MCB Ranges of ABB

System pro M compact
Supplementary Protectors
Miniature MCCBs
AC1645
Table of Content
1 pro M compact
General information ............................................................................................1.1
S200 - Supplementary protectors ......................................................................1.7
S200U - Miniature MCCBs ................................................................................1.12
Accessories ........................................................................................................1.16
Technical data ....................................................................................................1.21
Approximate dimension ......................................................................................1.25
Cross-reference ..................................................................................................1.28
2 pro M Supplementary Protectors

General information ............................................................................................2.2
S280 (W) ..............................................................................................................2.4
S280UC ..............................................................................................................2.5
S290 ....................................................................................................................2.7
S220 ....................................................................................................................2.8
Accessories ........................................................................................................2.9
Technical data ....................................................................................................2.13
3 pro M S500 Supplementary Protectors

S500 ....................................................................................................................3.2
S500UC ..............................................................................................................3.4
Accessories ........................................................................................................3.6
Technical data ....................................................................................................3.7
4 pro M compact - Residual current devices

F200AC, F200A ..................................................................................................4.2
Approximate dimension & circuit diagrams........................................................4.3
5 pro M - Modular installation equipment

Switches ..............................................................................................................5.2
Disconnect switches ..........................................................................................5.3
Pilot devices ........................................................................................................5.4
Technical data ....................................................................................................5.5
Approximate dimensions ....................................................................................5.6
pro M compact
pro M compact
Miniature MCCBs
The new generation of miniature circuit breakers.

System pro M compact S200 series.
The new S200 series covers all your circuit breaker needs
up to 63 amps. We have redesigned our popular supplementary
protectors and have now introduced a brand new range of
miniature molded case circuit breakers suitable for use as
branch circuit protection according to UL 489/CSA C22.2 No.5.0.
Alongside the redesigned S200 supplementary protectors,
the new S200 U and S200 UP miniature MCCBs offer
the familiar ABB advantages; small size, excellent
protection and easy installation.
UL
S200 U and UP series are UL 489, CSA C22.2

No 5 approved as well as IEC 947.
For the first time one circuit breaker
fulfills North American and global approval
requirements. Global circuit breakers for
OEMs building global equipment.
By building on the proven technology
of our supplementary protectors and
introducing the new range of miniature
MCCBs, ABB now offer a full solution of the
highest quality that fits into the minimum
space. This allows you to better meet the
wishes of your customers by offering even
more compact global solutions.
The new S200 series is the first truly
compact and modular full circuit breaker
solution for use in both North American
and global markets.
ABB
1.1
AC 1645 11/07
General information
pro M compact
General information
Tripping characteristics
Miniature circuit breakers (MCBs) are used throughout the world in

all types of electrical installations. ABB MCBs are recognized by UL
and CSA as supplementary circuit protectors in systems rated 240VAC
and 480VAC.
MCBs are approved per IEC-898 and VDE 0641, and certified under
IEC-947 and VDE 0660 standards for use in systems rated 415VAC.
MCBs can be applied to 16 2/3Hz 400Hz and DC power systems.
Continuous current ratings are as low as 0.2 amperes and up to 63
amperes maximum.
MCBs are of compact size and can be quickly mounted on standard
35mm DIN rail or can be front mounted by use of a front mounting kit.
MCBs include line and load side terminals for conductors from 18
through 4AWG (0.75 25mm2).
MCBs can also be connected via busbar conductors which can be
either upper or lower mounted for top feed or bottom feed. Dual function terminals allow busbars to be connected with main incoming line
conductors without separate lugs.
Time-current curves
ABB miniature circuit breakers are available with different trip
characteristics, allowing for maximum system protection.
B characteristic
Available with the S200 series has rated currents of 6 through 63
amperes in 10 steps. The "B" time-current curve is designed primarily
for use in cable protection applications. Instantaneous tripping occurs
between approximately 3 to 5 times rated current in 50/60Hz systems.
This quick trip curve maximizes protection of control circuits under low
short circuit fault levels that could damage control wiring.
C characteristic
Available in the S200 series with rated currents up through 63
amperes. The "C" time-current curve is designed for medium magnetic
start-up currents. Instantaneous tripping occurs between 5 and 10
times rated current in 50/60 Hz systems. The C characteristic is also
available in other S2 series MCBs.
D characteristic
The new magnetic trip action has an instantaneous trip point of
approximately 15 times the breaker rating. Thus, the S200-D can
be a good protective solution for applications involving high in-rush
transformers, motors and other high inductive systems. The 200-D
is also suitable for any application where a high instantaneous trip
point is desired. Available in the S200 series.
K characteristic
The "K" time-current characteristic considers high magnetic start-up
currents from motors, transformers and other equipment.
Instantaneous tripping occurs between 8 and 12 times rated current in
50/60Hz systems. The "K" characteristic is available up through 63
amperes.
The "K" curve offers the best protection for the broadest range of electrical systems. The higher magnetic trip settings maximizes protection
while allowing for higher in-rush currents during system start-up.
Available in the S200, S200U and S200UP. series.
Z characteristic
Also available up through 63 amperes, the "Z" characteristic offers
instantaneous tripping between 2 and 3 times rated current in 50/60Hz
systems.
Many applications require a very low short circuit trip settings in order
to protect semiconductor or other sensitive devices and the "Z" trip
characteristic may provide maximum protection and service in these
applications. Available in S200, S200U and S200UP.
Accessories
Auxiliary devices can be added to S200 series MCBs:
Shunt trips
Auxiliary contacts
Trip contacts
Aux/trip contacts
Undervoltage release
Accessory device modules can be field mounted to all above listed
ABB MCBs.
Applications
MCBs can be used for equipment protection, in commercial appliances, protection of control circuits against overcurrent faults, computer equipment and other computer peripheral devices.
UL 489 / CSA C22.2 NO 5.0

S200U and S200UP MCBs are listed as molded case circuit breakers
for use as branch circuit devices. MCCBs and accessories are listed
under UL file E212323 and CSA file LR98793 certificate 1546332.
UL 1077 / CSA C22.2 NO 235

S200 and S200P MCBs are recognized as supplementary protectors
and are intended for use as overcurrent protection within an appliance
or other electrical equipment where branch circuit overcurrent protection is already provided or not required. MCBs and accessories are
recognized under UL File E76126 and CSA file LR98793 certificates
1530107 and 1546299.
1.2
AC1645 11/07
ABB
pro M compact
General information
Interrupting ratings
Trip characteristics overview
Rated interrupting
capacity
Rated
current
120 VAC
10kA
6 - 63A
0.5 - 63A
240 VAC
10kA
6
0.5
6
0.5
277 VAC
MCB
type
Comment
Curve
Magnetic
characteristic 1
Thermal
characteristic
S200-B
S200-C, D, K, Z
Single pole
Single pole
63A
63A
63A
63A
S200-B
S200-C, D, K, Z
S200-B
S200-C, D, K, Z
Single pole
Single pole
Multi pole
Multi pole
B
C
D
K
Z
3 - 5X
5 - 10X
10 - 20X
8 - 12X
2 - 3X
1.25X
1.25X
1.25X
1.05X
1.05X
6kA
6 - 63A
0.5 - 63A
S200-B
S200-C, D, K, Z
Single pole
Single pole
480Y/277 VAC
6kA
6 - 63A
0.5 - 63A
S200-B
S200-C, D, K, Z
Multi pole
Multi pole
60 VDC
10kA
6 - 63A
0.5 - 63A
S200-B
S200-C, D, K, Z
Single pole
Single pole
125 VDC
10kA
6 - 63A
0.5 - 63A
S200-B
S200-C, D, K, Z
Multi pole
Multi pole
Voltage
Series
S200
S200
S200
S200
S200
1 All values are relative to MCB's ampere rating.
Miniature Molded Case Circuit Breakers

