z/OS Communications Server


Quick Reference
Version 1 Release 7

SX75-0124-05
z/OS Communications Server


Quick Reference
Version 1 Release 7

SX75-0124-05
 Note:
Before using this information and the product it supports, be sure to read the general information under “Notices” on page
207.

Sixth Edition (September 2005)

This edition applies to Version 1 Release 7 of z/OS (5694-A01) and Version 1 Release 7 of z/OS.e (5655-G52) and to
all subsequent releases and modifications until otherwise indicated in new editions.
IBM welcomes your comments. You may send your comments to the following address.
International Business Machines Corporation
Attn: z/OS Communications Server Information Development
Department AKCA, Building 501
P.O. Box 12195, 3039 Cornwallis Road
Research Triangle Park, North Carolina 27709-2195
You can send us comments electronically by using one of the following methods:
Fax (USA and Canada):
1+919-254-4028
Send the fax to “Attn: z/OS Communications Server Information Development”
Internet e-mail:
comsvrcf@us.ibm.com
World Wide Web:
http://www.ibm.com/servers/eserver/zseries/zos/webqs.html
If you would like a reply, be sure to include your name, address, telephone number, or FAX number. Make sure to
include the following in your comment or note:
v Title and order number of this document
v Page number or topic related to your comment
When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any
way it believes appropriate without incurring any obligation to you.
© Copyright International Business Machines Corporation 1984, 2005. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
 Contents
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Part 1. IP commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Chapter 1. IP MVS operator commands . . . . . . . . . . . . . . . . . . . . . . 3

DISPLAY TCPIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
DISPLAY TCPIP HELP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
DISPLAY TCPIP NETSTAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
DISPLAY TCPIP OMPROUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
DISPLAY TCPIP STOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
DISPLAY TCPIP SYSPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
DISPLAY TCPIP TELNET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
MODIFY TCPIP command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
FTP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
| IKE server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
NCPROUTE server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
OMPROUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Policy Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Resolver address space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
REXEC server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Network SLAPM2 subagent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SLA subagent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SNALINK LU0 server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SNALINK LU6.2 server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SNMP agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
TRAPFWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
VMCF and TNF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
X.25 NPSI server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
| z/OS Load Balancing Advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
| z/OS Load Balancing Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
START TCPIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
STOP TCPIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
VARY TCPIP ABENDTRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
VARY TCPIP DATTRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
VARY TCPIP DROP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
VARY TCPIP OBEYFILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
VARY TCPIP PKTTRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
VARY TCPIP PURGECACHE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
VARY TCPIP START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
VARY TCPIP STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
VARY TCPIP SYSPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
VARY TCPIP TELNET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Chapter 2. TSO Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

DIG Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
FTP Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
! Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ACCOUNT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
APPEND Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ASCII Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BIG5 Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BINARY Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

© Copyright IBM Corp. 1984, 2005 iii

 BLOCK Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CD Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CDUP Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
CLOSE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
COMPRESS Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DEBUG Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DELETE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DELIMIT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DIR Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
EBCDIC Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
EUCKANJI Subcommand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
FILE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
GET Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
GLOB Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
HANGEUL Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
HELP and ? Subcommands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
IBMKANJI Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
JIS78KJ Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
JIS83KJ Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
KSC5601 Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
LCD Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
LMKDIR Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
LOCSITE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
LOCSTAT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LPWD Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LS Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
MDELETE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
MGET Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
MKDIR Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
MODE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
MPUT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
NOOP Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
OPEN Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PASS Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PROMPT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PROXY Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PUT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PWD Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
QUIT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
QUOTE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
RECORD Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
RENAME Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
RESTART Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
RMDIR Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
SCHINESE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
SENDPORT Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
SENDSITE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SITE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SJISKANJI Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
STATUS Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
STREAM Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
STRUCTURE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
SUNIQUE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
SYSTEM Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TCHINESE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TSO Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
TYPE Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
UCS2 Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
USER Subcommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
GDDMXD Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Identifying the Target Display Option . . . . . . . . . . . . . . . . . . . . . . . . . 44

iv z/OS V1R7.0 Comm Svr: Quick Reference

 ANFontn Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
CMap Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Compr Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Enter Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
GColornn Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Geometry Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
GMCPnn Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
HostRast Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
NewLine Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
XSync Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
ZWL Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
HOMETEST Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
KDESTROY Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
KINIT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
KLIST Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
KPASSWD Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LPQ Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LPR Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
LPRM Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
LPRSET Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MAKESITE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
NDBCLNT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
NETSTAT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
NSLOOKUP Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
PING Command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
REXEC Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
RPCINFO Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
RSH Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
SMSG SMTP Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
SMTPNOTE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
TELNET Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
AO Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
AYT Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
BRK Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
HELP Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
IP Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
PA1 Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
QUIT Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SYNCH Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
¢ and ` Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Terminal and Conversion Type Option . . . . . . . . . . . . . . . . . . . . . . . . . 60
TESTSITE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
TRACERTE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chapter 3. z/OS UNIX Commands . . . . . . . . . . . . . . . . . . . . . . . . 63

dig Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
dnsdomainname Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
dnssec-keygen Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
dnssec-makekeyset Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
dnssec-signkey Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
dnssec-signzone Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
dnsmigrate Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
ftp Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
host Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
hostname Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
ipsec Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
mailstats Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
named Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
nsupdate Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
netstat Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
onslookup/nslookup Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Contents v
 ping Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
orexec/rexec Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
orpcinfo/rpcinfo Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
osnmp/snmp Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
otracert/traceroute Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
pasearch Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
popper Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
pwchange Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
pwtokey Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
rndc Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
rndc-confgen Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
sendmail Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
sntpd Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
trmdstat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Chapter 4. Other IP commands, options, and subcommands . . . . . . . . . . . . 87

Part 2. VTAM commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Chapter 5. Display commands. . . . . . . . . . . . . . . . . . . . . . . . . . 91

D ADJCLUST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
D ADJCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
D ADJSSCPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
D APING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
D APINGDTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
D APINGTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
D APPLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
D APPNTOSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
D AUTOLOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
D BFRUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
D BNCOSMAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
D CDRMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
D CDRSCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
D CLSTRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
D CNOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
D CONVID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
D COS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
D CPCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
D CSDUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
D CSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
D CSMUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
D DIRECTRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
D DISK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
D DLURS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
D EE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
| D EEDIAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
D EXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
D GRAFFIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
D GROUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
D ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
D INOPCODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
D INOPDUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
D LINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
D LMTBL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
D LUGROUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
D MAJNODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
D MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
D NCPSTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
D NETSRVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
D PATHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

vi z/OS V1R7.0 Comm Svr: Quick Reference

 D PATHTAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
D PENDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
D ROUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
D RSCLIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
D RTPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
D SAMAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
D SATOAPPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
D SESSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
D SNSFILTR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
D SRCHINFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
D STATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
D STATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
D STORUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
D TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
D TERMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
D TGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
D TNSTAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
D TOPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
D TRACES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
D TRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
D TSOUSER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
D USERVAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
D VTAMOPTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
D VTAMSTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Chapter 6. Halt commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

HALT (Z) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Z CANCEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Z QUICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Chapter 7. Modify commands . . . . . . . . . . . . . . . . . . . . . . . . . 129

F ALSLIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
F APINGDTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
F APINGTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
F BFRUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
F CDRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
F CHKPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
F CNOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
F COMPRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
F CSALIMIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
F CSDUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
F CSM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
F DEFAULTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
F DEFINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
F DIRECTRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
F DR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
F DUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
F ENCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
F EXIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
| F GR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
F IMR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
F INOPCODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
F INOPDUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
F IOPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
F IOPURGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
F LINEDEF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
F LL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
F LOAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
F MSGMOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
F NCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Contents vii
 F NEGPOLL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
F NOTNSTAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
F NOTRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
F POLL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
F PPOLOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
F PROFILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
F RESOURCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
F RTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
F SECURITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
F SESSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
F SUPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
F TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
F TGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
F TNSTAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
F TOPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
F TRACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
F USERVAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
F VTAMOPTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

Chapter 8. Starting VTAM . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Chapter 9. Vary commands . . . . . . . . . . . . . . . . . . . . . . . . . . 171

V ACQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
V ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
V ANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
| V AUTOLOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
| V CFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
V DIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
V DRDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
V HANGUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
V INACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
V INOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
V LOGON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
V NOLOGON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
V PATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
V REL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
V TERM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

Chapter 10. Start options . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Chapter 11. Other VTAM codes and commands . . . . . . . . . . . . . . . . . . 201

Part 3. Appendixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Appendix. Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

Using assistive technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Keyboard navigation of the user interface . . . . . . . . . . . . . . . . . . . . . . . . . 205
z/OS information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

viii z/OS V1R7.0 Comm Svr: Quick Reference

Tables
1. IP commands, options, and subcommands . . . . . . . . . . . . . . . . . . . . . . . 87
2. Other VTAM codes and commands . . . . . . . . . . . . . . . . . . . . . . . . . 201

© Copyright IBM Corp. 1984, 2005 ix

x z/OS V1R7.0 Comm Svr: Quick Reference
About this document
This quick reference summarizes information found in:
v z/OS Communications Server: IP Configuration Guide
v z/OS Communications Server: IP System Administrator’s Commands
v z/OS Communications Server: SNA Operation

The information in this document includes descriptions of support for both IPv4
and IPv6 networking protocols. Unless explicitly noted, descriptions of IP protocol
support concern IPv4. IPv6 support is qualified within the text.

This document is provided as a source of commonly used operation information

for experienced system programmers and operators, and it contains information
on:
v IP MVS™ Operator commands
v VTAM® commands
v VTAM start options

Use the table of contents to locate the reference information you need. For more
detailed information, refer to the document listed at the start of each section.

This document supports z/OS.e.

© Copyright IBM Corp. 1984, 2005 xi

xii z/OS V1R7.0 Comm Svr: Quick Reference
Part 1. IP commands
In this section, commands are listed alphabetically. For more information on these
commands, refer to z/OS Communications Server: IP Configuration Guide and z/OS
Communications Server: IP System Administrator’s Commands.

© Copyright IBM Corp. 1984, 2005 1

IP commands

2 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 1. IP MVS operator commands
DISPLAY TCPIP
Display the status of the current TCP/IP images:

This is the general format of the DISPLAY command used to display the status of
the current TCP/IP images.

DISPLAY TCPIP

D

This is the format of DISPLAY command used to display information about

TCP/IP applications.

DISPLAY TCPIP, ,APPL=applid,CMD=CLIENT


D procname

DISPLAY TCPIP HELP

Display the syntax of MVS operator commands for TCP/IP:

© Copyright IBM Corp. 1984, 2005 3

 IP MVS operator commands

| ,HElp


Display TCPIP , ,HElp

procname ,Display
,Vary
,Obeyfile
,DATtrace
,PKTtrace
,PURGECache
,STArt
,STOp
,STOR
,Netstat
,ACCess
,ALLConn
,ARp
,BYTEinfo
,CACHinfo
,CONFIG
,COnn
,DEvlinks
,DRop
,HOme
,IDS
,ND
,PORTList
,ROUTe
,SOCKets
,SRCIP
,STATS
,TTLS
,VCRT
,VDPT
,VIPADCFG
,VIPADyn
,OMProute
,OSPF
,RIP
,GENERIC
,RTTABLE
,IPV6OSPF
,IPV6RIP
,GENERIC6
,RT6TABLE
,SYSplex
,LEAVEGROUP
,JOINGROUP
,DEACTIVATE
,REACTIVATE
,Telnet
,ACT
,APPL
,COnnection
,INACT
,INACTLUS
,LINKname
,PROFile
,QUIesce
,RESUME
,WLm
,WHEREused

DISPLAY TCPIP NETSTAT

Request NETSTAT information:

Display TCPIP , ,

procname

4 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

|
Netstat, ACCess,NETWork

,ipaddr
(1) (2) (3) (4) (5)
ALLConn
ARp
,netaddr
(1) (3) (4)
BYTEinfo
,IDLETIME
CACHinfo
CONFIG
(1) (2) (3) (4) (5)
COnn
(6)
DEvlinks
(6)
HOme
,SUMmary (7)
IDS
,PROTOcol=protocol
(3)
ND
(2)
PORTList
(3)
ROUTe
,ADDRTYPE= IPV4
IPV6
,DETAIL
,IQDIO
,RSTAT
(1) (2) (3) (4)
SOCKets
SRCIP
(8)
STATS
,PROTOcol=protocol
,GRoup
TTLS
,COnn=connid
,DETAIL
,GRoup
,DETAIL
(2) (3)
VCRT
,DETAIL
(2) (3)
VDPT
,DETAIL
(3)
VIPADCFG
VIPADyn
,DVIPA
,VIPAROUTE

Chapter 1. IP MVS operator commands 5

 IP MVS operator commands

|


(1)
,CLIent=client
(2)
,POrt=portnum
(3)
,IPAddr= ipaddr
ipaddr/prefixLen
ipaddr/subnetmask
(4)
,NOTN3270
(6)
,INTFName=intfname
(5)
,CONNType= NOTTLSPolicy
TTLSPolicy
,CURRent
,GRoup=groupid
,STALE

,MAX=100 (9)



,FORMat= LONG ,MAX=*
SHORT ,MAX=recs

Notes:
1 The CLIent is valid with ALLConn, BYTEinfo, COnn, and SOCKets.
2 The POrt is valid only with ALLConn, COnn, PORTList, SOCKets, VCRT, and
VDPT.
| 3 The IPAddr select string is valid only with ALLConn, BYTEinfo, COnn, ND,
| ROUTe, SOCKets, VCRT, VDPT, and VIPADCFG.
4 The NOTN3270 is valid only with ALLConn, BYTEinfo, COnn, and SOCKets.
| 5 The CONNType is valid only with ALLConn and COnn.
6 The INTFName is valid only with DEvlinks and HOme.
7 The valid protocol values are TCP and UDP.
8 The valid protocol values are IP, ICMP, TCP, and UDP.
9 MAX limits the number of records displayed to the MVS operator’s console.

Note: The minimum abbreviation for each parameter is shown in uppercase

letters.

DISPLAY TCPIP OMPROUTE

Display OMPROUTE configuration and state information:

Display TCPIP , ,OMProute

procname

6 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

|
,OSPF OSPF options


,RIP RIP options
,GENERIC GENERIC options
,RTTABLE
,DEST=ip_addr
,IPV6OSPF IPv6 OSPF options
,IPV6RIP IPv6RIP options
,GENERIC6 GENERIC6 options
,RT6TABLE
,DEST=ip_addr
ip_addr/prefixlen

OSPF options:

,LIST ,ALL
,AREAS
,InterFaceS
,NBMA
,NeighBoRS
,VLINKS
LSA command
,AREASUM
,EXTERNAL
,DATABASE
,AREAID=area_id
,DBSIZE
,InterFace
,NAME=if_name
,NeighBoR
,IPADDR=ip_addr
,ROUTERS
,STATiStics

LSA command:

,LSA ,LSTYPE=ls_type ,LSID=lsid ,ORIGinator=ad_router

,AREAID=area_id

RIP options:

,LIST ,ALL
,InterFaceS
,ACCEPTED
,InterFace
,NAME=if_name
FILTERS

GENERIC options:

,LIST ,ALL
,InterFaceS
,InterFace

Chapter 1. IP MVS operator commands 7

 IP MVS operator commands

IPv6 OSPF options:

| ,ALL
,AREASUM
,InterFace
,NAME=if_name
,ID=if_id
,VLINK
,ENDPT=router-id
,NeighBoR
,ID=router-id
,IFNAME=if_name
,DBSIZE
IPv6 LSA command
,EXTERNAL
,DATABASE
,AREAID=area_id
,ROUTERS
,STATiStics

IPv6 LSA command:

| ,LSA ,LSTYPE=ls_type ,LSID=lsid ,ORIGinator=ad_router

|

,AREAID=area_id ,IFNAME=if_name

IPv6RIP options:

,ALL
,ACCEPTED
,InterFace
,NAME=if_name
,FILTERS

GENERIC6 options:

,ALL
,InterFace
,NAME=if_name

DISPLAY TCPIP STOR

Display TCP/IP storage usage information or the service level of a TCP/IP
module:

Display TCPIP , , STOR


procname , MODule= modname_name

8 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

DISPLAY TCPIP SYSPLEX

Request SYSPLEX information:

Display TCPIP , ,

procname

,MAX=100 (1)

SYSplex , VIPADyn

,IPAddr= ipaddr ,MAX=*
,INTFName= intfname ,MAX=recs

Notes:
1 MAX limits the number of records displayed to the MVS operator’s console.

DISPLAY TCPIP TELNET

CLIENTID display command:

Display TCPIP , Telnet , CLientID

procname ,

,POrt=ALL ,PROFile=CURRent



,POrt=num ,PROFile=prfid ,TYPE=clidtype
,POrt=num1..num2 ,PROFile=ACTive ,TYPE=WU
,POrt=num,qual ,PROFile=ALL
,PROFile=Basic
,PROFile=Secure

,DETail ,MAX=100



,ID=clidname ,SUMmary ,MAX=nn|*

CONNECTION display command:

DISPLAY TCPIP , Telnet , CONNection

procname ,

,POrt=ALL ,PROFile=ALL



,POrt=num ,PROFile=prfid
,POrt=num1..num2 ,PROFile=ACTive
,POrt=num,qual ,PROFile=CURRent
,PROFile=Basic
,PROFile=Secure

Chapter 1. IP MVS operator commands 9

IP MVS operator commands

,MAX=100



,DETail ,MAX=nn|*
,COnn=connid
,IPPort=ipaddr..port ,SUMmary
,LUName=luname
,NOHname
,LUName=luname*
,APPL=applname|applname* ,HName
,TCPipjobname=tcpip
,IPAddr= ipaddr
ipv4mask:ipv4subnet
ipv6addr/prefixlen
,LUGroup=lugroupname
,IPGroup=ipgroupname
,PROTOcol=protocol mode
,HName
,HName=*hostname
,HNGroup=hngroupname ,NOHname

DEVICETYPE display command:

Display TCPIP , Telnet , DEVicetype

procname ,

,POrt=ALL ,PROFile=CURRent ,MAX=100


,POrt=num ,PROFile=prfid ,MAX=nn|*
,POrt=num..num2 ,PROFile=ACTive
,PROFile=ALL
,PROFile=Basic
,PROFile=Secure

INACTLUS display command:

,MAX=100


DISPLAY TCPIP , Telnet , INACTLUS

procname , ,MAX=nn|*

PROFILE display command:

DISPLAY TCPIP , Telnet , PROFile

procname ,

,POrt=ALL ,PROFile=CURRent SUMmary ,MAX=100


,POrt=num ,PROFile=prfid DETail ,MAX=nn|*
,POrt=num1..num2 ,PROFile=ACTive
,POrt=num,qual ,PROFile=ALL
,PROFile=Basic
,PROFile=Secure

OBJECT display command:

10 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

DISPLAY TCPIP , Telnet , OBJect

procname ,

,POrt=ALL ,PROFile=CURRent



,POrt=num ,PROFile=prfid ,TYPE=objtype
,POrt=num1..num2 ,PROFile=ACTive ,TYPE=WU
,POrt=num,qual ,PROFile=ALL
,PROFile=Basic
,PROFile=Secure

,DETail ,MAX=100



,ID=objname ,SUMmary ,MAX=nn|*

WLM display command:

,POrt=ALL


DISPLAY TCPIP , Telnet , WLM

procname , ,POrt=num
,POrt=num..num2
,POrt=Basic
,POrt=Secure

,MAX=100



,MAX=nn|*

MODIFY TCPIP command

Dynamically change characteristics of an active task:

MODIFY procname , parameter


F

FTP server
Start and stop tracing after initialization is complete:

Chapter 1. IP MVS operator commands 11

 IP MVS operator commands

MODIFY jobname , DEBug = (  ,

F ?
ACC
ALL
BAS
CMD
FLO
FSC(n)
INT
JES
NONE
PAR
SEC
SOC(n)
SQL
UTL
(1)
Xyyy

DUmp = (  ,
?
n
ALL
FSC
JES
NONE
SOC
SQL
(1)
Xyyy

USERID(filter_name) )

IPADDR(filter)

Notes:
1 Prepend any option yyy with X to turn off that trace.

| IKE server
| Control IKE server functions:

| MODIFY procname,DISPLAY
F
|

| MODIFY procname,REFRESH
F ,FILE=’filename’
,FILE=//’filename’
|

12 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

| NCPROUTE server
Pass parameters to the NCPROUTE address space:

MODIFY procname , PARMS=parms ,C=client


F QUERY PROFILE
GATEWAYS
GATEWAYS,DELETE
TABLES

OMPROUTE
Control OMPROUTE from the operator’s console:

MODIFY procname ,

F

|
KILL

RECONFIG
ROUTESA= ENABLE
DISABLE
TRACE=trace_level
DEBUG=debug_level
TRACE6=trace6_level
DEBUG6=debug6_level
SADEBUG=sadebug_level
OSPF OSPF options
RIP RIP options
GENERIC GENERIC options
RTTABLE
,DEST=ip_addr
IPV6OSPF IPv6 OSPF options
IPV6RIP IPv6 RIP options
GENERIC6 GENERIC6 options
RT6TABLE
,DEST=ip_addr
ip_addr/prefixlen

Chapter 1. IP MVS operator commands 13

IP MVS operator commands

OSPF options:

,LIST ,ALL
,AREAS
,InterFaceS
,NBMA
,NeighBoRS
,VLINKS
LSA command
,AREASUM
,EXTERNAL
,DATABASE
,AREAID=area_id
,DBSIZE
,InterFace
,NAME=if_name
,NeighBoR
,IPADDR=ip_addr
,ROUTERS
,STATiStics
,WEIGHT ,NAME=name ,COST=cost

LSA command:

,LSA ,LSTYPE=ls_type ,LSID=lsid

,ORIGinator=ad_router
,AREAID=area_id

RIP options:

,LIST ,ALL
,InterFaceS
,ACCEPTED
,InterFace
,NAME=if_name
FILTERS

GENERIC options:

,LIST ,ALL
,InterFaceS
,InterFace

IPv6 OSPF options:

14 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

| ,ALL
,AREASUM
,InterFace
,NAME= if_name
,ID= if_id
,VLINK
,ENDPT=router-id
,NeighBoR
,ID=router-id
,IFNAME=if_name
,DBSIZE
IPv6 LSA command
,EXTERNAL
,DATABASE
,AREAID=area_id
,ROUTERS
,STATiStics
,WEIGHT ,NAME=name ,COST=cost

IPv6 LSA command:

| ,LSA ,LSTYPE=ls_type ,LSID=lsid ,ORIGinator=ad_router

,AREAID=area_id ,IFNAME=if_name

IPv6 RIP options:

,ALL
,ACCEPTED
,InterFace
,NAME=if_name
,FILTERS

GENERIC6 options:

,ALL
,InterFace
,NAME=if_name

Policy Agent
Control the Policy Agent functions from the operator’s console using the MODIFY
command:

|

MODIFY procname , LOGLEVEL , LEVEL=n


F TRACE , LEVEL=t
DEBUG , LEVEL=d
MEMTRC
QUERY
REFRESH
UPDATE

Chapter 1. IP MVS operator commands 15

IP MVS operator commands

Resolver address space

Request the resolver address space to display or refresh its setup information:

MODIFY procname ,

F Display
REFRESH
,SETUP= xxx
xxx(yyy)
’/xxx’

REXEC server
Change the parameters on the Remote Execution server:

MODIFY procname , , ,

F EXIT=exitmod TSOPROC=proc

, , ,

MSGCLASS=c PURGE= Yes TSCLASS=c
No


TRACE= LOG
NOLOG
SEND
NOSEND
CLIENT=client
ALLCLIENTS

RESET

Network SLAPM2 subagent

Control the Network SLAPM2 subagent functions from the operator’s console
using the MODIFY command:

MODIFY procname , Debug,Level=n


F Cache,Time=t
Query

SLA subagent
Control the SLA subagent functions:

MODIFY procname , Trace,Level=n


F Query

SNALINK LU0 server

Halt the SNALINK LU0 interface:

MODIFY procname ,

F

16 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

HALT

LINKNAME=*
PKTTRACE pkttrace_options
ON LINKNAME=link_name
OFF
CLEAR
LIST

SNALINK LU6.2 server

Stop or restart the SNALINK LU6.2 interface and control tracing:

MODIFY procname ,

F


CANCEL
DROP IP=dest_ip
LU=dest_lu
ALL
HALT
ACTIVE
LIST
IP=dest_ip
LU=dest_lu
ALL
LINKNAME=*
PKTTRACE ON pkttrace_options
OFF LINKNAME=link_name
CLEAR
LIST
INIT
RESTART
IP=dest_ip
LU=dest_lu
ALL
ON
TRACE IP=dest_ip
OFF ALL
DETAIL

SNMP agent
Modify some SNMP agent initialization parameters:

MODIFY snmp_agent_jobname, INTERVAL=n


F TRACE, LEVEL=n
QUERY

TRAPFWD
Modify the trap forwarder daemon:

MODIFY trap_daemon_jobname, REFRESH


F TRACE, QUERY
LEVEL=n

Chapter 1. IP MVS operator commands 17

 IP MVS operator commands

VMCF and TNF

Display the names of current users of VMCF and TNF and remove names from the
name lists:

MODIFY VMCF, DISPLAY, NAME= name


F TNF, REMOVE, *

X.25 NPSI server

Pass parameters to the X.25 NPSI server:

MODIFY procname ,

F

CANCEL

DEBUG digits
EVENTS
id
HALT
LIST
LINKNAME=*
PKTTRACE pkttrace_options
ON LINKNAME=link_name
OFF
CLEAR
LIST
RESTART
mchlu
SNAP
id
TRACE id DATA
* OFF
TRAFFIC

| z/OS Load Balancing Advisor

| Control the Load Balancing Advisor from the operator’s console using the
| MODIFY command:

|

MODIFY procname,

| F

|
DEBug,Level=debuglevel

| DISplay, DEBug
,MAX=100
LB
,Index=lbindex ,MAX=*
,MAX=recs
|

| z/OS Load Balancing Agent

| Control the Load Balancing Agent from the operator’s console using the MODIFY
| command:

18 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

| MODIFY procname,
F
|

| DEBug,Level=debuglevel
DISplay, DEBug
,MAX=100
MEMbers
MEMbers,DETail ,MAX=*
MEMbers,DETail,PORT=portnum ,MAX=recs
MEMbers,DETail,TCPname=tcpname
Enable,Target options
Quiesce,Target options
|

| Target options:

| ,PROTOcol=TCP
PORT=portnum
,PROTOcol=proto ,IPaddr=ipaddr
TCPname=tcpname
SYStem
|
|
START TCPIP
Dynamically start a TCP/IP server or address space (including the TCP/IP address
space):

START procname

S ,PARMS=’(CTRACE(xxxxxxxx))’

STOP TCPIP
Stop a TCP/IP server or address space (including the TCP/IP address space) that
is in execution:

STOP procname

P

VARY TCPIP ABENDTRAP

Obtain abend dumps based on a return code being set in a given module:

Vary TCPIP , procname , Telnet , ABENDTRAP , modname


rcode
instance

Chapter 1. IP MVS operator commands 19

IP MVS operator commands

VARY TCPIP DATTRACE

Trace socket data (transforms) into and out of the physical file structure (PFS):

,TRACE


Vary TCPIP, , DATtrace

procname ,ON
,OFF

TRACE:

FULL JOBNAME=*
, ,

200 JOBNAME=job_name
ABBREV=
abbrev_length

IP=*


IP= IPv4_address
IPv6_address

IPv4_address:

,SUBNet=255.255.255.255
ipv4_address
,SUBNet=subnet_mask
/num_mask_bits

IPv6_address:

/128
ipv6_address
/prefixLength

VARY TCPIP DROP

Drop a connection:

Vary TCPIP , , DRop, connid


procname CMD=DRop, CONNection=connid

VARY TCPIP OBEYFILE

Change the TCP/IP configuration:

Vary TCPIP , , Obeyfile, datasetname


procname CMD=Obeyfile, DSN=datasetname

20 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

VARY TCPIP PKTTRACE

Set up packet tracing:

Vary TCPIP , , PKTtrace


procname Command

Command:

(1) (2)
, , ON 
LINKName = * OFF Packet Length
LINKName = link_name Protocol Type
INTFName = * Packet Dest Address
INTFName = intf_name Packet Source Port
Packet Dest Port

Packet Length:

,FULL

=200
,ABBREV
=abbrev_length

Protocol Type:

,PROT=*

,PROT=TCP
,PROT=UDP
,PROT=ICMP
,PROT=ICMPV6
,PROT=protocol_number

Packet Dest Address:

,IPaddr=*

,SUBNet=255.255.255.255
,IPaddr=ipv4_address
,SUBNet=subnet_mask
/num_mask_bits
/128
,IPaddr=ipv6_address
/prefixLength

Packet Source Port:

,SRCPort=*

,SRCPort=source_port

Chapter 1. IP MVS operator commands 21

 IP MVS operator commands

Packet Dest Port:

,DESTport=*

,DESTport=destination_port

Notes:
1 Each option can be specified only once. The order of options is not important.
2 The MVS TRACE command must also be issued for component SYSTCPDA
to activate the packet trace. Refer to z/OS Communications Server: IP Diagnosis
Guide for details.

