Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Zebra: Assembly Instructions: Assemble The Head and Neck

    Uploaded by

    Riadh Fantar
    The document provides assembly instructions for making a paper zebra model in 3 blocks: head and neck (A parts), body (B parts), and legs and back (C parts). It instructs the reader to cut out the parts following the lines, fold along indicated lines, curl parts as shown, and glue tabs and parts together according to the diagrams and order specified for each block. The reader is advised to align seams, apply glue to back edges, and use a pencil to hold glue tabs in place while assembling.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Zebra: Assembly Instructions: Assemble The Head and Neck

    Uploaded by

    Riadh Fantar
    41 views4 pages
    The document provides assembly instructions for making a paper zebra model in 3 blocks: head and neck (A parts), body (B parts), and legs and back (C parts). It instructs the reader to cut out the parts following the lines, fold along indicated lines, curl parts as shown, and glue tabs and parts together according to the diagrams and order specified for each block. The reader is advised to align seams, apply glue to back edges, and use a pencil to hold glue tabs in place while assembling.

    Original Title

    b

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides assembly instructions for making a paper zebra model in 3 blocks: head and neck (A parts), body (B parts), and legs and back (C parts). It instructs the reader to cut out the parts following the lines, fold along indicated lines, curl parts as shown, and glue tabs and parts together according to the diagrams and order specified for each block. The reader is advised to align seams, apply glue to back edges, and use a pencil to hold glue tabs in place while assembling.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views4 pages

    Zebra: Assembly Instructions: Assemble The Head and Neck

    Uploaded by

    Riadh Fantar
    The document provides assembly instructions for making a paper zebra model in 3 blocks: head and neck (A parts), body (B parts), and legs and back (C parts). It instructs the reader to cut out the parts following the lines, fold along indicated lines, curl parts as shown, and glue tabs and parts together according to the diagrams and order specified for each block. The reader is advised to align seams, apply glue to back edges, and use a pencil to hold glue tabs in place while assembling.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Zebra : Assembly Instructions

    Page
    Canon Inc. Katsuyuki Shiga(PinoArt)

    Assemble the head and neck


    Use pattern: Page2/Page3. Cut out A1 by cutting along the lines. Cut along the line marked .
    Parts name Glue spot

    A1 Brow

    Parts No.

    Scissors line

    Cut a slot right into the apex of the triangular glue tab. Triangular glue tab

    Make a mountain fold and valley fold on A1. Trace along the mountain fold line and valler fold line with a pencil, scoring it to make it easier to fold.

    The parts will be easier to assemble if curled. Using the photo as a guide, move your fingers in the direction of the arrow, adjusting the pressure to curl the paper.

    Tools
    Scissors Paste, or woodwork glue Stencil pen, or bodkin Ruler Pencil

    Notation Key
    Scissors line Mountain fold Valley fold Glue spot Glue reverse side Parts No.

    The Assembly instructions are divided into four blocks: A (head and neck), B (body), and C (legs and back). Follow the instructions for each block to assemble your zebra. marks a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance. <Caution> Keep scissors and glue away from small children.

    Add a slight curl to A1 when attaching it. Attach the triangular glue tabs so that the front side becomes convex. Using the photo as a guide, attach in the direction of the arrow. A1 Brow

    Be careful not to cut your fingers when using scissors.

    Attach A2 and A3 together, and attach A1.

    Glue and assemble A9, A10 and A11, A12. Next, attach them to the head.

    Put glue on the edges of the back of the parts.

    Attach A5 and A6 together, and attach A4.

    Assemble A13, A14 and attach then to the Head in order.

    Put glue on the back.

    Attach A4 to the head.

    Assemble A15 and A16, attach them to the neck, and the head is complete.

    Attach A7 and A8 to the head.


    Put glue on the edges of the back of the parts.

    Zebra : Assembly Instructions

    Page
    Canon Inc. Katsuyuki Shiga(PinoArt)

    Assemble the body


    Use pattern: Page4/Page5. Assemble B1 and B2, and attach it to the neck.
    Align the seams on each part.

    Align the seams on each part.

    Assemble parts C5/C6/C7/C8 in the same way.

    Attach B3 and B4 together, and attach B1, B2.

    Attach these legs to the shoulders.

    Assemble the legs and back


    Use pattern: Page6 to Page8. Assemble parts C1/C2/C3/C4, and attach them in order.

    Make sure all the glue tabs are tucked inside.

    Attach the right foreleg in the same way.

    Assemble C9 to B3.

    When assembling the legs, put glue on the edges of the back of the parts too.

    Align the seams on each part.

    Use a pencil to hold down the glue tabs inside.

    Zebra : Assembly Instructions


    Assemble C10 and C11, and attach to the body. Next, assemble C12.

    Page
    Canon Inc. Katsuyuki Shiga(PinoArt)

    In the same way, assemble C17, and C18, C19 and C20, and attach them to the body.

    Assemble C21, C22, C23 and C24. Place the hooves on the ground, without adding any glue. Attach the body to the hooves, taking care to balance it so that it is straight.

    Assemble C13, and attach it to C10.

    Align the seams on each part. When assembling the legs,put glue on the edges of the back of the parts too.

    Assemble C14, C15 and C16, and attach them together in order. Next, attach them to C13.
    Align the seams on each part.

    Align the seams on each part.

    Put glue on the edges of the back of the parts.

    Assemble C25, and attach to the body, and your zebra is complete!

    When assembling the legs, put glue on the edges of the back of the parts too.

    Use a pencil to hold down the glue tabs inside.

    Align the seams on each part.

    You might also like