 7.38 9 Vacuum Service (in/Hg) 28 28 28 28 28 20 20 Reel Qty (ft) 540-720 420-560 320-420 470-620 230-300 180-240 Rolls Only Wt. (per ft) 0.16 0.21 0.24 0.28 0.52 0.46 0.54 Price (per ft)
Fluid Conveying
C1BH98 2651-12 C1BH99 2651-16 C1BJ11 2651-20
704
Hydraulic Hose
FC639
Single & Double Wire Braid 3000 PSI All Sizes Flexible Meets SAE 100R17
Construction: Synthetic rubber tube, single wire braid reinforcement (sizes -4 -6 -8), double wire braid reinforcement (sizes -10 -12 -16), ozone resistant black synthetic rubber cover. Application: General industrial & hydraulic system service with petroleum & water-base fluids. Recommended for high pressure oil lines used on construction equipment and other off-highway applications. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to 212F. Crimp Fittings: Global TTC (Steel) page 763 Global Skive page 791 FC639
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.38 0.50 0.67 0.81 Maximum Operating Pressure (psi) 3000 3000 Minimum Burst Pressure (psi) 12000 12000 Minimum Bend Radius (in) 2.50 3.50 Vacuum Service (in/Hg) Reel Qty (ft) 450-550 450-550 Wt. (per ft) 0.23 0.32 Price (per ft)
C1ZX98 FC639-06 C1ZX97 FC639-08
Fluid Conveying
GH781
Double Wire Braid Triple Crown Advantage SAE 100R16 Type S, EN857 2SC, ISO 11237-1 Type 2SC 1/2 SAE Bend Radius
Construction: Synthetic rubber tube, double wire braid reinforcement and black synthetic rubber cover. Application: Hydraulic system service with petroleum and water-base fluids, for general industrial service. Meets or exceeds DIN requirements at 1/2 SAE bend radius. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F. to +212F. Crimp Fittings: Global TTC (Steel) page 763 Global TTC (Stainless Steel) page 825 Global Skive page 791 GH781
Maximum Minimum Vacuum Hose I.D. Hose Operating Minimum Burst Bend Radius Service (in) O.D. (in) Pressure (psi) Pressure (psi) Aeroquip Model (in) (in/Hg) GH781-4R500 GH781-4R250 0.25 0.25 0.38 0.38 0.50 0.50 0.63 0.75 1.00 0.53 0.53 0.69 0.69 0.81 0.81 0.93 1.10 1.42 6500 6500 5300 5300 4500 4500 4000 3500 3000 26000 26000 21200 21200 18000 18000 16000 14000 12000 2.0 2.0 2.50 2.50 3.5 3.5 4 4.75 6
Catalog Part No. C1CX63 C1CX62
Reel Qty (ft) 450-550 225-300 450-550 225-300 450-550 225-300 225-300 225-300 125-200
Wt. (per ft) 0.22 0.22 0.29 0.29 0.39 0.39 0.44 0.53 0.72
Price (per ft)
C1CX65 GH781-6R500 C1CX64 GH781-6R250 C1CX67 C1CX66 C1CX58 C1CX59 GH781-8R500 GH781-8R250 GH781-10R250 GH781-12R250
C1CX60 GH781-16R150
705
Hydraulic Hose
Catalog Part No. C1CX61 Maximum Minimum Vacuum Hose I.D. Hose Operating Minimum Burst Bend Radius Service Aeroquip Model (in) O.D. (in) Pressure (psi) Pressure (psi) (in) (in/Hg) GH781-20 1.25 1.50 1.65 2.03 2500 2000 10000 8000 8.25 10.0 Reel Qty (ft) Rolls Only Rolls Only Rolls Only Wt. (per ft) 1.09 1.40 1.90 Price (per ft)
C1FH59 GH781-24
C1FH60 GH781-32 2.00 2.53 1600 6400 12.5 Note: Reeled hose may be purchased by the foot or by the reel. GH781 Hose Assemblies: page 748 Note: For older hose without a crown on the layline, working pressures are lower. Contact us for details.
Aeroquip GH781 Cut Lengths

Catalog Part No. C1JL34 C1JL35 C1JL36 C1JL37 C1JL38 C1JL39 C1JL28 C1JL29 C1JL30 C1JL31 C1JL32 C1JL33 Part Number 781-4-25FT 781-4-50FT 781-6-25FT 781-6-50FT 781-8-25FT 781-8-50FT 781-10-25FT 781-10-50FT 781-12-25FT 781-12-50FT 781-16-25FT 781-16-50FT GH781-4 x 25 Ft Cut Length GH781-4 x 50 Ft Cut Length GH781-6 x 25 Ft Cut Length GH781-6 x 50 Ft Cut Length GH781-8 x 25 Ft Cut Length GH781-8 x 50 Ft Cut Length GH781-10 x 25 Ft Cut Length GH781-10 x 50 Ft Cut Length GH781-12 x 25 Ft Cut Length GH781-12 x 50 Ft Cut Length GH781-16 x 25 Ft Cut Length GH781-16 x 50 Ft Cut Length Description Wt. Price Each
Fluid Conveying
706
Hydraulic Hose
GH793
Double Wire Braid Meets or Exceeds Din 20 022 Type 2SN Exceeds SAE 100R2AT Hi-Impulse
Construction: Synthetic rubber tube, double wire braid reinforcement and black synthetic rubber cover. Application: Hydraulic system service with petroleum and water-base fluids, for general industrial service. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F. to +212F. Crimp Fittings: Global TTC (Steel) page 763 Global TTC (Stainless Steel) page 825 Field Crimp page 790 Global Skive page 791 Reusable Fittings: Thru-The-Cover (Steel) page 808 Note: Pressure ratings for assemblies with Field Crimp or Reusable Fittings are up to 31% lower than assemblies using Global TTC or Global Skive Crimp fittings. See table below. GH793
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.25 0.25 0.38 0.38 0.50 0.50 0.62 0.75 1.00 0.60 0.60 0.75 0.75 0.87 0.87 0.98 1.16 1.50 Maximum Operating Pressure (psi) Minimum Burst Pressure (psi) Minimum Bend Radius (in) 4 4 5 5 7 7 8 9.5 12 Vacuum Service (in/Hg) Reel Qty (ft) 450-550 225-300 450-550 225-300 450-550 225-300 225-300 225-300 125-200 Wt. (per ft) 0.26 0.26 0.38 0.38 Price (per ft)
C1CX74 GH793-4R500 C1CX73 GH793-4R250 C1CX76 GH793-6R500 C1CX75 GH793-6R250 C1CX78 GH793-8R500 C1CX77 GH793-8R250 C1CX68 GH793-10R250
5750(Global) 23000(Global) 5000(other) 20000(other) 5750(Global) 23000(Global) 5000(other) 20000(other) 5000(Global) 20000(Global) 4000(other) 16000(other) 5000(Global) 20000(Global) 4000(other) 16000(other) 4250(Global) 17000(Global) 3500(other) 14000(other) 4250(Global) 17000(Global) 3500(other) 14000(other) 3625(Global) 14500(Global) 2750(other) 11000(other) 3125(Global) 12500(Global) 2250(other) 9000(other) 2500(Global) 10000(Global) 2000(other) 8000(other)
0.46 0.46 0.54 0.66 1.01
C1CX69 GH793-12R250 C1CX70 GH793-16R150
707
Hydraulic Hose
FC195
Double Wire Braid Exceeds Din 20 022 Type 2ST Exceeds SAE 100R2A AQP Hi-Impulse Blue
Construction: AQP elastomer tube, double wire braid reinforcement and blue AQP elastomer cover. Application: Hydraulic system service with petroleum, fire resistant, water-base fluids, fuel and lubricating systems. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F. to +300F. Crimp Fittings: Global Skive page 791 Reusable Fittings: Skive (Steel) page 807 Skive (Stainless Steel) page 829 Note: Pressure ratings for assemblies with Reusable Fittings are lower than assemblies using Crimp fittings. See table below. FC195
Catalog Part No. Aeroquip Model Maximum Minimum Hose I.D. Hose Operating Minimum Burst Bend Radius (in) O.D. (in) Pressure (psi) Pressure (psi) (in) 0.38 0.84 5000(crimp) 20000(crimp) 4000(reusable) 16000(reusable) 5 Vacuum Service (in/Hg) Reel Qty (ft) 400-520 Wt. (per ft) 0.45 Price (per ft)
C1CR14 FC195-06
Fluid Conveying
GH195
Double Wire Braid Meets or Exceeds Din 20 022 Type 2SN Exceeds SAE 100R2AT AQP Hi-Impulse Blue
Construction: AQP elastomer tube, double wire braid reinforcement and blue AQP elastomer cover. Application: Hydraulic system service with petroleum, fire resistant and water-base fluids, fuel and lubricating systems. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F. to +300F. Crimp Fittings: Global TTC (Steel) page 763 Global TTC (Stainless Steel) page 825 Global Skive page 791 GH195
Catalog Part No. Hose I.D. Hose (in) O.D. (in) Aeroquip Model 0.25 0.38 0.50 0.63 0.75 1.00 1.25 0.60 0.75 0.87 0.99 1.16 1.49 1.92 Maximum Operating Pressure (psi) 5750 5000 4250 3250 3000 2500 2250 Minimum Burst Pressure (psi) 23000 20000 17000 13000 12000 10000 9000 Minimum Bend Radius (in) 4 5 7 8.00 9.5 12 16.5 Vacuum Service (in/Hg) Reel Qty (ft) 320-420 Rolls Only 300-390 240-310 180-240 120-160 Rolls Only Wt. (per ft) 0.27 0.39 0.46 0.54 0.67 1.04 1.60 Price (per ft)
C1CX38 GH195-4 C1CX39 GH195-6 C1CX40 GH195-8 C1ZU72 GH195-10 C1CX35 GH195-12 C1CX36 GH195-16 C1CX37 GH195-20
708
Hydraulic Hose
FC693
Double Wire Braid Aviation Ground Support Equipment EPDM Tube and Cover Green
Construction: EPDM tube, double wire braid reinforcement and green EPDM cover. Application: Aviation ground support equipment service with straight phosphate ester fluids (Skydrol LD4, Skydrol 500B, Hyjet IVA Plus). Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Note: Not designed for use with petroleum based fluids. Operating Temperature Range: -40F. to +175F. Crimp Fittings: Global TTC (Steel) page 763 Global TTC (Stainless Steel) page 825 FC693
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.25 0.38 0.50 0.595 0.75 0.871 Maximum Operating Pressure (psi) 5000 4000 3500 Minimum Burst Pressure (psi) 20000 16000 14000 Minimum Bend Radius (in) 4.00 5.00 7.00 Vacuum Service (in/Hg) Reel Qty (ft) Rolls Only Rolls Only Rolls Only Wt. (per ft) 0.25 0.36 0.40 Price (per ft)
C1CS97 FC693-04 C1CS98 FC693-06 C1CS99 FC693-08
Fluid Conveying
GH493
Four Heavy Spiral Wire Triple Crown Advantage SAE 100R12, EN856 Type R12, EN856 4SP Performance (-8 thru -16)
Construction: Synthetic rubber tube, 4 spiral reinforcement and black synthetic rubber cover. Application: Hydraulic system service with petroleum and water-base fluids, for general industrial service. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F. to +260F. Crimp Fittings: Global TTC12 page 777 Note: -6 size approved for 10,000 psi max. operating pressure for static jack hose applications. GH493
Catalog Part No. Hose I.D. Hose (in) O.D. (in) Aeroquip Model 0.38 0.50 0.63 0.75 1.00 0.79 0.92 1.11 1.20 1.48 Maximum Operating Pressure (psi) 6500 6000 6000 5500 5100 Minimum Burst Pressure (psi) 26000 24000 24000 22000 20400 Minimum Bend Radius (in) 5 7 8 9.5 12 Vacuum Service (in/Hg) Reel Qty (ft) Rolls Only Rolls Only Rolls Only Rolls Only Rolls Only Wt. (per ft) 0.47 0.59 0.69 0.92 1.22 Price (per ft)
C1CX47 GH493-6 C1CX48 GH493-8 C1CX41 GH493-10 C1CX42 C1CX43 GH493-12 GH493-16
709
Hydraulic Hose
Catalog Part No. C1CX44 C1CX45 Hose I.D. Hose Aeroquip Model (in) O.D. (in) GH493-20 GH493-24 1.25 1.50 1.83 2.12 Maximum Operating Pressure (psi) 4500 4000 Minimum Burst Pressure (psi) 18000 16000 Minimum Bend Radius (in) 16.5 20 Vacuum Service (in/Hg) Reel Qty (ft) Rolls Only Rolls Only Wt. (per ft) 1.64 2.10 2.81 Price (per ft)
C1CX46 GH493-32 2.00 2.64 4000 16000 25 Rolls Only Note: For older hose without a crown on the layline, working pressures are approximately 60% lower. Contact us for details. GH493 Hose Assemblies: page 749
Aeroquip GH493 Cut Lengths Pneumatic Power & Control

Catalog Part No. C1JL15 C1JL16 C1JL17 C1JK97 C1JK98 C1JK99 C1JL11 C1JL12 C1JL13 Part Number 493-6-50FT 493-8-25FT 493-8-50FT 493-10-25FT 493-10-50FT 493-12-25FT 493-12-50FT 493-16-25FT 493-16-50FT GH493-6 x 50 Ft Cut Length GH493-8 x 25 Ft Cut Length GH493-8 x 50 Ft Cut Length GH493-10 x 25 Ft Cut Length GH493-10 x 50 Ft Cut Length GH493-12 x 25 Ft Cut Length GH493-12 x 50 Ft Cut Length GH493-16 x 25 Ft Cut Length GH493-16 x 50 Ft Cut Length Description Wt. Price Each
Fluid Conveying
FC500
X-FLEX SAE 100R13 Performance Flexible, High Pressure Hose
Construction: Synthetic rubber inner tube, 4-heavy spiral wire reinforcement (sizes -12 to -24), 6-heavy wire spiral reinforcement (size -32) and our DURA-TUFF rubber cover. Application: High pressure hydraulic system service with petroleum and water-base fluids for low temperature applications. Operating Temperature Range: -40F to 260F Crimp Fittings: page 1355 FC500
Catalog Part No. C1KL81 C1KL82 C1KL83 C1KL84 C1KL85 Aeroquip Model FC500-12 FC500-16 FC500-20 FC500-24 FC500-32 Hose I.D. (in) 0.75 1.00 1.25 1.50 2.00 Hose O.D. (in) 1.26 1.54 1.85 2.17 2.86 Maximum Minimum Burst Operating Pressure (psi) Pressure (psi) 5076 5076 5076 5076 5076 20304 20304 20304 20304 20304 Minimum Bend Radius (in) 4.75 6.00 8.25 10.00 18.75 Wt. (per ft) 0.84 1.24 1.69 2.25 4.06 Price (per ft)
710
Hydraulic Hose
FC636
Four Heavy Spiral Wire Aviation Ground Support Equipment EPDM Tube and Cover Green
Construction: EPDM tube, 4 spiral wire reinforcement and green EPDM cover. Application: Aviation ground support equipment service with straight phosphate ester fluids (Skydrol LD4, Skydrol 500B, Hyjet IVA Plus). Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Note: Not designed for use with petroleum based fluids. Operating Temperature Range: -40F. to +175F. Crimp Fittings: Global TTC12 page 777 FC636
C1CS94 FC636-12 C1CS95 FC636-16 C1CS96 FC636-20
Fluid Conveying
FC254
Four Heavy Spiral Wire Triple Crown Advantage SAE 100R11, EN856 4SH Performance
Construction: Synthetic rubber tube, 4 heavy spiral wire reinforcement and a black synthetic rubber cover. Application: Hydraulic system service with petroleum and water-base fluids, for general industrial service. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F. to +250F. Crimp Fittings: Spiral TTC page 785 FC254
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.75 1.26 Maximum Operating Pressure (psi) 7200 Minimum Burst Pressure (psi) 28800
Minimum Bend Radius (in) 11.00
Reel Qty (ft) Rolls Only
Wt. (per ft) 1.12
Price (per ft)
C1HE57 FC254-12
Note: For older hose without a crown on the layline, working pressures are lower. Contact us for details.
711
Hydraulic Hose
FC606
Six Spiral Wire SAE 100R15
Construction: Synthetic rubber tube, 6-spiral wire reinforcement, synthetic rubber cover. Application: High pressure hydraulics, hydrostatic transmissions. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F. to +250F (Sizes -16 and -20). -40F. to +212F (Size -24). Crimp Fittings: Spiral TTC page 785 FC606
C1FN45 FC606-16 C1FQ25 FC606-20 C1JD75 FC606-24
Fluid Conveying
3130
Thermoplastic Nylon Core SAE 100R7 Black Cover
Construction: Nylon-lined core tube. Spiraled or braided synthetic fiber reinforcement. Black perforated polyurethane cover. Application: General hydraulics. Material handling. Forklift. High pressure gas transfer. Chemical transfer. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Features: Long continuous lengths. Low elongation. Best value SAE 100R7 hose. Operating Temperature Range: -40F to 212F (except to 150F with water-based or fire-resistant fluids). Fittings: Synflex Swage 3903 Series (Steel) page 794 Synflex Swage 390A Series (Stainless Steel) page 825 3130
Catalog Part No. Hose Hose I.D. O.D. (in) (in) 0.19 0.25 0.38 0.50 0.43 0.51 0.67 0.82 Maximum Operating Pressure (psi) 3000 3000 2250 2000 Minimum Minimum Burst Bend Vacuum Pressure Radius Service (in/Hg) (psi) (in) 12000 12000 9000 8000 0.75 1.25 2.00 3.00 Die Part Number 4540 -303 -304 -306 -308 Wt. (per ft) 0.05 0.06 0.10 0.14 Price (per ft)
Synflex Model
Package Qty 250 ft random 250 ft random 250 ft random 250 ft random
C1HW52 3130-03003 C1HW53 3130-04003 C1HW54 3130-06003 C1HW55 3130-08003
Note: Hose may be purchased by the foot or by the roll, contact us for availability of less than full lengths of continuous length models. Also Note: SAE 100R7 specification does not apply to size -02 hose: The nylon core tube in that size is a single-wall design and is not bonded to the reinforcement.
712
Hydraulic Hose
FC373
Polyon Thermoplastic SAE 100R7 Non-conductive Orange Cover
Construction: Thermoplastic elastomer tube, single braid polyester reinforcement and an orange non-perforated polyurethane cover. Application: Hydraulic system service with petroleum, fire-resistant, water base fluids, fuel and lubricating systems. WARNING: Water glycol & water petroleum emulsion applications have a "Conditional" Fluid Compatibility rating; Contact us for determination of suitability for these applications. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -65F to +200F (-40F to +200F for flexing applications). Water applications not to exceed +150F. Fittings: Polyon Swage (Steel) page 793 Polyon Crimp (Brass) page 831 Polyon Reusable (Steel) page 809 FC373
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.19 0.44 Maximum Operating Pressure (psi) 3000 Minimum Burst Pressure (psi) 12000 Minimum Bend Radius (in) 0.75 Vacuum Service (in/Hg) Reel Qty (ft) 500 Wt. (per ft) 0.06 Price (per ft)
C1CR94 FC373-03
Fluid Conveying
37AL
Thermoplastic SAE J517 Constant Pressure Non-Conductive Orange Cover
Construction: Polyester core tube. Braided synthetic fiber reinforcement. Orange non-perforated non-stick polyurethane cover. Application: Electric utility truck hydraulic systems. Mobile equipment (Picker, Utility Vehicles). Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Features: Complies with ANSI A92.2 for vehicle mounted aerial devices. Less than 50 micro-amperes leakage when subjected to 75,000 volts/ft for 5 minutes. Flexible in low temperatures. Abrasion and UV resistant cover. Long continuous lengths. Can use both permanently attached and reusable fittings. Operating Temperature Range: -65F to 212F (except to 140F with water-based or fire-resistant fluids). Fittings: Synflex Swage 3903 Series (Steel) page 794 Synflex Swage 390A Series (Stainless Steel) page 825 37AL
Catalog Part No. Synflex Model Hose Hose I.D. O.D. (in) (in) 0.19 0.25 0.31 0.38 0.50 0.43 0.49 0.58 0.63 0.82 Maximum Operating Pressure (psi) 3000 3000 3000 3000 3000 Minimum Burst Pressure (psi) 12000 11000 10000 9000 9000 Minimum Vacuum Bend Radius Service (in/Hg) (in) 0.75 1.25 1.75 2.00 3.00 Die Part Number 4540 -303 -3W4 -305 -306 -308 Wt. (per ft) 0.05 0.06 0.08 0.10 0.14 Price (per ft)
Package Qty 250 ft random 250 ft random 250 ft random 250 ft random 250 ft random
C1HZ41 37AL-03003 C1HW61 37AL-04003 C1HZ44 37AL-05003 C1HW62 37AL-06003 C1HW63 37AL-08003
Note: Hose may be purchased by the foot or by the roll, contact us for availability of less than full lengths of continuous length models.
713
Hydraulic Hose
25CT
Thermoplastic SAE 100R7 Forklift Sheave Hose
Construction: Polymeric core tube. Braided synthetic fiber reinforcement. Black non-stick perforated polymeric cover. Application: Forklift Freezer Applications Construction General hydraulics Chemical and gas transfer Agricultural equipment Material handling Machine tools and robotics Lubrication equipment Portable hydraulic tools. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Features: Highly flexible, even in cold temperatures Small O.D. Lightweight, yet rugged construction. Operating Temperature Range: -65F to 200F. Fittings: Synflex Swage 3903 Series (Steel) page 794 Synflex Swage 390A Series (Stainless Steel) page 825 25CT
Catalog Part No. Synflex Model Hose Hose I.D. O.D. (in) (in) 0.50 0.83 Maximum Operating Pressure (psi) 2500 Minimum Burst Pressure (psi) 10000 Minimum Bend Vacuum Radius Service (in) (in/Hg) 3.00 Die Part Number 4540 -308 Wt. (per ft) 0.14 Price (per ft)
Package Qty 250 ft random
C1JM12 25CT-08003
Note: Hose may be purchased by the foot or by the roll.
Fluid Conveying
30CT
Thermoplastic SAE 100R18 Forklift Sheave Hose Constant Pressure Black Cover
Construction: Polymeric core tube. Braided synthetic fiber reinforcement. Black non-stick perforated polymeric cover. Application: Forklift. Construction. General Hydraulics. Chemical & Gas Transfer. Agricultural Equipment. Material Handling. Freezer Applications. Machine Tools & Robotics. Lubrication Equipment. Portable Hydraulic Tools. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Features: Meets or exceeds SAE 100R18. Highly flexible, even in cold temperatures. Small O.D. Lightweight yet rugged construction. Operating Temperature Range: -65F to 200F (except to 150F with water-based or fire-resistant fluids). Fittings: Synflex Swage 3903 Series (Steel) page 794 (Sizes -04 to -06), Synflex Swage 390H Series (Steel) page 797 (Size -08), Synflex Swage 390A Series (Stainless Steel) page 825 (Sizes -03 to -06). 30CT
Catalog Part No. Synflex Model Hose Hose I.D. O.D. (in) (in) 0.26 0.25 0.50 0.38 0.50 0.42 0.48 0.61 0.66 0.85 Maximum Operating Pressure (psi) 3000 3000 3000 3000 3000 Minimum Burst Pressure (psi) 12000 12000 12000 12000 12000 Minimum Bend Vacuum Radius Service (in) (in/Hg) 1.00 1.25 1.50 2.00 3.50 Die Part Number 4540 -303 -3W4 -305 -306 -A08 Wt. (per ft) 0.05 0.06 0.10 0.12 0.17 Price (per ft)
Package Qty 250 ft random 250 ft random 250 ft random 250 ft random 250 ft random
C1HZ33 30CT-03003 C1HW49 30CT-04003 C1HZ34 30CT-05003 C1HW50 30CT-06003 C1HW51 30CT-08003
714
Hydraulic Hose
FC374
Polyon Thermoplastic SAE 100R8 Black Cover
Construction: Thermoplastic elastomer tube, single braid Kevlar reinforcement and an black perforated polyurethane cover. Application: Hydraulic system service with petroleum, fire-resistant, water base fluids, pneumatic, fuel and lubricating systems. WARNING: Water glycol & water petroleum emulsion applications have a "Conditional" Fluid Compatibility rating; Contact us for a determination of suitability for these applications. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -65F to +200F. (-40F to +200F for flexing applications). Water applications not to exceed +150F. Air not to exceed +160F. Swage Fittings: Polyon Swage (Steel) page 793 FC374
Catalog Part No. C1CS14 Hose I.D. Hose Aeroquip Model (in) O.D. (in) FC374-12 0.75 1.08 Maximum Operating Pressure (psi) 2250 Minimum Burst Pressure (psi) 9000 Minimum Bend Radius (in) 8.00 Vacuum Service (in/Hg) Reel Qty (ft) Rolls Only Wt. (per ft) 0.52 Price (per ft)
Fluid Conveying
3R80
Thermoplastic High Pressure SAE 100R8 Nylon Core Black Cover
Construction: Nylon core tube. Braided synthetic fiber reinforcement. Black perforated polyurethane cover. Application: General Hydraulic Systems. Hydraulic Tools. Mobile Equipment. High Pressure Pneumatic Systems. High Pressure Chemical Transfer. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Features: Long life in impulse cycling and flexing. Designed for permanently attached or reusable fittings. Operating Temperature Range: -40F to 212F (except to 150F with water-based or fire-resistant fluids). Fittings: Synflex Swage 390H Series (Steel) page 797 3R80
Catalog Part No. Synflex Model Hose Hose I.D. O.D. (in) (in) 0.19 0.25 0.38 0.50 0.52 0.63 0.77 0.89 Maximum Operating Pressure (psi) 5000 5000 4000 3500 Minimum Burst Pressure (psi) 20000 20000 16000 14000 Minimum Bend Vacuum Radius Service (in) (in/Hg) 1.50 2.00 2.50 4.00 Die Part Number 4540 -H03 -H04 -H06 -H08 Wt. (per ft) 0.12 0.75 0.24 0.12 Price (per ft)
C1HW86 3R80-03003 C1HW87 3R80-04003 C1HW88 3R80-06003 C1HW89 3R80-08003
715
Hydraulic Hose
3800
Thermoplastic SAE 100R8 Performance SAE 100R7 Dimensions Nylon Core Black Cover
Construction: Nylon core tube. Braided high tensile Aramid fiber reinforcement. Black perforated polyurethane cover. Application: General Hydraulics. High Pressure Gas & Chemical Transfer. Machine Tools. Mobile Equipment. Agricultural Equipment. Marine Steering. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Features: 100R8 hose performance with 100R7 hose dimensions - for fitting versatility. Low volumetric expansion. Operating Temperature Range: -40F to 212F (except to 150F with water-based or fire-resistant fluids). Fittings: Synflex Swage 3903 Series (Steel) page 794 Synflex Swage 390A Series (Stainless Steel) page 825 3800
Catalog Part No. Synflex Model Hose Hose O.D. I.D. (in) (in) 0.1875 0.432 0.25 0.375 0.50 0.532 0.667 0.837 Maximum Operating Pressure (psi) 5000 5000 4000 3500 Minimum Burst Pressure (psi) 20000 20000 16000 14000 Minimum Vacuum Bend Radius Service (in/Hg) (in) 1.50 2.00 2.50 4.00 Die Part Number 4540 -303 -304 -306 -308 Wt. (per ft) 0.06 0.08 0.11 0.15 Price (per ft)
Fluid Conveying
C1HZ47 3800-03003 C1HZ48 3800-04003 C1HZ49 3800-06003 C1HZ50 3800-08003
3770
Thermoplastic Twin & Multi-Line
Construction: Most Synflex hoses can be permanently joined to form twin-line or multi-line designs. Joined hoses form a flat assembly. Features: Eliminates abrasion caused by relative movement of adjacent hoses. Flat profile is flexible and compact. Special separation tool to prevent hose damage: 4574-01000. 3770
Catalog Part No. Synflex Model Number of Hoses 2 2 2 2 Synflex Hose Model 30CT-06 (Conductive) 37AL-04 (Non-Conductive) 37AL-06 (Non-Conductive) 37AL-08 (Non-Conductive) Length (ft) 250 ft random 250 ft random 250 ft random 250 ft random Wt. (per ft) 0.24 0.12 0.19 0.29 Price (per ft)
C1HX52 3770-20C53 C1HW58 3770-27A33 C1HW59 3770-27A53 C1HZ40 3770-27A63
716
Industrial Hose
Ultraforce
Air & Multipurpose Abrasion Resistant RMA Class B Tube RMA Class B Cover Non-Marking Blue
Construction: RMA Class B non-conductive modified vinyl tube. 2-spiral textile reinforcement. RMA Class B rubber-modified non-marking pin-pricked thermoplastic cover, available in blue and red. Application: Transfer air and water. Air tools. Water supply. Robotics. Water washdown. Medium-high oil resistance. Abrasion, age, ozone resistant. Note: Factory tested to exceed minimum electrical resistivity to one megaohm per inch at 1,000 volts D.C. Note: Not for jackhammer applications. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Operating Temperature Range: -20F to 180F. Fittings & Fitting Attachment Suggestions: Shank or Universal type fittings attached with pinch clamps, preformed clamps, crimp ferrules or bolt clamps. Do NOT use internal expansion fittings. Fittings: Shank Type (Brass) page 839 Shank Type (Steel) page 843 Shank Type (Stainless Steel) page 845 Universal Type page 852 Fitting Attachment: Pinch Clamps page 856 Band-It Jr.Preformed Clamps page 864 Crimp Ferrules page 867 Bolt Clamps page 866 Branding Type: Ink Print. Ultraforce
Catalog Part No. Maximum Operating Minimum Hose I.D. Hose Pressure @ Bend Radius Reel or Roll Wt. (in) O.D. (in) 68F (psi) (in) Qty (ft) (per ft) 0.25 0.25 0.375 0.375 0.50 0.625 0.75 1.00 1.25 1.50 1/2 1/2 41/64 41/64 25/32 7/8 1-1/16 1-5/16 1-11/16 1-15/16 350 350 350 350 300 250 250 200 150 150 125 ft roll 600-700 75 ft roll 600-700 600-700 600-700 600-700 200 ft roll 100 ft roll 100 ft roll 0.22 0.35 0.61 0.73 0.09 0.09 0.12 0.12 0.17 Price (per ft)
Boston Model
Color Blue Blue Blue Blue Blue Blue Blue Blue Blue Blue
C1KM17 H26504BU-125R C1FU60 H26504BU-600R C1KM18 H26506BU-75R C1FU61 H26506BU-600R C1FU62 H26508BU-500R C1JA94 H26510BU-500R C1FU63 H26512BU-500R C1FU64 H26516BU-200R C1FU65 H26520BU-100 C1FU66 H26524BU-100
Note: Stated Maximum Operating Pressures are at 68F. Working pressure decreases as temperature increases. Temperature vs. Pressure Chart for Boston reinforced PVC hose page 1386 Note: Maximum Operating Pressure for the hose assembly (fittings attached to the hose) may be lower than the stated Maximum Operating Pressure in this table. NAHAD Pressure Guideline Chart page 1380 Note: Hose may be purchased by the foot or by the reel/roll.
717
Industrial Hose
Marathoner
Air & Multipurpose Rugged, Abrasion Resistant RMA Class B Tube RMA Class C Cover
Construction: RMA Class B blended nitrile tube. 2 or 4 spiral textile reinforcement. RMA Class C pin-pricked neoprene cover, available in red, green, yellow and black. Application: Pneumatic tools on production line. Transfer of air and water. Abrasion resistant. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Operating Temperature Range: -40F to 180F. Fittings & Fitting Attachment Suggestions: Shank or Universal type fittings attached with pinch clamps, preformed clamps or bolt clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Steel) page 843 Shank Type (Stainless Steel) page 845 Universal Type page 852 Fitting Attachment: Pinch Clamps page 856 Band-It Jr.Preformed Clamps page 864 Bolt Clamps page 866 Branding Type: Ink Print. Marathoner
Catalog Part No. Boston Model Number of Hose I.D. Hose Reinforcement Color (in) O.D. (in) Spirals Red Red Red Red Red Red 0.25 0.375 0.50 0.75 0.75 1.00 5/8 3/4 7/8 1-3/16 1-3/16 1-7/16 4 4 4 4 4 4 Maximum Operating Pressure (psi) 300 300 300 300 300 200 Minimum Wt. Bend Radius Reel Qty (in) (ft) (per ft) 600-700 600-700 600-700 600-700 -200-400 0.13 0.18 0.23 0.37 0.37 0.64 Price (per ft)
Fluid Conveying
C1FU39 H198204RD-600R C1FU40 H198206RD-600R C1FU41 H198208RD-600R C1FU42 H198212RD-600R C1FV98 H198212RD-250 Box of 5ea 50 ft. C1HV56 H198216RD-400R
Note: Maximum Operating Pressure for the hose assembly (fittings attached to the hose) may be lower than the stated Maximum Operating Pressure in this table. NAHAD Pressure Guideline Chart page 1380 Note: Reeled hose may be purchased by the foot or by the reel.
718
Industrial Hose
Sunrise Hose
Multiflex Rubber Air Hose
Construction: Blended SBR tube (oil mist resistance), smooth type blended SBR cover. Available in red and black. Application: Pneumatic tools on production line. Transfer of air and water. Applications in automobile, construction sites, mining industries among others. Operating Temperature Range: -13F to 170F. Fittings & Fitting Attachment Suggestions: Shank or Universal type fittings attached with pinch clamps, Preformed clamps or bolt clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Steel) page 843 Shank Type (Stainless Steel) page 845 Universal Type page 852 Fitting Attachment: Pinch Clamps page 856 Band-It Jr.Preformed Clamps page 864 Bolt Clamps page 866 Branding Type: Ink Print Sunrise Hose
Catalog Part No. C1KT79 C1KT86 C1KT80 C1KT87 C1KT81 C1KT88 C1KT82 C1KT89 C1KT83 C1KT90 C1KT84 C1KT91 C1KT85 C1KT92 Hose I.D. (in) 0.250 0.250 0.312 0.312 0.375 0.375 0.500 0.500 0.625 0.625 0.750 0.750 1.000 1.000 Maximum Operating Pressure @ 68F (psi) 290 290 290 290 290 290 290 290 290 290 290 290 290 290 Burst Coil Length Pressure (psi) (ft) 870 870 870 870 870 870 870 870 870 870 870 870 870 870 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Wt. (per ft) Price (per ft)
HSC Model SUNRISE-AIR-B-04 SUNRISE-AIR-R-04 SUNRISE-AIR-B-05 SUNRISE-AIR-R-05 SUNRISE-AIR-B-06 SUNRISE-AIR-R-06 SUNRISE-AIR-B-08 SUNRISE-AIR-R-08 SUNRISE-AIR-B-10 SUNRISE-AIR-R-10 SUNRISE-AIR-B-12 SUNRISE-AIR-R-12 SUNRISE-AIR-B-16 SUNRISE-AIR-R-16
Color Black Red Black Red Black Red Black Red Black Red Black Red Black Red
Hose O.D. (in) 0.511 0.511 0.590 0.590 0.375 0.375 0.826 0.826 1.000 1.000 1.140 1.140 1.417 1.417
719
Industrial Hose
Easy Couple Air & Multipurpose Uses SOCKETLESS Fittings Excellent Oil Resistant Tube Black, Red, Green, Blue
Construction: RMA Class A vinyl nitrile tube (Excellent oil resistance). 1-braid textile reinforcement. Black cover is neoprene (MSHA 2G-13). Blue, Gray, Red, Yellow and Green covers are vinyl nitrile. Application: Pneumatic tools on production line. Convey air, water, oils, etc. Transfer lubricated air to valves and cylinders. Low pressure hydraulics (NOT for impulse applications). Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Operating Temperature Range: -40F to 200F. Fittings & Fitting Attachment Suggestions: SOCKETLESS fittings (no clamp required). Shank or Universal type fittings attached with pinch clamps, preformed clamps or bolt clamps. SOCKETLESS Fittings: SOCKETLESS (Steel) page 810 (Stainless Steel) page 829 SOCKETLESS (Brass) page 834 Industrial Hose Fittings: Shank Type (Brass) page 839 Shank Type (Steel) page 843 Shank Type (Stainless Steel) page 845 Universal Type page 852 Industrial Hose Fitting Attachment: Pinch Clamps page 856 Band-It Jr.Preformed Clamps page 864 Bolt Clamps page 866 Branding Type: Ink Print. Easy Couple
Catalog Part No. Hose I.D. Hose (in) O.D. (in) 0.25 0.25 0.375 0.375 0.375 0.50 0.50 0.50 0.625 0.625 0.75 1/2 1/2 21/32 21/32 21/32 3/4 3/4 3/4 15/16 15/16 1-1/16 Maximum Operating Pressure (psi) 250 250 250 250 250 250 250 250 250 250 250 Minimum Bend Radius (in) 3.00 3.00 3.00 3.00 3.00 5.00 5.00 5.00 6.00 6.00 7.00 Reel Qty (ft) 250 250 250 250 250 250 250 250 250 250 250 Wt. (per ft) 0.08 0.08 0.13 0.13 0.13 0.15 0.15 0.15 0.20 0.26 0.26 Price (per ft)
Fluid Conveying
Boston Model
Color Black Blue Black Blue Red Black Blue Red Black Blue Black
C1FU44 H20104BK-250R C1FU45 H20104BU-250R C1FU48 H20106BK-250R C1FU49 H20106BU-250R C1FU51 H20106RD-250R C1FU52 H20108BK-250R C1FU53 H20108BU-250R C1FU55 C1FZ78 H20108RD-250R H20110BU-250R C1FU56 H20110BK-250R C1FU59 H20112BK-250R
720
Industrial Hose
2556
Air & Multi-Purpose Textile Braid Low Pressure SOCKETLESS
Construction: Synthetic rubber tube, textile braid reinforcement, black synthetic rubber cover. Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for marine fuel lines, Not recommended for hydraulic impulse applications, and is Not approved for air brake applications. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +212F. Water not to exceed +150F. Air not to exceed +160F. Reusable Fittings: SOCKETLESS (Steel) page 810 (Stainless Steel) page 829 SOCKETLESS (Brass) page 834 2556
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.25 0.38 0.50 0.63 0.75 0.49 0.62 0.75 0.97 1.09 Maximum Operating Pressure (psi) 360 300 300 250 250 Minimum Burst Pressure (psi) 1440 1200 1200 1000 1000 Minimum Bend Radius (in) 3 3 5 4.75 5.5 Vacuum Service (in/Hg) 28 28 28 10 10 Reel Qty (ft) 850 560 600 450-475 367 Wt. (per ft) 0.08 0.09 0.17 0.25 Price (per ft)
C1BH31 2556-4RL C1BH32 2556-6RL C1BH33 2556-8 C1BH29 2556-10 C1BH30 2556-12
Fluid Conveying
0.22
FC332
Air & Multi-Purpose Textile Braid Low Pressure SOCKETLESS AQP Blue
Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover. Application: For gasoline, fuel and lubricating oils, air and water. NOT recommended for marine fuel lines. NOT recommended for hydraulic impulse applications, and is NOT approved for air brake applications. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +300F. Water not to exceed +180F. Air not to exceed +250F. Reusable Fittings: SOCKETLESS (Steel) page 810 (Stainless Steel) page 829 SOCKETLESS (Brass) page 834 FC332
Catalog Part No. C1CR67 C1CR68 C1CR69 C1CR70 Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.25 0.38 0.50 0.63 0.75 0.49 0.63 0.75 0.91 1.04 FC332-06 FC332-08 FC332-10 FC332-12 Maximum Operating Pressure (psi) 250 250 250 250 250 Minimum Burst Pressure (psi) 1000 1000 1000 1000 1000 Minimum Bend Radius (in) 3 3 5 6 7 Vacuum Service (in/Hg) 28 28 28 18 18 Reel Qty (ft) 680 560 600 450-475 367 Wt. (per ft) 0.08 0.12 0.14 0.19 0.25 Price (per ft)
C1CR66 FC332-04
721
Industrial Hose
FC647
Air & Multipurpose Textile Braid Low Pressure SOCKETLESS Fire Resistant
Construction: Synthetic rubber tube, textile braid reinforcement, polyester braided cover. Application: Meets RMA/CGA flame test requirements. For gasoline, fuel and lubricating oils, air and water. NOT recommended for marine fuel lines. NOT recommended for hydraulic impulse applications, and is NOT approved for air brake applications. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +212F. Water not to exceed +150F. Air not to exceed +165F. Reusable Fittings: SOCKETLESS (Steel) page 810 (Stainless Steel) page 829 SOCKETLESS (Brass) page 834 FC647
Catalog Part No. C1HE70 Aeroquip Model FC647-10BLK Maximum Minimum Hose I.D. Hose Operating Minimum Burst Bend Radius (in) O.D. (in) Pressure (psi) Pressure (psi) (in) 0.63 0.92 250 1000 6 Vacuum Service (in/Hg) 18 Reel Qty (ft) Rolls Only Wt. (per ft) 0.16 Price (per ft)
Note: Color Code Suffix: BLK (Black), BLU (Blue), BRN (Brown), GRN (Green), WHT (White).
Fluid Conveying
Blacksnake
Petroleum Dispensing
Construction: Black Buna-N tube. Braided, high tensile steel wire reinforcement. Black modified nitrile cover. Application: Dispensing diesel fuel from service station pumps. A heavy duty hard wall hose which does not collapse in reel use or behind the nozzle in heavy duty service. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Operating Temperature Range: -40F to 120F continuous service. (Fuels listed normally conveyed below 120F). Fitting & Fitting Attachment Suggestions: Permanent Internal Expansion fittings for gas pump hose. Blacksnake
Catalog Part No. Gates Model Hose I.D. Hose Maximum Operating (in) O.D. (in) Pressure (psi) 1.00 1.38 150 Minimum Bend Radius (in) 8 Vacuum Service (in/Hg) 30 Reel Qty (ft) 500 Wt. (per ft) Price (per ft)
C1HP49 3624-0003
722
Industrial Hose
Super-Vac
Petroleum Transfer Tank Truck Service Oil, Water, Mud, Diesel Fuel Black / Blue Stripe
Construction: Specially compounded black elastomer tube. Synthetic, high tensile reinforcement with wire helix. Black SBR (styrene butadiene) cover with blue spiral stripe. Application: Tank truck service where full suction or rated working pressures are required. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Caution: NOT RECOMMENDED FOR REFINED PRODUCTS SUCH AS GASOLINE. Operating Temperature Range: -40F to 150F. (Diesel fuel normally conveyed below 120F). Fitting & Fitting Attachment Suggestions: Malleable iron Pin Lug Shank Type fittings or steel Combination Nipple Shank Type fittings. Fittings: Combination Nipples (Steel) page 843 Super-Vac
Catalog Part No. Gates Model Hose I.D. Hose Maximum Operating (in) O.D. (in) Pressure (psi) 1.0 1.25 1.50 2 2.5 3 1.38 1.65 1.97 2.47 2.99 3.53 150 150 150 150 150 150 Minimum Bend Radius (in) 3 3 3 4 5 6 Vacuum Service (in/Hg) 30 30 30 30 30 30 Wt. Pkg Qty (ft) (per ft) 100 100 100 100 100 100 0.52 0.67 Price (per ft)
C1BQ67 4688-0651 C1BQ68 4688-0653 C1BQ69 4688-0656 C1BQ70 4688-0665 C1BQ71 4688-0675 C1EV91 4688-0680
Fluid Conveying
0.77 0.99 1.46 2.00
Note: Maximum Operating Pressure for the hose assembly (fittings attached to the hose) may be lower than the stated Maximum Operating Pressure in this table. NAHAD Pressure Guideline Chart page 1380 Note: May be purchased by the package or by the foot.
723
Industrial Hose
SF-10
PVC Water Discharge Lay Flat - Standard Duty Blue
Construction: PVC tube and cover. 3-Ply polyester yarns. Both tube and cover are extruded simultaneously to obtain maximum bonding. Application: Mines, Construction, Irrigation, etc. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Operating Temperature Range: -5F to 170F. CAUTION: If temperature exceeds 110F the working pressure will go down. Fitting & Fitting Attachment Suggestions: Aluminum, malleable iron or brass shank type fittings attached with preformed clamps. Cam & Groove type fittings attached with preformed clamps. Fittings: Shank Type (Aluminum) page 846 Shank Type (Steel) page 843 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Cam & Groove (Aluminum) page 847 Cam & Groove (Polypropylene) page 850 Fitting Attachment: Band-It Jr.Preformed Clamps page 864 SF-10
Catalog Part No. C1GC35 Nominal Size (in) 1-1/2 Apprx. Wall Apprx. O.D. I.D. (in) (in) (in) 1.61 0.059 1.728 Maximum Operating Pressure @ 70F (psi) 80 Minimum Burst Pressure (psi) 240 Pkg Qty (ft) 300 Wt. (per ft) 0.19 Price (per ft)
Fluid Conveying
Sun-Flow Model SF10-01.50
Note: Stated Maximum Operating Pressures are at 70F. Working pressure decreases as temperature increases above 110F. Note: Maximum Operating Pressure for the hose assembly (fittings attached to the hose) may be lower than the stated Maximum Operating Pressure in this table. NAHAD Pressure Guideline Chart page 1380 Note: Hose may be purchased by the foot or by the package.
724
Industrial Hose
Vinylflow EZ-Lite
PVC Water Discharge Layflat Blue
Construction: Features a balanced polyester yarn spiral wrap, longitudinal strength member and homogeneous PVC tube and cover to prevent separation. Application: A general purpose PVC water discharge hose. Operating Temperature Range: -5F to 170F. Fitting & Fitting Attachment Suggestions: Aluminum, malleable iron or brass shank type fittings attached with preformed clamps. Cam & Groove type fittings attached with preformed clamps. Fittings: Shank Type (Aluminium) page 846 Shank Type (Steel) page 940 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Cam & Groove (Aluminium) page 847 Cam & Groove (Polypropylene) page 850 Fitting Attachment: Band-It Jr.Preformed Clamps page 864 Vinylflow EZ-Lite
Catalog Part No. C1KN70 C1KN71 C1KN72 Kuriyama Model VFL200X300 VFL300X300 VFL600X300 Size (in) 2 3 6 Hose I.D. 2.087 3.071 6.102 Apprx. Wall (in) 0.048 0.055 0.061 Working Pressure (psi) 65 60 40 Coil Length (ft) 300 300 300 Wt. (per ft) 0.15 0.15 0.35 Price (per ft)
725
Industrial Hose
Tigerflex JG
Water Suction & Discharge PVC, Green
Construction: Solid olive green PVC body. Rigid thermoplastic helix reinforcement. Application: General purpose suction and transfer applications in construction and mining. Irrigation lines, rock dusting, wellpoint systems, agri-foam systems, liquid fertilizer transfer. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Operating Temperature Range: -4F to 150F. (Actual service temperature range is application-dependent). Fitting & Fitting Attachment Suggestions: Cam & Groove or Shank Type fittings attached with preformed clamps (except for 6 inch and 8 inch sizes). NOTE: 6 inch and 8 inch I.D. sizes have a convoluted cover for greater flexibility. Preformed clamps will not work with these two sizes. For these two sizes, use TigerClamp Spiral Double Bolt Clamps page 866 Fittings: Shank Type (Aluminum) page 846 Shank Type (Steel) page 843 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Cam & Groove (Aluminum) page 847 Cam & Groove (Polypropylene) page 850 Fitting Attachment: Band-It Jr.Preformed Clamps page 864 Tigerflex JG
Maximum Maximum Operating Operating Vacuum Vacuum Pressure Pressure Rating @ Rating @ Minimum Hose I.D. Hose @ 68F @ 104F 68F 104F Wt. Bend Radius Pkg Kuriyama Model (in) O.D. (in) (psi) (psi) (in/Hg) (in/Hg) @ 68F (in) Qty (ft) (per ft) 1.50 2.00 3.00 4.00 6.00 1.83 2.32 3.43 4.50 6.75 70 65 60 50 40 50 45 40 35 25 28 28 28 28 28 24 24 22 22 20 5 7 10 15 30 100 100 100 100 100 0.48 0.66 1.24 1.85 0.96
Fluid Conveying
Catalog Part No.
Price (per ft)
C1GD15 JG150X100 C1GD16 JG200X100 C1GD17 JG300X100 C1GD18 JG400X100 C1GE15 JG600X100
Note: Working pressure decreases as temperature increases. Hose may be purchased by the foot or by the package. Note: Maximum Operating Pressure for the hose assembly (fittings attached to the hose) may be lower than the stated Maximum Operating Pressure in this table. NAHAD Pressure Guideline Chart page 1380
726
Marine Hose
Marine Wet Exhaust Hose, Bellows & Elbows
Trident Marine Wet Exhaust Hose, Bellows & Elbows SAE J2006 Standard Compliance & Labeling
Only TRIDENT meets marine wet exhaust standard SAE J2006 with the full range of flexible exhaust hose, bellows and elbows. SAE J2006 compliance & labeling is now required for USA boat certification & surveys. Features & Benefits: Marine design of heavy-wall construction and best rubber & silicone formulations solves the tough marine exhaust problems, including compliance with ABYC, NMMA & ISO (draft) exhaust standards Greatest heat & aging resistance - Silicone up to 500F with 6 times longer life than most rubber products Excellent flexibility & tight bend radius designs for easier and better installations - Solves misalignment, obstruction & space problems with less labor, parts and cost Smooth interior surface & bend arcs - Reduces engine back pressure, improves performance Maximum absorption of engine movement, vibration & noise Smoother, quieter operation Glossy blue silicone is the yacht exhaust standard - Enhances engine room appearance. BLACK HT (Hi Temp): EPDM rubber. 250F maximum continuous. 5 year warranty. Blue VHT (Very Hi Temp): Silicone rubber. 350F maximum continuous. 10 year warranty. Red XHT (Xtra Hi Temp): Silicone rubber. 500F maximum continuous. 10 year warranty. Applications: Molded products (certain Hump Hoses and Elbows) are for use in Wet Exhaust systems only. Reinforced products (certain Hump Hoses and Elbows, plus Wet Exhaust hoses), may be used in both Wet Exhaust and Engine Coolant systems, up to rated working pressure of the component. Installation: Do not damage or kink. Install far enough downstream from the point of wet exhaust system water injection so that the maximum continuous operating temperature at it's location does not exceed that of the component. Install over rigid tubing or pipe with reasonable overlap (May lubricate with water and/or detergent not oil or grease). Each rubber component requires a minimum of 2 stainless steel clamps (1/2 inch wide minimum) at each end. Recommended clamps are 3/4 inch wide T-Bolt Clamps and 5/8 inch wide Constant Torque Clamps. All components should be supported and strapped the entire length of the system. Operation: In case of backfire, visually inspect the entire wet exhaust system for damage, leaks or separated connections. Recommended Clamps: Trident #720 S.S. T-Bolt Clamps page 860 Trident #730 S.S. Constant-Torque Clamps page 863 Double Clamping is recommended.
727
Marine Hose
Trident #250 Hardwall Wet Exhaust Hose Black HT (Hi Temp) EPDM Rubber
Application & Construction: Premium wet exhaust hose for longer bent connections. Black HT (High Temp) EPDM Rubber. Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sanitation chemicals, panting and collapse. Exceeds new SAE J2006, ABYC and NMMA standards. ISO 13363 standard pending. Black with blue stripe. Maximum Continuous Temperature: 250 F. Trident #250 Hardwall Wet Exhaust Hose Black HT (Hi Temp) EPDM Rubber
Catalog Part No. C1FT29 C1FT31 C1FT30 C1FT33 C1FT35 Trident Marine Model 250-1124 250-1584 250-1344 250-2004 250-2384 250-2124 250-2784 250-3004 250-6004 Hose I.D. Hose (in) O.D. (in) 1.50 1.625 1.75 2.00 2.25 2.375 2.50 2.875 3.00 6.00 3.50 6.70 57 51 8.00 2.875 3.10 68 65 2.00 2.125 2.25 2.50 Maximum Operating Pressure (psi) 57 54 54 47 5.50 Minimum Bend Radius (in) 4.25 Vacuum Service (in/Hg) Wt. (per ft) 0.61 0.75 0.81 0.95 1.28 1.09 1.15 24.96 1.79 4.48 Price (per ft)
Standard Package 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT
C1GB19 250-2144 C1FT34 C1GB22 C1FT36 C1FT40
Fluid Conveying
Double Clamping Recommended: Trident #720 S.S. T-Bolt Clamps page 860 Trident #730 S.S. Constant-Torque Clamps page 863 Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery.
Trident #252 Corrugated Hardwall Wet Exhaust Hose Black HT (Hi Temp) EPDM Rubber
Application & Construction: Premium corrugated marine wet exhaust hose for longer connections with substantial bends. Black HT (High Temp) EPDM rubber. Thick tube and cover with wire helix between 2 ply reinforcement. Exceptional flexibility and bend radius. Resists heat, ozone, exhaust fumes, panting and collapse. Exceeds new SAE J2006, ABYC and NMMA standards. ISO 13363 standard pending. Black with blue stripe. Maximum Continuous Temperature: 250 F. Trident #252 Corrugated Hardwall Wet Exhaust Hose Black HT (Hi Temp) EPDM Rubber
Catalog Part No. C1FT42 C1FT43 C1FT44 Trident Marine Model 252-1124 252-2004 252-3004 Hose I.D. Hose (in) O.D. (in) 1.50 2.00 3.00 2.00 2.50 3.60 Maximum Operating Pressure (psi) 48 48 60 Minimum Bend Radius (in) 4.00 5.25 7.50 Vacuum Service (in/Hg) Wt. (per ft) 0.75 0.94 1.54 Price (per ft)
Standard Package 12-1/2 FT 12-1/2 FT 12-1/2 FT
728
Marine Hose
Trident #200 Softwall Wet Exhaust Hose Black HT (Hi Temp) EPDM Rubber
Application & Construction: Premium marine wet exhaust hose for short, straight connections. Black HT (High Temp) EPDM rubber. Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sanitation chemicals. Exceeds new SAE J2006, ABYC and NMMA standards. ISO 13363 standard pending. Black with blue stripe. Maximum Continuous Temperature: 250 F. Trident #200 Softwall Wet Exhaust Hose Black HT (Hi Temp) EPDM Rubber
Catalog Part No. Trident Marine Model Hose I.D. Hose (in) O.D. (in) 1.50 2.00 2.50 2.75 3.00 4.00 3.68 4.50 51 54 2.60 3.10 50 51 Maximum Operating Pressure (psi) Minimum Bend Radius (in) Vacuum Service (in/Hg) Wt. (per ft) 0.89 0.66 1.37 1.61 2.13 Price (per ft)
Standard Package 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT 12-1/2 FT
C1GA97 200-1124 C1FS98 200-2004 C1FS99 200-2124 C1GB14 200-2344 C1FT11 C1FT13 200-3004 200-4004
Fluid Conveying
Trident #202V Silicone Wet Exhaust Hose Blue VHT (Very Hi Temp) Silicone Rubber
Application & Construction: Ultimate quality silicone marine wet exhaust and water hose. Blue VHT (Very High Temp) silicone rubber with 4 to 6 ply polyester reinforcement. Dramatically exceeds SAE J2006, ABYC and NMMA standards. Blue with white stripe. Maximum Continuous Temperature: 350 F. Trident #202V Silicone Wet Exhaust Hose Blue VHT (Very Hi Temp) Silicone Rubber
Catalog Part No. C1FT16 C1FT17 C1FT20 C1FT21 C1FT22 Trident Marine Model 202V1004 202V1124 202V4000-36 202V6000-36 202V8000-36 Hose I.D. Hose (in) O.D. (in) 1.00 1.50 3.00 4.00 5.00 6.00 8.00 1.40 1.90 3.40 4.40 5.40 6.50 8.50 20 20 35 Maximum Operating Pressure (psi) 90 80 Minimum Bend Radius (in) Vacuum Service (in/Hg) Wt. (per ft) 0.38 0.60 1.20 1.80 1.90 2.80 3.80 Price (per ft)
Standard Package 12 FT 12 FT 3 FT 3 FT 3 FT 3 FT 3 FT
C1GD32 202V3000-36 C1HN56 202V5000-36
Double Clamping Recommended: Trident #720 S.S. T-Bolt Clamps page 860 Trident #730 S.S. Constant-Torque Clamps page 863 Note: Hose stocked in 12 ft lengths may be purchased cut in 2 ft multiples. Hose stocked in 3 ft lengths is available as a full 3 ft length. Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery.
729
Marine Hose
Trident #252V Corrugated Silicone Wet Exhaust Hose Blue VHT (Very Hi Temp) Silicone Rubber
Application & Construction: Ultimate quality corrugated silicone marine wet exhaust and water hose for longer connections with substantial bends. Blue VHT (Very High Temp) silicone rubber. Thick tube and cover with wire helix between 2 ply reinforcement Dramatically exceeds SAE J2006, ABYC and NMMA standards. Blue with white stripe. Maximum Continuous Temperature: 350 F. Trident #252V Corrugated Silicone Wet Exhaust Hose Blue VHT (Very Hi Temp) Silicone Rubber
Catalog Part No. C1FT45 C1FT46 C1FT47 C1FT48 C1FT49 C1FT50 Trident Marine Model 252V0344 252V1004 252V1124 252V2004 252V2124 252V3004 Hose I.D. Hose (in) O.D. (in) 0.75 1.00 1.25 1.50 2.00 2.50 3.00 1.25 1.50 1.75 2.00 2.60 3.10 3.60 Maximum Operating Pressure (psi) Minimum Bend Radius (in) Vacuum Service (in/Hg) Wt. (per ft) 0.29 0.33 6.70 0.60 0.80 0.90 1.20 Price (per ft)
Standard Package 12 FT 12 FT 12 FT 12 FT 12 FT 12 FT 12 FT
C1GL19 252V1144
Fluid Conveying
Double Clamping Recommended: Trident #720 S.S. T-Bolt Clamps page 860 Trident #730 S.S. Constant-Torque Clamps page 863 Note: Hose stocked in 12 ft lengths may be purchased cut in 2 ft multiples. Hose stocked in 3 ft lengths is available as a full 3 ft length. Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery.
Trident Wet Exhaust Hump Hose Bellows Black HT - Blue VHT - Red XHT
Application & Construction: EPDM Rubber & silicone rubber Hump Hose Bellows provide the ultimate flexible straight connectors for marine wet exhaust systems. They offer increased tolerance to heat, misalignment, movement and vibration, while reducing installed cost, back pressure and noise. Maximum Continuous Temperature: See table below. Note: Molded models (see table below) are for wet exhaust systems only. Reinforced models may be used in both wet exhaust and engine coolant systems up to the rated working pressure of the component.
Trident Wet Exhaust Hump Hose Bellows Black HT - Blue VHT - Red XHT Indexes & Technical Information
Catalog Trident Hose I.D. Construction & Max Length Part No. Marine Model (in) Continuous Temp Humps (in) C1FV11 THH3SS C1GM66 272V3000SS C1FT52 272V4000SS 3.00 3.00 4.00 Molded HT EPDM 250F Single 5.25 6.00 6.00 Hump Minimum O.D. Clampable Clampable Clamps (in) O.D. (in) Length (in) Included 4.50 3.50 3.40 4.40 2.00 Yes Yes Yes Wt. 2.00 1.25 2.00 Price Each
Reinforced VHT Blue Single Silicone 350F Reinforced VHT Blue Single Silicone 350F
Note: Models with "SS" at end of model number come packaged with 4 Trident Marine #720 Series all-stainless steel T-Bolt clamps. Double Clamping Recommended: Trident #720 S.S. T-Bolt Clamps page 860 Trident #730 S.S. Constant-Torque Clamps page 863 Note: Other sizes and models are readily available from Trident. Please contact us for pricing and delivery.
730
Marine Hose
Trident Wet Exhaust Elbows Black HT - Blue VHT - Red XHT

Application & Construction: EPDM Rubber & silicone rubber Elbows provide the ultimate flexible angled connectors for marine wet exhaust systems. They offer increased tolerance to heat, misalignment, movement and vibration, while reducing installed cost, back pressure and noise. Maximum Continuous Temperature: See table below. Note: Molded models (see table below) are for wet exhaust systems only. Reinforced models may be used in both wet exhaust and engine coolant systems up to the rated working pressure of the component. Trident Wet Exhaust Elbows Black HT - Blue VHT - Red XHT
Catalog Trident Hose I.D. Part No. Marine Model (in) C1FV18 TRL290SS C1FT61 292V2000SS C1FV19 TRL345SS C1FV22 TRL390SS C1FT57 290V3000SS C1FV20 TRL3545SS C1FV21 TRL3590SS C1FT25 C1FV25 240V4000SS TRL545SS C1FV24 TRL490SS C1FV27 TRL645SS 2.00 2.00 3.00 3.00 3.00 3.50 3.50 4.00 4.00 5.00 6.00 Angle 90 90 45 90 90 45 90 45 90 45 45 Construction & Max Continuous Temp Molded HT EPDM 250F Reinforced VHT Blue Silicone 350F Molded HT EPDM 250F Molded HT EPDM 250F Molded VHT Blue Silicone 350F Molded HT EPDM 250F Molded HT EPDM 250F Molded VHT Blue Silicone 350F Molded HT EPDM 250F Molded HT EPDM 250F Molded HT EPDM 250F Minimum Clampable Clampable Clamps O.D. (in) Length (in) Included 2.40 2.40 3.50 3.50 3.50 4.00 4.00 4.50 4.50 5.50 6.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.62 2.00 1.75 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Wt. 1.50 1.50 3.00 3.00 2.00 2.50 Price Each
3.50 2.00 4.00 4.00 5.00
Note: Models with "SS" at end of model number come packaged with 4 Trident Marine #720 Series all-stainless steel T-Bolt clamps. Double Clamping Recommended: Trident #720 S.S. T-Bolt Clamps page 860 Trident #730 S.S. Constant-Torque Clamps page 863 Note: Other sizes and models are readily available from Trident. Please contact us for pricing and delivery.
731
Marine Hose
Trident #365 Barrier Lined Type A1-15 Fuel Hose USCG Type A1 - SAE J1527
Features: Premium Type A1 fuel line hose. Barrier liner is on inside of tube so fuel is not in direct contact with nitrile rubber tube. This provides extraordinary resistance to aging and permeation by all marine fuels including alcohol blends. 2 spiral polyester reinforcement provides maximum working pressure, excellent flexibility and bend radius. Nitrile blend cover provides excellent resistance to fire and heat, cold, ozone and fuel aging. Perfect for all fuel line applications (feed/supply, return, transfer, vent) on all marine engine systems (Inboard, I/O Stern Drives, Gen Sets and Outboards), under all newest marine standards (USCG Type A1, SAE J1527, ISO 7840 A1, ABYC H-24 & H-33, NMMA Type Accepted, CE Certified). Hose I.D. sizes conform to ISO nominal bores and tolerances. Black with red stripe and white letters. Construction: Nylon Internal Barrier, NBR Tube; NBR/PVC Blend Cover; Polyester 2 spiral Reinforcement Temperature Range: -20 F to 212 F Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel pinch clamps, stainless steel worm gear clamps or brass crimp ferrules. Fittings: Shank Type (Brass) page 839 Shank Type (Stainless Steel) page 845 Fitting Attachment: Pinch Clamps page 856 Worm Gear Clamps page 855 Crimp Ferrules page 867 Trident #365 Barrier Lined Type A1-15 Fuel Hose USCG Type A1 - SAE J1527
Catalog Part No. C1FT67 C1FT71 C1FT72 C1FT69 C1FT70 C1GL26 Trident Marine Model 365-0146 365-0566 365-0567 365-0386 365-0387 365-0380 365-0126 365-0127 365-0586 365-0587 Hose I.D. Hose (in) O.D. (in) 0.250 0.312 0.312 0.375 0.375 0.375 0.500 0.500 0.625 0.625 0.536 0.611 0.611 0.681 0.681 0.681 0.821 0.821 1.000 1.000 Maximum Operating Pressure (psi) 100 100 100 100 100 100 100 100 75 75 Minimum Bend Radius (in) 2.50 2.50 2.50 2.50 2.50 2.50 4.50 4.50 4.50 4.50 Winzeler Crimp Ferrule C1BZ37 C1BZ38 C1BZ38 C1BZ40 C1BZ40 C1BZ40 C1BZ44 C1BZ44 C1BY67 C1BY67 Wt. (per ft) 0.16 0.18 0.18 0.21 0.21 0.21 0.25 0.25 0.36 0.36 Price (per ft)
Fluid Conveying
Standard Package 50 ft reel box 50 ft reel box 100 ft reel box 50 ft reel box 100 ft reel box 600 ft reel 50 ft reel box 100 ft reel box 50 ft reel box 100 ft reel box
C1FT65 C1FT66 C1FT73 C1FT74
Note: Hose in 100 ft Reel Box is sold by the foot or by the box. Hose in 50 ft Reel Box is sold by the box. Winzeler Crimp Ferrules: Crimp Ferrules page 867
732
Marine Hose
Aeroquip FC234 Type A1 Fuel Hose Blue Cover USCG Type A1 - SAE J1527
Construction: AQP elastomer tube, brass plated steel wire reinforcement, braided refractory insulation and blue AQP elastomer cover. Application: Diesel fuel, gasoline, hot lube oil and water. A superior hose for marine fuel systems. Meets SAE J1527 Type A1 (Flame resistant, increased permeation resistance). FC234 is an SAE J1942-1 (May 2002) qualified hose for marine fuel lines, no firesleeve required. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +300F. Reusable Fittings: Reduced Bore (Steel) page 800 Reduced Bore (Stainless Steel) page 829 Reduced Bore (Brass) page 833 Aeroquip FC234 Type A1 Fuel Hose Blue Cover USCG Type A1 - SAE J1527
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.25 0.31 0.41 0.50 0.62 0.88 0.58 0.68 0.76 0.94 1.08 1.24 Maximum Operating Pressure (psi) 1500 1500 1250 1250 750 400 Minimum Burst Pressure (psi) 6000 6000 5000 5000 3000 1600 Minimum Bend Radius (in) 1.0 1.25 1.75 2.25 2.75 3.5 Vacuum Service (in/Hg) 28 28 28 28 20 16 Reel Qty (ft) 410-540 310-400 449-590 310-400 230-300 180-230 Wt. (per ft) 0.22 0.25 0.30 0.45 0.48 0.51 Price (per ft)
C1CR20 FC234-05 C1CR21 FC234-06 C1CR22 FC234-08 C1CR23 FC234-10 C1CR24 FC234-12 C1CR25 FC234-16
Fluid Conveying
Trident #327 Type A2 Fuel Fill Hose USCG Type A2 - SAE J1527
Application & Construction: Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends) and diesel (including bio diesel blends). The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order and EPA Certified low permeation Type A1-15; and is NMMA Type Accepted & CE certified. This hose is built with the best fuel, fire and age resistant formulation and a unique "Barrier Liner" on inside surface of the tube, so fuel is not in direct contact with rubber. Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone. Also provides excellent bend-ability. Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel T-Bolt clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Fitting Attachment: Trident #720 S.S. T-Bolt Clamps page 860 Trident #327 Type A2 Fuel Fill Hose USCG Type A2 - SAE J1527
Catalog Part No. C1FT62 C1FT63 C1FT64 Trident Marine Model 327-0346 327-1126 327-2006 Hose I.D. (in) 0.75 1.00 1.50 2.00 Hose O.D. Maximum Operating Minimum Bend Radius Pressure (psi) (in) (in) 1.20 1.42 2.00 2.50 100 80 60 50 2.50 3.00 5.50 7.00 Vacuum (in/Hg) Standard Package 50 ft roll 50 ft roll 50 ft roll 50 ft roll Wt. (per ft) 0.50 0.48 0.70 0.90 Price (per ft)
C1GH48 327-1006
Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery. Note: Hose may be purchased by the foot or by the roll.
733
Marine Hose
Trident #144 Heavy Duty Bilge-Drain-Live Well Hose

Application & Construction: Heavy duty bilge, drain and live well hose. Corrugated clear vinyl (see thru) with black hard PVC helix and smooth tube. Exceptional flexibility and bend radius. NOT RECOMMENDED FOR BELOW WATERLINE THRU-HULL CONNECTIONS. No cuffs required (Even though the O.D. of this hose is not smooth, clamping without cuffs has proven to be successful with this hose style). Clear with black helix. Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel T-Bolt clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Fitting Attachment: Trident #720 S.S. T-Bolt Clamps page 860 Trident #144 Heavy Duty Bilge-Drain-Live Well Hose
Catalog Part No. Trident Marine Model Hose I.D. Hose (in) O.D. (in) 1.50 1.79 Maximum Operating Pressure (psi) 50 Minimum Bend Radius (in) Vacuum Service (in/Hg) Wt. (per ft) 0.40 Price (per ft)
Standard Package 50 ft reel box
C1FS82 144-1126
Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery. Note: Hose may be purchased by the foot, by the roll or by the reel box.
Fluid Conveying
Trident #147 Extra Heavy Duty Bilge-Live Well Hose

Application & Construction: Smooth extra heavy wall vinyl hose. All clear (see thru) with black helix. Excellent durability, flexibility and bend radius for extra heavy duty bilge, live well, drain, scupper lines, etc. No cuffs required. Operating temperatures 10F to 140F. Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel T-Bolt clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Fitting Attachment: Trident #720 S.S. T-Bolt Clamps page 860 Trident #147 Extra Heavy Duty Bilge-Live Well Hose
Catalog Part No. Trident Marine Model Hose I.D. Hose (in) O.D. (in) 1.00 1.125 1.375 95 Maximum Operating Pressure (psi) Minimum Bend Radius (in) Vacuum Service (in/Hg) Standard Package 50 ft reel box 50 ft reel box Wt. (per ft) 0.24 0.28 Price (per ft)
Color Clear, black helix Clear, black helix
C1FS86 147-1006 C1FS88 147-1186
Note: Double Clamping is recommended for below water line connections. Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery. Note: Hose may be purchased by the foot or by the reel box.
734
Marine Hose
Trident #101 Premium Sanitation Hose Head & Holding Tank

Application & Construction: Premium sanitation hose for all head and holding tank applications. Extra thick tube and cover specially compounded for maximum resistance to odor permeation and winterizing with anti freeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. Longest odor-free performance on the market, but self draining installations are still recommended. NOT for potable water. Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel T-Bolt clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Fitting Attachment: Trident #720 S.S. T-Bolt Clamps page 860 Trident #101 Premium Sanitation Hose Head & Holding Tank
Catalog Hose I.D. Hose Part No. Trident Marine Model (in) O.D. (in) C1FS61 101-1126 C1GM69 101-1786-TRIDENT 1.50 1.875 2.08 Maximum Operating Pressure (psi) Minimum Bend Radius (in) Vacuum Service (in/Hg) Wt. (per ft) 0.60 0.80 Price (per ft)
Standard Package 50 ft roll 50 ft roll
Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery. Note: Hose may be purchased by the foot or by the roll.
Fluid Conveying
Trident #148 Extra Heavy Duty Sanitation Hose - FDA Sanitation - Potable Water - Critical Bilge - Scupper - Live Well
Application & Construction: Extra heavy duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and FDA potable water fill. Also for critical bilge, drain scupper, live well, etc. Hard PVC helix gives good flexibility and bend radius. No cuffs required. NOT for use with alcohols, anti freeze, petro-chemicals or solvents. Operating temperatures 10F to 140F. White. Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel T-Bolt clamps (Stainless steel worm gear clamps may be used for smaller sizes where T-Bolt style is not available). Fittings: Shank Type (Brass) page 839 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Fitting Attachment: Trident #720 S.S. T-Bolt Clamps page 860 Worm Gear Clamps page 855 Trident #148 Extra Heavy Duty Sanitation Hose - FDA Sanitation - Potable Water - Critical Bilge - Scupper - Live Well
Catalog Part No. Trident Marine Model Hose I.D. Hose (in) O.D. (in) 0.75 1.00 1.00 1.25 Maximum Operating Pressure (psi) 105 100 Minimum Bend Radius (in) Vacuum Service (in/Hg) Wt. (per ft) 0.19 0.24 Price (per ft)
Standard Package 50 ft reel box 50 ft reel box
C1FS89 148-0346 C1FS91 148-1006
Note: Double Clamping is recommended for below water line connections. Note: Hose may be purchased by the foot or by the reel box.
735
Marine Hose
Trident #100 Hardwall Water Hose Engine Intake - Critical Water - Drain - Scupper
Application & Construction: Premium water hose for engine intake, critical water, drain, scupper, bilge and sanitation uses. Black Hi Temp EPDM rubber rated to 250F. Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sanitation chemicals, panting and collapse. Exceeds new SAE J2006, ABYC and NMMA standards. ISO 13363 Standard pending. Black with blue stripe. Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel T-Bolt clamps (Stainless steel worm gear clamps may be used for smaller sizes where T-Bolt style is not available). Fittings: Shank Type (Brass) page 839 Shank Type (Brass) page 842 Shank Type (Stainless Steel) page 845 Fitting Attachment: Trident #720 S.S. T-Bolt Clamps page 860 Worm Gear Clamps page 855 Trident #100 Hardwall Water Hose Engine Intake - Critical Water - Drain - Scupper
Catalog Part No. Trident Marine Model Hose I.D. Hose Maximum Operating (in) O.D. (in) Pressure (psi) 0.75 1.00 1.18 98 78 Minimum Bend Radius (in) 2.25 3.00 Vacuum (in/Hg) Standard Package 50 ft roll 50 ft roll Wt. (per ft) 0.29 0.38 Price (per ft)
C1FS56 100-0346 C1FS59 100-1006
Fluid Conveying
Note: Double Clamping is recommended for below water line connections. Note: Other sizes and lengths are readily available from Trident. Please contact us for pricing and delivery. Note: Hose with 50 ft roll standard package may be purchased by the foot or by the package. Hose with 12-1/2 ft standard package may be purchased by the package.
Clear PVC Hose - Non-Toxic FDA Un-pressurized Potable Water - Drain - Vent
Application & Construction: Food Transfer, Drain Lines, Light Vacuum Lines, Sight Gauges. Temperature Range 25F to 150F. Materials comply with FDA Specifications. NSF Certified under Standard NSF-51. Clear PVC Tube. Light Weight, Non-Marking & Flexible. Self Extinguishing. RoHS compliant. Special packaging, cut lengths available. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel pinch clamps or stainless steel worm gear clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Stainless Steel) page 845 Fitting Attachment: Pinch Clamps page 856 Worm Gear Clamps page 855 Clear PVC Hose - Non-Toxic FDA Un-pressurized Potable Water - Drain - Vent
Catalog Part No. C1JZ57 Eaton Model 10-0810-00 I.D. (in) O.D. (in) 0.500 0.750 1.000 0.625 1.000 1.250 Maximum Working Pressure (psi) @ 68 deg.F 30 35 25 Pkg Qty (ft) 100 100 100 Wt. (per ft) 0.06 0.02 0.02 Price (per ft)
C1KA33 10-1216-00 C1KA38 10-1620-00
Note: Non-Reinforced PVC Tubing may be purchased by the package.
736
Marine Hose
Reinforced Standard Duty PVC Hose - Non-Toxic FDA Pressurized Potable Water
Application & Construction: Materials comply with FDA Specifications. NSF Certified under Standard NSF-51 plastic materials and components for use in food equipment. Non-toxic. White spiraled polyester yarn reinforcement. Longitudinally reinforced with Blue Tracer Yarn to reduce elongation under pressure. Clear PVC tube with clear PVC cover. Light weight, Non-marking, flexible. Self Extinguishing. Silicone-free. Non-conductive. Compund hardness 75 Durometer, Shore A. RoHS compliant. Air lines, air breathing lines, water lines, deionized, pure or distilled water, food & beverage dispensing, potable water transfer, light vacuum lines, pneumatics, mild chemical resistance (call for details). Please review important safety & application information starting on NAHAD Pressure Guideline Chart page 1380 Fittings & Fitting Attachment Suggestions: Shank type fittings attached with stainless steel pinch clamps or stainless steel worm gear clamps. Fittings: Shank Type (Brass) page 839 Shank Type (Stainless Steel) page 845 Fitting Attachment: Pinch Clamps page 856 Worm Gear Clamps page 855 Reinforced Standard Duty PVC Hose - Non-Toxic FDA Pressurized Potable Water
Catalog Part No. Eaton Model I.D. (in) O.D. (in) 0.38 0.60 Maximum Working Pressure (psi) @ 68 deg.F 225 Pkg Qty (ft) 300 Wt. (per ft) 0.09 Price (per ft)
C1KB35 20-0600-00
Fluid Conveying
Note: Hose may be purchased by the foot or by the package.
Trident MSH Marine Steering Hose

Construction: Polymeric core tube, fiber braid reinforcement, abrasion-resistant urethane cover. Black, non-perforated cover. All layers bonded for optimum kink resistance and flexibility. Application: Marine steering hose provides flexibility and low volumetric expansion for rapid, accurate hydraulic response. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to 212F except limited to 135F for synthetic hydraulic fluids and water-based fluids. Fittings: Crimp (Brass) page 832 Reusable (Brass) page 837 Trident MSH Marine Steering Hose
Catalog Part No. Trident Marine Model Hose I.D. Hose (in) O.D. (in) 0.3125 0.375 0.48 0.59 Maximum Operating Pressure (psi) 1000 1000 Minimum Burst Pressure (psi) 4000 4000 Minimum Bend Radius (in) 2.25 3.0 Vacuum Service (in/Hg) Reel Qty (ft) 600 ft reel 600 ft reel Wt. (per ft) 0.05 0.07 Price (per ft)
C1HX31 MSH-5-RL C1HX32 MSH-6-RL
737
Special Application Hose

4219G
Fuel Line & Tank Vent
Construction: Black Buna-N tube. Synthetic high tensile cord reinforcement. Black Buna-N* cover. * Modified Buna-N compound for increased ozone resistance. Application: Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. SAE 30R7. Also for use in evaporative emission control systems and as a vent line. NOT recommended for Marine Fuel Lines. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Operating Temperature Range: -40F to +275F. Fittings & Fitting Attachment Suggestions: Shank type fittings attached with pinch clamps, preformed clamps or crimp ferrules. Fittings: Shank Type (Brass) page 839 Shank Type (Stainless Steel) page 845 Fitting Attachment: Pinch Clamps page 856 Band-It Jr.Preformed Clamps page 864 Crimp Ferrules page 867 4219G
Catalog Part No. Gates Model Hose I.D. Hose Maximum Operating (in) O.D. (in) Pressure (psi) 0.3125 0.56 50 Minimum Bend Radius (in) 3 Vacuum Service (in/Hg) 24 Reel Qty (ft) 450-650 Wt. (per ft) 0.10 Price (per ft)
C1BP85 4219-0107
Fluid Conveying
EH089
ESP Fuel Hose
Features: PVDF barrier. Polyester reinforced. Black MPR cover. CARB approved. Meets parts of SAE J1527 B1 and SAE J30 R6, R9, R11 specifications. Application: Fuel delivery lines for small engines. Petroleum-based chemicals. Biodiesel fuel to 100%. Marine fuel lines. Operating Temperature Range: -25F to +150F Fittings: Hose Barbs page 839 Crimp Ferrules page 867 EH089
Catalog Part No. C1KL45 C1KL46 Boston Model EH08904-125R EH08906-75R Hose I.D. (in) 0.250 0.375 Hose O.D. (in) 0.490 0.625 Maximum Working Pressure (psi) 250 250 Pkg Qty (ft) 125 75 Wt. (per ft) 0.08 0.10 Price (per ft)
738

FC350
Engine & Air Brake FMVSS106 AQP Tube Polyester Braid Cover Black
Construction: AQP elastomer tube, polyester inner braid and a single wire braid reinforcement, black polyester textile braided cover. Application: Air, gasoline, fuel, lubricating oils and coolants. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -55F to +300F, except air +250F. Reusable Fittings: Reduced Bore (Steel) page 800 Reduced Bore (Stainless Steel) page 829 Reduced Bore (Brass) page 833 FC350
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.19 0.31 0.41 0.50 0.62 0.88 1.12 0.52 0.68 0.77 0.94 1.08 1.23 1.50 Maximum Operating Pressure (psi) 2000 1500 1250 1250 750 400 300 Minimum Burst Pressure (psi) 8000 6000 5000 5000 3000 1600 1200 Minimum Bend Radius (in) 0.75 1.25 1.75 2.25 2.75 3.5 4.5 Vacuum Service (in/Hg) 28 28 28 28 20 15 15 Reel Qty (ft) 500-650 320-420 450-600 310-400 230-300 180-240 120-160 Wt. (per ft) 0.13 0.21 0.24 0.35 0.38 0.45 0.48 Price (per ft)
C1CR76 FC350-04 C1CR77 FC350-06 C1CR78 FC350-08 C1EU57 FC350-10 C1CR79 FC350-12 C1CR80 FC350-16 C1CR81 FC350-20
Fluid Conveying
739

FC355
Engine & Air Brake FMVSS106 AQP Tube AQP Cover Blue
Construction: AQP elastomer tube, polyester inner braid and a single wire braid reinforcement, blue AQP elastomer cover. Application: Air, gasoline, fuel, lubricating oils and coolants. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +300F, except air, not to exceed 250 PSI or +250F. Reusable Fittings: Reduced Bore (Steel) page 800 Reduced Bore (Stainless Steel) page 829 Reduced Bore (Brass) page 833 FC355
Catalog Part No. C1HE59 Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.19 0.88 1.13 1.38 0.52 1.24 1.52 1.75 FC355-16 FC355-24 Maximum Operating Pressure (psi) 1500 400 300 250 Minimum Burst Pressure (psi) 6000 1600 1250 1000 Minimum Bend Radius (in) 0.75 3.50 4.50 5.50 Vacuum Service (in/Hg) 28 15 15 11 Reel Qty (ft) 510-670 Rolls Only Rolls Only Rolls Only Wt. (per ft) 0.17 0.57 0.59 0.70 Price (per ft)
C1EQ11 FC355-04 C1EQ12 FC355-20 C1HE60
Fluid Conveying
2570
Air Brake SAE J1402 FMVSS106
Construction: Synthetic rubber tube, double textile braid and black synthetic rubber cover. Application: Tractor to trailer lines, axle chamber lines and tractor service lines. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +212F. Reusable Fittings: Aeroquip Reusable Air Brake Fittings page 812 (-6 and -8 only). 2570
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.38 0.75 Maximum Operating Pressure (psi) 225 Minimum Burst Pressure (psi) 900 Minimum Bend Radius (in) 1.75 Vacuum Service (in/Hg) Reel Qty (ft) 450-475 Wt. (per ft) 0.18 Price (per ft)
C1BH40 2570-6
740

FLX5526
Heater Hose Silicone Rubber Blue
Application: For heavy-duty pressure connections in hostile engine environments. Characteristics: Continuous operating temperature -65F to 350F. Nylon fiber reinforced. Resistant to coolant additives. Suggested Clamps: Oetiker Stepless Ear Pinch Clamps page 857 Oetiker Stepless Spring Clamps page 861 Trident #730 S.S. Constant-Torque Clamps page 863 FLX5526
Catalog Part No. Flexfab Model Hose I.D. Min/Max Hose O.D. Min/Max (in) (in) 0.480 / 0.520 0.605 / 0.645 0.730 / 0.770 0.855 / 0.905 0.970 / 1.020 0.830 / 0.840 0.955 / 0.970 1.08 / 1.09 1.18 / 1.22 1.33 / 1.40 Minimum Burst Pressure (psi) 250 250 200 175 175 Wt. (per ft) 0.18 0.22 0.25 0.30 0.15 Price (per ft)
C1KG96 FLX5526-050 C1KG20 FLX5526-062 C1KG21 FLX5526-075 C1KG22 FLX5526-087 C1KG27 FLX5526-100
Fluid Conveying
FLX5581
Silicone Rubber Coolant Hose Blue
Construction: 4-Ply silicone coolant hose reinforced with polyester fabric and coated with specially compounded silicone elastomer. Characteristics: Continous operating temperature is -65F to 350F. Meets or exceeds the requiprments of SAE J20 R1 Class A, TMC RP303B Class 1 Grade 1 and most OEM truck manufacturers' specifications. Suggested Clamps: Oetiker Stepless Ear Pinch Clamps page 857 Oetiker Stepless Spring Clamps page 861 Trident #730 S.S. Constant-Torque Clamps page 863 FLX5581
Catalog Part No. C1KL93 Minimum Burst Pressure (psi) 560 550 500 475 450 400 400 400 350 325 300 275 250 Price (per ft)
Flexfab Model FLX5581-087
Hose I.D. (in) 0.88 1.00 1.25 1.38 1.50 1.75 1.88 2.00 2.25 2.38 2.50 2.75 2.88
Hose O.D. (in) 1.27 1.39 1.64 1.77 1.89 2.14 2.27 2.39 2.64 2.77 2.89 3.14 3.27
Length (in) 36 36 36 36 36 36 36 36 36 36 36 36 36
Wt.
(per ft) 0.30 0.39 0.49 0.53 0.59 0.68 0.71 0.78 0.88 0.93 0.98 1.07 1.13
C1KG97 FLX5581-100 C1KG98 FLX5581-125 C1KL94 FLX5581-138 C1KG99 FLX5581-150 C1KG28 FLX5581-175 C1KL95 FLX5581-187 C1KG56 FLX5581-200 C1KH11 FLX5581-225 C1KG57 FLX5581-238 C1KG59 FLX5581-250 C1KH12 FLX5581-275 C1KL96 FLX5581-287
741

Hydraulic Power & Control FLX5581
Catalog Part No. Minimum Burst Pressure (psi) 250 200 150 150 150 125 Price (per ft)
Flexfab Model
Hose I.D. (in) 3.00 3.50 4.00 4.25 4.50 5.00
Hose O.D. (in) 3.39 3.89 4.39 4.64 4.89 5.39
Length (in) 36 36 36 36 36 36
Wt.
(per ft) 1.17 1.37 1.56 1.67 1.76 1.95
C1KH13 FLX5581-300 C1KG60 FLX5581-350 C1KH14 FLX5581-400 C1KL97 FLX5581-425 C1KH15 FLX5581-450 C1KH16 FLX5581-500
FC321
L.P. Gas UL Listing MH6044
Fluid Conveying
Construction: Synthetic rubber tube, a textile inner braid, a stainless steel wire braid reinforcement and a synthetic rubber impregnated textile braid cover. Application: Designed for butane-propane applications on either mobile or stationary equipment. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +250F. Reusable Fittings: Reduced Bore (Steel) page 800 Reduced Bore (Stainless Steel) page 829 Reduced Bore (Brass) page 833 Warning: LPG is a very hazardous liquid or gas and should be handled with maximum care to prevent leakage. Since the gas is heavier than air, it may flow along the ground if it escapes and cause an explosion or a fire. No leakage should ever be tolerated. FC321
Maximum Operating Pressure (psi) 350 350 Minimum Burst Pressure (psi) 1750 1750
Catalog Part No.
Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.31 0.41 0.67 0.77
Minimum Bend Radius (in) 2.0 2.31
Reel Qty (ft) 560 460
Wt. (per ft) 0.17 0.19
Price (per ft)
C1CR65 FC321-06 C1ZU74 FC321-08
742

FC579
10,000 PSI Jack Hose Double Wire Braid Meets IJ100 Requirements
Construction: Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. Application: Hydraulic jacking system service with petroleum and water-base fluids. Meets the performance requirements of the Material Handling Institute Specification IJ100. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to 212F. Crimp Fittings: Global TTC (Steel) page 763 Global Skive page 791 FC579
Catalog Part No. C1JF23 Hose I.D. Hose Aeroquip Model (in) O.D. (in) FC579-04 0.25 0.53 Maximum Operating Pressure (psi) 10000 Minimum Burst Pressure (psi) 20000 Minimum Bend Radius (in) 2.00 Vacuum Service (in/Hg) Reel Qty (ft) 450-600 Wt. (per ft) 0.22 Price (per ft)
Fluid Conveying
GH134
Multi-Refrigerant SAE J2064 Type E Class 1 E-Z Clip Fitting System
Construction: Nylon veneer tube, stabilized synthetic braided reinforcement and chlorobutyl rubber cover. Application: Transportation refrigeration and air conditioning systems. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -22F to 257F. Effusion Rates: R404a: .2 lbs./ft/yr. at 140F. HFC 134a: .50 lbs./ft/yr. at 176F. R22: 27.7 lbs./ft/yr. at 158F. Moisture Ingression: .08 gm./in/yr. Fittings: E-Z Clip System page 816 GH134
Catalog Part No. C1EZ27 C1EZ28 C1EZ25 C1EZ26 Hose I.D. Hose Aeroquip Model (in) O.D. (in) GH134-6 GH134-8 GH134-10 GH134-12 0.31 0.41 0.50 0.63 0.58 0.70 0.78 0.98 Maximum Operating Pressure (psi) 500 500 500 500 Minimum Burst Pressure (psi) 2000 2000 2000 2000 Minimum Bend Radius (in) 2.00 2.50 3.00 4.00 Vacuum Service (in/Hg) 29.5 29.5 29.5 29.5 Reel Qty (ft) 560 575 360 367 Wt. (per ft) 0.09 0.12 Price (per ft)
0.15 0.18
Note: Reeled hose may be purchased by the foot or by the reel. Note: All sizes will withstand full negative pressure for charging purposes.
743

FC558
Refrigeration Air Conditioning SAE J2064 Type B Class 1
Construction: Butyl rubber tube, single wire braid reinforcement and textile braid cover. Application: Designed for applications using only refrigerant 134a. Not recommended for applications using refrigerant 12 or R22. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -40F to +250F. Reusable Fittings: Reduced Bore (Steel) page 800 Reduced Bore (Stainless Steel) page 829 Reduced Bore (Brass) page 833 FC558
Catalog Part No. Hose I.D. Hose Aeroquip Model (in) O.D. (in) 0.88 1.12 1.24 1.51 Maximum Operating Pressure (psi) 500 500 Minimum Burst Pressure (psi) 2500 2500 Minimum Bend Radius (in) 7.38 9.00 Vacuum Service (in/Hg) 28 28 Reel Qty (ft) Rolls Only Rolls Only Wt. (per ft) 0.47 0.57 Price (per ft)
C1EQ22 FC558-16 C1EQ23 FC558-20
Fluid Conveying
2807
Teflon Tube Stainless Steel Braid
Construction: Extruded Teflon tube with stainless steel single wire braid. Application: Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -100F to +500F. Reusable Fittings: Teflon 1-Braid (Steel) page 813 Teflon 1-Braid (Stainless Steel) page 830 Crimp Fittings: Flat Crimp (Steel) page 798 Flat Crimp (Stainless Steel) page 825 Internal Support Coil: Internal Support Coil (Stainless Steel) page 758 Note: Steam 200 psi at +388F max. Engineering information is available for specific critical temperature requirements. Contact us for assistance. Note: Maximum negative pressure shown for -16 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger Teflon hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. 2807
Catalog Part No. C1BJ83 C1BJ84 C1BJ87 Hose I.D. Hose Aeroquip Model (in) O.D. (in) 2807-3 2807-4 2807-8 0.14 0.19 0.42 0.25 0.30 0.54 Maximum Operating Pressure (psi) 3000 3000 2000 Minimum Burst Pressure (psi) 12000 12000 8000 Minimum Bend Radius (in) 1.50 2.0 5.25 Vacuum Service (in/Hg) 28 28 28 Reel Qty (ft) Rolls Only Rolls Only Rolls Only Wt. (per ft) 0.04 0.06 0.12 Price (per ft)
744

Hydraulic Power & Control 2807
Catalog Part No. C1BJ79 C1BJ82 Hose I.D. Hose Aeroquip Model (in) O.D. (in) 2807-10 2807-20 0.51 1.12 0.63 1.29 Maximum Operating Pressure (psi) 1500 625 Minimum Burst Pressure (psi) 6000 2500 Minimum Bend Radius (in) 6.5 16 Vacuum Service (in/Hg) 28 12 Reel Qty (ft) Rolls Only Rolls Only Wt. (per ft) 0.16 0.34 Price (per ft)
STW
Teflon Tube Stainless Steel Braid
Construction: Extruded Teflon tube with stainless steel single wire braid. Application: Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -65F to 450F. Reusable Fittings: Teflon 1-Braid (Steel) page 813 Teflon 1-Braid (Stainless Steel) page 830 Crimp Fittings: Everswage (Stainless Steel) page 827 Flat Crimp (Stainless Steel) page 825 Flat Crimp (Steel) page 798 Internal Support Coil: Internal Support Coil (Stainless Steel) page 758 Note: Maximum negative pressure shown for -16 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger Teflon hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. STW
Catalog Part No. Hose I.D. Hose Everflex Model (in) O.D. (in) 0.19 0.25 0.31 0.41 0.50 0.63 0.88 0.31 0.38 0.43 0.54 0.64 0.77 1.03 Maximum Operating Pressure (psi) 3000 3000 2500 2000 1750 1500 1000 Minimum Burst Pressure (psi) 12000 12000 10000 8000 7000 6000 4000
Minimum Bend Radius (in) 2.0 3.0 4.0 5.0 6.5 7.5 9.0
Vacuum Service (in/Hg) 28 28 28 28 28 28 12
Reel Qty (ft) Rolls Only Rolls Only Rolls Only Rolls Only Rolls Only Rolls Only Rolls Only
Wt. (per ft) 0.06 0.08 0.10 0.12 0.16 0.19 0.28
Price (per ft)
C1EH81 S-4TW C1JQ85 S-5TW C1JQ87 S-6TW C1JQ88 S-8TW C1JQ78 S-10TW C1JQ80 S-12TW C1JQ82 S-16TW
745

SC
Thick Teflon Tube Improved Kink Resistant Stainless Steel Braid Conductive Liner
Construction: Extruded Teflon tube (33% more Teflon than most other manufacturers) with 304 stainless steel wire braid. Also has an internal conductive static dissipating liner that provides a path to the hose end fittings for applications where flow induced electrostatic charges can occur. The additional Teflon results in improved bend radius, kink resistance and slows permeation of gases. Application: Marine power trim, hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling. Please review the general guidelines for selection, installation and maintenance of hose assemblies starting on page 1355 Operating Temperature Range: -65F to +450F. Crimp Fittings: Everswage (Stainless Steel) page 827 SC
Catalog Part No. Hose I.D. Hose Everflex Model (in) O.D. (in) 0.1875 0.32 Maximum Operating Pressure (psi) 3000 Minimum Burst Pressure (psi) 12000 Minimum Bend Radius (in) 1.875 Vacuum Service (in/Hg) Reel Qty (ft) Rolls Only Wt. (per ft) 0.07 Price (per ft)
Fluid Conveying
C1DK72 SC-4
746
Hose Assemblies
Hydraulic Hose Assemblies
Single Wire Braid Aeroquip GH663 Hose
Catalog Part No. HSC Model
C1JH12 C1JH14 C1JH16 C1JH19 C1JH21 C1JH25 C1JH30 C1JH33 C1JH36 C1JH41 C1JH43 C1JH27 C1JH29 C1JH32 C1JH35 C1JH38 C1JH45 C1JH66 C1JH76 C1JH84 C1JH50 C1JH56 C1JH62 C1JH75 C1JH79 C1JH82 C1JH87 C1JH47 C1JH48 C1JG68 C1JG73 C1JG75 C1JG77 C1JG79 C1JG82 C1JG89 C1JG91 C1JG93 C1JG95 663-4-24-MP 663-4-36-MP 663-4-48-MP 663-4-60-MP 663-4-72-MP 663-4-96-MP 663-6-24-MP4 663-6-36-MP4 663-6-48-MP4 663-6-60-MP4 663-6-72-MP4 663-6-15-MP 663-6-24-MP 663-6-36-MP 663-6-48-MP 663-6-60-MP 663-6-96-MP 663-8-36-MP6 663-8-48-MP6 663-8-72-MP6 663-8-15-MP 663-8-24-MP 663-8-36-MP 663-8-48-MP 663-8-60-MP 663-8-72-MP 663-8-96-MP 663-8-108-MP 663-8-120-MP 663-12-24-MP 663-12-36-MP 663-12-48-MP 663-12-60-MP 663-12-72-MP 663-16-24-MP 663-16-36-MP 663-16-48-MP 663-16-60-MP 663-16-72-MP
Single Wire Braid Aeroquip GH663 Hose
Hose Hose I.D. Lgth (in) (in)

0.25 0.25 0.25 0.25 0.25 0.25 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.75 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.00 24 36 48 60 72 96 24 36 48 60 72 15 24 36 48 60 96 36 48 72 15 24 36 48 60 72 96 108 120 24 36 48 60 72 24 36 48 60 72
Fittings
1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP
Price Wt. Each
GH663 Technical Information: page 701 Note: Fitting Codes & Thread Sizes are listed below. Single Wire Braid Aeroquip GH663 Hose
Hose Hose Catalog I.D. Lgth Part No. HSC Model (in) (in)
C1JG96 C1JG98 C1JH13 C1JH15 C1JH18 C1JH20 C1JH22 C1JH26 C1JH28 C1JH31 C1JH34 C1JH37 C1JH42 C1JH44 C1JH49 C1JH51 C1JH57 C1JH67 C1JH77 C1JH80 C1JH85 C1JH59 C1JH69 C1JH78 C1JH81 C1JH86 C1JG66 C1JG70 C1JG74 C1JG76 C1JG78 C1JG80 C1JG83 C1JG90 C1JG92 C1JG94 C1JG97 663-4-15-FJ 663-4-24-FJ 663-4-36-FJ 663-4-48-FJ 663-4-60-FJ 663-4-72-FJ 663-4-96-FJ 663-6-15-FJ 663-6-24-FJ 663-6-36-FJ 663-6-48-FJ 663-6-60-FJ 663-6-72-FJ 663-6-96-FJ 663-8-15-FJ 663-8-24-FJ 663-8-36-FJ 663-8-48-FJ 663-8-60-FJ 663-8-72-FJ 663-8-96-FJ 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.50 0.50 0.50 15 24 36 48 60 72 96 15 24 36 48 60 72 96 15 24 36 48 60 72 96 36 48 60 72 96 24 36 48 60 72 24 36 48 60 72 15
1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP
Fittings
-04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ 1/4 MP x 1/4 MP
Price Wt. Each
Fluid Conveying
1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 1 MP x 1 MP 1 MP x 1 MP 1 MP x 1 MP 1 MP x 1 MP 1 MP x 1 MP
663-8-36-FJ10 0.50 663-8-48-FJ10 0.50 663-8-60-FJ10 0.50 663-8-72-FJ10 0.50 663-8-96-FJ10 0.50 663-12-24-FJ 663-12-36-FJ 663-12-48-FJ 663-12-60-FJ 663-12-72-FJ 663-16-24-FJ 663-16-36-FJ 663-16-48-FJ 663-16-60-FJ 663-16-72-FJ 663-4-15-MP 0.75 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.00 0.25
Fitting Thread Sizes Fitting Code FJ MP Fitting Type Female JIC 37 Swivel Male Pipe -02 1/8-27 -04 1/4-18 -05 -06 -08 -10 -12 3/4-14 -16 1-11-1/2 -20 1-5/8-12 -24 1-7/8-12
5/16-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 3/8-18 1/2-14
1-1/4-11-1/2 1-1/2-11-1/2
747
Hose Assemblies

Double Wire Braid Aeroquip GH781 Hose
Catalog Part No. HSC Model
C1JJ69 C1JJ71 C1JJ73 C1JJ75 781-4-15-MP 781-4-24-MP 781-4-36-MP 781-4-48-MP 781-4-60-MP 781-4-72-MP 781-4-96-MP 781-6-24-MP4 781-6-36-MP4 781-6-48-MP4 781-6-60-MP4 781-6-72-MP4 781-6-15-MP 781-6-24-MP 781-6-36-MP 781-6-48-MP 781-6-60-MP 781-6-96-MP 781-8-36-MP6 781-8-48-MP6 781-8-72-MP6 781-8-15-MP 781-8-24-MP 781-8-36-MP 781-8-48-MP 781-8-60-MP 781-8-72-MP 781-8-96-MP 781-8-108-MP 781-8-120-MP 781-12-24-MP 781-12-36-MP 781-12-48-MP 781-12-60-MP 781-12-72-MP 781-16-24-MP 781-16-36-MP 781-16-48-MP 781-16-60-MP 781-16-72-MP
Double Wire Braid Aeroquip GH781 Hose
Hose Hose I.D. Lgth (in) (in)

0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.75 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.00 15 24 36 48 60 72 96 24 36 48 60 72 15 24 36 48 60 96 36 48 72 15 24 36 48 60 72 96 108 120 24 36 48 60 72 24 36 48 60 72
Fittings
1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 1/4 MP x 1/4 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 3/8 MP x 3/8 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 1/2 MP x 1/2 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 3/4 MP x 3/4 MP 1 MP x 1 MP 1 MP x 1 MP 1 MP x 1 MP 1 MP x 1 MP 1 MP x 1 MP
Price Wt. Each
GH781 Technical Information: page 705 Note: Fitting Codes & Thread Sizes are listed below. Double Wire Braid Aeroquip GH781 Hose
C1JJ68 C1JJ70 C1JJ72 C1JJ74 C1JJ76 C1JJ78 C1JJ80 C1JJ82 C1JJ84 C1JJ87 781-4-15-FJ 781-4-24-FJ 781-4-36-FJ 781-4-48-FJ 781-4-60-FJ 781-4-72-FJ 781-4-96-FJ 781-6-15-FJ 781-6-24-FJ 781-6-36-FJ 781-6-48-FJ 781-6-60-FJ 781-6-72-FJ 781-6-96-FJ 781-8-15-FJ 781-8-24-FJ 781-8-36-FJ 781-8-48-FJ 781-8-60-FJ 781-8-72-FJ 781-8-96-FJ 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.50 0.50 0.50 15 24 36 48 60 72 96 15 24 36 48 60 72 96 15 24 36 48 60 72 96 36 48 60 72 96 24 36 48 60 72 24 36 48 60 72
C1JJ77 C1JJ79 C1JJ81 C1JJ86 C1JJ89 C1JJ92 C1JJ95 C1JJ97 C1JJ83 C1JJ85 C1JJ88 C1JJ91 C1JJ94 C1JJ99 C1JK20 C1JK24 C1JK31 C1JK14 C1JK16 C1JK19 C1JK23 C1JK27 C1JK30 C1JK34 C1JK11 C1JK12 C1JH97 C1JJ11 C1JJ20 C1JJ31 C1JJ35 C1JJ40 C1JJ42 C1JJ46 C1JJ58 C1JJ67
Fittings
-04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -04 FJ x -04 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ
Price Wt. Each
Fluid Conveying
C1JJ90 C1JJ93 C1JJ96 C1JJ98 C1JK13 C1JK15 C1JK17 C1JK21 C1JK25 C1JK28 C1JK32 C1JK18 C1JK22 C1JK26 C1JK29 C1JK33 C1JH88 C1JH99 C1JJ17 C1JJ21
781-8-36-FJ10 0.50 781-8-48-FJ10 0.50 781-8-60-FJ10 0.50 781-8-72-FJ10 0.50 781-8-96-FJ10 0.50 781-12-24-FJ 781-12-36-FJ 781-12-48-FJ 781-12-60-FJ 781-12-72-FJ 781-16-24-FJ 781-16-36-FJ 781-16-48-FJ 781-16-60-FJ 781-16-72-FJ 0.75 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.00
C1JJ34 C1JJ39 C1JJ41 C1JJ44 C1JJ57 C1JJ66
5/16-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 3/8-18 1/2-14
1-1/4-11-1/2 1-1/2-11-1/2
748
Hose Assemblies
Four Heavy Spiral Aeroquip GH493 Hose
GH493 Technical Information: page 709 Note: Fitting Codes & Thread Sizes are listed below. Four Heavy Spiral Aeroquip GH493 Hose
C1JF71 C1JF87 C1JG22 C1JG34 C1JG40 C1JG41 C1JG43 C1JG44 C1JG45 C1JG51 C1JG53 C1JG55 C1JG59 C1JG61 C1JG52 C1JG54 C1JG56 C1JG60 C1JG65 C1JF38 C1JF44 C1JF51 C1JF53 C1JF54 C1JF55 C1JF56 C1JF59 C1JF69 C1JF70 493-6-15-FJ 493-6-24-FJ 493-6-36-FJ 493-6-48-FJ 493-6-60-FJ 493-6-72-FJ 493-6-96-FJ 493-8-15-FJ 493-8-24-FJ 493-8-36-FJ 493-8-48-FJ 493-8-60-FJ 493-8-72-FJ 493-8-96-FJ 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.50 0.50 0.50 15 24 36 48 60 72 96 15 24 36 48 60 72 96 36 48 60 72 96 24 36 48 60 72 24 36 48 60 72
Fittings
-06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -06 FJ x -06 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -08 FJ x -08 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -10 FJ x -10 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -12 FJ x -12 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ -16 FJ x -16 FJ
Price Wt. Each
Fluid Conveying
493-8-36-FJ10 0.50 493-8-48-FJ10 0.50 493-8-60-FJ10 0.50 493-8-72-FJ10 0.50 493-8-96-FJ10 0.50 493-12-24-FJ 493-12-36-FJ 493-12-48-FJ 493-12-60-FJ 493-12-72-FJ 493-16-24-FJ 493-16-36-FJ 493-16-48-FJ 493-16-60-FJ 493-16-72-FJ 0.75 0.75 0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.00
5/16-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 3/8-18 1/2-14
1-1/4-11-1/2 1-1/2-11-1/2
749
Hose Assemblies
Industrial Hose Assemblies
Contractor's Air Hose Assemblies

Application: Provide power to air operated construction equipment. For heavy-duty construction applications. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Features: Universal Quick-Acting fittings both ends, with safety clips. Note: The use of a safety clip or wire type retainer is necessary to assure Universal Couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as pin will not go through holes in mating flanges until couplings are locked in place. Note: Constant vibration created by air drills, pavement breakers etc. is destructive to air hose couplings, especially this quick-acting Universal type. A 3 to 10 foot whip hose is recommended, with the hose end that attaches to the tool being a heat-treated steel fitting. The other end of the whip hose may use the Universal coupling. The whip hose should remain permanently attached to the tool, and should be the same diameter as the supply line. Reference: NAHAD Pressure Guideline Chart page 1380 Contractor's Air Hose Assemblies
Catalog Part No. HSC Model Hose 3/4 I.D. x 50 FT HSC Sunrise hose, Nitrile Tube, Neoprene Cover, 4-Spiral, 300 PSI, Red Fittings Malleable Iron, Plated Fitting Attachment NAHAD Recommended Pressure Wt. Price Each
C1KY57 CAHA3/4X50R300PS
Crimped
110 PSI
21.00
Fluid Conveying
C1FV84 CAHA3/4X50R300P
3/4 I.D. x 50 FT Boston Marathoner, Nitrile Tube, Malleable Iron, Neoprene Cover, Plated 4-Spiral, 300 PSI, Red
Crimped
110 PSI
21.00
Note: Boston Marathoner hose (bulk) page 718 Note: HSC Sunrise hose (bulk) page 719
PVC Water Suction & Discharge Hose Assemblies

Application: General purpose suction and transfer applications in construction and mining. Irrigation lines, rock dusting, wellpoint systems, agri-foam systems, liquid fertilizer transfer. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Reference: NAHAD Pressure Guideline Chart page 1380 PVC Water Suction & Discharge Hose Assemblies
Catalog Part No. HSC Model Hose Fittings Fitting Attachment NAHAD Recommended Pressure 65 PSI (Hose Rating) Wt. 14.60 Price Each
C1GF13 GREEN-C-ST-2X20
2 I.D. x 20 FT Aluminum female cam & groove Preformed Kuriyama JG, coupler (Part C) one end, steel clamps, 65 PSI @ 68F, male pipe combination nipple galvanized steel, Green (un-plated) other end 2 per end 3 I.D. x 20 FT Aluminum female cam & groove Preformed Kuriyama JG, coupler (Part C) one end, steel clamps, 60 PSI @ 68F, male pipe combination nipple galvanized steel, Green (un-plated) other end 2 per end
60 PSI (Hose Rating)
30.00
750
Hose Assemblies
Industrial Hose Assemblies
PVC Water Suction & Discharge Hose Assemblies
4 I.D. x 20 FT Aluminum female cam & groove Preformed Kuriyama JG, coupler (Part C) one end, steel clamps, 50 PSI @ 68F, male pipe combination nipple galvanized steel, Green (un-plated) other end 2 per end
6 I.D. x 20 FT Aluminum female cam & groove Preformed Kuriyama JG, coupler (Part C) one end, steel clamps, 40 PSI @ 68F, male pipe combination nipple galvanized steel, Green (un-plated) other end 2 per end Note: Kuriyama Series JG Hose (bulk) page 726 Note: Working pressure decreases as temperature increases.
62.00
PVC Lay Flat Water Discharge Hose Assemblies

Application: Blue standard duty lay flat hose handles a wide range of applications in construction, industry, mining, agriculture and marine service. Please review application requirements and limitations found in NAHAD Pressure Guideline Chart page 1380 Reference: NAHAD Pressure Guideline Chart page 1380
PVC Lay Flat Water Discharge Hose Assemblies

Fluid Conveying
C1GJ22 BLUE-C-E-2X50
2 I.D. x 50 FT Aluminum female cam & groove Preformed Sun-Flow coupler (Part C) one end, clamps, SF-10, 80 PSI aluminum male cam & groove galvanized steel, @ 70F, Blue adapter (Part E) other end 2 per end 3 I.D. x 50 FT Aluminum female cam & groove Preformed Sun-Flow coupler (Part C) one end, clamps, SF-10, 80 PSI aluminum male cam & groove galvanized steel, @ 70F, Blue adapter (Part E) other end 2 per end 4 I.D. x 50 FT Aluminum female cam & groove Preformed Sun-Flow coupler (Part C) one end, clamps, SF-10, 70 PSI aluminum male cam & groove galvanized steel, @ 70F, Blue adapter (Part E) other end 2 per end 6 I.D. x 50 FT Aluminum female cam & groove Preformed Sun-Flow coupler (Part C) one end, clamps, SF-10, 60 PSI aluminum male cam & groove galvanized steel, @ 70F, Blue adapter (Part E) other end 2 per end
21.10
31.84
55.80
Note: Sun-Flow SF-10 Hose (bulk) page 724 Note: Working pressure decreases as temperature increases.
751
Hose Assembly Equipment

Accessories
Hose Assembly Lube

Application: A specially compounded lubricant superior to any other lubricant used in hose assembly work. Available in pints or gallons. Note: Not to be used with green cover fire resistant hydraulic fluid hoses. Hose Assembly Lube
Catalog Part No. Aeroquip Model Container Size 1 Pint Wt. 0.97 Price Each
C1BC87 222070
222070
Reusable Fitting Assembly Mandrels

Reusable Fitting Assembly Mandrels
Catalog Part No. Aeroquip Model Use with Fitting Styles 401-4, 411-4 411-6 (JIC) 401-6 (SAE) 401-8, 411-8 401-10, 411-10 411-12 (JIC) Wt. 0.46 0.18 0.24 0.36 0.58 0.82 Price Each
Fluid Conveying
C1AL29 1582-4S C1ZU76 FBM3407 C1ZU80 FBM3402 C1ZU79 FBM3403 C1ZU78 FBM3404 C1ZU75 FBM3409
1582 / 583
STC Connector Release Tools

Reopening Differential: 50 PSI. STC Connector Release Tools
Catalog Part No. Aeroquip Model Description Release Tool for -08 Connector Release Tool for -10 Connector Release Tool for -12 Connector Wt. 0.20 0.21 0.21 Price Each
C1KL92 FF90213-08 C1JD80 FF90213-10 C1JD81 FF90213-12
FF90213
752

Equipment
ProCrimp 1380 Crimp Machine

Production Capacity: All Aeroquip MatchMate Plus braided and spiral hose through -20 size. Flat field crimp thru -16. Barrel field crimp thru -20. Flat single skive 1 & 2-wire braid crimp thru -20. Flat single skive 4-wire spiral crimp thru -16. Unit will not crimp: Internal skive fittings. Hose that requires a positive stop, including the following Aeroquip hoses: 2807, 2808, FC186, FC465, FC469, FC505. Electrical Requirements: 115-Volt AC single phase (50/60)Hz circuit with a minimum of 15 amps. Crimp Machine Dimensions: Width 12.75 in., Depth 25.75 in., Height 28.50 in.
Fluid Conveying
The Aeroquip ProCrimp 1380 crimp machine crimps all your hose needs up to and including -20 SAE100R12 hose styles and the popular MatchMate Plus hoses and fittings. The ProCrimp 1380 is electronically controlled to give fast, accurate crimps the first time and every time you need a hose assembly. The electronic keypad is easy to adjust, with up to 10 programmable crimp settings. For hose styles and sizes used less frequently simply enter the 3 digit code of that hose. The ProCrimp 1380 comes complete with a standard power unit from ENERPAC, a name, like Aeroquip, which is synonymous with quality, worldwide. ProCrimp 1380 Crimp Machine
Catalog Part No. Aeroquip Model Description 115 Volt 60 Hz Crimp Machine with 5 Die Cages: M150, M210, M240, M320, M370. For crimping 2-wire hose sizes -4, -6, -8, -12, -16 GH781 & GH793 Die Cage Crimps Size -4 GH663, GH781, GH793, GH195, FC310 Die Cage Crimps Size -6 GH663 Die Cage Crimps Size -6 GH781, GH793, GH195, GH493 Die Cage Crimps Size -8 GH663, GH781, GH793, GH195, FC310 Die Cage Crimps Size -10 GH195, GH781, GH793, GH493 Tool Steel Die Cage Crimps Size -20 GH781, GH195, GH493, 2661, FC318 Repair Kit Wt. 100.00 10.00 10.00 5.00 5.00 6.00 5.00 1.70 Price Each
C1CW93 FT1380-115-5
C1CW95 FT1380-200-M150 C1CW96 FT1380-200-M180 C1CW97 FT1380-200-M210 C1CW98 FT1380-200-M240 C1ZX81 C1CX14 FT1380-200-M280 FT1380-275-M465
C1ED92 FT1380-2-9
753

Equipment
FT1268 SOCKETLESS Fitting Hand-Held Assembly Tool

Hose Specifications: SOCKETLESS hose, -04, -06 and -08 sizes. Features: Handheld. Custom design. Corrosion resistant. One mandrel fits all.
FT1268 SOCKETLESS Fitting Hand-Held Assembly Tool

Catalog Part No. Aeroquip Model Description Assembly Tool for sizes -4, -6, -8 Wt. 0.40 Price Each
C1CW78 FT1268
FT1356 Hose Cutter

Application: Specially designed for cutting all non-wire reinforced hose, such as GH134 Multi-Refrigerant hose.
Fluid Conveying
FT1356 Hose Cutter Miscellaneous Products

Catalog Part No. Aeroquip Model Description Hose Cutter Replacement Blade for Hose Cutter Wt. 0.28 0.06 Price Each
C1EZ22 FT1356 C1EZ23 FT1356-2-1
FT1357 E-Z Clip Clip Closing Tool

Application: Used to close the clips used with the E-Z Clip System for GH134 Multi-Refrigerant hose assemblies.
FT1357 E-Z Clip Clip Closing Tool

Catalog Part No. Aeroquip Model Description Clip Closing Tool Wt. 0.41 Price Each
C1EZ24 FT1357
754
Hose Protection
Steel Protective Coil Spring

Construction: Rust resistant steel wire. Application: Protects hose cover and reinforcement from abrasion and accidental damage. The coil should fit snugly to the hose O.D. Expanding the coil I.D. (unwinding the coil) may be necessary for proper installation. Steel Protective Coil Spring
Catalog Part No. C1CA75 900564-1S C1CA76 900564-2S Aeroquip Model Spring I.D. (in) 0.61 0.73 0.85 0.91 1.04 1.18 1.34 1.66 2.12 2.37 Wt. (per ft) 0.20 0.22 0.25 0.25 0.28 0.43 0.37 0.41 0.51 0.81 Price (per ft)
C1CA74 900564-14S C1CA77 900564-3S C1CA78 C1CA79 C1CA81 900564-4S 900564-5S 900564-7S
C1CA80 900564-6S C1CA82 900564-8S C1CA73 900564-10S
Fluid Conveying
Plastic Protective Coil Sleeve

Application: Recommended to protect hose from abrasion, this light weight plastic sleeve is unaffected by air, water, oil, gasoline, hydraulic and most other fluids. This coil can also be used for group bundling of hose lines. Operating Temperature Range: 0F. To +180F. Plastic Protective Coil Sleeve
Catalog Part No. C1CB67 900952-6 C1CB68 900952-8 C1CB64 900952-10 C1CB65 900952-12 C1CB66 C1EP33 900952-16 900952-22 Sleeve I.D. (in) 0.38 0.50 0.63 0.75 1.0 1.38 1.58 Wt. (per ft) 0.03 0.04 0.05 0.06 0.13 0.18 0.22 Price (per ft)
Aeroquip Model
C1EF77 900952-30
755
Hose Protection
Firesleeve
Construction: Uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber. Application: Firesleeve will protect hose from direct flame. Clamps: FF9217 Firesleeve Clamps page 756 Firesleeve
Catalog Part No. Clamp Number (2 Required Sleeve Aeroquip Model per Hose Assy) I.D. (in) FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S 0.62 0.75 0.81 0.88 1.00 1.25 1.50 1.62 1.75 2.00 2.38 Wt. (per ft) 0.20 0.20 0.21 0.23 0.25 0.29 0.38 0.35 0.37 0.40 0.48 Price (per ft)
C1BW66 624-10 C1BW67 624-12 C1BW68 624-13 C1EN61 624-14 C1BW69 624-16 C1BW70 624-20 C1HJ65 624-24 C1EN62 624-26 C1EN63 624-28 C1FD39 624-32 C1HJ66 624-38
Firesleeve Clamp
Firesleeve Clamp
Catalog Part No. Aeroquip Model Clamp Size (in) 1-3/8 dia x 3/8 wide 3 dia x 3/8 wide Wt. 0.04 0.25 Price Each
C1EQ47 FF9217-0622S C1EQ48 FF9217-0648S
756
Hose Protection
Nylon Abrasion Sleeve

Construction: Black Cordura or Anso-tex bulk nylon fiber yarn. Doubled flat thickness is 0.090 inches 0.020 inches. Application: Passes FMVSS 302 horizontal flame test, MSHA accepted. Protec is woven from thousands of nylon filaments into a self-renewing, abrasion-resistant fabric sleeve. As it is scuffed and worn, its filaments friz forming an even thicker more protective shield. This smooth-bore sleeve is easily installed over hose, chains, cables, or springs and may be secured with nylon cable ties or band-clamps As a hose cover, it provides outstanding personal injury protection to equipment operators by deflecting the spray of hot hydraulic fluids in the event of a hose failure It also extends individual hose life in severe abrasive environments. It is an excellent product for holding two or more hoses in a single bundle For hose groups that must follow the same flex pattern, bundling will provide identical flex memory to all hoses in group bundle. In some cases, it eliminates the need for bulkhead couplings by shielding hoses that must pass through metal openings. Temperature Rating: 250F Maximum Ambient. Nylon Abrasion Sleeve
Catalog Part No. Tompkins Model C1JG23 C1JG25 NHS-071-300 NHS-125-300 C1JG24 NHS-100-300 C1JG26 NHS-159-300 Nominal I.D. (in) 0.71 1.00 1.25 1.59 1.75 2.07 2.38 2.54 2.96 3.66 Outside Flat Height (in) 1.19 1.66 2.03 2.56 2.81 3.31 3.81 4.06 4.75 5.81 Wt. (per ft) 0.04 0.04 0.04 0.06 0.05 0.09 0.06 0.09 0.09 0.10 Price (per ft)
Fluid Conveying
C1JG27 NHS-175-300 C1JG28 NHS-207-300 C1JG29 NHS-238-300 C1JG30 NHS-254-300 C1JG31 NHS-296-300 C1JG33 NHS-366-300
Flexible Hose Bend Restrictors

Application: Tapered PVC sleeve reduces bending stress in the hose near the coupling to prevent damage. Features: Smooth finish protects equipment from being scratched. Attractive appearance enhances look of quality. Friction fit requires no adhesives or clamps. Operating Temperature Range: -40F to +200F. Flexible Hose Bend Restrictors
Catalog Part No. Gates Part No. Gates Model HBR-1052 I.D. Length (in) (in) Color 0.84 7.00 Black Wt. 0.20 Price Each C1EN99 7277-1052-5
757
Hose Protection
Stainless Steel Internal Support Coil

Application: Recommended for vacuum service with most hoses. Stainless Steel Internal Support Coil
Catalog Part No. C1EF54 222005-13C C1BC86 222005-15C Aeroquip Model Coil O.D. Wt. (in) (per ft) 0.73 1.19 2.76 0.75 Price (per ft)
EPHA Hose Protectors

Features: Extremely high wear factor. Resists solvents, oils, grease, gasoline. 3 grooves protect cable ties and prevent slipping. Cable ties included. Application: Abrasion protection for hoses. Operating Temperature Range: -40F to 430F. EPHA Hose Protectors
Catalog Part No. C1CY59 HP4-B C1CY60 HP6-B C1CY61 HP8-B Aeroquip Model Size 4 in. 6 in. 8 in. Color Black Black Black Wt. 0.08 0.10 0.15 Price Each
Fluid Conveying
EPHA Hose Spacers

Miscellaneous Products Features: Cable ties included. Application: Prevents hose abrasion. Keeps hoses organized. EPHA Hose Spacers
Catalog Part No. C1EQ66 HSR-1 C1CY69 HSR-2 C1EQ67 HSR-3 Aeroquip Model Size 3/4 in. 1 in. 1-1/8 in. Color Black Black Black Wt. 0.10 0.05 0.06 Price Each
758
Hose Protection
Bundling Sleeves
Features: Protects hydraulic lines from damage by holding them in place, yet provides enough flexibility for normal operation Strong, abrasion and UV resistant 1050 ballistic nylon material, 0.71mm thick, rated to 175 maximum ambient temperature Industrial strength hook and loop closure on entire length Tight weave pattern (less likely to snag) Easy installation with no clamping required Easy field removal and replacement without disconnecting hoses from system Black color with a urethane treatment. Bundling Sleeves
Sleeve Bulk Fits Bundle Width Roll Circumference Laid Length Flat (in) (ft) (in) 6.00 9.40 12.50 15.70 7.75 11.00 14.00 17.25 150 150 150 150
Catalog Part No. C1HK23
Aeroquip Model FC676-2000
Fits Bundle Dia (in) 2.00 3.00 4.00 5.00
Wt. (per ft) 0.01 0.13 0.16 0.06
Price (per ft)
C1GJ39 FC676-3000 C1GJ40 FC676-4000 C1HK24 FC676-5000
Bundling Straps - Hanging Style

Features: Allows hoses to expand and contract while holding them firmly in place Standard duty models use black 1050 ballistic nylon, 2.38mm thick, with urethane coating and a Delrin fastening loop Heavy duty models use black 1050 ballistic nylon with dense nylon backing, 3.18mm thick, with urethane coating and a nickel plated steel fastening loop Rated to 175F maximum ambient temperature Can be bolted to the application through the 7/16 grommet Ideal for vertical or horizontal mounting Adjustable to any size hose bundle Black color with a urethane treatment. Bundling Straps - Hanging Style
Strap Fits Bundle Length Circumference Laid Flat (in) (in) 8.00 12.00
Fluid Conveying
Catalog Part No.
Aeroquip Model
Type Heavy Duty, Individually Packaged Heavy Duty, Individually Packaged Heavy Duty, Individually Packaged Heavy Duty, Individually Packaged
Wt. 0.07
Price Each
C1GJ73 FF90526-8
C1GJ70 FF90526-12
12.00
16.00
0.08
C1GJ71 FF90526-16
16.00
20.00
0.09
C1GJ72 FF90526-20
20.00
24.00
0.10
759
Hose Protection
Bundling Straps - Cinching Style

Features: Allows hoses to expand and contract while holding them firmly in place Standard duty models use black 1050 ballistic nylon, 2.38mm thick, with urethane coating and a Delrin fastening loop Heavy duty models use black 1050 ballistic nylon with dense nylon backing, 3.18mm thick, with urethane coating and a nickel plated steel fastening loop Rated to 175F maximum ambient temperature Adjustable to any size hose bundle Black color with a urethane treatment. Bundling Straps - Cinching Style
Catalog Part No. Strap Fits Bundle Length Circumference Laid Flat (in) (in) 8.00 12.00
Aeroquip Model
Type Heavy Duty, Individually Packaged Heavy Duty, Individually Packaged Heavy Duty, Individually Packaged Heavy Duty, Individually Packaged
Wt. 0.05
Price Each
C1GJ69 FF90522-8
C1GJ66 FF90522-12
12.00
16.00
0.08
C1GJ67 FF90522-16
16.00
20.00
0.07
C1GJ68 FF90522-20
20.00
24.00
0.09
760
Hose Fittings
Category (Fits These Hose Styles) Page Hydraulic Power & Control Steel Crimp Global TTC (2661, FC579, FC619, FC693, FC735, GH195, GH663, GH781, GH793) . . . . . . . . . . . . . . . . 763 Global TTC-12 (2661(-12), FC619 (-12), FC636, GH493) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 777 Spiral TTC (FC254, FC273, FC606) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 785 Field Crimp (2661(-12, -16), FC619 (-12, -16), GH663, GH793 (-4 thru -8, -12 thru -20)) . . . . . . . . . . . . . . 790 Global Skive Nipples (Clamp: 2661/FC619 (-12 thru -20). Crimped 1SA Socket: FC639 (-04 to -08), GH663. Crimped 1SB Socket: FC195, FC579, FC639 (-10 to -16), FC735 (-04 to -20), GH195, GH781 (-4 thru -20), GH793) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791 Global OTC (2661, FC619) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 792 Polyon Swage (FC372, FC373, FC374, FC375, FC902, FC914) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 793 Synflex 3903/7903 Swage (25CT (-08), 30CT (Sizes -04 to -08), 3130, 3440 (-04 to -08), 37AL, 3800). . 794 Synflex 390H/790H Swage (3440 (-12 to -16), 3R80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 797 PTFE Crimp (2807, FC807, STW). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 798 PTFE Crimp (FC363, FC364) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 799 Reusable 1 wire Braid Reduced Bore (2651, FC234, FC300, FC321, FC350, FC355, FC558, FC802). . . . . . . . . . . . 800 1 wire Braid Thru-The-Cover (GH663) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 806 2 wire Braid Skive (FC195) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 807 2 wire Braid Thru-The-Cover (GH793) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 808 Polyon (FC372, FC373, FC901, FC902) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 809 SOCKETLESS (2556, FC332, FC647, Easy Couple) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 Air Brake (2570) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 812 Teflon 1 Braid (2807, FC807, STW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 813 Special Products E-Z Clip System For GH134 Multi-Refrigerant Hose, Size -04 FC505 Refrigerant Hose . . . . . . . . . . . . . 816 Stainless Steel Crimp Global TTC (2661, FC579, FC619, FC693, FC735, GH195, GH663, GH781, GH793) . . . . . . . . . . . . . . . . 825 Synflex 390A Swage (25CT (-08), 30CT (Sizes -03 to -08), 3130, 3440 (-04 to -08), 37AL, 3800) . . . . . . 825 PTFE Crimp (2807, FC807, STW). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825 PTFE Crimp (FC363, FC364) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 826 Everswage (SC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 827 Reusable 1 wire Braid Reduced Bore (2651, FC234, FC300, FC321, FC350, FC355, FC558, FC802). . . . . . . . . . . . 829 2 wire Braid Skive (FC195) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 829 SOCKETLESS (2556, FC332, FC647, Easy Couple) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 829 Teflon 1 Braid (2807, FC807, STW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 830 Brass Crimp Polyon Crimp (FC372, FC373, FC901, FC902). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 831 Marine Steering (MSH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 832 Reusable 1 wire Braid Reduced Bore (2651, FC234, FC300, FC321, FC350, FC355, FC558, FC802). . . . . . . . . . . . 833 SOCKETLESS (2556, FC332, FC647, Easy Couple) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 834 Marine Steering (MSH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 837
761
Hose Fittings
Eatons Aeroquip Hose and Fitting Assembly Product Warning Flexible hose lines offer many advantages over rigid tubing including routing ease, vibration absorption, sound deafening and the ability to accommodate movement of connected components. However, hose lines require caution in use not only to provide long service, but also to guard against potentially dangerous failure. Important The user should carefully observe the precautions listed in this catalog, including the recommendations on the selection of hose and fittings on the relevant pages, and the pages on fluid compatibility. In addition, care should be taken not to exceed the minimum bend radius listed for each hose size and type in the hose section. Maximum operating pressure should not exceed pressures listed in the hose data. Instructions for assembling fittings to different hose should be followed carefully to ensure the performance of the completed assembly.
WARNING
Eaton fitting tolerances are engineered to match Eatons Aeroquip hose tolerances. The use of Eaton fittings on hose supplied by other manufacturers and/or the use of Eatons Aeroquip hose with fittings supplied by other manufactures may result in the production of unreliable and unsafe hose assemblies and is neither recommended nor authorized by Eaton Corporation or any of its affiliates or subsidiaries.
WARNING
Application considerations must be observed in selecting appropriate components for the application of these products contained herein. The failure to follow the recommendations set forth in this catalog may result in an unstable application which may result in serious personal injury or property damage. EATON CORPORATION OR ANY OF ITS AFFILIATES OR SUBSIDIARIES SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGATIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSEQUENTIAL, INCIDENTIAL AND CONTINGENT DAMAGES) ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE AEROQUIP HOSE FITTINGS, HOSE AND AEROQUIP APPROVED EQUIPMENT, AND IN CONFORMANCE WITH EATONS AEROQUIP PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY. Failure to follow these processes and product instructions and limitations could lead to premature hose assembly failures resulting in property damage, serious injury or death.
Fluid Conveying
Hose Application Warnings The determination and methods of the use, suitability, installation and design application for the parts and assemblies we sell is the responsibility of the purchaser. Hose conforms to the specification and requirements specified by the hose manufacturer. Agency and industry standards may apply to your application. It is your responsibility to decide what regulations and/or standards apply, and inform us. We will then advise you if the products selected meet those standards. Improper selection, installation and/or routing may significantly shorten the life of a hydraulic hose, which could result in hose rupture and failure, which may then result in serious personal injury or property damage. If you dont already have the proper training or information, ask for: Eaton/Aeroquip Fluid Conveyance Products Catalog A-HOOV-MC001-E1 Warnings - pages 11-12 Fluid Compatibility - pages 349-355 (this catalog page 1357 ) SAE Recommended Practices (SAE J1273) - page 356 (this catalog page 1355 ) Hose Routing & Installation - page 359 (this catalog page 1364 ) Thread Style Pressure Performance - page 376 (this catalog page 1349 ) Most hydraulic fluids are flammable and proper safeguards have to be taken to contain any fluid if a hose failure occurs in an environment with a source of ignition. Hoses have a service life, and high repetitive shock reduces hose service life. You need to inspect and change out hoses within their service life for your application or hose rupture and failure may occur. S.T.A.M.P. - You must consider the Size, Temperature, Application, Medium and Pressure when selecting hose and hose fittings.
762
Hose Fittings
Steel Crimp 1 & 2 Wire Braid Global TTC Fittings for use with hose: 2661, FC579, FC619, FC639, FC693, FC735, GH195, GH663, GH781, GH793
Catalog Part No. C1AP88 C1AQ18 C1AQ55 C1AQ19 C1AQ56 C1AQ87 C1AQ57 C1AQ88 C1AP58 C1AQ85 C1AQ86 C1AP56 C1AP80 C1AP81 C1AR24 C1AP87
Aeroquip Model 1AA2MP4 1AA4MP4 1AA6MP4 1AA4MP6 1AA6MP6 1AA8MP6 1AA6MP8 1AA8MP8 1AA12MP8 1AA8MP10 1AA8MP12 1AA12MP12 1AA16MP12 1AA16MP16 1AV20MP20 1AA24MP24
Thread 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 3/4-14 1/2-14 3/4-14 1/2-14 3/4-14 1-11-1/2 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2
Hose Size -04 -04 -04 -06 -06 -06 -08 -08 -08 -08 -10 -10 -12 -12 -12 -16 -16 -16 -20 -20 -24 -32
D (in) 0.92 1.14 0.98 1.18 1.28 1.28 1.23 1.32 1.57 1.39 1.58 1.40 1.60 1.65 1.61 1.67 1.86 1.72 1.79 1.79 2.36 2.61
Wt. 0.09 0.10 0.12 0.14 0.17 0.21 0.19 0.22 0.28 0.26 0.30 0.31 0.40 0.45 0.57 0.76 0.76 0.75 1.02 0.95 1.61 2.68
Price Each
MP Male Pipe
C1AQ20 1AA4MP8
C1AP55 1AA12MP10
C1AP57 1AA12MP16 C1AP84 1AA20MP16 C1JD27 1AR20MP20 C1AP90 1AA32MP32
Fluid Conveying
Catalog Part No. C1AQ22 C1AQ59 C1AQ90 C1AQ91 C1AP60 C1AP82
Aeroquip Model 1AA4PS4 1AA6PS6 1AA8PS6 1AA8PS8 1AA12PS12 1AA16PS16
Thread 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 3/4-14 1-11-1/2
Hose Size -04 -06 -06 -08 -08 -12 -16
D (in) 1.62 1.67 1.85 1.71 1.96 2.05 2.53
Wt. 0.15 0.22 0.28 0.25 0.31 0.56 0.94
Price Each
PS Male Pipe Swivel
C1AQ60 1AA6PS8
Catalog Part No. C1KJ22 C1KJ26
Aeroquip Model 1AA6PSB6 1AA8PSB8
Thread 3/8-18 1/2-14
Hose Size -06 -08
D (in)
A (in)
B (in)
Wt. 0.30 0.48
Price Each
1.33 2.33 1.80 1.51 2.68 2.05
PSB Male Pipe Swivel 90 Elbow
1AA part numbers fit both 1wire & 2wire braid (GH663, GH781, GH793, GH195). 1AP & 1AR part numbers fit 1wire braid (GH663). 1AT & 1AV part numbers fit 2wire braid (GH781, GH793, GH195).
763
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 1/4-18 3/8-18 1/2-14
Hose Size -04 -06 -08
D (in) 1.95 1.97 2.41
Wt. 0.21 0.29 0.46
Price Each
C1FW43 1AA4PF4 C1FW44 1AA6PF6
PF Female Pipe Swivel
C1FW45 1AA8PF8
Catalog Part No. C1KJ21 C1KJ25
Aeroquip Model 1AA4SP4 1AA6SP6 1AA8SP8 1AA12SP12
Thread 1/4-18 3/8-18 1/2-14 3/4-14
Hose Size -04 -06 -08 -12
D (in)
A (in)
Wt. 0.80 0.10 0.20 0.40
Price Each
1.09 1.88 1.20 2.04 1.41 2.40 1.56 2.62
SP Female Straight Pile Swivel (NPSM)
C1KJ29 C1KJ18
Fluid Conveying
Catalog Part No. C1FJ69 C1AP91 C1AQ23 C1AQ28 C1AP93 C1AQ29 C1AQ61 C1AQ62 C1AP16 C1AP37 C1FA32 C1AP14 C1AP33 C1AP15 C1AP34 C1AP63 C1AP36 C1AP64 C1AR14 C1AP85 C1AP89
Aeroquip Model 1AA3FJ4 1AA4FJ4 1AA5FJ4 1AA6FJ4 1AA4FJ6 1AA6FJ6 1AA8FJ6 1AA8FJ8 1AA10FJ8 1AA12FJ8 1AA8FJ10 1AA10FJ10 1AA12FJ10 1AA10FJ12 1AA12FJ12 1AA16FJ12 1AA12FJ16 1AA16FJ16 1AV20FJ20 1AA24FJ24 1AA32FJ32
Thread 3/8-24 7/16-20 1/2-20 9/16-18 7/16-20 1/2-20 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-1/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-5/8-12 1-7/8-12 2-1/2-12
Hose Size -04 -04 -04 -04 -06 -06 -06 -06 -08 -08 -08 -10 -10 -10 -12 -12 -12 -12 -16 -16 -16 -20 -20 -24 -32
D (in) 1.02 1.07 1.06 1.11 1.19 1.24 1.28 1.31 1.46 1.47 1.56 1.50 1.61 1.57 1.63 1.65 1.65 1.72 1.80 1.93 1.81 1.88 1.88 2.07 2.37
Wt. 0.21 0.09 0.09 0.11 0.09 0.30 0.15 0.15 0.18 0.23 0.26 0.34 0.29 0.32 0.37 0.37 0.45 0.48 0.51 0.69 0.76 0.98 1.24 0.10 1.91 2.50
Price Each
C1KA18 1AA6FJ8
FJ Female JIC 37 Swivel
C1FF48 1AA5FJ6
C1AP61 1AA14FJ12
C1AP83 1AA20FJ16 C1AQ92 1AR20FJ20
764
Hose Fittings
Catalog Part No. C1AP94 C1AQ31 C1AQ32
Aeroquip Model 1AA4FJA4 1AA6FJA4 1AA6FJA6 1AA8FJA6 1AA8FJA8 1AA10FJA8 1AA10FJA10 1AA12FJA12 1AA16FJA16 1AV20FJA20
Thread 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/8-12
Hose Size -04 -04 -06 -06 -08 -08 -10 -10 -12 -16 -20
D (in)
H (in)
Wt. 0.10 0.32 0.32 0.20 0.25 0.31 0.35 0.48 0.55 0.93 1.61
Price Each
1.04 0.33 1.17 0.39 1.31 0.39 1.66 0.55 1.65 0.55 1.86 0.59 1.79 0.59 2.22 0.78 2.24 0.78 2.39 1.07 2.71 1.22
FJA Female JIC 37 Swivel 45 Elbow
C1AQ64 C1AQ65 C1AP18 C1AP17 C1AP38 C1AP66 C1AR15
C1ES66 1AA12FJA10
Catalog Part No. C1AP95 C1AQ33
Aeroquip Model 1AA4FJB4 1AA6FJB4 1AA6FJB6 1AA8FJB6 1AA8FJB8 1AA10FJB8 1AA10FJB10 1AA12FJB12 1AA16FJB16 1AV20FJB20
Thread 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-7/8-12
Hose Size -04 -04 -04 -06 -06 -08 -08 -10 -10 -12 -12 -16 -20 -24
D (in) 1.0
H (in) 0.76
Wt. 0.10 0.11 0.12 0.17 0.21 0.25 0.75 0.37 0.55 0.60 0.82 0.79 1.77 4.00
Price Each
Fluid Conveying
0.92 0.68 1.08 0.84 1.22 0.84 1.42 1.09 1.42 0.84 1.61 1.19 1.55 1.19 2.16 1.80 2.17 1.80 2.18 2.39 2.2 2.39 2.52 2.75 2.81 3.17
C1AQ25 1AA5FJB4 C1AQ34 C1AQ66 C1AQ67 C1AP20 C1AP19 C1AP40 C1AP68 C1AR16
FJB Female JIC 37 Swivel 90 Elbow
C1AP39 1AA12FJB10 C1AP67 1AA16FJB12
C1EW18 1AA24FJB24
Catalog Part No. C1AP96 C1AQ37 C1AQ68 C1AP21
Aeroquip Model 1AA4FJC4 1AA6FJC6 1AA8FJC8 1AA10FJC8 1AA12FJC12
Thread 7/16-20 9/16-18 9/16-18 3/4-16 7/8-14 7/8-14 1-1/16-12 1-5/16-12
Hose Size -04 -04 -06 -08 -08 -10 -12 -16
D (in)
H (in)
Wt. 0.10 0.14 0.19 0.26 0.38 0.21 0.69 1.25
Price Each
0.92 1.80 1.23 2.18 1.54 2.45 1.61 2.57 1.54 2.57 2.17 2.2 3.7 4.58
C1AQ36 1AA6FJC4
FJC Female J.I.C. 37 Swivel 90 Long Drop Elbow
C1ZZ17 1AA10FJC10 C1AP41 C1AP69 1AA16FJC16
765
Hose Fittings
Catalog Part No. C1AQ17
Aeroquip Model 1AA4MJ4 1AA6MJ4 1AA6MJ6 1AA8MJ6 1AA8MJ8 1AA10MJ8 1AA12MJ8 1AA10MJ10 1AA12MJ10 1AA12MJ12 1AA16MJ12 1AA16MJ16
Thread 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-7/8-12
Hose Size -04 -04 -04 -06 -06 -08 -08 -08 -10 -10 -12 -12 -12 -16 -20 -24
D (in) 1.07 0.92 0.93 1.17 1.11 1.41 1.26 1.42 1.57 1.43 1.75 1.54 1.56 1.90 2.16 2.49
Wt. 0.10 0.08 0.09 0.13 0.16 0.22 0.23 0.33 0.31 0.35 0.41 0.40 0.52 0.75 1.28 1.85
Price Each
C1AQ27 1AA5MJ4
MJ Male JIC 37
C1AQ53 C1AQ54 C1AQ83 C1AQ84 C1AP32 C1AP54 C1AP31 C1AP52 C1AP53 C1AP78 C1AP79
C1AP62 1AA14MJ12
C1AR23 1AV20MJ20 C1AP86 1AA24MJ24
Fluid Conveying
Catalog Part No. C1AQ47 C1AQ77
Aeroquip Model 1AA6FS6 1AA8FS8
Thread 5/8-18 3/4-16 1-1/16-14
Hose Size -06 -08 -12
D (in) 1.31 1.46 1.65
Wt. 0.16 0.23 0.44
Price Each
FS Female SAE 45 Swivel
C1AP50 1AA12FS12
Catalog Part No. C1AQ13
Aeroquip Model 1AA4MB4
Thread 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12
Hose Size -04 -04 -04 -06 -06 -08 -08 -08 -12 -12 -16
D (in) 0.92 0.92 0.86 1.0 0.98 1.19 1.09 1.22 1.25 1.37 1.39
Wt. 0.09 0.10 0.10 0.16 0.18 0.22 0.24 0.32 0.36 0.53 0.69
Price Each
C1AQ26 1AA5MB4
MB Male O-Ring Boss
C1AQ48 1AA6MB4 C1AQ49 C1AQ78 C1AQ79 C1AP30 C1AP51 1AA6MB6 1AA8MB6 1AA8MB8 1AA10MB8 1AA12MB12
C1FQ65 1AA12MB8
C1AP76 1AA16MB12 C1AP77 1AA16MB16
766
Hose Fittings
Catalog Part No. C1KJ20 C1KJ23 C1KJ27 C1KJ14
Aeroquip Model 1AA4SB4 1AA6SB6 1AA8SB8 1AA10SB8
Thread 7/16-20 9/16-18 3/4-16 7/8-14
Hose Size -04 -06 -08 -08
D (in)
A (in)
Wt. 0.16 0.20 0.33 0.34
Price Each
1.59 2.52 1.73 2.72 1.84 3.01 1.86 3.03
SB Male Straight Thread O-Ring Swivel
Catalog Part No. C1KJ24 C1KJ28 C1KJ15 C1KJ17
Aeroquip Model 1AA6SBB6 1AA8SBB8 1AA10SBB8 1AA12SBB1 2
Thread 9/16-18 3/4-16 7/8-14 1-1/16-12
Hose Size -06 -08 -08 -12
D (in)
A (in)
B (in)
Wt. 0.40 0.50 0.50 1.20
Price Each
1.33 2.33 1.87 1.51 2.68 1.93 1.51 2.68 1.97 2.53 3.72 2.65
SBB Male Straight Thread O-Ring Swivel 90 Elbow
Fluid Conveying
Catalog Part No. C1AP97 C1AQ38
Aeroquip Model 1AA4FR4 1AA6FR4 1AA6FR6 1AA8FR6 1AA8FR8
Thread 9/16-18 11/16-16 9/16-18 11/16-16 13/16-16 11/16-16 13/16-16 1-14 1-3/16-12 1-14 1-3/16-12 1-14 1-3/16-12 1-7/16-12 1-7/16-12 1-11/16-12 1-11/16-12 2-12
Hose Size -04 -04 -06 -06 -06 -08 -08 -08 -08 -10 -10 -12 -12 -12 -16 -16 -20 -24
D (in) 1.03 1.12 1.15 1.24 1.32 1.34 1.50 1.47 1.63 1.61 1.63 1.62 1.62 1.79 1.94 1.90 2.33 2.19
Wt. 0.12 0.14
Price Each
FR Female ORS Swivel
C1AP98 1AA4FR6 C1AQ39 C1AQ69 C1AQ70
0.18 0.17 0.23 0.25 0.57 0.36 0.54 0.39 0.55 0.48 0.58 0.82 1.25 1.04 1.51 1.92
C1AQ40 1AA6FR8 C1AP24 1AA10FR8 C1AP44 1AA12FR8 C1AP22 1AA10FR10 C1AP42 1AA12FR10 C1AP23 1AA10FR12 C1AP43 C1AP71 1AA12FR12 1AA16FR16 C1AP70 1AA16FR12 C1ZU23 1AA20FR16 C1AR18 1AV20FR20 C1FW42 1AA24FR24
767
Hose Fittings
Catalog Part No. C1AP99 C1AQ41 C1AQ42 C1AQ72 C1AP26 C1AP25 C1AP46
Aeroquip Model 1AA4FRA4 1AA6FRA4 1AA6FRA6 1AA8FRA8 1AA10FRA8 1AA10FRA10 1AA12FRA12
Thread 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-14 1-3/16-12 1-3/16-12 1-7/16-12 1-11/16-12
Hose Size -04 -04 -06 -06 -08 -08 -10 -10 -12 -16 -20
D (in)
H (in)
Wt. 0.11 0.15 0.17 0.23 0.28 0.35 0.40 0.10 0.53 1.03 1.48
Price Each
1.20 0.41 1.38 0.43 1.43 0.41 1.74 0.59 1.79 0.59 2.01 0.65 2.02 0.65 2.36 0.83 2.38 0.83 2.88 0.94 3.37 1.0
FRA Female ORS Swivel 45 Elbow
C1AQ71 1AA8FRA6
C1AP45 1AA12FRA10 C1AP72 1AA16FRA16 C1AR19 1AV20FRA20
Catalog Part No. C1AQ11 C1AQ43 C1AQ44 C1AQ73 C1AQ74 C1AP28 C1AP27 C1AP47 C1AP48 C1AP74
Aeroquip Model 1AA4FRB4 1AA6FRB4 1AA6FRB6 1AA8FRB6 1AA8FRB8 1AA10FRB8 1AA10FRB10 1AA12FRB10 1AA12FRB12 1AA16FRB16
Thread 9/16-18 11/16-16 11/16-16 13/16-16 11/16-16 13/16-16 1-14 1-14 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12 1-11/16-12
Hose Size -04 -04 -06 -06 -08 -08 -08 -10 -10 -12 -12 -16 -20
D (in)
H (in)
Wt. 0.12 0.15 0.18 0.30 0.25 0.29 0.37 0.42 0.59 0.60 0.94 1.03 1.72
Price Each
1.17 0.82 1.30 0.90 1.34 0.90 1.62 1.15 1.39 0.90 1.67 1.15 1.91 1.27 1.91 1.27 2.29 1.88 2.3 1.88 2.85 2.21 2.87 2.21 3.57 2.51
Fluid Conveying
FRB Female ORS Swivel 90 Short Drop Elbow
C1ZU22 1AA6FRB8
C1AP73 1AA16FRB12 C1AR20 1AV20FRB20
Catalog Part No.
Aeroquip Model
Thread 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12
Hose Size -04 -04 -06 -06 -08 -10 -12 -16
D (in)
H (in)
Wt. 0.50 0.18 0.21 0.30 0.32 0.10 0.72 1.38
Price Each
C1AQ12 1AA4FRC4 C1AQ45 1AA6FRC4 C1AQ46 1AA6FRC6 C1AQ75 1AA8FRC6
1.17 1.80 1.30 2.13 1.34 2.13 1.71 2.55 1.70 2.55 1.91 2.76 2.29 3.78 2.86 4.5
FRC Female ORS Swivel 90 Long Drop Elbow
C1AQ76 1AA8FRC8 C1AP29 1AA10FRC10 C1AP49 1AA12FRC12 C1AP75 1AA16FRC16
768
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 9/16-18 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-3/16-12 1-7/16-12
Hose Size -04 -06 -06 -08 -08 -10 -12 -12
D (in) 0.86 0.99 1.95 1.13 1.17 1.24 1.44 1.34
Wt. 0.10 0.15 0.17 0.25 0.28 0.40 0.49 0.55
Price Each
C1AQ21 1AA4MR4
MR Male ORS
C1AQ58 1AA6MR6 C1FD32 1AA8MR6 C1AQ89 C1KJ16 C1AP59 1AA8MR8 1AA12MR10 1AA12MR12 C1GN16 1AA10MR8
C1HJ24 1AA16MR12
Catalog Part No.
Aeroquip Model
Thread 7/16-24 5/8-18 3/4-18
Hose Size -04 -06 -08
D (in) 1.46 1.61 1.62
Wt. 0.09 0.15 0.22
Price Each
C1AQ14 1AA4MF4
MF Male SAE Inverted Flare Swivel
C1AQ50 1AA6MF6 C1AQ80 1AA8MF8
Fluid Conveying
Catalog Part No.
Aeroquip Model
Thread 7/16-24 5/8-18
Hose Size -04 -06
D (in)
H (in)
Wt. 0.09 0.16
Price Each
C1AQ15 1AA4MFA4 C1AQ51 1AA6MFA6
1.75 0.96 1.88 0.96
MFA Male SAE Inverted Flare Swivel 45 Elbow

Catalog Part No. Aeroquip Model Thread 7/16-24 5/8-18 3/4-18 Hose Size -04 -06 -08 D (in) H (in) Wt. 0.09 0.16 0.23 Price Each
C1AQ16 1AA4MFB4 C1AQ52 1AA6MFB6 C1AQ82 1AA8MFB8
1.37 1.69 1.51 1.73 1.56 1.75
MFB Male SAE Inverted Flare Swivel 90 Elbow
769
Hose Fittings
Catalog Part No.
Aeroquip Model Flange Head Dia. 1.19 1.50 1.50 1.75 1.75 2.00 2.00 2.38 2.38 2.81
Hose Size -08 -08 -12 -12 -16 -16 -20 -20 -24 -32
D (in) 2.06 2.1 2.12 2.12 2.14 2.44 2.51 2.54 2.58 2.63
Wt. 0.36 0.52 0.61 0.58 0.81 1.06 2.44 1.65 1.85 2.21
Price Each
C1AN99 1A8FL8 C1AM99 1A12FL8
FL SAE Code 61 Split Flange
C1AM98 1A12FL12 C1AN27 1A16FL12 C1AN28 1A16FL16 C1AN42 1A20FL16 C1AQ93 1AT20FL20 C1AQ97 1AT24FL20 C1AN45 1A24FL24 C1AN53 1A32FL32 Note: Flange O-Rings page 1098 Catalog Part No.
Aeroquip Model
Flange Head Dia. 1.50 1.75 1.75 2.00 2.00 2.38 2.81
Hose Size -12 -12 -16 -16 -20 -24 -32
D (in)
H (in)
Wt. 0.53 0.63 0.92 1.07 1.39 1.91 3.00
Price Each
C1AN11 1A12FLA12 C1AN29 1A16FLA12 C1AN30 1A16FLA16
2.48 1.01 2.97 1.06 3 1.06 3.45 1.15 3.55 1.18 4.25 1.41 5.52 2.0
Fluid Conveying
FLA SAE Code 61 Split Flange 45 Elbow
C1AN43 1A20FLA16 C1AQ94 1AT20FLA20 C1AN46 1A24FLA24 C1AN55 1A32FLA32 Note: Flange O-Rings page 1098 Catalog Part No.
Aeroquip Model
Flange Head Dia. 1.19 1.50 1.50 1.50 1.75 1.75 2.00 2.38 2.00 2.38 2.38 2.81 2.81
Hose Size -08 -08 -10 -12 -12 -16 -16 -16 -20 -20 -24 -24 -32
D (in)
H (in)
Wt. 0.31 0.39 0.50 0.58 0.59 1.04 1.21 1.51 1.50 1.85 2.15 2.84 3.42
Price Each
C1ZZ18 1A8FLB8 C1AN14 1A12FLB8 C1AN12 1A12FLB10 C1AN13 1A12FLB12
1.69 1.63 2.28 2.13 2.29 2.13 2.3 2.13 2.84 2.38 2.86 2.38 3.5 2.62 4.24 3.12 3.57 2.62 4.31 3.12 4.35 3.12 5.45 5.49 4.5 4.5
FLB SAE Code 61 Split Flange 90 Elbow
C1AN31
1A16FLB12
C1AN32 1A16FLB16 C1AN44 1A20FLB16 C1AN47 1A24FLB16 C1AQ95 1AT20FLB20 C1AQ99 1AT24FLB20 C1AN48 1A24FLB24 C1AN56 1A32FLB24 C1AN57 1A32FLB32 Note: Flange O-Rings page 1098
770
Hose Fittings
Catalog Part No. C1JD20 1A6MC4 C1JD23 1A8MC8
Aeroquip Model
D1 (in) 0.26 0.38 0.50 0.61
Hose Size -04 -08 -10 -12
L2 (in) 1.19 1.44 1.56 1.75
Wt. 0.11 0.28 0.16 0.40
Price Each
C1JD11 1A10MC10
MC Male STC
C1JD14 1A12MC12 Release Tools: page 752 Catalog Part No. D1 (in) 0.26 0.35 0.55
Aeroquip Model
Hose Size -06 -08 -12
L2 L3 (in) (in) 1.87 0.87 2.37 1.17 3.15 1.60
Wt. 0.16 0.28 0.61
Price Each
C1JD21 1A6MCA6 C1JD24 1A8MCA8 C1JD18 1A12MCA12 Release Tools: page 752
MCA Male STC 45 Elbow

Catalog Part No. Aeroquip Model D1 (in) 0.26 0.35 0.55 Hose Size -06 -08 -12 L2 L3 (in) (in) 1.34 1.56 1.67 2.09 2.30 2.98 Wt. 0.10 0.08 0.67 Price Each
C1JD41 1A6MCB6 C1JD25 1A8MCB8 C1JD19 1A12MCB12 Release Tools: page 752
Fluid Conveying
MCB Male STC 90 Elbow Miscellaneous Products

Catalog Part No. C1AN58 C1AN72 C1AN87 Aeroquip Model 1A4BF4 1A6BF6 1A8BF8 Thread G 1/4 G 3/8 G 1/2 G 1/2 G 5/8 G 5/8 G 3/4 G1 G 1-1/4 Hose Size -04 -06 -06 -08 -08 -10 -12 -16 -20 24.7 25.3 27.6 29.6 D (mm) 18.9 21.1 21.1 23.8 Wt. 0.11 0.17 0.22 0.25 0.31 0.33 0.66 0.70 1.10 Price Each
C1AN86 1A8BF6 C1AM73 1A10BF8
BF BSP (British) Female Swivel (1 Hex)
C1EM29 1A10BF10 C1AM88 C1AN18 1A12BF12 1A16BF16
C1HY93 1AT20BF20
Catalog Part No.
Aeroquip Model
Thread G 1/4 G 3/8 G 1/2 G 3/4 G1
Hose Size -04 -06 -08 -12 -16
D H (mm) (mm) 41.9 48.5 61.8 78.6 92.4 16.5 19 24.8 29.4 33.2
Wt. 0.15 0.20 0.32 0.66 0.98
Price Each
C1AN59 1A4BFA4 C1AN73 1A6BFA6
BFA BSP (British) Female Swivel 45 Elbow
C1AN88 1A8BFA8 C1AM89 1A12BFA12 C1GK99 1A16BFA16
771
Hose Fittings
Catalog Part No. C1AN60 C1AN74 C1AN89
Aeroquip Model 1A4BFB4 1A6BFB6 1A8BFB8
Thread G 1/4 G 3/8 G 1/2 G 1/2 G 5/8 G 3/4 G1
Hose Size -04 -06 -06 -08 -10 -12 -16
D H (mm) (mm) 33 38.8 49.3 50.5 61.2 69.1 83.8 31 36.6 48.5 48.5 56.3 61.5 71.5
Wt. 0.12 0.21 0.29 0.35 0.50 0.66 1.07
Price Each
C1EV58 1A8BFB6 C1AM74 1A10BFB10 C1AM90 1A12BFB12 C1AN19 1A16BFB16
BFB BSP (British) Female Swivel 90 Elbow
Fluid Conveying
Catalog Part No. C1AN61
Aeroquip Model 1A4BP4
Thread G 1/4 G 3/8 G 1/2 G 1/2 G 3/4
Hose Size -04 -06 -06 -08 -12
D (mm) Wt. 20.9 23.1 27.1 28.3 32.9 0.09 0.14 0.20 0.25 0.40
Price Each
C1AN75 1A6BP6 C1AN91 1A8BP6 C1AN92 1A8BP8 C1EM30 1A12BP12
BP BSP (British) Male Parallel

Catalog Part No. C1KH99 Aeroquip Model 1A6TE6 1A8TE8 Tube O.D.(in) 1/4 3/8 1/2 Hose Size -04 -06 -08 D (in) A (in) B (in) Wt. 0.07 0.09 0.19 Price Each
C1KH98 1A4TE4 C1KJ13
1.40 2.19 1.00 1.52 2.35 1.00 1.70 2.69 1.10
TE Standpipe Straight Tube
772
Hose Fittings
Catalog Part No. C1KJ12 C1AN77 C1AN94 C1AM77 C1AM93 C1AN21
Aeroquip Model 1A8DL4 1A6DL4 1A8DL6 1A10DL6 1A12DL8 1A16DL10
Thread (mm) M16 x 1.5 M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5 M26 x 1.5 M30 x 2 M36 x 2 M45 x 2 M52 x 2
Tube O.D. (mm) 10 6 8 10 12 15 18 22 28 35 42
Hose Size -04 -04 -04 -06 -06 -08 -10 -12 -16 -20 -24
D (mm) 24.9 24.6 22.6 31.6 25.9 28.6 29.8 32.3 33.8 39.7 40.9
Wt. 0.09 0.12 0.10 0.20
Price Each
C1AN66 1A5DL4
DL DKO (German DIN 3902) Female Swivel, Light Duty
0.17 0.26 0.36 0.50 0.72 1.21 1.71
C1AN37 1A20DL12 C1AN49 1A25DL16 C1AR11 1AT32DL20 C1FV48 1A40DL24
Catalog Part No.
Aeroquip Model
Thread (mm) M16 x 1.5 M18 x 1.5 M22 x 1.5 M26 x 1.5
Tube D H O.D. Hose (mm) Size (mm) (mm) Wt. 10 12 15 18 -06 -06 -08 -10 41.5 44.5 52.0 59 19.0 0.18 20.5 0.25 21.5 0.32 27.5 0.40
Price Each
C1HK66 1A8DLA6 C1AM78 1A10DLA6 C1ES65 1A12DLA8 C1AN22 1A16DLA10
Fluid Conveying
DLA DKO (German DIN 3902) Female Swivel, Light Duty 45 Elbow
Catalog Part No. C1AN79 C1AN95 C1AM94 Thread (mm) M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5 M26 x 1.5 M30 x 2 M36 x 2 Tube O.D. Hose D H (mm) Size (mm) (mm) Wt. 6 8 10 12 15 18 22 28 -04 -04 -06 -06 -08 -10 -12 -16 26.5 28.5 32 35 42.3 53.5 64.8 120 26.5 0.13 3.5 39 43 59 54 71 0.12 0.23 0.33 0.55 0.75 0.95 35.5 0.20 Price Each
Aeroquip Model 1A6DLB4 1A8DLB6 1A12DLB8
C1AN67 1A5DLB4
C1AM79 1A10DLB6
DLB DKO (German DIN 3902) Female Swivel, Light Duty 90 Elbow
C1AN23 1A16DLB10 C1AN39 1A20DLB12 C1AN50 1A25DLB16
773
Hose Fittings
Catalog Part No. C1KJ11 C1AN93 C1AM75
Aeroquip Model 1A8DK4 1A8DK6 1A10DK6 1A12DK8
Thread (mm) M14 x 1.5 M16 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5 M26 x 1.5 M30 x 2
Tube O.D. (mm) 8 10 10 12 15 18 22
Hose Size -04 -04 -06 -06 -08 -10 -12
D (mm) 21.1 22.6 26.7 23.7 26.3 26.6 31.8
Wt. 0.08 0.09 0.14 0.15 0.21 0.27 0.39
Price Each
C1AN76 1A6DK4
C1AM92
C1AN20 1A16DK10
DK German DIN 3902 24 Male, Light Duty
C1AN36 1A20DK12
Aeroquip Model 1A5DS4
Thread (mm) M16 x .5 M18 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M22 x 1.5 M24 x 1.5 M30 x 2 M36 x 2
Tube O.D. (mm) 8 10 10 12 14 14 16 20 25
Hose Size -04 -04 -06 -06 -06 -08 -08 -10 -12
D (mm) 26.2 27.4 28.5 31.6 32.7 37.5 41.8
Wt. 0.12 0.16 0.18 0.20 0.27 0.28 0.34 0.55 0.84
Price Each
C1AN80 1A6DS4
Fluid Conveying
C1HH70 1A6DS6 C1AN96 1A8DS6 C1AM80 1A10DS6 C1AM81 1A10DS8 C1AM95 1A12DS8 C1AN24 1A16DS10 C1AN40 1A20DS12
DS DKO (German DIN 3902) Female Swivel, Heavy Duty
Catalog Part No.
Aeroquip Model
Thread (mm) M18 x 1.5 M24 x 1.5
Tube D H O.D. Hose (mm) Size (mm) (mm) Wt. 10 16 -04 -08 38 50 17 23 0.17 0.40
Price Each
C1FR64 1A6DSA4 C1EV57 1A12DSA8
DSA DKO (German DIN 3902) Female Swivel, Heavy Duty 45 Elbow
774
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread (mm) M16 x .5 M18 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M24 x 1.5 M30 x 2 M36 x 2
Tube O.D. Hose D H (mm) Size (mm) (mm) Wt. 8 10 6 12 14 16 20 25 -04 -04 -06 -06 -06 -08 -10 -12 35 38.5 44 52.6 62.8 35 42 49 31 0.13 33.5 0.12 0.22 0.23
Price Each
C1AN69 1A5DSB4 C1AN81 1A6DSB4 C1HH71 1A6DSB6 C1AN97 1A8DSB6 C1AM82 1A10DSB6
0.31 0.42
DSB DKO (German DIN 3902) Female Swivel, Heavy Duty 90 Elbow
C1AM96 1A12DSB8 C1AN25 1A16DSB10 C1AN41 1A20DSB12
53.5 0.62 64.5 1.25
Catalog Part No.
Aeroquip Model
Thread (mm) M16 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M24 x 1.5 M30 x 2 M36 x 2 M42 x 2
Tube O.D. (mm) 8 10 12 14 16 20 25 30
Hose Size -04 -04 -06 -06 -08 -10 -12 -16
D (mm) 24.1 23.6 25 27.3 28.3 32.6 35.3 37.9
Wt. 0.05 0.12 0.16 0.20 0.25 0.38 0.57 0.84
Price Each
C1AN70 1A5EK4 C1AN82 1A6EK4 C1AN98 1A8EK6 C1AM83 1A10EK6 C1AM97 1A12EK8 C1AN26 1A16EK10
Fluid Conveying
EK German DIN 3902 24 Male, Heavy Duty
C1FF46 1A20EK12 C1FL13 1A25EK16
Catalog Part No.
Aeroquip Model
Bolt Size (mm) 8 MM 12 MM
Hose Size -06 -08
D (mm)
Wt. 0.18 0.31
Price Each
C1AN90 1A8BJ6
BJ Metric Banjo
C1AM91 1A12BJ8
Aeroquip Model 1A4JF4
Thread G 1/4 G 3/8 G 1/2 G 3/4 G1
Hose Size -04 -06 -08 -12 -16
D (mm) Wt. 29.8 33.9 36.6 43.1 49.2 0.14 0.21 0.31 0.60 0.95
Price Each
C1AN83 1A6JF6 C1AP11 1A8JF8
JF JIS (Japanese JIS 30 Female Seat) Female Swivel
C1AN15 1A12JF12 C1AN33 1A16JF16
775
Hose Fittings
Catalog Part No. C1AN64 C1AP13 C1AN17
Aeroquip Model 1A4KF4 1A8KF8 1A12KF12
Thread M14 x 1.5 M18 x 1.5 M22 x 1.5 M24 x 1.5 M30 x 1.5 M33 x 1.5
Hose Size -04 -06 -08 -10 -12 -16
D (mm) Wt. 32.7 35.1 39.8 46 51.3 57 0.15 0.22 0.32 0.50 0.68 0.99
Price Each
C1AN85 1A6KF6
KF Komatsu Female Swivel
C1AM84 1A10KF10 C1AN35 1A16KF16
Catalog Part No.
Aeroquip Model
Flange Head Dia. (mm) 34.2
Hose Size -10
D (mm) 65.4
Wt. 0.38
Price Each
C1AM85 1A10KS10
KS Komatsu Split Flange

Catalog Part No. Flange Head Hose D H Dia. (mm) Size (mm) (mm) 34.2 -10 47.3 21.8 Price Each
Fluid Conveying
Aeroquip Model
Wt. 0.37
C1AM86 1A10KSA10
KSA Komatsu Split Flange 45 Elbow
776
Hose Fittings
Steel Crimp Spiral Global TTC-12 Fittings for use with hose: 2661(-12), FC619 (-12), FC636, GH493
Catalog Part No. C1AT13 C1AS42
Aeroquip Model 1BA8MP8 1BA12MP12 1BA16MP16
Thread 1/2-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2
Hose Size -08 -12 -12 -16 -16 -20 -24 -32
D (in) 1.56 1.65 1.61 1.67 1.72 1.79 2.36 2.58
Wt. 0.34 0.50 0.85 0.90 0.85 1.20 1.62 3.00
Price Each
MP Male Pipe
C1AS61 1BA16MP12 C1AS62 C1AS76 1BA20MP16 C1AS77 1BA20MP20 C1AS83 1BA24MP24 C1AS85 1BA32MP32
Catalog Part No.
Aeroquip Model
Thread 9/16-18 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-5/16-12 1-1/16-12 1-5/16-12 1-5/8-12 1-5/16-12 1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12
Hose Size -06 -08 -08 -08 -10 -10 -12 -12 -12 -16 -16 -16 -20 -20 -20 -24 -32
D (in) 1.28 1.46 1.47 1.56 1.61 1.57 1.63 1.65 1.72 1.80 1.93 1.81 1.73 1.88 2.03 2.07 2.33
Wt. 0.03 0.45 0.31 0.40 0.05 0.39 0.43 0.49 0.54 0.80 0.87 1.11 1.20 1.44 1.50 1.65 2.90
Price Each
C1AS86 1BA6FJ6 C1AS93 1BA8FJ8
C1AS25 1BA10FJ8 C1AS32 1BA12FJ8 C1AS23 1BA10FJ10 C1AS29 1BA12FJ10 C1AS24 1BA10FJ12 C1AS30 C1AS46 C1AS47 C1AS65 C1DV48 C1AS66 C1AS79 1BA12FJ12 1BA16FJ12 1BA16FJ16 1BA20FJ16 1BA16FJ20 1BA20FJ20 1BA24FJ24
Fluid Conveying
C1AS31 1BA12FJ16
C1AS78 1BA24FJ20 C1AS84 1BA32FJ32
Catalog Part No. C1JN77 C1AS33
Aeroquip Model 1BA10FJA8 1BA12FJA12 1BA16FJA16 1BA20FJA20
Thread 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12
Hose Size -08 -08 -12 -16 -20
D (in)
H (in)
Wt. 0.37 0.41 0.55 0.69 2.20
Price Each
C1AS94 1BA8FJA8
2.13 0.95 2.18 1.00 2.62 1.16 3.36 1.53 3.72 1.70
C1AS48 C1AS67
777
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-7/8-12
Hose Size -06 -06 -08 -08 -10 -10 -12 -12 -16 -20 -24
D (in)
H (in)
Wt. 0.21 0.50 0.39 0.43 0.39 0.55 0.68 1.34 1.40 2.20 3.10
Price Each
C1AS87 1BA6FJB6 C1AS95 1BA8FJB6 C1AS96 1BA8FJB8 C1AS26 1BA10FJB8
1.42 1.50 1.71 1.87 1.70 1.87 1.70 1.93 1.55 1.19 2.18 2.35 2.18 2.35 2.18 2.46 2.7 3.02 3.04 3.4
C1GL11 1BA10FJB10 C1AS34 1BA12FJB10 C1AS35 C1AS50 C1AS68 1BA12FJB12 1BA16FJB16 1BA20FJB20 C1AS49 1BA16FJB12
C1AS80 1BA24FJB24
3.58 3.95
Catalog Part No. C1JL96
Aeroquip Model 1BA8FJC8
Thread 3/4-16 1-1/16-12 1-5/16-12
Hose Size -08 -12 -16
D (in)
H (in)
Wt. 1.90 0.68 1.49
Price Each
1.70 3.33 2.18 4.41 2.7 5.24
Fluid Conveying
C1AS36 1BA12FJC12 C1AS51 1BA16FJC16
FJC Female JIC 37 Swivel 90 Long Drop Elbow

Catalog Part No. C1JL97 C1JN81 C1AS41 Hose Size -08 -08 -08 -12 -12 -16 -20 D (in) 1.41 1.26 1.42 1.75 1.56 1.90 2.16 Price Each
Aeroquip Model 1BA8MJ8 1BA12MJ8 1BA12MJ12
Thread 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12
Wt. 0.27 0.29 0.34 0.48 0.58 0.86 1.49
C1JN78 1BA10MJ8
MJ Male JIC 37
C1AS59 1BA16MJ12 C1AS60 1BA16MJ16 C1AS75 1BA20MJ20
Catalog Part No.
Aeroquip Model
Thread 1-1/16-12 1-5/16-12
Hose Size -12 -16
D (in) 1.25 1.39
Wt. 0.44 0.80
Price Each
C1JR48 1BA12MB12
MB Male O-Ring Boss
C1AS58 1BA16MB16
Note: SAE O-Ring Boss O-Rings page 1099
778
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 11/16-16 13/16-16 1-14 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12 1-11/16-12 1-11/16-12 2-12
Hose Size -06 -08 -10 -10 -12 -12 -16 -16 -20 -24
D (in) 1.24 1.32 1.61 1.63 1.62 1.79 1.94 1.90 2.33 2.21
Wt. 0.19 0.33 0.10 0.55 0.61 0.86 1.06 0.10 1.71 2.09
Price Each
C1AS88 1BA6FR6 C1AS97 1BA8FR8
C1AS27 1BA10FR10 C1GG47 1BA12FR10 C1AS37 C1AS53 C1AS70 1BA12FR12 1BA16FR16 1BA20FR20 C1AS52 1BA16FR12 C1AS69 1BA20FR16 C1AS81 1BA24FR24
Catalog Part No.
Aeroquip Model
Thread 11/16-16 13/16-16 1-3/16-12 1-7/16-12 1-11/16-12
Hose Size -06 -08 -12 -16 -20
D (in)
H (in)
Wt. 0.19 0.33 0.72 1.14 1.77
Price Each
C1AS89 1BA6FRA6 C1AS98 1BA8FRA8 C1AS38 1BA12FRA12
1.43 0.43 1.79 0.59 2.38 0.83 2.88 0.94 3.37 1.0
Fluid Conveying
C1AS54
1BA16FRA16
C1AS71 1BA20FRA20
Catalog Part No.
Aeroquip Model
Thread 11/16-16 11/16-16 1-14 1-3/16-12 1-7/16-12 1-7/16-12 1-11/16-12
Hose Size -06 -08 -10 -12 -12 -16 -20
D (in)
H (in)
Wt. 0.60 0.35 0.43 0.72 0.94 1.30 1.97
Price Each
C1AS90 1BA6FRB6 C1AS99 1BA8FRB8 C1AS28 1BA10FRB10 C1AS39 1BA12FRB12 1BA16FRB16 C1AS55 1BA16FRB12
1.34 0.90 1.39 0.90 1.91 1.27 2.3 1.88 2.85 2.21 2.87 2.21 3.57 2.51
FRB Female ORS Swivel 90 Short Drop Elbow
C1AS56
C1AS72 1BA20FRB20
Catalog Part No.
Aeroquip Model
Thread 1-3/16-12 1-7/16-12 1-11/16-12
Hose Size -12 -16 -20
D (in) 2.86
H (in) 4.5
Wt. 0.80 1.50 2.30
Price Each
C1AS40 1BA12FRC12 C1AS57 1BA16FRC16 C1AS73 1BA20FRC20
2.29 3.78 3.57 5.09
FRC Female ORS Swivel 90 Long Drop Elbow
779
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 1-3/16-12
Hose Size -12
D (in) 1.44
Wt. 0.52
Price Each
C1AS44 1BA12MR12 Note: ORS O-Rings page 1098
MR Male ORS
Catalog Part No. C1AR36 Aeroquip Model Flange Head Dia. 1.19 1.50 1.75 1.75 2.00 2.00 2.38 2.38 2.81 1B12FL12 1B16FL16 Hose Size -08 -12 -12 -16 -16 -20 -20 -24 -32 D (in) 2.06 2.12 2.12 2.14 2.44 2.51 2.54 2.58 2.63 Wt. 0.21 0.50 0.78 0.97 1.09 1.52 1.77 1.83 3.15 Price Each
C1AS20 1B8FL8 C1AR56 1B16FL12
C1AR57
C1AR76 1B20FL16 C1AR77 1B20FL20 C1AR89 1B24FL20 C1AR90 1B24FL24 C1AS13 1B32FL32 Note: Flange O-Rings page 1098
Fluid Conveying
Catalog Part No.
Aeroquip Model
Flange Head Dia. 1.75 1.75 2.00
Hose Size -12 -16 -20
D (in)
H (in)
Wt. 0.73 1.09 1.70
Price Each
C1AR64 1B16FLF12 C1AR65 1B16FLF16 C1EW26 1B20FLF20 Note: Flange O-Rings page 1098
3.19 0.64 3.22 0.64 3.76 0.67
FLF SAE Code 61 Split Flange 30 Elbow
Catalog Part No.
Aeroquip Model
Flange Head Dia. 1.19 1.50 1.50 1.75 1.75 2.00 2.00 2.38 2.37 2.81
Hose Size -08 -08 -12 -12 -16 -16 -20 -20 -24 -32
D (in) 2.5 2.46 3
H (in) 1.0 1.0 1.06
Wt. 0.36 0.46 0.54 0.73 1.15 1.24 0.15 1.86 2.24 3.98
Price Each
C1AS21 1B8FLA8 C1AR40 1B12FLA8 C1AR39 1B12FLA12 C1AR58 1B16FLA12 C1AR59 1B16FLA16 C1AR78 1B20FLA16 C1AR79 1B20FLA20 C1AR91 1B24FLA20 C1AR92 1B24FLA24 C1AS14 1B32FLA32 Note: Flange O-Rings page 1098
1.96 0.78
2.97 1.06 3.46 1.15 3.52 1.15 4.2 5.05 1.41 2.0 4.25 1.41
780
Hose Fittings
Catalog Part No.
Aeroquip Model
Flange Head Dia. 1.50
Hose Size -12
D (in)
H (in)
Wt. 0.65
Price Each
C1AR45 1B12FLG12 Note: Flange O-Rings page 1098
3.23 1.39
FLG SAE Code 61 Split Flange 60 Elbow

Catalog Part No. Aeroquip Model Flange Head Dia. 1.19 1.50 1.50 1.75 1.75 2.00 2.00 2.37 2.37 2.81 Hose Size -08 -10 -12 -12 -16 -16 -20 -20 -24 -32 D (in) 2.3 2.3 H (in) 2.13 2.13 Wt. 0.38 0.25 0.64 0.80 1.09 1.60 1.85 2.18 2.57 4.60 Price Each
C1AS22 1B8FLB8 C1AR41 1B12FLB10 C1AR42 C1AR61 C1AR80 C1AR81 1B12FLB12 1B16FLB16 1B20FLB16 1B20FLB20 C1AR60 1B16FLB12
1.70 1.63
2.84 2.38 2.86 2.38 3.5 2.62 3.57 2.62 4.31 3.12 4.35 3.12 4.72 4.5
Fluid Conveying
C1AR93 1B24FLB20 C1AR94 1B24FLB24 C1AS15 1B32FLB32 Note: Flange O-Rings page 1098 Catalog Part No.
Aeroquip Model Flange Head Dia. 1.63 1.87 2.13 2.13
Hose Size -12 -16 -16 -20
D (in) 2.12 2.14 2.44 2.51
Wt. 0.60 1.10 1.25 1.75
Price Each
C1AR32 1B12FH12 C1AR53 1B16FH16 C1ES69 1B20FH16 C1AR73 1B20FH20 Note: Flange O-Rings page 1098 Catalog Part No.
FH SAE Code 62 Split Flange
Aeroquip Model
Hose Size -12 -16 -20
D (in) 2.46 3
H (in) 1.0 1.06
Wt. 0.65 1.15 1.80
Price Each
C1AR33 1B12FHA12 C1AR54 1B16FHA16 C1AR74 1B20FHA20 Note: Flange O-Rings page 1098
3.52 1.15
FHA SAE Code 62 Split Flange 45 Elbow
781
Hose Fittings
Catalog Part No. C1AR55
Aeroquip Model 1B16FHB16
Flange Head Dia. 1.63 1.87 2.13 2.13 2.50
Hose Size -12 -16 -16 -20 -24
D (in)
H (in)
Wt. 0.69 1.15 1.48 1.94 2.25
Price Each
C1AR34 1B12FHB12 C1EV59 1B20FHB16 C1AR75 1B20FHB20 C1AR88 1B24FHB24
2.30 2.13 2.86 2.38 3.50 2.62 3.57 2.62 4.35 3.12
FHB SAE Code 62 Split Flange 90 Elbow
Note: Flange O-Rings page 1098
Catalog Part No.
Aeroquip Model
Thread G 3/8 G 1/2 G 3/4 G1 G 1-1/4 G 1-1/2
Hose Size -06 -08 -12 -16 -20 -24
D (mm) Wt. 21.1 23.8 25.3 27.6 29.6 33.7 0.30 0.30 0.45 1.67 1.35 1.50
Price Each
C1AS16 1B6BF6 C1AS17 1B8BF8 C1AR27 1B12BF12 C1AR47 1B16BF16 C1AR68 1B20BF20
Fluid Conveying
BF BSP (British) Female Swivel (1 hex)
C1AR85 1B24BF24
Catalog Part No.
Aeroquip Model
Thread G 3/4 G1
Hose Size -12 -16
D H (mm) (mm) Wt. 78.6 29.4 92.4 33.2 0.56 1.09
Price Each
C1ZZ16 1B12BFA12 C1CX79 1B16BFA16
BFA BSP (British) Female Swivel 45 Elbow

Catalog Part No. Hose Size -12 -16 -20 D H (mm) (mm) Wt. 69.1 83.8 61.5 71.5 0.68 1.20 1.92 Price Each
Aeroquip Model
Thread G 3/4 G1 G 1-1/4
C1ZZ15 1B12BFB12
C1ZZ14 1B16BFB16 C1ZV40 1B20BFB20
102.2 82.5
BFB BSP (British) Female Swivel 90 Elbow
782
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread (mm) M22 x 1.5 M26 x 1.5 M30 x 2
Tube O.D. (mm) 15 18 22
Hose Size -08 -10 -12
D (mm) 28.6 29.8 32.3
Wt. 0.10 0.60 1.52
Price Each
C1AR28 1B12DL8 C1AR48 1B16DL10 C1AR69 1B20DL12
DL DKO (German DIN 3902) Female Swivel, Light Duty

Catalog Part No. Aeroquip Model Thread (mm) M24 x 1.5 M30 x 2 M36 x 2 M42 x 2 M52 x 2 Tube O.D. (mm) 16 20 25 30 38 Hose Size -08 -10 -12 -16 -20 D (mm) 32.7 37.5 41.8 44.1 49.7 Wt. 0.05 0.53 0.93 1.27 2.08 Price Each
C1AR29 1B12DS8 C1AR49 1B16DS10 C1AR70 1B20DS12 C1AR98 1B25DS16 C1JD28 1B32DS20
DS DKO (German DIN 3902) Female Swivel, Heavy Duty
Fluid Conveying
Catalog Part No.
Aeroquip Model
Tube Thread O.D. Hose D H (mm) (mm) Size (mm) (mm) Wt. M30 x 2 M36 x 2 20 25 -10 -12 59.9 77.2 26 2.00 32.5 1.09
Price Each
C1AR50 1B16DSA10 C1AR71 1B20DSA12
DSA DKO (German DIN 3902) Female Swivel, Heavy Duty, 45 Elbow
Catalog Part No. Aeroquip Model Thread (mm) M24 x 1.5 M30 x 2 M36 x 2 Tube O.D. Hose D H (mm) Size (mm) (mm) Wt. 16 20 25 -08 -10 -12 44 52.6 62.8 49 0.47 53.5 2.63 64.5 1.14 Price Each
C1AR30 1B12DSB8 C1AR51 1B16DSB10 C1AR72 1B20DSB12
DSB DKO (German DIN 3902) Female Swivel, Heavy Duty, 90 Elbow
783
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread M30 x 1.5 M33 x 1.5
Hose Size -12 -16
D (mm) Wt. 51.3 57 0.59 1.10
Price Each
C1AR46 1B12KF12 C1AR67 1B16KF16
KF Komatsu Female Swivel
Fluid Conveying
784
Hose Fittings
Steel Crimp Spiral Spiral TTC Fittings for use with hose: FC254, FC273, FC606 1E fittings for use on 4 wire. 1Z fittings for use on 6 wire.
Catalog Part No.
Aeroquip Model
Thread 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12
Hose Size -12 -12 -16 -20 -24 -32
D (in) 1.76 2.43 2.03 2.94 3.68 3.33
Wt. 0.85 0.01 0.30 2.68 3.70 6.51
Price Each
C1EM52 1EA12FJ12 C1GN21 1EA16FJ12 C1EM54 C1FE64 C1KJ46 C1FJ92 1EA16FJ16 1EA20FJ20 1EA24FJ24 1ZA32FJ32
Catalog Part No. C1KJ41
Aeroquip Model 1EA20FJA20
Thread 1-5/16-12 1-5/8-12
Hose Size -16 -20
D (in)
H (in)
Wt. 1.69 2.80
Price Each
C1JD29 1EA16FJA16
3.69 1.30 4.38 1.46

Catalog Part No. Hose Size -12 -16 -20 D (in) H (in) Price Each
Fluid Conveying
Aeroquip Model
Thread 1-1/16-12 1-5/16-12 1-5/8-12
Wt. 2.50 1.85 3.03
C1EM53 1EA12FJB12 C1EM55 1EA16FJB16 C1KJ42 1EA20FJB20
2.74 2.28 3.38 2.80 4.13 3.23

Catalog Part No. C1FL14 Hose Size -12 -12 -16 -16 -16 -20 -20 -20 -24 -32 D (in) 2.39 2.56 2.76 2.76 2.66 2.90 2.90 4.35 4.36 4.91 Price Each
Aeroquip Model Flange Head Dia. 1.62 1.88 1.88 1.88 2.12 2.12 2.12 2.50 2.50 3.13 1E16FH12
Wt. 0.88 1.06 1.82 2.50 1.87 2.50 2.56 3.28 3.00 6.47
C1EM35 1E12FH12
FH SAE Code 62 Split Flange
C1FM84 1Z16FH16 C1EM44 1E16FH16 C1FS97 1E20FH16 C1KJ32 1E20FH20 C1ZV38 1Z20FH20 C1FF54 1Z24FH20 C1KJ37 C1FJ85 1E24FH24 1Z32FH32
1E fittings for use on 4 wire construction. 1Z fittings for use on 6 wire construction.
785
Hose Fittings
Catalog Part No.
Aeroquip Model
Flange Head Dia. 1.62 1.88 1.88 2.12 2.12 2.12
Hose Size -12 -16 -16 -16 -20 -20
D (in)
H (in)
Wt. 0.99 2.05 1.90 2.36 2.90 3.03
Price Each
C1EM36 1E12FHA12 C1FM85 1Z16FHA16 C1EM45 1E16FHA16 C1EM50 1E20FHA16
3.16 1.06 3.81 1.26 3.81 1.26 4.43 1.54 4.66 1.54 4.66 1.54
FHA SAE Code 62 Split Flange 45 Elbow
C1KJ33
1E20FHA20
C1EM80 1Z20FHA20 Note: Flange O-Rings page 1098
Catalog Part No.
Aeroquip Model
Flange Head Dia. 1.62 1.88 1.88 1.88 2.12 2.12 2.12 2.12 2.50 2.50
Hose Size -12 -12 -16 -16 -16 -16 -20 -20 -20 -24
D (in)
H (in)
Wt. 1.12 2.00 2.25 2.00 2.76 2.88 3.32 2.00 4.20
Price Each
C1EM37 1E12FHB12 C1EM46 1E16FHB12 C1FM86 1Z16FHB16 C1EM47 1E16FHB16 C1EM51 1E20FHB16 C1EM81 1Z20FHB16 C1FL16 C1KJ38 C1KJ39 1E20FHB20 1E24FHB20 1E24FHB24 C1EM82 1Z20FHB20
2.95 2.32 3.40 2.80 3.61 2.80 3.61 2.80 4.23 3.50 4.23 3.50 4.46 3.50 4.46 3.50 4.96 4.09
Fluid Conveying
FHB SAE Code 62 Split Flange 90 Elbow
5.00 4.09 30.09
Note: Flange O-Rings page 1098 Catalog Part No. Hose Size -12 -12 -16 -16 -20 -20 -24 D (in) 2.61 2.74 2.95 2.81 2.95 4.42 4.46 Price Each
Aeroquip Model Flange Head Dia. 1.62 1.88 1.88 2.12 2.12 2.50 2.50
Wt. 0.96 1.02 1.80 2.00 2.10 3.30 3.95
C1EM32 1E12CT12 C1EM38 1E16CT12 C1EM39 C1KJ30 C1FJ79 C1FJ80 1E16CT16 1E20CT20 1Z24CT20 1Z24CT24
CT Caterpillar Split Flange
C1EM48 1E20CT16
Note: Caterpillar Flange O-Rings page 1098
CTD Caterpillar Flange 22-1/2 Elbow
Catalog Part No. C1FA37 C1FA48
Aeroquip Model 1E16CTD16 1Z20CTD20
Flange Head Dia. 1.88 2.12
Hose Size -16 -20
D (in)
H (in)
Wt. 2.01 3.11
Price Each
4.32 0.60 5.23 0.70
786
Hose Fittings
Catalog Part No.
Aeroquip Model
Hose Size -12 -16 -16
D (in)
H (in)
Wt. 1.08 1.99 2.85
Price Each
C1EM33 1E12CTA12 C1EM41 1E16CTA16 C1EM49 1E20CTB16
3.31 1.22 3.94 1.39 4.23 3.66
CTA Caterpillar Split Flange 45 Elbow

Catalog Part No. C1FA38 C1FA49 Aeroquip Model 1E16CTE16 1Z20CTE20 Flange Head Dia. 1.88 2.12 Hose Size -16 -20 D (in) H (in) Wt. 2.21 3.52 Price Each
4.62 2.20 5.71 2.68
CTE Caterpillar Flange 67-1/2 Elbow

Catalog Part No. C1EM43 C1KJ31 C1FJ84 Flange Head Dia. 1.62 1.88 2.12 2.50 Hose Size -12 -16 -20 -24 D (in) H (in) Price Each
Fluid Conveying
Aeroquip Model 1E16CTB16 1E20CTB20 1Z24CTB24
Wt. 1.18 2.20 3.47 4.96
C1EM34 1E12CTB12
2.95 2.54 3.61 2.98 4.46 3.66 5.00 4.16
CTB Caterpillar Split Flange 90 Elbow

Catalog Part No. Hose Size -12 -16 -16 -20 D (in) 2.15 2.22 2.38 2.62 Price Each
Aeroquip Model Flange Head Dia. 1.50 1.75 2.00 2.00
Wt. 0.81 1.54 1.70 2.27
C1GD30 1E12FL12 C1FH80 1E16FL16
C1FJ75 C1KJ34
1E20FL16 1E20FL20
787
Hose Fittings
Catalog Part No. C1FJ72 C1KJ35
Aeroquip Model 1E16FLA16 1E20FLA20
Hose Size -12 -16 -20
D (in)
H (in)
Wt. 0.95 1.86 2.90
Price Each
C1GG49 1E12FLA12
3.16 1.06 3.81 1.26 4.66 1.54

Catalog Part No. C1FJ73 C1FJ76 C1KJ36 Aeroquip Model 1E16FLB16 1E20FLB16 1E20FLB20 Flange Head Dia. 1.50 1.75 2.00 2.00 Hose Size -12 -16 -16 -20 D (in) H (in) Wt. 1.06 2.06 2.66 3.24 Price Each
C1EV60 1E12FLB12
2.95 2.32 3.61 2.80 4.23 3.50 4.46 3.50
Fluid Conveying
Catalog Part No. C1EX44
Aeroquip Model 1EA12FR12
Thread 1-3/16-12 1-7/16-12 1-7/16-12 1-7/16-12 1-11/16-12
Hose Size -12 -12 -16 -16 -20
D (in) 2.00 1.56 2.15 2.15 2.43
Wt. 0.97 0.98 1.91 1.79 2.70
Price Each
C1HW36 1EA16FR12
C1FM89 1ZA16FR16 C1ZU20 C1KJ43 1EA16FR16 1EA20FR20
Catalog Part No.
Aeroquip Model
Thread 1-3/16-12 1-7/16-12 1-11/16-12
Hose Size -12 -16 -20
D (in)
H (in)
Wt. 0.97 1.79 2.60
Price Each
C1GA94 1EA12FRA12 C1FQ67 1EA16FRA16 C1KJ44 1EA20FRA20
2.91 0.94 3.48 1.10 4.13 1.22
Catalog Part No. C1FJ77 C1KJ45
Aeroquip Model 1EA16FRB16 1EA20FRB20
Thread 1-3/16-12 1-7/16-12 1-11/16-12
Hose Size -12 -16 -20
D (in)
H (in)
Wt. 0.40 1.94 2.80
Price Each
C1ZZ13 1EA12FRB12
2.74 2.28 3.37 2.80 4.12 3.07
FRB Female ORS Swivel 90 Elbow
788
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread G1
Hose Size -16
D (in) 1.65
Wt. 1.49
Price Each
C1GG50 1E16BF16
BF Female BSPP (British Parallel)

Catalog Part No. Hose Size -12 D (in) H (in) Price Each
Aeroquip Model
Thread G 3/4
Wt. 0.98
C1HD26 1E12BFB12
2.74 2.24
BFB Female BSPP (British Parallel) 90 Elbow
Fluid Conveying
Catalog Part No. Aeroquip Model C1GL14 1E25DS16 C1GD31 1Z25DS16 C1GL15 1E32DS16 DS DKO (German) Female Swivel, Heavy Duty C1KJ40 1E32DS20
Thread (mm) M42 x 2 M42 x 2 M52 x 2 M52 x 2
Tube O.D. (mm) 30 30 38 38
Hose Size -16 -16 -16 -20
D (mm) 56.8 56.8 57.3 63.3
Wt. 1.92 2.05
Price Each
2.90
789
Hose Fittings
Steel Crimp 1 & 2 Wire Braid Field Crimp Fittings for use with hose: 2661(-12, -16), FC619 (-12, -16), GH663, GH793 (-4 thru -8, -12 thru -20)
Catalog Part No.
Aeroquip Model
Thread 3/8-18 3/4-14
Hose Size -04 -12
D (in) 1.01 1.35
Wt. 0.13 0.48
Price Each
C1CW14 FJ9121-0604S C1CW20 FJ9121-1212S
FJ9121 Male Pipe
Catalog Part No.
Aeroquip Model
Thread 7/16-12 9/16-18 9/16-18 1-1/16-12 1-5/16-12
Hose Size -04 -04 -06 -12 -16
D (in) 1.06 1.18 1.32 1.54 1.74
Wt. 0.12 0.13 0.18 0.52 0.80
Price Each
C1CW23 FJ9122-0404S C1CW26 FJ9122-0604S
FJ9122 Female JIC 37 Swivel
C1CW27 FJ9122-0606S C1CW34 FJ9122-1212S C1CW35 FJ9122-1616S
Fluid Conveying
Catalog Part No.
Aeroquip Model
Thread 3/4-16
Hose Size -06
D (in)
H (in)
Wt. 0.26
Price Each
C1CW50 FJ9132-0806S
1.33 1.09
FJ9130 / FJ9132 Female Swivel 90 Elbow
790
Hose Fittings
Steel Crimp Global Skive Nipples for use with hose: Clamp: 2661/FC619 (-12 to -20) Crimped 1SA Socket: FC639 (-04 to -08), GH663. Crimped 1SB Socket: FC195, FC579, FC639 (-10 to -16), FC735 (-04 to -20), , GH195, GH781 (-4 to -20), GH793
Catalog Part No. C1EM74 C1AT21 Aeroquip Model 1SA6FJ5 1SA16FJ16 1SA20FJ20 Thread 1/2-20 1-5/16-12 1-5/8-12 Hose Size -05 -16 -20 D (in) 1.14 1.93 1.88 Wt. 0.15 0.53 0.76 Price Each
C1AT25
Catalog Part No. C1AT22
Aeroquip Model 1SA16FJB16
Thread 1-5/16-12
Hose Size -16
D (in) 2.2
H (in) 2.39
Wt. 0.80
Price Each

Catalog Part No. C1AT31 Aeroquip Model 1SA8 Hose Size -08 Wt. 0.10 Price Each
Fluid Conveying
1SA Global Skive Sockets for use with hose: FC310, GH663
Catalog Part No. C1AT37 C1AT38 Price Each
Aeroquip Model 1SB4 1SB6 1SB8 1SB10 1SB12
Hose Size -04 -06 -08 -10 -12
Wt. 0.04 0.07 0.09 0.12 0.14
1SB Global Skive Sockets for use with hose: 2781, FC195, GH195, GH781, GH793
C1AT39 C1AT33 C1AT34
791
Hose Fittings
Steel Crimp Global OTC Fittings for use with hose: 2661, FC619
Catalog Part No. C1HN50
Aeroquip Model 1GA16FJ16
Thread 1-5/16-12
Hose Size -16
D (in) 1.93
Wt. 0.65
Price Each
Fluid Conveying
792
Hose Fittings
Steel Crimp Polyon Swage Polyon Swage Fittings for use with hose: FC372, FC373, FC374, FC375, FC902, FC914
Die Used Pusher FT Catalog Used Hose D Part No. Aeroquip Model 1243 FT1243 Thread Size (in) C1CS52 FC5805-0203S C1CS55 FC5805-0604S -100-3 -150-1 -100-4 -150-5 1/8-27 3/8-18 -03 -04 1.08 1.36
Wt. 0.08 0.14
Price Each
FC5805 Male Pipe

Catalog Part No. Aeroquip Model Die Pusher Used Used Hose D FT 1243 FT1243 Thread Size (in) Wt. -100-5 -250-12 9/16-18 -05 1.26 0.19 1.54 0.48 -100-12 -250-7 1-1/16-12 -12 Price Each
C1CS67 FC5810-0605S C1CS72 FC5810-1212S
FC5810 Female JIC 37 Swivel

Catalog Part No. Aeroquip Model
Die Pusher Used Used FT1243 FT1243 -100-4 -100-6
Thread G 1/4 G 3/8
Hose D Price Size (in) Wt. Each -04 1.15 0.14 -06 1.29 0.22
C1FQ30 FJ3383-0404S C1FQ31 FJ3383-0606S
Fluid Conveying
FJ3383 JIS (Japanese JIS 30 Female Seat) Female Swivel
793
Hose Fittings
Steel Crimp Synflex 3903 Swage Synflex 3903/7903 Swage Fittings for use with hose: 25CT (-08), 30CT (-04 to -08), 3130, 3440 (-04 to -08), 37AL, 3800
Catalog Part No.
Synflex Model
Thread 1/8-27 3/8-18 1/4-18 3/8-18 1/2-14 3/8-18
Hose Size -03 -04 -06 -06 -06 -08
B Pusher (in) Used 4599 Wt. 1.06 1.31 1.31 1.31 1.56 1.28 -MP001 -MP005 -MP005 -MP005 -MP009 -MP008 0.08 0.14 0.16 0.16 0.22 0.23
Price Each
C1HX53 3903-03102 C1HX56 3903-04106 C1HX61 3903-06104 C1HW67 3903-06106 C1HX62 3903-06108 C1HZ73 3903-08106
3903 Code 100 Male Pipe
Catalog Part No. Synflex Model C1JD43 3903-02142 C1HX63 3903-06146
Thread 1/8-27 3/8-18
Hose Size -02 -06
B Pusher (in) Used 4599 Wt. 1.31 1.69 -MP027 -MP006 0.06 0.22
Price Each
3903 Code 140 Male Pipe Swivel

Catalog Part No. Synflex Model Thread 1/2-20 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 Hose Size -03 -04 -04 -05 -06 -08 B Pusher (in) Used 4599 Wt. 1.38 1.44 1.44 1.38 1.38 1.63 -FP001 -FP012 -FP013 -FP013 -FP005 -FP006 0.12 0.14 0.15 0.15 0.21 0.31 Price Each
C1HZ58 3903-03545
Fluid Conveying
C1HW65 3903-04544
3903 Code 540 Female JIC 37 Swivel
C1HX57 3903-04545 C1HX60 3903-05546 C1HX66 3903-06548 C1HW73 3903-08550
Catalog Part No.
Synflex Model
Thread 7/16-20 9/16-18 9/16-18 3/4-16
Hose Size -03 -04 -05 -08
B Pusher (in) Used 4599 Wt. 1.25 1.32 1.31 1.44 -MP001 -MP005 -MP004 -MP008 0.08 0.13 0.13 0.23
Price Each
C1HZ57 3903-03504 C1HZ63 3903-04506 C1HZ68 3903-05506
3903 Code 500 Male JIC 37
C1HW71 3903-08508
Catalog Part No. Synflex Model C1JC46 3903-05606
Thread 9/16-18 9/16-18
Hose B F Size (in) (in) -05 -06
Pusher Used 4599
Wt. 0.18 0.19
Price Each
1.94 0.39 -TP206 1.94 0.39 -TP206
3903 Code 600 Female JIC 37 Swivel 45 Elbow
C1HX67 3903-06606
794
Hose Fittings
Catalog Part No. Synflex Model C1HX55 3903-03644 C1HX58 3903-04644 C1HZ64 3903-04646 C1HZ72 3903-06648
Thread 7/16-20 7/16-20 9/16-18 3/4-16
Hose B F Size (in) (in) -03 -04 -04 -06
Pusher Used 4599
Wt. 0.11 0.14 0.17 0.26
Price Each
1.69 0.68 -TP204 1.69 0.68 -TP204 1.94 1.13 -TP206 2.00 1.09 -TP208
3903 Code 640 Female JIC 37 Swivel 90 Elbow

Catalog Part No. Synflex Model C1HZ60 3903-04404 C1HZ66 3903-05406 Hose Size -04 -05 -06 -08 B Pusher (in) Used 4599 Wt. 1.50 1.56 1.88 1.56 -MP045 -MP037 -MP046 -FP040 0.15 0.19 0.26 0.37 Price Each
Thread 9/16-18 11/16-16 13/16-16 13/16-16
3903 Code 400 Female O-Ring Face Seal Swivel
C1HZ70 3903-06408 C1HZ75 3903-08408
Fluid Conveying
Catalog Part No. Synflex Model C1HZ61 3903-04474 C1HZ67 3903-05476
Thread 9/16-18 11/16-16
Hose B F Size (in) (in) -04 -05
Pusher Used TP
Wt. 0.16 0.19
Price Each
1.25 0.78 -TP204 1.94 0.90 -TP206
3903 Code 470 Female O-Ring Face Seal Swivel 90 Elbow

Catalog Part No. Synflex Model C1JA23 7903-04B04 C1JA26 7903-06B06 Hose Size -04 -06 D Pusher (mm) Used 4599 Wt. 32.8 35.8 -FP002 -FP503 0.15 0.19 Price Each
Thread 1/4-19 3/8-19
7903 Code B Female BSP (British) Swivel with O-Ring
795
Hose Fittings
Catalog Part No. Synflex Model C1JA25 7903-04V04 C1JA28 7903-06V06
Thread 1/4-19 3/8-19
Hose Size -04 -06
B Pusher (in) Used 4599 Wt. 1.38 1.56 -FP414 -FP416 0.17 0.23
Price Each
Fluid Conveying
7903 Code V00 Female JIS (Japanese) Female Swivel 60 Female Cone
796
Hose Fittings
Steel Crimp Synflex 390H Swage Synflex 390H/790H Swage Fittings for use with hose: 3440 (-12 to -16), 3R80
Catalog Part No.
Synflex Model
Thread 7/16-20 3/4-16
Hose Size -04 -08
B Pusher (in) Used 4599 Wt. 1.44 1.63 -FP012 -FP016 0.16 0.30
Price Each
C1HW77 390H-04544 C1HW84 390H-08548
390H Code 540 Female JIC 37 Swivel Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
797
Hose Fittings
Steel Crimp Flat Crimp Flat Crimp Fittings for use with hose: 2807, FC807, STW
Catalog Part No.
Aeroquip Model
Thread 1/8-27 1/2-14
Hose Size -04 -08
D (in) 0.66 1.16
Wt. 0.02 0.10
Price Each
C1CR89 FC3680-0204S C1HX77 FC3680-0808S
FC3680 Male Pipe
Note: FC3680 is nipple only. Required socket is listed at end of this section. Catalog Part No. Hose Size -04 -05 -06 -08 -10 -12 -16 D (in) 0.96 1.01 1.11 1.21 1.32 1.41 1.64 Price Each
Aeroquip Model
Thread 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
Wt. 0.03 0.05 0.05 0.10 0.15 0.23 0.35
C1CT37 FC8779-0404S C1CT38 FC8779-0505S C1CT39 FC8779-0606S C1CT41 FC8779-0808S C1CT42 FC8779-1010S C1ZT30 FC8779-1212S C1ZT29 FC8779-1616S
Note: FC8779 is nipple only. Required socket is listed at end of this section. Catalog Part No. Hose Size -04 D (in) H (in) Price Each
Aeroquip Model
Thread 7/16-20
Wt. 0.04
Fluid Conveying
C1GD94 FC4098-0404S
0.69 0.68
Note: FC4098 and FC6217 are nipples only. Required socket is listed at end of this section.
FC5098 / FC7217 Female Swivel 90 Elbow

Catalog Part No. Hose Size -04 -05 -06 -08 -10 -12 -16 Fits Aeroquip Hose Model 2807-4, FC807-04 2807-5, FC807-05 2807-6, FC807-06 2807-8, FC807-08 2807-10, FC807-10 2807-12, FC807-12 2807-16, FC807-16 Price Each
Aeroquip Model
Wt. 0.01 0.03 0.01 0.10 0.05 0.05 0.05
C1CR84 FC3596-04S
FC3443 / FC3596 Flat Crimp Sockets for use with hose: 2807, FC807
C1CR72 FC3443-04S C1CR74 FC3443-05S C1CR86 FC3596-08S C1CR75 FC3443-08S C1CR87 FC3596-12S C1CR88 FC3596-16S
Note: Images show crimp sockets, which are ordered separately (See last group in this section for the required Flat Crimp Sockets).
798
Hose Fittings
Steel Crimp Flat Crimp Flat Crimp Fittings for use with hose: FC363
Catalog Part No. C1HE54 C1HE55
Aeroquip Model FC1349-1212S FC1349-2020S
Thread 3/4-14 1-1/4-11-1/2
Hose Size -12 -20
D (in) 1.37 1.70
Wt. 0.28 0.73
Price Each
FC1349 Male Pipe
Note: FC1349 is nipple only. Required socket is listed at end of this section.
Catalog Part No. C1HE52 C1HE53
Aeroquip Model FC1347-12S FC1347-20S
Hose Size -12 -20
Wt. 0.05 0.08
Price Each
FC1347 Flat Crimp Sockets for use with hose: FC363, FC364, FC563
799
Hose Fittings
Steel Reusable 1 Wire Braid 1 Wire Braid Reduced Bore Fittings (SAE100R5 Style) for use with hose: 2651, FC234, FC300, FC321, FC350, FC355, FC558, FC802
Catalog Part No.
Mandrel Aeroquip Model Required Yes No No No No No No No
Thread 1/8-27 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2
Hose Size -05 -16 -16 -20 -20 -24 -24 -32
D (in) 1.0 1.53 1.72 1.84 1.87 2.12 2.03 2.20
Wt. 0.07 0.60 0.58 0.88 0.97 1.10 1.31 1.75
Price Each
C1BP35 412-2-5S C1BP32 412-12-16S C1BP33 412-16-16S 412-16-20S 412-20-24S
412 / 44-412 Male Pipe (Mandrel required on most sizes)
C1BP34 C1BP37
C1BP36 412-20-20S C1BP38 412-24-24S C1BP39 412-32-32S
Mandrels: Assembly Mandrels page 752 Catalog Part No. C1BQ44 C1BQ45 Hose Size -04 -04 -05 -06 -06 -08 -08 -10 -12 D (in) 0.93 1.12 1.18 1.23 1.23 1.33 1.58 1.59 1.67 Price Each
Aeroquip Model 4412-2-4S 4412-4-4S
Thread 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14
Wt. 0.06 0.08 0.09 2.12 0.14 0.21 0.26 0.33 0.45
C1BQ46 4412-4-5S
Fluid Conveying
4412 Male Pipe (No mandrel required)
C1BQ47 4412-4-6S C1BQ48 C1BQ49 C1BQ52 4412-6-6S 4412-6-8S 4412-8-8S
C1BQ50 4412-8-10S C1BQ43 4412-12-12S
Catalog Part No. C1BP23
Mandrel Aeroquip Model Required 411-4S Yes Yes Yes Yes Yes Yes Yes Yes
Thread 7/16-20 9/16-18 3/4-16 7/8-14 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12
Hose Size -04 -06 -08 -10 -16 -20 -24 -32
D (in) 1.0 1.15 1.38 1.51 1.55 1.64 2.03
Wt. 0.07 0.12 0.23 0.33 0.62 1.18 2.34
Price Each
C1BP27 411-6S C1BP29 411-8S C1BP12 411-10S C1BP15 411-16S C1BP17 411-20S C1BP19 411-24S C1BP21 411-32S
411 / 44-411 Female JIC 37 Swivel (Three piece fitting, larger bore) (Mandrel required all sizes)
1.83 10.00
Mandrels: Assembly Mandrels page 752
800
Hose Fittings
Catalog Part No. C1BQ36 C1BQ35 C1BQ37
Aeroquip Model 4411-4S 4411-4-5S 4411-5S 4411-6S 4411-8-6S 4411-8S 4411-10-8S 4411-10S
Thread 7/16-20 7/16-20 1/2-20 9/16-18 3/4-16 9/16-18 3/4-16 7/8-14 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12
Hose Size -04 -05 -05 -06 -06 -08 -08 -08 -10 -10 -10 -12 -12 -16 -20 -24 -32
D (in) 1.23 1.30 1.35 1.43 1.52 1.53 1.62 1.80 1.64 1.81 1.91 1.83 1.92 1.93 2.07 2.22 2.55
Wt. 0.09 0.09 0.11 0.16 0.20 0.22 0.26 0.31 0.34 0.39 0.49 0.45 0.57 0.72 1.34 1.60 2.67
Price Each
4411 Female JIC 37 Swivel (Two piece fitting, no mandrel required)
C1BQ39 C1BQ41 C1BQ42 C1BQ27 C1BQ28
C1BQ38 4411-6-8S
C1BQ40 4411-8-10S C1BQ29 4411-12-10S C1BQ26 4411-10-12S C1BQ30 C1BQ31 4411-12S 4411-16S
C1BQ32 4411-20S C1BQ33 4411-24S C1BQ34 4411-32S
Fluid Conveying
Catalog Part No.
Mandrel Aeroquip Model Required Yes Yes Yes Yes
Thread 5/8-18 3/4-16 1-1/16-14 1-5/16-14
Hose Size -06 -08 -12 -16
D (in) 1.15 1.38 1.45 1.33
Wt. 0.12 0.22 0.42 0.59
Price Each
C1BN73 401-6S C1BN75 401-8S C1BN69 401-12S
401 Female SAE 45 Swivel (Three piece fitting, larger bore) (Mandrel required all sizes)
C1BN91 406-16S
Catalog Part No.
Aeroquip Model
Thread 7/16-20 1/2-20 5/8-18 3/4-16 7/8-14 1-1/16-14
Hose Size -04 -05 -06 -08 -10 -12
D (in) 1.22 1.34 1.46 1.62 1.81 1.92
Wt. 0.08 0.10 0.17 0.27 0.38 0.56
Price Each
C1BQ20 4401-4S C1BQ21 4401-5S C1BQ22 4401-6S 4401-8S 4401-10S
4401 Female SAE 45 Swivel (Two piece fitting, no mandrel required)
C1BQ23 C1BQ18
C1BQ19 4401-12S
801
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-5/16-12
Hose Size -04 -05 -06 -08 -10 -16
D (in) 1.10 1.17 1.22 1.42 1.72 1.69
Wt. 0.07 0.09 0.13 0.24 0.36 0.65
Price Each
C1BQ53 4414-4S C1BQ54 4414-5S C1BQ55 4414-6S C1BQ56 4414-8S C1EN39 4414-10S C1KG79 4414-16S
4414 Male JIC 37 Flare
Catalog Part No.
Aeroquip Model
Thread 5/8-18 3/4-16
Hose Size -06 -08
D (in) 1.28 1.52
Wt. 0.14 0.25
Price Each
C1BQ24 4402-6S C1BQ25 4402-8S
4402 Male SAE 45 Flare

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.313 0.38 0.50 Hose Size -04 -05 -06 -08 B (in) D (in) Wt. 0.05 0.07 0.02 0.20 Price Each
Fluid Conveying
C1AL75 190000-4S C1AL76 190000-5S C1AL78 190000-6S C1AL79 190000-8S
0.25 0.62 0.31 0.75 0.38 0.73 0.50 0.89
190000 Lifesaver
Catalog Part No.
Aeroquip Model
Thread 7/16-20 1/2-20 5/8-18 9/16-18 3/4-16 7/8-14 1-1/16-14 1-1/16-12 1-5/16-12 1-5/8-12
Hose Size -04 -05 -06 -06 -08 -10 -12 -12 -16 -20
D (in)
H (in)
Wt. 0.09 0.12 0.17 0.15 0.29 0.40 0.62 0.63 0.85 1.46
Price Each
C1AM22 190297-4S C1AM23 190297-5S C1AM26 190299-6S C1AM11 190265-6S
1.10 0.33 1.29 0.36 1.22 0.39 1.33 0.39 1.84 0.55 1.95 0.64 2.21 0.78 2.21 0.78 2.47 1.07 2.85 1.22
190297 / 190265 / 190299 Female 45 Swivel Elbow
C1AM24 190297-8S C1AM21 190297-10S C1AM25 190299-12S C1AL97 190265-12S C1AL98 190265-16S C1AL99 190265-20S
802
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 7/16-20 1/2-20 5/8-18 9/16-18 3/4-16 7/8-14 1-1/16-14 1-1/16-12 1-5/16-12 1-5/8-12
Hose Size -04 -05 -06 -06 -08 -10 -12 -12 -16 -20
D (in)
H (in)
Wt. 0.20 0.12 0.18 0.20 0.30 0.41 0.70 0.75 0.92 1.65
Price Each
C1AM18 190296-4S C1AM19 190296-5S C1AM29 C1AL95 C1AM20 190302-6S 190261-6S 190296-8S
0.99 0.68 1.18 0.77 1.23 0.85 1.23 0.85 1.61 1.09 1.65 1.23 2.17 1.82 2.17 1.82 2.28 2.39 2.65 2.75
C1AM17 190296-10S
190296 / 190261 / 190302 Female 90 Swivel Elbow
C1AM28 190302-12S C1AL92 190261-12S C1AL93 190261-16S C1AL94 190261-20S
Catalog Part No.
Aeroquip Model
Thread 7/16-20 1/2-20 5/8-18 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
Hose Size -04 -05 -06 -06 -08 -10 -12 -16
D (in)
H (in)
Wt. 0.09 0.14 0.20 0.20 0.33 0.46 0.74 1.12
Price Each
C1AM14 190295-4S C1AM15 190295-5S C1AM27 190301-6S C1AL91 190260-6S C1AM16 190295-8S C1AM13 190295-10S
0.99 1.80 1.18 1.77 1.23 2.18 1.23 2.18 1.73 2.43 1.90 2.57 2.17 3.73 2.28 4.58
Fluid Conveying
190295 / 190260 / 190301 Female 90 Swivel Elbow, Long
C1GD23 190260-12S C1BS83 190260-16S
Catalog Part No. C1HL12
Aeroquip Model Flange Head Dia. 4775-24S 2.38
Hose Size -24
D (in) 2.56
Wt. 1.34
Price Each
4775 Code 61 Split Flange

