History of Canning
History of Canning
History of Canning
As more and more of the world was explored, and as provisioning armies took on greater
importance, the demand for canned foods grew. Thomas Kensett, who emigrated to the
United States, established the first U.S. canning facility for oysters, meats, fruits and
vegetables in New York in 1812. More than 50 years later, Louis Pasteur provided the
explanation for canning's effectiveness when he was able to demonstrate that the
growth of microorganisms is the cause of food spoilage.
The basic principles of canning have not changed dramatically since Nicholas Appert and
Peter Durand developed the process. Heat sufficient to destroy microorganisms is
applied to foods packed into sealed, or "airtight" containers. The canned foods are then
heated under steam pressure at temperatures of 240-250°F (116-121°C). The amount
of time needed for processing is different for each food, depending on the food's acidity,
density and ability to transfer heat. For example, tomatoes require less time than green
beans, while corn and pumpkin require far more time.
Processing conditions are chosen to be the minimum needed to ensure that foods are
commercially sterile, but retain the greatest flavor and nutrition. All processes must be
approved by the U.S. Food and Drug Administration. Once the cans are sealed and heat
processed, the food maintains its high eating quality for more than two years and is safe
to eat as long as the container is not damaged in any way. And, like the home canning
process, no preservatives are added or necessary.
The sequence of steps in the canning process differs with the product. Fruits and
vegetables may be peeled or pitted, and have stems removed prior to canning. Some
vegetables receive a heat treatment before they are placed in the can to remove air and
improve packing. (Think about the bulk of raw vs. cooked spinach!) Acid juices, like
orange and tomato, and acid vegetables, such as sauerkraut, can be sterilized before
they are placed into containers. Seafood is usually packed after being boned or shelled,
with the exception of smaller fish like sardines and anchovies, or even salmon, which
have bones that are softened by heating. Meats and fish, like tuna, are usually cooked to
soften the flesh before canning, separated from bones, compacted and placed in cans
with appropriate liquid.
One significant difference in the modern canning process is that today's cans are made
of 100% recyclable steel.
Safety Benefits
The canning process was developed to preserve food safely and for long periods of time.
Once a food is packed into a can, the can is heated to a temperature extreme which kills
all known microorganisms. In addition, most processed foods are closely monitored,
using a system called Hazard Analysis and Critical Control Point, or HACCP. A HACCP
system identifies areas of potential contamination within the food process and builds
check points to ensure that the highest possible safety standards are maintained at all
times. Modern processors maintain close watch on the heating process, ensuring that the
canned food that reaches the market is the safest possible product for the consumer.