This document provides an overview and installation guide for a computer case. It includes:
1. Product specifications and diagrams of the case layout.
2. A step-by-step guide to installing components like the power supply, motherboard, fans, and hard drives.
3. Instructions for cable management and completing the installation.
4. A diagram showing how to connect the front panel I/O ports to the motherboard.
This document provides an overview and installation guide for a computer case. It includes:
1. Product specifications and diagrams of the case layout.
2. A step-by-step guide to installing components like the power supply, motherboard, fans, and hard drives.
3. Instructions for cable management and completing the installation.
4. A diagram showing how to connect the front panel I/O ports to the motherboard.
This document provides an overview and installation guide for a computer case. It includes:
1. Product specifications and diagrams of the case layout.
2. A step-by-step guide to installing components like the power supply, motherboard, fans, and hard drives.
3. Instructions for cable management and completing the installation.
4. A diagram showing how to connect the front panel I/O ports to the motherboard.
This document provides an overview and installation guide for a computer case. It includes:
1. Product specifications and diagrams of the case layout.
2. A step-by-step guide to installing components like the power supply, motherboard, fans, and hard drives.
3. Instructions for cable management and completing the installation.
4. A diagram showing how to connect the front panel I/O ports to the motherboard.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 16
Ver 2.
0: 2007/06
CONTENTS 1. Product Overview ............................................................................................ 02 1.1 Specifications .................................................................................................... 02 1.2 Diagram.............................................................................................................. 02 1.3 Part List .............................................................................................................. 03 1.4 Accessory Carrying Case ............................................................................ 03
2.1 How to remove the Side Panel and install the Power Supply ........................ 04 2.2 How to install the Motherboard ......................................................................... 05 2.3 How to install the add-on cards ........................................................................ 05 2.4 How to install the 3.5 and 5.25 Devices ....................................................... 05 2.5 How to install / replace case fans .................................................................... 07 2.6 How to clean the filter ....................................................................................... 08 2.7 Change the opening direction of the front panel ............................................ 09 2.8 Cable Management ............................................................................................ 10 2.9 Completing Installation ...................................................................................... 10
3. I/O Function Panel Installation Guide .............................................. 11
Icon Description
A tool for assembling is needed
01
1. Product Overview 1.1 Specifications Available Color Dimensions Material M/B Type 5.25" Drive Bay 3.5" Drive Bay Expansion Slot Chassis:Silver , Bezel:Black (W)266mm x (H)598mm x (D)628mm Chassis:STEEL Appearance:AL Extended ATX, ATX 5 Exposed (without the use of exposed 3.5" Drive bay) 4 Expose (with the use of one 3.5" Drive bay) 6 Hidden; 1 Exposed (converted from one 5.25" Drive Bay) 7 Bottom fan: 120x120x25 mm x 1, 1200 rpm, 17 dBA (intake, included) Top fan: 120x120x25 mm x 2, 1200 rpm, 17 dBA (exhaust, included) Rear fan: 120x120x25 mm x 1 , 1200 rpm, 17 dBA (exhaust, included) HDD fan: 120x120x25 mm x 1, 1200rpm, ( Optional ) USB 2.0 x 4, IEEE 1394 x 1, Audio x 1, SPK x 1, eSATA x 1 PS2 / EPS 12V ( Optional )
Cooling System
I/O Panel Power Supply
Product specifications are subject to change without notice
1.2 Diagram FRONT-VIEW BACK-VIEW TOP-VIEW
HEADSET USB2.0 IEEE1394 E-SATA
RESET
MIC
POWER
02
1.3 Part List
1 2 3 4 5 6 Exclusive Giveaway CM Accessory Box
17
16
15 14
13
7 Item 1 2 3 4 5 6 7 8 9
9 10 Q'ty 1 1 2 1 1 1 1 1 1
11
12 Parts Name
Parts Name
Top Cover Rear Fan 120x25mm Top Fan 120x25mm Filter (Rear) VGA Air Duct Left Side Panel Shutter Fan Cover Bottom Fan 120x25mm Fan Holder
Item 10 11 12 13 14 15 16 17
HDD Tray Filter (Front) 5.25'' Shield Front Door FDD-Bracket Right Side Panel CM Accessory Box Casing
Q'ty 6 1 5 1 2 1 1 1
1.4 Accessory Carrying Case
Figure Parts Name Q'ty 1 20
Used for
Screw Driver (Keyring) Cable Tie
For system install Cable Management For HDD M/B Tray (for Extend ATX M/B) M/B Tray MB Tray, Power CD-ROM,FDD,3.5'' Bracket For Power Cable 8 pin Power cable management
