1783 td001 - en P

Technical Data
Stratix Ethernet Device Specifications

Stratix 5700 Catalog Numbers 1783-BMS06SL, 1783-BMS06SA, 1783-BMS06TL, 1783-BMS06TA, 1783-BMS06SGL, 1783-BMS06SGA, 1783-BMS06TGL, 1783-BMS06TGA, 1783-BMS10CL, 1783-BMS10CA, 1783-BMS10CGL,1783-BMS10CGA, 1783-BMS10CGP, 1783-BMS10CGN, 1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK, 1783-BMS20CL, 1783-BMS20CA, 1783-BMS20CGL, 1783-BMS20CGP, 1783-BMS20CGN, 1783-BMS20CGPK Stratix 8000 and Stratix 8300 Catalog Numbers 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T, 1783-MX04E, 1783-MX04T04E, 1783-MX04S, 1783-MX08S, 1783-MX08T, 1783-MX08F Stratix 6000 Catalog Numbers 1783-EMS08T, 1783-EMS04T Embedded Switch Technology Catalog Numbers 1783-ETAP, 1783-ETAP1F, 1783-ETAP2F Stratix 2000 Catalog Numbers 1783-US03T01F, 1783-US06T01F, 1783-US05T, 1783-US08T, 1783-US5T, 1783-US8T Stratix 5900 Catalog Number 1783-SR
Topic Stratix 5700 Ethernet Managed Switches Stratix 8000 and Stratix 8300 Ethernet Managed Switches Stratix 6000 Ethernet Managed Switches Embedded Switch Technology Stratix 2000 Ethernet Unmanaged Switches Stratix 5900 Services Router Accessories Additional Resources
Page 2 10 17 20 24 29 32 33
Summary of Changes
This manual contains new and updated information. Changes throughout this revision are marked by change bars, as shown to the left of this paragraph.
Topic Addition of Stratix 5700 Power over Ethernet switches (cat. nos. 1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK) Addition of Stratix 8000 and Stratix 8300 Power over Ethernet, expansion modules (cat. nos. 1783-MX04E, 1783-MX04T04E) Addition of Stratix 2000 unmanaged switch with 5 copper ports (cat. no. 1783-US5T) Addition of Stratix 5900 services router (cat. no. 1783-SR) Page 5 13 24 29
Stratix 5700 Ethernet Managed Switches

Cat. No. Total Ports RJ45 Ports(1) Combo Ports Power Over Ethernet Ports (PoE/PoE+) 4 FE 4 FE 6 FE 6 FE 4 FE 4 FE 4FE + 2 GE 4 FE + 2 GE 8 FE 8 FE 8 FE 8 FE 8 FE 8 FE 12 FE 12 FE 12 FE 16 FE 16 FE 16 FE 16 FE 16 FE 16 FE 2 FE 2 FE 2 GE 2 GE 2 GE 2 GE 2 GE 2 GE 2 GE 2 FE 2 FE 2 GE 2 GE 2 GE 2 GE 4 FE 4 FE 4 FE SFP Slots Software Type CIP Sync (IEEE 1588) NAT Conformal Coating
1783-BMS06SL 1783-BMS06SA 1783-BMS06TL 1783-BMS06TA 1783-BMS06SGL 1783-BMS06SGA 1783-BMS06TGL 1783-BMS06TGA 1783-BMS10CL 1783-BMS10CA 1783-BMS10CGL 1783-BMS10CGA 1783-BMS10CGP 1783-BMS10CGN 1783-BMS12T4E2CGL 1783-BMS12T4E2CGP
6 6 6 6 6 6 6 6 10 10 10 10 10 10 18 18
2 FE 2 FE 2 GE 2 GE 2 FE 2 FE 2 FE 2 FE 2 FE 2 FE
Lite Full Lite Full Lite Full Lite Full Lite Full Lite Full Full Full Lite Full Full Lite Full Lite Full Full Full
Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes
Yes Yes
1783-BMS12T4E2CGNK 18 1783-BMS20CL 1783-BMS20CA 1783-BMS20CGL 1783-BMS20CGP 1783-BMS20CGN 1783-BMS20CGPK 20 20 20 20 20 20
(1) FE = Fast Ethernet; GE = Gigabit Ethernet.
Rockwell Automation Publication 1783-TD001E-EN-P - December 2013
Technical Specifications - Stratix 5700 Switches

Attribute 1783-BMS06SL, 1783-BMS06SA, 1783-BMS06TL, 1783-BMS06TA, 1783-BMS06SGL, 1783-BMS06SGA, 1783-BMS06TGL, 1783-BMS06TGA 1 A @ 30V DC or 0.5 A @ 48V DC 0.52.0 A max @ 1248V DC 9.5 W @ 24V DC @ 40 C (104 F) 15 W max 12.5 W @ 24V DC/40 C (104 F) 17 W max 15 W @ 24V DC/40 C (104 F) 20 W max 0.53.0 A max @ 1248V DC 21 W @ 24V DC/40 C (104 F) 30 W max 1783-BMS10CL, 1783-BMS10CA, 1783-BMS10CGL, 1783-BMS10CGA 1783-BMS10CGN, 1783-BMS10CGP 1783-BMS20CL, 1783-BMS20CA, 1783-BMS20CGL, 1783-BMS20CGP, 1783-BMS20CGN, 1783-BMS20CGPK
Alarm relay ratings Power requirements Power consumption Isolation voltage
50V (continuous), basic insulation type, DC power ports to ground, DC power ports to Ethernet ports, and DC power ports to alarm ports No isolation between individual Ethernet ports No isolation between console port and system Type tested at 850V DC for 60 s RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.50.8 mm2 (2018 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater, 1.2 mm (3/64 in.) insulation max, 6.3 mm (0.25 in.) 0.5 mm (0.02 in.) strip length 0.50.8 mm2 (2018 AWG) solid or stranded, UL/CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire (such as Belden part number 9318), 6.3 mm (0.25 in.) 0.5 mm (0.02 in.) strip length 4.0 mm2 (12 AWG) min, stranded copper wire 1783-SFP100FX 1783-SFP1GSX 1783-SFP100LX 1783-SFP1GLX
Ethernet connections DC power connections Alarm connections Ground connection SFP modules(1)
Memory card Torque Weight, approx Wiring category(2)
1784-SD1 0.23 Nm (2.0 lbin) on power and alarm connectors 0.96 Nm (8.5 lbin) max on ground terminals 1.11 kg (2.45 lb) 3 - on console and alarm ports 2 - on DC power ports 2 - on Ethernet ports None (open-style) T4 T4 1.25 kg (2.75 lb) 1.38 kg (3.05 lb) 2.04 kg (4.50 lb)
Enclosure type rating North American temp code IEC temp code
(1) SFP modules supported only on switches with combo ports or SFP slots. (2) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Environmental Specifications - Stratix 5700 Switches