Rated interrupting
capacity
Rated
current
MCB
type
Comment
120 VAC
10kA
0.2 - 63A
0.2 - 25A
S200U-K, Z
S200UP-K, Z
Single pole
Single pole
240 VAC
10kA
0.2
0.2
0.2
0.2
63A
63A
25A
25A
S200U-K, Z
S200U-K, Z
S200UP-K, Z
S200UP-K, Z
Single pole
Multi pole
Single pole
Multi pole
277 VAC
10kA
0.2 - 25A
S200UP-K, Z
Single pole
480Y/277 VAC
10kA
0.2 - 25A
S200UP-K, Z
Multi pole
Voltage
ABB
1.3
AC 1645 11/07
General information
Tripping curves
pro M compact
1.4
AC1645 11/07
ABB
pro M compact
General information
Tripping curves
Miniature MCCBs
S200U
S200UP
ABB
1.5
AC 1645 11/07
General information
Construction details
pro M compact
Electro-magnetic protection
Thermal protection-bimetal
Upper terminal
Tripping lever
Operating
mechanism
Operator
Space for
identification
marker
Arc chamber
Fixed contact
Moving contact
DIN rail holder
Lower terminal
1.6
AC1645 11/07
ABB
S200
480Y/277VAC
UL 1077
CSA C22.2 NO 235
IEC-898/947-2
Cable protection
S201-B16
S202-B16
Rated
current
Catalog
number
1 pole
6
10
13
16
20
25
32
40
50
63
S201-B6
S201-B10
S201-B13
S201-B16
S201-B20
S201-B25
S201-B32
S201-B40
S201-B50
S201-B63
1 pole + neutral
6
S201-B6NA
10
S201-B10NA
13
S201-B13NA
16
S201-B16NA
20
S201-B20NA
25
S201-B25NA
32
S201-B32NA
40
S201-B40NA
50
S201-B50NA
63
S201-B63NA
2 pole
6
10
13
16
20
25
32
40
50
63
S202-B6
S202-B10
S202-B13
S202-B16
S202-B20
S202-B25
S202-B32
S202-B40
S202-B50
S202-B63
List
price
Delivery
class
Sugg.
order
qty
10
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.375
0.250
3 pole + neutral
6
S203-B6NA
10
S203-B10NA
13
S203-B13NA
16
S203-B16NA
20
S203-B20NA
25
S203-B25NA
32
S203-B32NA
40
S203-B40NA
50
S203-B50NA
63
S203-B63NA
0.500
0.250
4 pole
6
10
13
16
20
25
32
40
50
63
0.510
Wgt. kg
(1 pc.)
Rated
current
Catalog
number
0.125
3 pole
6
10
13
16
20
25
32
40
50
63
S203-B6
S203-B10
S203-B13
S203-B16
S203-B20
S203-B25
S203-B32
S203-B40
S203-B50
S203-B63
S204-B6
S204-B10
S204-B13
S204-B16
S204-B20
S204-B25
S204-B32
S204-B40
S204-B50
S204-B63
List
price
S203-B16
Delivery Class
A - Standard item, stock to 2 weeks lead time
B - Stock to 4 weeks lead time
C - 6 to 8 week lead time
S204-B16
ABB
Discount schedule DS-S2
1.7
AC 1645 11/07
pro M compact
S200
B
S200
480Y/277VAC
S200
C
pro M compact
UL 1077
CSA C22.2 - NO 235
IEC-898/947-2
Cable & equipment protection
S201-C16
S202-C16
S203-C16
Rated
current
Catalog
number
1 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S201-C0.5
S201-C1
S201-C1.6
S201-C2
S201-C3
S201-C4
S201-C6
S201-C8
S201-C10
S201-C13
S201-C16
S201-C20
S201-C25
S201-C32
S201-C40
S201-C50
S201-C63
1 pole + neutral
0.5
S201-C0.5NA
1
S201-C1NA
1.6
S201-C1.6NA
2
S201-C2NA
3
S201-C3NA
4
S201-C4NA
6
S201-C6NA
8
S201-C8NA
10
S201-C10NA
13
S201-C13NA
16
S201-C16NA
20
S201-C20NA
25
S201-C25NA
32
S201-C32NA
40
S201-C40NA
50
S201-C50NA
63
S201-C63NA
2 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S202-C0.5
S202-C1
S202-C1.6
S202-C2
S202-C3
S202-C4
S202-C6
S202-C8
S202-C10
S202-C13
S202-C16
S202-C20
S202-C25
S202-C32
S202-C40
S202-C50
S202-C63
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.125
0.250
0.250
Rated
current
Catalog
number
3 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S203-C0.5
S203-C1
S203-C1.6
S203-C2
S203-C3
S203-C4
S203-C6
S203-C8
S203-C10
S203-C13
S203-C16
S203-C20
S203-C25
S203-C32
S203-C40
S203-C50
S203-C63
3 pole + neutral
0.5
S203-C0.5NA
1
S203-C1NA
1.6
S203-C1.6NA
2
S203-C2NA
3
S203-C3NA
4
S203-C4NA
6
S203-C6NA
8
S203-C8NA
10
S203-C10NA
13
S203-C13NA
16
S203-C16NA
20
S203-C20NA
25
S203-C25NA
32
S203-C32NA
40
S203-C40NA
50
S203-C50NA
63
S203-C63NA
4 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S204-C0.5
S204-C1
S204-C1.6
S204-C2
S204-C3
S204-C4
S204-C6
S204-C8
S204-C10
S204-C13
S204-C16
S204-C20
S204-C25
S204-C32
S204-C40
S204-C50
S204-C63
List
price
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.375
0.500
0.500
Delivery Class
1.8
AC1645 11/07
Discount schedule DS-S2C
ABB
S200
480Y/277VAC
UL 1077
CSA C22.2 - NO 235
IEC-898/947-2
S201-D16
S202-D16
S203-D16
Rated
current
Catalog
number
1 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S201-D0.5
S201-D1
S201-D1.6
S201-D2
S201-D3
S201-D4
S201-D6
S201-D8
S201-D10
S201-D13
S201-D16
S201-D20
S201-D25
S201-D32
S201-D40
S201-D50
S201-D63
1 pole + neutral
0.5
S201-D0.5NA
1
S201-D1NA
1.6
S201-D1.6NA
2
S201-D2NA
3
S201-D3NA
4
S201-D4NA
6
S201-D6NA
8
S201-D8NA
10
S201-D10NA
13
S201-D13NA
16
S201-D16NA
20
S201-D20NA
25
S201-D25NA
32
S201-D32NA
40
S201-D40NA
50
S201-D50NA
63
S201-D63NA
2 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S202-D0.5
S202-D1
S202-D1.6
S202-D2
S202-D3
S202-D4
S202-D6
S202-D8
S202-D10
S202-D13
S202-D16
S202-D20
S202-D25
S202-D32
S202-D40
S202-D50
S202-D63
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.125
0.250
0.250
Rated
current
Catalog
number
3 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S203-D0.5
S203-D1
S203-D1.6
S203-D2
S203-D3
S203-D4
S203-D6
S203-D8
S203-D10
S203-D13
S203-D16
S203-D20
S203-D25
S203-D32
S203-D40
S203-D50
S203-D63
3 pole + neutral
0.5
S203-D0.5NA
1
S203-D1NA
1.6
S203-D1.6NA
2
S203-D2NA
3
S203-D3NA
4
S203-D4NA
6
S203-D6NA
8
S203-D8NA
10
S203-D10NA
13
S203-D13NA
16
S203-D16NA
20
S203-D20NA
25
S203-D25NA
32
S203-D32NA
40
S203-D40NA
50
S203-D50NA
63
S203-D63NA
4 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S204-D0.5
S204-D1
S204-D1.6
S204-D2
S204-D3
S204-D4
S204-D6
S204-D8
S204-D10
S204-D13
S204-D16
S204-D20
S204-D25
S204-D32
S204-D40
S204-D50
S204-D63
List
price
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.375
0.500
0.500
Delivery Class
ABB
1.9
AC 1645 11/07
pro M compact
S200
D
S200
480Y/277VAC
S200
K
pro M compact
UL 1077
CSA C22.2 - NO 235
IEC-947-2
S201-K15
S202-K15
S203-K15
Rated
current
Catalog
number
1 pole
0.5
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
30
32
40
50
60
63
S201-K0.5
S201-K1
S201-K1.6
S201-K2
S201-K3
S201-K4
S201-K5
S201-K6
S201-K8
S201-K10
S201-K13
S201-K15
S201-K16
S201-K20
S201-K25
S201-K30
S201-K32
S201-K40
S201-K50
S201-K60
S201-K63
1 pole + neutral
0.5
S201-K0.5NA
1
S201-K1NA
1.6
S201-K1.6NA
2
S201-K2NA
3
S201-K3NA
4
S201-K4NA
6
S201-K6NA
8
S201-K8NA
10
S201-K10NA
13
S201-K13NA
16
S201-K16NA
20
S201-K20NA
25
S201-K25NA
32
S201-K32NA
40
S201-K40NA
50
S201-K50NA
63
S201-K63NA
2 pole
0.5
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
30
32
40
50
60
63
S202-K0.5
S202-K1
S202-K1.6
S202-K2
S202-K3
S202-K4
S202-K5
S202-K6
S202-K8
S202-K10
S202-K13
S202-K15
S202-K16
S202-K20
S202-K25
S202-K30
S202-K32
S202-K40
S202-K50
S202-K60
S202-K63
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.125
0.250
0.250
Rated
current
Catalog
number
3 pole
0.5
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
30
32
40
50
60
63
S203-K0.5
S203-K1
S203-K1.6
S203-K2
S203-K3
S203-K4
S203-K5
S203-K6
S203-K8
S203-K10
S203-K13
S203-K15
S203-K16
S203-K20
S203-K25
S203-K30
S203-K32
S203-K40
S203-K50
S203-K60
S203-K63
3 pole + neutral
0.5
S203-K0.5NA
1
S203-K1NA
1.6
S203-K1.6NA
2
S203-K2NA
3
S203-K3NA
4
S203-K4NA
6
S203-K6NA
8
S203-K8NA
10
S203-K10NA
13
S203-K13NA
16
S203-K16NA
20
S203-K20NA
25
S203-K25NA
32
S203-K32NA
40
S203-K40NA
50
S203-K50NA
63
S203-K63NA
4 pole
0.5
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S204-K0.5
S204-K1
S204-K1.6
S204-K2
S204-K3
S204-K4
S204-K6
S204-K8
S204-K10
S204-K13
S204-K16
S204-K20
S204-K25
S204-K32
S204-K40
S204-K50
S204-K63
List
price
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.375
0.500
0.500
Delivery Class
1.10
AC1645 11/07
ABB
S200
480Y/277VAC
UL 1077
CSA C22.2 - NO 235
IEC-947-2
Fast trip characteristics
S201-Z16
S202-Z16
S203-Z16
Rated
current
Catalog
number
1 pole
0.5
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S201-Z0.5
S201-Z1
S201-Z1.6
S201-Z2
S201-Z3
S201-Z4
S201-Z6
S201-Z8
S201-Z10
S201-Z16
S201-Z20
S201-Z25
S201-Z32
S201-Z40
S201-Z50
S201-Z63
1 pole + neutral
0.5
S201-Z0.5NA
1
S201-Z1NA
1.6
S201-Z1.6NA
2
S201-Z2NA
3
S201-Z3NA
4
S201-Z4NA
6
S201-Z6NA
8
S201-Z8NA
10
S201-Z10NA
16
S201-Z16NA
20
S201-Z20NA
25
S201-Z25NA
32
S201-Z32NA
40
S201-Z40NA
50
S201-Z50NA
63
S201-Z63NA
2 pole
0.5
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S202-Z0.5
S202-Z1
S202-Z1.6
S202-Z2
S202-Z3
S202-Z4
S202-Z6
S202-Z8
S202-Z10
S202-Z16
S202-Z20
S202-Z25
S202-Z32
S202-Z40
S202-Z50
S202-Z63
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.125
0.250
0.250
Rated
current
Catalog
number
3 pole
0.5
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S203-Z0.5
S203-Z1
S203-Z1.6
S203-Z2
S203-Z3
S203-Z4
S203-Z6
S203-Z8
S203-Z10
S203-Z16
S203-Z20
S203-Z25
S203-Z32
S203-Z40
S203-Z50
S203-Z63
3 pole + neutral
0.5
S203-Z0.5NA
1
S203-Z1NA
1.6
S203-Z1.6NA
2
S203-Z2NA
3
S203-Z3NA
4
S203-Z4NA
6
S203-Z6NA
8
S203-Z8NA
10
S203-Z10NA
16
S203-Z16NA
20
S203-Z20NA
25
S203-Z25NA
32
S203-Z32NA
40
S203-Z40NA
50
S203-Z50NA
63
S203-Z63NA
4 pole
0.5
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S204-Z0.5
S204-Z1
S204-Z1.6
S204-Z2
S204-Z3
S204-Z4
S204-Z6
S204-Z8
S204-Z10
S204-Z16
S204-Z20
S204-Z25
S204-Z32
S204-Z40
S204-Z50
S204-Z63
List
price
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.375
0.500
0.500
Delivery Class
ABB
1.11
AC 1645 11/07
pro M compact
S200
Z
S200U
240VAC
Miniature MCCBs
S200U
K
pro M compact
UL 489
CSA C22.2 - NO 5.0
IEC 947-2
S201U-K15
S202U-K15
S203U-K15
Rated
current
Catalog
number
1 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
30
32
40
50
60
63
S201U-K0.2
S201U-K0.3
S201U-K0.5
S201U-K0.75
S201U-K1
S201U-K1.6
S201U-K2
S201U-K3
S201U-K4
S201U-K5
S201U-K6
S201U-K8
S201U-K10
S201U-K13
S201U-K15
S201U-K16
S201U-K20
S201U-K25
S201U-K30
S201U-K32
S201U-K40
S201U-K50
S201U-K60
S201U-K63
2 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
30
32
40
50
60
63
S202U-K0.2
S202U-K0.3
S202U-K0.5
S202U-K0.75
S202U-K1
S202U-K1.6
S202U-K2
S202U-K3
S202U-K4
S202U-K5
S202U-K6
S202U-K8
S202U-K10
S202U-K13
S202U-K15
S202U-K16
S202U-K20
S202U-K25
S202U-K30
S202U-K32
S202U-K40
S202U-K50
S202U-K60
S202U-K63
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg.
(1 pc.)
Rated
current
Catalog
number
0.140
3 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
30
32
40
50
60
63
S203U-K0.2
S203U-K0.3
S203U-K0.5
S203U-K0.75
S203U-K1
S203U-K1.6
S203U-K2
S203U-K3
S203U-K4
S203U-K5
S203U-K6
S203U-K8
S203U-K10
S203U-K13
S203U-K15
S203U-K16
S203U-K20
S203U-K25
S203U-K30
S203U-K32
S203U-K40
S203U-K50
S203U-K60
S203U-K63
4 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
30
32
40
50
60
63
S204U-K0.2
S204U-K0.3
S204U-K0.5
S204U-K0.75
S204U-K1
S204U-K1.6
S204U-K2
S204U-K3
S204U-K4
S204U-K5
S204U-K6
S204U-K8
S204U-K10
S204U-K13
S204U-K15
S204U-K16
S204U-K20
S204U-K25
S204U-K30
S204U-K32
S204U-K40
S204U-K50
S204U-K60
S204U-K63
0.280
List
price
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.420
0.560
Delivery Class
1.12
AC1645 11/07
Discount schedule DS-SU
ABB
S200U
240VAC
Miniature MCCBs
UL 489
CSA C22.2 NO 5.0
IEC 947-2
Rated
current
S201U-Z15
S202U-Z15
S203U-Z15
Catalog
number
1 pole
0.5
1
1.6
2
3
4
5
6
8
10
15
16
20
25
30
32
40
50
60
63
S201U-Z0.5
S201U-Z1
S201U-Z1.6
S201U-Z2
S201U-Z3
S201U-Z4
S201U-Z5
S201U-Z6
S201U-Z8
S201U-Z10
S201U-Z15
S201U-Z16
S201U-Z20
S201U-Z25
S201U-Z30
S201U-Z32
S201U-Z40
S201U-Z50
S201U-Z60
S201U-Z63
2 pole
0.5
1
1.6
2
3
4
5
6
8
10
15
16
20
25
30
32
40
50
60
63
S202U-Z0.5
S202U-Z1
S202U-Z1.6
S202U-Z2
S202U-Z3
S202U-Z4
S202U-Z5
S202U-Z6
S202U-Z8
S202U-Z10
S202U-Z15
S202U-Z16
S202U-Z20
S202U-Z25
S202U-Z30
S202U-Z32
S202U-Z40
S202U-Z50
S202U-Z60
S202U-Z63
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
Rated
current
Catalog
number
0.140
3 pole
0.5
1
1.6
2
3
4
5
6
8
10
15
16
20
25
30
32
40
50
60
63
S203U-Z0.5
S203U-Z1
S203U-Z1.6
S203U-Z2
S203U-Z3
S203U-Z4
S203U-Z5
S203U-Z6
S203U-Z8
S203U-Z10
S203U-Z15
S203U-Z16
S203U-Z20
S203U-Z25
S203U-Z30
S203U-Z32
S203U-Z40
S203U-Z50
S203U-Z60
S203U-Z63
0.280
4 pole
0.5
1
1.6
2
3
4
5
6
8
10
15
16
20
25
30
32
40
50
60
63
S204U-Z0.5
S204U-Z1
S204U-Z1.6
S204U-Z2
S204U-Z3
S204U-Z4
S204U-Z5
S204U-Z6
S204U-Z8
S204U-Z10
S204U-Z15
S204U-Z16
S204U-Z20
S204U-Z25
S204U-Z30
S204U-Z32
S204U-Z40
S204U-Z50
S204U-Z60
S204U-Z63
List
price
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.420
0.500
Delivery Class
ABB
1.13
AC 1645 11/07
pro M compact
S200U
Z
S200UP
480Y/277VAC
Miniature MCCBs
S200UP
K
pro M compact
UL 489
CSA C22.2 - NO 5.0
IEC 947-2
Rated
current
S201UP-K15
S202UP-K15
S203UP-K15
Part
number
1 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
S201UP-K0.2
S201UP-K0.3
S201UP-K0.5
S201UP-K0.75
S201UP-K1
S201UP-K1.6
S201UP-K2
S201UP-K3
S201UP-K4
S201UP-K5
S201UP-K6
S201UP-K8
S201UP-K10
S201UP-K13
S201UP-K15
S201UP-K16
S201UP-K20
S201UP-K25
2 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
S202UP-K0.2
S202UP-K0.3
S202UP-K0.5
S202UP-K0.75
S202UP-K1
S202UP-K1.6
S202UP-K2
S202UP-K3
S202UP-K4
S202UP-K5
S202UP-K6
S202UP-K8
S202UP-K10
S202UP-K13
S202UP-K15
S202UP-K16
S202UP-K20
S202UP-K25
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
Rated
current
Part
number
0.140
3 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
S203UP-K0.2
S203UP-K0.3
S203UP-K0.5
S203UP-K0.75
S203UP-K1
S203UP-K1.6
S203UP-K2
S203UP-K3
S203UP-K4
S203UP-K5
S203UP-K6
S203UP-K8
S203UP-K10
S203UP-K13
S203UP-K15
S203UP-K16
S203UP-K20
S203UP-K25
0.280
4 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
S204UP-K0.2
S204UP-K0.3
S204UP-K0.5
S204UP-K0.75
S204UP-K1
S204UP-K1.6
S204UP-K2
S204UP-K3
S204UP-K4
S204UP-K5
S204UP-K6
S204UP-K8
S204UP-K10
S204UP-K13
S204UP-K15
S204UP-K16
S204UP-K20
S204UP-K25
List
price
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.420
0.560
Delivery Class
1.14
AC1645 11/07
ABB
S200UP
480Y/277VAC
Miniature MCCBs
UL 489
CSA C22.2 - NO 5.0
IEC 947-22
S201UP-Z15
S202UP-Z15
Rated
current
Part
number
1 pole
0.5
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
S201UP-Z0.5
S201UP-Z1
S201UP-Z1.6
S201UP-Z2
S201UP-Z3
S201UP-Z4
S201UP-Z5
S201UP-Z6
S201UP-Z8
S201UP-Z10
S201UP-Z13
S201UP-Z15
S201UP-Z16
S201UP-Z20
S201UP-Z25
2 pole
0.5
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
S202UP-Z0.5
S202UP-Z1
S202UP-Z1.6
S202UP-Z2
S202UP-Z3
S202UP-Z4
S202UP-Z5
S202UP-Z6
S202UP-Z8
S202UP-Z10
S202UP-Z13
S202UP-Z15
S202UP-Z16
S202UP-Z20
S202UP-Z25
List
price
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.140
0.280
Sugg.
order
qty
Wgt. kg
(1 pc.)
S203UP-Z0.5
S203UP-Z1
S203UP-Z1.6
S203UP-Z2
S203UP-Z3
S203UP-Z4
S203UP-Z5
S203UP-Z6
S203UP-Z8
S203UP-Z10
S203UP-Z13
S203UP-Z15
S203UP-Z16
S203UP-Z20
S203UP-Z25
0.420
S204UP-Z0.5
S204UP-Z1
S204UP-Z1.6
S204UP-Z2
S204UP-Z3
S204UP-Z4
S204UP-Z5
S204UP-Z6
S204UP-Z8
S204UP-Z10
S204UP-Z13
S204UP-Z15
S204UP-Z16
S204UP-Z20
S204UP-Z25
0.560
Part
number
3 pole
0.5
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
4 pole
0.5
1
1.6
2
3
4
5
6
8
10
13
15
16
20
25
List
price
Delivery Class
S204UP-Z15
ABB
Delivery
class
Rated
current
1.15
AC 1645 11/07
pro M compact
S200UP
Z
Accessories
Busbars (UL and IEC approved only)
S200, S200U and S200UP
pro M compact
1 Phase
For use
on:
S200
S200U &
S200UP
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
63
80
60
60
1053
1053
PS-END0
PS-END0
80
6
12
18
103
206
310
PS1/6/16BP
PS1/12/16BP
PS1/18/16BP
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
Catalog
number
63
80
58
58
1019
1019
PS-END
PS-END
PS2/58SP
PS2/58/16SP
80
6
12
18
103
206
310
PS2/6/16BP
PS2/12/16BP
PS2/18/16BP
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
Catalog
number
63
80
60
60
1055
1055
PS-END
PS-END
PS3/60SP
PS3/60/16SP
80
6
12
18
103
206
310
PS3/6/16BP
PS3/12/16BP
PS3/18/16BP
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
Catalog
number
80
60
1056
PS-END1
PS4/60/16SP
L1
Catalog
number
List
price
PS1/60
PS1/60/16
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.260
0.410
0.040
0.082
0.122
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.312
0.510
0.051
0.105
0.159
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.340
0.567
0.057
0.114
0.170
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.624
L1....
2 Phase
For use
on:
S200
L1
S200U &
S200UP
L2
List
price
L1 L2 L1 L2....
3 Phase
For use
on:
S200
S200U &
S200UP
L1
L2
List
price
L3
L1 L2 L3 L1 L2 L3....
4 Phase
For use
on:
S200
L1
L2
L3
List
price
Delivery Class
L4

