Advance sections

CE marked structural sections

BS 5950 version

The Blue Book

A copy of the full interactive blue book for Advance sections is
available for download from www.tatasteelconstruction.com

This essential tool for steel designers presents section properties and member capacities
in tabular form to BS 5950-1 and BS EN 1993-1-1 and includes:

Dimensions and properties,

Effective properties (Compression, Bending, Axial and Bending),
Reduced plastic modulus,
Detailing and fire parameters,
Axial compression,
Bending moment,
Combined axial and bending,
Web bearing and buckling.

If you have not already done so, you will need to register with www.tatasteelconstruction.com to download the software.

Contents
Tata Steel

Page 4

Advance section range

Page 5

Certification of our processes

Page 6

Specifying Advance sections to BS 5950

Page 7

CE marking of structural steel products

Page 10

The benefits of steel construction

Page 12

Index of tables

Advance UK Beams

Advance UK Columns

Advance UK Bearing Piles

Advance UK Parallel Flange Channels

Shallow Floor Beams

Asymmetric Slimflor Beams (ASB)

Slimflor Beams (SFB)

Advance UK Angles

Equal

Unequal

Advance UK Tees

Split from Advance UK Beams

Split from Advance UK Columns

Page 15
Page 16
Page 20
Page 22
Page 24

Detailing and fire

Advance UK Beams

AdvanceUK Columns

AdvanceUK Bearing Piles

Advance UK Parallel Flange Channels

Shallow Floor Beams

Asymmetric Slimflor Beams (ASB)

Advance UK Angles
Equal
Unequal

AdvanceUK Tees

Split from AdvanceUK Beams

Split from Advance UK Columns

Page 26
Page 28
Page 30
Page 32
Page 34
Page 38
Page 40
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 50

Product specification/tolerances

Page 52

Offices and agents for Tata Steel products

Page 58

Tata Steel in construction

Page 59

Technical support

Page 59

Tata Steel
Tata Steel is a top ten global steel maker with an annual crude steel
capacity of over 28 million tonnes per annum (mtpa) and the worlds
second most geographically diversified steel producer with operations
in 26 countries and a commercial presence in over 50 countries. In addition
to manufacturing, processing and distributing steel products, the company
provides related services in design, technology and consultancy.

Tata Steel was founded in India in 1907

and has always believed that the principle
of mutual benefit - between countries,
corporations, customers, employees and
communities - is the most effective route
to profitable and sustainable growth. Since
2004 the Company has expanded globally,
and its larger production facilities include
those in India, the UK, the Netherlands,
Thailand, Singapore, China and Australia.
Operating companies within the Group
include Tata Steel Limited (India), Tata
Steel Europe Limited (formerly Corus),
NatSteel (Singapore), and Tata Steel
Thailand (formerly Millennium Steel).
The Tata Steel Group, with a turnover of
US$ 26.13 billion in FY '11-12, has over
80,000 employees across five continents
and is a Fortune 500 company. The Annual
Report for 2011-12 can be downloaded
from http://www.tatasteel.com/investors/
performance/annual-report.asp

Tata Steel is part of the Tata Group, Indias

largest industrial conglomerate. Both
Tata and Tata Steel have a long history of
charitable donations and social responsibility,
with Tata spending approximately 4%
of the Companys profit after tax on
corporate social responsibility initiatives.

Tata Steel endeavours to improve the

quality of life in the communities in which
the Company operates. Tata Steels
charitable projects have touched the
lives of over 800,000 people in India.
Tata Steels vision is to be the worlds steel
industry benchmark through the excellence
of its people, its innovative approach
and overall conduct. Underpinning this
vision is a performance culture committed
to aspiration targets, safety and social
responsibility, continuous improvement,
openness and transparency.
Our latest Corporate Citizenship report and
the Companys Responsible Procurement
Policy can be downloaded from http://
www.tatasteel.com/corporate-citizenship/
index.asp or you can contact us at the
address on the rear cover for a copy.

Advance section range

Our Advance section range has been developed to reflect current structural
design practice and make it easier to specify Tata Steel CE marked structural
sections compliant with the EU Directive on Construction Products.
Whats new?
Since the Advance range of sections was
introduced in 2007, designers have gradually
moved away from lower steel grades to
take advantage of the reduced weight
of structural framing materials afforded
by the use of higher grades of steel. Our
rolling programme reflects that migration
and we recommend that you contact your
steel supplier to check availability should
you intend to design in S275 grade steel.
Reference should also be made to our price
list as it illustrates the wide range of options,
in addition to grade, available to customers.
Why specify Advance sections
from Tata Steel?
As well as simple compliance with CPD
and an enhanced range of sections to
help maximise design effectiveness,
specifying UK Advance sections from Tata
Steel brings a number of other benefits.

Manufacturing excellence
Tata Steel was the first steelmaker in the
world to gain approval to CE mark its
structural sections and plates to meet
the CPD requirements. Advance sections
from Tata Steel were also the first in the
world to achieve approval for the tough
Lloyds Register materials quality scheme.
Images of the Certificate of Conformity, the
Certificate of Approval issued by Lloyds
Register Verification confirming that our
Quality Management System meets the
requirements of ISO 9001 and the Certificate
confirming that our manufacturing
processes meet the requirements of
ISO 14001 can be seen on page 6.
Significant investment in the manufacturing
technology at our Advance section rolling
mills at Scunthorpe and Teesside puts
them amongst the most advanced in the
world. Where the application needs it,
we can produce structural sections to the
most demanding of specifications, well
beyond the minimum requirements set
by national and international standards
for dimensional tolerance and material
performance. Subject to volume requirements
our tight manufacturing control enables
us to produce bespoke sections where
the depth and flange/web thickness of a
section can be tailored to the particular
needs of the project. Please contact us
if you want to discuss particular product
requirements beyond our standard range.
Service leadership
Our Advance sections rolling programme
offers unrivalled availability, ensuring that
the products you specify are available when
you need them. Our world-class automated
distribution warehouse at Scunthorpe and
the new off-line processing centre at Teesside
will ensure that products are dispatched

on time and in the best possible condition.

Free technical advisory services are available
to assist with all aspects of the use of our
products from initial material selection
through to structural design and associated
issues including fire engineering, durability,
acoustic and vibration performance.
Commitment to technical development
We are committed to improving the effective
application of steel in construction. Longterm investment in developments such
as plastic design, fire engineering and
composite construction has helped position
structural steel as the preferred choice
for the structural frame of industrial and
commercial buildings in the UK. Research
work on acoustics and vibration performance
is now also showing steel to be an effective
choice in the health and residential markets.
Significant work on steels contribution
to sustainable development is ongoing
along with the production of application
guidance to help in the introduction of
harmonised European design codes and
ensure that construction clients, customers
and designers are able to continue to
make the most effective use of steel.
Sustainable performance
Steel construction products have many of
the qualities that help to achieve the balance
between the environmental, economic and
social performance that is so important to
sustainable development. Tata Steel takes its
corporate responsibilities for health, safety
and the environment very seriously. We also
recognise that our operations influence the
societies we operate in and take an active role
in a broad range of community initiatives.

Certification of our processes

CertificateGB05/66009

Themanagementsystemof

POBox1,BriggRoad,Scunthorpe,NorthLincolnshire,DN161BP,UK
hasbeenassessedandcertifiedasmeetingtherequirementsof

Forthefollowingactivities

Thiscertificateisvalidfrom07May2011until07May2014and
remainsvalidsubjecttosatisfactorysurveillanceaudits.
Recertificationauditduebefore07May2014
Issue17.Certifiedsince07May1999

Authorisedby

SGSUnitedKingdomLtdSystems&ServicesCertification
RossmoreBusinessParkEllesmerePortCheshireCH653ENUK
+44(0)1513506666+44(0)1513506600www.sgs.com

SGSEMS040311

Page1of1

ThisdocumentisissuedbytheCompanysubjecttoitsGeneralConditionsof
CertificationServicesaccessibleatwww.sgs.com/terms_and_conditions.htm.
Attentionisdrawntothelimitationsofliability,indemnificationandjurisdictional
issuesestablishedtherein.Theauthenticityofthisdocumentmaybeverifiedat
http://www.sgs.com/clients/certified_clients.htm.Anyunauthorizedalteration,
forgeryorfalsificationofthecontentorappearanceofthisdocumentisunlawful
andoffendersmaybeprosecutedtothefullestextentofthelaw.

Specifying Advance sections to BS 5950

The simplified naming protocol adopted for Advance sections covering
both section designation and material specification makes it easier to
specify steel sections which are fully compliant with CE marking.
Steel specification
Steel sections used in the UK should comply
with EN10025. Non alloy structural steels are
manufactured in accordance with Part 2 and
thermo-mechanically rolled weldable fine
grain structural steels in accordance with
Part 4.
The tables here show the typical UK grades
and properties for structural sections to
EN10025:Parts 2 and 4 and how these relate
to the simplified material specification for
Advance sections from Tata Steel.

Advance sections

EN10025:Part2

Grade
Grade
Yield
Tensile Charpy v-notch

(ReHa) min
Rma longitudinal
Strength at t=16mm
Temp(C) Energy (J)
(N/mm2) t=16mm
Advance275JR

S275JR

275 410/560

Advance275J0

S275J0

275 410/560

0 27

Advance275J2

S275J2

275 410/560

-20 27

Advance355JR

S355JR

355 470/630

20 27

Advance355J0

S355J0

355 470/630

0 27

Advance355J2

S355J2

355 470/630

-20 27

Advance355K2

S355K2

355

-20

Advance sections

470/630

20 27

40 *

EN10025: Part4

Grade
Grade
Yield
Tensile Charpy v-notch

(ReHa) min
Rma longitudinal
Strength at t=16mm
Temp(C) Energy (J)
(N/mm2) t=16mm
Advance355M

S355M

355

Advance355ML

S355ML

355 470/630

470/630

Advance420M

S420M

420

Advance420ML

S420ML

420 520/680

520/680

Advance460M

S460M

460

Advance460ML

S460ML

460 540/720

540/720

-20

40 *

-50 27
-20

40 *

-50 27
-20

40 *

-50 27

* 40J at -20o corresponds to 27J at -30o (See BS 5950 Table 7)

a Values apply parallel to the rolling direction

It should be noted that Advance sections can

be specified in JR, J0 and J2 sub-grades but for
situations where greater toughness is required,
sub-grade K2 is available in S355 grade steel.
In addition, M and ML specifications are
available for heavily loaded parts of welded
structures such as, bridges, flood gates,
storage tanks, water supply tanks, etc., for
service at ambient and low temperatures.

It is vitally important that structural steelwork

is specified correctly by the design engineer.
The steel specification must cover the strength
grade and the steel sub-grade. Specifying
the correct steel sub-grade is important to
ensure that brittle fracture is avoided.

The possibility of brittle fracture increases

at lower temperatures, with higher stresses,
with stress concentrations, with thicker steel
and at faster strain rates. If brittle fracture is a
possibility, a tougher steel sub-grade
must be specified. The design standard,
BS5950-1 addresses this by relating the
service temperature, the state of stress,
the type of detail and the strain rate to a
limiting thickness for each steel sub-grade.
Following selection of members for given
locations, the thickness of each element will
be known. Knowing the service temperature
(taken as -5C internally and -15C externally),
the state of stress and the likely details,
an appropriate sub-grade can be specified.
Based on the information given in the tables
opposite, which have been reproduced from
BS59501, the structural designer can choose
an appropriate sub-grade (or quality) such that
t<Kt1.
Where

t is the thickness of the member

usually taken as the flange
K is the factor from the table opposite
t1 is the limiting thickness from the
table opposite.

Circumstances which increase the possibility

of brittle fracture are indicated by a smaller
value of the factor K.

Factor K for type of detail, stress level and strain conditions

Type of detail or location Components in
tension due to
factored loads

Stress>0.3 Ynom Stress<0.3 Ynom
Plain steel

Drilled holes or reamed holes

1.5

Flame cut edges

1.5

Punched holes (un-reamed)

1.5

Welded, generally

1.5

Welded across ends of cover plates

0.5

0.75

Welded connections to unstiffened flanges,

see 6.7.5, and tubular nodal joints

0.5 0.75

Limiting thickness (t1) for different grades and sub-grades

Steel grade
Maximum thickness t1 (mm) when K=1
and quality according to minimum service temperature Tmin

Normal temperature

Internal

-5C

External
-15C

Advance275JR

36 20

Advance275J0

65 54

Advance275J2

94 78

Advance355JR

25 14

Advance355J0

46 38

Advance355J2

66 55

Advance355K2

79 66

[Reproduced from Table 3 of BS5950-1: 2000]

NOTE 1: Where parts are required to withstand
significant plastic deformation at the minimum service
temperature (such as crash barriers or crane stops) K
should be halved.
NOTE 2: Base plates attached to columns by nominal
welds only, for the purposes of location in use and
security in transit, should be classified as plain steel.
NOTE 3: Welded attachments not exceeding 150mm in
length should not be classified as cover plates.
NOTE 4: Where abrupt changes in cross-sections
coincide with the detail, (other than those covered by
descriptions above), e.g. service openings, notched
cut-outs, etc, the general stress levels shall take into
account the additional stress concentrating effect.

Components
not subject
to applied
tension

This table indicates the limiting thickness

(t1) for the common situations of steel used
in an internal environment and as exposed
steelwork. These values have been extracted
from Table 4 of BS5950-1: 2000 which also
covers much colder temperatures, such as
those found in refrigerated stores, and other
steelwork such as plates and hollow sections.
The sub-grade designation indicates the
Charpy impact value, which is a measure of
toughness (a combination of strength and
ductility).

Examples

Example 1

In most circumstances, it is appropriate to

make simple assumptions about the state of
stress and the sorts of details expected in a
structure, and base the choice of sub-grade
on these simple assumptions.
Generally, it would be expected that the
stress due to factored loads would be
more that 0.3 Ynom (the nominal material
yield strength). The tensile stress may
arise from member bending.
In most structures, components will
be welded.
Most steelwork is not subject to high
strain rates.
Thus in most circumstances, it would
be appropriate to take K = 1.
The structural designer can then directly
compare the flange thickness with the
limiting thickness and choose an appropriate
steel sub-grade.

The selected section is 457x191x89UKB in steel with a nominal material yield strength of
355N/mm2 subject to a stress >0.3Ynom
The flange thickness is 17.7mm.
Assuming K = 1 and that the steelwork is to be used inside a structure (Tmin = -5C).
Advance355JR steel is satisfactory, since t1 = Kt1 = 25mm > 17.7mm.
Note that if the same beam were to be exposed in service (Tmin = -15C), then Advance355J0
would be required, since the limiting thickness for Advance355JR is 14mm.

Example 2
The selected section is 457x191x89UKB in steel with a nominal material yield strength of
355N/mm2 subject to a stress >0.3Ynom
The flange thickness is 17.7mm.
Assuming K = 0.5 and that the steelwork is to be exposed in service (Tmin = -15C).
Advance355J0 steel will be needed, since t1 = 38mm and Kt1=19mm > 17.7mm

Assuming K = 1, the following diagram illustrates the sub-grades required for different flange
thicknesses.

0 14 20 25 36 38 46 54 65
JR

internal
Advance275

Advance355

JR

external

The assumption that K = 1 is not conservative

in three situations at high strain rates
(where the K values should be halved) and
in the specific situations where welded
connections are made to unstiffened flanges,
and welds occur across the ends of cover
plates. These details are shown to the right
and are both instances of unusually high stress
concentrations.

J2

JO

JR

internal
external

JO

JR

J2

JO

J2

JO

J2

Special Situations

K2

No flange stiffeners
in the tension zone

In some situations it can be advantageous to

carefully consider the fabrication details and
state of stress at locations along a member,
and also to assess the web and flange of a
member separately. It would be common for
welding to occur at the connections, at the
ends of members, where the stress may be
much lower than at mid-span.
Similarly, it may be that the types of stress
raisers described in the table of K values are
located only in the web, meaning that the
thicker flange may be classified with a higher
K factor.

K2

Welded cover plate

Welded cover plate

A
A

A
A

Sections subject to compression only have

higher K factors.
Weld across end
Weld across end

View on AA
View on AA

CE marking of structural steel products

Components to be permanently incorporated into construction projects
must be shown to comply with the EU Directive on Construction Products
(CPD 89/106/EEC). The CPD is enforced in the UK through the Construction
Products Regulations (CPR).

Compliance with the CPD can be

demonstrated in two ways. A product can be
CE marked by the manufacturer if it meets
a set of Essential Characteristics given in
the products harmonised standard or the
relevant authorities can declare that a product
complies with the regulations on a case by
case basis using information on the product
provided by the manufacturer. Although it is
generally agreed that the former is the easiest
method, CE Marking is not yet mandatory
in the UK but will be once the Construction
Products Regulations come into force on 1st
July 2013 and replace the existing Directive.
Because steel components are safety critical,
CE Marking is not allowed unless the Factory
Production Control (FPC) system under
which they are produced has been assessed
by a suitable Notified body that has been
approved to the European Commission. The
Tata Steel declaration of conformity and
Notified Body Approval Certificates can be
viewed on line at http://www.tatasteeleurope.
com/en/company/activities/long_products_
europe/publications and on Page 6.

10

Specification of products that are CE

marked gives confidence to designers
that the materials they are proposing
to use are compliant with both the
manufacturing standards and the relevant
Eurocodes for building and construction
and makes checking easier too.
However, it should not be assumed that
compliance with CPD only applies to the
as-rolled steel items. The fabrication process
introduces changes to the steel elements
by cutting, welding and drilling to name
but three operations, all of which could
affect the performance of the final item.
As a result, with effect from 1st July 2013,
steelwork subcontractors will also be required
to demonstrate that their processes meet
the necessary standards by applying a CE
mark to certify that the fabrication process
complies with BS EN 1090-1. Specification of
CE marked components makes certification
to BS EN 1090-1 significantly easier.
Consultants and main contractors should
also be aware of the implications of CE
Marking in respect of structural steelwork.
The consultant is responsible for specifying
the Execution Class for the structure as a
whole - or individual components where
appropriate in accordance with the
European fabrication standard BS EN 10902. The default is Execution Class 2 and the
National Structural Steelwork Specification
for Buildings 5th edition (CE Marking
version) is based on this execution class.

With effect from the 1st July 2013, the main

contractor must ensure that steelwork
contractors, and other construction product
manufacturers they employ, are certified to
produce and CE Mark fabrications within the
required Execution Class. After this date it
will be illegal to trade fabricated steelwork
and related products on the European
market without the relevant certification.
Incorrect CE Marking and failure to CE Mark
an item are criminal offences and anyone
found guilty could face a fine, imprisonment
or both. However a greater penalty may result
from closure of the perpetrators business
until the proper certification is in place
alongside a requirement to recall any noncompliant items already in the market place.