Catalog Part No. C1AL80 Aeroquip Model 190111-4S Thread 7/16-24 1/2-20 1/2-20 5/8-18 3/4-18 Hose Size -04 -05 -06 -06 -08 D (in) 1.71 1.84 1.82 1.82 2.05 Wt. 0.20 0.20 0.30 0.14 0.25 Price Each
C1AL82 190111-5S C1AL81 190111-5-6S
190111 SAE Male Inverted Flare
C1AL83 C1AL84
190111-6S 190111-8S
803
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 7/16-20 1/2-20 1/2-20 5/8-18 3/4-18
Hose Size -04 -05 -06 -06 -08
D (in)
H (in)
Wt. 0.07 0.10 0.20 0.15 0.25
Price Each
C1EM25 190371-4S C1AM36 190371-5S C1AM35 190371-5-6S C1AM37 190371-6S C1AM38 190371-8S
1.99 0.96 2.12 0.96 2.10 0.96 2.10 0.96 2.24 0.93
190371 SAE Male Inverted Flare 45 Elbow
Catalog Part No.
Aeroquip Model
Thread 7/16-24 1/2-20 1/2-20 5/8-18 11/16-18 3/4-18
Hose Size -04 -05 -06 -06 -06 -08
D (in)
H (in)
Wt. 0.08 0.10 0.14 0.25 0.17 0.25
Price Each
C1AL85 190235-4S C1AL86 190235-5S C1EM24 190235-5-6S C1AL87 190235-6S C1AL88 190235-7-6S C1AL90 190235-8S
1.62 1.69 1.75 1.69 1.73 1.69 1.73 1.73 1.73 1.73 1.89 1.75
Fluid Conveying
190235 SAE Male Inverted Flare Short 90 Elbow

Catalog Part No. Hose Size -06 -08 -12 -16 D (in) 1.53 1.98 2.11 2.23 Price Each
Aeroquip Model
Thread 11/16-16 13/16-16 1-3/16-12 1-7/16-12
Wt. 0.22 0.37 0.77 1.08
C1CW56 FJ9706-0606S
C1ZV63 FJ9706-0808S C1ZV62 FJ9706-1212S
FJ9706 Female ORS Swivel
C1EU62 FJ9706-1616S
Catalog Part No.
Aeroquip Model
Thread 11/16-16 13/16-16
Hose Size -06 -08
D (in)
H (in)
Wt. 0.17 0.28
Price Each
C1FZ61 FJ9707-0606S C1FZ62 FJ9707-0808S
1.37 0.43 1.88 0.59
FJ9707 Female ORS Swivel 45 Elbow
804
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 11/16-16 13/16-16
Hose Size -06 -08
D (in)
H (in)
Wt. 0.17 0.29
Price Each
C1EU65 FJ9708-0606S C1EU66 FJ9708-0808S
1.23 0.90 1.61 1.15
FJ9708 Female ORS Swivel 90 Elbow

Catalog Part No. Aeroquip Model Thread 3/8-19 1/2-14 Hose Size -06 -08 D (in) 1.44 1.59 Wt. 0.23 0.39 Price Each
C1FF42 07.421-6-6 C1EZ93 07.421-8-8
07.421 BSP (British) Female Swivel
Fluid Conveying
Catalog Part No.
Aeroquip Model
Pilot Pilot Hose D H O.D. Length Thread Size (in) (in) 0.34 0.18 5/8-18 -06 1.57 1.76
Wt. 0.16
Price Each
C1CT25 FC7662-0606S
Note: Bump Tube O-Ring Seal O-Rings page 1098
FC7662 / FC7474 Male Bump Tube O-Ring Seal
805
Hose Fittings
Steel Reusable 1 Wire Braid 1 Wire Braid Thru-The-Cover Full Bore Fittings for use with hose: GH663
Catalog Part No. C1CT27
Aeroquip Model FC7988-0404S
Thread 7/16-20 9/16-18 3/4-16 3/4-16 1-1/16-12 1-5/16-12
Hose Size -04 -06 -06 -08 -12 -16
D (in) 1.46 1.78 1.90 1.70 2.2 2.21
Wt. 0.16 0.27 0.12 0.35 0.74 1.25
Price Each
C1CT28 FC7988-0606S C1ZX92 FC7988-0806S
C1CT29 FC7988-0808S C1CT30 FC7988-1212S C1EC62 FC7988-1616S
Fluid Conveying
806
Hose Fittings
Steel Reusable 2 Wire Braid 2 Wire Braid Skive Fittings for use with hose: FC195
Catalog Part No. C1BQ79
Aeroquip Model 4721-6-6S
Thread 7/16-20 9/16-18 3/4-16 1-5/16-12
Hose Size -04 -06 -08 -16
D (in) 1.41 1.51 1.68 2.43
Wt. 0.20 0.31 0.44 1.46
Price Each
C1BQ77 4721-4-4S C1BQ81 4721-8-8S
4721 Female JIC 37 Swivel
C1BQ75 4721-16S
807
Hose Fittings
Steel Reusable 2 Wire Braid 2 Wire Braid Thru-The-Cover Fittings for use with hose: GH793
Catalog Part No.
Aeroquip Model
Thread 1/2-14 3/4-14
Hose Size -08 -12
D (in) 1.58 1.74
Wt. 7.00 0.81
Price Each
C1CS85 FC5985-0808S C1CS86 FC5985-1212S
FC5985 Male Pipe

Catalog Part No. C1CS89 C1CS91 Aeroquip Model FC5988-0606S FC5988-0808S Thread 7/16-20 9/16-18 3/4-16 1-1/16-12 1-5/16-12 Hose Size -04 -06 -08 -12 -16 D (in) 1.47 1.64 1.68 1.99 2.43 Wt. 0.19 0.31 0.44 0.94 1.40 Price Each
C1CS88 FC5988-0404S
C1CS92 FC5988-1212S C1CS93 FC5988-1616S
Catalog Part No.
Aeroquip Model
Thread 9/16-18 3/4-16
Hose Size -06 -08
D (in) 1.41 1.48
Wt. 0.28 0.40
Price Each
Fluid Conveying
C1FV89 FC5986-0606S C1HK22 FC5986-0808S
FC5986 Male JIC 37 Flare
808
Hose Fittings
Steel Reusable Polyon Polyon Fittings for use with hose: FC372, FC373, FC901, FC902
Catalog Part No.
Aeroquip Model
Thread 7/16-20 9/16-18 3/4-16
Hose Size -04 -06 -08
D (in) 1.35 1.36 1.59
Wt. 0.15 0.11 0.05
Price Each
C1CV89 FJ5100-0404S C1CV90 FJ5100-0606S C1CV91 FJ5100-0808S
809
Hose Fittings
Steel Reusable SOCKETLESS SOCKETLESS Fittings for use with hose: 2556, FC332, FC647, Easy Couple
Catalog Part No.
Aeroquip Model
Thread 1/2-14
Hose Size -08
D (in) 1.69
Wt. 0.19
Price Each
C1CV99 FJ9068-0808S
Note: Uses neoprene o-ring. Use only with petroleum and water glycol fluids.
FJ9068 / FJ9486 Male Pipe Swivel
Catalog Part No.
Aeroquip Model
Thread 3/8-18
Hose Size -06
D (in) 0.89
Wt. 0.25
Price Each
C1CS79 FC5853-0606S
FC5853 Female NPSM Swivel

Catalog Part No. Aeroquip Model Thread 7/16-20 9/16-18 3/4-16 Hose Size -04 -06 -08 D (in) H (in) Wt. 0.05 0.10 0.15 Price Each
C1CS76 FC5849-0404S C1CS75 FC5847-0606S C1CS77 FC5849-0808S
0.81 0.33 0.93 0.39 1.28 0.55
Fluid Conveying
FC5849 / FC5847 / FC5848 Female Swivel 45 Elbow

Catalog Part No. C1AM39 C1AM33 Aeroquip Model 190516-6S 190328-6S Thread 7/16-20 9/16-18 5/8-18 3/4-16 Hose Size -04 -06 -06 -08 D (in) H (in) Wt. 0.05 0.09 0.09 0.15 Price Each
C1AM64 191321-4S
0.70 0.68 0.83 0.85 0.83 0.85 1.05 1.09
C1AM65 191321-8S
191321 / 190516 / 190328 Female 90 Swivel Elbow, Short

Catalog Part No. Aeroquip Model Thread 5/8-18 Hose Size -06 D (in) H (in) Wt. 0.08 Price Each
C1AM32 190327-6S
1.33 1.73
190327 SAE Male Inverted Flare 90 Short Elbow
810
Hose Fittings
Steel Reusable SOCKETLESS SOCKETLESS Fittings for use with hose: 2556, FC332, FC647, Easy Couple
Catalog Part No.
Aeroquip Model
Thread 11/16-16
Hose Size -06
D (in) 0.39
Wt. 0.09
Price Each
C1EW79 FJ7044-0606S
FJ7044 ORS Female Swivel
811
Hose Fittings
Steel Reusable Air Brake Air Brake Fittings for use with hose: 2570
Catalog Part No. C1BR38
Thread 1/4-18 3/8-18
Hose Size -06 -06
D (in) 1.14 1.14
Wt. 0.25 0.20
Price Each
C1BR37 479301-4-6S
479301 Male Pipe

Catalog Part No. C1BR39 Aeroquip Model 479501-8-6S Thread 3/4-20 Hose Size -06 D (in) 1.30 Wt. 0.40 Price Each
479501 Female USF Swivel

Catalog Part No. Aeroquip Model Thread P 1/4-18 3/8-18 Thread T 3/4-20 USF 3/4-20 USF Wt. 0.25 0.06 Price Each
C1AY13 2038-4-8S
Fluid Conveying
2038 USF Swivel / Male Pipe Adapter
C1AY14 2038-6-8S
812
Hose Fittings
Steel Reusable Teflon Teflon 1 Braid Fittings for use with hose: 2807, FC807, STW
Catalog Part No.
Aeroquip Model
Thread 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2
Hose Size -04 -04 -05 -06 -08 -10 -12 -16
D (in) 0.89 1.08 1.07 1.13 1.16 1.46 1.61 1.86
Wt. 0.25 0.25 0.10 0.20 0.18 0.46 0.35 0.50
Price Each
C1BM62 38-190627-2-4 C1BM63 38-190627-4-4 C1BM64 38-190627-4-5
38-190627 Male Pipe
C1BM65 38-190627-4-6 C1HD82 38-190627-6-8 C1BM67 38-190627-8-10 C1BM60 38-190627-12-12 C1BM61 38-190627-16-16
Catalog Part No.
Aeroquip Model
Thread 3/8-24 7/16-20 1/2-20 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12
Hose Size -03 -04 -05 -08 -10 -12 -16 -20
D (in) 1.04 1.13 1.17 1.35 1.54 1.67 1.91 2.27
Wt. 0.05 0.07 0.08 0.19 0.26 0.38 0.56 1.17
Price Each
C1AM41 190600-3S C1BW76 63-190600-4 C1BW77 63-190600-5
63-190600 Female JIC 37 Swivel
C1BW79 63-190600-8 C1BW72 63-190600-10 C1BW73 63-190600-12 C1BW74 63-190600-16 C1BW75 63-190600-20
Fluid Conveying
Catalog Part No.
Aeroquip Model
Thread 5/8-18 1-1/16-14
Hose Size -06 -12
D (in) 1.25 1.67
Wt. 0.11 0.20
Price Each
C1BW83 63-190990-6 C1BW81 63-190990-12
190990 Female SAE 45 Swivel

Catalog Part No. Hose Size -03 -04 -06 -06 -12 D (in) H (in) Price Each
Aeroquip Model
Thread 3/8-24 7/16-20 5/8-18 9/16-18 1-1/16-12
Wt. 0.45 0.09 0.13 0.15 0.51
C1AM53 190773-3S C1AM54 190773-4S C1EQ29 FC9341-0606S C1AM55 190773-6S
1.17 0.46 1.05 0.33 1.20 .39 1.20 0.39 2.21 0.78
190773 / FC9341 Female 45 Swivel Elbow
C1EV56 190773-12S
813
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 7/16-20 5/8-18 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
Hose Size -04 -06 -06 -08 -10 -12 -16
D (in) 1.10
H (in) .85
Wt. 0.07 0.14 0.14 0.25 0.35 0.56 0.90
Price Each
C1AM50 190772-4S C1EQ28 FC9171-0606S C1AM51 C1AM52 190772-6S 190772-8S
0.95 0.68 1.10 0.85 1.41 1.09 1.49 1.23 2.17 1.82 2.49 2.39
C1AM48 190772-10S
190772 / FC9171 Female Swivel 90 Elbow
C1ZU24 190772-12S C1DV40 190772-16S
Catalog Part No.
Aeroquip Model
Tube O.D. (in) 0.63 0.75
Hose Size -10 -12
D (in) 1.18 1.41
Wt. 0.33 0.50
Price Each
C1BM68 38-191074-10 C1KK18 38-191074-12
191074 Compression Ball Sleeve
Fluid Conveying
Catalog Part No. C1AM46
Aeroquip Model 190718-10S
Thread 11/16-20 1-3/16-18 1-18
Hose Size -08 -10 -12
D (in) 1.44 1.49 1.76
Wt. 0.20 0.20 0.35
Price Each
C1AM47 190718-8S C1DV39 190718-12S
190718 SAE Ball Sleeve

Catalog Part No. Aeroquip Model Bolt Size (mm) 10 MM Hose Size -03 D (mm) Wt. 0.05 Price Each
C1EB89 FBM3091
Note: 2 bonded seals are required to seal a single banjo fitting. 3 are required for double banjo fittings. Metric Bonded Seals page 1094
10 mm Banjo
Catalog Part No.
Aeroquip Model
Bolt Size (mm) 10 MM
Hose Size -03
D (mm)
Wt. 0.05
Price Each
C1EB90 FBM3092
Note: 2 bonded seals are required to seal a single banjo fitting. 3 are required for double banjo fittings. Metric Bonded Seals page 1094
10 mm Banjo 17 Elbow
814
Hose Fittings
Catalog Part No.
Aeroquip Model
Thread 7/16-24 5/8-18 3/4-18
Hose Size -04 -06 -08
D (in) 1.66 1.69 1.84
Wt. 0.07 0.11 0.20
Price Each
C1CT47 FC9062-0404S C1CT48 FC9062-0606S C1CT49 FC9062-0808S
FC9062 SAE Male Inverted Flare
Catalog Part No.
Aeroquip Model
Thread 5/8-18
Hose Size -06
D (in)
H (in)
Wt. 0.13
Price Each
C1AM57 190950-6S
1.60 1.73
190950 SAE Male Inverted Flare 90 Elbow

Catalog Part No. Aeroquip Model Hose Size -03 -04 -06 -08 -10 -12 Fits Aeroquip Hose Model 2807-3, FC807-3 2807-4, FC807-4 2807-6, FC807-6 2807-8, FC807-8 2807-10, FC807-10 2807-12, FC807-12 Wt. 0.01 0.01 0.01 0.01 0.02 0.02 Price Each
Fluid Conveying
C1CA87 900568-3B
900568 Brass Sleeve
C1CA88 900568-4B C1CA90 900568-6B C1CA91 900568-8B C1CA83 900568-10B C1CA84 900568-12B
815
Hose Fittings
Steel E-Z Clip System For use with GH134 Multi-Refrigerant & FC505 (-04 size) Refrigerant Hoses
E-Z Clip Hose Fitting System
The Aeroquip E-Z Clip System is designed for assembly with Aeroquip GH134 Multi-Refrigerant hose. It's engineered connection exceeds SAE J2064 and has been vibration and impulse tested. Features: No guess work No leaking crimps No power supply needed As easy to use as a pair of pliers Easy to use in confined areas. Assembly Material Checklist: Clip Closing Pliers (FT1357). Guillotine blade (FT1356) or equivalent cutting tool. Refrigerant oil compatible with refrigeration or A/C system. GH134 Multi-Refrigerant hose. Appropriately sized clips (2 per fitting) and cage. Nipple assembly (The two black o-rings on the nipple assembly are of a specific rubber compound and size. They should NOT be removed or replaced). E-Z Clip Assembly Instructions: 1. Cut the Hose: Cut the hose to proper length. Be sure the cut is made square to the hose length. 2. Slip on Two Clips: Install two proper-sized clips onto the cut end of the hose. 3. Oil the Nipple: Lubricate the nipple with a generous amount of the refrigeration or A/C system's compressor oil. This MUST be done to lower the force of nipple insertion. 4. Insert the Nipple into the Hose: Insert the nipple into the hose. There should be no gap between the end of the hose and the shoulder on the nipple. Avoid kinking or damaging the hose while inserting nipple. 5. Snap on the Cage: Snap the cage into the groove on the nipple. When the cage has been correctly installed in the cage groove, the cage will be able to rotate in the groove. 6. Slide the Clips: Slide the clips over the cage arms and into the channels on each arm. 7. Close the Clips: Use the FT1357 Clip Closing Pliers to close the clips. The pliers should be positioned squarely on the clip connection points and should remain square during the closing of the clip. Note: E-Z Clip components should not be reused. CAUTION: Failure to follow these assembly instructions and/or the use of Aeroquip hose with fittings supplied by other manufacturers may result in unreliable and unsafe hose assemblies, which may result in sudden or unintended escape of refrigerant gases. Personal injury and/or violations of EPA regulations may occur as a consequence. Aeroquip recommends adherence to all guidelines, including EPA guidelines, concerning the service of refrigerant systems. How to Identify O-Ring Pilot Thread Sizes: page 1340
Catalog Part No. C1EX50 Aeroquip Model 1F40105-08C 1F40105-10C 1F40105-12C Hose Size -06 -08 -10 -12 Description Cage for size -06 hose Cage for size -08 hose Cage for size -10 hose Cage for size -12 hose Wt. 0.01 0.01 0.01 0.01 Price Each
Fluid Conveying
C1EX49 1F40105-06C C1EX51 C1EX52
1F40105 Cages
Note: (1) Cage required per fitting. Note: Cage for size 04 hose has just one channel for one clip.
816
Hose Fittings
Catalog Part No. C1EX45 C1EX46 C1EX47 C1EX48 Aeroquip Model 1F40104-06C 1F40104-08C 1F40104-10C 1F40104-12C A (in) Description Wt. 0.01 0.01 0.01 0.01 Price Each
0.71 Clip for size -06 hose 0.81 Clip for size -08 hose 0.91 Clip for size -10 hose 1.08 Clip for size -12 hose
Note: (2) Clips required per fitting for sizes 06 and larger. (1) Clip required per fitting for size 04.
1F40104 Clips
Catalog Part No. C1EY77 C1EY79 C1EY81 C1FL83 Aeroquip Model FJ5984-0606S FJ5984-0808S FJ5984-1010S FJ5984-1210S Thread T 5/8-18 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-14 Hose Size -06 -08 -08 -10 -10 -12 -10 D (in) 1.62 1.62 2.02 2.02 2.08 2.08 2.62 Wt. 0.09 0.11 0.14 0.17 0.24 0.29 0.35 Price Each
C1EY78 FJ5984-0608S C1EY80 FJ5984-0810S
FJ5984 Female O-Ring (short pilot)
C1EY82 FJ5984-1012S
Fluid Conveying
Catalog Part No.
Aeroquip Model
Thread T 5/8-18 3/4-16 3/4-16
Hose Size -06 -08 -10
D (in) F (in) Wt. 2.10 0.63 2.16 0.63 2.16 0.63 0.19 0.23 0.27
Price Each
C1EY44 FJ3053-0606S C1EY45 FJ3053-0808S C1FL45 FJ3053-0810S
FJ3053 Female O-Ring (short pilot) With High Side Charge Port (R134a)
Catalog Part No.
Aeroquip Model
Thread T 7/8-14 1-1/16-14
Hose Size -10 -12
D (in) F (in) Wt. 2.25 0.63 2.25 0.63 0.31 0.44
Price Each
C1EY46 FJ3054-1010S C1EY48 FJ3054-1212S
FJ3054 Female O-Ring (short pilot) With Low Side Charge Port (R134a)
817
Hose Fittings
Catalog Part No. C1FL46 C1FL47 Aeroquip Model FJ3055-01-0606S FJ3055-04-0810S Thread T 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-14 Hose Size -06 -08 -10 -10 -12 -12 D (in) H (in) Wt. 0.11 0.16 0.18 0.28 0.33 0.44 Price Each
2.08 0.67 2.40 0.73 2.40 0.73 2.81 1.19 2.88 1.25 3.75 1.47
C1EY50 FJ3055-03-0808S C1ZT26 FJ3055-05-1010S C1EY51 FJ3055-06-1012S C1EY52 FJ3055-07-1212S
Note: Bump Tube O-Ring Seal O-Rings page 1098 FJ3055 Female O-Ring (short pilot) 45 Elbow Catalog Part No. C1EY84 C1EY86 Aeroquip Model FJ5985-0606S FJ5985-0808S Thread T 5/8-18 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-14 Hose Size -06 -08 -08 -10 -10 -12 -12 D (in) H (in) Wt. 0.11 0.13 0.17 0.20 0.30 0.35 0.47 Price Each
1.79 1.38 1.79 1.38 2.23 1.62 2.23 1.62 2.67 1.89 2.67 1.89 3.16 2.56
C1EY85 FJ5985-0608S C1EY87 FJ5985-0810S C1EY88 FJ5985-1010S C1EY89 FJ5985-1012S
FJ5985 Female O-Ring (short pilot) 90 Elbow
C1EY90 FJ5985-1212S
Fluid Conveying
Catalog Part No.
Aeroquip Model
Thread T 5/8-18 3/4-16 3/4-16
Hose Size -06 -08 -10
D H (in) F (in) (in) 2.82 0.63 1.38 3.07 0.69 1.62 2.98 0.69 1.62
Wt. 0.21 0.26 0.29
Price Each
C1EY25 FJ3013-02-0606S C1EY26 FJ3013-03-0808S C1EY24 FJ3013-01-0810S
FJ3013 Female O-Ring (short pilot) 90 Elbow With High Side Charge Port (R134a)
Catalog Part No. C1EY22
Aeroquip Model FJ3012-02-1010S
Thread T 7/8-14 7/8-14
Hose Size -10 -12
D H (in) F (in) (in) 3.33 0.63 1.89 3.25 0.63 1.89
Wt. 0.38 0.42
Price Each
C1EY21 FJ3012-01-1012S
FJ3012 Female O-Ring (short pilot) 90 Elbow With Low Side Charge Port (R134a)
818
Hose Fittings
Catalog Part No. C1FL79 C1FL80 Aeroquip Model FJ3288-01-0606S FJ3288-02-0808S Thread T 5/8-18 3/4-16 Hose Size -06 -08 D (in) H (in) Wt. 0.11 0.17 Price Each
1.79 1.38 2.23 1.62
FJ3288 Female O-Ring (long pilot) 90 Elbow

Catalog Part No. C1FL81 C1FL82 Hose Size -08 -10 D H (in) F (in) (in) 2.59 0.69 1.62 2.77 0.63 1.93 Price Each
Aeroquip Model FJ3289-01-0808S FJ3289-02-1010S
Thread T 3/4-16 7/8-14
Wt. 0.20 0.35
FJ3289 Female O-Ring (long pilot) 90 Elbow With Switch Port (7/16-20)
Catalog Part No. C1FL71 C1FL73 Aeroquip Model FJ3162-0808S FJ3162-1212S Thread T 3/4-16 1-1/16-14 Hose Size -08 -12 D (in) F (in) Wt. 2.16 0.63 2.71 0.79 0.18 0.43 Price Each
Fluid Conveying
FJ3162 Female O-Ring (short pilot) With Charge Port (R12)

Catalog Part No. Aeroquip Model Thread T 1-14 1-3/16-12 Hose Size -10 -12 D (in) H (in) Wt. 0.27 0.50 Price Each
C1EY95 FJ5994-04-1010S C1EY94 FJ5994-03-1212S
1.53 1.27 1.78 1.90
Note: Size 04 fittings have only one o-ring on nipple that inserts into hose.
FJ5994 / GA23913 ORS Female Swivel 90 Elbow
819
Hose Fittings
Catalog Part No. C1FL40 C1FL41 C1FL42 C1FL44 Aeroquip Model FJ3026-0606S FJ3026-0808S FJ3026-1010S FJ3026-1212S Thread T 5/8-18 3/4-16 7/8-14 1-1/16-14 Hose Size -06 -08 -10 -12 D (in) 1.83 1.15 1.35 2.71 Wt. 0.09 0.11 0.18 0.37 Price Each
FJ3026 Male MIO (Male Insert O-Ring)
Aeroquip Model FJ5995-0808S
Hose Size -08 -10
D (in) F (in) Wt. 2.52 1.26 2.52 1.26 0.22 0.29
Price Each
C1EY98 FJ5995-1010S
FJ5995 Splicer With High Side Charge Port (R134a)

Catalog Part No. C1EY92 D (in) F (in) Wt. 2.44 1.22 2.44 1.22 0.26 0.35 Price Each
Fluid Conveying
Hose Size -10 -12
C1EY91 FJ5986-1010S
FJ5986 Splicer With Low Side Charge Port (R134a)
Catalog Part No. C1FL74
Hose Size -06 -08 -10 -12
D (in) F (in) Wt. 2.36 1.18 2.44 1.26 2.44 1.26 2.44 1.26 0.11 0.16 0.23 0.32
Price Each
C1EY74 FJ3171-0808S C1EY75 FJ3171-1010S
FJ3171 Splicer With Charge Port (R12)
C1EY76 FJ3171-1212S
820
Hose Fittings
Catalog Part No. Aeroquip Model Hose Size -06 -08 -10 -12 D (in) 1.58 1.68 2.58 1.57 Wt. 0.09 0.13 0.23 0.28 Price Each
C1EY34 FJ3045-0606S C1EY35 FJ3045-0808S C1EY36 FJ3045-1010S C1EY37 FJ3045-1212S
FJ3045 Splicer
Catalog Part No. C1EY38 C1EY41 Aeroquip Model FJ3052-0606S FJ3052-1010S Thread T 5/8-18 5/8-18 7/8-18 7/8-18 Hose Size -06 -08 -10 -12 D (in) 1.70 1.70 1.92 1.92 Wt. 0.09 0.10 0.19 0.24 Price Each
C1EY39 FJ3052-0608S C1EY42 FJ3052-1012S
FJ3052 Male O-Ring (short pilot)
Note: Bump Tube O-Ring Seal O-Rings page 1098 Catalog Part No. Hose Size -06 -10 D (in) H (in) Price Each
Aeroquip Model
Thread T 5/8-18 7/8-18
Wt. 0.10 0.23
C1FN46 FJ3116-01-0606S C1GG17 FJ3116-02-1010S
2.47 0.94 3.10 1.46
Fluid Conveying
FJ3116 Male O-Ring (short pilot) 45 Elbow
Aeroquip Model FJ3019-03-0606S
Thread T 5/8-18 7/8-18 1-1/16-16
Hose Size -06 -10 -12
D (in)
H (in)
Wt. 0.10 0.27 0.37
Price Each
1.80 1.77 2.67 2.45 2.67 2.45
C1EY33 FJ3019-07-1010S C1EY31 FJ3019-05-1212S
FJ3019 Male O-Ring (short pilot)
Catalog Part No. C1FL63 C1FL64
Aeroquip Model FJ3134-02-0808S FJ3134-03-1010S
Thread T 3/4-18 7/8-18
Hose Size -08 -10
D H (in) F (in) (in) 3.07 0.63 2.31 3.25 0.63 2.34
Wt. 0.27 0.36
Price Each
FJ3134 Male O-Ring (short pilot) 90 Elbow With High Side Charge Port (R134a)
821
Hose Fittings
Catalog Part No. Aeroquip Model Thread T 7/16-20 5/8-18 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-14 Hose Size -04 -06 -08 -08 -10 -10 -12 -12 D (in) 1.34 1.62 1.62 2.02 2.02 2.08 2.08 2.67 Wt. 0.04 0.09 0.12 0.13 0.19 0.21 0.26 0.35 Price Each
C1HL30 GA24048-4-4 C1EY53 FJ3057-01-0606S C1EY54 FJ3057-02-0608S C1EY55 FJ3057-03-0808S
FJ3057 Female SAE 45 Swivel
C1EY56 FJ3057-04-0810S C1EY57 FJ3057-05-1010S C1EY58 FJ3057-06-1012S C1EY59 FJ3057-07-1212S
Catalog Part No.
Aeroquip Model
Thread T 3/4-16
Hose Size -08
D (in)
H (in)
Wt. 0.15
Price Each
C1EY60 FJ3059-03-0808S
1.43 0.55
Fluid Conveying
FJ3059 Female SAE 45 Swivel 45 Elbow

Catalog Part No. Aeroquip Model Thread T 5/8-18 3/4-16 7/8-14 Hose Size -06 -08 -10 D (in) H (in) Wt. 0.10 0.16 0.25 Price Each
C1EY67 FJ3149-01-0606S C1EY69 FJ3149-03-0808S C1EY70 FJ3149-04-1010S
1.80 1.77 2.23 2.31 2.23 2.31
FJ3149 Female SAE 45 Swivel 90 Elbow

Catalog Part No. Aeroquip Model Thread T 7/8-14 Hose Size -10 D H (in) F (in) (in) 3.25 0.63 1.89 Wt. 0.40 Price Each
C1EY66 FJ3133-03-1010S
FJ3133 Female SAE 45 Swivel x 90 Elbow With High Side Charge Port (R134a)
822
Hose Fittings
Catalog Part No. Aeroquip Model Thread T 1-14 Hose Size -10 D (in) H (in) Wt. 0.27 Price Each
C1GD98 FJ3225-1010S
1.43 1.52
FJ3225 Female RotaLok
Catalog Part No. C1EX94 C1EX96
Aeroquip Model FF12262-0606 FF12262-0808
Tube O.D. (in) 3/8 3/8 1/2 1/2 5/8 5/8 3/4
Hose Size -06 -08 -08 -10 -10 -12 -12
A (in)
E (in)
Wt. 0.04 0.05 0.05 0.08 0.08 0.12 0.12
Price Each
2.01 0.38 2.02 0.38 2.02 0.50 2.03 0.50 2.03 0.63 2.06 0.63 2.11 0.75
C1EX95 FF12262-0608 C1EX97 FF12262-0810 C1EX98 FF12262-1010
FF12262 Lifesaver
C1EX99 FF12262-1012 C1EY11 FF12262-1212
Fluid Conveying
Catalog Part No.
Aeroquip Model
Tube O.D. (in) 0.39 0.47 0.63 0.71
Hose Size -06 -08 -10 -12
Wt. 0.07 0.09 0.10 0.14
Price Each
C1HE78 FF13727-1006 C1HE79 FF13727-1208 C1HE80 FF13727-1610 C1HE81 FF13727-1812
Note: Each kit consists of (2) aluminum nipples, (3) aluminum braze rings and (5) HNBR nipple o-rings.
FF13727 Aluminum Lifesaver Kit

Aeroquip Model
Description Clip Closing Tool
Wt. 0.41
C1EZ24 FT1357
FT1357 Clip Closing Tool
823
Hose Fittings
Catalog Part No. Aeroquip Model Description Hose Cutter Replacement Blade for Hose Cutter Wt. 0.28 0.06 Price Each
C1EZ22 FT1356 C1EZ23 FT1356-2-1
FT1356 Hose Cutter
Catalog Part No.
Aeroquip Model
Description Low Side Schraeder (For Aeroquip high flow charge ports only)
Wt. 0.01
Price Each
Core Tool / Schraeder Valves
C1EY16 FF90192-01
Fluid Conveying
Catalog Part No.
Aeroquip Model
Description Nipple O-Ring for size -06 fittings Nipple O-Ring for size -08 fittings Nipple O-Ring for size -10 fittings
Wt. 0.01 0.01 0.01
Price Each
C1EX55 1F40106-6 C1EX56 1F40106-8 C1EX53 1F40106-10
FF40106 Nipple O-Rings
Catalog Part No.
Aeroquip Model
Description E-Z Clip System Tool Case. Contains 1ea FT1357 Assembly Tool, 1ea FT1356 Hose Cutter and FT1356-2-1 Replacement Blade, 20 of each size 1F40104 Clip, 10 of each size 1F40105 Cage.
Wt.
Price Each
C1EX93 FF12139
4.98
FF12139 E-Z Clip System Tool Case
824
Hose Fittings
Stainless Steel Crimp
Global TTC Fittings

For use with hose: 2661, FC579, FC619, FC693, FC735, GH195, GH663, GH781, GH793
Catalog Part No. Hose Size -04 -06 -08 -10 -12 -16 Global TTC Fittings D Price (in) Wt. Each 1.07 1.28 1.46 1.61 1.65 1.93 0.10 0.16 0.24 0.33 0.45 0.78
Aeroquip Model
Thread 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
C1AP92 1AA4FJ4C
C1AQ30 1AA6FJ6C C1AQ63 1AA8FJ8C C1GG46 1AA10FJ10C C1AP35 1AA12FJ12C C1AP65 1AA16FJ16C
Synflex Swage Fittings

For use with hose: 25CT (-08), 30CT (-03 to -08), 3130, 3440 (-04 to -08), 37AL, 3800
Catalog Part No. C1HW75 Synflex Swage Fittings Pusher Used Price Hose Size B (in) 4599 Wt. Each -06 1.56 -FP015 0.20
Synflex Model 390A-06546
Thread 9/16-18
Fluid Conveying
390A Code 540 Female JIC 37 Swivel
Flat Crimp Fittings

For use with hose: 2807, FC807, STW
Catalog Part No. Hose Size -04 -05 -06 -08 Flat Crimp Fittings D Price (in) Wt. Each 0.96 1.01 1.11 1.21 0.03 0.04 0.05 0.10
Aeroquip Model
Thread 7/16-20 1/2-20 9/16-18 3/4-16
C1CT36 FC8779-0404-333 C1ZX91 FC8779-0505-333 C1EK57 FC8779-0606-333 C1CT40 FC8779-0808-333
Note: Image of fitting shows crimp socket (separately purchased item). Select Flat Crimp Socket from FC3443/FC3596 table below. Flat Crimp Fittings Fits Aeroquip Hose Price Wt. Model Each 2807-4, FC807-04 2807-5, FC807-05 2807-6, FC807-06 2807-8, FC807-08 2807-12, FC807-12 0.01 0.01 0.01 0.03 0.02
Catalog Part No.
Aeroquip Model
Hose Size -04 -05 -06 -08 -12
C1CR83 FC3596-04C
FC3443 / FC3596 C1CR73 FC3443-05C Flat Crimp Sockets for use with C1CR85 FC3596-08C hose: 2807, FC807
C1FM70 FC3596-12C
C1CR71 FC3443-04C
825
Hose Fittings
Stainless Steel Crimp
Flat Crimp Fittings - Convoluted

For use with hose: FC363, FC364
Catalog Part No. C1KG91 Flat Crimp Fittings - Convoluted Hose D Price Size (in) Wt. Each -20 1.70 0.74
Aeroquip Model FC1349-2020-259
Thread 1-1/4-11-1/2
FC1349 Male Pipe

Catalog Part No. C1KG90 Flat Crimp Fittings - Convoluted Price Hose Size Wt. Each -20 0.08
Aeroquip Model FC1347-20-329
Fluid Conveying
FC1347 Flat Crimp Sockets for use with hose: FC363, FC364
826
Hose Fittings
Stainless Steel Crimp EverSwage EverSwage Crimp Fittings for use with hose: SC
Catalog Part No.
Everflex Model
Thread 1/8-27
Hose Size -4
Cut Off (in)
Wt. 0.03
Price Each
C1DF78 NM2-4-S
NM Male Pipe
Catalog Part No. C1JS62 Everflex Model NJIC-4-S Thread 7/16-20 Hose Size -4
Cut Off (in)
Wt. 0.05
Price Each
NJIC Female JIC 37 Swivel Consists of NNJ nut, NJ insert and NJC short collar
** WARNING **: Do NOT use Everflex hose end NJIC-4S with Adaptall SS9200-04-06 or SS9200-04-08 adapters. The Adaptall flare is shorter than normal and does not make contact properly with the flare seat on the Everflex hose end.
Catalog Part No. C1JB27
Everflex Model NJ-4-316
JIC Size -4
Fits Everflex Hose Model SC-4
Wt. 0.01
Price Each
NJ JIC Female Insert

Catalog Part No. C1JJ56 Hose Size -4 Cut Off (in) Price Each
Fluid Conveying
Everflex Model PT-S-4
Thread 3/8-24
Wt. 0.04
PT SAE Male Inverted Flare

Cut Off (in)
Everflex Model PT-45-4
Thread 3/8-24
Hose Size -4
A (in)
B (in)
Wt. 0.04
Price Each
2.75 0.75
PT45 SAE Male Inverted Flare 45 Elbow
827
Hose Fittings
Stainless Steel Crimp EverSwage EverSwage Crimp Fittings for use with hose: SC
Everflex Model PT-90-4
Thread 3/8-24
Hose Size -4
Cut Off (in)
A (in)
B (in)
Wt. 0.04
Price Each
2.00 1.00
PT90 SAE Male Inverted Flare 90 Elbow

Catalog Part No. Everflex Model Hose Size -4 Fits Everflex Hose Model SC-4 Wt. 0.01 Price Each
C1DF68 NC-4-316
NC Crimp Sockets for use with hose: SC
Fluid Conveying
828
Hose Fittings
Stainless Steel Reusable
1 wire braid Reduced Bore Fittings

For use with hose: 2651, FC234, FC300, FC321, FC350, FC355, FC558, FC802
Catalog Part No. 1 wire braid Reduced Bore Fittings Hose D Price Thread Size (in) Wt. Each 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 -04 -06 -08 -10 -12 -16 1.23 1.43 1.62 1.81 1.92 1.93 0.09 0.15 0.30 0.39 0.58 0.74
Aeroquip Model
C1BH47 259-4411-4 C1BH48 259-4411-6 C1BH49 259-4411-8
4411 C1BH46 259-4411-12 Female JIC 37 Swivel (Two piece fitting, no mandrel C1ZU13 259-4411-16 required)
C1BH45 259-4411-10
2 wire braid Skive Fittings

For use with hose: FC195
Catalog Part No. 2 wire braid Skive Fittings Hose D Price Size (in) Wt. Each -12 -16 1.99 2.43 0.96 1.50
Aeroquip Model
Thread 1-1/16-12 1-5/16-12
C1BH50 259-4721-12 C1BH51 259-4721-16
Fluid Conveying
Fittings for use with SOCKETLESS Hose

Miscellaneous Products For use with hose: 2556, FC332, FC647, Easy Couple
Catalog Part No. C1CY22 H80250-4-4 C1CY24 H80250-8-8 C1CY21 H80250-12-12 Fittings for use with SOCKETLESS Hose Hose D Price Thread Size (in) Wt. Each 7/16-20 3/4-16 1-1/16-12 -04 -08 -12 0.75 0.93 1.15 0.06 0.12 0.32
SSP Model
H80250 Female JIC 37 Swivel
Catalog Part No. C1EW89 H80220-6-6
SSP Model
Fittings for use with SOCKETLESS Hose Hose D Price Size (in) Wt. Each Thread 3/8-18 -06 0.95 0.08
H80220 Male Pipe
829
Hose Fittings
Stainless Steel Reusable Teflon 1 Braid Fittings for use with hose: 2807, FC807, STW
Catalog Part No.
Aeroquip Model
Thread 3/8-24 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
Hose Size -03 -04 -06 -08 -10 -12 -16
Cut Off (in) 1.13 1.22 1.35 1.54 1.67 1.91
Wt. 0.04 0.09 0.05 0.20 0.25 0.36 0.55
Price Each
C1ZY27 FBM1130
C1AM42 190600-4C C1AM44 190600-6C C1AM45 190600-8C C1EM26 190600-10C C1AM40 190600-12C C1FA28 190600-16C
Catalog Part No.
Aeroquip Model
Thread 3/8-24 7/16-20
Hose Size -03 -04
Cut Off (in)
Wt. 0.07 0.30
Price Each
C1EA62 FBM1140 C1EA63 FBM1146
Fluid Conveying
Female JIC 37 Swivel 45 Elbow

Catalog Part No. Hose Size -03 -04 Cut Off (in) Price Each
Aeroquip Model
Thread 3/8-24 7/16-20
Wt. 0.40 0.10
Female JIC 37 Swivel 90 Elbow

Catalog Part No. Hose Size -04 -12 Price Each
Aeroquip Model
Fits Aeroquip Hose 2807-4 2807-12
Wt. 0.01 0.02
C1EH43 900568-4C
900568 Stainless Steel Sleeve
C1EH42 900568-12C
830
Hose Fittings
Brass Crimp Polyon Crimp Polyon Crimp Fittings for use with hose: FC372, FC373, FC901, FC902
Catalog Part No. Aeroquip Model C1FE98 FJ3337-0404B C1FE99 FJ3337-0606B
Thread 7/16-20 9/16-18
Hose Size -04 -06
D (in)
Wt. 0.14 0.21
Price Each
831
Hose Fittings
Brass Crimp Marine Steering Crimp Fittings for use with MSH Marine Steering Hose
Catalog Part No.
Trident Marine Model
Thread 5/8-18 5/8-18
Hose Size -05 -06
B (in) 1.00 1.00
Wt. 0.12 0.13
Price Each
C1HW23 108MS-6-5B C1HW24 108MS-6-6B
108MS Female SAE 45 Swivel
Catalog Part No.
Tube O.D. (in) 3/8
Hose Size -05
Hose Cut Off (in)
Wt. 0.12
Price Each
C1HW37 1TFMS-6-5B
Note: The SeaStar female swivel mates with a 3/8 O.D. brass compression tube fitting connection. Eaton Tube Fittings, Brass Compression page 903
Fluid Conveying
1TFMS SeaStar Female Swivel
832
Hose Fittings
Brass Reusable 1 Wire Braid 1 Wire Braid Reduced Bore Fittings (SAE100R5 Style) for use with hose: 2651, FC234, FC300, FC321, FC350, FC355, FC558, FC802
Catalog Part No.
Mandrel Aeroquip Model Required Yes Yes Yes Yes
Thread 1/8-27 1/4-18 3/8-18 3/4-14
Hose Size -04 -06 -08 -12
D (in) 0.92 1.23 1.33 1.67
Wt. 0.10 0.12 0.23 0.44
Price Each
C1DX21 412-2-4B C1DX22 412-4-6B C1BP42 412-6-8B
412 / 44-412 Male Pipe (Mandrel required on most sizes)
C1BP30 412-12-12B
Catalog Part No.
Mandrel Aeroquip Model Required Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Thread 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 3-12
Hose Size -04 -05 -06 -06 -08 -10 -12 -16 -20 -20 -24 -40
D (in) 1.0 1.12 1.15 1.15 1.38 1.51 1.58 1.55 1.64 1.64 1.83 2.25
Wt. 0.08 0.10 0.14 0.14 0.25 0.36 0.52 0.50 1.26 1.28 1.65 4.00
Price Each
C1BP22 411-4B C1BP24 411-5B C1BP26 411-6B C1FS49 NP411-6B C1BP28 411-8B C1BP11 411-10B C1BP13 411-12B C1BP14 411-16B C1BP16 411-20B C1FG99 NP411-20B C1BP18 411-24B C1BQ17 44-411-40
411 / 44-411 Female JIC 37 Swivel (Three piece fitting, larger bore) (Mandrel required all sizes)
Fluid Conveying
Mandrels: Assembly Mandrels page 752 NP Models: Nickel Plated. Catalog Part No. Mandrel Aeroquip Model Required Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Hose Size -04 -04 -05 -06 -06 -08 -08 -10 -10 -12 D (in) 1.00 1.00 1.12 1.15 1.15 1.38 1.38 1.51 1.51 1.45 Price Each
Thread 7/16-20 7/16-20 1/2-20 5/8-18 5/8-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-14
Wt. 0.08 0.08 0.09 0.14 0.15 0.24 0.07 0.30 0.37
C1BN70 401-4B C1FK82 NP401-4B C1BN71 401-5B
401 Female SAE 45 Swivel (Three piece fitting, larger bore) (Mandrel required all sizes)
C1BN72 401-6B C1FG97 NP401-6B C1BN74 401-8B C1FG98 NP401-8B C1BN66 401-10B C1FK81 NP401-10B C1BN68 401-12B
0.49
Mandrels: Assembly Mandrels page 752 NP Models: Nickel Plated.
833
Hose Fittings
Brass Reusable SOCKETLESS SOCKETLESS Fittings for use with hose: 2556, FC332, FC647, Easy Couple
Catalog Part No. C1BQ88 C1BQ89 C1BQ90 C1BQ91 C1BQ94 C1BQ87
Aeroquip Model 4738-2-4B 4738-4-4B 4738-4-6B 4738-6-6B 4738-8-8B 4738-12-12B
Thread 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14
Hose Size -04 -04 -06 -06 -08 -08 -10 -12
D (in) 0.65 0.83 0.89 0.89 0.89 1.14 1.14 1.21
Wt. 0.03 0.06 0.10 0.07 0.10 0.15 0.18 0.24
Price Each
4738 Male Pipe
C1BQ92 4738-6-8B C1BQ93 4738-8-10B
Catalog Part No.
Aeroquip Model
Thread 1/4-18 3/8-18 1/2-14
Hose Size -04 -06 -08
D (in) 0.77 0.83 1.02
Wt. 0.09 0.12 0.25
Price Each
C1BR28 4753-4-4B C1BR29 4753-6-6B C1BR30 4753-8-8B
Fluid Conveying
4753 Female Pipe

Catalog Part No. C1BR42 Aeroquip Model 4797-4B Thread 7/16-20 7/16-20 1/2-20 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 Hose Size -04 -04 -04 -06 -08 -08 -08 -10 -10 D (in) 0.71 0.71 0.77 0.93 0.93 0.93 1.06 1.06 1.06 Wt. 0.04 0.04 0.05 0.10 0.11 0.11 0.16 0.17 0.17 Price Each
C1FH14 NP4797-4B C1BR43 4797-5-4B
4797 Female JIC 37 and SAE 45 Swivel (Universal) Nut has double notch.
C1BR44 4797-8-6B C1BR45 C1BR40 C1BR41 4797-8B 4797-10-8B 4797-10B C1FH15 NP4797-8B
C1FH13 NP4797-10B NP Models: Nickel Plated. Catalog Part No. C1BQ96
Aeroquip Model 4739-6B
Thread 5/8-18 5/8-18 1-1/16-14 1-1/16-14
Hose Size -06 -06 -12 -12
D (in) 0.81 0.81 1.19 1.19
Wt. 0.06 0.07 0.27 0.27
Price Each
C1FH12 NP4739-6B
C1BQ95 4739-12B
4739 Female SAE 45 Swivel (Nut has single notch)
C1FH11 NP4739-12B NP Models: Nickel Plated.
834
Hose Fittings
Catalog Part No. C1BR15 C1BR14
Aeroquip Model 4741-6B 4741-12B
Thread 9/16-18 1-1/16-12
Hose Size -06 -12
D (in) 0.80 1.19
Wt. 0.06 0.28
Price Each

Catalog Part No. Aeroquip Model Thread 7/16-20 1/2-20 5/8-18 3/4-16 Hose Size -04 -04 -06 -08 D (in) 0.83 0.89 0.95 1.08 Wt. 0.04 0.04 0.07 0.11 Price Each
C1BR16 4742-4B C1BR17 4742-5-4B
4742 Male SAE 45 Flare
C1BR18 4742-6B C1BR19 4742-8B
Catalog Part No.
Aeroquip Model
Thread 3/8-24 7/16-24 1/2-20 5/8-18 3/4-18 7/8-18
Hose Size -04 -04 -04 -06 -08 -10
D (in) 0.75 0.75 0.82 0.86 0.94 1.01
Wt. 0.03 0.03 0.04 0.06 0.10 0.16
Price Each
C1BQ98 4740-3-4B C1BQ99 4740-4B
Fluid Conveying
4740 SAE 45 Male Inverted Flare
C1BR11 4740-5-4B C1BR12 4740-6B C1BR13 4740-8B C1BQ97 4740-10B
Catalog Part No.
Aeroquip Model
Thread 7/16-24 1/2-20 5/8-18
Hose Size -04 -04 -06
D (in) 0.46 0.49 0.55
Wt. 0.05 0.03 0.07
Price Each
C1BR21 4743-4B C1BR22 4743-5-4B C1BR23 4743-6B
4743 SAE 42 Inverted Female Flare
Catalog Part No.
Aeroquip Model
Hose Size -04 -06 -08 -10 -12
D (in) 0.32 0.32 0.38 0.47 0.54
Wt. 0.04 0.06 0.12 0.23 0.29
Price Each
C1BR33 4772-4B C1BR34 4772-6B
4772 Hose Mender
C1BR35 4772-8B C1BR31 4772-10B C1BR32 4772-12B
835
Hose Fittings
Catalog Part No.
Aeroquip Model
Tube O.D. (in) 0.38
Hose Size -06
Hose Cut Off (in) Wt. 1.21 0.03
Price Each
C1BR26 4750-6B
Fluid Conveying
4750 Compression Type
836
Hose Fittings
Brass Reusable Marine Steering Reusable Fittings for use with MSH Marine Steering Hose
Catalog Part No.
Thread 5/8-18 5/8-18
Hose Size -05 -06
B (in) 1.00 1.00
Wt. 0.16 2.25
Price Each
C1HW38 208MS-6-5B C1HW39 208MS-6-6B
208MS Female SAE 45 Swivel Pneumatic Power & Control

Hose Cut Hose Off Size (in) Wt. -05 0.16
Catalog Part No.
Tube O.D. (in) 3/8
Price Each
C1HW48 2TFMS-6-5B
Note: The SeaStar female swivel mates with a 3/8 O.D. brass compression tube fitting connection. Eaton Tube Fittings, Brass Compression page 903
2TFMS SeaStar Female Swivel
837
Hose Fittings (Industrial)

Hydraulic Power & Control Category Page 839 839 843 845 846 847 847 850 852 Shank Type Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cam & Groove Couplers & Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Universal Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Conveying
Industrial Hose Application Warnings The determination and methods of the use, suitability, installation and design application for the parts and assemblies we sell is the responsibility of the purchaser. Hose conforms to the specification and requirements specified by the hose manufacturer. The determination and methods of use, suitability, installation, design and application for the parts and assemblies we sell is the responsibility of the purchaser. Agency and industry standards may apply to your application. It is your responsibility to decide what regulations and/or standards apply, and inform us. We will then advise you if the products selected meet those standards. If you need specific product information on our products or assemblies, we are glad to provide it upon request. (We keep a selection of literature at all of our locations). We also have available, upon request, brochures and information regarding general use and safety issues for industrial hose products and assemblies. Improper selection, installation and/or routing may significantly shorten the life of a hose, which could result in hose rupture and failure, which may then result in serious personal injury or property damage. Many fluids are flammable and proper safeguards have to be taken to contain any fluid if a hose failure occurs in an environment with a source of ignition. Hoses have a service life, and high repetitive shock reduces hose service life. You need to inspect and change out hoses within their service life for your application or hose rupture and failure may occur. S.T.A.M.P. - You must consider the Size, Temperature, Application, Medium and Pressure when selecting hose and hose fittings.
838

Shank Type Fittings (Short Shank Hose Barbs) Brass
Short Shank Brass Fittings

Construction: Machined from free cutting brass rod CDA 360 alloy. Application: Low pressure fluid transfer, suction and discharge. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of shank type fittings will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380
Catalog American Nickel Part No. Coupling Model Plated C1AG43 102-0202 C1EZ96 102-0204 No No No No No No No No No No No No No No No No No No No No No No No No No No Yes Hose C I.D. (in) Pipe Thread (in) 1/8 1/8 3/16 3/16 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 1 1 1-1/4 1-1/4 1/8-27 1/4-18 1/8-27 1/8-27 1/8-27 1/4-18 3/8-18 1/8-27 1/4-18 3/8-18 1/8-27 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 3/4-14 3/8-18 1/2-14 3/4-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1.57 0.97 1.76 0.97 1.76 0.97 1.57 0.97 1.76 0.97 1.76 0.97 1.57 0.97 1.76 0.97 1.76 0.97 1.97 0.97 1.76 0.97 1.76 0.97 1.97 0.97 1.97 0.97 1.76 0.97 1.97 0.97 1.97 0.97 2.19 1.19 2.19 1.19 2.19 1.19 2.54 1.19 D (in) Wt. 0.02 0.03 0.02 0.02 0.05 0.05 0.07 0.03 0.07 0.60 0.07 0.07 0.06 0.25 0.07 0.07 0.25 0.16 0.10 0.15 0.25 0.25 0.25 0.25 0.27 0.47 0.46 Price Each
1.06 0.46 1.16 0.46 1.35 0.75
102 Male Pipe
C1GA70 102-0302 C1GH46 32-002 C1AG44 102-0402 C1AG45 102-0404 C1AG46 102-0406 C1AG47 102-0502 C1AG48 102-0504 C1FL18 102-0506 C1AG49 102-0602 C1AG50 C1AG51 102-0604 102-0606
Fluid Conveying
C1AG52 102-0608 C1AG53 102-0804 C1AG54 C1AG55 102-0806 102-0808
C1AG56 102-0812 C1AG57 102-1006 C1AG58 C1AG60 C1AG61 C1AG62 C1AG63 102-1008 102-1208 102-1212 102-1612 102-1616 C1AG59 102-1012
C1FN17 4244-20-16 C1GF54 NP32-028
Note: 4244 is Tompkins model. 32 is ACR model.
839


Catalog Part No. Hose I.D. (in) Model Number 1/4 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 1 O.A. Length (in) Cut Off (in) Price Each
Pipe Thread 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 1-11-1/2
Wt. 0.05 0.06 0.11 0.06 0.08 0.10 0.08 0.10 0.11 0.09 0.13 0.55
C1CH19 A29E-1/4X1/8 C1CH18 A29E-1/4X1/4 C1GH97 A29E-1/4X3/8 C1CH21 A29E-3/8X1/4 C1CH22 A29E-3/8X3/8 C1CH20 A29E-3/8X1/2 C1HD75 32-048 C1EP40 A29E-1/2X3/8 C1GM68 32-311 C1GF80 32-044 C1GF81 32-045 C1GC76 312-055 Note: 32 is ACR model. Catalog Part No.
A29E Male Pipe 90 Elbow
American Coupling Model
Hose I.D. Pipe Thread (in) 1/4 5/16 3/8 3/8 1/2 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18
C (in)
D (in)
Wt. 0.07 0.05 0.05 0.06 0.07
Price Each
C1AG90 104-0404 C1EL55 104-0504 C1AG92 104-0604
1.66 0.97 1.66 0.97 1.66 0.97 1.66 0.97 1.66 0.97
Fluid Conveying
104 Female Pipe (Rigid)
C1AG93 104-0606 C1AG94 104-0806
Catalog Part No. C1AJ49 C1AJ50
American Coupling Model 124-0402 124-0404 124-0504 124-0604 124-0606 124-0806 124-0808
Hose I.D. C (in) NPSM Thread (in) 1/4 1/4 5/16 3/8 3/8 1/2 1/2
E (in)
Wt. 0.03 0.05 0.50 0.05 0.10 0.08 0.10
Price Each
1/8-27 NPSM 1.30 0.97 1/4-18 NPSM 1.39 0.97 1/4-18 NPSM 1.39 0.97 1/4-18 NPSM 1.37 0.97 3/8-18 NPSM 1.45 0.97 3/8-18 NPSM 1.42 0.97 1/2-14 NPSM 1.54 0.97
124 Female Pipe (Swivel)
C1AJ51 C1AJ52 C1AJ53 C1AJ54 C1AJ55
Catalog American Nickel Part No. Coupling Model Plated C1FS72 143-0407 C1FS73 143-0408 No No No No No No No No No
Hose I.D. (in) 1/4 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2
Thread 7/16-20 1/2-20 5/8-18 1/2-20 5/8-18 5/8-18 3/4-16 3/4-16 7/8-14
C (in)
E (in)
Wt. 0.04 0.05 0.06 0.05 0.07 0.07 0.10 0.11 0.18
Price Each
1.25 0.97 1.31 0.97 1.27 0.97 1.31 0.97 1.27 0.97 1.27 0.97 1.34 0.97 1.34 0.97 1.34 0.97
143 / 144 Female Flare Swivel 143 has Dual 37/45 Flare Seats 144 has 45 Flare Seat
C1FS79 144-0410 C1FS74 143-0508 C1FS80 144-0510 C1FS81 144-0610 C1FS75 143-0612 C1FS76 143-0812 C1FS77 143-0814
840

Catalog Part No. American Coupling Model Hose I.D. C (in) NPSH Thread (in) 3/8 1/2 5/8 3/4 3/4-11-1/2 3/4-11-1/2 3/4-11-1/2 3/4-11-1/2 D (in) Wt. 0.12 0.12 0.13 0.15 Price Each
C1BV95 590-0612 C1BV96 590-0812 C1BV97 590-1012 C1BV98 590-1212
1.88 1.19 1.88 1.19 1.88 1.19 1.88 1.19
590 Male Garden Hose (NPSH Thread)
Catalog Part No.
American Coupling Model
Hose I.D. C (in) NPSH Thread (in) 3/8 1/2 5/8 3/4 3/4-11-1/2 3/4-11-1/2 3/4-11-1/2 3/4-11-1/2
D (in)
Wt. 0.11 0.12 0.12 0.30
Price Each
C1ET96 591-0612 C1BW15 591-0812 C1BW16 591-1012
1.82 1.19 1.82 1.19 1.82 1.19 1.82 1.19
591 Female Garden Hose (NPSH Thread)
C1BW17 591-1212
Catalog Part No.
Kuriyama Model
Shank Hose I.D. Length NPSH Thread (in) (in) 1/2 3/4-11-1/2 1.18
Wt. 0.25
Price Each
C1GJ26 BRGHT050
BRGHT Heavy Duty Forged Brass Garden Hose Sets (Male & Female)
Catalog Part No. American Coupling Model C (in) D (in) Price Each
Fluid Conveying
Hose I.D. (in) 3/16 1/4 5/16 3/8 1/2 5/8 3/4
Wt. 0.01
C1GH47 32-092 (ACR Model) C1AL46 178-0404
2.03 0.97 2.06 0.97 2.06 0.97 2.06 0.97 2.06 0.97 2.50 1.19
0.02 0.03 0.05 0.06 0.07 0.13
178 Hose Splicer
C1FW40 178-0505 C1AL47 178-0606 C1AL48 178-0808 C1FJ62 C1FJ63 178-1010 178-1212
Catalog Part No.
ACR Model
Hose I.D. (in) 1/4 3/8 1/2
C (in)
D (in)
Wt. 0.06 0.05 0.10
Price Each
C1FW55 32-159 C1FW56 32-160 C1FW57 32-162
179 Hose Tee
841

Shank Type Fittings Brass
Combination Nipples (Brass, Medium Shank)

Construction: Made from tubular brass stock. Male NPT threaded ends. Application: Combination nipples are recommended for low pressure discharge and suction service for compatible liquids. NOT for compressible products such as air or nitrogen on sizes 1-1/4 and above. NOT for steam. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of combination nipples will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Combination Nipples (Brass, Medium Shank)
Catalog Part No. Dixon Model O.A. Cut Length Off Hose I.D. (in) (in) (in) Pipe Thread 1-1/4 1-1/2 2 1-1/4 1-1/2 2 Wt. 0.65 0.01 1.13 Price Each
C1EP49 BST15 C1EP50 BST20
BST Male Pipe Combination Nipple
C1EW56 BST25
Note: Not intended for compressed air applications.
Fluid Conveying
842

Shank Type Fittings Steel
Combination Nipples (Steel, Medium Shank)

Construction: Made from tubular steel stock. Male NPT threaded ends. Dixon ST and Kuriyama STN models are un-plated. Dixon STC and Kuriyama SPN models are plated. See table. Application: Combination nipples are recommended for low pressure discharge and suction service for compatible liquids. NOT for compressible products such as air or nitrogen on sizes 1-1/4 and above. NOT for steam. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of combination nipples will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Combination Nipples (Steel, Medium Shank)
Catalog Part No. Model Mfg. Name Dixon Dixon Dixon Dixon Dixon Hose I.D. (in) 3/4 1 1 1-1/4 Pipe Thread 3/4-14 3/4-14 1-11-1/2 1-11-1/2 O.A. Cut Length Off (in) Plated (in) Yes Yes No Yes Yes No No No No No No No Wt. 0.26 0.23 0.31 0.34 0.52 0.44 0.77 0.87 1.63 2.08 3.66 9.87 Price Each
C1GE21 STC5 C1EX17 STC-1005 C1DL23 ST-10 C1ER46 STC-1510 C1ER47 STC-2015 C1KH58 STN125
1-1/2 1-1/4-11-1/2
Kuriyama 1-1/4 1-1/4-11-1/2 Kuriyama 1-1/2 1-1/2-11-1/2 Kuriyama Kuriyama Kuriyama Kuriyama 2 3 4 6 2-11-1/2 2-1/2-8 3-8 4-8 6-8 Kuriyama 2-1/2
Fluid Conveying
ST / STC / STN Male Pipe Combination Nipple
C1GA62 STN150 C1GA63 STN200 C1GA64 STN250 C1GA65 STN300 C1GA66 STN400 C1GA67 STN600
Note: Not intended for compressed air applications.
Steel Nipples (Medium Shank)

Application: Tool end hose fitting for whip hoses used on vibrating air tools. Heat treated steel nipple withstands vibration from pavement breakers and air drills. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of combination nipples will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Steel Nipples (Medium Shank)
Catalog Part No. Model Mfg. Name Dixon Dixon Hose I.D. (in) 3/4 1 Pipe Thread 3/4-14 1 O.A. Cut Length Off Plated (in) (in) Yes Yes Wt. 0.49 0.75 Price Each
Male Pipe Steel Nipple
C1JC42 3514 C1JC43 3518
843

Shank Type Fittings Steel
Hose Menders (Steel, Medium Shank)

Construction: Zinc plated steel. Application: Not for compressible products such as air, nitrogen or steam. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of menders will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Hose Menders (Steel, Medium Shank)
Model
Manufacturer Kuriyama Kuriyama Kuriyama Kuriyama
Hose I.D. (in) 3/4 1 1-1/2 2
Wt. 0.20 0.30 0.50 0.80
C1KN54 SPHM075
DM Hose Mender
C1KN55 SPHM100 C1GF59 SPHM150 C1GF60 SPHM200
Fluid Conveying
844

Shank Type Fittings Stainless Steel
Combination Nipples (Stainless Steel, Medium Shank)

Construction: Made from tubular stainless steel stock. Male NPT threaded ends. Application: Combination nipples are recommended for low pressure discharge and suction service for compatible liquids. NOT for compressible products such as air or nitrogen on sizes 1-1/4 and above. NOT for steam. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of combination nipples will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Combination Nipples (Stainless Steel, Medium Shank)
Catalog Part No. Dixon Model O.A. Cut Length Off Hose I.D. (in) (in) (in) Pipe Thread 3/4 1 1 1-1/4 1-1/2 1-1/2 2 3/4-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 Wt. 0.23 0.20 0.01 0.22 1.02 0.32 Price Each
C1ER32 RST-5
RST Male Pipe Combination Nipple
C1ER26 RST-1005 C1ER25 RST-10 C1ER27 RST-15 C1DK32 RST-25 C1ER29 RST-20 C1ER31 RST-2520
Fluid Conveying
1.07
Short Shank Hose Barbs (Stainless Steel)

Construction: Machined from 316 stainless steel. Application: Low pressure fluid transfer, suction and discharge. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of hose barbs will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Short Shank Hose Barbs (Stainless Steel)
Catalog Part No. SSP Model O.A. Cut Hose I.D. Length Off Pipe Thread (in) (in) (in) 3/8 1/2 3/4 3/8-18 1/2-14 3/4-14 0.88 1.06 1.13 Wt. 0.09 0.15 0.20 Price Each
C1DF13 MHC-3/8 C1DE98 MHC-1/2X1/2 C1DF12 MHC-3/4X3/4
MHC Male Pipe
845

Shank Type Fittings Aluminum
Pin Lug Short Shank Couplings - Female Ends

Construction: Aluminum shank with brass swivel nut and rubber washer. Female NPSM threaded ends. Application: Low pressure liquid transfer, suction, and discharge. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of pin lug shank couplings will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Pin Lug Short Shank Couplings - Female Ends
Catalog Part No. Model Number Manufacturer Kuriyama Size 2 O.A. Cut Length Off (in) (in) Wt. 0.62 Price Each
C1FX72 ABF200
Female NPSM Fluid Conveying
Pin Lug Short Shank Couplings - Male Ends

Construction: Aluminum shank. Male NPSM threaded ends. Application: Low pressure liquid transfer, suction, and discharge. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of pin lug shank couplings will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380 Pin Lug Short Shank Couplings - Male Ends
Catalog Part No. Model Number Manufacturer Kuriyama Size 1-1/2 O.A. Cut Length Off (in) (in) Wt. 0.18 Price Each
C1FX77 ABM150
Male NPSM
846

Cam & Groove Couplers & Adapters Aluminum
Aluminum Cam & Groove Couplers & Adapters

Applications: Designed for use with liquids. Consult with us for specific recommendations. WARNING: UNDER NO CIRCUMSTANCES should Cam & Groove Couplings be used with compressed air or steam service. Operation: To Couple: Slide the adapter into the coupler and with normal hand pressure, press the cam levers down. To Uncouple: Lift the cam arms and remove the adapter from the coupler. Dixon Specifications: INTERCHANGEABILITY: Interchanges with all products produced to MIL-C-27487F. (No standard exists for 1/2 and 8 sizes. Generally these sizes do not interchange with other manufacturers). PRESSURE RATINGS: 1/2 150 PSI, 3/4 to 2 250 PSI, 2-1/2 150 PSI, 3 125 PSI, 4 100 PSI, 5 to 6 75 PSI. Note: Pressure ratings based on the use of mating Dixon fittings at 70F ambient temperature with standard Buna-N seals. For use at elevated temperatures contact us for assistance. Kuriyama Specifications: INTERCHANGEABILITY: All sizes except 5 inch and 8 inch are made to comply with MIL Spec 27487. Sizes 5 inch and 8 inch comply with ASTM specifications. PRESSURE RATINGS: 3/4" to 4" 150 PSI, 5" to 6" 75 PSI, 8" 50 PSI. IMPORTANT: The working pressure of cam & groove couplers will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. WARNING: Dust caps and dust plugs are NOT to be used in pressure applications for safety and environmental reasons. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Safety Pin Feature: Female couplers with this feature (see tables) have cast-in lugs that allow safety pins to be attached once the lugs are passed through slots in the special cam lever arms. These pins prevent the coupler from being uncoupled until they are removed. Reference: NAHAD Pressure Guideline Chart page 1380
Catalog Part No. Safety Gasket Clip Feature Material Yes Yes Yes Yes Yes Yes Yes Yes Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Price Each
Model Number
Mfg. Name Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama
Size 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Wt. 0.42 0.68 0.74 0.98 1.28 2.20 3.16 7.70
C1FY16 AL-C100 C1FY17 AL-C125 C1FY18 AL-C150 C1FY19 AL-C200 C1FY20 AL-C250 C1FY21 AL-C300 C1FY22 AL-C400
Part C Female Coupler / Hose Shank
C1FY23 AL-C600
847


Catalog Part No. Model Number Mfg. Name Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 Wt. 0.11 0.20 0.26 0.38 0.60 0.86 1.32 2.10 6.16 Price Each
C1FY54 AL-E075 C1FY55 AL-E100
Part E Male Adapter / Hose Shank
C1FY56 AL-E125 C1FY57 AL-E150 C1FY58 AL-E200 C1FY59 AL-E250 C1FY60 AL-E300 C1FY61 AL-E400 C1FY62 AL-E600
Catalog Part No.
Model Number
Mfg. Name Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama
Size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Wt. 0.13 0.12 0.20 0.28 0.38 0.58 0.70 1.34 2.00
Price Each
C1FX85 AL-A075 C1FX86 AL-A100
Part A Male Adapter / Female NPT
C1FX87 AL-A125 C1FX88 AL-A150 C1FX89 AL-A200 C1FX90 AL-A250 C1FX91 AL-A300 C1FX92 AL-A400 C1FX93 AL-A600
Fluid Conveying
Catalog Part No.
Model Number
Size 3/4 1 1-1/4 1-1/2 2 1-1/2 3 4 6
Wt. 0.16 0.20 0.34 0.46 0.68 0.96 1.30 2.32 3.92
Price Each
C1FY64 AL-F075
C1FY65 AL-F100 C1FY66 AL-F125
Part F Male Adapter / Male NPT
C1FY67 AL-F150 C1FY68 AL-F200 C1FY69 AL-F250 C1FY70 AL-F300 C1FY71 AL-F400 C1FY72 AL-F600
Catalog Part No.
Model Number
Size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Safety Clip Gasket Feature Material No Yes Yes Yes Yes Yes Yes Yes Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N
Wt. 0.24 0.36 0.62 0.70 0.86 1.02 1.56 2.42
Price Each
C1FX95 AL-B075 C1FX96 AL-B100 C1FX97 AL-B125 C1FX98 AL-B150 C1FX99 AL-B200 C1FY11 AL-B250 C1FY12 AL-B300 C1FY13 AL-B400
Part B Female Coupler / Male NPT
848

Catalog Part No.
Model Number
Size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Safety Clip Gasket Feature Material Yes Yes Yes Yes Yes Yes Yes Yes Yes Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N
Wt. 0.22 0.42 0.68 0.80 0.92
Price Each
C1FY25 AL-D075 C1FY26 AL-D100 C1FY27 AL-D125 C1FY28 AL-D150 C1FY29 AL-D200 C1FY30 AL-D250 C1FY31 AL-D300 C1FY32 AL-D400 C1FY33 AL-D600
Part D Female Coupler / Female NPT
1.18 1.80 2.82 5.11
Catalog Part No.
Model Number
Mfg. Name Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama
Size 3/4 1 1-1/2 2 3 4
Wt. 0.08 0.10 0.25 0.38 0.74 1.22
Price Each
C1FY45 AL-DP075 C1FY46 AL-DP100 C1FY48 AL-DP150 C1FY49 AL-DP200
Part DP Dust Plug
Fluid Conveying
C1FY51 AL-DP300 C1FY52 AL-DP400
Catalog Part No.
Model Number
Mfg. Name Dixon Dixon Dixon Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama Kuriyama
Size 2 3 4 3/4 1 1-1/2 2 3 4
Safety Clip Gasket Feature Material Yes Yes Yes Yes Yes Yes Yes Yes Yes Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N
Wt. 0.59 1.52 2.20 0.22 0.34 0.62 0.80 1.44 2.34
Price Each
C1EP42 AH-200 C1CH57 AH-300 C1CH58 AH-400 C1FY35 AL-DC075 C1FY36 AL-DC100 C1FY38 AL-DC150 C1FY39 AL-DC200 C1FY41 AL-DC300 C1FY42 AL-DC400
Part DC Dust Cap
Catalog Part No. C1FZ21
Model Number BUNA125
Size 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Material Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N
Wt. 0.01 0.02 0.02 0.02 0.03 0.04 0.07 0.12
Price Each
C1FZ20 BUNA100 C1FZ22 BUNA150 C1FZ23 BUNA200 C1FZ24 BUNA250 C1FZ25 BUNA300 C1FZ26 BUNA400 C1FZ28 BUNA600
Cam & Groove Gaskets
849

Cam & Groove Couplers & Adapters Polypropylene
Polypropylene Cam & Groove Couplers & Adapters

Construction: Glass-filled polypropylene body. Type 304 stainless steel handles. Applications: Designed for use with liquids. Contact us for specific recommendations. WARNING: UNDER NO CIRCUMSTANCES should Cam & Groove Couplings be used with compressed air or steam service. Operation: To Couple: Slide the adapter into the coupler and with normal hand pressure, press the cam levers down. To Uncouple: Lift the cam arms and remove the adapter from the coupler. Dixon Specifications: PRESSURE RATINGS: 1/2 to 1 125 PSI, 1-1/4 to 2 100 PSI, 3 75 PSI. Pressure ratings based on the use of mating Dixon fittings at 70F ambient temperature with standard EPR seals. For use at elevated temperatures contact us for assistance. Kuriyama Specifications: PRESSURE RATINGS: 1/2" to 2" 100 PSI @ 0F, 125 PSI @ 70F, 70 PSI @ 150F. 3" to 4" 75 PSI @ 70F. IMPORTANT: The working pressure of cam & groove couplers will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. WARNING: Dust caps and dust plugs are NOT to be used in pressure applications for safety and environmental reasons. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Safety Pin Feature: Female couplers with this feature (see tables) have lugs that allow safety pins to be attached once the lugs are passed through slots in the special cam lever arms. These pins prevent the coupler from being uncoupled until they are removed. Reference: NAHAD Pressure Guideline Chart page 1380 Note: Polypropylene not recommended for use with Teflon gaskets. Polypropylene cam & groove should not be mixed with aluminum cam & groove. Gaskets: Cam & Groove Gaskets page 849
Catalog Part No. Model Number Mfg. Name Kuriyama Size 2 Wt. 0.19 Price Each
Fluid Conveying
C1HC71 PPA200
Part A Male Adapter / Female NPT

Catalog Part No. Model Number Mfg. Name Kuriyama Size 2 Safety Clip Gasket Feature Material Yes EPDM Wt. 0.47 Price Each
C1HC73 PPB200
Part B Female Coupler / Male NPT
850

Cam & Groove Couplers & Adapters Polypropylene
Catalog Part No. Safety Clip Gasket Feature Material Yes EPDM Price Each
Model Number
Mfg. Name Kuriyama
Size 2
Wt. 0.22
C1DH32 PPD200
Part D Female Coupler / Female NPT
851

Universal Fittings
Universal Air Hose Couplings

Application: For air and water service only. Working Pressure: Rated to 150 PSI at 70F ambient temperature. Operating Temperature Range: -20F to 160F with standard rubber washer. Note: The use of a safety clip or wire type retainer is necessary to assure Universal Couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as pin will not go through holes in mating flanges until couplings are locked in place. Note: Constant vibration created by air drills, pavement breakers etc. is destructive to air hose couplings, especially this quick-acting type. A 3 to 10 foot whip hose is recommended, with the hose end that attaches to the tool being a heat-treated steel hose barb. The other end of the whip hose may use the Universal coupling. Warning: Never use any Universal coupling for steam service. Note: Fitting attachment suggestions are listed for each hose in the Hose section of this catalog. Note: The working pressure of Universal fittings will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. Reference: NAHAD Pressure Guideline Chart page 1380
Catalog Part No. Model Number Mfg. Name Size Kuriyama Kuriyama Kuriyama 1/2 3/4 1 Material Cast Steel Cast Steel Cast Steel Gasket Material Rubber Rubber Rubber Wt. 0.49 0.55 0.67 Price Each
C1JN92 HE-50
Fluid Conveying
C1FZ83 HE-75 C1JN91 HE-100
Note: Safety clip & safety cable is included.
Hose End
Catalog Part No. C1JS30 Model Number FHE-75 Mfg. Name Kuriyama Size 3/4 Hose O.D. Range (in) 1-4/64 to 1-22/64 Material Investment cast steel with carbon steel ferrule Wt. 0.58 Price Each
Note: Safety clip is included.
Crimp/Swage Hose End

Catalog Part No. Gasket Material Rubber Rubber Rubber Price Each
Model Number Mfg. Name Size Kuriyama Kuriyama Kuriyama 1/2 3/4 1
Material Cast Steel Cast Steel Cast Steel
Wt. 0.50 0.58 0.52
C1JN85 FE-50
C1JN86 FE-75 C1JN84 FE-100
Female NPT End
852

Universal Fittings
Catalog Part No. C1JP40 C1JP39 Gasket Material Rubber Rubber Price Each
Model Number Mfg. Name Size ME-75 ME-100 Kuriyama Kuriyama 3/4 1
Material Cast Steel Cast Steel
Wt. 0.56 0.65
Male NPT End Pneumatic Power & Control

Catalog Part No. Model Number Mfg. Name Kuriyama Material Rubber Wt. 0.01 Price Each
C1JN36 AHG-75
Replacement Washer (Fits All Sizes)
853
Hose Clamps & Crimp Ferrules

Hydraulic Power & Control Category Page 855 856 859 861 864 865 865 866 866 867 Hose Clamps Worm Gear Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pinch Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T-Bolt Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spring Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preformed Band Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Band & Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Center Punch Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Double Bolt Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spiral Double Bolt Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Ferrules Brass Crimp Ferrules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Conveying
854
Hose Clamps
HSS Worm Gear Clamps

Material: SAE 300 series stainless steel band and housing with SAE 410 series stainless steel screw. Tightening Method: Combination 5/16 hexagon and screwdriver slot. Max. Recommended Torque: 30 in. lbs. HSS Worm Gear Clamps
Catalog Part No. C1CY82 HSS6 C1CY84 HSS8 C1CY70 HSS10 C1CY71 HSS12 C1CY72 HSS16 C1CY73 HSS20 C1CY74 HSS24 C1CY75 HSS28 C1CY76 HSS32 C1CY77 HSS36 C1CY78 HSS40 C1CY79 HSS44 C1CY81 HSS56 C1CY83 HSS72 Dixon Model Band Width (in) 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 Minimum Dia. (in) 0.4375 0.50 0.5625 0.6875 0.8125 0.8125 1.0625 1.3125 1.5625 1.8125 2.0625 2.3125 3.0625 1.875 Maximum Dia (in) 0.78125 0.90625 1.0625 1.25 1.50 1.75 2.0 2.25 2.5 2.75 3 3.25 4 5 Wt. 0.04 0.05 0.04 0.04 0.04 0.05 0.02 0.05 0.60 0.06 0.06 0.07 Price Each
HSS
Fluid Conveying
0.08 0.09
MAH Worm Gear Clamps

Miscellaneous Products Material: SAE 300 series stainless steel band and housing with SAE 410 series stainless steel screw. Tightening Method: Combination 1/4 hexagon and screwdriver slot. Max. Recommended Torque: 10 in. lbs. MAH Worm Gear Clamps
Catalog Part No. C1DD76 C1DD77 MAH-4 MAH-6 Dixon Model Band Width (in) 0.3125 0.3125 0.3125 Minimum Dia. (in) 0.21875 0.4375 0.5625 Maximum Dia (in) 0.63 0.78125 1.0625 Wt. 0.15 0.17 0.01 Price Each
C1DD75 MAH-10
MAH
855
Hose Clamps
Oetiker 2-Ear Pinch Clamps

Application: Especially suited for industrial use and with heavy vibrating equipment. These clamps are installed on air, fluid, gas and steam lines. The one piece design offers a positive, tamper-proof seal without damaging the hose. Installation: While both ears must be closed, 2-Ear clamps are best installed when one ear is closed all the way first. The second ear is then closed so that the first ear opens slightly (gap to be approximately 1/16 inch). This builds a resilient strength into the clamp in a spring-like action to hold against pressure, vibration and hose shrinkage due to temperature changes or aging. (If both ears can be closed all the way, the clamp size selected is probably too big and the next smaller clamp should be used). Note: To insure a proper grip, Oetiker clamps should be installed with either Oetiker Pincers or a similar style of pincer approved by Oetiker, Inc. Clamp Installation Tools: page 858 Kits: page 857 Oetiker 2-Ear Pinch Clamps
Nominal Clamping Range Nom. Band Size Closed-Open Width (in) (in) (in) 5/16 3/8 1/2 9/16 5/8 3/4 7/8 1 5/16 3/8 1/2 9/16 5/8 3/4 7/8 1 0.276 - 0.354 0.276 0.315 - 0.433 0.276 0.433 - 0.512 0.276 0.512 - 0.592 0.295 0.591 - 0.708 0.315 0.669 - 0.787 0.335 0.787 - 0.905 0.354 0.905 - 1.063 0.394 0.276 - 0.354 0.276 0.315 - 0.433 0.276 0.433 - 0.512 0.276 0.512 - 0.592 0.295 0.591 - 0.708 0.315 0.669 - 0.787 0.335 0.787 - 0.905 0.354 0.905 - 1.063 0.394
Catalog Part No.
Oetiker Model
Material Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Zinc Plated Steel Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless Stainless
Wt. 0.02 0.03 0.01 0.02 0.06 0.01 0.05 0.04 0.03 0.03 0.04 0.05 0.06 0.07 0.11 0.14 0.17 0.17
Price Each
C1ZZ59 10100008
Fluid Conveying
C1ZZ58 10100011 C1ZZ57 10100016 C1ZZ56 10100019 C1ZZ55 10100024 C1ZZ54 10100027 C1ZZ53 10100030 C1ZZ52 10100032 C1ZZ51 10100034 C1ES45 15100004 C1ES53 15100023 C1ES46 15100006 C1ES47 15100007 C1ES48 15100009 C1ES49 15100010 C1ES50 15100012 C1ES51 15100013 C1ES52 15100014
2-Ear Clamps
15/16 0.866 - 0.984 0.394
15/16 0.866 - 0.984 0.394
856
Hose Clamps
Oetiker 2-Ear Pinch Clamp Service Kits
Oetiker 2-Ear Pinch Clamp Service Kits

Catalog Part No. Oetiker Model Description Stainless Steel Clamp Service Kit with Straight Jaw Pincers Clamps: 15 each of 5/16, 3/8, 1/2, 9/16, and 5/8. 12 each of 3/4, 7/8, 15/16, 1. Wt. 2.73 Price Each
C1ZZ21 18500064
Oetiker Stepless Ear Pinch Clamps

Application: For low durometer and/or thin-walled hose and tubing. Well suited for silicon, vinyl and polyurethane lines. The smooth inner band prevents damage to the hose while the unique tongue-in-groove design provides a complete 360 seal. Installation: 1-Ear clamps are best installed when the clamp shows a gap of approximately 1/16 inch. This builds a resilient strength into the clamp in a spring-like action to hold against pressure, vibration and hose shrinkage due to temperature changes or aging. (If a clamp ear can be closed all the way, the clamp size selected is probably too big and the next smaller clamp should be used). Note: To insure a proper grip, Oetiker clamps should be installed with either Oetiker Pincers or a similar style of pincer approved by Oetiker, Inc. Clamp Installation Tools: page 858 Kits: page 858 Oetiker Stepless Ear Pinch Clamps
Nominal Clamping Nom. Range Band Size Size Closed-Open Width (mm) (in) (in) (in) 13.3 14.5 15.7 1/2 9/16 5/8 0.425 - 0.524 0.472 - 0.571 0.520 - 0.618 0.276 0.276 0.276 0.276 0.276 0.276 0.276 0.276
Catalog Part No.
Oetiker Model
Material Stainless Stainless Stainless
Wt. 0.05 0.05 0.05 0.01 0.07 0.08 0.08
Price Each
C1ES57 16700010 C1ES58 16700013 C1ES59 16700016 C1FG42 16701009 C1ES60 16700020
Stainless 17.0 11/16 0.571 - 0.669 (Degreased) Stainless Stainless Stainless Stainless 18.5 23/32 0.602 - 0.728 22.6 25.6 28.6 7/8 1 1-1/8 0.764 - 0.890 0.882 - 1.008 1.004 - 1.126
Stepless Ear Clamps
C1ES61 16700026 C1ES62 16700031 C1ES63 16700035
0.09
857
Hose Clamps
Oetiker Stepless Ear Pinch Clamp Service Kits
Oetiker Stepless Ear Pinch Clamp Service Kits

Catalog Part No. Oetiker Model Description Stainless Steel Assortment Kit with Straight Jaw Pincers Clamps: 10 each of 1/2, 9/16, 5/8, 23/32, 7/8, 1-1/8, 1-1/4. Pincers: 1 pair. Wt. 2.23 Price Each
C1ZZ22 18500060
Fluid Conveying
Oetiker Ear Pinch Clamp Installation Tools

1-Ear Clamp Installation: 1-Ear clamps are best installed when the clamp shows a gap of approximately 1/16 inch. This builds a resilient strength into the clamp in a spring-like action to hold against pressure, vibration and hose shrinkage due to temperature changes or aging. (If a clamp ear can be closed all the way, the clamp size selected is probably too big and the next smaller clamp should be used). 2-Ear Clamp Installation: While both ears must be closed, 2-Ear clamps are best installed when one ear is closed all the way first. The second ear is then closed so that the first ear opens slightly (gap to be approximately 1/16 inch). This builds a resilient strength into the clamp in a spring-like action to hold against pressure, vibration and hose shrinkage due to temperature changes or aging. (If both ears can be closed all the way, the clamp size selected is probably too big and the next smaller clamp should be used). Oetiker Ear Pinch Clamp Installation Tools
Catalog Part No. Oetiker Model Description Straight Jaw Pincers Side Jaw Pincers (For use in confined areas with pincers held parallel to the hose) Wt. 0.72 0.76 Price Each
C1ZZ27 14100118 C1ZZ28 14100083
858
Hose Clamps
Dixon TBC T-Bolt Band Clamps (Stainless Band, Carbon Steel Bolt & Nut)
Material: 301 stainless steel band (.025 thick) and carbon steel bolt with self-locking nut. Tightening Method: Hexagon T-bolt. Max. Recommended Torque: 70 in. lbs. Dixon TBC T-Bolt Band Clamps (Stainless Band, Carbon Steel Bolt & Nut)
Catalog Part No. C1DL89 C1DL90 C1DL91 C1DL92 C1DL93 C1DL94 Dixon Model TBC150 TBC175 TBC188 TBC200 TBC225 TBC238 TBC250 TBC256 TBC275 TBC288 TBC300 TBC325 TBC350 TBC375 Band Width (in) 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 Minimum Dia. (in) 1.1875 1.28125 1.53125 1.65625 1.78125 2.03125 2.15625 2.28125 2.34375 2.40625 2.53125 2.65625 2.78125 2.90625 3.03125 3.28125 3.53125 3.78125 4.03125 4.28125 4.53125 4.78125 5.28125 Maximum Dia (in) 1.4375 1.59375 1.84375 1.96875 2.09375 2.34375 2.46875 2.59375 2.65625 2.71875 2.84375 2.96875 3.09375 3.21875 3.34375 3.59375 3.84375 4.09375 4.34375 4.59375 4.84375 5.0625 5.59375 Wt. 0.12 0.12 0.12 0.12 0.12 0.13 0.13 0.14 0.14 0.14 0.15 0.14 0.15 0.07 0.15 0.16 0.16 0.18 0.07 0.17 0.75 0.18 0.20 Price Each
C1GM46 TBC131
TBC
C1DL95 C1DL96 C1DL98 C1DL99 C1DM11 C1DM13 C1DM14 C1DM15
C1DL97 TBC263
Fluid Conveying
C1DM12 TBC312
C1DM16 TBC400 C1DM17 TBC425 C1DM18 TBC450 C1DM19 TBC475 C1GG99 TBC500 C1DM20 TBC550
Note: 700-* models are made by R.G. Ray.
859
Hose Clamps
Trident Marine All Stainless Steel T-Bolt Clamps

Features: 3/4 inch wide 316 stainless steel band. 18-8 stainless steel T-bolt and lock nut (with nylon insert). Very strong and secure for critical applications. Rounded band edges protect soft rubber or silicone hose materials. T-Bolt clamps provide greater clamping tension than worm gear clamps with less installation torque. Wide band prevents hose extrusions. Trident Marine All Stainless Steel T-Bolt Clamps
Catalog Trident Use With Hose I.D.'s Part No. Marine Model (in) Effective Hose O.D. Range (in) 1.28 - 1.59 1.53 - 1.84 1.78 - 2.09 2.03 - 2.34 2.28 - 2.59 2.53 - 2.84 2.75 - 3.625 3.03 - 3.34 3.28 - 3.59 3.37 - 3.94 3.87 - 4.44 4.28 - 4.59 4.37 - 4.94 5.37 - 5.94 6.30 - 6.74 6.53 - 7.10 8.30 - 8.87 10.25 - 10.69 Wt. 0.12 0.13 0.14 0.14 0.14 0.15 0.19 0.16 0.16 0.17 0.18 0.18 0.19 0.20 0.21 0.22 0.25 0.27 Price Each
C1FT80 720-1000 C1FT83 720-1140 C1FT82 720-1120 C1FT84 720-1340 C1FT85 720-2000 C1FT87 720-2140 C1FT86 720-2120 C1FT88 720-2340 C1FT89 720-3000 C1FT90 720-3000L C1FT91 720-3120L C1FT92 720-4000
1 1-1/8 to 1-1/4 1-3/8 to 1-1/2 1-5/8 to 1-3/4 1-7/8 to 2 2-1/8 to 2-1/4 2-3/8 to 2-1/2 2-5/8 to 2-3/4 2-7/8 to 3-1/4 2-7/8 to 3-1/4 3-1/2 4 4 5 6 6 8 10
Fluid Conveying
C1FT93 720-4000L C1FT95 720-5000L C1FT96 720-6000 C1FT97 720-6000L C1FT98 720-8000 C1FT81 720-10000
Note: Verify hose O.D. before selecting clamp.
860
Hose Clamps
Oetiker Stepless Spring Clamps for Thermal Cycle Applications
Features: Used on radiators, thermostat to water pump or engine blocks, water pump to oil coolers, heater hose, etc. Self-tightening, light weight, adjustable and reusable. Tongue-in-groove design provides complete 360 seal around the hose. Spring automatically reacts to thermal expansion, contraction and vibration. Low installation torque requirement minimizes stress and damage to delicate silicone hoses. All 300 AISI series stainless steel construction. Advantages: Prevents Cold Water Leak by continually adjusting to compensate for hose expansion and contraction. Installation: (1) Open screw until it stops at the D-Nut. (2) Unhook Range Control Latch from the Tabs and place clamp over the hose. (3) Make sure Tongue is in Groove. Engage ALL Tabs in Windows to the tightest position, At this time the should be very little or no play between the clamp and hose. (4) Tighten screw until the spring is fully compressed, the tighten 3 more full revolutions. At this time there should be a small 1/8 inch or larger gap between the two D-Nuts for proper installation and torque. Removal: Open screw, do not disengage from D-Nut. Lift Range Control Latch. Oetiker Stepless Spring Clamps for Thermal Cycle Applications
Catalog Part No. Oetiker Model Nominal Band Clamping Range Spring Color / Torque Width (in.lbs) Closed-Open (in) (in) 1.1875 - 1.4375 1.6875 - 1.9375 2.00 - 2.375 2.375 - 2.75 2.75 - 3.125 2.9375 - 3.3125 3.125 - 3.50 3.5625 - 3.9375 Green 12-18 in.lbs Green 12-18 in.lbs Green 12-18 in.lbs Green 12-18 in.lbs Green 12-18 in.lbs Green 12-18 in.lbs Green 12-18 in.lbs Green 12-18 in.lbs 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 Wt. 0.04 0.05 0.06 0.06 0.06 0.06 0.06 0.07 Price Each
C1ZU35 17800175 C1ZU33 17800178 C1ZU32 17800180 C1ZU30 17800182 C1ZU28 17800184 C1EW20 17800185 C1ZU27 17800186
Stepless Spring Clamps
C1ZU26 17800188
861
Hose Clamps
Light Duty T-Bolt Spring Clamps

Clampco spring-loaded clamps are designed to compensate for fluctuations in all types of hose line assemblies. When temperature and/or pressure changes cause hose lines to expand or contract, Clampco spring-loaded clamps adjust accordingly to provide constant band tension. Band tension (not installation torque) is what ultimately produces desired clamping force. Features: 300 series stainless steel bands and trunnions for high strength and corrosion resistance Solid bands prevent hose extrusion Rounded band edges protect soft hose materials Low installation torque results in high band tension. Construction: 300 series stainless steel bands, floating bridges and trunnions. Zinc-plated t-bolts, nuts and springs. Spring Rate: 1900 pounds per inch, capable of generating a load of 300 pounds. Recommended Installation Torque: 60 inch pounds. How to Order : Measure the outside diameter (O.D.) of your hose. Select the clamp with the closest nominal diameter. Light Duty T-Bolt Spring Clamps
Catalog Part No. Clampco Model C1FK33 C1JC62 94143-0450 94143-0550 Band Width (in) 0.75 0.75 Nominal Dia. (in) 4.50 5.50 Minimum Maximum Dia. (in) Dia (in) 4.28 5.28 4.58 5.58 Wt. 0.22 0.22 Price Each
Fluid Conveying
862
Hose Clamps
Trident Marine All Stainless Steel Constant-Torque Clamps

Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80% of installation torque. Similarly, all metal connections expand as a system heats up, and then contracts as the system cools. Conventional worm gear, T-bolt and other clamps are passive, in that expansion or contraction of components cannot be compensated for without retightening or loosening the clamps. This clamping system is an "active" clamping mechanism, which compensates for the changes by actually changing diameter through a unique wormgear Belleville assembly. Features: Compensates for "cold flow" and expansion/contraction due to extremes of heat and cold. 5/8 inch wide 304 stainless steel band. 304 stainless steel housing. 410 stainless steel Belleville spring washers and screw. Internal liner helps protect soft or silicone hose from damage, extrusion and shear. Extended adjustment range (7/8 inch O.D.). Use for sealed systems and hard-to-reach installations. Visual "Torque Check" feature. Installation: A Constant-Torque clamp is properly tightened when the screw tip is fully extended beyond the housing (approximately 1/4 inch), and the Belleville washer stacks are nearly collapsed flat. The use of a torque wrench is recommended to reach the 90-125 inch pound installation torque. Trident Marine All Stainless Steel Constant-Torque Clamps
Catalog Trident Use With Hose I.D.'s Part No. Marine Model (in) C1FU12 730-0340 C1FU13 730-1000 C1FU16 730-1140 C1FU15 730-1120 C1FU17 730-2000 C1FU18 730-2120 C1FU19 730-3120 C1FU20 730-4000 C1FU21 730-5000 C1FU22 730-6000 C1FU23 730-8000 3/8 to 7/8 1 to 1-1/8 1 to 1-1/2 1-1/4 to 2 1-7/8 to 2-1/2 2-3/8 to 3 3-1/4 to 3-1/2 4 5 to 5-1/8 6 8 Effective Hose O.D. Range (in) 0.6875 - 1.25 1.00 - 1.75 1.25 - 2.125 1.75 - 2.625 2.25 - 3.125 2.75 - 3.625 3.75 - 4.625 4.25 - 5.125 5.25 - 6.125 6.25 - 7.125 8.25 - 9.125 Wt. 0.11 0.18 0.19 Price Each
0.21 0.22 0.22 0.24 0.25 0.26 0.28 0.30
863
Hose Clamps
BAND-IT Jr. Preformed Band Clamps

Standard Clamps (J Types): Strong holding power. Vibration resistant. Require no hammering or crimping. Automatically locked in one simple lever movement. Smooth I.D. Clamps (JS Types): Uniform, gap-free inside diameter. The smooth inside diameter produces a uniform clamping surface to prevent leak paths, while the lower profile reduces the risk of snags when dragging industrial hose assemblies. Same strong holding power and features of Standard clamps. BAND-IT Jr. Preformed Band Clamps
Band Band Width Thickness (in) (in) 0.625 0.75 0.75 0.75 0.75 0.75 0.25 0.375 0.25 0.50 0.375 0.25 0.625 0.625 0.625 0.625 0.625 0.75 0.75 0.75 0.030 0.030 0.030 0.030 0.030 0.030 0.020 0.025 0.020 0.030 0.025 0.020 0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.030
Catalog Band-It Part No. Model C1HG41 JS309 C1FZ92 JS310 C1FZ94 JS312 C1FZ95 JS314 C1FZ96 JS315 C1HG42 JS317 C1DB62 JS240 C1GC15 JS201 C1DB63 JS242 C1GC17 JS203 C1GC16 JS202 C1DB64 JS252 C1GC18 JS205 C1GC19 JS206 C1GC20 JS207 C1GC21 JS208 C1GC22 JS209 C1GC23 JS212 C1GC24 JS213 C1FH61 JS215
Type JS JS JS JS JS JS JS JS JS JS JS JS JS JS JS JS JS JS JS JS
Clamp I.D. (in) 2.50 2.75 3.50 4.50 5.00 6.50 0.75 0.8125 1.00 1.00 1.375 1.50 1.50 1.75 2.00 2.25 2.50 3.50 4.00 5.00
Material Galv Steel Galv Steel Galv Steel Galv Steel Galv Steel Galv Steel 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS 201 SS
Wt. 0.14 0.18 0.21 0.25 0.27 0.33 0.02 0.03 0.01 0.06 0.04 0.10 0.10 0.11 0.11 0.13 0.14 0.20 0.23 0.26
Price Each
Fluid Conveying
Note: J Types (Band-It Standard), JS Types (Band-It Smooth ID).
864
Hose Clamps
BAND-IT Band
Features: Superior yield and tensile strength to provide maximum clamping strength. Fully rounded smooth edges for safety and easy installation. Material: Type 201 stainless steel. For Use With: Band-It Buckles. BAND-IT Band
Catalog Part No. Band Band Width Thickness (in) Band-It Model (in) 0.625 0.030 Package Quantity (ft) 100 Wt. Price (per pkg) (per pkg) 7.00
C1EH76 C205
BAND-IT Buckles
Features: Designed to accommodate both single and double wrap clamps. Unique teeth and ears provide for maximum clamping strength. For Use With: Band-It Band. Tightening Method: Band-It Tool. BAND-IT Buckles
Catalog Part No. Band-It Model Band Width (in) 0.625 Material 201 SS Wt. 0.02 Price Each
Fluid Conveying
C1CM28 C255
Dixon F Series Center Punch Clamps

For use with Dixon center punch tools F1, F38, F40 and F100. Other manufacturer's punch style tools may be used. On stainless models, band is 300 series stainless steel, buckle is 302 series stainless steel.
Dixon F Series Center Punch Clamps

Catalog Part No. C1JE39 Dixon Model F14 Clamp I.D. (in) 3-1/2 Material Galvanized Band Band Width Thickness (in) (in) 5/8 0.031 Wt. 0.15 Price Each
865
Hose Clamps
Double Bolt Clamps

Material: Malleable iron. Machine bolts and hex nuts. Features: Inner surface has dual gripping ridges. Bolt lugs are reinforced to prevent bending out of alignment. Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely affect clamp performance. NOT recommended for use with helical wire hose. Tightening Method: Bolts and nuts. Double Bolt Clamps
Bolt Torque Rating Foot Pounds 40
Catalog Part No.
Dixon Model
Saddles 2
Min. Dia. (in) 3.5
Max. Dia. (in) 3.8125
Wt. 1.62
Price Each
C1BN59 400-DIXON
Fluid Conveying
TigerClamp Spiral Double Bolt Clamps

Application: For use on Tigerflex hoses with convoluted cover (counter-clockwise spiral only). For adequate holding power, a single clamp may be used on each end for 1-1/2 to 4 inch ID hose. Two clamps are recommended for each end on 5 inch ID and larger. Threaded protective caps help prevent injury. Hose Styles: TigerClamp Spiral Double Bolt Clamps are recommended for use on the following Tigerflex convoluted hoses: Series 2001, 2020, BW, CG, F, G, GC, GC-C, H, J, JG, K, PF, S, UBK, W, WBS, WE, WG, WH, WST, WSTF, WT, WU. Also recommended for use on Ureflex-1, Ureflex-2, Urevac-3. Note: Use of pneumatic air tools for tightening purposes is NOT recommended due to potential clamp damage caused by excess torque. Both hex nuts should be tightened equally to prevent possible leakage. If sockets are used, they should be deep well sockets. CAUTION: Proper evaluation of holding power for clamp must be determined for each individual installation. TigerClamp Spiral Double Bolt Clamps
Catalog Part No. C1GC67 Kuriyama Model SDBC-6 Description TigerClamp for 6 Inch I.D. Tigerflex Convoluted Hose Wt. 2.00 Price Each
866
Crimp Ferrules
Hydraulic Power & Control Material: Brass. Application: Used to permanently attach a shank type hose barb fitting to a hose. For use in low pressure applications. Fitting Suggestions: Short shank type brass hose barbs. Fittings: page 839
Catalog I.D. Part No. Winzeler Model (in) C1BS22 501 C1BZ36 7323 C1BZ37 7325 C1BZ38 7327 C1BZ39 7328 C1BZ40 7329 C1BZ42 7330 C1BZ43 7331 C1BZ44 7333 C1BZ23 7244 C1BS27 5029 C1BY66 7113 C1BY67 7114 C1BY65 7104 C1CA52 875/K 0.500 0.525 0.562 0.63 0.656 0.687 0.718 0.75 0.812 0.88 0.9 0.925 1.025 1.15 1.225 Center Hole Length Dia. Gauge 0.687 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.875 0.875 0.875 0.875 0.875 0.875 0.328 0.375 0.437 0.437 0.437 0.50 0.50 0.50 0.625 0.625 0.625 0.69 0.75 0.875 0.875 0.016 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.025 0.023 0.025 0.025 0.025 Maximum Hose Barb Size 1/4 5/16 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 Price Each
Wt. 0.10 0.01 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.03
867
Tubing Products
Hydraulic Power & Control Category Page Tubing Carbon Steel Tubing (Inch Sizes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869 Carbon Steel Tubing (Metric Sizes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870 Stainless Steel Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871 Polyethylene Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 872 Air Brake Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873 PVC Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874 Steel Brake Line Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 876 Steel Tube Fittings Flare & Inverted Flare Nuts, Flare Sleeves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878 Aeroquip Versil Flare Nuts & Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 879 Aeroquip ORS-TF Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 881 Braze Type Tube Fittings - ORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 882 Eaton 7000 Series Ermeto Flareless Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 883 World Wide Flareless Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 884 Metric Flareless Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 886 Stainless Steel Tube Fittings SSP Flare Nuts & Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 894 SSP Duolok Flareless Tube Fittings (Swagelok Interchange). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 895 Adaptall Metric Flareless Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 901 Brass Tube Fittings Flare & Inverted Flare Nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 902 Eaton Compression Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 903 Eaton Compression Fittings (Air Brake) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 909 SSP Duolok Flareless Tube Fittings (Swagelok Interchange). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 911 Eaton Push > Connect Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 913 Alkon Push-In Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 917 Eaton Push > Connect Tube Fittings (Metric) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 922 Eaton Quick > Connect Air Brake Tube Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 924 Tubing Accessories Aeroquip Flaretite Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 927 Technical Information SSP Duolok Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1159 Eaton 7000 Series Ermeto Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1165
Fluid Conveying
868
Tubing
Carbon Steel Tubing

Tubing Material Specification: SAE J524 (seamless low carbon steel tubing annealed for bending & flaring). Tensile strength 55,000 psi. Pressure Ratings: Based on SAE Specification J1065 and using the more conservative Barlow formula where P=(2TxS)/O (P=burst pressure T=wall thickness S=tensile strength O=outside diameter). Note: A 6:1 safety factor is used in table below for applications where considerable hydraulic shock and mechanical strain are present. For applications where hydraulic shock and mechanical strain is not considerable, a 4:1 safety factor (higher working pressures) may be carefully considered. For applications where hydraulic shock and mechanical strain is severe, an 8:1 safety factor (lower working pressures) should be applied. Note: Tubing design pressures have not been de-rated for elevated operating temperatures. Contact us for application information regarding elevated temperatures. Note: Tubing is stocked in 20 foot nominal lengths. Flare Nuts & Sleeves: Flare Nuts & Sleeves (Steel) page 878 Flare Nuts & Sleeves (Stainless Steel) page 894 Flare Adapters: page 940 Versil Flare Flareless Nuts & Ferrules: Versil Flare page 879 Flareless Tube Fittings: Steel 7000 Series Ermeto page 883 Flareless (Steel) page 884 Tubing Support Clamps: page 1101 Application: Please review important safety & application information starting on page 1365 Carbon Steel Tubing
Catalog Part No. C1AF27 Model Number 1/4.035 Wall Thickness O.D. (in) (in) I.D. (in) 0.1875 0.25 0.25 0.3125 0.3125 0.375 0.375 0.50 0.50 0.50 0.63 0.63 0.75 0.75 0.75 0.75 1.0 1.0 1.25 1.25 0.035 0.035 0.049 0.049 0.065 0.049 0.065 0.049 0.065 0.083 0.065 0.095 0.049 0.065 0.095 0.109 0.065 0.12 0.095 0.12 0.1175 0.18 0.152 0.215 0.1825 0.277 0.245 0.402 0.37 0.334 0.495 0.435 0.652 0.62 0.56 0.532 0.87 0.76 1.06 1.01 Inside Area (sq.in.) 0.01084 0.02543 0.01814 0.03612 0.02615 0.06023 0.04712 0.12686 0.10747 0.08757 0.19234 0.14854 0.33371 0.30175 0.24618 0.22217 0.59417 0.45342 0.88203 0.80078 Flow Rate @ 15FPS (gpm) 0.40 0.90 0.80 1.70 1.30 2.80 2.60 6 4.9 4 9 6.9 15.4 12 11 10.6 28.1 20.7 41.0 36.7 Maximum Working Burst Pressure 6:1 Safety Pressure Factor (psi) (psi) 3422 2567 3593 2875 3813 2396 3178 1797 2383 3043 1907 2787 1198 1589 2322 2664 1192 2200 1393 1760 20533 15400 21560 17248 22880 14373 19067 10780 14300 18260 11440 16720 7187 9533 13933 15987 7150 13200 8360 10560 Wt. (per ft) 0.06 0.08 0.11 0.14 Price (per ft)
C1BK42 3/16.035 C1AF29 1/4.049 C1BR53 5/16.049 C1BR55 5/16.065 C1BK88 C1AE75 3/8.049 1/2.049 C1BK90 3/8.065 C1AE77 1/2.065 C1AE79 1/2.083 C1BR56 5/8.065 C1BR57 5/8.095 C1BK53 3/4.049 C1BK54 3/4.065 C1BK56 3/4.095 C1BK58 3/4.109 C1AE64 1.065 C1AE66 1.120 C1EL47 1-1/4.095 C1AE34 1-1/4.120
0.17 0.17 0.22 0.24 0.30 0.37 0.39 0.54 0.37 0.48 0.67 0.75 0.65 1.13 1.17 1.45
869
Tubing
Carbon Steel Tubing (Metric)

Tubing Material Specifications: Seamless low carbon steel tubing annealed for bending & flaring. Tensile strength 32-45 Kp/mm. Note: A 6:1 safety factor is used in table below for applications where considerable hydraulic shock and mechanical strain are present. For applications where hydraulic shock and mechanical strain is not considerable, a 4:1 safety factor (higher working pressures) may be carefully considered. For applications where hydraulic shock and mechanical strain is severe, an 8:1 safety factor (lower working pressures) should be applied. Note: Tubing design pressures have not been de-rated for elevated operating temperatures. Contact us for application information regarding elevated temperatures. Note: Tubing is stocked in 6 meter (20 foot) nominal lengths. Flareless Metric Tube Fittings: Flareless Metric (Steel) page 886 Tubing Support Clamps: page 1101 Application: Please review important safety & application information starting on page 1365 Carbon Steel Tubing (Metric)
Catalog Part No. Voss Model O.D. (mm) 6 8 10 12 12 15 16 18 20 22 Wall Inside Thickness Area I.D. (mm) (sq.in.) (mm) 1.0 1.50 1.50 1.0 2 1.50 2.5 2.5 3 3 4 5 7 10 8 12 11 13 14 16 0.02015 0.031 0.0589 0.12245 0.0775 0.17515 0.14725 0.20615 0.2387 0.31155 Flow Rate @ 15FPS (gpm) 1.10 1.60 2.70 5.8 3.4 8.19 6.8 9.1 10.7 12.1 Maximum Working Burst Pressure 6:1 Safety Pressure Factor (psi) (psi) 3051 3440 2748 1525 3051 1829 2862 2550 2749 2502 18306 20640 16488 9150 18306 10977 17172 15300 16494 15012 Wt. (per ft) 0.08 0.16 0.21 0.18 0.33 0.33 0.56 0.64 0.85 0.95 Price (per ft)
C1BN44 400-101
Fluid Conveying
C1BN45 400-161 C1BN46 400-211 C1BN47 400-251 C1BN48 400-271 C1ZT91 400-361 C1BN49 400-431 C1BN51 400-481 C1BN53 400-531 C1BN54 400-581
Note: Kilograms per Square Centimeter x 14.22 = Pounds per Square Inch
870
Tubing
Stainless Steel Tubing

Tubing Material Specifications: ASTM A269 B90 Seamless. Bright Annealed 316 Stainless Steel. Tensile strength 75,000 psi. Pressure Ratings: Based on using the more conservative Barlow formula where P=(2TxS)/O (P=burst pressure T=wall thickness S=tensile strength O=outside diameter). Note: A 6:1 safety factor is used in table below for applications where considerable hydraulic shock and mechanical strain are present. For applications where hydraulic shock and mechanical strain is not excessive, a 4:1 safety factor (higher working pressures) may be carefully considered. For applications where hydraulic shock and mechanical strain is severe a 8:1 safety factor (lower working pressures) should be applied. Note: Tubing design pressures have not been de-rated for elevated operating temperatures. Contact us for application information regarding elevated temperatures. Note: Tubing is stocked in 20 foot nominal lengths. Flare Nuts & Sleeves: Flare Nuts & Sleeves (Stainless Steel) page 894 Flare Nuts & Sleeves (Steel) page 878 Flare Adapters: page 940 Flareless Tube Fittings: Flareless (Steel) page 884 SSP Duolok (Stainless Steel) page 895 Tubing Support Clamps: page 1101 Application: Please review important safety & application information starting on page 1365 Stainless Steel Tubing
Wall Thickness O.D. (in) (in) I.D. (in) 0.1875 0.25 0.25 0.3125 0.375 0.375 0.50 0.50 0.5625 0.75 0.75 1.0 1.25 0.035 0.035 0.049 0.049 0.035 0.049 0.049 0.065 0.065 0.065 0.095 0.109 0.12 0.1175 0.18 0.152 0.2145 0.305 0.277 0.402 0.37 0.4325 0.62 0.56 0.788 1.01 Inside Area (sq.in.) 0.01084 0.02543 0.01814 0.03612 0.07306 0.06023 0.12686 0.10747 0.19234 0.30175 0.24618 0.48005 0.80078 Flow Rate @ 15FPS (gpm) 0.40 0.90 0.70 1.70 3.4 2.80 6 4.9 9 12 11.1 22 36.7 Maximum Working Burst Pressure 6:1 Safety Pressure Factor (psi) (psi) 4667 3500 4900 3920 2333 3267 2450 3250 2600 2167 3167 2725 2400 28000 21000 29400 23520 14000 19600 14700 19500 15600 13000 19000 16350 14400
Catalog Part No. C1AF28
Model Number 1/4.035-SS
Wt. (per ft) 0.06 0.08 0.11 0.14 0.13 0.17 0.24 0.30 0.39 0.48 0.67 1.04 1.45
Price (per ft)
C1BK43 3/16.035-SS C1EG59 1/4.049-SS C1BR54 5/16.049-SS C1BK87 3/8.035-SS C1BK89 3/8.049-SS C1AE76 1/2.049-SS C1AE78 1/2.065-SS C1EX71 5/8.065-SS C1BK55 3/4.065-SS C1BK57 3/4.095-SS C1AE65 1.109-SS C1AE35 1-1/4.120-SS
871
Tubing
Polyethylene Tubing
Features: Broad range of corrosion resistance and chemical compatibility, vermin & fungus proof, low cost. Application: General low pressure & low temperature applications, instrumentation, food processing. Please review important safety & application information starting on page 1365 Operating Temperature Range: -100F to 175F. Fittings: Brass Push > Connect page 913 Push-In (Brass) page 917 Brass Compression page 903 Polyethylene Tubing
Catalog Part No. Wall Thickness (in) O.D. (in) 0.125 0.15625 0.1875 0.25 0.25 0.3125 0.375 0.375 0.50 0.023 0.025 0.035 0.04 0.04 0.062 0.062 0.062 0.062 Minimum Bend I.D. (in) Radius (in) 0.08 0.106 0.118 0.17 0.17 0.188 0.25 0.25 0.375 0.39 0.47 0.59 0.98 0.98 1.25 1.50 1.50 2.50 Maximum Operating Pressure (psi) 125 125 125 125 125 125 125 125 100 Minimum Burst Pressure (psi) 500 500 500 500 500 500 500 500 400 Pkg. Qty. (ft) 100 100 100 100 100 100 100 100 100 Wt. (pkg) 0.33 0.43 0.10 1.20 1.14 2.00 2.65 2.00 3.00 Price (per pkg)
Mazzer Model
Color Natural Natural Natural Black Natural Natural Black Natural Natural
C1DG85 PE-2AN C1DG84 PE-2.5AN C1DG86 PE-3AN C1DG87 PE-4AB C1DG88 PE-4AN C1DG89 PE-562AN C1DG90 PE-662AB
Fluid Conveying
C1DG91 PE-662AN C1DG92 PE-8AN
Note: Polyethylene Tubing may be purchased by the foot or by the package.
872
Tubing
Air Brake Tubing
Features: Superior abrasion resistance over rubber and Nylon 11 Easy burr-free cutting to assemble Enhanced flexibility over other nylon tubing Improved flow performance over rubber & nylon. Construction: 100% polyamide construction with polyester yarn reinforcement. UV stabilized. Application: Truck & Trailer air brake systems, auxiliary air systems. Meets SAE J844, J1131, J2494-3 and DOT-FMVSS 106. Operating Temperature Range: -65F to 200F. Fittings: Brass Air Brake (Nylon Tubing) page 909 Brass Quick > Connect page 924 Air Brake Tubing
Wall O.D. Thickness (in) (in) 1/8 1/4 1/2 1/2 5/8 0.023 0.040 0.062 0.062 0.092 Minimum I.D. Bend (in) Radius (in) 0.079 0.170 0.376 0.376 0.441 0.25 1.0 2.0 2.0 2.5 Maximum Minimum Operating Burst Pressure Pressure (psi) @ 73 (psi) @73 Pkg Wt. deg.F deg.F Qty (ft) (per ft) 1000 1200 950 950 900 1000 1000 100 500 250 0.01 0.01 0.04 0.04 0.07
Catalog Part No. C1KU99 C1KV11 C1JR67 C1JR68
Synflex Model 4245-0220-1000 4245-0410-1000 3270-08104 3270-10103
Type A A B B B
Color Black Black Black Black Black
Price (per pkg)
C1KU76 3270-0810-0100
Fluid Conveying
Note: Air brake tubing may be purchased by the package.
TP160 Polymide "Nylon 11" Tubing

Application: Flexible nylon tubing. Used for instrumentation; lubrication and air lines; gas, chemical and oil processing; low pressure hydraulics. Operating Temperature Range: -40F to +200F Fittings: Brass Push > Connect page 913 TP160 Polymide "Nylon 11" Tubing
Catalog Part No. C1KN61 C1KN62 C1KN63 C1KN64 Maximum Minimum Minimum Working Burst Tube O.D. Tube Wall Pressure Pressure (psi) Bend Radius (in) (in) (in) @ 70F (psi) @ 70 F @ 70F 1/8 1/4 5/16 1/2 0.023 0.040 0.040 0.062 250 250 250 250 1000 1000 1000 1000 0.62 1.25 2.00 4.50 Wt. (per ft) 0.30 1.20 2.00 3.80 Price (per pkg)
Eaton Model TP16002NA-100 TP16004NA-100 TP16005NA-100 TP16008NA-100
Pkg Qty (ft) 100 100 100 100
873
Tubing
PVC Tubing (Standard Duty) Reinforced - FDA Approved

Features: Materials comply with FDA Specifications. NSF Certified under Standard NSF-51 plastic materials and components for use in food equipment. Non-toxic. White spiraled polyester yarn reinforcement. Longitudinally reinforced with Blue Tracer Yarn to reduce elongation under pressure. Clear PVC tube with clear PVC cover. Light weight, Non-marking, flexible. Self Extinguishing. Silicone-free. Non-conductive. Compund hardness 75 Durometer, Shore A. RoHS compliant. Application: Air lines, air breathing lines, water lines, deionized, pure or distilled water, food & beverage dispensing, potable water transfer, light vacuum lines, wire conduit, pneumatics, packaging machines, mild chemical resistance (call for details). Please review important safety & application information starting on page 1365 Operating Temperature Range: 25F to 150F. (Working pressure decreases as temperature increases). Fittings: Hose Barbs page 839 Hose Clamps page 855 Crimp Ferrules page 867 PVC Tubing (Standard Duty) Reinforced - FDA Approved
Catalog Part No. Arrow Model I.D. (in) O.D. (in) 0.38 0.60 Maximum Working Pressure (psi) @ 68 deg.F 225 Pkg. Qty. (ft) 300 Wt. (per ft) 0.09 Price (per ft)
C1KB35 20-0600-00
Note: May be purchased by the foot or by the package.
Fluid Conveying
PVC Tubing (Clear) Non-Reinforced - FDA Approved
Features: Materials comply with FDA Specifications. NSF Certified under Standard NSF-51. Clear PVC Tube. Light Weight, Non-Marking & Flexible. Self Extinguishing. RoHS compliant. Special packaging, cut lengths available. Application: Food Transfer, Drain Lines, Light Vacuum Lines, Sight Gauges. Temperature Range 25F to 150F. Please review important safety & application information starting on page 1365 Fittings: Hose Barbs page 839 Hose Clamps page 855 Crimp Ferrules page 867 PVC Tubing (Clear) Non-Reinforced - FDA Approved
Catalog Part No. C1JZ57 Arrow Model 10-0810-00 I.D. (in) O.D. (in) 0.50 0.75 1.00 0.625 1.00 1.25 Maximum Working Pressure (psi) @ 68 deg.F 30 35 25 Pkg. Qty. (ft) 100 100 100 Wt. (per ft) 0.06 0.18 0.23 Price (per ft)
C1KA33 10-1216-00 C1KA38 10-1620-00
Note: Non-Reinforced PVC Tubing may be purchased by the package.
874
Tubing
PVC Tubing (Clear) Non-Reinforced - FDA Approved

Features: Eatons line of clear PVC tubing products are manufactured with materials which comply with FDA Regulation 21 CFR 177.1520 and are NSF-51 listed. These products are lightweight, non-marking and flexible. Application: These are excellent products for food and beverage transfer lines, air lines, drain lines, sight gauges, potable water transfer, and pneumatic applications. Operating Temperature Range: +15F to +150F Fittings: Hose Barbs page 839 Hose Clamps page 855 Crimp Ferrules page 867 PVC Tubing (Clear) Non-Reinforced - FDA Approved
Catalog Part No. Boston Model I.D. (in) 0.19 0.25 0.25 0.38 0.38 0.50 0.75 O.D. (in) 0.310 0.380 0.380 0.500 0.500 0.625 1.000 Maximum Working Pressure (psi) 55 55 55 45 45 30 35 Minimum Burst Pressure (psi) 165 165 165 135 135 90 105 Pkg. Qty. (ft) 500 100 200 100 125 100 100 Wt. (per 100 Price (per ft) ft) 2.60 3.20 3.20 4.50 4.50 5.38 18.04
C1KM14 H160305-500R C1KV98 H160406-100 C1KM15 H160406-200R C1KV99 H160608-100 C1KM16 H160608-125R C1KW11 H160810-100 C1KW12 H161216-100
Fluid Conveying
PVC Tubing (Clear) Reinforced - FDA Approved

Features: Eatons line of clear PVC hose products are manufactured with materials which comply with FDA Regulation 21 CFR 177.1520 and are NSF-51 listed. These products are lightweight, nonmarking and flexible. Application: These are excellent products for food and beverage transfer lines, air lines, drain lines, sight gauges, potable water transfer, and pneumatic applications which require higher pressure than our standard Clearforce products can handle. Operating Temperature Range: +15F to +150F Fittings: Hose Barbs page 839 Hose Clamps page 855 Crimp Ferrules page 867 PVC Tubing (Clear) Reinforced - FDA Approved
Catalog Part No. Boston Model I.D. (in) 0.250 0.380 0.380 0.500 0.625 0.750 1.000 1.250 1.500 2.000 O.D. (in) 0.450 0.590 0.590 0.750 0.875 1.031 1.313 1.688 1.938 2.500 Maximum Working Pressure (psi) 250 225 225 200 200 150 125 100 100 75 Minimum Bend Radius (in) 1.50 2.00 2.00 2.00 2.50 2.50 3.50 Pkg. Qty. (ft) 125 300 75 300 300 300 200 100 100 100 Wt. (per 100 Price ft) (per ft) 6.50 9.00 9.00
C1KM19 H28504-125R C1KW13 H28506-300R C1KM20 H28506-75R C1KW14 H28508-300R C1KW15 H28510-300R C1KW16 H28512-300R C1KW17 H28516-200R C1KW18 H28520-100 C1KW19 H28524-100 C1KW20 H28532-100
15.00 17.00 23.00 32.00 58.00 69.00 100.00
875
Tubing
EH049 ESP Fuel Line
Features: PVDF barrier, Polyester reinforced, CARB approved, Meets parts of SAE J1527 B1 and SAE J30 R6, R9, R11 specifications Application: Fuel delivery lines for small engines, Petroleum-based chemicals, Biodiesel fuel to 100%, Marine fuel lines. Operating Temperature Range: -25F to +150F Fittings: Contact us for information on tube end fittings. EH049 ESP Fuel Line
Catalog Part No. C1KL42 C1KL43 C1KL44 Boston Model EH04903-300R EH04904-200R EH04905-150R Tube I.D. (in) 0.187 0.250 0.312 Tube O.D. (in) 0.311 0.375 0.438 Maximum Working Pressure (psi) 50 50 50 Pkg Qty (ft) 300 200 150 Wt. (per ft) 0.25 0.03 0.04 Price (per ft)
Fluid Conveying
Steel Brake Line Assemblies
Features: Superior rust protection with galvanized zinc coating. Domestic Brake Lines: Standard Inverted Flare. Steel Brake Line Assemblies
Catalog Part No. AGS Model Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Style Size x Length (inches) 3/16 x 8 3/16 x 12 3/16 x 20 3/16 x 30 3/16 x 40 3/16 x 51 3/16 x 60 3/16 x 72 1/4 x 8 1/4 x 12 1/4 x 20 1/4 x 30 1/4 x 40 1/4 x 51 1/4 x 60 Wt. 0.06 0.07 0.11 0.14 0.18 0.22 0.26 0.31 0.08 0.10 0.14 0.19 0.24 0.29 0.35 Price Each
C1FY76 BL-308 C1FY77 BL-312 C1FY78 BL-320
C1FY79 BL-330 C1FY80 BL-340 C1FY81 BL-351 C1FY82 BL-360 C1FY83 BL-372 C1FY84 BL-408 C1FY85 BL-412 C1FY86 BL-420 C1FY87 BL-430 C1FY88 BL-440 C1FY89 BL-451 C1FY90 BL-460
876
Tubing
Hydraulic Power & Control Steel Brake Line Assemblies
Catalog Part No. AGS Model Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Domestic Style Size x Length (inches) 1/4 x 72 5/16 x 8 5/16 x 12 5/16 x 20 5/16 x 40 5/16 x 51 5/16 x 60 5/16 x 72 3/8 x 8 3/8 x 12 3/8 x 20 3/8 x 40 3/8 x 51 3/8 x 60 Wt. 0.41 0.09 0.11 0.17 0.30 0.37 0.43 Price Each
C1FY91 BL-472 C1FY92 BL-508 C1FY93 BL-512 C1FY94 BL-520 C1FY96 BL-540 C1FY97 BL-551 C1FY98 BL-560 C1FY99 BL-572 C1FZ11 C1FZ12 C1FZ13 C1FZ15 C1FZ16 C1FZ17 BL-608 BL-612 BL-620 BL-640 BL-651 BL-660
0.51 0.13 0.17 0.24 0.41 0.51 0.58
877
Tube Fittings
Steel Flare & Inverted Flare Nuts, Flare Sleeves

Catalog Part No. C1AJ77 C1AJ78 C1AJ79 C1AJ80 C1AJ81 1290-3S 1290-4S 1290-5S 1290-6S 1290-8S 1290-10S 1290-12S 1290-16S 1290-20S Tube O.D. (in) 0.19 A (in) 0.6 B (in) 0.44 Price Each
Aeroquip Model
Wt. 0.01 0.04 0.05 0.05 0.06 0.09 0.18 0.25 0.55
0.25 0.62 0.56 0.31 0.67 0.62 0.38 0.72 0.69 0.50 0.84 0.88 0.63 0.97 1.0 1.0 0.75 1.02 1.25 1.12 1.50 2.0 1.25 1.22
1290 JIC 37 Flare Nut (Use with 900605 Tube Sleeve)
C1AJ72 C1AJ73 C1AJ75 C1AJ76
Catalog Part No. C1EP32 900605-3S C1CB30 900605-4S
Aeroquip Model
Tube O.D. (in)
A (in)
Wt. 0.50 0.01 0.01 0.01 0.01 0.02 0.03 0.04 0.08
Price Each
0.19 0.34 0.25 0.41 0.31 0.44 0.38 0.50 0.38 0.50 0.50 0.56 0.50 0.56 0.63 0.66 0.75 0.68 0.75 0.69 1.00 0.78 1.00 0.78 1.25 0.91
900605 JIC 37 Flare Sleeve (Use with 1290 Flare Nut)
C1CB31 900605-5S C1KT75 NB300-06Z C1CB32 C1CB33 C1CB25 C1CB26 900605-6S 900605-8S 900605-10S 900605-12S C1KT76 NB300-08Z
Fluid Conveying
C1KT77 NB300-12Z C1KT78 NB300-16Z C1CB28 900605-16S C1CB29 900605-20S Note: NB is Eaton-Winner model. Catalog Part No.
Model Number
Tube O.D. (in) 0.25 0.31
L (in) Wt. 0.56 0.62 0.02 0.03
Price Each
C1FF65 2105X4 C1BB97 2105X5
2105 Inverted Flare Tube Nut
878
Tube Fittings
Steel Versil Flare Nuts & Ferrules
Features: Versil Flare Tube Fittings consist of a nut & ferrule (listed below) and a steel JIC 37 flare adapter. List of steel JIC 37 flare adapters is on page 940 Note: The maximum hardness of tubing used with this style fitting should not exceed Rockwell B65. (Stainless steel tubing is not approved). Assembly Instructions for Versil Flare Tube Fittings: Tubing Cut Off: Cut tubing square (+/- 1). Tube should be cut to fit tight against the face of the standard JIC 37 flare body. De burring: All cut tubes should be deburred, both internally and externally. Cleaning: Clean all dirt and grit from the I.D. and O.D. of the tube. Initial Assembly: Slide the nut and then the ferrule onto the tube, with the tapered end of the ferrule pointing toward the nut. Lubricate all mating surfaces of the nut, ferrule and body with a heavy lubricant such as Aeroquip 222070 lube. Place end of tube against standard JIC 37 flare body. Slide the ferrule and nut against body and tighten the nut onto the body "hand tight". Mark the nut in relation to the body for location. Hold tube against body and tighten nut a total of 1-1/4 turns (-3 through -10), and 1-1/2 turns (-12 through -32). Reassembly: Slide nut against the body and tighten "hand tight". Mark the nut for location. Tighten nut a minimum of one "hex" flat. Re-Use: The Versil Flare flareless tube fitting is designed for a minimum of 10 reassemblies.
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.38 0.50 0.63 1.0 A (in) 0.82 0.86 0.08 1.12 1.40 Price Each
Thread T 7/16-20 9/16-18 3/4-16 7/8-14 1-5/16-12
Wt. 0.03 0.05 0.08
C1CR38 FC2875-04S C1CR40 FC2875-06S C1CR41 FC2875-08S C1CR42 FC2875-10S
0.11 0.29
FC2875 C1CR44 FC2875-16S Versil Flare Flareless Tube Nut (Use with FF9605 Tube Ferrule and JIC 37 Flare Adapter)
Catalog Part No. C1CV63 FF9605-04S C1CV64 FF9605-05S C1CV65 FF9605-06S
Aeroquip Model
Tube O.D. (in)
A (in)
B (in)
Wt. 0.01 0.11 0.01 0.02 0.02 0.04 0.04
Price Each
0.25 0.42 0.25 0.31 0.42 0.31 0.38 0.46 0.38 0.50 0.57 0.50 0.63 0.58 0.62 0.75 1.0 0.7 0.7 0.75 1.0
FF9605 Versil Flare Flareless Tube Ferrule (Use with FC2875 Tube Nut and JIC 37 Flare Adapter)
C1CV66 FF9605-08S C1CV67 FF9605-10S C1CV68 FF9605-12S C1CV69 FF9605-16S
879
Tube Fittings
Steel ORS-TF Tube Fittings
The patented ORS-TF tube fitting is a compression type fitting that works on a variety of tubing. Recommended wall thickness: 1/4" & 3/8" (.028 - .065). 1/2" (.035 - .120). 5/8" (.035 - .095). 3/4" (.049 - .120). 1" (.049 - .134). 1-1/4" (.049 - .156). 1-1/2" (.065 - .188). Note: The maximum hardness of tubing used with this style fitting should not exceed Rockwell B65. (Stainless steel tubing is not approved). Assembly Instructions for ORS-TF Tube Fittings: 1: Measure the length of tubing required, adjusted to account for the shoulder thickness of the sleeve. It is imperative that the routing leave a length of unbent tubing to fully enter the ORS fitting. This straight length must be free from surface defects, thin-out distortion and ovality. 2: Cut the measured tubing squarely ( 1). 3: Deburr the tube ends internally and externally. After deburring, remove all contaminants from the interior and exterior of the tube ends. 4: Inspect the ORS adapter and all ORS-TF components for damage. Sealing surfaces must be free from all surface gouges, scratches, dirt and contaminants. Apply a thin film of a compatible lubricant to the O-ring prior to installation. 5: Place the nut, ferrule and sleeve onto tubing, making sure the identification groove on the ferrule is toward the nut. Assemble the nut to the adapter until "hand-tight" with the tubing fully inserted into the fitting until bottomed out. Mark the nut in relation with the adapter, and tighten 1-1/2 turns with wrench. The ORS-TF sleeve cannot be used to pre-set multiple tube assemblies. It may be used once for pre-setting. 6: The ORS-TF tube assemblies are designed for re-use and can be reinstalled by tightening the nut until a sharp increase in resistance is felt (approximately 1/4 turn beyond "hand-tight"). 7: WARNING: Tubing must be fully inserted into the fitting and the nut tightened as specified above to ensure performance and to prevent leakage and potential fitting blow-off. Excessive tightening of the nut beyond the recommended level may affect performance. 8: If connections must be temporarily disassembled, use a threaded plug to contain the ORS-TF components and keep contaminants and dirt from entering the system.
Fluid Conveying
880
Tube Fittings
Steel ORS-TF Tube Fittings
Catalog Part No. Tube Dash O.D. Aeroquip Model Size (in) 20S 1.25 Price Each
A (in) 0.56
E (in) 1.05
F (in) 1.26
Wt. 0.12
C1GL86 FF90103-20S
FF90103 ORS-TF Sleeve
881
Tube Fittings
Steel Braze Type Tube Fittings - ORS

Catalog Part No. Aeroquip Model Tube O.D. (in) 0.25 0.38 0.50 Wt. 0.01 0.06 0.08 Price Each
C1CV48 FF9075-19 C1CV45 FF9075-06 C1CV49 FF9075-74
FF9075 ORS Silver Braze Ring
Fluid Conveying
882
Tube Fittings
Steel Flareless Fittings - 7000 Series Ermeto
Eaton 7000 Series Ermeto Steel Tube Fittings
Typical Application: Hydraulic, instrumentation and chemical processing systems. Highly recommended for high pressure applications. For your particular application, please review the Important Safety Information starting on page 1365 Pressure: Operating pressure depends on tube and fitting size. See Technical Information note below. Vibration: Excellent resistance. Temperature Range: -65F to +400F at maximum operating pressures. Has been used at 800F and 1000 psi to 4000 psi depending on tube size. See Technical Information note below. Material: AISI/SAE 12L14 carbon steel with exclusive Weathercote finish, which fully resists the effects of nonflammable hydraulic fluids. Used With: Aluminum, hard or half copper, steel, stainless steel and extra heavy wall tubing that cannot be flared. See Technical Information note below. Features: An excellent high pressure fitting - NO TUBE FLARING. Used with extra heavy wall tubing. Broad selection of sizes and styles. Conformance: Meets specifications and standards of ASA, ASME and SAE. Technical Information: page 1165
Catalog Part No. C1JB67 C1JB68 Eaton Model 7705X6 7705X8 Tube O.D. (in) 0.38 0.50 M (in) 1.05 1.25 Wt. 0.26 0.48 Price Each
Fluid Conveying
7705 Union Tee
883
Tube Fittings
Steel Flareless Fittings
Steel Flareless Tube Fittings
Material: Forged Bodies: 12L14, Straight Bodies: 12L14, Cold Formed Nuts: C1110, Bar Stock Nut: 12L14, Flareless Sleeves: 12L14. Plating: Phosphate Coated (black). Applications: For use with applications such as: Construction machinery, Textile machinery, Machine tools, Chemical, Marine, Military, and most other high pressure hydraulic applications. Applications using thick wall tubing where flaring is not practical. CAUTION: 7000 Flareless Fittings are NOT RECOMMENDED for use in instrumentation applications where toxic and noxious gases are present. For your particular application, please review the Important Safety Information starting on page 1365 Temperature Range: -30F to 450F. Straight thread fittings which use O-Rings to seal are restricted to the temperature range of the material used to construct the O-Ring. Pressure Ratings: Working Pressure up to 8000 PSI. CAUTION: Working pressures will vary depending on tube and fitting size. (For applications using extreme pressures at 5000 PSI or above (or) for application with extreme pressure fluctuations, contact us for assistance). Tubing: Steel Tubing page 869
Catalog Part No. World Wide Model Tube O.D. (in) 0.50 L (in) Wt. 0.84 0.08 Price Each
Fluid Conveying
C1KV28 7105X8 Note: 7105X8 is Eaton Aeroquip.
7105 Nut
Catalog Part No.
World Wide Model
Tube O.D. (in) 0.25 0.31 0.38 0.50 0.63 0.75 1.00
L (in) Wt. 0.36 0.37 0.39 0.43 0.44 0.48 0.48 0.01 0.01 0.01 0.07 0.01 0.03 0.10
Price Each
C1KV29 7165AX04-WWF C1KV30 7165AX05-WWF C1KV31 7165AX06-WWF C1KV32 7165AX08-WWF
7165A Ferrule
C1KV33 7165AX10-WWF C1KV34 7165AX12-WWF C1KV35 7165AX16-WWF
884
Tube Fittings
Steel Flareless Fittings
Catalog Part No. World Wide Model Tube O.D. (in) 0.63 0.75 M (in) 1.42 1.58 Wt. 0.50 0.76 Price Each
C1FX38 7505X10 C1FX39 7505X12
7505 90 Union Elbow
885
Tube Fittings
Steel Metric Flareless Fittings

Design Features: Conforms in design & dimensions to latest DIN standards. Construction: Forged or drawn high quality steel. Working Pressure: Series LL: 100 bar with 4:1 safety factor. Series L: Varies from 100 to 250 bar (see tables) with 4:1 safety factor. Series S: Varies from 160 to 630 bar (see tables) with 4:1 safety factor. Operating Temperature Range: Up to 120C. Tubing: Metric Steel Tubing page 870 Application: For your particular application, please review the Important Safety Information starting on page 1365
Tube O.D. (mm) 6 6 8 8 10 10 12 12 15 16 18 20 22 25 28 30 Maximum Operating Pressure (bar) 500 800 500 800 500 800 400 630 400 630 400 420 250 420 250 420 Thread Size M (mm) M 12x1.5 M 14x1.5 M 14x1.5 M 16x1.5 M 16x1.5 M 18x1.5 M 18x1.5 M 20x1.5 M 22x1.5 M 24x1.5 M 26x1.5 M 30x2.0 M 30x2.0 M 36x2.0 M 36x2.0 M 42x2.0
Catalog Part No. C1KX18
Waltersheid Model WAL039852
Series L S L S L S L S L S L S L S L S
Wt. 0.02 0.04 0.03 0.05 0.04 0.07 0.04 0.07 0.09 0.14 0.14 0.22 0.18 0.45 0.20 0.48
Price Each
C1KW99 WAL039842 C1KX11 WAL039843 C1KX19 WAL039853 C1KX12 WAL039844 C1KX20 WAL039854 C1KX13 WAL039845
Waltersheid Nut
C1KX21 WAL039855 C1KX14 WAL039846 C1KX22 WAL039857 C1KX15 WAL039847 C1KX23 WAL039858 C1KX16 WAL039848 C1KX24 WAL039859 C1KX17 WAL039849 C1KX25 WAL039860
Fluid Conveying
Catalog Part No.
Waltersheid Model
Tube O.D. (mm) 4 6 8 10 12 15 16 18 20 22 25 28 30
Series LL L L L L L S L S L S L S
Maximum Operating Pressure (bar) 100 500 500 500 400 400 630 400 420 250 420 250 420
Wt.
Price Each
C1KX26 WAL039862 C1KX38 WAL372404 C1KX39 WAL372405 C1KX40 WAL372406 C1KX41 WAL372407 C1KX42 WAL372408 C1KX46 WAL372415 C1KX43 WAL372409 C1KX47 WAL372416 C1KX44 WAL372410 C1KX48 WAL372417 C1KX45 C1KX49 WAL372411 WAL372418
0.10 0.01 0.01 15.00 0.14 0.02 0.03 0.03 0.04
Waltersheid Profile Ring
1 millimeter = 0.03937 inches
1 bar = 14.5 psi
F = (C x 1.8) + 32
886
Tube Fittings
Tube O.D. D1 (mm) 6 6 8 8 10 10 12 12 16 20 30 Maximum Operating Pressure (bar) 250 630 250 630 250 630 250 630 400 400 250
Catalog Part No.
Voss Model
Series L S L S L S L S S S S
L1 (mm) 39 45 40 47 42 49 43 51 57 66 80
Wt. 0.08 0.14 0.11 0.19 0.14 0.25 0.19 0.30 0.51 0.82 1.80
Price Each
C1AH76 112-001 C1ER54 112-501 C1AH77 112-051 C1ER55 112-551 C1AH78 112-101 C1ER73 112-601 C1AH88 112-151 C1ER91 112-651 C1AH92 112-751 C1AH93 112-801 C1GA81 112-901
111 / 112 Straight Coupling
Catalog Part No.
Waltersheid Model
Tube O.D. (mm) 6 6 8 8 10 10 12 12 16 20 25 30
Series L S L S L S L S S S S S
Maximum Operating Pressure (bar) 500 800 500 800 500 800 400 630 630 420 420 420
L5 (mm) 24 30 25 32 27 32 28 38 38 44 50 54
Wt. 0.03 0.04
Price Each
C1KW82 WAL037848 C1KW86 WAL037853 C1KW83 WAL037849 C1KW87 WAL037854 C1KW84 WAL037850 C1KW88 WAL037855 C1KW85 WAL037851 C1KW89 WAL037856 C1KW90 WAL037858 C1KW91 WAL037859 C1KW92 WAL037860 C1KW93 WAL037861
Fluid Conveying
0.09 0.13 0.19 0.31 0.55 0.73
Waltersheid Straight Union Connector
Catalog Part No. C1AJ36 C1JL78 C1AJ40
Voss Model 120-101 120-601 120-251
Tube O.D. D1 (mm) 10 10 18
Series L S L
Maximum Operating Pressure (bar) 250 630 160
L1 (mm) 30 34 23.5
Wt. 0.21 0.28 0.53
Price Each
119 / 120 Equal Elbow
1 bar = 14.5 psi
F = (C x 1.8) + 32
887
Tube Fittings

Tube Catalog Waltersheid O.D. (mm) Series Part No. Model C1KW94 WAL037869 C1KW96 WAL037879 C1KX50 WAL373388 C1KX51 WAL373400 C1KW95 WAL037872 C1KX52 WAL373402 10 10 12 16 18 25 L S L S L S Maximum Operating Pressure L5 Includes (bar) (mm) Ring/Nut? 500 800 400 630 400 420 22 25 24 33 31 42 No No Yes Yes No Yes 0.23 0.63 0.25 1.77
Wt. 0.07
Price Each
Waltersheid Elbow Union Connector
Catalog Part No. C1KX33 C1KX28 C1KX29 C1KX34 C1KX31 C1KX35 C1KX32 C1KX36
Waltersheid Model WAL063887 WAL063878 WAL063879 WAL063890 WAL063881 WAL063892 WAL063882 WAL063894
Tube O.D. (mm) 6 6 8 10 12 12 15 16 18 20 25
Series L S L L L S L S L S S
Maximum Operating Pressure (bar) 500 800 500 500 400 630 400 630 400 420 420
L5 (mm) 21 23 21 22 24 29 28 33 31 37 42
Wt. 0.10 0.10 0.09 0.12 0.17 0.24 0.26 0.43 0.39 0.90 1.18
Price Each
C1KX27 WAL063877
Fluid Conveying
C1KX30 WAL063880
Waltersheid Elbow Swivel Connector
C1KX53 WAL374570
Catalog Part No. C1JL86
Voss Model 134-601
Tube O.D. D1 (mm) 10 12
Series S L
Maximum Operating Pressure (bar) 630 250
L1 (mm) 34 32
Wt. 0.39 0.30
Price Each
C1AK43 134-151
133 / 134 Equal Tee
1 bar = 14.5 psi
F = (C x 1.8) + 32
888
Tube Fittings
Tube O.D. (mm) 10 12 Maximum Operating Pressure (bar) 500 400
Catalog Part No.
Waltersheid Model
Series L L
L5 (mm) 22 24
Wt. 0.09 0.13
Price Each
C1KW97 WAL037893 C1KW98 WAL037894
Waltersheid Equal Tee

Tube Maximum O.D. Operating D1 Pressure Thread Size L1 Voss Model (mm) Series (bar) D2 (mm) (mm) 6 8 12 15 16 28 L L L L S L 250 250 250 250 400 100 R 1/8 K R 1/4 K R 3/8 K R 1/2 K R 1/2 K R1K 24.5 27 28.5 30.5 38.5 37
Catalog Part No.
Wt. 0.05 0.09 0.14 0.22 0.35 0.55
Price Each
C1AG89 104-001 C1AG91 104-051 C1AH27 104-151 C1AH28 104-201 C1AH32 104-751 C1AH31 104-351
Fluid Conveying
103 / 104 Male Stud Coupling BSP Taper
Catalog Part No.
Tube Maximum O.D. Operating D1 Pressure Thread Size L1 Voss Model (mm) Series (bar) D2 (NPT) (mm) 6 6 8 8 10 12 12 16 18 20 22 25 L S L S L L S S L S L S 250 630 250 630 250 250 630 400 160 400 160 400 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 25 31 28 33 29 29.5 35.5 40.5 34.5 45.5 36.5 52.5
Wt. 0.05 0.11 0.09 0.13 0.10 0.14 0.23 0.36 0.31 0.57 0.41 1.07
Price Each
C1AH50 106-001 C1FN37 106-501 C1AH51 106-051 C1FJ54 106-551 C1AH52 106-101 C1AH55 106-151 C1ZV46 106-651
105 / 106 Male Stud Coupling NPT
C1AH61 106-751 C1AH57 106-251 C1AH62 106-801 C1AH58 106-301 C1AH63 106-851
1 bar = 14.5 psi
F = (C x 1.8) + 32
889
Tube Fittings

Tube Maximum O.D. Operating D1 Pressure (mm) Series (bar) 8 10 15 L L L 250 250 250 Thread Size D2 (mm) M 12x1.5 M 14x1.5 M 18x1.5
Catalog Part No.
Voss Model
Type Peflex Peflex Peflex
L1 (mm) Wt. 25 26 29 0.09 0.11 0.22
Price Each
C1AL64 184-401 C1AL65 184-411 C1AL67 184-431
109 / 184 Male Stud Coupling

Catalog Part No. Voss Model Tube Maximum O.D. Operating D1 Serie Pressure (mm) s (bar) 8 12 15 16 18 28 L L L S L L 250 250 250 400 160 100 Thread Size D2 (mm) R 1/4 R 3/8 R 1/2 R 1/2 R 1/2 R1 L1 (mm) 25 27 29 37 31 34 Price Each
Type Peflex Peflex Peflex Peflex Peflex Peflex
Wt. 0.10 0.15 0.26 0.36 0.31 0.57
C1AL51 184-201 C1AL53 184-221 C1AL54 184-231 C1AL60 184-341 C1AL55 184-241 C1AL57 184-261
Fluid Conveying
110 / 184 Male Stud Coupling BSP Parallel

Maximum Operating Pressure (bar) 500 400 630 250
Catalog Part No. C1KW78 C1KW79 C1KW81 C1KW80
Waltershei Tube O.D. Serie d Model (mm) s WAL037616 WAL037619 WAL037631 WAL037623 8 12 16 28 L L S L
Thread Size G G 1/4 G 3/8 G 1/2 G1
Wt. 0.06 0.09 0.20 0.37
Price Each
Waltersheid BSPP with Seal
1 bar = 14.5 psi
F = (C x 1.8) + 32
890
Tube Fittings
Tube O.D. D1 Catalog Part No. Voss Model (mm) C1FX57 793-341 C1EW38 793-351 C1FN22 793-451 C1EW39 793-361 C1FP94 793-461 6 8 8 10 10 12 14 15 16 16 22 25 28 Maximum Operating Pressure Thread Size L1 (bar) D2 (mm) (mm) Wt. 250 250 630 250 630 250 630 250 400 M 12x1.5 M 14x1.5 M 16x1.5 M 16x1.5 M 18x1.5 M 18x1.5 M 22x1.5 M 22x1.5 M 24x1.5 M 24x1.5 160 400 100 M 30x2 M 36x2 M 36x2 14 15 20 16 20 17 24 18 24 24 21 32 22 0.02 0.03 0.06 0.04 0.07 0.05 0.14 0.09 0.16 0.17 0.19 0.49 0.32
Series L L S L S L S L S Heavy L S L
Price Each
793 Tube Plug
C1EW40 793-371 C1FP95 793-481 C1EW41 793-381 C1FN24 793-491 9203S-16-A C1FN29 DAPTAL C1EW43 793-401 C1GH69 793-511 C1EW44 793-411
Note: 9203S is Adaptall model. Note: WAL is Eaton-Waltersheid Maximum Operating Pressure Thread Size L (bar) M (mm) (mm) Wt. 500 500 500 630 250 M 12x1.5 M 14x1.5 M 16x1.5 M 20x1.5 M 30x2.0 17 17 20 21 23 0.25 0.05
Tube Catalog Waltershei O.D. Part No. d Model (mm) C1KX54 WAL609765 C1KX55 WAL609766 C1KX37 WAL372285 C1KW65 WAL024051 C1KX56 WAL609768 6 8 10 12 22
Series L L L S L
Price Each
Fluid Conveying
Waltersheid Tube Plug
Catalog Part No.
Voss Model
Tube O.D. D2 (mm) 6 8 8 10 12 12 14 15 16 20 25 28
Series L L S L L S S L S S S L
Maximum Operating Pressure (bar) 315 315 630 315 315 630 630 315 400 400 400 160
Thread Size D3 (mm) M 12x1.5 M 14x1.5 M 16x1.5 M 16x1.5 M 18x1.5 M 20x1.5 M 22x1.5 M 22x1.5 M 24x1.5 M 30x2 M 36x2 M 36x2
Wt. 0.10 0.05 0.06 0.20 0.11 0.13 0.18 0.62 0.23 0.39 0.65 0.50
Price Each
C1DU54 1193-041000 C1DU55 1193-051000 C1FR46 1193-151000 C1DU56 1193-061000
1193 Blanking Plug (For blanking off couplings)
C1DU57 1193-071000 C1FR48 1193-171000 C1FR49 1193-181000 C1DU58 1193-081000 C1EG60 1193-191000 C1EG61 1193-201000 C1EG62 1193-211000 C1DU61 1193-111000
1 bar = 14.5 psi
F = (C x 1.8) + 32
891
Tube Fittings

Tube O.D. (mm) 6 18 Maximum Operating Pressure (bar) 800 400
Catalog Part No.
Waltersheid Model
Series L L
L (mm) 17 21
Wt. 0.08
Price Each
C1KX57 WAL612330 C1KX58 WAL612335
Waltersheid Cap
Fluid Conveying
1 bar = 14.5 psi
F = (C x 1.8) + 32
892
Tube Fittings
158 Swivel Elbow (Swivel Elbow part only)
Catalog Part No. C1AL12 C1AL20 C1AL13 C1AL14 C1AL15 C1AL23 C1AL16 C1AL24 C1AL17 C1AL26
Voss Model 158-021 158-521 158-071 158-121 158-171 158-671 158-221 158-771 158-271 158-871
Tube Maximum O.D. Operating D1 Pressure Companion Fitting For Metric Parallel Thread (mm) Series (bar) 6 6 8 10 12 12 15 16 18 25 L S L L L S L S L S 250 630 250 250 250 630 250 400 160 400 184-431 (C1AL67) M 18x1.5 184-541 (C1AL70) M 22x1.5 184-441 (C1AL68) M 22x1.5 184-401 (C1AL64) M 12x1.5 184-411 (C1AL65) M 14x1.5 184-421 (C1AL66) M 16x1.5 184-391 (C1AL63) M 10x1
Companion Fitting For BSP Parallel Thread 184-191 (C1AL50) R 1/8 184-291 (C1AL58) R 1/4 184-201 (C1AL51) R 1/4 184-211 (C1AL52) R 1/4 184-151 R 3/8 184-231 (C1AL54) R 1/2 184-341 (C1AL60) R 1/2 184-241 (C1AL55) R 1/2 184-361 (C1AL62) R 1
Wt. 0.09 0.14 0.12 0.16 0.21 0.32 0.36 0.59 0.51 1.66
Price Each
Fluid Conveying
Note: Use this swivel plus one of the companion fittings listed previously for a complete 90 swivel elbow fitting.
893
Tube Fittings
Stainless Steel Flare Nuts & Sleeves

Catalog Part No. Tube O.D. (in) 0.19 0.25 0.31 0.38 0.50 0.63 0.75 1.0 1.25 Price Each
SSP Model
Thread T 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12
L (in) Wt. 0.6 0.61 0.67 0.72 0.84 0.97 1.02 1.12 1.22 0.01 0.03 0.03 0.04 0.07 0.15 0.17 1.15 0.54
C1CZ67 J3N C1CZ92 J4N C1DA17 J5N
J-N JIC 37 Flare Nut
C1DA43 J6N C1DA78 J8N C1CZ16 J10N C1CZ35 J12N
C1CZ50 J16N C1GM93 J20N
Catalog Part No.
SSP Model
Tube O.D. (in) 0.19 0.25 0.31 0.38 0.50 0.63 0.75 1.0 1.25
L (in) Wt. 0.34 0.41 0.44 0.50 0.56 0.66 0.68 0.78 0.91 0.01 0.01 0.01 0.01 0.15 0.02 0.03 0.14 0.07
Price Each
C1CZ68 J3S C1CZ94 J4S C1DA19 J5S
J-S JIC 37 Flare Sleeve
C1DA45 J6S C1DA80 J8S C1CZ18 J10S C1CZ37 J12S C1CZ52 J16S C1JE70 J20S
Fluid Conveying
894
Tube Fittings
316 Stainless Steel SSP Duolok Tube Fittings (Swagelok Interchange)
SSP Duolok 316 Stainless Steel Tube Fittings (Swagelok Interchange)
Features: Duolok tube fittings provide a reliable, leak-proof connection in instrumentation and process tubing systems. The double ferrule design compensates for the variations in tubing materials, hardness and thickness of the tube wall to provide leak-tight connections in an extensive range of applications. Materials: Straight fittings are machined from type 316 stainless steel cold-finished bear stock in accordance with ASTM A-276 and ASTM A-479. Shaped bodies are machined from close-grained 316 stainless steel forgings in accordance with ASTM A-182. All components are heat code traceable with certified material test reports (CMTRs) available. Pressure Ratings: Generally, Duolok tube fittings are rated for pressures equal to the maximum allowable working pressures of the tubing recommended for use with the fittings (stainless steel tubing). Some specially designed fittings, bored-through fittings, AN fittings, O-Ring Seal fittings and SAE integral end fittings may have a lower pressure rating than that of the tubing. Contact us for application assistance. Temperature Factors: Duolok tube fittings function reliably in an extremely wide range of operating temperatures. Elevated temperatures will reduce the maximum working pressure capability of the tubing system. For applications at elevated temperatures, contact us for application assistance. Gageability: Duolok tube fittings are designed, manufactured and quality controlled to be gaugeable for sufficient pull-up during initial installation. Contact us for detailed assembly instructions. Interchangeability: Duolok tube fittings are designed, manufactured and quality controlled to be totally interchangeable with the Swagelok brand of tube fittings. Tubing Selection: Stainless Steel Tubing page 871 Assembly Instructions & Technical Information: page 1159 Also, please review the Important Safety Information starting on page 1365
Catalog Part No. Tube O.D. A T (in) Thread P (in) 0.25 0.25 0.25 0.38 0.38 0.38 0.50 0.50 0.50 0.63 0.75 0.75 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 B (in) D (in) E (in) Price Each
SSP Model
Wt. 0.05 0.08 0.10 0.09 0.11 0.19 0.14 0.15 0.21 0.22 0.26 0.29 0.55
C1FN97 ISSD4MC2 C1FN98 ISSD4MC4 C1FN99 ISSD4MC6 C1FP28 ISSD6MC4 C1FP29 ISSD6MC6
1.29 1.00 0.60 0.17 1.49 1.20 0.60 0.19 1.51 1.22 0.60 0.19 1.57 1.28 0.66 0.28 1.57 1.28 0.66 0.28 1.82 1.53 0.66 0.28 1.71 1.31 0.90 0.28 1.71 1.31 0.90 0.38 1.93 1.53 0.90 0.41 1.93 1.53 0.96 0.47 1.99 1.59 0.96 0.47 1.99 1.59 0.96 0.62
MC Male Connector
C1FP30 ISSD6MC8 C1FP48 ISSD8MC4 C1FP49 ISSD8MC6 C1FP50 ISSD8MC8 C1GE14 ISSD10MC8 C1FN86 ISSD12MC8 C1FN85 ISSD12MC12 C1FN89 ISSD16MC16
1.00 1-11-1/2 2.45 1.97 1.23 0.88
895
Tube Fittings

Catalog Part No. Tube O.D. A T (in) Thread P (in) 0.25 0.25 0.38 0.38 0.38 0.50 0.50 0.63 0.75 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 1/2-14 3/4-14 Bx (in) By (in) D (in) E (in) Price Each
SSP Model
Wt. 0.08 0.09 0.13 0.17 0.29 0.24 0.31 0.34 0.45 0.90
C1FP13 ISSD4ME2 C1FP14 ISSD4ME4 C1FP32 ISSD6ME4 C1FP33 ISSD6ME6 C1FP34 ISSD6ME8 C1FP53 ISSD8ME6
1.06 0.77 0.74 0.60 0.17 1.06 0.77 0.92 0.60 0.19 1.20 0.91 1.00 0.66 0.28 1.23 0.94 1.03 0.66 0.28 1.31 1.02 1.30 0.66 0.28 1.42 1.02 1.11 0.90 0.38 1.42 1.02 1.30 0.90 0.41 1.50 1.10 1.38 0.96 0.47 1.57 1.17 1.45 0.96 0.62
ME Male Elbow
C1FP54 ISSD8ME8 C1GF17 ISSD10ME8 C1FQ88 ISSD12ME12 C1KG16 ISSD16ME16
1.00 1-11-1/2 1.93 1.45 1.83 1.23 0.88
Catalog Part No.
SSP Model
Tube A O.D. T (in) Thread P (in) 0.25 0.38 0.50 0.50 0.63 0.75 1/4-18 1/4-18 1/4-18 1/2-14 1/2-14 3/4-14
B (in)
D (in)
E (in)
Wt. 0.10 0.12 0.17 0.25 0.26 0.37
Price Each
C1FN94 ISSD4FC4 C1FP23 ISSD6FC4 C1FP44 ISSD8FC4 C1FP45 ISSD8FC8 C1GE11 ISSD10FC8
1.41 1.12 0.60 0.19 1.48 1.19 0.66 0.28 1.59 1.19 0.90 0.41 1.84 1.44 0.90 0.41 1.84 1.44 0.96 0.50 1.90 1.50 0.96 0.62
Fluid Conveying
FC Female Connector
C1GG88 ISSD12FC12
SSP Model ISSD4FE4
Tube A O.D. T (in) Thread P (in) 0.25 1/4-18
Bx (in)
By (in)
D (in)
E (in)
Wt. 0.15
Price Each
1.17 0.88 0.88 0.60 0.19
FE Female Elbow
Catalog Part No. SSP Model Tube O.D. T (in) 0.25 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.75 Thread S 7/16-20 7/16-20 9/16-18 3/4-16 7/8-14 9/16-18 3/4-16 7/8-14 3/4-16 A (in) B (in) D (in) E (in) Wt. 0.06 0.08 0.10 0.15 0.18 0.14 0.17 0.23 0.19 Price Each
C1FP12 ISSD4MCST4 C1GC99 ISSD6MCST4
1.34 1.05 0.60 0.19 1.40 1.11 0.66 0.20 1.46 1.17 0.66 0.28 1.54 1.25 0.66 0.28 1.66 1.37 0.66 0.50 1.54 1.14 0.90 0.28 1.65 1.25 0.90 0.41 1.77 1.37 0.90 0.41 1.81 1.41 0.96 0.42
C1FP31 ISSD6MCST6 C1FR34 ISSD6MCST8 C1GC98 ISSD6MCST10 C1GD14 ISSD8MCST6
MCST C1FP51 ISSD8MCST8 Male Connector Straight Thread O-Ring C1GD12 ISSD8MCST10
C1GC90 ISSD12MCST8
896
Tube Fittings
Catalog Part No. SSP Model Tube O.D. T (in) 0.25 0.25 0.38 0.38 Thread 7/16-20 9/16-18 9/16-18 3/4-16 Wt. 0.09 0.15 0.16 0.27 Price Each
C1GB86 ISSD4MEST4 C1GB87 ISSD4MEST6 C1GD11 ISSD6MEST6 C1GB94 ISSD6MEST8
MEST Male Connector Straight Thread O-Ring 90 Elbow

Catalog Part No. A (in) B (in) E (in) Price Each
SSP Model
Tube O.D. T (in) 0.25 0.38 0.50 0.63 0.75 1.00
Wt. 0.07 0.11 0.21 0.25 0.31 0.64
C1FP17 ISSD4U C1FP38 ISSD6U C1FP59 ISSD8U C1GF19 ISSD10U
1.61 1.03 0.19 1.77 1.19 0.28 2.02 1.22 0.41 2.05 1.25 0.50 2.11 1.31 0.62 2.55 1.59 0.88
U Union
C1FN88 ISSD12U C1FQ90 ISSD16U
Catalog Part No.
SSP Model
Tube Tube O.D. Tx O.D. T (in) (in) 0.38 0.50
Fluid Conveying
A (in)
B (in)
D (in)
Dx (in)
E (in)
Wt. 0.10 0.17
Price Each
C1FP37 ISSD6RU4 C1FP58 ISSD8RU6
0.25 1.70 1.12 0.66 0.60 0.19 0.38 1.91 1.22 0.90 0.66 0.28
RU Reducing Union
Tube A O.D. T (in) (in) Panel Max Panel Hole E Thickness Drill Dia (in) (in) (in) 0.40 0.44 29/64 37/64
Catalog Part No.
SSP Model
B (in)
Wt. 0.12 0.17
Price Each
C1FN91 ISSD4BU C1FP21 ISSD6BU
0.25 2.27 1.69 0.19 0.38 2.45 1.87 0.28
BU Bulkhead Union
897
Tube Fittings

Catalog Part No. SSP Model Tube O.D. T (in) 0.25 0.38 0.50 0.75 1.00 A (in) Bx (in) D (in) E (in) Wt. 0.10 0.16 0.29 0.47 0.95 Price Each
C1FP18 ISSD4UE C1FP39 ISSD6UE C1FP60 ISSD8UE C1FQ89 ISSD12UE C1HG39 ISSD16UE
1.06 0.77 0.60 0.19 1.20 0.91 0.66 0.28 1.42 1.02 0.90 0.41 1.57 1.17 0.96 0.62 1.93 1.45 1.23 0.88
UE Union Elbow
Catalog Tube O.D. T Part No. Catalog Part No. (in) C1GF21 ISSD4MBT2 C1GF22 ISSD4MBT4 C1GF26 C1KG11 ISSD6MBT6 ISSD12MBT12 C1GF30 ISSD8MBT8 0.25 0.25 0.38 0.50 0.75
Thread P 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14
A (in)
B (in)
E (in)
Wt. 0.12 0.14 0.30 0.43 1.38
Price Each
2.12 1.54 0.17 2.12 1.54 0.17 2.62 2.04 0.28 2.84 2.04 0.41 3.14 2.34 0.62
Fluid Conveying
MBT Male Branch Tee

Catalog Tube O.D. T Part No. Catalog Part No. (in) C1KG13 ISSD12MRT12 0.75 A (in) B (in) E (in) Price Each
Thread P 3/4-14
Wt. 0.70
3.02 2.62 0.62
MRT Male Run Tee
Catalog Part No.
SSP Model
Tube O.D. T A (in) (in) 0.25 0.38 0.50 0.75
Ax (in)
B (in)
Bx (in)
E (in)
Wt. 0.14 0.22 0.40 1.36
Price Each
C1FP19 ISSD4UT C1FP40 ISSD6UT
2.12 1.06 1.54 0.77 0.19 2.40 1.20 1.82 0.91 0.28 2.84 1.42 2.04 1.02 0.41 3.14 1.57 2.34 1.17 0.62
C1FP61 ISSD8UT C1KG14 ISSD12UT
UT Union Tee
898
Tube Fittings
Catalog Part No. Tube O.D. T A (in) Thread R (in) 0.25 0.38 0.50 0.75 1.00 7/16-20 9/16-18 3/4-16 B (in) D (in) E (in) Price Each
SSP Model
Wt. 0.06 0.09 0.17 0.30 0.75
C1FR25 ISSD4ANU4 C1FR32 ISSD6ANU6 C1GJ95 ISSD8ANU8 C1GJ89 ISSD12ANU12 C1KM60 ISSD16ANU16
1.48 1.19 0.60 0.17 1.56 1.27 0.66 0.28 1.81 1.41 0.90 0.39
1-1/16-12 2.10 1.70 0.96 0.61 1-5/16-12 2.42 1.94 1.23 0.84
ANU AN Union
Catalog Part No.
SSP Model
Tube O.D. T (in) 0.25 0.38 0.50 0.75
Thread R 7/16-20 9/16-18 3/4-16 1-1/16-12
B (in) 1.46 1.56 1.91 2.21
Wt. 0.03 0.05 0.10 0.23
Price Each
C1FR24 ISSD4ANA4 C1FR31 ISSD6ANA6 C1GJ94 ISSD8ANA8 C1GM27 ISSD12ANA12
ANA AN Adapter
Fluid Conveying
Catalog Part No.
SSP Model
Tube O.D. T (in) 0.25 0.38 0.50 0.75 1.00
A (in)
B (in)
D (in)
Wt. 0.04 0.07 0.13 0.21 0.44
Price Each
C1FN92 ISSD4CP C1FP22 ISSD6CP C1FP43 ISSD8CP C1JE68 ISSD12CP C1KG15 ISSD16CP
0.92 0.63 0.60 1.01 0.72 0.66 1.15 0.75 0.90 1.24 0.84 0.96 1.51 1.02 1.23
CP Cap
Catalog Part No. C1KG18 C1FP16 C1FP36 Price Each
SSP Model ISSD16P ISSD4P ISSD6P ISSD8P ISSD12P
Tube O.D. T (in) 0.25 0.38 0.50 0.75
G (in) 9/16 11/16 7/8 1-1/8
Wt. 0.31 0.03 0.04 0.09 0.14
P Plug
C1FP56 C1FN87
899
Tube Fittings

Catalog Part No. SSP Model Tube O.D. T (in) 0.25 0.38 0.50 0.63 0.75 1.00 G (in) 9/16 11/16 7/8 1 1-1/8 1-1/2 L (in) Wt. 0.50 0.56 0.69 0.69 0.69 0.81 0.02 0.03 0.05 0.07 0.07 0.22 Price Each
C1FP15 ISSD4N C1FP35 ISSD6N C1FP55 ISSD8N C1GG86 ISSD10N
N Nut
C1GM87 ISSD12N C1KG17 ISSD16N
Catalog Part No. C1FP26 ISSD6FF ISSD8FF ISSD12FF ISSD16FF C1FP46 C1GC88 C1GC93
SSP Model
Tube O.D. T (in) 0.38 0.50 0.75 1.00
Wt. 0.01 0.01 0.01 0.02
Price Each
FF Front Ferrule
Catalog Part No. C1FP41 ISSD8BF ISSD10BF ISSD12BF C1GC83 C1GC87
SSP Model
Tube O.D. T (in) 0.50 0.63 0.75 1.00
Wt. 0.01 0.01 0.01 0.01
Price Each
Fluid Conveying
BF Back Ferrule
C1GC92 ISSD16BF
Catalog Part No. C1FN96 ISSD4FS C1FP27 ISSD6FS C1FP47 ISSD8FS C1KF97 ISSD10FS C1KF99 ISSD12FS C1KM61 ISSD16FS
SSP Model
Tube O.D. T (in) 0.25 0.38 0.50 0.63 0.75 1.00
Wt. 0.01 0.01 0.01 0.02 0.01 0.01
Price Each
FS Ferrule Set
Note: Each Ferrule Set consists of 1 Front Ferrule (FF) and 1 Back Ferrule (BF).
900
Tube Fittings
Stainless Steel Metric Flareless Fittings
Catalog Part No.
Adaptall Model
Tube O.D. (mm) 6 8 12 16
Series Light Light Light Heavy
Thread Size (mm) M 12x1.5 M 14x1.5 M 18x1.5 M 24x1.5
Wt. 0.02 0.03 0.06 0.14
Price Each
C1FP71 SS9201L-06 C1FP72 SS9201L-08
SS9201 Tube Nut
C1FP74 SS9201L-12 C1GK68 SS9201S-16
Catalog Part No.
Adaptall Model
Tube O.D. (mm) 6 8 10 12 15
Wt. 0.01 0.01 0.01 0.01 0.01
Price Each
C1FP76 SS9202-06 C1FP77 SS9202-08
SS9202 Cutting Ring
C1FP78 SS9202-10 C1FP79 SS9202-12 C1FP80 SS9202-15
901
Tube Fittings
Brass Flare & Inverted Flare Nuts

Catalog Part No. Tube O.D. (in) 0.25 0.31 0.38 0.50 Price Each
Eaton Model
Thread 7/16-20 1/2-20 5/8-18 3/4-16
L (in) Wt. 0.94 1.12 1.31 1.62 0.03 0.04 0.06 0.09
C1HP82 41X4 C1HP83 41X5 C1HP84 41X6 C1HP85 41X8
41 Flare Nut (Long)

Catalog Part No. Model Number Tube O.D. (in) 0.63 Thread 7/8-14 L (in) Wt. 1.88 0.21 Price Each
C1BF78 241X10
241 Flare Nut (Long)

Tube O.D. (in) 0.38
Catalog Part No.
Eaton Model
Thread 5/8-18
L (in) Wt. 1.00 0.05
Price Each
C1HL59 1110X6
Fluid Conveying
1110 Flare Nut (Short)

Catalog Part No. Eaton Model Tube O.D. (in) 0.19 0.25 0.31 0.38 0.50 L (in) Wt. 0.56 0.56 0.62 0.66 0.74 0.01 0.01 0.02 0.03 0.05 Price Each
C1HL48 100X3 C1HL49 100X4 C1HL50 100X5 C1HL51 100X6 C1HL52 100X8
100 Inverted Flare Tube Nut
902
Tube Fittings
Brass Compression Fittings - Plastic, Copper & Aluminum Tubing
Brass Compression Tube Fittings Used with Plastic, Copper & Aluminum Tubing
Typical Application: Instrumentation, hydraulic and pneumatic systems. For your particular application, please review the Important Safety Information starting on page 1365 Pressure: Working pressure up to 2000 psi with a 4:1 safety factor depending on tube size. When using plastic tubing, use the working pressure for type used. Vibration: Fair resistance - use long nut when greater vibration resistance is needed. Temperature Range: -65F to +250F with metal tubing. When using a compatible plastic tubing do not exceed the tubing temperature range. (Refer to tubing temperature range.) Material: CA360 Brass. Used With: Aluminum, copper and plastic tubing. Plastic tubing, except for Eaton PT230, requires the 2030 insert. Not recommended for steel tubing. Features: Low cost. Easy to assemble, no flaring. Available with long or short nut. Broad selection of styles and sizes. Conformance: Meets specifications and standards of ASA, ASME and SAE. Listed by Underwriters Laboratories (available on special order) for flammable liquids. Assembly Instructions: 1. Cut tubing to desired length. 2. Slide nut and then sleeve on tube. Threaded end A of nut must face toward fitting. 3. Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder. 4. Lubricate threads and assemble nut to fitting body. 5. Tighten nut hand tight. From that point, tighten with a wrench the following number of turns past hand tight, by Tube Size: 1/8 thru 1/4 (1-1/4 turns), 5/16 (1-3/4 turns), 3/8 thru 1 (2-1/4 turns).
Catalog Part No. C1KJ55 Eaton Model 2030X44 Tube O.D. (in) A (in) B (in) C (in) D (in) 1/4 1/4 5/16 3/8 1/2 5/8 1/8 3/16 1/4 3/8 1/2 3/32 11/64 19/32 7/32 17/32 5/8 5/32 15/64 11/64 9/64 Wt. 0.00 0.30 0.01 0.01 0.01 0.01 Price Each
C1HN64 2030X4 C1HN65 2030X5
2030 Tube Support for Plastic Tubing
C1HN66 2030X6 C1HN67 2030X8 C1HN63 2030X10
7/32 11/32 41/64 11/32 7/16 13/16 29/64 35/64 13/16
903
Tube Fittings

Catalog Part No. C1HQ65 60X2 C1HQ66 60X3 C1HQ67 60x4 Eaton Model Tube O.D. (in) D (in) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 0.13 0.19 0.26 0.32 0.38 0.51 0.63 F (in) 0.19 0.27 0.34 0.41 0.47 0.59 0.72 L (in) 0.19 0.22 0.25 0.25 0.25 0.38 0.38 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
60 Compression Sleeve
C1HQ68 C1HQ69
60X5 60X6
C1HQ70 60X8 C1HQ64 60X10
Catalog Part No. C1HQ74 61X2 C1HQ75 61X3 C1HQ76 61X4 C1HQ77 61X5 C1HQ78 61X6 C1HQ79 61X8
Eaton Model
Tube O.D. (in) C (in) 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/8 7/16 1/2 9/16 5/8 13/16 15/16
D (in) L (in) Wt. 0.13 0.19 0.26 0.32 0.38 0.51 0.63 0.38 0.41 0.44 0.44 0.47 0.62 0.62 0.01 0.01 0.01 0.02 0.02 0.05 0.05
Price Each
61 Nut
C1HQ73 61X10
Fluid Conveying
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/8 3/16 1/4 5/16 3/8 1/2 5/8
L (in) Wt. 0.66 0.76 0.79 0.88 0.97 1.10 1.25 0.03 0.04 0.05 0.06 0.08 0.16 0.20
Price Each
C1HQ82 62X2 C1HQ83 62X3 C1HQ84 C1HQ86 C1HQ87 62X4 62X6 62X8 C1HQ85 62X5
62 Union
C1HQ81 62X10
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 1/2-14
L (in) Wt. 0.78 0.84 0.88 1.06 0.91 1.09 0.97 1.17 1.16 1.34 1.22 1.22 1.41 1.50 0.02 0.04 0.04 0.06 0.04 0.06 0.05 0.06 0.09 0.12 0.11 0.11 0.18 0.18
Price Each
C1HR15 68X2 C1HR16 68X3 C1HR17 C1HR18 C1HR19 68X4 68X4X4 68X5
68 Male Connector
C1HR20 68X5X4 C1HR22 68X6X2 C1HR21 C1HR23 68X6 68X6X6
C1HR24 68X6X8 C1HR26 68X8X4 C1HR25 68X8 C1HR27 68X8X8 C1HR14 68X10
904
Tube Fittings
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/8 3/16 1/4 1/4 3/8 1/2
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18
L (in) Wt. 0.75 0.78 0.78 1.03 1.06 1.12 0.04 0.04 0.05 0.07 0.08
Price Each
C1HQ95 66X2 C1HQ96 66X3 C1HQ97 66X4 C1HQ98 66X4X4 C1HQ99 66X6 C1HR11 66X8
66 Female Connector
0.12
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 1/2-14
M (in)
N (in)
Wt. 0.04 0.05 0.06 0.09 0.06 0.08 0.07 0.09 0.12 0.20 0.16 0.18 0.32 0.31
Price Each
C1HR30 69X2 C1HR31 69X3 C1HR32 69X4 C1HR33 69X4X4 C1HR34 69X5 C1HR35 69X5X4
0.60 0.67 0.62 0.69 0.62 0.75 0.62 0.75 0.62 0.75 0.69 0.84 0.69 0.69 0.75 0.94 0.84 0.94 1.06 1.12 0.84 0.94 0.94 1.12 0.94 1.31 1.06 1.31
69 90 Male Elbow
C1HR37 69X6X2 C1HR36 69X6 C1HR38 69X6X6 C1HV40 69X6X8 C1HR40 69X8X4 C1HR39 69X8 C1HR41 69X8X8 C1HR29 69X10
Catalog Part No.
Eaton Model
Tube O.D. (in) 3/8
M (in) 0.73
Wt. 0.11
Price Each
C1HQ92 65X6
65 90 Union Elbow
905
Tube Fittings

Catalog Part No. Eaton Model Tube O.D. (in) 1/4 3/8 M (in) 0.60 0.73 Wt. 0.10 0.15 Price Each
C1HQ88 64X4 C1HQ89 64X6
64 Union Tee
Catalog Part No. Eaton Model Tube O.D. (in) 1/4 Thread P 1/4-18 M (in) N (in) Wt. 0.13 Price Each
C1HR45 72X4X4X4
0.78 0.85
72 Male Branch Tee
Fluid Conveying
906
Tube Fittings
Brass Compression Fittings - Copper & Aluminum Tubing
Design Features: Low cost. No flaring required. Easy to assemble. Applications: Air, oil and water. Suitable for vacuum service. For your particular application, please review the Important Safety Information starting on page 1365 Construction: Brass. Working Pressure: 1/8 to 1/4 tubing sizes: 500 PSI with 4:1 safety factor (2000 PSI burst). 5/16 to 1/2 tubing sizes: 250 PSI with 4:1 safety factor (1000 PSI burst). 3/4 to 1 tubing sizes: 188 PSI with 4:1 safety factor (750 PSI burst). Operating Temperature Range: -65F to 250F. Tubing: For use with copper & aluminum tubing. Not recommended for steel tubing.
Catalog Part No. Model Number Tube O.D. (in) 0.75 L (in) Wt. 0.44 0.01 Price Each
Fluid Conveying
C1BH71 260X12
260 Sleeve
Model Number
Tube O.D. (in) 0.75
L (in) Wt. 0.69 0.08
C1BH79 261X12
261 Nut
Catalog Part No. C1BJ94 Model Number 295X3 Tube O.D. (in) A (in) B (in) C (in) D (in) 0.19 0.19 0.09 0.11 0.51 Wt. 0.05 Price Each
295 Insert
907
Tube Fittings
Brass Compression Fittings - Copper & Aluminum Tubing

Catalog Part No. C1BJ33 Tube O.D. (in) 0.75 Price Each
Model Number 268X12X12
Pipe Thread 3/4-14
L (in) Wt. 1.50 0.30
268 Male Connector (261 Nut and 260 Sleeve included)

Tube O.D. (in) 0.31
Catalog Part No.
Model Number
Pipe Thread 1/4-18
L (in) Wt. 2.00
Price Each
C1EN25 266X5X4
266 Female Connector (261 Nut and 260 Sleeve included)
Fluid Conveying
908
Tube Fittings
Brass DOT Approved Air Brake - Nylon Air Brake Tubing
Brass Air Brake Tube Fittings Used with Nylon Air Brake Tubing
Typical Application: Air brake systems except where temperatures exceed +200F or where battery acid can drip on tubing. For your particular application, please review the Important Safety Information starting on page 1365 Pressure: Maximum operating pressure of 150 psi. Vibration: Fair resistance. Temperature Range: -40F to +200F. Material: CA360 Brass. Used With: NT100 Nylon Tubing - SAE J844 Type A and B. Features: Easy to assemble (no tube preparation or flaring required.) Built in tube support. Conformance: Meets specifications and standards of SAE and DOT FMVSS 571.106. Assembly Instructions: 1. Cut tubing to desired length. 2. Slide nut and then sleeve on tubing. Threaded end of nut A must face toward fitting body. 3. Insert tubing into the preassembled fitting. Be sure tubing is bottomed in fitting. 4. Tighten nut to following torque based on Tube Size: 1/4 (85 to 115 in.lbs), 3/8 (12 to 17 ft.lbs), 1/2 (25 to 33 ft.lbs), 5/8 (26 to 35 ft.lbs), 3/4 (38 to 50 ft.lbs). A gauge ring also assures installation to specification. Disassembly: Remove nut and pull tubing out of fitting body. Insert will remain in tubing. Reassembly: Push tubing and insert into fitting body until it bottoms. Thread nut onto fitting body and torque as in Step 4.
Catalog Part No. C1HM72 1460X4 C1HM73 1460X6 C1HM74 1460X8 C1HM71 1460X10 Eaton Model Tube O.D. (in) C (in) 1/4 3/8 1/2 5/8 0.359 0.479 0.625 0.745 D (in) L (in) Wt. 0.256 0.30 0.384 0.39 0.509 0.43 0.635 0.48 0.01 0.01 0.01 0.01 Price Each
1460 Sleeve (Ref SAE 100115)
Catalog Part No. C1HM76 1461X4 C1HM77 1461X6 C1HM78 1461X8
Eaton Model
Tube O.D. C (in) (in) 1/4 3/8 1/2 5/8 9/16 5/8 13/16 15/16
D (in) L (in) Wt. 0.256 0.45 0.384 0.63 0.509 0.72 0.634 0.77 0.02 0.03 0.05 0.06
Price Each
C1HM75 1461X10
1461 Nut (Ref SAE 100110)
909
Tube Fittings
Brass DOT Approved Air Brake - Nylon Air Brake Tubing

Catalog Part No. Eaton Model Tube O.D. (in) 1/4 3/8 1/2 5/8 L (in) Wt. 0.85 1.10 1.31 1.43 0.07 0.10 0.19 0.25 Price Each
C1HM80 1462X4 C1HM81 1462X6 C1HM82 1462X8 C1HM79 1462X10
1462 Union (Ref SAE 100101BA)

Catalog Part No. C1JA99 C1JB11 C1JB12 Eaton Model 1468X4X4 1468X6 1468X6X6 Tube O.D. (in) 1/4 1/4 3/8 3/8 3/8 1/2 1/2 5/8 5/8 Male Pipe Thread 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 3/8-18 1/2-14 L (in) Wt. 0.88 1.09 1.20 1.23 1.42 1.32 1.51 1.38 1.57 0.03 0.07 0.08 0.11 0.13 0.13 0.20 0.17 0.20 Price Each
C1HM85 1468X4
C1JB13 1468X6X8 1468 Male Connector (Ref SAE 100102BA) C1JB14 1468X8 C1JB19 C1JA57 C1JA56 1468X8X8 1468X10X6 1468X10
Fluid Conveying
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/4 1/4 3/8 3/8 3/8 1/2 1/2 5/8 5/8
Male Pipe Thread 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 3/8-18 1/2-14
M (in)
N (in)
Wt. 0.06 0.08 0.10 0.14 0.19 0.20 0.26 0.26 0.30
Price Each
C1HH67 1469X4 C1HH68 1469x4x4 C1HH83 1469X6 C1HJ23 1469X6X6 C1JB26 1469X6X8 1469X8 C1JB31
0.63 0.67 0.69 0.88 0.80 0.93 0.85 0.92 0.95 1.11 0.94 1.00 1.04 1.19 1.01 1.06 1.10 1.25
C1JB32 1469X8X8 1469 90 Male Elbow (Ref SAE 100202BA) C1JB20 1469X10X6 C1HM87 1469X10
910
Tube Fittings
Brass SSP Duolok Tube Fittings (Swagelok Interchange)
SSP Duolok Brass Tube Fittings (Swagelok Interchange)
Features: Duolok tube fittings provide a reliable, leak-proof connection in instrumentation and process tubing systems. The double ferrule design compensates for the variations in tubing materials, hardness and thickness of the tube wall to provide leak-tight connections in an extensive range of applications. Materials: Straight fittings are machined from CA360 and CA345 premium brass bar stock in accordance with ASTM B-16 and ASTM B-453. Shaped bodies are machined from precision forgings of CA-377 brass in accordance with ASTM B-124. Pressure Ratings: Generally, Duolok tube fittings are rated for pressures equal to the maximum allowable working pressures of the tubing recommended for use with the fittings (copper tubing). Some specially designed fittings, bored-through fittings, AN fittings, O-Ring Seal fittings and SAE integral end fittings may have a lower pressure rating than that of the tubing. Contact us for application assistance. Temperature Factors: Duolok tube fittings function reliably in an extremely wide range of operating temperatures. Elevated temperatures will reduce the maximum working pressure capability of the tubing system. For applications at elevated temperatures, contact us for application assistance. Gageability: Duolok tube fittings are designed, manufactured and quality controlled to be gaugeable for sufficient pull-up during initial installation. Contact us for detailed assembly instructions. Interchangeability: Duolok tube fittings are designed, manufactured and quality controlled to be totally interchangeable with the Swagelok brand of tube fittings. Tubing Selection: Copper Tubing. Assembly Instructions & Technical Information: page 1159 Also, please review the Important Safety Information starting on page 1365
Panel Tube Max Panel Hole A Thickness Drill Dia O.D. T (in) Thread P (in) (in) (in) 0.25 1/4-18 2.10 0.40 0.45
SSP Model ISSD4BMC4
Wt. 0.13
Price Each
BMC Bulkhead Male Connector
911
Tube Fittings
Brass SSP Duolok Tube Fittings (Swagelok Interchange)

Catalog Part No. SSP Model Tube O.D. T (in) 0.38 A (in) B (in) E (in) Wt. 0.12 Price Each
C1FN73 IBD6U
1.77 1.19 0.28
U Union
Catalog Part No. Tube O.D. T A (in) (in) 0.38 Ax (in) B (in) Bx (in) E (in) Price Each
SSP Model
Wt. 0.23
C1FN75 IBD6UT
2.40 1.20 1.82 0.91 0.28
UT Union Tee
Catalog Part No. SSP Model Tube O.D. T (in) 0.25 0.38 A (in) B (in) D (in) Wt. 0.05 0.07 Price Each
Fluid Conveying
C1FN50 IBD4CP C1FN65 IBD6CP
0.92 0.63 0.60 1.01 0.72 0.66
CP Cap Miscellaneous Products
Catalog Part No. C1FN59 C1FN71
SSP Model IBD4P IBD6P
Tube O.D. T (in) 0.25 0.38
G (in) 9/16 11/16
Wt. 0.03 0.05
Price Each
P Plug
912
Tube Fittings
Brass Push > Connect Tube Fittings - Nylon & Polyethylene Tubing
Push > Connect Brass Tube Fittings Used with Nylon & Polyethylene Tubing
Typical Application: Compressed pneumatic instrumentation, circuit, lubricant and cooling lines. For your particular application, please review the Important Safety Information starting on page 1365 Pressure: Up to 250 psi depending on tube size. Fittings rated at 29.5 inches of mercury vacuum. Sealing Method: O-Ring of Buna-N Construction. (Viton available on request by special order.) Temperature Range: -40F to 200F for these fittings. Also need to take into account when using a compatible plastic tubing, do not exceed the tubing temperature range. (Refer to tubing temperature range). Material: Brass, Nickel Plated. Used With: PT230 and TP160 nylon, and PT240 Polyethylene tubing. Features: Ease of assembly. No tools required, reusability of fittings and the time savings of assembly and disassembly. Assembly Instructions: 1. To connect, simply push the tubing into the fitting. 2. To disconnect, depress the collet ring with two fingers and withdraw.
Catalog Part No. C1HL63 1162X2 C1HL64 1162X2.5 C1HL65 1162X4 C1HY44 1162X5 C1HL67 C1HL69 1162X6 1162X8 Eaton Model Tube O.D. N (in) L (in) (in) 1/8 5/32 1/4 5/16 3/8 1/2 1.26 0.59 1.18 0.55 1.40 0.64 1.23 0.69 1.67 0.79 1.75 0.83 Wt. 0.03 0.02 0.04 0.05 0.09 0.09 Price Each
1162 Union
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/4 3/8 1/2
B (in) M14 x 1 M18 x 1 M20 x 1
L (in) 1.40 1.67 1.75
Max (in) 0.37 0.47 0.53
Wt. 0.06 0.12 0.12
Price Each
C1HM64 1174X4 C1HM65 1174X6 C1HM66 1174X8
1174 Bulkhead Union
913
Tube Fittings
Catalog Part No. Eaton Model Tube O.D. (in) 1/4 F (in) L (in) Wt. 0.96 1.52 0.06 Price Each
C1HL57 1107X4
1107 Union "Y"

Catalog Part No. Eaton Model Tube O.D. (in) 1/8 1/8 5/32 5/32 5/32 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 Male Pipe Thread 10-32 UNF thread 1/8-27 10-32 UNF thread 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 3/8-18 1/2-14 L (in) Wt. 0.85 0.85 0.81 0.81 0.94 0.98 1.08 1.10 1.14 1.14 1.38 1.38 1.18 1.36 1.36 0.01 0.02 0.01 0.02 0.04 0.02 0.04 0.08 0.04 0.04 0.06 0.07 0.08 0.08 0.10 Price Each
C1HL99 1168X2A C1HL95 1168X2 C1HL97 1168X2.5A C1HL96 1168X2.5 C1HL98 1168X2.5X4 C1HM11 C1HM16 1168X4 1168X4X6 C1HM15 1168X4X4 C1HY48 1168X5
1168 Male Connector
Fluid Conveying
C1HY49 1168X5X4 C1HM20 1168X6X2 C1HM17 C1HM21 C1HM22 1168X6 1168X6X6 1168X8
C1HM25 1168X8X8
Note: Models with Z suffix have sealant on threads.
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/4
Thread P 1/8-27
F (in) L (in) Wt. 0.46 1.06 0.05
Price Each
C1HL87 1166X4
1166 Female Connector Indexes & Technical Information
914
Tube Fittings
Catalog Part No. Eaton Model Tube O.D. (in) 1/4 5/16 3/8 1/2 M F (in) (in) 0.50 0.91 0.59 0.98 0.69 1.12 0.77 1.22 Wt. 0.04 0.06 0.10 0.11 Price Each
C1HL83 1165X4 C1HY46 1165X5 C1HL84 1165X6 C1HL85 1165X8
1165 Union Elbow

Catalog Part No. Eaton Model Tube O.D. (in) 1/4 3/8 Thread P 1/8-27 1/4-18 E M (in) F (in) (in) 0.53 0.50 0.91 0.69 0.69 1.12 Wt. 0.04 0.08 Price Each
C1HM34 1169X4 C1HM40 1169X6
1169 Male Elbow

Catalog Part No. Tube O.D. (in) 1/8 5/32 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 E M (in) F (in) (in) 0.71 0.39 0.83 0.71 0.39 0.79 0.73 0.50 0.91 0.81 0.50 0.91 0.87 0.50 0.93 0.77 0.59 0.98 0.85 0.59 0.98 0.75 0.64 1.10 0.89 0.69 1.12 0.91 0.69 1.12 0.95 0.77 1.22 0.95 0.77 1.22 1.12 0.77 1.22 Price Each
Fluid Conveying
Eaton Model
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 3/8-18 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/4-18 3/8-18 1/2-14
Wt. 0.04 0.03 0.04 0.40 0.06 0.09 0.05 0.07 0.09 0.09 0.12 0.10 0.12 0.16
C1HM33 1169X2S C1HM30 1169X2.5AS C1HM31 1169X2.5S C1GH24 1169X4S C1HM38 1169X4X4S C1HM39 1169X4X6S
5/32 10-32 UNF thread 0.53 0.39 0.79
1169S Swivel Male Elbow
C1HY51 1169X5S C1HY52 1169X5X4S C1HM44 1169X6X2S C1HM43 C1JB97 1169X6S 1169X6X6S
C1HM49 1169X8X4S C1HM48 1169X8S C1HM50 1169X8X8S
Note: Models with Z suffix have sealant on threads. Catalog Part No. M F (in) L (in) (in) 0.39 1.65 0.83 0.39 1.57 0.79 0.50 1.81 0.91 0.59 1.97 0.98 0.69 2.24 1.12 0.77 2.44 1.22 Price Each
Eaton Model
Tube O.D. (in) 1/8 5/32 1/4 5/16 3/8 1/2
Wt. 0.04 0.04 0.06 0.09 0.15 0.15
C1HL73 1164X2 C1HL74 1164X2.5 C1HL75 1164X4 C1HY45 1164X5 C1HL77 1164X6 C1HL79 1164X8
1164 Union Tee
915
Tube Fittings
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/4 1/4 3/8
Thread P 1/8-27 1/4-18 3/8-18
M F (in) L (in) (in) 0.46 1.69 0.89 0.46 1.79 0.89 0.64 2.26 1.10
Wt. 0.06 0.08 0.16
Price Each
C1HM54 1171X4S C1HM55 1171X4X4S C1HM56 1171X6X6S
1171S Swivel Male Run Tee

Catalog Part No. C1GH25 Tube O.D. (in) 1/8 1/4 1/4 3/8 1/2 Price Each
Fluid Conveying
Eaton Model 1172X4S
Thread P 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18
F (in) L (in) Wt. 0.35 1.57 0.46 1.77 0.46 1.77 0.64 2.20 0.72 2.40 0.06 0.07 0.08 0.14 0.16
C1HM58 1172X2S C1HM93 1172X4X4S C1HN52 1172X6S C1HM60 1172X8S
1172S Swivel Male Branch Tee
916
Tube Fittings
Brass Push-In Tube Fittings - Polyethylene & Nylon Tubing
Application: For your particular application, please review the Important Safety Information starting on page 1365 Design Features: Quick connect & disconnect. Positive seal, no leaks. Pre-applied Teflon based pipe sealant on all male threads. Choice of stationary or swivel elbows and tees. Interior hex in straight connectors for Allen key tightening. Full flow design. Construction: Brass construction (Elbows and tees are forged brass). Buna-N O-rings are standard. Working Pressure: Suitable for use up to the maximum working pressure of the thermoplastic tubing used. Suitable for vacuum service. Operating Temperature Range: -10F to 200F. Tubing: Polyethylene Tubing page 872 Polyurethane Tubing (90 durometer and over), Polybutylene Tubing and soft metal tubing. How It Works: When tubing (1) is inserted into the fitting, it first passes through the gripping teeth (2). Just beyond the gripping teeth is the o-ring (3) which provides the leak proof seal against the O.D. of the tube. The gripping teeth grab the tube, which expands the insert. Pulling back on the tube only tightens the grip as the insert moves into the camming surface (4). Pressure through the tube also serves to tighten the grip. The tube bottoms against a positive stop (5) in a cavity providing tube support to prevent leakage.
Catalog Part No. C1FJ14 Tube O.D. (in) 0.13 0.19 A (in) B (in) D (in) Price Each
Fluid Conveying
Alkon Model AQ68-P-2X1
Pipe Thread 1/16 1/8-18
Wt. 0.02 0.03
0.81 0.73 0.09 1.04 0.90 0.16
C1CJ87 AQ68-P-3X2
Note: Internal hex "D" can be used for tightening with an Allen key.
AQ68-P Male Connector
Catalog Part No.
Alkon Model
Tube O.D. (in) 0.19 0.38
Pipe Thread 1/8-27 1/4-18
A (in)
B (in)
D (in)
Wt. 0.05 0.11
Price Each
C1CK23 AQ69-PS-3X2
0.89 0.75 1.17 1.08 0.94 1.45
AQ69-PS Swivel Male Elbow
C1CK31 AQ69-PS-6X4
917
Tube Fittings
Brass Push-In Tube Fittings - Polyethylene & Nylon Tubing

Catalog Part No. Tube O.D. (in) 0.38 A (in) B (in) D (in) Price Each
Alkon Model
Pipe Thread 1/4-18
Wt. 0.08
C1CK39 AQ71-PS-6X4
1.08 0.94 1.45
AQ71-PS Swivel Male Run Tee

Catalog Part No. Alkon Model Tube O.D. (in) 0.25 0.38 Pipe Thread 1/4-18 1/4-18 A (in) B (in) D (in) Wt. 0.10 0.12 Price Each
C1CK50 AQ72-PS-4X4 C1CK51 AQ72-PS-6X4
1.04 0.91 1.33 1.10 0.97 1.45
AQ72-PS Swivel Male Branch Tee

Catalog Part No. Alkon Model Tube O.D. (in) Pipe Thread 0.38 1/4-18 A (in) 1.89 Thread C 5/8-18 D (in) 0.99 Wt. 0.13 Price Each
Fluid Conveying
C1CK59 AQ86-P-6X4
AQ86-P Female Bulkhead Union
918
Tube Fittings
Brass Push Tube Fittings
Catalog Part No. C1LC17 C1LC14 C1LC16 Tube O.D. Numatics Model (T) INB100-532-000 INB100-104-000 INB100-516-000 INB100-308-000 INB100-102-000 5/32 1/4 5/16 3/8 1/2 Price Each
D 0.394 0.394 0.591 0.709 0.787
D1 0.094 0.118 0.236 0.276 0.413
L 0.984 1.024 1.299 1.398 1.575
H 0.472 0.492 0.630 0.669 0.748
Wt.
INB100 Union
C1LC15 C1LC13
Tube Catalog O.D. Thread Part No. Numatics Model (T) (F) C1LC21 C1LC22 C1LC23 INB103-104-020 INB103-104-021 INB103-104-022 INB103-102-021 INB103-102-022 INB103-102-023 1/4 1/4 1/4 1/2 1/2 1/2
D1
D2
L1
Price Wt. Each
1/8 0.472 0.551 0.886 0.374 0.531 NPTF 1/4 0.472 0.551 1.024 0.512 0.531 NPTF 3/8 NPTF 0.472 0.709 1.024 0.512 0.531 1/4 NPTF 0.827 0.906 1.339 0.512 0.748 3/8 NPTF 0.827 0.906 1.339 0.512 0.748 1/2 NPTF 0.827 0.906 1.496 0.709 0.748
INB103 Male Connector
C1LC18 C1LC19 C1LC20
Fluid Conveying
Catalog Part No. C1LC28 C1LC25 C1LC27 C1LC26 C1LC24
Tube O.D. Numatics Model (T) INB106-532-000 INB106-104-000 INB106-516-000 INB106-308-000 INB106-102-000 5/32 1/4 5/16 3/8 1/2
D 0.394 0.472 0.591 0.709 0.827
D1 0.118 0.157 0.236 0.295 0.413
L 0.657 0.740 0.858 1.004 1.161
H 0.492 0.531 0.630 0.669 0.748
Wt.
Price Each
INB106 Union Elbow
919
Tube Fittings

Tube Catalog O.D. Thread Part No. Numatics Model (T) (F) C1LC33 C1LC34 C1LC29 INB107-532-020 5/32 INB107-532-021 5/32 INB107-104-020 INB107-104-021 INB107-308-022 INB107-308-021 1/4 1/4 3/8 3/8 1/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT Price Wt. Each
D1
L1
L2
0.394 0.118 0.657 0.650 0.374 0.394 0.118 0.657 0.787 0.512 0.472 0.157 0.740 0.693 0.531 0.472 0.157 0.740 0.831 0.531 0.709 0.295 1.004 0.945 0.685 0.709 0.295 1.004 1.945 0.685
INB107 Fixed Elbow
Tube Catalog O.D. Thread Part No. Numatics Model (T) (F) C1LC37 INB109-104-020 INB109-104-021 INB109-104-022 INB109-102-022 INB109-102-023 1/4 1/4 1/4 1/2 1/2 1/8 NPT 1/4 NPT 3/8 NPT 3/8 NPT 1/2 NPT
D1
L1
L2
Price Wt. Each
0.472 0.157 0.740 0.906 0.374 0.472 0.236 0.740 1.031 0.512 0.472 0.236 0.740 1.071 0.512 0.827 0.315 1.181 1.299 0.512 0.827 0.315 1.181 1.476 0.709
Fluid Conveying
C1LC38 C1LC39
INB109 Swivel Elbow
C1LC35 C1LC36
Catalog Part No. C1LC44 C1LC41 C1LC43 C1LC42
Tube O.D. Numatics Model (T) INB110-532-000 INB110-104-000 INB110-516-000 INB110-308-000 INB110-102-000 5/32 1/4 5/16 3/8 1/2
D 0.394 0.472 0.591 0.709 0.827
D1 0.118 0.157 0.236 0.295 0.413
L 0.657 0.740 0.858 1.004 1.161
H 0.492 0.531 0.630 0.669 0.748
Wt.
Price Each
INB110 Union Tee
C1LC40
920
Tube Fittings
Tube Catalog O.D. Thread Part No. Numatics Model (T) (F) C1LC47 C1LC48 INB116-104-020 INB116-104-021 INB116-104-022 INB116-102-022 INB116-102-023 1/4 1/4 1/4 1/2 1/2 1/8 NPT 1/4 NPT 3/8 NPT 3/8 NPT 1/2 NPT Price Wt. Each
D1
L1
L2
0.472 0.157 0.740 0.996 0.374 0.472 0.236 0.740 1.142 0.512 0.472 0.236 0.740 1.181 0.512 0.827 0.315 1.181 1.299 0.512
INB116 Swivel Run Tee
0.827 0.315 1.181 1.476 0.709
Catalog Part No. C1LC12 C1LB98
Numatics Model IN118-532-000 IN118-104-000 IN118-516-000 IN118-308-000 IN118-102-000
T 5/32 1/4 5/16 3/8 1/2
D 0.236 0.315 0.394 0.472 0.591
L 0.906 0.984 1.063 1.102 1.260
Wt.
Price Each
IN118 Plug
C1LC11 C1LB99 C1LB97
Fluid Conveying
Catalog Part No. Numatics Model C1LC52 C1LC53 INB121-104-532 INB121-308-104 INB121-102-104 INB121-102-308
T 1/4 3/8 1/2 1/2
T1 5/32 1/4 1/4 3/8
D 0.394 0.472 0.472 0.669
D1 0.118 0.157 0.157 0.295
L 1.142 1.339 1.417 1.673
H 0.492 0.531 0.531 0.669
Price Wt. Each
INB121 Reducer
C1LC50 C1LC51
Catalog Part No. Numatics Model C1LC55 C1LC54 INB131-532-000 INB131-104-000
Tube O.D. (T) 5/32 1/4
L 1.280 1.398
H 0.492 0.531
L1 0.512 0.598
D 0.394 0.472
D1 0.118 0.157
Price Wt. Each
INB131 Union Y
921
Tube Fittings
Brass Push > Connect Metric Tube Fittings - Metric Nylon & Polyethylene Tubing
Push > Connect Brass Tube Fittings Used with Metric Nylon & Polyethylene Tubing
Fluid Conveying
Typical Application: Compressed pneumatic instrumentation, circuit, lubricant and cooling lines. For your particular application, please review the Important Safety Information starting on page 1365 Pressure: Up to 250 psi depending on tube size. Fittings rated at 29.5 inches of mercury vacuum. Sealing Method: O-Ring of Buna-N Construction. (Viton available on request by special order.) Temperature Range: -40F to 200F for these fittings. Also need to take into account when using a compatible plastic tubing, do not exceed the tubing temperature range. (Refer to tubing temperature range). Material: Brass, Nickel Plated. Features: Ease of assembly. No tools required, reusability of fittings and the time savings of assembly and disassembly. Assembly Instructions: 1. To connect, simply push the tubing into the fitting. 2. To disconnect, depress the collet ring with two fingers and withdraw.
Catalog Part No. C1HL66 1162X4M C1HL68 1162X6M C1HL70 1162X8M C1HL61 1162X10M Eaton Model Tube O.D. L N (mm) (mm) (mm) Wt. 4 6 8 10 12 30.0 14.0 34.0 15.5 38.0 17.5 41.5 19.5 44.5 21.0 0.02 0.04 0.05 0.08 0.10 Price Each
1162M Union
C1HL62 1162X12M
Catalog Part No.
Eaton Model
Tube O.D. (mm) 4 4 6 6 8 8 10 10 12 12
BSP Thread Size D 1/8-28 1/4-19 1/8-28 1/4-19 1/4-19 3/8-19 1/4-19 3/8-19 3/8-19 1/2-14
F L (mm) (mm) Wt. 8.8 8.8 9.8 18.0 19.5 20.0 0.02 0.03 0.02 0.03 0.03 0.06 0.06 0.06 0.08
Price Each
C1HM13 1168X4MX2PT C1HM14 1168X4MX4PT C1HM18 1168X6MX2PT C1HM19 1168X6MX4PT
11.7 20.5 13.7 24.0 13.7 23.5 16.3 28.5 16.3 25.5 18.3 30.5 18.3 27.0
1168MPT Male Connector (Universal BSPT/BSPP)
C1HM23 1168X8MX4PT C1HM24 1168X8MX6PT C1HL91 1168X10MX4PT C1HL92 1168X10MX6PT C1HL93 1168X12MX6PT C1HL94 1168X12MX8PT
922
Tube Fittings
Brass Push > Connect Metric Tube Fittings - Metric Nylon & Polyethylene Tubing
Catalog Part No. Tube O.D. (mm) 4 6 6 8 8 10 10 12 12 BSPT Thread Size D 1/8-28 1/8-28 1/4-19 1/4-19 3/8-19 1/4-19 3/8-19 3/8-19 1/2-14 E F M (mm) (mm) (mm) Wt. 14.5 10.0 20.0 15.0 12.7 22.0 15.0 12.7 22.5 16.0 15.0 25.0 16.5 15.0 25.0 18.5 17.5 28.5 19.0 17.5 28.5 20.0 19.5 31.0 20.5 19.5 31.0 0.04 0.04 0.05 0.06 0.09 0.08 0.11 Price Each
Eaton Model
C1HM35 1169X4MX2PTS C1HM41 1169X6MX2PTS C1HM42 1169X6MX4PTS C1HM46 1169X8MX4PTS C1HM47 1169X8MX6PTS C1HM26 1169X10MX4PTS
1169MPTS Swivel Male Elbow (Universal BSPT/BSPP)
C1HM27 1169X10MX6PTS C1HM28 1169X12MX6PTS C1HM29 1169X12MX8PTS
0.12 0.15
Catalog Part No.
Eaton Model
Tube O.D. (mm) 4 6 8 10
F L M (mm) (mm) (mm) Wt. 10.0 40.0 20.0 12.7 45.0 22.5 15.0 50.0 25.0 17.5 57.0 28.5 0.04 0.06 0.09 0.14
Price Each
C1HL76 1164X4M C1HL78 1164X6M C1HL80 1164X8M C1HL71 1164X10M
Fluid Conveying
1164M Union Tee
923
Tube Fittings
Brass Quick > Connect Air Brake - Nylon Air Brake Tubing
Quick > Connect Brass Air Brake Tube Fittings Used with Nylon Air Brake Tubing
Fluid Conveying
Typical Application: Air brake systems except where temperatures exceed +200F or where battery acid can drip on tubing. Not for fuel, water or oil. For your particular application, please review the Important Safety Information starting on page 1365 Pressure: Vacuum to 150 psi. Vibration: Moderate vibration resistance. Temperature Range: -40F to +200F. Material: CA360 Brass (Body & Collet). EP (Ethylene Propylene) - O-ring. Nylon Air Brake Tubing: Features: Easy, fast assembly, one-piece fitting, reusable field serviceable. Conformance: Meets D.O.T. FMVSS 571.106 and SAE J1131 air brake system performance requirements. Assembly Instructions: 1. Using a tube cutter, make a square cut edge (maximum 15 cutting angle allowed). 2. Insert tubing straight into fitting until a solid stop is felt. The tubing grip and seal (on O-ring) is now accomplished. 3. Gently tug on tubing to ensure tubing is secure. Disassembly: 1. Check to be sure there isnt any air pressure. 2. Depress collet head using fingers or Eaton tube release tool to release grip on tubing. 3. With the collet depressed, pull the tubing from the fitting.
Catalog Part No. C1HM96 C1HM97 C1HM98 Eaton Model 1862X4 1862X6 1862X8 Tube O.D. (in) 1/4 3/8 1/2 5/8 C (in) L (in) Wt. 0.53 1.62 0.69 1.94 0.83 1.96 0.96 2.51 0.07 0.13 0.18 0.29 Price Each
1862 Union (Ref SAE AA0101)
C1HM94 1862X10
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/4
Thread T 9/16-24
Max P L (in) (in) 1.62 0.47
Wt. 0.11
Price Each
C1HN42 1874X4X4
1874 Quick Connect Bulkhead Union (Ref SAE AA0601) (Ref SAE AA0601)
924
Tube Fittings
Catalog Part No. C1HN17 Tube O.D. (in) 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 Price Each
Eaton Model 1868X4
Thread P 1/8-27 1/4-28 3/8-18 1/8-27 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14
L (in) Wt. 0.95 1.18 1.27 1.33 1.29 1.27 1.47 1.46 1.35 1.50 1.72 1.71 0.03 0.05 0.07 0.08 0.07 0.08 0.14
C1HN18 1868X4X4 C1HN19 1868X4X6 C1HN21 1868X6X2 C1HN20 C1HN22 1868X6 1868X6X6
1868 Male Connector (Ref SAE AA0102)
C1HN23 1868X6X8 C1HN25 1868X8X4 C1HN24 1868X8 C1HN26 1868X8X8 C1HN15 1868X10X6 C1HN14 1868X10
0.11 0.10 0.14 0.18 0.18
Catalog Part No.
Eaton Model
Tube O.D. (in) 1/4 3/8 3/8 3/8 5/8
Thread P 1/8-27 1/8-27 1/4-18 3/8-18 1/2-14
M (in)
N (in)
Wt. 0.06 0.10 0.10 0.10 0.25
Price Each
C1HN46 1880X4 C1HN48 1880X6X2 C1HN47 1880X6 C1HN49 1880X6X6 C1HN45 1880X10
0.95 0.59 1.05 0.48 1.05 0.69 1.10 0.63 1.39 0.90
Fluid Conveying
1880 45 Male Elbow (Ref SAE AA0302)

Catalog Part No. C1HN13 1865X8 Tube O.D. M (in) (in) 1/2 1.24 Price Each
Eaton Model
Wt. 0.16
1865 90 Union Elbow (Ref SAE AA0201)
925
Tube Fittings
Catalog Part No. Tube O.D. (in) 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 5/8 5/8 M (in) N (in) Price Each
Eaton Model
Thread P 1/8-27 1/4-18 3/8-18 1/8-27 1/4-18 3/8-18 1/2-14 3/8-18 1/2-14 3/8-18 1/2-14
Wt. 0.06 0.09 0.11 0.10 0.14 0.15 0.20 0.22 0.25 0.27 0.35
C1HN29 1869X4S C1HN30 1869X4X4S C1HN31 1869X4X6S C1HN33 1869X6X2S C1HN32 C1HN34 1869X6S 1869X6X6S
0.89 0.88 0.99 1.06 0.98 1.06 1.03 0.97 1.10 1.14 1.12 1.15 1.18 1.40 1.13 1.27 1.20 1.47 1.35 1.34 1.38 1.54
1869S Swivel 90 Male Elbow (Ref SAE AA02DD)
C1HN35 1869X6X8S C1HN36 1869X8S C1HN37 1869X8X8S C1HN28 1869X10X6S C1HN27 1869X10S
Catalog Part No. C1HM99 1864X4 C1HN11 1864X6 C1HN12 1864X8
Eaton Model
Tube O.D. M (in) (in) 1/4 3/8 1/2 0.93 1.15 1.22
Wt. 0.11 0.21 0.32
Price Each
Fluid Conveying
1864 Union Tee (Ref SAE AA0401)

Catalog Part No. Tube O.D. (in) 1/4 1/4 3/8 3/8 M (in) N (in) Price Each
Eaton Model
Thread P 1/8-27 1/4-18 1/4-18 3/8-18
Wt. 0.10 0.12 0.20 0.21
C1HN38 1872X4S C1HN39 1872X4X4S C1HN40 1872X6S C1HN41 1872X6X6S
0.93 0.80 0.93 1.04 1.15 1.14 1.15 1.17
1872S Swivel Male Branch Tee (Ref SAE AA04FF)
926
Tubing Accessories
Flaretite Seals
Features: Economical method to reduce minor leaks and weeping connections Concentric ribbed insert design provides for multiple contact points Loctite sealant locks the joint and fills surface imperfections Built-in clip attaches the seal to the nose of the JIC 37 connection Eliminates electrolysis that causes corrosion Allows for a higher assembly torque without damage to mating surfaces Allows for 1/2 degree mis-alignment. Flaretite Seals
Catalog Part No. Aeroquip Model Tube O.D. Dash (in) Size 0.25 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00 -04 -06 -08 -10 -12 -16 -20 -24 -32 Material Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Stainless Steel with Loctite Coating Recommended Assembly Torque (lb-ft) 14 26 55 80 110 140 190 220 325 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
C1GJ46 FF13267 C1GJ47 FF13268 C1GJ48 FF13269 C1GJ49 FF13270
Flaretite Seals
C1GJ50 FF13271 C1GJ51 FF13272 C1GJ52 FF13273 C1GJ53 FF13570 C1GJ54 FF13571
Fluid Conveying
0.01 0.01
927
Pipe Fittings, Brass

Brass
Hex Bushing 90 Street Elbow

Catalog Part No.
C1ET67 C1ET68 C1ET69 C1ET70 C1ET71 C1ET72 C1ET73 C1ET74 C1ET75 C1ET76 C1ET77 C1ET78 C1ET79
Model Number
44-511 44-512 44-513 44-516 44-517 44-518 44-522 44-523 44-524 44-528 44-529 44-530 44-531
Size
1 x 3/8 1 x 1/2 1 x 3/4 1-1/4 x 1/2 1-1/4 x 3/4 1-1/4 x 1 1-1/2 x 3/4 1-1/2 x 1 1-1/2 x 1-1/4 2 x 3/4 2x1 2 x 1-1/4 2 x 1-1/2
Wt.
0.26 0.21 0.18 0.37 0.35 0.36 0.51 0.61 0.40 0.91 0.85 0.74 0.61
Price Each Catalog Part No.

C1ET47 C1FS50 C1ET48 C1ET49 C1ET50
Model Number
44-165 NP44-165 44-166 44-167 44-168
Size
3/4 1 1 1-1/4 1-1/2 2
Nickel Plated Wt.

No No Yes No No No 0.36 0.59 0.59 1.12 1.39 1.76
Price Each
C1HD90 44-164
Tee
Coupling
Catalog Part No.

C1ET51 C1ET53 C1ET54
Model Number
44-255 44-257 44-258
Size
1 1-1/2 2
Wt.
0.84 1.66 2.72
Price Each
Fluid Conveying
Catalog Part No.

C1ET55 C1ET56 C1EV90 C1ET57
Model Number
44-415 44-416 44-417 44-418
Size
1 1-1/4 1-1/2 2
Wt.
0.44 0.56 0.99 1.06
Price Each
Square Head Plug
45 Street Elbow
Catalog Part No.

Model Number
44-655 44-656 44-658
Size
1 1-1/4 2
Wt.
0.21 0.32 0.59
Price Each
Catalog Part No.

C1GF56
Model Number
NP44-205
Size
1
Nickel Plated Wt.

Yes 0.48
Price Each
90 Elbow
Catalog Part No.

C1ET43 C1ET44
Model Number
44-105 44-106
Size
1 1-1/4
Wt.
0.63 1.13
Price Each
928
Pipe Fittings, Brass

Brass
Cap
Catalog Part No.

Model Number
44-470 44-473 44-474 44-475 44-476 44-477
Size
1/8 1/2 3/4 1 1-1/4 1-1/2
Wt.
0.03 0.13 0.16 0.31 0.53 0.52
Price Each
Fluid Conveying
929
Pipe Fittings, Malleable Iron

Malleable Iron Class 150 ANSI/ASME B 16.3 Rated Pressure: 300 PSI (-20F to 150F), 265 PSI @ 200F, 225 PSI @ 250F
Hex Bushing
Bell Reducer
Catalog Part No.

C1AF36 C1BK96 C1AE84 C1AE83 C1AE95 C1BK61 C1BK70 C1BK60 C1AT43 C1AT56 C1AT41 C1AT54 C1AE40 C1AE39 C1AE47 C1AE37 C1AE12 C1AE19 C1AE11 C1AD98 C1BK29 C1BK33 C1BK28 C1BK26 C1BK24 C1AT66 C1AT65 C1AT68 C1BN25 C1BN24 C1BN27 C1BN26 C1BR49 C1BR50
Ward Model
1/4X1/8-HEX/BUSHING 3/8X1/4-HEX/BUSHING 1/2X1/8-HEX/BUSHING 1/2X1/4-HEX-BUSHING 1/2X3/8-HEX/BUSHING 3/4X1/4-HEX/BUSHING 3/4X3/8-HEX/BUSHING 3/4X1/2-HEX/BUSHING 1X1/4-HEX/BUSHING 1X3/8-HEX/BUSHING 1X1/2-HEX/BUSHING 1X3/4-HEX/BUSHING 1-1/4X1/4-HEX/BUSHING 1-1/4X1/2-HEX/BUSHING 1-1/4X3/4-HEX/BUSHING 1-1/4X1-HEX/BUSHING 1-1/2X1/2-HEX/BUSHING 1-1/2X3/4-HEX/BUSHING 1-1/2X1-HEX/BUSHING 1-1/2X1-1/4/HEX-BUSH 2X1/2-HEX/BUSHING 2X3/4-HEX/BUSHING 2X1-HEX/BUSHING 2X1-1/4-HEX/BUSHING 2X1-1/2-HEX/BUSHING 2-1/2X1/2-HEX/BUSHING 2-1/2X1-HEX/BUSHING 2-1/2X2-HEX/BUSHING 3X1-1/4-HEX/BUSHING 3X1-1/2-HEX/BUSHING 3X2-HEX/BUSHING 3X2-1/2-HEX/BUSHING 4X2-HEX/BUSHING 4X3-HEX/BUSHING
Size
1/4 x 1/8 3/8 x 1/4 1/2 x 1/8 1/2 x 1/4 1/2 x 3/8 3/4 x 1/4 3/4 x 3/8 3/4 x 1/2 1 x 1/4 1 x 3/8 1 x 1/2 1 x 3/4 1-1/4 x 1/4 1-1/4 x 1/2 1-1/4 x 3/4 1-1/4 x 1 1-1/2 x 1/2 1-1/2 x 3/4 1-1/2 x 1 1-1/2 x 1-1/4 2 x 1/2 2 x 3/4 2x1 2 x 1-1/4 2 x 1-1/2 2-1/2 x 1/2 2-1/2 x 1 2-1/2 x 2 3 x 1-1/4 3 x 1-1/2 3x2 3 x 2-1/2 4x2 4x3
Wt.
0.02 0.03 0.10 0.08 0.06 0.17 0.14 0.10 0.20 0.18 0.21 0.31 0.33 0.39 0.30 0.47 0.38 0.49 0.34 0.72 0.60 0.15 1.02 0.61 1.23 1.10 1.16 0.88 0.48 1.50 1.63 2.71 3.00
Price Each
Catalog Part No.