L1 L2 L3 L4 L1 L2 L3 L4....
NOTE
ALL BUSBARS MAY BE CENTER FED IN ORDER
TO DOUBLE THE AMPACITY RATING
(TERMINAL LIMITS: S200=1104, S200U/UP=140A)
NOTE
BUSBARS MAY BE USED ON LINE OR LOAD
OF MCBS
1.16
AC1645 11/07
Discount schedule DS-S2A
ABB
For use
on:
S200
For use
on:
S200
For use
on:
S200
For use
on:
S200
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
Catalog
number
63
80
38
38
1053
1053
PS-END0
PS-END0
PS1/38H
PS1/38/16H
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
Catalog
number
80
48
1046
PS-END
PS2/48/16SP
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
Catalog
number
80
48
1020
PS-END
PS3/48/16SP
Amp
rating
Number
of
poles
Busbar
length
End cap
catalog
number
Catalog
number
80
52
1019
PS-END1
PS4/52/16SP
List
price
List
price
List
price
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.210
0.286
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.661
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.641
Delivery
class
Suggested
order qty.
quantity
Weight
kg
(1 pc.)
0.873
Delivery Class
NOTE
ALL BUSBARS MAY BE CENTER FED IN ORDER
TO DOUBLE THE AMPACITY RATING
(TERMINAL LIMITS: S200=1104, S200U/UP=140A)
NOTE
BUSBARS MAY BE USED ON LINE OR LOAD
OF MCBS
ABB
1.17
AC 1645 11/07
pro M compact
Accessories
S200
Accessories
pro M compact
Description
Busbar end caps
Catalog
number
1 phase
2 & 3 phase
4 phase
Busbar tooth covers (5 pcs)

