Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Experiment 9 Young S Modulus

    Uploaded by

    Thämäíyänthí Rätnäm
    This experiment aims to determine Young's modulus, a measure of the stiffness of a material, using the cantilever method. A meter rule is clamped at one end and hung with increasing slotted masses at the other end, measuring the resulting deflection. A graph of deflection versus mass is plotted and the slope is used to calculate Young's modulus. It was found that increasing the mass increased the deflection, as hypothesized.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Experiment 9 Young S Modulus

    Uploaded by

    Thämäíyänthí Rätnäm
    2K views4 pages
    This experiment aims to determine Young's modulus, a measure of the stiffness of a material, using the cantilever method. A meter rule is clamped at one end and hung with increasing slotted masses at the other end, measuring the resulting deflection. A graph of deflection versus mass is plotted and the slope is used to calculate Young's modulus. It was found that increasing the mass increased the deflection, as hypothesized.

    Original Description:

    fizik

    Original Title

    Experiment 9 Young s Modulus

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This experiment aims to determine Young's modulus, a measure of the stiffness of a material, using the cantilever method. A meter rule is clamped at one end and hung with increasing slotted masses at the other end, measuring the resulting deflection. A graph of deflection versus mass is plotted and the slope is used to calculate Young's modulus. It was found that increasing the mass increased the deflection, as hypothesized.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views4 pages

    Experiment 9 Young S Modulus

    Uploaded by

    Thämäíyänthí Rätnäm
    This experiment aims to determine Young's modulus, a measure of the stiffness of a material, using the cantilever method. A meter rule is clamped at one end and hung with increasing slotted masses at the other end, measuring the resulting deflection. A graph of deflection versus mass is plotted and the slope is used to calculate Young's modulus. It was found that increasing the mass increased the deflection, as hypothesized.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    EXPERIMENT 9

    Topic

    : Deformation of Solid

    Aim

    : To determine Youngs modulus by cantilever method

    Theory

    A cantilever is a beam supported on only one end. The beam carries the load to the support where it is resisted by moment and shear stress. Cantilever construction allows for overhanging structures without external bracing. In most applications, objects are assumed to be rigid for the purpose of simplification. When supposedly rigid materials are subject to great forces, there is a permanent deformation. When subject to a particular stress, or force per unit area, materials will respond with a particular strain, or deformation. If the stress is small enough, the material will return to its original shape after the stress is removed, exhibiting its elasticity. If the stress is greater, the material may be incapable of returning to its original shape, causing it to be permanently deformed. At some even greater value of stress, the material will break. There are different types of stress: tension or tensile stress, compression or compressive stress, shear stress, and hydraulic stress. The quantity for all types of stress, however, can be defined as follows: 

    where F is the force applied and A is the cross-sectional area of the material. The standard units of stress are [N/m2]. The quantity strain can be defined as follows:  

    where L is the original length of the material, and L is the change in length that results after the stress is applied. The Youngs modulus E of wood of the meter rule is given by   where M = mass of the slotted mass, d = deflection of the end of the ruler.  

    s = gradient of graph d against M Hypothesis :

    When the mass of the slotted mass increased, the deflection of the end of the ruler is also increased.

    Variables :

    Manipulated Responding Fixed

    : Mass of slotted mass, M/g : Deflection of the end of the ruler, d/cm : Type of slotted mass

    Apparatus/Materials :

    1. Meter rule 2. A half-meter rule 3. A G-clamp 4. A retort stand and clamp 5. Thread 6. A 50 g slotted mass hanger 2

    7. A set of 50 g slotted masses 8. A wooden block 9. A pair of vernier calipers 10. A micrometer screw gauge 11. A scissors

    Procedure :

    Figure 1

    1. The average thickness of the meter rule is measured by using a vernier caliper and the reading is recorded. 2. By using a micrometer screw gauge, the average width of the meter rule is measured and the reading is recorded. 3. The apparatus is set up as shown in figure 1. 4. A 10 g of slotted mass is hung and the length of the deflection is observed. 5. The reading obtained is tabulated in a table. 6. Step 4 and 5 is repeated by using a slotted mass of 20 g, 30 g, 40 g, 50 g and 60 g. 3

    7. A graph of deflection of the end of the ruler, d against mass, M is plotted. 8. The Youngs modulus, E of wood of the meter rule is calculated.

    Precaution taken : 1. The load should not be too high off the floor. 2. Place you eye in front of the metre rule to get precise reading.

    Data and Observation :

    a) Reading of the thickness and width of the meter rule

    b) Reading of the mass of the slotted mass, M and the deflection of the end of the ruler, d

    Conclusion : The hypothesis made is accepted. When the mass of the slotted mass increased, the deflection of the end of the ruler is also increased.

    You might also like