Vs 40 GB
Vs 40 GB
Vs 40 GB
Since its introduction in 1998, Gardner Denver Variable Speed technology has saved energy for numerous satisfied customers worldwide.
The VS 40 compressor covers a capacity range of 1.2 m3/min to 6.8 m3/min at 7 bar. It features the proven ES technology and is equipped with a frequency converter to control the capacity exactly according to compressed air requirements. The VS 40 compressor uses standard electric motors, unlike some competitive units, which use high-speed or special motors. An optional integrated dryer is also available. The heart of the VS 40 compressor is the TEMPEST integrated compressor unit now with the new ENDURO PLUS air end. The all new ENDURO PLUS air end rotor profile is a direct result of Gardner Denvers 40 years of experience in screw compressor design. The new and company own rotor profile ENDURO PLUS performance improvement is impressive! You as the customer will see the direct benefit of the greatly improved part load efficiency in lower energy consumption and money savings.
ENDURO 12
-8%
-2%
VS 40 operation range
Rotation speed
ENDURO PLUS VS. ENDURO, energy savings over whole operating range.
50
0 0
Modulation ON/OFF-load VS
50
Full-load / off-load ratio (%)
30% Savings
100
Dimensions (L x W x H): 1005 (1490) x 690 (1021) x 1700 (2075) Dimensions in brackets with RD dryer.
Capacity at nominal pressure** m3/min 1.23 - 6.80 1.24 - 6.26 1.48 - 4.94 cfm 43 - 240 44 - 221 52 - 175
For RD models max pressure is 0,25 bar less. Pressure dew point of integrated dryer at reference conditions: +3C. Reference conditions: Intake air temperature for dryer: + 35C, ambient temperature: +25C ** Capacity measured in accordance with Cagi Pneurop PN2CPTC2 and the following working pressures are used: 7,5 bar models at 7 bar, 10 bar models at 9 bar and 13 bar models at 12 bar *** Noise level measured in accordance with Cagi Pneurop PN8NTC2.2 3 dB(A) with Super Novox enclosure. Noise level measured at 100% capacity
For additional information, please contact your local representative or Gardner Denver Oy, P.O. Box 516, FIN-33101 Tampere, FINLAND www.gardnerdenver.fi e-mail:info@gardnerdenver.fi Telephone: +358 (0) 205 44 141, Telefax: +358 (0) 205 44 140 Specifications subject to change without notice. Copyright 2003 Gardner Denver