(shrouds unused portion of busbar)
Busbar mounted terminal block,
1 pole, for use on all busbars,
wire size: 14 AWG to 2 AWG
List
price
Delivery
class
Suggested
order qty
Weight kg
qty (1 pc.)
PS-END0
PS-END
PS-END1
10
0.001
SZ-BSK
10
0.024
SZ-ESK2
(IEC only)
0.003
Delivery
class
Suggested
order qty
Weight kg
qty (1 pc.)
SZ-BSK
Cross section
AWG / mm2
For use on:
Catalog
number
List
price
1/0 (50mm2) Straight

1/0 (50mm2) 90O
S200
SZ-AST55I
SZ-AST50I
10
10
0.014
0.014
1/0 (50mm2) Straight

1/0 (50mm2) 90O
S200U &
S200UP
SZ-AST55U
SZ-AST50U
10
10
0.014
0.014
Ring tongue
S200U &
S200UP
SZ-AST55UP
10
SZ-ESK2
SZ-AST55I
Delivery Class
SZ-AST50I
1.18
AC1645 11/07
ABB
Electrical
accessories
For use
on:
Catalog
number
List
price
Delivery
class
Sugg.
order qty
Wgt. kg
(1 pc.)
0.04
15
0.02
0.04
Auxiliary contacts
For field mounting right side:
1 form C contact
For field mounting below:
1 N.O.
1 N.C.
S200
S200U &
S200UP
S2C-H6R
S2C-H6RU
S200
S200
S2C-H10
S2C-H01
The auxiliary contacts will signal whether the breaker is in the ON or OFF position. Wire size: 18 AWG to 14 AWG.
S2C-H6R
Bell alarm or auxiliary contacts (universal)

1 form C contact
S200
S200U &
S200UP
S2C-S/H6R
S2C-S6RU
The bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically the contacts would be connected to an alarm or
bell to signal the operator that an overcurrent trip has occured. The bell alarm also includes a test button for testing the alarm contacts without opening the breaker. Wire size: 18 AWG to 16 AWG.
Shunt Trip
A1-12-60VAC (12-60VDC)
A2-110-415VAC (110-250VDC)
S200
S200U &
S200UP
S2C-H10
S2C-A1
S2C-A2
S2C-A1U
S2C-A2U
0.150
For remote tripping of breaker, a shunt trip device can be added to the MCB. The solenoid device opens the breaker after control voltage is applied,
Shunt trips are available for on control system voltage (12-415VAC-VDC).
S2C-A1
For field mounting:

12VDC
24VAC
24VDC
48VAC
48VDC
110VAC
110VDC
230VAC
230VDC
400VAC
S200
S2C-UA12DC
S2C-UA24AC
S2C-UA24DC
S2C-UA48AC
S2C-UA48DC
S2C-UA110AC
S2C-UA110DC
S2C-UA230AC
S2C-UA230DC
S2C-UA400AC
0.09
When control voltage drops below approximately 50% of rated voltage, the UVR opens the breaker. The breaker can not be operated unless proper
control voltage is first applied to the UVR coil. Similar in size and mounting to the shunt trip accessory.
Factory mounting
All accessories can be easily mounted in the field. For factory mounting of any accessory devices, add $50 list to total price per
breaker. To create complete catalog number, take suffix of accessory device following S2C- and add suffix to end of breaker
part number. Multiple suffixesmust be added in alphabetical order.
Example:
S202-K20A1
S202-K20A2H6R
$ 240
$ 268
(2 pole, 20A breaker with type A1 shunt trip) S202-K20 @ $82 + S2C-A1
(2 pole, 20A breaker eith type A2 shunt trip and H6R aux. contacts)
S202-K20 @ $82 + S2C-A1 @ $108 + S2C-H6R @ $28 + factory mounting @ $50 = $260
Auxiliary contacts and shunt trips may be mounted in combination.
Auxiliary contacts
S2C-UA12DC
Rating
Rated current:
Min. voltage:
Mechanical life:
10A
24VAC/VDC
10,000 operations
Delivery Class
S2C-H6RU
ABB
1.19
AC 1645 11/07
pro M compact
Accessories
Accessories
S200
pro M compact
Electrical
accessories
Catalog
number
List
price
Delivery
class
Suggested
order quantities
Wgt. kg
(1 pc.)
Front mounting kit

For 2 poles
For 2 5 poles
For 2 10 poles
S500-ME1
S500-ME2
S500-ME3
0.060
0.082
0.102
MB-CL
0.057
MB-2PD
MB-3PD
0.071
SA1
SA2
10
BS
BS/40
12644
12646
12650
12652
0.230
0.307
0.581
1.162
BP-1P
S2C-DH
0.261
Includes flange, mounting rail and hardware.

S500-ME2
Front mounting clip

For 1 4 poles
Simple mounting clip for up to four module mounting.
Front mounting bracket

For 1 2 poles
For 1 3 poles
For flush mounting of three pole MCBs: includes hardware.
MB-CL
Locking device
Adaptor only
Padlock only w/ 2 keys
Allows breaker to be locked in ON or OFF position.
Labeling accessory
1 sheet = 40 blank labels
1 sheet = 40 numbered labels
Enclosure, IP55 (IEC only)

MB-3PD
For 4 modules
For 6 modules
For 10 modules
For 20 modules
Molded plastic complete with mounting rail and knock-outs for cable entries.
Blanking plates
Single pole (set of 10)
SA1
Rotary mechanism
For use with 2, 3 and 4 pole S2 MCBs and disconnect switch selector handles with 5mm shaft.
Delivery Class
SA2
S2C-DH
1.20
AC1645 11/07
ABB
Item
Approvals:
UL
CSA
IEC/EN
No. of poles:
S200 - B
S200 - C, D
S200 - K
S200 - Z
1077
C22.2 No. 235
60898, 60947-2
1077
C22.2 No. 235
60898, 60947-2
1077
C22.2 No. 235
60947-2
1077
C22.2 No. 235
60947-2
1, 2, 3, 4, 1+N, 3+N
1, 2, 3, 4, 1+N, 3+N
1, 2, 3, 4, 1+N, 3+N
1, 2, 3, 4, 1+N, 3+N
C, D
6 to 63A
0.5 to 63A
0.5 to 63A
0.5 to 63A
Tripping characteristic:
Rated currents:
Minimum operating voltage:
12V
UL/CSA rated voltage &

interrupting capacity
12V
12V
12V
Single pole
Multi pole
Single pole
Multi pole
Single pole
Multi pole
Single pole
120VAC
10kA
10kA
10kA
6kA
240VAC
6kA
10kA
6kA
10kA
6kA
10kA
6kA
6kA
277VAC
6kA
6kA
6kA
6kA
6kA
6kA
6kA
6kA
60VDC
10kA
10kA
10kA
10kA
10kA
10kA
10kA
10kA
125VDC
10kA
10kA
10kA
10kA
10kA
480Y / 277VAC
Frequency:
Rated voltage
IEC single pole
IEC multi-pole
Protection category:
Depth of unit per DIN 43880:
pro M compact
Technical data
S200
50/60Hz (see below)
Multi pole
50/60Hz (see below)
50/60 Hz (see below)
50/60Hz (see below)
230VAC
60VDC
400VAC
125VDC
230VAC
60VDC
400VAC
125VDC
230VAC
60VDC
400VAC
125VDC
230VAC
60VDC
400VAC
125VDC
IP20
IP20
IP20
IP20
68mm
68mm
68mm
68mm
Mounting position:
optional
optional
optional
optional
Standard mounting:
35mm DIN rail
35mm DIN rail
35mm DIN rail
35mm DIN-rail
Main & shunt trip terminals:

Wire size
Torque
Accessory terminals
Tool
0.75 25mm2
2.8Nm
0.75 2.5mm2
#1 Posidrive
0.75 25mm2
2.8Nm
0.75 2.5mm2
#1 Posidrive
0.75 25mm2
2.8Nm
0.75 2.5mm2
#1 Posidrive
0.75 25mm2
2.8Nm
0.75 2.5mm2
#1 Posidrive
In<32A, 20,000 operations

In>32A, 10,000 operations



-25C to +55C
-40C to +70C
-25C to +55C
-40C to +70C
-25C to +55C
-40C to +70C
-25C to +55C
-40C to +70C
Shock resistance:
30g minimum of 2 impacts,

shock duration of 13ms



Vibration resistance:
5g, 20 cycles, 5 Hz, 150 Hz

@ 0.8 - In

@ 0.8 - In

@ 0.8 - In

@ 0.8 - In
No
No
No
No
Service life at rated load:
Ambient temperatures:
Storage temperatures:
Trip indication
Influence of frequency on electro-magnetic trips

