SPECIFICATIONS

GENERAL CHARACTERISTICS IMO A.806 (19), MSC 68(68) Annex 3, Rules and Regulations IEC 61097-3 Annex A, IEC 61162-1 (2000), IEC 60945 (2002), EN 300 373-1 (2002), EN 300 338 (2004), EN 301 033 (2005), ETS 300 067A1 (1998), ITU-R M.493-11, M.541-9, M.476-5, M.491-1, M.492-6, M.625-3, M.1173-3 1.6 to 27.5 MHz (100 Hz steps) Frequency Range TX: 0.1 to 30 MHz (10 Hz steps) RX: Number of Channels 256 user-specified channels plus ITU, SSB/TELEX channels Communication Mode Full-duplex*, Semi-duplex or Simplex Class of Emission J3E, J2B (F1B) TRANSCEIVER RF Output Power Antenna Tuning Speed Sensitivity INTERFACE POWER SUPPLY

IEC 61162-1 24 VDC receive 3 A, transmit 60 A 100/220 VAC* *with an optional Rectifier PR-850A

EQUIPMENT LIST
Standard FS-5070T 1. Transceiver Unit 1 Unit FS-2571C 2. Control Unit 1 Unit 3. Antenna Coupler with BK Relay Kit AT-5000-H-B 1 Unit HS-2003-15 1 Unit 4. Handset with 1.5 m curled cable Option 1. Rectifier PR-850A for 100/220 VAC 2. Remote Control Unit FS-2571C 3. Handset HS-2003-15 for Remote Control Unit 4. NBDP Terminal IB-583 5. NBDP modem OP05-97 6. Matching Box ARD-1 for receiving antenna on duplex 7. Headphone ST-90 8. External Speaker SEM-21Q 9. Printer PP-510 10. Printer Interface IF-8500 11. Flush Mount Kit OP05-98 for FS-2571C 12. Distress Alert Unit IC-302-DSC 13. Received Call Unit IC-303-DSC
N.B., *Operating frequency should not exceed 22 MHz for full-duplex communications. **RF output power should be restricted to 400 W on MF and NBDP.

500 W pep** 7 to 18 m, whip or wire 2 to 15 sec. +7 dB V (4-27 MHz, J3E)

DSC Receiving Frequency All DSC Frequencies in MF/HF MessageStorage Receive: 50 messages max., plus 50 non-distress messages Transmit: 50 messages, telephone NO., Frequency, etc.

CONTROL UNIT FS-2571C 1.6 kg, 3.53 lb.

298 11.7

INTERCONNECTION DIAGRAM
106 4.2 103 4.1 65 2.6
Handset HS-2003

20 0.9

NBDP Terminal IB-583

TX (Duplex) or TX/RX (Semi-duplex/ RX (Duplex) Simplex) Printer PP-510

DSC Distress/ Safety

DSC routine Watch Receiver

MF/HF Radiotelephone

136 5.4 127 5.0

108 4.3

70 2.8
220 8.7

Antenna Coupler AT-5000

Matching Box ARD-1

18 0.7

10 0.4
Remote Control Unit FS-2571C Transceiver Unit FS-5070T EPFS (GPS)
NBDP Modem Routine DSC W/R (Option)

TRANSCEIVER UNIT FS-5070T 26 kg, 57.3 lb.

198 7.8 151 5.9 120 5.3 300 11.8

MF/HF Radiotelephone
Distress Alert Unit IC-302-DSC Received Call Unit IC-303-DSC

External Speaker

Control Unit FS-2571C

340 13.4

SEM-21Q

FS-5070

650 25.6

Rectifier with Changeover Facility PR-850A

300 11.8

100/220 VAC

24 VDC (Reserve Power Supply)

24 VDC

86 3.4

30 1.2 365 14.3 390 15.4

Option

All brand and product names are registered trademarks, trademarks or service marks of their respective holders.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

FURUNO ELECTRIC CO., LTD. FURUNO FRANCE S.A.S. FURUNO NORGE A/S
Nishinomiya, Hyogo, Japan Phone: +81 (0)798 65-2111 Fax: +81 (0)798 65-4200, 66-4622 Bordeaux-Mrignac, France Phone: +33 5 56 13 48 00 Fax: +33 5 56 13 48 01 lesund, Norway Phone: +47 70 102950 Fax: +47 70 102951

FURUNO POLSKA Sp. Z o.o.

Gdynia, Poland Phone: +48 58 669 02 20 Fax: +48 58 669 02 21

Catalogue No. S-024a

09023SS Printed in Japan

FURUNO U.S.A., INC.

Camas, Washington, U.S.A. Phone: +1 360-834-9300 Fax: +1 360-834-9400

FURUNO ESPAA S.A.