Attribute
Stratix 5700 Switches -4060 C (-40140 F)
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3 EFT/B immunity IEC 61000-4-4
60 C (140 F) -4085 C (-40185 F)
595% noncondensing 2 g @ 10500 Hz 30 g 55 g Class A 8 kV contact discharges 15 kV air discharges 20V/m with 1 kHz sine-wave 80% AM from 801000 MHz 20V/m with 200 Hz 50% pulse 100% AM at 900 MHz 10V/m with 1 kHz sine-wave 80% AM from 10002700 MHz 4 kV at 5 kHz and 2 kV at 100 kHz on DC power ports 4 kV at 2.5 kHz, 2 kV at 5 kHz, and 1 kV at 100 kHz on alarm ports 4 kV at 2.5 kHz, 2 kV at 5 kHz, and 1 kV at 100 kHz on Ethernet ports 1 kV line-line (DM) and 2 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on Ethernet ports 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 10 ms interruption on DC supply ports 1 kV line-line (DM) and 2.5 kV line-earth (CM) on power ports
Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Voltage variation IEC 61000-4-29 Damped oscillatory wave immunity IEC 61000-4-18
Technical Specifications - Stratix 5700 Power over Ethernet Switches

Attribute Ethernet data rate Alarm relay ratings Power requirements Power over Ethernet input power Power consumption Isolation voltage 1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK 10/100 Mbps 30V DC, 1 A or 48V DC, 0.5 A 12...48V DC, 0.53.0 A max 48V DC for PoE 54V DC for PoE+ or a combination of PoE and PoE+ 15 W @ 24V DC 40 C (104 F) 20 W max 60 V (continuous), basic insulation type, DC power ports to ground, and PoE power ports to ground No isolation between individual Ethernet ports No isolation between PoE power and Ethernet ports No isolation between console port and system Type tested at 1585V DC for 60 s RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.50.8 mm2 (2018 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater, 1.2 mm (3/64 in.) insulation max, 6.3 mm (0.25 in.) 0.5 mm (0.02 in.) strip length 0.50.8 mm2 (2018 AWG) solid or stranded, UL/CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire (such as Belden part number 9318), 6.3 mm (0.25 in.) 0.5 mm (0.02 in.) strip length 4.0 mm2 (12 AWG) min, stranded copper wire 1783-SFP100FX 1783-SFP1GSX 1783-SFP100LX 1783-SFP1GLX
Ethernet connections DC power connections Alarm connections
Ground connection SFP modules(1)
Memory card Torque Weight, approx Wiring category(2)
1784-SD1 0.23 Nm (2.0 lbin) on power and alarm connectors 0.96 Nm (8.5 lbin) max on ground terminals 1.11 kg (2.45 lb) 3 - on console and alarm ports 2 - on DC power ports 2 - on Ethernet ports Alarm not rated None (open-style) T4 T4
Pilot duty rating Enclosure type rating North American temp code IEC temp code
(1) SFP modules supported only on switches with combo ports or SFP slots.
(2) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Environmental Specifications - Stratix 5700 Power over Ethernet Switches

Attribute
1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK -4060 C (-40140 F)
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3
60 C (140 F) -4085 C (-40185 F)
595% noncondensing 2 g @ 10500 Hz 30 g 55 g Class A 6 kV contact discharges 8 kV air discharges 10V/m with 1 kHz sine-wave 80% AM from 801000 MHz 10V/m with 200 Hz 50% pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% pulse 100% AM at 1890 MHz 1V/m with 1 kHz sine-wave 80% AM from 10002700 MHz 4 kV at 5 kHz on DC power ports 4 kV at 5 kHz on alarm ports 4 kV at 5 kHz on Ethernet ports 1 kV line-line (DM) and 2 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on Ethernet ports 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 1 kV line-line (DM) and 2.5 kV line-earth (CM) on power ports
EFT/B immunity IEC 61000-4-4
Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Damped oscillatory wave immunity IEC 61000-4-18
Certifications - Stratix 5700 Switches

Certifications (when product is marked)(1) c-UL-us Stratix 5700 Switches UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. AEx/Ex nA nC IIC T4 Gc X European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical Documentation Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements II 3 G Ex nA nC IIC T4 Gc X Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 ODVA conformance tested to EtherNet/IP specifications
CE
C-Tick Ex
Korean EtherNet/IP
(1) See the Product Certification link at http://www.ab.com for declarations of conformity, certificates, and other certification details.
Dimensions - Stratix 5700 Switches