Magnetic trip values shown on trip curves are validfor 50/60Hz applications. For frequencies other
than 50/60Hz, the magnetic (instaneous) trip values are increase by th e factor given below.
Approx. factor
16-2/3 to 60Hz
1
100Hz
1.1
200Hz
1.2
400Hz
1.5
DC
1.5
Thermanl trippingis independent of frequency.
ABB
1.21
AC 1645 11/07
Technical data
S200U, S200UP
pro M compact
Item
Approvals:
UL
CSA
IEC/EN
S200U
S200UP
489
C22.2 No. 5.0
60947-2
489
C22.2 No. 5.0
60947-2
1, 2 ,3 ,4
1, 2, 3, 4
K, Z
K, Z
0.2 to 63A
0.2 to 25A
12V
12V
No. of poles:
Tripping characteristic:
Rated currents:
Minimum operating voltage:
UL/CSA rated voltage &
interrupting capacity
120VAC
Single pole
Multi pole
Single pole
Multi pole
10kA
240VAC
10kA
10kA
277VAC
10kA
480Y/ 277VAC
Frequency:
Rated voltage
IEC single pole
IEC multi-pole
Protection category:
Depth of unit per DIN 43880:
10kA
50/60Hz
50/60Hz
230VAC
60VDC
400VAC
125VDC
230VAC
60VDC
400VAC
125VDC
IP20
IP20
68mm
68mm
Mounting position:
optional
optional
Standard mounting:
35mm DIN rail
35mm DIN rail
Main terminals:
Wire size
Torque
0.75 25mm2
(18 - 4 AWG)
2.8Nm
0.75 25mm2
(18 - 4 AWG)
2.8Nm
20,000 operations
20,000 operations
Service life at rated load:

Ambient temperatures:
-25C to +55C
-25C to +55C
Shock resistance:


Vibration resistance:

@ 0.8 - In

@ 0.8 - In
Yes
Yes
Trip indicator
1.22
AC1645 11/07
ABB
pro M compact
Technical data
Terminal marking and accessories mounting
Terminal data
Input optional from top or bottom
S201
S202
S203
S204
S201 Na
S203 Na
Automatic
opening
Manual
opening
S2C-S/H6R
Automatic
opening
Manual
opening
11 1
11 1
11 1
95 1
95 1
95 1
12 14 2
12 14 2
12 14 2
96 98 2
96 98 2
96 98 2
S2C-H6R
S2C-H11L
S2C-H20L
S2C-H02L
13 21 1
13 23 1
11 21 1
14 22 2
14 24 2
12 22 2
S2C-H10
13
S2C-H01
11
14
12
Possible mounting arrangements of MCB accessories
ABB
1.23
AC 1645 11/07
Technical data
Busbars & connectors
Connection methods
pro M compact
Dual function terminals provided in open position for connection to busbars or cable.
Terminals allow for connection

of cable 18-4 AWG.
Two slots per terminal offer the

ability to connect, independently, two conductors.
Top and bottom terminals can

be bussed together with single
phase or multi-phase busbars
as shown. Both line and load
side terminals can be busbar
connected.
Easy removal of devices from

an assembly when using busbar
in the bottom, load side
terminals. Supplementary
protectors only.
Conductors can only be inserted

into open terminals, preventing
mis-wiring and potential problems.
1.24
AC1645 11/07
ABB
pro M compact
Approximate dimension
S200, S200U, S200UP
S200
mm
S200U
mm
69
52.5
70
44
88
35
45
17.5
6.8
17.5
22
S200UP
mm
69
52.5
70
49
100
35
45
17.5
6.8
17.5
22
ABB
1.25
AC 1645 11/07
Accessories S200
pro M compact
mm
S2C-A/UA
S2C-S/H6R
mm
S2C-H10
S2C-H01
MB-CL
MB-3PD
1.26
AC1645 11/07
mm
ABB
pro M compact
Accessories S200
S2C-DH
mm
12644
12650
12646
12652
ABB
1.27
AC 1645 11/07
Cross-reference
pro M compact
Older
version
Suggested
replacement
series
Physical
comparison
S260B
S260C
S260D
S270K
S280K
S280Z
S200B
S200C
S200D
S200K
S200K
S200Z
Same pole spacing

Same pole spacing
Same pole spacing
Same pole spacing
Same pole spacing
Same pole spacing
Electrical
comparison
Same trip characteristic

Same trip characteristic except 6kA IC
Same trip characteristic except 6kA IC
Many older styles of ABB miniature circuit breakers have been replaced by new and improved versions. Many of these newer styles can
be directly interchanged, both electrically and physically, with the older version. There are also many international styles of ABB circuit
breakers which are not normal stock items and may be interchanged with stocked ABB versions.
1.28
AC1645 11/07
ABB
pro M
pro M
S280, S220, S290
ABB
Description
Features
The S2 series of miniature circuit breakers

offer a compact solution to protection
requirements. The breakers are recognized
under standard UL 1077 and CSA C22.2
NO 235 as supplemental devices. The S2
devices are current limiting, DIN rail mounted and can offer a good equivalent to fused
systems.
The S2 is available with application-specific
trip characteristics to provide maximum
circuit protection. The breakers offer
thermal-magnetic trip protection according
to K and Z characteristics.
For the worldwide market, the breakers carry
UL, CSA, IEC, CE and many other agency
approvals and certifications.
Current limiting
Fast breaking time (2.5 3.5 msec)
Unique bus connection system
Wide range of accessories
Available with variable depth handle
mechanism
Optional Z curve for SCR protection
CE certified and marked
DIN rail or front plated mounting
Finger safe terminals
Multi-function terminals
Suitable for reverse feed
UL 1077 and CSA C22.2 NO 235
480Y/277VAC, 600Y/347VAC
and 500VDC versions
2.1
AC1645 11/07
General information
Trip characteristics overview & tripping curves
Rated interrupting
capacity
Rated
current
MCB
type
Comment
Curve
Magnetic
characteristic 1
Thermal
characteristic
Series
18kA
32 - 63A
26 - 45A
S500-B,C,D
S500-K
Single pole
30kA
6 - 25A
0.15 - 25A
S500-B,C,D
S500-K
B
C
D
K
Z
3 - 5X
5 - 10X
10 - 20X
8 - 12X
2 - 3X
1.25X
1.25X
1.25X
1.05X
1.05X
S500
S290, S500
S500
S280, S500
S280
18kA
32 - 63A
26 - 45A
30kA
6 - 25A
0.15 - 25A
277VAC
6kA
10kA
50 - 63A
0.2 - 40A
S280-K,Z
S280-K,Z
Single pole
Single pole
480Y/277VAC
6kA
10kA
40 - 63A
0.2 - 32A
S280-K,Z
S280-K,Z
Multi pole
Multi pole
347VAC
600Y/347VAC
3kA
3kA
0.2 - 63A
0.2 - 63A
S220-K
S220-K
Single pole
Multi pole
125VDC
10kA
0.2 - 63A
S280UC-K,Z
Single pole
250VDC
4.5kA
0.2 - 63A
S280UC-K,Z
Single pole
500VDC
4.5kA
0.2 - 63A
S280UC-K,Z
Multi pole
Voltage
120VAC
240VAC
S500-B,D
S500-K
1 All values are relative to MCB's ampere rating.
S500-B,C,D
S500-K
5000
5000
5000
1000
500
1000
500
1000
500
100
50
100
50
100
50
10
5
10
5
10
5
1
0.5
1
0.5
1
0.5
0.1
AC
0.1
0.05
DC
DC
0.01
10
multiple of rated current
0.1
0.05
DC
0.01
AC1645 11/07
seconds
10,000
seconds
10,000
0.05
2.2
UC-Z
UC-K
10,000
seconds
pro M
Tripping curves
20 30
0.01
1
10
20 30
10
20 30
ABB
General information
Construction details (S280 shown)
Electro-magnetic protection
Thermal protection-bimetal
Upper terminal
Tripping lever
pro M
Operating
mechanism
Operator
Trip indicator
Space for
identification
marker
Arc chamber
Fixed contact
Moving contact
DIN rail holder
Lower terminal
ABB
2.3
AC1645 11/07
S280 (W) - for use with ring tongue terminal connectors

480Y/277VAC
S280(W)
K
UL 1077
CSA C22.2 - NO 235
S281-K16W
pro M
S282-K1W
S283-K63W
Rated
current
Catalog
number
List
price
1 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S281-K0.2W
S281-K0.3W
S281-K0.5W
S281-K0.75W
S281-K1W
S281-K1.6W
S281-K2W
S281-K3W
S281-K4W
S281-K6W
S281-K8W
S281-K10W
S281-K13W
S281-K16W
S281-K20W
S281-K25W
S281-K32W
S281-K40W
S281-K50W
S281-K63W
$ 52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
54
56
62
68
76
2 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S282-K0.2W
S282-K0.3W
S282-K0.5W
S282-K0.75W
S282-K1W
S282-K1.6W
S282-K2W
S282-K3W
S282-K4W
S282-K6W
S282-K8W
S282-K10W
S282-K13W
S282-K16W
S282-K20W
S282-K25W
S282-K32W
S282-K40W
S282-K50W
S282-K63W
$ 123
123
123
123
123
123
123
123
123
123
123
123
123
123
123
125
129
142
156
176
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.125
Rated
current
Catalog
number
List
price
3 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
13
16
20
25
32
40
50
63
S283-K0.2W
S283-K0.3W
S283-K0.5W
S283-K0.75W
S283-K1W
S283-K1.6W
S283-K2W
S283-K3W
S283-K4W
S283-K6W
S283-K8W
S283-K10W
S283-K13W
S283-K16W
S283-K20W
S283-K25W
S283-K32W
S283-K40W
S283-K50W
S283-K63W
$ 186
186
186
186
186
186
186
186
186
186
186
186
186
186
186
190
193
206
237
270
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.375
Delivery Class
0.250
Screws (must be ordered separately)

