Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
158 views

C Based Embedded System Design

This document provides an overview of the course "C BASED EMBEDDED SYSTEM DESIGN". The course is divided into two parts, the first dealing with 8051 architecture and interfacing with other devices. The second part covers basic embedded system design. Key topics include 8051 assembly language programming, addressing modes, input/output programming, real-time operating systems, and 8051 C programming. The course contents are divided into five modules which cover microcontroller overview, communication with the 8051, basics of 8051 C programming, data interfacing, and common control problems.

Uploaded by

abc75
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
158 views

C Based Embedded System Design

This document provides an overview of the course "C BASED EMBEDDED SYSTEM DESIGN". The course is divided into two parts, the first dealing with 8051 architecture and interfacing with other devices. The second part covers basic embedded system design. Key topics include 8051 assembly language programming, addressing modes, input/output programming, real-time operating systems, and 8051 C programming. The course contents are divided into five modules which cover microcontroller overview, communication with the 8051, basics of 8051 C programming, data interfacing, and common control problems.

Uploaded by

abc75
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

C BASED EMBEDDED SYSTEM DESIGN

Course Code: 03 Course Objective:


The syllabus is divided into two parts, the first one deals with 8051 architecture and its interfacing with other devices. Second part of the syllabus deals with the basic embedded system and its design. A microcontroller is an integrated circuit that is programmable. The syllabus makes student perfect in assembly language programming, addressing modes etc apart from it input-output programming is discussed in detail. In the second part Embedded systems and its application is discussed. Real Time Operating System is also explained at length.8051 C programming is also incorporated in the syllabus.

BTT 705

Credit Units:

Course Contents:
Module I: Introduction to an embedded systems design & RTOS Introduction to Embedded system, Processor in the System, Microcontroller, Memory Devices, Embedded System Project Management, ESD and Co-design issues in System development Process, Design cycle in the development phase for an embedded system, Use of target system or its emulator and In-circuit emulator, Use of software tools for development of an ES.Inter-process Communication and Synchronization of Processes, Tasks and Threads, Problem of Sharing Data by Multiple Tasks, Real Time Operating Systems: OS Services, I/O Subsystems, Interrupt Routines in RTOS Environment, RTOS Task Scheduling model, Interrupt Latency and Response times of the tasks. Module II: Overview of Microcontroller Microcontroller and Embedded Processors, Overview of 8051 Microcontroller family: Architecture, basic assembly language programming concepts, The program Counter and ROM Spaces in the 8051, Data types, 8051 Flag Bits ad PSW Register, 8051 Register Banks and Stack Instruction set, Loop and Jump Instructions, Call Instructions, Time delay generations and calculations, I/O port programming Addressing Modes, accessing memory using various addressing modes, Arithmetic instructions and programs, Logical instructions, BCD and ASCII application programs, Single-bit instruction programming, Reading input pins vs. port Latch, Programming of 8051 Timers, Counter Programming. Module III: Communication with 8051 Basics of Communication, Overview of RS-232, I2C Bus, UART, USB, IEEE 488 (GPIB). Parallel input output applications. (Stepper motor Sequencer program, Strobed input/output). Interrupt driven applications (real time clock, serial input/output with interrupt). Analog-digital interfacing (Pulse width modulator, 8-bit ADC). Module IV: Basics of 8051 C Programming Introduction to 8051 C, 8051 memory constitution, Constants, variables and data types. Arrays structures and unions, pointers, Loops and decisions, Functions, Modules and programs. Module V: 8051 C Programming Data interface, Timer control, Interrupt operations, Digital operations, A/D and D/A conversions, Common control problem examples (Centronics parallel interface, Printer interace, Memory access, Key matrix scanning, Stepper motor control and digital clock. ).

Examination Scheme:
Components A CT S/V/Q HA EE 5 10 8 7 70 Weightage (%) CT: Class Test, HA: Home Assignment, S/V/Q: Seminar/Viva/Quiz, EE: End Semester Examination; Att: Attendance

Text & References:


Text: Raj Kamal, 2004, Embedded Systems, TMH. James W. Stewart and Kai X. Miao, 2en Edition. The 8051 microcontroller Pearson Edu. Prentice Hall. M.A. Mazidi and J. G. Mazidi, 2004 The 8051 Microcontroller and Embedded Systems, PHI. References: David E. Simon,1999, An Embedded Software Primer, Pearson Education K.J. Ayala, 1991, The 8051 Microcontroller, Penram International. Dr. Rajiv Kapadia, 8051 Microcontroller & Embedded Systems, Jaico Press Dr. Prasad, 2004, Embedded Real Time System, Wiley Dreamtech.

You might also like