To prevent the switch from overheating, observe the following minimum clearances: Top and bottom: 50.8 mm (2.0 in.) Sides: 50.8 mm (2.0 in.) Front: 50.8 mm (2.0 in.) These diagrams are representative of the Stratix 5700 switches. Actual faceplates vary depending on the catalog number.
6-port Switches (1783-BMS06SL, 1783-BMS06SA, 1783-BMS06TL, 1783-BMS06TA, 1783-BMS06SGL, 1783-BMS06SGA, 1783-BMS06TGL, 1783-BMS06TGA) 7.48 cm (2.94 in.) 10-port Switches (1783-BMS10CL, 1783-BMS10CA, 1783-BMS10CGL, 1783-BMS10CGA)
9.14 cm (3.6 in.)
12.95 cm (5.1 in.)
12.95 cm (5.1 in.)
11.67 cm (4.59 in.) 10.92 cm (4.3 in.)
0.75 cm (0.29 in.)
11.67 cm (4.59 in.) 10.92 cm (4.3 in.)
0.75 cm (0.29 in.)
10-port Switches (1783-BMS10CGP, 1783-BMS10CGN)
18-port and 20-port Switches (1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK, 1783-BMS20CL, 1783-BMS20CA, 1783-BMS20CGL, 1783-BMS20CGP, 1783-BMS20CGN, 1783-BMS20CGPK) 12.7 cm (5.0 in.)
9.14 cm (3.6 in.)
12.95 cm (5.1 in.)
12.95 cm (5.1 in.)
13.58 cm (5.34 in.) 12.83 cm (5.05 in.)
0.75 cm (0.29 in.)
13.58 cm (5.34 in.) 12.83 cm (5.05 in.)
0.75 cm (0.29 in.)
Stratix 8000 and Stratix 8300 Ethernet Managed Switches

Technical Specifications - Stratix 8000 and Stratix 8300 Switches
Attribute Description 1783-MS06T Stratix 8000 managed switch, Layer 2 6 ports 2.0 A 2 A max @ 1860V DC, CL 2/SELV 1 A max @ 30V DC, CL 2/SELV 15.1 W 15.7 W 15.1 W 15.7 W 1783-MS10T Stratix 8000 managed switch, Layer 2 10 ports 1783-RMS06T Stratix 8300 managed switch, Layer 3 6 ports 1783-RMS10T Stratix 8300 managed switch, Layer 3 10 ports
Inrush current, max Switch input rating, max Alarm relay rating, max Power dissipation Isolation voltage
75 V (continuous), basic insulation type, power to ground, power to network channels, and power to alarm No isolation between individual Ethernet ports No isolation between console port and system Type tested at 1000V AC for 60 s RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.50.8 mm2 (2018 AWG) solid or stranded copper wire rated at 90 C (194 F) or greater, 1.2 mm (3/64 in.) insulation max 3.35.3 mm2 (1210 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater 1783-SFP100FX 1783-SFP1GSX 1783-SFP100LX 1783-SFP1GLX 1783-RMCF
Ethernet connections DC power and alarm connections Functional ground connection SFP modules(1)
Memory card Torque Wiring category(2)
1783-MCF 0.23 Nm (2.0 lbin) on power and alarm connectors 2 - on alarm ports 2 - on power ports 2 - on Ethernet ports None (open-style) T4 T4
Enclosure type rating North American temp code IEC temp code
10
Environmental Specifications - Stratix 8000 and Stratix 8300 Switches

Attribute Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T -4060 C (-40140 F)
60 C (140 F) -4085 C (-40185 F)
595% noncondensing 2 g @ 10500 Hz 20 g 30 g Class A 8 kV contact discharges 15 kV air discharges 20V/m with 1 kHz sine-wave 80% AM from 801000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 10V/m with 1 kHz sine-wave 80% AM from 10002700 MHz 4 kV at 2.5 kHz and 2 kV at 5 kHz on power ports 4 kV at 2.5 kHz and 2 kV at 5 kHz on alarm ports 4 kV at 2.5 kHz and 2 kV at 5 kHz on Ethernet ports 1 kV line-line (DM) and 2 kV line-earth (CM) on power ports 1 kV line-line (DM) and 2 kV line-earth (CM) on alarm ports 2 kV line-earth (CM) on Ethernet ports 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 30 A/m long duration and 300 A/m short duration at 50 and 60 Hz 2.5 kV 10 ms interruption on DC supply ports
EFT/B immunity IEC 61000-4-4
Surge transient immunity IEC 61000-4-5
Conducted RF immunity IEC 61000-4-6 Magnetic field immunity IEC 61000-4-8 Magnetic pulse immunity IEC 61000-4-9 Oscillatory surge withstand IEEE C37.90.1 Voltage variation IEC 61000-4-29
11
Certifications - Stratix 8000 and Stratix 8300 Switches

Certifications (when product is marked)(1) c-UL-us 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical Documentation Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements II 3 G Ex nA nC IIC T4 Gc Korean Certification of Broadcasting and Communications Equipment, compliant with: Framework Act on Telecommunications and Radio Waves Act ODVA conformance tested to EtherNet/IP specifications
CE
C-Tick Ex
KC EtherNet/IP
Optional Expansion Modules - Stratix 8000 and Stratix 8300 Switches

Cat. No. 1783-MX08T 1783-MX08F 1783-MX04S 1783-MX08S 1783-MX04E 1783-MX04T04E Description Expansion module with 8 10/100 Base-T copper Ethernet ports Expansion module with 8 100 Base-F fiber-optic Ethernet ports Expansion module with 4 100 FX fiber-optic SFP slots Expansion module with 8 100 FX fiber-optic SFP slots Expansion module with 4 Power over Ethernet ports Ethernet expansion module with 4 10/100 Base-T copper Ethernet ports and 4 Power over Ethernet ports
Technical Specifications - Stratix 8000 and Stratix 8300 Expansion Modules