VARY TCPIP PURGECACHE

Delete the ARP cache entries for a link or neighbor cache entries for an interface:

Vary TCPIP , , PURGECache,name


procname

VARY TCPIP START

Start a TCP/IP device or interface:

Vary TCPIP , , STArt ,device_name


procname ,interface_name

VARY TCPIP STOP

Stop a TCP/IP device or interface:

Vary TCPIP , , STOp ,device_name


procname ,interface_name

VARY TCPIP SYSPLEX

| Change the TCP/IP stack’s sysplex configuration:

Vary TCPIP , ,

procname

|
SYSplex, LEAVEgroup

JOINgroup
DEACTivate,DVIPA=dvipa
REACTivate,DVIPA=dvipa
QUIesce,POrt=portnum
,JOBNAME=jobname
,ASID=asid
QUIesce,TARGET
RESUME,POrt=portnum
,JOBNAME=jobname
,ASID=asid
RESUME,TARGET

22 z/OS V1R7.0 Comm Svr: Quick Reference

 IP MVS operator commands

VARY TCPIP TELNET

Control TELNET:

VARY TCPIP , procname , Telnet , DEBug ,


OFF

ACT VARY command:

VARY TCPIP , procname , Telnet , ACT , luname


INACT VARY command:

VARY TCPIP , procname , Telnet , INACT , luname


QUIESCE VARY command:

|

VARY TCPIP , procname , Telnet , QUIesce


,POrt=ALL
,POrt=num
,POrt=num1..num2
,POrt=Basic
,POrt=Secure
|

| RESUME VARY command:

|

VARY TCPIP , procname , Telnet , RESUME


,POrt=ALL
,POrt=num
,POrt=num1..num2
,POrt=Secure
,POrt=Basic
|

| STOP VARY command:

|

VARY TCPIP , procname , Telnet , STOp


,POrt=ALL
,POrt=num
,POrt=num1..num2
,POrt=Secure
,POrt=Basic

Chapter 1. IP MVS operator commands 23

IP MVS operator commands

24 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 2. TSO Commands
DIG Command
Query Name Servers

DIG

@server domain_name qtype qclass %comment

 

+queryoption −digoption

+queryoption:

© Copyright IBM Corp. 1984, 2005 25

TSO commands

noaaonly
aaonly
addit
noaddit
answer
noanswer
author
noauthor
nocl
cl
cmd
nocmd
nod2
d2
debug
nodebug
defname
nodefname
domain=name
Header
noHeader
header
noheader
noignore
ignore
noko
ko
pfand=number
pfdef
pfmin
pfor=number
pfset=number
noprimary
primary
noqr
qr
ques
noques
recurse
norecurse
reply
noreply
retry=limit
nosort
sort
stats
nostats
timeout=time_out_value
ttlid
nottlid
novc
vc

−digoption:

26 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

c query_class
envsav
envset
f data_set
P
53
p port
nostick
stick
0
T seconds
t query_type
x dotted_decimal_notation_address

FTP Command
Enter the FTP Environment

ftp 

-a NEVER 21
GSSAPI foreign_host
TLS port_number
-d
-e
-g
-i
-n
-p tcpip
-r NEVER
GSSAPI
TLS
-t data_set_name
-v
-w nn
-x

(
Exit TRACe TImeout nn TCP tcpip
Exit = nn


TRANslate data_set_name

The following sections describe the syntax for FTP subcommands. You must be in
the FTP environment to use the FTP subcommands.

! Subcommand
Invoke a z/OS UNIX System Services Function

!

shell_command

Chapter 2. TSO Commands 27

TSO commands

ACCOUNT Subcommand
Supply Account Information

ACCt account_information


APPEND Subcommand
Append a Local Data Set

APpend local_data_set destination_file


ASCII Subcommand
Change the Data Transfer Type to ASCII

AScii


BIG5 Subcommand
Change the Data Transfer Type to BIG5

BIG5

(
Ascii NOSo NOType
Sosi

Ebcdic

Space

BINARY Subcommand
Change the Data Transfer Type to Image

BINary


BLOCK Subcommand
Set the Block Data Transfer Mode

BLock


CD Subcommand
Change the Directory on the Remote Host

CD directory


28 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

CDUP Subcommand
Change to the Parent of the Working Directory

CDUp


CLOSE Subcommand
Disconnect from a Remote Host

CLose


COMPRESS Subcommand
Set the Compressed Data Transfer Mode

COMpress


DEBUG Subcommand
Set Internal Debug Options

1


DEBug

2

DELETE Subcommand
Delete Files

DELEte foreign_file


DELIMIT Subcommand
Display the File Name Delimiter

DELImit


DIR Subcommand
Obtain a List of Directory Entries

DIr

name ( DISK

EBCDIC Subcommand
Change the Data Transfer Type to EBCDIC

EBcdic


Chapter 2. TSO Commands 29

TSO commands

EUCKANJI Subcommand
Change the Data Transfer Type to EUCKANJI

EUckanji

(
Ascii NOSo NOType
Sosi

Ebcdic

Space

FILE Subcommand
Set the File Structure to File

FIle


GET Subcommand
Copy Files

Get foreign_file

local_file ( REPLACE

GLOB Subcommand
Toggle Expansion of Metacharacters

GLob


HANGEUL Subcommand
Change the Data Transfer Type to HANGEUL

HAngeul

(
Ascii NOSo NOType
Sosi

Ebcdic

Space

30 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

HELP and ? Subcommands

Display Help Information

HElp

All
PROXY
subcommand
Server
subcommand

IBMKANJI Subcommand
Change the Data Transfer Type to IBMKANJI

Ibmkanji

( NOType

JIS78KJ Subcommand
Change the Data Transfer Type to JIS78KJ

JIS78kj

Ascii
(
Jisroman NOSo NOType

JIS83KJ Subcommand
Change the Data Transfer Type to JIS83KJ

JIS83kj

Ascii
(
Jisroman Noso NOType

KSC5601 Subcommand
Change the Data Transfer Type to KSC-5601

Ksc5601

(
Ascii NOSo NOType
Sosi

Ebcdic

Space

LCD Subcommand
Change the Local Working Directory

LCd qualifier


Chapter 2. TSO Commands 31

 TSO commands

LMKDIR Subcommand
Create a Directory on the Local Host

LMkdir directory

( like remote_directory

LOCSITE Subcommand
Specify Site Information to the Local Host

LOCSIte options


options:

|
 ASAtrans
AUTOMount
AUTORecall
BLKsize
= size
BLocks
BLOCKSIze
= size
5
BUfno =
number
0
CHKptint =
number
home
CHKPTrefix userid
local
CHMod ooo filename
symbolic filename
CONDdisp = Catlg
Delete
CTRLConn 7BIT
iconv_ascii
FTP_STANDARD_TABLE
*
CYlinders
DATAClass
= data_class
DATASetmode
DB2 = db2_name
DBSUB
DCbdsn
= data_set_name
Directory
= size
DIRECTORYMode
ENCODING = SBCS
MBCS
EPSV4

32 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

|
 FILEtype = type
FWFriendly
ISPFSTATS
LISTSUBdir
LRecl
= length
MBDATACONN = (file_system_codepage,network_transfer_codepage)
MBSENDEOL = CRLF
CR
LF
NONE
MGmtclass
= mgmtclass
MIGratevol
= volume_ID
NOASAtrans
NOAUTOMount
NOAUTORecall
NODBSUB
NOEPSV4
NOFWFriendly
NOISPFSTATS
NOLISTSUBdir
NOQUOtesoverride
NORDW
NORESTGet
NOSBSUB
NOSECUREIMPlicitzos
NOSPRead
NOTRAILingblanks
NOTRUNcate
NOUCSSUB
NOUCSTRUNC
NOWRAPrecord
NOWRTAPEFastio
PDSTYPE =
PDS
PDSE
PRImary
= amount
10
PROGRESS =
number
Qdisk
= volume_serial
QUOtesoverride
RDW
READTAPEFormat
= tape_format
RECfm
= format
RESTGet
RETpd
= days

Chapter 2. TSO Commands 33

 TSO commands

|
 SBDataconn dsname
(file_system_cp,network_transfer_cp)
FTP_STANDARD_TABLE
*
SBSENDEOL = CRLF
CR
LF
NONE
SBSUB
SBSUBCHAR = nn
Space
SECondary
= amount
SECUREIMPlicitzos
SPRead
SQLCol = any
labels
names
STOrclass
= storage_class
TRacks
TRAILingblanks
TRUNcate
UCOUNT
= unit_count | P
UCSHOSTCS
= code_set
UCSSUB
UCSTRUNC
UMask ooo
Unit
= unit_type
VCOUNT
= volume_count
VOLume =
volume_serial
(volume_serial_list)
WRAPrecord
WRTAPEFastio

LOCSTAT Subcommand
Display Local Status Information

LOCSTat


LPWD Subcommand
Display the Current Working-Level Qualifier

LPwd


34 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

LS Subcommand
Obtain a List of File Names

LS

name ( Disk

MDELETE Subcommand
Delete Multiple Files

MDelete  foreign_file


MGET Subcommand
Copy Multiple Files

MGet  foreign_file

( REPLACE

MKDIR Subcommand
Create a Directory on the Remote Host

MKdir directory

( like local_directory

MODE Subcommand
Set the Data Transfer Mode

MOde B

C
S

MPUT Subcommand
Copy Multiple Data Sets to the Remote Host

MPut  local_data_set


NOOP Subcommand
Test the Connection

NOop


Chapter 2. TSO Commands 35

TSO commands

OPEN Subcommand
Connect to the FTP Server

21


Open host_name

port_number

PASS Subcommand
Supply a Password

PAss password

/newpass/newpass :userdata


account_information

PROMPT Subcommand
Toggle Interactive Prompting for M* Commands

PROMpt


PROXY Subcommand
Execute FTP Subcommand on Secondary Control Connections

PROXy subcommand


PUT Subcommand
Copy Data Sets to the Remote Host

PUt local_file

foreign_file

PWD Subcommand
Display the Current Working Directory

PWd


QUIT Subcommand
Leave the FTP Environment

QUIt


36 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

QUOTE Subcommand
Send an Uninterpreted String of Data

QUOte string


RECORD Subcommand
Set the File Structure to Record

RECord


RENAME Subcommand
Rename Files

REName original_name new_name


RESTART Subcommand
Restart a Checkpointed Data Transfer

REStart


RMDIR Subcommand
Remove a Directory on the Remote Host

RMdir directory


SCHINESE Subcommand
Change the Data Transfer Type to SCHINESE

SChinese

(
Ascii NOSo NOType
Sosi

Ebcdic

Space

SENDPORT Subcommand
Toggle the Sending of Port Information

SENDPort


Chapter 2. TSO Commands 37

TSO commands

SENDSITE Subcommand
Toggle the Sending of Site Information

SENDSite


SITE Subcommand
Send Site Specific Information to a Host

SIte options


options:

 ASAtrans
AUTOMount
AUTORecall
BLKsize
= size
BLocks
BLOCKSIze
= size
5
BUfno =
number
0
CHKptint =
number
CHMod ooo filename
symbolic filename
CONDdisp = Catlg
Delete
CTRLConn 7BIT
iconv_ascii
FTP_STANDARD_TABLE
*
CYlinders
DATAClass
= data_class
DATASetmode

38 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

|
 DB2 = db2_name
DCbdsn
= data_set_name

DEBug = 
?
ACC
ALL
BAS
CMD
FLO
FSC(n)
INT
JES
NONE
PAR
SEC
SOC(n)
SQL
UTL
Xyyy
DESt
= destination
Directory
= size
DIRECTORYMode

DUmp = 
?
n
ALL
FSC
JES
NONE
SOC
SQL
Xyyy
ENCODING = SBCS
MBCS

Chapter 2. TSO Commands 39

 TSO commands

|
 FILEtype = type
ISPFSTATS
200
JESENTRYLimit =
number
loginuserid*
JESJOBName =
jobname
JESLrecl = length
*
loginuserid
JESOwner =
userid
JESRecfm = F
V
*
ALL
JESSTatus =
INPUT
ACTIVE
OUTPUT
LRecl
= length
MBDATACONN = (file_system_codepage,network_transfer_codepage)
MGmtclass
= mgmtclass
MIGratevol
= volume_ID
NOASAtrans
NOAUTOMount
NOAUTORecall
NOISPFSTATS
NOQUOtesoverride
NORDW
NOSBSUB
NOSPRead
NOTRAILingblanks
NOTRUNcate
NOUCSSUB
NOUCSTRUNC
NOWRAPrecord
NOWRTAPEFastio

40 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

|
 PRImary
= amount
Qdisk
= volume_serial
QUOtesoverride
READTAPEFormat
= tape_format
RDW
RECfm
= format
RETpd
= days
SBDataconn dsname
(file_system_cp,network_transfer_cp)
FTP_STANDARD_TABLE
*
SBSUB
SBSUBCHAR nn
SECondary
= amount
SPRead
SQLCol = any
labels
names
STORrclass
= storage_class
TRacks
TRAILingblanks
TRUNcate
UCOUNT
= unit_count | P
UCSHOSTCS
= code_set
UCSSUB
UCSTRUNC
UMask ooo
Unit
= unit_type
VCOUNT
= volume_count
VOLume = volume_serial
(volume_serial_list)
WRAPrecord
WRTAPEFastio
XLate = name

Chapter 2. TSO Commands 41

TSO commands

SJISKANJI Subcommand
Change the Data Transfer Type to SJISKANJI

SJiskanji

(
Ascii NOSo NOType
Sosi

Ebcdic

Space

STATUS Subcommand
Retrieve Status Information from a Remote Host

STAtus

name

STREAM Subcommand
Set the Stream Data Transfer Mode

STREam


STRUCTURE Subcommand
Set the File Structure

STRucture File

Record

SUNIQUE Subcommand
Toggle the Storage Method

SUnique


On Off NAME NONAME

SYSTEM Subcommand
Display the Operating System Name

SYstem


TCHINESE Subcommand
Change the Data Transfer Type to TCHINESE

42 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

TChinese

(
Ascii NOSo NOType
Sosi
Ebcdic
Space

TSO Subcommand
Use TSO Commands

TSO command_line


TYPE Subcommand
Set the Data Transfer Type

A


TYpe B

1
2
5 A N
6 S
7 E
8 S
9
A
3
4 R N
E
F
1
I
B
U 2
L

UCS2 Subcommand
Change Data Transfer Type to Unicode UCS-2

UCs2

Big
(
Little NOType

USER Subcommand
Identify Yourself to a Host or Change Your TSO User ID Password

User user_id

Password

Chapter 2. TSO Commands 43

TSO commands

Password:

password

/ new_password / new_password : userdata

account_information

GDDMXD Command
Invoke the GDDMXD CLIST

GDDMXD ON

OFF

The following sections describe the syntax for GDDMXD command options.

Identifying the Target Display Option

internet_address :target_server

.target_screen

ANFontn Option
Specify the X Window System Font Used for Characters in the Alphanumeric
Presentation Space

gddmx*ANFontn: fontname


CMap Option
Specify Whether the Default Color Map is Loaded or Bypassed

Y


gddmx*CMap:

N

Compr Option
Control the Technique Used to Compress Bit-Mapped Data

O


gddmx*Compr:

A

Enter Option
Override the Default Key Mapping for Enter

gddmx*Enter: keysym_name


44 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

GColornn Option
Specify a Color Name

gddmx*GColornn: c


Geometry Option
Specify the Size and Location of the Initial GDDMXD Graphics Presentation Space

gddmx*Geometry: width x height + x_offset + y_offset


GMCPnn Option
Override GDDM® Multicolor Patterns with Workstation Color Names

gddmx*GMCPnn: c


HostRast Option
Perform Raster Image Processing at the System/370 Host

N


gddmx*HOSTRAST:

Y
X

NewLine Option
Override the Default Key Mapping for NewLine

gddmx*NewLine: keysym_name


XSync Option
Request that the X Window System Process One Request at a Time

N


gddmx*XSync:

Y

ZWL Option
Tell GDDMXD/MVS to Draw All Lines Using 0-Width Lines

N


gddmx*ZWL:

Y

Chapter 2. TSO Commands 45

TSO commands

HOMETEST Command
Verify Your Host Name and Address Configuration

HOMETEST


KDESTROY Command
Delete Kerberos Ticket Data Sets

KDESTROY

-f -q

KINIT Command
Connect to the Kerberos System

KINIT

-i -r -v -l
-irvl

KLIST Command
Display Your Current Tickets

user_id.TMP.TKT0


KLIST

-file data_set_name -srvtab

KPASSWD Command
Change Your Password

KPASSWD -u user_name

-i instance

LPQ Command
Request a List of the Printer Queue on a Remote Printer

LPQ

job_id ( Opt Parms 1: Opt Parms 2:

Opt Parms 1:

ALL Printer name Host host

AT host

46 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

Opt Parms 2:

TRace TYpe Version

LPR Command
Print to a Remote Printer

LPR data_set_name


(  Optional parameters

Optional parameters:

Chapter 2. TSO Commands 47

TSO commands

AT host
BIG5
NOBInary
BINary
BUrst
NOBUrst
CC
NOCc
CFfirst
CLass class
1

COpies copies
EOFlf
NOEOFlf
Euckanji
Filter filter
HAngeul
HEader
NOHeader
IBmkanji
Indent number
JIS78kj
ASCII
JISROMAN
JIS83kj
ASCII
JISROMAN
JNum number
Job jobname
Ksc5601
LAndscape
LANDNOcz
LATEconn
LNcz
55

LInecount count
NOLincount
Mail
NAme name
POstscript
NOPostscript
Printer name

More optional parameters:

48 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

Host host
SChinese
SJiskanji
SLowshutdown
SOsi
SOsi ASCII
SOsi EBCDIC
SOsi NONE
SOsi SPACE
TChinese
TIMEout
Title title
TOpmargin number
NOTOpmargin
TRACe
TRANslatetable name
TYpe USCFxlate
User name
Version
Width width
Xlatetable name
-o option

LPRM Command
Remove a Job from the Printer Queue on a Remote Host

LPRM

job_id Opt Parms 1: Opt Parms 2:

Opt Parms 1:

(
Printer name Host host
AT host

Opt Parms 2:

TRace TYpe Version

LPRSET Command
Set the Default Printer and Host Name

LPRSET printer@host

Optional Parameters:

Chapter 2. TSO Commands 49

TSO commands

Optional Parameters:

(
Query TRace Version
TYpe

MAKESITE Command
Generate new hlq.HOSTS.SITEINFO and hlq.HOSTS.ADDRINFO Data Sets

MAKESITE , ,

HLQ=hlq MGMTclas=management_class

, , ,

DATAclas=data_class STORclas=storage_class Unit=unit


VOLser=volume_serial

NDBCLNT Command
Issue SQL Statements to a DB2® Subsystem

NDBCLNT

-h host_name -u userid -p password


-d DB2_subsystem -o output_file -s -l -c
-o output_file

NETSTAT Command
Use the TSO NETSTAT command to display the network configuration and status
on a local TCP/IP stack

(1)


NETSTAT

Report Option

Target Output (Filter
Command
Target

Report Option:

50 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

COnn

(2) (3) (4) (5) (6)

ALL
(2) (3) (4) (5) (6) (7)
ALLConn
ARp net address
ALL
(2) (3) (4) (5)
BYTEinfo
IDLETIME
CACHinfo
(2) (5)
CLients
CONFIG
(2) (3) (4) (5) (6) (7)
COnn
(8)
DEvlinks
(4)
Gate
DETAIL
HElp
?
(8)
HOme
SUMmary (9)
IDS
PROTOcol protocol
(4)
ND
(6)
PORTList
(4)
ROUTe
ADDRTYPE IPV4
IPV6
DETAIL
IQDIO
RSTAT
(10)
SLAP
SUMmary
(2) (3) (4) (5) (6)
SOCKets
(11)
STATS
PROTOcol protocol
(2) (3) (4) (6) (12) (13)
TELnet
DETAIL

Chapter 2. TSO Commands 51

 TSO commands

|
GRoup
TTLS
COnn connid
DETAIL
GRoup
DETAIL
Up
(3) (4) (6)
VCRT
DETAIL
(4) (6)
VDPT
DETAIL
(4)
VIPADCFG
VIPADyn
DVIPA
VIPAROUTE

Command:

DRop n

Target:

TCp tcpname

Output:

REPort
DSN dsnname
HLQ hlqname
STACk FORMat LONG
TITLes SHORT

Filter:

52 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

|
(12)
APPLname  applname

(2)
CLIent  clientname
(7)
CONNType NOTTLSPolicy
TTLSPolicy
CURRent
GRoup groupid
STALE
(3)
HOSTName hostname
(8)
INTFName intfname

(4)
IPAddr  ipaddr
ipaddr/prefixLen
ipaddr/subnetmask

(13)
LUName  luname
(5)
NOTN3270
(10)
POLicyn policyname

(6)
POrt  portnum

Notes:
1 The minimum abbreviation for each parameter is shown in uppercase letters.
2 The CLIent filter is valid with ALL, ALLConn, BYTEinfo, COnn, CLients,
SOCKets, and TELnet.
3 The HOSTName filter is valid only with ALL, ALLConn, BYTEinfo, COnn,
SOCKets, TELnet, and VCRT.
| 4 The IPAddr filter is valid only with ALL, ALLConn, BYTEinfo, COnn, Gate,
| ND, ROUTE, SOCKets, TELnet, VCRT, and VDPT, and VIPADCFG.
5 The NOTN3270 filter is valid only with ALL, ALLConn, BYTEinfo, COnn,
CLients, and SOCKets.
6 The POrt filter is valid only with ALL, ALLConn, COnn, PORTList, SOCKets,
TELnet, VCRT, and VDPT.
| 7 The CONNType is valid only with ALLConn and COnn.
8 The INTFName filter is valid only with DEvlinks and HOme.
9 The valid protocol values are TCP and UDP.
10 The POLicyn filter is valid only with SLAP.
11 The valid protocol values are IP, ICMP, TCP, and UDP.
12 The APPLname filter is valid only with TELnet.
13 The LUName filter is valid only with TELnet.

Chapter 2. TSO Commands 53

TSO commands

NSLOOKUP Command
Query a Name Server in Command Mode

NSLOOKUP domain_name

domain_address server_name
server_address
 −Option

Option:

all
nobrackets
brackets
class=class
nod2
d2
nodebug
debug
nodefname
defname
domain=name
noignoretc
ignoretc
53
port = port
A
querytype = type
recurse
norecurse
retry=limit
root=name
search
nosearch
/

srchlist=  domain
timeout=interval
novc
vc

Issue Queries to Name Servers in Interactive Mode

NSLOOKUP Enter

− server_name
− server_address
 −Option

Enter

 SubCommand


54 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

SubCommand:

domain_name
domain_address server_name > data_set_name
server_address >>
exit
finger loginname
> data_set_name
>>
help
?
ls domain
−a > data_set_name
−d >>
−h
−s
−t
type
lserver name
address
root
server name
address
set - Option
view data_set_name

Chapter 2. TSO Commands 55

TSO commands

Option:

all
nobrackets
brackets
class=class
nod2
d2
nodebug
debug
nodefname
defname
diffstamp
domain=name
noignoretc
ignoretc
53
port = port
A
querytype = type
recurse
norecurse
retry=limit
root=name
search
nosearch
/

srchlist=  domain
timeout=interval
nostamp
tstamp
novc
vc

PING Command
The PING command sends an echo request to a foreign node (remote host) to
determine whether the node is accessible

PING host_name

( Option
Help
?

