Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 319 views

    MRC Pylon Racer PDF

    Uploaded by

    Alexandra Spătărelu
    This document provides instructions for building an intermediate or advanced RC plane called the Pylon Racer. It includes a list of required materials, templates to cut out parts of the plane, and details on electronics, assembly instructions, and setup.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    MRC Pylon Racer PDF

    Uploaded by

    Alexandra Spătărelu
    319 views16 pages
    This document provides instructions for building an intermediate or advanced RC plane called the Pylon Racer. It includes a list of required materials, templates to cut out parts of the plane, and details on electronics, assembly instructions, and setup.

    Original Description:

    pylon racer macheta plan

    Original Title

    MRC_Pylon_Racer.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for building an intermediate or advanced RC plane called the Pylon Racer. It includes a list of required materials, templates to cut out parts of the plane, and details on electronics, assembly instructions, and setup.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    319 views16 pages

    MRC Pylon Racer PDF

    Uploaded by

    Alexandra Spătărelu
    This document provides instructions for building an intermediate or advanced RC plane called the Pylon Racer. It includes a list of required materials, templates to cut out parts of the plane, and details on electronics, assembly instructions, and setup.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 16

    This is an INTERMEDIATE or ADVANCED RC plane.

    www.MikeysRC.com Pylon Racer


    **PRINT ONLY THIS PAGE FIRST** to check that the printed scale is correct. The black line below should be five inches long. If it measures to 5 inches then print the rest of the pages. If the black line does NOT measure to 5 inches make sure that Page Scaling is turned OFF in your printers setting box. *You will need to trim any side of a page that has the red guide lines. Just trim right up to the lines. These lines should match up exactly and will be 3 inches long.

    PDF NOTES and TIPS

    Print scale 5 inches

    Build Materials

    *3/16th or 1/4 inch Foamboard for the fuselage, wings and tail. I reccomend using foamboard from the Dollar Tree stores as its 1/2 the weight of other foam board and just about as strong. About 1 20 X 30 inch sheet of board is needed. The company that makes this foam board is http://www.adamsplasticsinc.com/ *1/16 galvanized steel on a roll (from a hardware store) or RC pushrods, about 38 inches are needed OR you can use RC pushrods if you have them. *Hot glue(prefered) or 5 min epoxy. *Thick packing tape for control surface hinges and wing stiffening. *About 29 inches of 1/4 inch diameter wooden dowel. *4 regular size popsicle sticks. *About 2 wide tounge depressors. for belly skids and motor mount.

    *All electronics available from www.hobbypartz.com *1 - 14.8V 4 cell 1600 -2200mAh 20C li-po battery. *1 - 2600 - 2700KV 78 gram brushless motor. *1 - 60 amp ESC. *3 - 9 gram servos. *1 - 4.5 X 4.5 high speed prop.

    Plane Electronics Requirements

    Visit www.hobbypartz.com for all your RC parts needs!

    Template pieces for your reference.

    *FOR DETAILED VIDEO INSTRUCTIONS ON HOW TO ASSEMBLE THIS PLANE VISIT http://WWW.YOUTUBE.COM/MIKEYSRC

    Mikeys RC Pylon Racer

    COPYRIGHT 2011 MikeysRC Do NOT Redistribute

    Tail / r u d d e r p i e c e C . u t o u t o n e o f t h e s e .

    www.MikeysRC.com

    www. Mikey sRC.co m

    Fuselage / plane bottom cut out one of these.

    www.M ik

    eysRC.c om

    Tail / Elevator. Cut out one of these.

    um C For your rum l eysR l Mik rt with al om/rc-fo fficia c o the o ore supp mikeysrc. Visit // ven m ns. http: for e o uesti RC q

    *FOR DETAI LED V HOW IDEO TO AS INSTR SEMB http:/ UCTIO LE TH /WWW NS ON IS PLA .YOUT NE VIS UBE.C IT OM/M IKEYS RC

    Fuselage top cover. Cut out one of these and cut out the access door in the middle.

    Fuselage side front piece. Cut out two of these.

    www.MikeysRC.com

    Set elevator deflection (measured here) to; High rate - 0.7 inches up / 0.3 inches down Low rate - 0.55 inchs up / 0.3 inches down

    Glue wing spar here. Use 29 inches of 1/4 inch wooden dowl (or carbon fiber) to span across the entire wing..

    CG window. Plane needs to balance level nose to tail when held between these lines.

    rum o F C R eys ur k i o y M l l l a a um h ci r i t f i o f f w o c t r e r / Visit th more suppo ikeysrc.com n m for eve ions. http:// st RC que

    Main wing piece. Cut out two of these and glue them together to make one long wing span.

    www.MikeysRC.com
    COPYRIGHT 2011 MikeysRC Do NOT Redistribute
    Set aileron deflection (measured here) to; High rate - 0.5 inches up / down Low rate - .25 inches up / down

    *FO R DE HOW TAIL E T D VI O http A ://W SSEM DEO IN BLE WW S T .YOU HIS TRUCTI PLA ONS TUB NE V E.CO ON I SIT M/M IKEY SRC

    Fuselage side rear piece. Cut out two of these.

    Vis for it the RC even offic ial qu m est ore Mik ion su eys p s. h p RC o ttp rt w Fo ://m it rum ike h all ysr yo c.c ur om /rc -fo ru m

    You might also like