C1AF35 C1BK94 C1AE82 C1AE94 C1BK69 C1FF70 C1AT42 C1AT40 C1AT53 C1AE38 C1AE36 C1AE18 C1AD99 C1AD97 C1BK27 C1BK25 C1BK23 C1AT67 C1FA67
Ward Model
1/4X1/8-BELL/REDUCER 3/8X1/4-BELL/REDUCER 1/2X1/4-BELL/REDUCER 1/2X3/8-BELL/REDUCER 3/4X3/8-BELL/REDUCER 3/4X1/2-BELL/REDUCER 1X1/4-BELL/REDUCER 1X1/2-BELL/REDUCER 1X3/4-BELL/REDUCER 1-1/4X1/2-BELL/REDUCE 1-1/4X1-BELL/REDUCER 1-1/2X3/4-BELL/REDUCE 1-1/2X1-BELL/REDUCER 1-1/2X1-1/4-BELL/RDCR 2X1-BELL/REDUCER 2X1-1/4-BELL/REDUCER 2X1-1/2-BELL/REDUCER 2-1/2X2-BELL/REDUCER 3X2-BELL/REDUCER
Size
1/4 x 1/8 3/8 x 1/4 1/2 x 1/4 1/2 x 3/8 3/4 x 3/8 3/4 x 1/2 1 x 1/4 1 x 1/2 1 x 3/4 1-1/4 x 1/2 1-1/4 x 1 1-1/2 x 3/4 1-1/2 x 1 1-1/2 x 1-1/4 2x1 2 x 1-1/4 2 x 1-1/2 2-1/2 x 2 3x2
Wt.
0.08 0.12 0.16
Price Each
0.17 0.24 0.28 0.36 0.51 0.42 0.53 0.65 0.86 0.87 0.94 1.50 0.10
Fluid Conveying
1.40 0.18 3.35
Coupling
Catalog Part No.

C1BK82 C1AE70 C1BK47 C1AE58 C1AE28 C1AD92 C1AT63
Ward Model
3/8-COUPLING 1/2-COUPLING 3/4-COUPLING 1-COUPLING 1-1/4-COUPLING 1-1/2-COUPLING 2-1/2-COUPLING
Size
3/8 1/2 3/4 1 1-1/4 1-1/2 2-1/2
Wt.
0.20 0.20 0.34 0.42 0.50 0.91 2.65
Price Each
930

Union
90 Street Elbow
Catalog Part No.

C1AE74 C1BK52 C1AE63
Ward Model
1/2-UNION 3/4-UNION 1-UNION 1-1/4-UNION 1-1/2-UNION 2-UNION
Size
1/2 3/4 1 1-1/4 1-1/2 2
Wt.
0.39 0.15 0.85 1.52 1.82 2.60
Price Each
Catalog Part No.

C1AF56 C1AF20 C1BK80 C1AE68 C1BK45 C1AE56 C1AE26 C1AD90 C1AT74 C1BK41
Ward Model
1/8-90STREET/ELBOW 1/4-90STREET/ELBOW 3/8-90STREET/ELBOW 1/2-90STREET/ELBOW 3/4-90STREET/ELBOW 1-90STREET/ELBOW 1-1/4-90STREET/ELBOW 1-1/2-90STREET/ELBOW 2-90STREET/ELBOW 3-90STREET/ELBOW
Size
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 3
Wt.
0.07 0.10 0.18 0.27 0.43 0.71 1.06 1.47 2.69 5.00
Price Each
C1AE33 C1AD96 C1AT81
45 Street Elbow
Fluid Conveying
Catalog Part No.

C1HY11 C1ZZ64 C1ZZ65
Ward Model
3/4-45STREET/ELBOW 1-45STREET/ELBOW 1-1/4-45STREET/ELBOW
Size
3/4 1 1-1/4
Wt.
0.33 0.58 0.86
Price Each
Tee
Catalog Part No.

C1AF25 1/4-TEE 1/2-TEE 3/4-TEE 1-TEE
Ward Model
Size
1/4 1/2 3/4 1 1-1/4 1-1/2 2
Wt.
0.16 0.44 0.64 0.95 1.34 1.89 2.71
Price Each
90 Elbow
C1AE73 C1BK51 C1AE62 C1AE32 C1AD95
1-1/4-TEE 1-1/2-TEE 2-TEE
Catalog Part No.

C1AF55 C1AF19 C1AE67 C1BK44 C1AE55 C1AE25
Ward Model
1/8-90ELBOW 1/4-90ELBOW 1/2-90ELBOW 3/4-90ELBOW 1-90ELBOW 1-1/4-90ELBOW 1-1/2-90ELBOW 2-90ELBOW 2-1/2-90ELBOW 3-90ELBOW
Size
1/8 1/4 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
Wt.
0.06 0.12 0.50 0.15 0.69 1.05 1.50 2.14 1.50 5.00
Price Each
C1AT80
Cross
C1AD89 C1AT73 C1AT62 C1BK40
Catalog Part No.

C1AE59 C1AT77
Ward Model
1-CROSS 2-CROSS
Size
1 2
Wt.
1.24 2.00
Price Each
931

Plug
Catalog Part No.

C1AF59 C1AF23 C1BK83 C1AE72 C1BK49 C1AE60 C1AE30 C1AD94 C1AT78
Ward Model
1/8-PLUG 1/4-PLUG 3/8-PLUG 1/2-PLUG 3/4-PLUG 1-PLUG 1-1/4-PLUG 1-1/2-PLUG 2-PLUG
Size
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Wt.
0.01 0.04 0.06
Price Each
0.09 0.14 0.19 0.40 0.46 0.90
Cap
Fluid Conveying
Catalog Part No.

C1AF21 C1BK81 C1AE69 C1BK46 C1AE57 C1AE27 C1AD91 C1AT75
Ward Model
1/4-CAP 3/8-CAP 1/2-CAP 3/4-CAP 1-CAP 1-1/4-CAP 1-1/2-CAP 2-CAP
Size
1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Wt.
0.02 0.09 0.17 0.24 0.50 0.50
Price Each
0.72 1.11
932
Pipe Fittings, Steel

Steel
Catalog Part No. C1AF60 C1AF24 C1BK84 C1DU50 C1BK50 C1AE31 C1ZZ66 C1AT79 C1AT64
Model Number 1/8-STEEL-COUPLING 1/4-STEEL-COUPLING 3/8-STEEL-COUPLING 1/2-STEEL-COUPLING 3/4-STEEL-COUPLING 1-1/4-STEEL-COUPLING 1-1/2-STEEL-COUPLING 2-STEEL-COUPLING 2-1/2-STEEL-COUPLING
Size 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
O.D. (in)
Length 0.90 1.16 1.17 1.55 2.16 1.97 2.05 2.00 2.15 3.15
Wt. 0.03 0.40 0.40 0.16 0.26 0.41 0.90 0.67 1.03 2.05 3.43
Price Each
Schedule 40 Coupling Pneumatic Power & Control
C1AE61 1-STEEL-COUPLING
C1HD84 3-STEEL-COUPLING
Fluid Conveying
933
Pipe Nipples, Steel

Steel
Schedule 40 Pipe Nipples
Catalog Part No.
C1AE45 C1AE48 C1AE49 C1AE52 C1AE24 C1AE13
Model Number
1-1/4X3-1/2 1-1/4X4 1-1/4X4-1/2 1-1/4X6 1-1/2XCLOSE 1-1/2X2 1-1/2X2-1/2 1-1/2X3 1-1/2X3-1/2 1-1/2X4 1-1/2X4-1/2 1-1/2X5 1-1/2X6 2XCLOSE 2X2-1/2 2X3 2X4 2X5 2X6 2-1/2XCLOSE 2-1/2X3-1/2 2-1/2X4-1/2 3XCLOSE 4XCLOSE 6XCLOSE
Thread
1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 3-8 4-8 6-8
Length
3.50 4.00 4.50 6.00 2.00 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 2.00 2.50 3.00 4.00 5.00 6.00 2.50 3.50 4.50 2.75
Wt.
0.10 0.63 0.70 0.99 0.25 0.33 0.42 3.00 0.63 0.69 0.87 0.93 1.08 0.39 0.57 0.10 0.33 0.50 1.47 0.83 0.25 1.43 0.40 3.00 2.88
Price Each

Catalog Part No.
C1AF81 C1AF63 C1AF77 C1AF78 C1AF80 C1AF32 C1AF30 C1AF37 C1AF38 C1AF43 C1AF46 C1AF47 C1AF52 C1BL23 C1BK91 C1BK98 C1BK99 C1BL14 C1BL21 C1AE80 C1AE85 C1AE86 C1AE96 C1AF11 C1AF13 C1BK76 C1BK63 C1BK64 C1BK66 C1BK67 C1BK71 C1BK72 C1BK74 C1AT51 C1AT60 C1AT47 C1AT48 C1AT50 C1AT57 C1AT58 C1AT59 C1AE53 C1AE42 C1AE43 C1AE44
C1AE14
Model Number
1/8XCLOSE 1/8X1-1/2 1/8X5 1/8X6 1/8X8 1/4X1-1/4 1/4X1-1/2 1/4X2 1/4X2-1/2 1/4X3 1/4X4 1/4X4-1/2 1/4X6 3/8XCLOSE 3/8X1-1/2 3/8X2 3/8X2-1/2 3/8X3-1/2 3/8X6 1/2X1-1/2 1/2X2 1/2X2-1/2 1/2X4 1/2X5 1/2X6 3/4XCLOSE 3/4X2 3/4X2-1/2 3/4X3 3/4X3-1/2 3/4X4 3/4X4-1/2 3/4X6 1X3-1/2 1XCLOSE 1x2 1X2-1/2 1X3 1X4 1X4-1/2 1X6 1-1/4XCLOSE 1-1/4X2 1-1/4X2-1/2 1-1/4X3
Thread
1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2
Length
0.625 1.50 5.00 6.00 8.00 1.25 1.50 2.00 2.50 3.00 4.00 4.50 6.00 1.00 1.50 2.00 2.50 3.50 6.00 1.50 2.00 2.50 4.00 5.00 6.00 1.38 2.00 2.50 3.00 3.50 4.00 4.50 6.00 3.50 1.50 2.00 2.50 3.00 4.00 4.50 6.00 1.63 2.00 2.50 3.00
Wt.
0.02 0.03 0.10 0.12 0.20 0.04 0.05 0.10 0.08 0.10 0.13 0.14 0.20 0.04 0.06 0.08 0.05 0.08 0.40 0.08 0.25 0.14 0.20 0.34 0.38 0.09 0.05 0.10 0.22 0.20 0.35 0.25 0.60 0.41 0.13 0.28 0.25 0.33 0.47 0.59 0.15 0.25 0.05 0.10 0.43
Price Each
C1AE15 C1AE16 C1AE20 C1AE21 C1AE22 C1AE23 C1BK38 C1BK31 C1BK32 C1BK34 C1BK35 C1BK36 C1AT71 C1AT69 C1AT70 C1ZY63 C1BR51 C1BY51


Catalog Part No.
C1ZZ63 C1AF69 C1AF67 C1EL48 C1AF39 C1AF44 C1AF49 C1AF51 C1AF53 C1BL24 C1BK92 C1BL12 C1BL16 C1BL15 C1BL20
Model Number
1/8X1-1/2-80 1/8X2-80 1/8X2-1/2-80 1/4XCLOSE-80 1/4X2-1/2-80 1/4X3-80 1/4X4-80 1/4X5-80 1/4X6-80 3/8XCLOSE-80 3/8X1-1/2-80 3/8X2-80 3/8X3-80 3/8X3-1/2-80 3/8X5-80
Thread
1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18
Length
1.50 2.00 2.50 1.00 2.50 3.00 4.00 5.00 6.00 1.06 1.50 2.00 3.00 3.50 5.00
Wt.
0.09 0.06 0.07 0.03 0.10 0.12 0.16 0.21 0.25 0.04 0.08 0.11 0.16 0.25 0.50
Price Each
934
Pipe Nipples, Steel

Steel
Catalog Part No.
C1BL22 C1AF17 C1EV47 C1AE92 C1AE99 C1AF14 C1BK77 C1BK65 C1BK68 C1BK73 C1BK75 C1AT61 C1AT49 C1AT52 C1AE46 C1AE50 C1AE17 C1BK39 C1BK37
Model Number
3/8X6-80 1/2XCLOSE-80 1/2X2-1/2-80 1/2X3-80 1/2X4-80 1/2X6-80 3/4XCLOSE-80 3/4X2-80 3/4X3-80 3/4X4-80 3/4X6-80 1XCLOSE-80 1X2-80 1X3-80 1-1/4X3-80 1-1/4X4-80 1-1/2X3-80 2XCLOSE-80 2X6-80
Thread
3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2 2-11-1/2
Length
6.00 1.13 2.50 3.00 4.00 6.00 1.63 2.00 3.00 4.00 6.00 1.50 2.00 3.00 3.00 4.00 3.00 2.00 6.00
Wt.
0.34 0.08 0.19 0.30 0.31 0.47 0.12 0.20 0.03 0.44 0.63 0.19 0.29 0.47 0.59 0.86 0.05 2.00 2.13
Price Each
Fluid Conveying
935
Pipe Nipples, Brass

Brass
Brass Pipe Nipples
Brass Pipe Nipples

Catalog Part No.
C1AF82 C1AF64 C1AF68 C1AF79 C1AF54 C1AF31 C1AF42 C1AF40 C1AF45 C1AF50 C1BL25 C1BL11 C1FA64 C1AF18 C1AE81 C1AE88 C1AE91 C1AE98 C1AF15 C1ES99 C1ET11 C1ET12 C1ET14 C1ET15 C1ET18 C1ET19 C1ET20 C1ET21 C1ET31 C1ET32 C1ET35
Model Number
1/8XCLOSE-B 1/8X1-1/2-B 1/8X2-1/2-B 1/8X6-B 1/4XCLOSE-B 1/4X1-1/2-B 1/4X2-B 1/4X2-1/2-B 1/4X3-B 1/4X4-B 3/8XCLOSE-B 3/8X2-1/2-B 3/8X5-B 1/2XCLOSE-B 1/2X1-1/2-B 1/2X2-B 1/2X3-1/2-B 1/2X4-1/2-B 1/2X6-B 40-080 40-081 40-082 40-084 40-086 40-100 40-101 40-103 40-105 40-140 40-141 40-145
Thread
1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2
Length
0.75 1.50 2.50 6.00 1.00 1.50 2.00 2.50 3.00 4.00 1.00 2.50 5.00 1.13 1.50 2.00 3.50 4.50 6.00 1.38 1.50 2.00 3.00 4.00 1.50 2.00 3.00 4.00 2.00 2.00 4.00
Wt.
0.03 0.03 0.05 0.12 0.05 0.05 0.06 0.08 0.10 0.14 0.04 0.50
Price Each
0.24 0.06 0.09 0.13 0.24 0.29 0.42 0.11 0.11 0.18 0.27 0.38 0.16 0.19 0.38 0.50 0.33 0.40 0.91
936
Flexmaster Pipe & Tube Joints

Joints for Rigid Pipe
Styles Available: Flexmaster joints are available in both standard and self-restrained styles. The self-restrained style has a stainless steel gripping ring inside each gasket. This feature allows the joint to maintain a firm grip on the pipe or tube, preventing movement along the pipe or tube. Misalignment: The bulged, straight-through Flexmaster joints accommodate angular misalignment up to 4 per end. (Tees, elbows and crosses up to 2 per end. Pressure Rating: Flexmaster joints are designed for up to 300 psi service, depending on application and size. Note: The Flexmaster joint is designed to seal pipe and tube connections. The Flexmaster joint is not intended to hold piping systems together. Normal hangars, guides, anchors and other external piping restraints must be used to restrain the piping or tubing system from movement.
NH1600 / NH1650 Straight
NH1600 / NH1650
Catalog Part No. C1JP76 C1DF69 Aeroquip Model NH1600C125B0325 NH1600C150B0350 NH1600C250B0650 NH1600C400B0650 Pipe Size 1.25 1.50 2 2.50 4 Pipe O.D. 1.660 1.9 2.375 2.875 4.5 Type STD STD STD STD STD Gasket Material Buna-N Buna-N Buna-N Buna-N Buna-N Sleeve Material Plated Steel Plated Steel Plated Steel Plated Steel Plated Steel A (in) 3.5 4 6.5 B (in) C (in) Wt. 1.30 1.51 1.86 5.67 8.39 Price Each 3.25 2.71 3.85 2.96 4.11 3.43 4.6
Fluid Conveying
C1DF70 NH1600C200B0400 C1FG15 C1DF73
6.50 4.73 6.23 6.36 7.89
Types: STD (Standard)
SR (Self-Restrained)
NH1600 / NH1650 Straight (Long) NH1600 / NH1650

Catalog Part No. C1DF71 Aeroquip Model NH1600C200B0750 Pipe Size 2 Pipe O.D. 2.375 Type STD Gasket Material Buna-N Sleeve Material Plated Steel E (in) Wt. 2.40 Price Each
937
Flexmaster Pipe & Tube Joints

Joints for Rigid Pipe
NH1602 / NH1652 90 Long Elbow
NH1602 / NH1652
Catalog Part No. C1HK81 Aeroquip Model NH1602C200B Pipe Size 2 Pipe O.D. 2.375 Type STD Gasket Material Buna-N Sleeve Material Plated Steel R L (in) (in) 5.38 2.62 Wt. 2.54 Price Each
Flexmaster Parts
Catalog Part No. C1HJ20 C1DF76 C1HJ21 C1FD76 Aeroquip Model NK1000063C300 NK1000061C350 NK1000063C400 NK1000023-400 Description Standard buna-n gasket 2 Inch Pipe Standard buna-n gasket 3 Inch Pipe Self-restrained buna-n gasket 3-1/2 Inch Pipe Standard buna-n gasket 4 Inch Pipe Gasket retainer 2 Inch Pipe Gasket retainer 4 Inch Pipe Wt. 0.07 0.40 0.37 0.82 Price Each
C1DF77 NK1000063C200
Fluid Conveying
C1DF75 NK1000023-200
0.14 2.00
938
Weld Couplings
Steel Weld Couplings

Catalog Part No. F (in) SAE UN-2B 9/16-18 Price Each
Anchor Model A (in) B (in) C (in) D (in) E (in) 1.00 0.508 1.00 0.25 0.875
Wt. 0.15
C1HX14 835-6
835 SAE Half Coupling AISI1020 Carbon Steel

Anchor Model A (in) B (in) C (in) D (in) E (in) C1JL72 1080 (Vescor Model) 1.875 0.625 0.855 F (in) SAE UN-2B 9/16-18 Wt. 0.35 Price Each
820 SAE to Socket Weld Full Coupling AISI1020 Carbon Steel
Fluid Conveying
939
Adapters
Hydraulic Power & Control Category Page Category Brass Pipe to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . Pipe to 37 Flare . . . . . . . . . . . . . . . . . . . . . . . . Pipe to 45 Flare . . . . . . . . . . . . . . . . . . . . . . . . 45 Flare Union . . . . . . . . . . . . . . . . . . . . . . . . . 42 Inverted Flare to 45 Flare . . . . . . . . . . . . . 42 Inverted Flare to Pipe . . . . . . . . . . . . . . . . . 42 Inverted Flare Unions & Accessories . . . . . Garden Hose Adapters . . . . . . . . . . . . . . . . . . . Page Steel O-Ring Face Seal Braze Adapters . . . . . . . . . . . 941 O-Ring Face Seal to Straight Thread O-Ring . . . 942 O-Ring Face Seal to Pipe . . . . . . . . . . . . . . . . . . 945 O-Ring Face Seal to 37 Flare . . . . . . . . . . . . . . 946 O-Ring Face Seal to O-Ring Face Seal . . . . . . . 947 O-Ring Face Seal Accessories. . . . . . . . . . . . . . 949 Pipe to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . 950 Pipe to 37 Flare . . . . . . . . . . . . . . . . . . . . . . . . . 962 Pipe to Straight Thread O-Ring . . . . . . . . . . . . . 973 Pipe to Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 977 37 Flare Union. . . . . . . . . . . . . . . . . . . . . . . . . . 978 Straight Thread O-Ring to 37 Flare . . . . . . . . . . 988 Straight Thread O-Ring to Straight Thread O-Ring . 994 Straight Thread O-Ring to Hose . . . . . . . . . . . . . 996 SAE Split Flange to 37 Flare . . . . . . . . . . . . . . . 997 SAE Split Flange to O-Ring Face Seal . . . . . . . . 999 Braze & Weld to 37 Flare . . . . . . . . . . . . . . . . 1000 42 Inverted Flare to 37 Flare . . . . . . . . . . . . . 1001 Restrictor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1002 Metric to 37 Flare . . . . . . . . . . . . . . . . . . . . . . 1003 Metric to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . 1006 Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1007 BSPP to 37 Flare. . . . . . . . . . . . . . . . . . . . . . . 1008 BSPP to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . 1011 BSPP to Metric . . . . . . . . . . . . . . . . . . . . . . . . . 1012 BSPP to BSPT . . . . . . . . . . . . . . . . . . . . . . . . . 1013 BSPP to O-Ring Face Seal. . . . . . . . . . . . . . . . 1014 BSPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1015 BSPT to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . 1018 BSPT to 37 Flare. . . . . . . . . . . . . . . . . . . . . . . 1019 JIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1020 JIS 30 Seat (BSPP Thread) To 37 Flare . . . . 1021 Komatsu, Kobelco. . . . . . . . . . . . . . . . . . . . . . . 1022 Stainless Steel Pipe to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023 Pipe to 37 Flare . . . . . . . . . . . . . . . . . . . . . . . . 1027 37 Flare Union. . . . . . . . . . . . . . . . . . . . . . . . . 1030 Straight Thread O-Ring to 37 Flare . . . . . . . . . 1033 Metric to 37 Flare . . . . . . . . . . . . . . . . . . . . . . 1034 BSPP to 37 Flare. . . . . . . . . . . . . . . . . . . . . . . 1035 Auxiliary Components. . . . . . . . . . . . . . . . . . . . 1036 1037 1044 1045 1049 1052 1053 1055 1056
Fluid Conveying
Working Pressure Tables: (Steel adapters) page 1349 , (Brass & Stainless Steel Adapters) page 1350 .
940
Adapters
Steel O-Ring Face Seal Braze Adapters
Catalog Part No. Aeroquip Model Tube O.D. (in) 0.38 0.50 0.63 0.75 1.00 A (in) B (in) F (in) Wt. 0.11 0.02 0.03 0.05 0.07 Price Each
C1EP81 FC1229-0606S C1EP83 FC1229-0808S C1EP84 FC1229-1010S
0.29 0.25 0.38 0.42 0.38 0.50 0.42 0.38 0.63 0.44 0.38 0.75 0.56 0.50 1.00
FC1229 ORS-BR Shoulder Internal Braze
C1EP86 FC1229-1212S C1EP87 FC1229-1616S
Caution: In applications exceeding +480 F (such as during brazing), order the oil-coated NON-plated nut by using part number FC1857-Size-186. When a PLATED nut is heated above +480 F toxic gasses are given off.
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.38 0.50 0.63 0.75 1.00
Thread T 11/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12
A (in)
B (in) F (in) Wt. 0.07 0.12 0.18 0.26 0.46
Price Each
C1EW75 FF1851T0606S C1EQ32 FF1851T0808S C1EQ34 FF1851T1010S C1EQ35 FF1851T1212S C1EQ36 FF1851T1616S
0.83 0.25 0.38 1.01 0.38 0.50 1.12 0.38 0.63 1.21 0.38 0.75 1.47 0.50 1.00
FF1851T ORS / Braze Adapter
Note: ORS O-Rings page 1098
Fluid Conveying
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.25 0.38 0.50 0.63 1.00
Thread T1 9/16-18 11/16-16 13/16-16 1-14 1-7/16-12
A (in)
E (in)
Wt. 0.02 0.04 0.07 0.10 0.26
Price Each
C1EP94 FC2326-04S C1EP95 FC2326-06S
0.58 0.41 0.67 0.53 0.83 0.65 0.92 0.83 1.10 1.14
FC2326 ORS-BR Nut (Plated)
C1EP96 FC2326-08S C1EP97 FC2326-10S C1EP99 FC2326-16S
Caution: In applications exceeding +480 F (such as during brazing), order the oil-coated NON-plated nut by using part number FC1857-Size-186. When a PLATED nut is heated above +480 F toxic gasses are given off.
941
Adapters
Steel O-Ring Face Seal to Straight Thread O-Ring

Catalog Part No. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.25 0.25 0.38 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.63 0.63 0.75 0.75 0.75 1.00 1.0 1.25 1.25 9/16-18 9/16-18 11/16-16 11/16-16 11/16-16 11/16-16 11/16-16 11/16-16 13/16-16 13/16-16 13/16-16 13/16-16 13/16-16 1-14 1-14 1-3/16-12 1-3/16-12 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12 1-7/16-12 1-11/16-12 1-11/16-12 7/16-20 9/16-18 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/8-14 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 3/4-16 1-1/16-12 1-1/16-12 1-5/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 A (in) C (in) Price Each
Wt. 0.05 0.08 0.09 0.09 0.10 0.14 0.22 0.12 0.15 0.23 0.35 0.25 0.25 0.36 0.39 0.56 0.61 0.56 0.85 0.89
C1CU64 FF1852T0404S C1EQ37 FF1852T0406S C1CU65 FF1852T0604S C1CU66 FF1852T0605S C1KN96 1FO-06Z C1CU67 C1CU68 FF1852T0606S FF1852T0608S
1.13 0.43 1.20 0.47 1.34 0.43 1.22 0.43 1.26 0.47 1.26 0.47 1.38 0.55 1.53 0.63 1.48 0.47 1.44 0.55 1.44 0.55 1.59 0.63 1.75 0.73 1.70 0.63 1.86 0.73 1.91 0.55 1.92 0.73 1.91 0.73 1.96 0.73 2.14 0.73 1.98 0.73 1.98 0.73 2.28 0.73 2.06
FF1852T ORS / SAE O-Ring Boss
C1EU61 FF1852T0610S C1CU69 FF1852T0806S C1CU70 FF1852T0808S C1KN97 1FO-08Z C1CU71 FF1852T0810S C1GD96 FF1852T0812S C1FM72 FF1852T1010S C1EQ38 FF1852T1012S C1CU73 FF1852T1208S C1CU74 FF1852T1212S C1KN98 1FO-12Z C1CU75 FF1852T1216S
Fluid Conveying
C1GD97 FF1852T1612S C1KN99 1FO-16Z C1CU76 FF1852T1616S C1GL76 FF1852T2016S C1JS44 FS6400-20-20-O
Note: SAE O-Ring Boss O-Rings page 1099 ORS O-Rings page 1098 Note: FS6400 is Brennan model. Note: 1FO is Eaton-Winner model. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 FF1854T0808S 0.50 13/16-16 3/4-16
Catalog Part No. C1JA65
A (in)
C (in)
Wt. 0.25
Price Each
2.67 0.55
Note: SAE O-Ring Boss O-Rings page 1099 ORS O-Rings page 1098
FF1854T ORS / SAE O-Ring Boss (Long)

Catalog Part No. Tube O.D. A B C (in) Thread T1 Thread T2 (in) (in) (in) Wt. 0.25 0.38 0.50 0.63 9/16-18 11/16-16 13/16-16 1-14 7/16-20 9/16-18 3/4-16 7/8-14 0.63 1.18 0.37 0.10 0.74 1.30 0.16 0.80 1.43 0.55 0.25 0.92 1.76 0.63 0.44 Price Each
Aeroquip Model
C1HX80 FF2068T0404S C1ZT27 FF2068T0606S C1JA76 FF2068T0808S C1JA77 FF2068T1010S C1JC84 FF2068T1212S
FF2068T C1JA78 FF2068T1616S 1.00 1-7/16-12 1-5/16-12 1.18 2.06 0.73 1.00 ORS / SAE O-Ring Boss 45 Elbow Note: FS6802 is Brennan model. SAE O-Ring Boss O-Rings page 1099 ORS O-Rings
page 1098
0.75 1-3/16-12 1-1/16-12 1.02 1.97 0.73 0.63
942
Adapters
Catalog Part No. Aeroquip Model C1CU83 FF1868T0404S C1EQ39 FF1868T0406S C1CU84 FF1868T0604S C1KP11 1FO9-06OGZ C1CU85 FF1868T0606S Tube O.D. A B C (in) Thread T1 Thread T2 (in) (in) (in) Wt. 0.25 0.25 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.63 0.63 0.75 0.75 1.0 9/16-18 9/16-18 11/16-16 11/16-16 11/16-16 11/16-16 13/16-16 13/16-16 13/16-16 13/16-16 13/16-16 1-14 1-14 1-14 1-3/16-12 7/16-20 9/16-18 7/16-20 9/16-18 9/16-18 3/4-16 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 7/8-14 0.85 1.29 0.43 0.12 0.92 1.45 0.47 0.18 0.98 1.37 0.43 0.17 1.06 1.36 0.98 1.45 0.47 0.24 1.04 1.60 0.55 0.27 1.10 1.44 0.47 0.23 Price Each
FF1868T C1CU86 FF1868T0608S ORS / SAE O-Ring Boss 90 Elbow C1GM86 FF1868T0806S (Adjustable) C1KP12 1FO9-08OGZ
C1CU87 FF1868T0808S C1CU88 FF1868T0810S C1CU89 FF1868T0812S C1KP13 1FO9-10OGZ C1CU90 FF1868T1010S C1ZX90 FF1868T1012S C1FR89 FF1868T1210S C1CU91 FF1868T1212S C1KP14 1FO9-12OGZ C1CU92 FF1868T1616S C1KP15 1FO9-16-20OGZ
1.22 1.59 1.10 1.60 0.55 0.27 1.21 1.97 0.63 0.23 1.44 2.00 1.31 1.97 0.63 0.44 1.47 2.01 0.63 0.62
1-1/16-12 1.32 2.17 0.73 0.03
1-1/16-12 1.41 2.17 0.73 0.70
1-3/16-12 1-1/16-12 1.47 2.17 0.73 0.75 1-3/16-12 1-1/16-12 1.61 2.13 1-7/16-12 1-5/16-12 1.64 2.35 0.73 1.24 1-7/16-12 1-5/8-12 1.87 2.38
Fluid Conveying
Note: SAE O-Ring Boss O-Rings page 1099 ORS O-Rings page 1098 Note: 1FO9 is Eaton-Winner model.
Catalog Part No.
Aeroquip Model
Thread T1 Thread T2 9/16-18 11/16-16 9/16-18 11/16-16
Thread T3
A B C (in) (in) (in) Wt.
Price Each
C1CU79 FF1865T0406S C1CU80 FF1865T0604S
9/16-18 1.45 0.92 0.92 0.23 7/16-20 1.37 1.17 0.98 0.23
C1EC72 FF1865T2020S 1-11/16-12 1-11/16-12 1-5/8-12 2.45 1.76 1.76 1.97 Note: FS6804 is Brennan model. FS6804-*FG is a forged Brennan model. SAE O-Ring Boss O-Rings page 1099 ORS O-Rings page 1098
FF1865T ORS / ORS / SAE O-Ring Boss Tee
Catalog Part No. Aeroquip Model C1EC98 FF2227T0808S
Tube O.D. A B C (in) Thread T1 Thread T2 (in) (in) (in) Wt. 0.50 13/16-16 3/4-16 1.10 2.95 0.55 0.55
Price Each
FF2227 ORS / SAE O-Ring Boss (Long) 90 Elbow
Note: SAE O-Ring Boss O-Rings page 1099 ORS O-Rings page 1098
943
Adapters

Catalog Part No. Tube O.D. A B C (in) Thread T1 Thread T2 (in) (in) (in) Wt. 0.50 13/16-16 3/4-16 1.10 1.60 0.36 Price Each
Aeroquip Model
C1ED86 FS6803-8-NWOFG
Note: FS6803 is Brennan model. FS6803-*FG is a forged Brennan model. SAE O-Ring Boss O-Rings page 1099 ORS O-Rings page 1098
FF1861T ORS / SAE O-Ring Boss / ORS Tee
Fluid Conveying
944
Adapters
Steel O-Ring Face Seal to Pipe
Catalog Part No. C1JA70 Tube O.D. Aeroquip Model (in) 0.25 0.25 0.25 0.38 0.38 0.38 0.50 0.50 0.50 0.50 0.63 0.63 0.63 0.75 0.75 0.75 1.0 1.0 1.25 FF2031T0406S A (in) 1.24 1.24 1.49 1.30 1.30 1.55 1.36 1.36 1.61 1.69 1.72 1.78 1.93 1.84 2.03 1.86 2.05 2.16 Price Each
Thread T1 9/16-18 9/16-18 9/16-18 11/16-16 11/16-16 11/16-14 13/16-16 13/16-16 13/16-16 13/16-16 1-14 1-14 1-14 1-3/16-12 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12 1-11/16-12
Thread T2 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 3/4-14 1/2-14 3/4-14 1-11-1/2 1/2-14 3/4-14 1-11-1/2 3/4-14 1-11-1/2 1-1/4-11-1/2
Wt. 0.07 0.10 0.13 0.09 0.13 0.19 0.12
C1CU98 FF2031T0404S C1EC82 FF2031T0408S C1CU99 FF2031T0604S C1CV11 FF2031T0606S C1HX79 FF2031T0608S C1EC83 FF2031T0804S C1GE94 FF2031T0806S C1CV12 FF2031T0808S C1ED32 FS2404-08-12 C1EC84 FF2031T1008S C1EC85 FF2031T1012S C1ED33 FS2404-10-16 C1ED34 FS2404-12-08 C1CV14 FF2031T1212S C1EC86 FF2031T1216S C1EC87 FF2031T1612S C1EC88 FF2031T1616S C1EC89 FF2031T2020S
FF2031T ORS / Male Pipe
0.12 0.18 0.40 0.22 0.25 0.43 0.32 0.36 0.41 0.47 0.48 0.68
Fluid Conveying
Note: FS2404 is Brennan model. ORS O-Rings page 1098
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.38
Thread T1 11/16-16
A B Thread T2 (in) (in) 3/8-18 0.74 1.04
Wt. 0.15
Price Each
C1EC94 FF2093T0606S
FF2093T ORS / Male Pipe 45 Elbow

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.38 0.38 0.38 0.50 0.50 Thread T1 9/16-18 11/16-16 11/16-16 11/16-16 13/16-16 13/16-14 A B Thread T2 (in) (in) 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 3/4-14 0.92 1.08 0.98 1.08 1.04 1.21 1.15 1.53 1.21 1.53 1.32 1.65 Wt. 0.11 0.15 0.20 0.03 0.30 0.41 Price Each
C1EC90 FF2032T0404S C1CV15 FF2032T0604S C1HX24 FF2032T0606S C1JA71 C1JA72 FF2032T0608S FF2032T0812S C1EQ45 FF2032T0808S
FF2032 ORS / Male Pipe 90 Elbow
945
Adapters
Steel O-Ring Face Seal to 37 Flare

Catalog Part No. Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75 Price Each
Brennan Model
Thread A1 9/16-18 11/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12
Thread A2 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
L (in) Wt. 1.50 1.76 1.90 2.30 2.70 0.08 0.15 0.24 0.29 0.54 0.81
C1EW83 FS6504-04-04 C1EW84 FS6504-06-06 C1EW85 FS6504-08-08 C1EW86 FS6504-10-10 C1FQ86 FS6504-12-12
FS6504 1.00 Female O-Ring Face Seal / Male 37 C1FM73 FS6504-16-16 Note: ORS O-Rings page 1098 Flare
Catalog Part No.
Brennan Model
Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75
Thread A1 9/16-18 11/16-16 13/16-16 1-14 1-3/16-12
Thread B2 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12
L (in) Wt. 1.35 1.54 1.72 2.00 2.25 0.07 0.11 0.17 0.25 0.45
Price Each
C1EZ13 FS6402-04-04 C1EM20 FS6402-06-06 C1EZ14 FS6402-08-08 C1EZ15 FS6402-10-10 C1EZ16 FS6402-12-12
Fluid Conveying
FS6402 Note: ORS O-Rings page 1098 Male O-Ring Face Seal / Female 37 Flare Swivel
Catalog Part No. Tube O.D. (in) 0.38 0.50 0.63 0.75 Price Each
Brennan Model
Thread A1 11/16-16 13/16-16 1-14 1-3/16-12
Thread B2 9/16-18 3/4-16 7/8-14 1-1/16-12
L (in) Wt. 1.30 1.55 1.75 1.95 0.09 0.15 0.25 0.39
C1EZ18 FS6403-06-06 C1EZ19 FS6403-08-08 C1EZ20 FS6403-10-10 C1EZ21 FS6403-12-12
FS6403 Male O-Ring Face Seal / Male 37 Flare
946
Adapters
Steel O-Ring Face Seal to O-Ring Face Seal
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.38 0.50 0.50 0.63 0.75 1.00 1.00 A (in) 1.08 1.22 1.33 1.39 1.68 1.80 1.86 1.92 1.94 Price Each
Thread T1 9/16-18 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12
Thread T2 9/16-18 11/16-16 11/16-16 13/16-16 1-14 1-14 1-3/16-12 1-3/16-12 1-7/16-12
Wt. 0.08 0.10 0.14 0.14 0.28 0.38 0.40
C1CU95 FF2000T0404S C1GL80 FF2000T0606S C1EQ41 FF2000T0806S C1EQ42 FF2000T0808S
FF2000T ORS / ORS
C1EF81 FF2000T1010S C1ED24 FS2403-12-10 C1CU96 FF2000T1212S C1EQ44 FF2000T1612S C1GJ56 FF2000T1616S
0.56 0.58
Note: FS2403 is Brennan model. ORS O-Rings page 1098 Tube O.D. Aeroquip Model (in) 0.50 0.63 0.75 1.25
Catalog Part No.
Thread T1 11/16-16 13/16-16 13/16-16 1-7/16-12
Thread T2 13/16-16 1-14 1-3/16-12 1-11/16-12
A (in) 0.94 1.12 1.10 2.69
Wt. 0.13 0.22 0.35 1.19
Price Each
C1GJ63 FF2281T0608S C1GJ64 FF2281T0810S C1GL81 FF2281T0812S C1FZ56 FF2281T1620S
FF2281T ORS / ORS Reducer Adapter
Fluid Conveying
Catalog Part No.
Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.25 0.38 0.50 0.63 0.75 1.00 9/16-18 11/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12 1-7/16-12 1-3/16-12 11/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12 1-7/16-12
A (in)
B (in)
Wt. 0.15 0.24 0.35 0.58 0.75 1.03
Price Each
C1GE90 FF1994T0404S C1FU35 FF1994T0606S C1GE91 FF1994T0808S C1GE92 FF1994T1010S C1FV93 FF1994T1212S C1KS72 6F-16LNZ
1.47 1.82 2.09 1.34 1.10 1.49 1.31 1.62 2.72 1.64 2.76 1.66 1.64 2.10
FF1994T ORS / ORS Bulkhead Adapter
C1GE93 FF1994T1616S
Note: ORS O-Rings page 1098 Note: 6F is Eaton-Winner model. Tube O.D. (in) Thread T1 Thread T2 1-11/16-12 1-11/16-12
Catalog Part No. C1JF81
Brennan Model
A (in)
B (in)
Wt. 1.23
Price Each
FS6502-20-20-FG 1.25
FS6502 Female ORFS / Male ORFS 45 Elbow
947
Adapters
Steel O-Ring Face Seal to O-Ring Face Seal

Catalog Part No. C1JA81 Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 FF2098T0404S 0.25 0.38 0.50 0.63 0.75 1.00 9/16-18 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12 9/16-18 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12 A (in) B (in) Price Each
Wt. 0.06 0.20 1.41 0.54 0.87 1.22
0.85 1.04 0.98 1.15 1.22 1.10 1.49 1.31 1.62 1.47 1.82 1.64 2.10
C1CV16 FF2098T0606S C1KR11 2F9-08Z C1GG81 FF2098T0808S C1HX81 FF2098T1010S C1CV17 FF2098T1212S C1FR90 FF2098T1616S
FF2098T Female ORS / ORS 90 Elbow
Note: ORS O-Rings page 1098 Note: 2F9 is Eaton-Winner model.
Catalog Part No.
Aeroquip Model
Tube A B C O.D. (in) Thread T1 Thread T2 (in) (in) (in) Wt. 0.25 0.38 0.38 0.50 0.63 1.0 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 9/16-18 11/16-16 13/16-16 1-14 1.04 0.85 0.85 0.16 0.98 0.98 0.27 1.22 1.22 1.31 1.31 0.69 1.47 1.47 1.04 1.64 1.64 1.51
Price Each
C1HX25 FF2114T0404S C1ED69 FS6602-6-FG C1CV18 FF2114T0606S C1KT51 CF-08Z C1CV19 FF2114T0808S
11/16-16 1.15 0.98 0.98 0.26 13/16-16 1.49 1.10 1.10 0.33
Fluid Conveying
FF2114T Female ORS / ORS / ORS Tee
C1ED66 FS6602-10-FG C1ED67 FS6602-12-FG C1ED68 FS6602-16-FG
0.75 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12
Note: FS6602 is Brennan model. FS6602-*FG is a forged Brennan model. ORS O-Rings page 1098 Note: CF is Eaton-Winner model. Catalog Part No. C1JA67 A B Aeroquip Model Thread T1 Thread T2 Thread T3 (in) (in) FF1898T0606S 11/16-16 11/16-16 11/16-16 1.96 0.98 Price Each
Wt. 0.24
FF1898T ORS / ORS / ORS Tee

Catalog Part No. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 9/16-18 13/16-16 9/16-18 13/16-16 0.50 A (in) 0.85 0.85 B (in) Wt. 0.16 0.38 Price Each
C1ED59 FS6600-04-04-FG 0.25 C1ED63 FS6600-8-FG
Note: FS6600 is Brennan model. FS6600-*FG is a forged Brennan model. ORS O-Rings page 1098
FF1857T ORS / Female ORS / ORS Tee
948
Adapters
Steel O-Ring Face Seal Accessories
Catalog Part No. C1CV70 C1CV71 Tube O.D. Aeroquip Model (in) FF9767-04S FF9767-06S FF9767-08S FF9767-10S FF9767-12S FF9767-16S FF9767-20S 0.25 0.38 0.50 0.63 0.75 1.0 1.25 1.50 A (in) 0.66 0.66 0.76 0.75 0.86 0.87 1.02 1.02 1.08 1.08 1.10 1.10 1.10 1.10 1.10 0.40 1.02 0.50 0.34 0.13 0.08 0.03 Price Each
Thread T 9/16-18 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-14 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12 1-11/16-12 1-11/16-12 2-12
Wt.
C1KR62 4F-04Z C1KR63 4F-06Z C1KR64 4F-08Z
FF9767 ORS Plug
C1CV72 C1CV73 C1CV74 C1CV75 C1ZX85
C1KR65 4F-10Z C1KR66 4F-12Z C1KR67 4F-16Z C1KR68 4F-20Z C1FK57 FF9767-24S
0.23
Note: ORS O-Rings page 1098 Note: 4F is Eaton-Winner model. Tube O.D. Aeroquip Model (in) FF9863-04S FF9863-06S FF9863-08S FF9863-10S FF9863-12S FF9863-16S FF9863-20S 0.25 0.38 0.50 0.63 0.75 1.0 1.25 1.50
Catalog Part No. C1CV76
Thread T 9/16-18 9/16-18 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-14 1-3/16-12 1-3/16-12 1-7/16-12 1-7/16-12 1-11/16-12 1-11/16-12 2-12
A (in) 0.75 0.66 0.91 0.75 0.98 0.90 1.16 1.00 1.18 1.10 1.30 1.17 1.34 1.17 1.17
Wt. 0.05 0.07 0.12
Price Each
Fluid Conveying
C1KT20 9F-04GMZ C1KT21 9F-06GMZ
FF9863 ORS Cap Assembly
C1CV77 C1CV78 C1CV79 C1CV80 C1CV81 C1ZX84
C1KT22 9F-08GMZ C1KT23 9F-10GMZ C1KT24 9F-12GMZ C1KT25 9F-16GMZ C1KT26 9F-20GMZ C1FK58 FF9863-24S
0.18 0.31 0.46 0.30 0.89
Note: 9F is Eaton-Winner model.
949
Adapters
Steel Pipe to Pipe

Catalog Part No. C1BA66 C1BA71 C1BA72 Aeroquip Model 2083-2-2S 2083-4-2S 2083-4-4S Thread P1 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2 2-11-1/2 Thread P2 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2 2-11-1/2 A (in) 1.06 1.06 1.26 1.45 1.38 1.27 1.45 1.46 1.45 1.50 1.70 1.63 1.70 1.71 1.89 1.85 1.93 1.96 1.96 1.93 2.17 2.15 2.40 2.34 2.52 2.45 2.56 2.48 2.59 2.72 2.61 2.80 2.82 1.21 0.76 0.61 0.82 0.58 0.39 0.35 0.23 0.24 0.16 0.13 0.16 0.09 0.12 0.08 0.55 0.05 Wt. 0.03 Price Each
C1KQ80 1N-02Z
2083 Male Pipe / Male Pipe Hex Nipple
C1KQ83 1N-04Z C1DX63 5404-06-02 C1BA73 2083-6-4S 2083-6-6S 2083-8-4S 2083-8-6S 2083-8-8S C1KQ81 1N-04-06Z C1BA74 C1BA75 C1BA76 C1BA77 C1KQ85 1N-06Z C1KQ82 1N-04-08Z C1KQ84 1N-06-08Z C1KQ87 1N-08Z C1KQ86 1N-08-12Z C1BA63 C1BA62 2083-12-8S 2083-12-12S
Fluid Conveying
C1KQ89 1N-12Z C1KQ88 1N-12-16Z C1BA64 C1BA65 C1BA67 C1BA68 2083-16-12S 2083-16-16S 2083-20-16S 2083-20-20S C1KQ91 1N-16Z C1KQ90 1N-16-20Z C1KQ92 1N-20Z
C1HJ52 5404-24-20 C1KQ93 1N-24Z C1BA69 2083-24-24S C1KQ94 1N-32Z C1BA70 2083-32-32S Note: 5404 is Brennan model. Note: 1N is Eaton-Winner model. Catalog Part No.
Aeroquip Model
Thread P 3/8-18 3/8-18
A (in) 4.0 6.0
Wt. 0.25 0.39
Price Each
C1BA82 2084-6S-4 C1BA83 2084-6S-6
2084 Male Pipe / Male Pipe Nipple
950
Adapters
Steel Pipe to Pipe
Catalog Part No. C1BA48 C1BA49 C1BA50 Aeroquip Model 2081-4-2S 2081-6-2S 2081-6-4S Thread P1 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2 Thread P2 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 3/8-18 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 A (in) 0.87 0.85 0.85 0.85 0.87 1.10 1.10 1.10 1.10 1.12 1.17 1.18 1.20 1.17 1.17 1.20 1.36 1.36 1.40 1.44 1.36 1.47 1.47 1.52 1.47 1.61 1.57 1.57 1.61 1.57 1.63 1.57 1.61 1.57 1.75 1.77 1.75 1.75 1.75 1.77 1.12 1.43 0.55 1.78 0.80 0.98 1.18 1.11 0.52 0.29 0.74 0.65 0.41 0.35 0.22 0.20 0.24 0.09 0.15 0.12 0.04 0.07 0.06 Wt. Price Each
C1KS29 5N-04-02Z
2081 Male Pipe / Female Pipe Bushing
C1KS31 5N-06-04Z C1BA51 2081-8-2S C1BA52 C1BA53 C1BA34 2081-8-4S 2081-8-6S 2081-12-4S C1KS33 5N-08-04Z C1KS34 5N-08-06Z C1KS36 5N-12-04Z C1KS37 5N-12-06Z C1BA35 C1BA36 C1BA38 C1BA39 2081-12-6S 2081-12-8S 2081-16-6S 2081-16-8S
C1KS38 5N-12-08Z
C1KS40 5N-16-08Z C1KS41 5N-16-12Z C1BA37 C1BA40 C1BA41 2081-16-12S 2081-20-12S 2081-20-16S C1DX74 5406-20-08 C1KS42 5N-20-12Z C1KS43 5N-20-16Z C1DX76 5406-24-06 C1EF63 5406-24-08 C1KS44 5N-24-12Z C1BA42 2081-24-12S C1KS45 5N-24-16Z C1BA43 C1BA44 2081-24-16S 2081-24-20S C1KS46 5N-24-20Z C1BA45 2081-32-16S C1KS47 5N-32-16Z C1BA46 2081-32-20S C1KS48 5N-32-20Z C1BA47 2081-32-24S C1KS49 5N-32-24Z Note: 5406 is Brennan model. Note: 5N is Eaton-Winner model.
951
Adapters
Steel Pipe to Pipe

Catalog Part No. Aeroquip Model Thread P1 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 Thread P2 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 1/2-14 3/8-18 1/2-14 3/4-14 3/4-14 1-11-1/2 3/8-18 1/2-14 3/4-14 1-11-1/2 1-11-1/2 3/4-14 1-11-1/2 1-1/4-11-1/2 1-11-1/2 1-1/4-11-1/2 A (in) 1.04 1.00 1.21 1.39 1.44 1.44 1.68 1.44 1.44 1.68 1.72 1.85 1.87 1.93 1.93 2.18 1.63 1.94 1.93 2.18 2.18 2.12 2.37 2.46 2.52 2.49 0.57 0.46 0.66 0.98 0.86 0.93 0.38 0.60 0.28 0.30 0.40 0.17 0.28 0.12 0.24 0.10 0.24 0.25 0.09 0.10 Wt. 0.06 Price Each
C1AY30 2040-2-2S C1KS28 5N-02-04Z C1AY31 2040-2-4S C1AY32 2040-4-4S
2040 Male Pipe / Female Pipe
C1KS30 5N-04-06Z C1AY33 2040-4-6S C1AY34 2040-4-8S
C1DX65 5405-06-04 C1AY35 2040-6-6S C1AY36 2040-6-8S C1KS32 5N-06-08Z C1DX66 5405-08-06 C1AY38 2040-8-8S C1KS35 5N-08-12Z C1AY37 2040-8-12S C1DX67 5405-08-16 C1DX68 5405-12-06 C1DX69 5405-12-08 C1AY26 2040-12-12S C1KS39 5N-12-16Z C1AY27 2040-12-16S C1DX71 5405-16-12 C1AY28 2040-16-16S C1AY29 2040-16-20S C1DX72 5405-20-16 C1DV63 2040-20-20S Note: 5405 is Brennan model. Note: 5N is Eaton-Winner model. Catalog Part No. C1BA58 C1BA59
Fluid Conveying
Aeroquip Model 2082-2S 2082-4S 2082-6S 2082-8S 2082-12S 2082-16S 2082-20S 2082-24S
Thread P 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2
A (in) 0.63 0.56 0.79 0.75 0.78 1.06 0.97 1.16 1.06 1.44 1.25 1.52 1.28 1.69 1.31
Wt. 0.02 0.04 0.07 0.44 0.25 0.45 0.79 0.99
Price Each
C1KR78 4N-02Z C1KR79 4N-04Z
2082 Male Pipe Plug
C1BA60 C1BA61
C1KR81 4N-08Z C1KR82 4N-12Z C1BA54 C1BA55 C1BA56 C1BA57 C1KR83 4N-16Z C1KR84 4N-20Z C1KR85 4N-24Z Note: 4N is Eaton-Winner model.
952
Adapters
Steel Pipe to Pipe
Catalog Part No. C1BC88 C1BC89 C1BC90 C1BC91 C1FA72 Aeroquip Model 2222-2S 2222-4S 2222-6S 2222-8S 5406-HP-12 Thread P 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 A (in) B (in) Wt. 0.01 0.07 0.05 1.50 0.10 0.21 0.39 0.46 Price Each
0.30 0.19 0.46 0.25 0.46 0.31 0.61 0.38 0.62 0.56 0.77 0.63 0.83 0.75 0.83 1.00
2222 Male Pipe Plug Countersunk Hex
C1EH38 5406-HP-16 C1EX75 5406-HP-20 C1FN19 5406-HP-24 Note: 5406-HP is Brennan model. Catalog Part No.
Brennan Model
Thread A1 1/2-14 3/4-14
L (in) Wt. 1.00 1.13 0.11 0.19
Price Each
C1KK42 5406-C-08 C1FD36 5406-C-12
5406-C Female Pipe Cap
Fluid Conveying
Catalog Part No.
Aeroquip Model
Thread P1 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2
Thread P2 1/8-27 1/4-18 1/8-27 1/4-18 1/4-18 3/8-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 1/4-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 1/2-14 3/4-14 3/4-14 1-11-1/2 3/4-14
A (in) 0.94 1.12 1.0 1.25 1.26 1.25 1.25 1.36 1.31 1.56 1.56 1.55 1.42 1.36 1.63 1.61
Wt. 0.04 0.05 0.20 0.09
Price Each
C1AY61 2045-2-2S C1AY62 2045-2-4S C1AK52 1404-02-04 C1AY66 2045-4-4S 2045-4-6S 2045-6-4S 2045-6-6S
2045 Female Pipe Swivel / Male Pipe
C1KR38 2NU-04Z C1AY67 C1AY68 C1AY69
0.10 0.10 0.15 0.19 0.20 0.20 0.16 0.22 0.22
C1KR39 2NU-06Z C1KR40 2NU-08-06Z C1AY70 2045-6-8S C1AK56 1404-12-06 C1AK53 1404-04-08 C1AY72 2045-8-6S C1KR41 2NU-08Z C1AY73 2045-8-8S C1BK20 2H0108-08R.031 0.031 Orifice C1AY71 2045-8-12S C1AK55 1404-08-12 C1KR42 2NU-12Z C1AY57 2045-12-12S C1AY58 2045-12-16S C1AY59 2045-16-12S
1.61 1.75 1.75 1.73 1.98 1.75
0.29 0.50 0.35 0.43 0.42
953
Adapters
Steel Pipe to Pipe

Catalog Part No. C1AY60 Aeroquip Model 2045-16-16S Thread P1 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2 Thread P2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2 A (in) 2.00 2.07 2.02 2.06 2.34 2.09 2.46 2.19 2.54 1.16 0.99 0.70 0.86 Wt. 0.51 Price Each
C1KR43 2NU-16Z C1HH65 1404-20-16 C1AY63 2045-20-20S C1KR44 2NU-20Z C1AK58 1404-20-24 C1KR45 2NU-24Z C1AY64 2045-24-24S C1KR46 2NU-32Z
2045 Female Pipe Swivel / Male Pipe
C1AY65 2045-32-32S 2-11-1/2 2-11-1/2 2.38 1.73 Note: 1404 is Brennan model. 2H010 is Cross Manufacturing model with restrictor orifice. Note: 2NU is Eaton-Winner model. Catalog Part No. C1AY80 A (in) 0.88 1.12 1.55 1.25 1.12 1.36 1.50 1.53 1.62 1.92 2.03 2.00 2.00 2.17 2.00 2.19 2.30 1.76 1.18 0.57 0.88 Price Each
Thread P1 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2
Thread P2 1/8-27 1/4-18 3/4-14 1-4/18 3/8-18 3/8-18 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2
Wt. 0.05 0.13 0.19 0.18 0.17 0.23 0.26 0.29 0.39 0.67
C1AY76 2046-2-2S C1GD20 1405-08-04 C1DU77 1405-04-06 C1AY82 C1AY83 2046-6-6S 2046-8-8S
Fluid Conveying
2046 Female Pipe Swivel / Female Pipe
C1DU78 1405-06-08 C1DU80 1405-12-08 C1AY74 2046-12-12S C1EF52 1405-12-16 C1KT17 7NU-16SZ C1AY75 2046-16-16S C1AY78 2046-20-20S
C1KT18 7NU-20SZ C1AY79 2046-24-24S C1KT19 7NU-24SZ C1DV69 2046-32-32S
Note: 1405 is Brennan model. Note: 7NU is Eaton-Winner model. Catalog Part No. C1BB62 A (in) 0.75 0.94 1.13 1.14 1.13 1.13 1.13 1.14 1.50 1.50 1.50 0.50 0.45 0.20 0.20 0.12 0.10 Price Each
Aeroquip Model 2096-2S 2096-4S
Thread P1 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14
Thread P2 1/8-27 1/8-27 1/4-18 1/4-18 1/8-27 1/4-18 3/8-18 3/8-18 1/4-18 3/8-18 1/2-14
Wt. 0.05
C1KS88 7N-02Z
C1BB63
C1KS89 7N-04Z
2096 Female Pipe Coupling
C1BR64 5000-06-02 C1BR65 5000-06-04 C1BB64 2096-6S C1KS90 7N-06Z C1BR66 5000-08-04 C1BR67 5000-08-06 C1KS91 7N-08Z
954
Adapters
Steel Pipe to Pipe
Catalog Part No. C1BB65 C1BB58 Aeroquip Model 2096-8S 2096-12S Thread P1 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 Thread P2 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 A (in) 1.50 1.53 1.53 1.54 1.89 1.89 1.93 1.93 1.93 1.93 1.28 0.85 0.59 Wt. 0.23 0.40 0.38 Price Each
C1BR68 5000-12-08 C1KS92 7N-12Z C1KS93 7N-16Z
C1BB59
2096-16S
C1KS94 7N-20Z C1BB60 2096-20S C1KS95 7N-24Z
C1BB61 2096-24S 1-1/2-11-1/2 Note: 5000 is Brennan model. Note: 7N is Eaton-Winner model. Catalog Part No.
Aeroquip Model
Thread P1 1/4-18 1/2-14
Thread P2 1/4-18 1/2-14
A (in)
B (in)
Wt. 0.10 0.25
Price Each
C1BD43 2247-4-4S C1BD44 2247-8-8S
0.85 0.86 1.13 1.17
Fluid Conveying
2247 Male Pipe / Male Pipe 45 Elbow

Catalog Part No. Aeroquip Model Thread P1 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 Thread P2 1/4-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1.0 A (in) B (in) Wt. 0.12 0.20 0.27 1.25 0.52 0.42 0.60 1.27 1.38 1.82 Price Each
C1AZ18 2049-4-4S C1AZ19 2049-6-6S C1JC25 2049-6-8S C1AZ20 2049-8-8S C1DV20 1503-12-08
0.69 0.81 0.75 1.06 0.92 1.41 0.88 1.31 1.15 0.88 1.38 1.09 1.54 1.06 1.50 1.07 1.75 1.67 1.25 1.75 1.38 1.94
2049 Female Pipe Swivel / Male Pipe 45 Elbow
C1KR47 2NU4-12Z C1AZ14 2049-12-12S C1KR48 2NU4-16Z C1AZ15 2049-16-16S C1DV23 1503-16-20 C1KR49 2NU4-20Z C1AZ17 2049-20-20S C1DV24 1503-24-24
Note: 1503 is Brennan model. Note: 2NU4 is Eaton-Winner model.
Catalog Part No.
Aeroquip Model
Thread P1 3/4-14 1-11-1/2
Thread P2 3/4-14 1-11-1/2
A (in)
B (in)
Wt. 0.74 1.04
Price Each
2050 C1FA55 2050-12-12S Female Pipe Swivel / Female Pipe 45 C1HK67 2050-16-16S Elbow
1.10 1.53 1.26 1.53
955
Adapters
Steel Pipe to Pipe

Catalog Part No. Aeroquip Model Thread P1 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 Thread P2 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 A (in) B (in) Wt. 0.07 0.16 0.24 0.44 0.61 1.12 Price Each
C1BB12 2088-2-2S C1KS50 5N4-04Z C1BB13 2088-4-4S C1BB14 2088-6-6S C1KS51 5N4-08Z C1BB15 2088-8-8S
0.56 0.73 0.79 0.87 1.01 0.92 1.15 0.99 1.10 1.25 1.28 1.33 1.18 1.44 1.34 1.37 1.12 1.72
2088 Female Pipe / Male Pipe 45 Elbow
C1KS52 5N4-12Z C1BB11 2088-12-12S C1FH86 2088-16-16S Note: 5N4 is Eaton-Winner model.
Catalog Part No.
Aeroquip Model
Thread P1 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
Thread P2 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/4-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
A (in)
B (in)
Wt. 0.04 0.10 0.10 0.17 0.17 0.03 0.25 0.25 0.40 0.40
Price Each
C1BA87 2085-2-2S C1DX77 5500-04-02 C1BA88 2085-4-4S C1KQ95 1N9-04Z C1BA89 2085-6-4S
0.76 0.78 1.09 0.84 1.09 1.09 1.00 1.00 1.22 1.22 1.22 1.22 1.22 1.22 1.47 1.28 1.47 1.25 1.47 1.47 1.47 1.47 1.50 1.54 1.59 1.59 1.73 1.73 1.97 1.97 1.97 1.97 2.38 2.38 2.64 2.64
Fluid Conveying
2085 Male Pipe / Male Pipe 90 Elbow
C1KQ96 1N9-06Z C1BA90 2085-6-6S C1DX78 5500-08-04 C1BA91 2085-8-6S C1KQ97 1N9-08Z C1BA92 2085-8-8S C1BA85 2085-12-8S C1BA84 2085-12-12S C1KQ98 1N9-12Z C1KQ99 1N9-16Z C1BA86 2085-16-16S C1DX79 5500-20-20 C1EF64 5500-24-24
0.65 1.27 1.54
Note: 5500 is Brennan model. Note: 1N9 is Eaton-Winner model. Catalog Part No. C1BB19 A (in) B (in) Price Each
Thread P1 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14
Thread P2 1/8-27 1/8-27 1/4-18 1/8-27 1/4-18 1/4-18 3/8-18 1/4-18 3/8-18 3/8-18 3/8-18
Wt. 0.05 0.13 0.12 0.14 0.21 0.17 0.25
0.78 0.66 0.96 0.70 0.87 0.88 1.05 0.63 1.11 0.88 1.10 0.88 1.13 1.02 1.22 1.01 1.23 1.02 1.32 0.98 1.48 0.98
C1KS53 5N9-02Z C1BB20 2089-2-4S C1BB23 2089-4-2S C1BB24 2089-4-4S C1KS54 5N9-04Z
2089 Male Pipe / Female Pipe 90 Elbow
C1BB25 2089-4-6S C1BB26 2089-6-4S C1BB27 2089-6-6S C1KS55 5N9-06Z C1KS56 5N9-08-06Z
956
Adapters
Steel Pipe to Pipe
Catalog Part No. Aeroquip Model Thread P1 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 Thread P2 1/2-14 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 A (in) B (in) Wt. 0.24 0.23 0.35 0.38 0.77 Price Each
C1BB28 2089-6-8S C1BB29 2089-8-6S C1BB30 2089-8-8S C1KS57 5N9-08Z C1BB17 2089-12-8S C1BB16 2089-12-12S C1KS58 5N9-12Z
1.27 1.23 1.47 1.02 1.47 1.23 1.62 1.23 1.59 1.35 1.69 1.36 1.78 1.36 2.15 1.62 1.97 1.62 2.38 1.68 2.48 1.70 2.38 1.70 2.64 2.08
2089 Male Pipe / Female Pipe 90 Elbow
C1KS59 5N9-16Z C1BB18 2089-16-16S C1DX81 5502-20-16 C1KS60 5N9-20Z C1BB21 2089-20-20S
1.11 1.07 2.00 3.71
C1BB22 2089-24-24S 1-1/2-11-1/2 Note: 5502 is Brennan model. Note: 5N9 is Eaton-Winner model. Catalog Part No.
Aeroquip Model
Thread P1 1/4-18 3/8-18 1/2-14
Thread P2 1/4-18 3/8-18 1/2-14
A (in)
B (in)
Wt. 0.20 0.32 0.47
Price Each
C1BD55 2252-4-4S C1BD56 2252-6-6S C1BD57 2252-8-8S
1.61 0.88 1.69 1.02 2.01 1.23
Fluid Conveying
2252 Male Pipe Swivel / Female Pipe 90 Elbow

Catalog Part No. C1AY88 C1AY91 A (in) B (in) Price Each
Aeroquip Model 2047-2-2S 2047-4-4S
Thread P1 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14
Thread P2 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 3/8-18 1/2-14 3/4-14 3/8-18 1/2-14 1/2-14
Wt. 0.07 0.17 0.13 0.23 0.41 0.15 0.25
0.69 0.94 0.75 1.19 0.78 1.19 0.83 0.84 1.50 0.92 1.75 1.50 0.94 1.22 0.94 1.50 1.0 1.0 1.0 1.81 1.67 1.81 1.47 1.02 2.00
C1DU82 1501-02-04 C1KR50 2NU9-04Z C1AY92 2047-4-6S
C1DU85 1501-08-04 C1AK73 1501-0406 C1KR51 2NU9-06Z C1AY93 C1AY94 2047-6-6S 2047-6-8S
0.29 0.75 0.32 0.33
C1DU86 1501-12-06 C1AY96 2047-8-6S C1AY97 2047-8-8S C1KR52 2NU9-08Z
957
Adapters
Steel Pipe to Pipe

Catalog Part No. Aeroquip Model Thread P1 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 Thread P2 3/4-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 A (in) B (in) Wt. 0.52 0.57 0.92 1.32 0.83 2.16 2.10 Price Each
C1AY95 2047-8-12S C1AY86 2047-12-8S C1KR53 2NU9-12Z C1AY84 2047-12-12S C1AY85 2047-12-16S
1.12 2.00 1.10 1.81 1.73 1.19 2.00 1.28 2.38 1.97 1.44 2.38 1.62 2.62 2.34 1.78 2.81
C1KR54 2NU9-16Z C1AY87 2047-16-16S C1AY89 2047-20-20S C1KR55 2NU9-24Z
C1AY90 2047-24-24S 1-1/2-11-1/2 Note: 1501 is Brennan model. Note: 2NU9 is Eaton-Winner model. Catalog Part No.
Aeroquip Model
Thread P1 1/4-18 3/8-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2
Thread P2 1/4-18 3/8-18 1/2-14 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2
A (in)
B (in)
Wt. 0.17 0.27 0.34 0.44 0.85 1.38 1.79
Price Each
C1AZ11 2048-4-4S C1AZ12 2048-6-6S C1DU97 1502-08-06 C1AZ13 2048-8-8S C1AY98 2048-12-12S C1AY99 2048-16-16S
0.78 0.88 0.94 1.02 1.25 1.0 1.03 1.23 1.27 1.36 1.46 1.62 1.75 2.0
Fluid Conveying
2048 Note: 1502 is Brennan model. Female Pipe Swivel / Female Pipe 90 Elbow
Catalog Part No. Aeroquip Model C1BA95 2087-2-2S C1DX82 5504-04-02
C1DV70 2048-20-20S
Thread P1 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
Thread P2 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
A (in)
B (in)
Wt. 0.06 0.15 0.14
Price Each
0.66 0.68 0.88 0.72 0.88 0.88 0.89 0.89 1.02 1.02 1.02 1.02 1.23 1.01 1.23 1.23 1.22 1.22 1.34 1.34 1.36 1.36 1.62 1.39 1.65 1.65 1.62 1.62
C1BA97 2087-4-4S C1KS96 7N9-04PKZ C1KS97 7N9-06PKZ C1BA98 2087-6-6S C1HZ26 2087-8-6S 2087 Female Pipe / Female Pipe 90 Elbow C1BA99 2087-8-8S C1KS98 7N9-08PKZ C1KS99 7N9-12PKZ C1BA93 2087-12-12S C1JC34 2087-16-12S C1KT11 7N9-16PKZ
0.28 0.35 0.36
0.91 1.00 1.04 1.47 2.15
C1BA94
2087-16-16S
C1DX88 5504-20-12 C1DX89 5504-20-16 C1BA96 2087-20-20S C1HD43 2087-24-24S
1.70 1.70 2.08 2.08
1.25 3.60
Note: 5504 is Brennan model. Note: 7N9 is Eaton-Winner model.
958
Adapters
Steel Pipe to Pipe
Catalog Part No. Aeroquip Model Thread P 1/4-18 3/8-18 3/4-14 A (in) 1.09 1.22 1.64 Wt. 0.13 0.27 0.53 Price Each
C1BD70 2257-4-4S C1BD71 2257-6-6S C1BD69 2257-12-12S
2257 Male Pipe Tee

Catalog Part No. Aeroquip Model Thread P1 1/4-18 3/8-18 1/2-14 3/4-14 Thread P2 1/4-18 3/8-18 1/2-14 3/4-14 A (in) B (in) Wt. 0.19 0.28 0.47 0.90 Price Each
C1BD66 2256-4-4S C1BD67 2256-6-6S C1BD68 2256-8-8S C1BD65 2256-12-12S
1.11 0.88 1.23 1.02 1.49 1.23 1.69 1.36
2256 Male Pipe / Female Pipe / Male Pipe Tee

Catalog Part No. Aeroquip Model Thread P1 1/4-18 1/2-14 3/4-14 Thread P2 1/4-18 1/2-14 3/4-14 A (in) B (in) C (in) Wt. 0.23 0.75 0.94 Price Each
C1BB55 2093-4-4S C1BB57 2093-8-8S C1BB54 2093-12-12S
1.09 0.88 1.09 1.47 1.23 1.47 1.59 1.36 1.59
Fluid Conveying
2093 Male Pipe / Male Pipe / Female Pipe Tee

Catalog Part No. C1BB49 C1BB51 C1BB52 Aeroquip Model 2092-2-2S 2092-4-4S 2092-6-6S Thread P1 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 Thread P2 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 A (in) B (in) C (in) Wt. 0.07 0.18 0.24 0.41 0.71 1.19 2.94 Price Each 0.78 0.66 0.66 1.12 0.98 0.98 1.09 0.88 0.88 1.32 1.06 1.06 1.22 1.02 1.03 1.67 1.38 1.38 1.47 1.23 1.23 1.78 1.46 1.46 1.59 1.36 1.36 2.15 1.73 1.73 1.97 1.62 1.62
C1KT64 HN-04Z C1KT65 HN-06Z C1KT66 HN-08Z 2092 Male Pipe / Female Pipe / Female Pipe C1BB53 2092-8-8S C1KT67 HN-12Z Tee C1BB47 2092-12-12S C1KT68 HN-16Z C1BB48 2092-16-16S C1BB50 2092-20-20S
1-1/4-11-1/2 1-1/4-11-1/2 2.83 1.95 1.76
Note: HN is Eaton-Winner model.
959
Adapters
Steel Pipe to Pipe

Catalog Part No. Aeroquip Model Thread P1 1/2-14 Thread P2 1/2-14 A (in) 1.0 B (in) 1.81 Wt. 0.57 Price Each
C1BD59 2254-8-8S
2254 Female Pipe Swivel / Male Pipe/ Female Pipe Swivel Tee
Catalog Part No. Aeroquip Model Thread P 3/8-18 A (in) B (in) Wt. 0.34 Price Each
C1HK84 2255-6-6S
1.09 1.09
2255 Female Pipe Swivel (NPSM) Tee

Catalog Part No. Aeroquip Model Thread P1 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 Thread P2 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 A (in) B (in) Wt. 0.07 0.19 0.25 0.53 0.70 1.23 Price Each
Fluid Conveying
C1BB43 2091-2-2S C1KT69 JN-04Z C1BB44 2091-4-4S C1KT70 JN-06Z C1BB45 2091-6-6S C1KT71 JN-08Z C1BB46 2091-8-8S 2091 Male Pipe / Female Pipe / Female Pipe C1KT72 JN-12Z C1BB41 2091-12-12S Tee C1KT73 JN-16Z C1BB42 2091-16-16S Note: JN is Eaton-Winner model.
0.78 0.66 1.10 0.88 1.09 0.88 1.32 0.98 1.22 1.02 1.62 1.23 1.47 1.23 1.78 1.36 1.59 1.36 2.15 1.62 1.97 1.62
Catalog Part No.
Aeroquip Model
Thread P 1/8-27 1/4-18 1/4-18
A (in) 0.66 0.79 0.88
Wt. 0.07 0.19
Price Each
C1BB35 2090-2-2S C1KT59 GN-04PKZ C1BB38 2090-4-4S
2090 Female Pipe Tee
960
Adapters
Steel Pipe to Pipe
Catalog Part No. C1BB39 C1BB40 Aeroquip Model 2090-6-6S 2090-8-8S 2090-12-12S 2090-16-16S Thread P 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 A (in) 1.02 1.02 1.22 1.23 1.34 1.36 1.65 1.62 1.7 2.08 1.40 1.45 5.00 0.69 0.79 0.24 Wt. Price Each
C1KT60 GN-06PKZ C1KT61 GN-08PKZ C1KT62 GN-12PKZ
C1BB33 C1BB34
C1KT63 GN-16PKZ C1BB36 2090-20-20S C1BB37 2090-24-24S Note: GN is Eaton-Winner model. Catalog Part No.
Aeroquip Model
Thread P 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2
A (in) 0.88 1.02 1.23 1.36 1.62
Wt. 0.24 0.33 0.50 0.95 1.45
Price Each
C1BA30 2080-4-4S C1BA31 2080-6-6S C1BA32 2080-8-8S C1BA27 2080-12-12S C1BA28 2080-16-16S
Note: 5652 is Brennan model. 5652-*-FG is forged Brennan model.
Fluid Conveying
2080 Female Pipe Cross
961
Adapters
Steel Pipe to 37 Flare

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.13 0.19 0.25 0.31 0.38 0.25 0.31 0.38 A (in) 1.11 1.14 1.22 1.20 1.22 1.24 1.43 1.42 1.42 1.43 1.43 1.54 1.53 1.42 1.42 1.42 1.42 1.43 1.57 1.53 1.70 1.63 1.68 1.69 1.63 1.79 1.73 1.89 1.89 2.06 2.06 2.09 1.75 1.72 1.75 1.85 1.83 1.95 1.93 2.06 2.06 2.11 2.11 2.20 2.15 2.25 2.25 2.28 2.30 0.50 0.41 0.75 0.75 0.37 0.29 0.23 0.28 0.05 0.32 0.18 0.20 0.30 0.19 0.17 0.14 0.12 0.17 0.09 0.09 0.10 0.11 0.06 0.06 0.07 0.04 0.05 Price Each
Thread P 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18
Thread T 5/16-24 3/8-24 7/16-20 7/16-20 1/2-20 9/16-18 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-3/16-12 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 7/8-14 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12
Wt. 0.02 0.03 0.04
C1BF59 2404-02-02 C1AU86 2021-2-3S C1AU88 2021-2-4S C1KP39 1JN-04-02Z
2021 Male Pipe / 37 Male Flare
C1AU89 2021-2-5S C1AU90 2021-2-6S C1KP42 1JN-04Z C1AV12 C1AV16 2021-4-4S 2021-4-6S
C1AV14 2021-4-5S C1KP43 1JN-06-04Z C1KP47 1JN-08-04Z C1AV18 C1AV21 2021-4-8S 2021-6-4S
0.50 0.25 0.31 0.38 0.50 0.63 0.25 0.38 0.50
1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14
C1KP40 1JN-04-06Z C1AV22 2021-6-5S C1KP46 1JN-06Z C1AV24 2021-6-6S 2021-6-8S 2021-6-10S C1KP48 1JN-08-06Z
Fluid Conveying
C1AV26 C1AV20
C1KP41 1JN-04-08Z C1AV31 2021-8-4S C1AV33 C1AV35 2021-8-6S 2021-8-8S C1KP44 1JN-06-08Z C1KP50 1JN-08Z
C1KP51 1JN-10-08Z C1AV28 C1AV30 2021-8-10S 2021-8-12S 0.63 0.75 0.88 0.25 0.38 0.50 0.63
1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14
C1KP53 1JN-12-08Z C1BF62 2404-14-08 C1BF60 2404-04-12 C1KP45 1JN-06-12Z C1AU79 C1AU81 C1AU74 2021-12-6S 2021-12-8S 2021-12-10S
C1KP49 1JN-08-12Z
C1KP52 1JN-10-12Z C1KP56 1JN-12Z C1AU76 C1AU78 2021-12-12S 2021-12-16S 0.75 1.0 1.25 0.63 0.75 0.88 C1KP57 1JN-16-12Z C1BF65 2404-20-12 C1BF61 2404-10-16 C1AU82 2021-16-12S C1KP54 1JN-12-16Z C1BF64 2404-14-16 C1KP60 1JN-16Z
3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2
962
Adapters
Catalog Part No. C1AU84 C1AU85 C1KP55 Tube O.D. Aeroquip Model (in) 2021-16-16S 2021-16-20S 1JN-12-20Z 2021-20-12S 2021-20-16S 2021-20-20S 0.75 1.0 1.25 1.50 1.0 1.25 1.0 1.25 A (in) 2.30 2.48 2.42 2.40 2.36 2.40 2.40 2.45 2.45 2.65 2.65 2.51 2.58 2.55 2.56 2.68 2.68 3.09 2.86 3.08 3.11 1.90 1.35 1.01 0.81 0.63 5.00 0.93 0.56 0.83 0.67 Price Each
Thread P 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2
Thread T 1-5/16-12 1-5/8-12 1-5/8-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12 1-7/8-12 2-1/2-12 2-1/2-12
Wt. 0.45
C1KP61 1JN-20-16Z
C1AU91 C1AU92 C1AU93
C1KP58 1JN-16-20Z C1KP63 1JN-20Z C1AU94 2021-20-24S C1KP64 1JN-24-20Z C1AU95 C1AU96 2021-24-16S 2021-24-20S C1KP59 1JN-16-24Z C1KP62 1JN-20-24Z C1KP65 1JN-24Z C1AU97 C1KP66 2021-24-24S 1JN-32-24Z 1.50 1.50
1-1/2-11-1/2 1-1/2-11-1/2 2-11-1/2 2-11-1/2 2-11-1/2
C1BF67 2404-24-32 C1KP67 1JN-32Z
Fluid Conveying
C1AU99 2021-32-32S 2 Note: 2404 is Brennan model. Note: 1JN is Eaton-Winner model.
Catalog Part No.
Thread P 3/4-14
Thread T 1-1/16-12
A (in) 3.5
Wt. 0.65
Price Each
C1AV36 202113-12-12S
202113 Male Pipe / 37 Male Flare (Long)
963
Adapters

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.38 0.38 0.50 0.50 0.63 0.75 0.75 1.0 A (in) 2.03 2.12 2.19 2.36 2.57 2.71 2.92 3.91 2.92 3.27 3.11 0.79 0.53 Price Each
Thread P 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2
Thread T 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12
Wt. 0.10 0.13 0.12 0.24 0.23 0.35 0.44
C1BD19 2240-4-4S C1BD20 2240-4-6S C1DW83 2706-06-06 C1BD21 2240-6-8S
2240 C1DW84 2706-08-08 Male Pipe / Male 37 Flare Bulkhead C1BD22 2240-8-10S
C1DW85 2706-08-12 C1KS86 6NJ-12LNZ C1BD18 2240-12-12S C1KS87 6NJ-16LNZ C1DV77 2240-16-16S
Note: 2706 is Brennan model which does NOT come with locknut. 2706-LN is Brennan model with locknut. Bulkhead Locknuts (Steel) page 972 Note: 6NJ is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 0.25 0.25 0.38 0.38 0.50 0.63 0.75 0.88
Catalog Part No.
Thread P 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 3/4-14 3/4-14
Thread T 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12
A (in) 2.08 2.04 2.12 2.19 2.48 2.84 3.05 2.89
Wt. 0.13 0.12 0.13 0.17 0.31 0.44 0.70 0.67
Price Each
C1BD15 2239-2-4S
Fluid Conveying
C1EF58 2705-04-04 C1DW79 2705-04-06 C1DW80 2705-06-06
2239 Female Pipe / Male 37 Flare Bulkhead C1BD17 2239-8-10S

C1BD14 2239-12-12S C1DW81 2705-12-14
C1BD16 2239-6-8S
Note: 2705 is Brennan model which does NOT come with locknut. Bulkhead Locknuts (Steel) page 972 Tube O.D. Aeroquip Model (in) 0.19 0.25 0.31 0.19 0.25 0.31 0.38 0.50 0.13 0.25 0.38 0.50 0.25 0.38 0.50
Catalog Part No.
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14
Thread T 3/8-24 7/16-20 1/2-20 3/8-24 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 5/16-24 7/16-20 9/16-18 9/16-18 3/4-16 7/16-20 9/16-18 3/4-16 3/4-16
A (in) 0.72 1.19 0.78 1.32 1.40 1.39 1.39 1.40 1.40 1.55 1.18 1.43 1.46 1.46 1.56 1.47 1.69 1.79 1.80
Wt. 0.04 0.05 0.05 0.09 0.09 0.10 0.10 0.14 0.15 0.15 0.14 0.14 0.35 0.24 0.26
Price Each
C1AV45 2022-2-3S C1AV46 2022-2-4S C1AV47 2022-2-5S C1AV52 2022-4-3S
2022 Female Pipe / Male 37 Flare
C1KS18 5JN-04Z C1AV53 C1AV56 2022-4-4S 2022-4-6S C1AV54 2022-4-5S
C1KS19 5JN-06-04Z C1AV57 2022-4-8S C1BF70 2405-06-02 C1BF69 2405-04-06 C1AV58 2022-6-6S C1KS20 5JN-06Z C1AV59 2022-6-8S C1AV62 2022-8-4S C1AV63 2022-8-6S C1AV64 2022-8-8S C1KS21 5JN-08Z
964
Adapters
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.63 0.75 0.50 0.63 0.75 1.0 1.0 1.25 1.0 1.25 A (in) 1.89 2.05 1.85 1.59 2.06 1.78 2.32 2.35 2.40 2.38 2.49 2.42 2.46 2.62 3.00 1.52 2.45 Price Each
Thread P 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
Thread T 7/8-14 1-1/16-12 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12
Wt. 0.28 0.33 0.39 0.39 0.44 0.46
C1AV60 2022-8-10S C1AV61 2022-8-12S C1AV43 2022-12-8S C1AV40 2022-12-10S
2022 Female Pipe / Male 37 Flare
C1AV41
2022-12-12S
C1AV42 2022-12-16S C1KS23 5JN-16Z C1AV44 2022-16-16S C1BF72 2405-20-16 C1AV48 2022-20-16S C1AV49 2022-20-20S C1KS24 5JN-20Z C1KS25 5JN-24Z C1AV50 2022-24-24S
0.66 0.79 1.01 1.07
1.50
1-1/2-11-1/2 2-11-1/2
C1AV51 2022-32-32S 2 Note: 2405 is Brennan model. Note: 5JN is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 2242-2-4S 0.25 0.31 0.25 0.31 0.38 0.38 0.50 0.38 0.50 0.63 0.63 0.75
Catalog Part No. C1BD25
Thread P 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2
Thread T 7/16-20 1/2-20 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 3/4-16 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12
A (in) 0.85 0.87 1.14 1.11 1.10 1.18 1.16 1.20 1.42 1.48 1.48 1.47 1.49 1.59 1.87 1.85 2.02
Wt. 0.10 0.06 0.10 0.10 0.09
Price Each
Fluid Conveying
C1DV78 2242-2-5S C1KT12 7NJ-04SZ C1BD27 2242-4-4S
2242 C1BD28 2242-4-5S Female Pipe / Female 37 Flare Swivel C1DY72 6506-04-06
C1KT13 7NJ-06SZ C1BD29 C1BD30 C1BD33 C1BD31 C1BD23 2242-6-6S 2242-6-8S 2242-8-8S 2242-8-10S 2242-12-12S
0.13 0.15 0.20 0.23 0.25 0.41 0.40
C1BD32 2242-8-6S C1KT14 7NJ-08SZ C1DY73 6506-12-10 C1KT15 7NJ-12SZ C1KT16 7NJ-16SZ C1BD24 2242-16-16S
1.0 1.25
1-11-1/2 1-1/4-11-1/2
0.67 1.22
C1BD26 2242-20-20S
Note: 6506 is Brennan model. Note: 7NJ is Eaton-Winner model.
965
Adapters

Catalog Part No. C1AU64 Tube O.D. Aeroquip Model (in) 2018-2-4S 0.25 0.25 0.31 0.38 0.38 0.38 0.50 0.63 A (in) 1.32 1.45 1.41 1.59 1.32 1.72 1.72 1.74 1.86 1.69 1.89 0.17 2.28 2.17 1.93 2.15 2.24 2.40 2.52 2.54 2.87 2.78 2.93 1.04 1.29 0.57 0.40 0.26 0.33 0.26 0.34 0.10 0.13 0.15 0.19 Price Each
Thread P 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14
Thread T 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 7/8-14 3/4-16 3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12
Wt. 0.05 0.50 0.08 0.08
C1BX73 6505-0404 C1DY68 6505-04-05 C1AU66 2018-4-6S 2018-6-6S 2018-6-8S
2018 Male Pipe / Female 37 Flare Swivel
C1KR32 2NJ-04-06Z C1KJ48 C1AU67 C1BX74 6505-0606
C1DY69 6505-06-10 C1KR33 2NJ-06-08Z C1KR34 2NJ-08Z C1HN53 2018-8-8S C1BX76 6505-0810 C1DY70 6505-08-12 C1DY71 6505-12-10 C1AU62 2018-12-12S C1KR35 2NJ-12Z C1BX77 6505-1216 C1KR36 2NJ-16Z
0.50 0.50 0.75 0.63 0.75 1.0 1.0 1.25 1.50
1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
Fluid Conveying
C1AU63 2018-16-16S C1KR37 2NJ-20Z C1AU65 2018-20-20S C1GH64 6505-24-24
Note: 6505 is Brennan model. Note: 2NJ is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 0.19 0.25 0.31 0.38 0.25 0.38 0.50 0.25 0.38 2023-2-4S
Catalog Part No. C1AV73
Thread P 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18
Thread T 5/16-18 7/16-20 1/2-20 9/16-18 7/16-20 7/16-20 9/16-18 3/4-16 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14
A (in)
B (in)
Wt. 0.05 0.04 0.01 0.07 0.08 0.08 0.14 0.11 0.11
Price Each
C1EM91 2023-2-3S C1DV50 2023-2-5S C1DV51 2023-2-6S C1KP68 1JN4-04Z C1AV75 2023-4-4S
0.58 0.76 0.58 0.76 0.64 0.80 0.72 0.83 0.83 0.88 0.86 0.82 0.86 0.83 0.95 1.04 0.95 0.79 0.95 0.88 0.94 0.94 1.06 0.94 0.95 0.98 0.96 1.14 1.17 0.91 1.17 1.00 1.16 1.10 1.16 1.22 1.17 1.11
2023 C1AV77 2023-4-6S Male Pipe / Male 37 Flare 45 Elbow C1AV78 2023-4-8S
C1AV79 2023-6-4S C1AV80 2023-6-6S
C1KP69 1JN4-06Z C1KP70 1JN4-08-06Z C1AV81 2023-6-8S 0.50 0.63 0.38 0.50 C1HX44 2023-6-10S C1AV84 2023-8-6S C1AV85 2023-8-8S C1KP71 1JN4-08Z C1KP72 1JN4-10-08Z C1AV82 2023-8-10S 0.63 0.75 C1AV83 2023-8-12S C1KP73 1JN4-12-08Z
3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14
0.14 0.19 0.20 0.18
0.26 0.41
1-1/16-12 1.20 1.39 1-1/16-12 1.22 1.40
966
Adapters
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.50 0.63 0.75 1.0 0.75 1.0 1.0 A (in) B (in) Price Each
Thread P 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2
Thread T 3/4-16 7/8-14
Wt. 0.32 0.30 0.32 0.62 0.71
C1AV69 2023-12-8S C1HZ18 2023-12-10S C1KP74 1JN4-12Z C1AV67 2023-12-12S C1KP75 1JN4-16-12Z
1.20 1.10 1.20 1.22
1-1/16-12 1.38 1.40 1-1/16-12 1.20 1.28 1-5/16-12 1.44 1.52 1-5/16-12 1.29 1.47 1-1/16-12 1.48 1.52 1-5/16-12 1.54 1.52 1-5/16-12 1.48 1.47 1-5/8-12 1-5/8-12 1-5/8-12 1-7/8-12 2-1/2-12 1.65 1.69 1.54 1.69 1.77 1.66 1.77 1.78 2.11 2.22 1.15 1.25 1.77 3.10 0.51 0.92
2023 C1AV70 2023-16-12S Male Pipe / Male 37 Flare 45 Elbow C1KP76 1JN4-16Z
C1AV71 2023-16-16S C1DW37 2503-16-20 C1KP77 1JN4-20Z
C1AV68 2023-12-16S
1-1/4-11-1/2 1-5/16-12 1.67 1.55
C1AV74 2023-20-20S C1DW38 2503-20-24 C1FD24 2023-24-24S
1.25 1-1/4-11-1/2 1.25 1-1/2-11-1/2 1.50 1-1/2-11-1/2 2-11-1/2
C1FD25 2023-32-32S 2.00 Note: 2503 is Brennan model. Note: 1JN4 is Eaton-Winner model.
Fluid Conveying
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.38 1.0
Thread P 1/4-18 1-11-1/2
Thread T 9/16-18
A (in)
B (in)
Wt. 0.09 0.87
Price Each
C1DV67 2044-4-6S C1EF57 2505-16-16 Note: 2505 is Brennan model.
0.62 0.83
1-5/16-12 1.70 1.11
2044 Female Pipe / Male 37 Flare 45 Elbow
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.19 0.25 0.31 0.38 0.25 0.31 0.38 0.50
Thread P 1/8-27 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18
Thread T 3/8-24 7/16-20 7/16-20 1/2-20 9/16-18 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16
A (in)
B (in)
Wt. 0.07 0.06 0.07 0.10 0.11 0.07 0.15 0.20
Price Each
C1AV97 2024-2-3S C1KP80 1JN9-04-02Z C1AV99 2024-2-4S C1AW11 2024-2-5S C1AW12 2024-2-6S C1AW21 2024-4-4S C1KP83 1JN9-04Z C1AW22 2024-4-5S 2024 Male Pipe / Male 37 Flare 90 Elbow C1KP84 1JN9-06-04Z C1AW24 2024-4-6S C1AW25 2024-4-8S
0.78 0.83 0.83 0.96 0.78 0.89 0.80 0.95 0.90 1.06 1.09 1.05 1.00 1.05 1.09 1.05 1.00 1.06 1.09 1.06 1.22 1.25
967
Adapters

Catalog Part No. Tube O.D. Aeroquip Model (in) A (in) B (in) Price Each
Thread P 1/4-18 3/8-18
Thread T 3/4-16 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14
Wt.
C1KP88 1JN9-08-04Z C1KP81 1JN9-04-06Z C1AW28 2024-6-4S C1AW31 2024-6-6S C1KP87 1JN9-06Z C1AW33 2024-6-8S C1KP89 1JN9-08-06Z 0.50 0.63 0.75 0.25 0.38 0.50 0.25 0.38
1.12 1.26 1.22 1.16 1.22 0.98 1.22 1.14 1.22 1.14 1.22 1.25 1.22 1.26 1.28 1.45 1.47 1.32 1.47 1.02 1.47 1.13 1.44 1.26 1.47 1.33 1.47 1.37 1.47 1.49 1.47 1.45 0.27 0.46 0.35 0.39 0.39 0.25 0.23 0.24 0.26 0.44 0.05 0.14 0.16
3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14
C1AW26 2024-6-10S 2024 Male Pipe / Male 37 Flare 90 Elbow C1AW27 2024-6-12S C1KP82 1JN9-04-08Z C1AW36 2024-8-4S C1AW38 2024-8-6S C1KP85 1JN9-06-08Z C1AW40 2024-8-8S C1KP92 1JN9-08Z C1KP93 1JN9-10-08Z C1AW34 2024-8-10S C1KP95 1JN9-12-08Z C1AW35 2024-8-12S
1-1/16-12 1.33 1.66
0.63 0.75 0.25 0.38 0.50
1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14
1-1/16-12 1.57 1.74 1-1/16-12 1.59 1.66 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1.59 1.35 1.59 1.31 1.73 1.40 1.59 1.42 1.73 1.49 1.73 1.61 1.59 1.54 0.41 0.44 0.66
Fluid Conveying
C1BG79 2501-04-12 C1AV90 2024-12-6S C1KP86 1JN9-06-12Z C1AV91 2024-12-8S C1KP90 1JN9-08-12Z C1KP94 1JN9-10-12Z C1AV86 C1AV88 2024-12-10S 2024-12-12S 2024-12-16S
0.63 0.75 1.0
3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2
1-1/16-12 1.59 1.66 1-1/16-12 1.73 1.74 1-5/16-12 1.78 1.81 1-5/16-12 1.78 1.93 3/4-16 3/4-16 7/8-14 1.97 1.63 1.95 1.47 1.97 1.66
C1KP97 1JN9-12Z C1AV89 C1KP98 1JN9-16-12Z C1KP91 1JN9-08-16Z C1AV96 2024-16-8S C1BG83 2501-10-16 C1KP96 1JN9-12-16Z C1AV92 C1AV94 2024-16-12S 2024-16-16S 2024-16-20S 0.75 1.0 1.25 C1KQ11 1JN9-16Z C1AV95 0.50 0.63
1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2
0.90 0.50 0.67 0.68 1.55 1.20 1.19 0.75
1-1/16-12 1.97 1.93 1-1/16-12 1.97 1.76 1-5/16-12 1.97 1.93 1-5/16-12 1.97 1.81 1-5/8-12 2.13 2.06
C1BG84 2501-12-20 C1KP99 1JN9-16-20Z C1AW13 2024-20-16S C1AW14 2024-20-20S
0.75 1-1/4-11-1/2 1-1/16-12 2.38 1.95 1-1/4-11-1/2 1-5/16-12 2.38 2.13 1.0 1-1/4-11-1/2 1-5/16-12 2.38 2.09 1-5/8-12 2.38 2.06 1.25 1-1/4-11-1/2
968
Adapters
Catalog Part No. Tube O.D. Aeroquip Model (in) A (in) B (in) Price Each
Thread P 1-1/4-11-1/2 1-1/4-11-1/2
Thread T 1-5/8-12 1-7/8-12 1-7/8-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12 2-1/2-12
Wt.
C1KQ13 1JN9-20Z C1KQ14 1JN9-24-20Z C1AW15 2024-20-24S C1BG88 2501-16-24 C1AW16 2024-24-20S C1KQ12 1JN9-20-24Z C1KQ15 1JN9-24Z C1AW17 2024-24-24S 2024 Male Pipe / Male 37 Flare 90 Elbow C1KQ16 1JN9-32Z
2.15 2.19 2.48 2.46 2.50 2.33 2.64 2.30 2.48 2.34 2.48 2.46 2.06 0.50 1.87
1.50 1-1/4-11-1/2 1.25 1-1/2-11-1/2 1-1/2-11-1/2 1-1/2-11-1/2 1.50 1-1/2-11-1/2 2-11-1/2 2-11-1/2
1.50 1-1/2-11-1/2 1-5/16-12 2.64 2.14
2.64 2.33 2.66 2.97 3.00 3.08
1.87 3.84
C1AW19 2024-32-32S 2 Note: 2501 is Brennan model. Note: 1JN9 is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 1JN9-04-02LZ 1.00
Catalog Part No. C1KP79
Thread P 1/8-27 1-11-1/2
Thread T 7/16-20
A (in)
B (in)
Wt. 1.29
Price Each
1.18 0.96
C1ZY96 202411-16-16S
1-5/16-12 3.01 1.81
Note: 1JN9 is Eaton-Winner model.
Fluid Conveying
202411 Male Pipe / Male 37 Flare 90 Elbow (Long)

Tube O.D. Aeroquip Model (in) 0.38 0.38 0.50 0.75
Catalog Part No.
Thread P 1/4-18 3/8-18 1/2-14 3/4-14
Thread T 9/16-18 9/16-18 3/4-16
A (in)
B (in)
Wt. 0.10 0.40 0.50 0.83
Price Each
C1AW43 202413-4-6S C1AW44 202413-6-6S C1AW45 202413-8-8S C1AW42 202413-12-12S
2.07 1.06 2.46 1.06 3.01 1.25
1-1/16-12 3.34 1.66
202413 Male Pipe / Male 37 Flare 90 Elbow (Longer)

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 Thread P 1/8-27 Thread T 7/16-20 A (in) B (in) Wt. 0.06 Price Each
C1BD49 2250-2-4S
0.76 0.66
2250 Male Pipe / Female 37 Flare Swivel 90 Elbow
969
Adapters

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.31 0.38 0.38 0.50 0.38 0.50 0.63 0.75 A (in) B (in) Price Each
Thread P 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 1-11-1/2
Thread T 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 9/16-18 3/4-16 7/8-14
Wt. 0.12 0.12 0.14 0.17 0.27 0.31 0.28 0.31 0.58 0.74
C1DY64 6501-04-04 C1DY65 6501-04-05 C1BD50 2250-4-6S C1BD51 C1BD52 2250-6-6S 2250-6-8S
1.11 1.11 1.09 1.11 1.06 0.70 1.22 0.77 1.22 0.98 1.37 1.47 1.01 1.47 0.98
C1DY66 6501-08-06
2250 Male Pipe / Female 37 Flare Swivel 90 Elbow
C1BD54 2250-8-8S C1BD53 2250-8-10S C1BD47 2250-12-12S
1-1/16-12 1.50 1.01 1-5/16-12 1.95 1.27
C1BD48 2250-16-16S 1.0 Note: 6501 is Brennan model. Tube O.D. Aeroquip Model (in) 0.38 0.50
Catalog Part No.
Thread P 1/4-18 3/8-18
Thread T 9/16-18 3/4-16
A (in)
B (in)
Wt. 0.19 0.30
Price Each
C1BD45 2249-4-6S C1BD46 2249-6-8S
1.58 1.06 1.66 1.25
Fluid Conveying
2249 Male Pipe Swivel / Male 37 Flare 90 Elbow

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.25 0.31 0.38 0.50 0.38 0.50 0.50 0.63 0.75 0.50 0.75 1.0 1.0 A (in) B (in) Price Each
Thread P 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2
Thread T 7/16-20 7/16-20 1/2-20 9/16-18 3/4-16 9/16-18 3/4-16 3/4-16 3/4-16 7/8-14 3/4-16
Wt. 0.07 0.15 0.16 0.15 0.20 0.22 0.10 0.38 0.41 0.01 0.74 0.61 0.85 1.15 1.65 3.46
C1AW49 2025-2-4S C1AW50 2025-4-4S C1AW51 2025-4-5S C1AW52 2025-4-6S C1DV55 2025-4-8S C1AW54 2025-6-6S C1AW55 2025-6-8S C1AW58 2025-8-8S C1AW56 2025-8-10S C1DV56 2025-8-12S C1DW25 2502-08-12 C1AW47 2025-12-12S C1DW30 2502-16-12 C1AW48 2025-16-16S C1DV53 2025-20-20S C1DV54 2025-24-24S
0.66 0.90 0.88 0.98 0.88 1.01 0.88 1.09 1.22 1.25 1.02 1.11 1.02 1.42 1.23 1.56 1.23 1.52 1.23 1.64 1.36 1.65
2025 C1KS27 5JN9-08Z Female Pipe / Male 37 Flare 90 Elbow
1-1/16-12 1.35 1.89 1-1/16-12 1.36 1.83 1-5/16-12 1.39 2.17 1-5/16-12 1.62 2.17 1-7/8-12 2.08 2.89
1.25 1-1/4-11-1/2 1-5/16-12 1.70 2.33 1.50 1-1/2-11-1/2
Note: 2502 is Brennan model. Note: 5JN9 is Eaton-Winner model.
970
Adapters
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.19 0.25 0.38 0.25 0.38 0.38 0.50 0.50 0.63 0.75 0.75 0.88 1.00 1.00 A B C Thread T (in) (in) (in) 3/8-24 0.72 0.83 0.83 7/16-20 0.78 0.89 0.89 9/16-28 0.90 1.06 1.06 7/16-20 1.09 1.05 1.05 9/16-18 1.09 1.06 1.06 9/16-18 1.22 1.14 1.14 3/4-16 3/4-16 3/4-16 7/8-14 1.22 1.25 1.25 1.47 1.33 1.33 1.44 1.37 1.37 1.47 1.45 1.45 0.36 0.59 0.57 0.77 1.01 0.88 2.19 Price Each
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2
Wt. 0.05 0.06 0.13 0.11 0.12 0.19 0.28
C1ZU11 2605-03-02-03 C1AX38 2028-2-4S C1DW63 2605-06-02-06 C1AX39 2028-4-4S C1AX40 2028-4-6S C1AX41 2028-6-6S
2028 Male Pipe / Male 37 Flare / Male 37 C1AX44 2028-8-8S C1KT34 AJJN-08Z Flare Tee
C1KT35 AJJN-12Z
C1AX42 2028-6-8S
0.32
C1AX43 2028-8-10S C1DW67 2605-12-08-12 C1AX36 2028-12-12S C1DW68 2605-14-12-14 C1DW69 2605-16-12-16 C1KT36 AJJN-16Z C1AX37 2028-16-16S C1DV57 2028-20-20S
1-1/16-12 1.59 1.66 1.66 1-1/16-12 1.73 1.74 1.74 1-1/16-12 1.59 1.66 1.66 1-3/16-12 1.69 1.73 1.73 1-5/16-12 1.78 1.81 1.81 1-5/16-12 1.97 1.93 1.93 1-5/16-12 1.97 1.81 1.81
1.25 1-1/4-11-1/2 1-5/8-12 2.38 2.19 2.06
Note: 2605 is Brennan model. Note: AJJN is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 0.25 0.31 0.38 0.25 0.31 0.38 0.38 0.63 0.50 0.63 0.75 0.50 0.63 0.75 0.88 1.0
Fluid Conveying
Catalog Part No.
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2
Thread T 7/16-20 1/2-20 9/16-18 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 7/8-14 3/4-16 3/4-16 7/8-14 3/4-16 7/8-14
A (in)
B (in)
Wt. 0.08 0.10 0.13
Price Each
C1AX49 2030-2-4S C1DW47 2601-05-05-02 C1DW49 2601-06-06-02 C1KT41 AJNJ-04Z C1AX50 2030-4-4S C1DW48 2601-05-05-04 C1AX51 2030-4-6S 2030 Male Pipe / Male 37 Flare / Male 37 C1AX52 2030-6-6S C1DW54 2601-10-10-06 Flare Tee C1KT42 AJNJ-08Z C1AX54 2030-8-8S C1EM92 2030-8-10S C1DW57 2601-12-12-08 C1DW53 2601-08-08-12 C1DW56 2601-10-10-12 C1AX47 2030-12-12S C1DW59 2601-14-14-12 C1AX48 2030-16-16S
0.78 0.89 0.78 0.95 0.83 1.06 1.00 1.05 1.09 1.05 1.09 1.05 1.09 1.06 1.22 1.06 1.29 1.45 1.47 1.37 1.47 1.33 1.47 1.45 1.59 1.42 1.59 1.55
0.11 0.12 0.12 0.19 0.39 0.32 0.36 0.61 0.50 0.54 0.58 0.81 1.10
1-1/16-12 1.59 1.66
1-1/16-12 1.59 1.66 1-3/16-12 1.69 1.80 1-5/16-12 1.97 1.81
Note: 2601 is Brennan model. Note: AJNJ is Eaton-Winner model.
971
Adapters

Catalog Part No. Brennan Model Tube O.D. (in) 0.63 Thread B1 7/8-14 Thread B3 7/8-14 Thread L A2 (in) M (in) Price Each
Wt.
C1FV66 2606-10-08-10
1/2-14 1.23 1.64 0.58
2606 Male JIC 37 Flare / Male JIC 37 Flare / Female Pipe Tee
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.25 0.38 0.50 0.75
Thread P 1/4-18 1/4-18 3/8-18 3/4-14
Thread T 7/16-20 9/16-18 3/4-16 1-5/8-12
A (in)
B (in)
Wt. 0.16 0.18 0.29 0.90 2.01
Price Each
C1AX69 2031-4-4S C1AX70 2031-4-6S C1AX71 2031-6-8S C1AX68 2031-12-12S C1HN68 2602-20-20-20FG
0.88 0.98 0.88 1.09 1.02 1.26 2.33
1-1/16-12 1.36 1.83
1.25 1-1/4-11-1/2
Note: 2602-*-FG is forged Brennan model.
Fluid Conveying
2031 Female Pipe / Male 37 Flare / Male 37 Flare Tee

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.31 0.38 0.50 0.63 0.75 1.50 Thread T 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-7/8-12 A (in) B (in) Wt. 0.02 0.02 0.03 0.04 0.42 0.09 0.14 Price Each
C1BB83 210212-4S C1JC36 210212-5S C1BB84 210212-6S C1BB85 210212-8S C1BB80 210212-10S C1BB81 210212-12S C1ZU47 0306-24 Note: 0306 is Brennan model.
0.25 0.69 0.25 0.75 0.27 0.81 0.31 1.0 0.36 1.12 0.41 1.38 0.42 2.13
210212 Bulkhead Lock Nut
972
Adapters
Steel Pipe to Straight Thread O-Ring
Catalog Part No. Aeroquip Model Thread P 1/8-27 1/4-18 1/4-18 1/2-20 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 Thread T 7/16-20 7/16-20 9/16-18 7/16-20 7/16-20 9/16-18 3/4-16 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 A (in) 1.09 1.32 1.36 1.39 1.13 1.39 1.45 1.42 1.70 1.78 1.92 1.91 2.34 Wt. 0.07 0.20 0.19 0.10 0.40 0.25 0.15 0.13 0.35 0.22 0.31 0.45 0.98 Price Each
C1BD36 2246-2-4S C1BX30 6404-04-04 C1BD38 2246-4-6S C1BX32 6404-05-04
2246 Male Pipe / Female SAE O-Ring Boss C1BX34 6404-06-06

C1BX31 6404-04-06 C1BD39 2246-6-8S C1BX35 6404-06-08 C1BX36 C1BD40 C1BD34 6404-08-08 2246-8-10S 2246-12-12S
C1BD35 2246-16-16S C1BX38 6404-20-20 Note: 6404 is Brennan model. Catalog Part No.
Aeroquip Model
Thread P 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-1/4-11-1/2
Thread T 7/16-20 9/16-18 3/4-16 9/16-18 3/4-16 9/16-18 3/4-16 7/8-14 7/8-14 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12
A (in) 1.05 1.14 1.22 1.14 1.19 1.23 1.23 1.30 1.55 1.58 1.71 1.59 1.71
Wt. 0.07 0.09 0.13 0.10 0.14 0.17 0.16 0.20 0.35 0.34 0.48 0.50 0.97
Price Each
C1AZ74 2066-4-4S C1AZ75 2066-4-6S C1DZ56 6900-08-04-O C1AZ76 2066-6-6S C1AZ77 2066-6-8S 2066 Female Pipe Swivel / Male SAE O-Ring C1DZ55 6900-06-08-O C1AZ79 2066-8-8S Boss C1AZ78 C1AZ72 2066-8-10S 2066-12-12S C1AZ71 2066-12-10S C1DZ61 6900-16-12-O C1AZ73 2066-16-16S C1DZ63 6900-20-20-O
Note: 6900 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Catalog Part No. C1BC76 C1BX41 C1BC79 A (in) 0.92 0.94 1.16 1.20 1.24 1.24 1.16 0.81 1.21 1.16 1.25 1.55 1.34 1.40 1.65 1.57 0.13 0.11 0.20 0.09 0.12 0.28 1.25 0.25 0.22 Price Each
Aeroquip Model 2216-2-4S 6405-04-04-O 2216-4-5S
Thread P 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14
Thread T 7/16-20 1/2-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/8-14 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 9/16-18 3/4-16 3/4-16
Wt. 0.04 0.15 0.09 0.09 0.09
C1BX43 6405-05-02-O
2216 C1KS63 5ON-06-04Z Female Pipe / Male SAE O-Ring Boss
C1BC80 2216-4-6S
C1BX48 6405-08-04-O C1DY29 6405-10-04-O C1BX42 6405-04-06-O C1BX45 6405-06-06-O C1BC81 2216-6-8S C1BX50 6405-10-06-O C1HQ94 2216-6-12S C1BX46 6405-06-08-O C1BC84 2216-8-8S C1KS64 5ON-08Z
973
Adapters

Catalog Part No. C1BC82 C1BC83 Aeroquip Model 2216-8-10S 2216-8-12S Thread P 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 Thread T 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-7/8-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-5/8-12 A (in) 1.54 1.63 1.72 1.65 1.61 1.79 1.67 1.00 1.69 1.19 1.91 1.91 2.02 1.00 1.00 2.27 2.00 2.10 2.12 2.28 1.11 1.48 0.12 0.34 0.75 1.03 0.87 0.61 0.55 0.56 0.33 0.23 0.52 0.37 Wt. 0.25 Price Each
C1KS65 5ON-10-08Z C1KS66 5ON-12-08Z
2216 C1KS67 5ON-12Z Female Pipe / Male SAE O-Ring Boss C1BC72 2216-12-12S
C1BC73 2216-12-16S C1KS68 5ON-16-12Z
C1BX57 6405-16-08-O
C1BX59 6405-20-12-O C1BX53 6405-12-16-O C1BC74 2216-16-16S C1KS69 5ON-16Z C1BC75 2216-16-20S C1BX62 6405-24-16-O C1BX58 6405-16-20-O C1BC77 2216-20-20S C1KS70 5ON-20Z C1BX63 6405-24-20-O C1BX61 6405-20-24-O
Fluid Conveying
C1BC78 2216-24-24S 1-1/2-11-1/2 1-7/8-12 2.00 Note: 6405 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 5ON is Eaton-Winner model. Catalog Part No.
Brennan Model
Thread B1 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/8-12
Thread B2 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/2-14 1/4-18 3/8-18 1/2-14 3/4-14 3/8-18 1/2-14 3/4-14 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2
L (in) Wt. 1.07 1.23 1.11 1.29 1.30 1.39 1.24 1.36 1.55 1.59 1.56 1.69 1.77 1.68 1.84 1.73 1.90 2.17 0.04 0.07 0.07 0.07 0.09 0.14 0.10 0.12 0.13 0.20 0.17 0.05 0.24 0.26 0.28 0.30 0.01 0.05
Price Each
C1EK71 6401-04-02-O C1DX99 6401-04-04-O
C1EK73 6401-06-02-O C1DY14 6401-06-04-O
6401 Male SAE O-Ring Boss / Male Pipe
C1EK74
6401-06-06-O
C1EK75 6401-06-08-O C1EK76 6401-08-04-O C1EK28 C1EK77 6401-08-06-O 6401-08-08-O
C1EK78 6401-08-12-O C1EN69 6401-10-06-O C1BX28 6401-10-08-O C1EK79 6401-10-12-O C1EK80 6401-12-06-O C1EK81 6401-12-08-O C1EK82 6401-12-12-O C1EK84 6401-16-16-O C1BX29 6401-20-20-O
974
Adapters
Catalog Part No. Aeroquip Model Thread P 1/2-14 3/4-14 1-11-1/2 Thread T 3/4-16 1-1/16-12 1-5/16-12 A (in) B (in) Wt. 0.25 0.62 0.92 Price Each
C1AZ84 2067-8-8S C1AZ80 2067-12-12S C1AZ81 2067-16-16S
0.69 1.30 0.97 1.73 1.26 1.89
Note: 6902 is Brennan model. SAE O-Ring Boss O-Rings page 1099
2067 Female Pipe Swivel / Male SAE O-Ring Boss 45 Elbow

Catalog Part No. A (in) B (in) Price Each
Aeroquip Model
Thread P 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2
Thread T 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-5/16-12
Wt. 0.10 0.15 0.22 0.27 0.33 0.36 0.78 0.46 0.70 0.91
C1AZ88 2068-4-4S C1AZ89 2068-4-6S C1AZ90 2068-6-6S C1AZ91 C1AZ93 C1AZ92 2068-6-8S 2068-8-8S 2068-8-10S C1KR61 2OU9-08OGZ
0.68 1.05 0.73 1.25 0.83 1.25 0.91 1.45 1.46 0.91 1.45 0.97 1.70 1.92 1.09 1.70 1.15 1.94 1.44 2.05
2068 Female Pipe Swivel / Male SAE O-Ring C1DZ70 6901-12-08-NWO C1DV72 2068-12-10S Boss 90 Elbow
C1AZ85 C1AZ87 2068-12-12S 2068-16-16S
Fluid Conveying
Note: 6901 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 2OU9 is Eaton-Winner model. Catalog Part No. A (in) B (in) Price Each
Aeroquip Model
Thread P 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-1/4-11-1/2
Thread T 1/2-20 7/16-20 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/8-12
Wt. 0.11 0.17 0.18 0.29 0.44 0.54 0.64 0.75 1.33 2.22
C1DZ11 6805-05-02-NWO C1DY99 6805-04-04-NWO C1DZ12 6805-06-04-NWO C1AZ95 206801-6-8S C1DV73 206801-8-8S C1DZ15 6805-10-08-NWO C1DZ16 6805-12-08-NWO
0.66 1.13 0.87 1.16 0.88 1.31 1.02 1.46 1.23 1.73 1.23 1.80 1.24 1.94 1.36 2.17 1.36 2.04 1.62 2.41 1.70 2.38
206801 Female Pipe / Male SAE O-Ring Boss C1AZ94 206801-12-12S C1JC33 206801-16-16S 90 Elbow
C1DZ20 6805-20-20-NWO
C1KS71 5ON9-12OGZ
Note: 6805 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 5ON9 is Eaton-Winner model.
975
Adapters

Catalog Part No. Tube O.D. N (in) Thread B1 Thread A2 L (in) (in) 0.25 0.38 0.38 0.50 0.50 0.63 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1.09 1.09 1.25 1.09 1.35 1.22 1.45 1.22 1.52 1.47 1.70 1.47 Price Each
Brennan Model
Wt. 0.13 0.14 0.01 0.26 0.36 0.36
C1DZ22 6806-04-04-NWO C1DZ24 6806-06-04-NWO C1DZ25 6806-06-06-NWO C1DZ26 6806-08-06-NWO C1DZ27 6806-08-08-NWO C1DZ28 6806-10-08-NWO
6806-NWO C1DZ29 6806-12-12-NWO 0.75 1-1/16-12 3/4-14 1.94 1.59 0.60 Male SAE O-Ring Boss / Male Pipe 90 C1DZ32 6806-20-20-NWO 1.25 1-5/8-12 1-1/4-11-1/2 2.25 2.38 1.79 Elbow
Fluid Conveying
976
Adapters
Steel Pipe to Hose
Catalog Part No. Hose I.D. (in) 5/8 N L (in) (in) 1.50 1.08 Price Each
Brennan Model
Thread A2 1/2-14
Wt. 0.16
C1HW95 4404-10-08
4404 Hose Barb / Male Pipe

Hose I.D. (in) 1
Catalog Part No.
Brennan Model
Thread A2 3/4-14
N L (in) (in) 1.20 1.75
Wt. 0.31
Price Each
C1EK18 4503-16-12
4503 Hose Barb / Male Pipe 45 Elbow

Hose I.D. (in) 0.38 0.38 0.50 0.63 0.75 0.50 0.63 0.75 0.63 0.75 1.0 0.75 1.0 1.0 1.25 1.50 1.50
Catalog Part No.
Brennan Model
Thread P 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
A (in)
B (in)
C (in)
Wt. 0.07 0.18 0.19 0.18 0.18 0.28 0.30 0.26 0.42 0.47 0.42 0.72 0.83 1.42 1.38 1.30 1.47
Price Each
C1EC66 FF1162-0406S C1DX28 4501-06-06 C1DX30 4501-08-06 C1DX32 4501-10-06 C1DX35 4501-12-06 C1EF61 4501-08-08 C1DX33 4501-10-08
0.96 1.54 0.38 1.22 1.89 0.38 1.22 1.91 0.50 1.28 1.97 0.63 1.22 1.90 0.75 1.47 1.98 0.50 1.47 1.97 0.63 1.97 1.47 0.75 1.60 2.06 0.63 1.50 2.06 0.75 1.60 2.08 1.95 2.19 2.38 2.38 1.0 1.0 1.0 1.98 2.19 0.75
Fluid Conveying
4501 Male Pipe / Hose Barb 90 Elbow
C1DX36 4501-12-08 C1DX34 4501-10-12 C1CU61 FF1162-1212S C1DX39 4501-16-12 C1DX38 4501-12-16 C1CU62 FF1162-1616S C1DX40 4501-16-20 C1DX41 4501-20-20 C1DX43 4501-24-20 C1KB13 4501-24-24-FG
2.38 2.38 1.25 2.38 2.38 1.50 2.64 2.50 1.50
Note: FF1162 is Aeroquip model.
977
Adapters
Steel 37 Flare Union

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.19 0.25 A (in) 1.23 1.37 1.38 1.37 1.37 1.40 1.41 1.40 1.41 1.42 1.52 1.51 1.52 1.62 1.61 1.67 1.68 1.78 1.88 1.89 1.85 1.87 1.95 2.05 2.17 2.16 2.18 2.20 2.25 2.24 0.61 2.44 2.43 2.75 2.76 3.41 3.40 2.10 0.66 0.97 0.29 0.15 0.38 0.41 0.24 0.24 0.24 0.26 0.25 0.14 0.16 0.18 0.09 0.09 0.12 0.05 0.06 0.04 0.05 0.05 Price Each
Thread T1 3/8-24 7/16-20 7/16-20 1/2-20
Thread T2 3/8-24 7/16-20 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 1/2-20 9/16-18 9/16-18 3/4-16 7/16-20 9/16-18 3/4-16 3/4-16 7/16-20 9/16-18 3/4-16 7/8-14 7/8-14 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12 2-1/2-12
Wt. 0.02 0.04
C1AW70 2027-3-3S C1AW72 2027-4-4S C1KP17 1J-04Z C1AW73 2027-5-4S C1AW74 2027-5-5S C1AW75 2027-6-4S C1KP16 1J-04-06Z C1AW76 2027-6-5S C1AW77 2027-6-6S C1KP19 1J-06Z C1KP18 1J-06-08Z C1AW78 2027-8-4S C1AW79 2027-8-6S C1AW80 2027-8-8S C1KP21 1J-08Z C1BF52 2403-10-04 C1AW60 2027-10-6S C1AW61 2027-10-8S C1AW59 2027-10-10S
2027 Male 37 Flare / Male 37 Flare
0.31
1/2-20 7/16-20 7/16-20 9/16-18
0.38
9/16-18 9/16-18 9/16-18 3/4-16
0.38 0.50
3/4-16 3/4-16 3/4-16 7/8-14
0.38 0.50 0.63
7/8-14 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12
Fluid Conveying
C1KP22 1J-10Z C1BF53 2403-12-04 C1BF54 2403-12-06 C1AW64 2027-12-8S C1AW62 2027-12-10S C1KP23 1J-12Z C1AW63 2027-12-12S C1BF55 2403-14-12 0.75 0.75 1.0 0.38 0.61
1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12
C1AW66 2027-16-12S C1AW67 2027-16-16S C1KP24 1J-16Z C1HZ19 2027-20-16S C1KP25 1J-20Z C1AW68 2027-20-20S C1AW69 2027-24-24S C1KP26 1J-24Z C1KP27 1J-32Z C1AW71 2027-32-32S
1.25 1.50
1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12
2-1/2-12
Note: 2403 is Brennan model. Note: 1J is Eaton-Winner model
978
Adapters
Catalog Part No. C1AY43 Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 2041-4-4S 0.25 0.31 0.38 0.38 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 3/4-16 0.50 0.63 0.75 1.0 1.25 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 A (in) B (in) Price Each
Wt. 0.09 0.10 0.14 0.14
2.07 1.20 2.07 1.28 2.07 1.20 2.18 1.28 2.18 1.28 2.15 1.28 2.42 1.44 2.44 1.44 2.74 1.57 2.74 1.58 3.09 1.75 3.09 1.75 3.14 1.75 3.14 1.75 3.34 1.80 3.31 1.80
C1KS73 6J-04LNZ C1AY44 2041-5-5S 2700-LN-06-06-F C1HW45 G
2041 Male 37 Flare / Male 37 Flare Bulkhead
C1AY45
2041-6-6S
C1KS74 6J-06LNZ C1KS75 6J-08LNZ C1AY46 C1AY39 C1AY40 C1AY41 2041-8-8S 2041-10-10S 2041-12-12S 2041-16-16S C1KS76 6J-10LNZ C1KS77 6J-12LNZ C1KS78 6J-16LNZ C1KS79 6J-20LNZ C1AY42 2041-20-20S
0.25 0.33 0.58 0.74 1.12
Note: 2700 is Brennan model which does NOT come with locknut. 2700-LN-*-FG is a forged Brennan model with a locknut included. Bulkhead Locknuts (Steel) page 972 Note: 6J is Eaton-Winner model.
Fluid Conveying
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.25 0.38 0.25 0.38 0.50 0.5 0.63 0.50 0.25 0.50 0.75 0.25 0.63
Thread T1 7/16-20 7/16-20 1/2-20 1/2-20 9/16-18 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12
Thread T2 3/8-24 9/16-18 7/16-20 9/16-18 3/4-16 9/16-18 7/8-14 1-1/16-12 7/16-20 3/4-16 3/4-16 1-1/16-12 1-1/16-12 7/16-20 7/8-14
A (in) 1.05 1.01 1.16 1.17 1.28 1.31 1.29 1.62 1.47 1.53 1.44 1.74 1.71 1.50 1.73
Wt. 0.04 0.05 0.05 0.07 0.10 0.10 0.13 0.26 0.13 0.13 0.26 0.20 0.26
Price Each
C1HK94 2406-04-03 C1EX63 2406-04-06 C1DV86 2406-05-04 C1FA61 2406-05-06 2406-08-06
2215 Female 37 Flare / Male 37 Flare
C1ZX93 2406-06-08 C1KJ61 C1FE70 2406-08-10 C1ZU16 2406-0812 C1DV87 2406-10-04 C1BC55 C1BC54 2215-10-8S 2215-10-12S C1KR12 2J-08-10Z C1KR14 2J-12-10Z C1EF56 2406-12-04 C1BC56 2215-12-10S
979
Adapters

Catalog Part No. Tube O.D. Aeroquip Model (in) A (in) 1.65 1.83 2.00 1.80 2.30 1.97 2.00 2.16 2.55 0.71 0.99 0.88 0.44 0.32 0.76 Price Each
Thread T1 1-1/16-12 1-1/16-12
Thread T2 7/8-14 1-5/16-12 1-5/16-12 1-1/16-12 1-5/8-12 1-5/8-12 1-1/16-12 1-7/8-12 1-5/8-12
Wt.
C1KR13 2J-10-12Z C1KR15 2J-16-12Z C1BC57 2215-12-16S C1DV92 2406-14-12 1.0 0.75 1.25 0.75 1.25 1.25
1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12
C1BC58
2215-16-20S
C1KR16 2J-20-16Z C1DV94 2406-20-12 C1FD28 2406-20-24 C1BC59 2215-24-20S
C1KR17 2J-20-24Z 1-7/8-12 1-5/8-12 2.19 Note: 2406 are Brennan models, except 2406-5-4 is a Tompkins model. Note: 2J is Eaton-Winner model. Male Tube O.D. Aeroquip Model (in) 0.25 0.25 0.38 0.25 0.38 0.50 0.38 0.63 0.38 0.50 0.38 0.50 0.63 0.75 221501-6-4S
Catalog Part No. C1BC69
Thread T1 7/16-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12
Thread T2 7/16-20 7/16-20 7/16-20 9/16-18 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 9/16-18 7/8-14 9/16-18 9/16-18 3/4-16 3/4-16 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12
A (in) 1.44 0.97 0.97 1.59 1.00 1.00 1.00 1.00 1.75 1.03 2.17 1.09 1.09 1.19 1.19 1.22 1.16 1.26 1.26 1.38 1.36 1.47 1.47 1.59 1.52
Wt. 0.05 0.06 0.08 0.10 0.11 0.15 0.15 0.22 0.23 0.28 0.36 0.35 0.37 0.41
Price Each
C1FT76 6504-0404 C1KR97 5J-04-06SZ
Fluid Conveying
C1FT77 6504-0606 C1BC70 221501-8-4S 221501-8-6S C1KR98 5J-04-08SZ
221501 Female 37 Flare Swivel / Male 37 Flare
C1BC71
C1KR99 5J-06-08SZ C1FT78 6504-0808 C1BC61 221501-10-6S C1FT79 6504-1010
C1KS11 5J-06-12SZ C1BC62 C1BC63 221501-12-6S 221501-12-8S C1KS13 5J-08-12SZ C1KS12 5J-06-16SZ C1BC66 221501-16-6S C1KS14 5J-08-16SZ C1BC67 221501-16-8S C1KS15 5J-10-16SZ C1BC64 221501-16-10S C1BC65 221501-16-12S
C1KS16 5J-12-16SZ C1KS17 5J-16-20SZ C1BC68 221501-20-16S 1.0 Note: 6504 is Brennan model. Note: 5J is Eaton-Winner model.
1-5/8-12
0.79
980
Adapters
Catalog Part No. C1ZW99 C1ZW98 Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75 1.00 Length (in) Price Each
Adaptall Model 9026-04-04 9026-06-06 9026-08-08 9026-10-10 9026-12-12 9026-16-16
Thread T1 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
Thread T2 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12
Wt. 0.05 0.09 0.15 0.21 0.37 0.52
9026 Female 37 Flare Swivel Union
C1ZW97 C1FE87 C1FE88 C1FX62
Catalog Part No.
Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.25 0.25 0.31 0.38 0.50 0.63 0.75 1.00 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/16-12 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/16-12 2702-LN-04-04-F G
A (in)
B (in)
Wt. 0.10 0.09 0.10 0.13 0.26 0.34 0.71 1.20
Price Each
C1AY48 2042-4-4S C1HD57
1.55 0.73 1.53 0.72 1.66 0.77 1.67 0.91 1.64 0.83 1.94 1.06 2.08 0.98 2.17 1.11 2.36 1.41 2.56 1.49 2.58 1.47
C1DW76 2702-05-05 C1KS80 6J4-06LNZ C1AY49 2042-6-6S
2042 Male 37 Flare / Male 37 Flare 45 Bulkhead Elbow
C1KS81 6J4-08LNZ C1AY50 2042-8-8S C1DW77 2702-10-10 C1AY47 2042-12-12S C1KS82 6J4-16LNZ C1HH77 2042-16-16S
Fluid Conveying
Note: 2702 is Brennan model which does NOT come with locknut. 2702-LN is Brennan model with locknut. 2702-*-FG is forged Brennan model. Bulkhead Locknuts (Steel) page 972 Note: 6J4 is Eaton-Winner model. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 7/16-20 0.25 0.38 0.50 0.63 0.75 1.0 1.25 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 2070-4-4S 2070-6-6S 2070-8-8S 2070-10-10S 2070-12-12S 2070-16-16S
Catalog Part No. C1BA11 C1BA13
A (in)
B (in) 0.85
Wt. 0.06 0.10 0.20 0.25
Price Each
C1KR18 2J4-04Z C1KR19 2J4-06Z C1KR20 2J4-08Z
0.50 0.80 0.90 0.61 0.83 1.06 0.82 0.98 1.22 0.75 1.11 1.40 0.71 1.50 1.52 0.94 1.47 1.69
2070 Female 37 Flare Swivel / Male 37 Flare 45 Elbow
C1BA14 C1AZ96 C1AZ97 C1AZ98
C1KR21 2J4-10Z C1KR22 2J4-12Z C1KR23 2J4-16Z C1KR24 2J4-20Z C1AZ99 2070-20-20S
0.42 0.62 1.31
Note: 6502 is Brennan model. 6502-*-FG is forged Brennan model. Note: 2J4 is Eaton-Winner model.
981
Adapters

Catalog Part No. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.19 0.25 0.38 3/8-24 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 0.50 0.63 0.75 1.0 1.25 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 3/8-24 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 A (in) B (in) Price Each
Wt. 0.04 0.05 0.16 0.16 0.20 0.28 0.48 0.66 1.22
C1DW11 2500-03-03 C1KP28 1J9-04Z C1AY18 2039-4-4S C1KP29 1J9-06Z C1AY19 2039-6-6S C1DV62 2039-8-6S C1KP30 1J9-08Z C1AY20 C1AY15 C1AY16 2039-8-8S 2039-10-10S 2039-12-12S
0.83 0.83 0.96 0.96 0.89 0.89 1.06 1.06 1.06 1.06 1.25 1.14 1.26 1.26 1.25 1.25 1.45 1.45 1.66 1.66 1.93 1.93 1.81 1.81 2.06 2.06
2039 Male 37 Flare / Male 37 Flare 90 Elbow
C1KP31 1J9-16Z C1AY17 2039-16-16S C1DV61 2039-20-20S
Note: 2500 is Brennan model. Note: 1J9 is Eaton-Winner model. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.19 0.25 0.25 3/8-24 7/16-20 7/16-20 9/16-18 0.38 0.50 0.63 0.75 1.0 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 3/8-24 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12
Catalog Part No.
A (in)
B (in)
Wt. 0.07 0.11 0.10
Price Each
Fluid Conveying
C1DW74 2701-03-03 C1AY54 2043-4-4S C1HD55 2701-LN-04-04-F G 2043-6-6S
1.50 0.94 1.59 0.92 1.59 0.97 1.81 1.09 1.81 1.06 2.11 1.36 2.11 1.24 2.39 1.46 2.67 1.78 2.67 1.72 2.80 1.94
C1KS83 6J9-06LNZ C1AY55 C1KS84 6J9-08LNZ
0.19 0.32 0.47 0.87 1.02
2043 Male 37 Flare / Male 37 Flare Bulkhead
C1AY56 2043-8-8S C1AY51 2043-10-10S C1KS85 6J9-12LNZ C1AY52 2043-12-12S C1AY53 2043-16-16S
Note: 2701 is Brennan model which does NOT come with locknut. 2701-LN is Brennan model with locknut. 2701-*-FG is forged Brennan model. Bulkhead Locknuts (Steel) page 972 Note: 6J9 is Eaton-Winner model.
Catalog Part No. C1FL30 C1BA21
Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 6500-03-03 2071-4-4S 0.18 0.25 0.31 3/8-24 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 0.38 9/16-18 9/16-18 3/4-16 3/4-16 0.50 3/4-16 3/8-24 7/16-20 9/16-18 1/2-20 1/2-20 9/16-18 9/16-18 3/4-16 9/16-18 3/4-16 3/4-16
A (in)
B (in)
Wt. 0.07 0.07 0.11 0.09 0.20 0.11 0.20 0.19
Price Each
1.00 0.83 0.66 0.89 0.69 1.06 0.64 0.95 1.22 1.02 1.06 0.88 1.06 1.32 1.25 1.26 0.96 1.25
C1BA22 2071-4-6S C1BA23 2071-5-5S C1BX66 6500-05-06 C1KR26 2J9-06Z
C1BA24
2071-6-6S
C1BX68 6500-08-06 C1HZ24 2071-8-6S C1KR27 2J9-08Z C1BA25 2071-8-8S
0.21
982
Adapters
Catalog Part No. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 3/4-16 3/4-16 7/8-14 7/8-14 0.63 7/8-14 7/8-14 1-1/16-12 0.75 0.88 1.0 1.25 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 7/8-14 1-1/16-12 3/4-16 7/8-14 7/8-14 1-1/16-12 3/4-16 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 107/8-12 A (in) B (in) Price Each
Wt. 0.20 0.52 0.30 0.32 0.50 0.45
C1BX70 6500-10-08 C1BX71 6500-12-08 C1BA16 2071-10-8S C1KR28 2J9-10Z C1BA15 2071-10-10S C1BX72 6500-12-10
1.47 1.45 1.55 1.65 1.12 1.33 1.49 1.12 1.45 1.73 1.65 1.74 1.41 1.19 1.66 1.74 1.19 1.73 1.41 1.81 1.92 1.55 2.06 2.19 1.86 2.33
C1BX69 6500-08-12 C1BA17 2071-12-12S C1KR29 2J9-12Z C1BA18 2071-14-14S C1BA19 2071-16-16S C1KR30 2J9-16Z C1BA20 2071-20-20S C1KR31 2J9-20Z C1EM93 2071-24-24S 1.50 Note: 6500 is Brennan model. Note: 2J9 is Eaton-Winner model.
0.52 0.72 0.74 1.83 2.20
Catalog Part No. C1BS11 C1BS12
Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 500454-4S 500454-6S 0.25 0.38 0.50 0.63 0.75 1.0 1.25 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12
A (in)
B (in)
Wt. 0.05 0.09 0.17 0.27 0.50 0.78 1.38
Price Each
Fluid Conveying
0.68 1.12 0.85 1.31 1.09 1.66 1.23 1.82 1.82 2.49 2.39 2.79 2.75 3.14
C1BS13 500454-8S C1BR96 500454-10S C1BR97 500454-12S C1BR98 500454-16S
500454 Female 37 Flare Swivel / Male 37 Flare Bent Tube 90 (Pressures thru 4 Light Spiral)
C1BR99 500454-20S
Catalog Part No. C1CV28
Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 FF5163-0808S 0.50 0.75 1.0 1.25 1.50 3/4-16 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12 3/4-16 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12
A (in)
B (in)
Wt. 0.10 0.56 1.09
Price Each
1.87 2.16 2.35 2.81 3.04 3.41 3.4 3.71 3.95 4.33
C1CV29 FF5163-1212S C1CV30 FF5163-1616S C1CV31 FF5163-2020S C1CV32 FF5163-2424S
1.92 2.88
FF5163 Female 37 Flare Swivel / Male 37 Flare Bent Tube 90 (For pressures thru 4 Heavy Spiral)
983
Adapters

Catalog Part No. C1BS35 C1BS36 C1BS32 C1BS34 Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 504095-6S 504095-8S 504095-10S 504095-16S 0.38 0.50 0.63 0.75 1.0 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 A (in) B (in) Price Each
Wt. 0.11 0.21 0.31 0.58 0.99
2.18 1.31 2.43 1.78 2.57 2.07 3.73 2.49 4.58 2.79
C1BS33 504095-12S
504095 Female 37 Flare Swivel / Male 37 Flare Bent Tube 90 (For pressures thru 4 Light Spiral Hose)
Catalog Part No. C1AX95 Aeroquip Model 2033-4-4S Thread T1 3/8-24 7/16-20 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 7/8-14 Thread T2 3/8-24 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 Thread T3 3/8-24 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1.06 2.12 1.06 2.12 1.25 2.14 1.26 2.52 1.25 2.50 1.45 2.90 0.26 0.38 0.65 0.99 0.50 0.87 1.82 2.15 0.14 0.22 A (in) B (in) Wt. 0.15 0.07 0.13 Price Each
C1BH56 2603-03-03-03 C1KT27 AJ-04Z C1BH57 2603-06-06-04 C1KT28 AJ-06Z C1AX97 2033-6-6S C1AX98 2033-8-6-6S
0.84 1.68 0.89 1.78 0.96 1.93
Fluid Conveying
2033 Male 37 Flare Tee
C1KT29 AJ-08Z C1AX99 2033-8-8S C1AX90 2033-10-10S C1KT30 AJ-12Z C1AX91 2033-12-12S C1BH66 2603-16-16-12 C1BH64 2603-14-14-14 C1KT31 AJ-16Z C1AX92 2033-16-16S
1-1/16-12 1-1/16-12 1-1/16-12 1.74 3.48 1-1/16-12 1-1/16-12 1-1/16-12 1.66 3.32 1-1/16-12 1-5/16-12 1-5/16-12 1.82 3.58 1-3/16-12 1-3/16-12 1-3/16-12 1.73 3.46 1-5/16-12 1-5/16-12 1-5/16-12 1.93 3.86 1-5/16-12 1-5/16-12 1-5/16-12 1.81 3.62 1-5/8-12 1-7/8-12 1-5/8-12 1-7/8-12 1-5/8-12 2.06 4.38 1-7/8-12 2.33 4.66
C1AX94 2033-20-20S C1BH67 2603-24-24-24
Note: 2603 is Brennan model. Note: AJ is Eaton-Winner model.
Catalog Part No.
Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.38 0.50 0.75 9/16-18 3/4-16 3/4-16 1-1/16-12 9/16-18 3/4-16 3/4-16 1-1/16-12
A (in)
B (in)
Wt. 0.19 0.41 0.96
Price Each
C1HX45 203002-6-6S C1KT32 AJ6JJ-08LNZ C1AX56 203002-8-8S C1AX55 203002-12-12S
1.81 1.06 1.81 1.12 2.11 1.24 2.67 1.72
Note: 2703-LN-*-FG is forged Brennan model with locknut. Note: AJ6JJ is Eaton-Winner model.
203002 Male 37 Flare Bulkhead Tee
984
Adapters
Catalog Part No. Tube O.D. (in) 0.38 0.50 1.00 A (in) B (in) C (in) Price Each
Aeroquip Model
Thread T 9/16-18 9/16-18 3/4-16 1-5/16-12
Wt. 0.20 0.41 1.36
C1KT33 AJJ6J-06LNZ C1AX66 203008-6-6S C1HD60 C1HN70 2704-LN-080808FG 2704-LN-161616FG
1.81 1.06 1.06 1.81 1.09 1.09 2.11 1.36 1.36 2.81 1.94 1.94
203008 Male 37 Flare Bulkhead Tee
Note: 2704 is Brennan model. 2704-*FG is forged Brennan model. 2704-LN models include a lock nut. 2704 models without LN do not include a locknut. Bulkhead Locknuts (Steel) page 972 Note: AJJ6J is Eaton-Winner model.
Catalog Part No. C1AX77
Thread T1 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14
Thread T2 7/16-20 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14
Thread T3 7/16-20 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14
A (in)
B (in) 0.96
Wt. 0.09 0.08 0.16 0.32 0.47 0.70 0.91 1.18
Price Each
C1KT45 BJ-04Z
0.66 0.89 0.89 1.06 0.76 1.06 1.26 0.98 1.25 1.49 1.12 1.45 1.74
C1EW19 6600-04-04-04-FG 7/16-20 C1KT46 BJ-06Z C1AX78 C1AX79 203101-6-6S 203101-8-8S 203101-10-10S 203101-12-12S C1KT47 BJ-08Z
Fluid Conveying
203101 Female 37 Flare Swivel / Male 37 Flare / Male 37 Flare Tee
C1KT48 BJ-10Z C1AX73 C1AX74 C1KT49 BJ-12Z C1DY76 6600-14-14-14 C1KT50 BJ-16Z C1AX75 203101-16-16S C1AX76 203101-20-20S
1-1/16-12 1-1/16-12 1-1/16-12
1-1/16-12 1-1/16-12 1-1/16-12 1.04 1.66 1-3/16-12 1-3/16-12 1-3/16-12 1.78 1.73 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1.93 1-5/16-12 1-5/16-12 1-5/16-12 1.31 1.81 1-5/8-12 1.55 2.06
2.01
Note: 6600 is Brennan model. 6600-*-FG is forged Brennan model. Note: BJ is Eaton-Winner model.
985
Adapters

Catalog Part No. C1AX84 Tube O.D. A B C Aeroquip Model (in) Thread T1 Thread T2 (in) (in) (in) 7/16-20 0.25 0.31 0.38 0.50 0.63 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 0.96 0.96 0.66 0.89 0.89 0.68 0.95 0.95 1.06 1.06 0.88 1.06 1.06 1.26 1.26 0.96 1.25 1.25 1.49 1.49 0.99 1.46 1.45 1.74 1.74 0.67 0.94 2.00 1.93 1.93 2.19 2.19 0.46 0.32 0.14 0.09 0.12 203102-4-4S Price Each
Wt.
C1KT52 CJ-04Z C1JC24 203102-5-5S C1KT53 CJ-06Z C1AX85 C1AX86 203102-6-6S 203102-8-8S 203102-10-10S 203102-12-12S 203102-16-16S 203102-20-20S C1KT54 CJ-08Z
203102 Female 37 Flare Swivel / Male 37 Flare / Male 37 Flare Tee
C1KT55 CJ-10Z C1AX80 C1AX81 C1AX82 C1AX83 C1KT56 CJ-12Z C1KT57 CJ-16Z 1.0 1.25 C1KT58 CJ-20Z
1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-5/8-12
0.75 1-1/16-12 1-1/16-12 1.19 1.66 1.66 1-5/16-12 1-5/16-12 1.41 1.81 1.81 1-5/8-12 1.68 2.06 2.06
Note: 6602 is Brennan model. 6602-*-FG is forged Brennan model. Note: CJ is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 0.25 0.38 0.50
Fluid Conveying
Catalog Part No.
Thread T 7/16-20 9/16-18 3/4-16
A (in)
B (in)
Wt. 0.10 0.17 0.35
Price Each
C1AU70 2020-4-4S C1GH34 2020-6-6S C1AU71 2020-8-8S
0.89 0.89 1.06 1.06 1.25 1.25
2020 Male 37 Flare Cross

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.13 0.19 0.25 0.31 0.38 0.50 0.63 0.75 0.88 1.0 1.25 1.50 2 Thread T 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12 A (in) B (in) Wt. 0.01 0.01 0.02 0.03 0.04 0.07 0.09 0.16 0.24 0.24 0.50 0.63 1.02 Price Each
C1DU44 0304-C-02 C1DV75 210292-3S C1BB92 C1BB94 C1BB95 C1BB86 C1BB87 C1BB88 C1BB89 C1BB90 210292-4S 210292-6S 210292-8S 210292-10S 210292-12S 210292-16S 210292-20S 210292-24S C1BB93 210292-5S
0.50 0.38 0.56 0.44 0.59 0.56 0.61 0.62 0.62 0.69 0.75 0.88 0.84 1.0 0.91 1.25 0.97 1.38 1.02 1.50 1.06 2.0 1.19 2.25 1.44 2.88
210292 37 Flare Cap
C1DU45 0304-C-14
C1BB91 210292-32S Note: 0304-C is Brennan model.
986
Adapters
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.13 0.19 0.25 0.31 0.38 0.50 0.63 0.75 0.88 1.0 1.25 1.50 2 A (in) 0.70 0.73 0.80 0.55 0.80 0.79 0.84 0.94 0.94 1.08 1.10 1.26 1.28 1.31 1.34 1.33 1.46 1.45 1.65 1.65 2.05 2.05 2.83 0.81 0.45 0.29 3.00 0.17 0.18 0.06 0.04 Price Each
Thread T 5/16-24 3/8-24 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12 2-1/2-12
Wt. 0.02 0.02 0.03
C1DV98 2408-02 C1CB20 900599-3S C1CB21 900599-4S 900599-5S 900599-6S 900599-8S 900599-10S 900599-12S C1KR69 4J-04Z C1CB22 C1CB23 C1CB24 C1CB14 C1CB15 C1KR70 4J-06Z C1KR71 4J-08Z C1KR72 4J-10Z C1KR73 4J-12Z C1BF74 2408-14 C1KR74 4J-16Z C1CB16 C1CB17 C1CB18 900599-16S 900599-20S 900599-24S C1KR75 4J-20Z C1KR76 4J-24Z C1KR77 4J-32Z C1CB19 900599-32S
900599 Male 37 Flare Plug
1.21
Note: 2408 is Brennan model. Note: 4J is Eaton-Winner model.
987
Adapters
Steel Straight Thread O-Ring to 37 Flare

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.25 0.25 0.31 0.38 0.50 0.25 0.31 0.38 0.50 0.25 0.31 0.38 0.50 0.63 0.75 0.25 0.31 0.38 0.50 0.63 0.75 1.0 0.25 0.38 A (in) 1.13 1.17 1.22 1.23 1.24 1.27 1.27 1.49 1.23 1.23 1.27 1.52 1.29 1.29 1.36 1.30 1.30 1.46 1.44 1.71 1.86 1.37 1.30 1.37 1.38 1.38 1.48 1.48 1.64 1.63 1.94 1.94 1.89 1.49 1.48 1.50 1.49 1.57 1.60 1.67 1.70 2.00 1.88 2.07 1.65 1.66 1.57 1.76 1.76 0.32 0.26 0.38 0.26 0.30 0.19 0.18 0.15 0.35 0.20 0.27 0.16 0.12 0.10 0.12 0.11 0.16 0.45 0.12 0.06 0.25 0.15 0.14 0.05 0.04 0.25 0.06 0.03 0.14 0.05 Price Each
Thread T1 5/16-24 3/8-24 7/16-20 7/16-20 7/16-20 7/16-20 7/16-20 7/16-20 1/2-20 1/2-20 1/2-20 1/2-20 9/16-18 9/16-18 9/16-18 9/16-18 9/16-18 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 7/8-14 7/8-14
Thread T2 7/16-20 7/16-20 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/16-20 1/2-20 9/16-18 3/4-16 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16
Wt. 0.04 0.15
C1EN67 6400-04-02-O C1BX13 6400-04-03-O C1KQ20 1JO-04Z C1AX20 202702-4-4S
202702 Male SAE O-Ring Boss / Male 37 Flare C1AX21 202702-4-6S

C1KQ21 1JO-06-04Z
C1BX16 6400-05-04-O
C1AX22 202702-4-8S C1BX14 6400-04-05-O C1AX23 202702-5-5S C1AX24 C1AX26 202702-5-6S 202702-6-4S C1BX19 6400-08-05-O C1KQ17 1JO-04-06Z C1BX17 6400-05-06-O C1KQ25 1JO-06Z C1AX27 C1AX28 202702-6-6S 202702-6-8S C1KQ26 1JO-08-06Z
Fluid Conveying
C1AX25 202702-6-10S C1BX22 6400-12-06-O C1AX31 202702-8-4S C1KQ18 1JO-04-08Z C1AX32 202702-8-5S C1AX33 C1AX34 202702-8-6S 202702-8-8S 202702-8-10S C1KQ22 1JO-06-08Z
C1KQ30 1JO-08Z C1AX29 C1KQ31 1JO-10-08Z C1AX30 202702-8-12S C1KQ34 1JO-12-08Z C1BX26 6400-16-08-O C1AW84 202702-10-4S C1KQ19 1JO-04-10Z C1AW85 202702-10-6S C1KQ23 1JO-06-10Z C1KQ27 1JO-08-10Z C1AW86 202702-10-8S C1KQ33 1JO-10Z C1AW81 202702-10-10S C1KQ35 1JO-12-10Z C1AW82 202702-10-12S C1AW83 202702-10-16S C1BX15 6400-04-12-O C1AW91 202702-12-6S C1KQ24 1JO-06-12Z C1KQ28 1JO-08-12Z C1AW92 202702-12-8S 0.50 0.75 1.0 0.25 0.38 0.63 0.50
7/8-14 7/8-14 7/8-14 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12
988
Adapters
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.63 0.75 1.0 1.25 0.50 0.50 0.63 0.75 1.0 A (in) 1.86 1.86 1.97 1.97 2.04 2.07 2.30 1.77 1.79 1.80 1.89 1.99 1.89 2.04 1.93 2.22 2.33 2.08 2.07 2.12 2.09 2.17 2.15 2.53 2.42 2.20 2.09 2.24 2.24 2.37 1.01 0.91 1.02 0.74 0.67 0.68 0.79 0.45 0.50 0.48 0.60 0.32 0.39 0.32 Price Each
Thread T1 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12
Thread T2 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 3/4-16 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12
Wt.
C1KQ32 1JO-10-12Z C1AW87 202702-12-10S C1KQ38 1JO-12Z C1AW88 202702-12-12S C1AW89 202702-12-16S 202702 Male SAE O-Ring Boss / Male 37 Flare C1KQ39 1JO-16-12Z C1AW90 202702-12-20S C1BX20 6400-08-14-O C1AX11 202702-16-8S C1KQ29 1JO-08-16Z C1AW96 202702-16-10S C1AW97 202702-16-12S C1KQ36 1JO-12-16Z C1AW98 202702-16-16S C1KQ42 1JO-16Z C1KQ43 1JO-20-16Z C1AW99 202702-16-20S C1AX12 202702-20-12S C1KQ37 1JO-12-20Z C1AX13 202702-20-16S C1KQ40 1JO-16-20Z C1AX14 202702-20-20S 1.25 1.50 1.0 1.25 1.50 C1KQ45 1JO-20Z C1AX15 202702-20-24S C1KQ46 1JO-24-20Z C1AX16 202702-24-16S C1KQ41 1JO-16-24Z C1AX17 202702-24-20S C1KQ44 1JO-20-24Z C1AX18 202702-24-24S 1.0 1.25 0.75
0.35 0.48
1-5/16-12 1-5/8-12 1-5/8-12 1-5/8-12 1-5/8-12 1-5/8-12 1-5/8-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 1-7/8-12 1-7/8-12 1-7/8-12
0.97
C1KQ47 1JO-24Z 1-7/8-12 1-7/8-12 2.36 Note: 6400 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 1JO is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 0.25 0.38 0.50 0.75
Catalog Part No.
Thread T1 7/16-20 9/16-18 3/4-16 1-1/16-12
Thread T2 7/16-20 9/16-18 3/4-16 1-1/16-12
A (in) 2.31 2.56 3.61
Wt. 0.10 0.16 0.29 0.82
Price Each
C1HD33 202713-4-4S C1HD34 202713-6-6S C1AX35 202713-8-8S C1JF40 202713-12-12S
202713 Male SAE O-Ring Boss / Male 37 Flare (Long)
989
Adapters

Catalog Part No. C1BD84 Tube O.D. Aeroquip Model (in) 2266-6-6S 0.38 0.50 A (in) 0.96 0.12 1.18 1.02 1.16 1.11 1.20 1.52 1.33 1.52 1.51 2.42 0.48 1.72 0.32 0.13 0.19 0.11 Price Each
Thread T1 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16
Thread T2 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12
Wt.
C1KR57 2OJ-06Z C1BD85 2266-6-8S C1KR56 2OJ-06-08Z
2266 Male SAE O-Ring Boss / Female 37 C1BD86 2266-8-8S C1DV82 2266-10-10S Flare Swivel
C1KR59 2OJ-12Z C1BD82 C1BD83 C1KR60 2OJ-16Z 2266-16-16S 2266-12-12S
C1KR58 2OJ-08Z
0.50 0.63 0.75 1.0 1.25
3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12
C1FD41 6402-20-20-O
Note: 6402 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 2OJ is Eaton-Winner model. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.25 0.25 0.31 0.25 0.38 7/16-20 1/2-20 1/2-20 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 0.50 0.63 0.50 0.63 0.75 0.50 0.75 1.00 0.75 1.0 1.00 1.25 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 7/16-20 7/16-20 1/2-20 7/16-20 9/16-18 9/16-18 3/4-16 9/16-18 3/4-16 3/4-16 7/8-14 3/4-16 3/4-16 7/8-14 1-1/16-12 3/4-16 1-1/16-12 1-1/16-12 1-5/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1.74 1.07 1.73 1.40 1.71 1.34 1.86 1.47 1.84 1.52 1.84 1.47 1.79 1.50 1.94 1.52 1.94 1.63 1.14 1.37 0.66 0.83 0.84
Catalog Part No.
A (in)
B (in)
Wt. 0.10 0.09 0.12 0.11 0.12
Price Each
C1AZ28 2061-4-4S
1.05 0.72 1.05 0.77 1.05 0.77 1.14 0.82 1.14 0.83 1.10 0.93 1.17 0.98 1.30 0.87 1.28 1.02 1.30 0.98 1.36 1.11 1.52 1.10 1.52 1.00 1.52 1.11
Fluid Conveying
C1DY82 6802-04-05-NWO C1AZ29 2061-5-5S C1DY83 6802-04-06-NWO C1AZ30 2061-6-6S C1KQ48 1JO4-06OGZ
2061 6802-08-06-NWO- 0.50 Male SAE O-Ring Boss / Male 37 Flare C1JC54 F 45 Elbow C1DY87 6802-06-08-NWO 0.38
C1KQ50 1JO4-08OGZ C1AZ31 2061-8-8S C1HZ23 2061-8-10S C1KQ49 1JO4-08-10OGZ C1AZ23 2061-10-8S C1AZ22 2061-10-10S C1JC29 2061-10-12S C1DY90 6802-08-12-NWO C1AZ24 2061-12-12S C1KQ51 1JO4-12OGZ C1FD26 2061-12-16S C1AZ25 2061-16-12S C1AZ26 2061-16-16S C1KQ52 1JO4-16OGZ C1JR54 2061-20-16S C1AZ27 2061-20-20S
0.16 0.18 0.21 0.26 0.32 0.34 0.42 0.47 0.59
Note: 6802 is Brennan model, 6802-*F is forged Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 1JO4 is Eaton-Winner model.
990
Adapters
Catalog Part No. Tube O.D. M (in) Thread B1 Thread B2 L (in) (in) 0.25 0.50 7/16-20 3/4-16 7/16-20 3/4-16 1.05 0.89 1.23 1.26 Price Each
Brennan Model
Wt. 0.08 0.26
C1DZ47 6810-04-04-NWO C1DZ49 6810-08-08-NWO
6810-NWO Male SAE O-Ring Boss / Female 37 Flare Swivel
Catalog Part No. C1AZ49
Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 0.19 0.25 0.31 0.38 0.50 3/8-24 7/16-20 7/16-20 7/16-20 7/16-20 7/16-20 7/16-20 1/2-20 1/2-20 1/2-20 1/2-20 9/16-18 9/16-18 0.38 0.50 0.63 0.31 0.38 0.50 0.63 0.75 1.0 0.38 0.50 9/16-18 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 7/8-14 7/8-14 0.63 0.75 1.0 0.38 0.50 7/8-14 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12 3/8-24 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 7/16-20 1/2-20 9/16-18 3/4-16 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 9/16-18 3/4-16 2062-4-4S
A (in)
B (in)
Wt. 0.10 0.09 0.15 0.10 0.15 0.15 0.10 0.10 0.30 0.12 0.15 0.19
Price Each
C1BX90 6801-03-03-NWO C1KQ54 1JO9-04OGZ C1BX92 6801-05-04-NWO C1AZ50 2062-4-6S C1KQ55 1JO9-06-04OGZ
0.92 0.86 1.03 0.89 1.07 0.96 1.06 0.98 1.19 1.06 1.18 1.06 1.18 1.25 1.13 0.95 1.09 0.95 1.19 1.06 1.18 1.25 1.25 1.05 1.25 1.05 1.25 1.06 1.25 1.06 1.32 1.25 1.32 1.30 1.40 1.45 1.45 1.09 1.45 1.18 1.45 1.14 1.45 1.18 1.45 1.25 1.57 1.50 1.54 1.45 1.73 1.77
2062 Male SAE O-Ring Boss / Male 37 Flare C1BX91 6801-04-05-NWO 0.25 C1AZ51 2062-5-5S 0.31 90 Elbow
C1AZ52 2062-5-6S C1BX98 6801-08-05-NWO C1AZ53 C1AZ54 C1AZ55 2062-6-4S 2062-6-6S 2062-6-8S C1KQ53 1JO9-04-06OGZ C1KQ59 1JO9-06OGZ C1KQ60 1JO9-08-06OGZ C1BX99 6801-10-06-NWO C1BX94 6801-05-08-NWO C1KQ56 1JO9-06-08OGZ C1AZ58 C1AZ59 C1AZ56 2062-8-6S 2062-8-8S 2062-8-10S C1KQ65 1JO9-08OGZ C1KQ66 1JO9-10-08OGZ C1KQ69 1JO9-12-08OGZ C1AZ57 2062-8-12S C1BY17 6801-16-08-NWO C1KQ57 1JO9-06-10OGZ C1AZ34 2062-10-6S C1AZ35 2062-10-8S C1KQ61 1JO9-08-10OGZ C1KQ68 1JO9-10OGZ C1AZ32 C1KQ70 C1AZ33 2062-10-10S 1JO9-12-10OGZ 2062-10-12S 0.38 0.50 0.25
C1BX97 6801-08-04-NWO
0.38 0.30 0.21 0.25 0.32 0.49
1.74 1.81 1.73 1.26 1.70 1.14 1.71 1.25 1.73 1.37 1.73 1.49 1.71 1.45 1.85 1.74 1.78 1.66 1.93 1.81 1.94 1.29 1.94 1.36
0.82 0.37 0.34
0.36 0.52 0.65 0.45 0.55
C1BY18 6801-16-10-NWO C1BX96 6801-06-12-NWO C1AZ39 2062-12-8S
991
Adapters

Catalog Part No. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 1-1/16-12 1-1/16-12 0.63 0.75 1.0 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1.0 1.25 1.0 1.25 1.50 1.25 1.50 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-5/8-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 1-7/8-12 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-3/16-12 3/4-16 3/4-16 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-5/8-12 1-5/8-12 1-7/8-12 A (in) B (in) Price Each
Wt.
C1KQ62 1JO9-08-12OGZ C1KQ67 1JO9-10-12OGZ C1AZ36 2062-12-10S C1KQ72 1JO9-12OGZ C1AZ37 2062-12-12S C1AZ38 2062-12-16S
2.01 1.49 2.01 1.61 1.93 1.54 2.01 1.74 1.94 1.66 2.05 1.81 2.15 1.92 2.00 1.72 2.15 1.63 2.05 1.47 2.05 1.76 2.15 1.88 2.15 1.92 2.05 1.81 2.34 2.19 2.21 2.06 2.20 2.09 2.32 2.12 2.25 2.06 2.32 2.18 2.39 2.33 2.48 2.34 2.39 2.20 2.39 2.33 2.16 2.14 2.14 1.44 1.70 1.78 0.30 0.96 0.99 0.75 0.59 0.79 0.57
C1KQ73 1JO9-16-12OGZ 2062 Male SAE O-Ring Boss / Male 37 Flare C1BY15 6801-14-14-NWO 0.88 C1KQ63 1JO9-08-16OGZ 90 Elbow C1AZ44 2062-16-8S C1AZ41 2062-16-12S C1KQ71 1JO9-12-16OGZ C1KQ75 1JO9-16OGZ C1AZ42 2062-16-16S C1KQ76 1JO9-20-16OGZ C1AZ43 2062-16-20S C1AZ45 2062-20-16S C1KQ74 1JO9-16-20OGZ C1AZ46 2062-20-20S C1KQ78 1JO9-20OGZ C1AZ47 2062-20-24S C1KQ77 1JO9-20-24OGZ C1EX61 2062-24-20S C1AZ48 2062-24-24S 0.50 0.75
Fluid Conveying
C1KQ79 1JO9-24OGZ 1-7/8-12 1-7/8-12 2.48 2.46 Note: 6801 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 1JO9 is Eaton-Winner model. Tube O.D. Aeroquip Model (in) Thread T1 Thread T2 9/16-18 0.38 0.50 0.63 0.75 1.0 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12
Catalog Part No.
A (in)
B (in)
Wt. 0.20 0.35 0.57 0.94 1.34 3.36
Price Each
C1KQ58 1JO9-06OGLZ C1AZ62 206209-6-6S C1KQ64 1JO9-08OGLZ C1AZ63 206209-8-8S C1FF63 206209-10-10S C1AZ60 206209-12-12S C1AZ61 206209-16-16S
2.08 1.06 2.08 1.06 2.50 1.28 2.48 1.25 2.89 1.45 3.34 1.66 3.72 1.81 4.41 2.06
C1KA48 206209-20-20S 1.25 1-5/8-12 206209 Note: SAE O-Ring Boss O-Rings page 1099 Male SAE O-Ring Boss / Male 37 Flare Note: 1JO9 is Eaton-Winner model. Long 90 Elbow
992
Adapters
Catalog Part No. Tube O.D. M (in) Thread B1 Thread B2 L (in) (in) 0.25 0.38 0.50 0.63 1.0 9/16-18 9/16-18 3/4-16 7/8-14 1-5/16-12 7/16-20 9/16-18 3/4-16 7/8-14 1-5/16-12 1.12 1.25 1.25 1.25 1.39 1.45 1.60 1.70 2.01 2.04 Price Each
Brennan Model
Wt. 0.14 0.16 0.31 0.40 1.10
C1DZ39 6809-06-04-NWO C1DZ40 6809-06-06-NWO C1DZ42 6809-08-08-NWO C1DZ43 6809-10-10-NWO C1DZ45 6809-16-16-NWO
6809-NWO Male SAE O-Ring Boss / Female 37 Flare Swivel 90 Elbow
Catalog Part No.
Tube O.D. A B C Aeroquip Model (in) Thread T1 Thread T2 (in) (in) (in) Wt. 7/16-20 0.25 7/16-20 7/16-20 9/16-18 0.38 0.50 0.63 9/16-18 3/4-16 3/4-16 7/8-14 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1.07 0.96 0.96 1.03 0.89 0.89 0.10 1.19 1.06 1.06 0.15 1.25 1.06 1.06 1.25 1.06 1.06 0.15 1.45 1.30 1.30 1.45 1.25 1.25 0.31 1.70 1.45 1.45 0.46
Price Each
C1KT37 AJJO-04OGZ C1AX62 203005-4-4S 6804-06-04-06-NW C1HR13 O C1KT38 AJJO-06OGZ C1AX64 203005-6-6S C1KT39 AJJO-08OGZ
Fluid Conveying
203005 C1AX65 203005-8-8S Male SAE O-Ring Boss / Male 37 Flare C1FJ94 203005-10-10S / Male 37 Flare Tee C1KT40 AJJO-12OGZ
C1AX61 203005-12-12S C1ES74 203005-16-16S
1-1/16-12 1-1/16-12 2.01 1.74 1.74 0.75 1-1/16-12 1-1/16-12 1.94 1.66 1.66 0.81 1 1-5/16-12 1-5/16-12 2.05 1.81 1.81 1.02
Note: 6804 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: AJJO is Eaton-Winner model. Tube A B O.D. (in) Thread T1 Thread T2 (in) (in) 0.25 0.38 0.50 0.75 1.0 7/16-20 9/16-18 3/4-16 3/4-16 1-1/16-12 1-1/16-12 1-5/16-12 7/16-20 9/16-18 3/4-16 3/4-16 1.03 0.89 1.25 1.06 1.45 1.06 1.45 1.25 0.34 0.85 1.30
Catalog Part No.
Aeroquip Model
Wt. 0.10 0.17
Price Each
C1AX58 203003-4-4S C1AX59 203003-6-6S C1KT43 AJOJ-08OGZ C1AX60 203003-8-8S C1KT44 AJOJ-12OGZ C1FA54 203003-12-12S C1AX57 203003-16-16S
1-1/16-12 2.01 1.74 1-1/16-12 1.94 1.66 1-5/16-12 2.05 1.81
203003 Male SAE O-Ring Boss / Male 37 Flare
Note: 6803-*F is forged Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: AJOJ is Eaton-Winner model.
993
Adapters
Steel Straight Thread O-Ring to Straight Thread O-Ring

Brennan Model
Thread B1 9/16-18 3/4-16 1-1/16-12 1-5/16-12 1-5/8-12
Thread B2 9/16-18 3/4-16 1-1/16-12 1-5/16-12 1-5/8-12
L (in) Wt. 1.50 1.56 2.32 2.13 2.13 0.10 0.19 0.47 0.63 0.93
C1ES94 3474-06-06-NWO C1ES95 3474-08-08-NWO C1ES97 3474-12-12-NWO C1HD79 3474-16-16-NWO C1JF46 3474-20-20-NWO
3474-NWO Male SAE O-Ring Boss Adjustable / Male SAE O-Ring Boss
Note: 6403 is Tompkins model which is ridgid both ends (not adjustable). SAE O-Ring Boss O-Rings page 1099 Tube O.D. (in) 0.25 0.50 0.63
Catalog Part No.
Brennan Model
Thread B1 7/16-20 3/4-16 7/8-14
Thread B2 7/16-20 3/4-16 7/8-14
M (in) 1.0 1.47 1.47
Wt. 0.09 0.33 0.49
Price Each
C1EU11 6807-04-04-NWO C1EU13 6807-08-08-NWO C1EU14 6807-10-10-NWO
Fluid Conveying
6807-NWO Male SAE O-Ring Boss Adjustable / Male SAE O-Ring Boss 90 Elbow
Catalog Part No.
Aeroquip Model
Thread T1 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-1/16-12
Thread T2 9/16-18 7/16-20 7/16-20 3/4-16 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 9/16-18 3/4-16 1-1/16-12 7/16-20 9/16-18 3/4-16 7/8-14
A (in) 1.16 1.22 1.03 1.39 0.81 1.06 1.39 1.48 1.65 0.81 1.25 1.66 1.09 1.00 1.00 1.44
Wt. 0.08 0.07 0.07 0.13 0.08 0.11 0.15 0.19 0.33 0.09 0.13 0.33 0.23 0.22 0.17 0.27
Price Each
C1DY34 6410-04-06-O C1DY35 6410-05-04-O
C1DY36 6410-06-04-O C1DY37 6410-06-08-O C1DY38 6410-08-04-O
FF1010 C1CU56 FF1010-0806S Male SAE O-Ring Boss / Female SAE C1DY40 6410-08-08-O O-Ring Boss C1DY41 6410-08-10-O
C1DY42 6410-08-12-O C1CU57 FF1010-1006S C1CU58 FF1010-1008S C1DY44 6410-10-12-O C1DY45 6410-12-04-O C1EC64 FF1010-1206S C1CU59 FF1010-1208S C1HX78 FF1010-1210S
994
Adapters
Steel Straight Thread O-Ring to Straight Thread O-Ring
Catalog Part No. Aeroquip Model Thread T1 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 Thread T2 1-5/16-12 9/16-18 3/4-16 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-1/16-12 1-5/16-12 A (in) 1.79 1.13 1.00 1.59 1.71 1.00 1.65 1.00 1.00 0.64 0.51 0.76 0.29 Wt. 0.34 0.35 0.31 0.34 Price Each
C1EC65 FF1010-1216S C1DY51 6410-16-06-O C1HK63 FF1010-1608S C1EQ30 FF1010-1612S C1KS61 5O-16-12Z
FF1010 C1CU60 FF1010-2016S Male SAE O-Ring Boss / Female SAE C1KS62 5O-20-16Z O-Ring Boss C1DY60 6410-24-12-O
C1DY61 6410-24-16-O
C1DY62 6410-24-20-O 1-7/8-12 1-5/8-12 1.58 Note: 6410 is Brennan model. SAE O-Ring Boss O-Rings page 1099 Note: 5O is Eaton-Winner model. Catalog Part No. C1CA99 A (in) 0.67 0.67 0.67 0.73 0.73 0.80 0.80 0.93 0.93 1.09 1.09 1.12 1.12 1.20 1.20 1.27 1.27 1.43
Thread T 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12 1-7/8-12 2-1/2-12
Wt. 0.04 0.04 0.08
Price Each
C1KR86 4O-04Z C1CB11 900598-5S C1CB12 900598-6S
900598 Male SAE O-Ring Boss Plug
C1KR87 4O-06Z C1KR88 4O-08Z C1CB13 900598-8S C1KR89 4O-10Z C1CA93 C1CA94 C1CA95 C1CA96 900598-10S 900598-12S 900598-16S 900598-20S C1KR90 4O-12Z C1KR91 4O-16Z C1KR92 4O-20Z C1KR93 4O-24Z C1CA97 900598-24S C1CA98 900598-32S Note: SAE O-Ring Boss O-Rings page 1099 Note: 4O is Eaton-Winner model. Tube O.D. Aeroquip Model (in) 0.19 0.25 0.38 0.50 0.63 0.75 1.00
Fluid Conveying
0.11 0.18 0.32 0.49
0.81 1.14 2.31
Catalog Part No.
Thread T 3/8-24 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12
A (in)
B (in)
C (in)
Wt. 0.01 0.01 0.03 0.05 0.50 0.14 0.24
Price Each
C1EL58 FF2138-03S C1KR94 4ON-04Z C1CV21 FF2138-04S C1KR95 4ON-06Z
0.38 0.13 0.50 0.45 0.20 0.45 0.19 0.56 0.48 0.24 0.48 0.25 0.69 0.56 0.31 0.56 0.31 0.88 0.63 0.38 1.0 0.75 0.56 1.25 0.77 1.50 0.63
FF2138 Male SAE O-Ring Boss Plug Hex Socket
C1CV23 FF2138-06S C1KR96 4ON-08Z C1CV24 FF2138-08S C1CV25 FF2138-10S C1CV26 FF2138-12S C1FQ26 FF2138-16S
Note: SAE O-Ring Boss O-Rings page 1099 Note: 4ON is Eaton-Winner model.
995
Adapters
Steel Straight Thread O-Ring to Hose

Catalog Part No. Brennan Model Hose ID (in) 5/8 Thread B2 3/4-16 M L (in) (in) 1.50 0.80 Wt. 0.11 Price Each
C1HJ41 4604-10-08-O
4604 Hose Barb / Male SAE O-Ring Boss
Catalog Part No.
Brennan Model
Hose ID (in) 1/2 3/4 1-1/4
Thread B2 3/4-16 1-1/16-12 1-5/8-12
M L (in) (in) 1.91 1.45 2.06 1.94 2.38 2.25
Wt. 0.22 0.56 1.63
Price Each
C1GE66 4601-08-08-NWO C1FQ72 4601-12-12-NWO C1FQ74 4601-20-20-NWO
4601 Hose Barb / Male SAE O-Ring Boss 90 Elbow
Fluid Conveying
996
Adapters
Steel SAE Split Flange to 37 Flare
Catalog Part No. C1BR95 C1BR88 Split Flange Tube Size O.D. Aeroquip Model 500025-8S 500025-12S 0.50 0.75 0.75 1.00 1.00 1.00 1.25 1.25 1.50 1.50 1.00 1.00 1.25 1.25 0.75 0.75 0.50 A (in) 1.66 1.99 1.91 2.30 2.10 2.01 2.35 2.46 2.46 2.33 0.50 0.61 0.35 0.48 Price Each
Thread T 3/4-16 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 1-7/8-12
Wt. 0.18
C1KP32 1JFL-12Z C1BR89 500025-16-12S
500025 Code 61 Split Flange / Male 37 Flare C1BR90 500025-16S (For pressures thru 4 Light Spiral Hose) C1BR91 500025-20-16S
C1BR92 500025-20S C1BR93 500025-24-20S C1KP34 1JFL-24Z
C1KP33 1JFL-16Z
0.75 0.90
Note: Flange O-Rings page 1098 Note: 1JFL is Eaton-Winner model. Split Flange Tube Aeroquip Model Size O.D. FF5239-1616S 1.00 1.00
Catalog Part No. C1JF26
Thread T 1-5/16-12
A (in) 3.76
Wt. 0.78
Price Each
Note: Flange O-Rings page 1098 Note: FF5239 is longer than 500025.
Fluid Conveying
FF5239 Code 61 Split Flange / Male 37 Flare (For pressures thru 4 Heavy Spiral Hose)
Catalog Part No. Split Flange Tube Aeroquip Model Size O.D. 0.75 1.0 1.25 0.75 1.0 1.25 A (in) B (in) Price Each
Thread T 1-1/16-12 1-5/16-12 1-5/8-12
Wt. 0.42 0.64 0.89
C1BR72 500023-12S C1BR73 500023-16S C1BR74 500023-20S
2.77 1.01 3.04 1.13 3.24 1.12
Note: Flange O-Rings page 1098 Note: FF5238 models have different dimensions
500023 / FF5238 Code 61 Split Flange / Male 37 Flare 45 Elbow (For pressures thru 4 Light Spiral Hose) Catalog
Part No.
Split Flange Tube Aeroquip Model Size O.D. 0.75 1.00 1.00 1.25 1.25 1.25 1.50 1.50 2.00 2.00 1.50 0.75 0.75 1.0 0.75 1.0 1.25 1.0 1.50
Thread T 1-1/16-12 1-1/16-12 1-5/16-12 1-1/16-12 1-5/16-12 1-5/8-12 1-5/16-12 1-7/8-12 1-7/8-12 1-7/8-12
A (in)
B (in)
Wt. 0.46 0.55 0.73 0.64 0.81 1.04 1.04 1.46 1.74
Price Each
C1BR76 500024-12S C1BR77 500024-16-12S C1BR78 500024-16S C1BR79 500024-20-12S C1BR80 500024-20-16S
2.49 2.15 2.49 2.15 2.79 2.37 2.49 2.15 2.79 2.37 3.14 2.50 2.79 2.44 3.58 2.75 2.93 4.25 3.58 2.75
500024 Code 61 Split Flange / Male 37 Flare C1BR82 500024-24-16S C1BR84 500024-24S 90 Elbow (For pressures thru 4 Light Spiral Hose) C1KP35 1JFL9-24-32Z
C1BR85 500024-32-24S
C1BR81
500024-20S
Note: Flange O-Rings page 1098 Note: 1JFL9 is Eaton-Winner model.
997
Adapters
Steel SAE Split Flange to 37 Flare

Catalog Part No. Split Flange Tube Size O.D. Aeroquip Model 1.0 1.25 1.25 1.50 1.0 1.0 1.25 1.25 A (in) B (in) Price Each
Thread T 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12
Wt. 0.88 0.99 1.23 1.40
C1CV27 FF5162-1616S C1ED14 FF5162-2016S C1ED15 FF5162-2020S C1ED16 FF5162-2420S
3.41 2.38 3.41 2.38 3.71 2.62 4.33 3.12
FF5162 Code 61 Split Flange / Male 37 Flare 90 Elbow (For pressures thru 4 Heavy Spiral)
Catalog Part No. Split Flange Tube Aeroquip Model Size O.D. 0.75 1.00 1.00 1.25 1.25 1.25 1.25 1.0 1.00 0.75 Thread T 1-1/16-12 1-5/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-5/8-12 A (in) 3.17 2.47 3.76 3.76 2.71 3.84 1.20 0.81 1.11 Wt. 0.50 Price Each
C1CV37 FF5541-1212S C1KP36 1JFS-16Z C1CV38 FF5541-1616S
FF5541 Code 62 Split Flange / Male 37 Flare C1KP37 1JFS-20Z C1CV39 FF5541-2020S (For pressures thru 6 Spiral)
C1ZX87 FF5541-2016S
Fluid Conveying
Note: Flange O-Rings page 1098 Note: 1JFS is Eaton-Winner model. Split Flange Tube Aeroquip Model Size O.D. 1.50 1.50
Catalog Part No.
Thread T 1-7/8-12
A (in)
B (in)
Wt. 2.08
Price Each
C1FM83 1803-2424
Note: Flange O-Rings page 1098 Note: 1803 is Brennan model.
FF5539 Code 62 Split Flange / Male 37 Flare 45 Elbow (For pressures thru 6 spiral)
Catalog Part No. C1HY73 Split Flange Tube Aeroquip Model O.D. Size 1804-16-12-FG 0.75 1.0 1.0 1.25 1.25 1.00 0.75 1.00 1.00 1.25 Thread T 1-5/16-12 1-1/16-12 1-5/16-12 1-5/8-12 1-5/16-12 A (in) B (in) Wt. 1.08 0.67 0.93 1.07 1.43 Price Each
2.56 1.80 2.81 2.13 3.41 2.38 3.41 2.38 3.71 2.62
C1ZX89 FF5540-1612S C1CV35 FF5540-1616S C1ZX88 FF5540-2016S
C1CV36 FF5540-2020S
FF5540 Code 62 Split Flange / Male 37 Flare 90 Elbow (For pressures thru 6 Spiral)
Note: Flange O-Rings page 1098 Note: 1804 is Brennan model. 1804-*FG is forged Brennan model.
998
Adapters
Steel SAE Split Flange to O-Ring Face Seal
Catalog Part No. C1JS43 Tube O.D. (in) 1.00 Price Each
Brennan Model FS1700-16-16
Thread ST1 1-7/16-12
Flange Size L (in) Wt. 1 2.80 0.97
Note: Flange O-Rings page 1098 ORS O-Rings page 1098
FS1700 Code 61 Split Flange / Male O-Ring Face Seal
Catalog Part No. C1JS29
Aeroquip Model FF5945T1616S
Split Flange Size 1.00
Thread T 1-7/16-12
A (in)
B (in)
Wt. 1.07
Price Each
3.22 2.37
Note: Flange O-Rings page 1098 ORS O-Rings page 1098
FF5945 Code 62 Split Flange / O-Ring Face Seal 90 Elbow
999
Adapters
Steel Braze & Weld to 37 Flare

Catalog Part No. C1BZ32 C1BZ33 C1BZ34 C1BZ35 C1BZ27 Tube O.D. Aeroquip Model (in) 73014-4S 73014-5S 73014-6S 73014-8S 73014-10S 73014-12S 0.25 0.31 0.38 0.50 0.63 0.75 1.0 1.25 1.50 2 A (in) B (in) C (in) Price Each
Thread T 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12
Wt. 0.02 0.03 0.03 0.07 0.10 0.15 0.23 0.39 0.58 1.16
0.74 0.25 0.16 0.80 0.31 0.16 0.81 0.38 0.16 0.94 0.50 0.16 1.07 0.63 0.16 1.24 0.75 0.25 1.29 1.0 0.25 1.40 1.25 0.25 1.58 1.50 0.25 1.96 2.0 0.25
73014 Braze Port / Male 37 Flare
C1BZ28
C1BZ29 73014-16S C1BZ30 73014-20S C1HJ75 73014-24S C1BZ31 73014-32S
Fluid Conveying
1000
Adapters
Steel 42 Inverted Flare to 37 Male Flare
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 A (in) 0.62 Price Each
Thread T1 3/8-24
Thread T2 7/16-20
Wt. 0.04
C1EV62 202124-3-4S
202124 Male 42 Inverted Flare / Male 37 Flare
1001
Adapters
Steel Restrictor
Catalog Part No. Tube O.D. Aeroquip Model (in) 0.38 0.50 A (in) 1.19 1.36 Price Each
Thread T1 9/16-18 3/4-16
Thread T2 9/16-18 3/4-16
Wt. 0.08 0.12
C1CU93 FF1981-000-0606 C1FC48 FF1981-000-0808
Note: Aeroquip restrictor adapters are available in orifice sizes from .06 to .25 inches. Part Number example: Model FF1981-0606 with .125" orifice would be specified as FF1981-125-0606. Model FF1981-000-0606 is a "blank" to be drilled to suit.
FF1981 Restrictor Male 37 Flare / Female 37 Flare

Catalog Part No. A (in) B (in) Price Each
Aeroquip Model
Thread P1 1/4-18
Thread P2 1/4-18
Wt. 0.10
C1JC81 FF1980-000-0404
1.39 0.64
Note: Aeroquip restrictor adapters are available in orifice sizes from .06 to .25 inches. Part Number example: Model FF1980-0404 with .090" orifice would be specified as FF1980-090-0404. Model FF1980-000-0606 is a "blank" to be drilled to suit.
Fluid Conveying
FF1980 Restrictor Male Pipe / Female Pipe
1002
Adapters
Steel Metric to 37 Flare
Catalog Part No. Tube O.D. Thread T1 Thread T2 A R Dia. (mm) (in) (in) (mm) Aeroquip Model (in) 0.38 0.63 0.75 M14 x 1.5 M22 x 1.5 9/16-18 7/8-14 1.22 1.54 8 15 18 Price Each
Wt. 0.05 0.15 0.25
C1ZZ26 15.063-8-6 C1AK67 15.063-15-10 C1AK68 15.063-18-12
M26 x 1.5 1-1/16-12 1.69
Note: A seal washer may be required. Metric Bonded Seals page 1094
15.063 Male Metric 24 (DIN 3901/3902 1.Rh) / Male 37 Flare

Catalog Part No. Adaptall Model
Tube O.D. 2 Thread 1 (JIC) (mm) 7/16-20 9/16-18 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 --M10 M12 M15 M22 M22
Thread 3 (mm) M10 x 1.25 M12 x 1.25 M16 x 1.5 M18 x 1.5 M22 x 1.5 M30 x 2.0 M30 x 1.5
Wt. 0.05 0.07 0.09 0.15 0.21 0.41 0.45
Price Each
C1FQ11 9605-04-10X1.25 C1FK34 9605-06-12X1.25 C1KN86 9605S-06-L10-16
9605 Male 37 Flare / Male Metric Dual Purpose (Port or Tube) Low Pressure "L" Series
C1GB57 9605-08-L12-18 C1GB58 9605-10-L15-22 C1JF76 9605-12-L22 C1FR85 9605-16-L22-30X1
Note: A seal washer may be required. Metric Bonded Seals page 1094 Tube O.D. 2 (mm) M16
Fluid Conveying
Catalog Part No.
Adaptall Model
Thread 1 (JIC) 7/8-14
Thread 3 (mm) M24 x 1.5
Wt. 0.34
Price Each
C1ZT54 9606-10-S16-24
Note: A seal washer may be required. Metric Bonded Seals page 1094
9606 Male 37 Flare / Male Metric Dual Purpose (Port or Tube) High Pressure "S" Series
Catalog Part No.
Aeroquip Model
Tube O.D. (in) Thread T1 Thread T2 0.25 0.38 M12 x 1.5 M16 x 1.5 7/16-20 9/16-18
A (in) 1.36 1.40
Wt. 0.09 0.13
Price Each
C1AK70 15.163-4-4 C1AK71 15.163-8-6
15.163 FemaleMetric 24(DIN 3901/3902 1.Rh) / Male 37 Flare
1003
Adapters

Catalog Thread 1 (Male Part No. Adaptall Model JIC) C1FQ79 9022-06-L08-14 C1FQ80 9022-06-L10-16 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 Thread 2 (Female Metric Swivel) M14 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5 M22 x 1.5 Series L L L L L Wt. 0.09 0.12 0.14 0.20 0.25 Price Each
9022 C1FQ81 9022-06-L12-18 Male 37 Flare / Female Metric Swivel C1FQ83 9022-08-L15-22
C1GM76 9022-10-L15-22
Note: L Series are low pressure, S Series are high pressure. Tube O.D. (in) Thread A (in) 7/16-20 0.25 0.25 0.25 0.38 0.38 0.50 0.50 0.50 0.50 0.63 0.63 0.63 0.75 0.75 0.75 1.00 7/16-20 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12
Catalog Part No. C1KP38 C1DB37 C1DB39 C1DB41
Voss Model 1JH-04-10Z JM0410 JM0412 JM0414 JM0614 JM0616 JM0816 JM0818
Thread B (mm) M10 x 1 M10 x 1 M12 x 1.5 M14 x 1.5 M14 x 1.5 M16 x 1.5 M16 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M22 x 1.5 M26 x 1.5 M27 x 2 M33 x 2
C (in) 1.18 1.18 1.22 1.22 1.22 1.32 1.42 1.48 1.65 1.61 1.58 1.71 1.71 1.81 1.91 1.95 2.03
Wt. 0.07 0.06 0.07 0.20 0.10 0.12 0.16 0.17 0.21 0.14 0.20 0.21 0.23 0.25 0.20 0.49
Price Each
JM Male 37 Flare / Metric Male
C1DB43 C1DB45 C1DB47 C1DB48
C1FQ34 JM0820 C1DB50 JM0822 C1DB52 JM1018 C1DB54 JM1020 C1DB56 JM1022 C1DB58 JM1222 C1DB60 JM1226 C1DB61 JM1227 C1ZX71 JM1633
Fluid Conveying
Note: Metric Bonded Seals page 1094 Note: GG108-NP is Aeroquip model which does not come with a seal washer. Note: 1JH is Eaton-Winner model. Tube O.D. (in) 0.25 0.25 0.25 0.38 0.38 0.50 0.50 0.50 0.63 0.63 0.75 1.00
Catalog Part No.
Voss Model
Thread A (in) 7/16-20 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-5/16-12
Thread B (mm) M10 x 1 M12 x 1.5 M14 x 1.5 M14 x 1.5 M16 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5 M18 x 1.5 M22 x 1.5 M22 x 1.5 M33 x 2
C (in) F (in) Wt. 0.89 1.03 0.95 1.09 0.95 1.25 1.06 1.25 1.14 1.45 1.25 1.45 1.26 1.47 1.33 1.70 1.41 1.60 1.45 1.70 1.66 1.78 1.81 2.05 0.10 0.09 0.12 0.13 0.20 0.22 0.24 0.38 0.33 0.40 0.53 0.89
Price Each
C1DB38 JM0410-90 C1DB40 JM0412-90 C1DB42 JM0414-90 C1DB44 JM0614-90 C1DB46 JM0616-90
JM-90 C1FC55 JM0816-90 Male 37 Flare / Metric Male 90 Elbow C1DB49 JM0818-90
C1DB51 JM0822-90 C1DB53 JM1018-90 C1DB57 JM1022-90 C1DB59 JM1222-90 C1EW95 JM1633-90
Note: Metric Bonded Seals page 1094 Note: GG308-NP is Aeroquip model which does not come with a seal washer. Note: 9069 is Voss model which does not come with a seal washer.
1004
Adapters
Catalog Part No. Tube O.D. (in) 0.38 0.25 0.38 0.50 0.50 0.63 0.63 0.75 0.75 0.75 1.0 1.0 Thread A (in) 7/16-20 7/16-20 7/16-20 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 C (in) D (in) Price Each
Voss Model
B (mm) 6MM 8MM 10MM 12MM 14MM 15MM 16MM 16MM 18MM 20MM 22MM 25MM
Wt. 0.04 0.04 0.05 0.12 0.12 0.16 0.18
C1EE16 JT0406 C1DB67 JT0408 C1DB68 JT0610 C1DB69 JT0812
1.58 0.75 1.68 0.88 1.55 0.75 1.97 1.0 1.89 0.93 2.03 0.91 2.07 0.95 2.22 0.95 2.12 0.85 2.38 1.11 2.21 0.89 2.54 1.22
JT Male 37 Flare / Metric Stand Pipe
C1EE17 JT0814 C1EE18 JT1015 C1EE19 JT1016 C1EE20 JT1216 C1EE21 JT1218 C1EE22 JT1220 C1EE23 JT1622 C1EE24 JT1625
0.30 0.28 0.27 0.35 0.40
1005
Adapters
Steel Metric to Pipe

Catalog Part No. Voss Model Thread A (in) 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 3/8-18 1/2-14 1/2-14 3/4-14 1-11-1/2 Thread B (mm) M10 x 1.0 M12 x 1.5 M14 x 1.5 M14 x 1.5 M16 x 1.5 M16 x 1.5 M18 x 1.5 M18 x 1.5 M22 x 1.5 M27 x 2.0 M33 x 2.0 1.47 1.67 1.51 1.69 1.77 1.80 2.0 C (in) 1.18 1.38 1.38 Wt. 0.06 0.11 0.11 0.15 0.13 0.22 0.19 0.28 0.30 0.31 0.58 Price Each
C1EE84 PM0210 C1DH30 PM0412 C1EE85 PM0414
PM Female Pipe / Metric Male
C1GA14 PM0614 C1EE86 PM0616 C1DH31 PM0816 C1EE87 PM0618 C1EE88 PM0818 C1EE89 PM0822 C1EE90 PM1227 C1EE91 PM1633
Note: 9235 is Adaptall model which does not come with a seal washer. Metric Bonded Seals page 1094
Fluid Conveying
1006
Adapters
Steel Metric
Catalog Part No. Voss Model Thread Size D2 M 24x1.5 L1 (mm) 19 Wt. 0.13 Price Each
C1DV32 189-271
189 Metric Parallel Hex Socket Plug Peflex Seal

Maximum Operating Hex Catalog Waltershei Thread Size Diameter Pressure S Length Part No. d Model G-M (mm) D (mm) (mm) I (mm) Wt. (bar) C1KW66 WAL028302 C1KW67 WAL028303 C1KW68 WAL028304 C1KW69 WAL028305 C1KW73 WAL029844 C1KW70 WAL028306 C1KW71 WAL028307 C1KW72 WAL028308 M 10x1.0 M 12x1.5 M 14x1.5 M 16x1.5 M 18x1.5 M 20x1.5 M 22x1.5 M 26x1.5 14 17 19 22 24 26 27 32 400 400 400 400 400 400 400 400 5 6 6 8 8 10 10 12 12.0 17.0 17.0 17.0 17.0 19.0 19.0 21.0 0.01 0.03 0.04 0.05 0.06 0.09 0.11 0.16
Price Each
WAL028 Metric Parallel Hex Socket Plug
1007
Adapters
Steel BSPP to 37 Flare

Catalog Part No. C1FA57 Tube O.D. Aeroquip Model (in) 0.25 0.38 0.38 0.25 0.50 0.63 0.75 1.0 2063-4-6S A (in) 1.38 1.38 1.43 1.53 1.63 1.73 1.99 2.09 Price Each
Thread T1 1/4-19 1/4-19 3/8-19 3/8-19 1/2-14 1/2-14 3/4-14 1-11
Thread T2 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12
Wt. 0.07 0.08 0.10 0.15 0.17 0.20 0.29 0.45
C1AZ66 2063-4-4S C1AZ67 2063-6-6S C1AZ68 2063-6-8S C1AZ70 2063-8-8S C1AZ69 2063-8-10S
2063 C1AZ64 2063-12-12S Male BSPP (British Parallel) / Male 37 C1AZ65 2063-16-16S Flare
Note: A seal washer may be required. BSP Bonded Seals page 1094 Tube O.D. Thread A (in) (in) 0.25 0.25 0.25 0.38 0.38 0.38 0.25 0.25 0.50 0.63 0.63 0.63 0.75 0.75 1.0 1.0 1.0 1.25 1.50 7/16-20 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 3/4-16 7/8-14 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12 1-7/8-12 Thread B (BSPP) 1/8-28 1/4-19 3/8-19 1/4-19 3/8-19 1/2-14 3/8-19 1/2-14 3/4-14 1/2-14 5/8-14 3/4-14 3/4-14 1-11 3/4-14 1-11 2.05 2.20 1.83 1.93 1.71
Catalog Part No. C1DA94 C1DA96
Voss Model JB0404 JB0406
C Seal (in) Washer Wt. 1.10 1.24 1.30 1.25 1.31 1.51 1.48 1.67 Yes Yes Yes Yes Yes Yes Yes Yes No Yes No Yes Yes Yes Yes Yes No Yes Yes 0.05 0.07 0.20 0.07 0.10 0.19 0.15 0.12 0.21 0.22 0.23 0.31 0.39 0.66 0.25 0.66 0.64 0.91 1.22
Price Each
C1DA92 JB0402
C1DA98 JB0604
Fluid Conveying
JB Male 37 Flare / Male BSPP (British Parallel)
C1DB11 JB0606 C1DB13 JB0608 C1DB14 JB0806 C1DB16 JB0808 C1FD51 9005-08-12 C1DB19 JB1008 C1FP99 9005-10-10 C1DB21 JB1012 C1DB23 JB1212 C1DB25 JB1216
C1DB26 JB1612 C1DB27 JB1616 C1FD52 9005-16-20 C1EW93 JB2020 C1JB23 JB2424
1-5/16-12 1-1/4-11 1-1/4-11 2.24 1-1/2-11 2.44
Note: 9005 is Adaptall model, which does not include a seal washer. BSP Bonded Seals page 1094 Catalog Part No. Thread 2 (Female JIC) 7/16-20 9/16-18 3/4-16 Price Each
Adaptall Model
Thread 1 (BSPP) 1/4-19 3/8-19 1/2-14
Wt. 0.07 0.11 0.15 0.18
C1FK29 9021-04-04
C1FK30 9021-06-06 C1FK31 9021-08-06
C1GH73 9021-08-08 1/2-14 3/4-16 9021 Note: A seal washer may be required. BSP Bonded Seals page 1094 Male BSPP (British Parallel) / Female JIC Swivel
1008
Adapters
Catalog Part No. Adaptall Model Thread 1 (Male JIC) 3/4-16 Thread 2 (Female BSPP) 1/2-14 Wt. 0.24 Price Each
C1EW48 9210-0808
9210 Male 37 Flare / Female Flat-Face BSPP

Catalog Part No. Tube O.D. (in) 0.19 0.25 0.38 0.38 0.38 0.50 0.50 0.63 0.75 1.00 Thread A (in) 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12 Thread B (BSPP) 1/8-28 1/4-19 1/4-19 3/8-19 1/2-14 3/8-19 1/2-14 1/2-14 3/4-14 1-11 C (in) F (in) Wt. 0.89 1.03 1.05 1.25 1.06 1.25 1.14 1.45 1.22 1.70 1.25 1.45 1.33 1.70 1.45 1.70 1.66 1.94 1.81 2.05 0.07 0.13 0.10 0.21 0.36 0.24 0.34 0.25 0.67 0.92 Price Each
Voss Model
C1DA93 JB0402-90 C1DA95 JB0404-90 C1DA99 JB0604-90 C1DB12 JB0606-90 C1GC14 JB0608-90 C1DB15 JB0806-90 C1DB17 JB0808-90 C1DB20 JB1008-90 C1DB24 JB1212-90 C1KM66 JB1616-90
JB-90 Male 37 Flare / Male BSPP (British Parallel) 90 Elbow
Note: BSP Bonded Seals page 1094
Fluid Conveying
Catalog Part No.
Adaptall Model
Thread 1 (BSPP) 1/2-14
Seal Thread 2 (JIC) Washer 3/4-16 No
Wt. 0.32
Price Each
C1ZT67 9061-08-08
Note: 9061 is Adaptall model, which does not include a seal washer. BSP Bonded Seals page 1094
9061 Male BSPP (British Parallel) / Female 37 Flare Swivel 90 Elbow

Tube O.D. Female BSPP (in) Thread 0.25 0.38 0.50 0.75 1.00 1/4-19 3/8-19 1/2-14 3/4-14 1-11
Catalog Part No.
Adaptall Model
Male 37 Thread 7/16-20 9/16-18 3/4-16 1-1/16-12 1-5/16-12
L (in) Wt. 0.10 0.14 0.19
Price Each
C1FG54 9240-04-04 C1FG55 9240-06-06
9240 C1FG56 9240-08-08 Female BSPP (British Parallel) / Male C1FG58 9240-12-12 37 Flare C1HJ92 9240-16-16
0.30 0.60
1009
Adapters

Catalog Part No. Adaptall Model Thread 1 (Male JIC) 7/16-20 9/16-18 Thread 2 (Female BSPP) 1/4-19 3/8-19 Wt. 0.10 0.17 Price Each
C1FD56 9250-04-04 C1FD57 9250-06-06
Fluid Conveying
9250 Male 37 Flare / Female BSPP (British Parallel) 90 Elbow
1010
Adapters
Steel BSPP to Pipe
Catalog Part No. Voss Model Thread A (in) 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 C Thread B (BSPP) (in) 1/8-28 1/8-28 1/4-19 3/8-19 1/2-14 3/4-14 1-11 1-1/4-11 1.06 1.42 1.46 1.77 1.85 2.0 2.21 Wt. 0.07 0.12 0.13 0.25 0.03 0.66 0.35 Price Each
C1DG67 PB0202 C1DG69 PB0402 C1DG70 PB0404
1.22 11.00
PB Female Pipe / Male BSPP (British Parallel)
C1DG72 PB0606 C1DG74 PB0808 C1DG76 PB1212 C1DG78 PB1616 C1DG79 PB2020
Note: BSP Bonded Seals page 1094 Catalog Part No. Adaptall Model Seal Thread 2 (NPT) Washer 3/8-18 1/2-14 3/4-14 No Yes No Price Each
Thread 1 (BSPP) 3/8-19 1/2-14 3/4-14
Wt. 0.15 0.23 0.30
C1GG69 9035-06-06 C1KK93 9035S-08-08
9035 Male BSPP (British) / Female Pipe
C1GG71 9035-12-12
Note: 9035 is Adaptall model, which does not include a seal washer. BSP Bonded Seals page 1094
Fluid Conveying
Catalog Part No.
Adaptall Model
Thread 1 (BSPP) 1/8-28 1/4-19 3/8-19 1/2-14 3/4-14 3/4-14
Seal Thread 2 (NPT) Washer 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 3/4-14 No No No No No
Wt. 0.04 0.07 0.12 0.08 0.27 0.27
Price Each
C1JD67 9007-02-02 C1FF84 9007-04-04 C1FQ78 9007-06-06
9007 Male BSPP (British Parallel) / Male Pipe C1FF78 7032-12-12

C1JC63 9007-12-12
C1ZT70 9007-08-08
Note: 7032 is Brennan model. 9007 is Adaptall model, which does not include a seal washer. BSP Bonded Seals page 1094 Catalog Part No. Price Each
Adaptall Model
Thread 1 (NPT) 1/4-18 3/8-18 1/2-14
Thread 2 (BSPP) 1/4-19 3/8-19 1/2-14
Wt. 0.08 0.13 0.22
C1GG64 9023-04-04
9023 Male Pipe / Female BSPP (British) Swivel
9023-06-06-ADPT C1KK90 L C1GG66 9023-08-08
1011
Adapters
Steel BSPP to Metric

Catalog Part No. C1FA46 Voss Model 1MB/22-8 Thread 1 (mm) 22 A Thread 2 (BSPP) (in) 1/2-14 1.84 Wt. 0.65 Price Each
Note: BSP Bonded Seals page 1094 Metric Bonded Seals page 1094
1MB Male BSPP (British Parallel) / Metric Male
Fluid Conveying
1012
Adapters
Steel BSPP to BSPT
Catalog Part No. Adaptall Model Thread 1 (BSPP) 1/4-19 1/2-14 Thread 1 (BSPT) 1/4-19 1/2-14 Wt. 0.07 0.18 Price Each
C1FK28 9003-04-04 C1FP97 9003-08-08
9003 Male BSPP (British Parallel) / Male BSPT (British Tapered)
Note: 9003 is Adaptall model which does not include a seal washer. BSP Bonded Seals page 1094
1013
Adapters
Steel BSPP to O-Ring Face Seal

Catalog Part No. Model Thread 1 (ORFS) Thread 2 (BSPP) Wt. 0.57 Price Each
C1JQ90 FS7002-16-16
6002 / FS7002 Male O-Ring Face Seal / Male BSPP (British Parallel)
Note: 6002 is Adaptall model that includes the BSP Bonded Seal. FS7002 is Brennan model that does not include the BSP Bonded Seal. Note: ORS O-Rings page 1098 BSP Bonded Seals page 1094
Fluid Conveying
1014
Adapters
Steel BSPP
Catalog Part No. Tube O.D. (in) 0.25 0.38 0.63 0.75 A (in) 1.16 1.39 1.92 1.97 Price Each
Voss Model
Thread B1 1/4-19 3/8-19 5/8-14 3/4-14
Thread B2 1/4-19 3/8-19 5/8-14 3/4-14
Wt. 0.07 0.11 0.22 0.30
C1DV45 1B/4 C1DV46 1B/6 C1DV42 1B/10
1B Male BSPP (British Parallel) Union
C1DV43 1B/12
Note: BSPP male has 60 internal cone for hose fitting connection and can also be used as port connection with bonded seal. BSP Bonded Seals page 1094 Catalog Part No. Thread 2 (BSPP) 1/4-19 1/4-19 3/8-19 1/2-14 1/2-14 3/4-14 1-11 Seal Washer No No No No No No No Price Each
Adaptall Model Thread 1 (BSPP) 1/4-19 3/8-19 3/8-19 1/2-14 5/8-14 1-11 1-11
Wt. 0.06 0.08 0.09 0.14 0.16 0.39 0.44
C1FN26 9000-04-04 C1FM38 9000-06-04 C1FN27 9000-06-06
9000 Male BSPP (British Parallel) Nipple
C1FN28 9000-08-08 C1FU25 9000-10-8 C1FU26 9000-16-12 C1GD87 9000-16-16
Note: Seal washer is not included. BSP Bonded Seals page 1094 Catalog Part No. Thread T1 (BSPP) 3/8-19 1/2-14 5/8-14 3/4-14 Thread T2 (BSPP) 3/8-19 1/2-14 5/8-14 3/4-14 Seal Washer Wt. No No No No 0.19 0.30 0.32 0.45 Price Each
Adaptall Model
Fluid Conveying
C1ZW95 9040-06-06 C1ZW94 9040-08-08 C1FK32 9040-10-10
9040 Male BSPP (British Parallel) / Male BSPP Bulkhead
C1JM94 9040-12-12
Note: Seal washer is not included. BSP Bonded Seals page 1094
Catalog Part No. C1FR82 C1FR83 C1FR84
Adaptall Model 9025-06-06 9025-08-08 9025-12-12
Thread 1 (BSPP) 3/8-19 1/2-14 3/4-14 1-11
Thread 2 (BSPP) 3/8-19 1/2-14 3/4-14 1-11
Wt. 0.16 0.23 0.35 0.43
Price Each
9025 Female BSPP (British Parallel) Swivel C1EK30 9025-16-16 Union
Adaptall Model Thread 1 (BSPP) 1/4-19 1/4-19 3/8-19 9015-04-06
Thread 2 (BSPP) 1/4-19 3/8-19 3/8-19
Seal Washer No No No
Wt. 0.09 0.12 0.16 0.24
Price Each
C1FE84 9015-04-04 C1FE85 9015-06-06
9015 C1FE86 9015-08-08 1/2-14 1/2-14 No Male BSPP (British Parallel) / Female Note: Seal washer is not included. BSP Bonded Seals page 1094 BSPP Swivel
1015
Adapters
Steel BSPP
Catalog Part No. Adaptall Model Thread 1 (BSPP) 1/4-19 3/8-19 1/2-14 Thread 2 (BSPP) 1/4-19 3/8-19 1/2-14 Seal Washer No No No Wt. 0.13 0.23 0.37 Price Each
C1FA83 9052-04-04 C1FA86 9052-06-06 C1FA88 9052-08-08
9052 Male BSPP / Adjustable Male BSPP 90 Elbow

Catalog Part No. Adaptall Model C1EK31 9045-04-04 C1EK32 9045-06-06 C1ZT69 9045-08-08 C1EK33 9045-12-12 C1FD53 9045-16-16 Thread 1 (BSPP) 1/4-19 3/8-19 1/2-14 3/4-14 1-11 Thread 2 (BSPP) 1/4-19 3/8-19 1/2-14 3/4-14 1-11 Seal Washer No No No No No Wt. 0.11 0.20 0.32 0.56 0.88 Price Each
9045 Male BSPP (British Parallel) / Female BSPP 90 Elbow

Catalog Part No. Adaptall Model C1ZT68 9060-06-06 Thread 1 (BSPP) 3/8-19 Thread 2 (BSPP) 3/8-19 Seal Washer No Wt. 0.28 Price Each
Fluid Conveying
9060 Male BSPP (British Parallel) / Female BSPP Swivel 90 Elbow

Catalog Part No. Thread 1 (BSPP) 1/4-19 3/8-19 3/4-14 Thread 2 Thread 3 (BSPP) (BSPP) 1/4-19 3/8-19 3/4-14 1/4-19 3/8-19 3/4-14 Seal Washer No No No Price Each
Adaptall Model
Wt. 0.17 0.31 0.84
C1GG72 9090-04-04-04 C1GG73 9090-06-06-06 C1GG75 9090-12-12
9090 Female BSPP (British) Run Tee
Catalog Part No. C1DX52 C1DX53 C1DX54
Voss Model 4B/4 4B/6 4B/8
Tube O.D. (in) 0.125 0.25 0.38 0.50 0.63 0.75 1.0
Thread B1 (BSPP) 1/8-28 1/4-19 3/8-19 1/2-14 5/8-14 3/4-14 1-11
A (in) 0.68 0.68 0.79 0.95 1.00 1.05 1.15
Wt. 0.03 0.06 0.08 0.15 0.20 0.26 0.42
Price Each
C1JC48 4B/2
4B BSPP (British Parallel) Blanking & Closure Plug
C1FF72 4B/10 C1EF62 4B/12 C1DX51 4B/16
Note: BSP Bonded Seals page 1094
1016
Adapters
Steel BSPP
Catalog Part No. Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75 1.0 Price Each
Voss Model
Thread B1 (BSPP) 1/4-19 3/8-19 1/2-14 5/8-14 3/4-14 1-11
Wt. 0.06 0.08 0.13 0.19 0.24 0.31
C1EA44 CB/4 C1EA45 CB/6 C1EA46 CB/8 C1JD73 CB/10
CB BSPP (British Parallel) Blanking Cap 60 Seat
C1EF78 CB/12 C1EA43 CB/16
Catalog Part No.
Voss Model
Thread Size D2 (BSPP) R 1/4
L1 (mm) 0.63
Wt. 0.04
Price Each
C1DV35 189-341
189 BSPP (British Parallel) Closure Plug Peflex Seal
1017
Adapters
Steel BSPT to Pipe

Catalog Part No. Voss Model Thread A (in) 1/8-27 1/4-18 3/8-18 1/2-14 1-11-1/2 C Thread B (BSPT) (in) 1/8-28 1/4-19 3/8-19 1/2-14 1-11 0.99 1.34 1.38 1.85 1.94 Wt. 0.04 0.11 0.15 0.33 0.12 Price Each
C1DG68 PB0202-K C1DG71 PB0404-K C1DG73 PB0606-K C1DG75 PB0808-K C1EU94 PB1616-K Note: 9042 is Adaptall model.
PB-K Female Pipe / Male BSPT (British Tapered)
Fluid Conveying
1018
Adapters
Steel BSPT to 37 Flare
Catalog Part No. Voss Model Thread A (in) 7/16-20 7/16-20 9/16-18 3/4-16 3/4-16 1-5/16-12 C Thread B (BSPT) (in) 1/8-28 1/4-19 3/8-19 3/8-19 1/2-14 1-11 1.10 1.22 1.29 1.41 1.59 2.13 Wt. 0.03 0.05 0.08 0.12 0.20 0.43 Price Each
C1ED96 JB0402-K C1ED98 JB0404-K C1EE13 JB0606-K C1EE14 JB0806-K C1DB18 JB0808-K C1EU82 JB1616-K
JB-K Male 37 Flare / Male BSPT (British Tapered)
Catalog Part No.
Voss Model
Tube O.D. (in) 0.25 0.25 0.25 0.38
Thread A (in) 7/16-20 7/16-20 7/16-20 9/16-18
Thread B (BSPT) 1/8-28 1/4-19 3/8-19 3/8-19
C (in) F (in) Wt. 0.89 0.78 1.05 1.09 1.05 1.22 1.14 1.22 0.05 0.08 0.17 0.11
Price Each
C1ZT21 JB0402-90K C1ED97 JB0404-90K C1DA97 JB0406-90K C1EE12 JB0606-90K
JB-90K Male 37 Flare / Male BSPT (British Tapered) 90 Elbow
1019
Adapters
Steel JIS
Catalog Part No. Voss Model Tube O.D. (in) 3/4 L (mm) Wt. 0.31 Price Each
C1GL48 9222-12 Note: 9222 is Adaptall model.
C-JS JIS (Japanese 30 Flare) Cap

Catalog Part No. C1FA90 C1FA91 L (mm) 35.8 Price Each
Voss Model 9336-04-04 9336-06-06
Tube O.D. (in) 0.25 0.38 0.38
Wt. 0.09 0.20 0.13
C1ZY43 A-06JSM Note: 9336 is Adaptall model.
A-JSM JIS (Japanese 30 Flare) Union

Catalog Part No. Adaptall Model Thread 1 1/4-19 3/4-14 Thread 2 1/4-19 3/4-14 Wt. 0.15 0.69 Price Each
C1HE30 9292-04-04 C1HE32 9292-12-12
Fluid Conveying
9292 Male JIS (Japanese 30 Flare) / Female JIS Swivel 90 Elbow

Catalog Part No. C1FA93 C1FA94 C1FA95 Price Each
Adaptall Model 9999-04 9999-06 9999-08
Size 1/4 3/8 1/2 3/4
Wt. 0.01 0.01 0.02 0.03
C1FX69 9999-12
9999 JIS Sealing Seat
1020
Adapters
Steel JIS 30 Seat (BSPP Thread) To 37 Flare
Catalog Part No. Adaptall Model Thread T1 (in) 7/16-20 9/16-18 3/4-16 Thread T2 (BSPP) 1/4-19 3/8-19 1/2-14 Length (in) Wt. 0.09 0.15 0.17 Price Each
C1FN30 9220-04-04 C1ZW93 9220-06-06 C1ZT66 9220-08-08
9220 Male 37 Flare / Female JIS 30 Seat (BSPP Thread)

Catalog Part No. Thread T2 (BSPP) 1/4-19 Length (in) Price Each
Adaptall Model
Thread T1 (in) 7/16-20
Wt. 0.08
C1FM43 9337-04-04
9337 Male 37 Flare / Male JIS 30 Flare BSPP Thread
1021
Adapters
Steel Komatsu, Kobelco

Catalog Part No. Adaptall Model Thread 1 (mm) M14 x 1.5 M18 x 1.5 M22 x 1.5 M24 x 1.5 M30 x 1.5 Wt. 0.06 0.11 0.18 0.23 0.53 Price Each
C1ZT65 9231-14 C1ZT64 9231-18 C1ZT63 9231-22 C1ZT62 9231-24 C1FD54 9231-30
9231 Male Komatsu Plug (30 Seat & Metric Thread)
Catalog Part No.
Adaptall Model
Thread 1 (mm) M14 x 1.5 M18 x 1.5 M22 x 1.5 M24 x 1.5 M30 x 1.5
Wt. 0.09 0.14 0.21 0.21 0.57
Price Each
C1ZT61 9232-14 C1ZT60 9232-18 C1ZT59 9232-22
9232 Female Komatsu Cap (30 Seat & Metric Thread)
C1ZT58 9232-24 C1FD55 9232-30
Catalog Part No.
Adaptall Model
Wt. 0.08
Price Each
Fluid Conveying
C1GB53 9236-14-14
9236 Male Komatsu Union (30 Seat & Metric Thread)

Catalog Part No. Adaptall Model Thread 1 (mm) M14 x 1.5 M18 x 1.5 M 22 x 1.5 M 30 x 1.5 Thread 2 (mm) M14 x 1.5 M18 x 1.5 M 22 x 1.5 M 30 x 1.5 Wt. 0.15 0.25 0.39 0.94 Price Each C1GH77 9392-14-14
C1GH79 9392-18-18 C1FN31 9392-22-22
9392 Male Komatsu / Female Komatsu 90 Elbow (30 Seat & Metric Thread)
C1FN32 9392-30-30
Catalog Part No.
Adaptall Model
Thread 1 (JIC) 1-1/16-12 1-5/16-12
Tube O.D. 2 (mm) M28 M35
Thread 3 (mm) M36 x 1.5 M45 x 1.5
Wt. 0.56 0.86
Price Each
C1ZT57 9247-12-28-36 C1ZT56 9247-16-35-45
9247 Male 37 Flare / Male Kobelco
1022
Adapters
Stainless Steel Pipe to Pipe
Catalog Part No. SSP Model Thread PT 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 Thread PT1 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 1/4-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 L (in) 1.06 1.45 1.26 3.00 1.45 1.45 1.89 4.00 1.96 1.96 2.34 Wt. 0.03 0.07 0.06 0.19 0.10 0.10 0.16 0.42 0.24 0.28 0.40 Price Each
C1CY47 HN-1/8 C1CY44 HN-1/4 C1EQ65 HN-1/4X1/8 C1CY45 HN-1/4X3 C1CY50 HN-3/8 C1FF14 HN-3/8X1/4 C1CY40 HN-1/2 C1CY42 HN-1/2X4 C1CY48 HN-3/4 C1CY49 HN-3/4X1/2 C1CY39 HN-1
HN Male Pipe Hex Nipple
Catalog Part No.
SSP Model
Thread PT 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2
Thread PT1 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1-11-1/2
L (in) Wt. 0.85 0.85 0.85 1.09 1.10 1.17 1.17 1.36 0.25 0.07 0.06 0.12 0.09 0.20 0.15 0.40
Price Each
C1DJ20 PTR-1/4X1/8 C1DJ25 PTR-3/8X1/8 C1DJ24 PTR-3/8X1/4 C1DJ18 PTR-1/2X1/4 C1DJ19 PTR-1/2X3/8 C1DJ23 PTR-3/4X3/8
Fluid Conveying
PTR Male Pipe / Female Pipe Bushing
C1DJ22 PTR-3/4X1/2 C1DJ21 PTR-1X3/4
Catalog Part No.
SSP Model
Thread PT 1/8-27 1/4-18 3/8-18 1/2-14 1-11-1/2
L (in) Wt. 0.56 0.75 0.78 0.97 1.25 0.02 0.05 0.10 0.05 0.46
Price Each
C1CY56 HP-1/8 C1CY55 HP-1/4 C1CY58 HP-3/8 C1CY54 HP-1/2 C1CY53 HP-1
HP Male Pipe Plug

Catalog Part No. Hex (in) 3/16 1/4 5/16 3/8 5/8 LL (in) Price Each
SSP Model
Thread PT 1/8-27 1/4-18 3/8-18 1/2-14 1-11-1/2
B (in) 0.27 0.41 0.41 0.54 0.69
Wt. 0.01 0.02 0.03 0.06 0.19
C1FC35 CP-1/8 C1FC34 CP-1/4 C1FC36 CP-3/8 C1FC33 CP-1/2 C1ZW89 CP-1
CP Hex Countersunk Pipe Plug
1023
Adapters