Option:

56 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands


Addrtype ipv4
ipv6
1
Count
echo
Intf interface
256
Length
bytes
Srcip srcip
TCP tcpname
10
Timeout
seconds

REXEC Command
Execute a Command on the Remote Host and Receive the Results on Your Local
Host

REXEC

-? -d -n -l user_id -p password

-s 512

foreign_host command

-s port -t dataset_name

RPCINFO Command
Display Server Information

RPCINFO -p

host
-u host prognum
versnum -n portnum
-t host prognum
versnum
-b prognum versnum

RSH Command
Execute a Command on a Remote Host and Receive the Results on Your Local
Host

-s 514


RSH

-? -d -l user/password -s port

Chapter 2. TSO Commands 57

TSO commands

foreign_host command


SMSG SMTP Command

Command for the general user

SMSG SMTP HElp


QUeues
STats

Command for the privileged user

SMSG SMTP DEbug


EXpire IP_address
NODebug
NOTrace
SHutdown
STOPEXIT
STARTEXIT
TRace

SMTPNOTE Command
Send Electronic Mail to One or More Recipients on NJE or TCP Networks

SMTPNOTE

To ( recipient ) Cc ( recipient )
NOCc


Subject ( subject ) Dataset ( data_set_name )
Batch
Reuse

TELNET Command


TELNET

23
foreign_host port_number
Help


(
Linemode DEBUG TRANslate data_set_name

The following sections describe the syntax for TELNET command options

58 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands

AO Option
Terminate Output Display

AO


AYT Option
Query the Connection

AYt


BRK Option
Send the Break or Attention Keystroke to a Host

Brk


HELP Option
Display Help Information

Help

?

IP Option
Interrupt the Process

Ip


PA1 Option
Send the PA1 Keystroke to a Host

Pa1


QUIT Option
End the Telnet Session

Quit


SYNCH Option
Clear the Data Path

Synch


Chapter 2. TSO Commands 59

TSO commands

¢ and ` Option
Send ASCII Control Characters to a Host in Line Mode

¢ control_character

`

Terminal and Conversion Type Option


VT282 SJISKANJI
VT100 /
TTY JIS78KJ
JIS83KJ
BIG5
EUCKANJI
DECKANJI
HANGEUL
KSC5601
SCHINESE
TCHINESE

TESTSITE Command
Verify hlq.HOSTS.ADDRINFO and hlq.HOSTS.SITEINFO Data Sets Correctly
Resolve the Name of a Host, Gateway, or Net

TESTSITE


TRACERTE Command
Debug Network Problems

TRACERTE ?

host_name
packetSize ( Options

Options:

60 z/OS V1R7.0 Comm Svr: Quick Reference

 TSO commands


Addrtype ipv4
ipv6
DEBUG
Intf interface
Limdisp
30
MAX
hop
NOName
NORoute
33434
PORT
num
Srcip srcAddr
TCP tcpname
0
Tos
tos
3
TRY
attempts
Verbose
5
WAIT
seconds

Chapter 2. TSO Commands 61

TSO commands

62 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 3. z/OS UNIX Commands
dig Command
Gather information from the Domain Name System servers

Command Line Mode

dig

query
-h

Multiple Query Mode

dig +global_queryopt


 query
-h

query:



@server name type class -b address
-c class
-f filename
-k filename
-n
-p port#
-t type
-x addr
-y name:key

+queryopt

+queryopt or +global_queryopt:

© Copyright IBM Corp. 1984, 2005 63

z/OS UNIX Commands


+noaaonly | +aaonly
+noadditional | +additional
+noadflag | +adflag
+noall | +all
+noanswer | +answer
+noauthority | +authority
+nobesteffort | +besteffort
+nocdflag | +cdflag
+nocmd | +cmd
+nocomments | +comments
+nodefname | +defname
+nodnssec | +dnssec
+nofail | +fail
+noidentify | +identify
+noignore | +ignore
+nomultiline | +multiline
+nonssearch | +nssearch
+noqr | +qr
+noquestion | +question
+norecursive | +recursive
+nosearch | +search
+noshort | +short
+nosta | +sta
+notcp | +tcp
+notrace | +trace
+novc | +vc
+bufsize=B
+domain=somename
+ndots=D
+time=T
+tries=A

dnsdomainname Command
Display the DNS Domain Name of the System

- c


dnsdomainname 

(1)
- c
(1)
- g
(1)
- r
- p stackname
- d
- h
- ?

Notes:
1 Only one of the -c, -g, and -r parameters can be specified.

64 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

dnssec-keygen Command
Generate keys for DNSSEC, Secure DNS, as defined in RFC 2535 or for use in
Transaction Signatures (TSIG) which is defined in RFC 2845

dnssec-keygen Parameters

-h

Parameters:

-a algorithm -e -b keysize -n nametype

-g generator

 name
-c class
-p protocol-value
-r randomdev
-s strength-value
-t type
-v level

dnssec-makekeyset Command
Create a key set file from one or more keys created by the dnssec-keygen
command

dnssec-makekeyset  keyfile

-a
-s start-time
-e end-time
-t TTL
-r randomdev
-p
-v level
-h

dnssec-signkey Command
Sign a key set for a child zone

Chapter 3. z/OS UNIX Commands 65

z/OS UNIX Commands

dnssec-signkey  keyset  keyfile


-a
-c class
-e end-time
-p
-r randomdev
-s start-time
-v level
-h

dnssec-signzone Command
Sign a DNS zone with one or more key files

dnssec-signzone  zonefile 

-a keyfile
-c class
-d directory
-e end-time
-f output-file
-i interval
-n ncpus
-o origin
-p
-r randomdev
-s start-time
-t
-v level
-h

dnsmigrate Command
Convert named boot files for the DNS BIND 4.9.3 name server into named .conf
files suitable for the DNS BIND 9 name server

dnsmigrate

-i input_file
-o output_file

ftp Command

FTP  - d

- e 21
- g foreign_host
- i port_number
- n
- p tcpip
- t dsn
- v
- w nn
66 z/OS V1R7.0 Comm Svr: Quick Reference
 z/OS UNIX Commands

(
Exit TRACe TImeout nn TCP tcpip
Exit = nn


TRANslate dsn OPTMSs

host Command
Identify the IP Addresses Associated with a Specified DNS Hostname or Identify
the DNS Hostnames Associated with a Specified IP Address

host host


hostname Command
Display the Fully-Qualified DNS Hostname of the Local System

- c


hostname 

(1)
- c
(1)
- g
(1)
- r
- s
- p stackname
- d
- h
- ?

Notes:
1 Only one of the -c, -g, and -r parameters can be specified.

ipsec Command
Display and modify IP security information on the local host

ipsec Primary Option


Global Option

Primary Option:

Chapter 3. z/OS UNIX Commands 67

 z/OS UNIX Commands

-f IP Filter Option
-m Manual Tunnel Option
-k IKE Tunnel Option
-y Dynamic Tunnel Option
-i Interface Option
-t IP Traffic Test Option
-o NATT Port Translation Option
-?

Global Option:

-p stackname
3
-d
debuglevel

IP Filter Option:
-r detail -c current
display
-r short -c current Filter Sel
detail policy
wide -c profile

default
reload

Filter Selection:

|
, -h

-a  Ynn
Mnn
,

-n  IpFilterRuleName
,

-g  IpFilterGroupName

Manual Tunnel Option:

-r detail
display
-r short Man Tunnel Sel
detail
wide
activate
Man Tunnel Sel
deactivate Man Tunnel Sel
-a all

68 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

Man Tunnel Selection:

-a  Mnn
,

-n  IpManVpnActionName

IKE Tunnel Option:

-r detail -c current
display
-r
short -c current IKE Tunnel Sel -e
detail all
wide
deactivate IKE tunnel Sel2
-a all
refresh IKE Tunnel Sel2

IKE Tunnel Selection:

-a  Knn
,

-n  KeyExchangeRuleName

IKE Tunnel Selection2:

-a  Knn

Dynamic Tunnel Option:

-r detail -c current
display
-r short -c current -b Dyn Tunnel Sel
detail all -s
wide
,

activate -l  LocalDynVpnRuleName
deactivate Dyn Tunnel Sel2
-a all
refresh Dyn Tunnel Sel2

Chapter 3. z/OS UNIX Commands 69

z/OS UNIX Commands

Dyn Tunnel Selection:

-a  Ynn
,

-n  IpDynVpnActionName
,

-l  LocalDynVpnRuleName

Dyn Tunnel Selection2:

-a  Ynn
,

-l  LocalDynVpnRuleName

Interface Option:

-r detail
display
-r short
detail
wide

IP Traffic Test Option:

-r detail
SrcIpAddr DestIpAddr tcp SrcPort DestPort
udp SrcPort DestPort in SecurityClass -r short
icmp out detail
igmp wide
ipip
ah
esp
ospf
n

NATT Port Translation Option:

-r detail
display
-r short -q rmtIpAddr ,
detail
wide -u  rmtPort

mailstats Command
Printing Statistics

70 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

|

mailstats - C <conf filename>


- f <stat filename>
- o
- p
- P

named Command
Start a name server

BIND 4.9.3

named  −Option


Option:

-ddl
-premote #
/local #
-bfilename
-q
-r
-tnn
-lnn
-V v4
v9

BIND 9

named  −Option


Option:

-d dl
-c
-f
-g
-n integer
-p port
-t
-u userid
-V v4
v9
-v

Chapter 3. z/OS UNIX Commands 71

z/OS UNIX Commands

nsupdate Command
Dynamically update a name server

Command mode

BIND 4.9.3:

nsupdate 
-k keyfile
-h hostname
-d domainname
-p primaryname
-r IPaddress
-s ″command string″
-a
-g
-q
-v
-?
v4
-V
v9

BIND 9:

nsupdate 
-d batch_file_name
-v
-y keyname:secret
-k keyfile
-D
-M
v4
-V
v9

Subcommand mode

Start nsupdate subcommand mode

nsupdate Enter


Subsequent subcommand entry (valid with version 4 of nsupdate)

72 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

 Enter

quit
add
delete
exists
new
sign
ttl

Subsequent subcommand entry (valid with version 9 of nsupdate)

 Enter

quit
prereq nxdomain
yxdomain
nxrrset
yxrrset
server
send
show
update add
delete
zone

netstat Command
Use the z/OS® UNIX® netstat command to display the network configuration and
status on a local TCP/IP stack

Note: netstat is a synonym for the onetstat command in the z/OS UNIX shell. The
onetstat command syntax is the same as that for the netstat command.

netstat Report Option


Target Output Filter
Command
Target

Report Option:

Chapter 3. z/OS UNIX Commands 73

z/OS UNIX Commands

-c

(1) (2) (3) (4) (5)

-A
(1) (2) (3) (4) (5) (6)
-a
(1) (2) (3) (5)
-b
IDLETIME
-C
(1) (2) (3) (4) (5) (6)
-c
(7)
-d
(1) (5)
-e
(3)
-F
-f
(3)
-g
DETAIL
(7)
-h
-J
(8)
-j
SUMmary
SUMmary (9)
-k
PROTOcol protocol
(3)
-n
(3) (4)
-O
DETAIL
(4)
-o
-R net address
ALL (3)
-r
ADDRTYPE IPV4
IPV6
DETAIL
IQDIO
RSTAT
(10)
-S
PROTOcol protocol
(1) (2) (3) (4) (5)
-s

74 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

|
(1) (2) (3) (4) (11) (12)
-t
DETAIL
-u
(2) (3) (4)
-V
DETAIL
-v
DVIPA
VIPAROUTE
GRoup
-x
COnn connid
DETAIL
GRoup
DETAIL
-?

Command:

-D n

Target:

-p tcpname

Output:

-M LONG
SHORT

Filter:

Chapter 3. z/OS UNIX Commands 75

 z/OS UNIX Commands

|
(1)
-E  clientname
(2)
-H hostname

(3)
-I  ipaddr
ipaddr/prefixLen
ipaddr/subnetmask
(7)
-K intfname

(12)
-L  luname

(11)
-N  applname

(4)
-P  portnum
(5)
-T
(6)
-X NOTTLSPolicy
TTLSPolicy
CURRent
GRoup groupid
STALE
(8)
-Y policyname

Notes:
1 -E filter is valid only with -A, -a, -b, -c, -e, -s, and -t.
2 -H filter is valid only with -A, -a, -b, -c, -s, -t, and -V.
3 -I filter is valid only with -A, -a, -b, -c, -F, -g, -n, -O, -r, -s, -t, and -V.
4 -P filter is valid only with -A, -a, -c, -O, -o, -s, -t, and -V.
5 -T filter is valid only with -A, -a, -b, -c, -e, and -s.
| 6 -X filter is valid only with -a, and -c.
7 -K filter is valid only with -d and -h.
8 -Y filter is valid only with -j.
9 The valid protocol values are TCP, and UDP.
10 The valid protocol values are ICMP, IP, TCP, and UDP.
11 -N filter is valid only with -t.
12 -L filter is valid only with -t.

76 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

onslookup/nslookup Command
Note: nslookup is a synonym for the onslookup command in the z/OS UNIX
shell. nslookup command syntax is the same as that for the onslookup
command.

Issuing Multiple Queries to Name Servers in Interactive Mode

BIND 4.9.3:

onslookup Enter

− server_name
− server_address
 − Option

Enter

 SubCommand

BIND 9.0:

onslookup Enter

−server_name
−server_address
 − Option

Enter

 SubCommand

Options:

Chapter 3. z/OS UNIX Commands 77

z/OS UNIX Commands

all
IN
class= ANY
CHAOS
HESIOD
nod2
d2
nodebug
debug
defname
nodefname
domain=name
(1)
help
(2)
h
noignoretc (1)
ignoretc
53
port =port_number
A
querytype =resource_record_type
recurse (1)
norecurse
(1)
retry=limit
(1)
root=name
search (1)
nosearch
(2)
sil
/
(1)
srchlist=  domain
timeout=interval
v4
V=
v9
novc (1)
vc

Notes:
1 Valid with version v4 nslookup only.
2 Valid with version v9 nslookup only.

SubCommand:

78 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

onslookup Enter

exit
(1)
help
?
host
server
(1)
ls domain
ls_opt > file_name
>>
lserver name
address
(1)
root
server name
address
set keyword
= value
(1)
view file_name

Notes:
1 Valid with BIND 4.9.3 version of nslookup only.

Querying A Name Server in Command Mode

onslookup name

address server_name
server_address
 −Option

ping Command
Send an echo request to a foreign node (remote host) to determine whether the
node is accessible

Note: ping is a synonym for the oping command in the z/OS UNIX shell. The
oping command syntax is the same as that for the ping command.

ping host_name

Option
-h
-?

Option:

Chapter 3. z/OS UNIX Commands 79

z/OS UNIX Commands


-A ipv4
ipv6
1
-c
echo
-i interface
256
-l
bytes
-p tcpname
-s srcip
10
-t
seconds

orexec/rexec Command
Execute a Command on the Remote Host

-s port


orexec

-? -d -l user_id -p password -s port

foreign_host command

-V -C

Note: rexec is a synonym for the orexec command in the z/OS UNIX shell. rexec
command syntax is the same as that for the orexec command.

orpcinfo/rpcinfo Command
Display Server Information

orpcinfo - p

host
- u host prognum
versnum - n portnum
- t host prognum
versnum
- b prognum versnum
?

Note: rpcinfo is a synonym for the orpcinfo command in the z/OS UNIX shell.
rpcinfo command syntax is the same as that for the orpcinfo command.

osnmp/snmp Command
Getting MIB Variables

80 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

- d 0 - h localhost - r 2


osnmp

- d debug_level - h target host - r retry number

- c public - t 3



- c community_name - t timeout value - v - a

get

getnext
- m 10 - n 0
getbulk
- m max repetitions - n non-repeaters

 mib_variable


Setting the MIB Variables

- d 0 - h localhost - r 2


osnmp

- d debug_level - h target host - r retry number

- c public - t 3

set

- c community_name - t timeout value - v - a

 mib_variable value

vartype

Walking the MIB Tree

- d 0 - h localhost - r 2


osnmp

- d debug_level - h target host - r retry number

- c public - t 3



- c community_name - t timeout value - v - a

walk mib_variable

- m 10 - n 0
bulkwalk
- m max repetitions - n non-repeaters

Displaying osnmp Help

Chapter 3. z/OS UNIX Commands 81

 z/OS UNIX Commands

osnmp - ?


Receiving a Trap

- d 0 - p 162


osnmp trap

- d debug_level - p port_number

Finding a MIB Variable Name

- d 0


osnmp findname mib_variable

- d debug_level

Note: snmp is a synonym for the osnmp command in the z/OS UNIX shell. snmp
command syntax is the same as that for the osnmp command.

otracert/traceroute Command
Debug Network Problems

|

traceroute ?

otracert host_name
Options packetSize

82 z/OS V1R7.0 Comm Svr: Quick Reference

 z/OS UNIX Commands

Options:


-A ipv4
ipv6
-a tcpname
-d
-i interface
-l
30
-m
hop
-n
33434
-p
num
3
-q
attempts
-r
-s srcAddr
0
-t
tos
-v
5
-w
seconds

Note: traceroute is a synonym for the otracert command in the z/OS UNIX shell.
traceroute command syntax is the same as that for the otracert command.

pasearch Command
Query information from the Policy Agent (Pagent)

pasearch 

Option

Option:

Chapter 3. z/OS UNIX Commands 83

 z/OS UNIX Commands

| -A -e

-A
-I
-a
-c
-d
-e
-f PolicyFilterName
-g
-i
-n
-o
-p TcpImage
-q
-r
-s PolicyScopeName
-t
-v a
f
k
l
-w
-?

popper Command


popper - b <directory name>

- d
- n <message count>
- s
- t <file name>
- T <timeout>
- u

pwchange Command
Generate hexadecimal encryption key to update password for SNMP use

-d 0 -p HMAC-MD5 -u auth


pwchange

-e -d n -p protocol -u key_usage -s

old_password new_password IPaddress


hostname
engineID

pwtokey Command
Convert password into hexadecimal encryption key for SNMP or OMPROUTE use

-d 0 -p HMAC-MD5 -u auth


pwtokey

-e -d n -p HMAC-SHA -u key_usage -s
-p all
84 z/OS V1R7.0 Comm Svr: Quick Reference
 z/OS UNIX Commands

password

IPaddress
hostname
engineID

rndc Command
Remotely control the operation of a name server

rndc command command ...


−c config
−s server
−p port
−y key
−V

rndc-confgen Command
Create configuration files for rndc

rndc-confgen

-a
−b keysize
−c keyfile
-h
−k keyname
−p port
−r randomdev
−s address
−t chrootdir
−u user

sendmail Command


sendmail

user_name command_line_switch

sntpd Command
Start the sntp daemon

sntpd

-d -pf pathname unicast mode unicast mode -s n
-df pathname -b nnnnn -m nnnnn
?

trmdstat
(1)


trmdstat

Chapter 3. z/OS UNIX Commands 85

z/OS UNIX Commands

- d 0

i f p log_filename

- d n (2)
- C h
- D
- ?

i:

- i initial_time

f:

- f final_time

p:

- p *

- p port_range

h:

- h ip_address

Notes:
1 If no options are specified the overall summary report is displayed.
2 The -D and -h options can be used in any order with the -C option.

86 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 4. Other IP commands, options, and subcommands
Table 1. IP commands, options, and subcommands
Command type Reference
®
NetView SNMP (SNMP) Command Refer to z/OS Communications Server: IP
System Administrator’s Commands.
IPCS Subcommands for TCP/IP Refer to z/OS Communications Server: IP
Diagnosis Guide.
CTRACE Command and Options for Refer to z/OS Communications Server: IP
TCP/IP Diagnosis Guide.

© Copyright IBM Corp. 1984, 2005 87

Other IP commands, options, and subcommands

88 z/OS V1R7.0 Comm Svr: Quick Reference

Part 2. VTAM commands
VTAM commands are listed in this section alphabetically. For more information on
these commands, refer to z/OS Communications Server: SNA Operation.

© Copyright IBM Corp. 1984, 2005 89

VTAM commands

90 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 5. Display commands
D ADJCLUST
Display the adjacent cluster (routing) tables and their entries in the order to be
used for APPN searches:

,SCOPE=ONLY


DISPLAY NET,ADJCLUST

,NETID=netid ,SCOPE= ONLY
ALL

D ADJCP
Display the attributes of a specific adjacent node and the connections in which it is
currently involved:

,SCOPE=ONLY


DISPLAY NET,ADJCP ,ID=adjacent_cp_name

,SCOPE= ALL
ONLY

D ADJSSCPS
Display user-defined and dynamic adjacent SSCP tables:

DISPLAY NET,ADJSSCPS

,CDRM=sscp_name

,MAX=DSPLYDEF_start_option_value



,MAX= * ,NETID=netid
number_of_resources

,SCOPE=ONLY



ALL
,SCOPE=

ALL
ONLY

Display adjacent SSCP table for specific cross-domain resource:

DISPLAY NET,ADJSSCPS ,CDRSC=cdrsc_name

© Copyright IBM Corp. 1984, 2005 91

Display commands

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

Display a specific list of adjacent CDRMs used for session requests:

DISPLAY NET,ADJSSCPS ,ADJLIST=list_name

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

Display all lists of adjacent CDRMs:

,MAX=DSPLYDEF_start_option_value


DISPLAY NET,ADJSSCPS ,ADJLIST=*

,MAX= *
number_of_resources

D APING
Test whether a route to another LU 6.2 resource or control point is available and
display performance information for the route if the resource supports an APING
server:

DISPLAY NET,APING ,ID=resource_name

,CONSEC=1 ,ECHO=YES



,CONSEC=number_of_consecutive_packets ,ECHO= NO
YES

,ITER=2 ,LIST=ALL



,ITER=number_of_send_and_receive_iterations ,LIST=SUMMARY

,LOGMODE=#INTER ,SIZE=100



,LOGMODE=logon_mode_name ,PASSWORD ,SIZE=size_of_packet

,TP=APINGD



,TP=transaction_program_name ,USERID=userid

92 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

D APINGDTP
Display the number of APINGD transaction programs permitted to run
concurrently for responding to APING requests from other nodes:

DISPLAY NET,APINGDTP

,LIST=ONLY



,MAX=DSPLYDEF_start_option_value
,LIST= ALL
,MAX= *
number_of_sessions
COUNT
ONLY

D APINGTP
Display the number of APING transaction programs permitted to run concurrently
for sending APING command requests to other node; optionally, display the
number of active sessions for the APINGD TP and show information about those
sessions:

DISPLAY NET,APINGTP

,LIST=ONLY



,MAX=DSPLYDEF_start_option_value
,LIST= ALL
,MAX= *
number_of_sessions
COUNT
ONLY

D APPLS
Display the status of active application program major nodes in the domain along
with their subordinate application program minor nodes:

DISPLAY NET,APPLS

(1)
,ID= name
,

(  name )

Chapter 5. Display commands 93

Display commands

,MAX=DSPLYDEF_start_option_value ,SCOPE=ALL



,MAX= * ALL
number_of_resources ,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
PENDING
RESET

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D APPNTOSA
Display the APPN-to-subarea class-of-service mapping table:

DISPLAY NET,APPNTOSA


D AUTOLOG
Display the controlling applications for which there are pending AUTOLOGON
requests:

,SCOPE=ONLY


D NET,AUTOLOG

,ID=controlling_appl ,SCOPE=ALL
,SCOPE=ONLY

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

D BFRUSE
Display information about VTAM buffer use and storage usage summary
information for VTAM modules:

,BUFFER=*


DISPLAY NET,BFRUSE

,BUFFER= *
SHORT
SUMMARY
buffid
( buffid )
,SUMMARY

94 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

D BNCOSMAP
Display native and nonnative COS mappings defined for a border node:

,SCOPE=ONLY


DISPLAY NET,BNCOSMAP

,NETID=netid ,SCOPE= ONLY
ALL

D CDRMS
Display the status of active cross-domain resource manager (CDRM) major nodes
and their subordinate minor nodes:

DISPLAY NET,CDRMS

(1)
,ID= name
,

(  name )

,MAX=DSPLYDEF_start_option_value ,SCOPE=ALL



,MAX= * ALL
number_of_resources ,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
PENDING
RESET

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D CDRSCS
Display information about cross-domain resources, including independent LUs:

DISPLAY NET,CDRSCS

(1)
,ID= name
,

(  name )

Chapter 5. Display commands 95

Display commands

,MAX=DSPLYDEF_start_option_value



,MAX= * ,NETID=
number_of_resources netid
*NONE

,SCOPE=ALL



ALL
,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
PENDING
RESET

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D CLSTRS
Display the status of physical units (PUs) subordinate to an NCP node, a local
SNA node, or a switched subarea node:

DISPLAY NET,CLSTRS

(1)
,ID= name
,

(  name )

,IDTYPE=* ,LIST=ALL



,IDTYPE= LCLSNA ,LIST= ALL
PUT45 COUNT
SWSEG
*

,MAX=DSPLYDEF_start_option_value



,MAX= * ,OWNER= host_name
number_of_resources *NONE

96 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

,SCOPE=ALL



ALL
,SCOPE=
ACT
ACTONLY
ALL
CONCT
IACTIVE
IINACT
INACT
INACTONLY
PENDING
RELSD
RESET

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D CNOS
Display LU 6.2 information associated with an application program and a partner
LU and logon mode:

DISPLAY NET,CNOS ,ID=appl_name ,LUNAME=lu_name


,LOGMODE=logon_mode_name

D CONVID
Provide information about active conversations with the specified application
program:

,ETIME=0


DISPLAY NET,CONVID ,ID=appl_name

,ETIME=number_of_minutes


,LOGMODE=logon_mode_name ,LUNAME=lu_name

D COS
Display the class-of-service (COS) table name for a particular network or all
networks associated with a specified PU type 4 or 5:

,TYPE=SUBAREA


DISPLAY NET,COS

,ID=pu_name ,NETID= *
netid

Chapter 5. Display commands 97

Display commands

Display the APPN class-of-service (COS) table entries and the APPNCOS table
used to create each entry:

DISPLAY NET,COS,TYPE=APPN


D CPCP
Display detailed CP-CP session status:

,ID=*.* ,LIST=ALL


DISPLAY NET,CPCP

(1) (2)
,ID=adjacent_cp_name ,LIST= NN
EN

,MAX=DSPLYDEF_start_option_value ,SCOPE=ALL



,MAX= * ,SCOPE= ACT
number_of_adjacent_CP ALL
PENDING
INACT

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.
2 Since an end node will never have a CP-CP session with another end node,
LIST=EN is not valid if this command is issued from an end node. In this
case, the LIST operand is not necessary because the output for LIST=ALL and
LIST=NN will be identical.