0038

What to look for.

The following example is a Tata Steel
certificate for structural steel sections which
not only provides the chemical analysis
and mechanical properties for the material
identified in items 4 and 8 but also includes
the CE mark to demonstrate that the product
complies with CPD. The relevant parts of the
certificate are:
1. The name and address of the supplier /
manufacturer
2. Identification of the Inspection certificate
type ( e.g. EN10204, 3.1 or 3.2). This
certificate complies with the requirements
of EN10204 and is a Type 3.1 - which is a
manufacturers test certificate showing
actual results linked to the batch of
material relevant to the certificate. A
Type 3.2 certificate is endorsed by an
independent inspection authority and
will again show actual results linked to
the relevant batch of material. If neither
type is identified on the certificate then
it is most probable that the certificate is
just a Quality Report (Certificate type 2.2)
and any information shown concerning
properties / chemistry should be treated
with care as it is only indicative of typical
results from this type of material and does
not give actual test results from the batch.
It is recommended that the minimum
acceptable certificate type for all metallic
materials used in structural and pressure
vessel applications is a 3.1. BS EN 1090
requires a Type 3.1 for compliance.

3. Date of issue of the certificate.

4. Details of the specification and the
product. This certificate covers UKC 203
x 203 x 46.1 to BS EN 10025 2. The
steel grade is S355, the sub grade is J0
indicating that the Charpy impact tests
were taken at 0oC; +AR indicates the asrolled delivery condition.
5. The CE mark and license number for
the third party inspectorate issuing the
manufacturer with the approval to apply
the CE mark to their products (e.g. 0038,
Lloyds Verification Services). The CE
symbol has defined dimensions and if the
font or size looks unusual it may indicate
that the certificate is false.
6. The unique number for the certificate
confirming the chemical and mechanical
properties of the tested items.
7. The unique number for the CE marking
certificate.
8. The identifying information for the tested
material. In this case there were 12 bars
from Cast 83228 and 36 bars from Cast
83232. All bars are 18300mm long as
indicated in the Specification/Product
area.
9. The mechanical properties (minimum
yield, tensile strength and elongation) of
the tested items the header indicates the
range of values to be achieved.
10. Charpy test results indicating the
toughness of the steel. The results cover
three tests on each cast with the average
value also displayed.
11. Chemical analysis of the test material

one analysis per cast. Results shown

on the inspection certificate should
be checked against the appropriate
material specification/standard to confirm
compliance and that the product is fit
for the purpose for which it was bought
but that should not be necessary for CE
marked material.
12. CEV (Carbon Equivalent Value) for the cast,
which is an indication of the weldability of
the steel.
13. Signature of an approved person.
14. Name and address of the original
customer.
Reputable suppliers of construction materials
are aware of the requirements to certify their
products and will have taken the necessary
steps to meet the requirements of the system.
The certificate above is genuine and provides
information on specific cast numbers and
test certificates to allow the product test
information to be confirmed against the
manufacturing records if necessary.

11

The benefits of steel construction

Designing and building in steel is the surest way to guarantee the many
value benefits such as safety, cost, aesthetics, efficiency and other gains
that are demanded by clients for modern structures. It is the best assurance
that your project will be completed on time, cost-effectively, safely and to
the most exacting quality and performance standards.
The market agrees, as is evidenced by steel constructions market share of
70% of multi-storey buildings, almost all single-storey industrial buildings,
and an increasing share of other building sectors and bridges.
Here are some of the wide range of benefits that are routinely delivered
simply by choosing steel.

Surety of Speed

Site Safety Secured

You wont fail to be impressed by the speed

at which your steel building frame is safely
erected, with much of the hard work to
exacting tolerances already achieved offsite
in factory controlled conditions a truly
modern method of construction which
reduces the impact of building activities on
the surrounding area. There are no labour
intensive shuttering and propping activities to
worry about, and no need for on-site storage
for these bulky items. Early erection of a
steel frame means follow-on trades achieve
a weather-protected environment in which
to work sooner than is otherwise possible.

Steel construction is inherently safer than

alternative forms of construction. Fabrication
takes place off-site in the far safer environment
of a factory; almost all of the potentially
hazardous activity that is unavoidable with
other methods of construction is managed out
of the construction process by selecting steel.
Factory fabrication processes are standard and
well practiced, providing a repeatable process
that is predictable and inherently safe.

12

Highly trained, specialist erectors work from

mobile elevating work platforms where
they are securely harnessed. Trial erections
can ensure that even the most complex
operations, or where on-site time is at a
premium, can be safely rehearsed to ensure
that everyone understands their precise role
when they reach site. Steel constructions
proven safety record is the envy of the
construction industry.

Long lasting

Steel and Sustainability

Whole-life impacts

A steel building is as flexible as its owner

or user needs it to be. The light and airy
column free spaces that can only be created
with steel are capable of easy adaptation to
multiple uses, and can be easily extended or
reconfigured.

Steel has sustainability built-in and has

perhaps the strongest sustainability case of
any rival material. It is the zero waste choice
as steel is the worlds most recycled material,
none of it need ever go to landfill as it has
a positive value and a key role to play in
the production of new steel some 94% of
steel construction components in the UK are
recycled or re-used.

The cradle-to-gate approach to assessing

environmental impacts is incomplete, and
does not take into account the energy
used during the buildings operation and,
importantly, at the end of life. As the wholelife LCA begins to feature more and more on
the sustainability agenda, it will not be good
enough to ignore these burdens. Clients are
increasingly asking about whole-life impacts
of the buildings they commission, which
brings the recyclability and low embodied
carbon benefits of steel into sharp focus.

Refurbishment and refreshing the appearance

of a steel-framed building and changing its
internal layout is relatively straightforward.
However, steel buildings retain their modern
appearance far longer than structures built
with alternative materials. Consequently,
refurbishment or alterations to exteriors are
not usually needed.
Steel structures can be designed for dismantling; demountability will prove its worth on
the legacy performance of the 2012 London
Olympic and Paralympic Games where the
main stadium and other venues have been
designed to be reduced in size, if required, and
possibly relocated elsewhere in the country.

Steel is multi-cycled, meaning it can be

recycled repeatedly without any loss of its
original properties a characteristic not
possessed by any other construction framing
material. Steel structures generally have lower
carbon footprints than concrete ones as a
tonne of relatively strong and lightweight
steel goes further than a tonne of concrete.
Steel sections can also be re-used on other
structures as the working life of a steel section
will typically far outlast the life of a modern
building.
Steel offers environmental, social and
economic advantages that feed through
to an outstanding sustainability case the
Triple Bottom Line of economic, social and
environmental benefits.

13

Support

Aesthetics

Fire safety and fire engineering

The competitive nature of the construction

market means that the steel industry is
constantly striving for better solutions for
the client. The steel industry has an excellent
track record for innovation, whether it is in
the form of new products backed up by sound
research or improved methods of working.
As well as looking to the future, the industry
provides unrivalled support to users of steel
through the network of Tata Steel Regional
Technical Managers and organisations such
as The British Constructional Steelwork
Association (BCSA) and the Steel Construction
Institute (SCI).

The nature of steel construction expands the

possibilities for architectural expression.
Opportunities arise through the use of features
such as shallow floor construction, storey high
glazing, columns within separating walls and
long-span internal structures. The versatility of
steel construction allows complex geometries
to be used that satisfy the architectural
concept and create landmark designs with
exposed steelwork and large, open spaces.

The need for safe and efficient buildings has

meant that steel systems have been subjected
to detailed research over many years to ensure
that the effects of fire on the material and
components is fully understood. The result
of this research is the ability to fire engineer
a steel structure to ensure that it meets the
legislative requirements at the minimum
cost, without compromising safety in some
circumstances without applied fire protection.
Fire protection is often on the critical path so
off-site application has significant benefits in
terms of increased speed of construction.

14

Index of tables
Dimensions and properties

Advance UK Beams

Advance UK Columns

Advance UK Bearing Piles

Advance UK Parallel Flange Channels

Shallow Floor Beams

Asymmetric Slimflor Beams (ASB)

Slimflor Beams (SFB)

Advance UK Angles

Equal

Unequal

Advance UK Tees

Split from Advance UK Beams

Split from Advance UK Columns
Detailing and fire

Advance UK Beams

Advance UK Columns

Advance UK Bearing Piles

Advance UK Parallel Flange Channels

Shallow Floor Beams

Asymmetric Slimflor Beams (ASB)

Advance UK Angles

Equal

Unequal

Advance UK Tees

Split from Advance UK Beams

Split from Advance UK Columns

Page 16
Page 20
Page 22
Page 24
Page 26
Page 28
Page 30
Page 32
Page 34
Page 38

Page 40
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 50

Note:
Advance sections are supplied with a Class C surface condition in accordance with BS EN 10163-3.
Class D surface condition can be supplied by agreement.

15

Dimensions and properties

Advance UK Beams

d
t
r

Designation Ratios for Second Radius of

Depth
local
moment of
gyration

Mass Depth of Width of Thickness Thickness Root
between buckling
area

per
section
section
of web of flange radius
fillets
Flange Web
Axis Axis
Axis Axis
Serial
metre
D
B
t
T
r
d
B/2T
d/t
x-x
y-y
x-x y-y

size
kg/m
mm mm mm mm mm mm cm4 cm4 cm cm
1016x305 487
486.7
1036.3
308.5 30.0 54.1 30.0 868.1 2.85
28.9
1021884
26721
40.6
6.57
437
437.0
1026.1
305.4 26.9 49.0 30.0 868.1 3.12
32.3 910322
23447
40.4
6.49
393
392.7
1015.9
303.0 24.4 43.9 30.0 868.1 3.45
35.6 807503
20496
40.2
6.40
349
349.4
1008.1
302.0 21.1 40.0 30.0 868.1 3.78
41.1 723131
18460
40.3
6.44
314
314.3
999.9
300.0 19.1 35.9 30.0 868.1 4.18
45.5 644063
16232
40.1
6.37
272
272.3
990.1
300.0 16.5 31.0 30.0 868.1 4.84
52.6 553974
14004
40.0
6.35
249
248.7
980.1
300.0 16.5 26.0 30.0 868.1 5.77
52.6 481192
11754
39.0
6.09
222
222.0
970.3
300.0 16.0 21.1 30.0 868.1 7.11
54.3 407961
9546
38.0
5.81
914x419
388
388.0
921.0
420.5 21.4 36.6 24.1 799.6 5.74
37.4 719635
45438
38.2
9.59
343
343.3
911.8
418.5 19.4 32.0 24.1 799.6 6.54
41.2 625780
39156
37.8
9.46
914x305
289
289.1
926.6
307.7 19.5 32.0 19.1 824.4 4.81
42.3 504187
15597
37.0
6.51
253
253.4
918.4
305.5 17.3 27.9 19.1 824.4 5.47
47.7 436305
13301
36.8
6.42
224
224.2
910.4
304.1 15.9 23.9 19.1 824.4 6.36
51.8 376414
11236
36.3
6.27
201
200.9
903.0
303.3 15.1 20.2 19.1 824.4 7.51
54.6 325254
9423
35.7
6.07
838x292
226
226.5
850.9
293.8 16.1 26.8 17.8 761.7 5.48
47.3 339704
11360
34.3
6.27
194
193.8
840.7
292.4 14.7 21.7 17.8 761.7 6.74
51.8 279175
9066
33.6
6.06
176
175.9
834.9
291.7 14.0 18.8 17.8 761.7 7.76
54.4 246021
7799
33.1
5.90
762x267
197
196.8
769.8
268.0 15.6 25.4 16.5 686.0 5.28
44.0 239957
8175
30.9
5.71
173
173.0
762.2
266.7 14.3 21.6 16.5 686.0 6.17
48.0 205282
6850
30.5
5.58
147
146.9
754.0
265.2 12.8 17.5 16.5 686.0 7.58
53.6 168502
5455
30.0
5.40
134
133.9
750.0
264.4 12.0 15.5 16.5 686.0 8.53
57.2 150692
4788
29.7
5.30
686x254
170
170.2
692.9
255.8 14.5 23.7 15.2 615.1 5.40
42.4 170326
6630
28.0
5.53
152
152.4
687.5
254.5 13.2 21.0 15.2 615.1 6.06
46.6 150355
5784
27.8
5.46
140
140.1
683.5
253.7 12.4 19.0 15.2 615.1 6.68
49.6 136267
5183
27.6
5.39
125
125.2
677.9
253.0 11.7 16.2 15.2 615.1 7.81
52.6 117992
4383
27.2
5.24
610x305
238
238.1
635.8
311.4 18.4 31.4 16.5 540.0 4.96
29.3 209471
15837
26.3
7.23
179
179.0
620.2
307.1 14.1 23.6 16.5 540.0 6.51
38.3 153024
11408
25.9
7.07
149
149.2
612.4
304.8 11.8 19.7 16.5 540.0 7.74
45.8 125876
9308
25.7
7.00
610x229
140
139.9
617.2
230.2 13.1 22.1 12.7 547.6 5.21
41.8 111777
4505
25.0
5.03
125
125.1
612.2
229.0 11.9 19.6 12.7 547.6 5.84
46.0 98610
3932
24.9
4.97
113
113.0
607.6
228.2 11.1 17.3 12.7 547.6 6.60
49.3 87318
3434
24.6
4.88
101
101.2
602.6
227.6 10.5 14.8 12.7 547.6 7.69
52.2 75780
2915
24.2
4.75
610x178
100
100.3
607.4
179.2 11.3 17.2 12.7 547.6 5.21
48.5 72528
1658
23.8
3.60
92 92.2
603.0
178.8 10.9 15.0 12.7 547.6 5.96
50.2 64577
1436
23.4
3.50
82 81.8
598.6
177.9 10.0 12.8 12.7 547.6 6.95
54.8 55869
1207
23.2
3.40
533x312
272
273.3
577.1
320.2 21.1 37.6 12.7 476.5 4.26
22.6 198578
20615
23.9
7.70
219
218.8
560.3
317.4 18.3 29.2 12.7 476.5 5.43
26.0 150976
15589
23.3
7.48
182
181.5
550.7
314.5 15.2 24.4 12.7 476.5 6.44
31.3 123222
12667
23.1
7.40
150
150.6
542.5
312.0 12.7 20.3 12.7 476.5 7.68
37.5 100633
10285
22.9
7.32
533x210
138
138.3
549.1
213.9 14.7 23.6 12.7 476.5 4.53
32.4 86088
3864
22.1
4.68
122
122.0
544.5
211.9 12.7 21.3 12.7 476.5 4.97
37.5 76043
3388
22.1
4.67
109
109.0
539.5
210.8 11.6 18.8 12.7 476.5 5.61
41.1 66822
2943
21.9
4.60
101
101.0
536.7
210.0 10.8 17.4 12.7 476.5 6.03
44.1 61519
2692
21.9
4.57
92 92.1
533.1
209.3 10.1 15.6 12.7 476.5 6.71
47.2 55227
2389
21.7
4.51
82
82.2
528.3
208.8 9.6 13.2
12.7 476.5 7.91
49.6 47539
2007
21.3
4.38
533x165
85 84.8
534.9
166.5 10.3 16.5 12.7 476.5 5.05
46.3 48631
1275
21.2
3.44
74
74.7
529.1
165.9 9.7 13.6
12.7 476.5 6.10
49.1 41058
1040
20.8
3.30
66
65.7
524.7
165.1 8.9 11.4
12.7 476.5 7.24
53.5 35028
859
20.5
3.20
Dimensions and properties to BS4-1.

These sizes are in addition to our standard range of BS4 sections.

* Sections in italics may become slender under axial compression.

16

UKB

Elastic Plastic
Buckling
Torsional
Warping
Torsional
Area of
I ndicative values
Designation
modulus modulus
parameter
index
constant
constant
section
for S355 steel

u
x
H
J Mcx
Pcy*

Axis Axis
Axis Axis for

x-x y-y
x-x y-y
Le=3.5m Serial
cm3 cm3 cm3 cm3 dm6 cm4 cm2 kNm kN
size
19722

1732

23208

2799

0.867

21.1

64.4

4299

620

7770

15700

487 1016x305

17743

1535

20769

2467

0.868

23.1

56.0

3185

557

6960

14600

437

15897

1353

18538

2167

0.868

25.5

48.4

2330

500

6210

13100

393

14346

1223

16593

1940

0.872

27.9

43.3

1718

445

5720

12300

349

12883

1082

14850

1712

0.872

30.7

37.7

1264

400

5120

10400 314

11190

934

12827

1469

0.873

35.0

32.2

835

347

4430

8640 272

9819

784

11350

1244

0.861

39.8

26.8

582

317

3920

7670 249

1019

0.850

45.7

21.5

283

3380

15627

8409

2161

17666

3340

0.885

26.7

88.9

1734

494

6090

15600

13726

1871

15478

2889

0.883

30.1

75.8

1193

437

5340

13200 343

10883

1014

12570

1601

0.867

31.9

31.2

926

368

4340

9810

10942

1370

0.866

36.2

26.4

626

323

3770

8240 253

9501

636

871

9808

390

6570 222
388 914x419
289 914x305

8269

739

9535

1163

0.861

41.3

22.1

422

286

3290

7020 224

7204

621

8352

982

0.854

46.8

18.4

291

256

2880

6050 201

7985

773

9155

1211

0.870

35.0

19.3

514

289

3160

7350

6641

620

7640

974

0.862

41.6

15.2

306

247

2640

5990 194

226 838x292

5893

535

6808

842

0.856

46.5

13.0

221

224

2350

5250 176

6234

610

7167

958

0.869

33.2

11.3

404

251

2470

6220

5387

514

6198

807

0.864

38.1

267

220

2140

5230 173

9.39

197 762x267

4470

411

5156

647

0.858

45.2

7.40

159

187

1780

4210 147

4018

362

4644

570

0.854

49.8

6.46

119

171

1650

3810 134

4916

518

5631

811

0.872

31.8

7.42

308

217

1940

5580

4374

455

5001

710

0.871

35.5

6.42

220

194

1730

4610 152

170 686x254

3987

409

4558

638

0.868

38.7

5.72

169

178

1570

4130 140

3481

346

3994

542

0.862

43.9

4.80

116

159

1380

3550 125

6589

1017

7486

1574

0.886

21.3

14.5

785

303

2580

8890

238 610x305

4935

743

5548

1144

0.886

27.7

10.2

340

228

1910

6640

179

4111

611

4594

937

0.886

32.7

8.17

200

190

1580

5180 149

3622

391

4142

611

0.875

30.6

3.99

216

178

1430

4250

140 610x229

3221

343

3676

535

0.873

34.1

3.45

154

159

1270

3650

125

111

2874

301

3281

469

0.870

38.0

2.99

2515

256

2881

400

0.864

43.1

2.52

77.0

144

1130

3120 113

129

1020

2740 101

2388

185

2786

296

0.855

38.7

1.44

95.0

128

961

2060

2142

161

2511

258

0.848

42.8

1.24

71.0

117

891

1820

1867

136

2194

218

0.843

48.5

1.04

48.8

104

779

1550

6882

1288

7859

1985

0.890

15.9

15.0

1288

348

2710

10400

11.0

100 610x178
92
82
272 533x312

5389

982

6109

1514

0.884

19.8

642

279

2110

8280

219

4475

806

5030

1237

0.885

23.4

8.77

373

231

1740

6830

182

3710

659

4142

1009

0.885

27.8

7.01

216

192

1430

5660

150

3136

361

3613

568

0.873

25.0

2.67

250

176

1250

3930

138 533x210

2793

320

3196

500

0.877

27.6

2.32

178

155

1100

3460

122

2477

279

2829

436

0.875

30.9

1.99

126

139

976

3050

109

2292

256

2612

399

0.874

33.2

1.81

101

129

901

2810

101

2072

228

2360

355

0.872

36.5

1.60

75.7

117

838

2560

92

1800

192

2059

300

0.864

41.6

1.33

51.5

105

731

2100

82

1818

153

2107

243

0.862

35.5

0.857

73.8

108

726

1620

85 533x165

1552

125

1808

200

0.853

41.1

0.691

47.9

95.2

642

1350

74

1335

104

1561

166

0.847

47.0

0.566

32.0

83.7

554

1130

66

17

Dimensions and properties

Advance UK Beams

d
t
r

Designation Ratios for Second Radius of

Depth
local
moment of
gyration

Mass Depth of Width of Thickness Thickness Root
between buckling
area

per
section
section
of web of flange radius
fillets
Flange Web
Axis Axis
Axis Axis
Serial
metre
D
B
t
T
r
d
B/2T
d/t
x-x
y-y
x-x y-y

size
kg/m
mm mm mm mm mm mm cm4 cm4 cm cm
457x191 161
161.4
492.0
199.4 18.0 32.0 10.2 407.6 3.12 22.6 79779 4250
19.7 4.55