Attribute Description Backplane power Power consumption Isolation voltage 1783-MX08T Expansion module 8 ports, copper 3.3V DC, 1.7 A max 5.6 W 75 V (continuous), basic insulation type, expansion backplane to network channels No isolation between individual Ethernet ports Type tested at 1000V AC for 60 s 1783-MX08F Expansion module 8 ports, fiber 3.3V DC, 3.6 A max 11.8 W 1783-MX04S Expansion module 4 SFP ports, fiber 3.3V DC, 2.5 A max 8.25 W 1783-MX08S Expansion module 8 SFP ports, fiber 3.3V DC, 4.0 A max 13.2 W
12
Technical Specifications - Stratix 8000 and Stratix 8300 Expansion Modules

Attribute Ethernet connections 1783-MX08T RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 2 - on Ethernet ports None (open-style) T4 T4 1783-MX08F 1783-MX04S 1783-MX08S
SFP modules Wiring category(1) Enclosure type rating North American temp code IEC temp code
1783-SFP100FX 1783-SFP100LX
Technical Specifications - Stratix 8000 and Stratix 8300 Fiber Expansion Module
Attribute Ethernet data rate Connecting mode Optical wavelength Optical cable length, max Optical link budget Connector type 1783-MX08F 100 Mbps Full duplex 1310 nm Graded index multimode fiber; 2000 m 8 db with 62.5/125 m multimode cable 4 db with 50/125 m multimode cable IEC 61754-20 LC connector
Technical Specifications - Stratix 8000 and Stratix 8300 Power over Ethernet Expansion Modules
Attribute Description 1783-MX04E Expansion module 4 ports, Power over Ethernet 3.3V DC, 0.94 A max 48V DC for PoE 54V DC for PoE+ or a combination of PoE and PoE+ 2.5 A max 3.0 W 1783-MX04T04E Expansion module 4 ports, copper 4 ports, Power over Ethernet 3.34V DC, 1.08 A max 48V DC for PoE 54V DC for PoE+ or a combination of PoE and PoE+ 2.4 A max 3.6 W
Backplane power Power over Ethernet input power
Power dissipation Isolation voltage
60 V (continuous), basic insulation type, expansion backplane to network ports, expansion backplane to power ports, and power ports to network ports No isolation between individual network ports Type tested at 1570V DC for 60 s RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 2 - on Ethernet ports 2 - on power ports
Ethernet connections SFP modules Wiring category(1)
13
Technical Specifications - Stratix 8000 and Stratix 8300 Power over Ethernet Expansion Modules
Attribute Enclosure type rating North American temp code IEC temp code 1783-MX04E None (open-style) T4 T4 1783-MX04T04E
Environmental Specifications - Stratix 8000 and Stratix 8300 Expansion Modules

Attribute Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3 1783-MX08T -4060 C (-40140 F) 1783-MX08F 1783-MX04S, 1783-MX08S 1783-MX04E, 1783-MX04T04E
60 C (140 F) -4085 C (-40185 F)
595% noncondensing 2 g @ 10500 Hz 20 g 30 g Class A 8 kV contact discharges 15 kV air discharges 20V/m with 1 kHz sine-wave 80% AM from 801000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 10V/m with 1 kHz sine-wave 80% AM from 10002700 MHz 4 kV at 2.5 kHz and 2 kV at 5 kHz on Ethernet ports 2 kV line-earth (CM) on Ethernet ports 6 kV contact discharges 8 kV air discharges 10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 2 kV at 5 kHz on power ports and 2 kV at 5 kHz on Ethernet ports 1 kV line-line(DM) and 2 kV line-earth(CM) on power ports 2 kV line-earth(CM) on communication ports 15 g
EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5
14
Environmental Specifications - Stratix 8000 and Stratix 8300 Expansion Modules

Attribute Conducted RF immunity IEC 61000-4-6 Magnetic field immunity IEC 61000-4-8 Magnetic pulse immunity IEC 61000-4-9 Oscillatory surge withstand IEEE C37.90.1 Damped oscillatory wave immunity IEC 61000-4-18 1783-MX08T 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 1783-MX08F 1783-MX04S, 1783-MX08S 1783-MX04E, 1783-MX04T04E 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 30 A/m long duration and 300 A/m short duration at 50 Hz 300 A/m pulse 1 kV line-line(DM) and 2.5 kV line-earth(CM) on power ports
30 A/m long duration and 300 A/m short duration at 50 and 60 Hz 2.5 kV
Certifications - Stratix 8000 and Stratix 8300 Expansion Modules

Certifications (when product is marked)(1) c-UL-us 1783-MX08T, 1783-MX08F 1783-MX04S, 1783-MX08S 1783-MX04E, 1783-MX04T04E
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. Ex nA IIC T4X Gc X / AEx nA IIC T4X Gc European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical Documentation Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc Korean Certification of Broadcasting and Communications Equipment, compliant with: Framework Act on Telecommunications and Radio Waves Act ODVA conformance tested to EtherNet/IP specifications
CE
C-Tick Ex
KC EtherNet/IP
15
Dimensions - Stratix 8000 and Stratix 8300 Switches

This illustration shows dimensions for the 1783-MS10T switch and the 1783-MX08T expansion module. Dimensions for the other switches are the same as the 1783-MS10T switch. Dimensions for the other expansion modules are the same as the 1783-MX08T expansion module.
Switch and Expansion Module
15.3 cm (6.03 in.) 9.71 cm (3.82 in.)
Switch and Expansion Module (mated)

24.3 cm (9.57 in.)
14.8 cm (5.83 in.)
9.81 cm (3.87 in.) 33.27 cm (13.1 in.) 11.1 cm (4.38 in.)
Switch (side view)
Switch and Expansion Modules (mated)
11.75 cm (4.63 in.)