Catalog
number
Item
PKG of 20 screws
S2-SCR
List
price 2
No
charge
For use with ring tongue or cable terminals only. Cannot be used with busbar system.
2 No charge when ordered with the S280(W).
2.4
AC1645 11/07
Discount schedule DS-CB
ABB
S280UC
500 VDC - 480Y/277VAC
S280UC
Rated
current
S281UC-K25
S282UC-K8
S283UC-K16
Catalog
number
List
price
Delivery
class
1 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S281UC-K0.2
S281UC-K0.3
S281UC-K0.5
S281UC-K0.75
S281UC-K1
S281UC-K1.6
S281UC-K2
S281UC-K3
S281UC-K4
S281UC-K6
S281UC-K8
S281UC-K10
S281UC-K16
S281UC-K20
S281UC-K25
S281UC-K32
S281UC-K40
S281UC-K50
S281UC-K63
$ 100
100
100
100
100
100
100
100
100
100
100
100
100
100
105
106
112
131
146
2 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S282UC-K0.2
S282UC-K0.3
S282UC-K0.5
S282UC-K0.75
S282UC-K1
S282UC-K1.6
S282UC-K2
S282UC-K3
S282UC-K4
S282UC-K6
S282UC-K8
S282UC-K10
S282UC-K16
S282UC-K20
S282UC-K25
S282UC-K32
S282UC-K40
S282UC-K50
S282UC-K63
$ 232
232
232
232
232
232
232
232
232
232
232
232
232
232
239
246
256
300
336
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.125
Rated
current
3 pole
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
Catalog
number
List
price
S283UC-K0.2
S283UC-K0.3
S283UC-K0.5
S283UC-K0.75
S283UC-K1
S283UC-K1.6
S283UC-K2
S283UC-K3
S283UC-K4
S283UC-K6
S283UC-K8
S283UC-K10
S283UC-K16
S283UC-K20
S283UC-K25
S283UC-K32
S283UC-K40
S283UC-K50
S283UC-K63
$ 342
342
342
342
342
342
342
342
342
342
342
342
342
342
354
362
378
451
492
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.375
Delivery Class
C
0.250
Direct current applications

The S280UC differs from standard miniature circuit breakers in that the UC versions include a permanent
magnet which aids in the extinguishing of the arc during medium and high level faults. It is necessary to
observe the correct polarity and current direction when connecting the UC breakers. Two examples of
correct connection are shown below.
Maximum voltage between leads
UC-K
250VDC
500VDC
10,000
5000
Single Pole
S281UC
1000
500
L-
Two Pole
S282UC
L+
100
50
L+
-1
-1
3+
+2
+2
4-
10
5
seconds
L-
1
0.5
LOAD
+
0.1
0.05
DC
LOAD
+
0.01
1
10
ABB
20 30
Termination points are marked on all UC type MCBs, points one (1) and four (4) are negative and points two (2)
and three (3) are positive. Four pole breakers are also available for voltage reversal applications.
2.5
AC1645 11/07
pro M
UL 1077
CSA 22.2
NO 235
Cable and Equipment Protection
S280UC
500VDC - 480Y/277VAC
S280 (UC) Z
UL 1077
CSA 22.2
NO 235
Fast trip characteristic
500 VDC Class

Rated
current
S281UC-Z16
pro M
S282UC-Z32
S283UC-Z32
UC-Z
Catalog
number
List
price
1 pole
0.5
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S281UC-Z0.5
S281UC-Z1
S281UC-Z1.6
S281UC-Z2
S281UC-Z3
S281UC-Z4
S281UC-Z6
S281UC-Z8
S281UC-Z10
S281UC-Z16
S281UC-Z20
S281UC-Z25
S281UC-Z32
S281UC-Z40
S281UC-Z50
S281UC-Z63
$ 162
162
162
162
162
162
162
162
162
162
162
163
169
182
208
233
2 pole
0.5
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S282UC-Z0.5
S282UC-Z1
S282UC-Z1.6
S282UC-Z2
S282UC-Z3
S282UC-Z4
S282UC-Z6
S282UC-Z8
S282UC-Z10
S282UC-Z16
S282UC-Z20
S282UC-Z25
S282UC-Z32
S282UC-Z40
S282UC-Z50
S282UC-Z63
$ 376
376
376
376
376
376
376
376
376
376
376
383
394
410
479
537
3 pole
0.5
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
S283UC-Z0.5
S283UC-Z1
S283UC-Z1.6
S283UC-Z2
S283UC-Z3
S283UC-Z4
S283UC-Z6
S283UC-Z8
S283UC-Z10
S283UC-Z16
S283UC-Z20
S283UC-Z25
S283UC-Z32
S283UC-Z40
S283UC-Z50
S283UC-Z63
$ 548
548
548
548
548
548
548
548
548
548
548
556
573
592
697
780
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
10
0.125
0.250
0.375
Delivery Class
10,000
5000

1000
500
100
50
seconds
10
5
1
0.5
0.1
0.05
DC
0.01
1
10
20 30
2.6
AC1645 11/07
ABB
S290
400/230VAC
IEC 898
Cable and equipment protection
400VAC Class
S291-C80
List
price
Delivery
class
Sugg.
order
qty
S291-C80
S291-C100
S291-C125
$ 230
246
329
9.2
2 pole
80
100
125
S292-C80
S292-C100
S292-C125
$ 600
638
998
18.4
3 pole
80
100
125
S293-C80
S293-C100
S293-C125
$ 940
968
1288
27.6
4 pole
80
100
125
S294-C80
S294-C100
S294-C125
$ 1233
1297
1700
36.8
$ 57
1.75
$ 88
1.75
$ 116
6.2
6.2
Rated
current
Catalog
number
1 pole
80
100
125
Wgt. oz.
(1 pc.)
pro M
S290
Auxiliary contact
S290-H11
S290-H11
Bell alarm
S290-S
Shunt trip
S290-A1
For field mounting, left side, 110V 415VAC
S290-A2
$ 116
For field mounting, left side, 24 48VDC
Delivery Class
ABB
2.7
AC1645 11/07
S220
600Y/347VAC
S220
K
UL 1077
CSA C22.2 - NO 235
Rated
current
pro M
S221-K10
1 pol e
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
Catalog
number
List
price
S221-K0.2
S221-K0.3
S221-K0.5
S221-K0.75
S221-K1
S221-K1.6
S221-K2
S221-K3
S221-K4
S221-K6
S221-K8
S221-K10
S221-K16
S221-K20
S221-K25
S221-K32
S221-K40
S221-K50
S221-K63
$ 66
66
66
66
66
66
66
66
66
66
66
66
66
66
70
74
87
99
110
S222-K0.2
S222-K0.3
S222-K0.5
S222-K0.75
S222-K1
S222-K1.6
S222-K2
S222-K3
S222-K4
S222-K6
S222-K8
S222-K10
S222-K16
S222-K20
S222-K25
S222-K32
S222-K40
S222-K50
S222-K63
$ 144
144
144
144
144
144
144
144
144
144
144
144
144
144
153
160
183
207
233
Delivery
class
Sugg.
order
qty
10
Wgt. kg
(1 pc.)
0.180
Rated
current
3 pol e
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
Catalog
number
S223-K0.2
S223-K0.3
S223-K0.5
S223-K0.75
S223-K1
S223-K1.6
S223-K2
S223-K3
S223-K4
S223-K6
S223-K8
S223-K10
S223-K16
S223-K20
S223-K25
S223-K32
S223-K40
S223-K50
S223-K63
List
price
$ 226
226
226
226
226
226
226
226
226
226
226
226
226
226
241
256
289
328
367
Delivery
class
Sugg.
order
qty
Wgt. kg
(1 pc.)
0.540
2 pole
S222-K10
0.2
0.3
0.5
0.75
1
1.6
2
3
4
6
8
10
16
20
25
32
40
50
63
Delivery Class
0.360
Auxiliary Contacts 1NO / 1NC

For field mounting. Can be modified to 2 NO or 2NC
S223-K20
2.8
AC1645 11/07
S220-H11
$ 40
10
0.05
ABB
Accessories
Busbars & connectors (UL and IEC approved only)
S220, S280
1 Phase
Amp
rating
55
55
85
110
L1
Number
of
poles
12
56
56
56
Busbar
length
207
988
988
988
End cap
catalog
number
Catalog
number
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
SZ-KS1/12
SZ-KS1/56
SZ-KS2/56
SZ-VB45.32
$ 10
28
36
53
10
5
5
5
0.6
2.6
5.2
10.0
Uninsulated copper bar mounts flush with bottom edge of circuit breakers.
For use on bottom and lower sides of S280 and S220.
L1....
2 Phase
50
65
50
L1
Number
of
poles
58
58
12
Busbar
length
1035
1035
213
End cap
catalog
number
Catalog
number
PSB-END3 SZ-PSB54N
PSB-END3 SZ-PSB56N
PSB-53UL
List
price
$ 96
96
32
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
pro M
Amp
rating
14.4
19.1
4.0
Insulated busbar assembly contains 2 separate circuits for use with 1, 1+N or 2 pole MCBs.
L2
L1 L2 L1 L2....
3 Phase
Amp
rating
50
65
50
L1
L2
L3
Number
of
poles
12
60
60
Busbar
length
213
1065
1065
End cap
catalog
number
Catalog
number
PSB-3UL
PSB-END6 SZ-PSB4N
PSB-END6 SZ-PSB12N
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
$ 32
101
138
3
1
1
4.3
21.4
34.2
Insulated busbar assembly contains 3 separate circuits for use with 1 or 3 pole MCBs.
L1 L2 L3 L1 L2 L3....
4 Phase
Amp
rating
50
65
L1
L2
Number
of
poles
60
60
Busbar
length
1035
1035
End cap
catalog
number
Catalog
number
PSB-END4 SZ-PSB62N
PSB-END4 SZ-PSB64N
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
$ 161
186
23.2
31.6
Insulated busbar assembly contains 4 separate circuits for use with 3+N1 or 4 pole MCBs.
L3
L4
Delivery Class
L1 L2 L3 L4 L1 L2 L3 L4....

ABB
Discount schedule DS-CBA
2.9
AC1645 11/07
Accessories
S220, S280
1 Phase with 1 auxiliary
L1
L1
L1
Amp
rating
Number
of
poles
Busbar
length
50
65
39
39
1044
1044
End cap
catalog
number
Catalog
number
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
SZ-KS3/39N
SZ-KS4/39N
$ 39
44
B
B
1
1
7.4
10.1
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
$ 97
124
B
B
1
1
16.1
22.1
Insulated copper bar mounts flush with bottom edge of circuit breakers.
L1....
3 Phase for 1 pole MCB's with 1 auxillary
pro M
L1
L1
L2
L2
Amp
rating
Number
of
poles
Busbar
length
50
65
58
58
1044
1044
End cap
catalog
number
Catalog
number
PSB-END3 SZ-PSB46N
PSB-END3 SZ-PSB48N
Insulated busbar assembly contains 2 separate circuits for use with 1, 1+N or 2 pole MCBs.
L3
L3....
2 Phase with 1 auxillary

Amp
rating
65
L1
L1 L2
L1 L2
Number
of
poles
48
Busbar
length
1065
End cap
catalog
number
Catalog
number
PSB-END3 SZ-PSB92N
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
$ 136
23.2
Insulated busbar assembly contains 3 separate circuits for use with 1 or 3 pole MCBs.
L2
L1 L2....
3 Phase with 1 auxillary

Amp
rating
50
65
L1
L1 L2 L3
L2
L3
Number
of
poles
48
48
Busbar
length
980
980
End cap
catalog
number
Catalog
number
PSB-END3 SZ-PSB50N
PSB-END3 SZ-PSB52N
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
$ 97
124
B
B
1
1
15.8
22.6
Insulated busbar assembly contains 4 separate circuits for use with 3+N1 or 4 pole MCBs.
Delivery Class
L1 L2 L3....