133
133.3
480.6
196.7 15.3 26.3 10.2 407.6 3.74 26.6 63841 3350
19.4 4.44

106
105.8
469.2
194.0 12.6 20.6 10.2 407.6 4.71 32.3 48873 2515
19.0 4.32

98
98.3
467.2
192.8 11.4 19.6 10.2 407.6 4.92 35.8 45727 2347
19.1 4.33

89
89.3
463.4
191.9 10.5 17.7 10.2 407.6 5.42 38.8 41015 2089
19.0 4.29

82
82.0
460.0
191.3 9.9 16.0 10.2 407.6 5.98 41.2 37051 1871
18.8 4.23

74
74.3
457.0
190.4 9.0 14.5 10.2 407.6 6.57 45.3 33319 1671
18.8 4.20

67
67.1
453.4
189.9 8.5 12.7 10.2 407.6 7.48 48.0 29380 1452
18.5 4.12
457x152
82
82.1
465.8
155.3 10.5 18.9 10.2 407.6 4.11 38.8 36589 1185
18.7 3.37

74
74.2
462.0
154.4 9.6 17.0 10.2 407.6 4.54 42.5 32674 1047
18.6 3.33
67
67.2
458.0
153.8 9.0 15.0 10.2 407.6 5.13 45.3 28927 913
18.4 3.27

60
59.8
454.6
152.9 8.1 13.3 10.2 407.6 5.75 50.3 25500 795
18.3 3.23

52
52.3
449.8
152.4 7.6 10.9 10.2 407.6 6.99 53.6 21369 645
17.9 3.11
406x178
85
85.3
417.2
181.9 10.9 18.2 10.2 360.4 5.00 33.1 31703 1830
17.1 4.11

74
74.2
412.8
179.5 9.5 16.0 10.2 360.4 5.61 37.9 27310 1545
17.0 4.04

67
67.1
409.4
178.8 8.8 14.3 10.2 360.4 6.25 41.0 24331 1365
16.9 3.99

60
60.1
406.4
177.9 7.9 12.8 10.2 360.4 6.95 45.6 21596 1203
16.8 3.97

54
54.1
402.6
177.7 7.7 10.9 10.2 360.4 8.15 46.8 18722 1021
16.5 3.85
406x140
53
53.3
406.6
143.3 7.9 12.9 10.2 360.4 5.55 45.6 18283 635
16.4 3.06

46
46.0
403.2
142.2 6.8 11.2 10.2 360.4 6.35 53.0 15685 538
16.4 3.03
39
39.0
398.0
141.8 6.4 8.6 10.2 360.4 8.24 56.3 12508 410
15.9 2.87
356x171
67
67.1
363.4
173.2 9.1 15.7 10.2 311.6 5.52 34.2 19463 1362
15.1 3.99

57
57.0
358.0
172.2 8.1 13.0 10.2 311.6 6.62 38.5 16038 1108
14.9 3.91

51
51.0
355.0
171.5 7.4 11.5 10.2 311.6 7.46 42.1 14136 968
14.8 3.86

45
45.0
351.4
171.1 7.0 9.7 10.2 311.6 8.82 44.5 12066 811
14.5 3.76
356x127
39
39.1
353.4
126.0 6.6 10.7 10.2 311.6 5.89 47.2 10172 358
14.3 2.68

33
33.1
349.0
125.4 6.0 8.5 10.2 311.6 7.38 51.9 8249 280
14.0 2.58
305x165
54
54.0
310.4
166.9 7.9 13.7 8.9 265.2 6.09 33.6 11696 1063
13.0 3.93

46
46.1
306.6
165.7 6.7 11.8 8.9 265.2 7.02 39.6 9899 896
13.0 3.90

40
40.3
303.4
165.0 6.0 10.2 8.9 265.2 8.09 44.2 8503 764
12.9 3.86
305x127
48
48.1
311.0
125.3 9.0 14.0 8.9 265.2 4.48 29.5 9575 461
12.5 2.74

42
41.9
307.2
124.3 8.0 12.1 8.9 265.2 5.14 33.2 8196 389
12.4 2.70

37
37.0
304.4
123.4 7.1 10.7 8.9 265.2 5.77 37.4 7171 336
12.3 2.67
305x102
33
32.8
312.7
102.4 6.6 10.8 7.6 275.9 4.74 41.8 6501 194
12.5 2.15

28
28.2
308.7
101.8 6.0 8.8 7.6 275.9 5.78 46.0 5366 155
12.2 2.08

25
24.8
305.1
101.6 5.8 7.0 7.6 275.9 7.26 47.6 4455 123
11.9 1.97
254x146
43
43.0
259.6
147.3 7.2 12.7 7.6 219.0 5.80 30.4 6544 677
10.9 3.52

37
37.0
256.0
146.4 6.3 10.9 7.6 219.0 6.72 34.8 5537 571
10.8 3.48

31
31.1
251.4
146.1 6.0 8.6 7.6 219.0 8.49 36.5 4413 448
10.5 3.36
254x102
28
28.3
260.4
102.2 6.3 10.0 7.6 225.2 5.11 35.7 4005 179
10.5 2.22

25
25.2
257.2
101.9 6.0 8.4 7.6 225.2 6.07 37.5 3415 149
10.3 2.15

22
22.0
254.0
101.6 5.7 6.8 7.6 225.2 7.47 39.5 2841 119
10.1 2.06
203x133
30
30.0
206.8
133.9 6.4 9.6 7.6 172.4 6.97 26.9 2896 385
8.71
3.17

25
25.1
203.2
133.2 5.7 7.8 7.6 172.4 8.54 30.2 2340 308
8.56
3.10
203x102
23
23.1
203.2
101.8 5.4 9.3 7.6 169.4 5.47 31.4 2105 164
8.46
2.36
178x102
19
19.0
177.8
101.2 4.8 7.9 7.6 146.8 6.41 30.6 1356 137
7.48
2.37
152x89
16
16.0
152.4 88.7 4.5 7.7 7.6 121.8 5.76 27.1 834 90
6.41
2.10
127x76
13
13.0
127.0
76.0 4.0 7.6 7.6 96.6 5.00 24.2 473 56
5.35
1.84
Dimensions and properties to BS4-1.

18

These sizes are in addition to our standard range of BS4 sections.

UKB

Elastic Plastic
Buckling
Torsional
Warping
Torsional
Area of
I ndicative values
Designation
modulus modulus
parameter
index
constant
constant
section
for S355 steel

u
x
H
J Mcx
Pcy

Axis Axis
Axis Axis for

x-x y-y
x-x y-y
Le=3.5m Serial
cm3 cm3 cm3 cm3 dm6 cm4 cm2 kNm kN
size
3243

426

3778

672

0.882

16.4

2.25

515

206

1300

4470

161 457x191

2657

341

3070

535

0.880

19.6

1.73

292

170

1060

3590

133

2083

259

2389

405

0.877

24.4

1.27

146

135

824

2760

106

1957

243

2232

379

0.881

25.7

1.18

121

125

770

2570

98

1770

218

2014

338

0.880

28.3

1.04

90.7

114

695

2320

89

1611

196

1831

304

0.877

30.9

0.922

69.2

104

650

2110

82

1458

176

1653

272

0.877

33.9

0.818

51.8

94.6

587

1900

74

1296

153

1471

237

0.872

37.9

0.705

37.1

85.5

522

1680

67

1571

153

1812

240

0.873

27.4

0.591

89.2

625

1530

82 457x152

1414

136

1627

213

0.873

30.1

0.518

65.9

94.5

561

1350

74

1263

119

1453

187

0.869

33.6

0.448

47.7

85.6

516

1200

67

1122

104

1287

163

0.868

37.5

0.387

33.8

76.2

457

1040

60

105

950 85 1096 133 0.859 43.9 0.311 21.4 66.6
389 857
52
1520

201

1733

313

0.881

24.4

0.728

93.0

598

2100

85 406x178

1323

172

1501

267

0.882

27.6

0.608

62.8

109
94.5

533

1800

74

1189

153

1346

237

0.880

30.5

0.533

46.1

85.5

478

1610

67

1063

135

1200

209

0.880

33.8

0.466

33.3

76.5

426

1430

60

930

115

1055

178

0.871

38.3

0.392

23.1

69.0

375

1230

54

899 89 1031 139 0.870 34.1 0.246 29.0 67.9
366 851
53
406x140

778 76
629

58

888 118 0.871 38.9 0.207 19.0 58.6

315 722
46
0.858

47.5

0.155

10.7

49.7

257

1071

157

1211

724

243

91

0.886

24.4

0.412

55.7

85.5

430

1610

559

39
67 356x171

896

129

1010

199

0.882

28.8

0.330

33.4

72.6

359

1330

57

796

113

896

174

0.881

32.1

0.286

23.8

64.9

318

1160

51

687 95

775 147 0.874 36.8 0.237 15.8 57.3

275 991
45

576

57

659

89

0.871

35.2

0.105

473

45

543

70

0.863

42.2

0.0812

754

127

846

196

0.889

23.6

0.234

646

108

720

166

0.891

27.1

0.195

560 93

15.1

49.8

234

497

39 356x127

42.1

193

393

33

34.8

68.8

300

1270

54 305x165

22.2

58.7

256

1070

46

8.79

623 142 0.889 31.0 0.164 14.7 51.3

221 921
40

616 74

711 116 0.873 23.3 0.102 31.8 61.2

252 635
48
305x127

534

63

614

98

0.872

26.5

0.0846

21.1

53.4

218

540

42

471

54

539

85

0.872

29.7

0.0725

14.8

47.2

191

468

37

416

38

481

60

0.866

31.6

0.0442

12.2

41.8

171

281

33 305x102

348

31

403

48

0.859

37.4

0.0349

7.40

35.9

143

227

28

292

24

342

39

0.846

43.4

0.0273

4.77

31.6

121

180

25

504 92

566 141 0.891 21.2 0.103 23.9 54.8

201 859
43
254x146

433 78

483 119 0.890 24.3 0.0857 15.3 47.2

171 727
37

351

61

393

94

0.880

29.6

0.0660

8.55

39.7

140

579

31

308

35

353

55

0.874

27.5

0.0280

9.57

36.1

125

257

28 254x102

266

29

306

46

0.866

31.5

0.0230

6.42

32.0

109

215

25

224

23

259

37

0.856

36.4

0.0182

4.15

28.0

174

22

280

57

314

88

0.881

21.5

0.0374

508

30 203x133

230

46

258

71

0.877

25.6

0.0294

5.96

32.0

91.6

410

25

207

32

234

50

0.888

22.5

0.0154

7.02

29.4

83.1

234

23 203x102

153

27

171

42

0.888

22.6

0.0099

4.41

24.3

60.7

195

19 178x102

109

20

123

31

0.890

19.6

0.0047

3.56

20.3

43.7

131

16 152x89

75

15

84

23

0.895

16.3

0.0020

2.85

16.5

29.8

10.3

38.2

91.9
111

82.9

13 127x76

19

Dimensions and properties

r

Advance UK Columns

Designation Ratios for Second Radius of

Depth
local
moment of
gyration

Mass Depth of Width of Thickness Thickness Root
between buckling
area

per
section
section
of web of flange radius
fillets
Flange Web
Axis Axis
Axis Axis
Serial
metre
D
B
t
T
r
d
B/2T
d/t
x-x
y-y
x-x y-y

size
kg/m
mm mm mm mm mm mm cm4 cm4 cm cm
356x406 634 633.9 474.6 424.0

47.6

77.0

15.2

290.2

2.75

6.10 274845 98125 18.4 11.0

551 551.0 455.6 418.5

42.1

67.5

15.2

290.2

3.10

6.89 226938 82671 18.0 10.9

467 467.0 436.6 412.2

35.8

58.0

15.2

290.2

3.55

8.11 183003 67834 17.5 10.7

393 393.0 419.0 407.0

30.6

49.2

15.2

290.2

4.14

9.48 146618 55367 17.1 10.5

340 339.9 406.4 403.0

26.6

42.9

15.2

290.2

4.70

10.9 122543 46853 16.8 10.4

287 287.1 393.6 399.0

22.6

36.5

15.2

290.2

5.47

12.8

99875 38677 16.5 10.3

235 235.1 381.0 394.8

18.4

30.2

15.2

290.2

6.54

15.8

79085 30993 16.3 10.2

356x368 202 201.9 374.6

16.5

27.0

15.2

290.2

6.94

17.6

66261

177 177.0 368.2 372.6

14.4

23.8

15.2

290.2

7.83

20.2

57118 20529 15.9 9.54

153 152.9 362.0 370.5

12.3

20.7

15.2

290.2

8.95

23.6

48589 17553 15.8 9.49

374.7

23688 16.1

9.60

129
129.0
355.6 368.6 10.4 17.5 15.2 290.2 10.5 27.9 40246 14611
15.6 9.43
305x305 283 282.9 365.3

26.8

44.1

15.2

246.7

3.65

9.21

240 240.0 352.5 318.4

23.0

37.7

15.2

246.7

4.22

10.7

64203 20315 14.5 8.15

198 198.1 339.9 314.5

19.1

31.4

15.2

246.7

5.01

12.9

50904 16299 14.2 8.04

158 158.1 327.1 311.2

15.8

25.0

15.2

246.7

6.22

15.6

38747 12569 13.9 7.90

137 136.9 320.5 309.2

13.8

21.7

15.2

246.7

7.12

17.9

32814 10700 13.7 7.83

118 117.9 314.5 307.4

12.0

18.7

15.2

246.7

8.22

20.6

27672

9059 13.6 7.77

97 96.9 307.9 305.3

9.9

15.4

15.2

246.7

9.91

24.9

22249

7308 13.4 7.69

19.2

31.7

12.7

200.3

4.18

10.4

29998

9870 11.9

132 132.0 276.3 261.3

15.3

25.3

12.7

200.3

5.16

13.1

22529

7531 11.6 6.69

107 107.1 266.7 258.8

12.8

20.5

12.7

200.3

6.31

15.6

17510

5928 11.3 6.59

89 88.9 260.3 256.3

10.3

17.3

12.7

200.3

7.41

19.4

14268

4857 11.2 6.55

73 73.1 254.1 254.6

8.6

14.2

12.7

200.3

8.96

23.3

11407

3908 11.1 6.48

18.1

30.1

10.2

160.8

3.55

8.88

15437

4920

113 113.5 235.0 212.1

16.3

26.9 10.2

160.8

3.94

9.87 13301 4285 9.59 5.45

100 99.6 228.6 210.3

14.5

23.7 10.2

160.8

4.44 11.1

11298 3679 9.44 5.39

86 86.1 222.2 209.1

12.7

20.5 10.2

160.8

5.10 12.7

9449 3127 9.28 5.34

71 71.0 215.8 206.4

10.0

17.3 10.2

160.8

5.97 16.1

7618 2537 9.18 5.30

60 60.0 209.6 205.8

9.4

14.2 10.2

160.8

7.25 17.1

6125 2065 8.96 5.20

52 52.0 206.2 204.3

7.9

12.5 10.2

160.8

8.17 20.4

5259 1778 8.91 5.18

46 46.1 203.2 203.6

7.2

11.0 10.2

160.8

9.25 22.3

4568 1548 8.82 5.13

254x254 167 167.1 289.1

203x203 127 127.5 241.4

322.2

265.2

213.9

78872

24635 14.8

8.27

6.81

9.75 5.50

152x152
51
51.2
170.2
157.4 11.0 15.7 7.6 123.6 5.01
11.2 3227 1022
7.04
3.96

44
44.0
166.0
155.9 9.5 13.6 7.6 123.6 5.73
13.0 2703 860
6.94
3.92

37
37.0
161.8
154.4 8.0 11.5 7.6 123.6 6.71
15.5 2210 706
6.85
3.87

30
30.0
157.6
152.9 6.5 9.4 7.6 123.6 8.13
19.0 1748 560
6.76
3.83
23 23.0 152.4 152.2

5.8

Dimensions and properties to BS4-1.

These sizes are in addition to our standard range of BS4 sections.

* Capacities in italics are governed by 1.2 x Zx x py.