Catalog Part No. SSP Model Thread PT 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 Thread PT1 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 L (in) Wt. 0.75 1.13 1.13 1.50 1.53 1.89 0.05 0.10 1.50 0.23 0.33 0.51 Price Each
C1CY30 HC-1/8 C1CY29 HC-1/4 C1CY32 HC-3/8 C1CY28 HC-1/2 C1CY31 HC-3/4
HC Female Pipe Coupling
C1CY27 HC-1
Catalog Part No.
SSP Model
Thread PT1 1/4-18 1/4-18 3/8-18 3/4-14 3/4-14
Thread PT 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2
L (in) Wt. 1.39 1.44 1.69 1.93 2.18 0.10 0.13 0.25 0.44 0.61
Price Each
C1DJ67 RA-1/4X1/4 C1DJ69 RA-3/8X1/4 C1DJ66 RA-1/2X3/8 C1KG37 C1KG36 RA-3/4X1/2 RA-1X3/4
RA Male Pipe / Female Pipe

Fluid Conveying
SSP Model
Thread PT 1/4-18
L (in) Wt. 1.05 0.14
C1DE82 MF-1/4-45
MF-45 Female Pipe / Male Pipe 45 Elbow

Catalog Part No. SSP Model Thread PT 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 L (in) Wt. 1.09 1.22 1.47 1.59 1.97 0.11 0.19 0.30 0.79 0.75 Price Each
C1DF17 MM-1/4 C1DF18 MM-3/8 C1DF16 MM-1/2 C1GG28 MM-3/4 C1KG31 MM-1
MM Male Pipe / Male Pipe 90 Elbow
1024
Adapters
Catalog Part No. SSP Model Thread PT 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 L (in) Wt. 0.78 1.09 1.22 1.47 1.59 1.97 0.07 0.16 0.22 0.40 0.60 1.07 Price Each
C1HK72 MF-1/8 C1DE81 MF-1/4 C1DE85 MF-3/8 C1DE80 MF-1/2 C1DE84 MF-3/4 C1GF33 MF-1
MF Male Pipe / Female Pipe 90 Elbow
Catalog Part No.
SSP Model
Thread PT 1/8-27 1/4-18 1/2-14 3/4-14
L (in) Wt. 0.66 0.88 0.69 1.36 0.07 0.15 0.34 0.54
Price Each
C1CU45 FF-1/8 C1CU44 FF-1/4 C1CU43 FF-1/2 C1CU46 FF-3/4
FF Female Pipe / Female Pipe 90 Elbow
Fluid Conveying
Catalog Part No.
SSP Model
Thread PT 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2
L (in) Wt. 1.32 1.76 2.04 2.46 2.72 3.26 0.09 0.20 1.50
Price Each
C1CV84 FFF-1/8 C1CV83 FFF-1/4 C1CV86 FFF-3/8 C1CV82 FFF-1/2 C1CV85 FFF-3/4 C1KF80 FFF-1
0.45 0.67 1.32
FFF Female Pipe Tee

SSP Model
Thread PT 1/4-18 3/8-18 1/2-14 3/4-14
L (in) Wt. 1.76 2.04 2.46 2.72 0.20 0.28 0.53 0.74
C1CV87 FFM-1/4 C1CV88 FFM-3/8 C1KF85 C1KF86 FFM-1/2 FFM-3/4
FFM Male Pipe Branch Tee
1025
Adapters

Catalog Part No. SSP Model Thread PT 1/4-18 3/8-18 1/2-14 L (in) Wt. 1.09 1.22 1.47 0.20 0.27 0.46 Price Each
C1CW68 FMF-1/4 C1CW69 FMF-3/8 C1CW67 FMF-1/2
FMF Male Pipe Run Tee

SSP Model
Thread PT 1/2-14
L (in) Wt. 1.23 0.33
C1KF81 FFFF-1/2
FFFF Female Pipe Cross
Fluid Conveying
1026
Adapters
Stainless Steel Pipe to 37 Flare
Catalog Part No. Tube O.D. (in) 0.19 0.25 0.38 0.25 0.38 0.50 0.25 0.38 0.50 0.25 0.38 0.50 0.63 0.75 0.50 0.75 1.00 1.0 1.25 Price Each
SSP Model
Thread PT 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14 1-11-1/2 1-1/4-11-1/2
Thread T 3/8-24 7/16-20 9/16-18 7/16-20 9/16-18 3/4-16 7/16-20 9/16-18 3/4-16 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 3/4-16 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12
L (in) Wt. 1.14 1.58 1.24 1.78 1.90 1.53 1.44 1.91 2.03 1.69 1.69 2.28 2.54 2.06 1.85 2.67 2.11 3.05 2.45 0.03 0.04 0.05 0.07 0.07 0.11 0.10
C1CZ65 J3C C1CZ82 J4C C1DA22 J6-2C C1CZ72 J4-4C C1DA33 J6C C1DA56 J8-4C C1CZ77 J4-6C C1DA25 J6-6C C1DA68 J8C C1CZ79 J4-8C C1DA29 J6-8C C1DA64 J8-8C C1CZ11 J10C C1CZ25 J12-8C C1DA55 J8-12C C1CZ28 J12C C1JE69 J16-12C C1CZ45 J16C C1GM90 J20C
J-C Male 37 Flare / Male Pipe
0.10 0.12 0.18 0.20 0.18 0.19 0.12 0.01 0.31 0.39 0.46 0.68
Fluid Conveying
Catalog Part No.
SSP Model
Tube O.D. (in) 0.25 0.50
Thread PT 1/4-18 1/2-14
Thread T 7/16-20 3/4-16
L (in) Wt. 0.12 2.34 0.29
Price Each
C1CZ71 J4-4BC C1DA63 J8-8BC
BC Male 37 Flare / Male Pipe Bulkhead
Catalog Part No.
SSP Model
Tube O.D. (in) 0.38 0.50
Thread T1 9/16-18 3/4-16
Thread PT 1/4-18 3/8-18
L (in) Wt. 1.54 1.78 0.10 0.15
Price Each
C1FZ98 JS6C C1FZ99 JS8C
JS-C Female 37 Flare / Male Pipe
1027
Adapters

Catalog Part No. Tube O.D. (in) 0.25 0.25 0.38 0.38 0.50 0.50 0.63 0.75 1.0 Price Each
SSP Model
Thread PT 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 1-11-1/2
Thread T 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 1-5/16-12
L (in) Wt. 1.55 1.74 1.87 1.88 2.06 1.75 2.54 2.52 3.1 0.05 0.09 0.10 0.13 0.15 0.27 0.30 0.44 0.67
C1CZ84 J4FC C1CZ73 J4-4FC C1DA35 J6FC C1DA26 J6-6FC C1DA70 J8FC C1DA65 J8-8FC C1CZ12 J10FC C1CZ30 J12FC C1CZ46 J16FC
J-FC Male 37 Flare / Female Pipe
Catalog Part No.
SSP Model
Tube O.D. (in) Thread PT 0.25 0.25 0.38 0.50 0.75 1/8-27 1/8-18 1/4-18 3/8-18 3/4-14
Thread T 7/16-20 7/16-20 9/16-18 3/4-16
M (in)
N (in)
Wt. 0.04 0.07 0.08 0.15 0.25
Price Each
C1CZ91 J4ME-45 C1CZ76 J4-4ME-45 C1DA42 J6ME-45 C1DA77 J8ME-45 C1CZ34 J12ME-45
0.72 0.64 0.82 0.86 0.83 0.86 0.98 0.95
1-1/16-12 1.28 1.20
Fluid Conveying
J-ME-45 Male 37 Flare / Male Pipe 45 Elbow

Catalog Part No. Tube O.D. (in) Thread PT 0.25 0.25 0.38 0.38 0.50 0.63 0.75 0.75 1.0 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 1-11-1/2 M (in) N (in) Price Each
SSP Model
Thread T 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 7/8-14
Wt. 0.05 0.11 0.11 0.19 0.27 0.28 0.50 0.47 0.70
C1CZ90 J4ME C1CZ75 J4-4ME
0.89 0.78 1.05 1.09 1.06 1.09 1.14 1.22 1.33 1.47 1.45 1.47
C1DA41 J6ME C1DA27 J6-6ME C1DA66 J8-8ME C1CZ15 J10ME J-ME Male 37 Flare / Male Pipe 90 Elbow C1EZ30 J12-8ME C1CZ33 J12ME C1CZ49 J16ME
1-1/16-12 1.66 1.59 1-1/16-12 1.66 1.59 1-5/16-12 1.81 1.97
Catalog Part No.
SSP Model
Tube O.D. (in) Thread PT 0.25 0.38 0.50 0.75 1/4-18 1/4-18 3/8-18 3/4-14
Thread T 7/16-20 9/16-18 3/4-16
M (in)
N (in)
Wt. 0.17 0.18 0.25 0.72
Price Each
C1CZ74 J4-4FE C1DA36 J6FE C1DA71 J8FE C1GJ96 J12FE
1.08 0.66 1.23 0.88 1.42 1.02
1-1/16-12 1.89 1.36
J-FE Male 37 Flare / Female Pipe 90 Elbow
1028
Adapters
Catalog Part No. Tube O.D. (in) Thread PT 0.25 0.50 0.75 1.00 1/4-18 1/2-14 3/4-14 1-11-1/2 M (in) N (in) Price Each
SSP Model
Thread T 7/16-20 3/4-16
Wt. 0.50 0.38 1.21 1.60
C1CZ70 J4-4-4TTM C1DA62 J8-8-8TTM C1KG24 C1KG26 J12TTM J16TTM
1.05 1.09 1.33 1.47
1-1/16-12 1.66 1.59 1-5/16-12 1.81 1.97
J-TTM Male 37 Flare / Male Pipe / Male 37 Flare Tee

Catalog Part No. C1KG23 C1KG25 Tube O.D. (in) Thread PT 0.50 0.75 1.00 3/8-18 3/4-14 1-11-1/2 M (in) N (in) Price Each
SSP Model J12TMT J16TMT
Thread T 3/4-16
Wt. 0.26 1.20 1.14
C1DA86 J8TMT
1.25 1.22
1-1/16-12 1.66 1.59 1-5/16-12 1.81 1.97
J-TMT Male 37 Flare / Male 37 Flare / Male Pipe Tee
1029
Adapters
Stainless Steel 37 Flare Union

Catalog Part No. SSP Model Tube O.D. (in) 0.25 0.31 0.38 0.50 0.63 0.75 1.0 Thread T 7/16-20 1/2-20 9/16-18 x 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 L (in) Wt. 1.37 1.37 1.40 1.41 1.62 1.88 2.16 2.25 0.05 0.04 0.06 0.06 0.13 0.15 0.31 0.50 Price Each
C1DA12 J4U C1DA20 J5U C1FQ93 J6-4U
J-U Male 37 Flare Union
C1DA53 J6U C1DA87 J8U C1CZ22 J10U C1CZ41 J12U C1CZ53 J16U
Catalog Part No.
SSP Model
Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75
Thread T 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12
L (in) Wt. 2.07 2.18 2.44 2.74 3.09 0.10 0.14 0.25 0.20 3.00
Price Each
C1CZ81 J4BU C1DA32 J6BU C1DA67 J8BU C1CY99 J10BU
J-BU Male 37 Flare Bulkhead Union
C1CZ27 J12BU
Fluid Conveying
Catalog Part No.
SSP Model
Tube O.D. (in) 0.25 0.25 0.38 0.63 0.38 0.50 0.50 0.75
Thread T 7/16-20 7/16-20 9/16-18 7/16-20 9/16-18 3/4-16 3/4-16 1-1/16-12
L (in) Wt. 0.03 0.04 0.05 0.05 0.05 1.44 1.50 0.10 0.09
Price Each
C1DA23 J6-4TER C1DA57 J8-4TER C1DA61 J8-6TER C1KM62 J10-4TER
J-TER 37 Flare Reducer / Male 37 Flare
C1CY97 J10-6TER C1CY98 J10-8TER C1CZ26 J12-8TER C1CZ43 J16-12TER
Note: Nuts & Sleeves page 894 Tube O.D. (in) 0.25 0.38 0.50
Catalog Part No.
SSP Model
Thread T 7/16-20 9/16-18 3/4-16
Thread T3 7/16-20 9/16-18 3/4-16
A (in)
M (in)
Wt. 0.07 0.11 0.30
Price Each
C1CZ97 J4SE-45 C1DA48 J6SE-45 C1DA83 J8SE-45
0.94 0.72 1.12 0.83 1.28 0.98
J-SE-45 Male 37 Flare / Female 37 Flare Swivel 45 Elbow
1030
Adapters
Catalog Part No. Tube O.D. (in) 0.25 0.38 0.50 M (in) 0.89 1.06 1.25 Price Each
SSP Model
Thread T 7/16-20 9/16-18 3/4-16
Wt. 0.50 0.10 0.19
C1CZ83 J4E C1DA34 J6E C1DA69 J8E
J-E Male 37 Flare / Male 37 Flare 90 Elbow

Catalog Part No. SSP Model Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75 1.00 Thread T 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 Thread T3 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 A (in) 1.0 M (in) 0.89 Wt. 0.08 0.13 0.24 0.35 0.62 0.91 Price Each
C1CZ96 J4SE C1DA47 J6SE C1DA82 J8SE C1CZ19 J10SE C1CZ38 J12SE
1.25 1.01 1.38 1.25 1.62 1.45 1.75 1.66 2.00 1.81
J-SE Male 37 Flare / Female 37 Flare Swivel 90 Elbow
C1FU85 J16SE
Fluid Conveying
Catalog Part No.
SSP Model
Tube O.D. (in) 0.25 0.38 0.50
Thread T 7/16-20 9/16-18 3/4-16
M (in) 0.89 1.06 1.25
Wt. 0.08 0.15 0.28
Price Each
C1CZ99 J4T C1DA50 J6T C1DA85 J8T
J-T Male 37 Flare Tee

Tube O.D. (in) 0.50
Catalog Part No.
SSP Model
Thread T 3/4-16
Thread T3 3/4-16
A (in)
M (in)
Wt. 0.30
Price Each
C1DA81 J8SBT
1.38 1.25
J-SBT Male 37 Flare / Female 37 Flare Swivel / Male 37 Flare Tee
1031
Adapters

Catalog Part No. Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75 A (in) 1.0 M (in) 0.89 Price Each
SSP Model
Thread T 7/16-20 9/16-18 3/4-16 7/8-14 1-1/16-12
Wt. 0.10 0.15 0.30 0.46 0.77
C1CZ98 J4SRT C1DA49 J6SRT C1DA84 J8SRT C1CZ20 J10SRT C1CZ39 J12SRT
1.25 1.06 1.38 1.25 1.62 1.45 1.75 1.66
Fluid Conveying
J-SRT Male 37 Flare / Male 37 Flare / Female 37 Flare Swivel Tee
1032
Adapters
Stainless Steel Straight Thread O-Ring to 37 Flare
Catalog Part No. Tube O.D. (in) 0.25 0.25 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.63 0.75 0.75 1.0 Price Each
SSP Model
Thread T 7/16-20 7/16-20 9/16-18 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12
Thread T4 7/16-20 9/16-18 9/16-18 3/4-16 7/8-14 1-1/16-12 9/16-18 3/4-16 7/8-14 7/8-14 7/8-14 1-1/16-12 1-5/16-12
L (in) Wt. 1.23 1.29 1.30 1.38 1.50 1.75 1.38 1.48 1.60 1.70 1.86 1.97 2.04 0.05 0.08 0.08 0.13 0.18 0.33 0.13
C1CZ86 J4GC C1ZV59 J4-6GC C1DA37 J6GC C1DA30 J6-8GC C1KM63 J6-10GC J-GC Male 37 Flare / Male Straight Thread C1KM65 J6-12GC C1DA58 J8-6GC O-Ring C1DA72 J8GC C1FC54 J8-10GC C1CZ13 J10GC C1EW92 J12-10GC C1CZ31 J12GC C1CZ47 J16GC
0.14 0.20 0.21 0.28 0.34 0.48
Note: SAE O-Ring Boss O-Rings page 1099 Tube O.D. (in) 0.25 0.38
Catalog Part No.
SSP Model
Thread T 7/16-20 9/16-18
Thread T4 7/16-20 9/16-18
G (in)
M (in)
Wt. 0.06 0.10
Price Each
C1CZ88 J4GE-45 C1DA39 J6GE-45
1.05 0.72 1.14 0.83
Fluid Conveying
J-GE-45 Male 37 Flare / Male Straight Thread O-Ring 45 Elbow

Catalog Part No. SSP Model Tube O.D. (in) 0.25 0.25 0.38 0.38 0.50 0.75 Thread T 7/16-20 7/16-20 9/16-18 9/16-18 3/4-16 1-1/16-12 Thread T4 7/16-20 9/16-18 9/16-18 3/4-16 3/4-16 1-1/16-12 G (in) M (in) Wt. 0.07 0.13 0.12 0.23 0.25 0.50 Price Each
C1CZ87 J4GE C1CZ78 J4-6GE C1DA38 J6GE C1DA31 J6-8GE C1DA73 J8GE C1CZ32 J12GE
1.03 0.89 1.25 0.89 1.25 1.06 1.45 1.14 1.45 1.25 1.94 1.66
Note: SAE O-Ring Boss O-Rings page 1099 J-GE Male 37 Flare / Male Straight Thread O-Ring 90 Elbow
1033
Adapters
Stainless Steel Metric to 37 Flare

Catalog Part No. Adaptall Model Thread 1 (in) 7/16-20 7/16-20 9/16-18 3/4-16 Thread 2 (mm) 6 8 10 16 Wt. 0.04 0.05 0.06 0.13 Price Each
C1FP65 SS9200-04-06 C1FP66 SS9200-04-08 C1FP68 SS9200-06-10 C1HG91 SS9200-08-16
SS9200 ** WARNING **: Do NOT use the 7/16-20 thread adapters with Everflex hose end NJIC-4S. Male JIC 37 Flare / Metric Standpipe The adapter flare is shorter than normal and does not make contact properly with the
flare seat on the Everflex hose end.
Fluid Conveying
1034
Adapters
Stainless Steel BSPP to 37 Flare
Catalog Part No. Adaptall Model Thread A (in) 9/16-18 Thread B (BSPP) 1/4-19 Wt. 0.08 Price Each
C1JD17 SS9002-06-04
Note: Complete with washer & o-ring.
SS9002 Male 37 Flare / Male BSPP (British Parallel)
Catalog Part No.
Adaptall Model
Thread 1 (in) 7/16-20
Wt. 0.08
Price Each
C1GA56 SS9240-04-04
SS9240 Male 37 Flare / Female BSPP (British Parallel) Swivel
Catalog Part No.
Adaptall Model
Thread 1 (in) 7/16-20
Wt. 0.17
Price Each
C1GK61 SS9059-04-04
Note: Does not include the SS9500 stainless bonded seal washer.
Fluid Conveying
SS9059 Male 37 Flare / Male BSPP (British Parallel)
1035
Adapters
Stainless Steel Auxiliary Components

SSP Model
Thread T 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14
L (in) Wt. 0.67 0.77 0.81 0.94 1.07 0.03 0.04 0.06 0.11 0.14
C1DA13 J4Z C1DA21 J5Z C1DA54 J6Z
J-Z JIC 37 Flare Cap
C1DA88 J8Z C1CZ23 J10Z
Catalog Part No.
SSP Model
Tube O.D. (in) 0.25 0.38 0.50 0.63
Thread T 7/16-20 9/16-18 3/4-16 7/8-14
L (in) Wt. 0.80 0.84 0.94 1.10 0.03 0.05 0.10 0.15
Price Each
C1CZ93 J4P C1DA44 J6P C1DA79 J8P
J-P JIC 37 Flare Plug
C1CZ17 J10P
Fluid Conveying
Catalog Part No.
SSP Model
Thread T 7/16-20 9/16-18
L (in) Wt. 0.66 0.76 0.03 0.06
Price Each
C1CX84 GP-4 C1CX86 GP-6
GP SAE O-Ring Boss Plug
1036
Adapters
Brass Pipe to Pipe
Catalog Part No. Eaton Model Thread P1 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 3/4-14 Thread P2 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 1/2-14 3/4-14 L (in) Wt. 0.97 1.19 1.38 1.41 1.41 1.81 1.94 0.02 0.05 0.05 0.07 0.08 0.14 0.22 Price Each
C1HP23 3325X2 C1HP25 3325X4X2 C1HP24 3325X4 C1HP27 3325X6X4 C1HP26 3325X6 C1HP28 3325X8 C1HP22 3325X12
3325 Male Pipe Hex Nipple
Catalog Part No.
Model Number
Pipe Thread 1/2-14 1/2-14 3/4-14 1-11-1/2
Pipe Thread 1/4-18 3/8-18 1/2-14 1-11-1/2
L (in) Wt. 1.62 1.62 0.09 0.10 0.16 0.42
Price Each
C1BE84 23325X8X4 C1BE85 23325X8X6 C1BE77 23325X12X8
Male Pipe Hex Nipple
C1FM93 23325X16 NP Models: Nickel Plated. Catalog Part No.
Eaton Model
Thread P1 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14
Thread P2 1/8-27 1/8-27 1/4-18 1/8-27 1/4-18 3/8-18 3/8-18 1/2-14
L (in) Wt. 0.59 0.75 0.69 0.75 0.75 0.75 0.88 0.88 0.02 0.05 0.03 0.09 0.08 0.05 0.15 0.10
Price Each
C1HN97 3220X4X2 C1HN98 3220X6X2 C1HN99 3220X6X4 C1HP11 3220X8X2 C1HP12 3220X8X4 C1HP13 3220X8X6
Fluid Conveying
3220 Male Pipe / Female Pipe Bushing
C1HN95 3220X12X6 C1HN96 3220X12X8
Catalog Part No. C1FS35
Model Number NP28-107
External Pipe Thread 3/8-18 1/2-14 3/4-14 1-11-1/2 1-11-1/2
Internal Pipe Thread 1/4-18 3/8-18 1/4-18 1/2-14 3/4-14
L (in) Wt. 0.04 0.05 0.94 0.94 1.12 0.18 0.30 0.22
Price Each
C1GF47 NP28-104 C1BE57 23232X4
Bushing
C1BE62 23236X8 C1BE60 23236X12 NP Models: Nickel Plated. Catalog Part No.
Eaton Model
Thread P1 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 3/4-14
Thread P2 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14
L (in) Wt. 0.88 1.06 1.25 1.25 1.25 1.47 1.69 0.04 0.07 0.08 0.10 0.11 0.18 0.24
Price Each
C1HN89 3200X2 C1HN91 3200X4X2 C1HN90 3200X4 C1HN93 3200X6X4 C1HN92 3200X6
3200 Male Pipe / Female Pipe
C1HN94 3200X8X6 C1HD73 3200X12X8
1037
Adapters
Brass Pipe to Pipe

Catalog Part No. Model Number External Pipe Thread 1/2-14 Internal Pipe Thread 1/2-14 L (in) Wt. 1.31 0.11 Price Each
C1BE46 23200X8
Female Pipe / Male Pipe

Eaton Model
Thread P 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14
L (in) Wt. 0.57 0.62 0.72 0.78 0.88 0.02 0.03 0.06 0.09 0.13
C1HN84 3152X2 C1HN85 3152X4 C1HN86 3152X6 C1HN87 3152X8 C1HN83 3152X12
3152 Male Pipe Hex Head Plug
Catalog Part No.
Model Number
Pipe Thread 1/8-27 1/4-18 1/2-14 1-11-1/2
L (in) Wt. 0.56 0.62 0.78 0.02 0.03 0.08 0.28
Price Each
C1FK77 NP28-201 C1FK78 NP28-202
Fluid Conveying
C1FK80 NP28-204 C1FQ68 23152X16
Hex Head Pipe Plug
NP Models: Nickel Plated. Catalog Part No. Price Each
Eaton Model
Thread P 1/8-27 1/4-18 3/8-18 1/2-14
L (in) Wt. 0.58 0.74 0.82 0.99 0.02 0.03 0.05 0.09
C1HN79 3151X2
C1HN80 3151X4 C1HN81 3151X6 C1HN82 3151X8
3151 Male Pipe Square Head Plug

Catalog Part No. Eaton Model Male Pipe Thread 1/8-27 Socket Hex (in) 3/16 L (in) Wt. 0.27 0.01 Price Each
C1HN88 3153X2
3153 Hex Socket Pipe Plug
1038
Adapters
Brass Pipe to Pipe
Catalog Part No. Model Number Pipe Thread 1/4-18 3/8-18 1/2-14 3/4-14 L (in) Wt. 0.45 0.45 0.6 0.04 0.05 0.07 0.09 Price Each
C1BE37 23155X4 C1BE38 23155X6 C1BE39 23155X8
Countersunk Hex Pipe Plug
C1BE35 23155X12
Catalog Part No.
Eaton Model
Thread P 1/8-27 1/4-18 3/8-18
L (in) Wt. 0.50 0.59 0.68 0.03 0.04 0.06
Price Each
C1HN74 3129X2 C1HN75 3129X4 C1HN76 3129X6
3129 Pipe Cap

Catalog Part No. Model Number Pipe Thread 1/2-14 L (in) Wt. 0.84 0.15 Price Each
C1BE22 23129X8
Fluid Conveying
Pipe Cap
Eaton Model
Thread P 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14
L (in) Wt. 0.75 1.12 1.12 1.50 1.53 0.03 0.09 0.11 0.19 0.23
C1HP15 3300X2 C1HP16 3300X4 C1HP18 3300X6 C1HP20 3300X8 C1HP14 3300X12

Catalog Part No. Eaton Model Thread P1 1/4-18 3/8-18 1/2-14 Thread P2 1/8-27 1/4-18 3/8-18 L (in) Wt. 0.96 1.16 1.38 0.07 0.12 0.19 Price Each
C1HP17 3300X4X2 C1HP19 3300X6X4 C1HP21 3300X8X6
3300 Female Pipe Reducer Coupling
1039
Adapters
Brass Pipe to Pipe

Catalog Part No. C1BE74 Model Number 23308X4 Internal Pipe Thread 1/2-14 Internal Pipe Thread 1/4-18 L (in) Wt. 1.28 0.10 Price Each
Reducing Pipe Coupling

Catalog Part No. Female Pipe Thread 1/4-18 1/4-18 3/8-18 1/2-14 Price Each
Eaton Model
Thread B 3/4-16 3/4-16 1-14 1-1/8-14
L (in) Wt. 0.94 1.50 1.31 1.50 0.13 0.17 0.28 0.34
C1JC96 1345 C1JC95 1344 C1JC97 1346 C1HC96 1351
Bulkhead Coupling
Model Number
Thread P1 1/2-14
Thread P2 1-1/8-14
L (in) Wt. 0.34
C1HH98 28-304
Fluid Conveying
Bulkhead Coupling
Catalog Part No.
Eaton Model
Male Pipe Thread 1/2-14
Female Pipe Thread 1/4-18
Thread B L (in) Wt. 3/4-16 2.16 0.32
Price Each
C1HY63 1340
Bulkhead Coupling
Catalog Part No. Male Pipe Thread 1/2-14 Female Pipe Thread 1/4-18 Price Each
Eaton Model
Thread B L (in) Wt. 1-14 2.94 0.62
C1HX17 1342
Bulkhead Coupling
1040
Adapters
Brass Pipe to Pipe
Catalog Part No. Eaton Model Thread P1 1/8-27 1/4-18 3/8-18 1/2-14 N Thread P2 (in) 1/8-27 1/4-18 3/8-18 1/2-14 N1 (in) Wt. 0.04 0.09 0.11 0.22 Price Each
0.50 0.38 0.74 0.56 0.78 0.56 1.00 0.76
3350 Male Pipe / Female Pipe 45 Street Elbow

Catalog Part No. Model Number Pipe Thread 1/8-27 M (in) 0.45 Wt. 0.06 Price Each
C1DV84 23355X2
Female Pipe / Female Pipe 45 Elbow

Catalog Part No. C1HP34 Eaton Model 3400X2 Thread P1 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 N Thread P2 (in) 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 N1 (in) Wt. 0.05 0.10 0.15 0.29 0.48 Price Each
Fluid Conveying
0.66 0.47 0.91 0.72 0.97 0.78 1.25 1.03 1.38 1.12
3400 Male Pipe / Female Pipe 90 Street Elbow

Catalog Part No. C1GF50 Model Number NP28-166 External Pipe Thread 1/4-18 Internal Pipe Thread 1/4-18 Type Forged K J (in) (in) Wt. 0.07 Price Each
NP Models: Nickel Plated.
Female Pipe / Male Pipe 90 Elbow

Catalog Part No. X (in) Price Each
Model Number
Pipe Thread 1/8-27 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14
Type
Wt. 0.04 0.06 0.11 0.10 0.27 0.22
C1BE96 23455X2 C1BE97 23455X4 C1BE98 23455X6 C1FS45 NP28-268F NP28-269F
Bar Stock 0.75 Bar Stock 1.03 Bar Stock 1.12 Forged Bar Stock Forged
Male Pipe / Male Pipe 90 Elbow
C1GH36 23455X8 C1FS46 NP Models: Nickel Plated.
1041
Adapters
Brass Pipe to Pipe

Catalog Part No. Eaton Model Thread P1 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 Thread P2 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 N (in) 0.55 0.78 0.84 1.09 1.16 Wt. 0.06 0.13 0.18 0.35 0.61 Price Each
3500 Female Pipe / Female Pipe 90 Elbow Catalog

Part No. Eaton Model Thread P1 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 Thread P2 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 C1HP55 3750X2 C1HP56 3750X4 C1HP57 3750X6 C1HP58 3750X8 C1KK17 3750X12
M (in) 0.55 0.78 0.84 1.09 1.16
Wt. 0.08 0.16 0.20 0.38 0.62
Price Each
3750 Male Pipe / Female Pipe / Female Pipe Tee
Fluid Conveying
Catalog Part No.
Eaton Model
Thread P1 1/8-27 1/4-18 3/8-18
N Thread P2 L (in) (in) 1/8-27 1/4-18 3/8-18 1.10 0.66 1.56 0.91 1.68 0.97
Wt. 0.08 0.16 0.21
Price Each
C1HP46 3600X2 C1HP47 3600X4 C1HP48 3600X6
3600 Female Pipe / Male Pipe / Female Pipe Tee

Catalog Part No. Eaton Model Thread P 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 L (in) Wt. 1.10 1.56 1.68 2.18 2.32 0.08 0.17 0.22 0.43 0.66 Price Each
1042
Adapters
Brass Pipe to Pipe
Catalog Part No. Eaton Model Thread P 1/8-27 1/4-18 3/8-18 1/2-14 M (in) 0.50 0.75 0.81 1.09 Wt. 0.06 0.20 0.31 0.52 Price Each
3950 Female Pipe Cross
1043
Adapters
Brass Pipe to 37 Flare

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.38 0.38 0.50 0.38 0.50 0.63 0.75 0.75 1.0 1.0 1.25 A (in) 1.42 1.43 1.43 1.53 1.69 1.79 1.89 2.06 2.06 2.11 2.30 2.45 Price Each
Thread P 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 1-11-1/2 1-1/4-11-1/2
Thread T 7/16-20 9/16-18 9/16-18 3/4-16 9/16-18 3/4-16 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12 1-5/8-12
Wt. 0.06 0.07 0.09 0.12 0.14 0.19 0.20 0.30 0.29 0.39 0.48 0.68
C1AV11 2021-4-4B C1AV15 2021-4-6B C1AV23 2021-6-6B C1AV25 2021-6-8B
C1AV32 2021-8-6B C1AV34 2021-8-8B C1AV27 2021-8-10B C1AV29 2021-8-12B C1AU75 2021-12-12B C1AU77 2021-12-16B C1AU83 2021-16-16B C1FA52 2021-20-20B NP Models: Nickel Plated
Catalog Part No.
Thread P 3/4-14
Thread T
A (in)
B (in)
Wt. 0.35
Price Each
C1DV49 2023-12-12B
1-1/16-12 1.20 1.28
Fluid Conveying
2023 Male Pipe / Male 37 Flare 45 Elbow
Catalog Part No.
Tube O.D. Aeroquip Model (in) 0.25 0.38 0.38 0.50 0.38 0.50 0.75 1.0
Thread P 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 1-11-1/2
Thread T 7/16-20 9/16-18 9/16-18 3/4-16 9/16-18 3/4-16
A (in)
B (in)
Wt. 0.11 0.10 0.16 0.18 0.30 0.25 0.50 0.68
Price Each
C1AW20 2024-4-4B C1AW23 2024-4-6B C1AW30 2024-6-6B C1AW32 2024-6-8B C1AW37 2024-8-6B C1AW39 2024-8-8B C1AV87 2024-12-12B C1AV93 2024-16-16B 2024 Male Pipe / Male 37 Flare 90 Elbow
1.09 1.05 1.09 1.06 1.22 1.14 1.22 1.25 1.47 1.13 1.47 1.33
1-1/16-12 1.59 1.66 1-5/16-12 1.97 1.81
1044
Adapters
Catalog Part No. Tube O.D. (in) 0.19 0.25 0.31 0.38 0.25 0.31 0.38 0.50 0.38 0.50 0.63 0.38 0.50 0.63 0.75 0.75 Price Each
Eaton Model
Thread P 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14
Thread T 3/8-24 7/16-20 1/2-20 5/8-18 7/16-20 1/2-20 5/8-18 3/4-16 5/8-18 3/4-16 7/8-14 5/8-18 3/4-16 7/8-14 1-1/16-14 1-1/16-14
L (in) Wt. 1.00 1.06 1.16 1.25 1.26 1.34 1.44 1.62 1.44 1.62 1.81 1.69 1.81 2.00 2.18 2.18 0.03 0.03 0.04 0.06 0.04 0.06 0.08
C1HQ17 48X3 C1HQ18 48X4 C1HQ20 48X5 C1HQ23 48X6X2 C1HQ19 48X4X4 C1HQ21 48X5X4 C1HQ22 48X6 C1HQ27 48X8X4 C1HQ24 48X6X6 C1HQ26 48X8 C1HQ13 48X10X6 C1HQ25 48X6X8 C1HQ28 48X8X8 C1HQ12 48X10 C1HQ14 48X12 C1HQ15 48X12X12
48 Male 45 Flare / Male Pipe
0.10 0.10 0.11 0.17 0.18 0.18 0.19 0.29 0.33
Catalog Part No.
Model Number
Tube O.D. (in) 0.25 0.25 0.38 0.38 0.25 0.31 0.38 0.50 0.50 0.50 0.63 0.50 0.63 0.75
Fluid Conveying
Thread P 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 3/4-14 3/4-14 3/4-14
Thread T 7/16-20 7/16-20 5/8-18 5/8-18 7/16-20 1/2-20 5/8-18 3/4-16 3/4-16 3/4-16 7/8-14 3/4-16 7/8-14 1-1/16-14
A (in) 1.06 1.12 1.44 1.31 1.25 1.38 1.38 1.56 1.81 1.80 1.75 1.88 2.05
Wt. 0.03 0.04 0.07 0.09 0.06 0.07 0.11 0.06 0.15 0.13 0.07 0.18 0.19 0.23
Price Each
C1FH17 NPACR-10-255 C1FH18 NPACR-10-256 C1AU23 2000-4-6B C1FH19 NPACR-10-263
248 / 2000 Male Pipe / Male 45 Flare
C1BG39 248X4X6 C1BG43 248X5X6 C1FH20 NPACR-10-264 C1FH21 NPACR-10-268 C1AU27 2000-8-8B C1FS16 NP10-269 C1FH23 NPACR-10-273 C1BG49 248X8X12 C1BG31 248X10X12 C1FK76 NP10-276
NP Models: Nickel Plated. Note: 2000 is Aeroquip model. Tube O.D. (in) 0.25 0.31 0.25 0.38 0.38 0.50
Catalog Part No.
Eaton Model
Thread P 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18
Thread T 7/16-20 1/2-20 7/16-20 5/8-18 5/8-18 3/4-16
L (in) Wt. 1.03 1.06 1.25 1.31 1.38 1.50 0.04 0.01 0.06 0.08 0.10 0.11
Price Each
C1HP95 46X4 C1HP97 46X5 C1HP96 46X4X4 C1HP98 46X6 C1HP99 46X6X6
46 Male 45 Flare / Female Pipe
C1HQ11 46X8
1045
Adapters

Catalog Part No. Tube O.D. (in) 0.19 0.31 0.50 0.63 A (in) 0.97 1.28 1.44 1.62 Price Each
Model Number
Thread P 1/8-27 1/4-18 1/2-14 1/2-14
Thread T 3/8-24 1/2-20 3/4-16 7/8-14
Wt. 0.01 0.04 0.09 0.16
C1BG20 246X3 C1BG24 246X5X4 C1BG29 246X8X8 C1FE71 246X10
246 / 2001 Female Pipe / Male 45 Flare
NP Models: Nickel Plated. Note: 2001 is Aeroquip model.
Catalog Part No. C1HQ56
Eaton Model 54X6
Tube O.D. (in) 0.25 0.38 0.50 0.50 0.63
Thread P 1/8-27 1/4-18 3/8-18 1/2-14 1/2-14
Thread T 7/16-20 5/8-18 3/4-16 3/4-16 7/8-14
M (in)
N (in)
Wt. 0.04 0.11 0.17 0.23 0.26
Price Each
C1HQ54 54X4 C1HQ57 54X8 C1HQ58 54X8X8 C1HQ53 54X10
0.67 0.64 0.89 0.86 1.06 0.95 1.12 1.17 1.23 1.17
Fluid Conveying
54 Male 45 Flare / Male Pipe 45 Elbow
Catalog Part No.
Model Number
Tube O.D. (in) 0.38 0.63 0.75
Thread P 3/8-18 1/2-14 3/4-14
Thread T 5/8-18 7/8-14 1-1/16-14
A (in)
B (in)
Wt. 0.11 0.18 0.30
Price Each
C1BH24 254X6X6 C1FG96 NP10-457F
0.78 0.88 1.19 1.16
C1FJ99
254X12X12
NP Models: Nickel Plated. F Models: Models with F on end are Forged.
254 / 2007 Male Pipe / Male 45 Flare 45 Elbow
Catalog Part No.
Eaton Model
Tube O.D. (in) 0.19 0.25 0.31 0.38 0.25 0.31 0.38
Thread P 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18
Thread T 3/8-24 7/16-20 1/2-20 5/8-18 7/16-20 1/2-20 5/8-18
M (in)
N (in)
Wt. 0.05 0.05 0.06 0.11 0.07 0.08 0.11
Price Each
C1HQ33 49X3 C1HQ34 49X4 C1HQ37 49X5 C1HQ40 49X6X2 C1HQ35 49X4X4 C1HQ38 49X5X4
0.75 0.75 0.81 0.76 0.91 0.78 1.03 0.91 0.88 0.94 0.95 0.92 0.97 1.06
49 Male 45 Flare / Male Pipe 90 Elbow
C1HQ39
49X6
1046
Adapters
Catalog Part No. Tube O.D. (in) 0.50 0.25 0.38 0.50 0.63 0.38 0.50 0.63 0.75 0.75 M (in) N (in) Price Each
Eaton Model
Thread P 1/4-18 3/8-18 3/8-18 3/8-18 3/8-18 1/2-14 1/2-14 1/2-14 1/2-14 3/4-14
Thread T 3/4-16 7/16-20 5/8-18 3/4-16 7/8-14 5/8-18 3/4-16 7/8-14
Wt. 0.16 0.13 0.14 0.19 0.33 0.24 0.27
C1HQ44 49X8X4 C1HQ36 49X4X6 C1HQ41 49X6X6 C1HQ43 49X8 C1HQ30 49X10X6 C1HQ42 49X6X8 C1HQ45 49X8X8 49 Male 45 Flare / Male Pipe 90 Elbow C1HQ29 49X10 C1HQ31 49X12 C1HQ32 49X12X12
1.22 1.19 0.94 1.03 1.06 1.09 1.22 1.12 1.41 1.23 1.16 1.28 1.26 1.36 1.41 1.38
0.28 0.45 0.56
1-1/16-14 1.62 1.50 1-1/16-14 1.59 1.62
Catalog Part No.
Model Number
Tube O.D. (in) 0.25 0.38 0.38 0.38 0.50 0.25 0.50 0.63
Thread P 1/8-27 1/4-18 3/8-18 3/8-18 3/8-18 1/2-14 3/4-14 3/4-14
Thread T 7/16-20 5/8-18 1/2-20 5/8-18 3/4-16 7/16-20 3/4-16 7/8-14
A (in) 0.88
B (in) 1.0
Wt. 0.04 0.09 0.08 0.08 0.14 0.10 0.21 0.23
Price Each
C1FG86 NP10-286F C1FG88 NP10-294F C1FQ69 249X5X6 C1FG89 NP10-295F C1FG90 NP10-299F C1BG61 249X4X8 C1BG69 249X8X12 249 / 2003 Male Pipe / Male 45 Flare 90 Elbow C1BG53 249X10X12
0.78 0.81
1.09 1.06 1.12 1.22
Fluid Conveying
NP Models: Nickel Plated. Note: Models with F on end are Forged. Note: 2003 is Aeroquip model. Tube O.D. (in) 0.25 0.25 0.38
Catalog Part No.
Eaton Model
Thread P 1/8-27 1/4-18 1/4-18
Thread T 7/16-20 7/16-20 5/8-18
M (in)
N (in)
Wt. 0.06 0.11 0.15
Price Each
C1HQ48 50X4 C1HQ49 50X4X4 C1HQ50 50X6
0.88 0.47 0.97 0.66 1.09 0.69
50 Male 45 Flare / Female Pipe 90 Elbow
Catalog Part No.
Model Number
Tube O.D. (in) 0.50
Pipe Thread 1/2-14
Tube Thread 3/4-16
M (in)
N (in)
Wt. 0.15
Price Each
C1FE75 250X8X8 250 Female Pipe / Male 45 Flare 90 Elbow
1047
Adapters

Catalog Part No. Tube O.D. (in) 0.25 M (in) N (in) Price Each
Eaton Model
Thread P 1/8-27
Thread T 7/16-20
Wt. 0.07
C1HP94 45X4
0.81 0.78
45 Male 45 Flare / Male Pipe / Male 45 Flare Tee

Catalog Part No. Model Number Tube O.D. (in) 0.38 Pipe Thread 1/4-18 Tube Thread 5/8-18 M (in) 1.0 N (in) 1.06 Wt. 0.11 Price Each
C1BG15 245X6
245 Male 45 Flare / Male Pipe / Male 45 Flare Tee

Catalog Part No. Model Number Tube O.D. (in) 0.38 Pipe Thread 1/4-18 Tube Thread 5/8-18 M (in) N (in) Wt. 0.10 Price Each
Fluid Conveying
C1BH13 251X6
251 Male 45 Flare / Male 45 Flare / Male Pipe Tee
1048
Adapters
Brass 45 Flare Union
Catalog Part No. Eaton Model Tube O.D. (in) 0.25 0.31 0.38 0.50 0.63 0.75 L (in) Wt. 0.53 0.62 0.69 0.84 0.97 1.09 0.02 0.04 0.05 0.06 0.10 0.18 Price Each
C1HP77 40X4 C1HP78 40X5 C1HP79 40X6 C1HP80 40X8 C1HP75 40X10 C1HP76 40X12
40 45 Flare Cap
Eaton Model
Tube O.D. (in) 0.25 0.38 0.50 0.63 0.75
L (in) Wt. 0.69 0.88 1.06 1.19 1.31 0.02 0.06 0.09 0.13 0.22
39 45 Flare Plug
Catalog Part No. Tube O.D. (in) 0.31 Price Each
Fluid Conveying
Model Number
Thread T 1/2-20
L (in) Wt. 0.03
C1BC95 2229X5
2229 45 Flare Plug

Tube O.D. (in) 0.38 0.63
Catalog Part No.
Model Number
Thread T 5/8-18 7/8-14
L (in) Wt. 1.50 2.0 0.15 0.20
Price Each
C1AK46 1350X6 C1AK45 1350X10
1350 Female 45 Flare Union

Tube Tube O.D. O.D. (in) Thread T1 (in) 1/4 5/16 3/8 1/2 5/8 7/16-20 1/2-20 5/8-18 3/4-16 7/8-14 1/4 5/16 3/8 1/2 5/8
Catalog Part No.
Eaton Model
Thread T2 7/16-20 1/2-20 5/8-18 3/4-16 7/8-14
L (in) 1.19 1.34 1.50 1.81 2.12
Wt. 0.03 0.05 0.09 0.14 0.21
Price Each
42 Male 45 Flare Union
1049
Adapters

Catalog Part No. Tube O.D. (in) 0.31 0.38 0.38 0.50 0.75 0.75 Tube Thread 1/2-20 5/8-18 5/8-18 3/4-16 1-1/16-14 1-1/16-14 Tube O.D. 0.25 0.25 0.31 0.38 0.63 Tube Thread 7/16-20 7/16-20 1/2-20 5/8-18 7/8-14 2.44 1.69 Price Each
Model Number
L (in) 1.28 1.38
Wt. 0.04 0.06 0.07 0.12 0.30 0.35
C1ZY79 242X5X4 C1EN22 242X6X4 C1EX64 242X6X5 C1BF92 242X8X6 C1ZU15 242X12X10 C1BF86 242X12
242 Male 45 Flare Union
1-1/16-1 0.75 4
Catalog Part No.
Model Number
Tube Tube O.D. (in) Thread B1 O.D. Thread B L (in) Wt. 0.25 0.38 0.50 7/16-20 5/8-18 3/4-16 0.38 0.50 0.38 5/8-18 3/4-16 5/8-18 1.12 1.41 1.44 0.07 0.12 0.20
Price Each
C1BD87 2274X6 C1BD89 2276X8 C1BD90 2278X6
Catalog Part No.
Model Number
Tube O.D. (in) 0.38
Tube O.D. 0.38
Wt. 0.17
Price Each
C1CH40 A800-3/8X3/8
Fluid Conveying
A800 Female 45 Flare Swivel / Male 45 Flare 90 Elbow

Catalog Part No. Eaton Model
Tube O.D. (in) 0.50
Thread 3/4-16
M (in) 1.20
Wt. 0.23
Price Each
C1HQ60 55X8
55 Male 45 Flare / Male 45 Flare 90 Elbow

Catalog Part No. Model Number Tube O.D. (in) 0.38 Thread 5/8-18 M (in) 1.06 Wt. 0.08 Price Each
C1BH39 255X6
255 Male 45 Flare / Male 45 Elbow 90 Elbow
1050
Adapters
Catalog Part No. Tube O.D. (in) 0.25 0.50 M (in) 0.86 1.20 Price Each
Eaton Model
Thread 7/16-24 3/4-16
Wt. 0.08 0.26
C1HP92 44X4 C1HP93 44X8

Catalog Part No. Tube O.D. B Tube Tube M (in) O.D. B1 O.D. B2 (in) 0.31 0.38 0.38 0.50 0.31 0.38 0.38 0.50 0.31 0.38 0.38 0.50 M1 (in) M2 (in) Price Each
Model Number
Wt. 0.09 0.13 0.13 0.27
C1BG11 244X5 C1BG12 244X6 C1FQ95 NP10-161F
0.91 0.91 0.91 1.06 1.06 1.06
C1FK84 NPACR10-162F
NP Models: Nickel Plated. F Models: Models with F on end are Forged.
1051
Adapters
Brass 42 Inverted Flare to 45 Male Flare

Catalog Part No. Tube O.D. Aeroquip Model (in) 0.25 0.25 0.38 0.38 0.38 0.50 0.63 A (in) 1.09 1.10 1.25 1.28 1.43 1.56 1.76 Price Each
Thread T1 7/16-24 1/2-20 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18
Thread T2 7/16-20 7/16-20 5/8-18 5/8-18 5/8-18 3/4-16 7/8-14
Wt. 0.03 0.03 0.07 0.08 0.10 0.13 0.17
C1AU29 200001-4-4B C1AU31 200001-5-4B C1AU32 200001-5-6B C1AU33 200001-6-6B C1AU34 200001-7-6B 200001 Male 42 Inverted Flare / Male 45 Flare C1AU35 200001-8-8B C1AU28 200001-10-10B
Fluid Conveying
1052
Adapters
Brass 42 Inverted Flare to Pipe
Catalog Part No. Tube O.D. (in) 3/16 1/4 5/16 0.25 0.31 3/8 1/2 Price Each
Eaton Model
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 3/8-18 3/8-18
L (in) Wt. 0.70 0.74 0.79 0.89 0.98 1.01 1.07 0.02 0.02 0.03 0.04 0.05 0.08 0.09
C1HN58 202X3 C1HN59 202X4 C1HN60 202X5 C1HD39 202X4X4 C1HH75 202X5X4 C1HN61 202X6X6 C1HN62 202X8 202 Male Pipe / Female 42 Inverted Flare
Catalog Part No.
Model Number
Tube O.D. (in) 0.38
Pipe Thread 1/4-18
L (in) Wt. 1.02 0.06
Price Each
C1EN16 2200X6
2200 Male Pipe / Female 42 Inverted Flare
Catalog Part No.
Model Number
Tube O.D. (in) 0.38
Pipe Thread 1/8-27
L (in) Wt. 0.88 0.01
Price Each
Fluid Conveying
C1BC99 2232X6
2202 Male Pipe / Female 42 Inverted Flare (Heavy Series)
Catalog Part No.
Eaton Model
Tube O.D. 1/4
Thread P 1/8-27
L (in) Wt. 0.75 0.03
Price Each
C1HD51 252X4
252 Female Pipe / Female 42 Inverted Flare
1053
Adapters
Brass 42 Inverted Flare to Pipe

Catalog Part No. Tube O.D. (in) 1/4 3/8 M L (in) (in) 0.94 0.27 1.34 0.41 Price Each
Eaton Model
Thread P 1/8-27 1/4-18
Wt. 0.03 0.08
C1HP43 352X4 C1HP45 352X6
352 Male Pipe / Female 42 Inverted Flare 45 Elbow

Catalog Part No. Tube O.D. (in) 0.50 M (in) N (in) Price Each
Model Number
Pipe Thread .375
Wt. 0.20
C1BF17 2352X8
0.38 0.91
2352 Female 42 Inverted Flare / Male Pipe 45 Elbow

Tube O.D. (in) 3/16 1/4 5/16 1/4 0.31 3/8 3/8 1/2 1/2
Fluid Conveying
Catalog Part No.
Eaton Model
Thread P 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14
M L (in) (in) 0.85 0.27 0.92 0.33 0.98 0.47 1.09 0.28 0.45 1.32 0.53 1.32 0.50 1.48 0.59 1.67 0.66
Wt. 0.03 0.04 0.05 0.06 0.07 0.10 0.12 0.16 0.25
Price Each
C1HP68 402X3 C1HP69 402X4 C1HP70 402X5 C1HJ22 402x4x4 C1HD85 402X5X4 C1HP71 402X6 C1HP72 402X6X6 402 Female 42 Inverted Flare / Male Pipe C1HP73 402X8 C1HP74 402X8X8 90 Elbow
Catalog Part No.
Model Number
Tube O.D. (in) 0.63
Pipe Thread 1/2-14
M (in)
N (in)
Wt. 0.15
Price Each
C1ZY80 2402X10
2402 Female 42 Inverted Flare / Male Pipe 90 Elbow (Heavy Series)
1054
Adapters
Brass 42 Inverted Flare Unions & Accessories
Catalog Part No. Eaton Model Tube O.D. (in) 1/4 5/16 3/8 L (in) Wt. 0.62 0.70 0.80 0.02 0.03 0.07 Price Each
C1HD71 302X4 C1HN73 302X5 C1HD72 302X6
302 Female 42 Inverted Flare Union

Catalog Part No. Eaton Model Tube O.D. (in) 3/16 1/4 5/16 3/8 L (in) Wt. 0.53 0.54 0.59 0.66 1.00 0.02 0.02 0.04 Price Each
C1HM67 131X3 C1HM68 131X4 C1HM69 131X5 C1HM70 131X6
131 Male 42 Inverted Flare Plug (Steel)

Catalog Part No. Model Number Male Thread 7/16-24 Female Thread 3/16 Wt. 0.03 Price Each
Fluid Conveying
C1FK27 7818
7818 Male x Female 42 Inverted Flare

Catalog Part No. C1JM63 702X3 C1HE19 702X4 Tube M O.D. L (in) (in) 3/16 1.09 0.39 1/4 1.13 0.42 Price Each
Eaton Model
Wt. 0.05 0.05
702 Female 42 Inverted Flare Union Tee
1055
Adapters
Brass Garden Hose Adapters

Catalog Part No. C1BC39 Model Number 21517X12X8 Straight Thread 3/4-11-1/2 3/4-11-1/2 Pipe Thread 1/2-14 3/4-16 Wt. 0.13 0.13 Price Each
C1ZY86 21517X12X12
21517 Female Pipe / Female Hose Swivel
Catalog Part No.
Model Number
Straight Thread 3/4-11-1/2
External Pipe Thread 3/4-14
Internal Pipe Thread 1/2-14
L (in) Wt. 1.31 0.16
Price Each
C1FE68 21502X12X12X8
21502 Male Hose / Male & Female Pipe
Fluid Conveying
Catalog Part No.
Model Number
Straight Thread 3/4-11-1/2
Wt. 0.06
Price Each
C1EN15 21518X12
21518 Hose Cap
1056
Quick Disconnects
Category Air Aeroquip FD40 Series / Swing Couplings - MIL-C-4109 Industrial Interchange . . . . . . . . . . . . . . . . . . . . . Aeroquip FD43 Series - MIL-C-4109 Industrial Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Miscellaneous Air Quick-Disconnects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fluid Transfer & Hydraulic Aeroquip 5100 Series - Connect Under Pressure - Low Spill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip 5600 Series - General Purpose - ISO 7241/1 Series A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip FD45 Series - Steel - ISO 7241/1 Series B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip FD45 Series - Brass - ISO 7241/1 Series B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip FD45 Series - Stainless Steel - ISO 7241/1 Series B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip FD89 Series - ISO 16028 Interchange - HTMA Flush Face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fluid Transfer & Refrigerant Aeroquip 5400 Series - Low Air Inclusion - Low Fluid Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Farm Aeroquip FD72 Series - Push to Connect - Connect Under Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip FD76 Series - Male Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Special Application Aeroquip FD14 Series - Oil Drain Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip FD69 Series - High Pressure / Water Blast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aeroquip FD90 Series - Diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Hydraulic Power & Control 1058 1063 1064 1066 1068 1072 1074 1075 1076 1078 1079 1080 1081 1082 1083
1057
Quick Disconnects
Air FD40 Series - MIL-C-4109 Industrial Interchange
The FD40 Series offers a one-hand push-to-connect latch ideal for compressed air service. The female half features a self-sealing valve, preventing air loss while disconnected. The male half uses a straight through design. Aeroquip Coupling Features: Automatic sleeve for one-hand push-to connect operation Protective collar to prevent accidental snagging and disconnection Meets dimensional requirements of MIL-C-4109 for industrial interchangeability Swivels 360, eliminating hose kinking Pin latching mechanism Standard seal material - Buna N Standard body material - Brass. Oetiker Swing Coupling Features: Interchanges with Aeroquip FD40 Series Safe automatic venting of trapped air when disconnecting Meets dimensional requirements of MIL-C-4109 for industrial interchangeability To connect, insert male half into coupling in angled position. Swing the halves to a straight position To disconnect, retract release sleeve, swing assembly to angled position Swivels 360, eliminating hose kinking Designed to assure high flow with low pressure drop for peak tool performance Standard seal material Buna-N Standard body material - Zinc and nickel plated steel. Milton Coupling Features: Ideal for use when male half type is not known Accepts male halves from Aeroquip FD40 Series, Aeroquip FD41Series (Aro 210), Tru-Flate and Parker (Automotive) Rust resistant - made of heavy duty brass Push Type - Body engages automatically Drag Guard - virtually eliminates accidental disconnection. Maximum Operating Pressure: Aeroquip Models 300 PSI. Oetiker Models 360 PSI. Milton Models 300 PSI. Dixon Models 300 PSI. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No.
Aeroquip Model
Coupling Size -04
Thread Size 1/4-18
Seal Material Buna-N
A (in)
B (in)
Wt. 0.29
Price Each
C1JC76 FD40-1054-04-04
2.17 1.19
FD40-1054 Female Half Female Pipe - Valved
1058
Quick Disconnects

Catalog Part No. Oetiker Model Coupling Size -04 -06 -08 Thread Size 1/4-18 3/8-18 1/2-14 Seal Material Buna-N Buna-N Buna-N A (in) B (in) Wt. 0.23 0.31 0.93 Price Each
C1ZY90 20500311 C1ZY94 20500026 C1FF61 20500110
2.54 0.79 2.79 0.94 3.31 1.38
Oetiker Swing Coupling Female Half - Safety Vent Female Pipe - Valved
Catalog Part No. C1FL21 Oetiker Model 20500318 Coupling Size -04 -04 Thread Size 1/4-18 3/8-18 Seal Material Buna-N Buna-N A (in) B (in) Wt. 0.22 0.24 Price Each
C1ZY89 20500317
2.66 0.79 2.66 0.79
Oetiker Swing Coupling Female Half - Safety Vent Male Pipe - Valved
Catalog Part No. C1FF81 745 Milton Model Coupling Size -04 Thread Size 1/4-18 Seal Material Buna-N A (in) B (in) Wt. 0.25 Price Each
2.13 1.00
Fluid Conveying
Milton Multi-Series Coupling Female Half - Valved Female Pipe - Brass

Catalog Part No. Dixon Model Coupling Size -04 -04 Hose Size 1/4 3/8 Seal Material Buna-N Buna-N Wt. 0.18 0.19 Price Each
C1FQ13 DC2042
Dixon Hose Shank Female Half - Valved Hose Clamp Required
C1FQ14 DC2044
Catalog Part No. C1CT58
Aeroquip Model FD40-1013-06-06
Coupling Size -06
Thread Size (P) 3/8-18
A (in) 1.90
Wt. 0.15
Price Each
FD40-1013 Male Half Female Pipe - Non-Valved
1059
Quick Disconnects
Catalog Part No. C1CT60 C1FJ24 C1CT61 Aeroquip Model FD40-1014-04-04 DCP2502 FD40-1014-06-06 FD40-1014-08-08 25500278 Coupling Size -04 -04 -06 -08 -08 Thread Size (P) 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 1.88 2.44 A (in) 1.75 Wt. 0.06 0.08 0.07 0.15 0.18 Price Each
FD40-1014 Male Half Male Pipe - Non-Valved
C1CT62 C1FV64
Note: DCP2502 is Dixon model, 25500278 is Oetiker model.
Catalog Part No.
Dixon Model
Coupling Size -04
Hose Size 3/8
Wt. 0.05
Price Each
C1FQ20 DCP2144
Dixon Hose Shank Male Half Hose Clamp Required
1060
Quick Disconnects
Air FD41 Series - Aro 210 Interchange

The FD41 interchanges with the Aro 210 Series for compressed air service, with a self-sealing female half and straight through male half. Aeroquip Coupling Features: Designed to interchange with Aro 210 Series Meets dimensional requirements of ISO Standard 4414 Automatic sleeve for one hand push-to-connect operation Swivels 360, eliminating hose kinking Designed to assure high flow with low pressure drop for peak tool performance Standard seal material - Buna-N Standard body materials - Zinc plated steel. Oetiker Swing Coupling Features: Interchanges with Aeroquip FD41 and Aro 210 Series Meets dimensional requirements of ISO Standard 4414 Safe automatic venting of trapped air when disconnecting To connect, insert male half into coupling in angled position. Swing the halves to a straight position To disconnect, retract release sleeve, swing assembly to angled position Swivels 360, eliminating hose kinking Designed to assure high flow with low pressure drop for peak tool performance Standard seal material - Buna-N Standard body material - Zinc and nickel plated steel. Milton Coupling Features: Ideal for use when male half type is not known Accepts male halves from Aeroquip FD40 Series, Aeroquip FD41Series (Aro 210), Tru-Flate and Parker (Automotive) Rust resistant - made of heavy duty brass Push Type - Body engages automatically Drag Guard - virtually eliminates accidental disconnection. Maximum Operating Pressure: Aeroquip Models size -04 2000 PSI, size -06 1000 PSI, size -08 500 PSI. Oetiker Models 360 PSI. Aro Models 250 PSI. Milton Models 300 PSI. Dixon Models 300 PSI. Note: Aeroquip models are also rated at 28 in/Hg vacuum when connected.
Fluid Conveying
1061
Quick Disconnects
Air FD41 Series - Aro 210 Interchange
Catalog Part No. Oetiker Model Coupling Size -04 Thread Size 1/4-18 Seal Material Buna-N A (in) B (in) Wt. 0.23 Price Each
C1ZY92 20500291
2.54 0.78
Oetiker Swing Coupling Female Half - Safety Vent Female Pipe - Valved
Catalog Part No. C1FF81 745 Milton Model Coupling Size -04 Thread Size 1/4-18 Seal Material Buna-N A (in) B (in) Wt. 0.25 Price Each
2.13 1.00
Milton Multi-Series Coupling Female Half - Valved Female Pipe - Brass

Catalog Part No. C1CT64 Aeroquip Model FD41-1013-04-04 Coupling Size -04 Thread Size (P) 1/4-18 A (in) 1.51 Wt. 0.04 Price Each
Fluid Conveying
FD41-1013 Male Half Female Pipe - Non-Valved
1062
Quick Disconnects
Air FD43 Series - Industrial Interchange

The FD43 Series is a manual retract-type ball latch industrial interchange coupling. Ideal for compressed air service, the FD43 uses FD40 male tips. Features: Meets dimensional requirements of MIL-C-4109 specifications for industrial interchangeability Protective collar to prevent accidental snagging and disconnection Manual retract latch design allows quick and easy connection of hose lines Swivels 360, eliminating hose kinking Designed to assure high flow with low pressure drop for peak tool performance Standard seal material - Neoprene Standard body material Zinc plated steel.
Fluid Conveying
Catalog Part No.
Aeroquip Model
Coupling Thread Size Size (P) -04 1/4-18
Seal Material Neoprene
A (in)
B (in)
Wt. 0.20
Price Each
C1CT66 FD43-1001-04-04
2.09 0.88
Male Halves: FD40 Series Male Halves page 1059
1063
Quick Disconnects
Air - Miscellaneous
Dixon "Air Chief" Automotive Quick-Connect Fittings

Features: Semi-Automatic pull sleeve to connect Flow Rating 1/4 Inch Size Models: 37 CFM @ 100 PSI Flow Rating 3/8 Inch Size Models: 70 CFM @ 100 PSI 300 PSI Maximum Operating Pressure -40F to 250F Operating Temperature Range Dixon "Air Chief" Automotive Quick-Connect Fittings
Catalog Part No. C1FJ23 Dixon Model DC6 Coupling Size 1/4 3/8 3/8 Half Thread Material Wt. 0.19 0.30 0.09 Steel Steel Price Each
C1GB63 DC2 C1FK36 DCP7
Female 1/4 Female NPT Brass Female 3/8 Female NPT Male 1/4 Male NPT
Dixon "Dix-Lock" Quick Acting Couplings

Features: QBM2 Buna-N gasket is a separately purchased item Dix-Lock couplings are rated to 300 PSI, and require a minimum of 5 PSI to get a positive seal Dixon "Dix-Lock" Quick Acting Couplings
Catalog Part No. Dixon Model Material Description Wt. 0.70 0.30 0.31 Price Each
Fluid Conveying
C1FU99 QM83 C1FU98 QM103 C1GG93 QM102
Plated Steel Male Head x Female 3/4 NPT Plated Steel Female Head x Female 3/4 NPT Plated Steel Female Head x Female 1/2 NPT
Note: QBM2 Buna-N gasket is a separately purchased item.
Milton G Style 1/2 Inch Air Couplers

Features: 1/2 Inch Basic Size Industrial Interchange Series Female halves are heavy duty steel Male halves are case hardened steel Treated to resist rust 300 PSI Maximum Operating Pressure Buna-N seals Milton G Style 1/2 Inch Air Couplers
Catalog Part No. C1FJ65 C1FJ64 C1FJ68 C1FJ67 Milton Model 1816 1815 1858 1857 Coupling Size 1/2 1/2 1/2 1/2 Half Female Female Male Male Thread 1/2 Male NPT 1/2 Female NPT 1/2 Female NPT 1/2 Male NPT Wt. 0.46 0.46 0.19 0.17 Price Each
1064
Quick Disconnects
Air - Miscellaneous
Milton P Style 3/8 Inch Air Couplers

Features: 3/8 Inch Basic Size Tru-Flate/Parker Style Interchange Series Female halves are heavy duty steel Male halves are case hardened steel and treated to resist rust 300 PSI Maximum Operating Pressure Buna-N seals. Milton P Style 3/8 Inch Air Couplers
Catalog Part No. Milton Model Coupling Size 3/8 Half Female Thread 1/4 Female NPT Wt. 0.30 Price Each
C1HY72 1803
Fluid Conveying
1065
Quick Disconnects
Fluid Transfer & Hydraulic 5100 Series - Low Spill Connect Under Pressure
The 5100 Series brass coupling with steel tubular valve offers minimum air inclusion and fluid loss. Thread together latch provides connect under pressure capability and vibration resistance. It is not rated for continuous hydraulic impulse applications. Features: Tubular valve construction for virtually no fluid loss during disconnection, reduces environmental and worker safety hazards Low air inclusion during connection maintains system performance Available with wing or hex nut configurations Connect against pressure capability allows connecting of halves even when pressurizing up to 500 psi Steel flange available for accessible bulkhead mounting Standard seal material - Buna-N, Viton and EPR Standard body material - Brass with steel valving components, hex and wing nuts. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No. C1BS60
Aeroquip Model 5100-S5-12B
Coupling Thread Size Size (P) -10 -12 -16 -20 -24 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2
Seal Material Buna-N Buna-N Buna-N Buna-N Buna-N
A B (in) (in) Wt. 3.09 4.06 1.26 3.09 4.06 1.18 3.67 4.38 1.82 3.98 5.19 2.69 4.02 5.31 3.30
Price Each
C1BS59 5100-S5-10B C1BS61 5100-S5-16B C1BS62 5100-S5-20B C1BS63 5100-S5-24B
5100-S5 Female Half - Wing Nut Female Pipe - Valved
1066
Quick Disconnects
Fluid Transfer & Hydraulic 5100 Series - Low Spill Connect Under Pressure
Catalog Part No. C1BS54 C1BS55 Aeroquip Model 5100-S2-12B 5100-S2-16B Coupling Thread Size Size (P) -10 -12 -16 -20 -24 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 Seal Material Buna-N Buna-N Buna-N Buna-N Buna-N A B (in) (in) Wt. 3.11 1.38 0.89 3.11 1.38 0.79 3.55 1.76 1.33 3.71 2.10 1.64 4.12 2.48 2.60 Price Each
C1BS53 5100-S2-10B
C1BS56 5100-S2-20B
5100-S2 Male Half Less Flange Female Pipe - Valved
C1BS57 5100-S2-24B
Catalog Part No.
Aeroquip Model
Coupling Size -10, -12 -16 -20
Wt. 0.32 0.39 0.48
Price Each
C1BS65 5100-S7-12 C1BS66 5100-S7-16 C1BS67 5100-S7-20
5100-S7 Dust Cap with Chain

Catalog Part No. Aeroquip Model Coupling Size -10, -12 -16 -20 -24 Wt. 0.40 0.53 0.57 1.01 Price Each
C1BS69 5100-S9-12 C1BS70 5100-S9-16 C1BS71 5100-S9-20 C1BS72 5100-S9-24
Fluid Conveying
5100-S9 Dust Plug with Chain
1067
Quick Disconnects
Fluid Transfer & Hydraulic 5600 Series - Industrial Interchange
The 5600 Series general purpose coupling features PUSH-PULL latch and poppet valving in a low profile design. It is a favorite in North America and abroad. Features: PUSH-PULL ball latch design allows quick and easy connection and disconnection of fluid lines Self-sealing poppet valve provides excellent high and low pressure sealing Conforms dimensionally to ISO standard 7241/1 Series A Streamlined valving provides minimum pressure drop Standard seal materials - Buna-N, EPR and Viton Standard body material - Zinc plated steel with zinc poppet guides. (Brass poppet guide in -04 size). Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No. C1BS97 C1BS98 C1BS99
Aeroquip Model 5601-4-4S 5601-6-6S 5601-8-10S 5601-12-12S
Coupling Thread Size Size (P) -04 -04 -06 -10 -10 -12 -16 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 3/4-14 1-11-1/2
Seal Material Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N
A B (in) (in) Wt. 1.81 1.08 0.24 1.81 1.08 0.60 2.09 1.27 0.36 2.76 1.52 0.57 2.91 1.52 0.62 3.25 1.84 1.02 4.09 2.15 1.47
Price Each
C1BS96 5601-2-4S
5601 Female Half Female Pipe - Valved
C1BS93 5601-12-10S C1BS94 C1BS95 5601-16-16S
1068
Quick Disconnects

Catalog Part No. Aeroquip Model Coupling Size -04 -04 -06 -10 -10 -12 -16 Thread Size (P) 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 3/4-14 1-11-1/2 Seal Material Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N A (in) 1.17 1.24 1.40 1.89 2.03 2.28 2.77 Wt. 0.05 0.08 0.12 0.23 0.38 0.50 0.76 Price Each
C1BT14 5602-2-4S C1BT15 5602-4-4S C1BT16 5602-6-6S 5602-8-10S 5602-12-12S
5602 Male Half Female Pipe - Valved
C1BT17 C1BT12
C1BT11 5602-12-10S C1BT13 5602-16-16S
Catalog Part No.
Aeroquip Model
Coupling Size -10
A B (in) (in) 2.81 1.52
Wt. 0.57
Price Each
C1EN49 5608-10-10S
5608 Female Half Female SAE O-Ring - Valved

Catalog Part No. Coupling Size -10 Thread Size (P) 7/8-14 Seal Material Buna-N A (in) 2.08 Price Each
Fluid Conveying
Aeroquip Model
Wt. 0.22
C1EN50 5610-10-10S
5610 Male Half Female SAE O-Ring - Valved
Catalog Part No.
Aeroquip Model
Coupling Size -04 -06 -10 -12 -16
Wt. 0.03 0.04 0.04 0.11 0.19
Price Each
C1BT40 5657-4 C1BT41 5657-6 C1BT37 5657-10 C1BT38 5657-12 C1BT39 5657-16
5657 Dust Cap
5659 Dust Plug
Catalog Part No. C1BT46
Aeroquip Model 5659-10
Coupling Size -06 -10 -12
Wt. 0.02 0.04 0.07
Price Each
C1BT48 5659-6 C1BT47 5659-12
1069
Quick Disconnects
Catalog Part No. C1BT18 5603
Aeroquip Model
Coupling Size -10
Wt. 2.01
Price Each
5603 Break-Away Frame

Catalog Part No. C1CU49 Aeroquip Model FF082-12 Coupling Size -12 Seal Material Buna-N Wt. 0.18 Price Each
5600 Series Repair Kit (Each kit will repair one male or female half)
1070
Quick Disconnects
Fluid Transfer & Hydraulic FD42 Series - Pioneer 4000 Interchange

The FD42 Series coupling is designed as a Pioneer 4000 interchange to accommodate high surge flow applications. The maximum operating pressure is 3,000 PSI. Features: PTFE back-up ring in female half improves impulse life Self-sealing poppet valve design provides excellent high and low pressure sealing PUSH-PULL ball latch design allows quick and easy connection and disconnection of hose lines Interchanges with Pioneer 4000-2 and Safeway S20-A Retaining groove on female half for bulkhead mounting Male half can be bulkhead mounted with optional adapter (FF1607-0404S) Buna-N standard seal material Standard body material is zinc plated steel with zinc poppet guides.
Fluid Conveying
Catalog Part No.
Aeroquip Model
Coupling Size -04
A (in) 1.34
Wt. 0.09
Price Each
C1FK53 FD42-1002-04-04
FD42-1002 Male Half Female Pipe - Valved
1071
Quick Disconnects
Fluid Transfer & Hydraulic FD45 Series (Steel) - Industrial Interchange Series B
The FD45 Series steel is an industrial interchange popular in North America. It features a rugged ball latch mechanism with automatic self-sealing poppet valves. Features: Industrial interchange coupling conforming dimensionally to ISO standard 7241/1 Series B PUSH-PULL ball latch design allows quick and easy connection of hose lines Self-sealing poppet valve design provides excellent high and low pressure sealing Standard seal material - Buna N, EPR and Viton Standard body material - Zinc plated steel. (Brass poppet guide in -02 size). Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No. C1KU65 2H16 C1KZ23 3H21
Hansen Model
Coupling Thread Size Size (P) -04 -06 -10 -16 1/4-18 3/8-18 1/2-14 1-11-1/2
Seal Material Buna-N Buna-N Buna-N Buna-N
A (in)
B (in)
Wt.
Price Each
2.26 1.14 2.56 1.42 2.96 1.86 4.13 2.61
C1KV12 4HP26 C1KV48 8HP36
1072
Quick Disconnects
Fluid Transfer & Hydraulic FD45 Series (Steel) - Industrial Interchange Series B
Catalog Part No. C1KX64 1K11 C1KU66 2K16 C1KZ24 3K21 C1KX93 4KP26 C1KV49 8KP36 Hansen Model Coupling Size -02 -04 -06 -10 -16 Thread Size (P) 1/8-27 1/4-18 3/8-18 1/2-14 1-11-1/2 Seal Material Buna-N Buna-N Buna-N Buna-N Buna-N A (in) 1.26 1.52 1.76 2.03 2.85 0.74 Wt. Price Each
HK Series Male Half Female Pipe - Valved
Catalog Part No.
Aeroquip Model
Coupling Size -02 -10
Wt. 0.03 0.04
Price Each
C1CT90 FD45-1040-02 C1CT93 FD45-1040-10
FD45-1040 Dust Cap
Catalog Part No.
Aeroquip Model
Coupling Size -04 -06
Wt. 0.02 0.02
Price Each
C1CT97 FD45-1041-04 C1CT98 FD45-1041-06
Fluid Conveying
FD45-1041 Dust Plug
1073
Quick Disconnects
Fluid Transfer & Hydraulic FD45 Series (Brass) - Industrial Interchange Series B
The FD45 Series brass industrial interchange coupling offers corrosion resistance where steel couplings are unacceptable. This general purpose coupling uses a PUSH-PULL latch mechanism. Features: Dual interface o-rings in the female half provide redundant sealing while connected.Brass construction with stainless steel springs for greater corrosion resistance and fluid compatibility Industrial interchange coupling conforming dimensionally to ISO standard 7241/1 Series B PUSH-PULL ball latch design allows quick and easy connection of hose lines Self-sealing poppet valve design provides excellent high and low pressure sealing Standard seal material - Buna N, EPR and Viton Standard body material - Brass with stainless steel springs and balls. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No.
Aeroquip Model
A B (in) (in) Wt. 1.81 0.94 0.21
Price Each
C1CU20 FD45-1101-02-02
FD45-1101 FemHalf, FemalePipe-Valved

Catalog Part No. Aeroquip Model Coupling Size -02 Thread Size (P) 1/8-27 Seal Material Buna-N A (in) 1.28 Wt. 0.04 Price Each
C1CU13 FD45-1086-02-02
1074
Quick Disconnects
Fluid Transfer & Hydraulic FD45 Series (Stainless Steel) - Industrial Interchange Series B
The FD45 Series stainless steel general purpose industrial interchange coupling is available valved or non-valved. They are offered in 303/304 grades of stainless steel for excellent corrosion resistance in rugged applications. Features: Stainless steel construction for greater corrosion resistance and fluid compatibility Industrial interchange coupling conforming dimensionally to ISO standard 7241/1 Series B PUSH-PULL ball latch design allows quick and easy connection of hose lines Self-sealing poppet valve design provides excellent high and low pressure sealing Standard seal material - Buna N, EPR and Viton Standard body material - Stainless steel.
Fluid Conveying
Catalog Part No.
Hansen Model
Coupling Thread Size Size (P) -10 -12 -16 1/2-14 3/4-14 1-11-1/2
Seal Material Buna-N Buna-N Buna-N
A (in)
B (in)
Wt.
Price Each
C1KW35 LL4HP26 C1KZ46 LL6HP31 C1KY66 LL8HP36
2.96 1.86 3.48 2.22 4.13 2.61
FD45-1005 FemHalf, FemalePipe-Valved

Catalog Part No. Aeroquip Model Coupling Size -06 -12 Thread Size (P) 3/8-18 3/4-14 Seal Material Buna-N Buna-N A (in) 1.76 2.36 Wt. Price Each
C1KY65 LL3K21 C1KZ47 LL6KP31
1075
Quick Disconnects
Fluid Transfer & Hydraulic FD89 Series - Flush Face Hydraulic Tool - ISO 16028 Interchange
Aeroquip's FD89 Series is specifically designed for those applications where quick and easy connections and no-spill performance are essential. Ideal for use where global interchangeability with other manufactures is important. The FD89 Series is available in sizes from 1/4 inch through 2 inch. Features: Globally accepted interface which meets dimensional requirements of ISO 16028 (Sizes 1/4 to 1 inch) Quick and easy Push-to-Connect latching Safety sleeve lock guards against accidental disconnections The globally accepted interface meets HTMA requirements Dual flush face valves result in minimal fluid loss, air inclusion and easy cleaning. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No. C1KL88
Coupling Thread Size Size (P) -16 1-11-1/2
A (in)
B (in)
Wt. 1.70
Price Each
3.67 1.89

Catalog Part No. C1HZ91 Aeroquip Model 4HTOF6 Perfecting Model Coupling Thread Size Size (P) -08 1-1/16-12 Seal Material Buna-N A (in) B (in) Wt. 0.93 Price Each
3.50 1.50
FD89-1005 Female Half Female SAE O-Ring - Valved
1076
Quick Disconnects
Fluid Transfer & Hydraulic FD89 Series - Flush Face Hydraulic Tool - ISO 16028 Interchange
Catalog Part No. C1JC90 C1KL90 Aeroquip Model HT4OF6 FD89-1002-16-16 Coupling Size -08 -08 -16 Thread Size (P) 1/2-14 1-1/16-12 1-11-1/2 Seal Material Buna-N Buna-N Buna-N 3.24 A (in) 2.68 Wt. 0.75 0.64 0.86 Price Each
C1KL89 FD89-1002-08-08

Catalog Part No. Coupling Size -06 A (in) B (in) C (in) D (in) Price Each
Aeroquip Model
Wt. 0.05
C1FG82 FD89-1009-06
1.42 1.69 9.72 0.98
FD89-1009 Female Half Dust Cap PVC

Catalog Part No. Aeroquip Model Coupling Size -06-06 -08-06 A (in) B (in) C (in) D (in) Wt. 0.04 0.04 Price Each
Fluid Conveying
C1FG80 FD89-1008-06-06 C1FG81 FD89-1008-08-06
1.26 1.10 9.17 0.79 1.26 1.10 9.25 0.98
FD89-1008 Male Half Dust Cap PVC
1077
Quick Disconnects
Fluid Transfer & Refrigerant 5400 Series - Low Air Inclusion, Low Fluid Loss
The 5400 Series is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Features: Brazed or threaded end connections for versatility of installation on tubing or hose Tubular valve construction for low fluid loss and air inclusion Thread together design allows connection and disconnection against pressure Lock washer and jam nut standard for optional bulkhead mounting Standard seal material - Neoprene Standard adapter material - Steel or brass Standard body material - Zinc plated steel. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No. C1JM45
Aeroquip Model 5400-S8-4
Coupling Size -04
Wt. 0.03
Price Each
5400-S8 Dust Plug with Gasket
1078
Quick Disconnects
Hydraulic Farm FD72 Series - Push to Connect - Connect Under Pressure

The FD72 Series coupling incorporates special valving allowing connection to a male half under pressure (FD76 Series Male). The maximum operating pressure is 3,000 PSI. Features: Over-travel, self-sealing poppet valve construction for connecting to a pressurized male tip Requires that the tractor control valve be actuated to open the flow path and to equalize the pressure Push-to-connect for one hand operation when sleeve is mounted Interchanges with ISO 5675 male tips (FD76) Retaining ring groove on female half for bulkhead and breakaway frame mounting Standard seal material - Buna-N Standard body material - Zinc plated steel with zinc poppet guide.
Fluid Conveying
Catalog Part No.
Aeroquip Model
A B (in) (in) Wt. 3.17 1.52 0.74
Price Each
C1CU34 FD72-1001-08-10
1079
Quick Disconnects
Hydraulic Farm FD76 Series - Male Tip - Farm
Interchanges with ISO 5675 used on most farm tractors found throughout North America and abroad. Hydraulic Power & Control
Catalog Part No. C1CU35
Coupling Size -10
A (in) 2.05
Wt. 0.21
Price Each
FD76-1002 ISO 5657 Male Half Female Pipe - Poppet Valve
1080
Quick Disconnects
Special Application FD14 Series - Oil Drain Coupling

The FD14 Series Oil Drain Couplings provide direct access for fast oil changes, with a coupling design that permits easy, one hand connection and disconnection. Features: Saves time and labor costs Minimizes messy spills Able to change oil when it's hot Full-flow male half can be used with gravity or with pumping system Eliminates damaged or cross-threaded plugs.
Catalog Part No.
Aeroquip Model
Thread Size 1/2-20 UNF-2A M18 x 1.5 6g M14 x 1.25 6g 1-1/8-12 UNF-2A M20 x 1.5 6g M25 x 1.5 6g M22 x 1.5 6g M12 x 1.75 6g 3/4-14 NPT 1/2-14 NPT
Min. Assy. Flow Rate (175F A Torque (ft-lbs) 10W30 Oil) (in) 20-24 20-40 20-24 30-60 30-60 30-60 30-60 20-24
B (in)
Wt. 0.23 0.28 0.24 0.37 0.27 0.31 0.29 0.23 0.34 0.21
Price Each
Fluid Conveying
C1FK49 FD14-4002-01-06 C1EK53 FD14-4002-02-06 C1EK54 FD14-4002-03-06 C1EK87 FD14-4002-14-06 C1EK92 FD14-4002-16-06 C1EK98 FD14-4002-17-06
0.24 GPM 1.52 0.96 0.24 GPM 1.52 0.96 0.24 GPM 1.52 0.96 0.68 GPM 1.54 0.96 0.68 GPM 1.54 0.96 0.68 GPM 1.54 0.96 0.68 GPM 1.54 0.96 0.24 GPM 1.52 0.96 0.68 GPM 1.69 0.96 1.60 0.96
FD14-4002 C1FV92 FD14-4002-18-06 Male Half - Valved C1FK51 FD14-4002-25-06 Includes Gasket & Brass Cap C1EL26 FD14-4002-26-06
C1JF24 FD14-4002-27-06
CAUTION: Failure to meet minimum assembly torque could result in fluid leakage.
Catalog Part No.
Aeroquip Model
Hose Barb Size (in) 5/8
A (in)
B (in)
Wt. 0.26
Price Each
C1EL27 FD14-4003-10-06
2.34 1.50
FD14-4003 Female Half 5/8 Hose Barb
1081
Quick Disconnects
Special Application FD69 Series (Arc Latch) - High Pressure Water Blast (10,000 PSI)
The FD69 Series Arc Latch design has a greater surface area for long service life in rugged high pressure and water blast applications. The maximum operating pressure is 10,000 psi with 40,000 psi minimum burst pressure. Features: Safety sleeve lock guards against accidental disconnection Smooth bore straight through design for high flow Heavy duty back-up ring to prevent o-ring extrusion Available in plated steel and stainless steel for added corrosion resistance Standard seal material - Buna-N Standard body material - Zinc plated steel, stainless steel. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products
Catalog Part No.
Aeroquip Model
A B (in) (in) Wt. 2.13 1.62 0.68
Price Each
C1CU32 FD69-1001-08-08
FD69-1001 FemHalf, FemalePipe-Steel

Catalog Part No. Aeroquip Model Coupling Size -08 Thread Size (P) 1/2-14 A (in) 2.34 Wt. 0.33 Price Each
C1CU33 FD69-1002-08-08
FD69-1002 Male Half - Female Pipe Steel
1082
Quick Disconnects
Special Application FD90 Series - Diagnostic - SAE J1502 Interchange

The FD90 Series diagnostic coupling is designed to connect and disconnect pressure gauges to hydraulic systems, eliminating the need for permanent gauges. The maximum operating pressure is 7,000 PSI. Features: Automatic sleeve for one hand push-to-connect operation Flush face valving provides minimal fluid loss and low air inclusion Self-sealing valve design allows connection and disconnection at 500 psi Broad range of end configurations for system accessibility Standard seal material - Buna-N Standard body material - Zinc plated steel.
Catalog Part No. C1CU38
Coupling Thread Size Size (P) -04 -04 1/4-18 1/8-27
Seal Material Buna-N Buna-N
A B (in) (in) Wt. 2.25 1.0 1.95 1.0 0.26 0.25
Price Each
C1CU37 FD90-1021-02-04
Fluid Conveying
Catalog Part No.
Aeroquip Model
Coupling Size -04
A (in) 1.90
Wt. 0.12
Price Each
C1CU39 FD90-1034-04-04

Catalog Part No. Coupling Size -04 Thread Size (P) 9/16-18 Seal Material Buna-N A (in) 1.32 Price Each
Aeroquip Model
Wt. 0.07
C1CU41 FD90-1044-06-04
FD90-1044 Male Half Male SAE O-Ring Boss Valved
1083
Quick Disconnects
Special Application FD90 Series - Diagnostic - SAE J1502 Interchange
Catalog Part No. C1CU36 Aeroquip Model FD90-1012-04-04 Coupling Size -04 -04 Thread Size (P) 1/8-27 1/4-18 Seal Material Buna-N Buna-N A (in) 1.60 1.49 Wt. 0.08 0.07 Price Each
C1FK54 FD90-1012-02-04
FD90-1012 Male Half Male Pipe - Valved

Catalog Part No. Aeroquip Model Coupling Size -04 Thread Size (P) M 14 x 1.5 Seal Material Buna-N A (in) 1.38 Wt. 0.08 Price Each
C1FZ49 FD90-1046-06-04
FD90-1046 Male Half Metric Male O-Ring - Valved
Catalog Part No.
Aeroquip Model
Coupling Size -04
Wt. 0.01
Price Each
C1CU40 FD90-1040-04
Fluid Conveying
FD90-1040 Dust Cap for Male Halves
1084
Flanges
Steel SAE 4-Bolt Flanges (For Pipe)
W43-CB Pipe Thread Code 61 (3000 PSI) O-Ring Half Counterbored for Bolt Head
W43-CB
Catalog Part No. Anchor Model Kit Yes Yes Yes Yes Yes Pipe Pad Pipe Thread Drill Dia. H (in) K (in) Size Size A (in) B (in) C (in) D (in) E (in) F (in) G 0.75 0.75 2.06 1.0 1.0 2.31 1.25 1.25 2.88 1.50 1.50 3.25 2 2 3.81 2.56 0.875 1.875 1.25 2.75 1.031 2.062 1.38 3.12 1.188 2.312 3.69 1.406 2.75 4 1.5 1.62 0.84 0.97 1.03 1.09 1.09 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2 0.75 1.00 1.25 1.50 2.00 0.406 0.406 0.469 0.531 0.531 Wt. 1.20 1.37 2.00 3.00 Price Each C1JD95 W43-12-12U C1JD96 W43-16-16U C1JD97 W43-20-20U C1JD98 W43-24-24U C1JD99 W43-32-32U
1.688 3.062 1.62
Note: Model numbers with "Yes" in Kit column include mounting bolts, lock washers and Buna-N o-ring.
Fluid Conveying
W4 Flat Socket Weld Code 61 (3000 PSI) O-Ring Half
W4
Catalog Part No. C1DS78 C1DS79 C1JQ98 Anchor Model W4-24-24U W4-32-32U W4-48-48USH3.0 Bolts are 3" instead of standard 3-1/2" length Kit Yes Yes Yes Pipe Pad Drill Dia. Size Size A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) K (in) 1.50 1.50 3.25 3.688 1.406 2.75 1.19 0.75 1.922 1.50 0.531 0.531 0.656 2.00 2.00 3.813 4.00 1.688 3.063 1.38 0.875 2.406 2.00 3.00 3.00 5.156 5.313 2.438 4.188 2.120 1.250 3.615 3.002 Wt. 3.07 4.09 Price Each
9.29
1085
Flanges
W72 Flat Socket Weld Low Pressure (500 PSI) O-Ring Half
W72
Catalog Part No. C1JR15 Anchor Model W72-56-56U Kit Yes Pipe Pad Drill Dia. Size Size A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) K (in) 3.50 3.50 5.50 6.00 2.75 4.75 1.44 1.19 4.095 3.502 0.656 Wt. 7.48 Price Each
Note: Model numbers with "U" suffix include mounting bolts, lock washers and Buna-N o-ring.
Fluid Conveying
W61 Flat Socket Weld Code 61 (3000 PSI) Flat Face Half
W61
Catalog Part No. C1JR13 Anchor Model W61-16-16 Kit No Pipe Pad Drill Dia. Size Size A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) K (in) 1.00 1.00 2.313 2.75 1.031 2.063 0.88 0.63 1.56 1.002 0.406 Wt. 1.07 Price Each
1086
Flanges
W59 Flat Socket Weld O-Ring Half Code 62 (6000 PSI)
W59
Catalog Part No. C1KN75 C1JQ99 C1JR11 C1JR12 Anchor Model W59-20-20U W59-24-24U W59-32-32U W59-40-40U Kit Yes Yes Yes Yes Pipe Pad Drill Dia. Size Size A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) K (in) 1.25 1.25 3.06 1.50 1.50 3.75 2.00 2.00 4.50 2.50 2.50 5.87 3.75 1.250 2.625 1.500 0.690 1.750 1.252 4.44 1.437 3.125 1.750 0.750 2.115 1.502 5.25 1.750 3.812 1.750 0.875 2.490 2.002 6.87 2.312 4.875 2.060 1.000 2.995 2.502 0.531 0.656 0.781 0.906 Wt. 3.88 6.54 9.10 18.05 Price Each
Fluid Conveying
W60 Flat Socket Weld Code 62 (6000 PSI) Flat Face Half
W60
Catalog Part No. C1DT15 C1DT16 C1DT17 Anchor Model W60-16-16 W60-20-20 W60-24-24 Pipe Size 1.0 1.25 1.50 Pad A Size (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) K Tap (in) Wt. 1.0 2.75 3.19 1.093 2.25 1.25 2.625 1.5 1.5 0.63 1.328 1.00 0.69 1.672 1.25 0.75 1.922 1.50 7/16-14 1/2-13 5/8-11 2.61 3.30 2.43 1.25 3.06 3.75 Price Each
1.50 3.75 4.44 1.437 3.125 1.75
1087
Flanges
W168 Pipe Thread Elbow Code 61 (3000 PSI) O-Ring Half
W168
Catalog Part No. Anchor Model Kit Yes Yes Yes Pipe Size 1.00 1.25 1.50 Pad Size 1.00 1.25 1.50 Drill Pipe Thread Dia. A (in) C (in) D (in) H (in) M (in) K G 1.94 1.031 2.062 1-11-1/2 1.00 1.72 0.406 2.19 1.188 2.312 1-1/4-11-1/2 1.25 2.00 .469 2.56 1.406 1.75 1-1/2-11-1/2 1.50 2.12 .531 Wt. 3.00 2.69 1.50 Price Each
C1DS69 W168-16-16U C1ER61 W168-20-20U C1ER62 W168-24-24U
Fluid Conveying
W300 Male JIC Code 61 (3000 PSI) O-Ring Half
W300 Indexes & Technical Information

Catalog Part No. C1KG75 Anchor Model W300-8-8U Kit Yes Pad Size 0.50 Thread L 3/4-16 Dimensions (in) A=1.81 B=2.12 C=0.688 D=1.50 E=1.75 F=0.63 G=1.00 H=0.394 J=0.657 K=0.344 Wt. 1.00 Price Each
Note: Part numbers with "Yes" in Kit column include mounting bolts, lock washers and Buna-N o-ring.
1088
Flanges
W30 Butt Weld Code 62 (6000 PSI) O-Ring Half
W30
Catalog Part No. C1JQ97 Anchor Model W30-32U Kit Yes Pipe Pad Drill Dia. Size Size A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) K 2.00 2.00 3.44 5.25 1.75 3.812 2.48 1.46 2.375 1.689 0.781 Wt. 9.21 Price Each
W29 Butt Weld Code 62 (6000 PSI) Flat Face Half
Fluid Conveying
W29
Catalog Part No. C1JQ95 C1JQ96 W29-24 W29-32 Anchor Model Pipe Size 1.50 2.00 Pad A Size (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) K Tap (in) Wt. 1.50 2.81 4.44 1.437 3.125 2.17 2.00 3.44 5.25 1.75 3.812 2.48 1.10 1.90 1.337 5/8-11 3/4-10 4.00 28.82 1.46 2.375 1.689 Price Each
1089
Flanges
W7 Saddle Weld Code 61 (3000 PSI) Flat Face Half
W7
Catalog Part No. C1ZX34 W7-24-24 Anchor Model Pipe Size 1.50 Drill Pad A Dia. K Size (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) (in) 1.50 2.56 3.69 1.406 2.75 2.12 0.81 0.957 1.50 1/2-13 Wt. 2.24 Price Each
Fluid Conveying
1090
Flanges
Steel SAE 4-Bolt Flange Accessories
Catalog Part No. Anchor Model Pad Size 0.75 1.00 1.25 A (in) 1.50 1.75 2.00 C (in) D (in) E (in) 1.25 0.265 0.56 1.50 0.315 0.56 1.70 0.315 0.56 Wt. 0.21 0.31 0.41 Price Each
C1ES43 12FOP C1ZZ23 16FOP C1ZY88 20FOP
FOP Flange Plug, Code 61 (3000 PSI), O-Ring Half
Catalog Part No.
Anchor Model
Pad Size 0.75 1.00 1.25 1.50
A (in) 1.63 1.88 2.125 2.50
C (in) D (in) E (in) 1.25 0.345 0.687 1.50 0.38 0.81 1.00 0.405 1.750 2.00 0.495 1.187
Wt. 0.30 0.48 0.76 1.37
Price Each
C1ES44 12FOPX C1ES64 16FOPX C1ES81 20FOPX C1ES83 24FOPX
FOPX Flange Plug, Code 62 (6000 PSI), O-Ring Half

Catalog Pad A Part No. Anchor Model Size (in) B Thick (in) C (in) D (in) (in) Price Wt. Each 1.30 0.90
Fluid Conveying
J 10.31 mm 10.31 mm
C1KL25 AS-12-GP-M10 0.75 2.06 2.69 0.875 1.875 1.25 C1KL26 AS-16-GP-M10 1.00 2.31 2.75 1.031 2.062 0.88
AS Code 61 Gage Port Spacer

Catalog Part No. Pad A Size (in) B Thick (in) C (in) D (in) (in) Price Wt. Each
Anchor Model
C1KL27 ASX-12-GP-M10 0.75 2.50 2.95 0.937 2.000 1.25 10.31mm 1.69 C1KL28 ASX-16-GP-M12 1.00 2.75 3.19 1.093 2.250 1.50 12.50mm 2.30 C1KL29 ASX-20-GP-M14 1.25 3.06 3.75 1.250 2.625 1.50 14.48mm 3.09
ASX Code 62 Gage Port Spacer
1091
Flanges
Steel SAE 4-Bolt Flange Accessories

Catalog Part No. Anchor Model Pad Size C1KN56 SPX-20U C1KN57 SPX-24U C1KN58 SPX-32U 1.25 1.50 2.00 A (in) 3.06 3.75 4.50 B (in) 3.75 4.44 5.25 C (in) 1.250 1.437 1.750 D (in) 2.625 3.125 3.812 Wt. 1.13 1.78 2.63 Price Each
Note: Part number includes (1) shipping plate, (4) hex head bolts, and (1) Buna-N O-Ring.
SPX Zero PSI Code 62 Shipping Plate
Fluid Conveying
1092
Hose, Tube & Pipe Cleaning System

Hose/Tube Cleaning Guns & Projectiles

System consists of an air-operated gun-like launcher that cleans hoses, tubes and pipes in seconds. The launcher fires a soft projectile that is sized approximately 20% larger than the inside diameter of the product being cleaned. The projectile strips out the internal contamination or residue as it travels through the product, around bends and through couplings. Interchangeable nozzles handle the wide variety of projectile sizes. Applications: Hydraulic and pneumatic lines, fuel lines, food and beverage lines, steam pipes, heat exchangers and condensers, air conditioning and refrigeration, and many others. Launcher Unit: Locking faceplate pivots away from body for easy nozzle size change. O-Ring seals are used for positive sealing. Air inlet port with quick disconnect coupling. Trigger mechanism for firing projectile. Nozzles: A wide range of nozzle sizes are available in four basic styles. HOSE & PIPE: The nozzle is inserted into the hose or pipe. JIC: The male flared end of the JIC nozzle butts against the female flare of the hose or tube fitting. TUBE: The nozzle is inserted over the tube and the end of the tube butts up against the inside of the nozzle. BSP: The female flared end of the BSP nozzle butts against the male flared end of the hose or tube fitting. Recommended Operating Pressure: 85 PSI minimum. 150 PSI maximum. Projectile Sizing: To clean an I.D. of 2 inches or less, the O.D. of the projectile should be approximately 20% larger than the I.D. If I.D. is larger than 2 inches, projectile should be approximately 10% larger than the I.D. (Individual circumstances may require a smaller or a larger projectile than what is listed in the tables. If the projectile is too large it will not leave the nozzle, and if it is too small it will not clean effectively. If a projectile gets stuck inside the I.D., shoot an empty discharge in the opposite end). Note: Contact us for launcher and nozzle information, and for application assistance.
Standard Projectiles
Standard Projectiles
Catalog Part No. UltraClean Model C1EP28 UC06 C1ZV55 UC07 C1ZS65 UC22 C1ZV53 UC26 C1ZV52 UC33 C1KN68 UC36 C1ZV51 UC40 C1EP75 UC50 C1EQ43 UC60 C1KN69 UC70 Use for I.D. (in) 0.23622 0.2756 0.8661 1.0236 1.2992 1.4173 1.5748 1.9685 2.3622 2.7559 Nozzle for Hose I.D. (in) 3/16 1/4 5/8 3/4 1 1-1/8 1-1/4 1-1/2 2 2-1/2 Nozzle for Tube/Pipe O.D. (in) H06 H06 H16 H19 H25 H25 H32 H38 H50 H50 Pkq. Qty. Wt. (ea) 100 100 100 50 40 40 30 20 15 15 0.01 0.01 0.01 0.01 0.02 0.01 0.02 0.01 0.01 0.06 Price Each
Note: Projectiles may be ordered as "each" - example 100 each.
1093
Metric & BSP Seals & Washers

Catalog Part No. Voss Model BSP Size 1/8 1/4 3/8 1/2 5/8 3/4 1.0 1-1/4 Z X Z (in) (mm) X (in) (mm) 0.407 10.34 0.627 15.94 0.539 13.71 0.812 20.64 0.679 17.25 0.939 23.87 0.847 21.52 1.127 28.64 0.923 23.46 1.244 31.82 1.064 27.02 1.377 34.99 1.333 33.86 1.687 42.87 1.688 42.9 2.064 52.44 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.02 0.02 Price Each
C1DX13 400-820-4490-A C1DX14 400-821-4490-A C1DX15 400-823-4490-A C1DX16 400-825-4490-A C1DX17 400-826-4490-A C1DX18 400-827-4490-A C1DX19 400-830-4490-A C1DX20 400-832-4490-A
Self-Centering BSP Bonded Seals
Catalog Part No.
Voss Model
Metric Size M 08 M 10 M 12 M 14 M 14 M 14 M 16 M 16 M 18 M 18 M 20 M 22 M 27 M 30 M 33 M 36
Z X Z (in) (mm) X (in) (mm) 0.342 0.50 8.7 0.551 14 16 18 22 22 22 24 24 26 26 28 30 36 39 42 46 0.421 10.7 0.629 12.7 0.708 0.578 14.7 0.866 0.578 14.7 0.866 0.578 14.7 0.866 0.657 16.7 0.945 0.657 16.7 0.945 0.736 18.7 1.024 0.736 18.7 1.024 0.815 20.7 1.102 0.894 22.7 1.181 1.09 27.7 1.42 1.248 31.7 1.535 1.326 33.7 1.653 1.444 36.7 1.811
Wt. 0.01 0.01 0.01 0.02 0.01 0.01 0.01 0.01 0.02 0.01 0.01 0.02 0.01 0.01 0.01 0.01
Price Each
C1DW94 400-613-4490-A C1DW95 400-617-4490-A C1DW96 400-622-4490-A C1EK39 9500-14MM C1DW97 400-627-4490-A C1FG24 400-010-4490 C1FG25 400-011-4490 C1DW98 400-629-4490-A C1FG26 400-024-4490 C1DW99 400-632-4490-A C1DX11 400-633-4490-A C1DX12 400-636-4490-A C1FG29 400-240-4490 C1FG30 400-242-4490 C1FG31 400-243-4490 C1FG32 400-245-4490 Note: 9500 is Adaptall model. Catalog Part No.
Self-Centering Metric Bonded Seals
Fluid Conveying
Voss Model
I.D. (mm) 10 12 14 16 18 22
O.D. (mm) 13.5 15 18 20 22 27
Height (mm) 1.0 1.0 1.0 1.0 1.50 1.50
Wt. 0.01 0.01 0.01 0.01 0.01 0.01
Price Each
C1AD71 082-109 C1AD72 082-149 C1DU48 082-189 C1AD73 082-229 C1DU49 082-309 C1AD74 082-429
Copper Washers
1094
Protective Closures
Catalog Alliance Plastics Part No. Model C1EJ75 C1EJ76 C1EJ77 C1EJ78 C1EJ79 C1EJ80 C1EJ81 T-3 T-4 T-5 T-6 T-7 T-8 T-9 Size -04 JIC / -04 SAE -05 JIC / -05 SAE -06 JIC -06 SAE -08 JIC / -08 SAE -10 JIC / -10 SAE -12 JIC -12 SAE -16 JIC -20 JIC -24 JIC -32 JIC Threads 7/16-20 1/2-20 9/16-18 5/8-18 3/4-16 7/8-14 1-1/16-12 1-1/16-14 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.02 0.01 0.30 0.01 0.01 Price Each
Threaded Plugs For Flared Fittings C1EJ73 T-10 Red C1EJ74 T-12 Grade 1 Virgin Polyethylene
C1EJ64 C1EJ65 C1EJ66 PD-200 PD-240 PD-320
Catalog Alliance Plastics Part No. Model C1EJ46 C1EJ51 C1EJ52 C1EJ53 C1EJ44 C1EJ45 G-2 G-5 G-8 G-9 G-14 G-17
Size -04 JIC / -04 SAE -05 JIC / -05 SAE -06 JIC -06 SAE -08 JIC / -08 SAE -10 JIC / -10 SAE -12 JIC -12 SAE -16 JIC -20 JIC
Threads 7/16-20 1/2-20 9/16-18 5/8-18 3/4-16 7/8-14 1-1/16-12 1-1/16-14 1-5/16-12 1-5/8-12
Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.50 0.01 0.01 0.01
Price Each
Fluid Conveying
Threaded Caps For Flared Fittings C1EJ47 G-22 C1EJ48 G-23 Blue C1EJ49 G-27 Grade 1 Virgin Polyethylene
C1EJ50 G-30
Catalog Alliance Plastics Part No. Model C1EJ92 C1EJ91 C1EJ95 C1EJ90 C1EJ94 C1EJ87 Y-1/8 Y-1/4 Y-3/8 Y-1/2 Y-3/4 Y-1 Y-1-1/4 Y-1-1/2 Y-2
Size 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT 1-1/4 NPT 1-1/2 NPT 2 NPT
Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
Price Each
Tear Caps For Pipe Threads Blue Grade 1 Virgin Polyethylene
C1EJ89 C1EJ88 C1EJ93
1095
Protective Closures
Catalog Alliance Plastics Part No. Model C1EJ62 C1EJ54 C1EJ55 P-8 P-11 P-17 P-23 P-31 P-53 P-68 Size 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1-1/4 NPT 2 NPT Wt. 0.01 0.01 0.01 0.01 0.50 0.01 0.01 Price Each
Tapered Plugs for Pipe Threads Blue Grade 1 Virgin Polyethylene
C1EJ56 C1EJ57 C1EJ59 C1EJ61
Catalog Alliance Plastics Part No. Model C1FK85 OR-20
Fits Thread Size 1-11/16-12 (-20 O-Ring Face Seal)
Wt. 0.01
Price Each
Fluid Conveying
Caps For O-Ring Face Fittings Blue Grade 1 Virgin Polyethylene

Catalog Alliance Plastics Part No. Model C1EJ67 C1EJ68 C1EJ69 C1EJ70 C1EJ71 Q-1 Q-3 Q-4 Q-5 Q-6 Size -08 Code 61 -12 Code 61 -16 Code 61 -20 Code 61 -24 Code 61 Wt. 0.01 0.01 0.01 0.01 0.01 Price Each
Split Flange Caps Natural Grade 1 Virgin Polyethylene

Catalog Alliance Plastics Part No. Model C1EJ37 BFP-1 BFP-1-1/2 XP-2 C1EJ38 C1EJ85 Price Each
Size -16 Code 61 -24 Code 61 -32 Code 62
Wt. 0.01 0.01 0.01
Bolted Flange Protectors Code 61 Blue / Code 62 Red Low Density Polyethylene
1096
Split Flange Kits & O-Rings

Split Flange Kits
Hydraulic Power & Control Each Kit Includes: (2) flange halves, (4) grade 8 hex bolts, (4) lock washers and (1) 90 durometer Buna-N O-Ring. Flange Halves: Zinc plated yellow chromate finish. Fluid Compatibility: Buna-N is compatible with petroleum and water base hydraulic fluids. Operating Temperature Range: -40F. to +250F. Note: For applications where fluid compatibility or high temperatures require other than Buna-N, contact us for assistance.
SFO Code 61 Split Flange Kits
SFO Code 61 Split Flange Kits

Catalog Part No. C1ZY50 C1AJ84 C1CV41 C1AL35 C1BB68 C1CV44 C1BN96 Anchor Model 8SFO 12SFO FF593-16 16SFO 20SFO FF593-32 40SFO Flange Head Dia. 0.50 1.50 1.75 1.75 2 2.38 2.81 2.81 3.31 Flange Maximum Recommended Dash Operating Size Pressure (psi) Bolt Torque (lb-in) A (in) D (in) E (in) -08 -12 -16 -16 -20 -24 -32 -32 -40 5000 5000 5000 5000 4000 3000 3000 3000 2500 175-225 225-350 325-425 325-425 425-550 550-700 650-800 650-800 950-1100 0.86 1.50 0.75 1.88 0.44 0.41 2.06 0.52 0.41 2.06 0.52 0.41 2.31 0.59 0.47 2.75 0.70 0.53 3.06 0.84 0.53 3.06 0.84 0.53 3.5 1.0 0.53 G (in) 1.22 0.56 0.62 0.62 0.56 0.62 0.62 0.62 0.75 Wt. 0.53 0.68 0.65 0.75 1.03 1.41 1.54 1.62 2.32 Price Each
Fluid Conveying
C1BG72 24SFO C1BM16 32SFO
Note: FF593 is an Aeroquip model.
SFXO Code 62 Split Flange Kits SFXO Code 62 Split Flange Kits
Catalog Part No. C1AJ85 C1HE88 C1AL36 C1BB69 Anchor Model 12SFXO FF595-16 16SFXO 20SFXO Flange Head Dia. 1.63 1.88 1.88 2.12 2.5 Maximum Flange Dash Operating Recommended G Size Pressure (psi) Bolt Torque (lb-in) A (in) D (in) E (in) (in) -12 -16 -16 -20 -24 6000 6000 6000 6000 6000 300-400 500-600 500-600 750-900 1400-1600 2.00 0.47 0.42 0.75 2.25 0.55 2.25 0.55 2.62 0.62 0.5 0.5 0.6 0.94 0.94 1.06 Wt. 1.04 1.41 1.54 2.35 3.87 Price Each
C1BG73 24SFXO
3.12 0.72 0.66 1.19
Note: SFXO-M models have metric mounting holes and come with metric bolts. Note: FF595 is an Aeroquip model.
1097

O-Rings
O-Rings for SAE J518 Split Flange Fittings & Adapters

Catalog Part No. C1CV57 C1CV58 C1CV59 C1CV60 C1CV61 Aeroquip Model FF9446-214 FF9446-219 FF9446-222 FF9446-225 FF9446-228 Nominal Flange Size 1/2 3/4 1 1-1/4 1-1/2 2 Flange Dash Size -08 -12 -16 -20 -24 -32 Material Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Operating Temperature Range (F) -40 to +250 -40 to +250 -40 to +250 -40 to +250 -40 to +250 -40 to +250 I.D. (A) 0.734 0.984 1.296 1.484 1.859 2.234 Width (E) 0.139 0.139 0.139 0.139 0.139 0.139 O.D. (in) 1.012 1.262 1.574 1.762 2.137 2.512 Wt. 0.15 0.15 0.15 0.10 0.10 0.10 Price Each
C1CV56 FF9446-210
D-Rings for Caterpillar Flanges Fluid Conveying

Catalog Part No. Aeroquip Model Nominal Flange Size 3/4 1 1-1/4 Flange Dash Size -12 -16 -20 Material Buna-N Buna-N Buna-N Operating Temperature Range (F) -40 to +212 -40 to +212 -40 to +212 I.D. (A) 1.00 1.25 1.50 Width (E) 0.14 0.14 0.14 O.D. (in) 1.27 1.52 1.77 Wt. 0.01 0.01 0.01 Price Each
C1EW76 FF90319-12 C1EW77 FF90319-16 C1EW78 FF90319-20
O-Rings for ORS Fittings & Adapters

Catalog Part No. Aeroquip Model Tube Size 0.25 0.25 0.375 0.50 0.63 0.75 0.75 1.0 1.25 Material Buna-N (90 durometer) Neoprene (72 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Neoprene (72 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Operating Temperature Range (F) -40 to +250 -65 to +300 -40 to +250 -40 to +250 -40 to +250 -40 to +250 -65 to +300 -40 to +250 -40 to +250 I.D. (A) 0.301 0.301 0.364 0.489 0.614 0.739 0.364 0.926 1.176 Width (E) 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 O.D. (in) 0.441 0.441 0.504 0.629 0.754 0.879 0.504 1.066 1.316 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.05 Price Each
C1CV50 FF9446-11 C1BD60 22546-11 C1CV51 C1CV52 C1CV53 C1CV54 C1BD61 FF9446-12 FF9446-14 FF9446-16 FF9446-18 22546-12 FF9446-21
C1CV55
C1CV62 FF9446-25
1098

O-Rings
O-Rings for Bump Tube O-Ring Seal Fittings
Catalog Part No. C1EY12 C1EY13 C1EY14 C1EY15 Pilot Dash Aeroquip Model Size FF90178-11 FF90178-13 FF90178-15 FF90178-17 -06 -08 -10 -12 Material HNBR (70 durometer) HNBR (70 durometer) HNBR (70 durometer) HNBR (70 durometer) Operating Temperature Range (F) -25 to +300 -25 to +300 -25 to +300 -25 to +300 I.D. (A) Width (E) O.D. (in) Wt. 0.01 0.01 0.01 0.01 Price Each
0.301 0.0625 0.426 0.426 0.0625 0.551 0.551 0.0625 0.676 0.676 0.0625 0.801
22546 Neoprene O-Rings: For use with R12 and R22 refrigerants. FF90178 HNBR O-Rings: For use with R134 refrigerant.
O-Rings for SAE O-Ring Boss Fittings & Adapters

Catalog Part No. Aeroquip Model Tube Size 0.188 0.25 0.3125 0.375 0.375 0.50 0.50 0.625 0.625 0.75 0.875 1.0 1.25 1.25 1.50 2.00 Material Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Buna-N (90 durometer) Operating Temperature Range (F) -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 -30 to +250 I.D. (A) 0.301 0.351 0.414 0.468 0.468 0.644 0.644 0.755 0.755 0.924 1.047 1.171 1.475 1.475 1.720 2.337 Width (E) 0.064 0.072 0.072 0.078 0.078 0.087 0.087 0.097 0.097 0.116 0.116 0.116 0.118 0.118 0.118 0.118 O.D. (in) 0.429 0.495 0.558 0.624 0.624 0.818 0.818 0.949 0.949 1.156 1.279 1.403 1.711 1.711 1.956 2.573 Wt. 0.01 0.05 0.01 0.01 0.01 0.15 0.01 0.15 0.01 0.02 0.10 0.01 0.01 0.01 0.01 0.01 Price Each
C1FE91 B-903 C1BD77 22617-4 C1BD78 22617-5 C1BD79 C1BD80 C1BD73 C1BD74 C1BD75 22617-6 22617-8 22617-10 22617-12 22617-16 C1CL30 B-906 C1CL31 B-908 C1CL32 B-910 C1CL34 B-914 C1BD76 22617-20 C1CL36 B-920 C1CL37 B-924 C1EH75 B-932
Note: B-900 series models are not Aeroquip.
1099
Support Clamps
Hose Support Clamps

Features: These light weight vinyl-coated steel support clamps are designed to support hose where long runs are necessary. This clamp not only furnishes a cleaner installation, but prevents damage, exposure and chafing. The lining will withstand high ambient temperatures. Hose Support Clamps
Catalog Part No. Aeroquip Model Clamp I.D. (Closed) 0.25 0.44 0.50 0.56 0.63 0.69 0.75 0.81 0.94 1.00 1.06 1.13 1.19 1.25 1.50 1.56 1.75 2.00 2.25 2.50 2.75 2.88 3.56 Bolt Hole Dia. Wt. 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.18 0.05 0.04 0.04 0.04 0.33 0.04 0.05 0.06 0.05 0.09 0.09 0.01 0.10 0.11 0.11 1.30 0.14 0.16 0.16 0.19 0.19 0.24 Price Each
C1CB45 900729-18
C1CB36 900729-01 C1CB37 900729-1 C1CB47 900729-2 C1CB48 900729-21 C1CB55 900729-3
900729
C1CB59 900729-4 C1CB60 C1CB61 C1CB62 900729-5 900729-6 900729-8
C1CB49 900729-23 C1CB63 900729-9 C1CB52 900729-27 C1CB50 900729-24 C1CB38 C1CB40 900729-10 900729-12 C1CB39 900729-11 C1CB41 900729-13 C1CB42 900729-14 C1CB56 900729-30 C1CB43 900729-15 C1EK29 900729-16 C1CB44 900729-17
Fluid Conveying
1100
Support Clamps
Pipe & Tubing Support Clamps Hydrazorb 100-200 Series
Features: Allows fluid conductors to be removed or added easily without disturbing adjacent conductors. Fast and simple installation. Clamps: Available in zinc plated steel, galvanized steel, 304/304 stainless, 316 stainless, and aluminum. Base Channel: Available in single & back-to-back, 12 ga. steel, 14 ga. Steel, 14 ga. 304 stainless, 14 ga. 316 stainless, and 6061T6 aluminum. Channel lengths from 36 to 240 inches are available in most styles. Operating Temperature Range: Cushion has -65F to 275F rating. Hydraulic Power & Control Pneumatic Power & Control
Clamps
Hydra-Zorb 100-200 Series Clamps

Catalog Part No. Hydrazorb Model Size & Type 1/4 inch Tubing 1/4 inch Tubing 5/16 inch Tubing 3/8 inch Tubing 3/8 inch Tubing 1/2 inch Tubing 1/2 inch Tubing 5/8 inch Tubing 3/4 inch Tubing 3/4 inch Tubing 7/8 inch Tubing 1 inch Tubing Clamp Material Zinc plated steel 316 SS Zinc plated steel Zinc plated steel 316 SS Zinc plated steel 316 SS Zinc plated steel Zinc plated steel 316 SS Zinc plated steel Zinc plated steel Stud/Bolt Material Steel weld stud SS weld stud Steel weld stud Steel weld stud SS weld stud Steel weld stud SS weld stud Steel weld stud Steel weld stud SS weld stud Steel weld stud Steel weld stud Steel weld stud Steel weld stud SS weld stud Steel weld stud Nut SS Nylock A (in) B (in) C (in) D (in) 0.22 0.075 0.62 0.22 0.075 0.62 0.28 0.075 0.75 0.28 0.075 0.75 0.28 0.075 0.75 0.34 0.075 0.87 0.34 0.075 0.87 0.41 0.075 1.00 0.53 0.075 1.33 0.53 0.075 1.33 0.58 0.075 1.45 0.66 0.105 1.66 0.72 0.105 1.79 0.78 0.105 1.92 0.78 0.105 1.92 0.91 0.119 2.22 1.11 Wt. 0.11 0.09 0.12 0.12 0.12 0.25 0.13 0.14 0.25 0.17 0.18 0.25 0.54 0.50 0.25 0.50 Price Each C1EX25 100025 C1EX26 100025-4-656 C1EX27 100031 C1AG11 100037 C1EX29 100037-4-656 C1AG12 100050 C1EX30 100050-4-656 C1AG13 100062 C1AG16 100075 C1EX32 100075-4-656 C1AG17 100087 C1AG18 100100 C1HC83 100112 C1AG19 100125 C1EX35 100125-4-656 C1AG20 100150 Steel Nylock 1.11 Steel Nylock 1.24 Steel Nylock 1.24 SS Nylock SS Nylock 1.24 1.36 Steel Nylock 1.36 Steel Nylock 1.50 Steel Nylock 1.78 SS Nylock 1.78 Steel Nylock 1.91 Steel Nylock 2.03 Steel Nylock 2.16 Steel Nylock 2.30 SS Nylock 2.30 Steel Nylock 2.75
1-1/8 inch Tubing Zinc plated steel 1-1/4 inch Tubing Zinc plated steel 1-1/4 inch Tubing 316 SS 1-1/2 inch Tubing Zinc plated steel
Base Channel Indexes & Technical Information
Hydrazorb Base Channel

Catalog Part No. C1AJ47 Hydrazorb Model 121048-1-203 Type Single Single Material 316 SS 12 gauge mild steel Length (in) 48 48 Height (in) 0.8125 1.0 Wt. 3.75 5.62 Price Each
C1EX40 121048-6-101
1101
Support Clamps
Pipe & Tubing Support Clamps Stauff Standard Series

Features: For outside diameters from 1/4" to 4". Weld plate style available for single clamps. Rail mounting style available for all sizes. Clamp material available in polypropylene, polyamide and aluminum. Recommended Spacing for Pipe: 1/4in=3FT, 3/8in=4FT, 1/2in=4FT, 3/4in=5FT, 1in=7FT, 1-1/4in=8FT, 1-1/2in=9FT, 2in=10FT, 2-1/2in=11FT, 3in=12FT. Recommended Spacing for Tubing: 1/4in-1/2in = 3FT, 5/8in-7/8in=4FT, 1in=5FT, 1-1/4in-1-1/2in=7FT. Temperature Ratings: Polypropylene -22F to 194F. Polyamide -40F to 284F. Aluminum -40F to 500F. Note: Hose may be clamped using smooth body I.D. style clamps. MM size x .03937 = Inch size.
Fluid Conveying
SP*DPAS Single Weld Plate Hex Head Bolts with Cover Plate
SP*DPAS Stauff Clamps

Catalog Part No. MM Inch Inch Size Tube Pipe Tube (mm) Size Size Size 6.4 9.5 10.0 12.0 12.7 15 16.0 17.1 17.4 18.0 19.0 18 19 3/4 15 16 3/8 5/8 10 12 1/2 1/8 1/4 3/8 Inch Hose O.D. Size Group 0.25 0.37 0.39 0.47 0.50 0.59 0.63 0.67 0.69 0.71 0.75 1 1 1 1 2 2 2 2 3 2 3 Body Material Body I.D. Indiv. B2 H1 H3 Pkg. (in) (in) (in) Wt. Yes 1.18 1.06 0.64 0.16 Yes 1.18 1.06 0.64 0.15 Yes 1.18 1.06 0.64 0.15 Yes 1.18 1.06 0.64 0.15 Yes 1.18 1.29 0.76 1.66 Yes 1.18 1.29 0.76 0.20 Yes 1.18 1.29 0.76 0.21 Yes 1.18 1.29 0.76 1.66 Yes 1.18 1.41 0.82 0.26 Yes 1.18 1.29 0.76 0.22 Yes 1.18 1.41 0.82 0.25 Price Each
Stauff Model
C1EZ66 SP1064PPDPAS-BAG C1EZ68 SP1095PPDPAS-BAG C1EZ69 SP1100PPDPAS-BAG C1EZ70 SP1120PPDPAS-BAG C1EF84 SP2127PPDPAS-BAG C1KN42 SP215PPHDPASMW1 0 C1EZ71 SP2160PPDPAS-BAG C1EF86 SP2171PPDPAS-BAG C1ZS95 SP3174PPHDPAS-BA C1EZ72 SP2180PPDPAS-BAG C1EF13 SP3190PPDPAS-BAG
Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled
1102
Support Clamps
SP*DPAS Stauff Clamps
Catalog Part No. MM Inch Inch Size Tube Pipe Tube (mm) Size Size Size 19 20.0 20.5 21.3 22.0 22.0 25.4 26.6 26.9 27.8 28 30 32.0 33.4 37.0 38 38.1 42.2 44.5 57.2 63.5 1-1/4 1-3/4 2-1/4 2-1/2 1-1/2 1-1/2 32 1 1-1/4 3/4 3/4 1.0 22 1/2 7/8 20 3/4 Inch Hose O.D. Size Group 0.75 0.79 0.81 0.84 0.87 0.87 1.00 1.05 1.06 1.09 1.10 1.18 1.26 1.31 1.46 1.50 1.50 1.66 1.75 2.25 2.50 3 3 3 3 3 3 3 4 4 5 4 4 5 5 5 5 5 5 6 7 7 Body Material Body I.D. Indiv. B2 H1 H3 Pkg. (in) (in) (in) Wt. Yes 1.18 1.41 0.82 0.20 Yes 1.18 1.41 0.82 0.25 Yes 1.18 1.41 0.82 0.26 Yes 1.18 1.41 0.82 0.35 Yes 1.18 1.38 0.79 0.25 Price Each
Stauff Model
SP319PPHDPASMW1 C1KN44 0 C1EZ73 SP3200PPDPAS-BAG C1ZS93 SP3205PPHDPAS-BA C1EF15 SP3213PPDPAS-BAG C1EZ74 SP3222PPDPAS-BAG C1GA55 SP3222PPHDPAS C1EF17 SP3254PPDPAS-BAG C1EZ75 SP4266PPDPAS-BAG SP4269PPHDPASMW C1KN45 10 C1ZS91 SP5278PPHDPAS-BA SP428PPHDPASMW1 C1KN46 0 C1KN47 SP530PPHDPASMW1 0 C1EX15 SP5320PPDPAS-BAG C1EZ77 SP5334PPDPAS-BAG C1HG84 SP5370PPHDPAS-K C1KN48 SP538PPHDPASMW1 0 C1EF89 SP5381PPDPAS-BAG C1EF22 SP5422PPDPAS-BAG C1JR29 SP6445PPHDPAS-K C1KN49 SP7572PPHDPASMW 10 C1EF90 SP7635PPDPAS-BAG DP8 C1JA49 Cover Plate for Group 8 size clamps
Polypropylene Smooth Polypropylene Profiled Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Smooth Polypropylene Smooth Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Smooth Polypropylene Profiled Carbon Steel
Yes 1.18 1.38 0.79 0.26 Yes 1.18 1.41 0.82 0.25 Yes 1.18 1.65 0.94 0.31 Yes 1.18 1.65 0.94 0.30 Yes 1.18 2.28 1.25 0.48 Yes 1.18 1.65 0.94 0.30 Yes 1.18 1.65 0.94 0.41 Yes 1.18 2.28 1.25 0.41 Yes 1.18 2.28 1.25 0.39 Yes 1.18 2.28 1.25 0.42
Fluid Conveying
Yes 1.18 2.28 1.25 Yes 1.18 2.28 1.25 0.42 Yes 1.18 2.28 1.25 0.42 Yes 1.18 2.59 1.42 0.54 Yes 1.18 3.66 2.02 1.20 Yes 1.18 3.66 2.02 4.64
0.35
1103
Support Clamps
SP*ASE Single Weld Plate Hex Head Bolts with Spacers
SP*ASE Stauff Clamps

Catalog Part No. Inch MM Inch Inch Hose Size Tube Pipe Tube O.D. (mm) Size Size Size Size Group 21.3 26.6 33.4 35.0 38.1 42.2 48.3 1-1/4 1-1/2 1/2 3/4 1.0 0.84 1.05 1.31 1.38 1.50 1.66 1.90 3 4 5 5 5 5 6 Body Material Body I.D. Indiv. B2 H1 H3 Pkg. (in) (in) (in) Wt. Yes Yes Yes Yes Yes Yes Yes 1.19 1.38 0.80 0.25 1.18 1.65 0.92 0.25 1.19 2.33 1.28 0.30 1.19 2.33 1.28 0.32 1.19 2.33 1.28 0.31 1.19 2.33 1.28 0.30 1.19 2.59 1.42 0.37 Price Each
Stauff Model
C1EF14 SP3213PPASE-BAG/ C1FR13 SP4266PPASE-BAG C1EF19 SP5334PPASE-BAG/ C1FH29 SP5350PPHASE-BAG C1FH30 SP5381PPHASE-BAG C1EF21 SP5422PPASE-BAG/ C1EF24 SP6483PPASE-BAG/
Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled
Fluid Conveying
SM*DPAS Mounts on TS Mounting Rail Hex Head Bolts with Cover Plate (Includes 2ea SM1-8 Rail Nuts)
SM*DPAS Stauff Clamps

Catalog Part No. Inch MM Inch Inch Hose Size Tube Pipe Tube O.D. (mm) Size Size Size Size Group 12.7 13.7 16.0 19.0 20.0 21.3 22.2 25.4 26.6 28.0 32.0 33.4 28 32 1 1-1/4 3/4 16 19 20 1/2 7/8 1 1/4 5/8 3/4 1/2 0.50 0.54 0.63 0.75 0.79 0.84 0.87 1.00 1.05 1.10 1.26 1.31 2 2 2 3 3 3 3 3 4 4 5 5 Body Material Body I.D. Indiv. B2 H1 Pkg. (in) (in) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 1.18 1.29 1.18 1.29 1.18 1.29 1.18 1.41 1.18 1.41 1.18 1.41 1.18 1.41 1.18 1.41 1.18 1.65 1.18 1.65 1.18 2.28 1.18 2.28 Price Each
Stauff Model
Wt. 0.20 0.19 0.19 0.22 0.21 0.22 0.21 0.20 0.21 0.25 0.30 0.33 0.35
C1EZ50 SM2127PPDPAS-BAG C1EZ51 SM2137PPDPAS-BAG C1EZ52 SM2160PPDPAS-BAG C1EZ55 SM3190PPDPAS-BAG
Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Carbon Steel
C1EZ56 SM3200PPDPAS-BAG C1EZ57 SM3213PPDPAS-BAG C1EZ58 SM3222PPDPAS-BAG C1EZ59 SM3254PPDPAS-BAG C1EZ60 SM4266PPDPAS-BAG C1EZ61 SM4280PPDPAS-BAG C1EZ62 SM5320PPDPAS-BAG C1EZ63 SM5334PPDPAS-BAG DP8 C1JA49 Cover Plate for Group 8 size clamps
1104
Support Clamps
SM1-8 Rail Nut SM1-8 Stauff Rail Nuts
Catalog Part No. Stauff Model Description Standard Series rail nut Wt. 0.02 Price Each
C1EE99 SM1-8
1105
Support Clamps
Pipe & Tubing Support Clamps Stauff Heavy Series

Features: For outside diameters from 1/4" to 18". Weld plate style available for single clamps. Rail mounting style available for groups 3s thru 6s. Clamp material available in polypropylene, polyamide and aluminum. Recommended Spacing for Pipe: 1/4in=3FT, 3/8in=4FT, 1/2in=4FT, 3/4in=5FT, 1in=7FT, 1-1/4in=8FT, 1-1/2in=9FT, 2in=10FT, 2-1/2in=11FT, 3in=12FT, 3-1/2in=13FT, 4in=14FT, 5in=16FT, 6in=17FT. Recommended Spacing for Tubing: 1/4in-1/2in = 3FT, 5/8in-7/8in=4FT, 1in=5FT, 1-1/4in-1-1/2in=7FT. Temperature Ratings: Polypropylene -22F to 194F. Polyamide -40F to 284F. Aluminum -40F to 500F. Note: Hose may be clamped using smooth body I.D. style clamps. MM size x .03937 = Inch size.
Fluid Conveying
SPAL*DPALAS Single Weld Plate Hex Head Bolts with Cover Plate
SPAL*DPALAS Stauff Clamps

Catalog Part No. Stauff Model MM Inch Inch Size Tube Pipe Tube (mm) Size Size Size Group 13.7 21.3 22 26.7 26.9 33.4 33.7 42.2 44.5 48.3 48.3 60.3 60.3 60 60 1-1/2 1-1/2 2 2 42 1-1/4 1 3/4 1/4 1/2 0.54 0.84 0.87 1.05 1.06 1.31 1.33 1.66 1.75 1.90 1.90 2.37 2.37 3s 4s 4s 4s 4s 5s 5s 5s 6s 6s 6s 6s 6s Body Material Body I.D. Indiv. B2 H2 H3 I1 Pkg. (in) (in) (in) (in) Wt. Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 1.18 2.17 0.95 2.17 0.69 1.18 2.80 1.27 2.77 0.90 1.18 2.80 1.27 2.77 0.70 1.18 2.80 1.27 2.77 0.90 1.18 2.80 1.27 2.77 0.85 1.25 3.28 1.50 3.34 0.75 1.25 3.28 1.50 3.34 1.05 1.25 3.28 1.50 3.34 1.04 1.75 4.61 2.17 4.53 1.75 4.61 2.17 4.53 2.73 1.75 4.61 2.17 4.53 2.70 1.75 4.61 2.17 4.53 2.61 1.75 4.61 2.17 4.53 2.61 Price Each
C1JD89 SPAL3137SPPHDPAL C1EF29 SPAL4213SPPDPALA C1KN50 SPAL4022PPHDPALASM W15 C1EF31 SPAL4267SPPDPALA 856238 C1JM79 (SPAL40269PPDPALASU W15K) C1EF33 SPAL5334SPPDPALA C1JM71 834150 C1EF34 SPAL5422SPPDPALA C1KN51 SPAL60445PPHDPALAS MW1 C1KK88 834152 C1EF35 SPAL6483SPPDPALA SPAL6603SPPDPALAS-B C1HS73 AG 834153 C1JM72 (SPAL60603PPDPALASU W15K)
Polypropylene Smooth Polypropylene Profiled Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled
1106
Support Clamps
Pipe & Tubing Support Clamps Stauff Heavy Series
SPAL*DPALAS Stauff Clamps
Catalog Part No. Stauff Model MM Inch Inch Size Tube Pipe Tube (mm) Size Size Size Group 88.9 88.9 114 3 3 4 3.50 3.50 4.49 7s 7s 8s Body Material Body I.D. Indiv. B2 H2 H3 I1 Pkg. (in) (in) (in) (in) Wt. Yes Yes Yes 2.25 5.91 2.75 5.98 5.20 2.25 5.91 2.75 5.98 5.08 3.00 8.28 3.86 8.08 10.0 0 Price Each
C1EF38 SPAL7889SPPDPALA 834154 C1JM73 (SPAL70889PPDPALASU W15K) C1JM74 834155
Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled
Models ending in W12K: Weld plate & cover plate phosphated, bolts untreated. Models ending in W15K: Weld plate & cover plate phosphated, bolts zinc plated.
AF*SIP Stacking Bolts and Safety Plates
AF*SIP Stauff Clamps

Catalog Part No. C1EA14 Stauff Model AF5422SPPSIP-BAG Inch Inch Size Pipe Tube (mm) Size Size Group 42.2 1-1/4 1.66 5s Body Material Polypropylene Body I.D. Profiled B2 H1 I1 Indiv. Pkg. (in) (in) (in) Yes 1.25 2.38 3.34 Wt. 0.60 Price Each
Fluid Conveying
*PP Clamp Body (Both Halves)
*PP Stauff Clamp Bodies

Catalog Part No. C1DY79 C1DZ81 C1DZ85 C1JF11 Stauff Model 6635SPPP-BAG/TAG 7762SPP-BAG/TAG 8127SPP-BAG/TAG 9168S-PP-BAG Inch Inch Size Pipe Tube (mm) Size Size Group 63.5 76.2 127 168.0 6 2.50 3.00 5.00 6.61 6s 7s 8s 9s Body Material Polypropylene Polypropylene Polypropylene Polypropylene Body I.D. Profiled Profiled Profiled Profiled B2 H1 I1 Indiv. Pkg. (in) (in) (in) Yes Yes Yes Yes 1.75 3.55 4.53 2.25 4.73 5.98 3 6.70 8.08 3.50 7.88 9.84 Wt. 0.20 0.47 0.92 2.67 Price Each
1107
Support Clamps
Pipe & Tubing Support Clamps Stauff Twin Series

Features: For equal or unequal outside diameters from 1/4" to 1-1/2". Weld plate style available for single and group. Rail mounting style available for all sizes. Clamp material available in polypropylene and polyamide. Recommended Spacing for Pipe: 1/4in=3FT, 3/8in=4FT, 1/2in=4FT, 3/4in=5FT, 1in=7FT, 1-1/4in=8FT. Recommended Spacing for Tubing: 1/4in-1/2in = 3FT, 5/8in-7/8in=4FT, 1in=5FT, 1-1/4in-1-1/2in=7FT. Temperature Ratings: Polypropylene -22F to 194F. Polyamide -40F to 284F. Aluminum -40F to 500F. Note: Hose may be clamped using smooth body I.D. style clamps. MM size x .03937 = Inch size.
Fluid Conveying
SPDS*GDAS Single Weld Plate Hex Head Bolts with Cover Plate SPDS*GDAS Stauff Clamps
Catalog Part No. Inch Inch Inch Hose Size Pipe Tube O.D. (mm) Size Size Size Group 9.5 12.7 12.7 13.4 15 16 17.1 17.4 19.5 19 20.5 21.3 22.2 22 26.6 27.8 3/4 1/2 7/8 7/8 3/4 3/4 3/8 5/8 3/8 1/2 1/2 0.37 0.50 0.50 0.53 0.59 0.63 0.67 0.69 0.77 0.75 0.81 0.84 0.87 0.87 1.05 1.09 2D 2D 2D 3D 2D 2D 2D 3D 3D 3D 3D 3D 3D 3D 4D 5D Body Material Body I.D. Indiv. Pkg. Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes No Yes Yes B2 H2 H3 I1 (in) (in) (in) (in) Wt. 1.19 1.73 0.91 2.13 0.31 1.19 1.73 0.91 2.13 0.29 1.19 1.73 0.91 2.13 0.50 1.19 2.17 0.92 2.64 0.42 1.19 1.73 0.91 2.08 0.29 1.19 1.73 0.91 2.13 0.30 1.19 1.73 0.72 2.13 0.28 1.19 2.17 0.92 2.64 0.41 1.19 2.17 0.92 2.64 0.39 1.19 2.17 0.92 2.63 0.90 1.19 2.17 0.92 2.64 0.41 1.19 2.17 0.92 2.64 0.39 1.19 2.17 0.92 2.64 0.39 1.19 2.17 0.92 2.64 0.40 1.19 2.36 1.03 3.16 0.43 1.19 2.84 1.25 4.09 0.69 Price Each
Stauff Model
C1EU95 SP2095/095DPPGDA C1ZU61 SPDS2127/127PPGD C1EF12 SP2127/127DPPGDA C1ZS98 SP3134/134DPPHGD C1KN41 SP215/15PPHGDASM C1JD88 SP2160/160DPPGDA C1EF91 SPDS2171/171PPGD C1ZS96 SP3174/174DPPHGD C1EU96 SP3190/190DPPGDA C1KN43 SP319/19PPHGDASMW 10 C1ZS94 SP3205/205DPPHGD C1EU97 SP3213/213DPPGDA C1EU98 SP3222/222DPPGDA C1EF39 SPDS3222/222PPGD C1EP18 SPDS4266/266PPGD C1ZS92 SP5278/278DPPHGD
Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth Polypropylene Profiled Polypropylene Smooth Polypropylene Smooth Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Profiled Polypropylene Smooth
1108
Support Clamps
Pipe & Tubing Support Clamps Stauff Twin Series
SPDS*GDAS Stauff Clamps
Catalog Part No. Inch Inch Inch Hose Size Pipe Tube O.D. (mm) Size Size Size Group 28.0 35.7 1.10 1.41 4D 5D Body Material Body I.D. Indiv. Pkg. Yes Yes B2 H2 H3 I1 (in) (in) (in) (in) Wt. 1.19 2.36 1.03 3.16 0.46 1.19 2.84 1.25 4.09 0.65 Price Each
Stauff Model
C1HG82 SP4280/280DPPHGD C1ZS90 SP5357/357DPPHGD
Polypropylene Smooth Polypropylene Smooth
Miscellaneous Stauff Twin Series Parts

Catalog Part No. C1KE61 C1KG73 Stauff Model 3205/205PPH SI2-5DW3 Description Clamp Body (2 Halves), Polypropylene, Group 3, Smooth Bore 21.5mm (0.846 inches) Safety Locking Plate, Groups 2D thru 5D, Carbon Steel Zinc Plated Wt. 0.10 0.01 Price Each
1109
Swivel Joints
FS65 Series Standard Duty Balanced Pressure

Aeroquip FS65 Balanced-Pressure Series swivel joints answer customer requests for a more cost competitive, compact product. They feature compact forged castings that are less expensive to manufacture than brazing castings. Their balanced-pressure design distributes pressure evenly through the body of the joints, eliminating axial loading of the sleeve. The pressure-balanced design allows the swivel joints to rotate with very low torque - even up to their rated operating pressure. Features: Balanced-pressure design Low-drop dimensions Contamination seals 360 rotation Standard o-ring design and repair kits. Pressure Ratings: 5000 PSI (Sizes 1/4 and 3/8), 3500 PSI (Sizes 1/2 and 5/8), 3500 PSI (Size 3/4), 3000 PSI (Size 1 inch). Seal Options: Suffix -01 Buna-N (Standard). Suffix -04 EPR. Suffix -06 Viton.
Fluid Conveying
Catalog Part No.
Aeroquip Model
Nom. Size Casing Thread 1/4 3/8 1/2 3/4 1 1/4-18 NPSM 3/8-18 NPSM 1/2-14 NPSM 3/4-14 NPSM 1-11-1/2 NPSM
Sleeve Thread 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2
A (in)
B (in)
C (in)
Wt. 0.76 0.75 1.03 1.86 3.06
Price Each
C1FH43 FS65000-0404-01 C1FH44 FS65000-0606-01 C1FH45 FS65000-0808-01
2.60 1.49 1.45 2.53 1.48 1.45 2.88 1.54 1.62 3.21 1.89 2.14 3.91 2.27 2.40
C1FH46 FS65000-1212-01 C1FK62 FS65000-1616-01
FS65000 Female Pipe Swivel / Male Pipe
Catalog Part No.
Aeroquip Model
Nom. Size Casing Thread 1/4 1/2 3/4 1/4-18 NPSM 1/2-14 NPSM 3/4-14 NPSM
Sleeve Thread 1/4-18 1/2-14 3/4-14
A (in)
B (in)
C (in)
Wt. 0.80 1.14 1.87
Price Each
C1FH47 FS65005-0404-01
2.49 1.59 1.45 3.14 1.97 1.62 3.21 2.08 2.14
C1FH49 FS65005-0808-01 C1FH50 FS65005-1212-01
FS65005 Female Pipe Swivel / Female Pipe
1110
Swivel Joints
FS65 Series Standard Duty Balanced Pressure
Catalog Part No. C1KL98 Aeroquip Model FS65007-0808-01 Nom. Size Casing Thread 1/2 1 1/2-14 1-11-1/2 Sleeve Thread 1/2-14 1-11-1/2 A (in) B (in) C (in) Wt. 1.01 3.04 Price Each
2.88 1.54 1.88 3.91 2.27 2.62
C1FK64 FS65007-1616-01
FS65007 Female Pipe / Male Pipe
Catalog Part No.
Aeroquip Model
Nom. Size Casing Thread 3/8 1/2 1 3/8-18 1/2-14 1-11-1/2
Sleeve Thread 3/8-18 1/2-14 1-11-1/2
A (in)
B (in)
C (in)
Wt. 0.75 1.13 3.00
Price Each
C1FH52 FS65008-0606-01 C1FH53 FS65008-0808-01 C1FK65 FS65008-1616-01
2.49 1.58 1.59 3.14 1.97 1.88 3.84 2.53 2.62
FS65008 Female Pipe (Fixed) / Female Pipe

Catalog Part No. Nom. Size Casing Thread 3/4 1-1/16-12 Sleeve Thread 1-1/16-12 A (in) B (in) C (in) Price Each
Fluid Conveying
Aeroquip Model
Wt. 1.79
C1GF12 FS65009-1212-01
3.28 2.16 2.36
FS65009 Male 37 Flare / Male SAE O-Ring Boss
1111
Swivel Joints
FS5900 Series Heavy Duty Full Flow

Features: The Aeroquip FS5900 Series swivel joint is designed for 25 in./Hg vacuum to 5000 psi operating pressure service made possible by advanced design needle bearings and seals. In addition to high pressures the FS5900 Series provides full fluid flow with minimal pressure drop. The excellent corrosion resistance of the FS5900 Series is made possible by the plated steel components. Both field and laboratory testing have proven the FS5900 Series swivel joints can withstand greater side loads than conventional swivel joints. High pressure impulse life has also been improved. Pressure Ratings: 5000 PSI all sizes. Standard Seals: Suffix -01 (1/4 inch size only) Buna-N O-Rings, -40F to 250F. Suffix -75 (3/8 through 1 inch) Hytrel/Buna-N U-Cups, -20F to 250F. Optional Seals: EPR, Viton in 1/4 inch size. Urethane/Buna-N in 3/8 through 1 inch sizes.
Fluid Conveying
Catalog Part No.
Aeroquip Model
Nom. Size 3/4
Thread P 3/4-14
Thread T 1-1/16-12
A (in) 4.15
Wt. 1.89
Price Each
C1CW72 FS59005-1212-75
FS59005 Female Pipe / Male 37 JIC
1112
Air Brake Products

Air Brake Air Chamber Hose Lines
Construction: H338 Air Brake Hose with synthetic inner tube, multi-fiber spiral reinforcement, perforated synthetic cover. Rigid male pipe on one end. Swivel male pipe adapter on other end. Application: Air brake air chamber hose lines. Operating Temperature Range: -40F to +200F. 3/8 Inch Hose Assemblies: H33806 Hose with 3/4 inch O.D., 225 PSI Working Pressure, 900 PSI Burst Pressure, 3-1/2 inch Minimum Bend Radius. 1/2 Inch Hose Assemblies: H33808 Hose with 7/8 inch O.D., 225 PSI Working Pressure, 900 PSI Burst Pressure, 4 inch Minimum Bend Radius. Custom Hose Lengths: Aeroquip 2570 Air Brake Hose page 740 Aeroquip FC350 Hose page 739 Air Brake Air Chamber Hose Lines
Catalog Part No. Eaton Model Hose I.D. (in) 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Configuration 1/4 Male Pipe x 1/4 Male Pipe Swivel Adapter x 3/8 Hose 1/4 Male Pipe x 1/4 Male Pipe Swivel Adapter x 3/8 Hose 1/4 Male Pipe x 1/4 Male Pipe Swivel Adapter x 3/8 Hose 1/4 Male Pipe x 1/4 Male Pipe Swivel Adapter x 3/8 Hose 1/4 Male Pipe x 1/4 Male Pipe Swivel Adapter x 3/8 Hose 1/4 Male Pipe x 1/4 Male Pipe Swivel Adapter x 3/8 Hose 3/8 Male Pipe x 3/8 Male Pipe Swivel Adapter x 1/2 Hose 3/8 Male Pipe x 3/8 Male Pipe Swivel Adapter x 1/2 Hose 3/8 Male Pipe x 3/8 Male Pipe Swivel Adapter x 1/2 Hose 3/8 Male Pipe x 3/8 Male Pipe Swivel Adapter x 1/2 Hose 3/8 Male Pipe x 3/8 Male Pipe Swivel Adapter x 1/2 Hose 3/8 Male Pipe x 3/8 Male Pipe Swivel Adapter x 1/2 Hose 3/8 Male Pipe x 3/8 Male Pipe Swivel Adapter x 1/2 Hose L (in) 20-3/8 24-1/8 28-3/8 34-3/8 36-1/8 41-1/8 18 24 28-3/8 30 34-3/8 36 41-1/8 Wt. 6.00 2.00 4.00 8.00 7.00 Price Each C1ER66 W28539 C1ER64 W28472 C1ER65 W28473 C1ER69 W28554 C1ER70 W28555 C1ER71 W28559 C1ER78 W86471 C1ER79 W86472 C1ER80 W86473 C1ER82 W86550 C1ER84 W86554 C1ER85 W86555 C1ER86 W86559 Note: Swivel adapter is included.
10.00 0.62 4.00 7.00 0.84 10.00 20.00 6.00
1113
Air Brake Products

Gladhand Couplings
Features: Die-cast aluminum body. 1/2 inch female pipe thread. Conforms to SAE J318. Gladhand Couplings
Catalog Part No. Model Description SERVICE (Signal) Connects only to Service. UNIVERSAL (Connects to all styles). Meets MS35746-1. Gladhand Seal. Used in Models W78850, W78851, W76150. Wt. 0.40 0.39 0.02 Price Each
C1ER76 W78850 C1ER75 W75150 C1ER60 W14630
Fluid Conveying
1114
Performance Products
Category Page Category Page Hydraulic Power & Control Hose & Fittings AQP Racing Hose . . . . . . . . . . . . . . . . . . . . . 1116 StartLite Racing Hose . . . . . . . . . . . . . . . . . . 1116 AQP SOCKETLESS Hose . . . . . . . . . . . . . 1117 FBF A/C Hose. . . . . . . . . . . . . . . . . . . . . . . . . . 1118 Teflon Racing Hose . . . . . . . . . . . . . . . . . . . . 1118 AQP High Pressure Hose . . . . . . . . . . . . . . . 1119 Reusable Fittings for AQP Racing Hose & StartLite Racing Hose . . . . . . . . . . . . . . . . . 1120 Crimp Fittings for AQP Racing Hose & StartLite Racing Hose . . . . . . . . . . . . . . . . . . . . . . . . . 1123 Fittings for AQP SOCKETLESS Hose . . . . 1124 Reusable Fittings for Aeroquip FBF A/C Hose . 1127 Fittings for Teflon Racing Hose . . . . . . . . . . . 1128 Fittings for AQP High Pressure Hose. . . . . . . 1130 Adapters AN Flare Adapters . . . . . . . . . . . . . . . . . . . . . . 1132 O-Ring Boss Adapters . . . . . . . . . . . . . . . . . . . 1135 AN Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . . 1135 AN Flare Bulkhead Adapters . . . . . . . . . . . . . . 1136 AN Flare to Pipe Adapters . . . . . . . . . . . . . . . . 1137 High Pressure Adapters . . . . . . . . . . . . . . . . . . 1139 Metric Adapters. . . . . . . . . . . . . . . . . . . . . . . . . 1139 Pipe Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . 1140 Aluminum Tank Welding Bungs . . . . . . . . . . . . 1142 Special Flare Adapters . . . . . . . . . . . . . . . . . . . 1142 Brake System Adapters Inverted Flare Brake Adapters . . . . . . . . . . . . . 1143 SAE Banjo Brake Adapters. . . . . . . . . . . . . . . . 1144 Metric Brake Adapters . . . . . . . . . . . . . . . . . . . 1144 Metric Banjo Brake Adapters . . . . . . . . . . . . . . 1144 Fuel System Components Aluminum Carburetor Adapters . . . . . . . . . . . . 1146 Aluminum Fuel Pump Adapters . . . . . . . . . . . . 1147 JIC 37 Male Flare to 42 Inverted Flare . . . . . 1147 Aluminum Fuel Blocks . . . . . . . . . . . . . . . . . . . 1147 Aluminum In-Line Fuel Pressure Adapters . . . . 1147 Metric Banjo Hose Barbs . . . . . . . . . . . . . . . . . 1148 Metric Banjo Bolts. . . . . . . . . . . . . . . . . . . . . . . 1148 BSP Banjo Bolts . . . . . . . . . . . . . . . . . . . . . . . . 1149 Couplings Quick-Drain Oil Pan Couplings . . . . . . . . . . . . . 1150 Quick-Disconnect Radiator/Cooling Refill Couplings 1150 Pressure Sense Couplings . . . . . . . . . . . . . . . . 1151 Hydraulic Couplings . . . . . . . . . . . . . . . . . . . . . 1152 Fuel Check Couplings. . . . . . . . . . . . . . . . . . . . 1153 PRO CLAMP and Overbraid PRO CLAMP Aluminum Hose Connectors . . 1154 Stainless Steel Overbraid . . . . . . . . . . . . . . . . . 1154 Accessories Support Clamps . . . . . . . . . . . . . . . . . . . . . . . . 1155 Replacement Aluminum Crushwashers . . . . . . 1155 Firesleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1156 Silicone Reducers . . . . . . . . . . . . . . . . . . . . . . . 1156 Assembly Equipment Vise-Jaw Inserts for Anodized Fitting Protection 1157 Hose Assembly Lube . . . . . . . . . . . . . . . . . . . . 1157 Hand-Held Hose Cutter. . . . . . . . . . . . . . . . . . . 1158 SOCKETLESS Fitting Assembly Tool . . . . . . 1158
WARNING
EATON FITTING TOLERANCES ARE ENGINEERED TO MATCH EATONS AEROQUIP HOSE TOLERANCES. THE USE OF EATON FITTINGS ON HOSE SUPPLIED BY OTHER MANUFACTURERS AND/OR THE USE OF EATONS AEROQUIP HOSE WITH FITTINGS SUPPLIED BY OTHER MANUFACTURERS MAY RESULT IN THE PRODUCTION OF UNRELIABLE AND UNSAFE HOSE ASSEMBLIES AND IS NEITHER RECOMMENDED NOR AUTHORIZED BY EATON CORPORATION OR ANY OF ITS AFFILIATES OR SUBSIDIARIES.
WARNING
APPLICATION CONSIDERATIONS MUST BE OBSERVED IN SELECTING APPROPRIATE COMPONENTS FOR THE APPLICATION OF THESE PRODUCTS CONTAINED HEREIN. THE FAILURE TO FOLLOW THE RECOMMENDATIONS SET FORTH IN THIS CATALOG MAY RESULT IN AN UNSTABLE APPLICATION WHICH MAY RESULT IN SERIOUS PERSONAL INJURY OR PROPERTY DAMAGE. EATON CORPORATION OR ANY OF ITS SUBSIDIARIES SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGATIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSEQUENTIAL, INCIDENTAL AND CONTINGENT DAMAGES) ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE AEROQUIP HOSE FITTINGS, HOSE AND AEROQUIP APPROVED EQUIPMENT, AND IN CONFORMANCE WITH EATONS AEROQUIP PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY. Failure to follow these processes and product instructions and limitations could lead to premature hose assembly failures resulting in property damage, Routing If the user will follow the recommendations on hose line routing and installation on page 1364 , improved safety and longer service life of any hose installation will result.
1115
Hose & Fittings
FBA
AQP Racing Hose Stainless Steel Braid
Construction: AQP elastomer tube, partial stainless steel wire inner braid and a full stainless steel outer braid reinforcement. Temperature Range: Continuous operating temperature from -55F to +300F. Application: Fuel, Lube, Coolant, Air. FBA hose (with FBM reusable fittings) is an SAE J1942-1 (June 2005) qualified hose for marine fuel lines on commercial vessels, firesleeve required on sizes -04 -06 -08, firesleeve not required on sizes -10 thru -20. Reusable Fittings: page 1120 Crimp Fittings: page 1123 Note: For vacuum applications do not exceed Minimum Bend Radius. FBA
Catalog Part No. C1CP58 C1CP59 C1CP60 C1CP61 Hose I.D. Hose (in) O.D. (in) 0.22 0.34 0.44 0.56 0.69 0.88 1.13 0.44 0.55 0.65 0.80 0.94 1.15 1.41 Maximum Operating Pressure (psi) 1000 1000 1000 1000 1000 750 500 Minimum Bend Radius (in) 2.0 2.50 3.5 4 4.5 5.5 8 Vacuum Service (in/Hg) 28 28 28 28 28 28 28 Wt. (per ft) 0.11 0.16 0.17 0.21 Price (per ft)
Aeroquip Model FBA0400 FBA0600 FBA0800 FBA1000
Hose Dash Size -04 -06 -08 -10 -12 -16 -20
Fluid Conveying
C1CP62 FBA1200 C1CP63 FBA1600 C1CP64 FBA2000
0.29 0.38 0.49
FBU
StartLite Racing Hose Light Weight
StartLite Racing Hose utilizes a fire-retardant Nomex cover and Aeroquip's patented AQP elastomer inner tube, resulting in an extremely lightweight product. For ultimate weight savings, use aluminum crimp style swivel fittings, which are available in sizes -04 through -20, and are crimped using the Aeroquip ProCrimp assembly machine. For ultimate field serviceability, choose Aeroquip's high quality reusable fittings. Construction: AQP elastomer inner tube and Nomex blue cover. Temperature Range: -45F to 300F. Application: Fuel, lube, coolant, air. NOT recommended for marine fuel lines. Reusable Fittings: page 1120 Crimp Fittings: page 1123 ProCrimp 1380 Crimper: page 753 FBU
Catalog Part No. Hose Dash Hose I.D. Hose Aeroquip Model Size (in) O.D. (in) -04 -06 -08 -10 0.22 0.34 0.44 0.56 0.43 0.55 0.64 0.80 Maximum Operating Pressure (psi) 200 200 200 200 Minimum Bend Radius (in) 2.00 2.50 3.50 4.00 Vacuum Service (in/Hg) 20 20 20 20 Wt. (per ft) 0.05 0.08 0.11 0.14 Price (per ft)
C1ZV73 FBU0400 C1ZV72 FBU0600 C1ZV71 FBU0800 C1ZV70 FBU1000
1116
Hose & Fittings

FBU
Catalog Part No. Hose Dash Hose I.D. Hose Aeroquip Model Size (in) O.D. (in) -12 16 0.69 0.88 0.93 1.15 Maximum Operating Pressure (psi) 100 (Reusable) 200 (Crimp) 100 (Reusable) 200 (Crimp) Minimum Bend Radius (in) 4.50 5.50 Vacuum Service (in/Hg) 20 20 Wt. (per ft) 0.16 0.20 Price (per ft)
C1ZV69 FBU1200 C1ZV68 FBU1600
FC332
AQP SOCKETLESS Hose Low Pressure
AQP SOCKETLESS hose and fittings are extremely easy to work with. Simply push the hose onto the fitting. It's that simple. Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover. Application: For gasoline, fuel and lubricating oils, air and water. NOT recommended for marine fuel lines. Not recommended for hydraulic impulse applications, and is not approved for air brake applications. Operating Temperature Range: -40F to +300F. Water not to exceed +180F. Air not to exceed +250F. Reusable Fittings: page 1124 FC332
Catalog Part No. C1CR67 C1CR68 C1CR69 C1CR70 Hose I.D. Hose (in) O.D. (in) 0.25 0.38 0.50 0.63 0.75 0.49 0.63 0.75 0.91 1.04 Maximum Operating Pressure (psi) 250 250 250 250 250 Minimum Bend Radius (in) 3 3 5 6 7 Vacuum Service (in/Hg) 28 28 28 18 18 Wt. (per ft) 0.08 0.12 0.14 0.19 0.25 Price (per ft)
Fluid Conveying
Aeroquip Model FC332-06 FC332-08 FC332-10 FC332-12
Hose Dash Size -04 -06 -08 -10 -12
C1CR66 FC332-04
1117
Hose & Fittings
FBF
A/C Hose Nylon Tube Stainless Steel Braid
This new and innovative product offers discriminating motorsport enthusiasts a superior hose and fitting combination specifically designed for A/C component applications. This attractive hose has a stainless steel braid with a nylon inner tube for superior refrigerant performance. Custom designed nickel plated steel reusable fittings, with available charge ports, are an eye appealing compliment to complete these field serviceable hose assemblies. Application: A/C. Reusable Fittings: page 1127 Lubricant Selection: Always be sure to use the correct lubricant to assemble hoses for your A/C system. Most R-12 systems use mineral oil, while most R-134a systems use a synthetic lubricant called Polyalkylene Glycol (PAG). FBF
Catalog Part No. Hose I.D. Hose (in) O.D. (in) 0.33 0.43 0.53 0.44 0.54 0.63 Maximum Operating Pressure (psi) 500 500 500 Minimum Bend Radius (in) 4.00 5.25 6.50 Vacuum Service (in/Hg) Wt. (per ft) 0.08 0.10 0.14 Price (per ft)
Aeroquip Model
Hose Dash Size -06 -08 -10
C1GC58 FBF0600 C1GC59 FBF0800 C1GC60 FBF1000
Fluid Conveying
2807
Teflon Racing Hose Teflon Tube Stainless Steel Braid
Teflon Racing Hose is made with an extruded Teflon inner tube that's compatible with a wide range of fluids, including hydraulic brake fluids. The hose has a bright stainless steel wire-braid cover that resists abrasion and corrosion, providing optimum dependability. Application: Offroad brake, transmission, clutch, gauge, NO, power steering, hydraulic and air conditioning. Construction: Extruded Teflon inner tube with stainless steel wire-braid cover. Operating Temperature Range: -100F to 450F. Reusable Fittings: page 1128 2807
Hose Dash Hose I.D. Hose (in) O.D. (in) Aeroquip Model Size 2807-3 2807-4 2807-8 -03 -04 -08 0.14 0.19 0.42 0.25 0.30 0.54 Minimum Bend Radius (in) 1.50 2.0 5.25 Vacuum Service (in/Hg) 28 28 28
Catalog Part No. C1BJ83 C1BJ84 C1BJ87
Maximum Operating Pressure (psi) 3000 3000 2000
Wt. (per ft) 0.04 0.06 0.12
Price (per ft)
1118
Hose & Fittings
FC300
AQP High Pressure Hose Power Steering
AQP High Pressure Hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications. It has a blue abrasion resistant fabric cover and a patented AQP synthetic inner tube. It uses standard steel and brass reusable fittings. Application: Power steering lines, hydraulics, air, gasoline, fuel and lubricating oils, over-the-wall air tools and DOT-approved air brake. Construction: AQP elastomer tube, polyester inner braid, single wire braid reinforcement and blue polyester braid cover. Operating Temperature Range: -55F to +300F except air +250F Reusable Fittings: page 1130 FC300
Catalog Part No. C1CR47 C1CR48 C1CR49 C1CR50 Hose Dash Hose I.D. Hose Aeroquip Model Size (in) O.D. (in) FC300-06 FC300-08 FC300-10 FC300-12 -06 -08 -10 -12 0.31 0.41 0.50 0.62 0.67 0.76 0.93 1.08 Maximum Operating Pressure (psi) 2250 2000 1750 1500 Minimum Bend Radius (in) 4 4.62 5.5 6.5 Vacuum Service (in/Hg) 28 28 28 28 Wt. (per ft) 0.23 0.26 0.37 0.44 Price (per ft)
Fluid Conveying
1119
Hose & Fittings
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Cut-Off Price Hose & Fitting Dash Size (in) Wt. Each -06 -06 -08 -08 -10 -12 -16 -20 1.21 1.21 1.34 1.34 1.46 1.54 1.73 1.94 0.05 0.05 0.08 0.08 0.12 0.18 0.50 0.44
Catalog Part No. Aeroquip Model C1CP76 FBM1012 C1KL54 FBM4412
Red/Blue Anodized Aluminum C1CP77 FBM1013 37 Flare Swivel C1KL55 FBM4413

C1CP78 FBM1014 C1CP79 FBM1015 C1CP80 FBM1016 C1CP81 FBM1017
Note: Part numbers that start with FBM44 are anodized black, all others are anodized red/blue. Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Cut-Off Price Hose & Fitting Dash Size Wt. (in) Each -06 -08 1.21 1.34 0.06 0.09
Catalog Part No. Aeroquip Model C1ZW87 FBE1012 C1ZW86 FBE1013
Nickel-Plated Aluminum 37 Flare Swivel
Fluid Conveying
Catalog Part No. Aeroquip Model C1CP75 FBM1011 C1EA57 FBM1076
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Cut-Off Price Hose & Fitting Dash Size (in) Wt. Each -04 -08 1.05 1.34 0.25 0.17
Red/Silver Plated Steel 37 Flare Swivel
Catalog Part No.
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Adjustable End Wt. Size (in) Each -06 -12 -16 -20 Yes Yes Yes No 0.08 0.25 0.33 0.41
C1ZW29 FBM4072 C1ZW27 FBM4075
Red/Blue Anodized Aluminum C1ZW26 FBM4076 37 Flare Swivel, 30 Elbow C1ZW50 FBM1147
Catalog Part No.
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Size Adjustable End (in) Wt. Each -06 -06 -08 -08 -10 -10 -12 -12 -16 Yes Yes Yes Yes Yes Yes Yes Yes Yes 1.62 1.62 1.67 1.67 1.73 1.73 1.92 1.92 2.06 0.08 0.08 0.13 0.13 0.16 0.16 0.24 0.24 0.34
C1CQ71 FBM4022 C1KL57 FBM4422
Red/Blue Anodized Aluminum C1CQ72 FBM4023 37 Flare Swivel, 45 Elbow C1KL58 FBM4423
C1CQ73 FBM4024 C1KL59 FBM4424 C1CQ74 FBM4025 C1KL60 FBM4425 C1EC49 FBM4026
1120
Hose & Fittings

Note: Part numbers that start with FBM44 are anodized black, all others are anodized red/blue. Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Adjustable End Wt. Size (in) Each -06 -08 -10 Yes Yes Yes 1.62 1.67 1.73 0.08 0.13 0.17
Catalog Part No.
C1ZW59 FBE4022 C1ZW58 FBE4023
Nickel-Plated Aluminum 37 Flare Swivel, 45 Elbow
C1ZW57 FBE4024
Catalog Part No.
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Adjustable End Wt. Size (in) Each -04 No 1.01 0.07
C1EA50 FBM1021
Red/Silver Plated Steel 37 Flare Swivel, 45 Elbow

Catalog Part No. Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Size Adjustable End (in) Wt. Each -06 -08 -10 -12 Yes Yes Yes Yes 0.08 0.14 0.18 0.26
Fluid Conveying
Red/Blue Anodized Aluminum 37 Flare Swivel, 60 Elbow C1ZW22 FBM4085
C1ZW23 FBM4084
Catalog Part No. C1CQ75 C1CQ76
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Size Adjustable End (in) Wt. Each FBM4032 FBM4033 -06 -06 -08 -08 -10 -10 -12 -12 -16 Yes Yes Yes Yes Yes Yes Yes Yes Yes 1.47 1.47 1.45 1.45 1.56 1.56 1.79 1.79 1.96 0.08 0.08 0.13 0.13 0.17 0.17 0.25 0.25 0.35
C1KL61 FBM4432 C1KL62 FBM4433
Red/Blue Anodized Aluminum C1CQ77 FBM4034 37 Flare Swivel, 90 Elbow C1KL63 FBM4434
C1CQ78 FBM4035 C1KL64 FBM4435 C1CQ79 FBM4036
Note: Part numbers that start with FBM44 are anodized black, all others are anodized red/blue.
Catalog Part No.
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Size Adjustable End (in) Wt. Each -06 -10 Yes Yes 1.47 1.56 0.08 0.18
1121
Hose & Fittings
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Size Adjustable End (in) Wt. Each -04 -06 -08 No No No 0.90 1.05 1.25 0.09 0.11 0.19
Catalog Part No.
C1CP82 FBM1031 C1EA60 FBM1083 C1EA61 FBM1084
Red/Silver Plated Steel 37 Flare Swivel, 90 Elbow

Catalog Part No. Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Size Adjustable End (in) Wt. Each -06 -08 -10 -12 -16 Yes Yes Yes Yes Yes 1.19 1.16 1.23 1.42 0.08 0.13 0.01 0.25 0.38
C1EC50 FBM4042 C1EC51 FBM4043 C1EC52 FBM4044 C1EC53 FBM4045
Red/Blue Anodized Aluminum 37 Flare Swivel, 120 Elbow
C1ZW31 FBM4046
Catalog Part No.
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Adjustable End Wt. Size (in) Each -06 -08 -12 -16 Yes Yes Yes Yes 0.86 0.82 0.91 0.08 0.13 0.26 0.41
Fluid Conveying
C1EC54 FBM4052 C1EC55 FBM4053 C1EC57 FBM4055 C1ZW30 FBM4056

Catalog Part No.
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Aeroquip Model Adjustable End Wt. Size (in) Each -06 -08 -10 -12 Yes Yes Yes Yes 0.55 0.51 0.44 0.42 0.08 0.14 0.01 0.28
C1EC58 FBM4062 C1EC59 FBM4063 C1EC60 FBM4064 C1EC61 FBM4065
Reusable Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Replacement Catalog Aeroquip Fitting Price Crush Part No. Model Dash Size Application Wt. Each Washer C1EA55 FBM1070 -06 Banjo Fitting for Solex Carburetors with 12mm x 1.25 thread. FBM3627 0.01
Red/Blue Anodized Aluminum Note: Crushwashers page 1155 Banjo
1122
Hose & Fittings
Crimp Fittings for AQP Racing Hose & StartLite Racing Hose
Crimp Fittings for AQP Racing Hose & StartLite Racing Hose Cut-Off Price Hose & Fitting Dash Size / Notes (in) Wt. Each -04 -06 -08 -10 0.02 0.03 0.05 0.07
Catalog Part No.
Aeroquip Model
C1ZW14 FBM4211
Red/Silver Anodized Aluminum C1ZW12 FBM4213 37 Flare Swivel

Catalog Part No.
Aeroquip Model
Crimp Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Size / Adjustable Cut-Off Price Notes End (in) Wt. Each -04 (This is a STEEL fitting) -06 -08 -10 -12 -16 -20 No Yes Yes Yes Yes Yes No 0.05 0.06 0.10 0.13 0.21 0.26 0.30
C1ZW20 FBM4121 C1ZV96 FBM4222
Red/Silver Anodized Aluminum 37 Flare Swivel, 45 Elbow C1ZV94 FBM4224

C1ZV93 FBM4225 C1ZV92 FBM4226 C1ZW19 FBM4127
C1ZV95 FBM4223
Fluid Conveying
Catalog Part No.
Aeroquip Model
Crimp Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Size / Adjustable Cut-Off Price Wt. Notes End (in) Each -04 (This is a STEEL fitting) -06 -08 -10 -12 -20 No Yes Yes Yes Yes No 0.06 0.06 0.11 0.14 0.22 0.32
C1ZW18 FBM4131
C1ZV91 FBM4232 C1ZV90 FBM4233
Red/Silver Anodized Aluminum C1ZV89 FBM4234 37 Flare Swivel, 90 Elbow C1ZV88 FBM4235
C1ZW17 FBM4137
Catalog Part No.
Aeroquip Model
Crimp Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Size / Adjustable Cut-Off Price Notes End (in) Wt. Each -10 Yes 0.14
C1ZV79 FBM4254
Red/Silver Anodized Aluminum 37 Flare Swivel, 150 Elbow
1123
Hose & Fittings
Crimp Fittings for AQP Racing Hose & StartLite Racing Hose Hose & Fitting Dash Cut-Off Price Size / Notes Adjustable End (in) Wt. Each -08 Yes 0.12
Catalog Part No.
Aeroquip Model
C1ZV76 FBM4263
Red/Silver Anodized Aluminum 37 Flare Swivel, 180 Elbow
Fittings for AQP SOCKETLESS Hose

Features: Lightweight (Aluminum models). Reusable. Tested by major racing teams. Note: AQP SOCKETLESS Hose page 721 Warning: The SOCKETLESS hose fitting is designed for use with Aeroquip hoses. Use of the fitting on another manufacturers hose may result in the fitting coming loose when the connection is pressurized with the possibility of personal injury.
Catalog Part No. Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size Wt. (in) Each -06 -08 -10 -12 0.79 0.05 0.07 0.10
Aeroquip Model
C1CP83 FBM1512
Red/Blue Anodized Aluminum C1CP84 FBM1513 C1CP85 FBM1514 37 Flare Swivel

C1CP86 FBM1515
Fluid Conveying
Catalog Part No.
Aeroquip Model
Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size (in) Wt. Each -06 -08 -10 0.03 0.05 0.07
C1ZW84 FBE1512
Nickel-Plated Aluminum 37 Flare Swivel
Catalog Part No. C1BR42
Aeroquip Model 4797-4B
Hose Dash Size -04 -04 -06 -08 -08 -10
Fittings for AQP SOCKETLESS Hose Cut-Off Price Fitting Dash Size (in) Wt. Each -04 -05 -08 -08 -10 -10 0.71 0.77 0.93 0.93 1.06 1.06 0.04 0.05 0.10 0.11 0.16 0.17
Brass 37 Flare Swivel
C1BR43 4797-5-4B C1BR44 4797-8-6B C1BR45 C1BR40 C1BR41 4797-8B 4797-10-8B 4797-10B
Catalog Part No.
Aeroquip Model
Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size Wt. (in) Each -06 -08 -10 0.04 0.06 0.15
C1CP87 FBM1522 C1CP88 FBM1523 C1CP89 FBM1524
1124
Hose & Fittings

Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size (in) Wt. Each -06 -08 -10 0.04 0.06 0.09
Catalog Part No.
Aeroquip Model
C1ZW79 FBE1524
Catalog Part No.
Aeroquip Model
Fittings for AQP SOCKETLESS Hose Cut-Off Price Fitting Dash Size (in) Wt. Each -04 -06 -08 0.81 0.93 1.28 0.05 0.10 0.15
C1CS76 FC5849-0404S C1CS75 FC5847-0606S
Plated Steel 37 Flare Swivel, 45 Elbow
C1CS77 FC5849-0808S
Catalog Part No.
Aeroquip Model
Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size (in) Wt. Each -06 -08 -10 -12 0.05 0.02 0.09 0.04
C1CP91 FBM1532 C1CP92 FBM1533 C1CP93 FBM1534
Fluid Conveying
Red/Blue Anodized Aluminum C1CP94 FBM1535 37 Flare Swivel, 90 Elbow
Catalog Part No.
Aeroquip Model
Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size Wt. (in) Each -06 -08 -10 0.04 0.07 0.10
C1ZW78 FBE1532 C1ZW77 FBE1533 C1ZW76 FBE1534

Catalog Part No. Aeroquip Model C1AM64 191321-4S C1AM39 190516-6S C1AM65 191321-8S Hose Dash Size -04 -06 -08 Fittings for AQP SOCKETLESS Hose Cut-Off Price (in) Each Fitting Dash Size Wt. -04 -06 -08 0.70 0.83 1.05 0.05 0.09 0.15

Catalog Part No. Aeroquip Model Fittings for AQP SOCKETLESS Hose Cut-Off Price (in) Each Hose & Fitting Dash Size Wt. -06 0.04
C1CP95 FBM1542
1125
Hose & Fittings
Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size (in) Wt. Each -10 -12 0.10 0.16
Catalog Part No.
Aeroquip Model
C1CQ12 FBM1554 C1CQ13 FBM1555
Catalog Part No.
Aeroquip Model
Fittings for AQP SOCKETLESS Hose Cut-Off Price Hose & Fitting Dash Size Wt. (in) Each -06 -08 -10 -12 0.04 0.05 0.08 0.08
C1CQ14 FBM1562 C1CQ15 FBM1563 C1CQ16 FBM1564
C1CQ17 FBM1565
Catalog Part No.
Aeroquip Model
Hose Dash Size 3/8-24 7/16-24 1/2-20 5/8-18 3/4-18 7/8-18
Fittings for AQP SOCKETLESS Hose Fitting Dash Size & Cut-Off Price Thread (in) Wt. Each -04 (3/8-24) -04 (7/16-24) -04 (7/16-24) -06 (5/8-18) -08 (3/4-18) -10 (7/8-18) 0.75 0.75 0.82 0.86 0.94 1.01 0.03 0.03 0.04 0.06 0.10 0.16
C1BQ98 4740-3-4B
Fluid Conveying
Brass Male Inverted Flare
C1BQ99 4740-4B C1BR11 4740-5-4B C1BR12 4740-6B C1BR13 4740-8B C1BQ97 4740-10B
Aeroquip Model 4738-2-4B 4738-4-4B 4738-4-6B 4738-6-6B 4738-8-8B 4738-12-12B
Hose Dash Size -04 -04 -06 -06 -08 -08 -10 -12
Fittings for AQP SOCKETLESS Hose Cut-Off Price Pipe Size (in) Wt. Each 1/8 NPTF 1/4 NPTF 1/4 NPTF 3/8 NPTF 3/8 NPTF 1/2 NPTF 1/2 NPTF 3/4 NPTF 0.65 0.83 0.89 0.89 0.89 1.14 1.14 1.21 0.03 0.06 0.10 0.07 0.10 0.15 0.18 0.24
Brass Male Pipe
C1BQ89 C1BQ90 C1BQ91 C1BQ94 C1BQ87
C1BQ92 4738-6-8B C1BQ93 4738-8-10B
1126
Hose & Fittings
Reusable Fittings for Aeroquip FBF A/C Hose

Features: Reusable. Nickel plated steel. Note: Aeroquip FBF A/C Hose page 1118 Warning: These hose fittings are designed for use with Aeroquip FBF A/C hose. Use of the fitting on another manufacturers hose may result in the fitting coming loose when the connection is pressurized with the possibility of personal injury.
Catalog Part No. Reusable Fittings for Aeroquip FBF A/C Hose Price Hose & Fitting Dash Size Wt. Each -06 -08 -10 0.14 0.22 0.34
Aeroquip Model
Female O-Ring Pilot
C1GB67 FBE1712 C1GB72 FBE1713 C1GC38 FBE1714
Catalog Part No.
Aeroquip Model
Reusable Fittings for Aeroquip FBF A/C Hose Price Hose & Fitting Dash Size Wt. Each -06 0.23
C1GC47 FBE1812
Fluid Conveying
Female O-Ring Pilot with Charge Port

Catalog Part No. Reusable Fittings for Aeroquip FBF A/C Hose Price Hose & Fitting Dash Size Wt. Each -06 0.15
Aeroquip Model
C1GC39 FBE1722
Female O-Ring Pilot 45 Elbow

Catalog Part No. Reusable Fittings for Aeroquip FBF A/C Hose Price Hose & Fitting Dash Size Wt. Each -06 -10 0.15 0.40
Aeroquip Model
C1GC42 FBE1732 C1GC44 FBE1734
Female O-Ring Pilot 90 Elbow

Catalog Part No. Reusable Fittings for Aeroquip FBF A/C Hose Price Each Hose & Fitting Dash Size Wt. -08 -10 0.35 0.48
Aeroquip Model
C1GC51 FBE1833 C1GC52 FBE1834
Female O-Ring Pilot 90 Elbow with Charge Port
1127
Hose & Fittings
Fittings for Teflon Racing Hose

Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size (in) Wt. Each -03 -04 -06 -08 1.04 1.13 1.22 1.35 0.05 0.07 0.10 0.19
Catalog Part No.
Aeroquip Model
Hose Dash Size -03 -04 -06 -08
C1AM41 190600-3S
Plated Steel, Brass Nipple 37 Flare Swivel
C1BW76 63-190600-4 C1KL53 FBM1103 C1BW79 63-190600-8
Catalog Part No.
Aeroquip Model
Hose Dash Size -03 -04 -06 -08
Fittings for Teflon Racing Hose Cut-Off Price (in) Each Fitting Dash Size Wt. -03 -04 -06 -08 1.13 1.22 1.35 0.04 0.09 0.05 0.20
C1ZY27 FBM1130
Stainless Steel 37 Flare Swivel
C1AM42 190600-4C C1AM44 190600-6C C1AM45 190600-8C
Catalog Part No.
Aeroquip Model
Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size (in) Wt. Each -03 -04 -06 1.17 1.05 1.20 0.45 0.09 0.15
Fluid Conveying
C1AM53 190773-3S C1AM54 190773-4S
C1AM55 190773-6S
Note: Fitting Sizes -04 and -08 mate with both JIC 37 and SAE 45 male flares. Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size Wt. (in) Each -03 -04 0.07 0.30
Catalog Part No.
Aeroquip Model
Hose Dash Size -03 -04
Forged Stainless Steel 37 Flare Swivel, 45 Elbow

Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size Wt. (in) Each -04 -06 -08 0.95 1.10 1.41 0.07 0.14 0.25
Catalog Part No. C1AM51 C1AM52
C1AM50 190772-4S
Note: Fitting Sizes -04 and -08 mate with both JIC 37 and SAE 45 male flares.
1128
Hose & Fittings

Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size (in) Wt. Each -03 -04 0.40 0.10
Catalog Part No.
Aeroquip Model
Hose Dash Size -03 -04
Forged Stainless Steel 37 Flare Swivel, 90 Elbow

Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size (in) Wt. Each -06 SAE 1.25 0.11
Catalog Part No.
Aeroquip Model
Hose Dash Size -06
C1BW83 63-190990-6
Plated Steel, Brass Nipple 45 Flare Swivel

Catalog Part No. Aeroquip Model Hose Dash Size -06 Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size Wt. (in) Each -06 SAE 1.20 0.13
C1EQ29 FC9341-0606S

Catalog Part No. Fittings for Teflon Racing Hose Cut-Off Price Fitting Dash Size Wt. (in) Each -06 SAE 1.10 0.14
Fluid Conveying
Aeroquip Model
Hose Dash Size -06
C1EQ28 FC9171-0606S

Catalog Part No. Aeroquip Model Hose Dash Size -04 -04 -06 -08 Fittings for Teflon Racing Hose Cut-Off Price Pipe Size Wt. (in) Each 1/8 NPTF 1/4 NPTF 1/4 NPTF 3/8 NPTF 0.89 1.08 1.13 1.16 0.25 0.25 0.20 0.18
C1BM62 38-190627-2-4
Plated Steel, Brass Nipple Male Pipe
C1BM63 38-190627-4-4 C1BM65 38-190627-4-6 C1HD82 38-190627-6-8
Catalog Part No.
Aeroquip Model
Fittings for Teflon Racing Hose Fitting Dash Size & Cut-Off Price Thread (in) Wt. Each -04 (7/16-24) -06 (5/8-18) -08 (3/4-18) 1.66 1.69 1.84 0.07 0.11 0.20
C1CT47 FC9062-0404S
Plated Steel Male Inverted Flare
C1CT48 FC9062-0606S C1CT49 FC9062-0808S
1129
Hose & Fittings
Fittings for Teflon Racing Hose Fitting Dash Size & Cut-Off Price Thread (in) Wt. Each -06 (5/8-18) 1.60 0.13
Catalog Part No.
Aeroquip Model
Hose Dash Size -06
C1AM57 190950-6S
Plated Steel Male Inverted Flare, 90 Elbow

Catalog Part No. Aeroquip Model Hose Dash Size -03
Fittings for Teflon Racing Hose Cut-Off Price Fitting Size Wt. (in) Each 10 MM 0.05
C1EB89 FBM3091
Plated Steel 10mm Banjo, Straight

Catalog Part No. Fittings for Teflon Racing Hose Cut-Off Price Fitting Size (in) Wt. Each 10 MM 0.05
Aeroquip Model
Hose Dash Size -03
C1EB90 FBM3092
Plated Steel 10mm Banjo, 17 Elbow

Catalog Part No. Fittings for Teflon Racing Hose Price Material Wt. Each Brass Brass Stainless Steel Brass Brass 0.01 0.01 0.01 0.01 0.01
Fluid Conveying
Aeroquip Model
Hose Dash Size -03 -04 -04 -06 -08
C1CA87 900568-3B
900568 Replacement Sleeves for Reusable Teflon Racing Hose Fittings
C1CA88 900568-4B C1EH43 900568-4C C1CA90 900568-6B C1CA91 900568-8B
Note: Us brass for re-assembly with steel fittings, stainless for stainless fittings.
Reusable Fittings for AQP High Pressure Hose

Reusable Fittings for AQP High Pressure Hose Cut-Off Price Hose Dash Size Fitting Dash Size (in) Wt. Each -06 -06 -08 -08 -08 -10 -10 -10 -12 -12 -06 -08 -06 -08 -10 -08 -10 -12 -10 -12 1.43 1.52 1.53 1.62 1.80 1.64 1.81 1.91 1.83 1.92 0.16 0.20 0.22 0.26 0.31 0.34 0.39 0.49 0.45 0.57
Aeroquip Model 4411-6S 4411-8-6S 4411-8S 4411-10-8S 4411-10S
Plated Steel 37 Flare Swivel
C1BQ41 C1BQ42 C1BQ27 C1BQ28
C1BQ38 4411-6-8S
C1BQ40 4411-8-10S C1BQ29 4411-12-10S C1BQ26 4411-10-12S C1BQ30 4411-12S
1130
Hose & Fittings

Reusable Fittings for AQP High Pressure Hose Cut-Off Price Hose Dash Size Fitting Dash Size (in) Wt. Each -06 -08 -10 -12 -06 -08 -10 -12 1.33 1.84 1.95 2.21 0.15 0.29 0.40 0.63
Catalog Part No.
Aeroquip Model
C1AM11 190265-6S C1AM24 190297-8S
C1AM21 190297-10S C1AL97 190265-12S
Catalog Part No. C1AL95 C1AM20
Reusable Fittings for AQP High Pressure Hose Cut-Off Price Hose Dash Size Fitting Dash Size (in) Wt. Each -06 -08 -10 -12 -06 -08 -10 -12 1.23 1.61 1.65 2.17 0.20 0.30 0.41 0.75
C1AM17 190296-10S
C1AL92 190261-12S
Catalog Part No.
Reusable Fittings for AQP High Pressure Hose Fitting Dash Size & Cut-Off Price Hose Dash Size Thread (in) Wt. Each -06 -06 -08 -05 (1/2-20) -06 (5/8-18) -08 (3/4-18) 1.82 1.82 2.05 0.30 0.14 0.25
C1AL81 190111-5-6S
Fluid Conveying
Plated Steel Male Inverted Flare
C1AL83 C1AL84
Catalog Part No.
Aeroquip Model
Reusable Fittings for AQP High Pressure Hose Fitting Dash Size & Cut-Off Price Hose Dash Size Wt. Thread (in) Each -06 -06 -08 -05 (1/2-20) -06 (5/8-18) -08 (3/4-18) 2.10 2.24 0.20 0.15 0.25
C1AM35 190371-5-6S C1AM37 190371-6S C1AM38 190371-8S Plated Steel Male Inverted Flare, 45 Elbow
Catalog Part No. C1AL87
Reusable Fittings for AQP High Pressure Hose Fitting Dash Size & Cut-Off Price Thread (in) Each Hose Dash Size Wt. -06 -06 -06 -08 -05 (1/2-20) -06 (5/8-18) -07 (11/16-18) -08 (3/4-18) 1.73 1.73 1.89 0.14 0.25 0.17 0.25
C1EM24 190235-5-6S C1AL88 190235-7-6S C1AL90 190235-8S Plated Steel Male Inverted Flare, 90 Elbow
1131
Adapters
AN Flare Adapters
AN Flare Adapters Price Wt. Each 0.02 0.05 0.05 0.08 0.12 0.01
Catalog Part No.
Aeroquip Model
"A" Dash Size -04 -06 -08 -10 -12 -16
"B" Dash Size -04 -06 -08 -10 -12 -16
C1CQ43 FBM2051
Male 37 Flare / Male 37 Flare C1CQ45 FBM2053 Blue Anodized Aluminum C1CQ46 FBM2054 (AN 815) C1CQ47 FBM2055
C1EA75 FBM2056
C1CQ44 FBM2052
Note: AN number is for configuration reference only. AN Flare Adapters Price Wt. Each 0.03 0.05 0.07 0.05
Catalog Part No.
Aeroquip Model
"A" Dash Size -04 -06 -08 -10
"B" Dash Size -04 -06 -08 -10
C1CQ67 FBM2914
Female 37 Flare / Female 37 C1CQ69 FBM2916 Flare C1CQ70 FBM2917 Blue Anodized Aluminum
C1CQ68 FBM2915
Fluid Conveying
Catalog Part No.
Aeroquip Model
"A" Dash Size -06 -10 -12
"B" Dash Size -06 -10 -12
AN Flare Adapters Price Wt. Each 0.04 0.11 0.18
C1GF98 FBM2971 C1GG11 FBM2973
Female 37 Flare Swivel 45 Elbow
C1GG12 FBM2974
Catalog Part No.
Aeroquip Model
"A" Dash Size -06 -08 -10 -12
"B" Dash Size -06 -08 -10 -12
AN Flare Adapters Price Wt. Each 0.05 0.08 0.11 0.19
C1GG13 FBM2978 C1GG14 FBM2979 C1GG15 FBM2980 C1GG16 FBM2981
Female 37 Flare Swivel 90 Elbow
1132
Adapters
AN Flare Adapters Price Wt. Each 0.04
Catalog Part No.
Aeroquip Model
"A" and "B" Dash Size -06
Material Red Anodized Aluminum
C1GN42 FBM3148
Female 37 Flare Swivel / Male 37 Flare 45 Elbow

AN Flare Adapters Price Each Wt. 0.04 0.10
Catalog Part No.
Aeroquip Model
"A" and "B" Dash Size -06 -10
Material Red Anodized Aluminum Red Anodized Aluminum
C1GN46 FBM3155 C1GN48 FBM3157
Female 37 Flare Swivel / Male 37 Flare 90 Elbow

AN Flare Adapters Price "C" Dash Size Wt. Each -03 -04 -06 -08 -10 -12 -16 0.02 0.03 0.05 0.09 0.14 0.22 0.33
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -08 -10 -12 -16
"B" Dash Size -03 -04 -06 -08 -10 -12 -16
C1ZY25 FBM2060
Fluid Conveying
C1CQ48 FBM2061 C1CQ49 FBM2062 C1CQ50 FBM2063
Male 37 Flare Tee Blue Anodized Aluminum (AN 824)
C1EA76 FBM2064 C1EA77 FBM2065 C1EA78 FBM2066
Note: AN number is for configuration reference only.
Catalog Part No.
Aeroquip Model
"A" Dash Size -10 -10 -12 -12
"B" Dash Size -10 -12 -12 -16
C1EB84 FBM2953 C1EB85 FBM2954
Male O-Ring Boss / Male 37 C1EB86 FBM2955 Flare C1EB87 FBM2956 Blue Anodized Aluminum
AN Flare Adapters Catalog Part No. Aeroquip Model "A" Dash Size -04 -06 -08 -08 -10 -10 -12 -12 "B" Dash Size -03 -04 -04 -06 -06 -08 -08 -10 Material Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Wt. 0.02 0.03 0.05 0.05 0.07 0.07 0.11 0.11 Price Each
C1EA73 FBM2048 C1EB26 FBM2156
Male 37 Flare / Male 37 Flare C1EB27 FBM2160 (AN 919)

C1EB28 FBM2162 C1EB29 FBM2163 C1EB30 FBM2166 C1EB31 FBM2167
C1EA74 FBM2049
1133
Adapters
Catalog Part No.
Aeroquip Model
"A" Dash Size -04 -06 -08 -12
"B" Dash Size -04 -06 -08 -12
C1EA89 FBM2119 C1EA90 FBM2120 C1EB40 FBM2190 C1EB41 FBM2191
Male 37 Flare / Male 37 Flare 90 Elbow, Blue Anodized Aluminum (AN 821)
Catalog Part No.
Aeroquip Model
"A" Dash Size -08
"B" Dash Size -08
"C" Dash Size -08
AN Flare Adapters Price Material Wt. Each Aluminum 0.13
C1FN41 FBM2175
Female 37 Tee Blue Anodized Aluminum

Catalog Part No. Aeroquip Model Dash Size -04 -06 -08 -10 Material Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum AN Flare Adapters Price Wt. Each 0.04 0.06
C1GB64 FBM2254 C1GB65 FBM2255 C1FV86 FBM2256 C1FV87 FBM2257
Fluid Conveying
0.11 0.16
Female 37 Flare Swivel / Male 37 Flare / Male 37 Flare Tee

Catalog Part No. Aeroquip Model Dash Size -08 -10 Material AN Flare Adapters Price Wt. Each 0.10 0.15
C1GN38 FBM2283 C1GN39 FBM2284
Blue Anodized Aluminum Blue Anodized Aluminum
Male 37 Flare / Female 37 Flare Swivel / Male 37 Flare Tee

AN Flare Adapters Price Wt. Each 0.01 0.01 0.01 0.03 0.08 0.12
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -08 -12 -16
C1EC27 FBM3712
37 Flare Plug Blue Anodized Aluminum Aluminum (AN 806)
C1EC28 FBM3713 C1EC29 FBM3714 C1EC30 FBM3715 C1EC32 FBM3717 C1EC33 FBM3718 Note: AN number is for configuration reference only.
1134
Adapters
AN Flare Adapters Price Wt. Each 0.02 0.03 0.03 0.04 0.06 0.10 0.14
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -08 -10 -12 -16
C1EC47 FBM3751
37 Flare Cap Blue Anodized Aluminum (AN 929)
C1EC48 FBM3752 C1EC40 FBM3740 C1EC41 FBM3741 C1EC42 FBM3742 C1EC43 FBM3743 C1EC44 FBM3744 Note: AN number is for configuration reference only.
O-Ring Boss Adapters

O-Ring Boss Adapters Price Wt. Each 0.03 0.04 0.05
Catalog Part No.
Aeroquip Model
"A" Dash Size -06 -08 -10
C1EC36 FBM3724 C1EC37 FBM3725 C1EC38 FBM3726
Fluid Conveying
SAE O-Ring Boss Plug Blue Anodized Aluminum (AN 814)
AN Tube Fittings
AN Tube Fittings Price Wt. Each 0.05 0.05 0.03 0.05
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -08
C1EB96 FBM3554
37 Flare Nut Blue Anodized Aluminum (AN 818)
C1EB97 FBM3555 C1EC19 FBM3675 C1EC20 FBM3676 Note: AN number is for configuration reference only.
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -08
AN Tube Fittings Price Wt. Each 0.01 0.01 0.01 0.01
37 Flare Sleeve Blue Anodized Aluminum (AN 819)
C1EC13 FBM3669 C1EC14 FBM3670 C1EC15 FBM3671 C1EC16 FBM3672 Note: AN number is for configuration reference only.
1135
Adapters
AN Flare Bulkhead Adapters

AN Flare Bulkhead Adapters Catalog Part No. Aeroquip Model "A" Dash Size -03 -03 -04 -06 -08 -10 -12 -16 "B" Dash Size -03 -03 -04 -06 -08 -10 -12 -16 Material Steel Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Wt. 0.07 0.10 0.03 Price Each
C1EB47 FBM2770
Male 37 Flare / Male 37 Flare C1CQ51 FBM2071 Bulkhead Union C1CQ52 FBM2072 (AN 832)
C1CQ53 FBM2073 C1CQ54 FBM2074 C1CQ55 FBM2075 C1EA79 FBM2076
C1EB46 FBM2769
0.04 0.07 0.11 0.17 0.27
Note: Aluminum part numbers do NOT include a locknut. Steel part numbers include a locknut. Aluminum Locknuts page 1137 Note: AN number is for configuration reference only. AN Flare Bulkhead Adapters Catalog Part No. Aeroquip Model "A" Dash Size -03 -04 -06 -10 "B" Dash Size -03 -04 -06 -10 Material Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Wt. 0.03 0.05 0.05 0.15 Price Each
Fluid Conveying
C1ZY24 FBM2799 C1CQ56 FBM2081 C1CQ57 FBM2082 C1EA80 FBM2084
Male 37 Flare / Male 37 Flare C1FE92 FBM2085 -12 -12 Blue Anodized Aluminum 0.23 90 Bulkhead Union Elbow Note: Aluminum part numbers do NOT include a locknut. Steel part numbers include a locknut. Aluminum Locknuts page 1137 Blue Anodized Alum (AN 833)
Note: AN number is for configuration reference only. AN Flare Bulkhead Adapters Catalog Part No. Aeroquip Model "A" Dash Size -03 -04 -08 "B" Dash Size -03 -04 -08 "C" Dash Size -03 -04 -08 Material Blue Anodized Aluminum Blue Anodized Aluminum Blue Anodized Aluminum Wt. 0.04 0.04 0.13 Price Each
C1ZY22 FBM2815 C1FM63 FBM2117 C1FM65 FBM2180
Male 37 Flare Bulkhead Run Note: Aluminum part numbers do NOT include a locknut. Steel part numbers include a locknut. Aluminum Locknuts page 1137 Tee Note: AN number is for configuration reference only. (AN 804)
AN Flare Bulkhead Adapters Catalog Part No. Aeroquip Model "A" Dash Size -03 -04 -08 "B" Dash Size -03 -04 -08 "C" Dash Size -03 -04 -08 Material Steel Blue Anodized Aluminum Blue Anodized Aluminum Wt. 0.12 0.04 0.13 Price Each
C1EB48 FBM2800 C1FM60 FBM2091 C1FM62 FBM2093
Male 37 Flare Bulkhead Tee (AN 834)
Note: Aluminum part numbers do NOT include a locknut. Steel part numbers include a locknut. Aluminum Locknuts page 1137 Note: AN number is for configuration reference only.
1136
Adapters
AN Flare Bulkhead Adapters Price Wt. Each 0.01 0.02 0.02 0.02 0.05 0.07 0.04
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -08 -10 -12 -16
C1EB98 FBM3556 C1CQ59 FBM2099
Blue Anodized Aluminum Locknut (AN 924)
C1CQ60 FBM2100 C1CQ61 FBM2103 C1CQ62 FBM2104 C1CQ63 FBM2105 C1EA82 FBM2106 Note: AN number is for configuration reference only.
AN Flare To Pipe Adapters

AN Flare To Pipe Adapters Price Finish Wt. Each Blue Anodized Blue Anodized Blue Anodized Nickel Plated Blue Anodized Black Anodized Blue Anodized Nickel Plated Blue Anodized Black Anodized Blue Anodized Nickel Plated Blue Anodized Blue Anodized Nickel Plated Blue Anodized Black Anodized Nickel Plated Blue Anodized Blue Anodized Black Anodized Blue Anodized Black Anodized Nickel Plated Blue Anodized Blue Anodized 0.01 0.01 0.02 0.02 0.04 0.04 0.10 0.02 0.03 0.03 0.03 0.04 0.05 0.04 0.04 0.03 0.03 0.07 0.06 0.03 0.03 0.10 0.01 0.10 0.14 0.16
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -06 -04 -04 -06 -06 -08 -06 -06 -06 -06 -08 -08 -08 -08 -08 -10 -12 -10 -12 -12 -12 -16 -16
"B" Pipe Size 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/8 3/8 3/8 1/2 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 1.0
C1EA67 FBM2000
Male 37 Flare / Male Pipe Aluminum (AN 816)
C1CQ18 FBM2001 C1CQ20 FBM2003 C1ZW75 FBE2003 C1CQ19 FBM2002 C1KL65 FBM5002 C1CQ21 FBM2004 C1ZW74 FBE2004 C1EA68 FBM2006 C1KL66 FBM5003 C1CQ22 FBM2005 C1ZW73 FBE2005
Fluid Conveying
C1ZW46 FBM2013 C1CQ23 FBM2007 C1ZW72 FBE2007 C1CQ24 FBM2008 C1KL69 FBM5008 C1ZW71 FBE2008 C1CQ25 FBM2009 C1CQ26 FBM2010 C1KL70 FBM5009 C1CQ27 FBM2011 C1KL71 FBM5011 C1JA50 FBE2011 C1ZW44 FBM2015 C1CQ28 FBM2012
Note: Nickel-Plated models have a "stainless steel" appearance. Note: AN number is for configuration reference only.
1137
Adapters
AN Flare To Pipe Adapters Price Pipe Tap C Wt. Each 1/8 NPT 0.05
Catalog Part No.
Aeroquip Model
"A" Dash Size -06
Pipe Thread B 3/8 NPT
C1GN33 FBM2277
Male 37 Flare / Male Pipe / Female Pipe Tap, Blue Anodized Aluminum
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -08 -10 -10 -16
"B" Pipe Size 1/8 1/8 1/4 3/8 1/2 1/2 1.0
AN Flare To Pipe Adapters Price Each Finish Wt. Blue Anodized Blue Anodized Blue Anodized Blue Anodized Blue Anodized Nickel Plated Blue Anodized 0.02 0.01 0.03 0.05 0.08 0.08 0.75
C1ZY26 FBM2020 C1CQ29 FBM2021 C1CQ30 FBM2022 C1CQ31 FBM2023 C1CQ32 FBM2024 C1ZW67 FBE2024 C1EA69 FBM2026
Male 37 Flare / Male Pipe 45 Elbow Aluminum (AN 823)
Note: Nickel-Plated models have a "stainless steel" appearance. Note: AN number is for configuration reference only. AN Flare To Pipe Adapters Price Finish Wt. Each Blue Anodized Blue Anodized Blue Anodized Black Anodized Blue Anodized Black Anodized Blue Anodized Black Anodized Blue Anodized Nickel Plated Blue Anodized Black Anodized Blue Anodized Black Anodized Blue Anodized Blue Anodized Blue Anodized Black Anodized Blue Anodized 0.02 0.03 0.03 0.03 0.02
Fluid Conveying
Catalog Part No.
Aeroquip Model
"A" Dash Size -03 -04 -06 -06 -04 -04 -06 -06 -06 -06 -08 -08 -08 -08 -10 -12 -12 -12 -16
"B" Pipe Size 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 3/4 3/4 1.0
C1EA70 FBM2030 C1EA71 FBM2031 C1CQ35 FBM2033 C1KL73 FBM5033 C1CQ34 FBM2032 C1KL72 FBM5032 C1CQ36 FBM2034 C1KL74 FBM5034 C1CQ37 FBM2035 C1ZW64 FBE2035 C1CQ38 FBM2037 C1KL76 FBM5037 C1CQ39 FBM2038 C1KL77 FBM5038 C1CQ40 FBM2039 C1ZW42 FBM2017 C1CQ41 FBM2040 C1KL78 FBM5040 C1CQ42 FBM2041
Male 37 Flare / Male Pipe 90 Elbow Aluminum (AN 822)
0.02 0.04 0.04 0.10 0.06 0.07 0.07 0.05 0.05 0.10 0.16 0.16 0.16 0.25
Note: Nickel-Plated models have a "stainless steel" appearance. Note: AN number is for configuration reference only.
1138
Adapters
AN Flare To Pipe Adapters Price "C" Pipe Size Wt. Each 1/8 1/8 1/4 0.03 0.02 0.05
Catalog Part No.
Aeroquip Model
"A" Dash Size -04 -03 -06
"B" Dash Size -04 -03 -06
C1ZT34 FBM2121 C1FQ24 FBM2187 C1EP70 FBM2122
Male 37 Flare / Male 37 Flare / Male Pipe Tee Blue Anodized Aluminum (AN 825)
Catalog Part No. Aeroquip Model "A" Dash Size -04 -08 "B" Pipe Size 1/8 3/8 C1EA91 FBM2124 C1EA93 FBM2126
AN Flare To Pipe Adapters Price "C" Dash Size Wt. Each -04 -08 0.03 0.09
Male 37 Flare / Male 37 Flare / Male Pipe Tee Blue Anodized Aluminum (AN 826)
High Pressure Adapters

High Pressure Adapters Price Thread "B" Wt. Each 1/2-20 11/16-18 5/8-18 0.05 0.07 0.06
Fluid Conveying
Catalog Part No.
Aeroquip Model
"A" Dash Size -06 -06 -06
C1ZY21 FBM2963 C1ZY19 FBM2965
Male 37 Flare / 42 Inverted C1ZY20 FBM2964 Male Flare
Metric Adapters
Metric Adapters Price Wt. Each 0.50 0.16
Catalog Part No.
Aeroquip Model
"A" Dash Size -06 -06
Thread "B" M16 x 1.5 M18 x 1.5
C1CQ66 FBM2608
C1EB44 FBM2609
Male 37 Flare / Metric Male Steel
Note: Used for Saginaw power steering adapter (metric). Also G.M. fuel injection conversion adapter for metric o-ring style porting.
1139
Adapters
Metric Adapters Price Wt. Each 0.01 0.02 0.02 0.03 0.05
Catalog Part No.
Aeroquip Model
"A" Dash Size -04 -06 -06 -08 -10
Thread "B" 10MM x 1.0 12MM x 1.5 14MM x 1.5 18MM x 1.5 18MM x 1.5
Male 37 Flare / Metric Male Blue Anodized Aluminum
C1ZW38 FBM2240 C1ZW34 FBM2244 C1ZW33 FBM2245
Pipe Adapters
Pipe Adapters Price Wt. Each 0.20 0.20
Catalog Part No.
Aeroquip Model
Pipe Size 1/8 3/8
Female Pipe Coupling Blue Anodized Aluminum (AN 910)
Fluid Conveying
Catalog Part No.
Aeroquip Model
Pipe Size 1/8 1/4 1/2
Pipe Adapters Price Wt. Each 0.20 0.25
Male Pipe Hex Nipple Blue Anodized Aluminum (AN 911)
C1EB11 FBM2135 Note: AN number is for configuration reference only.
0.06
Catalog Part No.
Aeroquip Model
"A" Pipe Size 1/8
"B" Pipe Size 1/8
Pipe Adapters Price Wt. Each 0.02
C1ZT33 FBM2147
Male Pipe / Female Pipe Blue Anodized Aluminum 90 Elbow (AN914)
1140
Adapters
Pipe Adapters Price Wt. Each 0.03 0.08 0.10
Catalog Part No.
Aeroquip Model
Pipe Size 1/8 1/4 3/8
C1EB23 FBM2150 C1EB24 FBM2151 C1EB25 FBM2152 Note: AN number is for configuration reference only.
Female Pipe Tee Blue Anodized Aluminum (AN 917)
Catalog Part No.
Aeroquip Model
"A" Pipe Size 1/4 3/8 3/8 1/2 1/2 3/4 3/4 3/4 1.0
"B" Pipe Size 1/8 1/8 1/4 1/4 3/8 1/4 3/8 1/2 3/4
Pipe Adapters Price Wt. Each 0.01 0.02 0.02 0.40 0.03 0.08 0.07 0.05 0.09
Male Pipe / Female Pipe Bushing Blue Anodized Aluminum (AN 912)
C1EB13 FBM2137 C1EB16 FBM2140 C1EB15 FBM2139 C1EB20 FBM2144 C1EB19 FBM2143 C1EB18 FBM2142 C1EB21 FBM2145
Fluid Conveying
Note: AN number is for configuration reference only. Pipe Adapters Price Wt. Each 0.01 0.01 0.01 0.02 0.02
Catalog Part No.
Aeroquip Model
Pipe Size 1/16 1/8 1/4 3/8 1/2
C1EC23 FBM3684
Allen Head Pipe Plug Blue Anodized Aluminum (AN 932)
C1EC24 FBM3685 C1EC25 FBM3686 C1EC26 FBM3687 C1EC45 FBM3749 Note: AN number is for configuration reference only.
1141
Adapters
Aluminum Tank Welding Bungs

Threaded connection is female SAE O-Ring Boss. Note: AN flare adapters have the same threads as SAE O-Ring Boss adapters. If a properly sized O-Ring is positioned on the adapter, and the hex on the AN flare adapter is large enough to completely cover the O-Ring as it is compressed into the welding bung port, that combination may be used. Buna-N O-Rings (For use with gasoline fuels): SAE O-Ring Boss O-Rings page 1099
Catalog Part No. Aeroquip Model Aluminum Tank Welding Bungs B C Price "A" Thread Size (in) (in) Wt. Each 9/16-18 3/4-16 7/8-14 1-1/16-12 -----1.56 0.59 1.75 0.68 1.87 0.75 2.00 0.90 ----------0.06 0.08 0.09 0.12 0.01 0.15 0.15 0.02 0.01
"A" Dash Size -06 -08 -10 -12 -06 Buna-N O-Ring -08 Buna-N O-Ring -10 Buna-N O-Ring -12 Buna-N O-Ring -16 Buna-N O-Ring
C1ZU86 FBM2403 C1ZU85 FBM2404 C1ZU84 FBM2405 C1ZU83 FBM2406 C1BD79 22617-6
Tank Welding Bungs (AN 871) C1BD80 22617-8

C1BD73 C1BD74 C1BD75 22617-10 22617-12 22617-16
Note: AN number is for configuration reference only. Note: Buna-N O-Rings are for use with gasoline fuels.
Fluid Conveying
Special Flare Adapters

Special Flare Adapters Counterbore Price Depth "C" (in) Wt. Each 0.16 0.16 0.16 0.16 0.25 0.25 0.25 0.25 0.25 0.25 0.02 0.03 0.03 0.07 0.10 0.15 0.23 0.39 0.58 1.16
Catalog Part No. C1BZ32 C1BZ33 C1BZ34
Aeroquip Model 73014-4S 73014-5S 73014-6S 73014-8S 73014-10S 73014-12S
Fitting Dash Size "A" -04 -05 -06 -08 -10 -12 -16 -20 -24 -32
Tube O.D. "B" (in) 0.25 0.31 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00
73014 Flare To Braze (Unplated)
C1BZ35 C1BZ27 C1BZ28
C1BZ29 73014-16S C1BZ30 73014-20S C1HJ75 73014-24S C1BZ31 73014-32S
1142
Brake System Adapters
Inverted Flare Brake Adapters

Inverted Flare Brake Adapters Brake Thread Size Price "B" Length Wt. Each 3/8-24 7/16-24 3/8-24 7/16-24 1/2-20 1.07 1.14 1.14 1.14 1.16 0.07 0.07 0.08 0.08 0.06
Catalog Part No.
Aeroquip Model
Fitting Dash Size -03 -03 -04 -04 -04
C1EB59 FBM2926 larger hex
Male 37 Flare / 42 Inverted C1EB62 FBM2929 C1EB60 FBM2927 Male Flare

Catalog Part No.
Aeroquip Model
Fitting Dash Size -03
Inverted Flare Brake Adapters Price Brake Thread Size "B" Wt. Each 3/8-24 0.08
C1EB52 FBM2909
Male 37 Flare / Female Inverted Flare Tee

Catalog Part No. Inverted Flare Brake Adapters Wt.per Price Per Brake Thread Size "B" pkg Pkg 3/8-24 0.22
Fluid Conveying
Aeroquip Model
C1EB66 FBM2933
Male 37 Flare / 42 Male Inverted Flare
Note: These model numbers are for a package of 2. Inverted Flare Brake Adapters Brake Thread Size Price Length Wt. "B" Each 7/16-20 1.33 0.10
Catalog Part No.
Aeroquip Model
C1EB58 FBM2925
Male 37 Flare / 30 Male Inverted Flare

Inverted Flare Brake Adapters Price Brake Thread Size "B" Wt. Each 3/8-24 3/8-24 0.01 0.04
Catalog Part No.
Aeroquip Model
Fitting Dash Size -03 -04
Male 37 Flare / Female Inverted Flare
SAE Banjo Brake Adapters
1143
SAE Banjo Brake Adapters Price Brake Thread Size "B" Wt. Each 3/8 7/16 7/16 0.06 0.05 0.12
Catalog Part No.
Aeroquip Model
Fitting Dash Size -03 -03 -04
C1EB82 FBM2949 C1EB72 FBM2939 C1EB73 FBM2940
Male 37 Flare / Banjo
Catalog Part No.
Aeroquip Model
Thread A 3/8-24 7/16-20
SAE Banjo Brake Adapters Price Crushwasher Model Wt. Each FBM3642 FBM3513 0.02 0.06
C1EB55 FBM2921
SAE Banjo Bolt
C1EB56 FBM2922
Note: 2 crushwashers are included. Crushwashers page 1155
Metric Brake Adapters

Metric Brake Adapters Price Brake Thread Size "B" Wt. Each 10mm x 1 10mm x 1.5 10mm x 1 0.09 0.04 0.10
Fluid Conveying
Catalog Part No.
Aeroquip Model
Fitting Dash Size -03 -03 -04
C1EB74 FBM2941
Male 37 Flare / Metric Male Flare
C1GM83 FBM2966 C1EB76 FBM2943
Catalog Part No.
Aeroquip Model
Metric Brake Adapters Price Brake Thread Size "B" Wt. Each 10mm x 1 0.15
C1EB78 FBM2945
Male 37 Flare / Metric Female Flare
Metric Banjo Brake Adapters

Metric Banjo Brake Adapters Price Each Brake Thread Size "B" Wt. 10mm 10mm 0.08 0.05
Male 37 Flare / Metric Banjo
Catalog Part No.
Aeroquip Model
Fitting Dash Size -03 -04
1144

Metric Banjo Brake Adapters Price Crushwasher Model Wt. Each FBM3642 0.05
Catalog Part No.
Aeroquip Model
Thread A 10mm x 1.25
C1EB57 FBM2923
Metric Banjo Bolt
Note: 2 crushwashers are included. Crushwashers page 1155
Fluid Conveying
1145
Fuel System Components
Aluminum Carburetor Adapters

Aluminum Carburetor Adapters Catalog Part No. Aeroquip Model Fitting Dash Size -06 Application Holley Single Feed 600-660 Series, 4010/4011 Series and all two barrel series with 9/16-24 thread. Includes crushwasher FBM3514. Wt. 0.02 Price Each
C1EA87 FBM2113
FBM2113 Blue Anodized

Aluminum Carburetor Adapters Catalog Part No. Aeroquip Model Application Holley Dual Feed 750 through Dominator 1350 Series and Quadrajet up to 1974 with 7/8-20 thread. Includes crushwasher FBM3516. Wt. 0.03 Price Each
C1CQ65 FBM2114

Fluid Conveying
C1EA84 FBM2110

C1EB42 FBM2192

Aluminum Carburetor Adapters Catalog Part No. Aeroquip Model Application Carter AFB two and four barrel with 5/8-20 thread. Includes FBM3489 o-ring. Wt. 0.03 Price Each
C1EA86 FBM2112

Aluminum Carburetor Adapters Catalog Part No. Aeroquip Model Fitting Dash Size -06 Application Weber bowl fitting. 12mm x 1.5 thread. Does not include seal. Wt. 0.01 Price Each
C1EA88 FBM2116
Aluminum Fuel Pump Adapters
1146

Aluminum Fuel Pump Adapters Catalog Part No. Aeroquip Model Fitting Dash Size -06 Application Inverted flare 5/8-18 thread. Wt. 0.02 Price Each
C1CQ64 FBM2108

Aluminum Fuel Pump Adapters Catalog Part No. Aeroquip Model Fitting Dash Size -10 Application 3/8 Male Pipe to Flare for Holley Electric Fuel Pumps. Blue Anodized. Wt. 0.05 Price Each
C1EB39 FBM2185
Blue Anodized JIC 37 Male Flare to Male Pipe
JIC 37 Male Flare To 42 Inverted Flare

JIC 37 Male Flare To 42 Inverted Flare Price Brake Thread Size "B" Length Wt. Each 1/2-20 1.07 0.02
Catalog Part No.
Aeroquip Model
C1EB35 FBM2181
Fluid Conveying
Blue Anodized JIC 37 Male Flare to 42 Inverted Flare
Aluminum Fuel Blocks

Aluminum Fuel Blocks Pipe Size Price "D" Wt. Each 3/8 1/2 0.15 0.01
Catalog Part No.
Aeroquip Model
Pipe Size "A" 1/4 3/8
Pipe Size "B" 1/4 3/8
Pipe Size "C" 1/8 1/8
Blue Anodized Aluminum Fuel Block
Aluminum In-Line Fuel Pressure Adapters

Aluminum In-Line Fuel Pressure Adapters "B" Dash "C" Pipe Wt. Price Each Size Size -06 -08 1/8 1/8 0.05 0.07
Catalog Part No.
Aeroquip Model FBM2183 FBM2184
"A" Dash Size -06 -08
Blue Anodized Aluminum C1EB38 In-Line Fuel Pressure Adaptor
C1EB37
1147
Metric Banjo Hose Barbs

Metric Banjo Hose Barbs Price Barb Fits Wt. Each Rubber Hose Rubber Hose Rubber Hose ------0.15 0.14 0.12 0.01 0.01 0.01 0.01 0.01 0.02
Catalog Part No.
Voss Model
Hose I.D. 5/16 1/4 3/8 -------
Bolt Size M 12 x 1.5 M 14x1.5 M 18x1.5 M10 Bonded Seal M12 Bonded Seal M14 Bonded Seal M16 Bonded Seal M18 Bonded Seal M22 Bonded Seal
C1BZ75 7612-05R-2 C1BZ76 7614-04R-2 C1BZ82 7618-06R-2
Metric Banjo Hose Barb
C1DW95 400-617-4490-A C1DW96 400-622-4490-A C1DW97 400-627-4490-A C1DW98 400-629-4490-A C1DW99 400-632-4490-A C1DX12 400-636-4490-A
Note: 2 bonded seals are required to seal a banjo fitting. 3 are required when they are stacked. Metric Bonded Seals page 1094
Fluid Conveying
Metric Banjo Bolts

Metric Banjo Bolts Price Hex (mm) Wt. Each 14 17 14 22 24 27 0.03 0.05 0.06 0.11 0.10 0.21
Catalog Part No.
Adaptall Model
Thread (mm) M 10 x 1.0 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 22 x 1.5
L (mm) 25 28 32 38 44 46
C1FM52 F15M10X1.0 C1FM53 F15M12X1.5 C1FM54 F15M14X1.5
F15M Single
C1FM55 F15M16X1.5 C1FM56 F15M18X1.5 C1FM57 F15M22X1.5
Catalog Part No.
Adaptall Model
Thread (mm) M 12 x 1.5 M 14 x 1.5
L (mm) 46 49
Metric Banjo Bolts Price Hex (mm) Wt. Each 17 14 0.06 0.08
C1FM48 DBF12X1.5 C1FM49 DBF14X1.5
DBF Double
1148
BSP Banjo Bolts

BSP Banjo Bolts Price A (in) Wt. Each 1.38 0.08
Catalog Part No.
Voss Model
BSP Thread 1/4-19
Hex (in) 0.69
C1DK33 RX04BMG
RX-BMG
Fluid Conveying
1149
Couplings
QUICK-DRAIN Oil Pan Couplings

The easy, quick and high-tech way to change your oil. Great for streetcars, hot rods, race cars, anything that you need to drain fluid from in a clean and efficient way. Eliminates the potential for spillage - drains directly into a waste container.
QUICK-DRAIN Oil Pan Couplings Minimum Assembly Flow Rate (175F Price Torque Each (ft. lbs) 10W30 Oil) Wt. 20-24 20-40 20-24 30-60 30-60 30-60 30-60 20-24 0.24 GPM 0.24 GPM 0.24 GPM 0.68 GPM 0.68 GPM 0.68 GPM 0.68 GPM 0.24 GPM 0.68 GPM 0.23 0.28 0.24 0.37 0.27 0.31 0.29 0.23 0.34 0.21 0.26
Catalog Part No.
Aeroquip Model
Description Male Half 1/2-20 UNF-2A Male Half M18 x 1.5 6g Male Half M14 x 1.25 6g Male Half M20 x 1.5 6g Male Half M25 x 1.5 6g Male Half M22 x 1.5 6g Male Half M12 x 1.75 6g Male Half 3/4-14 NPT Male Half 1/2-14 NPT Female Half 5/8 Hose Barb
C1FK49 FD14-4002-01-06 C1EK53 FD14-4002-02-06 C1EK54 FD14-4002-03-06 C1EK92 FD14-4002-16-06 C1EK98 FD14-4002-17-06 C1FV92 FD14-4002-18-06 C1FK51 FD14-4002-25-06 C1EL26 FD14-4002-26-06 C1JF24 FD14-4002-27-06 C1EL27 FD14-4003-10-06
C1EK87 FD14-4002-14-06 Male Half 1-1/8-12 UNF-2A
Note: Male half comes complete with cap and gasket. Note: Failure to meet minimum assembly torque could result in fluid leakage. CAUTION: Do not over torque.
Fluid Conveying
Quick-Disconnect Radiator/Cooling Refill Coupling

Female Half: Aluminum female quick-disconnect coupling is 50% lighter than steel version. Viton seals allow higher temperatures. Stainless steel internal components significantly increase corrosion resistance. Blue anodized 6061 aluminum body. Easy connect/disconnect with positive locking. For use with aluminum male coupling half (FBM1153). Male Half: 54% lighter than steel version. Viton seals allow higher temperatures. Stainless steel internal components significantly increase corrosion resistance. Red anodized 6061 aluminum body. Maximum Operating Pressure: 250 PSI. Operating Temperature Range: -15F to 300F. Seal Material: Viton.
Catalog Part No. Quick-Disconnect Radiator/Cooling Refill Coupling Thread Length Price Description Wt. Size (in) (in) Each Male Half - Aluminum 1/2-14 NPTF 0.11
Aeroquip Model
C1FU29 FBM1153
1150
Couplings
Pressure Sensing Couplings

The primary feature of FD90 Series Quick-Disconnect couplings is self-sealing valves in both halves, allowing connection and disconnection with minimal fluid loss and virtually no air inclusion. The FD90 Series coupling is ideal for gauge, diagnostic, wing and chassis adjustment applications. Coupling Body Size: 1/4 Inch. Maximum Operating Pressure: 7000 PSI. Air Inclusion: 0.02 CC maximum. Fluid Loss: 0.1 CC maximum.
Catalog Part No. Pressure Sensing Couplings Thread Length Price Wt. Size (in) (in) Each 1/8-27 NPTF 1/4-18 NPTF 1/8-27 NPTF 1/4-18 NPTF 1/4-18 NPTF 9/16-18 1.95 2.25 1.60 1.49 1.90 1.32 0.25 0.26 0.08 0.07 0.12 0.07 0.01
Aeroquip Model
Description Female Half - Female Pipe Female Half - Female Pipe Male Half - Male Pipe Male Half - Male Pipe Male Half - Female Pipe Male Half - Male SAE O-Ring Dust Cap for Male Half
C1CU37 FD90-1021-02-04 C1CU38 FD90-1021-04-04
C1FK54 FD90-1012-02-04 C1CU36 FD90-1012-04-04
C1CU39 FD90-1034-04-04 C1CU41 FD90-1044-06-04
Fluid Conveying
C1CU40 FD90-1040-04 Note: Not for use with brake fluid.
1151
Couplings
Hydraulic Couplings
PUSH-PULL Self-Sealing Couplings are ideal for most hydraulic and fluid applications requiring a quick connect/disconnect coupling. The coupling bodies are constructed of high quality plated steel, and have Buna-N seals. Maximum Operating Pressure: 5000 PSI (1/4 Inch Size), 4000 PSI (3/8 through 1 Inch Sizes). Air Inclusion: 0.5 CC Max (1/4 Inch Size), 1.5 CC Max (3/8 Inch Size), 2.8 CC Max (1/2 Inch Size), 10.0 CC Max (3/4 Inch Size), 14.2 CC Max (1 Inch Size). Fluid Loss: 0.5 CC Max (1/4 Inch Size), 1.3 CC Max (3/8 Inch Size), 2.8 CC Max (1/2 Inch Size), 8.2 CC Max (3/4 Inch Size), 14.2 CC Max (1 Inch Size). Vacuum Service Rating: 28 Inches HG.
Hydraulic Couplings Rated Price Flow Length (in) Each Wt. (GPM) 1.0 1.0 6.0 12.0 12.0 28.0 50.0 1.0 1.0 6.0 12.0 12.0 28.0 50.0 12.0 12.0 1.81 1.81 2.09 2.76 2.91 3.25 4.09 1.17 1.24 1.40 1.89 2.03 2.28 2.77 2.81 2.08 0.24 0.60 0.36 0.57 0.62 1.02 1.47
Catalog Part No. C1BS97 C1BS98 C1BS99 C1BS94
Aeroquip Model 5601-4-4S 5601-6-6S 5601-8-10S 5601-12-12S
Description Female Half - 1/8-27 Female Pipe Female Half - 1/4-18 Female Pipe Female Half - 3/8-18 Female Pipe Female Half - 1/2-14 Female Pipe Female Half - 3/4-14 Female Pipe Female Half - 3/4 Female Pipe Female Half - 1-11-1/2 Female Pipe Male Half - 1/8-27 Female Pipe Male Half - 1/4-18 Female Pipe Male Half - 3/8-18 Female Pipe Male Half - 1/2-14 Female Pipe Male Half - 3/4 Female Pipe Male Half - 3/4 Female Pipe Male Half - 1-11-1/2 Female Pipe Female Half - 7/8-14 Female SAE Male Half - 7/8-14 Female SAE Dust Cap for -04 Male Half Dust Cap for -06 Male Half Dust Cap for -10 Male Half Dust Cap for -12 Male Half Dust Cap for -16 Male Half Dust Plug for -06 Female Half Dust Plug for -10 Female Half Dust Plug for -12 Female Half
C1BS96 5601-2-4S
C1BS93 5601-12-10S C1BS95 5601-16-16S C1BT14 5602-2-4S C1BT15 5602-4-4S C1BT16 C1BT17 C1BT12 5602-6-6S 5602-8-10S 5602-12-12S
Fluid Conveying
0.05 0.08 0.12 0.23 0.38 0.50 0.76 0.57 0.22 0.03 0.04 0.04 0.11 0.19 0.02 0.04 0.07
C1BT11 5602-12-10S C1BT13 5602-16-16S C1EN49 5608-10-10S C1EN50 5610-10-10S C1BT40 5657-4 C1BT41 5657-6 C1BT37 5657-10 C1BT38 5657-12 C1BT39 5657-16 C1BT48 5659-6 C1BT46 5659-10 C1BT47 5659-12
Note: Not recommended for brake system applications.
1152
Couplings
Fuel Check Couplings

Ideal for use to meet NHRA fuel check requirements. Male half mounts in the fuel line. Self-sealing valves in both halves, allowing connection and disconnection with minimal fluid loss and virtually no air inclusion. Coupling Body Size: 1/4 Inch. Maximum Operating Pressure: 7000 PSI. Air Inclusion: 0.02 CC maximum. Fluid Loss: 0.1 CC maximum.
Catalog Part No. Fuel Check Couplings Thread Length Price Wt. Size (in) (in) Each 1/8-27 NPTF 1.95 0.25
Aeroquip Model
Description Female Half - Female Pipe
C1CU37 FD90-1021-02-04
Fluid Conveying
1153
PRO CLAMP and Overbraid
PRO CLAMP Aluminum Hose Connectors

PRO CLAMP connectors are made of red anodized aluminum to give your band clamp connections a professional look. The PRO CLAMP connector can be used on any rubber or stainless steel braid hose. PRO CLAMP connectors should not be used on brake lines, air conditioning, power steering or other high pressure lines. PRO CLAMP connectors come complete with a quality band clamp.
Catalog Part No. PRO CLAMP Aluminum Hose Connectors Price Hose I.D. (in) Hose O.D. (in) Wt. Each 0.22 0.34 0.44 0.56 0.69 0.44 0.55 0.65 0.80 0.94 0.02 0.03 0.03 0.05 0.07
Aeroquip Model Hose Dash Size -04 -06 -08 -10 -12
C1CP66 FBM1001 C1CP67 FBM1002 C1CP68 FBM1003 C1CP69 FBM1004 C1CP70 FBM1005
Stainless Steel Overbraid

Stainless Steel Overbraid is used to dress up existing rubber hoses. Stainless Overbraid simply slips over current radiator hoses and can be clamped with the Aeroquip PRO CLAMP connectors for a finished hose assembly look. Stainless Overbraid provides no additional performance for the hose, but does provide added abrasion resistance and good looks.
Catalog Part No. Aeroquip Model C1CQ80 FBR2400 Stainless Steel Overbraid Wt. Price Hose O.D. Range (in) (per ft) (per ft) 1-1/8 to 2-1/4 0.31
Fluid Conveying
Nominal I.D. (in) 1-1/2
1154
Accessories
Support Clamps
Vinyl-coated steel support clamps provide security for supporting hose in long runs and critical bends. Match the clamp I.D. and hose O.D. as close as possible.
Catalog Part No. Support Clamps Price Wt. Each 0.18 0.05 0.04 0.04 0.04 0.33 0.04 0.05 0.06 0.05 0.09 0.09 0.01 0.10 0.11 1.30 0.14 0.16 0.16 0.19 0.19 0.24
Aeroquip Model
Clamp I.D. (Closed) (in) 0.25 0.44 0.50 0.56 0.63 0.69 0.75 0.81 0.94 1.00 1.06 1.13 1.19 1.25 1.50 1.75 2.00 2.25 2.50 2.75 2.88 3.56
Bolt Hole Dia. (in) 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.406 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531
C1CB45 900729-18 C1CB36 900729-01 C1CB37 900729-1
C1CB47 900729-2 C1CB48 900729-21 C1CB55 900729-3 C1CB59 900729-4 C1CB60 C1CB61 C1CB62 900729-5 900729-6 900729-8
900729
C1CB49 900729-23 C1CB63 900729-9 C1CB52 900729-27 C1CB50 900729-24 C1CB38 C1CB40 900729-10 900729-12
Fluid Conveying
C1CB41 900729-13 C1CB42 900729-14 C1CB56 900729-30 C1CB43 900729-15 C1EK29 900729-16 C1CB44 900729-17
Replacement Aluminum Crush Washers

Replacement Aluminum Crush Washers Price "A" Dash Size Wt. Each -03 -04 -06 -08 -09 -10 0.65 0.01 0.01 0.01 0.01 0.01
Catalog Part No.
Aeroquip Model
C1EC11 FBM3642 C1EB91 FBM3513 C1EB92 FBM3514
For use with Banjo Fittings and C1EB99 FBM3627 Carburetor Adapters
C1EB94 FBM3516
C1EB93 FBM3515
1155
Accessories
Fire Sleeve
Firesleeve hose flame shield can prevent or delay hose lines from burning. Select firesleeve with an I.D. slightly larger than the hose O.D.
Catalog Part No. Fire Sleeve Wt. Price (per ft) (per ft) 0.50 0.17 0.18 0.23 8.00 20.00 4.50 20.00 0.46 0.48
Aeroquip Model
Sleeve I.D. (in) 0.62 0.75 0.81 0.88 1.00 1.25 1.62 1.75 2.00 2.38
C1BW66 624-10
624
C1BW67 624-12 C1BW68 624-13 C1EN61 624-14 C1BW69 624-16 C1BW70 624-20 C1EN62 624-26 C1EN63 624-28 C1FD39 624-32 C1HJ66 624-38
Silicone Reducers
Fluid Conveying
Silicone Reducers Price Wt. Each 0.17 0.20 0.25 0.24
Catalog Part No. C1JJ62
Thermal Flex Model TFCS40-200/300
Size 2 x 2-1/2 2x3 2-1/2 x 3 2-3/4 x 3 2-3/4 x 3-1/2 3 x 3-1/2 3x4 3-1/2 x 3-3/4 3-1/2 x 4
Length (in) 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
Color Blue Blue Blue Blue Blue Blue Blue Blue Blue
C1HG97 TFCS40-200/250 C1HG98 TFCS40-250/300 C1HG99 TFCS40-275/300 C1HH11 TFCS40-275/350 C1HH12 TFCS40-300/350
0.27 0.25 0.29 0.27 0.30
TFCS40
C1HH13 TFCS40-300/400 C1HH14 TFCS40-350/375 C1HH15 TFCS40-350/400
1156
Assembly Equipment
Vise Jaw Inserts For Anodized Fitting Protection

FCM3661 vise-jaw inserts are a must for race teams, engine builders and street rodders. Keep your good-looking fittings from Aeroquip looking good even after assembly. FCM3661 vise-jaw inserts firmly hold the hex of the fitting during assembly, without marring the anodized finish. Made of aluminum with angled pockets, FCM3661 vise-jaw inserts can be used with any size fitting from -03 to -32. A horizontal pocket the length of the FCM3661 vise-jaws is ideal for securely holding steel braided hose in place, making straight cuts fast and simple. FCM3661 vise-jaw inserts also feature magnetic backs, allowing quick set-ups and easy transfer between vises.
Catalog Part No. Vise Jaw Inserts For Anodized Fitting Protection Price Description Wt. Each Vise Jaw Inserts (pair) 0.96
Aeroquip Model
C1EF79 FCM3661
Fluid Conveying
Hose Assembly Lube

Hose Assembly Lube is a specially compounded lubricant superior to any other lubricant used in hose assembly work. Use for either hand or machine assembly.
Catalog Part No. Hose Assembly Lube Price Wt. Each 0.97
Aeroquip Model
Container Size 1 Pint
C1BC87 222070
222070
1157
Assembly Equipment
Hand-Held Hose Cutter

The FT1356 hand-held hose cutter has been specially designed for cutting all non-wire reinforced hose, such as StartLite and SOCKETLESS hose styles. The cutter's compact size makes it ideal for working in confined areas. It provides fast, accurate easy cuts - every time. Features: Replaceable stainless steel blade that closes into its own handle for safe carrying and handling Tough, durable nylon handles Optional tool pouch.
Catalog Part No. Hand-Held Hose Cutter Price Wt. Each 0.28 0.06
Model Number
Description Hand-Held Hose Cutter Replacement Blade for Hose Cutter
C1EZ22 FT1356 C1EZ23 FT1356-2-1
FT1356
SOCKETLESS Fitting Assembly Tool

The FT1268 hand-held assembly tool is especially designed for quick and easy assembly of SOCKETLESS hose in sizes -04, -06 and -08. The hose is held in position by a manually operated clamp, and the fitting is positioned on the mandrel assembly lever. The SOCKETLESS fitting is pushed into the hose by compressing the mandrel assembly lever.
Catalog Part No. Model Number SOCKETLESS Fitting Assembly Tool Price Description Wt. Each SOCKETLESS Fitting Assembly Tool for sizes -4, -6, -8 0.40
Fluid Conveying
C1CW78 FT1268
FT1268
1158
Technical Information Tubing Products

SSP Duolok Tube Fittings
WARNING
Refer to safety information regarding tubing starting on page 1365
Installation Instructions
1159

WARNING
Pre-setting Tool / Gap Gage
Fluid Conveying
1160

WARNING
Selection Guide for Instrumentation Fittings & Tubing
1161

WARNING
Fluid Conveying
1162

WARNING
1163

WARNING
Fluid Conveying
1164

Eaton 7000 Series Ermeto Tube Fittings
WARNING
1165

WARNING
TABLE 1: Number of Additional Turns from Ring Grip for Hand Presetting Operation-Ermeto Sleeve
Fluid Conveying
**C 1010 - Carbon Steel Tubing **MIL T 8504 - Annealed Stainless Steel
1166

WARNING
1167

WARNING
HYDRAULIC PRESSURE DATA - ERMETO FLARELESS FITTINGS
Consult tubing selection charts starting on page 1372
Fluid Conveying
Pressures shown do not apply to pneumatic applications or stainless steel tubing installations. * Zinc plating discolors at temperatures over 400F and melts at 750F.
1168
Notes
1169
Notes
1170
Notes
1171
Notes
1172
Notes
1173
Notes
1174
Category Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Felsted Control Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thread Sealants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thread Lockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Allied Witan Filter Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Denso Petrolatum Tape (Corrosion Protection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Boeshield T-9 Corrosion Shield. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anti-Seize Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCRUBS in-a-Bucket Hand Cleaner Towels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conbraco Y Strainers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hub City Splined Billets, Hubs, Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dill Tire Service Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Textbooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Boss Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Channellock Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Houston Pneumatic Vibrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable (Wire) Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hannay Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pressure Washer Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rawson Koenig Hydraulic Worm Gear Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kawasaki / Lantec Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CRC Chemical Maintenance Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lubrication Equipment & Accessories (Alemite, Lumax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1176 1208 1223 1226 1227 1227 1228 1228 1229 1229 1230 1230 1231 1231 1231 1232 1232 1233 1234 1235 1237 1238 1239 1246 1249 Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
1175
Seals
Hydraulic Power & Control Category Inch Sizes U-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vee Packing Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piston Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piston T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rod T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piston Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wear Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wiper Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quad Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar D-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rod Buffer Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piston Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back-Up Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Retainer Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Self Aligning Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metric Sizes Metric U-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assortment Kits & Tools Assortment Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cylinder Kits & Parts Cylinder Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1177 1179 1180 1180 1181 1181 1182 1182 1185 1185 1185 1186 1192 1198 1200 1200 1201 1202 1206
Fluid Conveying
1176
Seals
Inch Sizes
Polyurethane U-Seals
Catalog Part No. Model Number Cross Sect. (in)
1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16
C1DM95 U12-1.18
I.D. (in)
1-3/16 1-3/16 1-3/16 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 1-5/8 1-3/4 2 2-1/4 2-3/8 2-1/2 2-3/4 1-3/16 1-1/4 1-3/8 1/2 5/8 5/8 3/4 3/4 7/8 7/8 1 1 1 1 1-1/16 1-1/16 1-1/16 1-3/16 1-1/4 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-3/8 1-3/8 1-1/2 1-1/2 1-1/2 1-1/2 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 1-3/4
O.D. (in)
1-7/16 1-7/16 1-7/16 1-1/2 1-1/2 1-1/2 1-5/8 1-5/8 1-3/4 1-3/4 1-7/8 2 2-1/4 2-1/2 2-5/8 2-3/4 3 1-1/2 1-9/16 1-11/16 7/8 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-3/8 1-3/8 1-1/2 1-1/2 1-1/2 1-9/16 1-5/8 1-5/8 1-5/8 1-5/8 1-3/4 1-3/4 1-3/4 1-3/4 1-7/8 1-7/8 1-7/8 1-7/8 2 2 2 2 2 2-1/8
Ht H (in)
1/8 3/16 1/4 1/8 3/16 1/4 1/8 1/4 1/8 1/4 1/8 1/8 1/8 1/8 1/8 1/8 1/8 5/32 5/32 5/32 3/16 3/16 5/16 3/16 5/16 3/16 5/16 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/16 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/8 3/16 1/4 5/16 3/8 3/16 3/16 1/4 5/16 3/8 3/16
Wt.
0.25 0.15 0.20 0.20 0.01 0.10 0.01
Price Each
C1DM96 U12-1.18-18B C1DM97 U12-1.18-25B C1DN11 C1DM99 C1DN14 C1DN13 C1DN16 C1DN15 C1DN17 C1DN19 C1DN20 C1DN21 C1DN22 C1DN23 C1DN24 C1HH21 C1HH22 C1HH23 C1DN26 C1DN27 C1ZX37 C1DN29 C1DN28 C1DN31 C1DN30 C1DN35 C1DN32 C1DN33 C1DN34 C1DN37 C1DN36 C1ER50 C1DN38 C1DN42 C1DN39 C1DN40 C1DN41 C1DN46 C1DN43 C1DN44 C1DN45 C1DN50 C1DN47 C1DN48 C1DN49 C1DN51 C1ER51 C1DN52 C1DN53 C1DN54 C1DN58 U12-1.25-SQB U12-1.25-25B U12-1.37-SQB U12-1.37-25B U12-1.50-SQB U12-1.50-25B U12-1.62-SQB U12-1.75-SQB U12-2.00 U12-2.25 U12-2.37 U12-2.50 U12-2.75 U15-1.18 U15-1.25 U15-1.37 U18-0.50 U18-0.62-SQB U18-0.62-31B U18-0.75-SQB U18-0.75-31B U18-0.87-SQB U18-0.87-31B U18-1.00-SQB U18-1.00-25B U18-1.00-31B U18-1.00-37B U18-1.12-SQB U18-1.12-25B U18-1.12-31B U18-1.18 U18-1.25-SQB U18-1.25-25B U18-1.25-31B U18-1.25-37B U18-1.37-SQB U18-1.37-25B U18-1.37-31B U18-1.37-37B U18-1.50-SQB U18-1.50-25B U18-1.50-31B U18-1.50-37B U18-1.62 U18-1.62-SQB U18-1.62-25B U18-1.62-31B U18-1.62-37B U18-1.75-SQB C1DM98 U12-1.25-18B
Molded from tough, abrasion resistant polyurethane. The four lobed expander ring energizes the sealing tips, even at zero pressure, to help prevent "weeping" when the system is idle. Items with N suffix are made from 90 Durometer Nitrile. Items with V suffix are made from Fluorocarbon. Material: Urethane. Temperature Range: -65F to 220F. Pressure Range: 0 to 5,000 PSI. Standard Type: Height & cross section are equal. Deep Type: Height is greater than cross section. Type SQB: Height & cross section are equal. Beveled lip design provides superior film breaking. Type B: Height is greater than cross section. Beveled lip design provides superior film breaking. Polyurethane U-Seals
Catalog Part No. Model Number Cross Sect. (in)
1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8
0.01 0.10 0.01 0.01 0.01 0.01 0.15 0.01 0.01 0.01 0.20 0.01 0.05
Fluid Conveying
0.01 0.10 0.10 0.01 0.15 0.01 0.01 0.25 0.01 0.05 0.25 0.01 0.15 0.01 0.20 0.20 0.10 0.01 0.35 0.05 0.04 0.01 0.05 0.10 0.01 0.01 0.01 0.01 0.02 0.05 0.35 0.30 0.15
I.D. (in)
3/16 1/4 1/4 5/16 5/16 3/8 1/2 1/2 5/8 5/8 5/8 11/16 11/16 3/4 3/4 3/4 13/16 7/8 7/8 1 1 1 1-1/16 1-1/16 1-1/16
O.D. (in)
7/16 1/2 1/2 9/16 9/16 5/8 3/4 3/4 15/16 7/8 7/8 15/16 15/16 1 1 1 1-1/16 1-1/8 1-1/8 1-1/4 1-1/4 1-1/4 1-5/16 1-3/8 1-3/8
Ht H (in)
1/4 1/8 1/4 1/8 1/4 1/8 1/8 1/4 1/8 1/8 1/4 1/8 1/4 1/8 3/16 1/4 1/8 1/8 1/4 1/8 3/16 1/4 1/8 1/8 1/4
Wt.
0.20 0.05 0.01 0.10 0.20 0.01 0.15 0.30 0.01 0.01 0.01 0.02 0.10 0.02 0.15 0.01 0.01 0.15 0.01 0.01 0.20 0.25 0.10 0.25 0.05
Price Each
C1DM70 U12-0.18-25B C1DM72 U12-0.25-SQB C1DM71 U12-0.25-25B C1DM74 U12-0.31-SQB C1DM73 U12-0.31-25B C1DM75 U12-0.37 C1DM77 U12-0.50-SQB C1DM76 U12-0.50-25B C1DM78 U12-0.56 C1DM80 U12-0.62-SQB C1DM79 U12-0.62-25B C1DM81 U12-0.68 C1DM82 U12-0.68-25B C1DM85 U12-0.75-SQB C1DM83 U12-0.75-18B C1DM84 U12-0.75-25B C1DM86 U12-0.81 C1DM88 U12-0.87-SQB C1DM87 U12-0.87-25B C1DM91 C1DM90 U12-1.00-SQB U12-1.00-25B C1DM89 U12-1.00-18B C1DM92 U12-1.06-SQB C1DM94 U12-1.12-SQB C1DM93 U12-1.12-25B
1177
Seals
Inch Sizes
Catalog Part No.
C1DN55 C1DN56 C1DN57 C1DN60 C1DN59 C1DN63 C1DN61
Ht H (in)
1/4 5/16 3/8 3/16 3/8 3/16 5/16 3/8 3/16 1/4 3/16 3/8 3/16 3/16 1/4 5/16 3/8 3/16 3/8 3/16 3/8 3/16 3/16 3/8 3/16 3/8 3/8 3/16 3/8 3/8 1/4 1/4 1/4 3/8 1/4 3/8 1/4 1/4 3/8 1/4 3/8 1/4 5/16 3/8 1/4 1/4 3/8 3/8 1/4 5/16 3/8 3/8 1/4
Model Number
U18-1.75-25B U18-1.75-31B U18-1.75-37B U18-1.87-SQB U18-1.87-37B U18-2.00-SQB U18-2.00-31B U18-2.00-37B U18-2.12-SQB U18-2.12-25B U18-2.25-SQB U18-2.25-37B U18-2.37-SQB U18-2.50-SQB U18-2.50-25B U18-2.50-31B U18-2.50-37B U18-2.62-SQB U18-2.62-37B U18-2.75-SQB U18-2.75-37B U18-2.87 U18-3.00 U18-3.00-37B U18-3.12-SQB U18-3.12-37B U18-3.50-37B U18-3.62-SQB U18-3.62-37B U18-4.00-37B U25-0.75 U25-0.93 U25-1.00-SQB U25-1.00-37B U25-1.12 U25-1.12-37B U25-1.18 U25-1.25-SQB U25-1.25-37B U25-1.37 U25-1.37-37B U25-1.50-SQB U25-1.50-31B U25-1.50-37B U25-1.62 U25-1.75 U25-1.75-37B U25-1.87-37B U25-2.00-SQB U25-2.00-31B U25-2.00-37B U25-2.12-37B U25-2.25
Cross Sect. (in)

3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4
I.D. (in)
1-3/4 1-3/4 1-3/4 1-7/8 1-7/8 2 2 2 2-1/8 2-1/8 2-1/4 2-1/4 2-3/8 2-1/2 2-1/2 2-1/2 2-1/2 2-5/8 2-5/8 2-3/4 2-3/4 2-7/8 3 3 3-1/8 3-1/8 3-1/2 3-5/8 3-5/8 4 3/4 13/16 1 1 1-1/16 1-1/16 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-1/2 1-1/2 1-5/8 1-3/4 1-3/4 1-7/8 2 2 2 2-1/8 2-1/4
O.D. (in)
2-1/8 2-1/8 2-1/8 2-1/4 2-1/4 2-3/8 2-3/8 2-3/8 2-1/2 2-1/2 2-5/8 2-5/8 2-3/4 2-7/8 2-7/8 2-7/8 2-7/8 3 3 3-1/8 3-1/8 3-1/4 3-3/8 3-3/8 3-1/2 3-1/2 3-7/8 4 4 4-3/8 1-1/4 1-7/16 1-1/2 1-1/2 1-5/8 1-5/8 1-3/4 1-3/4 1-7/8 1-7/8 2 2 2 2-1/8 2-1/4 2-1/4 2-3/8 2-1/2 2-1/2 2-1/2 2-5/8 2-3/4
Price Wt. Each

0.40 0.15 0.03 0.35 0.25 1.50 0.01 0.20 0.01 0.02 0.23 0.01 0.05 0.01 0.02 0.30 0.30 0.01 0.20 0.01 0.25 0.10 0.02 0.01 0.01 0.03 0.40 0.01 0.55 0.04 0.01 0.01 0.01 0.10 0.05 0.01 0.01 0.10 0.02 0.25 0.05 0.10 0.50 0.05 0.02 0.10 0.02 0.25 0.10 0.03 0.10 0.01 0.02
Catalog Part No.