2.10
AC1645 11/07
ABB
Accessories
S220, S280
3 Phase + N, for use with 2 pole MCB's
on 3 phase / 4W system
Amp
rating
50
65
Number
of
poles
58
58
Busbar
length
1048
1048
End cap
catalog
number
Catalog
number
PSB-END4 SZ-PSB58N
PSB-END4 SZ-PSB60N
List
price
Delivery
class
Suggested
order qty.
quantity
Weight
ounce
(2 pc.)
$ 155
186
B
B
1
1
22.3
30.8
L1
L2
L3
Catalog
number
Description
L1 N
L2 N
L3 N
L1 N
L2....
Busbar end caps
PSB-END3
PSB-END4
PSB-END5
PSB-END6
List
price
$2
Delivery
class
Suggested
order qty.
Weight
ounce
qty. (2 pc.)
10
pro M
Insulated busbar assembly contains 4 separate circuits for use with 1+N or 2 pole MCBs.
Delivery Class
ABB
2.11
AC1645 11/07
Accessories
S280
Electrical
accessories
Catalog
number
List
price
Delivery
class
Suggested
order quantities
Wgt. oz.
(1 pc.)
Auxiliary contacts
S2-H11
For field mounting: left side

1 N.O./ 1 N.C.
2 N.O.
2 N.C.
1 N.O./ 2 N.C.
2 N.O./ 1 N.C.
2 N.O./ 1 N.C. (low voltage)
S2-H11
S2-H20
S2-H02
S2-H12
S2-H21
S2-H21KL
$ 28
28
28
40
40
45
1.4
The S2-H11 auxiliary switch can be field S280 series breaker. The auxiliary contacts will signal whether the breaker is in the ON or OFF position.
The contacts are rated 6A/240 VAC and 1.5A/110 VDC. Minimum operating voltage is 12 VAC/VDC.
Bell alarm
pro M
For field mounting, left side
S2-S
$ 36
1.4
The S2-S bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically the contacts would be connected to an
alarm or bell to signal the operator that an overcurrent trip has occured. The bell alarm also includes a test button for testing the alarm contacts
without opening the breaker. The contact is rated 6A/240 VAC and 1.5A/110 VDC. Minimum operating voltage is 12 VAC/VDC.
Bell alarm with auxiliary contact

S2-A1
S2-S/H
$ 45
1.4
The S2-S/H bell alarm with auxiliary contact device combines one set of bell alarm contacts with one set of auxiliary contacts (N.O.).
Shunt trip
12-60 VAC (12-60VDC)
110-415 VAC (110-250 VDC)
S2-A1
S2-A2
$ 108
5.2
For remote tripping of breaker, a shunt trip device can be added to the MCB. The solenoid device opens the breaker after control voltage is applied.
Shunt trips are available depending on control system voltage (12-415 VAC/VDC).
S2-S
For field mounting, left or right side

12V
24V
48V
110V
220V
380V
S2-UA12
S2-UA24
S2-UA48
S2-UA110
S2-UA220
S2-UA380
$ 170
5.2
When control voltage drops below approximately 50% of rated voltage, the S2-UA opens the breaker. The breaker can not be operated unless proper control voltage is first applied to the UVR coil. Similar in size and mounting to the shunt trip accessory; can be left or right side mounted.
Hand operated neutral disconnect

For field mounting, right side, 40A max.
S2-S/H
S2-NT
$ 22
1.4
When switching of neutral with breaker contacts is desired, the neutral module S2-UA can be added to S280 MCB. The neutral connection makes
before the MCB contacts connect line to load. Makes contact before MCB contacts close. Must be opened manually.
Factory mounting
All accessories can be easily mounted in the field. For factory mounting of any accessory devices, add $50 list
to total price per breaker. To create complete catalog number, take suffix of accessory device following S2-
and add suffix to end of breaker part number. Multiple suffixes must be added in alphabetical order.
Example:
S282UC-K20
$ 390
S282UC-K20A2H11 $ 418
S2-NT
(2 pole, 20A breaker with type A1 shunt trip)

S282UC-K20 @ $232 + S2-A1 @ $108 + factory mounting @ $50
(2 pole, 20A breaker with type A2 shunt trip and H11 aux. contacts)
S282UC-K20 @ $232 + S2-A1 @ $108 + S2-H11 @ $28 + factory mounting @ $50
Auxiliary contacts and shunt trips may be mounted in combination.
Delivery Class
NOTE: Above accesssories are for use with S280 Supplementary Protectors only.
2.12
AC1645 11/07
ABB
pro M
Technical data
Mounting and operating instructions
ABB
2.13
AC1645 11/07
Technical data
Busbars & connectors
Connection methods
pro M
2.14
AC1645 11/07
ABB
S280
pro M
Technicaldata
data
Technical
S280UC,S280
S280
S280UC,
ABB
2.15
AC1645 11/07
S290
S220
data
Technical data
S220
S290, S220
pro M
2.16
AC1645 11/07
ABB
pro M
ABB
2.17
AC1645 11/07
pro M
2.18
AC1645 11/07
ABB
S500
S500
ABB
3.1
AC1645 11/07
S500
S500
600Y/347VAC
1 pole
1 pole
2 pole
2 pole
3 pole
3 pole
S500
3.2
AC1645 11/07
ABB
600Y/347VAC
S500
IEC 898
IEC 947-2
1 pole
1 pole
2 pole
3 pole
S500
2 pole
3 pole
ABB
3.3
AC1645 11/07
S500
600Y/347VAC - 600VDC
1 pole
3 pole
2 pole
4 pole
S500
3.4
AC1645 11/07
ABB
S500
600Y/347VAC - 600VDC
3 pole
2 pole
4 pole
S500
1 pole
ABB
3.5
AC1645 11/07
S500
3.6
AC1645 11/07
ABB
S500
Technical data
S500
ABB
3.7
AC1645 11/07
S500
3.8
AC1645 11/07
ABB

Residual current devices
F200 series
2 Pole
4 Pole
Description
ABB
The F200 series is cURus recognized according to UL 1053 and to CSA C22.2 no.144.
The F202 is for use in single phase/two wire or
two wire systems. The F204 is for use in three
phase/four wire systems.
The F200 series RCDs replaces the F360
series with no change in form, fit or function.
The F200 have a profile similar to the S2
MCBs and can be used with the MCB busbars.
pro M compact RCCB
RCDs provide ground fault equipment

protection by monitoring the leakage of
current to ground. The F200 series will trip
when ground faults are detected in excess of
the GF trip rating of the device. These devices
provide GF protection only and are used in
series with standard MCBs which provide
overload and short circuit protection. The
F200 series can be used as a main device
providing GF protection for several MCB
branch devices.
4.1
AC1645 11/07
Residual current devices

F200AC, F200A
F200
AC type - for alternating current only

Breaker
F202AC
GF trip
level
Two pole
480VAC
F204
Four pole
480VAC
Catalog
number
List
price
10mA
30mA
16
25
40
63
F202AC-16/0.01
F202AC-25/0.03
F202AC-40/0.03
F202AC-63/0.03
100mA
25
40
63
F202AC-25/0.1
F202AC-40/0.1
F202AC-63/0.1
350
395
565
300mA
25
40
63
F202AC-25/0.3
F202AC-40/0.3
F202AC-63/0.3
245
275
405
500mA
25
40
63
F202AC-25/0.5
F202AC-40/0.5
F202AC-63/0.5
395
545
365
30mA
25
40
63
F204AC-25/0.03
F204AC-40/0.03
F204AC-63/0.03
100mA
25
40
63
F204AC-25/0.1
F204AC-40/0.1
F204AC-63/0.1
350
415
615
300mA
25
40
63
F204AC-25/0.3
F204AC-40/0.3
F204AC-63/0.3
260
290
420
500mA
25
40
63
F204AC-25/0.5
F204AC-40/0.5
F204AC-63/0.5
260
290
420
F202
F204AC
Rated
current
Suggested
order qty
Wgt. kg
(1 Pc.)
0.225
0.375
Delivery
class
Suggested
order qty
Wgt. kg
(1 Pc.)
0.225
0.375
$ 505
350
395
665
$ 275
415
615
A type - for alternating current and/or current with DC components

Breaker
F202A
pro M compact RCCB
Delivery
class
F204A
GF trip
level
Two pole
480VAC
Four pole
480VAC
Rated
current
Catalog
number
List
price
10mA
30mA
16
25
40
63
F202A-16/0.01
F202A-25/0.03
F202A-40/0.03
F202A-63/0.03
$ 590
410
466
660
100mA
25
40
63
F202A-25/0.1
F202A-40/0.1
F202A-63/0.1
410
465
660
300mA
25
40
63
F202A-25/0.3
F202A-40/0.3
F202A-63/0.3
285
320
475
500mA
25
40
63
F202A-25/0.5
F202A-40/0.5
F202A-63/0.5
460
640
425
30mA
25
40
63
F204A-25/0.03
F204A-40/0.03
F204A-63/0.03
100mA
25
40
63
F204A-25/0.1
F204A-40/0.1
F204A-63/0.1
425
485
725
300mA
25
40
63
F204A-25/0.3
F204A-40/0.3
F204A-63/0.3
305
340
495
500mA
25
40
63
F204A-25/0.5
F204A-40/0.5
F204A-63/0.5
305
340
495
$ 320
485
725
Delivery Class
4.2
AC1645 11/07
ABB
Approximate dimensions & circuit diagrams

Residual current devices, F200
Approximate dimensions
2.76
70
2.91
1.38
74
35
1.96
50.2
3.54
1.77
90
45
Circuit diagrams
4 pole
pro M compact RCCB
2 pole
1 For use on 3p/3w systems, add jumper between 4 and 8N for operation of test button.
ABB
4.3
AC1645 11/07
NOTES
pro M compact RCCB

4.4
AC1645 11/07
ABB

Modular installation equipment
Description
Safe connection by box terminals
DIN rail mounted with 45mm front opening
Captive screws with Pozidrive slotted head,