20

6.8

7.6

123.6 11.2

21.3

1250

400 6.54 3.70

UKC

Elastic Plastic
Buckling
Torsional
Warping
Torsional
Area of
I ndicative values
Designation
modulus modulus
parameter
index
constant
constant
section
for S355 steel

u
x
H
J Mcx*
Pcy

Axis Axis
Axis Axis for

x-x y-y
x-x y-y
Le=3.5m Serial
cm3 cm3 cm3 cm3 dm6 cm4 cm2 kNm kN
size
11582

4629

14235

7108

0.843

5.46

38.8

808

4520

9962

3951

12076

6058

0.841

6.05

31.1

13720
9240

702

3890 19800 551

22800

634 356x406

8383

3291

10003

5034

0.839

6.86

24.3

5809

595

3350

17200

467

6998

2721

8223

4154

0.837

7.86

18.9

3545

501

2750

14700

393

6031

2325

6999

3544

0.836

8.85

15.5

2343

433

2340

12700

340

5075

1939

5813

2949

0.835

10.2

12.3

1441

366

2010

11200

287

4151

1570

4687

2383

0.834

12.1

9.54

812

299

1620

9150

235

3538

1264

3972

1919

0.844

13.4

7.16

558

257

1370

7740

202 356x368

3103

1102

3455

1671

0.844

15.0

6.09

381

226

1190

6800

177

2684

948

2965

1435

0.844

17.0

5.11

251

195

1020

5860

153

2264

793

2479

1199

0.844

19.9

4.18

153

164

821

4920

129

4318

1529

5105

2342

0.855

7.65

6.35

2034

360

1710

9760

283 305x305

3643

1276

4247

1950

0.854

8.74

5.03

1271

306

1470

8760

240

2995

1037

3440

1581

0.854

10.2

3.88

734

252

1190

7180

198

2369

808

2681

1230

0.851

12.5

2.87

378

201

925

5690

158

2048

692

2297

1052

0.851

14.2

2.39

249

174

792

4900

137

1760 589 1958 895 0.850 16.2

1.98 161 150

675 4220
118

1445

479

1592

726

0.850

1.56

2075

744

2424

1137

0.851

19.3
8.49

1.63

91.2
626

123

548

3530

213

836

5640

97
167 254x254

1631 576 1869 878 0.850 10.3

1.19 319 168

645 4410
132

1313 458 1485 697 0.848 12.4

0.898 172 136

512 3540
107

1096 379 1224 575 0.850 14.5

0.717 102 113

422 2930
89

898

0.562

307

992

465

0.849

17.3

57.6

93.1

350

2460

73

1279 460 1517 704 0.854 7.38 0.549 427 162
523 3740
127
203x203

1132 404 1329 618 0.853 8.11 0.464 305 145
459 3320
113

988 350 1148 534 0.852 9.02 0.386 210 127
396 2890
100

850 299

977 456 0.850 10.2

0.318 137 110

337 2480
86

706

246

799

374

0.853

11.9

0.250

80.2

90.4

276

2030

71

584

201

656

305

0.846

14.1

0.197

47.2

76.4

233

1720

60

510

174

567

264

0.848

15.8

0.167

31.8

66.3

201

1490

52

450

152

497

231

0.847

17.7

0.143

22.2

58.7

174

1300

46

379

130

438

199

0.848

10.1

0.0610

48.8

65.2

155

1090

51 152x152

326

110

372

169

0.848

11.5

0.0499

31.7

56.1

132

922

44

273

91

309

140

0.848

13.3

0.0399

19.2

47.1

110

761

37

222

73

248

112

0.849

16.0

0.0308

10.5

38.3

87.9

611

30

164

53

182

80

0.840

20.7

0.0212

29.2

60.5

444

23

4.63

21

Dimensions and properties

r

Advance UK Bearing Piles

Designation Ratios for Second Radius of

Depth
local
moment of
gyration

Mass Depth of Width of Thickness Thickness Root
between buckling
area

per
section
section
of web of flange radius
fillets
Flange Web
Axis Axis
Axis Axis
Serial
metre
D
B
t
T
r
d
B/2T
d/t
x-x
y-y
x-x y-y

size
kg/m
mm mm mm mm mm mm cm4 cm4 cm cm
356x368 174 173.9 361.4

378.5

20.3

20.4

15.2

290.2

9.28

14.3

51009

18463 15.2

9.13

152
152.0
356.4 376.0 17.8 17.9 15.2 290.2 10.5 16.3 43972 15877
15.1 9.05

133
133.0
352.0 373.8 15.6 15.7 15.2 290.2 11.9 18.6 37983 13680
15.0 8.99

109
108.9
346.4 371.0 12.8 12.9 15.2 290.2 14.4 22.7 30632 10987
14.9 8.90
305x305 223 222.9 337.9

325.7

186 186.0 328.3 320.9

30.3

30.4

15.2

246.7

5.36

8.14

25.5

25.6

15.2

246.7

6.27

9.67 42610 14143 13.4 7.73

52699

17577 13.6

7.87

149 149.1 318.5 316.0

20.6

20.7

15.2

246.7

7.63

12.0 33067 10910 13.2 7.58

126 126.1 312.3 312.9

17.5

17.6

15.2

246.7

8.89

14.1 27408

9002 13.1 7.49

110
110.0
307.9 310.7 15.3 15.4 15.2 246.7 10.1 16.1 23563 7709
13.0 7.42
95 94.9
303.7 308.7 13.3 13.3 15.2 246.7 11.6 18.5 20045 6529
12.9 7.35
88 88.0
301.7 307.8 12.4 12.3 15.2 246.7 12.5 19.9 18425 5984
12.8 7.31
79 78.9
299.3 306.4 11.0 11.1 15.2 246.7 13.8 22.4 16444 5326
12.8 7.28
254x254 85 85.1 254.3 260.4

14.4

14.3

12.7

200.3

9.10

13.9

12284

4215 10.6 6.24

71 71.0
249.7 258.0 12.0 12.0 12.7 200.3 10.8 16.7 10071 3439
10.6 6.17
63 63.0
247.1 256.6 10.6 10.7 12.7 200.3 12.0 18.9 8860 3016
10.5 6.13
203x203 54 53.9 204.0 207.7

11.3

11.4

10.2

160.8

9.11

14.2

5027

1705 8.55 4.98

45 44.9
200.2 205.9 9.5 9.5 10.2 160.8 10.8 16.9 4100 1384
8.46
4.92
Dimensions and properties to BS4-1.
* Sections in italics may become slender under axial compression.

22

UKBP

Elastic Plastic
Buckling
Torsional
Warping
Torsional
Area of
Indicative Pcy*
Designation
modulus modulus
parameter
index
constant
constant
section
values for

u
x
H
J
S355 steel

Axis Axis
Axis Axis
for

x-x y-y
x-x y-y
Le=3.5m Serial
cm3 cm3 cm3 cm3 dm6 cm4 cm2 kN
size

2823
976 3186
1497
0.821 15.8 5.37 330 221

6555 174
356x368

2468
845 2767
1293
0.821 17.8 4.55 223 194

5740 152

2158
732 2406
1118
0.822 20.1 3.87 151 169

5125 133

1769

592

1956

903

0.823

24.2

3.05

84.6

139

4000 109

3119
1079 3653
1680
0.826 9.55
4.15 943 284

8005 223
305x305

2596
881 3003
1366
0.827 11.1 3.24 560 237

6630 186

2076
691 2370
1065
0.828 13.5 2.42 295 190

5275 149

1755
575 1986
885
0.829 15.7 1.95 182 161

4450 126

1531
496 1720
762
0.830 17.7 1.65 122 140

3950 110

1320

423

1475

648

0.830

20.2

1.38

80.0

121

3400

95

1221

389

1361

595

0.830

21.6

1.25

64.2

112

3135

88

1099

348

1218

531

0.832

23.9

1.11

46.9

100

2735 79

108

966

324

1092

498

0.825

15.6

0.607

81.8

2780

85 254x254

807

267

904

409

0.826

18.4

0.486

48.4

90.4

2310

71

717

235

799

360

0.827

20.5

0.421

34.3

80.2

2040

63

493

164

557

252

0.827

15.8

0.158

32.7

68.7

1490

54 203x203

410

134

459

206

0.827

18.6

0.126

19.2

57.2

1225

45

23

Dimensions and properties

r

Advance UK
Parallel Flange Channels

Designation
Ratios for
Second

Depth
local moment of

Mass
Depth of Width of Thickness Thickness Distance
Root
between buckling area

per
section
section
of web
of flange
of
radius
fillets
Flange
Web
Axis Axis
Serial
metre
D
B
t
T
Cy
r
d
B/T
d/t
x-x y-y
size kg/m
mm
mm
mm
mm
cm
mm
mm
cm4 cm4
430x100

64

64.4

430

100

11.0

19.0

2.62

15

362

5.26

32.9

21939

722

380x100

54

54.0

380

100

9.5

17.5

2.79

15

315

5.71

33.2

15034

643

300x100

46

45.5

300

100

9.0

16.5

3.05

15

237

6.06

26.3

8229

568

300x90

41

41.4

300

90

9.0

15.5

2.60

12

245

5.81

27.2

7218

404

260x90

35

34.8

260

90

8.0

14.0

2.74

12

208

6.43

26.0

4728

353

260x75

28

27.6

260

75

7.0

12.0

2.10

12

212

6.25

30.3

3619

185

230x90

32

32.2

230

90

7.5

14.0

2.92

12

178

6.43

23.7

3518

334

230x75

26

25.7

230

75

6.5

12.5

2.30

12

181

6.00

27.8

2748

181

200x90

30

29.7

200

90

7.0

14.0

3.12

12

148

6.43

21.1

2523

314

200x75

23

23.4

200

75

6.0

12.5

2.48

12

151

6.00

25.2

1963

170

180x90

26

26.1

180

90

6.5

12.5

3.17

12

131

7.20

20.2

1817

277

180x75

20

20.3

180

75

6.0

10.5

2.41

12

135

7.14

22.5

1370

146

150x90

24

23.9

150

90

6.5

12.0

3.30

12

102

7.50

15.7

1162

253

150x75

18

17.9

150

75

5.5

10.0

2.58

12

106

7.50

19.3

861

131

125x65

15

14.8

125

65

5.5

9.5

2.25

12

82

6.84

14.9

483

80.0

100x50

10

10.2

100

50

5.0

8.5

1.73

65

5.88

13.0

208

32.3

Dimensions and properties to BS4-1.

24

y
Cy

UKPFC

Radius of Elastic Plastic

Buckling
Torsional
Warping
Torsional Area of
I ndicative values Designation
gyration modulus modulus
parameter
index
constant
constant section
f or S355 steel

u
x
H
J Mcx
Pcy

Axis Axis Axis Axis Axis Axis for

x-x
y-y
x-x
y-y
x-x
y-y
Le=3.5m
Serial
cm cm
cm3 cm3 cm3 cm3 dm6 cm4 cm2 kNm kN size
16.3

2.97

1020

97.9

1222

176

0.917

22.5

0.219

63.0

82.1

422

888

64

14.8

3.06

791

89.2

933

161

0.932

21.2

0.150

45.7

68.7

322

779

54

380x100

11.9

3.13

549

81.7

641

148

0.944

17.0

0.0813

36.8

58.0

221

681

46

300x100
300x90

430x100

11.7

2.77

481

63.1

568

114

0.934

18.4

0.0581

28.8

52.7

202

513

41

10.3

2.82

364

56.3

425

102

0.942

17.2

0.0379

20.6

44.4

151

445

35

260x90

10.1

2.30

278

34.4

328

0.932

20.5

0.0203

11.7

35.1

116

249

28

260x75

126

62.0

9.27

2.86

306

55.0

355

99.2

0.950

15.1

0.0279

19.3

41.0

9.17

2.35

239

34.8

278

63.2

0.947

17.3

0.0153

11.8

32.7

8.16

2.88

252

53.4

291

94.6

0.954

12.9

0.0197

18.3

37.9

8.11

2.39

196

33.8

227

60.8

0.956

14.8

0.0107

11.1

29.9

13.3

7.40

2.89

202

47.4

232

83.5

0.949

12.8

0.0141

7.27

2.38

152

28.8

176

52.0

0.946

15.3

0.0075

6.18

2.89

155

44.4

179

77.0

0.936

10.8

0.0089

6.15

2.40

115

26.6

132

47.3

0.946

13.1

0.0047

7.34
11.8
6.10

98.7
103
80.6

421

32

230x90

241

26

230x75

394

30

200x90

227

23

200x75

33.2

82.4

347

26

180x90

25.9

62.5

195

20

180x75

30.4

63.5

317

24

150x90

22.8

46.9

174

18

150x75

5.07
2.06 77.3
18.8 89.9 33.5 0.942 11.1 0.0019 4.72 18.8 31.9 110
15
125x65

4.00
1.58 41.5 9.9 48.9 17.6 0.942 10.0 0.0005 2.53 13.0 17.4 46.7
10
100x50

25

Bt
y

Dimensions and properties

r

Asymmetric
Slimflor Beams

t
d

D
x

y
Bb

Designation
Ratios for
Elastic
Second

Depth
Width Width of
Depth local buckling
neutral moment of

Mass
of
of top bottom Thickness Thickness
Root between
axis area

per
section flange
flange
of web of flange radius
fillets
Top Bottom Web position
Axis Axis
Serial
metre
D Bt Bb
t
T
r
d
flange flange
ye
x-x y-y

size kg/m mm mm mm mm mm mm mm Bt/2T Bb/2T d/t cm
cm4 cm4
300ASB 249* 249.2 342

203

313

40

40

27

208

196 195.5 342

183

293

20

40

27

208 2.29 3.66 10.4

2.54 3.91 5.20 19.2 52920 13194

185* 184.6 320

195

305

32

29

27

208

155 155.4 326

179

289

16

32

27

208 2.80 4.52 13.0

153* 152.8 310

190

300

27

24

27

208

3.96 6.25 7.70 17.4 28398 6840

280ASB 136* 136.4 288

190

300

25

22

24

196

4.32 6.82 7.84 16.3 22216 6256

124 123.9 296

178

288

13

26

24

196 3.42 5.54 15.1

17.2 23453 6410

105 104.7 288

176

286

11

22

24

196 4.00 6.50 17.8

16.8 19249 5298

100* 100.3 276

184

294

19

16

24

196

5.75 9.19 10.3

15.6 15506 4245

74 73.6 272

175

285

10

14

24

196

6.25 10.2 19.6

15.7 12191

19.8 45871 10463

3.36 5.26 6.50 18.0 35657 8752

18.9 34514 7989

For further information see the Slimdek Engineered flooring solution brochure or refer to the contact details on page 59. Free design software is available.
The elastic and plastic neutral axis positions are measured from the upper surface of the beam.
*These sections have been specially developed with thicker webs for improved performance in fire.

26

3334

ASB

ye y
p
x

Elastic NA
Plastic NA

Elastic modulus Radius of

Plastic Plastic
Buckling
Torsional
Warping
Torsional
Area of
Designation

gyration neutral axis modulus
parameter
index
constant
constant
section

Axis Axis Axis position
u
x
H
J

x-x
x-x
y-y
Axis
Axis
Axis
Axis
top bottom
x-x y-y
yp
x-x
y-y
Serial
cm3 cm3 cm3 cm cm cm
cm3 cm3 dm6 cm4 cm2 size
3761

1512

0.825

6.80

2.00

2004

317

2321 3185 714 13.6

2757

3528

843

12.9

6.48 28.1

3055

1229

0.845

7.86

1.50

1177

249 196

1984 2547 574

6.10

2658

1030

235 185*

12.3

6.45

22.6
21.0

249*

300ASB

0.822

8.56

1.20

871

1825 2519 553 13.2

6.35 27.3

2361

949

0.843

9.40

1.07

620

198 155

1628 2088 456 12.1

5.93 20.4

2160

816

0.822

9.97

0.895

513

195 153*

1367

1777

417

11.3

6.00

19.2

1806

740

0.814

10.2

0.710

379

174

136*

1360

1891

445

12.2

6.37

25.8

1730

761

0.832

10.5

0.721

332

158

124

1145

1604

370

12.0

6.30

25.4

1441

632

0.831

12.1

0.574

207

133

105

995

1292

289

11.0

5.76

18.4

1295

510

0.815

13.1

0.451

160

128

100*

776

1060

234

11.4

5.96

21.3

979

402

0.830

16.6

0.338

72.2

93.7

280ASB

74

27

Dimensions and properties

Slimflor Beams

Dp

X
Tp

bp

bp

Bp

Base section

Thickness
Width of
Mass per
Depth of
Width of
Area of
Elastic Second moment

Mass
of plate
outstand
metre of
compound
compound
compound
neutral axis of area
per
compound section
section
section
position Axis Axis
Serial metre
Tp bp section Dp Bp ye
x-x y-y
size kg/m
mm
mm
kg/m
mm
mm
cm2 cm cm4 cm4
356x406

634 15

100

707.4

490

624

901.1

22.7 325128 128496

551 15

100

623.8

471

619

794.7

21.5 272325 112246

467 15

100

539.1

452

612

686.7

20.3 223580 96514

393 15

100

464.4

434

607

591.6

19.1 182911 83323

340 15

100

410.9

421

603

523.5

18.2 155777 74260

287 15

100

357.6

409

599

455.6

17.2 129997 65543

235 15

100

305.1

396

595

388.7

16.0 106050 57297

356x368

202

100

269.6

390

575

343.4

15.3

177 15

100

244.4

383

573

311.4

14.6 79968 43997

153 15

100

220.1

377

571

280.4

13.8 69732 40763

129 15

100

196.0

371

569

249.6

12.9 59541 37590

305x305

283

100

344.4

380

522

438.8

16.4

240 15

100

301.1

368

518

383.5

15.4 85149 37729

198 15

100

258.7

355

515

329.6

14.3 69530 33323

158 15

100

218.3

342

511

278.0

13.1 55009 29268

137 15

100

196.9

336

509

250.8

12.4 47776 27203

118 15

100

177.7

330

507

226.3

11.7 41397 25388

97 15

100

156.4

323

505

199.2

10.8 34504 23435

254x254

167

100

221.9

304

465

282.6

12.2

132 15

100

186.3

291

461

237.3

11.1 32941 19802

107 15

100

161.1

282

459

205.2

10.1 26597 18000

89 15

100

142.7

275

456

181.8

9.33 22366 16733

73 15

100

126.6

269

455

161.3

203x203

127

100

176.3

256

414

224.5

113 15

100

162.0

250

412

206.4

100 15

100

147.9

244

410

188.4

8.95 17457 12313

86 15

100

134.2

237

409

171.0

8.35 14994 11686

71 15

100

118.8

231

406

151.4

7.64 12479 10927

60 15

100

107.7

225

406

137.2

7.00 10408 10418

52 15

100

99.6

221

404

126.9

6.53 9144 10038

46 15

100

93.6

218

404

119.3

6.12 8128 9766

152x152

51

100

93.3

185

357

118.8

5.83

44 15

100

85.9

181

356

109.5

5.39 4953 6495

37 15

100

78.7

177

354

100.3

4.90 4172 6270

30 15

100

71.6

173

353

91.2

4.37 3412 6054

23 15

100

64.4

167

352

82.1

3.73 2579 5861

15

15

15

15

15

Dimensions and properties to BS4-1.

Slimflor Beams are based on the range of UKC sections from Tata Steel.

These sizes are in addition to our standard range of BS4 sections.