C1DP32 C1DP34 C1DP37 C1DP35 C1DP39 C1DP41 C1DP40 C1DP42 C1DP43 C1DP46 C1DP48 C1DP50 C1DP49 C1DP52 C1KN66 C1DP56 C1DP53 C1DP54 C1DP55 C1DP60 C1DP61 C1DP63 C1DP64 C1DP65 C1DP67 C1DP68 C1DP69 C1DP73 C1DP74 C1DP75 C1DP85 C1DP87 C1DP89 C1DP88 C1DP91 C1DP90 C1DP92 C1DP97 C1DP98 C1DP99 C1DQ11 C1DQ14 C1DQ15 C1DQ16 C1DQ17 C1DQ19 C1DQ20 C1DQ21 C1DQ26 C1DQ32 C1GK82 C1ER52 C1DQ35
Model Number
U25-2.25-37B U25-2.37-37B U25-2.50-SQB U25-2.50-37B U25-2.62-37B U25-2.75-SQB U25-2.75-37B U25-3.00 U25-3.00-37B U25-3.25-37B U25-3.50 U25-3.50-SQB U25-3.50-37B U25-3.75-SQB U25-3.75-37B U25-4.00-SQB U25-4.00-37B U25-4.00-50D U25-4.00-56B U25-4.50 U25-4.50-37B U25-4.50-56B U25-4.50-62B U25-4.62-SQB U25-4.75-37B U25-5.00 U25-5.00-37B U25-5.50 U25-5.50-37B U25-5.50-56B U31-1.00-50B U31-1.25 U31-1.25-SQB U31-1.25-37B U31-1.37-SQB U31-1.37-37B U31-1.50 U31-1.75-37B U31-1.87 U31-2.00 U31-2.00-50B U31-2.25-50B U31-2.37 U31-2.50 U31-2.50-50B U31-2.75 U31-2.75-50B U31-2.87 U31-3.37-50B U31-4.00 U31-4.00-56B U31-4.37 U31-4.50
Cross Sect. (in)

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16
I.D. (in)
2-1/4 2-3/8 2-1/2 2-1/2 2-5/8 2-3/4 2-3/4 3 3 3-1/4 3-1/2 3-1/2 3-1/2 3-3/4 3-3/4 4 4 4 4 4-1/2 4-1/2 4-1/2 4-1/2 4-5/8 4-3/4 5 5 5-1/2 5-1/2 5-1/2 1 1-1/4 1-1/4 1-1/4 1-3/8 1-3/8 1-1/2 1-3/4 1-7/8 2 2 2-1/4 2-3/8 2-1/2 2-1/2 2-3/4 2-3/4 2-7/8 3-3/8 4 4 4-3/8 4-1/2
O.D. (in)
2-3/4 2-7/8 3 3 3-1/8 3-1/4 3-1/4 3-1/2 3-1/2 3-3/4 4 4 4 4-1/4 4-1/4 4-1/2 4-1/2 4-1/2 4-1/2 5 5 5 5 5-1/8 5-1/4 5-1/2 5-1/2 6 6 6 1-5/8 1-7/8 1-7/8 1-7/8 2 2 2-1/8 2-3/8 2-1/2 2-5/8 2-5/8 2-7/8 3 3-1/8 3-1/8 3-3/8 3-3/8 3-1/2 4 4-5/8 4-5/8 5 5-1/8
Ht H (in)
3/8 3/8 1/4 3/8 3/8 1/4 3/8 1/4 3/8 3/8 1/4 1/4 3/8 1/4 3/8 1/4 3/8 1/2 9/16 1/4 3/8 9/16 5/8 1/4 3/8 1/4 3/8 1/4 3/8 9/16 1/2 5/16 5/16 3/8 5/16 3/8 5/16 3/8 5/16 5/16 1/2 1/2 5/16 5/16 1/2 5/16 1/2 5/16 1/2 5/16 9/16 5/16 5/16
Wt.
0.03 0.45 0.15 0.01 0.07 0.02 0.05 0.15 0.04 0.05 0.02 0.01 0.05 0.25 0.04 0.04 0.05 0.65 0.55 0.10 0.15 0.09 1.10 0.50 0.25 0.05 0.10 0.01 0.01 0.25 0.05 0.45 0.10 0.50 0.02 0.50 0.10 0.02 0.03 0.30 0.01 0.05 0.06 0.10 0.04 0.05 0.01 0.05 0.01 0.05 0.09 0.10 0.05
Price Each
C1DN62 C1DN65 C1DN64 C1DN68 C1DN67 C1DN69 C1DN73 C1DN70 C1DN71 C1DN72 C1DN75 C1DN74 C1DN77
Fluid Conveying
C1DN76 C1DN78 C1DN79 C1DN80 C1DN82 C1DN81 C1DN86 C1DN89 C1DN88 C1DN92 C1DN94 C1DN96 C1DN98 C1DN97 C1DN99 C1DP11 C1DP12 C1DP14 C1DP13 C1DP15
1-3/16 1-11/16
C1DP16 C1DP19 C1DP17 C1DP18 C1DP20 C1DP22 C1DP23 C1DP25 C1DP28 C1DP26 C1DP27 C1DP30 C1DP31
1178
Seals
Inch Sizes
Catalog Part No.
C1DQ40 C1DQ45 C1DQ51 C1DQ54 C1DQ56 C1DQ58 C1DQ60 C1DQ64 C1DQ66 C1DQ69 C1DQ67 C1DQ68 C1DQ70 C1EV13 C1DQ77 C1DQ78 C1DQ80 C1DQ81 C1DQ82
Model Number
U37-1.25 U37-1.75 U37-2.50-50B U37-2.75 U37-3.00-SQB U37-3.25-50B U37-3.50 U37-3.75-50D U37-4.00-62B U37-4.25-SQB U37-4.25-50D U37-4.25-62B U37-4.50-62B U37-5.00-62B U37-5.25 U37-5.25-50D U37-6.25-50D U50-2.00-SQB U50-2.50
Cross Sect. (in)

3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2
Vee Packing Sets

Ht H (in)
3/8 3/8 1/2 3/8 3/8 1/2 3/8 1/2 5/8 3/8 1/2 5/8 5/8 5/8 3/8 1/2 1/2 1/2 1/2
I.D. (in)
1-1/4 1-3/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/4 4-1/4 4-1/2 5 5-1/4 5-1/4 6-1/4 2 2-1/2
O.D. (in)
2 2-1/2 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 4-3/4 5 5 5 5-1/4 5-3/4 6 6 7 3 3-1/2
Price Wt. Each

0.10 0.15 0.01 0.10 0.07 0.25 0.04
0.15 0.13 0.09 0.10 0.08 1.50 0.17 0.10 0.15 0.17 0.08 0.75
Homogeneous Buna-N U-Seals
All sets include fabric reinforced rubber vee cups. When feasible, one or two urethane vee rings are included to improve low pressure sealing. Most sets use nylon adaptors. Material: Fabric reinforced rubber & urethane vee rings, nylon top and bottom adaptors. Temperature Range: -65F to 220F. Pressure Range: 0 to 3000 PSI (4 Vees). 0 to 5000 PSI (5 Vees). 0 to 10,000 PSI (6 Vees). Construction Code: 1st number in Code is quantity of Top nylon adaptors (usually 1). 2nd number is quantity of Urethane vee rings. 3rd number is quantity of Fabric vee rings. 4th number is quantity of Bottom nylon adaptors (usually 1). Vee Packing Sets
Catalog Part No.
C1DR63
Fluid Conveying
Model Number
VS06204X100 VS07504X100 VS08104X087 VS08704X100 VS10003X095 VS10004X100 VS10005X103 VS11204X087 VS11205X103 VS12504X082 VS15004X082 VS15004X100 VS15004X112 VS16205X103 VS17504X100 VS17505X103 VS20004X087 VS20004X100 VS20004X112 VS20005X103 VS20006X118 VS22504X082 VS22504X100 VS22505X103
Code TUFB
1051 1051 1041 1041 1231 1051 1041 1041 1041 1221 1041 1231 1241 1041 1051 1221 1221 1231 1331 1041 1221 1131 1231 1041
I.D. (in)
5/8 3/4 13/16 7/8 1 1 1 1-1/8 1-1/8 1-1/4 1-1/2 1-1/2 1-1/2 1-5/8 1-3/4 1-3/4 2 2 2 2 2 2-1/4 2-1/4 2-1/4
O.D. Price (in) Ht (in) Wt. Each

1-1/8 1-1/4 1-5/16 1-3/8 1-3/8 1-1/2 1-5/8 1-5/8 1-3/4 1-3/4 2 2 2 2-1/4 2-1/4 2-3/8 2-1/2 2-1/2 2-1/2 2-5/8 2-3/4 2-3/4 2-3/4 2-7/8 1 1 7/8 1 61/64 1 1-1/32 7/8 1-1/32 13/16 13/16 1 1-1/8 1-1/32 1 1-1/32 7/8 1 1-1/8 1-1/32 1-3/16 13/16 1 1-1/32 0.05 0.35 0.50 0.01 0.35 0.05 0.35 0.04 0.15 0.15 0.05 0.20 0.35 0.10 0.07 0.20 0.10 0.50 0.50 0.11 0.14 0.25 0.08 0.10
Style HRU u-seals are precision molded from 80 Durometer Buna-N rubber. Sizes include those found in Army-Navy spec. AN6226 and narrow cross-section sizes found in JIC cylinders and the popularly termed "Huva Cup". EP suffix signifies Ethylene Propylene. V suffix signifies Fluorocarbon. Material: 80 Durometer Rubber. Temperature Range: -40F to 250F. Pressure Range: 0 to 1,000 PSI. Homogeneous Buna-N U-Seals
Catalog Part No.
C1CY65
C1DR64 C1DR66 C1DR68 C1DR69 C1DR70 C1DR71 C1DR72 C1DR73 C1DR74 C1DR77 C1DR78 C1DR79
Model Number
HRU15-1.18-15
Cross Sect. (in)

5/32
I.D. (in)
1-3/16
O.D. (in)
1-1/2
Ht H (in)
5/32
Price Wt. Each

0.01
C1DR83 C1DR84 C1DR85 C1DR87 C1DR88 C1DR89 C1DR90 C1DR91 C1DR94 C1DR95 C1DR96
1179
Seals
Inch Sizes
Vee Packing Sets
Catalog Part No.
C1DR97 C1DS12 C1DS16 C1DS17 C1DS19 C1DS20 C1DS21 C1DS22 C1DS24 C1DS25 C1DS27 C1DS28 C1DS31 C1DS33 C1DS34 C1DS36 C1DS40 C1DS42 C1DS44
Model Number
VS22506X100 VS25004X082 VS27506X118 VS30004X087 VS32506X118 VS32506X137 VS35004X075 VS35004X100 VS37504X100 VS37506X118 VS40004X100 VS40004X112 VS45004X100 VS47504X100 VS47506X118 VS50004X112 VS60004X100 VS70004X100 VS80004X100
Code TUFB
1031 1041 1221 1041 1041 1051 1121 1231 1231 1221 1231 1241 1051 1051 1221 1241 1231 1231 1231
I.D. (in)
2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/4 3-1/2 3-1/2 3-3/4 3-3/4 4 4 4-1/2 4-3/4 4-3/4 5 6 7 8
O.D. Price (in) Ht (in) Wt. Each

3 3 3-1/2 3-1/2 4 4 4 4 4-1/4 4-1/2 4-1/2 4-1/2 5 5-1/4 5-1/2 5-1/2 6-1/2 7-1/2 8-1/2 1 13/16 1-3/16 7/8 1-3/16 1-3/8 3/4 1 1 1-3/16 1 1-1/8 1 1 1-3/16 1-1/8 1 1 1 0.14 0.08 0.50 0.10 0.24 0.15 0.10 0.13 0.10 0.20 0.15 0.20 0.10 0.01 0.35 0.21 0.22 0.25 0.50
Piston T-Seals
T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a groove comparable to size required for an o-ring. T-Seals are non-spiraling and extrusion resistant to 10,000 PSI. Material: Hard plastic back-up rings. Buna-N rubber seal. Temperature Range: -65F to 220 F. Pressure Range: 0 to 10,000 PSI. Piston T-Seals
Bore Catalog Dia. Part No. Model Number (in)
C1DM26 C1DM28 C1DM29 C1DM30 C1DM32 C1DM33 C1DM34 C1DM36 C1DM38 C1DM39 C1DM40 TP-019 TP-024 TP-026 TP-028 TP-031 TP-032 TP-035 TP-039 TP-047 TP-051 TP-055 1-1/2 2 2-1/4 2-1/2 2-7/8 3 3-1/2 4 5 5-1/2 6
Fluid Conveying
Cotton Fabric & Rubber Piston Cups
O-Ring Groove Dash No.

-218 -326 -328 -330 -333 -334 -338 -342 -350 -429 -433
Wt.
0.10 0.10 0.35 0.25 0.25 0.25 0.35 0.35 0.35 0.10 0.20
Price Each
Material: Cotton fabric & rubber. Temperature Range: -65 to 220F. Pressure Range: 0 to 3000 PSI. Note: Hole is punched if hole size listed in table. Cotton Fabric & Rubber Piston Cups
Catalog Part No.
C1CB74 C1CB75 C1CB82
Model Number
9125-000F 9150-000F 9200-000F 9250-000F 9300-000F 9400-000F
Bore Hole Dia. Lip Ht Thick Size (in) (in) (in) (in)
1-1/4 1-1/2 2 2-1/2 3 4 7/16 1/2 1/2 1/2 5/8 5/8 3/32 1/8 1/8 1/8 5/32 5/32 -------
Wt.
0.01 0.10 0.03 0.04 0.08 0.14
Price Each
C1CC42 C1CC52 C1CC63
1180
Seals
Inch Sizes
Rod T-Seals
Cast Iron Piston Rings
T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a groove comparable to size required for an o-ring. T-Seals are non-spiraling and extrusion resistant to 10,000 PSI. Material: Hard plastic back-up rings. Buna-N rubber seal. Temperature Range: -65F to 220 F. Pressure Range: 0 to 10,000 PSI. Rod T-Seals
Rod Catalog Dia. Part No. Model Number (in)
C1DM44 C1DM52 C1FD17 C1DM55 TR-008 TR-027 TR-029 TR-032 5/8 2 2-1/4 2-5/8
O-Ring Groove Dash No.

-208 -329 -331 -334
Wt.
0.25 0.05 0.02 0.15
Price Each
Material: Cast Iron. When using cast iron piston rings, it is crucial to use the correct groove design for proper performance of the cylinder. Please use the following guidelines when cutting a cast iron piston ring groove. Groove Width: To permit the ring to slide freely into the groove, the groove must be at least 0.001 inches wider than the maximum piston ring width with a tolerance of +0.003/-0 inches. Groove Depth: Grooves must be at least 0.015 inches deeper than the maximum radial wall thickness of the piston ring with a tolerance of +0.003/-0 inches. This is to avoid any possibility of the ring bottoming in the groove when the ring is compressed to its working diameter. Radial Clearance: The radial clearance between the cylinder bore and piston should be less than 1/3 of the radial wall thickness of the piston ring to ensure sealing effectiveness. Cast Iron Piston Rings
Catalog Part No.
C1DK99 C1DL12 C1GG42
Model Number
SPR-4002 SPR-6004 SPR-7002
O.D. (in)
4.000 6.000 7.000
Wall Width Thickness (in) (in)

0.186 0.187 0.310 0.311 0.248 0.249 0.127/0.142 0.191/0.206 0.228/0.243
Wt.
0.01 0.15 0.32
Price Each
1181
Seals
Inch Sizes
Nylon Wear Rings Urethane Wiper Rings Style AN
Made of glass reinforced nylon with physical properties equivalent to bronze. Highly recommended due to low wear rate, non-scoring properties and ability to ingest metal chips. SC suffix designates a scarf cut design. ST suffix designates a step cut design. Temperature Range: -40F to 250F. Tensile Strength: 27,000 PSI. Compressive Strength: 35,000 PSI. Nylon Wear Rings
Catalog Part No.
C1BW37 C1FW63 C1BW41
Material: Urethane. Temperature Range: -65F to 220F. Note: SH suffix designates slotted heel design. V suffix designates fluorocarbon material. B suffix designates carboxilated nitrile material. Urethane Wiper Rings Style AN
Catalog Part No.
C1CH85 C1CH86 C1CH87 C1CH88 C1CH89 C1CH90 C1CH91 C1CH92 C1CH93 C1CH95 C1CH96 C1CH97 C1CH98 C1CH99 C1CJ11 C1CJ12 C1CJ13 C1CJ14 C1CJ15 C1CJ16 C1CJ17 C1CJ18 C1CJ19 C1CJ20 C1CJ23 C1CJ24 C1CJ26 C1CJ27 C1CJ28 C1CJ30 C1CJ32 C1CJ33
Model Number
612-200-050 612-225-050 612-250-050 612-275-050 612-300-050 612-325-050 612-350-050 612-375-050 612-400-050 612-450-050 612-500-050 612-550-050 612-600-050 612-700-050 612-200-037 612-200-062 612-250-037 612-250-062 612-300-037 612-350-037 612-400-062 612-400-037 612-600-062 612-600-037 612-200-075 612-225-075 612-250-075 612-300-075 612-350-075 612-400-075 612-450-075 612-500-075 612-600-075 612-275-100 612-300-100 612-500-100
Thickness Width O.D. (in) (in) (in)

1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/8 5/8 3/8 5/8 3/8 3/8 5/8 3/8 5/8 3/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/2 5 5-1/4 6 7 2 2 2-1/2 2-1/2 3 3-1/2 4 4 6 6 2 2-1/4 2-1/2 3 3-1/2 4 4-1/2 5 6 2-3/4 3 5
Wt.
0.02 0.02 0.01 0.04 0.05 0.01 0.25 0.04 0.05 0.05 0.05 0.06 0.07 0.09 0.01 0.10 0.02 0.05 0.02 0.05 0.05 0.03 0.01 0.15 0.05 0.03 0.04 0.25 0.05 0.06 0.10 0.08 0.09 0.05 0.06 0.11
Price Each
Model Number
AN-01 AN-02 AN-03 AN-04 AN-05 AN-06 AN-07 AN-08 AN-09 AN-11 AN-12 AN-13 AN-15 AN-16 AN-17 AN-18 AN-19 AN-20 AN-21 AN-22 AN-23 AN-24 AN-25 AN-26 AN-29 AN-31 AN-33 AN-35 AN-37 AN-41 AN-45 AN-49
Rod Groove Groove Dia. A O.D. B Width C (in) (in) (in)

0.498 0.560 0.623 0.685 0.748 0.810 0.873 0.935 0.998 1.123 1.185 1.248 1.373 1.435 1.498 1.623 1.748 1.873 1.998 2.123 2.248 2.373 2.498 2.623 2.997 3.247 3.497 3.747 3.997 4.497 4.997 5.497 0.760 0.823 0.885 0.948 1.010 1.084 1.147 1.209 1.272 1.397 1.459 1.522 1.677 1.739 1.802 1.927 2.052 2.177 2.302 2.427 2.552 2.677 2.802 2.989 3.364 3.614 3.864 4.114 4.427 4.927 5.427 5.927 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.104 0.119 0.119 0.119 0.119 0.119 0.135 0.135 0.135 0.135
Wt.
0.03 0.01 0.01 0.02 0.01 0.20 0.02 0.01 0.01 0.01 0.03 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.25 0.01 0.01 0.10 0.02 0.02 0.02 0.03 0.10
Price Each
Fluid Conveying
C1KK53 C1BW45 C1BW48 C1BW50 C1FE81 C1BW53 C1BW56 C1GH59 C1KK57 C1BW62 C1KK58 C1BW36 C1BW38 C1BW40 C1BW42 C1BW44 C1BW49 C1BW54 C1BW52 C1BW63
C1BW61 C1BW39 C1KK52 C1BW43 C1BW47 C1BW51 C1GM70 C1BW58 C1GM71 C1GM72 C1KK54 C1KK55 C1BW59
1182
Seals
Inch Sizes
Urethane Wiper Rings Style BT
Metal Clad Urethane Wiper Rings
Material: Urethane. Temperature Range: -65F to 220F. Urethane Wiper Rings Style BT
Catalog Part No.
C1CL80 C1CL83 C1CL85
Model Number
BT10060 BT10860 BT20060
Rod Wiper Base Dia. A O.D. B Thickness C (in) (in) (in)

1 1-1/2 2 1-3/8 1-7/8 2-3/8 3/16 3/16 3/16
Wt.
0.05 0.10 0.01
Price Each
90A Durometer urethane lip securely bonded to sturdy metal case. Non-abrasive and highly effective in removing dirt and contaminants from the rod. Material: Urethane. Temperature Range: -65F to 220F. Metal Clad Urethane Wiper Rings
Catalog Part No.
C1DE14 C1DE15 C1DE16 C1DE17 C1DE18 C1DE19 C1DE20 C1DE24 C1DE34 C1DE36
Model Number
MCU-0750-G MCU-0875-G MCU-1000-G MCU-1120-G MCU-1187-G MCU-1250-G MCU-1375-G MCU-1506-G MCU-2006-G MCU-2250-G MCU-2252-G MCU-2375-G MCU-2376-G MCU-2503-G MCU-3506-G MCU-4005-G MCU-5000-G
Rod Wiper Dia. A O.D. B (in) (in)

3/4 7/8 1 1-1/8 1-3/16 1-1/4 1-3/8 1-1/2 2 2-1/4 2-1/4 2-3/8 2-3/8 2-1/2 3-1/2 4 5 1-1/4 1-3/8 1-1/2 1-5/8 1-5/8 1-3/4 1-7/8 2-1/4 2-11/16 2-3/4 3 2-7/8 3-1/8 3 4-1/8 4-5/8 5-3/4
Ht C (in)
5/16 5/16 5/16 5/16 1/4 5/16 5/16 3/8 3/8 5/16 1/4 5/16 3/8 3/16 5/16 5/16 5/16
Wt.
0.35 0.02 0.03 0.10 0.02
Price Each
Metal Clad Rubber Wiper Rings
Fluid Conveying
0.01 0.03 0.06 0.01 0.04 0.25 0.06 0.10 0.05 0.11 0.01 0.19
Material: Rubber. Temperature Range: -40F to 240F. Metal Clad Rubber Wiper Rings
Catalog Part No.
C1DD79 C1DD80 C1DD81 C1DD82 C1DD84 C1DD85 C1DD86 C1DD87 C1DD88 C1DD89 C1DD90 C1DD91 C1DD92 C1DD94 C1DD95 C1DD96 C1DD97 C1DD99 C1DE12
C1DE37 C1DE38 C1DE39 C1DE44 C1DE57 C1DE62 C1DE69
Model Number
MCN-0626 MCN-1001 MCN-1003 MCN-1005 MCN-1253 MCN-1254 MCN-1375 MCN-1502 MCN-1503 MCN-1504 MCN-1753 MCN-1754 MCN-1755 MCN-2001 MCN-2002 MCN-2003 MCN-2253 MCN-2501 MCN-3001
Rod Wiper Dia. A O.D. B (in) (in)

5/8 1 1 1 1-1/4 1-1/4 1-3/8 1-1/2 1-1/2 1-1/2 1-3/4 1-3/4 1-3/4 2 2 2 2-1/4 2-1/2 3 7/8 1-1/4 1-3/8 1-1/2 1-11/16 1-3/4 1-3/4 1-7/8 1-7/8 2 2-1/8 2-1/4 2-3/8 2-3/8 2-5/8 2-1/2 2-3/4 3 3-1/2
Ht C (in)
1/8 1/8 3/16 3/16 3/16 1/4 3/16 1/4 3/16 1/4 3/16 1/4 1/4 3/16 1/4 1/4 1/4 1/4 1/4
Wt.
0.05 0.01 0.10 0.02 0.01 0.01 0.01 0.10 0.01
Price Each
0.05 0.02 0.10 0.04 0.02 0.04 0.04 0.04 0.05 0.01
1183
Seals
Inch Sizes
Urethane Wiper Rings Style ST
Catalog Part No.
C1DL26 C1DL27 C1DL28 C1DL30 C1DL31 C1DL32 C1DL33 C1DL35 C1DL36 C1DL37 C1DL40 C1DL41 C1DL43 C1DL44 C1DL46 C1DL48 C1DL49 C1DL51
Heavy Duty Metal Clad Urethane Wiper Rings
Model Number
ST-118 ST-125 ST-137 ST-150 ST-162 ST-175 ST-187 ST-200 ST-212 ST-225 ST-250 ST-275 ST-300 ST-325 ST-350 ST-375 ST-400 ST-450

1-3/16 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/2 1-9/16 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-1/2 2-5/8 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 5-1/4 3/16 3/16 3/16 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8
Wt.
0.25 0.01 0.01 0.01 0.01 0.01 0.04 0.02 0.01 0.03 0.05 0.15 0.01 0.04 0.45 0.01 0.35 0.95
Price Each
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in Heavy-Duty U-Seals. Built for severe service, these wipers are capable of surviving hostile environments. Material: Urethane. Temperature Range: -65F to 220F. Heavy Duty Metal Clad Urethane Wiper Rings
Catalog Part No.
C1KM74 C1KM75 C1GK26 C1KG30 C1KH35 C1GK27 C1KM76
Model Number
MCU-0625-D MCU-1500-D MCU-1751-D MCU-2000-D MCU-2500-D MCU-2750-D MCU-3000-D
Rod Wiper Dia. A O.D. B (in) (in) Ht C (in)

5/8 1-1/2 1-3/4 2 2-1/2 2-3/4 3 1-1/8 2 2-1/4 2-1/2 3 3-1/4 3-1/2 5/16 1/4 1/4 5/16 5/16 5/16 5/16
Wt.
0.02 0.03 0.03 0.05 0.06 0.07 0.08
Price Each
Fluid Conveying
Urethane Wiper Rings Style KW
Urethane Wiper Rings Style ST

Material: Urethane. Temperature Range: -65F to 220 F. Urethane Wiper Rings Style KW
Catalog Part No.
C1DC94
Model Number
KW-0750 KW-0875 KW-1000 KW-1250 KW-1375 KW-1500 KW-1750 KW-2000 KW-2500 KW-3000

3/4 7/8 1 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/2 3 1-1/8 1-1/4 1-3/8 1-5/8 1-3/4 1-7/8 2-1/8 2-3/8 3 3-1/2 0.190 0.190 0.190 0.190 0.190 0.190 0.190 0.190 0.250 0.250
Wt.
0.03 0.05 0.01 0.02 0.05 0.02 0.05 0.02 0.08 0.06
Price Each
Precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. V suffix designates fluorocarbon construction. Material: Urethane or Fluorocarbon (if V suffix). Temperature Range: Urethane -65F to 220F. Fluorocarbon -20F to 400F. Urethane Wiper Rings Style ST
Catalog Part No.
C1DL53 C1DL54 C1DL55 C1DL56 C1DL24 C1DL25
C1DC95 C1DC96 C1DC98 C1DC99 C1DD11 C1DD13 C1DD14 C1DD16 C1DD18
Model Number
ST-50 ST-62 ST-75 ST-87 ST-100 ST-112

1/2 5/8 3/4 7/8 1 1-1/8 3/4 7/8 1-1/8 1-1/4 1-3/8 1-1/2 1/8 1/8 3/16 3/16 3/16 3/16
Wt.
0.20 0.15 0.01 0.03 0.01 0.01
Price Each
1184
Seals
Inch Sizes
Buna-N Quattro Rings Style QR
Caterpillar D-Rings
The four lobed design of these seals provide twice the sealing surface of ordinary o-rings. They can be used in a variety of static and dynamic sealing applications including rotary, reciprocating or oscillating motion. Material: Buna-N. Temperature Range: -40F to 240F. Pressure Range: Varies according to diametral clearance. Buna-N Quattro Rings Style QR
Catalog Part No.
C1FC63 C1FC68 C1FC69 C1FC74 C1FC77 C1FC78 C1FC79 C1FC80 C1FC81 C1FC82 C1FC83 C1FC84 C1FC87 C1FC89 C1FC90 C1FC91 C1FC92 C1FC93 C1FC94 C1FC95 C1FC96 C1FC97 C1FC98
Note: Caterpillar part numbers are used as a reference only. It is not implied that these parts are original replacement parts. Caterpillar D-Rings
Catalog Part No.
C1EW59 C1EW60
Model Number
CTC-1P3702 CTC-1P3703 CTC-1P3704 CTC-1P3705
I.D. (mm)
25.4 31.9 38.2 44.7
Wt.
0.01 0.01 0.01 0.02
Price Each
Model Number
QR-4005 QR-4010 QR-4011 QR-4016 QR-4110 QR-4111 QR-4112 QR-4113 QR-4114 QR-4115 QR-4116 QR-4117 QR-4120 QR-4210 QR-4211 QR-4212 QR-4213 QR-4214 QR-4215 QR-4216 QR-4217 QR-4218 QR-4219
Dash Size
-005 -010 -011 -016 -110 -111 -112 -113 -114 -115 -116 -117 -120 -210 -211 -212 -213 -214 -215 -216 -217 -218 -219
Pkg. Qty
6 6 6 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 4 4 4 4
Wt.
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
Price Each
C1EW61 C1EW62
Rod Buffer Seals Style KR

Fluid Conveying
Style KR rod buffers utilize a 40% bronze filled PTFE cap with an o-ring energizer. Material: Bronze filled PTFE cap, rubber energizer. Temperature Range: -65F to 220F. Pressure Range: 0 to 5,000 PSI. Rod Buffer Seals Style KR
Catalog Part No.
C1GG26
Model Number
KR-25002
Rod Dia Seal (in) Width (in)

2-1/2 0.155 0.005
Wt.
0.02
Price Each
1185
Seals
Inch Sizes
Glass Filled PTFE Piston Seals Style 1400

Glass filled PTFE for low breakaway and low running friction. Popular choice of many cylinder manufacturers. Rubber energizer under seal assures positive contact with the dynamic surfaces. Piston diameter F dimensions are given for pistons without wear rings. Material: 15% glass filled PTFE seal with rubber energizer. Temperature Range: -40F to 220F. Pressure Range: 0 to 5,000 PSI.

Catalog Part No. Model Number Bore Dia. A (in) 0.002 1.500 1.625 1.750 2.000 2.250 2.500 2.750 3.000 3.250 3.500 3.750 4.000 4.500 5.000 6.000 Seal Height B & Cross Section C Groove Width D (in) (in) 0.002 0.070 0.005 0.109 0.010 0.109 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.115 0.010 0.143 0.010 0.083 0.122 0.122 0.129 0.129 0.129 0.129 0.129 0.129 0.129 0.129 0.129 0.129 0.129 0.159 Groove Dia. E (in) 0.002 1.240 1.233 1.358 1.608 1.858 2.108 2.358 2.608 2.858 3.108 3.358 3.608 4.108 4.608 5.482 Piston Dia. F (in) 0.001 1.497 1.622 1.747 1.996 2.246 2.496 2.746 2.996 3.246 3.496 3.746 3.996 4.496 4.996 5.996 Wt. 0.01 0.01 0.01 0.01 0.01 0.15 0.01 0.01 0.10 0.02 0.09 0.02 0.25 0.01 0.05 Price Each
C1DH42 PS1400-24 C1DH43 PS1400-26 C1DH44 PS1400-28 C1DH45 PS1400-32 C1DH47 PS1400-36 C1DH48 PS1400-40 C1DH49 PS1400-44 C1DH50 PS1400-48 C1DH51 PS1400-52 C1DH52 PS1400-56 C1DH53 PS1400-60 C1DH54 PS1400-64 C1DH56 PS1400-72 C1DH57 PS1400-80 C1DH60 PS1400-96
Fluid Conveying
1186
Seals
Inch Sizes

Material: 15% glass filled PTFE seal. Rubber energizer. Temperature Range: -40F to 220F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.

Catalog Part No. Model Number Bore Dia. A (in) 0.001 2.000 2.250 2.500 2.750 3.000 3.250 3.500 4.000 4.250 Seal Height B Seal Cross Groove Width Groove Dia. E Piston Dia. F (in) +0.005 Section C (in) D (in) +0.003 (in) +0.0 (in) -0.0 +0.005 -0.0 -0.0 -0.003 0.120 0.120 0.120 0.150 0.150 0.150 0.150 0.150 0.150 0.055 0.055 0.055 0.085 0.085 0.085 0.085 0.085 0.085 0.126 0.126 0.126 0.157 0.157 0.157 0.157 0.157 0.157 1.723 1.937 2.223 2.348 2.603 2.853 3.103 3.600 3.853 1.999 +0/-0.003 2.249 +0/-0.003 2.499 +0/-0.003 2.749 +0/-0.004 2.999 +0/-0.004 3.249 +0/-0.004 3.499 +0/-0.004 3.999 +0/-0.004 4.249 +0/-0.004 Wt. 0.10 0.01 0.01 Price Each
C1DH63 PS1600-32 C1DH64 PS1600-36 C1DH65 PS1600-40 C1DH66 PS1600-44 C1DH67 PS1600-48 C1DH68 PS1600-52 C1DH69 PS1600-56 C1DH70 PS1600-64 C1DH71 PS1600-68
Fluid Conveying
0.02 0.10 0.02 0.02 0.02 0.03
1187
Seals
Inch Sizes

Material: 15% glass filled PTFE seal. Rubber energizer. Temperature Range: -40F to 220F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.

Catalog Part No. Model Number Bore Dia. A (in) 0.002 1.250 1.500 2.000 2.250 2.500 3.000 3.500 4.000 4.250 4.500 5.000 5.500 6.000 Seal Height B Seal Cross Groove Width Groove Dia. E Piston Dia. F (in) Section C (in) D (in) 0.002 (in) 0.004 (in) 0.116-0.121 0.116-0.121 0.116-0.121 0.116-0.121 0.116-0.121 0.269-0.274 0.269-0.274 0.269-0.274 0.269-0.274 0.269-0.274 0.269-0.274 0.362-0.367 0.362-0.367 0.067-0.073 0.067-0.073 0.067-0.073 0.067-0.073 0.067-0.073 0.087-0.093 0.087-0.093 0.087-0.093 0.087-0.093 0.087-0.093 0.087-0.093 0.137-0.147 0.137-0.147 0.129 0.129 0.129 0.129 0.129 0.284 0.284 0.284 0.284 0.284 0.284 0.379 0.379 0.940 1.190 1.690 1.940 2.190 2.440 2.940 3.440 3.690 3.940 4.440 4.738 5.238 1.249 +0/-0.005 1.499 +0/-0.005 1.999 +0/-0.005 2.249 +0/-0.005 2.499 +0/-0.005 2.999 +0/-0.006 3.499 +0/-0.006 3.999 +0/-0.006 4.249 +0/-0.006 4.499 +0/-0.006 4.999 +0/-0.006 5.499 +0/-0.007 5.999 +0/-0.007 Wt. 0.01 0.01 0.01 0.01 0.01 0.04 0.01 0.05 0.06 0.03 0.07 0.13 0.14 Price Each
C1DH73 PS1800-20 C1DH74 PS1800-24 C1DH75 PS1800-32
Fluid Conveying
C1DH76 PS1800-36 C1DH77 PS1800-40 C1DH78 PS1800-48 C1DH80 PS1800-56 C1DH81 PS1800-64
C1DH82 PS1800-68 C1DH83 PS1800-72 C1DH84 PS1800-80 C1DH86 PS1800-88 C1DH87 PS1800-96
1188
Seals
Inch Sizes
Bronze Filled PTFE Piston Seals Style 1850

Material: Bronze filled PTFE Seal. Rubber Energizer. Temperature Range: -40F to +220F Pressure Range: 0 to 5000 PSI Note: Piston diameter "F" dimensions are given for pistons without wear. Interchangeable with the PS1800 style piston seal.
Bronze Filled PTFE Piston Seals Style 1850

Catalog Part No. C1KM93 Model Number PS1850-48 Bore Dia. A (in) +0.002 -0.000 3.000 6.000 Seal Height B Seal Cross Groove Width Groove Dia. E Piston Dia. F (in) Section C (in) D (in) 0.002 (in) 0.002 (in) 0.269-0.274 0.362-0.367 0.087-0.093 0.137-0.147 0.284 0.379 2.440 5.238 2.999 +0/-0.006 5.999 +0/-0.007 Wt. 0.14 0.19 Price Each
C1KM94 PS1850-96
Fluid Conveying
Polyurethane Piston Seals Style 2700

Molded from high grade poly-esters, 5% glass fiber and 5% PTFE. Interchangeable with PS1800 seals. Low friction. High resistance to abrasion & extrusion. The polyurethane material has a high degree of memory and will stretch over a piston and snap into the groove and be ready for immediate assembly. Damage during assembly is virtually eliminated. Piston diameter F dimensions are given for pistons without wear rings. Material: Glass/PTFE filled polyurethane seal. Rubber energizer. Temperature Range: -40F to 220F. Pressure Range: 0 to 5,000 PSI.
Polyurethane Piston Seals Style 2700

Catalog Part No. Model Number Bore Dia. A (in) 0.002 2.000 3.500 4.000 4.500 5.000 6.000 7.000 Seal Height B Seal Cross Groove Width Groove Dia. E Piston Dia. F (in) Section C (in) D (in) 0.002 (in) 0.004 (in) 0.116-0.121 0.269-0.274 0.269-0.274 0.269-0.274 0.269-0.274 0.362-0.367 0.362-0.367 0.067-0.073 0.087-0.093 0.087-0.093 0.087-0.093 0.087-0.093 0.137-0.147 0.137-0.147 0.129 0.284 0.284 0.284 0.284 0.379 0.379 1.690 2.940 3.440 3.940 4.440 5.238 6.238 1.999 +0/-0.009 3.499 +0/-0.014 3.999 +0/-0.014 4.499 +0/-0.014 4.999 +0/-0.014 5.999 +0/-0.014 6.999 +0/-0.014 Wt. 0.20 Price Each
C1DH92 PS2700-32 C1DH96 PS2700-56 C1DH98 PS2700-64 C1DJ11 C1DJ12 C1DJ15 PS2700-72 PS2700-80 PS2700-96
0.02 0.02 0.02 0.25 0.08 0.20
C1DH89 PS2700-112
1189
Seals
Inch Sizes
Double-Acting Piston Seals Style PSC

This seal is a double-acting piston seal designed to replace o-rings, quad-rings and T-seals with the same groove dimensions (o-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the PSC to accommodate wider groove widths. The PSC is made of 95A durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure. Material: 95A polyurethane seal, 70A nitrile energizer. Temperature Range: -65F to 220F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.
Double-Acting Piston Seals Style PSC

Catalog Part No. C1KM95 C1KM96 Model Number PSC-218 PSC-218-WB Bore Dia. (in) 1.500 +0.002/-0 1.500 +0.002/-0 2.000 +0.002/-0 2.000 +0.002/-0 2.500 +0.002/-0 3.000 +0.002/-0 3.000 +0.004/-0 3.500 +0.004/-0 4.000 +0.004/-0 4.000 +0.004/-0 5.000 +0.004/-0 6.000 +0.004/-0 Seal Height (in) 0.150 0.265 0.255 0.370 0.255 0.255 0.370 0.255 0.255 0.370 0.255 0.500 Groove Width (in) 0.185 +0.005/-0 0.304 +0.005/-0 0.280 +0.005/-0 0.423 +0.005/-0 0.280 +0.005/-0 0.280 +0.005/-0 0.423 +0.005/-0 0.280 +0.005/-0 0.280 +0.005/-0 0.424 +0.005/-0 0.280 +0.005/-0 0.574 +0.006/-0 Groove Dia. (in) 1.254 +0/-0.002 1.254 +0/-0.002 1.625 +0/-0.002 1.625 +0/-0.002 2.125 +0/-0.002 2.624 +0/-0.004 2.624 +0/-0.004 3.125 +0/-0.004 3.625 +0/-0.004 3.625 +0/-0.004 4.626 +0/-0.004 5.521 +0/-0.004 Piston Dia. (in) 1.498 +0/-0.002 1.498 +0/-0.002 1.998 +0/-0.002 1.998 +0/-0.002 2.498 +0/-0.002 2.997 +0/-0.004 2.997 +0/-0.004 3.498 +0/-0.004 3.998 +0/-0.004 3.998 +0/-0.004 4.999 +0/-0.004 5.999 +0/-0.004 Wt. 0.01 0.01 0.01 0.01 0.02 0.03 0.03 0.02 0.02 0.02 0.06 0.08 Price Each
C1GG32 PSC-326 C1GG33 PSC-326-WB C1GG34 PSC-330 C1KM97 PSC-334 C1GG35 PSC-334-WB C1GG36 PSC-338 C1GG37 PSC-342 C1KM98 C1KM99 PSC-342-WB PSC-350
Fluid Conveying
C1GG38 PSC-433-WB
1190
Seals
Inch Sizes
Bronze Filled Piston Seals Style PSQ

These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible. Material: 40% bronze filled PTFE seal, rubber energizer and quattro ring. Temperature Range: -40F to 220F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.
Bronze Filled Piston Seals Style PSQ

Catalog Part No. Model Number Bore Dia. (in) 2.500 +0.004/-0 3.000 +0.004/-0 3.500 +0.004/-0 4.000 +0.004/-0 5.000 +0.004/-0 Seal Height (in) 0.271 0.271 0.271 0.271 0.271 Groove Width (in) 0.288/0.293 0.288/0.293 0.288/0.293 0.288/0.293 0.288/0.293 Groove Dia. (in) 1.884 2.384 2.884 3.384 4.384 Piston Dia. (in) 2.499 2.999 3.499 3.999 4.999 Wt. 0.04 0.05 0.05 0.07 0.09 Price Each C1GM40 PSQ-40 C1GN12 PSQ-48 C1GN14 PSQ-56 C1GN15 PSQ-64 C1KN11 PSQ-80
1191
Seals
Inch Sizes O-Rings
70 Durometer Buna-N O-Rings

Material: 70 Durometer Buna-N. Temperature Range: -40F . to 240F. 70 Durometer Buna-N O-Rings
Catalog Part No. Model Number Dash Size -003 -006 -007 -008 -009 -010 -011 -012 -013 -014 -015 -016 -017 -018 -019 -020 -021 -022 -023 -024 -025 -026 -027 -028 -029 -030 -031 -032 -033 -034 -035 -036 -037 -038 -039 -040 -041 -042 -043 -044 -045 -048 -049 Nominal Nominal Nominal I.D. O.D. Width 1/16 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/4 3-1/2 3-3/4 4 4-3/4 5 3/16 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-3/8 3-5/8 3-7/8 4-1/8 4-7/8 5-1/8 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 1/16 Actual I.D. 0.056 0.114 0.145 0.176 0.208 0.239 0.301 0.364 0.426 0.489 0.551 0.614 0.676 0.739 0.801 0.864 0.926 0.989 1.051 1.114 1.176 1.239 1.301 1.364 1.489 1.614 1.739 1.864 1.989 2.114 2.239 2.364 2.489 2.614 2.739 2.864 2.989 3.239 3.489 3.739 3.989 4.739 4.989 Actual O.D. 0.176 0.254 0.285 0.316 0.348 0.379 0.441 0.504 0.566 0.629 0.691 0.754 0.816 0.879 0.941 1.004 1.066 1.129 1.191 1.254 1.316 1.379 1.441 1.504 1.629 1.754 1.879 2.004 2.129 2.254 2.379 2.504 2.629 2.754 2.879 3.004 3.129 3.379 3.629 3.879 4.129 4.879 5.129 Actual Width 0.06 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 Pkg. Qty. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 4 4 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
C1CC95 A-003 C1CC98 A-006 C1CC99 A-007 C1CD11 A-008 C1CD12 A-009 C1CD13 C1CD15 C1CD16 C1CD17 C1CD19 C1CD20 C1CD21 C1CD22 C1CD24 C1CD25 C1CD27 C1CD29 A-010 A-012 A-013 A-014 A-015 A-016 A-017 A-018 A-020 A-021 A-023 A-024 C1CD14 A-011
Fluid Conveying
C1CD23 A-019
C1CD26 A-022
C1CD30 A-025 C1CD31 A-026 C1CD32 A-027 C1CD33 A-028 C1CD35 A-029 C1CD36 A-030 C1CD37 A-031 C1CD38 A-032 C1CD39 A-033 C1CD40 A-034 C1CD41 A-035
C1CD42 A-036 C1CD43 A-037 C1CD44 A-038 C1CD45 A-039 C1CD46 A-040 C1CD47 A-041 C1CD48 A-042 C1CD49 A-043 C1CD50 A-044 C1CD51 A-045 C1CD54 A-048 C1CD55 A-049
1192
Seals
Inch Sizes O-Rings
Catalog Part No. Model Number Dash Size -107 -108 -110 -111 -112 -113 -114 -115 -116 -117 -118 -119 -120 -121 -122 -123 -124 -125 -126 -127 -128 -129 -130 -131 -132 -133 -134 -135 -136 -137 -138 -139 -140 -141 -142 -143 -144 -145 -146 -147 -148 -149 -150 -151 -152 -153 -154 -155 -156 Nominal Nominal Nominal I.D. O.D. Width 7/32 1/4 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 2-1/16 2-1/8 2-3/16 2-1/4 2-5/16 2-3/8 2-7/16 2-1/2 2-9/16 2-5/8 2-11/16 2-3/4 2-13/16 2-7/8 3 3-1/4 3-1/2 3-3/4 4 4-1/4 13/32 7/16 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 2-1/16 2-1/8 2-3/16 2-1/4 2-5/16 2-3/8 2-7/16 2-1/2 2-9/16 2-5/8 2-11/16 2-3/4 2-13/16 2-7/8 2-15/16 3 3-1/16 3-3/16 3-7/16 3-11/16 3-15/16 4-3/16 4-7/16 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 Actual I.D. 0.206 0.237 0.362 0.424 0.487 0.549 0.612 0.674 0.737 0.799 0.862 0.924 0.987 1.049 1.112 1.174 1.237 1.299 1.362 1.424 1.487 1.549 1.612 1.674 1.737 1.799 1.862 1.925 1.987 2.050 2.112 2.175 2.237 2.300 2.362 2.425 2.487 2.550 2.612 2.675 2.737 2.800 2.862 2.987 3.237 3.487 3.737 3.987 4.237 Actual O.D. 0.412 0.443 0.568 0.630 0.693 0.755 0.818 0.880 0.943 1.005 1.068 1.130 1.193 1.255 1.318 1.380 1.443 1.505 1.568 1.630 1.693 1.755 1.818 1.880 1.943 2.005 2.068 2.131 2.193 2.256 2.318 2.381 2.443 2.506 2.568 2.631 2.693 2.756 2.818 2.881 2.943 3.006 3.068 3.193 3.443 3.693 3.943 4.193 4.443 Actual Width 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 Pkg. Qty. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
C1CD62 A-107 C1CD63 A-108 C1CD65 C1CD66 C1CD67 C1CD68 C1CD69 C1CD70 C1CD71 C1CD73 C1CD74 C1CD76 A-110-ORING A-111 A-112 A-113 A-114 A-115 A-116 A-118 A-119 A-120
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
C1CD72 A-117
C1CD77 A-121 C1CD78 A-122 C1CD79 A-123 C1CD80 A-124 C1CD81 C1CD82 A-125 A-126
Fluid Conveying
C1CD83 A-127 C1CD84 A-128 C1CD85 A-129-ORING C1CD87 A-130 C1CD88 A-131-ORING C1CD89 A-132-ORING C1CD90 A-133 C1CD91 A-134 C1CD92 A-135 C1CD93 A-136 C1CD94 A-137 C1CD95 A-138 C1CD96 A-139 C1CD97 A-140 C1CD98 A-141-ORING C1CD99 A-142 C1CE11 A-143 C1CE12 A-144 C1CE13 A-145 C1CE14 A-146 C1CE15 A-147 C1CE16 A-148 C1CE17 A-149 C1CE18 A-150 C1CE19 A-151 C1CE20 A-152 C1CE21 A-153 C1CE22 A-154 C1CE23 A-155 C1CE24 A-156
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
1193
Seals
Inch Sizes O-Rings

Catalog Part No. Model Number Dash Size -157 -158 -159 -160 -161 -163 -164 -169 -170 -172 -202 -203 -204 -205 -206 -207 -208 -209 -210 -211 -212 -213 -214 -215 -216 -217 -218 -219 -220 -221 -222 -223 -224 -225 -226 -227 -228 -229 -230 -231 -232 -233 -234 -234 -235 -236 -237 -237 -238 Nominal Nominal Nominal I.D. O.D. Width 4-1/2 4-3/4 5 5-1/4 5-1/2 6 6-1/4 7-1/2 7-3/4 8-1/4 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3 3-1/8 3-1/4 3-3/8 3-3/8 3-1/2 4-11/16 4-15/16 5-3/16 5-7/16 5-11/16 6-3/16 6-7/16 7-11/16 7-15/16 8-7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-1/4 3-3/8 3-1/2 3-5/8 3-5/8 3-3/4 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 3/32 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 Actual I.D. 4.487 4.737 4.987 5.237 5.487 5.987 6.237 7.487 7.737 8.237 0.234 0.296 0.359 0.421 0.484 0.546 0.609 0.671 0.734 0.796 0.859 0.921 0.984 1.046 1.109 1.171 1.234 1.296 1.359 1.421 1.484 1.609 1.734 1.859 1.984 2.109 2.234 2.359 2.484 2.609 2.734 2.859 2.984 2.984 3.109 3.234 3.359 3.359 3.484 Actual O.D. 4.693 4.943 5.193 5.443 5.693 6.193 6.443 7.693 7.943 8.443 0.512 0.574 0.637 0.699 0.762 0.824 0.887 0.949 1.012 1.074 1.137 1.199 1.262 1.324 1.387 1.449 1.512 1.574 1.637 1.699 1.762 1.887 2.012 2.137 2.262 2.387 2.512 2.637 2.762 2.887 3.012 3.137 3.262 3.262 3.387 3.512 3.637 3.637 3.762 Actual Width 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.103 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 Pkg. Qty. 4 4 4 4 4 2 2 2 2 2 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
C1CE25 A-157 C1CE27 A-158 C1CE28 A-159 C1CE29 A-160 C1CE30 A-161 C1CE32 A-163 C1CE33 A-164
C1CE38 A-169 C1CE39 A-170 C1CE41 A-172 C1CE49 A-202 C1CE50 A-203 C1CE51 A-204 C1CE52 A-205 C1CE53 A-206 C1CE54 A-207 C1CE55 A-208 C1CE56 A-209 C1CE58 A-210-ORING A-211 A-212 A-213 A-214 A-216 A-218 A-219 A-220 A-221 A-222 A-223 A-224 A-225 A-226 A-227 A-228 A-230 A-231 A-232
Fluid Conveying
C1CE59 C1CE60 C1CE61 C1CE62 C1CE65 C1CE67
C1CE64 A-215 C1CE66 A-217
C1CE68 C1CE70 C1CE71 C1CE72 C1CE74 C1CE75 C1CE76 C1CE78 C1CE79 C1CE80
C1CE81 A-229 C1CE82 C1CE83 C1CE84
C1CE86 A-233 C1CE87 A-234 C1KL23 C1CE88 C1CE89 C1CE90 C1KL24 A-234-VITON A-235 A-236 A-237 A-237-VITON
C1CE91 A-238-ORING
1194
Seals
Inch Sizes O-Rings
Catalog Part No. C1CE93 C1CE96 C1CE97 C1CE98 C1CF11 C1CF12 Model Number A-240-ORING A-242-ORING A-243 A-244 A-246 A-247 Dash Size -239 -240 -241 -242 -243 -244 -245 -246 -247 -248 -249 -250 -251 -252 -253 -254 -255 -256 -257 -258 -259 -260 -261 -262 -263 -264 -265 -266 -267 -268 -269 -274 -275 -276 -277 -278 -282 -311 -312 -313 -314 -316 -318 -319 -320 -321 -322 -324 -325 Nominal Nominal Nominal I.D. O.D. Width 3-5/8 3-3/4 3-7/8 4 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 6-1/4 6-1/2 6-3/4 7 7-1/4 7-1/2 7-3/4 8 8-1/4 8-1/2 8-3/4 10 10-1/2 11 11-1/2 12 16 9/16 5/8 11/16 3/4 7/8 1 1-1/16 1-1/8 1-3/16 1-1/4 1-3/8 1-1/2 3-7/8 4 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 6-1/8 6-1/4 6-1/2 6-3/4 7 7-1/4 7-1/2 7-3/4 8 8-1/4 8-1/2 8-3/4 9 10-1/4 10-3/4 11-1/4 11-3/4 12-1/4 16-1/4 15/16 1 1-1/16 1-1/8 1-1/4 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-3/4 1-7/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 Actual I.D. 3.609 3.734 3.859 3.984 4.109 4.234 4.359 4.484 4.609 4.734 4.859 4.984 5.109 5.234 5.359 5.484 5.609 5.734 5.859 5.984 6.234 6.484 6.734 6.984 7.234 7.484 7.734 7.984 8.234 8.484 8.734 9.984 10.484 10.984 11.484 11.984 15.955 0.537 0.600 0.662 0.725 0.850 0.975 1.037 1.100 1.162 1.225 1.350 1.475 Actual O.D. 3.887 4.012 4.137 4.262 4.387 4.512 4.637 4.762 4.887 5.012 5.137 5.262 5.387 5.512 5.637 5.762 5.887 6.012 6.137 6.262 6.512 6.762 7.012 7.262 7.512 7.762 8.012 8.262 8.512 8.762 9.012 10.262 10.762 11.262 11.762 12.262 16.233 0.957 1.020 1.082 1.145 1.270 1.395 1.457 1.520 1.582 1.645 1.770 1.895 Actual Width 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.139 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 Pkg. Qty. 10 10 10 10 10 10 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 50 50 50 50 50 20 50 20 20 20 20 20 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
C1CE92 A-239-ORING C1CE95 A-241-ORING
C1CE99 A-245
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
C1CF13 A-248 C1CF14 A-249 C1CF15 A-250 C1CF16 A-251 C1CF17 A-252 C1CF18 A-253 C1CF19 A-254 C1CF20 A-255 C1CF21 A-256 C1CF22 A-257 C1CF23 A-258-ORING C1CF24 A-259 C1CF25 A-260 C1CF26 A-261 C1CF27 A-262 C1CF28 A-263 C1CF29 A-264 C1CF30 A-265 C1CF31 A-266 C1CF32 A-267 C1CF33 A-268 C1CF34 A-269 C1CF39 A-274 C1CF40 A-275 C1CF41 A-276 C1CF42 A-277 C1CF43 A-278 C1CF47 A-282 C1CF52 A-311 C1CF53 A-312 C1CF54 A-313 C1CF55 A-314 C1CF57 A-316 C1CF59 A-318 C1CF60 A-319 C1CF61 A-320 C1CF62 A-321 C1CF63 A-322 C1CF65 A-324 C1CF66 A-325
Fluid Conveying
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
1195
Seals
Inch Sizes O-Rings

Catalog Part No. C1CF67 Model Number A-326 Dash Size -326 -327 -328 -329 -330 -331 -332 -333 -334 -335 -336 -337 -338 -339 -340 -341 -342 -343 -344 -345 -346 -347 -348 -349 -350 -351 -352 -353 -354 -355 -356 -357 -358 -359 -360 -362 -363 -364 -366 -367 -369 -372 -378 -425 -426 -427 -428 -429 -432 Nominal Nominal Nominal I.D. O.D. Width 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6-1/4 6-1/2 6-3/4 7-1/4 7-1/2 8 8-3/4 10-1/2 4-1/2 4-5/8 4-3/4 4-7/8 5 5-3/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 4 4-1/8 4-1/4 4-3/8 4-1/2 4-5/8 4-3/4 4-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-5/8 5-3/4 5-7/8 6 6-1/8 6-1/4 6-5/8 6-7/8 7-1/8 7-5/8 7-7/8 8-3/8 9-1/8 10-7/8 5 5-1/8 5-1/4 5-3/8 5-1/2 5-7/8 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 Actual I.D. 1.600 1.725 1.850 1.975 2.100 2.225 2.350 2.475 2.600 2.725 2.850 2.975 3.100 3.225 3.350 3.475 3.600 3.725 3.850 3.975 4.100 4.225 4.350 4.475 4.600 4.725 4.850 4.975 5.100 5.225 5.350 5.475 5.600 5.725 5.850 6.225 6.475 6.725 7.225 7.475 7.975 8.725 10.475 4.475 4.600 4.725 4.850 4.975 5.350 Actual O.D. 2.020 2.145 2.270 2.395 2.520 2.645 2.770 2.895 3.020 3.145 3.270 3.395 3.520 3.645 3.770 3.895 4.020 4.145 4.270 4.395 4.520 4.645 4.770 4.895 5.020 5.145 5.270 5.395 5.520 5.645 5.770 5.895 6.020 6.145 6.270 6.645 6.895 7.145 7.645 7.895 8.395 9.145 10.895 5.025 5.150 5.275 5.400 5.525 5.900 Actual Width 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.275 0.275 0.275 0.275 0.275 0.275 Pkg. Qty. 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 1 4 4 4 4 4 4 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
C1CF68 A-327 C1CF69 A-328 C1CF70 A-329 C1CF71 C1CF74 A-330 A-332 A-334 C1CF73 A-331
C1CF75 A-333 C1CF76 C1CF77 A-335 C1CF78 A-336 C1CF79 A-337 C1CF80 A-338 C1CF81 A-339 C1CF82 A-340 C1CF83 A-341 C1CF84 A-342 C1CF85 A-343 C1CF86 A-344
Fluid Conveying
C1CF87 A-345 C1CF88 A-346 C1CF89 A-347 C1CF90 A-348 C1CF91 A-349 C1CF92 A-350 C1CF93 A-351 C1CF94 A-352
C1CF95 A-353 C1CF96 A-354 C1CF97 A-355 C1CF98 A-356 C1CF99 A-357 C1CG11 A-358 C1CG12 A-359 C1CG13 A-360 C1CG15 A-362 C1CG16 A-363 C1CG17 A-364 C1CG19 A-366 C1CG20 A-367 C1CG22 A-369 C1CG25 A-372 C1CG31 A-378 C1CG49 A-425 C1CG50 A-426 C1CG51 A-427 C1CG52 A-428 C1CG53 A-429 C1CG56 A-432
1196
Seals
Inch Sizes O-Rings
Catalog Part No. C1CG57 Model Number A-433 Dash Size -433 -434 -435 -436 -437 -438 -439 -440 -441 -443 -446 -448 -450 Nominal Nominal Nominal I.D. O.D. Width 5-1/2 5-5/8 5-3/4 5-7/8 6 6-1/4 6-1/2 6-3/4 7 7-1/2 8-1/2 9-1/2 10-1/2 6 6-1/8 6-1/4 6-3/8 6-1/2 6-3/4 7 7-1/4 7-1/2 8 9 10 11 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Actual I.D. 5.475 5.600 5.725 5.850 5.975 6.225 6.475 6.725 6.975 7.475 8.475 9.475 10.475 Actual O.D. 6.025 6.150 6.275 6.400 6.525 6.775 7.025 7.275 7.525 8.025 9.025 10.025 11.025 Actual Width 0.275 0.275 0.275 0.275 0.275 0.275 0.275 0.275 0.275 0.275 0.275 0.275 0.275 Pkg. Qty. 4 4 4 4 2 2 2 2 2 2 2 2 1 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
C1CG58 A-434 C1CG59 A-435 C1CG60 A-436 C1CG61 A-437 C1CG62 A-438 C1CG63 A-439 C1CG64 A-440 C1CG65 A-441 C1CG67 A-443 C1CG70 A-446 C1CG72 A-448 C1ET94 568-450
0.01 0.01 0.01 0.01 0.01 0.01
Viton (Fluorocarbon) O-Rings

Material: Viton (Fluorocarbon). Temperature Range: -20F to 400F. Viton (Fluorocarbon) O-Rings
Catalog Part No. Model Number Dash Size -012 Nominal Nominal Nominal I.D. O.D. Width 3/8 1/2 1/16 Actual I.D. 0.364 Actual O.D. 0.504 Actual Width 0.07 Pkg. Qty. 20 Wt. 0.01 Price Each
Fluid Conveying
C1ZT53 A-012-BROWN-VITO

Material: 90 Durometer Buna-N. Temperature Range: -40F . to 240F. 90 Durometer Buna-N O-Rings
Catalog Part No. C1FA96 Model Number A-012-90D Dash Size -012 -014 -210 -212 -214 -219 -222 -225 Nominal Nominal Nominal I.D. O.D. Width 3/8 1/2 3/4 7/8 1 1-5/16 1-1/2 1-7/8 1/2 5/8 1 1-1/8 1-1/4 1-9/16 1-3/4 2-1/8 1/16 1/16 1/8 1/8 1/8 1/8 1/8 1/8 Actual I.D. 0.364 0.489 0.734 0.859 0.984 1.296 1.484 1.859 Actual O.D. 0.504 0.629 1.012 1.137 1.262 1.574 1.762 2.137 Actual Width 0.070 0.070 0.139 0.139 0.139 0.139 0.139 0.139 Pkg. Qty. 34 34 25 25 23 19 19 2 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.05 Price Each
C1CD18 A-014-90D C1CE57 A-210-90D C1FF85 A-212-90D C1CE63 A-214-90D C1CE69 A-219-90D C1CE73 A-222-90D C1CE77 A-225-90D
1197
Seals
Inch Sizes Back-Up Rings
Back-Up Rings
Features: Urethane Models: Molded of 90A durometer urethane, these back-up rings provide excellent extrusion resistance. Stretched for installation, they return quickly to their original size for easy installation. Teflon Models: Available in Solid (T suffix), Split (ST suffix) and Spiral Cut (TS suffix). Temperature Range: Urethane Models: -65F to 220F. Teflon Models: -40F to 500F. Note: Sizes correspond to O-Ring sizes. Price shown is for each individual back-up ring, not for package.
90A Durometer Urethane Back-Up Rings

Catalog Model Dash Part No. Number Size C1BT73 575-011 C1BT74 575-012 C1BT76 575-014 C1BT77 575-015 C1BT78 575-016 C1BT79 575-017 C1BT80 575-018 C1BT82 575-020 C1BT83 575-021 C1BT84 575-022 C1BT91 575-029 C1BT92 575-030 C1KK48 575-038 C1BT98 575-110 C1BT99 575-111 C1BU11 575-112 C1BU12 575-113 C1BU13 575-114 C1BU14 575-115 -011 -012 -014 -015 -016 -017 -018 -020 -021 -022 -029 -030 -038 -110 -111 -112 -113 -114 -115 -116 -117 -118 -120 -121 -122 -124 -125 -126 -127 -128 -129 Type Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Pkg. Qty 10 10 10 10 10 10 10 10 10 10 10 10 10 9 9 9 9 9 9 9 9 9 8 8 8 8 8 8 8 8 8 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each

Catalog Model Dash Part No. Number Size C1BU31 575-132 C1BU32 575-133 C1BU33 575-134 C1BU34 575-135 C1BU36 575-137 C1BU37 575-139 C1KK49 575-140 C1BU38 575-141 C1BU42 575-145 C1BU43 575-149 C1BU44 575-151 C1BU47 575-154 C1BU48 575-155 C1BU49 575-157 C1BU54 575-208 C1BU55 575-209 C1BU56 575-210 C1BU57 575-211 C1BU58 575-212 C1BU59 575-213 C1BU60 C1BU62 C1BU64 575-214 575-216 575-218 C1BU61 575-215 C1BU63 575-217 C1BU65 575-219 C1BU66 575-220 C1BU67 575-221 C1BU68 575-222 C1BU69 575-223 C1BU70 575-224 -132 -133 -134 -135 -137 -139 -140 -141 -145 -149 -151 -154 -155 -157 -208 -209 -210 -211 -212 -213 -214 -215 -216 -217 -218 -219 -220 -221 -222 -223 -224 Type Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Pkg. Qty 8 8 8 8 8 8 10 7 6 6 6 3 3 3 10 9 9 9 9 9 9 9 9 9 9 9 10 10 10 8 8 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
Fluid Conveying
C1BU15 575-116 C1BU16 575-117 C1BU17 575-118 C1BU19 575-120 C1BU20 575-121 C1BU21 575-122 C1BU23 575-124 C1BU24 575-125 C1BU25 575-126 C1BU26 575-127 C1BU27 575-128 C1BU28 575-129
1198
Seals
Inch Sizes Back-Up Rings
Catalog Model Dash Part No. Number Size C1BU71 575-225 C1BU72 575-226 C1BU73 575-227 C1BU74 C1BU76 C1BU78 C1BU81 575-228 575-230 575-232 575-234 C1BU75 575-229 C1BU77 575-231 C1BU79 575-233 C1BU82 575-235 C1BU83 575-236 C1BU84 575-237 C1BU85 575-238 C1BU86 575-239 C1BU87 575-240 C1BU88 575-241 C1BU89 575-242 C1BU90 575-243 C1BU91 575-244 C1BU92 575-245 C1BU93 575-246 C1BU94 575-247 C1BU95 575-248 C1BU96 575-249 C1BU97 575-250 C1BU99 575-252 C1BV11 575-253 C1BV12 575-254 C1BV13 575-255 C1BV14 575-256 C1BV16 575-258 C1BV17 575-259 C1BV18 575-260 C1BV19 575-261 C1BV20 575-262 C1BV25 575-314 C1BV27 575-316 C1BV32 575-321 C1BV33 575-324 C1BV34 575-325 C1BV35 575-326 C1BV36 575-327 C1BV37 575-328 C1BV38 575-329 C1BV39 575-330 C1BV40 575-331 C1BV41 575-332 C1BV42 575-333 -225 -226 -227 -228 -229 -230 -231 -232 -233 -234 -235 -236 -237 -238 -239 -240 -241 -242 -243 -244 -245 -246 -247 -248 -249 -250 -252 -253 -254 -255 -256 -258 -259 -260 -261 -262 -314 -316 -321 -324 -325 -326 -327 -328 -329 -330 -331 -332 -333 Type Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Pkg. Qty 10 10 10 10 10 7 7 7 7 6 6 6 5 5 5 5 5 5 5 4 4 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 8 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each

Catalog Model Dash Part No. Number Size C1BV43 575-334 -334 -335 -336 -337 -338 -339 -340 -341 -342 -344 -345 -346 -347 -348 -350 -354 -358 -425 -427 -429 -432 -433 -436 -439 C1BV44 575-335 C1BV45 575-336 C1BV46 575-337 C1BV47 575-338 C1BV48 575-339 C1BV49 575-340 C1BV50 575-341 C1BV51 575-342 C1BV53 575-344 C1BV54 575-345 C1BV55 575-346 C1BV56 575-347 C1BV57 575-348 C1BV59 575-350 C1BV62 575-354 C1BV64 575-358 C1BV67 575-425 C1BV68 575-427 C1BV69 575-429 C1BV71 575-432 C1BV72 575-433 C1BV74 575-436 C1BV77 575-439 Type Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Urethane Pkg. Qty 7 7 7 7 7 6 6 6 5 4 4 4 4 4 3 3 2 3 3 3 2 2 2 2 Wt. 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Price Each
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
Fluid Conveying
0.01 0.01 0.01 0.01 0.01
0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01
1199
Seals
Inch Sizes
Spiral External Retainer Rings
Spiral External Retainer Rings

Catalog Part No. Model Number Free I.D. A (in) 1.798 4.755 Thickness B (in) 0.031 0.111 Radial Wall C (in) 0.118 0.250 Shaft Dia. D (in) 1.875 5.000 Groove Dia. E (in) 1.818 4.790 Groove Width F (in) 0.039 0.120 Wt. 0.10 0.25 Price Each
C1DR61 VS-187 C1DT58 WST-500
Seal Aligning Bearings
Fluid Conveying
Seal Aligning Bearings Miscellaneous Products

Catalog Part No. Model Number A (in) 2 B (in) 3.187 W (in) 1.750 C (in) 1.500 D (in) 2.266 Wt. 2.02 Price Each
C1GG21 HH200ES
1200
Seals
Metric Sizes
Metric Urethane Rod U-Seals
Material: Urethane. Temperature Range: -65F to 220F. Pressure Range: 0 to 5000 PSI. Metric Urethane Rod U-Seals
Catalog Part No.
C1ZT15
Model Number
MRTU-32X40X6
I.D. O.D. H (mm) (mm) (mm)

32.0 40.0 6.0
Wt.
0.01
Price Each
1201
Seals
Assortment Kits & Tools

Catalog Part No. C1BT64 Price Each
Model Number 568-KIT
Description Kit contains 436 Buna-N 70 Durometer O-Rings in 36 different sizes.
Wt. 0.90
Kit Contains: 005-011 (25), 012 (15), 013-018 (10), 110 (15), 111-116 (10), 117-121 (7), 210-211 (10), 212-219 (7)
O-Ring Kit (Buna-N)
Catalog Part No.
Model Number
Description Kit contains 436 Viton (Fluorocarbon) 75 Durometer O-Rings in 36 different sizes.
Wt. 1.03
Price Each
C1ZT80 568-FC-KIT
Kit Contains: 005-011 (25), 012 (15), 013-018 (10), 110 (15), 111-116 (10), 117-121 (7), 210-211 (10), 212-219 (7)
Fluid Conveying
O-Ring Kit (Viton)

Model Number
Wt. 0.61
C1CA71 900-BOSS-KIT
Kit Contains: 904 (35), 905-906 (30), 907-910 (20), 911-914 (15), 916 (15)
Straight Thread O-Ring Kit
Catalog Part No.
Model Number
Description Kit contains 226 Buna-N Quad Seals in 36 different sizes.
Wt. 0.68
Price Each
C1DJ32 QUAD-KIT
Kit Contains: 4005-4012 (10), 4013-4016 (6), 4017-4018 (5), 4110-4116 (6), 4117-4121 (4), 4210-4219 (5)
Quad Ring Kit
1202
Seals
Catalog Part No. C1BT62 Price Each
Model Number 568-FACE-KIT
Wt. 0.75
Kit Contains: 011 (25), 012 (25), 014 (25), 016 (25), 018 (20), 021 (15), 025 (10), 029 (10)
O-Ring Face Seal Kit Pneumatic Power & Control

Catalog Part No. C1BT63 Model Number 568-FLANGE-KIT Description Kit contains 70 Buna-N 90 Durometer O-Rings in 7 different sizes. Wt. 0.75 Price Each
Kit Contains: 210 (10), 214 (10), 219 (10), 222 (10), 225 (10), 228 (10), 232 (10)
Flange O-Ring Kit
Catalog Part No.
Model Number
Description Kit contains the 9 most popular sized D-Rings used on Caterpillar equipment.
Wt. 1.87
Price Each
Fluid Conveying
C1EW63 CTC-4C4784
Caterpillar D-Ring Kit
Catalog Part No.
Model Number
Description Kit contains 380 Buna-N 70 Durometer Metric O-Rings in 36 of the most popular Japanese metric sizes.
Wt. 0.90
Price Each
C1DE79 METRIC-O-KIT-J
Metric O-Ring Kit Common Japanese Sizes
Kit Contains Following, I.D. mm x Cross Section mm (Qty): 2.8 x 1.9 (25), 3.8 x 1.9 (20), 4.8 x 1.9 (20), 5.8 x 1.9 (20), 6.8 x 1.9 (15), 7.8 x 1.9 (15), 8.8 x 1.9 (15), 9.8 x 1.9 (15), 9.8 x 2.4 (15), 10.8 x 2.4 (15), 11.0 x 2.4 (15), 11.8 x 2.4 (12), 12.8 x 2.4 (12), 13.8 x 2.4 (12), 14.8 x 2.4 (12), 15.8 x 2.4 (12), 17.8 x 2.4 (8), 19.8 x 2.4 (8), 20.8 x 2.4 (8), 21.8 x 2.4 (8), 24.4 x 3.1 (6), 29.4 x 3.1 (7), 21.7 x 3.5 (5), 22.1 x 3.5 (5), 23.7 x 3.5 (7), 24.7 x 3.5 (7), 25.2 x 3.5 (7), 25.7 x 3.5 (7), 27.7 x 3.5 (7), 28.7 x 3.5 (6), 29.2 x 3.5 (6), 29.7 x 3.5 (6), 30.7 x 3.5 (6), 31.2 x 3.5 (6), 14.5 x 4.0 (4), 23.5 x 4.0 (6)
1203
Seals

Model Number
Description Kit contains 500 Buna-N 70 Durometer Metric O-Rings in 36 of the most popular European metric sizes.
Wt. 0.67
C1DE78 METRIC-O-KIT-E
Metric O-Ring Kit Common European Sizes
Kit Contains Following, I.D. mm x Cross Section mm (Qty): 5.0 x 1.5 (20), 13.0 x 1.5 (15), 16.0 x 1.5 (10), 2.2 x 1.6 (20), 3.1 x 1.6 (20), 4.1 x 1.6 (20), 7.1 x 1.6 (20), 9.1 x 1.6 (15), 10.1 x 1.6 (15), 13.1 x 1.6 (15), 4.0 x 2.0 (20), 8.0 x 2.0 (15), 9.0 x 2.0 (15), 10.0 x 2.0 (15), 12.0 x 2.0 (15), 14.0 x 2.0 (10), 16.0 x 2.0 (10), 19.0 x 2.0 (10), 20.0 x 2.0 (10), 4.3 x 2.4 (15), 5.3 x 2.4 (15), 5.6 x 2.4 (15), 6.0 x 2.4 (20), 7.6 x 2.4 (15), 8.3 x 2.4 (15), 8.6 x 2.4 (15), 10.0 x 2.5 (10), 13.0 x 2.5 (10), 14.0 x 2.5 (10), 15.0 x 2.5 (10), 17.0 x 2.5 (10), 18.0 x 2.5 (10), 19.0 x 2.5 (10), 10.0 x 3.0 (10), 11.0 x 3.0 (10), 9.0 x 3.0 (10)
Catalog Part No.
Model Number
Description Kit contains stock of Buna-N 70 Durometer O-Ring Cord, Razor Blade, Splicing Tool and Tube of Adhesive.
Wt. 1.04
Price Each
C1BT65 568-SPLICE-KIT
Fluid Conveying
O-Ring Splice Kit Inch Sizes
Catalog Part No.
Model Number
Description Kit can produce O-Rings of any standard inch size cross section plus a wide variety of metric sizes. Kit contains 14 lengths of Buna-N 70 Durometer O-Ring Cord, Razor Blade, Cutting & Splicing Tool and Tube of Adhesive.
Wt.
Price Each
C1DE77 MET/INCH-SPLICE-
1.16
Kit Contains: Inch Cross Sections: 1/16, 3/32, 1/8, 3/16, 1/4. Metric Cross Sections (mm): 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 5.7, 8.4
O-Ring Splice Kit Metric & Inch Sizes
Catalog Part No.
Model Number
Description Kit contains 475 Urethane Back-Up Rings in 24 of the most popular sizes.
Wt. 1.83
Price Each
C1BV86 575-KIT
Kit Contains: 111-116 (25), 210-216 (25), 217-224 (15), 325-327 (10)
Urethane Back-Up Ring Kit
1204
Seals
Model Number
Description Kit contains 325 Urethane Back-Up Rings in 36 of the most popular sizes. Rings are scarf cut to facilitate installation.
Wt. 0.66
C1ET95 575-PTFE-KIT-S
Kit Contains: 005-012 (15), 013-018 (10), 110-116 (10), 117-121 (5), 210-219 (5)
Teflon Back-Up Ring Kit
1205
Seals
Cylinder Kits & Parts
Heil Cylinder Repair Kits

Heil Cylinder Repair Kits
Catalog Part No. Model Number Description For Heil Models 1-4868, 1-4902, 1-4903, 1-6126. 4" Bore x 2" Rod. Contains Insert Wiper, Vee Set Rod Seal, Piston Seal. Wt. 0.25 Price Each
C1GL92 HL-K272-3582
Hyco 70,000 Series Single Acting Telescopic Cylinder Parts
Fluid Conveying
Packing: Normally uses urethane u-seals, but may be retrofitted with vee packing. All sizes are 1/4 inch cross section. Wipers: Urethane snap-in type. Bearings: Nylon bearings. Outer bearing is flat on the top & bottom. Inner bearing is trapped between two retainers. The bottom side of the inner bearing is step-cut on the OD to pilot over snap ring. Cross section is 0.245 inches. Piston: Welded to stage. Uses 2 replaceable wear rings per stage. Stage OD's: 3, 4, 5, 6, 7, 8-1/8, 9-3/8. Special Info: Spring steel type snap ring serves as internal stop. Uses a spiral retainer to trap lower bearing. Identification: Cylinder model number & serial number stamped on cylinder body near base. Note: 70,000 Series single action cylinders are manufactured using urethane u-seals but may be retrofitted with a vee packing set if desired. Three types of packing kits are offered. Type 1 kits are identical to the original Hyco packing sets and utilize Parker u-seals. Type 2 kits are also identical to the original Hyco packing sets but contain a lower cost Hallite manufactured u-seal. Type 3 kits contain a vee packing set retrofit for the original u-seal packing. The vee packing can be more effective in sealing an older cylinder with abrasive scoring or other surface blemishes. Important: When ordering Hyco telescopic parts, please provide the model number & serial number. Hyco 70,000 Series Single Acting Telescopic Cylinder Parts
Catalog Part No. Model Number Manual Bleeder Valve Description Wt. 0.02 Price Each
C1CY90 HY-A2688
1206
Seals
Cylinder Kits & Parts
Peabody Galion Telescopic Cylinder Parts
Packing: Vee packing. No top adaptor. 0.275 inch cross section. Wipers: Urethane. Wiper does not snap into a groove but is trapped between the head nut and top bearing. Bearings: Castiloid (cast iron) outer bearing, grooved to serve as top adaptor for packing. Single action cylinders have inner bearing trapped between 2 spiral retainer rings. Double action cylinders see below. Piston: Single action cylinder has 2 half-moon shaped castiloid bearings that fit into a groove at piston end of stage. Stage OD's: 1.970, 2.970, 3.970, 4.970, 5.970, 6.970, 7.970, 9.125. Special Info: Stage diameters all 0.030 inch under nominal inch except 9.125. All stage bores 0.020 inch over nominal half inch. Identification: Model number stamped into steadrest area near gland collar on body. Double Action Cylinders: Same as above except: Bearings - Has no inner bearing. Instead there is a steel spacer ring trapped between the two spiral retainers. Piston - Double action cylinder has bronze piston and threads onto stage. 2 or 3 butt-cut piston rings per stage in separate grooves. Peabody Galion Telescopic Cylinder Parts
Catalog Part No. Model Number Description Vee Set & Wiper for 3.970 inch Stage OD Wt. 0.18 Price Each
C1DH22 PG-4VSW
1207
Control Cables
Felsted High Performance Control Cables

Felsted cables, controls and control systems are used to control such items as PTO's, manual and automatic transmissions, hydraulic valves, clutches, throttles or accelerators, engine shut-offs, and brakes. Our locations equipped to manufacture cables from stock components are Miami Springs, West Palm Beach, Fort Lauderdale, Belle Glade and Atlanta. Core Construction: Hi-Performance (HP) 1 x 7 coated core is available in 3, 4 and 6 series cables. HP Core utilizes a proprietary coating over 1 x 7 wire rope which offers improved flexibility and higher push loads than armor core construction. Solid stainless steel cores are available in 3 Series Push-Pull, Universal and PTO cables. Liners: All cables utilize polymer liners which have a temperature rating of -65F to 225F. Factory lubrication provides optimum core performance without requiring further service. Stranded Conduit: Multiple, oil tempered spring wires are placed in a long lay pattern to protect the liner and inner core, maintain flexibility and withstand extreme compressive and tensile loads. This long lay construction results in minimal deflections during cable operation, assuring precise controlling action to the operator. Conduit Jacket: Heavy duty, thick-walled polymer jackets are extruded onto the stranded liner for maximum cable strength. Standard material is HDPE molded to a dark maroon color. End Fittings: Corrosion resistant materials are used throughout to provide maximum life. Standard 3, 4 and 6 series rods and sleeves are 300 series stainless steel, while hubs are either aluminum or stainless. Seals & Boots: Durable custom compounded seals are used to prevent moisture and contaminants from entering the cable. Rod & Sleeve Bearing: An exclusive polymer rod and sleeve bearing is used to improve efficiency, sealing and cable life by preventing metal to metal contact between the rod and sleeve. They also accurately align the rod with the seal to insure superior sealing and a long cable life.
Push-Pull Cables - 3 Series Push Loads To 80 lbs Pull Loads To 120 lbs
Cores: Choice of either solid stainless core or HP core. (HP core offers improved flexibility and higher push loads). Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware: page 1221
1208
Control Cables
Catalog Part No. N/A N/A N/A N/A Felsted Model MTO-1INCH MTO-2INCH MTO-3INCH MTO-4INCH O.A. Travel Length (in) (in) 1 2 3 4 MTO MTO MTO MTO Core MTO MTO MTO MTO Hubs MTO MTO MTO MTO Push Rating (lbs) Pull Rating (lbs) A (in) B (in) C (in) D (in) Wt. Price Each
80(HP) 120(HP) 3.00 4.44 2.31 3.75 60(Solid) 60(Solid) 80(HP) 120(HP) 4.00 5.94 3.31 5.25 50(Solid) 60(Solid) 70(HP) 120(HP) 40(Solid) 60(Solid) 5.00 7.44 4.31 6.75 60(HP) 120(HP) 30(Solid) 60(Solid) 6.00 8.94 5.31 8.25
MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material and Hub configuration.
Fluid Conveying
Core: HP Core. Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 5 Inches. Hardware: page 1221 Push-Pull Cables - 4 Series Push Loads To 150 lbs Pull Loads To 230 lbs
Catalog Part No. N/A N/A N/A N/A N/A Felsted Model MTO-1INCH MTO-2INCH MTO-3INCH MTO-4INCH MTO-5INCH O.A. Travel Length (in) (in) 1 2 3 4 5 MTO MTO MTO MTO MTO Hubs MTO MTO MTO MTO MTO Push Pull Rating Rating (lbs) (lbs) A (in) B (in) C (in) D (in) 150 150 125 100 75 230 230 230 230 230 3.13 4.13 5.13 6.13 4.69 6.19 7.69 9.19 2.50 3.50 4.50 5.50 4.06 5.56 7.06 8.56 Wt. Price Each
7.13 10.69 6.50 10.06
MTO Models: Made-To-Order in specified Travel, O.A. Length and Hub configuration.
1209
Control Cables
Core: HP Core. Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked are Bulkhead (aluminum), Clamp (aluminum) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 7 Inches. Hardware: page 1221 Push-Pull Cables - 6 Series Push Loads To 250 lbs Pull Loads To 400 lbs
O.A. Travel Length (in) (in) 1 2 3 4 MTO MTO MTO MTO Push Pull Rating Rating A (lbs) (lbs) (in) 250 250 210 170 400 400 400 400
Fluid Conveying
Catalog Part No. N/A N/A N/A N/A MTO-1INCH MTO-2INCH MTO-3INCH MTO-4INCH
Felsted Model
Hubs MTO MTO MTO MTO
B (in)
C (in)
D (in)
Wt.
Price Each
1.00 3.25 5.00 2.56 4.25 6.50 3.56 5.81 5.25 8.00 4.56 7.31 6.25 9.50 5.56 8.81
1210
Control Cables
Core: Armor Core. Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked are Bulkhead (aluminum) and Clamp (aluminum). Minimum Bend Radius: 10 Inches. Hardware: page 1221 Push-Pull Cables - 8 Series Push Loads To 700 lbs Pull Loads To 1000 lbs
O.A. Travel Length (in) (in) 1 2 3 4 MTO MTO MTO MTO Push Pull C Rating Rating A (lbs) (lbs) (in) B (in) (in) 700 700 600 500 1000 1000 1000 1000
Fluid Conveying
Catalog Part No. N/A N/A N/A N/A MTO-1INCH MTO-2INCH MTO-3INCH MTO-4INCH
Felsted Model
Hubs MTO MTO MTO MTO
D (in)
Wt.
Price Each
3.69 5.56 3.19 5.06 4.69 7.06 4.19 6.56 5.69 8.56 5.19 8.06 6.69 10.06 6.19 9.56
1211
Control Cables
Universal Cables - 3 Series Light Duty
Core: Choice of either solid stainless core or HP core. (Stainless core offers increased durability, since the core is exposed. HP core offers improved flexibility). Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub or Plain other end. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware & Knobs: page 1221 Universal Cables - 3 Series Light Duty
Catalog Part No. N/A MTO-3INCH Felsted Model O.A. Travel Length (in) (in) 3 MTO Core MTO Hub MTO AA (in) BB (in) Wt. Price Each
4.50 5.00
MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material and Plain End or Hub choice.
1212
Control Cables
Universal Cables - 3 Series Heavy Duty Push Loads To 60 lbs Pull Loads To 60 lbs
Fluid Conveying
Core: Choice of either solid stainless core or HP core. (HP core offers improved flexibility and higher push loads). Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub other end. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware & Knobs: page 1221 Universal Cables - 3 Series Heavy Duty Push Loads To 60 lbs Pull Loads To 60 lbs
Catalog Part No. N/A Felsted Model MTO-3INCH O.A. Travel Length (in) (in) 3 MTO Core MTO Hub MTO Push Rating (lbs) Pull Rating (lbs) AA (in) A (in) B (in) C (in) D (in) Wt. Price Each
50(HP) 60(HP) 4.50 5.00 8.94 4.31 8.25 40(Solid) 60(Solid)
MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material and Hub choice.
1213
Control Cables
Universal Cables - 4 Series Push Loads To 120 lbs Pull Loads To 120 lbs
Core: HP Core. Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub other end. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 5 Inches. Hardware & Knobs: page 1221 Universal Cables - 4 Series Push Loads To 120 lbs Pull Loads To 120 lbs
Catalog Part No. N/A Felsted Model MTO-3INCH O.A. Travel Length (in) (in) 3 MTO Core HP Hub MTO Push Pull Rating Rating AA (lbs) (lbs) (in) 100 120 A (in) B (in) C (in) D (in) Wt. Price Each
5.19 5.13 9.19 4.50 8.56
MTO Models: Made-To-Order in specified Travel, O.A. Length and Hub choice.
1214
Control Cables
Universal Cables - 6 Series Push Loads To 225 lbs Pull Loads To 225 lbs
Fluid Conveying
Core: HP Core. Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub other end. Specified Hub styles stocked are Bulkhead (aluminum), Clamp (aluminum) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 7 Inches. Hardware & Knobs: page 1221 Universal Cables - 6 Series Push Loads To 225 lbs Pull Loads To 225 lbs
Catalog Part No. Felsted Model MTO-3INCH O.A. Travel Length (in) (in) 3 MTO Core HP Hub MTO Push Pull Rating Rating AA (lbs) (lbs) (in) 200 225 A (in) B (in) C (in) D (in) Wt. Price Each
N/A
5.19 5.25 9.50 4.56 8.81
MTO Models: Made-To-Order in specified Travel, O.A. Length and Hub choice.
1215
Control Cables
Quick Disconnect Cables - 3 Series Light Duty Push Loads To 20 lbs Pull Loads To 20 lbs
Cores: Choice of either solid stainless core or HP core. (Stainless core offers increased durability, since the core is exposed. HP core offers improved flexibility). Head: Each cable assembly has either a Vernier (aluminum) or Positive Lock Head (aluminum). Vernier Head is ideal for any application requiring coarse or fine adjustment. Positive Lock Head features a T handle that locks the setting when rotated 90. Hub: Each cable assembly has either a Specified Hub or a Plain end. Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware: page 1221 Quick Disconnect Cables - 3 Series Light Duty Push Loads To 20 lbs Pull Loads To 20 lbs
Catalog Part No. N/A Felsted Model MTO-3INCH O.A. Travel Length (in) (in) 3 MTO Head MTO Core MTO Hub MTO Push Rating (lbs) Pull Rating (lbs) Wt. Price Each
20(HP) 20(HP) 20(Solid) 20(Solid)
MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material, Head, and Plain End or Hub choice.
1216
Control Cables
Quick Disconnect Cables - 3 Series Heavy Duty Push Loads To 20 lbs Pull Loads To 20 lbs
Fluid Conveying
Core: Choice of either solid stainless core or HP core. (HP core offers improved flexibility and higher push loads). Head: Each cable assembly has either a Vernier (aluminum) or Positive Lock Head (aluminum). Vernier Head is ideal for any application requiring coarse or fine adjustment. Positive Lock Head features a T handle that locks the setting when rotated 90. Hub: Each cable assembly has a Specified Hub. Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware: page 1221 Quick Disconnect Cables - 3 Series Heavy Duty Push Loads To 20 lbs Pull Loads To 20 lbs
Catalog Part No. N/A Felsted Model MTO-3INCH O.A. Travel Length (in) (in) 3 MTO Head MTO Hub MTO Push Rating (lbs) Pull Rating (lbs) A (in) B (in) C (in) D (in) Wt. Price Each
20(HP) 20(HP) 5.00 8.94 4.31 8.25 20(Solid) 20(Solid)
MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material, Head and Hub choice.
1217
Control Cables
Quick Disconnect Cables - 4 Series Push Loads To 20 lbs Pull Loads To 20 lbs
Core: HP Core. Head: Each cable assembly has either a Vernier (aluminum) or Positive Lock Head (aluminum). Vernier Head is ideal for any application requiring coarse or fine adjustment. Positive Lock Head features a T handle that locks the setting when rotated 90. Hub: Each cable assembly has a Specified Hub. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown. Minimum Bend Radius: 5 Inches. Hardware: page 1221 Quick Disconnect Cables - 4 Series Push Loads To 20 lbs Pull Loads To 20 lbs
Catalog Part No. N/A Felsted Model MTO-3INCH O.A. Travel Length (in) (in) 3 MTO Head MTO Hub MTO Push Pull Rating Rating A (lbs) (lbs) (in) 20 20 B (in) C (in) D (in) Wt. Price Each
5.13 9.19 4.50 8.56
MTO Models: Made-To-Order in specified Travel, O.A. Length, Head and Hub choice.
1218
Control Cables
Power Take Off (PTO) Cables Push Loads To 50 lbs Pull Loads To 50 lbs
Core: Solid stainless steel core. Minimum Bend Radius: 6 Inches. Hardware: page 1221 Power Take Off (PTO) Cables Push Loads To 50 lbs Pull Loads To 50 lbs
Catalog Part No. C1EL17 000-35000-0120 Felsted Model O.A. Travel Length (in) (in) 5 120 Wt. 1.75 Price Each
Fluid Conveying
Note: For O.A. Length shorter than 120 inches: (1) Remove core. (2) Cut conduit to length and deburr. (3) Install core. (4) Cut core to length and deburr. Note: For O.A. Length longer than 120 inches, consider using a Universal Cable - 3 Series Light Duty, with a Plain end, and with a 30162 Red PTO Knob.
1219
Control Cables
Remote Valve Operation (RVO) Cables Push Loads To 100 lbs Pull Loads To 230 lbs
Core: HP Core. Hub: Each cable assembly has a Valve Operator Hub which connects to a Felsted Remote Valve Control (Models 55700, 55709, 55786-1), and a Specified Hub. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Universal (aluminum). The Universal style hub is used with a Felsted Valve Connection Kit. Minimum Bend Radius: 5 Inches. Hardware: page 1221 Remote Valve Operation (RVO) Cables Push Loads To 100 lbs Pull Loads To 230 lbs
Catalog Part No. N/A MTO-4INCH Felsted Model O.A. Travel Length (in) (in) 4 MTO Hub MTO Push Rating (lbs) 100 Pull Rating (lbs) 230 Wt. Price Each
MTO Models: Made-To-Order in specified O.A. Length and Hub choice.
1220
Control Cables
Cable Hardware & Knobs
Fluid Conveying

Catalog Part No. Felsted Model Description Ball Joint, 3 Series Ball Joint, 4 Series Ball Joint, 4 Series Ball Joint, 6 Series Clamp, 3 Series Clamp, 4 Series Clevis, 3 Series Clevis, 3 Series Clevis, 4 Series Clevis, 4 Series Clevis, 6 Series Clevis, 6 Series Clevis, 6 Series Conduit Clip Field Clamp Knob, PTO, Red Knob, Plain, Red Knob, Plain, Black Knob, Plain, Black Pivot, 3 Series Pivot, 3 Series Pivot, 3 Series Pivot, 4 Series Pivot, 4 Series A B B A A 1/4-20 UNC-2B 1/4-20 UNC-2B 1/4-20 UNC-2B 5/16-24 UNF-2B 10-32 UNF-2B 7/64 7/64 1/4-28 UNF-2B 1/4-28 UNF-2B 1/4 1/4 1/4 1/4 3/8 13/64 19/64 5/32 5/16 15/32 21/64 5/16 5/16 1/2 1/2 5/8 11/16 9/16 32/32 1-3/16 B Type A A A A A 10-24 UNF-2B 1/4-28 UNF-2B 1/4-28 UNF-2B 3/8 1/2 10-32 UNF-2B 10-32 UNF-2B 1/4-28 UNF-2B 1/4-28 UNF-2B 5/16-24 UNF-2B 5/16-24 UNF-2B 5/16-24 UNF-2B B 15/32 15/32 15/32 1 1 3/16 1/4 1/4 5/16 1/4 5/16 3/8 C 9/16 9/16 7/8 13/64 7/32 7/32 9/32 9/32 11/32 9/32 11/32 7/16 D 1/4-28 UNF-2A 1/4-28 UNF-2A E 31/32 31/32 Wt. 0.08 0.08 0.10 0.15 0.01 0.02 0.01 0.08 0.09 0.12 0.07 0.12 0.03 0.12 0.20 0.15 0.02 0.10 0.05 0.02 0.02 0.02 0.03 0.05 Price Each C1EU91 39006
C1ES22 000-49006-0000 C1EZ29 000-49007-0000 C1FE36 000-69007-0000 C1EU33 39001 C1EZ80 49001 C1EW99 000-39003-0001 C1EX89 000-49003-0002 C1ER99 000-49003-0001 C1EV29 000-69003-0003 C1EW46 000-49003-0003 C1EZ98 000-69003-0001 C1EZ95 000-89003-0002 C1EW45 000-39064-0001 C1ET99 39030-1 C1EU72 30162 C1KE82 49005-2011 C1ZV18 49005-1011 C1HR28 69005-1012 C1EV94 000-39042-0000 C1ZT92 39011-2 C1EN33 39011-1 C1EV97 000-49008-0001 C1EV95 000-49042-0000
5/16-24 UNF-2A 31/32 1/2 1/2 1 1-1/4 1-1/4 1-7/16 1-1/4 1-7/16 1-5/8 1-1/2 1-1/2 1-9/16 2 2 2-1/4 2 2-1/4 2-1/2
5/16-24 UNF-2B 17/32 11/16 5/16-24 UNF-2A 1-1/8
1221
Control Cables
Catalog Part No. Felsted Model Description Shim, 3 & 4 Series Stop Collar, 3 Series Terminal Eye, 4 Series Terminal Eye, 4 Series Hub, 4 Series, RVO Sleeve, RVO Kit Switch/Pin Set Hub, RVO Control, Single Friction B Rod Bearing, 8 Series Sleeve, 5" Travel A Type A 13/64 7/64 1/4-28 UNF-2B 1/4-28 UNF-2B B 1 5/16 1/4 5/16 C 1/2 5/16 5/8 5/8 3/8 3/8 1-7/8 1-7/8 D 3/32 E 1-1/2 Wt. 0.05 0.01 0.11 0.10 0.06 0.03 0.02 Price Each
C1EU76 39002 C1EW27 30103 C1EW98 000-49004-0003 C1EX90 000-49004-0001 C1KK27 40203-10 C1KK26 40202 C1KG94 C1KG83 C1KH73 000-59112-0000 000-50036-0001 055887-000000
0.15 0.17 4.80 0.01 0.20
C1KK29 40313-1 C1KK85 80016 C1KK19 40004-5
1222
Thread Sealants
SAF-T-LOK TPS Anaerobic Sealant

Features: White paste in squeeze tube. Seals and locks threaded joints on metal piping systems. Instant seal. Lubricates threads for alignment. Prevents vibration loosening. Resists most industrial chemicals and gasses. Cure Time: Cures totally in 24 hours. Cure can be accelerated with SAF-T-LOK primer. Operating Temperature Range: -100F to 350F. Note: Not for use on plastic pipe. SAF-T-LOK TPS Anaerobic Sealant
Catalog Part No. C1DM42 TPS-50 C1DM41 TPS-250 Price Each
SAF-T-LOK Model
Size 50 cc 250 cc
Wt. 0.16 0.61
Staybond S592 Anaerobic Sealant

Fluid Conveying Features: White paste in squeeze tube. Instantly seals threaded fittings. Lubricates threads. Prevents galling. Prevents vibration loosening. Resists oils and solvents. Cure Time: Cures totally in 24 hours. Cure can be accelerated with Staybond primer. Operating Temperature Range: -65F to 350F. Note: Not for use on plastic pipe. Staybond S592 Anaerobic Sealant
Catalog Part No. C1DK64 C1DK63 S592-50 S592-250 Staybond Model Size 50 ml 250 ml Wt. 0.15 0.90 Price Each
1223
Thread Sealants
SAF-T-LOK HS Anaerobic Hydraulic Sealant

Features: Brown, low strength, liquid in bottle. Seals hydraulic fittings and locks fine threads. Instant seal. Lubricates threads. Prevents vibration loosening. Shear Strength: 1500-2500 PSI. Cure Time: Cures totally in 24 hours. Cure can be accelerated with SAF-T-LOK primer or heat (200F for 10 to 20 minutes). Operating Temperature Range: Note: Not for use on plastic pipe. SAF-T-LOK HS Anaerobic Hydraulic Sealant
Catalog Part No. C1CY68 HS-50 SAF-T-LOK Model Size 50 cc Wt. 0.15 Price Each
Staybond S569 Anaerobic Hydraulic Sealant

Features: Brown, low strength, medium viscosity liquid in bottle. Seals hydraulic fittings and locks mechanical fasteners. Strong resistance to most industrial chemicals. Prevents corrosion between parts. Cure Time: Fixture tight in minutes. Full cure in 24 hours at 72F. Staybond S569 Anaerobic Hydraulic Sealant
Catalog Part No. C1EX13 S569-50 Staybond Model Size 50 ml Wt. 0.17 Price Each
1224
Thread Sealants
Teflon Tapes
Standard Teflon Tape: Instantly seals threaded fittings. Lubricates threads. Prevents galling. Resists oils and solvents. Pink Plumbers Tape: Superior, high density tape that is not stretched during manufacturing like ordinary Teflon tape. Unasco Gold Tape: A high density thread sealing tape for critical areas. For use on all metal pipe threaded joints where acids, alkalis, oils or solvents are present. Uses include sealing pipe threads on lines for natural gas, LP Gas, butane and propane. Tape is de-greased and can be used on oxygen lines. -450F to 500F temperature range. Copper Anti-Seize Tape: Made from copper filled Teflon. For general purpose anti-seize applications on most types of metal fasteners. Protects against corrosion, seizure, galling & carbon fusion, rust, galvanic pitting. -450F to 2200F temperature range. Nickel Anti-Seize Tape: Made from nickel filled Teflon. For anti-seize applications on stainless steel and aluminum. Protects against corrosion, seizure, galling & carbon fusion, rust, galvanic pitting. -450F to 2400F temperature range. Oxygen Tape: Free of any residual petroleum fraction and is safe to use on oxygen systems. -450F to 500F temperature range. Teflon Tapes
Catalog Part No. Model Number Description Standard Teflon Tape (blue roll/white tape) Pink Plumbers Tape (orange roll/pink tape) Unasco Gold Tape (gold roll/yellow tape) Copper Anti-Seize Tape (brown roll/brown tape) Nickel Anti-Seize Tape (silver roll/silver tape) Oxygen Tape (green roll/green tape) Size (in) 1/2 x 520 1/2 x 260 1/2 x 540 1/2 x 600 1/2 x 260 1/2 x 260 Wt. 0.03 0.04 0.01 0.10 0.05 0.04 Price Each
Fluid Conveying
C1DM23 TEFLONTAPE C1EU45 APP104 C1EU48 ATG005 C1EU47 ATC001 C1EU49 ATS001
C1EU46 AT0001
1225
Staybond T242 Removable Thread Lock

Features: Blue liquid in squeeze bottle. Medium strength thread locking & sealing. MIL-S-46163 Type II Grade N. Cure Time: Parts will be fixture tight in minutes. Full cure in 24 hours at 72 F. Staybond T242 Removable Thread Lock
Catalog Part No. Staybond Model Size 50 ml (1.69 fl.oz.) Wt. 0.17 Price Each
C1EX18 T242-50
SAF-T-LOK T70 Permanent Thread Lock

Features: Red liquid in squeeze bottle. Very high strength thread locking & sealing. Locks nuts and screws. Gap filling 0.002 - 0.008 inches. Shear strength 3000-4000 PSI. MIL-S-46163 Type I Grade K. ASTM D 5363 AN9221. Cure Time: Parts will be fixture tight within one hour. Full cure in 24 hours at 75 F. SAF-T-LOK T70 Permanent Thread Lock
Catalog Part No. SAF-T-LOK Model C1ZX39 T70-50 Size 50cc (1.7 fl.oz.) Wt. 0.15 Price Each
Staybond T262 Permanent Bolt Lock

Features: Red liquid in squeeze bottle. High strength thread locking & sealing. MIL-S-46163 Type II Grade O. Cure Time: Parts will be fixture tight in minutes. Full cure in 24 hours at 72 F. Staybond T262 Permanent Bolt Lock
Catalog Part No. C1EX19 Staybond Model T262-50 Size 50 ml (1.69 fl.oz.) Wt. 0.17 Price Each
1226
Allied Witan Filter Vents

With their low profile, these compact units are most often used as breather vent filters, easily inserted in cylinders, gear boxes, crank cases, storage tanks and other vessels wherever pressure equalization is required. Sintered metal filter. Allied Witan Filter Vents
Catalog Part No. C1CP48 C1CP52 C1CP54 Allied Witan Model F28 F38 F48 Thread 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT Length (in) 0.44 0.64 0.76 0.89 Hex (in) 0.44 0.56 0.69 0.88 Wt. 0.01 0.03 0.04 0.07 Price Each
C1CP37 F18
Model F
Denso Petrolatum Tape

Description: Densyl Tape is composed of a non-woven synthetic fabric carrier, fully impregnated with a neutral compound based on saturated petrolatum and inert siliceous fillers. Uses: Densyl Tapes are designed to withstand extreme temperature variations. The tapes provide long term corrosion protection to pipes, flanges, valves and related surfaces. Features: Applied to marginally prepared surfaces Conforms to irregular shapes and profiles Can be applied to cold, wet surfaces Not effected by water, acid, salts or soil organics Encapsulation of lead paint Contains no solvents Meets AWWA C217 Standard Can be applied above and below ground. Properties: Thickness (ASTM D1000) 46 mils. Maximum Service Temperature 158F. Denso Petrolatum Tape
Catalog Part No. Denso Model Description Roll of All Purpose Petrolatum Tape, 2 inches wide x 33 feet long Wt. 2.01 Price Each
Fluid Conveying
C1GM81 DENSYL-TAPE-2IN
1227
Boeshield T-9 Corrosion Shield & Waterproof Lubricant

Features: Penetrates deeply into fasteners and fixtures Displaces moisture Dries to a clean waxy film Lubricates and protects all metals for months Will not harm paints, plastics, rubber or vinyl Attacks existing corrosion T-9 will also loosen rusted parts Contains No Fluorocarbons Many Industrial and Household uses Boeshield T-9 Corrosion Shield & Waterproof Lubricant
Catalog Boeshield Part No. Model C1JD92 T9 Description Boeshield T-9 Corrosion Shield, 12 oz Spray Can Wt. 1.00 Price Each
Anti-Seizing Products
Applications: Nuts, Bolts & Screws Pipe Fittings Boom Guides Valve Assemblies Pump Mountings Chain Drives Shafts Gaskets Press Fit Assemblies Taps & Drills Metal Fittings Machinery Anti-Seizing Products
Catalog Part No. Mfg Model Description Bostik Never-Seez Regular Grade Anti-Seize, 8 oz, Brush Top Wt. 0.64 Price Each
Fluid Conveying
C1FG17 NSBT-8
1228
SCRUBS in-a-Bucket Hand Cleaner Towels

SCRUBS in-a-Bucket are the pre-moistened, heavy duty hand cleaner towels that go where you go! SCRUBS in-a-Bucket easily removes soil from your hands and leaves them clean and conditioned anywhere you are working. Powerful, yet safe, patented citrus-based formula works together with an absorbent, non-scratching abrasive hand cleaner towel for proven performance. Benefits: Portable and convenient One-step cleaning process Conditions and softens hands Will not transfer soils back onto hands Works fast to loosen, dissolve and absorb dirt, grease and grime Tough, durable bucket that is light and portable. Quickly Removes: Adhesives Caulk Dirt Epoxy Grease Ink & Dye Lubricants Oils Paint Sealant Tar Urethane Wax Asphalt Polyurethane Grime SCRUBS in-a-Bucket Hand Cleaner Towels
Catalog Part No. C1EV89 ITW Dymon Model 422.72 Description Small Bucket of 30 Hand Towels Large Bucket of 72 Hand Towels Bracket to Surface Mount a Bucket of Hand Towels Wt. 1.19 2.65 0.66 Price Each
C1EK16 422.30
C1ZT17 MISC-422-WMN
Fluid Conveying
Cast Bronze Y-Strainers

Miscellaneous Products Conbracos 59 Series Y strainers are lightweight and compact. All sizes offer maximum protection against foreign particles in piping systems and process equipment. Cast bronze body and stainless steel screens are completely corrosion resistant. Self-aligning screen is easily accessed for cleaning or service. Operating pressures up to 400 psig make the 59 Series an excellent choice as a versatile, multipurpose strainer. Sizes 1/8" to 1/2" are perfect for OEM applications and are available as UL recognized components for use as a secondary strainer on oil burning equipment. Optional tapped caps are also available for convenient cleaning of the screen and are not plugged. Working Pressure (Non-Shock): 300 psig @ 350F Steam. 400 psig @ 150F Water, Oil, Gas. Self-Aligning Screens: 304 SS (Standard) available in a large variety of meshes (thru 100). Cast Bronze Y-Strainers Indexes & Technical Information
Catalog Part No. Conbraco Model C1EN59 59-001-01 Size Description Wt. 0.44 Price Each
Standard 304SS 50 mesh screen, 1/4 NPT 1.38 in screen area
1229
Precision Splined Hubs

Features: Made from low alloy, high carbon steel. Close tolerance O.D. and I.D. concentricity permits accurate mounting of sheave or sprocket. Precision also permits accurate chucking for additional mounting.
Precision Splined Hubs

Catalog Part No. Hub City Model Type 9 Tooth SAE A 13 Tooth SAE B 14 Tooth SAE C 13 Tooth SAE D Spline Details 16/32 DP 30 PA 16/32 DP 30 PA 12/24 DP 30 PA 8/16 DP 30 PA Spline O.D. (in) 0.625 0.875 1.250 1.750 Coupling O.D. (in) 1.251 / 1.250 1.501 / 1.500 2.251 / 2.250 3.001 / 3.000 Coupling Length (in) 1.250 1.50 2.00 2.25 Wt. 0.34 0.52 1.75 3.00 Price Each
C1EX23 03-32-00032 C1AD60 03-32-00033 C1AD61 03-32-00034 C1AD63 03-32-00074
Tire Service Products
Fluid Conveying
Tire Service Products

Catalog Part No. Dill Model Description Tire Inflator Chuck. For direct connection to live air only. Features a built-in shutoff valve. Solid brass. 1/4 NPT female thread. 300 PSI maximum. Gooseneck Style high pressure coupling with 70 angle. 5000 PSI working pressure. 10,000 PSI proof pressure. 1/8 NPT female thread. Tank Valve (Schraeder Valve) for charging pressure tanks or compressed air chambers. Complete with valve core and cap. 1/8 NPT male thread. Wt. 0.10 0.14 0.03 Price Each
C1EU50 D104 C1DK87 SK-2043-C C1DK86 SK-20420
Service Station & Tank Truck Equipment
Service Station & Tank Truck Equipment

Catalog Part No. Dixon Model Description Utility Nozzle. 3/4" inlet, 3/4" spout size. 1 x 3/4 reducer bushing furnished. Die cast metal body. For use with 12 volt pumps and gravity flow. Applications include construction, farm and small utility tanks. Seal Kit for Utility Nozzle.
Wt. 1.65 0.08
Price Each
C1GH70 900S34 C1GH71 900SK
1230
Hose Nozzles
Hose Nozzles
Catalog Part No. Dixon Model Description Thermoplastic Fog Nozzle with bumper. Red polycarbonate with brass stem. 3/4 NPS thread. For use with water only up to 100 PSI. Adjusts from straight stream to fog. 120 Spray, 30.9 GPM @ 100 PSI. Factory Mutual approved. Wt. 0.32 Price Each
C1FC49 FNB75S
Textbooks
Fluid Conveying
Textbooks
Catalog Part No. C1JR30 Book Part No. TC-101-05-E Publisher Vickers Name of Textbook Description Wt. 3.14 Price Each
Color-illustrated hardbound textbook covering a range Industrial of topics related to hydraulics and electrohydraulics, Hydraulics Manual including basic hydraulics principles, electricity and electronics, amplifiers, cartridge valves and circuits.
Gloves
Gloves
Catalog Part No. C1HL32 C1HL33 C1HL31 Model HSCGLV-LG HSCGLV-XL HSCGLV-2X Description Anti-vibration Gloves, Large. Heat resistant Amara synthetic leather with impact & vibration absorbing gel pads. Anti-vibration Gloves, Extra Large. Heat resistant Amara synthetic leather with impact & vibration absorbing gel pads. Anti-vibration Gloves, Double Extra Large. Heat resistant Amara synthetic leather with impact & vibration absorbing gel pads. Wt. 0.29 0.29 0.29 Price Each
1231
Hydraulic Power & Control Gloves
Catalog Part No. C1JE44 C1JE96 C1JD52 C1JE97 4092 8426 1SR8427L 85 Model Description Select split leather palm, leather index finger, leather finger tips, leather thumb and knuckle strap. Wing thumb design with shirred elastic back and striped cotton back with safety cuff. Cotton poly blend string knit, latex palm, knit wrist. Economy string knit with latex palm, knit wrist. 10 pack of disposable latex gloves. Seamless and reversible with rolled cuff. 8 oz. 100% Cotton Jersey Gloves. Clute-cut design with knit wrist. Wt. 0.30 0.20 0.30 0.14 0.10 Price Each
C1JM35 4020
Hand Tools
Fluid Conveying
Hand Tools
Catalog Part No. C1KK63 61CB C1JF33 C1JF35 GS-3D GS-6D Model Channellock 6 in 1 Screwdriver. Channellock Tongue & Groove Plier Set. 6-1/2", 9-1/2", 12" Channellock Plier Set. 7" Cutting Plier, 7-1/2" Long Nose Plier, 10" Tongue & Groove Plier Description Wt. 0.50 2.00 2.19 0.60 Price Each
Channellock 8 inch Retaining Ring Plier. Capacity 1/4" to 2" External, 3/8" to 2" Internal. C1JM99 927-CHANNELLO Includes 0.36 0.47 0.70 Straight Tips, 0.36 0.47 90 Tips. Easy Switch from External to CK Internal.
Pneumatic Piston Vibrators Houston Vibrator BV Series

Features: BV Series Pneumatic Piston Vibrators will dislodge problem materials in bins, hoppers, chutes, pipes, railcars, and trucks. All models are available in Impacting or Air Cushioned (silent) configurations. Low initial cost Precision CNC machined bodies and pistons Complete control over force, frequency, and amplitude by regulation of supply air pressure Virtually maintenance free when installed with an HVI Air Preparation Unit. Available Options: Internal Tefkote for lubrication-free operation and high temperature environments External coatings for corrosive or food-grade areas Internal start springs for horizontal mounting Tapped exhaust for routing exhaust air away from vibrator. Pneumatic Piston Vibrators Houston Vibrator BV Series
Catalog Part No. C1JF16 Houston Vibrator Model BV225IMPTESS Description Pneumatic Piston Vibrator, impacting style, with Tapped Exhaust (TE), Spring Start (SS), capacity 60 cubic foot hopper with 3/16 to 1/4 inch wall Wt. 17.44 Price Each
1232
Cable (Wire) Ties
Cable (Wire) Ties

Catalog Part No. Model Description 3.8 in long, 10 Assorted Colors, 18 lb Tensile Strength, UV Rated, 100 per package 7.5 in long, Black, 50 lb Tensile Strength, UV Rated, Mil STD 3367-1, 100 per package 11.5 in long, Black, 50 lb Tensile Strength, UV Rated, Mil STD 3367-7, 100 per package 14.5 in long, Black, 50 lb Tensile Strength, UV Rated, Mil STD 3367-2, 100 per package 14.75 in long, Black, 120 lb Tensile Strength, UV Rated, Mil STD 3367-3, 100 per package 21.75 in long, Black, 120 lb Tensile Strength, UV Rated, 100 per package 28.8 in long, Black, 120 lb Tensile Strength, UV Rated, Mil STD 3367-6, 100 per package 36.5 in long, Black, 120 lb Tensile Strength, UV Rated, 100 per package Price Wt. (pkg) (per pkg) 0.05 0.25 0.46 0.55 0.85 2.00 2.61 3.84 C1KH66 WT-4A C1KH67 WT-7B C1KH60 C1KH61 C1KH62 WT-11B WT-14B WT-15B
C1KH63 WT-21B C1KH64 WT-28B
Fluid Conveying
C1KH65 WT-36B
1233
Hose Reels
Hannay Spring Rewind Hose Reels

Hannay Spring Rewind Hose Reels are typically used for lubrication, air, water, air tools, washdown and other general industrial applications. Models with 10,000 psi capability can be used in chassis grease applications. Rewind: A heavy-duty spring motor provides self-contained rewind power. A non-sparking ratchet assembly locks the reel when the desired length of hose has been payed out. A pull on the hose unlocks the reel and the spring motor retracts the hose. A declutching arbor is provided to prevent damage from reverse winding. Inlet: N500 Series: 90 swivel joint with 1/4 Inch Female Pipe. N700 Series: 90 swivel joint with 1/2 Inch Female Pipe. Outlet: N500 Series: 1/4 Inch Female Pipe. N700 Series: 1/2 Inch Female Pipe. Rollers: All models are supplied with a 4-way roller assembly. Hose Stop: A hose stop should be used to prevent damage to rollers and nozzles and to permit adjustment of free hose length. Product Temperature Range: -20F to 225F. Hannay Spring Rewind Hose Reels
Catalog Part No. Hannay Model Pressure Hose Hose Hose Rating Capacity Capacity Capacity (psi) 1/4 ID (ft) 3/8 ID (ft) 1/2 ID (ft) 3,000 -50 50 Dimensions (in) A = 10.5 B = 3 C = 8 D = 10 E = 11.25 F = 20.75 G = 20 H = 10.38 J = 10 K = 12 Wt. 80.00 Price Each
C1DF67 N716-19-20J
Parts & Accessories For Hannay Spring Rewind Hose Reels Miscellaneous Products
Catalog Part No. Part Number Description Hose Stop, plastic, 3 inch OD, ID not drilled (Maximum hole size 1-7/8 in) Wt. 0.54 Price Each
C1CY66 HS-3
1234
Pressure Washer Products
High Pressure Hose Assemblies

High Pressure Hose Assemblies Catalog Part No. Pressure Pro Model Hose Pressure I.D. Assembly Rating (in) Length (ft) (psi) Description Black Hose, with Male x Female QD's, Male Pipe x Male Pipe Swivel with Bend Restrictor Wt. Price Each
C1JP83
AHS230
0.38
50
4000
9.50
C1HX29 HOS280
0.38
50
4000
Gray Hose, Male Pipe x Male Pipe Swivel 10.87 with Bend Restrictor
Quick Couplers
Pressure Pro high flow couplers are non-valved for applications where maximum flow is required. Their smooth, open bore offers low pressure drops and is ideal for applications such as high pressure water and steam washers and carpet cleaners.
Quick Couplers Pressure Rating A C Price (psi) (in) (in) Wt. Each Brass Brass Brass Brass 0.17 0.26 0.32 1.50
Fluid Conveying
Catalog Part No. C1BN23
Pressure Pro Coupling Model Size Thread Size 1/4 3/8 1/2 3/4 1/4-18 3/8-18 1/2-14 3/4-14 3STF3-B
Body Material 4000 4000 4000 2000
C1BK22 2STF2-B C1BR48 4STF4-B C1EZ78 STFC6
Socket Half - Female Pipe

Catalog Part No. Pressure Pro Coupling Thread Model Size Size 3/8 3/8-18 Pressure Rating (psi) 4000 Quick Couplers Price Body Material Wt. Each Brass 0.24
C1JR69 3STM3-B
Socket Half - Male Pipe
Catalog Part No.
Pressure Pro Coupling Thread Model Size Size 1/4 3/8 1/2 1/4-18 3/8-18 1/2-14 ST3F3-S
Pressure Rating (psi) 4000 4000 4000
Quick Couplers Price Body Material Wt. Each Plated Steel Plated Steel Plated Steel 0.25 0.25 0.25
Plug Half - Female Pipe
C1DL57 ST2F2-S C1DL58 C1DL59 ST4F4-S
1235
Pressure Washer Products
Quick Couplers Price Body Material Wt. Each Plated Steel 0.08
Catalog Part No.
Pressure Pro Coupling Thread Model Size Size 3/8 3/8-18
Pressure Rating (psi) 4000
C1ER45 ST3M3-S
Plug Half - Male Pipe
CAUTION: Brass models wear out sooner than steel models in high pressure applications. Quick Couplers Price Nozzle Size Wt. Each 3.5 0.04 0.17
Pressure Pro Model 915035Q
Coupling Size 1/4 1/4
Color Yellow
Nozzle Type Chiseling See Note
Fan Angle 15
C1JC99 MSP4PAK
Plug Half - Spray Tips
Red Cutting Nozzles: Concentrated stream that can gouge or cut, can cut stubborn stains from concrete surfaces. Yellow Chiseling Nozzles: Works like a scraper, stripping paint, grease and grime from hard surfaces. Green Flushing Nozzles: Most commonly used nozzle for cleaning dirt from sizing, sidewalks and metal furniture. White Wash Nozzles: Wide spray for washing a large area, usually safe with most surfaces. MSP4PAK: Dixon model. Pack of 4 nozzles. 65 Soap, 15 Yellow, 25 Green, 40 White.
Fluid Conveying
Adapters
Adapters Price Wt. Each 0.12 0.14
Catalog Part No. C1EP43
Pressure Pro Model AL456
Description 22MM Male x 3/8-18 Female Pipe 22MM Male x 3/8-18 Male Pipe
C1EP44 AL457
Guns, Wands & Nozzles

Guns, Wands & Nozzles Price Wt. Each 1.60 1.19
Catalog Part No. C1KE30
Pressure Pro Model 21290C
Description
Gun. 5000 PSI / 10 GPM / 300F maximum. 3/8 Female NPT inlet. 1/4 Female NPT outlet. Wand. 4060 PSI / 10.5 GPM / 302F maximum. 36 inches long with straight end. 1/4 Male NPT both ends. Variable Fan Nozzle. 3000 PSI / 4.49 GPM / 300F maximum. 0.055 inch orifice diameter. 0 to 80 adjustable fan pattern (twist to adjust). Push-Pull for pressure adjustment. 1/4 Female NPT inlet.
C1KG88 DL36ICS C1BM19 3324-1001.4 (Hypro model)
0.28
1236
Winches
RKI (Rawson Koenig) Hydraulic Worm Gear Winches

Maximum Line Pull: The maximum line pull of a winch depends upon which cable layer is being used, as shown in the chart, and must not be exceeded. Worm Brake: Applications that involve holding a suspended load should have a worm brake. Winches with brakes must have the cable wound according to the brake setting. Winches with brakes can be ordered either overwind cable spooled over the drum in the direction of the brake housing or underwind cable spooled under the drum in the direction of the brake housing. Drum Clutch: If you wish to pull rope off the drum by hand, a drum clutch is needed. If such freespooling is not needed, a keyed drum will be more reliable. Duty Cycle: Winches are rated for intermittent duty only. Excessive use will cause high oil temperature resulting in rapid oil deterioration, lower efficiency and increased wear. Mounting: Winches should be mounted with the worm shaft horizontal and below the drum. Other arrangements may not provide adequate lubrication. Worm brakes must be mounted below the oil level or they will fail. Available Options: Extra cable capacity, higher line speed, grooved drum barrel, divided drum, galvanizing and stainless steel shafts for improved corrosion resistance, custom mounting, special shafts and power sources are some of the available options.
Fluid Conveying
RKI (Rawson Koenig) Hydraulic Worm Gear Winches

Catalog Part No. Winch Koenig Model Series Mounting Worm Worm Brake Gear Rotation Ratio Worm Gear Hand Drum With Drum Clutch, 3.50 Barrel Dia, 8.25 Flange Dia, 7.87 Barrel Length Shaft Assy Other Features Wt. Price Each
C1JD33
08HUU-4LASL
08H
Upright
Under Wind
9:1
Left Hand
Std
Left Hand
35.00
1237
Peel Press Drive
Kawasaki / Lantec Peel Press Drive

Package Features: 25+ years gear and bearing life expectancy. Extended warranty offered. Supported by factory authorized distributor, Kawasaki authorized QA Center. Double torque arm included. Gearbox: The Lantec HB341 7.58:1 planetary gearbox design incorporates a floating internal ring gear, which ensures an even distribution of load through the planet gears into the ring gear. A "clash of manufacturing tolerances" is prevented with this floating design. Since the load is evenly distributed, the gears experience even wear, prolonging life. All steel construction. Floating ring gear is heat treated, forged alloy steel. Planet & sun gears are carburized and heat treated steel. All gearing in accordance with A.G.M.A. guidelines. Tapered Timken roller bearings are used in this design. This type of bearing is stronger than "skinny" needle bearings, which are found in competing gearboxes. (Needle bearings are more prone to breakage if mis-aligned). Input shaft and mount will directly accept the Staffa motor. Output shaft is flanged and is ready to bolt down to peel press. Convenient gear lube level indication and fill. Motor : The Kawasaki HMB-150-S Staffa hydraulic motor features hydrostatically balanced con rods for high starting and running torques, and low wear. The motor is simply constructed and is rated at 3600 PSI continuous, 4250 PSI intermittent. A double-lip, double spring shaft seal is in place for efficient low speed sealing. A motor case flushing & cooling circuit is included. Motor is manufactured in an ISO 9002 Certified facility. Life Expectancy Operating Conditions: 28,476 foot pounds torque, 5 RPM, and continuous duty cycle. Gearbox Life Expectancy: Durability (gear pitting life) is calculated at 213,000 operating hours at full load and speed. 213,000 hours divided by 3,500 hours per season = 60+ years gearbox life. Motor Life Expectancy: L10 Bearing Life is calculated at 17,750 hours (front bearing) and 17,580 hours (rear bearing). 17,580 divided by 3,500 hours per season = 5 years motor L10 life. Extended Warranty: We have so much confidence in this package that we offer an extended 3-year warranty from the date of installation. This extended warranty requires a pre-installation inspection of the hydraulic system and system upgrade if required. Please contact us for details on this extended warranty. Kawasaki / Lantec Peel Press Drive
Catalog Part No. C1DG93 HSC Model PEEL-PRESS-UNIT Description Peel Press Drive, complete, including gearbox, motor, motor flange kit and adapters, motor case drain standpipe, motor case flushing & cooling circuit Wt. 2600.00 Price Each
Note: This peel press assembly is NOT kept in stock.
1238
Hydraulic Fluid, Tractor Transmission/Hydraulic Fluid Automatic Transmission Fluid, Gear Lube, Motor Oil
Hydraulic Fluid (Anti-Wear, Wide Temperature Range) Mobil D.T.E. 10M Series
Description: These antiwear oils meet the demanding requirements of hydraulic systems which operate over a wide temperature range. The highly refined base oils used were selected for optimum flow characteristics at subzero temperatures as well as long term stability in demanding systems. A Viscosity Index (VI) improver system with maximum resistance to shearing and viscosity loss maintains system efficiency and minimizes internal pump leakage losses at high operating temperatures. These oils are approved in the Denison HF-O, Vickers V 104C, Vickers 35VQ25, Sunstrand pumps and Rexroth axial piston pumps Application: Primarily recommended for hydraulic applications where low ambient temperatures or rapid changes from low to high temperatures are encountered. Advantages: Suitable for wide temperature range conditions Superior low-temperature flow properties Outstanding keep-clean performance Stay-In-Grade viscosity under high shear conditions Super stabilized antiwear and water tolerance Good demulsibility, filterability and foam resistance Excellent multimetal compatibility and corrosion resistance. Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Material Safety Data Sheets (MSDS) are available upon request. page 1333 Viscosity - Temperature Charts: page 1333
Fluid Conveying
Hydraulic Fluid (Anti-Wear, Wide Temperature Range) Mobil D.T.E. 10M Series
Catalog Part No. C1CN74 Mobil Model DTE-10-EXCEL-3 2 ISO Container Viscosity Size Grade 5 gal 32 Viscosity 32.7cSt@104F 6.63 cSt@212F Viscosity Index 164 Pour Point -65.2F Flash Point 482F Gravity, Specific API Gravity -0.8468 Wt. (lb) 35.27 Price Each
NOTE: Lubricating Oil products are NOT stocked at our Distribution Center, and are only available for local pickup at our branch locations. For these products, a BOLD Catalog Part No. means EVERY branch location stocks it, and a Bulleted Catalog Part No. means CERTAIN branch locations stock it.
1239
Hydraulic Fluid (Anti-Wear, Super-Stabilized) Mobil D.T.E. 20 Series

Description: These oils provide superior antiwear and film strength characteristics for use in severe duty hydraulic systems, and are formulated from stable, high quality, high VI base stocks. The super-stabilized additive system was selected to neutralize the formation of corrosive materials, provide excellent antiwear properties, and multimetal compatibility. This additive system also provides better thin oil film protection against rusting, retention of superior oil cleanliness and improved compatibility with water. These oils are approved in the Denison HFO, Vickers V-104C and 35VQ25, and Sunstrand pump tests. DTE 24, 25 and 26 are qualified against Cincinnati Milicron specifications P-68, P-70 and P-69, respectively. Application: Primarily recommended for most hydraulic applications in industrial, marine and mobile service, including high-pressure systems, systems with servo valves and all robotics. Advantages: Excellent keep-clean performance for systems critical to deposit buildup, such as sophisticated NC control mechanisms Controlled demulsibility allows the oils to work well when contaminated with small amounts of water, and to separate large amounts of water readily Multimetal compatibility under both wet and dry conditions protects pumps using steel and copper alloys Excellent protection against rust Good thin oil film protection for surfaces intermittently wetted by oil Outstanding load-carrying and antiwear properties. Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Material Safety Data Sheets (MSDS) are available upon request. Viscosity - Temperature Charts: page 1332
Hydraulic Fluid (Anti-Wear, Super-Stabilized) Mobil D.T.E. 20 Series

Catalog Part No. C1JB78 C1CN75 Mobil Model DTE-24 DTE-25 ISO Container Viscosity Size Grade 5 gal 5 gal 32 46 Viscosity 165SSU@100F 44SSU@210F 238SSU@100F 49SSU@210F Viscosity Index 95 95 Pour Point -10F -10F Flash Point 395F 395F Gravity, Specific API Gravity 32 31.5 0.867 0.873 Wt. Price Each
1240
Hydraulic Fluid (Anti-Wear, Biodegradable) Mobil EAL 224H

Description: Developed to meet stringent performance requirements, as well as to satisfy needs for a hydraulic oil which is readily biodegradable and virtually nontoxic. Formulated from select, high quality, high VI vegetable oils and additives. Approved in Vickers V-104C and 35VQ25, and various pump tests, and meets the requirements of Denison HF-O and the TP30283A vane pump tests. Application: Primarily recommended for most hydraulic systems operating with oil temperatures in the range of 0F to 180F where readily biodegradable and virtually nontoxic fluids are required. It can be used in industrial, marine and mobile service, including high pressure systems, systems with servo valves and all robotics. It may be used in gear applications requiring either an ISO VG 32 or 46 oil with mild extreme-pressure characteristics. Its high viscosity index satisfies other applications requiring an ISO VG 32 or 46 oil. Advantages: A high-performance, readily biodegradable, virtually nontoxic antiwear hydraulic oil Multimetal compatibility protects pumps made of steel and copper alloys Excellent protection against rust Good thin oil film protection of surfaces intermittently wetted by oil Outstanding load-carrying and antiwear properties. Spillage & Disposal: Depending on contamination and/or degradation levels, small amounts of spilled or leaked Mobil EAL 224H will not adversely affect ground water or the environment. For small spills on the ground, the uncontaminated product will readily biodegrade by naturally occurring soil organisms when exposed to air. Nonetheless, spillage of Mobil EAL 224H should be handled similarly to currently accepted methods for conventional mineral oil spills. Mobil EAL 224H does not contain hazardous substances reportable under CERCLA. Since ALL oil spills are reportable, even a spill of the vegetable-based product must be reported to the National Response Center (the U.S. Coast Guard). Local environmental agencies should also be consulted to clarify local requirements. Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. Material Safety Data Sheets (MSDS) are available upon request. Viscosity - Temperature Charts: page 1333
Fluid Conveying
Hydraulic Fluid (Anti-Wear, Biodegradable) Mobil EAL 224H

Catalog Part No. C1CN87 Mobil Model EAL224H ISO Container Viscosity Size Grade 5 gal 34/46 Viscosity 187SSU@100F 54SSU@210F Viscosity Index 213 Pour Point -18F Flash Point 428F Gravity, Specific API Gravity 22.1 0.922 Wt. 30.00 Price Each
1241
Tractor Transmission/Hydraulic Fluid Mobil Mobilfluid 424

Description: A multipurpose, extreme-pressure, tractor transmission/hydraulic fluid. APPROVED against following specifications: John Deere Quatrol, J20A, J20C. Ford New Holland M2C134D. Massey Ferguson M1135, M1141. White New Idea Q-1802, Q-1826. Allison C-4 and Volvo BM. Denison HF-O, HF-1, HF-2. Sauer Sunstrand. EXCEEDS performance requirements of: Case International J/C 145/MS 1210, J/C 185/MS 1204, MS 1205, MS 1206, MS 1207, B6. Deutz-Allis 821XL. Komatsu Dresser B-06-0001, B-06-0002. Caterpillar TO-2 Powershift. L-20. Ford Type F (Tractor). Dexron and Type A, Suffix A (Tractor). Sunstrand Hydrostatic. Vickers 35VQ25A Pump. Sunstrand 22 Axial Piston Pump. Plessey-Sunstrand Gear Pump. Cincinnati Milacron P-68, P-69, P-70. Copper corrosion (ASTM D 130), 1A Rating. EXCEEDS performance recommendations of: Clark, KH Deutz, Ebru, Fendt, Fiat-Hesston, Hurlimann, International Hough, IMT, Lamborghini, Link Belt, Renk, Schluter, Steyr Daimler Puch, Steiger, Universal, Ursus, Valmet, Zetor. Application: Recommended for top-up and refill of transmissions, differentials, final drives, hydraulics, and power steering systems, as well as wet brakes, PTOs, and hydrostatic drives in farm, contractor, and industrial tractors recommending the above specifications. NOT for use in engine crankcase. NOT for use in passenger car automatic transmissions. Advantages: Considerable improvement in wet brake and PTO chatter control Enhanced shear stability in field service Outstanding low temperature performance Optimized wear protection of gears, pumps and hydraulic valves Improved thermal stability for long service life in severe applications Balanced friction for extended clutch life Good water tolerance and protection from rust and corrosion Freedom from sludge and deposits Good filterability for optimum hydraulic operation. Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Material Safety Data Sheets (MSDS) are available upon request.
Tractor Transmission/Hydraulic Fluid Mobil Mobilfluid 424

Catalog Part No. C1BP90 Mobil Model 424 Container Size 5 gal SAE Grade 10W-30 Viscosity 254SSU@104F 43SSU@212F Viscosity Index 152 Pour Point -46F Flash Point 442F Gravity, Specific API Gravity 29 -Wt. Price Each
1242
Automatic Transmission Fluid Mobil Multi-Purpose ATF

Description: A new generation, premium automatic transmission fluid meeting major U.S. and import car manufacturers' performance requirements. Formulated from special, high quality base oils combined with viscosity index (VI) improvers, antioxidants, antiwear agents, detergents, and defoamants. Contains special friction modifiers or lubricity agents to control the transition from full film to thin film lubrication as a vehicle's band and clutches are activated during shifting. Application: Recommended for make-up and refill in 1974 and later General Motors cars and light trucks, and for make-up and refill in 1988 and later Ford and other vehicles requiring Mercon, as well as 1981 and later Fords requiring an M2C138CJ or M2C166H fluid. May be used in other domestic and imported cars that require a Dexron III, Mercon or Ford Type H fluid. Can be used in off-highway transmission, power steering, and other hydraulic systems requiring a Dexron III or Alison C-4 fluid. Meets industrial hydraulic oil demands of Denison HFO, Vickers vane, and Sunstrand piston pumps. Advantages: Satisfies new car warranty requirements Excellent low-temperature requirements, Smooth, positive shift characteristics under both normal and severe operating conditions Protection against high-temperature deposits during severe service Minimal wear of transmission components Reduced foaming and fluid loss in severe service. Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Material Safety Data Sheets (MSDS) are available upon request.
Fluid Conveying
Automatic Transmission Fluid Mobil Multi-Purpose ATF

Catalog Part No. Mobil Model ATF Container Size 5 gal Color Red Viscosity 166SSU@104F 35SSU@212F Viscosity Index 184 Pour Point -45F Flash Point 370F Gravity, Specific API Gravity 31.3 0.869 Wt. Price Each
C1CK84
1243
Gear Lubricants Mobil Mobilube HD

Description: Multipurpose, heavy-duty, extreme pressure gear lubricants. Made with select, specially processed base oils that provide good stability at high temperatures and good performance at low temperatures. The naturally high viscosity index of the base oil, in combination with the sulphur phosphorous additives, results in exceptional chemical and thermal stability. Antiwear and antifriction additives control wear, scoring, and frictional power losses. These lubricants resist foaming, are compatible with normally used seal and gasket materials, and provide good protection against copper corrosion. They have demonstrated protection against rust resulting from water contamination and storage in a humid atmosphere by passing the L-33 rust test of MIL-PRF-2105E. Application: Intended for initial fill, topping-off and refill of enclosed automotive gear cases of manual or semiautomatic transmissions where gear lubricants are recommended, drive axles, and final drives of passenger cars, trucks, taxicabs, and contractor and farm equipment. These products meet U.S. Military Specification MIL-PRF-2105E, and the requirements of the L-37 and L-42 full-scale axle tests, and are fully approved against Mack Truck specifications GO-H and GO-J. Recommended for API GL-5 Service, covering hypoid and other gears in passenger cars and other automotive equipment operated under high-speed shock load, high-speed low torque, and low-speed high torque conditions. Satisfactory for either topping-off or entirely refilling most differentials, except limited-slip types (severity level of limited-slip types may require factory-provided lubricant). Use at bulk oil temperatures up to 300F is permitted with realistic drain and refill schedules. Steady operation at temperatures above 260F is NOT recommended. These products should NOT be used in transmissions for which engine oil or automatic transmission fluid is recommended, and should NOT be used when an API GL-4 gear oil is recommended. Mobilube HD 80W-90: Meets the viscosity requirements of SAE 80W, 85W, and 90 grade products, and can be used for temperatures down to -15F. Mobilube HD 85W-140: Meets the viscosity requirements of SAE 85W, 90W, and 140 grade products, and can be used for temperatures down to 10F. Advantages: Uninterrupted performance under broad temperature variations Excellent protection against wearing and scoring by high-speed and heavy gear loads Moderate performance in limited slip differentials Superior protection against rusting, staining, corrosion Good thermal stability and foaming resistance Compatible with seals and gaskets. Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. Material Safety Data Sheets (MSDS) are available upon request.
Gear Lubricants Mobil Mobilube HD

Catalog Part No. C1ER42 Mobil Model SAE85W-140 Container Size 5 gal SAE Grade 85W-140 Viscosity 1530SSU@100F 125SSU@210F Viscosity Index 103 Pour Point -18F Flash Point 356F Gravity, API 24.8 Wt. Price Each
1244
Commercial Automotive Engine Oil Exxon XD-3 Extra 15W-40

Exxon XD-3 EXTRA 15W-40 is a super premium quality heavy-duty engine oil that provides outstanding performance in the most severe diesel and gasoline engine applications. Available in an SAE 15W-40 multi-grade, XD-3 EXTRA provides the reliable flow properties of a 15W-40 grade in a cold engine at start-up and the higher-temperature properties of the SAE 40 grade after the engine warms up to operating temperature. Versatile Performance: Exxon XD-3 EXTRA 15W-40 meets API Service Categories CI-4, CH-4, CG-4, CF-4 and CF to provide reliable performance in the latest emission designs, including those with EGR systems, as well as satisfying the needs of older engines. In addition, it meets API SL and SJ requirements for four-stroke gasoline engines. Outstanding Service in Diesel-Powered Equipment: Exxon XD-3 EXTRA 15W-40 can be used where API CI-4, CH-4, CG-4, CF-4, and CF oils are recommended. Additionally, XD-3 EXTRA is approved against Cummins CES 20078, Cummins CES 20076, Cummins 20071, Mack EO-N Premium Plus, Mack EO-N, Mack EO-M Plus, Mack EO-M and Volvo VDS-2 specifications. XD-3 EXTRA has demonstrated excellent performance in the key tests required for the API CI-4 specifications, as well as tests required for OEM specifications. In addition to laboratory engine tests, XD-3 EXTRA additive technology has demonstrated outstanding diesel engine field performance in tests of varying severity. Exxon XD-3 EXTRA is specially formulated to provide excellent performance in all recommended applications. It is extremely resistant to the formation of high-temperature deposits and retains its alkalinity (TBN) over many miles of service. As a result, engines operated with XD-3 EXTRA generally have very low ring-belt deposit levels, and the corrosive wear caused by organic acids is minimized because of the ongoing ability of the oil to neutralize the acids. The excellent dispersancy of XD-3 EXTRA works to keep the cooler areas of the engine virtually free from sludge that can plug oil passages and oil filters and reduce effective lubrication. Formulated for the Severe Demands of Newer Engines: Diesel engines manufactured after October 2002 will be designed to meet very stringent emission requirements. These new engines place more severe demands on a lubricant's oxidation resistance, TBN retention and soot dispersing capabilities. XD-3 EXTRA 15W-40 engine oil is specially formulated for these newer engines and will provide reliable protection against increased heat, acids and soot. Exxon XD-3 EXTRA was specifically formulated to reduce oil make-up requirements. This effect comes for the high-quality base stocks which exhibit lower volatile loss at high temperatures. In addition, XD-3 EXTRA has demonstrated outstanding piston deposit protection. Exxon XD-3 EXTRA 15W-40 can also be used in gasoline engines where API SL or SJ quality oils are recommended. Health & Safety: XD-3 EXTRA should be promptly removed from the skin. Soiled clothing should not remain in contact with the skin. Oils and greases are readily removed from the skin by waterless hand cleaners, followed by washing with soap, water, and a soft skin brush. If petroleum products contact the eyes, flush the eyes with fresh water until the irritation subsides. WARNING: "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks or other sources of ignition; they may explode and cause injury or death. "Empty" drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations. Additional important health and safety information on this product can be found in the Material Safety Data Sheet, available on request.
Fluid Conveying
Commercial Automotive Engine Oil Exxon XD-3 Extra 15W-40

Catalog Part No. C1FW33 Exxon Model XD-3 Container SAE Size Grade 5 gal. 15W-40 Viscosity 540SSU@104F 72SSU@212F Viscosity Pour Index Point 138 -27F Flash Gravity, Point API Wt. Price Each
Note: Lubricating Oil products are NOT stocked at our Distribution Center, and are only available for local pickup at our branch locations. For these products, a BOLD Catalog Part No. means EVERY branch location stocks it, and a Bulleted Catalog Part No. means CERTAIN branch locations stock it.
1245
CRC Chemical Maintenance Products
Industrial Cleaning
Industrial Cleaning
Catalog Part No. CRC Part No. Product All Purpose Cleaner/Degreaser Citrus Cleaner/Degreaser Glass Cleaner Professional Strength Battery Cleaner Container Size 1 gallon bottle 20 oz aerosol 30 oz trigger bottle Description Biodegradable and concentrated. Non-corrosive, non-abrasive. Non-flammable. Safe on most plastics. Low foaming. Pleasant citrus scent. Leaves no residue. Fast evaporation. Biodegradable. Non-corrosive, non-abrasive, non-staining. Professional strength streak-free glass cleaning. Biodegradable, ready to use. Non-abrasive foaming action. Non-flammable, non-ozone depleting. Wt. 9.20 1.25 2.05 0.92 Price Each
C1FR61 14408 C1FR60 14170
C1FR62 14411 C1FR44 03176
12 oz Removes corrosion quickly while neutralizing acid spills. Assures aerosol maximum battery current flow. Promotes longer battery life. 16 oz aerosol Quick drying, leaves no residue, safe on all plastics. Effectively removes soil and other contaminants from electrical and electronic components. Ideal for applications where lower flashpoint solvents can be used.
C1FR42 03130
QD Contact Cleaner
0.96
Lubricants
Lubricants
Catalog Part No. C1FR38 CRC Part No. 03005 Product 3-36 Multi-Purpose Lubricant & Corrosion Inhibitor Container Size 16 oz aerosol Description Cleans, lubricates, penetrates and loosens corrosion. Prevents corrosion by displacing moisture. Penetrates through corrosion to loosen frozen parts. Lubricates without leaving a sticky residue. Cleans light soils and contaminants. Wt. 0.93 Price Each
1246

Lubricants
Catalog Part No. CRC Part No. Product Food Grade Silicone Container Size 16 oz aerosol Description Meets FDA CFR 21-178.3570 for incidental food contact. Forms a colorless, odorless, non-staining film. Harmless to most rubbers & plastics. -40F to 400F. Excellent release agent and lubricant for all surfaces. Penetrates deep and leaves a tough film that lubricates & protects. Resists water wash-off and high temperature sling-off. Absorbs pin/bushing shock and cushions rollers, pins and bushings. Can be applied with guards in place. A multi-purpose silicone spray. Forms a colorless, odorless, non-staining film that lubricates & protects in most metal to non-metal applications. Dry film eliminates binding & sticking while protecting most surfaces. Excellent heat & water resistance. Rust & oxidation inhibitors for superior metal protection. Smooth, buttery consistency. Produces a tough, high viscosity film. White color for easy visual inspection of film coverage. Wt. 0.87 Price Each
C1FR39 03040
C1FR40 03050
Chain & Wire Rope Lubricant
16 oz aerosol
0.87
C1HC80 06077
Marine Silicone Lubricant
12 oz aerosol
0.69
C1FR41
03080
White Lithium Grease
16 oz aerosol
0.90
C1FS54 SL35901
Copper Anti-Seize
Copper-based, safe for use on both ferrous and non-ferrous 8 oz brush Protects parts up to 1800F. Electrically conductive. Will top bottle metals. not harden. Heat aging won't affect lubricity of product. Copper-based, safe for use on both ferrous and non-ferrous 16 oz metals. Protects parts up to 1800F. Electrically conductive. Will aerosol not harden. Heat aging won't affect lubricity of product. Copper-free formula for use where a clean, chemically inert & 8 oz brush stable lubricant is required. Protects parts up to 2400F. top bottle Electrically conductive. Will not harden. Heat aging won't affect lubricity of product. A no-compromise penetrant that attacks corrosion to free 16 oz corroded fasteners & mechanical components. A super-fast, aerosol powerful, concentrated penetrating solvent that loosens & cleans. Instantly penetrates minute & tightly fitted crevices.
0.60
C1FR59 14095
Copper Anti-Seize
1.09
C1FS55 SL35911
Nickel Anti-Seize
0.58
Fluid Conveying
C1JC26
03060
Screwloose Super Penetrant
0.65
Corrosion Inhibitors
Miscellaneous Products Corrosion Inhibitors
Catalog Part No. C1JE82 CRC Part No. 03282 Product SP-400 Corrosion Inhibitor Battery Terminal Protector Zinc-It Instant Cold Galvanize Container Size Description Wt. 0.87 Price Each
Long-term indoor/outdoor corrosion inhibitor that provides 16 oz protection of all equipment subject to heat, humidity, chemicals or aerosol severely corrosive atmospheres. Use on machined surfaces & assemblies subjected to long periods of storage. 12 oz aerosol 16 oz aerosol Soft, flexible film completely encapsulates exposed surfaces and will not become brittle, crack or peel. Dries quickly and protects instantly. Red color for easy visual inspection. Actively fights rust & corrosion with a film of 95% pure zinc. Protects base metal even when scratched or abraded. Fast-drying. Excellent weldability.
C1FR43 03175
0.68
C1FR63 18412
1.10
Electrical Maintenance
Electrical Maintenance
Catalog Part No. CRC Part No. Product Di-Electric Grease Container Size Description Wt. 0.37 Price Each
C1FR17 02085
Non-curing silicone compound used for electrical sealing, 6 oz pressurize lubricating, protecting & insulating. Meets FDA CFR 21-175.300 agent) and CFR 21-178.3570 (lubricant, incidental food d tube (release contact). Excellent lubricant for rubber & plastic parts.
1247
Specialty Products
Specialty Products
Catalog Part No. CRC Part No. Product RTV Silicone Adhesive/Sealants Container Size Description Wt. 0.68 Price Each Clear - Forms a barely visible water-tight seal. RTV (Room Clear 8 oz Temperature Vulcanizing) Adhesive/Sealants are designed for a pressurize wide range of sealing, bonding, protecting and waterproofing d tube applications. White 8 oz White - Designed for high moisture, indoor/outdoor applications. pressurize RTV (Room Temperature Vulcanizing) Adhesive/Sealants are designed for a wide range of sealing, bonding, protecting and d tube waterproofing applications. 16 fl oz bottle 20 oz aerosol Fresh citrus scent. Contains no harsh solvents. pH balanced. Conditions skin. Biodegradable. Fortified with pumice for deep-cleaning power. Fast acting, high strength insecticide. Ergonomic trigger that provides control, even with gloved hands, and is accurate up to 15' away Plastic safe - will not damage plastic connectors and other insulating materials.
C1FR57 14055
C1FR58 14056
RTV Silicone Adhesive/Sealants Mechanix Orange Citrus Lotion Hand Cleaner with Pumice Wasp & Hornet Killer PLUS
0.68
C1FS52
SL1712
1.19
C1AK48
14010
1.16
Greases & Oils

Greases & Oils
Catalog Part No. CRC Part No. Product Marine Grease Container Size Description Wt. 0.98 Price Each For boat trailer wheel bearings. Aluminum complex, NLGI #2 14 oz grease. Excellent water resistance. Superior rust and corrosion cartridge protection. Typical drop point 470F.
Fluid Conveying
C1FS53 SL3120
Vehicle Maintenance
Vehicle Maintenance
Catalog Part No. CRC Part No. Product Bio-Con Diesel Fuel Sludge Sediment Remover Brakleen Brake Parts Cleaner Container Size 12 oz bottle 20 oz aerosol Description Improves storage stability of fuel. Prevents fuel filter plugging. Absorbs moisture. Keeps injectors clean. Quickly removes brake fluid, grease, oil and other contaminants from brake linings and pads. Cleans fast, dries fast, no residue. Non-flammable. Works without disassembly. Wt. 0.83 Price Each
C1GH16 05557
C1GH15 05089
1.46
1248
Lubrication Equipment & Accessories
Heavy Duty Grease Guns

Features: Automatic variable stroke/pressure, air vent fitting, vinyl grip, deluxe pull handle, positive lever stop, heavy-duty one piece head, 3-way loading, loader fitting included. Heavy Duty Grease Guns
Catalog Part No. C1BR62 Alemite Model 500 Pressure Rating Strokes for 1 oz (psi) 7,500 10,000 30 21 Other Features Rigid extension Rigid extension Wt. 3.30 3.49 Price Each
C1KK43 555-GUN
Heavy Duty Deluxe Pistol Grease Gun with 18" Flex Hose
Comes with 18" Flex Hose extension for Hard-to-reach Fittings Convenience of One-hand operation for easy Greasing Heavy-duty, LuCast TM, Cast-Alloy Head with Heavier and Reinforced Wall Thickness for Extra Strength Develops up to 7,000 PSI WARNING : Do not hold Whip Hose while pumping the Grease Gun. Replace damaged Whip Hose with 4500 PSI Rated Hose only Handy 3-way loading - fill with Standard Cartridge, Suction or Bulk Fill Air Bleeder Valve to release Trapped Air Filler Nipple with Ball Check for use with Grease Filler Pump Chrome Plated finish Handle for Maximum Protection against Corrosion Deluxe, Oil-resistant, Contoured Grip for Comfort and Firm Grip Heavy Gauge Steel Barrel (18 Ga) Wide Band, Non-slip Knurling for Sure-grip Handling Tough Follower offers Superior Seal and eliminates Grease Bypass Heavy-duty Follower Spring for Consistent Priming Posi-lock Follower Rod with Ergonomically designed T-handle provides Sure-handed Grip and easy filling at any position Outputs 4 oz. of Grease per 100 Strokes Complete with 4" Extension Pipe, Four Hardened Jaws Hydraulic Coupler with Ball Check and Non-drip Cap. Heavy Duty Deluxe Pistol Grease Gun with 18" Flex Hose
Catalog Part No. C1JP24 Lumax Model LX-1152 Description Pistol Grease Gun with 18 inch Flex Hose Wt. 3.02 Price Each
Fluid Conveying
1249
12 Volt Cordless Grease Gun Kit

Features: High pressure delivery: Up to 6500 PSI High flow rate: 5.25 ounces per minute @ 1000 PSI 3-way loading: 14 oz. cartridge, 16 oz. bulk or suction loaded Lightweight: 6.8 lbs High capacity 12V 1500 mAH NiCd battery 3 ft. ultra-flexible hose, 8000 PSI rated, with industrial grease coupler Air bleeder valve Grease cartridge holder (grease not included) High flow check valve with easy access port One-hour fast charger Heavy duty carrying case. 12 Volt Cordless Grease Gun Kit
Catalog Part No. Alemite Model Description Battery Pack for 12 Volt Cordless Grease Gun Wt. 1.37 Price Each
C1GG60 339804
Grease Fitting / Joint Fitting Cleaner

For use on stubborn or clogged grease fittings and joints Cleans and replenishes old and dry grease fittings Saves the time and expense of replacing a clogged fitting. How It Works: Pour fluid into cylinder. Lightly tap the head of the plunger after coupler is attached to the fitting. Fluid is dispensed into the fitting. Grease Fitting / Joint Fitting Cleaner
Catalog Part No. Alemite Model Description Grease Fitting/Joint Cleaner Wt. 1.48 Price Each
C1GL24 339841
1250
Mobilgrease HP Multipurpose Automotive Grease

Mobilgrease HP is an NLGI No. 2 unleaded, lithium complex soap grease. It has a smooth structure and is extremely adhesive in service. Mobilgrease HP contains extreme pressure additives and oxidation inhibitors. Base oil viscosity is an ISO Grade 220, dropping point is 500 deg. F, or greater. Application: Mobilgrease HP meets the requirements for extended lubrication intervals of automotive chassis lubrication points and disc brake wheel bearings, particularly in passenger cars, light trucks, taxi fleets and farm equipment. It is also recommended for small marine craft. Mobilgrease HP resists water washout and sprayoff. It provides excellent rust protection as well as protection against wear, making it an excellent choice for on- and off-highway heavy duty equipment (fifth wheels, kingpins, u-joints, bucket pins, etc). Note: When wheel bearings are packed for the first time with Mobilgrease HP, remove the old grease completely, wash the bearings with a suitable safety solvent, and dry them thoroughly before repacking. Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Material Safety Data Sheets (MSDS) are available upon request. Mobilgrease HP Multipurpose Automotive Grease
Catalog Model Part No. Number C1CX88 Description Wt. 0.97 Price Each
GREASE 14 oz. tube. Blue color.
Fluid Conveying
Grease Gun Extension Hoses

Economical, durable thermoplastic or rubber/wire braided hoses. 12,000 PSI Burst Pressure. Male 1/8 NPT ends. WARNING: The pressure rating on these hose assemblies apply when used with hand-operated grease pumping equipment ONLY, such as grease guns or bucket pumps. DO NOT use with power operated equipment. Grease Gun Extension Hoses
Catalog Part No. C1JP25 Model LX-1203 Working Length Pressur (in) Mfg. Name e (psi) Alemite Lumax 12 18 6,000 4,500 Hose Type Thermoplastic Thermoplastic Wt. 0.18 0.17 Price Each
C1ZU96 B337595-A1
1251
Couplers
Provides quick, positive, leakproof connection with grease fittings. Grease pressure forces 3 hardened steel jaws against grease fitting. Standard model jaws are reversible for long life. Couplers
Catalog Part No. Alemite Model Thread Female 1/8 NPT Female 1/8 NPT Female 1/8 NPT Type Standard Narrow Narrow Wt. 0.11 0.07 0.07 Price Each
C1ZV22 6304-B C1ZV32 308730-ALEMITE C1KJ93 308730A
Note: 308730A equipped with built-in check valve.
Swivel Couplers
Couplers swivel full 360, locks in any of eight positions. Handy means of engaging out-of-the-way grease fittings. Use 1/8 NPT pipe extension to connect coupler to gun outlet. Swivel Couplers
Catalog Part No. Alemite Model Description Wt. 0.37 0.38 Price Each C1ZU93 B6509-D Standard diameter, metal seal, 3-1/2 inches long C1ZU92 B6509-E Narrow diameter, rubber seal, 4 inches long
Swivels
Permits easy handling of control valves and prevents damage to hoses from twisting. Swivels
Catalog Part No. C1JP84 Alemite Model B52751 Type Straight 90 Z-Type Z-Type Threads 1/4 NPT x 1/2-27 NS Taper 1/4 NPT x 1/2-27 NS Taper 1/4 NPT x 1/2-27 NS Taper 1/4 NPT x 1/4 NPT Wt. 0.30 0.62 0.91 0.92 Price Each C1ZU95 B52750 C1ZU94 B52752 C1GB62 B331107
1252
Grease Fittings
1/8 NPT Fittings: Used on many industrial machines. Features dirt excluding ball check. Maximum pressure 10,000 PSI. 1/4 NPT Fittings: Widely used for larger bearings on farm machinery and industrial equipment. Especially recommended for heavy lubricants in cold weather. Dirt excluding ball check. Maximum pressure 10,000 PSI. 1/4-28 Taper Thread Fittings: Used on most cars and trucks and on many industrial machines. Dirt excluding ball check. Maximum pressure 10,000 PSI. Grease Fittings
Catalog Part No. Alemite Model Thread Type Extra Short Straight Extra Short Straight O.A. Shank Hex Length Length Size (in) (in) (in) 0.66 11/16 0.30 7/16 Wt. 0.01 0.15 Price Each
C1BW22 6000-ARO 1/8 NPT (Mfg is Aro) B1610-BL C1ZV13 (Package of 10) B1688-B C1ZU99 (Package of 10) C1FJ15 B-1613-B (Package of 10) 1/8 NPT
1/8 NPT Extra Short 45
0.89
0.30
0.44
0.23
1/8 NPT Extra Short 90 Extra Short Straight Straight
27/32
0.30
7/16
0.27
Fluid Conveying
B1627-B C1ZV12 (Package of 5) B1641-B C1ZV11 (Package of 10)
1/4 NPT
7/8
0.42
9/16
0.17
1/4-28
35/64
0.19
5/16
0.07
Non-Corrosive Grease Fittings

Alemite non-corrosive fittings withstand the most severe corrosive conditions in both marine and industrial applications, and are never plugged by corrosion. Stainless Steel Models: Identified by a -S in the model number, and 2 notches on hex. Type 303 stainless steel bodies, type 440 stainless steel balls and type 302 stainless steel tempered springs. Monel Models: Identified by a -B in the model number, and 1 notch on hex. Nickel-copper alloy (monel) type R bodies, drawn full hard type R tips, type K monel balls and inconel springs. Non-Corrosive Grease Fittings
O.A. Shank Hex Length Length Size (in) (in) (in) 3/4 17/32 7/16 5/16
Catalog Part No.
Alemite Model
Thread
Type
Wt. 0.02 0.01
Price Each
C1GF69 1961-S C1GF70 1966-S
1/8 NPT Stainless Extra Short Straight 1/4-28 Stainless Straight
1253
Pocket Pack Grease Fitting Assortment

Box contains six types of popular fittings. An identifying chart is included in the cover. Pocket Pack Grease Fitting Assortment
Catalog Part No. Alemite Model Description (12) 1/8 NPT Straight, (6) 1/8 NPT 45, (6) 1/8 NPT 90, (12) 1/4-28 Straight, (6) 1/4-28 45, (6) 1/4-28 90 Wt. 0.88 Price Each
C1ZV35 2365-1
Metric Grease Fitting Assortment

Box contains six types of popular metric fittings. An identifying chart is included in the cover. Metric Grease Fitting Assortment
Catalog Part No. Alemite Model Description (10) M6x1 Straight, (6) M6x1 45, (6) M6x1 90, (6) M8x1 Straight, (6) M8x1 90, (10) M10x1 Straight Wt. 0.73 Price Each
Fluid Conveying
C1ZV34 2371
Button Head Couplers

Button Head Couplers
Catalog Part No. Alemite Model Thread Female 1/8 NPT Type Standard Pull-On Wt. 0.29 Price Each
C1ZV31 42030-A
1254
Needle Nose Adapter

For use in all lubrication tight spots. Consists of contact nozzle and coupler locking sleeve. Needle Nose Adapter
Catalog Part No. Alemite Model Description Needle Nose Adapter, 5 inches long Wt. 0.24 Price Each
C1ZU91 B6783
Adapters
Bright zinc plated steel to resist corrosion. Adapters
Catalog Part No. Alemite Model Description Male 1/4-28 Taper Thread x Female 1/8 NPT Wt. 0.02 Price Each
C1ZV29 51942
Fluid Conveying
Couplings
Couplings
Catalog Part No. Alemite Model Description Female 3/8 NPT x Female 1/2-27 NS Taper Wt. 0.14 Price Each
C1ZV27 53495
Easy-Out Fitting Tools

All-in-one tool to extract broken fittings, re-thread holes and install new straight and angle-type fittings. Easy-Out Fitting Tools
Catalog Part No. Alemite Model Description For fittings with 1/8 NPT thread For fittings with 1/4-28 taper thread Wt. 0.20 0.12 Price Each
C1ZU97 B315791 C1ZU98 B315790
1255
Standard Control Valves

Features: Delivers pre-set, measured shots with trigger partially depressed. Provides continuous flow with trigger fully depressed. Includes 6-1/2 inch extension and 6304-B coupler. Female 1/4 NPT inlet. Standard Control Valves
Catalog Part No. Alemite Model Description Standard Control Valve, 1/4 NPT Wt. 2.82 Price Each
C1ZV21 6320-3
Lever-Action Bucket Pump

Smooth, easy pumping action dispenses all types of Lubricants, even in the coldest weather. Ideal for transferring Motor Oil, Transmission Fluid, Differential Fluid, Heavier Oils and other Automotive Additives Portable Clamps to any 25-50 lb. 5 Gallon Pail All Steel Pump. 1-1/2" Inlet and 1/2" Outlet Port Heavy-duty, LuCast TM, Cast-Alloy Head with Heavier and Reinforced Wall Thickness for Extra Strength and Durability Zinc Plated, Corrosion-resistant Suction Tube Oil-resistant, Contoured Grip for Comfort and Firm Grip Self Priming. Delivers 30 fl. oz. per 12 Strokes Unit Includes : 18" long by 1-1/2" diameter Suction Tube with Rust Resistant 12" Ribbed Cover Assembly with adjusting screws to accommodate variations in drum diameter and 5 ft. Oil Resistant Flex Hose with Curved Nozzle. Lever-Action Bucket Pump
Catalog Part No. C1JP26 Lumax Model LX-1300 Description Lever-Action Bucket Pump Wt. 6.99 Price Each
1256
Plastic Bucket Pump with Flex Hose & Non-Drip Nozzle

Plastic Bucket Pump with Zinc-Plated Steel Tube for transferring Noncorrosive Fluids of Light to Medium Viscosity like, Engine Oil, Gear Oils, Transmission Fluid, Automotive Additives, Machine Oil, etc. Self Priming, Push-down Action Pump 5 Gallon Capacity Drain-back Nozzle prevents Spills and Accidents Precision Buna-n Seal eliminates by-pass Nylon Piston for Durability Zinc Plated, Corrosion-resistant Suction Tube Includes : 50 Oil-resistant Flex Hose with Non-drip Nozzle 1" Inlet Port and 1/4" Outlet Port Discharge Capacity : 3 oz. per Stroke Pump Height : 20. Plastic Bucket Pump with Flex Hose & Non-Drip Nozzle
Catalog Part No. C1JP28 Price Each
Lumax Model LX-1336
Description Plastic Bucket Pump
Wt. 2.23
Lift-Action Steel Barrel Pump with Fixed Steel Spout

Zinc-Plated Steel Barrel Pump for transferring Non-corrosive Fluids of Light to Medium Viscosity like, Motor Oils, Transmission Fluid, Heating Oils, Machine Oil, Automotive Additives, Cleaning Solutions, Lacquer Thinner, Solvents, Diesel Fuel, Kerosene, etc. Fits 55 Gallon Drums (210 l) with Standard 2" Bung Opening Self Priming Die-cast Head with Curved Metal Spout Precision Buna-n Seal eliminates by-pass and Floating Steel Check Valve drains Liquid when not in use Steel Piston for Durability Comes with Adjustable 2" Bung Bushing Zinc Plated, Corrosion-resistant Suction Tube Discharge Spout can be rotated 180 and can be removed to expose Garden Hose threaded outlet Discharge Capacity : 22 Fl. oz. per Stroke 1-1/2" Inlet Port and 3/4" Outlet Port Pump Height : 42". Lift-Action Steel Barrel Pump with Fixed Steel Spout
Catalog Part No. Lumax Model LX-1330 Description Lift-Action Piston-Type Barrel Pump Wt. 4.23 Price Each
Fluid Conveying
C1JP27
Funnels
1257
Funnels
Catalog Part No. C1JP30 C1JP31 C1JP29 Lumax Model LX-1604 LX-1608 LX-1600 Description 48 oz. All-Purpose Plastic Funnel with Hanging Tab. 6 Quart All-Purpose Plastic Funnel with Hanging Tab. 8 oz. All-Purpose Plastic Funnel with Hanging Tab. Long Neck Utility Funnel for Hard-To-Reach Applications. 5" Diameter x 18" long with 1/2" Tip. With Hanging Tab. Wt. 0.18 0.54 0.08 Price Each
C1JP32
LX-1614
0.28
Drain Pans
Drain Pans
Catalog Part No. C1JP35 Lumax Model LX-1710 Description 6 Gallon Galvanized Drain Pan. 19" Diameter x 6" Deep. Heavy-Duty with Ribbed Bottom. Anti-Splash Baffle. Handles. 15 Quart Drainmaster Drain-Direct Pan with Handle & Wheels. 8" Opening with Screw Cap. Catch-All Basket to Retrieve Drain Plug and Filter. O-ring Seal. 6 Quart Plastic Drain Pan with Pouring Lip and Raised Rim Handles. 12" Diameter x 4" Deep. Wt. 4.00 Price Each
Fluid Conveying
C1JP34
LX-1632
2.70
C1JP33
LX-1628
0.66
1258
Notes
1259
Notes
1260