D CSDUMP
Display the current CSDUMP triggers set earlier by Modify CSDUMP command:

DISPLAY NET,CSDUMP


D CSM
Monitor the use of storage managed by the communications storage manager
(CSM):

DISPLAY NET,CSM

,OWNERID= ALL
ownerid

Display the status of the CSM Monitoring as follows:

DISPLAY NET,CSM,MONITOR


98 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

D CSMUSE
The DISPLAY CSMUSE command allows IBM® service to evaluate the use of
storage managed by the communications storage manager (CSM). Although this
command is similar to DISPLAY CSM command, it provides a lower level of detail
regarding storage usage, and therefore the output of this command is different
than that of DISPLAY CSM.

,POOL=ALL ,OWNERID=ALL


DISPLAY NET,CSMUSE

,POOL= ALL ,OWNERID= ALL
poolname ownerid

D DIRECTRY
Display information about a resource:

,SCOPE=ONLY


DISPLAY NET,DIRECTRY ,ID=name

,SCOPE= ALL
ONLY
NSEARCH

Display a resource name in any network:

,MAX=DSPLYDEF_start_option_value


DISPLAY NET,DIRECTRY ,ID=*.name

,MAX= *
number_of_resources

,SCOPE=ONLY




D DISK
Provide information about an IBM 3720 or 3745 Communication Controller’s disk
contents:

DISPLAY NET,DISK ,ID=ncp_name


D DLURS
Display all DLURs for which this host acts as dependent LU server (DLUS):

DISPLAY NET,DLURS


Chapter 5. Display commands 99

Display commands

D EE
Display general Enterprise Extender information:

,LIST=SUMMARY


DISPLAY NET,EE

,LIST=SUMMARY
,LIST=DETAIL

Display Enterprise Extender connection information by LINE or PU name:

,LIST=SUMMARY


DISPLAY NET,EE ,ID=name

,LIST=SUMMARY
,LIST=DETAIL

Note: The name represents either an Enterprise Extender LINE or switched PU

which has an active connection.

Display Enterprise Extender connection information by IPADDR:

DISPLAY NET,EE

,IPADDR= local_ipaddr

,HOSTNAME=(,remote_hostname)
(local_ipaddr)
,HOSTNAME=(,remote_hostname)
(local_ipaddr,remote_ipaddr)
(,remote_ipaddr)

,LIST=SUMMARY ,MAX=DSPLYDEF_start_option_value



,LIST=SUMMARY ,MAX= *
,LIST=DETAIL number_of_EE_connections

Display Enterprise Extender connection information by HOSTNAME:

DISPLAY NET,EE

,HOSTNAME= local_hostname

,IPADDR=(,remote_ipaddr)
(local_hostname)
,IPADDR=(,remote_ipaddr)
(local_hostname,remote_hostname)
(,remote_hostname)

100 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

,LIST=SUMMARY ,MAX=DSPLYDEF_start_option_value



,LIST=SUMMARY ,MAX= *
,LIST=DETAIL number_of_EE_connections

| D EEDIAG
| Display Enterprise Extender (EE) connections that meet or exceed a specified
| retransmission threshold:

|

DISPLAY NET,EEDIAG ,REXMIT=retransmission_rate_percentage

|

| ,LIST=SUMMARY
|
,CLEAR=ALL

,CLEAR=REXMIT ,LIST=SUMMARY
,CLEAR=SRQRETRY ,LIST=DETAIL

| ,MAX=lesser_of_20_or_DSPLYDEF_start_option_value
|


,MAX= *
number_of_EE_connections

|


| EEDIAG command filters

| The retransmission_rate_percentage value specifies that only EE connections that have

| a retransmission rate equal to or exceeding the specified percentage should be
| displayed.

| Tip: Specify the CLEAR operand on this command to clear the diagnostic counters.
| The REXMIT information is displayed before the diagnostic counters are cleared.

| Display Enterprise Extender connections that meet or exceed a specified

| SRQRETRY threshold:

|

DISPLAY NET,EEDIAG SRQRETRY=retries ,CLEAR=ALL

| SRQRETRY=* ,CLEAR=REXMIT
,CLEAR=SRQRETRY

| ,LIST=SUMMARY ,MAX=lesser_of_20_or_DSPLYDEF_start_option_value
|


,LIST=SUMMARY ,MAX= *
,LIST=DETAIL number_of_EE_connections

|


| EEDIAG command filters

| The retries value indicates that only EE connections with LDLC signal retries equal
| to or exceeding the specified value should be displayed.

Chapter 5. Display commands 101

 Display commands

| Tip: Specify the CLEAR operand on this command to clear the diagnostic counters.
| The SRQRETRY information is displayed before the diagnostic counters are
| cleared.

| Clearing Enterprise Extender diagnostic counters:

|

DISPLAY NET,EEDIAG ,CLEAR=ALL


,CLEAR=REXMIT EEDIAG command filters
,CLEAR=SRQRETRY
|

| EEDIAG command filters:

| Limit the D EEDIAG command scope to one EE connection that is identified by

| LINE or PU name:

|

,ID=name

|

| The name value represents either an Enterprise Extender LINE or a switched PU

| that has an active EE connection.

| Limit the D EEDIAG command scope to EE connections that are identified by

| IPADDR:

|

,IPADDR= local_ipaddr

,HOSTNAME=(,remote_hostname)
(local_ipaddr)
,HOSTNAME=(,remote_hostname)
(local_ipaddr,remote_ipaddr)
(,remote_ipaddr)
|

| Limit the D EEDIAG command scope to EE connections that are identified by

| HOSTNAME:

|

,HOSTNAME= local_hostname

,IPADDR=(,remote_ipaddr)
(local_hostname)
,IPADDR=(,remote_ipaddr)
(local_hostname,remote_hostname)
(,remote_hostname)
|
|
D EXIT
Display the name, exit level, module name, and status of installation-wide exit
routines:

,ID=*


DISPLAY NET,EXIT

,ID= *
exit_name

102 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

D GRAFFIN
Display affinity information for generic resources:

,LU=*.* ,GNAME=*.*


DISPLAY NET,GRAFFIN

,LU=name ,GNAME=name

,MAX=DSPLYDEF_start_option_value



,MAX= *
max_affinities

D GROUPS
Provide information about line groups:

DISPLAY NET,GROUPS

(1)
,ID= name
,

(  name )

,MAX=DSPLYDEF_start_option_value ,SCOPE=ALL



,MAX= * ALL
number_of_resources ,SCOPE=
ACT
ACTONLY
ALL
CONCT
INACT
INACTONLY
PENDING
RESET

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D ID
Display a resource:

Chapter 5. Display commands 103

Display commands

,HPRDIAG=NO ,IDTYPE=RESOURCE


DISPLAY NET,ID=name

,HPRDIAG=YES ,IDTYPE= CDRM
CP
DIRECTRY
GENERIC
LUALIAS
RESOURCE
SHADOW
SSCP
USERVAR
XCFCP

,SCOPE=ONLY



,NETID=netid ALL
,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
ONLY
PENDING
RELSD
RESET

Display a resource name in any network:

,IDTYPE=RESOURCE


DISPLAY NET,ID=*.name

,IDTYPE= DIRECTRY
RESOURCE

,MAX=1 ,SCOPE=ONLY



,MAX=number_of_resources ALL
,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
ONLY
PENDING
RELSD
RESET

Display a resource name using an IP address:

(1)


DISPLAY NET,ID=ipaddress,IDTYPE=IPADDR


104 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

Notes:
1 The ID type of IPADDR is not related to the IPADDR start option.

D INOPCODE
Determine the dump attributes for all VTAM INOPCODESs or all VTAM
INOPCODEs in a given VTAM module:

DISPLAY NET,INOPCODE

,MODULE=modulename

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_modules

D INOPDUMP
Determine the global status for INOPDUMP:

DISPLAY NET,INOPDUMP


D LINES
Display the status of lines and channel links in the domain:

,LIST=ALL


DISPLAY NET,LINES

(1) ,LIST= ALL
,ID= name COUNT
,

(  name )

,MAX=DSPLYDEF_start_option_value



,MAX= * ,OWNER= host_name
number_of_resources *NONE

,SCOPE=ALL



ALL ,USE= DEFINED
,SCOPE= SPARE
ACT
ACTONLY
ALL
CONCT
IACTIVE
IINACT
INACT
INACTONLY
PENDING
RESET

Chapter 5. Display commands 105

Display commands

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D LMTBL
Display partner LUs in LU-mode table:

,SCOPE=ONLY


DISPLAY NET,LMTBL ,ID=appl_name ,TYPE=LUNAME

ALL
,SCOPE=

ONLY
ALL

Display logon mode names in LU-mode table:

DISPLAY NET,LMTBL ,ID=appl_name ,LUNAME=lu_name ,TYPE=LOGMODE


D LUGROUPS
Display all LUGROUP major nodes:

,SCOPE=ONLY


DISPLAY NET,LUGROUPS

,SCOPE= ONLY
ALL MAX operand

MAX operand:

MAX operand


MAX operand

,MAX=DSPLYDEF_start_option_value

,MAX= *
number_of_resources

Display a specific LUGROUP major node:

DISPLAY NET,LUGROUPS ,ID=lugroup_major_node_name

,SCOPE=ONLY



,SCOPE= ONLY
ALL MAX operand

106 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

MAX operand:

MAX operand


MAX operand

,MAX=DSPLYDEF_start_option_value

,MAX= *
number_of_resources

Display a model LU group:

DISPLAY NET,LUGROUPS ,ID=model_lu_group

,SCOPE=ONLY



,SCOPE= ONLY
ALL MAX operand

MAX operand:

MAX operand


MAX operand

,MAX=DSPLYDEF_start_option_value

,MAX= *
number_of_resources

Display a model LU:

DISPLAY NET,LUGROUPS ,ID=model_lu_name ,GROUP=model_lu_group

,SCOPE=ONLY



,SCOPE= ONLY
ALL MAX operand

MAX operand:

MAX operand


Chapter 5. Display commands 107

Display commands

MAX operand

,MAX=DSPLYDEF_start_option_value

,MAX= *
number_of_resources

D MAJNODES
Display the status of all active major nodes in the domain:

,MAX=DSPLYDEF_start_option_value


DISPLAY NET,MAJNODES

,MAX= *
number_of_resources

D MODELS
Provide information about model resources, excluding model applications and
model CDRSCs:

,SCOPE=ONLY


DISPLAY NET,MODELS

,ID=model_name ,SCOPE= ONLY
ALL

D NCPSTOR
Display either the storage contents of a communication controller running an NCP,
or an NCP dump stored in an IBM 3720 or 3745 Communication Controller:

DISPLAY NET,NCPSTOR ,ADDR=address ,ID=ncp_name

,LENGTH=32 ,STORAGE=MAIN



,LENGTH=number_of_bytes ,STORAGE= DUMPMAIN
DUMPVEC
MAIN

D NETSRVR
Display information about network node servers:

,SCOPE=ALL


DISPLAY NET,NETSRVR

,SCOPE= ALL
ONLY

108 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

D PATHS
Display dial-out path information about a switched physical unit:

DISPLAY NET,PATHS ,ID=switched_pu_name


D PATHTAB
Display the status of explicit routes and their associated virtual routes for this host:

DISPLAY NET,PATHTAB

,ADJSUB=subarea_number
,DESTSUB=subarea_number

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

D PENDING
Display information about resources in the domain that are in a “pending” state:

DISPLAY NET,PENDING

,ID= name
,

(  name )

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

D ROUTE
Display the status of routes:

,ER=ALL


DISPLAY NET,ROUTE

,DESTSUB=subarea_number ,COSNAME=name
,ER=ALL
,ER=er_number
,VR=vr_number

,TEST=NO



,NETID=netid ,ORIGIN=subarea_pu_name ,TEST= NO
,ORIGIN=ALL YES

Display blocked virtual routes:

Chapter 5. Display commands 109

Display commands

DISPLAY NET,ROUTE ,BLOCKED

(1)
,NETID=netid


,ORIGIN=subarea_pu_name
,ORIGIN=ALL

Notes:
1 When the BLOCKED operand is specified, the NETID of the host where the
command was entered is assumed, and specification of another NETID is not
permitted.

Display held virtual routes:

DISPLAY NET,ROUTE ,HELD


D RSCLIST
Display information about resources whose names match a particular pattern:

DISPLAY NET,RSCLIST ,ID= name

, ,EXCLUDE= name
,
 ( name )
(  name )

110 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

| ,IDTYPE=*



,IDTYPE= ADJCPS ,MAJNODE=nodename
ADJCPSEG
APPLCLN
APPLDYN
APPLMOD
APPLS
APPLSEG
CDRMS
CDRMSEG
CDRSCCLN
CDRSCMOD
CDRSCS
CDRSCSEG
CLSTRS
DLURS
GENERIC
GROUPS
LCLSNA
LCL3270
LINES
LINKSTA
LUGROUPS
MAJNODES
MODELSEG
PUT45
SWSEG
TCPIPSEG
TERMS
TRLSEG
XCASEG
*

,MAX=DSPLYDEF_start_option_value ,SCOPE=ALL



,MAX= * ALL
number_of_resources ,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
PENDING
RELSD
RESET

D RTPS
Display information concerning HPR pipes:

DISPLAY NET,RTPS

,ALSNAME=name ,APPNCOS=name ,CPNAME=name

Chapter 5. Display commands 111

Display commands

,CONGEST=ALL



,CONGEST= YES ,FIRSTCP=name ,FIRSTTG=number
NO
ALL

,LIST=DETAIL



,TEST=NO ,LIST=SUMMARY
,ID=name ,LIST=DETAIL
,TCID=tcid ,TEST= YES
NO

,MAX=DSPLYDEF_start_option_value ,STALL=ALL



,MAX= * ,STALL= YES
number_of_resources NO
ALL

,SWITCH=ALL



,SWITCH= YES
NO
ALL

D SAMAP
Display the subarea mapping table from an ICN host:

DISPLAY NET,SAMAP


D SATOAPPN
Display the subarea-to-APPN class-of-service mapping table:

DISPLAY NET,SATOAPPN


D SESSIONS
Display all sessions:

DISPLAY NET,SESSIONS

,LU1=lu_name
,LU2=lu_name
,LU2=lu_name
,LU1=lu_name
,PLU=plu_name
,SLU=slu_name
,SLU=slu_name
,PLU=plu_name

112 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

,LIST=COUNT ,SCOPE=ALL



,LIST= ALL operand ,SCOPE= ACT
COUNT ALL
SUMMARY PENDING
Q

ALL operand

ALL MAX operand

MAX operand:

MAX operand


MAX operand

,MAX=DSPLYDEF_start_option_value

,MAX= *
number_of_resources

Display a specific session:

,PATHINFO=YES


DISPLAY NET,SESSIONS ,SID=session_id

,PATHINFO= NO
YES

D SNSFILTR
Display the current active SAW sense filter:

DISPLAY NET,SNSFILTR


D SRCHINFO
Display summary information about outstanding subarea and APPN searches:

(3)
,TYPE=SUBAREA
(2)
,TYPE=APPN
(1)
,LIST=SUMMARY ,TYPE=ALL


DISPLAY NET,SRCHINFO

,TYPE= ALL
APPN
SUBAREA

Chapter 5. Display commands 113

Display commands

(4)



,FROMCP=cp_name ,FROMSSCP=sscp_name
,TOCP=cp_name ,TOSSCP=sscp_name

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_searches

Notes:
1 TYPE=ALL is the default when the HOSTSA and NODETYPE start options
are specified.
2 TYPE=APPN is the default when the NODETYPE start option is specified
without the HOSTSA start option.
3 TYPE=SUBAREA is the default when the HOSTSA start option is specified
without the NODETYPE start option.
4 These operands are valid with TYPE=APPN or TYPE=ALL.

Display detailed information about outstanding subarea and APPN searches:

DISPLAY NET,SRCHINFO ,LIST=ALL

,DLU=lu_name
,OLU=lu_name
,OLU=lu_name
,DLU=lu_name
,LU1=lu_name
,LU2=lu_name
,LU2=lu_name
,LU1=lu_name

114 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

(3)
,TYPE=SUBAREA
(2)
,TYPE=APPN
(1)
,TYPE=ALL (4)



,TYPE= ALL ,FROMCP=cp_name ,FROMSSCP=sscp_name
APPN ,TOCP=cp_name ,TOSSCP=sscp_name
SUBAREA

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_searches

Notes:
1 TYPE=ALL is the default when the HOSTSA and NODETYPE start options
are specified.
2 TYPE=APPN is the default when the NODETYPE start option is specified
without the HOSTSA start option.
3 TYPE=SUBAREA is the default when the HOSTSA start option is specified
without the NODETYPE start option.
4 These operands are valid with TYPE=APPN or TYPE=ALL.

Display search information about a specific search request:

(3)
,TYPE=SUBAREA
(2)
,TYPE=APPN
(1)
,TYPE=ALL


DISPLAY NET,SRCHINFO ,SID=session_identifer

,TYPE= ALL
APPN
SUBAREA

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_searches

Notes:
1 TYPE=ALL is the default when the HOSTSA and NODETYPE start options
are specified.
Chapter 5. Display commands 115
Display commands

2 TYPE=APPN is the default when the NODETYPE start option is specified

without the HOSTSA start option.
3 TYPE=SUBAREA is the default when the HOSTSA start option is specified
without the NODETYPE start option.

D STATIONS
Display the status of all cross-subarea link stations for active major nodes:

DISPLAY NET,STATIONS

(1)
,ID= name
,

(  name )

,MAX=DSPLYDEF_start_option_value ,SCOPE=ALL



,MAX= * ALL
number_of_resources ,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
PENDING
RELSD
RESET

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D STATS
Display resource statistics:

,MAX=DSPLYDEF_start_option_value


DISPLAY NET,STATS ,TYPE=VTAM

, MAX = *
NUM number_of_resources

Display data compression statistics:

DISPLAY NET,STATS ,TYPE=COMPRESS


Display coupling facility structure statistics:

DISPLAY NET,STATS ,TYPE=CFS

116 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

,STRNAME=STRGR_start_option_value



,STRNAME= structure_name
*
EZBDVIPA
Entry Options
EZBEPORT
Entry Options

Entry Options:

,DVIPA=dvipa_address
,LIST=list_number
,FROM=1
,LIST=ALL
,FROM=starting_list_number
Scope Options
Max Options

Scope Options:

,SCOPE=ONLY

,SCOPE= ALL
ONLY

Max Options:

,MAX=DSPLYDEF_start_option_value

, MAX = *
NUM number_of_resources

D STORUSE
Display storage usage for applications:

DISPLAY NET,STORUSE ,APPL= *

,

(  appl_name )

,MAX=DSPLYDEF_start_option_value



, MAX = *
NUM number_of_resources

Display storage usage for application jobs:

DISPLAY NET,STORUSE ,JOBNAME= *

,

(  appl_job_name )

Chapter 5. Display commands 117

Display commands

,MAX=DSPLYDEF_start_option_value



, MAX = *
NUM number_of_resources

Display storage usage for data spaces:

DISPLAY NET,STORUSE ,DSPNAME= *

,

(  data_space_name )

,MAX=DSPLYDEF_start_option_value



, MAX = *
NUM number_of_resources

Display storage usage for storage pools:

,POOL=* ,LIST=ALL


DISPLAY NET,STORUSE

,POOL= POOL operands ,LIST= ALL
INUSE

,MAX=DSPLYDEF_start_option_value ,POOLTYPE=ALL



, MAX = * ,POOLTYPE= ALL
NUM number_of_resources CSA
PRIVATE

POOL operands:

*
SUMMARY
( storage_pool_name )
,SUMMARY

D TABLE
Display the table type and the number of resources that are associated with the
table (use count) and identify the users of a table:

,SCOPE=ONLY


DISPLAY NET,TABLE ,ID=table_name

,SCOPE= ONLY
ALL MAX operand

MAX operand:

MAX operand


118 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

MAX operand

,MAX=DSPLYDEF_start_option_value

,MAX= *
number_of_resources

D TERMS
Display the status of device-type logical units (terminals) that are in active major
nodes:

DISPLAY NET,TERMS

(1)
,ID= name
,

(  name )

,MAX=DSPLYDEF_start_option_value ,SCOPE=ALL



,MAX= * ALL
number_of_resources ,SCOPE=
ACT
ACTONLY
ACTSESS
ALL
CONCT
INACT
INACTONLY
PENDING
RESET

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D TGPS
Display the currently defined TG profiles by name, along with the transmission
group characteristics that they represent:

DISPLAY NET,TGPS

(1)
,ID= tg_profile_name
,

(  tg_profile_name )

Chapter 5. Display commands 119

Display commands

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D TNSTAT
Display the current state of global and TRLE tuning statistics, and the CNSL and
TIME values. If SMF is not in the system, this will also be indicated.

DISPLAY NET,TNSTAT


D TOPO
Display a summary of the topology database:

,LIST=SUMMARY


DISPLAY NET,TOPO


Display a specific node:

DISPLAY NET,TOPO ,ID=cp_name


,APPNCOS=cos_name ,LIST=ALL

Display adjacent nodes:

DISPLAY NET,TOPO ,ID=cp_name ,LIST=ADJ


,APPNCOS=cos_name

Display all nodes of a specific type:

DISPLAY NET,TOPO ,LIST= BN

CDSERVR ,APPNCOS=cos_name
EN
ICN
NN
VN

,ID=*.*



(1)
,ID= name
*

120 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

Display all nodes with a specific locsize:

DISPLAY NET,TOPO ,LIST= EN ,LOCSIZE= *


NN locate_size

Display TDU statistics information:

,SCOPE=ACTIVITY


DISPLAY NET,TOPO ,LIST=TDUINFO

,SCOPE= RECENT
ACTIVITY

,NUM=10 ,CLEAR=NO



,NUM= number_of_entries ,CLEAR= YES
NO

Display a specific TG or TGs:

DISPLAY NET,TOPO ,ORIG=cp_name ,DEST=cp_name

,TGN=tg_number


,APPNCOS=cos_name

Display unreachable partner information for an Enterprise Extender connection

network path:

,ID=*.*


DISPLAY NET,TOPO ,LIST=UNRCHTIM

(1)
,ID= name
*

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_unreachable_partner_paths

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

D TRACES
Display the status of BUF, GPT, IO, LINE, SIT, STATE, and TG traces:

Chapter 5. Display commands 121

Display commands

DISPLAY NET,TRACES ,TYPE=NODES ,ID= ID values


ID values:

*
(*)
,IDTYPE=RESOURCE
name
, ,IDTYPE= CP
SSCP
(  name ) RESOURCE

Display the status of a communication network management trace:

DISPLAY NET,TRACES ,TYPE=CNM


Display the status of the user Exit buffer trace:

DISPLAY NET,TRACES ,TYPE=EXIT ,ID= ISTEXCAA


ISTEXCCS
ISTEXCDM

Display the status of a module trace:

DISPLAY NET,TRACES ,TYPE=MODULE


Display the status of a network controller line trace:

DISPLAY NET,TRACES ,TYPE=NETCTLR ,ID=3710_pu_name


Display the status of an SMS (buffer use) trace:

,ID=VTAMBUF


DISPLAY NET,TRACES ,TYPE=SMS


Display the status of a resource state trace:

DISPLAY NET,TRACES ,TYPE=STATE


Display the status of a TSO user trace:

DISPLAY NET,TRACES ,TYPE=TSO ,ID= *


(*)
(1)
user_id
,

(  user_id )

122 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

Notes:
1 Depending on the value of the DSPLYWLD start option, wildcard values can
be used for this operand.