31801-M
For panel-mounting, the height of the center of the mounting holes on both the top and bottom latches measures 8.73 mm (0.34 in.) above the top surface (or below the bottom surface) of the switch. On the switch base unit, the tab hole center-to-center spacing is 6.83 cm (2.69 in.). For expansion modules, the tab hole center-to-center spacing is 4.36 cm (1.72 in.).
Airflow around the switch and through the vents is unrestricted. To prevent the switch from overheating, these minimum clearances must be met: Top and bottom: 105 mm (4.13 in.) Left and right: 90 mm (3.54 in.) Front: 65 mm (2.56 in.)
16
Stratix 6000 Ethernet Managed Switches

Attribute 1783-EMS08T 1783-EMS04T
Description
Stratix 6000 managed switch 8 ports 1 fiber SFP slot 250 mA @ 24V DC (1248V DC) CL 2/SELV 5.8 W 24.6 BTU/hr @ 60 C (140 F) 8 RJ45 10/100 full/half duplex ports, optional SFP transceiver port
Stratix 6000 managed switch 4 ports 100 mA @ 24V DC (1248V DC) CL 2/SELV 2.6 W
Power requirements Power dissipation, max Thermal dissipation, max Network ports Protocols Indicators EtherNet/IP features Switch features Options Inrush current, max Isolation voltage
4 RJ45 10/100 full/half duplex ports
TCP/IP, EtherNet/IP, Telnet, Http, DHCP, BOOTP, FTP, IGMP, SMTP 16 port indicators 3 status indicators 8 port indicators 2 status indicators
MAC ID management, bandwidth alarming, port control, link status, scaled bandwidth information, and connections active VLAN, IGMP snooping, IGMP query V1 and V2, DHCP server, BOOTP server, QoS, port mirroring 1 GB fiber-optic transceiver 2.2 A 50V (continuous), basic insulation type, power to ground and power to network channels No isolation between individual network channels Routine tested at 707V AC for 1 s RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.333.3 mm2 (2212 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater, 1.2 mm (3/64 in.) insulation max 3.3 mm2 (12 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater 1783-SFP1GSX 1783-SFP1GLX 1.36 Nm (12 lbin) on DC power and functional ground 2 - on DC power ports 2 - on Ethernet ports None (open-style) T4 T4
Ethernet connections DC power connections Functional ground connection SFP modules(1) Torque Wiring category(2) Enclosure type rating North American temp code IEC temp code
17

Attribute 1783-EMS04T, 1783-EMS08T
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Operating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Nonoperating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3
060 C (32140 F)
60 C (140 F) -4085 C (-40185 F)
595% noncondensing 2 g @ 10500 Hz 15 g 30 g Class A 6 kV contact discharges 8 kV air discharges 10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 1V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 2 kV at 5 kHz on power ports 1 kV at 5 kHz on Ethernet ports 1 kV line-line (DM) and 2 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on shielded Ethernet port 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 30 A/m long duration and 300A/m short duration at 50 and 60 Hz 10 ms interruption on DC supply ports
EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Magnetic field immunity IEC 61000-4-8 Voltage variation IEC 61000-4-29
18
Certifications - Stratix 6000 Switches

Certifications (when product is marked)(1) 1783-EMS04T, 1783-EMS08T
c-UL-us c-ETL-us CE
UL Listed Information Technology Equipment, certified for US and Canada. See UL File E151729. ETL Listed Industrial Control Equipment, certified for US and Canada. ETL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical Documentation Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements II 3 G Ex nA nL IIC T4 Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 ODVA conformance tested to EtherNet/IP specifications
C-Tick Ex
KC EtherNet/IP
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.

52.07 mm (2.05 in.)
118 mm (4.64 in.) 12 cm

(0.47 in.)
107 mm (4.21 in.)
12 mm (0.47 in.)
27.7 mm (1.09 in.)
SFP Module Installed
88.9 mm (3.50 in.)
Mount the switches, as shown, in the vertical position only. We do not recommend horizontal mounting due to thermal considerations. Follow these guidelines: Provide 50 mm (2 in.) of space on all sides for adequate heat dissipation. Leave 100 mm (4 in.) for installation and removal if using the fiber-optic port on the bottom of the 1783-EMS08T switch.
19
Embedded Switch Technology

Technical Specifications - EtherNet/IP Taps
Attribute Description 1783-ETAP EtherNet/IP tap 3 copper ports Copper 125 mA @ 24V DC 24V DC (20.427.6V DC) CL 2/SELV 30V (continuous), basic insulation type, network channels to power and network channels to network channels Type tested at 1250V DC for 60 s Power consumption, max Power dissipation Ethernet connections DC power connections Torque Wiring category(1) Enclosure type rating North American temp code IEC temp code
(1)
1783-ETAP1F EtherNet/IP tap 2 copper ports 1 fiber port Fiber, single-port 200 mA @ 24V DC
1783-ETAP2F EtherNet/IP tap 1 copper port 2 fiber ports Fiber, dual-port 260 mA @ 24V DC
Tap type Current consumption, max DC power supply voltage rating Isolation voltage
Type tested at 853V AC for 60 s 4.8 W 4.8 W 6.24 W 6.24 W
3W 3W
RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 One 0.333.3 mm2 (2212 AWG) or two 0.331.3 mm2 (2216 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater, 1.2 mm (3/64 in.) insulation max 0.60.8 Nm (57 lbin) on power connectors 1 - on power ports 2 - on communication ports None (open-style) T5 T5 T4A T4 T4 T4
Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Technical Specifications - EtherNet/IP Tap Fiber Connections

Attribute Fiber transceiver type Optical wavelength Transmitter launch power at Beginning of Life (BOL), min Allow -1 dB at End of Life (EOL) Receiver sensitivity, min Receiver sensitivity, max Fiber channel power budget at rated BER (2 connected taps, either 1783-ETAP1F or 1783-ETAP2F) Fiber connections 1783-ETAP1F, 1783-ETAP2F 100Base-FX IEEE802.3u 1310 nm no cap -19 dBm into 62.5/125 m fiber, N/A = 0.275 -22.5 dBm into 50/125 m fiber, N/A = 0.20 -31.8 dBm -14 dBm 12.8 dB for 62.5/125 m multimode fiber 9.3 dB for 50/125 m multimode fiber Glass 62.5/125 m and 50/125 m multimode fiber Simplex or duplex Jacket type and jacket diameter is dependent on connector selection Graded Index (GI) fiber Per IEC 60794-1-1, IEC 60793-2-10 category A1 fibers IEC 61754-20 LC connector, maximum insertion loss 0.75 dB per connection 2 km (1.24 mi) (1)
Connector type Channel length, max
(1) The channel, that is, connectors and cable, must not exceed the allowable power budget.
20
Environmental Specifications - EtherNet/IP Taps