HDD-Screw Stand-off (16.9mm) Stand-off (6.5mm) #6-32 M3 Extended Cable Tie Mount
24 3 17 40 30 1 8
03
2. Installation Guide Note: The sequence of installation may differ depending on the type of case and devices used.
2.1 How to remove the Side Panel and install the Power Supply. 1 Remove the Side Panel
2 Remove the VGA Air Duct
3 Install the Power Supply
#6-32
Inlet for PSU
04
2.2 How to install the Motherboard.
Note: If the I/O plate of the case does not fit your motherboard,please remove the I/O plate and replace it with the one provided with the motherboard.
1 Align the stand-off holes of M/B with
MB tray and screw the stand-offs.
2 Make sure the holes on the Motherboard and chassis line up completely before securing the screws. #6-32
Stand-off (16.9mm) for Extend ATX M/B Stand-off (6.5mm) for ATX M/B
2.3 How to install the add-on cards.
1 Remove the back slot plate and install the add-on card into the slot on the Motherboard
2 Secure the screw
2.4 How to install the 3.5 and 5.25 Devices.
1 2 3 M3
Notice: We strongly recommend installing a device that is no bigger then 3.5" in the 5 device bay to guarantee optimal thermal performance for HDDs.
th
05
* Insert the device into 5.25 drive bay 1
2 Unlock
Lock
* FDD/Card Reader Installation 1
M3*5
Unlock
Lock
06
* Installation of IDE and SATA Hard Drives 1
2.5 How to install / replace case Fans
* Install or replace the top fans Supports two 120mm or 140mm Fans
* Replace the bottom fan
Supports 120mm Fan
07
* Install the rear fan (Optional item)
* Install the HDD fan (Optional item) 1 2
* Install the VGA Air Duct 1 2
2.6 How to clean the filter
08
2.7 Change the opening direction of the front panel
1 Press Down
Push up to remove hinge.
Lift up and out
Remove hinges and insert into other side
Switch the magnet and screw to the opposite side.
Replace door - it should now open from the opposite direction.
09
2.8 Cable Management
SATA
SATA Power Wire
Power Wire
2.9 Completing Installation
10
3. I/O Function Panel Installation Guide
Please refer to the illustration in the section of USB2.0, IEEE 1394a, eSATA and Audio connector from the motherboard user manual. Please select the motherboard which uses the same USB2.0, IEEE1394, eSATA, AC97,HD Audio standard as below; otherwise, it will cause damages to device(s). The following illustration is a connection diagram for the front panel I/O cable. NEVER connect an IEEE1394 cable to the USB2.0 connector. Doing so will damage the device. NEVER connect a USB2.0 cable to the IEEE1394 connector. Doing so will damage the device. On some motherboards, the connectors for IEEE1394, eSATA, USB2.0 and Audio are not the same as the drawing below. Please check with your motherboard manual before installing.
Motherboard Front panel IEEE 1394 connector TPA+ GND TPB+ +12V No Pin Front panel USB connector USB+5V LPLP+ GND No Pin Front panel eSATA connector GND TXP TXN GND RXN RXP GND
Cable IEEE 1394 connector
TPAGND TPB+12V GND Pin USB connector
USB+5V LPLP+ GND NC eSATA connector
Pin
Pin
AC'97 MIC MIC~BIAS FPOUT-R +5V FPOUT-L GND AUD GND RET~R NO PIN RET-L