Category Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Catalog Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fluid Power Formulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viscosity - Temperature Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic System Design Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accumulator Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Hose, Fittings & Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Identify Fluid Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thread Size Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thread Style Pressure Performance (Steel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working Pressure Tables, Brass & Stainless Steel Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recommended Assembly Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose & Hose Assembly Ordering and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Assembly Flow Capacity at Suggested Velocities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Assembly Pressure Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fluid Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Routing & Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chemical Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tubing Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial Hose & Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NAHAD Pressure Guideline Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Temperature vs. Pressure Table for Reinforced PVC Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Agency Hose Listings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1262 1297 1311 1331 1331 1332 1332 1334 1334 1337 1337 1348 1349 1350 1351 1352 1353 1354 1355 1357 1364 1365 1365 1367 1372 1379 1380 1380 1386 1387 Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
1261
Product Index
Hydraulic Power & Control Product Page Product Page
0-9
1 Wire Braid Hose . . . . . . . . . . . . . . . . .701, 702, 703, 704, 705 Hose Fittings, Reusable, Full Bore, Brass . . . . . 833 Hose Fittings, Reusable, Full Bore, Steel . . . . . 806 Hose Fittings, Reusable, Reduced Bore, Steel . 800, 801, . . . . . . . . . . . . . . . . . . . . 802, 803, 804, 805 100 Mesh Suction Strainer . . . . . . . . . . . . . . . . . . . . . . . . . 342 12 Volt DC Power Units 362, 363, 364, 365, 370, 371, 372, 373 Valves 261, 262, 263, 264, 265, 266, 267, 268, 269, . . . . 270, 271, 272, 273, 274, 275, 276, 277, 278 120 Volt AC Valves 261, 262, 263, 264, 265, 266, 267, 268, 269, . . . . 270, 271, 272, 273, 274, 275, 276, 277, 278 2 Wire Braid Hose . . . . . . . . . . . . 705, 706, 707, 708, 709, 743 Hose Fittings, Reusable, Skive, Steel . . . . . . . . 807 Hose Fittings, Reusable, Thru-The-Cover, Steel 808 24 Volt DC Power Units . . . 362, 363, 364, 365, 370, 371, 372 Valves 261, 262, 263, 264, 265, 266, 267, 268, 269, . . . . 270, 271, 272, 273, 274, 275, 276, 277, 278 2-Way Manually Operated Directional Control Valves . 202 Pneumatic Manual Valves . . . . . . . . . . . . . . . . . 638 Pneumatic Palm Button Valves . . . . . . . . . . . . . 638 Solenoid Operated Valves, Hydraulic 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 2-Wheel 4-Wheel Selector Valves . . . . . . . . . . . . . . . . . . . . . . . . . 316 3-Way Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . 169, 171 Manually Operated Directional Control Valves . 204 Pneumatic Manual Valves . . . . . . . . . 638, 639, 640 Pneumatic Palm Button Valves . . . . . . . . . . . . . 638 Pneumatic Solenoid Operated Valves . . . . 643, 644 Selector Valves . . . . . . . . . . . . . . . . . . . . . 314, 317 Solenoid Operated Valves, Hydraulic 252, 253, 254, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 4-Way Manually Operated Directional Control Valves . 203, 204, . . . . . . . . . . . . . . . . . . . . . . . . 209, 210, 211 Pneumatic Manual Valves . . . . . 639, 640, 641, 669 Pneumatic Pilot Operated Valves . . . . . . . . . . . 642 Pneumatic Solenoid Operated Valves . . . .644, 645, 646, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 647 Proportional Directional Control Valves . . .212, 213, 214
Solenoid Operated Directional Control Valves . 206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, 275, 276, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277, 278 Solenoid Operated Valves, Hydraulic 256, 257, 258, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259, 260 6-Way Directional Valves . . . . . . . . . . . . . . . . . . . . . . . 315 Selector Valves . . . . . . . . . . . . . . . . . . . . . . . . . 317 70 & 90 Durometer O-Rings, Inch Size . 1192, 1193, 1194, 1195, 1196, 1197 90 Durometer Back Up Rings . . . . . . . . . . . . . . . . . . . . 1198, 1199
A
A/C Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1118 Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . 1127 Abrasion Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757, 759 AC Power Units . . . . . . . . . . . .368, 370, 371, 372, 374 Valves 261, 262, 263, 264, 265, 266, 267, 268, 269, . . . . 270, 271, 272, 273, 274, 275, 276, 277, 278 Accumulator Charging Assemblies . . . . . . . . . . . . . . . . . . . . . 386 Accumulators Inc Accumulators . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Charging Assemblies . . . . . . . . . . . . . . . . . . . . . 386 Accumulators, 3000 PSI Bottom Repairable . . . . . . . . . . . . . . . 385 Adaptall Adapters, BSPP . . . . . . . . . . . . . . . . . . . . . . . . 1016 Adapters, BSPP to 37 Flare, Stainless . . . . . 1035 Adapters, BSPP to 37 Flare, Steel . . . .1008, 1009, 1010 Adapters, BSPP to BSPT, Steel . . . . . . . . . . . 1013 Adapters, BSPP to JIC . . . . . . . . . . . . . . . . . . 1009 Adapters, BSPP to Pipe, Steel . . . . . . . . . . . . 1011 Adapters, BSPP, Steel . . . . . . . . 1015, 1016, 1017 Adapters, JIS 30 Seat (BSPP Thread) To 37 Flare, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1021 Adapters, Kobelco, Steel . . . . . . . . . . . . . . . . . 1022 Adapters, Komatsu, Steel . . . . . . . . . . . . . . . . 1022 Adapters, Metric to 37 Flare, Stainless Steel . 1034 Adapters, Metric to 37 Flare, Steel . . . . . . . . . 1003 JIS Sealing Seats . . . . . . . . . . . . . . . . . . . . . . 1020 Metric Flareless Tube Fittings, Stainless Steel . 901 Adapters,
Fluid Conveying
1262
Product Index
Product Page Product Page Hydraulic Power & Control Aluminum AN Flare Bulkhead Adapters . . . . . 1136 AN Flare Adapters, Aluminum . . . . . . . . . . . . . 1132 Carburetor Adapters, Aluminum . . . . . . . . . . . 1146 Flare To Braze . . . . . . . . . . . . . . . . . . . . . . . . . 1142 Fuel Pump Adapters, Aluminum . . . . . . . . . . . 1146 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 940 Metric to 37 Flare, Steel . . . . . . . . . . . . . . . . . 1139 Metric to Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . 1006 Pipe to Pipe, Aluminum . . . . . . . . . . . . . . . . . . 1140 Pressure Washer . . . . . . . . . . . . . . . . . . 1235, 1236 SAE O-Ring Boss, Aluminum . . . . . . . . . . . . . 1135 Adaptors, Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 Aeroquip Adapters, 37 Flare Union, Steel . . . 978, 979, 980, 981, . . . . . . . . . . . 982, 983, 984, 985, 986, 987 Adapters, Braze & Weld to 37 Flare, Steel . . 1000 Adapters, BSPP to 37 Flare, Steel . . . .1008, 1009, 1010 Adapters, Metric to 37 Flare, Steel . . . .1003, 1004, 1005 Adapters, O-Ring Face Seal Accessories, Steel 949 Adapters, O-Ring Face Seal Braze Type, Steel 941 Adapters, O-Ring Face Seal to 37 Flare, Steel 946 Adapters, O-Ring Face Seal to O-Ring Boss, Steel 942, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 943, 944 Adapters, O-Ring Face Seal to O-Ring Face Seal, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 947, 948 Adapters, O-Ring Face Seal to Pipe, Steel . . . . 945 Adapters, Pipe to 37 Flare, Steel . . 962, 963, 964, 965, . . . . . . . 966, 967, 968, 969, 970, 971, 972 Adapters, Pipe to Hose, Steel . . . . . . . . . . . . . . 977 Adapters, Pipe to Pipe, Steel . . 950, 951, 952, 953, 954, . . . . . . . 955, 956, 957, 958, 959, 960, 961 Adapters, Pipe to SAE O-Ring, Steel 973, 974, 975, 976 Adapters, Restrictor, Steel . . . . . . . . . . . . . . . . 1002 Adapters, SAE O-Ring to 37 Flare, Steel .988, 989, 990, . . . . . . . . . . . . . . . . . . . . . . . . 991, 992, 993 Adapters, SAE O-Ring to SAE O-Ring, Steel . . 994, 995 Adapters, SAE Split Flange to 37 Flare, Steel . 997, 998 Adapters, SAE Split Flange to O-Ring Face Seal, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 999 Flare Nuts, Steel . . . . . . . . . . . . . . . . . . . . . . . . 878 Flare Sleeves, Steel . . . . . . . . . . . . . . . . . . . . . 878 Flaretite Seals . . . . . . . . . . . . . . . . . . . . . . . . . 927 Flexmaster Pipe & Tube Joints . . . . . . . . 937, 938 Hose 699, 700, 701, 702, 703, 704, 705, 706, 707, . . . . 708, 709, 710, 711, 712, 713, 714, 715, 716 Hose Assembly Equipment . . . . . . . . . . . . 753, 754 Hose Assembly Lube . . . . . . . . . . . . . . . . 752, 1157 Hose Assembly Mandrels . . . . . . . . . . . . . . . . . 752 Hose Fittings, Crimp, Stainless Steel . . . . 825, 826 Hose Fittings, E-Z Clip, Steel 816, 817, 818, 819, 820, . . . . . . . . . . . . . . . . . . . . 821, 822, 823, 824 Hose Fittings, Field Crimp, Steel . . . . . . . . . . . . 790 Hose Fittings, Flat Crimp, Convoluted, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 826 Hose Fittings, Flat Crimp, Steel . . . . . . . . . 798, 799 Hose Fittings, Global Skive, Steel . . . . . . . . . . . 791 Hose Fittings, Matchmate TTC, Steel . . .763, 764, 765, 766, 767, 768, 769, 770, 771, 772, 773, 774, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 775, 776 Hose Fittings, Matchmate TTC12, Steel .777, 778, 779, . . . . . . . . . . . . . . . .780, 781, 782, 783, 784 Hose Fittings, OTC, Steel . . . . . . . . . . . . . . . . . 792 Hose Fittings, Polyon Crimp, Brass . . . . . . . . 831 Hose Fittings, Polyon Swage, Steel . . . . . . . . 793 Hose Fittings, Reusable, 1 Wire Braid, Full Bore, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 833 Hose Fittings, Reusable, 1 Wire Braid, Full Bore, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 806 Hose Fittings, Reusable, 1 Wire Braid, Reduced Bore, Steel . . . . . . . . . . . 800, 801, 802, 803, 804, 805 Hose Fittings, Reusable, 2 Wire Braid, Skive, Steel 807 Hose Fittings, Reusable, 2 Wire Braid, Thru-TheCover, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 808 Hose Fittings, Reusable, AirBrake, Steel . . . . . . 812 Hose Fittings, Reusable, Polyon, Steel . . . . . 809 Hose Fittings, Reusable, SOCKETLESS, Brass . 834, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 835, 836 Hose Fittings, Reusable, SOCKETLESS, Steel . . 810, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 811 Hose Fittings, Reusable, Teflon 1 Braid, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 830 Hose Fittings, Reusable, Teflon 1 Braid, Steel 813, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 814, 815 Hose Fittings, Spiral TTC . .785, 786, 787, 788, 789 Hose Protection . . . . 755, 756, 757, 758, 759, 760 Hose Support Clamps . . . . . . . . . . . . . . . . . . . 1100 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . 1098, 1099 ORS Braze Rings . . . . . . . . . . . . . . . . . . . . . . 882 ORS-TF Nuts, Ferrules & Sleeves . . . . . 880, 881 Performance Products . . . 1116, 1117, 1118, 1119, 1120, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1128, 1129, 1130, 1131, 1132, 1133, 1134, 1135, 1136, 1137, 1138, 1139, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149, 1150, 1151, . . . . . 1152, 1153, 1154, 1155, 1156, 1157, 1158 Quick Disconnects, Air . . . 1058, 1059, 1060, 1061, 1062, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1063 Quick Disconnects, Diagnostic . 1083, 1084, 1151,
1263
Product Index
Hydraulic Power & Control Product Page Product Page 1153 Quick Disconnects, Fluid Transfer & Hydraulic 1066, 1067, 1068, 1069, 1070, 1071, 1072, 1073, 1074, . . . . . . . . . . . . . . . . . . . . . . . . . . 1075, 1080, 1152 Quick Disconnects, Fluid Transfer & Refrigerant . . 1078 Quick Disconnects, High Pressure Water Blast 1082 Quick Disconnects, Hydraulic Farm . . . . . . . . 1079 Quick Disconnects, Hydraulic Tool . . . . 1076, 1077 Quick Disconnects, Oil Drain . . . . . . . . . 1081, 1150 STC Connector Release Tools . . . . . . . . . . . . 752 Swivel Joints . . . . . . . . . . . . . . . . 1110, 1111, 1112 Versil Flare Nuts & Ferrules . . . . . . . . . . . . . . 879 Agency Hose Listings . . . . . . . . . . . . . . . . . . . . . . . . . . 1387 AGS Brake Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . 876 Air Air Tool Hose Assemblies . . . . . . . . . 666, 667, 668 Chucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Coiled Hose Assemblies . . . . . . . . . . . . . . . . . . 667 Cylinders . . . . . . . . . 630, 631, 632, 633, 634, 635 Flow Control Valves . . . . . . . . . . . . . . . . . . 650, 651 Hose . . . . . . . 718, 719, 721, 722, 739, 740, 1117 Hose Assemblies . . . . . . . . . . . . . . . . . . . . 667, 750 Hydraulic Pumps . . . . . . . . . . . . . . . . . . . . . . . . 415 Quick Disconnects . 1058, 1059, 1060, 1061, 1062, 1063, . . . . . . . . . . . . . . . . . . . . . . . . . 1064, 1065 Safety Pop-Off Valves . . . . . . . . . . . . . . . . . . . . 668 Valves, Manually Operated 638, 639, 640, 641, 669 Valves, Palm Button . . . . . . . . . . . . . . . . . . . . . 638 Valves, Pilot Operated . . . . . . . . . . . . . . . . . . . . 642 Valves, Plug Type . . . . . . . . . . . . . . . . . . . 298, 299 Valves, Solenoid Operated 643, 644, 645, 646, 647 Air & Multi-Purpose Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 717, 720 Air Brake Gladhands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1114 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 739, 740 Hose Fittings, Steel . . . . . . . . . . . . . . . . . . . . . . 812 Hose Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1113 Tube Fittings, Compression, Brass, Nylon Tubing . 909, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 910 Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873 Air Conditioning Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743, 744 Hose Fittings . . . . . . . . . . . . . . . . . . . . . 1118, 1127 Air Cooled Heat Exchangers . . . . . . . . . . . . 394, 395, 396, 397 Air Fittings, Dixon Air King Couplings . . . . . . . . . . . . . . 852, 853 Air Line Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657, 662 FRL's . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 Lubricating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 667 Lubricators . . . . . . . . . . . . . . . . . . . . . . . . . 660, 664 Piggyback Filter/Regulators . . . . . . . . . . . . 659, 663 Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 658 Air Operated Diaphragm Pumps . . . . . . . . . . . . . . . . . . . 126, 127 Air Preparation Filters . . . . . . . . . . . . . . . . . . . . . . . . . 657, 662, 665 FRL's . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 Lubricators . . . . . . . . . . . . . . . . . . . . . . . . . 660, 664 Piggyback Filter/Regulators . . . . . . . . . . . . 659, 663 Regulators . . . . . . . . . . . . . . . . . . . . . . . . . 658, 663 Air Valve Exhaust Mufflers . . . . . . . . . . . . . . . . . . . . . . . . 652 Speed Controls . . . . . . . . . . . . . . . . . . . . . 652, 653 Alemite Grease Fitting Cleaner . . . . . . . . . . . . . . . . . . . 1250 Grease Guns & Accessories . . . 1249, 1250, 1251, 1252, . . . . 1253, 1254, 1255, 1256, 1257, 1258 Alkon Brass Push-In Tube Fittings . . . . . . . . . . . 917, 918 Alliance Plastics Protective Plastic Closures . . . . . . . . . . 1095, 1096 Allied Witan Air Valve Exhaust Mufflers . . . . . . . . . . . . . . . . . 652 Air Valve Speed Controls . . . . . . . . . . . . . . . . . . 653 Breather Vent Filters . . . . . . . . . . . . . . . . . . . . 1227 Allison Transmission Modulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670 Aluminum AN Flare Adapters . . . . . . . . . . . . . . . . . . . . . . 1132 AN Flare Bulkhead Adapters . . . . . . . . . . . . . . 1136 AN Flare to Pipe Adapters . . . . . . . . . . . . . . . . 1137 AN Tube Fittings . . . . . . . . . . . . . . . . . . . . . . . 1135 Carburetor Adapters . . . . . . . . . . . . . . . . . . . . 1146 Crushwashers . . . . . . . . . . . . . . . . . . . . . . . . . 1155 Flow Control Valves . . . . . . . . . . . . . . . . . . . . . . 281 Fuel Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . 1147 Fuel Pump Adapters . . . . . . . . . . . . . . . . . . . . 1146 Hose Barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846 Hose Connectors, PRO CLAMP . . . . . . . . . 1154 Hose Fittings, SOCKETLESS . . . . . . . . . . . 1124 In-Line Fuel Pressure Adapters . . . . . . . . . . . . 1147 NFPA D03 Cover Plates . . . . . . . . . . . . . . . . . . 338 NFPA D03 Parallel Manifolds . . . . . . . . . . . . . . 337 NFPA D05 Parallel Manifolds . . . . . . . . . . . . . . 338 O-Ring Boss Adapters . . . . . . . . . . . . . . . . . . . 1135 Pin Lug Couplings . . . . . . . . . . . . . . . . . . . . . . . 846 Pipe Adapters . . . . . . . . . . . . . . . . . . . . . . . . . 1140 Pneumatic Cylinders . . . . . . . . . . . . . 630, 631, 635 Quick-Disconnect Couplings . . . . . . . . . . . . . . 1150 Subplates . . . . . . . . . . . . . . . . . . . . . . 336, 337, 338
Fluid Conveying
1264
Product Index
Product Page Product Page Hydraulic Power & Control Tank Welding Bungs . . . . . . . . . . . . . . . . . . . . 1142 American Coupling Hose Barbs . . . . . . . . . . . . . . . . . . . . 839, 840, 841 American Cylinder Cylinders . . . . . . . . . . . . . . . . . . . . . . 630, 631, 634 AN Aluminum Flare Bulkhead Adapters . . . . . . . . 1136 Flare Adapters, Aluminum . . . . . . . . . . . . . . . . 1132 Tube Fittings, Aluminum . . . . . . . . . . . . . . . . . 1135 Anaerobic Pipe Thread Sealants . . . . . . . . . . . . . . 1223, 1224 Analysis Kits, Hydraulic Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Anchor SAE 4-Bolt Flanges 1085, 1086, 1087, 1088, 1089, 1090, . . . . . . . . . . . . . . . . . . . . . . . . . 1091, 1092 Split Flange Kits . . . . . . . . . . . . . . . . . . . . . . . . 1097 Anchor Flange Weld Couplings . . . . . . . . . . . . . . . . . . . . . . . . . 939 Anderson Brass Plug Valves . . . . . . . . . . . . . . . . . . . . . . . . 298, 299 Anti-Seize Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1228 Teflon Tape . . . . . . . . . . . . . . . . . . . . . . . . . . 1225 Anti-Seize, Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Anti-Vibration Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Anti-Wear Hydraulic Fluid . . . . . . . . . . . . . . . 1239, 1240, 1241 Apollo Ball Valves, Bronze . . . . . . . . . . . . . . . . . . 168, 169 Ball Valves, Stainless Steel . . . . . . . . . . . . . . . . 171 Ball Valves, Steel . . . . . . . . . . . . . . . . . . . . . . . . 169 Approvals, Hose Agency Listings . . . . . . . . . . . . . . . . . . . 1387 AQP Hose 699, 700, 703, 708, 721, 733, 739, 740, 1117 Aro Air Valve Exhaust Mufflers . . . . . . . . . . . . . . . . 652 Air Valve Speed Controls . . . . . . . . . . . . . . . . . 652 Aro-flo FRL's . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 Aro-flo Series Filter/Regulators . . . . . . . . . . . . . 659 Aro-flo Series Filters . . . . . . . . . . . . . . . . . . . . . 657 Aro-flo Series Lubricators . . . . . . . . . . . . . . . . . 660 Aro-flo Series Regulators . . . . . . . . . . . . . . . . . 658 Cylinders . . . . . . . . . . . . . . . . . . . . . . 632, 633, 635 Diaphragm Pumps . . . . . . . . . . . . . . . . . . . 126, 127 Flow Control Valves . . . . . . . . . . . . . . . . . . 650, 651 Lubricating Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 660 Manually Operated Pneumatic Valves 638, 639, 640 Palm Button Pneumatic Valves . . . . . . . . . . . . . 638 Pilot Operated Pneumatic Valves . . . . . . . . . . . 642 Solenoid Operated Pneumatic Valves 643, 645, 647 Arrow Clear PVC Tubing . . . . . . . . . . . . . . . . . . . 736, 874 PVC Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874 Ashcroft Gauges . . . . . . . . . . . . . . . . . . . . . . . 388, 389, 390 ASME Air Safety Pop-Off Valves . . . . . . . . . . . . . . . . . 668 Assemblies, Hydraulic Hose . . . . . . . . . . . . . . . . . 747, 748, 749 Automatic Transmission Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1243
B
Back Pressure Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 Back-Up Rings, Assortment Kits . . . . . . . . . . . . . . . . . . . 1204, 1205 Inch Size . . . . . . . . . . . . . . . . . . . . . . . . 1198, 1199 Ball Sleeve Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 814 Ball Valves, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637 Bronze . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168, 169 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169, 170 Band Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 865 Band Clamps, Clampco T-Bolt . . . . . . . . . . . . . . . . . . . . . . . . . 862 T-Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 859, 860 Band-It Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 865 Hose Clamp Buckles . . . . . . . . . . . . . . . . . . . . . 865 Preformed Hose Clamps . . . . . . . . . . . . . . . . . . 864 Banjo Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 814 Banjo, Metric Banjo Hose Barbs . . . . . . . . . . . . . . . . . 1148 Barksdale Pressure Switches . . . . . . . . . . . . . . . . . . . . . . . 399 Barnes DC Motor & Pump Assemblies . . . . . . . . . . . . . 373 Flow Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 GC8000 & GC8001 Series DC Power Units . . . 362, 363, . . . . . . . . . . . . . . . . . . . . 364, 365, 366, 367 GC9000 Series AC Power Units . . . . . . . . 368, 369 HE2000 Series Power Units . . . . . . . 370, 371, 372 Barrel Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1257 Battery Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246
1265
Product Index
Hydraulic Power & Control Product Page Product Page Terminal Protector . . . . . . . . . . . . . . . . . . . . . . 1247 Bearing Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Bearing Maintenance Puller Sets . . . . . . . . . . . . . . . . . . . . . . . . . 434, 435 Bearings, Self Aligning . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 Bend Restrictors, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757 Bilge Hose, Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . 734 Billets, Splined . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Biodegradable Hydraulic Fluid . . . . . . . . . . . . . . . . . . . . . . . . . 1241 Black Iron Pipe Fittings . . . . . . . . . . . . . . . . . . . . 930, 931, 932 Bladder Accumulators . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 Boeshield T-9 Corrosion Shield . . . . . . . . . . . . . . . . . . . . . . . 1228 Bolt Extenders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Bolts, BSP Banjo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1149 Metric Banjo . . . . . . . . . . . . . . . . . . . . . . . . . . . 1148 Bonomi Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637 Books, Fluid Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Boots, Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Boss Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Boss O-Ring Assortment Kits . . . . . . . . . . . . . . . . . . . . . . . . 1202 Boston Easy Couple Hose . . . . . . . . . . . . . . . . . . . . . 720 Marathoner Hose . . . . . . . . . . . . . . . . . . . . . . 718 Ultraforce Hose . . . . . . . . . . . . . . . . . . . . . . . . 717 Box Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Brackets, Cylinder Clevis . . . . . . . . . . . . . . . . . . . . . . . . . . 633 Brake Adapters, Inverted Flare . . . . . . . . . . . . . . . . . 1143 Adapters, Metric . . . . . . . . . . . . . . . . . . . . . . . 1144 Adapters, Metric Banjo . . . . . . . . . . . . . . . . . . 1144 Adapters, SAE Banjo . . . . . . . . . . . . . . . . . . . . 1143 Hose, Offroad . . . . . . . . . . . . . . . . . . . . . . . . . 1118 Brake Line Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 876 Brand Hydraulics Directional Control Valves . . . . . . . . . 209, 210, 211 Flow Control Valves . . . . . . . . . . . . . . . . . . 287, 288 Flow Divider Valves . . . . . . . . . . . . . . . . . . 290, 291 Lock Valves, PC Series . . . . . . . . . . . . . . . . . . . 183 Relief Valves, RL . . . . . . . . . . . . . . . . . . . . . . . . 302 Shuttle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Brass 45 Flare Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . 902 Adapters, 42 Inverted Flare to Pipe . . . 1053, 1054 Adapters, 45 Flare Union . . . . . . 1049, 1050, 1051 Adapters, 45 Inverted Flare to 45 Flare . . . . 1052 Adapters, Garden Hose . . . . . . . . . . . . . . . . . . 1056 Adapters, Inverted Flare Unions & Accessories 1055 Adapters, Pipe to 37 Flare . . . . . . . . . . . . . . . 1044 Adapters, Pipe to 45 Flare 1045, 1046, 1047, 1048 Adapters, Pipe to Pipe . . . 1037, 1038, 1039, 1040, 1041, . . . . . . . . . . . . . . . . . . . . . . . . . 1042, 1043 Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637 Check Valves . . . . . . . . . . . . . . . . . . . 173, 174, 175 Drain Cocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649 Flow Control Valves . . . . . . . . . . . . . . . . . . 279, 280 Hose Barbs . . . . . . . . . . . . . . . . . . . . 839, 840, 841 Hose Ferrules . . . . . . . . . . . . . . . . . . . . . . . . . . 867 Hose Fittings, Marine Steering, Crimp . . . . . . . . 832 Hose Fittings, Marine Steering, Reusable . . . . . 837 Hose Fittings, Polyon Crimp . . . . . . . . . . . . . . 831 Hose Fittings, Reusable, 1 Wire Braid, Full Bore 833 Hose Fittings, Reusable, SOCKETLESS . . . . 834, 835, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 836 King Combination Nipples . . . . . . . . . . . . . . . . . 842 Needle Valves . . . . . . . . . . . . . . . . . . . . . . 294, 295 Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . 928, 929 Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . 936 Plug Valves . . . . . . . . . . . . . . . . . . . . . . . . 298, 299 Quick Disconnects, Air . . . . . . . . . . . . . . 1059, 1062 Quick Disconnects, Hydraulic . . . . . . . . . . . . . 1074 Tube Fittings, Air Brake, Nylon Tubing . . . 909, 910 Tube Fittings, Compression . . . 903, 904, 905, 906, 907, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908 Tube Fittings, Flareless . . . . . . . . . . . . . . . 911, 912 Tube Fittings, Push > Connect 913, 914, 915, 916 Tube Fittings, Push > Connect, Metric . . 922, 923 Tube Fittings, Push-In . . . . . . . . . . . . . . . . 917, 918 Tube Fittings, Quick > Connect . . . . 924, 925, 926 Braze Adapters, O-Ring Face Seal Braze Type, Steel 941 Rings, ORS . . . . . . . . . . . . . . . . . . . . . . . . . . . 882 Braze & Weld Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1142 Adapters, Braze & Weld to 37 Flare, Steel . . 1000 Breathers,
Fluid Conveying
1266
Product Index
Product Page Product Page Hydraulic Power & Control Power Unit . . . . . . . . 375, 376, 377, 378, 379, 380 Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1227 Brennan Adapters, 37 Flare, Steel 978, 979, 980, 981, 982, 984, . . . . . . . . . . . . . . . . . . . . . . . . 985, 986, 987 Adapters, O-Ring Face Seal to Pipe, Steel . . . . 945 Adapters, O-Ring Face Seal to Straight Thread ORing, Steel . . . . . . . . . . . . . . . . . . . 942, 943, 944 Adapters, O-Ring Face Seal, Steel . . . . . . 947, 948 Adapters, Pipe to 37 Flare, Steel . . 962, 964, 965, 966, . . . . . . . . . . . . . . . .967, 969, 970, 971, 972 Adapters, Pipe to Hose, Steel . . . . . . . . . . . . . . 977 Adapters, Pipe to Pipe, Steel . . 950, 951, 952, 953, 954, . . . . . . . . . . . . . . . .955, 956, 957, 958, 961 Adapters, Pipe to SAE O-Ring, Steel 973, 974, 975, 976 Adapters, SAE O-Ring to 37 Flare, Steel .988, 989, 990, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 991, 993 Adapters, SAE O-Ring to Hose, Steel . . . . . . . . 996 Adapters, SAE O-Ring to SAE O-Ring, Steel . . 994, 995 Bronze Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . 168, 169 Gate Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 Y Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1229 Bronze Filled Piston Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 1191 BSP Banjo Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . 1149 Bonded Seals . . . . . . . . . . . . . . . . . . . . . . . . . 1094 BSPP Adapters, BSPP to 37 Flare, Stainless . . . . . 1035 Adapters, BSPP to 37 Flare, Steel . . . .1008, 1009, 1010 Adapters, BSPP to BSPT, Steel . . . . . . . . . . . 1013 Adapters, BSPP to Metric, Steel . . . . . . . . . . . 1012 Adapters, BSPP to O-Ring Face Seal, Steel . . 1014 Adapters, BSPP to Pipe, Steel . . . . . . . . . . . . 1011 Adapters, BSPP, Steel . . . . . . . . 1015, 1016, 1017 Hose Fittings . . . . . . . . . . .771, 772, 782, 789, 805 BSPT Adapters, BSPP to BSPT, Steel . . . . . . . . . . . 1013 Adapters, BSPT to 37 Flare, Steel . . . . . . . . . 1019 Adapters, BSPT to Pipe, Steel . . . . . . . . . . . . 1018 Bucket Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . 1256, 1257 Buckles, Hose Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . 865 Bullseye Sight Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Bump Tube Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 805 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . 1098, 1099 Buna-N O-Ring Assortment Kits . . . . . . . . . . . . . . . . . . 1202 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . 1192, 1197 Quad Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . 1185 U-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1179 Bundling Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 759 Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 759, 760 Bungs, Aluminum Welding . . . . . . . . . . . . . . . . . . . . . . 1142 Butane Gas Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742
C
Cable Ties 1233 Cables, Control 1208, 1209, 1210, 1211, 1212, 1213, 1214, 1215, 1216, 1217, 1218, 1219, 1220, 1221, 1222 Cam & Groove Couplers & Adapters . . . . . . . . . . . . . 847, 848, 849 Canfield Multiple Control Connector . . . . . . . . . . . . . . . . 410 Solenoid Connectors . . . . . . . . . 333, 334, 335, 410 CaPlugs, Protective Plastic Closures . . . . . . . . . . 1095, 1096 Carbon Steel Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869 Tubing, Metric . . . . . . . . . . . . . . . . . . . . . . . . . . 870 Carburetor, Adapters, Aluminum . . . . . . . . . . . . . . . . . . . . 1146 Cartridge Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 Counterbalance Valves . . 188, 189, 190, 191, 192, 193, . . . . . . . . . . . . . . . . . . . . 194, 195, 196, 197 Directional Valves . . . . . . . . . . . . . . . . . . . . . . . 202 Flow Control Valves . . . . . . . . . . . . . . 283, 284, 285 Flow Divider Valves . . . . . . . . . . . . . . . . . . . . . . 292 Hand Pumps . . . . . . . . . . . . . . . . . . . . . . . 124, 125 Needle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Pilot-Operated Check Valves . . 181, 182, 184, 185, 186 Pressure Reducing Valves . . . . . . . . . . . . 300, 301 Relief Valves . . . . . . 304, 305, 306, 307, 308, 309 Shuttle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 326 Solenoid Valves 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, . . . . . . . . . . . . . . . . 255, 256, 257, 258, 259, 260 Valves, Slip-In . . . . . . . . . . . . . . . . . . . . . . . . . . 318 Cartridge Valve Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Cast Iron Foot Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . 130
1267
Product Index
Hydraulic Power & Control Product Page Product Page Piston Rings . . . . . . . . . . . . . . . . . . . . . . . . . . 1181 Caterpillar D-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1185 Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . 786, 787 Center Hole High Force Cylinders . . . . . . . . . . . . . . . . . . . . . 409 Center Punch Hose Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 865 Centrifugal Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128, 129 C-Face Pump/Motor Mounts . . . . . . . . . . . . . . . . . . . . . 382 Chain Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Chain Wrenches, Power Team . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 Channellock Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1232 Charging Assemblies, Accumulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386 Char-Lynn Motors, 10,000 Series . . . . . . . . . . . . . . . . . . . . 143 Motors, 2000 Series . . . . . . . . . . . . . . . . . 139, 140 Motors, 4000 Series . . . . . . . . . . . . . . . . . . . . . 141 Motors, 6000 Series . . . . . . . . . . . . . . . . . . . . . 142 Motors, H Series . . . . . . . . . . . . . . . . . . . . 133, 134 Motors, J Series . . . . . . . . . . . . . . . . . . . . . . . . . 135 Motors, S Series . . . . . . . . . . . . . . . . . . . . 136, 137 Steering Units, Columns, Wheels . . . 162, 163, 164 Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Check Valves, Brass . . . . . . . . . . . . . . . . . . . . . . . . . 173, 174, 175 Pilot Operated . . . . . 181, 182, 183, 184, 185, 186 Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Stack (Sandwich), D03 . . . . . . . . . . . . . . . . . . . 320 Steel . . . . . . . . . . . . . . . . .173, 174, 175, 176, 177 Chemical Pumps, Air-Operated Diaphragm . . . . . . . 126, 127 Circuit Maker Cartridge Valve Packages . . . . . . . . . . . . . . . . . 284 Citrus Plant Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . 1238 Clampco T-Bolt Band Clamps . . . . . . . . . . . . . . . . . . . . . 862 Clamps, Band-It Preformed Hose Clamps . . . . . . . . . . 864 Dixon F Series Preformed Center Punch . . . . . 865 Double Bolt Hose Clamps . . . . . . . . . . . . . . . . . 866 Hose Support . . . . . . . . . . . . . . . . . . . . . 1100, 1155 Oetiker 2-Ear Pinch . . . . . . . . . . . . . . . . . . . . . . 856 Oetiker Stepless Ear Pinch Clamps . . . . . . . . 857 Oetiker Stepless Spring Clamps . . . . . . . . . . . 861 Pipe & Tubing Support . . 1101, 1102, 1103, 1104, 1105, . . . . . . . . . . . . . . . 1106, 1107, 1108, 1109 PRO CLAMP Aluminum Hose Connectors . 1154 Spiral Double Bolt Hose Clamps . . . . . . . . . . . . 866 T-Bolt . . . . . . . . . . . . . . . . . . . . . . . . . 859, 860, 862 Trident Marine Constant-Torque Clamps . . . . 863 Worm Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 855 Clean Cart Filter Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359 Cleaning Products, CRC . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Clevis Brackets, Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 633 Clevis, Cylinder Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . 633 Clutch Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 CO2 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715 Code 61 Split Flange Kits . . . . . . . . . . . . . . . . . . . . . . . . 1097 Code 62 Split Flange Kits . . . . . . . . . . . . . . . . . . . . . . . . 1097 Coil Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Coiled Hose Air Hose Assemblies . . . . . . . . . . . . . . . . . . . . . 667 Coils, Cartridge Valves . . . . . . . . . . . . . . . . . . . . . . . . 332 Vickers DG4S4-01 50 Series . . . . . . . . . . . . . . . 276 Vickers DG4S4-01 60 Series . . . . . . . . . . . . . . . 271 Vickers DG4V-3 & DG4V-3S . . . . . . . . . . . . . . . 265 Columns, Steering . . . . . . . . . . . . . . . . . . . . . . . 162, 163, 164 Combination Nipples, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 842 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 845 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843 Commercial Dump Pump Replacements . . . . . . . . . . . . 120, 121 Composite Flow Control Valves . . . . . . . . . . . . . . . . . . 650, 651 Compression Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 836 Tube Fittings, Brass . 903, 904, 905, 906, 907, 908 Compressor Discharge Hose . . . . . . . . . . . . . . . . . . . . . . . . . 744, 745, 746 Constant Pressure Hydraulic Hose . . . . . . . . . . . . . . . . . . . . . . . . . 705 Constant-Torque Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 863 Contact Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246
Fluid Conveying
1268
Product Index
Product Page Product Page Hydraulic Power & Control Contractor's Air Hose Assemblies . . . . . . . . . . . . . . . . . . . . . 750 Water Suction & Discharge Hose Assemblies . . 750 Control Cables 1208, 1209, 1210, 1211, 1212, 1213, 1214, 1215, 1216, 1217, 1218, 1219, 1220, 1221, 1222 Valves, Manually Operated 202, 203, 204, 209, 210, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211, 669 Valves, Manually Operated Directional . . .205, 206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, . . . . . . . . . . . . . . . . . . . . . . . . . 234, 235, 236, 237 Valves, Proportional Directional . . . . 212, 213, 214 Valves, Solenoid Operated Directional . . .206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, 275, 276, 277, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 Coolant Hose . . . . . . . . . . . . . . . . . 1116, 1117, 1118, 1119 Coolers, Heat Exchangers . . . . . . . . . . . . 394, 395, 396, 397 Cooling Truck Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Cooling Refill Quick Disconnects . . . . . . . . . . . . . . . . . . . . . . 1150 Copper Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Washers, Metric . . . . . . . . . . . . . . . . . . . . . . . . 1094 Cordless Grease Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . 1250 Cordura Abrasion Sleeve . . . . . . . . . . . . . . . . . . . . . . . . 757 Corrosion Inhibitors, Boeshield T-9 . . . . . . . . . . . . . . . . . . . . . . . . 1228 CRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1247 Corrosion Protection Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1227 Counterbalance Valves 188, 189, 190, 191, 192, 193, 194, 195, 196, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Couplers, High Force Hydraulic . . . . . . . . . . . . . 404, 405, 422 Couplings, Flexible, Spider Type . . . . . . . . . . . . . . . . . . . . . 381 Radiator/Cooling Refill . . . . . . . . . . . . . . . . . . . 1150 Splined . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 939 Cover Plates, NFPA D03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 CRC Chemical Maintenance Products . 1246, 1247, 1248 Crimp Hose 699, 700, 701, 702, 705, 706, 707, 708, 709, . . . . . . . . . . . . . . . . . . . . . . . . . 710, 711, 712, 743 Hose Fittings, Field Crimp, Steel . . . . . . . . . . . . 790 Hose Fittings, Global Skive, Steel . . . . . . . . . . . 791 Hose Fittings, Marine Steering, Brass . . . . . . . . 832 Hose Fittings, Matchmate TTC, Steel . . .763, 764, 765, 766, 767, 768, 769, 770, 771, 772, 773, 774, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 775, 776 Hose Fittings, Matchmate TTC12, Steel .777, 778, 779, . . . . . . . . . . . . . . . .780, 781, 782, 783, 784 Hose Fittings, OTC, Steel . . . . . . . . . . . . . . . . . 792 Hose Fittings, Polyon Crimp, Brass . . . . . . . . 831 Hose Fittings, Polyon Swage, Steel . . . . . . . . 793 Hose Fittings, Synflex Swage, Steel . . . .794, 795, 796, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 797 Machines . . . . . . . . . . . . . . . . . . . . . . . . . . 753, 754 Crimp Fittings, Marine Steering, Brass . . . . . . . . . . . . . . . . . . . 832 Polyon, Brass . . . . . . . . . . . . . . . . . . . . . . . . . 831 Crimp Sockets, Flat Crimp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 798 Global Skive . . . . . . . . . . . . . . . . . . . . . . . . . . . 791 Cross Selector Valves . . . . . . . . . . . . . . . . . 314, 315, 316 Cross Manufacturing Cushion Valves, RC . . . . . . . . . . . . . . . . . . . . . . 200 Motors, 40 Series . . . . . . . . . . . . . . . . . . . . . . . . 144 Cross Port Relief Valves . . . . . . . . . . . . . . . . . . . . . . . 198, 201 Crushwashers, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1155 Cushion Valves . . . . . . . . . . . . . . . . . . . . 198, 199, 200, 201 Custom Hydraulic Cylinders . . . . . . . . . . . . . . . . . . 160, 161 Cutter, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824, 1158 Cylinder Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 633 Pump Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Cylinder, Repair Kits, Heil . . . . . . . . . . . . . . . . . . . . . . . . 1206 Telescopic Cylinder Parts . . . . . . . . . . . 1206, 1207 Cylinders, High Force . . . . . . . . . . . . .406, 407, 408, 409, 410 Hydraulic, Aluminum . . . . . . . . . . . . . . . . . . . . . 161 Hydraulic, Custom . . . . . . . . . . . . . . . . . . . 160, 161 Hydraulic, Double Rod End . . . . . . . . . . . . . . . . 161 Hydraulic, Integrated Valving . . . . . . . . . . . . . . . 161 Hydraulic, Linear Feedback . . . . . . . . . . . . . . . . 161 Hydraulic, Locking . . . . . . . . . . . . . . . . . . . . . . . 161 Hydraulic, Piggyback . . . . . . . . . . . . . . . . . . . . . 161
1269
Product Index
Hydraulic Power & Control Product Page 161 161 161 161 160 161 635 Product Page Hydraulic, Ram . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic, Rephase . . . . . . . . . . . . . . . . . . . . . . Hydraulic, Screw Actuators . . . . . . . . . . . . . . . . Hydraulic, Telescopic . . . . . . . . . . . . . . . . . . . . Hydraulic, Tie Rod . . . . . . . . . . . 157, 158, 159, Hydraulic, Welded . . . . . . . . . . . . . . . . . . . 160, Pneumatic . . . . . . . . 630, 631, 632, 633, 634, Pumps, Air Operated . . . . . . . . . . . . . . . . . 126, 127 Di-Electric Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1247 Diesel Engine Pump Mounts . . . . . . . . . . . . . . . . . . . . 382 Diesel Fuel Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . 1248 Dill Tire Service Products . . . . . . . . . . . . . . . . . . . 1230 DIN 24342 Slip-In Cartridge Valves . . . . . . . . . . . . . . . . . . . 318 DIN 3902 Hose Fittings . . . . . . . . . . . . . . . 773, 774, 775, 783 DIN 43650 Solenoid Valve Connectors . . . . . . . . 333, 334, 410 Direct Acting Solenoid Valves, Hydraulic, 2-way . . . . . . 238, 245 Solenoid Valves, Hydraulic, 3-way . 252, 253, 254, 255 Solenoid Valves, Hydraulic, 4-way . 256, 257, 258, 259, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 Directional Control Valves, Manually Operated . 202, 203, 204, 209, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210, 211 Control Valves, Proportional . . . . . . . 212, 213, 214 Control Valves, Solenoid Operated . 206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, 275, 276, 277, 278 DIRT-Gate Reservoir Vent Filters . . . . . . . . . . . . . . . . . . . . 378 Divider/Combiner Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Dixon Air King Couplings . . . . . . . . . . . . . . . . . . . 852, 853 Air Safety Pop-Off Valves . . . . . . . . . . . . . . . . . 668 Cam & Groove Couplers & Adapters . 847, 848, 849 Double Bolt Hose Clamps . . . . . . . . . . . . . . . . . 866 F Series Preformed Center Punch Hose Clamps 865 Hose Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 King Combination Nipples, Stainless Steel . . . . 845 King Combination Nipples, Steel . . . . . . . . . . . . 843 King Nipples, Brass . . . . . . . . . . . . . . . . . . . . . . 842 Quick Disconnects, Air . . . . . . . . . 1059, 1060, 1064 Steel Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . 843 T-Bolt Band Clamps . . . . . . . . . . . . . . . . . . . . . . 859 Utility Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Worm Gear Hose Clamps . . . . . . . . . . . . . . . . . 855 DMIC Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 Doering Hand Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
D
D03 Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 Parallel Valve Manifolds . . . . . . . . . . . . . . . . . . 337 Proportional Directional Valves . . . . . 212, 213, 214 Sandwich Valves . . . . . . . . . . . . . . . . . . . . . . . . 313 Solenoid Operated Directional Valves . . . .261, 262, 263, . . . . . . . . . . . . . . . . . . . . 264, 265, 266, 267 Stack Valves . . . . . . . . . . . . . . . 319, 320, 321, 322 Subplates . . . . . . . . . . . . . . . . . . . . . . . . . . 336, 337 D05 Parallel Valve Manifolds . . . . . . . . . . . . . . . . . . 338 Solenoid Operated Directional Valves . . . .268, 269, 270, . . . . . . . . . . . 271, 272, 273, 274, 275, 276 Stack Valves . . . . . . . . . . . . . . . . . . . . . . . 323, 324 Subplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 D08 Solenoid Operated Directional Valves . . . . . . . . 277 D10 Solenoid Operated Directional Valves . . . . . . . . 278 Daman Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 Parallel Manifolds . . . . . . . . . . . . . . . . . . . 337, 338 Subplates . . . . . . . . . . . . . . . . . . . . . . . . . . 336, 338 DC Power Units 362, 363, 364, 365, 370, 371, 372, 373 Valves 206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, . . . . . . . . . . . . . . . . . . . . . . . . . 275, 276, 277, 278 Degreaser Products, CRC . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Delta Power Flow Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . 392 Pressure Switches . . . . . . . . . . . . . . . . . . . . . . . 398 Deltrol Check Valves . . . . . . . . . . . . . . . . . . . 173, 174, 175 Flow Control Valves . . . . . . . . . . 279, 280, 281, 282 Gauge Snubbers . . . . . . . . . . . . . . . . . . . . . . . . 391 Needle Valves . . . . . . . . . . . . . . . . . . . . . . 294, 295 Denso Petrolatum Tape . . . . . . . . . . . . . . . . . . . . . . . 1227 Diaphragm
Fluid Conveying
1270
Product Index
Product Page Product Page Hydraulic Power & Control DOT Approved Air Brake Hose . . . . . . . . . . . . . . . . 739, 740, 1113 Air Brake Tube Fittings, Brass, Nylon Tubing . . 909, 910 Air Brake Tubing . . . . . . . . . . . . . . . . . . . . . . . . 873 Double Pumps, Miscellaneous . . . . . . . . . . . . . . . . 117, 118 Selector Valves . . . . . . . . . . . . . . . . . . . . . . . . . 315 Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Double Acting Piston Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 1190 Drain Cocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649 Drain Pans, Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1258 Drain Plugs, Magnetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 D-Rings, Assortment Kits . . . . . . . . . . . . . . . . . . . . . . . . 1203 Caterpillar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1185 Dry Valves, Refuse Pump System . . . . . . . . . . . . . . . . . . . . 122 Dual Pilot Operated Check Valves . . . . . . . . . . . . . . . 185 Dump Pumps, Permco . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121 Duolok Tube Fittings, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 911, 912 Stainless Steel . . . . . 895, 896, 897, 898, 899, 900 Motors, Char-Lynn 133, 134, 135, 136, 137, 138, 139, . . . . . . . . . . . . . . . . . . . . 140, 141, 142, 143 Motors, Medium Duty Piston . . . . . . . . . . . . . . . 150 Tube Fittings, Air Brake, Brass, Nylon Tubing . . 909, 910 Tube Fittings, Compression, Brass . 903, 904, 905, 906 Tube Fittings, Flareless, 7000 Series Ermeto, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 883 Tube Fittings, Push > Connect, Brass . .913, 914, 915, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 916 Tube Fittings, Push > Connect, Brass, Metric . 922, 923 Tube Fittings, Quick > Connect, Brass . .924, 925, 926 Eclipse Nylon Air Brake Tubing . . . . . . . . . . . . . . . . . . . 873 Economair Pneumatic Cylinders . . . . . . . . . . . . . . . . . 632, 633 Electrical Pressure Switches . . . . . . . . . . . . . . . 398, 399, 400 Electronic Power Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Enerpac Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . 404, 405 Gauge Adaptors . . . . . . . . . . . . . . . . . . . . . . . . 405 High Pressure Hoses . . . . . . . . . . . . . . . . . . . . . 403 ENFM Gauges . . . . . . . . . . . . . . . . . . . . . . . 388, 389, 390 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1245 EPDM Fire Resistant Hose . . . . . . . . . . . . . . . . . . 709, 711 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 709, 711 Marine Wet Exhaust Elbows . . . . . . . . . . . . . . . 731 Marine Wet Exhaust Hose . . . . . . . . . . . . . 728, 729 Marine Wet Exhaust Hump Hose . . . . . . . . . . . 730 EPHA Hose Protectors . . . . . . . . . . . . . . . . . . . . . . . . . 758 Hose Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Ermeto Flareless Tube Fittings, Steel . . . . . . . . . . . . . . 883 Everflex Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 746 Hose Fittings, Crimp, Stainless Steel . . . . 827, 828 Exhaust Elbows, Marine . . . . . . . . . . . . . . . . . . . . . . . . . 731 Hose, Marine . . . . . . . . . . . . . . . . . . . 728, 729, 730 Hump Hose, Marine . . . . . . . . . . . . . . . . . . . . . . 730 Mufflers, Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . 652 Speed Controls, Air . . . . . . . . . . . . . . . . . . 652, 653 External Spiral Retainer Rings . . . . . . . . . . . . . . . . . . . . 1200
E
Easy Couple Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 720 Eaton 420 Series Piston Pumps . . . . . . . . . . . . . . . . . 114 Air Brake Gladhands . . . . . . . . . . . . . . . . . . . . 1114 Air Brake Hose Lines . . . . . . . . . . . . . . . . . . . . 1113 Counterbalance Valves, 1CE140 . . . . . . . . . . . 196 Counterbalance Valves, 1CE20 . . . . . . . . 188, 189 Counterbalance Valves, 1CE30 . . . . . . . . 189, 190 Counterbalance Valves, 1CE300 . . . . . . . . . . . 197 Counterbalance Valves, 1SE30 . . . . . . . . . . . . . 191 Counterbalance Valves, 1SE90 . . . . . . . . . . . . . 194 Counterbalance Valves, 1SEB30 . . . . . . . . . . . 192 Directional Control Valves . . . . . . . . . . . . . . . . . 204 Gear Pumps, Series 26 . . . . . . . . . . . . . . . . . . . 104 Gear Pumps, Series L2 . . . . . . . . . . . . . . . 105, 106 Heavy Duty Hydrostatic Transmissions . . .154, 155, 156 Light Duty Hydrostatic Transmissions . . . . . . . . 152 Medium Duty Hydrostatic Transmissions . . . . . 153 Medium Duty Piston Pumps . . . . . . . . . . . 112, 113
1271
Product Index
Hydraulic Power & Control Product Page Product Page Exxon Mobil Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1245 E-Z Clip Clip Closing Tool . . . . . . . . . . . . . . . . . . . . 754, 823 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743 Hose Cutter . . . . . . . . . . . . . . . . . . . . . . . . 754, 824 Hose Fittings, Steel . 816, 817, 818, 819, 820, 821, 822, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 823, 824 Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Fire Resistant Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722, 733 Fire Resistant Fluids Hose . . . . . . . . . . . . . . . . .703, 708, 709, 711, 715 Firesleeve Flame Resistant . . . . . . . . . . . . . . . . . . . . 756, 1156 Fittings, Garden Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . 841 Numatics . . . . . . . . . . . . . . . . . . . . . . 919, 920, 921 Pipe, Brass . . . . . . . . . . . . . . . . . . . . . . . . 928, 929 Pipe, Malleable Iron . . . . . . . . . . . . . . 930, 931, 932 Pnuematic . . . . . . . . . . . . . . . . . . . . . 919, 920, 921 Power Team . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 Flame Resistant Firesleeve . . . . . . . . . . . . . . . . . . . . . . . . 756, 1156 Flange O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . 1098, 1099 Flanges, SAE 4-Bolt . . 1085, 1086, 1087, 1088, 1089, 1090, 1091, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1092 Split Flange Kits . . . . . . . . . . . . . . . . . . . . . . . . 1097 Flare Adapters, 37 Flare, Stainless Steel . . .1030, 1031, 1032 Adapters, 37 Flare, Steel 978, 979, 980, 981, 982, 983, . . . . . . . . . . . . . . . . . . . . 984, 985, 986, 987 Adapters, 45 Flare, Brass . . . . . 1049, 1050, 1051 Adapters, Braze & Weld to 37 Flare, Steel . . 1000 Adapters, BSPP to 37 Flare, Stainless . . . . . 1035 Adapters, BSPP to 37 Flare, Steel . . . .1008, 1009, 1010 Adapters, BSPT to 37 Flare, Steel . . . . . . . . . 1019 Adapters, Kobelco, Steel . . . . . . . . . . . . . . . . . 1022 Adapters, Komatsu, Steel . . . . . . . . . . . . . . . . 1022 Adapters, Metric to 37 Flare, Stainless Steel . 1034 Adapters, Metric to 37 Flare, Steel . . . .1003, 1004, 1005 Adapters, O-Ring Face Seal to 37 Flare, Steel 946 Adapters, Pipe to 37 Flare, Brass . . . . . . . . . 1044 Adapters, Pipe to 37 Flare, Stainless Steel . . 1027, 1028, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1029 Adapters, Pipe to 37 Flare, Steel . . 962, 963, 964, 965, . . . . . . . 966, 967, 968, 969, 970, 971, 972 Adapters, Pipe to 45 Flare, Brass . . . .1045, 1046, 1047, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1048 Adapters, SAE O-Ring to 37 Flare, Stainless Steel 1033 Adapters, SAE O-Ring to 37 Flare, Steel .988, 989, 990, . . . . . . . . . . . . . . . . . . . . . . . . 991, 992, 993 Adapters, SAE Split Flange to 37 Flare, Steel . 997, 998 AN Flare to Pipe Adapters, Aluminum . . . . . . . 1137
F
Pneumatic Power & Control FDA Approved Marine Water Hose . . . . . . . . . . . . . . 735, 736, 737 PVC Tubing . . . . . . . . . . . . . . . . . . . . . . . . 874, 875 Vinyl Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874 Feed Mill Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . 1238 Felsted Control Cables . . . . 1208, 1209, 1210, 1211, 1212, 1213, 1214, 1215, 1216, 1217, 1218, 1219, 1220, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1221, 1222 Female JIC Hose Fittings . .764, 765, 777, 778, 785, 790, 791, 793, 798, 800, 801, 802, 803, 806, 807, 808, 809, 810, 813, 814, 825, 827, 829, 830, 831, 833, 834, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 835 Female Pipe Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . 810, 834 Female SAE Hose Fittings . .766, 801, 802, 803, 813, 814, 833, 834 Female Straight Pipe Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 764 Female USF Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 812 Field Crimp Hose Fittings, Steel . . . . . . . . . . . . . . . . . . . . . . 790 Filler-Breathers, Power Unit . . . . . . . . . . . . . . . . . . . . . 375, 376, 377 Filter Carts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359 Filter, Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 662 Filter/Regulators, Air Line, Piggyback . . . . . . . . . . . . . . . . . . 659, 663 Filters, Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657 Hydraulic Pressure Line . . . . . . . . . . . . . . . . . . 356 Hydraulic Return Line . . . .348, 349, 350, 352, 354 Hydraulic, Suction/Return .343, 344, 345, 346, 347 Reservoir Vent . . . . . . . . . . . . . . . . . . 377, 378, 379 Suction Strainers . . . . . . . . . . . . . . . . . . . . . . . . 342 Fire Hose
Fluid Conveying
1272
Product Index
Product Page Product Page Hydraulic Power & Control Flare Nuts, 37, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . 894 37, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878 45, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 902 Inverted, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 878 Flare Sleeves, 37, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . 894 37, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878 Flareless Tube Fittings, 7000 Series Ermeto, Steel . . . . 883 Tube Fittings, Brass . . . . . . . . . . . . . . . . . . 911, 912 Tube Fittings, Stainless Steel . 895, 896, 897, 898, 899, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 Tube Fittings, Steel . . . . . . . . . . . . . . . . . . 884, 885 Flaretite Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 927 Flat Crimp Crimp Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . 798 Hose Fittings, Stainless Steel . . . . . . . . . . . . . . 826 Hose Fittings, Steel . . . . . . . . . . . . . . . . . . 798, 799 Flexible Couplings, Spider Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381 Flexmaster Pipe & Tube Joints . . . . . . . . . . . . . . . . . . 937, 938 FLOCS Oil Drain Quick Disconnects . . . . . . . . . . . . . . 1081 Flow Control Valves .279, 280, 281, 282, 283, 284, 285, 286, . . . . . . . . . . . . . . . . . . . . 287, 288, 650, 651 Control Valves, Stack (Sandwich), D03 . . . . . . . 321 Control Valves, Stack (Sandwich), D05 . . . . . . . 324 Divider Valves . . . . . . . . . . . . . . . . . . 290, 291, 292 Dividers, Geared Type . . . . . . . . . . . . . . . . 392, 393 Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Flow Ezy Breathers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375 Filler-Breathers . . . . . . . . . . . . . . . . . . . . . . . . . 376 Suction Strainers . . . . . . . . . . . . . . . . . . . . . . . . 342 Fluid Analysis Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Fluid Power Textbooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Fluid, Air Line Lubricating Oil . . . . . . . . . . . . . . . . . . . 667 Automatic Transmission . . . . . . . . . . . . . . . . . 1243 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1245 Hydraulic . . . . . . . . . . . . . . . . . . . 1239, 1240, 1241 Power Team Hydraulic Oil . . . . . . . . . . . . . . . . . 423 Tractor Transmission/Hydraulic . . . . . . . . . . . . 1241 Food Grade Silicone Lubricants . . . . . . . . . . . . . . . . . . . . . 1246 Foot Brackets, Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Foot Valves, Water Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Force Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Forklift Sheave Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 714 Freezer Hydraulic Hose . . . . . . . . . . . . . . . . . . . . . . . . . 714 Freon Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743 FRL FlexiBlok . . . . . . . . . . . . . . . . . . 661, 662, 663, 664 FRL's, Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 Lubricating Fluid . . . . . . . . . . . . . . . . . . . . . . . . 667 Fuel Blocks, Aluminum . . . . . . . . . . . . . . . . . . . . . . 1147 Fill Hose, Marine . . . . . . . . . . . . . . . . . . . . . . . . 733 Hose 703, 704, 713, 715, 721, 722, 733, 738, 739, . . . . . . . . . . . . . . . . .740, 1116, 1117, 1118, 1119 Hose, Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 In-Line Fuel Pressure Adapters, Aluminum . . . 1147 Fuel Dispensing Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722 Fuel Line Truck Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Fuel Pump, Adapters, Aluminum . . . . . . . . . . . . . . . . . . . . 1146 Fuel Tank Vent Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 738 Fulflo Relief Valves, V Series Threaded . . . . . . . . . . . 312 Full Couplings, SAE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 939 Funnels Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1257
G
Garbage Truck Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Garden Hose Adapters, Brass . . . . . . . . . . . . . . . . . . . . . . . . 1056 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 841 Gasoline Engine Pump Mounts . . . . . . . . . . . . . . . . . . . . 382 Hose . . . 699, 700, 703, 721, 722, 739, 740, 1117 Selector Valves . . . . . . . . . . . . . . . . . . . . . 298, 299 Gate Valves, Bronze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293 Gates Hose Bend Restrictors . . . . . . . . . . . . . . . . . . . . 757 Gauge
1273
Product Index
Hydraulic Power & Control Product Page Product Page Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Snubbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Gauges, Air Line FRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 Air Line Piggyback Filter/Regulators . . . . . . . . . 659 Air Line Regulators . . . . . . . . . . . . . . . . . . . . . . 658 Force & Pressure . . . . . . . . . . . . . . . . . . . . . . . . 422 Pressure & Vacuum . . . . . . . . . . . . . . 388, 389, 390 Gear Dump Pumps, To 38 GPM @ 1800 RPM . 120, 121 Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147, 148 Pumps, Double, Miscellaneous . . . . . . . . . . . . . 118 Pumps, Single . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Pumps, Single, To 13 GPM @ 1800 RPM . . . . 101 Pumps, Single, To 19 GPM @ 1800 RPM . . . . 103 Pumps, Single, To 22 GPM @ 1800 RPM . . . . 102 Pumps, Single, To 24 GPM @ 1800 RPM . . . . 104 Pumps, Single, To 26 GPM @ 1800 RPM 105, 106 Pumps, Single, To 46 GPM @ 1800 RPM . . . . 106 Gear Lube, Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . 1244 Geared Flow Dividers . . . . . . . . . . . . . . . . . . . . . . . 392, 393 Georgia Hydraulic Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Geroler Motors, To 14920 lb-in Torque . . . . . . . . . . . . . 142 Motors, To 23910 lb-in Torque . . . . . . . . . . . . . 143 Motors, To 4550 lb-in Torque . . . . . . . . . . 136, 137 Motors, To 7980 lb-in Torque . . . . . . . . . . 139, 140 Motors, To 8600 lb-in Torque . . . . . . . . . . . . . . 141 Geroter Motors, To 4600 lb-in Torque . . . . . . . . . . 133, 134 Gladhands, Air Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1114 Glass Filled PTFE Piston Seals . . . . . . . . . . . . . . . . . 1186, 1187, 1188 Global Skive Crimp Fittings, Steel . . . . . . . . . . . . . . . . . . . . . 791 Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791 Gloves, Anti-Vibration, Latex, Leather, Cotton . . . . . . . 1231 Goodway Hose/Tube Cleaning Guns & Projectiles . . . . . 1093 Projectiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1093 Gooseneck Air Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Grease Gun, 12Volt Cordless . . . . . . . . . . . . . . . . . . . 1250 Guns & Accessories 1249, 1250, 1251, 1252, 1253, . . . . . . . . . . . . . . . .1254, 1255, 1256, 1257, 1258 Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234 Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1251 Grease Fitting Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1250 Grease Gun Whip Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . 1251 Grease Guns, Pistol Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1249 Grease, Di-Electric . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1247 Lithium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1248 Greases, CRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1248 Guided Piston Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 Guns, Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . 1236
H
H2O-Gate Reservoir Vent Filters . . . . . . . . . . . . . . . . . . . . 379 Haldex Barnes DC Motor & Pump Assemblies . . . . . . . . . . . . . 373 Flow Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 GC8000 & GC8001 Series DC Power Units . . . 362, 363, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364, 365 GC9000 Series AC Power Units . . . . . . . . . . . . 368 Gear Pumps, W900 Series . . . . . . . . . . . . . . . . 101 HE2000 Series Power Units . . . . . . . 370, 371, 372 Half Couplings, SAE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 939 Hand Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1248 Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125 Hand Cleaner Towels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1229 Hand Pumps, Hydraulic . . . . . . . . . . . . . . . . . . . . . . 412, 413, 414 Hannay Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234 HDM Hydraulics Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Head & Holding Tank Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735 Heat Exchangers, Air & Water Cooled . . . . . . . . . . 394, 395, 396, 397 Heater Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741 Hedland Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Heil Cylinder Repair Kits . . . . . . . . . . . . . . . . . . . . . 1206
Fluid Conveying
1274
Product Index
Product Page Product Page Hydraulic Power & Control Helland Overhung Load Adaptors . . . . . . . . . . . . . . . . . 151 High Performance Products See Performance Products . . . 86, 87, 1116, 1117, 1118, 1119, 1120, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1128, 1129, 1130, 1131, 1132, 1133, 1134, 1135, 1136, 1137, 1138, 1139, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149, 1150, 1151, 1152, 1153, 1154, 1155, 1156, 1157, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1158 High Pressure Hydraulic Hoses . . . . . . . . . . . . . . . . . . . . 403, 421 High Tonnage Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427 Hose Adapters, Pipe to Hose, Steel . . . . . . . . . . . . . . 977 Adapters, SAE O-Ring to Hose, Steel . . . . . . . . 996 Clamps, PRO CLAMP Aluminum Hose Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1154 Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824, 1158 Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Protection . . . . . . . . 755, 756, 757, 758, 759, 760 Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234 Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234 Support Clamps . . . . . . . . . . . . . . . . . . . . . . . . 1100 Hose Assemblies, Air Coiled Hose . . . . . . . . . . . . . . . . . . . . . . . . . 667 Air Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 666 Contractor's Air Hose . . . . . . . . . . . . . . . . . . . . . 750 Hydraulic . . . . . . . . . . . . . . . . . . . . . . 747, 748, 749 Water Discharge . . . . . . . . . . . . . . . . . . . . . . . . 751 Water Suction & Discharge . . . . . . . . . . . . . . . . 750 Hose Assembly Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 753, 754 Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 752, 1157 Mandrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 752 Hose Barbs, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846 Brass . . . . . . . . . . . . . . . . . . . . . . . . . 839, 840, 841 Metric Banjo . . . . . . . . . . . . . . . . . . . . . . . . . . . 1148 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 845 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843, 844 Hose Bundling Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757, 759 Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 759, 760 Hose Clamps, Band-It Preformed . . . . . . . . . . . . . . . . . . . . . . 864 Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 865 Dixon F Series Preformed Center Punch . . . . . 865 Double Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . 866 Oetiker 2-Ear Pinch . . . . . . . . . . . . . . . . . . . . . . 856 Oetiker Stepless Ear Pinch Clamps . . . . . . . . 857 Oetiker Stepless Spring Clamps . . . . . . . . . . . 861 Spiral Double Bolt . . . . . . . . . . . . . . . . . . . . . . . 866 T-Bolt . . . . . . . . . . . . . . . . . . . . . . . . . 859, 860, 862 Trident Marine Constant-Torque Clamps . . . . 863 Worm Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 855 Hose Cleaning System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1093 Hose Ferrules, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 867 Hose Fittings, AQP High Pressure Hose . . . . . . . . . . . . . . . 1130 AQP Racing Hose . . . . . . . . . . . . . . . . . . . . . 1120 Assembly Mandrels . . . . . . . . . . . . . . . . . . . . . . 752 Ball Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 814 Banjo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 814 BSPP . . . . . . . . . . . . . . . . .771, 772, 782, 789, 805 Bump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . 805 Caterpillar . . . . . . . . . . . . . . . . . . . . . . . . . 786, 787 Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . 836 Crimp, Stainless Steel, Aeroquip . . . . . . 825, 826 Crimp, Stainless Steel, Everflex . . . . . . . 827, 828 DIN 3902 . . . . . . . . . . . . . . . . . . 773, 774, 775, 783 E-Z Clip, Steel 816, 817, 818, 819, 820, 821, 822, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 823, 824 FBF A/C Hose . . . . . . . . . . . . . . . . . . . . . . . . . 1127 Female JIC 764, 765, 777, 778, 785, 790, 791, 793, 798, 800, 801, 802, 803, 806, 807, 808, 809, 810, 813, 814, 825, 827, 829, 830, 831, 833, 834, 835 Female Pipe . . . . . . . . . . . . . . . . . . . . . . . 810, 834 Female SAE 766, 801, 802, 803, 813, 814, 833, 834 Female Straight Pipe . . . . . . . . . . . . . . . . . . . . . 764 Female USF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 812 Field Crimp, Steel . . . . . . . . . . . . . . . . . . . . . . . 790 Flat Crimp, Stainless Steel . . . . . . . . . . . . . . . . 826 Flat Crimp, Steel . . . . . . . . . . . . . . . . . . . . 798, 799 Global Skive, Steel . . . . . . . . . . . . . . . . . . . . . . 791 Hose Mender . . . . . . . . . . . . . . . . . . . . . . . . . . . 835 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761 Inverted Flare .769, 803, 804, 810, 815, 827, 828, 835 JIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 775 Komatsu . . . . . . . . . . . . . . . . . . . . . . . . . . 776, 784 Lifesaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802 Male JIC . . . . . . . . . . . . . . . . . . . . . . 766, 778, 802 Male Pipe 763, 777, 790, 793, 798, 800, 808, 810, 812, . . . . . . . . . . . . . . . .813, 827, 829, 833, 834 Male SAE . . . . . . . . . . . . . . . . . . . . . . . . . . 802, 835 Marine Steering, Crimp, Brass . . . . . . . . . . . . . . 832 Marine Steering, Reusable, Brass . . . . . . . . . . . 837 Matchmate TTC, Steel . 763, 764, 765, 766, 767, 768, . . . 769, 770, 771, 772, 773, 774, 775, 776 Matchmate TTC12, Steel 777, 778, 779, 780, 781, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 782, 783, 784
1275
Product Index
Hydraulic Power & Control Product Page Product Page Metric Banjo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 775 O-Ring Boss . . . . . . . . . . . . . . . . . . . 766, 767, 778 ORS 767, 768, 769, 779, 780, 788, 804, 805, 811 OTC, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 792 Polyon Crimp, Brass . . . . . . . . . . . . . . . . . . . 831 Polyon Swage, Steel . . . . . . . . . . . . . . . . . . . 793 Reusable, 1 Wire Braid, Full Bore, Brass . . . . . 833 Reusable, 1 Wire Braid, Full Bore, Steel . . . . . . 806 Reusable, 1 Wire Braid, Reduced Bore, Steel . 800, 801, . . . . . . . . . . . . . . . . . . . . 802, 803, 804, 805 Reusable, 2 Wire Braid, Skive, Steel . . . . . . . . . 807 Reusable, 2 Wire Braid, Thru-The-Cover, Steel 808 Reusable, Air Brake, Steel . . . . . . . . . . . . . . . . 812 Reusable, Polyon, Steel . . . . . . . . . . . . . . . . . 809 Reusable, SOCKETLESS, Brass . . 834, 835, 836 Reusable, SOCKETLESS, Steel . . . . . . 810, 811 Reusable, Stainless Steel . . . . . . . . . . . . . . . . . 829 Reusable, Teflon 1 Braid, Stainless Steel . . . . 830 Reusable, Teflon 1 Braid, Steel . . . 813, 814, 815 SOCKETLESS . . . . . . . . . . . . . . . . . . . . . . . 1124 Spiral TTC . . . . . . . . . . . . .785, 786, 787, 788, 789 Split Flange 770, 780, 781, 782, 785, 786, 788, 803 Standpipe Straight Tube . . . . . . . . . . . . . . . . . . 772 Synflex Swage, Steel . . . . . . . 794, 795, 796, 797 Teflon Racing Hose . . . . . . . . . . . . . . . . . . . 1128 Hose Mender Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 835 Hose Menders, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 844 Hose Protectors, Bend Restrictors . . . . . . . . . . . . . . . . . . . . . . . . 757 EPHA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Hose, 1 Wire Braid . . . . . . . . . . . .701, 702, 703, 704, 705 2 Wire Braid . . . . . . . 705, 706, 707, 708, 709, 743 Aeroquip 699, 700, 701, 702, 703, 704, 705, 706, 707, 708, 709, 710, 711, 712, 713, 714, 715, 716 Agency Listings . . . . . . . . . . . . . . . . . . . . . . . . 1387 Air . . . . . . . . . 718, 719, 721, 722, 739, 740, 1117 Air & Multi-Purpose . . . . . . . . . . . . . . . . . . 717, 720 Air Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 739, 740 Air Brake Lines . . . . . . . . . . . . . . . . . . . . . . . . 1113 Air Conditioning . . . . . . . . . . . . . . . . . . . . . 743, 744 Air Tool Hose Assemblies . . . . . . . . . 666, 667, 668 AQP . . 699, 700, 703, 708, 721, 733, 739, 740, 1117 AQP Racing Hose . . . . . . 1116, 1117, 1118, 1119 Aviation Ground Support . . . . . . . . . . . . . . . . . . 709 Butane Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742 CO2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715 Compressor Discharge . . . . . . . . . . . 744, 745, 746 Coolant . . . . . . . . . . . . . . . 1116, 1117, 1118, 1119 Crimp 699, 700, 701, 702, 705, 706, 707, 708, 709, . . . . . . . . . . . . . . . . . . . . . . . . . 710, 711, 712, 743 Easy Couple . . . . . . . . . . . . . . . . . . . . . . . . . . 720 EPDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 709, 711 Fire Resistant . . . . . . . . . . . . . . . . . . . . . . . 722, 733 Fire Resistant Fluid . . . . . . . . . . . . . . . . . . . . . . 711 Fire Resistant Fluids . . . . . . . . . 703, 708, 709, 715 Forklift Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . 714 Freon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743 Fuel 703, 704, 713, 715, 721, 722, 733, 739, 740, 1116, . . . . . . . . . . . . . . . . . . . . 1117, 1118, 1119 Fuel Dispensing . . . . . . . . . . . . . . . . . . . . . . . . . 722 Fuel Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 738 Fuel Tank Vent . . . . . . . . . . . . . . . . . . . . . . . . . 738 Gasoline 699, 700, 703, 721, 722, 739, 740, 1117 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741 High Force Hydraulic . . . . . . . . . . . . . . . . . 403, 421 Hot Air . . . . . . . . . . . . . . . . . . . . . . . . 744, 745, 746 Hydraulic 699, 700, 701, 702, 703, 704, 705, 706, 707, 708, 709, 710, 711, 712, 713, 714, 715, 716 Hydraulic Hose Assemblies . . . . . . . . 747, 748, 749 Hydraulic, Freezer . . . . . . . . . . . . . . . . . . . . . . . 714 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 698 Industrial 717, 718, 719, 720, 721, 722, 723, 724, 725, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 726 Internal Support Coil . . . . . . . . . . . . . . . . . . . . . 758 Jack Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743 L.P. Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742 Lay Flat Water Discharge . . . . . . . . . . . . . . . . . 724 Layflat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 725 Lube Oil . 703, 704, 713, 714, 715, 721, 722, 733, 739, . . . . . . . . . . . .740, 1116, 1117, 1118, 1119 Marathoner . . . . . . . . . . . . . . . . . . . . . . . . . . . 718 Marine . . . . . . . . . . . 732, 733, 734, 735, 736, 737 Marine Bilge, Drain & Live Well . . . . . . . . . . . . . 734 Marine Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 Marine Fuel Fill . . . . . . . . . . . . . . . . . . . . . . . . . 733 Marine Power Trim . . . . . . . . . . . . . . . . . . . . . . 746 Marine Sanitation . . . . . . . . . . . . . . . . . . . . . . . . 735 Marine Steering . . . . . . . . . . . . . . . . . . . . . . . . . 737 Marine Water . . . . . . . . . . . . . . . . . . . . . . . 736, 737 Marine Wet Exhaust . . . . . . . . . . . . . 728, 729, 730 Marine, Wet Exhaust . . . . .727, 728, 729, 730, 731 Matchmate . .701, 702, 705, 706, 707, 708, 709, 710 Mud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Multi-Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 716 Nitrogen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715 Nonconductive . . . . . . . . . . . . . . . . . . . . . . . . . . 713 Offroad Brake . . . . . . . . . . . . . . . . . . . . . . . . . 1118 Petroleum Dispensing . . . . . . . . . . . . . . . . . . . . 722 Petroleum Transfer . . . . . . . . . . . . . . . . . . . . . . 723 Phosphate Ester . . . . . . . . . . . . . . . . . . . . 709, 711 Polyon . . . . . . . . . . . . . . . . . . . . . . . . . . 713, 715
Fluid Conveying
1276
Product Index
Product Page Product Page Hydraulic Power & Control Power Trim Lines . . . . . . . . . . . . . . . . . . . . . . . . 746 Pressure Washer . . . . . . . . . . . . . . . . . . 1235, 1236 Propane Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . 742 Refrigerant 134a . . . . . . . . . . . . . . . . . . . . . . . . 744 Refrigeration . . . . . . . . . . . . . . . . . . . . . . . 743, 744 SAE 100R18 . . . . . . . . . . . . . . . . . . . . . . . . . . . 714 SAE 100R7 . . . . . . . . . . . . . . . . . . . . . . . . 712, 714 SAE 100R8 . . . . . . . . . . . . . . . . . . . . . . . . 715, 716 SAE J517 Non-Conductive . . . . . . . . . . . . . . . . 713 Silicone Rubber . . . . . . . . . . . . . . . . . . . . . . . . . 741 Skydrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . 709, 711 SOCKETLESS . . . . . . . . . . . . . . . 721, 722, 1117 Special Application . 738, 739, 740, 741, 742, 743, 744, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 745, 746 Spiral Wire Reinforced . . . . . . . . 709, 710, 711, 712 StartLite Racing Hose . . . 1116, 1117, 1118, 1119 Steam . . . . . . . . . . . . . . . . . . . . . . . . 744, 745, 746 Suction . . . . . . . . . . . . . . . . . . . . . . . . 699, 700, 723 Sunrise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719 Super-Vac . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Swage . . . . . . . . . . . . . . . .712, 713, 714, 715, 716 Tank Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Teflon . . . . . . . . . . . . . . . . . . 744, 745, 746, 1118 Thermoplastic . . . . . . . . . .712, 713, 714, 715, 716 Tigerflex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 726 Transfer . . . . . . . . . . . . . . . . . . . . . . . 699, 700, 723 Twin-Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 716 Ultraforce . . . . . . . . . . . . . . . . . . . . . . . . . . . . 717 Water . . . . . . . 717, 720, 721, 722, 723, 733, 1117 Water Discharge . . . . . . . . . . . . . . . . . . . . 724, 726 Water Discharge Assemblies . . . . . . . . . . . . . . 751 Water Suction . . . . . . . . . . . . . . . . . . . . . . . . . . 726 Water Suction & Discharge . . . . . . . . . . . . . . . . 726 Water Suction & Discharge Assemblies . . . . . . 750 Water, Marine . . . . . . . . . . . . . . . . . . . . . . . . . . 736 X-FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710 Hot Air Hose . . . . . . . . . . . . . . . . . . . . . . . . . 744, 745, 746 Housings, Vickers Valve . . . . . . . . . . . . . . . . . . . 329, 330, 331 Houston Vibrator BV Series Piston Vibrators . . . . . . . . . . . . . . . 1232 HSC Sunrise Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . 719 HTMA Quick Disconnects . . . . . . . . . . . . . . . . . 1076, 1077 Hub City Precision Splined Hubs . . . . . . . . . . . . . . . . . . 1230 Hubs, Splined . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Hump Hose, Marine Wet Exhaust . . . . . . . . . . . . . . . . . . . . . 730 Husco Model 5000 Sectional Valves . . . . . . . . . . 219, 220 Model 6000 Sectional Valves . . . . . . . . . . 229, 230 Hyco Telescopic Cylinder Parts . . . . . . . . . . . . . . . . 1206 Hydraulic Control Valves .202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, . . . . . . . . . . . . . . . . 232, 233, 234, 235, 236, 237 Cylinders, Custom . . . . . . . . . . . . . . . . . . . 160, 161 Cylinders, High Force . . . .406, 407, 408, 409, 410 Cylinders, Tie Rod . . . . . . . . . . . 157, 158, 159, 160 Cylinders, Welded . . . . . . . . . . . . . . . . . . . 160, 161 Filters, Suction/Return . . . .343, 344, 345, 346, 347 Flow Control Valves . 279, 280, 281, 282, 283, 286 Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Fluid . . . . . . . . . . . . . . . . . . 1239, 1240, 1241, 1242 Fluid Analysis Kits . . . . . . . . . . . . . . . . . . . . . . . 360 Hand Pumps . . . . . . . . . . . . . . . . . . . 412, 413, 414 Hose 699, 700, 701, 702, 703, 704, 705, 706, 707, 708, 709, 710, 711, 712, 713, 714, 715, 716, 720 Hose Assemblies . . . . . . . . . . . . . . . . 747, 748, 749 Lock Valves . . . . . . . 181, 182, 183, 184, 185, 186 Motors, Eaton Medium Duty . . . . . . . . . . . . . . . 150 Motors, Gear . . . . . . . . . . . . . . . 144, 145, 146, 147 Motors, Geroler, To 14920 lb-in Torque . . . . . 142 Motors, Geroler, To 23910 lb-in Torque . . . . . 143 Motors, Geroler, To 4550 lb-in Torque . . 136, 137 Motors, Geroler, To 7980 lb-in Torque . . 139, 140 Motors, Geroler, To 8600 lb-in Torque . . . . . . 141 Motors, Geroter, To 4600 lb-in Torque . . . 133, 134 Motors, Index . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Motors, Vane, To 2875 lb-in Torque . . . . . . . . . 149 Needle Valves . . . . . . . . . . . . . . 294, 295, 296, 297 Oil, Power Team . . . . . . . . . . . . . . . . . . . . . . . . 423 Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . 1238 Pressure Line Filters . . . . . . . . . . . . . . . . . . . . . 356 Proportional Directional Valves . . . . . 212, 213, 214 Pullers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436, 437 Pumps, Air Driven . . . . . . . . . . . . . . . . . . . . . . . 415 Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430 Quick Disconnects . 1071, 1072, 1073, 1074, 1075, 1076, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1077 Quick Disconnects, Fluid Transfer & Hydraulic 1066, . . . . . . . . . . . . . . . .1067, 1068, 1069, 1070, 1152 Quick Disconnects, Fluid Transfer & Refrigerant . . . 1078 Quick Disconnects, Hydraulic Farm . . . . . . . . . 1079 Return Line Filters . . . . . . .348, 349, 350, 352, 354 Selector Valves . . . . . . . . . . . . . 314, 315, 316, 317 Shuttle Valves . . . . . . . . . . . . . . . . . . . . . . 325, 326 Solenoid Operated Directional Valves . . . .261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272,
1277
Product Index
Hydraulic Power & Control Product Page Product Page . . . . . . . . . . . . . . . . 273, 274, 275, 276, 277, 278 Solenoid Operated Valves, 2-way . . 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 Solenoid Operated Valves, 3-way . . 252, 253, 254, 255 Solenoid Operated Valves, 4-way . . 256, 257, 258, 259, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 Steering Units, Columns, Wheels . . . 162, 163, 164 Suction Hose . . . . . . . . . . . . . . . . . . . 699, 700, 723 Suction Strainers . . . . . . . . . . . . . . . . . . . . . . . . 342 Torque Wrenches . . . . . . . . . . . . . . . . . . . 428, 429 Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1237 Hydraulic Tool Quick Disconnects . . . . . . . . . . . . . . . . . 1076, 1077 Hydrazorb Pipe & Tubing Support Clamps . . . . . . . . . . . . 1101 Hydreco Gear Pumps, 1500K Series . . . . . . . . . . . . . . . . 102 Gear Pumps, 1500M Series . . . . . . . . . . . . . . . 103 Motors, 1500K Series . . . . . . . . . . . . . . . . . . . . 145 Motors, 1500M Series . . . . . . . . . . . . . . . . . . . . 146 Hydrostatic Transmission Selector Valves . . . . . . . . . . . . . . . . . . . . . . . . . 316 Hydrostatic Transmissions, Heavy Duty . . . . . . . . . . . . . . . . . . . . 154, 155, 156 Light Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Medium Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Hygroscopic Reservoir Filler Breathers . . . . . . . . . . . . . . . . . 377 Hypro Centrifugal Pumps . . . . . . . . . . . . . . . . . . . 128, 129 Counterbalance Valves, 1CE30 . . . . . . . . . 189, 190 Counterbalance Valves, 1CE300 . . . . . . . . . . . . 197 Counterbalance Valves, 1SE30 . . . . . . . . . . . . . 191 Counterbalance Valves, 1SE90 . . . . . . . . . . . . . 194 Counterbalance Valves, 1SEB30 . . . . . . . . . . . 192 Dual Relief Valves, 1CLLR100 . . . . . . . . . . . . . 201 Dual Relief Valves, 1CLLR50 . . . . . . . . . . . . . . 198 Hand Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Pilot Operated Check Valves, 4CKKT50 . . . . . . 185 Integrated Motor Pump Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Internal Support Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Inverted Flare Adapters, 42 Inverted Flare to 37 Flare, Steel 1001 Adapters, 42 Inverted Flare to Pipe, Brass . . 1053, 1054 Adapters, 45 Inverted Flare to 45 Flare, Brass . . . 1052 Adapters, Inverted Flare Unions & Accessories, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1055 Brake Adapters . . . . . . . . . . . . . . . . . . . . . . . . 1143 Hose Fittings . .769, 803, 804, 810, 815, 827, 828, 835 Nuts, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878 ISO 4400 Solenoid Valve Connectors . . . . . . . . 333, 334, 410 ISO 7368 Slip-In Cartridge Valves . . . . . . . . . . . . . . . . . . . 318
Fluid Conveying
J
Jack Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743 Jacks, High Tonnage . . . . . . . . . . . . . . . . . . . . . . . . . . 427 Post Tension & Stressing . . . . . . . . . . . . . . . . . 426 Jaw Pullers, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 JIS Adapters, 30 Seat (BSPP Thread) To 37 Flare, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1021 Adapters, Steel . . . . . . . . . . . . . . . . . . . . . . . . 1020 Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 775
I
Industrial Hose 717, 718, 719, 720, 721, 722, 723, 724, 725, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 726 Injector Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1248 Inlet Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Inline Check Valves . . . . . . . . . . .173, 174, 175, 176, 177 Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Lock Valves . . . . . . . 181, 182, 183, 184, 185, 186 Pneumatic Flow Control Valves . . . . . . . . . . . . . 651 Valves, Power Team . . . . . . . . . . . . . . . . . . . . . 425 In-Tank Hydraulic Return Line Filters . . . . . . . . . . . 352, 354 Integrated Hydraulics Counterbalance Valves, 1CE140 . . . . . . . . . . . 196 Counterbalance Valves, 1CE20 . . . . . . . . 188, 189
K
King Combination Nipples, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843 King Nipples, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 842 Kits, Back-Up Ring Assortment Kits . . . . . . . 1204, 1205 D-Ring Assortment Kits . . . . . . . . . . . . . . . . . . 1203
1278
Product Index
Product Page Product Page Hydraulic Power & Control Oetiker 2-Ear Pinch Clamp Kits . . . . . . . . . . . . . 857 Oetiker Stepless Ear Pinch Clamp Kits . . . . . . 858 O-Ring Assortment Kits . . . . . . . . 1202, 1203, 1204 O-Ring Splice Kits . . . . . . . . . . . . . . . . . . . . . . 1204 Quad Ring Assortment Kits . . . . . . . . . . . . . . . 1202 Kobelco Adapters, Steel . . . . . . . . . . . . . . . . . . . . . . . . 1022 Koenig Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1237 Komatsu Adapters, Steel . . . . . . . . . . . . . . . . . . . . . . . . 1022 Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . 776, 784 Kuriyama Air Tool Hose Assemblies . . . . . . . . . . . . . . . . . 666 Cam & Groove Couplers & Adapters . 847, 848, 849 Tigerflex Series JG Hose . . . . . . . . . . . . . . . . 726 Sight Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Lube Oil Hose 703, 704, 713, 714, 715, 721, 722, 733, 739, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 740, 1117 Lube, Hose Assembly . . . . . . . . . . . . . . . . . . . . 752, 1157 Lubricants, Automatic Transmission . . . . . . . . . . . . . . . . . 1243 Boeshield T-9 . . . . . . . . . . . . . . . . . . . . . . . . 1228 CRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246, 1247 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1245 Gear Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1244 Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1251 Hydraulic Fluid . . . . . . . . . . 1239, 1240, 1241, 1242 Tractor Transmission . . . . . . . . . . . . . . . . . . . . 1242 Lubricating Oil, Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667 Lubrication Supplies & Accessories . . 1249, 1250, 1251, 1252, 1253, . . . . . . . . . .1254, 1255, 1256, 1257, 1258 Lubricator Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667 Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 658, 663 Lubricators, Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . 658, 663 Lumax Barrel Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . 1257 Bucket Pumps . . . . . . . . . . . . . . . . . . . . 1256, 1257 Drain Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1258 Funnels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1257 Grease Guns . . . . . . . . . . . . . . . . . . . . . . . . . . 1249
L
L.P. Gas Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742 Lances, Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . 1236 Lantec Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . 1238 Lay Flat Water Discharge Hose . . . . . . . . . . . . . . . . . . . 724 Layflat Water Discharge Hose Assemblies . . . . . . . . . . 751 Level Sight Glasses . . . . . . . . . . . . . . . . . . . . . . 383, 384 Lever Operated Pneumatic Valves . . . . . . . . . . . . . . . 639, 640, 641 Lifesaver Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 802 Liquid Teflon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1223 Liquid Filled Gauges . . . . . . . . . . . . . . . . . . . . . . . 388, 389, 390 Lithium Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Live Well Hose, Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . 734 Load Sense Piston Pumps . . . . . 109, 110, 111, 112, 113, 114 Lock Valves, InLine . . . . . . . . . . . . 181, 182, 183, 184, 185, 186 Log Splitter Directional Control Valves . . . . . . . . . . . . . . . . . 210 Low Profile High Force Cylinders . . . . . . . . . . . . . . . . . . . . . 407 Lube Devices Sight Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . 383
M
Magnaloy Filler-Breathers . . . . . . . . . . . . . . . . . . . . . . . . . 376 Pressure Switches . . . . . . . . . . . . . . . . . . . . . . . 400 Pump/Motor Mounts . . . . . . . . . . . . . . . . . . . . . 382 Magnetic Drain Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Male JIC Hose Fittings . . . . . . . . . . . . . . . . . . . 766, 778, 802 Male Pipe Hose Fittings . .763, 777, 790, 793, 798, 800, 808, 810, . . . . . . . . . . . 812, 813, 827, 829, 833, 834 Male SAE Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . 802, 835 Malleable Iron Pipe Fittings . . . . . . . . . . . . . . . . . . . . 930, 931, 932 Mandrels, Hose Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 752 Manifolds, NFPA D03 Parallel . . . . . . . . . . . . . . . . . . . . . . . 337
1279
Product Index
Hydraulic Power & Control Product Page Product Page NFPA D05 Parallel . . . . . . . . . . . . . . . . . . . . . . 338 Power Team . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 Manual Directional Control Valves 202, 203, 204, 209, 210, 211 Pneumatic Valves . . . . . . . . . . . 638, 639, 640, 641 Selector Valves . . . . . . . . . . . . . . . . . 314, 315, 316 Marathoner Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 718 Marine Bilge, Drain & Live Well Hose . . . . . . . . . . . . . . 734 Boeshield T-9 Corrosion Shield . . . . . . . . . . 1228 Corrosion Protection Tape . . . . . . . . . . . . . . . . 1227 Fuel Fill Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . 733 Fuel Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1248 Grease Fittings . . . . . . . . . . . . . . . . . . . . . . . . 1253 Hose 727, 728, 729, 730, 731, 732, 733, 734, 735, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 736, 737 Power Trim Hose . . . . . . . . . . . . . . . . . . . . . . . . 746 Sanitation Hose . . . . . . . . . . . . . . . . . . . . . . . . . 735 Steering Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 737 Water Hose . . . . . . . . . . . . . . . . . . . . . . . . 736, 737 Wet Exhaust Elbows . . . . . . . . . . . . . . . . . . . . . 731 Wet Exhaust Hose . . . . . . . . . . . . . . . 728, 729, 730 Wet Exhaust Hump Hose . . . . . . . . . . . . . . . . . 730 Marine Steering Crimp Fittings, Brass . . . . . . . . . . . . . . . . . . . . . 832 Reusable Fittings, Brass . . . . . . . . . . . . . . . . . . 837 Marsh Needle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 296 Matchmate Hose . . . . 701, 702, 705, 706, 707, 708, 709, 710 Hose Fittings, Steel, TTC 763, 764, 765, 766, 767, 768, . . . 769, 770, 771, 772, 773, 774, 775, 776 Hose Fittings, Steel, TTC12 . . 777, 778, 779, 780, 781, . . . . . . . . . . . . . . . . . . . . . . . . 782, 783, 784 Mazzer Polyethylene Tubing . . . . . . . . . . . . . . . . . . . . . 872 Mechanical Jaw Pullers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 Push-Pullers . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Metal Clad Rubber Wiper Rings . . . . . . . . . . . . . . . . . . . . 1183 Urethane Wiper Rings . . . . . . . . . . . . . . 1183, 1184 Meters, Flow Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Metric Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1139 Adapters, BSPP to Metric, Steel . . . . . . . . . . . 1012 Adapters, Metric to 37 Flare, Stainless Steel . 1034 Adapters, Metric to 37 Flare, Steel . . . .1003, 1004, 1005 Adapters, Metric to Pipe, Steel . . . . . . . . . . . . 1006 Adapters, Steel . . . . . . . . . . . . . . . . . . . . . . . . 1007 Banjo Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . 1148 Banjo Brake Adapters . . . . . . . . . . . . . . . . . . . 1144 Banjo Hose Barbs . . . . . . . . . . . . . . . . . . . . . . 1148 Bonded Seals . . . . . . . . . . . . . . . . . . . . . . . . . 1094 Brake Adapters . . . . . . . . . . . . . . . . . . . . . . . . 1144 Copper Washers . . . . . . . . . . . . . . . . . . . . . . . 1094 Flareless Tube Fittings, Stainless Steel . . . . . . . 901 O-Ring Assortment Kits . . . . . . . . . . . . . 1203, 1204 O-Ring Splice Kits . . . . . . . . . . . . . . . . . . . . . . 1204 Tube Fittings, Brass, Push > Connect . . 922, 923 Urethane U-Seals . . . . . . . . . . . . . . . . . . . . . . 1201 Metric Banjo Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 775 Midway Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Milton Quick Disconnects, Air . . . . 1059, 1062, 1064, 1065 Mini Solenoid Valve Connectors . . . . . . . . . . . . . . . . 335 Mobil Oil Automatic Transmission Fluid . . . . . . . . . . . . . 1243 Heavy Duty Gear Lube . . . . . . . . . . . . . . . . . . 1244 Hydraulic Fluid . . . . . . . . . . . . . . . 1239, 1240, 1241 Tractor Transmission/Hydraulic Fluid . . . . . . . 1242 Mobile Gate Reservoir Filler Breathers . . . . . . . . . . . . . . . . . 377 Modulator, Pneumatic Transmission . . . . . . . . . . . . . . . . . . 670 Monarch Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . 157, 158 Motors, Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Hydraulic, Eaton Medium Duty . . . . . . . . . . . . . 150 Hydraulic, Gear . . . . . . . . . . . . . 144, 145, 146, 147 Hydraulic, Geroler, To 14920 lb-in Torque . . . 142 Hydraulic, Geroler, To 23910 lb-in Torque . . . 143 Hydraulic, Geroler, To 4550 lb-in Torque 136, 137 Hydraulic, Geroler, To 7980 lb-in Torque 139, 140 Hydraulic, Geroler, To 8600 lb-in Torque . . . . 141 Hydraulic, Geroter, To 4600 lb-in Torque . 133, 134 Hydraulic, Vane, To 2875 lb-in Torque . . . . . . . 149 Hydrostatic Transmission . . . . . . . . . . . . . . . . . 156 Mud Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Mufflers, Air Valve Exhaust . . . . . . . . . . . . . . . . . . . . . . . 652 Multi-Line Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 716 Muncie PTO Pump Replacements . . . . . . . . . . . . . . . . . 106
Fluid Conveying
1280
Product Index
Product Page Product Page Hydraulic Power & Control
N
Needle Valves . . . . . . . . . . . . . . . . . . . . 294, 295, 296, 297 Never-Seez Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1228 NFPA D03 Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 Parallel Valve Manifolds . . . . . . . . . . . . . . . . . . 337 Proportional Directional Valves . . . . . 212, 213, 214 Sandwich Valves . . . . . . . . . . . . . . . . . . . . . . . . 313 Solenoid Operated Directional Valves . . . .261, 262, 263, . . . . . . . . . . . . . . . . . . . . 264, 265, 266, 267 Stack Valves . . . . . . . . . . . . . . . 319, 320, 321, 322 Subplates . . . . . . . . . . . . . . . . . . . . . . . . . . 336, 337 NFPA D05 Parallel Valve Manifolds . . . . . . . . . . . . . . . . . . 338 Solenoid Operated Directional Valves . . . .268, 269, 270, . . . . . . . . . . . 271, 272, 273, 274, 275, 276 Stack Valves . . . . . . . . . . . . . . . . . . . . . . . 323, 324 Subplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338 NFPA D08 Solenoid Operated Directional Valves . . . . . . . . 277 NFPA D10 Solenoid Operated Directional Valves . . . . . . . . 278 Nickel Anti-Seize . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1246 Nickel Plated Adapters . . . 1045, 1046, 1047, 1048, 1050, 1051, 1137, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1138 Hose Fittings . . 833, 834, 1120, 1121, 1124, 1125 Nitrogen Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715 Non-Conductive Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 713 Nonconductive Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 713 Normally Closed Solenoid Valves, Hydraulic, 2-way . 238, 239, 240, 241, . . . . . . . . . . . . . . . . . . . . . . . . 242, 243, 244 Normally Open Solenoid Valves, Hydraulic, 2-way . 245, 246, 247, 248, . . . . . . . . . . . . . . . . . . . . . . . . 249, 250, 251 Nozzles, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . 1236 Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Numatics Air Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665 Fittings . . . . . . . . . . . . . . . . . . . . . . . . 919, 920, 921 FlexiBlok Series Filter/Regulators . . . . . . . . . . . 663 FlexiBlok Series Filters . . . . . . . . . . . . . . . . . . . 662 FlexiBlok Series Lubricators . . . . . . . . . . . . . . . 664
FlexiBlok Series Regulators . . . . . . . . . . . . . . . . 663 FRL . . . . . . . . . . . . . . . . . . . . . . 661, 662, 663, 664 Manually Operated Pneumatic Valves . . . . . . . . 641 Solenoid Operated Pneumatic Valves . . . .644, 645, 646, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 647 Nylon Abrasion Sleeve . . . . . . . . . . . . . . . . . . . . 757, 759 Bundling Straps . . . . . . . . . . . . . . . . . . . . . 759, 760 Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873 Wear Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . 1182
O
Odor-Resistant Marine Sanitation Hose . . . . . . . . . . . . . . . . . . . 735 Oetiker 2-Ear Pinch Clamp Kits . . . . . . . . . . . . . . . . . . . 857 2-Ear Pinch Clamps . . . . . . . . . . . . . . . . . . . . . . 856 Pinch Clamp Installation Tools . . . . . . . . . . . . . 858 Stepless Ear Pinch Clamp Kits . . . . . . . . . . . . 858 Stepless Ear Pinch Clamps . . . . . . . . . . . . . . 857 Stepless Spring Clamps . . . . . . . . . . . . . . . . . 861 Swing Couplings . . . . . . . . . . . . . . . . . . 1059, 1062 Oil Analysis Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Drain, Quick Disconnects . . . . . . . . . . . . . . . . 1081 Drain,Quick Disconnects . . . . . . . . . . . . . . . . . 1150 Oil Resistant Air & Multi-Purpose Hose . . . . . . . . . . . . . 717, 720 Oil, Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667 Air Line Lubricator . . . . . . . . . . . . . . . . . . . . . . . 658 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1245 Hydraulic . . . . . . . . . . . . . . 1239, 1240, 1241, 1242 Power Team Hydraulic Oil . . . . . . . . . . . . . . . . . 423 Oilers, Air Line Lubricators . . . . . . . . . . . . . . . . . . 658, 663 Oils, CRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1248 Open Center Directional Control Valves 205, 206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 O-Ring Assortment Kits . . . . . . . . . . . . . . 1202, 1203, 1204 Splice Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1204 O-Ring Boss Adapters, O-Ring Face Seal to O-Ring Boss, Steel 942, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 943, 944 Hose Fittings . . . . . . . . . . . . . . . . . . . 766, 767, 778 O-Ring Face Seal Accessories, Steel . . . . . . . . . . . . . . . . . . . . . . . 949
1281
Product Index
Hydraulic Power & Control Product Page Product Page Adapters, Braze Type, Steel . . . . . . . . . . . . . . . 941 Adapters, BSPP to O-Ring Face Seal, Steel . . 1014 Adapters, O-Ring Face Seal to 37 Flare, Steel 946 Adapters, O-Ring Face Seal to O-Ring Boss, Steel 942, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 943, 944 Adapters, O-Ring Face Seal to O-Ring Face Seal, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 947, 948 Adapters, O-Ring Face Seal to Pipe, Steel . . . . 945 O-Rings For Bump Tube O-Ring Seal Fittings . . 1098, 1099 For ORS Fittings & Adapters . . . . . . . . . . . . 1098 For SAE Straight Thread Fittings & Adapters . 1098, 1099 For Split Flange Fittings . . . . . . . . . . . . . 1098, 1099 O-Rings, Inch Size . . . 1192, 1193, 1194, 1195, 1196, 1197 ORS Adapters, SAE Split Flange to O-Ring Face Seal, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 999 Braze Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 882 Hose Fittings . .767, 768, 769, 779, 780, 788, 804, 805, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 811 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1098 ORS-TF Nuts & Ferrules . . . . . . . . . . . . . . . . . . . . . 880, 881 Overbraid, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . 1154 Overcenter Valves 188, 189, 190, 191, 192, 193, 194, 195, 196, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Overhung Load Adaptors 151 Aluminum Fuel Blocks . . . . . . . . . . . . . . . . . . . 1147 Aluminum In-Line Fuel Pressure Adapters . . . 1147 Aluminum O-Ring Boss Adapters . . . . . . . . . . 1135 Aluminum Pipe Adapters . . . . . . . . . . . . . . . . . 1140 AQP Racing Hose Fittings . . . . . . . . . . . . . . 1120 BSP Banjo Bolts . . . . . . . . . . . . . . . . . . . . . . . 1149 Carburetor Adapters, Aluminum . . . . . . . . . . . 1146 Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1150 FBF A/C Hose Fittings . . . . . . . . . . . . . . . . . . . 1127 Fuel Pump Adapters, Aluminum . . . . . . . . . . . 1146 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1115 Inverted Flare Brake Adapters . . . . . . . . . . . . . 1143 Metric Adapters . . . . . . . . . . . . . . . . . . . . . . . . 1139 Metric Banjo Bolts . . . . . . . . . . . . . . . . . . . . . . 1148 Metric Banjo Brake Adapters . . . . . . . . . . . . . . 1144 Metric Banjo Hose Barbs . . . . . . . . . . . . . . . . . 1148 Metric Brake Adapters . . . . . . . . . . . . . . . . . . . 1144 PRO CLAMP Aluminum Hose Connectors . 1154 Reusable Fittings for AQP High Pressure Hose . . 1130 Reusable Fittings for SOCKETLESS hose . . 1124 SAE Banjo Brake Adapters . . . . . . . . . . . . . . . 1143 Stainless Steel Overbraid . . . . . . . . . . . . . . . . 1154 Teflon Racing Hose Fittings . . . . . . . . . . . . . 1128 Vise Jaw Inserts . . . . . . . . . . . . . . . . . . . . . . . . 1157 Permco Box Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Dump Pumps . . . . . . . . . . . . . . . . . . . . . . . 120, 121 Gear Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Gear Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Gear Pumps (Box Pumps) . . . . . . . . . . . . . . . . . 106 Versa-Pak Pumps . . . . . . . . . . . . . . . . . . . . . . . 122 Petrolatum Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1227 Petroleum Dispensing Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722 Petroleum Transfer Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Phosphate Ester Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 709, 711 Pick-up Tool, Magnetic 425 Piggyback Air Line Filter/Regulators . . . . . . . . . . . . . . 659, 663 Pilot Operated Check Valves . . . . . . 181, 182, 183, 184, 185, 186 Check Valves, Stack (Sandwich), D03 . . . . . . . 321 Check Valves, Stack (Sandwich), D05 . . . . . . . 324 Pneumatic Valves . . . . . . . . . . . . . . . . . . . . . . . 642 Solenoid Valves, Hydraulic, 2-way . 239, 240, 241, 242, . . . 243, 244, 246, 247, 248, 249, 250, 251 Pin Lug Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846 Pincers,
Fluid Conveying
P
Palm Button Pneumatic Valves . . . . . . . . . . . . . . . . . . . 638, 640 Parallel NFPA D03 Valve Manifolds . . . . . . . . . . . . . . . . 337 NFPA D05 Valve Manifolds . . . . . . . . . . . . . . . . 338 Peabody Galion Telescopic Cylinder Parts . . . . . . . . . . . . . . . . 1207 Pedal Operated Pneumatic Valves . . . . . . . . . . . . . . . . . . . . . . . 640 Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1238 Performance Products, A/C Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1118 A/C Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . 1127 Aluminum AN Flare Adapters . . . . . . . . . . . . . 1132 Aluminum AN Flare Bulkhead Adapters . . . . . 1136 Aluminum AN Flare to Pipe Adapters . . . . . . . 1137 Aluminum AN Tube Fittings . . . . . . . . . . . . . . . 1135 Aluminum Crushwashers . . . . . . . . . . . . . . . . . 1155
1282
Product Index
Product Page Product Page Hydraulic Power & Control Oetiker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 858 Pinch Clamps, Oetiker 2-Ear . . . . . . . . . . . . . . . . . . . . . . . . . . . 856 Oetiker Pinch Clamp Installation Pincers . . . . . 858 Oetiker Stepless Ear . . . . . . . . . . . . . . . . . . . . 857 Pioneer 4000 Quick Disconnect Interchange . . . . . . . . . . . . . 1071 Pipe Adapters, 42 Inverted Flare to Pipe, Brass . . 1053, 1054 Adapters, Aluminum . . . . . . . . . . . . . . . . . . . . 1140 Adapters, BSPP to Pipe, Steel . . . . . . . . . . . . 1011 Adapters, BSPT to Pipe, Steel . . . . . . . . . . . . 1018 Adapters, O-Ring Face Seal to Pipe, Steel . . . . 945 Adapters, Pipe to 37 Flare, Brass . . . . . . . . . 1044 Adapters, Pipe to 37 Flare, Stainless Steel . . 1027, 1028, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1029 Adapters, Pipe to 37 Flare, Steel . . 962, 963, 964, 965, . . . . . . . 966, 967, 968, 969, 970, 971, 972 Adapters, Pipe to 45 Flare, Brass . . . .1045, 1046, 1047, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1048 Adapters, Pipe to Hose, Steel . . . . . . . . . . . . . . 977 Adapters, Pipe to Pipe, Brass . . 1037, 1038, 1039, 1040, . . . . . . . . . . . . . . . . . . . . 1041, 1042, 1043 Adapters, Pipe to Pipe, Stainless Steel .1023, 1024, 1025, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026 Adapters, Pipe to Pipe, Steel . . 950, 951, 952, 953, 954, . . . . . . . 955, 956, 957, 958, 959, 960, 961 Adapters, Pipe to SAE O-Ring, Steel 973, 974, 975, 976 AN Flare to Pipe Adapters, Aluminum . . . . . . . 1137 Corrosion Protection Tape . . . . . . . . . . . . . . . . 1227 Flanges, SAE 4-Bolt 1085, 1086, 1087, 1088, 1089, . . . . . . . . . . . . . . . . . . . . . . . . . . 1090, 1091, 1092 Joints, Flexmaster . . . . . . . . . . . . . . . . . . 937, 938 Support Clamps . . . 1101, 1102, 1103, 1104, 1105, 1106, . . . . . . . . . . . . . . . . . . . . 1107, 1108, 1109 Pipe Cleaning System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1093 Pipe Couplings, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933 Pipe Fittings, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 928, 929 Malleable Iron . . . . . . . . . . . . . . . . . . 930, 931, 932 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933 Pipe Nipples, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 936 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 934, 935 Pipe Thread Sealants . . . . . . . . . . . . . . . . . . . . 1223, 1224, 1225 Piston Motors, Eaton Medium Duty . . . . . . . . . . . . . . . 150 Motors, Hydrostatic Transmission . . . . . . . . . . . 156 Pumps, Hydrostatic Transmission . . . 153, 154, 155 Pumps, Single, To 21 GPM @ 1800 RPM . . . . 109 Pumps, Single, To 30 GPM @ 1800 RPM 110, 111 Pumps, Single, To 32 GPM @ 1800 RPM 112, 113 Pumps, Single, To 38 GPM @ 1800 RPM . . . . 114 Rod T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 1181 Piston Cup Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1180 Piston Rings, Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1181 Piston Seals, Bronze Filled . . . . . . . . . . . . . . . . . . . . . . . . . . 1191 Double Acting . . . . . . . . . . . . . . . . . . . . . . . . . 1190 Glass Filled PTFE . . . . . . . . . . . . 1186, 1187, 1188 Polyurethane . . . . . . . . . . . . . . . . . . . . . . . . . . 1189 T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1180 Planetary Gearbox Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . 1238 Plastic Coil Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Protective Caps & Plugs . . . . . . . . . . . . 1095, 1096 Plug Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298, 299 Plugs, Magnetic Drain . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Pneumatic Cylinders . . . . . . . . . 630, 631, 632, 633, 634, 635 Flow Control Valves . . . . . . . . . . 279, 280, 650, 651 Needle Valves . . . . . . . . . . . . . . . . . . 294, 295, 296 Safety Pop-Off Valves . . . . . . . . . . . . . . . . . . . . 668 Transmission Modulating Valves . . . . . . . . . . . . 670 Valves, Manually Operated 638, 639, 640, 641, 669 Valves, Palm Button . . . . . . . . . . . . . . . . . . . . . 638 Valves, Pilot Operated . . . . . . . . . . . . . . . . . . . . 642 Valves, Solenoid Operated 643, 644, 645, 646, 647 Vibrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1232 Polyamide Air Brake Tubing . . . . . . . . . . . . . . . . . . . . . . . . 873 Polyethylene Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 872 Polyon Crimp Fittings, Brass . . . . . . . . . . . . . . . . . . . . . 831 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 713, 715 Reusable Fittings, Steel . . . . . . . . . . . . . . . . . . . 809 Swage Fittings, Steel . . . . . . . . . . . . . . . . . . . . . 793 Polyurethane Piston Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 1189 U-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1177 Pop-Off Valves, Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 668 Post Tension Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 Power Beyond
1283
Product Index
Hydraulic Power & Control Product Page Product Page Directional Control Valves 205, 206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Power Plugs, Proportional Valves . . . . . . . . . . . . . . . . . . . . . . 340 Power Steering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Power Team Air Driven Hydraulic Pumps . . . . . . . . . . . . . . . . 415 Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Cylinders, C Series . . . . . . . . . . . . . . . . . . 406, 407 Cylinders, RD Series . . . . . . . . . . . . . . . . . . . . . 410 Cylinders, RH Series . . . . . . . . . . . . . . . . . . . . . 409 Cylinders, RLS Series . . . . . . . . . . . . . . . . . . . . 407 Cylinders, RSS Series . . . . . . . . . . . . . . . . . . . . 408 Electric Powered Pumps . .416, 417, 418, 419, 420 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Hand Pumps, P Series . . . . . . . . . . . 412, 413, 414 High Pressure Hoses . . . . . . . . . . . . . . . . . . . . . 421 Hydraulic Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 423 Hydraulic Puller Sets . . . . . . . . . . . . . . . . . 436, 437 Hydraulic Punches . . . . . . . . . . . . . . . . . . . . . . . 430 Jacks, High Tonnage . . . . . . . . . . . . . . . . . . . . . 427 Jaw Pullers, Mechanical . . . . . . . . . . . . . . . . . . 432 Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 Post Tension & Stressing Jacks . . . . . . . . . . . . 426 Puller Sets . . . . . . . . . . . . . . . . . . . . . . . . . 434, 435 Push-Pullers, Mechanical . . . . . . . . . . . . . . . . . 433 Torque Wrench Pumps . . . . . . . . . . . . . . . . . . . 429 Torque Wrenches . . . . . . . . . . . . . . . . . . . 428, 429 Valves, In-Line . . . . . . . . . . . . . . . . . . . . . . . . . . 425 Valves, Pump Mounted . . . . . . . . . . . . . . . . . . . 411 Wrenches & Pry Bars . . . . . . . . . . . . . . . . . . . . 431 Power Trim Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . 827, 828 Power Unit Breathers . . . . . . . . . . . . . . . . . . . . . . 378, 379, 380 Breathers, Filler-Breathers . . . . . . . . 375, 376, 377 Power Units, AC . . . . . . . . . . . . . . . . . . .368, 370, 371, 372, 374 DC . . . . . . 362, 363, 364, 365, 370, 371, 372, 373 Preformed Hose Clamps, Band-It . . . . . . . . . . . . . . . . . . . 864 Hose Clamps, Dixon F Series Center Punch . . 865 Pressure Gauge Adaptors . . . . . . . . . . . . . . . . . . . . . . . . 405 Gauges . . . . . . . . . . . . . . . . . . . 388, 389, 390, 422 Reducing Valves . . . . . . . . . . . . . . . . . . . . 300, 301 Switches . . . . . . . . . . . . . . . . . . . . . . 398, 399, 400 Pressure Compensated Flow Control Valves . 281, 282, 284, 285, 286, 287, 288 Flow Divider Valves . . . . . . . . . . . . . . 290, 291, 292 Piston Pumps . . . . . 109, 110, 111, 112, 113, 114 Pressure Line Hydraulic Filters . . . . . . . . . . . . . . . . . . . . . . . . . 356 Pressure Modulating Air Valves, Manually Operated . . . . . . . . . . . . . 669 Pressure Reducing Valves, Stack (Sandwich), D03 . . . . . . . . . . . . . . . . . . . 320 Pressure Test Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 401, 402 Pressure Washer Hoses, QD's, Adapters, Guns, Wands, Nozzles . . . 1235, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1236 Spray Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1236 Priority Flow Control Valves . . . . . . . . . . 284, 285, 287, 288 PRO CLAMP Aluminum Hose Connectors . . . . . . . . . . . . . . 1154 Profile-Pak Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Projectiles, Goodway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1093 Propane Gas Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 742 Proportional Flow Divider Valves . . . . . . . . . . . . . . 290, 291, 292 Valve Power Plugs . . . . . . . . . . . . . . . . . . . . . . . 340 Valves, Hydraulic, NFPA D03 . . . . . . 212, 213, 214 Protective Caps & Plugs . . . . . . . . . . . . . . . . . . . . . 1095, 1096 Coil Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Petrolatum Tape . . . . . . . . . . . . . . . . . . . . . . . 1227 Plastic Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Pry Bars, Power Team . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 PTFE Hose . . . . . . . . . . . . . . . . . . . . 744, 745, 746, 1118 Thread Sealants . . . . . . . . . . . . . . . . . . 1223, 1225 PTO Control Cables . . . . . . . . . . . . . . . . . . . . . . . . . 1219 Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Puller Sets, Power Team . . . . . . . . . . . . . . . . . . . . . . . 434, 435 Pullers, Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . 436, 437 Jaw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 Push-Pullers . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Pump Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 Foot Valves, Strainers, Skimmers . . . . . . . . . . . 131 Pump/Engine Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
Fluid Conveying
1284
Product Index
Product Page Product Page 717 724 751 737 875 750 Hydraulic Power & Control Pump/Motor Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 Pumps, Air Driven Hydraulic . . . . . . . . . . . . . . . . . . . . . . 415 Air Operated Diaphragm . . . . . . . . . . . . . . 126, 127 Barrel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1257 Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . 1256, 1257 Centrifugal . . . . . . . . . . . . . . . . . . . . . . . . . 128, 129 Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Double, Miscellaneous . . . . . . . . . . . . . . . 117, 118 Dump, To 38 GPM @ 1800 RPM . . . . . . . 120, 121 Electric, 10,000 PSI . . . . . .416, 417, 418, 419, 420 Gear, Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Gear, Single, To 13 GPM @ 1800 RPM . . . . . . 101 Gear, Single, To 19 GPM @ 1800 RPM . . . . . . 103 Gear, Single, To 22 GPM @ 1800 RPM . . . . . . 102 Gear, Single, To 24 GPM @ 1800 RPM . . . . . . 104 Gear, Single, To 26 GPM @ 1800 RPM . . 105, 106 Gear, Single, To 46 GPM @ 1800 RPM . . . . . . 106 Hand . . . . . . . . . . . . . . . . . . . . . . . . . 412, 413, 414 Hand Operated . . . . . . . . . . . . . . . . . . . . . 124, 125 Hydrostatic Transmission . . . . . . . . . 153, 154, 155 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Piston, Single, To 21 GPM @ 1800 RPM . . . . . 109 Piston, Single, To 30 GPM @ 1800 RPM . 110, 111 Piston, Single, To 32 GPM @ 1800 RPM . 112, 113 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . . 123 PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Refuse Pump System . . . . . . . . . . . . . . . . . . . . 122 Torque Wrench . . . . . . . . . . . . . . . . . . . . . . . . . 429 Vane, Double, To 19.5/10.5 GPM @ 1800 RPM 116 Vane, Single . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Vane, Single, To 10.5 GPM @ 1800 RPM . .86, 87, 88, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Vane, Single, To 19.5 GPM @ 1800 RPM . .90, 91, 92, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Vane, Single, To 31.5 GPM @ 1800 RPM 94, 95, 96 Vane, Single, To 57 GPM @ 1800 RPM . . . . . . . 97 Vane, Single, To 90 GPM @ 1800 RPM . . . . 98, 99 Punches, Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430 Push > Connect Tube Fittings, Brass . . . . . . . . . . 913, 914, 915, 916 Tube Fittings, Brass, Metric . . . . . . . . . . . . 922, 923 Push-In Hose . . . . . . . . . . . . . . . . . . . . 720, 721, 722, 1015 Hose Fittings . . . . . . . . . . . . . . . . . . 810, 811, 1006 Tube Fittings, Brass . . . . . . . . . . . . . . . . . . 917, 918 Push-Pull Control Cables . . . . . . . . . . . . . . . 1208, 1209, 1210 Push-Pullers, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 PVC Air & Multipurpose Hose . . . . . . . . . . . . . . . . . . Lay Flat Water Discharge Hose . . . . . . . . . . . . . Layflat Water Discharge Hose Assemblies . . . . Marine Hose . . . . . . . . . . . . . . . . . . . 735, 736, Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874, Water Suction & Discharge Hose Assemblies . .
Q
Quad Rings, Assortment Kits . . . . . . . . . . . . . . . . . . . . . . . . 1202 Buna-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1185 Quick > Connect Tube Fittings, Brass . . . . . . . . . . . . . . 924, 925, 926 Quick Disconnect Control Cables . . . . . . . . . . . . . . . 1216, 1217, 1218 Quick Disconnects, Air . . .1058, 1059, 1060, 1061, 1062, 1063, 1064, 1065 Diagnostic . . . . . . . . . . . . . 1083, 1084, 1151, 1153 Fluid Transfer & Refrigerant . . . . . . . . . . . . . . 1078 High Force Hydraulic . . . . . . . . . . . . . 404, 405, 422 High Pressure Water Blast . . . . . . . . . . . . . . . 1082 Hydraulic Farm . . . . . . . . . . . . . . . . . . . 1079, 1080 Hydraulic Tool . . . . . . . . . . . . . . . . . . . . 1076, 1077 Hydraulic, Industrial Interchange, Brass . . . . . 1074 Hydraulic, Industrial Interchange, Stainless Steel . . 1075 Hydraulic, Industrial Interchange, Steel .1068, 1069, 1070, . . . . . . . . . . . . . . . . . . . . 1072, 1073, 1152 Hydraulic, Low Spill, Connect Under Pressure 1066, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1067 Hydraulic, Pioneer 4000 Interchange . . . . . . . 1071 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1057 Oil Drain . . . . . . . . . . . . . . . . . . . . . . . . . 1081, 1150 Pressure Washer . . . . . . . . . . . . . . . . . . 1235, 1236 Radiator/Cooling Refill . . . . . . . . . . . . . . . . . . . 1150
R
Racing Hose . . . . . . . . . . . . . . . . . 1116, 1117, 1118, 1119 Radiator Quick Disconnects . . . . . . . . . . . . . . . . . . . . . . 1150 Rams, High Force . . . . . . . . . . . . .406, 407, 408, 409, 410 Reducers, Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1156 Reducing Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300, 301 Reels, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234 Refrigerant Quick Disconnects, Fluid Transfer & Refrigerant . . .
1285
Product Index
Hydraulic Power & Control Product Page Product Page 1078 Refrigerant 134a Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 744 Refrigeration Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743, 744 Hose Fittings . .816, 817, 818, 819, 820, 821, 822, 823, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 824 Refuse Truck Pump System . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Regulators, Air Line . . . . . . . . . . . . . . . . . . . . . . . . . . . 658, 663 Release Tools, STC Connector . . . . . . . . . . . . . . . . . . . . . . . . 752 Relief Valves, Air Safety Pop-Off Valves . . . . . . . . . . . . . . . . . 668 Cushion . . . . . . . . . . . . . . . . . . . 198, 199, 200, 201 Direct Acting Differential Poppet, To 20 GPM . . 305 Direct Acting Differential Poppet, To 80 GPM . . 306 Direct Acting, Ball Type . . . . . . . . . . . . . . . . . . . 302 Direct Acting, Differential Poppet Type . . . 305, 306 Direct Acting, Poppet Type . . . . . . . . . . . . 303, 304 Direct Acting, To 10 GPM . . . . . . . . . . . . . . . . . 304 Direct Acting, To 20 GPM . . . . . . . . . . . . . . . . . 302 Direct Acting, To 3 GPM . . . . . . . . . . . . . . . . . . 303 Guided Piston . . . . . . . . . . . . . . . . . . . . . . . . . . 312 Pilot Operated, Poppet Type . . . . . . . . . . . . . . . 307 Pilot Operated, Spool Type . . . . 308, 309, 310, 311 Pilot Operated, To 120 GPM . . . . . . . . . . . . . . . 310 Pilot Operated, To 20 GPM . . . . . . . . . . . . . . . . 308 Pilot Operated, To 30 GPM . . . . . . . . . . . . . . . . 307 Pilot Operated, To 80 GPM . . . . . . . . . . . . . . . . 309 Stack (Sandwich), D03 . . . . . . . . . . . . . . . . . . . 319 Stack (Sandwich), D05 . . . . . . . . . . . . . . . . . . . 323 Subplate Mounted, To 106 GPM . . . . . . . . . . . . 311 Remote Valve Control Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1220 Reservoir Filler Breathers . . . . . . . . . . . . . . . . . . . . . . . . . 377 Sight Glasses . . . . . . . . . . . . . . . . . . . . . . 383, 384 Vent Filters . . . . . . . . . . . . . . . . . . . . . . . . 378, 379 Restrictor Adapters, Steel . . . . . . . . . . . . . . . . . . . . . . . . 1002 Retainer Rings, Spiral External . . . . . . . . . . . . . . . . . . . . . . . . . 1200 Return Filters, Hydraulic 343, 344, 345, 346, 347, 348, 349, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350, 352, 354 Reusable Hose Fittings, Marine Steering, Brass . . . . . . . . 837 Reusable Fittings, Marine Steering, Brass . . . . . . . . . . . . . . . . . . . 837 Reusable Hose Fittings, 1 Wire Braid, Reduced Bore, Brass . . . . . . . . . . 833 1 Wire Braid, Reduced Bore, Steel . 800, 801, 802, 803, . . . . . . . . . . . . . . . . . . . . . . . . 804, 805, 806 2 Wire Braid, Skive, Steel . . . . . . . . . . . . . . . . . 807 2 Wire Braid, Thru-The-Cover, Steel . . . . . . . . . 808 Air Brake, Steel . . . . . . . . . . . . . . . . . . . . . . . . . 812 Polyon, Steel . . . . . . . . . . . . . . . . . . . . . . . . . 809 SOCKETLESS, Brass . . . . . . . . . . 834, 835, 836 SOCKETLESS, Steel . . . . . . . . . . . . . . . 810, 811 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 829 Teflon 1 Braid, Stainless Steel . . . . . . . . . . . . 830 Teflon 1 Braid, Steel . . . . . . . . . . . . 813, 814, 815 Right Angle Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Pneumatic Flow Control Valves . . . . . . . . . . . . . 650 Rod T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1181 Rod Buffer Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1185 Rod Clevis, Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 633 RTV Silicone Adhesive, Sealants . . . . . . . . . . . . . . 1248
Fluid Conveying
S
SAE Full Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . 939 Half Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . 939 SAE 100R18 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 714 SAE 100R7 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 712, 714 SAE 100R8 Thermoplastic Hose . . . . . . . . . . . . . . . . . . 715, 716 SAE 4-Bolt Flanges 1085, 1086, 1087, 1088, 1089, 1090, 1091, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1092 SAE Banjo Brake Adapters . . . . . . . . . . . . . . . . . . . . . . . . 1143 SAE J2006 Marine Wet Exhaust Products . 727, 728, 729, 730, 731 SAE J517 Non-Conductive Hose . . . . . . . . . . . . . . . . . . . . 713 SAE O-Ring Adapters, Pipe to Hose, Steel . . . . . . . . . . . . . . 996 Adapters, Pipe to SAE O-Ring, Steel 973, 974, 975, 976 Adapters, SAE O-Ring to 37 Flare, Stainless Steel 1033 Adapters, SAE O-Ring to 37 Flare, Steel .988, 989, 990, . . . . . . . . . . . . . . . . . . . . . . . . 991, 992, 993 Adapters, SAE O-Ring to SAE O-Ring, Steel . . 994,
1286
Product Index
Product Page Product Page Hydraulic Power & Control 995 Aluminum O-Ring Boss Adapters . . . . . . . . . . 1135 Assortment Kits . . . . . . . . . . . . . . . . . . . . . . . . 1202 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . 1098, 1099 SAE Split Flange Adapters, SAE Split Flange to 37 Flare, Steel . 997, 998 Adapters, SAE Split Flange to O-Ring Face Seal, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 999 SAF-T-EZE Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1228 SAF-T-LOK Thread Lockers . . . . . . . . . . . . . . . . . . . . . . . . 1226 Sample Kits, Hydraulic Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Sandwich Valves, NFPA D03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 Sanitation Hose, Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . 735 Schedule 40 Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . 934 Schedule 80 Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . 934 Schraeder Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Screw-In Cartridge Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 Counterbalance Valves . . 188, 189, 190, 191, 192, 193, . . . . . . . . . . . . . . . . . . . . 194, 195, 196, 197 Directional Valves . . . . . . . . . . . . . . . . . . . . . . . 202 Flow Control Valves . . . . . . . . . . . . . . 283, 284, 285 Flow Divider Valves . . . . . . . . . . . . . . . . . . . . . . 292 Needle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Pilot-Operated Check Valves . 181, 182, 184, 185, 186 Pressure Reducing Valves . . . . . . . . . . . . 300, 301 Relief Valves . . . . . . 304, 305, 306, 307, 308, 309 Shuttle Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 326 Solenoid Valves 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, . . . . . . . . . . . . . . . . 255, 256, 257, 258, 259, 260 SCRUBS in-a-Bucket Hand Cleaner Towels . . . . . . . . . . . . . . . . . . . 1229 Scupper Line Marine Hose . . . . . . . . . . . . . . . . . . . . . . . 734, 735 Seal Assortment Kits . . . . . . . . . . . . . . 1202, 1203, 1204 Seal Kits, Apollo Ball Valves . . . . . . . . . . . . . . . . . . . . . . 172 Monarch TL & TX Series Cylinders . . . . . . 157, 158 Vickers DG4V-3 & DG4V-3S . . . . . . . . . . . . . . . 265 Seals, Back Up Rings, Inch Size . . . . . . . . . . . 1198, 1199 Bronze Filled Piston . . . . . . . . . . . . . . . . . . . . . 1191 Buna-N Quad Rings . . . . . . . . . . . . . . . . . . . . . 1185 Buna-N U-Seals . . . . . . . . . . . . . . . . . . . . . . . . 1179 Cast Iron Piston Rings . . . . . . . . . . . . . . . . . . . 1181 Caterpillar D-Rings . . . . . . . . . . . . . . . . . . . . . 1185 Double Acting Piston . . . . . . . . . . . . . . . . . . . . 1190 Metal Clad Rubber Wiper Rings . . . . . . . . . . . 1183 Metal Clad Urethane Wiper Rings . . . . . 1183, 1184 Metric & BSP Bonded . . . . . . . . . . . . . . . . . . . 1094 Nylon Wear Rings . . . . . . . . . . . . . . . . . . . . . . 1182 O-Rings, Inch Size . 1192, 1193, 1194, 1195, 1196, 1197 Piston Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . 1180 Piston Seals, Glass Filled PTFE . 1186, 1187, 1188 Piston Seals, Polyurethane . . . . . . . . . . . . . . . 1189 Piston T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . 1180 Polyurethane U-Seals . . . . . . . . . . . . . . . . . . . 1177 Rod Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1185 Rod T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 1181 Urethane U-Seals, Metric . . . . . . . . . . . . . . . . 1201 Urethane Wiper Rings . . . . . . . . . 1182, 1183, 1184 Vee Packing Sets . . . . . . . . . . . . . . . . . . . . . . 1179 SeaStar Hose Fitting, Crimp, Brass . . . . . . . . . . . . . . . . . 832 Hose Fitting, Reusable, Brass . . . . . . . . . . . . . . 837 Sectional Valves, Hydraulic . . . 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, . . . . . . . . . . . . 231, 232, 233, 234, 235, 236, 237 Selector Valves, 2-Wheel, 4-Wheel . . . . . . . . . . . . . . . . . . . . . . . 316 3-Way 6-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . 317 Double . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Self Aligning Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 Service Station Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Shank Type Fittings, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846 Brass . . . . . . . . . . . . . . . . . . . . . . . . . 839, 840, 841 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 845 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843, 844 Shuttle Valves, Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . 325, 326 Sight Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . 383, 384 Silent Tank System Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Silicone Adhesive, Sealants . . . . . . . . . . . . . . . . . . . . . 1248 Lubricants, Food Grade . . . . . . . . . . . . . . . . . . 1246 Marine Wet Exhaust Elbows . . . . . . . . . . . . . . . 731
1287
Product Index
Hydraulic Power & Control Product Page Product Page Marine Wet Exhaust Hose . . . . . . . . . . . . . 729, 730 Marine Wet Exhaust Hump Hose . . . . . . . . . . . 730 Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1156 Silicone Rubber Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741 Single Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Single Acting Cylinder Pump Sets . . . . . . . . . . . . . . . . . . . . . . 403 Skimmers, Water Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Skive Sockets, Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791 Skydrol Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 709, 711 Sleeves, 37 Flare, Steel . . . . . . . . . . . . . . . . . . . . . . . . . 878 Teflon 1 Braid Hose Fittings . . . . . . . . . . 815, 830 Teflon Racing Hose Fittings . . . . . . . . . . . . . 1130 Slip-In Cartridge Valves . . . . . . . . . . . . . . . . . . . . . . . . 318 Snubbers, Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 SOCKETLESS Assembly Tool . . . . . . . . . . . . . . . . . . . . . 754, 1158 Hose . . . . . . . . . . . . . . . . . . . . . . . . 721, 722, 1117 Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . 1124 Reusable Fittings, Brass . . . . . . . . . . 834, 835, 836 Reusable Fittings, Steel . . . . . . . . . . . . . . . 810, 811 Type Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 720 Soft Shift Solenoid Operated Directional Control Valves . 266, 267, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 Solenoid Coils, Cartridge Valves . . . . . . . . . . . . . . . . . . . 332 Valve Connectors . . . . . . . . . . . 333, 334, 335, 410 Valves, Hydraulic . . . . . . . . . . . . . . . . . . . . 206, 207 Valves, Hydraulic, 2-way . 238, 239, 240, 241, 242, 243, . . . 244, 245, 246, 247, 248, 249, 250, 251 Valves, Hydraulic, 3-way . . . . . . 252, 253, 254, 255 Valves, Hydraulic, 4-way . .256, 257, 258, 259, 260 Valves, Hydraulic, NFPA D03 . 261, 262, 263, 264, 265, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266, 267 Valves, Hydraulic, NFPA D05 . 268, 269, 270, 271, 272, . . . . . . . . . . . . . . . . . . . . 273, 274, 275, 276 Valves, Hydraulic, NFPA D08 . . . . . . . . . . . . . . 277 Valves, Hydraulic, NFPA D10 . . . . . . . . . . . . . . 278 Valves, Hydraulic, Sectional . . 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, . . . . 229, 230, 231, 232, 233, 234, 235, 236, 237 Solenoid Operated Pneumatic Valves . . . . . . .643, 644, 645, 646, 647 Selector Valves . . . . . . . . . . . . . . . . . . . . . . . . . 317 Solvent Pumps, Air-Operated Diaphragm . . . . . . . 126, 127 Spanner Wrenches, Power Team . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 Speed Controls, Air Valve Exhaust . . . . . . . . . . . . . . . . . . . 652, 653 Spin-On Hydraulic Filters . . . . . . . . .343, 344, 345, 346, 347 Reservoir Vent Filters . . . . . . . . . . . . . . . . 378, 379 Spiral External Retainer Rings . . . . . . . . . . . . . . . . . . 1200 Spiral Hose Fittings, Matchmate TTC12 777, 778, 779, 780, 781, 782, 783, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 784 Spiral TTC . . . . . . . . . . . . .785, 786, 787, 788, 789 Spiral Wire Reinforced Hose . . . . . . . . . . . . . . . . . . . . . 709, 710, 711, 712 Splice Kits, O-Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1204 Splined Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Split Flange Hose Fittings . .770, 780, 781, 782, 785, 786, 788, 803 Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1097 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . 1098, 1099 Spray Tips, Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . 1236 Spread Cylinders, High Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410 Spring Guard, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Spring Rewind Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . 1234 SSP Adapters, 37 Flare, Stainless Steel . . .1030, 1031, 1032 Adapters, Auxiliary Components, Stainless Steel . . 1036 Adapters, Pipe to 37 Flare, Stainless Steel . . 1027, 1028, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1029 Adapters, Pipe to Pipe, Stainless Steel .1023, 1024, 1025, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1026 Adapters, SAE O-Ring to 37 Flare, Stainless Steel 1033 Duolok Tube Fittings, Brass . . . . . . . . . . 911, 912 Duolok Tube Fittings, Stainless Steel . . .895, 896, 897, . . . . . . . . . . . . . . . . . . . . . . . . 898, 899, 900 Flare Nuts & Sleeves . . . . . . . . . . . . . . . . . . . . . 894 Hose Barbs, Stainless Steel . . . . . . . . . . . . . . . 845 Stack Valves, Hydraulic Directional Control 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227,
Fluid Conveying
1288
Product Index
Product Page Product Page Hydraulic Power & Control 228, 229, 230, 231, 232, 233, 234, 235, 236, 237 Valves, NFPA D03 . . . . . . . . . . . 319, 320, 321, 322 Valves, NFPA D05 . . . . . . . . . . . . . . . . . . . 323, 324 Stainless Steel 37 Flare Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . 894 37 Flare Sleeves . . . . . . . . . . . . . . . . . . . . . . . 894 Adapters, 37 Flare Union . . . . . . 1030, 1031, 1032 Adapters, Auxiliary Components . . . . . . . . . . . 1036 Adapters, BSPP to 37 Flare . . . . . . . . . . . . . . 1035 Adapters, Metric to 37 Flare . . . . . . . . . . . . . . 1034 Adapters, Pipe to 37 Flare . . . . . 1027, 1028, 1029 Adapters, Pipe to Pipe . . . . 1023, 1024, 1025, 1026 Adapters, SAE O-Ring to 37 Flare . . . . . . . . . 1033 Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 865 Gauges . . . . . . . . . . . . . . . . . . . . . . . 388, 389, 390 Grease Fittings . . . . . . . . . . . . . . . . . . . . . . . . 1253 Hose Barbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 845 Hose Fittings, Crimp, Aeroquip . . . . . . . . 825, 826 Hose Fittings, Crimp, Everflex . . . . . . . . 827, 828 Hose Fittings, Flat Crimp, Convoluted, Aeroquip . 826 Hose Fittings, Reusable . . . . . . . . . . . . . . . . . . 829 Hose Fittings, Reusable, Teflon 1 Braid . . . . . 830 Internal Support Coil . . . . . . . . . . . . . . . . . . . . . 758 Metric Flareless Tube Fittings . . . . . . . . . . . . . . 901 Overbraid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1154 Pneumatic Cylinders . . . . . . . . . . . . . 632, 633, 634 Quick Disconnects, Hydraulic . . . . . . . . . . . . . 1075 T-Bolt Hose Clamps . . . . . . . . . . . . . 859, 860, 862 Tube Fittings, Flareless . . 895, 896, 897, 898, 899, 900 Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871 Worm Gear Hose Clamps . . . . . . . . . . . . . . . . . 855 Standpipe Straight Tube Hose Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 772 StartLite Racing Hose . . . . . . . . . . . 1116, 1117, 1118, 1119 Stauff Ball Valves, Steel . . . . . . . . . . . . . . . . . . . . . . . . 170 Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Filters . . . . . . . . . . . . . . . . .343, 344, 345, 346, 347 Gauge Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Pipe & Tubing Support Clamps . 1102, 1103, 1104, 1105, . . . . . . . . . . . . . . . 1106, 1107, 1108, 1109 Return Filters, RTF40 Series . . . . . . . . . . . . . . . 352 Suction Strainers . . . . . . . . . . . . . . . . . . . . . . . . 342 Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402 Staybond Pipe Thread Sealants . . . . . . . . . . . . . . 1223, 1224 Thread Lockers . . . . . . . . . . . . . . . . . . . . . . . . 1226 STC Connector Release Tools . . . . . . . . . . . . . . . . . . . . . . . . . . 752 Steam Hose . . . . . . . . . . . . . . . . . . . . . . . . . 744, 745, 746 Steel 37 Flare Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . 878 37 Flare Sleeves . . . . . . . . . . . . . . . . . . . . . . . 878 Adapters, 37 Flare . 978, 979, 980, 981, 982, 983, 984, . . . . . . . . . . . . . . . . . . . . . . . . 985, 986, 987 Adapters, 42 Inverted Flare to 37 Flare . . . . 1001 Adapters, Braze & Weld to 37 Flare . . . . . . . . 1000 Adapters, BSPP to 37 Flare, Steel . . . .1008, 1009, 1010 Adapters, BSPP to BSPT . . . . . . . . . . . . . . . . 1013 Adapters, BSPP to Metric, Steel . . . . . . . . . . . 1012 Adapters, BSPP to O-Ring Face Seal . . . . . . . 1014 Adapters, BSPP to Pipe . . . . . . . . . . . . . . . . . 1011 Adapters, BSPP, Steel . . . . . . . . 1015, 1016, 1017 Adapters, BSPT to 37 Flare . . . . . . . . . . . . . . 1019 Adapters, BSPT to Pipe . . . . . . . . . . . . . . . . . . 1018 Adapters, JIS . . . . . . . . . . . . . . . . . . . . . . . . . . 1020 Adapters, JIS 30 Seat (BSPP Thread) To 37 Flare 1021 Adapters, Kobelco . . . . . . . . . . . . . . . . . . . . . . 1022 Adapters, Komatsu . . . . . . . . . . . . . . . . . . . . . 1022 Adapters, Metric . . . . . . . . . . . . . . . . . . . . . . . . 1007 Adapters, Metric to 37 Flare . . . . 1003, 1004, 1005 Adapters, Metric to Pipe . . . . . . . . . . . . . . . . . 1006 Adapters, O-Ring Face Seal Accessories . . . . . 949 Adapters, O-Ring Face Seal Braze Type . . . . . 941 Adapters, O-Ring Face Seal to 37 Flare, Steel 946 Adapters, O-Ring Face Seal to O-Ring Boss . . 942, 943, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 944 Adapters, O-Ring Face Seal to O-Ring Face Seal . 947, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 948 Adapters, O-Ring Face Seal to Pipe . . . . . . . . . 945 Adapters, Pipe to 37 Flare 962, 963, 964, 965, 966, . . . . . . . . . . . . . . . . 967, 968, 969, 970, 971, 972 Adapters, Pipe to Hose . . . . . . . . . . . . . . . . . . . 977 Adapters, Pipe to Pipe . . . 950, 951, 952, 953, 954, 955, . . . . . . . . . . . 956, 957, 958, 959, 960, 961 Adapters, Pipe to SAE O-Ring . . 973, 974, 975, 976 Adapters, Restrictor . . . . . . . . . . . . . . . . . . . . . 1002 Adapters, SAE O-Ring to 37 Flare . 988, 989, 990, 991, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 992, 993 Adapters, SAE O-Ring to Hose . . . . . . . . . . . . . 996 Adapters, SAE O-Ring to SAE O-Ring . . . 994, 995 Adapters, SAE Split Flange to 37 Flare . . 997, 998 Adapters, SAE Split Flange to O-Ring Face Seal . . 999 Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . 169, 170 Brake Line Assemblies . . . . . . . . . . . . . . . . . . . 876 Check Valves . . . . . . . . . . .173, 174, 175, 176, 177 Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Flareless Tube Fittings . . . . . . . . . . . . . . . 884, 885
1289
Product Index
Hydraulic Power & Control Product Page Product Page Flow Control Valves . . . . . . . . . . 279, 280, 281, 282 Hose Barbs . . . . . . . . . . . . . . . . . . . . . . . . 843, 844 Hose Fittings, E-Z Clip . 816, 817, 818, 819, 820, 821, . . . . . . . . . . . . . . . . . . . . . . . . 822, 823, 824 Hose Fittings, Field Crimp . . . . . . . . . . . . . . . . . 790 Hose Fittings, Flat Crimp . . . . . . . . . . . . . . 798, 799 Hose Fittings, Global Skive . . . . . . . . . . . . . . . . 791 Hose Fittings, Matchmate TTC 763, 764, 765, 766, 767, 768, 769, 770, 771, 772, 773, 774, 775, 776 Hose Fittings, Matchmate TTC12 . 777, 778, 779, 780, . . . . . . . . . . . . . . . . . . . . 781, 782, 783, 784 Hose Fittings, OTC . . . . . . . . . . . . . . . . . . . . . . 792 Hose Fittings, Polyon Swage . . . . . . . . . . . . . 793 Hose Fittings, Reusable, 1 Wire Braid, Full Bore 806 Hose Fittings, Reusable, 1 Wire Braid, Reduced Bore . . . . . . . . . . . . . . . . 800, 801, 802, 803, 804, 805 Hose Fittings, Reusable, 2 Wire Braid, Skive . . 807 Hose Fittings, Reusable, 2 Wire Braid, Thru-TheCover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 808 Hose Fittings, Reusable, Air Brake . . . . . . . . . . 812 Hose Fittings, Reusable, Polyon . . . . . . . . . . 809 Hose Fittings, Reusable, SOCKETLESS 810, 811 Hose Fittings, Reusable, Teflon 1 Braid .813, 814, 815 Hose Fittings, Spiral TTC .785, 786, 787, 788, 789 Hose Fittings, Synflex Swage . 794, 795, 796, 797 Hose Menders . . . . . . . . . . . . . . . . . . . . . . . . . . 844 Hose Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . 843 Inverted Flare Nuts . . . . . . . . . . . . . . . . . . . . . . 878 King Combination Nipples . . . . . . . . . . . . . . . . . 843 Metric Flareless Tube Fittings . 886, 887, 888, 889, 890, . . . . . . . . . . . . . . . . . . . . . . . . 891, 892, 893 Needle Valves . . . . . . . . . . . . . . . . . . 294, 295, 296 Pipe Couplings . . . . . . . . . . . . . . . . . . . . . . . . . 933 Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933 Pipe Nipples . . . . . . . . . . . . . . . . . . . . . . . 934, 935 Quick Disconnects, Air . . 1058, 1059, 1060, 1061, 1062, . . . . . . . . . . . . . . . . . . . . 1063, 1064, 1065 Quick Disconnects, Diagnostic . 1083, 1084, 1151, 1153 Quick Disconnects, Fluid Transfer & Refrigerant . . 1078 Quick Disconnects, High Pressure Water Blast 1082 Quick Disconnects, Hydraulic . . 1066, 1067, 1068, 1069, . . . . 1070, 1076, 1077, 1079, 1080, 1152 Quick Disconnects, Oil Drain . . . . . . . . . 1081, 1150 SAE 4-Bolt Flanges 1085, 1086, 1087, 1088, 1089, 1090, 1091, 1092 SAE Full Couplings . . . . . . . . . . . . . . . . . . . . . . 939 SAE Half Couplings . . . . . . . . . . . . . . . . . . . . . . 939 Spring Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . 755 Tube Fittings, ORS-TF . . . . . . . . . . . . . . 880, 881 Tube Fittings, Versil Flare . . . . . . . . . . . . . . . 879 Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869 Tubing, Metric . . . . . . . . . . . . . . . . . . . . . . . . . . 870 Steering Hose, Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . 737 Units, Columns, Wheels . . . . . . . . . . 162, 163, 164 Steering, Marine, Crimp Fittings, Brass . . . . . . . . . . . . . . 832 Marine, Reusable Fittings, Brass . . . . . . . . . . . . 837 Stepless Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 857, 861 Straight Thread O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . 1098, 1099 Strainers, Suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Water Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Y Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1229 Strataflo Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Stressing Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 Subplate Mounted Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 Subplates, NFPA D03 - ISO 4401 Size 3 . . . . . . . . . . 336, 337 NFPA D05 - ISO 4401 Size 5 . . . . . . . . . . . . . . 338 Suction Filters, Hydraulic . . . . . . . .343, 344, 345, 346, 347 Hose . . . . . . . . . . . . . . . . . . . . . . . . . 699, 700, 723 Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Sump Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 Pumps, Air-Operated Diaphragm . . . . . . . 126, 127 Sun (replacement) Counterbalance Valves, 1SE30 . . . . . . . . . . . . . 191 Counterbalance Valves, 1SE90 . . . . . . . . . . . . . 194 Counterbalance Valves, 1SEB30 . . . . . . . . . . . 192 Sun-Flow Water Discharge Hose . . . . . . . . . . . . . . . . . . . . 724 Sunrise Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719 Super-Vac Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Support Clamps, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1100 Pipe & Tubing 1101, 1102, 1103, 1104, 1105, 1106, . . . . . . . . . . . . . . . . . . . . . . . . . . 1107, 1108, 1109 Support Coil, Internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758 Swage Hose . . . . . . . . . . . . . . . . .712, 713, 714, 715, 716 Swage Fittings,
Fluid Conveying
1290
Product Index
Product Page Product Page Hydraulic Power & Control Polyon, Steel . . . . . . . . . . . . . . . . . . . . . . . . . 793 Synflex, Steel . . . . . . . . . . . . . 794, 795, 796, 797 Swing Couplings, Oetiker . . . . . . . . . . . . . . . . . . . . . . . . . . 1059, 1062 Switches, Pressure . . . . . . . . . . . . . . . . . . . . . . 398, 399, 400 Swivel Joints Heavy Duty, Full Flow . . . . . . . . . . . . . . . . . . . 1112 Standard Duty, Balanced Pressure . . . . 1110, 1111 Synflex 25CT Constant Pressure Hose . . . . . . . . . . . . . 714 30CT Constant Pressure Hose . . . . . . . . . . . . . 714 3130 Medium Pressure Hose . . . . . . . . . . . . . . 712 3770 Twin & Multi-Line Hose . . . . . . . . . . . . . . . 716 37AL Non-Conductive Hose . . . . . . . . . . . . . . . 713 3800 High Pressure Hose . . . . . . . . . . . . . . . . . 716 3R80 High Pressure Hose . . . . . . . . . . . . . . . . . 715 Hose Fittings, Swage, Steel . . . 794, 795, 796, 797 System Overhead Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 System-Center Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 System-L Series Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 System-Pak Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 System-Pak II Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 System-Pak Plus Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Hose Fittings, Steel . . . . . . . . . . . . . . 813, 814, 815 Sleeves, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . 815 Sleeves, Stainless . . . . . . . . . . . . . . . . . . . . . . . 830 Teflon Racing Hose Fitting Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . 1130 Telescopic Cylinder Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 1206, 1207 Temperature Compensated Flow Control Valves . . . . . . . . . . . . . . . . . . . . . . 286 Test Point Hoses & Couplings . . . . . . . . . . . . . . . . . . 401, 402 Textbooks, Fluid Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 1231 Thermal Transfer Heat Exchangers . . . . . . . . . . . . 394, 395, 396, 397 Thermoplastic Hose . . . . . . . . . . . . . . . . .712, 713, 714, 715, 716 Thermoplastic Hose, Polyon Crimp Fittings, Brass . . . . . . . . . . . . . 831 Polyon Swage Fittings, Steel . . . . . . . . . . . . . 793 Synflex Swage Fittings, Steel . 794, 795, 796, 797 Thread Lockers, High Strength . . . . . . . . . . . . . . . . . . . . . . . . . . 1226 Medium Strength . . . . . . . . . . . . . . . . . . . . . . . 1226 Very High Strength . . . . . . . . . . . . . . . . . . . . . 1226 Thread Sealants, Teflon . . . . . . . . . . . . . . . . . . . . . . . . . 1223, 1225 Tie Rod Cylinders, Hydraulic . . . . . . . . . . 157, 158, 159, 160 Tigerflex Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 726 Spiral Double Bolt Hose Clamps . . . . . . . . . . . . 866 Tire Service Products . . . . . . . . . . . . . . . . . . . . . . . 1230 Tools, Alemite Grease Fitting Cleaner . . . . . . . . . . . . 1250 Hydraulic Punches . . . . . . . . . . . . . . . . . . . . . . . 430 Misc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1232 Oetiker Pinch Clamp Installation Pincers . . . . . . 858 STC Connector Release Tools . . . . . . . . . . . . 752 Wrenches & Pry Bars . . . . . . . . . . . . . . . . . . . . 431 Torque Wrench Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 Torque Wrenches, Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . 428, 429 Towels, Hand Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . 1229 Tractor Air Brake Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 740 Transmission/Hydraulic Fluid . . . . . . . . . . . . . . 1242 Trailer Air Brake Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 740 Transfer Hose,
T
Tandem Vane Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Tank Mounted Suction Strainers . . . . . . . . . . . . . . . . . . . . . . . . 342 Tank Truck Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723 Tape, Petrolatum Tape . . . . . . . . . . . . . . . . . . . . . . . 1227 Teflon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1225 T-Bolt Hose Clamps . . . . . . . . . . . . . . . . . . . 859, 860, 862 Teflon Back Up Rings . . . . . . . . . . . . . . . . . . . . 1198, 1199 Back-Up Ring Kits . . . . . . . . . . . . . . . . . . . . . . 1205 Hose . . . . . . . . . . . . . . . . . . . . 744, 745, 746, 1118 Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1225 Thread Sealants . . . . . . . . . . . . . . . . . . . . . . . 1223 Teflon 1 Braid Hose Fittings, Stainless Steel . . . . . . . . . . . . . . 830
1291
Product Index
Hydraulic Power & Control Product Page Product Page Petroleum . . . . . . . . . . . . . . . . . . . . . 699, 700, 723 Transmission Fluid, Automatic . . . . . . . . . . . . . . . . . . . . . . . . 1243 Fluid, Tractor . . . . . . . . . . . . . . . . . . . . . . . . . . 1242 Transmission, Pneumatic Modulator . . . . . . . . . . . . . . . . . . . . . 670 Trident Marine Bilge, Drain & Live Well Hose . . . . . . . . . . 734, 735 Constant-Torque Clamps . . . . . . . . . . . . . . . . 863 Fuel Fill Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . 733 Fuel Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 732 Sanitation Hose . . . . . . . . . . . . . . . . . . . . . . . . . 735 Steering Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 737 T-Bolt Band Clamps . . . . . . . . . . . . . . . . . . . . . 860 Water Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 736 Wet Exhaust Elbows . . . . . . . . . . . . . . . . . . . . . 731 Wet Exhaust Hose . . . . . . . . . . . . . . . 728, 729, 730 Wet Exhaust Hump Hose . . . . . . . . . . . . . . . . . 730 Truck Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 T-Seals, Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1180 Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1181 Tube Joints, Flexmaster . . . . . . . . . . . . . . . . . . 937, 938 Tube Cleaning System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1093 Tube Fittings, 37 Flare Nuts, Steel . . . . . . . . . . . . . . . . . . . . . 878 37 Flare Sleeves, Steel . . . . . . . . . . . . . . . . . . 878 Air Brake, Brass, Nylon Tubing . . . . . . . . . 909, 910 Aluminum AN Tube Fittings . . . . . . . . . . . . . . . 1135 Compression, Brass 903, 904, 905, 906, 907, 908 Flareless 7000 Series Ermeto, Steel . . . . . . . 883 Flareless, Brass . . . . . . . . . . . . . . . . . . . . . 911, 912 Flareless, Stainless Steel 895, 896, 897, 898, 899, 900 Flareless, Steel . . . . . . . . . . . . . . . . . . . . . 884, 885 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868 Metric Flareless, Stainless Steel . . . . . . . . . . . . 901 Metric Flareless, Steel . . . 886, 887, 888, 889, 890, 891, . . . . . . . . . . . . . . . . . . . . . . . . . . . . 892, 893 ORS-TF . . . . . . . . . . . . . . . . . . . . . . . . . . 880, 881 Pnuematic . . . . . . . . . . . . . . . . . . . . . 919, 920, 921 Push > Connect, Brass . . . . . . 913, 914, 915, 916 Push > Connect, Brass, Metric . . . . . . . . 922, 923 Push-In, Brass . . . . . . . . . . . . . . . . . . . . . . 917, 918 Quick > Connect, Brass . . . . . . . . . 924, 925, 926 Versil Flare . . . . . . . . . . . . . . . . . . . . . . . . . . . 879 Tubing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 927 Support Clamps . . . 1101, 1102, 1103, 1104, 1105, 1106, . . . . . . . . . . . . . . . . . . . . 1107, 1108, 1109 Tubing, Brake Line Assemblies . . . . . . . . . . . . . . . . . . . 876 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868 Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873 Polyamide Air Brake . . . . . . . . . . . . . . . . . . . . . 873 Polyethylene . . . . . . . . . . . . . . . . . . . . . . . . . . . 872 PVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874, 875 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . 871 Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 869 Steel, Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870 Vinyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874 Turbo Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741 Silicone Reducers . . . . . . . . . . . . . . . . . . . . . . 1156 Twin-Line Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 716 Tyrone Gear Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
U
UL Listed L.P. Gas Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 742 Ultraforce Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 717 Universal Control Cables . . . . . . . . . . 1212, 1213, 1214, 1215 Fittings/Couplings . . . . . . . . . . . . . . . . . . . 852, 853 Urethane Back Up Rings . . . . . . . . . . . . . . . . . . . . 1198, 1199 Back-Up Ring Kits . . . . . . . . . . . . . . . . . . . . . . 1204 Metal Clad Wiper Rings . . . . . . . . . . . . . 1183, 1184 U-Seals, Metric . . . . . . . . . . . . . . . . . . . . . . . . 1201 Wiper Rings . . . . . . . . . . . . . . . . . 1182, 1183, 1184 USCG Type A1 Marine Fuel Hose . . . . . . . . . . . . . . . . . . . . . . . 732 USCG Type A2 Marine Fuel Fill Hose . . . . . . . . . . . . . . . . . . . . . 733 U-Seals, Buna-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1179 Polyurethane . . . . . . . . . . . . . . . . . . . . . . . . . . 1177 Urethane, Metric . . . . . . . . . . . . . . . . . . . . . . . 1201 USF Swivel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 812 Utility Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1230
Fluid Conveying
V
Vacuum Gauges . . . . . . . . . . . . . . . . . . . . . . . 388, 389, 390 Value-Pak Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Valve
1292
Product Index
Product Page Product Page Hydraulic Power & Control Coils, Cartridge Valves . . . . . . . . . . . . . . . . . . . 332 Exhaust Air Mufflers . . . . . . . . . . . . . . . . . . . . . 652 Exhaust Speed Controls . . . . . . . . . . . . . . 652, 653 Housings, Vickers . . . . . . . . . . . . . . . 329, 330, 331 Manifolds, NFPA D03 Parallel . . . . . . . . . . . . . . 337 Manifolds, NFPA D05 Parallel . . . . . . . . . . . . . . 338 Power Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Subplates . . . . . . . . . . . . . . . . . . . . . . 336, 337, 338 Valves, Air Safety Pop-Off Valves . . . . . . . . . . . . . . . . . 668 Ball Valves, Brass . . . . . . . . . . . . . . . . . . . . . . . 637 Ball Valves, Bronze . . . . . . . . . . . . . . . . . . 168, 169 Ball Valves, Stainless Steel . . . . . . . . . . . . . . . . 171 Ball Valves, Steel . . . . . . . . . . . . . . . . . . . . 169, 170 Check . . . . . . . 173, 174, 175, 176, 177, 178, 179 Check Valves, Stack (Sandwich), D03 . . . . . . . 320 Counterbalance Valves . . 188, 189, 190, 191, 192, 193, . . . . . . . . . . . . . . . . . . . . 194, 195, 196, 197 Cross Port Relief . . . . . . . . . . . . . . . . . . . . 198, 201 Cushion Valves . . . . . . . . . . . . . 198, 199, 200, 201 Differential Sensing . . . . . . . . . . . . . . . . . . . . . . 289 Drain Cocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649 Flow Control Valves . 279, 280, 281, 282, 283, 286, 650, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 651 Flow Control Valves, Stack (Sandwich), D03 . . 321 Flow Control Valves, Stack (Sandwich), D05 . . 324 Gate Valves, Bronze . . . . . . . . . . . . . . . . . . . . . 293 Gauge Snubbers . . . . . . . . . . . . . . . . . . . . . . . . 391 Lock Valves . . . . . . . 181, 182, 183, 184, 185, 186 Logic Element . . . . . . . . . . . . . . . . . . . . . . . . . . 289 Manually Operated Directional Control . . .202, 203, 204, 205, 206, 207, 209, 210, 211, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 669 Needle . . . . . . . . . . . . . . . . . . . . 294, 295, 296, 297 Pilot Operated Check Valves . . 181, 182, 183, 184, 185, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 Pilot Operated Check Valves, Stack (Sandwich), D03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 Pilot Operated Check Valves, Stack (Sandwich), D05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298, 299 Pneumatic, Manually Operated . 638, 639, 640, 641 Pneumatic, Palm Button . . . . . . . . . . . . . . . . . . 638 Pneumatic, Pilot Operated . . . . . . . . . . . . . . . . . 642 Pneumatic, Solenoid Operated 643, 644, 645, 646, 647 Power Team, In-Line . . . . . . . . . . . . . . . . . . . . . 425 Power Team, Pump Mounted . . . . . . . . . . . . . . 411 Pressure Compensated Flow Controls . . .284, 285, 287, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 Pressure Compensated Flow Dividers 290, 291, 292 Pressure Reducing . . . . . . . . . . . . . . . . . . 300, 301 Pressure Reducing Valves, Stack (Sandwich), D03 320 Proportional, NFPA D03 . . . . . . . . . . 212, 213, 214 Relief Valves, Stack (Sandwich), D03 . . . . . . . . 319 Relief Valves, Stack (Sandwich), D05 . . . . . . . . 323 Relief, Direct Acting Differential Poppet, To 20 GPM 305 Relief, Direct Acting Differential Poppet, To 80 GPM 306 Relief, Direct Acting, To 10 GPM . . . . . . . . . . . . 304 Relief, Direct Acting, To 20 GPM . . . . . . . . . . . . 302 Relief, Direct Acting, To 3 GPM . . . . . . . . . . . . . 303 Relief, Guided Piston . . . . . . . . . . . . . . . . . . . . . 312 Relief, Pilot Operated, To 120 GPM . . . . . . . . . 310 Relief, Pilot Operated, To 20 GPM . . . . . . . . . . 308 Relief, Pilot Operated, To 30 GPM . . . . . . . . . . 307 Relief, Pilot Operated, To 80 GPM . . . . . . . . . . 309 Relief, Subplate Mounted, To 106 GPM . . . . . . 311 Sandwich Valves, D03 . . . . . . . . . . . . . . . . . . . . 313 Sectional Valves, Hydraulic . . . 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, . . . . 229, 230, 231, 232, 233, 234, 235, 236, 237 Selector Valves . . . . . . . . . . . . . 314, 315, 316, 317 Shuttle Valves . . . . . . . . . . . . . . . . . . . . . . 325, 326 Slip-In Cartridge Valves . . . . . . . . . . . . . . . . . . . 318 Solenoid Operated Directional Control . . .206, 207, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235, 236, 237 Solenoid Operated, Hydraulic, 2-way 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 Solenoid Operated, Hydraulic, 3-way 252, 253, 254, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 Solenoid Operated, Hydraulic, 4-way 256, 257, 258, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259, 260 Solenoid Operated, Hydraulic, NFPA D03 .261, 262, 263, . . . . . . . . . . . . . . . . . . . . 264, 265, 266, 267 Solenoid Operated, Hydraulic, NFPA D05 .268, 269, 270, . . . . . . . . . . . 271, 272, 273, 274, 275, 276 Solenoid Operated, Hydraulic, NFPA D08 . . . . . 277 Solenoid Operated, Hydraulic, NFPA D10 . . . . . 278 Stack Valves, D03 . . . . . . . . . . . 319, 320, 321, 322 Stack Valves, D05 . . . . . . . . . . . . . . . . . . . 323, 324 Truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Vane Motors, To 2875 lb-in Torque . . . . . . . . . . . . . . 149 Pumps, Double . . . . . . . . . . . . . . . . . . . . . 117, 118 Pumps, Double, To 19.5/10.5 GPM @ 1800 RPM . 116 Pumps, Single . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Pumps, Single, To 10.5 GPM @ 1800 RPM .86, 87,
1293
Product Index
Hydraulic Power & Control Product Page Product Page 88, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Pumps, Single, To 19.5 GPM @ 1800 RPM .90, 91, 92, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Pumps, Single, To 31.5 GPM @ 1800 RPM .94, 95, 96 Pumps, Single, To 57 GPM @ 1800 RPM . . . . . 97 Pumps, Single, To 90 GPM @ 1800 RPM . . 98, 99 Vee Packing Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1179 Vegetable Oil Base Hydraulic Fluid . . . . . . . . . . . . . . . . . . . . . . . . . 1241 Vents, Breather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1227 Versa-Pak Refuse Pump System . . . . . . . . . . . . . . . . . . . . 122 Versil Flare Nuts & Ferrules . . . . . . . . . . . . . . . . . . . . . . . . . 879 Vibrators, Pneumatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1232 Vickers Bolt Extenders . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Bolt Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Cartridge Valve Coils . . . . . . . . . . . . . . . . . . . . . 332 Check Valves, C2-8 . . . . . . . . . . . . . . . . . . . . . . 178 Check Valves, C5G(V)-8 . . . . . . . . . . . . . . . . . . 179 Check Valves, CV2-20-P . . . . . . . . . . . . . . . . . . 177 Check Valves, DT8P1 . . . . . . . . . . . . . . . . . . . . 176 Circuit Maker Cartridge Valve Packages . . . . . . 284 Counterbalance Valves, CBV1/2-12 . . . . . . . . . 195 Counterbalance Valves, CBV1-10 . . . . . . . . . . . 193 Cross Port Relief Valves, CRV-10 . . . . . . . . . . . 199 Directional Control Valves, DG17V-3 . . . . . . . . 203 DIRT-Gate Reservoir Vent Filters . . . . . . . . . . . 378 Double Vane Pumps, V2010 Series . . . . . . . . . 116 Filter Carts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359 Flow Control Valves . . . . . . . . . . . . . . . . . . 284, 285 Flow Control Valves, F(C)G-02/03 . . . . . . . . . . 286 Flow Control Valves, FCV7-10 . . . . . . . . . . . . . 283 Flow Divider Valves, FDC1-10 . . . . . . . . . . . . . 292 Fluid Analysis Kits . . . . . . . . . . . . . . . . . . . . . . . 360 FN Flow Control Valves . . . . . . . . . . . . . . . . . . . 280 Foot Brackets, FB . . . . . . . . . . . . . . . . . . . . . . . 130 H2O-Gate Reservoir Vent Filters . . . . . . . . . . . . 379 Manually Operated Control Valves, MPV1-10 . . 202 Mobile Gate Reservoir Filler Breathers . . . . . . . 377 Needle Valves, NV1-10 . . . . . . . . . . . . . . . . . . . 297 Pilot Operated Check Valves, DPC1-10 . . . . . . 186 Pilot Operated Check Valves, SPC1-10 . . . . . . 182 Pilot Operated Check Valves, SPC1-16 . . . . . . 184 Pilot Operated Check Valves, SPC2-10 . . . . . . 181 Piston Pumps, PVE Series . . . . . . . . . . . . . . . . 109 Piston Pumps, PVQ Series . . . . . . . . . . . . 110, 111 Power Plugs, EHH-AMP-702 . . . . . . . . . . . . . . . 340 Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374 Pressure Filters, HF2P . . . . . . . . . . . . . . . . . . . 356 Pressure Reducing Valves, PRV1-10 . . . . . . . . 300 Pressure Reducing Valves, PRV2-10 . . . . . . . . 301 Proportional Directional Valves, KDG4V-3 & KDG4V3S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212, 213 Proportional Directional Valves, KFDG4V-3 . . . 214 Relief Valves, C-175 . . . . . . . . . . . . . . . . . . . . . 303 Relief Valves, CG2V/CG5V Series . . . . . . . . . . 311 Relief Valves, CS & CT . . . . . . . . . . . . . . . . . . . 310 Relief Valves, RV1-10 . . . . . . . . . . . . . . . . . . . . 304 Relief Valves, RV2-10 . . . . . . . . . . . . . . . . . . . . 307 Relief Valves, RV3-10 . . . . . . . . . . . . . . . . . . . . 305 Relief Valves, RV3-16 . . . . . . . . . . . . . . . . . . . . 306 Relief Valves, RV5-10 . . . . . . . . . . . . . . . . . . . . 308 Relief Valves, RV5-16 . . . . . . . . . . . . . . . . . . . . 309 Return Filters, HF4RT . . . . . . . . . . . . . . . . . . . . 354 Return Filters, HS22 . . . . . . . . . . . . . . . . . . . . . 350 Return Filters, OFRS-25 . . . . . . . . . . . . . . . . . . 348 Return Filters, OFRS-60 . . . . . . . . . . . . . . . . . . 349 Sandwich Valves, D03 . . . . . . . . . . . . . . . . . . . . 313 Shuttle Valves, DSV2-8 . . . . . . . . . . . . . . . . . . . 326 Slip-In Cartridge Valves . . . . . . . . . . . . . . . . . . . 318 Solenoid Operated Directional Valves, DG4S4-01 . 268, . . . . . . . . . . . . . . . .269, 270, 271, 275, 276 Solenoid Operated Directional Valves, DG4V3 . 266, 267 Solenoid Operated Directional Valves, DG4V-3 & DG4V-3S . . . . . . . . . . . .261, 262, 263, 264, 265 Solenoid Operated Directional Valves, DG4V-5 273, 274 Solenoid Operated Directional Valves, DG5V-10 278 Solenoid Operated Directional Valves, DG5V-8 277 Solenoid Operated Directional Valves, DGVS4-01 . 272 Solenoid Valves, SBV11-10-C . . . . . . . . . . . . . . 242 Solenoid Valves, SBV11-10-O . . . . . . . . . . . . . . 248 Solenoid Valves, SV1-10-3 . . . . . . . . . . . . . . . . 255 Solenoid Valves, SV1-10-4 . . . . . . . . . . . . . . . . 256 Solenoid Valves, SV1-10-C . . . . . . . . . . . . . . . . 241 Solenoid Valves, SV1-16-C . . . . . . . . . . . . . . . . 243 Solenoid Valves, SV1-8-3 . . . . . . . . . . . . . . . . . 252 Solenoid Valves, SV2-20-C . . . . . . . . . . . . . . . . 244 Solenoid Valves, SV3-10-C . . . . . . . . . . . . . . . . 240 Solenoid Valves, SV3-10-O . . . . . . . . . . . . . . . . 247 Solenoid Valves, SV3-12-O . . . . . . . . . . . . . . . . 249 Solenoid Valves, SV3-16-O . . . . . . . . . . . . . . . . 250 Solenoid Valves, SV3-20-O . . . . . . . . . . . . . . . . 251 Solenoid Valves, SV4-10-3 . . . . . . . . . . . . . . . . 254 Solenoid Valves, SV4-10-C . . . . . . . . . . . . . . . . 238 Solenoid Valves, SV4-10-O . . . . . . . . . . . . . . . . 245 Solenoid Valves, SV4-8-3 . . . . . . . . . . . . . . . . . 253 Solenoid Valves, SV5-8-C . . . . . . . . . . . . . . . . . 239
Fluid Conveying
1294
Product Index
Product Page Product Page Hydraulic Power & Control Solenoid Valves, SV5-8-O . . . . . . . . . . . . . . . . . 246 Solenoid Valves, SV9-10 . . . . . . . . . . . . . . 259, 260 Solenoid Valves, SV9-8 . . . . . . . . . . . . . . . 257, 258 Subplates, DGVM . . . . . . . . . . . . . . . . . . . . . . . 337 SystemStak Valves, D03 . . . . 319, 320, 321, 322 SystemStak Valves, D05 . . . . . . . . . . . . 323, 324 Valve Housings . . . . . . . . . . . . . . . . . 329, 330, 331 Vane Motors, 35M Series . . . . . . . . . . . . . . . . . 149 Vane Pumps, 25V Series . . . . . . . . . . . . . . . . . . 94 Vane Pumps, 25VQ Series . . . . . . . . . . . . . . 95, 96 Vane Pumps, 35VQ Series . . . . . . . . . . . . . . . . . 97 Vane Pumps, 45VQ Series . . . . . . . . . . . . . . 98, 99 Vane Pumps, V10 Series . . . . . . . . . . . . . . . 86, 87 Vane Pumps, V10F Series . . . . . . . . . . . . . . 88, 89 Vane Pumps, V20 Series . . . . . . . . . . . . . . . 90, 91 Vane Pumps, V20F Series . . . . . . . . . . . . . . 92, 93 Vinyl Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 874 Viton O-Ring Assortment Kits . . . . . . . . . . . . . . . . . . 1202 O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1197 Voss Adapters, BSPP to 37 Flare, Steel . . . .1008, 1009, 1010 Adapters, BSPP to Metric, Steel . . . . . . . . . . . 1012 Adapters, BSPP to Pipe, Steel . . . . . . . . . . . . 1011 Adapters, BSPP, Steel . . . . . . . . 1015, 1016, 1017 Adapters, BSPT to 37 Flare, Steel . . . . . . . . . 1019 Adapters, BSPT to Pipe, Steel . . . . . . . . . . . . 1018 Adapters, JIS, Steel . . . . . . . . . . . . . . . . . . . . . 1020 Adapters, Metric to 37 Flare, Steel . . . .1003, 1004, 1005 Adapters, Metric to Pipe . . . . . . . . . . . . . . . . . 1006 Adapters, Metric, Steel . . . . . . . . . . . . . . . . . . 1007 BSP & Metric Bonded Seals . . . . . . . . . . . . . . 1094 Metric Copper Washers . . . . . . . . . . . . . . . . . . 1094 Metric Flareless Tube Fittings, Steel 886, 887, 888, 889, . . . . . . . . . . . . . . . . . . . . 890, 891, 892, 893 Pressure Test Systems . . . . . . . . . . . . . . . . . . . 401 Pressure Washer . . . . . . . . . . . . . . . . . . . . . . . 1236 Ward Malleable Iron Pipe Fittings . . . . . . . . 930, 931, 932 Water Hose . . . . . . . 717, 720, 721, 722, 723, 733, 1117 Hose, Marine . . . . . . . . . . . . . . . . . . . 735, 736, 737 Hose, Marine Sanitation . . . . . . . . . . . . . . . . . . 735 Pumps, Air-Operated Diaphragm . . . . . . . 126, 127 Suction & Discharge Couplers . . . . . . 847, 848, 849 Valves, Plug Type . . . . . . . . . . . . . . . . . . . 298, 299 Y Strainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1229 Water Blast Quick Disconnects . . . . . . . . . . . . . . . . . . . . . . 1082 Water Cooled Heat Exchangers . . . . . . . . . . . . 394, 395, 396, 397 Water Discharge Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 724, 726 Hose Assemblies . . . . . . . . . . . . . . . . . . . . . . . . 751 Water Pump Foot Valves, Strainers, Skimmers . . . . . . . . . . . 131 Water Removal Filter Elements . . . . . . . . . . . . . . . . . . . . . . 349, 350 Water Suction & Discharge Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 726 Hose Assemblies . . . . . . . . . . . . . . . . . . . . . . . . 750 Watts Gate Valves, Bronze . . . . . . . . . . . . . . . . . . . . . 293 Wear Rings, Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1182 Wedgie Cylinders, High Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410 Weld Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 939 Welded Hydraulic Cylinders . . . . . . . . . . . . . . . . . . 160, 161 Welding Bungs, Aluminum . . . . . . . . . . . . . . . . . . . . . . . 1142 Wet Exhaust Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 731 Hose . . . . . . . . . . . . . . . . . . . . . . . . . 728, 729, 730 Hump Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 730 Wheels, Steering . . . . . . . . . . . . . . . . . . . . . . . 162, 163, 164 Williams Air Controls . . . . . . . . . . . . . . . . . . . . . . . . 669, 670 Winches, Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1237 Winzeler Hose Ferrules . . . . . . . . . . . . . . . . . . . . . . . . . . 867 Wiper Rings, Metal Clad Rubber . . . . . . . . . . . . . . . . . . . . . . 1183 Metal Clad Urethane . . . . . . . . . . . . . . . 1183, 1184 Urethane . . . . . . . . . . . . . . . . . . . 1182, 1183, 1184
W
Walvoil DFE Selector Valves . . . . . . . . . . . . . . . . . . . . . SD11 Monoblock Valves . . . . . . . . . . . . . . . . . . SD16 Sectional Valves . . . . . . . . . . . 231, 232, SD25 Sectional Valves . . . . . . . 234, 235, 236, SD4 Monoblock Valves . . . . . . . . . . . . . . . . . . . SD5 Monoblock Valves . . . . . . . . . . . . . . . . . . . SD6 Sectional Valves . . . . . . . . 215, 216, 217, SD8 Sectional Valves . . . . . . . . 221, 222, 223, SDS150 Sectional Valves . . . . . 225, 226, 227, Wands, 317 207 233 237 205 206 218 224 228
1295
Product Index
Hydraulic Power & Control Product Page Product Page Wire Ties 1233 Womack Fluid Power Textbooks . . . . . . . . . . . . . . . . . . 1231 World Wide Fittings, Flareless Tube Fittings, Steel . . . . . . . . . . 884, 885 Worm Gear Hose Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 855 Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1237 Wrenches, Power Team . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
X
X-FLEX Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710
Y
Y Strainers, Cast Bronze . . . . . . . . . . . . . . . . . . . . . . . . . . . 1229
Z
Zinc Instant Cold Galvanize . . . . . . . . . . . . . . . . . . 1247 Zip Ties 1233
Fluid Conveying
1296
Model Number Index

Model Number Page Model Number Page Model Number Page Model Number Page Model Number Page
0-9
000180 . . . . . . . . . . . 389 000-35000-0120 . . 1219 000-39003-0001 . . 1221 000-39042-0000 . . 1221 000-39064-0001 . . 1221 0003922-106 . . . . . . 155 0003922-109 . . . . . . 155 0003931-090 . . . . . . 156 0003933-003 . . . . . . 156 000-49003-0001 . . 1221 000-49003-0002 . . 1221 000-49003-0003 . . 1221 000-49004-0001 . . 1222 000-49004-0003 . . 1222 000-49006-0000 . . 1221 000-49007-0000 . . 1221 000-49008-0001 . . 1221 000-49042-0000 . . 1221 000-50036-0001 . . 1222 000-59112-0000 . . 1222 0006405-000 . . . . . . 143 0006406-000 . . . . . . 143 0006422-272 . . . . . . 155 0006433-034 . . . . . . 156 000-69003-0001 . . 1221 000-69003-0003 . . 1221 000-69007-0000 . . 1221 0007360-001 . . 134, 137 0007360-002 . . 134, 137 0007382-000 . . . . . . 140 0007464-000 . . 134, 137 0008484-000 . . . . . . 143 0008573-004 . . . . . . 143 0008826-000 . . . . . . 155 000-89003-0002 . . 1221 0008958-000 . . . . . . 143 0009001-002 . . . . . . 143 0009001-003 . . . . . . 143 0009001-004 . . . . . . 143 0009002-004 . . . . . . 143 0009057-001 . . 134, 137 0009057-009 . . . . . . 140 0009057-014 . . 134, 137 0009091-001 . . 134, 137 0009121-001 . . . . . . 140 0009121-002 . . 134, 137 001262 . . . . . . . . . . . 388 001279 . . . . . . . . . . . 388 0014163-000 . . . . . . 140 0014193-000 . . 134, 137 0014392-006 . . . . . . 140 0014394-007 . . . . . . 142 0016292-088 . . 134, 137 001705 . . . . . . . . . . . 118 0021084-000 . . . . . . 163 0021371-008 . . . . . . 140 0021371-012 . . . . . . 140 0021618-001 . . . . . . 140 0021618-002 . . . . . . 140 0021618-003 . . . . . . 140
0021618-004 . . . . . . 140 0021618-005 . . . . . . 140 0022000-001 . . 134, 137 0022000-002 . . 134, 137 0022002-000 . . 134, 137 0022102-000 . . . . . . 140 0023310-001 . . . . . . 141 0023310-002 . . . . . . 141 003495 . . . . . . . . . . . 388 003501 . . . . . . . . . . . 388 003518 . . . . . . . . . . . 388 003525 . . . . . . . . . . . 388 003532 . . . . . . . . . . . 388 003549 . . . . . . . . . . . 389 003556 . . . . . . . . . . . 389 003570 . . . . . . . . . . . 389 003587 . . . . . . . . . . . 388 003594 . . . . . . . . . . . 388 003600 . . . . . . . . . . . 390 003624 . . . . . . . . . . . 389 0060023-000 . . . . . . 134 0060026-000 . . . . . . 137 0060036-000 . . . . . . 134 0060533-000 . . . . . . 137 0060539-000 . . . . . . 137 0060540-000 . . . . . . 134 0061234-000 . . . . . . 141 0061236-000 . . . . . . 141 0061237-000 . . . . . . 142 0061238-000 . . . . . . 142 0061252-000 . . . . . . 140 0061258-000 . . . . . . 140 0061259-000 . . . . . . 140 0061263-000 . . . . . . 140 0061281-000 . . . . . . 141 0061289-000 . . . . . . 140 0064418-000 . . . . . . 162 0064466-000 . . . . . . 162 0064470-000 . . . . . . 162 0064500-000 . . . . . . 164 0070122-902 . . . . . . 113 009955 . . . . 94, 96, 116 016662 . . . . . . . . . . . . 91 01E* . . . . . . . . . . . . . 355 0201837-001 . . . . . . 142 0201837-002 . . . . . . 142 02085 . . . . . . . . . . . 1247 02-101726 . . . . . . . . 265 02-101728 . . . . . . . . 265 02-101731 . . . . . . . . 265 02-101733 . . . . . . . . 265 02-102535 . . . . . . . . . 94 02-102555 . . . . . . . . 118 02-109025 . . . . . . . . 261 02-109026 . . . . . . . . 261 02-109030 . . . . . . . . 263 02-109047 . . . . . . . . 262 02-109048 . . . . . . . . 262 02-109055 . . . . . . . . 261 02-109563 . . . . . . . . 263 02-109573 . . . . . . . . 262 02-109575 . . . . . . . . 261 02-109628 . . . . . . . . 262
02-109632 . . . . . . . . 263 02-109642 . . . . . . . . 263 02-109686 . . . . . . . . 261 02-109693 . . . . . . . . 263 02-109696 . . . . . . . . 263 02-109824 . . . . . . . . 262 02-109826 . . . . . . . . 261 02-109940 . . . . . . . . 263 02-112763 . . . . . . . . 184 02-113005 . . . . . . . . 283 02-119461 . . . . . . . . 269 02-119475 . . . . . . . . 269 02-119489 . . . . . . . . 269 02-119593 . . . . . . . . 268 02-119859 . . . . . . . . 269 02-125443-7 . . . . . . 100 02-125553-* . . . . . . . 100 02-126196 . . . . . . . . 270 02-126360 . . . . . . . . 269 02-126361 . . . . . . . . 269 02-127608 . . . . . . . . 269 02-135316 . . . . . . . . 203 02-137117-* . . . . . . . . 94 02-137210-2 . . . . . . 117 02-137560 . . . . . . 91, 93 02-137563 . . . . . . 91, 93 02-137565 . . . . . . 91, 93 02-137567 . . . . . . 91, 93 02-137934 . . . . . . . . 264 02-138605 . . . . . . . . 321 02-141809-5 . . . . . . . 92 02-141854-* . . . . . . . . 92 02-142081-1 . . . . . . 117 02-142081-F . . . . . . 117 02-142388-* . . . . . . . . 92 02-144938 . . . . . . . . 262 02-144939 . . . . . . . . 262 02-144943 . . . . . . . . 262 02-145150 . . . . . . . . 262 02-145158 . . . . . . . . 262 02-145182 . . . . . . . . 262 02-145188 . . . . . . . . 262 02-145190 . . . . . . . . 262 02-145192 . . . . . . . . 262 02-148363 . . . . . . . . 213 02-154277 . . . . . . . . 212 02-154278 . . . . . . . . 213 02-156365 . . . . . . . . 318 02-160645 . . . . . . . . 329 02-160691 . . . . . . . . 332 02-160731 . . . . . . . . 329 02-160742 . . . . . . . . 330 02-160755 . . . . . . . . 326 02-160759 . . . . . . . . 239 02-160761 . . . . . . . . 246 02-160771 . . . . . . . . 252 02-160830 . . . . . . . . 193 02-160853 . . . . . . . . 194 02-161199 . . . . . . . . 182 02-161311 . . . . . . . . 249 02-161382 . . . . . . . . 329 02-161405 . . . . . . . . 329 02-164209 . . . . 284, 308
02-164222 . . . . 284, 308 02-164723 . . . . 284, 308 02-165669 . . . . . . . . 285 02-165713 . . . . . . . . 284 02-170743 . . . . . . . . 301 02-171239 . . . . . . . . 326 02-171990 . . . . 193, 313 02-172086 . . . . . . . . 195 02-173219 . . . . . . . . 193 02-175554 . . . . . . . . 306 02-177579 . . . . . . . . 248 02-177580 . . . . . . . . 242 02-178078 . . . . . . . . 332 02-178079 . . . . . . . . 332 02-178104 . . . . . . . . 332 02-178106 . . . . . . . . 332 02-178109 . . . . . . . . 332 02-178269 . . . . . . . . 330 02-178276 . . . . . . . . 284 02-178481 . . . . . . . . 199 02-179226 . . . . . . . . 260 02-185347 . . . . . . . . 313 02-186730 . . . . . . . . 258 02-198050 . . . . . . . . 253 02-198685 . . . . . . . . 258 02-199325 . . . . . . . . 259 02-199329 . . . . . . . . 259 02-300110 . . . . . . . . 275 02-306253-* . . . . . . . 88 02-309085 . . . . . . . . 349 02-309901 . . . . . . . . 213 02-311985 . . . . . . . . 213 02-317856 . . . . . . . . 212 02-321785 . . . . . . . . 278 02-326010 . . . . . . . . 340 02-336791 . . . . . . . . 270 02-339884 . . . . . . . . 272 02-341552 . . . . . . . . 110 02-341576 . . . . . . . . 110 02-341685 . . . . . . . . 110 02-341826 . . . . . . . . 109 02-343827 . . . . . . . . 277 02-354934 . . . . . . . . 263 02-354935 . . . . . . . . 263 02-361787 . . . . . . . . 348 02-361809 . . . . . . . . 348 02-363653 . . . . . . . . 266 02-363741 . . . . . . . . 272 02-391668 . . . . . . . . 267 02-465603-5 . . . . . . 116 02-466554-1 . . . . . . . 88 02-466580-1 . . . . . . . 88 03005 . . . . . . . . . . 1246 03040 . . . . . . . . . . 1247 0304-C-* . . . . . . . . . 986 03050 . . . . . . . . . . 1247 0306-* . . . . . . . . . . . 972 03060 . . . . . . . . . . 1247 03080 . . . . . . . . . . 1247 03130 . . . . . . . . . . 1246 03175 . . . . . . . . . . 1247 03176 . . . . . . . . . . 1246 03282 . . . . . . . . . . 1247
03-32-00032 . . . . . .1230 03-32-00033 . . . . . .1230 03-32-00034 . . . . . .1230 03-32-00074 . . . . . .1230 038441 . . . . . . . . . . . .97 05089 . . . . . . . . . . .1248 05557 . . . . . . . . . . .1248 055887-000000 . . . .1222 06077 . . . . . . . . . . .1247 068933 . . . . . . . . . . .389 07.421-* . . . . . . . . . .805 082-* . . . . . . . . . . . .1094 08HUU-4LASL . . . .1237 094029 . . . . . . . . . . .178 094043 . . . . . . . . . . .178 1.065 . . . . . . . . . . . . .869 1.109-SS . . . . . . . . . .871 1.120 . . . . . . . . . . . . .869 1/2.049 . . . . . . . . . . .869 1/2.049-SS . . . . . . . .871 1/2.065 . . . . . . . . . . .869 1/2.065-SS . . . . . . . .871 1/2.083 . . . . . . . . . . .869 1/2-90ELBOW . . . . . .931 1/2-90STREETEL . . .931 1/2-CAP . . . . . . . . . .932 1/2-COUPLING . . . . .930 1/2-PLUG . . . . . . . . .932 1/2-STEEL-COUPLING . 933 1/2-TEE . . . . . . . . . . .931 1/2-UNION . . . . . . . .931 1/2X* . . . . . . . . . . . . .934 1/2X*-80 . . . . . . . . . .935 1/2X*-B . . . . . . . . . . .936 1/2X-*B . . . . . . . . . . .936 1/2X*-BELLRDCR . . .930 1/2X*-HEXBUSH . . . .930 1/4.035 . . . . . . . . . . .869 1/4.035-SS . . . . . . . .871 1/4.049 . . . . . . . . . . .869 1/4.049-SS . . . . . . . .871 1/4-90ELBOW . . . . . .931 1/4-90STREETEL . . .931 1/4-CAP . . . . . . . . . .932 1/4-PLUG . . . . . . . . .932 1/4-STEEL-COUPLING . 933 1/4-TEE . . . . . . . . . . .931 1/4X* . . . . . . . . . . . . .934 1/4X*-80 . . . . . . . . . .934 1/4X*-B . . . . . . . . . . .936 1/4X*-BELLRDCR . . .930 1/4X*-HEXBUSH . . . .930 1/8-90ELBOW . . . . . .931 1/8-90STREETEL . . .931 1/8-PLUG . . . . . . . . .932 1/8-STEEL-COUPLING . 933 1/8X* . . . . . . . . . . . . .934 1/8X*-80 . . . . . . . . . .934 1/8X*-B . . . . . . . . . . .936 100 1008AL * . . . . . .389
1297
Model Number Index

Model Number Page Model Number Page Model Number Page Model Number Page Model Number Page 100 1008SL * . . . . . . 389 100-* . . . . . . . . . . . . 736 100025 . . . . . . . . . . 1101 100025-4-656 . . . . 1101 100031 . . . . . . . . . . 1101 100037 . . . . . . . . . . 1101 100037-4-656 . . . . 1101 100050 . . . . . . . . . . 1101 100050-4-656 . . . . 1101 100062 . . . . . . . . . . 1101 100075 . . . . . . . . . . 1101 100075-4-656 . . . . 1101 100087 . . . . . . . . . . 1101 100100 . . . . . . . . . . 1101 100112 . . . . . . . . . . 1101 100125 . . . . . . . . . . 1101 100125-4-656 . . . . 1101 100150 . . . . . . . . . . 1101 10-0810-00 . . . 736, 874 100X* . . . . . . . . . . . . 902 101-* . . . . . . . . . . . . 133 10100008 . . . . . . . . . 856 10100011 . . . . . . . . . 856 10100016 . . . . . . . . . 856 10100019 . . . . . . . . . 856 10100024 . . . . . . . . . 856 10100027 . . . . . . . . . 856 10100030 . . . . . . . . . 856 10100032 . . . . . . . . . 856 10100034 . . . . . . . . . 856 101-1126 . . . . . . . . . 735 101-1786 . . . . . . . . . 735 10-1216-00 . . . 736, 874 10-1620-00 . . . 736, 874 101A140-03 . . . . . . . 390 101A164-01 . . . . . . . 390 102-0202 . . . . . . . . . 839 102-0204 . . . . . . . . . 839 102-0302 . . . . . . . . . 839 102-0402 . . . . . . . . . 839 102-0404 . . . . . . . . . 839 102-0406 . . . . . . . . . 839 102-0502 . . . . . . . . . 839 102-0504 . . . . . . . . . 839 102-0506 . . . . . . . . . 839 102-0602 . . . . . . . . . 839 102-0604 . . . . . . . . . 839 102-0606 . . . . . . . . . 839 102-0608 . . . . . . . . . 839 102-0804 . . . . . . . . . 839 102-0806 . . . . . . . . . 839 102-0808 . . . . . . . . . 839 102-0812 . . . . . . . . . 839 102-1006 . . . . . . . . . 839 102-1008 . . . . . . . . . 839 102-1012 . . . . . . . . . 839 102-1208 . . . . . . . . . 839 102-1212 . . . . . . . . . 839 102-1612 . . . . . . . . . 839 102-1616 . . . . . . . . . 839 1022 . . . . . . . . . . . . . 432 1023 . . . . . . . . . . . . . 432 1027 . . . . . . . . . . . . . 432 103-* . . . . . . . . . . . . 136 103-1010 . . . . . . . . . 136 103-1039 . . . . . . . . . 136 1038 . . . . . . . . . . . . . 432 104-* . . . . . . . . 139, 140 104-001 . . . . . . . . . . 889 104-0404 . . . . . . . . . 840 104-0504 . . . . . . . . . 840 104-051 . . . . . . . . . . 889 104-0604 . . . . . . . . . 840 104-0606 . . . . . . . . . 840 104-0806 . . . . . . . . . 840 104094 . . . . . . . 651, 659 1041 . . . . . . . . . . . . . 432 104104-* . . . . . . . . . 651 104-151 . . . . . . . . . . 889 1042 . . . . . . . . . . . . . 432 104-201 . . . . . . . . . . 889 104-351 . . . . . . . . . . 889 104408 . . . . . . . 658, 660 1046 . . . . . . . . . . . . . 432 104-751 . . . . . . . . . . 889 105-* . . . . . . . . . . . . 140 106-* . . . . . . . . 139, 140 106-001 . . . . . . . . . . 889 106-051 . . . . . . . . . . 889 106-101 . . . . . . . . . . 889 106-1013 . . . . . . . . . 139 106-151 . . . . . . . . . . 889 106-251 . . . . . . . . . . 889 1062DVS-* . . . . . . . . 634 106-301 . . . . . . . . . . 889 106-501 . . . . . . . . . . 889 106-551 . . . . . . . . . . 889 106-651 . . . . . . . . . . 889 106-751 . . . . . . . . . . 889 106-801 . . . . . . . . . . 889 106-851 . . . . . . . . . . 889 1080 . . . . . . . . . . . . . 939 10804 . . . . . . . . . . . . 419 10805 . . . . . . . . . . . . 419 10806 . . . . . . . . . . . . 419 108MS-6-5B . . . . . . 832 108MS-6-6B . . . . . . 832 109-* . . . . . . . . . . . . 141 1-1/2-90ELBOW . . . 931 1-1/2-90STREETEL . 931 1-1/2-CAP . . . . . . . . 932 1-1/2-COUPLING . . 930 1-1/2-PLUG . . . . . . . 932 1-1/2-STEEL-COUPLING 933 1-1/2-TEE . . . . . . . . 931 1-1/2-UNION . . . . . . 931 1-1/2X* . . . . . . . . . . . 934 1-1/2X*-80 . . . . . . . . 935 1-1/2X*-BELLRDCR 930 1-1/2X*-HEXBUSH . 930 1-1/4.095 . . . . . . . . . 869 1-1/4.120 . . . . . . . . . 869 1-1/4.120-SS . . . . . . 871 1-1/4-45STREET/ELBOW . . . . . . . . . . . . 931 1-1/4-90ELBOW . . . 931 1-1/4-90STREETEL 931 1-1/4-CAP . . . . . . . . 932 1-1/4-COUPLING . . 930 1-1/4-PLUG . . . . . . . 932 1-1/4-STEEL-COUPLING 933 1-1/4-TEE . . . . . . . . 931 1-1/4-UNION . . . . . . 931 1-1/4X* . . . . . . . . . . 934 1-1/4X*-80 . . . . . . . . 935 1-1/4X*-BELLRDCR 930 1-1/4X*-HEXBUSH . 930 1107X* . . . . . . . . . . . 914 1110X* . . . . . . . . . . . 902 112-* . . . . . . . . . . . . 142 112-001 . . . . . . . . . . 887 112-051 . . . . . . . . . . 887 112-101 . . . . . . . . . . 887 112-1063 . . . . . . . . . 142 112-151 . . . . . . . . . . 887 1123 . . . . . . . . . . . . 432 112-501 . . . . . . . . . . 887 112-551 . . . . . . . . . . 887 1125DV-* . . . . . . . . . 630 112-601 . . . . . . . . . . 887 112-651 . . . . . . . . . . 887 1127 . . . . . . . . . . . . 432 112-751 . . . . . . . . . . 887 112-801 . . . . . . . . . . 887 112-901 . . . . . . . . . . 887 113-* . . . . . . . . . . . . 142 114088 . . . . . . . . . . 176 116218-* 643, 645, 647, . . . . . . . . . . . . . . . . . 648 1162X* . . . . . . . . . . . 913 1162x*M . . . . . . . . . 922 1162X5 . . . . . . . . . . 913 1164x* . . . . . . . . . . . 915 1164X*M . . . . . . . . . 923 1164X5 . . . . . . . . . . 915 1165X* . . . . . . . . . . . 915 1165X5 . . . . . . . . . . 915 116647-* 643, 645, 648 1166X* . . . . . . . . . . . 914 1168X* . . . . . . . . . . . 914 1168X*A . . . . . . . . . 914 1168X*MX*PT . . . . . 922 1168X*X* . . . . . . . . . 914 1168X5 . . . . . . . . . . 914 1168X5X4 . . . . . . . . 914 1169X* . . . . . . . . . . . 915 1169X*AS . . . . . . . . 915 1169X*MX*PTS . . . . 923 1169X*S . . . . . . . . . 915 1169X*X*S . . . . . . . 915 1171X*S . . . . . . . . . 916 1171X*X*S . . . . . . . 916 1172X*S . . . . . . . . . 916 1172X*X*S . . . . . . . 916 117378 . . . . . . . . . . 176 1174X* . . . . . . . . . . . 913 117555-* . . . . . . . . . 633 118597-2 . . . . . . . . . 646 118598-4 . . . . . . . . . 646 119-* . . . . . . . . . . . . 143 1193-* . . . . . . . . . . . 891 119307-* . . . . . . . . . 650 119309-* . . . . . . . . . 650 120-101 . . . . . . . . . . 887 120128 . . . . . . . . . . . 96 120-251 . . . . . . . . . . 887 120-601 . . . . . . . . . . 887 121-* . . . . . . . . . . . . 143 121048-1-203 . . . . 1101 121048-6-101 . . . . 1101 123-* . . . . . . . . . . . . 138 124-* . . . . . . . . . . . . 840 125667 . . . . . . . . . . 176 125670 . . . . . . . . . . 176 129-* . . . . . . . . . . . . 135 1290-*S . . . . . . . . . . 878 12FOP . . . . . . . . . . 1091 12FOPX . . . . . . . . 1091 12SFO . . . . . . . . . . 1097 12SFXO . . . . . . . . 1097 1300027 366, 367, 371 1300028 . . . . . 366, 367 1300039 . . . . . 366, 367 1300125 . . . . . 366, 367 1300127 . . . . . . . . . 369 1300129 . . . . . . . . . 369 1300131 . . . . . . . . . 369 1300133 . . . . . . . . . 369 1300135 . . . . . 366, 367 1300171 366, 367, 371 1300172 366, 367, 371 1300174 366, 367, 371 1300176 366, 367, 371 1300177 . . . . . . . . . 369 1300178 . . . . . . . . . 369 1300179 . . . . . . . . . 369 1300181 . . . . . . . . . 369 1300183 . . . . . . . . . 369 1300187 . . . . . . . . . 369 1300191 . . . . . 366, 371 1300209 . . . . . . . . . 366 1300268 . . . . . . . . . 369 1300284 . . . . . 366, 367 1300329 . . . . . . . . . 369 1300382 . . . . . . . . . 373 1300618 366, 367, 371 1300619 366, 367, 371 1300637 . . . . . . . . . 393 1300727 . . . . . . . . . 367 1300740 . . . . . . . . . 367 1300743 . . . . . . . . . 367 1300744 . . . . . . . . . 367 1300751 . . . . . . . . . 364 1300754 . . . . . . . . . 363 1300757 . . . . . . . . . 363 1300843 . . . . . . . . . 369 1300878 . . . . . . . . . 372 1300908 . . . . . . . . . 371 1300937 366, 367, 372 1300938 366, 367, 372 1300939 .366, 367, 371 1300985 . . . . . . . . . .367 1303176 . . . . . 366, 367 1303178 . . . . . 366, 367 1303193 . . . . . . . . . .101 1303534 . . . . . . . . . .371 1303549 . . . . . . . . . .371 1303569 . . . . . . . . . .372 1303570 . . . . . . . . . .372 1303649 . . . . . . . . . .371 1303650 . . . . . . . . . .371 1303661 . . . . . . . . . .371 1303720 . . . . . . . . . .369 1303725 . . . . . . . . . .369 130C-L . . . . . . . . . . .298 131812 . . . . . . . . . . .118 131X* . . . . . . . . . . .1055 134-* . . . . . . . . . . . . .888 1340 . . . . . . . . . . . .1040 1342 . . . . . . . . . . . .1040 1344 . . . . . . . . . . . .1040 1345 . . . . . . . . . . . .1040 1346 . . . . . . . . . . . .1040 134-601 . . . . . . . . . . .888 1350X* . . . . . . . . . .1049 1351 . . . . . . . . . . . .1040 14010 . . . . . . . . . . .1248 1404-*-* . . . . . . 953, 954 1405-*-* . . . . . . . . . . .954 14055 . . . . . . . . . . .1248 14056 . . . . . . . . . . .1248 14095 . . . . . . . . . . .1247 14100083 . . . . . . . . .858 14100118 . . . . . . . . .858 1413A-F136 . . . . . . .108 1413A-F137 . . . . . . .108 14170 . . . . . . . . . . .1246 142843 . . . . . . . . 87, 89 143-* . . . . . . . . . . . . .840 144-* . . . . . . . . 734, 840 14408 . . . . . . . . . . .1246 14411 . . . . . . . . . . .1246 1-45STREET/ELBOW . . . 931 1460X* . . . . . . . . . . .909 1462X* . . . . . . . . . . .910 1468X* . . . . . . . . . . .910 1469X* . . . . . . . . . . .910 147-* . . . . . . . . . . . . .734 148-* . . . . . . . . . . . . .735 148423 . . . . . . . . . . . .87 15.063-* . . . . . . . . .1003 15.163-* . . . . . . . . .1003 1501-*-* . . . . . . . . . . .957 1502-*-* . . . . . . . . . . .958 1503-*-* . . . . . . . . . . .955 1504TR . . . . . . . . . . .157 1506MC3E1BB 103, 146 1506TR . . . . . . . . . . .157 1508TR . . . . . . . . . . .157 15100004 . . . . . . . . .856 15100006 . . . . . . . . .856 15100007 . . . . . . . . .856
Fluid Conveying
1298
Model Number Index

15100009 . . . . . . . . . 856 15100010 . . . . . . . . . 856 15100012 . . . . . . . . . 856 15100013 . . . . . . . . . 856 15100014 . . . . . . . . . 856 15100023 . . . . . . . . . 856 1510073-BOM . . . . . 365 1510KC3A1AB . . . . . 102 1510MC3E1BB 103, 146 1512MC3E1BB 103, 146 1512MC3G1BB 103, 146 1512TR . . . . . . . . . . 157 1515KC3A1AB . 102, 145 158-* . . . . . . . . . . . . 893 1582-* . . . . . . . . . . . 752 158630 . . . . . . . . . . . . 99 16232-22 . . . . . . . . . 113 16253-16 . . . . . . . . . 113 16253-18 . . . . . . . . . 113 16700010 . . . . . . . . . 857 16700013 . . . . . . . . . 857 16700016 . . . . . . . . . 857 16700020 . . . . . . . . . 857 16700026 . . . . . . . . . 857 16700031 . . . . . . . . . 857 16700035 . . . . . . . . . 857 16701009 . . . . . . . . . 857 16FOP . . . . . . . . . . 1091 16FOPX . . . . . . . . . 1091 16SFO . . . . . . . . . . 1097 16SFXO . . . . . . . . . 1097 170011012 . . . 205, 207, 216 170012015 . . . . . . . . 216 170012020 . . . 208, 222, 226, . . . . . . . . . . . . . 232 170013025 . . . 208, 216, 222, . . . . 226, 232, 236 178-* . . . . . . . . . . . . 841 17800175 . . . . . . . . . 861 17800178 . . . . . . . . . 861 17800180 . . . . . . . . . 861 17800182 . . . . . . . . . 861 17800184 . . . . . . . . . 861 17800185 . . . . . . . . . 861 17800186 . . . . . . . . . 861 17800188 . . . . . . . . . 861 1803 . . . . . . . . . . . . 1065 1803-* . . . . . . . . . . . 998 1804-* . . . . . . . . . . . 998 1815 . . . . . . . . . . . . 1064 1816 . . . . . . . . . . . . 1064 184-* . . . . . . . . . . . . 890 18412 . . . . . . . . . . . 1247 18500060 . . . . . . . . . 858 18500064 . . . . . . . . . 857 1857 . . . . . . . . . . . . 1064 1858 . . . . . . . . . . . . 1064 1862X* . . . . . . . . . . . 924 1864X* . . . . . . . . . . . 926 1865X* . . . . . . . . . . . 925 1868X* . . . . . . . . . . . 925 1868X*X* . . . . . . . . . 925
1869X*S . . . . . . . . . 926 1869X*X*S . . . . . . . . 926 1872X*S . . . . . . . . . 926 1872X*X*S . . . . . . . . 926 1874X*X* . . . . . . . . . 924 1880X* . . . . . . . . . . . 925 1880X*X* . . . . . . . . . 925 189-* . . . . . . 1007, 1017 190000-*S . . . . . . . . 802 190111-*S . . . 803, 1131 190235-*S . . . 804, 1131 190260-*S . . . . . . . . 803 190261-*S . . . 803, 1131 190265-*S . . . 802, 1131 190295-*S . . . . . . . . 803 190296-*S . . . 803, 1131 190297-*S . . . 802, 1131 190299-*S . . . . . . . . 802 190301-*S . . . . . . . . 803 190302-*S . . . . . . . . 803 190327-*S . . . . . . . . 810 190328-*S . . . . . . . . 810 190362 . . . . . . . . . . . . 94 190371-*S . . . 804, 1131 190516-*S . . . 810, 1125 190600-*C . . . 830, 1128 190600-*S . . . 813, 1128 190718-*S . . . . . . . . 814 190772-*S . . . 814, 1128 190773-*S . . . 813, 1128 190950-*S . . . 815, 1130 1-90ELBOW . . . . . . 931 1-90STREETEL . . . . 931 191321-*S . . . 810, 1125 191400 . . . . . . . . . 94, 96 1961-S . . . . . . . . . . 1253 1966-S . . . . . . . . . . 1253 1A*BF* . . . . . . . . . . . 771 1A*BFA* . . . . . . . . . 771 1A*BFB* . . . . . . . . . 772 1A*BJ* . . . . . . . . . . . 775 1A*BP* . . . . . . . . . . . 772 1A*DK* . . . . . . . . . . 774 1A*DL* . . . . . . . . . . . 773 1A*DLA* . . . . . . . . . 773 1A*DLB* . . . . . . . . . 773 1A*DS* . . . . . . . . . . 774 1A*DSA* . . . . . . . . . 774 1A*DSB* . . . . . . . . . 775 1A*EK* . . . . . . . . . . . 775 1A*FL* . . . . . . . . . . . 770 1A*FLA* . . . . . . . . . . 770 1A*FLB* . . . . . . . . . . 770 1A*JF* . . . . . . . . . . . 775 1A*KF* . . . . . . . . . . . 776 1A*KS* . . . . . . . . . . . 776 1A*KSA* . . . . . . . . . 776 1A*MC* . . . . . . . . . . 771 1A*MCA* . . . . . . . . . 771 1A*MCB* . . . . . . . . . 771 1A*TE* . . . . . . . . . . . 772 1AA*FJ* . . . . . . . . . . 764 1AA*FJ*C . . . . . . . . 825
1AA*FJA* . . . . . . . . 765 1AA*FJB* . . . . . . . . 765 1AA*FJC* . . . . . . . . 765 1AA*FR* . . . . . . . . . 767 1AA*FRA* . . . . . . . . 768 1AA*FRB* . . . . . . . . 768 1AA*FRC* . . . . . . . . 768 1AA*FS* . . . . . . . . . 766 1AA*MB* . . . . . . . . . 766 1AA*MF* . . . . . . . . . 769 1AA*MFA* . . . . . . . . 769 1AA*MFB* . . . . . . . . 769 1AA*MJ* . . . . . . . . . 766 1AA*MP* . . . . . . . . . 763 1AA*MR* . . . . . . . . . 769 1AA*PF* . . . . . . . . . 764 1AA*PS* . . . . . . . . . 763 1AA*PSB* . . . . . . . . 763 1AA*SB* . . . . . . . . . 767 1AA*SBB* . . . . . . . . 767 1AA*SP* . . . . . . . . . 764 1AR*FJ* . . . . . . . . . . 764 1AR*MP* . . . . . . . . . 763 1AT*BF* . . . . . . . . . 771 1AT*DL* . . . . . . . . . 773 1AT*FL* . . . . . . . . . . 770 1AT*FLA* . . . . . . . . 770 1AT*FLB* . . . . . . . . 770 1AV*FJ* . . . . . . . . . . 764 1AV*FJA* . . . . . . . . 765 1AV*FJB* . . . . . . . . 765 1AV*FR* . . . . . . . . . 767 1AV*FRA* . . . . . . . . 768 1AV*FRB* . . . . . . . . 768 1AV*MJ* . . . . . . . . . 766 1AV*MP* . . . . . . . . . 763 1B*BF* . . . . . . . . . . . 782 1B*BFA* . . . . . . . . . 782 1B*BFB* . . . . . . . . . 782 1B*DL* . . . . . . . . . . . 783 1B*DS* . . . . . . . . . . 783 1B*DSA* . . . . . . . . . 783 1B*DSB* . . . . . . . . . 783 1B*FH* . . . . . . . . . . 781 1B*FHA* . . . . . . . . . 781 1B*FHB* . . . . . . . . . 782 1B*FL* . . . . . . . . . . . 780 1B*FLA* . . . . . . . . . . 780 1B*FLB* . . . . . . . . . . 781 1B*FLF* . . . . . . . . . . 780 1B*FLG* . . . . . . . . . 781 1B*KF* . . . . . . . . . . . 784 1B/* . . . . . . . . . . . . 1015 1BA*FJ* . . . . . . . . . . 777 1BA*FJA* . . . . . . . . 777 1BA*FJB* . . . . . . . . 778 1BA*FJC* . . . . . . . . 778 1BA*FR* . . . . . . . . . 779 1BA*FRA* . . . . . . . . 779 1BA*FRB* . . . . . . . . 779 1BA*FRC* . . . . . . . . 779 1BA*MB* . . . . . . . . . 778 1BA*MJ* . . . . . . . . . 778
1BA*MP* . . . . . . . . . 777 1BA*MR* . . . . . . . . . 780 1-CAP . . . . . . . . . . . 932 1CE140* . . . . . . . . . 196 1CE20* . . . . . . . . . . 188 1CE30* . . . . . . . . . . 190 1CE300* . . . . . . . . . 197 1CLLR100* . . . . . . . 201 1CLLR50* . . . . . . . . 198 1-COUPLING . . . . . 930 1-CROSS . . . . . . . . 931 1E*BF* . . . . . . . . . . 789 1E*BFB* . . . . . . . . . 789 1E*CT* . . . . . . . . . . 786 1E*CTA* . . . . . . . . . 787 1E*CTB* . . . . . . . . . 787 1E*CTD* . . . . . . . . . 786 1E*CTE* . . . . . . . . . 787 1E*DS* . . . . . . . . . . 789 1E*FH* . . . . . . . . . . 785 1E*FHA* . . . . . . . . . 786 1E*FHB* . . . . . . . . . 786 1E*FL* . . . . . . . . . . . 787 1E*FLA* . . . . . . . . . 788 1E*FLB* . . . . . . . . . 788 1E20FLA20 . . . . . . . 788 1E24FH24 . . . . . . . . 785 1E24FHB20 . . . . . . . 786 1E24FHB24 . . . . . . . 786 1E32DS20 . . . . . . . . 789 1EA*FJ* . . . . . . . . . . 785 1EA*FJA* . . . . . . . . 785 1EA*FJB* . . . . . . . . 785 1EA*FR* . . . . . . . . . 788 1EA*FRA* . . . . . . . . 788 1EA*FRB* . . . . . . . . 788 1EA20FJA20 . . . . . . 785 1EA20FJB20 . . . . . . 785 1EA20FR20 . . . . . . . 788 1EA20FRA20 . . . . . 788 1EA20FRB20 . . . . . 788 1F40104-*C . . . . . . . 817 1F40105-*C . . . . . . . 816 1F40106-* . . . . . . . . 824 1FO-*OGZ . . . . . . . . 943 1FO-*Z . . . . . . . . . . 942 1GA*FJ* . . . . . . . . . 792 1HP7-S . . . . . . . . . . 125 1J-*Z . . . . . . . . . . . . 978 1J9-*Z . . . . . . . . . . . 982 1JFL-*Z . . . . . . . . . . 997 1JFL9-*Z . . . . . . . . . 997 1JFS-*Z . . . . . . . . . . 998 1JH-*Z . . . . . . . . . . 1004 1JN-*Z . . . . . . . 962, 963 1JN4-*Z . . . . . . 966, 967 1JN9-*LZ . . . . . . . . . 969 1JN9-*Z . 967, 968, 969 1JO-*Z . . . . . . . 988, 989 1JO4-*OGZ . . . . . . . 990 1JO9-*OGLZ . . . . . . 992 1JO9-*OGZ . . . 991, 992 1MB/* . . . . . . . . . . 1012
1N-*Z . . . . . . . . . . . . .950 1N9-*Z . . . . . . . . . . . .956 1-PLUG . . . . . . . . . . .932 1SA*FJ* . . . . . . . . . .791 1SA*FJB* . . . . . . . . .791 1SA8 . . . . . . . . . . . . .791 1SB* . . . . . . . . . . . . .791 1SE30* . . . . . . 191, 192 1SE90* . . . . . . . . . . .194 1SR8427L . . . . . . . .1232 1-STEEL-COUPLING 933 1-TEE . . . . . . . . . . . .931 1TFMS-6-5B . . . . . . .832 1-UNION . . . . . . . . . .931 1X* . . . . . . . . . . . . . .934 1X*-80 . . . . . . . . . . . .935 1X*-BELLRDCR . . . .930 1X*-HEXBUSH . . . . .930 1Z*CT* . . . . . . . . . . .786 1Z*CTB* . . . . . . . . . .787 1Z*CTD* . . . . . . . . . .786 1Z*CTE* . . . . . . . . . .787 1Z*DS* . . . . . . . . . . .789 1Z*FH* . . . . . . . . . . .785 1Z*FHA* . . . . . . . . . .786 1Z*FHB* . . . . . . . . . .786 1ZA*FJ* . . . . . . . . . . .785 1ZA*FR* . . . . . . . . . .788 20 1005SH * . . . . . . .388 200-* . . . . . . . . . . . . .729 2000-*B . . . . . . . . . .1045 200001-*B . . . . . . . .1052 200-0039 . . . . . . . . . .164 20-0600-00 . . . 737, 874 2006TX . . . . . . . . . . .157 2008TX . . . . . . . . . . .157 2008TX-ASAE . . . . . .157 200C-N . . . . . . . . . . .299 2010TX . . . . . . . . . . .157 2012TX . . . . . . . . . . .157 2014TX . . . . . . . . . . .157 2014X* . . . . . . . . . . .649 2016TX . . . . . . . . . . .157 2018-*S . . . . . . . . . . .966 2018TX . . . . . . . . . . .158 2020-*-*S . . . . . . . . .986 2020TX . . . . . . . . . . .158 2021-*-*B . . . . . . . .1044 2021-*-*S . . . . 962, 963 202113-*-*S . . . . . . .963 202124-*-*S . . . . . .1001 202179 . . . . . . . . . . .407 2022-*-*S . . . . 964, 965 2023-*-*B . . . . . . . .1044 2023-*-*S . . . . 966, 967 2024-*-*B . . . . . . . .1044 2024-*-*S 967, 968, 969 202411-*-*S . . . . . . .969 202413-*-*S . . . . . . .969 2024TX . . . . . . . . . . .158 2025-*-*S . . . . . . . . .970 2027-*-*S . . . . . . . . .978 202702-*-*S . . 988, 989
1299
Model Number Index

Model Number Page Model Number Page Model Number Page Model Number Page Model Number Page 202713-*-*S . . . . . . . 989 2028-*-*S . . . . . . . . . 971 202V* . . . . . . . . . . . . 729 202X* . . . . . . . . . . . 1053 202X*X* . . . . . . . . . 1053 2030-*-*S . . . . . . . . . 971 203002-*-*S . . . . . . . 984 203003-*-*S . . . . . . . 993 203005-*-*S . . . . . . . 993 203008-*-*S . . . . . . . 985 2030X* . . . . . . . . . . . 903 2030X44 . . . . . . . . . 903 2031-*-*S . . . . . . . . . 972 203101-*-*S . . . . . . . 985 203102-*-*S . . . . . . . 986 20312-1 . . . . . . . . . . 652 20313-2 . . . . . . . . . . 652 2033-*-*S . . . . . . . . . 984 2038-*-*S . . . . . . . . . 812 2039-*-*S . . . . . . . . . 982 204-* . . . . . . . . . . . . 163 2040-*-*S . . . . . . . . . 952 2041-*-*S . . . . . . . . . 979 2042-*-*S . . . . . . . . . 981 2043-*-*S . . . . . . . . . 982 2044-*-*S . . . . . . . . . 967 2045-*-*S . . . . . 953, 954 2046-*-*S . . . . . . . . . 954 2047-*-*S . . . . . 957, 958 2048-*-*S . . . . . . . . . 958 2049-*-*S . . . . . . . . . 955 2050-*-*S . . . . . . . . . 955 20500026 . . . . . . . . 1059 20500110 . . . . . . . . 1059 20500291 . . . . . . . . 1062 20500311 . . . . . . . . 1059 20500317 . . . . . . . . 1059 20500318 . . . . . . . . 1059 2061-*-*S . . . . . . . . . 990 2062-*-*S . . . . . 991, 992 206209-*-*S . . . . . . . 992 2063-*-*S . . . . . . . . 1008 2066-*-*S . . . . . . . . . 973 2067-*-*S . . . . . . . . . 975 2068-*-*S . . . . . . . . . 975 206801-*-*S . . . . . . . 975 2070-*-*S . . . . . . . . . 981 2071-*-*S . . . . . 982, 983 208-* . . . . . . . . . . . . 163 2080-*-*S . . . . . . . . . 961 2081-*-*S . . . . . . . . . 951 2082-*-*S . . . . . . . . . 952 2083-*-*S . . . . . . . . . 950 2084-*-*S . . . . . . . . . 950 2085-*-*S . . . . . . . . . 956 2087-*-*S . . . . . . . . . 958 2088-*-*S . . . . . . . . . 956 2089-*-*S . . . . . 956, 957 208MS-6-5B . . . . . . . 837 208MS-6-6B . . . . . . . 837 209-* . . . . . . . . . . . . 163 2090-*-*S . . . . . 960, 961 2091-*-*S . . . . . . . . . 960 2092-*-*S . . . . . . . . . 959 2093-*-*S . . . . . . . . . 959 209569 . . . . . . . . . . . 389 2096-*S . . . . . . 954, 955 209972-ASHCROFT 389 209989-ASHCROFT 389 209996 . . . . . . . . . . . 389 20FOP . . . . . . . . . . 1091 20FOPX . . . . . . . . . 1091 20SFO . . . . . . . . . . 1097 20SFXO . . . . . . . . . 1097 2-1/2-90 ELBOW . . . 931 2-1/2-COUPLING . . 930 2-1/2-STEEL-COUPLING 933 2-1/2X* . . . . . . . . . . . 934 2-1/2X*-BELLRDCR 930 2-1/2X*-HEXBUSH . 930 210008 . . . . . . . . . . . 389 210015 . . . . . . . . . . . 388 210212-*S . . . . . . . . 972 210244 . . . . . . . . . . . 389 210251 . . . . . . . . . . . 390 210268 . . . . . . . . . . . 390 210275 . . . . . . . . . . . 390 210292-*S . . . . . . . . 986 210299 . . . . . . . . . . . 390 210305 . . . . . . . . . . . 390 210329 . . . . . . . . . . . 390 210343 . . . . . . . . . . . 390 210350 . . . . . . . . . . . 389 2105X* . . . . . . . . . . . 878 210C-N . . . . . . . . . . 298 211-* . . . . . . . . . . . . 162 212781 . . . . . . . . . . . 389 21290C . . . . . . . . . 1236 213870 . . . . . . . . . . . 390 213986 . . . . . . . . . . . 389 21502X* . . . . . . . . . 1056 21517X* . . . . . . . . . 1056 21518X* . . . . . . . . . 1056 217564 . . . . . . . . . . . 390 2200X* . . . . . . . . . . 1053 2215-*-*S . . . . . 979, 980 221501-*-*S . . . . . . . 980 2216-*-*S . . . . . 973, 974 2216-6-12S . . . . . . . 973 222005-* . . . . . . . . . 758 222070 . . . . . . 752, 1157 2222-*S . . . . . . . . . . 953 2229X* . . . . . . . . . . 1049 2232X* . . . . . . . . . . 1053 2239-*-*S . . . . . . . . . 964 223-C . . . . . . . . . . . . 638 2240-*-*S . . . . . . . . . 964 2242-*-*S . . . . . . . . . 965 2246-*-*S . . . . . . . . . 973 2247-*-*S . . . . . . . . . 955 2249-*-*S . . . . . . . . . 970 2250-*-*S . . . . . 969, 970 2252-*-*S . . . . . . . . . 957 2254-*-*S . . . . . . . . . 960 22546-* . . . . . . . . . 1098 2255-*-*S . . . . . . . . . 960 2256-*-*S . . . . . . . . . 959 2257-*-*S . . . . . . . . . 959 22617-* . . . . 1099, 1142 226511 . . . . . . . . . . 389 226528 . . . . . . . . . . 389 2266-*-*S . . . . . . . . . 990 226AS10022A . . . . . 356 226AS10023A . . . . . 356 2274X* . . . . . . . . . . 1050 2276X* . . . . . . . . . . 1050 2278X* . . . . . . . . . . 1050 229235 . . . . . . . . 91, 93 229236 . . . . . . . . . . 116 229AS10036A . . . . . 354 229AS10037A . . . . . 354 230-* . . . . . . . . 645, 647 23129X* . . . . . . . . . 1039 23152X* . . . . . . . . . 1038 23155X* . . . . . . . . . 1039 23200X* . . . . . . . . . 1038 23232X* . . . . . . . . . 1037 23236X* . . . . . . . . . 1037 23308X* . . . . . . . . . 1040 23325X* . . . . . . . . . 1037 233-4005-003 . . . . . 164 23355X* . . . . . . . . . 1041 23455X* . . . . . . . . . 1041 2352X* . . . . . . . . . . 1054 2365-1 . . . . . . . . . . 1254 2371 . . . . . . . . . . . 1254 2380322 . . . . . 367, 372 238929 . . . . . . . . 94, 96 2402X* . . . . . . . . . . 1054 2403-*-* . . . . . . . . . . 978 2404-*-* . . . . . . 962, 963 2405-*-* . . . . . . 964, 965 2406-*-* . . . . . . 979, 980 2408-* . . . . . . . . . . . 987 240V* . . . . . . . . . . . . 731 241016 . . . . . . . . . . 124 2415-* . . . . . . . . . . . 635 241X* . . . . . . . . . . . . 902 242X* . . . . . . . . . . . 1050 244X* . . . . . . . . . . . 1051 245X* . . . . . . . . . . . 1048 246793 . . . . . . . . . . 389 246X* . . . . . . . . . . . 1046 248X* . . . . . . . . . . . 1045 249X* . . . . . . . . . . . 1047 24FOPX . . . . . . . . . 1091 24SFO . . . . . . . . . . 1097 24SFXO . . . . . . . . . 1097 250-* . . . . . . . . . . . . 728 2500-*-* . . . . . . . . . . 982 2500006 . . . . . 366, 367 2501-*-* . . . . . . 968, 969 25017 . . . . . . . . . . . 419 2502-*-* . . . . . . . . . . 970 2503-*-* . . . . . . . . . . 967 2505-*-* . . . . . . . . . . 967 2508TX . . . . . . . . . . 158 2508TX-ASAE . . . . . 158 250X* . . . . . . . . . . 1047 2510TX . . . . . . . . . . 158 2512TX . . . . . . . . . . 158 2514TX . . . . . . . . . . 158 2516TX . . . . . . . . . . 158 2518TX . . . . . . . . . . 158 251X* . . . . . . . . . . 1048 252-* . . . . . . . . . . . . 728 2520V* . . . . . . . . . . 117 2520VQ* . . . . . . . . . 117 2524TX . . . . . . . . . . 158 252555 . . . . . . . . . . 426 252556 . . . . . . . . . . 426 252V* . . . . . . . . . . . 730 252X* . . . . . . . . . . 1053 253361 . . . . . . . . . . 280 253AS12662A . . . . . 354 253AS12886A . . . . . 354 254848 . . . . . . . . . . 118 254X* . . . . . . . . . . 1046 25500278 . . . . . . . 1060 25500-901 . . . . . . . . 106 25501-RSC . . . . . . . 105 25503-RSA . . . . . . . 105 25504-LSC . . . . . . . 106 25504-RSC . . . . . . . 106 2556-* . . . . . . . . . . . 721 255633 . . . . . . . . . . 328 255654 . . . . . . . . . . 328 255AS10026A . . . . . 356 255X* . . . . . . . . . . 1050 2570-* . . . . . . . . . . . 740 259-4411-* . . . . . . . 829 259-4721-* . . . . . . . 829 25CT-* . . . . . . . . . . . 714 25V* . . . . . . . . . . . . . 94 25VQ* . . . . . . . . . . . . 95 25VQT* . . . . . . . . . . 100 26001-RZG . . . . . . . 104 26002-RZC . . . . . . . 104 26003-RZG . . . . . . . 104 26003-RZJ . . . . . . . 104 26004-RAF . . . . . . . 104 26004-RZC . . . . . . . 104 26004-RZE . . . . . . . 104 26004-RZG . . . . . . . 104 26005-RZC . . . . . . . 104 26005-RZE . . . . . . . 104 26006-LZC . . . . . . . 104 26006-RZC . . . . . . . 104 26007-LZC . . . . . . . 105 26007-RZC . . . . . . . 105 26007-RZE . . . . . . . 105 2601-*-*-* . . . . . . . . 971 26010-RZC . . . . . . . 105 26011-RZC . . . . . . . 105 26012-RZJ . . . . . . . 105 26013-LZC . . . . . . . 105 2602-*-*-*FG . . . . . . 972 2603-*-*-* . . . . . . . . 984 2605-*-*-* . . . . . . . . 971 2606-*-*-* . . . . . . . . 972 260X* . . . . . . . . . . . 907 261X* . . . . . . . . . . . .907 262332 . . . . . . . . . . .265 263585 . . . . . . . . 87, 89 26504-RBN . . . . . . . .118 2651-* . . . . . . . . . . . .704 2661-* . . . . . . . . . . . .700 266X* . . . . . . . . . . . .908 268X* . . . . . . . . . . . .908 2700-LN-*-*-FG . . . . .979 2701-*-* . . . . . . . . . . .982 2701-LN-*-*-FG . . . . .982 2702-*-* . . . . . . . . . . .981 2702-LN-*-*-FG . . . . .981 2704-LN-*-*-*-FG . . .985 2705-*-* . . . . . . . . . . .964 2706-*-* . . . . . . . . . . .964 272V* . . . . . . . . . . . .730 280515 . . . . . . . . 91, 93 2807-* . .744, 745, 1118 28-304 . . . . . . . . . . .1040 289084 . . . . . . . . . . .118 290620 . . . . . . . . . . .276 2-90ELBOW . . . . . . .931 2-90STREETEL . . . .931 290V* . . . . . . . . . . . .731 292V* . . . . . . . . . . . .731 294922 . . . . . . . . . . . .93 295X* . . . . . . . . . . . .907 29665 . . .656, 660, 667 29668 . . . . . . . . . . . .659 29850 . . . . . . . 658, 659 298721 . . . . . . . . . . .276 2BVL2024F . . . . . . . .168 2BVL2032F . . . . . . . .168 2-CAP . . . . . . . . . . . .932 2-CROSS . . . . . . . . .931 2F9-*Z . . . . . . . . . . . .948 2H0108-08R.031 . . . .953 2J-*Z . . . . . . . . 979, 980 2J4-*Z . . . . . . . . . . . .981 2J9-*Z . . . . . . . 982, 983 2NJ-*Z . . . . . . . . . . . .966 2NU-*Z . . . . . . 953, 954 2NU4-*Z . . . . . . . . . .955 2NU9-*Z . . . . . 957, 958 2OJ-*Z . . . . . . . . . . . .990 2OU9-*OGZ . . . . . . .975 2-PLUG . . . . . . . . . . .932 2-STEEL-COUPLING 933 2STF2-B . . . . . . . . .1235 2-TEE . . . . . . . . . . . .931 2TFMS-6-5B . . . . . . .837 2-UNION . . . . . . . . . .931 2X* . . . . . . . . . . . . . .934 2X*-80 . . . . . . . . . . . .935 2X*-BELLRDCR . . . .930 2X*-HEXBUSH . . . . .930 3/16.035 . . . . . . . . . .869 3/16.035-SS . . . . . . .871 3/4.049 . . . . . . . . . . .869 3/4.065 . . . . . . . . . . .869 3/4.065-SS . . . . . . . .871 3/4.095 . . . . . . . . . . .869
Fluid Conveying
1300
Model Number Index

3/4.095-SS . . . . . . . . 871 3/4.109 . . . . . . . . . . . 869 3/4-45STREETEL . . 931 3/4-90ELBOW . . . . . 931 3/4-90STREETEL . . 931 3/4-CAP . . . . . . . . . . 932 3/4-COUPLING . . . . 930 3/4-PLUG . . . . . . . . . 932 3/4-STEEL-COUPLING . 933 3/4-TEE . . . . . . . . . . 931 3/4-UNION . . . . . . . . 931 3/4X* . . . . . . . . . . . . 934 3/4X*-80 . . . . . . . . . . 935 3/4X*-BELLRDCR . . 930 3/4X*-HEXBUSH . . . 930 3/8.035-SS . . . . . . . . 871 3/8.049 . . . . . . . . . . . 869 3/8.049-SS . . . . . . . . 871 3/8.065 . . . . . . . . . . . 869 3/8-90STREETEL . . 931 3/8-CAP . . . . . . . . . . 932 3/8-COUPLING . . . . 930 3/8-PLUG . . . . . . . . . 932 3/8-STEEL-COUPLING . 933 3/8X* . . . . . . . . . . . . 934 3/8X*-80 . . . . . . 934, 935 3/8X*-B . . . . . . . . . . 936 3/8X*-BELLRDCR . . 930 3/8X*-HEXBUSH . . . 930 300-*-FT . . . . . . . . . . 703 300147 . . . . . . . . . . . 358 3006TX . . . . . . . . . . 158 3008TX . . . . . . . . . . 158 3008TX-ASAE . . . . . 158 300944 . . . . . . . . . . . 426 300997 . . . . . . . . . . . 426 300AA00009A . . . . . 332 300AA00042A . . . . . 332 300AA00081A . . . . . 332 300AA00082A . . . . . 332 300AA00085A . . . . . 332 300AA00086A . . . . . 332 300AA00095A . . . . . 332 300AA00096A . . . . . 332 300AA00121A . . . . . 332 300AA00122A . . . . . 332 30103 . . . . . . . . . . . 1222 3010TX . . . . . . . . . . 158 3012TX . . . . . . . . . . 158 3014TX . . . . . . . . . . 158 30162 . . . . . . . . . . . 1221 3016TX . . . . . . . . . . 158 3018TX . . . . . . . . . . 158 3020TX . . . . . . . . . . 158 3024TX . . . . . . . . . . 158 302X* . . . . . . . . . . . 1055 3039704 . 349, 350, 354 3039727 . . . . . . . . . . 356 308730A . . . . . . . . 1252 308730-ALEMITE . 1252 30922-DSC . . . . . . . 204
30950-901 . . . . . . . . 204 30CT-* . . . . . . . . . . . 714 310872 . . . . . . . . . . . 149 312-055 . . . . . . . . . . 840 312062-* . . . . . . . . . 149 312065-* . . . . . . . . . 149 3129X* . . . . . 1039, 1055 3130-* . . . . . . . . . . . 712 3151X* . . . . . . . . . . 1038 3152X* . . . . . . . . . . 1038 3153X* . . . . . . . . . . 1038 316011 . . . . . . . . . . . 276 316130 . . . . . . . . . . . 276 32-002 . . . . . . . . . . . 839 3200X* . . . . . . . . . . 1037 3200X*X* . . . . . . . . 1037 32-044 . . . . . . . . . . . 840 32-045 . . . . . . . . . . . 840 32-048 . . . . . . . . . . . 840 3205/205PPH . . . . 1109 32-092 . . . . . . . . . . . 841 32-159 . . . . . . . . . . . 841 32-160 . . . . . . . . . . . 841 32-162 . . . . . . . . . . . 841 3220X*X* . . . . . . . . 1037 32-311 . . . . . . . . . . . 840 327-* . . . . . . . . . . . . 733 3270* . . . . . . . . . . . . 873 3270-* . . . . . . . . . . . 873 328096 . . . . . . . . . 91, 93 32SFO . . . . . . . . . . 1097 3300X* . . . . . . . . . . 1039 3300X*X* . . . . . . . . 1039 3324-1001.4 . . . . . 1236 3325X* . . . . . . . . . . 1037 3325X*X* . . . . . . . . 1037 3333-059 . . . . . . . . . 156 3350X* . . . . . . . . . . 1041 339804 . . . . . . . . . . 1250 339841 . . . . . . . . . . 1250 3400X* . . . . . . . . . . 1041 343573 . . . . . . . . . . . 111 3474-*-*-NWO . . . . . 994 3500X* . . . . . . . . . . 1042 3508TX . . . . . . . . . . 158 3508TX-ASAE . . . . . 158 3510TX . . . . . . . . . . 158 3514 . . . . . . . . . . . . . 843 3514TX . . . . . . . . . . 158 3516TX . . . . . . . . . . 158 3518 . . . . . . . . . . . . . 843 3518TX . . . . . . . . . . 158 352X* . . . . . . . . . . . 1054 355AS11101A . . . . . 350 355AS11105A . . . . . 350 358357-* . . . . . . . . . . 90 358357-1 . . . . . . . . . . 90 359287 . . . . . . . . . 91, 93 35M* . . . . . . . . . . . . 149 35VQ* . . . . . . . . . . . . 97 35VQT* . . . . . . . . . . 100 360036 . . . . . . . . . . . 144 3600X* . . . . . . . . . . 1042
3624-0003 . . . . . . . . 722 365-* . . . . . . . . . . . . 732 3700X* . . . . . . . . . . 1042 372606-* . . . . . . . . . . 90 372613-* . . . . . . . . . . 90 372613-1 . . . . . . . . . . 90 372617-* . . . . . . . . . . 90 372639-* . . . . . . . . . . 90 372639-1 . . . . . . . . . . 90 374338 . . . . . . . . 87, 89 374339 . . . . . . . . 87, 89 374343 . . . . . . . . 87, 89 3750X* . . . . . . . . . . 1042 3750X12 . . . . . . . . 1042 375480 . . . . . . . . 87, 89 375655-* . . . . . . . . . . 86 3770-* . . . . . . . . . . . 716 37AL-* . . . . . . . . . . . 713 3800-* . . . . . . . . . . . 716 38-190627-*-* 813, 1129 38-191074-* . . . . . . . 814 382063-7 . . . . . . . . . . 86 382074-* . . . . . . . . . . 86 382075-* . . . . . . . . . . 86 382077-* . . . . . . . . . . 86 382077-1 . . . . . . . . . . 86 382082-* . . . . . . . . . . 86 382084-* . . . . . . . . . . 86 382086-* . . . . . . . . . . 86 382087-* . . . . . . . . . . 86 383N-* . . . . . . . . . . . 637 385998-R . . . . . . . . . 123 387481 . . . . . . . . . . . 89 39001 . . . . . . . . . . 1221 39002 . . . . . . . . . . 1222 39006 . . . . . . . . . . 1221 390099-7 . . . . . . . . . . 86 39011-1 . . . . . . . . . 1221 39011-2 . . . . . . . . . 1221 39030-1 . . . . . . . . . 1221 3903-02142 . . . . . . . 794 3903-03102 . . . . . . . 794 3903-03504 . . . . . . . 794 3903-03545 . . . . . . . 794 3903-03644 . . . . . . . 795 3903-04106 . . . . . . . 794 3903-04404 . . . . . . . 795 3903-04474 . . . . . . . 795 3903-04506 . . . . . . . 794 3903-04544 . . . . . . . 794 3903-04545 . . . . . . . 794 3903-04644 . . . . . . . 795 3903-04646 . . . . . . . 795 3903-05406 . . . . . . . 795 3903-05476 . . . . . . . 795 3903-05506 . . . . . . . 794 3903-05546 . . . . . . . 794 3903-05606 . . . . . . . 794 3903-06104 . . . . . . . 794 3903-06106 . . . . . . . 794 3903-06108 . . . . . . . 794 3903-06146 . . . . . . . 794 3903-06408 . . . . . . . 795
3903-06548 . . . . . . . 794 3903-06606 . . . . . . . 794 3903-06648 . . . . . . . 795 3903-08106 . . . . . . . 794 3903-08408 . . . . . . . 795 3903-08508 . . . . . . . 794 3903-08550 . . . . . . . 794 390A-06546 . . . . . . . 825 3-90ELBOW . . . . . . 931 390H-04544 . . . . . . 797 390H-08548 . . . . . . 797 3-90STREETEL . . . 931 3922-* . . . . . . . . . . . 155 3931-* . . . . . . . . . . . 156 3933-* . . . . . . . . . . . 156 393723-* . . . . . . . . . . 90 394450-* . . . . . . . . . . 90 394973 . . . . . . . 97, 149 394974 . . . . . . . . . . . 98 394976 . . . . . . . . 94, 96 3950X* . . . . . . . . . 1043 39X* . . . . . . . . . . . 1049 3CU1425130 . . . . . . 208 3R80-* . . . . . . . . . . . 715 3-STEEL-COUPLING 933 3STF3-B . . . . . . . . 1235 3STM3-B . . . . . . . . 1235 3X*-BELLRDCR . . . 930 3X*-HEXBUSH . . . . 930 3XCAR110213 208, 221, . . . . . . . . . . . . . . . . . 225 3XCLOSE . . . . . . . . 934 400-*-4490-A 1094, 1148 400-*-4490-A) . . . . 1094 400-010-4490 . . . . 1094 400-011-4490 . . . . 1094 400-024-4490 . . . . 1094 40004-5 . . . . . . . . . 1222 400-050 . . . . . . . . . . 173 400-101 . . . . . . . . . . 870 400-161 . . . . . . . . . . 870 400-211 . . . . . . . . . . 870 400-240-4490 . . . . 1094 400-242-4490 . . . . 1094 400-243-4490 . . . . 1094 400-245-4490 . . . . 1094 400-251 . . . . . . . . . . 870 400-271 . . . . . . . . . . 870 400-361 . . . . . . . . . . 870 400-431 . . . . . . . . . . 870 400-481 . . . . . . . . . . 870 400-531 . . . . . . . . . . 870 400-581 . . . . . . . . . . 870 40-080 . . . . . . . . . . . 936 40-081 . . . . . . . . . . . 936 40-082 . . . . . . . . . . . 936 40-084 . . . . . . . . . . . 936 40-086 . . . . . . . . . . . 936 4008TX . . . . . . . . . . 158 400-DIXON . . . . . . . 866 401-*B . . . . . . . . . . . 833 401-*S . . . . . . . . . . . 801 40-100 . . . . . . . . . . . 936
40-101 . . . . . . . . . . . .936 40-103 . . . . . . . . . . . .936 40-105 . . . . . . . . . . . .936 4010TX . . . . . . . . . . .158 4012TX . . . . . . . . . . .158 40-140 . . . . . . . . . . . .936 40-141 . . . . . . . . . . . .936 40-145 . . . . . . . . . . . .936 4018TX . . . . . . . . . . .158 401AA00011A . . . . . .185 4020 . . . . . . . . . . . .1232 40202 . . . . . . . . . . .1222 40203-10 . . . . . . . . .1222 4024TX . . . . . . . . . . .158 402X* . . . . . . . . . . .1054 402X*X* . . . . . . . . .1054 40313-1 . . . . . . . . . .1222 406-*S . . . . . . . . . . . .801 406AA00002A . . . . . .188 406AA00006A . . . . . .190 406AA00026A . . . . . .196 406AA00031A . . . . . .197 406AA00049A . . . . . .191 406AA00052A . . . . . .192 406AA00054A . . . . . .194 407AA00013A . . . . . .198 407AA00014A . . . . . .201 4092 . . . . . . . . . . . .1232 40MH* . . . . . . . . . . . .144 40SFO . . . . . . . . . . .1097 40X* . . . . . . . . . . . .1049 410AA00008A . . . . . .201 410AA00012A . . . . . .189 410AA00015A . . . . . .190 410AA00020A . . . . . .196 410AA00022A . . . . . .197 410AA00034A . . . . . .125 410-OHLA . . . . . . . . .151 411-*B . . . . . . . . . . . .833 411-*S . . . . . . . . . . . .800 412-*-*B . . . . . . . . . .833 412-*-*S . . . . . . . . . .800 416427 . . . . . . . . . . .118 416437 . . . . . . . . . . . .98 416442 . . . . . . . . . . . .96 416457-* . . . . . . . . . . .95 416458-1 . . . . . . . . . . .98 417992-* . . . . . . . . . . .95 417993-3 . . . . . . . . . . .95 41X* . . . . . . . . . . . . .902 420050-1 . . . . . . . . . .419 42030-A . . . . . . . . .1254 420607 . . . . . . . . . . .286 420618-* . . . . . . . . . . .98 421475-* . . . . . . . . . . .95 421477-* . . . . . . . . . . .95 421529-* . . . . . . . . . . .97 4219-0107 . . . . . . . . .738 421967-* . . . . . . . . . . .98 421AK00391B . . . . . .115 421AK00392B . . . . . .115 421AK00393B . . . . . .115 421AK00394B . . . . . .115
1301
Model Number Index