The elastic and plastic neutral axis positions are measured from the underside of the plate.

28

90779

102152

42160

47415

42435

22454

8.52 18546 15651

10.0

22831

13783

9.51 20077 13034

5760

6729

SFB

Elastic NA
Plastic NA
yp

ye

Elastic modulus Radius of

Plastic Plastic
Buckling
Torsional
Warping
Torsional
Base section
gyration
neutral axis modulus
parameter
index
constant
constant

Axis Axis
Axis position
u
x
H
J Mass

x-x
x-x
y-y
Axis
Axis
Axis
Axis
per
top bottom
x-x
y-y
yp
x-x
y-y
metre
Serial
cm3 cm3 cm3 cm cm
cm
cm3 cm3 dm6 cm4 kg/m size
12375

14331

4118

19.0

11.9

15.4

16065

8568

0.797

6.31

57.4

13790

10668

12647

3630

18.5

11.9

13.3

13747

7492

0.793

6.98

46.3

9310

551

3153

18.0

11.9

10.5

11486

6440

0.787

7.89

36.4

5878

467

8997 11008

634 356x406

7530 9571 2745 17.6

11.9

7.57

9520 5535

0.776

9.03

28.7

3613

393

6501 8569 2463 17.3

11.9

5.75

8139 4907

0.764

10.15

23.7

2411

340

5483 7580 2188 16.9

12.0

4.96

6788 4295

0.748

11.68

19.2

1508

287

4495 6626 1927 16.5

12.1

4.16

5491 3710

0.724

13.77

15.1

879

235

3843 5918 1650 16.3

11.8

3.78

4687 3158

0.723

15.18

11.6

623

202

3375 5468 1537 16.0

11.9

3.37

4085 2900

0.703

16.86

9.98

445

177

2923 5036 1429 15.8

12.1

2.97

3510 2655

0.677

18.77

8.51

315

153

2469 4598 1322 15.4

12.3

2.57

2943 2411

0.643

21.06

7.08

217

129

2093

283

4716 6240 1625 15.3

9.83

5.88

6024 3365

0.782

8.90

10.3

3988 5529 1456 14.9

9.92

5.08

5040 2958

0.767

10.14

8.25

1329

240

3287 4849 1295 14.5

10.1

4.29

4104 2573

0.744

11.84

6.46

792

198

2610 4187 1145 14.1

10.3

3.50

3226 2210

0.710

14.23

4.88

436

158

2261 3848 1068 13.8

10.4

3.09

2775 2025

0.685

15.86

4.12

306

137

1947 3543 1001 13.5

10.6

2.71

2374 1861

0.654

17.59

3.46

218

118

1602

3209

928

13.2

10.8

2.28

1939

1683

0.606

19.71

2.78

148

97

2315

3455

965

12.2

8.91

4.20

2936

1949

0.721

9.98

2.87

678

167

1824

2976

859

11.8

9.13

3.39

2281

1676

0.679

11.94

2.12

371

132

1473

2630

785

11.4

9.37

2.81

1826

1486

0.628

13.90

1.63

224

107

1229

2397

733

11.1

9.60

2.38

1506

1356

0.575

15.51

1.31

153

89

1008

2178

689

10.7

9.85

1.99

1228

1240

0.493

17.03

1.04

109

73

1462

2277

666

10.1

7.83

3.85

1890

1347

0.684

8.82

1.033

474

127

1296

2112

633

9.86

7.95

3.45

1664

1255

0.657

9.61

0.877

351

113

1133

1950

100

600

9.63

8.08

3.05

1445

1166

0.620

10.52

0.734

256

976 1795

571

9.36

8.27

2.65

1236

1084

0.566

11.60

0.608

183

86

808 1633

538

9.08

8.50

2.21

1011

993

0.477

12.86

0.481

126

71

673 1487

513

8.71

8.71

1.88

843

923

0.000

13.93

0.381

93

60

586 1401

497

8.49

8.89

1.64

728

877

0.000

14.50

0.324

77

52

518 1328

484

8.25

9.05

1.48

642

842

0.000

14.86

0.278

68

46

454 988 377 6.96

7.53

1.87

593 678

0.000 10.62

0.124

89

51

390 920 365 6.73

7.70

1.59

505 644

0.000 11.13

0.102

72

44

327 851 354 6.45

7.91

1.41

421 611

0.000 11.51

0.081

59

37

265 781 343 6.12

8.15

1.29

340 579

0.000 11.66

0.062

50

30

198 691 333 5.61

8.45

1.17

259 545

0.000 11.49

0.043

44

23

356x368

305x305

254x254

203x203

152x152

29

Dimensions and properties

Advance UK Angles

Equal Angles

90

r1

r2

Designation
Distance to
Second moment

centre of
of area
Serial
Thickness
Mass
Root
Toe
Area of
gravity

size per
radius radius
section
Axis Axis Axis
A x A
t
metre r1 r2
C
x-x, y-y
u-u
v-v
mm x mm
mm
kg/mm
mm
mm
cm2 cm cm4 cm4 cm4
24

71.1

18

9.0

90.6

5.84

3331 5280 1380

20

200x200

59.9

18

9.0

76.3

5.68

2851 4530 1170

18

54.2

18

9.0

69.1

5.60

2600 4150 1050

16

48.5

18

9.0

61.8

5.52

2342 3720 960

1050

150x150

18

15

40.1

16

8.0

51.0

4.37

33.8

16

8.0

43.0

4.25

1680

440

898 1430 370

12

27.3

16

8.0

34.8

4.12

737 1170 303

10

23.0

16

8.0

29.3

4.03

624 990 258

26.6

13

6.5

33.9

3.51

445

12

120x120

21.6

13

6.5

27.5

3.40

368 584 152

10

18.2

13

6.5

23.2

3.31

313 497 129

8 14.7

13

6.5

18.7

3.23

256 411 107

100x100

15

15

21.9

710

12

6.0

27.9

3.02

249

12 17.8

12

6.0

22.7

2.90

207
328 85.7

10 15.0

12

6.0

19.2

2.82

177
280 73.0

8 12.2

12

6.0

15.5

2.74

145
230 59.9

90x90
12 15.9

11

5.5

20.3

2.66

148
235 62.0

10 13.4

11

5.5

17.1

2.58

127
201 52.6

8 10.9

11

5.5

13.9

2.50

104
166 43.1

11

5.5

12.2

2.45

9.6

Dimensions and properties to BS EN 10056-1.

These sizes are in addition to our standard range to the BS EN 10056-1 specification.

* Sections in italics may become slender under axial compression.

30

395

186

92.6 147

105

38.3

y
90

UKA

C
C
u

Radius of
Elastic
Torsional
Equivalent
Indicative Pcy*
Designation

gyration
modulus
constant
slenderness
values for

coefficient
S355 steel
Thickness
Serial
Axis
Axis
Axis
Axis
for
size
x-x, y-y
u-u
v-v
x-x, y-y
J
a Le=3.5m t
AxA
cm
cm
cm
cm3 cm4 kN mm
mm x mm
6.06

7.63

3.90

235

182

2.50

1730

24

6.11

7.71

3.92

199

107

3.05

1470

20

6.13

7.75

3.90

181

78.9

3.43

1260 18

6.16

7.76

3.94

162

56.1

3.85

974 16

200x200

4.54 5.74 2.94 98.8 58.6 2.48
695
18
150x150

4.57 5.77 2.93 83.5 34.6 3.01
591
15

4.60 5.80 2.95 67.8 18.2 3.77
413 12

4.62 5.81 2.97 56.9 10.8 4.51
282 10

3.62 4.58 2.34 52.4 27.0 2.37
328
15
120x120

3.65 4.61 2.35 42.7 14.2 2.99
267
12
3.67

4.63

2.36

36.0

8.41

3.61

209 10

3.69

4.69

2.39

29.1

4.44

4.56

141 8

2.98 3.76 1.94 35.6 22.3 1.92
196
15
100x100

3.02 3.80 1.94 29.1 11.8 2.44
159
12
3.04

3.82

1.95

24.6

6.97

2.94

136

3.06

3.85

1.97

20.0

3.68

3.70

101 8

10

2.70 3.40 1.75 23.4 10.5 2.17
118
12
90x90
2.72

3.43

1.75

19.8

6.20

2.64

99.7

2.74

3.46

1.76

16.1

3.28

3.33

79.8 8

10

2.75

3.47

1.77

14.1

2.24

3.80

66.3 7

31

r2

Dimensions and properties

Advance UK Angles
Unequal Angles

t
r1

r2

Designation Distance to centre
Second moment
of gravity
of area
Serial
Thickness
Mass
Root
Toe
Area of
Cx
Cy
size
per
radius
radius
section
Axis
Axis
Axis Axis
A x B
t
metre r1 r2
x-x y-y
u-u v-v
mm x mm
mm
kg/mm
mm
mm
cm2
cm cm
cm4 cm4 cm4
cm4
200x150 18 47.1 15 7.5 60.0 6.33 3.85 2376
1146
2920
623
15 39.6 15 7.5 50.5 6.21 3.73 2023
979
2480
526
12 32.0 15 7.5 40.8 6.08 3.61 1653
803
2030
430
200x100 15 33.7 15 7.5 43.0 7.16 2.22 1759
299
1860
193
12 27.3 15 7.5 34.8 7.03 2.10 1441
247
1530
159
10 23.0 15 7.5 29.2 6.93 2.01 1219
210
1290
135
150x90 15 26.6 12 6.0 33.9 5.21 2.23 761
205 841
126
12 21.6 12 6.0 27.5 5.08 2.12 627
171 694
104
10 18.2 12 6.0 23.2 5.00 2.04 533
146 591
88.3
150x75 15 24.8 12 6.0 31.7 5.52 1.81 713
119 753
78.6

12 20.2 12 6.0 25.7 5.40 1.69 589 99.6

623
64.7

10 17.0 12 6.0 21.7 5.31 1.61 501 85.4

531
55.1
125x75 12 17.8 11 5.5 22.7 4.31 1.84 354 95.5
391
58.5
10 15.0 11 5.5 19.1 4.23 1.76 302 82.1
334
49.9
8 12.2 11 5.5 15.5 4.14 1.68 247 67.6
274
40.9
100x75 12 15.4 10 5.0 19.7 3.27 2.03 189 90.2
230
49.5
10 13.0 10 5.0 16.6 3.19 1.95 162 77.6
197
42.2
8 10.6 10 5.0 13.5 3.10 1.87 133 64.1
162
34.6
100x65 10 12.3 10 5.0 15.6 3.36 1.63 154 51.0
175
30.1
8 9.9 10 5.0 12.7 3.27 1.55 127 42.2
144
24.8
7 8.8 10 5.0 11.2 3.23 1.51 113 37.6
128
22.0
Dimensions and properties to BS EN 10056-1.

These sizes are in addition to our standard range to the BS EN 10056-1 specification.

* Sections in italics may become slender under axial compression.

32

UKA

x
Cx
Cy

Radius of Elastic
Angle
Torsional Equivalent
Mono-
Indicative Pcy *
Designation

gyration modulus
Axis x-x
constant slenderness
symmetry
values for

to coefficient
index
S355 steel Thickness
Serial

Axis
Axis
Axis
Axis
Axis
Axis
Axis u-u for size
x-x
y-y
u-u
v-v
x-x
y-y
tan J Min. Max.
Le=3.5m t A x B
a kN mm
cm
cm
cm
cm
cm3 cm3 cm4
a a
mm x mm
6.29

4.37

6.98

3.22

174

0.549

67.9

2.93

3.72

4.60

932

6.33

4.40

7.01

3.23

147

103
86.9

0.551

39.9

3.53

4.50

5.55

722 15

6.36

4.44

7.05

3.25

119

70.5

0.552

20.9

4.43

5.70

6.97

445

12

6.40

2.64

6.58

2.12

137

38.4

0.260

34.3

3.54

5.17

9.19

349

15

6.43

2.67

6.63

2.14

111

31.3

0.262

18.0

4.42

6.57

250

12
10

11.5

18

200x150

200x100

6.46
2.68
6.65
2.15 93.3 26.3 0.263 10.7 5.26 7.92 13.9

179

4.74
2.46
4.98
1.93 77.7 30.4 0.354 26.8 2.58 3.59 5.96

235 15 150x90

4.78
2.49
5.02
1.94 63.3 24.8 0.358 14.1 3.24 4.58 7.50

192 12

4.80
2.51
5.05
1.95 53.3 21.0 0.360 8.30
3.89 5.56 9.03

154 10

4.75
1.94
4.87
1.57 75.2 21.0 0.253 25.1 2.62 3.74 6.84

154 15 150x75

4.78
1.97
4.92
1.59 61.3 17.1 0.258 13.2 3.30 4.79 8.60

126 12

4.81
1.99
4.95
1.59 51.7 14.5 0.261 7.80
3.95 5.83 10.4

103 10

3.95
2.05
4.15
1.61 43.2 16.9 0.354 11.6 2.66 3.73 6.23

114 12 125x75

3.97
2.07
4.18
1.62 36.5 14.3 0.357 6.87
3.21 4.55 7.50

95.8 10

4.00
2.09
4.20
1.62 29.6 11.6 0.360 3.62
4.00 5.75 9.43

74.3 8

3.10
2.14
3.42
1.59 28.1 16.5 0.540 10.0 2.10 2.64 3.46

96.6 12 100x75

3.12
2.16
3.44
1.59 23.8 14.0 0.544 5.95
2.54 3.22 4.17

81.4 10

3.14
2.18
3.46
1.60 19.3 11.4 0.547 3.13
3.18 4.08 5.24

66.1 8

3.14
1.81
3.35
1.39 23.2 10.5 0.410 5.61
2.52 3.43 5.45

59.8 10 100x65

3.16

1.83

3.37

1.40

18.9

8.54

0.413

2.96

3.14

4.35

6.86

49.3

3.17

1.83

3.38

1.40

16.6

7.53

0.415

2.02

3.58

5.00

7.85

42 7

33

Dimensions and properties

r

Advance UK Tees

Split from Advance UK Beams

Designation
Ratios for
Second

local
moment of

Mass
Cut
Width of Depth of Thickness Thickness
Root buckling
Dimension
area

per
from
section
section
of web
of flange
radius
Flange Web
Axis Axis
Serial metre
UKB
B
d
t
T
r
B/2T
d/t
Cx
x-x
y-y
size kg/m
mm mm
mm
mm
mm
cm
cm4 cm4
254x343

63
62.6
686x254x125
253.0
338.9 11.7 16.2 15.2 7.81 29.0 8.85 8976 2191

305x305
119
119.0
610x305x238
311.4
317.9 18.4 31.4 16.5 4.96 17.3 7.11 12355 7918

90
89.5
610x305x179
307.1
310.0 14.1 23.6 16.5 6.51 22.0 6.69 9043 5704

75
74.6
610x305x149
304.8
306.1 11.8 19.7 16.5 7.74 25.9 6.45 7415 4654

229x305
70
69.9
610x229x140
230.2
308.5 13.1 22.1 12.7 5.21 23.5 7.61 7741 2253

63
62.5
610x229x125
229.0
306.0 11.9 19.6 12.7 5.84 25.7 7.54 6898 1966

57
56.5
610x229x113
228.2
303.7 11.1 17.3 12.7 6.60 27.4 7.58 6265 1717

51
50.6
610x229x101
227.6
301.2 10.5 14.8 12.7 7.69 28.7 7.78 5691 1457

178x305
50
50.1
610x178x100
179.2
303.7 11.3 17.2 12.7 5.21 26.9 8.57 5893 829

46
46.1
610x178x92
178.8
301.5 10.9 15.0 12.7 5.96 27.7 8.78 5454 718

41
40.9
610x178x82
177.9
299.3 10.0 12.8 12.7 6.95 29.9 8.88 4842 603

312x267
137
136.7
533x312x272
320.2
288.8 21.1 37.6 12.7 4.26 13.7 6.28 10606
10308

110
109.4
533x312x219
317.4
280.4 18.3 29.2 12.7 5.43 15.3 6.09 8529 7795

91
90.7
533x312x182
314.5
275.6 15.2 24.4 12.7 6.44 18.1 5.78 6894 6333

75
75.3
533x312x150
312.0
271.5 12.7 20.3 12.7 7.68 21.4 5.54 5616 5143

210x267
69
69.1
533x210x138
213.9
274.5 14.7 23.6 12.7 4.53 18.7 6.94 5986 1932

61
61.0
533x210x122
211.9
272.2 12.7 21.3 12.7 4.97 21.4 6.66 5161 1694

55
54.5
533x210x109
210.8
269.7 11.6 18.8 12.7 5.61 23.3 6.61 4604 1471

51
50.5
533x210x101
210.0
268.3 10.8 17.4 12.7 6.03 24.8 6.53 4245 1346

46
46.0
533x210x92
209.3
266.5 10.1 15.6 12.7 6.71 26.4 6.55 3885 1195

41
41.1
533x210x82
208.8
264.1 9.6 13.2
12.7 7.91
27.5 6.75 3527
1004

165x267
43
42.3
533x165x85
166.5
267.1 10.3 16.5 12.7 5.05 25.9 7.23 3750 637

37
37.4
533x165x74
165.9
264.5 9.7 13.6
12.7 6.10
27.3 7.46 3352 520

33
32.8
533x165x66
165.1
262.4 8.9 11.4
12.7 7.24
29.5 7.59 2960 429

191x229

81

67
66.6
457x191x133
196.7
240.3 15.3 26.3 10.2 3.74 15.7 5.96 4178 1675

53
52.9
457x191x106
194.0
234.6 12.6 20.6 10.2 4.71 18.6 5.73 3264 1257

49
49.1
457x191x98
192.8
233.5 11.4 19.6 10.2 4.92 20.5 5.53 2967 1174

45
44.6
457x191x89
191.9
231.6 10.5 17.7 10.2 5.42 22.1 5.47 2684 1045

41
41.0
457x191x82
191.3
229.9 9.9 16.0
10.2 5.98
23.2 5.47 2474 935

37
37.1
457x191x74
190.4
228.4 9.0 14.5
10.2 6.57
25.4 5.38 2224 836

34
33.5
457x191x67
189.9
226.6 8.5 12.7
10.2 7.48
26.7 5.46 2034 726

80.7

457x191x161

199.4

246.0

18.0

32.0

10.2

3.12

13.7

6.22

5162

2125

152x229
41
41.0
457x152x82
155.3
232.8 10.5 18.9 10.2 4.11 22.2 5.96 2596 592

37
37.1
457x152x74
154.4
230.9 9.6 17.0
10.2 4.54
24.1 5.88 2332 523

34
33.6
457x152x67
153.8
228.9 9.0 15.0
10.2 5.13
25.4 5.91 2121 456

30
29.9
457x152x60
152.9
227.2 8.1 13.3
10.2 5.75
28.0 5.84 1879 397

26
26.1
457x152x52
152.4
224.8 7.6 10.9
10.2 6.99
29.6 6.04 1670 322

Dimensions and properties to BS4-1.