Attribute Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold) IEC 60068-2-2 (Test Bd, Operating Dry Heat) IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2 Radiated RF immunity IEC 61000-4-3 1783-ETAP -2570 C (-13158 F) 1783-ETAP1F, 1783-ETAP2F -2560 C (-13140 F)
70 C (158 F) -4085 C (-40185 F)
60 C (140 F)
595% noncondensing 5 g @ 10500 Hz 30 g 50 g Class A 6 kV contact discharges 8 kV air discharges 10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 4 kV at 5 kHz on power ports 3 kV at 5 kHz on communication ports 1 kV line-line (DM) and 2 kV line-earth (CM) on power ports 2 kV line-earth (CM) on communication ports 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 10 ms interruption on DC supply ports
EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Voltage variation IEC 61000-4-29
21
Certifications - EtherNet/IP Taps

Certification(1) c-UL-us CE 1783-ETAP 1783-ETAP1F, 1783-ETAP2F
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A and B) European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical Documentation Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection n EN 60079-0; General Requirements II 3 G Ex nA IIC T5 X European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection n EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X
C-Tick Ex
KC EtherNet/IP
Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 ODVA conformance tested to EtherNet/IP specifications
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
22
Dimensions - EtherNet/IP Taps

This illustration shows dimensions for the 1783-ETAP tap. The dimensions for the 1783-ETAP1F and 1783-ETAP2F taps are the same.
122.68 mm (4.83 in.) 131.57 mm (5.18 in.)
104.9 mm (4.13 in.)
35.05 mm (1.38 in.)
23
Stratix 2000 Ethernet Unmanaged Switches

Attribute Description 1783-US03T01F Stratix 2000 unmanaged switch 3 copper ports 1 fiber port 2.2 A 20V AC (1024V AC) 24V DC (1035V DC) 30V (continuous), basic insulation type, power to network channels No isolation between individual network channels Type tested at 500V AC for 60 s 4 W (6VA) Current 400 mA @10V DC 1.52.5 mm2 (1614 AWG) solid or stranded copper wire rated at 75 C (167 F) or greater 1.2 mm (3/64 in.) insulation max 2 W @ 24V AC/DC 4.04 W @ 24V AC/DC 24V (18...60V DC, 18...30V AC 50/60 Hz), 361 mA, Class 2/SELV 1783-US06T01F Stratix 2000 unmanaged switch 6 copper ports 1 fiber port 1783-US05T Stratix 2000 unmanaged switch 5 copper ports 1783-US08T Stratix 2000 unmanaged switch 8 copper ports 1783-US5T Stratix 2000 unmanaged switch 5 copper ports 1783-US8T Stratix 2000 unmanaged switch 8 copper ports
Inrush current, max Power supply voltage Isolation voltage
Power consumption, max Ethernet connections DC power connections
RJ45 connector according to IEC 60603-7, 2- or 4-pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702 0.752.5 mm2 (1814 AWG) twisted-pair copper wire suitable for 30 C (86 F) above surrounding ambient temperature outside the enclosure Functional Earth connection: 2.5 mm2 (14 AWG) copper wire suitable for 86 F (30 C) above surrounding ambient temperature outside the enclosure, with a suitable ring terminal
Torque, max recommended Wiring category(1) Enclosure type rating North American temp code IEC temp code
0.8 Nm (7 lbin) on power connectors 2 - on power ports 2 - on communication ports None (open-style) T4 T4
1.82 Nm (16 lbin) on power /functional earth connector 1 - on power ports 2 - on communication ports
T5 T5
24
Technical Specifications - Stratix 2000 Fiber Connections

Attribute Ethernet data rate Connecting mode Optical wavelength Optical cable length, max Optical link budget Connector type Fiber connections 1783-US03T01F, 1783-US06T01F 100 Mbps Full duplex 1310 nm Graded index multimode fiber; 2000 m 8 db with 62.5/125 m multimode cable 4 db with 50/125 m multimode cable IEC 61754-20 LC connector Glass 62.5/125 m and 50/125 m multimode fiber Simplex or duplex Jacket type and jacket diameter is dependent on connector selection Graded Index (GI) fiber Per IEC 60794-1-1, IEC 60793-2-10 category A1 fibers

Attribute
1783-US06T01F 060 C (32140 F)
1783-US03T01F,1783US05T, 1783-US08T
1783-US5T
1783-US8T
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-6 (Test Fc, Operating) Operating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Nonoperating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR11 (IEC 61000-6-4) ESD immunity IEC 61000-4-2
60 C (140 F) -4085 C (-40185 F)
595% noncondensing 2 g @ 10500 Hz 15 g 30 g Class A 4 kV contact discharges 8 kV air discharges 6 kV contact discharges 8 kV air discharges 8 kV contact discharges 15 kV air discharges 6 kV contact discharges 8 kV air discharges 2 g @ 10150 Hz 2 g @ 10500 Hz
25