Display the status of the VTAM internal trace:

,TYPE=VTAM


DISPLAY NET,TRACES


Display the status of all active traces:

DISPLAY NET,TRACES ,TYPE=ALL


D TRL
Display the entries in the active TRL major nodes:

,CONTROL=ALL


DISPLAY NET,TRL

,CONTROL= ALL
MPC
TCP
,ULPID=name
XCF

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

Display information about a specific user-defined TRLE:

DISPLAY NET,TRL ,TRLE=trl_entry_name


Display information about a dynamic XCF TRLE:

DISPLAY NET,TRL ,XCFCP=cp_name


Display the entries in one or more specific TRL major nodes:

DISPLAY NET,TRL

,TRLMN= name
,

(  name )

Chapter 5. Display commands 123

Display commands

,MAX=DSPLYDEF_start_option_value



,MAX= *
number_of_resources

D TSOUSER
Display the status of a TSO user ID:

DISPLAY NET,TSOUSER ,ID=user_id


D USERVAR
Display all USERVARs:

,MAX=DSPLYDEF_start_option_value


DISPLAY NET,USERVAR

,MAX= *
number_of_resources

Display a specific USERVAR:

DISPLAY NET,USERVAR ,ID=uservar_name


D VTAMOPTS
Display selected start options:

,FORMAT=CURRENT


DISPLAY NET,VTAMOPTS

,FORMAT= CURRENT
COMPLETE
MODIFIED

,OPTION=*



,OPTION= *
(*)
option
,

(  option )

Display a group of related start options:

124 z/OS V1R7.0 Comm Svr: Quick Reference

 Display commands

,FORMAT=CURRENT


DISPLAY NET,VTAMOPTS ,FUNCTION= APPNCHAR

,FORMAT= CURRENT CONNECT
COMPLETE MESSAGES
MODIFIED PERFTUNE
RECSTATS
SECURITY
SESSCONT
SSCPCP
STORAGE
TRACDUMP
VTAMINIT
ZAPCON

D VTAMSTOR
Display storage contents associated with a storage address:

DISPLAY NET,VTAMSTOR ,ADDRESS=storage_address

,LENGTH=32



,LENGTH=decimal_number_of_bytes
,XLENGTH=hex_number_of_bytes

Display storage associated with a module:

DISPLAY NET,VTAMSTOR ,MODULE=module_name


Display storage associated with a network address:

DISPLAY NET,VTAMSTOR ,NETADDR=( NETADDR operands )


,NETID=network_id

NETADDR operands:

,X
,element_address
subarea_address ,D
,X

Display storage associated with a resource name:

DISPLAY NET,VTAMSTOR ,RESOURCE=resource_name


Chapter 5. Display commands 125

Display commands

126 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 6. Halt commands
HALT (Z)
Request a normal halt of VTAM without disrupting active LU-LU sessions:

,CDLINK=ACT


HALT NET

,CDLINK= ACT
INACT

Z CANCEL
Request a halt of VTAM via abend:

,DUMP=NO


HALT NET,CANCEL

,DUMP= NO
YES

Z QUICK
Request a halt of VTAM disrupting active LU-LU sessions:

,CDLINK=ACT


HALT NET,QUICK

,CDLINK= ACT
INACT

© Copyright IBM Corp. 1984, 2005 127

Halt commands

128 z/OS V1R7.0 Comm Svr: Quick Reference

 Chapter 7. Modify commands
F ALSLIST
Add an entry to an adjacent link station list:

MODIFY procname,ALSLIST ,ACTION=ADD ,ID= *

cdrsc_major_node
cdrsc_name

,NEWALS=adjacent_link_station_name


Delete an entry from an adjacent link station list:

MODIFY procname,ALSLIST ,ACTION=DELETE ,ID= *

cdrsc_major_node
cdrsc_name

,OLDALS=adjacent_link_station_name


Replace an entry in an adjacent link station list:

MODIFY procname,ALSLIST ,ACTION=REPLACE ,ID= *

cdrsc_major_node
cdrsc_name

,NEWALS=adjacent_link_station_name ,OLDALS=adjacent_link_station_name


| Create a dynamic (or clone) CDRSC and add entry in adjacent link station list:

MODIFY procname,ALSLIST ,ACTION=CREATE ,ID=cdrsc_name

,NEWALS=adjacent_link_station_name


F APINGDTP
Change the number of APINGD transaction programs permitted to run
concurrently for responding to APING requests from other nodes:

MODIFY procname,APINGDTP ,INSTANCE= UNLIMITED


value

F APINGTP
Change the number of APING transaction programs permitted to run concurrently
for sending APING command requests to other nodes:

© Copyright IBM Corp. 1984, 2005 129

Modify commands

MODIFY procname,APINGTP ,INSTANCE= UNLIMITED


value

F BFRUSE
Dynamically change the total amount of common service area (CSA) storage that
VTAM is allowed to use for the IO buffer pool:

,BUFFER=IOBUF


MODIFY procname,BFRUSE, ,XPANLIM=value

,BUFFER= IO00
IO

F CDRM
Change the owner (external CDRM) of a particular cross-domain resource (CDRSC)
or set of CDRSCs:

MODIFY procname,CDRM= new_cdrm

(new_cdrm)
(new_cdrm,old_cdrm)

,TYPE=NORM

,ID= *

cdrsc_major_node_name ,TYPE= IMMED
cdrsc_minor_node_name NORM

F CHKPT
Save a copy of the directory database or the topology database (or both) to a
checkpoint data set:

,TYPE=ALL


MODIFY procname,CHKPT

,TYPE= ALL
DIR
TOPO

F CNOS
Set session limits to zero for one logon mode:

MODIFY procname,CNOS ,ID=appl_name ,LIMITS=(0,0,0)

,DRAINL=NO

,LOGMODE=logon_mode_name ,LUNAME=lu_name

,DRAINL= NO
YES

130 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,DRAINR=NO ,NBRMODE=ONE ,RESP=LOCAL

,DRAINR= NO ,RESP= LOCAL
YES REMOTE

,SNGSESLU=NO



,SNGSESLU= NO
YES

Set session limits to zero for all logon modes:

MODIFY procname,CNOS ,ID=appl_name ,LIMITS=(0,0,0) ,LUNAME=lu_name

,DRAINL=NO ,DRAINR=NO

,NBRMODE=ALL

,DRAINL= NO ,DRAINR= NO
YES YES

,RESP=LOCAL ,SNGSESLU=NO



,RESP= LOCAL ,SNGSESLU= NO
REMOTE YES

Set session limits to nonzero:

MODIFY procname,CNOS ,ID=appl_name ,LIMITS=(sesslim,minwinl,minwinr)

,LOGMODE=logon_mode_name ,LUNAME=lu_name

,CONVSECL= NONE
CONV
ALREADYV
PERSISTV
AVPV

,NBRMODE=ONE ,RESP=LOCAL ,SNGSESLU=NO


,RESP= LOCAL ,SNGSESLU= NO
REMOTE YES

Use existing session limits:

MODIFY procname,CNOS ,ID=appl_name ,LOGMODE=logon_mode_name

Chapter 7. Modify commands 131

Modify commands

,NBRMODE=ONE

,LUNAME=lu_name

,CONVSECL= NONE
CONV
ALREADYV
PERSISTV
AVPV

,SNGSESLU=NO



,SNGSESLU= NO
YES

F COMPRESS
Change the compression levels set by the APPL definition statement:

MODIFY procname,COMPRESS ,ID=appl_name

,CMPAPPLI=input_limit

,CMPAPPLO=output_limit
,CMPAPPLI=input_limit,CMPAPPLO=output_limit

Change the compression level set by start option:

MODIFY procname,COMPRESS ,CMPVTAM=overall_limit


F CSALIMIT
Dynamically change the amount of common service area (CSA) storage that VTAM
is allowed to use:

,OPTION=TOTAL


MODIFY procname,CSALIMIT= value

(value ) ,OPTION= BELOW
,F TOTAL

F CSDUMP
Dump the current address space and VIT data space, setup a trigger that will
invoke a dump of the current address space and VIT data space when a particular
sense code and message are issued:

MODIFY procname,CSDUMP

,SENSE=sense_code
,RU=ru_code

132 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,MESSAGE= message_id_number
,

( message_id_number,  message_value_field )

,MATCHLIM=1



,MATCHLIM=matchlim_value

Remove the CSDUMP trigger:

MODIFY procname,CSDUMP ,DELETE= ALL


MESSAGE
SENSE

F CSM
Dynamically change the amount of storage used by the communications storage
manager (CSM) or activate changes made to the CSM parmlib member without
requiring an IPL:

MODIFY procname,CSM

,ECSA=maxecsa ,FIXED=maxfix

Modify CSM Monitoring as follows:

DYNAMIC


MODIFY procname,CSM,MONITOR= YES

NO

F DEFAULTS
Modify the DLOGMOD value for a resource:

MODIFY procname,DEFAULTS ,ID=resource_name ,DLOGMOD=


logon_mode_name

Change the delay timer for disconnection of a switched PU:

MODIFY procname,DEFAULTS ,ID=resource_name ,DISCNTIM=time_period


F DEFINE
Set session limit to zero:

MODIFY procname,DEFINE ,ID=appl_name ,DLIMITS=(0,0,0)

Chapter 7. Modify commands 133

Modify commands

,LOGMODE=logon_mode_name ,LUNAME=lu_name

,DELETE=NALLOW



,AUTOSES=number_of_winner_sessions ,DELETE= ALLOW
NALLOW


,DDRAINL= ALLOW ,DRESPL= ALLOW
NALLOW NALLOW

Set session limits to nonzero:

MODIFY procname,DEFINE ,ID=appl_name

,DLIMITS=(dseslim,dminwinl,dminwinr) ,LOGMODE=logon_mode_name

,LUNAME=lu_name

,AUTOSES=number_of_winner_sessions

,DELETE=NALLOW



,DELETE= ALLOW ,DRESPL= ALLOW
NALLOW NALLOW

Use existing session limits:

MODIFY procname,DEFINE ,ID=appl_name ,LOGMODE=logon_mode_name

,LUNAME=lu_name

,AUTOSES=number_of_winner_sessions

,DELETE=NALLOW



,DELETE= ALLOW ,DRESPL= ALLOW
NALLOW NALLOW

Delete an unusable LU-mode entry:

MODIFY procname,DEFINE ,ID=appl_name ,LUNAME=lu_name ,DELETE=UNUSE


F DIRECTRY
Change the ownership of APPN resources in the directory database:

MODIFY procname,DIRECTRY ,FUNCTION=UPDATE ,ID= cdrsc_major_node_name

resource_name

134 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,CPNAME= new_cp_name

(new_cp_name,old_cp_name)
,NETSRVR=server_name
CPNAME and NETSRVR

CPNAME and NETSRVR:

,CPNAME= values ,NETSRVR=server_name

values:

new_cp_name
(new_cp_name,old_cp_name)

Delete a resource from the directory database:

MODIFY procname,DIRECTRY ,FUNCTION=DELETE ,ID= cdrsc_major_node_name


resource_name

F DR
Delete a logical unit from a physical unit, or a physical unit from a line:

MODIFY procname,DR ,TYPE=DELETE ,ID=lu_name,FROM=pu_name


,ID=pu_name,FROM=line_name

Move a physical unit:

MODIFY procname,DR ,TYPE=MOVE ,ID=pu_name ,FROM=line_name

,ACTIVATE=NO

,TO=line_name

,ACTIVATE= NO ,ADDR=link_station_address
YES

F DUMP
Static dump of remote NCP (via link station) to host:

MODIFY procname,DUMP ,ID=link_station_name ,DUMPDS=name

,ACTION=COMP ,OPTION=STATIC ,RMPO=NO ,TYPE=NCP


,RMPO= NO
YES

Static dump of NCP to host:

Chapter 7. Modify commands 135

Modify commands

,ACTION=COMP


MODIFY procname,DUMP ,ID=ncp_name

,DUMPDS=name

,OPTION=STATIC ,RMPO=NO



,DUMPSTA= ,RMPO= NO
link_station_name YES

,TYPE=NCP




Static dump of NCP to hard disk:

,OPTION=STATIC


MODIFY procname,DUMP ,ID=ncp_name ,ACTION=STORE


Dynamic dump of NCP to host:

,ACTION=COMP


MODIFY procname,DUMP ,ID=ncp_name ,OPTION=DYNA

,TYPE=NCP



(1)
,DUMPDS=name

Notes:
1 If the NCP has been acquired before activation, DUMPDS is required.

Transfer CSP or MOSS dump from hard disk to host:

,ACTION=COMP


MODIFY procname,DUMP ,ID=ncp_name ,TYPE= CSP

MOSS


(1)
,DUMPDS=name

Notes:
1 If the NCP has been acquired before activation, DUMPDS is required.

Transfer NCP, CSP, or MOSS dump from hard disk to host:

,TYPE=NCP


MODIFY procname,DUMP ,ID=ncp_name ,ACTION=TRANSFER

,TYPE= CSP
MOSS
NCP

136 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands


(1)
,DUMPDS=name

Notes:
1 If the NCP has been acquired before activation, DUMPDS is required.

Purge dump from hard disk:

,TYPE=NCP


MODIFY procname,DUMP ,ID=ncp_name ,ACTION=PURGE

,TYPE= CSP
MOSS
NCP

F ENCR
Change the cryptography specifications for logical units:

MODIFY procname,ENCR= COND ,ID=lu_name


OPT
REQD

F EXIT
Activate or replace an exit routine:

MODIFY procname,EXIT ,OPTION= ACT

REPL

,ID= ISTEXCDM

,PARMS=character_string ,MODULE=module_name
ISTEXCVR
ISTCMMND
,PARMS=character_string
ISTEXCAA
,PARMS=character_string
ISTEXCCS
,PARMS=character_string
ISTEXCGR
,PARMS=character_string
ISTEXCPM
,PARMS=character_string
ISTEXCSD
,PARMS=character_string
ISTEXCUV
,PARMS=character_string

Activate a multiple instance of ISTEXCPM:

MODIFY procname,EXIT ,OPTION=ACT ,ID=ISTEXCPM.instance_name

Chapter 7. Modify commands 137

 Modify commands


,PARMS=character_string

Replace a multiple instance of ISTEXCPM:

MODIFY procname,EXIT ,OPTION=REPL ,ID=ISTEXCPM.instance_name


,MODULE=module_name ,PARMS=character_string

Deactivate an exit routine:

MODIFY procname,EXIT ,OPTION= INACT

FORCE

,ID= ISTEXCDM

,PARMS=character_string
ISTEXCVR
ISTCMMND
,PARMS=character_string
ISTEXCAA
,PARMS=character_string
ISTEXCCS
,PARMS=character_string
ISTEXCGR
,PARMS=character_string
ISTEXCPM
,PARMS=character_string
ISTEXCSD
,PARMS=character_string
ISTEXCUV
,PARMS=character_string

Deactivate a multiple instance of ISTEXCPM:

MODIFY procname,EXIT ,OPTION= INACT ,ID=ISTEXCPM.instance_name

FORCE


,PARMS=character_string

| F GR
| Delete a generic resource:

|

MODIFY procname,GR ,GNAME=netid.generic_resource ,OPTION=DELETE


|
|
F IMR
Start intensive mode recording:

138 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,OPTION=ACT


MODIFY procname,IMR ,ID= link_station_name

pu_name

,RECLIM=10



,RECLIM=number_of_errors

Stop intensive mode recording:

MODIFY procname,IMR ,ID= link_station_name ,OPTION=INACT


pu_name

F INOPCODE
Controls the dump attribute of VTAM INOPCODEs:

ALL (1) (2) ALL

MODIFY procname,INOPCODE=( , , DUMPENABLE )

ALL ALL DUMPDISABLE
modulename inopcode DUMPDEFAULT

Notes:
1 When specifying an InOpCode for the second parameter, always specify three
digits by including any leading zeros.
2 If an InOpCode is specified for the second parameter, the first parameter
cannot be ALL.

F INOPDUMP
Controls the automatic dumping of VTAM when an inoperative condition occurs
in one of VTAMs data link control layers:

MODIFY procname,INOPDUMP= OFF


ON ,TRLE= trle_name
,

(  trle_name )

F IOPD
Change the I/O problem determination (IOPD) time-out interval:

MODIFY procname,IOPD ,IOINT=number_of_seconds


F IOPURGE
Set a time interval after which outstanding I/O is assumed to be lost and recovery
steps are taken:

Chapter 7. Modify commands 139

Modify commands

MODIFY procname,IOPURGE=timeout_value


F LINEDEF
Dynamically change the definition of a redefinable line:

MODIFY procname,LINEDEF ,ID=line_name ,USE= DEFINED


SPARE

F LL2
Start a continuous link level 2 test:

MODIFY procname,LL2 ,ID=name ,OPTION=CONT

,DATA=data

,NFRAMES=1



,NFRAMES=number_of_test_messages

Start a brief link level 2 test:

MODIFY procname,LL2 ,ID=name

,DATA=data

,NFRAMES=1 ,NTRANS=10



,NFRAMES=number_of_test_messages ,NTRANS=number_of_test_messages

Stop a link level 2 test:

MODIFY procname,LL2 ,ID=name ,OPTION=CANCEL


F LOAD
Store a load module on the hard disk, and optionally for a 3745, schedule an IPL:

,ACTION=ADD


MODIFY procname,LOAD ,ID=ncp_name


,IPLTIME= (date,time) NOTIFY operand ,LOADMOD=load_module_name

NOTIFY operand:

140 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,NOTIFY=60

,NOTIFY=
NO
time_period

Replace a load module on the hard disk, and optionally for a 3745, schedule an
IPL:

MODIFY procname,LOAD ,ID=ncp_name ,ACTION=REPLACE


,IPLTIME= (date,time) NOTIFY operand ,LOADMOD=load_module_name

NOTIFY operand:

,NOTIFY=60

,NOTIFY=
NO
time_period

Purge a load module from the hard disk:

MODIFY procname,LOAD ,ID=ncp_name ,ACTION=PURGE


,LOADMOD=load_module_name

Cancel an ADD or REPLACE operation in progress:

MODIFY procname,LOAD ,ID=ncp_name ,ACTION=CANCEL


,LOADMOD=load_module_name

Schedule or cancel an automatic IPL for an NCP load module in a 3745:

MODIFY procname,LOAD ,ID=ncp_name ,ACTION=SETTIME

,IPLTIME= (date,time) NOTIFY operand


CANCEL ,LOADMOD=load_module_name

NOTIFY operand:

,NOTIFY=60

,NOTIFY=
NO
time_period

Chapter 7. Modify commands 141

Modify commands

Rename a load module on the 3745 hard disk for MOSS:

MODIFY procname,LOAD ,ID=ncp_name ,ACTION=RENAME

,LOADMOD=load_module_name ,NEWNAME=new_load_module_name


F MSGMOD
Specify whether VTAM messages contain an identifier that indicates the VTAM
module that originated the message:

MODIFY procname,MSGMOD= NO

YES

F NCP
Send a request to NCP to execute the specified command for the specified
resource:

MODIFY procname,NCP ,ID=ncp_name ,COMMAND=TRSWITCH ,RESNM=resource_name


F NEGPOLL
Request that an NCP change the negative polling limit (the maximum number of
consecutive negative polling responses accepted before polling another terminal on
the line) for a nonswitched, multipoint line to one or more attached start/stop or
BSC terminals:

MODIFY procname,NEGPOLL=number_of_responses ,ID=line_name


F NOTNSTAT
Terminate global or TRLE tuning statistics:

MODIFY procname,NOTNSTAT

,TRLE= trle_name
,

(  trle_name )

F NOTRACE
Stop a buffer contents trace:

MODIFY procname,NOTRACE ,TYPE=BUF ,ID=node_name

142 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,IDTYPE=RESOURCE ,SCOPE=ONLY



,IDTYPE= CP ,SCOPE= ALL
RESOURCE ONLY
SSCP

Stop a communication network management trace:

MODIFY procname,NOTRACE ,TYPE=CNM ,ID= PDPIUBUF


SAWBUF

Stop a user Exit buffer trace:

MODIFY procname,NOTRACE ,TYPE=EXIT ,ID=ISTEXCAA

,OPTION= ALL

option
(option)
,

(  ACCTING )
ADJSSCP
ALIAS
ALS
BEGIN
END
GWPATH
INITAUTH
REPL
SECAUTH
VRSEL
XRF

MODIFY procname,NOTRACE ,TYPE=EXIT ,ID=ISTEXCCS

,OPTION= ALL

option
(option)
,

(  BEGIN )
CONNSTAT
DYNA_XID
PRED_XID
END

MODIFY procname,NOTRACE ,TYPE=EXIT ,ID=ISTEXCDM

Chapter 7. Modify commands 143

Modify commands

,OPTION= ALL

option
(option)
,

(  BEGIN )
INITAUTH
BN_SEL
ADS_SEL
CDS_SEL
CRR_SEL
REPL
END

Stop a generalized PIU trace:

MODIFY procname,NOTRACE ,TYPE=GPT ,ID=node_name

,IDTYPE=RESOURCE



,IDTYPE= CP ,ALSNAME=adjacent_link_station_name
RESOURCE
SSCP

,SCOPE=ONLY



,SCOPE= ALL
ONLY

Stop an input/output trace:

MODIFY procname,NOTRACE ,TYPE=IO ,ID=node_name

,IDTYPE=RESOURCE



,DEVICE= ALL ,IDTYPE= CP
hex_device_address RESOURCE
SSCP

,SCOPE=ONLY



,SCOPE= ALL
ONLY

Stop a module trace:

144 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

MODIFY procname,NOTRACE ,TYPE=MODULE ,OPTION= ALL


option
(option)
,

(  COMMAND )
CONNECTION
DEFINITION
INTERFACES
MANAGEMENT
NOEXIT
SESSION

Stop an NCP line trace:

MODIFY procname,NOTRACE ,TYPE=LINE ,ID=line_name


Stop a 3710 Network Controller line trace:

MODIFY procname,NOTRACE ,TYPE=NETCTLR ,ID=pu_name ,LINE=line_name

,PU=3710_pu_name


Stop a scanner interface trace:

MODIFY procname,NOTRACE ,TYPE=SIT ,ID=line_name


Stop an SMS (buffer use) trace:

,ID=VTAMBUF


MODIFY procname,NOTRACE ,TYPE=SMS


Stop a resource state trace:

MODIFY procname,NOTRACE ,TYPE=STATE

,ID=node_name Operands used with ID


OPTION operand

Operands used with ID:

Chapter 7. Modify commands 145

Modify commands

,IDTYPE=RESOURCE

,IDTYPE= CP ,OPTION= ALL

RESOURCE option
SSCP (option)
,

(  ADJCP )
APPL
CDRM
CDRSC
GROUP
LINE
LNKST
LU
NCP
PU

OPTION operand:

,OPTION= ALL
option
(option)
,

(  ADJCP )
APPL
CDRM
CDRSC
GROUP
LINE
LNKST
LU
NCP
PU

Stop a transmission group trace:

MODIFY procname,NOTRACE ,TYPE=TG ,ID=line_name


Stop a TSO user ID trace:

MODIFY procname,NOTRACE ,TYPE=TSO ,ID=tso_user_id


Stop a VTAM internal trace:

,MODE=INT
(1)
,MODE=EXT


MODIFY procname,NOTRACE ,TYPE=VTAM

,MODE= INT
EXT

146 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands


(2)
,SUBTRACE=ARBP,OPTION= HPR
(3)
(..,HPR,..)
(4)
,SUBTRACE= TGVC ,OPTION= SSCP
TREE (5)
(..,SSCP,..)
,OPTION= ALL
(6)
END
(7)
FORCE
option
(option)
,

(  API )
APPC
CFS
CIA
CIO
CMIP
CSM
ESC
HPR
LCS
LOCK
MSG
NRM
PIU
PSS
SMS
SSCP
TCP
VCNS
XBUF
XCF

Notes:
1 If you do not specify the mode, both internal and external recording are
stopped. However, any default options that you have stopped are
immediately restarted by VTAM and recorded on the internal trace table.
2 OPTION=HPR must be specified when SUBTRACE=ARBP is specified.
3 If multiple trace options are coded in parentheses, HPR must be one of the
options coded inside the parentheses when SUBTRACE=ARBP is coded.
4 OPTION=SSCP must be specified when SUBTRACE=TGVC or
SUBTRACE=TREE is coded
5 If multiple trace options are coded in parentheses, SSCP must be one of the
options coded inside the parentheses when SUBTRACE=TGVC or
SUBTRACE=TREE is coded.

Chapter 7. Modify commands 147

Modify commands

6 To stop external recording with OPTION=END, MODE=EXT must be

explicitly specified.
7 OPTION=FORCE is not valid when MODE=EXT is specified.

F POLL
Request that an NCP change the polling delay (the time delay between polling
sequences) for a nonswitched, polled line to one or more attached BSC IBM 3270
terminals:

MODIFY procname,POLL=number_of_seconds ,ID=line_name


F PPOLOG
Request that VTAM start or stop sending copies of VTAM operator commands and
VTAM messages to the primary program operator (PPO):

MODIFY procname,PPOLOG= YES


NO

F PROFILES
Refresh an active application’s set of RACF® profiles:

MODIFY procname,PROFILES ,ID=appl_name


F RESOURCE
Modify the DLOGMOD value for a resource:

MODIFY procname,RESOURCE ,ID=resource_name ,DLOGMOD=


logon_mode_name

Add or change the ADJLIST value for a cross-domain resource:

MODIFY procname,RESOURCE ,ID=resource_name ,ADJLIST=list_name

,ACTION=UPDATE


Delete the ADJLIST value for a cross-domain resource:

MODIFY procname,RESOURCE ,ID=resource_name ,ADJLIST=list_name

,ACTION=DELETE


Change the delay timer for disconnection of a switched PU:

MODIFY procname,RESOURCE ,ID=resource_name ,DISCNTIM=time_period


148 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

Change the number of search requests for a resource:

MODIFY procname,RESOURCE ,ID=resource_name

,SRCOUNT=number_of_search_requests


Change the value of the search reduction timer for a resource:

MODIFY procname,RESOURCE ,ID=resource_name ,SRTIMER=number_of_seconds


Change the error message display option for an APPL or CDRSC:

MODIFY procname,RESOURCE ,ID=resource_name ,SIRFMSG= OLUSSCP


ALLSSCP
STARTOPT
NONE

Reset the search reduction entry for a resource:

MODIFY procname,RESOURCE ,ID=resource_name ,SRCLEAR=YES


Modify the registration value for a resource:

MODIFY procname,RESOURCE ,ID=resource_name ,REGISTER= CDSERVR


NETSRVR
NO

Modify the ASRCVLM value for an application program:

MODIFY procname,RESOURCE ,ID=resource_name ,ASRCVLM=amount_of_storage


Modify the MODSRCH value for an application program:

MODIFY procname,RESOURCE ,ID=resource_name ,MODSRCH= FIRST


LAST
NEVER

Modify the VTAMTOPO value for a reporting status:

MODIFY procname,RESOURCE ,ID=resource_name ,VTAMTOPO= REPORT


NOREPORT
NOLLINES
NOSWPUS
INCLUDE
IGNORE

Chapter 7. Modify commands 149

Modify commands

F RTP
Request that VTAM search for the best high performance routing (HPR) route,
based on transmission group weight, between the two endpoints of a rapid
transport protocol (RTP) connection:

MODIFY procname,RTP ,ID=rtp_pu_name


F SECURITY
Increase the cryptography specification for an LU:

MODIFY procname,SECURITY ,ID=lu_name ,ENCR= COND

OPT
REQD

(1)
ENCRTYPE=DES



ENCRTYPE=TDES24

Notes:
1 ENCRTYPE can not be downleveled. If the current value is TDES24, MODIFY
SECURITY ENCRTYPE=DES will not be allowed.