These sizes are in addition to our standard range of BS4 sections.

* Note that the warping constant units are cm6 not dm6.
Properties have been calculated assuming that there is no loss of material owing to splitting.
The buckling parameter is omitted when the second moment of area about the y-y axis exceeds that
about the x-x axis as lateral torsional buckling due to bending about the x-x axis is not possible.
Non-standard offline process please consult with Tata Steel for availability see pages 59.

34

y
Cx
x

UKT

Radius of Elastic modulus Plastic

Buckling
Torsional
Mono-
Warping
Torsional Area of Designation
gyration modulus
parameter
index
symmetry constant
constant section

Axis
Axis Axis
u
x
index
(*)
J

Axis Axis
x-x x-x y-y Axis Axis
H
x-x y-y
Flange Toe
x-x y-y

Serial
2
cm cm
cm3 cm3 cm3 cm3 cm3 cm6 cm4 cm
size
10.6

5.24

1014

358

173

643

271

0.651

22.0

0.740

2089

57.9

79.7

63 254x343

9.03
7.23 1738
501
509
894 787 0.483 10.6 0.662
11268 391 152
119
305x305

8.91
7.07 1353
372
371
656 572 0.484 13.8 0.664 4709 170 114
90
8.83

7.00

1150

307

305

538

469

0.483

16.4

0.666

2690

9.32

5.03

1017

333

196

592

306

0.613

15.3

0.727

2558

99.8
108

95.0

75

89.1

70 229x305

9.31
4.97 915
299
172
531
268
0.617 17.1 0.728 1844 76.9
79.7
63

9.33
4.88 826
275
150
489
235
0.626 19.0 0.731 1403 55.5
72.0
57

9.40
4.76 732
255
128
456
200
0.644 21.6 0.736 1081 38.3
64.4
51

9.60
3.60 688
270
92.5
490
148
0.694 19.4 0.768 1233 47.3
63.9
50
178x305

9.64
3.50 621
255
80.3
468
129
0.710 21.5 0.774 1048 35.3
58.7
46

9.64
3.40 545
230
67.8
425
109
0.722 24.3 0.778 780 24.3
52.1
41

7.81
7.69 1688
469
644
857 993 0.247 7.96 0.613
17255 642 174
137
312x267

7.82
7.48 1400
389
491
696 757 0.332 9.93 0.617 8725 320 139
110

7.72
7.40 1193
317
403
562 619 0.324 11.7 0.618 4921 186 116
91
7.65

7.32

1014

260

330

458

505

0.326

14.0

0.619

2780

108

95.9

75

8.24
4.68 862
292
181
520
284
0.609 12.5 0.719 2493 125 88.1
69
210x267

8.15
4.67 775
251
160
446
250
0.600 13.8 0.719 1657 88.9
77.7
61

8.14
4.60 697
226
140
401
218
0.605 15.5 0.721 1197 63.0
69.4
55

8.12
4.57 650
209
128
371
200
0.606 16.6 0.722 951 50.3
64.3
51

8.14
4.51 593
193
114
343
178
0.613 18.3 0.724 737 37.7
58.7
46

8.21
4.38 523
179
96.1
320
150
0.634 20.8 0.730 565 25.7
52.3
41

8.34
3.44 519
192
76.6
346
122
0.672 17.7 0.758 670 36.8
54.0
43
165x267

8.39
3.30 449
176
62.7
321
100
0.693 20.6 0.765 514 23.9
47.6
37

8.41
3.20 390
159
52.0
291 83.1
0.708 23.6 0.771 378 15.9
41.9
33

7.09
4.55 830
281
213
507 336 0.573 8.24 0.699 3775 256 103
81
191x229
7.01

4.44

702

231

170

414

267

0.576

9.82

0.702

2127

146

84.9

67

6.96
4.32 569
184
130
328
203
0.583 12.2 0.706 1070 72.6
67.4
53

6.88
4.33 536
167
122
296
189
0.573 12.9 0.705 835 60.5
62.6
49

6.87
4.29 491
152
109
269
169
0.576 14.1 0.706 628 45.2
56.9
45

6.88
4.23 452
141
97.8
250
152
0.583 15.5 0.709 494 34.5
52.2
41

6.86
4.20 413
127
87.8
225
136
0.583 16.9 0.709 365 25.8
47.3
37

6.90
4.12 372
118
76.5
209
119
0.597 18.9 0.713 280 18.5
42.7
34

7.05
3.37 436
150
76.3
267
120
0.634 13.7 0.740 534 44.5
52.3
41
152x229

7.03
3.33 397
135
67.8
242
107
0.636 15.1 0.742 396 32.9
47.2
37

7.04
3.27 359
125
59.3
223 93.3
0.646 16.8 0.745 305 23.8
42.8
34

7.02
3.23 322
111
52.0
199 81.5
0.648 18.8 0.746 217 16.9
38.1
30

7.08
3.11 276
102
42.3
183 66.6
0.671 22.0 0.753 161 10.7
33.3
26

35

Dimensions and properties

r

Advance UK Tees

Split from Advance UK Beams

Designation
Ratios for
Second

local
moment of

Mass
Cut
Width of Depth of Thickness Thickness
Root buckling
Dimension
area

per
from
section
section
of web
of flange
radius
Flange Web
Axis Axis
Serial metre
UKB
B
d
t
T
r
B/2T
d/t
Cx
x-x
y-y
size kg/m
mm mm
mm
mm
mm
cm
cm4 cm4
178x203 43
42.6
406x178x85
181.9
208.6 10.9 18.2 10.2 5.00 19.1 4.91 2028 915

37
37.1
406x178x74
179.5
206.3 9.5 16.0
10.2 5.61
21.7 4.76 1736
773

34
33.5
406x178x67
178.8
204.6 8.8 14.3
10.2 6.25
23.3 4.73 1573
682

30
30.0
406x178x60
177.9
203.1 7.9 12.8
10.2 6.95
25.7 4.64 1395
602

27
27.0
406x178x54
177.7
201.2 7.7 10.9
10.2 8.15
26.1 4.83 1294
511
140x203

27

26.6

406x140x53

143.3

203.3

7.9

12.9

10.2

5.55

25.7

5.16

1320

317

23
23.0
406x140x46
142.2
201.5 6.8 11.2
10.2 6.35
29.6 5.02 1123
269

20
19.5
406x140x39
141.8
198.9 6.4 8.6
10.2 8.24
31.1 5.32 979
205
171x178
34
33.5
356x171x67
173.2
181.6 9.1 15.7
10.2 5.52
20.0 4.00 1154
681

29
28.5
356x171x57
172.2
178.9 8.1 13.0
10.2 6.62
22.1 3.97 986
554
26
25.5
356x171x51
171.5
177.4 7.4 11.5
10.2 7.46
24.0 3.94 882
484

23
22.5
356x171x45
171.1
175.6 7.0 9.7
10.2 8.82
25.1 4.05 798
406
127x178
20
19.5
356x127x39
126.0
176.6 6.6 10.7
10.2 5.89
26.8 4.43 728
179

17
16.5
356x127x33
125.4
174.4 6.0 8.5
10.2 7.38
29.1 4.56 626
140
165x152
27
27.0
305x165x54
166.9
155.1 7.9 13.7 8.9 6.09
19.6 3.21 642
531

23
23.0
305x165x46
165.7
153.2 6.7 11.8 8.9 7.02
22.9 3.07 536
448

20
20.1
305x165x40
165.0
151.6 6.0 10.2 8.9 8.09
25.3 3.03 468
382
127x152
24
24.0
305x127x48
125.3
155.4 9.0 14.0 8.9 4.48
17.3 3.94 662
231

21
20.9
305x127x42
124.3
153.5 8.0 12.1 8.9 5.14
19.2 3.87 573
194

19
18.5
305x127x37
123.4
152.1 7.1 10.7 8.9 5.77
21.4 3.78 501
168
102x152
17
16.4
305x102x33
102.4
156.3 6.6 10.8 7.6 4.74
23.7 4.14 487 97.1

14
14.1
305x102x28
101.8
154.3 6.0 8.8 7.6 5.78
25.7 4.20 420 77.7

13
12.4
305x102x25
101.6
152.5 5.8 7.0 7.6 7.26
26.3 4.43 377 61.5
146x127
22
21.5
254x146x43
147.3
129.7 7.2 12.7 7.6 5.80
18.0 2.64 343
339

19
18.5
254x146x37
146.4
127.9 6.3 10.9 7.6 6.72
20.3 2.55 292
285

16
15.5
254x146x31
146.1
125.6 6.0 8.6 7.6 8.49
20.9 2.66 259
224
102x127
14
14.1
254x102x28
102.2
130.1 6.3 10.0 7.6 5.11
20.7 3.24 277 89.3

13
12.6
254x102x25
101.9
128.5 6.0 8.4 7.6 6.07
21.4 3.32 250 74.3

11
11.0
254x102x22
101.6
126.9 5.7 6.8 7.6 7.47
22.3 3.45 223 59.7
133x102
15
15.0
203x133x30
133.9
103.3 6.4 9.6 7.6 6.97
16.1 2.11 154
192

13
12.5
203x133x25
133.2
101.5 5.7 7.8 7.6 8.54
17.8 2.10 131
154
Dimensions and properties to BS4-1.

These sizes are in addition to our standard range of BS4 sections.

* Note that the warping constant units are cm6 not dm6.
Properties have been calculated assuming that there is no loss of material owing to splitting.
The buckling parameter is omitted when the second moment of area about the y-y axis exceeds that
about the x-x axis as lateral torsional buckling due to bending about the x-x axis is not possible.
Non-standard offline process please consult with Tata Steel for availability see pages 59.

36

y
Cx
x

UKT

Radius of Elastic modulus Plastic

Buckling
Torsional
Mono-
Warping
Torsional Area of Designation
gyration modulus
parameter
index
symmetry constant
constant section

Axis
Axis Axis
u
x
index
(*)
J

Axis Axis
x-x x-x y-y Axis Axis
H
x-x y-y
Flange Toe
x-x y-y

Serial
2
cm cm
cm3 cm3 cm3 cm3 cm3 cm6 cm4 cm
size
6.11

4.11

413

127

226

157

0.556

12.2

0.694

538

46.3

54.3

43 178x203

6.06

4.04

365

109

101
86.1

194

133

0.555

13.8

0.696

350

31.3

47.2

37

6.07

3.99

332

100

76.3

177

118

0.561

15.2

0.698

262

23.0

42.8

34

6.04

3.97

301

89.0

67.6

157

104

0.561

16.9

0.699

186

16.6

38.3

30

6.13

3.85

268

84.6

57.5

150

89.1

0.588

19.2

0.705

146

11.5

34.5

27

6.23

3.06

256

87.0

44.3

155

69.5

0.636

17.1

0.739

148

14.4

34.0

27 140x203

6.19

3.03

224

74.2

37.8

132

59.0

0.633

19.5

0.740

93.7

9.49

29.3

23

6.28

2.87

184

67.2

28.9

121

45.4

0.668

23.8

0.750

66.3

5.33

24.8

20

5.20

3.99

288

81.5

78.6

145

0.500

12.2

0.672

249

27.8

42.7

34 171x178

5.21

3.91

248

70.9

64.4

125

99.4

0.514

14.4

0.676

154

16.6

36.3

29

5.21

3.86

224

63.9

56.5

113

87.1

0.521

16.1

0.677

110

11.9

32.4

26

5.28

3.76

197

59.1

47.4

104

73.3

0.546

18.4

0.683

79.2

7.90

28.7

23

5.41

2.68

164

55.0

28.4

98.0

44.5

0.632

17.6

0.739

57.1

7.53

24.9

20 127x178

5.45

2.58

137

48.6

22.3

87.2

35.1

0.655

21.1

0.746

38.0

4.38

21.1

17

4.32

3.93

200

52.2

63.7

92.8

97.8

0.389

11.8

0.636

34.4

27 165x152

121

128

17.3

4.27
3.91 174
43.7
54.1
77.1 82.8
0.380 13.6 0.636 78.6 11.1 29.4
23
4.27

3.86

155

38.6

46.3

4.65

2.74

168

57.1

36.8

67.6
102

70.9

0.393

15.5

0.638

58.0

0.602

11.7

0.714

52.0
104

7.35
15.8

25.7

20

30.6

24 127x152

4.63
2.70 148
49.9
31.3
88.9 49.2
0.606 13.3 0.716 69.2 10.5 26.7
21
4.61

2.67

132

43.8

27.2

77.9

42.7

0.606

14.9

0.718

47.4

7.36

23.6

19

4.82

2.15

118

42.3

19.0

75.8

30.0

0.656

15.8

0.749

36.8

6.08

20.9

17 102x152

4.84

2.08

100

37.4

15.3

67.5

24.2

0.673

18.7

0.756

25.2

3.69

17.9

14

4.88

1.97

85

34.8

12.1

63.9

19.4

0.705

21.8

0.766

20.4

2.37

15.8

13

3.54
3.52 130
33.2
46.0
59.5 70.5
0.202 10.6 0.613 64.9 11.9 27.4
22
146x127
3.52

3.48

28.5

39.0

50.7

59.7

0.233

12.2

0.616

41.0

7.65

23.6

19

3.61

3.36

115
97.4

26.2

30.6

46.0

47.1

0.376

14.8

0.623

24.5

4.26

19.8

16

3.92

2.22

85.5

28.3

17.5

50.4

27.4

0.607

13.8

0.720

21.0

4.77

18.0

14 102x127

3.95

2.15

75.3

26.2

14.6

46.9

23.0

0.628

15.8

0.727

15.9

3.20

16.0

13

3.99

2.06

64.5

24.1

11.7

43.5

18.6

0.656

18.2

0.736

12.0

2.06

14.0

11

2.84

3.17

73.1

18.8

28.7

33.5

44.1

10.7

0.569

21.7

5.13

19.1

15 133x102

2.86

3.10

62.4

16.2

23.1

28.7

35.5

12.8

0.572

12.6

2.97

16.0

13

37

Dimensions and properties

Advance UK Tees

Split from Advance UK Columns

Designation
Ratios for
Second

local
moment of

Mass
Cut
Width of Depth of Thickness Thickness
Root buckling
Dimension
area

per
from
section
section
of web
of flange
radius
Flange Web
Axis Axis
Serial metre
UKC
B
d
t
T
r
B/2T
d/t
Cx
x-x
y-y
size kg/m
mm mm
mm
mm
mm
cm
cm4 cm4
305x152 79
79.0
305x305x158
311.2
163.5 15.8 25.0 15.2 6.22 10.3 3.04 1532 6285

69
68.4
305x305x137
309.2
160.2 13.8 21.7 15.2 7.12 11.6 2.86 1286 5350

59
58.9
305x305x118
307.4
157.2 12.0 18.7 15.2 8.22 13.1 2.69 1079 4530

49
48.4
305x305x97
305.3
153.9 9.9 15.4
15.2 9.91
15.5 2.50 858 3654
254x127
84
83.5
254x254x167
265.2
144.5 19.2 31.7 12.7 4.18 7.53 3.07 1199 4935

66
66.0
254x254x132
261.3
138.1 15.3 25.3 12.7 5.16 9.03 2.70 871 3766

54
53.5
254x254x107
258.8
133.3 12.8 20.5 12.7 6.31 10.4 2.45 676 2964

45
44.4
254x254x89
256.3
130.1 10.3 17.3 12.7 7.41 12.6 2.21 524 2429

37
36.5
254x254x73
254.6
127.0 8.6 14.2
12.7 8.96
14.8 2.05 417 1954
203x102
64
63.7
203x203x127
213.9
120.7 18.1 30.1 10.2 3.55 6.67 2.73 637 2460

57
56.7
203x203x113
212.1
117.5 16.3 26.9 10.2 3.94 7.21 2.56 540 2143

50
49.8
203x203x100
210.3
114.3 14.5 23.7 10.2 4.44 7.88 2.38 453 1840

43
43.0
203x203x86
209.1
111.0 12.7 20.5 10.2 5.10 8.74 2.20 373 1564

36
35.5
203x203x71
206.4
107.8 10.0 17.3 10.2 5.97 10.8 1.95 280 1269

30
30.0
203x203x60
205.8
104.7 9.4 14.2
10.2 7.25
11.1 1.89 244 1032

26
26.0
203x203x52
204.3
103.0 7.9 12.5
10.2 8.17
13.0 1.75 200 889

23
23.0
203x203x46
203.6
101.5 7.2 11.0
10.2 9.25
14.1 1.69 177 774
152x76
26
25.6
152x152x51
157.4 85.1 11.0 15.7 7.6 5.01 7.74 1.79 141 511

22
22.0
152x152x44
155.9
83.0 9.5 13.6 7.6 5.73 8.74
1.66 116 430

19
18.5
152x152x37
154.4
80.8 8.0 11.5 7.6 6.71
10.1 1.53 93.1
353

15
15.0
152x152x30
152.9
78.7 6.5 9.4 7.6 8.13
12.1 1.41 72.2
280

12
11.5
152x152x23
152.2
76.1 5.8 6.8 7.6
11.2 13.1 1.39 58.5
200
Dimensions and properties to BS4-1.

These sizes are in addition to our standard range of BS4 sections.

* Note that the warping constant units are cm6 not dm6.
Properties have been calculated assuming that there is no loss of material owing to splitting.
Values for the buckling parameter u and torsional index x are not given as the second moment of area about the y-y axis
exceeds that about the x-x axis and lateral torsional buckling due to bending about the x-x axis is not possible.
Non-standard offline process please consult with Tata Steel for availability see pages 59.