Pozidrive system, Gr. 1
For use in auxiliary and logic devices
Snap-on labels available
Provide additional user functions for system

control and operation
Quick mounting with snap-on clip, easily

accessible and detachable at the bottom
Include pushbuttons, indicating lights and

selector switches
Protection against unintentional direct touch
ABB System pro M compatibility
System approach for control and circuit

protection
Most devices are UL 508 and CSA C22.2

NO 14 recognized and are IEC compliant
Compact size that dimensionally matches

the S2 MCB series
Labeled with the CE Mark
pro M MDRC
Control and pilot functions can be along

side protective devices
ABB
5.1
AC1645 11/07

Switches, 240VAC
16 & 25A
Pilot
devices
Type
Rated
current
Catalog
number
List
price
Delivery
schedule
Minimum
order quantity
Weight (Oz.)
1 piece
Switches
E221-10
1 N.O. + 1 N.C.
2 N.O. + 2 N.C.
3 N.O. + 1 N.C.
16
16
16
E221-11
E221-22
E221-31
$ 60
118
118
10
2.46
1 N.O.
2 N.O.
3 N.O.
4 N.O.
16
16
16
16
E221-10
E221-20
E221-30
E221-40
$ 39
73
80
106
10
1.94
2.12
2.29
2.47
1 N.O. + 1 N.C.
1 N.O.
2 N.O.
3 N.O.
4 N.O.
25
25
25
25
25
E222-11
E222-10
E222-20
E222-30
E222-40
$ 93
71
94
106
159
10
2.47
1.94
2.12
2.29
2.47
1 Change-over contact
2 Change-over contacts
16
16
E221-6
E221-6/2
$ 46
83
10
2.12
2.47
1 Change-over contact
25
E222-6
$ 85
10
2.12
Form C switches
Form C switches (I-O-II, Hand-OFF-Automatic)

1 Pole
2 Pole
16
16
E221-4
E221-4/2
$ 66
98
10
2.12
2.47
1 Pole
25
E222-4
$ 100
10
2.12
Note: Above devices are UL 508 recognized CSA C22.2 N 14 approved and IEC certified.
A300 pilot duty
Delivery Class
pro M MDRC
5.2
AC1645 11/07
ABB

Disconnect switches
45, 63, 80 & 100A
Type
Rated
current
Single pole, 240V
Two pole, 415V
E201/125r
Three pole, 415V
Four pole, 415V
Catalog
number
Disc.
Sws.
List
price
45
63
80
100
125
E201/45r
E201/63r
E201/80r
E201/100r
E201/125r
$ 36
40
48
64
69
45
63
80
100
125
E202/45r
E202/63r
E202/80r
E202/100r
E202/125r
$ 76
84
100
136
146
45
63
80
100
125
E203/45r
E203/63r
E203/80r
E203/100r
E203/125r
$ 116
128
152
204
218
45
63
80
100
125
E204/45r
E204/63r
E204/80r
E204/100r
E204/125r
$ 156
172
204
272
282
Delivery
schedule
Suggested
order qtys
Weight (Oz.)
1 piece
10
2.82
6.17
9.52
12.87
Above devices are IEC certified.
Delivery Class
Isolator switches
The E201 series operate as disconnect switches
and are typically used as a main disconnect for
several branch MCB devices. The isolator switches
offer no overcurrent protection. The E201 series is
the same physical size and shape as the S260,
S270 & S280 series. The switches include dual
function terminals and can be connected via
standard ABB busbar through the upper or lower
terminals.

pro M MDRC
E203/45r
ABB
5.3
AC1645 11/07

Pilot devices
Pilot
devices
Type
Catalog
number
List
price
Delivery
schedule
Pack
units pcs.
Weight (Oz.)
1 piece
Pushbutton, 1 N.O. + 1 N.C. contact

Grey
Red
Green
Yellow
Black
Blue
E225-11B
E225-11C
E225-11D
E225-11E
E225-11F
E225-11G
$ 50
10
1.94
$ 67
10
1.94
E229-B/110
E229-C/110
E229-D/110
E229-E/110
E229-G/110
$ 62
10
1.59
E10/24
E10/110
E10/230
$ 16
0.14
Illuminated pushbutton, 1 N.O. contact with lamp, 120 VAC

E225-11F
Clear
Red
Green
Yellow
Blue
E227-10B/110
E227-10C/110
E227-10D/110
E227-10E/110
E227-10G/110
Pilot light with lamp, 120 VAC

Clear
Red
Green
Yellow
Blue
E227-10E
Lamps
24 VAC
120 VAC
230 VAC
Note: Above devices are UL 508 recognized and IEC certified.
Special features
Safe connection via box terminals

Captive screws with Phillips/Slotted head, Posidriv system, Gr. 1
Snap-on labels available
Protection against unintentional touch acc. to DIN VDE 0106 Part 100
Lenses and pushbuttons in six colors
Elapsed time meter

Type
Catalog
number
24 VAC, 60 Hz
120 VAC, 60 Hz
240 VAC, 60 Hz
E233-24/60
E233-120/60
E233-240/60
Non-resettable
100,000 hours (99999.99)
List
price
$ 95
Delivery
schedule
Pack
units pcs.
Weight (KG)
1 piece
0.045
Delivery Class
pro M MDRC
5.4
AC1645 11/07
ABB

Technical data
Disc.
Sws.
Components for quick mounting onto DIN rails (35mm)

Mounting depth:
68mm
Mounting width:
1, 2, 3 and 4 pole switches = 17.5mm (= 1 module)
E220 Switches, 16 & 25A

Switching capacity:
Short-circuit withstanding capacity:
Toggle sealable:
Connection cross-sections:
Rated AC voltage:
1.25 In, 1.1Un, cos j = 0.6

3 kA, 380V, cos j = 0.9
In ON and OFF positions
Up to 1 x 6mm2 or 2 x 2.5mm2
240 VAC UL/CSA (E171252)
250/440 VAC IEC
E240/270 Disconnect switches, 45, 63, 80, & 100A

Switching capacity:
Short-circuit withstanding capacity:
Connection cross-sections:
Rated AC voltage:
1.25 In, 1.1Un, cos j = 0.3

E240 = 10kA, E270 = 25kA RMS
E240 up to 25mm2
E270 up to 50mm2
240/400/415 VAC
E Series components for quick mounting onto DIN rails (35mm)

Mounting depth
Mounting width:
Color:
Connection cross sections:
Rated current:
Rated voltage:
Rated voltage:
68mm
17.5mm (=1 module)
RAL 7035, grey
Up to 1 X 6mm2 or 2 X 2.5mm2
16A
250 VAC IEC
240 VAC UL/CSA (E171252)
Terminal markings
pro M MDRC
Terminal assignments for pushbuttons and indicator lights
ABB
5.5
AC1645 11/07
Dims

Approximate dimensions
E220
E220, 16 & 25A
E233
pro M MDRC
E240/270
5.6
AC1645 11/07
ABB
Quick information
Control Products
Power Quality Products
Entrelec Products
Circuit Protective Devices
Atlantic Region
Brockway Enterprises
51 Cobequid Road
Lower Sackville, NS
B4C 2N1
Tel.: (902) 864-8236
Fax: (902) 865-8252
Eastern Region
ABB Inc.
2117, 32e Avenue
Lachine, QC CANADA
H8T 3J1
Tel.: (514) 420-3100
Fax: (514) 420-3137
Central Region
ABB Inc.
201 Westcreek Blvd.
Brampton, ON L6T 5S6
Tel.: (905) 460-3000
Fax: (905) 460-3395
Mid-West Region
ABB Inc.
# 110 - 4411-6 th Street S.E.
Calgary, AB T2G 4E8
Tel.: (403) 278-7111
Fax: (403) 278-8232
Electro-Tech Sales Ltd.
# 10 - 2166 Notre-Dame Ave.
Winnipeg, MB R3H 0K2
Tel.: (204) 694-7063
Fax: (204) 697- 0568
Central Region
Adanac Sales Inc.
# 3 - 2075 Brigantine Drive
Coquitlam, BC V3K 7B8
Tel.: (604) 540-0220
Fax: (604) 540-0124
ABB Inc.
2117, 32e Avenue
Lachine, QC CANADA H8T 3J1
Tel.: (514) 420-3100
Fax: (514) 420-3137
Web site: www.abb.ca
AC1645 - November 2007

MCB Ranges of ABB

Uploaded by

Copyright:

Available Formats

MCB Ranges of ABB

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MCB Ranges of ABB

Uploaded by

Copyright:

Available Formats

System pro M compact

2 pro M Supplementary Protectors

3 pro M S500 Supplementary Protectors

4 pro M compact - Residual current devices

5 pro M - Modular installation equipment

The new generation of miniature circuit breakers.

S200 U and UP series are UL 489, CSA C22.2

Miniature circuit breakers (MCBs) are used throughout the world in

UL 489 / CSA C22.2 NO 5.0

UL 1077 / CSA C22.2 NO 235

1 All values are relative to MCB's ampere rating.

Miniature Molded Case Circuit Breakers

DIN rail holder

Discount schedule DS-S2

Discount schedule DS-S2C

Discount schedule DS-S2

Discount schedule DS-S2

Discount schedule DS-S2

Discount schedule DS-SU

Discount schedule DS-SU

Discount schedule DS-SU

Discount schedule DS-SU

A - Standard item, stock to 2 weeks lead time

Discount schedule DS-S2A

Discount schedule DS-S2A

Busbar end caps

Busbar tooth covers (5 pcs)

For use on:

1/0 (50mm2) Straight

1/0 (50mm2) Straight

Discount schedule DS-S2A

Bell alarm or auxiliary contacts (universal)

For field mounting:

Discount schedule DS-S2A

Front mounting kit

Includes flange, mounting rail and hardware.

Front mounting clip

Front mounting bracket

For flush mounting of three pole MCBs: includes hardware.

Enclosure, IP55 (IEC only)

Discount schedule DS-S2A

Minimum operating voltage:

UL/CSA rated voltage &

50/60Hz (see below)

50/60Hz (see below)

50/60 Hz (see below)

50/60Hz (see below)

35mm DIN rail

35mm DIN rail

35mm DIN rail

Main & shunt trip terminals:

In<32A, 20,000 operations

In<32A, 20,000 operations

In<32A, 20,000 operations

In<32A, 20,000 operations

30g minimum of 2 impacts,

30g minimum of 2 impacts,

30g minimum of 2 impacts,