Modify which cryptographic key name is used for an LU:

MODIFY procname,SECURITY ,ID=lu_name ,CKEY= ALTERNATE


PRIMARY

Initiate SLU authentication for an LU:

MODIFY procname,SECURITY ,ID=lu_name ,CERTIFY=YES


Increase the message authentication specification for an LU:

MODIFY procname,SECURITY ,ID=lu_name ,MAC= COND

REQD


,MACTYPE= CRC
,MACLNTH= 2
4
DES
,MACLNTH= 4
6
8

150 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

F SESSION
Request that an NCP change the session limit (the maximum number of concurrent
line scheduling sessions allowed) for a nonswitched multipoint line to one or more
attached start/stop or BSC terminals:

MODIFY procname,SESSION=number_of_sessions ,ID=line_name


F SUPP
Change the message suppression level after VTAM has been started:

MODIFY procname,SUPP= NOSUP


INFO
WARN
NORM
SER

F TABLE
Change resource associations or load a new table and associate it with a resource
(other than a CoS table):

MODIFY procname,TABLE ,OPTION=ASSOCIATE ,ID=name ,NEWTAB=new_table_name

,OLDTAB= * ,TYPE= ASLTAB


old_table_name FLDTAB
LOGTAB
MDLTAB
MODETAB
USSTAB

Change resource associations with a CoS table or load a new CoS table and
associate it with a resource:

MODIFY procname,TABLE ,OPTION=ASSOCIATE

,TYPE=COSTAB,NETID=netid,ORIGIN=ncp_name ,NEWTAB=new_table_name


Delete resource associations:

MODIFY procname,TABLE ,OPTION=DELETE

,TYPE= ASLTAB ,ID=name,OLDTAB= *


FLDTAB old_table_name
LOGTAB
MDLTAB
MODETAB
USSTAB
COSTAB,NETID=netid,ORIGIN=ncp_name
FILTER

Chapter 7. Modify commands 151

Modify commands

Load a table to replace an existing table (other than a filter table):

MODIFY procname,TABLE ,OPTION=LOAD ,NEWTAB=new_table_name


,OLDTAB=old_table_name

Load a filter table to replace an existing filter table:

MODIFY procname,TABLE ,OPTION=LOAD ,TYPE=FILTER ,NEWTAB=new_table_name


Load an updated directory definition file:

MODIFY procname,TABLE ,OPTION=LOAD ,TYPE=CMIPDDF


F TGP
Change the transmission group (TG) profile associated with a 2.1 connection:

MODIFY procname,TGP ,TGPNAME=tg_profile_name

,ID=adjacent_link_station_name

,ID=cp_name ,TGN=tg_number

F TNSTAT
Initiate global or TRLE tuning statistics. Also used to alter the CNSL and TIME
tuning statistics values.

,ACTION=ACTIVATE


MODIFY procname,TNSTAT

,ACTION=UPDATE ,CNSL= NO
YES


,TIME=number_of_minutes ,TRLE= trle_name
,

(  trle_name )

F TOPO
Delete a node:

,FUNCTION=DELETE


MODIFY procname,TOPO ,ID=cp_name

152 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,SCOPE=LOCAL



,SCOPE= LOCAL ,TYPE=FORCE
NETWORK

Delete a transmission group:

,FUNCTION=DELETE


MODIFY procname,TOPO ,ORIG=cp_name ,DEST=cp_name

,SCOPE=LOCAL

,TGN=tg_number

,SCOPE= LOCAL ,TYPE=FORCE
NETWORK

Modify the status of a node for route calculation:

MODIFY procname,TOPO ,ID=cp_name ,FUNCTION= NORMAL

QUIESCE

,SCOPE=LOCAL



,SCOPE= LOCAL
NETWORK

Modify the status a transmission group for route calculation:

MODIFY procname,TOPO ,FUNCTION= NORMAL ,ORIG=cp_name ,DEST=cp_name

QUIESCE

,SCOPE=LOCAL

,TGN=tg_number

,SCOPE= LOCAL
NETWORK

Clear unreachable partner information for an Enterprise Extender virtual node or

end node on a network node:

|

MODIFY procname,TOPO ,ID=cp_name ,FUNCTION=CLRUNRCH

|

| ,SCOPE=LOCAL
|


,SCOPE= LOCAL
NETWORK
|

| The cp_name represents either an Enterprise Extender virtual node name or the
name of an end node connected to an Enterprise Extender virtual node.

Clearing unreachable partner information on an end node:

Chapter 7. Modify commands 153

Modify commands

MODIFY procname,TOPO ,ID=cp_name ,FUNCTION=CLRUNRCH

,SCOPE=NETWORK



,SCOPE= NETWORK
LOCAL

The cp_name represents the name of the host end node, which is connected to an
Enterprise Extender virtual node, where the command is issued.

F TRACE
Start or modify a buffer contents trace:

,AMOUNT=PARTIAL


MODIFY procname,TRACE ,TYPE=BUF ,ID=node_name

,AMOUNT= FULL
PARTIAL

,IDTYPE=RESOURCE ,SAVE=NO ,SCOPE=ONLY


,IDTYPE= CP ,SAVE= NO ,SCOPE= ALL
SSCP YES ONLY
RESOURCE

Start or modify a communication network management trace:

MODIFY procname,TRACE ,TYPE=CNM ,ID= PDPIUBUF


SAWBUF

Start or modify a user Exit buffer trace:

MODIFY procname,TRACE ,TYPE=EXIT ,ID=ISTEXCAA

,OPTION= ALL

option
(option)
,

(  ACCTING )
ADJSSCP
ALIAS
ALS
BEGIN
END
GWPATH
INITAUTH
REPL
SECAUTH
VRSEL
XRF

154 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

MODIFY procname,TRACE ,TYPE=EXIT ,ID=ISTEXCCS

,OPTION= ALL

option
(option)
,

(  BEGIN )
CONNSTAT
DYNA_XID
PRED_XID
END

MODIFY procname,TRACE ,TYPE=EXIT ,ID=ISTEXCDM

,OPTION= ALL

option
(option)
,

(  BEGIN )
INITAUTH
BN_SEL
ADS_SEL
CDS_SEL
CRR_SEL
REPL
END

Start or modify a generalized PIU trace:

MODIFY procname,TRACE ,TYPE=GPT ,ID=node_name

,IDTYPE=RESOURCE



,ALSNAME=adjacent_link_station_name ,IDTYPE= CP
SSCP
RESOURCE

,SCOPE=ONLY



,SCOPE= ALL
ONLY

Start or modify an input/output trace:

,IDTYPE=RESOURCE


MODIFY procname,TRACE ,TYPE=IO ,ID=node_name

,IDTYPE= CP
SSCP
RESOURCE

Chapter 7. Modify commands 155

Modify commands

,SAVE=NO ,SCOPE=ONLY



,SAVE= NO ,SCOPE= ALL
YES ONLY

Start or modify an input/output trace for a TRLE with the DATAPATH operand
coded:

MODIFY procname,TRACE ,TYPE=IO ,ID=trle_name

,IDTYPE=RESOURCE



,DEVICE= ALL ,IDTYPE=RESOURCE
hex_device_address

,LENGTH=272 ,SAVE=NO ,SCOPE=ONLY


,LENGTH=number_of_bytes ,SAVE= NO ,SCOPE= ALL
YES ONLY

Start or modify a module trace:

MODIFY procname,TRACE ,TYPE=MODULE ,OPTION= ALL


option
(option)
,

(  COMMAND )
CONNECTION
DEFINITION
INTERFACES
MANAGEMENT
NOEXIT
PURGE
SESSION

Start or modify an NCP line trace:

MODIFY procname,TRACE ,TYPE=LINE ,ID=line_name

,COUNT=ALL



,COUNT= ALL
number_of_bytes

Start or modify a 3710 Network Controller line trace:

MODIFY procname,TRACE ,TYPE=NETCTLR ,ID=pu_name ,LINE=line_name

156 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,PU=3710_pu_name

,FRAMES= ALL
DATA

Start or modify a scanner interface trace:

MODIFY procname,TRACE ,TYPE=SIT ,ID=line_name

,COUNT=ALL



,COUNT= ALL ,TRACEPT=trace_point_id
number_of_bytes

Start or modify an SMS (buffer use) trace:

,ID=VTAMBUF


MODIFY procname,TRACE ,TYPE=SMS


Start or modify a resource state trace:

MODIFY procname,TRACE ,TYPE=STATE

,ID=node_name Operands used with ID


OPTION operand

Operands used with ID:

,IDTYPE=RESOURCE ,SAVE=NO


,IDTYPE= CP ,SAVE= NO
SSCP YES
RESOURCE

,OPTION= ALL
option
(option)
,

(  ADJCP )
APPL
CDRM
CDRSC
GROUP
LINE
LNKST
LU
NCP
PU

Chapter 7. Modify commands 157

Modify commands

OPTION operand:

,OPTION= ALL
option
(option)
,

(  ADJCP )
APPL
CDRM
CDRSC
GROUP
LINE
LNKST
LU
NCP
PU

Start or modify a transmission group trace:

MODIFY procname,TRACE ,TYPE=TG ,ID=line_name


Start or modify a TSO user ID trace:

MODIFY procname,TRACE ,TYPE=TSO ,ID=tso_user_id


Start or modify the VTAM internal trace:

MODIFY procname,TRACE ,TYPE=VTAM

,MODE= EXT EXT operands
INT INT operands

158 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands


,SUBTRACE=ARBP,OPTION= HPR
ALL
(1)
(..,HPR,..)
,SUBTRACE= TGVC ,OPTION= SSCP
TREE ALL
(2)
(..,SSCP,..)
,OPTION= ALL
option
(option)
,

(  API )
APPC
CFS
CIA
CIO
CMIP
CSM
ESC
HPR
LCS
LOCK
MSG
NRM
PIU
PSS
SMS
SSCP
TCP
VCNS
XBUF
XCF

EXT operands:

,BFRNUM=2

,BFRNUM=number

INT operands:

,SIZE=size ,DSPSIZE=dspsize

Notes:
1 If multiple trace options are coded in parentheses, HPR must be one of the
options coded inside the parentheses when SUBTRACE=ARBP is coded.
2 If multiple trace options are coded in parentheses, SSCP must be one of the
options coded inside the parentheses when SUBTRACE=TGVC or
SUBTRACE=TREE is coded.

Chapter 7. Modify commands 159

Modify commands

F USERVAR
Create a new USERVAR:

,OPTION=UPDATE


MODIFY procname,USERVAR ,ID=uservar_name

,TYPE=DYNAMIC ,APPC=NO,UVEXIT=NO

,VALUE=appl_name

,TYPE= DYNAMIC ,APPC= YES,UVEXIT=NO
STATIC NO,UVEXIT= YES
VOLATILE NO

Update an existing USERVAR and change the TYPE:

,OPTION=UPDATE


MODIFY procname,USERVAR ,ID=uservar_name

,APPC=NO,UVEXIT=NO

,TYPE= DYNAMIC

,VALUE=appl_name STATIC ,APPC= YES,UVEXIT=NO
VOLATILE NO,UVEXIT= YES
NO

Update an existing USERVAR, leaving the TYPE unchanged:

,OPTION=UPDATE


MODIFY procname,USERVAR ,ID=uservar_name

,APPC=NO,UVEXIT=NO

,VALUE=appl_name

,APPC= YES,UVEXIT=NO
NO,UVEXIT= YES
NO

Delete a USERVAR:

MODIFY procname,USERVAR ,ID=uservar_name ,OPTION=DELETE


,VALUE=appl_name

F VTAMOPTS
Change certain values that might have been specified on VTAM start options:

MODIFY procname,VTAMOPTS

,ALSREQ= YES ,API64R= NO
NO YES

160 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

(1)



,APPNCOS=class-of-service_name ,ASIRFMSG= ALLSSCP
OLUSSCP
NONE

,AUTHLEN= NO ,AUTORTRY= AUTOCAP ,AUTOTI=time_period
YES CDRM
ALL
NONE

(2) (3)



,BNDYN= NONE ,BNORD= DEFINED
LIMITED PRIORITY
FULL

,BSCMDRS= STATS ,CDRDYN= YES
NOSTATS NO
(,INOPS)
(,NOINOPS)
( STATS ,INOPS )
,NOINOPS
NOSTATS ,INOPS
,NOINOPS

(5)



(4) ,CMPMIPS=compression_ratio
,CDSREFER=number_of_CDSs

,CMPVTAM=compression_level ,CNNRTMSG= SUPPRESS
NOSUPP

(6) (7)



,CONNTYPE= APPN ,CPCP= YES
LEN NO
LEASED
SWITCHED

,CSALIMIT= value ,CSA24= value
(value ) (value )
,F ,F

(8)



,DIALRTRY= YES ,DIRSIZE=number_of_resources
NO

(9)



,DIRTIME=time_period ,DISCNTIM=(time_period1,time_period2)

Chapter 7. Modify commands 161

Modify commands

,DLRORDER= STATNID (10)
CPNAME DSIRFMSG= ALLSSCP
(,FIRST) OLUSSCP
(,ONLY) NONE
(CPNAME ,FIRST)
,ONLY
(STATNID ,FIRST)
,ONLY

,DSPLYDEF=number_of_messages ,DSPLYWLD= FULLWILD
NOWILD
OPERONLY
POAONLY

DUPDEFS= ALL ,DYNDLGMD= logmode_name
NONE NONE
APPL
DEPLU

,DYNMODTB= table_name ,ENCRPREF= NONE
NONE value

(11)



,ENCRYPTN= YES ,ESIRFMSG= ALLSSCP
NO OLUSSCP
CCA NONE
CUSP
24
31

EXPFLTRM=expedited_flow_count ,FSIRFMSG= ALLSSCP
OLUSSCP
NONE

(12)
HOSTNAME= fully_qualified_hostname
NONE

HOTIOTRM=percentage_of_buffer_pool ,HPRNCPBF= YES
NO

HPRPST=(lo_lim,med_lim,hi_lim,netwk_lim)

(13) (14) ALL ALL
,INOPCODE=( , , DUMPENABLE )
ALL ALL DUMPDISABLE
modulename inopcode DUMPDEFAULT

162 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

,INOPDUMP= ON ,IOINT=number_of_seconds
(15)
OFF

,IOMSGLIM=number_of_message_pairs (16)
IPADDR=ip_address

IPINFO= SENDALL (17) IQDIOSTG= MAX
SNDLOCAL IQDCHPID= ANY AVG
DISPONLY NONE MIN
NONE CHPID NNN

,ISTCOSDF= ALL LIMINTCP=number_of_seconds
APPL
DEPLU
INDLU
NONE
,

(  APPL )
DEPLU
INDLU

(18)
,LSIRFMSG= ALLNNS
OLUNNS
NONE

(19)



,MAXLOCAT=max_locate_congestion_threshhold ,MAXLURU=ru_length

,MAXSSCPS=number_of_sscps ,MIHTMOUT=units_of_time

,MSGLEVEL= BASE ,MSGMOD= YES
V4R1 NO
V4R2
V4R3
V4R4
CS390

NNSPREF= NONE ,NQNMODE= NAME
(20) NQNAME
network_node_server

(21)



,NUMTREES=number_of_routing_trees OSIEVENT= ALL
NONE
(22)
PATTERNS

Chapter 7. Modify commands 163

Modify commands

OSIMGMT= YES (23)
NO OSITOPO= ALLCDRSC
ILUCDRSC

,PDTRCBUF=number_of_buffers ,PIUMAXDS=calculation_factor

,PLUALMSG= SUPPRESS ,PPOLOG= YES
NOSUPP NO

PSRETRY=(low_int,med_int,high_int,network_int) ,PSSTRACE= NORB
IRB
SRB
BOTH

(24)



PSWEIGHT= EQUAL QDIOSTG= MAX ,RESUSAGE=usage_limit
LESSTHAN AVG
SAMEROUT MIN
NNN

(25)



,ROUTERES=resistance_value RSIRFMSG= ALLSSCP
OLUSSCP
NONE

,SAVERSCV= (,FREE) ,SAWMXQPK=calculation_factor
(,KEEP)
NO
(NO,FREE)
(NO,KEEP)
YES
(YES,FREE)
(YES,KEEP)
SAWDATA
(SAWDATA,FREE)
(SAWDATA,KEEP)

,SDLCMDRS= YES ,SIRFMSG= ALLSSCP
NO OLUSSCP
STATS NONE
NOSTATS
(,INOPS)
(,NOINOPS)
( STATS ,INOPS )
,NOINOPS
NOSTATS ,INOPS
,NOINOPS

,SLOWVAL= warn_time ,SLUALMSG= SUPPRESS
(warn_time,end_time) NOSUPP

164 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

(26)



,SNAMGMT= YES ,SNVC=subnet_visit_count
NO

(27)



,SORDER= ADJSSCP ,SRCHRED= OFF
APPN ON
APPNFRST
SUBAREA

(28) (29)



,SRCOUNT=number_of_search_requests ,SRTIMER=number_of_seconds

,SSCPORD= DEFINED ,SSDTMOUT=number_of_seconds
PRIORITY

(30)



,SSEARCH= YES ,SUPP= NOSUP
NO INFO
CACHE WARN
NORM
SER

,SWNORDER= CPNAME (31)
STATNID TCPNAME=tcp_job-name
(,FIRST)
(,ONLY)
(CPNAME ,FIRST)
,ONLY
(STATNID ,FIRST)
,ONLY

(32)



UNRCHTIM= unreachable_time UPDDELAY=maximum_time
(,partner_limit)
(unreachable_time,partner_limit)

(33)



VFYRED= YES VFYREDTI= OFF VFYRED= YES
NO 0 NO
reduction_timer

(34) (35)



,VOSDEACT= YES ,VRTG= YES ,VRTGCPCP= YES
NO NO NO

Notes:
1 APPNCOS can be modified only if NODETYPE was specified during VTAM
START processing.
2 BNDYN can be modified only if BN=YES was specified during VTAM START
processing.
3 BNORD can be modified only if BN=YES was specified during VTAM START
processing.
4 CDSREFER can be modified only if NODETYPE=NN and CDSERVR=NO
were specified during VTAM START processing.

Chapter 7. Modify commands 165

Modify commands

5 CMPMIPS is meaningful only if the value for CMPVTAM is greater than 1.

6 CONNTYPE can be modified only if NODETYPE was specified during
VTAM START processing.
7 CPCP can be modified only if NODETYPE was specified during VTAM
START processing.
8 DIRSIZE can be modified only if NODETYPE=NN was specified during
VTAM START processing.
9 DIRTIME can be modified only if NODETYPE=NN was specified during
VTAM START processing.
10 Due to the volume of messages that can be generated, it is not recommended
that this option be enabled during normal operation. Instead, it is
recommended that this option be enabled (using the MODIFY VTAMOPTS
command) on all necessary hosts only when trying to diagnose specific
problems. Once the problem has been diagnosed or documentation has been
collected, this option should be disabled once again (using the MODIFY
VTAMOPTS command).
11 The ENCRYPTN start option cannot be modified if ENCRYPTN=NO was
specified during VTAM START processing.
12 HOSTNAME can be modified only if NODETYPE was specified during
VTAM START processing. Displays of VTAM start options will show the new
value immediately; however, the new value will not be used until all
Enterprise Extender lines, whose GROUP definition statements do not have
HOSTNAME explicitly coded, are inactive. Any subsequent line activation
from the Enterprise Extender XCA major node, whose GROUP definition
statements do not have HOSTNAME explicitly coded, will make use of the
new HOSTNAME start option value. The IPADDR start option, if it is in
effect at the time when the MODIFY VTAMOPTS,HOSTNAME=hostname is
specified, will be reset (that is, set to a value of 0.0.0.0) as part of the
MODIFY processing. The value NONE can be used to clear the setting of the
HOSTNAME start option. HOSTNAME and IPADDR cannot be modified
using one MODIFY VTAMOPTS command. If both start options are specified
on the same MODIFY command, they will both be ignored and message
IST1917I will be generated.
13 When specifying an InOpCode for the second parameter, always specify three
digits by including any leading zeros.
14 If an InOpCode is specified for the second parameter, the first parameter
cannot be ALL.
15 When altering the INOPDUMP VTAM start option, the resulting INOPDUMP
status is propagated to all TRLEs in the TRL major node and becomes the
default status for any subsequently activated TRLEs.
16 IPADDR can be modified only if NODETYPE was specified during VTAM
START processing. The new value will not be used until all lines, defined
with or defaulting to the old value of the IPADDR start option, in the XCA
major node used for Enterprise Extender are inactive. However, displays of
VTAM start options will show the new value immediately. Any subsequent
line activation from the Enterprise Extender XCA major node, whose GROUP
definition statement does not specify the IPADDR operand, will make use of
the new IPADDR start option value. The HOSTNAME start option, if it is in
effect at the time when the MODIFY VTAMOPTS,IPADDR=ip_address is
specified, will be reset (that is, set to a value of NONE) as part of the

166 z/OS V1R7.0 Comm Svr: Quick Reference

 Modify commands

MODIFY processing. The value of 0.0.0.0 can be used to clear the setting of
the IPADDR start option. HOSTNAME and IPADDR cannot be modified
using one MODIFY VTAMOPTS command. If both start options are specified
on the same MODIFY command, they will each be ignored and message
IST1917I will be generated.
17 The IQDCHPID option controls which IQD CHPID (and related subchannel
devices) VTAM selects to dynamically build the iQDIO (IUTIQDIO) MPC
group. The IUTIQDIO MPC group is used for TCP/IP dynamic XCF
communications within this zSeries system. Although this option can be
modified (and the modification will immediately be displayed) while the
IUTIQDIO MPC group is currently active, any modifications will have the
following effects:
v modified from ANY (or CHPID) to NONE — no effect on current usage
but blocks subsequent activations
v modified from NONE to ANY (or CHPID) — no effect on current usage
but allows subsequent activations
v modified from CHPID_X to CHPID_Y — no effect on current usage

Note: VTAM only uses the CHPID value when building the IUTIQDIO
MPC group. To change CHPIDs for an active MPC group, the
following must be done:
1. All TCP/IP iQDIO devices must be stopped.
2. Make any necessary HCD/IOCDS changes.
3. Verify that new subchannel devices are varied online.
4. Verify that the MPC group has deactivated (with no usage, it
times out after approximately two minutes).
5. Modify IQDCHPID=CHPID (to new CHPID).
6. Restart the TCP/IP iQDIO device or devices.

Note: In order to use iQDIO communications, the processor must have the
necessary hardware support. If the processor does not support iQDIO
communications, then modifications to this start option will not be
accepted and the IQDCHPID option will not be displayed (displayed
as ***NA***).
18 Due to the volume of messages that can be generated, it is not recommended
that this option be enabled during normal operation. Instead, it is
recommended that this option be enabled (using the MODIFY VTAMOPTS
command) on all necessary hosts only when trying to diagnose specific
problems. Once the problem has been diagnosed or documentation has been
collected, this option should be disabled once again (using the MODIFY
VTAMOPTS command).
19 MAXLOCAT can be modified only if NODETYPE was specified during
VTAM START processing.
20 NNSPREF can be specified only if NODETYPE=EN is specified during VTAM
START processing.
21 NUMTREES can be modified only if NODETYPE=NN was specified during
VTAM START processing.
22 OSIEVENT=PATTERNS is not valid when OSIMGMT=YES.
23 OSITOPO=ALLCDRSC is not valid when OSIMGMT=YES.

Chapter 7. Modify commands 167

Modify commands

24 RESUSAGE can be modified only if NODETYPE=NN was specified during

VTAM START processing.
25 ROUTERES can be modified only if NODETYPE=NN was specified during
VTAM START processing.
26 SNVC can be modified only if BN=YES was specified during VTAM START
processing.
27 SORDER can be modified only if VTAM has been started as an interchange
node or a migration data host.
28 SRCOUNT is meaningful only when SRCHRED=ON.
29 SRTIMER is meaningful only when SRCHRED=ON.
30 SSEARCH can be modified only if NODETYPE=NN was specified during
VTAM START processing.
31 TCPNAME can be modified only if NODETYPE was specified during VTAM
START processing. The new value will not be used until all lines in the XCA
major node used for Enterprise Extender are inactive. However, displays of
VTAM start options will show the new value immediately. Any subsequent
line activation from the Enterprise Extender XCA major node will make use
of the new TCPNAME value.
32 UNRCHTIM is meaningful only if the NODETYPE start option is also used.
33 VFYREDTI can be modified only if NODETYPE=NN was specified during
VTAM START processing.
34 VRTG can be modified only if NODETYPE and HOSTSA are specified.
35 VRTGCPCP can be modified only if NODETYPE and HOSTSA are specified.

168 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 8. Starting VTAM
START


START procname,,,( Options )


For the syntax of the start options that you can specify on this command, see
Chapter 10, “Start options,” on page 183.

© Copyright IBM Corp. 1984, 2005 169

Starting VTAM

170 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 9. Vary commands
V ACQ
Acquire an NCP, and optionally its subordinate resources, from another host:

VARY NET,ACQ ,ID=ncp_name

,OWNER=host_name ,PUSUB


,ACT Operands used with ACT

Acquire “inactive” NCP, and optionally its subordinate resources, without

activating them:

VARY NET,ACQ ,ID=ncp_name


,PUSUB

Acquire “inactive” NCP, and optionally its subordinate resources, and activate
them:

VARY NET,ACQ ,ID=ncp_name ,ACT Operands used with ACT

,PUSUB


,LOADMOD=load_module_name

Acquire nonswitched PU and its LUs:

VARY NET,ACQ ,ID=pu_name


,ACT Operands used with ACT

Operands used with ACT:

,SCOPE=COMP

,LOGON=appl_name ,SCOPE= ALL

LOGMODE operand COMP
ONLY
U

LOGMODE operand:

,LOGMODE=logon_mode_name

© Copyright IBM Corp. 1984, 2005 171

Vary commands

V ACT
Activate an NCP major node:

VARY NET,ACT ,ID=ncp_name

,DUMPSTA=
link_station_name

,LOGON=appl_name
,LOGMODE=logon_mode_name

,LOAD=U,LOADFROM=HOST,DUMPLOAD=NO,SAVEMOD=NO



,LOAD= NO
U NCP load operands
YES

,NEWPATH=
dpu_name
,
(1)
(  dpu_name )

,SCOPE=COMP



,RNAME= ,SCOPE= ALL
link_station_name COMP
, ONLY
(2) U
(  link_station_name )

,UPDATE=IMPLICIT



,U=channel_unit_address ,UPDATE= IMPLICIT
ADD
ALL

NCP LOAD operands:

,LOADSTA= ,LOADMOD=load_module_name
link_station_name

,LOADFROM=HOST,DUMPLOAD=NO,SAVEMOD=NO


,LOADFROM= EXTERNAL EXTERNAL operands
HOST HOST operands

EXTERNAL operands:

172 z/OS V1R7.0 Comm Svr: Quick Reference

 Vary commands

,DUMPLOAD=NO ,SAVEMOD=NO

,DUMPLOAD= NO
YES

HOST operands:

,DUMPLOAD=NO,SAVEMOD=NO

,SAVEMOD=NO
,DUMPLOAD= NO
,SAVEMOD= NO
YES
YES,SAVEMOD=YES

Notes:
1 You can specify up to three dynamic path update member names on the
NEWPATH operand.
2 You can specify up to 13 link station names on the RNAME operand.