Madrid, Spain Phone: +34 91-725-90-88 Fax: +34 91-725-98-97

FURUNO SVERIGE AB
Vstra Frlunda, Sweden Phone: +46 31-7098940 Fax: +46 31-497093

FURUNO DEUTSCHLAND GmbH

Rellingen, Germany Phone: +49 4101 838 0 Fax: +49 4101 838 111

FURUNO (UK) LIMITED

Havant, Hampshire, U.K. Phone: +44 23 9244 1000 Fax: +44 23 9248 4316

FURUNO DANMARK AS
Hvidovre, Denmark Phone: +45 36 77 45 00 Fax: +45 36 77 45 01

FURUNO FINLAND OY
Espoo, Finland Phone: +358 9 4355 670 Fax: +358 9 4355 6710

FURUNO EURUS LLC

St. Petersburg, Russian Federation Phone: +7 812 767 15 92 Fax: +7 812 766 55 52

MF/HF Radiotelephone

Reliable MF/HF Radiotelephone for general and distress communication with integrated DSC/DSC Watch Receiver/NBDP Modem
Designed for full-duplex communications GPS position automatically fed to distress alert NBDP modem incorporated (Optional Supply) Simplified operation with use of a rotary knob Flexible installation thanks to component system configuration Antenna Dummy Load incorporated

500 W MF/HF radiotelephone with DSC facility Fully meets GMDSS carriage requirements Distress, safety and routine communication Instant selection of 256 user-specified channels with a rotary knob or direct keyboard input 160-character message on high-legibility LCD File editing for ready transmission of DSC messages

The FS-5070 complies with the following international rules and regulations: IMO A.806 (19), MSC 68(68) Annex 3, ITU-R M. 493-11, M. 541-9, M. 476-5, M. 491-1, M. 492-6, M. 625-3, M. 1173-3 IEC 61097-3 Annex A, IEC 61162-1 (2000), IEC 60945 (2002) EN 300 373-1 (2002), ETS 300 067A1 (1998), EN 300 338 (2004), EN 301 033 (2005)

Control Panel
Operational setting can be configured by utilizing the knobs and keys on the front panel. The following is a brief overview of the operational settings of the FS-5070.

DISTRESS key:
Quick transmission of distress alerts

CANCEL key:
Cancellations of: erroneous data input, actions, alarms, transmission and error indicator

MF/HF Radiotelephone

CALL key:
Transmission of DSC routine calls

FS-5070
The FS-5070 is the new 500 W MF/HF radiotelephone for general and distress communication, which satisfies the carriage requirement for application in the GMDSS A3-A4 sea areas. In addition to radiotelephone operation, DSC (Digital Selective Call) both on general and distress communications is available with an internal DSC Watch Receiver. The FS-5070 works on all authorized transmission frequencies between 1.6 and 27.5 MHz. Receiver frequencies can be selected between 100 kHz and 30 MHz in 10 Hz steps. The transmission and receiver frequencies can be selected separately or in pair. The FS-5070 maintains continuous watch on a distress and routine call while maintaining normal voice communications: DSC channels can be individually set, or all selected channels can be automatically scanned to make use of the services. When a DSC message is received, the FS-5070 generates audio and visual alarms. Optionally, a NBDP modem can be accommodated in the transceiver unit for allowing NBDP communications as well as distress message and maritime safety information handling. The digital frequency synthesizer facilitates high frequency stability for DSC and NBDP as well as for telephony communications. The FS-5070 consists of a control unit with a telephone handset, a transceiver unit and an antenna coupler. Its component system configuration allows for flexible installation onboard, and its compact control unit facilitates simplified installation within a communication console.

PUSH TO ENTER rotary knob:

Tuning adjustment and channel selection for radiotelephone, Menu selection for DSC

PWR/VOL rotary knob:

Volume control

Alphanumeric keys
1/RT: 2/DSC: 3/TEST: Switching operating mode to radiotelephone, switching frequency to 2182 kHz/J3E Switching to DSC mode 8/PRINT: Implementation of daily test 4/IntCom: Activating/deactivating the intercom function 5/ACK/SQ: Activating/deactivating squelch and setting of AUTO/MANUAL DSC watch-keeping 6/SCAN: Activating/deactivating the scanning of DSC channels 9/ : Printing communication log, DSC messages (except for DSC scanning and radiotelephone display) and the result of the daily tests Dimmer control and contrast of the LCD 7/ : Activating/deactivating alarm/buzzer (except for deactivating distress alerts and urgency alarms)

*/FILE/CURSOR: Opening the SEND MESSAGE FILE and shifting the cursor 0/LOG/TUNE: #/SETUP: Tuning of the antenna coupler and displaying the DSC message log Opening the set-up menu