Model Number Page Model Number Page Model Number Page Model Number Page Model Number Page 421AK00694A . . . . . 115 421AK00694B . . . . . 115 421AK01292B . . . . . 115 422.30 . . . . . . . . . . 1229 422.72 . . . . . . . . . . 1229 422582 . . . . . . . . . . . 130 422583 . . . . . . . . . . . 130 422584 . . . . . . . . . . . 130 424 . . . . . . . . . . . . . 1242 4244-20-16 . . . . . . . 839 4245-* . . . . . . . . . . . 873 425416 . . . . . . . . . . . 109 429281 . . . . . . . . . . . . 97 42X* . . . . . . . . . . . . 1049 430199-* . . . . . . . . . 117 4401-*S . . . . . . . . . . 801 4402-*S . . . . . . . . . . 802 4404-*-* . . . . . . . . . . 977 44-105 . . . . . . . . . . . 928 44-106 . . . . . . . . . . . 928 4411-*-*S . . . . 801, 1130 4411-*S . . . . . 801, 1130 4412-*-*S . . . . . . . . . 800 4414-*S . . . . . . . . . . 802 44-164 . . . . . . . . . . . 928 44-165 . . . . . . . . . . . 928 44-166 . . . . . . . . . . . 928 44-167 . . . . . . . . . . . 928 44-168 . . . . . . . . . . . 928 44-255 . . . . . . . . . . . 928 44-257 . . . . . . . . . . . 928 44-258 . . . . . . . . . . . 928 44-411-* . . . . . . . . . . 833 44-415 . . . . . . . . . . . 928 44-416 . . . . . . . . . . . 928 44-417 . . . . . . . . . . . 928 44-418 . . . . . . . . . . . 928 44-470 . . . . . . . . . . . 929 44-473 . . . . . . . . . . . 929 44-474 . . . . . . . . . . . 929 44-475 . . . . . . . . . . . 929 44-476 . . . . . . . . . . . 929 44-477 . . . . . . . . . . . 929 44-511 . . . . . . . . . . . 928 44-512 . . . . . . . . . . . 928 44-513 . . . . . . . . . . . 928 44-516 . . . . . . . . . . . 928 44-517 . . . . . . . . . . . 928 44-518 . . . . . . . . . . . 928 44-522 . . . . . . . . . . . 928 44-523 . . . . . . . . . . . 928 44-524 . . . . . . . . . . . 928 44-528 . . . . . . . . . . . 928 44-529 . . . . . . . . . . . 928 44-530 . . . . . . . . . . . 928 44-531 . . . . . . . . . . . 928 44-655 . . . . . . . . . . . 928 44-656 . . . . . . . . . . . 928 44-658 . . . . . . . . . . . 928 44X* . . . . . . . . . . . . 1051 4501-*-* . . . . . . . . . . 977 4503-*-* . . . . . . . . . . 977 4520VQ* . . . . . . . . . 117 459156 . . . . . . . . . . . 273 45VQ* . . . . . . . . . . . . 98 45X* . . . . . . . . . . . . 1048 460-1 . . . . . . . . . . . . 638 4601-*-*-* . . . . . . . . . 996 4604-*-*-* . . . . . . . . . 996 4623-477 . . . . . . . . . 155 4623-524 . . . . . . . . . 155 4633-091 . . . . . . . . . 156 464125 . . . . . . . . . . . 328 466731 . . . . . . . . . . . 337 466837 . . . . . . . . . . . 328 466851 . . . . . . . . . . . 328 466853 . . . . . . . . . . . 328 4688-0651 . . . . . . . . 723 4688-0653 . . . . . . . . 723 4688-0656 . . . . . . . . 723 4688-0665 . . . . . . . . 723 4688-0675 . . . . . . . . 723 4688-0680 . . . . . . . . 723 46X* . . . . . . . . . . . . 1045 46X*X* . . . . . . . . . . 1045 4721-*-*S . . . . . . . . . 807 4721-*S . . . . . . . . . . 807 4738-*-*B . . . . 834, 1126 4739-*B . . . . . . . . . . 834 4740-*B . . . . . 835, 1126 4741-*B . . . . . . . . . . 835 4742-*-*B . . . . . . . . . 835 4742-*B . . . . . . . . . . 835 4743-*-*B . . . . . . . . . 835 4743-*B . . . . . . . . . . 835 4750-*B . . . . . . . . . . 836 4753-*-*B . . . . . . . . . 834 4753-*B . . . . . . . . . . 834 4772-*B . . . . . . . . . . 835 4775-* . . . . . . . . . . . 803 479301-*-*S . . . . . . . 812 479501-*-*S . . . . . . . 812 4797-*-*B . . . . 834, 1124 4797-*B . . . . . 834, 1124 48X* . . . . . . . . . . . . 1045 48X*X* . . . . . . . . . . 1045 49001 . . . . . . . . . . . 1221 49005-1011 . . . . . . 1221 49005-2011 . . . . . . 1221 492650 . . . . . . . . . . . 158 492652 . . . . . . . . . . . 158 493-*-FT . . . . . . . . . 710 493-12-* . . . . . . . . . . 749 493-16-* . . . . . . . . . . 749 493-6-* . . . . . . . . . . . 749 493-8-* . . . . . . . . . . . 749 49X* . . . . . . . 1046, 1047 49X*X* . . . . . 1046, 1047 4B/* . . . . . . . . . . . . 1016 4CKKT50* . . . . . . . . 185 4F-*Z . . . . . . . . . . . . 949 4HTOF6 . . . . . . . . . 1076 4J-*Z . . . . . . . . . . . . 987 4N-*Z . . . . . . . . . . . . 952 4O-*Z . . . . . . . . . . . . 995 4ON-*Z . . . . . . . . . . 995 4P0021-026 . . . . . . . 144 4STF4-B . . . . . . . . 1235 4TAP318010 . 223, 227, 233 4TAP413210 . . . . . . 217 4X* . . . . . . . . . . . . . . 934 4X*-HEXBUSH . . . . 930 5/16.049 . . . . . . . . . 869 5/16.049-SS . . . . . . 871 5/16.065 . . . . . . . . . 869 5/8.065 . . . . . . . . . . 869 5/8.065-SS . . . . . . . 871 5/8.095 . . . . . . . . . . 869 500 . . . . . . . . . . . . 1249 5000-*-* . . . . . . 954, 955 500023-*S . . . . . . . . 997 500024-*-*S . . . . . . . 997 500024-*S . . . . . . . . 997 500025-*-*S . . . . . . . 997 500025-*S . . . . . . . . 997 5002409 . . . . . 349, 350 5002486-1 . . . . . . . . 377 5002487 . . . . . . . . . 377 5002510 . . . . . 349, 350 5002512 . . . . . 349, 350 5002513 . . . . . 349, 350 5002514 . . . . . 349, 350 5002515 . . . . . 349, 350 500454-*S . . . . . . . . 983 501 . . . . . . . . . . . . . 867 5029 . . . . . . . . . . . . 867 5030-* . . . . . . . . . . . 639 504095-*S . . . . . . . . 984 507833 . . . . . . . . . . 265 507834 . . . . . . . . . . 265 507847 . . . . . . . . . . 265 507848 . . . . . . . . . . 265 508172 . . . . . . . . . . 265 508173 . . . . . . . . . . 265 50X* . . . . . . . . . . . . 1047 50X*X* . . . . . . . . . . 1047 5100-1030000 . . . . . 335 5100-10900 . . 213, 265, 271, . . . . . . . . . . . . . 333 5100-S2-*B . . . . . . 1067 5100-S5-*B . . . . . . 1066 5100-S7-* . . . . . . . 1067 5100-S9-* . . . . . . . 1067 5103-1090000 213, 265, 271, . . . . . . . . . . . . . 333 51942 . . . . . . . . . . 1255 525744 . . . . . . . . . . 328 529760 . . . . . . . . . . 261 529762 . . . . . . . . . . 263 53495 . . . . . . . . . . 1255 5400-S8-4 . . . . . . . 1078 5404-*-* . . . . . . . . . . 950 5405-*-* . . . . . . . . . . 952 5406-*-* . . . . . . . . . . 951 5406-C-* . . . . . . . . . 953 5406-HP-* . . . . . . . . 953 5433-174 . . . . . . . . . 156 54X* . . . . . . . . . . . . 1046 54X*X* . . . . . . . . . . 1046 5500-*-* . . . . . . . . . . 956 5502-*-* . . . . . . . . . . 957 5504-*-* . . . . . . . . . . 958 555-GUN . . . . . . . . 1249 55X* . . . . . . . . . . . 1050 5601-*-*S . . . 1068, 1152 5602-*-*S . . . 1069, 1152 5603 . . . . . . . . . . . 1070 5608-*-*S . . . 1069, 1152 5610-*-*S . . . 1069, 1152 565376 . . . . . . . . . . 214 565465 . . . . . . . . . . 262 565534 . . . . . . . . . . 241 565536 . . . . . . . . . . 240 565537 . . . . . . . . . . 238 565538 . . . . . . . . . . 243 565539 . . . . . . . . . . 244 565541 . . . . . . . . . . 247 565542 . . . . . . . . . . 245 565544 . . . . . . . . . . 250 565545 . . . . . . . . . . 251 565546 . . . . . . . . . . 255 565547 . . . . . . . . . . 256 565563 . . . . . . . . . . 304 565568 . . . . . . 199, 305 565569 . . . . . . . . . . 306 565572 . . . . . . . . . . 308 565585 . . . . . . . . . . 283 565589 . . . . . . . . . . 202 565590 . . . . . . . . . . 297 565608 . . . . . . . . . . 289 565619 . . . . . . . . . . 181 5657-* . . . . . 1069, 1152 565806 . 199, 238, 245, 283, . . . . . . . . . . . . . 297 565844 . . . . . . . . . . 177 565854 . . . . . . . . . . 309 565875 . . . . . . . . . . 182 565886 . . . . . . . . . . 300 5659-* . . . . . 1069, 1152 566003 . . . . . . . . . . 292 566149 . . . . . . . . . . 329 566150 . . . . . . . . . . 329 566151 . . . . . . . . . . 329 566161 . . . . . . . . . . 331 566162 . . . . . . . . . . 330 566189 . . . . . . . . . . 329 566190 . . . . . . . . . . 331 566201 . . . . . . . . . . 329 566212 . . . . . . . . . . 307 566246 . . . . . . . . . . 308 566275 . . . . . . . . . . 330 566307 . . . . . . . . . . 254 566314 . . . . . . . . . . 186 566409 . . . . . . . . . . 329 566413 . . . . . . . . . . 330 566688 . . . . . . 199, 305 568-450 . . . . . . . . . 1197 568-FACE-KIT . . . . 1203 568-FC-KIT . . . . . . 1202 568-FLANGE-KIT . 1203 568-KIT . . . . . . . . . 1202 568-SPLICE-KIT . . .1204 575-* . . . . . . 1198, 1199 575947 . . . . . . . . . . .349 575-KIT . . . . . . . . . .1204 575-PTFE-KIT-S . . .1205 590-* . . . . . . . . . . . . .841 59-001-01 . . . . . . . .1229 590283 . . . . . . . . . . .310 590536 . . . . . . . . . . .310 590538 . . . . . . . . . . .310 590540 . . . . . . . . . . .310 590716 . . . . . . . . . . .328 591-* . . . . . . . . . . . . .841 591151-* . . . . . . . . . . .88 5A0081 . . . . . . . . . . .144 5J-*-*SZ . . . . . . . . . .980 5J664-000-US0A . . .334 5JN-*Z . . . . . . . 964, 965 5JN9-*Z . . . . . . . . . . .970 5LEV108000 . . . . . . .222 5LEV110000 . 208, 226, 232 5N-*-*Z . . . . . . 951, 952 5N4-*Z . . . . . . . . . . . .956 5N9-*Z . . . . . . . 956, 957 5O-*-*Z . . . . . . . . . . .995 5ON-*-*OGZ . . . . . . .975 5ON-*-*Z . . . . . 973, 974 5STA120160 . . . . . . .218 5STA125190 . . 224, 228 5STA125220 . . . . . . .233 5STA130270 . . . . . . .237 5TIR108128 . . . . . . .224 5TIR108155 . . . . . . .218 5TIR108169 . . . . . . .224 5TIR108193 . . . . . . .218 5TIR108210 . . . . . . .224 5TIR108231 . . . . . . .218 5TIR108251 . . . . . . .224 5TIR108292 . . . . . . .224 5TIR108333 . . . . . . .224 5TIR110149 . . . . . . .228 5TIR110170 . . . . . . .233 5TIR110194 . . . . . . .228 5TIR110218 . . . . . . .233 5TIR110266 . . . . . . .233 5TIR110316 . . . . . . .233 5TIR110374 . . . . . . .228 5TIR110410 . . . . . . .233 5TIR110458 . . . . . . .233 5TIR110554 . . . . . . .233 5TIR112234 . . . . . . .237 5TIR112296 . . . . . . .237 5V08105350 . . 207, 216 5V08108360 . . . . . . .222 5V08110320 . . . . . . .226 5V08110701 . 208, 226, 232 5V11108000 . . . . . . .222 6000-ARO . . . . . . . .1253 601-* . . . . . . . . . . . . .387 606-1345-003-QA . . .164 60X* . . . . . . . . . . . . .904
Fluid Conveying
1302
Model Number Index

612105076 . . . . . . . . 216 612105343 . . . . . . . . 216 612-200-* . . . . . . . . 1182 612205001 . . . . . . . . 215 612-225-* . . . . . . . . 1182 612-250-* . . . . . . . . 1182 612-275-* . . . . . . . . 1182 612-300-* . . . . . . . . 1182 612305002 . . . . . . . . 217 612-325-* . . . . . . . . 1182 612-350-* . . . . . . . . 1182 612-375-* . . . . . . . . 1182 612-400-* . . . . . . . . 1182 612-450-* . . . . . . . . 1182 612-500-* . . . . . . . . 1182 612-550-* . . . . . . . . 1182 612-600-* . . . . . . . . 1182 612-700-* . . . . . . . . 1182 613105001 . . . . . . . . 222 613105301 . . . . . . . . 222 613205001 . . . . . . . . 221 613305001 . . . . . . . . 223 614166001 . . . . . . . . 226 614166302 . . . . . . . . 226 614266002 . . . . . . . . 225 614366002 . . . . . . . . 227 614374 . . . . . . . . . . . 179 614382 . . . . . . . . . . . 179 615027 . . . . . . . . . . . 311 616776 . . . . . . . . . . . 273 616780 . . . . . . . . . . . 274 617105001 . . . . . . . . 236 617119 . . . . . . . . . . . 265 617205009 . . . . . . . . 235 617305002 . . . . . . . . 237 618101006 . . . . . . . . 232 618105004 . . . . . . . . 232 618205001 . . . . . . . . 232 618205004 . . . . . . . . 231 618305003 . . . . . . . . 233 61CB . . . . . . . . . . . 1232 61X* . . . . . . . . . . . . . 904 624-* . . . . . . . 756, 1156 626933 . . . . . . . . . . . 111 62X* . . . . . . . . . . . . . 904 63 1008A * . . . . . . . . 389 63 1008AL * . . 388, 389, 390 6304-B . . . . . . . . . . 1252 631056 . . . . . . . . . . . 303 63-190600-* . . 813, 1128 63-190990-* . . 813, 1129 6320-3 . . . . . . . . . . 1256 637119-62-C . . . . . . 127 637140-11 . . . . . . . . 127 637141 . . . . . . . . . . . 127 6400-*-*-O . . . . 988, 989 640091-MONARCH . 158 6401-*-*-O . . . . . . . . 974 640110 . . . . . . . . . . . 158 6402-*-*-O . . . . . . . . 990 6404-*-* . . . . . . . . . . 973 6405-*-*-O . . . . 973, 974
6410-*-*O . . . . . 994, 995 6422-* . . . . . . . . . . . 155 6431-090 . . . . . . . . . 156 6433-* . . . . . . . . . . . 156 64X* . . . . . . . . . . . . . 906 6500-*-* . . . . . . 982, 983 6501-*-* . . . . . . . . . . 970 6504-* . . . . . . . . . . . 980 6505-*-* . . . . . . . . . . 966 6506-*-* . . . . . . . . . . 965 65X* . . . . . . . . . . . . . 905 6600-*-*-* . . . . . . . . . 985 663-*-FT . . . . . . . . . 702 663-12-* . . . . . . . . . . 747 663-16-* . . . . . . . . . . 747 663-4-* . . . . . . . . . . . 747 6635SPPP-BAG/TAG . . 1107 663-6-* . . . . . . . . . . . 747 663-8-* . . . . . . . . . . . 747 666053-* . . . . . . . . . 127 66605J-311 . . . . . . . 126 666100-362-C . . . . . 127 66X* . . . . . . . . . . . . . 905 66X*X* . . . . . . . . . . . 905 6801-*-*-NWO . 991, 992 6802-*-*-NWO . . . . . 990 6804-*-*-*-NWO . . . . 993 6805-*-*-NWO . . . . . 975 6806-*-*-NWO . . . . . 976 6807-*-*-NWO . . . . . 994 6809-*-*-NWO . . . . . 993 6810-*-*-NWO . . . . . 991 686-950 . . . . . . . . . . 401 68X* . . . . . . . . . . . . . 904 68X*X* . . . . . . . . . . . 904 6900-*-*-O . . . . . . . . 973 69005-1012 . . . . . . 1221 6901-*-*-NWO . . . . . 975 690506 . . . . . . . . . . . 108 694302 . . . . . . . . . . . 265 694400 . . . . . . . . . . . 321 694412 . . . . . . . . . . . 322 694414 . . . . . . . . . . . 322 694419 . . . . . . . . . . . 319 69X* . . . . . . . . . . . . . 905 69X*X* . . . . . . . . . . . 905 6F-*LNZ . . . . . . . . . . 947 6J-*LNZ . . . . . . . . . . 979 6J4-*LNZ . . . . . . . . . 981 6J9-*LNZ . . . . . . . . . 982 6NJ-*LNZ . . . . . . . . . 964 6X* . . . . . . . . . . . . . . 934 700-022 . . . . . . . . . . 152 70-008-01 . . . . . . . . 172 701-* . . . . . . . . . . . . 387 70-100-* . . . . . . . . . . 168 70-101-* . . . . . . . . . . 168 70-103-* . . . . . . . . . . 168 70-104-* . . . . . . . . . . 168 70-105-* . . . . . . . . . . 168 70-108-* . . . . . . . . . . 168 70-109-* . . . . . . . . . . 168
70122-RBB . . . . . . . 112 70122-RCA . . . . . . . 112 70122-RCW . . . . . . . 112 70142-938 . . . . . . . . 113 70160-902 . . . . . . . . 153 702X3 . . . . . . . . . . 1055 702X4 . . . . . . . . . . 1055 70300-603 . . . . . . . . 153 7032-*-* . . . . . . . . . 1011 70344-51 . . . . . . . . . 153 70360-900 . . . . . . . . 153 70402-649 . . . . . . . . 150 70422-915 . . . . . . . . 113 70423-617 . . . . . . . . 150 70423-RBT . . . . . . . 112 70523-900 . . . . . . . . 113 70523-LAB . . . . . . . 112 70553-RAB . . . . . . . 112 70-600-* . . . . . . . . . . 169 70-602-* . . . . . . . . . . 169 710-0091-032 . . . . . 100 7104 . . . . . . . . . . . . 867 711-0251-032 . . . . . 117 7113 . . . . . . . . . . . . 867 7114 . . . . . . . . . . . . 867 712-0156-032 . . . . . 117 712-0157-032 . . . . . 117 713-0068-032 . . . . . 117 714-0066-032 . . . . . 117 714-0067-032 . . . . . 117 714-0080-032 . . . . . 117 714-0081-032 . . . . . 117 7163 . . . . . . . . . . . . 431 7165 . . . . . . . . . . . . 431 7165A* . . . . . . . . . . . 884 7166 . . . . . . . . . . . . 431 7167 . . . . . . . . . . . . 431 7168 . . . . . . . . . . . . 431 720-* . . . . . . . . . . . . 860 720AR00236A . . . . . . 90 72400-RZX-04 . . . . . 153 7244 . . . . . . . . . . . . 867 7277-1052-5 . . . . . . 757 72X*X* . . . . . . . . . . . 906 730-* . . . . . . . . . . . . 863 73014-*S . . . 1000, 1142 73-104-* . . . . . . . . . . 169 7323 . . . . . . . . . . . . 867 7325 . . . . . . . . . . . . 867 7327 . . . . . . . . . . . . 867 7328 . . . . . . . . . . . . 867 7329 . . . . . . . . . . . . 867 7330 . . . . . . . . . . . . 867 7331 . . . . . . . . . . . . 867 7333 . . . . . . . . . . . . 867 736265 . . . . . . . . . . 348 736277 . . . . . . . . . . 349 7395 . . . . . . . . . . . . 425 7400 . . . . . . . . . . . . 431 7401 . . . . . . . . . . . . 431 74315-DAH . . . . . . . 150 74315-DCU . . . . . . . 150 74318-DBD . . . . . . . 150
74318-DFW . . . . . . . 150 74418-904 . . . . . . . . 150 745 . . . . . . . 1059, 1062 7505X* . . . . . . . . . . 885 7508 . . . . . . . . . . . . 327 759426272811 . . . . 388 76-101-* . . . . . . . . . 171 76-102-* . . . . . . . . . 171 76-103-* . . . . . . . . . 171 76-104-* . . . . . . . . . 171 7612-* . . . . . . . . . . 1148 7614-* . . . . . . . . . . 1148 7618-* . . . . . . . . . . 1148 76-600-* . . . . . . . . . 171 7705X* . . . . . . . . . . 883 7762SPP-BAG/TAG 1107 781-*-FT . . . . . . . . . 706 781-12-* . . . . . . . . . 748 781-16-* . . . . . . . . . 748 781-4-* . . . . . . . . . . 748 781-6-* . . . . . . . . . . 748 7818 . . . . . . . . . . . 1055 781-8-* . . . . . . . . . . 748 7903-04B04 . . . . . . . 795 7903-04V04 . . . . . . . 796 7903-06B06 . . . . . . . 795 7903-06V06 . . . . . . . 796 793-* . . . . . . . . . . . . 891 7N-*Z . . . . . . . . 954, 955 7N9-*PKZ . . . . . . . . 958 7NJ-*SZ . . . . . . . . . . 965 7NU-*SZ . . . . . . . . . 954 80016 . . . . . . . . . . 1222 801-* . . . . . . . . . . . . 387 8010 . . . . . . . . . . . . 437 8127SPP-BAG/TAG 1107 834150 . . . . . . . . . 1106 834152 . . . . . . . . . 1106 834153 . . . . . . . . . 1106 834154 . . . . . . . . . 1107 834155 . . . . . . . . . 1107 835-* . . . . . . . . . . . . 939 8426 . . . . . . . . . . . 1232 84740 . . . . . . . . . . . 395 85 . . . . . . . . . . . . . 1232 856238 . . . . . . . . . 1106 858995 . . . . . . . . . . 265 859159 . . . . . . . . . . 263 859161 . . . . . . . . . . 261 859172 . . . . . . . . . . 261 859176 . . . . . . . . . . 262 859726 . . . . . . . . . . 262 867315 . . . . . . . . . . 323 867332 . . . . . . . . . . 324 867364 . . . . . . . . . . 324 868978 . . . . . . . . . . 270 868982 . . . . . . . . . . 271 868983 . . . . . . . . . . 271 869777 . . . . . . . . . . 264 870017 . . . . . . . . . . 328 870024 . . . . . . . . . . 321 870039 . . . . . . . . . . 320 870040 . . . . . . . . . . 320
871702 . . . . . . . . . . .319 875/K . . . . . . . . . . . . .867 876712 . . . . . . . . . . .330 879135 . . . . . . . . . . .268 879141 . . . . . . . . . . .271 879143 . . . . . . . . . . .271 879159 . . . . . . . . . . .269 879237 . . . . . . . . . . .268 879239 . . . . . . . . . . .268 879242 . . . . . . . . . . .270 879249 . . . . . . . . . . .270 879260 . . . . . . . . . . .270 879279 . . . . . . . . . . .270 879280 . . . . . . . . . . .270 880002 . . . . . . . . . . .269 889185 . . . . . . . . . . .199 8SFO . . . . . . . . . . . .1097 9000-*-* . . . . . . . . . .1015 9003-*-* . . . . . . . . . .1013 9005-*-* . . . . . . . . . .1008 900564-*S . . . . . . . . .755 900568-*B . . . 815, 1130 900568-*C . . . 830, 1130 900598-*S . . . . . . . . .995 900599-*S . . . . . . . . .987 900605-*S . . . . . . . . .878 9007-*-* . . . . . . . . . .1011 900729-* . . . 1100, 1155 900952-* . . . . . . . . . .755 900-BOSS-KIT . . . .1202 900S34 . . . . . . . . . .1230 900SK . . . . . . . . . . .1230 9015-*-* . . . . . . . . . .1015 9021-*-* . . . . . . . . . .1008 9022-*-*-* . . . . . . . .1004 9023-*-* . . . . . . . . . .1011 9025-*-* . . . . . . . . . .1015 9026-*-* . . . . . . . . . . .981 9035-*-* . . . . . . . . . .1011 9040 . . . . . . . . . . . . .422 9040-*-* . . . . . . . . . .1015 9041 . . . . . . . . . . . . .422 9045-*-* . . . . . . . . . .1016 9052 . . . . . . . . . . . . .422 9052-* . . . . . . . . . . .1016 90532-6 . . . . . . . . . . .127 90533-2 . . . . . . . . . . .127 9055 . . . . . . . . . . . . .422 9060-*-* . . . . . . . . . .1016 9061-*-* . . . . . . . . . .1009 9063 . . . . . . . . . . . . .422 9065 . . . . . . . . . . . . .422 9069 . . . . . . . . . . . . .422 9071 . . . . . . . . . . . . .423 9075 . . . . . . . . . . . . .423 9090-*-*-* . . . . . . . .1016 9125-000F . . . . . . . .1180 9150-000F . . . . . . . .1180 915035Q . . . . . . . . .1236 9168S-PP-BAG . . . .1107 919191 . . . . . . . . . . .111 9200-000F . . . . . . . .1180 920015 . . . . . . . . . . . .97
1303
Model Number Index

Model Number Page Model Number Page Model Number Page Model Number Page Model Number Page 920021 . . . . . . . . . . . . 96 920025 . . . . . . . . . . . . 98 920040 . . . . . . . . . . . 118 920048 . . . . . . . . . . . 118 920056 . . . . . . . . . . . 118 920072 . . . . . . . . . . . 118 9203S-* . . . . . . . . . . 891 9210-0808 . . . . . . . 1009 9220-*-* . . . . . . . . . 1021 9222-* . . . . . . . . . . 1020 922733 . . . . . . . . . 91, 93 92280-* . . . . . . . . . . 644 922850 . . . . . . . . . . . . 94 922856 . . . . . . . . . . . 118 9231-* . . . . . . . . . . 1022 923163 . . . . . . . . . . . 149 923167 . . . . . . . . . . . 149 923174 . . . . . . . . . . . 118 9232-* . . . . . . . . . . 1022 923468 . . . . 87, 89, 116 923469 . . . . 87, 89, 116 923470 . . . . 87, 89, 116 923471 . . . . 87, 89, 116 923496 . . . . 87, 89, 116 923497 . . . . 87, 89, 116 923498 . . . . 87, 89, 116 923548 . . . . . . . . . 87, 89 923577 . . . . . . . . . . . 116 9236-*-* . . . . . . . . . 1022 923947 . . . . . . . . . . . 109 923948 . . . . . . . . . . . 109 9240-*-* . . . . . . . . . 1009 9247-*-*-* . . . . . . . . 1022 924710 . . . . . . . . . . . 380 9250-*-* . . . . . . . . . 1010 9250-000F . . . . . . . 1180 927 . . . . . . . . . . . . . . 433 927-CHANNELLOCK . . . 1232 9292-*-* . . . . . . . . . 1020 9300-000F . . . . . . . 1180 9302ST-GM1 . . . . . . 128 9303C-HM1C . . . . . . 129 9303C-HM4C . . . . . . 129 9336-* . . . . . . . . . . 1020 9337-*-* . . . . . . . . . 1021 938 . . . . . . . . . . . . . . 433 9392-*-* . . . . . . . . . 1022 9400-000F . . . . . . . 1180 941107 . . . . . . . 349, 350 94143-0450 . . . . . . . 862 94143-0550 . . . . . . . 862 9500-*MM . . . . . . . 1094 9575 . . . . . . . . . . . . . 425 9596 . . . . . . . . . . . . . 425 9605-*-* . . . . . . . . . 1003 9606-*-*-* . . . . . . . . 1003 9628 . . . . . . . . . . . . . 411 9633 . . . . . . . . . . . . . 425 9636 . . . . . . . . . . . . . 423 9637 . . . . . . . . . . . . . 423 9638 . . . . . . . . . . . . . 423 9642 . . . . . . . . . . . . . 424 9670 . . . . . . . . . . . . . 424 9671 . . . . . . . . . . . . . 424 9678 . . . . . . . . . . . . . 424 9679 . . . . . . . . . . . . . 424 9680 . . . . . . . . . . . . . 424 9681 . . . . . . . . . . . . . 424 9682 . . . . . . . . . . . . . 424 9683 . . . . . . . . . . . . . 424 9685 . . . . . . . . . . . . . 424 9689 . . . . . . . . . . . . . 424 9691 . . . . . . . . . . . . . 424 9699 . . . . . . . . . . . . . 424 9754 . . . . . . . . . . . . . 421 9756 . . . . . . . . . . . . . 421 9757 . . . . . . . . . . . . . 421 9758 . . . . . . . . . . . . . 421 9764 . . . . . . . . . . . . . 421 9765 . . . . . . . . . . . . . 421 9766 . . . . . . . . . . . . . 421 9767 . . . . . . . . . . . . . 421 9769 . . . . . . . . . . . . . 421 9771 . . . . . . . . . . . . . 421 9775 . . . . . . . . . . . . . 421 9777 . . . . . . . . . . . . . 421 9778 . . . . . . . . . . . . . 421 9795 . . . . . . . . . . . . . 422 9796 . . . . . . . . . . . . . 422 9798 . . . . . . . . . . . . . 422 9900101-000 . . . . . . 137 9900158-000 . . . . . . 163 999-00948 . . . . . . . . 122 9999-* . . . . . . . . . . 1020 9F-*GMZ . . . . . . . . . 949 AI-CG3-3KT-SS . . . . 386 AI-S-305 . . . . . . . . . 385 AJ-*Z . . . . . . . . . . . . 984 AJ6JJ-*LNZ . . . . . . . 984 AJJ6J-*LNZ . . . . . . . 985 AJJN-*Z . . . . . . . . . . 971 AJJO-*OGZ . . . . . . . 993 AJNJ-*Z . . . . . . . . . . 971 AJOJ-*OGZ . . . . . . . 993 AL456 . . . . . . . . . . 1236 AL457 . . . . . . . . . . 1236 AL-A* . . . . . . . . . . . . 848 AL-B* . . . . . . . . . . . . 848 AL-C* . . . . . . . . . . . . 847 AL-D* . . . . . . . . . . . . 849 AL-DC* . . . . . . . . . . 849 AL-DP* . . . . . . . . . . 849 AL-E* . . . . . . . . . . . . 848 AL-F* . . . . . . . . . . . . 848 AN-* . . . . . . . . . . . . 1182 AO755-* . . . . . . . . . . 209 APP104 . . . . . . . . . 1225 AQ68-P-* . . . . . . . . . 917 AQ69-PS-* . . . . . . . . 917 AQ71-PS-* . . . . . . . . 918 AQ72-PS-* . . . . . . . . 918 AQ86-P-* . . . . . . . . . 918 AR-400 . . . . . . . . . . 404 AR-630 . . . . . . . . . . 405 AS-*-GP-* . . . . . . . 1091 ASX-*-GP-* . . . . . . 1091 AT0001 . . . . . . . . . 1225 ATC001 . . . . . . . . . 1225 ATF . . . . . . . . . . . . 1243 ATG005 . . . . . . . . . 1225 ATS001 . . . . . . . . . 1225 A-XXX (O-Ring) . . .1192, 1193, 1194, 1195, 1196, . . . . . . . . . . . . . . . . 1197 A-XXX-90D (O-Ring) . . . 1197 B-50-10SAE . . . . . . 290 B52750 . . . . . . . . . 1252 B52751 . . . . . . . . . 1252 B52752 . . . . . . . . . 1252 B6509-D . . . . . . . . 1252 B6509-E . . . . . . . . 1252 B6783 . . . . . . . . . . 1255 BBVM* . . . . . . . . . . . 170 BF-2043 . . . . . . . . . 375 BFP-* . . . . . . . . . . . 1096 BJ-*Z . . . . . . . . . . . . 985 BK255654 . . . . . . . . 328 BK466851 . . . . . . . . 328 BK466853 . . . . . . . . 328 BK590716 . . . . . . . . 328 BK870017 . . . . . . . . 328 BKDG01-633 . . . . . . 328 BKE-4-50M . . . . . . . 328 BL-* . . . . . . . . . 876, 877 BLUE-C-E-* . . . . . . . 751 BQ-1280 . . . . . . . . . 632 BR110 . . . . . . . . . . . 379 BR210 . . . . . . . . . . . 378 BR310 . . . . . . . . . . . 379 BRGHT050 . . . . . . . 841 BST-* . . . . . . . . . . . . 842 BT10060 . . . . . . . . 1183 BT10860 . . . . . . . . 1183 BT20060 . . . . . . . . 1183 BUNA* . . . . . . . . . . . 849 BV225IMPTESS . . 1232 B-XXX (O-Ring) . . . 1099 C556C . . . . . . . . . . . .407 C55C . . . . . . . . . . . . .406 C57C . . . . . . . . . . . . .406 C59C . . . . . . . . . . . . .406 C5GV-* . . . . . . . . . . .179 C-604 . . . . . . . . . . . .404 C604K . . . . . . . . . . . .404 C604K1 . . . . . . . . . . .404 C9612-3 . . . . . . . . . .399 CAHA3/4X50R300P .750 CAHA3/4X50R300PS . . . 750 CAT33P-000-N . . . . .643 CAT44P-000-N . . . . .643 CB/* . . . . . . . . . . . . .1017 CBV1-10* . . . . 193, 313 CBV1-12-* . . . . . . . . .195 CDN . . . .643, 645, 648 CDW . . . .643, 645, 648 CF-*Z . . . . . . . . . . . .948 CG2V-8* . . . . . . . . . .311 CH-604 . . . . . . . . . . .404 CHW-30 . . . . . . . . . .643 CI-12 . . . 344, 345, 347, 353 CI-20 . . . 344, 345, 347, 353 CJ-*Z . . . . . . . . . . . . .986 CMMQ* . . . . . . . . . . .175 CP-* . . . . . . . . . . . .1023 CRV-10-* . . . . . . . . . .199 CSN . . . .643, 646, 648 CT-06-* . . . . . . . . . . .310 CT-10-* . . . . . . . . . . .310 CTC-* . . . . . 1185, 1203 CV2-20-* . . . . . . . . . .177 CVH05-* . . . . . . . . . .177 CVI-* . . . . . . . . . . . . .318 CXAH-*-ORS . . . . . .666
Fluid Conveying
A
A-012-BROWN-VITON . 1197 A-06JSM . . . . . . . . 1020 A13100-3 . . . . . . . . . 385 A1QT3100-3 . . . . . . 385 A212PS . . . . . . . . . . 642 A212SD-000-N . . . . 645 A212SS-000-N . . . . 645 A29E-* . . . . . . . . . . . 840 A323W . . . . . . . . . . . 313 A800-* . . . . . . . . . . 1050 ABF* . . . . . . . . . . . . 846 ABM* . . . . . . . . . . . . 846 A-D03-CP-P . . . . . . . 338 A-D03-P-* . . . . . . . . 337 A-D03-SP-* . . . . . . . 336 A-D05-P-* . . . . . . . . 339 A-D05-SP-* . . . . . . . 338 AF5422SPPSIP-BAG . . 1107 AH-* . . . . . . . . . . . . . 849 AH-630 . . . . . . . . . . 405 AHG-75 . . . . . . . . . . 853 AHS230 . . . . . . . . . 1235 AI-10-3KT . . . . . . . . 385 AI-1-3KT . . . . . . . . . 385 AI-2.5-3KT . . . . . . . . 385 AI-5-3KT . . . . . . . . . 385
C
C1006C . . . . . . . . . . c1010c . . . . . . . . . . . c101c . . . . . . . . . . . . C102C . . . . . . . . . . . C104C . . . . . . . . . . . C106C . . . . . . . . . . . C108C . . . . . . . . . . . C152C . . . . . . . . . . . C156C . . . . . . . . . . . C-175-* . . . . . . . . . . C2-* . . . . . . . . . . . . . C205 . . . . . . . . . . . . C20B . . . . . . . . . . . . C2510C . . . . . . . . . . C2514C . . . . . . . . . . C252C . . . . . . . . . . . C254C . . . . . . . . . . . C255 . . . . . . . . . . . . C256C . . . . . . . . . . . C28 . . . . . . . . . . . . . C30B . . . . . . . . . . . . C38121-800 . . . . . . C38221-800 . . . . . . C38331-800 . . . . . . C38341-800 . . . . . . C51C . . . . . . . . . . . . C53C . . . . . . . . . . . . C5513C . . . . . . . . . . C554C . . . . . . . . . . . 407 407 406 406 406 406 406 407 407 303 178 865 173 407 407 407 407 865 407 653 173 656 656 656 656 406 406 407 407
D
D104 . . . . . . . . . . . .1230 DBF12X1.5 . . . . . . .1148 DBF14X1.5 . . . . . . .1148 DC2 . . . . . . . . . . . . .1064 DC2042 . . . . . . . . . .1059 DC2044 . . . . . . . . . .1059 DC6 . . . . . . . . . . . . .1064 DCP2144 . . . . . . . .1060 DCP2502 . . . . . . . .1060 DCP7 . . . . . . . . . . .1064 DENSYL-TAPE-2IN 1227 DFVS35 . . . . . . . . . .131 DG17V-3* . . . . . . . . .203 DG4S4* . 268, 269, 270, 275, . . . . . . . . . . . . . .276 DG4S4-* .268, 269, 270 DG4V-3* 261, 262, 263, . . . . . . . . . . . . . 264, 267 DG4V-3-* . . . . . . . . .266 DG4V-3S . . . . . . . . . .261 DG4V-3S* . . . 261, 262, 263, . . . . . . . . . . . . . .264
B
B075 . . . . . . . . . . . . 381 B099 . . . . . . . . . . . . 381 B-100-* . . . . . . . . . . 291 B10623 . . . . . . . . . . 201 B10630 . . . . . . . . . . 197 B10805 . . . . . . . . . . 190 B11-100 . . . . . . . . . . 220 B11946 . . . . . . . . . . 196 B1610-BL . . . . . . . 1253 B-1613-B . . . . . . . . 1253 B1627-B . . . . . . . . 1253 B1641-B . . . . . . . . 1253 B1688-B . . . . . . . . 1253 B24257 . . . . . . . . . . 189 B28 . . . . . . . . . . . . . 652 B315790 . . . . . . . . 1255 B315791 . . . . . . . . 1255 B331107 . . . . . . . . 1252 B337595-A1 . . . . . 1251 B-50-* . . . . . . . . . . . 290
1304
Model Number Index

Model Number Page Model Number Page 397 295 295 295 295 295 295 295 295 295 295 282 Model Number FBE1734 FBE1812 FBE1833 FBE1834 FBE2003 FBE2004 FBE2005 FBE2007 FBE2008 FBE2011 FBE2024 FBE2035 FBE4022 FBE4023 FBE4024 FBE4032 FBE4034 FBF0600 FBF0800 FBF1000 FBM1001 FBM1002 FBM1003 FBM1004 FBM1005 FBM1011 FBM1012 FBM1013 FBM1014 FBM1015 FBM1016 FBM1017 FBM1021 FBM1031 FBM1070 FBM1076 FBM1083 FBM1084 FBM1103 FBM1130 FBM1140 FBM1146 FBM1147 FBM1150 FBM1151 FBM1153 FBM1512 FBM1513 FBM1514 FBM1515 FBM1522 FBM1523 FBM1524 FBM1532 FBM1533 FBM1534 FBM1535 FBM1542 FBM1554 FBM1555 FBM1562 FBM1563 FBM1564 ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ . . . . 830, . . . . 830, . . . . 830, ........ . . . . 830, . . . . 830, ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Page 1127 1127 1127 1127 1137 1137 1137 1137 1137 1137 1138 1138 1121 1121 1121 1121 1121 1118 1118 1118 1154 1154 1154 1154 1154 1120 1120 1120 1120 1120 1120 1120 1121 1122 1122 1120 1122 1122 1128 1128 1128 1128 1120 1129 1129 1150 1124 1124 1124 1124 1124 1124 1124 1125 1125 1125 1125 1125 1126 1126 1126 1126 1126 Model Number FBM1565 FBM2000 FBM2001 FBM2002 FBM2003 FBM2004 FBM2005 FBM2006 FBM2007 FBM2008 FBM2009 FBM2010 FBM2011 FBM2012 FBM2013 FBM2015 FBM2017 FBM2020 FBM2021 FBM2022 FBM2023 FBM2024 FBM2026 FBM2030 FBM2031 FBM2032 FBM2033 FBM2034 FBM2035 FBM2037 FBM2038 FBM2039 FBM2040 FBM2041 FBM2048 FBM2049 FBM2051 FBM2052 FBM2053 FBM2054 FBM2055 FBM2056 FBM2060 FBM2061 FBM2062 FBM2063 FBM2064 FBM2065 FBM2066 FBM2071 FBM2072 FBM2073 FBM2074 FBM2075 FBM2076 FBM2081 FBM2082 FBM2084 FBM2085 FBM2091 FBM2093 FBM2099 FBM2100 ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Page 1126 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1138 1133 1133 1132 1132 1132 1132 1132 1132 1133 1133 1133 1133 1133 1133 1133 1136 1136 1136 1136 1136 1136 1136 1136 1136 1136 1136 1136 1137 1137 Model Number FBM2103 FBM2104 FBM2105 FBM2106 FBM2108 FBM2110 FBM2112 FBM2113 FBM2114 FBM2116 FBM2117 FBM2119 FBM2120 FBM2121 FBM2122 FBM2124 FBM2126 FBM2129 FBM2131 FBM2132 FBM2133 FBM2135 FBM2136 FBM2137 FBM2138 FBM2139 FBM2140 FBM2142 FBM2143 FBM2144 FBM2145 FBM2147 FBM2150 FBM2151 FBM2152 FBM2156 FBM2160 FBM2162 FBM2163 FBM2166 FBM2167 FBM2175 FBM2178 FBM2179 FBM2180 FBM2181 FBM2183 FBM2184 FBM2185 FBM2187 FBM2190 FBM2191 FBM2192 FBM2239 FBM2240 FBM2244 FBM2245 FBM2246 FBM2254 FBM2255 FBM2256 FBM2257 FBM2277 Page
DG4V4-* . . . . . . . . . 272 DG4V-5-* . . . . . 273, 274 DG5V-10-* . . . . . . . . 278 DG5V-8-* . . . . . . . . . 277 DGMC2-3-* . . . . . . . 319 DGMC-3-* . . . . . . . . 319 DGMC-5-* . . . . . . . . 323 DGMDC3-* . . . . . . . . 321 DGMFN-3* . . . . . . . . 322 DGMFN-5* . . . . . . . . 324 DGMPC-3* . . . . . . . . 321 DGMPC-3-* . . . . . . . 321 DGMPC-5-* . . . . . . . 324 DGMX2-3* . . . . . . . . 320 DGVM-3* . . . . . . . . . 337 DHR-249-1-1-30 . . . 395 DL36ICS . . . . . . . . 1236 DM-640-25-ZR-M-T-200 121 DMD-25-Z-L-MS-20 . 121 DMD-400-20-ZL-200 120 DMR40020ZL200 . . 120 DP8 . . . . . . . 1103, 1104 DPC1-10* . . . . . . . . . 186 DPS2-20-* . . . . . . . . 289 DSV2-8-* . . . . . . . . . 326 DT8P1-* . . . . . . . . . . 176 DTE-13 . . . . . . . . . 1239 DTE-24 . . . . . . . . . 1240 DTE-25 . . . . . . . . . 1240
EK-712-T . . . . . . . . . EN10B . . . . . . . . . . . EN10S . . . . . . . . . . . EN20B . . . . . . . . . . . EN20S . . . . . . . . . . . EN25B . . . . . . . . . . . EN25S . . . . . . . . . . . EN30B . . . . . . . . . . . EN30S . . . . . . . . . . . EN35B . . . . . . . . . . . EN35S . . . . . . . . . . . EPC* . . . . . . . . . . . .
F
F10B . . . . . . . . . . . . 279 F14 . . . . . . . . . . . . . 865 F14* . . . . . . . . . . . . . 662 F15M10X1.0 . . . . . 1148 F15M12X1.5 . . . . . 1148 F15M14X1.5 . . . . . 1148 F15M16X1.5 . . . . . 1148 F15M18X1.5 . . . . . 1148 F15M22X1.5 . . . . . 1148 F18 . . . . . . . . . . . . 1227 F20B . . . . . . . . . . . . 279 F20S . . . . . . . . . . . . 279 F22* . . . . . . . . . . . . . 662 F25B . . . . . . . . . . . . 279 F25S . . . . . . . . . . . . 279 F28 . . . . . . . . . . . . 1227 F30S . . . . . . . . . . . . 279 F32* . . . . . . . . . . . . . 662 F35121-400 . . . . . . . 657 F35221-400 . . . . . . . 657 F35331-400 . . . . . . . 657 F35331-410 . . . . . . . 657 F35341-400 . . . . . . . 657 F35341-410 . . . . . . . 657 F35451-420 . . . . . . . 657 F38 . . . . . . . . . . . . 1227 F42* . . . . . . . . . . . . . 662 F48 . . . . . . . . . . . . 1227 F901X* . . . . . . . . . . . 665 FBA* . . . . . . . . . . . 1116 FB-A-10 . . . . . . . . . . 130 FB-B-10 . . . . . . . . . . 130 FB-C-10 . . . . . . . . . . 130 FBE1012 . . . . . . . . 1120 FBE1013 . . . . . . . . 1120 FBE1512 . . . . . . . . 1124 FBE1513 . . . . . . . . 1124 FBE1514 . . . . . . . . 1124 FBE1522 . . . . . . . . 1125 FBE1523 . . . . . . . . 1125 FBE1524 . . . . . . . . 1125 FBE1532 . . . . . . . . 1125 FBE1533 . . . . . . . . 1125 FBE1534 . . . . . . . . 1125 FBE1712 . . . . . . . . 1127 FBE1713 . . . . . . . . 1127 FBE1714 . . . . . . . . 1127 FBE1722 . . . . . . . . 1127 FBE1732 . . . . . . . . 1127
E
E1* . . . . . . . . . . . . . . 355 E212FS . . . . . . . . . . 640 E212LM . . . . . . . . . . 640 E312LS . . . . . . . . . . 640 EAL224H . . . . . . . . 1241 EC10B . . . . . . . . . . . 174 EC20S . . . . . . . . . . . 174 EC40S . . . . . . . . . . . 174 EDC25B . . . . . . . . . . 174 EDC25S . . . . . . . . . . 174 EDC30B . . . . . . . . . . 174 EDC30S . . . . . . . . . . 174 EDC35B . . . . . . . . . . 174 EDC35S . . . . . . . . . . 174 EF10B . . . . . . . . . . . 280 EF10S . . . . . . . . . . . 280 EF20B . . . . . . . . . . . 280 EF20S . . . . . . . . . . . 280 EF25B . . . . . . . . . . . 280 EF25S . . . . . . . . . . . 280 EF30B . . . . . . . . . . . 280 EF30S . . . . . . . . . . . 280 EF35B . . . . . . . . . . . 280 EF35S . . . . . . . . . . . 280 EFM620S . . . . . . . . . 280 EFM825S . . . . . . . . . 280 EH049*-* . . . . . . . . . 876 EH04905-150R . . . . 876 EH08904-125R . . . . 738 EH08906-75R . . . . . 738 EHH-AMP-* . . . . . . . 340
. . . . . . . .1137 . . . . . . . .1137 . . . . . . . .1137 . . . . . . . .1137 . . . . . . . .1147 . . . . . . . .1146 . . . . . . . .1146 . . . . . . . .1146 . . . . . . . .1146 . . . . . . . .1146 . . . . . . . .1136 . . . . . . . .1134 . . . . . . . .1134 . . . . . . . .1139 . . . . . . . .1139 . . . . . . . .1139 . . . . . . . .1139 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1140 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1141 . . . . . . . .1133 . . . . . . . .1133 . . . . . . . .1133 . . . . . . . .1133 . . . . . . . .1133 . . . . . . . .1133 . . . . . . . .1134 . . . . . . . .1147 . . . . . . . .1147 . . . . . . . .1136 . . . . . . . .1147 . . . . . . . .1147 . . . . . . . .1147 . . . . . . . .1147 . . . . . . . .1139 . . . . . . . .1134 . . . . . . . .1134 . . . . . . . .1146 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1140 . . . . . . . .1134 . . . . . . . .1134 . . . . . . . .1134 . . . . . . . .1134 . . . . . . . .1138
1305
Model Number Index

Model Number FBM2283 FBM2284 FBM2403 FBM2404 FBM2405 FBM2406 FBM2608 FBM2609 FBM2769 FBM2770 FBM2799 FBM2800 FBM2815 FBM2909 FBM2914 FBM2915 FBM2916 FBM2917 FBM2921 FBM2922 FBM2923 FBM2925 FBM2926 FBM2927 FBM2929 FBM2930 FBM2931 FBM2933 FBM2936 FBM2937 FBM2939 FBM2940 FBM2941 FBM2943 FBM2945 FBM2947 FBM2948 FBM2949 FBM2953 FBM2954 FBM2955 FBM2956 FBM2963 FBM2964 FBM2965 FBM2966 FBM2971 FBM2973 FBM2974 FBM2978 FBM2979 FBM2980 FBM2981 FBM3091 FBM3092 FBM3148 FBM3155 FBM3157 FBM3402 FBM3403 FBM3404 FBM3407 FBM3409 Page Model Number FBM3513 FBM3514 FBM3515 FBM3516 FBM3554 FBM3555 FBM3556 FBM3627 FBM3642 FBM3669 FBM3670 FBM3671 FBM3672 FBM3675 FBM3676 FBM3684 FBM3685 FBM3686 FBM3687 FBM3712 FBM3713 FBM3714 FBM3715 FBM3717 FBM3718 FBM3724 FBM3725 FBM3726 FBM3740 FBM3741 FBM3742 FBM3743 FBM3744 FBM3749 FBM3751 FBM3752 FBM4022 FBM4023 FBM4024 FBM4025 FBM4026 FBM4032 FBM4033 FBM4034 FBM4035 FBM4036 FBM4042 FBM4043 FBM4044 FBM4045 FBM4046 FBM4052 FBM4053 FBM4055 FBM4056 FBM4062 FBM4063 FBM4064 FBM4065 FBM4072 FBM4075 FBM4076 FBM4082 ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Page 1155 1155 1155 1155 1135 1135 1137 1155 1155 1135 1135 1135 1135 1135 1135 1141 1141 1141 1141 1134 1134 1134 1134 1134 1134 1135 1135 1135 1135 1135 1135 1135 1135 1141 1135 1135 1120 1120 1120 1120 1120 1121 1121 1121 1121 1121 1122 1122 1122 1122 1122 1122 1122 1122 1122 1122 1122 1122 1122 1120 1120 1120 1121 Model Number Page Model Number Page Model Number Page . . . . . . . . 1134 . . . . . . . . 1134 . . . . . . . . 1142 . . . . . . . . 1142 . . . . . . . . 1142 . . . . . . . . 1142 . . . . . . . . 1139 . . . . . . . . 1139 . . . . . . . . 1136 . . . . . . . . 1136 . . . . . . . . 1136 . . . . . . . . 1136 . . . . . . . . 1136 . . . . . . . . 1143 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1145 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1143 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1144 . . . . . . . . 1133 . . . . . . . . 1133 . . . . . . . . 1133 . . . . . . . . 1133 . . . . . . . . 1139 . . . . . . . . 1139 . . . . . . . . 1139 . . . . . . . . 1144 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1132 . . . . . . . . 1132 . . . . 814, 1130 . . . . 814, 1130 . . . . . . . . 1133 . . . . . . . . 1133 . . . . . . . . 1133 . . . . . . . . . 752 . . . . . . . . . 752 . . . . . . . . . 752 . . . . . . . . . 752 . . . . . . . . . 752 FBM4083 . . . . . . . . 1121 FBM4084 . . . . . . . . 1121 FBM4085 . . . . . . . . 1121 FBM4121 . . . . . . . . 1123 FBM4127 . . . . . . . . 1123 FBM4131 . . . . . . . . 1123 FBM4137 . . . . . . . . 1123 FBM4211 . . . . . . . . 1123 FBM4212 . . . . . . . . 1123 FBM4213 . . . . . . . . 1123 FBM4214 . . . . . . . . 1123 FBM4222 . . . . . . . . 1123 FBM4223 . . . . . . . . 1123 FBM4224 . . . . . . . . 1123 FBM4225 . . . . . . . . 1123 FBM4226 . . . . . . . . 1123 FBM4232 . . . . . . . . 1123 FBM4233 . . . . . . . . 1123 FBM4234 . . . . . . . . 1123 FBM4235 . . . . . . . . 1123 FBM4254 . . . . . . . . 1123 FBM4263 . . . . . . . . 1124 FBM4412 . . . . . . . . 1120 FBM4413 . . . . . . . . 1120 FBM4422 . . . . . . . . 1120 FBM4423 . . . . . . . . 1120 FBM4424 . . . . . . . . 1120 FBM4425 . . . . . . . . 1120 FBM4432 . . . . . . . . 1121 FBM4433 . . . . . . . . 1121 FBM4434 . . . . . . . . 1121 FBM4435 . . . . . . . . 1121 FBM5002 . . . . . . . . 1137 FBM5003 . . . . . . . . 1137 FBM5008 . . . . . . . . 1137 FBM5009 . . . . . . . . 1137 FBM5011 . . . . . . . . 1137 FBM5032 . . . . . . . . 1138 FBM5033 . . . . . . . . 1138 FBM5034 . . . . . . . . 1138 FBM5037 . . . . . . . . 1138 FBM5038 . . . . . . . . 1138 FBM5040 . . . . . . . . 1138 FBR-035 . . . . . . . . . 376 FBR2400 . . . . . . . . 1154 FBU0400 . . . . . . . . 1116 FBU0600 . . . . . . . . 1116 FBU0800 . . . . . . . . 1116 FBU1000 . . . . . . . . 1116 FBU1200 . . . . . . . . 1117 FBU1600 . . . . . . . . 1117 FBV0400 . . . . 721, 1117 FBV0600 . . . . 721, 1117 FBV0800 . . . . 721, 1117 FBV1000 . . . . 721, 1117 FBV1200 . . . . 721, 1117 FBV21200001MLD . 170 FBV21240001M/LD . 170 FC095-* . . . . . . . . . . 381 FC100-* . . . . . . . . . . 381 FC110-* . . . . . . . . . . 381 FC1229-* . . . . . . . . . 941 FC1347-*-329 . . . . . 826 FC1347-*S . . . . . . . 799 FC1349-*-259 . . . . . 826 FC1349-*S . . . . . . . 799 FC195-* . . . . . . . . . . 708 FC2326-* . . . . . . . . . 941 FC234-* . . . . . . . . . . 733 FC254-* . . . . . . . . . . 711 FC2875-* . . . . . . . . . 879 FC300-* . . . . . 703, 1119 FC321-* . . . . . . . . . . 742 FC332-* . . . . . 721, 1117 FC3443-*C . . . . . . . 825 FC3443-*S . . . . . . . 798 FC350-* . . . . . . . . . . 739 FC355-* . . . . . . . . . . 740 FC3596-*C . . . . . . . 825 FC3596-*S . . . . . . . 798 FC3680-*S . . . . . . . 798 FC373-* . . . . . . . . . . 713 FC374-* . . . . . . . . . . 715 FC4098-*S . . . . . . . 798 FC500-* . . . . . . . . . . 710 FC-51-* . . . . . . . . . . 287 FC558-* . . . . . . . . . . 744 FC579-* . . . . . . . . . . 743 FC5805-*S . . . . . . . 793 FC5810-*S . . . . . . . 793 FC5847-*S . . 810, 1125 FC5849-*S . . 810, 1125 FC5853-*S . . . . . . . 810 FC5985-*S . . . . . . . 808 FC5986-*S . . . . . . . 808 FC5988-*S . . . . . . . 808 FC606-* . . . . . . . . . . 712 FC619-* . . . . . . . . . . 699 FC636-* . . . . . . . . . . 711 FC639-* . . . . . . . . . . 705 FC647-* . . . . . . . . . . 722 FC676-* . . . . . . . . . . 759 FC693-* . . . . . . . . . . 709 FC7662-*S . . . . . . . 805 FC7988-*S . . . . . . . 806 FC8779-*-333 . . . . . 825 FC8779-*S . . . . . . . 798 FC9062-*S . . 815, 1129 FC9171-*S . . 814, 1129 FC9341-*-*S . 813, 1129 FCG-02-* . . . . . . . . . 286 FCM3661 . . . . . . . 1157 FCR-51-* . . . . . . . . . 288 FCV7-10-* . . . . . . . . 283 FD14-4002-*-* . . . . 1081, 1150 FD14-4003-*-* . . . . 1081, 1150 FD40-1013-*-* . . . . 1059 FD40-1014-*-* . . . . 1060 FD40-1054-*-* . . . . 1058 FD41-1013-*-* . . . . 1062 FD42-1002-*-* . . . . 1071 FD43-1001-*-* . . . . 1063 FD45-1040-* . . . . . 1073 FD45-1041-* . . . . . 1073 FD45-1086-*-* . . . . .1074 FD45-1101-*-* . . . . .1074 FD69-1001-*-* . . . . .1082 FD69-1002-*-* . . . . .1082 FD72-1001-*-* . . . . .1079 FD76-1002-*-* . . . . .1080 FD89-1001-*-* . . . . .1076 FD89-1002-*-* . . . . .1077 FD89-1008-*-* . . . . .1077 FD89-1009-* . . . . . .1077 FD90-1012-*-* . . . . 1084, 1151 FD90-1021-*-* . . . . 1083, 1151, . . . . . . . . . . . .1153 FD90-1034-*-* . . . . 1083, 1151 FD90-1040-* 1084, 1151 FD90-1044-*-* . . . . 1083, 1151 FD90-1046-*-* . . . . .1084 FDC1-10-* . . . . . . . . .292 FE-* . . . . . . . . . . . . . .852 FF-* . . . . . . . . . . . . .1025 FF082-* . . . . . . . . . .1070 FF1010-*S . . . . 994, 995 FF1162-*S . . . . . . . . .977 FF12139 . . . . . . . . . .824 FF12262-* . . . . . . . . .823 FF13267 . . . . . . . . . .927 FF13268 . . . . . . . . . .927 FF13269 . . . . . . . . . .927 FF13270 . . . . . . . . . .927 FF13271 . . . . . . . . . .927 FF13272 . . . . . . . . . .927 FF13273 . . . . . . . . . .927 FF13570 . . . . . . . . . .927 FF13571 . . . . . . . . . .927 FF13727-* . . . . . . . . .823 FF1851T-*S . . . . . . .941 FF1852T*S . . . . . . . .942 FF1854T*S . . . . . . . .942 FF1865T*S . . . . . . . .943 FF1868T*S . . . . . . . .943 FF1898T*S . . . . . . . .948 FF1980-*-* . . . . . . .1002 FF1981-*-* . . . . . . .1002 FF1994T* . . . . . . . . .947 FF2000T*S . . . . . . . .947 FF2031T*S . . . . . . . .945 FF2032T*S . . . . . . . .945 FF2068T*S . . . . . . . .942 FF2093T*S . . . . . . . .945 FF2098T*S . . . . . . . .948 FF2114T*S . . . . . . . .948 FF2138-*S . . . . . . . . .995 FF2227T*S . . . . . . . .943 FF2281T*S . . . . . . . .947 FF5162-*S . . . . . . . . .998 FF5163-*S . . . . . . . . .983 FF5239-*S . . . . . . . . .997 FF5540-*S . . . . . . . . .998 FF5541-*S . . . . . . . . .998 FF593-* . . . . . . . . . .1097
Fluid Conveying
1306
Model Number Index

FF5945T*S . . . . . . . 999 FF595-* . . . . . . . . . 1097 FF90103-*S . . . . . . . 881 FF90178-* . . . . . . . 1099 FF90192-* . . . . . . . . 824 FF90213-* . . . . . . . . 752 FF90319-* . . . . . . . 1098 FF90522-* . . . . . . . . 760 FF90526-* . . . . . . . . 759 FF9075-* . . . . . . . . . 882 FF9217-*S . . . . . . . . 756 FF9446-11 . . . . . . . 1098 FF9446-12 . . . . . . . 1098 FF9446-14 . . . . . . . 1098 FF9446-16 . . . . . . . 1098 FF9446-18 . . . . . . . 1098 FF9446-21 . . . . . . . 1098 FF9446-210 . . . . . . 1098 FF9446-214 . . . . . . 1098 FF9446-219 . . . . . . 1098 FF9446-222 . . . . . . 1098 FF9446-225 . . . . . . 1098 FF9446-228 . . . . . . 1098 FF9446-25 . . . . . . . 1098 FF9605-*S . . . . . . . . 879 FF9767-*S . . . . . . . . 949 FF9863-*S . . . . . . . . 949 FFF-* . . . . . . . . . . . 1025 FFFF-* . . . . . . . . . . 1026 FFM-* . . . . . . . . . . . 1025 FHE-75 . . . . . . . . . . 852 FJ3012-*-*S . . . . . . . 818 FJ3013-*-*S . . . . . . . 818 FJ3019-*-*S . . . . . . . 821 FJ3026-*S . . . . . . . . 820 FJ3045-*S . . . . . . . . 821 FJ3052-*S . . . . . . . . 821 FJ3053-*S . . . . . . . . 817 FJ3054-*S . . . . . . . . 817 FJ3055-*-*S . . . . . . . 818 FJ3057-*-*S . . . . . . . 822 FJ3059-*-*S . . . . . . . 822 FJ3116-*-*S . . . . . . . 821 FJ3133-*-*S . . . . . . . 822 FJ3134-*-*S . . . . . . . 821 FJ3149-*-*S . . . . . . . 822 FJ3162-*S . . . . . . . . 819 FJ3171-*-*S . . . . . . . 820 FJ3225-*S . . . . . . . . 823 FJ3288-*-*S . . . . . . . 819 FJ3289-*-*S . . . . . . . 819 FJ3337-*B . . . . . . . . 831 FJ3383-*S . . . . . . . . 793 FJ5100-*S . . . . . . . . 809 FJ5984-*S . . . . . . . . 817 FJ5985-*S . . . . . . . . 818 FJ5986-*S . . . . . . . . 820 FJ5994-*-*S . . . . . . . 819 FJ5995-*S . . . . . . . . 820 FJ7044-*S . . . . . . . . 811 FJ9068-*S . . . . . . . . 810 FJ9121-*S . . . . . . . . 790 FJ9122-*S . . . . . . . . 790
FJ9132-*S . . . . . . . . 790 FJ9706-*S . . . . . . . . 804 FJ9707-*S . . . . . . . . 804 FJ9708-*S . . . . . . . . 805 FLX5526-* . . . . . . . . 741 FLX5581-* . . . . 741, 742 FMF-* . . . . . . . . . . . 1026 FN-* . . . . . . . . . . . . . 280 FNB75S . . . . . . . . . 1231 FRH1AT-* . . . . . . . . 702 FS1700-*-* . . . . . . . . 999 FS2403-*-* . . . . . . . . 947 FS2404-*-* . . . . . . . . 945 FS59005-*-* . . . . . . 1112 FS6400-*-* . . . . . . . . 942 FS6402-*-* . . . . . . . . 946 FS6403-*-* . . . . . . . . 946 FS65000-*-* . . . . . . 1110 FS65005-*-* . . . . . . 1110 FS65007-*-* . . . . . . 1111 FS65008-*-* . . . . . . 1111 FS65009-*-* . . . . . . 1111 FS6502-*-* . . . . . . . . 947 FS6504-*-* . . . . . . . . 946 FS6600-*-*-FG . . . . . 948 FS6600-*FG . . . . . . 948 FS6602-*-FG . . . . . . 948 FS6803-*-NWOFG . 944 FS7002-*-* . . . . . . . 1014 FT1268 . . . . . 754, 1158 FT1356 754, 824, 1158 FT1356-2-1 . . 754, 824, 1158 FT1357 . . . . . . 754, 823 FT1380-115-5 . . . . . 753 FT1380-200-* . . . . . 753 FT1380-275-* . . . . . 753 FT1380-2-9 . . . . . . . 753 FVL101119018 . . . . 205 FVL104130102 . . . . 208 FVL104219001 . . . . 208 FVL104319004 . . . . 208 FVL12A270034 . . . . 317 FVL3XGIU532660 . . 208 FVL3XTAP532450 . . 208 FVL5V11104000 . . . 205 FVL5V11110000 . . . 208 FVL91110017 . . . . . 208
GC90006BA0A0R0-B . . 368 GH134-* . . . . . . . . . 743 GH194-6 . . . . . . . . . 701 GH194-8 . . . . . . . . . 701 GH195-* . . . . . . . . . 708 GH493-* . . . . . 709, 710 GH663-* . . . . . 701, 702 GH781-* . . . . . 705, 706 GH793-* . . . . . . . . . 707 GN-*PKZ . . . . . 960, 961 GP-* . . . . . . . . . . . . 1036 GREASE . . . . . . . . 1251 GREEN-C-ST-* 750, 751 GS20S . . . . . . . . . . . 391 GS-3D . . . . . . . . . . 1232 GS-6D . . . . . . . . . . 1232 GV-10 . . 344, 345, 347 GV-5 . . . 344, 345, 347
H
H16* . . . . . . . . . . . . 875 H160* . . . . . . . . . . . 875 H198204RD-600R . . 718 H198206RD-600R . . 718 H198208RD-600R . . 718 H198212RD-250 . . . 718 H198212RD-600R . . 718 H198216RD-400R . . 718 H20104BK-250R . . . 720 H20104BU-250R . . . 720 H20106BK-250R . . . 720 H20106BU-250R . . . 720 H20106RD-250R . . . 720 H20108BK-250R . . . 720 H20108BU-250R . . . 720 H20108RD-250R . . . 720 H20110BK-250R . . . 720 H20110BU-250R . . . 720 H20112BK-250R . . . 720 H26504BU-125R . . . 717 H26504BU-600R . . . 717 H26506BU-600R . . . 717 H26506BU-75R . . . . 717 H26508BU-500R . . . 717 H26510BU-500R . . . 717 H26512BU-500R . . . 717 H26516BU-200R . . . 717 H26520BU-100 . . . . 717 H26524BU-100 . . . . 717 H285* . . . . . . . . . . . 875 H80220-*-* . . . . . . . . 829 H80250-*-* . . . . . . . . 829 HBR Bend Restrictor 757 HC-* . . . . . . . . . . . . 1024 HC-9206 . . . . . . . . . 403 HC-9210* . . . . . . . . . 403 HE-* . . . . . . . . . . . . . 852 HF2P* . . . . . . . . . . . 356 HF4RT* . . . . . . . . . . 354 HH200ES . . . . . . . 1200 HI* . . . . . . . . . . 351, 358 HL-K272-3582 . . . . 1206
HN-* . . . . . . . . . . . 1023 HN-*Z . . . . . . . . . . . 959 HOS280 . . . . . . . . 1235 HP* . . . . . . . . . . . . . 358 HP-* . . . . . . . . . . . . 1023 HP*-B . . . . . . . . . . . 758 HP35S . . . . . . . . . . . 430 HRU15-1.18-15 . . . 1179 HS1181-* . . . . . . . . . 666 HS1184-* . . . . . . . . . 666 HS1186-* . . . . . . . . . 666 HS2000 . . . . . . . . . . 410 HS22* . . . . . . . . . . . 350 HS-3 . . . . . . . . . . . 1234 HS3000 . . . . . . . . . . 410 HS-50 . . . . . . . . . . 1224 HSCGLV-* . . . . . . . 1231 HSR-* . . . . . . . . . . . 758 HSS* . . . . . . . . . . . . 855 HT4OF6 . . . . . . . . 1077 HY-A2688 . . . . . . . 1206
ISSD*UE . . . . . . . . . .898 ISSD*UT . . . . . . . . . .898
J
J*-*-*TTM . . . . . . . .1029 J*-*BC . . . . . . . . . . .1027 J*-*C . . . . . . 1027, 1028 J*-*FC . . . . . . . . . . .1028 J*-*FE . . . . . . . . . . .1028 J*-*GC . . . . . . . . . . .1033 J*-*GE . . . . . . . . . . .1033 J*-*ME . . . . . . . . . . .1028 J*-*ME-45 . . . . . . . .1028 J*-*TER . . . . . . . . . .1030 J*BU . . . . . . . . . . . .1030 J*C . . . . . . . . . . . . .1027 J*E . . . . . . . . . . . . .1031 J*FC . . . . . . . . . . . .1028 J*FE . . . . . . . . . . . .1028 J*GC . . . . . . . . . . . .1033 J*GE . . . . . . . . . . . .1033 J*GE-45 . . . . . . . . .1033 J*ME . . . . . . . . . . . .1028 J*ME-45 . . . . . . . . .1028 J*N . . . . . . . . . . . . . .894 J*P . . . . . . . . . . . . .1036 J*S . . . . . . . . . . . . . .894 J*SBT . . . . . . . . . . .1031 J*SE . . . . . . . . . . . .1031 J*SE-45 . . . . . . . . . .1030 J*SRT . . . . . . . . . . .1032 J*T . . . . . . . . . . . . . .1031 J*TMT . . . . . . . . . . .1029 J*TTM . . . . . . . . . . .1029 J*U . . . . . . . . . . . . .1030 J*Z . . . . . . . . . . . . . .1036 JB* . . . . . . . . . . . . .1008 JB*-90 . . . . . . . . . . .1009 JB*-90K . . . . . . . . . .1019 JB*-K . . . . . . . . . . . .1019 JG150X100 . . . . . . . .726 JG200X100 . . . . . . . .726 JG300X100 . . . . . . . .726 JG400X100 . . . . . . . .726 JG600X100 . . . . . . . .726 JM* . . . . . . . . . . . . .1004 JM*-90 . . . . . . . . . . .1004 JM315 . . . . . . . . . . . .427 JM420 . . . . . . . . . . . .427 JN-*Z . . . . . . . . . . . . .960 JS*C . . . . . . . . . . . .1027 JS201 . . . . . . . . . . . .864 JS202 . . . . . . . . . . . .864 JS203 . . . . . . . . . . . .864 JS205 . . . . . . . . . . . .864 JS206 . . . . . . . . . . . .864 JS207 . . . . . . . . . . . .864 JS208 . . . . . . . . . . . .864 JS209 . . . . . . . . . . . .864 JS212 . . . . . . . . . . . .864 JS213 . . . . . . . . . . . .864 JS215 . . . . . . . . . . . .864 JS240 . . . . . . . . . . . .864
I
IBD*CP . . . . . . . . . . IBD*FS . . . . . . . . . . IBD*P . . . . . . . . . . . IBD*U . . . . . . . . . . . IBD*UT . . . . . . . . . . IN118-* . . . . . . . . . . INB100-* . . . . . . . . . INB103-* . . . . . . . . . INB106-* . . . . . . . . . INB107-* . . . . . . . . . INB109-* . . . . . . . . . INB110-* . . . . . . . . . INB116-* . . . . . . . . . INB121-* . . . . . . . . . INB131-* . . . . . . . . . IPS10B . . . . . . . . . . IPS10M . . . . . . . . . . IPS17H . . . . . . . . . . IPS3017 . . . . . . . . . IPS30H . . . . . . . . . . ISSD*ANA* . . . . . . . ISSD*ANU* . . . . . . . ISSD*BF . . . . . . . . . ISSD*BMC* . . . . . . . ISSD*BU . . . . . . . . . ISSD*CP . . . . . . . . . ISSD*FC* . . . . . . . . ISSD*FE* . . . . . . . . ISSD*FF . . . . . . . . . ISSD*FS . . . . . . . . . ISSD*MBT* . . . . . . . ISSD*MC* . . . . . . . . ISSD*MCST* . . . . . . ISSD*ME* . . . . . . . . ISSD*MEST* . . . . . . ISSD*MRT* . . . . . . . ISSD*N . . . . . . . . . . ISSD*P . . . . . . . . . . ISSD*RU* . . . . . . . . ISSD*U . . . . . . . . . . 912 900 912 912 912 921 919 919 919 920 920 920 921 921 921 434 434 436 437 436 899 899 900 911 897 899 896 896 900 900 898 895 896 896 897 898 900 899 897 897
G
G-14 . . . . . . . . . . . . 1095 G1615-05-A-1 . . . . . 383 G-17 . . . . . . . . . . . . 1095 G-2 . . . . . . . . . . . . . 1095 G-22 . . . . . . . . . . . . 1095 G-23 . . . . . . . . . . . . 1095 G-27 . . . . . . . . . . . . 1095 G-30 . . . . . . . . . . . . 1095 G-5 . . . . . . . . . . . . . 1095 G-8 . . . . . . . . . . . . . 1095 G-9 . . . . . . . . . . . . . 1095 GA-2 . . . . . . . . . . . . 405 GA24048-*-* . . . . . . 822
1307
Model Number Index

Model Number Page Model Number Page Model Number Page Model Number Page Model Number Page JS242 . . . . . . . . . . . . 864 JS252 . . . . . . . . . . . . 864 JS309 . . . . . . . . . . . . 864 JS310 . . . . . . . . . . . . 864 JS312 . . . . . . . . . . . . 864 JS314 . . . . . . . . . . . . 864 JS315 . . . . . . . . . . . . 864 JS317 . . . . . . . . . . . . 864 JT* . . . . . . . . . . . . . 1005 MCU-*-G . . . . . . . . 1183 MDP104 . . . . . . . . . . 384 ME-* . . . . . . . . . . . . . 853 MET/INCH-SPLICE- 1204 METRIC-O-KIT-E . 1204 METRIC-O-KIT-J . . 1203 MF-* . . . . . . . . . . . . 1025 MF-*-45 . . . . . . . . . 1024 MF-30-1-4A . . . . . . . 396 MF-30-1-4B . . . . . . . 396 MF-60-1-4A . . . . . . . 396 MHC-* . . . . . . . . . . . 845 MISC-422-WMN . . 1229 MM-* . . . . . . . . . . . 1024 MPV1-10-* . . . . . . . . 202 MRTU-* . . . . . . . . . 1201 MSH-5-RL . . . . . . . . 737 MSH-6-RL . . . . . . . . 737 MSP4PAK . . . . . . . 1236 NP28-268F . . . . . . 1041 NP28-269F . . . . . . 1041 NP32-028 . . . . . . . . 839 NP401-* . . . . . . . . . . 833 NP411-* . . . . . . . . . . 833 NP44-165 . . . . . . . . 928 NP44-205 . . . . . . . . 928 NP4739-* . . . . . . . . . 834 NP4797-* . . . . . . . . . 834 NPACR10-162F . . 1051 NPACR-10-255 . . . 1045 NPACR-10-256 . . . 1045 NPACR-10-263 . . . 1045 NPACR-10-264 . . . 1045 NPACR-10-268 . . . 1045 NPACR-10-273 . . . 1045 NSBT-8 . . . . . . . . . 1228 NV1-10-* . . . . . . . . . 297 PB*-K . . . . . . . . . . 1018 PC3-2-0.20 . . . . . . . 281 PC37C . . . . . . . . . . . 183 PC-50C . . . . . . . . . . 183 PD-* . . . . . . . . . . . . 1095 PD02P-*-* . . . . . . . . 126 PD688 . . . . . . . . . . . 430 PE-* . . . . . . . . . . . . . 872 PE172 . . . . . . . . . . . 416 PE172-50-220 . . . . . 416 PE174-50-220 . . . . . 416 PE464-50-220 . . . . . 417 PE552-50-220 . . . . . 418 PE554 . . . . . . . . . . . 418 PE554-50-220 . . . . . 418 PE554PT . . . . . . . . . 418 PE554S-50-220 . . . . 418 PE55TWP . . . . . . . . 430 PE604PT . . . . . . . . . 420 PE604PT-220 . . . . . 420 PEEL-PRESS-UNIT* . . . 1238 PEK10C . . . . . 106, 147 PEK15C . . . . . 106, 147 PEK20C . . . . . 107, 147 PEL17C . . . . . . 107, 147 PEL20C . . . . . . 107, 147 PEL22C . . . . . . 107, 147 PEL25C . . . . . . 107, 147 PFR2-10-* . . . . . . . . 285 PG-*SW . . . . . . . . . 1207 PH113C . . . . . . . . . . 435 PH63C . . . . . . . . . . . 435 PH83C . . . . . . . . . . . 435 PM* . . . . . . . . . . . . 1006 PME55S-50-220 . . . 427 PPA200 . . . . . . . . . . 850 PPB200 . . . . . . . . . . 850 PPD200 . . . . . . . . . . 851 PRV1-10-* . . . . . . . . 300 PRV2-10-* . . . . . . . . 301 PS1400-* . . . . . . . . 1186 PS1600-* . . . . . . . . 1187 PS1800-* . . . . . . . . 1188 PS1850-* . . . . . . . . 1189 PS2700-* . . . . . . . . 1189 PS-3000 . . . . . . . . . 398 PS-400-* . . . . . . . . . 400 PSC-218 . . . . . . . . 1190 PSC-218-WB . . . . . 1190 PSC-326 . . . . . . . . 1190 PSC-326-WB . . . . . 1190 PSC-330 . . . . . . . . 1190 PSC-334 . . . . . . . . 1190 PSC-334-WB . . . . . 1190 PSC-338 . . . . . . . . 1190 PSC-342 . . . . . . . . 1190 PSC-342-WB . . . . . 1190 PSC-350 . . . . . . . . 1190 PSC-433-WB . . . . . 1190 PSQ-* . . . . . . . . . . 1191 PT-45-4 . . . . . . . . . . 827 PT-90-4 . . . . . . . . . . 828 PTR-* . . . . . . . . . . .1023 PT-S-4 . . . . . . . . . . . .827 PVE* . . . . . . . . . . . . .109 PVQ* . . . . . . . . . . . . .110 PVR1-10-* . . . . . . . . .284
Q
Q-1 . . . . . . . . . . . . .1096 Q-3 . . . . . . . . . . . . .1096 Q-4 . . . . . . . . . . . . .1096 Q-5 . . . . . . . . . . . . .1096 Q-6 . . . . . . . . . . . . .1096 QM102 . . . . . . . . . .1064 QM103 . . . . . . . . . .1064 QM83 . . . . . . . . . . .1064 QR-* . . . . . . . . . . . .1185 QUAD-KIT . . . . . . . .1202
K
KDG4V-3* . . . . . . . . 213 KDG4V-3-* . . . . . . . . 214 KDG4V-3S-* . . 212, 213 KR-25002 . . . . . . . . 1185 KW-* . . . . . . . . . . . 1184
L
L01* . . . . . . . . . . . . . 644 L14* . . . . . . . . . . . . . 664 L22* . . . . . . . . . . . . . 664 L22B* . . . . . . . . . . . . 647 L22L* . . . . . . . . . . . . 641 L32* . . . . . . . . . . . . . 664 L36121-100 . . . . . . . 660 L36331-100 . . . . . . . 660 L36341-100 . . . . . . . 660 LS755T4JRSHA . . . 210 LSP151-05-02 . . . . . 384 LSP51-* . . . . . . . . . . 384 LX-1152 . . . . . . . . . 1249 LX-1203 . . . . . . . . . 1251 LX-1300 . . . . . . . . . 1256 LX-1330 . . . . . . . . . 1257 LX-1336 . . . . . . . . . 1257 LX-1600 . . . . . . . . . 1258 LX-1604 . . . . . . . . . 1258 LX-1608 . . . . . . . . . 1258 LX-1614 . . . . . . . . . 1258 LX-1628 . . . . . . . . . 1258 LX-1632 . . . . . . . . . 1258 LX-1710 . . . . . . . . . 1258
N
N14-12B . . . . . . . . . 667 N1512 . . . . . . . . . . . 296 N1513 . . . . . . . . . . . 296 N1514 . . . . . . . . . . . 296 N20B . . . . . . . . . . . . 294 N25B . . . . . . . . . . . . 294 N5002-A1 . . . . . . . . 220 N5060-P/2000/5 . . . 220 N51055-22/2000/5 . . 230 N52250-1 . . . . . . . . . 220 N6105-A . . . . . . . . . 230 N716-19-20J . . . . . 1234 NB300-*Z . . . . . . . . . 878 NBFG-2013-SP . . . . 375 NC-4-316 . . . . . . . . . 828 ND* . . . . . . . . . . . . . 644 NH1600* . . . . . . . . . 937 NH1602* . . . . . . . . . 938 NHS-* . . . . . . . . . . . 757 NJ-4-316 . . . . . . . . . 827 NJIC-4-S . . . . . . . . . 827 NK1000023-200 . . . 938 NK1000023-400 . . . 938 NK1000061C350 . . . 938 NK1000063C200 . . . 938 NK1000063C300 . . . 938 NK1000063C400 . . . 938 NM2-4-S . . . . . . . . . 827 NP10-161F . . . . . . 1051 NP10-269 . . . . . . . 1045 NP10-276 . . . . . . . 1045 NP10-286F . . . . . . 1047 NP10-294F . . . . . . 1047 NP10-295F . . . . . . 1047 NP10-299F . . . . . . 1047 NP10-457F . . . . . . 1046 NP28-104 . . . . . . . 1037 NP28-107 . . . . . . . 1037 NP28-166 . . . . . . . 1041 NP28-201 . . . . . . . 1038 NP28-202 . . . . . . . 1038 NP28-204 . . . . . . . 1038
O
O . . . . . . . . . . . . . . . 355 OFRS-25-* . . . . . . . . 348 OFRS-60-* . . . . . . . . 349 OR-* . . . . . . . . . . . 1096
R
R14* . . . . . . . . . . . . .663 R22* . . . . . . . . . . . . .663 R32* . . . . . . . . . . . . .663 R37111-100 . . . . . . .658 R37121-100 . . . . . . .658 R37221-100 . . . . . . .658 R37331-100 . . . . . . .658 R37331-600 . . . . . . .658 R37341-100 . . . . . . .658 R37341-600 . . . . . . .658 R42* . . . . . . . . . . . . .663 RA-* . . . . . . . . . . . .1024 RC12BB . . . . . . . . . .200 RD10013 . . . . . . . . . .410 RD256 . . . . . . . . . . . .410 RD556 . . . . . . . . . . . .410 RH102 . . . . . . . . . . . .409 RH121 . . . . . . . . . . . .409 RH123 . . . . . . . . . . . .409 RH202 . . . . . . . . . . . .409 RH203 . . . . . . . . . . . .409 RH302 . . . . . . . . . . . .409 RH306 . . . . . . . . . . . .409 RH603 . . . . . . . . . . . .409 RHS* . . . . . . . . . . . . .131 RHS-* . . . . . . . . . . . .131 RIF* . . . . . . . . . 351, 352 RIF48* . . . . . . . . . . . .351 RK20L-112 . . . . . . . .158 RK25L-112 . . . . . . . .158 RK25L-125 . . . . . . . .158 RK30L-125 . . . . . . . .158 RK30L-150 . . . . . . . .158 RK35L-125 . . . . . . . .158 RK35L-150 . . . . . . . .159 RK40L-125 . . . . . . . .159 RK40L-150 . . . . . . . .159 RL-50 . . . . . . . . . . . .302 RL-75 . . . . . . . . . . . .302 RLS100 . . . . . . . . . . .407 RLS1000S . . . . . . . . .408 RLS1500S . . . . . . . . .408 RLS200 . . . . . . . . . . .407
Fluid Conveying
P
P-077002 . . . . . . . . . 380 P-11 . . . . . . . . . . . . 1096 P12 . . . . . . . . . . . . . 412 P159 . . . . . . . . . . . . 414 P159D . . . . . . . . . . . 414 P-17 . . . . . . . . . . . . 1096 P19 . . . . . . . . . . . . . 413 P19L . . . . . . . . . . . . 413 P-23 . . . . . . . . . . . . 1096 P23 . . . . . . . . . . . . . 392 P257A367SPLZA15-6 . . 108 P27 . . . . . . . . . . . . . 392 P28 . . . . . . . . . . . . . 652 p300 . . . . . . . . . . . . 414 P300D . . . . . . . . . . . 414 P-31 . . . . . . . . . . . . 1096 P39124-100 . . . . . . . 659 P39124-600 . . . . . . . 659 P39224-600 . . . . . . . 659 P39344-600 . . . . . . . 659 p460 . . . . . . . . . . . . 414 P460D . . . . . . . . . . . 414 P5000C531ADXK2514 . 108 P5151A224AAXQ22-54 108 P5151A231AAZA25- 108 P-53 . . . . . . . . . . . . 1096 P55 . . . . . . . . . . . . . 412 P59 . . . . . . . . . . . . . 413 P59L . . . . . . . . . . . . 413 P-68 . . . . . . . . . . . . 1096 P-8 . . . . . . . . . . . . . 1096 PA6 . . . . . . . . . . . . . 415 PB* . . . . . . . . . . . . 1011
M
M056522A . . . . . . . . 382 M-15-S . . . . . . . . . . . 394 M182582A . . . . . . . . 382 M182682A . . . . . . . . 382 M-20 . . . . . . . . . . . . . 394 M212SS-000-N . . . . 647 M214SS-000-N . . . . 647 M-30 . . . . . . . . . . . . . 394 M3000C783LDZA05-24 . 148 M43 . . . . . . . . . . . . . 631 M44 . . . . . . . . . . . . . 631 MAH-* . . . . . . . . . . . 855 MBR110 . . . . . . . . . . 377 MBR120 . . . . . . . . . . 377 MCN-* . . . . . . . . . . 1183 MCSC* . . . . . . . . . . . 332 MCU-*-D . . . . . . . . 1184
1308
Model Number Index

RLS300 . . . . . . . . . . 407 RLS50 . . . . . . . . . . . 407 RLS500S . . . . . . . . . 407 RSS1002 . . . . . . . . . 408 RSS101 . . . . . . . . . . 408 RSS202 . . . . . . . . . . 408 RSS302 . . . . . . . . . . 408 RSS502 . . . . . . . . . . 408 RST-* . . . . . . . . . . . . 845 RTE* . . . . . . . . 351, 352 RTE47G10B . . . . . . 352 RTF* . . . 351, 352, 353 rtf* . . . . . . . . . . . . . . 352 RTF40* . . . . . . . . . . 352 RTF48N25D10BS1V 352 RTF48S25D10BS1N 352 RV1-10-* . . . . . . . . . 304 RV127S . . . . . . . . . . 176 RV167S . . . . . . . . . . 176 RV207S . . . . . . . . . . 176 RV2-10-* . . . . . . . . . 307 RV21278 . . . . . . . . . 425 RV21278-15 . . . . . . . 425 RV21278-25 . . . . . . . 425 RV3-10-* . . . . . 199, 305 RV3-16-* . . . . . . . . . 306 RV5-10-* . . . . . 284, 308 RV5-16-* . . . . . . . . . 309 RX*BMG . . . . . . . . 1149
S
S-10TW . . . . . . . . . . 745 S-12TW . . . . . . . . . . 745 S-16TW . . . . . . . . . . 745 S-4TW . . . . . . . . . . . 745 S569-* . . . . . . . . . . 1224 S592-* . . . . . . . . . . 1223 S-5TW . . . . . . . . . . . 745 S-6TW . . . . . . . . . . . 745 S-8TW . . . . . . . . . . . 745 SAE85W-140 . . . . . 1244 SAF* . . . . . . . . 343, 344 saf* . . . . . . . . . . . . . . 343 SAF07154/SF6520 . 343 SB* . . . . . . . . . . . . . . 357 SB125-100 . . . . . . . . 159 SBV11-10-C-* . . . . . 242 SBV11-10-O-* . . . . . 248 SC-4 . . . . . . . . . . . . . 746 SCH-603H . . . . . . . . 403 SD20-P4B4-* . . . . . . 632 SD4BALA4 . . . . . . . . 315 SD51PKG328LAESAE . 206 SD5BUBA7 . . . . . . . 316 SDBC-* . . . . . . . . . . 866 SDC-F1 . . . . . . . . . . 211 SDCF755* . . . . . . . . 211 SDC-S . . . . . . . . . . . 211 SE* . . . . . . . . . . . . . . 357 SF* . . . . . 345, 347, 357 sf* . . . . . . . . . . . . . . . 357 SF10-* . . . . . . . . . . . 724
SF-6510 . . . . . . . . . . 344 SF-6520 . . . . . . . . . . 343 SF-6710 . . . . . . 345, 347 SF-6720 . . . . . . 345, 347 SF6790 . . . . . . 345, 347 SH* . . . . . . . . . . . . . 357 SHV25 . . . . . . . . . . . 325 SI2-5DW3 . . . . . . . 1109 SJ2010DA . . . . . . . . 426 SK-20420 . . . . . . . . 1230 SK-2043-C . . . . . . . 1230 SK2-10-2 199, 238, 245, . . . . . . . . . . . . . 283, 297 SK2-8-3 . . . . . . . . . . 326 SKK12-1/8-NPT-VD . 402 SKO362 . . . . . . 103, 146 SL1712 . . . . . . . . . 1248 SL3120 . . . . . . . . . 1248 SL35901 . . . . . . . . 1247 SL35911 . . . . . . . . 1247 SLW-08 . . . . . . . . . . 384 SM1-8 . . . . . . . . . . 1105 SM2127PPDPAS-BAG . 1104 SM2137PPDPAS-BAG . 1104 SM2160PPDPAS-BAG . 1104 SM3190PPDPAS-BAG . 1104 SM3200PPDPAS-BAG . 1104 SM3213PPDPAS-BAG . 1104 SM3222PPDPAS-BAG . 1104 SM3254PPDPAS-BAG . 1104 SM4266PPDPAS-BAG . 1104 SM4280PPDPAS-BAG . 1104 SM5320PPDPAS-BAG . 1104 SM5334PPDPAS-BAG . 1104 SMB20-C1 . . . . . . . . 402 SMBB-* . . . . . . . . . . 376 SMBT-* . . . . . . . . . . 375 SMD20-1/4NPT . . . . 402 SMK-20-1/4NPT-VD 402 SMK20-1/4NPT-VD . 402 SMK20-7/16UNF-VE 402 SMK20-9/16UNF-VE 402 SMK20-G1/4-VB . . . 402 SMS20/U1/4-1000M 402 SMS20/U1/4-3000M 402 SNA127BS0U . . . . . 383 SNA127BST12 . . . . 383 SNA127BST1U . . . . 383 SNA254BS0U . . . . . 383 SNA254BSTU . . . . . 383 SP1064PPDPAS-BAG .
1102 SP1095PPDPAS-BAG . 1102 SP1100PPDPAS-BAG . 1102 SP1120PPDPAS-BAG . 1102 SP2095/095DPPGDASBAG/TAG . . . . . . . 1108 SP2127PPDPAS-BAG . 1102 SP215/15PPHGDASM . 1108 SP215PPHDPASMW10 1102 SP2160/160DPPGDA . . 1108 SP2160PPDPAS-BAG . 1102 SP2171PPDPAS-BAG . 1102 SP2180PPDPAS-BAG . 1102 SP3134/134DPPHGDASBAG/TAG . . . . . . . 1108 SP3174/174DPPHGDASBAG/TAG . . . . . . . 1108 SP3174PPHDPAS-BAG/ TAG . . . . . . . . . . . . 1102 SP319/ 19PPHGDASMW10 1108 SP3190/190DPPGDAS . 1108 SP3190PPDPAS-BAG . 1102 SP319PPHDPASMW10 1103 SP3200PPDPAS-BAG . 1103 SP3205/205DPPHGDASBAG/TAG . . . . . . . 1108 SP3205PPHDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP3213/213DPPGDASBAG/TAG . . . . . . . 1108 SP3213PPASE-BAG/TAG . . . . . . . . . . . . . . . . 1104 SP3213PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP3222/222DPPGDASBAG/TAG . . . . . . . 1108 SP3222PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP3222PPHDPAS 1103 SP3254PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP4266PPASE-BAG/TAG . . . . . . . . . . . . . . . . 1104 SP4266PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP4269PPHDPASMW10 1103 SP4280/280DPPHGD-
AS-K BAG/tAG . . . 1109 SP428PPHDPASMW10 1103 SP5278/278DPPHGDASBAG/TAG . . . . . . . 1108 SP5278PPHDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP530PPHDPASMW10 1103 SP5320PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP5334PPASE-BAG/TAG . . . . . . . . . . . . . . . . 1104 SP5334PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP5350PPHASE-BAG/ TAG . . . . . . . . . . . . 1104 SP5357/357DPPHGDASBAG/TAG . . . . . . . 1109 SP5370PPHDPAS-K . . . 1103 SP5381PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP5381PPHASE-BAG/ TAG . . . . . . . . . . . . 1104 SP538PPHDPASMW10 1103 SP5422PPASE-BAG/TAG . . . . . . . . . . . . . . . . 1104 SP5422PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SP6445PPHDPAS-K . . . 1103 SP6483PPASE-BAG/TAG . . . . . . . . . . . . . . . . 1104 SP7572PPHDPASMW10 1103 SP7635PPDPAS-BAG/ TAG . . . . . . . . . . . . 1103 SPAL3137SPPHDPAL . 1106 SPAL4022PPHDPALASM W15 . . . . . . . . . . . . 1106 SPAL4213SPPDPALASBAG/TAG . . . . . . . 1106 SPAL4267SPPDPALASBAG/TAG . . . . . . . 1106 SPAL5334SPPDPALASBAG/TAG . . . . . . . 1106 SPAL5422SPPDPALASBAG/TAG . . . . . . . 1106 SPAL60445PPHDPALAS MW1 . . . . . . . . . . . 1106 SPAL6483SPPDPALASBAG/TAG . . . . . . . 1106 SPAL6603SPPDPALASBAG/TAG . . . . . . . 1106 SPAL7889SPPDPALASBAG/TAG . . . . . . . 1107 SPC1-10-* . . . . . . . . 182 SPC1-16-* . . . . . . . . 184 SPC2-10-* . . . . . . . . 181 SPDS2127/127PPGDAS-
BAG/TAG . . . . . . . .1108 SPDS2171/171PPGDBAG/TAG . . . . . . . .1108 SPDS3222/222PPGDBAG/TAG . . . . . . . .1108 SPDS4266/266PPGDBAG/TAG . . . . . . . .1108 SPG-063-10000-5 . . .389 SPG63RB-BLACK . .391 SPHM* . . . . . . . . . . .844 SPR-4002 . . . . . . . .1181 SPR-6004 . . . . . . . .1181 SPR-7002 . . . . . . . .1181 SPX-*U . . . . . . . . . .1092 SS9002-*-* . . . . . . .1035 SS9059-*-* . . . . . . .1035 SS9200-*-* . . . . . . .1034 SS9201L-* . . . . . . . . .901 SS9201S-* . . . . . . . .901 SS9202-* . . . . . . . . . .901 SS9240-*-* . . . . . . .1035 SSF* 344, 345, 346, 347 ST-* . . . . . . . . 843, 1184 ST2F2-S . . . . . . . . .1235 ST3F3-S . . . . . . . . .1235 ST3M3-S . . . . . . . . .1236 ST4F4-S . . . . . . . . .1235 STC-* . . . . . . . . . . . .843 STC5 . . . . . . . . . . . . .843 STFC-01-GLASS . . .360 STFC6 . . . . . . . . . . .1235 STN* . . . . . . . . . . . . .843 SUNRISE-AIR-* . . . .719 Super Vac . . . . . . . . .723 SV1-10-3-* . . . . . . . .255 SV1-10-4-* . . . . . . . .256 SV1-10-C-* . . . . . . . .241 SV1-16-C-* . . . . . . . .243 SV125 . . . . . . . . . . . .668 SV150 . . . . . . . . . . . .668 SV175 . . . . . . . . . . . .668 SV1-8-3-* . . . . . . . . .252 SV2-20-* . . . . . . . . . .244 SV3-10-* . . . . . . . . . .247 SV3-10-C-* . . . . . . . .240 SV3-12-* . . . . . . . . . .249 SV3-16-* . . . . . . . . . .250 SV3-20-* . . . . . . . . . .251 SV4-10-3-* . . . . . . . .254 SV4-10-C-* . . . . . . . .238 SV4-10-O-* . . . . . . . .245 SV4-8-* . . . . . . . . . . .253 SV5-8-C-* . . . . . . . . .239 SV5-8-O-* . . . . . . . . .246 SV9-10* . . . . . . . . . . .259 SV9-8-* . . . . . . . . . . .258
T
T-10 . . . . . . . . . . . . .1095 T-12 . . . . . . . . . . . . .1095 T242-* . . . . . . . . . . .1226 T262-* . . . . . . . . . . .1226 T-3 . . . . . . . . . . . . . .1095
1309
Model Number Index

Model Number Page Model Number Page Model Number Page Model Number Page Model Number Page T-4 . . . . . . . . . . . . . 1095 T-5 . . . . . . . . . . . . . 1095 T-6 . . . . . . . . . . . . . 1095 T-7 . . . . . . . . . . . . . 1095 T70-50 . . . . . . . . . . 1226 T-8 . . . . . . . . . . . . . 1095 T-9 . . . . . . . . 1095, 1228 TBC* . . . . . . . . . . . . 859 TC-101-05-E . . . . . 1231 TEF* . . . . . . . . . . . . . 355 TEF210* . . . . . . . . . . 355 TEF320* . . . . . . . . . . 355 TEFLONTAPE . . . . 1225 TFCS40-* . . . . . . . . 1156 TFS-*-*-* . . . . . . . . . 342 THH*SS . . . . . . . . . . 730 TMF* . . . . . . . . . . . . 342 TMF-25-5 . . . . . . . . . 342 TMF-50-0 . . . . . . . . . 342 TP-* . . . . . . . . . . . . 1180 TP1600* . . . . . . . . . . 873 TPS-250 . . . . . . . . . 1223 TPS-50 . . . . . . . . . . 1223 TR-* . . . . . . . . . . . . 1181 TRL*45SS . . . . . . . . 731 TRL*90SS . . . . . . . . 731 TWH15 . . 421, 428, 429 TWH20 . . 421, 428, 429 TWH50 . . 421, 428, 429 TWLC4 . . . . . . . . . . . 429 TWLC8 . . . . . . . . . . . 429 TWSD3 . . . . . . . . . . 428 TWSD6 . . . . . . . . . . 428 U25-*-31B . . . . . . . 1178 U25-*-37B . . . . . . . 1178 U25-*-50D . . . . . . . 1178 U25-*-56B . . . . . . . 1178 U25-*-62B . . . . . . . 1178 U25-*-SQB . . . . . . . 1178 U25-0.75 . . . . . . . . 1178 U25-0.93 . . . . . . . . 1178 U25-1.12 . . . . . . . . 1178 U25-1.18 . . . . . . . . 1178 U25-1.37 . . . . . . . . 1178 U25-1.62 . . . . . . . . 1178 U25-1.75 . . . . . . . . 1178 U25-2.25 . . . . . . . . 1178 U25-3.00 . . . . . . . . 1178 U25-3.50 . . . . . . . . 1178 U25-3.75-37B . . . . 1178 U25-4.50 . . . . . . . . 1178 U25-5.00 . . . . . . . . 1178 U25-5.50 . . . . . . . . 1178 U31-*-37B . . . . . . . 1178 U31-*-50B . . . . . . . 1178 U31-*-SQB . . . . . . . 1178 U31-1.25 . . . . . . . . 1178 U31-1.50 . . . . . . . . 1178 U31-1.87 . . . . . . . . 1178 U31-2.00 . . . . . . . . 1178 U31-2.37 . . . . . . . . 1178 U31-2.50 . . . . . . . . 1178 U31-2.75 . . . . . . . . 1178 U31-2.87 . . . . . . . . 1178 U31-4.00 . . . . . . . . 1178 U31-4.37 . . . . . . . . 1178 U31-4.50 . . . . . . . . 1178 U37-*-50B . . . . . . . 1179 U37-*-50D . . . . . . . 1179 U37-*-62B . . . . . . . 1179 U37-*-SQB . . . . . . . 1179 U37-1.25 . . . . . . . . 1179 U37-1.75 . . . . . . . . 1179 U37-2.75 . . . . . . . . 1179 U37-3.50 . . . . . . . . 1179 U37-5.25 . . . . . . . . 1179 U50-*-SQB . . . . . . . 1179 U50-2.50 . . . . . . . . 1179 UC06 . . . . . . . . . . . 1093 UC07 . . . . . . . . . . . 1093 UC22 . . . . . . . . . . . 1093 UC26 . . . . . . . . . . . 1093 UC31-*-56B . . . . . . 1178 UC33 . . . . . . . . . . . 1093 UC36 . . . . . . . . . . . 1093 UC40 . . . . . . . . . . . 1093 UC50 . . . . . . . . . . . 1093 UC60 . . . . . . . . . . . 1093 UC70 . . . . . . . . . . . 1093 UM* . . . . . . . . . . . . . 359 V10F-* . . . . . . . . . . . . 88 V20-* . . . . . . . . . . . . . 90 V2010-* . . . . . . . . . . 116 V20F-*-* . . . . . . . . . . . 92 V304* . . . . . . . . . . . . 356 V405* . . . . . . . . . . . . 354 VFL200X300 . . . . . . 725 VFL300X300 . . . . . . 725 VFL600X300 . . . . . . 725 VJ-5-YS-190PSI . . . 312 VJ-7-XS . . . . . . . . . . 312 VMQ145* . . . . . . . . . 100 VMQ22525* . . . . . . . 117 VMQ23525* . . . . . . . 117 VMQ24525* . . . . . . . 117 VMQ24535* . . . . . . . 117 VP42-4COFLDV . . . 122 VP42-4COFLFC55 . 122 VS*X* . . . . . 1179, 1180 VS-187 . . . . . . . . . 1200 VS2BKLF2 . . . . . . . . 314 VS4BKLF6 . . . . . . . . 314 VS4BKLF9 . . . . . . . . 314 VTM42-* . . . . . . . . . 123 WAL374* . . . . . . . . . 888 WAL609* . . . . . . . . . 891 WAL612* . . . . . . . . . 892 WM521A1 . . . . . . . . 669 WM775B . . . . . . . . . 670 WST-* . . . . . . . . . . 1200 WT-* . . . . . . . . . . . 1233
X
X011411100 . . . . . . 232 XD-3 . . . . . . . . . . . 1245 XGIU641250 . . . . . . 232 XP-* . . . . . . . . . . . . 1096 XTAP623282 . 205, 206, 215
Y
Y-1 . . . . . . . . . . . . . 1095 Y-1/2 . . . . . . . . . . . 1095 Y-1/4 . . . . . . . . . . . 1095 Y-1/8 . . . . . . . . . . . 1095 Y-1-1/2 . . . . . . . . . 1095 Y-1-1/4 . . . . . . . . . 1095 Y-2 . . . . . . . . . . . . . 1095 Y-3/4 . . . . . . . . . . . 1095 Y-3/8 . . . . . . . . . . . 1095 Y325-126 . . . . . . . . . 127
W
W021* . . . . . . . 349, 350 W14630 . . . . . . . . . 1114 W168-*-* . . . . . . . . 1088 W28472 . . . . . . . . . 1113 W28473 . . . . . . . . . 1113 W28539 . . . . . . . . . 1113 W28554 . . . . . . . . . 1113 W28555 . . . . . . . . . 1113 W28559 . . . . . . . . . 1113 W29-* . . . . . . . . . . 1089 W30-* . . . . . . . . . . 1089 W300-* . . . . . . . . . 1088 W4-*-*U . . . . . . . . . 1085 W43-*-*U . . . . . . . . 1085 W59-*-*U . . . . . . . . 1087 W60-*-* . . . . . . . . . 1087 W61-*-* . . . . . . . . . 1086 W7-*-* . . . . . . . . . . 1090 W72-*-*U . . . . . . . . 1086 W75150 . . . . . . . . . 1114 W78850 . . . . . . . . . 1114 W86471 . . . . . . . . . 1113 W86472 . . . . . . . . . 1113 W86473 . . . . . . . . . 1113 W86550 . . . . . . . . . 1113 W86554 . . . . . . . . . 1113 W86555 . . . . . . . . . 1113 W86559 . . . . . . . . . 1113 WAL024* . . . . . . . . . 891 WAL028* . . . . . . . . 1007 WAL037* . . . . . . . . . 889 WAL0376* . . . . . . . . 890 WAL039* . . . . . . . . . 886 WAL0638* . . . . . . . . 888 WAL37* . . . . . . . . . . 891 WAL372* . . . . . . . . . 886 WAL373* . . . . . . . . . 888
Fluid Conveying
U
U090 . . . . . . . . . . . . 381 U100 . . . . . . . . . . . . 381 U110 . . . . . . . . . . . . 381 U12-*-18B . . . . . . . 1177 U12-*-25B . . . . . . . 1177 U12-*-31B . . . . . . . 1177 U12-*-SQB . . . . . . . 1177 U12-0.37 . . . . . . . . 1177 U12-0.56 . . . . . . . . 1177 U12-0.68 . . . . . . . . 1177 U12-0.81 . . . . . . . . 1177 U12-2.00 . . . . . . . . 1177 U12-2.25 . . . . . . . . 1177 U12-2.37 . . . . . . . . 1177 U12-2.50 . . . . . . . . 1177 U12-2.75 . . . . . . . . 1177 U15-1.18 . . . . . . . . 1177 U15-1.25 . . . . . . . . 1177 U15-1.37 . . . . . . . . 1177 U18-*-25B . . 1177, 1178 U18-*-31B . . 1177, 1178 U18-*-37B . . 1177, 1178 U18-*-SQB . . 1177, 1178 U18-0.50 . . . . . . . . 1177 U18-1.18 . . . . . . . . 1177 U18-1.62 . . . . . . . . 1177 U18-2.87 . . . . . . . . 1178 U18-3.00 . . . . . . . . 1178
V
V0191B1R03 . . . . . . 348 V0191B1R05 . . . . . . 348 V021* . . . . . . . . 349, 350 V10-* . . . . . . . . . . . . . 86
1310
Catalog Part Number Index

Part No. Page Part No. Page C1AB62 C1AB64 93 C1AB92 C1AB97 C1AB99 C1AC11 C1AC12 C1AC13 C1AC23 C1AC31 C1AC32 C1AC35 C1AC36 C1AC37 C1AC38 C1AC41 C1AC42 C1AC43 C1AC44 C1AC46 C1AC47 C1AC48 C1AC49 C1AC51 C1AC56 C1AC70 C1AC75 93 C1AC76 93 C1AC77 93 C1AC78 93 C1AC79 93 C1AC82 C1AC90 C1AC93 C1AC94 C1AC95 C1AC96 C1AC97 C1AC98 C1AD14 C1AD15 C1AD16 C1AD17 C1AD18 C1AD19 C1AD20 C1AD22 C1AD24 308 C1AD25 313 C1AD31 C1AD32 C1AD35 C1AD36 C1AD37 C1AD39 . . 162 . . 91, . . . 87 . . . 91 . . 265 . 265 . 265 . 265 . . 94 . 261 . 263 . 262 . 262 . 261 . 263 . 262 . 261 . 262 . 263 . 261 . 263 . 262 . 261 . 263 . 268 . 203 . 91, . 91, . 91, . 91, . 91, . 264 . . 92 . 262 . 262 . 262 . 262 . 262 . 262 . 212 . 213 . 330 . 246 . 193 . 194 . 329 . 329 284, 193, . 332 . 332 . 332 . 332 . 332 . 260 Part No. Page C1AD42 C1AD43 C1AD44 C1AD60 C1AD61 C1AD63 C1AD65 C1AD66 C1AD71 C1AD72 C1AD73 C1AD74 C1AD89 C1AD90 C1AD91 C1AD92 C1AD94 C1AD95 C1AD96 C1AD97 C1AD98 C1AD99 C1AE11 C1AE12 C1AE13 C1AE14 C1AE15 C1AE16 C1AE17 C1AE18 C1AE19 C1AE20 C1AE21 C1AE22 C1AE23 C1AE24 C1AE25 C1AE26 C1AE27 C1AE28 C1AE30 C1AE31 C1AE32 C1AE33 C1AE34 C1AE35 C1AE36 C1AE37 C1AE38 C1AE39 C1AE40 C1AE42 C1AE43 C1AE44 C1AE45 C1AE46 C1AE47 C1AE48 C1AE49 C1AE50 C1AE52 C1AE53 C1AE55 . 275 . . 88 . 213 1230 1230 1230 . . 97 . . 87 1094 1094 1094 1094 . 931 . 931 . 932 . 930 . 932 . 931 . 931 . 930 . 930 . 930 . 930 . 930 . 934 . 934 . 934 . 934 . 935 . 930 . 930 . 934 . 934 . 934 . 934 . 934 . 931 . 931 . 932 . 930 . 932 . 933 . 931 . 931 . 869 . 871 . 930 . 930 . 930 . 930 . 930 . 934 . 934 . 934 . 934 . 935 . 930 . 934 . 934 . 935 . 934 . 934 . 931 Part No. Page C1AE56 C1AE57 C1AE58 C1AE59 C1AE60 C1AE61 C1AE62 C1AE63 C1AE64 C1AE65 C1AE66 C1AE67 C1AE68 C1AE69 C1AE70 C1AE72 C1AE73 C1AE74 C1AE75 C1AE76 C1AE77 C1AE78 C1AE79 C1AE80 C1AE81 C1AE82 C1AE83 C1AE84 C1AE85 C1AE86 C1AE88 C1AE91 C1AE92 C1AE94 C1AE95 C1AE96 C1AE98 C1AE99 C1AF11 C1AF13 C1AF14 C1AF15 C1AF17 C1AF18 C1AF19 C1AF20 C1AF21 C1AF23 C1AF24 C1AF25 C1AF27 C1AF28 C1AF29 C1AF30 C1AF31 C1AF32 C1AF35 C1AF36 C1AF37 C1AF38 C1AF39 C1AF40 C1AF42 . . 931 . . 932 . . 930 . . 931 . . 932 . . 933 . . 931 . . 931 . . 869 . . 871 . . 869 . . 931 . . 931 . . 932 . . 930 . . 932 . . 931 . . 931 . . 869 . . 871 . . 869 . . 871 . . 869 . . 934 . . 936 . . 930 . . 930 . . 930 . . 934 . . 934 . . 936 . . 936 . . 935 . . 930 . . 930 . . 934 . . 936 . . 935 . . 934 . . 934 . . 935 . . 936 . . 935 . . 936 . . 931 . . 931 . . 932 . . 932 . . 933 . . 931 . . 869 . . 871 . . 869 . . 934 . . 936 . . 934 . . 930 . . 930 . . 934 . . 934 . . 934 . . 936 . . 936 Part No. Page C1AF43 C1AF44 C1AF45 C1AF46 C1AF47 C1AF49 C1AF50 C1AF51 C1AF52 C1AF53 C1AF54 C1AF55 C1AF56 C1AF59 C1AF60 C1AF63 C1AF64 C1AF67 C1AF68 C1AF69 C1AF77 C1AF78 C1AF79 C1AF80 C1AF81 C1AF82 C1AG11 C1AG12 C1AG13 C1AG16 C1AG17 C1AG18 C1AG19 C1AG20 C1AG21 C1AG22 C1AG23 C1AG24 C1AG25 C1AG26 C1AG27 C1AG28 C1AG30 C1AG31 C1AG32 C1AG33 C1AG34 C1AG35 C1AG36 C1AG37 C1AG38 C1AG39 C1AG40 C1AG43 C1AG44 C1AG45 C1AG46 C1AG47 C1AG48 C1AG49 C1AG50 C1AG51 C1AG52 . 934 . 934 . 936 . 934 . 934 . 934 . 936 . 934 . 934 . 934 . 936 . 931 . 931 . 932 . 933 . 934 . 936 . 934 . 936 . 934 . 934 . 934 . 936 . 934 . 934 . 936 1101 1101 1101 1101 1101 1101 1101 1101 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 133 . 839 . 839 . 839 . 839 . 839 . 839 . 839 . 839 . 839 . 839 Part No. Page C1AG53 C1AG54 C1AG55 C1AG56 C1AG57 C1AG58 C1AG59 C1AG60 C1AG61 C1AG62 C1AG63 C1AG67 C1AG68 C1AG69 C1AG70 C1AG71 C1AG72 C1AG73 C1AG74 C1AG75 C1AG77 C1AG78 C1AG79 C1AG80 C1AG81 C1AG82 C1AG83 C1AG84 C1AG85 C1AG89 C1AG90 C1AG91 C1AG92 C1AG93 C1AG94 C1AG95 C1AG96 C1AG97 C1AG98 C1AG99 C1AH12 C1AH13 C1AH14 C1AH15 C1AH16 C1AH17 C1AH18 C1AH20 C1AH21 C1AH22 C1AH23 C1AH24 C1AH25 C1AH26 C1AH27 C1AH28 C1AH31 C1AH32 C1AH37 659 C1AH38 C1AH39 C1AH40 . .839 . .839 . .839 . .839 . .839 . .839 . .839 . .839 . .839 . .839 . .839 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .136 . .889 . .840 . .889 . .840 . .840 . .840 . .139 . .139 . .139 . .139 . .139 . .139 . .139 . .139 . .139 . .139 . .139 . .139 . .139 . .140 . .139 . .140 . .140 . .140 . .140 . .889 . .889 . .889 . .889 . 651, . .651 . .651 . .651 Part No. Page C1AH50 . 889 C1AH51 . 889 C1AH52 . 889 C1AH53 . 139 C1AH55 . 889 C1AH57 . 889 C1AH58 . 889 C1AH61 . 889 C1AH62 . 889 C1AH63 . 889 C1AH64 . 141 C1AH65 . 141 C1AH66 . 141 C1AH76 . 887 C1AH77 . 887 C1AH78 . 887 C1AH80 . 142 C1AH81 . 142 C1AH82 . 142 C1AH84 . 142 C1AH85 . 142 C1AH86 . 142 C1AH88 . 887 C1AH92 . 887 C1AH93 . 887 C1AH96 . 176 C1AJ12 . 643, 645, . . . . 647 C1AJ13 . 643, 645, . . . . 647 C1AJ14 . 643, 645, . . . . 648 C1AJ15 . 643, 645, . . . . 648 C1AJ17 . 643, 645, . . . . 648 C1AJ18 . 643, 645, . . . . 648 C1AJ19 . 643, 645, . . . . 648 C1AJ22 . . 646 C1AJ24 . . 143 C1AJ25 . . 143 C1AJ26 . . 143 C1AJ27 . . 143 C1AJ29 . . 650 C1AJ33 . . 650 C1AJ36 . . 887 C1AJ40 . . 887 C1AJ46 . . . 96 C1AJ47 . 1101 C1AJ48 . . 138 C1AJ49 . . 840 C1AJ50 . . 840 C1AJ51 . . 840 C1AJ52 . . 840 C1AJ53 . . 840 C1AJ54 . . 840 C1AJ55 . . 840 C1AJ58 . . 176 C1AJ60 . . 176 C1AJ70 . . 135 C1AJ71 . . 135 Part No. Page C1AJ72 . .878 C1AJ73 . .878 C1AJ75 . .878 C1AJ76 . .878 C1AJ77 . .878 C1AJ78 . .878 C1AJ79 . .878 C1AJ80 . .878 C1AJ81 . .878 C1AJ84 .1097 C1AJ85 .1097 C1AJ93 . 366, 367, . . . . .371 C1AJ95 . 366, 367 C1AJ97 . 366, 367 C1AK11 . .369 C1AK13 . .369 C1AK15 . 366, 367, . . . . .371 C1AK16 . 366, 367, . . . . .371 C1AK17 . 366, 367, . . . . .371 C1AK18 . .369 C1AK19 . .369 C1AK20 . .369 C1AK22 . 366, 371 C1AK23 . .366 C1AK25 . .369 C1AK26 . .373 C1AK27 . 366, 367, . . . . .371 C1AK29 . .393 C1AK31 . .101 C1AK34 . .298 C1AK38 . .118 C1AK43 . .888 C1AK45 .1049 C1AK46 .1049 C1AK48 .1248 C1AK52 . .953 C1AK53 . .953 C1AK55 . .953 C1AK56 . .953 C1AK58 . .954 C1AK60 . .108 C1AK61 . . 87, 89 C1AK63 . . .87 C1AK67 .1003 C1AK68 .1003 C1AK70 .1003 C1AK71 .1003 C1AK73 . .957 C1AK78 . 103, 146 C1AK80 . .157 C1AK81 . .157 C1AK82 . .102 C1AK83 . 103,
C1AA17 C1AA18 C1AA21 137 C1AA22 137 C1AA23 C1AA27 137 C1AA53 137 C1AA54 C1AA56 137 C1AA60 137 C1AA61 C1AA62 137 C1AA63 C1AA64 C1AA65 C1AA66 137 C1AA72 137 C1AA76 C1AA78 C1AA81 C1AA82 C1AA88 C1AA89 C1AA90 C1AA91 C1AA92 C1AA98 137 C1AA99 137 C1AB11 137 C1AB12 C1AB15 C1AB16 C1AB36 93 C1AB38 C1AB39 C1AB40 C1AB41 C1AB42 C1AB43 C1AB46 C1AB47 C1AB48 C1AB49 C1AB50 C1AB51 C1AB52 C1AB53 C1AB55 C1AB58 C1AB61
. .143 . .143 . 134, . 134, . .140 . 134, . 134, . .140 . 134, . 134, . .140 . 134, . .116 . . .91 . .140 . 134, . 134, . .118 . .163 . .140 . .140 . . .91 . .140 . .140 . .140 . .140 . 134, . 134, . 134, . .140 . . .87 . . .91 . . 91, . .134 . .137 . .134 . .137 . .137 . .134 . .141 . .141 . .142 . .142 . .140 . .140 . .140 . .140 . .141 . .162 . .162
1311

Part No. Page 146 C1AK88 . 103, 146 C1AK89 . 103, 146 C1AK90 . .157 C1AK92 . 102, 145 C1AL12 . .893 C1AL13 . .893 C1AL14 . .893 C1AL15 . .893 C1AL16 . .893 C1AL17 . .893 C1AL20 . .893 C1AL23 . .893 C1AL24 . .893 C1AL26 . .893 C1AL29 . .752 C1AL35 .1097 C1AL36 .1097 C1AL39 . 205, 207, . . . . .216 C1AL46 . .841 C1AL47 . .841 C1AL48 . .841 C1AL51 . .890 C1AL53 . .890 C1AL54 . .890 C1AL55 . .890 C1AL57 . .890 C1AL60 . .890 C1AL64 . .890 C1AL65 . .890 C1AL67 . .890 C1AL75 . .802 C1AL76 . .802 C1AL78 . .802 C1AL79 . .802 C1AL80 . .803 C1AL81 . 803, 1131 C1AL82 . .803 C1AL83 . 803, 1131 C1AL84 . 803, 1131 C1AL85 . .804 C1AL86 . .804 C1AL87 . 804, 1131 C1AL88 . 804, 1131 C1AL90 . 804, 1131 C1AL91 . .803 C1AL92 . 803, 1131 C1AL93 . .803 C1AL94 . .803 C1AL95 . 803, 1131 C1AL97 . 802, Part No. Page 1131 C1AL98 . . 802 C1AL99 . . 802 C1AM11 802, 1131 C1AM13 . 803 C1AM14 . 803 C1AM15 . 803 C1AM16 . 803 C1AM17 803, 1131 C1AM18 . 803 C1AM19 . 803 C1AM20 803, 1131 C1AM21 802, 1131 C1AM22 . 802 C1AM23 . 802 C1AM24 802, 1131 C1AM25 . 802 C1AM26 . 802 C1AM27 . 803 C1AM28 . 803 C1AM29 . 803 C1AM32 . 810 C1AM33 . 810 C1AM34 . . 94 C1AM35 804, 1131 C1AM36 . 804 C1AM37 804, 1131 C1AM38 804, 1131 C1AM39 810, 1125 C1AM40 . 830 C1AM41 813, 1128 C1AM42 830, 1128 C1AM44 830, 1128 C1AM45 830, 1128 C1AM46 . 814 C1AM47 . 814 C1AM48 . 814 C1AM50 814, 1128 C1AM51 814, 1128 C1AM52 814, 1128 C1AM53 813, 1128 C1AM54 813, 1128 C1AM55 813, 1128 C1AM57 815, Part No. Page 1130 C1AM64 1125 C1AM65 1125 C1AM73 C1AM74 C1AM75 C1AM77 C1AM78 C1AM79 C1AM80 C1AM81 C1AM82 C1AM83 C1AM84 C1AM85 C1AM86 C1AM88 C1AM89 C1AM90 C1AM91 C1AM92 C1AM93 C1AM94 C1AM95 C1AM96 C1AM97 C1AM98 C1AM99 C1AN11 C1AN12 C1AN13 C1AN14 C1AN15 C1AN17 C1AN18 C1AN19 C1AN20 C1AN21 C1AN22 C1AN23 C1AN24 C1AN25 C1AN26 C1AN27 C1AN28 C1AN29 C1AN30 C1AN31 C1AN32 C1AN33 C1AN35 C1AN36 C1AN37 C1AN39 C1AN40 C1AN41 C1AN42 C1AN43 C1AN44 C1AN45 C1AN46 Part No. Page C1AN47 C1AN48 C1AN49 C1AN50 C1AN53 C1AN55 C1AN56 C1AN57 C1AN58 C1AN59 C1AN60 C1AN61 C1AN62 C1AN64 C1AN66 C1AN67 C1AN68 C1AN69 C1AN70 C1AN72 C1AN73 C1AN74 C1AN75 C1AN76 C1AN77 C1AN79 C1AN80 C1AN81 C1AN82 C1AN83 C1AN85 C1AN86 C1AN87 C1AN88 C1AN89 C1AN90 C1AN91 C1AN92 C1AN93 C1AN94 C1AN95 C1AN96 C1AN97 C1AN98 C1AN99 C1AP11 C1AP13 C1AP14 C1AP15 C1AP16 C1AP17 C1AP18 C1AP19 C1AP20 C1AP21 C1AP22 C1AP23 C1AP24 C1AP25 C1AP26 C1AP27 C1AP28 C1AP29 . . 770 . . 770 . . 773 . . 773 . . 770 . . 770 . . 770 . . 770 . . 771 . . 771 . . 772 . . 772 . . 775 . . 776 . . 773 . . 773 . . 774 . . 775 . . 775 . . 771 . . 771 . . 772 . . 772 . . 774 . . 773 . . 773 . . 774 . . 775 . . 775 . . 775 . . 776 . . 771 . . 771 . . 771 . . 772 . . 775 . . 772 . . 772 . . 774 . . 773 . . 773 . . 774 . . 775 . . 775 . . 770 . . 775 . . 776 . . 764 . . 764 . . 764 . . 765 . . 765 . . 765 . . 765 . . 765 . . 767 . . 767 . . 767 . . 768 . . 768 . . 768 . . 768 . . 768 Part No. Page C1AP30 C1AP31 C1AP32 C1AP33 C1AP34 C1AP35 C1AP36 C1AP37 C1AP38 C1AP39 C1AP40 C1AP41 C1AP42 C1AP43 C1AP44 C1AP45 C1AP46 C1AP47 C1AP48 C1AP49 C1AP50 C1AP51 C1AP52 C1AP53 C1AP54 C1AP55 C1AP56 C1AP57 C1AP58 C1AP59 C1AP60 C1AP61 C1AP62 C1AP63 C1AP64 C1AP65 C1AP66 C1AP67 C1AP68 C1AP69 C1AP70 C1AP71 C1AP72 C1AP73 C1AP74 C1AP75 C1AP76 C1AP77 C1AP78 C1AP79 C1AP80 C1AP81 C1AP82 C1AP83 C1AP84 C1AP85 C1AP86 C1AP87 C1AP88 C1AP89 C1AP90 C1AP91 C1AP92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 766 766 766 764 764 825 764 764 765 765 765 765 767 767 767 768 768 768 768 768 766 766 766 766 766 763 763 763 763 769 763 764 766 764 764 825 765 765 765 765 767 767 768 768 768 768 766 766 766 766 763 763 763 764 763 764 766 763 763 764 763 764 825 Part No. Page C1AP93 C1AP94 C1AP95 C1AP96 C1AP97 C1AP98 C1AP99 C1AQ11 C1AQ12 C1AQ13 C1AQ14 C1AQ15 C1AQ16 C1AQ17 C1AQ18 C1AQ19 C1AQ20 C1AQ21 C1AQ22 C1AQ23 C1AQ25 C1AQ26 C1AQ27 C1AQ28 C1AQ29 C1AQ30 C1AQ31 C1AQ32 C1AQ33 C1AQ34 C1AQ36 C1AQ37 C1AQ38 C1AQ39 C1AQ40 C1AQ41 C1AQ42 C1AQ43 C1AQ44 C1AQ45 C1AQ46 C1AQ47 C1AQ48 C1AQ49 C1AQ50 C1AQ51 C1AQ52 C1AQ53 C1AQ54 C1AQ55 C1AQ56 C1AQ57 C1AQ58 C1AQ59 C1AQ60 C1AQ61 C1AQ62 C1AQ63 C1AQ64 C1AQ65 C1AQ66 C1AQ67 C1AQ68 . .764 . .765 . .765 . .765 . .767 . .767 . .768 . .768 . .768 . .766 . .769 . .769 . .769 . .766 . .763 . .763 . .763 . .769 . .763 . .764 . .765 . .766 . .766 . .764 . .764 . .825 . .765 . .765 . .765 . .765 . .765 . .765 . .767 . .767 . .767 . .768 . .768 . .768 . .768 . .768 . .768 . .766 . .766 . .766 . .769 . .769 . .769 . .766 . .766 . .763 . .763 . .763 . .769 . .763 . .763 . .764 . .764 . .825 . .765 . .765 . .765 . .765 . .765 Part No. Page C1AQ69 C1AQ70 C1AQ71 C1AQ72 C1AQ73 C1AQ74 C1AQ75 C1AQ76 C1AQ77 C1AQ78 C1AQ79 C1AQ80 C1AQ82 C1AQ83 C1AQ84 C1AQ85 C1AQ86 C1AQ87 C1AQ88 C1AQ89 C1AQ90 C1AQ91 C1AQ92 C1AQ93 C1AQ94 C1AQ95 C1AQ97 C1AQ99 C1AR11 C1AR14 C1AR15 C1AR16 C1AR18 C1AR19 C1AR20 C1AR23 C1AR24 C1AR27 C1AR28 C1AR29 C1AR30 C1AR32 C1AR33 C1AR34 C1AR36 C1AR39 C1AR40 C1AR41 C1AR42 C1AR45 C1AR46 C1AR47 C1AR48 C1AR49 C1AR50 C1AR51 C1AR53 C1AR54 C1AR55 C1AR56 C1AR57 C1AR58 C1AR59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 767 767 768 768 768 768 768 768 766 766 766 769 769 766 766 763 763 763 763 769 763 763 764 770 770 770 770 770 773 764 765 765 767 768 768 766 763 782 783 783 783 781 781 782 780 780 780 781 781 781 784 782 783 783 783 783 781 781 782 780 780 780 780 Part No. Page C1AR60 C1AR61 C1AR64 C1AR65 C1AR67 C1AR68 C1AR69 C1AR70 C1AR71 C1AR72 C1AR73 C1AR74 C1AR75 C1AR76 C1AR77 C1AR78 C1AR79 C1AR80 C1AR81 C1AR85 C1AR88 C1AR89 C1AR90 C1AR91 C1AR92 C1AR93 C1AR94 C1AR98 C1AS13 C1AS14 C1AS15 C1AS16 C1AS17 C1AS20 C1AS21 C1AS22 C1AS23 C1AS24 C1AS25 C1AS26 C1AS27 C1AS28 C1AS29 C1AS30 C1AS31 C1AS32 C1AS33 C1AS34 C1AS35 C1AS36 C1AS37 C1AS38 C1AS39 C1AS40 C1AS41 C1AS42 C1AS44 C1AS46 C1AS47 C1AS48 C1AS49 C1AS50 C1AS51 . .781 . .781 . .780 . .780 . .784 . .782 . .783 . .783 . .783 . .783 . .781 . .781 . .782 . .780 . .780 . .780 . .780 . .781 . .781 . .782 . .782 . .780 . .780 . .780 . .780 . .781 . .781 . .783 . .780 . .780 . .781 . .782 . .782 . .780 . .780 . .781 . .777 . .777 . .777 . .778 . .779 . .779 . .777 . .777 . .777 . .777 . .777 . .778 . .778 . .778 . .779 . .779 . .779 . .779 . .778 . .777 . .780 . .777 . .777 . .777 . .778 . .778 . .778 . 810, . 810, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 771 772 774 773 773 773 774 774 775 775 776 776 776 771 771 772 775 774 773 773 774 775 775 770 770 770 770 770 770 775 776 771 772 774 773 773 773 774 775 775 770 770 770 770 770 770 775 776 774 773 773 774 775 770 770 770 770 770
Fluid Conveying
1312

Part No. Page C1AS52 C1AS53 C1AS54 C1AS55 C1AS56 C1AS57 C1AS58 C1AS59 C1AS60 C1AS61 C1AS62 C1AS65 C1AS66 C1AS67 C1AS68 C1AS69 C1AS70 C1AS71 C1AS72 C1AS73 C1AS75 C1AS76 C1AS77 C1AS78 C1AS79 C1AS80 C1AS81 C1AS83 C1AS84 C1AS85 C1AS86 C1AS87 C1AS88 C1AS89 C1AS90 C1AS93 C1AS94 C1AS95 C1AS96 C1AS97 C1AS98 C1AS99 C1AT13 C1AT21 C1AT22 C1AT25 C1AT31 C1AT33 C1AT34 C1AT37 C1AT38 C1AT39 C1AT40 C1AT41 C1AT42 C1AT43 C1AT47 C1AT48 C1AT49 C1AT50 C1AT51 C1AT52 C1AT53 . .779 . .779 . .779 . .779 . .779 . .779 . .778 . .778 . .778 . .777 . .777 . .777 . .777 . .777 . .778 . .779 . .779 . .779 . .779 . .779 . .778 . .777 . .777 . .777 . .777 . .778 . .779 . .777 . .777 . .777 . .777 . .778 . .779 . .779 . .779 . .777 . .777 . .778 . .778 . .779 . .779 . .779 . .777 . .791 . .791 . .791 . .791 . .791 . .791 . .791 . .791 . .791 . .930 . .930 . .930 . .930 . .934 . .934 . .935 . .934 . .934 . .935 . .930 Part No. Page C1AT54 C1AT56 C1AT57 C1AT58 C1AT59 C1AT60 C1AT61 C1AT62 C1AT63 C1AT64 C1AT65 C1AT66 C1AT67 C1AT68 C1AT69 C1AT70 C1AT71 C1AT73 C1AT74 C1AT75 C1AT77 C1AT78 C1AT79 C1AT80 C1AT81 C1AU23 C1AU27 C1AU28 C1AU29 C1AU31 C1AU32 C1AU33 C1AU34 C1AU35 C1AU58 C1AU59 C1AU60 C1AU62 C1AU63 C1AU64 C1AU65 C1AU66 C1AU67 C1AU70 C1AU71 C1AU74 C1AU75 C1AU76 C1AU77 C1AU78 C1AU79 C1AU81 C1AU82 C1AU83 C1AU84 C1AU85 C1AU86 C1AU88 C1AU89 C1AU90 C1AU91 C1AU92 C1AU93 . . 930 . . 930 . . 934 . . 934 . . 934 . . 934 . . 935 . . 931 . . 930 . . 933 . . 930 . . 930 . . 930 . . 930 . . 934 . . 934 . . 934 . . 931 . . 931 . . 932 . . 931 . . 932 . . 933 . . 931 . . 931 1045 1045 1052 1052 1052 1052 1052 1052 1052 . 649 . 649 . 649 . 966 . 966 . 966 . 966 . 966 . 966 . 986 . 986 . 962 1044 . 962 1044 . 962 . 962 . 962 . 962 1044 . 963 . 963 . 962 . 962 . 962 . 962 . 963 . 963 . 963 Part No. Page C1AU94 C1AU95 C1AU96 C1AU97 C1AU99 C1AV11 C1AV12 C1AV14 C1AV15 C1AV16 C1AV18 C1AV20 C1AV21 C1AV22 C1AV23 C1AV24 C1AV25 C1AV26 C1AV27 C1AV28 C1AV29 C1AV30 C1AV31 C1AV32 C1AV33 C1AV34 C1AV35 C1AV36 C1AV40 C1AV41 C1AV42 C1AV43 C1AV44 C1AV45 C1AV46 C1AV47 C1AV48 C1AV49 C1AV50 C1AV51 C1AV52 C1AV53 C1AV54 C1AV56 C1AV57 C1AV58 C1AV59 C1AV60 C1AV61 C1AV62 C1AV63 C1AV64 C1AV67 C1AV68 C1AV69 C1AV70 C1AV71 C1AV73 C1AV74 C1AV75 C1AV77 C1AV78 C1AV79 . 963 . 963 . 963 . 963 . 963 1044 . 962 . 962 1044 . 962 . 962 . 962 . 962 . 962 1044 . 962 1044 . 962 1044 . 962 1044 . 962 . 962 1044 . 962 1044 . 962 . 963 . 965 . 965 . 965 . 965 . 965 . 964 . 964 . 964 . 965 . 965 . 965 . 965 . 964 . 964 . 964 . 964 . 964 . 964 . 964 . 965 . 965 . 964 . 964 . 964 . 967 . 967 . 967 . 967 . 967 . 966 . 967 . 966 . 966 . 966 . 966 Part No. Page C1AV80 . . 966 C1AV81 . . 966 C1AV82 . . 966 C1AV83 . . 966 C1AV84 . . 966 C1AV85 . . 966 C1AV86 . . 968 C1AV87 . 1044 C1AV88 . . 968 C1AV89 . . 968 C1AV90 . . 968 C1AV91 . . 968 C1AV92 . . 968 C1AV93 . 1044 C1AV94 . . 968 C1AV95 . . 968 C1AV96 . . 968 C1AV97 . . 967 C1AV99 . . 967 C1AW11 . 967 C1AW12 . 967 C1AW13 . 968 C1AW14 . 968 C1AW15 . 969 C1AW16 . 969 C1AW17 . 969 C1AW19 . 969 C1AW20 1044 C1AW21 . 967 C1AW22 . 967 C1AW23 1044 C1AW24 . 967 C1AW25 . 967 C1AW26 . 968 C1AW27 . 968 C1AW28 . 968 C1AW30 1044 C1AW31 . 968 C1AW32 1044 C1AW33 . 968 C1AW34 . 968 C1AW35 . 968 C1AW36 . 968 C1AW37 1044 C1AW38 . 968 C1AW39 1044 C1AW40 . 968 C1AW42 . 969 C1AW43 . 969 C1AW44 . 969 C1AW45 . 969 C1AW47 . 970 C1AW48 . 970 C1AW49 . 970 C1AW50 . 970 C1AW51 . 970 C1AW52 . 970 C1AW54 . 970 C1AW55 . 970 C1AW56 . 970 C1AW58 . 970 C1AW59 . 978 C1AW60 . 978 Part No. Page C1AW61 C1AW62 C1AW63 C1AW64 C1AW66 C1AW67 C1AW68 C1AW69 C1AW70 C1AW71 C1AW72 C1AW73 C1AW74 C1AW75 C1AW76 C1AW77 C1AW78 C1AW79 C1AW80 C1AW81 C1AW82 C1AW83 C1AW84 C1AW85 C1AW86 C1AW87 C1AW88 C1AW89 C1AW90 C1AW91 C1AW92 C1AW96 C1AW97 C1AW98 C1AW99 C1AX11 C1AX12 C1AX13 C1AX14 C1AX15 C1AX16 C1AX17 C1AX18 C1AX20 C1AX21 C1AX22 C1AX23 C1AX24 C1AX25 C1AX26 C1AX27 C1AX28 C1AX29 C1AX30 C1AX31 C1AX32 C1AX33 C1AX34 C1AX35 C1AX36 C1AX37 C1AX38 C1AX39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 978 978 978 978 978 978 978 978 978 978 978 978 978 978 978 978 978 978 978 988 988 988 988 988 988 989 989 989 989 988 988 989 989 989 989 989 989 989 989 989 989 989 989 988 988 988 988 988 988 988 988 988 988 988 988 988 988 988 989 971 971 971 971 Part No. Page C1AX40 C1AX41 C1AX42 C1AX43 C1AX44 C1AX47 C1AX48 C1AX49 C1AX50 C1AX51 C1AX52 C1AX54 C1AX55 C1AX56 C1AX57 C1AX58 C1AX59 C1AX60 C1AX61 C1AX62 C1AX64 C1AX65 C1AX66 C1AX68 C1AX69 C1AX70 C1AX71 C1AX73 C1AX74 C1AX75 C1AX76 C1AX77 C1AX78 C1AX79 C1AX80 C1AX81 C1AX82 C1AX83 C1AX84 C1AX85 C1AX86 C1AX88 C1AX89 C1AX90 C1AX91 C1AX92 C1AX94 C1AX95 C1AX97 C1AX98 C1AX99 C1AY13 C1AY14 C1AY15 C1AY16 C1AY17 C1AY18 C1AY19 C1AY20 C1AY21 C1AY22 C1AY23 C1AY24 . .971 . .971 . .971 . .971 . .971 . .971 . .971 . .971 . .971 . .971 . .971 . .971 . .984 . .984 . .993 . .993 . .993 . .993 . .993 . .993 . .993 . .993 . .985 . .972 . .972 . .972 . .972 . .985 . .985 . .985 . .985 . .985 . .985 . .985 . .986 . .986 . .986 . .986 . .986 . .986 . .986 . .652 . .652 . .984 . .984 . .984 . .984 . .984 . .984 . .984 . .984 . .812 . .812 . .982 . .982 . .982 . .982 . .982 . .982 . .163 . .163 . .163 . .163 Part No. Page C1AY26 C1AY27 C1AY28 C1AY29 C1AY30 C1AY31 C1AY32 C1AY33 C1AY34 C1AY35 C1AY36 C1AY37 C1AY38 C1AY39 C1AY40 C1AY41 C1AY42 C1AY43 C1AY44 C1AY45 C1AY46 C1AY47 C1AY48 C1AY49 C1AY50 C1AY51 C1AY52 C1AY53 C1AY54 C1AY55 C1AY56 C1AY57 C1AY58 C1AY59 C1AY60 C1AY61 C1AY62 C1AY63 C1AY64 C1AY65 C1AY66 C1AY67 C1AY68 C1AY69 C1AY70 C1AY71 C1AY72 C1AY73 C1AY74 C1AY75 C1AY76 C1AY78 C1AY79 C1AY80 C1AY82 C1AY83 C1AY84 C1AY85 C1AY86 C1AY87 C1AY88 C1AY89 C1AY90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 952 952 952 952 952 952 952 952 952 952 952 952 952 979 979 979 979 979 979 979 979 981 981 981 981 982 982 982 982 982 982 953 953 953 954 953 953 954 954 954 953 953 953 953 953 953 953 953 954 954 954 954 954 954 954 954 958 958 958 958 957 958 958 Part No. Page C1AY91 C1AY92 C1AY93 C1AY94 C1AY95 C1AY96 C1AY97 C1AY98 C1AY99 C1AZ11 C1AZ12 C1AZ13 C1AZ14 C1AZ15 C1AZ17 C1AZ18 C1AZ19 C1AZ20 C1AZ22 C1AZ23 C1AZ24 C1AZ25 C1AZ26 C1AZ27 C1AZ28 C1AZ29 C1AZ30 C1AZ31 C1AZ32 C1AZ33 C1AZ34 C1AZ35 C1AZ36 C1AZ37 C1AZ38 C1AZ39 C1AZ41 C1AZ42 C1AZ43 C1AZ44 C1AZ45 C1AZ46 C1AZ47 C1AZ48 C1AZ49 C1AZ50 C1AZ51 C1AZ52 C1AZ53 C1AZ54 C1AZ55 C1AZ56 C1AZ57 C1AZ58 C1AZ59 C1AZ60 C1AZ61 C1AZ62 C1AZ63 C1AZ64 C1AZ65 C1AZ66 C1AZ67 . .957 . .957 . .957 . .957 . .958 . .957 . .957 . .958 . .958 . .958 . .958 . .958 . .955 . .955 . .955 . .955 . .955 . .955 . .990 . .990 . .990 . .990 . .990 . .990 . .990 . .990 . .990 . .990 . .991 . .991 . .991 . .991 . .992 . .992 . .992 . .991 . .992 . .992 . .992 . .992 . .992 . .992 . .992 . .992 . .991 . .991 . .991 . .991 . .991 . .991 . .991 . .991 . .991 . .991 . .991 . .992 . .992 . .992 . .992 .1008 .1008 .1008 .1008
1313

Part No. Page C1AZ68 C1AZ69 C1AZ70 C1AZ71 C1AZ72 C1AZ73 C1AZ74 C1AZ75 C1AZ76 C1AZ77 C1AZ78 C1AZ79 C1AZ80 C1AZ81 C1AZ84 C1AZ85 C1AZ87 C1AZ88 C1AZ89 C1AZ90 C1AZ91 C1AZ92 C1AZ93 C1AZ94 C1AZ95 C1AZ96 C1AZ97 C1AZ98 C1AZ99 C1BA11 C1BA13 C1BA14 C1BA15 C1BA16 C1BA17 C1BA18 C1BA19 C1BA20 C1BA21 C1BA22 C1BA23 C1BA24 C1BA25 C1BA26 C1BA27 C1BA28 C1BA30 C1BA31 C1BA32 C1BA34 C1BA35 C1BA36 C1BA37 C1BA38 C1BA39 C1BA40 C1BA41 C1BA42 C1BA43 C1BA44 C1BA45 C1BA46 C1BA47 .1008 .1008 .1008 . .973 . .973 . .973 . .973 . .973 . .973 . .973 . .973 . .973 . .975 . .975 . .975 . .975 . .975 . .975 . .975 . .975 . .975 . .975 . .975 . .975 . .975 . .981 . .981 . .981 . .981 . .981 . .981 . .981 . .983 . .983 . .983 . .983 . .983 . .983 . .982 . .982 . .982 . .982 . .982 . .163 . .961 . .961 . .961 . .961 . .961 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 Part No. Page C1BA48 C1BA49 C1BA50 C1BA51 C1BA52 C1BA53 C1BA54 C1BA55 C1BA56 C1BA57 C1BA58 C1BA59 C1BA60 C1BA61 C1BA62 C1BA63 C1BA64 C1BA65 C1BA66 C1BA67 C1BA68 C1BA69 C1BA70 C1BA71 C1BA72 C1BA73 C1BA74 C1BA75 C1BA76 C1BA77 C1BA82 C1BA83 C1BA84 C1BA85 C1BA86 C1BA87 C1BA88 C1BA89 C1BA90 C1BA91 C1BA92 C1BA93 C1BA94 C1BA95 C1BA96 C1BA97 C1BA98 C1BA99 C1BB11 C1BB12 C1BB13 C1BB14 C1BB15 C1BB16 C1BB17 C1BB18 C1BB19 C1BB20 C1BB21 C1BB22 C1BB23 C1BB24 C1BB25 . . 951 . . 951 . . 951 . . 951 . . 951 . . 951 . . 952 . . 952 . . 952 . . 952 . . 952 . . 952 . . 952 . . 952 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 956 . . 956 . . 956 . . 956 . . 956 . . 956 . . 956 . . 956 . . 956 . . 958 . . 958 . . 958 . . 958 . . 958 . . 958 . . 958 . . 956 . . 956 . . 956 . . 956 . . 956 . . 957 . . 957 . . 957 . . 956 . . 956 . . 957 . . 957 . . 956 . . 956 . . 956 Part No. Page C1BB26 C1BB27 C1BB28 C1BB29 C1BB30 C1BB31 C1BB32 C1BB33 C1BB34 C1BB35 C1BB36 C1BB37 C1BB38 C1BB39 C1BB40 C1BB41 C1BB42 C1BB43 C1BB44 C1BB45 C1BB46 C1BB47 C1BB48 C1BB49 C1BB50 C1BB51 C1BB52 C1BB53 C1BB54 C1BB55 C1BB57 C1BB58 C1BB59 C1BB60 C1BB61 C1BB62 C1BB63 C1BB64 C1BB65 C1BB68 C1BB69 C1BB80 C1BB81 C1BB83 C1BB84 C1BB85 C1BB86 C1BB87 C1BB88 C1BB89 C1BB90 C1BB91 C1BB92 C1BB93 C1BB94 C1BB95 C1BB97 C1BB99 C1BC11 C1BC12 C1BC13 C1BC14 C1BC15 . 956 . 956 . 957 . 957 . 957 . 163 . 163 . 961 . 961 . 960 . 961 . 961 . 960 . 961 . 961 . 960 . 960 . 960 . 960 . 960 . 960 . 959 . 959 . 959 . 959 . 959 . 959 . 959 . 959 . 959 . 959 . 955 . 955 . 955 . 955 . 954 . 954 . 954 . 955 1097 1097 . 972 . 972 . 972 . 972 . 972 . 986 . 986 . 986 . 986 . 986 . 986 . 986 . 986 . 986 . 986 . 878 . 298 . 162 . 162 . 162 . 162 . 162 Part No. Page C1BC16 C1BC17 C1BC18 C1BC19 C1BC21 C1BC22 C1BC39 C1BC42 149 C1BC54 C1BC55 C1BC56 C1BC57 C1BC58 C1BC59 C1BC61 C1BC62 C1BC63 C1BC64 C1BC65 C1BC66 C1BC67 C1BC68 C1BC69 C1BC70 C1BC71 C1BC72 C1BC73 C1BC74 C1BC75 C1BC76 C1BC77 C1BC78 C1BC79 C1BC80 C1BC81 C1BC82 C1BC83 C1BC84 C1BC86 C1BC87 1157 C1BC88 C1BC89 C1BC90 C1BC91 C1BC95 C1BC98 C1BC99 C1BD14 C1BD15 C1BD16 C1BD17 C1BD18 C1BD19 C1BD20 C1BD21 C1BD22 C1BD23 C1BD24 C1BD25 C1BD26 C1BD27 . . 162 . . 162 . . 162 . . 162 . . 162 . . 162 . 1056 . . 99, . . 979 . . 979 . . 979 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 980 . . 974 . . 974 . . 974 . . 974 . . 973 . . 974 . . 974 . . 973 . . 973 . . 973 . . 974 . . 974 . . 973 . . 758 . 752, . . 953 . . 953 . . 953 . . 953 . 1049 . . 638 . 1053 . . 964 . . 964 . . 964 . . 964 . . 964 . . 964 . . 964 . . 964 . . 964 . . 965 . . 965 . . 965 . . 965 . . 965 Part No. Page C1BD28 . 965 C1BD29 . 965 C1BD30 . 965 C1BD31 . 965 C1BD32 . 965 C1BD33 . 965 C1BD34 . 973 C1BD35 . 973 C1BD36 . 973 C1BD38 . 973 C1BD39 . 973 C1BD40 . 973 C1BD43 . 955 C1BD44 . 955 C1BD45 . 970 C1BD46 . 970 C1BD47 . 970 C1BD48 . 970 C1BD49 . 969 C1BD50 . 970 C1BD51 . 970 C1BD52 . 970 C1BD53 . 970 C1BD54 . 970 C1BD55 . 957 C1BD56 . 957 C1BD57 . 957 C1BD59 . 960 C1BD60 1098 C1BD61 1098 C1BD65 . 959 C1BD66 . 959 C1BD67 . 959 C1BD68 . 959 C1BD69 . 959 C1BD70 . 959 C1BD71 . 959 C1BD73 1099, . . . . . . . . 1142 C1BD74 1099, . . . . . . . . 1142 C1BD75 1099, . . . . . . . . 1142 C1BD76 1099 C1BD77 1099 C1BD78 1099 C1BD79 1099, . . . . . . . . 1142 C1BD80 1099, . . . . . . . . 1142 C1BD82 . 990 C1BD83 . 990 C1BD84 . 990 C1BD85 . 990 C1BD86 . 990 C1BD87 1050 C1BD89 1050 C1BD90 1050 C1BD92 . .91, 93 C1BD93 . 116 C1BE22 1039 C1BE35 1039 Part No. Page C1BE37 C1BE38 C1BE39 C1BE46 C1BE57 C1BE60 C1BE62 C1BE74 C1BE77 C1BE84 C1BE85 C1BE86 C1BE96 C1BE97 C1BE98 C1BF17 C1BF31 96 C1BF52 C1BF53 C1BF54 C1BF55 C1BF59 C1BF60 C1BF61 C1BF62 C1BF64 C1BF65 C1BF67 C1BF69 C1BF70 C1BF72 C1BF74 C1BF77 C1BF78 C1BF86 C1BF92 C1BG11 C1BG12 C1BG15 C1BG20 C1BG24 C1BG29 C1BG31 C1BG39 C1BG43 C1BG49 C1BG53 C1BG61 C1BG69 C1BG72 C1BG73 C1BG75 367 C1BG79 C1BG83 C1BG84 C1BG88 C1BH13 C1BH19 C1BH24 C1BH29 C1BH30 .1039 .1039 .1039 .1038 .1037 .1037 .1037 .1040 .1037 .1037 .1037 . . .98 .1041 .1041 .1041 .1054 . . 94, . .978 . .978 . .978 . .978 . .962 . .962 . .962 . .962 . .962 . .962 . .963 . .964 . .964 . .965 . .987 . .635 . .902 .1050 .1050 .1051 .1051 .1048 .1046 .1046 .1046 .1045 .1045 .1045 .1045 .1047 .1047 .1047 .1097 .1097 . 366, . .968 . .968 . .968 . .969 .1048 . .118 .1046 . .721 . .721 Part No. Page C1BH31 . 721 C1BH32 . 721 C1BH33 . 721 C1BH34 . 328 C1BH39 1050 C1BH40 . 740 C1BH45 . 829 C1BH46 . 829 C1BH47 . 829 C1BH48 . 829 C1BH49 . 829 C1BH50 . 829 C1BH51 . 829 C1BH56 . 984 C1BH57 . 984 C1BH64 . 984 C1BH66 . 984 C1BH67 . 984 C1BH71 . 907 C1BH79 . 907 C1BH93 . 87, 89 C1BH98 . 704 C1BH99 . 704 C1BJ11 . . 704 C1BJ12 . . 704 C1BJ14 . . 704 C1BJ15 . . 704 C1BJ16 . . 704 C1BJ20 . . 700 C1BJ21 . . 700 C1BJ22 . . 700 C1BJ23 . . 700 C1BJ24 . . 700 C1BJ33 . . 908 C1BJ77 91, 93 C1BJ78 91, 93 C1BJ79 . . 745 C1BJ82 . . 745 C1BJ83 . 744, 1118 C1BJ84 . 744, 1118 C1BJ87 . 744, 1118 C1BJ92 . . . 93 C1BJ94 . . 907 C1BJ99 . 656, 660, . . . . 667 C1BK11 . 659 C1BK16 . 276 C1BK20 . 953 C1BK22 1235 C1BK23 . 930 C1BK24 . 930 C1BK25 . 930 C1BK26 . 930 C1BK27 . 930 C1BK28 . 930 C1BK29 . 930 C1BK31 . 934 C1BK32 . 934 C1BK33 . 930 Part No. Page C1BK34 C1BK35 C1BK36 C1BK37 C1BK38 C1BK39 C1BK40 C1BK41 C1BK42 C1BK43 C1BK44 C1BK45 C1BK46 C1BK47 C1BK49 C1BK50 C1BK51 C1BK52 C1BK53 C1BK54 C1BK55 C1BK56 C1BK57 C1BK58 C1BK60 C1BK61 C1BK63 C1BK64 C1BK65 C1BK66 C1BK67 C1BK68 C1BK69 C1BK70 C1BK71 C1BK72 C1BK73 C1BK74 C1BK75 C1BK76 C1BK77 C1BK80 C1BK81 C1BK82 C1BK83 C1BK84 C1BK87 C1BK88 C1BK89 C1BK90 C1BK91 C1BK92 C1BK94 C1BK96 C1BK98 C1BK99 C1BL11 C1BL12 C1BL14 C1BL15 C1BL16 C1BL20 C1BL21 . .934 . .934 . .934 . .935 . .934 . .935 . .931 . .931 . .869 . .871 . .931 . .931 . .932 . .930 . .932 . .933 . .931 . .931 . .869 . .869 . .871 . .869 . .871 . .869 . .930 . .930 . .934 . .934 . .935 . .934 . .934 . .935 . .930 . .930 . .934 . .934 . .935 . .934 . .935 . .934 . .935 . .931 . .932 . .930 . .932 . .933 . .871 . .869 . .871 . .869 . .934 . .934 . .930 . .930 . .934 . .934 . .936 . .934 . .934 . .934 . .934 . .934 . .934
Fluid Conveying
1314

Part No. Page C1BL22 C1BL23 C1BL24 C1BL25 C1BL60 C1BL63 C1BL65 C1BL73 C1BM14 93 C1BM16 C1BM19 C1BM27 C1BM45 C1BM49 C1BM50 C1BM51 C1BM52 C1BM54 89 C1BM55 89 C1BM56 89 C1BM57 C1BM60 C1BM61 C1BM62 1129 C1BM63 1129 C1BM64 C1BM65 1129 C1BM67 C1BM68 C1BM71 C1BM72 C1BM73 C1BM74 C1BM75 C1BM76 C1BM78 C1BN17 C1BN18 C1BN19 149 C1BN20 C1BN21 96 C1BN23 C1BN24 C1BN25 C1BN26 C1BN27 C1BN44 C1BN45 C1BN46 C1BN47 C1BN48 C1BN49 C1BN51 C1BN53 . .935 . .934 . .934 . .936 . .149 . .149 . .149 . .276 . . 91, .1097 .1236 . .111 . . .90 . . .90 . . .90 . . .90 . . .90 . . 87, . . 87, . . 87, . . .86 . .813 . .813 . 813, . 813, . .813 . 813, . .813 . .814 . . .86 . . .86 . . .86 . . .86 . . .86 . . .86 . .123 . . .90 . . .90 . . 97, . . .98 . . 94, .1235 . .930 . .930 . .930 . .930 . .870 . .870 . .870 . .870 . .870 . .870 . .870 . .870 Part No. Page C1BN54 . 870 C1BN59 . 866 C1BN66 . 833 C1BN68 . 833 C1BN69 . 801 C1BN70 . 833 C1BN71 . 833 C1BN72 . 833 C1BN73 . 801 C1BN74 . 833 C1BN75 . 801 C1BN91 . 801 C1BN94 . 144 C1BN95 . 144 C1BN96 1097 C1BN99 . 151 C1BP11 . . 833 C1BP12 . . 800 C1BP13 . . 833 C1BP14 . . 833 C1BP15 . . 800 C1BP16 . . 833 C1BP17 . . 800 C1BP18 . . 833 C1BP19 . . 800 C1BP21 . . 800 C1BP22 . . 833 C1BP23 . . 800 C1BP24 . . 833 C1BP26 . . 833 C1BP27 . . 800 C1BP28 . . 833 C1BP29 . . 800 C1BP30 . . 833 C1BP32 . . 800 C1BP33 . . 800 C1BP34 . . 800 C1BP35 . . 800 C1BP36 . . 800 C1BP37 . . 800 C1BP38 . . 800 C1BP39 . . 800 C1BP42 . . 833 C1BP45 . . . 97 C1BP46 . . . 97 C1BP54 . . 118 C1BP55 . . . 98 C1BP56 . . . 98 C1BP57 . . . 96 C1BP58 . . . 96 C1BP59 . . . 95 C1BP69 . . . 95 C1BP80 . . . 95 C1BP85 . . 738 C1BP87 . . 130 C1BP88 . . 130 C1BP89 . . 130 C1BP90 . 1242 C1BP94 . . 117 C1BQ17 . 833 C1BQ18 . 801 C1BQ19 . 801 C1BQ20 . 801 Part No. Page C1BQ21 C1BQ22 C1BQ23 C1BQ24 C1BQ25 C1BQ26 1130 C1BQ27 1130 C1BQ28 1130 C1BQ29 1130 C1BQ30 1130 C1BQ31 C1BQ32 C1BQ33 C1BQ34 C1BQ35 C1BQ36 C1BQ37 C1BQ38 1130 C1BQ39 1130 C1BQ40 1130 C1BQ41 1130 C1BQ42 1130 C1BQ43 C1BQ44 C1BQ45 C1BQ46 C1BQ47 C1BQ48 C1BQ49 C1BQ50 C1BQ52 C1BQ53 C1BQ54 C1BQ55 C1BQ56 C1BQ63 C1BQ64 C1BQ65 C1BQ66 C1BQ67 C1BQ68 C1BQ69 C1BQ70 C1BQ71 C1BQ75 C1BQ77 C1BQ79 C1BQ81 C1BQ87 1126 C1BQ88 1126 C1BQ89 . 801 . 801 . 801 . 802 . 802 . 801, . 801, . 801, . 801, . 801, . 801 . 801 . 801 . 801 . 801 . 801 . 801 . 801, . 801, . 801, . 801, . 801, . 800 . 800 . 800 . 800 . 800 . 800 . 800 . 800 . 800 . 802 . 802 . 802 . 802 . 638 . 337 . 328 . 328 . 723 . 723 . 723 . 723 . 723 . 807 . 807 . 807 . 807 . 834, . 834, . 834, Part No. Page 1126 C1BQ90 1126 C1BQ91 1126 C1BQ92 1126 C1BQ93 1126 C1BQ94 1126 C1BQ95 C1BQ96 C1BQ97 1126 C1BQ98 1126 C1BQ99 1126 C1BR11 1126 C1BR12 1126 C1BR13 1126 C1BR14 C1BR15 C1BR16 C1BR17 C1BR18 C1BR19 C1BR21 C1BR22 C1BR23 C1BR26 C1BR28 C1BR29 C1BR30 C1BR31 C1BR32 C1BR33 C1BR34 C1BR35 C1BR37 C1BR38 C1BR39 C1BR40 1124 C1BR41 1124 C1BR42 1124 C1BR43 1124 C1BR44 1124 C1BR45 1124 C1BR48 C1BR49 C1BR50 C1BR51 C1BR53 Part No. Page C1BR54 . 871 C1BR55 . 869 C1BR56 . 869 C1BR57 . 869 C1BR62 1249 C1BR64 . 954 C1BR65 . 954 C1BR66 . 954 C1BR67 . 954 C1BR68 . 955 C1BR72 . 997 C1BR73 . 997 C1BR74 . 997 C1BR76 . 997 C1BR77 . 997 C1BR78 . 997 C1BR79 . 997 C1BR80 . 997 C1BR81 . 997 C1BR82 . 997 C1BR84 . 997 C1BR85 . 997 C1BR88 . 997 C1BR89 . 997 C1BR90 . 997 C1BR91 . 997 C1BR92 . 997 C1BR93 . 997 C1BR95 . 997 C1BR96 . 983 C1BR97 . 983 C1BR98 . 983 C1BR99 . 983 C1BS11 . 983 C1BS12 . 983 C1BS13 . 983 C1BS22 . 867 C1BS27 . 867 C1BS29 . 639 C1BS32 . 984 C1BS33 . 984 C1BS34 . 984 C1BS35 . 984 C1BS36 . 984 C1BS37 . 265 C1BS38 . 265 C1BS39 . 265 C1BS40 . 265 C1BS44 . 265 C1BS45 . 265 C1BS52 .213, 265, 271, 333 C1BS53 1067 C1BS54 1067 C1BS55 1067 C1BS56 1067 C1BS57 1067 C1BS59 1066 C1BS60 1066 C1BS61 1066 C1BS62 1066 C1BS63 1066 C1BS65 1067 Part No. Page C1BS66 .1067 C1BS67 .1067 C1BS69 .1067 C1BS70 .1067 C1BS71 .1067 C1BS72 .1067 C1BS80 . .261 C1BS81 . .263 C1BS83 . .803 C1BS93 1068, . . . . . . . .1152 C1BS94 1068, . . . . . . . .1152 C1BS95 1068, . . . . . . . .1152 C1BS96 1068, . . . . . . . .1152 C1BS97 1068, . . . . . . . .1152 C1BS98 1068, . . . . . . . .1152 C1BS99 1068, . . . . . . . .1152 C1BT11 1069, . . . . . . . .1152 C1BT12 1069, . . . . . . . .1152 C1BT13 1069, . . . . . . . .1152 C1BT14 1069, . . . . . . . .1152 C1BT15 1069, . . . . . . . .1152 C1BT16 1069, . . . . . . . .1152 C1BT17 1069, . . . . . . . .1152 C1BT18 .1070 C1BT19 . .214 C1BT20 . .241 C1BT21 . .240 C1BT22 . .238 C1BT23 . .243 C1BT24 . .247 C1BT25 . .245 C1BT26 . .250 C1BT27 . .251 C1BT28 . .255 C1BT29 . .256 C1BT33 . .304 C1BT34 . 199, 305 C1BT35 . .308 C1BT36 . .202 C1BT37 1069, . . . . . . . .1152 C1BT38 1069, . . . . . . . .1152 C1BT39 1069, . . . . . . . .1152 C1BT40 1069, . . . . . . . .1152 C1BT41 1069, Part No. Page . . . . . . . . 1152 C1BT43 . . 300 C1BT46 1069, . . . . . . . . 1152 C1BT47 1069, . . . . . . . . 1152 C1BT48 1069, . . . . . . . . 1152 C1BT49 . . 329 C1BT50 . . 329 C1BT51 . . 329 C1BT53 . . 331 C1BT54 . . 330 C1BT56 . . 329 C1BT57 . . 329 C1BT58 . . 330 C1BT60 . . 254 C1BT61 . . 186 C1BT62 . 1203 C1BT63 . 1203 C1BT64 . 1202 C1BT65 . 1204 C1BT73 . 1198 C1BT74 . 1198 C1BT76 . 1198 C1BT77 . 1198 C1BT78 . 1198 C1BT79 . 1198 C1BT80 . 1198 C1BT82 . 1198 C1BT83 . 1198 C1BT84 . 1198 C1BT91 . 1198 C1BT92 . 1198 C1BT98 . 1198 C1BT99 . 1198 C1BU11 1198 C1BU12 1198 C1BU13 1198 C1BU14 1198 C1BU15 1198 C1BU16 1198 C1BU17 1198 C1BU19 1198 C1BU20 1198 C1BU21 1198 C1BU23 1198 C1BU24 1198 C1BU25 1198 C1BU26 1198 C1BU27 1198 C1BU28 1198 C1BU31 1198 C1BU32 1198 C1BU33 1198 C1BU34 1198 C1BU36 1198 C1BU37 1198 C1BU38 1198 C1BU42 1198 C1BU43 1198 C1BU44 1198 C1BU47 1198 Part No. Page C1BU48 C1BU49 C1BU54 C1BU55 C1BU56 C1BU57 C1BU58 C1BU59 C1BU60 C1BU61 C1BU62 C1BU63 C1BU64 C1BU65 C1BU66 C1BU67 C1BU68 C1BU69 C1BU70 C1BU71 C1BU72 C1BU73 C1BU74 C1BU75 C1BU76 C1BU77 C1BU78 C1BU79 C1BU81 C1BU82 C1BU83 C1BU84 C1BU85 C1BU86 C1BU87 C1BU88 C1BU89 C1BU90 C1BU91 C1BU92 C1BU93 C1BU94 C1BU95 C1BU96 C1BU97 C1BU99 C1BV11 C1BV12 C1BV13 C1BV14 C1BV16 C1BV17 C1BV18 C1BV19 C1BV20 C1BV25 C1BV27 C1BV32 C1BV33 C1BV34 C1BV35 C1BV36 C1BV37 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1198 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199
. 834, . 834, . 834, . 834, . 834, . . 834 . . 834 . 835, . 835, . 835, . 835, . 835, . 835, . . 835 . . 835 . . 835 . . 835 . . 835 . . 835 . . 835 . . 835 . . 835 . . 836 . . 834 . . 834 . . 834 . . 835 . . 835 . . 835 . . 835 . . 835 . . 812 . . 812 . . 812 . 834, . 834, . 834, . 834, . 834, . 834, . 1235 . . 930 . . 930 . . 934 . . 869
1315

Part No. Page C1BV38 C1BV39 C1BV40 C1BV41 C1BV42 C1BV43 C1BV44 C1BV45 C1BV46 C1BV47 C1BV48 C1BV49 C1BV50 C1BV51 C1BV53 C1BV54 C1BV55 C1BV56 C1BV57 C1BV59 C1BV62 C1BV64 C1BV67 C1BV68 C1BV69 C1BV71 C1BV72 C1BV74 C1BV77 C1BV86 C1BV95 C1BV96 C1BV97 C1BV98 C1BV99 C1BW11 C1BW12 C1BW13 C1BW14 C1BW15 C1BW16 C1BW17 C1BW18 C1BW20 C1BW22 C1BW29 C1BW31 C1BW36 C1BW37 C1BW38 C1BW39 C1BW40 C1BW41 C1BW42 C1BW43 C1BW44 C1BW45 C1BW47 C1BW48 C1BW49 C1BW50 C1BW51 C1BW52 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1199 .1204 . .841 . .841 . .841 . .841 . .310 .310 .310 .310 .328 .841 .841 .841 . .88 .144 1253 .387 .387 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 Part No. Page C1BW53 1182 C1BW54 1182 C1BW56 1182 C1BW58 1182 C1BW59 1182 C1BW61 1182 C1BW62 1182 C1BW63 1182 C1BW66 756, 1156 C1BW67 756, 1156 C1BW68 756, 1156 C1BW69 756, 1156 C1BW70 756, 1156 C1BW72 . 813 C1BW73 . 813 C1BW74 . 813 C1BW75 . 813 C1BW76 813, 1128 C1BW77 . 813 C1BW79 813, 1128 C1BW81 . 813 C1BW83 813, 1129 C1BW85 . 303 C1BW93 . 127 C1BW94 . 127 C1BW98 . 127 C1BX13 . . 988 C1BX14 . . 988 C1BX15 . . 988 C1BX16 . . 988 C1BX17 . . 988 C1BX19 . . 988 C1BX20 . . 989 C1BX22 . . 988 C1BX26 . . 988 C1BX27 . . 158 C1BX28 . . 974 C1BX29 . . 974 C1BX30 . . 973 C1BX31 . . 973 C1BX32 . . 973 C1BX34 . . 973 C1BX35 . . 973 C1BX36 . . 973 C1BX38 . . 973 C1BX41 . . 973 C1BX42 . . 973 C1BX43 . . 973 C1BX45 . . 973 C1BX46 . . 973 C1BX48 . . 973 C1BX50 . . 973 C1BX53 . . 974 C1BX57 . . 974 C1BX58 . . 974 Part No. Page C1BX59 . 974 C1BX61 . 974 C1BX62 . 974 C1BX63 . 974 C1BX66 . 982 C1BX68 . 982 C1BX69 . 983 C1BX70 . 983 C1BX71 . 983 C1BX72 . 983 C1BX73 . 966 C1BX74 . 966 C1BX76 . 966 C1BX77 . 966 C1BX79 . 127 C1BX83 . 126 C1BX87 . 127 C1BX90 . 991 C1BX91 . 991 C1BX92 . 991 C1BX94 . 991 C1BX96 . 991 C1BX97 . 991 C1BX98 . 991 C1BX99 . 991 C1BY15 . 992 C1BY17 . 991 C1BY18 . 991 C1BY25 . 401 C1BY36 . 265 C1BY42 . 321 C1BY43 . 322 C1BY44 . 322 C1BY51 . 934 C1BY55 . 387 C1BY63 . 112 C1BY64 . 112 C1BY65 . 867 C1BY66 . 867 C1BY67 . 867 C1BZ23 . 867 C1BZ27 1000, . . . . . . . . 1142 C1BZ28 1000, . . . . . . . . 1142 C1BZ29 1000, . . . . . . . . 1142 C1BZ30 1000, . . . . . . . . 1142 C1BZ31 1000, . . . . . . . . 1142 C1BZ32 1000, . . . . . . . . 1142 C1BZ33 1000, . . . . . . . . 1142 C1BZ34 1000, . . . . . . . . 1142 C1BZ35 1000, . . . . . . . . 1142 C1BZ36 . 867 C1BZ37 . 867 C1BZ38 . 867 C1BZ39 . 867 Part No. Page C1BZ40 C1BZ42 C1BZ43 C1BZ44 C1BZ45 C1BZ75 C1BZ76 C1BZ82 C1CA30 C1CA41 C1CA43 C1CA45 C1CA47 C1CA49 C1CA50 C1CA52 C1CA57 C1CA58 C1CA59 C1CA60 C1CA61 C1CA63 C1CA71 C1CA73 C1CA74 C1CA75 C1CA76 C1CA77 C1CA78 C1CA79 C1CA80 C1CA81 C1CA82 C1CA83 C1CA84 C1CA87 1130 C1CA88 1130 C1CA90 1130 C1CA91 1130 C1CA93 C1CA94 C1CA95 C1CA96 C1CA97 C1CA98 C1CA99 C1CB11 C1CB12 C1CB13 C1CB14 C1CB15 C1CB16 C1CB17 C1CB18 C1CB19 C1CB20 C1CB21 C1CB22 C1CB23 . . 867 . . 867 . . 867 . . 867 . . 349 . 1148 . 1148 . 1148 . . 387 . . 265 . . 263 . . 324 . . 271 . . 328 . . 320 . . 867 . . 268 . . 269 . . 270 . . 270 . . 269 . . 199 . 1202 . . 755 . . 755 . . 755 . . 755 . . 755 . . 755 . . 755 . . 755 . . 755 . . 755 . . 815 . . 815 . 815, . 815, . 815, . 815, . . 995 . . 995 . . 995 . . 995 . . 995 . . 995 . . 995 . . 995 . . 995 . . 995 . . 987 . . 987 . . 987 . . 987 . . 987 . . 987 . . 987 . . 987 . . 987 . . 987 Part No. Page C1CB24 . 987 C1CB25 . 878 C1CB26 . 878 C1CB28 . 878 C1CB29 . 878 C1CB30 . 878 C1CB31 . 878 C1CB32 . 878 C1CB33 . 878 C1CB36 1100, . . . . . . . . 1155 C1CB37 1100, . . . . . . . . 1155 C1CB38 1100, . . . . . . . . 1155 C1CB39 1100 C1CB40 1100, . . . . . . . . 1155 C1CB41 1100, . . . . . . . . 1155 C1CB42 1100, . . . . . . . . 1155 C1CB43 1100, . . . . . . . . 1155 C1CB44 1100, . . . . . . . . 1155 C1CB45 1100, . . . . . . . . 1155 C1CB47 1100, . . . . . . . . 1155 C1CB48 1100, . . . . . . . . 1155 C1CB49 1100, . . . . . . . . 1155 C1CB50 1100, . . . . . . . . 1155 C1CB52 1100, . . . . . . . . 1155 C1CB55 1100, . . . . . . . . 1155 C1CB56 1100, . . . . . . . . 1155 C1CB59 1100, . . . . . . . . 1155 C1CB60 1100, . . . . . . . . 1155 C1CB61 1100, . . . . . . . . 1155 C1CB62 1100, . . . . . . . . 1155 C1CB63 1100, . . . . . . . . 1155 C1CB64 . 755 C1CB65 . 755 C1CB66 . 755 C1CB67 . 755 C1CB68 . 755 C1CB70 . 127 C1CB72 . 127 C1CB74 1180 C1CB75 1180 C1CB76 . 111 C1CB82 1180 Part No. Page C1CB83 . . .97 C1CB84 . . .96 C1CB85 . . .98 C1CB87 . .118 C1CB91 . . 91, 93 C1CB92 . . .94 C1CB93 . .118 C1CC26 . .149 C1CC29 . .149 C1CC30 . . 87, 89, . . . . . .116 C1CC31 . . 87, 89, . . . . . .116 C1CC32 . . 87, 89, . . . . . .116 C1CC33 . . 87, 89, . . . . . .116 C1CC35 . . 87, 89, . . . . . .116 C1CC36 . . 87, 89, . . . . . .116 C1CC37 . . 87, 89, . . . . . .116 C1CC38 . . 87, 89 C1CC39 . .116 C1CC41 . .380 C1CC42 .1180 C1CC44 . 349, 350 C1CC52 .1180 C1CC54 . .129 C1CC63 .1180 C1CC64 . 349, 350 C1CC88 . .122 C1CC95 .1192 C1CC98 .1192 C1CC99 .1192 C1CD11 .1192 C1CD12 .1192 C1CD13 .1192 C1CD14 .1192 C1CD15 .1192 C1CD16 .1192 C1CD17 .1192 C1CD18 .1197 C1CD19 .1192 C1CD20 .1192 C1CD21 .1192 C1CD22 .1192 C1CD23 .1192 C1CD24 .1192 C1CD25 .1192 C1CD26 .1192 C1CD27 .1192 C1CD29 .1192 C1CD30 .1192 C1CD31 .1192 C1CD32 .1192 C1CD33 .1192 C1CD35 .1192 Part No. Page C1CD36 C1CD37 C1CD38 C1CD39 C1CD40 C1CD41 C1CD42 C1CD43 C1CD44 C1CD45 C1CD46 C1CD47 C1CD48 C1CD49 C1CD50 C1CD51 C1CD54 C1CD55 C1CD62 C1CD63 C1CD65 C1CD66 C1CD67 C1CD68 C1CD69 C1CD70 C1CD71 C1CD72 C1CD73 C1CD74 C1CD76 C1CD77 C1CD78 C1CD79 C1CD80 C1CD81 C1CD82 C1CD83 C1CD84 C1CD85 C1CD87 C1CD88 C1CD89 C1CD90 C1CD91 C1CD92 C1CD93 C1CD94 C1CD95 C1CD96 C1CD97 C1CD98 C1CD99 C1CE11 C1CE12 C1CE13 C1CE14 C1CE15 C1CE16 C1CE17 C1CE18 C1CE19 C1CE20 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1192 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 1193 Part No. Page C1CE21 C1CE22 C1CE23 C1CE24 C1CE25 C1CE27 C1CE28 C1CE29 C1CE30 C1CE32 C1CE33 C1CE38 C1CE39 C1CE41 C1CE49 C1CE50 C1CE51 C1CE52 C1CE53 C1CE54 C1CE55 C1CE56 C1CE57 C1CE58 C1CE59 C1CE60 C1CE61 C1CE62 C1CE63 C1CE64 C1CE65 C1CE66 C1CE67 C1CE68 C1CE69 C1CE70 C1CE71 C1CE72 C1CE73 C1CE74 C1CE75 C1CE76 C1CE77 C1CE78 C1CE79 C1CE80 C1CE81 C1CE82 C1CE83 C1CE84 C1CE86 C1CE87 C1CE88 C1CE89 C1CE90 C1CE91 C1CE92 C1CE93 C1CE95 C1CE96 C1CE97 C1CE98 C1CE99 .1193 .1193 .1193 .1193 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1197 .1194 .1194 .1194 .1194 .1194 .1197 .1194 .1194 .1194 .1194 .1194 .1197 .1194 .1194 .1194 .1197 .1194 .1194 .1194 .1197 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1194 .1195 .1195 .1195 .1195 .1195 .1195 .1195
Fluid Conveying
1316

Part No. Page C1CF11 C1CF12 C1CF13 C1CF14 C1CF15 C1CF16 C1CF17 C1CF18 C1CF19 C1CF20 C1CF21 C1CF22 C1CF23 C1CF24 C1CF25 C1CF26 C1CF27 C1CF28 C1CF29 C1CF30 C1CF31 C1CF32 C1CF33 C1CF34 C1CF39 C1CF40 C1CF41 C1CF42 C1CF43 C1CF47 C1CF52 C1CF53 C1CF54 C1CF55 C1CF57 C1CF59 C1CF60 C1CF61 C1CF62 C1CF63 C1CF65 C1CF66 C1CF67 C1CF68 C1CF69 C1CF70 C1CF71 C1CF73 C1CF74 C1CF75 C1CF76 C1CF77 C1CF78 C1CF79 C1CF80 C1CF81 C1CF82 C1CF83 C1CF84 C1CF85 C1CF86 C1CF87 C1CF88 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1195 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 .1196 Part No. Page C1CF89 . 1196 C1CF90 . 1196 C1CF91 . 1196 C1CF92 . 1196 C1CF93 . 1196 C1CF94 . 1196 C1CF95 . 1196 C1CF96 . 1196 C1CF97 . 1196 C1CF98 . 1196 C1CF99 . 1196 C1CG11 1196 C1CG12 1196 C1CG13 1196 C1CG15 1196 C1CG16 1196 C1CG17 1196 C1CG19 1196 C1CG20 1196 C1CG22 1196 C1CG25 1196 C1CG31 1196 C1CG49 1196 C1CG50 1196 C1CG51 1196 C1CG52 1196 C1CG53 1196 C1CG56 1196 C1CG57 1197 C1CG58 1197 C1CG59 1197 C1CG60 1197 C1CG61 1197 C1CG62 1197 C1CG63 1197 C1CG64 1197 C1CG65 1197 C1CG67 1197 C1CG70 1197 C1CG72 1197 C1CG83 . 338 C1CG84 . 337 C1CG87 . 336 C1CG88 . 336 C1CG90 . 338 C1CG96 . 385 C1CG97 . 385 C1CH13 . 642 C1CH14 . 645 C1CH15 . 645 C1CH18 . 840 C1CH19 . 840 C1CH20 . 840 C1CH21 . 840 C1CH22 . 840 C1CH40 1050 C1CH57 . 849 C1CH58 . 849 C1CH60 . 405 C1CH65 . 385 C1CH66 . 385 C1CH68 . 385 C1CH69 . 385 Part No. Page C1CH73 C1CH85 C1CH86 C1CH87 C1CH88 C1CH89 C1CH90 C1CH91 C1CH92 C1CH93 C1CH95 C1CH96 C1CH97 C1CH98 C1CH99 C1CJ11 C1CJ12 C1CJ13 C1CJ14 C1CJ15 C1CJ16 C1CJ17 C1CJ18 C1CJ19 C1CJ20 C1CJ23 C1CJ24 C1CJ26 C1CJ27 C1CJ28 C1CJ30 C1CJ32 C1CJ33 C1CJ87 C1CK23 C1CK31 C1CK39 C1CK50 C1CK51 C1CK59 C1CK80 C1CK81 C1CK84 C1CK92 C1CK93 C1CK97 C1CK98 C1CL30 C1CL31 C1CL32 C1CL34 C1CL36 C1CL37 C1CL38 C1CL39 C1CL40 C1CL65 C1CL72 C1CL73 C1CL80 C1CL83 C1CL85 C1CM15 . 385 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 1182 . 917 . 917 . 917 . 918 . 918 . 918 . 918 . 404 . 405 1243 . 291 . 291 . 290 . 290 1099 1099 1099 1099 1099 1099 . 381 . 381 . 652 . 375 . 379 . 378 1183 1183 1183 . 404 Part No. Page C1CM22 . 406 C1CM26 . 173 C1CM28 . 865 C1CM32 . 653 C1CM36 . 173 C1CN23 . . 404 C1CN24 . . 399 C1CN26 . . 643 C1CN27 . . 643 C1CN28 . 643, 645, . . . . . 648 C1CN29 . 643, 645, . . . . . 648 C1CN37 . . 404 C1CN38 . . 175 C1CN39 . . 175 C1CN40 . . 175 C1CN43 . 643, 646, . . . . . 648 C1CN44 . . 666 C1CN46 . . 666 C1CN66 . . 121 C1CN68 . . 121 C1CN69 . . 120 C1CN70 . . 120 C1CN74 . 1239 C1CN75 . 1240 C1CN79 . . 640 C1CN80 . . 640 C1CN84 . . 640 C1CN87 . 1241 C1CN88 . . 174 C1CN89 . . 174 C1CN90 . . 174 C1CN92 . . 174 C1CN93 . . 174 C1CN94 . . 174 C1CN95 . . 174 C1CN96 . . 174 C1CN97 . . 174 C1CN98 . . 174 C1CN99 . . 280 C1CP11 . . 280 C1CP12 . . 280 C1CP13 . . 280 C1CP14 . . 280 C1CP15 . . 280 C1CP16 . . 280 C1CP17 . . 280 C1CP18 . . 280 C1CP20 . . 397 C1CP21 . . 295 C1CP22 . . 295 C1CP23 . . 295 C1CP24 . . 295 C1CP25 . . 295 C1CP26 . . 295 C1CP27 . . 295 C1CP28 . . 295 C1CP29 . . 295 C1CP30 . . 295 C1CP31 . . 282 C1CP32 . . 282 Part No. Page C1CP34 C1CP37 C1CP38 C1CP39 C1CP46 C1CP47 C1CP48 C1CP50 C1CP52 C1CP54 C1CP58 C1CP59 C1CP60 C1CP61 C1CP62 C1CP63 C1CP64 C1CP66 C1CP67 C1CP68 C1CP69 C1CP70 C1CP75 C1CP76 C1CP77 C1CP78 C1CP79 C1CP80 C1CP81 C1CP82 C1CP83 C1CP84 C1CP85 C1CP86 C1CP87 C1CP88 C1CP89 C1CP91 C1CP92 C1CP93 C1CP94 C1CP95 C1CQ12 C1CQ13 C1CQ14 C1CQ15 C1CQ16 C1CQ17 C1CQ18 C1CQ19 C1CQ20 C1CQ21 C1CQ22 C1CQ23 C1CQ24 C1CQ25 C1CQ26 C1CQ27 C1CQ28 C1CQ29 C1CQ30 C1CQ31 C1CQ32 . 279 1227 . 279 . 279 . 279 . 279 1227 . 279 1227 1227 1116 1116 1116 1116 1116 1116 1116 1154 1154 1154 1154 1154 1120 1120 1120 1120 1120 1120 1120 1122 1124 1124 1124 1124 1124 1124 1124 1125 1125 1125 1125 1125 1126 1126 1126 1126 1126 1126 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1137 1138 1138 1138 1138 Part No. Page C1CQ34 C1CQ35 C1CQ36 C1CQ37 C1CQ38 C1CQ39 C1CQ40 C1CQ41 C1CQ42 C1CQ43 C1CQ44 C1CQ45 C1CQ46 C1CQ47 C1CQ48 C1CQ49 C1CQ50 C1CQ51 C1CQ52 C1CQ53 C1CQ54 C1CQ55 C1CQ56 C1CQ57 C1CQ59 C1CQ60 C1CQ61 C1CQ62 C1CQ63 C1CQ64 C1CQ65 C1CQ66 C1CQ67 C1CQ68 C1CQ69 C1CQ70 C1CQ71 C1CQ72 C1CQ73 C1CQ74 C1CQ75 C1CQ76 C1CQ77 C1CQ78 C1CQ79 C1CQ80 C1CQ81 C1CQ82 C1CQ83 C1CQ85 C1CQ87 C1CQ90 C1CQ91 C1CQ92 C1CQ94 C1CQ95 C1CQ96 C1CQ97 C1CR11 C1CR12 C1CR14 C1CR20 C1CR21 .1138 .1138 .1138 .1138 .1138 .1138 .1138 .1138 .1138 .1132 .1132 .1132 .1132 .1132 .1133 .1133 .1133 .1136 .1136 .1136 .1136 .1136 .1136 .1136 .1137 .1137 .1137 .1137 .1137 .1147 .1146 .1139 .1132 .1132 .1132 .1132 .1120 .1120 .1120 .1120 .1121 .1121 .1121 .1121 .1121 .1154 . .287 . .287 . .287 . .287 . .287 . .381 . .381 . .381 . .381 . .381 . .381 . .381 . .381 . .381 . .708 . .733 . .733 Part No. Page C1CR22 C1CR23 C1CR24 C1CR25 C1CR38 C1CR40 C1CR41 C1CR42 C1CR44 C1CR45 C1CR46 C1CR47 1119 C1CR48 1119 C1CR49 1119 C1CR50 1119 C1CR51 C1CR52 C1CR53 C1CR54 C1CR65 C1CR66 1117 C1CR67 1117 C1CR68 1117 C1CR69 1117 C1CR70 1117 C1CR71 C1CR72 C1CR73 C1CR74 C1CR75 C1CR76 C1CR77 C1CR78 C1CR79 C1CR80 C1CR81 C1CR83 C1CR84 C1CR85 C1CR86 C1CR87 C1CR88 C1CR89 C1CR94 C1CS14 C1CS52 C1CS55 C1CS67 C1CS72 C1CS75 1125 C1CS76 1125 C1CS77 . 733 . 733 . 733 . 733 . 879 . 879 . 879 . 879 . 879 . 703 . 703 703, 703, 703, 703, . 703 . 703 . 703 . 703 . 742 721, 721, 721, 721, 721, . 825 . 798 . 825 . 798 . 798 . 739 . 739 . 739 . 739 . 739 . 739 . 825 . 798 . 825 . 798 . 798 . 798 . 798 . 713 . 715 . 793 . 793 . 793 . 793 810, 810, 810, Part No. Page 1125 C1CS79 . .810 C1CS85 . .808 C1CS86 . .808 C1CS88 . .808 C1CS89 . .808 C1CS91 . .808 C1CS92 . .808 C1CS93 . .808 C1CS94 . .711 C1CS95 . .711 C1CS96 . .711 C1CS97 . .709 C1CS98 . .709 C1CS99 . .709 C1CT25 . .805 C1CT27 . .806 C1CT28 . .806 C1CT29 . .806 C1CT30 . .806 C1CT36 . .825 C1CT37 . .798 C1CT38 . .798 C1CT39 . .798 C1CT40 . .825 C1CT41 . .798 C1CT42 . .798 C1CT47 . 815, 1129 C1CT48 . 815, 1129 C1CT49 . 815, 1129 C1CT50 . .288 C1CT51 . .288 C1CT52 . .288 C1CT58 .1059 C1CT60 .1060 C1CT61 .1060 C1CT62 .1060 C1CT64 .1062 C1CT66 .1063 C1CT90 .1073 C1CT93 .1073 C1CT97 .1073 C1CT98 .1073 C1CU13 .1074 C1CU20 .1074 C1CU32 .1082 C1CU33 .1082 C1CU34 .1079 C1CU35 .1080 C1CU36 1084, . . . . . . . .1151 C1CU37 1083, . . 1151, 1153 C1CU38 1083, . . . . . . . .1151 C1CU39 1083, . . . . . . . .1151 C1CU40 1084, . . . . . . . .1151 C1CU41 1083,
1317

Part No. Page . . . . . . . .1151 C1CU43 .1025 C1CU44 .1025 C1CU45 .1025 C1CU46 .1025 C1CU49 .1070 C1CU56 . .994 C1CU57 . .994 C1CU58 . .994 C1CU59 . .994 C1CU60 . .995 C1CU61 . .977 C1CU62 . .977 C1CU64 . .942 C1CU65 . .942 C1CU66 . .942 C1CU67 . .942 C1CU68 . .942 C1CU69 . .942 C1CU70 . .942 C1CU71 . .942 C1CU73 . .942 C1CU74 . .942 C1CU75 . .942 C1CU76 . .942 C1CU79 . .943 C1CU80 . .943 C1CU83 . .943 C1CU84 . .943 C1CU85 . .943 C1CU86 . .943 C1CU87 . .943 C1CU88 . .943 C1CU89 . .943 C1CU90 . .943 C1CU91 . .943 C1CU92 . .943 C1CU93 .1002 C1CU95 . .947 C1CU96 . .947 C1CU98 . .945 C1CU99 . .945 C1CV11 . .945 C1CV12 . .945 C1CV14 . .945 C1CV15 . .945 C1CV16 . .948 C1CV17 . .948 C1CV18 . .948 C1CV19 . .948 C1CV21 . .995 C1CV23 . .995 C1CV24 . .995 C1CV25 . .995 C1CV26 . .995 C1CV27 . .998 C1CV28 . .983 C1CV29 . .983 C1CV30 . .983 C1CV31 . .983 C1CV32 . .983 C1CV35 . .998 C1CV36 . .998 Part No. Page C1CV37 C1CV38 C1CV39 C1CV41 C1CV44 C1CV45 C1CV48 C1CV49 C1CV50 C1CV51 C1CV52 C1CV53 C1CV54 C1CV55 C1CV56 C1CV57 C1CV58 C1CV59 C1CV60 C1CV61 C1CV62 C1CV63 C1CV64 C1CV65 C1CV66 C1CV67 C1CV68 C1CV69 C1CV70 C1CV71 C1CV72 C1CV73 C1CV74 C1CV75 C1CV76 C1CV77 C1CV78 C1CV79 C1CV80 C1CV81 C1CV82 C1CV83 C1CV84 C1CV85 C1CV86 C1CV87 C1CV88 C1CV89 C1CV90 C1CV91 C1CV99 C1CW14 C1CW20 C1CW23 C1CW26 C1CW27 C1CW34 C1CW35 C1CW50 C1CW56 C1CW67 C1CW68 C1CW69 . 998 . 998 . 998 1097 1097 . 882 . 882 . 882 1098 1098 1098 1098 1098 1098 1098 1098 1098 1098 1098 1098 1098 . 879 . 879 . 879 . 879 . 879 . 879 . 879 . 949 . 949 . 949 . 949 . 949 . 949 . 949 . 949 . 949 . 949 . 949 . 949 1025 1025 1025 1025 1025 1025 1025 . 809 . 809 . 809 . 810 . 790 . 790 . 790 . 790 . 790 . 790 . 790 . 790 . 804 1026 1026 1026 Part No. Page C1CW72 C1CW78 1158 C1CW93 C1CW95 C1CW96 C1CW97 C1CW98 C1CX14 C1CX25 C1CX31 C1CX35 C1CX36 C1CX37 C1CX38 C1CX39 C1CX40 C1CX41 C1CX42 C1CX43 C1CX44 C1CX45 C1CX46 C1CX47 C1CX48 C1CX49 C1CX50 C1CX51 C1CX52 C1CX53 C1CX54 C1CX55 C1CX56 C1CX57 C1CX58 C1CX59 C1CX60 C1CX61 C1CX62 C1CX63 C1CX64 C1CX65 C1CX66 C1CX67 C1CX68 C1CX69 C1CX70 C1CX73 C1CX74 C1CX75 C1CX76 C1CX77 C1CX78 C1CX79 C1CX84 C1CX86 C1CX88 C1CY21 C1CY22 C1CY24 C1CY27 C1CY28 C1CY29 1112 . 754, . 753 . 753 . 753 . 753 . 753 . 753 . 383 . 405 . 708 . 708 . 708 . 708 . 708 . 708 . 709 . 709 . 709 . 710 . 710 . 710 . 709 . 709 . 702 . 702 . 702 . 701 . 701 . 701 . 701 . 701 . 701 . 705 . 705 . 705 . 706 . 705 . 705 . 705 . 705 . 705 . 705 . 707 . 707 . 707 . 707 . 707 . 707 . 707 . 707 . 707 . 782 1036 1036 1251 . 829 . 829 . 829 1024 1024 1024 Part No. Page C1CY30 C1CY31 C1CY32 C1CY33 C1CY34 C1CY39 C1CY40 C1CY42 C1CY44 C1CY45 C1CY47 C1CY48 C1CY49 C1CY50 C1CY53 C1CY54 C1CY55 C1CY56 C1CY58 C1CY59 C1CY60 C1CY61 C1CY65 C1CY66 C1CY68 C1CY69 C1CY70 C1CY71 C1CY72 C1CY73 C1CY74 C1CY75 C1CY76 C1CY77 C1CY78 C1CY79 C1CY81 C1CY82 C1CY83 C1CY84 C1CY90 C1CY97 C1CY98 C1CY99 C1CZ11 C1CZ12 C1CZ13 C1CZ15 C1CZ16 C1CZ17 C1CZ18 C1CZ19 C1CZ20 C1CZ22 C1CZ23 C1CZ25 C1CZ26 C1CZ27 C1CZ28 C1CZ30 C1CZ31 C1CZ32 C1CZ33 . 1024 . 1024 . 1024 . . 403 . . 403 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . . 758 . . 758 . . 758 . 1179 . 1234 . 1224 . . 758 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . . 855 . 1206 . 1030 . 1030 . 1030 . 1027 . 1028 . 1033 . 1028 . . 894 . 1036 . . 894 . 1031 . 1032 . 1030 . 1036 . 1027 . 1030 . 1030 . 1027 . 1028 . 1033 . 1033 . 1028 Part No. Page C1CZ34 C1CZ35 C1CZ37 C1CZ38 C1CZ39 C1CZ41 C1CZ43 C1CZ45 C1CZ46 C1CZ47 C1CZ49 C1CZ50 C1CZ52 C1CZ53 C1CZ65 C1CZ67 C1CZ68 C1CZ70 C1CZ71 C1CZ72 C1CZ73 C1CZ74 C1CZ75 C1CZ76 C1CZ77 C1CZ78 C1CZ79 C1CZ81 C1CZ82 C1CZ83 C1CZ84 C1CZ86 C1CZ87 C1CZ88 C1CZ90 C1CZ91 C1CZ92 C1CZ93 C1CZ94 C1CZ96 C1CZ97 C1CZ98 C1CZ99 C1DA12 C1DA13 C1DA17 C1DA19 C1DA20 C1DA21 C1DA22 C1DA23 C1DA25 C1DA26 C1DA27 C1DA29 C1DA30 C1DA31 C1DA32 C1DA33 C1DA34 C1DA35 C1DA36 C1DA37 1028 . 894 . 894 1031 1032 1030 1030 1027 1028 1033 1028 . 894 . 894 1030 1027 . 894 . 894 1029 1027 1027 1028 1028 1028 1028 1027 1033 1027 1030 1027 1031 1028 1033 1033 1033 1028 1028 . 894 1036 . 894 1031 1030 1032 1031 1030 1036 . 894 . 894 1030 1036 1027 1030 1027 1028 1028 1027 1033 1033 1030 1027 1031 1028 1028 1033 Part No. Page C1DA38 C1DA39 C1DA41 C1DA42 C1DA43 C1DA44 C1DA45 C1DA47 C1DA48 C1DA49 C1DA50 C1DA53 C1DA54 C1DA55 C1DA56 C1DA57 C1DA58 C1DA61 C1DA62 C1DA63 C1DA64 C1DA65 C1DA66 C1DA67 C1DA68 C1DA69 C1DA70 C1DA71 C1DA72 C1DA73 C1DA77 C1DA78 C1DA79 C1DA80 C1DA81 C1DA82 C1DA83 C1DA84 C1DA85 C1DA86 C1DA87 C1DA88 C1DA92 C1DA93 C1DA94 C1DA95 C1DA96 C1DA97 C1DA98 C1DA99 C1DB11 C1DB12 C1DB13 C1DB14 C1DB15 C1DB16 C1DB17 C1DB18 C1DB19 C1DB20 C1DB21 C1DB23 C1DB24 .1033 .1033 .1028 .1028 . .894 .1036 . .894 .1031 .1030 .1032 .1031 .1030 .1036 .1027 .1027 .1030 .1033 .1030 .1029 .1027 .1027 .1028 .1028 .1030 .1027 .1031 .1028 .1028 .1033 .1033 .1028 . .894 .1036 . .894 .1031 .1031 .1030 .1032 .1031 .1029 .1030 .1036 .1008 .1009 .1008 .1009 .1008 .1019 .1008 .1009 .1008 .1009 .1008 .1008 .1009 .1008 .1009 .1019 .1008 .1009 .1008 .1008 .1009 Part No. Page C1DB25 C1DB26 C1DB27 C1DB37 C1DB38 C1DB39 C1DB40 C1DB41 C1DB42 C1DB43 C1DB44 C1DB45 C1DB46 C1DB47 C1DB48 C1DB49 C1DB50 C1DB51 C1DB52 C1DB53 C1DB54 C1DB56 C1DB57 C1DB58 C1DB59 C1DB60 C1DB61 C1DB62 C1DB63 C1DB64 C1DB67 C1DB68 C1DB69 C1DC94 C1DC95 C1DC96 C1DC98 C1DC99 C1DD11 C1DD13 C1DD14 C1DD16 C1DD18 C1DD30 C1DD55 C1DD58 C1DD75 C1DD76 C1DD77 C1DD79 C1DD80 C1DD81 C1DD82 C1DD84 C1DD85 C1DD86 C1DD87 C1DD88 C1DD89 C1DD90 C1DD91 C1DD92 C1DD94 1008 1008 1008 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 1004 . 864 . 864 . 864 1005 1005 1005 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 . 384 . 394 . 148 . 855 . 855 . 855 1183 1183 1183 1183 1183 1183 1183 1183 1183 1183 1183 1183 1183 1183 Part No. Page C1DD95 C1DD96 C1DD97 C1DD99 C1DE12 C1DE14 C1DE15 C1DE16 C1DE17 C1DE18 C1DE19 C1DE20 C1DE24 C1DE34 C1DE36 C1DE37 C1DE38 C1DE39 C1DE44 C1DE57 C1DE62 C1DE69 C1DE77 C1DE78 C1DE79 C1DE80 C1DE81 C1DE82 C1DE84 C1DE85 C1DE87 C1DE88 C1DE98 C1DF12 C1DF13 C1DF16 C1DF17 C1DF18 C1DF55 C1DF56 C1DF57 C1DF59 C1DF61 C1DF67 C1DF68 C1DF69 C1DF70 C1DF71 C1DF73 C1DF75 C1DF76 C1DF77 C1DF78 C1DG11 C1DG32 C1DG34 C1DG35 C1DG61 C1DG67 C1DG68 C1DG69 C1DG70 C1DG71 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1183 .1204 .1204 .1203 .1025 .1025 .1024 .1025 .1025 . .396 . .396 . .845 . .845 . .845 .1024 .1024 .1024 . .296 . .296 . .296 . .294 . .294 .1234 . .828 . .937 . .937 . .937 . .937 . .938 . .938 . .938 . .827 . .380 . .392 . .392 . .652 . .412 .1011 .1018 .1011 .1011 .1018
Fluid Conveying
1318

Part No. Page C1DG72 C1DG73 C1DG74 C1DG75 C1DG76 C1DG78 C1DG79 C1DG80 C1DG81 C1DG84 C1DG85 C1DG86 C1DG87 C1DG88 C1DG89 C1DG90 C1DG91 C1DG92 C1DG93 C1DG94 147 C1DG95 147 C1DG96 147 C1DG97 147 C1DG98 147 C1DG99 147 C1DH11 147 C1DH22 C1DH30 C1DH31 C1DH32 C1DH33 C1DH34 C1DH35 C1DH42 C1DH43 C1DH44 C1DH45 C1DH47 C1DH48 C1DH49 C1DH50 C1DH51 C1DH52 C1DH53 C1DH54 C1DH56 C1DH57 C1DH60 C1DH63 C1DH64 C1DH65 C1DH66 C1DH67 C1DH68 C1DH69 C1DH70 .1011 .1018 .1011 .1018 .1011 .1011 .1011 . .126 . .126 . .872 . .872 . .872 . .872 . .872 . .872 . .872 . .872 . .872 .1238 . 106, . 106, . 107, . 107, . 107, . 107, . 107, .1207 .1006 .1006 . .851 . .398 . .400 . .400 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1186 .1187 .1187 .1187 .1187 .1187 .1187 .1187 .1187 Part No. Page C1DH71 C1DH73 C1DH74 C1DH75 C1DH76 C1DH77 C1DH78 C1DH80 C1DH81 C1DH82 C1DH83 C1DH84 C1DH86 C1DH87 C1DH89 C1DH92 C1DH96 C1DH98 C1DJ11 C1DJ12 C1DJ15 C1DJ18 C1DJ19 C1DJ20 C1DJ21 C1DJ22 C1DJ23 C1DJ24 C1DJ25 C1DJ32 C1DJ66 C1DJ67 C1DJ69 C1DJ87 C1DK11 C1DK12 C1DK13 C1DK14 C1DK15 C1DK16 C1DK17 C1DK18 C1DK19 C1DK20 C1DK23 C1DK32 C1DK33 C1DK63 C1DK64 C1DK69 C1DK72 C1DK84 C1DK86 C1DK87 C1DK90 146 C1DK99 C1DL12 C1DL23 C1DL24 C1DL25 C1DL26 C1DL27 1187 1188 1188 1188 1188 1188 1188 1188 1188 1188 1188 1188 1188 1188 1189 1189 1189 1189 . 1189 . 1189 . 1189 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1023 . 1202 . 1024 . 1024 . 1024 . . 200 . 131 . 158 . 158 . 158 . 158 . 158 . 158 . 159 . 159 . 159 . 302 . 845 1149 1223 1223 . 159 . 746 . 211 1230 1230 103, 1181 . 1181 . . 843 . 1184 . 1184 . 1184 . 1184 Part No. Page C1DL28 C1DL30 C1DL31 C1DL32 C1DL33 C1DL35 C1DL36 C1DL37 C1DL40 C1DL41 C1DL43 C1DL44 C1DL46 C1DL48 C1DL49 C1DL51 C1DL53 C1DL54 C1DL55 C1DL56 C1DL57 C1DL58 C1DL59 C1DL89 C1DL90 C1DL91 C1DL92 C1DL93 C1DL94 C1DL95 C1DL96 C1DL97 C1DL98 C1DL99 C1DM11 C1DM12 C1DM13 C1DM14 C1DM15 C1DM16 C1DM17 C1DM18 C1DM19 C1DM20 C1DM23 C1DM26 C1DM28 C1DM29 C1DM30 C1DM32 C1DM33 C1DM34 C1DM36 C1DM38 C1DM39 C1DM40 C1DM41 C1DM42 C1DM44 C1DM52 C1DM55 C1DM68 C1DM69 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1184 1235 1235 1235 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 . 859 1225 1180 1180 1180 1180 1180 1180 1180 1180 1180 1180 1180 1223 1223 1181 1181 1181 . 381 . 381 Part No. Page C1DM70 1177 C1DM71 1177 C1DM72 1177 C1DM73 1177 C1DM74 1177 C1DM75 1177 C1DM76 1177 C1DM77 1177 C1DM78 1177 C1DM79 1177 C1DM80 1177 C1DM81 1177 C1DM82 1177 C1DM83 1177 C1DM84 1177 C1DM85 1177 C1DM86 1177 C1DM87 1177 C1DM88 1177 C1DM89 1177 C1DM90 1177 C1DM91 1177 C1DM92 1177 C1DM93 1177 C1DM94 1177 C1DM95 1177 C1DM96 1177 C1DM97 1177 C1DM98 1177 C1DM99 1177 C1DN11 . 1177 C1DN13 . 1177 C1DN14 . 1177 C1DN15 . 1177 C1DN16 . 1177 C1DN17 . 1177 C1DN19 . 1177 C1DN20 . 1177 C1DN21 . 1177 C1DN22 . 1177 C1DN23 . 1177 C1DN24 . 1177 C1DN26 . 1177 C1DN27 . 1177 C1DN28 . 1177 C1DN29 . 1177 C1DN30 . 1177 C1DN31 . 1177 C1DN32 . 1177 C1DN33 . 1177 C1DN34 . 1177 C1DN35 . 1177 C1DN36 . 1177 C1DN37 . 1177 C1DN38 . 1177 C1DN39 . 1177 C1DN40 . 1177 C1DN41 . 1177 C1DN42 . 1177 C1DN43 . 1177 C1DN44 . 1177 C1DN45 . 1177 C1DN46 . 1177 Part No. Page C1DN47 C1DN48 C1DN49 C1DN50 C1DN51 C1DN52 C1DN53 C1DN54 C1DN55 C1DN56 C1DN57 C1DN58 C1DN59 C1DN60 C1DN61 C1DN62 C1DN63 C1DN64 C1DN65 C1DN67 C1DN68 C1DN69 C1DN70 C1DN71 C1DN72 C1DN73 C1DN74 C1DN75 C1DN76 C1DN77 C1DN78 C1DN79 C1DN80 C1DN81 C1DN82 C1DN86 C1DN88 C1DN89 C1DN92 C1DN94 C1DN96 C1DN97 C1DN98 C1DN99 C1DP11 C1DP12 C1DP13 C1DP14 C1DP15 C1DP16 C1DP17 C1DP18 C1DP19 C1DP20 C1DP22 C1DP23 C1DP25 C1DP26 C1DP27 C1DP28 C1DP30 C1DP31 C1DP32 1177 1177 1177 1177 1177 1177 1177 1177 1178 1178 1178 1177 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 1178 Part No. Page C1DP34 C1DP35 C1DP37 C1DP39 C1DP40 C1DP41 C1DP42 C1DP43 C1DP46 C1DP48 C1DP49 C1DP50 C1DP52 C1DP53 C1DP54 C1DP55 C1DP56 C1DP60 C1DP61 C1DP63 C1DP64 C1DP65 C1DP67 C1DP68 C1DP69 C1DP73 C1DP74 C1DP75 C1DP85 C1DP87 C1DP88 C1DP89 C1DP90 C1DP91 C1DP92 C1DP97 C1DP98 C1DP99 C1DQ11 C1DQ14 C1DQ15 C1DQ16 C1DQ17 C1DQ19 C1DQ20 C1DQ21 C1DQ26 C1DQ32 C1DQ35 C1DQ40 C1DQ45 C1DQ51 C1DQ54 C1DQ56 C1DQ58 C1DQ60 C1DQ64 C1DQ66 C1DQ67 C1DQ68 C1DQ69 C1DQ70 C1DQ77 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1178 .1179 .1179 .1179 .1179 .1179 .1179 .1179 .1179 .1179 .1179 .1179 .1179 .1179 .1179 Part No. Page C1DQ78 1179 C1DQ80 1179 C1DQ81 1179 C1DQ82 1179 C1DR58 . 122 C1DR61 1200 C1DR63 1179 C1DR64 1179 C1DR66 1179 C1DR68 1179 C1DR69 1179 C1DR70 1179 C1DR71 1179 C1DR72 1179 C1DR73 1179 C1DR74 1179 C1DR77 1179 C1DR78 1179 C1DR79 1179 C1DR83 1179 C1DR84 1179 C1DR85 1179 C1DR87 1179 C1DR88 1179 C1DR89 1179 C1DR90 1179 C1DR91 1179 C1DR94 1179 C1DR95 1179 C1DR96 1179 C1DR97 1180 C1DS12 1180 C1DS16 1180 C1DS17 1180 C1DS19 1180 C1DS20 1180 C1DS21 1180 C1DS22 1180 C1DS24 1180 C1DS25 1180 C1DS27 1180 C1DS28 1180 C1DS31 1180 C1DS33 1180 C1DS34 1180 C1DS36 1180 C1DS40 1180 C1DS42 1180 C1DS44 1180 C1DS69 1088 C1DS78 1085 C1DS79 1085 C1DT15 1087 C1DT16 1087 C1DT17 1087 C1DT49 . 670 C1DT58 1200 C1DT74 . 127 C1DU27 . 94, 96, . . . . . 116 C1DU37 . 182 C1DU44 . 986 C1DU45 . 986 Part No. Page C1DU48 C1DU49 C1DU50 C1DU54 C1DU55 C1DU56 C1DU57 C1DU58 C1DU61 C1DU68 C1DU69 C1DU70 C1DU72 C1DU75 C1DU77 C1DU78 C1DU80 C1DU82 C1DU85 C1DU86 C1DU97 C1DV20 C1DV23 C1DV24 C1DV32 C1DV35 C1DV39 C1DV40 C1DV42 C1DV43 C1DV45 C1DV46 C1DV48 C1DV49 C1DV50 C1DV51 C1DV53 C1DV54 C1DV55 C1DV56 C1DV57 C1DV61 C1DV62 C1DV63 C1DV67 C1DV69 C1DV70 C1DV72 C1DV73 C1DV75 C1DV77 C1DV78 C1DV82 C1DV84 C1DV86 C1DV87 C1DV92 C1DV94 C1DV98 C1DW11 C1DW25 C1DW30 C1DW37 .1094 .1094 . .933 . .891 . .891 . .891 . .891 . .891 . .891 . .369 . .369 . .369 . .369 . .369 . .954 . .954 . .954 . .957 . .957 . .957 . .958 . .955 . .955 . .955 .1007 .1017 . .814 . .814 .1015 .1015 .1015 .1015 . .777 .1044 . .966 . .966 . .970 . .970 . .970 . .970 . .971 . .982 . .982 . .952 . .967 . .954 . .958 . .975 . .975 . .986 . .964 . .965 . .990 .1041 . .979 . .979 . .980 . .980 . .987 .982 .970 .970 .967
1319