Attribute
1783-US06T01F
1783-US03T01F,1783US05T, 1783-US08T
1783-US5T
1783-US8T
Radiated RF immunity IEC 61000-4-3
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz 1V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 2 kV at 5 kHz on power ports 2 kV at 5 kHz on communication ports 1 kV line-line (DM) and 2 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on communication port
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 3V/m with 1 kHz sine-wave 80% AM from 20002700 MHz
EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6 Magnetic field immunity IEC 61000-4-8 Magnetic pulse immunity IEC 61000-4-9
4 kV at 5 kHz on power ports 3 kV at 5 kHz on communication ports 2 kV line-line (DM) and 4 kV line-earth (CM) on DC power ports 2 kV line-earth (CM) on communication port
10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz 30 A/m long duration and 300 A/m short duration at 50 Hz 30 A/m pulse
Certifications- Stratix 2000 Switches

Certifications (when product is marked)(1)
1783-US03T01F, 1783-US06T01F, 1783-US05T, 1783-US08T
1783-US5T, 1783-US8T
c-UL-us CE
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584. UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers (Clause 8, Zone A & B) European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical Documentation Australian Radiocommunications Act, compliant with: EN 61000-6.4; Industrial Emissions European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection n EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X European Union 94/9/EC ATEX Directive, compliant with: EN 60079-15; Potentially Explosive Atmospheres, Protection n EN 60079-0; General Requirements II 3 G Ex nA IIC T5 Gc
RCM Ex
KC EtherNet/IP
Korean Registration of Broadcasting and Communications Equipment, compliant with: Article 58-2 of Radio Waves Act, Clause 3 ODVA conformance tested to EtherNet/IP specifications
26

1783-US03T01F and 1783-US05T Switch Dimensions
P W R
108 mm (4.25 in.)

RX
3
TX
L I N K
127.8 mm (5.03 in.) 22.5 mm (0.89 in.)
The 1783-US06T01F and 1783-US08T switches have the same depth and height as the switches above, but they are 45 mm (1.77 in.) wide.
1783-US5T Switch Dimensions
100.8 mm (3.97 in.) 91.5 mm (3.6 in.) 30 mm (1.18 in.)
0.6 mm (0.02 in.) 35 mm (1.38 in.)
115 mm (4.53 in.)
1783-US03T01F
27
1783-US8T Switch Dimensions

53.6 mm (2.11 in.)
PWR
53.6 mm (2.11 in.)
106.5 mm (4.19 in.)
6 mm (0.24 in.)
35 mm (1.38 in.) 135 mm (5.31 in.)
1783-US8T
32312-M
28
Stratix 5900 Services Router

Technical Specifications - Stratix 5900 Services Router
Attribute 1783-SR
Input voltages Power consumption, max Isolation voltage Weight Wiring category(1) Enclosure type rating Router AC Power Adapter(2) Input voltage Power consumption, max Output power, max
5V, 4 A Class 2 Requires LITEON PA-1200-3SA4 power adapter (100...240V AC, 50/60Hz, 0.8A) 11 W Not rated 1.5 kg (3.2 lb) 3 - on power ports 2 - on Ethernet ports Meets IP41
85264V AC 100240V AC nom 25 W 20 W (5V DC, 4 A)
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1. (2) AC power adapter is not IP41 rated. Installation must include protection of the adapter and power plug from water.
Environmental Specifications - Stratix 5900 Services Router

Attribute 1783-SR
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock) Temperature, surrounding air, max Temperature, nonoperating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) Vibration IEC 60068-2-64 (Test Fh, Operating) Operating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Nonoperating shock IEC 60068-2-27 (Test Ea, Unpackaged Shock) Emissions CISPR22 (IEC 61000-6-4) ESD immunity IEC 61000-4-2
-2560 C (-13140 F)
60 C (140 F) -4085 C (-40185 F)
595% noncondensing 1.12 Grms random 15 g 15 g Class B 8 kV contact discharges 15 kV air discharges
29
Environmental Specifications - Stratix 5900 Services Router

Attribute 1783-SR
Radiated RF immunity IEC 61000-4-3 EFT/B immunity IEC 61000-4-4 Surge transient immunity IEC 61000-4-5 Conducted RF immunity IEC 61000-4-6
10V/m with 1 kHz sine-wave 80% AM from 802000 MHz 10V/m with 1 kHz sine-wave 80% AM from 20002700 MHz 500 kV at 5 kHz on Ethernet ports 1 kV line-earth (CM) on shielded Ethernet port 10V rms with 1 kHz sine-wave 80% AM from 150 kHz80 MHz
Certifications - Stratix 5900 Services Router

Certifications (when product is marked)(1) 1783-SR
c-UL-us CE
UL Listed Information Technology Equipment, certified for US and Canada. See UL File E136709. European Union 1999/5/EC R&TTE Directive, compliant with: EN 55022; ITE Emissions EN 55024; ITE Immunity EN 60950; ITE Safety European Union 2011/65/EU RoHS, compliant with: EN 50581; Technical documentation Australian Radiocommunications Act, compliant with: ACMA EMC Std 08 GB 4943. 1, GB 9254, YD/T993
C-Tick CCC
30
Dimensions - Stratix 5900 Services Router