Activate a switched major node:

,DWACT=NO


VARY NET,ACT ,ID=major_node_name

,DWACT= NO
YES

,SCOPE=COMP



,LOGON=appl_name ,SCOPE= ALL
,LOGMODE=logon_mode_name COMP
ONLY
U

,UPDATE=IMPLICIT



,UPDATE= IMPLICIT
ADD
ALL

Activate the dynamic XCF local SNA major node:

VARY NET,ACT ,ID=ISTLSXCF


Activate a switched line:

VARY NET,ACT ,ID=line_name


,ANS= OFF
ON

Activate a type 2.1 PU (adjacent link station) or a nonswitched line under an NCP:

Chapter 9. Vary commands 173

Vary commands

VARY NET,ACT ,ID= pu_name

line_name ,CPCP= YES
NO

(1)



,HPR= NO ,LOGON=appl_name
YES ,LOGMODE=logon_mode_name

,SCOPE=COMP (2)



,SCOPE= ALL ,U=channel_unit_address
COMP
ONLY
U

Notes:
1 The HPR operand is valid for HPR-capable resources only.
2 The U operand is valid for a local SNA PU only.

Activate a dynamic XCF local SNA PU:

VARY NET,ACT ,ID=name


,IDTYPE=XCFCP

Activate a control point (CDRSC minor node or application program minor node):

,IDTYPE=RESOURCE ,SCOPE=COMP


VARY NET,ACT ,ID=name

,IDTYPE= CP ,SCOPE= ALL
RESOURCE COMP
ONLY
U

Activate an SSCP (CDRM minor node):

(1) ,IDTYPE=RESOURCE


VARY NET,ACT ,ID=name

,HPR= NO ,IDTYPE= SSCP
YES RESOURCE

,SCOPE=COMP (1)



,SCOPE= ALL ,VRTGCPCP= YES
COMP NO
ONLY
U

Notes:
1 HPR and VRTGCPCP are only valid if VRTG=YES is coded for the CDRM,
and the CDRM is in an inactive state.

Warm start a major node:

174 z/OS V1R7.0 Comm Svr: Quick Reference

 Vary commands

VARY NET,ACT ,ID=major_node_name ,WARM


Activate a definition file (a major node with no subordinate resources):

VARY NET,ACT ,ID=major_node_name


Check the syntax of a definition file (major node):

VARY NET,ACT ,ID=major_node_name ,SCOPE=SYNTAX


,LOADMOD=load_module_name

Dynamically reconfigure resources in a major node:

Note: For an NCP major node, follow the syntax diagram for “Activating an NCP
major node” and specify the UPDATE operand.

,SCOPE=COMP


VARY NET,ACT ,ID=major_node_name

,SCOPE= ALL
COMP
ONLY
U

,UPDATE=IMPLICIT



,UPDATE= IMPLICIT
ADD
ALL

Dynamically reconfigure TRLEs in a TRL major node:

,UPDATE=ADD


VARY NET,ACT ,ID=trl_major_node_name

(1)
,UPDATE= IMPLICIT
ADD
ALL

Notes:
1 Specifying UPDATE=IMPLICIT is the same as UPDATE=ADD.

Activate a group under an Enterprise Extender XCA major node:

,SCOPE=COMP


VARY NET,ACT ,ID=group_name

,SCOPE=ALL
,SCOPE=COMP
,SCOPE=ONLY
,SCOPE=U

Chapter 9. Vary commands 175

 Vary commands

Activate other resources:

,DWACT=NO


VARY NET,ACT ,ID=name

,DWACT= NO
YES

,SCOPE=COMP



,LOGON=appl_name ,SCOPE= ALL
,LOGMODE=logon_mode_name COMP
ONLY
U

(1)



,U=channel_unit_address

Notes:
1 The U operand is valid for a local SNA PU or a channel link.

| Activate a model CDRSC and, optionally, all the clone CDRSCs created from it:

| ,SCOPE=COMP


VARY NET,ACT ,ID=model_cdrsc_name

,SCOPE= ALL
COMP
ONLY
U
|
|
V ANS
Enable active switched SDLC lines with dial-in capability to allow or disallow an
incoming call from a physical unit defined in a switched major node:

VARY NET ,ANS= OFF ,ID=line_name


ON ,ACT

| V AUTOLOG
| Initiate automatic logon processing for resources that are defined with controlling
| applications:

|

VARY NET,AUTOLOG ,ID=*


,ID=controlling_appl
|
|
| V CFS
| Connect or disconnect from a VTAM coupling facility structure:

|

VARY NET ,CFS ,ACTION= CONNECT ,STRNAME= ALL


DISCONNECT structure_name
|

176 z/OS V1R7.0 Comm Svr: Quick Reference

 Vary commands

|
V DIAL
Establish a switched subarea connection, a switched connection to a type 1,2, or 2.1
device (adjacent link station), or a CPSVRMGR session between a dependent LU
requester (DLUR) and a dependent LU server (DLUS):

VARY NET,DIAL ,ID=resource_name


,CPCP= YES
NO

V DRDS
Dynamically reconfigure an NCP or a nonswitched peripheral node:

VARY NET,DRDS ,ID=dr_file_name


V HANGUP
Take down a switched subarea connection or a switched connection to a type 1,2,
or 2.1 device.

VARY NET,HANGUP ,ID=link_station_name


V INACT
Deactivate an NCP major node:

,CDLINK=ACT ,RMPO=NO


VARY NET,INACT ,ID=ncp_name

,CDLINK= ACT ,RMPO= NO
INACT YES


,TYPE= FORCE
IMMED
REACT
UNCOND

Deactivate an NCP line:

VARY NET,INACT ,ID=line_name


,TYPE= FORCE
GIVEBACK
IMMED
UNCOND

Deactivate a CDRM major node:

Chapter 9. Vary commands 177

Vary commands

VARY NET,INACT ,ID=node_name


,SAVESESS ,TYPE= FORCE
IMMED
UNCOND

Deactivate a CDRM minor node:

VARY NET,INACT ,ID=node_name

,IDTYPE=SSCP ,SAVESESS


,TYPE= FORCE
IMMED
UNCOND

Deactivate a CDRSC minor node:

,DELETE=NO


VARY NET,INACT ,ID=node_name

,DELETE= NO ,IDTYPE=CP
YES


,TYPE= FORCE
IMMED
UNCOND

Deactivate the dynamic XCF local SNA major node:

VARY NET,INACT ,ID=ISTLSXCF


,TYPE= FORCE
IMMED
UNCOND

Deactivate a dynamic XCF local SNA PU:

VARY NET,INACT ,ID=name


,IDTYPE=XCFCP ,TYPE= FORCE
IMMED
UNCOND

Deactivate a dynamic switched PU:

VARY NET,INACT ,ID=pu_name


,TYPE= FORCE
IMMED
UNCOND

Deactivate a dependent LU requester (DLUR):

178 z/OS V1R7.0 Comm Svr: Quick Reference

 Vary commands

(1) ,FINAL=NO


VARY NET,INACT ,ID=dlur_name

,FINAL= NO
YES


,TYPE= FORCE
GIVEBACK
IMMED
UNCOND

Notes:
1 Depending on the value of the VARYWLD start option, wildcard values can
be used for this operand.

Deactivate a PU supported by a DLUR:

VARY NET,INACT ,ID=pu_name


,TYPE= FORCE
GIVEBACK
IMMED
REACT
UNCOND

Deactivate other PUs:

VARY NET,INACT ,ID=pu_name FINAL operands


,ID=rtp_pu_name ,TYPE=FORCE

FINAL operands:

,FINAL=NO

,FINAL= NO
,TYPE= FORCE
IMMED
REACT
UNCOND
YES
,TYPE= FORCE
IMMED
UNCOND

Deactivate a group under an XCA major node for EE:

VARY NET,INACT ,ID=group_name


,TYPE= FORCE
IMMED
UNCOND

Deactivate a model application and all the APPLs created from it:

Chapter 9. Vary commands 179

 Vary commands

VARY NET,INACT ,ID=model_appl_name

,TYPE= FORCE
IMMED
REACT
UNCOND


,SCOPE= ALL

Deactivate other resources:

VARY NET,INACT ,ID=name


,TYPE= FORCE
IMMED
REACT
UNCOND

| Deactivate a model CDRSC and, optionally, all the clone CDRSCs created from it:

|

VARY NET,INACT ,ID=model_cdrsc_name

| ,TYPE= FORCE
IMMED
UNCOND

| ,DELETE=NO
|


,SCOPE=ALL ,DELETE= NO
YES
|

| Deactivate a clone CDRSC:

|

VARY NET,INACT ,ID=clone_cdrsc_name

| ,TYPE= FORCE
IMMED
UNCOND

| ,DELETE=value_of_DELETE_operand_on_model_CDRSC
|


,DELETE= NO
YES

|
V INOP
Terminate a manual dial operation if the VTAM operator is unable to complete the
call:

,END=NO


VARY NET,INOP ,ID=line_name

,END= NO
YES

180 z/OS V1R7.0 Comm Svr: Quick Reference

 Vary commands

V LOGON
Create or change an automatic logon specification:

VARY NET ,LOGON=appl_name ,ID=slu_name

,LOGMODE=logon_mode_name


,ACT

V NOLOGON
Delete an existing automatic logon specification:

VARY NET ,NOLOGON= * ,ID=slu_name


cdrsc_name
plu_name
uservar_name

V PATH
Modify the availability of a dial-out path to a specific switched physical unit or a
group of dial-out paths within a switched major node:

VARY NET,PATH= NOUSE ,GID=group_id ,ID=switched_major_node_name


USE ,PID=path_id ,ID=switched_pu_name

V REL
Release a previously acquired NCP:

,CDLINK=ACT


VARY NET,REL ,ID=ncp_name

,OWNER=host_name ,CDLINK= ACT
INACT


,TYPE= GIVEBACK
IMMED

Release a PU:

,FINAL=NO


VARY NET,REL ,ID=pu_name

,OWNER=host_name ,FINAL= NO
YES


,TYPE=IMMED

Chapter 9. Vary commands 181

Vary commands

V TERM
VARY TERM command using name or name pair:

,TYPE=UNCOND


VARY NET,TERM ,LU1=lu_name

,LU2=lu_name ,TYPE= COND
,LU2=lu_name FORCE
,LU1=lu_name UNCOND
,PLU=plu_name
,SLU=slu_name
,SLU=slu_name
,PLU=plu_name

,SCOPE=ACT ,NOTIFY=YES



,SCOPE= ACT ,NOTIFY= NO
ALL YES
Q

VARY TERM command using session ID:

,TYPE=UNCOND


VARY NET,TERM ,SID=session_id

,TYPE= COND
FORCE
UNCOND

,SCOPE=ACT ,NOTIFY=YES



,SCOPE= ACT ,NOTIFY= NO
ALL YES
Q
APPN

182 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 10. Start options
Start options are listed in this section alphabetically; however, you can code them
in any order.

Precede the option list with three commas and enclose the group of options in
parentheses.

Start options that are entered on the START command must be separated by
commas. Do not leave any blanks between options.

For more information on the START command, refer to z/OS Communications Server:
SNA Operation.

Options:

AFFDELAY=600
NETID=network_id SSCPID=sscp_id SSCPNAME=name

AFFDELAY=number_of_seconds

(1)
ALSREQ=NO API64R=YES APPNCOS=NONE



ALSREQ= YES API64R=NO APPNCOS=class-of-service_name
NO

ASIRFMSG=OLUSSCP ASYDE=TERM AUTHLEN=YES

ASIRFMSG= ALLSSCP ASYDE= KEEP AUTHLEN= NO
OLUSSCP TERM YES
NONE

(2)
AUTORTRY=AUTOCAP AUTOTI=0 BN=NO



AUTORTRY= AUTOCAP AUTOTI=time_period BN= NO
CDRM YES
ALL
NONE

(3) (4)
BNDYN=LIMITED BNORD=PRIORITY



BNDYN= LIMITED BNORD= PRIORITY
NONE DEFINED
FULL

BSCMDRS=(STATS,INOPS) BSCTMOUT=286



BSCMDRS= STATS BSCTMOUT=units_of_time
NOSTATS
(,INOPS)
(,NOINOPS)
( STATS ,INOPS )
,NOINOPS
NOSTATS ,INOPS
,NOINOPS

© Copyright IBM Corp. 1984, 2005 183

Start options

CACHETI=8



poolname= () CACHETI=number_of_minutes
Buffer pool values

(5)
CDRDYN=YES CDRSCTI=8M CDSERVR=NO



CDRDYN= NO CDRSCTI=timeout_value CDSERVR= YES
YES NO

(6)
CDSREFER=1 CINDXSIZ=8176



CDSREFER=number_of_CDSs CINDXSIZ=table_size

(7)
CMPMIPS=100 CMPVTAM=0



CMPMIPS=compression_ratio CMPVTAM=compression_level

CNMTAB=ISTMGC00 CNNRTMSG=SUPPRESS COLD

CNMTAB=cnm_table_name CNNRTMSG= SUPPRESS WARM
NOSUPP

(8)
CONFIG=00 CONNTYPE=APPN CPCDRSC=NO



CONFIG= file_id CONNTYPE= APPN CPCDRSC= YES
file_name LEN NO

(9)
CPCP=LEASED CSALIMIT=0 CSA24=0



CPCP= YES CSALIMIT= value CSA24=value
NO (value)
LEASED ,F
SWITCHED

(10)
DATEFORM=MDY DIALRTRY=YES DIRSIZE=0



DATEFORM= MDY DIALRTRY= YES DIRSIZE=number_of_resources
DMY NO
YMD

(11)
DIRTIME=8D DISCNTIM=(15,0)



DIRTIME=time_period DISCNTIM=(time_period1,time_period2)

DLRORDER=(STATNID,FIRST)



,DLRORDER= STATNID
CPNAME
(,FIRST)
(,ONLY)
(CPNAME ,FIRST)
,ONLY
(STATNID ,FIRST)
,ONLY

184 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

(12)
DLRTCB=32 DLURSAW=YES



DLRTCB=number_of_task_control_blocks DLURSAW= YES
NO

(14)
DSIRFMSG=NONE DSPLYDEF=100



(13) DSPLYDEF=number_of_messages
DSIRFMSG= ALLSSCP
OLUSSCP
NONE

DSPLYMAX=65535 DSPLYWLD=FULLWILD



DSPLYMAX=number_of_messages DSPLYWLD= FULLWILD
NOWILD
OPERONLY
POAONLY

(15)
DUPDEFS=ALL DYNADJCP=YES DYNASSCP=YES



DUPDEFS= ALL DYNADJCP= YES DYNASSCP= YES
NONE NO NO
APPL
DEPLU

DYNDLGMD=NONE



DYNDLGMD= logmode_name (16)
NONE DYNHPPFX= prefix

DYNLU=NO DYNMODTB=NONE DYNPUPFX=CN

DYNLU= YES DYNMODTB= table_name DYNPUPFX= prefix(¹⁴)
NO NONE

DYNVNPFX=CNV ENCRPREF=NONE



DYNVNPFX= prefix(¹⁴) ENCRPREF= NONE
value

ENCRYPTN=YES ENHADDR=NO ESIRFMSG=ALLSSCP

ENCRYPTN= YES ENHADDR= NO ESIRFMSG= ALLSSCP
NO YES OLUSSCP
(17) NONE
CCA
CUSP
24
31

EXPFLTRM=0 FLDTAB=ISTMSFLD



EXPFLTRM=expedited_flow_count FLDTAB= table_name
NONE

Chapter 10. Start options 185

Start options

FSIRFMSG=OLUSSCP GWSSCP=YES HNTSIZE=4080

FSIRFMSG= ALLSSCP GWSSCP= YES HNTSIZE=4080
OLUSSCP NO
NONE

HOSTPU=ISTPUS



(18) HOSTPU=host_subarea_pu_name
HOSTNAME=fully_qualified_hostname

HOSTSA=1 HOTIOTRM=0



(19) HOTIOTRM=percentage_of_buffer_pool
HOSTSA=subarea_number

(20)
HPR=RTP HPRNCPBF=NO



HPR= ANR HPRNCPBF= YES
RTP NO
NONE
(RTP,ANR)
(RTP,NONE)
(ANR,NONE)

HPRPST=(8M,4M,2M,1M)



HPRPST=(lo_lim,med_lim,hi_lim,netwk_lim)

(21)
HSRTSIZE=9973 INITDB=ALL



HSRTSIZE=number_of_queue_pointers INITDB= ALL
DIR
TOPO
NONE

(22) (23)
INOPCODE=(ALL,ALL,DUMPDEFAULT)



,

ALL ALL
 INOPCODE=( ALL , ALL , DUMPENABLE
modulename inopcode DUMPDISABLE
DUMPDEFAULT

INOPDUMP=OFF IOINT=180



(24) (25) IOINT=number_of_seconds
INOPDUMP= ON
OFF

IOMSGLIM=100 IOPURGE=0



IOMSGLIM=number_of_message_pairs IOPURGE=timeout_value

186 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

IPINFO=SENDALL



(26) IPINFO= SENDALL
IPADDR= ip_address SNDLOCAL
DISPONLY
NONE

(28)
IQDCHPID=ANY IQDIOSTG=MAX IRNSTRGE=0



(27) IQDIOSTG= MAX IRNSTRGE=size
IQDCHPID= ANY AVG
NONE MIN
CHPID NNN

ISTCOSDF=INDLU



ISTCOSDF= ALL LIMINTCP=number_of_seconds
APPL
DEPLU
INDLU
NONE
,

(  APPL )
DEPLU
INDLU

(29)
LIST=00



LIST=start_option_list_id (30)
LISTBKUP= start_option_list_id
DEFAULTS
PROMPT

LSIRFMSG=NONE



(31) MAINTLVL=maintenance_level
,LSIRFMSG= ALLNNS
OLUNNS
NONE

(32)
MAXLOCAT=5000 MAXLURU=6144



MAXLOCAT=max_locate_congestion_threshhold MAXLURU=ru_length

MAXSSCPS=10 MAXSUBA=15



MAXSSCPS=number_of_SSCPs MAXSUBA=maximum_subarea_number

MIHTMOUT=1800 MSGLEVEL=BASE MSGMOD=NO

MIHTMOUT=units_of_time MSGLEVEL= BASE MSGMOD= NO
V4R1 YES
V4R2
V4R3
V4R4
CS390

Chapter 10. Start options 187

Start options

MXSAWBUF=10000 MXSSCPRU=4096 MXSUBNUM=511

MXSAWBUF=number_of_buffers MXSSCPRU=ru_length MXSUBNUM= 255
511
1023
2047
4095
8191
16383
32767
65535

(33)
NCPBUFSZ=512 NMVTLOG=NPDA NNSPREF=NONE



NCPBUFSZ= 512 NMVTLOG= ALWAYS NNSPREF=network_node_server
1024 NEVER
2048 NPDA

NODELST=name (34)
NODETYPE= EN
NN

Notes:
1 APPNCOS is meaningful only if the NODETYPE start option is also used.
2 BN is meaningful only if the NODETYPE=NN start option is also used.
3 BNDYN is meaningful only if the BN=YES start option is also used.
4 BNORD is meaningful only if the BN=YES start option is also used.
5 CDSERVR is meaningful only if the NODETYPE=NN start option is also
used.
6 CDSREFER is meaningful only if the NODETYPE=NN and CDSERVR=NO
start options are also used.
7 The CMPMIPS start option is meaningful only if the value for CMPVTAM is
greater than 1.
8 CONNTYPE is meaningful only if the NODETYPE start option is also used.
9 CPCP is meaningful only if the NODETYPE start option is also used.
10 DIRSIZE is meaningful only if the NODETYPE=NN start option is also used.
11 DIRTIME is meaningful only if the NODETYPE=NN start option is also used.
12 DLURSAW is meaningful only if the NODETYPE=NN start option is also
used.
13 Due to the volume of messages that can be generated, it is not recommended
that this option be enabled during normal operation. Instead, it is
recommended that this option be enabled (using the MODIFY VTAMOPTS
command) on all necessary hosts only when trying to diagnose specific
problems. Once the problem has been diagnosed or documentation has been
collected, this option should be disabled once again (using the MODIFY
VTAMOPTS command).
14 If the DSPLYMAX start option value is less than 100, that value is the default
for DSPLYDEF.

188 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

15 DYNADJCP is meaningful only if the NODETYPE start option is also used.

16 Two character prefix.
17 ENCRYPTN=CCA needs to be coded when Triple Des Encryption is desired.
18 HOSTNAME is meaningful only if the NODETYPE start option is also used.
If neither HOSTNAME nor IPADDR is specified on any of the GROUP
definition statements within the Enterprise Extender XCA major node, then
either the HOSTNAME, TCPNAME, or IPADDR start options must be
specified in order to activate an Enterprise Extender link. The HOSTNAME
start option specifies the default hostname to be used for name-to-address
resolution as part of activating an Enterprise Extender connection, and must
resolve at this node to a static VIPA address associated with a TCP/IP stack
at this node. If IPADDR is specified along with HOSTNAME on the START
command, the IPADDR value is ignored.
19 HOSTSA specifies the subarea number of this VTAM. If HOSTSA is not
coded, then a default subarea number of 1 is used.
20 HPR is meaningful only if NODETYPE is also used.
21 INITDB is meaningful only if the NODETYPE=NN start option is also used.
22 When specifying an InOpCode for the second parameter, always specify three
digits by including any leading zeros.
23 If an InOpCode is specified for the second parameter, the first parameter
cannot be ALL.
24 INOPDUMP status is propagated to resources that are defined within a
transport resource list entry when the entry is activated and the TRLE
InOpDump status has not been explicitly set.
25 The INOPCODE start option provides more granular control of the
INOPDUMP function. Refer to the INOPCODE in this section and the
DISPLAY INOPCODE command in z/OS Communications Server: SNA
Operation for additional details.
26 IPADDR is meaningful only if the NODETYPE start option is also used. If
neither IPADDR nor HOSTNAME is specified on any of the GROUP
definition statements within the Enterprise Extender XCA major node, then
either the HOSTNAME, TCPNAME, or IPADDR start option must be
specified in order to activate an Enterprise Extender link. The IPADDR start
option specifies the default IPv4 static VIPA address to be used when
activating an Enterprise Extender connection. If HOSTNAME is specified
along with IPADDR on the START command, the IPADDR value is ignored.
27 The IQDCHPID option controls which IQD CHPID (and related subchannel
devices) VTAM selects to dynamically build the iQDIO (IUTIQDIO) MPC
group. The IUTIQDIO MPC group is used for TCP/IP dynamic XCF
communications within this zSeries system. Although this option can be
modified (and the modification will immediately be displayed) while the
IUTIQDIO MPC group is currently active, any modifications will have the
following effects:
v Modified from ANY (or CHPID) to NONE — no effect on current usage
but blocks subsequent activations
v Modified from NONE to ANY (or CHPID) — no effect on current usage
but allows subsequent activations
v Modified from CHPID_X to CHPID_Y — no effect on current usage

Chapter 10. Start options 189

Start options

Note: VTAM only uses the CHPID value when building the IUTIQDIO
MPC group. To change CHPIDs for an active MPC group, the
following must be done:
1. All TCP/IP iQDIO (HiperSockets™) devices must be stopped.
2. Make any necessary HCD/IOCDS changes.
3. Verify that new subchannel devices are varied online.
4. Verify that the MPC group has deactivated (with no usage, it
times out after approximately two minutes).
5. Modify IQDCHPID=CHPID (to new CHPID).
6. Restart the TCP/IP iQDIO device or devices.

Note: In order to use iQDIO communications, the processor must have the
necessary hardware support. If the processor does not support iQDIO
communications, then modifications to this start option will not be
accepted and the IQDCHPID option will not be displayed (displayed
as ***NA***).
28 This option only affects iQDIO devices that use a MFS of 64k. The smaller
frame sizes will always use 126 SBALs.
29 LIST can be entered by a VTAM operator only. If LIST is coded in an
ATCSTRxx file, it is considered to be an error and is ignored.
30 LISTBKUP can only be coded in a start option file. If you enter it on the
START command or at an operator prompt, VTAM will ignore it.
31 Due to the volume of messages that can be generated, it is not recommended
that this option be enabled during normal operation. Instead, it is
recommended that this option be enabled (using the MODIFY VTAMOPTS
command) on all necessary hosts only when trying to diagnose specific
problems. Once the problem has been diagnosed or documentation has been
collected, this option should be disabled once again (using the MODIFY
VTAMOPTS command).
32 MAXLOCAT is meaningful only if NODETYPE is specified.
33 NNSPREF can be specified only if NODETYPE=EN is specified during VTAM
START processing.
34 NODETYPE enables APPN function. The combination of HOSTSA,
NODETYPE, and SACONNS determines the configuration (subarea node,
interchange node, migration data host, network node, or end node).