Part No. Page C1DW38 .967 C1DW47 .971 C1DW48 .971 C1DW49 .971 C1DW53 .971 C1DW54 .971 C1DW56 .971 C1DW57 .971 C1DW59 .971 C1DW63 .971 C1DW67 .971 C1DW68 .971 C1DW69 .971 C1DW74 .982 C1DW76 .981 C1DW77 .981 C1DW79 .964 C1DW80 .964 C1DW81 .964 C1DW83 .964 C1DW84 .964 C1DW85 .964 C1DW94 1094 C1DW95 . . . . 1094, . . .1148 C1DW96 . . . . 1094, . . .1148 C1DW97 . . . . 1094, . . .1148 C1DW98 . . . . 1094, . . .1148 C1DW99 . . . . 1094, . . .1148 C1DX11 .1094 C1DX12 1094, . . . . . . . .1148 C1DX13 .1094 C1DX14 .1094 C1DX15 .1094 C1DX16 .1094 C1DX17 .1094 C1DX18 .1094 C1DX19 .1094 C1DX20 .1094 C1DX21 . .833 C1DX22 . .833 C1DX23 . . .97 C1DX24 . . .97 C1DX28 . .977 C1DX30 . .977 C1DX32 . .977 C1DX33 . .977 C1DX34 . .977 C1DX35 . .977 C1DX36 . .977 C1DX38 . .977 C1DX39 . .977 C1DX40 . .977 C1DX41 . .977 C1DX43 . .977 C1DX51 .1016 C1DX52 .1016 C1DX53 .1016 Part No. Page C1DX54 C1DX61 C1DX63 C1DX65 C1DX66 C1DX67 C1DX68 C1DX69 C1DX71 C1DX72 C1DX74 C1DX76 C1DX77 C1DX78 C1DX79 C1DX81 C1DX82 C1DX88 C1DX89 C1DX95 C1DX99 C1DY14 C1DY29 C1DY34 C1DY35 C1DY36 C1DY37 C1DY38 C1DY40 C1DY41 C1DY42 C1DY44 C1DY45 C1DY51 C1DY60 C1DY61 C1DY62 C1DY64 C1DY65 C1DY66 C1DY68 C1DY69 C1DY70 C1DY71 C1DY72 C1DY73 C1DY76 C1DY79 C1DY82 C1DY83 C1DY87 C1DY90 C1DY99 C1DZ11 C1DZ12 C1DZ15 C1DZ16 C1DZ20 C1DZ22 C1DZ24 C1DZ25 C1DZ26 C1DZ27 1016 . 328 . 950 . 952 . 952 . 952 . 952 . 952 . 952 . 952 . 951 . 951 . 956 . 956 . 956 . 957 . 958 . 958 . 958 . 111 . 974 . 974 . 973 . 994 . 994 . 994 . 994 . 994 . 994 . 994 . 994 . 994 . 994 . 995 . 995 . 995 . 995 . 970 . 970 . 970 . 966 . 966 . 966 . 966 . 965 . 965 . 985 1107 . 990 . 990 . 990 . 990 . 975 . . 975 . . 975 . . 975 . . 975 . . 975 . . 976 . . 976 . . 976 . . 976 . . 976 Part No. Page C1DZ28 C1DZ29 C1DZ32 C1DZ39 C1DZ40 C1DZ42 C1DZ43 C1DZ45 C1DZ47 C1DZ49 C1DZ55 C1DZ56 C1DZ61 C1DZ63 C1DZ70 C1DZ81 C1DZ85 C1DZ89 C1DZ90 C1DZ91 C1DZ94 C1EA14 C1EA43 C1EA44 C1EA45 C1EA46 C1EA50 C1EA55 C1EA57 C1EA60 C1EA61 C1EA62 1128 C1EA63 1128 C1EA64 1129 C1EA65 1129 C1EA67 C1EA68 C1EA69 C1EA70 C1EA71 C1EA73 C1EA74 C1EA75 C1EA76 C1EA77 C1EA78 C1EA79 C1EA80 C1EA82 C1EA84 C1EA86 C1EA87 C1EA88 C1EA89 C1EA90 C1EA91 C1EA93 C1EA94 C1EA96 . 976 . 976 . 976 . 993 . 993 . 993 . 993 . 993 . 991 . 991 . 973 . 973 . 973 . 973 . 975 1107 1107 . 320 . 319 . 271 . 118 1107 1017 1017 1017 1017 1121 1122 1120 1122 1122 . 830, . 830, . 830, . 830, 1137 1137 1138 1138 1138 1133 1133 1132 1133 1133 1133 1136 1136 1137 1146 1146 1146 1146 1134 1134 1139 1139 1140 1140 Part No. Page C1EA97 C1EA98 C1EB11 C1EB12 C1EB13 C1EB14 C1EB15 C1EB16 C1EB18 C1EB19 C1EB20 C1EB21 C1EB23 C1EB24 C1EB25 C1EB26 C1EB27 C1EB28 C1EB29 C1EB30 C1EB31 C1EB33 C1EB34 C1EB35 C1EB37 C1EB38 C1EB39 C1EB40 C1EB41 C1EB42 C1EB44 C1EB46 C1EB47 C1EB48 C1EB52 C1EB55 C1EB56 C1EB57 C1EB58 C1EB59 C1EB60 C1EB62 C1EB63 C1EB64 C1EB66 C1EB69 C1EB70 C1EB72 C1EB73 C1EB74 C1EB76 C1EB78 C1EB80 C1EB81 C1EB82 C1EB84 C1EB85 C1EB86 C1EB87 C1EB89 1130 C1EB90 1130 . 1140 . 1140 . 1140 . 1141 . 1141 . 1141 . 1141 . 1141 . 1141 . 1141 . 1141 . 1141 . 1141 . 1141 . 1141 . 1133 . 1133 . 1133 . 1133 . 1133 . 1133 . 1147 . 1147 . 1147 . 1147 . 1147 . 1147 . 1134 . 1134 . 1146 . 1139 . 1136 . 1136 . 1136 . 1143 . 1144 . 1144 . 1145 . 1143 . 1143 . 1143 . 1143 . 1143 . 1143 . 1143 . 1143 . 1143 . 1144 . 1144 . 1144 . 1144 . 1144 . 1144 . 1144 . 1144 . 1133 . 1133 . 1133 . 1133 . 814, . 814, Part No. Page C1EB91 C1EB92 C1EB93 C1EB94 C1EB96 C1EB97 C1EB98 C1EB99 C1EC11 C1EC13 C1EC14 C1EC15 C1EC16 C1EC19 C1EC20 C1EC23 C1EC24 C1EC25 C1EC26 C1EC27 C1EC28 C1EC29 C1EC30 C1EC32 C1EC33 C1EC36 C1EC37 C1EC38 C1EC40 C1EC41 C1EC42 C1EC43 C1EC44 C1EC45 C1EC47 C1EC48 C1EC49 C1EC50 C1EC51 C1EC52 C1EC53 C1EC54 C1EC55 C1EC57 C1EC58 C1EC59 C1EC60 C1EC61 C1EC62 C1EC64 C1EC65 C1EC66 C1EC72 C1EC82 C1EC83 C1EC84 C1EC85 C1EC86 C1EC87 C1EC88 C1EC89 C1EC90 C1EC94 1155 1155 1155 1155 1135 1135 1137 1155 1155 1135 1135 1135 1135 1135 1135 1141 1141 1141 1141 1134 1134 1134 1134 1134 1134 1135 1135 1135 1135 1135 1135 1135 1135 1141 1135 1135 1120 1122 1122 1122 1122 1122 1122 1122 1122 1122 1122 1122 . 806 . 994 . 995 . 977 . 943 . 945 . 945 . 945 . 945 . 945 . 945 . 945 . 945 . 945 . 945 Part No. Page C1EC98 C1ED14 C1ED15 C1ED16 C1ED24 C1ED32 C1ED33 C1ED34 C1ED59 C1ED63 C1ED66 C1ED67 C1ED68 C1ED69 C1ED86 C1ED92 C1ED96 C1ED97 C1ED98 C1EE12 C1EE13 C1EE14 C1EE16 C1EE17 C1EE18 C1EE19 C1EE20 C1EE21 C1EE22 C1EE23 C1EE24 C1EE57 C1EE84 C1EE85 C1EE86 C1EE87 C1EE88 C1EE89 C1EE90 C1EE91 C1EE99 C1EF12 C1EF13 C1EF14 C1EF15 C1EF17 C1EF19 C1EF21 C1EF22 C1EF24 C1EF29 C1EF31 C1EF33 C1EF34 C1EF35 C1EF38 C1EF39 C1EF49 C1EF52 C1EF53 C1EF54 C1EF55 96 . .943 . .998 . .998 . .998 . .947 . .945 . .945 . .945 . .948 . .948 . .948 . .948 . .948 . .948 . .944 . .753 .1019 .1019 .1019 .1019 .1019 .1019 .1005 .1005 .1005 .1005 .1005 .1005 .1005 .1005 .1005 . .384 .1006 .1006 .1006 .1006 .1006 .1006 .1006 .1006 .1105 .1108 .1102 .1104 .1103 .1103 .1104 .1104 .1103 .1104 .1106 .1106 .1106 .1106 .1106 .1107 .1108 . .669 . .954 . .299 . .758 . . 94, Part No. Page C1EF56 . . 979 C1EF57 . . 967 C1EF58 . . 964 C1EF60 . . 118 C1EF61 . . 977 C1EF62 . 1016 C1EF63 . . 951 C1EF64 . . 956 C1EF77 . . 755 C1EF78 . 1017 C1EF79 . 1157 C1EF81 . . 947 C1EF82 . . 183 C1EF84 . 1102 C1EF86 . 1102 C1EF89 . 1103 C1EF90 . 1103 C1EF91 . 1108 C1EF92 . . 381 C1EG14 . 118 C1EG35 . . 94 C1EG52 . 91, 93 C1EG53 . 91, 93 C1EG54 . 91, 93 C1EG58 . . 97 C1EG59 . 871 C1EG60 . 891 C1EG61 . 891 C1EG62 . 891 C1EG63 366, 367 C1EG69 . 157 C1EG70 . . 99 C1EG72 . 94, 96 C1EG73 . 97, 118 C1EG78 . . 97 C1EG79 . . 97 C1EG80 . . 99 C1EH14 . . 86 C1EH16 . . 89 C1EH18 . . 98 C1EH19 . . 96 C1EH20 . . 96 C1EH21 . . 95 C1EH26 . . 98 C1EH28 . . 95 C1EH32 . . 97 C1EH33 . . 98 C1EH38 . 953 C1EH42 . 830 C1EH43 830, 1130 C1EH75 1099 C1EH76 . 865 C1EH81 . 745 C1EJ37 . 1096 C1EJ38 . 1096 C1EJ44 . 1095 Part No. Page C1EJ45 .1095 C1EJ46 .1095 C1EJ47 .1095 C1EJ48 .1095 C1EJ49 .1095 C1EJ50 .1095 C1EJ51 .1095 C1EJ52 .1095 C1EJ53 .1095 C1EJ54 .1096 C1EJ55 .1096 C1EJ56 .1096 C1EJ57 .1096 C1EJ59 .1096 C1EJ61 .1096 C1EJ62 .1096 C1EJ64 .1095 C1EJ65 .1095 C1EJ66 .1095 C1EJ67 .1096 C1EJ68 .1096 C1EJ69 .1096 C1EJ70 .1096 C1EJ71 .1096 C1EJ73 .1095 C1EJ74 .1095 C1EJ75 .1095 C1EJ76 .1095 C1EJ77 .1095 C1EJ78 .1095 C1EJ79 .1095 C1EJ80 .1095 C1EJ81 .1095 C1EJ85 .1096 C1EJ87 .1095 C1EJ88 .1095 C1EJ89 .1095 C1EJ90 .1095 C1EJ91 .1095 C1EJ92 .1095 C1EJ93 .1095 C1EJ94 .1095 C1EJ95 .1095 C1EK16 .1229 C1EK18 . .977 C1EK28 . .974 C1EK29 1100, . . . . . . . .1155 C1EK30 .1015 C1EK31 .1016 C1EK32 .1016 C1EK33 .1016 C1EK39 .1094 C1EK42 . .336 C1EK50 . .177 C1EK51 . .177 C1EK53 1081, . . . . . . . .1150 C1EK54 1081, . . . . . . . .1150 C1EK57 . .825 C1EK58 . .699 C1EK59 . .699
Fluid Conveying
1320

Part No. Page C1EK60 . .699 C1EK61 . .699 C1EK62 . .699 C1EK66 . .647 C1EK71 . .974 C1EK73 . .974 C1EK74 . .974 C1EK75 . .974 C1EK76 . .974 C1EK77 . .974 C1EK78 . .974 C1EK79 . .974 C1EK80 . .974 C1EK81 . .974 C1EK82 . .974 C1EK84 . .974 C1EK85 . .209 C1EK87 1081, . . . . . . . .1150 C1EK92 1081, . . . . . . . .1150 C1EK98 1081, . . . . . . . .1150 C1EL11 . .292 C1EL14 . . .92 C1EL17 .1219 C1EL18 . .156 C1EL26 1081, 1150 C1EL27 1081, 1150 C1EL30 . .269 C1EL31 . .269 C1EL32 . .100 C1EL47 . .869 C1EL48 . .934 C1EL53 . .136 C1EL55 . .840 C1EL58 . .995 C1EL75 . 366, 367 C1EL76 . 366, 367, . . . . .371 C1EL78 . 366, 367 C1EL81 . 366, 367, . . . . .371 C1EL86 . .367 C1EL89 . .367 C1EL91 . .367 C1EL92 . .367 C1EL93 . .364 C1EL94 . .363 C1EL95 . .363 C1EM17 . 366, 367 C1EM19 . 366, 367 C1EM20 . .946 C1EM24 . 804, 1131 C1EM25 . .804 C1EM26 . .830 Part No. Page C1EM29 . 771 C1EM30 . 772 C1EM32 . 786 C1EM33 . 787 C1EM34 . 787 C1EM35 . 785 C1EM36 . 786 C1EM37 . 786 C1EM38 . 786 C1EM39 . 786 C1EM41 . 787 C1EM43 . 787 C1EM44 . 785 C1EM45 . 786 C1EM46 . 786 C1EM47 . 786 C1EM48 . 786 C1EM49 . 787 C1EM50 . 786 C1EM51 . 786 C1EM52 . 785 C1EM53 . 785 C1EM54 . 785 C1EM55 . 785 C1EM74 . 791 C1EM80 . 786 C1EM81 . 786 C1EM82 . 786 C1EM91 . 966 C1EM92 . 971 C1EM93 . 983 C1EN15 1056 C1EN16 1053 C1EN21 . 124 C1EN22 1050 C1EN25 . 908 C1EN33 1221 C1EN35 . 144 C1EN36 . 144 C1EN39 . 802 C1EN49 1069, . . . . . . . . 1152 C1EN50 1069, . . . . . . . . 1152 C1EN53 . 306 C1EN54 . 181 C1EN56 . 309 C1EN59 1229 C1EN61 756, 1156 C1EN62 756, 1156 C1EN63 756, 1156 C1EN67 . 988 C1EN69 . 974 C1EN71 . 632 C1EN75 . 172 C1EN77 . 168 C1EN78 . 168 C1EN82 . 168 C1EN84 . 168 C1EN86 . 168 Part No. Page C1EN94 C1EN95 C1EN96 C1EN97 C1EN99 C1EP14 C1EP17 C1EP18 C1EP21 C1EP22 C1EP23 C1EP24 C1EP27 C1EP28 C1EP32 C1EP33 C1EP40 C1EP42 C1EP43 C1EP44 C1EP49 C1EP50 C1EP70 C1EP71 C1EP72 C1EP74 C1EP75 C1EP77 C1EP79 C1EP81 C1EP83 C1EP84 C1EP86 C1EP87 C1EP94 C1EP95 C1EP96 C1EP97 C1EP99 C1EQ11 C1EQ12 C1EQ22 C1EQ23 C1EQ28 1129 C1EQ29 1129 C1EQ30 C1EQ32 C1EQ34 C1EQ35 C1EQ36 C1EQ37 C1EQ38 C1EQ39 C1EQ41 C1EQ42 C1EQ43 C1EQ44 C1EQ45 C1EQ47 C1EQ48 C1EQ65 . 168 . 168 . 169 . 169 . 757 . 169 . 316 1108 . 171 . 171 . 171 . 171 . 171 1093 . 878 . 755 . 840 . 849 1236 1236 . 842 . 842 1139 . 381 . 381 . 381 1093 . 381 . 381 . 941 . 941 . 941 . 941 . 941 . 941 . 941 . 941 . 941 . 941 . 740 . 740 . 744 . 744 . 814, . 813, . 995 . 941 . 941 . 941 . 941 . 942 . 942 . 943 . 947 . 947 1093 . 947 . 945 . 756 . 756 1023 Part No. Page C1EQ66 C1EQ67 C1EQ78 C1EQ81 C1EQ84 C1EQ85 C1ER20 C1ER25 C1ER26 C1ER27 C1ER29 C1ER31 C1ER32 C1ER42 C1ER45 C1ER46 C1ER47 C1ER50 C1ER51 C1ER52 C1ER53 C1ER54 C1ER55 C1ER60 C1ER61 C1ER62 C1ER64 C1ER65 C1ER66 C1ER69 C1ER70 C1ER71 C1ER73 C1ER75 C1ER76 C1ER78 C1ER79 C1ER80 C1ER82 C1ER84 C1ER85 C1ER86 C1ER91 C1ER98 C1ER99 C1ES22 C1ES36 C1ES43 C1ES44 C1ES45 C1ES46 C1ES47 C1ES48 C1ES49 C1ES50 C1ES51 C1ES52 C1ES53 C1ES57 C1ES58 C1ES59 C1ES60 C1ES61 . . 758 . . 758 . . 394 . . 382 . . 382 . . 382 . . 212 . . 845 . . 845 . . 845 . . 845 . . 845 . . 845 . 1244 . 1236 . . 843 . . 843 . 1177 . 1177 . 1178 . . 348 . . 887 . . 887 . 1114 . 1088 . 1088 . 1113 . 1113 . 1113 . 1113 . 1113 . 1113 . . 887 . 1114 . 1114 . 1113 . 1113 . 1113 . 1113 . 1113 . 1113 . 1113 . . 887 . . . 92 . 1221 . 1221 . . 633 . 1091 . 1091 . . 856 . . 856 . . 856 . . 856 . . 856 . . 856 . . 856 . . 856 . . 856 . . 857 . . 857 . . 857 . . 857 . . 857 Part No. Page C1ES62 C1ES63 C1ES64 C1ES65 C1ES66 C1ES69 C1ES74 C1ES81 C1ES83 C1ES92 C1ES94 C1ES95 C1ES97 C1ES99 C1ET11 C1ET12 C1ET14 C1ET15 C1ET18 C1ET19 C1ET20 C1ET21 C1ET31 C1ET32 C1ET35 C1ET43 C1ET44 C1ET47 C1ET48 C1ET49 C1ET50 C1ET51 C1ET53 C1ET54 C1ET55 C1ET56 C1ET57 C1ET58 C1ET61 C1ET62 C1ET63 C1ET64 C1ET65 C1ET67 C1ET68 C1ET69 C1ET70 C1ET71 C1ET72 C1ET73 C1ET74 C1ET75 C1ET76 C1ET77 C1ET78 C1ET79 C1ET80 C1ET81 C1ET83 C1ET92 C1ET93 305 C1ET94 . 857 . 857 1091 . 773 . 765 . 781 . 993 1091 1091 . 204 . 994 . 994 . 994 . 936 . 936 . 936 . 936 . 936 . 936 . 936 . 936 . 936 . 936 . 936 . 936 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 929 . 929 . 929 . 929 . 929 . 929 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 928 . 329 .199, 1197 Part No. Page C1ET95 C1ET96 C1ET99 C1EU11 C1EU13 C1EU14 C1EU33 C1EU37 C1EU45 C1EU46 C1EU47 C1EU48 C1EU49 C1EU50 C1EU57 C1EU61 C1EU62 C1EU65 C1EU66 C1EU72 C1EU76 C1EU82 C1EU88 C1EU91 C1EU94 C1EU95 C1EU96 C1EU97 C1EU98 C1EV13 C1EV29 C1EV31 C1EV47 C1EV49 C1EV56 C1EV57 C1EV58 C1EV59 C1EV60 C1EV62 C1EV79 C1EV89 C1EV90 C1EV91 C1EV94 C1EV95 C1EV97 C1EW17 C1EW18 C1EW19 C1EW20 C1EW26 C1EW27 C1EW29 C1EW38 C1EW39 C1EW40 C1EW41 C1EW43 C1EW44 C1EW45 C1EW46 C1EW48 .1205 . .841 .1221 . .994 . .994 . .994 .1221 . .118 .1225 .1225 .1225 .1225 .1225 .1230 . .739 . .942 . .804 . .805 . .805 .1221 .1222 .1019 . .631 .1221 .1018 .1108 .1108 .1108 .1108 .1179 .1221 . .340 . .935 . .139 . .813 . .774 . .772 . .782 . .788 .1001 . .204 .1229 . .928 . .723 .1221 .1221 .1221 . .88 .765 .985 .861 .780 1222 .169 .891 .891 .891 .891 .891 .891 1221 1221 1009 Part No. Page C1EW56 C1EW59 C1EW60 C1EW61 C1EW62 C1EW63 C1EW75 C1EW76 C1EW77 C1EW78 C1EW79 C1EW83 C1EW84 C1EW85 C1EW86 C1EW89 C1EW92 C1EW93 C1EW95 C1EW98 C1EW99 C1EX13 C1EX15 C1EX17 C1EX18 C1EX19 C1EX23 C1EX25 C1EX26 C1EX27 C1EX29 C1EX30 C1EX32 C1EX35 C1EX40 C1EX44 C1EX45 C1EX46 C1EX47 C1EX48 C1EX49 C1EX50 C1EX51 C1EX52 C1EX53 C1EX55 C1EX56 C1EX61 C1EX63 C1EX64 C1EX65 C1EX71 C1EX75 C1EX76 C1EX89 C1EX90 C1EX93 C1EX94 C1EX95 C1EX96 C1EX97 C1EX98 C1EX99 . 842 1185 1185 1185 1185 1203 . 941 1098 1098 1098 . 811 . 946 . 946 . 946 . 946 . 829 1033 1008 1004 1222 1221 1224 1103 . 843 1226 1226 1230 1101 1101 1101 1101 1101 1101 1101 1101 . 788 . 817 . 817 . 817 . 817 . 816 . 816 . 816 . 816 . 824 . 824 . 824 . 992 . 979 1050 . 104 . 871 . 953 . 330 1221 1222 . 824 . 823 . 823 . 823 . 823 . 823 . 823 Part No. Page C1EY11 C1EY12 C1EY13 C1EY14 C1EY15 C1EY16 C1EY21 C1EY22 C1EY24 C1EY25 C1EY26 C1EY29 C1EY31 C1EY33 C1EY34 C1EY35 C1EY36 C1EY37 C1EY38 C1EY39 C1EY41 C1EY42 C1EY44 C1EY45 C1EY46 C1EY48 C1EY50 C1EY51 C1EY52 C1EY53 C1EY54 C1EY55 C1EY56 C1EY57 C1EY58 C1EY59 C1EY60 C1EY66 C1EY67 C1EY69 C1EY70 C1EY74 C1EY75 C1EY76 C1EY77 C1EY78 C1EY79 C1EY80 C1EY81 C1EY82 C1EY84 C1EY85 C1EY86 C1EY87 C1EY88 C1EY89 C1EY90 C1EY91 C1EY92 C1EY94 C1EY95 C1EY97 C1EY98 . .823 .1099 .1099 .1099 .1099 . .824 . .818 . .818 . .818 . .818 . .818 . .821 . .821 . .821 . .821 . .821 . .821 . .821 . .821 . .821 . .821 . .821 . .817 . .817 . .817 . .817 . .818 . .818 . .818 . .822 . .822 . .822 . .822 . .822 . .822 . .822 . .822 . .822 . .822 . .822 . .822 . .820 . .820 . .820 . .817 . .817 . .817 . .817 . .817 . .817 . .818 . .818 . .818 . .818 . .818 . .818 . .818 . .820 . .820 . .819 . .819 . .820 . .820
1321

Part No. Page C1EZ13 . .946 C1EZ14 . .946 C1EZ15 . .946 C1EZ16 . .946 C1EZ18 . .946 C1EZ19 . .946 C1EZ20 . .946 C1EZ21 . .946 C1EZ22 . 754, 824, . . . .1158 C1EZ23 . 754, 824, . . . .1158 C1EZ24 . 754, 823 C1EZ25 . .743 C1EZ26 . .743 C1EZ27 . .743 C1EZ28 . .743 C1EZ29 .1221 C1EZ30 .1028 C1EZ50 .1104 C1EZ51 .1104 C1EZ52 .1104 C1EZ55 .1104 C1EZ56 .1104 C1EZ57 .1104 C1EZ58 .1104 C1EZ59 .1104 C1EZ60 .1104 C1EZ61 .1104 C1EZ62 .1104 C1EZ63 .1104 C1EZ66 .1102 C1EZ68 .1102 C1EZ69 .1102 C1EZ70 .1102 C1EZ71 .1102 C1EZ72 .1102 C1EZ73 .1103 C1EZ74 .1103 C1EZ75 .1103 C1EZ77 .1103 C1EZ78 .1235 C1EZ80 .1221 C1EZ82 . .312 C1EZ84 . .143 C1EZ85 . .141 C1EZ93 . .805 C1EZ95 .1221 C1EZ96 . .839 C1EZ98 .1221 C1FA28 . .830 C1FA30 . . .99 C1FA32 . .764 C1FA37 . .786 C1FA38 . .787 C1FA46 .1012 C1FA48 . .786 C1FA49 . .787 C1FA52 .1044 C1FA54 . .993 C1FA55 . .955 C1FA57 .1008 Part No. Page C1FA61 C1FA64 C1FA67 C1FA72 C1FA73 C1FA75 C1FA80 C1FA83 C1FA86 C1FA88 C1FA90 C1FA91 C1FA93 C1FA94 C1FA95 C1FA96 C1FC33 C1FC34 C1FC35 C1FC36 C1FC39 C1FC41 C1FC48 C1FC49 C1FC54 C1FC55 C1FC63 C1FC68 C1FC69 C1FC74 C1FC77 C1FC78 C1FC79 C1FC80 C1FC81 C1FC82 C1FC83 C1FC84 C1FC87 C1FC89 C1FC90 C1FC91 C1FC92 C1FC93 C1FC94 C1FC95 C1FC96 C1FC97 C1FC98 C1FD17 C1FD24 C1FD25 C1FD26 C1FD28 C1FD31 C1FD32 C1FD36 C1FD38 C1FD39 1156 C1FD41 C1FD51 C1FD52 . . 979 . . 936 . . 930 . . 953 . . 244 . . 307 . . 113 . 1016 . 1016 . 1016 . 1020 . 1020 . 1020 . 1020 . 1020 . 1197 . 1023 . 1023 . 1023 . 1023 . . 381 . . 381 . 1002 . 1231 . 1033 . 1004 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1185 . 1181 . . 967 . . 967 . . 990 . . 980 . . 104 . . 769 . . 953 . . 182 . 756, . . 990 . 1008 . 1008 Part No. Page C1FD53 C1FD54 C1FD55 C1FD56 C1FD57 C1FD76 C1FD90 C1FD91 C1FD92 C1FD94 C1FD97 C1FD98 C1FD99 C1FE11 C1FE36 C1FE42 C1FE49 C1FE51 C1FE53 C1FE57 C1FE64 C1FE68 C1FE70 C1FE71 C1FE75 C1FE80 C1FE81 C1FE84 C1FE85 C1FE86 C1FE87 C1FE88 C1FE91 C1FE92 C1FE98 C1FE99 C1FF14 C1FF28 C1FF42 C1FF44 C1FF46 C1FF48 C1FF54 C1FF61 C1FF63 C1FF65 C1FF70 C1FF72 C1FF78 C1FF81 1062 C1FF82 C1FF84 C1FF85 C1FF97 C1FG15 C1FG17 C1FG22 C1FG24 C1FG25 C1FG26 C1FG29 C1FG30 1016 1022 1022 1010 1010 . 938 . 170 . 170 . 170 . 170 . 170 . 170 . 170 . 170 1221 . 263 . 133 . 133 . 133 . 136 . 785 1056 . 979 1046 1047 . 331 1182 1015 1015 1015 . 981 . 981 1099 1136 . 831 . 831 1023 . 402 . 805 . 108 . 775 . 764 . 785 1059 . 992 . 878 . 930 1016 1011 1059, . 321 1011 1197 . 702 . 937 1228 . 312 1094 1094 1094 1094 1094 Part No. Page C1FG31 C1FG32 C1FG42 C1FG54 C1FG55 C1FG56 C1FG58 C1FG80 C1FG81 C1FG82 C1FG86 C1FG88 C1FG89 C1FG90 C1FG96 C1FG97 C1FG98 C1FG99 C1FH11 C1FH12 C1FH13 C1FH14 C1FH15 C1FH17 C1FH18 C1FH19 C1FH20 C1FH21 C1FH23 C1FH29 C1FH30 C1FH43 C1FH44 C1FH45 C1FH46 C1FH47 C1FH49 C1FH50 C1FH52 C1FH53 C1FH58 C1FH59 C1FH60 C1FH61 C1FH73 C1FH80 C1FH86 C1FH88 C1FH97 C1FJ12 C1FJ14 C1FJ15 C1FJ22 C1FJ23 C1FJ24 C1FJ25 C1FJ30 C1FJ54 C1FJ62 C1FJ63 C1FJ64 C1FJ65 C1FJ67 . 1094 . 1094 . . 857 . 1009 . 1009 . 1009 . 1009 . 1077 . 1077 . 1077 . 1047 . 1047 . 1047 . 1047 . 1046 . . 833 . . 833 . . 833 . . 834 . . 834 . . 834 . . 834 . . 834 . 1045 . 1045 . 1045 . 1045 . 1045 . 1045 . 1104 . 1104 . 1110 . 1110 . 1110 . 1110 . 1110 . 1110 . 1110 . 1111 . 1111 . . 136 . . 706 . . 706 . . 864 . . . 92 . . 787 . . 956 . . 141 . . 284 . . 284 . . 917 . 1253 . . 643 . 1064 . 1060 . . 131 . . 391 . . 889 . . 841 . . 841 . 1064 . 1064 . 1064 Part No. Page C1FJ68 . 1064 C1FJ69 . . 764 C1FJ72 . . 788 C1FJ73 . . 788 C1FJ75 . . 787 C1FJ76 . . 788 C1FJ77 . . 788 C1FJ79 . . 786 C1FJ80 . . 786 C1FJ84 . . 787 C1FJ85 . . 785 C1FJ92 . . 785 C1FJ94 . . 993 C1FJ99 . 1046 C1FK20 .213, 265, 271, 333 C1FK22 .199, 238, 245, 283, . . . . . . . . . 297 C1FK27 1055 C1FK28 1013 C1FK29 1008 C1FK30 1008 C1FK31 1008 C1FK32 1015 C1FK33 . 862 C1FK34 1003 C1FK36 1064 C1FK49 1081, . . . . . . . . 1150 C1FK51 1081, . . . . . . . . 1150 C1FK53 1071 C1FK54 1084, . . . . . . . . 1151 C1FK57 . 949 C1FK58 . 949 C1FK62 1110 C1FK64 1111 C1FK65 1111 C1FK76 1045 C1FK77 1038 C1FK78 1038 C1FK80 1038 C1FK81 . 833 C1FK82 . 833 C1FK84 1051 C1FK85 1096 C1FL13 . . 775 C1FL14 . . 785 C1FL16 . . 786 C1FL18 . . 839 C1FL21 . 1059 C1FL30 . . 982 C1FL31 . . 271 C1FL40 . . 820 C1FL41 . . 820 C1FL42 . . 820 C1FL44 . . 820 C1FL45 . . 817 C1FL46 . . 818 C1FL47 . . 818 C1FL63 . . 821 Part No. Page C1FL64 . .821 C1FL71 . .819 C1FL73 . .819 C1FL74 . .820 C1FL79 . .819 C1FL80 . .819 C1FL81 . .819 C1FL82 . .819 C1FL83 . .817 C1FM18 . .356 C1FM19 . .356 C1FM21 . .354 C1FM22 . .354 C1FM27 . .354 C1FM38 .1015 C1FM43 .1021 C1FM48 .1148 C1FM49 .1148 C1FM52 .1148 C1FM53 .1148 C1FM54 .1148 C1FM55 .1148 C1FM56 .1148 C1FM57 .1148 C1FM60 .1136 C1FM62 .1136 C1FM63 .1136 C1FM65 .1136 C1FM70 . .825 C1FM72 . .942 C1FM73 . .946 C1FM79 . 284, 308 C1FM80 . .349 C1FM83 . .998 C1FM84 . .785 C1FM85 . .786 C1FM86 . .786 C1FM89 . .788 C1FM93 .1037 C1FM96 . .356 C1FN12 . 349, 350, . . . . .354 C1FN14 . .356 C1FN16 . .350 C1FN17 . .839 C1FN18 . .158 C1FN19 . .953 C1FN22 . .891 C1FN24 . .891 C1FN26 .1015 C1FN27 .1015 C1FN28 .1015 C1FN29 . .891 C1FN30 .1021 C1FN31 .1022 C1FN32 .1022 C1FN37 . .889 C1FN41 .1134 C1FN45 . .712 C1FN46 . .821 C1FN50 . .912 C1FN59 . .912 Part No. Page C1FN65 C1FN71 C1FN73 C1FN75 C1FN85 C1FN86 C1FN87 C1FN88 C1FN89 C1FN91 C1FN92 C1FN94 C1FN96 C1FN97 C1FN98 C1FN99 C1FP12 C1FP13 C1FP14 C1FP15 C1FP16 C1FP17 C1FP18 C1FP19 C1FP21 C1FP22 C1FP23 C1FP26 C1FP27 C1FP28 C1FP29 C1FP30 C1FP31 C1FP32 C1FP33 C1FP34 C1FP35 C1FP36 C1FP37 C1FP38 C1FP39 C1FP40 C1FP41 C1FP43 C1FP44 C1FP45 C1FP46 C1FP47 C1FP48 C1FP49 C1FP50 C1FP51 C1FP53 C1FP54 C1FP55 C1FP56 C1FP58 C1FP59 C1FP60 C1FP61 C1FP64 C1FP65 C1FP66 . 912 . 912 . 912 . 912 . 895 . 895 . 899 . 897 . 895 . 897 . 899 . 896 . 900 . 895 . 895 . 895 . . 896 . . 896 . . 896 . . 900 . . 899 . . 897 . . 898 . . 898 . . 897 . . 899 . . 896 . . 900 . . 900 . . 895 . . 895 . . 895 . . 896 . . 896 . . 896 . . 896 . . 900 . . 899 . . 897 . . 897 . . 898 . . 898 . . 900 . . 899 . . 896 . . 896 . . 900 . . 900 . . 895 . . 895 . . 895 . . 896 . . 896 . . 896 . . 900 . . 899 . . 897 . . 897 . . 898 . . 898 . . 383 . 1034 . 1034 Part No. Page C1FP68 C1FP71 C1FP72 C1FP74 C1FP76 C1FP77 C1FP78 C1FP79 C1FP80 C1FP81 C1FP82 C1FP83 C1FP92 C1FP94 C1FP95 C1FP96 C1FP97 C1FP99 C1FQ11 C1FQ13 C1FQ14 C1FQ20 C1FQ24 C1FQ25 C1FQ26 C1FQ30 C1FQ31 C1FQ34 C1FQ44 C1FQ46 308 C1FQ51 C1FQ52 C1FQ53 C1FQ61 C1FQ64 C1FQ65 C1FQ67 C1FQ68 C1FQ69 C1FQ72 C1FQ74 C1FQ78 C1FQ79 C1FQ80 C1FQ81 C1FQ83 C1FQ86 C1FQ87 C1FQ88 C1FQ89 C1FQ90 C1FQ93 C1FQ95 C1FR11 C1FR13 C1FR17 C1FR18 C1FR20 C1FR24 C1FR25 C1FR31 C1FR32 .1034 . .901 . .901 . .901 . .901 . .901 . .901 . .901 . .901 . .668 . .668 . .668 . .104 . .891 . .891 . .330 .1013 .1008 .1003 .1059 .1059 .1060 .1139 . .712 . .995 . .793 . .793 .1004 . .249 . 284, . .326 . .195 . .330 . .285 . .365 . .766 . .788 .1038 .1047 . .996 . .996 .1011 .1004 .1004 .1004 .1004 . .946 . .368 . .896 . .898 . .897 .1030 .1051 . .634 .1104 .1247 . .184 . .632 . .899 . .899 . .899 . .899
Fluid Conveying
1322

Part No. Page C1FR34 C1FR38 C1FR39 C1FR40 C1FR41 C1FR42 C1FR43 C1FR44 C1FR46 C1FR48 C1FR49 C1FR53 C1FR57 C1FR58 C1FR59 C1FR60 C1FR61 C1FR62 C1FR63 C1FR64 C1FR82 C1FR83 C1FR84 C1FR85 C1FR89 C1FR90 C1FS16 C1FS35 C1FS45 C1FS46 C1FS49 C1FS50 C1FS52 C1FS53 C1FS54 C1FS55 C1FS56 C1FS59 C1FS61 C1FS72 C1FS73 C1FS74 C1FS75 C1FS76 C1FS77 C1FS79 C1FS80 C1FS81 C1FS82 C1FS86 C1FS88 C1FS89 C1FS91 C1FS97 C1FS98 C1FS99 C1FT11 C1FT13 C1FT16 C1FT17 C1FT20 C1FT21 C1FT22 . .896 .1246 .1247 .1247 .1247 .1246 .1247 .1246 . .891 . .891 . .891 . .367 .1248 .1248 .1247 .1246 .1246 .1246 .1247 . .774 .1015 .1015 .1015 .1003 . .943 . .948 .1045 .1037 .1041 .1041 . .833 . .928 .1248 .1248 .1247 .1247 . .736 . .736 . .735 . .840 . .840 . .840 . .840 . .840 . .840 . .840 . .840 . .840 . .734 . .734 . .734 . .735 . .735 . .785 . .729 . .729 . .729 . .729 . .729 . .729 . .729 . .729 . .729 Part No. Page C1FT25 C1FT29 C1FT30 C1FT31 C1FT33 C1FT34 C1FT35 C1FT36 C1FT40 C1FT42 C1FT43 C1FT44 C1FT45 C1FT46 C1FT47 C1FT48 C1FT49 C1FT50 C1FT52 C1FT57 C1FT61 C1FT62 C1FT63 C1FT64 C1FT65 C1FT66 C1FT67 C1FT69 C1FT70 C1FT71 C1FT72 C1FT73 C1FT74 C1FT76 C1FT77 C1FT78 C1FT79 C1FT80 C1FT81 C1FT82 C1FT83 C1FT84 C1FT85 C1FT86 C1FT87 C1FT88 C1FT89 C1FT90 C1FT91 C1FT92 C1FT93 C1FT95 C1FT96 C1FT97 C1FT98 C1FU12 C1FU13 C1FU15 C1FU16 C1FU17 C1FU18 C1FU19 C1FU20 . . 731 . . 728 . . 728 . . 728 . . 728 . . 728 . . 728 . . 728 . . 728 . . 728 . . 728 . . 728 . . 730 . . 730 . . 730 . . 730 . . 730 . . 730 . . 730 . . 731 . . 731 . . 733 . . 733 . . 733 . . 732 . . 732 . . 732 . . 732 . . 732 . . 732 . . 732 . . 732 . . 732 . . 980 . . 980 . . 980 . . 980 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 860 . . 863 . . 863 . . 863 . . 863 . . 863 . . 863 . . 863 . . 863 Part No. Page C1FU21 C1FU22 C1FU23 C1FU25 C1FU26 C1FU29 C1FU35 C1FU39 C1FU40 C1FU41 C1FU42 C1FU44 C1FU45 C1FU48 C1FU49 C1FU51 C1FU52 C1FU53 C1FU55 C1FU56 C1FU59 C1FU60 C1FU61 C1FU62 C1FU63 C1FU64 C1FU65 C1FU66 C1FU70 C1FU71 C1FU72 C1FU73 C1FU74 C1FU75 C1FU76 C1FU77 C1FU78 C1FU79 C1FU80 C1FU81 C1FU85 C1FU98 C1FU99 C1FV11 C1FV18 C1FV19 C1FV20 C1FV21 C1FV22 C1FV24 C1FV25 C1FV27 C1FV34 C1FV36 C1FV48 C1FV49 C1FV64 C1FV66 C1FV84 C1FV86 C1FV87 C1FV89 C1FV92 . 863 . 863 . 863 1015 1015 1150 . 947 . 718 . 718 . 718 . 718 . 720 . 720 . 720 . 720 . 720 . 720 . 720 . 720 . 720 . 720 . 717 . 717 . 717 . 717 . 717 . 717 . 717 . 666 . 666 . 666 . 666 . 666 . 666 . 666 . 666 . 666 . 666 . 666 . 666 1031 1064 1064 . 730 . 731 . 731 . 731 . 731 . 731 . 731 . 731 . 731 . 326 . 253 . 773 . 142 1060 . 972 . 750 1134 1134 . 808 1081, Part No. Page . . . . . . . . 1150 C1FV93 . . 947 C1FV98 . . 718 C1FW19 . 142 C1FW33 1245 C1FW40 . 841 C1FW42 . 767 C1FW43 . 764 C1FW44 . 764 C1FW45 . 764 C1FW55 . 841 C1FW56 . 841 C1FW57 . 841 C1FW63 1182 C1FX38 . . 885 C1FX39 . . 885 C1FX57 . . 891 C1FX62 . . 981 C1FX69 . 1020 C1FX72 . . 846 C1FX77 . . 846 C1FX85 . . 848 C1FX86 . . 848 C1FX87 . . 848 C1FX88 . . 848 C1FX89 . . 848 C1FX90 . . 848 C1FX91 . . 848 C1FX92 . . 848 C1FX93 . . 848 C1FX95 . . 848 C1FX96 . . 848 C1FX97 . . 848 C1FX98 . . 848 C1FX99 . . 848 C1FY11 . . 848 C1FY12 . . 848 C1FY13 . . 848 C1FY16 . . 847 C1FY17 . . 847 C1FY18 . . 847 C1FY19 . . 847 C1FY20 . . 847 C1FY21 . . 847 C1FY22 . . 847 C1FY23 . . 847 C1FY25 . . 849 C1FY26 . . 849 C1FY27 . . 849 C1FY28 . . 849 C1FY29 . . 849 C1FY30 . . 849 C1FY31 . . 849 C1FY32 . . 849 C1FY33 . . 849 C1FY35 . . 849 C1FY36 . . 849 C1FY38 . . 849 C1FY39 . . 849 C1FY41 . . 849 C1FY42 . . 849 C1FY45 . . 849 C1FY46 . . 849 Part No. Page C1FY48 . 849 C1FY49 . 849 C1FY51 . 849 C1FY52 . 849 C1FY54 . 848 C1FY55 . 848 C1FY56 . 848 C1FY57 . 848 C1FY58 . 848 C1FY59 . 848 C1FY60 . 848 C1FY61 . 848 C1FY62 . 848 C1FY64 . 848 C1FY65 . 848 C1FY66 . 848 C1FY67 . 848 C1FY68 . 848 C1FY69 . 848 C1FY70 . 848 C1FY71 . 848 C1FY72 . 848 C1FY76 . 876 C1FY77 . 876 C1FY78 . 876 C1FY79 . 876 C1FY80 . 876 C1FY81 . 876 C1FY82 . 876 C1FY83 . 876 C1FY84 . 876 C1FY85 . 876 C1FY86 . 876 C1FY87 . 876 C1FY88 . 876 C1FY89 . 876 C1FY90 . 876 C1FY91 . 877 C1FY92 . 877 C1FY93 . 877 C1FY94 . 877 C1FY96 . 877 C1FY97 . 877 C1FY98 . 877 C1FY99 . 877 C1FZ11 . 877 C1FZ12 . 877 C1FZ13 . 877 C1FZ15 . 877 C1FZ16 . 877 C1FZ17 . 877 C1FZ20 . 849 C1FZ21 . 849 C1FZ22 . 849 C1FZ23 . 849 C1FZ24 . 849 C1FZ25 . 849 C1FZ26 . 849 C1FZ28 . 849 C1FZ31 . 404 C1FZ32 .344, 345, 347, 353 C1FZ49 1084 Part No. Page C1FZ56 . .947 C1FZ61 . .804 C1FZ62 . .804 C1FZ75 . 344, 345, . . . . .347 C1FZ78 . .720 C1FZ83 . .852 C1FZ92 . .864 C1FZ94 . .864 C1FZ95 . .864 C1FZ96 . .864 C1FZ98 .1027 C1FZ99 .1027 C1GA14 .1006 C1GA20 . .131 C1GA22 . .131 C1GA23 . .131 C1GA24 . .131 C1GA29 . .343 C1GA43 . .344 C1GA44 . .343 C1GA45 . 345, 347 C1GA46 . 345, 347 C1GA47 . 345, 347 C1GA55 .1103 C1GA56 .1035 C1GA57 . .345 C1GA58 . .344 C1GA59 . .344 C1GA60 . .345 C1GA61 . .346 C1GA62 . .843 C1GA63 . .843 C1GA64 . .843 C1GA65 . .843 C1GA66 . .843 C1GA67 . .843 C1GA70 . .839 C1GA81 . .887 C1GA94 . .788 C1GA97 . .729 C1GB14 . .729 C1GB19 . .728 C1GB22 . .728 C1GB53 .1022 C1GB57 .1003 C1GB58 .1003 C1GB62 .1252 C1GB63 .1064 C1GB64 .1134 C1GB65 .1134 C1GB67 .1127 C1GB72 .1127 C1GB86 . .897 C1GB87 . .897 C1GB94 . .897 C1GC14 .1009 C1GC15 . .864 C1GC16 . .864 C1GC17 . .864 Part No. Page C1GC18 C1GC19 C1GC20 C1GC21 C1GC22 C1GC23 C1GC24 C1GC35 C1GC38 C1GC39 C1GC42 C1GC44 C1GC47 C1GC51 C1GC52 C1GC58 C1GC59 C1GC60 C1GC67 C1GC69 C1GC76 C1GC83 C1GC87 C1GC88 C1GC90 C1GC92 C1GC93 C1GC98 C1GC99 C1GD11 C1GD12 C1GD14 C1GD15 C1GD16 C1GD17 C1GD18 C1GD20 C1GD23 C1GD30 C1GD31 C1GD32 C1GD87 C1GD94 C1GD96 C1GD97 C1GD98 C1GE11 C1GE14 C1GE15 C1GE21 C1GE52 C1GE66 C1GE90 C1GE91 C1GE92 C1GE93 C1GE94 C1GF12 C1GF13 C1GF14 C1GF15 C1GF16 C1GF17 . 864 . 864 . 864 . 864 . 864 . 864 . 864 . 724 1127 1127 1127 1127 1127 1127 1127 1118 1118 1118 . 866 . 634 . 840 . 900 . 900 . 900 . 896 . 900 . 900 . 896 . 896 . 897 . 896 . 896 . 726 . 726 . 726 . 726 . 954 . 803 . 787 . 789 . 729 1015 . 798 . 942 . 942 . 823 . 896 . 895 . 726 . 843 . 267 . 996 . 947 . 947 . 947 . 947 . 945 1111 . 750 . 750 . 751 . 751 . 896 Part No. Page C1GF19 . .897 C1GF21 . .898 C1GF22 . .898 C1GF26 . .898 C1GF30 . .898 C1GF33 .1025 C1GF47 .1037 C1GF50 .1041 C1GF54 . .839 C1GF56 . .928 C1GF59 . .844 C1GF60 . .844 C1GF62 . .342 C1GF69 .1253 C1GF70 .1253 C1GF75 . .263 C1GF77 . .358 C1GF80 . .840 C1GF81 . .840 C1GF89 . .263 C1GF95 . 344, 345, 347, 353 C1GF98 .1132 C1GG11 .1132 C1GG12 .1132 C1GG13 .1132 C1GG14 .1132 C1GG15 .1132 C1GG16 .1132 C1GG17 . .821 C1GG21 .1200 C1GG26 .1185 C1GG28 .1024 C1GG32 .1190 C1GG33 .1190 C1GG34 .1190 C1GG35 .1190 C1GG36 .1190 C1GG37 .1190 C1GG38 .1190 C1GG41 . .372 C1GG42 .1181 C1GG44 . .372 C1GG46 . .825 C1GG47 . .779 C1GG49 . .788 C1GG50 . .789 C1GG60 .1250 C1GG64 .1011 C1GG66 .1011 C1GG69 .1011 C1GG71 .1011 C1GG72 .1016 C1GG73 .1016 C1GG75 .1016 C1GG80 . .280 C1GG81 . .948 C1GG85 . 344, 345, . . . . .347 C1GG86 . .900 C1GG88 . .896 C1GG92 . .108 C1GG93 .1064
1323

Part No. Page C1GG99 C1GH15 C1GH16 C1GH24 C1GH25 C1GH29 C1GH30 C1GH34 C1GH36 C1GH46 C1GH47 C1GH48 C1GH54 C1GH56 C1GH59 C1GH64 C1GH65 C1GH69 C1GH70 C1GH71 C1GH73 C1GH77 C1GH79 C1GH97 C1GJ22 C1GJ23 C1GJ24 C1GJ25 C1GJ26 C1GJ39 C1GJ40 C1GJ46 C1GJ47 C1GJ48 C1GJ49 C1GJ50 C1GJ51 C1GJ52 C1GJ53 C1GJ54 C1GJ55 C1GJ56 C1GJ63 C1GJ64 C1GJ66 C1GJ67 C1GJ68 C1GJ69 C1GJ70 C1GJ71 C1GJ72 C1GJ73 C1GJ89 C1GJ94 C1GJ95 C1GJ96 C1GK26 C1GK27 C1GK41 C1GK51 C1GK53 C1GK55 C1GK59 . .859 .1248 .1248 . .915 . .916 . .270 . .272 . .986 .1041 . .839 . .841 . .733 . .158 . .297 .1182 . .966 . .108 . .891 .1230 .1230 .1008 .1022 .1022 . .840 . .751 . .751 . .751 . .751 . .841 . .759 . .759 . .927 . .927 . .927 . .927 . .927 . .927 . .927 . .927 . .927 . .140 . .947 . .947 . .947 . .760 . .760 . .760 . .760 . .759 . .759 . .759 . .759 . .899 . .899 . .899 .1028 .1184 .1184 . .281 . .302 . .315 . .325 . .391 Part No. Page C1GK61 1035 C1GK68 . 901 C1GK82 1178 C1GK85 . 314 C1GK86 . 314 C1GK87 . 314 C1GK99 . 771 C1GL11 . . 778 C1GL14 . . 789 C1GL15 . . 789 C1GL19 . . 730 C1GL24 . 1250 C1GL26 . . 732 C1GL48 . 1020 C1GL55 . . 339 C1GL76 . . 942 C1GL80 . . 947 C1GL81 . . 947 C1GL86 . . 881 C1GL92 . 1206 C1GM27 . 899 C1GM40 1191 C1GM46 . 859 C1GM65 . 164 C1GM66 . 730 C1GM68 . 840 C1GM69 . 735 C1GM70 1182 C1GM71 1182 C1GM72 1182 C1GM76 1004 C1GM77 . 163 C1GM81 1227 C1GM83 1144 C1GM86 . 943 C1GM87 . 900 C1GM90 1027 C1GM93 . 894 C1GN12 1191 C1GN14 1191 C1GN15 1191 C1GN16 . 769 C1GN21 . 785 C1GN27 . 318 C1GN33 1138 C1GN38 1134 C1GN39 1134 C1GN42 1133 C1GN46 1133 C1GN48 1133 C1HC71 . 850 C1HC73 . 850 C1HC80 1247 C1HC83 1101 C1HC88 . 136 C1HC92 . 630 C1HC95 . 371 C1HC96 1040 C1HD26 . 789 C1HD33 . 989 C1HD34 . 989 C1HD39 1053 C1HD43 . 958 Part No. Page C1HD51 C1HD55 C1HD57 C1HD60 C1HD71 C1HD72 C1HD73 C1HD75 C1HD79 C1HD82 1129 C1HD84 C1HD85 C1HD90 C1HE19 C1HE22 C1HE23 C1HE30 C1HE32 C1HE38 C1HE39 C1HE52 C1HE53 C1HE54 C1HE55 C1HE57 C1HE59 C1HE60 C1HE65 C1HE70 C1HE78 C1HE79 C1HE80 C1HE81 C1HE88 C1HG39 C1HG41 C1HG42 C1HG65 C1HG82 C1HG84 C1HG91 C1HG97 C1HG98 C1HG99 C1HH11 C1HH12 C1HH13 C1HH14 C1HH15 C1HH21 C1HH22 C1HH23 C1HH26 C1HH35 C1HH36 C1HH41 C1HH47 C1HH49 C1HH50 C1HH55 C1HH65 C1HH67 1053 . 982 . 981 . 985 1055 1055 1037 . 840 . 994 . 813, . 933 1054 . 928 1055 . 150 . 150 1020 1020 . 209 . 209 . 799 . 799 . 799 . 799 . 711 . 740 . 740 . 117 . 722 . 823 . 823 . 823 . 823 1097 . 898 . 864 . 864 . 183 1109 1103 1034 1156 1156 1156 1156 1156 1156 1156 1156 1177 1177 1177 . 348 . 117 . 117 . 278 . 277 . 272 . . 88 . 178 . 954 . 910 Part No. Page C1HH68 C1HH70 C1HH71 C1HH75 C1HH76 C1HH77 C1HH83 C1HH87 C1HH88 C1HH98 C1HJ13 C1HJ20 C1HJ21 C1HJ22 C1HJ23 C1HJ24 C1HJ28 C1HJ41 C1HJ42 C1HJ52 C1HJ65 C1HJ66 1156 C1HJ75 1142 C1HJ81 C1HJ85 C1HJ86 C1HJ92 C1HK22 C1HK23 C1HK24 C1HK63 C1HK66 C1HK67 C1HK72 C1HK81 C1HK84 C1HK94 C1HL12 C1HL18 C1HL30 C1HL31 C1HL32 C1HL33 C1HL36 C1HL46 C1HL48 C1HL49 C1HL50 C1HL51 C1HL52 C1HL55 C1HL57 C1HL59 C1HL61 C1HL62 C1HL63 C1HL64 C1HL65 C1HL66 C1HL67 C1HL68 . . 910 . . 774 . . 775 . 1053 . . 163 . . 981 . . 910 . . 104 . . 265 . 1040 . . 276 . . 938 . . 938 . 1054 . . 910 . . 769 . . . 98 . . 996 . . 156 . . 950 . . 756 . 756, 1000, . . 323 . . 268 . . 270 . 1009 . . 808 . . 759 . . 759 . . 995 . . 773 . . 955 . 1025 . . 938 . . 960 . . 979 . . 803 . . 329 . . 822 . 1231 . 1231 . 1231 . . 252 . . 178 . . 902 . . 902 . . 902 . . 902 . . 902 . . 139 . . 914 . . 902 . . 922 . . 922 . . 913 . . 913 . . 913 . . 922 . . 913 . . 922 Part No. Page C1HL69 C1HL70 C1HL71 C1HL73 C1HL74 C1HL75 C1HL76 C1HL77 C1HL78 C1HL79 C1HL80 C1HL83 C1HL84 C1HL85 C1HL87 C1HL91 C1HL92 C1HL93 C1HL94 C1HL95 C1HL96 C1HL97 C1HL98 C1HL99 C1HM11 C1HM13 C1HM14 C1HM15 C1HM16 C1HM17 C1HM18 C1HM19 C1HM20 C1HM21 C1HM22 C1HM23 C1HM24 C1HM25 C1HM26 C1HM27 C1HM28 C1HM29 C1HM30 C1HM31 C1HM33 C1HM34 C1HM35 C1HM38 C1HM39 C1HM40 C1HM41 C1HM42 C1HM43 C1HM44 C1HM46 C1HM47 C1HM48 C1HM49 C1HM50 C1HM54 C1HM55 C1HM56 C1HM58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 913 922 923 915 915 915 923 915 923 915 923 915 915 915 914 922 922 922 922 914 914 914 914 914 914 922 922 914 914 914 922 922 914 914 914 922 922 914 923 923 923 923 915 915 915 915 923 915 915 915 923 923 915 915 923 923 915 915 915 916 916 916 916 Part No. Page C1HM60 C1HM64 C1HM65 C1HM66 C1HM67 C1HM68 C1HM69 C1HM70 C1HM71 C1HM72 C1HM73 C1HM74 C1HM75 C1HM76 C1HM77 C1HM78 C1HM79 C1HM80 C1HM81 C1HM82 C1HM85 C1HM87 C1HM93 C1HM94 C1HM96 C1HM97 C1HM98 C1HM99 C1HN11 C1HN12 C1HN13 C1HN14 C1HN15 C1HN17 C1HN18 C1HN19 C1HN20 C1HN21 C1HN22 C1HN23 C1HN24 C1HN25 C1HN26 C1HN27 C1HN28 C1HN29 C1HN30 C1HN31 C1HN32 C1HN33 C1HN34 C1HN35 C1HN36 C1HN37 C1HN38 C1HN39 C1HN40 C1HN41 C1HN42 C1HN45 C1HN46 C1HN47 C1HN48 .916 .913 .913 .913 1055 1055 1055 1055 .909 .909 .909 .909 .909 .909 .909 .909 .910 .910 .910 .910 .910 .910 .916 .924 .924 .924 .924 .926 . .926 . .926 . .925 . .925 . .925 . .925 . .925 . .925 . .925 . .925 . .925 . .925 . .925 . .925 . .925 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .926 . .924 . .925 . .925 . .925 . .925 Part No. Page C1HN49 C1HN50 C1HN52 C1HN53 C1HN55 C1HN56 C1HN58 C1HN59 C1HN60 C1HN61 C1HN62 C1HN63 C1HN64 C1HN65 C1HN66 C1HN67 C1HN68 C1HN70 C1HN73 C1HN74 C1HN75 C1HN76 C1HN79 C1HN80 C1HN81 C1HN82 C1HN83 C1HN84 C1HN85 C1HN86 C1HN87 C1HN88 C1HN89 C1HN90 C1HN91 C1HN92 C1HN93 C1HN94 C1HN95 C1HN96 C1HN97 C1HN98 C1HN99 C1HP11 C1HP12 C1HP13 C1HP14 C1HP15 C1HP16 C1HP17 C1HP18 C1HP19 C1HP20 C1HP21 C1HP22 C1HP23 C1HP24 C1HP25 C1HP26 C1HP27 C1HP28 C1HP29 C1HP30 . 925 . 792 . 916 . 966 . 216 . 729 1053 1053 1053 1053 1053 . 903 . 903 . 903 . 903 . 903 . 972 . 985 1055 1039 1039 1039 1038 1038 1038 1038 1038 1038 1038 1038 1038 1038 1037 1037 1037 1037 1037 1037 1037 1037 1037 1037 1037 1037 1037 1037 1039 1039 1039 1039 1039 1039 1039 1039 1037 1037 1037 1037 1037 1037 1037 1041 1041 Part No. Page C1HP31 C1HP32 C1HP33 C1HP34 C1HP35 C1HP36 C1HP37 C1HP38 C1HP39 C1HP40 C1HP41 C1HP42 C1HP43 C1HP45 C1HP46 C1HP47 C1HP48 C1HP49 C1HP50 C1HP51 C1HP52 C1HP53 C1HP54 C1HP55 C1HP56 C1HP57 C1HP58 C1HP59 C1HP60 C1HP61 C1HP62 C1HP63 C1HP64 C1HP65 C1HP66 C1HP67 C1HP68 C1HP69 C1HP70 C1HP71 C1HP72 C1HP73 C1HP74 C1HP75 C1HP76 C1HP77 C1HP78 C1HP79 C1HP80 C1HP82 C1HP83 C1HP84 C1HP85 C1HP86 C1HP88 C1HP89 C1HP90 C1HP91 C1HP92 C1HP93 C1HP94 C1HP95 C1HP96 .1041 .1041 .1041 .1041 .1041 .1041 .1041 .1042 .1042 .1042 .1042 .1042 .1054 .1054 .1042 .1042 .1042 . .722 .1042 .1042 .1042 .1042 .1042 .1042 .1042 .1042 .1042 .1043 .1043 .1043 .1043 .1049 .1049 .1049 .1049 .1049 .1054 .1054 .1054 .1054 .1054 .1054 .1054 .1049 .1049 .1049 .1049 .1049 .1049 . .902 . .902 . .902 . .902 .1049 .1049 .1049 .1049 .1049 .1051 .1051 .1048 .1045 .1045
Fluid Conveying
1324

Part No. Page C1HP97 .1045 C1HP98 .1045 C1HP99 .1045 C1HQ11 .1045 C1HQ12 .1045 C1HQ13 .1045 C1HQ14 .1045 C1HQ15 .1045 C1HQ17 .1045 C1HQ18 .1045 C1HQ19 .1045 C1HQ20 .1045 C1HQ21 .1045 C1HQ22 .1045 C1HQ23 .1045 C1HQ24 .1045 C1HQ25 .1045 C1HQ26 .1045 C1HQ27 .1045 C1HQ28 .1045 C1HQ29 .1047 C1HQ30 .1047 C1HQ31 .1047 C1HQ32 .1047 C1HQ33 .1046 C1HQ34 .1046 C1HQ35 .1046 C1HQ36 .1047 C1HQ37 .1046 C1HQ38 .1046 C1HQ39 .1046 C1HQ40 .1046 C1HQ41 .1047 C1HQ42 .1047 C1HQ43 .1047 C1HQ44 .1047 C1HQ45 .1047 C1HQ46 . 349, 350 C1HQ47 . 208, 222, 226, 232 C1HQ48 .1047 C1HQ49 .1047 C1HQ50 .1047 C1HQ53 .1046 C1HQ54 .1046 C1HQ56 .1046 C1HQ57 .1046 C1HQ58 .1046 C1HQ59 . 208, 216, 222, 226, . . . . 232, 236 C1HQ60 .1050 C1HQ64 . .904 C1HQ65 . .904 C1HQ66 . .904 C1HQ67 . .904 C1HQ68 . .904 C1HQ69 . .904 C1HQ70 . .904 C1HQ73 . .904 C1HQ74 . .904 C1HQ75 . .904 Part No. Page C1HQ76 . 904 C1HQ77 . 904 C1HQ78 . 904 C1HQ79 . 904 C1HQ81 . 904 C1HQ82 . 904 C1HQ83 . 904 C1HQ84 . 904 C1HQ85 . 904 C1HQ86 . 904 C1HQ87 . 904 C1HQ88 . 906 C1HQ89 . 906 C1HQ92 . 905 C1HQ94 . 973 C1HQ95 . 905 C1HQ96 . 905 C1HQ97 . 905 C1HQ98 . 905 C1HQ99 . 905 C1HR11 . 905 C1HR13 . 993 C1HR14 . 904 C1HR15 . 904 C1HR16 . 904 C1HR17 . 904 C1HR18 . 904 C1HR19 . 904 C1HR20 . 904 C1HR21 . 904 C1HR22 . 904 C1HR23 . 904 C1HR24 . 904 C1HR25 . 904 C1HR26 . 904 C1HR27 . 904 C1HR28 1221 C1HR29 . 905 C1HR30 . 905 C1HR31 . 905 C1HR32 . 905 C1HR33 . 905 C1HR34 . 905 C1HR35 . 905 C1HR36 . 905 C1HR37 . 905 C1HR38 . 905 C1HR39 . 905 C1HR40 . 905 C1HR41 . 905 C1HR45 . 906 C1HS71 . 352 C1HS73 1106 C1HT16 . 208, 221, . . . . . 225 C1HT29 . 223, 227, . . . . . 233 C1HT30 . . 217 C1HT94 . . 222 C1HT95 . 208, 226, . . . . . 232 C1HT99 . . 218 C1HU11 224, Part No. Page 228 C1HU12 . 233 C1HU13 . 237 C1HU16 . 224 C1HU17 . 218 C1HU18 . 224 C1HU20 . 218 C1HU21 . 224 C1HU22 . 218 C1HU24 . 224 C1HU27 . 224 C1HU30 . 224 C1HU38 . 228 C1HU39 . 233 C1HU41 . 228 C1HU43 . 233 C1HU46 . 233 C1HU49 . 233 C1HU54 . 228 C1HU56 . 233 C1HU58 . 233 C1HU61 . 237 C1HU62 . 237 C1HU72 . 207, 216 C1HU74 . 222 C1HU84 . 222 C1HU94 . 216 C1HU95 . 216 C1HU98 . 215 C1HV11 . 217 C1HV13 . 222 C1HV14 . 222 C1HV16 . 221 C1HV17 . 223 C1HV19 . 226 C1HV20 . 226 C1HV21 . 225 C1HV22 . 227 C1HV32 . 236 C1HV36 . 235 C1HV37 . 237 C1HV40 . 905 C1HV44 . 205 C1HV45 . 208 C1HV46 . 208 C1HV49 . 208 C1HV50 . 208 C1HV51 . 205 C1HV52 . 208 C1HV54 . 208 C1HV56 . 718 C1HV70 . 232 C1HV78 . 205, 206, . . . . 215 C1HW23 . 832 C1HW24 . 832 C1HW28 . 372 C1HW29 . 371 C1HW30 . 366, 367, . . . . 372 C1HW31 . 371 C1HW36 . 788 Part No. Page C1HW37 . 832 C1HW38 . 837 C1HW39 . 837 C1HW45 . 979 C1HW46 . 258 C1HW48 . 837 C1HW49 . 714 C1HW50 . 714 C1HW51 . 714 C1HW52 . 712 C1HW53 . 712 C1HW54 . 712 C1HW55 . 712 C1HW58 . 716 C1HW59 . 716 C1HW61 . 713 C1HW62 . 713 C1HW63 . 713 C1HW65 . 794 C1HW67 . 794 C1HW71 . 794 C1HW73 . 794 C1HW75 . 825 C1HW77 . 797 C1HW84 . 797 C1HW86 . 715 C1HW87 . 715 C1HW88 . 715 C1HW89 . 715 C1HW91 . 258 C1HW95 . 977 C1HW96 . 156 C1HW97 . 334 C1HX14 . . 939 C1HX17 . 1040 C1HX24 . . 945 C1HX25 . . 948 C1HX29 . 1235 C1HX31 . . 737 C1HX32 . . 737 C1HX34 . . 176 C1HX35 . . 176 C1HX36 . . 176 C1HX44 . . 966 C1HX45 . . 984 C1HX52 . . 716 C1HX53 . . 794 C1HX55 . . 795 C1HX56 . . 794 C1HX57 . . 794 C1HX58 . . 795 C1HX60 . . 794 C1HX61 . . 794 C1HX62 . . 794 C1HX63 . . 794 C1HX66 . . 794 C1HX67 . . 794 C1HX70 . . 377 C1HX77 . . 798 C1HX78 . . 994 C1HX79 . . 945 C1HX80 . . 942 C1HX81 . . 948 Part No. Page C1HX82 . 208 C1HY11 . 931 C1HY21 . 143 C1HY22 . 143 C1HY23 . 143 C1HY24 . 143 C1HY30 . 213 C1HY31 . 248 C1HY32 . 242 C1HY33 . 313 C1HY44 . 913 C1HY45 . 915 C1HY46 . 915 C1HY48 . 914 C1HY49 . 914 C1HY51 . 915 C1HY52 . 915 C1HY57 .366, 367, . . . . 372 C1HY58 .366, 367, . . . . 371 C1HY62 . 371 C1HY63 1040 C1HY72 1065 C1HY73 . 998 C1HY93 . 771 C1HZ18 . 967 C1HZ19 . 978 C1HZ23 . 990 C1HZ24 . 982 C1HZ26 . 958 C1HZ30 . 354 C1HZ33 . 714 C1HZ34 . 714 C1HZ40 . 716 C1HZ41 . 713 C1HZ44 . 713 C1HZ47 . 716 C1HZ48 . 716 C1HZ49 . 716 C1HZ50 . 716 C1HZ51 . . 86 C1HZ52 . 637 C1HZ53 . 637 C1HZ54 . 637 C1HZ55 . 637 C1HZ56 . 637 C1HZ57 . 794 C1HZ58 . 794 C1HZ60 . 795 C1HZ61 . 795 C1HZ63 . 794 C1HZ64 . 795 C1HZ66 . 795 C1HZ67 . 795 C1HZ68 . 794 C1HZ70 . 795 C1HZ72 . 795 C1HZ73 . 794 C1HZ75 . 795 C1HZ84 . 208 C1HZ85 . 115 C1HZ89 . 328 Part No. Page C1HZ91 C1HZ92 C1HZ95 C1HZ99 C1JA16 C1JA21 C1JA23 C1JA25 C1JA26 C1JA28 C1JA36 C1JA38 C1JA44 C1JA49 1104 C1JA50 C1JA56 C1JA57 C1JA65 C1JA67 C1JA70 C1JA71 C1JA72 C1JA76 C1JA77 C1JA78 C1JA81 C1JA94 C1JA99 C1JB11 C1JB12 C1JB13 C1JB14 C1JB19 C1JB20 C1JB21 C1JB22 C1JB23 C1JB26 C1JB27 C1JB31 C1JB32 C1JB37 C1JB38 C1JB41 C1JB44 C1JB67 C1JB68 C1JB72 C1JB77 C1JB78 C1JB79 C1JB81 C1JB83 C1JB84 C1JB85 C1JB86 C1JB88 C1JB89 C1JB95 C1JB97 C1JC13 C1JC15 .1076 . .144 . .377 . .335 . .319 . .153 . .795 . .796 . .795 . .796 .1015 .1236 . .386 1103, .1137 . .910 . .910 . .942 . .948 . .945 . .945 . .945 . .942 . .942 . .942 . .948 . .717 . .910 . .910 . .910 . .910 . .910 . .910 . .910 . .911 . .896 .1008 . .910 . .827 . .910 . .910 . .827 . .828 . .352 . .357 . .883 . .883 . .395 . .211 .1240 . .104 . .104 . .104 . .104 . .104 . .104 . .105 . .105 . .139 . .915 . .371 . . .91 Part No. Page C1JC18 . . 140 C1JC19 . . 100 C1JC24 . . 986 C1JC25 . . 955 C1JC26 . 1247 C1JC28 91, 93 C1JC29 . . 990 C1JC33 . . 975 C1JC34 . . 958 C1JC36 . . 972 C1JC39 . . 164 C1JC41 . . 136 C1JC42 . . 843 C1JC43 . . 843 C1JC46 . . 794 C1JC47 . . 213 C1JC48 . 1016 C1JC50 . 208, 226, . . . . 232 C1JC53 . . 164 C1JC54 . . 990 C1JC62 . . 862 C1JC63 . 1011 C1JC65 . . 137 C1JC76 . 1058 C1JC81 . 1002 C1JC84 . . 942 C1JC90 . 1077 C1JC95 . 1040 C1JC96 . 1040 C1JC97 . 1040 C1JC99 . 1236 C1JD11 . . 771 C1JD14 . . 771 C1JD15 . . 211 C1JD16 . . 211 C1JD17 . 1035 C1JD18 . . 771 C1JD19 . . 771 C1JD20 . . 771 C1JD21 . . 771 C1JD23 . . 771 C1JD24 . . 771 C1JD25 . . 771 C1JD27 . . 763 C1JD28 . . 783 C1JD29 . . 785 C1JD33 . 1237 C1JD34 . . 371 C1JD36 . . 163 C1JD39 . . 105 C1JD41 . . 771 C1JD42 . . 144 C1JD43 . . 794 C1JD52 . 1232 C1JD62 . . 117 C1JD67 . 1011 C1JD73 . 1017 C1JD75 . . 712 C1JD78 . 367, 372 C1JD80 . . 752 C1JD81 . . 752 Part No. Page C1JD82 C1JD87 C1JD88 C1JD89 C1JD90 C1JD92 C1JD95 C1JD96 C1JD97 C1JD98 C1JD99 C1JE39 C1JE42 C1JE44 C1JE45 C1JE59 C1JE68 C1JE69 C1JE70 C1JE78 C1JE82 C1JE95 C1JE96 C1JE97 C1JE98 C1JF11 C1JF14 C1JF16 C1JF23 C1JF24 1150 C1JF26 C1JF33 C1JF35 C1JF37 C1JF38 C1JF40 C1JF42 C1JF44 C1JF46 C1JF51 C1JF53 C1JF54 C1JF55 C1JF56 C1JF59 C1JF69 C1JF70 C1JF71 C1JF76 C1JF81 C1JF87 C1JG22 C1JG23 C1JG24 C1JG25 C1JG26 C1JG27 C1JG28 C1JG29 C1JG30 C1JG31 C1JG33 . .155 . .328 .1108 .1106 . .155 .1228 .1085 .1085 .1085 .1085 .1085 . .865 . .376 .1232 . .155 . .155 . .899 .1027 . .894 . .156 .1247 . .327 .1232 .1232 . .324 .1107 . .336 .1232 . .743 1081, . .997 .1232 .1232 . .369 . .749 . .989 . .163 . .749 . .994 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 .1003 . .947 . .749 . .749 . .757 . .757 . .757 . .757 . .757 . .757 . .757 . .757 . .757 . .757
1325

Part No. Page C1JG34 C1JG37 C1JG39 C1JG40 C1JG41 C1JG43 C1JG44 C1JG45 C1JG51 C1JG52 C1JG53 C1JG54 C1JG55 C1JG56 C1JG59 C1JG60 C1JG61 C1JG65 C1JG66 C1JG68 C1JG70 C1JG73 C1JG74 C1JG75 C1JG76 C1JG77 C1JG78 C1JG79 C1JG80 C1JG82 C1JG83 C1JG89 C1JG90 C1JG91 C1JG92 C1JG93 C1JG94 C1JG95 C1JG96 C1JG97 C1JG98 C1JH12 C1JH13 C1JH14 C1JH15 C1JH16 C1JH18 C1JH19 C1JH20 C1JH21 C1JH22 C1JH25 C1JH26 C1JH27 C1JH28 C1JH29 C1JH30 C1JH31 C1JH32 C1JH33 C1JH34 C1JH35 C1JH36 . .749 . .206 . .376 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .749 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 . .747 Part No. Page C1JH37 C1JH38 C1JH41 C1JH42 C1JH43 C1JH44 C1JH45 C1JH47 C1JH48 C1JH49 C1JH50 C1JH51 C1JH56 C1JH57 C1JH59 C1JH62 C1JH66 C1JH67 C1JH69 C1JH75 C1JH76 C1JH77 C1JH78 C1JH79 C1JH80 C1JH81 C1JH82 C1JH84 C1JH85 C1JH86 C1JH87 C1JH88 C1JH97 C1JH99 C1JJ11 C1JJ17 C1JJ20 C1JJ21 C1JJ31 C1JJ34 C1JJ35 C1JJ39 C1JJ40 C1JJ41 C1JJ42 C1JJ44 C1JJ45 C1JJ46 C1JJ48 C1JJ56 C1JJ57 C1JJ58 C1JJ62 C1JJ66 C1JJ67 C1JJ68 C1JJ69 C1JJ70 C1JJ71 C1JJ72 C1JJ73 C1JJ74 C1JJ75 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 747 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 394 . . 748 . . 108 . . 827 . . 748 . . 748 . 1156 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 . . 748 Part No. Page C1JJ76 C1JJ77 C1JJ78 C1JJ79 C1JJ80 C1JJ81 C1JJ82 C1JJ83 C1JJ84 C1JJ85 C1JJ86 C1JJ87 C1JJ88 C1JJ89 C1JJ90 C1JJ91 C1JJ92 C1JJ93 C1JJ94 C1JJ95 C1JJ96 C1JJ97 C1JJ98 C1JJ99 C1JK11 C1JK12 C1JK13 C1JK14 C1JK15 C1JK16 C1JK17 C1JK18 C1JK19 C1JK20 C1JK21 C1JK22 C1JK23 C1JK24 C1JK25 C1JK26 C1JK27 C1JK28 C1JK29 C1JK30 C1JK31 C1JK32 C1JK33 C1JK34 C1JK83 C1JK84 C1JK85 C1JK86 C1JK87 C1JK88 C1JK89 C1JK90 C1JK91 C1JK92 C1JK93 C1JK94 C1JK95 C1JK96 C1JK97 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 748 703 703 703 703 703 703 703 703 703 703 703 703 703 703 710 Part No. Page C1JK98 C1JK99 C1JL11 C1JL12 C1JL13 C1JL15 C1JL16 C1JL17 C1JL18 C1JL19 C1JL20 C1JL21 C1JL22 C1JL23 C1JL24 C1JL25 C1JL26 C1JL27 C1JL28 C1JL29 C1JL30 C1JL31 C1JL32 C1JL33 C1JL34 C1JL35 C1JL36 C1JL37 C1JL38 C1JL39 C1JL43 C1JL48 C1JL49 C1JL52 C1JL58 C1JL59 C1JL72 C1JL75 C1JL78 C1JL81 C1JL86 C1JL96 C1JL97 C1JM12 C1JM15 C1JM19 C1JM20 C1JM27 C1JM28 C1JM35 C1JM36 C1JM38 C1JM45 C1JM47 C1JM54 C1JM55 C1JM56 C1JM59 C1JM62 C1JM63 C1JM65 C1JM66 C1JM71 . . 710 . . 710 . . 710 . . 710 . . 710 . . 710 . . 710 . . 710 . . 702 . . 702 . . 702 . . 702 . . 702 . . 702 . . 702 . . 702 . . 702 . . 702 . . 706 . . 706 . . 706 . . 706 . . 706 . . 706 . . 706 . . 706 . . 706 . . 706 . . 706 . . 706 . . 140 . . 230 . . 321 . . 332 . . 348 . . 266 . . 939 . . 141 . . 887 . . 369 . . 888 . . 778 . . 778 . . 714 . . 104 . . 403 . . 156 . . . 86 . . 155 . 1232 . . 140 . . 156 . 1078 . . 156 . . 179 . . 179 . . 311 . . 176 . . 112 . 1055 . . 117 . . 117 . 1106 Part No. Page C1JM72 1106 C1JM73 1107 C1JM74 1107 C1JM78 . 395 C1JM79 1106 C1JM93 . 422 C1JM94 1015 C1JM96 . 422 C1JM98 . 433 C1JM99 1232 C1JN11 . 128 C1JN12 . 433 C1JN15 . 425 C1JN16 . 425 C1JN18 . 411 C1JN19 . 423 C1JN20 . 423 C1JN21 . 424 C1JN22 . 421 C1JN23 . 421 C1JN24 . 421 C1JN25 . 421 C1JN26 . 421 C1JN27 . 421 C1JN28 . 422 C1JN29 . 422 C1JN30 . 422 C1JN34 . 337 C1JN36 . 853 C1JN40 . 220 C1JN41 . 407 C1JN42 . 407 C1JN45 . 406 C1JN47 . 406 C1JN48 . 406 C1JN49 . 406 C1JN52 . 407 C1JN54 . 407 C1JN56 . 407 C1JN57 . 407 C1JN59 . 407 C1JN60 . 407 C1JN61 . 407 C1JN63 . 406 C1JN64 . 406 C1JN65 . 407 C1JN67 . 407 C1JN68 . 407 C1JN69 . 406 C1JN70 . 406 C1JN77 . 777 C1JN78 . 778 C1JN81 . 778 C1JN84 . 852 C1JN85 . 852 C1JN86 . 852 C1JN91 . 852 C1JN92 . 852 C1JN98 . 436 C1JP24 . 1249 C1JP25 . 1251 C1JP26 . 1256 C1JP27 . 1257 Part No. Page C1JP28 C1JP29 C1JP30 C1JP31 C1JP32 C1JP33 C1JP34 C1JP35 C1JP39 C1JP40 C1JP41 C1JP46 C1JP54 C1JP55 C1JP56 C1JP76 C1JP80 C1JP83 C1JP84 C1JP86 C1JP87 C1JP92 C1JP93 C1JP94 C1JP95 C1JP96 C1JP97 C1JP98 C1JQ11 C1JQ12 C1JQ14 C1JQ15 C1JQ18 C1JQ21 C1JQ22 C1JQ24 C1JQ27 C1JQ29 C1JQ30 C1JQ31 C1JQ32 C1JQ34 C1JQ35 C1JQ37 C1JQ38 C1JQ42 C1JQ43 C1JQ44 C1JQ50 C1JQ52 C1JQ54 C1JQ55 C1JQ57 C1JQ58 C1JQ59 C1JQ60 C1JQ61 C1JQ62 C1JQ63 C1JQ64 C1JQ65 C1JQ67 C1JQ68 .1257 .1258 .1258 .1258 .1258 .1258 .1258 .1258 . .853 . .853 . .396 . .220 . .220 . .230 . .220 . .937 . .263 .1235 .1252 . .269 . .262 . .412 . .414 . .414 . .413 . .413 . .108 . .414 . .414 . .414 . .413 . .413 . .415 . .416 . .416 . .416 . .417 . .418 . .418 . .418 . .418 . .418 . .430 . .420 . .420 . .435 . .435 . .427 . .410 . .410 . .410 . .409 . .409 . .409 . .409 . .407 . .408 . .407 . .407 . .407 . .407 . .408 . .408 Part No. Page C1JQ69 C1JQ70 C1JQ71 C1JQ77 C1JQ78 C1JQ80 C1JQ82 C1JQ85 C1JQ87 C1JQ88 C1JQ90 C1JQ95 C1JQ96 C1JQ97 C1JQ98 C1JQ99 C1JR11 C1JR12 C1JR13 C1JR15 C1JR22 C1JR28 C1JR29 C1JR30 C1JR31 C1JR37 C1JR40 C1JR43 C1JR45 C1JR48 C1JR54 C1JR55 C1JR57 C1JR58 C1JR59 C1JR67 C1JR68 C1JR69 C1JR70 C1JR79 C1JR82 C1JR83 C1JR91 C1JR92 C1JR98 C1JS14 C1JS15 C1JS16 C1JS17 C1JS18 C1JS19 C1JS20 C1JS21 C1JS23 C1JS24 C1JS25 C1JS27 C1JS29 C1JS30 C1JS43 C1JS44 C1JS52 C1JS53 . . 408 . . 408 . . 408 . . 425 . . 745 . . 745 . . 745 . . 745 . . 745 . . 745 . 1014 . 1089 . 1089 . 1089 . 1085 . 1087 . 1087 . 1087 . 1086 . 1086 . . 199 . . 110 . 1103 . 1231 . . 110 . . 432 . . 432 . . 432 . . 432 . . 778 . . 990 . . 158 . . 158 . . 158 . . 158 . . 873 . . 873 . 1235 . . 173 . . 349 . . 233 . . 226 . . 431 . . 431 . . 268 . . 155 . . 424 . . 424 . . 424 . . 424 . . 424 . . 424 . . 424 . . 170 . . 170 . . 170 . . 280 . . 999 . . 852 . . 999 . . 942 . . 434 . . 434 Part No. Page C1JS55 C1JS56 C1JS57 C1JS58 C1JS62 C1JS66 C1JS67 C1JS68 C1JS71 C1JS73 C1JS78 C1JS87 C1JS88 C1JS89 C1JS96 C1JT27 C1JT32 C1JT36 C1JT40 C1JT43 C1JT44 C1JT48 C1JT71 C1JT72 C1JU43 C1JU52 C1JU81 C1JU89 C1JU96 C1JU97 C1JU99 C1JV15 C1JV18 C1JV28 C1JV32 C1JV90 C1JV95 C1JW13 C1JW15 C1JW21 C1JW28 C1JW30 C1JW38 C1JW39 C1JW40 C1JW43 C1JW45 C1JW47 C1JW48 C1JW50 C1JW51 C1JW53 C1JW54 C1JW64 C1JW71 C1JW75 C1JW96 C1JW97 C1JX24 C1JX28 C1JX29 C1JX44 C1JX45 . .437 . .436 . .427 . .427 . .827 . .409 . .408 . .352 . .140 . .426 . .113 . .389 . .388 . .388 . .261 . .283 . .269 . .388 . .270 . .269 . .269 . .269 . .262 . .262 . .193 . .388 . .388 . .388 . .388 . .389 . .389 . .110 . .388 . .388 . .109 . .390 . .389 . .389 . .133 . .133 . .389 . .136 . .389 . .139 . .139 . .139 . .140 . .139 . .139 . .389 . .140 . .139 . .139 . .388 . .390 . .141 . .142 . .389 . .143 . .135 . .135 . .113 . .113
Fluid Conveying
1326

Part No. Page C1JX46 . .113 C1JX50 . .390 C1JX52 . .389 C1JX53 . .164 C1JX54 . .157 C1JX55 . .157 C1JX56 . .157 C1JX62 . .162 C1JX83 . .389 C1JX86 . .389 C1JX94 . .158 C1JX95 . .280 C1JX96 . .106 C1JX97 . .105 C1JX98 . .105 C1JY11 . .106 C1JY12 . .106 C1JY29 . .104 C1JY31 . .105 C1JY32 . .105 C1JY34 . .105 C1JY36 . .105 C1JY54 . .389 C1JY56 . .158 C1JY57 . .158 C1JY58 . .332 C1JY59 . .332 C1JY60 . .332 C1JY61 . .332 C1JY62 . .332 C1JY63 . .332 C1JY66 . .158 C1JY67 . .158 C1JY88 . .276 C1JZ17 . . .90 C1JZ18 91, 93 C1JZ30 . .389 C1JZ31 . . .90 C1JZ34 . . .90 C1JZ38 87, 89 C1JZ50 . . .86 C1JZ57 . 736, 874 C1JZ75 . .185 C1JZ78 . .188 C1JZ80 . .190 C1JZ81 . .196 C1JZ82 . .197 C1JZ83 . .191 C1JZ84 . .192 C1JZ85 . .194 C1JZ86 . .198 C1JZ87 . .201 C1JZ91 . .201 C1JZ92 . .189 C1JZ95 . .190 C1JZ96 . .196 C1JZ98 . .197 C1KA11 . .125 C1KA17 . . .97 C1KA18 . .764 C1KA19 . .306 C1KA24 . .390 Part No. Page C1KA28 C1KA32 C1KA33 874 C1KA35 C1KA38 874 C1KA40 C1KA45 C1KA48 C1KA62 C1KA63 C1KA64 C1KA65 C1KA74 C1KA76 C1KA80 C1KA91 C1KB13 C1KB15 C1KB35 874 C1KB36 C1KB62 C1KB65 C1KB69 C1KB76 C1KB88 C1KB96 C1KC15 C1KC44 C1KC47 C1KC84 C1KC89 C1KC90 C1KC97 C1KC99 C1KD14 C1KD18 C1KD19 C1KD25 C1KD34 C1KD37 C1KD43 C1KD57 C1KD62 C1KD70 C1KD71 C1KD79 C1KD81 C1KD85 C1KD96 C1KD98 C1KD99 C1KE20 C1KE30 C1KE40 C1KE43 C1KE61 C1KE81 C1KE82 C1KE86 C1KE87 . . 390 . . 286 . 736, . . . 98 . 736, . . 157 . . 157 . . 992 . . 115 . . 115 . . 115 . . 115 . . 109 . . 389 . . . 97 . . 389 . . 977 . . 273 . 737, . . 389 . . 262 . . 283 . . 177 . . 390 . . 157 . . 390 . 390 . 273 . 274 . 390 . 390 . 390 . 112 . 113 . 153 . 153 . 153 . 153 . 150 . 390 . 150 . 113 . 112 . 348 . 389 . 150 . 150 . 150 . 261 . 261 . 262 . . 262 . 1236 . . 270 . . 264 . 1109 . . 271 . 1221 . . 270 . . 270 Part No. Page C1KF25 . 289 C1KF32 . 118 C1KF36 . 109 C1KF37 . 109 C1KF58 . 118 C1KF74 . 379 C1KF76 . 233 C1KF80 1025 C1KF81 1026 C1KF85 1025 C1KF86 1025 C1KF95 . 118 C1KF97 . 900 C1KF98 . 158 C1KF99 . 900 C1KG11 . 898 C1KG12 . 158 C1KG13 . 898 C1KG14 . 898 C1KG15 . 899 C1KG16 . 896 C1KG17 . 900 C1KG18 . 899 C1KG20 . 741 C1KG21 . 741 C1KG22 . 741 C1KG23 1029 C1KG24 1029 C1KG25 1029 C1KG26 1029 C1KG27 . 741 C1KG28 . 741 C1KG30 1184 C1KG31 1024 C1KG36 1024 C1KG37 1024 C1KG40 . 345 C1KG41 . 421, 428, . . . . 429 C1KG42 . 421, 428, . . . . 429 C1KG43 . 421, 428, . . . . 429 C1KG46 . 429 C1KG47 . 429 C1KG51 . 428 C1KG52 . 428 C1KG56 . 741 C1KG57 . 741 C1KG59 . 741 C1KG60 . 742 C1KG73 1109 C1KG75 1088 C1KG78 . 115 C1KG79 . 802 C1KG83 1222 C1KG86 . 656 C1KG87 . 656 C1KG88 1236 C1KG89 . 657 C1KG90 . 826 C1KG91 . 826 C1KG94 1222 Part No. Page C1KG96 C1KG97 C1KG98 C1KG99 C1KH11 C1KH12 C1KH13 C1KH14 C1KH15 C1KH16 C1KH19 C1KH33 C1KH35 C1KH37 C1KH39 C1KH40 C1KH42 C1KH43 C1KH44 C1KH45 C1KH46 C1KH47 C1KH48 C1KH51 C1KH52 C1KH53 C1KH54 C1KH55 C1KH56 C1KH58 C1KH60 C1KH61 C1KH62 C1KH63 C1KH64 C1KH65 C1KH66 C1KH67 C1KH73 C1KH82 C1KH84 660 C1KH86 C1KH87 C1KH88 C1KH90 C1KH91 C1KH98 C1KH99 C1KJ11 C1KJ12 C1KJ13 C1KJ14 C1KJ15 C1KJ16 C1KJ17 C1KJ18 C1KJ20 C1KJ21 C1KJ22 C1KJ23 C1KJ24 C1KJ25 . . 741 . . 741 . . 741 . . 741 . . 741 . . 741 . . 742 . . 742 . . 742 . . 742 . . 702 . . 660 . 1184 . . 142 . . 659 . . 659 . . 658 . . 658 . . 658 . . 658 . . 658 . . 384 . . 376 . . 375 . . 402 . . 402 . . 383 . . 383 . . 383 . . 843 . 1233 . 1233 . 1233 . 1233 . 1233 . 1233 . 1233 . 1233 . 1222 . . 432 . 658, . . 419 . . 419 . . 419 . . 432 . . 432 . . 772 . . 772 . . 774 . . 773 . . 772 . . 767 . . 767 . . 769 . . 767 . . 764 . . 767 . . 764 . . 763 . . 767 . . 767 . . 764 Part No. Page C1KJ26 . . 763 C1KJ27 . . 767 C1KJ28 . . 767 C1KJ29 . . 764 C1KJ30 . . 786 C1KJ31 . . 787 C1KJ32 . . 785 C1KJ33 . . 786 C1KJ34 . . 787 C1KJ35 . . 788 C1KJ36 . . 788 C1KJ37 . . 785 C1KJ38 . . 786 C1KJ39 . . 786 C1KJ40 . . 789 C1KJ41 . . 785 C1KJ42 . . 785 C1KJ43 . . 788 C1KJ44 . . 788 C1KJ45 . . 788 C1KJ46 . . 785 C1KJ47 . . 157 C1KJ48 . . 966 C1KJ49 . . 158 C1KJ50 . . 158 C1KJ53 . . 158 C1KJ55 . . 903 C1KJ56 . . 162 C1KJ61 . . 979 C1KJ62 . . 419 C1KJ63 . . 158 C1KJ64 . . 158 C1KJ65 . . 426 C1KJ66 . . 426 C1KJ70 . .658, 659 C1KJ71 . . 168 C1KJ72 . . 168 C1KJ76 . . 426 C1KJ77 . . 426 C1KJ78 . . 332 C1KJ79 . . 332 C1KJ80 . . 332 C1KJ81 . . 332 C1KJ85 . . 158 C1KJ86 . . 158 C1KJ87 . . 158 C1KJ90 . . 158 C1KJ91 . . 158 C1KJ93 . 1252 C1KJ98 . . 158 C1KJ99 . . 158 C1KK11 . 158 C1KK12 . 158 C1KK13 . 158 C1KK14 . 158 C1KK15 . 350 C1KK17 1042 C1KK18 . 814 C1KK19 1222 C1KK21 . 158 C1KK22 . 158 C1KK23 . 158 Part No. Page C1KK24 C1KK26 C1KK27 C1KK28 C1KK29 C1KK31 C1KK33 C1KK35 C1KK36 C1KK42 C1KK43 C1KK46 C1KK48 C1KK49 C1KK52 C1KK53 C1KK54 C1KK55 C1KK57 C1KK58 C1KK59 C1KK60 C1KK61 C1KK62 C1KK63 C1KK68 C1KK69 C1KK70 C1KK71 C1KK72 C1KK73 C1KK74 C1KK75 C1KK76 C1KK77 C1KK78 C1KK79 C1KK80 C1KK82 C1KK83 C1KK85 C1KK86 C1KK88 C1KK90 C1KK93 C1KK94 C1KK96 C1KK97 C1KK98 C1KK99 C1KL11 C1KL13 C1KL14 C1KL15 C1KL16 C1KL17 C1KL18 C1KL19 C1KL20 C1KL21 C1KL22 C1KL23 C1KL24 . .158 .1222 .1222 . .158 .1222 . .144 . .419 . .115 . .328 . .953 .1249 . .308 .1198 .1198 .1182 .1182 .1182 .1182 .1182 .1182 . .232 . .232 . .232 . .231 .1232 . .112 . .100 . .117 . .117 . .117 . .117 . .117 . .431 . .431 . .431 . .431 . .431 . . .90 . .425 . .388 .1222 . .437 .1106 .1011 .1011 . .422 . .422 . .422 . .422 . .422 . .423 . .425 . .424 . .424 . .421 . .421 . .421 . .421 . .421 . .421 . .421 .1194 .1194 Part No. Page C1KL25 . 1091 C1KL26 . 1091 C1KL27 . 1091 C1KL28 . 1091 C1KL29 . 1091 C1KL30 . . 170 C1KL34 . . 656 C1KL35 . . 656 C1KL36 . . 406 C1KL39 . . 280 C1KL42 . . 876 C1KL43 . . 876 C1KL44 . . 876 C1KL45 . . 738 C1KL46 . . 738 C1KL47 . . 657 C1KL48 . . 657 C1KL49 . . 657 C1KL50 . . 657 C1KL51 . . 657 C1KL52 . . 657 C1KL53 . 1128 C1KL54 . 1120 C1KL55 . 1120 C1KL57 . 1120 C1KL58 . 1120 C1KL59 . 1120 C1KL60 . 1120 C1KL61 . 1121 C1KL62 . 1121 C1KL63 . 1121 C1KL64 . 1121 C1KL65 . 1137 C1KL66 . 1137 C1KL69 . 1137 C1KL70 . 1137 C1KL71 . 1137 C1KL72 . 1138 C1KL73 . 1138 C1KL74 . 1138 C1KL76 . 1138 C1KL77 . 1138 C1KL78 . 1138 C1KL79 . . 170 C1KL80 . . 170 C1KL81 . . 710 C1KL82 . . 710 C1KL83 . . 710 C1KL84 . . 710 C1KL85 . . 710 C1KL88 . 1076 C1KL89 . 1077 C1KL90 . 1077 C1KL92 . . 752 C1KL93 . . 741 C1KL94 . . 741 C1KL95 . . 741 C1KL96 . . 741 C1KL97 . . 742 C1KL98 . 1111 C1KL99 . . 317 C1KM12 . 701 C1KM13 . 701 Part No. Page C1KM14 C1KM15 C1KM16 C1KM17 C1KM18 C1KM19 C1KM20 C1KM22 C1KM23 C1KM24 C1KM60 C1KM61 C1KM62 C1KM63 C1KM65 C1KM66 C1KM70 C1KM71 C1KM74 C1KM75 C1KM76 C1KM81 C1KM82 C1KM84 C1KM86 C1KM87 C1KM88 C1KM89 C1KM90 C1KM93 C1KM94 C1KM95 C1KM96 C1KM97 C1KM98 C1KM99 C1KN11 C1KN14 C1KN15 C1KN18 C1KN19 C1KN32 C1KN33 C1KN34 C1KN35 C1KN36 C1KN37 C1KN38 C1KN39 C1KN40 C1KN41 C1KN42 C1KN43 C1KN44 C1KN45 C1KN46 C1KN47 C1KN48 C1KN49 C1KN50 C1KN51 C1KN52 C1KN54 . .875 . .875 . .875 . .717 . .717 . .875 . .875 . .430 . .410 . .410 . .899 . .900 .1030 .1033 .1033 .1009 . .660 . .660 .1184 .1184 .1184 . .667 . .375 . .414 . .659 . .659 . .108 . .430 . .435 .1189 .1189 .1190 .1190 .1190 .1190 .1190 .1191 . .658 . .658 . .425 . .425 . .402 . .376 . .376 . .402 . .402 . .402 . .402 . .402 . .402 .1108 .1102 .1108 .1103 .1103 .1103 .1103 .1103 .1103 .1106 .1106 . .389 . .844
1327

Part No. Page C1KN55 C1KN56 C1KN57 C1KN58 C1KN61 C1KN62 C1KN63 C1KN64 C1KN66 C1KN68 C1KN69 C1KN70 C1KN71 C1KN72 C1KN74 C1KN75 C1KN76 C1KN84 C1KN85 C1KN86 C1KN87 C1KN88 C1KN89 C1KN90 C1KN92 C1KN93 C1KN94 C1KN96 C1KN97 C1KN98 C1KN99 C1KP11 C1KP12 C1KP13 C1KP14 C1KP15 C1KP16 C1KP17 C1KP18 C1KP19 C1KP21 C1KP22 C1KP23 C1KP24 C1KP25 C1KP26 C1KP27 C1KP28 C1KP29 C1KP30 C1KP31 C1KP32 C1KP33 C1KP34 C1KP35 C1KP36 C1KP37 C1KP38 C1KP39 C1KP40 C1KP41 C1KP42 C1KP43 . .844 .1092 .1092 .1092 . .873 . .873 . .873 . .873 .1178 .1093 .1093 . .725 . .725 . .725 . .122 .1087 . .232 . .407 . .423 .1003 . .423 . .424 . .424 . .424 . .409 . .409 . .409 . .942 . .942 . .942 . .942 . .943 . .943 . .943 . .943 . .943 . .978 . .978 . .978 . .978 . .978 . .978 . .978 . .978 . .978 . .978 . .978 . .982 . .982 . .982 . .982 . .997 . .997 . .997 . .997 . .998 . .998 .1004 . .962 . .962 . .962 . .962 . .962 Part No. Page C1KP44 . . 962 C1KP45 . . 962 C1KP46 . . 962 C1KP47 . . 962 C1KP48 . . 962 C1KP49 . . 962 C1KP50 . . 962 C1KP51 . . 962 C1KP52 . . 962 C1KP53 . . 962 C1KP54 . . 962 C1KP55 . . 963 C1KP56 . . 962 C1KP57 . . 962 C1KP58 . . 963 C1KP59 . . 963 C1KP60 . . 962 C1KP61 . . 963 C1KP62 . . 963 C1KP63 . . 963 C1KP64 . . 963 C1KP65 . . 963 C1KP66 . . 963 C1KP67 . . 963 C1KP68 . . 966 C1KP69 . . 966 C1KP70 . . 966 C1KP71 . . 966 C1KP72 . . 966 C1KP73 . . 966 C1KP74 . . 967 C1KP75 . . 967 C1KP76 . . 967 C1KP77 . . 967 C1KP79 . . 969 C1KP80 . . 967 C1KP81 . . 968 C1KP82 . . 968 C1KP83 . . 967 C1KP84 . . 967 C1KP85 . . 968 C1KP86 . . 968 C1KP87 . . 968 C1KP88 . . 968 C1KP89 . . 968 C1KP90 . . 968 C1KP91 . . 968 C1KP92 . . 968 C1KP93 . . 968 C1KP94 . . 968 C1KP95 . . 968 C1KP96 . . 968 C1KP97 . . 968 C1KP98 . . 968 C1KP99 . . 968 C1KQ11 . 968 C1KQ12 . 969 C1KQ13 . 969 C1KQ14 . 969 C1KQ15 . 969 C1KQ16 . 969 C1KQ17 . 988 C1KQ18 . 988 Part No. Page C1KQ19 C1KQ20 C1KQ21 C1KQ22 C1KQ23 C1KQ24 C1KQ25 C1KQ26 C1KQ27 C1KQ28 C1KQ29 C1KQ30 C1KQ31 C1KQ32 C1KQ33 C1KQ34 C1KQ35 C1KQ36 C1KQ37 C1KQ38 C1KQ39 C1KQ40 C1KQ41 C1KQ42 C1KQ43 C1KQ44 C1KQ45 C1KQ46 C1KQ47 C1KQ48 C1KQ49 C1KQ50 C1KQ51 C1KQ52 C1KQ53 C1KQ54 C1KQ55 C1KQ56 C1KQ57 C1KQ58 C1KQ59 C1KQ60 C1KQ61 C1KQ62 C1KQ63 C1KQ64 C1KQ65 C1KQ66 C1KQ67 C1KQ68 C1KQ69 C1KQ70 C1KQ71 C1KQ72 C1KQ73 C1KQ74 C1KQ75 C1KQ76 C1KQ77 C1KQ78 C1KQ79 C1KQ80 C1KQ81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 988 988 988 988 988 988 988 988 988 988 989 988 988 989 988 988 988 989 989 989 989 989 989 989 989 989 989 989 989 990 990 990 990 990 991 991 991 991 991 992 991 991 991 992 992 992 991 991 992 991 991 991 992 992 992 992 992 992 992 992 992 950 950 Part No. Page C1KQ82 C1KQ83 C1KQ84 C1KQ85 C1KQ86 C1KQ87 C1KQ88 C1KQ89 C1KQ90 C1KQ91 C1KQ92 C1KQ93 C1KQ94 C1KQ95 C1KQ96 C1KQ97 C1KQ98 C1KQ99 C1KR11 C1KR12 C1KR13 C1KR14 C1KR15 C1KR16 C1KR17 C1KR18 C1KR19 C1KR20 C1KR21 C1KR22 C1KR23 C1KR24 C1KR26 C1KR27 C1KR28 C1KR29 C1KR30 C1KR31 C1KR32 C1KR33 C1KR34 C1KR35 C1KR36 C1KR37 C1KR38 C1KR39 C1KR40 C1KR41 C1KR42 C1KR43 C1KR44 C1KR45 C1KR46 C1KR47 C1KR48 C1KR49 C1KR50 C1KR51 C1KR52 C1KR53 C1KR54 C1KR55 C1KR56 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 950 . . 956 . . 956 . . 956 . . 956 . . 956 . . 948 . . 979 . . 980 . . 979 . . 980 . . 980 . . 980 . . 981 . . 981 . . 981 . . 981 . . 981 . . 981 . . 981 . . 982 . . 982 . . 983 . . 983 . . 983 . . 983 . . 966 . . 966 . . 966 . . 966 . . 966 . . 966 . . 953 . . 953 . . 953 . . 953 . . 953 . . 954 . . 954 . . 954 . . 954 . . 955 . . 955 . . 955 . . 957 . . 957 . . 957 . . 958 . . 958 . . 958 . . 990 Part No. Page C1KR57 C1KR58 C1KR59 C1KR60 C1KR61 C1KR62 C1KR63 C1KR64 C1KR65 C1KR66 C1KR67 C1KR68 C1KR69 C1KR70 C1KR71 C1KR72 C1KR73 C1KR74 C1KR75 C1KR76 C1KR77 C1KR78 C1KR79 C1KR81 C1KR82 C1KR83 C1KR84 C1KR85 C1KR86 C1KR87 C1KR88 C1KR89 C1KR90 C1KR91 C1KR92 C1KR93 C1KR94 C1KR95 C1KR96 C1KR97 C1KR98 C1KR99 C1KS11 C1KS12 C1KS13 C1KS14 C1KS15 C1KS16 C1KS17 C1KS18 C1KS19 C1KS20 C1KS21 C1KS23 C1KS24 C1KS25 C1KS27 C1KS28 C1KS29 C1KS30 C1KS31 C1KS32 C1KS33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990 990 990 990 975 949 949 949 949 949 949 949 987 987 987 987 987 987 987 987 987 952 952 952 952 952 952 952 995 995 995 995 995 995 995 995 995 995 995 980 980 980 980 980 980 980 980 980 980 964 964 964 964 965 965 965 970 952 951 952 951 952 951 Part No. Page C1KS34 C1KS35 C1KS36 C1KS37 C1KS38 C1KS39 C1KS40 C1KS41 C1KS42 C1KS43 C1KS44 C1KS45 C1KS46 C1KS47 C1KS48 C1KS49 C1KS50 C1KS51 C1KS52 C1KS53 C1KS54 C1KS55 C1KS56 C1KS57 C1KS58 C1KS59 C1KS60 C1KS61 C1KS62 C1KS63 C1KS64 C1KS65 C1KS66 C1KS67 C1KS68 C1KS69 C1KS70 C1KS71 C1KS72 C1KS73 C1KS74 C1KS75 C1KS76 C1KS77 C1KS78 C1KS79 C1KS80 C1KS81 C1KS82 C1KS83 C1KS84 C1KS85 C1KS86 C1KS87 C1KS88 C1KS89 C1KS90 C1KS91 C1KS92 C1KS93 C1KS94 C1KS95 C1KS96 . .951 . .952 . .951 . .951 . .951 . .952 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .951 . .956 . .956 . .956 . .956 . .956 . .956 . .956 . .957 . .957 . .957 . .957 . .995 . .995 . .973 . .973 . .974 . .974 . .974 . .974 . .974 . .974 . .975 . .947 . .979 . .979 . .979 . .979 . .979 . .979 . .979 . .981 . .981 . .981 . .982 . .982 . .982 . .964 . .964 . .954 . .954 . .954 . .954 . .955 . .955 . .955 . .955 . .958 Part No. Page C1KS97 C1KS98 C1KS99 C1KT11 C1KT12 C1KT13 C1KT14 C1KT15 C1KT16 C1KT17 C1KT18 C1KT19 C1KT20 C1KT21 C1KT22 C1KT23 C1KT24 C1KT25 C1KT26 C1KT27 C1KT28 C1KT29 C1KT30 C1KT31 C1KT32 C1KT33 C1KT34 C1KT35 C1KT36 C1KT37 C1KT38 C1KT39 C1KT40 C1KT41 C1KT42 C1KT43 C1KT44 C1KT45 C1KT46 C1KT47 C1KT48 C1KT49 C1KT50 C1KT51 C1KT52 C1KT53 C1KT54 C1KT55 C1KT56 C1KT57 C1KT58 C1KT59 C1KT60 C1KT61 C1KT62 C1KT63 C1KT64 C1KT65 C1KT66 C1KT67 C1KT68 C1KT69 C1KT70 . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 958 958 958 958 965 965 965 965 965 954 954 954 949 949 949 949 949 949 949 984 984 984 984 984 984 985 971 971 971 993 993 993 993 971 971 993 993 985 985 985 985 985 985 948 986 986 986 986 986 986 986 960 961 961 961 961 959 959 959 959 959 960 960 Part No. Page C1KT71 C1KT72 C1KT73 C1KT75 C1KT76 C1KT77 C1KT78 C1KT79 C1KT80 C1KT81 C1KT82 C1KT83 C1KT84 C1KT85 C1KT86 C1KT87 C1KT88 C1KT89 C1KT90 C1KT91 C1KT92 C1KT94 C1KT98 C1KU13 C1KU14 C1KU53 C1KU65 C1KU66 C1KU76 C1KU82 C1KU83 C1KU84 C1KU85 C1KU86 C1KU87 C1KU88 C1KU99 C1KV11 C1KV12 C1KV13 350 C1KV14 350 C1KV15 350 C1KV16 350 C1KV17 350 C1KV28 C1KV29 C1KV30 C1KV31 C1KV32 C1KV33 C1KV34 C1KV35 C1KV42 C1KV43 C1KV48 C1KV49 C1KV62 C1KV67 . .960 . .960 . .960 . .878 . .878 . .878 . .878 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .719 . .360 . .432 . .432 . .432 . .169 .1072 .1073 . .873 . .293 . .293 . .293 . .293 . .293 . .293 . .293 . .873 . .873 .1072 . 349, . 349, . 349, . 349, . 349, . .884 . .884 . .884 . .884 . .884 . .884 . .884 . .884 . .431 . .431 .1072 .1073 . .423 . .411
Fluid Conveying
1328

Part No. Page C1KV68 C1KV70 C1KV71 C1KV72 C1KV74 C1KV75 C1KV81 C1KV82 C1KV87 C1KV88 C1KV98 C1KV99 C1KW11 C1KW12 C1KW13 C1KW14 C1KW15 C1KW16 C1KW17 C1KW18 C1KW19 C1KW20 C1KW35 C1KW40 C1KW42 C1KW65 C1KW66 C1KW67 C1KW68 C1KW69 C1KW70 C1KW71 C1KW72 C1KW73 C1KW78 C1KW79 C1KW80 C1KW81 C1KW82 C1KW83 C1KW84 C1KW85 C1KW86 C1KW87 C1KW88 C1KW89 C1KW90 C1KW91 C1KW92 C1KW93 C1KW94 C1KW95 C1KW96 C1KW97 C1KW98 C1KW99 C1KX11 C1KX12 C1KX13 C1KX14 C1KX15 C1KX16 C1KX17 . .411 . .424 . .424 . .424 . .421 . .421 . .290 . .407 . .287 . .287 . .875 . .875 .875 .875 .875 .875 .875 .875 .875 .875 .875 .875 1075 .415 .416 .891 1007 1007 1007 1007 1007 1007 1007 1007 .890 .890 .890 .890 .887 .887 .887 .887 .887 .887 .887 .887 .887 .887 .887 .887 .888 .888 .888 .889 .889 .886 . .886 . .886 . .886 . .886 . .886 . .886 . .886 Part No. Page C1KX18 C1KX19 C1KX20 C1KX21 C1KX22 C1KX23 C1KX24 C1KX25 C1KX26 C1KX27 C1KX28 C1KX29 C1KX30 C1KX31 C1KX32 C1KX33 C1KX34 C1KX35 C1KX36 C1KX37 C1KX38 C1KX39 C1KX40 C1KX41 C1KX42 C1KX43 C1KX44 C1KX45 C1KX46 C1KX47 C1KX48 C1KX49 C1KX50 C1KX51 C1KX52 C1KX53 C1KX54 C1KX55 C1KX56 C1KX57 C1KX58 C1KX60 C1KX64 C1KX68 C1KX70 C1KX75 C1KX76 C1KX80 C1KX85 C1KX93 C1KY57 C1KY65 C1KY66 C1KY76 C1KY77 C1KY78 C1KY79 C1KY86 C1KY96 C1KY97 C1KY99 C1KZ11 C1KZ12 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 888 . . 888 . . 888 . . 888 . . 888 . . 888 . . 888 . . 888 . . 888 . . 888 . . 891 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 886 . . 888 . . 888 . . 888 . . 888 . . 891 . . 891 . . 891 . . 892 . . 892 . . 259 . 1073 . . 355 . . 355 . . 355 . . 355 . . 355 . . 355 . 1073 . . 750 . 1075 . 1075 . . 355 . . 355 . . 355 . . 355 . . 259 . . 357 . . 357 . . 357 . . 357 . . 352 Part No. Page C1KZ23 C1KZ24 C1KZ42 C1KZ44 C1KZ45 C1KZ46 C1KZ47 C1KZ56 C1KZ57 C1KZ58 352 C1KZ59 C1KZ60 352 C1KZ61 352 C1KZ62 C1KZ63 C1KZ64 C1KZ65 C1KZ66 C1KZ67 C1KZ68 C1KZ69 C1KZ70 C1KZ71 C1KZ72 C1KZ73 347 C1KZ74 347 C1KZ75 347 C1KZ76 347 C1KZ77 347 C1KZ79 347 C1KZ81 347 C1KZ82 347 C1KZ83 C1KZ84 C1KZ85 C1KZ86 C1KZ87 C1KZ88 C1KZ89 C1KZ91 C1KZ92 C1KZ93 C1KZ94 C1KZ95 353 C1KZ96 C1KZ97 C1KZ98 C1KZ99 C1LA11 C1LA12 C1LA14 1072 1073 . 351 . 358 . 358 1075 1075 . 351 . 351 . 351, . 352 . 351, . 351, . 352 . 344 . 344 . 357 . 357 . 357 . 357 . 344 . 344 . 343 . 343 . 345, . 345, . 345, . 345, . 345, . 345, . 345, . 345, . 357 . 357 . 357 . 345 . 345 . 345 . 347 . 343 . 343 . 343 . 352 . 351, . . . . . . . 345 345 343 342 342 342 342 Part No. Page C1LA15 C1LA19 C1LA20 C1LA21 C1LA22 C1LA23 C1LA24 C1LA25 C1LA26 C1LA27 C1LA28 C1LA29 C1LA30 C1LA31 C1LA32 C1LA33 C1LA38 C1LA39 C1LA40 C1LA41 C1LA42 C1LA43 C1LA44 C1LA45 C1LA47 C1LA48 C1LA49 C1LA50 C1LA51 C1LA52 C1LA53 C1LA54 C1LA55 C1LA56 C1LA57 C1LA58 C1LA59 C1LA60 C1LA61 C1LA62 C1LA63 C1LA64 C1LA65 C1LA66 C1LA67 C1LA68 C1LA69 C1LA70 C1LA71 C1LA72 C1LA73 C1LA74 C1LA75 C1LA76 C1LA77 C1LA79 C1LA80 C1LA81 C1LA83 C1LB20 647 C1LB21 647 . . 342 . . 352 . . 351 . . 351 . . 351 . . 351 . . 357 . . 357 . . 357 . . 357 . . 357 . . 357 . . 357 . . 357 . . 357 . . 357 . . 352 . . 343 . . 343 . . 343 . . 343 . . 344 . . 344 . . 345 . . 346 . . 346 . . 346 . . 358 . . 355 . . 355 . . 355 . . 358 . . 358 . . 359 . . 359 . . 359 . . 359 . . 359 . . 358 . . 359 . . 359 . . 358 . . 358 . . 358 . . 351 . . 352 . . 345 . . 355 . . 355 . . 359 . . 343 . . 343 . . 344 . . 344 . . 345 . . 346 . . 346 . . 346 . . 352 . 645, . 645, Part No. Page C1LB59 C1LB66 C1LB67 C1LB68 C1LB69 C1LB70 C1LB71 C1LB72 C1LB73 C1LB74 C1LB75 C1LB76 C1LB77 C1LB78 C1LB79 C1LB80 C1LB81 C1LB82 C1LB83 C1LB84 C1LB85 C1LB87 C1LB88 C1LB97 C1LB98 C1LB99 C1LC11 C1LC12 C1LC13 C1LC14 C1LC15 C1LC16 C1LC17 C1LC18 C1LC19 C1LC20 C1LC21 C1LC22 C1LC23 C1LC24 C1LC25 C1LC26 C1LC27 C1LC28 C1LC29 C1LC30 C1LC31 C1LC32 C1LC33 C1LC34 C1LC35 C1LC36 C1LC37 C1LC38 C1LC39 C1LC40 C1LC41 C1LC42 C1LC43 C1LC44 C1LC45 C1LC46 C1LC47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 644 662 662 662 662 662 662 662 662 662 662 662 662 662 662 662 662 662 662 662 662 665 665 921 921 921 921 921 919 919 919 919 919 919 919 919 919 919 919 919 919 919 919 919 920 920 920 920 920 920 920 920 920 920 920 920 920 920 920 920 921 921 921 Part No. Page C1LC48 C1LC49 C1LC50 C1LC51 C1LC52 C1LC53 C1LC54 C1LC55 C1LC58 C1LC59 C1LC60 C1LC61 C1LC62 C1LC63 C1LC64 C1LC65 C1LC66 C1LC67 C1LC68 C1LC72 C1LC73 C1LC74 C1LC75 C1LC76 C1LC77 C1LC78 C1LC79 C1LC80 C1LC81 C1LC82 C1LC83 C1LC84 C1LC85 C1LC86 C1LC87 C1LC94 C1LC95 C1LC96 C1LC97 C1LC98 C1ZS65 C1ZS68 C1ZS69 C1ZS73 C1ZS90 C1ZS91 C1ZS92 C1ZS93 C1ZS94 C1ZS95 C1ZS96 C1ZS98 C1ZS99 C1ZT15 C1ZT17 C1ZT21 C1ZT26 C1ZT27 C1ZT29 C1ZT30 C1ZT33 C1ZT34 C1ZT41 . .921 . .921 . .921 . .921 . .921 . .921 . .921 . .921 . .644 . .644 . .664 . .647 . .647 . .647 . .647 . .664 . .641 . .641 . .664 . .644 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 . .663 .1093 . .342 . .342 . .342 .1109 .1103 .1108 .1103 .1108 .1102 .1108 .1108 . .383 .1201 .1229 .1019 . .818 . .942 . .798 . .798 .1140 .1139 . .170 Part No. Page C1ZT53 C1ZT54 C1ZT55 C1ZT56 C1ZT57 C1ZT58 C1ZT59 C1ZT60 C1ZT61 C1ZT62 C1ZT63 C1ZT64 C1ZT65 C1ZT66 C1ZT67 C1ZT68 C1ZT69 C1ZT70 C1ZT80 C1ZT91 C1ZT92 C1ZT99 C1ZU11 C1ZU13 C1ZU15 C1ZU16 C1ZU20 C1ZU22 C1ZU23 C1ZU24 C1ZU26 C1ZU27 C1ZU28 C1ZU30 C1ZU32 C1ZU33 C1ZU35 C1ZU43 C1ZU47 C1ZU61 C1ZU69 C1ZU70 C1ZU72 C1ZU74 C1ZU75 C1ZU76 C1ZU78 C1ZU79 C1ZU80 C1ZU83 C1ZU84 C1ZU85 C1ZU86 C1ZU91 C1ZU92 C1ZU93 C1ZU94 C1ZU95 C1ZU96 C1ZU97 C1ZU98 C1ZU99 C1ZV11 . 1197 . 1003 . . 129 . 1022 . 1022 . 1022 . 1022 . 1022 . 1022 . 1022 . 1022 . 1022 . 1022 . 1021 . 1009 . 1016 . 1016 . 1011 . 1202 . . 870 . 1221 . . 118 . 971 . 829 1050 . 979 . 788 . 768 . 767 . 814 . 861 . 861 . 861 . 861 . 861 . 861 . 861 . 646 . 972 1108 . 647 . 210 . 708 . 742 . 752 . 752 . 752 . 752 . 752 1142 1142 1142 1142 1255 1252 1252 1252 1252 1251 1255 1255 1253 . 1253 Part No. Page C1ZV12 C1ZV13 C1ZV18 C1ZV21 C1ZV22 C1ZV27 C1ZV29 C1ZV31 C1ZV32 C1ZV34 C1ZV35 C1ZV38 C1ZV40 C1ZV46 C1ZV47 C1ZV51 C1ZV52 C1ZV53 C1ZV55 C1ZV59 C1ZV62 C1ZV63 C1ZV66 C1ZV68 C1ZV69 C1ZV70 C1ZV71 C1ZV72 C1ZV73 C1ZV76 C1ZV79 C1ZV88 C1ZV89 C1ZV90 C1ZV91 C1ZV92 C1ZV93 C1ZV94 C1ZV95 C1ZV96 C1ZW11 C1ZW12 C1ZW13 C1ZW14 C1ZW17 C1ZW18 C1ZW19 C1ZW20 C1ZW22 C1ZW23 C1ZW24 C1ZW25 C1ZW26 C1ZW27 C1ZW29 C1ZW30 C1ZW31 C1ZW32 C1ZW33 C1ZW34 C1ZW38 C1ZW39 C1ZW42 .1253 .1253 .1221 .1256 .1252 .1255 .1255 .1254 .1252 .1254 .1254 . .785 . .782 . .889 . .116 .1093 .1093 .1093 .1093 .1033 . .804 . .804 . .381 .1117 .1117 .1116 .1116 .1116 .1116 .1124 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1123 .1121 .1121 .1121 .1121 .1120 .1120 .1120 .1122 .1122 .1140 .1140 .1140 .1140 .1140 .1138
1329

Part No. Page C1ZW44 C1ZW46 C1ZW50 C1ZW54 C1ZW56 C1ZW57 C1ZW58 C1ZW59 C1ZW64 C1ZW67 C1ZW71 C1ZW72 C1ZW73 C1ZW74 C1ZW75 C1ZW76 C1ZW77 C1ZW78 C1ZW79 C1ZW80 C1ZW81 C1ZW82 C1ZW83 C1ZW84 C1ZW86 C1ZW87 C1ZW89 C1ZW93 C1ZW94 C1ZW95 C1ZW97 C1ZW98 C1ZW99 C1ZX17 C1ZX22 C1ZX34 C1ZX37 C1ZX39 C1ZX58 C1ZX60 C1ZX71 C1ZX81 C1ZX84 C1ZX85 C1ZX87 C1ZX88 C1ZX89 C1ZX90 C1ZX91 C1ZX92 C1ZX93 C1ZX97 C1ZX98 C1ZY17 C1ZY19 C1ZY20 C1ZY21 C1ZY22 C1ZY24 C1ZY25 C1ZY26 C1ZY27 1128 .1137 .1137 .1120 .1121 .1121 .1121 .1121 .1121 .1138 .1138 .1137 .1137 .1137 .1137 .1137 .1125 .1125 .1125 .1125 .1125 .1125 .1124 .1124 .1124 .1120 .1120 .1023 .1021 .1015 .1015 . .981 . .981 . .981 . .158 . .265 .1090 .1177 .1226 . .631 . .384 .1004 . .753 . .949 . .949 . .998 . .998 . .998 . .943 . .825 . .806 . .979 . .705 . .705 . .703 .1139 .1139 .1139 .1136 .1136 .1133 .1138 . 830, Part No. Page C1ZY43 . 1020 C1ZY50 . 1097 C1ZY53 . . 152 C1ZY63 . . 934 C1ZY79 . 1050 C1ZY80 . 1054 C1ZY86 . 1056 C1ZY88 . 1091 C1ZY89 . 1059 C1ZY90 . 1059 C1ZY92 . 1062 C1ZY94 . 1059 C1ZY96 . . 969 C1ZZ13 . . 788 C1ZZ14 . . 782 C1ZZ15 . . 782 C1ZZ16 . . 782 C1ZZ17 . . 765 C1ZZ18 . . 770 C1ZZ21 . . 857 C1ZZ22 . . 858 C1ZZ23 . 1091 C1ZZ26 . 1003 C1ZZ27 . . 858 C1ZZ28 . . 858 C1ZZ36 . . 369 C1ZZ38 . . 369 C1ZZ47 . . 630 C1ZZ49 . . 136 C1ZZ51 . . 856 C1ZZ52 . . 856 C1ZZ53 . . 856 C1ZZ54 . . 856 C1ZZ55 . . 856 C1ZZ56 . . 856 C1ZZ57 . . 856 C1ZZ58 . . 856 C1ZZ59 . . 856 C1ZZ63 . . 934 C1ZZ64 . . 931 C1ZZ65 . . 931 C1ZZ66 . . 933 C1ZZ74 . . 348 C1ZZ80 . . 301 C1ZZ82 . . 239 C1ZZ83 . . 329 C1ZZ86 . . . 92 C1ZZ93 . . 143 C1ZZ94 . . 143 N/A . . . . 374, 1209, . . 1210, 1211, . . 1212, 1213, . . 1214, 1215, . . 1216, 1217, . . 1218, 1220 Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page
Fluid Conveying
1330
Technical Information
Fluid Power Formulas
FORMULA FOR
FLUID PRESSURE In Pounds per Square Inch CYLINDER AREA In Square Inches CYLINDER FORCE In Pounds, Push or Pull CYLINDER VELOCITY or SPEED In Feet per Second CYLINDER VOLUME CAPACITY In Gallons of Fluid CYLINDER FLOW RATE In Gallons per Minute
WORD FORMULA
FORCE (pounds) PRESSURE = --------------------------------------------------UNIT AREA (Sq.In.) AREA = RADIUS
2
LETTER FORMULA
P = F -- or psi = F -A A A = r 2 D or A = .785D 2 ----------A = 4 F = psi A or F = PA Q V = 231 ------------ or V = .3208Q ----------------720 A A r t V = --------231 AtV = -------231
2 2
(Inches)
2
DIAMETER - (Inches) AREA = ------------------------------------------4 FORCE = PRESSURE (psi) x NET AREA (Sq. In.) 231 x FLOW RATE (gpm) VELOCITY = -------------------------------------------------------------------------12 x 60 x NET AREA (Sq. In.) x RADIUS x STROKE (Inches) VOLUME = ----------------------------------------------------------------------------------231 AREA (Sq. In.) x STROKE (Inches) VOLUME = NET ---------------------------------------------------------------------------------------------------231 (Ft/Sec) x NET AREA (Sq.In) FLOWRATE = 12x60xVELOCITY ------------------------------------------------------------------------------------------------------------------------231 PRESSURE(psi)xF.M.DISPLACEMENT (Cu.In./Rev.) TORQUE = ------------------------------------------------------------------------------------------------------------------------------------2
2
t = stroke t = stroke
720 vA Q = --------------- or Q = 3.117vA 231 T = psid ---------- or T = Pd -----2 2 HP T = 63025 ---------------------n QP T = 36.77 --------------------- n
or T = -------------------------
Fluid Conveying
FLUID MOTOR TORQUE In Inch Pounds
x 63025 TORQUE = HORSEPOWER -----------------------------------------------------------RPM RATE (GPM) x PRESSURE (psi) x 36.77 TORQUE = FLOW ----------------------------------------------------------------------------------------------------------------------RPM
36.77 Qpsi n
FLUID MOTOR TORQUE Per 100 PSI In Inch Pounds FLUID MOTOR SPEED In Revolutions per Minute FLUID MOTOR POWER In Horsepower Output PUMP OUTLET FLOW In Gallons per Minute PUMP INPUT POWER In Horsepower Required FLOW RATE THROUGH PIPING In Feet per Second
(Cu.In./Rev.) TORQUE per 100 psi = F.M.DISPLACEMENT ----------------------------------------------------------------------------------------.0628 231 x FLOW RATE (GPM) SPEED = ------------------------------------------------------------------------------------------F.M. DISPLACEMENT (Cu.In./Rev.) OUTPUT (inch Pounds) x RPM HP OUTPUT = TORQUE -----------------------------------------------------------------------------------------------------63025 x PUMP DISPLACEMENT (Cu.In./Rev.) FLOW = RPM -----------------------------------------------------------------------------------------------------------------231 RATE OUTPUT (GPM) x PRESSURE (psi) HP INPUT = FLOW ----------------------------------------------------------------------------------------------------------------------------1714 x EFFICIENCY (Overall)
d T 100 psi = -----------.0628 231 Q n = -----------d Tn HP = -------------63025 ndQ = -------231 QP - HP = ------------------------1714 Eff GPM psi or -------------------------1714 Eff v = .3208Q ----------------A PV - V = -------------------250 000
(Approx. 1/2% per 1000 psi)
.3208 x FLOW RATE THROUGH I.D. (GPM) VELOCITY = ----------------------------------------------------------------------------------------------------------------INTERNAL AREA (Square Inches)
COMPRESSIBILITY OF OIL Pressure (psi) x Volume of Oil Under Pressure In Additional Required Oil to Additional Oil Volume = --------------------------------------------------------------------------------------------------------------250,000 Reach Pressure
1331
Hydraulic Fluids Viscosity - Temperature Charts for ISO VG 32-46-68 Fluids
1332
Temperature, Degrees Fahrenheit Viscosity, Saybolt Universal Seconds (SSU)
Fluid Conveying
Hydraulic Fluids Viscosity - Temperature Charts for Specific Fluids
Temperature, Degrees Fahrenheit
Viscosity, Saybolt Universal Seconds (SSU)
1333
Hydraulic System Design Calculations Accumulator Sizing

A. System Pressure In order to achieve maximum accumulator life, the maximum operating system pressure should not be more than three times the minimum operating system pressure. Pressures above this 3:1 ratio can cause an excessive rise in gas chamber temperatures and excessive bladder and diaphragm deformation. Hence, the lower the maximum to minimum pressure ratio, the longer the operating life of the accumulator. B. Storage Capacity 1. If the 3:1 system pressure is adhered to, the rule of thumb is that the maximum storage capacity that is available in the accumulator is approximately 60% of its rated size. Example:1 gallon = 231 cubic inches.Available volume (apprx) = 139 cubic inches. 2. It is very important to always select the accumulator size whose storage capacity is equal to or greater than that which is required. Utilizing accumulators with smaller capacities will result in the complete evacuation of the oil in the accumulator, causing the eventual failure of either the bladder or the diaphragm. There should always be at least 10% of the hydraulic fluid left in the accumulator during normal operations so that the bladder does not come in contact with the oil valve poppet nor the diaphragm comein contact with the oil port. C. Pre-Charge Pressure 1. Shock and Pulsation Dampener. When an accumulator is used as a shock and/or pulsation dampener, the pre-charge pressure should be 80% of the minimum system pressure. 2. Energy Storage. When an accumulator is used for energy storage, the pre-charge pressure should be 90% of the minimum system pressure. D. Available Fluid Volume The amount of hydraulic fluid available from the accumulator is based on either the isothermal or adiabatic charge state of the nitrogen gas. 1. Isothermal Isothermal curves are used when the movement of the fluid into and out of the accumulator occurs so slowly (3 minutes or more) that there is enough time for the complete exchange of heat between the gas and its surroundings. The result is little or no change in gas temperature. 2. Adiabatic Adiabatic curves are used when the movement of the fluid into and out of the accumulator occurs so rapidly that the temperature of the gas is rapidly changing because of the rapid compression and expansion of the gas.
Fluid Conveying
1334
Sample Sizing Problem System Requirements:Minimum Operating Pressure (P2)650 PSI Maximum Operating Pressure (P3)1600 PSI Liquid Volume Required1 Gallon Time required for discharge2 seconds PRESSURE-VOLUME CURVE, ADIABATIC RELATIONSHIP, Bladder Type Accumulator Pneumatic Power & Control Hydraulic Power & Control
Available Volume (Cubic Inches)
Nominal Size in Gallons
Operating Pressures P2 and P3 (PSI)
Solution: 1. Pre-charge Pressure (P1) = 90% of minimum operating pressure (P2) = .90 x 650 = 585 PSI. 2. Accumulator size (using the adiabatic curve due to the rapid discharge time): Follow a line vertically upwards from the P2 pressure line (650 PSI) and P3 pressure line (1600 PSI) until they intersect the P1 pre-charge pressure line (585 PSI). Then moving horizontally to the left handscale, read the available fluid volume figures. The difference between the two figures is the volume which can be stored in the specific size accumulator. 3. For the above example, the 2-1/2 gallon accumulator most closely fits the requirements. (320 cu.in. minus 50 cu.in. = 270 cu.in.)
1335

PRESSURE-VOLUME CURVE, ADIABATIC RELATIONSHIP, Bladder Type Accumulator
Fluid Conveying
Available Volume (Cubic Inches) Nominal Size in Gallons
PRESSURE-VOLUME CURVE, ISOTHERMAL RELATIONSHIP, Bladder Type Accumulator
Available Volume (Cubic Inches) Nominal Size in Gallons
1336
How to Identify Fluid Connectors American Connections Inverted Flare (SAE J512 Inverted)
Inch Size 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 Dash Size 02 03 04 05 06 07 08 10 12 Nominal Thread Size 5/16-18 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16 Male Thread O.D. (inch) Fraction 5/16 3/8 7/16 1/2 5/8 11/16 3/4 7/8 1-1/16 Dec. .32 .38 .44 .50 .63 .69 .75 .88 1.06 Female Thread I.D. (inch) Fraction 9/32 11/32 13/32 15/32 9/16 5/8 23/32 13/16 1 Dec. .28 .34 .40 .45 .57 .63 .70 .82 1.00
Male Half
Female Half
This connection is frequently used in automotive systems. The male connector can either be a 45 flare in the tube fitting form or a 42 seat in the machined adaptor form. The female has a straight thread with a 42 inverted flare. The seal takes place on the flared surfaces. The threads hold the connection mechanically.
JIC Flared (SAE J514 37 Flare)
Inch Size 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2
Dash Size 02 03 04 05 06 08 10 12 16 20 24
Nominal Thread Size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12
Male Thread O.D. (inch) Fraction 5/16 3/8 7/16 1/2 9/16 3/4 7/8 1-1/16 1-5/16 1-5/8 1-7/8 Dec. .31 .38 .44 .50 .56 .75 .88 1.06 1.31 1.63 1.88
Female Thread I.D. (inch) Fraction 9/32 11/32 13/32 15/32 17/32 11/16 13/16 1 1-1/4 1-9/16 1-13/16 Dec. .27 .34 .39 .45 .51 .69 .81 .98 1.23 1.54 1.79
Fluid Conveying
Male Half
Female Half
This connection is very common in fluid power systems. Both the male and female halves of the connections have 37 seats. The seal takes place by establishing a line contact between the male flare and the female cone seat. The threads hold the connection mechanically. Caution: In the -02, -03, -04, -05, -08 and -10 sizes, the threads of the SAE 45 flare and the SAE 37 flare are the same. However, the sealing surface angles are not the same.
NPTF (National Pipe Tapered Fuel)
Inch Size 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Dash Nominal Size Thread Size 02 04 06 08 12 16 20 24 32 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2
Male Thread O.D. (inch) Fraction 13/32 17/32 11/16 27/32 1-1/16 1-5/16 1-21/32 1-29/32 2-3/8 Dec. .41 .54 .68 .84 1.05 1.32 1.66 1.90 2.38
Female Thread I.D. (inch) Fraction 3/8 1/2 5/8 25/32 1 1-1/4 1-19/32 1-13/16 2-5/16 Dec. .38 .49 .63 .77 .98 1.24 1.58 1.82 2.30
Male Half
Female Half
This connection is still widely used in fluid power systems, even though it is not recommended ny the National Fluid Power Association (NFPA) for use in hydraulic systems. The thread is tapered and the seal takes place by deformation of the threads. Note: Measure the thread diameter and subtract 1/4 inch to find the nominal pipe size.
1337
How to Identify Fluid Connectors American Connections NPSM (National Pipe Straight Mechanical)
Inch Size 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Dash Nominal Size Thread Size 02 04 06 08 12 16 20 24 32 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2 Male Thread O.D. (inch) Fraction 13/32 17/32 11/16 27/32 1-1/16 1-5/16 1-21/32 1-29/32 2-3/8 Dec. .41 .54 .68 .84 1.05 1.32 1.66 1.90 2.38 Female Thread I.D. (inch) Fraction 3/8 1/2 5/8 25/32 1 1-1/4 1-19/32 1-13/16 2-5/16 Dec. .38 .49 .63 .77 .98 1.24 1.58 1.82 2.30
Male Half
Female Half
This connection is sometimes used in fluid power systems. The female half has a straight thread and an inverted 30 seat. The male half of the connection has a straight thread and a 30 internal chamfer. The seal takes place by compression of the 30 seat on the chamfer. The threads hold the connection mechanically. Note: A properly chamfered NPTF male will also seal with the NPSM female.
Fluid Conveying
ORB (SAE J514 Straight Thread O-Ring Boss)
Inch Size 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2
Dash Nominal Size Thread Size 02 03 04 05 06 08 10 12 16 20 24 32 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12
Male Thread O.D. (inch) Fraction 5/16 3/8 7/16 1/2 9/16 3/4 7/8 1-1/16 1-5/16 1-5/8 1-7/8 2-1/2 Dec. .31 .38 .44 .50 .56 .75 .88 1.06 1.31 1.63 1.88 2.50
Female Thread I.D. (inch) Fraction 9/32 11/32 13/32 15/32 17/32 11/16 13/16 1 1-1/4 1-9/16 1-13/16 2-7/16 Dec. .27 .34 .39 .45 .51 .69 .81 .98 1.23 1.54 1.79 2.42
Male Half
Female Half
This port connection is recommended by the NFPA for optimum leakage control in medium and high pressure hydraulic systems. The male connector has a straight thread and an O-Ring. The female port has a straight thread, a machined surface (minimum spotface) and a chamfer to accept the O-Ring. The seal takes place by compressing the O-Ring into the chamfer. The threads hold the connection mechanically.
ORS (SAE J1453 O-Ring Face Seal)
Inch Size 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2
Dash Nominal Size Thread Size 04 06 08 10 12 16 20 24 9/16-18 11/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12 1-11/16-12 2-12
Male Thread O.D. (inch) Fraction 9/16-18 11/16 .13/16 1 1-3/16 1-7/16 1-11/16 2 Dec. .56 .69 .82 1.00 1.19 1.44 1.69 2.00
Female Thread I.D. (inch) Fraction 17/32 5/8 3/4 15/16 1-1/8 1-3/8 1-5/8 1-15/16 Dec. .51 .63 .75 .93 1.11 1.36 1.61 1.92
Male Half
Female Half
This connection offers the very best leakage control available today. The male connector has a straight thread and an O-Ring in the face. The female has a straight thread and a machined flat face. The seal takes place by compressing the O-Ring onto the flat face of the female, similar to the split flange type fitting. The threads hold the connection mechanically.
1338
How to Identify Fluid Connectors American Connections SAE Flared (SAE J1512 45 Flare)
Male Thread O.D. (inch) Fraction 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1-1/16 1-1/4 1-3/8 Dec. .31 .38 .44 .50 .63 .75 .88 1.06 1.25 1.38 Female Thread I.D. (inch) Fraction 9/32 11/32 13/32 15/32 9/16 11/16 13/16 1 1-5/32 1-9/32 Dec. .27 .34 .39 .45 .57 .69 .81 .99 1.16 1.29
Inch Size 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1
Dash Nominal Size Thread Size 02 03 04 05 06 08 10 12 14 16 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 3/4-16 7/8-14 1-1/16-14 1-1/4-12 1-3/8-12
Male Half
Female Half
This connection is commonly used in refrigeration, automotive and truck piping systems. The connector is frequently made of brass. Both the male and female connectors have 45 seats. The seal takes place between the male flare and the female cone seat. The threads hold the connection mechanically. Caution: In the -02, -03, -04, -05, -08 and -10 sizes, the threads of the SAE 45 flare and the SAE 37 flare are the same. However, the sealing surface angles are not the same.
SAE J518 4-Bolt Flange
Inch Size Port (Dash Hole Size) I.D.
Bolt Dimensions Size (Length)
Bolt Hole Spacing A Inch (Dec.)
Flanged Head Dia. K Inch (Dec.) Code 62 1-1/4 (1.25) 1-5/8 (1.63) 1-7/8 (1.88) 2-1/8 (2.13) 2-1/2 (2.50) 3-1/8 (3.12)
Fluid Conveying
This connection is commonly used in fluid power systems. There are two pressure ratings. Code 61 is referred to as the standard series and Code 62 is the 6000 psi series. The design concept is the same, but the bolt hole spacing and the flanged head diameters are larger for the higher pressure, Code 62 connection. The female (port) is an unthreaded hole with four threaded bolt holes in a rectangular pattern around the port. The male consists of a flanged head, grooved for an O-Ring, and either a captive flange or split flange halves with bolt holes to match the port. The seal takes place on the O-Ring, which is compressed between the flanged head and the flat surface surrounding the port. The threaded bolts hold the connection together. Note: SAE J518, JIS B 8363, ISO/DIS 6162 and DIN 20066 are interchangeable, except for bolt sizes.
1/2 (08) 3/4 (12) 1 (16) 1-1/4 (20) 1-1/2 (24) 2 (32)
.50 .75 1.00 1.25 1.50 2.00
Code Code Code Code Code 61 62 61 62 61 5/16-18 5/16-18 1-1/2 1-19/32 1-3/16 (1-1/4) (1-1/4) (1.50) (1.59) (1.19) 3/8-16 3/8-16 1-7/8 2 1-1/2 (1-1/4) (1-1/2) (1.88) (2.00) (1.50) 3/8-16 7/16-14 2-1/16 2-1/4 1-3/4 (1-1/4) (1-3/4) (2.06) (2.25) (1.75) 7/16-14 1/2-13 2-5/16 2-5/8 2 (1-1/2) (1-3/4) (2.31) (2.63) (2.00) 1/2-13 5/8-11 2-3/4 3-1/8 2-3/8 (1-1/2) (2-1/4) (2.75) (3.12) (2.38) 1/2-13 3/4-10 3-1/16 3-13/16 2-13/16 (1-1/2) (2-3/4) (3.06) (3.81) (2.81)
1339
How to Identify Fluid Connectors American Connections Staplok (SAE J1467)
Inch Size 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Dash Size 04 06 08 12 16 20 24 32
Male Thread O.D. (inch) Fraction 19/32 25/32 15/16 1-9/64 1-17/32 1-13/16 2-5/32 2-33/64 Dec. .586 .783 .940 1.137 1.529 1.806 2.163 2.517
Female Thread I.D. (inch) Fraction 19/32 51/64 61/64 1-9/64 1-35/64 1-13/16 2-11/64 2-17/32 Dec. .597 .794 .951 1.148 1.540 1.817 2.174 2.528
Male Half
Female Half
Connected
This is a radial O-Ring seal connection developed in Germany and commonly used for hydraulic applications in underground mines. The male contains an exterior O-Ring and backup ring, plus a groove to accept the staple. The female has a smooth bore with two holes for the staple. A U shaped retaining clip or staple is inserted through the two holes, passing through the groove in the male to lock the connection together. The seal takes place by contact between the O-Ring in the male and the smooth bore of the female.
Fluid Conveying
Bump Tube O-Ring Seal and O-Ring Pilot Fittings

Male Thread O.D. (inch) Inch Dash Nominal Fractio Dec. Size Size Thread n 3/8 06 5/8-18 5/8 0.62 1/2 08 3/4-18 3/4 0.75 5/8 10 7/8-18 7/8 0.87 3/4 12 1-1/16-16 1-1/16 1.06 Long Pilot Inch Size This connection is common to air conditioning systems, both in vehicle and commercial applications. Both the male and female halves of the connections have a pilot, either long or short. The seal takes place by compressing an O-ring adjacent to the bead of the tube. The threads hold the connection together mechanically. 3/8 1/2 5/8 3/4 Nominal Tube Size 06 08 10 12 Female Thread I.D. (inch) Nominal Thread Fraction Dec. 5/8-18 9/16 0.57 3/4-16 11/16 0.69 7/8-14 13/16 0.81 1-1/16-14 1 0.99
Short Pilot
Bead Pilot Bead Pilot O.D. O.D. (in) Length (in) Length 0.52 0.28 0.52 0.19 0.64 0.39 0.64 0.19 0.77 0.39 0.77 0.19 0.91 0.39 0.91 0.19
1340
How to Identify Fluid Connectors British Connections BSP Parallel (British Standard Pipe Parallel)
Nominal Thread Size 1/8-28 1/4-19 3/8-19 1/2-14 5/8-14 3/4-14 1-11 1-1/4-11 1-1/2-11 2-11 Male Thread O.D. (inch) Fraction 3/8 33/64 21/32 13/16 7/8 1-1/32 1-5/16 1-21/32 1-7/8 2-11/32 Dec. .38 .52 .65 .82 .88 1.04 1.30 1.65 1.88 2.35 Female Thread I.D. (inch) Fraction 11/32 15/32 19/32 3/4 13/16 31/32 1-7/32 1-9/16 1-25/32 2-1/4 Dec. .35 .47 .60 .75 .80 .97 1.22 1.56 1.79 2.26
Inch Size 1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2
Dash Size 02 04 06 08 10 12 16 20 24 32
Male Half
Female Half
The BSP Parallel male is similar to the NPSM male except the thread pitches are different in most sizes. The female swivel BSPP has a tapered nose/Globeseal flareless swivel which seals on the cone seat of the male.
BSP Tapered (British Standard Pipe Tapered)
Frequently, the thread size is expressed as a fractional dimension preceded by the letter G or the letter R. The G represents a parallel thread and the R indicates a tapered thread. For example, BSPP 3/8-19 may be expressed as G 3/8, and BSPT 3/ 8-19 may be expressed as R 3/8.
Fluid Conveying
Male Half
Female Half
The BSP Tapered connection is similar to the American NPT except that the thread pitches are different in most sizes, and the thread form and O.D.s are close but not the same. Sealing is accomplished by thread distortion. A thread sealant is recommended.
1341
How to Identify Fluid Connectors German Connections DIN 3852 Male Connectors and Female Ports
The DIN is controlled by Germany, but other countries may use it as a reference for their connector and port designs. The chart below illustrates the various forms and how they seal. Male Thread O.D. A mm 12 14 16 18 20 22 24 26 27 30 30 33 36 36 38 38 42 42 45 45 48 48 52 Inch .47 .55 .63 .71 .78 .87 .94 1.02 1.06 1.18 1.18 1.30 1.41 1.41 1.49 1.49 1.65 1.65 1.77 1.77 1.89 1.89 2.04 Female Thread I.D. B mm 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 25 28.5 28 31 34.5 34 36.5 36 40.5 40 43.5 43 46.5 46 50.5 Inch .41 .49 .57 .65 .73 .81 .89 .96 .98 1.12 1.10 1.22 1.36 1.33 1.43 1.41 1.60 1.57 1.71 1.69 1.83 1.81 1.89
Metric Threads M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M24 x 1.5 M26 x 1.5 M27 x 2 M30 x 1.5 M30 x 2 M33 x 2 M36 x 1.5 M36 x 2 M38 x 1.5 M38 x 2 M42 x 1.5 M42 x 2 M45 x 1.5 M45 x 2 M48 x 1.5 M48 x 2 M52 x 1.5
Fluid Conveying
For DIN 3852 Whitworth pipe thread dimensions, see BSPT/BSPP dimensions. They are the same.
1342
How to Identify Fluid Connectors German Connections DIN 3902
Tube O.D. R Dim. l.Rh. mm(inch) 6 (.24) 8 (.32) 10 (.39) 12 (.47) 15 (.59) 18 (.71) 22 (.87) 28 (1.10) 35 (1.38) 42 (1.65)
Tube O.D. R Dim. s.Rh. mm(inch
Metric Thread Size M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M24 x 1.5 M26 x 1.5 M30 x 2.0 M36 x 2.0 M42 x 2.0 M45 x 2.0 M52 x 2.0
Male Thread O.D. mm 12 14 16 18 20 22 24 26 30 36 42 45 52 Inch .47 .55 .63 .71 .78 .87 .94 1.02 1.18 1.41 1.65 1.77 2.04
Female Thread I.D. mm 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 28 34 40 43 50 Inch .41 .49 .57 .65 .73 .81 .89 .96 1.11 1.34 1.57 1.70 1.97
6 (.24) 8 (.32) 10 (.39) 12 (.47) 14 (.55) 16 (.63) 20 (.78) 25 (.98) 30 (1.18) 38 (1.50)
This connection style consists of a common male and three different female halves. The male has a straight metric thread, a 24 included angle and a recessed counterbore that matches the tube O.D. used with it. The female may be a tube, nut and ferrule, a tapered nose/Globeseal flareless swivel or a tapered nose/Globeseal flareless swivel with an O-Ring in the nose (DKO type).
l.Rh. is a light duty system s.Rh. is a heavy duty system.
Fluid Conveying
DIN 7631
Use with Pipe/Tube O.D. mm 6 8 10 12 15 18 22 28 35 42 Inch .24 .32 .39 .47 .59 .71 .87 1.10 1.38 1.65
Metric Thread Size M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5 M26 x 1.5 M30 x 1.5 M38 x 1.5 M45 x 1.5 M52 x 1.5
Male Thread O.D. mm 12 14 16 18 22 26 30 38 45 52 Inch .47 .55 .63 .71 .87 1.02 1.18 1.50 1.77 2.04
Female Thread I.D. mm 10.5 12.5 14.5 16.5 20.5 24.5 28.5 36.5 43.5 50.5 Inch .41 .49 .57 .65 .81 .96 1.12 1.44 1.71 1.99
Male Half
Female Half
This connection is frequently used in hydraulic systems. The male has a straight metric thread and a 60 (included angle) recessed cone. The female has a straight thread and a tapered nose/Globeseal seat. The seal takes place by contact between the cone of the male and the nose of the tapered nose/Globeseal flareless swivel. The threads hold the connection mechanically.
1343
How to Identify Fluid Connectors German Connections DIN 20066 4-Bolt Flange
Size Port mm Hole (inch) mm Dash (inch)
Bolt Dimensions mm and Inch Form R (Cd.61) Form S (Cd.62) M8 x 1.25 x 30 5/16-18 x 1-1/4 M10 x 1.5 x 40 3/8-16 x 1-1/2 M12 x 1.75 x 45 7/16-14 x 1-3/4 M14 x 2 x 45 1/2-13 x 1-3/4 M16 x 2 x 55 5/8-11 x 2-1/4 M20 x 2.5 x 70 3/4-10 x 2-3/4
Bolt Hole Spacing A mm (inch) Form R Form S (Cd.61) (Cd.62) 38.10 (1.50) 47.63 (1.88) 52.37 (2.06) 58.72 (2.31) 69.85 (2.75) 77.77 (3.06) 40.49 (1.57) 50.80 (2.00) 57.15 (2.25) 66.68 (2.63) 79.38 (3.13) 96.82 (3.81)
Male Half
Female Half
12 (1/2) -08 20 (3/4) -12 25 (1) -16 32 (1-1/4) -20 40 (1-1/2) -24 50 (2) -32
12.7 (.50) 19.1 (.75) 25.4 (1.00)
M8 x 1.25 x 30 5/16-18 x 1-1/4 M10 x 1.5 x 30 3/8-16 x 1-1/4 M10 x 1.5 x 35 3/8-16 x 1-1/4
31.7 M10 x 1.75 x 40 (1.25) 7/16-14 x 1-1/2 38.0 M12 x 1.75 x 40 (1.50) 1/2-13 x 1-1/2 50.8 M12 x 1.75 x 40 (2.00) 1/2-13 x 1-1/2
This connection is commonly used in fluid power systems. There are two pressure ratings. Form R (Code 61) is the standard series and Form S (Code 62) is the heavy duty series. The design concept for both series is the same, but the bolt hole spacing and flanged head diameters are larger for the higher pressure, Form S connection. Both metric and inch bolts are used. The female (port) is an unthreaded hole with four threaded bolt holes in a rectangular pattern around the port. The male consists of a flanged head, grooved for an O-Ring, and either a captive flange or split flange halves with bolt holes to match the port. The seal takes place on the O-Ring, which is compressed between the flanged head and the flat surface surrounding the port. The threaded bolts hold the connection together. Note: DIN 20066, ISO/DIS 6166, JIS B 8363 and SAE J518 are interchangeable, except for the bolt sizes.
Fluid Conveying
Size mm (inch) Dash
Flanged Head Diameter K mm (inch) Form R (Code 61) 30.18 (1.19) 38.10 (1.50) 44.45 (1.75) 50.80 (2.00) 60.33 (2.38) 71.42 (2.81) Form S (Code 62) 31.75 (1.25) 41.28 (1.63) 47.63 (1.88) 53.98 (2.13) 63.50 (2.50) 79.38 (3.13)
12 (1/2) -08 20 (3/4) -12 25 (1) -16 32 (1-1/4) -20 40 (1-1/2) -24 50 (2) -32
1344
How to Identify Fluid Connectors ISO Connections ISO / DIS 6162 4-Bolt Flange
Bolt Dimensions mm and Inch PN 35/350 Bar (Cd.61) PN 415 Bar (Cd.62) M8 x 1.25 x 30 5/16-18 x 1-1/4 M10 x 1.5 x 40 3/8-16 x 1-1/2 M12 x 1.75 x 45 7/16-14 x 1-3/4 M14 x 2 x 50 1/2-13 x 1-3/4 M16 x 2 x 55 5/8-11 x 2-1/4 M20 x 2.5 x 70 3/4-10 x 2-3/4
Bolt Hole Spacing A mm (inch) PN PN 35/350 415 Bar Bar (Cd.61) (Cd.62) 38.10 (1.50) 47.63 (1.88) 52.37 (2.06) 58.72 (2.31) 69.85 (2.75) 77.77 (3.06) 40.49 (1.57) 50.80 (2.00) 57.15 (2.25) 66.68 (2.63) 79.38 (3.13) 96.82 (3.81)
Male Half
Female Half
This connection is commonly used in fluid power systems. There are two pressure ratings. PN 35/350 bar (Code 61) is the standard series and PN 415 bar (Code 62) is the high pressure series. The design concept for both series is the same, but the bolt hole spacing and flanged head diameters are larger for the higher pressure, PN 415 bar connection. Both metric and inch bolts are used. The port will have an M stamped on it if metric bolts are required. The female (port) is an unthreaded hole with four threaded bolt holes in a rectangular pattern around the port. The male consists of a flanged head, grooved for an O-Ring, and either a captive flange or split flange halves with bolt holes to match the port. The seal takes place on the O-Ring, which is compressed between the flanged head and the flat surface surrounding the port. The threaded bolts hold the connection together. Note: SAE J518, JIS B 8363, ISO/DIS 6162 and DIN 20066 are interchangeable, except for bolt sizes.
13 (1/2) -08 19 (3/4) -12 25 (1) -16 32 (1-1/4) -20 38 (1-1/2) -24 51 (2) -32
12.7 (.50) 19.1 (.75) 25.4 (1.00)
M8 x 1.25 x 30 5/16-18 x 1-1/4 M10 x 1.5 x 35 3/8-16 x 1-1/4 M10 x 1.5 x 35 3/8-16 x 1-1/4
31.8 M10 x 1.75 x 40 (1.25) 7/16-14 x 1-1/2 38.1 (1.50) 50.8 (2.00) M14 x 2 x 40 1/2-13 x 1-1/2 M14 x 2 x 40 1/2-13 x 1-1/2
Fluid Conveying
Flanged Head Diameter K mm (inch) Inch Size 1/2 3/4 1 1-1/4 1-1/2 2 PN 35/350 (Code 61) 30.18 (1.19) 38.10 (1.50) 44.45 (1.75) 50.80 (2.00) 60.33 (2.38) 71.42 (2.81) PN 415 (Code 62) 31.75 (1.25) 41.28 (1.63) 47.63 (1.88) 53.98 (2.13) 63.50 (2.50) 79.38 (3.13)
1345
How to Identify Fluid Connectors Japanese Connections JIS 30 Female (Cone) Seat, Parallel Pipe Threads (Threads per JIS B 0202)
Nominal Thread Size Size (Similar mm (Dash) to BSPP) 6 (-04) 1/4-19 9 (-06) 3/8-19 12 (-08) 1/2-14 19 (-12) 3/4-14 24 (-16) 1-11 32 (-20) 1-1/4-11 38 (-24) 1-1/2-11 50 (-32) 2-11
Inch Size 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Male Thread O.D. Fraction 33/64 21/32 13/16 1-1/32 1-5/16 1-21/32 1-7/8 2-11/32 mm 13.2 16.7 21.0 26.4 33.3 41.9 47.8 59.7
Female Thread I.D. Fraction 15/32 19/32 3/4 31/32 1-7/32 1-9/16 1-25/32 2-1/4 mm 11.9 15.3 19.2 24.6 30.9 39.6 45.5 57.4
Male Half
Female Half
The Japanese JIS 30 flare is similar to the American SAE 37 flare connection in application as well as sealing principles. However, the flare angle and dimensions are different. The threads are similar to BSPP.
JIS 30 Male Inverted Seat, Metric Threads (Threads per JIS B 0207)
Size mm 6 9 12 19 25
Dash Size -04 -06 -08 -12 -16
Thread Size M14 x 1.5 M18 x 1.5 M22 x 1.5 M30 x 1.5 M33 x 1.5
Male Thread O.D. mm 14 18 22 30 33 Inch .55 .71 .87 1.18 1.30
Female Thread I.D. mm 12.5 16.5 20.5 28.5 31.5 Inch .49 .65 .81 1.12 1.24
Fluid Conveying
Male Half
Female Half
The JIS parallel (metric) is the same as the JIS parallel B 0202 except for the thread difference.
JIS 30 Male Inverted Seat, Parallel Pipe Threads (Thread per JIS B 0202)
Inch Size 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Size mm (Dash) 6 (-04) 9 (-06) 12 (-08) 19 (-12) 25 (-16) 32 (-20) 38 (-24) 50 (-32)
Nominal Thread Size (Similar to BSPP) 1/4-19 3/8-19 1/2-14 3/4-14 1-11 1-1/4-11 1-1/2-11 2-11
Male Half
Female Half
The JIS parallel is similar to the BSPP connection. The JIS parallel thread and the BSPP connection are interchangeable.
1346
How to Identify Fluid Connectors Japanese Connections JIS Tapered Pipe (PT) (Threads per JIS B 0203)
Nominal Thread Size (Similar to BSPT) 1/4-19 3/8-19 1/2-14 3/4-14 1-11 1-1/4-11 1-1/2-11 2-11
Inch Size 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Size mm (Dash) 6 (-04) 9 (-06) 12 (-08) 19 (-12) 25 (-16) 32 (-20) 38 (-24) 50 (-32)
Male Half
Female Half
The JIS tapered thread is similar to the BSPT connection in design, appearance and dimensions. The JIS tapered thread and the BSPT connection are interchangeable.
JIS B 8363 4-Bolt Flange
Bolt Dimensions mm and Inch Type I (Code 61) Type II (Code 62) M8 x 1.25 x 30 5/16-18 x 1-1/4 M10 x 1.5 x 40 3/8-16 x 1-1/2 M12 x 1.75 x 45 7/16-14 x 1-3/4 M14 x 2 x 45 1/2-13 x 1-3/4 M16 x 2 x 55 5/8-11 x 2-1/4 M20 x 2.5 x 70 3/4-10 x 2-3/4
Bolt Hole Spacing A mm (inch) Type I Type II (Code (Code 61) 62) 38.10 (1.50) 47.63 (1.88) 52.37 (2.06) 58.72 (2.31) 69.85 (2.75) 77.77 (3.06) 40.49 (1.57) 50.80 (2.00) 57.15 (2.25) 66.68 (2.63)
Male Half
Female Half
12 (1/2) -08 19 (3/4) -12 25 (1) -16 32 (1-1/4) -20 38 (1-1/2) -24 50 (2) -32
12.7 (.50) 19.1 (.75) 25.4 (1.00)
M8 x 1.25 x 30 5/16-18 x 1-1/4 M10 x 1.5 x 35 3/8-16 x 1-1/4 M10 x 1.5 x 30 3/8-16 x 1-1/4
Fluid Conveying
31.7 M10 x 1.5 x 40 (1.25) 7/16-14 x 1-1/2 38.0 M12 x 1.75 x 40 (1.50) 1/2-13 x 1-1/2 50.8 M12 x 1.75 x 40 (2.00) 1/2-13 x 1-1/2
79.38 (3.13) 96.82 (3.81)
This connection is commonly used in fluid power systems. There are two pressure ratings. Type I (Code 61) is referred to as the standard series and Type II (Code 62) is the 6000 PSI series. The design concept for both series is the same, but the bolt spacing and flanged head diameters are larger for the higher pressure, Type II connection. Both metric and inch bolts are used.
Flanged Head Diameter K mm (inch) Inch Size 1/2 3/4 1 1-1/4 1-1/2 2 Type I (Code 61) 30.18 (1.19) 38.10 (1.50) 44.45 (1.75) 50.80 (2.00) 60.33 (2.38) 71.42 (2.81) Type II (Code 62) 31.75 (1.25) 41.28 (1.63) 47.63 (1.88) 53.98 (2.13) 63.50 (2.50) 79.38 (3.13)
1347
Thread Size Chart
Dash Size -02 -03 -04 -05 -06 -07 -08 -10 -12 -14 -16 -20 -24 -32 -40 -48 -64
N.P.T.F. 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2 2-1/2-8 3-8 4-8
N.P.S.M. apprx. dia. 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2 2-1/2-8 3-8
SAE 45 auto. refrig. 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-24 3/4-16 7/8-14 1-1/16-14
SAE 37 (JIC) hydraulic 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12 3-12 3-1/2-12
SAE O-Ring Boss 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12 3-12 3-1/2-12
P.T.T. 30 automotive
SAE Inverted Flare 5/16-24 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16
ORS
9/16-18 11/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12 1-11/16-12 2-12
1-5/16-14 1-5/8-14 1-7/8-14 2-1/2-12
Fluid Conveying
1348
Thread Style Pressure Performance Maximum Operating Pressure Eaton-Aeroquip (Steel Products)
The table below is a breakdown of hydraulic pressure performance by thread style and size for Aeroquip steel products. The table is based on limited laboratory test data and is intended only as an approximate guide to field performance of Aeroquip products. Figures shown are maximum operating pressure in psi, based upon a 4:1 safety factor relative to the connection minimum burst pressure. Testing was conducted at SAE recommended assembly torque in hardened test blocks. The pressure rating must be adjusted for any change in mating part material. The maximum operating pressure for the adapter or tube fitting body must be the lower of the chosen mating end types.
Dash Size -2 -4 -5 -6 -8 -10 -12 -14 -16 -20 -24 -32
Inch Size 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
SAE100R2 Maximum Operating Pressure 5000 4250 4000 3500 2750 2250 2000 2000 1625 1250 1125
SAE 37 Male Flare (JIC) 8500 8500 7000 6000 5500 4000 4000 3500 3500 2000 1250
SAE 37 Female Swivel (JIC) 5500 5000 4000 4000 3000 3000 3000 2500 2000 1500 1250
Male Pipe NPTF 10000 9500 8000 6000 5000 4000 3000 2000 2000
Female Pipe NPTF 5000 4500 3500 3500 3000 2500 2000 1500 1400
Female Pipe Swivel NPSM 6000 5000 4000 3500 3500 3000 2000 1500 1500
Male O-Ring Boss non-ORS 7500 7500 7500 7500 7500 5000 5000 4500 4500 3500 2000
Straight Thread O-Ring Adjust. non-ORS 4500 3500 4000 4000 4000 3500 3000 2500 2000 2000
Female O-Ring Boss 4500 3500 3500 3000 2500 1800 1700 1600 1500 1500
Dash Size -2 -4 -5 -6 -8 -10 -12 -14 -16 -20 -24 -32
Inch Size 1/8 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 2
SAE100R2 Maximum Operating Pressure 5000 4250 4000 3500 2750 2250 2000 2000 1625 1250 1125
Male ORS 9000 9000 9000 9000 6000 6000 4500 4000
Female ORS Swivel 9000 9000 8000 8000 6000 6000 4500 4000
Male O-Ring Boss (ORS) 9000 9000 9000 9000 6000 6000 4500 4000
Straight Thread O-Ring Adjust. (ORS) 6000 6000 6000 6000 6000 5000 4500 3000
Male SAE Flareless 6000 6000 6000 6000 4500 4000
Split Flange Code 61
Split Flange Code 62
5000 5000 5000 4000 3000 3000
6000 6000 6000 6000 6000 6000
WARNING
Pressure ratings for Brennan and Eaton-Winner adapters may not be the same as listed on this page. Contact us for more information.
1349
Working Pressure Tables Brass & Stainless Steel Adapters
Eaton Brass Adapters

Eaton Fitting Types Pipe Fitting Material Tube Size (O.D. range in inches) Maximum Working Pressure (psi) Depends on tubing material, O.D., wall thickness and fitting size Brass 1/8 to 3/4 1200 Inverted Flare Brass 1/8 to 1 2000 SAE 45 Flare Brass 1/8 to 3/4 2000
SSP Stainless Steel Adapters

Tapered Thread Working Pressure Stainless (psi) Nominal 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 BSPT 1/8-28 1/4-19 3/8-19 1/2-14 3/4-14 1-11 1-1/4-11 1-1/2-11 2-11 NPT 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2 Male 10050 8050 7850 7750 7350 5350 3450 4550 3050 Female 6550 6650 5350 4950 4650 4450 1800 2800 2450 SAE 5/16-24 7/16-20 9/16-18 3/4-16 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12 BSPP 1/8-28 1/4-19 3/8-19 1/2-14 3/4-14 1-11 1-1/4-11 1-1/2-11 2-11 Parallel Thread Working Pressure Stainless (psi) Male 6000 6000 6000 6000 4800 3600 3000 2400 1800 Female 5500 5400 5400 4800 4200 2400 2000 1800 1500
Fluid Conveying
Source: ANSI/ASME B31.3
1350
Recommended Assembly Torque
The use of a torque wrench is recommended to assure proper assembly of these connections. Thread Size (inches) 9/16-18 11/16-16 13/16-16 1-14 1-3/16-12 1-7/16-12 1-11/16-12 2-12 Swivel Nut Torque (ft. pounds) 10-12 18-20 32-35 46-50 65-70 92-100 125-140 150-165 Thread Size (inches) 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12 Swivel Nut Torque (ft. pounds)
Dash Size -04 -06 -08 -10 -12 -16 -20 -24
Dash Size -02 -03 -04 -05 -06 -08 -10 -12 -14 -16 -20 -24 -32
ORS
SAE 37 (JIC)
11-12 15-16 18-20 38-42 57-62 79-87 108-113 127-133 158-167 245-258
Dash Size -03 -04 -05 -06 -08 -10 -12 -14 -16 -20 -24 -32
Thread Size (inches) 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12
Jam Nut or Straight Fitting Torque (ft. pounds) 8-9 13-15 14-15 23-24 40-43 43-48 68-75 83-90 112-123 146-161 154-170 218-240
Straight Thread O-Ring Boss Low Pressure with 37 (SAE J514)
Thread Size (mm) M10 x 1 M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M20 x 1.5 M22 x 1.5 M26 x 1.5 M27 x 2 M33 x 2 M42 x 2 M48 x 2
Straight Adapter or Locknut Torque (ft. pounds) 13-15 15-19 19-23 33-40 37-44 52-66 55-70 81-96 96-111 162-184 170-192 258-347
Fluid Conveying
Metric
Dash Size -03 -04 -05 -06 -08 -10 -12 -14 -16 -20 -24
Thread Size (inches) 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12
Jam Nut or Straight Fitting Torque (ft. pounds) 8-10 14-16 18-20 24-26 50-60 72-80 125-135 160-180 200-220 210-280 270-360
Straight Thread O-Ring Boss High Pressure with ORS (SAE J1453)
Thread Size (inches)** G 1/8-28 G 1/4-19 G 3/8-19 G 1/2-14 G 3/4-14 G 1-11 G 1-1/4-11 G 1-1/2-11
Straight Adapter or Locknut Torque (ft. pounds) 13-15 19-23 33-40 55-70 102-118 162-184 170-192 258-347
BSPP **G denotes parallel threads, other than ISO 6149. (Port connection only)
1351
Hose & Hose Assembly Ordering and Length Tolerances

Part Numbers and dash sizes Dash size designates the nominal size in 16ths of an inch. This number immediately follows the part number and is separated from it with a dash. Hose Assemblies Aeroquip manufacturers the terminal ends of their hose fittings to the appropriate requirements established by the SAE. Therefore, the performance ratings of these hose fittings meet the SAE requirements. It is possible to order a hose assembly with a fitting terminal end that has a performance rating lower than the hose rating. When ordering hose assemblies, please keep the connecting end performance rating in mind since this may affect overall hose assembly performance. See Thread Style Pressure Performance on page 1349 . Cut Length Hose Cut lengths should be as ordered as shown below by specifying lengths in inches. FC300 - 08 - 00484 Hose type Hose size (in 16ths of an inch) Cut length (in inches) Last digit is in 1/8ths of an inch (00484 = 48-1/2 inches) Length Tolerances Length tolerances for hose, hose assemblies and protective sleeve is: Up to and including 12 inches: 1/8 inch Above 12 inches to and including 18 inches: 3/16 inch Above 18 inches to and including 36 inches: 1/4 inch Above 36 inches: 1% of length
Fluid Conveying
1352
Hose Assembly Flow Capacity at Suggested Flow Velocities
1353
Hose Assembly Pressure Drop
Fluid Conveying
1354
Important Safety Information (Hose & Fittings) WARNING
General guidelines for selection, installation and maintenance of hose assemblies. Please read these general instructions carefully.
HOSE AND HOSE ASSEMBLIES HAVE A FINITE LIFE and there are a number of factors which will reduce its life.
These general instructions are intended as a guide to assist system designers and/or users in the selection, installation, and maintenance of hose assemblies. The designers and users must make a systematic review of each application and then select, install, and maintain the hose assemblies to fulfill the requirements of the application. The following are general guidelines and are not necessarily a complete list. WARNING: IMPROPER SELECTION, INSTALLATION, OR MAINTENANCE MAY RESULT IN PREMATURE FAILURES, BODILY INJURY, OR PROPERTY DAMAGE.
SELECTIONThe following is a list of factors which must be considered before final hose selection can be made:
PressureAfter determining the system pressure, hose selection must be made so that the recommended maximum operating pressure is equal to or greater than the system pressure. Surge pressures higher than the maximum operating pressure will shorten hose life and must be taken into account by the hydraulic designer. SuctionHoses used for suction applications must be selected to insure the hose will withstand the negative pressure of the system. TemperatureCare must be taken to insure that fluid and ambient temperatures, both static and transient, do not exceed the limitations of the hose. Special care must be taken when routing near hot manifolds. Fluid CompatibilityHose selection must assure compatibility of the hose tube, cover and fittings with the fluid used. Additional caution must be observed in hose selection for gaseous applications. SizeTransmission of power by means of pressurized fluid varies with pressure and rate of flow. The size of the components must be adequate to keep pressure losses to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. RoutingAttention must be given to optimum routing to minimize inherent problems. EnvironmentCare must be taken to insure that the hose and fittings are either compatible with or protected from the environment to which they are exposed. Environmental conditions such as ultraviolet light, ozone, salt water, chemicals, and air pollutants can cause degradation and premature failure and, therefore, must be considered. Mechanical LoadsExternal forces can significantly reduce hose life. Mechanical loads which must be considered include excessive flexing, twist, kinking, tensile or side loads, bend radius, and vibration. Use of swivel-type fittings or adapters may be required to insure no twist is put into the hose. Unusual applications may require special testing prior to hose selection. AbrasionWhile hose is designed with a reasonable level of abrasion resistance, care must be taken to protect the hose from excessive abrasion which can result in erosion, snagging and cutting of the hose cover. Exposure of the reinforcement will significantly accelerate hose failure. Proper End FittingCare must be taken to insure proper compatibility exists between the hose and coupling selected based on the manufacturers recommendations substantiated by testing to industry standards such as SAE J517. End fitting components from one manufacturer are usually not compatible with end fitting components supplied by another manufacturer (i.e., using a hose fitting nipple from one manufacturer with a hose socket from another manufacturer). It is the responsibility of the fabricator to consult the manufacturers written instructions or the manufacturer directly for proper end fitting componentry. LengthWhen establishing proper hose length, motion absorption, hose length changes due to pressure, as well as hose and machine tolerances must be considered. Specifications and StandardsWhen selecting hose, government, industry and manufacturers specifications and recommendations must be reviewed as applicable. Hose CleanlinessHose components vary in cleanliness levels. Care must be taken to insure that the assemblies selected have an adequate level of cleanliness for the application. Electrical ConductivityCertain applications require that hose be nonconductive to prevent electrical current flow. Other applications require the hose to be sufficiently conductive to drain off static electricity. Hose and fittings must be chosen with these needs in mind.
Important Safety, Fluid Compatibility & Hose Routing & Installation Guidelines are continued on next page
1355
Important Safety Information (Hose & Fittings) WARNING

Refer to safety information regarding hose & fittings starting on page 1355
General guidelines for selection, installation and maintenance of hose assemblies.

continued from previous page
INSTALLATIONAfter selection of proper hose, the following factors must be considered by the installer:
Pre-Installation Inspection Prior to installation, a careful examination of the hose must be performed. All components must be checked for correct style, size and length. In addition, the hose must be examined for cleanliness, I.D. obstructions, blisters, loose cover, or any other visible defects. Follow Manufacturers Assembly InstructionsHose assemblies may be fabricated by the manufacturer, an agent for or customer of the manufacturer, or by the user. Fabrication of permanently attached fittings to hydraulic hose requires specialized assembly equipment. Fieldattachable fittings (screw style and segment clamp style) can usually be assembled without specialized equipment although many manufacturers provide equipment to assist in the operation. Hose from one manufacturer is usually not compatible with fittings supplied by another manufacturer. It is the responsibility of the fabricator to consult the manufacturers written assembly instructions or the manufacturers directly before intermixing hose and fittings from two manufacturers. Similarly, assembly equipment from one manufacturer is usually not interchangeable with that of another manufacturer. It is the responsibility of the fabricator to consult the manufacturers written instructions or the manufacturer directly for proper assembly equipment. Always follow the manufacturers instructions for proper preparation and fabrication of hose assemblies. Minimum Bend Radius Installation at less than minimum bend radius may significantly reduce hose life. Particular attention must be given to preclude sharp bending at the hose/fitting juncture. Twist Angle and Orientation Hose installations must be such that relative motion of machine components produces bending of the hose rather than twisting. SecurementIn many applications, it may be necessary to restrain, protect, or guide the hose to protect it from damage by unnecessary flexing, pressure surges, and contact with other mechanical components. Care must be taken to insure such restraints do not introduce additional stress or wear points. Proper Connection of Ports Proper physical installation of the hose requires a correctly installed port connection while insuring that no twist or torque is put into the hose. Avoid External DamageProper installation is not complete without insuring that tensile loads, side loads, kinking, flattening, potential abrasion, thread damage, or damage to sealing surfaces are corrected or eliminated. System Check OutAfter completing the installation, all air entrapment must be eliminated and the system pressurized to the maximum system pressure and checked for proper function and freedom from leaks. NOTE: Avoid potential hazardous areas while testing.
Fluid Conveying
MAINTENANCEEven with proper selection and installation, hose life may be significantly reduced without a continuing maintenance
program. Frequency should be determined by the severity of the application and risk potential. A maintenance program should include the following as a minimum: Hose StorageHose products in storage can be affected adversely by temperature, humidity, ozone, sunlight, oils, solvents, corrosive liquids and fumes, insects, rodents and radioactive materials. Storage areas should be relatively cool and dark and free of dust, dirt, dampness and mildew. Visual InspectionAny of the following conditions requires replacement of the hose: (a) Leaks at fitting or in hose (leaking fluid is a fire hazard). (b) Damaged, cut, or abraded cover (any reinforcement exposed). (c) Kinked, crushed, flattened, or twisted hose. (d) Hard, stiff, heat cracked or charred hose. (e) Blistered, soft, degraded, or loose cover. (f) Cracked, damaged, or badly corroded fittings. (g) Fitting slippage on hose. Visual InspectionThe following items must be tightened, repaired, or replaced as required: (a) Leaking port conditions. (b) Clamps, guards, shields. (c) Remove excessive dirt buildup. (d) System fluid level, fluid type, and any air entrapment. Functional TestOperate the system at maximum operating pressure and check for possible malfunctions and freedom from leaks. NOTE: Avoid potential hazardous areas while testing. Replacement IntervalsSpecific replacement intervals must be considered based on previous service life, government or industry recommendations, or when failures could result in unacceptable down time, damage, or injury risk.
1356
Fluid Compatibility (Hose & Fittings) WARNING
Refer to safety information regarding hose & fittings starting on page 1355 Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
1357

Fluid Conveying
1358
1359

Fluid Conveying
1360
Fluid Compatibility (Fluids) WARNING
** See CAUTION on page 1360 for maximum fluid temperatures and limiting ambient temperatures. Important Safety, Fluid Compatibility & Hose Routing & Installation Guidelines are continued on next page
1361

Fluid Conveying
** See CAUTION on page 1360 for maximum fluid temperatures and limiting ambient temperatures.
1362
** See CAUTION on page 1360 for maximum fluid temperatures and limiting ambient temperatures.
1363
Hose Routing & Installation WARNING

Fluid Conveying
1364
Important Safety Information (Tubing)
WARNING
Selection of Tubing Selecting the proper tubing for a given application is essential to the proper operation and safe use of the tubing and related equipment. Inadequate attention to the selection of the tubing for your application can result in leakage, bursting, or other failure which can cause serious bodily injury or property damage from spraying fluids or flying projectiles. In order to avoid serious bodily injury or property damage resulting from selection of the wrong tubing, you should carefully review the information in this catalog. Some of the factors that are involved in the selection of the proper tubing are: material of tubing bends tubing size temperature tubing length tubing pressure rating tubing end connections installation design fluid conveyed (compatibility). These factors and the other information in this catalog should be considered by you in selecting the proper tubing for your application. If you have any questions regarding the proper tubing for your application, please contact us. Proper Selection of Tube Fittings Selection of the proper tube fittings for the application is essential to the proper operation and safe use of tubing and related equipment. Inadequate attention to the selection of the end fittings for your application can result in tube leakage, bursting, or other failure which can cause serious injury or property damage from spraying fluids or flying projectiles. In order to avoid serious bodily injury or property damage resulting from selection of the wrong tube end fitting, you should carefully review the information in this catalog. Some of the factors which are involved in the selection of the proper tube end fittings are: tube fitting installation design compatibility with tubing tubing size temperature corrosion requirements. These factors and the other information in this catalog should be considered by you in selecting the proper tube end fitting for your application. If you have any questions regarding the proper tube end fittings for your application, please contact us. Tubing Installation Proper installation of the tubing is essential to the proper operation and safe use of the tubing and related equipment. Improper installation of the tubing can result in serious injury or property damage. In order to avoid serious bodily injury or property damage resulting from improper installation of the tubing, you should carefully review the information in this catalog regarding tubing installation. Some of the factors you must consider in installing the tubing properly are: proper installation procedures changes in length protection from high temperature sources twisting stress rubbing and abrasion. These factors and other information in this catalog regarding tubing installation should be considered by you before installing the tubing. If you have any questions regarding proper installation of the tubing, please contact us.
Important Safety, Chemical Compatibility & Installation Guidelines are continued on next page
1365
Important Safety Information (Tubing)
WARNING
Tubing Assembly Changes in materials, finishes, and assembly techniques may affect the sealing or holding capability of the joint. Due to the great variety of possible assembly scenarios, assembly procedures should be tested to determine if the joint is adequate for its intended use. We stress the importance of referring to assembly instructions on page 9 for determining the appropriate tightening procedure. Improper assembly or overtightening could result in fitting leakage, tubing separation or other failures which could cause serious bodily injury or property damage from spraying fluids or flying projectiles. These factors and other information in this catalog regarding tubing assembly should be considered by you before installing the tubing. If you have any questions regarding proper assembly and installation of the tubing, please contact us. Fitting Dimensions Eaton molded compression fittings as described in this catalog may not reflect running changes made to improve part performance. Check with us in critical applications. Operating Pressures Operating pressures of Eaton molded compression fittings are regulated by ambient and fluid temperatures, type of fluid being carried, tubing type and conditions of mechanical abuse. Pressures in excess of above specifications in all fitting sizes should be tested by the customer for their particular application.
Fluid Conveying
1366
Chemical Compatibility Information (Tubing) WARNING
Refer to safety information regarding tubing starting on page 1365 These tables alphabetically list commonly used materials of various chemical composition. After each agent listing you will find the basic tubing and fitting materials rated according to their chemical resistance to each individual agent. The chart is intended to be used as a guide only. Many factors (concentration, temperature, intermittent or continuous exposure, etc.) have a bearing upon the suitability of any tubing or connector for any specific application, and these factors must be considered by you as you review the chemical compatibility chart. Where unusual conditions exist or where questions arise, consult us for expert assistance on your tubing application requirements. Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
NOTE: All data given herein is believed to be accurate and reliable but presented without guarantee, warranty, or responsibility of any kind, express or implied, on our part. Chemical resistance will vary with the wide diversity of possible mixtures and service conditions. It is not therefore possible to give any guarantee whatsoever in individual cases. CODES: G=Good Resistance F=Fair Resistance X=Incompatible =No data available + Call Technical Support for specific application
1367

Fluid Conveying
1368
Refer to safety information regarding tubing starting on page 1365 Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information
1369

Fluid Conveying
1370
1371
Tubing Selection WARNING

To select tubing for a particular installation, two factors must be determined... 1.) Tubing Type - material and construction and 2.) Size - inside diameter (I.D.) and wall thickness. Information below will aid in your tubing selection.
TUBING TYPES
Commercial tubing is available in a wide variety of materials, types of construction and quality. Each is best suited for certain specific applications. STEEL TUBING - Seamless SAE 1010 fully annealed and SAE welded types suitable for bending and flaring. This is the only tubing material approved without restrictions by SAE standards. STAINLESS STEEL TUBING - Both seamless *18-8 fully annealed and welded types suitable for bending and flaring. Stainless steel tubing is recommended for use with very high pressures and where large diameter tubing is required. It is also suited for many applications where corrosion is a problem. * (302, 303 and/or 304) ALUMINUM TUBING - Seamless annealed is approved by SAE for low pressure applications. COPPER TUBING - Seamless fully annealed coils and fully annealed or quarter-hard straight lengths can be used for systems that do not use petroleum based fluids (copper acts as an oil-oxidation catalyst, causing sludge). Copper also tends to work harden when flared or bent and has poor resistance to vibration. Therefore, the use of copper tubing is limited to low-pressure stationary applications and air circuits. SPECIAL ALLOY TUBING - May be required for specific corrosion problems. Information on these applications can be obtained from your tubing supplier or from tubing manufacturers.
Fluid Conveying
TUBING SIZE
The two variables in tubing size are the inside diameter (ID) and the wall thickness. Each of these is dependent upon a number of factors. INSIDE DIAMETER - The tubing I.D. will determine the flow and velocity of the fluid in the system. Flow is the volume of fluid that is to be moved through the line to perform a given job within a specified time. Flow rate is expressed in gallons per minute (gpm). Velocity is the rate of speed at which the fluid passes through the line. It is expressed in feet per second (fps). With a given flow rate, the velocity will increase as the inside diameter of the tubing decreases. To determine the appropriate tubing I.D. for specific flow rate and velocity, refer to the Velocity vs. Flow chart on page 1374 . WALL THICKNESS - The required wall thickness of the tubing depends upon operating pressure, safety factor, temperatures, and tubing material. Operating Pressure is the pressure of the fluid in the system. It is expressed in pounds per square inch (psi). Safety Factor is a multiplier applied to the wall thickness that compensates for additional mechanical strains and hydraulic shocks to which the tubing may be subjected during operation. To determine the appropriate wall thickness, refer to the data starting on page 1375 .
PRESSURE DROP
Total pressure supplied to a line must equal usable pressure (or output) plus the pressure that is lost through fluid transmission, which is referred to as pressure drop. These pressure drops cause loss of energy and should be kept to a minimum. Elements which cause pressure drop in the transmission of fluids include sudden enlargements or contractions, bends, fittings and valves. Mathematical analysis of pressure drop, although possible, is not precise because of the interrelationship of factors such as fluid velocity, density, flow area and friction coefficients. Therefore, to obtain optimum efficiency, the system (or the questionable portions of the system) should be mocked-up to obtain empirical pressure drop data.
1372
Refer to safety information regarding tubing starting on page 1365 STANDARD SIZE HYDRAULIC TUBING Hydraulic Power & Control
Following is a typical problem that illustrates, step by step, the procedure for determining tube size. Select 1010 steel tubing with the appropriate I.D. and wall thickness for the following conditions: Flow 5 gpm Velocity not to exceed 10 fps Pressure 2000 psi Safety Factor 4:1 SOLUTION: 1. Using the Flow/Velocity chart on page 1374 , follow the horizontal flow line (5 gpm) until it intersects the vertical velocity line (10fps). From this point, follow the diagonal line upward to get the required tube I.D. (.444). If the horizontal flow line and the vertical velocity line intersect between two diagonal lines, normally the larger inside diameter would be selected since it would mean less velocity. 2. Refer to the chart of Standard Size Hydraulic Tubing, at right. Note that .444 I.D. tubing is not listed. If you want to use standard tubing, select one with a larger I.D. Do not select a smaller size since this would increase the velocity to over the 10 fps limit. Therefore, by going to the next largest size, you would select the 5/8" O.D. tubing having an I.D. of .459 and a wall thickness of .083. 3. To determine whether this tubing will meet the pressure and safety factor requirements, refer to the Recommended Wall Thickness data on pages 24 and 25. For 5/8" O.D. tubing at 2000 psi, the chart for 1010 steel indicates that the minimum wall thickness with a safety factor of 4:1 is .04545. Since you have selected a tubing with a .083 wall, this would easily fulfill the requirements. However, for savings on weight and cost, you can select another tubing with a thinner wall that will still meet the performance requirements. Therefore, refer again to the chart on standard size tubing and select a tubing with a wall thickness closer to the minimum requirements. This would be the 5/8" O.D. tubing with a .527 I.D. and a .049 wall. This tubing will handle the pressure requirements of 2000 psi with a safety factor of 4:1, and also provides the required flow while keeping the velocity within the 10 fps limitation.
1373

Fluid Conveying
TO FIND REQUIRED TUBE I.D. (Flow20 gpm Velocity9 fps) Follow horizontal flow line (20 gpm) until it intersects vertical velocity line (9 fps). From this point follow diagonal line to get required Tube I.D. (.944). TO FIND PERMISSIBLE FLOW (Velocity15 fps Tube I.D..495) Follow vertical velocity line (15 fps) until it intersects diagonal line representing .495 tube I.D. Then project this point horizontally to get the permissible flow(9 gpm). TO FIND VELOCITY OF FLUID IN SYSTEM (Flow6 gpm Tube I.D..694) Follow horizontal flow line (6 gpm) until it intersects diagonal line representing .694 tube I.D. Then project this point vertically downward to get the velocity of fluid (5 fps).
1374
SHADED AREAS Tubing wall thickness listed in the shaded areas are generally either too light or too heavy for practical applications, and are listed only to provide data for accurate computation.
1375

Fluid Conveying
SHADED AREAS Tubing wall thickness listed in the shaded areas are generally either too light or too heavy for practical applications, and are listed only to provide data for accurate computation.
1376
Refer to safety information regarding tubing starting on page 1365 Hydraulic Power & Control
These tables provide data on required wall thickness for various sizes and pressures, and when to use flared or flareless fittings. Although heavier wall tubing can be ordered for higher operating pressures, only standard size hydraulic tubing is listed in these tables. High temperature effects are not considered in these tables.
Both JIC 37 flare or flareless recommended. Only flareless recommended. NOTE: Only flareless fittings can be used with high pressure, heavy wall tubing which is impractical to flare.
1377

These tables provide data on required wall thickness for various sizes and pressures, and when to use flared or flareless fittings. Although heavier wall tubing can be ordered for higher operating pressures, only standard size hydraulic tubing is listed in these tables. High temperature effects are not considered in these tables.
Fluid Conveying
Both JIC 37 flare or flareless recommended. Only flareless recommended. NOTE: Only flareless fittings can be used with high pressure, heavy wall tubing which is impractical to flare.
1378
Tubing Installation Guidelines WARNING
Refer to safety information regarding tubing starting on page 1365 Hydraulic Power & Control Pneumatic Power & Control
Nearly all industrial equipment now in service makes some use of fluid lines. From an economic point of view, the best fluid lines system is that which is easiest to maintain at the lowest original cost. The use of tubing and tube fittings on lines up to 2 diameter is usually more economical than the use of pipe and pipe fittings in modern installations. A few of the more important reasons follow: 1. Size for size, tubing is lighter weight, easier to handle and can be bent more easily than iron pipe. 2. Ductile hydraulic tubing reduces the number of connections required, thus reducing material and labor costs. Bent tubing also reduces pressure drop and turbulence in the system. 3. Fewer joints means lower costs and fewer points of potential leakage. 4. The use of tube fittings makes every joint a union, permitting easier, faster maintenance and repair work. 5. Modern flared and flareless tube fittings eliminate the need for threading, soldering, or welding. TUBE BENDING Tubing should be bent wherever possible to reduce the number of fittings. Copper tubing can be bent easily with a hand bender. Steel tubing can be bent in sizes 1/8 to 5/8 O.D. by using a hand bender designed for steel tubing. For production quantities, or for sizes larger than 5/8 O.D., a power bender is generally used. Tubing should be bent accurately. Tubing manufacturers will advise the correct radii for various types and wall thicknesses of tubing. Kinks, flattened bends, wrinkles and tube breakage or loss should be avoided by the use of proper tube bending equipment. PRECAUTIONS Avoid straight line connections wherever possible, especially in short runs. Design piping systems symmetrically. They are easier to install and present a neat appearance. Care should be taken to eliminate stress from tubing lines. Long tubing runs should be supported by brackets or clips. All parts installed on tubing lines such as heavy fittings, valves, etc., should be bolted down to eliminate tubing fatigue. Before installing tubing, inspect the tube to see that it conforms to the required specifications, is of the correct diameter and wall thickness and is not out of round. Cut tube ends reasonably square and lightly deburr inside and outside edge. Chamfer on outside edge will destroy bearing of tube end on the fittings seat. To avoid difficulty in assembly and disconnecting, a sufficient straight length of tube must be allowed from the end of the tube to the start of the bend. Allow twice the length of the nut as a minimum. Tubes should be formed to assemble with true alignment to the center line of the fittings, without distortion or tension. Tubing which has to be sprung from position, A, (see Fig. 4), to be inserted into the fitting has not been properly fabricated, and when so installed and connected, places the tubing under stress. When assembling the tubing, insert the longer leg to the fitting as at C (Fig. 4). With the nut free, the short leg of the tubing can be easily moved and brought to proper position with and inserted into the seat in fitting D. The nuts can then be tightened as required.
1379
Industrial Hose & Fittings NAHAD Pressure Guideline Chart

Information in this chart can be found on the NAHAD (National Association of Hose & Accessories Distributors) web site, http://www.nahad.org. Mark hose assembly with pressure on this chart or hose working pressure, whichever is lower. All pressure recommendations are in pounds per square inch (PSI). 1. In lieu of an actual test to certify the pressure rating of a specific hose, fitting and fitting attachment method, use the information in these charts as a general guideline. This chart applies to metal couplings for ambient temperature (70F) applications with true I.D. hose. It assumes new fittings, new clamps, new hose and proper installation by a qualified assembler using proper procedures and equipment. 2. This chart does not apply to used hose, in non-approved or unsupported applications ir in non-standard assemblies. 3. DO NOT use this chart if it conflicts with the hose manufacturers recommendations. 4. All hose assemblies should be pressure tested to hose manufacturers specifications prior to being put in service. Note: We will pressure test, if required, for a fee. Otherwise, pressure testing is the customers responsibility. 5. Coupling retention can vary with changes in hose design. 6. All hose assembly components must be compatible with the materials and environments with which they are to come in contact. 7. It is recommended that all hose assemblies be marked with the assembly working pressure and media of the intended application. Under no circumstances should the assembly working pressure exceed the working pressure of the lowest rated component. Note: We will label, if required, for a fee. Otherwise, labeling is the customers responsibility. 8. For applications requiring higher temperatures than 70F ambient, or for general application assistance, contact us. Attachment Method 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3
Hose
Fitting
Special Notes
Fluid Conveying
ALL PRESSURE RECOMMENDATIONS ARE UP TO OR HOSE RATING, WHICHEVER IS LOWER Machined Air Short Crimp 200 150 150 100 100 100 (Soft Wall) Shank Machined Air Pinch Short 100 100 100 100 100 100 (Soft Wall) Shank Clamps Machined Air Short (Soft Wall) Shank Machined Air (Soft Wall) Medium Shank Machined Air (Soft Wall) Medium Shank Machined Air (Soft Wall) Medium Shank Machined Air Long (Soft Wall) Shank Machined Air Long (Soft Wall) Shank Machined Air Long (Soft Wall) Shank Air Universal (Soft Wall) Air Universal (Soft Wall) Air (Soft Wall) Universal Crimp Air Or Swage Crimp Air Or Swage Ground Air Joint Preformed Clamps Band & Buckle Pinch Clamps Preformed Clamp Band & Buckle Pinch Clamps Preformed Clamps Crimp Interlocking Preformed Clamps Crimp Swage 150 150 220 220 300 300 300 300 300 300 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 450 600 500 600 500 450 230 400 400 230 2 clamps on 3/4 to 1 1 clamp on 3/8 to 5/8 225 225 200 200 175 175 100 100 100 100 100 100 300 300 250 200 200 150 150 300 150 300 125 250 125 250 125 125 250 200 200 150 150 100 100 100 225 225 200 200 175 175 3 bands on 3, 4 & 6 75 2 bands on rest 2 clamps on 1/2 to 1 1 clamps on 1/4 & 3/8 3 clamps on 3, 4 & 6 50 1 clamp on 1/4 to 5/8 2 clamps on rest 5 bands on 3, 4 & 6 100 4 bands on 2 & 2-1/2 3 bands on rest 2 clamps on 1/2 to 1 1 clamp on 1/4 & 3/8 5 clamps on 3, 4 & 6 75 4 clamps on 2 & 2-1/2 3 clamps on rest
Interlocking 600 600 600
Continued on next page
1380
Industrial Hose & Fittings NAHAD Pressure Guideline Chart, continued from previous page
Hose Asphalt & Hot Tar Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Plastic) Chemical (Rubber) Food Grade (Regulated) Food Grade (Unreg.)
Fitting Ground Joint Cam & Groove Cam & Groove Cam & Groove Cam & Groove Crimp or Swage Crimp or Swage Machined Medium Shank Machined Medium Shank Machined Long Shank Machined Long Shank
Special Notes
ALL PRESSURE RECOMMENDATIONS ARE UP TO OR HOSE RATING, WHICHEVER IS LOWER Interlocking Crimp Swage Preformed Clamps Band & Buckle Crimp Swage Preformed Clamps Band & Buckle Preformed Clamps Band & Buckle 150 150 150 600 600 125 600 600 600 600 125 125 150 150 125 600 250 250 250 250 125 125 600 250 250 125 150 600 600 125 150 150 200 600 250 250 125 150 400 600 125 150 150 175 600 250 250 100 125 350 600 100 125 125 150 450 150 150 75 100 600 600 75 100 100 125 450 230 125 100 125 100 75 75 50 50
300 500 600 500 75 75 75 50 50 50
400 400 3 clamps on 3 &4 2 clamps on rest 3 bands on 3 &4 2 bands on rest 5 clamps on 3 & 4 4 clamps on 2 & 2-1/2 3 clamps on rest 5 bands on 3 & 4 4 bands on 2 & 2-1/2 3 bands on rest
100 75
Data for these categories will be added to this table as we start stocking hose for these categories. In the meantime, please see NAHAD web site for this data (http://www.nahad.org).

1381
Hose
Fitting
Special Notes
Layflat Layflat Layflat Layflat Layflat
Fluid Conveying
ALL PRESSURE RECOMMENDATIONS ARE UP TO OR HOSE RATING, WHICHEVER IS LOWER Cam & Crimp 250 250 150 125 100 75 50 Groove Cam Preformed & 250 250 150 125 100 75 50 Clamps Groove Cast Machined Medium Shank Machined Long Shank Cam & Groove Cam & Groove Cam & Groove Cam & Groove Machined Medium Shank Machined Medium Shank Machined Medium Shank Machined Long Shank Machined Long Shank Preformed Clamps Preformed Clamps Preformed Clamps Crimp Swage Preformed Clamps Band & Buckle Bolt Clamp Preformed Clamps Band & Buckle Bolt Clamp Preformed Clamps 75 250 300 250 250 250 250 250 250 300 300 300 75 200 250 250 250 250 250 200 200 250 250 250 50 150 175 150 150 150 150 150 150 175 175 175 50 50 50 25 3 clamps on 3, 4, 5 & 6 2 clamps on rest 3 clamps on 3, 4, 5 & 6 50 2 clamps on rest
125 100 75
5 clamps on 3, 4, 5 & 6 150 125 100 75 3 clamps on 1-1/2 4 clamps on rest 125 100 75 125 100 75 125 100 75 125 100 75 125 100 75 125 100 75 75 75 75 75 75
Material Handling Material Handling Material Handling Material Handling Material Handling (soft wall) Material Handling Material Handling Material Handling (soft wall) Material Handling
3 clamps on 3, 4, 5 & 6 75 1 clamp on up to 5/8 2 clamps on rest 3 bands on 3, 4, 5 & 6 150 125 100 100 1 bands on up to 5/8 2 bands on rest 150 125 100 75 5 clamps on 3, 4, 5 & 6 150 125 100 100 4 clamps on 2 & 2-1/2 3 clamps on rest
1382
Hose
Fitting
Special Notes
ALL PRESSURE RECOMMENDATIONS ARE UP TO OR HOSE RATING, WHICHEVER IS LOWER Machined Band 5 bands on 3, 4, 5 & 6 Material Long & 375 325 250 200 150 125 125 4 bands on 2 & 2-1/2 Handling Shank Buckle 3 bands on rest Material Handling Cast Bolt Clamp 75 75 50 50 50 50 25 (soft wall) Material Preformed Cast 75 75 50 50 50 50 25 Handling Clamps Band Material Cast & 75 75 50 50 50 50 25 Handling Buckle Crimp Material or Crimp 600 600 600 600 500 450 400 Handling Swage Crimp Material or Swage 600 600 600 600 500 450 400 Handling Swage Material Internal Internal 800 800 600 600 500 400 Handling Expansion Expansion Material Crimp Handling or Crimp 600 600 600 600 600 600 500 450 400 erosion is very possible (Cement) Swage Material Crimp Handling or Swage 600 600 600 600 600 600 500 450 400 erosion is very possible (Cement) Swage Material Handling Ground Interlocking 600 600 600 600 450 450 230 230 erosion is very possible Joint (Cement) Material Internal Internal Handling Expansion 800 800 800 800 600 600 500 400 erosion is very possible Expansion (Cement) Cam Band Petroleum & & 250 250 250 150 125 100 75 75 Transfer Groove Buckle Cam Petroleum & Crimp 150 250 250 250 250 250 150 125 100 75 75 Transfer Groove Cam Petroleum Preformed 150 250 250 250 250 250 150 125 100 75 75 & Clamps Transfer Groove

1383
Information in this chart can be found on the NAHAD (National Association of Hose & Accessories Distributors) web site, http://www.nahad.org. Mark hose assembly with pressure on this chart or hose working pressure, whichever is lower. All pressure recommendations are in pounds per square inch (PSI). 1. In lieu of an actual test to certify the pressure rating of a specific hose, fitting and fitting attachment method, use the information in these charts as a general guideline. This chart applies to metal couplings for ambient temperature (70F) applications with true I.D. hose. It assumes new fittings, new clamps, new hose and proper installation by a qualified assembler using proper procedures and equipment. 2. This chart does not apply to used hose, in non-approved or unsupported applications ir in non-standard assemblies. 3. DO NOT use this chart if it conflicts with the hose manufacturers recommendations. 4. All hose assemblies should be pressure tested to hose manufacturers specifications prior to being put in service. Note: We will pressure test, if required, for a fee. Otherwise, pressure testing is the customers responsibility. 5. Coupling retention can vary with changes in hose design. 6. All hose assembly components must be compatible with the materials and environments with which they are to come in contact. 7. It is recommended that all hose assemblies be marked with the assembly working pressure and media of the intended application. Under no circumstances should the assembly working pressure exceed the working pressure of the lowest rated component. Note: We will label, if required, for a fee. Otherwise, labeling is the customers responsibility. 8. For applications requiring higher temperatures than 70F ambient, or for general application assistance, contact us. Hose Fitting Attachment Method 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 Special Notes
ALL PRESSURE RECOMMENDATIONS ARE UP TO OR HOSE RATING, WHICHEVER IS LOWER Cam Petroleum & Swage 150 250 250 250 250 250 150 125 100 75 75 Transfer Groove Petroleum Crimp or Crimp 600 600 600 600 600 600 600 600 600 600 600 500 450 400 Transfer Swage Petroleum Crimp or Swage 600 600 600 600 600 600 600 600 600 600 600 500 450 400 Transfer Swage Petroleum Internal Internal 800 800 800 600 600 500 400 Transfer Expansion Expansion Band Petroleum Machined 1 band on 1/4 to 5/8 Medium & 300 300 250 175 150 125 100 100 2 bands on rest Transfer Shank Buckle Petroleum Machined Preformed 1 clamp on 1/4 to 5/8 Medium 125 250 250 250 250 200 150 125 100 75 75 2 clamps on rest Transfer Clamps Shank Band Petroleum Machined 4 bands on 2 & 2-1/2 Long & 375 375 325 250 200 150 125 125 3 bands on rest Transfer Shank Buckle Petroleum Machined Preformed 4 clamps on 3 & 2-1/2 Long 300 300 300 300 300 250 175 150 125 100 100 3 clamps on rest Transfer Clamps Shank Push-On Push-On N/A 175 175 175 175 150 150 200 300 300 Sand Blast Sand Blast N/A 175 175 175 175 150 150 200 300 300 Ground Steam Interlocking 600 600 600 600 600 600 450 450 230 230 Joint Cam Band Water & & 250 250 250 150 125 100 75 75 Groove Buckle Cam Water & Crimp 150 250 250 250 250 250 150 125 100 75 75 Groove Cam Preformed Water & 150 250 250 250 250 250 150 125 100 75 75 Clamps Groove Cam Water & Swage 150 250 250 250 250 250 150 125 100 75 75 Groove
Fluid Conveying
1384
Information in this chart can be found on the NAHAD (National Association of Hose & Accessories Distributors) web site, http://www.nahad.org. Mark hose assembly with pressure on this chart or hose working pressure, whichever is lower. All pressure recommendations are in pounds per square inch (PSI). 1. In lieu of an actual test to certify the pressure rating of a specific hose, fitting and fitting attachment method, use the information in these charts as a general guideline. This chart applies to metal couplings for ambient temperature (70F) applications with true I.D. hose. It assumes new fittings, new clamps, new hose and proper installation by a qualified assembler using proper procedures and equipment. 2. This chart does not apply to used hose, in non-approved or unsupported applications ir in non-standard assemblies. 3. DO NOT use this chart if it conflicts with the hose manufacturers recommendations. 4. All hose assemblies should be pressure tested to hose manufacturers specifications prior to being put in service. Note: We will pressure test, if required, for a fee. Otherwise, pressure testing is the customers responsibility. 5. Coupling retention can vary with changes in hose design. 6. All hose assembly components must be compatible with the materials and environments with which they are to come in contact. 7. It is recommended that all hose assemblies be marked with the assembly working pressure and media of the intended application. Under no circumstances should the assembly working pressure exceed the working pressure of the lowest rated component. Note: We will label, if required, for a fee. Otherwise, labeling is the customers responsibility. 8. For applications requiring higher temperatures than 70F ambient, or for general application assistance, contact us. Hose Fitting Attachment Method 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 Special Notes
Water Water Water Water Water Water Water Water Water Water Water Water Water Water (Soft Wall)
ALL PRESSURE RECOMMENDATIONS ARE UP TO OR HOSE RATING, WHICHEVER IS LOWER Band Cast & 75 75 75 50 50 50 25 25 Buckle Preformed 200 200 150 100 100 100 75 Cast 75 75 50 50 50 25 25 Clamps Crimp or Crimp 600 600 600 600 600 600 600 600 600 600 600 500 400 Swage Crimp or Swage 600 600 600 600 600 600 600 600 600 600 600 500 400 Swage Ground Interlocking 600 600 600 600 600 600 600 600 450 450 230 230 Joint Machined Short Crimp 200 150 150 100 100 100 Shank Machined Short Pinch 100 100 100 100 100 100 Shank Machined Preformed 200 150 150 100 100 100 Short Clamps Shank Machined Pinch Medium 100 100 100 100 100 100 Clamps Shank Machined 3 clamps on 3, 4 & 6 Preformed 300 300 300 300 300 250 250 Medium 125 75 75 50 50 25 25 1 clamp on 1/4 to 5/8 Clamps Shank 2 clamps on rest Machined 5 clamps on 3, 4 & 6 Preformed Long 400 400 400 300 300 150 125 100 75 50 4 clamps on 2 & 2-1/2 Clamps Shank 3 clamps on rest Universal Interlocking 110 110 110 110 110 110 Universal Preformed 110 110 110 110 110 110 Clamps Cast Bolt Clamp 200 200 150 100 100 100 Bolt Clamp 300 300 300 300 300 250 Bolt Clamp 400 400 400 300 75 250 300 75 125 150 75 75 125 50 75 100 50 50 75 50 50 50 25 25 25 25
Machined Water (Soft Wall) Medium Shank Machined Water Long (Soft Wall) Shank
1385
Industrial Hose & Fittings Temperature vs. Pressure Table for Boston Reinforced PVC Hose
This table has been prepared to demonstrate the effects of temperature vs. working pressure on Eaton Boston reinforced PVC hose products. Working pressures for PVC hoses are tested at 68F.
Temperature F 68 77 86 95 104 113 120 131 140 149 158 167 176
Allowable Percent of Original Working Pressure 2-Spiral Reinforcement 100% 86% 75% 65% 56% 47% 40% 33% 27% 23% 20% 17% 15% 4-Spiral Reinforcement 100% 90% 81% 73% 66% 59% 53% 47% 43% 40% 38% 37% 35%
Fluid Conveying
1386
Agency Hose Listings
The listings below are intended only as guides in identifying which hoses in this catalog comply with requirements of various agencies. For current and complete information, contact us. Government Agencies DOT/FMVSS - US Department of Transportation, Federal Motor Vehicle Safety Standard FDA - US Food and Drug Administration MIL/DOD - US Military Specification, Department of Defense USCG/MMT - US Coast Guard, Merchant Marine Technical (SAE J1942 has replaced USCG approval) Industry Agencies ABS - American Bureau of Shipping DIN - Deutsche (German) Industrial Norme (Replaced by EN) EN - Committee for European Normalization SAE - Society of Automotive Engineers UL - Underwriters Laboratories Manufacturer Hose Style Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip 2556 2570 2651 2661 2807 FC195 FC234 FC252 FC254 FC273 FC300 FC321 FC332 FC350 FC355 FC363 FC372 FC373 FC374 FC375 FC505 FC558 FC579 FC606 FC619 FC636 FC639 FC647 FC693 FC735 FC802 FC902 FC914 DOT FMVSS 106 Type AII 20 022 Type 2ST EN 853 Type 2ST FDA MIL DOD USCG MMT ABS DIN EN SAE J1402 100R5 100R4 100R14A 100R2A J1527 A1 100R11 100R13 100R5, J1019, J1402 UL21 106 Type AII 106 Type AII EN 855 Type R7 EN 855 Type R7 EN 855 Type R8 EN 855 Type R8 J1402 J1402 100R7 100R7 100R8 100R8 J2064 Type E J2064 Type B Class 1 100R15 100R4 100R17 UL
Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying
EN 856 Type R13
106 Type AII
EN 857 Type 2SC EN 855 Type R7 EN 855 Type R7
100R16 Type S J51 Type D 100R7 100R7
Continued on next page = See catalog page for details = Approved details available.
1387
Agency Hose Listings, continued from previous page

Manufacturer Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Aeroquip Everflex Everflex Gates Kuriyama Kuriyama Kuriyama Synflex Synflex Synflex Synflex Synflex Synflex Synflex Thermal Flex Hose Style GH134 GH195 GH663 GH493 GH781 GH793 SC STW 4219G K010 K3130 K3150 25CT 30CT 3130 3770 37AL 3800 3R80 TFC40 TFH 100 110 130 134 148 200 202V 240V 250 252 252V 272V 274V 290V 292V 327 365 MSH THH TRL USCG Type A2 Fuel USCG Type A1 Fuel MIL A-A-52426 DOT FMVSS FDA MIL DOD USCG MMT ABS DIN EN SAE J2064 Type E 100R2AT 100R1AT 100R12 100R16 100R2AT 100R14A 30R7 UL
20 022 Type 2SN EN 853 Type 2SN 20 022 Type 1SN EN 853 Type 1SN EN 857 Type 2SC 20 022 Type 2SN EN 853 Type 2SN

100R7 100R18 100R7
100R8 J20 R1 J20 R3 J2006 J2006 J20 R3 J20R3
Fluid Conveying
Thermal Flex Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine Trident Marine
J2006 J2006 J2006 J2006 J2006 J2006 J2006 J2006 J2006 J2006 J1527 A2 J1527 A1
Trident Marine Trident Marine Trident Marine
J2006 J2006
= See catalog page for details = Approved details available.
1388
Notes
1389
Notes
1390
Notes
1391
Notes
1392
Notes
1393
Notes
1394
Representative Lines
Accumulators, Inc. Adaptall Aeroquip Air Logic AIRTEC Pneumatics Alemite Alkon Allied Witan American Couplings American Cylinder Anchor Brass Anchor Fluid Power Anderson Brass Apollo Aro (Ingersoll-Rand) Arrow Hose (Eaton) Attica Hydraulic Auburn Gear Ausco Products BSF Inc. Band-It Barco Barksdale Black Bruin Brennan Industries Boston Industrial Hose (Eaton) Brand Hydraulics C.W. Mill Equipment Char-Lynn (Eaton) Cross Manufacturing Cylinders & Valves Daman Products David Brown Delsteel Delta Power Hydraulic Deltrol Fluid Products Dill Tire Service Products Dixon Valve & Coupling DMIC Doering Company Durst Power Transmission ENFM Eaton Corporation Enerpac Europower Felsted Flexfab Flo-Ezy Filters Flo-Tork Fulflo Specialties Funk Mfg. Generant Company Georgia Hyd. Cylinders Haldex Barnes Hannay Reels HDM Hydraulics Hedland Products Helland (Zero-Max) Hetronic USA Hub City Husco Hyco Hydra-Zorb Hydreco Hypac Hypro Ingersoll-Rand / ARO J.S. Barnes (Haldex) Kar-Tech Kawasaki Kinedyne Kocsis Technologies Kuriyama L & L Fittings Lantec Industries Lincoln Lube Linderme Copper Tubing Lion Lovejoy Lube Devices Magnaloy Coupling Marion Manufacturing Maurey Manufacturing Mazzer Industries Midway Manufacturing Mobil Oil Monarch Industries Muncie Power Products Oetiker Pacific Echo Parker / Republic Permco Pressure Devices Pullmaster Rawson-Koenig Winch Ray Snubbers Red Lion Reel Craft Industries SAI Hydraulics SLI (Control Enterprises) Snap Tite Spartan / Canfield Speciality Fittings America SPX SSP Fittings SSP Instrumentation Staffa (Kawasaki) Stauff Sun-Flow Synflex (Eaton) TR Engineering Telepneumatic (Parker) Terrell Gear Drives Thermal Transfer Tobul Accumulator Trident Marine Vector Engineering Vescor Vickers Voss Walterscheid (Eaton) Walvoil Ward Manufacturing Williams Controls Winzeler Brass World Wide Fittings Zeromax / Helland
Locations
FLORIDA BRANCH LOCATIONS
Belle Glade 326 S.E. 1st Street Belle Glade, FL 33430 Tel: 561-996-4431 Fax: 561-996-8531 Clearwater 10851 49th Street N. Clearwater, FL 33762 Tel: 727-561-0254 Fax: 727-572-1689 Daytona Beach 970 N. Clyde Morris Blvd. #132 Daytona Beach, FL 32177 Tel: 386-274-4617 Fax: 386-274-2759 Ft. Lauderdale 2601 S.W. 2nd Avenue Ft. Lauderdale, FL 33315 Tel: 954-463-6460 Fax: 954-463-3635 Ft. Myers 12900 Metro Parkway Ft. Myers, FL 33966 Tel: 239-274-9229 Fax: 239-274-0225 Homestead 51 S.E. 3rd Terrace Florida City, FL 33034 Tel: 305-248-3713 Fax: 305-248-3742 Jacksonville 30 South Lane Avenue Jacksonville, FL 32205 Tel: 904-783-4401 Fax: 904-781-9636 Lakeland 3222 Winter Lake Rd. Bay 9-10 Lakeland, FL 33803 Tel: 863-665-3589 Fax: 863-665-3758 Miami Springs 4301 N.W. 36th Street Miami Springs, FL 33166 Tel: 305-888-2415 Fax: 305-884-4066 Naples 4376 Corporate Square Blvd #2 & #3 Naples, FL 34104 Tel: 239-435-1642 Fax: 239-643-2985 Orlando 680 Montgomery Street Orlando, FL 32808 Tel: 407-295-4537 Fax: 407-291-9982 Pompano Beach TENNESSEE BRANCH LOCATIONS 2600 W. Sample Rd. Chattanooga Pompano Beach, FL 33073 Shallowford Business Park Tel: 954-973-5900 Fax: 954-973-4070 5959 Shallowford Rd. Suite 111 Tampa Chattanooga, TN 37421 7200 Dr. Martin Luther King Jr. Blvd Tel: 423-553-8854 Fax: 423-553-8995 Tampa, FL 33619 Tel: 813-621-0790 Fax: 813-628-0667 West Palm Beach 7680 Central Industrial Drive West Palm Beach, FL 33404 Tel: 561-863-6258 Fax: 561-863-6034
GEORGIA BRANCH LOCATIONS Atlanta (Forest Park) 937 Forest Parkway Forest Park, GA 30297 Tel: 404-608-0995 Fax: 404-608-1055 Atlanta (Mableton) 6310 Mableton Parkway Suite 100 Mableton, GA 30126 Tel: 678-398-6673 Fax: 678-398-6817 Atlanta (Marietta) 1200 Cobb Parkway N, Suite 500 Marietta, GA 30062 Tel: 678-290-9227 Fax: 678-290-9265 Augusta 2722 Mike Padgett Hwy, Lot A Augusta, GA 30906 Tel: 706-790-0628 Fax: 706-790-7043 Columbus 6440 W. Hamilton Park Drive, Suite J Columbus, GA 31904 Tel: 706-322-0707 Fax: 706-322-7430 Savannah 1370 US Hwy 80 Suites I & J Pooler, GA 31322 Tel: 912-965-6771 Fax: 912-965-9219

HSCCatalog Vickers1

Uploaded by

Copyright:

Available Formats

HSCCatalog Vickers1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HSCCatalog Vickers1

Uploaded by

Copyright:

Available Formats

Since 1947

HYDRAULIC SUPPLY COMPANY

Tel: (800) 507-9651

Fax: (954) 845-9113

Indexes & Technical Information

Pneumatic Power & Control

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Pneumatic Power & Control

Miscellaneous Products Indexes & Technical Information

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Complete Fluid Power Service

Indexes & Technical Information

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Fluid Conveying Miscellaneous Products

Indexes & Technical Information

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Pneumatic Power & Control

Indexes & Technical Information

Repair & Service

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Pneumatic Power & Control

Indexes & Technical Information

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Fluid Conveying Miscellaneous Products

Material is staged awaiting carrier pickup.

ALL ORDERS RECEIVED BY 4:00PM SHIP ON THAT SAME DAY

Indexes & Technical Information

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Central Distribution Center (continued)

Pneumatic Power & Control

HSC maintains an inventory of over $14 million.

Indexes & Technical Information

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Fluid Conveying Miscellaneous Products

continued on next page

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Indexes & Technical Information

Pneumatic Power & Control

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Hydraulic Power & Control

Pneumatic Power & Control

Vickers V10F Vane Pumps Page 88

Hydreco 1500K Series Gear Pumps Page 102

Vickers PVQ Piston Pumps Page 110

Permco DM400 Series Dump Pumps Page 120

Indexes & Technical Information

1999-2013 Hydraulic Supply Co. 1-800-507-9651 www.hydraulic-supply.com

Hydraulic Power & Control

Doering Series 241 Cartridge Hand Pumps Page 124

Vickers Foot Brackets (Cast Iron) Page 130

Char-Lynn 4000 Series Geroler Motors Page 141