38

Cx

UKT

Radius of Elastic modulus Plastic

Mono-
Warping
Torsional
Area of
Designation


gyration
modulus symmetry
constant
constant
section

Axis
Axis
Axis
index
(*)
J
Axis
Axis
x-x
x-x
y-y
Axis
Axis
H
x-x
y-y
Flange
Toe
x-x
y-y
Serial
2
cm
cm
cm3 cm3 cm3 cm3 cm3 cm6 cm4 cm
size
3.90 7.90 503 115 404 225

615

0.268

3647

188

3.84

7.83

450

97.7

346

188

526

0.263

2341

124

3.79

7.77

401

82.8

295

156

448

0.262

1474

3.73

7.69

343

3.36

6.81

391

66.5
105

80.3

239

123

363

0.258

806

372

220

569

0.261

4545

312
159

3.22

6.69

323

78.3

288

159

439

0.250

2203

3.15

6.59

276

62.1

229

122

348

0.245

1146

45.5

85.9

101 79 305x152
87.2

69

75.1

59

61.7
106

49
84 254x127

84.1

66

68.2

54

3.04

6.55

237

48.5

190

94.0

288

0.242

660

51.1

56.7

45

2.99

6.48

204

39.2

153

74.0

233

0.236

359

28.8

46.5

37

2.80

5.50

233

68.2

230

145

352

0.279

2048

212

81.2

64 203x102

2.73

5.45

211

58.8

202

123

309

0.270

1425

152

72.3

57

103

104

2.67

5.39

190

50.0

175

2.61

5.34

169

41.9

150

84.6

267

0.266

951

228

0.257

605

68.1

63.4

50

54.8

43

2.49

5.30

143

31.8

123

63.6

187

0.254

343

40.0

45.2

36

2.53

5.20

129

28.4

100

54.3

153

0.245

195

23.5

38.2

30

128

2.46

5.18

115

23.4

87.0

44.5

132

0.243

2.45

5.13

105

20.9

76.0

39.0

115

0.242

100

2.08

3.96

79.0

21.0

64.9

41.4

2.04

3.92

70.0

17.5

55.2

34.0

84.4

0.281
0.281

87.2
122
76.7

15.8

33.1

26

11.0

29.4

23

24.3

32.6

26 152x76

15.8

28.0

22

1.99

3.87

60.7

14.2

45.7

27.1

69.8

0.277

44.9

9.54

23.5

19

1.94

3.83

51.4

11.2

36.7

20.9

55.8

0.269

23.7

5.24

19.1

15

2.00

3.70

41.9

9.4

26.3

16.9

40.1

0.278

2.30

14.6

12

9.78

39

Detailing and fire

N

Advance UK Beams

UKB

d
C
t

Designation Dimensions for detailing and surface areas A/V ratio (m-1)


End Notch
Surface area
clearance
per
per
two end
Serial
C
N n
metre tonne
faces
Profile
size mm
mm mm
m2
m2
m2
3 sides

Profile Box
4 sides
3 sides

Box
4 sides

1016x305 487 17

150 86

3.20

6.58

0.124

45

50

40

45

437 15

150 80

3.17

7.25

0.111

50

55

40

50

393 14

150 74

3.14

8.00

0.100

55

65

45

55

349 13

152 70

3.13

8.96

0.0890

65

70

50

60

314 12

152 66

3.11

9.89

0.0800

70

80

55

65

272 10

152 62

3.10

11.4

0.0694

80

90

65

75

249 10

152 56

3.08

12.4

0.0634

90

95

70

80

222 10

152 52

3.06

13.8

0.0566

95

110

80

90

914x419 388

210 62

3.44

8.87

0.0988

60

70

45

55

343 12

210 58

3.42

9.96

0.0874

70

80

50

60

914x305 289

156 52

3.01

10.4

0.0736

75

80

60

65

253 11

156 48

2.99

11.8

0.0646

85

95

65

75

224 10

156 44

2.97

13.2

0.0572

95

105

75

85

201 10

156 40

2.96

14.7

0.0512

105

115

80

95

838x292 226

150 46

2.81

12.4

0.0578

85

100

70

80

13
12

10

194

150 40

2.79

14.4

0.0494

100

115

80

90

176

150 38

2.78

15.8

0.0448

110

125

90

100
85

762x267 197

138 42

2.55

13.0

0.0502

90

100

70

173

10
9

138 40

2.53

14.6

0.0440

105

115

80

95

147

138 34

2.51

17.1

0.0374

120

135

95

110

145 105

120

134

138 32

2.51

18.7

0.0342

130

686x254 170

132 40

2.35

13.8

0.0434

95

110

75

152

132 38

2.34

15.4

0.0388

105

120

85

95

140

132 36

2.33

16.6

0.0356

115

130

90

105

145 100

115

125
610x305 238

8
11

90

132 32

2.32

18.5

0.0318

130

158 48

2.45

10.3

0.0606

70

80

50

60

179

158 42

2.41

13.5

0.0456

90

105

70

80

149

158 38

2.39

16.0

0.0380

110

125

80

95

610x229 140

120 36

2.11

15.1

0.0356

105

120

80

95

125

120 34

2.09

16.7

0.0318

115

130

90

105

113

120 30

2.08

18.4

0.0288

130

145 100

115

101

120 28

2.07

20.5

0.0258

145

160 110

130

610x178 100

94 30

1.89

18.8

0.0256

135

150

92

94 28

1.88

20.4

0.0234

145

160 120

135

180 130

150

82

1.87

22.9

0.0208

160

2.37

8.67

0.0696

60

70

40

50

219 11

160 42

2.33

10.7

0.0558

70

85

50

65

182 10

160 38

2.31

12.7

0.0462

85

100

60

75

150

160 34

2.29

15.2

0.0384

105

120

75

90

533x210 138

110 38

1.90

13.7

0.0352

95

110

75

85

122

110 34

1.89

15.5

0.0310

110

120

85

95

109

110 32

1.88

17.2

0.0278

120

135

95

110

13

94 26

125

160 52

533x312 272

110

101

110 32

1.87

18.5

0.0258

130

145 100

115

92

110 30

1.86

20.2

0.0234

140

160 110

125

82

110 26

1.85

22.5

0.0210

155

175 120

140

533x165 85

90 30

1.69

19.9

0.0216

140

155

130

115

74

90 28

1.68

22.5

0.0190

160

175 130

145

66

90 26

1.67

25.4

0.0167

180

200 145

165

These sizes are in addition to our standard range of BS4 sections.

The dimension n = D-d to the nearest 2mm above. The dimension C = t/2 + 2mm to the nearest 1mm.
2
The dimension N is based on the outstand from web face to flange edge + 10mm to the nearest 2mm above and allows for rolling tolerances.
40

n
N
D

UKB

d
C
t

Designation Dimensions for detailing and surface areas A/V ratio (m-1)


End Notch
Surface area
clearance
per
per
two end
Serial
C
N n
metre tonne
faces
Profile
size mm
mm mm
m2
m2
m2
3 sides

Profile Box
4 sides
3 sides

457x191 161 11 102

44

1.73

10.7

0.0412

75

133 10

102

38

1.70

12.8

0.0340

90

100

70

80

106

102

32

1.67

15.8

0.0270

110

125

85

100

98 8

102

30

1.67

17.0

0.0250

120

135

90

105

89 7

102

28

1.66

18.6

0.0228

130

145

100

115

82 7

102

28

1.65

20.1

0.0208

140

160

105

125

74 7

102

26

1.64

22.1

0.0189

155

175

115

135

67 6

102

24

1.63

24.3

0.0171

170

190

130

150

84

30

1.51

18.4

0.0210

130

145

105

120

84

28

1.50

20.2

0.0189

145

160

115

130

67 7 84 26 1.50 22.3

0.0171

155

175

125

145

60 6

84

24

1.49

24.9

0.0152

175

195

140

160

52 6

84

22

1.48

28.3

0.0133

200

220

160

180

406x178 85

96

30

1.52

17.8

0.0218

125

140

95

110

74 7

96

28

1.51

20.4

0.0189

140

160

105

125

67 6

96

26

1.50

22.3

0.0171

155

175

115

140

60 6

96

24

1.49

24.8

0.0153

170

195

130

155

54 6

96

22

1.48

27.3

0.0138

190

215

145

170

406x140 53

78

24

1.35

25.3

0.0136

180

200

140

160

78

22

1.34

29.1

0.0117

205

230

160

185

39 5 78 20 1.33 34.1

0.0099

240

270

190

215

356x171 67

457x152 82

74 7

46 5
7

85

60

Box
4 sides
65

94

26

1.38

20.6

0.0171

140

160

105

125

57 6

94

24

1.37

24.1

0.0124

165

190

120

145

51 6

94

22

1.36

26.7

0.0130

185

210

135

160

45 6

94

20

1.36

30.2

0.0115

205

235

150

180

356x127 39

70

22

1.18

30.2

0.0100

210

235

165

195

33 5

70

20

1.17

35.4

0.0084

250

280

195

225

305x165 54

90

24

1.26

23.3

0.0138

160

185

115

140

46 5

90

22

1.25

27.1

0.0117

185

210

135

160

40 5

90

20

1.24

30.8

0.0103

210

240

150

185

305x127 48

70

24

1.09

22.7

0.0122

160

180

120

145

42 6

70

22

1.08

25.8

0.0107

180

200

140

160

37 6

70

20

1.07

28.9

0.0094

200

225

155

180

305x102 33

58

20

1.01

30.8

0.0084

215

240

175

200

28 5

58

18

1.00

35.5

0.0072

250

280

200

230

25 5

58

16

0.992 40.0

0.0063

280

315

225

255

254x146 43

82

22

1.08

25.1

0.0110

170

195

120

150

37 5

82

20

1.07

28.9

0.0094

195

225

140

170

31 5

82

18

1.06

34.0

0.0079

230

270

165

200

254x102 28

58

18

0.904

31.9

0.0072

220

250

175

200

25 5

58

16

0.897 35.7

0.0064

250

280

190

225

22 5

58

16

0.890 40.5

0.0056

280

320

220

255

203x133 30

74

18

0.923

0.0076

205

240

145

180

25 5

74

16

0.915 36.5

0.0064

245

285

170

210

203x102 23

60

18

0.790

34.2

0.0059

235

270

175

205

178x102 19

60

16

0.738

38.7

0.0049

260

305

190

230

152x89 16

54

16

0.638

40.0

0.0041

270

315

195

235

127x76 13

46

16

0.537

41.4

0.0033

280

325

200

245

5
6

30.8

These sizes are in addition to our standard range of BS4 sections.

The dimension n = D-d to the nearest 2mm above. The dimension C = t/2 + 2mm to the nearest 1mm.
2
The dimension N is based on the outstand from web face to flange edge + 10mm to the nearest 2mm above and allows for rolling tolerances.
41

Detailing and fire

N

Advance UK Columns

UKC

C
t

Designation Dimensions for detailing and surface areas A/V ratio (m-1)


End Notch
Surface area
clearance
per
per
two end
Serial
C
N n
metre tonne
faces
Profile
size mm
mm mm
m2
m2
m2
3 sides

Profile Box
4 sides
3 sides

Box
4 sides

356x406 634 26 200 94

2.52

3.98

0.162

25

30

15

20

551 23

200

84

2.47

4.48

0.140

30

35

20

25

467 20

200

74

2.42

5.18

0.119

35

40

20

30

393 17

200

66

2.38

6.06

0.100

40

50

25

35

340 15

200

60

2.35

6.91

0.0866

45

55

30

35

287 13

200

52

2.31

8.05

0.0732

50

65

30

45

235 11

200

46

2.28

9.70

0.0598

65

75

40

50

356x368 202

190

44

2.19

10.8

0.0514

70

85

45

60

10

177

190

40

2.17

12.3

0.0452

80

95

50

65

153

190

36

2.16

14.1

0.0390

90

110

55

75

130

65

90

129 7 190 34 2.14 16.6

0.0328 110

305x305 283

15

158

60

1.94

6.86

0.0720

45

55

30

40

240 14

158

54

1.91

7.96

0.0612

50

60

35

45

198 12

158

48

1.87

9.44

0.0504

60

75

40

50

158 10

158

42

1.84

11.6

0.0402

75

90

50

65

137

158

38

1.82

13.3

0.0348

85

105

55

70

118

158

34

1.81

15.4

0.0300

100

120

60

85

97 7

158

32

1.79 18.5

0.0246

120

145

75

100

254x254 167

134

46

1.58

0.0426

60

75

40

50

134

38

1.55

0.0336

75

90

50

65

107 8 134 34 1.52 14.2

0.0272

95

110

60

75

89 7

134

30

1.50 16.9

0.0226

110

135

70

90

73 6

134

28

1.49 20.4

0.0186

130

160

80

110

203x203 127

12

132 10

108

42

1.28

10.0

0.0324

65

80

45

55

113 10

108

38

1.27

11.2

0.0290

75

90

45

60

100

108

34

1.25

12.6

0.0254

80

100

55

70

86 8

110

32

1.24 14.4

0.0220

95

115

60

80

71 7

110

28

1.22 17.2

0.0181

110

135

70

95

60 7

110

26

1.21 20.2

0.0153

130

160

80

110

52 6

110

24

1.20 23.1

0.0133

150

180

95

125

46 6

110

22

1.19 25.8

0.0117

170

200

105

140

84

24

0.935

0.0130

120

145

75

100

44 7

84

22

0.924 21.0

0.0112

135

165

85

115

37 6

84

20

0.912 24.7

0.0094

160

195

100

135

30 5

84

18

0.901 30.0

0.0077

195

235

120

160

23 5

84

16

0.889 38.7

0.0058

250

305

155

210

152x152 51

11

9.46
11.7

18.3

These sizes are in addition to our standard range of BS4 sections.

The dimension n = D-d to the nearest 2mm above.
2
The dimension C = t/2 + 2mm to the nearest 1mm.
The dimension N is based on the outstand from web face to flange edge + 10mm to the nearest 2mm above and allows for rolling tolerances.

42

n
N

Advance UK
Bearing Piles

UKBP

C
t

Designation Dimensions for detailing and surface areas A/V ratio (m-1)


End Notch
Surface area
clearance
per
per
two end
Serial
C
N n
metre tonne
faces
Profile
size mm
mm mm
m2
m2
m2
3 sides
356x368 174

Box
4 sides

190

36

2.17

12.5

0.0442

80

100

50

65

152 11

190

34

2.16

14.2

0.0388

90

110

55

75

133 10

190

32

2.14

16.1

0.0338

105

125

65

85

109

190

30

2.13

19.6

0.0278

125

155

75

105

305x305 223

12

Profile Box
4 sides
3 sides

158

46

1.89

0.0568

55

65

35

45

186 15

17

158

42

1.86

10.0

0.0474

65

80

40

55

149 12

158

36

1.83

12.3

0.0380

80

95

50

65

126 11

158

34

1.82

14.4

0.0322

95

115

60

80

110 10

158

32

1.80

16.4

0.0280

105

130

65

90

95 9

158

30

1.79

18.9

0.0242

120

150

75

100

88 8

158

28

1.78

20.2

0.0224

130

160

80

110

79 8

158

28

1.78

22.6

0.0200

145

175

90

120

254x254 85

134

28

1.50

17.6

0.0216

115

140

70

71 8

134

26

1.49

21.0

0.0181

135

165

85

110

63 7

134

24

1.48

23.5

0.0160

150

185

95

125

203x203 54

110

22

1.20

22.2

0.0137

145

175

90

120

110

20

1.19

26.5

0.0114

170

210

105

140

45 7

8.48

95

The dimension n = D-d to the nearest 2mm above. The dimension C = t/2 + 2mm to the nearest 1mm.
2
The dimension N is based on the outstand from web face to flange edge + 10mm to the nearest 2mm above and allows for rolling tolerances.

43

Detailing and fire

N

Advance UK Parallel
Flange Channels

UKPFC

d
C
t

Designation Dimensions for detailing and surface areas

A/V ratio (m-1)

End Notch
Surface area

clearance
per per
Serial
C
N n
metre tonne Profile Profile Profile Profile Box Box Box Box
size mm mm mm
m2 m2
3 sides 3 sides 3 sides 4 sides 3 sides 3 sides 3 sides 4 sides
430x100
64 13 96 36 1.23 19.1 135 95 75 150 115 75 75 130
380x100

54

12

98

34

1.13

20.9

150

110

85

165

125

85

85

140

300x100

46

11

98

32

0.969

21.3

150

115

85

165

120

85

85

140

300x90

41

11

88

28

0.932

22.5

160

120

90

175

130

90

90

150

260x90
35 10 88

28 0.854 24.5

170 135 100 190 135 100 100 160

260x75
28 9 74

26 0.796 28.8

205 150 115 225 170 115 115 190

230x90
32 10 90

28 0.795 24.7

170 140 100 195 135 100 100 155

230x75
26 9 76

26 0.737 28.7

200 155 115 225 165 115 115 185

200x90
30 9 90

28 0.736 24.8

170 140 100 195 130 100 100 155

200x75
23 8 76

26 0.678 29.0

200 160 115 225 160 115 115 185

180x90
26 9 90

26 0.697 26.7

185 155 110 210 135 110 110 165

180x75
20 8 76

24 0.638 31.4

215 175 125 245 170 125 125 195

150x90
24 9 90

26 0.637 26.7

180 160 110 210 130 110 110 160

150x75
18 8 76

24 0.579 32.3

220 190 130 255 165 130 130 200

125x65
15 8 66

22 0.489 33.0

225 195 135 260 170 135 135 200

100x50
10 7 52

18 0.382 37.5

255 215 155 295 190 155 155 230

Dimensions and properties to BS4-1.

The dimension n = D-d to the nearest 2mm above.
2
The dimension C = t + 2mm to the nearest 1mm.
The dimension N is equal to (B-t) + 6mm to the nearest 2mm above.

44

Bt

Detailing and fire

t

Asymmetric
Slimflor Beams

Nt

C
Nb

Bb

ASB

Designation
D
imensions for detailing and surface areas

Depth
Width Width of
Depth

Mass
of
of top
bottom Thickness Thickness Root
between
End
Notch Exposed surface

per
section flange
flange
of web
of flange radius
fillets clearance Top
Bottom
area per metre
Serial
metre
D Bt Bb t
T r d C Nt Nb n

size kg/m
mm mm mm mm mm mm mm mm
mm
mm
mm m2
300ASB
249*
249 342 203 313 40.0 40.0 27.0 208 22 92 148 68 0.393

196
196 342 183 293 20.0 40.0 27.0 208 12 92 148 68 0.373

185*
185 320 195 305 32.0 29.0 27.0 208 18 92 148 58 0.363

155
155 326 179 289 16.0 32.0 27.0 208 10 92 148 60 0.353

153*
153 310 190 300 27.0 24.0 27.0 208 16 92 148 52 0.348
280ASB
136*
136 288 190 300 25.0 22.0 24.0 196 15 94 148 48 0.344

124
124 296 178 288 13.0 26.0 24.0 196

9 94 148 52 0.340

105
105 288 176 286 11.0 22.0 24.0 196

8 94 148 48 0.330

100*
100 276 184 294 19.0 16.0 24.0 196 12 94 148 42 0.326
74 73.6 272 175 285 10.0

14.0 24.0 196

7 94 148 40

0.313

C is the dimension from the web centre line to the end of the incoming beam plus tolerance.
C = 2 + ( t / 2 ) To the nearest mm.
N is the horizontal distance to the remaining flange of the incoming beam plus tolerance from the face of the web.
N = 10 + ( B - t ) / 2 To the nearest even number above.
n is the vertical notch required to the incoming beam to miss the supporting flange and root.
n = ( D - d ) / 2 To the nearest even number above.
In service, ASBs are normally encased in concrete with only the underside of the lower flange exposed to fire.
The surface area figures quoted above are for the exposed part of the section equal to Bb + 2T.