NQNMODE=NAME


NQNMODE= NAME ,
NQNAME
NSRTSIZE=(  netid,size )

NUMTREES=100 OSIEVENT=PATTERNS



(1) OSIEVENT= ALL
NUMTREES=number_of_routing_trees NONE
PATTERNS

190 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

OSIMGMT=NO OSITOPO=(ILUCDRSC)



OSIMGMT= YES ALLCDRSC
NO OSITOPO=
ILUCDRSC

OSRTSIZE=43 PDTRCBUF=2



OSRTSIZE=number_of_queue_pointers PDTRCBUF=number_of_buffers

PIUMAXDS=200 PLUALMSG=NOSUPP



PIUMAXDS=calculation_factor PLUALMSG= SUPPRESS
NOSUPP

(2)
PPOLOG=NO PROMPT



PPOLOG= NO NOPROMPT
YES

PSRETRY=(0,0,0,0) PSSTRACE=NORB



PSRETRY=(lo_int,med_int,hi_int,netwk_int) PSSTRACE= NORB
IRB
SRB
BOTH

(3) (4)
QDIOSTG=MAX RESUSAGE=100



QDIOSTG= MAX RESUSAGE=usage_limit
AVG
MIN
NNN

(5)
ROUTERES=128 RSIRFMSG=ALLSSCP



ROUTERES=resistance_value RSIRFMSG= ALLSSCP
OLUSSCP
NONE

Chapter 10. Start options 191

Start options

(6)
SAVERSCV=(NO,KEEP) SAWMAXDS=100



SAVERSCV= (,FREE) SAWMAXDS=calculation_factor
(,KEEP)
NO
(NO,FREE)
(NO,KEEP)
YES
(YES,FREE)
(YES,KEEP)
SAWDATA
(SAWDATA,FREE)
(SAWDATA,KEEP)

SAWMXQPK=0



SAWMXQPK=calculation_factor

SDLCMDRS=(STATS,INOPS) (7)
SDLCMDRS=YES SECLVLCP=ADAPT



SDLCMDRS= YES SECLVLCP= LEVEL1
NO LEVEL2
STATS ADAPT
NOSTATS
(,INOPS)
(,NOINOPS)
( STATS ,INOPS )
,NOINOPS
NOSTATS ,INOPS
,NOINOPS

SIRFMSG=ALLSSCP SLOWVAL=(0,0)



SIRFMSG= ALLSSCP SLOWVAL= warn_time
OLUSSCP (warn_time,end_time)
NONE

SLUALMSG=NOSUPP SMEAUTH=DISCARD ,SNAMGMT=NO

SLUALMSG= SUPPRESS SMEAUTH= DISCARD ,SNAMGMT= YES
NOSUPP EXIT NO
KEEP

(8)
SNAPREQ=1000 SNVC=3



SNAPREQ=number_of_requests SNVC=subnet_visit_count

192 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

(9)
SONLIM=(60,30) SORDER=APPN



SONLIM= (percent_1,percent_2) SORDER= ADJSSCP
(percent_1) APPN
(,percent_2) APPNFRST
SUBAREA

(10)
SRCHRED=OFF SRCOUNT=10



SRCHRED= OFF SRCOUNT=number_of_search_requests
ON

(11) (12)
SRTIMER=30 SSCPDYN=YES



SRTIMER=number_of_seconds SSCPDYN= NO
YES

SSCPORD=PRIORITY SSDTMOUT=30



SSCPORD= DEFINED SSDTMOUT=number_of_seconds
PRIORITY

(13)
SSEARCH=YES STRGR=ISTGENERIC



SSEARCH= YES STRGR= ISTGENERIC
NO NONE
CACHE structure_name
APPNFRST

STRMNPS=ISTMNPS SUPP=NOSUP



STRMNPS= ISTMNPS SUPP= NOSUP
NONE INFO
structure_name WARN
NORM
SER

SWNORDER=(CPNAME,FIRST)



,SWNORDER= CPNAME
STATNID
(,FIRST)
(,ONLY)
(CPNAME ,FIRST)
,ONLY
(STATNID ,FIRST)
,ONLY

Chapter 10. Start options 193

Start options

(14)
TCPNAME= tcp_job-name

NOTNSTAT



,NOCNSL ,TIME=60
TNSTAT
,CNSL ,TIME=minutes

(15)
NOTRACE,TYPE=BUF



(16)
TRACE,TYPE=BUF BUF trace operands

(15)
NOTRACE,TYPE=IO



(16)
TRACE,TYPE=IO IO trace operands

(15)
NOTRACE,TYPE=LINE



(16)
TRACE,TYPE=LINE LINE trace operands

(15)
NOTRACE,TYPE=MODULE



(16)
TRACE,TYPE=MODULE, MODULE operands

(15)
NOTRACE,TYPE=SIT



(16)
TRACE,TYPE=SIT SIT trace operands

(15)
NOTRACE,TYPE=SMS



(16)
TRACE,TYPE=SMS ,ID=VTAMBUF

(15)
NOTRACE,TYPE=STATE



(16)
TRACE,TYPE=STATE STATE trace operands

194 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

(16)
TRACE,TYPE=VTAM, VIT operands



(17)
NOTRACE,TYPE=VTAM

TRANSLAT=(0,1,2,3,4,5,6,7)



TRANSLAT= value
()
,

(  )
OLUALIAS
0
DLUREAL
1
DLUSSCP
2
COSNAME
3
LOGMODES
4
LUANAME
5
USERVAR
6
DLUALIAS
7

(18) (19)
UNRCHTIM=(0,10) UPDDELAY=60



UNRCHTIM= unreachable_time UPDDELAY=max_time
(,partner_limit)
(unreachable_time,partner_limit)

(20)
VERIFYCP=NONE VFYRED=YES



USSTAB=table_name VERIFYCP= NONE VFYRED= YES
OPTIONAL NO
REQUIRED

(21) (22)
VFYREDTI=OFF VOSDEACT=NO VRTG=NO



VFYREDTI= OFF VOSDEACT= YES VRTG= YES
0 NO NO
reduction_timer

(23)
VRTGCPCP=YES VTAMEAS=32001



VRTGCPCP= YES VTAMEAS=number_of_concurrent_sessions
NO

Chapter 10. Start options 195

Start options

(24)
XCFINIT=YES XNETALS=NO


XCFINIT= NO XNETALS= NO
YES YES
DEFINE

Buffer pool values:

( , , , , ,

baseno bufsize slowpt F xpanno

, )
xpanpt xpanlim

BUF trace operands:

,AMOUNT=PARTIAL
,ID=node_name

,EVERY ,AMOUNT= FULL
PARTIAL

,IDTYPE=RESOURCE ,SAVE=YES


,IDTYPE= CP ,SAVE= NO
SSCP YES
RESOURCE

IO trace operands:

,IDTYPE=RESOURCE ,SAVE=YES
,ID=node_name
,EVERY ,IDTYPE= CP ,SAVE= NO
SSCP YES
RESOURCE

LINE trace operands:

,COUNT=ALL (25)
,ID=line_name
,COUNT= ALL
number_of_bytes

MODULE operands:

196 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

,OPTION= ALL
option
(option)
,

(  COMMAND )
CONNECTIONS
DEFINITION
INTERFACES
MANAGEMENT
NOEXIT
SESSION

Operands used with ID:

,IDTYPE=RESOURCE

,IDTYPE= CP
SSCP
RESOURCE

OPTION operand:

,OPTION= ALL
option
(option)
,

(  ADJCP )
APPL
CDRM
CDRSC
GROUP
LINE
LU
NCP
PU

SIT trace operands:

,COUNT=ALL (25)
,ID=line_name

,COUNT= ALL
number_of_bytes

,TRACEPT=trace_point_id

STATE trace operands:

,ID=node_name Operands used with ID

OPTION operand

Chapter 10. Start options 197

Start options

VIT operands:

,MODE=INT,SIZE=999,DSPSIZE=0


,BFRNUM=2
,MODE= EXT
,BFRNUM=number
INT
,SIZE=size ,DSPSIZE=dspsize

(26) (27)
,OPTION=(API,CIO,MSG,NRM,PIU,PSS,SMS,SSCP)


,SUBTRACE=ARBP,OPTION= HPR
ALL
(28)
(..,HPR,..)
,SUBTRACE= TGVC ,OPTION= SSCP
TREE ALL
(29)
(..,SSCP,..)
,OPTION= ALL
NONE
option
(option)
,

(  API )
APPC
CFS
CIA
CIO
CMIP
CSM
ESC
HPR
LCS
LOCK
MSG
NRM
PIU
PSS
SMS
SSCP
TCP
VCNS
XBUF
XCF

Notes:
1 NUMTREES is meaningful only if the NODETYPE=NN start option is also
used.
2 A VTAM operator cannot enter the PROMPT or NOPROMPT start option; it
can be coded only in ATCSTR00. The value coded in ATCSTR00 is ignored if
start options are entered on the START command or if VTAM finds an error
in a start list. Upon finding an error in a start list, VTAM prompts the
operator so that the operator can specify the option correctly.

198 z/OS V1R7.0 Comm Svr: Quick Reference

 Start options

3 QDIOSTG defaults to MAX for 64-bit (z/Architecture) machines and MIN for
non 64-bit machines.
4 RESUSAGE is meaningful only if the NODETYPE=NN start option is also
used.
5 ROUTERES is meaningful only if the NODETYPE=NN start option is also
used.
6 SAVERSCV is meaningful only if NODETYPE is also used.
7 The SECLVLCP start option is meaningful only if the NODETYPE and
VERIFYCP start options are also used.
8 SNVC is meaningful only if the BN=YES start option is also used.
9 SORDER is meaningful only in an interchange node or a migration data host.
10 SRCOUNT is meaningful only if the SRCHRED=ON start option is also used.
11 SRTIMER is meaningful only if the SRCHRED=ON start option is also used.
12 The SSCPDYN start option applies only for interconnected networks (that is,
GWSSCP=YES is used).
13 SSEARCH is meaningful only if the NODETYPE=NN start option is also
used.
14 HOSTNAME is meaningful only if the NODETYPE start option is also used.
If neither IPADDR nor HOSTNAME is specified on any of the GROUP
definition statements within the Enterprise Extender XCA major node, then
either the HOSTNAME, TCPNAME, or IPADDR start options must be
specified in order to activate an Enterprise Extender link.
15 Do not use NOTRACE when starting VTAM, except to override a TRACE
start option coded in a predefined list.
16 Code TRACE and its qualifiers on one line. Code the TYPE qualifier
immediately following TRACE.
17 NOTRACE,TYPE=VTAM is accepted but ignored. Tracing is started with the
default trace table size and the default options.
18 UNRCHTIM is meaningful only if the NODETYPE start option is also used.
19 UPDDELAY is meaningful only if the OSIMGMT=YES start option is also
used.
20 The VERIFYCP start option is meaningful only if the NODETYPE start option
is also used.
21 VFYREDTI is meaningful only if the NODETYPE=NN start option is also
used.
22 VRTG is meaningful only if the NODETYPE and HOSTSA start options are
also used.
23 VRTGCPCP is meaningful only if the NODETYPE and HOSTSA start options
are also used.
| 24 XCFINIT=YES is the default if VTAM is started as an APPN node (that is, the
| NODETYPE start option has been specified). XCFINIT=YES is not allowed for
| pure subarea nodes. XCFINIT=DEFINE is the default if VTAM is started as a
| pure subarea node (the NODETYPE start option has not been specified).
25 COUNT applies only to the IBM 3720 and 3745 Communication Controllers.

Chapter 10. Start options 199

Start options

26 The default options apply only to MODE=INT.

27 PSS and SMS can be turned off.
28 If multiple trace options are coded in parentheses, HPR must be one of the
options coded inside the parentheses when SUBTRACE=ARBP is coded.
29 If multiple trace options are coded in parentheses, SSCP must be one of the
options coded inside the parentheses when SUBTRACE=TGVC or
SUBTRACE=TREE is coded.

200 z/OS V1R7.0 Comm Svr: Quick Reference

Chapter 11. Other VTAM codes and commands
Table 2. Other VTAM codes and commands
Command type Reference
Status Codes Refer to z/OS Communications Server: IP and
SNA Codes.
Dump Analysis Tool Commands Refer to z/OS Communications Server: SNA
Diagnosis Vol 1, Techniques and Procedures.

© Copyright IBM Corp. 1984, 2005 201

VTAM commands

202 z/OS V1R7.0 Comm Svr: Quick Reference

Part 3. Appendixes

© Copyright IBM Corp. 1984, 2005 203

204 z/OS V1R7.0 Comm Svr: Quick Reference
 Appendix. Accessibility
Accessibility features help a user who has a physical disability, such as restricted
mobility or limited vision, to use software products successfully. The major
accessibility features in z/OS enable users to:
v Use assistive technologies such as screen readers and screen magnifier software
v Operate specific or equivalent features using only the keyboard
v Customize display attributes such as color, contrast, and font size

Using assistive technologies

Assistive technology products, such as screen readers, function with the user
interfaces found in z/OS. Consult the assistive technology documentation for
specific information when using such products to access z/OS interfaces.

Keyboard navigation of the user interface

Users can access z/OS user interfaces using TSO/E or ISPF. Refer to z/OS TSO/E
Primer, z/OS TSO/E User’s Guide, and z/OS ISPF User’s Guide Vol I for information
about accessing TSO/E and ISPF interfaces. These guides describe how to use
TSO/E and ISPF, including the use of keyboard shortcuts or function keys (PF
keys). Each guide includes the default settings for the PF keys and explains how to
modify their functions.

z/OS information
| z/OS information is accessible using screen readers with the BookServer/Library
| Server versions of z/OS books in the Internet library at:
| www.ibm.com/servers/eserver/zseries/zos/bkserv/

© Copyright IBM Corp. 1984, 2005 205

206 z/OS V1R7.0 Comm Svr: Quick Reference
|

Notices
IBM may not offer all of the products, services, or features discussed in this
document. Consult your local IBM representative for information on the products
and services currently available in your area. Any reference to an IBM product,
program, or service is not intended to state or imply that only that IBM product,
program, or service may be used. Any functionally equivalent product, program,
or service that does not infringe any IBM intellectual property right may be used
instead. However, it is the user’s responsibility to evaluate and verify the operation
of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:

IBM Director of Licensing

IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.

For license inquiries regarding double-byte (DBCS) information, contact the IBM
Intellectual Property Department in your country or send inquiries, in writing, to:

IBM World Trade Asia Corporation

Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan

The following paragraph does not apply to the United Kingdom or any other
country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION ″AS IS″ WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warranties in certain transactions, therefore, this statement may not apply
to you.

This information could include technical inaccuracies or typographical errors.

Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this IBM
product and use of those Web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.

© Copyright IBM Corp. 1984, 2005 207

 Licensees of this program who wish to have information about it for the purpose
of enabling: (i) the exchange of information between independently created
programs and other programs (including this one) and (ii) the mutual use of the
information which has been exchanged, should contact:

Site Counsel
IBM Corporation
P.O. Box 12195
3039 Cornwallis Road
Research Triangle Park, North Carolina 27709-2195
U.S.A

Such information may be available, subject to appropriate terms and conditions,

including in some cases, payment of a fee.

The licensed program described in this information and all licensed material
available for it are provided by IBM under terms of the IBM Customer Agreement,
IBM International Program License Agreement, or any equivalent agreement
between us.

Any performance data contained herein was determined in a controlled

environment. Therefore, the results obtained in other operating environments may
vary significantly. Some measurements may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurement may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.

Information concerning non-IBM products was obtained from the suppliers of

those products, their published announcements or other publicly available sources.
IBM has not tested those products and cannot confirm the accuracy of
performance, compatibility or any other claims related to non-IBM products.
Questions on the capabilities of non-IBM products should be addressed to the
suppliers of those products.

All statements regarding IBM’s future direction or intent are subject to change or
withdrawal without notice, and represent goals and objectives only.

All IBM prices shown are IBM’s suggested retail prices, are current and are subject
to change without notice. Dealer prices may vary.

This information is for planning purposes only. The information herein is subject to
change before the products described become available.

This information contains examples of data and reports used in daily business
operations. To illustrate them as completely as possible, the examples include the
names of individuals, companies, brands, and products. All of these names are
fictitious and any similarity to the names and addresses used by an actual business
enterprise is entirely coincidental.

COPYRIGHT LICENSE:

This information contains sample application programs in source language, which

illustrates programming techniques on various operating platforms. You may copy,
modify, and distribute these sample programs in any form without payment to
IBM, for the purposes of developing, using, marketing or distributing application

208 z/OS V1R7.0 Comm Svr: Quick Reference

programs conforming to the application programming interface for the operating
platform for which the sample programs are written. These examples have not
been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or
imply reliability, serviceability, or function of these programs. You may copy,
modify, and distribute these sample programs in any form without payment to
IBM for the purposes of developing, using, marketing, or distributing application
programs conforming to IBM’s application programming interfaces.

Each copy or any portion of these sample programs or any derivative work must
include a copyright notice as follows:

© (your company name) (year). Portions of this code are derived from IBM Corp.
Sample Programs. © Copyright IBM Corp. _enter the year or years_. All rights
reserved.

IBM is required to include the following statements in order to distribute portions

of this document and the software described herein to which contributions have
been made by The University of California. Portions herein © Copyright 1979,
1980, 1983, 1986, Regents of the University of California. Reproduced by
permission. Portions herein were developed at the Electrical Engineering and
Computer Sciences Department at the Berkeley campus of the University of
California under the auspices of the Regents of the University of California.

Portions of this publication relating to RPC are Copyright © Sun Microsystems,

Inc., 1988, 1989.

Some portions of this publication relating to X Window System** are Copyright ©

1987, 1988 by Digital Equipment Corporation, Maynard, Massachusetts, and the
Massachusetts Institute Of Technology, Cambridge, Massachusetts. All Rights
Reserved.

Some portions of this publication relating to X Window System are Copyright ©

1986, 1987, 1988 by Hewlett-Packard Corporation.

Permission to use, copy, modify, and distribute the M.I.T., Digital Equipment
Corporation, and Hewlett-Packard Corporation portions of this software and its
documentation for any purpose without fee is hereby granted, provided that the
above copyright notice appears in all copies and that both that copyright notice
and this permission notice appear in supporting documentation, and that the
names of M.I.T., Digital, and Hewlett-Packard not be used in advertising or
publicity pertaining to distribution of the software without specific, written prior
permission. M.I.T., Digital, and Hewlett-Packard make no representation about the
suitability of this software for any purpose. It is provided ″as is″ without express
or implied warranty.

Copyright © 1983, 1995-1997 Eric P. Allman

Copyright © 1988, 1993 The Regents of the University of California. All rights
reserved.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.

Notices 209
 2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
This product includes software developed by the University of
California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors may be
used to endorse or promote products derived from this software without
specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS

IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

This software program contains code, and/or derivatives or modifications of code

originating from the software program ″Popper.″ Popper is Copyright ©1989-1991
The Regents of the University of California, All Rights Reserved. Popper was
created by Austin Shelton, Information Systems and Technology, University of
California, Berkeley.

Permission from the Regents of the University of California to use, copy, modify,
and distribute the ″Popper″ software contained herein for any purpose, without
fee, and without a written agreement is hereby granted, provided that the above
copyright notice and this paragraph and the following two paragraphs appear in
all copies. HOWEVER, ADDITIONAL PERMISSIONS MAY BE NECESSARY
FROM OTHER PERSONS OR ENTITIES, TO USE DERIVATIVES OR
MODIFICATIONS OF POPPER.

IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY

PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, INCLUDING LOST PROFITS, ARISING OUT OF THE USE OF THE
POPPER SOFTWARE, OR ITS DERIVATIVES OR MODIFICATIONS, AND ITS
DOCUMENTATION, EVEN IF THE UNIVERSITY OF CALIFORNIA HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE POPPER SOFTWARE PROVIDED HEREUNDER IS ON AN ″AS
IS″ BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATIONS
TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
MODIFICATIONS.

Copyright © 1983 The Regents of the University of California. All rights reserved.

210 z/OS V1R7.0 Comm Svr: Quick Reference

Redistribution and use in source and binary forms are permitted provided that the
above copyright notice and this paragraph are duplicated in all such forms and
that any documentation, advertising materials, and other materials related to such
distribution and use acknowledge that the software was developed by the
University of California, Berkeley. The name of the University may not be used to
endorse or promote products derived from this software without specific prior
written permission. THIS SOFTWARE IS PROVIDED ``AS IS’’ AND WITHOUT
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.

Copyright © 1991, 1993 The Regents of the University of California. All rights
reserved.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
This product includes software developed by the University of
California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors may be
used to endorse or promote products derived from this software without
specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS

IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

Copyright © 1990 by the Massachusetts Institute of Technology

Export of this software from the United States of America may require a specific
license from the United States Government. It is the responsibility of any person or
organization contemplating export to obtain such a license before exporting.

WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this
software and its documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting documentation,
and that the name of M.I.T. not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior permission. Furthermore

Notices 211
 if you modify this software you must label your software as modified software and
not distribute it in such a fashion that it might be confused with the original M.I.T.
software. M.I.T. makes no representations about the suitability of this software for
any purpose. It is provided ″as is″ without express or implied warranty.

Copyright © 1998 by the FundsXpress, INC. All rights reserved.

Export of this software from the United States of America may require a specific
license from the United States Government. It is the responsibility of any person or
organization contemplating export to obtain such a license before exporting.

WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this
software and its documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting documentation,
and that the name of FundsXpress not be used in advertising or publicity
pertaining to distribution of the software without specific, written prior
permission. FundsXpress makes no representations about the suitability of this
software for any purpose. It is provided ″as is″ without express or implied
warranty.

THIS SOFTWARE IS PROVIDED ``AS IS’’ AND WITHOUT ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.

Copyright © 1999, 2000 Internet Software Consortium.

Permission to use, copy, modify, and distribute this software for any purpose with
or without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.

THE SOFTWARE IS PROVIDED ″AS IS″ AND INTERNET SOFTWARE

CONSORTIUM DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE CONSORTIUM
BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).

The implementation was written so as to conform with Netscape’s SSL.

This library is free for commercial and non-commercial use as long as the
following conditions are adhered to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young’s, and as such any Copyright notices in the code are
not to be removed. If this package is used in a product, Eric Young should be

212 z/OS V1R7.0 Comm Svr: Quick Reference

given attribution as the author of the parts of the library used. This can be in the
form of a textual message at program startup or in documentation (online or
textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement: ″This product includes cryptographic
software written by Eric Young (eay@cryptsoft.com)″. The word ’cryptographic’
can be left out if the routines from the library being used are not cryptographic
related.
4. If you include any Windows specific code (or a derivative thereof) from the
apps directory (application code) you must include acknowledgement:
″This product includes software written by Tim Hudson (tjh@cryptsoft.com)″

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.

The license and distribution terms for any publicly available version or derivative
of this code cannot be changed. i.e. this code cannot simply be copied and put
under another distribution license [including the GNU Public License.]

This product includes cryptographic software written by Eric Young.

Copyright © 1999, 2000 Internet Software Consortium.

Permission to use, copy, modify, and distribute this software for any purpose with
or without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.

THE SOFTWARE IS PROVIDED ″AS IS″ AND INTERNET SOFTWARE

CONSORTIUM DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE CONSORTIUM
BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Notices 213
 Copyright © 2004 IBM Corporation and its licensors, including Sendmail, Inc., and
the Regents of the University of California. All rights reserved.

Copyright © 1999,2000,2001 Compaq Computer Corporation

Copyright © 1999,2000,2001 Hewlett-Packard Company

Copyright © 1999,2000,2001 IBM Corporation

Copyright © 1999,2000,2001 Hummingbird Communications Ltd.

Copyright © 1999,2000,2001 Silicon Graphics, Inc.

Copyright © 1999,2000,2001 Sun Microsystems, Inc.

Copyright © 1999,2000,2001 The Open Group

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the ″Software″), to deal in the
Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, provided that the
above copyright notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s) and this permission notice
appear in supporting documentation.

THE SOFTWARE IS PROVIDED ″AS IS″, WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE
FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used
in advertising or otherwise to promote the sale, use or other dealings in this
Software without prior written authorization of the copyright holder.

X Window System is a trademark of The Open Group.

If you are viewing this information softcopy, photographs and color illustrations
may not appear.

You can obtain softcopy from the z/OS Collection (SK3T-4269), which contains
BookManager® and PDF formats of unlicensed books and the z/OS Licensed
Product Library (LK3T-4307), which contains BookManager and PDF formats of
licensed books.

214 z/OS V1R7.0 Comm Svr: Quick Reference

Trademarks
The following terms are trademarks of the IBM Corporation in the United States or
other countries or both:

Advanced Peer-to-Peer Networking MVS/XA

AFP NetView
AD/Cycle Network Station
AIX Nways
AIX/ESA Notes
AnyNet OfficeVision/MVS
APL2 OfficeVision/VM
AS/400 Open Class
AT OS/2
BookManager OS/390
BookMaster OS/400
C/370 Parallel Sysplex
CICS PR/SM
CICS/ESA PROFS
C/MVS PS/2
Common User Access RACF
C Set ++ Redbooks
CT Resource Link
CUA RETAIN
DB2 RISC System/6000
DFSMSdfp RMF
DFSMShsm RS/6000
DFSMS/MVS S/370
DPI S/390
Domino S/390 Parallel Enterprise Server
DRDA SAA
Enterprise Systems Architecture/370 SecureWay
ESCON SP
eServer SP2
ES/3090 SQL/DS
ES/9000 System/360
ES/9370 System/370
EtherStreamer System/390
Extended Services SystemView
FFST Tivoli
FFST/2 TURBOWAYS
First Failure Support Technology VM/ESA
GDDM VSE/ESA
IBM VTAM
IBMLink WebSphere
IMS XT
IMS/ESA z/Architecture
HiperSockets z/OS
Language Environment zSeries

LANStreamer z/VM
Library Reader 400
LPDA 3090
Micro Channel 3890
Multiprise
MVS
MVS/DFP
MVS/ESA
MVS/SP

Notices 215
 DB2 and NetView are registered trademarks of International Business Machines
Corporation or Tivoli Systems Inc. in the U.S., other countries, or both.

The following terms are trademarks of other companies:

ATM is a trademark of Adobe Systems, Incorporated.

BSC is a trademark of BusiSoft Corporation.

CSA is a trademark of Canadian Standards Association.

DCE is a trademark of The Open Software Foundation.

HYPERchannel is a trademark of Network Systems Corporation.

| Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the
| United States, other countries, or both.

| Linux is a trademark of Linus Torvalds in the United States, other countries, or

| both.

UNIX is a registered trademark of The Open Group in the United States and other
countries.

Microsoft, Windows, Windows NT, and the Windows logo are trademarks of
Microsoft Corporation in the United States, other countries, or both.

| Intel is a registered trademark of Intel Corporation or its subsidiaries in the United

| States and other countries.

Other company, product, and service names may be trademarks or service marks
of others.

216 z/OS V1R7.0 Comm Svr: Quick Reference




Program Number: 5694–A01 and 5655–G52

Printed in USA

SX75-0124-05
Spine information:

 z/OS Communications Server z/OS V1R7.0 Comm Svr: Quick Reference Version 1 Release 7