44 mm (1.73 in.) 206 mm (8.1 in.)
196 mm (7.7 in.)
31
Accessories
Small Form-factor Pluggable (SFP) Transceivers
Cat. No. Description Wavelength Core Size/ Cladding Size (micron) 50/125 62.5/125 1783-SFP100LX 100 Base-LX single-mode transceiver 1310 nm G.652 Modal Bandwidth (MHz/km) 500 500 10 km (32.81 ft) Cable Length Compatibility
1783-SFP100FX
100 Base-FX multi-mode transceiver
1310 nm
2 km (6562 ft)
Stratix 5700 Stratix 8000 Stratix 8300 Stratix 5700 Stratix 8000 Stratix 8300 Stratix 6000 Stratix 5700 Stratix 8000 Stratix 8300 Stratix 6000 Stratix 5700 Stratix 8000 Stratix 8300
1783-SFP1GSX
1000 Base-SX multi-mode transceiver
850 nm
62.5/125 62.5/125 50/125 50/125
160 200 400 500
220 m (722 ft) 275 m (902 ft) 500 m (1640 ft) 550 m (1804 ft) 10 km (32.81 ft)
1783-SFP1GLX
1000 Base-LX/LH single-mode transceiver
1310 nm
G.652
Memory Cards
Cat. No. 1784-SD1 1783-MCF 1783-RMCF Description 1 GB industrial SD card Stratix 8000 CompactFlash card (spare) Stratix 8300 CompactFlash card (spare) Compatibility Stratix 5700 Stratix 8000 Stratix 8300
32
Ethernet Cable
Cat. No. 1585J-M8PBJM-2 1585J-M8PBJM-5 1585J-M8PBJM-10 1585J-M8CBJM-2 1585J-M8CBJM-5 1585J-M8CBJM-10 1585-C8CB-S100 1585-C8PB-S100 1585-C8PB-S300 1585-C8PB-S600 1585J-M8CC-SH Field attachable connector, IDC Unshielded Ethernet cable spool Shielded Ethernet cable spool Shielded (STP) RJ45 to RJ45 patchcord Description Unshielded (UTP) RJ45 to RJ45 patchcord Cable Length 2 m (6.56 ft) 5 m (16.41 ft) 10 m (32.81 ft) 2 m (6.56 ft) 5 m (16.41 ft) 10 m (32.81 ft) 100 m (328.08 ft) 100 m (328.08 ft) 300 m (984.25 ft) 600 m (1, 968.51 ft)
For additional Ethernet media choices, see On-Machine Connectivity Catalog, publication M117-CA001.
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource EtherNet/IP Industrial Protocol White Paper, publication ENET-WP001 Stratix 5700 Ethernet Managed Switch Installation Instructions, publication 1783-IN009 Stratix 5700 Ethernet Managed Switches User Manual, publication 1783-UM004 Stratix 8000 and 8300 Ethernet Managed Switches User Manual, publication 1783-UM003 Stratix 6000 Ethernet Managed Switch User Manual, publication 1783-UM001 Stratix 2000 Ethernet Unmanaged Switch Installation Instructions, publication 1783-IN001 Stratix 5900 Services Router User Manual, publication 1783-UM005 Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Product Certifications website, http://www.ab.com Provides general guidelines for installing a Rockwell Automation industrial system. Provides declarations of conformity, certificates, and other certification details. Description Describes how to implement services and data objects on a TCP/UDP/IP based Ethernet network. Provides details about installing and configuring the switch. Provides detailed information on configuring and managing the switches. Provides detailed information on configuring and managing the switches. Provides details about how to configure and use the switch. Provides details about installing and configuring the switch.
You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
33
Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards. Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/.
Allen-Bradley, Rockwell Software, Rockwell Automation, LISTEN.THINK.SOLVE, On-Machine, Stratix 2000, Stratix 5700, Stratix 5900, Stratix 6000, Stratix 8000, and Stratix 8300 are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400
www.rockwel lautomation.com
Power, Control and Information Solutions Headquarters
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444 Europe/Middle East/Africa: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640 Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Publication 1783-TD001E-EN-P - December 2013

Supersedes Publication 1783-TD001D-EN-P - June 2013 Copyright 2013 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

1783 td001 - en P

Uploaded by

Copyright:

Available Formats

1783 td001 - en P

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1783 td001 - en P

Uploaded by

Copyright:

Available Formats

Technical Data

Stratix Ethernet Device Specifications

Stratix Ethernet Device Specifications

Stratix 5700 Ethernet Managed Switches

Yes Yes Yes Yes Yes Yes Yes

Yes Yes Yes

1783-BMS12T4E2CGNK 18 1783-BMS20CL 1783-BMS20CA 1783-BMS20CGL 1783-BMS20CGP 1783-BMS20CGN 1783-BMS20CGPK 20 20 20 20 20 20

(1) FE = Fast Ethernet; GE = Gigabit Ethernet.

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

Technical Specifications - Stratix 5700 Switches

Alarm relay ratings Power requirements Power consumption Isolation voltage

Memory card Torque Weight, approx Wiring category(2)

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

Environmental Specifications - Stratix 5700 Switches

Stratix 5700 Switches -4060 C (-40140 F)

60 C (140 F) -4085 C (-40185 F)

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

Technical Specifications - Stratix 5700 Power over Ethernet Switches

Ethernet connections DC power connections Alarm connections

Ground connection SFP modules(1)

Memory card Torque Weight, approx Wiring category(2)

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

Environmental Specifications - Stratix 5700 Power over Ethernet Switches

1783-BMS12T4E2CGL, 1783-BMS12T4E2CGP, 1783-BMS12T4E2CGNK -4060 C (-40140 F)

60 C (140 F) -4085 C (-40185 F)

EFT/B immunity IEC 61000-4-4

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

Certifications - Stratix 5700 Switches

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

Dimensions - Stratix 5700 Switches

9.14 cm (3.6 in.)

12.95 cm (5.1 in.)

12.95 cm (5.1 in.)

11.67 cm (4.59 in.) 10.92 cm (4.3 in.)

0.75 cm (0.29 in.)

11.67 cm (4.59 in.) 10.92 cm (4.3 in.)

0.75 cm (0.29 in.)

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

10-port Switches (1783-BMS10CGP, 1783-BMS10CGN)

9.14 cm (3.6 in.)

12.95 cm (5.1 in.)

12.95 cm (5.1 in.)

13.58 cm (5.34 in.) 12.83 cm (5.05 in.)

0.75 cm (0.29 in.)

13.58 cm (5.34 in.) 12.83 cm (5.05 in.)

0.75 cm (0.29 in.)

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications

Stratix 8000 and Stratix 8300 Ethernet Managed Switches

Memory card Torque Wiring category(2)

Rockwell Automation Publication 1783-TD001E-EN-P - December 2013

Stratix Ethernet Device Specifications