45

Detailing and fire

Advance UK Angles
Equal Angles

Designation Surface area

per per
Serial
metre tonne
Profile
Profile
size
m2 m2
3 sides
3 sides

A/V ratio (m-1)

Profile
4 sides

Box
3 sides

Box
3 sides

Box
4 sides

200x200

24
0.78
11.03 65 85

20

0.78

13.09

75

100

105

85 65 65 90
80

80

105

18

0.78

14.46

85

110

115

85

85

115

16

0.78

16.18

95

125

125

95

95

130

150x150

18

0.59

14.63

85

115

115

90

90

120

15
0.59
17.36 100 135

135 105 105 140

12
0.59
21.44 125 165

170 130 130 170

10
0.59
25.51 150 200

200 155 155 205

120x120
15
0.47
17.60 105 135

140 105 105 140

12
0.47
21.69 125 170

170 130 130 175

10
0.47
25.76 150 200

200 155 155 205

8
0.47
31.87 185 250

250 190 190 255

100x100
15
0.39
17.79 105 135

140 110 110 145

12
0.39
21.86 130 170

170 130 130 175

10
0.39
25.92 150 200

205 155 155 210

8
0.39
32.00 185 250

250 195 195 260

90x90
12
0.35
22.01 130 170

175 135 135 175

10
0.35
26.07 150 200

205 160 160 210

8
0.35
32.15 190 250

250 195 195 260

7
0.35
36.48 215 285

285 220 220 295

46

These sizes are in addition to our standard range to the BS EN 10056-1 specification.

UKA

Advance UK Angles
Unequal Angles

Designation Surface area

A/V ratio (m-1)




per per
Serial
metre tonne
Profile Profile Profile Profile Profile Box Box Box Box Box
size
m2 m2
3 sides
3 sides
3 sides
3 sides
4 sides 3 sides
3 sides 3 sides 3 sides 4 sides
200x150 18

0.69

14.59

115 115 90 80 115 90 85 90 85 115

15

0.69

17.34

135 135 105 95 135 110 100 110 100 140

12

0.69

200x100
15 0.59

21.45

165 165 130 120 170 135 125 135 125 170

17.40

135 135 115 90 135 115 95

115 95 140

12

0.59

21.49

165 165 140 110 170 145 115 145 115 170

10

0.59

25.58

200 200 165 130 200 170 135 170 135 205

150x90
15 0.47

17.65

135 135 110 95 140 115 95

115 95 140

12

0.47

21.75

170 170 140 115 170 140 120 140 120 175

10

0.47

25.84

200 200 165 140 205 170 145 170 145 205

150x75
15 0.44

17.69

135 135 115 90 140 120 95

120 95 140

12

0.44

21.78

170 170 140 115 170 145 115 145 115 175

10

0.44

25.87

200 200 170 135 205 175 140 175 140 210

125x75
12

0.39

21.93

170 170 140 115 170 145 120 145 120 175

10

0.39

26.01

200 200 165 140 205 170 145 170 145 210

0.39

32.12

250 250 205 170 250 210 180 210 180 260

100x75
12

0.34

22.11

170 170 135 125 175 140 125 140 125 180

10

0.34

26.19

205 205 160 145 205 165 150 165 150 210

0.34

32.29

250 250 200 180 255 205 185 205 185 260

100x65
10

0.32

26.23

205 205 165 140 205 170 145 170 145 210

0.32

32.32

250 250 200 175 255 210 180 210 180 260

0.32

36.66

285 285 230 200 290 235 205 235 205 295

These sizes are in addition to our standard range to the BS EN 10056-1 specification.

47

Detailing and fire

Structural Tees

split from Advance UK Beams

Designation
A/V ratio (m-1)




Serial
Profile
Profile Profile Box Box Box

size
3 sides
3 sides
4 sides
3 sides
3 sides
4 sides
254x343 63 115
305x305 119

60

90

80

145
80
105

145
80
105

115

115

60

60

80

80

150
85
110

75

95

125

125

95

95

130

229x305 70

95

120

120

95

95

120

63

105

130

135

105

105

135

57

115

145

145

115

115

150

51

125

160

160

130

130

165

178x305 50

120

150

150

125

125

150

46

130

160

160

135

135

165

180

180

150

150

185

41 145
312x267 137

50

70

70

50

50

110

60

85

85

65

65

70
85

91

75

100

100

75

75

100

75

90

120

120

90

90

120

210x267

85

110

110

85

85

110

69

61

95

120

125

95

95

125

55

105

135

135

110

110

140

51

115

145

145

115

115

150

46

125

160

160

125

125

160

41 140

175

180

140

140

180

165x267

155

160

130

130

160

43

130

37

145

175

180

145

145

180

33

160

200

200

165

165

205

191x229

81

67

65
80

85
100

85
100

65

65

80

80

85
105

53

95

125

125

100

100

125

49

105

135

135

105

105

135

45

115

145

145

115

115

150

41

125

160

160

125

125

160

37

135

175

175

135

135

175

34

150

190

195

150

150

195

152x229

41

37

115

145

145

120

120

150

130

160

160

130

130

165
180

34

140

175

175

145

145

30

155

195

195

160

160

200

26

180

220

225

180

180

225

Please consult with Tata Steel for availability see page 59.

48

UKT
Designation
A/V ratio (m-1)




Serial
Profile
Profile Profile Box Box Box

size
3 sides
3 sides
4 sides
3 sides
3 sides
4 sides
178x203

43
110 140 140 110 110 145

37
125 160 160 125 125 165

34
135 175 175 140 140 180

30
150 195 195 155 155 200

27
165 215 215 170 170 220
140x203
27
160 200 200 160 160 205

23
185 230 230 185 185 235

20
215 270 270 215 215 275
171x178
34
125 160 165 125 125 165

29
145 190 190 145 145 195
26
160 210 210 160 160 215

23
180 235 240 180 180 240
127x178
20
190 235 240 195 195 245

17
220 280 280 225 225 285
165x152
27
135 185 185 140 140 185

23
160 210 215 160 160 215

20
180 240 245 185 185 245
127x152
24
140 180 180 140 140 185

21
160 200 205 160 160 210

19
180 225 230 180 180 235
102x152
17
195 240 245 200 200 245

14
225 280 280 230 230 285

13
255 315 320 255 255 320
146x127
22
145 195 200 150 150 200

19
170 225 230 170 170 235

16
195 270 270 200 200 275
102x127
14
195 250 255 200 200 260

13
220 280 285 225 225 290

11
250 320 320 255 255 325
133x102
15
175 240 245 180 180 250

13
205 285 290 210 210 295
Please consult with Tata Steel for availability see page 59.

49

Detailing and fire

UKT

Structural Tees

split from Advance UK Columns

Designation
A/V ratio (m-1)




Serial
Profile
Profile Profile Box Box Box

size
3 sides
3 sides
4 sides
3 sides
3 sides
4 sides
305x152 79 60

90

95

65

65

70

70

95

69

70

105

105

59

80

120

120

85

85

125

49

95

145

145

100

100

150

254x127 84

50

75

75

50

50

75

66

65

90

95

65

65

95

54

75

110

115

75

75

115

45

90

135

135

90

90

135

37

105

160

160

110

110

165

203x102 64

55

57 60

110

80

80

55

55

80

90

90

60

60

90

50

70

100

100

70

70

100

43

75

115

115

80

80

115

36

90

135

135

95

95

140

30

105

160

160

110

110

165

26

120

180

185

125

125

185

23

135

200

205

140

140

210

152x76 26

100

145

145

100

100

150

22

110

165

170

115

115

170

19

130

195

195

135

135

200

15

160

235

240

160

160

240

12

205

305

310

210

210

310

Please consult with Tata Steel for availability see page 59.

50

This page has been left intentionally blank.

51

Product specifications/tolerances

Product specifications/tolerances
The dimensions and mass of the following hot-rolled structural
steel sections currently produced by Tata Steel UKB, UKC,
UKBP, UKPFC - are specified in BS4-1:2005.

Rolling tolerances BS EN 10034:1993

This European Standard specifies tolerances on shape, dimensions and mass of structural steel universal beams, columns
and bearing piles.

Section height (h)

The deviation from nominal on section
height measured at the centre line of
web thickness shall be within the
tolerance given in Table 1(a).

Flange width (b)

The deviation from nominal on flange
width shall be within the tolerance given
in Table 1(b).

52

Table 1 (a) Tolerance on height and cross-section

Section height h
mm
Up to and including 180

Tolerance
mm
+3.0

-2.0

Greater than 180 up to and including 400

+4.0

-2.0

Greater than 400 up to and including 700

+5.0

-3.0

Greater than 700

5.0

Table 1 (b) Tolerance on flange widths

lange width b
F
mm
Up to and including 110

Tolerance
mm
+4.0

-1.0

Greater than 110 up to and including 210

+4.0

-2.0

Greater than 210 up to and including 325

4.0

Greater than 325

+6.0

-5.0

t*

x
b

/4

y
b

t* is measured at b/4

Web thickness (s)

The deviation from nominal on web
thickness measured at the mid-point
of dimension (h) shall be within the
tolerance given in Table 1(c)

Table 1 (c) Tolerances on web thickness

Web thickness s
mm

Tolerance
mm

Less than 7

0.7

7 up to but excluding 10

1.0

10 up to but excluding 20

1.5

20 up to but excluding 40

2.0

40 up to but excluding 60

2.5

60 and over

3.0

Flange thickness (t)

Table 1 (d) Tolerances on flange thickness

The deviation from nominal on flange

thickness measured at the quarter
flange width point shall be within the
tolerance given in Table 1(d)

Flange thickness t
mm
Less than 6.5

Tolerance
mm
+1.5

-0.5
6.5 up to but excluding 10

+2.0

-1.0
10 up to but excluding 20

+2.5

-1.5
20 up to but excluding 30

+2.5

-2.0
30 up to but excluding 40

2.5

40 up to but excluding 60

3.0

60 and over

4.0

53

Rolling tolerances

Rolling tolerances BS EN 10034:1993

Out-of-squareness (k + k1)

Web off-centre (e)

The out-of-squareness of the section

shall not exceed the maximum given in
Table 2(a).

The mid-thickness of the web shall not

deviate from the mid-width position on
the flange by more than the distance (e)
given in Table 2(b).

Table 2 (a) T
 olerance on out-of-squareness of universal beams,
columns and bearing piles

Table 2 (b) T
 olerance on web off-centre of universal beams,
columns and bearing piles

Flange width b
mm

Flange
Flange
Web off-centre
thickness t
width b
where e = b1 b2

2

mm mm mm

Tolerance
mm

Up to and including 110

1.5

Greater than 110

2% of b

(maximum 6.5mm)

t < 40

Up to and including 110

2.5

Greater than 110 up to

3.5

and including 325

Greater than 325

5.0

t 40

Greater than 110 up to

5.0

and including 325

Greater than 325

k1

k1

b1
h

54

b2

k
b

8.0

k1
b

Straightness (qxx or qyy)

Tolerance on mass

The straightness shall comply with

the requirements given in Table 3.

The deviation from the nominal mass of a batch or a piece shall not
exceed 4.0%.
The mass deviation is the difference between the actual mass of the
batch or piece and the calculated mass. The calculated mass shall be
determined using a density of 7850kg/m3.

Table 3 T
 olerance on straightness of universal beams,
columns and bearing piles
Section height h

mm

Tolerance qxx and qyy

on length L
%

Greater than 80 up to

0.30 L

and including 180

Greater than 180 up to

0.15 L

and including 360

Greater than 360

0.1 L

Tolerance on length
The sections shall be cut to ordered lengths to tolerances of:
a) 50mm
or
b) -0, +100mm where minimum lengths are required.

L represents the longest useable length of the section assuming that

the ends of the section have been cut square.

L max.

qxx

qyy

55

Rolling tolerances BS EN 10056-2:1993

This European Standard specifies tolerances on shape, dimensions and mass of hot-rolled
structural steel equal and unequal leg angles.

Leg length (a or b)

Web out-of-square (k)

The deviation from nominal on leg length

shall be within the tolerance given in
Table 1(a). For unequal leg angles the
longer leg length (a) shall be used to
determine the tolerance band.

Out-of-squareness of the section

shall not exceed the maximum
given in Table 1(c). For unequal
leg angles, the longer leg length
(a) shall be used to determine the
tolerance band.

Deviation

Deviation

Table 1 (c) Squareness tolerances

ut of square Leg length

O
mm
t
a
x

Tolerance
mm

Up to and including 100

1.0

Greater than 100 up to and including 150

1.5

Greater than 150 up to and including 200

2.0

Greater than 200

3.0

Straightness (q)
The deviation from straightness
shall not exceed the tolerances
given in Table 1(d). For unequal
leg angles, the longer leg length
(a) shall be used to determine the
tolerance band.

b
y

Table 1 (a) Dimensional tolerances

L eg length a
mm

Table 1 (d) Straightness tolerances

Tolerance
mm

Up to and including 50

1.0

Greater than 50 up to and including 100

2.0

Greater than 100 up to and including 150

3.0

Leg length
a
mm

Greater than 150 up to and including 200

4.0

Up to and

Greater than 200

+6.0

including 150

-4.0

Greater than 150 up

Tolerance Tolerance
over over any part bar length
full bar length
Deviation
Length Deviation
q
considered q
mm
mm mm
0.4% L
0.2% L

1,500
2,000

6.0
3.0

to and including 200

Greater than 200

0.1% L

3,000

3.0

Section thickness (t)

Tolerance on mass

The deviation from nominal on thickness

shall be within the tolerances given in
Table 1(b).

The deviation from the nominal mass of any individual piece shall
not exceed:
a) 6% for thickness for t 4mm or
b) 4% for thickness for t > 4mm.
The deviation from the nominal mass is the difference between the
actual mass of the piece and the calculated mass. The calculated mass
shall be determined using a density of 7850kg/m3.

Table 1 (b) Thickness tolerances

Section thickness t
mm

Tolerance
mm

Up to and including 5

0.50

Tolerance on length

Greater than 5 up to and including 10

0.75

Greater than 10 up to and including 15

1.0

Greater than 15

1.20

The tolerance on ordered length shall be either:

a) 50mm; or
b) -0, +100mm where minimum lengths are required.

56

Rolling tolerances BS EN 10279:2000

This European Standard specifies

requirements for the tolerances on
dimensions, shape and mass of hotrolled steel channels with parallel
flanges.

Table 1: Tolerances for parallel flange channels

Designation

Property Range Tolerance

mm mm mm

Height

h65

1.5

65<h200

2.0

200<h400

3.0

400<h

4.0

Flange width

b50

1.5

50<b100 2.0

100<b125 2.5

125<b 3.0

Web thickness

s10

10<s15 0.7

0.5

15<s

1.0

Flange thickness

t10

-0.5*

10<t15 -1.0*

3

2

15<t

All sizes

-0.3t

Heel radius

-1.5*

r3

Out of

b100

2.0

squareness

100<b

2.5% of b

k+k1

f
f

Web flatness

h100

100<h200 1.0

0.5

200<h400 1.5

400<h 1.5

k1

Straightness

qxx

h150

0.3% of L

150<h300

0.2% of L

xx

300<h

0.15% of L

h150

0.5% of L

qyy

qyy

150<h300

0.3% of L

300<h

0.2% of L

Standard

Length (L)

All

-0 +100

Alternative standard

Length (L)

All

50

(by agreement)

Mass per unit length

kg/m

h125

6%

125<h 4%

* Plus tolerances are limited by weight

57

This page has been left intentionally blank.

58

Tata Steel in construction

Construction is the single largest market for Tata Steel products,
accounting for over 30 per cent of turnover by value. As well as our
Advance section range, Tata Steel manufactures structural plate and
Celsius hollow sections, ComFlor composite floor decking, a full range of
cladding and roofing products including the Colorcoat and Kalzip brands,
a variety of other building products, including the Catnic brand, and
systems such as light-steel framing.
Market driven development has been key to the ongoing success of
structural steel in the UK. Working closely with our customers and
designers has led to the development of products and systems such
as Slimdek, Slimflor and Bi-Steel. Tata Steel is also committed to
improving the effective application of steel in construction. Long-term
investment in developments such as plastic design, fire engineering
and composite construction has helped position structural steel as
the preferred choice for the structural frame of industrial and multistorey buildings in the UK. Research work into acoustic performance
has resulted in Robust Details and meeting the requirements of
HTM 2045 makes steel the effective choice for health and residential
buildings alike. Significant work on steels contribution to sustainable
development is ongoing along with the production of application
guidance to help in the introduction of harmonised European design
codes and ensure that construction clients, customers and designers
are able to continue to make the most effective use of steel.

Technical support
Tata Steel operates a free technical advisory service to assist with all
aspects of the use of our products from initial material selection through
to structural design and associated issues including sustainability, fire
engineering, durability, acoustic and vibration performance. Our team
of qualified engineers have extensive experience and are on hand to
give advice on the design and construction of buildings and bridges.
In-house CPD on a wide range of topics of interest to
construction professionals can be arranged.
To find out more about the range of construction products and
systems we offer, for advice on their application or to organise
a CPD talk, contact our Construction hotline on +44 (0) 1724
405060, or visit our website at www.tatasteelconstruction.com
If your enquiry is about other products and systems
that Tata Steel manufactures, you will be directed to
the relevant business or source of expertise.
You can contact us in any of the following ways:
Construction hotline +44 (0) 1724 405060
Email: construction@tatasteel.com
Website: www.tatasteelconstruction.com
Facsimile +44 (0) 1724 404224
Address:
Tata Steel
Construction Services & Development
PO Box 1
Brigg Road
Scunthorpe
North Lincolnshire
DN16 1BP

59

www.tatasteeleurope.com

Advance, Bi-Steel, Catnic, Colorcoat, Kalzip, Slimdek, Slimflor, UKA, UKB,

UKBP, UKC, UKPFC and UKT are trademarks of Tata Steel.
While care has been taken to ensure that the information contained in this
brochure is accurate, neither Tata Steel Europe Limited, nor its subsidiaries,
accept responsibility or liability for errors or for information which is found
to be misleading.
This publication was provided by a Tata Steel approved supplier that complies
with ISO 9001, ISO 14001 and OHSAS 18001 accreditation.
Copyright 2012
Tata Steel Europe Limited
References to British Standards are in respect of the current versions and
extracts are quoted by permission of the British Standards Institute from
whom copies of the full standards may be obtained.

Tata Steel
Construction Services & Development
PO Box 1
Brigg Road
Scunthorpe
North Lincolnshire
DN16 1BP
United Kingdom
T +44(0) 1724 405060
F +44(0) 1724 404224
www.tatasteelconstruction.com
email:construction@tatasteel.com
Tata Steel Europe is registered in England under number 05957565 with registered office at 30 Millbank, London SW1P 4WY
60